Can Connecting and Collaborating with Industry Professionals and Community Partners through a Project-Based Initiative Create a Meaningful Learning and Leadership Experience for College Students?

Science.gov (United States)

Jensen-Inman, Leslie Reese

2012-01-01

The author served as facilitator of a group of graphic design college students at The University of Tennessee at Chattanooga (UTC). These students embarked on a collaborative, 24-hour+, work-around-the-clock, creative blitz and used design thinking to serve the needs of Dalewood Middle School in Chattanooga. Students collaborated with industry…

Basal Ottawa Limestone, Chattanooga Shale, Floyd Shale, Porters Creek Clay, and Yazoo Clay in parts of Alabama, Mississippi and Tennessee as potential host rocks for underground emplacement of waste

International Nuclear Information System (INIS)

Mellen, F.F.

1976-01-01

Impermeable rock units, preferably at least 500 feet thick and lying 1000 to 3000 feet below land surface, were sought in the region consisting roughly of the western 3 / 5 ths of Tennessee and the northern 3 / 5 ths of Alabama and Mississippi. All rock sequences, Cambrian through Eocene, were examined in varying detail, except the Cretaceous Selma Chalk and except the diapiric salt. These rocks were studied for their relative impermeable homogeneity, their continuity, their background of structural and seismic stability and their hydrologic associations. The Central Mississippi Ridge of north-central Mississippi is overlain by a long-stable mass of Porters Creek Clay 500-700 feet thick, in an area roughly 50-60 miles wide and about 150 miles long. The Yazoo Clay, where best developed in the west-central and southwest part of Mississippi, is in the 400-500 foot thickness range, but locally exceeds 500 feet. The entire area mapped is underlain by the Louann Salt which has produced many deep-seated salt domes and numerous piercement salt domes. Salt flow has complicated shallow structural geology throughout that area. The Chattanooga Shale rarely exceeds 60 feet in thickness in the region studied and is generally much thinner and is absent in many places. In the lower part of the Middle Ordovician (Ottawa Megagroup), the Murphreesboro and associated dense limestones appear to offer a potential disposal unit 250-400 feet thick, having the advantages of rock competency and freedom from association with prolific aquifers in the overburden or beneath. Other less conspicuous stratigraphic units are reviewed

CRADA Final Report for CRADA Number ORNL98-0521 : Development of an Electric Bus Inverter Based on ORNL Auxiliary Resonant Tank (ART) Soft-Switching Technology; TOPICAL

International Nuclear Information System (INIS)

Ayers, C.W.

2001-01-01

The Power Electronics and Electric Machinery Research Center (PEEMRC) of Oak Ridge National Laboratory (ORNL) has for many years been developing technologies for power converters for motor drives and many other applications. Some of the research goals are to improve efficiency and reduce audible and electromagnetic interference noise generation for inverters and the driven loads. The converters are being required to produce more power with reduced weight and volume, which requires improvements in heat removal from the electronics, as well as improved circuit designs that have fewer electrical losses. PEEMRC has recently developed and patented a soft-switching inverter topology called an Auxiliary Resonant Tank (ART), and this design has been tested and proven at ORNL using a 10-kW laboratory prototype. The objective of this project was to develop, test, and install the ART inverter technology in an electric transit bus with the final goal of evaluating performance of the ORNL inverter under field conditions in a vehicle. A scaled-up inverter with the capacity to drive a 22-e bus was built based on the 10-kW ORNL laboratory prototype ART soft-switching inverter. Most (if not all) commercially available inverters for traction drive and other applications use hard-switching inverters. A Cooperative Research and Development Agreement was established with the Chattanooga Area Regional Transit Authority (CARTA), the Electric Transit Vehicle Institute (ETVI), and Advanced Vehicle Systems (AVS), all of Chattanooga, along with ORNL. CARTA, which maintains and operates the public transit system in Chattanooga, provided an area for testing the vehicle alongside other similar vehicles in the normal operating environment. ETVI offers capabilities in standardized testing and reporting and also provides exposure in the electric transit vehicle arena for ORNL's technologies. The third Chattanooga partner, (AVS) manufactures all-electric and hybrid electric transit buses using

Experience from the Inspection of Licensees' Outage Activities, Including Fire Protection Programmes, Event Response Inspections, and the Impact of the Fukushima Daiichi NPP Accident on Inspection Programmes. Workshop Proceedings, Chattanooga, Tennessee, United States, 7-10 April 2014 - Appendix: Compilation of Survey Responses

International Nuclear Information System (INIS)

2014-10-01

This appendix provides the complete compilation of responses received to the questionnaire issued in conjunction with the workshop announcements. The responses are provided as received, with changes made only to the formatting. The OECD Nuclear Energy Agency (NEA) Committee on Nuclear Regulatory Activities (CNRA) Working Group on Inspection Practices (WGIP) sponsored the 12. International Workshop on Nuclear Regulatory Inspection Activities. The workshop was hosted by the U.S. NRC, in Chattanooga, Tennessee, United States of America on 7 -10 April 2014. The three workshop topics that were addressed were as follows: - Inspection of Outage Activities Including Fire Protection Programmes. - Event Response Inspections. - The Impact of Inspection Programmes of the Fukushima Daiichi NPP Accident. Each of the respondents was given the following instructions in relation to their response: - Only one response per country is required. If more than one person from your country is participating, please co-ordinate the responses accordingly. - Please provide responses on separate sheet and clearly identify the questionnaire part and topic. For preparation of the workshop, participants are invited to supply their national inspection approaches used in inspection of events and incidents according to the surveys. Actual issues that were discussed during the workshop were generated by the topic leaders based on the responses submitted by participants with their registration forms. This formats helps to ensure that issues considered most important by the workshop participants are covered during the group discussions. (authors)

Wayside charging and hydrogen hybrid bus : extending the range of electric shuttle buses.

Science.gov (United States)

2012-09-30

This report documents the results completed by the Center for Energy, Transportation and the Environment (CETE) at the University of Tennessee at Chattanooga (UTC) under Federal Transit Administration Cooperative Agreement TN-26-7034. This research h...

78 FR 692 - Notice of Petitions by Firms for Determination of Eligibility To Apply for Trade Adjustment...

Science.gov (United States)

2013-01-04

..., injection 59715. moldings, and tooling. Firm provides services for design, lean manufacturing consulting... Chattanooga, TN 37405. ceramics for the electronics industry; primary manufacturing material is alumina. South..., AL frozen and fresh catfish 35406. products; primary manufacturing material is catfish. West Central...

Using Educational Resources To Assist Small Business Growth.

Science.gov (United States)

Walker, Grayson H.; And Others

1996-01-01

Recognizing the needs of women as entrepreneurs, the University of Tennessee at Chattanooga created an outreach program, the Institute for Women as Entrepreneurs. Using talents of business students, faculty, and volunteer consultants, the institute has assisted 150 women. Strategic considerations of the outreach approach and possible applications…

76 FR 20434 - Notice of Sunshine Act Meeting

Science.gov (United States)

2011-04-12

..., 1101 Market Street, Chattanooga, Tennessee, to consider the matters listed below. The public may.... Nuclear Safety Review. Old Business Approval of minutes of February 18, 2011, Board Meeting. New Business... Relations Committee. 8. Report of the People and Performance Committee. 9. Report of the Finance, Rates, and...

18 CFR 1301.2 - Public reading rooms.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Public reading rooms. 1301.2 Section 1301.2 Conservation of Power and Water Resources TENNESSEE VALLEY AUTHORITY PROCEDURES... 400 W. Summit Hill Drive, Knoxville, Tennessee 37902-1499, and 1101 Market Street, Chattanooga...

Utilization of Skills in the Care of Patients with Deviations in Psychosocial Adaptation (NS 207): Competency-Based Course Syllabus.

Science.gov (United States)

Wells, Tanya G.

"Utilization of Skills in the Care of Patients with Deviations in Psychosocial Adaptation" (NS 207) is an associate degree nursing course offered at Chattanooga State Technical Community College. The course stresses the individual as a system in his/her psychosocial adaptation to internal and external stressors, and highlights the…

78 FR 12365 - Tennessee Valley Authority; Notice of Receipt and Availability of Application for Renewal of...

Science.gov (United States)

2013-02-22

... 20852, or through the internet from the NRC's Agencywide Documents Access and Management System (ADAMS... Room is accessible from the NRC Web site at http://www.nrc.gov/reading-rm/adams.html . In addition, the... also be available to local residents near the site at the Chattanooga-Hamilton County Library...

Microbial community structure and biodegradation activity of particle-associated bacteria in a coal tar contaminated creek

Energy Technology Data Exchange (ETDEWEB)

Jennifer M. DeBruyn; Gary S. Sayler [University of Tennessee, Knoxville, TN (United States). Center for Environmental Biotechnology and Department of Microbiology

2009-05-01

The Chattanooga Creek Superfund site (Chattanooga, TN) is one of the most polluted waterways in the southeastern U.S. with high polycyclic aromatic hydrocarbon (PAH) concentrations in the sediments. PAHs associate with suspended solids in the water column, and may be redeposited onto the floodplain. These suspended particles represent an interesting but understudied environment for PAH-degrading microbial communities. This study tested the hypotheses that particle-associated bacterial (PAB) communities have genotypic potential (PAH-dioxygenase genes) and activity (naphthalene and pyrene mineralization), and can contribute to natural attenuation of PAHs in Chattanooga Creek. Upstream of the Superfund site, mineralization ranged from 0.2 to 2.0% of added {sup 14}C-naphthalene and 0 to 0.1% {sup 14}C-pyrene (after 40 h), with first order biodegradation rate constants (k{sub 1}) ranging from 1.09 to 9.18 x 10{sup -5} h{sup -1} and 0 to 1.13 x 10{sup -6} h{sup -1}, respectively. Mineralization was significantly greater in PAB communities within the contaminated zone, with 11.8 to 31.2% {sup 14}C-naphthalene (k{sup 1} 5.34 to 14.2 x 10-4 h{sup -1}) and 1.3 to 6.6% {sup 14}C-pyrene mineralized (k{sub 1} 2.89 to 15.0 x 10{sup -5} h{sup -1}). Abundances of nagAc (naphthalene dioxygenase) and nidA (pyrene dioxygenase) genes indicated that PAB communities harbored populations with genetic potential for both low- and high-molecular weight PAH degradation, and quantification of Mycobacterium 16S rDNA genes indicated that PAH-degrading mycobacteria are also prevalent in this environment. Phylogenetic comparisons (T-RFLPs) between PAB and sediments indicated these microbial communities were taxonomically distinct, but shared some functional similarities, namely PAH catabolic genotypes, mineralization capabilities, and community structuring along a contamination gradient. 38 refs., 4 figs., 2 tabs.

77 FR 43860 - Notice of Lodging of a Consent Decree Pursuant to the Clean Water Act

Science.gov (United States)

2012-07-26

..., Chattanooga has agreed to perform a stream restoration supplemental environmental project at a cost of [email protected] or mailed to P.O. Box 7611, U.S. Department of Justice, Washington, DC 20044-7611 and... Decree Library, P.O. Box 7611, U.S. Department of Justice, Washington, DC 20044-7611, or by faxing or...

Marketing Plan, 1980-81.

Science.gov (United States)

Hoppe, Sherry; Biggers, Paul

A marketing program for Chattanooga State Technical Community College (CSTCC) is presented as a guide to be used by the college in increasing its share of the traditional college-age market and in expanding the college's target audience to include more non-traditional students. The report first presents a review of the literature concerning…

Well-construction, water-level, geophysical, and water-quality data for ground-water monitoring wells for Arnold Air Force Base, Tennessee

Science.gov (United States)

Hough, C.J.; Mahoney, E.N.; Robinson, J.A.

1992-01-01

Sixty-five wells were installed at 39 sites in the Arnold Air Force Base area in Coffee and Franklin Counties, Tennessee. The wells were installed to provide information on subsurface lithology, aquifer characteristics, ground-water levels, and ground-water quality. Well depths ranged from 11 to 384 feet. Water-quality samples were collected from 60 wells and analyzed for common inorganic ions, trace metals, and volatile organic compounds. The median dissolved-solids concentrations were 60 milligrams per liter in the shallow aquifer, 48 million gallons per liter in the Manchester aquifer, 1,235 milligrams per liter in the Fort Payne aquifer, and 1,712 milligrams per liter in the upper Central Basin aquifer. Caliper, temperature, natural gamma, electric, neutron porosity, gamma-gamma density, and acoustic velocity borehole-geophysical logs were obtained for the six deep wells completed below the Chattanooga Shale. Petrographic and modal analysis were performed on rock samples from each deep well. These six deep wells provide the first information in the study area on hydraulic head and water quality from below the Chattanooga Shale.

Diagnostic and treatment challenges in traumatic brain injury patients with severe neuropsychiatric symptoms: insights into psychiatric practice

Directory of Open Access Journals (Sweden)

Lauterbach MD

2015-07-01

Full Text Available Margo D Lauterbach,1 Paula L Notarangelo,1 Stephen J Nichols,2 Kristy S Lane,1 Vassilis E Koliatsos11The Neuropsychiatry Program at Sheppard Pratt, Sheppard Pratt Health System, Baltimore, MD, 2Department of Emergency Medicine, The University of Tennessee College of Medicine Chattanooga, Chattanooga, TN, USAAbstract: Traumatic brain injury (TBI causes a variety of neuropsychiatric problems that pose diagnostic and treatment challenges for providers. In this report, we share our experience as a referral neuropsychiatry program to assist the general psychiatrist when adult TBI patients with psychiatric symptoms present for evaluation and treatment. We completed a retrospective study of patients with moderate-to-severe TBI and severe neuropsychiatric impairments. We collected information on demographics, nature of injury, symptomatology, diagnoses, and treatments. Data analysis indicates that mood stabilization was a key concern, often requiring aggressive pharmacological management. Cognitive dysfunction was a problem for the majority of patients, but was only medicated in a third, due to poor efficacy or behavioral side effects. The co-occurrence of multiple TBI-related symptoms and diagnoses in this patient cohort emphasizes the need for individualized psychopharmacological approaches and interventions.Keywords: traumatic brain injury, neurobehavioral, treatment

Germanium and uranium in coalified wood from upper Devonian black shale

Energy Technology Data Exchange (ETDEWEB)

Breger, I A; Schopf, J M

1955-02-01

Spectrographic analyses were performed on carbonaceous material and shale samples from the Chattanooga shale in Tennessee and the Cleveland member of the Ohio shale in Ohio with particular emphasis on U and Ge. Semiquantitative analyses for 29 elements (Fe, Si, Ge, Al, Ca, V, Ni, U, Mg, Cu, Ti, Cr, Mo, Na, Sr, B, Y, Pb, Ba, Co, Sn, Zr, Mn, Zn, Yb, Ga, Sc, Be) were performed on both ash specimens and whole sample. The analyses showed unusually high percentages of Ge (1 to 5%) U (0.1 to 1%), V (1 to 5%), and Ni (0.1 to 1%) in the ash of coal from the Chattanooga and Ohio shales. Quantitative chemical analysis for U, Ge, V, and Ni in the whole coal and ash were done to check the results of the semiquantitative analyses. Ash content from the proximate analyses indicated that the coal samples tested were similar to vitrain in ash percentage. Because of the unusually high percentages of U and Ge and the low ash of the coals tested, the author felt that the U and Ge might be associated wire also observed with lower radiation doses (200 and 400 rad).

Directory of Organizational Technical Report Acronym Codes (DOTRAC)

Science.gov (United States)

1994-07-01

INFORMATION CENTRE 421054 BEIJING CNIE COMISION NACIONAL DE INVESTIGACIONES 400486 ESPACIALES BUENOS TRES (ARGENTINA) CNO OFFICE OF THE CHIEF OF NAVAL...398814 LAES LANDING AIDS EXPERIMENT STATION 203500 ARCATA CA LAFE LABORATORIO DE FISICA ESPACIAL 403052 SAO dOSE DOS CAMPOS (BRAZIL) I - 146 SOURCE...CUMBUSTION ENGINEERING INC CENC 089550 CHATTANOOGA TN COMIS!ON NACIONAL DE INVESTIGACIONES CNIE 400486 ESPACIALES BUENOS AIRES (ARGENTINA) COMISSAD

Spinning Your Own Story - Marketing the Geosciences to the Public

Science.gov (United States)

Sturm, D.; Jones, T. S.

2006-12-01

Studies of high achieving African-American and Hispanic students have shown the students do not go into STEM (Science, Technology, Engineering and Math) disciplines due to the poor teaching by some STEM teachers, lack of encouragement from teachers or parents and a self perception the students will not be successful. One underlying component to this problem is the issue of perception of the STEM disciplines by the general public. This study focuses on changing the often negative or neutral perception into one more positive and diverse. This study utilizes clear, and hopefully effective, media communication through the use of traditional marketing strategies to promote the geosciences and the geology program at the University of Tennessee at Chattanooga to the general public in the Chattanooga metropolitan area. Average citizens are generally unaware of the various geoscience divisions and career opportunities available. Pioneer marketing, used in this study, introduces new ideas and concepts to the general public, but does not ask for direct action to be taken. The primary goal is to increase awareness of the geosciences. The use of printed and online media delivers the message to the public. In the media, personal interviews with geoscientists from all races and backgrounds were included to demonstrate diversity. An invitation was made to all high school students to participate in an associated after-school program. Elements developed for this program include: 1) clearly defining goals for the marketing effort; 2) delineating the target market by age, education, race and gender; 3) developing a story to tell in the marketing effort; and 4) producing products to achieve the marketing goals. For this effort, the product results included: an annual newspaper tabloid, an associated website and a departmental brochure. The marketing results show increased public awareness, increased awareness of the geology program within the University of Tennessee at Chattanooga

Solar-Assisted Electric Vehicle Charging Station Interim Report

Energy Technology Data Exchange (ETDEWEB)

Lapsa, Melissa Voss [ORNL; Durfee, Norman [ORNL; Maxey, L Curt [ORNL; Overbey, Randall M [ORNL

2011-09-01

Oak Ridge National Laboratory (ORNL) has been awarded $6.8 million in the Department of Energy (DOE) American Recovery and Reinvestment Act (ARRA) funds as part of an overall $114.8 million ECOtality grant with matching funds from regional partners to install 125 solar-assisted Electric Vehicle (EV) charging stations across Knoxville, Nashville, Chattanooga, and Memphis. Significant progress has been made toward completing the scope with the installation of 25 solar-assisted charging stations at ORNL; six stations at Electric Power Research Institute (EPRI); and 27 stations at Nissan's Smyrna and Franklin sites, with three more stations under construction at Nissan's new lithium-ion battery plant. Additionally, the procurement process for contracting the installation of 34 stations at Knoxville, the University of Tennessee Knoxville (UTK), and Nashville sites is underway with completion of installation scheduled for early 2012. Progress is also being made on finalizing sites and beginning installations of 30 stations in Nashville, Chattanooga, and Memphis by EPRI and Tennessee Valley Authority (TVA). The solar-assisted EV charging station project has made great strides in fiscal year 2011. A total of 58 solar-assisted EV parking spaces have been commissioned in East and Middle Tennessee, and progress on installing the remaining 67 spaces is well underway. The contract for the 34 stations planned for Knoxville, UTK, and Nashville should be underway in October with completion scheduled for the end of March 2012; the remaining three Nissan stations are under construction and scheduled to be complete in November; and the EPRI/TVA stations for Chattanooga, Vanderbilt, and Memphis are underway and should be complete by the end of March 2012. As additional Nissan LEAFs are being delivered, usage of the charging stations has increased substantially. The project is on course to complete all 125 solar-assisted EV charging stations in time to collect meaningful data

Very-low-frequency and low-frequency electric and magnetic fields associated with electric shuttle bus wireless charging

International Nuclear Information System (INIS)

Tell, R. A.; Kavet, R.; Bailey, J. R.; Halliwell, J.

2014-01-01

Tests conducted to date at the University of Tennessee at Chattanooga (UTC) indicate that wireless charging of the Chattanooga Area Regional Transportation Authority's (CARTA) downtown shuttle bus, currently operating with off-board battery charging technology, offers significant improvements in performance and cost. The system operates at a frequency of 20 kHz and a peak power of 60 kW. Because the system's wireless charging is expected to occur during a nominal 3-min charging period with passengers on-board, the magnetic and electric fields associated with charging were characterised at UTC's Advanced Vehicle Test Facility and compared with established human exposure limits. The two most prominent exposure limits are those published by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the Institute for Electrical and Electronic Engineers (IEEE). Both organisations include limits for groups who are trained (workers in specific industries) to be aware of electromagnetic environments and their potential hazards, as well as a lower set of limits for the general public, who are assumed to lack such awareness. None of the magnetic or electric fields measured either within or outside the bus during charging exceeded either the ICNIRP or the IEEE exposure limits for the general public. (authors)

Aquatic Field Survey at Volunteer Army Ammunition Plant, Chattanooga, Tennessee

Science.gov (United States)

1977-06-24

cryptocephala v. venta 137 2.3 Other species 883 15.3 Total 5,775 99-9* U-2 Achnanthes minutissima 22,871 85.4 Fragilaria capucina 1,398 5.2 1...delicatissima 550 2.7 Fragilaria capucina 527 2.6 Anomoeoneis vitrea 435 2.1 Navicula cryptocephala v. venta 205 1.0 Other species 1,168 5.8 Total

Analysis of Electric Power Board of Chattanooga Smart Grid Investment

Energy Technology Data Exchange (ETDEWEB)

Starke, Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ollis, Ben [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Glass, Jim [EPB Electric Power, Chattanooga, TN (United States); Melin, Alex [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Liu, Guodong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sharma, Isha [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-06-01

The deployment of a Smart Grid within the EPB electrical system has brought significant value to EPB customers and to EPB operations. The Smart Grid implementation has permitted the capability to automate many of the existing systems, increasing the overall efficiency and decreasing round trip time for many required operation functions. This has both reduced the cost of operations and increased the reliability of customer service. This boost in performance can be primarily linked to two main components: the communication network and the availability of data. The existence of a fiber communication backbone has opened numerous opportunities for EPB. Large data sets from remote devices can be continuously polled and used to compute numerous metrics. The speed of communication has provided a pathway to sophisticated distribution automation that would not otherwise be possible. The data have been shown to provide a much broader view of the actual electrical system that was not previously available, opening many new opportunities in data analytics. This report documents many of the existing systems and operational features of the EPB system. Many of these systems have seen significant improvement with the deployment of Smart Grid technologies. The research behind this report found that in some cases, the value was directly computable or estimable for these enhancements. Currently, several ongoing research topics are under investigation within EPB. Through a grant from TVA, EPB is currently installing a 1.3MW solar photovoltaic system, which will be the first-generation asset owned by EPB.

Perspectives on reactor safety

Energy Technology Data Exchange (ETDEWEB)

Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States)

1994-03-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

Perspectives on reactor safety

International Nuclear Information System (INIS)

Haskin, F.E.

1994-03-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course

An exploratory study of voice change associated with healthy speakers after transcutaneous electrical stimulation to laryngeal muscles.

Science.gov (United States)

Fowler, Linda P; Gorham-Rowan, Mary; Hapner, Edie R

2011-01-01

The purpose of this study was to determine if measurable changes in fundamental frequency (F(0)) and relative sound level (RSL) occurred in healthy speakers after transcutaneous electrical stimulation (TES) as applied via VitalStim (Chattanooga Group, Chattanooga, TN). A prospective, repeated-measures design. Ten healthy female and 10 healthy male speakers, 20-53 years of age, participated in the study. All participants were nonsmokers and reported negative history for voice disorders. Participants received 1 hour of TES while engaged in eating, drinking, and conversation to simulate a typical dysphagia therapy protocol. Voice recordings were obtained before and immediately after TES. The voice samples consisted of a sustained vowel task and reading of the Rainbow Passage. Measurements of F(0) and RSL were obtained using TF32 (Milenkovic, 2005, University of Wisconsin). The participants also reported any sensations 5 minutes and 24 hours after TES. Measurable changes in F(0) and RSL were found for both tasks but were variable in direction and magnitude. These changes were not statistically significant. Subjective comments ranged from reports of a vocal warm-up feeling to delayed onset muscle soreness. These findings demonstrate that application of TES produces measurable changes in F(0) and RSL. However, the direction and magnitude of these changes are highly variable. Further research is needed to determine factors that may affect the extent to which TES contributes to significant changes in voice. Copyright © 2011 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Education of the rural surgeon: experience from Tennessee.

Science.gov (United States)

Giles, W Heath; Arnold, Joshua D; Layman, Thomas S; Sumida, Michael P; Brown, Preston W; Burns, R Phillip; Cofer, Joseph B

2009-12-01

The rural surgery rotation that is contained within the general surgery residency program at The University of Tennessee College of Medicine-Chattanooga is described in this article. The advantages of this experience, including the extensive endoscopy experience and the close exposure to practicing general surgeons, are also outlined. The rotation receives uniformly positive evaluations from residents at completion, and it has become the primary gastrointestinal endoscopy educational experience in this program. The description serves as a model that can be used by other programs to construct a rural surgery rotation.

Perspectives on reactor safety. Revision 1

International Nuclear Information System (INIS)

Haskin, F.E.; Hodge, S.A.

1997-11-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor safety concepts. The course consists of five modules: (1) the development of safety concepts; (2) severe accident perspectives; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course

TRAC-B thermal-hydraulic analysis of the Black Fox boiling water reactor

International Nuclear Information System (INIS)

Martin, R.P.

1993-05-01

Thermal-hydraulic analyses of six hypothetical accident scenarios for the General Electric Black Fox Nuclear Project boiling water reactor were performed using the TRAC-BF1 computer code. This work is sponsored by the US Nuclear Regulatory Commission and is being done in conjunction with future analysis work at the US Nuclear Regulatory Commission Technical Training Center in Chattanooga, Tennessee. These accident scenarios were chosen to assess and benchmark the thermal-hydraulic capabilities of the Black Fox Nuclear Project simulator at the Technical Training Center to model abnormal transient conditions

Perspectives on reactor safety. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A. [Oak Ridge National Lab., TN (United States). Engineering Technology Div.

1997-11-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor safety concepts. The course consists of five modules: (1) the development of safety concepts; (2) severe accident perspectives; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

The design and use of proficiency based BWR reactor maintenance and refuelling training mockups

International Nuclear Information System (INIS)

Ford, G.J.

1996-01-01

The purpose of this paper is to describe the ABB experience with the design and use of boiling water reactor training facilities. The training programs were developed and implemented in cooperation with the nuclear utilities. ABB operates two facilities, the ABB ATOM Light Water Reactor Service Center located in Vasteras, Sweden, and the ABB Combustion Engineering Nuclear Operations BWR Training Center located in Chattanooga, Tennessee, USA. The focus of the training centers are reactor maintenance and refueling activities plus the capability to develop and qualify tools, procedures and repair techniques

Proceedings of the international workshop on conduct of inspections and inspector qualification and training

International Nuclear Information System (INIS)

Grimes, B.K.

1993-02-01

In the Fall of 1991, the OECD Committee on Nuclear Regulatory Activities (CNRA) approved the proposal of the Working Group (WGIP) on Inspection Practices to hold a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the USNRC in Chattanooga, Tennessee. The workshop was held from August 29 to September 4, 1992. The workshop was preceded by an orientation briefing for facilitators and a get-acquainted reception for participants. The workshop began with a plenary introductory session and ended with a plenary conclusion and evaluation session. Individual discussion sessions have been cataloged separately

Enhanced core monitoring system for Browns Ferry Nuclear Plant

International Nuclear Information System (INIS)

Lindsey, R.S.

1980-01-01

A system of computer hardware and software is being developed to supplement the process computers at Browns Ferry Nuclear Plant in the area of reactor core monitoring. All data stored in the process computers will be made available through a data link to an onsite minicomputer which will store and edit the data for engineering and operations personnel. Important core parameters will be effectively displayed on color graphic CRT terminals using techniques such as blinking, shading, and color coding to emphasize significant values. This data will also be made available to Tennessee Valley Authority's Chattanooga central office support groups through a data network between existing computers

Microstructural and mineralogical characterization of selected shales in support of nuclear waste repository studies

International Nuclear Information System (INIS)

Lee, S.Y.; Hyder, L.K.; Alley, P.D.

1988-01-01

Five shales were examined as part of the Sedimentary Rock Program evaluation of this medium as a potential host for a US civilian nuclear waste repository. The units selected for characterization were the Chattanooga Shale from Fentress County, Tennessee; the Pierre Shale from Gregory County, South Dakota; the Green River Formation from Garfield County, Colorado; and the Nolichucky Shale and Pumpkin Valley Shale from Roane County, Tennessee. The micromorphology and structure of the shales were examined by petrographic, scanning electron, and high-resolution transmission electron microscopy. Chemical and mineralogical compositions were studied through the use of energy-dispersive x-ray, neutron activation, atomic absorption, thermal, and x-ray diffraction analysis techniques. 18 refs., 12 figs., 2 tabs

Aerial gamma ray and magnetic survey, Huntington quadrangle: Ohio, West Virginia and Kentucky. Final report

International Nuclear Information System (INIS)

1981-04-01

The Huntington quadrangle of Kentucky, Ohio, and West Virginia covers 7250 square miles of the easternmost Midwestern Physiographic Province. Paleozoic exposures dominate the surface. These Paleozoics deepen toward the east from approximately 500 feet to a maximum depth of 8000 feet. Precambrian basement is thought to underlie the entire area. No known uranium deposits exist in the area. One hundred anomalies were found using the standard statistical analysis. Some high uranium concentration anomalies that may overlie the stratigraphic equivalent of the Devonian-Mississippian New Albany or Chattanooga Shales may represent significant levels of naturally occurring uranium. Future studies should concentrate on this unit. Magnetic data are largely in concurrence with existing structural interpretations but suggest some complexities in the underlying Precambrian

77 FR 6467 - Approval and Promulgation of Implementation Plans; Alabama, Georgia, and Tennessee: Chattanooga...

Science.gov (United States)

2012-02-08

... be CBI or otherwise protected. The www.regulations.gov Web site is an ``anonymous access'' system...; Particulate Matter 2002 Base Year Emissions Inventory AGENCY: Environmental Protection Agency (EPA). ACTION... 2.5 ) 2002 base year emissions inventory portion of the State Implementation Plan (SIP) revisions...

Coca-Cola, caffeine, and mental deficiency: Harry Hollingworth and the Chattanooga trial of 1911.

Science.gov (United States)

Benjamin, L T; Rogers, A M; Rosenbaum, A

1991-01-01

Harry Hollingworth's 1911 investigation of the behavioral effects of caffeine is one of the earliest examples of psychological research contracted by a large corporation. The research was necessitated by a federal government suit against the Coca-Cola Company for marketing a beverage with a deleterious ingredient, namely, caffeine. Although Hollingworth's research played little role in the outcome of the Coca-Cola trials, it was important as a model of sophistication in experimental design. As such, it set a standard for psychopharmacological research. It also was particularly important in directing Hollingworth toward a life-long career in applied psychology.

78 FR 28190 - Foreign-Trade Zone (FTZ) 134-Chattanooga, Tennessee; Notification of Proposed Production Activity...

Science.gov (United States)

2013-05-14

... to hydraulic excavators; bulldozers; wheel loaders; dump trucks; forklifts; forestry harvesters...; springs; supports; clamps; pipes; brackets; engines; engine blocks; engine plugs; engine cylinders; motors...

Comparison between dispersed nuclear power plants and a nuclear energy center at a hypothetical site on Kentucky Lake, Tennessee. Volume II. Transmission of power

International Nuclear Information System (INIS)

Reister, D.B.; Zelby, L.W.

1976-05-01

A comparison is made among power transmission systems required to serve a single set of load center demands from four modes of siting the generating facilities: a single generation site with an ultimate generation capacity of 48,000 MW; four generation sites each with a generation capacity of 12,000 MW; 10 generation sites each with a generation capacity of 4,800 MW; and a system that resulted when the existing utility plan for future generation was logically expanded. The time period for the study is from the year 1985 to the year 2020, when the full 48,000 MW of new capacity from the single large nuclear energy center is on-line. The load centers served are Huntsville, Alabama; Evansville, Indiana; Paducah, Kentucky; and Chattanooga, Nashville, and Memphis, Tennessee. Generation sites are real locations but are hypothetical in terms of miles of transmission lines, the product of the amount of power transmitted and the distance transmitted (GW-miles), and cost

Demonstration of an automated on-line surveillance system at a commercial nuclear power plant

International Nuclear Information System (INIS)

Smith, C.M.; Sweeney, F.J.

1983-01-01

As a first step in demonstrating the practicality of performing continuous on-line surveillance of the performance of nuclear steam supply systems using noise related techniques, Oak Ridge National Laboratory is operating a computerized noise signal data acquisition and processing system at the Sequoyah Unit 1 Nuclear Plant, an 1148 MWe four-loop Westinghouse pressurized water reactor (PWR) located near Chattanooga, Tennessee. The principal objective is to establish, with a degree of continuity and completeness not previously achieved, the long-term characteristics of signals from neutron detectors and process sensors in order to evaluate the feasibility of detecting and diagnosing anomalous reactor conditions by means of changes in these signals. The system is designed to automatically screen the gathered data, using a number of descriptors derived from the power spectra of the monitored signals, and thereby select for the noise analyst's perusal only those data which differ statistically from norms which the system has previously established

Radon and radon progeny in 70 houses in the Tennessee Valley area: study design and measurement methods

International Nuclear Information System (INIS)

Dudney, C.S.; Hawthorne, A.R.; Monar, K.P.; Quillen, J.L.; Clark, C. Jr.; Doane, R.W.; Wallace, R.G.; Reed, R.P.

1986-01-01

Levels of radon and its short-lived airborne progeny are being measured in a year-long study of 70 houses in four states in the Tennessee Valley. Various methods were used to solicit volunteers with differing degrees of success. Criteria for selection of houses in the study included presence of a lower level with cement floor and one or more block walls in contact with the soil, absence of obvious indications of technologically enhanced sources of radium, and proximity to one of four cities (Knoxville, Chattanooga, Birmingham, or Florence). By design, most houses in the study are in the same neighborhood as at least one other house in the study. Houses range in age from newly constructed to about 40 years old. Most of the houses have more than 2000 square feet of finished floor space. The lower level encompasses a garage in most cases. More complete information pertaining to house characteristics will be gathered in the course of the study. 19 refs., 1 fig

TVA nuclear power: Management of the nuclear program through personal services contracts

International Nuclear Information System (INIS)

1987-01-01

Mr. Steven White, a retired admiral, is serving as manager of the TVA Office of Nuclear Power. GAO previously concluded that Mr. White's retention under contractual arrangements constituted the improper use of a personal services contract and represented a circumvention of the statutory ceiling on salary payments to TVA employees. This report finds that Mr. White's rate of pay is within the range of the salaries paid by a sample of nonfederal utilities to their top executives and is over two and a half times the average salary paid to executives who hold positions which appear to have responsibility for managing the utilities' power or nuclear power operations. GAO also found that (1) TVA's Office of Nuclear Power has employed an additional 25 persons since 1986 under arrangements similar to the employing arrangements of Mr. White and (2) TVA's Nuclear Safety Review staff no longer reports directly to the TVA Board of Directors and General Manager. It has relocated from Knoxville, Tennessee to Chattanooga, Tennessee

Atmospheric Dispersion at Spatial Resolutions Below Mesoscale for university of Tennessee SimCenter at Chattanooga: Final Report

Energy Technology Data Exchange (ETDEWEB)

Dr. David Whitfield; Dr. Daniel Hyams

2009-09-14

In Year 1 of this project, items 1.1 and 1.2 were addressed, as well as item 2.2. The baseline parallel computational simulation tool has been refined significantly over the timeline of this project for the purpose of atmospheric dispersion and transport problems; some of these refinements are documented in Chapter 3. The addition of a concentration transport capability (item 1.2) was completed, along with validation and usage in a highly complex urban environment. Multigrid capability (item 2.2) was a primary focus of Year 1 as well, regardless of the fact that it was scheduled for Year 2. It was determined by the authors that due to the very large nature of the meshes required for atmospheric simulations at mesoscale, multigrid was a key enabling technology for the rest of the project to be successful. Therefore, it was addressed early according to the schedule laid out in the original proposal. The technology behind the multigrid capability is discussed in detail in Chapter 5. Also in Year 1, the issue of ground topography specification is addressed. For simulations of pollutant transport in a given region, a key prerequisite is the specification of the detailed ground topography. The local topography must be placed into a form suitable for generating an unstructured grid both on the topography itself and the atmospheric volume above it; this effort is documented in Chapter 6. In Year 2 of this project, items 1.3 and 2.1 were addressed. Weather data in the form of wind speeds, relative humidity, and baseline pollution levels may be input into the code in order to improve the real-world fidelity of the solutions. Of course, the computational atmospheric boundary layer (ABL) boundary condition developed in Year 1 may still be used when necessary. Cloud cover may be simulated via the levels of actinic flux allowed in photochemical reactions in the atmospheric chemistry model. The primary focus of Year 2 was the formulation of a multispecies capability with included chemical reactions (item 2.1). This proved to be a very arduous task, taking the vast majority of the time and personnel allocation for Year Two. The addition of this capability and related verification is documented in Chapter 7. A discussion of available tropospheric chemistry models is located in Chapter 8; and, a technology demonstrator for the full multispecies capability is detailed in Chapter 9. Item 2.3 has been partially addressed, in that the computation of sensitivity derivatives have been incorporated in the Tenasi code [7]. However, it has not been utilized in this project in order to compute probability distribution functions for pollutant deposition. In order to completely address the integration of weather and sensor data into the code (item 1.3) and integrate with existing sensor networks (item 3.1), a customizable interface was established. Weather data is most commonly available via a real database, and as such, support for accessing these databases is present in the solver source code. For integration functionality, a method of dynamic code customization was developed in Year 3, which is documented in Chapter 11.

Prehistoric floods on the Tennessee River—Assessing the use of stratigraphic records of past floods for improved flood-frequency analysis

Science.gov (United States)

Harden, Tessa M.; O'Connor, Jim E.

2017-06-14

Stratigraphic analysis, coupled with geochronologic techniques, indicates that a rich history of large Tennessee River floods is preserved in the Tennessee River Gorge area. Deposits of flood sediment from the 1867 peak discharge of record (460,000 cubic feet per second at Chattanooga, Tennessee) are preserved at many locations throughout the study area at sites with flood-sediment accumulation. Small exposures at two boulder overhangs reveal evidence of three to four other floods similar in size, or larger, than the 1867 flood in the last 3,000 years—one possibly as much or more than 50 percent larger. Records of floods also are preserved in stratigraphic sections at the mouth of the gorge at Williams Island and near Eaves Ferry, about 70 river miles upstream of the gorge. These stratigraphic records may extend as far back as about 9,000 years ago, giving a long history of Tennessee River floods. Although more evidence is needed to confirm these findings, a more in-depth comprehensive paleoflood study is feasible for the Tennessee River.

Orientation study of northern Arkansas. National Uranium Resource Evaluation program. Hydrogeochemical and stream-sediment reconnaissance

International Nuclear Information System (INIS)

Steele, K.F.

1982-08-01

Samples of ground water, stream water, and sediment were collected at 335 sites for an orientation study of northern Arkansas. Each stream site consisted of both sediment and stream water (if available), and each sediment sample was sieved to produce four size fractions for analysis. The orientation area included all or parts of Benton, Carroll, Madison, and Washington Counties. Several black shales, including the Chattanooga Shale, crop out in this area, and the Sylamore Sandstone Member has local radiation anomalies. The following analyses were performed for all water samples (both ground water and stream water): pH, conductivity, total alkalinity, temperature, nitrate, ammonia, phosphate and sulfate. Additional water was collected, filtered, and reacted with a resin that was then analyzed by neutron activation analysis for U, Br, Cl, F, Mn, Na, Al, and Dy. In addition, ground water samples were analyzed for He. The stream sediments were analyzed by neutron activation for U, Th, Hf, Ce, Fe, Mn, Sc, Ti, V, Al, Dy, Eu, La, Sm, Yb, and Lu

Experimental stress analysis and fatigue tests of five 24-in. NPS ANSI Standard B16.9 tees

International Nuclear Information System (INIS)

Moore, S.E.; Hayes, J.K.; Weed, R.A.

1985-03-01

Experimental stress analyses and low-cycle fatigue tests of five 24-in. nominal pipe size American National Standards Institute (ANSI) Standard B16.9 forged tees are documented in this report. The tees, designated as Oak Ridge National Laboratory tees T10, T11, T12, T13, and T16, were tested under subcontract at Combustion Engineering, Inc. in Chattanooga, Tennessee. Experimental stress analyses were conducted for 12 individual loadings on each tee. Each test model was instrumented with approx. 225, 1/8-in. three-gage, 45 0 strain rosettes on the inside and outside surfaces; and 6 linear variable differential transformers mounted on special nonflexible holding frames for measuring deflections and rotations of the pipe extensions. Following completion of the strain-gate tests, each tee was fatigue tested to failure with either a fully reversed displacement controlled in-plane bending moment on the branch or a cyclic internal pressure that ranged from a value slightly above zero to about 90% of the nominal yield pressure of the pipe extensions

Experimental stress analysis and fatigue tests of five 24-in. NPS ANSI Standard B16. 9 tees. [PWR; BWR

Energy Technology Data Exchange (ETDEWEB)

Moore, S.E.; Hayes, J.K.; Weed, R.A.

1985-03-01

Experimental stress analyses and low-cycle fatigue tests of five 24-in. nominal pipe size American National Standards Institute (ANSI) Standard B16.9 forged tees are documented in this report. The tees, designated as Oak Ridge National Laboratory tees T10, T11, T12, T13, and T16, were tested under subcontract at Combustion Engineering, Inc. in Chattanooga, Tennessee. Experimental stress analyses were conducted for 12 individual loadings on each tee. Each test model was instrumented with approx. 225, 1/8-in. three-gage, 45/sup 0/ strain rosettes on the inside and outside surfaces; and 6 linear variable differential transformers mounted on special nonflexible holding frames for measuring deflections and rotations of the pipe extensions. Following completion of the strain-gate tests, each tee was fatigue tested to failure with either a fully reversed displacement controlled in-plane bending moment on the branch or a cyclic internal pressure that ranged from a value slightly above zero to about 90% of the nominal yield pressure of the pipe extensions.

(Environmental technology)

Energy Technology Data Exchange (ETDEWEB)

Boston, H.L.

1990-10-12

The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

Predistribution of potassium iodide--the Tennessee experience

International Nuclear Information System (INIS)

Fowinkle, E.W.; Sell, S.H.; Wolle, R.H.

1983-01-01

Tennessee public health officials made a decision to predistribute potassium iodide tablets (KI) to householders in the vicinity of a nuclear power plant. The tablets would be stored until needed in the event of a radiation emergency. The officials believed that it was important to have the option available as a means of protecting nearby residents. KI, ingested before or soon after exposure to radioactive iodine, can act as a thyroid blocker to protect the gland from accepting further iodine and, therefore, the radiation. A pilot project was undertaken to deliver, door to door, a package that contained KI tablets in sufficient quantity to supply a starter dose to each member of households within a 5-mile radius of the Sequoyah nuclear power plant near Chattanooga. The package consisted of a vial of 14 130-mg tablets and a package insert from the manufacturer enclosed in a larger vial with a childproof cap. Home visitors who delivered the vials were professionals from the local public health departments, especially trained to answer questions about the project. About 66 percent of 5,591 homes accepted the medication. Extensive coverage of the project by information media was helpful in explaining local emergency plans as well as the KI distribution to the public

Geochemical behavior of Cs, Sr, Tc, Np, and U in saline groundwaters: Sorption experiments on shales and their clay mineral components: Progress report

International Nuclear Information System (INIS)

Meyer, R.E.; Arnold, W.D.; Ho, P.C.; Case, F.I.; O'Kelley, G.D.

1987-11-01

The Sedimentary Rock Program at the Oak Ridge National Laboratory is investigating shale to determine its potential suitability as a host rock for the disposal of high-level radioactive wastes (HLW). In support of this program, preliminary studies were carried out on sorption of cesium, strontium, technetium, neptunium, and uranium onto Chattanooga (Upper Dowelltown), Pierre, Green River Formation, Nolichucky, and Pumpkin Valley Shales under oxic conditions (air present). Three simulated groundwaters were used. One of the groundwaters was a synthetic brine made up to simulate highly saline groundwaters in the Pumpkin Valley Shale. The second was a 100/1 dilution of this groundwater and the third was 0.03 M NaHCO 3 . Moderate to significant sorption was observed under most conditions for all of the tested radionuclides except technetium. Moderate technetium sorption occurred on Upper Dowelltown Shale, and although technetium sorption was low on the other shales, it was higher than expected for Tc(VII), present as the anion TcO 4 - . Little sorption of strontium onto the shales was observed from the concentrated saline groundwater. These data can be used in a generic fashion to help assess the sorption characteristics of shales in support of a national survey. 10 refs., 4 figs., 23 tabs

RECOVERY OF URANIUM FROM LOW GRADE URANIUM BEARING ORES

Science.gov (United States)

Rhodes, H.B.; Pesold, W.F.; Hirshon, J.M.

1959-06-01

Recovery of U, Fe, and Al from Chattanooga shale is described. Ground shale (-4 to +325 mesh) is roasted to remove organic and volatile matter. The heated shale is then reacted with a chlorinating agent (CCl/sub 4/, COCl/sub 2/, Cl, and SCl) at 600 to 1000 C. The metal chloride vapor is separated from entrained solids and then contacted with a liquid alkali metal chloride which removes U. The U is reeovered by cooling and dissolving the bath followed by acidification and solvent extraction. A condensed phase of Al, Fe, and K chlorides is treated to separate Al as alumina by passing through a Fe/sub 2/O/ sub 3/ bed. The remaining FeCl/sub 3/ is oxidized by O/sub 2/ at 1000 C to form Fe/sub 2/O/sub 3/ and Cl/sub 2/. Alternatively, vapor from the U separation step may be passed to a liquid KCl bath at 500 to 650 C. The resulting mixture is oxidized to form Cl/sub 2/ and Fe/sub 2/O/sub 3/ + Al/sub 2/O/sub 3/. The Al and Fe are separated by reaction with NaOH at high temperatures and pressures. (T.R.H.)

Estimated radiological doses to the maximumly exposed individual and downstream populations from releases of tritium, strontium-90, ruthenium-106, and cesium-137 from White Oak Dam

International Nuclear Information System (INIS)

Little, C.A.; Cotter, S.J.

1980-01-01

Concentrations of tritium, 90 Sr, 106 Ru, and 137 Cs in the Clinch River for 1978 were estimated by using the known 1978 releases of these nuclides from the White Oak Dam and diluting them by the integrated annual flow rate of the Clinch River. Estimates of 50-year dose commitment to a maximumly exposed individual were calculated for both aquatic and terestrial pathways of exposure. The maximumly exposed individual was assumed to reside at the mouth of White Oak Creek where it enters the Clinch River and obtain all foodstuffs and drinking water at that location. The estimated total-body dose from all pathways to the maximumly exposed individual as a result of 1978 releases was less than 1% of the dose expected from natural background. Using appropriate concentrations of to subject radionuclides diluted downstream, the doses to populations residing at Harriman, Kingston, Rockwood, Spring City, Soddy-Daisy, and Chattanooga were calculated for aquatic exposure pathways. The total-body dose estimated for aquatic pathways for the six cities was about 0.0002 times the expected dose from natural background. For the pathways considered in this report, the nuclide which contributed the largest fraction of dose was 90 Sr. The largest dose delivered by 90 Sr was to the bone of the subject individual or community

Economic analysis of solar assisted absorption chiller for a commercial building

Science.gov (United States)

Antonyraj, Gnananesan

Dwindling fossil fuels coupled with changes in global climate intensified the drive to make use of renewable energy resources that have negligible impact on the environment. In this attempt, the industrial community produced various devices and systems to make use of solar energy for heating and cooling of building space as well as generate electric power. The most common components employed for collection of solar energy are the flat plate and evacuated tube collectors that produce hot water that can be employed for heating the building space. In order to cool the building, the absorption chiller is commonly employed that requires hot water at high temperatures for its operation. This thesis deals with economic analysis of solar collector and absorption cooling system to meet the building loads of a commercial building located in Chattanooga, Tennessee. Computer simulations are employed to predict the hourly building loads and performance of the flat plate and evacuated tube solar collectors using the hourly weather data. The key variables affecting the economic evaluation of such system are identified and the influence of these parameters is presented. The results of this investigation show that the flat plate solar collectors yield lower payback period compared to the evacuated tube collectors and economic incentives offered by the local and federal agencies play a major role in lowering the payback period.

Power lifting: people meeting the population challenge.

Science.gov (United States)

Dillon, L

1994-12-01

Whereas population pressures are usually associated with developing countries, developed countries like the US also suffer from population-associated problems. For example, in some US cities the infant mortality rate is worse than in the developing world. US policy-makers have found it useful to apply some of the programs used successfully in the developing world to problems at home. Efforts to increase the availability of health care services and education have led to the creation of the Healthy Start program in Baltimore, Maryland, which uses community residents to motivate their peers and provides counseling on family planning, education, and employment. In Oregon, an AIDS-prevention program, which makes condoms more accessible to teenagers, has been transplanted from Zaire. Chattanooga, Tennessee, has used techniques from Brazil to design public transportation systems and improve air quality. In communities across the country, activists are working to instill power in local residents as they seek ways to improve the environment and promote economic health. Modeled on an initiative in Bangladesh, community-run loan programs allow the development of microenterprises which help people develop self-employment opportunities. When women take part in these activities and become successfully employed, their children are given what is usually their first example of parental employment and a reason to hope for a better future.

Assistive Technology at the University of Tennessee-Chattanooga: Providing Pre-Service Educators with the Opportunity to Utilize Assistive Technology as an Instructional Strategy

Science.gov (United States)

Crider, Tiffani Kay; Johnston, Linda; Rutledge, Valerie; Doolittle, Amy L.; Beard, Larry

2014-01-01

With the legal mandates described in the Amendments to the Individuals with Disabilities Education Improvement Act Amendments (IDEIA) of 2004 and the No Child Left Behind Act (NCLB) of 2001, educators must meet the needs of all students in their inclusive classrooms. Today's diverse classrooms include students with a wide range of abilities. The…

Revisions to the original extent of the Devonian Shale-Middle and Upper Paleozoic Total Petroleum System

Science.gov (United States)

Enomoto, Catherine B.; Rouse, William A.; Trippi, Michael H.; Higley, Debra K.

2016-04-11

Technically recoverable undiscovered hydrocarbon resources in continuous accumulations are present in Upper Devonian and Lower Mississippian strata in the Appalachian Basin Petroleum Province. The province includes parts of New York, Pennsylvania, Ohio, Maryland, West Virginia, Virginia, Kentucky, Tennessee, Georgia, and Alabama. The Upper Devonian and Lower Mississippian strata are part of the previously defined Devonian Shale-Middle and Upper Paleozoic Total Petroleum System (TPS) that extends from New York to Tennessee. This publication presents a revision to the extent of the Devonian Shale-Middle and Upper Paleozoic TPS. The most significant modification to the maximum extent of the Devonian Shale-Middle and Upper Paleozoic TPS is to the south and southwest, adding areas in Tennessee, Georgia, Alabama, and Mississippi where Devonian strata, including potential petroleum source rocks, are present in the subsurface up to the outcrop. The Middle to Upper Devonian Chattanooga Shale extends from southeastern Kentucky to Alabama and eastern Mississippi. Production from Devonian shale has been established in the Appalachian fold and thrust belt of northeastern Alabama. Exploratory drilling has encountered Middle to Upper Devonian strata containing organic-rich shale in west-central Alabama. The areas added to the TPS are located in the Valley and Ridge, Interior Low Plateaus, and Appalachian Plateaus physiographic provinces, including the portion of the Appalachian fold and thrust belt buried beneath Cretaceous and younger sediments that were deposited on the U.S. Gulf Coastal Plain.

Future Recovery of Energy and Mineral Values from Organic-Rich Shales (Summary L'avenir de la production d'énergie et de la valeur minérale des schistes riches en matière organique (résumé

Directory of Open Access Journals (Sweden)

Park W. C.

2006-10-01

Full Text Available Oil shale deposits vary significantly in their geological nature and can represent enormous reserves of low grades ores for various minerals such as alumina, sodium carbonates, molybdenum, nickel, vanadium, and uranium. The treatment of these rocks for mineral values can be economically attractive when coupled with the production of synthetic oil. Mutually shared costs for extractinq the mineral values can be favorably affected by utilizing by-products from the oil shale retorting. These can include the residual char for a carbonaceous reductant or fuel, C02 for acidification, or lime and soda ash for caustic. Conversely, an inappropriate choice of oil shale retorting conditions can substantially lower subsequent recovery of mineral values from the spent shale. The proceeding considerations will be discussed for several oil shale deposits including: 1. The Green River formation in the mid-western United States which is not only oil rich but also represents a nearly inexhaustible domestic supply of alumina and sodium carbonates and 2. The block shale of Julia Creek, Queensland, Australia, the Devonian Chattanooga shale in the United States, the Cambrian Kulm shale in Sweden, the Permian Lodeve shale in southern France, and the Paleozoic shales from Korea and USSR for energy and metal values such as molybdenum, nickel, vanadium, and uranium. La nature géologique des dépôts de schistes à huile est très variée ; ces schistes peuvent représenter des réserves énormes de minerais à faible teneur de métaux tels que l'aluminium, le molybdène, le nickel, le vanadium, l'uranium, sans oublier le carbonate de sodium. Le traitement de ces roches pour leur valeur minérale peut être attractif économiquement s'il est associé à la production d'huile synthétique. La répartition des coûts d'extraction des métaux peut être favorablement affectée en utilisant les sous-produits du traitement des schistes à huile. Ceci peut comprendre le goudron

Geology of the Devonian black shales of the Appalachian Basin

Science.gov (United States)

Roen, J.B.

1984-01-01

Black shales of Devonian age in the Appalachian Basin are a unique rock sequence. The high content of organic matter, which imparts the characteristic lithology, has for years attracted considerable interest in the shales as a possible source of energy. The recent energy shortage prompted the U.S. Department of Energy through the Eastern Gas Shales Project of the Morgantown Energy Technology Center to underwrite a research program to determine the geologic, geochemical, and structural characteristics of the Devonian black shales in order to enhance the recovery of gas from the shales. Geologic studies by Federal and State agencies and academic institutions produced a regional stratigraphic network that correlates the 15 ft black shale sequence in Tennessee with 3000 ft of interbedded black and gray shales in central New York. These studies correlate the classic Devonian black shale sequence in New York with the Ohio Shale of Ohio and Kentucky and the Chattanooga Shale of Tennessee and southwestern Virginia. Biostratigraphic and lithostratigraphic markers in conjunction with gamma-ray logs facilitated long-range correlations within the Appalachian Basin. Basinwide correlations, including the subsurface rocks, provided a basis for determining the areal distribution and thickness of the important black shale units. The organic carbon content of the dark shales generally increases from east to west across the basin and is sufficient to qualify as a hydrocarbon source rock. Significant structural features that involve the black shale and their hydrocarbon potential are the Rome trough, Kentucky River and Irvine-Paint Creek fault zone, and regional decollements and ramp zones. ?? 1984.

An evaluation of trace element release associated with acid mine drainage

International Nuclear Information System (INIS)

Sullivan, P.J.; Yelton, J.L.

1988-01-01

The determination of trace element release from geologic materials, such as oil shale and coal overburden, is important for proper solid waste management planning. The objective of this study was to determine a correlation between release using the following methods: (1) sequential selective dissolution for determining trace element residencies, (2) toxicity characteristic leaching procedure (TCLP), and (3) humidity cell weathering study simulating maximum trace element release. Two eastern oil shales were used, a New Albany shale that contains 4.6 percent pyrite, and a Chattanooga shale that contains 1.5 percent pyrite. Each shale was analyzed for elemental concentrations by soluble, adsorbed, organic, carbonate, and sulfide phases. The results of the results of the selective dissolution studies show that each trace element has a unique distribution between the various phases. Thus, it is possible to predict trace element release based on trace element residency. The TCLP results show that this method is suitable for assessing soluble trace element release but does not realistically assess potential hazards. The results of the humidity cell studies do demonstrate a more reasonable method for predicting trace element release and potential water quality hazards. The humidity cell methods, however, require months to obtain the required data with a large number of analytical measurements. When the selective dissolution data are compared to the trace element concentrations in the TCLP and humidity cell leachates, it is shown that leachate concentrations are predicted by the selective dissolution data. Therefore, selective dissolution may represent a rapid method to assess trace element release associated with acid mine drainage

Radon and radon progeny in 70 houses in the Tennessee Valley area: study design and measurement methods

International Nuclear Information System (INIS)

Dudney, C.S.; Hawthorne, A.R.; Monar, K.P.; Quillen, J.L.; Clark, C. Jr.; Doane, R.W.; Wallace, R.G.; Reed, R.P.

1986-01-01

Levels of radon and its short-lived airborne progeny are being measured in a year-long study of 70 houses in four states in the Tennessee Valley. Various methods were used to solicit volunteers with differing degrees of success. Criteria for selection of houses in the study included presence of a lower level with cement floor and one or more block walls in contact with the soil, absence of obvious indications of technologically enhanced sources of radium, and proximity to one of four cities, (Knoxville, Chattanooga, Birmingham, or Florence). By design, most houses in the study are in the same neighborhood as at least one other house in the study. Houses range in age from newly constructed to about 40 years old. Most of the houses have more than 2000 square feet of finished floor space. The lower level encompasses a garage in most cases. More complete information pertaining to house characteristics will be gathered in the course of the study. Measurements are being made to obtain information on both location- and season-dependent variation of radon and radon progeny. Simultaneous measurements are made quarterly on both upper and lower levels of each house. Grab samples of air are collected and analyzed for radon using a modified Lucas cell technique. Short-term (10-minute) samples of airborne particulate material are collected and analyzed for radon progeny. One-week integrated measurements of working levels are made once each quarter using modified thermoluminescent dosimeters. Both three- and twelve-month integrated measurements of radon using track-etch monitors are being made. 19 references, 1 figures

Effects of experimental parameters on the sorption of cesium, strontium, and uranium from saline groundwaters onto shales: Progress report

International Nuclear Information System (INIS)

Meyer, R.E.; Arnold, W.D.; Case, F.I.; O'Kelley, G.D.

1988-11-01

This report concerns an extension of the first series of experiments on the sorption properties of shales and their clay mineral components reported earlier. Studies on the sorption of cesium and strontium were carried out on samples of Chattanooga (Upper Dowelltown), Pierre, Green River Formation, Nolichucky, and Pumpkin Valley Shales that had been heated to 120/degree/C in a 0.1-mol/L NaCl solution for periods up to several months and on samples of the same shales which had been heated to 250/degree/C in air for six months, to simulate limiting scenarios in a HLW repository. To investigate the kinetics of the sorption process in shale/groundwater systems, strontium sorption experiments were done on unheated Pierre, Green River Formation, Nolichucky, and Pumpkin Valley Shales in a diluted, saline groundwater and in 0.03-mol/L NaHCO 3 , for periods of 0.25 to 28 days. Cesium sorption kinetics tests were performed on the same shales in a concentrated brine for the same time periods. The effect of the water/rock (W/R) ratio on sorption for the same combinations of unheated shales, nuclides, and groundwaters used in the kinetics experiments was investigated for a range of W/R ratios of 3 to 20 mL/g. Because of the complexity of the shale/groundwater interaction, a series of tests was conducted on the effects of contact time and W/R ratio on the pH of a 0.03-mol/L NaHCO 3 simulated groundwater in contact with shales. 8 refs., 12 figs., 15 tabs

Hydrogeology and simulation of ground-water flow at Arnold Air Force Base, Coffee and Franklin counties, Tennessee

Science.gov (United States)

Haugh, C.J.; Mahoney, E.N.

1994-01-01

The U.S. Air Force at Arnold Air Force Base (AAFB), in Coffee and Franklin Counties, Tennessee, is investigating ground-water contamination in selected areas of the base. This report documents the results of a comprehensive investigation of the regional hydrogeology of the AAFB area. Three aquifers within the Highland Rim aquifer system, the shallow aquifer, the Manchester aquifer, and the Fort Payne aquifer, have been identified in the study area. Of these, the Manchester aquifer is the primary source of water for domestic use. Drilling and water- quality data indicate that the Chattanooga Shale is an effective confining unit, isolating the Highland Rim aquifer system from the deeper, upper Central Basin aquifer system. A regional ground-water divide, approximately coinciding with the Duck River-Elk River drainage divide, underlies AAFB and runs from southwest to northeast. The general direction of most ground-water flow is to the north- west or to the northwest or to the southeast from the divide towards tributary streams that drain the area. Recharge estimates range from 4 to 11 inches per year. Digital computer modeling was used to simulate and provide a better understanding of the ground-water flow system. The model indicates that most of the ground-water flow occurs in the shallow and Manchester aquifers. The model was most sensitive to increases in hydraulic conductivity and changes in recharge rates. Particle-tracking analysis from selected sites of ground-water contamination indicates a potential for contami- nants to be transported beyond the boundary of AAFB.

Impacts of invasive nonnative plant species on the rare forest herb Scutellaria montana

Science.gov (United States)

Sikkema, Jordan J.; Boyd, Jennifer N.

2015-11-01

Invasive plant species and overabundant herbivore populations have the potential to significantly impact rare plant species given their increased risk for local extirpation and extinction. We used interacting invasive species removal and grazer exclusion treatments replicated across two locations in an occurrence of rare Scutellaria montana (large-flowered skullcap) in Chattanooga, Tennessee, USA, to assess: 1) competition by invasive Ligustrum sinense (Chinese privet) and Lonicera japonica (Japanese honeysuckle) and 2) the role of invasive species in mediating Oedocoilus virginianus (white-tailed deer) grazing of S. montana. Contrary to our hypothesis that invasive species presence would suppress S. montana directly via competition, S. montana individuals experienced a seasonal increase in stem height when invasive species were intact but not when invasive species were removed. Marginally significant results indicated that invasive species may afford S. montana protection from grazers, and we suggest that invasive species also could protect S. montana from smaller herbivores and/or positively influence abiotic conditions. In contrast to growth responses, S. montana individuals protected from O. virginianus exhibited a decrease in flowering between seasons relative to unprotected plants, but invasive species did not affect this variable. Although it has been suggested that invasive plant species may negatively influence S. montana growth and fecundity, our findings do not support related concerns. As such, we suggest that invasive species eradication efforts in S. montana habitat could be more detrimental than positive due to associated disturbance. However, the low level of invasion of our study site may not be representative of potential interference in more heavily infested habitat.

Effects of irradiation on strength and toughness of commercial LWR vessel cladding

International Nuclear Information System (INIS)

Haggag, F.M.; Corwin, W.R.; Alexander, D.J.; Nanstad, R.K.

1987-01-01

The potential for stainless steel cladding to improve the fracture behavior of an operating nuclear reactor pressure vessel, particularly during certain overcooling transients, may depend greatly on the properties of the irradiated cladding. Therefore, weld overlay cladding irradiated at temperatures and to fluences relevant to power reactor operation was examined. The cladding was applied to a pressure vessel steel plate by the three-wire series-arc commercial method. Cladding was applied in three layers to provide adequate thickness for the fabrication of test specimens. The three-wire series-arc procedure, developed by Combustion Engineering, Inc., Chattanooga, Tennessee, produced a highly controlled weld chemistry, microstructure, and fracture properties in all three layers of the weld. Charpy V-notch and tensile specimens were irradiated at 288 0 C to fluence levels of 2 and 5 x 10 19 neutrons/cm 2 (>1 MeV). Postirradiation testing results show that, in the test temperature range from -125 to 288 0 C, the yield strength increased by 8 to 30%, ductility insignificantly increased, while there was almost no change in ultimate tensile strength. All cladding exhibited ductile-to-brittle transition behavior during Charpy impact testing, due to the dominance of delta-ferrite failures at low temperatures. On the upper shelf, energy was reduced, due to irradiation exposure, 15 and 20%, while the lateral expansion was reduced 43 and 41%, at 2 and 5 x 10 19 neutrons/cm 2 (>1 MeV), respectively. In addition, radiation damage resulted in 13 and 28 0 C shifts of the Charpy impact transition temperature at the 41-J level for the low and high fluences, respectively

Net energy from nuclear power

International Nuclear Information System (INIS)

Rotty, R.M.; Perry, A.M.; Reister, D.B.

1975-11-01

An analysis of net energy from nuclear power plants is dependent on a large number of variables and assumptions. The energy requirements as they relate to reactor type, concentration of uranium in the ore, enrichment tails assays, and possible recycle of uranium and plutonium were examined. Specifically, four reactor types were considered: pressurized water reactor, boiling water reactor, high temperature gas-cooled reactor, and heavy water reactor (CANDU). The energy requirements of systems employing both conventional (current) ores with uranium concentration of 0.176 percent and Chattanooga Shales with uranium concentration of 0.006 percent were determined. Data were given for no recycle, uranium recycle only, and uranium plus plutonium recycle. Starting with the energy requirements in the mining process and continuing through fuel reprocessing and waste storage, an evaluation of both electrical energy requirements and thermal energy requirements of each process was made. All of the energy, direct and indirect, required by the processing of uranium in order to produce electrical power was obtained by adding the quantities for the individual processes. The energy inputs required for the operation of a nuclear power system for an assumed life of approximately 30 years are tabulated for nine example cases. The input requirements were based on the production of 197,100,000 MWH(e), i.e., the operation of a 1000 MW(e) plant for 30 years with an average plant factor of 0.75. Both electrical requirements and thermal energy requirements are tabulated, and it should be emphasized that both quantities are needed. It was found that the electricity generated far exceeded the energy input requirements for all the cases considered

Inspector qualification guidelines

International Nuclear Information System (INIS)

Batty, A.C.; Van Binnebeek, J.J.; Ericsson, P.O.; Fisher, J.C.; Geiger, P.; Grandame, M.; Grimes, B.K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

1994-07-01

The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied

Inspector qualification guidelines

Energy Technology Data Exchange (ETDEWEB)

Batty, A. C.; Van Binnebeek, J. J.; Ericsson, P. O.; Fisher, J. C.; Geiger, P.; Grandame, M.; Grimes, B. K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

1994-07-15

The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied.

An "education for life" requirement to promote lifelong learning in an internal medicine residency program.

Science.gov (United States)

Panda, Mukta; Desbiens, Norman A

2010-12-01

Lifelong learning is an integral component of practice-based learning and improvement. Physicians need to be lifelong learners to provide timely, efficient, and state-of-the-art patient care in an environment where knowledge, technology, and social requirements are rapidly changing. To assess graduates' self-reported perception of the usefulness of a residency program requirement to submit a narrative report describing their planned educational modalities for their future continued medical learning ("Education for Life" requirement), and to compare the modalities residents intended to use with their reported educational activities. Data was compiled from the Education for Life reports submitted by internal medicine residents at the University of Tennessee College of Medicine Chattanooga from 1998 to 2000, and from a survey sent to the same 27 graduates 2 to 4 years later from 2000 to 2004. Twenty-four surveys (89%) were returned. Of the responding graduates, 58% (14/24) found the Education for Life requirement useful for their future continued medical learning. Graduates intended to keep up with a mean of 3.4 educational modalities, and they reported keeping up with 4.2. In a multivariable analysis, the number of modalities graduates used was significantly associated with the number they had planned to use before graduation (P  =  .04) but not with their career choice of subspecialization. The majority of residents found the Education for Life requirement useful for their future continued medical learning. Graduates, regardless of specialty, reported using more modalities for continuing their medical education than they thought they would as residents. Considering lifelong learning early in training and then requiring residents to identify ways to practice lifelong learning as a requirement for graduation may be dispositive.

Net energy from nuclear power

International Nuclear Information System (INIS)

Perry, A.M.; Rotty, R.M.; Reister, D.B.

1977-01-01

Non-fission energy inputs to nuclear fuel cycles were calculated for four types of power reactors and for two grades of uranium ore. Inputs included all requirements for process operations, materials, and facility construction. Process stages are mining, milling, uranium conversion, enrichment, fuel fabrication, reprocessing, waste disposal, reactor construction and operation, and all transportation. Principal inputs were analyzed explicitly; small contributions and facility construction were obtained from input-output tables. For major facilities, the latter approach was based on disaggregated descriptions. Enrichment energy was that of U.S. diffusion plants, with uranium tails assay retained as a variable parameter. Supplemental electrical requirements, as a percentage of lifetime electrical output, are 5-6% for LWRs (0.3 - 0.2% tails assay) using ores with 0.2% uranium and without recycle. Recycle of uranium and plutonium reduces the electrical requirements 30%. Chattanooga Shales (0.006% U) require one-third more electricity. Thermal energy requirements are about 5% of electrical output with conventional ores; shales raise this to about 14%, with 0.2% enrichment tails and full recycle. About one-tenth of the electrical supplements and about a third of the thermal energy supplements are required prior to operation. A typical LWR will repay its energy loan within 15 months, allowing for low initial load factors. Enrichment requiring only 10% as much separative work as gaseous diffusion would reduce electrical requirements about 80%, but have little effect on thermal energy inputs. HTGRs require slightly less supplemental energy than LWRs. HWRs (with natural uranium) require about one-third as much supplemental electricity, but half again as much thermal energy, largely for heavy water production. The paper presents detailed data for several combinations of reactor type, ore grade and tails assay and compares them with conventional power plants. It also exhibits

Fracture toughness curve shift in low upper-shelf welds (series 8)

International Nuclear Information System (INIS)

Iskander, S.K.; Nanstad, R.K.; Manneschmidt, E.T.

1995-01-01

This task examines the fracture toughness curve shifts and changes in shape for irradiated welds with low CVN upper-shelf energy (USE). The information developed under this task will augment information obtained from other HSSI tasks performed on two high-USE weldments under the Fifth and Sixth Irradiation Series and on a commercial, low USE under the Tenth Irradiation Series. The results will provide an expanded basis for accounting for irradiation-induced embrittlement in RPV materials. Three low-USE welds have been ordered from ABB-Combustion Engineering (ABB-CE), Chattanooga, Tennessee, and two of them have been delivered to ORNL. ABB-CE fabricated the welds for the Fifth and Sixth Series. Preliminary results of mechanical and chemical tests from these two welds are presented below. The Linde 80 flux was used for all three welds. One weld, Weld 1, was made with the 73W weld wire. Weld wire 73W had copper added to the melt to reduce the variations that are associated with copper-coated weld wire. The other two welds were fabricated with a commercially available copper-coated weld wire, L-TEC 44 heat 44112. One of these two welds, Weld 2, has a target copper level of 0.31 %. This copper level could not be attained using the copper-coated wire, and the coating will be stripped from the wire, which contains 0.07 % Cu. To attain the target copper level, supplemental copper will be added to the weld puddle using an ABB-CE proprietary process. This will slightly delay the delivery of weld 2, the expected delivery date is now the end of April 1995. Weld 3 was fabricated with the same heat of the L-TEC 44 copper-coated weld wire as weld 2, but with supplemental copper added to the weld puddle, which resulted in a weldment containing an average of 0.424 % Cu. The semiannual report for October 1993 through March 1994 discusses the reasons for the above choices of copper content and welding wire

Carbon Fiber Composite Materials for Automotive Applications

Energy Technology Data Exchange (ETDEWEB)

Norris, Jr., Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mainka, Hendrik [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-06-01

Volkswagen (VW) is internationally recognized for quantity and quality of world-wide vehicle production and the Oak Ridge National Laboratory (ORNL) is internationally recognized in materials research and development. With automotive production ramping up in the recently constructed VW Group of America facility in Chattanooga, Tennessee, ORNL and VW initiated discussions in 2012 concerning opportunities for collaboration around ORNL’s carbon fiber and composites programs. ORNL is conducting an internationally recognized program to develop and implement lower cost carbon fibers and composites for automotive and other “energy missions” for the US Department of Energy. Significant effort is ongoing in selecting, developing, and evaluating alternative precursors, developing and demonstrating advanced conversion techniques, and developing and tailoring surface treatment, sizings, and formatting fiber for specific composite matrices and end-use applications. ORNL already had North America’s most comprehensive suite of tools for carbon fiber research and development and established a semiproduction demonstration line referred to as the Carbon Fiber Technology Facility (CFTF) to facilitate implementation of low cost carbon fiber (LCCF) approaches in early 2013. ORNL and VW agreed to collaborate in a formal Cooperative Research and Development Agreement (NFE-12-03992) specifically focused on evaluating applicability of low cost carbon fiber products for potential vehicle components. The goal of the work outlined in this report was to develop and qualify uses for carbon fiber-reinforced structures in connection with civilian ground transportation. Significant progress was achieved in evaluating and understanding lignin-based precursor materials; however, availability of carbon fiber converted from lignin precursor combined with logistical issues associated with the Visa limitations for the VW participant resulted in significantly shortening of the collaboration

The value of adding transcutaneous neuromuscular electrical stimulation (VitalStim) to traditional therapy for post-stroke dysphagia: a randomized controlled trial.

Science.gov (United States)

Li, L; Li, Y; Huang, R; Yin, J; Shen, Y; Shi, J

2015-02-01

Dysphagia is not uncommon after stroke. Dysphagia may delay the functional recovery and substantially affects the quality of life after stroke, mainly if lest untreated. To detect and treat dysphagia as early as possible is critical for patients' recovery after stroke. Electrical stimulation has been reported as a treatment for pharyngeal dysphagia in recent studies, but the therapeutic effects of neuromuscular electrical stimulation (VitalStim®) therapy lacks convincing supporting evidence, needs further clinical investigation. To investigate the effects of neuromuscular electrical stimulation (VitalStim®) and traditional swallowing therapy on recovery of swallowing difficulties after stroke. Randomized controlled trial. University hospital. 135 stroke patients who had a diagnosis of dysphagia at the age between 50-80. 135 subjects were randomly divided into three groups: traditional swallowing therapy (N. = 45), VitalStim® therapy (N. = 45), and VitalStim® therapy plus traditional swallowing therapy (N. = 45). The traditional swallowing therapy included basic training and direct food intake training. Electrical stimulation was applied by an occupational therapist, using a modified hand-held battery-powered electrical stimulator (VitalStim® Dual Channel Unit and electrodes, Chattanooga Group, Hixson, TN, USA). Surface electromyography (sEMG), the Standardized Swallowing Assessment (SSA), Videofluoroscopic Swallowing Study (VFSS) and visual analog scale (VAS) were used to assess swallowing function before and 4 weeks after the treatment. The study included 118 subjects with dysphagia, 40 in the traditional swallowing therapy group and VitalStim® therapy group, 38 in the VitalStim and traditional swallowing therapy group. There were significant differences in sEMG value, SSA and VFSS scores in each group after the treatment (P VitalStim® and traditional swallowing therapy group than the other two groups (P VitalStim® therapy coupled with traditional

Women in medicine: still a long way to go, baby.

Science.gov (United States)

Williams, B

1999-09-01

No doubt about it, women have come a long way in the medical profession. The average female enrollment in our nation's medical schools is 42% and growing. Women physicians are entering more non-traditional fields and are running successful practices. They're working to change attitudes and overcome obstacles that have traditionally barred them from thriving in such a demanding field. They're getting creative with options that allow them to pursue their dream while raising a family. But the bars are still up on some windows, namely the ones that peek into the halls of organized medicine. Professional organizations and medical schools are still largely run by men. The Tennessee Medical Association recognizes the discrepancy and is working to make some changes. TMA's Executive Assistant for Membership Services Phyllis Franklin says leadership is rethinking the entire structure of the Association in the light of changing demographics. "We're looking at younger physicians, minorities, female physicians, academicians, and students; we want to get them involved in organized medicine," she says. The leadership structure is one area that is slowly changing. Franklin admits while the hierarchy has been male-dominated, the Association can now claim its first female vice president, Dr. Phyllis Miller of Chattanooga. "We don't have a lot of women leaders, but it's getting better, and there are a lot more opportunities in the committee structure." TMA officials say surveys are forthcoming that will help them gauge the needs and wants of its female membership and hopefully increase further that 11% number, up from 8.9% two years ago. In the meantime, Franklin encourages women physicians to make their wishes known. "Instead of not joining the TMA because of perceived barriers or stumbling blocks, we would certainly prefer that they help us identify obstacles and give us the opportunity to do what we can to make membership more appealing," she says. "This Association is truly for

Micromorphology and stable-isotope geochemistry of historical pedogenic siderite formed in PAH-contaminated alluvial clay soils, Tennessee, U.S.A

Science.gov (United States)

Driese, S.G.; Ludvigson, Greg A.; Roberts, J.A.; Fowle, D.A.; Gonzalez, Luis A.; Smith, J.J.; Vulava, V.M.; McKay, L.D.

2010-01-01

Alluvial clay soil samples from six boreholes advanced to depths of 400-450 cm (top of limestone bedrock) from the Chattanooga Coke Plant (CCP) site were examined micromorphologically and geochemically in order to determine if pedogenic siderite (FeCO3) was present and whether siderite occurrence was related to organic contaminant distribution. Samples from shallow depths were generally more heavily contaminated with polycyclic aromatic hydrocarbons (PAHs) than those at greater depth. The upper 1 m in most boreholes consisted of mixtures of anthropogenically remolded clay soil fill containing coal clinker, cinder grains, and limestone gravel; most layers of coarse fill were impregnated with creosote and coal tar. Most undisturbed soil (below 1 m depth) consisted of highly structured clays exhibiting fine subangular blocky ped structures, as well as redox-related features. Pedogenic siderite was abundant in the upper 2 m of most cores and in demonstrably historical (< 100 years old) soil matrices. Two morphologies were identified: (1) sphaerosiderite crystal spherulites ranging from 10 to 200 um in diameter, and (2) coccoid siderite comprising grape-like "clusters" of crystals 5-20 ??n in diameter. The siderite, formed in both macropores and within fine-grained clay matrices, indicates development of localized anaerobic, low-Eh conditions, possibly due to microbial degradation of organic contaminants. Stable-isotope compositions of the siderite have ??13C values spanning over 25%o (+7 to - 18%o VPDB) indicating fractionation of DIC by multiple microbial metabolic pathways, but with relatively constant ??18O values from (-4.8 ?? 0.66%o VPDB) defining a meteoric sphaerosiderite line (MSL). Calculated isotope equilibrium water ??18O values from pedogenic siderites at the CCP site are from 1 to 5 per mil lighter than the groundwater ??18O values that we estimate for the site. If confirmed by field studies in progress, this observation might call for a reevaluation of

Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

Energy Technology Data Exchange (ETDEWEB)

Pschirer, James [Alstom Power Inc., Windsor, CT (United States); Burgess, Joshua [Alstom Power Inc., Windsor, CT (United States); Schrecengost, Robert [Alstom Power Inc., Windsor, CT (United States)

2017-08-16

membrane panels,and performed simulated shop repairs on the panel fabricated using Grade 92. GE executed the program as the prime contractor under the direction of Principal Investigator Mr. James Pschirer. Other participants in this project included GE Boiler Engineering, GE Chattanooga Manufacturing, GE Materials Technology Center, GE Rocky Mountain Service Center, and a Technical Consultant from Electric Power Research Institute (EPRI).

Pipeline transportation of emerging partially upgraded bitumen

International Nuclear Information System (INIS)

Luhning, R.W.; Anand, A.; Blackmore, T.; Lawson, D.S.

2002-01-01

upgrading heavy oil, and the tank bottom recovery and remediation (TaBoRR) process, the value creation upgrading process, Genoil hydro-processor upgrading, Albian Muskeg River oil sands mining, Vapex Process for in situ upgrading, super critical partial oxidation (SUPOX), ionic liquid catalysts, biocatalyst upgrading, CAPRI in situ upgrading, the aquaconversion process, the ROSE process for partial upgrading, the Chattanooga process, the CANMET emulsion upgrading process, the UniPure sulphur removal and upgrading, and the Geotreater process. 40 refs., 14 tabs., 3 figs

Experience from the Inspection of Licensees' Outage Activities, Including Fire Protection Programmes, Event Response Inspections, and the Impact of the Fukushima Daiichi NPP Accident on Inspection Programmes. Workshop Proceedings, Chattanooga, Tennessee, United States, 7-10 April 2014

International Nuclear Information System (INIS)

2014-10-01

The main purpose of the workshop was to provide a forum of exchange of information on the regulatory inspection activities. Participants had the opportunity to meet with their counterparts from other countries and organisations to discuss current and future issues on the selected topics. They developed conclusions regarding these issues and hopefully, identified methods to help improve their own inspection programmes. The NEA Committee on Nuclear Regulatory Activities (CNRA) believes that an essential factor in ensuring the safety of nuclear installations is the continuing exchange and analysis of technical information and data. To facilitate this exchange the Committee has established working groups and groups of experts in specialised topics. The Working Group on Inspection Practices (WGIP) was formed in 1990 with the mandate '..to concentrate on the conduct of inspections and how the effectiveness of inspections could be evaluated..'. The WGIP facilitates the exchange of information and experience related to regulatory safety inspections between CNRA member countries. These proceedings cover the 12. International Workshop held by WGIP on regulatory inspection activities. This workshop, which is the twelfth in a series, along with many other activities performed by the Working Group, is directed towards this goal. The consensus from participants at previous workshops, noted that the value of meeting with people from other inspection organisations was one of the most important achievements. The focus of this workshop was on experience gained from regulatory inspection activities in three areas: - Inspection of Outage Activities Including Fire Protection Programmes. - Event Response Inspections. - The Impact of Inspection Programmes of the Fukushima Daiichi Nuclear Power Plant (NPP) Accident. The main objectives of the WGIP workshops are to enable inspectors to meet with inspectors from other organisations, to exchange information regarding regulatory inspection practices, to discuss the selected topics, to discuss contemporary inspection issues, and to develop conclusions and commendable practices (CPs) on the selected topics. As part of the registration, participants were asked to respond to a questionnaire describing practices within their own countries on the workshop topics. The complete compilation of questionnaire responses is contained in the appendix (NEA/CNRA/R(2014)8/ADD1) to this document. Approximately 51 participants from 19 different countries and one participant from IAEA took part in the workshop. Countries included: Belgium, Canada, the Czech Republic, Finland, France, Germany, India, Japan, Mexico, Poland, the Republic of Korea, the Russian Federation, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, the United Kingdom and the United States. Five discussion groups were established for the breakout sessions. One topic would only have one group with 11 participants instead of having two small groups. Each group consisted of inspectors from countries to ensure diversity of views for each of the topics. Discussion groups met for three separate sessions on one topic. The exchange between participants was open and active, and the groups formulated conclusions and identified CPs. Evaluation of the workshop results were based on questionnaire responses received from the participants at the closing of the workshop. The evaluation showed that, as in the past workshops, the highest value perceived, was in meeting and exchanging information with inspectors from other organisations. Responses also showed that the format selected was highly favoured and that more workshops of this type are supported in the future. The results of the evaluation also reflected that participants in exchanging information were provided a unique opportunity to 'calibrate' their own inspection methods against those from other countries. While exchanging inspection practices and learning new ideas were part of the main objectives, this opportunity to recognise and understand commonalties and differences is equally important. Overall discussions between the various participants both in discussion group sessions and throughout the workshop were extensive and meaningful. Ideas and practices regarding regulatory inspection activities were exchanged and it can be foreseen that these ideas will provide improved expertise when being applied in the future. The workshop conclusions include observations and CPs for each topic that were developed by the discussions groups. (authors)

A Roadmap for NEAMS Capability Transfer

Energy Technology Data Exchange (ETDEWEB)

Bernholdt, David E [ORNL

2011-11-01

The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring truly predictive modeling and simulation (M&S) capabilities to the nuclear engineering community in order to enable a new approach to the design and analysis of nuclear energy systems. From its inception, the NEAMS program has always envisioned a broad user base for its software and scientific products, including researchers within the DOE complex, nuclear industry technology developers and vendors, and operators. However activities to date have focused almost exclusively on interactions with NEAMS sponsors, who are also near-term users of NEAMS technologies. The task of the NEAMS Capability Transfer (CT) program element for FY2011 is to develop a comprehensive plan to support the program's needs for user outreach and technology transfer. In order to obtain community input to this plan, a 'NEAMS Capability Transfer Roadmapping Workshop' was held 4-5 April 2011 in Chattanooga, TN, and is summarized in this report. The 30 workshop participants represented the NEAMS program, the DOE and industrial user communities, and several outside programs. The workshop included a series of presentations providing an overview of the NEAMS program and presentations on the user outreach and technology transfer experiences of (1) The Advanced Simulation and Computing (ASC) program, (2) The Standardized Computer Analysis for Licensing Evaluation (SCALE) project, and (3) The Consortium for Advanced Simulation of Light Water Reactors (CASL), followed by discussion sessions. Based on the workshop and other discussions throughout the year, we make a number of recommendations of key areas for the NEAMS program to develop the user outreach and technology transfer activities: (1) Engage not only DOE, but also industrial users sooner and more often; (2) Engage with the Nuclear Regulatory Commission to facilitate their understanding and acceptance of NEAMS approach to predictive M&S; (3

Decommissioning the physics laboratory, building 777-10A, at the Savannah River Site (SRS)

International Nuclear Information System (INIS)

Musall, John C.; Cope, Jeff L.

2008-01-01

metal beams above-grade. The roofs were flat concrete slabs on metal beams. Building 777-10A was an important SRS research and development location. The reactors helped determine safe operational limits and loading patterns for fuel used in the SRS production reactors, and supported various low power reactor physics studies. All four reactors were shut down and de-inventoried in the 1970's. The building was DD and R 2007, Chattanooga, Tennessee, September 16-19, 2007 169 subsequently used by various SRS organizations for office space, audio/visual studio, and computer network hub. SRS successfully decommissioned Building 777-10A over a thirty month period at a cost of ∼$14 M (∼$290/ft 2 ). The decommissioning was a complex and difficult effort due to the building's radiological contamination, height, extensive basement, and thick concrete walls. Extensive planning and extensive hazard analysis (e.g. of structural loads/modifications leading to unplanned collapse) ensured the decommissioning was completed safely and without incident. The decommissioning met contract standards for residual contamination and physical/chemical hazards, and was the last in a series of decommissioning projects that prepared the lower A/M-Area for SRS's environmental restoration program

The new 2.0 l TDI {sup registered} to fulfill American emission standards in Volkswagens new Passat; Der neue 2,0l TDI {sup registered} zur Erfuellung der amerikanischen Emissionsgesetze in Volkswagens neuem Passat

Energy Technology Data Exchange (ETDEWEB)

Kahrstedt, Joern; Dorenkamp, Richard; Kuiken, Sander; Greiner, Michael; Kuehne, Ingo; Nigro, Giampaolo; Duesterdiek, Thorsten; Veldeten, Burkhard; Thoem, Norbert [Volkswagen AG, Wolfsburg (Germany)

2011-07-01

Volkswagen introduced the all-new Passat in 2011 at the Detroit Motor Show in the USA. It is a new midsize sedan designed exclusively for the American market and will be built at a completely new plant in Chattanooga, Tennessee. The second-generation 2.0l TDI {sup registered} engine familiar from Europe was extensively modified and further developed for the new Passat, in order to comply with the American BIN5/ULEV emission limits. For this purpose the engine's untreated emissions had to be lowered and, in combination with exhaust emission control by selective catalytic reduction (SCR), compliance with the emission limits throughout the car's operating life ensured. An effective measure for lowering the engine's untreated emissions has proved to be the low-pressure EGR system (LP EGR) [1] introduced on the first-generation 2.0l TDI {sup registered} BIN5 engine. In the course of ongoing development of the LP EGR system, work continued on reducing pressure losses in the system, and charge-air cooling was converted from air to water cooling. Water-cooled charge-air cooling enables intake pipe temperature control independent of ambient temperature, and due to the elimination of throttling and the associated reduction in volume improves road dynamics. Systematic elimination of throttling restrictions in the gas system, combined with improved turbocharging, led to a significant drop in fuel consumption and optimal road performance. As a means of stabilizing untreated emissions in the engine, cylinder-pressure control of combustion was carried-over from the first-generation 2.0l TDI BIN5 engine. Thanks to the closed-loop control of the indicated mean pressure and the centre of combustion with the pressure sensor integrated into the glow-plug, it was possible to minimize the influences of fluctuating fuel quality and component tolerances. The exhaust system was completely revised in order to achieve maximum NOX conversion in the SCR catalytic converter. The

News & Announcements

Science.gov (United States)

2000-02-01

Office of Pollution Prevention and Toxics (mail code 7406), U. S. Environmental Protection Agency, 401 M Street, SW, Washington, DC 20560; phone: 202/260-2659; fax: 202/260-0816; http://www.epa.gov/greenchemistry. 16th BCCE, July 30-August 3, 2000 The 16th Biennial Conference on Chemical Education will be held at the University of Michigan, Ann Arbor, between July 30 and August 3, 2000. The meeting is promising to have a very full program. As of December 3, 1999 (the deadline for the submission of proposals for symposia and workshops), 64 of each had been submitted. Information about these proposed presentations, as well as about other aspects of the conference, are posted on the BCCE website at http://www.umich.edu/ bcce. If you wish to hold a meeting of your organization at the time of the conference, please let the organizers know at bcce@umich.edu so that space can be set aside. And please plan to attend! Teaching/Research Sabbatical Fellowships The University of Tennessee-Knoxville announces its designation by the National Science Foundation as one of three Research Sites for Educators in Chemistry (RSE). The program offers 12- 15-month teaching/research sabbatical fellowships. Fellows will spend a semester at University of Tennessee-Knoxville, a semester at a research-active partner (Berea College, the University of the South-Sewanee, or the University of Tennessee-Chattanooga), and a summer in research at UT-K, a partner school, or in industry. Fellows will have minimal teaching loads, continuous involvement in collaborative research in environmental and/or chemical analysis, and exposure to a successful model for establishing a thriving undergraduate research program. For information contact Kelsey D. Cook; kcook@utk.edu; phone: 865-974-8019. The other two RSEC sites are Georgia Tech (contact is Kent Barefield; kent.barefield@chemistry.gatech.edu) and the University of New Mexico (contact is Dana Brabson; gb6s@unm.edu). Soaring Endowments: Research Corp. Report