qpcr preparation software: Topics by WorldWideScience.org

INEEL BNCT research program. Annual report, January 1, 1996--December 31, 1996

Full text: The focused ion beam (FIB) miller is becoming well established as a machine for the structural analysis of materials and for the rapid preparation of transmission electron microscope specimens. It has also been used for some time in the semiconducting materials industry for the analysis, repair and redesign of device materials. However, one emerging technique is the use of the FIB for micromachining. The FIB software can also be used to manufacture and machine components. This process can occur through converting software, typically in the form of bitmaps or TIF files, to proprietary 'stream' files. These files allow, often complex, patterns to be generated and milled into the specimen and thus the generation of micro-electromechanical systems. Frequently, this involves largely two-dimensional patterns and structures, however, more complex patterns and file types can be generated which allow, for example, device ...

2002-02-01

14

Creating a strategic plan for configuration management using computer aided software engineering (CASE) tools

This report is a summary of the progress and research produced for the Idaho National Engineering and Environmental Laboratory (INEEL) Boron Neutron Capture Therapy (BNCT) Research Program for calendar year 1996. Contributions from the individual investigators about their projects are included, specifically, physics: treatment planning software, real-time neutron beam measurement dosimetry, measurement of the Finnish research reactor epithermal neutron spectrum, BNCT accelerator technology; and chemistry: analysis of biological samples and preparation of {sup 10}B enriched decaborane.

1997-04-01

15

MAGMA: A Liquid Software Approach to Fault Tolerance ...

This paper provides guidance in the definition, documentation, measurement, enhancement of processes, and validation of a strategic plan for configuration management (CM). The approach and methodology used in establishing a strategic plan is the same for any enterprise, including the Department of Energy (DOE), commercial nuclear plants, the Department of Defense (DOD), or large industrial complexes. The principles and techniques presented are used world wide by some of the largest corporations. The authors used industry knowledge and the areas of their current employment to illustrate and provide examples. Developing a strategic configuration and information management plan for DOE Idaho Field Office (DOE-ID) facilities is discussed in this paper. A good knowledge of CM principles is the key to successful strategic planning. This paper will describe and define CM elements, and discuss how CM integrates the facility's physical configuration, design basis, and documentation. The ...

1993-04-13

16

DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

... MAGMA © : A LIQUID SOFTWARE APPROACH TO FAULT TOLERANCE, COMPUTER NETWORK SECURITY, AND SURVIVABLE NETWORKING ...

2001-12-01

17

Impact of Bifidobacterium animalis subsp. lactis BB-12 and, Lactobacillus acidophilus LA-5-containing yoghurt, on fecal bacterial counts of healthy adults

The training of a new project team member was completed (Task 2.1). The Software Requirements Document was written (Task 2.3). It was determined that the CAPE-OPEN interfaces are sufficient for the communication between Fluent and V21 Controller (Task 2.4). The AspenPlus-Fluent prototype on allyl/triacetone alcohol production was further developed to assist the GUI and software design tasks. The prototype was also used to analyze the sensitivity of a process simulation result with respect to a parameter in a CFD model embedded in the process simulation. Thus the integration of process simulation and CFD provides additional process insights and enables the engineer to optimize overall process performance (e.g., product purity and yield) with respect to important CFD design and operation parameters (e.g., CSTR shaft speed). A top-level design of the V21 Controller was developed and discussed. A draft version of the Software ...

2001-07-10

18

British Library Electronic Table of Contents (United Kingdom)

This randomized, placebo-controlled, double blind, parallel dose-response study investigated the impact of 4-week commercial yoghurt consumption supplemented with Bifidobacterium animalis subsp. lactis (BB-12) and Lactobacillus acidophilus (LA-5) on fecal bacterial counts of healthy adults. Fifty-eight volunteers were randomly assigned to three different groups: 1. placebo (no probiotic, no starter and no green tea extract); 2. Yoptimal (10^9cfu/100g of BB-12 and LA-5 and 40mg of green tea extract) and 3. Yoptimal-10 (10^1^0cfu/100g of BB-12, 10^9cfu/100g of LA-5 and 40mg of green tea extract). These yoghurt products also contained Lactobacillus delbrueckii subsp. bulgaricus (10^7cfu/100g) and Streptococcus thermophilus (10^1^0cfu/100g). The quantitative PCR (qPCR) results showed that ther...

2011-01-01

19

Decree of the Czechoslovak Atomic Energy Commission No. 436/1990 on quality assurance of selected facilities with respect to nuclear safety of nuclear facilities

A mass action model of the dose-response curve of immunoradiometric assay and its curve fitting

The Decree specifies basic quality assurance requirements applicable to machines, their parts and materials, civil engineering structures, means for automated control of technological processes including hardware and software, and electricity supply systems related to nuclear safety of nuclear facilities, and stipulates binding procedures for the implementation of technical and organizational provisions associated with the quality of selected equipment to ensure nuclear safety of nuclear facilities. Safety classes are defined for selected equipment. Requirements laid on safety assurance documentation are specified, and requirements placed on safety assurance programmes, their preparation, finalization and approval are defined. Quality assurance requirements are also specified with respect to the designing, manufacture, construction, operation, repair, modification and decommissioning of nuclear facilities. The Decree entered into force on 1 ...

1995-02-01

20

Producing Open Source Software How to Run a Successful Free Software Project

In view of no satisfactory mathematical model is presently available for the dose-response curve of immunoradiometric assay, a three parameter model based on single binding site mass action law has been derived. A curve fitting method based on similar principle of linear robust regression was designed and a software was prepared for use on IBM personal computers. Experiments revealed that the model is applicable to a variety of IRMA systems as well as to time-resolved immunofluorometric assay of hAFP. When there was outlier(s) of the calibration curve, the average bias of unknown samples obtained with this method is significantly smaller than methods using four parameter logistic model or four parameter single site mass action model.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

21

Exploring risk dimensions in the Indian software industry

This comprehensive guide offers several tried and true steps to help you successfully manage the complex process of developing free software. Topics include project management, developer motivation, technical infrastructure to support collaboration, and project promotion. Producing Open Source Software is ideal for developers starting their own free software projects, or people who simply want to participate in the process.

2009-01-01

22

British Library Electronic Table of Contents (United Kingdom)

Abstract The success of software projects is quite subjective in nature and is fettered by many risks, the perception of which varies from individual to individual and largely depends on the demographic characteristics of the executives and even the characteristics of the project. This study aims to identify and gauge the software risk dimensions and analyze the differences of perception among executives toward software risks. The contributions of this study untangle the issues underlying risks in the software industry and associates these issues with the perception of the -human- factor present in the industry.

2011-01-01

23

Software Configuration Management Plan for the Sodium Removal System

An object oriented software bus

This document establishers the Software Configuration Management Plan (SCMP) for the software associated with the control system of the Sodium Removal System (SRS) located in the Interim Examination and Maintenance (IEM Cell) Facility of the FFTF Flux Test.

2000-03-06

24

Software Vulnerabilities in Java

This paper describes a new approach to development of software for highly integrated software-hardware systems such as used for data acquisition and control. This approach, called the Object Oriented Software Bus (OSB), is a way to develop software according to a common specification similar to the way interface hardware has been developed since the advent of bus structures for minicomputers and microcomputers. Key concept of the OSB is extension of the common use of objects to support user interface and data analysis functions to the development of software objects that directly correspond to real- world hardware interfaces and modules.

1995-12-31

25

Il package software GESIS per la gestione di sistemi spettrometrici gamma

Page 1. Software Vulnerabilities in Java Fred Long October 2005 CERT ... iii Abstract Java is essentially a safe language with good security features. ...

2005-10-01

26

Can you count on computers?

Il package software GESIS per la gestione di sistemi spettrometrici gamma

1986-01-01

27

Arc Habitat Suitability Index computer software

"Machines of all kinds depend on complex software to keep them operating safely. But how reliable is the software - and how can we be sure it is reliable?" (4 pages)

1989-01-01

28

@ work' video segment features Robotic Software Engineer

Sep 1, 2011 ... Publication Information. Bookmark and Share. Title: Arc Habitat Suitability Index computer software. Author: Juntti, Thomas M.; Rumble, Mark A. ...

29

ScienceCinema

@ work highlights Idaho National Laboratory employees and the jobs they perform.This segment features Robotic Software Engineer Miles Walton.

30

Multi-fragmentation

No abstract prepared.

1998-08-01

31

BIOINORGANIC CHEMISTRY

Verification of safety critical software

No abstract prepared.

2002-01-01

32

Verification of safety critical software

To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be ...

1996-12-01

33

Software means of dose consumption planning

To assure quality of safety critical software, software should be developed in accordance with software development procedures and rigorous software verification and validation should be performed. Software verification is the formal act of reviewing, testing of checking, and documenting whether software components comply with the specified requirements for a particular stage of the development phase[1]. New software verification methodology was developed and was applied to the Shutdown System No. 1 and 2 (SDS1,2) for Wolsung 2,3 and 4 nuclear power plants by Korea Atomic Energy Research Institute(KAERI) and Atomic Energy of Canada Limited(AECL) in order to satisfy new regulation requirements of Atomic Energy Control Boars(AECB). Software verification methodology applied to SDS1 for Wolsung 2,3 and 4 project will be ...

1996-01-01

34

Security Considerations For Network-Centric Weapon ...

Russian 2009 p. 118 Ukraine Mazilov, AV Stadnik, IA NSC 'Kharkiv

2009-02-23

35

... strategies. Computer and network security deals with cryptography, authentication, and attacks on software. Information ...

2009-09-01

36

JAVA PathFinder

Development of requirements tracking and verification system for the software design of distributed control system

JPF is an explicit state software model checker for Java bytecode. Today, JPF is a swiss army knife

2005-01-01

37

An emulation and management software for MCA with 64 independent coded inputs

In this paper a prototype of Requirement Tracking and Verification System(RTVS) for a Distributed Control System was implemented and tested. The RTVS is a software design and verification tool. The main functions required by the RTVS are managing, tracking and verification of the software requirements listed in the documentation of the DCS. The analysis of DCS software design procedures and interfaces with documents were performed to define the user of the RTVS, and the design requirements for RTVS were developed. 4 refs., 3 figs. (Author)

1998-12-31

38

A Development of Visualization Software for Protective Engineering in Low-Voltage Power Systems

A Software for the Neutron Scattering time-of-flight Spectrometer with 64 independent coded inputs is preset. It performs data acquirement and management. The work platform of the software is the Windows 98 and programmed with Visual Basic 6.0. It supports 64 x 1024 channel analyzer computer system. The friendly interface, convenient operation and high reliability are advantages of the Software

2000-09-07

39

SIMON Host Computer System requirements and recommendations

Full Text Available

2006-07-01

40

Development of a microbiological ammonium to nitrate recycling bioreactor for space capsules

Development Service Order {number_sign}90025 requested recommendations for computer hardware, operating systems, and software development utilities based on current and future SIMON software requirements. Since SIMON`s main objective is to be dispatched on missions by an operator with little computer experience, ``user friendly`` hardware and software interfaces are required. Other design criteria include: a fluid software development environment, and hardware and operating systems with minimal maintenance requirements. Also, the hardware should be expandable; extra processor boards should be easily integrated into the existing system. And finally, the use of well established standards for hardware and software should be implemented where practical.

1990-11-29

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

41

Preparing the works for the St-Genis roundabout.

Since 1988, the Expertise group of Molecular and Cellular Biology (MCB) is an important partner in the development of the Micro-Ecological Life Support System Alternative (MELiSSA). The MELiSSA was designed to allow a small crew to survive on an Antarctic, lunar or Mars outpost, and is a joint research project currently fostered by the European Space Agency, ESA. The MELiSSA functions through a series of five interconnected compartments, of which four are microbial bioreactors and was engineered to degrade organic waste, regenerate the outpost's atmosphere and water, and provide the crew with an additional vegetarian diet. The bioreactor of the third compartment provides the edible cyanobacteria and plants of the fourth compartment with nitrate instead of ammonium as a source of nitrogen. The two bacteria responsible for the biological transformation of ammonium to nitrate (nitrification) are Nitrosomonas europaea and Nitrobacter winogradskyi. Since all MELiSSA-reactors are to be ...

2009-09-01

42

Waste to energy technologies.

Preparing the works for the St-Genis roundabout.

1999-01-01

43

Temperature of exploding nuclei

No abstract prepared.

2010-04-01

44

No abstract prepared

1999-10-01

45

Status report ANKE

Pionic fusion on the deuteron

No abstract prepared.

2002-03-01

46

Nano technology and radiotracers

No abstract prepared.

2002-03-01

47

NEUTRINOS, PAST AND PRESENT.

No abstract prepared.

2008-10-15

48

Human cornea glycosaminoglycans

No abstract prepared.

2002-10-11

49

Software development for a switch-based data acquisition system

No abstract prepared.

1997-07-01

50

Software development for a switch-based data acquisition system

We report on the software aspects of the development of a switch-based data acquisition system at Fermilab. This paper describes how, with the goal of providing an integrated systems engineering'' environment, several powerful software tools were put in place to facilitate extensive exploration of all aspects of the design. These tools include a simulation package, graphics package and an Expert System shell which have been integrated to provide an environment which encourages the close interaction of hardware and software engineers. This paper includes a description of the simulation, user interface, embedded software, remote procedure calls, and diagnostic software which together have enabled us to provide real-time control and monitoring of a working prototype switch-based data acquisition (DAQ) system.

1991-12-01

51

Wastewater Treatment Software Solutions on Environmental Expert

We report on the software aspects of the development of a switch-based data acquisition system at Fermilab. This paper describes how, with the goal of providing an ``integrated systems engineering`` environment, several powerful software tools were put in place to facilitate extensive exploration of all aspects of the design. These tools include a simulation package, graphics package and an Expert System shell which have been integrated to provide an environment which encourages the close interaction of hardware and software engineers. This paper includes a description of the simulation, user interface, embedded software, remote procedure calls, and diagnostic software which together have enabled us to provide real-time control and monitoring of a working prototype switch-based data acquisition (DAQ) system.

1991-12-01

52

Wastenet

... TOXCHEM+ - Wastewater Predictive Fate by Hydromantis Environmental Software Solutions, Inc. TOXCHEM+ is regarded as the most reliable and ... TOXCHEM+ is EPA-approved for estimating ... »Read more » Contact now / Request quote 0 Comments ...

53

A Software System for Data Analysis in Automated DNA?Sequencing

Verification of Java Programs using Symbolic Execution and Invariant Generation

Software for gel image analysis and base-calling in fluorescence-based sequencing consisting of two primary programs, BaseFinder and GelImager, is described. BaseFinder is a framework for trace processing,...Full Text Available

1998-06-01

54

Software verification is recognized as an important and difficult problem. We present a norel

2004-01-01

55

NASA Astrobiology

Multiphase flow calculation software

System). From collecting terabytes of video footage to tracking the movements of the submarines, this software is essential to the science team as they explore unique structures on...

2011-09-16

56

Lunar Communication & Navigation Architecture

Multiphase flow calculation software and computer-readable media carrying computer executable instructions for calculating liquid and gas phase mass flow rates of high void fraction multiphase flows. The multiphase flow calculation software employs various given, or experimentally determined, parameters in conjunction with a plurality of pressure differentials of a multiphase flow, preferably supplied by a differential pressure flowmeter or the like, to determine liquid and gas phase mass flow rates of the high void fraction multiphase flows. Embodiments of the multiphase flow calculation software are suitable for use in a variety of applications, including real-time management and control of an object system.

2003-04-15

57

Achievements in testing of the MGA and FRAM isotopic software codes under the DOE/NNSA-IRSN cooperation of gamma-ray isotopic measurement systems

Prior to this at TRW, Mr. Schier managed flight software development on the MILSTAR Communications Payload and led integration and verification work on ...

58

A New Approach to Studying Biological and Soft Materials Using Focused Ion Beam Scanning Electron Microscopy (FIB SEM)

DOE/NNSA and IRSN collaborated on a study of gamma-ray instruments and analysis methods used to perform isotopic measurements of special nuclear materials. The two agencies agreed to collaborate on the project in response to inconsistencies that were found in the various versions of software and hardware used to determine the isotopic abundances of uranium and plutonium. IRSN used software developed internally to test the MGA and FRAM isotopic analysis codes for criteria used to stop data acquisition. The stop-criterion test revealed several unusual behaviors in both the MGA and FRAM software codes.

2009-01-01

59

Quality assurance requirements for the computer software and safety analyses

Over the last decade techniques such as confocal light microscopy, in combination with fluorescent labelling, have helped biologists and life scientists to study biological architectures at tissue and cell level in great detail. Meanwhile, obtaining information at very small length scales is possible with the combination of sample preparation techniques and transmission electron microscopy (TEM) or scanning transmission electron microscopy (STEM). Scanning electron microscopy (SEM) is well known for the determination of surface characteristics and morphology. However, the desire to understand the three dimensional relationships of meso-scale hierarchies has led to the development of advanced microscopy techniques, to give a further complementary approach. A focused ion beam (FIB) can be used as a nano-scalpel and hence allows us to reveal internal microstructure in a site-specific manner. Whilst FIB instruments have been used to study and verify the ...

2006-02-22

60

Data analysis software for researching transportation of radiopharmaceuticals in body

The requirements are given as placed on the development, procurement, maintenance, and application of software for the creation or processing of data during the design, construction, operation, repair, maintenance and safety-related upgrading of nuclear power plants. The verification and validation processes are highlighted, and the requirements put on the software documentation are outlined. The general quality assurance principles applied to safety analyses are characterized. (J.B.). 1 ref.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

61

Construction of a data analyzer computer program for neutron activation analysis

In research of nuclear medicine and development of radiopharmaceuticals, it is necessary to do data analysis and know transportation behaviors of the radionuclide in tissues or organs concerned. Based on polynomial fitting method, we developed the software INDFIT 1.0 programmed by Microsoft Visual Basic 6.0 (VB 6) for the data analysis. Experimental calculations showed that the software was of practical use

2003-05-01

62

2003 SNL ASCI applications software quality engineering assessment report.

A new software for neutron activation analysis was designed, built and implemented on a desktop computer using Visual Basic 6.0 program. The construction of this data analyzer computer program is described. The new software deals with peak reports resulting from Gammaplus software with minimum interference from the user in order to save time, manpower and minimize human errors. Its ability to find the concentrations of chemical elements within samples is proven to be fast, reliable and user friendly. (author)

63

The development of thyroid dose assessment software for nuclear or radiological emergency

This document describes the 2003 SNL ASCI Software Quality Engineering (SQE) assessment of twenty ASCI application code teams and the results of that assessment. The purpose of this assessment was to determine code team compliance with the Sandia National Laboratories ASCI Applications Software Quality Engineering Practices, Version 2.0 as part of an overall program assessment.

2004-02-01

64

SIMON Host Computer System requirements and recommendations

Objective: To develop software for assessment of dose to thyroid gland in emergencies resulting in the release of radioiodine. Methods: Based on procedures for thyroid monitoring and dose assessment introduced in IAEA publications (IAEA-TECDOC-1092 and EPR-MEDICAL-2005), a software was developed with Visual Basic 6.0 program to computerized the methods of thyroid dose estimation. Results: The intake of radioiodine and committed equivalent dose to thyroid could be estimated rapidly and accurately with the present software. Conclusion: The present software provide a practical and rapid tool for estimating thyroid doses received in emergencies resulting in the release of radioiodine by emergency workers and members of public, which is necessary for recommendation of further actions. (authors)

2006-12-01

65

IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

Development Service Order {number sign}90025 requested recommendations for computer hardware, operating systems, and software development utilities based on current and future SIMON software requirements. Since SIMON's main objective is to be dispatched on missions by an operator with little computer experience, user friendly'' hardware and software interfaces are required. Other design criteria include: a fluid software development environment, and hardware and operating systems with minimal maintenance requirements. Also, the hardware should be expandable; extra processor boards should be easily integrated into the existing system. And finally, the use of well established standards for hardware and software should be implemented where practical.

1990-11-29

66

Determinants of software quality in offshore development - An empirical study of an Indian vendor

Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards ...

1988-06-12

67

British Library Electronic Table of Contents (United Kingdom)

ContextCost advantage has been one of the primary drivers of successful offshoring engagements of Indian software and services companies. However, the emphasis has shifted to the ability of the vendors to provide high quality over cost advantage in delivering software products and services. Meeting high quality requirements of the clients is a challenge due to the very nature of development and delivery of software through offshoring. ObjectiveThe objective of this research paper is to identify and evaluate the key determinants of quality in the case of software projects delivered through offshoring model. MethodA detailed survey was conducted among project managers/project leaders (leads) of a leading midsize Indian IT services company to evaluate the relationship of the determinants on t...

2011-01-01

68

Class 1E digital systems studies

PT3. [SITE 2002 Section].

This document is furnished as part of the effort to develop NRC Class 1E Digital Computer Systems Guidelines which is Task 8 of USAF Rome Laboratories Contract F30602-89-D-0100. The report addresses four major topics, namely, computer programming languages, software design and development, software testing and fault tolerance and fault avoidance. The topics are intended as stepping stones leading to a Draft Regulatory Guide document. As part of this task a small scale survey of software fault avoidance and fault tolerance practices was conducted among vendors of nuclear safety related systems and among agencies that develop software for other applications demanding very high reliability. The findings of the present report are in part based on the survey and in part on review of software literature relating to nuclear and other critical installations, as well as on the authors' ...

69

{sigma}-Hyperon production at COSY-TOF

This document contains 142 papers on PT3 (Preparing Tomorrow's Teachers to use Technology) from the SITE (Society for Information Technology & Teacher Education) 2002 conference. Topics covered include: a technology in urban education summit; student professional development; meeting NCATE (National Council of Teachers of English) standards; faculty use of WebCT; preparing teachers for the digital age; technology in K-8 multicultural classrooms; using immersive 360 degree images; consortium building; student evaluation; technology fellows; incentives that facilitate institutional change; impact of a temporary grant; a consortium for outstanding achievement in teaching with technology; changes implemented after technology professional development sessions; Web-based modules for teaching mathematics to minority students; student teaching technology sites; preservice teachers design technology-enhanced learning experiences; planning, ...

2002-03-01

70

{lambda}-Hyperon production at COSY-TOF

No abstract prepared.

2002-03-01

71

Tracing cosmic star formation with EXIST

No abstract prepared.

2002-03-01

72

The TofRoot project - status and perspectives

No abstract prepared.

2004-01-01

73

THE STAR TIME PROJECTION CHAMBER.

No abstract prepared.

2002-03-01

74

Summary of COSY-13 results

No abstract prepared.

1999-05-10

75

Simulation of neutron detector efficiencies

No abstract prepared.

2002-03-01

76

Server Complexity, A Model for Managing Resources

No abstract prepared.

2002-03-01

77

Self-neutralized Ion Implantation into Insulators

No abstract prepared.

1999-12-01

78

Safe landing; Sicher landen

No abstract prepared.

1996-11-01

79

Reliability analysis of pipe whip impacts.

No abstract prepared.

2003-05-01

80

Reaction of ions in radiation chemistry

No abstract prepared.

2005-08-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

81

Quark-Hadron Duality in Mesons Electroproduction

No abstract prepared

1998-01-01

82

Proteome analysis of castor bean seeds

No abstract prepared.

2007-08-01

83

Production of {omega}-mesons at COSY-11

No abstract prepared.

2008-07-01

84

Predictive capability maturity model.

No abstract prepared.

2002-03-01

85

Predictive capability maturity model (PCMM).

No abstract prepared.

2006-03-01

86

PGA of boron- and hydrogen-bearing minerals

No abstract prepared.

2007-01-01

87

Oxygen enrichment of blast in cupola furnace

No abstract prepared

1998-01-01

88

Nuclear physics with a free electron laser

No abstract prepared.

2007-07-01

89

Natural analogue study of Oklo

No abstract prepared.

2002-07-01

90

NETWORK TRAFFIC CHARACTERIZATION OF TCP

No abstract prepared

1998-01-01

91

Molecular portraits of human breast tumours

No abstract prepared.

2000-06-01

92

Methodologies for multiphase reacting flow simulation.

No abstract prepared.

2000-08-01

93

Mechanoluminescence of g-irradiated salt

No abstract prepared.

1997-01-01

94

Measurement of longitudinal distribution of electron beam

No abstract prepared.

2002-07-01

95

LOUISIANA COASTAL WETLANDS MODELING

No abstract prepared.

2001-07-01

96

No abstract prepared.

1999-12-01

97

LCLS XTOD Fixed Mask

Is there a role for financial investors in carbon markets?

No abstract prepared.

2006-10-11

98

Irradiation effects on electronic functional materials

No abstract prepared.

2009-07-01

99

Investigation of Hypergolic Fuels with Hydrogen Peroxide

No abstract prepared

1998-01-01

100

Integrated chip-scale THz technology.

No abstract prepared.

2000-11-15

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

101

Identification of deuterons with high momenta at ANKE

No abstract prepared.

2009-11-01

102

Heavy-ion RBE and microdosimetric spectra

No abstract prepared.

2002-03-01

103

Handheld trace explosives detector.

No abstract prepared.

2000-09-01

104

Glycosaminoglycan synthesis by human corneal explants

No abstract prepared.

2006-11-01

105

Equivalence classes for gauge theories

No abstract prepared.

1998-07-01

106

Engineering Annual Summary 2003

No abstract prepared.

2008-07-01

107

Emerging laboratory biosecurity issues.

No abstract prepared.

2004-07-21

108

Direct measurement of flow in fractures.

No abstract prepared.

2005-04-01

109

Data-model integration is not magic

No abstract prepared.

2004-06-01

110

Data and facts; Daten und Fakten

No abstract prepared.

2005-03-01

111

Atmospheric Processing Platform (Presentation)

No abstract prepared.

2008-03-15

112

Accelerator parameters for gamma gamma colliders

No abstract prepared.

2008-04-01

113

A study of neutron transmutation doped germanium

No abstract prepared.

1995-02-01

114

2004 RERTR International Proceedings

No abstract prepared

1998-01-01

115

The automatic programming for safety-critical software in nuclear power plants

No abstract prepared.

2004-11-07

116

Front-End-Electronics Communication software for multiple detectors in the ALICE experiment

We defined the Korean unique safety-critical software development methodology by modifying Dr. Harel`s statechart-based on formal methods in order to digitalized the reactor protection system. It is suggested software requirement specification guideline to specify design specification which is basis for requirement specification and automatic programming by the caused by shutdown parameter logic of the steam generator water level for Wolsung 2/3/4 unit SDS no.1 and simulated it by binding the Graphic User Interface (GUI). We generated the K and R C code automatically by utilizing the Statemate MAGNUM Sharpshooter/C code generator. Auto-generated K and R C code is machine independent code and has high productivity, quality and provability. The following are the summaries of major research and development. - Set up the Korean unique safety-critical software development methodology - Developed software ...

1998-06-01

117

Understanding profitability: Why some customers are hot and others are not

In the ALICE experiment at CERN, the Detector Control System (DCS) employs several interacting software components to accomplish its task of ensuring the correct operation and monitoring of the experiment. This paper describes the Front-End-Electronics Communication (FeeCommunication) software and its role within the DCS. The FeeCommunication software's central task is passing configuration and monitoring data between the top level DCS process control and the field devices of several detectors within ALICE. The lowest level of the FeeCommunication software runs on the DCS boards, specialized embedded systems which are in direct contact with the field devices and are physically located within the detector. The middle and upper layers run on standard PC hardware located in the counting room or other external locations. This paper focuses on the design and implementation of the FeeCommunication ...

2006-02-15

118

The Application of Spatial Signature Analysis to Electrical Test Data: Validation Study

Gone are the days when utilities would boast how many new customers were being added to their system annually-regardless of whether they were in fact profitable to serve or not-as if bigger was always better. In a not too distant future, and with the liberalization of the business environment, some utilities may no longer wish to serve certain customers on their systems, while at the same time aggressively wooing other customers. With the anticipated arrival of competition and erosion of utility franchise service areas, the electric power industry will gradually evolve into a mode where customers will be segmented into finer groups and evaluated based on their expected profit margins-theoretically the difference between the revenues expected from them and the cost of serving them. Understanding this basic concept, and the mastery of the art of arriving at the correct profit margin for each market segment, will be essential to overall business profitability and survival in the future. ...

1996-03-01

119

Physics and quality assurance of low dose rate brachytherapy

This paper presents the results of the Spatial Signature Analysis (SSA) Electrical-test (e-test) validation study that was conducted between February and June, 1998. SSA is an automated procedure developed by researchers at the Oak Ridge National Laboratory to address the issue of intelligent data reduction while providing feedback on current manufacturing processes. SSA was initially developed to automate the analysis of optical defect data. Optical defects can form groups, or clusters, which may have a distinct shape. These patterns can reveal information about the manufacturing process. Optical defect SSA uses image processing algorithms and a classifier system to interpret and identify these patterns, or signatures. SSA has been extended to analyze and interpret electrical test data. The algorithms used for optical defect SSA have been adapted and applied to e-test binmaps. An image of the binmap is created, and features such as geometric and invariant moments are extracted and ...

1999-03-15

120

MeshTV: scientific visualization and graphical analysis software

Purpose: The purpose of this course is to review the physical principles underlying design, clinical application and execution of interstitial and intracavitary implants in the classical low dose-rate (LDR) range. This year, the course will focus on quality assurance of sources, applicators and treatment planning software. In addition, development of procedures and QA checks designed optimize treatment delivery accuracy and patient safety during each individual procedure will be reviewed. The level of presentation will be designed to accommodate both physicists and physicians. Implementation of recently published AAPM Task Group reports (no. 40, 'Comprehensive Quality Assurance' and No. 43, 'Dosimetry of Interstitial Brachytherapy Sources') will be reviewed. Outline: (A) General Principles (1) QA endpoints: temporal accuracy, positional accuracy, dose delivery accuracy, and safety of the patient, personnel, and the institution (2) QA procedure development: forms, ...

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

121

Imaging Automation and Volume Tomographic Visualization at Texas Neutron Imaging Facility

The increasing data complexity engendered by the Accelerated Scientific Computing Initiative (ASCI) requires more capability in our scientific visualization software. B Division at Lawrence Livermore National Laboratory (LLNL) addresses these new and changing requirements with MeshTV. We began work on MeshTV around eight years ago, and have progressively refined the software to provide improved scientific analysis and visualization to well over 100 users at Liver-more, Los Alamos, Sandia, and in private industry. (U)

1999-02-08

122

Factors that can influence the economic feasibility of stand-alone and grid-connected photovoltaic systems: case studies using the software AVES-F

A thermal neutron imaging facility for real-time neutron radiography and computed tomography has been developed at the University of Texas reactor. The facility produced good-quality radiographs and two-dimensional tomograms. Further developments have been recently accomplished. A computer software has been developed to automate and expedite the data acquisition and reconstruction processes. Volume tomographic visualization using Interactive Data Language (IDL) software has been demonstrated and will be further developed. Volume tomography provides the additional flexibility of producing slices of the object using software and thus avoids redoing the measurements.

1999-11-14

123

Cost savings through effective use of network resources

This paper presents case studies of economic feasibility of solar photovoltaic systems using the software AVES-F (Analysis of Economic Feasibility of Photovoltaic Systems), developed by the authors, considering cases of stand-alone and grid-connected systems. The software takes into account several factors that can influence the economic feasibility of these kind of systems, like load to be supplied, distance to the grid, the use regime of the system, applied subsidies and others. The main goal of this paper is to analyze some of these factors and to observe how they can affect the economics of PV systems for electricity generation. (authors)

2004-06-07

124

Computer simulation and scientific visualization

The role of computers has become increasingly important for oil and gas field research and operations support. Today, the computer network is an integral part of the increasingly complex computing environment that exists in many companies. Computer networks allow users to efficiently share information, software, and hardware to support critical global communication needs. Because users are able to share software and hardware, the use of computer networks can also result in significant cost savings. This paper describes typical network loading and demand levels for shared software applications on a computer network that has been used for several years.

1994-12-31

125

Web-Based Enterprise Information Systems Development: The Integrated Methodology

The simulation of processes in engineering and the physical sciences has progressed rapidly over the last several years. With rapid developments in supercomputers, parallel processing, numerical algorithms and software, scientists and engineers are now positioned to quantitatively simulate systems requiring many billions of arithmetic operations. The need to understand and assimilate such massive amounts of data has been a driving force in the development of both hardware and software to create visual representations of the underling physical systems. In this paper, and the accompanying videotape, the evolution and development of the visualization process in scientific computing will be reviewed. Specific applications and associated imaging hardware and software technology illustrate both the computational needs and the evolving trends. 6 refs.

1990-01-01

126

Validation of a new software version for monitoring of the core of the Unit 2 of the Laguna Verde power plant with ARTS; Validacion de una nueva version del software para monitoreo del nucleo de la Unidad 2 de la Central Laguna Verde con ARTS

The paper considers software development issues for large-scale enterprise information systems (IS) with databases (DB) in global heterogeneous distributed computational environment. Due to high IT development rates, the present-day society has accumulated and rapidly increases an extremely huge data burden. Manipulating with such huge data arrays becomes an essential problem, particularly due to their global distribution, heterogeneous and weak-structured character. The conceptual approach to integrated Internet-based IS design, development and implementation is presented, including formal models, software development methodology and original software development tools for visual problem-oriented development and content management. IS implementation results proved shortening terms and reducing costs of implementation compared to commercial software available.

2006-01-01

127

Software systems in-house integration: Architecture, process practices, and strategy selection

In this work it is intended a methodology to validate a new version of the software used for monitoring the reactor core, which requires of the evaluation of the thermal limits settled down in the Operation Technical Specifications, for the Unit 2 of Laguna Verde with ARTS (improvements to the APRMs, Rod Block Monitor and Technical specifications). According to the proposed methodology, those are shown differences found in the thermal limits determined with the new versions and previous of the core monitoring software. Author)

2005-07-01

128

British Library Electronic Table of Contents (United Kingdom)

As organizations merge or collaborate closely, an important question is how their existing software assets should be handled. If these previously separate organizations are in the same business domain - they might even have been competitors - it is likely that they have developed similar software systems. To rationalize, these existing software assets should be integrated, in the sense that similar features should be implemented only once. The integration can be achieved in different ways. Success of it involves properly managing challenges such as making as well founded decisions as early as possible, maintaining commitment within the organization, managing the complexities of distributed teams, and synchronizing the integration efforts with concurrent evolution of the existing systems.Th...

2007-01-01

129

SPASE Resource Description - the VHO - NASA

Open-source software accelerates bioinformatics

The potentials of the spherical sensor and nearby conductors are controlled by ... Incoming data are continuously monitored by algorithms in the software to ... launched together with FM5 (Rumba) by a Soyuz-Fregat rocket from Baikonur. ...

130

Online Privacy Statement : University of Minnesota

A report on the Wellcome Trust/Cold Spring Harbor Genome Informatics meeting, Cold Spring Harbor, USA, 7-11 May 2003.

2003-01-01

131

LLNL Site Specific ASCI Software Quality Engineering Recommended Practices Overview Version 1.0

voluntarily provided by you. Network Traffic Logs In the course of ensuring network security and consistent service for all users, the University employs software programs to...

2010-12-20

132

Hanford Environmental Information System (HEIS). Volume 2, Operator`s guide

''The LLNL Site-Specific Advanced Simulation and Computing (ASCI) Software Quality Engineering Recommended Practices VI.I'' document describes a set of recommended software quality engineering (SQE) practices for ASCI code projects at Lawrence Livermore National Laboratory (LLNL). In this context, SQE is defined as the process of building quality into software products by applying the appropriate guiding principles and management practices. Continual code improvement and ongoing process improvement are expected benefits. Certain practices are recommended, although projects may select the specific activities they wish to improve, and the appropriate time lines for such actions. Additionally, projects can rely on the guidance of this document when generating ASCI Verification and Validation (VSrV) deliverables. ASCI program managers will gather information about their ...

2002-02-01

133

Evaluation of routine telephone transmission of nuclear medicine studies

This report discusses the procedures that establish the configuration control processes for the Hanford Environmental Information System (HEIS) software. The procedures also provide the charter and function of the HEIS Configuration Control Board (CCB) for maintaining software. The software configuration control items covered under these procedures include the HEIS software and database structure. The configuration control processes include both administrative and audit functions. The administrative role includes maintaining the overall change schedule, ensuring consistency of proposed changes, negotiating change plan adjustments, setting priorities, and tracking the status of changes. The configuration control process audits to ensure that changes are performed to applicable standards.

1994-01-14

134

Ensuring GRID resource availability with the SAM framework in LHCb

Rapid and reliable transmission of nuclear medicine studies using conventional telephone lines and commercially available modems and computer systems has been accomplished through use of software developed within the authors' hospital. Original digital images of all-night and weekend studies, acquired on any of the acquisition computers from different manufacturers, are now routinely sent for remote reading at the physician's home. Data, software, and letters are routinely exchanged using modems and standard telephone lines with a sister institution in Haifa, Israel. The software has been designed to achieve no loss data compression and minimal turnaround time loss. Thus, an average lung perfusion image or gallbladder study requires about 1-3 minutes of transmission time. Full analysis and display software is available on the remote computer.

1989-01-01

135

Effective Software Reuse in an Embedded Realtime System

The LHCb experiment has chosen to use the SAM framework (Service Availability Monitoring Environment from EGEE-II) [1] make extensive tests of the LHCb environment at all the accessible grid resources. The availability and the proper definition of the local Computing and Storage Elements, user interfaces as well as the WLCG software environment are checked. The SAM framework is also used to pre-install the LHCb applications in the shared software area provided by each site. The deployment of the LHCb applications is based on a python tool developed inside the experiment. It is used for software management including incremental installation of interdependent packages and clean package removal. After the application software is installed a validation test of the whole MC chain is run. According to the results of the experiment specific SAM tests, the sites are (re)integrated into the LHCb production ...

2008-01-01

136

Dynamic clamp with StdpC software

... Many of the functions required of the SMB are JANAP-128,-JINTACCS). The SMB can also get similar to other military message processing systems ...

1993-02-01

137

Design of a Knowledge Driven HIS

Dynamic clamp is a powerful method that allows the introduction of artificial electrical components into target cells to simulate ionic conductances and synaptic inputs. This method is based...Full Text Available

2011-03-01

138

Data - SPASE Resource Description

Design of the software architecture for a knowledge driven HIS is presented. In our design the frame has been used as the basic unit of knowledge representation. The structure of the frame is being...Full Text Available

1987-11-04

139

Content analysis of cancer blog posts*

Feb 23, 2011 ... The potentials of the spherical sensor and nearby conductors are ... Incoming data are continuously monitored by algorithms in the software to ..... together with FM6 (Salsa) by a Soyuz-Fregat rocket from Baikonur. ...

140

CDC - Cancer - NPCR - Registry Plus(tm) Software Programs for...

Objectives:The efficacy of user-defined subject tagging and software-generated subject tagging for describing and organizing cancer blog contents was explored.Methods:The...Full Text Available

2009-10-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

141

VEHICLE OPERATION PLAN PREPARATION INFORMATION, RECORDING MEDIUM, AND VEHICLE OPERATION PLAN PREPARATION DEVICE

Malignancies Breast Malignancies Bladder, Prostate, and Testicular Malignancies Uses of Cancer Registry Data Brain Tumor Reporting Training Materials Overview Presentation and...

2011-10-15

142

J-STORE (Japan)

Full Text Available

2007-11-22

143

Secondary fuel for power generation - preparation, technology, cost; Sekundaerbrennstoff zur energetischen Verwertung - Aufbereitung, Technik, Kosten

PLZT Ceramics Prepared from Conventional and Microwave Hydrothermal Powders

No abstract prepared.

2001-07-01

144

Impact of focussed ion beam (FIB) preparation on the potential structure of silicon semiconductors

PLZT Ceramics Prepared from Conventional and Microwave Hydrothermal Powders

1999-01-01

145

MR-based volumetric analysis of small tumor volumes: accuracy of phantom examinations of simulated eye tumors; Evaluierung der MR-Volumetrie kleiner Volumina am Beispiel von Augentumoren mittels Phantomuntersuchungen

No abstract prepared.

2006-07-01

146

The application of virtual instruments technique in U-H_2 experimental system

Purpose: The determination of tumor volume in ocular tumors is very important for the planning and success of radiation therapy. This study uses an animal model to evaluate the accuracy of MR-based volumetry of ocular tumors. Materials and methods: In a total of 25 porcine eyes obtained from the slaughterhouse, ocular tumors were produced by injecting a mixture of hand creme and Gd-DTPA under ophthalmoscopic guidance. The injected volume varied between 0.05 ml and 2.7 ml. The eyes were examined with a 1.5 Tesla scanner and a 4 cm circular surface coil especially developed for ocular MRI. After data transfer to a separate workstation, volumetric analysis was carried out by three independent radiologists using semiautomated software. The determined volume was compared with the injected volume. Results: Of the 25 prepared porcine eyes, 23 were suitable for volumetric analysis. The injection of the mixture of hand creme and GD-DTPA produced two ...

2003-07-01

147

The LLNL computer control system

The concept of the modern data acquisition system and some functional specialties of the programming software--Visual Basic 6.0 are introduced. The construction and theory of the hardware and the designing principle of the software are described. Experimental results showed that the real-time data acquisition rate was as high as 10 times per second in the system. And the relative standard uncertainty of the measurement was less than 0.5%. (authors)

2004-11-01

148

Overview of IAEA year 2000 activities in the Department of Safeguards

Lawrence Livermore National Laboratory (LLNL) has implemented a computer control system for operation of an FN tandem accelerator. The control software utilized is the Thaumaturgic Automated Control Logic (TACL) written by the Continuous Electron Beam Accelerator Facility and co-developed with LLNL. Details of the design philosophy, hardware configuration, control software, and special control algorithms will be presented. 2 refs., 4 figs.

1991-10-03

149

Internal interface for RFC muon trigger electronics at CMS experiment

The IAEA Department of Safeguards established a project in 1996 for the year 2000 (Y2K) conversion activities. This project covered assessment, conversion and testing of the software applications, instrument evaluation software, embedded systems and Personal Computer (PC) hardware attached to various equipment. Significant progress has been made in converting the applications and instruments to be year 2000 compliant. At the same time Member states have made an effort as well in converting the systems used jointly at the facilities

1999-02-01

150

Flux mapping system for TAPS 3 and 4: software perspective

The paper describes design and practical realization of an internal communication layer referred to as the Internal Interface (II). The system was realized for the RFC Muon Trigger of the CMS experiment. Fully automatic implementation of the communication layer is realized in the FPGA chips and in the control software. The methodology of implementation was presented in the description form of the interface structure from the sides of hardware and software. The examples of the communication layer realizations were given for the RFC Muon Trigger.

2004-01-01

151

Computer analysis and control for nondestructive gamma scanning of LMFBR fuel pins

The Flux Mapping System (FMS) of 540 MWe PHWR is a system, which is first of its kind used in Indian PHWRs. It is used to compute a detailed flux/power distribution of the reactor core using modal synthesis method .The paper brings out the high availability features of FMS and the software design philosophy. The paper emphasizes on framework based reusable architectural design, which simplifies and speeds up the development of data acquisition systems. (author)

2010-02-01

152

An approach to software quality assurance for robotic inspection systems

A program to modernize existing computer control and data analysis in a precision gamma-scanning system is described. This involves interfacing a new computer-based multichannel analyzer to existing equipment through a CAMAC system with an intelligent crate controller and writing software for scan control and data reduction. Both hardware and software requirements are discussed. 6 figures.

153

Qualifying codes under software quality assurance: Two examples as guidelines for codes that are existing or under development

Software quality assurance (SQA) for robotic systems used in nuclear waste applications is vital to ensure that the systems operate safely and reliably and pose a minimum risk to humans and the environment. This paper describes the SQA approach for the control and data acquisition system for a robotic system being developed for remote surveillance and inspection of underground storage tanks (UST) at the Hanford Site.

1993-11-14

154

A Novel Domperidone Hydrogel: Preparation, Characterization, Pharmacokinetic, and Pharmacodynamic Properties

Software quality assurance is an area of concern for DOE, EPA, and other agencies due to the poor quality of software and its documentation they have received in the past. This report briefly summarizes the software development concepts and terminology increasingly employed by these agencies and provides a workable approach to scientific programming under the new requirements. Following this is a practical description of how to qualify a simulation code, based on a software QA plan that has been reviewed and officially accepted by DOE/OCRWM. Two codes have recently been baselined and qualified, so that they can be officially used for QA Level 1 work under the DOE/OCRWM QA requirements. One of them was baselined and qualified within one week. The first of the codes was the multi-phase multi-component flow code TOUGH version 1, an already existing code, and the other was a geochemistry transport code ...

1993-04-25

155

Preliminary study of the {alpha} ratio measurement, ratio of the neutron capture cross section to the fission one for {sup 233}U, on the PEREN platform. Development and study of the experimental setup; Etude preliminaire de la mesure du rapport {alpha}, rapport de la section efficace moyenne de capture sur celle de fission de l'{sup 233}U, sur la plateforme PEREN. Developpement et etude du dispositif experimental

The purpose of the present study was to prepare a novel domperidone hydrogel. The domperidone dispersion was prepared by the solvent evaporation method. The characteristics of domperidone dispersion...Full Text Available

2011-01-01

156

DEVELOPMENT OF TECHNOLOGIES AND ANALYTICAL CAPABILITIES FOR VISION 21 ENERGY PLANTS

Producing nuclear energy in order to reduce anthropic CO{sub 2} emission and to meet high energy demand, implies three conditions to the nuclear plants of the IV. generation: safety improvements, radioactive waste minimization, and fuel breeding for a sustainable use of the resources. The Thorium fuel cycle used in Molten Salt Reactors seems promising. Many numerical studies based on probabilistic codes are carried out in order to analyse the behaviour of such reactors. Nevertheless, one of the most important parameters is badly known: the alpha ratio of {sup 233}U, ratio of the neutron capture cross section to fission one for {sup 233}U. This key-parameter is necessary to calculate the breeding ratio and thus, the deployment capacities of those reactors. This Ph-D thesis was intended to prepare a precise measurement of the alpha ratio of {sup 233}U between 1 eV and 10 keV. Preliminary measurements have been performed on the experimental platform PEREN. This ...

2007-12-15

157

{omega} meson production at the Time-Of-Flight spectrometer

The goal of this DOE Vision-21 project work scope is to develop an integrated suite of software tools that can be used to simulate and visualize advanced plant concepts. Existing process simulation software does not meet the DOE's objective of ''virtual simulation'' which is needed to evaluate complex cycles. The overall intent of the DOE is to improve predictive tools for cycle analysis, and to improve the component models that are used in turn to simulate the cycle. Advanced component models are available; however, a generic coupling capability that will link the advanced component models to the cycle simulation software remains to be developed. In the current project, the coupling of the cycle analysis and cycle component simulation software will be based on an existing suite of programs. The challenge is to develop a general-purpose ...

2002-08-31

158

Zinc-air battery technology: Combination of mechanical and electrical recharge

No abstract prepared.

2002-03-01

159

X-ray production yield in standardized thick target PIXE

No abstract prepared.

2000-07-01

160

Wavepro : a new approach to the design of data processing work flows.

No abstract prepared.

2003-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

161

WATER AND MAGMA CAN MIX - A HISTORY OF THE CONCEPTS OF HYDROVOLCANISM

No abstract prepared.

2010-07-01

162

VO{sub 2}(B) as a cathode material for lithium battery

No abstract prepared.

2000-09-01

163

Track reconstruction in the hexagonal drift chamber at COSY-11

No abstract prepared.

2002-07-01

164

Theory of the spiral grooved thrust bearing with liquid or gas lubricant

No abstract prepared.

2002-03-01

165

The study on the methods of environmental monitoring using NAA

No abstract prepared.

2003-07-01

166

The devise of the neutron camera for convenient to confirm a sample position

No abstract prepared

1998-01-01

167

The Quality Characteristics of Beef Jerky prepared with Various Spices

No abstract prepared.

2000-10-01

168

The PISA experiment-spallation products identified by Bragg curve spectroscopy

Full Text Available

2004-10-01

169

The Lancashire coalfield, 1945-1972: the politics of industrial change

No abstract prepared.

2004-07-01

170

Testing of the high current implantator of nitrogen ions

No abstract prepared.

2001-06-01

171

Synthetic and bioengineered products in nuclear medicine and drug delivery

No abstract prepared

1999-10-01

172

Supragiottic laryngeal tumors: comparison of MSCT with surgery and histology

No abstract prepared.

1999-07-01

173

Study of quantum chemical calculation of actinide compounds

No abstract prepared.

2002-02-01

174

Study of cement matrices for the immobilization of evaporator concentrates

No abstract prepared

1998-01-01

175

Studies of High-K Isomers at TRIUMF-ISAC

No abstract prepared

1998-12-31

176

Structure studies of acidic galactan from Pomacea sp

No abstract prepared.

2004-03-04

177

Structure and inflammatory activity of acidic galactan from Pomacea sp

No abstract prepared.

2006-07-01

178

Solid-state NMR on polymers and quantum computing NMR

No abstract prepared.

2008-07-01

179

Solid-state NMR Techniques for Chemistry Research

No abstract prepared.

2005-07-01

180

Size-Fractionated Plutonium Isotopes in a Coastal Environment

No abstract prepared.

2000-09-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

181

Single-Molecule Dynamics of Conformational Changes in Flavin Adenine Dinucleotide

No abstract prepared.

2000-09-22

182

Selectivity of lithium isotopes on semicrystalline titanium (IV) phosphate

No abstract prepared.

2005-01-12

183

STRUCTURAL REORGANIZATION IN FILMS OF CELLULOSE DERIVATIVES IN THE PRESENCE OF COLLOIDAL PARTICLES

No abstract prepared.

2001-01-01

184

SC04 network security wrap-up.

No abstract prepared.

2004-01-01

185

Revised plan : recommended investigation at Navarre, Kansas.

No abstract prepared.

2005-02-01

186

Reactor control system using knowledge information

No abstract prepared.

2006-01-31

187

Radiation cryochemistry of cubic ice; Kriochemia radiacyjna lodu kubicznego

No abstract prepared

1998-01-01

188

Production of reducing oligosaccharides from galactan biopolymers

No abstract prepared

1998-12-31

189

Present status of containment integrity tests at NUPEC

No abstract prepared.

2006-07-01

190

Preparation of colloidal silver nanoparticles in poly(N-vinylpyrrolidone) by ?-irradiation

No abstract prepared.

2000-11-01

191

Preliminary calculations for MOX fuel critical experiments in TCA

Not Available

2008-09-01

192

Predictive maturity of computer models using functional and multivariate output

No abstract prepared.

2000-01-01

193

Power plants: future will be safe; Kraftwerke: Zukunft in Sicherheit

No abstract prepared.

2008-01-01

194

Ports close hauled; Haefen hart am Wind

No abstract prepared.

2006-08-15

195

Plasma nitriding of ASTM F138 biomaterial - corrosion study

No abstract prepared.

2010-11-15

196

Planning for an Integrated Program of Scientific Research on Global Environmental Change

No abstract prepared.

2006-07-01

197

Pipe whip transient analysis of the ignalina NPP.

No abstract prepared.

2003-07-08

198

Performance of the central calorimeter of the COSY-TOF detector

No abstract prepared.

2002-05-15

199

Pectins from medicinal plants and their anti-ulcer activity

No abstract prepared.

2002-03-01

200

PREPARATION METHOD OF POLYMER-SUPPORTED CHIRAL ZIRCONIUM CATALYST

No abstract prepared.

2008-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

201

J-STORE (Japan)

Full Text Available

2008-09-26

202

On the determination of the equilibrium melting temperature of polybutylene terephthalate (PBT)

On duality of the noncommutative supersymmetric Maxwell-Chern-Simons theory

No abstract prepared.

2004-07-01

203

Nuclear safety and international governance. Russia and Eastern Europe

No abstract prepared.

2008-07-01

204

New technologies for managing oil field wastes.

No abstract prepared

1999-06-01

205

Neutron activation analysis of ultra-trace elements. 2

No abstract prepared.

2000-10-25

206

Monitoring of the relative beam polarization at COSY-11

No abstract prepared

1998-01-01

207

Mobile Smart Meter; Mobile Smart Meter

No abstract prepared.

2002-03-01

208

Migration behavior of trace elements with geothermal sources

No abstract prepared.

2010-06-15

209

Microorganisms elimination in antiquity paper by gamma irradiation

No abstract prepared

1998-01-01

210

Metal dusting induced pitting in Alloy 800.

No abstract prepared.

2002-07-01

211

Mechanisms behind the rise and fall of sideflow at SIS energies

NO abstract prepared.

2005-01-01

212

Measurement of crack growth rate of magnesium alloy AZ31

No abstract prepared.

2002-07-01

213

MECHANICAL DESIGN OF THE SPALLATION NEUTRON SOURCE COUPLED CAVITY ACCELERATOR

No abstract prepared.

2005-07-01

214

Learning from Europe; Lernen von Europa

No abstract prepared.

2001-06-01

215

Large interaction of cytochrome-c with cardiolipin/DPPC vesicles by SAXS

No abstract prepared.

2010-09-15

216

LOS ALAMOS PLUTONIUM FACILITY WASTE MANAGEMENT SYSTEM

No abstract prepared.

2008-11-15

217

Kevlar and carbon composite body armor - analysis and testing.

No abstract prepared.

2000-01-01

218

Investigation of the a{sub 0}{sup +}(980) resonance at ANKE

No abstract prepared.

2005-07-01

219

International Workshop of the Physics of Compressible Turbulent Mixing

No abstract prepared.

2002-03-01

220

Influence of irradiation on thermally stimulated current in PEEK

No abstract prepared.

2001-11-28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

221

Induction of self-compatible buckwheat by ion beams

No abstract prepared

1998-01-01

222

InP-quantum dots in AlGaInP

No abstract prepared.

2003-03-01

223

Implementation of a new data acquisition system at COSY-TOF

No abstract prepared.

2006-07-01

224

Hydrogen Systems Analysis, Education, and Outreach Activities

No abstract prepared.

2002-03-01

225

Heat transfer augmentation in channels with porous copper inserts.

No abstract prepared.

2000-02-02

226

Gluing Feynman diagrams in NDIM: insights into the three-point vertex

No abstract prepared.

1998-05-19

227

Geothermal Heat Pump Design Tool Benchmarking

No abstract prepared.

2008-07-01

228

Formation of Stable Chlorinated Hydrocarbons in Weathering Plant Material

No abstract prepared.

2000-08-01

229

Fly Ash Amendments Catalyze Soil Carbon Sequestration

No abstract prepared.

2005-08-22

230

First experiments with the Rossendorf Si-ball RoSiB

No abstract prepared.

2003-09-15

231

Final Report - Summary of Executive Policy Forum on Electricity Restructuring

No abstract prepared

1999-10-01

232

Fast Flux Test Facility (FFTF) Shutdown Activities

No abstract prepared.

2001-04-01

233

Fast Flux Test Facility (FFTF) Background & Status

No abstract prepared.

2001-06-01

234

Experimental and numerical study of colloid transport in a single fracture.

No abstract prepared.

2001-06-01

235

Eta-nucleus final state interaction studies

No abstract prepared.

2005-02-01

236

Eta-nucleus bound state study and the detector ENSTAR

No abstract prepared.

2002-03-01

237

Estimation of the radiation damages of the Uppsala spectator detector

No abstract prepared.

2002-03-01

238

Epigenetic changes accompanying human mammary epithelial cell Immortalization

No abstract prepared.

2002-03-01

239

Electromagnetic excitations in nuclei: From photon scattering to photo-dissociation

No abstract prepared.

2000-10-03

240

Efficiency of the second scintillator plane of the ANKE forward detector

No abstract prepared.

2006-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

241

Determination of the ANKE forward detector MWPC efficiency

No abstract prepared.

2002-03-01

242

DENSITY ANOMALIES IN THIN LIQUID FILMS OF HYDRIDE FUNCTIONAL SILOXANES

No abstract prepared.

2002-03-01

243

Content and distribution of hydrogen in anodic alumina films

No abstract prepared.

2002-01-01

244

Conserved currents and dualities in a covariant phase-space dynamics

No abstract prepared

1998-01-01

245

Computer model improves real-time management of water quality

No abstract prepared.

2007-07-01

246

Complex geometry, duality and non-perturbative structures in superstring theory

No abstract prepared.

1999-07-21

247

Combinatorial Spray-Based Synthesis of PEM FC Electrocatalysts

No abstract prepared.

1998-07-01

248

Close-to-threshold {phi} production at COSY-11

No abstract prepared.

2003-11-02

249

Chemical solution deposition of PLZT films on base metal foils.

No abstract prepared.

2002-03-01

250

Characterization of crystalline structure of electrodeposited ZnO thin films

No abstract prepared.

2003-11-07

251

CATALYSTS FOR HIGH CETANE ETHERS AS DIESEL FUELS

No abstract prepared.

2010-07-01

252

Biological Surface-Active Substance

No abstract prepared.

1999-09-01

253

International Science & Technology Center (ISTC)

Development of biological preparation with surfactant activity

254

Biogas in the natural gas grid; Biogas im Erdgasnetz

Arabinogalactans isolated from the medicinal plant Maytenus ilicifolia

No abstract prepared.

2007-03-15

255

An X-ray and neutron reflectometry study of multilayers

No abstract prepared.

2006-07-01

256

Advanced Direct Liquefaction Concepts Program Phase II

No abstract prepared.

1998-09-01

257

Acidic heteroxylans from medicinal plants and their antiulcer activity

No abstract prepared.

2002-11-30

258

ASC HPEMS Xyce circuit simulator : linear solver technology.

No abstract prepared.

2008-07-01

259

A review of in-situ chemical oxidation and heterogeneity

No abstract prepared.

2004-06-01

260

A review of Monte Carlo criticality calculations - convergence, bias, statistics

No abstract prepared.

2003-02-03

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

261

A precision experiment to measure the {eta}-meson mass

No abstract prepared.

2008-01-01

262

A Technology Roadmap for Generation IV Nuclear Energy Systems

No abstract prepared.

2002-03-01

263

A Study on the Preparation of Tritium Luminous Compound

No abstract prepared.

2002-12-01

264

A Guide to Experimental Elementary Particle Physics Literature 1994-1998

Full Text Available

1972-12-01

265

14 MeV neutron irradiation effects on window materials

No abstract prepared.

1999-10-01

266

Preparation of carrier-free yttrium-88 from strontium target by solvent extraction

No abstract prepared

1998-01-01

267

Abrasion problems in coal preparation

... carrier-free isotopes chemical preparation gamma spectra isotope production

268

VIPEX (Vital-area Identification Package EXpert) Software Verification and Validation

Lining of fused cast basalt tiles is recommended for various pieces of equipment constituting a coal preparation plant.

1981-01-01

269

The new Tevatron beam position monitor front-end software

The purposes of this report are (1) to perform a Verification and Validation (V and V) test for the VIPEX(Vital-area Identification Package EXpert) software and (2) to improve a software quality through the V and V test. The VIPEX was developed in Korea Atomic Energy Research Institute (KAERI) for the Vital Area Identification (VAI) of nuclear power plants. The version of the VIPEX which was distributed is 3.2.0.0. The VIPEX was revised based on the first V and V test and the second V and V test was performed. We have performed the following tasks for the V and V test on Windows XP and VISTA operating systems: ? Testing basic functions including fault tree editing ? Testing all kind of functions ? Research for update from Visual BASIC 6.0 to Visual BASIC 2008

2003-12-01

270

Startup of the experimental physics industrial control system at NSTX

The Tevatron is a proton anti-proton accelerator collider operating at the Fermi National Accelerator Laboratory. The machine is currently delivering beam for the CDF and D0 experiments, which expect increasing luminosity until the conclusion of Run II, planned for 2009. The Laboratory defined a plan for achieving higher luminosity, and one of the tasks is the upgrade of the accelerator's beam position monitor (BPM). The Tevatron was built during the early eighties and some of its control systems, including the BPMs, are still the original ones. This paper describes the front-end software of the Tevatron BPM upgrade, from the requirements to the implementation, and the underlying hardware setup. The front-end software designed is presented, emphasizing its modularity and reusability, allowing it to be applied to other Fermilab machines.

2005-05-01

271

Imaging automation and volume tomographic visualization at Texas Neutron Imaging Facility

The Experimental Physics Industrial Control System (EPICS) is a set of software which is being used as the basis of the National Spherical Torus Experiment's (NSTX) Process Control System, a major element of the NSTX's Central Instrumentation and Control System. EPICS is a result of a co-development effort started by several US Department of Energy National Laboratories. EPICS is actively supported through an international collaboration made up of government and industrial users. EPICS' good points include portability, scalability, and extensibility. A drawback for small experiments is that a wide range of software skills are necessary to get the software tools running for the process engineers. The authors' experience in designing, developing, operating, and maintaining NSTX's EPICS (system) will be reviewed.

1999-12-17

272

Future directions in controlling the LAMPF-PSR Accelerator Complex at Los Alamos National Laboratory

A thermal neutron imaging facility for real-time neutron radiography and computed tomography has been developed at the University of Texas reactor. The facility produced a good-quality radiographs and two-dimensional tomograms. Further developments have been recently accomplished. Further developments have been recently accomplished. A computer software has been developed to automate and expedite the data acquisition and reconstruction processes. Volume tomographic visualization using Interactive Data Language (IDL) software has been demonstrated and will be further developed. Volume tomography provides the additional flexibility of producing slices of the object using software and thus avoids redoing the measurements.

1999-07-01

273

Environmental, scanning electron and optical microscope image analysis software for determining volume and occupied area of solid-state fermentation fungal cultures

Four interrelated projects are underway whose purpose is to migrate the LAMPF-PSR Accelerator Complex control systems to a system with a common set of hardware and software components. Project goals address problems in performance, maintenance and growth potential. Front-end hardware, operator interface hardware and software, computer systems, network systems and data system software are being simultaneously upgraded as part of these efforts. The efforts are being coordinated to provide for a smooth and timely migration to a client-sever model-based data acquisition and control system. An increased use of the distributed intelligence at both the front-end and operator interface is a key element of the projects. 2 refs., 2 figs.

1991-01-01

274

British Library Electronic Table of Contents (United Kingdom)

Abstract Here we propose a software for the estimation of the occupied area and volume of fungal cultures. This software was developed using a Matlab platform and allows analysis of high-definition images from optical, electronic or atomic force microscopes. In a first step, a single hypha grown on potato dextrose agar was monitored using optical microscopy to estimate the change in occupied area and volume. Weight measurements were carried out to compare them with the estimated volume, revealing a slight difference of less than 1.5%. Similarly, samples from two different solid-state fermentation cultures were analyzed using images from a scanning electron microscope (SEM) and an environmental SEM (ESEM). Occupied area and volume were calculated for both samples, and the results obtained w...

2011-01-01

275

Computerized management of time, tasks, and priorities

Communication Estimation for Hardware/Software Codesign

Even before Egyptian times, fiber and paper-based methods were used to manage time, tasks, and priorities. Papyrus and paper were effective in their time, but now is the time for the even more effective computer-based methods of time management. This study compares paper and computer methods of the management of time, tasks, and priorities. Discussed are recommended strengths of off-the-shelf software for time management. Integrated software is recommended. A case study of the use of idea processing software to manage publication tasks and priorities is examined. Illustrated--for classroom-style training--are uses of a computer to enhance the quality and increase the efficiency of the coordination of publications from conception and research to printing and issuance. 3 refs., 43 figs.

1988-01-01

276

DEFF Research Database (Denmark)

This paper presents a general high level estimation model of communication throughput for the implementation of a given communication protocol. The model, which is part of a larger model that includes component price, software driver object code size and hardware driver area, is intended to be general enough to be able to capture the characteristics of a wide range of communication protocols and yet to be sufficiently detailed as to allow the designer or design tool to efficiently explore tradeoffs between throughput, bus widths, burst/non-burst transfers and data packing strategies. Thus it provides a basis for decision making with respect to communication protocols/components and communication driver design in the initial design space exploration phase of a co-synthesis process where a large number of possibilities must be examined and where fast estimators are therefore necessary. The fill model allows for additional (money) cost, software ...

1998-01-01

277

Assurance and assessment techniques for nuclear weapon related software

"Advanced" data reduction for the AMBER instrument

Sandia National Laboratories has the qualification evaluation responsibility for the design of certain components intended for use in nuclear weapons. Specific techniques in assurance and assessment have been developed to provide the quality evidence that the software has been properly qualified for use. Qualification Evaluation is a process for assessing the suitability of either a process used to develop or manufacture the product, or the product itself The qualification process uses a team approach to evaluating a product or process, chaired by a Quality Assurance professional, with other members representing the design organization, the systems organization, and the production agency. Suitable for use implies that adequate and appropriate definition and documentation has been produced and formally released, adequate verification and validation activities have taken place to ensure proper operation, and the software product meets all ...

1993-12-31

278

Validation of reactor core protection system

The amdlib AMBER data reduction software is meant to produce AMBER data products from the raw data files that are sent to the PIs of different proposals or that can be found in the ESO data archive. The way defined by ESO to calibrate the data is to calibrate one science data file with a calibration one, observed as close in time as possible. Therefore, this scheme does not take into account instrumental drifts, atmospheric variations or visibility-loss corrections, in the current AMBER data processing software, amdlib. In this article, we present our approach to complement this default calibration scheme, to perform the final steps of data reduction, and to produce fully calibrated AMBER data products. These additional steps include: an overnight view of the data structure and data quality, the production of night transfer functions from the calibration stars observed during the night, the correction of additional effects not taken into ...

2008-01-01

279

VAWT performance prediction - Description of a PC-based software

Reactor COre Protection System (RCOPS), an advanced core protection calculator system, is a digitized one which provides core protection function based on two reactor core operation parameters, Departure from Nucleate Boiling Ratio (DNBR) and Local Power Density (LPD). It generates a reactor trip signal when the core condition exceeds the DNBR or LPD design limit. It consists of four independent channels adapted a two-out-of-four trip logic. System configuration, hardware platform and an improved algorithm of the newly designed core protection calculator system are described in this paper. One channel of RCOPS was implemented as a single channel facility for this R and D project where we performed final integration software testing. To implement custom function blocks, pSET is used. Software test is performed by two methods. The first method is a 'Software Module Test' and the second method is a ...

2008-10-13

280

UNS YMSCP QA support task: Quarterly technical progress report, January 1, 1991--June 30, 1991

The Vertical Axis Wind Turbine (VAWT) offers a mechanically and structurally simple method of harnessing the energy of the wind. Fast and accurate predictions of the VAWT performance can be obtained using momentum models. Aerodynamic streamtube models are based on the conservation-of-momentum principle in a quasi-steady flow, by equating the forces of the rotor blades to the change in streamwise momentum through the turbine. An analytical model considering a multi-streamtube system divided into two parts has been developed to determine the aerodynamic blade loads and rotor performance of the Darrieus wind turbine (CARDAA computer code). This so-called double multiple-streamtube (DMS) model uses two constant interference factors in the induced velocities and accounts for vertical variations in the free stream velocity. It has been recently modified to produce an efficient software package appropriate for the needs of VAWT designers. This ...

1995-12-31

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

281

The feasibility of using pattern recognition software to measure the influence of computer use on the consultation

This report describes a quality assurance program plan for the Yucca Mountain Project. Aspects of the plan include: document control, equipment maintenance and calibration, process control, audits, computer software, and inspections. (CBS)

1991-07-30

282

Subject-specific, multiscale simulation of electrophysiology: a software pipeline for image-based models and application examples

BackgroundA key feature of a good general practice consultation is that it is patient-centred. A number of verbal and non-verbal behaviours have been identified as important to establish...Full Text Available

283

SEQADAPT: an adaptable system for the tracking, storage and analysis of high throughput sequencing experiments

Many simulation studies in biomedicine are based on a similar sequence of processing steps, starting from images and running through geometric model generation, assignment of tissue properties, numerical...Full Text Available

2009-06-13

284

Reuse Working Group - Earth Science Data Systems Working Groups - NASA

BackgroundHigh throughput sequencing has become an increasingly important tool for biological research. However, the existing software systems for managing and processing these data...Full Text Available

285

Programs Automate Complex Operations Monitoring - NASA

Al Fleig, PITA Analytic Sciences. 7th Earth Science Data Systems Working Group Meeting ..... The Reuse Industry in Brazil, CESAR, and the Reuse in Software ...

286

PFP MICON DCS computer software documentation

Mar 2, 2011 ... CCT's software is capable of simultaneously handling incoming ... has been using CCTK to automate its remote control rocket cryogenic fueling systems. ... seismic, infrared, and proximity sensor data with auto-tracking ...

287

Observatory: Cluster FM5 (Rumba) - SPASE Resource Description

This document contains the complete printout of the MICON A/S system configuration used in the Plutonium Finishing Plant. The document is divided into several volumes. Volume 1 covers the workstation display and configuration. All other volumes contain the controller configurations, or programs.

1996-03-26

288

Numerical optimization of spherical variable-line-spacing grating X-ray spectrometers

Feb 7, 2011 ... The potentials of the spherical sensor and nearby conductors are controlled ... Incoming data are continuously monitored by algorithms in the software ... together with FM8 (Tango) by a Soyuz-Fregat rocket from Baikonur. ...

289

Licensing experiences of safety critical software systems in nuclear applications a case study

Operation of an X-ray spectrometer based on a spherical variable-line-spacing (VLS) grating is analyzed using dedicated ray-tracing software allowing fast optimization of the grating parameters and...Full Text Available

2011-03-01

290

Licensing experiences of safety critical software systems in nuclear applications a case study

This paper summarizes results of reviews on the safety, critical software performed during the licensing process for the new Wolsung units. Each of these CANDU-type nuclear power plants has two micro-computerized shutdown systems. The SDS No. 1 program is graphically programmed in such a manner that its development process does not essentially differ from the design process of the conventional analog counterpart. This approach is understandable even to a reviewer in the regulatory agency without additional training in software engineering. The confidence in the reliability of this system is strengthened by the reverse verification and increased by extensive testing such as the reliability test. Concerning SDS No. 2, the development process is significantly influenced by the {open_quotes}software cost reduction project{close_quotes} of the U.S. naval research laboratory, and is, as a whole, clear and well structured except ...

1997-12-01

291

In Silico Atomic Tracing by Substrate-Product Relationships in Escherichia coli Intermediary Metabolism

This paper summarizes results of reviews on the safety, critical software performed during the licensing process for the new Wolsung units. Each of these CANDU-type nuclear power plants has two micro-computerized shutdown systems. The SDS No. 1 program is graphically programmed in such a manner that its development process does not essentially differ from the design process of the conventional analog counterpart. This approach is understandable even to a reviewer in the regulatory agency without additional training in software engineering. The confidence in the reliability of this system is strengthened by the reverse verification and increased by extensive testing such as the reliability test. Concerning SDS No. 2, the development process is significantly influenced by the software cost reduction project of the U.S. naval research laboratory, and is, as a whole, clear and well structured except for the modules related to ...

1997-06-01

292

Generating Stimuli for Neuroscience Using PsychoPy

We present a software system that computationally reproduces biochemical radioisotope-tracer experiments. It consists of three main components: A mapping database of substrate-product atomic correspondents...Full Text Available

2003-11-01

293

GENERAL REQUIREMENTS FOR SIMULATION MODELS IN WASTE MANAGEMENT

PsychoPy is a software library written in Python, using OpenGL to generate very precise visual stimuli on standard personal computers. It is designed to allow the construction of as wide a variety of...Full Text Available

294

Detecting variants with Metabolic Design, a new software tool to design probes for explorative functional DNA microarray development

Most waste management activities are decided upon and carried out in a public or semi-public arena, typically involving the waste management organization, one or more regulators, and often other stakeholders and members of the public. In these environments, simulation modeling can be a powerful tool in reaching a consensus on the best path forward, but only if the models that are developed are understood and accepted by all of the parties involved. These requirements for understanding and acceptance of the models constrain the appropriate software and model development procedures that are employed. This paper discusses requirements for both simulation software and for the models that are developed using the software. Requirements for the software include transparency, accessibility, flexibility, extensibility, quality assurance, ability to do discrete and/or continuous simulation, and efficiency. ...

2003-02-27

295

Designing a Component-Based Architecture for the Modeling and Simulation of Nuclear Fuels and Reactors

BackgroundMicroorganisms display vast diversity, and each one has its own set of genes, cell components and metabolic reactions. To assess their huge unexploited metabolic potential...Full Text Available

296

Computer-Assisted Discovery and Proof

Concerns over the environment and energy security have recently prompted renewed interest in the U.S. in nuclear energy. Recognizing this, the U.S. Dept. of Energy has launched an initiative to revamp and modernize the role that modeling and simulation plays in the development and operation of nuclear facilities. This Nuclear Energy Advanced Modeling and Simulation (NEAMS) program represents a major investment in the development of new software, with one or more large multi-scale multi-physics capabilities in each of four technical areas associated with the nuclear fuel cycle, as well as additional supporting developments. In conjunction with this, we are designing a software architecture, computational environment, and component framework to integrate the NEAMS technical capabilities and make them more accessible to users. In this report of work very much in progress, we lay out the 'problem' we are addressing, describe the ...

2009-11-01

297

Chapter 8 - Software ... - JPL Technical Reports Server - NASA

With the advent of powerful, widely-available mathematical software, combined with ever-faster computer hardware, we are approaching a day when both the discovery and proof of mathematical facts can be done in a computer-assisted manner. his article presents several specific examples of this new paradigm in action.

2007-12-10

298

CAMAC 488 module: 68,000 based GPIB interface module

These steps are based on work done by the AIAA. Space-Based Observation Systems Committee on Standards (SBOS COS) as well as work done in this ..... Surface Weapons Center, Code B-10, Dahlgren, VA, 22448. Although it had many ...

299

Automated Creation of Datamarts from a Clinical Data Warehouse, Driven by an Active Metadata Repository

What kind of hardware and software should be used to interface GPIB devices with the existing computer system. One idea was to use a commercially available Multibus card, BLC 8488 from National Semiconductor, whose on-board Z80 would manage the GPIB read/write functions and handshakes. With this card, one could make a hardware system which would consist of (1) CAMAC 080, (2) Multibus crate, (3) M. Shea's M68000, (4) M080, (5) BLC 8488 and (6) memory board. And the software considered for such a hardware package was GAS, which had been an established software package for communication between the ACNET computer system and smart CAMAC modules. However, a second idea was to put everything on a two-wide CAMAC module. The author pursued the second idea and came up with a two-wide CAMAC module called C488. The author describes the hardware - block diagrams, circuit blocks, front panel and hardware tests. He also refers ...

1985-03-01

300

An unsupervised classification method for inferring original case locations from low-resolution disease maps

A methodology and toolkit are described which enable the automated metadata-driven creation of datamarts from clinical data warehouses. The software uses schema-to-schema transformation driven by an...Full Text Available

1998-01-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

301

A Review on Sensor, Signal, and Information Processing ...

BackgroundWidespread availability of geographic information systems software has facilitated the use of disease mapping in academia, government and private sector. Maps that display...Full Text Available

302

Thermal modeling. Application to lithium batteries; Modelisation thermique. Application aux accumulateurs lithium

... Rep. ISIS-04-504, Institute for Software Integrated Systems (2004). [59] G. Simon, M. Maroti, A. Ledeczi, G. Balogh, B. Kusy, A. Nadas, G. Pap, J ...

2011-05-15

303

R&D prioritization and resource management for technology selection

The thermal modeling of electrochemical batteries is today an integral part of the design and validation operations of new products. The Li-ion pair allows to increase the power density of batteries but leads to higher heat fluxes during charging-output cycles. Thus, the thermal control has become more crucial and requires the use of modeling. SAFT and TSR companies are involved in this approach and use the ESACAP software. This paper presents this software which uses a nodal method for the modeling of the coupled thermal and electrical processes that take place inside elementary cells and batteries. (J.S.)

1996-12-31

304

Integration of an expert teaching assistant with distance learning software

This paper presents a decision approach, and associated computer software tools, for prioritizing and selecting among technology development activities. The approach elicits and then summarizes technology development preferences from stakeholders, and then integrates preferences into a set of funding recommendations. By formalizing the technology review process, the decision approach builds consensus and clarifies the basis for final budget decisions. The software development was conducted jointly by Pacific Northwest Laboratory and Decisions Science Associates, Incorporated. The Underground Storage Tank Integrated Demonstration funded the task; however, the approach should also be valuable to the US Department of Energy Office of Technology Development, the Office of Waste Management, and the Office of Environmental Restoration.

1994-03-01

305

GaP Project: #gamma#p, #gamma#e, #gamma##gamma# colliders physical programs and CompHEP computer system

The Remote Teaching Assistant (RTA) software currently under development at UC Davis allows students and Teaching Assistants (TA`s) to interact through multimedia communication via the Internet. To resolve the problem of TA unavailability and limited knowledge, an Expert Teaching Assistant (ETA) module is being developed. When TA`s are not on-line, students in need of help consult ETA. The focus of this research is the development and integration of ETA with RTA, the establishment of an architecture suitable for use with education (the domain) in any sub-domain (course), and the creation of a mechanism usable by non-technical personnel to maintain knowledge bases.

1996-12-31

306

Experiences with distributing graphic software between processors

The Gamma Physics (GaP) program of physical phenomena investigation is proposed on #gamma#p, #gamma#e and #gamma##gamma# colliders at TeV energies. The program contains specialized software (CompHEP system) created for automation of particle interaction processes calculations in the framework of various gauge models. Preliminary physical results are presented (heavy quark production, W, Z production, supersymmetry etc.), and further software development is suggested. (R.P.) 22 refs., 8 figs., 4 tabs.

307

Eliminating waste in software projects The enterprise 20 concept applied to lean software development

Software to aid the distribution and coordination of tasks between different processors was developed to distribute applications written in Fortran. This development led to the discovery of problems unique to Fortran and to interesting practical solutions. Two graphical applications were distributed to a variety of machines and machine pairs: CDC 7600-LSI/11, CRAY-LSI/11, VAX 11/780, and Apollo. These distributions pointed out several parameters such as the use of Fortran COMMON, communication parameters, and processing capabilities that can affect the successful distribution of applications.

1982-01-01

308

Development of RCM analysis software for Korean nuclear power plants

Knowledge management is controlling the transfer, distribution, and availability of knowledge. Traditionally, knowledge management processes are predefined; e.g. it is laid out in detail which document template, data structure, system, or work flow steps have to be used in order to manage knowledge. But knowledge management itself is complex. It is simply not possible to predefine the typical flow of work in knowledge intensive processes in advance. So rather than trying to determine the procedures it is more promising to analyze which factors can be used in order to control the outcome of t

2008-01-01

309

Case study for the evaluation and selection of man-machine interface (MMI) software

A software called KEPCO RCM workstation (KRCM) has been developed to optimize the maintenance strategies of Korean nuclear power plants. The program modules of the KRCM were designed in a manner that combines EPRI methodologies and KEPRI analysis technique. The KRCM is being applied to the three pilot system, chemical and volume control system, main steam system, and compressed air system of Yonggwang Units 1 and 2. In addition, the KRCM can be utilized as a tool to meet a part of the requirements of maintenance rule (MR) imposed by U.S. NRC. 3 refs., 4 figs. (Author)

1998-12-31

310

CLEO: a knowledge-based refueling assistant at FFTF

The authors evaluated three of the top man-machine interface (MMI) software systems. The main categories upon which they based their evaluation on were the following: operator interface; network and data distribution; input/output (I/O) interface; application development; alarms; real-time and historical trending; support, documentation, and training; processing tools (batch, recipe, logic); reports; custom interfacing; start-up/recovery; external database; and multimedia. They also present their MMI requirements and guidelines for the selection and evaluation of these MMI systems.

1996-06-01

311

Applications of Cerius2, software of molecular simulation; Aplicaciones de Cerius2, software de simulacion molecular

A computer software system, CLEO, is used to assist in the planning and performance of the reactor refueling operations at the Fast Flux Test Facility (FFTF). It is a recently developed application of artificial intelligence software with both expert systems and automated reasoning aspects. CLEO, an acronym for Cloned LEO, is a logic-based computer program written in Pascal. It imitates the processes that the refueling expert for FFTF performs in organizing the refueling of FFTF. The computer assistant seeks to organize the sequence of core component movements according to the rules and logic used by the expert. In this form, CLEO has aspects that tie it to both the expert systems and automated reasoning areas within the artificial intelligence field.

1985-11-10

312

An advanced NDA workstation for integrated safeguards

Most of the investigations have a theoretical sustenance based on molecular simulation. The area of application of molecular simulation is very wide, in the Materials Technology Department assigned to the Applied Sciences Management have been treated problems about metallic nano structures, glasses, interfaces, and molecules, to sustain and to explain some of the experimental results. Energy calculations are carried out to determine minimum energy structures, for later on to carry out calculations of some of their properties; as well as the images simulation of Electron microscopy and X-ray diffraction. (Author)

2007-07-01

313

Amazon.com: The Art of Application Performance Testing: Help for Programmers and Quality Assurance (9780596520663): Ian Molyneaux: Books

In this paper the authors describe the design and development of an advanced NDA workstation, which fits into an integrated data evaluation scheme for safeguards. This kind of instrument must be sort of an intelligent assistant to the inspection procedure, be able to generate as correct as possible measurements, guide the inspector throughout the procedure, and report descriptive data to the data evaluation system. The problem of improving the quality of the measurement is tackled using a simple expert system, which should convey in the instrument some of the physicist knowledge. The authors describe the hardware and software resources which were included in their design to reach the intended goal. A prototype of the machine has been built, and a preliminary software for Plutonium Isotopic Composition is under development.

1986-06-22

314

Wastenet

...com: The Art of Application Performance Testing : Help for Programmers and Quality Assurance (9780596520663): Ian Molyneaux: Books Amazon.com:...The Art of Application Performance Testing : Help for Programmers and Quality Assurance (9780596520663): Ian Molyneaux: Books Ian Molyneaux,The ...Art of Application Performance Testing : Help for Programmers and Quality Assurance,O'Reilly Media,0596520662,LA9780596520663,Computer Books: General,Application software,Computer software,...com: The Art of Application Performance Testing : Help for Programmers and Quality Assurance (9780596520663): Ian Molyneaux: Books ...

315

Target Diagnostic Instrument-Based Controls Framework for the National Ignition Facility

FFTF operations procedures preparation guide. Revision 2

NIF target diagnostics are being developed to observe and measure the extreme physics of targets irradiated by the 192-beam laser. The response time of target materials can be on the order of 100ps--the time it takes light to travel 3 cm--temperatures more than 100 times hotter than the surface of the sun, and pressures that exceed 109 atmospheres. Optical and x-ray diagnostics were developed and fielded to observe and record the results of the first 4-beam experiments at NIF. Hard and soft x-ray spectra were measured, and time-integrated and gated x-ray images of hydrodynamics experiments were recorded. Optical diagnostics recorded backscatter from the target, and VISAR laser velocimetry measurements were taken of laser-shocked target surfaces. Additional diagnostics are being developed and commissioned to observe and diagnose ignition implosions, including various neutron and activation diagnostics. NIF's diagnostics are being developed at LLNL and with collaborators at ...

2007-05-07

316

The Guide is intended to provide guidelines for the initial preparation of FFTF Operating Procedures. The Procedures Preparation Guide was developed from the plan presented and approved in the FFTF Reactor Plant Procedures Plan, PC-1, Revision 3.

1976-12-01

317

United ttsCos ur

The International Reference Preparation of Erythropoietin*

... floppy diskette message preparation - JANAP 128 and DD173 message preparation ... S including JANAP 128, DD173, and ACP 126. ...

2011-05-05

318

SOLID STATE RESEARCH OF THE APPLIED PHYSICS ...

The WHO Expert Committee on Biological Standardization authorized the National Institute for Medical Research to establish an International Reference Preparation of Erythropoietin on the basis of the...Full Text Available

1966-01-01

319

Preparation of covalently modified organic-inorganic composite nanoparticles and their interfacial electron transfer researches

... 10 TIN TELLURIDE Preparation of Tin Telluride Single Crystals ..... 12 ... TIN TELLURIDE Preparation of Tin Telluride Single Crystals ...

1962-07-16

320

Method for preparing thermally cleavable surfactants without deprotonation

Preparation of covalently modified organic-inorganic composite nanoparticles and their interfacial electron transfer researches

1998-01-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

321

Grit-Blast/Silane (GBS) Aluminum Surface Preparation for ...

The present invention describes surfactants of formula (I), ##STR00001## wherein R, R.sub.N, and m are defined herein, processes for their preparation, and methods for their decomposition.

2008-05-27

322

Exploration of Cold Extrusion for the Preparation of Enteric Minitablets of Isoniazid

... GRIT-BLAST/SILANE (GBS) ... GRIT-BLAST/SILANE (GBS) ALUMINUM SURFACE PREPARATION FOR STRUCTURAL ADHESIVE BONDING 5b. ...

2003-04-30

323

Defense.gov News Article: Task Force Prepares for Horn of ...

The objective of the present work was to formulate the enteric minitablets of isoniazid by cold extrusion method. The minitablets were prepared using isoniazid, hydroxylpropylmethylcellulose phthalate...Full Text Available

2008-05-01

324

Advanced Technological Education Program: 1999 Awards and Activities

... After the task force deploys, Joint Forces Command interacts ... and what needs tweaking to better prepare future headquarters staffs, Mungus ...

325

Composing simulations using persistent software components

... By developing and disseminating educational materials and curricula, supporting the preparation and ... education, such as curriculum or educational materials development, faculty or teacher preparation ...

326

Advanced Communication and Control for Distributed Energy Resource Integration: Phase 2 Scientific Report

The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context ...

1999-03-01

327

Universal remote access infrastructure for embedded systems; Universelle Fernzugriff-Infrastruktur fuer eingebettete Systeme

The objective of this research project is to demonstrate sensing, communication, information and control technologies to achieve a seamless integration of multivendor distributed energy resource (DER) units at aggregation levels that meet individual user requirements for facility operations (residential, commercial, industrial, manufacturing, etc.) and further serve as resource options for electric and natural gas utilities. The fully demonstrated DER aggregation system with embodiment of communication and control technologies will lead to real-time, interactive, customer-managed service networks to achieve greater customer value. Work on this Advanced Communication and Control Project (ACCP) consists of a two-phase approach for an integrated demonstration of communication and control technologies to achieve a seamless integration of DER units to reach progressive levels of aggregated power output. Phase I involved design and proof-of-design, and Phase II involves real-world ...

2008-09-30

328

Reliability assessment of embedded digital system using multi-state function

This article describes a flexible and extensible infrastructure for applying Web-Technologies to embedded systems.The presented approach develops a Three-level-Architecture consisting of the embedded system, the universal Remote-Access-Server and the Remote-Access-Client. A system-spanning general interface allows the binding of embedded systems in order to access their process data. Additionally, this procedure facilitates a flexible processing of the device data, so that it is ready to be used by different control devices. To ensure flexibility - connecting different devices on the one side and providing information for different clients like PC, PDA or mobile phone on the other side - a new XML-based description language (Service Description Markup Language - SDML) is introduced. The SDML documents contain information about connected embedded systems, reusable device data and the presentation policies for different clients. These documents are specifically created for each device. ...

2005-07-01

329

Reliability analysis of pipe whip impacts

This work describes a combinatorial model for estimating the reliability of the embedded digital system by means of multi-state function. This model includes a coverage model for fault-handling techniques implemented in digital systems. The fault-handling techniques make it difficult for many types of components in digital system to be treated as binary state, good or bad. The multi-state function provides a complete analysis of multi-state systems as which the digital systems can be regarded. Through adaptation of software operational profile flow to multi-state function, the HW/SW interaction is also considered for estimation of the reliability of digital system. Using this model, we evaluate the reliability of one board controller in a digital system, Interposing Logic System (ILS), which is installed in YGN nuclear power units 3 and 4. Since the proposed model is a generalized combinatorial model, the simplification of this model becomes the conventional model ...

2006-03-15

330

Regulatory requirements for design of safety related computer based control Systems in Indian PHWRs: case study of DPHS-PCS for TAPP-3 and 4

A probability-based approach is presented as the integration of probabilistic methods and deterministic modelling based on the finite element method. An existing finite element software package was linked to an existing probabilistic package to analyse the complex mechanics that occur during the transient non-linear analysis of impact problems. This methodology is applied to a pipe whip analysis of a group-distribution-header, which results from a guillotine break, and subsequent impact with the adjacent building wall; this is a postulated accident for the Ignalina Nuclear Power Plant RBMK-1500 reactors. The uncertainties of material properties, component geometry data and loads were taken into consideration. The probabilities of failure of the impacted header and of the header support-wall were estimated given uncertainties in material properties, geometrical parameters and loading. The software ProFES was used for the probabilistic analysis ...

2005-08-01

331

Energy Efficiency: The New Holy Grail of Data Management Systems Research

Computer based control systems for safety related applications in nuclear power plants have to meet not only the functional, performance and interface requirements, they in addition, have to meet regulatory requirements like enhanced reliability, safety and security and should provide fault tolerance, diagnostics and self-supervision. The control system architecture, hardware design and software design should meet requirements as specified in design code and guides of AERB. The Dual Processor Hot Standby Process Control System (DPHS-PCS) for TAPP-3 and 4 is a safety related (Class- IB) system. DPHS-PCS regulates PHT pressure, Pressuriser pressure, Pressuriser level, Bleed condenser pressure, Bleed condenser level and Steam generator pressure. The performance, reliability and safety requirements of this control system are met by employing a fault tolerant computer configuration developed for this purpose using hardware designed with facility for on-line diagnostics ...

2005-03-01

332

Combining anatomy and function: the path to true image fusion

Energy costs are quickly rising in large-scale data centers and are soon projected to overtake the cost of hardware. As a result, data center operators have recently started turning into using more energy-friendly hardware. Despite the growing body of research in power management techniques, there has been little work to date on energy efficiency from a data management software perspective. In this paper, we argue that hardware-only approaches are only part of the solution, and that data management software will be key in optimizing for energy efficiency. We discuss the problems arising from growing energy use in data centers and the trends that point to an increasing set of opportunities for software-level optimizations. Using two simple experiments, we illustrate the potential of such optimizations, and, motivated by these examples, we discuss general approaches for reducing energy waste. Lastly, we point out existing ...

2009-01-01

333

CleverFarm - A SuperSCADA system for wind farms

Modern imaging technologies visualize different aspects of disease in a non-invasive way. Considerable progress has been made in the fusion of images from different imaging modalities using software approaches. One goal of fusion software is to align anatomical and functional images and allow improved spatial localization of abnormalities. The resulting correlation of the anatomical and functional images may clarify the nature of the abnormality and help diagnose or stage the underlying disease. Whereas successful image fusion software has been developed for the brain, only limited success has been achieved for image alignment in other parts of the body. The development and current status of alternative approaches are presented. Dual-modality imaging is described with devices where two modalities are combined and mounted in a single gantry. The use of existing scanner technology ensures that no compromises are made in the ...

2001-10-01

334

Beyond Ada - generating Ada code from equational specifications

The CleverFarm project started out to build an integrated monitoring system for wind farms, where all information would be available and could be used across the wind farm for maintenance and component health assessments. This would enable wind farm operators to prioritise their efforts, since they have a good view of the farm status from home. A large emphasis was placed on the integration of condition monitoring approaches in the central system, enabling estimates of the remaining lifetime of components, especially in the nacelle. During the 3,5 years of the project, software and hardware was developed and installed in two wind farms in Denmark and Germany. The connected hardware included two different condition monitoring systems based on vibration sensors from Gram&Juhl and ISET, plus a camera system developed by Overspeed. Additionally, short-term predictions of the wind farm output were delivered by DMI and Risoes Prediktor system throughout the ...

2004-08-01

335

Assessing digital control system dependability using the dynamic flowgraph methodology

Real-time mission-oriented embedded systems are much more difficult to design than ordinary software systems. They require highly reliable and efficient implementations to satisfy mission and time constraints imposed by the applications. The Ada language was designed to facilitate real-time-system software development. However, for many programmers the size and complexity of Ada itself are of concern. In the assertive programming paradigm, computations are specified as sets of assertions about properties of the solution, and not as a sequence of procedural steps. Solving procedures are automatically generated from the assertive description. Real-time programming for mission-oriented systems is supported by equational languages in which assertions are expressed as algebraic equations. Programs written in equational languages are concise, free from implementation details, and easily amenable to verification and parallel processing. The level of ...

1987-01-01

336

Resource Management in Broadband Communication Networks

Dynamic Flowgraph Methodology (DFM) is a methodological approach to modeling and analyzing the behavior of software-driven embedded systems for the purpose of reliability/safety assessment and verification. The methodology has two fundamental goals: (a) to identify how certain postulated events may occur in a system and (b) to identify an appropriate testing strategy based on an analysis of system functional behavior. To achieve these goals, the methodology employs a modeling framework in which system models are developed in terms of causal relationships between physical variables and temporal characteristics of the execution of software modules. These models are then analyzed to determine how a certain state (desirable or undesirable) can be reached. This is done by developing timed fault trees, which take the form of logical combinations of static trees relating system parameters at different points in time. The prime implicants (multistate ...

1993-01-01

337

DEFF Research Database (Denmark)

This thesis - Resource Management in Broadband Communication Networks - deals with different ways of optimizing the available resources of data- or telecommunication networks. Especially topics like optimal routing, load balancing and fast recovery of routes in case of link failures are covered. The first part gives a brief description of some of the existing protocols for routing and controlling resources, such as RSVP, OSPF, BGP, PNNI, etc. The remaining part concerns the following two fundamentally different approaches to resource management etc.: - Software agents - Simulated ants In the beginning of the part concerning software agents a description of what exactly constitutes software agents, according to the scientists and according to the organization, FIPA is given. After this, the main results from the IMPACT project are presented. The IMPACT project is an EU-project that aimed at developing a demonstration ...

2003-01-01

338

Uranium Mass and Isotopic Analysis. A new drum tomographic gamma scanning system

Updating of the program for simulation of Darlington shutdown and regulation systems. Research report No. INFO-0309

The NIS-6 group at Los Alamos National Laboratory pioneered the development of Tomographic Gamma Scanning and continue to improve its utility in real measurement situations. Building on this experience we report the development of a state of the art TGS system suitable for industrial applications. The image reconstruction and visualization software has been integrated into the familiar Canberra NDA2000 software suite which also handles all other aspects of the data acquisition and management. In this paper we describe the salient design and performance parameters of the system. The application of gamma-ray tomography to safeguards for improved assay accuracy and knowledge confirmation is discussed. In particular we compare and contrast the relative merits of this TGS and a traditional Segmented Gamma Scanner and illustrate how the 3-D visualization of the TGS image can provide valuable additional information.

2003-05-01

339

To Beta Test, or Not to Beta Test: Is That the Question?

Description of the current status of the developments of a simulation of the Darlington Nuclear Generating Station shutdown and regulating systems, DARSIM. The DARSIM program simulates the spatial neutron dynamics, the regulations of the reactor power, and shutdown system 1 and shutdown system 2 software. The DARSIM program operates in the interactive simulation (INSIM) program environment. DARSIM was installed on the APOLLO computer at the Atomic Energy Control Board (AECB) and a version for an IBM-PC was also provided for the exclusive use of the AECB. Shutdown system software was updated to incorporate the latest revisions in the functional specifications. Additional developments were provided to assist in the use and interpretation of the DARSIM results.

1988-01-01

340

British Library Electronic Table of Contents (United Kingdom)

Purpose - The purpose of this paper is to help library technology staff understand the process of beta testing software, determine if it is appropriate for them to engage in the process, and provide suggestions on how to the time invested in the process. Design/methodology/approach - The paper explains what beta testing is, why it should be used and how to become a beta tester. Findings - The paper reveals that beta testing is not convenient for everyone, but those taking place in these activities should be thorough, positive and generous in order to maximize the return on investment in this kind of testing. Practical Implications - While beta testing new software features can take a significant amount of time, the resulting benefits of early access to new features and improved vendor-staf...

2008-01-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

341

The LCG PI project: using interfaces for physics data analysis

The LCG PI project using interfaces for physics data analysis

In the context of the LHC computing grid (LCG) project, the applications area develops and maintains that part of the physics applications software and associated infrastructure that is shared among the LHC experiments. The "physicist interface" (PI) project of the LCG application area encompasses the interfaces and tools by which physicists will directly use the software, providing implementations based on agreed standards like the analysis systems subsystem (AIDA) interfaces for data analysis. In collaboration with users from the experiments, work has started with implementing the AIDA interfaces for (binned and unbinned) histogramming, fitting and minimization as well as manipulation of tuples. These implementations have been developed by re-using existing packages either directly or by using a (thin) layer of wrappers. In addition, bindings of these interfaces to the Python interpreted language have been done using the dictionary subsystem ...

2005-01-01

342

Telescope performance near local midnight for the Japanese Advanced Meteorological Imager (JAMI)

In the context of the LHC Computing Grid (LCG) project, the Applications Area develops and maintains that part of the physics applications software and associated infrastructure that is shared among the LHC experiments. The "Physicist Interface" (PI) project of the LCG Application Area encompasses the interfaces and tools by which physicists will directly use the software, providing implementations based on agreed standards like the AIDA interfaces for data analysis. In collaboration with users from the experiments, work has started with implementing the AIDA interfaces for (binned and unbinned) histogramming, fitting and minimization as well as manipulation of tuples. These implementations have been developed by re-using existing packages either directly or by using a (thin) layer of wrappers. In addition, bindings of these interfaces to the Python interpreted language have been done using the dictionary subsystem of the LCG-AA/SEAL project. ...

2004-01-01

343

Staging Transformations for Multimodal Web Interaction Management

Raytheon's Santa Barbara Remote Sensing (SBRS) division designed and built the MTSAT-1R Japanese Advanced Meteorological Imager for the Japanese Ministry of Transport between March, 1999 and July, 2002. In order to meet the stressing requirements of a geosynchronous orbit, a combination of structural, thermal, and optical (STOP) analyses were used to design and optimize the beryllium three-mirror anastigmat (TMA) telescope. This modeling approach was used to characterize and minimize the thermal distortion around local midnight. On-orbit temperatures and structural deformations were predicted using thermal Desktop/SINDA and PATRAN/NASTRAN software, respectively. The resulting optical performance was evaluated using Raytheon developed HEXAGON software. The telescope design was successfully optimized to attain specified visible channel performance for most of the 24 hour orbit.

2005-01-01

344

Security features of a nuclear material accounting system

Multimodal interfaces are becoming increasingly ubiquitous with the advent of mobile devices, accessibility considerations, and novel software technologies that combine diverse interaction media. In addition to improving access and delivery capabilities, such interfaces enable flexible and personalized dialogs with websites, much like a conversation between humans. In this paper, we present a software framework for multimodal web interaction management that supports mixed-initiative dialogs between users and websites. A mixed-initiative dialog is one where the user and the website take turns changing the flow of interaction. The framework supports the functional specification and realization of such dialogs using staging transformations -- a theory for representing and reasoning about dialogs based on partial input. It supports multiple interaction interfaces, and offers sessioning, caching, and co-ordination functions through the use of an ...

2003-01-01

345

Optimal haulage routing of off-road dump trucks in construction and mining sites using Google Earth and a modified least-cost path algorithm

The Los Alamos Nuclear Material Accounting and Safeguards System (MASS) is a near-real-time accountability system for bulk materials, discrete items, and material undergoing dynamic processing. MASS has evolved from an eighty-column card based process control system to a very sophisticated computer system. The security of the MASS computer system is provide through various access controls. There are two kinds of access control to be addressed. They are physical access control to the hardware which make up the system, and access control to the software. There are many features which provide a measure of security to the hardware that will be discussed. Access to the software is controlled by a security password. Access to various transaction activities in the system is controlled through the level of MASS user privilege. Details of MASS user privilege will be discussed.

1988-01-01

346

British Library Electronic Table of Contents (United Kingdom)

This study presents new software, called Google Earth-based Optimal HAulage RouTing System (GEOHARTS), to improve the functionality of Google Earth for optimal haulage routing of off-road dump trucks in construction and mining sites. A modified least-cost path algorithm, which is applicable to working areas with both paved and unpaved temporary roads and can consider the effects of terrain relief and curves along a route on the route planning, was proposed and utilized for the software development. GEOHARTS can determine optimal haulage routes between loaders and dumps that ensure the least travel time or fuel consumption of off-road dump trucks and can visualize the results using an embedded 3D render window of Google Earth. The application to the Pasir open-pit coal mine in Indonesia dem...

2011-01-01

347

Navy Occupational Health Information Management System (NOHIMS). System/Functional Manager's guide

Mold heating and cooling microprocessor conversion. Final report

This guide is intended to provide the necessary guidance to successfully manage the NAVMED Navy Occupational Health Information Management System (NOHIMS) at NAVMED sites and the NAVSEA Occupational Safety and Health Record Keeping System (OSHRKS) at NAVSEA sites. Outlines procedures to manage system operations, procedures to resolve hardware, software and communications problems, and procedures outside the realm of system operations that are required for a successful system. This guide is intended for the System and Functional Managers use. The System Manager is the individual designated to provide overall ADP management to the entire local configuration. Usually responsible for file backup, daily operations of the CPU, security, supplies, equipment, operating software and technical ADP guidance to the local functional users.

1987-04-01

348

Implementation of improved interactive image analysis at the Advanced Photon Source (APC) linac.

Conversion of the microprocessors and software for the Mold Heating and Cooling (MHAC) pump package control systems was initiated to allow required system enhancements and provide data communications capabilities with the Plastics Information and Control System (PICS). The existing microprocessor-based control systems for the pump packages use an Intel 8088-based microprocessor board with a maximum of 64 Kbytes of program memory. The requirements for the system conversion were developed, and hardware has been selected to allow maximum reuse of existing hardware and software while providing the required additional capabilities and capacity. The new hardware will incorporate an Intel 80286-based microprocessor board with an 80287 math coprocessor, the system includes additional memory, I/O, and RS232 communication ports.

1995-07-01

349

Expected changes in agroclimatic conditions in Central Europe

An image-analysis system, based on commercially available data visualization software (IDL [1]), allows convenient interaction with image data while still providing calculated beam parameters at a rate of up to 2 Hz. Image data are transferred from the IOC to the workstation via EPICS [2] channel access. A custom EPICS record was created in order to overcome the channel access limit of 16k bytes per array. The user can conveniently calibrate optical transition radiation (OTR) and fluorescent screens, capture background images, acquire and average a series of images, and specify several other filtering and viewing options. The images can be saved in either IDL format or APS-standard format (SDDS [3]), allowing for rapid postprocessing of image data by numerous other software tools.

1998-09-11

350

British Library Electronic Table of Contents (United Kingdom)

During the past few decades, the basic assumption of agroclimatic zoning, i.e., that agroclimatic conditions remain relatively stable, has been shattered by ongoing climate change. The first aim of this study was to develop a tool that would allow for effective analysis of various agroclimatic indicators and their dynamics under climate change conditions for a particular region. The results of this effort were summarized in the AgriClim software package, which provides users with a wide range of parameters essential for the evaluation of climate-related stress factors in agricultural crop production. The software was then tested over an area of 114,000?km2 in Central Europe. We have found that by 2020, the combination of increased air temperature and changes in the amount and distribution ...

2011-01-01

351

Estimating pressurized water reactor decommissioning costs: A user`s manual for the PWR Cost Estimating Computer Program (CECP) software. Draft report for comment

Dimensioning of the cooling system of the capacitors operating in a high frequency antenna, through a finite element method; Dimensionnement du systeme de refroidissement des condensateurs d'une antenne a haute frequence, par la methode des elements finis

With the issuance of the Decommissioning Rule (July 27, 1988), nuclear power plant licensees are required to submit to the US Regulatory Commission (NRC) for review, decommissioning plans and cost estimates. This user`s manual and the accompanying Cost Estimating Computer Program (CECP) software provide a cost-calculating methodology to the NRC staff that will assist them in assessing the adequacy of the licensee submittals. The CECP, designed to be used on a personnel computer, provides estimates for the cost of decommissioning PWR plant stations to the point of license termination. Such cost estimates include component, piping, and equipment removal costs; packaging costs; decontamination costs; transportation costs; burial costs; and manpower costs. In addition to costs, the CECP also calculates burial volumes, person-hours, crew-hours, and exposure person-hours associated with decommissioning.

1993-10-01

352

Development of a support system for hydraulic maniford block design. Yuatsu manifold block yo sekkei shien system no kaihatsu

The aim of this work is the study of the heat transfer and of thermal behaviour of the HF (high frequency) components (in fact capacitors) of the ITER-proto-2005-FCI antenna. Preliminary results carried out with the Castem software show that it is possible to cool the hottest part of the antenna efficiently. A water flow (1 bar, 25 Celsius degrees) or an helium flow (10 bars, 50 Celsius degrees) permit to limit the maximal value of the temperature to 270 Celsius degrees. A second software Ansys has allowed the author to simulate capacitors with more complicated shapes. (A.C.)

2003-07-01

353

Application of probabilistic methods to validate NPP pipewhip impact simulations

This paper describes a newly developed software for manifold block design. Manifold block has become indispensable as an important component part to hydraulic systems since the 1970 {prime} s. However, its design is complicated and difficult. The reasons are firstly that hydraulic circuits have to be densely placed and secondary there is no means to correct a failure in the design or manufacture. Considering these points, the experiments of design engineers and the habitual design processes are analyzed, and a support system for manifold block design was developed by using a super-mini computer. With this system, the correctness of a design became to be proved. The software is easy to operate, and it can retrieve past design data, and it is extendible to the production line. 4 refs., 7 figs., 4 tabs.

1990-11-15

354

British Library Electronic Table of Contents (United Kingdom)

Piping in nuclear power plants is vital to the proper operation and safety of these facilities. To assure safety in the unlikely event of a pipe break, it is necessary to evaluate the consequences from the resulting whipping pipe on neighboring components and structures. Numerical simulations allow for rapid evaluation of these consequences. Before simulations can be accepted, however, the methodology and computer codes must be validated against experimental results. This paper uses a probabilistic approach to validate pipe whip simulations against limited experimental results. Probabilistic analysis software was developed and coupled to existing deterministic finite element software. An example of a whipping pipe impacting against a reinforced concrete slab was simulated. The described pr...

2006-01-01

355

Advances in Modeling of Scanning Charged-Particle-Microscopy Images

A study of H.263 traffic modeling in multipoint videoconference sessions over IP networks

Modeling artificial scanning electron microscope (SEM) and scanning ion microscope images has recently become important. This is because of the need to provide repeatable images with a priori determined parameters. Modeled artificial images are highly useful in the evaluation of new imaging and metrological techniques, like image-sharpness calculation, or drift-corrected image composition (DCIC). Originally, the NIST-developed artificial image generator was designed only to produce the SEM images of gold-on-carbon resolution sample for image-sharpness evaluation. Since then, the new improved version of the software was written in C++ programming language and is in the Public Domain. The current version of the software can generate arbitrary samples, any drift function, and many other features. This work describes scanning in charged-particle microscopes, which is applied both in the artificial image generator and the DCIC technique. As an ...

2010-01-01

356

British Library Electronic Table of Contents (United Kingdom)

This manuscript is a contribution on the modeling of H.263 traffic in multipoint videoconference sessions over IP Networks. Our study includes analysis and modeling assessment of extensive data gathered during realistic videoconference sessions between commercial H.263-compliant terminal clients (with different videoconference software packages installed). All terminal clients were communicating through a Multipoint Control Unit (software or hardware MCU) at `switched presence' mode and for comparative purposes the same typical videoconference content (a person speaking, with mild movement and occasional zoom/span) was used. The analysis of the H.263 data at the frame level suggests that the traffic from the different terminals to the MCU can be represented by a stationary stochastic proce...

2006-01-01

357

A Unified Model for Evolutionary Multiobjective Optimization and its Implementation in a General Purpose Software Framework: ParadisEO-MOEO

{sup 13}C-NMR signal enhancement by using parahydrogen induced polarization (PGIP) and appropriate pulse sequences

This paper gives a concise overview of evolutionary algorithms for multiobjective optimization. A substantial number of evolutionary computation methods for multiobjective problem solving has been proposed so far, and an attempt of unifying existing approaches is here presented. Based on a fine-grained decomposition and following the main issues of fitness assignment, diversity preservation and elitism, a conceptual global model is proposed and is validated by regarding a number of state-of-the-art algorithms as simple variants of the same structure. The presented model is then incorporated into a general-purpose software framework dedicated to the design and the implementation of evolutionary multiobjective optimization techniques: ParadisEO-MOEO. This package has proven its validity and flexibility by enabling the resolution of many real-world and hard multiobjective optimization problems.

2009-01-01

358

Usefulness of CT colonography in the preoperative evaluation of patients with distal occlusive colorectal carcinoma

No abstract prepared.

2009-07-01

359

Use of cozilat preparation as enteral nutrition for patients with late radiation injuries of colon

No abstract prepared.

2002-02-15

360

Ultraviolet dosimetry characterization from calcium doped borate glass-ceramic

Short note.

1988-06-28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

361

Twin Cities Army Ammunition Plant soil vapor extraction system : a post-audit modeling study.

No abstract prepared.

2006-07-01

362

Transformation of sulfur-containing organometallic complexes by free radicals formed in radiolysis of organic compounds

No abstract prepared.

2000-11-27

363

The sputtering deposition - CdTe/(Si, Gaas, Al{sub 2}O{sub 3})

No abstract prepared

1998-01-01

364

The progression from ionic to covalent bonding in disordered systems as studied by using neutron diffraction

No abstract prepared

1996-12-31

365

The non-equivalence between non-Abelian self-dual and Yang-Mills-Chern-Simons models

No abstract prepared

1998-12-31

366

The human melanocyte: A model system to study the complexity of cellular aging and transformation in non-fibroblastic cells

No abstract prepared.

2008-07-01

367

The coordination chemistry of technetium and rhenium and applications to nuclear medicine. Final report

No abstract prepared.

2002-05-23

368

Testing a passive revegetation approach for restoring coastal plain depression wetlands

No abstract prepared.

1996-12-31

369

Temporal Fluctuations of Fluorescence Energy Transfer between TwoDyes Conjugated to a Single Protein

No abstract prepared.

2006-01-01

370

TEMPERATURE-DEPENDENT DIELECTRIC MEASUREMENTS OF POLYACRYLONITRILE FIBERS DURING AIR OXIDATION (Paper)

No abstract prepared.

1999-01-04

371

Synthesis and structure of the (tetrahydroxy)oligosiloxane [(tBuO)3SiOSi(OH)2]2O

No abstract prepared.

2004-01-26

372

Study on the ageing process of the proportional counters; Badanie mechanizmu starzenia licznikow proporcjonalnych

No abstract prepared.

2000-01-25

373

Study of the Form Factor of the Proton in the Timelike Region for Large Momentum Transfers

No abstract prepared

1998-12-31

374

Study of nuclear fusion materials making use of ion irradiation and ESR microscope

No abstract prepared.

2001-01-01

375

Studies of {eta} production in proton proton collisions with the time of flight spectrometer

No abstract prepared

1998-01-01

376

Steam turbines for biomass power plants; Dampfturbinen fuer Biomasse-Kraftwerke

No abstract prepared.

2002-03-01

377

Status of the analysis of the (vector)pp {yields} pp{gamma} reaction channel

No abstract prepared.

2003-11-01

378

Stability of the ClO dimer; Stabilitaet des ClO-Dimers

No abstract prepared.

2002-03-01

379

Spent fuel sabotage aerosol ratio test program:status update, November 2004.

No abstract prepared.

2006-07-01

380

Spent fuel sabotage aerosol ratio test program : progress & status, May 2004.

No abstract prepared.

2004-11-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

381

Spent fuel sabotage aerosol ratio program : status, May 2005.

No abstract prepared.

2004-05-01

382

Speciation of metals in medicinal plants under different stress condition by HPLC-ICP-MS

No abstract prepared.

2005-05-01

383

Small Angle Neutron Scattering and Calorimetric Studies of Large Unilamellar Vesicles of the Phospholipid Dipalmitoylphosphatidylcholine

No abstract prepared.

2005-07-01

384

Slide Rule for Rapid Response Estimation of Radiological Dose from Criticality Accidents

No abstract prepared.

1999-03-01

385

Singlet-to-triplet ratio in the deuteron breakup reaction pd{yields}pnp at 585 MeV

No abstract prepared.

1999-06-03

386

Shortwave transport in the cloudy atmosphere by anomalous/levy diffusion: New diagnostics using Forte Data

No abstract prepared.

2002-03-01

387

Short-term radon concentration measurements in Dwellings in the metropolitan region of Belo Horizonte, Brazil

No abstract prepared.

2000-10-01

388

Search for magnetic rotation in {sup 202}Pb and {sup 203}Pb

No abstract prepared.

2010-07-01

389

Search for a quasi-bound {eta}-{sup 3}He state with the COSY-TOF spectrometer

No abstract prepared.

2000-07-24

390

STRUCTURAL CHARACTERIZATION OF THIN HYDROXYPROPYLCELLULOSE FILMS. X-RAY REFLECTIVITY STUDIES

No abstract prepared.

2002-03-01

391

SAXS studies of the injection molding effects on the nanostructure of polyesters. I. Polybutylene terephthalate (Pbt)

No abstract prepared.

2004-01-01

392

Reaction-diffusion effects on species mixing rates in turbulent premixed methane-air combustion

No abstract prepared.

2004-07-01

393

Radiative processes as a condensation phenomenon and the physical meaning of deformed canonical structures

No abstract prepared.

2009-06-01

394

Radiation processing used in forestry in Thailand

No abstract prepared.

2008-07-01

395

RESPONSE TO THE CHALLENGES OF TECHNOLOGICAL CHANGE ON A SAFEGUARDS EQUIPMENT SUPPORT ORGANIZATION: DESIGN OF A PERFORMANCE-BASED TRAINING PROGRAM.

A summary is presented of research being carried out in Thailand on the preparation of irradiation-impregnated wood.

1981-01-01

396

Quality Assurance in Safeguards: Indonesian Document Control and Records Management System

No abstract prepared.

2000-07-16

397

Pulsations in the compression chamber, a potential cause of damage?; Pulsationen im Verdichtungsraum - eine potentielle Schadensursache?

No abstract prepared.

2010-07-01

398

Properties of Polyacrylonitrile/Single Wall Carbon Nanotube Composite Films Prepared in Nitric Acid

No abstract prepared.

2005-05-01

399

Preparation, characterization and photocatalytic activity of the neodymium-doped TiO2 hollow spheres

Full Text Available

2005-06-01

400

Preparation of Porous Mullite Composites through Recycling of Coal Fly Ash

Not Available

2010-10-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

401

Preparation of Poly (acrylonitrile)/Poly (pyrrole) Composite and Its Mechanical Properties

Full Text Available

2010-03-01

402

Preparation of Activated Carbon Fiber-Ceramic Composites and Its Physical Properties

Full Text Available

1990-06-01

403

Preparation and Physicochemical Properties of Chitosan from Red Crab Waste-Shell

Full Text Available

1997-01-01

404

Phytochemical study of Tynanthus fasciculatus (Bignoniaceae); Estudo fitoquimico de Tynanthus fasciculatus (Bignoniaceae)

Full Text Available

2001-03-01

405

Phenomenological analysis of K{sup +}-meson production in proton-nucleus collisions

No abstract prepared.

2005-07-01

406

PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.

No abstract prepared.

2002-03-01

407

Optimized filtration enhances oil-injected compressors; Optimierte Filtration verbessert oeleingespritzte Kompressoren

No abstract prepared.

1999-09-30

408

Optimization of the spectator detector arrangement for the pn {yields} pn{eta}' measurements at COSY-11

No abstract prepared.

2009-09-14

409

Online monitoring of pollen - development of a novel technique and first results of field experiments

No abstract prepared.

2002-03-01

410

Occult brain metastases in HER2-positive breast cancer patients: Frequency and response to radiotherapy

No abstract prepared.

2005-07-01

411

Obtainment of lanthanum oxide by fractionated precipitation method

No abstract prepared.

2007-10-15

412

Obsidian under fire: considering the role of raw material variation in obsidian hydration analysis

... ammonium compounds benzilic acid chemical preparation lanthanum oxides

1979-01-01

413

Novel Tetracycline Resistance Determinant Isolated from an Environmental Strain of Serratia marcescens

No abstract prepared.

2000-07-01

414

Novel Antidrugabuse Peptide

No abstract prepared.

2007-01-01

415

International Science & Technology Center (ISTC)

Natural Biologically Active HLDF6 Peptide as Potential Preparation for Correction of Different Drugabuse Forms

416

Nitrogen accumulation in clays: solid-solution equilibrium and risk of gas generation

New paradigm : controlling initiation phase is necessary for optimization of wire-array z-pinch performance.

No abstract prepared.

2002-07-01

417

New applications for pumps without shaft seals; Neue Einsatzgebiete fuer wellendichtungslose Pumpen

No abstract prepared.

2008-08-01

418

NMR assignment of the cAMP-binding domain A of the PKA regulatory subunit

No abstract prepared.

2005-05-01

419

N=2 supersymmetric radiation damping in an external electromagnetic field, noncommutativity and duality

No abstract prepared.

2006-12-15

420

Multi Canister Overpack (MCO) Topical Report [SEC 1 and 2

No abstract prepared.

2008-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

421

Morphology and Properties of Polyacrylonitrile/Na-MMT Nanocomposites Prepared via in-situ Polymerization with Macroazoinitiator

No abstract prepared.

1999-12-16

422

Modernization concepts for older steam turbines. Economic advantages; Modernisierungskonzepte fuer aeltere Dampfturbinen. Wirtschaftliche Vorteile

Full Text Available

2006-06-01

423

Micro-Fabricated Thin-Film Fuel Cells for Portable Power Requirements

No abstract prepared.

2003-10-20

424

Measurement of W-Boson Helicity Fractions in Top-Quark Decays Using costheta*

No abstract prepared.

2002-03-21

425

Magnetic properties of single crystalline RE{sub 2}PdSi{sub 3} intermetallic compounds

No abstract prepared.

2008-11-01

426

MPIRSPT : a parallelized all-electron DFT program for lanthanide and actinide calculations.

No abstract prepared.

2005-07-01

427

METHOD FOR SYNTHESIZING DERIVATIVE, COMPOUND LIBRARY AND METHOD FOR PREPARING THE SAME AND METHOD FOR SCREENING

No abstract prepared.

2008-08-01

428

J-STORE (Japan)

Full Text Available

2006-04-28

429

Luminosity determination at COSY-11 using the proton-deuteron elastic scattering

Lipid Compositions Changes of Seasoned Pork Prepared with Medicinal Plant Extracts During Storage

No abstract prepared.

2002-03-01

430

LLNL inductrack progress report - February 99 through November 99

Full Text Available

2007-12-01

431

Iron in cookies prepared with fortified flour

No abstract prepared.

2000-03-08

432

Investigations and development of gaseous radiation detectors; Badania i rozwoj konstrukcji gazowych detektorow promieniowania

... Italy) Istituto Superiore di Sanita (Italy) 207 p. ENVIRONMENTAL SCIENCES

2009-04-01

433

Investigation of the pp {yields} nK{sup +}{sigma}{sup +} reaction

No abstract prepared

1998-12-31

434

Introduction of air pollution abatement measures in Germany; Einfuehrung von Klimaschutzmassnahmen in Deutschland

No abstract prepared.

2002-03-01

435

Induced deformation of the canonical structure and UV/IR duality in (1 + 1)D

No abstract prepared

1998-12-31

436

Individually adapted examination protocols for reduction of radiation exposure in chest CT

No abstract prepared.

2008-07-01

437

Identifying Contributing Degradation Phenomena in PEM Fuel Cell Membrane Electrode Assemblies Via Electron Microscopy

No abstract prepared.

2002-02-01

438

INTERRUPTED-GROWTH STUDIES OF THE SELF-ASSEMBLY OF INTRINSICALLY ACENTRIC SILOXANE-DERIVED MONOLAYERS

No abstract prepared.

2006-10-01

439

Histological analysis of hyaluronic acid and decorin in solid subcutaneous walker 256 rat carcinoma

No abstract prepared.

2003-01-01

440

High-resolution infrared spectroscopy of {gamma}-ray irradiated solid parahydrogen

No abstract prepared.

1998-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

441

High-Performance SPICE Development Including an Analytical Transient Photocurrent BJT Model

No abstract prepared.

2002-09-01

442

High resolution line shapes of weak autoionizing resonances identified through fluorescence from the satellite states of Ar+

No abstract prepared.

2000-08-01

443

HIGH ORDER STATISTICAL SIGNATURES FROM SOURCE-DRIVEN MEASUREMENTS OF SUBCRITICAL FISSILE SYSTEMS

No abstract prepared.

1997-07-01

444

Geothermal progress monitor. Special supplement: proceedings of the geothermal program review

No abstract prepared.

1998-04-01

445

Gas sensing properties of polyacrylonitrile/metal oxide nanofibrous mat prepared by electrospinning

Separate abstracts were prepared for individual papers. (MHR)

1982-01-01

446

GaAs/(ordered) GaInP2 Heterostructures under Pressure and HighMagnetic Fields

Full Text Available

2008-07-01

447

Fresh air for the whole industry; Frischer Wind auf breiter Front

No abstract prepared.

1998-09-01

448

Fixed constituents of Bauhinia acuruana Moric; Constituintes fixos de Bauhinia acuruana Moric

No abstract prepared.

2010-06-15

449

First-principles investigation of Co wires at Pt(111) step-edges

No abstract prepared.

2010-07-01

450

First results of {pi}{sup 0}-{eta} mixing angle measurement

No abstract prepared.

2006-07-01

451

FAST FLUX TEST FACILITY (FFTF) FINAL SAFETY ANALYSIS REPORT AMENDMENT 83

No abstract prepared.

2002-03-01

452

Extended sectors of utilization by an advanced engineering. Utilization of wind power; Erweiterte Einsatzgebiete durch moderne Technik. Windenergienutzung

No abstract prepared.

2003-11-20

453

Exploring changes in solar model physics to mitigate the solar abundance problem

No abstract prepared.

2010-07-01

454

Enhanced ion charge states in vacuum arc plasmas using a 'current spike' method

No abstract prepared.

2008-01-01

455

Enhanced and multiplexed detection via a novel RCA-aptamer based sensing system

No abstract prepared.

1999-07-01

456

Energy dependence of the pp {yields} ppK{sup +}K{sup -} total cross section close to threshold

No abstract prepared.

2006-09-06

457

Elemental content determination in leaves and extracts of Casearia medicinal plant by neutron activation analysis

No abstract prepared.

2002-03-01

458

Electric cars. A reality for Ireland. Partnership of the Irish Government, ESB and Renault-Nissan

No abstract prepared.

2005-07-01

459

Effects of season and body condition score on lipid metabolism and oxidative status of periparturient dairy cows

No abstract prepared.

2010-05-31

460

Effects of extracts of medicinal plants in the parasitaemia of Trypanosoma cruzi and in the biodistribution of the technetium-{sup 99m}

No abstract prepared.

2005-07-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

461

Effects of Coulomb and kaon nuclear potentials on soft K{sup +} production from nuclei

No abstract prepared.

2008-10-15

462

Effect of the medicinal plant Echinacea purpurea on the bioavailability of the radiopharmaceutical {sup 99M}TC-sodium pertechnetate

No abstract prepared.

2002-03-01

463

ESR spectroscopy of intermediate products of water radiolysis; Spektroskopia EPR produktow posrednich radiolizy wody

No abstract prepared.

2008-10-15

464

Domain Bridging Interactions. A Necessary Contribution to the Function and Structure of 'Escherichia coli' Aspartate Transcarbamoylase

No abstract prepared

1998-12-31

465

Discontinuous Galerkin Finite Element Method applied to the 1-D Spherical Neutron Transport Equation

No abstract prepared.

2001-01-01

466

Diagnostic Analysis of Silicon Photovoltaic Modules after 20--Year Field Exposure

No abstract prepared.

2005-11-07

467

Development of chemical separation in gas phase for heavy actinide and trans-actinide elements

No abstract prepared.

2000-09-25

468

Development of a dual serial-parallel multiphase CFD code for application to industrial combustor/reactor systems.

No abstract prepared

1998-01-01

469

Determination of metals in medicinal plants and soil from Amazon area by neutron activation analysis and ICP-MS

No abstract prepared.

2000-05-16

470

Decomposition of tar in pyrolysis gas by partial oxidation and thermal cracking. Part 2

No abstract prepared.

2005-07-01

471

Decay studies of rare-earth isotopes produced in the proton-induced fission

No abstract prepared

1998-12-31

472

DISCRETE SIMULATION OF REACTIVE AND NON-REACTIVE FLOW WITH LATTICE GAS AUTOMATA (LGA)

No abstract prepared

1998-01-01

473

Cryogenic heat pipe-target with aluminum condenser for the COSY-TOF experiment

No abstract prepared.

2000-01-01

474

Corrosion protection of onshore and offshore wind power systems; Korrosionsschutz von Windenergieanlagen Onshore and Offshore

No abstract prepared.

2002-03-01

475

Contribution to the radiation preparation of wood-plastic materials. Pt. 7

No abstract prepared.

2003-07-01

476

Contribution to the radiation preparation of wood-plastic materials. Pt. 6

... odd nuclei organic compounds radiation effects radioisotopes synthesis

1974-01-01

477

Contribution to the radiation preparation of wood-plastic materials Pt. 3

... compounds polymers polyolefins polyvinyls radiation effects SYNTHESIS.

1974-01-01

478

Construction of REpower 5M; Errichtung der REpower 5M

... compounds plants radiation effects radioisotopes reaction kinetics trees

1974-01-01

479

Conduct of Operations Applicability Matrix for CMELS Low Hazard Facilities at LLNL Site 200

No abstract prepared.

2004-07-01

480

Conduct of Operations Applicability Matrix for CMELS Light Science and Industry and General Industry Facilities at LLNL Site 200

No abstract prepared.

2008-04-22

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

481

Computational analysis of candidate intron regulatory elements for tissue-specific alternative pre-mRNA splicing

No abstract prepared.

2008-04-22

482

Commentary on: Molecular basis for discriminating between normaland damaged bases by the human alkyladenine glycosylase, AAG

No abstract prepared.

2001-04-01

483

Climate change adaptation in coastal zones: Improving decision-making to support management strategies

No abstract prepared.

2001-03-05

484

Chemical and biological aspects of an arabinogalactan from the medicinal herb Phyllanthus niruri (quebra-pedra)

No abstract prepared.

2009-02-01

485

Charge station for electric cars; Ladestation versorgt Elektroautos einheitlich mit Strom

No abstract prepared.

2005-07-01

486

Central flat ventilation - an unfinished technology; Zentrale Wohnungslueftung - eine unfertige Technologie?

No abstract prepared.

2010-10-04

487

Building LAMMPS data files with car/mdf files and the msi2lmp utility.

No abstract prepared.

2003-10-01

488

Biocontrol Agents of Crops Diseases

No abstract prepared.

2010-03-01

489

International Science & Technology Center (ISTC)

Scale up of Technology for Production and Application of Rhizobacteria-Based Preparations as Biocontrol Agents of Crop Diseases

490

BIOGEOCHEMISTRY IN THE GLOBAL PARALLEL OCEAN PROGRAM; CONNECTIONS WITH CLIMATE-RELEVANT TRACE GASES

Application of model-based method to measurement of radwaste from nuclear fuel processing

No abstract prepared.

2000-09-19

491

Antioxidant Characteristics and Preparation of Chocolate Added with Sochungryong-Tang (Oriental Medicinal Plants Extract)

No abstract prepared

1998-01-01

492

Akt interacts directly with Smad3 to regulate the sensitivity to TGF-beta-induced apoptosis

Full Text Available

2005-10-01

493

Admissible representations and characters of the affine superalgebras osp(1,2) and sl(2/1)

No abstract prepared.

2004-04-12

494

Adaptation to climate change in coastal zones: An analysis of the interventions to safeguard Venice and its lagoon

No abstract prepared.

1998-07-01

495

A numerical analysis of reaction-diffusion effects on species mixing rates in turbulent premixed methane-air combustion

No abstract prepared.

2009-02-01

496

3D Multispecies Nonlinear Perturbative Particle Simulations of Collective Instabilities in Intense Particle Beams

No abstract prepared.

2009-05-01

497

2004 Rock Deformation Gordon Conference - August 8-12, 2004

No abstract prepared.

2000-01-21

498

'Seaflow Energy from the sea; 'Seaflow' Energie aus dem Meer

No abstract prepared.

2004-08-08

499

'Blue sky upon the Lausitz'; 'Blauer Himmel ueber der Lausitz'

No abstract prepared.

2004-03-01

500