Phase and group velocities for Lamb waves in DOP-26 iridium alloy sheet

International Nuclear Information System (INIS)

Simpson, W.A.; McGuire, D.J.

1994-07-01

The relatively coarse grain structure of iridium weldments limits the ultrasonic inspection of these structures to frequencies in the low megahertz range. As the material thickness is nominally 0.635 mm for clad vent set capsules, the low frequencies involved necessarily entail the generation of Lamb waves m the specimen. These waves are, of course, dispersive and detailed knowledge of both the phase and group velocities is required in order to determine accurately the location of flaws detected using Lamb waves. Purpose of this study is to elucidate the behavior of Lamb waves propagating in the capsule alloy and to quantify the velocities so that accurate flaw location is ensured. We describe a numerical technique for computing the phase velocities of Lamb waves (or of any other type of guided wave) and derive the group velocities from this information. A frequency-domain method is described for measuring group velocity when multiple Lamb modes are present and mutually interfering in the time domain, and experimental confirmation of the group velocity is presented for the capsule material

Quantitative Evaluation of Delamination in Composites Using Lamb Waves

Science.gov (United States)

Michalcová, L.; Hron, R.

2018-03-01

Ultrasonic guided wave monitoring has become very popular in the area of structural health monitoring (SHM) of aerospace structures. Any possible type of damage must be reliably assessed. The paper deals with delamination length determination in DCB specimens using Lamb waves. An analytical equation based on the velocity dependence on variable thickness is utilized. The group velocity of the fundamental antisymmetric A0 mode rapidly changes in a particular range of the frequency-thickness product. Using the same actuation frequency the propagation velocity is different for delaminated structure. Lamb wave based delamination lengths were compared to the visually determined lengths. The method of the wave velocity determination proved to be essential. More accurate results were achieved by tracking the maximum amplitude of A0 mode than the first signal arrival. These findings are considered as the basis for the damage evaluation of complex structures.

A Study on non-contact measurements of laser-generated lamb waves

International Nuclear Information System (INIS)

Jang, Tae Seong; Lee, Jung Ju; Lee, Seung Seok

2002-01-01

Generation and detection of Lamb waves offer an effective non-destructive testing technique that will detect defects quickly and reliably. Lamb waves are generated in a thin plate by Q-switched Nd:YAG pulsed laser. Symmetric and antisymmetric Lamb modes in low-frequency-thickness regime are excited by illuminating a thin plate with an array of laser-generated line sources. The propagation of laser-generated Lamb waves is detected by measuring the out-of-plane displacements in a non-contact manner using the fiber optic Sagnac interferometer and all commercial adaptive reference-beam interferometer. The characteristics of laser-generated Lamb wave due to its frequency are investigated. Fundamental understanding of laser-generated Lamb modes is presented.

Lamb Wave Damage Quantification Using GA-Based LS-SVM

Directory of Open Access Journals (Sweden)

Fuqiang Sun

2017-06-01

Full Text Available Lamb waves have been reported to be an efficient tool for non-destructive evaluations (NDE for various application scenarios. However, accurate and reliable damage quantification using the Lamb wave method is still a practical challenge, due to the complex underlying mechanism of Lamb wave propagation and damage detection. This paper presents a Lamb wave damage quantification method using a least square support vector machine (LS-SVM and a genetic algorithm (GA. Three damage sensitive features, namely, normalized amplitude, phase change, and correlation coefficient, were proposed to describe changes of Lamb wave characteristics caused by damage. In view of commonly used data-driven methods, the GA-based LS-SVM model using the proposed three damage sensitive features was implemented to evaluate the crack size. The GA method was adopted to optimize the model parameters. The results of GA-based LS-SVM were validated using coupon test data and lap joint component test data with naturally developed fatigue cracks. Cases of different loading and manufacturer were also included to further verify the robustness of the proposed method for crack quantification.

Lamb Wave Damage Quantification Using GA-Based LS-SVM.

Science.gov (United States)

Sun, Fuqiang; Wang, Ning; He, Jingjing; Guan, Xuefei; Yang, Jinsong

2017-06-12

Lamb waves have been reported to be an efficient tool for non-destructive evaluations (NDE) for various application scenarios. However, accurate and reliable damage quantification using the Lamb wave method is still a practical challenge, due to the complex underlying mechanism of Lamb wave propagation and damage detection. This paper presents a Lamb wave damage quantification method using a least square support vector machine (LS-SVM) and a genetic algorithm (GA). Three damage sensitive features, namely, normalized amplitude, phase change, and correlation coefficient, were proposed to describe changes of Lamb wave characteristics caused by damage. In view of commonly used data-driven methods, the GA-based LS-SVM model using the proposed three damage sensitive features was implemented to evaluate the crack size. The GA method was adopted to optimize the model parameters. The results of GA-based LS-SVM were validated using coupon test data and lap joint component test data with naturally developed fatigue cracks. Cases of different loading and manufacturer were also included to further verify the robustness of the proposed method for crack quantification.

Pipe Wall Thinning Evaluation through the Arrival Time Delay of A0 Lamb Wave Using Magnetostrictive Patch Transducers

Energy Technology Data Exchange (ETDEWEB)

Cho, Seung Hyun; Kwon, Hyu Sang; Ahn, Bong Young; Lee, Seung Seok [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

2008-12-15

Guided wave technology is advantageous for fast inspection of pipe wall thinning since the guided wave propagates long distance. In this investigation, the method to evaluate gradual wall thinning in a pipe based on the arrival time delay with magnetostrictive patch transducers is presented. Low frequency A0 Lamb waves were generated and measured by the present transducer and it was applied to arrival time delay measurement experiments on a test pipe having gradual wall thinnings artificially manufactured. From experiments, consistent results that wall thinning increases the arrival time delay of A0 waves were obtained. Consequently, the feasibility of the magnetostrictive patch transducers to evaluate wall thinning was verified

Pipe Wall Thinning Evaluation through the Arrival Time Delay of A0 Lamb Wave Using Magnetostrictive Patch Transducers

International Nuclear Information System (INIS)

Cho, Seung Hyun; Kwon, Hyu Sang; Ahn, Bong Young; Lee, Seung Seok

2008-01-01

Guided wave technology is advantageous for fast inspection of pipe wall thinning since the guided wave propagates long distance. In this investigation, the method to evaluate gradual wall thinning in a pipe based on the arrival time delay with magnetostrictive patch transducers is presented. Low frequency A0 Lamb waves were generated and measured by the present transducer and it was applied to arrival time delay measurement experiments on a test pipe having gradual wall thinnings artificially manufactured. From experiments, consistent results that wall thinning increases the arrival time delay of A0 waves were obtained. Consequently, the feasibility of the magnetostrictive patch transducers to evaluate wall thinning was verified

Quantitative Estimation of Transmitted and Reflected Lamb Waves at Discontinuity

International Nuclear Information System (INIS)

Lim, Hyung Jin; Sohn, Hoon

2010-01-01

For the application of Lamb wave to structural health monitoring(SHM), understanding its physical characteristic and interaction between Lamb wave and defect of the host structure is an important issue. In this study, reflected, transmitted and mode converted Lamb waves at discontinuity of a plate structure were simulated and the amplitude ratios are calculated theoretically using Modal decomposition method. The predicted results were verified comparing with finite element method(FEM) and experimental results simulating attached PZTs. The result shows that the theoretical prediction is close to the FEM and the experimental verification. Moreover, quantitative estimation method was suggested using amplitude ratio of Lamb wave at discontinuity

Lamb wave tuning curve calibration for surface-bonded piezoelectric transducers

International Nuclear Information System (INIS)

Sohn, Hoon; Lee, Sang Jun

2010-01-01

Surface-bonded lead zirconate titanate (PZT) transducers have been widely used for guided wave generation and measurement. For selective actuation and sensing of Lamb wave modes, the sizes of the transducers and the driving frequency of the input waveform should be tuned. For this purpose, a theoretical Lamb wave tuning curve (LWTC) of a specific transducer size is generally obtained. Here, the LWTC plots each Lamb wave mode' amplitude as a function of the driving frequency. However, a discrepancy between experimental and existing theoretical LWTCs has been observed due to little consideration of the bonding layer and the energy distribution between Lamb wave modes. In this study, calibration techniques for theoretical LWTCs are proposed. First, a theoretical LWTC is developed when circular PZT transducers are used for both Lamb wave excitation and sensing. Then, the LWTC is calibrated by estimating the effective PZT size with PZT admittance measurement. Finally, the energy distributions among symmetric and antisymmetric modes are taken into account for better prediction of the relative amplitudes between Lamb wave modes. The effectiveness of the proposed calibration techniques is examined through numerical simulations and experimental estimation of the LWTC using the circular PZT transducers instrumented on an aluminum plate

Using Ultrasonic Lamb Waves To Measure Moduli Of Composites

Science.gov (United States)

Kautz, Harold E.

1995-01-01

Measurements of broad-band ultrasonic Lamb waves in plate specimens of ceramic-matrix/fiber and metal-matrix/fiber composite materials used to determine moduli of elasticity of materials. In one class of potential applications of concept, Lamb-wave responses of specimens measured and analyzed at various stages of thermal and/or mechanical processing to determine effects of processing, without having to dissect specimens. In another class, structural components having shapes supporting propagation of Lamb waves monitored ultrasonically to identify signs of deterioration and impending failure.

Attenuation Analysis of Lamb Waves Using the Chirplet Transform

NARCIS (Netherlands)

Kerber, Florian; Sprenger, Helge; Niethammer, Marc; Luangvilai, Kritsakorn; Jacobs, Laurence J.

2010-01-01

Guided Lamb waves are commonly used in nondestructive evaluation to monitor plate-like structures or to characterize properties of composite or layered materials. However, the dispersive propagation and multimode excitability of Lamb waves complicate their analysis. Advanced signal processing

The numerical simulation of Lamb wave propagation in laser welding of stainless steel

Science.gov (United States)

Zhang, Bo; Liu, Fang; Liu, Chang; Li, Jingming; Zhang, Baojun; Zhou, Qingxiang; Han, Xiaohui; Zhao, Yang

2017-12-01

In order to explore the Lamb wave propagation in laser welding of stainless steel, the numerical simulation is used to show the feature of Lamb wave. In this paper, according to Lamb dispersion equation, excites the Lamb wave on the edge of thin stainless steel plate, and presents the reflection coefficient for quantizing the Lamb wave energy, the results show that the reflection coefficient is increased with the welding width increasing,

Intelligent feature selection techniques for pattern classification of Lamb wave signals

International Nuclear Information System (INIS)

Hinders, Mark K.; Miller, Corey A.

2014-01-01

Lamb wave interaction with flaws is a complex, three-dimensional phenomenon, which often frustrates signal interpretation schemes based on mode arrival time shifts predicted by dispersion curves. As the flaw severity increases, scattering and mode conversion effects will often dominate the time-domain signals, obscuring available information about flaws because multiple modes may arrive on top of each other. Even for idealized flaw geometries the scattering and mode conversion behavior of Lamb waves is very complex. Here, multi-mode Lamb waves in a metal plate are propagated across a rectangular flat-bottom hole in a sequence of pitch-catch measurements corresponding to the double crosshole tomography geometry. The flaw is sequentially deepened, with the Lamb wave measurements repeated at each flaw depth. Lamb wave tomography reconstructions are used to identify which waveforms have interacted with the flaw and thereby carry information about its depth. Multiple features are extracted from each of the Lamb wave signals using wavelets, which are then fed to statistical pattern classification algorithms that identify flaw severity. In order to achieve the highest classification accuracy, an optimal feature space is required but it’s never known a priori which features are going to be best. For structural health monitoring we make use of the fact that physical flaws, such as corrosion, will only increase over time. This allows us to identify feature vectors which are topologically well-behaved by requiring that sequential classes “line up” in feature vector space. An intelligent feature selection routine is illustrated that identifies favorable class distributions in multi-dimensional feature spaces using computational homology theory. Betti numbers and formal classification accuracies are calculated for each feature space subset to establish a correlation between the topology of the class distribution and the corresponding classification accuracy

Temperature effects on the band gaps of Lamb waves in a one-dimensional phononic-crystal plate (L).

Science.gov (United States)

Cheng, Y; Liu, X J; Wu, D J

2011-03-01

This study investigates the temperature-tuned band gaps of Lamb waves in a one-dimensional phononic-crystal plate, which is formed by alternating strips of ferroelectric ceramic Ba(0.7)Sr(0.3)TiO(3) and epoxy. The sensitive and continuous temperature-tunability of Lamb wave band gaps is demonstrated using the analyses of the band structures and the transmission spectra. The width and position of Lamb wave band gaps shift prominently with variation of temperature in the range of 26 °C-50 °C. For example, the width of the second band gap increases from 0.066 to 0.111 MHz as the temperature is increased from 26 °C to 50 °C. The strong shift promises that the structure could be suitable for temperature-tuned multi-frequency Lamb wave filters. © 2011 Acoustical Society of America

Time reversed Lamb wave for damage detection in a stiffened aluminum plate

International Nuclear Information System (INIS)

Bijudas, C R; Mitra, M; Mujumdar, P M

2013-01-01

According to the concept of time reversibility of the Lamb wave, in the absence of damage, a Lamb wave signal can be reconstructed at the transmitter location if a time reversed signal is sent back from the receiver location. This property is used for baseline-free damage detection, where the presence of damage breaks down the time reversibility and the mismatch between the reconstructed and the input signal is inferred as the presence of damage. This paper presents an experimental and a simulation study of baseline-free damage detection in a stiffened aluminum plate by time reversed Lamb wave (TRLW). In this study, single Lamb wave mode (A 0 ) is generated and sensed using piezoelectric (PZT) transducers through specific transducer placement and amplitude tuning. Different stiffening configurations such as plane and T-stiffeners are considered. Damage cases of disbonding of stiffeners from the base plate, and vertical and embedded cracks in the stiffened plate, are studied. The results show that TRLW based schemes can efficiently identify the presence of damage in a stiffened plate. (paper)

A Fatigue Crack Size Evaluation Method Based on Lamb Wave Simulation and Limited Experimental Data

Directory of Open Access Journals (Sweden)

Jingjing He

2017-09-01

Full Text Available This paper presents a systematic and general method for Lamb wave-based crack size quantification using finite element simulations and Bayesian updating. The method consists of construction of a baseline quantification model using finite element simulation data and Bayesian updating with limited Lamb wave data from target structure. The baseline model correlates two proposed damage sensitive features, namely the normalized amplitude and phase change, with the crack length through a response surface model. The two damage sensitive features are extracted from the first received S0 mode wave package. The model parameters of the baseline model are estimated using finite element simulation data. To account for uncertainties from numerical modeling, geometry, material and manufacturing between the baseline model and the target model, Bayesian method is employed to update the baseline model with a few measurements acquired from the actual target structure. A rigorous validation is made using in-situ fatigue testing and Lamb wave data from coupon specimens and realistic lap-joint components. The effectiveness and accuracy of the proposed method is demonstrated under different loading and damage conditions.

Design and fabrication of an AT-cut quartz phononic Lamb wave resonator

International Nuclear Information System (INIS)

Hung, Chia-Hao; Liu, Ting-Wei; Wu, Tsung-Tsong; Wang, Wei-Shan; Esashi, Masayoshi; Lin, Yu-Ching; Sun, Jia-Hong; Chen, Yung-Yu

2013-01-01

This paper presents results on the design and fabrication of an AT-cut quartz Lamb wave resonator with phononic crystal (PC) reflective gratings. The deep reactive ion etching process with a laboratory-made etcher was utilized to fabricate PC structures of the AT-cut quartz Lamb wave resonator. The finite element method was adopted to calculate the PC band structure, effective reflective distance from the PC boundary and further the resonant modes and admittance of the phononic Lamb wave resonant cavity. Through the comparison studies between the experimental and simulated results, a design process for the AT-cut quartz phononic Lamb wave resonator was proposed. It is noted that by using the phononic reflectors, the size of the Lamb wave resonator can be reduced significantly. (paper)

Damage detection using piezoelectric transducers and the Lamb wave approach: I. System analysis

International Nuclear Information System (INIS)

Wang, X; Lu, Y; Tang, J

2008-01-01

Structural damage detection using piezoelectric transducers and the Lamb wave approach has been under intensive investigations. A commonly pursued topic is the selection of system parameters such that the detection performance can be optimized. Previous studies have indicated that the excitation center frequency plays a critical role, and suggested use of the 'sweet spot' frequency to maximize the peak wave amplitude ratio between the S 0 and the A 0 modes. In this paper, the analytical formulation of Lamb wave propagation on a narrow-strip beam excited and sensed by piezoelectric transducers is outlined first. Then, the antisymmetric and symmetric contents of the wave propagation response are analyzed in detail with respect to system parameters. In particular, the parametric influence on the 'sweet spot' frequency is investigated systematically. The complicated interaction of the wave components with respect to damage is illustrated through case studies. The analytical study is supported by numerical analysis using the finite element method and by experimental investigation. This research provides the mechanistic basis for robust damage detection using data processing and statistical analysis tools which is the focus of the second paper of this two-paper series

Study of Lamb Waves for Non-Destructive Testing Behind Screens

Science.gov (United States)

Kauffmann, P.; Ploix, M.-A.; Chaix, J.-F.; Gueudré, C.; Corneloup, G.; Baqué, F. AF(; )

2018-01-01

The inspection and control of sodium-cooled fast reactors (SFR) is a major issue for the nuclear industry. Ultrasonic solutions are under study because of the opacity of liquid sodium. In this paper, the use of leaky Lamb waves is considered for non-destructive testing (NDT) on parallel and immersed structures assimilated as plates. The first phase of our approach involved studying the propagation properties of leaky Lamb waves. Equations that model the propagation of Lamb waves in an immersed plate were solved numerically. The phase velocity can be experimentally measured using a two dimensional Fourier transform. The group velocity can be experimentally measured using a short-time Fourier transform technique. Attenuation of leaky Lamb waves is mostly due to the re-emission of energy into the surrounding fluid, and it can be measured by these two techniques.

Detecting Lamb waves with broadband acousto-ultrasonic signals in composite structures

Science.gov (United States)

Kautz, Harold E.

1992-01-01

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and lowest antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave disperison curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMCs, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Experimental Study on Corrosion Detection of Aluminum Alloy Using Lamb Wave Mixing Technique

Energy Technology Data Exchange (ETDEWEB)

Choi, Heeung; Lee, Jaesun; Cho, Younho [Pusan Nat’l Univ., Busan (Korea, Republic of)

2016-11-15

In this study, the Lamb wave mixing technique, which is basised on advanced research on the nonlinear bulk wave mixing technique, is applied for corrosion detection. To demonstrate the validity of the Lamb wave mixing technique, an experiment was performed with normal and corroded specimens. Comparison group in an experimentation are selected to mode and frequency with dominant in-plane displacement and out-of-plane displacement of Lamb waves. The results showed that the Lamb wave mixing technique can monitor corrosion defects, and it has a trend similar to that of the conventional Lamb wave technique. It was confirmed that the dominant displacement and mode matching the theory were generated. Flaw detectability is determined depending on displacement ratio instead of using the measurement method and mode selection.

On Lamb and Rayleigh wave convergence in viscoelastic tissues

Energy Technology Data Exchange (ETDEWEB)

Nenadic, Ivan Z; Urban, Matthew W; Aristizabal, Sara; Mitchell, Scott A; Humphrey, Tye C; Greenleaf, James F, E-mail: Nenadic.Ivan@mayo.edu [Department of Biomedical Engineering, Mayo Clinic College of Medicine, Rochester, MN, 55905 (United States)

2011-10-21

Characterization of the viscoelastic material properties of soft tissue has become an important area of research over the last two decades. Our group has been investigating the feasibility of using a shear wave dispersion ultrasound vibrometry (SDUV) method to excite Lamb waves in organs with plate-like geometry to estimate the viscoelasticity of the medium of interest. The use of Lamb wave dispersion ultrasound vibrometry to quantify the mechanical properties of viscoelastic solids has previously been reported. Two organs, the heart wall and the spleen, can be readily modeled using plate-like geometries. The elasticity of these two organs is important because they change in pathological conditions. Diastolic dysfunction is the inability of the left ventricle (LV) of the heart to supply sufficient stroke volumes into the systemic circulation and is accompanied by the loss of compliance and stiffening of the LV myocardium. It has been shown that there is a correlation between high splenic stiffness in patients with chronic liver disease and strong correlation between spleen and liver stiffness. Here, we investigate the use of the SDUV method to quantify the viscoelasticity of the LV free-wall myocardium and spleen by exciting Rayleigh waves on the organ's surface and measuring the wave dispersion (change of wave velocity as a function of frequency) in the frequency range 40-500 Hz. An equation for Rayleigh wave dispersion due to cylindrical excitation was derived by modeling the excised myocardium and spleen with a homogenous Voigt material plate immersed in a nonviscous fluid. Boundary conditions and wave potential functions were solved for the surface wave velocity. Analytical and experimental convergence between the Lamb and Rayleigh waves is reported in a finite element model of a plate in a fluid of similar density, gelatin plate and excised porcine spleen and left-ventricular free-wall myocardium.

Creep Damage Evaluation of Titanium Alloy Using Nonlinear Ultrasonic Lamb Waves

International Nuclear Information System (INIS)

Xiang Yan-Xun; Xuan Fu-Zhen; Deng Ming-Xi; Chen Hu; Chen Ding-Yue

2012-01-01

The creep damage in high temperature resistant titanium alloys Ti60 is measured using the nonlinear effect of an ultrasonic Lamb wave. The results show that the normalised acoustic nonlinearity of a Lamb wave exhibits a variation of the 'increase-decrease' tendency as a function of the creep damage. The influence of microstructure evolution on the nonlinear Lamb wave propagation has been analyzed based on metallographic studies, which reveal that the normalised acoustic nonlinearity increases due to a rising of the precipitation volume fraction and the dislocation density in the early stage, and it decreases as a combined result of dislocation change and micro-void initiation in the material. The nonlinear Lamb wave exhibits the potential for the assessment of the remaining creep life in metals

PZT-on-silicon RF-MEMS Lamb wave resonators and filters

NARCIS (Netherlands)

Yagubizade, H.

2013-01-01

Lamb-wave piezoelectric RF-MEMS resonators have demonstrated promising performance, such as low motional impedance and high Q-factor. Lamb-wave resonators are still in the perfectioning state and therefore there is a great demand for further understanding of various issues such as reducing the

Thickness Measurement of Surface Attachment on Plate with Lamb Wave

Science.gov (United States)

Ma, Xianglong; Zhang, Yinghong; Wen, Lichao; He, Yehu

2017-12-01

Aiming at the thickness detection of the plate surface attachment, a nondestructive testing method based on the Lamb wave is presented. This method utilizes Lamb wave propagation characteristics of signals in a bi-layer medium to measure the surface attachment plate thickness. Propagation of Lamb wave in bi-layer elastic is modeled and analyzed. The two-dimensional simulation model of electromagnetic ultrasonic plate - scale is established. The simulation is conducted by software COMSOL for simulation analysis under different boiler scale thickness wave form curve. Through this study, the thickness of the attached material can be judged by analyzing the characteristics of the received signal when the thickness of the surface of the plate is measured.

Lamb waves increase sensitivity in nondestructive testing

Science.gov (United States)

Di Novi, R.

1967-01-01

Lamb waves improve sensitivity and resolution in the detection of small defects in thin plates and small diameter, thin-walled tubing. This improvement over shear waves applies to both longitudinal and transverse flaws in the specimens.

Lamb Wave Technique for Ultrasonic Nonlinear Characterization in Elastic Plates

International Nuclear Information System (INIS)

Lee, Tae Hun; Kim, Chung Seok; Jhang, Kyung Young

2010-01-01

Since the acoustic nonlinearity is sensitive to the minute variation of material properties, the nonlinear ultrasonic technique(NUT) has been considered as a promising method to evaluate the material degradation or fatigue. However, there are certain limitations to apply the conventional NUT using the bulk wave to thin plates. In case of plates, the use of Lamb wave can be considered, however, the propagation characteristics of Lamb wave are completely different with the bulk wave, and thus the separate study for the nonlinearity of Lamb wave is required. For this work, this paper analyzed first the conditions of mode pair suitable for the practical application as well as for the cumulative propagation of quadratic harmonic frequency and summarized the result in for conditions: phase matching, non-zero power flux, group velocity matching, and non-zero out-of-plane displacement. Experimental results in aluminum plates showed that the amplitude of the secondary Lamb wave and nonlinear parameter grew up with increasing propagation distance at the mode pair satisfying the above all conditions and that the ration of nonlinear parameters measured in Al6061-T6 and Al1100-H15 was closed to the ratio of the absolute nonlinear parameters

Antisymmetric-Symmetric Mode Conversion of Ultrasonic Lamb Waves and Negative Refraction on Thin Steel Plate

International Nuclear Information System (INIS)

Kim, Young H.; Sung, Jin Woo

2013-01-01

In this study, focusing of ultrasonic Lamb wave by negative refraction with mode conversion from antisymmetric to symmetric mode was investigated. When a wave propagates backward by negative refraction, the energy flux is antiparallel to the phase velocity. Backward propagation of Lamb wave is quite well known, but the behavior of backward Lamb wave at an interface has rarely been investigated. A pin-type transducer is used to detect Lamb wave propagating on a steel plate with a step change in thickness. Conversion from forward to backward propagating mode leads to negative refraction and thus wave focusing. By comparing the amplitudes of received Lamb waves at a specific frequency measured at different distance between transmitter and interface, the focusing of Lamb wave due to negative refraction was confirmed.

Cointegration approach for temperature effect compensation in Lamb-wave-based damage detection

International Nuclear Information System (INIS)

Dao, Phong B; Staszewski, Wieslaw J

2013-01-01

Lamb waves are often used in smart structures with integrated, low-profile piezoceramic transducers for damage detection. However, it is well known that the method is prone to contamination from a variety of interference sources including environmental and operational conditions. The paper demonstrates how to remove the undesired temperature effect from Lamb wave data. The method is based on the concept of cointegration that is partially built on the analysis of the non-stationary behaviour of time series. Instead of directly using Lamb wave responses for damage detection, two approaches are proposed: (i) analysis of cointegrating residuals obtained from the cointegration process of Lamb wave responses, (ii) analysis of stationary characteristics of Lamb wave responses before and after cointegration. The method is tested on undamaged and damaged aluminium plates exposed to temperature variations. The experimental results show that the method can: isolate damage-sensitive features from temperature variations, detect the existence of damage and classify its severity. (paper)

Quantitative damage imaging using Lamb wave diffraction tomography

International Nuclear Information System (INIS)

Zhang Hai-Yan; Ruan Min; Zhu Wen-Fa; Chai Xiao-Dong

2016-01-01

In this paper, we investigate the diffraction tomography for quantitative imaging damages of partly through-thickness holes with various shapes in isotropic plates by using converted and non-converted scattered Lamb waves generated numerically. Finite element simulations are carried out to provide the scattered wave data. The validity of the finite element model is confirmed by the comparison of scattering directivity pattern (SDP) of circle blind hole damage between the finite element simulations and the analytical results. The imaging method is based on a theoretical relation between the one-dimensional (1D) Fourier transform of the scattered projection and two-dimensional (2D) spatial Fourier transform of the scattering object. A quantitative image of the damage is obtained by carrying out the 2D inverse Fourier transform of the scattering object. The proposed approach employs a circle transducer network containing forward and backward projections, which lead to so-called transmission mode (TMDT) and reflection mode diffraction tomography (RMDT), respectively. The reconstructed results of the two projections for a non-converted S0 scattered mode are investigated to illuminate the influence of the scattering field data. The results show that Lamb wave diffraction tomography using the combination of TMDT and RMDT improves the imaging effect compared with by using only the TMDT or RMDT. The scattered data of the converted A0 mode are also used to assess the performance of the diffraction tomography method. It is found that the circle and elliptical shaped damages can still be reasonably identified from the reconstructed images while the reconstructed results of other complex shaped damages like crisscross rectangles and racecourse are relatively poor. (special topics)

Lamb Wave Line Sensing for Crack Detection in a Welded Stiffener

Directory of Open Access Journals (Sweden)

Yun-Kyu An

2014-07-01

Full Text Available This paper proposes a novel Lamb wave line sensing technique for crack detection in a welded stiffener. The proposed technique overcomes one of the biggest technical challenges of Lamb wave crack detection for real structure applications: crack-induced Lamb waves are often mixed with multiple reflections from complex waveguides. In particular, crack detection in a welded joint, one of the structural hot spots due to stress concentration, is accompanied by reflections from the welded joint as well as a crack. Extracting and highlighting crack-induced Lamb wave modes from Lamb wave responses measured at multi-spatial points along a single line can be accomplished through a frequency-wavenumber domain analysis. The advantages of the proposed technique enable us not only to enhance the crack detectability in the welded joint but also to minimize false alarms caused by environmental and operational variations by avoiding the direct comparison with the baseline data previously accumulated from the pristine condition of a target structure. The proposed technique is experimentally and numerically validated in vertically stiffened metallic structures, revealing that it successfully identifies and localizes subsurface cracks, regardless of the coexistence with the vertical stiffener.

Detecting Lamb waves with broad-band acousto-ultrasonic signals in composite structures

Science.gov (United States)

Kautz, Harold E.

1992-01-01

Lamb waves can be produced and detected in ceramic matrix composites (CMC) and metal matrix composites (MMC) plates using the acousto-ultrasonic configuration employing broadband transducers. Experimental dispersion curves of lowest symmetric and antisymmetric modes behave in a manner analogous to the graphite/polymer theoretical curves. In this study a basis has been established for analyzing Lamb wave velocities for characterizing composite plates. Lamb wave dispersion curves and group velocities were correlated with variations in axial stiffness and shear stiffness in MMC and CMC. For CMC, interfacial shear strength was also correlated with the first antisymmetric Lamb mode.

Lamb wave characterization of the effects of long-term thermal-mechanical aging on composite stiffness

Science.gov (United States)

Seale, M. D.; Madaras, E. I.

1999-01-01

Lamb waves offer a promising method of evaluating damage in composite materials. The Lamb wave velocity is directly related to the material parameters, so an effective tool exists to monitor damage in composites by measuring the velocity of these waves. The Lamb Wave Imager (LWI) uses a pulse/receive technique that excites an antisymmetric Lamb mode and measures the time-of-flight over a wide frequency range. Given the material density and plate thickness, the bending and out-of-plane shear stiffnesses are calculated from a reconstruction of the dispersion curve. In this study, the time-of-flight as well as the elastic stiffnesses D11, D22, A44, and A55 for composite samples which have undergone combined thermal and mechanical aging are obtained. The samples examined include a baseline specimen with 0 cycles, specimens which have been aged 2350 and 3530 cycles at high strain levels, and one specimen aged 3530 cycles at low strain levels.

Crack Detection with Lamb Wave Wavenumber Analysis

Science.gov (United States)

Tian, Zhenhua; Leckey, Cara; Rogge, Matt; Yu, Lingyu

2013-01-01

In this work, we present our study of Lamb wave crack detection using wavenumber analysis. The aim is to demonstrate the application of wavenumber analysis to 3D Lamb wave data to enable damage detection. The 3D wavefields (including vx, vy and vz components) in time-space domain contain a wealth of information regarding the propagating waves in a damaged plate. For crack detection, three wavenumber analysis techniques are used: (i) two dimensional Fourier transform (2D-FT) which can transform the time-space wavefield into frequency-wavenumber representation while losing the spatial information; (ii) short space 2D-FT which can obtain the frequency-wavenumber spectra at various spatial locations, resulting in a space-frequency-wavenumber representation; (iii) local wavenumber analysis which can provide the distribution of the effective wavenumbers at different locations. All of these concepts are demonstrated through a numerical simulation example of an aluminum plate with a crack. The 3D elastodynamic finite integration technique (EFIT) was used to obtain the 3D wavefields, of which the vz (out-of-plane) wave component is compared with the experimental measurement obtained from a scanning laser Doppler vibrometer (SLDV) for verification purposes. The experimental and simulated results are found to be in close agreement. The application of wavenumber analysis on 3D EFIT simulation data shows the effectiveness of the analysis for crack detection. Keywords: : Lamb wave, crack detection, wavenumber analysis, EFIT modeling

ANALYTICAL SOLUTION FOR WAVES IN PLANETS WITH ATMOSPHERIC SUPERROTATION. II. LAMB, SURFACE, AND CENTRIFUGAL WAVES

International Nuclear Information System (INIS)

Peralta, J.; López-Valverde, M. A.; Imamura, T.; Read, P. L.; Luz, D.; Piccialli, A.

2014-01-01

This paper is the second in a two-part study devoted to developing tools for a systematic classification of the wide variety of atmospheric waves expected on slowly rotating planets with atmospheric superrotation. Starting with the primitive equations for a cyclostrophic regime, we have deduced the analytical solution for the possible waves, simultaneously including the effect of the metric terms for the centrifugal force and the meridional shear of the background wind. In those cases where the conditions for the method of the multiple scales in height are met, these wave solutions are also valid when vertical shear of the background wind is present. A total of six types of waves have been found and their properties were characterized in terms of the corresponding dispersion relations and wave structures. In this second part, we study the waves' solutions when several atmospheric approximations are applied: Lamb, surface, and centrifugal waves. Lamb and surface waves are found to be quite similar to those in a geostrophic regime. By contrast, centrifugal waves turn out to be a special case of Rossby waves that arise in atmospheres in cyclostrophic balance. Finally, we use our results to identify the nature of the waves behind atmospheric periodicities found in polar and lower latitudes of Venus's atmosphere

ANALYTICAL SOLUTION FOR WAVES IN PLANETS WITH ATMOSPHERIC SUPERROTATION. II. LAMB, SURFACE, AND CENTRIFUGAL WAVES

Energy Technology Data Exchange (ETDEWEB)

Peralta, J.; López-Valverde, M. A. [Instituto de Astrofísica de Andalucía (CSIC), Glorieta de la Astronomía, 18008 Granada (Spain); Imamura, T. [Institute of Space and Astronautical Science-Japan Aerospace Exploration Agency 3-1-1, Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan); Read, P. L. [Clarendon Laboratory, Department of Physics, University of Oxford, Parks Road, Oxford (United Kingdom); Luz, D. [Centro de Astronomia e Astrofísica da Universidade de Lisboa (CAAUL), Observatório Astronómico de Lisboa, Tapada da Ajuda, 1349-018 Lisboa (Portugal); Piccialli, A., E-mail: peralta@iaa.es [LATMOS, UVSQ, 11 bd dAlembert, 78280 Guyancourt (France)

2014-07-01

This paper is the second in a two-part study devoted to developing tools for a systematic classification of the wide variety of atmospheric waves expected on slowly rotating planets with atmospheric superrotation. Starting with the primitive equations for a cyclostrophic regime, we have deduced the analytical solution for the possible waves, simultaneously including the effect of the metric terms for the centrifugal force and the meridional shear of the background wind. In those cases where the conditions for the method of the multiple scales in height are met, these wave solutions are also valid when vertical shear of the background wind is present. A total of six types of waves have been found and their properties were characterized in terms of the corresponding dispersion relations and wave structures. In this second part, we study the waves' solutions when several atmospheric approximations are applied: Lamb, surface, and centrifugal waves. Lamb and surface waves are found to be quite similar to those in a geostrophic regime. By contrast, centrifugal waves turn out to be a special case of Rossby waves that arise in atmospheres in cyclostrophic balance. Finally, we use our results to identify the nature of the waves behind atmospheric periodicities found in polar and lower latitudes of Venus's atmosphere.

Lamb wave propagation in monocrystalline silicon wafers

OpenAIRE

Fromme, P.; Pizzolato, M.; Robyr, J-L; Masserey, B.

2018-01-01

Monocrystalline silicon wafers are widely used in the photovoltaic industry for solar panels with high conversion efficiency. Guided ultrasonic waves offer the potential to efficiently detect micro-cracks in the thin wafers. Previous studies of ultrasonic wave propagation in silicon focused on effects of material anisotropy on bulk ultrasonic waves, but the dependence of the wave propagation characteristics on the material anisotropy is not well understood for Lamb waves. The phase slowness a...

Cumulative Second Harmonic Generation in Lamb Waves for the Detection of Material Nonlinearities

International Nuclear Information System (INIS)

Bermes, Christian; Jacobs, Laurence J.; Kim, Jin-Yeon; Qu, Jianmin

2007-01-01

An understanding of the generation of higher harmonics in Lamb waves is of critical importance for applications such as remaining life prediction of plate-like structural components. The objective of this work is to use nonlinear Lamb waves to experimentally investigate inherent material nonlinearities in aluminum plates. These nonlinearities, e.g. lattice anharmonicities, precipitates or vacancies, cause higher harmonics to form in propagating Lamb waves. The amplitudes of the higher harmonics increase with increasing propagation distance due to the accumulation of nonlinearity while the Lamb wave travels along its path. Special focus is laid on the second harmonic, and a relative nonlinearity parameter is defined as a function of the fundamental and second harmonic amplitude. The experimental setup uses an ultrasonic transducer and a wedge for the Lamb wave generation, and laser interferometry for detection. The experimentally measured Lamb wave signals are processed with a short-time Fourier transformation (STFT), which yields the amplitudes at different frequencies as functions of time, allowing the observation of the nonlinear behavior of the material. The increase of the relative nonlinearity parameter with propagation distance as an indicator of cumulative second harmonic generation is shown in the results for the alloy aluminum 1100-H14

Damage detection in composite materials using Lamb wave methods

Science.gov (United States)

Kessler, Seth S.; Spearing, S. Mark; Soutis, Constantinos

2002-04-01

Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents part of an experimental and analytical survey of candidate methods for in situ damage detection of composite materials. Experimental results are presented for the application of Lamb wave techniques to quasi-isotropic graphite/epoxy test specimens containing representative damage modes, including delamination, transverse ply cracks and through-holes. Linear wave scans were performed on narrow laminated specimens and sandwich beams with various cores by monitoring the transmitted waves with piezoceramic sensors. Optimal actuator and sensor configurations were devised through experimentation, and various types of driving signal were explored. These experiments provided a procedure capable of easily and accurately determining the time of flight of a Lamb wave pulse between an actuator and sensor. Lamb wave techniques provide more information about damage presence and severity than previously tested methods (frequency response techniques), and provide the possibility of determining damage location due to their local response nature. These methods may prove suitable for structural health monitoring applications since they travel long distances and can be applied with conformable piezoelectric actuators and sensors that require little power.

Lamb-Wave-Based Tomographic Imaging Techniques for Hole-Edge Corrosion Monitoring in Plate Structures

Directory of Open Access Journals (Sweden)

Dengjiang Wang

2016-11-01

Full Text Available This study presents a novel monitoring method for hole-edge corrosion damage in plate structures based on Lamb wave tomographic imaging techniques. An experimental procedure with a cross-hole layout using 16 piezoelectric transducers (PZTs was designed. The A0 mode of the Lamb wave was selected, which is sensitive to thickness-loss damage. The iterative algebraic reconstruction technique (ART method was used to locate and quantify the corrosion damage at the edge of the hole. Hydrofluoric acid with a concentration of 20% was used to corrode the specimen artificially. To estimate the effectiveness of the proposed method, the real corrosion damage was compared with the predicted corrosion damage based on the tomographic method. The results show that the Lamb-wave-based tomographic method can be used to monitor the hole-edge corrosion damage accurately.

An innovative method for automatic determination of time of arrival for Lamb waves excited by impact events

Science.gov (United States)

Zhu, Junxiao; Parvasi, Seyed Mohammad; Ho, Siu Chun Michael; Patil, Devendra; Ge, Maochen; Li, Hongnan; Song, Gangbing

2017-05-01

Lamb waves have great potential as a diagnostic tool in the application of structural health monitoring. Propagation properties of Lamb waves are affected by the state of the structure that the waves are traveling upon. Thus Lamb waves can carry information about the structure as they travel across a structure. However, the dispersive, multimodal and attenuation characteristics of Lamb waves make it difficult to determine the time of arrival of Lamb waves. To deal with these characteristics, an innovative method to automatically determine the time of arrival for impact-induced Lamb waves without human intervention is proposed in this paper. Lead zirconate titanate sensors mounted on the surface of an aluminum plate were used to measure the Lamb waves excited by an impact. The time of arrival was determined based on wavelet decomposition, Hilbert transform and statistics (Grubbs’ test and maximum likelihood estimation). Both of numerical analysis and physical measurements have verified the accuracy of this method for impacts on an aluminum plate.

Cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate

International Nuclear Information System (INIS)

Xiang Yanxun; Deng Mingxi

2008-01-01

The physical process of cumulative second-harmonic generation of Lamb waves propagating in a two-layered solid plate is presented by using the second-order perturbation and the technique of nonlinear reflection of acoustic waves at an interface. In general, the cumulative second-harmonic generation of a dispersive guided wave propagation does not occur. However, the present paper shows that the second-harmonic of Lamb wave propagation arising from the nonlinear interaction of the partial bulk acoustic waves and the restriction of the three boundaries of the solid plates does have a cumulative growth effect if some conditions are satisfied. Through boundary condition and initial condition of excitation, the analytical expression of cumulative second-harmonic of Lamb waves propagation is determined. Numerical results show the cumulative effect of Lamb waves on second-harmonic field patterns. (classical areas of phenomenology)

Using lamb waves tomonitor moisture absorption thermally fatigues composite laminates

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Sun; Cho, Youn Ho [School of Mechanical Engineering, Pusan National University, Busan (Korea, Republic of)

2016-06-15

Nondestructive evaluation for material health monitoring is important in aerospace industries. Composite laminates are exposed to heat cyclic loading and humid environment depending on flight conditions. Cyclic heat loading and moisture absorption may lead to material degradation such as matrix breaking, debonding, and delamination. In this paper, the moisture absorption ratio was investigated by measuring the Lamb wave velocity. The composite laminates were manufactured and subjected to different thermal aging cycles and moisture absorption. For various conditions of these cycles, not only changes in weight and also ultrasonic wave velocity were measured, and the Lamb wave velocity at various levels of moisture on a carbon-epoxy plate was investigated. Results from the experiment show a linear correlation between moisture absorption ratio and Lamb wave velocity at different thermal fatigue stages. The presented method can be applied as an alternative solution in the online monitoring of composite laminate moisture levels in commercial flights.

Multi reflection of Lamb wave emission in an acoustic waveguide sensor.

Science.gov (United States)

Schmitt, Martin; Olfert, Sergei; Rautenberg, Jens; Lindner, Gerhard; Henning, Bernd; Reindl, Leonhard Michael

2013-02-27

Recently, an acoustic waveguide sensor based on multiple mode conversion of surface acoustic waves at the solid-liquid interfaces has been introduced for the concentration measurement of binary and ternary mixtures, liquid level sensing, investigation of spatial inhomogenities or bubble detection. In this contribution the sound wave propagation within this acoustic waveguide sensor is visualized by Schlieren imaging for continuous and burst operation the first time. In the acoustic waveguide the antisymmetrical zero order Lamb wave mode is excited by a single phase transducer of 1 MHz on thin glass plates of 1 mm thickness. By contact to the investigated liquid Lamb waves propagating on the first plate emit pressure waves into the adjacent liquid, which excites Lamb waves on the second plate, what again causes pressure waves traveling inside the liquid back to the first plate and so on. The Schlieren images prove this multi reflection within the acoustic waveguide, which confirms former considerations and calculations based on the receiver signal. With this knowledge the sensor concepts with the acoustic waveguide sensor can be interpreted in a better manner.

Adhesive joint evaluation by ultrasonic interface and lamb waves

Science.gov (United States)

Rokhlin, S. I.

1986-01-01

Some results on the application of interface and Lamb waves for the study of curing of thin adhesive layers were summarized. In the case of thick substrates (thickness much more than the wave length) the interface waves can be used. In this case the experimental data can be inverted and the shear modulus of the adhesive film may be explicitly found based on the measured interface wave velocity. It is shown that interface waves can be used for the study of curing of structural adhesives as a function of different temperatures and other experimental conditions. The kinetics of curing was studied. In the case of thin substrates the wave phenomena are much more complicated. It is shown that for successful measurements proper selection of experimental conditions is very important. This can be done based on theoretical estimations. For correctly selected experimental conditions the Lamb waves may be a sensitive probe of adhesive bond quality and may be used or cure monitoring.

High-frequency Lamb wave device composed of MEMS structure using LiNbO3 thin film and air gap.

Science.gov (United States)

Kadota, Michio; Ogami, Takashi; Yamamoto, Kansho; Tochishita, Hikari; Negoro, Yasuhiro

2010-11-01

High-frequency devices operating at 3 GHz or higher are required, for instance, for future 4th generation mobile phone systems in Japan. Using a substrate with a high acoustic velocity is one method to realize a high-frequency acoustic or elastic device. A Lamb wave has a high velocity when the substrate thickness is thin. To realize a high-frequency device operating at 3 GHz or higher using a Lamb wave, a very thin (less than 0.5 μm thick) single-crystal plate must be used. It is difficult to fabricate such a very thin single crystal plate. The authors have attempted to use a c-axis orientated epitaxial LiNbO(3) thin film deposited by a chemical vapor deposition system (CVD) instead of using a thin LiNbO(3) single crystal plate. Lamb wave resonators composed of a interdigital transducer (IDT)/the LiNbO(3) film/air gap/base substrate structure like micro-electromechanical system (MEMS) transducers were fabricated. These resonators have shown a high frequency of 4.5 and 6.3 GHz, which correspond to very high acoustic velocities of 14,000 and 12,500 m/s, respectively, have excellent characteristics such as a ratio of resonant and antiresonant impedance of 52 and 38 dB and a wide band of 7.2% and 3.7%, respectively, and do not have spurious responses caused by the 0th modes of shear horizontal (SH(0)) and symmetric (S(0)) modes.

Legendre polynomial modeling for vibrations of guided Lamb waves modes in [001]c, [011]c and [111]c polarized (1-x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (x = 0.29 and 0.33) piezoelectric plates: Physical phenomenon of multiple intertwining of An and Sn modes

Science.gov (United States)

Othmani, Cherif; Takali, Farid; Njeh, Anouar

2017-12-01

Guided wave devices have recently become one of the most important applications in the industry because such waves are directly related to applications in sensor technology, chemical sensing, agricultural science, fields of bio-sensing and surface acoustic wave (SAW) devices that are used in electronic filters and signal processing. On that account, this numerical investigation aims to study the propagation behavior of guided Lamb waves in a (1-x)Pb(Mg1/3Nb2/3)O3- x PbTiO3 [PMN- x PT] ( x=0.29 or 0.33) piezoelectric single crystal plate. In fact, the PMN- xPT ( x=0.29 or 0.33) piezoelectric crystals are being polarized along [001]c, [011]c and [111]c of the cubic reference directions so that the macroscopic symmetries are tetragonal 4 mm, orthogonal mm2 and rhombohedral 3 m, respectively. Both open- and short-circuit conditions are considered. Here, the Legendre polynomial method is proposed to solve the guided Lamb waves equations. The validity of the proposed method is illustrated by comparison with the ordinary differential equation (ODE). The convergence of this method is discussed. Consequently, the converged results are obtained with very low truncation order M . This constitutes a major advantage of the present method when compared with the other matrix methods. There is cross-crossings among multiple modes for both symmetric ( Sn) and the anti-symmetric ( An) guided Lamb waves propagation. A displacement field has been illustrated to judge whether Sn and An modes cross with each other. Moreover, electric displacement, stress field and electric potential for the open-circuit case were presented for both S0 and A0 Lamb modes.

The effect of actuator bending on Lamb wave displacement fields generated by a piezoelectric patch

International Nuclear Information System (INIS)

Huang, H; Pamphile, T; Derriso, M

2008-01-01

A Lamb wave is a special type of elastic wave that is widely employed in structural health monitoring systems for damage detection. Recently, piezoelectric (piezo) patches have become popular for Lamb wave excitation and sensing because one piezo patch can serve as both the actuator and the sensor. All published work has assumed that the Lamb wave displacement field generated by a piezo patch actuator is axi-symmetric. However, we observed that piezo sensors placed at equal distances from the piezo patch actuator displayed different responses. In order to understand this phenomenon, we used a laser vibrometer to measure the full-field displacements around a circular piezo actuator noncontactly. The displacement fields excited by the piezo patch actuator are found to be directional, and this directionality is also frequency dependent, indicating that the out-of-plane bending dynamics of the piezo actuator may play an important role in the Lamb wave displacement fields. A simulation model that incorporates the bending deformation of the piezo patch into the calculations of the Lamb wave generation is then developed. The agreement between the simulated and measured displacement fields confirmed that the directionality of the Lamb wave displacement fields is governed by the bending deformation of the piezo patch actuator

Time-domain analysis of second-harmonic generation of primary Lamb wave propagation in an elastic plate

International Nuclear Information System (INIS)

Deng Ming-Xi; Xiang Yan-Xun

2010-01-01

Within the second-order perturbation approximation, this paper investigates the physical process of generation of the time-domain second harmonic by a primary Lamb wave waveform in an elastic plate. The present work is performed based on the preconditions that the phase velocity matching is satisfied and that the transfer of energy from the primary Lamb wave to the double frequency Lamb wave is not zero. It investigates the influences of the difference between the group velocities of the primary Lamb wave and the double frequency Lamb wave, the propagation distance and the duration of the primary Lamb wave waveform on the envelope shape of the time-domain second harmonic. It finds that the maximum magnitude of the envelope of the second-harmonic waveform can grow within some propagation distance even if the condition of group velocity matching is not satisfied. Our analyses also indicate that the maximum magnitude of the envelope of the second-harmonic waveform is kept constant beyond a specific propagation distance. Furthermore, it concludes that the integration amplitude of the time-domain second-harmonic waveform always grows with propagation distance within the second-order perturbation. The present research yields new physical insight not previously available into the effect of generation of the time-domain second harmonic by propagation of a primary Lamb wave waveform

Lamb wave scattering by a surface-breaking crack in a plate

Science.gov (United States)

Datta, S. K.; Al-Nassar, Y.; Shah, A. H.

1991-01-01

An NDE method based on finite-element representation and modal expansion has been developed for solving the scattering of Lamb waves in an elastic plate waveguide. This method is very powerful for handling discontinuities of arbitrary shape, weldments of different orientations, canted cracks, etc. The advantage of the method is that it can be used to study the scattering of Lamb waves in anisotropic elastic plates and in multilayered plates as well.

Real-Time Characterization of Materials Degradation Using Leaky Lamb Wave

Science.gov (United States)

Shiuh, S.; Bar-Cohen, Y.

1997-01-01

Leaky Lamb wave (LLW) propagation in composite materials has been studied extensively since it was first observed in 1982. The wave is induced using a pitch-catch arrangement and the plate wave modes are detected by searching minima in the reflected spectra.

Interface-guided mode of Lamb waves in a two-dimensional phononic crystal plate

International Nuclear Information System (INIS)

Huang Ping-Ping; Yao Yuan-Wei; Zhang Xin; Li Jing; Hu Ai-Zhen; Wu Fu-Gen

2015-01-01

We investigate the interface-guided mode of Lamb waves in a phononic crystal heterostructures plate, which is composed of two different semi-infinite phononic crystal (PC) plates. The interface-guided modes of the Lamb wave can be obtained by the lateral lattice slipping or by the interface longitudinal gliding. Significantly, it is observed that the condition to generate the interface-guided modes of the Lamb wave is more demanding than that of the studied fluid–fluid system. The interface-guided modes are strongly affected not only by the relative movement of the two semi-infinite PCs but also by the thickness of the PC plate. (paper)

Application of Lamb waves for the characterization of composite plates

International Nuclear Information System (INIS)

Agostini, Valentina; Delsanto, Pier P.; Olivero, Dimitri; Baboux, Jean-C.; Monnier, Thomas

1999-01-01

In order to detect and evaluate flaws in thin composite structures, such as skins on aircraft wings or sail boat bodies, Lamb waves are the preferred tool of ultrasonic excitation. In the framework of a European Brite EuRam project, we have been involved in the problem of damage assessment in smart composite plates. Our goal is to predict the system signature and to identify optimal signal extraction routines. Given the wave frequency, thickness and physical properties of the materials, we simulate, using the Local Interaction Simulation Approach (LISA), the propagation of Lamb waves in carbon fiber reinforced plates and their interaction with defects and compare the numerical results with the experimental data

Fatigue disbonding analysis of wide composite panels by means of Lamb waves

Science.gov (United States)

Michalcová, Lenka; Rechcígel, Lukáš; Bělský, Petr; Kucharský, Pavel

2018-03-01

Guided wave-based monitoring of composite structures plays an important role in the area of structural health monitoring (SHM) of aerospace structures. Adhesively bonded joints have not yet fulfilled current airworthiness requirements; hence, assemblies of carbon fibre-reinforced parts still require mechanical fasteners, and a verified SHM method with reliable disbonding/delamination detection and propagation assessment is needed. This study investigated the disbonding/delamination propagation in adhesively bonded panels using Lamb waves during fatigue tests. Analyses focused on the proper frequency and mode selection, sensor placement and selection of parameter sensitive to the growth of disbonding areas. Piezoelectric transducers placed across the bonded area were used as actuators and sensors. Lamb wave propagation was investigated considering the actual shape of the crack front and the mode of the crack propagation. The actual cracked area was determined by ultrasonic A-scans. A correlation between the crack propagation rate and the A0 mode velocity was found.

A time reversal damage imaging method for structure health monitoring using Lamb waves

International Nuclear Information System (INIS)

Zhang Hai-Yan; Cao Ya-Ping; Sun Xiu-Li; Chen Xian-Hua; Yu Jian-Bo

2010-01-01

This paper investigates the Lamb wave imaging method combining time reversal for health monitoring of a metallic plate structure. The temporal focusing effect of the time reversal Lamb waves is investigated theoretically. It demonstrates that the focusing effect is related to the frequency dependency of the time reversal operation. Numerical simulations are conducted to study the time reversal behaviour of Lamb wave modes under broadband and narrowband excitations. The results show that the reconstructed time reversed wave exhibits close similarity to the reversed narrowband tone burst signal validating the theoretical model. To enhance the similarity, the cycle number of the excited signal should be increased. Experiments combining finite element model are then conducted to study the imaging method in the presence of damage like hole in the plate structure. In this work, the time reversal technique is used for the recompression of Lamb wave signals. Damage imaging results with time reversal using broadband and narrowband excitations are compared to those without time reversal. It suggests that the narrowband excitation combined time reversal can locate and determine the size of structural damage more precisely, but the cycle number of the excited signal should be chosen reasonably

Study on crack scattering in aluminum plates with Lamb wave frequency–wavenumber analysis

International Nuclear Information System (INIS)

Yu, Lingyu; Tian, Zhenhua; Leckey, Cara A C

2013-01-01

The multimodal characteristic of Lamb waves makes the interpretation of Lamb wave signals difficult in either the time or frequency domain. In this work, we present our study of Lamb wave propagation characterization and crack scattering using frequency–wavenumber analysis. The aim is to investigate three dimensional (3D) Lamb wave behavior in the presence of crack damage via the application of frequency–wavenumber analysis. The analysis techniques are demonstrated using simulation examples of an aluminum plate with a through-thickness crack. Both in-plane and out-of-plane components are acquired through a 3D elastodynamic finite integration technique (EFIT), while the out-of-plane component is also experimentally obtained using a scanning laser Doppler vibrometer for verification purposes. The time–space wavefield is then transformed to the frequency–wavenumber domain by a two dimensional (2D) Fourier transform and the out-of-plane EFIT results are compared to experimental measurements. The experimental and simulated results are found to be in close agreement. The frequency–wavenumber representation of in-plane and out-of-plane components shows clear distinction among various Lamb wave modes that are present. However, spatial information is lost during this 2D transformation. A short space 2D Fourier transform is therefore adopted to obtain the frequency–wavenumber spectra at various spatial locations, resulting in a space–frequency–wavenumber representation of the signal. The space–frequency–wavenumber analysis has shown its potential for indicating crack presence. (paper)

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals

Energy Technology Data Exchange (ETDEWEB)

Zhang, Y., E-mail: thuzhangyu@foxmail.com; Huang, S. L., E-mail: huangsling@tsinghua.edu.cn; Wang, S.; Zhao, W. [State Key Laboratory of Power Systems, Department of Electrical Engineering, Tsinghua University, Beijing 100084 (China)

2016-05-15

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency for all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert–Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of <1% and thus can act as a universal time-of-flight extraction method for narrowband Lamb wave detection signals.

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals

International Nuclear Information System (INIS)

Zhang, Y.; Huang, S. L.; Wang, S.; Zhao, W.

2016-01-01

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency for all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert–Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of <1% and thus can act as a universal time-of-flight extraction method for narrowband Lamb wave detection signals.

Simulation of Asymmetric Lamb Waves for Sensing and Actuation in Plates

Directory of Open Access Journals (Sweden)

A. Ghoshal

2005-01-01

Full Text Available Two approaches used for monitoring the health of thin aerospace structures are active interrogation and passive monitoring. The active interrogation approach generates and receives diagnostic Lamb waves to detect damage, while the passive monitoring technique listens for acoustic waves caused by damage growth. For the application of both methods, it is necessary to understand how Lamb waves propagate through a structure. In this paper, a Physics-Based Model (PBM using classical plate theory is developed to provide a basic understanding of the actual physical process of asymmetric Lamb mode wave generation and propagation in a plate. The closed-form model uses modal superposition to simulate waves generated by piezoceramic patches and by simulated acoustic emissions. The generation, propagation, reflection, interference, and the sensing of the waves are represented in the model, but damage is not explicitly modeled. The developed model is expected to be a useful tool for the Structural Health Monitoring (SHM community, particularly for studying high frequency acoustic wave generation and propagation in lieu of Finite Element models and other numerical models that require significant computational resources. The PBM is capable of simulating many possible scenarios including a variety of test cases, whereas experimental measurements of all of the cases can be costly and time consuming. The model also incorporates the sensor measurement effect, which is an important aspect in damage detection. Continuous and array sensors are modeled, which are efficient for measuring waves because of their distributed nature.

Detection of leak-defective fuel rods using the circumferential Lamb waves excited by the resonance backscattering of ultrasonic pulses

International Nuclear Information System (INIS)

Choi, M.S.; Yang, M.S.; Kim, H.C.

1992-01-01

A new ultrasonic technique for detecting the infiltrated water in leaked fuel rods is developed. Propagation characteristics of the circumferential Lamb waves in the cladding tubes are estimated by the resonance scattering theory. The Lamb waves are excited by the resonance backscattering of ultrasonic pulses. In sound fuel rods, the existence of the Lamb waves is revealed by a series of periodic echoes. In leaked fuel rods, however, the Lamb waves are perturbed strongly by the scattered waves from the surface of fuel pellets, thus the periodic echoes are not observed. (author)

Damage Detection Using Lamb Waves for Structural Health Monitoring

National Research Council Canada - National Science Library

Crider II, Jeffrey S

2007-01-01

.... This study evaluates Lamb wave approaches used to detect simulated cracks in laboratory experiments on thin plates to detect more realistic damage in a test article representing the complex geometry...

Time-frequency energy density precipitation method for time-of-flight extraction of narrowband Lamb wave detection signals.

Science.gov (United States)

Zhang, Y; Huang, S L; Wang, S; Zhao, W

2016-05-01

The time-of-flight of the Lamb wave provides an important basis for defect evaluation in metal plates and is the input signal for Lamb wave tomographic imaging. However, the time-of-flight can be difficult to acquire because of the Lamb wave dispersion characteristics. This work proposes a time-frequency energy density precipitation method to accurately extract the time-of-flight of narrowband Lamb wave detection signals in metal plates. In the proposed method, a discrete short-time Fourier transform is performed on the narrowband Lamb wave detection signals to obtain the corresponding discrete time-frequency energy density distribution. The energy density values at the center frequency for all discrete time points are then calculated by linear interpolation. Next, the time-domain energy density curve focused on that center frequency is precipitated by least squares fitting of the calculated energy density values. Finally, the peak times of the energy density curve obtained relative to the initial pulse signal are extracted as the time-of-flight for the narrowband Lamb wave detection signals. An experimental platform is established for time-of-flight extraction of narrowband Lamb wave detection signals, and sensitivity analysis of the proposed time-frequency energy density precipitation method is performed in terms of propagation distance, dispersion characteristics, center frequency, and plate thickness. For comparison, the widely used Hilbert-Huang transform method is also implemented for time-of-flight extraction. The results show that the time-frequency energy density precipitation method can accurately extract the time-of-flight with relative error of wave detection signals.

Influences of interfacial properties on second-harmonic generation of Lamb waves propagating in layered planar structures

International Nuclear Information System (INIS)

Deng Mingxi; Wang Ping; Lv Xiafu

2006-01-01

This paper describes influences of interfacial properties on second-harmonic generation of Lamb waves propagating in layered planar structures. The nonlinearity in the elastic wave propagation is treated as a second-order perturbation of the linear elastic response. Due to the kinematic nonlinearity and the elastic nonlinearity of materials, there are second-order bulk and surface/interface driving sources in layered planar structures through which Lamb waves propagate. These driving sources can be thought of as forcing functions of a series of double frequency lamb waves (DFLWs) in terms of the approach of modal expansion analysis for waveguide excitation. The total second-harmonic fields consist of a summation of DFLWs in the corresponding stress-free layered planar structures. The interfacial properties of layered planar structures can be described by the well-known finite interfacial stiffness technique. The normal and tangential interfacial stiffness constants can be coupled with the equation governing the expansion coefficient of each DFLW component. On the other hand, the normal and tangential interfacial stiffness constants are associated with the degree of dispersion between Lamb waves and DFLWs. Theoretical analyses and numerical simulations indicate that the efficiency of second-harmonic generation by Lamb wave propagation is closely dependent on the interfacial properties of layered structures. The potential of using the effect of second-harmonic generation by Lamb wave propagation to characterize the interfacial properties of layered structures are considered. Some experimental results are presented

Influence of crack opening and incident wave angle on second harmonic generation of Lamb waves

Science.gov (United States)

Yang, Yi; Ng, Ching-Tai; Kotousov, Andrei

2018-05-01

Techniques utilising second harmonic generation (SHG) have proven their great potential in detecting contact-type damage. However, the gap between the practical applications and laboratory studies is still quite large. The current work is aimed to bridge this gap by investigating the effects of the applied load and incident wave angle on the detectability of fatigue cracks at various lengths. Both effects are critical for practical implementations of these techniques. The present experimental study supported by three-dimensional (3D) finite element (FE) modelling has demonstrated that the applied load, which changes the crack opening and, subsequently, the contact nonlinearity, significantly affects the amplitude of the second harmonic generated by the fundamental symmetric mode (S0) of Lamb wave. This amplitude is also dependent on the length of the fatigue crack as well as the incident wave angle. The experimental and FE results correlate well, so the modelling approach can be implemented for practical design of damage monitoring systems as well as for the evaluation of the severity of the fatigue cracks.

Detection and sizing of large-scale cracks in centrifugally cast stainless steel pipes using Lamb waves

International Nuclear Information System (INIS)

Ngoc, T.D.K.; Avioli, M.J. Jr.

1988-01-01

Application of conventional ultrasonic nondestructive evaluation (NDE) techniques to centrifugally cast stainless steel (CCSS) pipes in pressurized water reactors (PWRs) has been limited, mainly due to the anisotropy of the CCSS materials. Phenomena such as beam skewing and distortion are directly attributable to this anisotropy and cause severe difficulties in crack detection and sizing. To improve CCSS inspectability, the feasibility of using Lamb waves as the probing mechanism for detecting and characterizing a surface-breaking crack originating from the pipe interior surface is discussed. A similar research effort has been reported by Rokhlin who investigated the interaction of Lamb waves with delaminations in thin sheets. Rokhlin and Adler also reported recently on the use of Lamb waves for evaluating spot welds. The motivation for using this probing mechanism derives from the recognition that the difficulties introduced by beam skewing, beam distortion, and high attenuation are circumvented, since Lamb waves are not bulk waves, but are resonant vibrational modes of a solid plate

Finite nuclear size and Lamb shift of p-wave atomic states

International Nuclear Information System (INIS)

Milstein, A.I.; Sushkov, O.P.; Terekhov, I.S.

2003-01-01

We consider corrections to the Lamb shift of the p-wave atomic states due to the finite nuclear size (FNS). In other words, these are radiative corrections to the atomic isotope shift related to the FNS. It is shown that the structure of the corrections is qualitatively different to that for the s-wave states. The perturbation theory expansion for the relative correction for a p 1/2 state starts with a α ln(1/Zα) term, while for the s 1/2 states it starts with a Zα 2 term. Here, α is the fine-structure constant and Z is the nuclear charge. In the present work, we calculate the α terms for that 2p states, the result for the 2p 1/2 state reads (8α/9π){ln[1/(Zα) 2 ]+0.710}. Even more interesting are the p 3/2 states. In this case the 'correction' is several orders of magnitude larger than the 'leading' FNS shift. However, absolute values of energy shifts related to these corrections are very small

Three-dimensional temperature effect modelling of piezoceramic transducers used for Lamb wave based damage detection

International Nuclear Information System (INIS)

Kijanka, Piotr; Packo, Pawel; Staszewski, Wieslaw J; Zhu, Xuan; Di Scalea, Francesco Lanza

2015-01-01

The paper presents a three-dimensional temperature-dependent model of surface-bonded, low-profile piezoceramic transducers (PZT) used for Lamb wave propagation. The effect of temperature on Lamb wave actuation, propagation and sensing is investigated. The major focus is on the study of actuation and sensing properties of PZT for various temperature levels. These properties are investigated through the electric field analysis of transducers. The temperature effect on transducer bond layers is also investigated. Numerically simulated amplitude responses are analysed for various temperatures and excitation frequencies. Numerical simulations are validated experimentally. The results demonstrate that temperature-dependent physical properties of PZT, bond layers and particularly host structures significantly affect the amplitude and phase of Lamb wave responses. (paper)

Effects of Rubber Loading on the Ultrasonic Backward Radiation Profile of Leaky Lamb Wave

International Nuclear Information System (INIS)

Song, Sung Jin; Jung, Min Ho; Kim, Young H.; Kwon, Sung Duk

2002-01-01

The characterization of adhesive property in multi-layer materials has been hot issue for a long time. In order to evaluate adhesive properties, we constructed fully automated system for the backward radiation of leaky Lamb wave. The backward radiation profiles were obtained for the bare steel plate and plates with rubber-loading. The rf waveforms and frequency spectra of backward radiation show the characteristics of involved leaky Lamb wave modes. As the thickness of rubber-loading increased, the amplitude of profile at the incident angle of 13.4' exponentially decreased. Scanning the incident position over the partially rubber-loaded specimen shows good agreement with the actual rubber-loading. The backward radiation of leaky Lamb wave has great potential to evaluate the adhesive condition as well as material properties of plates

Pulse energy evolution for high-resolution Lamb wave inspection

International Nuclear Information System (INIS)

Hua, Jiadong; Zeng, Liang; Gao, Fei; Lin, Jing

2015-01-01

Generally, tone burst excitation methods are used to reduce the effect of dispersion in Lamb wave inspection. In addition, algorithms for dispersion compensation are required to simplify responses, especially in long-range inspection. However, the resolution is always limited by the time duration of tone burst excitation. A pulse energy evolution method is established to overcome this limitation. In this method, a broadband signal with a long time (e.g. a chirp, white noise signal, or a pseudo-random sequence) is used as excitation to actuate Lamb waves. First of all, pulse compression is employed to estimate system impulse response with a high signal-to-noise ratio. Then, dispersion compensation is applied repeatedly with systemically varied compensation distances, obtaining a series of compensated signals. In these signals, amplitude (or energy) evolution associated with the change of compensation distance is utilized to estimate the actual propagation distance of the interested wave packet. Finally, the defect position is detected by an imaging algorithm. Several experiments are given to validate the proposed method. (paper)

Improving the resolution for Lamb wave testing via a smoothed Capon algorithm

Science.gov (United States)

Cao, Xuwei; Zeng, Liang; Lin, Jing; Hua, Jiadong

2018-04-01

Lamb wave testing is promising for damage detection and evaluation in large-area structures. The dispersion of Lamb waves is often unavoidable, restricting testing resolution and making the signal hard to interpret. A smoothed Capon algorithm is proposed in this paper to estimate the accurate path length of each wave packet. In the algorithm, frequency domain whitening is firstly used to obtain the transfer function in the bandwidth of the excitation pulse. Subsequently, wavenumber domain smoothing is employed to reduce the correlation between wave packets. Finally, the path lengths are determined by distance domain searching based on the Capon algorithm. Simulations are applied to optimize the number of smoothing times. Experiments are performed on an aluminum plate consisting of two simulated defects. The results demonstrate that spatial resolution is improved significantly by the proposed algorithm.

Identification of damage in composite structures using Gaussian mixture model-processed Lamb waves

Science.gov (United States)

Wang, Qiang; Ma, Shuxian; Yue, Dong

2018-04-01

Composite materials have comprehensively better properties than traditional materials, and therefore have been more and more widely used, especially because of its higher strength-weight ratio. However, the damage of composite structures is usually varied and complicated. In order to ensure the security of these structures, it is necessary to monitor and distinguish the structural damage in a timely manner. Lamb wave-based structural health monitoring (SHM) has been proved to be effective in online structural damage detection and evaluation; furthermore, the characteristic parameters of the multi-mode Lamb wave varies in response to different types of damage in the composite material. This paper studies the damage identification approach for composite structures using the Lamb wave and the Gaussian mixture model (GMM). The algorithm and principle of the GMM, and the parameter estimation, is introduced. Multi-statistical characteristic parameters of the excited Lamb waves are extracted, and the parameter space with reduced dimensions is adopted by principal component analysis (PCA). The damage identification system using the GMM is then established through training. Experiments on a glass fiber-reinforced epoxy composite laminate plate are conducted to verify the feasibility of the proposed approach in terms of damage classification. The experimental results show that different types of damage can be identified according to the value of the likelihood function of the GMM.

Lamb wave propagation modelling and simulation using parallel processing architecture and graphical cards

International Nuclear Information System (INIS)

Paćko, P; Bielak, T; Staszewski, W J; Uhl, T; Spencer, A B; Worden, K

2012-01-01

This paper demonstrates new parallel computation technology and an implementation for Lamb wave propagation modelling in complex structures. A graphical processing unit (GPU) and computer unified device architecture (CUDA), available in low-cost graphical cards in standard PCs, are used for Lamb wave propagation numerical simulations. The local interaction simulation approach (LISA) wave propagation algorithm has been implemented as an example. Other algorithms suitable for parallel discretization can also be used in practice. The method is illustrated using examples related to damage detection. The results demonstrate good accuracy and effective computational performance of very large models. The wave propagation modelling presented in the paper can be used in many practical applications of science and engineering. (paper)

Unusual energy properties of leaky backward Lamb waves in a submerged plate.

Science.gov (United States)

Nedospasov, I A; Mozhaev, V G; Kuznetsova, I E

2017-05-01

It is found that leaky backward Lamb waves, i.e. waves with negative energy-flux velocity, propagating in a plate submerged in a liquid possess extraordinary energy properties distinguishing them from any other type of waves in isotropic media. Namely, the total time-averaged energy flux along the waveguide axis is equal to zero for these waves due to opposite directions of the longitudinal energy fluxes in the adjacent media. This property gives rise to the fundamental question of how to define and calculate correctly the energy velocity in such an unusual case. The procedure of calculation based on incomplete integration of the energy flux density over the plate thickness alone is applied. The derivative of the angular frequency with respect to the wave vector, usually referred to as the group velocity, happens to be close to the energy velocity defined by this mean in that part of the frequency range where the backward mode exists in the free plate. The existence region of the backward mode is formally increased for the submerged plate in comparison to the free plate as a result of the liquid-induced hybridization of propagating and nonpropagating (evanescent) Lamb modes. It is shown that the Rayleigh's principle (i.e. equipartition of total time-averaged kinetic and potential energies for time-harmonic acoustic fields) is violated due to the leakage of Lamb waves, in spite of considering nondissipative media. Copyright © 2017 Elsevier B.V. All rights reserved.

Reflection of Lamb waves obliquely incident on the free edge of a plate.

Science.gov (United States)

Santhanam, Sridhar; Demirli, Ramazan

2013-01-01

The reflection of obliquely incident symmetric and anti-symmetric Lamb wave modes at the edge of a plate is studied. Both in-plane and Shear-Horizontal (SH) reflected wave modes are spawned by an obliquely incident in-plane Lamb wave mode. Energy reflection coefficients are calculated for the reflected wave modes as a function of frequency and angle of incidence. This is done by using the method of orthogonal mode decomposition and by enforcing traction free conditions at the plate edge using the method of collocation. A PZT sensor network, affixed to an Aluminum plate, is used to experimentally verify the predictions of the analysis. Experimental results provide support for the analytically determined results. Copyright © 2012 Elsevier B.V. All rights reserved.

Selective Excitation of Lamb-Waves for Damage Detection in Composites

Science.gov (United States)

Petculescu, G.; Krishnaswamy, S.; Achenbach, J. D.

2006-03-01

Sensors based on periodic arrays of coherent piezoelectric sources (comb design) are used to selectively excite and detect Lamb waves in aluminum and AS4/3601 unidirectional carbon-epoxy plates. 110 μm PVDF film poled in the thickness direction is used as piezoelectric material. An algorithm to eliminate the effect of coupling in amplitude measurements, using individual Lamb modes excited/detected by the same transducer pair, is described. A multiple-impact test showing a decrease in amplitude and group velocity as damage progresses is used as an example.

Lamb wave extraction of dispersion curves in micro/nano-plates using couple stress theories

Science.gov (United States)

Ghodrati, Behnam; Yaghootian, Amin; Ghanbar Zadeh, Afshin; Mohammad-Sedighi, Hamid

2018-01-01

In this paper, Lamb wave propagation in a homogeneous and isotropic non-classical micro/nano-plates is investigated. To consider the effect of material microstructure on the wave propagation, three size-dependent models namely indeterminate-, modified- and consistent couple stress theories are used to extract the dispersion equations. In the mentioned theories, a parameter called 'characteristic length' is used to consider the size of material microstructure in the governing equations. To generalize the parametric studies and examine the effect of thickness, propagation wavelength, and characteristic length on the behavior of miniature plate structures, the governing equations are nondimensionalized by defining appropriate dimensionless parameters. Then the dispersion curves for phase and group velocities are plotted in terms of a wide frequency-thickness range to study the lamb waves propagation considering microstructure effects in very high frequencies. According to the illustrated results, it was observed that the couple stress theories in the Cosserat type material predict more rigidity than the classical theory; so that in a plate with constant thickness, by increasing the thickness to characteristic length ratio, the results approach to the classical theory, and by reducing this ratio, wave propagation speed in the plate is significantly increased. In addition, it is demonstrated that for high-frequency Lamb waves, it converges to dispersive Rayleigh wave velocity.

Fast Lamb wave energy shift approach using fully contactless ultrasonic system to characterize concrete structures

Science.gov (United States)

Ham, Suyun; Popovics, John S.

2015-03-01

Ultrasonic techniques provide an effective non-destructive evaluation (NDE) method to monitor concrete structures, but the need to perform rapid and accurate structural assessment requires evaluation of hundreds, or even thousands, of measurement datasets. Use of a fully contactless ultrasonic system can save time and labor through rapid implementation, and can enable automated and controlled data acquisition, for example through robotic scanning. Here we present results using a fully contactless ultrasonic system. This paper describes our efforts to develop a contactless ultrasonic guided wave NDE approach to detect and characterize delamination defects in concrete structures. The developed contactless sensors, controlled scanning system, and employed Multi-channel Analysis of Surface Waves (MASW) signal processing scheme are reviewed. Then a guided wave interpretation approach for MASW data is described. The presence of delamination is interpreted by guided plate wave (Lamb wave) behavior, where a shift in excited Lamb mode phase velocity, is monitored. Numerically simulated and experimental ultrasonic data collected from a concrete sample with simulated delamination defects are presented, where the occurrence of delamination is shown to be associated with a mode shift in Lamb wave energy.

Characterization of imperfect bonding qualities of layered substrate using generalized leaky lamb waves

International Nuclear Information System (INIS)

Kwon, Sung Suk; Kim, Hak Joon; Song, Sung Jin

2006-01-01

Generalized Lamb waves that exist on layered substrates have been adopted as a tool for the bonding quality evaluation. A dispersion simulation by introducing an effective interface layer shows that all the dispersion curves for imperfect interfaces are in a form of concave curves and vary with the stiffness constants that can quantitatively represent the bonding quality. The characteristics of dispersion curves of TiN coating specimens with different wear conditions was experimentally determined by use of an ultrasonic backward radiation measurement technique. Results showed that the lowest velocity mode (Rayleigh-like) of the generalized Lamb waves are sensitively affected by the bonding quality and could be applied in the quantitative evaluation of imperfect bonding quality.

Interactive Simulation and Visualization of Lamb Wave Propagation in Isotropic and Anisotropic Structures

International Nuclear Information System (INIS)

Moll, J; Schulte, R T; Fritzen, C-P; Rezk-Salama, C; Klinkert, T; Kolb, A

2011-01-01

Structural health monitoring systems allow a continuous surveillance of the structural integrity of operational systems. As a result, it is possible to reduce time and costs for maintenance without decreasing the level of safety. In this paper, an integrated simulation and visualization environment is presented that enables a detailed study of Lamb wave propagation in isotropic and anisotropic materials. Thus, valuable information about the nature of Lamb wave propagation and its interaction with structural defects become available. The well-known spectral finite element method is implemented to enable a time-efficient calculation of the wave propagation problem. The results are displayed in an interactive visualization framework accounting for the human perception that is much more sensitive to motion than to changes in color. In addition, measurements have been conducted experimentally to record the full out-of-plane wave-field using a Laser-Doppler vibrometry setup. An aluminum structure with two synthetic cuts has been investigated, where the elongated defects have a different orientation with respect to the piezoelectric actuator. The resulting wave-field is also displayed interactively showing that the scattered wave-field at the defect is highly directional.

Damage detection in composite panels based on mode-converted Lamb waves sensed using 3D laser scanning vibrometer

Science.gov (United States)

Pieczonka, Łukasz; Ambroziński, Łukasz; Staszewski, Wiesław J.; Barnoncel, David; Pérès, Patrick

2017-12-01

This paper introduces damage identification approach based on guided ultrasonic waves and 3D laser Doppler vibrometry. The method is based on the fact that the symmetric and antisymmetric Lamb wave modes differ in amplitude of the in-plane and out-of-plane vibrations. Moreover, the modes differ also in group velocities and normally they are well separated in time. For a given time window both modes can occur simultaneously only close to the wave source or to a defect that leads to mode conversion. By making the comparison between the in-plane and out-of-plane wave vector components the detection of mode conversion is possible, allowing for superior and reliable damage detection. Experimental verification of the proposed damage identification procedure is performed on fuel tank elements of Reusable Launch Vehicles designed for space exploration. Lamb waves are excited using low-profile, surface-bonded piezoceramic transducers and 3D scanning laser Doppler vibrometer is used to characterize the Lamb wave propagation field. The paper presents theoretical background of the proposed damage identification technique as well as experimental arrangements and results.

Bilinear Time-frequency Analysis for Lamb Wave Signal Detected by Electromagnetic Acoustic Transducer

Science.gov (United States)

Sun, Wenxiu; Liu, Guoqiang; Xia, Hui; Xia, Zhengwu

2018-03-01

Accurate acquisition of the detection signal travel time plays a very important role in cross-hole tomography. The experimental platform of aluminum plate under the perpendicular magnetic field is established and the bilinear time-frequency analysis methods, Wigner-Ville Distribution (WVD) and the pseudo-Wigner-Ville distribution (PWVD), are applied to analyse the Lamb wave signals detected by electromagnetic acoustic transducer (EMAT). By extracting the same frequency component of the time-frequency spectrum as the excitation frequency, the travel time information can be obtained. In comparison with traditional linear time-frequency analysis method such as short-time Fourier transform (STFT), the bilinear time-frequency analysis method PWVD is more appropriate in extracting travel time and recognizing patterns of Lamb wave.

Impact induced damage assessment by means of Lamb wave image processing

Science.gov (United States)

Kudela, Pawel; Radzienski, Maciej; Ostachowicz, Wieslaw

2018-03-01

The aim of this research is an analysis of full wavefield Lamb wave interaction with impact-induced damage at various impact energies in order to find out the limitation of the wavenumber adaptive image filtering method. In other words, the relation between impact energy and damage detectability will be shown. A numerical model based on the time domain spectral element method is used for modeling of Lamb wave propagation and interaction with barely visible impact damage in a carbon-epoxy laminate. Numerical studies are followed by experimental research on the same material with an impact damage induced by various energy and also a Teflon insert simulating delamination. Wavenumber adaptive image filtering and signal processing are used for damage visualization and assessment for both numerical and experimental full wavefield data. It is shown that it is possible to visualize and assess the impact damage location, size and to some extent severity by using the proposed technique.

Scattering of Lamb waves by cracks in a composite graphite fiber-reinforced epoxy plate

Science.gov (United States)

Bratton, Robert; Datta, Subhendu K.; Shah, Arvind

1990-01-01

Recent investigations of space construction techniques have explored the used of composite materials in the construction of space stations and platforms. These composites offer superior strength to weight ratio and are thermally stable. For example, a composite material being considered is laminates of graphite fibers in an epoxy matrix. The overall effective elastic constants of such a medium can be calculated from fiber and matrix properties by using an effective modulus theory as shown in Datta, el. al. The investigation of propagation and scattering of elastic waves in composite materials is necessary in order to develop an ability to characterize cracks and predict the reliability of composite structures. The objective of this investigation is the characterization of a surface breaking crack by ultrasonic techniques. In particular, the use of Lamb waves for this purpose is studied here. The Lamb waves travel through the plate, encountering a crack, and scatter. Of interest is the modeling of the scattered wave in terms of the Lamb wave modes. The direct problem of propagation and scattering of Lamb waves by a surface breaking crack has been analyzed. This would permit an experimentalist to characterize the crack by comparing the measured response to the analytical model. The plate is assumed to be infinite in the x and y directions with a constant thickness in the z direction. The top and bottom surfaces are traction free. Solving the governing wave equations and using the stress-free boundary conditions results in the dispersion equation. This equation yields the guided modes in the homogeneous plate. The theoretical model is a hybrid method that combines analytical and finite elements techniques to describe the scattered displacements. A finite region containing the defects is discretized by finite elements. Outside the local region, the far field solution is expressed as a Fourier summation of the guided modes obtained from the dispersion equation

On the lamb wave propagation in anisotropic laminated composite plates

International Nuclear Information System (INIS)

Park, Soo Keun; Jeong, Hyun Jo; Kim, Moon Saeng

1998-01-01

This paper examines the propagation of Lamb (or plate) waves in anisotropic laminated composite plates. The dispersion relations are explicitly derived using the classical plate theory (CLT), the first-order shear deformation theory (FSDT) and the exact solution (ES), Attention is paid to the lowest antisymmetric (flexural) and lowest symmetric(extensional) modes in the low frequency, long wavelength limit. Different values of shear correction factor were tested in FSDT and comparisons between flexural wave dispersion curves were made with exact results to asses the range of validity of approximate plate theories in the frequency domain.

Influence of stacking sequence on scattering characteristics of the fundamental anti-symmetric Lamb wave at through holes in composite laminates.

Science.gov (United States)

Veidt, Martin; Ng, Ching-Tai

2011-03-01

This paper investigates the scattering characteristics of the fundamental anti-symmetric (A(0)) Lamb wave at through holes in composite laminates. Three-dimensional (3D) finite element (FE) simulations and experimental measurements are used to study the physical phenomenon. Unidirectional, bidirectional, and quasi-isotropic composite laminates are considered in the study. The influence of different hole diameter to wavelength aspect ratios and different stacking sequences on wave scattering characteristics are investigated. The results show that amplitudes and directivity distribution of the scattered Lamb wave depend on these parameters. In the case of quasi-isotropic composite laminates, the scattering directivity patterns are dominated by the fiber orientation of the outer layers and are quite different for composite laminates with the same number of laminae but different stacking sequence. The study provides improved physical insight into the scattering phenomena at through holes in composite laminates, which is essential to develop, validate, and optimize guided wave damage detection and characterization techniques. © 2011 Acoustical Society of America

A Novel Complementary Method for the Point-Scan Nondestructive Tests Based on Lamb Waves

Directory of Open Access Journals (Sweden)

Rahim Gorgin

2014-01-01

Full Text Available This study presents a novel area-scan damage identification method based on Lamb waves which can be used as a complementary method for point-scan nondestructive techniques. The proposed technique is able to identify the most probable locations of damages prior to point-scan test which lead to decreasing the time and cost of inspection. The test-piece surface was partitioned with some smaller areas and the damage probability presence of each area was evaluated. A0 mode of Lamb wave was generated and collected using a mobile handmade transducer set at each area. Subsequently, a damage presence probability index (DPPI based on the energy of captured responses was defined for each area. The area with the highest DPPI value highlights the most probable locations of damages in test-piece. Point-scan nondestructive methods can then be used once these areas are found to identify the damage in detail. The approach was validated by predicting the most probable locations of representative damages including through-thickness hole and crack in aluminum plates. The obtained experimental results demonstrated the high potential of developed method in defining the most probable locations of damages in structures.

Application of Synthetic Aperture Focusing Technique for inspection of plate-like structures using EMAT generated Lamb waves

Directory of Open Access Journals (Sweden)

Mirchev Yordan

2018-01-01

Full Text Available The main challenge for guided wave inspection is exact defect characterization and sizing. EMAT generated Lamb waves usually have low signal-to-noise ratio which reduces the defect detection, characterization and sizing capabilities. That's why in most cases the method is used only as a screening tool. The Synthetic Aperture Focusing Technique is a process that increases the signal-to-noise ratio by numerically focusing the acoustic fields. In this paper the application of SAFT is tested over EMAT generated Lamb waves. The improvement of lateral resolution and signal-to-noise ratio is evaluated. Results are presented as a comparison between standard B-scan and SAFT processed data.

Damage detection using piezoelectric transducers and the Lamb wave approach: II. Robust and quantitative decision making

International Nuclear Information System (INIS)

Lu, Y; Wang, X; Tang, J; Ding, Y

2008-01-01

The propagation of Lamb waves generated by piezoelectric transducers in a one-dimensional structure has been studied comprehensively in part I of this two-paper series. Using the information embedded in the propagating waveforms, we expect to make a decision on whether damage has occurred; however, environmental and operational variances inevitably complicate the problem. To better detect the damage under these variances, we present in this paper a robust and quantitative decision-making methodology involving advanced signal processing and statistical analysis. In order to statistically evaluate the features in Lamb wave propagation in the presence of noise, we collect multiple time series (baseline signals) from the undamaged beam. A combination of the improved adaptive harmonic wavelet transform (AHWT) and the principal component analysis (PCA) is performed on the baseline signals to highlight the critical features of Lamb wave propagation in the undamaged structure. The detection of damage is facilitated by comparing the features of the test signal collected from the test structure (damaged or undamaged) with the features of the baseline signals. In this process, we employ Hotelling's T 2 statistical analysis to first purify the baseline dataset and then to quantify the deviation of the test data vector from the baseline dataset. Through experimental and numerical studies, we systematically investigate the proposed methodology in terms of the detectability (capability of detecting damage), the sensitivity (with respect to damage severity and excitation frequency) and the robustness against noises. The parametric studies also validate, from the signal processing standpoint, the guidelines of Lamb-wave-based damage detection developed in part I

Experimental assessment of the influence of welding process parameters on Lamb wave transmission across ultrasonically welded thermoplastic composite joints

Science.gov (United States)

Ochôa, Pedro; Fernandez Villegas, Irene; Groves, Roger M.; Benedictus, Rinze

2018-01-01

One of the advantages of thermoplastic composites relative to their thermoset counterparts is the possibility of assembling components through welding. Ultrasonic welding in particular is very promising for industrialization. However, uncertainty in the fatigue and fracture behaviour of composites is still an obstacle to the full utilisation of these materials. Health monitoring is then of vital importance, and Lamb wave techniques have been widely recognised as some of the most promising approaches for that end. This paper presents the first experimental study about the influence of welding travel on the transmission of Lamb waves across ultrasonically welded thermoplastic composite joints in single-lap configuration. The main aim of this research is to start to understand how guided waves interact with the internal structure of ultrasonic welds, so that benign, manufacturing-related structural features can be distinguished from damaging ones in signal interpretation. The power transmission coefficient and the correlation coefficient proved to be suitable for analysing the wave propagation phenomena, allowing quantitative identification of small variations of weld-line thickness and intermolecular diffusion at the weld interface. The conclusions are used to develop a tentative damage detection criterion which can later on assist the design of a Lamb wave based structural health monitoring system for thermoplastic composite structures. The Lamb wave test results are backed up by phased-array inspections, which also provide some extra insight on the internal structure of ultrasonic welds.

Spiral-shaped piezoelectric sensors for Lamb waves direction of arrival (DoA) estimation

Science.gov (United States)

De Marchi, L.; Testoni, N.; Marzani, A.

2018-04-01

A novel strategy to design piezoelectric sensors suited for direction of arrival (DoA) estimation of incoming Lamb waves is presented in this work. The designed sensor is composed by two piezoelectric patches (P1, P2) bonded on the structure to be inspected. In particular, by exploiting the Radon transform, the proposed procedure computes the shape of P2 given the shape of P1 so that the difference in time of arrival (DToA) of the Lamb waves at the two patches is linearly related to the DoA while being agnostic of the waveguide dispersion curves. With a dedicated processing procedure, the waveforms acquired from the two electrodes and digitized can be used to retrieve the DoA information. Numerical and experimental results show that DoA estimation performed by means of the proposed shaped transducers is extremely robust.

Lamb wave band gaps in one-dimensional radial phononic crystal plates with periodic double-sided corrugations

Energy Technology Data Exchange (ETDEWEB)

Li, Yinggang [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); School of Transportation, Wuhan University of Technology, Wuhan 430070 (China); Chen, Tianning [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); Wang, Xiaopeng, E-mail: xpwang@mail.xjtu.edu.cn [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China); Li, Suobin [School of Mechanical Engineering and State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University, Xi’an, 710049 (China)

2015-11-01

In this paper, we present the theoretical investigation of Lamb wave propagation in one-dimensional radial phononic crystal (RPC) plates with periodic double-sided corrugations. The dispersion relations, the power transmission spectra, and the displacement fields of the eigenmodes are studied by using the finite element method based on two-dimensional axial symmetry models in cylindrical coordinates. Numerical results show that the proposed RPC plates with periodic double-sided corrugations can yield several band gaps with a variable bandwidth for Lamb waves. The formation mechanism of band gaps in the double-sided RPC plates is attributed to the coupling between the Lamb modes and the in-phase and out-phases resonant eigenmodes of the double-sided corrugations. We investigate the evolution of band gaps in the double-sided RPC plates with the corrugation heights on both sides arranged from an asymmetrical distribution to a symmetrical distribution gradually. Significantly, with the introduction of symmetric double-sided corrugations, the antisymmetric Lamb mode is suppressed by the in-phase resonant eigenmodes of the double-sided corrugations, resulting in the disappearance of the lowest band gap. Furthermore, the effects of the geometrical parameters on the band gaps are further explored numerically.

CMOS-compatible ruggedized high-temperature Lamb wave pressure sensor

International Nuclear Information System (INIS)

Kropelnicki, P; Mu, X J; Randles, A B; Cai, H; Ang, W C; Tsai, J M; Muckensturm, K-M; Vogt, H

2013-01-01

This paper describes the development of a novel ruggedized high-temperature pressure sensor operating in lateral field exited (LFE) Lamb wave mode. The comb-like structure electrodes on top of aluminum nitride (AlN) were used to generate the wave. A membrane was fabricated on SOI wafer with a 10 µm thick device layer. The sensor chip was mounted on a pressure test package and pressure was applied to the backside of the membrane, with a range of 20–100 psi. The temperature coefficient of frequency (TCF) was experimentally measured in the temperature range of −50 °C to 300 °C. By using the modified Butterworth–van Dyke model, coupling coefficients and quality factor were extracted. Temperature-dependent Young's modulus of composite structure was determined using resonance frequency and sensor interdigital transducer (IDT) wavelength which is mainly dominated by an AlN layer. Absolute sensor phase noise was measured at resonance to estimate the sensor pressure and temperature sensitivity. This paper demonstrates an AlN-based pressure sensor which can operate in harsh environment such as oil and gas exploration, automobile and aeronautic applications. (paper)

Lamb wave based automatic damage detection using matching pursuit and machine learning

International Nuclear Information System (INIS)

Agarwal, Sushant; Mitra, Mira

2014-01-01

In this study, matching pursuit (MP) has been tested with machine learning algorithms such as artificial neural networks (ANNs) and support vector machines (SVMs) to automate the process of damage detection in metallic plates. Here, damage detection is done using the Lamb wave response in a thin aluminium plate simulated using a finite element (FE) method. To reduce the complexity of the Lamb wave response, only the A 0 mode is excited and sensed. The procedure adopted for damage detection consists of three major steps, involving signal processing and machine learning (ML). In the first step, MP is used for de-noising and enhancing the sparsity of the database. In the existing literature, MP is used to decompose any signal into a linear combination of waveforms that are selected from a redundant dictionary. In this work, MP is deployed in two stages to make the database sparse as well as to de-noise it. After using MP on the database, it is then passed as input data for ML classifiers. ANN and SVM are used to detect the location of the potential damage from the reduced data. The study demonstrates that the SVM is a robust classifier in the presence of noise and is more efficient than the ANN. Out-of-sample data are used for the validation of the trained and tested classifier. Trained classifiers are found to be successful in the detection of damage with a detection rate of more than 95%. (paper)

205 nm continuous-wave laser: application to the measurement of the Lamb shift in hydrogen

International Nuclear Information System (INIS)

Bourzeix, S.

1995-01-01

The subject of this thesis is the construction of an experimental set-up, and in particular of a tunable continuous-wave laser at 205 nm, for the measurement of the ground state Lamb shift in atomic hydrogen. Chapter 1 deals with the Lamb shift from a historical point of view, and with the interest of its measurement, for metrology and test of quantum electrodynamics. Chapter 2 is devoted to the theory of the hydrogen atom. The principle of the experiment is based on the comparison of two frequencies which are in a ratio of 4: those of the two-photon transitions of 2S-6S or 2S-6D and 1S-3S. Chapter 3 describes the experimental set-up used to measure the 2S-6D transition which is excited by a titanium-sapphire laser at 820 nm. The 205 nm light required to excite the 1S-3S transition is generated by two frequency-doubling of the titanium-sapphire laser, made in non-linear crystals placed in enhancement cavities. Chapter 4 is entirely devoted to the frequency-doubling. After a recall of non-linear optics, the enhancement cavities are described in detail, as well as the results we achieved. At last chapter 5 describes the research for a signal on the 1S-3S transition: the construction of a ground state atomic beam, and the development of the detection system. This work has led to a preliminary measurement of the ground state Lamb shift in atomic hydrogen: L(1S) = 8172.850 (174) MHz whose result is in very good agreement with both the previous measurements and the most recent theoretical results. (author)

Tunable modulation of refracted lamb wave front facilitated by adaptive elastic metasurfaces

Science.gov (United States)

Li, Shilong; Xu, Jiawen; Tang, J.

2018-01-01

This letter reports designs of adaptive metasurfaces capable of modulating incoming wave fronts of elastic waves through electromechanical-tuning of their cells. The proposed elastic metasurfaces are composed of arrayed piezoelectric units with individually connected negative capacitance elements that are online tunable. By adjusting the negative capacitances properly, accurately formed, discontinuous phase profiles along the elastic metasurfaces can be achieved. Subsequently, anomalous refraction with various angles can be realized on the transmitted lowest asymmetric mode Lamb wave. Moreover, designs to facilitate planar focal lenses and source illusion devices can also be accomplished. The proposed flexible and versatile strategy to manipulate elastic waves has potential applications ranging from structural fault detection to vibration/noise control.

Determination of group velocity of propagation of Lamb waves in aluminium plate using piezoelectric transducers

Directory of Open Access Journals (Sweden)

Lašová Z.

2017-06-01

Full Text Available A prior knowledge of group velocities of Lamb wave modes is a key for analysis of time signals in guidedwave based structural health monitoring. The identification of multiple wave modes may be complicated due to dependency of group velocity on frequency (dispersion. These dependencies for infinite plate of constant thickness can be calculated by a numerical solution of analytic equation. Two alternative approaches to determine group velocities of zero-order Lamb wave modes in aluminum plate were used in this work: Two-dimensional Fast Fourier Transform (2D-FFT and methods of time-frequency processing. 2D-FFT requires a high number of time signals in equidistant points, therefore it was applied on data from finite element analysis of wave propagation in the plate. Group velocities for chosen frequencies were also determined using wavelet transform (WT of signals as differencies of times of arrival measured by a pair of piezoelectric transducers. The results from 2D-FFT and wavelet transform were compared to the analytic solution.

Dynamics of hydrogen induced blistering of a low carbon steel sheet by lamb waves analysis; Ramuha no teiryo kaiseki ni yoru hakubanteitansoko no suiso hare no dainamikkusu

Energy Technology Data Exchange (ETDEWEB)

Sato, Teruyoshi.; Takemoto, Mikio. [Aoyama Gakuin University, Tokyo (Japan). Faculty of Science and Engineering

1999-06-15

With the aim of studying the fracture dynamics of environmentally assisted fractures in thin plates, we developed a new source simulation method of the zeroth-order symmetric (or S{sub 0}-) Lamb wave using the experimental overall-transfer function of the system. The transfer function was determined by the time-domain deconvolution of detected S{sub 0}-Lamb component by the artificial fracture source of a compression -type PZT element whose vibration kinetics was estimated by the iteration so that the S{sub o}-waveform detected. Hydrogen induced blistering was found to be caused by the succession of fast Mode-I fracture with source rise times from 0.6 to 1.0{mu}s. The crack volume estimated by the source simulation corresponded to that of fine blistering with an opening displacement of 5{mu}m. As the estimated fracture kinetics of hydrogen blistering coincide with those of delayed fracture of high tension low alloy steel under tensile loading, the kinetics of first and micro-fractures and blistering induced by hydrogen gas precipitation appears to be independent on the hydrogen solubility and strength of steels, the applied stresses and the orientation of cracks. (author)

A Baseline-Free Defect Imaging Technique in Plates Using Time Reversal of Lamb Waves

International Nuclear Information System (INIS)

Jeong, Hyunjo; Cho, Sungjong; Wei, Wei

2011-01-01

We present an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A 0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional sidebands that contain the time-of-flight information on the defect location. One of the side-band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free imaging of a defect. (fundamental areas of phenomenology(including applications))

Non-contact estimation of the bond quality in soldered thin laminate by laser generated lamb waves; Laser reiki ramuha ni yoru handazuke sekisohaku no setsugo seijo no hisesshoku hyoka

Energy Technology Data Exchange (ETDEWEB)

Kasama, H.; Futatsugi, T.; Cho, H.; Takemoto, M. [Aoyama-Gakuin University, Tokyo (Japan). Faculty of Science and Engineering

1998-03-20

The bond quality of a solder-bonded copper laminated plate was modeled into rigid contact (rc) and slip contact (sc) to calculate the velocity dispersion of lamb waves. The velocity dispersion of laser generated lamb waves was measured, and the bond quality or the thickness of a solder layer was evaluated by non-contact. In the model whose bond surface is rc, the velocity dispersion of lamb waves can be calculated under conditions where the stress and displacement in an interface are continuous. In the model whose bond surface is sc, it can be calculated under conditions where an interface slips freely. Weak bond indicates the velocity dispersion between rc and sc. In this model, the velocity dispersion can also be calculated by a change in the thickness of a solder layer and used for quantitative evaluation of a bond interface. A three-layer solder bond manufactured for trial could be evaluated from the velocity dispersion of laser lamb waves. At the room temperature, the change in bond quality near the solder melting point of bond laminate that was judged as rc was investigated. When the solidus temperature is exceeded, the amplitude of lamb waves and the velocity dispersion changed largely. The amplitude of lamb waves increases as the liquid phase ratio increases. The bond quality near the solder melting point can be evaluated using lamb waves. 9 refs., 10 figs., 2 tabs.

Numerical and experimental study of Lamb wave propagation in a two-dimensional acoustic black hole

Energy Technology Data Exchange (ETDEWEB)

Yan, Shiling; Shen, Zhonghua, E-mail: shenzh@njust.edu.cn [Faculty of Science, Nanjing University of Science and Technology, Nanjing 210094 (China); Lomonosov, Alexey M. [Faculty of Science, Nanjing University of Science and Technology, Nanjing 210094 (China); General Physics Institute, Russian Academy of Sciences, 119991 Moscow (Russian Federation)

2016-06-07

The propagation of laser-generated Lamb waves in a two-dimensional acoustic black-hole structure was studied numerically and experimentally. The geometrical acoustic theory has been applied to calculate the beam trajectories in the region of the acoustic black hole. The finite element method was also used to study the time evolution of propagating waves. An optical system based on the laser-Doppler vibration method was assembled. The effect of the focusing wave and the reduction in wave speed of the acoustic black hole has been validated.

Determination of crack size around rivet hole through neural network using ultrasonic Lamb wave

International Nuclear Information System (INIS)

Choi, Sang Woo; Lee, Joon Hyun

1998-01-01

Rivets are typical structural features that are potential initiation sites for fatigue crack due to combination of local stress concentration around rivet hole and moisture trapping. For the viewpoint of structural assurance, it is crucial to evaluate the size of crack around rivets by appropriate nondestructive techniques. Guided waves, which direct wave energy along the plate, carry information about the material in their path and offer a potentially more efficient tool for nondestructive inspection of structural material. Neural network that is considered to be the most suitable for pattern recognition and has been used by researchers in NDE field to classify different types of flaws and flaw size. In this study, crack size determination around rivet through a neural network based on the back-propagation algorithm has been done by extracting some feature from time-domain waveforms of ultrasonic Lamb wave for Al 2024-T3 skin panel of aircraft. Special attention was paid to reduce the coupling effect between transducer and specimen by extracting some features related to only time component data in ultrasonic waveform. It was demonstrated clearly that features extraction based on time component data of the time-domain waveform of Lamb wave was very useful to determine crack size initiated from rivet hole through neural network.

Propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom

Energy Technology Data Exchange (ETDEWEB)

Lee, Kang Il [Kangwon National University, Chuncheon (Korea, Republic of); Choi, Bok Kyoung [Maritime Security Research Center, KIOST, Ansan (Korea, Republic of)

2014-12-15

The present study aims to investigate the propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom. The velocities of the guided waves in a 5-mm-thick acrylic plate were measured by using the axial transmission technique. A pure A0 Lamb mode could be successfully launched in the 5-mm-thick acrylic plate through a time reversal process of Lamb waves, consistent with the fact that the time reversal process can automatically compensate for the dispersive nature of Lamb waves. The experimental velocities of the slow guided wave (SGW) and the time-reversed Lamb wave were found to be in reasonable agreement with the theoretical group velocity of the A0 Lamb mode, suggesting that both the SGW and the time-reversed Lamb wave excited in the 5-mm-thick acrylic plate correspond to the A0 Lamb mode. These results suggest that the time reversal process of Lamb waves can be usefully applied to noninvasive characterization of long cortical bones.

Propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom

International Nuclear Information System (INIS)

Lee, Kang Il; Choi, Bok Kyoung

2014-01-01

The present study aims to investigate the propagation of ultrasonic guided waves in an acrylic plate as a cortical-bone-mimicking phantom. The velocities of the guided waves in a 5-mm-thick acrylic plate were measured by using the axial transmission technique. A pure A0 Lamb mode could be successfully launched in the 5-mm-thick acrylic plate through a time reversal process of Lamb waves, consistent with the fact that the time reversal process can automatically compensate for the dispersive nature of Lamb waves. The experimental velocities of the slow guided wave (SGW) and the time-reversed Lamb wave were found to be in reasonable agreement with the theoretical group velocity of the A0 Lamb mode, suggesting that both the SGW and the time-reversed Lamb wave excited in the 5-mm-thick acrylic plate correspond to the A0 Lamb mode. These results suggest that the time reversal process of Lamb waves can be usefully applied to noninvasive characterization of long cortical bones.

Evaluation of non-chemical seed treatment methods for the control of Phoma valerianellae on lamb`s lettuce seeds

NARCIS (Netherlands)

Schmitt, A.; Koch, E.; Stephan, D.; Kromphardt, C.; Jahn, M.; Krauthausen, H.J.; Forsberg, G.; Werner, S.; Amein, T.; Wright, S.A.I.; Tinivella, F.; Wolf, van der J.M.; Groot, S.P.C.

2009-01-01

The aim of the present study was to identify seed treatment methods for eradicating Phoma valerianellae from lamb`s lettuce seeds in organic vegetable production. Using seeds naturally infested with the pathogen, the effect of three physical methods (hot water, aerated steam, electron treatment) and

Detection of thermal fatigue in composites by second harmonic Lamb waves

International Nuclear Information System (INIS)

Li, Weibin; Cho, Younho; Achenbach, Jan D

2012-01-01

Composite materials which are widely used in the aerospace industry, are usually subjected to frequent variation of temperature. Thermal cyclic loading may induce material degradation. Considering the long-term service of aircraft composites and the importance of safety in the aircraft industry, even a little damage that may be accumulative via thermal fatigue is often of great concern. Therefore, there is a demand to develop non-destructive approaches to evaluate thermal fatigue damage in an early stage. Due to the sensitivity of acoustic nonlinearity to micro-damage, the nonlinear ultrasonic technique has been explored as a promising tool for early detection of micro-damage. This paper investigates an experimental scheme for characterizing thermal fatigue damage in composite laminates using second harmonic Lamb waves. The present results show a monotonic increase of acoustic nonlinearity with respect to thermal fatigue cycles. The experimental observation of the correlation between the acoustic nonlinearity and thermal fatigue cycles in carbon/epoxy laminates verifies that nonlinear Lamb waves can be used to assess thermal fatigue damage rendering improved sensitivity over conventional linear feature based non-destructive evaluation techniques. Velocity and attenuation based ultrasonic studies are carried out for comparison with the nonlinear ultrasonic approach and it is found that nonlinear acoustic parameters are more promising indicators of thermal fatigue damage than linear ones. (paper)

GPU-based local interaction simulation approach for simplified temperature effect modelling in Lamb wave propagation used for damage detection

International Nuclear Information System (INIS)

Kijanka, P; Radecki, R; Packo, P; Staszewski, W J; Uhl, T

2013-01-01

Temperature has a significant effect on Lamb wave propagation. It is important to compensate for this effect when the method is considered for structural damage detection. The paper explores a newly proposed, very efficient numerical simulation tool for Lamb wave propagation modelling in aluminum plates exposed to temperature changes. A local interaction approach implemented with a parallel computing architecture and graphics cards is used for these numerical simulations. The numerical results are compared with the experimental data. The results demonstrate that the proposed approach could be used efficiently to produce a large database required for the development of various temperature compensation procedures in structural health monitoring applications. (paper)

205 nm continuous-wave laser: application to the measurement of the Lamb shift in hydrogen; Laser continu a 205 nm: application a la mesure du deplacement de lamb dans l'hydrogene

Energy Technology Data Exchange (ETDEWEB)

Bourzeix, S

1995-01-15

The subject of this thesis is the construction of an experimental set-up, and in particular of a tunable continuous-wave laser at 205 nm, for the measurement of the ground state Lamb shift in atomic hydrogen. Chapter 1 deals with the Lamb shift from a historical point of view, and with the interest of its measurement, for metrology and test of quantum electrodynamics. Chapter 2 is devoted to the theory of the hydrogen atom. The principle of the experiment is based on the comparison of two frequencies which are in a ratio of 4: those of the two-photon transitions of 2S-6S or 2S-6D and 1S-3S. Chapter 3 describes the experimental set-up used to measure the 2S-6D transition which is excited by a titanium-sapphire laser at 820 nm. The 205 nm light required to excite the 1S-3S transition is generated by two frequency-doubling of the titanium-sapphire laser, made in non-linear crystals placed in enhancement cavities. Chapter 4 is entirely devoted to the frequency-doubling. After a recall of non-linear optics, the enhancement cavities are described in detail, as well as the results we achieved. At last chapter 5 describes the research for a signal on the 1S-3S transition: the construction of a ground state atomic beam, and the development of the detection system. This work has led to a preliminary measurement of the ground state Lamb shift in atomic hydrogen: L(1S) = 8172.850 (174) MHz whose result is in very good agreement with both the previous measurements and the most recent theoretical results. (author)

High-Frequency Guided Wave Scattering by a Partly Through-Thickness Hole Based on 3D Theory

International Nuclear Information System (INIS)

Zhang Hai-Yan; Xu Jian; Ma Shi-Wei

2015-01-01

We present a theoretical investigation of the scattering of high frequency S0 Lamb mode from a circular blind hole defect in a plate based on the 3D theory. The S0 wave is incident at the frequency above the A1 mode cut-off frequency, in which the popular approximate plate theories are inapplicable. Due to the non-symmetric blind hole defect, the scattered fields will contain higher order converted modes in addition to the fundamental S0 and A0 modes. The far-field scattering amplitudes of various propagating Lamb modes for different hole sizes are inspected. The results are compared with those of lower frequencies and some different phenomena are found. Two-dimensional Fourier transform (2DFT) results of transient scattered Lamb and SH wave signals agree well with the analytical dispersion curves, which check the validity of the solutions from another point of view. (paper)

Precision measurement of the 1S Lamb shift in atomic hydrogen

International Nuclear Information System (INIS)

Beausoleil, R.G.; McIntyre, D.H.; Foot, C.J.; Couillaud, B.; Hildum, E.A.; Hansch, T.W.

1987-01-01

The authors used cw Doppler-free two-photon spectroscopy to measure the 1S-2S transition frequency in atomic hydrogen gas with a precision of 6 parts in 10 10 . Their result for the energy level separation is f(1S-2S) = 2 466 061 413.3(1.5) MHz and can be used to extract a value of the 1S Lamb shift. Choosing a value of the Rydberg constant measured independently by high-resolution spectroscopy of the hydrogen Balmer-β transition, the authors obtain a value of Δf/sub Lamb/(1S) = 8 173.3(1.7) MHz, in good agreement with the theoretical prediction of 8 173.06(20) MHz. On the other hand, if they trust the theoretical determination of the 1S Lamb shift, they can interpret our experimental result as a measurement of the Rydberg constant. The authors obtain R∞ = 109 737.315(7) cm -1 , in agreement with recent precise measurements

Lamb Wave Propagation in a Restricted Geometry Composite PI-Joint Specimen (Preprint)

Science.gov (United States)

2011-11-01

adhesive, and were located along the length and height of the specimen as depicted in Figure 3. The sensors were 6.35 mm round disks of PZT , with a...in both cases for R1, R2, and R3. 3D Finite Element Model Geometry 200mm length 50mm width 140mm height x z y PZT Actuation Sensor...health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection”, Smart Mater. Struct., Vol. 14, No. 6, 2005. 16

Theoretical study on guided wave propagation in (1 - x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 (x = 0.29 and 0.33) single crystal plates

International Nuclear Information System (INIS)

Chen Chuanwen; Zhang Rui; Cao Wenwu

2009-01-01

The propagation of guided waves in free standing (1 - x)Pb(Mg 1/3 Nb 2/3 )O 3 -xPbTiO 3 [PMN-xPT] (x = 0.29 or 0.33) single crystal plates has been studied theoretically. The polar directions are in the (111) family directions of the cubic reference coordinates but the crystals are being polarized along [0 0 1] c , [0 1 1] c and [1 1 1] c of the cubic reference directions so that the effective microscopic symmetries are 4mm, mm2 and 3m, respectively. Multiple mode couplings appear in the dispersion curves for both the symmetric and the antisymmetric Lamb and shear horizontal modes. The velocities of most guided waves decrease rapidly with frequency. Then, after passing a minimum, they begin to increase with frequency and eventually saturate to the shear wave velocity v sz (or v 1 = 3507 m s -1 for [1 1 1] c polarized sample). For a [1 1 1] c polarized single domain PMN-0.33PT sample, the S 1 mode instead of the S 0 mode approaches the Rayleigh velocity v R at high frequencies.

Acousto-optic modulation of a photonic crystal nanocavity with Lamb waves in microwave K band

Energy Technology Data Exchange (ETDEWEB)

Tadesse, Semere A. [Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States); School of Physics and Astronomy, University of Minnesota, Minneapolis, Minnesota 55455 (United States); Li, Huan; Liu, Qiyu; Li, Mo, E-mail: moli@umn.edu [Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

2015-11-16

Integrating nanoscale electromechanical transducers and nanophotonic devices potentially can enable acousto-optic devices to reach unprecedented high frequencies and modulation efficiency. Here, we demonstrate acousto-optic modulation of a photonic crystal nanocavity using Lamb waves with frequency up to 19 GHz, reaching the microwave K band. The devices are fabricated in suspended aluminum nitride membrane. Excitation of acoustic waves is achieved with interdigital transducers with period as small as 300 nm. Confining both acoustic wave and optical wave within the thickness of the membrane leads to improved acousto-optic modulation efficiency in these devices than that obtained in previous surface acoustic wave devices. Our system demonstrates a scalable optomechanical platform where strong acousto-optic coupling between cavity-confined photons and high frequency traveling phonons can be explored.

Guided ultrasonic wave beam skew in silicon wafers

Science.gov (United States)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2018-04-01

In the photovoltaic industry, monocrystalline silicon wafers are employed for solar cells with high conversion efficiency. Micro-cracks induced by the cutting process in the thin wafers can lead to brittle wafer fracture. Guided ultrasonic waves would offer an efficient methodology for the in-process non-destructive testing of wafers to assess micro-crack density. The material anisotropy of the monocrystalline silicon leads to variations of the guided wave characteristics, depending on the propagation direction relative to the crystal orientation. Selective guided ultrasonic wave excitation was achieved using a contact piezoelectric transducer with custom-made wedges for the A0 and S0 Lamb wave modes and a transducer holder to achieve controlled contact pressure and orientation. The out-of-plane component of the guided wave propagation was measured using a non-contact laser interferometer. The phase slowness (velocity) of the two fundamental Lamb wave modes was measured experimentally for varying propagation directions relative to the crystal orientation and found to match theoretical predictions. Significant wave beam skew was observed experimentally, especially for the S0 mode, and investigated from 3D finite element simulations. Good agreement was found with the theoretical predictions based on nominal material properties of the silicon wafer. The important contribution of guided wave beam skewing effects for the non-destructive testing of silicon wafers was demonstrated.

Comparative study of electromechanical impedance and Lamb wave techniques for fatigue crack detection and monitoring in metallic structures

Science.gov (United States)

Lim, Say Ian; Liu, Yu; Soh, Chee Kiong

2012-04-01

Fatigue cracks often initiate at the weld toes of welded steel connections. Usually, these cracks cannot be identified by the naked eyes. Existing identification methods like dye-penetration test and alternating current potential drop (ACPD) may be useful for detecting fatigue cracks at the weld toes. To apply these non-destructive evaluation (NDE) techniques, the potential sites have to be accessible during inspection. Therefore, there is a need to explore other detection and monitoring techniques for fatigue cracks especially when their locations are inaccessible or cost of access is uneconomical. Electro-mechanical Impedance (EMI) and Lamb wave techniques are two fast growing techniques in the Structural Health Monitoring (SHM) community. These techniques use piezoelectric ceramics (PZT) for actuation and sensing. Since the monitoring site is only needed to be accessed once for the instrumentation of the transducers, remote monitoring is made possible. The permanent locations of these transducers also translate to having consistent measurement for monitoring. The main focus of this study is to conduct a comparative investigation on the effectiveness and efficiency of the EMI technique and the Lamb wave technique for successful fatigue crack identification and monitoring of welded steel connections using piezoelectric transducers. A laboratory-sized non-load carrying fillet weld specimen is used in this study. The specimen is subjected to cyclic tensile load and data for both techniques are acquired at stipulated intervals. It can be concluded that the EMI technique is sensitive to the crack initiation phase while the Lamb wave technique correlates well with the crack propagation phase.

Dispersion of Lamb waves in a honeycomb composite sandwich panel.

Science.gov (United States)

Baid, Harsh; Schaal, Christoph; Samajder, Himadri; Mal, Ajit

2015-02-01

Composite materials are increasingly being used in advanced aircraft and aerospace structures. Despite their many advantages, composites are often susceptible to hidden damages that may occur during manufacturing and/or service of the structure. Therefore, safe operation of composite structures requires careful monitoring of the initiation and growth of such defects. Ultrasonic methods using guided waves offer a reliable and cost effective method for defects monitoring in advanced structures due to their long propagation range and their sensitivity to defects in their propagation path. In this paper, some of the useful properties of guided Lamb type waves are investigated, using analytical, numerical and experimental methods, in an effort to provide the knowledge base required for the development of viable structural health monitoring systems for composite structures. The laboratory experiments involve a pitch-catch method in which a pair of movable transducers is placed on the outside surface of the structure for generating and recording the wave signals. The specific cases considered include an aluminum plate, a woven composite laminate and an aluminum honeycomb sandwich panel. The agreement between experimental, numerical and theoretical results are shown to be excellent in certain frequency ranges, providing a guidance for the design of effective inspection systems. Copyright © 2014 Elsevier B.V. All rights reserved.

Lamb shift in helium-like uranium

International Nuclear Information System (INIS)

Munger, C.T. Jr.

1987-01-01

The author reports an experimental value of 70.4 (8.3) ev for the one-electron Lamb shift in uranium, in agreement with the theoretical value of 75.3 (0.4) ev. He extracts the Lamb shift from a beam-foil time-of-flight measurement of the 54.4 (3.4) ps lifetime of the 1s2p/sub 1/2/ 3 P 0 state of helium-like (two electron) uranium

Precision measurement of the 1S ground-state Lamb shift in atomic hydrogen and deuterium by frequency comparison

International Nuclear Information System (INIS)

Weitz, M.; Huber, A.; Schmidt-Kaler, F.; Leibfried, D.; Vassen, W.; Zimmermann, C.; Pachucki, K.; Haensch, T.W.; Julien, L.; Biraben, F.

1995-01-01

We have measured the hydrogen and deuterium 1S Lamb shift by direct optical frequency comparison of the 1S-2S and 2S-4S/4D two-photon transitions. Our result of 8172.874(60) MHz for the 1S Lamb shift in hydrogen is in agreement with the theoretical value of 8172.802(40) MHz. For the 1S Lamb shift in deuterium, we obtain a value of 8183.807(78) MHz, from which we derive a deuteron matter radium of 1.945(28) fm. The precision of our value for the 1S Lamb shift has surpassed that of radio frequency measurements of the 2S-2P Lamb shift. By comparison with a recent absolute measurement of the hydrogen 1S-2S transition frequency, we deduce a value for the Rydberg constant R ∞ =109 737.315 684 9(30) cm -1

Lamb Wave Stiffness Characterization of Composites Undergoing Thermal-Mechanical Aging

Science.gov (United States)

Seale, Michael D.; Madaras, Eric I.

2004-01-01

The introduction of new, advanced composite materials into aviation systems requires a thorough understanding of the long term effects of combined thermal and mechanical loading upon those materials. Analytical methods investigating the effects of intense thermal heating combined with mechanical loading have been investigated. The damage mechanisms and fatigue lives were dependent on test parameters as well as stress levels. Castelli, et al. identified matrix dominated failure modes for out-of-phase cycling and fiber dominated damage modes for in-phase cycling. In recent years, ultrasonic methods have been developed that can measure the mechanical stiffness of composites. To help evaluate the effect of aging, a suitably designed Lamb wave measurement system is being used to obtain bending and out-of-plane stiffness coefficients of composite laminates undergoing thermal-mechanical loading. The system works by exciting an antisymmetric Lamb wave and calculating the velocity at each frequency from the known transducer separation and the measured time-of-flight. The same peak in the waveforms received at various distances is used to measure the time difference between the signals. The velocity measurements are accurate and repeatable to within 1% resulting in reconstructed stiffness values repeatable to within 4%. Given the material density and plate thickness, the bending and out-of-plane shear stiffnesses are calculated from a reconstruction of the dispersion curve. A mechanical scanner is used to move the sensors over the surface to map the time-of-flight, velocity, or stiffnesses of the entire specimen. Access to only one side of the material is required and no immersion or couplants are required because the sensors are dry coupled to the surface of the plate. In this study, the elastic stiffnesses D(sub 11), D(sub 22), A(sub 44), and A(sub 55) as well as time-of-flight measurements for composite samples that have undergone combined thermal and mechanical aging for

Research on a Lamb Wave and Particle Filter-Based On-Line Crack Propagation Prognosis Method

OpenAIRE

Chen, Jian; Yuan, Shenfang; Qiu, Lei; Cai, Jian; Yang, Weibo

2016-01-01

Prognostics and health management techniques have drawn widespread attention due to their ability to facilitate maintenance activities based on need. On-line prognosis of fatigue crack propagation can offer information for optimizing operation and maintenance strategies in real-time. This paper proposes a Lamb wave-particle filter (LW-PF)-based method for on-line prognosis of fatigue crack propagation which takes advantages of the possibility of on-line monitoring to evaluate the actual crack...

Lamb-shift measurement in hydrogenic phosphorus

International Nuclear Information System (INIS)

Pross, H.; Budelsky, D.; Kremer, L.; Platte, D.; von Brentano, P.; Gassen, J.; Mueller, D.; Scheuer, F.; Pape, A.; Sens, J.C.

1993-01-01

The final result of a 2s 2 S 1/2-- 2p 2 P 1/2 Lamb-shift measurement by the laser resonance method in hydrogenic phosphorus is reported. Metastable 2s 2 S 1/2 ions were prepared using a β∼0.08 velocity beam of 31 P 14+ ions obtained from the MP tandem accelerator at the Centre de Recherches Nucleaires in Strasbourg. From the metastable state the transition to the 2p 2 P 3/2 state was induced with a high-power dye laser leading to a measured transition energy of ΔE=2.231 33(12) eV. Subtracting the well-known fine-structure splitting ΔE FS =2.314 82(2) eV, the Lamb shift is deduced to be E expt (LS)=20 188(29) GHz. This result is compared with the theoretical value E theor (LS)=20 254(10) GHz and with other experimental results for the Lamb shift in the region Z≤18. Finally, the utility of the Lamb-shift measurements in testing the G(Zα) function of the self-energy, which includes only terms in (Zα) n , n≥6, is discussed

Report: Prevalence and antibiotic trials against Salmonella enterica isolated from diarrheic lambs and kids.

Science.gov (United States)

Iqbal, Muhammad Kashif; Ijaz, Muhammad; Aslam, Hassaan Bin; Farooqi, Shahid Hussain; Ahmad, Syed Saleem; Akhtar, Raheela

2017-11-01

Salmonella enterica (S. enterica) is the major zoonotic threat for small ruminants and humans responsible for huge economic losses and high mortality in Pakistan. Lambs and kids of Lahore district were examined to determine the prevalence, hematology and chemotherapy of S. enterica. A total of 200 diarrheic samples (n=100 lambs; n=100 kids) were collected and examined; 59 (29.50%) were found positive for S. enterica. Lambs had lightly greater prevalence (31%) than kids (29%). The frequency analysis (OR=1.16 [reciprocal =0.87]) showed non-significant difference in both the lambs and kids. The significant decrease (Pℜ0.001) in hemoglobin, pack cell volume and total erythrocyte count was observed in infected lambs and kids. Results of in-vitro antibiotic susceptibility test revealed that S. enteric isolated from both lambs and kids were susceptible to levofloxacin, ciprofloxacin, ofloxacin, gentamicin, azithromycin, tobramycin, amoxicillin, ampicillin and nalidixic acid. Where as the results of in vivo antibiotic trials showed that isolates from both lambs and the kids with diarrhea were susceptible to levofloxacin and ciprofloxacin.

Transducer Placement Option of Lamb Wave SHM System for Hotspot Damage Monitoring

Directory of Open Access Journals (Sweden)

Vincentius Ewald

2018-04-01

Full Text Available In this paper, we investigated transducer placement strategies for detecting cracks in primary aircraft structures using ultrasonic Structural Health Monitoring (SHM. The approach developed is for an expected damage location based on fracture mechanics, for example fatigue crack growth in a high stress location. To assess the performance of the developed approach, finite-element (FE modelling of a damage-tolerant aluminum fuselage has been performed by introducing an artificial crack at a rivet hole into the structural FE model and assessing its influence on the Lamb wave propagation, compared to a baseline measurement simulation. The efficient practical sensor position was determined from the largest change in area that is covered by reflected and missing wave scatter using an additive color model. Blob detection algorithms were employed to determine the boundaries of this area and to calculate the blob centroid. To demonstrate that the technique can be generalized, the results from different crack lengths and from tilted crack are also presented.

A pulse coding and decoding strategy to perform Lamb wave inspections using simultaneously multiple actuators

Science.gov (United States)

De Marchi, Luca; Marzani, Alessandro; Moll, Jochen; Kudela, Paweł; Radzieński, Maciej; Ostachowicz, Wiesław

2017-07-01

The performance of Lamb wave based monitoring systems, both in terms of diagnosis time and data complexity, can be enhanced by increasing the number of transducers used to actuate simultaneously the guided waves in the inspected medium. However, in case of multiple simultaneously-operated actuators the interference among the excited wave modes within the acquired signals has to be considered for the further processing. To this aim, in this work a code division strategy based on the Warped Frequency Transform is presented. At first, the proposed procedure encodes actuation pulses using Gold sequences. Next, for each considered actuator the acquired signals are compensated from dispersion by cross correlating the warped version of the actuated and received signals. Compensated signals form the base for a final wavenumber imaging meant at emphasizing defects and or anomalies by removing incident wavefield and edge reflections. The proposed strategy is tested numerically, and validated through an experiment in which guided waves are actuated in a plate by four piezoelectric transducers operating simultaneously.

Prediction and measurement of the reflection of the fundamental anti-symmetric Lamb wave from cracks and notches

International Nuclear Information System (INIS)

Lowe, M.J.S.; Cawley, P.; Kao, J-Y; Diligent, O.

2000-01-01

The interaction of the fundamental antisymmetric Lamb wave (a o ) with cracks and with notches of different depth and width has been investigated both experimentally and by finite element analysis. Excellent agreement between the predictions and the measurements has been obtained. It has been shown that the reflection coefficient is a function of both the notch width to wavelength and notch depth to wavelength ratios. Both the relationship between the reflection coefficient and notch, depth, and the frequency dependence of the reflection coefficient, are very different for the a o mode compared to the s o mode which was studied earlier. Physical insight into the reasons for the different behavior is given by examination of the stress fields and opening displacements at the crack or notch

The Lamb shift in heliumlike uranium (U90+)

International Nuclear Information System (INIS)

Munger, C.T. Jr.

1987-01-01

An experimental value of 70.4 (8.3) eV for the one-electron Lamb shift in uranium is reported, in agreement with the theoretical value of 75.3 (0.4) eV. The Lamb shift is extracted from a beam-foil time-of-flight measurement of the 54.4 (3.4) ps lifetime of the 1s 2p/sub 1/2/ 3 P 0 state of heliumlike (two-electron) uranium. 18 figs

2-D FEM Simulation of Propagation and Radiation of Leaky Lamb Wave in a Plate-Type Ultrasonic Waveguide Sensor

Energy Technology Data Exchange (ETDEWEB)

Park, Sang-Jin; Kim, Hoe-Woong; Joo, Young-Sang; Kim, Sung-Kyun; Kim, Jong-Bum [KAERI, Daejeon (Korea, Republic of)

2016-05-15

This paper introduces the 2-D FEM simulation of the propagation and radiation of the leaky Lamb wave in and from a plate-type ultrasonic waveguide sensor conducted for the radiation beam profile analysis. The FEM simulations are performed with three different excitation frequencies and the radiation beam profiles obtained from FEM simulations are compared with those obtained from corresponding experiments. This paper deals with the 2-D FEM simulation of the propagation and radiation of the leaky Lamb wave in and from a plate-type ultrasonic waveguide sensor conducted to analyze the radiation beam profiles. The radiation beam profile results obtained from the FEM simulation show good agreement with the ones obtained from the experiment. This result will be utilized to improve the performance of the developed waveguide sensor. The quality of the visualized image is mainly affected by beam profile characteristics of the leaky wave radiated from the waveguide sensor. However, the relationships between the radiation beam profile and many parameters of the waveguide sensor are not fully revealed yet. Therefore, further parametric studies are necessary to improve the performance of the sensor and the finite element method (FEM) is one of the most effective tools for the parametric study.

Is the Lamb Promotion Still Working?

OpenAIRE

Capps, Oral, Jr.; Williams, Gary W.

2008-01-01

This objective of this study is to update last year’s analysis of the effectiveness of the lamb advertising and promotion program of the American Lamb Board (ALB). The main conclusion is that the lamb checkoff program is still working effectively to increase lamb consumption and sales in the United States. The analysis shows that ALB lamb promotion programs have generated roughly 8 additional pounds of total lamb consumption per dollar spent on advertising and promotion and $44.45 in addition...

Lamb wave band gaps in a double-sided phononic plate

Science.gov (United States)

Wang, Peng; Chen, Tian-Ning; Yu, Kun-Peng; Wang, Xiao-Peng

2013-02-01

In this paper, we report on the theoretical investigation of the propagation characteristics of Lamb wave in a phononic crystal structure constituted by a square array of cylindrical stubs deposited on both sides of a thin homogeneous plate. The dispersion relations, the power transmission spectra, and the displacement fields of the eigenmodes are studied by using the finite-element method. We investigate the evolution of band gaps in the double-sided phononic plate with stub height on both sides arranged from an asymmetrical distribution to a symmetrical distribution gradually. Numerical results show that as the double stubs in a unit cell arranged more symmetrically on both sides, band width shifts, new band gaps appear, and the bands become flat due to localized resonant modes which couple with plate modes. Specially, more band gaps and flat bands can be found in the symmetrical system as a result of local resonances of the stubs which interact in a stronger way with the plate modes. Moreover, the symmetrical double-sided plate exhibits lower and smaller band gap than that of the asymmetrical plate. These propagation properties of elastic or acoustic waves in the double-sided plate can potentially be utilized to generate filters, slow the group velocity, low-frequency sound insulation, and design acoustic sensors.

Deuterium Lamb shift via quenching-radiation anisotropy measurements

International Nuclear Information System (INIS)

van Wijngaarden, A.; Drake, G.W.F.

1978-01-01

The Lamb shift of a hydrogenic ion can be deduced from the anisotropy in the angular distribution of the 2s/sub 1/2/-1s/sub 1/2/ electric field quenching radiation. The accuracy of our previous anisotropy measurement for deuterium is improved to about +- 150 ppm. The derived Lamb shift is (1059.36 +- 0.16) MHz. The sources of error are carefully analyzed and the prospects for further improvements in the accuracy are discussed

Simulation of Detecting Damage in Composite Stiffened Panel Using Lamb Waves

Science.gov (United States)

Wang, John T.; Ross, Richard W.; Huang, Guo L.; Yuan, Fuh G.

2013-01-01

Lamb wave damage detection in a composite stiffened panel is simulated by performing explicit transient dynamic finite element analyses and using signal imaging techniques. This virtual test process does not need to use real structures, actuators/sensors, or laboratory equipment. Quasi-isotropic laminates are used for the stiffened panels. Two types of damage are studied. One type is a damage in the skin bay and the other type is a debond between the stiffener flange and the skin. Innovative approaches for identifying the damage location and imaging the damage were developed. The damage location is identified by finding the intersection of the damage locus and the path of the time reversal wave packet re-emitted from the sensor nodes. The damage locus is a circle that envelops the potential damage locations. Its center is at the actuator location and its radius is computed by multiplying the group velocity by the time of flight to damage. To create a damage image for estimating the size of damage, a group of nodes in the neighborhood of the damage location is identified for applying an image condition. The image condition, computed at a finite element node, is the zero-lag cross-correlation (ZLCC) of the time-reversed incident wave signal and the time reversal wave signal from the sensor nodes. This damage imaging process is computationally efficient since only the ZLCC values of a small amount of nodes in the neighborhood of the identified damage location are computed instead of those of the full model.

Comparison of parasitological and productive traits of Criollo lambs native to the central Mexican Plateau and Suffolk lambs experimentally infected with Haemonchus contortus.

Science.gov (United States)

Alba-Hurtado, F; Romero-Escobedo, E; Muñoz-Guzmán, M A; Torres-Hernández, G; Becerril-Pérez, C M

2010-09-20

The study compares the parasitological and productive traits of Criollo lambs native to the central Mexican Plateau (CNCMP) and Suffolk (SU) lambs experimentally infected with Haemonchus contortus. CNCMP lambs (n=20) and SU lambs (n=15) were infected with L3 of H. contortus while five lambs of each genotype were kept as controls. Fecal egg count (FEC), packed cell volume (PCV), blood eosinophil number (BEN), ocular mucous membrane color (as measured by the FAMACHA index), changes in body condition score (BCS) and cumulative live weight gain (CLWG) were measured weekly during a 20-week period. On week 20, all animals were euthanized and the number of adult worms (AW) in the abomasum was counted. Infected SU lambs had higher (p<0.05) FEC and AW mean values compared to CNCMP lambs, which had a higher mean BEN count (p<0.05). Infected lambs had lower PCV values than controls, regardless of genotype, and had a negative correlation (r=-0.84, p<0.05) with the FAMACHA index. BCS tended to decline for infected SU lambs and increased slightly for infected CNCMP lambs. CLWG differed in all groups (p<0.05); infected SU lambs gained 12.1+/-1.9kg, infected CNCMP lambs gained 18.8+/-0.7kg, control SU lambs gained 34.6+/-1.6kg, and control CNCMP lambs gained 26.9+/-0.8kg. In conclusion, CNCMP lambs had a smaller worm burden, a better ability to maintain their productive traits, and were less affected by infection with Haemonchus contortus.

QEDMOD: Fortran program for calculating the model Lamb-shift operator

Science.gov (United States)

Shabaev, V. M.; Tupitsyn, I. I.; Yerokhin, V. A.

2018-02-01

We present Fortran package QEDMOD for computing the model QED operator hQED that can be used to account for the Lamb shift in accurate atomic-structure calculations. The package routines calculate the matrix elements of hQED with the user-specified one-electron wave functions. The operator can be used to calculate Lamb shift in many-electron atomic systems with a typical accuracy of few percent, either by evaluating the matrix element of hQED with the many-electron wave function, or by adding hQED to the Dirac-Coulomb-Breit Hamiltonian.

Effect of system of lamb rearing and season on early post-partum fertility of ewes and growth performance of lambs in Katahdin sheep.

Science.gov (United States)

Rastle-Simpson, S; D'Souza, K; Redhead, A; Singh-Knights, D; Baptiste, Q; Knights, M

2017-10-01

The effect of season (S), lamb rearing system (RT) and grain supplementation (GS) on post-partum fertility in Katahdin ewes and growth in Katahdin lambs was evaluated. Katahdin ewes were bred to lamb in fall (n = 36) or spring (n = 56) and at approximately 2.5 months post-partum were randomly assigned to be permanently separated or to continue to suckle their lambs for an additional 3 months. All ewes were joined with rams following treatment to synchronize oestrus. Weaned (W, n = 84) and continuously suckled lambs (CSK, n = 88) were fed forage only (n = 84; hay and pasture for fall- and spring-born lambs respectively) or were supplemented (n = 88; 18% crude protein ration ad libitum) and all weighed biweekly. Ewes rebred in the fall had a shorter ram introduction to lambing interval (p ewes lambing was not affected by season. The first service lambing rate was lower in ewes continuously suckling lambs in the spring, but not in the fall breeding season (S × RT, p = 0.03). Lambs that continuously suckled their dams and were supplemented grew quicker and gained more (p ewes are capable of early rebreeding post-partum while suckling their lambs, which makes them suited for use in accelerated lambing programmes. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

Beam paths of flexural Lamb waves at high frequency in the first band within phononic crystal-based acoustic lenses

Directory of Open Access Journals (Sweden)

J. Zhao

2014-12-01

Full Text Available This work deals with an analytical and numerical study of the focusing of the lowest order anti-symmetric Lamb wave in gradient index phononic crystals. Computing the ray trajectories of the elastic beam allowed us to analyze the lateral dimensions and shape of the focus, either in the inner or behind the phononic crystal-based acoustic lenses, for frequencies within a broad range in the first band. We analyzed and discussed the focusing behaviors inside the acoustic lenses where the focalization at sub-wavelength scale was achieved. The focalization behind the gradient index phononic crystal is shown to be efficient as well: we report on FMHM = 0.63λ at 11MHz.

Cooperative Lamb shift and the cooperative decay rate for an initially detuned phased state

International Nuclear Information System (INIS)

Friedberg, Richard; Manassah, Jamal T.

2010-01-01

The cooperative Lamb shift (CLS) is hard to measure because in samples much larger than a resonant wavelength it is much smaller, for an initially prepared resonantly phased state, than the cooperative decay rate (CDR). We show, however, that if the phasing of the initial state is detuned so that the spatial wave vector is k 1 congruent with k 0 ±O((1/R)) (where k 0 =ω 0 /c is the resonant frequency), the CLS grows to 'giant' magnitudes making it comparable to the CDR. Moreover, for certain controlled values of detuning, the initial CDR becomes small so that the dynamical Lamb shift (DLS) can be measured over a considerable period of time.

Effect of the dam’s feeding regimen on the meat quality of light suckling lambs

Directory of Open Access Journals (Sweden)

G. Molle

2010-04-01

Full Text Available In order to verify the effect of the introduction of concentrates without GMO risk and at low aflatoxin risk in the diet of grazing milk ewes on the quanti-qualitative production of meat of their milk-fed light lambs, two trials were carried out - in Sicily, on 32 Comisana lambs, slaughtered at 49±4 days (trial 1; and in Sardinia, on 28 Sarda lambs, slaughtered at 31±4 days(trial 2 - comparing the following grazing dams’ feeding regimes: High stocking rate + Organic (barley – tickbean or pea Concentrate (HO; High stocking rate + Conventional (maize-soybean Concentrate (HC; Low stocking rate + Organic Concentrate (LO; Low stocking rate + Conventional Concentrate (LC. Lamb performances, carcass quality, meat colour and lipid content were not modified by dam’s feeding regimen. However, significant differences were observed in the fatty acid (FA composition of the intramuscular fat of the older suckling lambs of trial 1. The main variation concerned n-3 polyunsaturated FAs and conjugated linoleic acids.

Precise Determination of the 1s Lamb Shift in Hydrogen-Like Lead and Gold Using Microcalorimeters

Science.gov (United States)

Kraft-Bermuth, S.; Andrianov, V.; Bleile, A.; Echler, A.; Egelhof, P.; Grabitz, P.; Ilieva, S.; Kiselev, O.; Kilbourne, C.; McCammon, D.;

Experimental Lamb mode identification in a plate containing a hole using dual signal processing

International Nuclear Information System (INIS)

Grondel, Sébastien; Assaad, Jamal; Youbi, Faysal El; Moulin, Emmanuel; Leyla, Najib Abou

2008-01-01

The identification of Lamb mode amplitude variation as a function of the damage evolution is still the most difficult step in the process of damage monitoring using embedded Lamb wave-based systems. The aim of this paper is to propose a simple system based on the generation of two different frequencies in order to better identify Lamb mode amplitude and to avoid false data interpretation in plates containing a hole of variable diameter. This identification is based on a simple relation between the short-time Fourier transform and the two-dimensional Fourier transform. Experimentally, a 3 mm thick aluminium plate is used and the two frequencies have been chosen equal to 400 kHz and 600 kHz in order to generate the two first fundamental Lamb waves

Real-Time Leaky Lamb Wave Spectrum Measurement and Its Application to NDE of Composites

Science.gov (United States)

Lih, Shyh-Shiuh; Bar-Cohen, Yoseph

1999-01-01

Numerous analytical and theoretical studies of the behavior of leaky Lamb waves (LLW) in composite materials were documented in the literature. One of the key issues that are constraining the application of this method as a practical tool is the amount of data that needs to be acquired and the slow process that is involved with such experiments. Recently, a methodology that allows quasi real-time acquisition of LLW dispersion data was developed. At each angle of incidence the reflection spectrum is available in real time from the experimental setup and it can be used for rapid detection of the defects. This technique can be used to rapidly acquire the various plate wave modes along various angles of incidence for the characterization of the material elastic properties. The experimental method and data acquisition technique will be described in this paper. Experimental data was used to examine a series of flaws including porosity and delaminations and demonstrated the efficiency of the developed technique.

Influence of Production System, Sex and Litter Size on Growth Rates in Turcana Lambs

Directory of Open Access Journals (Sweden)

Dinu Gavojdian

2013-10-01

Full Text Available Lamb meat production has become the main source of income in the Romanian sheep farming industry, representing over 66% of the total returns. Turcana breed represents over 70% of the national flock, and 92% of the sheep bred in western Romania. However, meat production potential and growth rates of the breed are low, and thus strategies to improve performance of the Turcana lambs need to be identified. Aim of the current research was to evaluate the effects that sex and litter size have on the growth rates of lambs from Turcana breed under extensive and semi-intensive production systems. Weaning weight was significantly (p≤0.001 influenced by the production system, with lambs reared extensively registering a average body weights of 18.23±0.094 kg at the age of 90 days, while the semi-intensively reared lambs registered an average weight of 20.19±0.082 kg. It was concluded that all three factors taken into study significantly influence growth rates in Turcana lambs and that weight of the lamb(s at the age of 28 days should be included as a selection trait within the Turcana breed genetic improvement plan.

Time-Frequency Analysis of the Dispersion of Lamb Modes

Science.gov (United States)

Prosser, W. H.; Seale, Michael D.; Smith, Barry T.

1999-01-01

Accurate knowledge of the velocity dispersion of Lamb modes is important for ultrasonic nondestructive evaluation methods used in detecting and locating flaws in thin plates and in determining their elastic stiffness coefficients. Lamb mode dispersion is also important in the acoustic emission technique for accurately triangulating the location of emissions in thin plates. In this research, the ability to characterize Lamb mode dispersion through a time-frequency analysis (the pseudo Wigner-Ville distribution) was demonstrated. A major advantage of time-frequency methods is the ability to analyze acoustic signals containing multiple propagation modes, which overlap and superimpose in the time domain signal. By combining time-frequency analysis with a broadband acoustic excitation source, the dispersion of multiple Lamb modes over a wide frequency range can be determined from as little as a single measurement. In addition, the technique provides a direct measurement of the group velocity dispersion. The technique was first demonstrated in the analysis of a simulated waveform in an aluminum plate in which the Lamb mode dispersion was well known. Portions of the dispersion curves of the A(sub 0), A(sub 1), S(sub 0), and S(sub 2)Lamb modes were obtained from this one waveform. The technique was also applied for the analysis of experimental waveforms from a unidirectional graphite/epoxy composite plate. Measurements were made both along, and perpendicular to the fiber direction. In this case, the signals contained only the lowest order symmetric and antisymmetric modes. A least squares fit of the results from several source to detector distances was used. Theoretical dispersion curves were calculated and are shown to be in good agreement with experimental results.

BLOOD METABOLIC HORMONES AND LEPTIN IN GROWING LAMBS

Directory of Open Access Journals (Sweden)

Zvonko Antunović

2010-12-01

Full Text Available The aim of this paper is to determine the concentration of blood metabolic hormones and leptin levels in growing lambs. The research was carried out on Tsigai lambs in two periods (suckling and fattening during the winter feeding season. Lambs were suckling and ate a food mixture and alfalfa hay ad libitum, while during the fattening period they were fed only with the above mentioned mixture and alfalfa hay ad libitum. Their blood was analyzed on 35th and 75th day of age. Concentrations of minsulin, leptin and thyroid hormones were determined in the blood serum of lambs during both periods. In the blood of fattening lambs significantly higher (P0.05 insulin concentrations (1.05 and 0.54 μU/mL, were determined, compared to suckling lambs. A significant strong positive correlation between serum leptin and insulin (r = 0.85, P0.05. The concentration of thyroid hormones did not significantly differ depending on the period of measurement. These changes indicate that the measurement concentrations of metabolic hormones and leptin in blood are very important in order to understand the changes of metabolism and nutrient supply in growing lambs.

Lamb shift measurement in hydrogenlike phosphorus

International Nuclear Information System (INIS)

Mueller, D.; Gassen, J.; Kremer, L.

1988-01-01

In hydrogenlike phosphorus ions the 2S 1/2 -2P 1/2 energy splitting (Lamb shift) has been found to be E exp (LS)=0.08343(29) eV using laser spectroscopy. This result is to be compared with the most recent theoretical value E th (LS)=0.08376(4) eV by Mohr and Johnson and Soff

Second-harmonic generation of Lamb modes in a solid layer supported by a semi-infinite substrate

International Nuclear Information System (INIS)

Deng Mingxi

2004-01-01

Using a second-order perturbation approximation and a modal expansion analysis approach, this study develops an effective technique for studying the generation of second harmonics of Lamb modes propagating in the composite structure consisting of a solid layer supported by a semi-infinite substrate. The nonlinearity in the elastic wave motion process can result in the generation of second harmonics of primary Lamb mode propagation in the composite structure, and this nonlinearity may be treated as a second-order perturbation of the elastic response of the primary waves. There are second-order bulk and surface/interface driving sources in the composite structure wherever the primary Lamb modes propagate. These driving sources can be thought of as the forcing functions of a finite series of double-frequency Lamb modes (DFLMs) in terms of the approach of modal expansion analysis for waveguide excitation. The fields of the second harmonics of the primary Lamb modes can be regarded as superpositions of the fields of a finite series of DFLMs. Although Lamb modes are dispersive, the field of one DFLM component can have a cumulative growth effect when its phase velocity exactly or approximately equals that of a primary Lamb mode. The formal solutions for the second harmonics of Lamb modes have been obtained. The numerical simulations clearly show the physical process of the generation of second harmonics of Lamb modes in the composite structure. The complicated problems of second-harmonic generation of Lamb modes have been exactly determined within the second-order perturbation approximation

Environmental influences on age at first lambing and lambing ...

African Journals Online (AJOL)

The effects of different environmental factors on age at first lambing and lambing interval of Yankasa sheep kept at the National Animal Production Research Institute, Shika, were studied. Least-squares means ( ± SE) for age at first lambing and lambing interval were respectively, 597.2 ±12.6 days and 253.1± 2.9 days.

Fatty Acids Profile of Intramuscular Fat in Light Lambs Traditionally and Artificially Reared

Directory of Open Access Journals (Sweden)

Milan MARGETÍN

2014-03-01

Full Text Available The quality of 40 carcasses of light lambs of the synthetic population of Slovak Dairy sheep from (a artificial rearing (AR and (b traditional rearing (TR was assessed on the basis of fatty acids profile of intramuscular fat (IMF. Lambs from AR in comparison with TR were of lower quality as assessed on the basis of fatty acids (FAs profile. The content of conjugated linolic acid (CLA in the fat of TR lambs was severalfold higher (0.749 vs. 0.193 g.100g-1 FAME, P<0.001 than in AR lambs. Similarly, the content of trans-vaccenic (TVA, á-linolenic (ALA, rumenic (RA, eicosapentaenoic (EPA and docosahexaenoic acid (DHA was in TR lambs significantly higher (P<0.001 than in AR lambs (0.955 vs. 0.111; 0.715 vs. 0.251; 0.672 vs. 0.148; 0.352 vs. 0.061; 0.252 vs. 0.079 g.100g-1 FAME. In contrary, the content of linoleic acid (LA, the ratio of LA/ALA and n-6/n-3 in AR lambs was higher than in TR lambs (9.07 vs. 4.81 g.100 g-1 FAME; 39.11 vs. 6.80; 14.56 vs. 3.25, P<0.001. In TR lambs the content of n-3 PUFA and BCFA was significantly higher (P<0.001 than in AR lambs (2.08 vs. 0.84 and 1.95 vs. 0.45. The value of thrombogenic index was higher in AR lambs in comparison with TR lambs (1.44 vs. 1.31; P<0.05. Significant differences between FAs of IMF of ram lambs and ewe lambs were observed only in the case of arachidonic acid (P<0.05.

Comparison of six crossbred lamb types: sensory, physical and nutritional meat quality characteristics.

Science.gov (United States)

Hoffman, L C; Muller, M; Cloete, S W P; Schmidt, D

2003-12-01

The effect of crossbreeding on lamb meat quality was examined on the M. longissimus dorsi and M. semimembranosus of South African lamb breed combinations. The lambs were sired by Dormer (D) and Suffolk (S) rams and born to Merino (M), Dohne Merino (DM) and SA Mutton Merino (SAMM) ewes to give six breed combinations. Ratings of sensory attributes on the M. semimembranosus of the different lamb breed combinations were obtained from a trained descriptive panel. The moisture, total lipids, protein, ash, mineral content and fatty acid composition of the M. semimembranosus were also obtained. Physical parameters measured on the M. longissimus dorsi were: pH(48), drip loss, cooking loss and Warner-Bratzler shear force (WBS). Breed did not have a significant effect (P>0.05) on the sensory quality of lamb, except for D×SAMM lambs which only showed a significantly higher (P⩽0.05) initial juiciness compared to S×M. However, breed had a significant effect on pH(48), WBS, protein content and the fatty acid and mineral composition.

7 CFR 59.303 - Mandatory reporting of lamb carcasses and boxed lamb.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Mandatory reporting of lamb carcasses and boxed lamb... INSPECTION ACT (CONTINUED) LIVESTOCK MANDATORY REPORTING Lamb Reporting § 59.303 Mandatory reporting of lamb carcasses and boxed lamb. (a) Daily reporting of lamb carcass transactions. The corporate officers or...

Precise optical Lamb shift measurements in atomic hydrogen

International Nuclear Information System (INIS)

Weitz, M.; Schmidt-Kaler, F.; Haensch, T.W.

1992-01-01

The 1S ground-state Lamb shift in atomic hydrogen has been measured to an accuracy of 1.3 parts in 10 5 by directly comparing the optical frequencies of the 1S-2S and the 2S-4S,4D two-photon transitions. The result, 8172.82(11) MHz, agrees with the theoretical prediction of 8172.94(9) MHz and rivals measurements of the 2S Lamb shift as a test of QED for a bound system. A comparison of the 2S-4S and 2S-4D intervals yields a 4S Lamb shift of 131.66(4) MHz

Study on the application of shear-wave elastography to thin-layered media and tubular structure: Finite-element analysis and experiment verification

Science.gov (United States)

Jang, Jun-keun; Kondo, Kengo; Namita, Takeshi; Yamakawa, Makoto; Shiina, Tsuyoshi

2016-07-01

Shear-wave elastography (SWE) enables the noninvasive and quantitative evaluation of the mechanical properties of human soft tissue. Generally, shear-wave velocity (C S) can be estimated using the time-of-flight (TOF) method. Young’s modulus is then calculated directly from the estimated C S. However, because shear waves in thin-layered media propagate as guided waves, C S cannot be accurately estimated using the conventional TOF method. Leaky Lamb dispersion analysis (LLDA) has recently been proposed to overcome this problem. In this study, we performed both experimental and finite-element (FE) analyses to evaluate the advantages of LLDA over TOF. In FE analysis, we investigated why the conventional TOF is ineffective for thin-layered media. In phantom experiments, C S results estimated using the two methods were compared for 1.5 and 2% agar plates and tube phantoms. Furthermore, it was shown that Lamb waves can be applied to tubular structures by extracting lateral waves traveling in the long axis direction of the tube using a two-dimensional window. Also, the effects of the inner radius and stiffness (or shear wavelength) of the tube on the estimation performance of LLDA were experimentally discussed. In phantom experiments, the results indicated good agreement between LLDA (plate phantoms of 2 mm thickness: 5.0 m/s for 1.5% agar and 7.2 m/s for 2% agar; tube phantoms with 2 mm thickness and 2 mm inner radius: 5.1 m/s for 1.5% agar and 7.0 m/s for 2% agar; tube phantoms with 2 mm thickness and 4 mm inner radius: 5.3 m/s for 1.5% agar and 7.3 m/s for 2% agar) and SWE measurements (bulk phantoms: 5.3 m/s ± 0.27 for 1.5% agar and 7.3 m/s ± 0.54 for 2% agar).

S wave Kπ scattering and effects of κ in J/ψ->K-bar *0(892)K+π-

International Nuclear Information System (INIS)

Guo, F.-K.; Ping, R.-G.; Shen, P.-N.; Chiang, H.-C.; Zou, B.-S.

2006-01-01

Kπ S wave scattering is studied using a chiral unitary approach (ChUT) taking into account coupled channels. With the amplitudes derived from the lowest order chiral Lagrangian as the kernel of a set of coupled channel Bathe-Salpeter equations, the I=1/2S wave Kπ scattering phase shifts below 1.2 GeV can be fitted by one parameter, a subtraction constant, and a scalar resonance corresponding to the controversial κ (K 0 *(800)) can be generated dynamically. A good description of the I=3/2S wave Kπ scattering phase shifts below 1.2 GeV can also be obtained. An artificial singularity in the cut-off method of the 2-meson loop integral of the ChUT is found. The formalism is applied to deal with the S wave Kπ final state interaction (FSI) in the decay J/ψ->K-bar * 0 (892)K + π - , and a qualitatively good fit to the data is achieved. The role of κ in the decay is discussed

The power flow angle of acoustic waves in thin piezoelectric plates.

Science.gov (United States)

Kuznetsova, Iren E; Zaitsev, Boris D; Teplykh, Andrei A; Joshi, Shrinivas G; Kuznetsova, Anastasia S

2008-09-01

The curves of slowness and power flow angle (PFA) of quasi-antisymmetric (A(0)) and quasi-symmetric (S(0)) Lamb waves as well as quasi-shear-horizontal (SH(0)) acoustic waves in thin plates of lithium niobate and potassium niobate of X-,Y-, and Z-cuts for various propagation directions and the influence of electrical shorting of one plate surface on these curves and PFA have been theoretically investigated. It has been found that the group velocity of such waves does not coincide with the phase velocity for the most directions of propagation. It has been also shown that S(0) and SH(0) wave are characterized by record high values of PFA and its change due to electrical shorting of the plate surface in comparison with surface and bulk acoustic waves in the same material. The most interesting results have been verified by experiment. As a whole, the results obtained may be useful for development of various devices for signal processing, for example, electrically controlled acoustic switchers.

Sodium chlorate reduces presence of Escherichia coli in feces of lambs and ewes managed in shed-lambing systems

Science.gov (United States)

Our objective was to establish doses of orally-administered NaClO3 that reduced presence of generic Escherichia coli in intestines of ewes and neonatal lambs managed in a shed-lambing system. Neonatal lambs (n = 32; age = 7.1 ± 1.2 d; BW = 6.8 ± 1.0 kg) and yearling ewes (n = 44; BW = 74.8 ± 5.6 kg)...

Determination of the two-loop Lamb shift in lithiumlike bismuth

International Nuclear Information System (INIS)

Sapirstein, J.; Cheng, K. T.

2001-01-01

The energy levels of lithiumlike bismuth are shown to be accurately described in a representation-independent manner when all diagrams involving one and two photons, with the exception of the two-loop Lamb shift, are evaluated. Comparison with the experimental value of the 2p 3/2 -2s 1/2 splitting then shows that, assuming three-photon effects are negligible, the contribution of the two-loop Lamb shift is 0.175(39) eV

Effects of Housing Systems and the Diet Supplements on the Slaughter Value and Concentration of Mineral Elements in the Loin Muscle of Lambs

Directory of Open Access Journals (Sweden)

M. Gabryszuk

2014-05-01

Full Text Available The objective of this study was to investigate the effect of maintenance system as well as the effect of Se, Zn, and vitamin E supplementation of ram-lambs on the slaughter value and concentration of mineral elements in the loin muscle of lambs. The experiment was conducted on 72 Polish Merino ram-lambs divided into three groups: group C, indoor with no supplement, 19 lambs; S, indoor with supplement, 23 lambs; G, outdoor with no supplement, 30 lambs. From birth all the lambs were maintained indoor with their dams and then weaned at the age of 8 weeks. The rams from group C and S were placed in individual straw-bedded pens and fattened individually with concentrate mixture offered ad libitum until the age of 16 weeks. The lambs from group G were grazed every day from May to July (2 months. During the fattening period each lamb from the supplemented group S was administered per os 1 mL 0.1% Na2SeO4 (Se, 0.42 mg, 3 mL 10% ZnSO4 (Zn, 68 mg, and 1 mL premix protect vitamin E (0.1 g α-tocopherol, 5 mg lysine, 5 mg methionine daily. A comparison of half carcasses across the groups has shown no difference between the control group and the one with supplements, while the weight of half carcasses in the grazing group was smaller in comparison with groups C and S (p<0.001. The meat content in the pelvic limb showed no differences across all groups under study. The pelvic limb of grazing lambs contained less fat compared to the control and supplemented groups (p<0.001. The concentrations of Se and Zn in the blood plasma of ram-lambs from the supplemented group were significantly higher than for the control and grazing lambs. Inorganic Se and Zn supplementation with vitamin E to the diet of lambs increased Se and Zn levels in loin muscle (p<0.001 to 0.46 μg/g and 32.9 μg/g in fresh tissue, respectively.

The Lamb-shift experiment in Muonic helium

Energy Technology Data Exchange (ETDEWEB)

Nebel, T., E-mail: tbn@mpq.mpg.de [Max-Planck-Institut fuer Quantenoptik (Germany); Amaro, F. D. [Universidade de Coimbra, Departamento de Fisica (Portugal); Antognini, A. [Eidgenoessische Technische Hochschule Zuerich, Institut fuer Teilchenphysik (Switzerland); Biraben, F. [CNRS and Universite P. et M. Curie, Laboratoire Kastler Brossel, Ecole Normale Superieure (France); Cardoso, J. M. R. [Universidade de Coimbra, Departamento de Fisica (Portugal); Covita, D. S. [Universidade de Aveiro, I3N, Departamento de Fisica (Portugal); Dax, A. [University of Tokyo, Department of Physics (Japan); Fernandes, L. M. P.; Gouvea, A. L. [Universidade de Coimbra, Departamento de Fisica (Portugal); Graf, T. [Universitaet Stuttgart, Institut fuer Strahlwerkzeuge (Germany); Haensch, T. W. [Max-Planck-Institut fuer Quantenoptik (Germany); Hildebrandt, M. [Paul Scherrer Institut (Switzerland); Indelicato, P.; Julien, L. [CNRS and Universite P. et M. Curie, Laboratoire Kastler Brossel, Ecole Normale Superieure (France); Kirch, K.; Kottmann, F. [Eidgenoessische Technische Hochschule Zuerich, Institut fuer Teilchenphysik (Switzerland); Liu, Y.-W. [National Tsing Hua University, Physics Department (China); Monteiro, C. M. B. [Universidade de Coimbra, Departamento de Fisica (Portugal); and others

2012-12-15

We propose to measure several transition frequencies between the 2S and the 2P states (Lamb shift) in muonic helium ions ({mu}{sup 4}He{sup + } and {mu}{sup 3}He{sup + }) by means of laser spectroscopy, in order to determine the alpha-particle and helion root-mean-square (rms) charge radius. In addition, the fine and hyperfine structure components will be revealed, and the magnetic moment distribution radius will be determined. The contribution of the finite size effect to the Lamb shift (2S - 2P energy difference) in {mu}He{sup + } is as high as 20 %. Therefore a measurement of the transition frequencies with a moderate (for laser spectroscopy) precision of 50 ppm (corresponding to 1/20 of the linewidth) will lead to a determination of the nuclear rms charge radii with a relative accuracy of 3 Multiplication-Sign 10{sup - 4} (equivalent to 0.0005 fm). The limiting factor for the extraction of the radii from the Lamb shift measurements is given by the uncertainty of the nuclear polarizability contribution. Combined with an ongoing experiment at MPQ aiming to measure the 1S - 2S transition frequency in the helium ion, the Lamb shift measurement in {mu}He{sup + } will lead to a sensitive test of problematic and challenging bound-state QED terms. This measurement will also help to clarify the discrepancy found in our previous {mu}{sub p} experiment. Additionally, a precise knowledge of the absolute nuclear radii of the He isotopes and the hyperfine splitting of {mu}{sup 3}He{sup + } provide a relevant test of few-nucleon theories.

Lamb survival, glutathione redox state and immune function of neonates and lambs from periparturient Merino ewes supplemented with rumen-protected methionine.

Science.gov (United States)

Liu, Shimin; Lei, Jason; Hancock, Serina; Scanlan, Victoria; Broomfield, Steve; Currie, Andrew; Thompson, Andrew

2016-10-01

Wool growth in Merino sheep demands a high level of sulphur amino acids, competing with body growth and the immune system, which may play a role in increasing the risk of lamb mortality. The hypothesis that dietary supplementation of methionine (Met) to Merino ewes during the late stages of pregnancy will improve foetal growth and alter immune competency of ewes and lambs was tested in a total of 120 grazing, pregnant Merino ewes. Sixty ewes were group-supplemented with 6.3 g/d rumen-protected Met (Met-Plus) per sheep from day 111 of pregnancy until day 7 after lambing, and the other 60 animals were used as a non-supplemented Control. Lambs from Met-supplemented ewes tended to be 10% heavier than Control lambs (p = 0.10), which did not affected the survival rate at weaning significantly. The supplemented ewes had slightly higher concentrations of total glutathione (GSH) in plasma at lambing (p ewes was elevated at lambing (p ewes were undergoing increased oxidative stress. The Met supplementation elevated the total IgG concentration (p < 0.05) in lambs aged 4 and 6 weeks, but did not change the IgG concentrations in colostrum and in plasma of 1-week-old lambs, and white blood cell counts and leukocyte types. The trend towards higher lamb birth weights in the Met-supplemented group requires further investigation as this may influence survival at birth and weaning.

Estimation of Inbreeding Coefficient and Its Effects on Lamb Survival in Sheep

Directory of Open Access Journals (Sweden)

mohammad almasi

2016-04-01

lamb added to models as a covariate. The most appropriate model for this trait was determined by Akaike’s Information Criterion (AIC test. Results and Discussion The number of survival records for Baluchi, Iranblack, Makoei and Zandi sheep breeds were 10793, 4826, 3588 and 6140, respectively. The inbred individuals were 17.63, 58.25, 4.88 and 36.32 per cent for Baluchi, Iranblack, Makoei and Zandi sheep, respectively, (2473, 3620, 175 and 2230 head respectively. The mean of inbreeding coefficient for whole and inbred populations for Baluchi lambs were 0.66 and 3.73 per cent, respectively, for Iranblack lambs were 4.59 and 7.90 per cent, respectively, for Makoei lambs were 0.25 and 4.86 per cent, respectively and for Zandi lambs were 1.22 and 3.61 per cent, respectively. Maximum of inbreeding coefficient for Baluchi, Iranblack, Makoei and Zandi lambs was 31.25, 34.70, 25.00 and 31.35 per cent, respectively. The mean of lamb survival in Whole and inbred population for Baluchi lambs were 89.11 and 88.30 per cent, respectively, for Iranblack lambs were 84.44 and 83.84 per cent, respectively, for Makoei lambs were 90.40 and 86.95 per cent, respectively and for Zandi lambs were 87.37 and 86.90 per cent, respectively. The average of inbreeding coefficient for 4 breeds was increased. The estimation of positive inbreeding coefficient trend for Baluchi, Iranblack, Makoei and Zandi were 0.035±0.012, 0.31±0.03, 0.010±0.012 and 0.020±0.012 per cent on each year, respectively. The most suitable model for survival in Baluchi, Iranblack, Makoei and Zandi breeds was 7, 12, 2 and 1, respectively. The regression coefficient of inbreeding on lamb survival were -0.26±0.11, -0.35±0.11, -0.25±1.83 and -0.04±0.20 per cent for Baluchi, Iranblack, Makoei and Zandi sheep, respectively. Conclusion The levels of inbreeding below 5% in whole population, or annual rates of inbreeding under 1% unlikely result in substantial reduction of performance and economic income in sheep production

Exact Closed-form Solutions for Lamb's Problem

Science.gov (United States)

Feng, X.

2017-12-01

In this work, we report on an exact closedform solution for the displacement at the surfaceof an elastic halfspace elicited by a buried point source that acts at some point underneath thatsurface. This is commonly referred to as the 3D Lamb's problem, for which previous solutionswere restricted to sources and receivers placed at the free surface. By means of the reciprocitytheorem, our solution should also be valid as a means to obtain the displacements at interior pointswhen the source is placed at the free surface. We manage to obtain explicit results by expressingthe solution in terms of elementary algebraic expression as well as elliptic integrals. We anchorour developments on Poissons ratio 0.25 starting from Johnson's numerical, integral transformsolutions. Furthermore, the spatial derivatives of our solutions can be easily acquired in termsof our methods. In the end, our closed-form results agree perfectly with the numerical results ofJohnson, which strongly conrms the correctness of our explicit formulas. It is hoped that in duetime, these formulas may constitute a valuable canonical solution that will serve as a yardstickagainst which other numerical solutions can be compared and measured.In addition, we abstract some terms from our solutions as the generator of the Rayleigh waves.Some basic properties of the Rayleigh waves in the time domain will be indicated in terms of thegenerator. The fareld radiation patterns of P-wave and S-wave elicited by the double-couple forcein the uniform half-space medium could also be acquired from our results.

No rotating U.S. Testing of thin walled tubes

International Nuclear Information System (INIS)

Furlan, J.; Boulanger, G.; Mogavero, R.

1981-07-01

Thin walled tube ultrasonic testing is performed, with Lamb waves, using annular transducers and conical or helicoidal mirrors. The main advantage of this already known system is dispensing with rotation of tube and/or transducer. High speed control (30 cm/s and more) is then allowed. The present paper describes the parameters influencing the sensitivity has been improved by searching, theoretically and practically, the best suited Lamb wave modes, and by using transducers which are well characterized. Practical example of cladding tube U.S. testing is described

Measurements of the S-wave fraction in B-0 -> K+ pi(-) mu(+) mu(-) decays and the B-0 -> K*(892)(0) mu(+) mu(-) differential branching fraction

NARCIS (Netherlands)

Aaij, R.; Adeva, B.; Adinolfi, M.; Ajaltouni, Z.; Akar, S.; Albrecht, J.; Alessio, F.; Alexander, M.; Ali, S.; Alkhazov, G.; Cartelle, P. Alvarez; Alves, A. A.; Amato, S.; Amerio, S.; Amhis, Y.; An, L.; Anderlini, L.; Andreassi, G.; Andreotti, M.; Andrews, J. E.; Appleby, R. B.; Gutierrez, O. Aquines; Archilli, F.; d'Argent, P.; Artamonov, A.; Artuso, M.; Aslanides, E.; Auriemma, G.; Baalouch, M.; Bachmann, S.; Back, J. J.; Badalov, A.; Baesso, C.; Baldini, W.; Barlow, R. J.; Barschel, C.; Barsuk, S.; Barter, W.; Batozskaya, V.; Battista, V.; Beaucourt, L.; Beddow, J.; Bedeschi, F.; Bediaga, I.; Bel, L. J.; Bellee, V.; Dufour, L.; Onderwater, C. J. G.; Pellegrino, A.; Tolk, S.

2016-01-01

A measurement of the differential branching fraction of the decay B-0 -> K* (892)(0) mu(+)mu(-) is presented together with a determination of the S-wave fraction of the K+ pi(-) system in the decay B-0 -> K+ pi-mu(+)mu(-). The analysis is based on pp-collision data corresponding to an integrated

Factors affecting fecal egg counts in periparturient Katahdin ewes and their lambs.

Science.gov (United States)

Notter, D R; Burke, J M; Miller, J E; Morgan, J L M

2017-01-01

Selection for low fecal egg counts (FEC) can be used to genetically enhance resistance to gastrointestinal nematode parasites in growing lambs, thereby reducing the frequency of use of anthelmintics, facilitating marketing of organic lamb, and reducing the risk of development of anthelmintic resistance by the parasite. Recording of FEC in lambs has, therefore, been incorporated into several national sheep genetic evaluation programs. Ewes in late gestation and early lactation are also vulnerable to parasite infection and commonly experience a periparturient rise in FEC. This study was designed to assess factors associated with the periparturient rise in FEC in Katahdin ewes and associated changes in FEC in their lambs. Data came from 1,487 lambings by 931 Katahdin ewes from 11 farms in the Eastern United States. Fecal egg counts were measured in ewes at approximately 0, 30, and 60 d postpartum and in their lambs at approximately 60, 90, and 120 d of age. Approximately 1,400 lambs were evaluated at each measurement age. Data were analyzed separately for ewes and lambs and also initially analyzed separately for each measurement time. Repeated-measures analyses were then used to evaluate responses across measurement times. In ewes, FEC peaked at approximately 28 d postpartum, and we concluded that informative periparturient FEC could be obtained from 1 wk before until approximately 5 wk after lambing. Yearling ewes had higher FEC than adult ewes ( ewes that nursed twin or triplet lambs had higher FEC than ewes that nursed single lambs ( ewes and lambs nursed in larger litters were, like their dams, at greater risk of parasitism ( Ewes and lambs in these groups would benefit from enhanced monitoring of parasite loads at lambing and in early lactation. Correlations () between FEC in lambs at 90 d of age and FEC in ewes at 0, 30, and 60 d postpartum of 0.05 to 0.09 ( ≤ 0.05) support the presence of a genetic relationship between these 2 indicators of parasite

Enhancement of Lamb Wave Imaging Resolution by Step Pulse Excitation and Prewarping

Directory of Open Access Journals (Sweden)

Shangchen Fu

2015-01-01

Full Text Available For the purpose of improving the damage localization accuracy, a prewarping technology is combined with step pulse excitation and this method is used in Lamb wave imaging of plate structures with adjacent damages. Based on the step pulse excitation, various narrowband or burst response can be derived by signal processing technology and this method provides flexibility for further prewarping approach. A narrowband signal warped with a preselected distance is then designed, and the dispersion in the response of this prewarping signal will be greatly reduced. However, in order to calculate the distance for prewarping, the first arrival needs to be estimated from the burst response. From the step-pulse response, narrowband responses at different central frequencies can be obtained, and by averaging peak-value time of their first arrivals, a more accurate estimation can be calculated. By using the prewarping method to the damage scattering signals before imaging, the imaging resolution of the delay-and-sum method can be highly enhanced. The experiment carried out in an aluminum plate with adjacent damages proves the efficiency of this method.

Characterization of the human laminin beta2 chain locus (LAMB2): linkage to a gene containing a nonprocessed, transcribed LAMB2-like pseudogene (LAMB2L) and to the gene encoding glutaminyl tRNA synthetase (QARS)

DEFF Research Database (Denmark)

Durkin, M E; Jäger, A C; Khurana, T S

1999-01-01

The laminin beta2 chain is an important constituent of certain kidney and muscle basement membranes. We have generated a detailed physical map of a 110-kb genomic DNA segment surrounding the human laminin beta2 chain gene (LAMB2) on chromosome 3p21.3-->p21.2, a region paralogous with the chromosome...... 7q22-->q31 region that contains the laminin beta1 chain gene locus (LAMB1). Several CpG islands and a novel polymorphic microsatellite marker (D3S4594) were identified. The 3' end of LAMB2 lies 16 kb from the 5' end of the glutaminyl tRNA synthetase gene (QARS). About 20 kb upstream of LAMB2 we...... found a gene encoding a transcribed, non-processed LAMB2-like pseudogene (LAMB2L). The sequence of 1.75 kb of genomic DNA at the 3' end of LAMB2L was similar to exons 8-12 of the laminin beta2 chain gene. The LAMB2L-LAMB2-QARS cluster lies telomeric to the gene encoding the laminin-binding protein...

Smart Sound Processing for Defect Sizing in Pipelines Using EMAT Actuator Based Multi-Frequency Lamb Waves

Directory of Open Access Journals (Sweden)

Joaquín García-Gómez

2018-03-01

Full Text Available Pipeline inspection is a topic of particular interest to the companies. Especially important is the defect sizing, which allows them to avoid subsequent costly repairs in their equipment. A solution for this issue is using ultrasonic waves sensed through Electro-Magnetic Acoustic Transducer (EMAT actuators. The main advantage of this technology is the absence of the need to have direct contact with the surface of the material under investigation, which must be a conductive one. Specifically interesting is the meander-line-coil based Lamb wave generation, since the directivity of the waves allows a study based in the circumferential wrap-around received signal. However, the variety of defect sizes changes the behavior of the signal when it passes through the pipeline. Because of that, it is necessary to apply advanced techniques based on Smart Sound Processing (SSP. These methods involve extracting useful information from the signals sensed with EMAT at different frequencies to obtain nonlinear estimations of the depth of the defect, and to select the features that better estimate the profile of the pipeline. The proposed technique has been tested using both simulated and real signals in steel pipelines, obtaining good results in terms of Root Mean Square Error (RMSE.

Smart Sound Processing for Defect Sizing in Pipelines Using EMAT Actuator Based Multi-Frequency Lamb Waves.

Science.gov (United States)

García-Gómez, Joaquín; Gil-Pita, Roberto; Rosa-Zurera, Manuel; Romero-Camacho, Antonio; Jiménez-Garrido, Jesús Antonio; García-Benavides, Víctor

2018-03-07

Pipeline inspection is a topic of particular interest to the companies. Especially important is the defect sizing, which allows them to avoid subsequent costly repairs in their equipment. A solution for this issue is using ultrasonic waves sensed through Electro-Magnetic Acoustic Transducer (EMAT) actuators. The main advantage of this technology is the absence of the need to have direct contact with the surface of the material under investigation, which must be a conductive one. Specifically interesting is the meander-line-coil based Lamb wave generation, since the directivity of the waves allows a study based in the circumferential wrap-around received signal. However, the variety of defect sizes changes the behavior of the signal when it passes through the pipeline. Because of that, it is necessary to apply advanced techniques based on Smart Sound Processing (SSP). These methods involve extracting useful information from the signals sensed with EMAT at different frequencies to obtain nonlinear estimations of the depth of the defect, and to select the features that better estimate the profile of the pipeline. The proposed technique has been tested using both simulated and real signals in steel pipelines, obtaining good results in terms of Root Mean Square Error (RMSE).

The S-wave resonance contributions in the B{sup 0}{sub s} decays into ψ(2S,3S) plus pion pair

Energy Technology Data Exchange (ETDEWEB)

Rui, Zhou [North China University of Science and Technology, College of Sciences, Tangshan (China); Li, Ya [Nanjing Normal University, Department of Physics and Institute of Theoretical Physics, Nanjing, Jiangsu (China); Wang, Wen-Fei [Shanxi University, Institute of Theoretical Physics, Taiyuan, Shanxi (China)

2017-03-15

The three-body decays B{sup 0}{sub s} → ψ(2S,3S)π{sup +}π{sup -} are studied based on the perturbative QCD approach. With the help of the nonperturbative two-pion distribution amplitudes, the analysis is simplified into the quasi-two-body processes. Besides the traditional factorizable and nonfactorizable diagrams at the leading order, the next-to-leading order vertex corrections are also included to cancel the scale dependence. The f{sub 0}(980), f{sub 0}(1500) resonance contributions as well as the nonresonant contributions are taken into account using the presently known ππ time-like scalar form factor for the s anti s component. It is found that the predicted B{sup 0}{sub s} → ψ(2S)π{sup +}π{sup -} decay spectra in the pion pair invariant mass shows a similar behavior as the experiment. The calculated S-wave contributions to the branching ratio of B{sup 0}{sub s} → ψ(2S)π{sup +}π{sup -} is 6.0 x 10{sup -5}, which is in agreement with the LHCb data B(B{sup 0}{sub s} → ψ(2S)π{sup +}π{sup -}) = (7.2±1.2) x 10{sup -5} within errors. The estimate of B(B{sup 0}{sub s} → ψ(3S)π{sup +}π{sup -}) can reach the order of 10{sup -5}, pending the corresponding measurements. (orig.)

Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

Directory of Open Access Journals (Sweden)

C. Raineri

2015-08-01

Full Text Available Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i costs composition, and ii cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

Modeling the high-frequency complex modulus of silicone rubber using standing Lamb waves and an inverse finite element method.

Science.gov (United States)

Jonsson, Ulf; Lindahl, Olof; Andersson, Britt

2014-12-01

To gain an understanding of the high-frequency elastic properties of silicone rubber, a finite element model of a cylindrical piezoelectric element, in contact with a silicone rubber disk, was constructed. The frequency-dependent elastic modulus of the silicone rubber was modeled by a fourparameter fractional derivative viscoelastic model in the 100 to 250 kHz frequency range. The calculations were carried out in the range of the first radial resonance frequency of the sensor. At the resonance, the hyperelastic effect of the silicone rubber was modeled by a hyperelastic compensating function. The calculated response was matched to the measured response by using the transitional peaks in the impedance spectrum that originates from the switching of standing Lamb wave modes in the silicone rubber. To validate the results, the impedance responses of three 5-mm-thick silicone rubber disks, with different radial lengths, were measured. The calculated and measured transitional frequencies have been compared in detail. The comparison showed very good agreement, with average relative differences of 0.7%, 0.6%, and 0.7% for the silicone rubber samples with radial lengths of 38.0, 21.4, and 11.0 mm, respectively. The average complex elastic moduli of the samples were (0.97 + 0.009i) GPa at 100 kHz and (0.97 + 0.005i) GPa at 250 kHz.

Mineral requirements for growth of wool and hair lambs

Directory of Open Access Journals (Sweden)

Izabelle Auxiliadora Molina de Almeida Teixeira

2013-05-01

Full Text Available The present study was conducted to determine the body composition and the mineral requirements for growth of wool and hair lambs. A total of 34 castrated lambs with an initial body weight (BW of 19.9±0.8 kg were used; 17 of these lambs were of the genotype Ideal × Ile de France and 17 were Santa Inês. Ten lambs (5 of each genotype were slaughtered at the beginning of the experiment to establish their initial body composition. The remaining lambs were assigned to one of three diets (40% roughage and 60% concentrate, 60% roughage and 40% concentrate, or 80% roughage and 20% concentrate in a 2 × 3 factorial arrangement of treatments. All of the diets were provided ad libitum. When the group under 40% roughage and 60% concentrate reached 35 kg BW, all of the animals were slaughtered. Linear regressions were used to determine the relationship between the shrunk BW and the empty body weight (EBW for each genotype. These equations were compared and revealed differences between the genotypes. The allometric equations were calculated using the relationship between the amount of minerals and the EBW. The equations of a given mineral for each genotype were compared to verify if they were statistically different. The equations for calcium, phosphorus, magnesium and sodium differed between genotypes. The same equations were used to estimate the major body mineral composition per kilogram of EBW. The net requirement for gain of the fleece-free Ideal × Ile de France lambs ranged from 7.77 to 6.80 g Ca, 4.54 to 4.14 g P, 0.30 to 0.27 g Mg, 1.18 to 1.07 g K and 0.84 to 0.76 g Na per kg BW gain, and the requirements of the Santa Inês animals ranged from 9.57 to 8.37 g Ca, 5.39 to 4.91 g P, 0.36 to 0.33 g Mg, 1.18 to 1.07 g K and 0.90 to 0.81 g Na per kg BW gain for the lambs weighting 20 to 35 kg. Santa Inês lambs showed higher requirements for Ca, P, Mg and Na.

7 CFR 1280.111 - Lamb.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb. 1280.111 Section 1280.111 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.111 Lamb. Lamb means...

Lamb meat colour stability as affected by dietary tannins

Directory of Open Access Journals (Sweden)

Pietro Pennisi

2010-01-01

Full Text Available Twenty-one male Comisana lambs were divided into three groups at 45 days of age and were individually penned for 60 days. Seven lambs were fed a concentrate-based diet (C, seven lambs received the same concentrate with the addiction of tannins from quebracho (Schinopsis lorentzii; T, whereas the remaining animals were fed exclusively fresh vetch (Vicia sativa; H. Colour descriptors (a*, b* and H* and metmyoglobin (MMb percentages were measured on minced semimembranosus muscle over 14 days of refrigerated storage in a high oxygen atmosphere. Regardless of dietary treatment, meat redness decreased, while yellowness and hue angle increased (P < 0.001 over storage duration. However, higher a* values, lower b* values and lower H* values were observed in meat from both H- and T-fed animals as compared to meat from C-fed lambs (P = 0.012; P = 0.02; P = 0.003, respectively. Metmyoglobin formation increased over time (P < 0.001, but H diet resulted in lower metmyoglobin percentages than C diet (P = 0.007. We conclude that the inclusion of tannins into the concentrate improved meat colour stability compared to a tannin-free concentrate. Moreover, the protective effect of tannins against meat discolouration was comparable to that obtained by feeding lambs fresh herbage.

Measurements of the S-wave fraction in $B^{0}\\rightarrow K^{+}\\pi^{-}\\mu^{+}\\mu^{-}$ decays and the $B^{0}\\rightarrow K^{\\ast}(892)^{0}\\mu^{+}\\mu^{-}$ differential branching fraction

CERN Document Server

Aaij, Roel; Adinolfi, Marco; Ajaltouni, Ziad; Akar, Simon; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio Augusto; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Andreassi, Guido; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; d'Argent, Philippe; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Bachmann, Sebastian; Back, John; Badalov, Alexey; Baesso, Clarissa; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Battista, Vincenzo; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Bel, Lennaert; Bellee, Violaine; Belloli, Nicoletta; Belous, Konstantin; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bertolin, Alessandro; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bifani, Simone; Billoir, Pierre; Bird, Thomas; Birnkraut, Alex; Bitadze, Alexander; Bizzeti, Andrea; Blake, Thomas; Blanc, Frederic; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Boettcher, Thomas; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borghi, Silvia; Borisyak, Maxim; Borsato, Martino; Bossu, Francesco; Boubdir, Meriem; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Braun, Svende; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Buchanan, Emma; Burr, Christopher; Bursche, Albert; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Campana, Pierluigi; Campora Perez, Daniel; Capriotti, Lorenzo; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carniti, Paolo; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cavallero, Giovanni; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chatzikonstantinidis, Georgios; Chefdeville, Maximilien; Chen, Shanzhen; Cheung, Shu-Faye; Chobanova, Veronika; Chrzaszcz, Marcin; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Cogoni, Violetta; Cojocariu, Lucian; Collazuol, Gianmaria; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Crocombe, Andrew; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dall'Occo, Elena; Dalseno, Jeremy; David, Pieter; Davis, Adam; De Aguiar Francisco, Oscar; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Simone, Patrizia; Dean, Cameron Thomas; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Demmer, Moritz; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Dey, Biplab; Di Canto, Angelo; Dijkstra, Hans; Dordei, Francesca; Dorigo, Mirco; Dosil Suárez, Alvaro; Dovbnya, Anatoliy; Dreimanis, Karlis; Dufour, Laurent; Dujany, Giulio; Dungs, Kevin; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; Déléage, Nicolas; Easo, Sajan; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Hannah Mary; Evans, Timothy; Falabella, Antonio; Farley, Nathanael; Farry, Stephen; Fay, Robert; Ferguson, Dianne; Fernandez Albor, Victor; Ferrari, Fabio; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fleuret, Frederic; Fohl, Klaus; Fontana, Marianna; Fontanelli, Flavio; Forshaw, Dean Charles; Forty, Roger; Frank, Markus; Frei, Christoph; Frosini, Maddalena; Fu, Jinlin; Furfaro, Emiliano; Färber, Christian; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; García Pardiñas, Julián; Garra Tico, Jordi; Garrido, Lluis; Garsed, Philip John; Gascon, David; Gaspar, Clara; Gavardi, Laura; Gazzoni, Giulio; Gerick, David; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gianì, Sebastiana; Gibson, Valerie; Girard, Olivier Göran; Giubega, Lavinia-Helena; Gizdov, Konstantin; Gligorov, V.V.; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gorelov, Igor Vladimirovich; Gotti, Claudio; Grabalosa Gándara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graverini, Elena; Graziani, Giacomo; Grecu, Alexandru; Griffith, Peter; Grillo, Lucia; Grünberg, Oliver; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; Göbel, Carla; Hadavizadeh, Thomas; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; He, Jibo; Head, Timothy; Heister, Arno; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adlène; Hill, Donal; Hombach, Christoph; Hulsbergen, Wouter; Humair, Thibaud; Hushchyn, Mikhail; Hussain, Nazim; Hutchcroft, David; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jawahery, Abolhassan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Karbach, Moritz; Karodia, Sarah; Kecke, Matthieu; Kelsey, Matthew; Kenyon, Ian; Kenzie, Matthew; Ketel, Tjeerd; Khairullin, Egor; Khanji, Basem; Khurewathanakul, Chitsanu; Kirn, Thomas; Klaver, Suzanne; Klimaszewski, Konrad; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Kozachuk, Anastasiia; Kozeiha, Mohamad; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krokovny, Pavel; Kruse, Florian; Krzemien, Wojciech; Kucewicz, Wojciech; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kuonen, Axel Kevin; Kurek, Krzysztof; Kvaratskheliya, Tengiz; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Leflat, Alexander; Lefrançois, Jacques; Lefèvre, Regis; Lemaitre, Florian; Lemos Cid, Edgar; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Likhomanenko, Tatiana; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Liu, Xuesong; Loh, David; Longstaff, Iain; Lopes, Jose; Lucchesi, Donatella; Lucio Martinez, Miriam; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Lusiani, Alberto; Lyu, Xiao-Rui; Machefert, Frederic; Maciuc, Florin; Maev, Oleg; Maguire, Kevin; Malde, Sneha; Malinin, Alexander; Maltsev, Timofei; Manca, Giulia; Mancinelli, Giampiero; Manning, Peter Michael; Maratas, Jan; Marchand, Jean François; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Marks, Jörg; Martellotti, Giuseppe; Martin, Morgan; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massacrier, Laure Marie; Massafferri, André; Matev, Rosen; Mathad, Abhijit; Mathe, Zoltan; Matteuzzi, Clara; Mauri, Andrea; Maurin, Brice; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; Meadows, Brian; Meier, Frank; Meissner, Marco; Melnychuk, Dmytro; Merk, Marcel; Michielin, Emanuele; Milanes, Diego Alejandro; Minard, Marie-Noelle; Mitzel, Dominik Stefan; Molina Rodriguez, Josue; Monroy, Ignacio Alberto; Monteil, Stephane; Morandin, Mauro; Morawski, Piotr; Mordà, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Mulder, Mick; Mussini, Manuel; Müller, Dominik; Müller, Janine; Müller, Katharina; Müller, Vanessa; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nandi, Anita; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen-Mau, Chung; Niess, Valentin; Nieswand, Simon; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Novoselov, Alexey; O'Hanlon, Daniel Patrick; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Ogilvy, Stephen; Oldeman, Rudolf; Onderwater, Gerco; Otalora Goicochea, Juan Martin; Otto, Adam; Owen, Patrick; Oyanguren, Maria Aranzazu; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Pappalardo, Luciano; Pappenheimer, Cheryl; Parker, William; Parkes, Christopher; Passaleva, Giovanni; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pearce, Alex; Pellegrino, Antonio; Penso, Gianni; Pepe Altarelli, Monica; Perazzini, Stefano; Perret, Pascal; Pescatore, Luca; Petridis, Konstantinos; Petrolini, Alessandro; Petrov, Aleksandr; Petruzzo, Marco; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pikies, Malgorzata; Pinci, Davide; Pistone, Alessandro; Piucci, Alessio; Playfer, Stephen; Plo Casasus, Maximo; Poikela, Tuomas; Polci, Francesco; Poluektov, Anton; Polyakov, Ivan; Polycarpo, Erica; Pomery, Gabriela Johanna; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, Cédric; Price, Eugenia; Price, Joseph David; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Quagliani, Renato; Rachwal, Bartolomiej; Rademacker, Jonas; Rama, Matteo; Ramos Pernas, Miguel; Rangel, Murilo; Raniuk, Iurii; Raven, Gerhard; Redi, Federico; Reichert, Stefanie; dos Reis, Alberto; Remon Alepuz, Clara; Renaudin, Victor; Ricciardi, Stefania; Richards, Sophie; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vicente; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Lopez, Jairo Alexis; Rodriguez Perez, Pablo; Rogozhnikov, Alexey; Roiser, Stefan; Romanovskiy, Vladimir; Romero Vidal, Antonio; Ronayne, John William; Rotondo, Marcello; Ruf, Thomas; Ruiz Valls, Pablo; Saborido Silva, Juan Jose; Sagidova, Naylya; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santimaria, Marco; Santovetti, Emanuele; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Saunders, Daniel Martin; Savrina, Darya; Schael, Stefan; Schellenberg, Margarete; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmelzer, Timon; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schubert, Konstantin; Schubiger, Maxime; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Semennikov, Alexander; Sergi, Antonino; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Siddi, Benedetto Gianluca; Silva Coutinho, Rafael; Silva de Oliveira, Luiz Gustavo; Simi, Gabriele; Sirendi, Marek; Skidmore, Nicola; Skwarnicki, Tomasz; Smith, Eluned; Smith, Iwan Thomas; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Spradlin, Patrick; Sridharan, Srikanth; Stagni, Federico; Stahl, Marian; Stahl, Sascha; Stefko, Pavol; Stefkova, Slavorima; Steinkamp, Olaf; Stenyakin, Oleg; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Syropoulos, Vasileios; Szczekowski, Marek; Szumlak, Tomasz; T'Jampens, Stephane; Tayduganov, Andrey; Tekampe, Tobias; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Tournefier, Edwige; Tourneur, Stephane; Trabelsi, Karim; Traill, Murdo; Tran, Minh Tâm; Tresch, Marco; Trisovic, Ana; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tuning, Niels; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vacca, Claudia; Vagnoni, Vincenzo; Valat, Sebastien; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vecchi, Stefania; van Veghel, Maarten; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Venkateswaran, Aravindhan; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Volkov, Vladimir; Vollhardt, Achim; Voneki, Balazs; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; de Vries, Jacco; Vázquez Sierra, Carlos; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wang, Jianchun; Ward, David; Watson, Nigel; Websdale, David; Weiden, Andreas; Whitehead, Mark; Wicht, Jean; Wilkinson, Guy; Wilkinson, Michael; Williams, Mark Richard James; Williams, Matthew; Williams, Mike; Williams, Timothy; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wraight, Kenneth; Wright, Simon; Wyllie, Kenneth; Xie, Yuehong; Xing, Zhou; Xu, Zhirui; Yang, Zhenwei; Yin, Hang; Yu, Jiesheng; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zarebski, Kristian Alexander; Zavertyaev, Mikhail; Zhang, Liming; Zhang, Yanxi; Zhang, Yu; Zhelezov, Alexey; Zheng, Yangheng; Zhokhov, Anatoly; Zhukov, Valery; Zucchelli, Stefano

2016-11-08

A measurement of the differential branching fraction of the decay ${B^{0}\\rightarrow K^{\\ast}(892)^{0}\\mu^{+}\\mu^{-}}$ is presented together with a determination of the S-wave fraction of the $K^+\\pi^-$ system in the decay $B^{0}\\rightarrow K^{+}\\pi^{-}\\mu^{+}\\mu^{-}$. The analysis is based on $pp$-collision data corresponding to an integrated luminosity of 3\\,fb$^{-1}$ collected with the LHCb experiment. The measurements are made in bins of the invariant mass squared of the dimuon system, $q^2$. Precise theoretical predictions for the differential branching fraction of $B^{0}\\rightarrow K^{\\ast}(892)^{0}\\mu^{+}\\mu^{-}$ decays are available for the $q^2$ region $1.10\\,{\\rm GeV}^2/c^4$. In this $q^2$ region, for the $K^+\\pi^-$ invariant mass range $796 < m_{K\\pi} < 996\\,{\\rm MeV}/c^2$, the S-wave fraction of the $K^+\\pi^-$ system in $B^{0}\\rightarrow K^{+}\\pi^{-}\\mu^{+}\\mu^{-}$ decays is found to be \\begin{equation*} F_{\\rm S} = 0.101\\pm0.017({\\rm stat})\\pm0.009 ({\\rm syst}), \\end{equation*}...

Consumer Perception of the Quality of Lamb and Lamb Confit.

Science.gov (United States)

Ripoll, Guillermo; Joy, Margalida; Panea, Begoña

2018-05-22

The patterns of food consumption in general and those of meat, in particular, are constantly changing. These changes are due not only to socioeconomic and cultural trends that affect the whole society but also to the specific lifestyles of consumer groups. Due to the importance of consumer lifestyle, the objectives of this study were (i) to identify the profiles of lamb meat consumers according to their orientation toward convenience, as defined by their eating and cooking habits; (ii) to characterize these profiles according to their socioeconomic characteristics and their preferences regarding the intrinsic and extrinsic quality signals of lamb meat; and (iii) to analyze the willingness to pay for lamb confit. In this study, four types of consumers have been differentiated according to their lifestyles related to lamb consumption. These groups, due to their characteristics, could be called "Gourmet", "Disinterested", "Conservative", and "Basic". The Gourmet group has characteristics that make it especially interesting to market a product such as lamb confit. However, this group is unaware of this product. Therefore, a possible strategy to expand the commercialization of light lamb and the confit product would be guided marketing to this niche market.

Design and characterization of an ultrasonic lamb-wave power delivery system.

Science.gov (United States)

Kural, Aleksander; Pullin, Rhys; Holford, Karen; Lees, Jonathan; Naylon, Jack; Paget, Christophe; Featherston, Carol

2013-06-01

In this paper, a novel design for an ultrasonic power transmission system designed for use in aircraft structural monitoring systems is described. The prototype system uses ultrasonic Lamb waves to carry energy along plates, such as those used in aircraft structures, and commercially available piezoelectric patch transducers as the transmitter and receiver. This sets it apart from other acoustic power transmission systems reported to date. The optimum configuration transmitted 12.7 mW of power across a distance of 54 cm in a 1.5-mm-thick aluminum plate, while being driven by a 20-Vpp, 35-kHz sinusoidal electric signal. This is in the same order of magnitude as the power required by the wireless sensors nodes of a structural health monitoring system currently being developed by Cardiff University and its partners. Thus, the power transmission system can be considered a viable component of the power source combination considered for the sensor nodes, which will also include vibration and thermal energy harvesting. The paper describes the design and optimization of the transmission and reception circuits with the use of inductive compensation. The use of laser vibrometry to characterize the transducers and to understand the signal propagation between them is also reported.

Lamb survival analysis from birth to weaning in Iranian Kermani sheep.

Science.gov (United States)

Barazandeh, Arsalan; Moghbeli, Sadrollah Molaei; Vatankhah, Mahmood; Hossein-Zadeh, Navid Ghavi

2012-04-01

Survival records from 1,763 Kermani lambs born between 1996 and 2004 from 294 ewes and 81 rams were used to determine genetic and non-genetic factors affecting lamb survival. Traits included were lamb survival across five periods from birth to 7, 14, 56, 70, and 90 days of age. Traits were analyzed under Weibull proportional hazard sire models. Several binary analyses were also conducted using animal models. Statistical models included the fixed class effects of sex of lamb, month and year of birth, a covariate effect of birth weight, and random genetic effects of both sire (in survival analyses) and animal (in binary analyses). The average survival to 90 days of age was 94.8%. Hazard rates ranged from 1.00 (birth to 90 days of age) to 1.73 (birth to 7 days of age) between the two sexes indicating that male lambs were at higher risk of mortality than females (P lamb survival and lamb birth weight, suggesting that viability and birth weight could be considered simultaneously in the selection programs to obtain optimal birth weight in Kermani lambs. Estimates of heritabilities from survival analyses were medium and ranged from 0.23 to 0.29. In addition, heritability estimates obtained from binary analyses were low and varied from 0.04 to 0.09. The results of this study suggest that progress in survival traits could be possible through managerial strategies and genetic selection.

Directional nonlinear guided wave mixing: Case study of counter-propagating shear horizontal waves

Science.gov (United States)

Hasanian, Mostafa; Lissenden, Cliff J.

2018-04-01

While much nonlinear ultrasonics research has been conducted on higher harmonic generation, wave mixing provides the potential for sensitive measurements of incipient damage unencumbered by instrumentation nonlinearity. Studies of nonlinear ultrasonic wave mixing, both collinear and noncollinear, for bulk waves have shown the robust capability of wave mixing for early damage detection. One merit of bulk wave mixing lies in their non-dispersive nature, but guided waves enable inspection of otherwise inaccessible material and a variety of mixing options. Co-directional guided wave mixing was studied previously, but arbitrary direction guided wave mixing has not been addressed until recently. Wave vector analysis is applied to study variable mixing angles to find wave mode triplets (two primary waves and a secondary wave) resulting in the phase matching condition. As a case study, counter-propagating Shear Horizontal (SH) guided wave mixing is analyzed. SH wave interactions generate a secondary Lamb wave mode that is readily receivable. Reception of the secondary Lamb wave mode is compared for an angle beam transducer, an air coupled transducer, and a laser Doppler vibrometer (LDV). Results from the angle beam and air coupled transducers are quite consistent, while the LDV measurement is plagued by variability issues.

Comparison of slowness profiles of lamb wave with elastic moduli and crystal structure in single crystalline silicon wafers

Energy Technology Data Exchange (ETDEWEB)

Min, Young Jae; Yun, Gyeong Won; Kim, Kyung Min; Roh, Yuji; Kim, Young H. [Applied Acoustics Lab, Korea Science Academy of KAIST, Busan (Korea, Republic of)

2016-02-15

Single crystalline silicon wafers having (100), (110), and (111) directions are employed as specimens for obtaining slowness profiles. Leaky Lamb waves (LLW) from immersed wafers were detected by varying the incident angles of the specimens and rotating the specimens. From an analysis of LLW signals for different propagation directions and phase velocities of each specimen, slowness profiles were obtained, which showed a unique symmetry with different symmetric axes. Slowness profiles were compared with elastic moduli of each wafer. They showed the same symmetries as crystal structures. In addition, slowness profiles showed expected patterns and values that can be inferred from elastic moduli. This implies that slowness profiles can be used to examine crystal structures of anisotropic solids.

Long-term effects of foetal undernutrition on intermediary metabolism in growing lambs

DEFF Research Database (Denmark)

Kiani, Ali; Nielsen, Mette Benedicte Olaf; Tauson, Anne-Helene

2011-01-01

The objective of this study was to investigate the effects of foetal undernutrition on the metabolism in growing lambs. Seven-month-old lambs whose nothers had been fed either restrictively (RN; n = 14) or adequately (AN; n = 6) in late gestation were fasted for three days. One hour before fasting......, IGF-I and leptin were not different between the two groups of lambs. Unexpectedly, at the end of the 3 d fasting, in spite of lower NEFA concentration (1.6 ± 0.03 vs. 1.9 ± 0.05 mM in Groups RN and AN, respectively), the BOHB concentration in RN lambs (0.94 ± 0.02 mM) was significantly higher than...... that in AN lambs (0.78 ± 0.04 mM). This higher rate of BOHB production might be interpreted as perturbations in etone body metabolism potentially induced by under-nutrition during foetal life. However, more investigations are necessary to clarify this interrelationship....

Impact of rotational grazing on management of gastrointestinal nematodes in weaned lambs.

Science.gov (United States)

Burke, J M; Miller, J E; Terrill, T H

2009-07-07

Gastrointestinal nematode (GIN) control for 'natural' or organic lamb production is needed, especially where Haemonchus contortus is prevalent. The objective was to determine the impact of rotational grazing on GIN infection of weaned lambs. In year 1, naturally infected Katahdin lambs (120 days of age) were randomly assigned to graze (1) continuous bermudagrass (CB; n=14), (2) rotational bermudagrass moved every 3.5 days and returned to original plot 35 days later for three rotations (RB; n=14), or (3) rotational bermudagrass rotated when forage height fell below 10 cm (RBH; n=7) where first day of grazing=Day 0. In late summer, all lambs were supplemented with 500 g corn/SBM because of poor condition. The following year, similar animals were used and included the CB (n=18) and the RB (n=36) groups only. In both years, fecal egg counts (FECs) and blood packed cell volume (PCV) were determined every 7-14 days and body weight every 28 days. Individuals were dewormed with 0.5 g copper oxide wire particles (COWP) when FAMACHA score increased to 3 or more. Between 0 and 3 deworming treatments per lamb were necessary and there tended to be fewer RB than CB lambs dewormed by Day 84 for both years combined (Pdays of grazing. Abomasal worm burden tended to be greater in RB than CB or RBH tracer lambs (P<0.10), but intestinal worm numbers were similar. Differences may be due to differences in grazing patterns among groups. Body weight gains were similar between CB and RB groups. Economic value between the CB and RB lambs was similar based on number of lambs that could have been marketed as organic. For both years, lambs relied exclusively on COWP for GIN control with the exception of one lamb. In summary, while there was a reduced incidence of deworming in the RB compared with the CB group of lambs, estimated economic value of these systems was similar.

Effects of ractopamine hydrochloride on growth performance and carcass characteristics in wool and hair lambs

Directory of Open Access Journals (Sweden)

Ángel M. Romero-Maya

2013-06-01

Full Text Available This study aimed at evaluating the effects of ractopamine hydrochloride (RAC on growth performance and carcass characteristics of wool and hair lambs. For this purpose, 48 lambs averaging 31.3 kg body weight, of which twenty were wool (Ramboullet x Suffolk and twenty eight were hair (Tabasco lambs, and four levels of RAC (0, 10, 20, and 30 mg/kg diet, dry matter basis were used. Wool lambs fed 20 and 30 mg RAC had higher (P<0.05 total gain weight and lower feed conversion than 0 and 10 mg RAC. Wool lambs fed 20 mg RAC had the highest carcass weight, dressing, legs weight and longissimus area as compared to 0, 10 and 30 mg RAC.  In hair lambs there were not effect of RAC on growth performance and carcass characteristics.It was concluded that addition of RAC to finishing diets offered the best growth performance and carcass traits in wool lambs as compared to hair lambs. 

Copper toxicity in housed lambs

Energy Technology Data Exchange (ETDEWEB)

Adamson, A H; Valks, D A; Appleton, M A; Shaw, W B

1969-09-27

Copper toxicity among 170 lambs artificially reared indoors at High Mowthorpe NAAS Experimental Husbandry Farm is reported. Although only three lambs were lost it is not unreasonable to suggest that the liver copper levels of the lambs which were slaughtered would have been high and losses could have been much heavier had there been any further copper supplementation. Even a copper level of 20 ppm in lamb concentrates given to lambs reared artificially indoors is dangerous, and intakes of much less than 38 mg per lamb per day can be fatal if given of a prolonged period. 5 references, 1 table.

7 CFR 65.190 - Lamb.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Lamb. 65.190 Section 65.190 Agriculture Regulations of..., PORK, LAMB, CHICKEN, GOAT MEAT, PERISHABLE AGRICULTURAL COMMODITIES, MACADAMIA NUTS, PECANS, PEANUTS, AND GINSENG General Provisions Definitions § 65.190 Lamb. Lamb means meat produced from sheep. ...

Organoleptic properties of meat from Altamurana and Trimeticcio lambs slaughtered at two different ages

Directory of Open Access Journals (Sweden)

A. Girolami

2010-04-01

Full Text Available The experiment was performed with thirty-two Altamurana and Trimeticcio lambs slaughtered at 42 and at 70 days of age. Meat organoleptic characteristics were determined on samples of M. Longissimus lumborum and Longissimus thoracis. Colour parameters were not affected by genotype, while L* value and index of yellow decreased (P<0.01 and P<0.05, respectively as age of slaughtering increased. Meat from Altamurana lambs showed lower juiciness (P<0.01 and fatness (P<0.05 than Trimeticcio lambs. No genotype and age of slaughtering effects were found for Warner-Bratzler shear force (WBSF values. Meat from younger lambs was more tender and chewable (P<0.01 but less juicy (P<0.001 and fatty (P<0.05 than meat from lambs slaughterd at 70 days.

S/WAVES: The Radio and Plasma Wave Investigation on the STEREO Mission

Czech Academy of Sciences Publication Activity Database

Bougeret, J. L.; Goetz, K.; Kaiser, M. L.; Bale, S. D.; Kellogg, P. J.; Maksimovic, M.; Monge, N.; Monson, S. J.; Astier, P. L.; Davy, S.; Dekkali, M.; Hinze, J. J.; Manning, R. E.; Aguilar-Rodriguez, E.; Bonnin, X.; Briand, C.; Cairns, I. H.; Cattell, C. A.; Cecconi, B.; Eastwood, J.; Ergun, R. E.; Fainberg, J.; Hoang, S.; Huttunen, K. E. J.; Krucker, S.; Lecacheux, A.; MacDowall, R. J.; Macher, W.; Mangeney, A.; Meetre, C. A.; Moussas, X.; Nguyen, Q. N.; Oswald, T. H.; Pulupa, M.; Reiner, M. J.; Robinson, P. A.; Rucker, H.; Salem, c.; Santolík, Ondřej; Silvis, J. M.; Ullrich, R.; Zarka, P.; Zouganelis, I.

2008-01-01

Roč. 136, 1-4 (2008), s. 487-528 ISSN 0038-6308 Grant - others: NASA (US) NAS5-03076 Institutional research plan: CEZ:AV0Z30420517 Keywords : S/WAVES * STEREO * plasma waves * radio waves Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 2.372, year: 2008

Damage detection in submerged plates using ultrasonic guided waves

Indian Academy of Sciences (India)

eddy currents. Most of the ... istics, Lamb waves were used for damage detection and inspection on a variety of applications like strips and ...... wide and 0.5 mm deep (12.5% of the plate thickness) was machined on the plate (figure 17) and.

7 CFR 1280.112 - Lamb products.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb products. 1280.112 Section 1280.112 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.112 Lamb products. Lamb...

Peri-Elastodynamic Simulations of Guided Ultrasonic Waves in Plate-Like Structure with Surface Mounted PZT

Directory of Open Access Journals (Sweden)

Subir Patra

2018-01-01

Full Text Available Peridynamic based elastodynamic computation tool named Peri-elastodynamics is proposed herein to simulate the three-dimensional (3D Lamb wave modes in materials for the first time. Peri-elastodynamics is a nonlocal meshless approach which is a scale-independent generalized technique to visualize the acoustic and ultrasonic waves in plate-like structure, micro-electro-mechanical systems (MEMS and nanodevices for their respective characterization. In this article, the characteristics of the fundamental Lamb wave modes are simulated in a sample plate-like structure. Lamb wave modes are generated using a surface mounted piezoelectric (PZT transducer which is actuated from the top surface. The proposed generalized Peri-elastodynamics method is not only capable of simulating two dimensional (2D in plane wave under plane strain condition formulated previously but also capable of accurately simulating the out of plane Symmetric and Antisymmetric Lamb wave modes in plate like structures in 3D. For structural health monitoring (SHM of plate-like structures and nondestructive evaluation (NDE of MEMS devices, it is necessary to simulate the 3D wave-damage interaction scenarios and visualize the different wave features due to damages. Hence, in addition, to simulating the guided ultrasonic wave modes in pristine material, Lamb waves were also simulated in a damaged plate. The accuracy of the proposed technique is verified by comparing the modes generated in the plate and the mode shapes across the thickness of the plate with theoretical wave analysis.

Peri-Elastodynamic Simulations of Guided Ultrasonic Waves in Plate-Like Structure with Surface Mounted PZT.

Science.gov (United States)

Patra, Subir; Ahmed, Hossain; Banerjee, Sourav

2018-01-18

Peridynamic based elastodynamic computation tool named Peri-elastodynamics is proposed herein to simulate the three-dimensional (3D) Lamb wave modes in materials for the first time. Peri-elastodynamics is a nonlocal meshless approach which is a scale-independent generalized technique to visualize the acoustic and ultrasonic waves in plate-like structure, micro-electro-mechanical systems (MEMS) and nanodevices for their respective characterization. In this article, the characteristics of the fundamental Lamb wave modes are simulated in a sample plate-like structure. Lamb wave modes are generated using a surface mounted piezoelectric (PZT) transducer which is actuated from the top surface. The proposed generalized Peri-elastodynamics method is not only capable of simulating two dimensional (2D) in plane wave under plane strain condition formulated previously but also capable of accurately simulating the out of plane Symmetric and Antisymmetric Lamb wave modes in plate like structures in 3D. For structural health monitoring (SHM) of plate-like structures and nondestructive evaluation (NDE) of MEMS devices, it is necessary to simulate the 3D wave-damage interaction scenarios and visualize the different wave features due to damages. Hence, in addition, to simulating the guided ultrasonic wave modes in pristine material, Lamb waves were also simulated in a damaged plate. The accuracy of the proposed technique is verified by comparing the modes generated in the plate and the mode shapes across the thickness of the plate with theoretical wave analysis.

Development and validation of equations utilizing lamb vision system output to predict lamb carcass fabrication yields.

Science.gov (United States)

Cunha, B C N; Belk, K E; Scanga, J A; LeValley, S B; Tatum, J D; Smith, G C

2004-07-01

This study was performed to validate previous equations and to develop and evaluate new regression equations for predicting lamb carcass fabrication yields using outputs from a lamb vision system-hot carcass component (LVS-HCC) and the lamb vision system-chilled carcass LM imaging component (LVS-CCC). Lamb carcasses (n = 149) were selected after slaughter, imaged hot using the LVS-HCC, and chilled for 24 to 48 h at -3 to 1 degrees C. Chilled carcasses yield grades (YG) were assigned on-line by USDA graders and by expert USDA grading supervisors with unlimited time and access to the carcasses. Before fabrication, carcasses were ribbed between the 12th and 13th ribs and imaged using the LVS-CCC. Carcasses were fabricated into bone-in subprimal/primal cuts. Yields calculated included 1) saleable meat yield (SMY); 2) subprimal yield (SPY); and 3) fat yield (FY). On-line (whole-number) USDA YG accounted for 59, 58, and 64%; expert (whole-number) USDA YG explained 59, 59, and 65%; and expert (nearest-tenth) USDA YG accounted for 60, 60, and 67% of the observed variation in SMY, SPY, and FY, respectively. The best prediction equation developed in this trial using LVS-HCC output and hot carcass weight as independent variables explained 68, 62, and 74% of the variation in SMY, SPY, and FY, respectively. Addition of output from LVS-CCC improved predictive accuracy of the equations; the combined output equations explained 72 and 66% of the variability in SMY and SPY, respectively. Accuracy and repeatability of measurement of LM area made with the LVS-CCC also was assessed, and results suggested that use of LVS-CCC provided reasonably accurate (R2 = 0.59) and highly repeatable (repeatability = 0.98) measurements of LM area. Compared with USDA YG, use of the dual-component lamb vision system to predict cut yields of lamb carcasses improved accuracy and precision, suggesting that this system could have an application as an objective means for pricing carcasses in a value

Myocardial blood flow and V/sub O2/ in conscious lambs with an aortopulmonary shunt

International Nuclear Information System (INIS)

Toorop, G.P.; Hardjowijono, R.; Dalinghaus, M.; Gerding, A.M.; Koers, J.H.; Zijlstra, W.G.; Kuipers, J.R.G.

1987-01-01

The authors measured myocardial blood flow (q/sub LVFW/) using radioactively-labeled microspheres and O 2 consumption of the left ventricular free wall (V/sub O 2 , LVFW/) in 13 chronically instrumented, 7-wk-old lambs with an aortopulmonary left-to-right shunt (S) and in 10 control lamps without a shunt (C). The measured V/sub O 2 , LVFW/ was compared with the calculated values obtained by two predictive indexes, the rate-pressure product (RPP) and the pressure-work index (PWI). Measured V/sub O 2 , LVFW/ in S lambs was significantly higher than in C lambs. This was achieved by the significantly higher q/sub LVFW/, since the arteriovenous O 2 difference across the left ventricular free wall was similar in both groups of lambs. Total coronary blood flow per unit body mass in S lambs was higher than in C lambs, not only because of the increased V/sub O 2 , LVFW/ per unit muscle mass, but also because of the increased total heart weight. Correct estimation of V/sub O 2 /, LVFW/ by means of the RPP and the PWI was only possible in C lambs. In S lambs the estimated values were significantly lower than the measured ones. They conclude that since V/sub O 2 , LVFW/ in S lambs is twice as high as in C lambs, the data support the view that a volume load caused by a left-to-right shunt may have a more profound effect on myocardial O 2 consumption than could be anticipated on the basis of previous work

Effect of breed on mineral composition of meat from light lambs

Directory of Open Access Journals (Sweden)

Zdravko Barać

2010-01-01

Full Text Available The proximate composition and mineral content of light lambs muscle (derived from Istrian and Dalmatian Pramenka breeds were studied. The M. Longissimus dorsi (MLD samples of 30 carcasses were analysed and the effects of breed and sex were studied. Although lambs of investigated breeds were similar for slaughter age (2.5 months, Dalmatian Pramenka had significantly higher carcass weights (CW; P<0.05. Breed had a significant influence on moisture and fat contents, whilst mineral composition (with the exception of selenium was scarcely affected by breed and sex. Fat and moisture contents were significantly correlated with cold CW. The magnesium, calcium, manganese and selenium contents were significantly correlated (r=0.50, -0.46, 0.44, 0.54; P<0.05 respectively with CW. This study contributes to characterization of lamb carcasses from Istrian Sheep and Dalmatian Pramenka breeds and provides new data on the composition of the MLD of light lambs.

Willis Eugene Lamb (1913 - 2008) - Passion for precision

International Nuclear Information System (INIS)

Pain, J.C.

2013-01-01

In 1947, Willis Eugene Lamb with Robert Retherford measured a gap between the 2 fine structure levels 2s(1/2) and 2p(1/2) of the hydrogen atom while the Dirac equations gave them the same energy. This discovery called 'Lamb shift' was a driving factor for the development of quantum electrodynamics after the second world war. Lamb has also contributed to various fields of quantum physics, he studied the ejection of electrons by metastable atoms and also the Bose-Einstein condensation. In 1939, he predicted nuclear transitions that led to the discovery of the Moessbauer effect 22 years later

Effects of weaning age on growth, nutrient digestibility and metabolism, and serum parameters in Hu lambs

Directory of Open Access Journals (Sweden)

Jianmin Chai

2015-12-01

Full Text Available This study was conducted to investigate the effect of weaning age on growth performance, nutrient digestion and metabolism, and serological indicators, and to obtain an optimal weaning age in Hu lambs. Forty-eight newborn Hu lambs (birth weight, 2.53 ± 0.14 kg were randomly divided into 4 groups. The lambs in control group (ER suckled their dams. The lambs in other three experimental groups were weaned on milk replacer at 10, 20, and 30 days of age (EW10, EW20, and EW30 groups, respectively. The results were as follows: 1 lambs in EW10 and EW30 groups had a lower (P  0.05 among groups; however, the apparent digestibility and deposition of calcium in early weaned lambs were lower (P < 0.05 than those in ewe-reared lambs. 4 The albumin content in EW30 group was lower (P < 0.05 than that in ER group; the globulin content in EW30 group was higher (P < 0.05 than that in other groups; the content of serum insulin-like growth factor-Ⅰ in weaned lambs tended to increase compared with lambs in ER group. Finally, the growth rate of lambs decreased within 10 days post-weaning, but early weaning boosted creep feed intake, leading to better growth and health later in life. The Hu lambs can be weaned on milk replacer and creep feed at 10 days of age.

Single Sustained Inflation followed by Ventilation Leads to Rapid Cardiorespiratory Recovery but Causes Cerebral Vascular Leakage in Asphyxiated Near-Term Lambs.

Directory of Open Access Journals (Sweden)

Kristina S Sobotka

Full Text Available A sustained inflation (SI rapidly restores cardiac function in asphyxic, bradycardic newborns but its effects on cerebral haemodynamics and brain injury are unknown. We determined the effect of different SI strategies on carotid blood flow (CaBF and cerebral vascular integrity in asphyxiated near-term lambs.Lambs were instrumented and delivered at 139 ± 2 d gestation and asphyxia was induced by delaying ventilation onset. Lambs were randomised to receive 5 consecutive 3 s SI (multiple SI; n = 6, a single 30 s SI (single SI; n = 6 or conventional ventilation (no SI; n = 6. Ventilation continued for 30 min in all lambs while CaBF and respiratory function parameters were recorded. Brains were assessed for gross histopathology and vascular leakage.CaBF increased more rapidly and to a greater extent during a single SI (p = 0.01, which then decreased below both other groups by 10 min, due to a higher cerebral oxygen delivery (p = 0.01. Blood brain barrier disruption was increased in single SI lambs as indicated by increased numbers of blood vessel profiles with plasma protein extravasation (p = 0.001 in the cerebral cortex. There were no differences in CaBF or cerebral oxygen delivery between the multiple SI and no SI lambs.Ventilation with an initial single 30 s SI improves circulatory recovery, but is associated with greater disruption of blood brain barrier function, which may exacerbate brain injury suffered by asphyxiated newborns. This injury may occur as a direct result of the initial SI or to the higher tidal volumes delivered during subsequent ventilation.

Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis

Science.gov (United States)

Fakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey

2018-02-01

Ultrasonic guided waves (GWs), e.g. Lamb waves, have been proven effective in the detection of defects such as corrosion, cracking, delamination, and debonding in both composite and metallic structures. They are a significant tool employed in structural health monitoring. In this study, the ability of ultrasonic GWs to assess the quality of friction stir welding (FSW) was investigated. Four friction stir welded AZ31B magnesium plates processed with different welding parameters and a non-welded plate were used. The fundamental symmetric (S0) Lamb wave mode was excited using piezoelectric wafers (PZTs). Further, the S0 mode was separated using the "Improved complete ensemble empirical mode decomposition with adaptive noise (Improved CEEMDAN)" technique. A damage index (DI) was defined based on the variation in the amplitude of the captured wave signals in order to detect the presence and asses the severity of damage resulting from the welding process. As well, computed tomography (CT) scanning was used as a non-destructive testing (NDT) technique to assess the actual weld quality and validate predictions based on the GW approach. The findings were further confirmed using finite element analysis (FEA). To model the actual damage profile in the welds, "Mimics" software was used for the 3D reconstruction of the CT scans. The built 3D models were later used for evaluation of damage volume and for FEA. The damage volumes were correlated to the damage indices computed from both experimental and numerical data. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the friction stir welded joints. This methodology has great potential as a future classification method of FSW quality.

A model-dependent approach to the non-relativistic Lamb shift

Science.gov (United States)

Diaz-Valdes, J. F.; Bruce, S. A.

2018-02-01

The precise observation of the Lamb shift, between the 2s_{1/2} and 2p_{1/2} levels in hydrogen, was a genuine motivation for the development of modern quantum electrodynamics. According to Dirac theory, the 2s_{1/2} and 2p_{1/2} levels should have equal energies. However, "radiative corrections" due to the interaction between the atomic electron and the vacuum, shift the 2s_{1/2} level higher in energy by around 4.37493× 10^{-6} eV or 2π\\hbar× 1057.85 MHz relative to the 2p_{1/2} level. The measurement of Lamb and Retherford provided the stimulus for renormalization theory which has been so successful in handling troublesome divergences. The Lamb shift is still a central theme in atomic physics. W.E. Lamb was the first to see that this tiny shift, so elusive and hard to measure, would clarify in a fundamental way our thinking about particles and fields. In this article, the Lamb shift for the 2 s energy level in hydrogen is assessed for three different electron models by using the variational principle. It is then verified that this shift arises mostly from the interaction of a bound electron with the zero-point fluctuations of the free electromagnetic field (Welton's interpretation). We briefly comment on the construct validity of the proposed electron models.

New values for some 4He I 1snl energy levels, ionization energies, and Lamb shifts

International Nuclear Information System (INIS)

Martin, W.C.

1984-01-01

Recent experimental determinations of energy separations within the 1snl term system (n = 2--6) have been used to reevaluate 35 levels. Most of the levels have estimated errors less than 0.001 cm -1 relative to the 2 3 P levels. Addition of accurate theoretical term values (ionization energies) available for several 1snl levels to the corresponding experimental level values gives generally consistent values for the principal ionization energy (E/sub I/). The theoretical energies are further confirmed by the agreement of the weighted average of seven of these E/sub I/ values with a value obtained by fitting Ritz formulas to three accurately determined 1snl series; the suggested new E/sub I/ is 198 310.7745(40) cm -1 on an energy scale fixed by the value 171 135.0000 cm -1 for 2 1 P. Lamb shifts are derived for the 2, 3, 4 3 S 1 , 2 1 S 0 , 2 3 P 1 , and 2 1 P 1 levels as differences between experimental term values obtained with the new E/sub I/ and corresponding calculated term values not including Lamb shifts. The experimental and calculated values for the 1s 2 1 S 0 ground level relative to the present 1snl excited-level system are 0.00 +- 0.15 and 0.073 +- 0.009 cm -1 , respectively, so that a approx.20-fold increase in the experimental accuracy would be required to test the calculated ground-level Lamb shift

Transfer of radiocesium from different environmental sources to ewes and suckling lambs

International Nuclear Information System (INIS)

Howard, B.J.; Mayes, R.W.; Beresford, N.A.; Lamb, C.S.

1989-01-01

Indoor experiments are described that compare the transfer of radiocesium to ewe and lamb tissues from different sources. Lactating ewes were fed either perennial ryegrass contaminated by Chernobyl fallout, or saltmarsh vegetation contaminated by marine discharges from the Sellafield reprocessing plant. The transfer to ewe tissues and milk was greater from the Chernobyl contaminated herbage than from saltmarsh vegetation. Lambs receiving a mixture of vegetation and milk were given radiocesium from one of the two vegetation sources or from milk obtained from the experimental ewes. Transfer to lamb tissues declined in the order milk greater than Chernobyl fallout greater than Sellafield discharge. The radiocesium transfer to lamb tissues exceeded that to ewe tissues. Transfer coefficients for 137Cs in the Chernobyl fallout were higher than most previously published figures at 0.12 d kg-1 for ewe muscle and 0.50 d kg-1 for lamb muscle. The transfer coefficient for 137Cs from ewe milk to lamb muscle was 1.20 d kg-1

Amplitude analysis for the process K-p→(π+π-)sub(s-wave)Σ0(1385)

International Nuclear Information System (INIS)

Barreiro, F.; Zalewski, K.; Aguilar-Benitez, M.; Hemingway, R.J.; Holmgren, S.O.; Losty, M.J.; Kluyver, J.G.; Massaro, G.G.G.; Timmermans, J.J.; Walle, R.T. van de

1977-01-01

Transversity amplitudes and spin density matrix elements are determined for the process K - p→(π + π - )sub(s-wave)Σ 0 (1385). Predictions of the additive quark model and of duality diagrams are tested and found consistent with the data; this is the first information about the applicability of these models to processes where a scalar object is produced at the mesonic vertex. (Auth.)

Diffusion tensor imaging detects ventilation-induced brain injury in preterm lambs.

Directory of Open Access Journals (Sweden)

Dhafer M Alahmari

Full Text Available Injurious mechanical ventilation causes white matter (WM injury in preterm infants through inflammatory and haemodynamic pathways. The relative contribution of each of these pathways is not known. We hypothesised that in vivo magnetic resonance imaging (MRI can detect WM brain injury resulting from mechanical ventilation 24 h after preterm delivery. Further we hypothesised that the combination of inflammatory and haemodynamic pathways, induced by umbilical cord occlusion (UCO increases brain injury at 24 h.Fetuses at 124±2 days gestation were exposed, instrumented and either ventilated for 15 min using a high tidal-volume (VT injurious strategy with the umbilical cord intact (INJ; inflammatory pathway only, or occluded (INJ+UCO; inflammatory and haemodynamic pathway. The ventilation groups were compared to lambs that underwent surgery but were not ventilated (Sham, and lambs that did not undergo surgery (unoperated control; Cont. Fetuses were placed back in utero after the 15 min intervention and ewes recovered. Twenty-four hours later, lambs were delivered, placed on a protective ventilation strategy, and underwent MRI of the brain using structural, diffusion tensor imaging (DTI and magnetic resonance spectroscopy (MRS techniques.Absolute MRS concentrations of creatine and choline were significantly decreased in INJ+UCO compared to Cont lambs (P = 0.03, P = 0.009, respectively; no significant differences were detected between the INJ or Sham groups and the Cont group. Axial diffusivities in the internal capsule and frontal WM were lower in INJ and INJ+UCO compared to Cont lambs (P = 0.05, P = 0.04, respectively. Lambs in the INJ and INJ+UCO groups had lower mean diffusivities in the frontal WM compared to Cont group (P = 0.04. DTI colour mapping revealed lower diffusivity in specific WM regions in the Sham, INJ, and INJ+UCO groups compared to the Cont group, but the differences did not reach significance. INJ+UCO lambs more likely to exhibit

The Lamb shift in muonic hydrogen

Energy Technology Data Exchange (ETDEWEB)

Nebel, Tobias

2010-06-25

The subject of this thesis is the first measurement of the 2S-2P Lamb shift in muonic hydrogen ({mu}p). In this project, which has been performed at the proton-accelerator facility of the Paul-Scherrer-Institute in Switzerland, the exotic analogon to the classical Lamb shift in hydrogen has been examined by laser spectroscopy. Negative muons are produced at a specially developed low-energy muon beam at a rate of 330 s{sup -1} and are stopped in 1 hPa of H{sub 2} gas. In the gas, highly excited {mu}p atoms are formed, most of which promptly cascade to the ground state within {proportional_to}100 ns. Only a fraction of 1.1% forms {mu}p atoms in the long-lived 2S state with a lifetime of 1.0 {mu}s. An elaborate laser system triggered on every incoming muon delivers 0.2 mJ laser pulses at {lambda}{approx_equal}6 {mu}m with 500 s{sup -1} repetition rate. The laser illuminates the {mu}p atoms 900 ns after the prompt muon cascade inducing the 2S-2P transition when on resonance. A 1.9 keV K{sub {alpha}} X-ray is emitted in the subsequent deexcitation to the 1S ground state and is recorded by large area avalanche photodiodes. The laser induced K{sub {alpha}} events are clearly distinguishable from the exponential background. For the 2S{sub 1/2}{sup F=1} - 2P{sub 3/2}{sup F=2} transition in {mu}p, it is given by {nu}{sub 2S-2P}=49 881 695 (711)MHz with a relative accuracy of 1.4 x 10{sup -5}. Assuming the correctness of the bound-state QED calculations of the Lamb shift in {mu}p, a new value for the rms proton charge radius r{sub p} can be derived: r{sub p}=0:84192(65) fm. Using the precisely measured 1S-2S transition frequency in hydrogen (relative accuracy of 1.4 parts in 10{sup 14}) and combining it with our new value of r{sub p}, a new value for the Rydberg constant R{sub {infinity}} can be derived with a relative accuracy of 1.5 parts in 10{sup 12}: R{sub {infinity}}=10 973 731.568 161(16)m{sup -1}. Beside the 2S{sub 1/2}{sup F=1}-2P{sub 3/2}{sup F=2} transition in {mu

Stress responses in lambs castrated with three different methods

Directory of Open Access Journals (Sweden)

Paola Sandra Nicolussi

2010-01-01

Full Text Available The present work was conducted to evaluate the animal response to stress in lambs caused by three different castration techniques. Forty-six male lambs aged 4-5 months were randomly allocated to one of four groups including Burdizzo (B, scrotal ablation (SA, orchiectomy (OR and control handling (H. Local anaesthesia (lidocaine 2% was administered in both spermatic cords and the scrotal neck of lambs before each treatment. Blood samples were collected at -30, -10, +1, +20, +40, +60, +120, and +180 minutes. Serum cortisol concentrations were determined using a competitive immunoassay and the area under the curve (AUC was calculated for each lamb. The following biochemical parameters were assayed for each animal at each time point: alanine aminotransferase (ALT, aspartate aminotransferase (AST, lactate dehydrogenase (LDH, creatine kinase (CK and glucose (GLU. The time needed for total lesion resolution and weight gain of each animal was recorded. Orchiectomy elicits the greatest cortisol response, significantly greater than that seen in similarly handled controls (P≤0.01, Burdizzo and scrotal ablation groups (P≤0.05. The serum cortisol AUC was higher in the scrotal ablation group (P≤0.05 than controls, but lower than in the orchiectomy group (P≤0.05. The Burdizzo group didn’t differ from controls. Serum glucose levels of the castrated lambs differed significantly from the control group, following a trend similar to cortisol. No change was seen in ALT, AST, LDH or CK. No difference in weight gain was seen among the groups. Our results suggest that use of the Burdizzo is the preferable castration technique for adult lambs, while scrotal ablation is a valid surgical alternative to orchiectomy and permits more rapid wound healing that is ideal for extensive management where flocks are not under close observation.

7 CFR 1280.217 - Lamb purchases.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Lamb purchases. 1280.217 Section 1280.217 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Assessments § 1280.217 Lamb purchases. (a...

Detecção óptica de onda de Lamb

OpenAIRE

Rodrigo Andrade Cavalcanti Araujo

1996-01-01

Esta tese apresenta a análise teórica e experimental da detecção de onda de Lamb em sólido isotrópico, através da utilização de um interferômetro óptico tipo Mach-Zehnder heterodino. Foi desenvolvida uma formulação para analisar a interação acusto-óptica superficial que utiliza a onda de Lamb, levando-se em consideração ambas as componentes de deslocamento acústico geradas pela onda de Lamb. Os resultados dessa análise revelaram que, ao contrário do que é regularmente divulgado na literatura,...

Effect of breed and feeding on the carcass characteristics of the Chilote breed lamb

Directory of Open Access Journals (Sweden)

Jorge Ramírez-Retamal

2013-03-01

Full Text Available The Chilote sheep has been developed in an isolated environment, based on grazing lands with low nutritive value belonging to small-scale producers, because of which there is little information about the use of this breed for meat production. The objective of this work was to determine the effects on lamb carcasses of two breeds with different productive purposes and fed on pastures with different nutritional quality. Three groups of lambs were used. The first and second groups were composed of 13 and 11 Chilote lambs respectively, and the third composed of six Suffolk Down lambs. Lambs remained with their mothers, the first group on naturalized pasture and the rest on rangeland. Animals were slaughtered at 90 d of age. Live weight, carcass weight and yield, and several zoometric parameters were determined, as well as the weight of commercial cuts and the muscle, bone and fat ratios. Hide and hoof weights were also measured. For the effect of breed, Chilote lamb is narrower (P < 0.05 than Suffolk Down, but with a higher proportion of hide (P < 0.05 and hooves (P < 0.05. The type of pasture only affected hot carcass yield, which was higher in Chilote lamb with naturalized pasture than with rangeland (P < 0.05. There were no effects of breed or pasture type on the main characteristics of the lamb carcasses.

Influence of alfalfa grazing-based feeding systems on carcass fat colour and meat quality of light lambs.

Science.gov (United States)

Ripoll, G; Albertí, P; Joy, M

2012-02-01

One hundred and twenty-seven lambs were fed as follows: lambs and dams grazing alfalfa (Gr); the same as Gr but lambs had access to concentrate (Gr + S); ewes grazed and lambs received milk and concentrate until weaning and thereafter concentrate and straw (Rat-Gr); ewes and lambs were stall-fed (Ind). Lambs were slaughtered at 22-24 kg live weight and fat and M. rectus abdominis colour was measured instrumentally and subjectively. The evolution of the instrumental colour and texture of M. longissimus lumborum was also recorded. There were significant differences in the instrumental colour of subcutaneous fat amongst feeding systems, but no differences were observed upon visual appraisal. On average, M. rectus abdominis colour in the four feeding systems was classed as pink. Differences in longissimus thoracis colour at 0 h disappeared at 24h of air exposure and there were no differences in pH or cooking losses. At no time were any differences in instrumental texture found. Copyright © 2011 Elsevier Ltd. All rights reserved.

7 CFR 65.170 - Ground lamb.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Ground lamb. 65.170 Section 65.170 Agriculture... OF BEEF, PORK, LAMB, CHICKEN, GOAT MEAT, PERISHABLE AGRICULTURAL COMMODITIES, MACADAMIA NUTS, PECANS, PEANUTS, AND GINSENG General Provisions Definitions § 65.170 Ground lamb. Ground lamb means comminuted...

Observation of the $\\mathrm{B}^{*}_{\\mathrm{s}2}(5840)^0\\rightarrow\\mathrm{B}^0\\mathrm{K}^0_{\\mathrm\\scriptscriptstyle S}$ decay and studies of excited $\\mathrm{B}^0_\\mathrm{s}$ mesons in proton-proton collisions at $\\sqrt{s}=8\\,\\mathrm{TeV}$

CERN Document Server

CMS Collaboration

2018-01-01

The observation of the $\\mathrm{B}^{*}_{\\mathrm{s}2}(5840)^0\\rightarrow\\mathrm{B}^0\\mathrm{K}^0_{\\mathrm\\scriptscriptstyle S}$ decay is presented and a measurement of its relative branching fraction to the $\\mathrm{B}^{*}_{\\mathrm{s}2}(5840)^0\\rightarrow\\mathrm{B}^+\\mathrm{K}^{-}$ decay using a data sample of $19.6\\,\\mathrm{fb}^{-1}$ collected with the CMS detector in proton-proton collision at the centre-of-mass energy $8\\,\\mathrm{TeV}$. The analysis is performed by studying P-wave $\\mathrm{B}^{0}_\\mathrm{s}$ meson decays into $\\mathrm{B}^+\\mathrm{K}^-$ and $\\mathrm{B}^0 \\mathrm{K}^0_{\\mathrm\\scriptscriptstyle S}$ states, where the ground-state $\\mathrm{B}$ mesons are identified using the decays $\\mathrm{B}^+ \\rightarrow \\mathrm{J}/\\psi\\mathrm{K}^+$ and $\\mathrm{B}^0 \\rightarrow \\mathrm{J}/\\psi\\mathrm{K}^+ \\pi^-$. The masses of P-wave $\\mathrm{B}^0_\\mathrm{s}$ meson states are measured and the natural width of the $\\mathrm{B}^{*}_{\\mathrm{s}2}(5840)^0$ state is determined to be $\\Gamma(\\mathrm{B}^{*}_{\\mathr...

Earthquake early warning using P-waves that appear after initial S-waves

Science.gov (United States)

Kodera, Y.

2017-12-01

As measures for underprediction for large earthquakes with finite faults and overprediction for multiple simultaneous earthquakes, Hoshiba (2013), Hoshiba and Aoki (2015), and Kodera et al. (2016) proposed earthquake early warning (EEW) methods that directly predict ground motion by computing the wave propagation of observed ground motion. These methods are expected to predict ground motion with a high accuracy even for complicated scenarios because these methods do not need source parameter estimation. On the other hand, there is room for improvement in their rapidity because they predict strong motion prediction mainly based on the observation of S-waves and do not explicitly use P-wave information available before the S-waves. In this research, we propose a real-time P-wave detector to incorporate P-wave information into these wavefield-estimation approaches. P-waves within a few seconds from the P-onsets are commonly used in many existing EEW methods. In addition, we focus on P-waves that may appear in the later part of seismic waves. Kurahashi and Irikura (2013) mentioned that P-waves radiated from strong motion generation areas (SMGAs) were recognizable after S-waves of the initial rupture point in the 2011 off the Pacific coast of Tohoku earthquake (Mw 9.0) (the Tohoku-oki earthquake). Detecting these P-waves would enhance the rapidity of prediction for the peak ground motion generated by SMGAs. We constructed a real-time P-wave detector that uses a polarity analysis. Using acceleration records in boreholes of KiK-net (band-pass filtered around 0.5-10 Hz with site amplification correction), the P-wave detector performed the principal component analysis with a sliding window of 4 s and calculated P-filter values (e.g. Ross and Ben-Zion, 2014). The application to the Tohoku-oki earthquake (Mw 9.0) showed that (1) peaks of P-filter that corresponded to SMGAs appeared in several stations located near SMGAs and (2) real-time seismic intensities (Kunugi et al

High frequency guided wave propagation in monocrystalline silicon wafers

Science.gov (United States)

Pizzolato, Marco; Masserey, Bernard; Robyr, Jean-Luc; Fromme, Paul

2017-04-01

Monocrystalline silicon wafers are widely used in the photovoltaic industry for solar panels with high conversion efficiency. The cutting process can introduce micro-cracks in the thin wafers and lead to varying thickness. High frequency guided ultrasonic waves are considered for the structural monitoring of the wafers. The anisotropy of the monocrystalline silicon leads to variations of the wave characteristics, depending on the propagation direction relative to the crystal orientation. Full three-dimensional Finite Element simulations of the guided wave propagation were conducted to visualize and quantify these effects for a line source. The phase velocity (slowness) and skew angle of the two fundamental Lamb wave modes (first anti-symmetric mode A0 and first symmetric mode S0) for varying propagation directions relative to the crystal orientation were measured experimentally. Selective mode excitation was achieved using a contact piezoelectric transducer with a custom-made wedge and holder to achieve a controlled contact pressure. The out-of-plane component of the guided wave propagation was measured using a noncontact laser interferometer. Good agreement was found with the simulation results and theoretical predictions based on nominal material properties of the silicon wafer.

Physicochemical characteristics of meat from pantaneiro lambs slaughtered with different of subcutaneous fat thicknesses

Directory of Open Access Journals (Sweden)

Natália Holtz Alves Pedroso Mora

2015-08-01

Full Text Available Twenty-four lambs of the pantaneiro genetic group were used in a completely randomized design with eight replicates, slaughtered with subcutaneous fat thicknesses (SFT of 2.0, 3.0 and 4.0 mm, which was evaluated by ultrasound in the longissimus dorsi muscle to measure the effect of the SFT on the physicochemical properties of the meat. The animals received water ad libitum throughout the experimental period and were fed a complete, pelleted ration formulated to provide an average daily gain of 0.300 kg-1. As the lambs reached the predetermined SFT in the fortnightly evaluation by ultrasound, they were slaughtered the day after the measurements, regardless of weight. The pH values for 0h00 (6.58 and 24h00 (5.50 and cooking loss (23.99% did not differ between treatments. Regarding the meat color, lambs slaughtered with 2.0 mm and 3.0 mm SFT had meat with greater lightness and the meat from those with 3.0 and 4.0 mm SFT showed higher values for the intensity of red and yellow. Lambs slaughtered with 4.0 mm SFT (1.43 kgf had more tender meat than those slaughtered with a SFT of 2.0 mm. Lambs slaughtered with 4.0 mm SFT had the greatest sarcomere length (1.47 ?m. The crude protein (21.15% and moisture (72.38% contents in the 2.0 mm treatment were higher than those in the 4.0 mm treatment. The total lipids (4.84% in the meat from 4.0 mm SFT animals were higher than those in the meat from 2.0 mm SFT lambs. Slaughtering lambs with 3.0 mm of fat thickness in the loin is recommended, as these animals comprise a larger number of favorable characteristics with regard to the meat chemical composition, softness, and color.

The Productivity of Male Thin-Tailed Lambs and Sheep Fed Complete Feed

Science.gov (United States)

Aluns, M. S.; Luthfi, N.

2018-02-01

The aim of this study is to examine the productivity of thin tailed lambs and sheep fed complete feed. The material used in this study were 6 thin tailed lambs aged ± 5 months with an average body weight of 15.41 ± 2.11 kg (CV 37.04%) and 6 thin tailed rams aged ± 1 year with an average body weight of 23, 01 ± 1.91 kg (CV 28.83%). The animals were raised intensively with complete feed as much as 3.5% of body weight. The feed contained 12% crude protein (CP) and 55% Total Digestible Nutrients (TDNs). The results showed that the average feed intake was 567.10 g DMI/d in lambs and 726.24 g DMI per day in sheep. An average of body gain of lambs was 0.02 kg/d and 0.01 kg/d. The day matter digestibility of lambs achieves 50.23% and 50.74% in sheep. Based on results, it can be inferred that lambs has same digestibility with sheep and has more efficient to be fattened than sheep.

Development of organs and tissues in lambs raised on Spanish mountain grassland

OpenAIRE

Álvarez-Rodríguez, J.; Sanz, A.; Joy, M.; Carrasco, S.; Ripoll, G.; Teixeira, A.

2009-01-01

The present study was conducted to establish the pattern of body development in grass-raised Churra Tensina lambs. Forty-nine single male lambs were slaughtered at three body-weight intervals, according to the commercial categories of suckling (11.191.0kg), light (22.190.8 kg) and heavy lamb (32.092.9 kg). Non-carcass and carcass components were recorded and the half left carcasses were completely dissected. Lambs showed a low growth rate of main organs in relation to empty body w...

Serum testosterone level and affecting factors in Syrian Awassi ram lambs

International Nuclear Information System (INIS)

Zarkawi, M.

2004-01-01

Results showed that testosterone exists in the blood of ram lams as early as the first month of age with no significant difference between single and twin births. This level, however, increased gradually with advancing age of ram lambs, indicating that the gonads (testes) of these growing lambs were active in secreting testosterone hormone after birth, but the rate of secretion differed with age of the lambs. A sharp increase in testosterone level was recorded at age of 8 months in twin births (5.32 ± 20.99 nmol/l) and in single births (7.26 ± 3.29 nmol/l). Throughout the study period, mean testosterone serum level was 3.29 ± 2.73 and 2.54 ± 2.15 nmol/l for single and twin births, respectively, as compared with an overall mean of 3.00 ± 2.49 nmol/l. However, the monthly difference in testosterone level between single and twin births was not significant (P>0.05) throughout the study period (10 months). Results also indicated an increase in live weight of lambs with advancing age, and live weight in single births was higher, but not significantly, than in twin births throughout the study period. Results of the study showed a sharp increase in the mean live weight of single births at age of 8 months (48.5 ± 10.8 kg) as compared with an overall live weight of the lambs (35.8 ± 15.2 and 32.7 ± 15.4 kg for single and twin births, respectively). A positive and significant correlation (r= 0.95, P>0.0001) was found between serum testosterone level and lamb live weight during the first 10 months of their age. Finally and for the first time, normal serum testosterone levels in Syrian Awassi ram lambs were determined during early stages. It was concluded, based on both, testosterone level and lamb live weight, that puberty in Awassi ram lambs could be reached at 8 months of age with a mean live weight of around 47 kg. Type of birth, lamb birth weight or weaning weight had no significant effect on testosterone level. (author)

Behaviour of tail-docked lambs tested in isolation

Directory of Open Access Journals (Sweden)

Marchewka Joanna

2016-12-01

Full Text Available The aims of the current study were to detect behavioural indicators of pain of tail-docked sheep tested in isolation and to determine the relationship between behaviour and the pain levels to which they were exposed. Twenty-four female lambs, randomly assigned to four pens, had their tail docked with a rubber ring (TD; n = 6 without pain control procedures, TD with anaesthesia (TDA; n = 6 or TD with anaesthesia and analgesia (TDAA; n = 6. Additionally, six lambs handled but without tail docking or application of pain relief measures were used as the control (C. On the day prior (Day –1 to the TD and on days 1, 3 and 5 post-procedure, each lamb was individually removed from its group and underwent a 2.5 min open field test in a separate pen. Frequencies of behaviours such as rest, running, standing, walking and exploring were directly observed. Frequencies of exploratory climbs (ECs and abrupt climbs (ACs over the testing pen’s walls were video-recorded. Data were analysed using generalised linear mixed models with repeated measurements, including treatment and day as fixed effects and behaviour on Day –1 as a linear covariate. Control and TDAA lambs stood more frequently than TD lambs. TD lambs performed significantly more ACs compared to all other treatment groups. No other treatment effects were detected. A day effect was detected for all behaviours, while the EC frequency was highest for all tail-docked lambs on Day 5. Findings suggest that standing, ACs and ECs could be used as potential indicators of pain in isolated tail-docked lambs. However, differences in ECs between treatments only appeared 3 d after tail docking.

Perinatal lamb mortality: an assessment of gross, histological and immunohistochemical changes in the central nervous system.

Science.gov (United States)

Lashley, Vd; Roe, Wd; Kenyon, Pr; Thompson, Kg

2014-05-01

To compare the vascular and neuronal changes in the central nervous system (CNS) of lambs that died in the first 3 days after birth, from various causes, with control lambs subject to euthanasia. Dead lambs (n=65) were collected daily during the period 07 September 2010 to 26 September 2010 from a flock of 200 twin-lamb-bearing ewes. Age-matched lambs from the same flock were subject to euthanasia as a control group (n=39). Necropsies were conducted on all study lambs. The cause of death in lambs found dead was categorised as starvation-mismothering-exposure complex (SME), dystocia, or other, based on gross necropsy findings. Deaths were categorised as SME in lambs with necropsy lesions of pericardial, perirenal and mesenteric fat catabolism, an empty gastrointestinal tract and completely inflated lungs. Dystocia was diagnosed by the presence of a swollen tongue, injected sclera and subcutaneous oedema and haemorrhage around the head and neck or hind limbs. Deaths were categorised as other if an obvious cause of death could not be ascertained and if evidence of infection was identified. The CNS of each lamb necropsied was assessed grossly for haemorrhage, and using histopathology to determine vascular and neuronal changes. Immunohistochemistry was performed on selected cases (n=36) to confirm neuronal death. Of the 65 lambs found dead, 16 (25%) had evidence of cerebral and spinal meningeal haemorrhage, whereas of the 39 clinically normal control lambs, all displayed gross evidence of cerebral and spinal meningeal haemorrhage. There was no evidence of parenchymal vacuolation, neuronal vacuolation or ischaemic neurons in any of the lamb brain sections including those that died with evidence of dystocia. There was no difference, within the regions examined, in mean vascular score between lambs categorised by cause of death (p>0.05). The overall mean vascular score for the brain stem was greater than the mid brain (p=0.02) and the cortex (p=0.005) but did not differ

Effects of Electrical Stimulation on Meat Quality of Lamb and Goat Meat

Directory of Open Access Journals (Sweden)

Omer Cetin

2012-01-01

Full Text Available Effect of various voltage of electrical stimulation (ES on meat quality of lamb and goat was investigated by using a total of 36 animals at 3–5 years old. Constant 50 Hz frequency and 50, 100, and 250 V, 90 sec of ES were administered to 1/2 carcasses and were examined according their textural, physicochemical, and sensorial characteristics. ES decreased the pH values of lamb and goat meat, and accelerated the rigor mortis (<0.05. Additionally, ES enhanced the water activity, water-holding capacity, and drip loss of both animals. Shear force varied between lamb and goat meat, and tenderness was improved depending on voltage range used (<0.001. ES caused difference in instrumental colour (CIE ∗, ∗, ∗ values of lamb and goat meat compared with the control groups (<0.05 during aging period at 4°C. Sensorial characteristics were also improved with various levels of ES treatments. In conclusion, ES had positive effects on meat quality of lamb and goat, in contrast to undesirable consumer preferences.

Effects of sunflower soap stocks on light lamb meat quality.

Science.gov (United States)

Blanco, C; Giráldez, J F; Morán, L; Mateo, J; Villalobos-Delgado, L H; Andrés, S; Bodas, R

2017-08-01

Thirty-two lambs were used to study the effect of sunflower soap stocks (SS), a by-product from the vegetable oil refinery industry, on meat chemical composition, fatty acid profile, volatile compounds, and consumer acceptability. Lambs were finished (average length of fattening period 35 ± 7.3 d, 26.8 ± 0.09 kg final BW) on a pelleted total mixed ration (TMR) with no SS (00SS) or including 15, 30 or 60 g SS/kg (15SS, 30SS, and 60SS, respectively). Sunflower soap stocks decreased the percentage of SFA, increased the proportion of -MUFA ( 0.05). Atherogenicity and saturation indexes decreased by 31% and 27%, respectively, in SS groups compared to control (linear 0.05). However, certain volatile compounds (benzene and toluene) and 10-18:1 fatty acid, known potential hazards for human health, were increased in meat from lambs fed TMR with SS. For this reason, only inclusion rates up to 15 g SS/kg TMR seem to sustain a satisfactory balance between beneficial and detrimental effects on lamb meat composition and quality.

Exact two-loop vacuum polarization correction to the Lamb shift in hydrogenlike ions

International Nuclear Information System (INIS)

Plunien, G.; Beier, T.; Soff, G.

1998-01-01

We present a calculation scheme for the two-loop vacuum polarization correction of order α 2 to the Lamb shift of hydrogenlike high-Z atoms. The interaction with the external Coulomb field is taken into account to all orders in (Zα). By means of a modified potential approach the problem is reduced to the evaluation of effective one-loop vacuumpolarization potentials. An expression for the energy shift is deduced within the framework of partial wave decomposition performing appropriate subtractions. Exact results for the two-loop vacuum polarization contribution to the Lamb shift of K- and L-shell electron states in hydrogenlike lead and uranium are presented. (orig.)

Radiographic diagnosis of hereditary chondrodysplasia in newborn lambs

International Nuclear Information System (INIS)

Vanek, J.A.; Walter, P.A.; Alstad, A.D.

1989-01-01

Normal appearing Suffolk lambs affected with hereditary chondrodysplasia (HC) and normal appearing unaffected lambs were radiographed at birth, and at 2, 4, and 8 weeks of age. In affected lambs, lesions were seen consistently in the elbows, shoulders, sternum, and spine. Similar lesions were not identified in unaffected lambs. A malformed Corriedale lamb was radiographed to compare its lesions to those seen in HC. The Corriedale lamb had islands of ossification of the anconeal process similar to those identified in lambs with signs of HC at birth. The islands of ossification seen in the Corriedale lamb were fused by 2 months of age, whereas elbow lesions seen in lambs with HC increased in severity during the same period

Techniques for capturing bighorn sheep lambs

Science.gov (United States)

Smith, Joshua B.; Walsh, Daniel P.; Goldstein, Elise J.; Parsons, Zachary D.; Karsch, Rebekah C.; Stiver, Julie R.; Cain, James W.; Raedeke, Kenneth J.; Jenks, Jonathan A.

2014-01-01

Low lamb recruitment is a major challenge facing managers attempting to mitigate the decline of bighorn sheep (Ovis canadensis), and investigations into the underlying mechanisms are limited because of the inability to readily capture and monitor bighorn sheep lambs. We evaluated 4 capture techniques for bighorn sheep lambs: 1) hand-capture of lambs from radiocollared adult females fitted with vaginal implant transmitters (VITs), 2) hand-capture of lambs of intensively monitored radiocollared adult females, 3) helicopter net-gunning, and 4) hand-capture of lambs from helicopters. During 2010–2012, we successfully captured 90% of lambs from females that retained VITs to ≤1 day of parturition, although we noted differences in capture rates between an area of high road density in the Black Hills (92–100%) of South Dakota, USA, and less accessible areas of New Mexico (71%), USA. Retention of VITs was 78% with pre-partum expulsion the main cause of failure. We were less likely to capture lambs from females that expelled VITs ≥1 day of parturition (range = 80–83%) or females that were collared without VITs (range = 60–78%). We used helicopter net-gunning at several sites in 1999, 2001–2002, and 2011, and it proved a useful technique; however, at one site, attempts to capture lambs led to lamb predation by golden eagles (Aquila chrysaetos). We attempted helicopter hand-captures at one site in 1999, and they also were successful in certain circumstances and avoided risk of physical trauma from net-gunning; however, application was limited. In areas of low accessibility or if personnel lack the ability to monitor females and/or VITs for extended periods, helicopter capture may provide a viable option for lamb capture.

Temporal change in shallow subsurface P- and S-wave velocities and S-wave anisotropy inferred from coda wave interferometry

Science.gov (United States)

Yamamoto, M.; Nishida, K.; Takeda, T.

2012-12-01

Recent progresses in theoretical and observational researches on seismic interferometry reveal the possibility to detect subtle change in subsurface seismic structure. This high sensitivity of seismic interferometry to the medium properties may thus one of the most important ways to directly observe the time-lapse behavior of shallow crustal structure. Here, using the coda wave interferometry, we show the co-seismic and post-seismic changes in P- and S-wave velocities and S-wave anisotropy associated with the 2011 off the Pacific coast of Tohoku earthquake (M9.0). In this study, we use the acceleration data recorded at KiK-net stations operated by NIED, Japan. Each KiK-net station has a borehole whose typical depth is about 100m, and two three-component accelerometers are installed at the top and bottom of the borehole. To estimate the shallow subsurface P- and S-wave velocities and S-wave anisotropy between two sensors and their temporal change, we select about 1000 earthquakes that occurred between 2004 and 2012, and extract body waves propagating between borehole sensors by computing the cross-correlation functions (CCFs) of 3 x 3 component pairs. We use frequency bands of 2-4, 4-8, 8-16 Hz in our analysis. Each averaged CCF shows clear wave packets traveling between borehole sensors, and their travel times are almost consistent with those of P- and S-waves calculated from the borehole log data. Until the occurrence of the 2011 Tohoku earthquake, the estimated travel time at each station is rather stable with time except for weak seasonal/annual variation. On the other hand, the 2011 Tohoku earthquake and its aftershocks cause sudden decrease in the S-wave velocity at most of the KiK-net stations in eastern Japan. The typical value of S-wave velocity changes, which are measured by the time-stretching method, is about 5-15%. After this co-seismic change, the S-wave velocity gradually recovers with time, and the recovery continues for over one year following the

Urea utilization in growing lambs. 6

International Nuclear Information System (INIS)

Ulbrich, M.; Nikitin, S.; Geissler, C.; Hoffmann, M.

1988-01-01

Lambs aged 2 or 4 months and of an average live weight of 14.7 and 27.4 kg, resp., received rations consisting of 44% cereals, 46% dried sugar beet pulp, 6% wheat starch, 2% urea and 2% mineral-vitamin mixture. The crude protein content was 17.1 and 15.9%, resp., in the dry matter, that of natively crude protein 10.6 and 9.4%, resp. During a 6-day N balance period 8 and 16 g 15 N-urea resp. with a 15 N excess ( 15 N') of 9.26 and 9.40 atom-% were fed orally instead of commercial feeding urea. There were no significant differences between the two age groups with regard to the digestibility of the organic matter and the crude nutrients. The average N balance of 372 ± 85 mg/kg LW 0.75 /day were in the intermediate range of N retention capacity and accounted for 26 ± 5% of the consumed N. N retention in per cent. was slightly lower in younger lambs. Projections of urea utilization in a quasi stationary state resulted in an efficiency of the utilization of 33 ± 4%. The cutting up of the lambs at the end of the main period showed between 0.02 and 0.22 atom-% 15 N' in the total N, TCA precipitable N and amino acid N of the meat. At between 0.24 and 0.38 atom-% 15 N' they were highest in the heart and jaw muscles. The quota of 15 N' amounts found in the total N of the meat were 10.6 ± 3% of the 15 N intake and 20.1 ± 5.1% of the 15 N'amount remaining in the body. The bones contained 7.7 ± 1.7% and the fleece 7.9 ± 3.1% of the 15 N' intake. Total N and urea utilization was slightly lower in younger lambs than in older ones. (author)

Coding and quantification of a facial expression for pain in lambs.

Science.gov (United States)

Guesgen, M J; Beausoleil, N J; Leach, M; Minot, E O; Stewart, M; Stafford, K J

2016-11-01

human observers scored the images from Experiment II. Changes in facial action units were also quantified objectively by a researcher using image measurement software. In both experiments LGS scores were analyzed using a linear MIXED model to evaluate the effects of tail docking on observers' perception of facial expression changes. Kendall's Index of Concordance was used to measure reliability among observers. In Experiment I, human observers were able to use the LGS to differentiate docked lambs from control lambs. LGS scores significantly increased from before to after treatment in docked lambs but not control lambs. In Experiment II there was a significant increase in LGS scores after docking. This was coupled with changes in other validated indicators of pain after docking in the form of pain-related behaviour. Only two components, Mouth Features and Orbital Tightening, showed significant quantitative changes after docking. The direction of these changes agree with the description of these facial action units in the LGS. Restraint affected people's perceptions of pain as well as quantitative measures of LGS components. Freely moving lambs were scored lower using the LGS over both periods and had a significantly smaller eye aperture and smaller nose and ear angles than when they were held. Agreement among observers for LGS scores were fair overall (Experiment I: W=0.60; Experiment II: W=0.66). This preliminary study demonstrates changes in lamb facial expression associated with pain. The results of these experiments should be interpreted with caution due to low lamb numbers. Copyright © 2016 Elsevier B.V. All rights reserved.

Concentrate supplementation strategies in ryegrass pasture for productive performance in lambs

International Nuclear Information System (INIS)

Santos, S.K.; Falbo, M.K.; Sandini, I.E.; Pacentchuk, F.; Neumann, M.; Garbossa, G.

2018-01-01

This study evaluated the effect of two concentrate supplementation strategies on performance, metabolic profile and economic evaluation of suckling lambs and ewes in ryegrass (Lolium multiflorum) pasture. Twenty-seven ewes and 45 lambs were divided into three groups: (1) ryegrass pasture without supplementation - control (CON); (2) CON plus supplemented ewes and lambs at 1% of live weight (SEL), and (3) CON plus creep feeding supplemented lambs at 1% of live weight (CSL). Concentrate use increased (p<0.05) average daily gain (ADG) by 19.95% over CON (21.6 and 18.3% for SEL and CSL, respectively). Concentrate use contributed to minimizing forage quality fluctuation and provided greater ADG stability, mainly when ryegrass nutritional content and digestibility decreased. Blood metabolites profiles did not differ between groups, with exception of phosphorus which was higher for CON than SEL, and calcium which was higher for CSL than CON (p<0.05). Compared to CON, stoking rate values were greater to SEL (p<0.05). Compared to CSL, ewe and total stocking rate were greater (p<0.05) to SEL. Considering the control group as break even feed investment, SEL strategy had a positive economic return, while CSL showed economic losses. Concentrate use increased ADG of lambs and decrease the impact of nutrient quality changes of forage on daily gains, but must be considered that supplemental strategy used could affect negatively economic return.

Effect of feeding Mucuna pruriens on helminth parasite infestation in lambs.

Science.gov (United States)

Huisden, C M; Adesogan, A T; Gaskin, J M; Courtney, C H; Raji, A M; Kang, T

2010-02-17

Mucuna pruriens is a tropical legume anecdotally reputed to have anthelmintic properties. This study was conducted to examine the validity of such claims. The aim of this study was to determine if ingestion of Mucuna seeds reduces helminth parasite infestation in lambs. Thirty-six Dorper x Katahdin ram lambs were assigned to three treatments, a cottonseed meal based control diet, a diet in which Mucuna replaced cottonseed meal and the control diet with levamisole (7.5mg/kg body weight) administration. All diets were isonitrogenous and isocaloric. The 12 lambs in each treatment were assigned randomly to 4 pens, each containing 3 lambs. Lambs were trickle infected three times per week by gavage with infectious Haemonchus contortus larvae (2000 larvae/lamb) for 3 weeks. Levamisole treatment decreased fecal egg counts by 87% and abomasal worm counts by 83%. Mucuna intake did not statistically affect fecal egg counts or abomasal worm counts, though numerical (P>0.10) reductions of 7.4% and 18.1%, respectively were evident. Anemia indicators, feed intake, and lamb growth were unaffected by treatment. Levamisole reduced the Haemonchus parasite burden in lambs significantly but feeding Mucuna reduced the burden by levels unlikely to eliminate the clinical effects of parasitism. Copyright 2009 Elsevier Ireland Ltd. All rights reserved.

Low pasture allowance until late gestation in ewes: behavioural and physiological changes in ewes and lambs from lambing to weaning.

Science.gov (United States)

Freitas-de-Melo, A; Ungerfeld, R; Hötzel, M J; Orihuela, A; Pérez-Clariget, R

2017-02-01

Low pasture allowance during gestation affects ewes' BW at parturition, the bond with their lamb, lamb development, and thus also may affect their responses to weaning. The objectives were to determine if native pasture allowance from before conception until late pregnancy affects ewe-lamb behaviours at lambing, ewes' milk yield, lambs' BW, and the behavioural and physiological changes of ewes and lambs at weaning. From 23 days before conception until 122 days of pregnancy, 24 ewes grazed on two different native pasture allowances: high (10 to 12 kg of dry matter (DM)/100 kg of BW per day; HPA treatment; n=12) or low (5 to 8 kg of DM/100 kg of BW per day; LPA treatment; n=12). Thereafter, all ewes grazed on Festuca arundinacea and received rice bran and crude glycerine. Ewes' body condition score (BCS) and BW were recorded during pregnancy and postpartum periods. Milk yield was determined on days 32, 41 and 54 after lambing. Lambs' BW was recorded from birth until 72 days after lambing. Latency from parturition until the ewe licked her lamb, maternal behaviour score (a test that evaluates maternal attachment to the lamb) and latency for lamb to stand up and suckle were determined. The behaviour of the lambs and ewes was recorded before and after weaning (at 65 days). The ewes' serum total protein, albumin and globulin concentrations were measured before and after weaning. The HPA ewes presented greater BW (Pewes during pregnancy and postpartum (Pewes (Pewes' behavioural and physiological changes at weaning. HPA lambs paced and vocalized more than LPA lambs (Pewes' BW, BCS and milk production were affected by pasture allowance until late pregnancy, this did not affect the behaviours that lead to the establishment of the mother-young bond, nor the ewes' behavioural responses at weaning. Lambs reared by ewes that grazed on low pasture allowance during pregnancy presented fewer behavioural changes and a lower decrease of albumin concentration after weaning. Lambs' BW

A New Omni-Directional EMAT for Ultrasonic Lamb Wave Tomography Imaging of Metallic Plate Defects

Directory of Open Access Journals (Sweden)

Songling Huang

2014-02-01

Full Text Available This paper proposes a new omni-directional electromagnetic acoustic transducer (EMAT for the ultrasonic Lamb wave (ULW tomography imaging (TI of defects in metallic plates. The proposed EMAT is composed of a permanent magnet and a coil with a contra-flexure structure. This new EMAT coil structure is used for omni-directional ULW transmission and reception and ULW TI for the first time. The theoretical background and the working principles of this EMAT are presented and analyzed. The experimental results of its use on a 3 mm thick aluminum plate indicate that the EMAT with a contra-flexure coil (CFC can transmit and receive a pure single A0 mode ULW with a high signal-to-noise ratio (SNR. Thus, the extraction of the projection data used for ULW TI may be performed accurately. The circumferential consistency of the projection data is only slightly influenced by the distortion of the eddy current field that is induced by the new CFC with an irregular shape. When the new EMAT array is used for ULW TI using the cross-hole method and SIRT arithmetic, a desirable imaging quality can be achieved, and the estimated size of an artificial corrosion defect agreed well with its actual value. The relation between the reconstruction resolution and the number of the new EMATs used is analyzed. More TI experiments are carried out when the aluminum plate defect is in two different locations relative to the EMAT array, for the further investigation of the performances of the new EMATs.

THE EFFECT OF PRODUCTION SYSTEM INFORMATION ON CONSUMER EXPECTATION AND ACCEPTABILITY OF LECCESE LAMB MEAT

Directory of Open Access Journals (Sweden)

G. Martemucci

2010-01-01

Full Text Available Twenty lamb meat’s habitual consumers (eight females and twelve males, from 25 to 62 yrs of age took part in a centrallocation test, organised to assess consumers’ expectations generated by information on animal feeding system, lambs fedwith maternal milk from mothers reared on grass (T1 versus lambs fed with maternal milk from mothers reared on stall(T2, and to assess the effect of this knowledge on the hedonic ratings of lamb meat from the Leccese breed. Using anone-point hedonic scale, first blind and then informed scores were collected on two types of Leccese meat. The blind testprovided information which was different from informed test; in fact, T2 meat receiving higher hedonic scores than T1 meat. Onthe contrary, with the label information on animal feeding system, meat from T1 lambs was liked more than meat from T2lambs. The lamb meat’s habitual consumers showed a higher interest in extrinsic quality attributes which referred to the origin orproduction system.

Effect of exogenous cellulase enzyme on feed digestibility in lamb

International Nuclear Information System (INIS)

Boonek, Lerchat; Shinkoi, Henrry S; Piadang, Nattayana

2006-09-01

The aim of this study was to determine the effect of exogenous enzyme on digestibility and N retention in lamb. Eight lambs were randomly allocated to 2 experiment group in group comparison design trial. Experimental treatments were: 1) CTL (No enzyme) and 2 50NZ (Mixed enzyme with high cellulase at 50g/100kg.feed). The digestibility study showed that Exogenous enzyme increased (P<0.05) dry matter and crude protein digestibility of treated lamb compared to those of control. A similar trend (P=0.11) was observed for the NDF digestibility. Mean values for dry matter digestibility were 57.86 and 69.83% and for protein digestibility were 64.76 and 73.38%, for CTL and 50NZ, respectively). The N intake was similar among treatment, averaging 22.57g/head/day. Percent N retained of 50 NZ treated lambs was higher (P<.05) than those of CTL group (mean value were 47.74 and 59.07 for CTC and 50NZ, respectively). Feed efficiency or feed conversion ratio was numerically improved for enzyme-treated groups. Overall, the results of this study provide evidence that mixed cellulase enzyme can be used to improver performance of lambs as compare to non-enzyme diet.

The role of the environment in transmission of Dichelobacter nodosus between ewes and their lambs

Science.gov (United States)

Muzafar, Mohd; Calvo-Bado, Leo A.; Green, Laura E.; Smith, Edward M.; Russell, Claire L.; Grogono-Thomas, Rose; Wellington, Elizabeth M.H.

2015-01-01

Dichelobacter nodosus (D. nodosus) is the essential causative agent of footrot in sheep. The current study investigated when D. nodosus was detectable on newborn lambs and possible routes of transmission. Specific qPCR was used to detect and quantify the load of D. nodosus in foot swabs of lambs at birth and 5–13 h post-partum, and their mothers 5–13 h post-partum; and in samples of bedding, pasture, soil and faeces. D. nodosus was not detected on the feet of newborn lambs swabbed at birth, but was detected 5–13 h after birth, once they had stood on bedding containing naturally occurring D. nodosus. Multiple genotypes identified by cloning and sequencing a marker gene, pgrA, and by multi locus variable number tandem repeat analysis (MLVA) of community DNA from swabs on individual feet indicated a mixed population of D. nodosus was present on the feet of both ewes and lambs. There was high variation in pgrA tandem repeat number (between 3 and 21 repeats), and multiple MLVA types. The overall similarity index between the populations on ewes and lambs was 0.45, indicating moderate overlap. Mother offspring pairs shared some alleles but not all, suggesting lambs were infected from sources(s) other than just their mother's feet. We hypothesise that D. nodosus is transferred to the feet of lambs via bedding containing naturally occurring populations of D. nodosus, probably as a result of transfer from the feet of the group of housed ewes. The results support the hypothesis that the environment plays a key role in the transmission of D. nodosus between ewes and lambs. PMID:25953734

Environmental and genetic effects on growth in Timahdite and crossbred lambs in Morocco

Directory of Open Access Journals (Sweden)

M. El Fadili

2000-01-01

Full Text Available Knowledge of genetic parameters for growth traits of economic importance is required for the development of sheep populations in Morocco. Records on 544 lambs of the Timahdite (T breed and of 756 D'man x Timahdite (DT lambs, all born from 1992 to 1998, were used to estimate genetic parameters for lamb weights at birth, at 30, 70 and 90 days and daily gains from 10-30 days, 30-70 days and 30-90 days for each trait. Separate REML (covariance component estimates were obtained assuming animal models that included the fixed effects of birth year, sex, age of dam, birth type or rearing types and the interaction of birth year by sex, the animal direct genetic effect and the maternal genetic effect. Genetic and phenotypic correlations between traits were estimated with models including the same fixed effects and only additive direct genetic effects. All fixed effects influenced growth traits. The direct heritability estimates for the various body weight and daily gain traits were low to medium and varied between 0.07 and 0.25 in T, and between 0.02 and 0.18 in DT. Maternal heritability ranged from 0.20 to 0.36 in DT, and from 0.01 to 0.10 in T lambs, except for the birth weight (0.53. For all traits the direct and maternal genetic correlations were high and negative in DT (-0.80 and -1.00 and in T (-0.90 and -1.00 lambs. However, the accuracy of such estimates is low due to the small data set used in the present study. The estimates of genetic and phenotypic correlations were positive for all traits, they were particularly high for genetic correlations between weights and weight gains after birth, both in DT and T lambs, and they showed no genetic antagonisms among the growth traits.

16 CFR 301.8 - Use of terms “Persian Lamb,” “Broadtail Lamb,” and “Persian-broadtail Lamb” permitted.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Use of terms âPersian Lamb,â âBroadtail Lamb... Regulations § 301.8 Use of terms “Persian Lamb,” “Broadtail Lamb,” and “Persian-broadtail Lamb” permitted. (a) The term Persian Lamb may be used to describe the skin of the young lamb of the Karakul breed of sheep...

Transient space-time surface waves characterization using Gabor analysis

Energy Technology Data Exchange (ETDEWEB)

Martinez, L; Wilkie-Chancellier, N; Caplain, E [Universite de Cergy Pontoise, ENS Cachan, UMR CNRS 8029, Laboratoire Systemes et Applications des Techniques de l' Information et de l' Energie (SATIE), 5 mail Gay-Lussac, F 9500 Cergy-Pontoise (France); Glorieux, C; Sarens, B, E-mail: nicolas.wilkie-chancellier@u-cergy.f [Katholieke Universiteit Leuven, Laboratorium voor Akoestiek en Thermische Fysica (LATF), Celestijnenlaan 200D, B-3001 Leuven (Belgium)

2009-11-01

Laser ultrasonics allow the observation of transient surface waves along their propagation media and their interaction with encountered objects like cracks, holes, borders. In order to characterize and localize these transient aspects in the Space-Time-Wave number-Frequency domains, the 1D, 2D and 3D Gabor transforms are presented. The Gabor transform enables the identification of several properties of the local wavefronts such as their shape, wavelength, frequency, attenuation, group velocity and the full conversion sequence along propagation. The ability of local properties identification by Gabor transform is illustrated by two experimental studies: Lamb waves generated by an annular source on a circular quartz and Lamb wave interaction with a fluid droplet. In both cases, results obtained with Gabor transform enable ones to identify the observed local waves.

Effect of pressurization on helical guided wave energy velocity in fluid-filled pipes.

Science.gov (United States)

Dubuc, Brennan; Ebrahimkhanlou, Arvin; Salamone, Salvatore

2017-03-01

The effect of pressurization stresses on helical guided waves in a thin-walled fluid-filled pipe is studied by modeling leaky Lamb waves in a stressed plate bordered by fluid. Fluid pressurization produces hoop and longitudinal stresses in a thin-walled pipe, which corresponds to biaxial in-plane stress in a plate waveguide model. The effect of stress on guided wave propagation is accounted for through nonlinear elasticity and finite deformation theory. Emphasis is placed on the stress dependence of the energy velocity of the guided wave modes. For this purpose, an expression for the energy velocity of leaky Lamb waves in a stressed plate is derived. Theoretical results are presented for the mode, frequency, and directional dependent variations in energy velocity with respect to stress. An experimental setup is designed for measuring variations in helical wave energy velocity in a thin-walled water-filled steel pipe at different levels of pressure. Good agreement is achieved between the experimental variations in energy velocity for the helical guided waves and the theoretical leaky Lamb wave solutions. Copyright © 2016 Elsevier B.V. All rights reserved.

Observations on the alimentary tract of gnotobiotic lambs.

Science.gov (United States)

Lysons, R J; Alexander, T J; Wellstead, P D; Jennings, I W

1976-01-01

Seventeen gnotobiotic lambs were reared up to 21 weeks of age on cows' milk followed by sterile solid diets similar to diets fed to conventional lambs. Seven were inoculated with limited defined populations of rumen bacteria, seven were left uninoculated and three were dosed with rumen contents from conventional sheep ('conventionalised'). Seven naturally-born lambs were reared for purposes of comparison. As with other species of gnotobiotic animals, both the inoculated and the uninoculated gnotobiotic lambs had small, poorly developed lymph nodes, soft colon contents and thin intestinal walls. Unlike other species the caeca of gnotobiotic lambs were of normal size. The overall size of the reticulo-rumen including contents relative to body weight was similar in gnotobiotic and conventional lambs. However, macroscopically, the musculature of the rumen seemed to be poorly developed and histological studies showed hypoplasia of the muscle tissue of both the rumen and reticulum. Rumination was noted only infrequently in gnotobiotic lambs. The epithelium of the rumen and reticulum of the uninoculated gnotobiotic lambs was similar to that of neonatal lambs, but there was normal development of papillae in gnotobiotic lambs inoculated with limited defined populations of rumen bacteria and in conventionalised lambs. Degenerative changes were observed histologically in some of the organs of gnotobiotic lambs which were consistent with nutritional deficiencies.

Is the Lamb shift chemically significant?

Science.gov (United States)

Dyall, Kenneth G.; Bauschlicher, Charles W., Jr.; Schwenke, David W.; Pyykko, Pekka; Arnold, James (Technical Monitor)

2001-01-01

The contribution of the Lamb shift to the atomization energies of some prototype molecules, BF3, AlF3, and GaF3, is estimated by a perturbation procedure. It is found to be in the range of 3-5% of the one-electron scalar relativistic contribution to the atomization energy. The maximum absolute value is 0.2 kcal/mol for GaF3. These sample calculations indicate that the Lamb shift is probably small enough to be neglected for energetics of molecules containing light atoms if the target accuracy is 1 kcal/mol, but for higher accuracy calculations and for molecules containing heavy elements it must be considered.

Ground Juniperus pinchotii and urea in supplements fed to Rambouillet ewe lambs Part 2: Ewe lamb rumen microbial communities.

Science.gov (United States)

Ishaq, S L; Yeoman, C J; Whitney, T R

2017-10-01

This study evaluated effects of ground redberry juniper () and urea in dried distillers grains with solubles-based supplements fed to Rambouillet ewe lambs ( = 48) on rumen physiological parameters and bacterial diversity. In a randomized study (40 d), individually-penned lambs were fed ground sorghum-sudangrass hay and of 1 of 8 supplements (6 lambs/treatment; 533 g/d; as-fed basis) in a 4 × 2 factorial design with 4 concentrations of ground juniper (15%, 30%, 45%, or 60% of DM) and 2 levels of urea (1% or 3% of DM). Increasing juniper resulted in minor changes in microbial β-diversity (PERMANOVA, pseudo F = 1.33, = 0.04); however, concentrations of urea did not show detectable broad-scale differences at phylum, family, or genus levels according to ANOSIM ( > 0.05), AMOVA ( > 0.10), and PERMANOVA ( > 0.05). Linear discriminant analysis indicated some genera were specific to certain dietary treatments ( < 0.05), though none of these genera were present in high abundance; high concentrations of juniper were associated with and , low concentrations of urea were associated with , and high concentrations of urea were associated with and . were decreased by juniper and urea. , , and increased with juniper and were positively correlated (Spearman's, < 0.05) with each other but not to rumen factors, suggesting a symbiotic interaction. Overall, there was not a juniper × urea interaction for total VFA, VFA by concentration or percent total, pH, or ammonia ( 0.29). When considering only percent inclusion of juniper, ruminal pH and proportion of acetic acid linearly increased ( < 0.001) and percentage of butyric acid linearly decreased ( = 0.009). Lamb ADG and G:F were positively correlated with (Spearman's, < 0.05) and negatively correlated with Synergistaceae, the BS5 group, and Lentisphaerae. Firmicutes were negatively correlated with serum urea nitrogen, ammonia, total VFA, total acetate, and total propionate. Overall, modest differences in bacterial diversity among

Measurement of the 1S-2S frequency in atomic hydrogen

International Nuclear Information System (INIS)

Hildum, E.A.

1986-01-01

A first precise measurement of the 1S-2S energy interval in atomic hydrogen was obtained by observing the 1S-2S transition in an atomic beam by pulsed Doppler-free two-photon spectroscopy and using an interferometrically calibrated line of 130 Te 2 at 486 nm as the references. The measured 1S-2S frequency is 2,466,061 395.6(4.9)MHz. With the calculated 1S Lamb shift, the 1S-2S frequency yields a value for the Rydberg constant, R/sub ∞/ = 109,737.314 92(22) cm -1 , which is not in good agreement with the most recent previously measured value, 109,737.315 44(11) cm -1 , obtained by S.R. Amin et al. It is, however, in good agreement with a previous Rydberg value, 109,737.315 04(32) cm -1 , measured by J.E.M. Goldsmith. If the Rydberg constant is taken as given, the 1S-2S frequency determines a value for the 1S Lamb shift. With Amin's Rydberg, the measured Lamb shift is 8161.0(5.4) MHz, in poor agreement with the theoretical value of 8149.43(8) MHz. With Goldsmith's Rydberg, the measurement Lamb shift is 8151.0(8.7) MHz, in good agreement with theory

Meat quality of suckling lambs supplemented with contents of crude glycerin in creep feeding

Directory of Open Access Journals (Sweden)

Ana Carolina Ribeiro Sanquetta de Pellegrin

2014-10-01

Full Text Available The objective of this research was to evaluate the effect of crude glycerin in the supplement provided in creep feeding on the physico-chemical and sensory characteristics of meat from suckling lambs kept in pasture ryegrass. Thirty two suckling lambs, sixteen male and sixteen female, were distributed into 4 diets with different concentrations of crude glycerin: 0, 10, 20 and 30% crude glycerin, in the replacement of corn, in the isoproteic supplement (18% CP provided daily in amounts equivalent to 2% of body weight. The experimental design was randomized blocks, with each variable data submitted to analysis of variance at 5% significance and the significant results subjected to regression analysis. There was no effect (P>0,05 of contents of crude glycerin on the chemical composition and cholesterol content of lamb meat. On the other hand, there was increased linearly (P>0,05 pH and cooking losses by the use of crude glycerin. No influence (P>0,05 of crude glycerin concentration on the texture profile analysis (TPA, sensorial analysis by triangular test and even when was evaluated attributes color, tenderness and juiciness of lamb meat. Up to 30% of crude glycerin in the supplement provided in creep feeding for suckling lambs grazing ryegrass do not compromise the physical-chemical and sensorial quality of the lamb meat.

Adult survival, apparent lamb survival, and body condition of desert bighorn sheep in relation to habitat and precipitation on the Kofa National Wildlife Refuge, Arizona

Science.gov (United States)

Overstreet, Matthew; Caldwell, Colleen A.; Cain, James W.

2014-01-01

The decline of desert bighorn sheep on the Kofa National Wildlife Refuge (KNWR) beginning in 2003 stimulated efforts to determine the factors limiting survival and recruitment. We 1) determined pregnancy rates, body fat, and estimated survival rates of adults and lambs; 2) investigated the relationship between precipitation, forage conditions, previous year’s reproductive success, and adult body condition; 3) assessed the relative influence of body condition of adult females, precipitation, and forage characteristics on apparent survival of lambs; and 4) determined the prevalence of disease. To assess the influence of potential limiting factors on female desert bighorn sheep on the KNWR, we modeled percent body fat of adult females as a function of previous year’s reproductive effort, age class, and forage conditions (i.e., seasonal NDVI and seasonal precipitation). In addition, we assessed the relative influence of the body condition of adult females, precipitation, and forage conditions (NDVI) on length of time a lamb was observed at heel.Adult female survival was high in both 2009 (0.90 [SE = 0.05]) and 2010 (0.96 [SE = 0.03]). Apparent lamb survival to 6 months of age was 0.23 (SE = 0.05) during 2009-2010 and 0.21 (SE = 0.05) during 2010-2011 lambing seasons. Mean body fat for adult females was 12.03% (SE = 0.479) in 2009-2010 and 11.11% (SE= 0.486) in 2010-2011 and was not significantly different between years. Pregnancy rate was 100% in 2009 and 97.5% in 2010.Models containing the previous year’s reproductive effort, spring NDVI and previous year’s reproductive effort and spring precipitation best approximated data on percent body fat in adult females in 2009-2010. In 2010-2011, the two highest-ranking models included the previous year’s reproductive effort and winter NDVI and previous year’s reproductive effort, and winter and spring NDVI. None of the models assessing the influence of maternal body fat, precipitation, or forage conditions were

Lamb shift in the muonic deuterium atom

Energy Technology Data Exchange (ETDEWEB)

Krutov, A. A.; Martynenko, A. P. [Samara State University, Pavlov street 1, 443011, Samara (Russian Federation); Samara State University, Pavlov Street 1, 443011, Samara, Russia and Samara State Aerospace University named after academician S.P. Korolyov, Moskovskoye Shosse 34, 443086, Samara (Russian Federation)

2011-11-15

We present an investigation of the Lamb shift (2P{sub 1/2}-2S{sub 1/2}) in the muonic deuterium ({mu}D) atom using the three-dimensional quasipotential method in quantum electrodynamics. The vacuum polarization, nuclear-structure, and recoil effects are calculated with the account of contributions of orders {alpha}{sup 3}, {alpha}{sup 4}, {alpha}{sup 5}, and {alpha}{sup 6}. The results are compared with earlier performed calculations. The obtained numerical value of the Lamb shift at 202.4139 meV can be considered a reliable estimate for comparison with forthcoming experimental data.

P-S & S-P Elastic Wave Conversions from Linear Arrays of Oriented Microcracks

Science.gov (United States)

Jiang, L.; Modiriasari, A.; Bobet, A.; Pyrak-Nolte, L. J.

2017-12-01

Natural and induced processes can produce oriented mechanical discontinuities such as en echelon cracks, fractures and faults. Previous research has shown that compressional to shear (P-S) wave conversions occur at normal incidence to a fracture because of cross-coupling fracture compliances (Nakagawa et al., 2000). Here, experiments and computer simulation are presented to demonstrate the link among cross-coupling stiffness, microcrack orientation and energy partitioning among P, S, and P-S/S-P waves. A FormLabs 2 3D printer was used to fabricate 7 samples (50 mm x 50 mm x 100 mm) with linear arrays of microcracks oriented at 0, 15, 30, 45, 60, 75, and 900 with a print resolution of 0.025 mm. The microcracks were elliptical in cross-sections (2 mm long by 1 mm wide), through the 50 mm thickness of sample, and spaced 3 mm (center-to-center for adjacent cracks). A 25 mm length of each sample contained no microcracks to act as a reference material. Broadband transducers (0.2-1.5 MHz) were used to transmit and receive P and polarized S wave signals that were propagated at normal incidence to the linear array of microcracks. P-wave amplitude increased, while S-wave amplitude remained relatively constant, as the microcrack orientation increased from 0o to 90o. At normal incidence, P-S and S-P wave conversions emerged and increased in amplitude as the crack inclination increased from 00 to 450. From 450 to 900, the amplitude of these converted modes decreased. Between negative and positive crack angles, the P-to-S and S-to-P waves were 1800 phase reversed. The observed energy partitioning matched the computed compliances obtained from numerical simulations with ABAQUS. The cross-coupling compliance for cracks inclined at 450 was found to be the smallest magnitude. 3D printing enabled the study of microstructural effects on macro-scale wave measurements. Information on the orientation of microcracks or even en echelon fractures and faults is contained in P-S conversions

Influence of wholesale lamb marketing options and merchandising styles on retail yield and fabrication time.

Science.gov (United States)

Lorenzen, C L; Martin, A M; Griffin, D B; Dockerty, T R; Walter, J P; Johnson, H K; Savell, J W

1997-01-01

Lamb carcasses (n = 94) from five packing plants, selected to vary in weight class and fat thickness, were used to determine retail yield and labor requirements of wholesale lamb fabrication. Carcasses were allotted randomly according to weight class to be fabricated as whole carcasses (n = 20), three-piece boxes (n = 22), or subprimals (n = 52). Processing times (seconds) were recorded and wholesale and retail weights (kilograms) were obtained to calculate retail yield. Subprimals were fabricated into bone-in retail cuts or boneless or semi-boneless retail cuts. Retail yield for subprimal lamb legs decreased from 85.3 +/- .6% for bone-in to 68.0 +/- .7% for a completely boneless retail product. Correspondingly, processing times increased from 126.1 +/- 5.4 s to 542.0 +/- 19.2 s for bone-in and boneless legs, respectively. For all subprimals, retail yield percentage tended to decrease and total processing time increase as cuts were fabricated to boneless or semi-boneless end points compared with a bone-in end point. Percentage retail yield did not differ (P > .05) among whole carcass, three-piece box, and subprimal marketing methods. Total processing time was shorter for subprimals (P < .05) than for the other two marketing methods.

Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: VIII. Quality measures of lamb longissimus dorsi.

Science.gov (United States)

Mousel, M R; Notter, D R; Leeds, T D; Zerby, H N; Moeller, S J; Taylor, J B; Lewis, G S

2014-07-01

Quality measures of lamb longissimus dorsi were evaluated in 514 crossbred wether lambs to assess sire breed differences. Wethers were produced over 3 yr from single-sire matings of 22 Columbia, 22 U.S. Meat Animal Research Center (USMARC)-Composite (Composite), 21 Suffolk, and 17 Texel rams to adult Rambouillet ewes. Lambs were reared to weaning in an extensive western rangeland production system and finished in a feedlot on a high-energy finishing diet. One of three harvest groups were randomly assigned to each lamb, and lambs were transported to The Ohio State University abattoir when the mean BW of wethers remaining in the feedlot reached 54.4, 61.2, or 68.0 kg. After harvest, subjective lean quality scores were assigned and LM pH (immediately after and 24 h after harvest), color (quantified as Minolta L*, a*, and b*), intramuscular fat (IMF), cooking loss percentage, and Warner-Bratzler shear force (WBSF) were determined. Statistical models included fixed effects of sire breed, year of birth, and harvest group and random effects of sire (nested within sire breed and year) and maternal grandsire. Year and harvest group were significant (P 0.28). At comparable numbers of days on feed, Texel-sired wethers had the greatest (more desirable; P lambs were intermediate and Columbia-sired lambs had the lowest (less desirable). Minolta L* values were greater (P lambs, although this difference is not visually discernible by humans. No significant (P > 0.05) sire breed effects were detected for LM pH at or 24 h after harvest, Minolta a* and b*, IMF, percentage of cooking loss, and WBSF at comparable numbers of days on feed. At comparable chilled carcass weight, significant (P lambs had greater scores than Columbia- and Suffolk-sired lambs, but Composite-sired lambs did not differ from lambs sired by the other sire breeds. Sire breed effects were not detected (P > 0.15) for LM pH at or 24 h after harvest, Minolta L*, a*, and b*, cooking loss percentage, IMF, and WBSF at

Genetic evaluation of weaning weight and probability of lambing at 1 year of age in Targhee lambs

Science.gov (United States)

The objective of this study was to investigate genetic control of 120-day weaning weight and the probability of lambing at 1 year of age in Targhee ewe lambs. Records of 5,967 ewe lambs born from 1989 to 2012 and first exposed to rams for breeding at approximately 7 months of age were analyzed. Reco...

Statistical lamb wave localization based on extreme value theory

Science.gov (United States)

Harley, Joel B.

2018-04-01

Guided wave localization methods based on delay-and-sum imaging, matched field processing, and other techniques have been designed and researched to create images that locate and describe structural damage. The maximum value of these images typically represent an estimated damage location. Yet, it is often unclear if this maximum value, or any other value in the image, is a statistically significant indicator of damage. Furthermore, there are currently few, if any, approaches to assess the statistical significance of guided wave localization images. As a result, we present statistical delay-and-sum and statistical matched field processing localization methods to create statistically significant images of damage. Our framework uses constant rate of false alarm statistics and extreme value theory to detect damage with little prior information. We demonstrate our methods with in situ guided wave data from an aluminum plate to detect two 0.75 cm diameter holes. Our results show an expected improvement in statistical significance as the number of sensors increase. With seventeen sensors, both methods successfully detect damage with statistical significance.

Impacts of supplemental arginine on the reproductive performance of fall lambing ewes.

Science.gov (United States)

Crane, A R; Redden, R R; Van Emon, M L; Neville, T L; Reynolds, L P; Caton, J S; Schauer, C S

2016-08-01

In sheep, embryonic and fetal death during pregnancy can account for 25% to 50% of the total number of corpora lutea (and thus potential embryos). The objective of this study was to determine the effects of injectable and oral Arg supplementation provided for 14 d postbreeding on the reproductive performance of naturally stimulated fall lambing ewes. Rambouillet ewes ( = 210) were exposed to rams equipped with marking harnesses to induce cyclicity in April 2012. Upon estrus detection (d 0) ewes were randomly assigned, in a completely random design, to 1 of 6 treatments for a 14-d treatment period: injectable saline (CON; = 25), injectable Ala (IVALA; = 20), injectable Arg (IVARG; = 23), oral rumen-protected Arg (RPARG; = 20), oral fish meal (FM; = 24), or oral soybean meal (SBM; = 23). Daily treatments, except CON, IVALA, and SBM, were formulated to provide supplemental Arg at 30 mg·kg BW·d and were provided at 0800 h daily. Ewes receiving injectable treatments were provided 454 g corn/d postinjection, whereas ewes receiving oral supplements were provided a ground ration of their respective treatments with corn individually at 0800 h daily. Plasma and serum samples were collected on d 0, 2, 4, 6, 8, 10, 12, and 14 from 12 ewes per treatment to evaluate plasma progesterone and serum AA concentrations. At lambing, birth weight, birth type, and sex were recorded. Weaning weights were recorded when the average age of lambs was 85 d. No differences ( ≥ 0.39) were detected for pregnancy, prolificacy, and lambing rates or lamb birth weights among treatments. However, litter weaning weight tended to be greater ( = 0.06) and weaning rates were greater ( = 0.05) in Arg-injected ewes (1.09, 0.95, 1.29, 0.72, 1.00, and 0.86, respectively). Plasma progesterone and serum Arg concentrations showed a treatment and day effect ( < 0.001), but no treatment × day interaction ( ≥ 0.99) was observed. In contrast to previous research, supplemental Arg during the first 14 d of

The Peano-series solution for modeling shear horizontal waves in piezoelectric plates

Directory of Open Access Journals (Sweden)

Ben Ghozlen M.H.

2012-06-01

Full Text Available The shear horizontal (SH wave devices have been widely used in electroacoustic. To improve their performance, the phase velocity dispersion and the electromechanical coupling coefficient of the Lamb wave should be calculated exactly in the design. Therefore, this work is to analyze exactly the Lamb waves polarized in the SH direction in homogeneous plate pie.zoelectric material (PZT-5H. An alternative method is proposed to solve the wave equation in such a structure without using the standard method based on the electromechanical partial waves. This method is based on an analytical solution, the matricant explicitly expressed under the Peano series expansion form. Two types of configuration have been addressed, namely the open circuited and the short circuited. Results confirm that the SH wave provides a number of attractive properties for use in sensing and signal processing applications. It has been found that the phase velocity remains nearly constant for all values of h/λ (h is the plate thickness, λ the acoustic wavelength. Secondly the SH0 wave mode can provide very high electromechanical coupling. Graphical representations of electrical and mechanical amounts function of depth are made, they are in agreement with the continuity rules. The developed Peano technique is in agreement with the classical approach, and can be suitable with cylindrical geometry.

Meta-analysis of lamb birth weight as influenced by pregnancy nutrition of multiparous ewes.

Science.gov (United States)

Roca Fraga, Fernando J; Lagisz, Malgorzata; Nakagawa, Shinichi; Lopez-Villalobos, Nicolas; Blair, Hugh; Kenyon, Paul

2018-02-28

Across the literature there is large variation in lamb birth weight responses to changes in the ewe pregnancy nutrition. Much of this heterogeneity has been attributed to several factors inherent to each experiment, however, the relative contribution of these experimental factors has not yet been quantified. This meta-analysis aimed to systematically review the variation in lamb birth weight responses across nutritional studies involving adult multiparous ewes. Effect sizes for individual studies were estimated using the unbiased estimator Hedges' g, whereby, positive and negative values indicate heavier and lighter treatment lambs vs. controls, respectively. Heterogeneity varied between early-, mid- and late-pregnancy undernutrition studies (I2total [early-pregnancy] = 19.90%, I2total [mid-pregnancy] = 52.10%, I2total [late-pregnancy] = 68.70%). The small average effects for early- (0.04, Highest Posterior Density (HPD) interval = -0.22 , 0.28) and mid-pregnancy undernutrition (-0.15, HPD interval = -0.35 , 0.05) suggest that if farmers anticipate a potential feed shortage, ewes can be allowed to lose weight providing nutrition is resumed to adequate levels later in pregnancy. On the contrary, late-pregnancy undernutrition was associated with a significant decrease in lamb birth weight (-0.72, HPD interval = -0.86 , -0.55). Thus, management practices should focus on ensuring adequate nutrition in late-pregnancy. Increasing lamb birth weight could be possible by feeding ewes above their pregnancy maintenance requirement (0.23, HPD interval = 0.002 , 0.48), though the number of studies is limited and further research is needed.

Evaluation of Rambouillet, Polypay, and Romanov-White Dorper × Rambouillet ewes mated to terminal sires in an extensive rangeland production system: Lamb production.

Science.gov (United States)

Notter, D R; Mousel, M R; Lewis, G S; Leymaster, K A; Taylor, J B

2017-09-01

Ewe productivity (i.e., total number or weight of lambs weaned per breeding ewe) is a key indicator of lamb production efficiency. This study compared various measures of ewe productivity and ewe and lamb performance among ewes of 3 breed types mated to rams of 4 terminal-sire breed types in an extensive rangeland production system. Purebred Rambouillet ( = 212), purebred Polypay ( = 236), and crossbred Romanov-White Dorper × Rambouillet (RW-RA; = 231) ewes were produced from locally adapted Polypay and Rambouillet ewes and then annually mated to Columbia, Suffolk, Columbia × Suffolk, or Suffolk × Columbia sires for up to 4 yr, beginning at 1 yr of age. The cumulative number and weight of lambs weaned through 4 yr were greater for RW-RA (5.9 lambs and 153 kg, respectively) and Polypay ewes (4.9 lambs and 123 kg, respectively) than for Rambouillet ewes (2.9 lambs and 99 kg, respectively) and also were greater for RW-RA ewes than for Polypay ewes (all ewes, compared with Rambouillet ewes, was driven by greater lambing rates (ewes lambing per ewe exposed) as ewe lambs (87 and 77 vs. 31%, respectively; ewe lambs (1.3, 1.3, and 1.0, respectively) and adult ewes (2.1, 2.0, and 1.6, respectively). The RW-RA ewes also had greater longevity ( ewes. Lamb BW at birth and weaning in adult ewes favored less-prolific Rambouillet ewes ( ewe breed types were small and not significant ( = 0.08). Effects of sire breed type on measures of cumulative ewe productivity were not significant ( > 0.74), but Suffolk-sired lambs had the heaviest adjusted birth weights ( = 0.01) and Columbia-sired lambs tended to have the lightest adjusted weaning weights ( = 0.12). Combined effects of heterosis and additive breed effects were associated with greater lambing rates in ewe lambs, larger litters at all ages, and substantially greater number and weight of lambs weaned for Polypay and RW-RA ewes than for Rambouillet ewes.

Qualitative characteristics of hamburgers and koftas produced from meat of lambs fed glycerine

Directory of Open Access Journals (Sweden)

T. H. Borghi

2016-12-01

Full Text Available The objective of this study was to evaluate the qualitative (pH, color, water activity, water retention capacity, cooking loss, and shear force and sensory characteristics of processed meat produced from less noble cuts of the carcasses of lambs fed diets containing sugarcane as roughage and concentrates with and without 10 and 20% glycerine. Neck and rib meat of 30 lambs slaughtered at a body weight of 32.0 ± 0.2 kg was used for the elaboration of hamburgers and koftas. Except for color, the inclusion of glycerine in the lamb diet did not influence (P>0.05 the qualitative traits evaluated. The inclusion of glycerine reduced the redness (from 10.07 to 8.89, P=0.044 and yellowness (from 5.97 to 5.07, P=0.039 of hamburgers. The same effect was observed for the redness (from 10.83 to 9.61, P=0.031 and yellowness (from 5.86 to 5.12, P=0.047 of koftas. The sensory characteristics evaluated were not influenced (P>0.05 and the grades of overall acceptance ranged from 7.4 to 7.9. The inclusion of glycerine in the diet of lambs altered the color of processed meat products, but provided satisfactory sensory characteristics.

Mutagenicity of basic fractions derived from lamb and beef cooked by common household methods.

Science.gov (United States)

Barrington, P J; Baker, R S; Truswell, A S; Bonin, A M; Ryan, A J; Paulin, A P

1990-03-01

Mutagen production was examined in lamb and beef in relation to certain common household cooking methods. Mutagenicity was assessed, after extraction of the basic fraction of cooked meat samples, using Salmonella typhimurium strain TA1538 with added rat-liver S-9 homogenate. Little or no mutagenicity was found in barbecued lamb chops, in microwave-cooked lamb chops, sirloin steak, leg of lamb, or rolled beef loaf, in roasted leg of lamb or rolled beef loaf, in stewed blade steak or in boiled chuck steak. However, the basic fraction from well-done, edible fried or grilled meat contained mutagenic activity equivalent to approximately 30,000 TA1538 revertants/100 g cooked meat. It was found tht the mutagenic activity of grilled lamb chops, sirloin and rump steaks was directly related to the average surface temperatures attained during cooking. Use of butter as a frying medium was particularly associated with higher mutagenicity in meat samples. Fried meats (rump and fillet steaks) generally yielded higher mutagenic activity than did grilled meats (rump steak, lamb chops) at comparable temperatures of the cooking medium. Using similar cooking procedures, lamb did not differ markedly from beef in mutagenic activity.

Nonlinear attenuation of S-waves and Love waves within ambient rock

Science.gov (United States)

Sleep, Norman H.; Erickson, Brittany A.

2014-04-01

obtain scaling relationships for nonlinear attenuation of S-waves and Love waves within sedimentary basins to assist numerical modeling. These relationships constrain the past peak ground velocity (PGV) of strong 3-4 s Love waves from San Andreas events within Greater Los Angeles, as well as the maximum PGV of future waves that can propagate without strong nonlinear attenuation. During each event, the shaking episode cracks the stiff, shallow rock. Over multiple events, this repeated damage in the upper few hundred meters leads to self-organization of the shear modulus. Dynamic strain is PGV divided by phase velocity, and dynamic stress is strain times the shear modulus. The frictional yield stress is proportional to depth times the effective coefficient of friction. At the eventual quasi-steady self-organized state, the shear modulus increases linearly with depth allowing inference of past typical PGV where rock over the damaged depth range barely reaches frictional failure. Still greater future PGV would cause frictional failure throughout the damaged zone, nonlinearly attenuating the wave. Assuming self-organization has taken place, estimated maximum past PGV within Greater Los Angeles Basins is 0.4-2.6 m s-1. The upper part of this range includes regions of accumulating sediments with low S-wave velocity that may have not yet compacted, rather than having been damaged by strong shaking. Published numerical models indicate that strong Love waves from the San Andreas Fault pass through Whittier Narrows. Within this corridor, deep drawdown of the water table from its currently shallow and preindustrial levels would nearly double PGV of Love waves reaching Downtown Los Angeles.

Consumer attitudes to selected lamb cuts.

Science.gov (United States)

Hopkins, D L; Pirlot, K L; Gittins, R

1992-01-01

Analysis of responses by 151 people to five questions about meat and, in particular, lamb, showed that consumption of lamb on a weekly basis varied widely between consumers. There was some evidence that people who produce their own meat have a higher consumption of lamb than those who do not. A clear preference for either traditional or alternative lamb cuts according to the sex of the respondent was not found. Overall 60% of respondents preferred bone-in as opposed to bone-out leg, 72% preferred midloin to valentine chops and 73% preferred bone-out as opposed to bone-in forequarters. Copyright © 1992. Published by Elsevier Ltd.

Carcass and meat traits of Morada Nova, Santa Ines and ½ Ile de France ½ Texel lambs finished in feedlot

Directory of Open Access Journals (Sweden)

Juliano Issakowicz

2014-03-01

Full Text Available The aim of this study was to evaluate the carcass and meat traits of Morada Nova, Santa Ines and ½ Ile de France ½ Texel lambs finished in feedlot. Weight and proportion of meatcuts, measures of carcass size and color, tenderness, cooking loss and ultimate pH of meat from 10 Morada Nova, 6 Santa Ines and 10 ½ Ile de France ½ Texel were evaluated. The lambs were finished in collective pens, fed ad libitum with 50% corn silage and 50% concentrate and slaughtered at about six months old. Analysis of variance was performed by the procedure PROC GLM of SAS (SAS Inst., Inc., Cary, NC and means were compared by Tukey test at 5% significance. The Morada Nova lambs had values of 14.1 kg, 13.9 kg, 0.240 kg/cm, 56.2 cm and 35.8 cm for hot and cold carcass weight, compactness index, hip and leg circumference respectively and these values were lower (P <0.05 to values observed in Santa Ines (19.4 kg, 18.8 kg, 0.283 cm/kg, 64.6 cm and 40.0 cm and in ½ Ile de France ½ Texel (18.6 kg, 18.2 kg, 0.305 cm/kg; 65.4 cm and 41.6 cm lambs. The hot and cold carcass yield did not differ (P> 0.05 among genetic groups. The scores for conformation and fat cover were higher (P <0.05 in ½ Ile de France ½ Texel lambs (2.4 and 3.0 and the carcass length was greater in Santa Ines lambs (66.3 cm. The ½ Ile de France ½ Texel lambs had smaller (P<0.05 proportion of neck and greater of leg (9.10% and 33.1% compared to Morada Nova lambs (10.3% and 30.4% and Santa Inês (10.9% and 31.6%. The weight of shoulder, leg, rack, ribs and flank was lower (P<0.05 in Morada Nova (1.306, 2.127 kg, 0.999 kg, 0.775 kg and 0.433 kg respectively compared to Santa Inês (1.820 kg, 2.972 kg, 1.355 kg, 0.959 and 0.509 kg and ½ Ile de France ½ Texel (1.791 kg, 3.007 kg, 1.212 kg, 1.016 kg and 0.563 kg. The neck was heavier in Santa Ines (1.038 kg which differed (P <0.05 from the other genetic groups (0.725 kg for Morada Nova and 0.830 kg for ½ Ile de France x ½ Texel lambs. The ½ Ile de

Structure and Lamb shift of 2s1/2-2p3/2 levels in lithiumlike U89+ through neonlike U82+

International Nuclear Information System (INIS)

Beiersdorfer, P.; Knapp, D.; Marrs, R.E.; Elliott, S.R.; Chen, M.H.

1993-01-01

The first Doppler-shift-free crystal-spectrometer measurement of stationary highly stripped uranium ions from a high-energy electron beam ion trap is presented. Thirteen 2s 1/2- 2p 3/2 transitions in eight ionization states bteween Li-like U 89+ and Ne-like U 82+ are identified and measured with an accuracy as high as 37 ppm, providing benchmarks for testing relativistic correlation and quantum electrodynamic effects in highly charged multielectron ions. A value of 47.39±0.35 eV is found for the 2s 1/2 Lamb shift in Li-like U 89+ , in excellent agreement with theory

Structure and lamb shift of 2s1/2-2p3/2 levels in lithiumlike U89+ through neonlike U82+

International Nuclear Information System (INIS)

Beiersdorfer, P.; Knapp, D.; Marrs, R.E.; Elliott, S.; Chen, M.H.

1993-01-01

The first Doppler-shift-free crystal- spectrometer measurements from stationary highly stripped uranium ions are presented. Eleven 2s 1/2 -2p 3/2 transitions in eight ionization stages between Li-like U 89+ and Ne-like U 82+ are identified and measured with an accuracy as high as 45 ppm, providing benchmarks for testing relativistic correlation and quantum electrodynamical effects in highly charged multi-electron ions. A value of 47.38 ± 0.35 eV is found for the 2s 1/2 Lamb shift in Li-like U 89+ , in excellent agreement with the theoretical value of 47.58 eV

Fattening Performances and Carcass Characteristics of Boujaâd and Sardi Lambs in Morocco

Directory of Open Access Journals (Sweden)

A. Chikhi

2005-04-01

Full Text Available The study was carried out to analyze fattening performance and carcass characteristics of 183 and 182 Boujaâd and Sardi single-born ram lambs, respectively. Data were collected during six consecutive years from 1996 to 2001 at INRA Deroua Experimental Station in Morocco. The average fattening period was 64 days and age at slaughter of the lambs 166 days. Data analysis showed that the lamb breed had a significant effect on all traits studied, except on the average daily gain at the end of the fattening period, the feed conversion index [kg dry matter (DM of feed/kg of weight gain], kidney fat, mesenteric fat, fattening grade and carcass conformation. The differences between Sardi and Boujaâd lambs were 0.04 kg DM/animal/day for feed intake, 1.1 kg for weight at slaughter, 1.2 kg for hot carcass weight, 1.3 p. 100 for dressing yield, – 0.20 kg for lungs and heart, 0.03 kg for liver, 0.10 kg for empty stomach, 0.10 kg for head, – 0.48 kg for skin et – 0.07 kg for the four legs. It was concluded that fattening performances and carcass characteristics of Sardi and Boujaâd lambs were highly satisfactory and almost similar. Therefore, they could be used in pure breeding or as sire breeds in crossbreeding with other local breeds in order to improve sheep meat production in Morocco.

Fully Noncontact Wave Propagation Imaging in an Immersed Metallic Plate with a Crack

Directory of Open Access Journals (Sweden)

Jung-Ryul Lee

2014-01-01

Full Text Available This study presents a noncontact sensing technique with ultrasonic wave propagation imaging algorithm, for damage visualization of liquid-immersed structures. An aluminum plate specimen (400 mm × 400 mm × 3 mm with a 12 mm slit was immersed in water and in glycerin. A 532 nm Q-switched continuous wave laser is used at an energy level of 1.2 mJ to scan an area of 100 mm × 100 mm. A laser Doppler vibrometer is used as a noncontact ultrasonic sensor, which measures guided wave displacement at a fixed point. The tests are performed with two different cases of specimen: without water and filled with water and with glycerin. Lamb wave dispersion curves for the respective cases are calculated, to investigate the velocity-frequency relationship of each wave mode. Experimental propagation velocities of Lamb waves for different cases are compared with the theoretical dispersion curves. This study shows that the dispersion and attenuation of the Lamb wave is affected by the surrounding liquid, and the comparative experimental results are presented to verify it. In addition, it is demonstrated that the developed fully noncontact ultrasonic propagation imaging system is capable of damage sizing in submerged structures.

Theory of Lamb Shift in Muonic Hydrogen

Energy Technology Data Exchange (ETDEWEB)

Karshenboim, Savely G., E-mail: savely.karshenboim@mpq.mpg.de [Max-Planck-Institut für Quantenoptik, Garching 85748, Germany and Pulkovo Observatory, St. Petersburg 196140 (Russian Federation); Korzinin, Evgeny Yu.; Shelyuto, Valery A. [D. I. Mendeleev Institute for Metrology, St. Petersburg 190005 (Russian Federation); Ivanov, Vladimir G. [Pulkovo Observatory, St. Petersburg 196140 (Russian Federation)

2015-09-15

There has been for a while a large discrepancy between the values of the proton charge radius measured by the Lamb shift in muonic hydrogen and by other methods. It has already been clear that theory of muonic hydrogen is reliable at the level of this discrepancy and an error there cannot be a reason for the contradiction. Still the status of theory at the level of the uncertainty of the muonic-hydrogen experiment (which is two orders of magnitude below the discrepancy level) requires an additional clarification. Here, we revisit theory of the 2p − 2s Lamb shift in muonic hydrogen. We summarize all the theoretical contributions in order α{sup 5}m, including pure quantum electrodynamics (QED) ones as well as those which involve the proton-structure effects. Certain enhanced higher-order effects are also discussed. We basically confirm former QED calculations of other authors, present a review of recent calculations of the proton-structure effects, and treat self-consistently higher-order proton-finite-size corrections. We also overview theory of the 2p states. Eventually, we derive a value of the root-mean-square proton charge radius. It is found to be 0.840 29(55) fm, which is slightly different from that previously published in the literature (0.840 87(39) fm [Antognini et al., Science 339, 417 (2013)])

Effect of mechanically deboned poultry meat content on technological properties and sensory characteristics of lamb and mutton sausages

Directory of Open Access Journals (Sweden)

Armando Abel Massingue

2018-04-01

Full Text Available Objective This study aimed to develop a value-added product concerning technological and sensory characteristics changes of the use of mechanically deboned poultry meat (MDPM as meat replacer in lamb and mutton emulsion-type sausages (mortadella. Methods Sausages were produced with lamb and mutton and with different contents of MDPM. Six treatments, using lamb or mutton and 0%, 30%, and 60% of MDPM in relation to the meat batter, were produced and analyzed for pH, proximal composition, calcium and residual nitrite content, water activity, 2-thiobarbituric acid reactive substances (TBARS, instrumental color and texture profile. The sensory profile of the mortadella’s was also evaluated by acceptance test and check-all-that-applies (CATA analysis. Results The MDPM addition increased (p<0.05 fat, residual nitrite and calcium content in the all sausage formulations, but mutton sausage had (p<0.05 higher fat and lower moisture content than lamb sausage. The pH, water activity, TBARS index and color was not affected by MDPM additions, while the mutton sausages were significantly redder (higher a*, C*, and lower h° and darker (lower L* than lamb sausages. Adding up to 60% of MDPM reduced (p<0.05 sausages hardness and chewiness. Overall, the meat replacement by MDPM increased the sausages acceptance, but the mutton sausage with 30% of MDPM replacer were the most preferred. Consumers related that pink color, glossy appearance, poultry meat-like taste, soft texture, juicy and greasy mouth feel to all sausages contain MDPM according to CATA analysis. Conclusion Mutton from culled ewes can be utilized for mortadella production with 30% replacement of lean mutton and fat by MDPM.

Effect of Spirulina supplementation on plasma metabolites in crossbred and purebred Australian Merino lambs

Directory of Open Access Journals (Sweden)

A.E.O. Malau-Aduli

2015-06-01

Full Text Available The effect of supplementing purebred and crossbred Merino lambs with Arthrospira platensis (Spirulina on plasma metabolite concentrations under pasture-based management system and the influences of sire breed and sex were investigated. A completely randomized experimental design balanced by 4 sire breeds (Merino, White Suffolk, Dorset and Black Suffolk, 3 Spirulina supplementation levels (0, 100 and 200 ml representing the control, low and high, respectively and 2 sexes (ewe and wether lambs was utilised. All lambs had ad libitum access to the basal diet of ryegrass pastures and barley. Lambs in the treatment groups were individually drenched daily with Spirulina prior to being released with the control group of lambs for grazing over a 6-week period following a 3-week adjustment phase. At the start and completion of the feeding trial, blood samples were centrifuged and plasma metabolites measured. Data were analysed with Spirulina supplementation level, sire breed, sex and their second-order interactions fitted as fixed effects and metabolite concentrations as dependent variables. Gamma-glutamyl transferase (GGT concentrations decreased (from 79.40 to 69.25 UI and glucose increased (from 3.81 to 4.19 mmol/L as the level of Spirulina supplementation increased from 0 ml in the control to 200 ml in the high treatment groups (P < 0.05. Lambs supplemented at low Spirulina levels had the highest creatinine concentrations (61.75 μmol/L. Interactions between sex and supplementation level significantly affected glucose, aspartate aminotransferase (AST and Mg concentrations (P < 0.05, while sire breed and supplementation level interactions influenced albumin to globulin (A/G ratio, creatinine and GGT concentrations. It was demonstrated that Spirulina supplementation does not negatively impact lamb health and productivity.

Influence of pre and postnatal energy restriction on the productive performance of ewes and lambs

Directory of Open Access Journals (Sweden)

Filipe Alexandre Boscaro de Castro

2012-04-01

Full Text Available The objective of this study was to evaluate the influence of feeding energy levels during the last third of gestation and lactation on performance of ewes and lambs up to weaning. The experiment was carried out in the sheep raising sector of Universidade Estadual de Londrina (UEL, from August to December of 2007. Thirty-two adult lambs with 105 days of gestation, average live weight of 57.55 kg and average body condition scores of 3.42 were used in the beginning of the experiment. The animals were confined in collective pens, distributed randomly in three treatments: 2.4; 2.2 and 2.0 Mcal of metabolizable energy (ME/kg of dry matter (DM. Feed supply was ad libitum during the last third of gestation and lactation. Weaning occurred at 70 days. Body weight, body condition score and milk production of ewes and body weight of the lambs were analyzed. There were no significant differences for body weight and body condition of ewes at lambing; however, the level of 2.4 Mcal enabled better results for those characteristics at weaning and higher gain in weight and body condition scoring during the experiment. Severe energetic restriction (2.0 Mcal ME/kg DM determined lower average daily milk production. Lambs from levels 2.4 and 2.2 presented similar weights in all measurements and were superior to those in level 2.0. Lambs from level 2.4 presented higher average weight gain from birth to weaning. The energetic restriction upon lambs at the end of gestation and during lactation limits the performance of ewes and lambs up to weaning.

Vitamin E supplementation of undernourished ewes pre- and post-lambing reduces weight loss of ewes and increases weight of lambs.

Science.gov (United States)

Rosales Nieto, César Augusto; Meza-Herrera, César Alberto; Moron Cedillo, Felipe de Jesús; Flores Najera, Manuel de Jesús; Gámez Vázquez, Hector Guillermo; Ventura Pérez, Felipe de Jesús; Liu, Shimin

2016-03-01

The aim of this study was to test if vitamin E supplementation during late gestation and early lactation would affect the weight of ewes under nutritional restriction and the performance of their lambs. Mature Rambouillet ewes (n = 37) were fed a diet that supplied 70 % of the energy and 80 % of recommended protein requirements and randomly assigned to either vitamin E (vit E, n = 20, 4 IU of α-tocopherol kg(-1) of live weight) or control (n = 17, without vitamin E supplementation). During the experimental period, the mean weight of ewes decreased from 74.6 ± 2.4 to 58.1 ± 2.2 kg. Weight loss of ewes was slightly less for the vit E than the control (-65 vs -124 g day(-1), SEM = 46; P = 0.07). Lambs born from vit E-supplemented ewes were heavier than lambs from the control and grew significantly faster (239 vs 195 g day(-1), SEM = 29.3, P ewes are not met, supplementation of vitamin E during late gestation and early lactation might be an effective strategy to minimise ewe weight loss as well as to increase lamb growth.

Regurgitations in a Lamb with Acute Coenurosis-A case Report.

Directory of Open Access Journals (Sweden)

Evi Ioannidou

2015-06-01

Full Text Available Coenurosis is a disease of the central nervous system in sheep, caused by Coenurus cerebralis, the larval stage of Multiceps multiceps, which inhabits the small intestine of Canidae. A case of regurgitations in a 2.5 month old lamb with acute coenurosis is being reported. The lamb was presented with a sudden onset of ataxia and regurgitations for 10 days. The post-mortem examination revealed 4 immature C. cerebralis cysts between 0.5 and 1.5 cm in diameter located in the brainstem and cerebellum, and histopathological examination revealed multifocal pyogranulomatous meningoencephalitis, so a diagnosis of acute coenurosis was established. Thus, acute coenurosis should be included in the differential diagnosis of regurgitations in lambs.

Fecal microbiota of lambs fed purple prairie clover (Dalea purpurea Vent.) and alfalfa (Medicago sativa).

Science.gov (United States)

Huang, Qianqian; Holman, Devin B; Alexander, Trevor; Hu, Tianming; Jin, Long; Xu, Zhongjun; McAllister, Tim A; Acharya, Surya; Zhao, Guoqi; Wang, Yuxi

2018-01-01

The present study assessed the effect of purple prairie clover (PPC) and PPC condensed tannins (CT) on the fecal microbiota of lambs using high-throughput 16S rRNA gene pyrosequencing. A total of 18 individual lambs were randomly divided into three groups and fed either green chop alfalfa (Alf), a 40:60 (DM basis; Mix) mixture of Alf and PPC, or Mix supplemented with polyethylene glycol (Mix-P) for 18 days. Fecal samples were collected on days 13 through 18 using digital rectal retrieval. The DNA of fecal samples was extracted and the microbial 16S rRNA gene amplicons were sequenced using 454 pyrosequencing. Regardless of diet, the bacterial community was dominated by Firmicutes and Bacteroidetes with many sequences unclassified at the genus level. Forage type and CT had no effect on the fecal microbial composition at the phylum level or on α-diversity. Compared to the Alf diet, the Mix diet reduced the relative abundance of Akkermansia (P = 0.03) and Asteroleplasma (P = 0.05). Fecal microbial populations in Alf and Mix-P clustered separately from each other when assessed using unweighted UniFrac (P < 0.05). These results indicate that PPC CT up to 36 g/kg DM in the diet had no major effect on fecal microbial flora at the phyla level and exerted only minor effects on the genera composition of fecal microbiota in lambs.

Net protein and metabolizable protein requirements for maintenance and growth of early-weaned Dorper crossbred male lambs

Institute of Scientific and Technical Information of China (English)

Tao Ma; Kaidong Deng; Yan Tu; Naifeng Zhang; Bingwen Si; Guishan Xu; Qiyu Diao

2017-01-01

Background:Dorper is an important breed for meat purpose and widely used in the livestock industry of the world.However,the protein requirement of Dorper crossbred has not been investigated.The current paper reports the net protein (NP) and metabolizable protein (MP) requirements of Dorper crossbred ram lambs from 20 to 35 kg BW.Methods:Thirty-five Dorper × thin-tailed Han crossbred lambs weaned at approximately 50 d of age (20.3 ± 2.15 kg of BW) were used.Seven lambs of 25 kg BW were slaughtered as the baseline animals at the start of the trial.An intermediate group of seven randomly selected lambs fed ad libitum was slaughtered at 28.6 kg BW.The remaining 21 lambs were randomly divided into three levels of dry matter intake:ad libitum or 70％ or 40％ of ad libitum intake.Those lambs were slaughtered when the lambs fed ad libitum reached 35 kg BW.Total body N and N retention were measured.Results:The daily NP and MP requirements for maintenance were 1.89 and 4.52 g/kg metabolic shrunk BW (SBW0.75).The partial efficiency of MP utilization for maintenance was 0.42.The NP requirement for growth ranged from 12.1 to 43.5 g/d,for the lambs gaining 100 to 350 g/d,and the partial efficiency of MP utilization for growth was 0.86.Conclusions:The NP and MP requirements for the maintenance and growth of Dorper crossbred male lambs were lower than the recommendations of American and British nutritional systems.

Effects of feeding different levels of corn steep liquor on the performance of fattening lambs.

Science.gov (United States)

Azizi-Shotorkhoft, A; Sharifi, A; Mirmohammadi, D; Baluch-Gharaei, H; Rezaei, J

2016-02-01

This study was conducted to assess the effect of feeding corn steep liquor (CSL) on in vivo digestibility, ruminal pH, ammonia and hydrolytic enzyme activities, blood metabolites, feed intake (FI) and growth performance in fattening lambs. The CSL is a by-product of wet milling process of maize starch industry. The crude protein (CP), rumen-degradable protein (RDP), lactic acid and metabolisable energy contents of this by-product were 420, 324, 200 g/kg dry matter (DM) and 12.6 MJ/kg DM respectively. Twenty-seven male Moghani lambs were assigned randomly into three groups of nine lambs each in a completely randomised design. Three iso-energetic and iso-nitrogenous diets containing different levels (0, 50 or 100 g/kg dry matter) of CSL were offered ad libitum three times a day. Forage to concentrate ratio of the diets was 30:70. With inclusion of CSL in diet, the contents of canola meal, fish meal, wheat bran, corn grain and sugar beet pulp were decreased. The contents of DM, ash-free neutral detergent fibre (NDFom), ether extract, starch, Ca and S were numerically lower, but soluble protein, RDP and non-fibre carbohydrates were greater in the diets containing CSL in comparison with the control diet. The lambs fed with the diets containing CSL had lower [linear (L), p < 0.06] digestibility coefficients of DM and NDFom as compared to those fed with the diet free of CSL. Ruminal ammonia-N concentration increased (L, p < 0.05), but pH decreased (L, p < 0.05) with raising CSL level in diet. Carboxymethyl cellulase and filter paper-degrading activities decreased (L, p < 0.05), while proteases activity increased (L, p < 0.05) as dietary rates of CSL increased. Microcrystalline cellulase and ɑ-amylase activities were similar among the treatments. Within blood metabolites, only urea-N concentration increased (L, p < 0.05) in the lambs receiving CSL as compared to those fed with diet without CSL. Dietary inclusion of CSL resulted in linear decreases (L, p < 0.05) in the

Chronic copper poisoning in lambs

Energy Technology Data Exchange (ETDEWEB)

Ross, D B

1964-08-08

This communication presented evidence of the elevation of plasma GOT (glutamic oxaloacetic transaminase or aspartate transaminase) concentration during the development of copper toxicity in some experimental lambs, and also demonstrated that plasma GOT concentration can be used to assess the course of the disease during treatment. A group of Kerry Hill lambs were fed 1 1/2 lb per day of a proprietary concentrate containing 40 parts of copper per million on a dry-matter basis in addition to hay and water ad lib. Data was included for the plasma GOT concentrations of the lambs, bled weekly after weaning from pasture to this diet. There was some variation between the individual lambs, and in one there was no increase in plasma GOT by the 20th week when all the surviving lambs were slaughtered. The concentrations of copper found in the caudate lobe of the liver and in the kidney cortex post mortem were given. The overall findings showed that the liver gave a reliable indication of the copper status of an animal whereas the kidney cortex copper concentration was a better criterion for the diagnosis of copper poisoning and was in agreement with the results of Eden, Todd, and Grocey and Thompson. Observations demonstrated the benefits resulting from the early diagnosis of chronic copper poisoning in lambs, when treatment of affected animals may be commenced before the haemolytic crisis develops. Treatment included reducing the copper intake and dosing with ammonium molybdate and sodium sulfate, and the plasma GOT concentration may be used to assess the rate of recovery. 4 references, 3 tables.

The Structure of Urethral Epithelium in Merinos Lambs

Directory of Open Access Journals (Sweden)

Vasile RUS

2018-05-01

Full Text Available The aim of this study was to investigate by histological techniques the structure of urethral epithelium in lambs. In this study, we harvested several fragments (prostatic, membranous and cavernous from urethra from 5 merino’s lambs of 3 months old. The first anatomical segment, the prostatic urethra, is lined by a urinary epithelium. The intermediary layer of this epithelium is formed of 5-6 rows of oval cells. The second segment of urethra has the same type of epithelium but the intermediary layer is formed of 6-7 rows of oval cells. In the last anatomical segment, the penile urethra, the epithelium is the same, but the intermediary layer has 3-4 rows of oval cells. In lambs, the urethra is lined by urinary epithelium. The urethral epithelium does not have the same thickness in all segments. The thinner epithelium it is in the cavernous urethra, the ticker is the membranous urethra.

21 CFR 880.5640 - Lamb feeding nipple.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Lamb feeding nipple. 880.5640 Section 880.5640 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... Devices § 880.5640 Lamb feeding nipple. (a) Identification. A lamb feeding nipple is a device intended for...

Inspection Method for Contact Condition of Soil on the Surface of Underground Pipe Utilizing Resonance of Transverse Lamb Wave

Science.gov (United States)

Tanigawa, Hiroshi; Seno, Hiroaki; Watanabe, Yoshiaki; Nakajima, Koshiro

1998-05-01

A nondestructive inspection method to estimate the contact condition of soil on the surface of an underground pipe, utilizing the resonance of a transverse Lamb wave circulating along the pipe wall is proposed.The Q factor of the resonance is considered and measured under some contact conditions by sweeping the vibrating frequency in a 150-mm-inner diameter Fiberglass Reinforced Plastic Mortar (FRPM) pipe. It is confirmed that the Q factor shows a clear response to the change in the contact conditions. For example, the Q factor is 8.4 when the pipe is in ideal contact with the soil plane and goes up to 19.2 when a 100-mm-diameter void is located at the contact surface of the soil.The spatial resolution of the proposed inspection method is also measured by moving the sensing point along the direction of laying the length of the pipe into a 85-mm-diameter void. The resolution of the proposed method is estimated at about 50 mm.

Low-lying S-wave and P-wave dibaryons in a nodal structure analysis

International Nuclear Information System (INIS)

Liu Yuxin; Li Jingsheng; Bao Chengguang

2003-01-01

The inherent nodal surface structure analysis approach is proposed for six-quark clusters with u, d, and s quarks. The wave functions of the six-quark clusters are classified, and the contribution of the hidden-color channels are discussed. The quantum numbers and configurations of the wave functions of the low-lying dibaryons are obtained. The states [ΩΩ] (0,0 + ) , [ΩΩ] (0,2 - ) , [Ξ * Ω] (1/2,0 + ) , and [Σ * Σ * ] (0,4 - ) and the hidden-color channel states with the same quantum numbers are proposed to be the candidates of experimentally observable dibaryons

GOW2.0: A global wave hindcast of high resolution

Science.gov (United States)

Menendez, Melisa; Perez, Jorge; Losada, Inigo

2016-04-01

The information provided by reconstructions of historical wind generated waves is of paramount importance for a variety of coastal and offshore purposes (e.g. risk assessment, design of costal structures and coastal management). Here, a new global wave hindcast (GOW2.0) is presented. This hindcast is an update of GOW1.0 (Reguero et al. 2012) motivated by the emergence of new settings and atmospheric information from reanalysis during recent years. GOW2.0 is based on version 4.18 of WaveWatch III numerical model (Tolman, 2014). Main features of the model set-up are the analysis and selection of recent source terms concerning wave generation and dissipation (Ardhuin et al. 2010, Zieger et al., 2015) and the implementation of obstruction grids to improve the modeling of wave shadowing effects in line with the approach described in Chawla and Tolman (2007). This has been complemented by a multigrid system and the use of the hourly wind and ice coverage from the Climate Forecast System Reanalysis, CFSR (30km spatial resolution approximately). The multigrid scheme consists of a series of "two-way" nested domains covering the whole ocean basins at a 0.5° spatial resolution and continental shelfs worldwide at a 0.25° spatial resolution. In addition, a technique to reconstruct wave 3D spectra for any grid-point is implemented from spectral partitioning information. A validation analysis of GOW2.0 outcomes has been undertaken considering wave spectral information from surface buoy stations and multi-mission satellite data for a spatial validation. GOW2.0 shows a substantial improvement over its predecessor for all the analyzed variables. In summary, GOW2.0 reconstructs historical wave spectral data and climate information from 1979 to present at hourly resolution providing higher spatial resolution over regions where local generated wind seas, bimodal-spectral behaviour and relevant swell transformations across the continental shelf are important. Ardhuin F, Rogers E

Importance of birthcoat for lamb survival and growth in the Romane sheep breed extensively managed on rangelands.

Science.gov (United States)

Allain, D; Foulquié, D; Autran, P; Francois, D; Bouix, J

2014-01-01

The Romane sheep breed proved to be adapted to harsh conditions with high prolificacy and lamb survival in outdoor farming, even under bad climate conditions. This breed shows large variability in its fleece type at birth and it has been suggested that lamb survival could be related to birthcoat type. The aim of the present study was to: i) characterize the coat of the lamb at birth and quantify lamb survival in relation to the birthcoat type and its protective properties concerning heat loss in the Romane breed raised under permanent exposure outdoors from birth, and ii) estimate genetic parameters of birthcoat type in relation to lamb survival and live body weight. A total of 7,880 lambs from 104 sires and 1,664 dams were used in a 14-yr experiment. The pedigree file included 9,625 individuals over 15 generations. Birthcoat type, coat surface temperature, coat depth, lamb survival, and growth were measured from birth to weaning. Weather data (temperature, wind speed, relative humidity, and precipitation) were recorded daily during lambing time. Two types of coats were observed at birth: hairy coat (62.9% of lambs) with a long coat depth (average 23.3 mm) or woolly 1 (37.1% of lambs) with a short coat depth (average 8.3 mm). Birthcoat type was an important factor affecting lamb survival and growth from birth in the Romane breed. Total mortality rate was significantly less in hairy-bearing coat lambs than in short-woolly coat ones: 7.0% vs. 9.6%, 11.6 % vs. 14.8%, and 15.7 % vs. 20.1 % at 2, 10, and 50 d, respectively, and the relative risks of death increased by 37%, 67%, and 46 % at 2, 10, and 50 d of age, respectively, in short-woolly lambs. At birth, a significant lower coat surface temperature, indicating less heat loss, was observed in long-hairy coat lambs compared with others (21.1°C vs. 26.1°C). Heavier body weights and better growth performances up to the age of 50 d were observed in long-hairy-bearing coat lambs. Lamb survival was positively correlated

Ad libitum Pasture Feeding in Late Pregnancy Does Not Improve the Performance of Twin-bearing Ewes and Their Lambs.

Science.gov (United States)

Corner-Thomas, R A; Back, P J; Kenyon, P R; Hickson, R E; Ridler, A L; Stafford, K J; Morris, S T

2015-03-01

The present study evaluated the effect of controlled ryegrass-white clover herbage availability from day 128 until day 142 of pregnancy in comparison to unrestricted availability, on the performance of twin-bearing ewes of varying body condition score (BCS; 2.0, 2.5, or 3.0) and their lambs. It was hypothesised that under conditions of controlled herbage availability, the performance of lambs born to ewes with a greater BCS would be greater than those born to ewes with a lower BCS. During the period that the nutritional regimens were imposed, the pre- and post-grazing herbage masses of the Control regimen (1,070±69 and 801±30 kg dry matter [DM]/ha) were lower than the ad libitum regimen (1,784±69 and 1,333±33 kg DM/ha; pewe live weight, BCS and back fat depth or on lamb live weight, indices of colostrum uptake, maximal heat production, total litter weight weaned or survival to weaning (p>0.05). The difference in ewe BCSs and back fats observed among body condition groups was maintained throughout pregnancy (pewes from the BCS2.0 group had lower BCS and live weight (2.4±0.2, 74.3±2.6 kg) than both the BCS2.5 (2.6±0.2, 78.6±2.4 kg) and BCS3.0 ewes (2.7±0.2, 79.0±2.6 kg; p0.05). Ewe BCS group had no effect on lamb live weight at birth or weaning or on maximal heat production (p>0.05). Serum gamma glutamyl transferase concentrations of lambs born to BCS3.0 ewes were higher within 36 hours of birth than lambs born to BCS2.0 ewes and BCS2.5 ewes (51.8±1.9 vs 46.5±1.9 and 45.6±1.9 IU/mL, respectively [pewe body condition on lamb plasma glucose concentration (p>0.05). Lamb survival was the only lamb parameter that showed an interaction between ewe nutritional regimen and ewe BCS whereby survival of lambs born to BCS2.5 and BCS3.0 ewes differed but only within the Control nutritional regimen ewes (pewes with pre- and post-grazing ryegrass-white clover herbage covers of approximately 1,100 and 800 kg DM/ha in late pregnancy, provided that herbage covers are 1400

7 CFR 59.302 - Mandatory weekly reporting for lambs.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Mandatory weekly reporting for lambs. 59.302 Section... (CONTINUED) LIVESTOCK MANDATORY REPORTING Lamb Reporting § 59.302 Mandatory weekly reporting for lambs. (a... domestic from imported market purchases: (1) The quantity of lambs purchased through a negotiated purchase...

Effects of an enriched housing environment on sensory aspects and fatty-acid composition of the longissimus muscle of light-weight finished lambs.

Science.gov (United States)

Aguayo-Ulloa, L A; Pascual-Alonso, M; Campo, M M; Olleta, J L; Villarroel, M; Pizarro, D M; Miranda-de la Lama, G C; María, G A

2014-08-01

We analysed the effect of enriched housing on the sensory meat quality and fatty acid composition of longissimus muscle in 60 entire Rasa Aragonesa lambs, housed indoors for 5 weeks in six pens (10 lambs/pen, 0.95 m(2)/lamb, initial weight 17.13±0.18 kg and carcass mean 12.23±0.23 kg); three control pens (barren) and three enriched pens (straw, platform with ramps and a small ramp). The final weight, carcass weight, fatness scores and cooking losses of meat from enriched lambs (EG) were higher and pH 24 was lower (P ≤ 0.05). The EG lambs had more C18:0 and total SFA (P ≤ 0.05). Lamb odour and grass odour were more intense in EG (P ≤ 0.05). Overall liking was higher for EG (P ≤ 0.05) and associated with tenderness (P ≤ 0.0001). The results suggest that environmental enrichment can have effects on fatty acid composition and sensory meat quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

Growth rate, carcass characteristics and meat quality of growing lambs fed buckwheat or maize silage

Directory of Open Access Journals (Sweden)

Gurhan Keles

2018-04-01

Full Text Available Objective This study evaluated inclusion of buckwheat silage to the diet of growing lambs in terms of meat quality as compared to maize silage. Methods Buckwheat, rich in total phenols (TP, 33 g/kg dry matter [DM], was harvested at the end of the milk stage and ensiled in 40 kg plastic bags after wilting (294 g/kg silage DM. A total of 18 growing lambs (21.6±1.2 were individually fed isonitrogenous and isoenergetic total mixed rations (TMR for 75 d that either contained buckwheat or maize silage at DM proportions of 0.50. At the end of feeding trail all lambs were slaughtered to assess carcass characteristics and meat quality. Results Buckwheat silage increased (p0.05 on live weight gain and feed efficiency. Carcass weight, dressing percentage, meat pH, water holding capacity, cooking loss, shear force (kg/cm2, and total viable bacteria count of meat did not differ (p>0.05 between the treatments. However, TP content of meat increased (p<0.001 by feeding buckwheat TMR. Feeding buckwheat TMR also decreased (p<0.05 the b* values of meat. Conclusion The results provide that buckwheat silage is palatable and could successfully include TMR of growing lambs with no adverse effects on performance, carcass and meat quality. Additionally, feeding buckwheat silage to lambs offers increased TP in meat.

Carcass characteristics of lambs fed spineless cactus as a replacement for sugarcane.

Science.gov (United States)

de Oliveira, Juliana Paula Felipe; de Andrade Ferreira, Marcelo; Alves, Adryanne Marjorie Souza Vitor; de Melo, Ana Caroline Cerqueira; de Andrade, Ida Barbosa; Urbano, Stela Antas; Suassuna, Juraci Marcos Alves; de Barros, Leonardo José Assis; de Barros Melo, Tobias Tobit

2018-04-01

Fresh sugarcane has been a new roughage source for ruminant's in semiarid regions, a function of the decline of sugar and alcohol industry in recent years. However, there is little data published regarding lambs fed sugarcane associated with spineless cactus. This study evaluated the effect of sugarcane replacement with spineless cactus (0%, 33%, 66%, and 100%) in the diet of Santa Inês lambs on carcass characteristics. Thirty-six non-castrated Santa Ines lambs at four months of age and an initial body weight of 22±2.3 kg were assigned in a randomized block design and slaughtered after 70 days of confinement. The effects of spineless cactus as a replacement for sugarcane in the diet of the lambs on the carcass characteristics, commercial cut weight and yield, leg tissue composition, and carcass measurements were studied. The study revealed quadratic behavior in slaughter body weight, and hot and cold carcass weight, with maximum values of 38.60, 18.60, and 18.11 kg and replacement levels of 40.18%, 44.42%, and 43.14%, respectively. The cold carcass yield presented an increasing linear behavior. The compactness index of carcass and leg presented a quadratic effect, with estimated maximal values of 0.28 and 0.57 kg/cm and replacement levels of 43.37% and 45.5%, respectively. The weights of commercial cuts of leg, loin, shoulder, and breast showed quadratic behavior, with maximum values of 2.79, 0.852, 1.46, and 1.30 kg and replacement levels of 49.5, 45.32, 39.0, and 40.7, respectively. For tissue composition, quadratic behavior was verified for leg weight, subcutaneous fat, and total fat. The replacement of sugarcane by spineless cactus at level 44% is recommended for finishing lambs considering that this level improved most of the carcass characteristics, weights, and yields of commercial cuts and leg tissue composition.

Kinetics of epsilon antitoxin antibodies in different strategies for active immunization of lambs against enterotoxaemia

Directory of Open Access Journals (Sweden)

Heni F. Costa

2013-08-01

Full Text Available Enterotoxaemia, a common disease that affects domestic small ruminants, is mainly caused by the epsilon toxin of Clostridium perfringens type D. The present study tested four distinct immunization protocols to evaluate humoral response in lambs, a progeny of non-vaccinated sheep during gestation. Twenty-four lambs were randomly allocated into four groups according to age (7, 15, 30 and 45 days, receiving the first dose of epsilon toxoid commercial vaccine against clostridiosis with booster after 30 days post vaccination. Indirect ELISA was performed after the first vaccine dose and booster to evaluate the immune response of the lambs. Results showed that for the four protocols tested all lambs presented serum title considered protective (≥0.2UI/ml epsilon antitoxin antibodies and also showed that the anticipation of primovaccination of lambs against enterotoxaemia conferred serum title considered protective allowing the optimization of mass vaccination of lambs.

Effect of creep feeding system on performance of suckling lambs

International Nuclear Information System (INIS)

Saleh S, A.; Saleh, H.M.

2002-01-01

Twenty seven newly born Barki Lambs of about 3.84 kg live body weight were randomly divided into three groups of nine lambs each. Their weights were recorded at birth. Lambs in the first group were served as controls and fed on their dam's milk only (milk basis) > The second group was fed on their dam's milk in addition to concentrate feed mixture (CFM) as creep feeding> Group three was fed on their dam's milk; concentrate feed mixture and lactic acid producing bacteria. Concentrate feed mixture was offered daily in the morning for lambs under creep feeding system, started at 7 days from birth. Lambs were kept with their mothers in the same pens. Blood samples were collected at 7.30 and 60 days old from the jugular vein of each animal. Total gain, average daily gain and weaning weight of lambs were higher (P<0.05) in groups II and III than control group. Both groups II and III showed no significant difference in weight gain. The higher values serum total proteins were recorded in groups II and III. Values of serum total proteins were recorded in groups II and III . Values of serum albumin were similar in all different groups. However, group III recorded the highest values of globin. Blood serum glutamic pyruvic transaminase (GPT) and glutamic oxalacetic transaminase (GOT) activities were not affected by treatment. It was clearly observed that GPT values were increased with age in all groups. Values for serum glucose were decreased with age until weaning, while serum urea nitrogen was increased with age. The differences among treatments in creatinine concentrations were not significant. Total triiodothyronine (T4) and total thyroxine (T4) concentrations were not significantly different between experimental groups. It is concluded that creep feeding promotes growth in lambs during suckling period and can be successfully used for a short fattening period

Time trends and epidemiological patterns of perinatal lamb mortality in Norway.

Science.gov (United States)

Holmøy, Ingrid Hunter; Waage, Steinar

2015-09-30

Perinatal mortality is a major cause of loss in the sheep industry. Our aim was to explore time trends in crude population stillbirth and neonatal mortality rates in Norway. We used data on 6,435,715 lambs from flocks enrolled in the Norwegian Sheep Recording System (NSRS) from 2000 through 2010 for descriptive analysis of trends. Longitudinal patterns of mortality rates were compared for lambs within different levels of variables suspected to be associated with perinatal loss. There was an approximately linear increase in the annual proportion of stillborn lambs during the study period, from 3.3 % in 2000 to 4.7 % in 2010. In the same time period, average litter size of ewes in NSRS flocks increased from 2.00 to 2.19. However, a steady rise in stillbirth rate was observed within each litter size group, suggesting a gradually increasing impact on stillbirth risk of other, yet unidentified, factors. Average flock size increased during the study period. The highest stillbirth rates were found in the largest and smallest flocks. Early neonatal mortality rates (0-5 days of life) varied from year to year (minimum 2.2 %, maximum 3.2 %) and were invariably higher among triplets and quadruplets than among singletons and twins. Annual fluctuations were parallel within the various litter sizes. A significant overall decreasing trend was present within all litter sizes with the exception of singletons. Weather data for the prime lambing months (April and May) 2000-2010 indicated a relationship between low temperatures and high neonatal mortality rates. At the flock level, there was a significant positive correlation between stillbirths and early neonatal mortality rates (r = 0.13), between stillbirth rates in two consecutive years (r = 0.43) and between early neonatal mortality rates in two consecutive years (r = 0.40). The substantial increase in ovine stillbirth rate in recent years in Norway was to some extent related to a corresponding increase in the

Reproductive characteristics of Awassi ewes under Cornell alternate month accelerated lambing system

Directory of Open Access Journals (Sweden)

Sabri Gül

2010-04-01

Full Text Available We investigated the reproductive responses of Awassi ewes under Cornell alternate month accelerated lambing (CAMAL system. Ewes were randomly allocated to two experimental groups. The first group (control group consists of 20 ewes exposed to rams in September under conventional management system while the second group (CAMAL were divided into four sub-flocks contain 20 head of ewes each one were exposed to rams to obtain three lambing in two years with different breeding and lambing months. In CAMAL ewes, oestrus was synchronized using intra-vaginal sponges with progesterone and PMSG administration. Results revealed that within CAMAL group, the percentage of animals in heat, onset of oestrus, litter size, birth weight and weaning weight were affected by mating months. September and November were the most appropriate months for oestrus ratio (97.5 % and litter size (1.18 and 0.98, respectively. Lambs of control group were heavier at birth and weaning than those of CAMAL group. On the other hand lamb yield was not affected statistically by the CAMAL administration.

Using the gauge condition to simplify the elastodynamic analysis of guided wave propagation

Directory of Open Access Journals (Sweden)

Md Yeasin BHUIYAN

2016-09-01

Full Text Available In this article, gauge condition in elastodynamics is explored more to revive its potential capability of simplifying wave propagation problems in elastic medium. The inception of gauge condition in elastodynamics happens from the Navier-Lame equations upon application of Helmholtz theorem. In order to solve the elastic wave problems by potential function approach, the gauge condition provides the necessary conditions for the potential functions. The gauge condition may be considered as the superposition of the separate gauge conditions of Lamb waves and shear horizontal (SH guided waves respectively, and thus, it may be resolved into corresponding gauges of Lamb waves and SH waves. The manipulation and proper choice of the gauge condition does not violate the classical solutions of elastic waves in plates; rather, it simplifies the problems. The gauge condition allows to obtain the analytical solution of complicated problems in a simplified manner.

7 CFR 59.301 - Mandatory Daily Reporting for Lambs.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Mandatory Daily Reporting for Lambs. 59.301 Section 59... (CONTINUED) LIVESTOCK MANDATORY REPORTING Lamb Reporting § 59.301 Mandatory Daily Reporting for Lambs. (a) In... prices for lambs (per hundredweight) established on that day as F.O.B. feedlot or delivered at the plant...

Decline in faecal worm egg counts in lambs suckling ewes treated with lipophilic anthelmintics: implications for hastening development of anthelmintic resistance.

Science.gov (United States)

Dever, M L; Kahn, L P

2015-04-30

The aim for this experiment was to look for evidence of milk transfer of anthelmintic actives from ewes to their suckling lambs by reference to lambs' faecal worm egg count (WEC). The hypothesis was that WEC will decline in lambs suckling ewes treated with anthelmintics known to be lipophilic. One group of lactating Border Leicester×Merino ewes were treated (TX) with a combination of short (2.5mg/kg monepantel) and long-acting (1mg/kg moxidectin long-acting injection and a sustained release of 4.62g albendazole over 100 days) anthelmintics to remove gastrointestinal nematode (GIN) burden on day 0. The other group of lactating ewes (UTX) and all lambs (White Suffolk sires) were not treated. Ewes and lambs grazed as a single group and were exposed to GIN (predominately Haemonchus contortus) infection from pasture. Measurements were taken on days 0 and 7. WEC of lambs suckling UTX ewes increased from 6441 to 10,341 eggs per gram (epg) between days 0 and 7, while there was a 51% reduction in WEC for lambs suckling TX ewes. Packed cell volume (PCV) was significantly higher for lambs suckling TX ewes on day 7 compared to lambs suckling UTX ewes (28.5% vs. 24.9%, p=0.039). These results suggest that lambs suckling ewes treated with lipophilic anthelmintics received a sub-therapeutic dose via milk which would increase selection within the GIN (H. contortus) population for anthelmintic resistance. Copyright © 2015 Elsevier B.V. All rights reserved.

Structural health monitoring strategy for detection of interlaminar delamination in composite plates

International Nuclear Information System (INIS)

Quaegebeur, N; Micheau, P; Masson, P; Maslouhi, A

2010-01-01

In this paper, a structural health monitoring strategy for detecting interlaminar delamination in a carbon fiber reinforced polymer structure using Lamb waves is proposed. The delamination is simulated by inserting a Teflon tape between two transverse plies and the Lamb wave generation and measurement is enabled by using piezoceramic elements. The Lamb wave theoretical propagation and through thickness strain distribution are studied, in order to determine the optimal configuration of the final system in terms of mode and frequency selection, and piezoceramic sizing and spacing, for detection of cross-sectional delamination. Pitch and catch measurements are performed by comparing wave propagations for different frequencies and along damaged and undamaged paths of the structure, and the analysis of results is performed using the reassigned short time Fourier transform. It appears that in the low frequency range (below 300 kHz), the A0 mode is sensitive to the damage, while in the high frequency range, S1 and A1 modes are both very sensitive to the damage while the propagation of the S0 mode is not affected very much

Identification of delamination interface in composite laminates using scattering characteristics of lamb wave: numerical and experimental studies

Science.gov (United States)

Singh, Rakesh Kumar; Ramadas, C.; Balachandra Shetty, P.; Satyanarayana, K. G.

2017-04-01

Considering the superior strength properties of polymer based composites over metallic materials, they are being used in primary structures of aircrafts. However, these polymeric materials are much more complex in behaviour due to their structural anisotropy along with existence of different materials unlike in metallic alloys. These pose challenge in flaw detection, residual strength determination and life of a structure with their high susceptibility to impact damage in the form of delaminations/disbonds or cracks. This reduces load-bearing capability and potentially leads to structural failure. With this background, this study presents a method to identify location of delamination interface along thickness of a laminate. Both numerical and experimental studies have been carried out with a view to identify the defect, on propagation, mode conversion and scattering characteristics of fundamental anti-symmetric Lamb mode (Ao) when it passed through a semi-infinite delamination. Further, the reflection and transmission scattering coefficients based on power and amplitude ratios of the scattered waves have been computed. The methodology was applied on numerically simulated delaminations to illustrate the efficacy of the method. Results showed that it could successfully identify delamination interface.

Guided wave crack detection and size estimation in stiffened structures

Science.gov (United States)

Bhuiyan, Md Yeasin; Faisal Haider, Mohammad; Poddar, Banibrata; Giurgiutiu, Victor

2018-03-01

Structural health monitoring (SHM) and nondestructive evaluation (NDE) deals with the nondestructive inspection of defects, corrosion, leaks in engineering structures by using ultrasonic guided waves. In the past, simplistic structures were often considered for analyzing the guided wave interaction with the defects. In this study, we focused on more realistic and relatively complicated structure for detecting any defect by using a non-contact sensing approach. A plate with a stiffener was considered for analyzing the guided wave interactions. Piezoelectric wafer active transducers were used to produce excitation in the structures. The excitation generated the multimodal guided waves (aka Lamb waves) that propagate in the plate with stiffener. The presence of stiffener in the plate generated scattered waves. The direct wave and the additional scattered waves from the stiffener were experimentally recorded and studied. These waves were considered as a pristine case in this research. A fine horizontal semi-circular crack was manufactured by using electric discharge machining in the same stiffener. The presence of crack in the stiffener produces additional scattered waves as well as trapped waves. These scattered waves and trapped wave modes from the cracked stiffener were experimentally measured by using a scanning laser Doppler vibrometer (SLDV). These waves were analyzed and compared with that from the pristine case. The analyses suggested that both size and shape of the horizontal crack may be predicted from the pattern of the scattered waves. Different features (reflection, transmission, and mode-conversion) of the scattered wave signals are analyzed. We found direct transmission feature for incident A0 wave mode and modeconversion feature for incident S0 mode are most suitable for detecting the crack in the stiffener. The reflection feature may give a better idea of sizing the crack.

Effect of feeding olive-pulp ensiled with additives on feedlot performance and carcass attributes of fat-tailed lambs.

Science.gov (United States)

Taheri, Mohammad Reza; Zamiri, Mohammad Javad; Rowghani, Ebrahim; Akhlaghi, Amir

2013-01-01

Feed cost has a significant effect on the economic efficiency of feedlot lambs; therefore, the use of low-cost non-conventional feedstuffs, such as olive pulp (OP), has the potential to decrease the production costs. Because optimum inclusion of OP-treated silages has not been determined in feedlot lambs, an experiment was conducted to determine the effect of inclusion of OP ensiled with additives in the diet on the feedlot performance and carcass attributes of feedlot lambs. Ram lambs of Mehraban and Ghezel breeds (n = 50 lambs per breed) were randomly allotted to 10 groups and fed with one of the nine diets containing OP silage or a control diet. Silage treatments were: (1) OP silage without additives (OPS), (2) OP ensiled with 8 % beet molasses and 0.4 % formic acid (OP-MF), and (3) OP ensiled with 8 % beet molasses, 0.4 % formic acid and 0.5 % urea (OP-MFU). The control diet contained 50 % alfalfa hay and 50 % barley grain. Three levels from each silage were chosen to replace the barley grain (10, 20, or 30 % dry matter basis). The lambs were slaughtered after 92 days, and the average daily gain (ADG), feed conversion ratio (FCR), and carcass characteristics were determined. Feeding OPS to fat-tailed lambs, at an inclusion level of 30 %, decreased the carcass dressing percentage, mainly as a result of decreased brisket percentage, but the ADG and FCR values were not adversely affected. Ghezel lambs had higher ADG than Mehraban lambs, but the visceral fat weight percentage, flap weight percentage, and back fat depth were higher in Mehraban. The crude protein content in the longissimus dorsi (LD) muscle was higher in Ghezel, but the dry matter percentage was higher in Mehraban (P 0.05). Most carcass characteristics, including major cuts, were not affected by OPS feeding; therefore, feeding OPS (up to 30 %) can be economical for feedlot lambs. Most carcass characteristics, including major cuts, were not affected by OPS levels used in this experiment; therefore

Search for B^0 meson decays to \\pi^0 K^0_S K^0_S, \\eta K^0_S K^0_S, and \\eta^{\\prime}K^0_S K^0_S

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2009-05-08

We describe searches for B{sup 0} meson decays to the charmless final states {pi}{sup 0}K{sub S}{sup 0}K{sub S}{sup 0}, {eta}K{sub S}{sup 0}K{sub S}{sup 0}, and {eta}{prime}K{sub S}{sup 0}K{sub S}{sup 0}. The data sample corresponds to 467 x 10{sup 6} B{bar B} pairs produced in e{sup +}e{sup -} annihilation and collected with the BABAR detector at the SLAC National Accelerator Laboratory. We find no significant signals and determine the 90% confidence level upper limits on the branching fractions, in units of 10{sup -7}, {Beta}(B{sup 0} {yields} {pi}{sup 0}K{sub S}{sup 0}K{sub S}{sup 0}) < 12, {Beta}(B{sup 0} {yields} {eta}K{sub S}{sup 0}K{sub S}{sup 0}) < 10, and {Beta}(B{sup 0} {yields} {eta}{prime}K{sub S}{sup 0}K{sub S}{sup 0}) < 20.

Giant Lamb shift in photonic crystals

International Nuclear Information System (INIS)

Wang Xuehua; Kivshar, Yuri S.; Gu Benyuan

2004-01-01

We obtain a general result for the Lamb shift of excited states of multilevel atoms in inhomogeneous electromagnetic structures and apply it to study atomic hydrogen in inverse-opal photonic crystals. We find that the photonic-crystal environment can lead to very large values of the Lamb shift, as compared to the case of vacuum. We also suggest that the position-dependent Lamb shift should extend from a single level to a miniband for an assembly of atoms with random distribution in space, similar to the velocity-dependent Doppler effect in atomic/molecular gases

Heterogeneity of variance components for preweaning growth in Romane sheep due to the number of lambs reared

Directory of Open Access Journals (Sweden)

Poivey Jean-Paul

2011-09-01

Full Text Available Abstract Background The pre-weaning growth rate of lambs, an important component of meat market production, is affected by maternal and direct genetic effects. The French genetic evaluation model takes into account the number of lambs suckled by applying a multiplicative factor (1 for a lamb reared as a single, 0.7 for twin-reared lambs to the maternal genetic effect, in addition to including the birth*rearing type combination as a fixed effect, which acts on the mean. However, little evidence has been provided to justify the use of this multiplicative model. The two main objectives of the present study were to determine, by comparing models of analysis, 1 whether pre-weaning growth is the same trait in single- and twin-reared lambs and 2 whether the multiplicative coefficient represents a good approach for taking this possible difference into account. Methods Data on the pre-weaning growth rate, defined as the average daily gain from birth to 45 days of age on 29,612 Romane lambs born between 1987 and 2009 at the experimental farm of La Sapinière (INRA-France were used to compare eight models that account for the number of lambs per dam reared in various ways. Models were compared using the Akaike information criteria. Results The model that best fitted the data assumed that 1 direct (maternal effects correspond to the same trait regardless of the number of lambs reared, 2 the permanent environmental effects and variances associated with the dam depend on the number of lambs reared and 3 the residual variance depends on the number of lambs reared. Even though this model fitted the data better than a model that included a multiplicative coefficient, little difference was found between EBV from the different models (the correlation between EBV varied from 0.979 to 0.999. Conclusions Based on experimental data, the current genetic evaluation model can be improved to better take into account the number of lambs reared. Thus, it would be of

Wigner functions of s waves

International Nuclear Information System (INIS)

Dahl, J. P.; Varro, S.; Wolf, A.; Schleich, W. P.

2007-01-01

We derive explicit expressions for the Wigner function of wave functions in D dimensions which depend on the hyperradius--that is, of s waves. They are based either on the position or the momentum representation of the s wave. The corresponding Wigner function depends on three variables: the absolute value of the D-dimensional position and momentum vectors and the angle between them. We illustrate these expressions by calculating and discussing the Wigner functions of an elementary s wave and the energy eigenfunction of a free particle

Wigner functions of s waves

DEFF Research Database (Denmark)

Dahl, Jens Peder; Varro, S.; Wolf, A.

2007-01-01

We derive explicit expressions for the Wigner function of wave functions in D dimensions which depend on the hyperradius-that is, of s waves. They are based either on the position or the momentum representation of the s wave. The corresponding Wigner function depends on three variables......: the absolute value of the D-dimensional position and momentum vectors and the angle between them. We illustrate these expressions by calculating and discussing the Wigner functions of an elementary s wave and the energy eigenfunction of a free particle....

Tevatron global radius and 0s system

International Nuclear Information System (INIS)

Bristol, S.; Kerns, C.; Kerns, Q.; Miller, H.W.

1985-06-01

It has been found to be practical to extract a turn-average measurement of bunch beam phase relative to cavity gap voltage. This 0s signal shows the bunch position on the rf wave throughout injection, acceleration and extraction, including coherent synchrotron oscillations when present. In turn, the time derivative of 0s is a direct measure of global radial position error. We use the 0s signal, driving a phase shifter in the rf low-level system, to damp coherent synchrotron oscillations. Design and operation will be discussed including single beam bunch operation if available. 8 refs., 5 figs

A niche marketing guide for lamb cooperatives

OpenAIRE

Kazmierczak, Tamra Kirkpatrick; Bell, James B.

1995-01-01

The two types of niche markets targeted by lamb marketing cooperatives are described in this guide. The first type includes specialty middlemen outlets that cooperatives used to market lamb to specialized niches within the traditional meat marketing system of retail food stores, restaurants, food service outlets, and specialty distributors. The second type includes those outlets that cooperatives used to market lamb directly to the consumer, such as freezer markets, farmers' markets, mobile m...

Determination of the S-wave $\\pi \\pi$ scattering lengths from a study of $K^{\\pm} \\to \\pi^{\\pm} \\pi^{0} \\pi^{0}$ decays

CERN Document Server

Batley, J R; Kalmus, G; Lazzeroni, C; Munday, D J; Slater, M W; Wotton, S A; Arcidiacono, R; Bocquet, G; Cabibbo, N; Ceccucci, A; Cundy, D; Falaleev, V; Fidecaro, Maria; Gatignon, L; Gonidec, A; Kubischta, W; Norton, A; Maier, A; Patel, M; Peters, A; Balev, S; Frabetti, P L; Goudzovski, E; Khristov, P Z; Kekelidze, V; Kozhuharov, V; Litov, L; Madigozhin, D T; Marinova, E; Molokanova, N; Polenkevich, I; Potrebenikov, Yu; Stoynev, S; Zinchenko, A; Monnier, E; Swallow, E; Winston, R; Rubin, P; Walker, A; Baldini, W; Cotta-Ramusino, A; Dalpiaz, P; Damiani, C; Fiorini, M; Gianoli, A; Martini, M; Petrucci, F; Savrié, M; Scarpa, M; Wahl, H; Calvetti, M; Iacopini, E; Ruggiero, G; Bizzeti, A; Lenti, M; Veltri, M; Behler, M; Eppard, K; Kleinknecht, K; Marouelli, P; Masetti, L; Moosbrugger, U; Morales-Morales, C; Renk, B; Wache, M; Wanke, R; Winhart, A; Coward, D; Dabrowski, A; Fonseca-Martin, T; Shieh, M; Szleper, M; Velasco, M; Wood, M D; Anzivino, G; Imbergamo, E; Nappi, A; Piccini, M; Raggi, M; Valdata-Nappi, M; Cenci, P; Pepé, M; Pettrucci, M C; Cerri, C; Fantechi, R; Collazuol, G; Di Lella, L; Lamanna, G; Mannelli, I; Michetti, A; Costantini, F; Doble, N; Fiorini, L; Giudici, S; Pierazzini, G; Sozzi, M; Venditti, S; Bloch-Devaux, B; Cheshkov, C; Chèze, J B; De Beer, M; Derré, J; Marel, G; Mazzucato, E; Peyaud, B; Vallage, B; Holder, M; Ziolkowski, M; Bifani, S; Biino, C; Cartiglia, N; Marchetto, F; Bifani, S; Clemencic, M; Goy-Lopez, S; Dibon, H; Jeitler, M; Markytan, M; Mikulec, I; Neuhofer, G; Widhalm, L

2009-01-01

We report the results from a study of the full sample of $~6.031 x 10^{7} K^{\\pm} \\to \\pi^{\\pm} \\pi^{0} \\pi^{0}$ decays recorded by the NA48/2 experiment at the CERN SPS. As first observed in this experiment, the $\\pi^{0} \\pi^{0}$ invariant mass (M_00) distribution shows a cusp-like anomaly in the region around $M_{00} = 2m_{+}$, where m_{+} is the charged pion mass. This anomaly has been interpreted as an effect due mainly to the final state charge exchange scattering process $\\pi^{+}\\pi^{-} \\to \\pi^{0} \\pi^{0}$ in $K^{\\pm} \\to \\pi^{\\pm} \\pi^{+} \\pi^{-}$ decay. Fits to the M_{00} distribution using two different theoretical models provide the presently most precise determination of $a_{0}-a_{2}$, the difference between the pi pi S-wave scattering lengths in the isospin I = 0 and I = 2 states. Higher-order pi pi rescattering terms, included in the two models, allow also an independent, though less precise, determination of a_2.

Fatty acid profile in the ruminal fluid and in the m. longissimus dorsi of lambs fed herbage or concentrate with or without tannins

Directory of Open Access Journals (Sweden)

Alessandro Priolo

2010-01-01

Full Text Available Twenty-eight male lambs were divided into two groups at age 45 d. Fourteen lambs were given fresh herbage (vetch; the remaining lambs were fed a concentrate-based diet. Within each treatment, seven lambs received a supplementation of quebracho tannins. At slaughter (age 105 d the ruminal content and the muscle longissimus dorsi (LD were collected. Ruminal fluid and LD fatty acid composition was determined by gas chromatography. Among the concentrates-fed lambs, tannins supplementation reduced (P < 0.05 the concentration of C18:0 (- 49 % and increased vaccenic acid (VA; + 69 % in the ruminal fluid. When tannins were included into the concentrate, the LD contained double levels of rumenic acid (RA as compared to the LD of the lambs fed the tannins-free concentrate (0.96 vs. 0.46 % of total extracted fatty acids, respectively; P < 0.05. The concentration of PUFA was higher (P < 0.05 and SFA (P < 0.01 lower in the LD from lambs fed the tannin diets as compared to the animals receiving the tannin-free diets. In conclusion, tannins reduce the biohydrogenation of the PUFA in the rumen. This implies that tannins supplementation could be a strategy to increase the RA and PUFA content and to reduce the SFA into ruminant meats.

Ground Juniperus pinchotii and urea in supplements fed to Rambouillet ewe lambs: I. Feedlot growth traits, blood serum parameters, and fecal characteristics.

Science.gov (United States)

Whitney, T R

2017-08-01

Ground woody products and urea are low-cost roughage and N sources. Rambouillet ewe lambs ( = 48, 6 lambs/treatment; initial BW = 42 kg ± 3.8) were used to evaluate effects of using ground (juniper) and urea in supplements on feedlot lamb growth traits, blood serum parameters, and fecal characteristics. In a randomized complete block design (40 d), lambs were individually fed an ad libitum basal sorghum-Sudangrass hay diet, which was fed separate from 1 of 8 supplemental diets (6 lambs/diet; 533 g of supplement/d, as-fed basis). Treatment structure was a 4 × 2 factorial: 4 concentrations of ground juniper (JN: 15%, 30%, 45%, or 60% of DM) and 2 concentrations of urea (UR: 1 or 3% of DM). Lamb growth traits were evaluated on d 0, 5, 12, 19, 26, 33, and 40; blood serum was evaluated on d 6 to 8, 20 to 22, and 34 (at h 3 and 6), and feces was evaluated on d 35. Compared to lambs fed all of the other treatments, lambs fed JN60UR1 or JN60UR3 had reduced supplement DMI (negative quadratic, = 0.007). Hay and total DMI were variable across day (JN × UR × day, 0.10). A JN × day interaction was detected ( 0.17) ADG and G:F. Lamb G:F fluctuated across day (JN × day, = 0.007), but the JN × day quadratic trend ( urea N quadratically increased ( urea N resulted from a greater decline from 3 to 6 h after feeding in lambs supplemented with UR1 vs. UR3. Increasing JN concentration tended to quadratically increase ( = 0.09) fecal DM and linearly decrease ( = 0.002) fecal N, but an effect due to dietary UR was not detected ( > 0.34). Results indicated that daily supplement DMI was restricted only by using JN60. However, a 60% JN-based supplement will not make an effective rangeland supplement for growing ewe lambs, and using 3% UR should not be considered, especially since daily UR intake was not restricted enough to be considered safe.

Body weight and reproductive parameters in fast and weak growing Awassi ram lambs during different age stages.

Science.gov (United States)

Zarkawi, Moutaz; Al-Daker, Al-Moutassem Billah

2016-01-01

This study was carried out on 30 Syrian Awassi ram lambs around 3 months of age. Lambs were divided equally in 2 groups as fast growing (FG) and weak growing (WG) lambs to identify body weight and reproductive parameters in each group during different age stages. Blood samples were collected to determine testosterone and leptin concentrations using radioimmunoassay. At puberty, average body weight and age of FG and WG lambs was 52.4 and 43.1 kg, and 225.9 and 248.0 days, respectively, with a significant (P age (below 1.0 nmol L(-1)) and increased with advancing age with a sharp increase occurring at 7 months of age and at puberty, averages were 12.58 and 11.86 nmol L(-1) for FG and WG groups, respectively, with no significant (P > 0.05) differences. At puberty, average leptin concentration was 3.16 and 2.98 ng mL(-1) for FG and WG groups, respectively, with no significant (P > 0.05) difference.

Effect of copper oxide wire particles dosage and feed supplement level on Haemonchus contortus infection in lambs.

Science.gov (United States)

Burke, J M; Miller, J E; Olcott, D D; Olcott, B M; Terrill, T H

2004-09-02

The objective of the experiment was to determine the optimal dose of copper oxide wire particles (COWPs) to reduce infection of Haemonchus contortus in male lambs. Five to six-month-old hair breed lambs were housed on concrete and fed 450 (L; n = 25) or 675 g (H; n = 25) corn/soybean meal supplement and bermudagrass hay. In July, lambs were inoculated with 10,000 L(3) larvae (97% H. contortus; Day 0). Lambs were administered 0, 2, 4, or 6 g COWP on Day 28. Concentrations of copper in the liver were determined. There were no effects of supplement level on concentrations of copper in the liver and a linear relationship existed between COWP treatment and concentrations of copper in liver (P copper in the liver of the COWP treatment groups. PCV values were more favorable for lambs fed the higher level of supplement, especially when FEC were greater than 8000 epg.

Studies on body composition of crossbred lambs determined by tritiated water with 50:50 roughage: concentrate ratio

International Nuclear Information System (INIS)

Hyder Ali, Md.; Saxena, K.K.; Shukla, V.P.; Ranjhan, S.K.

1977-01-01

Six Muzzaffarnagri x Dorset and six Muzzaffarnagri x Suffolk crossbred lambs were fed 50 : 50 roughage : concentrate ratio having ME of 2.1 Mcal/kg of ratio until they attained 25 kg body weight. Body composition of all the lambs was determined at 25 kg body weight by direct (slaughter method) and indirect (TOH technique) methods. The average corrected TOH space expressed on percent of body weight was found to be 70.48 +- 0.82 and average total body water estimated by desiccation, expressed on percent of body weight, was observed as 69.8 +- 1.08. Body composition of Muzzaffarnagri x Suffolk and Muzzaffarnagri x Dorset crossbred lambs was determined and expressed on empty body weight. The moisture content in Muzzaffarnagri x Dorset crossbred lambs was significantly higher (p<0.05) than in Muzzaffarnagri x Suffolk crossbred lambs but fat and protein contents were not significantly different in the two processes. (author)

Spin waves in ferromagnetic Tb/sub 0.76/Y/sub 0.24/

International Nuclear Information System (INIS)

Wakabayashi, N.; Nicklow, R.M.; Child, H.R.

1978-01-01

The conduction electron susceptibility chi (q) is considered to play an important role in the magnetism of rare-earth metals and alloys. In order to obtain information about chi (q), studies of the spin waves in the alloy Tb/sub 0.76/Y/sub 0.24/ have been carried out in a magnetic field. The magnetic structure of this alloy was found to remain spiral down to liquid helium temperature with zero field. The spin-wave dispersion curve in this structure has already been studied along the c*-direction, and the results were analyzed successfully in terms of a susceptibility function corresponding to a one-dimensional system with a slight modification. In order to obtain somewhat independent information about chi (q), the spin-wave dispersion curve for the ferromagnetic phase has been studied. A field of 14 kG was necessary to transform the structure into a ferromagnet at liquid helium temperature. Spin-wave energies which are calculated in terms of the susceptibility function determined from the measurements in the spiral structure agree rather well with the observed energies. A large damping and softening of the spin wave has been observed near the wave vector q=0.16 which characterized the spiral configuration. The origin of the phenomenon may be related to the instability of the ferromagnetic structure

Effect of creep-fed supplement on the susceptibility of pasture-grazed suckling lambs to gastrointestinal helminths.

Science.gov (United States)

de Melo, Gleice Kelli Ayardes; Ítavo, Camila Celeste Brandão Ferreira; Monteiro, Kedma Leonora Silva; da Silva, Jonilson Araújo; da Silva, Pâmila Carolini Gonçalves; Ítavo, Luís Carlos Vinhas; Borges, Dyego Gonçalves Lino; de Almeida Borges, Fernando

2017-05-30

This study evaluated the effect of creep feeding a protein supplement on the susceptibility of suckling lambs to infection with gastrointestinal helminths. Male and female lambs were grazed on Brachiaria spp. pastures next to their mothers. Animals were allocated to one of two treatments: creep feeding (261g/d) and control (no supplementation). The trial period was the suckling of lambs during two years of study: May-October 2013 and March-July 2014. Supplementary creep feeding of lambs improved animal performance (PCreep-fed lambs reached 18kg body weight in 64 d, but unsupplemented lambs required 77 d to reach the same weight. Lambs were susceptible to helminth infection during lactation; lambs in both treatments had high fecal egg counts (FECs), with means >1000 eggs per gram, as early as 45days of age, when the daily grazing time per animal increased. Creep feeding reduced the FECs of suckling lambs >60days of age in infections dominated by Haemonchus contortus. Totals of 20 and 48 anthelmintic treatments were administered to the supplemented and unsupplemented animals, respectively. The effect of this variable, however, was significant (P0.05) between the two treatments, indicating similar challenges by infective larvae to both groups. The supplementation of lambs by creep feeding can thus be a strategy for the sustainable control of helminth infection, because it reduces the dependence on anthelmintic treatment. Copyright © 2017. Published by Elsevier B.V.

Buffel grass (Cenchrus ciliaria L.) substitution for orange pulp on intake, digestibility, and performance of hairsheep lambs.

Science.gov (United States)

Macías-Cruz, Ulises; Quintero-Elisea, Juan A; Avendaño-Reyes, Leonel; Correa-Calderón, Abelardo; Alvarez-Valenzuela, Francisco D; Soto-Navarro, S A; Lucero-Magaña, F A; González-Reyna, Arnoldo

2010-02-01

Twenty Dorper x Pelibuey male lambs were used to evaluate the effect of substitution of forage with fresh orange pulp (FOP) in diets for fattening lambs on productive behavior, nutrient intake, apparent digestibility coefficient, and feeding costs. Lambs were divided into five groups (n = 4) and then housed in individual pens during 70 d. Treatments consisted of five levels of FOP (0, 25, 50, 75 and 100%) which substituted buffel grass hay on the base diet (40:60%, forage:concentrate). Additionally, changes in chemical composition of FOP stored in stack during 8 d were evaluated (from the day 1 until day 8). Daily feed intake expressed as kg/day and % live weight, lamb growth rate, feeding cost of each lamb per day and per fattening period, hemicellulose intake, and DM, OM, CP, NDF and hemicellulose digestibility showed a quadratic effect (P 0.05) among storage days. Therefore, replacing around 75% of buffel grass hay with FOP in diets for fattening lambs resulted in the best growth rate and more efficient diet utilization. Fresh orange pulp stored in a stack did not change its chemical composition, and did not affect its utilization as a sheep feedstuff.

Sifat Fisik Daging Sapi, Kerbau dan Domba pada Lama Postmortem yang Berbeda (Physical Characteristics of Beef, Buffalo and Lamb Meat on Different Postmortem Periods

Directory of Open Access Journals (Sweden)

Komariah (Komariah

2012-02-01

buffalo meat and lamb. The mean shear force of beef (6.73±0.16 kg/cm2 and buffalo meat (6.53±0.38 kg/cm2 were significantly (P<0.05 higher than lamb (5.24±0.93 kg/cm2. (Key words: Physical characteristic, Postmortem, Beef, Buffalo, and Lamb meat

Determination of the S-wave scattering shape parameter P from the zero-energy wave function

International Nuclear Information System (INIS)

Kermode, M.W.; van Dijk, W.

1990-01-01

We show that for S-wave scattering at an energy k 2 by a local potential which supports no more than one bound state, the shape parameter P and coefficients of higher powers of k 2 in the effective range expansion function cotδ=-1/a+1/2 r 0 k 2 -Pr 0 3 k 3 +Qr 0 5 k 6 +..., where δ is the phase shift, may be obtained from the zero-energy wave function, u 0 (r). Thus δ itself may be determined from u 0 . We show that Pr 0 3 =∫ 0 R [β(r)u 0 2 (r)-bar β(r)bar u 0 2 (r)]dr, where r 0 is the effective range, β(r) is determined from an integral involving the wave function, and bar β(r) is a simple function of r which involves the scattering length and effective range

Lamb shift of Rydberg atoms in a resonator

International Nuclear Information System (INIS)

Belov, A.A.; Lozovik, Yu.E.; Pokrovsky, V.L.

1988-08-01

The Lamb shift of a Rydberg atom in a cavity is shown to be enhanced with the resonance interaction of a virtual atomic transition and cavity modes. The dependence of the Lamb shift on quantum numbers and atomic number changes drastically. Shifting cavity walls and scanning the atomic beam one can vary the Lamb shift. The value of the Lamb shift in a cavity may exceed a typical magnitude of the fine structure energy. For a rough resonance tuning the Coulumb multiplet occurs to be strongly mixed and a novel classification is necessary. (author). 8 refs, 2 figs

Effects of Dietary Lycopene Supplementation on Plasma Lipid Profile, Lipid Peroxidation and Antioxidant Defense System in Feedlot Bamei Lamb.

Science.gov (United States)

Jiang, Hongqin; Wang, Zhenzhen; Ma, Yong; Qu, Yanghua; Lu, Xiaonan; Luo, Hailing

2015-07-01

Lycopene, a red non-provitamin A carotenoid, mainly presenting in tomato and tomato byproducts, has the highest antioxidant activity among carotenoids because of its high number of conjugated double bonds. The objective of this study was to investigate the effect of lycopene supplementation in the diet on plasma lipid profile, lipid peroxidation and antioxidant defense system in feedlot lamb. Twenty-eight Bamei male lambs (90 days old) were divided into four groups and fed a basal diet (LP0, 40:60 roughage: concentrate) or the basal diet supplemented with 50, 100, and 200 mg/kg lycopene. After 120 days of feeding, all lambs were slaughtered and sampled. Dietary lycopene supplementation significantly reduced the levels of plasma total cholesterol (p0.05). The levels of TG (pCAT, pCAT (p<0.05, linearly) and SOD (p<0.001, linearly). Therefore, it was concluded that lycopene supplementation improved the antioxidant status of the lamb and optimized the plasma lipid profile, the dosage of 200 mg lycopene/kg feed might be desirable for growing lambs to prevent environment stress and maintain normal physiological metabolism.

Effect of different dietary energy levels on the body composition of Muzaffarnagari lambs fattened to different body weights

International Nuclear Information System (INIS)

Ali, M.H.; Ranjhan, S.K.; Pathak, N.N.

1979-01-01

Twenty eight male and 32 female Muzaffarnagari lambs were reared intensively on 4 rations containing 1.8, 2.0, 2.1 and 2.3 Mcal ME/kg of ration upto 25, 30 and 35 kg weights. Body composition of 27 lambs at 25 kg, 11 lambs at 30 kg and 14 lambs at 35 kg body weight was determined direct by slaughter and desiccation and indirect by TOH dilution techniques. The average corrected TOH space 72.30 +- 1.01 percent at 25 kg body weight and 69.61 +- 1.63 percent at 30 and 35 kg body weight (combined). Mean values by desiccation for corresponding body weights were 65.21 +- 1.04 and 65.00 +- 1.26 percent, respectively. There was no significant difference in the moisture content between the groups and sexes at different body weights. Protein content was significantly (P < 0.01) high in male lambs at all the weights. The difference in fat content due to treatments and sex was non-significant at 25 kg weight but significant (P < 0.01) at 30 and 35 kg body weights. The percentage of fat increased with the increase in the ME content of rations except in the female lambs of group 3 at 35 kg body weight which recorded least fat. (auth.)

Interaction between copper oxide wire particles and Duddingtonia flagrans in lambs.

Science.gov (United States)

Burke, J M; Miller, J E; Larsen, M; Terrill, T H

2005-11-25

An experiment was completed to determine if copper oxide wire particles (COWP) had any effect on the activity of the nematode-trapping fungus Duddingtonia flagrans in growing lambs. COWP has been used recently as a dewormer in small ruminants because of nematode resistance to anthelmintics. D. flagrans has been used to control free-living stages of parasitic nematodes in livestock. Katahdin and Dorper lambs, 4 months of age, were administered no or 4 g COWP (n=24/dose) in early October 2003. Haemonchus contortus was the predominant gastrointestinal parasite during the trial, which was acquired naturally from pasture. Half the lambs from each COWP group were supplemented with corn/soybean meal with or without D. flagrans for 35 days. Fecal egg counts (FEC) and packed cell volume (PCV) were determined weekly between days 0 (day of COWP administration) and 35. Feces from lambs in each treatment group were pooled and three replicates per group were cultured for 14 days at room temperature. Larvae (L3) were identified and counted per gram of feces cultured. Treatment with COWP was effective in decreasing FEC, which remained low compared with FEC from lambs not treated with COWP. This led to an increase in PCV in these lambs (COWP x day, Pcopper on H. contortus, and the additional larval reducing effect exerted by the nematode destroying fungus D. flagrans, the expected result would be a much lower larval challenge on pasture when these two tools are used together in a sustainable control strategy.

Puberty and Fertility of Ewe Lambs Fed on By-products of Palm and Olive Oil

International Nuclear Information System (INIS)

EL-T arabany, A.A.; Mostafa, M.M.M.; Mohamed, A.K.

2017-01-01

The present study aims to elucidate the effect of palm and olive oil by-products adding to rations on production and reproductive performance of Rahmani and Osimi female sheep. After weaning, Rahmani and Osimi ewe lambs (24 for each) of similar birth type were identified to compare between two rations containing hard fatty acids (HFA) or olive cake (OC) on sexual puberty and fertility of two breeds. The lambs of both breed were randomly divided into three groups: the first group is considered control and received ration which contained concentrate feed mixture (CFM). The second group nourished (OC) consisted of CFM +HFA and the third group nourished (HFA) composed of CFM +OC. The CFM was offered as basal ration to all experimental lambs. Body weight, functions of the liver, kidney, thyroid and progesterone hormones at puberty, and the fertility traits were assayed in the two breeds of ewes. The average body weight of female lambs was higher (P<0.05) with OC than HFA. Female lambs supplied OC reached puberty faster and their thyroid and sexual hormones (progesterone) have been developed earlier than ewe lambs given HFA and those in the control group. Age at puberty and progesterone level in both Rahmani and Osimi ewe lambs were better in ewes fed on OC , than other two groups. The fertility (%) from total ewe lambs and birth weight in ewe lambs fed on OC were higher than ewes fed on HFA and the control. It may be concluded that feeding ewe lambs on diet containing HFA from weaning had positive effects on age at puberty, reproductive fertility and prolificacy

The development of the pupillary light reflex and menace response in neonatal lambs and kids.

Science.gov (United States)

Raoofi, Afshin; Mirfakhraie, Pejman; Yourdkhani, Sorush

2011-03-01

The aim of this study was to investigate the development of the pupillary light reflex and menace response in neonatal lambs and goat kids. Thirty lambs and 33 kids were assessed daily from birth until the pupillary light reflex and menace response had become established. All animals had a controlled pupillary light reflex within 20 h of birth. Lambs and kids had developed menace responses by 8 ± 3 and 14 ± 2 days, respectively. The Mann-Whitney test revealed a significant difference (P kids developed a menace response. Male kids developed this response significantly (P = 0.006) later than females. There was no sex difference in the menace response in the lambs. Overall, the findings indicated that lambs develop a menace response earlier than kids, and female kids develop this response more rapidly than their male counterparts. Copyright © 2010 Elsevier Ltd. All rights reserved.

Jurema preta (Mimosa tenuiflora pods in the diet of lambs

Directory of Open Access Journals (Sweden)

Maiza Araújo Cordão

2017-07-01

Full Text Available Evaluated partial substitution of commonly used concentrate mixture by jurema preta (Mimosa tenuiflora pods (JPP in the diet of Santa Inês lambs of according to a randomized complete block design with three treatments (0, 10 and 20% concentrate substitution, in a 40:60 concentrate: roughage fodder diet and six replications, using 18 non-castrated Santa Inês male lambs with initial body weight of 20.28±1.18 kg. Analyzed variables were apparent coefficients of digestibility and/or daily donsumption of dry matter (CDDM and CDM, organic matter (CDOM and COM, neutral detergent fiber (CDNDF and CNDF, acid detergent fiber (CDADF and CADF, crude protein (CDCP and CCP, crude energy (CDCE only, ether extract (CDEE and CEE, total carbohydrates (CDTCH and CTCH, non fibrous carbohydrates (CDNFC and CNFC, metabolizable energy (CME and water (IH2O, mean daily body weight gain (MDBWG and food conversion (FC. There were no effects (P>0.05 of JPP on digestibility, except for the quadratic effect (P0.05, consumption of CP, NDF, ADF and EE increased linearly, while CNFC decreased linearly. Jurema preta pods can be included in the diet of lambs and may contribute to the sustainability of the sheep activity in the semiarid region of northeast Brazil.

Lamb Shift in Nonrelativistic Quantum Electrodynamics.

Science.gov (United States)

Grotch, Howard

1981-01-01

The bound electron self-energy or Lamb shift is calculated in nonrelativistic quantum electrodynamics. Retardation is retained and also an interaction previously dropped in other nonrelativistic approaches is kept. Results are finite without introducing a cutoff and lead to a Lamb shift in hydrogen of 1030.9 MHz. (Author/JN)

Two S-wave gap symmetry for single crystals of the superconductor BaFe1.8Co0.2As2

International Nuclear Information System (INIS)

Choi, Ki-Young; Kim, Soo Hyun; Choi, Changho; Jung, Myung-Hwa; Wang, X.F.; Chen, X.H.; Noh, Jae Dong; Lee, Sung-IK

2010-01-01

To clarify the gap structure of the iron-pnictide superconductors, we synthesized optimally doped single crystals of BaFe 1.8 Co 0.2 As 2 , which had a critical temperature, T c , of 23.6 K. The initial M-H curve was used to find the lower critical field, H c1 . The full range of the temperature dependence of H c1 was explained by using a two S-wave gap symmetry. We estimate the two gap as Δ 1 (0) = 1.64 ± 0.2 meV for the small gap and Δ 2 (0) = 6.20 ± 0.2 meV for the large gap.

Ingestive behavior of lambs fed diets containing castor seed meal.

Science.gov (United States)

Nicory, Isis Miranda Carvalho; de Carvalho, Gleidson Giordano Pinto; Ribeiro, Ossival Lolato; Silva, Robério Rodrigues; Tosto, Manuela Silva Libanio; Costa-Lopes, Lívia Santos; Souza, Fábio Nicory Costa; de Oliveira Nascimento, Camila

2015-06-01

The objective of this study was to evaluate the substitution of soybean meal for castor seed meal (CSM) in diets for feedlot lambs and the effects of these diets on their ingestive behavior. Fifty male Santa Inês lambs were used. The diets were composed of Tifton 85 hay and a concentrate containing detoxified CSM substituting 0, 25, 50, 75, or 100 % of the soybean meal. There was no effect (P > 0.05) of the CSM levels on the feeding, rumination, idle times, chews and time spent chewing per bolus, total chewing time, number of boli chewed, and number of chews per day. The dry matter (DM) intake decreased linearly (P  0.05) the numbers of feeding, rumination, and idle periods, but had a quadratic effect (P ingestive behavior.

Supplemental safflower oil affects the fatty acid profile, including conjugated linoleic acid, of lamb.

Science.gov (United States)

Boles, J A; Kott, R W; Hatfield, P G; Bergman, J W; Flynn, C R

2005-09-01

The objective of this study was to determine whether increasing levels of dietary safflower oil would alter unsaturated fat (especially CLA) and tocopherol content of lamb, animal performance, carcass characteristics, or color stability of lamb muscle tissue. Targhee x Rambouillet wethers (n = 60) were assigned to one of three diets (four pens per treatment with five lambs per pen) in a completely random design. Diets were formulated with supplemental safflower oil at 0 (control), 3, or 6% (as-fed basis) of the diet. Diets containing approximately 80% concentrate and 20% roughage were formulated, on a DM basis, to be isocaloric and isonitrogenous and to meet or exceed NRC requirements for Ca, P, and other nutrients. A subsample of 12 wethers per treatment was selected based on average BW (54 kg) and slaughtered. Carcass data (LM area, fat thickness, and internal fat content) and wholesale cut weight (leg, loin, rack, shoulder, breast, and foreshank), along with fatty acid, tocopherol, and color analysis, were determined on each carcass. The LM and infraspinatus were sampled for fatty acid profile. Increasing safflower oil supplementation from 0 to 3 or 6% increased the proportion of linoleic acid in the diet from 49.93 to 55.32 to 62.38%, respectively, whereas the percentage of oleic acid decreased from 27.94 to 23.80 to 20.73%, respectively. The percentage of oil in the diet did not (P > or = 0.11) alter the growth and carcass characteristics of lambs, nor did it alter the tocopherol content or color stability of meat. Increasing levels of safflower oil in lamb diets decreased (P safflower oil, up to 6% of the diet, resulted in increasing levels of unsaturated fatty acids and CLA in the lean tissue, without adversely affecting growth performance, carcass characteristics, or color stability of lamb.

Co-housing of Rift Valley fever virus infected lambs with immunocompetent or immunosuppressed lambs does not result in virus transmission

Directory of Open Access Journals (Sweden)

Paul J Wichgers Schreur

2016-03-01

Full Text Available Rift Valley fever virus (RVFV is transmitted among susceptible animals by mosquito vectors. Although the virus can be isolated from nasal and oral swabs of infected animals and is known to be highly infectious when administered experimentally via oral or respiratory route, horizontal transmission of the virus is only sporadically reported in literature. We considered that immunosuppression resulting from stressful conditions in the field may increase the susceptibility to horizontally transmitted RVFV. Additionally, we reasoned that horizontal transmission may induce immune responses that could affect the susceptibility of contact-exposed animals to subsequent infection via mosquito vectors. To address these two hypotheses, viremic lambs were brought into contact with sentinel lambs. One group of sentinel lambs was treated with the immunosuppressive synthetic glucocorticosteroid dexamethasone and monitored for signs of disease and presence of virus in the blood and target organs. Another group of contact-exposed sentinel lambs remained untreated for three weeks and was subsequently challenged with RVFV. We found that none of the dexamethasone-treated contact-exposed lambs developed detectable viremia, antibody responses or significant increases in cytokine mRNA levels. Susceptibility of immunocompetent lambs to RVFV infection was not influenced by previous contact-exposure. Our results are discussed in light of previous findings.

Wireless power transmission using ultrasonic guided waves

International Nuclear Information System (INIS)

Kural, A; Pullin, R; Featherston, C; Holford, K; Paget, C

2011-01-01

The unavailability of suitable power supply at desired locations is currently an important obstacle in the development of distributed, wireless sensor networks for applications such as structural health monitoring of aircraft. Proposed solutions range from improved batteries to energy harvesting from vibration, temperature gradients and other sources. A novel approach is being investigated at Cardiff University School of Engineering in cooperation with Airbus. It aims to utilise ultrasonic guided Lamb waves to transmit energy through the aircraft skin. A vibration generator is to be placed in a location where electricity supply is readily available. Ultrasonic waves generated by this device will travel through the aircraft structure to a receiver in a remote wireless sensor node. The receiver will convert the mechanical vibration of the ultrasonic waves back to electricity, which will be used to power the sensor node. This paper describes the measurement and modelling of the interference pattern which emerges when Lamb waves are transmitted continuously as in this power transmission application. The discovered features of the pattern, such as a large signal amplitude variation and a relatively high frequency, are presented and their importance for the development of a power transmission system is discussed.

Wireless power transmission using ultrasonic guided waves

Energy Technology Data Exchange (ETDEWEB)

Kural, A; Pullin, R; Featherston, C; Holford, K [School of Engineering, Cardiff University, Queens Buildings, The Parade, Cardiff CF24 2AA (United Kingdom); Paget, C, E-mail: kurala@cardiff.ac.uk [Airbus Operations Ltd, New Filton Road, BS99 7AR Bristol (United Kingdom)

2011-07-19

The unavailability of suitable power supply at desired locations is currently an important obstacle in the development of distributed, wireless sensor networks for applications such as structural health monitoring of aircraft. Proposed solutions range from improved batteries to energy harvesting from vibration, temperature gradients and other sources. A novel approach is being investigated at Cardiff University School of Engineering in cooperation with Airbus. It aims to utilise ultrasonic guided Lamb waves to transmit energy through the aircraft skin. A vibration generator is to be placed in a location where electricity supply is readily available. Ultrasonic waves generated by this device will travel through the aircraft structure to a receiver in a remote wireless sensor node. The receiver will convert the mechanical vibration of the ultrasonic waves back to electricity, which will be used to power the sensor node. This paper describes the measurement and modelling of the interference pattern which emerges when Lamb waves are transmitted continuously as in this power transmission application. The discovered features of the pattern, such as a large signal amplitude variation and a relatively high frequency, are presented and their importance for the development of a power transmission system is discussed.

Economic effect of pneumonia and pleurisy in lambs in New Zealand.

Science.gov (United States)

Goodwin-Ray, K A; Stevenson, M A; Heuer, C; Cogger, N

2008-06-01

To estimate the cost of pneumonia and pleurisy in lambs to the sheep industry in New Zealand, in order to provide a reference for future cost-benefit calculations for control programmes to reduce the incidence of pneumonia. An estimate of the economic cost of pneumonia and pleurisy in lambs was based on: cohort studies of the association between growth rate and the extent of pneumonic lesions at slaughter (n=14 flocks), the prevalence of moderate to severe (MS) pneumonia (> or =10% lung surface area affected) and pleurisy (n=1,719 flocks), the correlation between the prevalence of MS pneumonia and economic loss at the flock level, and data on annual slaughter statistics and carcass value in New Zealand. A stochastic spreadsheet model was developed and run with 1,000 iterations. Input variables represented by probability distributions were growth rate, average cost of loss according to the prevalence of pneumonia per month, carcass value, prevalence of pleurisy, and carcasses downgraded for pleurisy, and annual national slaughter statistics. The output was a posterior distribution of the annual cost of disease. The cost of pneumonia only included the loss associated with reduced growth rate, while mortality due to pneumonia was assumed to be low and was ignored. The cost of pleurisy included the loss associated with downgraded or condemned carcasses. Thus, the simulated annual average cost of pneumonia was NZ$28.1 (95% CI=NZ$15.0-42.0) million, and that of pleurisy NZ$25.1 (95% CI=NZ$10.2-48.1) million. The combined cost of pneumonia and pleurisy averaged NZ$53.2 (95% CI=NZ$32.4-78.9) million. The parameters with the greatest impact on the combined cost of pneumonia and pleurisy were prevalence of pleurisy between March and May, and cost of reduced growth due to pneumonia for lambs slaughtered in June. The average cost of pneumonia and pleurisy to the sheep industry in New Zealand due to reduced lamb growth and decreased carcass value is likely to be between NZ$32

Anthelmintic effect of carob pods and sainfoin hay when fed to lambs after experimental trickle infections with Haemonchus contortus and Trichostrongylus colubriformis

Directory of Open Access Journals (Sweden)

Arroyo-Lopez Celia

2014-01-01

Full Text Available The aim of the study was to compare the in vivo anthelmintic activity of sainfoin hay (Onobrychis viciifolia and carob pod meal (Ceratonia siliqua against gastrointestinal nematodes. Seven days before infection, 64 naive lambs were assigned to four different groups: Group S received sainfoin hay and group CAR was fed with carob pods. The remaining lambs received lucerne hay (Medicago sativa and were assigned to positive (non-treated, NT and negative (treated, T control groups (treatment with albendazole. On day 0, lambs were artificially trickle infected for 6 weeks, with a mixture of infective larvae of Haemonchus contortus and Trichostrongylus colubriformis. Parasitological and pathophysiological parameters were measured repeatedly during the 2-month study. Compared to the NT group, decreases in egg excretion were observed in the CAR and S groups with significant differences only found for sainfoin (p < 0.05. At necropsy, group S showed decreases in the total worm numbers of both nematode species with significant differences for H. contortus. In contrast, no differences were noticed for the CAR group. Compared to the NT group, lower values for fecundity of female H. contortus were found in the S and CAR groups, however differences were non-significant. No differences in body weight gains were found between groups. Consistent results were found showing significantly higher packed cell volume (PCV values in the T and S groups compared to NT and CAR groups. Overall, these results confirm a positive effect associated with the feeding of lambs with tanniniferous resources on host resilience (PCV values and against gastrointestinal parasitic nematodes by affecting some biological traits of worm populations (e.g. eggs per gram of faeces and worm numbers. However, the anthelmintic effects differed between the two tannin-containing resources, which might be associated with the quantity and/or quality of secondary metabolites (condensed tannins and

Effect of a screen with flaps and straw on behaviour, stress response, productive performance and meat quality in indoor feedlot lambs.

Science.gov (United States)

Aguayo-Ulloa, L A; Pascual-Alonso, M; Olleta, J L; Sañudo, C; Miranda-de la Lama, G C; María, G A

2015-07-01

We analysed the effect of a modified pen using a wooden screen with flaps and cereal straw as forage and bedding, on behaviour, stress response, performance and meat quality variables of lambs housed in feedlots. Sixty male lambs were placed in enriched (ESF) or conventional (CO) pens (3 pens/treatment, 10 lambs/pen). The CO environment was barren. The ESF lambs showed a great preference for the provided items, which encouraged more natural and richer behaviour, reducing stereotypies and lamb aggressions, and increasing affiliations (P ≤ 0.05), which improves group cohesion. However, ESF lambs also developed a more natural coping style to the handling, evidenced by the higher cortisol levels (65.4 vs. 43.8 nmol/L) and a higher eye temperature as response to the reactivity test (38.1 vs. 37.8 °C). The ESF lambs had a higher (P ≤ 0.05) slaughter weight (27.2 vs. 26.3 kg), conformation score (7.38 vs. 6.07) and pH 24 (5.63 vs. 5.56) but lower cooking losses (12.9 vs. 14.9%) than CO lambs. Copyright © 2015 Elsevier Ltd. All rights reserved.

A comparison of the uptake of [75Se]Selenite [75Se] Selenomethionine and [35S]methionine by the tissues of ewes and lambs

International Nuclear Information System (INIS)

Fuss, C.N.; Godwin, K.O.

1975-01-01

The fate of selenium, given as Na 2 75 SeO 3 , or [ 75 Se] selenomethionine, and of [ 35 S]methionine administered intravenously to ewes and lambs, has been examined. The main intention was to follow the incorporation of selenium into protein in a number of tissues, including liver and kidney, and to measure the extent of that incorporation of selenoamino acid, particularly with respect to the administration of selenite. The ewes chosen were lactating ewes with lambs at foot, and the lambs were animals which had been weaned on to fodder low in selenium and were recovering from white muscle disease with selenium therapy. These two experimental situations were chosen as they offered conditions under which selenium incorporation might be considered to be maximal. Entry of isotope into milk was rapid and was greater when 75 Se was given as the selenoamino acid than as selenite. In both ewes and lambs greater amounts of activity, derived from selenite, were bound to plasma proteins than to the proteins of milk. This was particularly evident in samples taken some hours after administration. This ability of the plasma to bind selenium was demonstrated by alkaline dialysis. Small, though significant amounts of selenium, derived from Na 2 75 SeO 3 , were incorporated as selenoamino acids into the proteins of liver, kidney and pancreas, as well as into the proteins of milk and plasma. In ewes, both selenomethionine and selenocystine were identified chromatographically in enzyme digests of defatted liver and kidney. Some differences occurred in the distribution of labelled compounds in organs from lactating ewes and recovering lambs. The incorporation of selenium into protein is discussed briefly in relation to the recent findings of an association between selenium and the enzyme glutathione peroxidase. (author)

Nasal continuous positive airway pressure inhibits gastroesophageal reflux in newborn lambs.

Directory of Open Access Journals (Sweden)

Djamal Djeddi

Full Text Available BACKGROUND: Using esophageal pHmetry, nasal CPAP (nCPAP has been shown to decrease acid gastroesophageal reflux (GER in adult humans. Although both GER (mainly non-acid and nCPAP use are very frequent in newborns, the effect of nCPAP on GER in early life is unknown. Having recently shown that the newborn lamb is a unique model for studying neonatal GER, our main objective was to assess the effect of nCPAP on GER in newborn lambs. METHODS: Eight newborn lambs, aged 2-3 days, were studied. Continuous esophageal pH-Impedance monitoring and polysomnography were performed for six hours during both spontaneous breathing and nCPAP application at 6 cmH2O (nCPAP(6, in a randomized order. Results were compared in the two experimental conditions, as well as without CPAP during the following 6 hours. RESULTS: i nCPAP(6 virtually abolished GER [mean ± SD reflux number for 6 h = 9.1 ± 8.6 without nCPAP(6 vs. 0.6 ± 1 with nCPAP(6, P<0.05]; ii GER number was also reduced during the 6 h-period following nCPAP(6 application (18 ± 16 without nCPAP(6 vs. 7 ± 8.1 with nCPAP(6, P<0.05; iii nCPAP(6 decreased the depth and duration of lower esophageal sphincter relaxation. CONCLUSIONS: nCPAP inhibits GER in the newborn lamb. Further clinical studies using different levels of nasal CPAP are needed to confirm this result in human infants.

Horace Lamb and Osborne Reynolds: Remarkable mancunians ... and their interactions

International Nuclear Information System (INIS)

Launder, B E

2014-01-01

The paper provides glimpses into the professional lives of arguably, the two outstanding fluid mechanicists of their time who were simultaneously professors at Owens College, Manchester. Their interactions with each other were sometimes amicable but, equally, sometimes testy and their views on their common professional subject differed radically. Reynolds was appointed to the Chair of Engineering in 1868 at the age of 25 against strong competition while Horace Lamb, graduating a decade after Reynolds, was appointed as the inaugural Professor of Applied Mathematics at the University of Adelaide where he stayed for nine years before being appointed to a chair at Owens College in 1885. Among their various interactions the most significant arose from Reynolds' famous 'Reynolds averaging' paper. That was sent for review by Lamb who was critical of the paper but finally recommended that a revised version be published since Reynolds had essentially invented the subject. Reynolds, in his turn, criticised Lamb's patronizing reference to engineers' approach to fluid mechanics in a draft revision of his book Hydrodynamics. Nevertheless, on Reynolds' death in 1912, it was Lamb who attended his funeral on behalf of the University and the Royal Society and who later wrote a moving, much cited obituary of him.

Effects of early feeding on the host rumen transcriptome and bacterial diversity in lambs

Science.gov (United States)

Wang, Weimin; Li, Chong; Li, Fadi; Wang, Xiaojuan; Zhang, Xiaoxue; Liu, Ting; Nian, Fang; Yue, Xiangpeng; Li, Fei; Pan, Xiangyu; La, Yongfu; Mo, Futao; Wang, Fangbin; Li, Baosheng

2016-01-01

Early consumption of starter feed promotes rumen development in lambs. We examined rumen development in lambs fed starter feed for 5 weeks using histological and biochemical analyses and by performing high-throughput sequencing in rumen tissues. Additionally, rumen contents of starter feed-fed lambs were compared to those of breast milk-fed controls. Our physiological and biochemical findings revealed that early starter consumption facilitated rumen development, changed the pattern of ruminal fermentation, and increased the amylase and carboxymethylcellulase activities of rumen micro-organisms. RNA-seq analysis revealed 225 differentially expressed genes between the rumens of breast milk- and starter feed-fed lambs. These DEGs were involved in many metabolic pathways, particularly lipid and carbohydrate metabolism, and included HMGCL and HMGCS2. Sequencing analysis of 16S rRNA genes revealed that ruminal bacterial communities were more diverse in breast milk-than in starter feed-fed lambs, and each group had a distinct microbiota. We conclude that early starter feeding is beneficial to rumen development and physiological function in lambs. The underlying mechanism may involve the stimulation of ruminal ketogenesis and butanoate metabolism via HMGCL and HMGCS2 combined with changes in the fermentation type induced by ruminal microbiota. Overall, this study provides insights into the molecular mechanisms of rumen development in sheep. PMID:27576848

Impacts of post-mortem ageing prior to freezing on technological and oxidative properties of coarse ground lamb sausage in a model system

Directory of Open Access Journals (Sweden)

Juhui Choe

2017-07-01

Full Text Available Objective The objective of this study was to evaluate the effects of ageing time of lamb loins prior to freezing on technological characteristics and oxidation stability of coarse ground lamb loin sausage using in a model system. Methods Lamb loins (M. longissimus lumborum, n = 25 were aged at −1.5°C for 0, 1, 2, 3, and 8 wk and then frozen for the remaining days (a total of 30 wk. The aged/frozen/thawed lamb loins were ground, and model sausages were formulated with 75% aged/frozen/thawed lamb loin, 25% water, 1.5% sodium chloride (NaCl and 0.3% sodium tripolyphosphate. The pH and thaw/purge loss of aged/frozen/thawed lamb loins were evaluated, and protein functionality (protein solubility and emulsifying capacity, water-holding capacity and textural properties of model sausages were determined. Cooked model sausages were vacuum-packaged in a plastic bag and displayed under continuous fluorescent natural white light (3°C±1°C. Colour and lipid oxidation of the cooked model sausages were evaluated on 0 and 21 d of display storage. Results Ageing prior to freezing had no impact on pH and purge/thaw loss of lamb loins and the colour of cooked sausages (p>0.05 made from the loins. Lamb loins aged for at least 3 wk prior to freezing numerically improved total and myofibrillar protein solubilities (p>0.05 and emulsion activity index (p = 0.009 of meat batter, but decreased cooking loss (p = 0.003 and lipid oxidation (p<0.05 of model sausages. Conclusion This study suggests that post-mortem ageing of raw meat prior to freezing could improve water-holding capacity and lipid oxidative stability of sausage made from the meat.

Impacts of post-mortem ageing prior to freezing on technological and oxidative properties of coarse ground lamb sausage in a model system.

Science.gov (United States)

Choe, Juhui; Kim, Hyun-Wook; Farouk, Mustafa M; Brad Kim, Yuan H

2017-07-01

The objective of this study was to evaluate the effects of ageing time of lamb loins prior to freezing on technological characteristics and oxidation stability of coarse ground lamb loin sausage using in a model system. Lamb loins ( M. longissimus lumborum , n = 25) were aged at -1.5°C for 0, 1, 2, 3, and 8 wk and then frozen for the remaining days (a total of 30 wk). The aged/frozen/thawed lamb loins were ground, and model sausages were formulated with 75% aged/frozen/thawed lamb loin, 25% water, 1.5% sodium chloride (NaCl) and 0.3% sodium tripolyphosphate. The pH and thaw/purge loss of aged/frozen/thawed lamb loins were evaluated, and protein functionality (protein solubility and emulsifying capacity), water-holding capacity and textural properties of model sausages were determined. Cooked model sausages were vacuum-packaged in a plastic bag and displayed under continuous fluorescent natural white light (3°C±1°C). Colour and lipid oxidation of the cooked model sausages were evaluated on 0 and 21 d of display storage. Ageing prior to freezing had no impact on pH and purge/thaw loss of lamb loins and the colour of cooked sausages (p>0.05) made from the loins. Lamb loins aged for at least 3 wk prior to freezing numerically improved total and myofibrillar protein solubilities (p>0.05) and emulsion activity index (p = 0.009) of meat batter, but decreased cooking loss (p = 0.003) and lipid oxidation (p<0.05) of model sausages. This study suggests that post-mortem ageing of raw meat prior to freezing could improve water-holding capacity and lipid oxidative stability of sausage made from the meat.

[Changes in the ECG telemetry of lambs infected with Cysticercus ovis].

Science.gov (United States)

Kostov, I; Georgieva, D

1985-01-01

Six lambs were experimentally infected with Cysticercus ovis. Some changes were followed up in the ECG by means of the radiotelemetric method. The infection process led to the following more important changes, such as sinus tachicardia and arhythmia, auricular fibrilation, sinoauricular block, atrial dissociation, the incidence of a pathologic Q deflection; lowering of the R deflection amplitude, and inversion of the T wave. It was found that the changes referred to persist for a longer period (in the case of infarction), and could be made use of in dispensary studies.

Impact of changes in inspired oxygen and carbon dioxide on respiratory instability in the lamb.

Science.gov (United States)

Wilkinson, Malcolm H; Sia, Kah-Ling; Skuza, Elizabeth M; Brodecky, Vojta; Berger, Philip J

2005-02-01

We examined the effect of hypoxia and hypercapnia administered during deliberately induced periodic breathing (PB) in seven lambs following posthyperventilation apnea. Based on our theoretical analysis, the sensitivity or loop gain (LG) of the respiratory control system of the lamb is directly proportional to the difference between alveolar PO2 and inspired PO2. This analysis indicates that during PB, when by necessity LG is >1, replacement of the inspired gas with one of reduced PO2 lowers LG; if we made inspired PO2 approximate alveolar PO2, we predict that LG would be approximately zero and breathing would promptly stabilize. In six lambs, we switched the inspired gas from an inspiratory oxygen fraction of 0.4 to one of 0.12 during an epoch of PB; PB was immediately suppressed, supporting the view that the peripheral chemoreceptors play a pivotal role in the genesis and control of unstable breathing in the lamb. In the six lambs in which we administered hypercapnic gas during PB, breathing instability was also suppressed, but only after a considerable time lag, indicating the CO2 effect is likely to have been mediated through the central chemoreceptors. When we simulated both interventions in a published model of the adult respiratory controller, PB was immediately suppressed by CO2 inhalation and exacerbated by inhalation of hypoxic gas. These fundamentally different responses in lambs and adult humans demonstrate that PB has differing underlying mechanisms in the two species.

Assessment of commercial lamb meat quality by British and Spanish taste panels.

Science.gov (United States)

Sañudo, C; Nute, G R; Campo, M M; María, G; Baker, A; Sierra, I; Enser, M E; Wood, J D

1998-01-01

Trained sensory panels in Britain and Spain assessed loin meat from commercial lambs purchased in Spain, which included Welsh lamb (imported from Britain) and two Spanish breeds (Merino and Rasa Aragonesa). The British panel also assessed British lamb purchased in local butcher shops and supermarkets. Sensory panels, in each country, received meat from the same lambs and used their local methods of cooking and assessment. Spanish panels used unstructured line scales to measure lamb odour intensity, tenderness, juiciness, lamb flavour intensity and two hedonic scales of flavour liking and overall liking. The British panel used 8 point category scales with the same attributes. Results from both panels in objective parameters were in agreement, hence showing that different trained sensory panels may arrive at the same conclusion. However, when panellists were allowed to make hedonic judgements (preference), the British panel preferred British lamb and the Spanish panel preferred Spanish lamb. This finding has important consequences for lamb producers who export their lambs and demonstrates that the underlying reasons for different preferences should be investigated. Production variables are discussed in relation to their influence on lamb eating quality and as a way to tailor lamb eating quality attributes familiar to consumers in the importing country.

Polwarth and Texel ewe parturition duration and its association with lamb birth asphyxia.

Science.gov (United States)

Dutra, F; Banchero, G

2011-10-01

The objective of the present study was to test the hypothesis that parturition duration is related to birth asphyxia in lambs and that asphyxia affects newborn lamb viability and vigor. Two sire and dam genotypes (Texel: TX; Polwarth: PW) and their crosses were represented in the study. Eighty lambs (25 PW sire × PW dam, 13 TX × TX, 25 TX × PW, and 17 PW × TX) born to 69 grazing ewes were used. At birth, the log₁₀ length of the second stage of parturition, birth weight, placental weight, and several body measurements were recorded on all lambs, and jugular blood samples were analyzed with the i-Stat Portable Clinical Analyzer (Abbott, Montevideo, Uruguay). A modified Apgar viability score at birth and lamb behavior during their first hour of life were recorded. Brain weight, muscle:bone ratio, and bone density were recorded in 20 male lambs (5 from each breed group) that were euthanized and dissected 24 h after birth. Data were analyzed by linear regression, least squares ANOVA, and ordinal and binary logistic regressions. Mean blood gas and acid-base variables were 7.21 ± 0.09 for pH, 18.4 ± 9.8 mmHg for partial pressure of oxygen, 53 ± 12.5 mmHg for partial pressure of carbon dioxide, and -4 ± 5.1 mmol/L for extracellular fluid base excess. Parturition duration increased with birth weight (P birth a 16-fold greater risk of asphyxia (P birth, with less bone density (P birth asphyxia is an important risk factor in perinatal lamb mortality.

The effect of nutrition and body condition of triplet-bearing ewes during late pregnancy on the behaviour of ewes and lambs.

Science.gov (United States)

Gronqvist, Gabriella V; Corner-Thomas, Rene A; Kenyon, Paul R; Stafford, Kevin J; Morris, Stephen T; Hickson, Rebecca Edith

2018-04-12

Triplet-born lambs are less likely to survive to weaning than twin-born or single-born lambs. Appropriate ewe-lamb bonding behaviours and lamb vigour behaviours are necessary for survival of lambs. The aim of this experiment was to determine whether maternal nutrition during late pregnancy influenced behaviour of the ewe and her lambs soon after birth, and to determine whether mid-pregnancy body condition score (BCS) influenced any behavioural response. The experiments included ewes that were in BCS 2.0, 2.5 or 3.0 in mid-pregnancy and were fed either ad libitum or to pregnancy-maintenance requirements in late-pregnancy (day 115 until 136 in experiment one, and day 128 until 141 in experiment two). The time taken for lambs to stand, contact dam, suck from dam and follow dam was recorded three to 18 hours after birth. The number of high- and low-pitched bleats emitted by the ewe and lambs was recorded, along with maternal behaviour score (MBS) of the ewe. Lambs in experiment two underwent a maternal-recognition test at 12 or 24 h. There were significant effects of feeding treatment on bleating behaviour of ewes and lambs, but these were inconsistent among BCS groups and between experiments. Lamb vigour behaviours were not affected by feeding treatment. In experiment one, there was no effect of feeding treatment or BCS on MBS, but in experiment two, ewes in BCS3 in mid-pregnancy had greater MBS than ewes in BCS2 in mid-pregnancy (MBS 3.1/5 vs MBS 2.1/5; Pewes and lambs, ad libitum feeding rather than feeding for pregnancy-maintenance requirements can not be used to improve behaviours soon after birth of triplet-bearing ewes in BCS 2 - 3 and their lambs in extensive pastoral conditions.

Diprosopiasis in a lamb. A case report.

Science.gov (United States)

Mazzullo, G; Germanà, A; De Vico, G; Germanà, G

2003-02-01

Conjoined twinning has been reported in most of the domestic animal species. Among them, sheep have the highest incidence of craniofacial defects. A live male crossbreed dystocic two-headed lamb was delivered from a 2-year-old Pinzerita sheep after first mating. After 40 h of life, the lamb spontaneously died. The most important gross findings involved the head, whereas the examination of different organ and tissue sections did not reveal remarkable histomorphological changes. The lamb was classified as a conjoined twinning and, on the basis of the facial duplication, as a diprosopus tetraophtalmus.