WorldWideScience

Sample records for cern ps multi-turn

  1. The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers

    CERN Document Server

    Schipper, J; Boucly, C; Carlier, E; Fowler, T; Gaudillet, H; Noulibos, R; Sermeus, L

    2010-01-01

    To reduce the beam losses when preparing high intensity proton beam for the CERN Neutrino to Gran Sasso (CNGS) facility, a new Multi-Turn extraction (MTE) scheme has been implemented in the PS, to replace the present Continuous Transfer (CT) to the SPS. Industrial off-the-shelf components have been used for the low-level part of the MTE kicker control system. National Instruments PXI systems are used to control the high voltage pulse generators and a SIEMENS programmable logic controller (PLC) handles the centralised oil cooling and gas insulation sub-systems

  2. CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

    CERN Document Server

    Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

    2013-01-01

    The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

  3. Numerical Simulations to Evaluate the Performance of CERN PS Dummy Septum to Reduce Irradiation for the Multi-Turn Extraction

    CERN Document Server

    Hernalsteens, C; Gilardoni, S; Giovannozzi, M

    2013-01-01

    The losses created by the proposed Multi-Turn Extraction (MTE) at the CERN PS induce high activation of the magnetic extraction septum due to the de-bunched longitudinal beam structure requested to transfer the beam to the SPS. A mitigation measure is under study aiming at localizing the losses in a well-shielded area by shadowing the magnetic extraction septum thanks to a septum-like passive device. Such a solution is based on a so-called dummy septum, a blade which absorbs particles during the rise time of the extraction kickers for MTE beams. The efficiency of the scheme is presented in this paper. The quantitative estimate is based on detailed simulations that analyze the beam-matter interaction and provide a determination of the shadowing effect of the dummy septum.

  4. Intensity effects in the formation of stable islands in phase space during the multi-turn extraction process at the CERN PS

    CERN Document Server

    Machida, Shinji; Prior, Chris; Gilardoni, Simone; Giovannozzi, Massimo; Hirlander, Simon; Huschauer, Alexander

    2016-01-01

    The CERN PS utilises a Multi-Turn Extraction (MTE) scheme to stretch the beam pulse length to optimise the filling process of the SPS. MTE is a novel technique to split a beam in transverse phase space into nonlinear stable islands. The recent experimental results indicate that the positions of the islands depend on the total beam intensity. Particle simulations have been performed to understand the detailed mechanism of the intensity dependence. The analysis carried out so far suggests space charge effects through image charges and image currents on the vacuum chamber and the magnets iron cores dominate the observed behaviour. In this talk, the latest analysis with realistic modelling of the beam environment is discussed and it is shown how this further improves the understanding of intensity effects in MTE.

  5. Impedance studies of the dummy septum for CERN PS multi-turn extraction

    CERN Document Server

    Persichelli, S; Berrig, O; Herbst, J; Kuczerowski, J; Giovannozzi, M; Salvant, B

    2014-01-01

    A protection septum has been installed in the CERN PS section 15 in order to mitigate irradiation of the magnetic septum 16 for fast extractions towards the SPS. Impedance studies have been performed, showing that beams circulating in the septum during extraction generate sharp resonances in the coupling impedance. Impedance measurements with the wire technique have been performed, showing a good agreement with simulations. Instability rise times of trapped modes have been evaluated and compared to extraction duration. Solutions for reducing the impact on the stability of the beam have been considered

  6. Optics measurements and transfer line matching for the SPS injection of the CERN Multi-Turn Extraction beam

    CERN Document Server

    Benedetto, E; Cettour Cave, S; Follin, F; Gilardoni, S; Giovannozzi, M; Roncarolo, F

    2010-01-01

    Dispersion and beam optics measurements were carried out in the transfer line between the CERN PS and SPS for the new Multi-Turn Extraction beam. Since the extraction conditions of the four islands and the core are different and strongly dependent on the non-linear effects used to split the beam in the transverse plane, a special care was taken during the measurement campaigns. Furthermore, an appropriate strategy was devised to minimize the overall optical mismatch at SPS injection. All this led to a new optical configuration that will be presented in the paper.

  7. 3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4

    CERN Document Server

    Forte, Vincenzo; Benedetto, Elena; Bracco, Chiara; Cieslak-Kowalska, Magdalena; Di Giovanni, Gian Piero

    2016-01-01

    In the frame of the LIU (LHC Injectors Upgrade) project, the CERN PS Booster is going to be renovated to host a new H⁻ charge-exchange injection from the Linac4. One important feature of the new injection scheme is the possibility to tailor a wide range of 3D emittances for CERN's different users in an intensity span in the order of 5·10⁹ to 1.6·10¹³ protons per PSB ring. This paper gives an overview of 3D multi-turn injection techniques, focusing on the future LHC beams, which aim at reaching high brightness, and on highest intensity beams (ISOLDE), where losses are the main concern. Complete RF capture simulations and transverse injection maps, including space charge effects, are presented and also intended to be used during the commissioning with Linac4.

  8. Multi-turn Extraction system of the PS at CERN: information management and planning

    OpenAIRE

    Vergara Fernández, Rocío

    2007-01-01

    CERN es el Consejo Europeo de la Investigación Nuclear. Es el mayor laboratorio de física de partículas, donde científicos de todo el mundo estudian la estructura de la materia y las fuerzas que las mantienen unidas para así conseguir entender mejor el comportamiento y el origen del Universo. Actualmente se está construyendo el mayor acelerador del mundo (ya en su fase de puesta en marcha), el Large Hadron Collider (LHC) situado en la frontera franco-suiza, ocupando un túnel 27...

  9. Feasibility study of a 2 GeV superconducting $H^{-}$ linac as injector for the CERN PS

    CERN Document Server

    Garoby, R; Hill, C E; Lombardi, A M; Ostroumov, P N; Tessier, J M; Vretenar, Maurizio

    1998-01-01

    This preliminary feasibility study is based on the availability of the CERN LEP2 superconducting RF system after LEP de-commissioning. The option that is explored is to use this system as part of a high energy H- linac injecting at 2 GeV into the CERN PS, with the aim of reliably providing at its output twice the presently foreseen transverse beam brightness at the ultimate intensity envisaged for LHC. This requires the linac to be pulsed at the PS repetition rate of 0.8 Hz with a mean beam current of 10 mA which is sufficient for filling the PS in 240 ms (i.e. about 100 turns) with the ultimate intensity foreseen for injection for the LHC. The linac is composed of two RFQs with a chopping section, a room temperature DTL, a superconducting section with reduced beta cavities up to 1 GeV, and a section of LEP2 cavities up to 2 GeV. This study deals, in particular, with the problems inherent in H- acceleration up to high energy and in the pulsed operation of SC cavities. Means for compensating microphonic vibrat...

  10. Rejuvenation of the controls of the CERN PS/ISOLDE facility using industrial components

    CERN Document Server

    Allard, J.; Locci, F.; Mornacchi, G.

    2001-01-01

    In the context of the general consolidation of the CERN ISOLDE facility, a project has been started to upgrade the ISOLDE control system. We describe the new ISOLDE control system, emphasizing the systematic use of industrial components such as PLCs and field buses, their integration with the existing, VME based, CERN PS control system and their potential applicability to both existing and new controls problems at the CERN PS complex. We also discuss how to extend a PLC-based solution to the case where real-time response is an issue.

  11. A&T Sector Note on the PS transverse feedback

    CERN Document Server

    Coly, Marcel; Blas, Alfred; Sterbini, Guido; CERN. Geneva. ATS Department

    2017-01-01

    In a particle accelerator, several contributions can degrade the beam quality and particularly the beam transverse emittance. In this document we will describe a system used in the CERN Proton Synchrotron (PS) to cope with the injection steering errors and the transverse instabilities: the PS transverse feedback (PS TFB). As time progresses, this system is also being used for other purpose, to increase in a controlled way the beam transverse emittance and to excite the beam for the Multi-Turn-Extraction (MTE). In 2016, it has been successfully used on some operational beams to damp injection oscillations. This allowed to test the reliability of the system for its operational deployment. A piquet service is available in case of problem.

  12. Linac4, a New Injector for the CERN PS Booster

    CERN Document Server

    Garoby, R; Gerigk, F; Hanke, K; Lombardi, A; Pasini, M; Rossi, C; Sargsyan, E; Vretenar, M

    2006-01-01

    The first bottle-neck towards higher beam brightness in the LHC injector chain is due to space charge induced tune spread at injection into the CERN PS Booster (PSB). A new injector called Linac4 is proposed to remove this limitation. Using RF cavities at 352 and 704 MHz, it will replace the present 50 MeV proton Linac2, and deliver a 160 MeV, 40 mA H- beam. The higher injection energy will reduce space charge effects by a factor of 2, and charge exchange will drastically reduce the beam losses at injection. Operation will be simplified and the beam brightness required for the LHC ultimate luminosity should be obtained at PS ejection. Moreover, for the needs of non-LHC physics experiments like ISOLDE, the number of protons per pulse from the PSB will increase by a significant factor. This new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios. It is also designed to become the low energy part of a future 3.5 GeV, multi-megawatt superconducting linac (SPL). The present desig...

  13. The CERN PS/SL Controls Java Application Programming Interface

    International Nuclear Information System (INIS)

    I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

    1999-01-01

    The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

  14. Supervision Application for the New Power Supply of the CERN PS (POPS)

    CERN Document Server

    Milcent, H; Gonzalez-Berges, M; Voitier, A

    2011-01-01

    The power supply system for the magnets of the CERN PS has been recently upgraded to a new system called POPS (POwer for PS). The old mechanical machine has been replaced by a system based on capacitors. The equipments as well as the low level controls have been provided by an external company (CONVERTEAM). The supervision application has been developed at CERN reusing the technologies and tools used for the LHC Accelerator and Experiments (UNICOS and JCOP frameworks, SIMATIC WinCC Open Architecture SCADA tool). The paper describes the full architecture of the control application, and the challenges faced for the integration with an outsourced system. The benefits of reusing the CERN industrial control frameworks and the required adaptations will be discussed. Finally, the initial operational experience will be presented.

  15. Electron cloud in the CERN accelerators (PS, SPS, LHC)

    International Nuclear Information System (INIS)

    Iadarola, G; Rumolo, G

    2013-01-01

    Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely packed bunches (i.e. with spacings below 150ns). Beside the above mentioned indicators, other typical signatures were seen in this machine (due to its operation mode and/or more refined detection possibilities), like heat load in the cold dipoles, bunch dependent emittance growth and degraded lifetime in store and bunch-by-bunch stable phase shift to compensate for the energy loss due to the electron cloud. An overview of the electron cloud status in the different CERN machines (PS, SPS, LHC) will be presented in this paper, with a special emphasis on the dangers for future operation with more intense beams and the necessary countermeasures to mitigate or suppress the effect. (author)

  16. The PS Booster hits 40

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    Many accelerators’ "round" birthdays are being celebrated at CERN these days – the PS turned 50 in 2009, the SPS was 35 in 2011, and this year it's the turn of the PS Booster to mark its 40th anniversary. Originally designed to accelerate 1013 protons to 800 MeV, it has far exceeded its initial design performance over the years.   The PS Booster in the 1970s. Imagine the scene: a group of accelerator physicists staring expectantly at a monitor, when suddenly a shout of joy goes up as a signal flickers across the screen. Does that sound familiar? Well, turn the clock back 40 years (longer hair, wider trouser legs) and you have the situation at the PS Booster on 26 May 1972. On that day, beam was injected into the Booster for the first time. “It was a real buzz,” says Heribert Koziol, then Chairman of the Running-in Committee. “We were very happy – and also a little relieved – when the beam finally...

  17. Status of the Upgrade of the CERN PS Booster

    CERN Document Server

    Hanke, K; Angoletta, M; Bartmann, W; Bartolome, S; Benedetto, E; Bertone, C; Blas, A; Bonnal, P; Borburgh, J; Bozzini, D; Butterworth, A; Carli, C; Carlier, E; Cole, J; Dahlen, P; Delonca, M; Dobers, T; Findlay, A; Froeschl, R; Hansen, J; Hay, D; Jensen, S; Lacroix, J; Le Roux, P; Lopez Hernandez, L; Maglioni, C; Masi, A; Mason, G; Mathot, S; Mikulec, B; Muttoni, Y; Newborough, A; Nisbet, D; Olek, S; Paoluzzi, M; Perillo-Marcone, A; Pittet, S; Puccio, B; Raginel, V; Riffaud, B; Ruehl, I; Sarrió Martínez, A; Tan, J; Todd, B; Venturi, V; Weterings, W

    2013-01-01

    The CERN PS Booster (PSB) is presently undergoing an ambitious consolidation and upgrade program within the frame of the LHC Injectors Upgrade (LIU) project. This program comprises a new injection scheme for H- ions from CERN’s new Linac4, the replacement of the main RF systems and an energy upgrade of the PSB rings from 1.4 to 2 GeV which includes the replacement of the main magnet power supply as well as the upgrade of the extraction equipment. This paper describes the status and plans of this work program.

  18. Study of an energy upgrade of the CERN PS Booster

    CERN Document Server

    Hanke, K; Angoletta, M E; Bartmann, W; Bartolome, S; Bertone, C; Blas, A; Borburgh, J; Bozzini, D; Butterworth, A; Carli, C; Dahlen, P; Dobers, T; Findlay, A; Folch, R; Gilbert, N; Hansen, J; Hermanns, T; Jensen, S; Le Roux, P; Lopez-Hernandez, L A; Mahner, E; Masi, A; Mikulec, B; Muttoni, Y; Newborough, A; Nisbet, D; Nonis, M; Olek, S; Paoluzzi, M; Pittet, S; Puccio, B; Raginel, V; Ruehl, I; Tan, J; Todd, B; Weterings, W; Widorski, W

    2011-01-01

    CERN’s LHC injector chain will have to deliver beams with ultimate brilliance as the LHC is heading for increased luminosity in the coming years. In order to overcome bottlenecks in the injector chain, an increase of the beam transfer energy from the CERN Proton Synchrotron Booster (PSB) to the Proton Synchrotron (PS) has been investigated as a possible upgrade scenario. This paper gives an overview of the technical solutions and summarizes the conclusions of the feasibility study.

  19. Multiturn Extraction Based on Trapping in Stable Islands at CERN PS: Recent Measurement Advances

    CERN Multimedia

    Cappi, R; Giovannozzi, Massimo; Martini, M; Métral, Elias; Müller, A S; Sakumi, A; Steerenberg, R

    2004-01-01

    Recently a novel approach to perform multi-turn extraction was proposed based on beam splitting in the transverse phase space by means of trapping inside stable islands. During the year 2002, preliminary measurements at the CERN Proton Synchrotron with a low-intensity, singlebunch, proton beam, confirmed the possibility of generating various beamlets starting from a single Gaussian beam. The experimental campaign continued also during the year 2003 to assess a number of key issues, such as the feasibility of trapping with high-intensity beam and capture efficiency. The experimental results are presented and discussed in detail in this paper.

  20. Process equipment data organisation in CERN PS controls

    International Nuclear Information System (INIS)

    Casalegno, L.; Cuperus, J.; Sicard, C.H.

    1990-01-01

    The CERN PS control system has a widely distributed architecture, mainly for fast response in a real-time environment. The organisation of the data for equipment access must be compatible with this architecture and give efficient program access to the data. Moreover, it must also offer managerial features such as data integrity, easy backup and restoration, adaptibility to changes in data structure, initialisation, data-entry facilities and automatic documentation. This paper shows how one can take advantage of a commercial data-base management system with its associated tools, adding to it some object-oriented programming concepts to meet the objectives of a manageable distributed data organisation having good run-time performance features and using a reasonable manpower investment. (orig.)

  1. PS Booster - Festive colloquium

    CERN Multimedia

    2012-01-01

    A festive colloquium will be held to celebrate the 40th anniversary of the PS Booster on Friday, 28 September at 2 p.m. in the CERN council chamber. The meeting will be open to everybody. Read more on the PS Booster in the CERN Bulletin and in the CERN Courier.

  2. Design of the New Wideband RF System for the CERN PS Booster

    CERN Document Server

    Paoluzzi, Mauro; Angoletta, Maria Elena; Arnaudon, Luca; Energico, Salvatore; Findlay, Alan; Haase, Matthias; Jaussi, Michael; Jones, Anthony; Landré, David; Molendijk, John; Quartullo, Danilo; Shaposhnikova, Elena

    2016-01-01

    For the renovation and upgrade of the CERN PS Booster (PSB) RF systems a development project was launched in 2012. The design, based on a new approach, aimed at replacing the existing tuned, narrowband RF systems with wideband, modular, solid-state driven units. A wide range of issues had to be addressed spanning from RF power production, radiation hardness of solid-state devices, active cancellation of beam-induced voltages, dedicated low-level electronics allowing multi-harmonic operation and beam stability. Following a three-year prototyping and testing campaign and two international reviews, the project endorsement came at the end of year 2015. It foresees the complete removal of present h1, h2 and h10 systems and the deployment of a new one covering all the frequency ranges from 1 MHz to 18 MHz. The four PSB rings will be equipped with 144 identical acceleration cells providing 24 kV total RF voltage per ring. This paper describes the design concepts, the retained solutions, the expected performances and...

  3. Simulation of Instability at Transition Energy with a New Impedance Model for CERN PS

    CERN Document Server

    Wang, Na; Biancacci, Nicolo; Migliorati, Mauro; Persichelli, Serena; Sterbini, Guido

    2016-01-01

    Instabilities driven by the transverse impedance are proven to be one of the limitations for the high intensity reach of the CERN PS. Since several years, fast single bunch vertical instability at transition energy has been observed with the high intensity bunch serving the neu-tron Time-of-Flight facility (n-ToF). In order to better understand the instability mechanism, a dedicated meas-urement campaign took place. The results were compared with macro-particle simulations with PyHEADTAIL based on the new impedance model developed for the PS. Instability threshold and growth rate for different longitu-dinal emittances and beam intensities were studied.

  4. Design of Injection and Extraction Systems with Optimisation of Lattice and Layout for the CERN PS2 Synchrotron

    CERN Document Server

    Bartmann, W

    2009-01-01

    The CERN Proton Synchrotron PS2 is one of the foreseen accelerators for the LHC injector upgrade. This upgrade aims first at increasing the instantaneous luminosity of LHC and second at providing a reliable beam for the CERN accelerator complex. From this aspect, the main characteristics of the PS2 are high reliability for high intensity beams. The goal of this thesis was the design of the machine’s lattice and injection/extraction systems meeting the constraints coming mainly from the LHC beam type but also from beam requirements of experiments at PS2 and the SPS. In the design, the given energy range together with filling schemes for different beam types and RF cogging were first used to define the circumference of the machine. Estimates on the space requirements of injection/extraction systems were made in order to divide the total machine length between arc and long straight section. Existing tunnels for transfer lines together with the minimisation of the total transfer line length favoured a race trac...

  5. Status of the anti-proton production beam in the CERN PS

    International Nuclear Information System (INIS)

    Cappi, R.; Evans, B.J.; Garoby, R.

    1990-01-01

    A new scheme was put into operation in November 1988 to upgrade the proton beam delivered by the 26 GeV Proton Synchrotron (PS) for anti-proton production. It makes use of quasi-adiabatic manipulations of the RF parameters to squeeze a beam filling 1/2 of the PS circumference into a 1/4 turn and can in theory preserve the longitudinal emittance. A maximum intensity of 1.68 e 13 ppp in 5 bunches at 26 GeV has been reached in the course of 22 weeks of operation. The limitations of the performance are analysed together with possible improvements. (author) 6 refs., 9 figs

  6. The PS locomotive runs again

    CERN Multimedia

    2001-01-01

    Over forty years ago, the PS train entered service to steer the magnets of the accelerator into place... ... a service that was resumed last Tuesday. Left to right: Raymond Brown (CERN), Claude Tholomier (D.B.S.), Marcel Genolin (CERN), Gérard Saumade (D.B.S.), Ingo Ruehl (CERN), Olivier Carlier (D.B.S.), Patrick Poisot (D.B.S.), Christian Recour (D.B.S.). It is more than ten years since people at CERN heard the rumbling of the old PS train's steel wheels. Last Tuesday, the locomotive came back into service to be tested. It is nothing like the monstrous steel engines still running on conventional railways -just a small electric battery-driven vehicle employed on installing the magnets for the PS accelerator more than 40 years ago. To do so, it used the tracks that run round the accelerator. In fact, it is the grandfather of the LEP monorail. After PS was commissioned in 1959, the little train was used more and more rarely. This is because magnets never break down, or hardly ever! In fact, the loc...

  7. VME Switch for CERN's PS Analog Video System

    CERN Document Server

    Acebes, I; Heinze, W; Lewis, J; Serrano, J

    2003-01-01

    Analog video signal switching is used in CERN's Proton Synchrotron (PS) complex to route the video signals coming from Beam Diagnostics systems to the Meyrin Control Room (MCR). Traditionally, this has been done with custom electromechanical relay-based cards controlled serially via CAMAC crates. In order to improve the robustness and maintainability of the system, while keeping it analog to preserve the low latency, a VME card based on Analog Devices' AD8116 analog matrix chip has been developed. Video signals go into the front panel and exit the switch through the P2 connector of the VME backplane. The module is a 16 input, 32 output matrix. Larger matrices can be built using more modules and bussing their outputs together, thanks to the high impedance feature of the AD8116. Another VME module takes the selected signals from the P2 connector and performs automatic gain to send them at nominal output level through its front panel. This paper discusses both designs and presents experimental test results.

  8. Injection Bump Synchronization Study for the CERN PS

    CERN Document Server

    Serluca, Maurizio; Gilardoni, Simone; CERN. Geneva. ATS Department

    2016-01-01

    In the framework of the LHC Injector Upgrade (LIU) project the CERN PS injection kinetic energy will be upgraded from 1.4 to 2 GeV. The present injection bump is made by four bumpers in Straight Section (SS) 40, 42, 43, 44 and it will be converted in a five bumpers system to allow additional flexibility in the bump shape with a reduction of the proton losses during the bump closure. The injection section SS42 has being redesigned to accommodate a new eddy current septum which will host a new bumper magnet in the same vacuum vessel due to reduced longitudinal space availability. The synchronization and amplitude variation of the power converter of the in-vacuum bumper 42 with respect to the remaining outside vacuum bumpers 40, 41, 43, 44 can lead to orbit distortion and consequent losses during injection. In this note we present the experimental results from Machine Development (MD) studies along with simulations for the present system at 1.4 GeV to quantify the acceptable orbit distortion and the performance ...

  9. CERN's Community "Log Book" turns 50

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    For five decades, the CERN Bulletin has been a staple of the Organization. As CERN has grown as a laboratory and a community, the Bulletin has been there to cover each development as it happens. In honour of the publication's 50th anniversary, we're taking a trip through CERN’s history via the headings and hidden corners of its internal newsletter.     It's 1965 and CERN - now 11 years old - has matured from a simple lab to a fledgling community. While news could once spread in a single afternoon, CERN's growth necessitated a new approach to the sharing of internal information. Meanwhile, the CERN Courier - the only publication in town - was approaching a more global physics audience – an audience for whom CERN road closures were not breaking news. And so, in March 1965, the Weekly Bulletin was born. What was meant as a simple newsletter of events and internal announcements quickly developed into a wider source of news about CERN....

  10. Workstations as consoles for the CERN-PS complex, setting-up the environment

    International Nuclear Information System (INIS)

    Antonsanti, P.; Arruat, M.; Bouche, J.M.; Cons, L.; Deloose, Y.; Di Maio, F.

    1992-01-01

    Within the framework of the rejuvenation project of the CERN control systems, commercial workstations have to replace existing home-designed operator consoles. RISC-based workstations with UNIX, X-window TM and OSF/Motif TM have been introduced for the control of the PS complex. The first versions of general functionalities like synoptic display, program selection and control panels have been implemented and the first large scale application has been realized. This paper describes the different components of the workstation environment for the implementation of the applications. The focus is on the set of tools which have been used, developed or integrated, and on how we plan to make them evolve. (author)

  11. CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

    CERN Multimedia

    1969-01-01

    CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

  12. CERN's PS Booster LLRF renovation : plans and initial beam tests

    CERN Document Server

    Angoletta, ME; Butterworth, A; Findlay, A; Leinonen, PM; Molendijk, JC; Pedersen, F; Sanchez-Quesada, J; Schokker, M

    2010-01-01

    In 2008 a project was started to renovate the CERN's PS Booster (PSB) low-level RF (LLRF). Required LLRF capabilities include frequency program, beam phase, radial and synchronization loops. The new LLRF will control the signals feeding the three RF cavities present in each ring; it will also shape the beam in a dual harmonic mode, operate a bunch splitting and create a longitudinal blow-up. The main benefits of this new LLRF are its full remote and cycle-to-cycle controllability, built-in observation capability and flexibility. The overall aim is to improve the robustness, maintainability and reliability of the PSB operation and to make it compatible with the injection from the future Linac4. This paper outlines the main characteristics of the software and hardware building blocks. Initial beam test results and hints on the main milestones and future work are also given.

  13. Upgraded DIRAC spectrometer at CERN PS for the investigation of pi pi and pi K atoms

    Czech Academy of Sciences Publication Activity Database

    Adeva, B.; Benelli, A.; Čechák, T.; Doškářová, P.; Hons, Zdeněk; Klusoň, J.; Lednický, Richard; Martinčík, J.; Průša, P.; Smolík, J.; Trojek, T.; Urban, T.; Vrba, T.

    2016-01-01

    Roč. 839, DEC (2016), s. 52-85 ISSN 0168-9002 R&D Projects: GA MŠk(CZ) LG13031 Institutional support: RVO:61389005 ; RVO:68378271 Keywords : upgraded DIRAC spectrometer * CERN PS * pi pi and pi K atoms * Life-time measurement * long-lived excited states of pi pi atoms Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders; BF - Elementary Particles and High Energy Physics (FZU-D) Impact factor: 1.362, year: 2016

  14. Experiments at CERN in 1981

    International Nuclear Information System (INIS)

    1981-08-01

    This report contains the preliminary abstracts of the current experiments at the CERN SPS synchrotron, the anti p colliding beams, the CERN ISR, the CERN PS synchrotron, and the CERN synchrocyclotron. See hints under the relevant topics. (HSI)

  15. Control protocol: large scale implementation at the CERN PS complex - a first assessment

    International Nuclear Information System (INIS)

    Abie, H.; Benincasa, G.; Coudert, G.; Davydenko, Y.; Dehavay, C.; Gavaggio, R.; Gelato, G.; Heinze, W.; Legras, M.; Lustig, H.; Merard, L.; Pearson, T.; Strubin, P.; Tedesco, J.

    1994-01-01

    The Control Protocol is a model-based, uniform access procedure from a control system to accelerator equipment. It was proposed at CERN about 5 years ago and prototypes were developed in the following years. More recently, this procedure has been finalized and implemented at a large scale in the PS Complex. More than 300 pieces of equipment are now using this protocol in normal operation and another 300 are under implementation. These include power converters, vacuum systems, beam instrumentation devices, RF equipment, etc. This paper describes how the single general procedure is applied to the different kinds of equipment. The advantages obtained are also discussed. ((orig.))

  16. New Control Structure of the 10 MHz RF System in the CERN PS

    CERN Document Server

    Damerau, H

    2013-01-01

    The 10MHz cavities comprise the main RF system in the CERN PS and the only one that allows acceleration. In total 11 tunable cavities (10 operational and a hot spare, grouped into 3+1 tuning groups and up to presently 6 voltage program groups) are distributed all around the circumference of the PS ring. Next to the RF drive signal each of the cavities is controlled by a voltage program and timing pulses to open and close the relays to short-circuit the cavity gaps. These control signals are presently generated by a dedicated hardware matrix. It translates voltage functions and relay timing pulses per cavity group into functions and timings per cavity. However, due to its central position in the RF beam control system, the dedicated hardware matrix can cause significant downtime in case of a major hardware failure. Instead of upgrading the existing obsolete hardware, this note suggests a replacement by standard controls hardware and dedicated application software. Thanks to advanced software concepts like “M...

  17. Sharing resources@CERN

    CERN Multimedia

    2002-01-01

    The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Until now many people were unaware that copies of the same book (or standard, or journal) are often held not only by the library but by different divisions. (Here Eduardo Aldaz, from the PS division, and Isabel Bejar, from the ST division, read their divisional copies of the same book.) The idea behind the library's new sharing resources@CERN' initiative is not at all to collect the books in individual collections at the CERN library, but simply to register them in the Library database. Those not belonging to the library will in principle be unavailable for loan, but should be able to be consulted by anybody at CERN who is interested. "When you need a book urgently and it is not available in the library,' said PS Division engineer Eduardo Aldaz Carroll, it is a sham...

  18. Trapped modes in a dummy extraction septum for CERN Proton Synchrotron

    International Nuclear Information System (INIS)

    Persichelli, S.

    2014-01-01

    The term trapped mode is usually referred to a mode that can not propagate in the beam pipe, but is localized in a particular region inside the device, producing narrow resonances peaks in the coupling impedance. They can be excited by the presence of discontinuities inside different devices of an accelerator, producing unwanted beam instabilities. It is therefore important to identify trapped modes, especially for new elements to be installed in a high-intensity accelerator. We present a recent study of the coupling impedance due to trapped modes in a new extraction septum that will be installed in the CERN Proton Synchrotron in the framework of PS Multi-turn extraction (MTE) commissioning. Simulation and theoretical calculations were performed in order to understand performance limitations of the machine, to find cures to reduce the instabilities, and to evaluate beam-induced heating.

  19. The Proton Beams for the New Time-of-Flight Neutron Facility at the CERN-PS

    CERN Document Server

    Cappi, R; Métral, G

    2000-01-01

    The experimental determination of neutron cross sections in fission and capture reactions as a function of the neutron energy is of primary importance in nuclear physics. Recent developments at CERN and elsewhere have shown that many fields of research and development, such as the design of Accelerator-Driven Systems (ADS) for nuclear waste incineration, nuclear astrophysics, fundamental nuclear physics, dosimetry for radiological protection and therapy, would benefit from a better knowledge of neutron cross sections. A neutron facility at the CERN-PS has been proposed with the aim of carrying out a systematic and high resolution study of neutron cross sections through Time-Of-Flight (n-TOF) measurement. The facility requires a high intensity proton beam (about 0.7x1013 particles/bunch) distributed in a short bunch (about 25 ns total length) to produce the neutrons by means of a spallation process in a lead target. To achieve these characteristics, a number of complex beam gymnastics have to be performed. All...

  20. PERFORMANCE ANALYSIS OF MULTI-TURN EXTRACTION FROM THE PROTON SYNCHROTRON TO THE SUPER PROTON SYNCHROTRON

    CERN Document Server

    Abernethy, Samuel

    2016-01-01

    Within CERN's accelerator complex, the extraction from the Proton Synchrotron to the Super Proton Synchrotron has been done using the so-called ``Continuous Transfer" (CT) method since the 1970's. A new technique, known as Multi-Turn Extraction (MTE), has now been implemented and is in full operation. This report examines a holistic performance analysis of the novel technique in multiple aspects of the accelerator complex, as well as a direct comparison with its predecessor, CT, from the implementation of MTE in 2010 until the end of 2015.

  1. CMS Centre at CERN

    CERN Multimedia

    2007-01-01

    A new "CMS Centre" is being established on the CERN Meyrin site by the CMS collaboration. It will be a focal point for communications, where physicists will work together on data quality monitoring, detector calibration, offline analysis of physics events, and CMS computing operations. Construction of the CMS Centre begins in the historic Proton Synchrotron (PS) control room. The historic Proton Synchrotron (PS) control room, Opened by Niels Bohr in 1960, will be reused by CMS to built its control centre. TThe LHC@FNAL Centre, in operation at Fermilab in the US, will work very closely with the CMS Centre, as well as the CERN Control Centre. (Photo Fermilab)The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Contro...

  2. A Directory Service for the CERN PS/SL Java Programming Interface

    International Nuclear Information System (INIS)

    Cuperus, J.; Charrue, P.; DiMaio, F.; Kostro, K.; Watson, W.

    1999-01-01

    The CERN PS and SL accelerator control groups developed a common application programming interface (API) in Java [1]. Part of this API is a directory service that provide information about the underlying hardware and software. With this information, it is possible to write generic programs that do general actions on lists of devices without hard coding of device names. And, starting from a device name, full details about related devices, the device itself and its class and properties, can be obtained, including the meaning of bits and bit-patterns in status words. The interface definition is independent of any implementation but a reference implementation is provided using Java Database Connectivity (JDBC) against a set of tables in a relational database. Data from very different systems can be brought together and presented in a uniform way to the user. The full potential of the directory service is reached when it is used in software components (Java Beans)

  3. Production of strange particles in antineutrino interactions at the CERN PS

    CERN Document Server

    Erriquez, O; Bisi, V; Bonetti, S; Bonneaud, G; Bullock, F W; Cavalli, D; Escoubés, B; Fogli-Muciaccia, M T; Franzinetti, Carlo; Gamba, D; Guyonnet, J L; Halsteinslid, A; Huss, D; Jarlskog, C; Jones, T W; Marzari-Chiesa, A; Michette, A G; Myklebost, K; Natali, S; Nuzzo, S; Paty, M; Pullia, A; Racca, C; Riccati, L; Riester, J L; Rognebakke, A; Rollier, M; Romero, A; Sacco, R; Schäffer, M; Skjeggestad, O; Tvedt, B

    1978-01-01

    The authors have studied neutral strange particle production in the bubble chamber Gargamelle filled with propane and exposed to antineutrinos from the CERN PS. Cross sections are presented for Lambda , Sigma /sup 0/ and K/sup 0/ production. Associated production reactions ( Delta S=0) have been observed in the charged and the neutral current channels. From 45 candidates for the quasi-elastic reaction nu p to mu /sup +/ Lambda , on bound and free protons, estimates of the axial transition form factor M/sub A/ have been made using the total cross section and the t distribution. The weighted average from the two methods is M/sub A/=862+or-190 MeV. From a subsample of 15 candidates for nu interactions on free protons in propane, with (28+or-6)% background from nu interactions on bound protons, M/sub A/=883+or-243 MeV is obtained. The polarization of the Lambda hyperons has been studied for the quasi-elastic reaction. (11 refs).

  4. Prospect for Charge Current Neutrino Interactions Measurements at the CERN-PS

    CERN Document Server

    Bernardini, P; Bozza, C; Brugnera, R; Cecchetti, A; Cecchini, S; Collazuol, G; Corso, F Dal; De Mitri, I; De Serio, M; Di Ferdinando, D; Dore, U; Dusini, S; Fabbricatore, P; Fanin, C; Fini, R A; Garfagnini, A; Grella, G; Kose, U; Laveder, M; Loverre, P; Longhin, A; Marsella, G; Mancarella, G; Mandrioli, G; Mauri, N; Medinaceli, E; Mezzetto, M; Muciaccia, M T; Orecchini, D; Paoloni, A; Pastore, A; Patrizii, L; Pozzato, M; Rescigno, R; Rosa, G; Simone, S; Sioli, M; Sirri, G; Spurio, M; Stanco, L; Stellacci, S; Surdo, A; Tenti, M; Togo, V

    2011-01-01

    Tensions in several phenomenological models grew with experimental results on neutrino/antineutrino oscillations at Short-Baseline (SBL) and with the recent, carefully recomputed, antineutrino fluxes from nuclear reactors. At a refurbished SBL CERN-PS facility an experiment aimed to address the open issues has been proposed [1], based on the technology of imaging in ultra-pure cryogenic Liquid Argon (LAr). Motivated by this scenario a detailed study of the physics case was performed. We tackled specific physics models and we optimized the neutrino beam through a full simulation. Experimental aspects not fully covered by the LAr detection, i.e. the measurements of the lepton charge on event-by-event basis and their energy over a wide range, were also investigated. Indeed the muon leptons from Charged Current (CC) (anti-)neutrino interactions play an important role in disentangling different phenomenological scenarios provided their charge state is determined. Also, the study of muon appearance/disappearance ca...

  5. Sharing resources@CERN

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Photo 01: L. to r. Eduardo Aldaz, from the PS division, Corrado Pettenati, Head Librarian, and Isabel Bejar, from the ST division, read their divisional copies of the same book.

  6. Status of the SPL at CERN

    CERN Document Server

    Garoby, R

    2007-01-01

    The construction of the Large Hadron Collider at CERN is in its final phase, and commissioning with beam is scheduled to begin before the end of 2007. It is now time to prepare for increasing as much as possible the performance of this unique instrument to maximize the benefits for physics. An essential part of the proposed luminosity upgrade plan is the replacement of the CERN PS and its injectors by a 50 GeV proton synchrotron (PS2) and a 4 GeV superconducting linac (SPL). The design of the SPL has recently been updated and the optimization of its high-energy part will continue until ~2010. For the foreseen luminosity upgrade of the LHC a low-power version of the SPL (LP-SPL) is under study, which can be upgraded to a multi-megawatt machine providing beam to high-power proton users such as neutrino facilities and/or radio-active beam facilities. The construction start of the low-energy normal conducting SPL front-end, the 160 MeV "Linac4", is scheduled for January 2008, with the goal of being operational as...

  7. Engineering a large application software project: the controls of the CERN PS accelerator complex

    International Nuclear Information System (INIS)

    Benincasa, G.P.; Daneels, A.; Heymans, P.; Serre, Ch.

    1985-01-01

    The CERN PS accelerator complex has been progressively converted to full computer controls without interrupting its full-time operation (more than 6000 hours per year with on average not more than 1% of the total down-time due to controls). The application software amounts to 120 man-years and 450'000 instructions: it compares with other large software projects, also outside the accelerator world: e.g. Skylab's ground support software. This paper outlines the application software structure which takes into account technical requirements and constraints (resulting from the complexity of the process and its operation) and economical and managerial ones. It presents the engineering and management techniques used to promote implementation, testing and commissioning within budget, manpower and time constraints and concludes with experience gained

  8. A New High-intensity Proton Irradiation Facility at the CERN PS East Area

    CERN Document Server

    Gkotse, B; Lima, P; Matli, E; Moll, M; Ravotti, F

    2014-01-01

    and IRRAD2), were heavily and successfully used for irradiation of particle detectors, electronic components and materials since 1992. These facilities operated with particle bursts - protons with momentum of 24GeV/c - delivered from the PS accelerator in “spills” of about 400ms (slow extraction). With the increasing demand of irradiation experiments, these facilities suffered from a number of restrictions such as the space availability, the maximum achievable particle flux and several access constraints. In the framework of the AIDA project, an upgrade of these facilities has been realized during the CERN long shutdown (LS1). While the new proton facility (IRRAD) will continue to be mainly devoted to the radiation hardness studies for the High Energy Physics (HEP) experimental community, the new mixed-field facility (CHARM) will mainly host irradiation experiments for the validation of electronic systems used in a...

  9. MERIT - The high intensity liquid mercury target experiment at the CERN PS

    CERN Document Server

    Efthymiopoulos, I

    2009-01-01

    The MERIT experiment is a proof-of-principle test of a target system for high power proton beams to be used as front-end for a Neutrino Factory complex or a Muon Collider. The experiment took data in autumn 2007 with the fast extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of about 30 × 1012 protons per pulse. The target system, based on a free mercury jet, allowed investigation of the interseption of a 4-MW proton beam inside a 15-T magnetic field required to capture the low-energy secondary pions as the source of the required intense muon beams. Particle detectors have been installed around the target setup to measure the secondary particle flux out of the target and probe cavitation effects in the mercury jet when exited with a beam of variable intensity. With the analysis of the data ongoing, results will be presented here that demonstrate the validity of the liquid target concept.

  10. Where students turn into teachers: the eighth Inverted CERN School of Computing

    CERN Multimedia

    2015-01-01

    For the eighth time since 2005, the CERN School of Computing (CSC) has organised its inverted school, which will take place at CERN on 23 and 24 February 2015, in the IT Auditorium (Room 31/3-004).   The idea for inverted CSCs stemmed from the observation that at regular CSCs it is common to find students in the room who know more on a particular (advanced) topic than the lecturer. So why not try and exploit this and turn the students into teachers? CSC2014 students made proposals via an electronic discussion forum, from which a programme was designed. This year’s programme focuses on challenging and innovative topics, including: the evolution of processor architectures, the growing complexity of CPUs and its impact on the software landscape, exploring clustering and data processing, the importance of message passing in high-performance computing, the development of applications across heterogeneous systems. There will be also lectures on applied computing used in the simulation of lon...

  11. New safety training for access to the PS complex areas

    CERN Multimedia

    2012-01-01

    Since 10/08/2012, a new course dedicated to the specific radiological risks in the accelerators of the PS complex has been available on SIR (https://sir.cern.ch/). This course complements the general classroom-based Radiation Safety training. Successful completion of the course will be obligatory and verified by the access system as from 01/11/2012 for access to the following accelerator areas: LINAC2, BOOSTER, PS and TT2. Information and reminder e-mails will be sent to all persons currently authorized to access the accelerators of the PS complex. For questions please contact the HSE unit and in particular, the Radiation Protection Group (+41227672504 or safety-rp-ps-complex@cern.ch).

  12. Dump and Current Measurement of Unstripped H`ions at the Injection from the CERN LINAC4 Into the PS Booster

    CERN Document Server

    Chamizo, R; Goddard, B; Mereghetti, A; Versaci, R; Weterings, W

    2010-01-01

    Linac4 is the new H- linear accelerator under construction at CERN aiming to double the brightness of the beam injected to the CERN PS Booster (PSB) for delivering proton beams to experiments or further CERN accelerators, down to the LHC. The injection system in the PSB is based on the H- charge exchange where the 160 MeV H- beam is converted into an H+ beam by stripping the electrons with a carbon foil. A beam dump located inside a pulsed magnet for the injection bump will intercept the unstripped ions (H0 and H-) and measure the collected charge to detect the relative efficiency and degradation of the stripping foil. The challenge of the dump design is to meet the requirements of a beam dump providing a current measurement and at the same time minimizing the perturbation of the magnetic field of the surrounding pulsed magnet. This paper describes all phases of the dump design and the main issues related to its integration in the line.

  13. A High Resolution Spallation Driven Facility at the CERN-PS to Measure Neutron Cross Sections in the Interval from 1 eV to 250 MeV a Relative Performance Assessment

    CERN Document Server

    Rubbia, Carlo; Bouvet-Bensimon, D; Buono, S; Cappi, R; Cennini, P; Gelès, C; Goulas, I; Kadi, Y; Pavlopoulos, P; Revol, Jean Pierre Charles; Tzima, A; Vlachoudis, V

    1998-01-01

    In the proposed facility with 24 GeV PS beam on a Lead target, the number of produced neutrons exceeds 760 per proton. In comparison, with a LINAC (GELINA) one currently obtains only about 0.05 neutrons per electron of about 100 MeV. An additional factor of 2.5 for the CERN facility is due to the strong, forward peaking of the neutron flux, arising from the high proton energy and corresponding longitudinal boost. This huge factor in neutron yield per incident particle, namely 2.5 x 760/0.05 = 3.8 x 10^4, is only partially off-set by the higher, time averaged current of the LINAC e.g. 100 mA vs . 2 mA of the CERN-PS. Therefore the useful, initial neutron rate at the CERN facility is about three orders of magnitude larger than in the most performing electron LINAC’s, GELINA in Belgium and ORELLA in the US. The time duration of the PS pulse is presently Deltat|_r.m.s.=13.5 ns and we believe it could be reduced to Deltat|_r.m.s.= 6.75 ns. The electron LINAC has much shorter pulses Deltat| _r.m.s.= 1 ns, to which...

  14. Where students turn into teachers: the sixth Inverted CERN School of Computing

    CERN Multimedia

    François Fluckiger, CSC Director

    2013-01-01

    For the sixth time since 2005, the CERN School of Commuting has scheduled its inverted school for February. iCSCs are part of the CSC series of events, together with the main summer school to be held this year in Cyprus and the thematic school in Split next June.   The inverted CSC, iCSC2013, will take place at CERN on 25 and 26 February, in Room 513-1-024. The inverted CSCs stem from the observation that at regular CSCs it is common to find someone in the room who knows more on a particular (usually advanced) topic than the lecturer. So why not try and exploit this and turn the students into teachers? CSC2012 students made proposals via an electronic discussion forum, from which a programme was designed. This year’s programme focuses on timely, challenging and innovative topics, inlcuding: GPU computing in High Energy Physics, Computer vision, Testing in large scale distributed systems and Grid Interpretation by LHC experiments. Attendanc...

  15. Where students turn into teachers: the seventh Inverted CERN School of Computing

    CERN Multimedia

    Alberto Pace, CSC Director

    2014-01-01

    For the seventh time since 2005, the CERN School of Computing (see here) has scheduled its inverted school for February. iCSCs are part of the CSC series of events, together with the main summer school to be held this year in Portugal and the thematic school (see here) in Split next June.   The inverted CSC, iCSC2014, will take place at CERN on 24 and 25 February, in Room 31/3-004. The inverted CSCs stem from the observation that at regular CSCs it is common to find someone in the room who knows more on a particular (usually advanced) topic than the lecturer. So why not try and exploit this and turn the students into teachers? CSC2013 students made proposals via an electronic discussion forum, from which a programme was designed. This year’s programme focuses on timely, challenging and innovative topics, including: network programming, building distributed systems, a journey from quark to jet in physics, read-out electronics: where data come from, machine learning and data mining. At...

  16. Injection septa position and angle optimisation in view of the 2 GeV liu upgrade of the CERN PS

    CERN Document Server

    Serluca, HM; Forte, V; Fraser, M; Sterbini, G

    2017-01-01

    In the framework of the LHC Injector Upgrade (LIU)project the CERN PS injection kinetic energy will be up-graded from 1.4 to 2 GeV. The injection equipment, whichis already operating close to its limit, is being redesigned tocope with 30% increase in the beam rigidity. In this paper wepresent the experimental results from Machine Development(MD) studies on the present septum to explore its operationalhardware limits with respect to aperture restrictions, beamlosses and kick strengths in view of the LIU upgrade

  17. Stabilizing effect of a double-harmonic RF system in the CERN PS

    International Nuclear Information System (INIS)

    Bhat, C.; Caspers, F.; Damerau, H.; Hancock, S.; Mahner, E.; Zimmermann, F.

    2009-01-01

    Motivated by the discussions on scenarios for LHC upgrades, beam studies on the stability of flat bunches in a double-harmonic RF system have been conducted in the CERN Proton Synchrotron (PS). Injecting nearly nominal LHC beam intensity per cycle, 18 bunches are accelerated on harmonic h = 21 to 26GeV with the 10MHz RF system. On the flat-top, all bunches are then transformed to flat bunches by adiabatically adding RF voltage at h = 42 from a 20 MHz cavity in anti-phase to the h = 21 system. The voltage ratio V (h42)/V (h21) of about 0.5 was set according to simulations. For the next 140 ms, longitudinal profiles show stable bunches in the double-harmonic RF bucket until extraction. Without the second harmonic component, coupled-bunch oscillations are observed. The flatness of the bunches along the batch is analyzed as a measure of the relative phase error between the RF systems due to beam loading. The results of beam dynamics simulations and their comparison with the measured data are presented

  18. Academic Training Lecture Regular Programme: Physics at the AD/PS/SPS

    CERN Multimedia

    2012-01-01

    Physics at the AD/PS/SPS (1/4), by Lau Gatignon (CERN).   Monday, June 18, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 222-R-001 - Filtration Plant )   Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.   More information here.  

  19. Operation Statistics of the CERN Accelerators Complex for 2003

    CERN Document Server

    CERN. Geneva; Baird, S A; Rey, A; Steerenberg, R; CERN. Geneva. AB Department

    2004-01-01

    This report gives an overview of the performance of the different Accelerators (Linacs, PS Booster, PS, AD and SPS) of the CERN Accelerator Complex for 2003. It includes scheduled activities, beam availabilities, beam intensities and an analysis of faults and breakdowns by system and by beam. MORE INFORATION by using the OP Statistics Tool: http://eLogbook.web.cern.ch/eLogbook/statistics.php and on the SPS HomePage: http://ab-div-op-sps.web.cern.ch/ab-div-op-sps/SPSss.html

  20. Preparation of the beam for PS-MTE at the PSB

    CERN Document Server

    Chanel, M; CERN. Geneva. BE Department

    2009-01-01

    The Multi-Turn Extraction(MTE)1 at the PS requires, from the PSB, a beam(up to 6.5 1012 protons/ring) with a large horizontal emittance to better produce the five beamlets and a vertical emittance as small as possible. The ways to produce this beam and adjust the parameters are described in this note.

  1. SAFETY: STRICTER CONTROLS IN CONTROLLED AREAS IN THE PS

    CERN Multimedia

    G. Daems

    2001-01-01

    The PS accelerators will soon stop for several months. Work will take place in controlled areas in the PS and will involve many people who are not always aware of the risks associated with the work sites. To guarentee the safety of these workers, the following two measures will be applied: everyone working in a controlled zone - Linacs, PSB, and PS machines tunnels, and transfer lines - must wear, visibly, his CERN access card and his film badge. the CERN access card and the film badge will only be issued after following a basic safety course. Regular checks will be carried out during the shutdown. Anyone without these two items on their person will be obliged to leave the area immediately.

  2. Machine-learned Identification of RR Lyrae Stars from Sparse, Multi-band Data: The PS1 Sample

    Science.gov (United States)

    Sesar, Branimir; Hernitschek, Nina; Mitrović, Sandra; Ivezić, Željko; Rix, Hans-Walter; Cohen, Judith G.; Bernard, Edouard J.; Grebel, Eva K.; Martin, Nicolas F.; Schlafly, Edward F.; Burgett, William S.; Draper, Peter W.; Flewelling, Heather; Kaiser, Nick; Kudritzki, Rolf P.; Magnier, Eugene A.; Metcalfe, Nigel; Tonry, John L.; Waters, Christopher

    2017-05-01

    RR Lyrae stars may be the best practical tracers of Galactic halo (sub-)structure and kinematics. The PanSTARRS1 (PS1) 3π survey offers multi-band, multi-epoch, precise photometry across much of the sky, but a robust identification of RR Lyrae stars in this data set poses a challenge, given PS1's sparse, asynchronous multi-band light curves (≲ 12 epochs in each of five bands, taken over a 4.5 year period). We present a novel template fitting technique that uses well-defined and physically motivated multi-band light curves of RR Lyrae stars, and demonstrate that we get accurate period estimates, precise to 2 s in > 80 % of cases. We augment these light-curve fits with other features from photometric time-series and provide them to progressively more detailed machine-learned classification models. From these models, we are able to select the widest (three-fourths of the sky) and deepest (reaching 120 kpc) sample of RR Lyrae stars to date. The PS1 sample of ˜45,000 RRab stars is pure (90%) and complete (80% at 80 kpc) at high galactic latitudes. It also provides distances that are precise to 3%, measured with newly derived period-luminosity relations for optical/near-infrared PS1 bands. With the addition of proper motions from Gaia and radial velocity measurements from multi-object spectroscopic surveys, we expect the PS1 sample of RR Lyrae stars to become the premier source for studying the structure, kinematics, and the gravitational potential of the Galactic halo. The techniques presented in this study should translate well to other sparse, multi-band data sets, such as those produced by the Dark Energy Survey and the upcoming Large Synoptic Survey Telescope Galactic plane sub-survey.

  3. BL4S, or how CERN sets the stage for teenage scientists

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    Launched in 2014, the Beamline for Schools (BL4S) competition allows high-school students between 16 and 18 years old to run a real experiment at CERN’s PS accelerator (see here). For two years, students and schools worldwide have risen to the challenge and taken part enthusiastically in the competition. To ensure that it runs smoothly and enjoyably, over 100 CERN people work behind the scenes. The Bulletin lifts the curtain.   Student teams from Greece and the Netherlands – the winners of CERN’s first Beamline for schools competition – came to CERN to work on their experiments using a test beam. Turning young high-school students into real physicists who use a high-energy beam, set up an experiment and deal with data acquisition and analysis, is no game. For the people at CERN, the first step is to select the best proposals from those received from schools worldwide. “In 2015, over 40 scientists helped us select the best proposa...

  4. The new heart of the PS is beating strongly

    CERN Multimedia

    Corinne Pralavorio

    2011-01-01

    The PS has resumed operation with a brand new electrical power system called POPS; this enormous system comprising power electronics and capacitors is crucial because if it broke down practically no particles would be able to circulate at CERN. As soon as it started, POPS passed all the tests with flying colours and is now pulsing at full power.   The new PS power system is made up of 6 containers, each with 60 tonnes of capacitors and 8 power converters. The date 11/02/11 will always be remembered with affection by the engineers in the Electrical Power Converters Group. At 11:11 in the morning (no joke), the first beams powered by the new system began to circulate in the PS. The cutely-named POPS (POwer for PS) took over from the old rotating machine that had been working since 1968. From now on it will be POPS that supplies the PS main magnets with the electrical pulses needed to accelerate the beams for the LHC and all CERN's other facilities. The system is crucial as the PS is one of the lyn...

  5. The MERIT High-Power Target Experiment at the CERN PS

    CERN Document Server

    McDonald, K T; Park, H; Tsang, T; Efthymiopoulos, I; Fabich, A; Haug, F; Lettry, J; Palm, M; Pereira, H; Mokhov, N; Striganov, S; Carroll, A J; Graves, V B; Spampinato, P T; Bennett, J R J; Caretta, O; Loveridge, P

    2010-01-01

    The MERIT (MER­cury In­tense Tar­get) ex­per­i­ment was run in the fall of 2007 using 14 and 24 GeV in­tense pro­ton beams from the CERN PS. It is a proof-of-prin­ci­ple ex­per­i­ment de­signed to val­i­date a tar­get con­cept for pro­duc­ing an in­tense muon source for a fu­ture muon col­lid­er or neu­tri­no fac­to­ry. The ex­per­i­ment suc­cess­ful­ly demon­strat­ed a tar­get tech­nique for mul­ti-MW pro­ton beams that uti­lizes a free-flow­ing liq­uid metal jet with­in the con­fines of a high-field solenoid. We de­scribe the ex­per­i­men­tal strat­e­gy and pa­ram­e­ters, as well as the re­sults ob­tained and their im­pli­ca­tions for fu­ture muon-based ac­cel­er­a­tor fa­cil­i­ties.

  6. New Control Structure of the 200 MHz RF System in the CERN PS

    CERN Document Server

    Damerau, H; CERN. Geneva. AB Department

    2008-01-01

    The 200 MHz RF system is an essential tool for the preparation of high-intensity beams in the CERN PS. Presently, six RF cavities are operated to control the longitudinal bunch emittance and rebunching of the beam before the transfer to the SPS. Cavities are selected for the various processes with a dedicated hardware matrix, switching the individual timing pulses and voltage programs per cavity. However, the electronics used for the matrix hardware is obsolete and its reliability cannot be guaranteed due to a lack of spare modules and components. Instead of replacing the old hardware matrix by modern hardware, this note describes a new control structure for the 200MHz RF system so that no dedicated hardware will be required anymore. The implementation of the new control structure is based on two main concepts. Firstly, linked timing trees per blow-up or rebunching are used to handle all related timing and to store one row of the matrix. Secondly, as a reflection of the RF signal generation for the 200 MHz sy...

  7. The Merit(nTOF-11) High Intensity Liquid Mercury Target Experiment at the CERN PS

    CERN Document Server

    Efthymiopoulos, I; Caretta, O; Carroll, A J; Fabich, A; Graves, V B; Grudiev, A; Haug, F; Kirk, H G; Lettry, Jacques; Loveridge, P; McDonald, K T; Mokhov, N; Palm, M; Park, H; Pernegger, H; Spampinato, P T; Steerenberg, R; Striganov, S; Tsang, T

    2008-01-01

    The MERIT(nTOF-11) experiment is a proof-ofprinciple test of a target system for a high power proton beam to be used as front-end for a neutrino factory or a muon collider. The experiment took data in autumn 2007 with the fast-extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of $30 × 10^{12}$ per pulse. The target system, based on a free mercury jet, is capable of intercepting a 4-MW proton beam inside a 15-T magnetic field required to capture the low energy secondary pions as the source for intense muon beams. Partice detectors installed around the target setup measure the secondary particle flux out of the target and can probe cavitation effects in the mercury jet when excited by an intense proton beam.Preliminary results of the data analysis will be presented here.

  8. Multi-platform SCADA GUI Regression Testing at CERN

    CERN Document Server

    Burkimsher, P C; Klikovits, S

    2011-01-01

    The JCOP Framework is a toolkit used widely at CERN for the development of industrial control systems in several domains (i.e. experiments, accelerators and technical infrastructure). The software development started 10 years ago and there is now a large base of production systems running it. For the success of the project, it was essential to formalize and automate the quality assurance process. This paper will present the overall testing strategy and will describe in detail mechanisms used for GUI testing. The choice of a commercial tool (Squish) and the architectural features making it appropriate for our multi-platform environment will be described. Practical difficulties encountered when using the tool in the CERN context are discussed as well as how these were addressed. In the light of initial experience, the test code itself has been recently reworked in object-oriented style to facilitate future maintenance and extension. The current reporting process is described, as well as future plans for easy re...

  9. Inauguration of POPS: the new power system of the PS

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    Pictures 03 and 04 : The team from the Electrical Power Converters Group (TE/EPC) is joined by the Director of Accelerators, the heads of the BE, TE and FI departments, CERN managers and Converteam representatives in a group portrait in front of three of the containers that house the capacitor banks of the PS's new power supply system, POPS. Pictures 01, 06 and 07 : Magid-Michel Saikaly, energy and infrastructure director at Converteam, receives a prize from Steve Myers, Director of Accelerators at CERN, for the development and fabrication of the new electrical power system for the PS, called POPS.

  10. CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

    CERN Multimedia

    1979-01-01

    CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

  11. Septum magnet MNP-23 for the CERN PS experimental area and its fast interlock system

    CERN Document Server

    Borburgh, J; Prost, A; Zickler, T

    2004-01-01

    Two MNP-23 septum-like magnets are installed at CERN in the transfer line from the Proton Synchrotron (PS) to the East Hall Experimental Area. They are exposed to extremely high doses of ionizing radiation. In the past, the magnets experienced two catastrophic failures due to overheating of its coils and cannot be repaired. The magnets of improved design which is subject of this article are built as replacements for the magnets presently installed. The MNP-23 is a resistive C shaped iron-dominated magnet made of solid low carbon steel blocks. The excitation windings consist of two water-cooled coils wound from hollow copper conductor. The septum design of these magnets implies a high current density which requires an efficient water cooling system. The newly designed cooling circuit provides better cooling performance and more reliability. To avoid failures due to coil overheating, an elaborate interlock system was developed and installed. It consists of two parts: firstly a slow, more classic sensor, to dete...

  12. The PS Booster, PS and SPS Magnets for the next 25 years

    CERN Document Server

    Tommasini, D

    2010-01-01

    This note provides information and analysis on the present status of the magnets installed in the CERN Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS) in view of their possible operation for the next 25 years. The note does not cover the magnets installed in the transfer lines, neither it covers the fast injection/extraction magnets (septa and kickers).

  13. CERN Cricket Club

    CERN Document Server

    CERN Cricket Club

    2018-01-01

    The CERN Cricket Club 2018 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 12th, at 18.00!  The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/cricket/ or turn up for net practice, which takes place each Thursday evening (apart from CERN official holidays) until the end of September (starting at 18:00 to around 20:00) at the CERN Prévessin site: http://cern.ch/cricket/CERN-Ground.html The first matches will be in the Geneva T20 competition on Saturday and Sunday, April 14th / 15th. 

  14. Physics at the AD/PS/SPS (1/4)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.

  15. Sitting into the limelight: Lonely Chairs at CERN turns one

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    A picture may be worth a thousand words - but a picture of a chair? It’s worth a story all by itself. Over the past year, the "Lonely Chairs at CERN" photography blog has let the chairs do the talking. Along the way, these chairs have inspired and enchanted people across the globe with their honest depiction of the Laboratory.   This lonely chair outside Building 32 was one of the first Rebeca photographed. When CMS physicist Rebeca Gonzalez Suarez created Lonely Chairs at CERN back in April 2014, she was not expecting the immediate reaction it garnered. Within days, the blog had picked up thousands of followers and was featured in Gizmodo and The Guardian. "The response inside CERN was very positive, but the response outside was overwhelming," says Rebeca. "I’ve got a lot of followers who are really into science and are very excited about CERN. They comment about wanting to work here - sometimes on the ugliest chair I&rsqu...

  16. CERN Cricket club

    CERN Multimedia

    CERN Cricket club

    2015-01-01

    The CERN Cricket Club 2015 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 16th, at 18:00! The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/ or turn up for net practice, which takes place each Thursday evening from April 16th (apart from CERN official holidays) until the end of September (starting at 18:00 to around 19:30) at the CERN Prévessin site: http://club-cricket.web.cern.ch/Club-Cricket/CERN-Ground.html The first match will be at home on Sunday, April 19th against Rhone CC from Lyon.

  17. ESO: The CERN Years

    CERN Multimedia

    Schaeffer, A

    2012-01-01

    In 1970, CERN and ESO signed a collaboration agreement for the construction of the Observatory’s first telescope. That same year, ESO’s Telescope Division and Sky Atlas laboratory settled on the CERN site in Meyrin. Let’s turn back to the beginnings of this lasting and fruitful alliance.

  18. A great start for the whole CERN accelerator chain

    CERN Multimedia

    2016-01-01

    With physics data-taking under way this week at the LHC, I’d like to take a look at what’s been happening at the rest of the CERN accelerator chain.   The LHC tends to dominate the news from CERN for all kinds of reasons, beech martens included, but we should not forget that there is a unique chain of accelerators upstream of the LHC, tended to and operated by an incredible group of people. If our whole accelerator chain does not work perfectly, nor can the LHC, and in addition to forming the LHC’s injector chain, our upstream accelerators support their own experiments, bringing great diversity to the CERN research programme. The chain begins with the proton source and Linac2, which have been faithfully delivering beams since 1978. This year, Linac2 accelerated its first beams on 29 February. Beams were then passed on to the PS Booster and the veteran PS, the linchpin of the CERN accelerator complex and in operation since 1959. The final link in the chain before the ...

  19. Golden Jubilee photos: CERN gets a second Laboratory

    CERN Multimedia

    2004-01-01

    CERN's first large accelerator, the Proton Synchrotron (PS), had hardly come into operation at the beginning of the 1960s, when physicists started to dream of a machine ten times more powerful, operating at 300 Gigaelectronvolts. The construction of such an accelerator required a new laboratory to be built and several European sites were candidates. John Adams, the project leader, suggested using the PS as an injector for the new machine, to achieve the higher energy level at a lower cost. The new Laboratory was therefore to be built on a site adjacent to CERN. The project was approved in 1971, but the CERN Convention, which only provided for a single laboratory, had to be amended. An agreement was signed with France on 16 June 1972 (see photograph), establishing a new site at Prévessin, in the Pays de Gex. The two laboratories, which each had their own administrative structures and Directors-General, were merged in 1976.

  20. PS proton source

    CERN Multimedia

    1959-01-01

    The first proton source used at CERN's Proton Synchrotron (PS) which started operation in 1959. This is CERN's oldest accelerator still functioning today (2018). It is part of the accelerator chain that supplies proton beams to the Large Hadron Collider. The source is a Thonemann type. In order to extract and accelerate the protons at high energy, a high frequency electrical field is used (140Mhz). The field is transmitted by a coil around a discharge tube in order to maintain the gas hydrogen in an ionised state. An electrical field pulse, in the order of 15kV, is then applied via an impulse transformer between anode and cathode of the discharge tube. The electrons and protons of the plasma formed in the ionised gas in the tube, are then separated. Currents in the order of 200mA during 100 microseconds have benn obtained with this type of source.

  1. CERN Heavy-Ion Facility design report

    International Nuclear Information System (INIS)

    Warner, D.; Angert, N.; Bourgarel, M.P.; Brouzet, E.; Cappi, R.; Dekkers, D.; Evans, J.; Gelato, G.; Haseroth, H.; Hill, C.E.; Hutter, G.; Knott, J.; Kugler, H.; Lombardi, A.; Lustig, H.; Malwitz, E.; Nitsch, F.; Parisi, G.; Pisent, A.; Raich, U.; Ratzinger, U.; Riccati, L.; Schempp, A.; Schindl, K.; Schoenauer, H.; Tetu, P.; Umstaetter, H.H.; Rooij, M. van; Weiss, M.

    1993-01-01

    The design of the CERN Heavy-Ion Facility is described. This facility will be based on a new ion linear accelerator (Linac 3), together with improvements to the other accelerators of the CERN complex to allow them to cope with heavy ions, i.e. to the Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS). For this reference design, the pure isotope of lead, 208 Pb, is considered. The bulk of the report describes Linac 3, a purpose-built heavy-ion linac mainly designed and constructed in collaboration with several CERN member state laboratories, but also with contributions from non-member states. Modifications and improvements to existing CERN accelerators essentially concern the RF acceleration, beam control and beam monitoring (all machines), beam kickers and septa at the input and output of the PSB, and major vacuum improvements, aiming to reduce the pressure by factors of at least seven and three in the PSB and PS respectively. After injection from the Electron Cyclotron Resonance source at 2.5 keV/u the partially stripped heavy-ion beam is accelerated successively by a Radio Frequency Quadrupole and an Interdigital-H linac to 4.2 MeV/u. After stripping to 208 Pb 53+ , the beam is again accelerated, firstly in the PSB (to 98.5 MeV/u), then in the PS (to 4.25 GeV/u). The final stage of acceleration in the SPS takes the fully stripped 208 Pb 82+ ions to 177 GeV/u, delivering a beam of 4.10 8 ions per SPS supercycle (15.2 s) to the experiments. The first physics run with lead ions is scheduled for the end of 1994. Finally, some requirements for carrying out heavy-ion physics at the Large Hadron Collider are mentioned. (orig.)

  2. CERN Technical Training 2003: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    AXEL-2003 - Introduction to Particle Accelerators AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures wil...

  3. CERN Technical Training 2003: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    AXEL-2003  -  Introduction to Particle Accelerators   AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectur...

  4. Electron-cloud simulation studies for the CERN-PS in the framework of the LHC Injectors Upgrade project

    CERN Document Server

    Rioja Fuentelsaz, Sergio

    The present study aims to provide a consistent picture of the electron cloud effect in the CERN Proton Synchrotron (PS) and to investigate possible future limitations due to the requirements foreseen by the LHC Injectors Upgrade (LIU) project. It consists of a complete simulation survey of the electron cloud build-up in the different beam pipe sections of the ring depending on several controllable beam parameters and vacuum chamber surface properties, covering present and future operation parameters. As the combined function magnets of the accelerator constitute almost the $80\\%$ in length of the ring, the implementation of a new feature for the simulation of any external magnetic field on the PyECLOUD code, made it possible to perform this study. All the results of the simulations are given as a function of the vacuum chamber surface properties in order to deduce them, both locally and globally, when compared with experimental data. In a first step, we characterize locally the maximum possible number of ...

  5. CERN Central Library : 2000 year old technology transfer. Two fragments of columns from a Roman building discovered during excavations for the PS in 1956 have prominent places in the Library where they can be enjoyed by all

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    CERN Central Library : 2000 year old technology transfer. Two fragments of columns from a Roman building discovered during excavations for the PS in 1956 have prominent places in the Library where they can be enjoyed by all

  6. Aerial view of CERN under the snow

    CERN Multimedia

    CERN PhotoLab

    1963-01-01

    In this photograph taken in the winter of 1963, CERN still looks quite bare under its mantle of snow. The Proton Synchrotron (PS), resembling a bicycle wheel in shape, had been in operation since the summer of 1959. A proposal had just been made for the site of CERN's second large project, the Intersecting Storage Rings (ISR): France was to house the world's first proton-proton collider. In September 1965, the French authorities signed an agreement making more than 40 hectares of land available for the extension of the CERN site established in Switzerland into French territory. The ISR project received final approval from the CERN Council in December 1965. The civil engineering work on the French part began in November 196

  7. CERN 50th Anniversary : CERN's 50th anniversary celebrations drew to a close with a ceremony at Geneva University's Institut de Physique.

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For it was here, on the banks of the River Arve, that CERN's first staff members, from the PS Magnets Group, came to work in October 1953. A commemorative plaque was inaugurated by Robert Aymar, CERN's Director-General, Charles Beer, State Councillor for the Canton of Geneva responsible for the Department of Public Education, and André Hurst, Rector of the University (Picture 01)

  8. LS1 Report: PS beams are back!

    CERN Multimedia

    Katarina Anthony & Anaïs Schaeffer

    2014-01-01

    For the first time in over 15 months, there are beams back in the PS. Making their first tour of the accelerator today, 20 June, their injection marks the end of weeks of cold checkouts and hardware commissioning in the PS.   The CERN Control Centre (CCC) is back in business: people gather to restart the LHC injectors, today the PS. Since hardware commissioning was wrapped up on 23 May, the Operations Group (BE-OP) has been conducting cold checkouts on the PS. This involves switching on all of the machine's systems, verifying that they respond to commands by OP and ensuring they are calibrated to beam timings. "These verifications were done, in part, during the hardware commissioning dry runs," says Rende Steerenberg, PS section leader. "But the cold checkouts are on a much larger scale, as we act as if there is beam in the whole machine. We placed a full load on the controls system, cooling, networks, etc. in order to setup the accelerator in the most realis...

  9. The PS will soon be back in operation

    CERN Multimedia

    2006-01-01

    The PS's power supply system is undergoing repairs for the accelerator to restart on 26 June. The AB Department's Power Converter Group is working flat out with Siemens to return the PS's power supply system to working order. A problem appeared on the insulation of the power cables of the rotor of the rotating machine (photo) which supplies power to the PS magnets. To prevent more significant damage to the rotating machine, the AB Department, with the approval of the CERN Management, decided to shut down the PS which had started running on 15 May. Everything is being done to restart the accelerator on 26 June. The PS's rotating machine comprises a motor coupled to a generator. The generator's rotor acts like a flywheel, supplying high-power pulses of 40 to 50 megawatts to the PS magnets. The 6 megawatt motor drives the installation at 1000 revolutions per minute and compensates only for variations in speed. It is an essential interface since it would be hard to imagine connecting such an electrical charge, p...

  10. CERN, the US and the W

    CERN Document Server

    Crease, Robert P

    2004-01-01

    In 1983, CERN physicists discovered the W boson earning them the first Nobel prize. This discovery served as the turning point for CERN from the point of view of the self-confidence of its physicists, the confidence of its fund-raisers, and its reputation in the US. However, this feat did not come as easy for CERN. Rivalry with the US revealed complexities. Nevertheless in the end, CERN physicists became the more successful. Recognizing this, US physicists agreed to collaborate with CERN physicists. Today, there is no more political competition over accelerators between the two groups. (Edited abstract).

  11. Cross-talk of a multi-anode PMT and attainment of a σ∼10ps TOF counter

    International Nuclear Information System (INIS)

    Enari, Y.; Hayasaka, K.; Hokuue, T.; Inami, K.; Ohshima, T.; Sato, N.; Akatsu, M.; Kawakami, S.; Miyabayashi, Y.; Tokuda, H.; Yanase, H.; Shimoi, H.; Fujimori, T.

    2005-01-01

    We extensively studied a cross-talk phenomenon that seriously deteriorates the high time-resolution of a multi-anode 16-channel linear array photo-multiplier tube (PMT); the dynode structures were modified to eliminate the cross-talk effect and to recover a time resolution of σ=70-80ps for single photons. The use of 16 anode signals of the modified PMT enabled us to attain σ=12ps for a small TOF counter of Cherenkov radiation

  12. Upgraded DIRAC spectrometer at CERN PS for the investigation of ππ and πK atoms

    Energy Technology Data Exchange (ETDEWEB)

    Adeva, B. [Santiago de Compostela University (Spain); Afanasyev, L. [JINR, Dubna (Russian Federation); Allkofer, Y. [Zurich University (Switzerland); Amsler, C. [Albert Einstein Centre for Fundamental Physics, Laboratory of High Energy Physics, Bern (Switzerland); Anania, A. [INFN, Sezione di Trieste and Messina University, Messina (Italy); Aogaki, S. [IFIN-HH, National Institute for Physics and Nuclear Engineering, Bucharest (Romania); Benelli, A. [Czech Technical University in Prague (Czech Republic); Brekhovskikh, V. [IHEP, Protvino (Russian Federation); Caragheorgheopol, Gh. [IFIN-HH, National Institute for Physics and Nuclear Engineering, Bucharest (Romania); Cechak, T. [Czech Technical University in Prague (Czech Republic); Chiba, M. [Tokyo Metropolitan University (Japan); Chliapnikov, P. [IHEP, Protvino (Russian Federation); Ciocarlan, C.; Constantinescu, S. [IFIN-HH, National Institute for Physics and Nuclear Engineering, Bucharest (Romania); Detraz, C. [CERN, Geneva (Switzerland); Doskarova, P. [Czech Technical University in Prague (Czech Republic); Drijard, D. [CERN, Geneva (Switzerland); Dudarev, A. [JINR, Dubna (Russian Federation); Duma, M.; Dumitriu, D. [IFIN-HH, National Institute for Physics and Nuclear Engineering, Bucharest (Romania); and others

    2016-12-11

    The DIRAC spectrometer installed at CERN PS was upgraded in order to study simultaneously A{sub 2π} and A{sub πK} atoms, namely the bound states of two π mesons, and of π and K mesons, respectively. The detector system can now accept a high intensity beam of 2–6×10{sup 11} primary protons per second. The electronics and the data-acquisition system can handle a very large amount of data to identify π, K, p, e and µ, allowing the selection of ππ and πK pairs in the offline analysis. The resolution of the longitudinal and transverse components of the relative momentum Q of each meson pair in their center-of-mass system with respect to the direction of the pair was substantially improved. The analysis of their distributions allowed an reliable separation between the meson pairs originating from hadronic atoms and the backgrounds permitting the measurement of the lifetimes of hadronic atoms in the ground state and π–π, π–K s-wave scattering lengths. The upgraded setup also allowed the study of the long-lived excited states of ππ atoms.

  13. Neutrinos at CERN

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    CERN's long and distinguished neutrino tradition began in 1958 at the then new 500 MeV synchrocyclotron (SC) with the first observation of the decay of a charged pion into an electron and a neutrino. At that time, the first ideas on the special (vector/axial vector) structure of the weak interactions had been put forward by Feynman and Gell-Mann and by Marshak and Sudarshan, but the continual non-observation of that charged pion decay was holding up progress. This decay is only one part in ten thousand, and is masked by the dominant muon-neutrino channel. A special telescope was built to pick up the high energy electrons from the pion decay. In 1962 came another SC neutrino success, with the first measurement of the decay of a charged pion into a neutral one, with emission of an electron and a neutrino. Meanwhile the main thrust of CERN's neutrino effort was taking shape at the PS. By the close of 1960, CERN had decided to attack neutrino physics using several detectors - a 1m heavy liquid bubble chamber from Andre Lagarrigue's team in Paris, a CERN 1 m heavy liquid bubble chamber, and a hybrid chamber/counter from a group led by Helmut Faissner

  14. CERN back to its roots

    CERN Multimedia

    2004-01-01

    History came full circle on Saturday 23 October, when CERN's 50th anniversary celebrations drew to a close with a ceremony at Geneva University's Institut de Physique. For it was here, on the banks of the River Arve, that CERN's first staff members, from the PS Magnets Group, came to work in October 1953. Since that day, there has not been a break in the collaboration between CERN and the Institut de Physique de Genève. "We cooperate very closely in the fields of experimental and theoretical particle physics, of course, but also in applied and materials physics," says Alain Blondel, Professor at Geneva University (ATLAS member and neutrino factory promoter) and organiser of the ceremony. "For instance, the Physics Section has just developed a superconducting magnet capable of reaching a continuous magnetic field of 21.3 Tesla, which is of great interest to CERN." The ceremony, interspersed with "cosmic" musical interludes, was an opportunity to recall this partnership that is more than fifty years old. A c...

  15. Optimization of machining parameters of turning operations based on multi performance criteria

    Directory of Open Access Journals (Sweden)

    N.K.Mandal

    2013-01-01

    Full Text Available The selection of optimum machining parameters plays a significant role to ensure quality of product, to reduce the manufacturing cost and to increase productivity in computer controlled manufacturing process. For many years, multi-objective optimization of turning based on inherent complexity of process is a competitive engineering issue. This study investigates multi-response optimization of turning process for an optimal parametric combination to yield the minimum power consumption, surface roughness and frequency of tool vibration using a combination of a Grey relational analysis (GRA. Confirmation test is conducted for the optimal machining parameters to validate the test result. Various turning parameters, such as spindle speed, feed and depth of cut are considered. Experiments are designed and conducted based on full factorial design of experiment.

  16. Implications for supersymmetry of the CERN monojets

    International Nuclear Information System (INIS)

    Haber, H.E.

    1985-01-01

    Results of a comprehensive study of supersymmetric processes which could give monojet events similar to those observed at the CERN Sp anti pS are presented. If supersymmetry is to be the explanation of the monojets, strict bounds are obtained on possible supersymmetric masses. 15 references

  17. Measurements and FLUKA simulations of bismuth and aluminium activation at the CERN Shielding Benchmark Facility (CSBF)

    Science.gov (United States)

    Iliopoulou, E.; Bamidis, P.; Brugger, M.; Froeschl, R.; Infantino, A.; Kajimoto, T.; Nakao, N.; Roesler, S.; Sanami, T.; Siountas, A.

    2018-03-01

    The CERN High Energy AcceleRator Mixed field facility (CHARM) is located in the CERN Proton Synchrotron (PS) East Experimental Area. The facility receives a pulsed proton beam from the CERN PS with a beam momentum of 24 GeV/c with 5 ṡ1011 protons per pulse with a pulse length of 350 ms and with a maximum average beam intensity of 6.7 ṡ1010 p/s that then impacts on the CHARM target. The shielding of the CHARM facility also includes the CERN Shielding Benchmark Facility (CSBF) situated laterally above the target. This facility consists of 80 cm of cast iron and 360 cm of concrete with barite concrete in some places. Activation samples of bismuth and aluminium were placed in the CSBF and in the CHARM access corridor in July 2015. Monte Carlo simulations with the FLUKA code have been performed to estimate the specific production yields for these samples. The results estimated by FLUKA Monte Carlo simulations are compared to activation measurements of these samples. The comparison between FLUKA simulations and the measured values from γ-spectrometry gives an agreement better than a factor of 2.

  18. CERN: LHC magnets

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1992-08-15

    With test magnets for CERN's LHC proton-proton collider regularly attaining field strengths which show that 10 Tesla is not forbidden territory, attention turns to why and where quenches happen. If 'training' can be reduced, superconducting magnets become easier to commission.

  19. Speed of light exceeded in 31st CERN Relay

    CERN Multimedia

    2001-01-01

    In the closest-ever finish of the CERN relay race, Florian Marinet (number 54) of the Neutrinos to Gran Sasso team just fails to catch Pierre Maesen of The Shabbys on the line. The AThLetic AceS team (number 76) won the Veterans category by just 3 seconds from long-time participants The Lynx Runners, who didn't leave empty handed. They picked up the cup that is drawn at random. Evidence for new physics? No, simply evidence for faster legs. Only at CERN could the speed of light come third to a team called The Shabbys. But that's exactly what happened on Wednesday 23 May when the team from PS Division lifted the Opitz cup after winning the 31st CERN relay race. The Shabbys sped home in 10 minutes 53 seconds, just 0.3 of a second ahead of the 'Neutrinos to Gran Sasso' team. There's some logic there since it is the PS complex that will provide the protons that will give rise to the neutrino beam. As for 'c0 the speed of light', they took a relatively leisurely 11 minutes 1.6 seconds to cover the course. A total...

  20. Nouvelle application de control des cavités 200 MHz RF du PS (CERN)

    CERN Document Server

    Cotte, D

    2011-01-01

    Le système Radio Fréquence (RF) 200MHz du PS est un outil essentiel pour la préparation des faisceaux haute intensité du PS. Dans l’anneau PS on trouve 6 cavités 200 MHz utilisées pour contrôler : • l’émittance longitudinale des « bunches » • le processus de « Rebunching » du faisceau avant de l’envoyer au SPS. Chaque cavité est pilotée par des événements appelés « timing » et suit une fonction de tension programmée. Cependant, l’électronique utilisée pour piloter les cavités 200 MHz du PS est obsolète et sa fiabilité non garantie pour cause du manque de pièces de rechange. Ce document décrit le fonctionnement du nouveau programme d’application qui fait abstraction de l’ancienne matrice hardware. Elle suit les recommandations décrites dans l’étude d’une nouvelle structure pour le système RF 200MHz du PS. [1

  1. CERN: LHC magnets

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    With test magnets for CERN's LHC proton-proton collider regularly attaining field strengths which show that 10 Tesla is not forbidden territory, attention turns to why and where quenches happen. If 'training' can be reduced, superconducting magnets become easier to commission

  2. Multi objective large power system planning under sever loading condition using learning DE-APSO-PS strategy

    International Nuclear Information System (INIS)

    Mahdad, Belkacem; Srairi, K.

    2014-01-01

    Highlights: • An efficient planning strategy using DE and APSO in coordination with PS algorithm is proposed. • An interactive process is proposed to balance the exploitation and exploration capability of (DE-APSO) and PS. • Fuel cost, power loss, and voltage deviation considering loading condition are optimized. • The proposed strategy (DE-APSO-PS) is validated on three large practical test systems. - Abstract: This paper introduces an efficient planning strategy using new hybrid interactive differential evolution (DE), adaptive particle swarm optimization (APSO), and pattern search (PS) for solving the security optimal power flow (SOPF) considering multi distributed static VAR compensator (SVC). Three objective functions such as fuel cost, power loss and voltage deviation are considered and optimized considering sever loading conditions. The main idea of the proposed strategy is that variable controls are optimized based on superposition mechanism, the best solutions evaluated by DE and APSO at specified stages are communicated to PS to exploit new regions around this solution, alternatively the new solution achieved by PS is also communicated to DE and APSO, this interactive mechanism search between global and local search is to balance the exploitation and exploration capability which allows individuals from different methods to react more by learning and changing experiences. The robustness of the proposed strategy is tested and validated on large practical power system test (IEEE 118-Bus, IEEE 300-Bus, and 40 units). Comparison results with the standard global optimization methods such as DE, APSO PS and to other recent techniques showed the superiority and perspective of the proposed hybrid technique for solving practical power system problems

  3. submitter Direct Drive and Eddy Current Septa Magnet Designs for CERN's PSB Extraction at 2 GeV

    CERN Document Server

    Szoke, Z; Balhan, B; Baud, C; Borburgh, J; Hourican, M; Masson, T; Prost, A

    2016-01-01

    In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster (PSB) extraction and PS injection. The upgraded devices are to deal with the increased beam energy from 1.4 to 2 GeV at extraction of the PSB. The direct drive recombination septa in the PSB transfer line to the PS and the eddy current PS injection septum together with a bumper at injection have been investigated using finite-element software. For the recombination magnets, an increase in magnet length is sufficient to obtain the required deflection; however, for the PS injection elements, a more novel solution is necessary to also achieve increased robustness to extend the expected lifetime of the pulsed device. The injection septum will share the same vacuum vessel with an injection bumper, and both magnets will be located adjacent to each other. The new PS injection magnet will be the first septum operated at CERN based on eddy current technology. The magnetic modeling of the devices, the comparison of the p...

  4. Experiments at CERN in 1984

    International Nuclear Information System (INIS)

    1984-11-01

    This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The Intersecting Storage Rings (ISR) have ceased functioning early this year. The four approved experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. (orig./HSI)

  5. Two members of the CERN personnel receive the 2002 Accelerator Prize

    CERN Multimedia

    2002-01-01

    Kurt H bner and Frank Zimmermann have been awarded the 2002 Accelerator Prize by the Interdivisional Group on Accelerators of the European Physical Society (EPS-IGA).   Kurt H bner Frank Zimmermann Kurt H bner is well known to CERN, as he was Director of Accelerators from 1994 to 2001, after having been PS Division Leader. A member of the CERN personnel since 1966, Kurt H bner, who is of Austrian nationality, has taken part in the design and operation of many accelerators including the PS, the ISR and LEP. He has received the award for his major contributions to accelerator physics and for his excellent leadership in this field. In its citation, the Prize Selection Committee stated that «he has provided guidance for generations of accelerator physicists and engineers, thereby contributing immensely to the prosperity of accelerators at CERN and many other laboratories around the world.» Frank Zimmermann has been awarded the prize for an individual in the early part of his or her career who has made a rece...

  6. High Intensity Beam Issues in the CERN Proton Synchrotron

    CERN Document Server

    Aumon, Sandra; Rivkin, Leonid

    This PhD work is about limitations of high intensity proton beams observed in the CERN Proton Synchrotron (PS) and, in particular, about issues at injection and transition energies. With its 53 years, the CERN PS would have to operate beyond the limit of its performance to match the future requirements. Beam instabilities driven by transverse impedance and aperture restrictions are important issues for the operation and for the High-Luminosity LHC upgrade which foresees an intensity increase delivered by the injectors. The main subject of the thesis concerns the study of a fast transverse instability occurring at transition energy. The proton beams crossing this energy range are particularly sensitive to wake forces because of the slow synchrotron motion. This instability can cause a strong vertical emittance blow-up and severe losses in less than a synchrotron period. Experimental observations show that the particles at the peak density of the beam longitudinal distribution oscillate in the vertical plane du...

  7. Effects of Specific Multi-Nutrient Enriched Diets on Cerebral Metabolism, Cognition and Neuropathology in AβPPswe-PS1dE9 Mice

    Science.gov (United States)

    Jansen, Diane; Zerbi, Valerio; Arnoldussen, Ilse A. C.; Wiesmann, Maximilian; Rijpma, Anne; Fang, Xiaotian T.; Dederen, Pieter J.; Mutsaers, Martina P. C.; Broersen, Laus M.; Lütjohann, Dieter; Miller, Malgorzata; Joosten, Leo A. B.; Heerschap, Arend; Kiliaan, Amanda J.

    2013-01-01

    Recent studies have focused on the use of multi-nutrient dietary interventions in search of alternatives for the treatment and prevention of Alzheimer's disease (AD). In this study we investigated to which extent long-term consumption of two specific multi-nutrient diets can modulate AD-related etiopathogenic mechanisms and behavior in 11-12-month-old AβPPswe-PS1dE9 mice. Starting from 2 months of age, male AβPP-PS1 mice and wild-type littermates were fed either a control diet, the DHA+EPA+UMP (DEU) diet enriched with uridine monophosphate (UMP) and the omega-3 fatty acids docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA), or the Fortasyn® Connect (FC) diet enriched with the DEU diet plus phospholipids, choline, folic acid, vitamins and antioxidants. We performed behavioral testing, proton magnetic resonance spectroscopy, immunohistochemistry, biochemical analyses and quantitative real-time PCR to gain a better understanding of the potential mechanisms by which these multi-nutrient diets exert protective properties against AD. Our results show that both diets were equally effective in changing brain fatty acid and cholesterol profiles. However, the diets differentially affected AD-related pathologies and behavioral measures, suggesting that the effectiveness of specific nutrients may depend on the dietary context in which they are provided. The FC diet was more effective than the DEU diet in counteracting neurodegenerative aspects of AD and enhancing processes involved in neuronal maintenance and repair. Both diets elevated interleukin-1β mRNA levels in AβPP-PS1 and wild-type mice. The FC diet additionally restored neurogenesis in AβPP-PS1 mice, decreased hippocampal levels of unbound choline-containing compounds in wild-type and AβPP-PS1 animals, suggesting diminished membrane turnover, and decreased anxiety-related behavior in the open field behavior. In conclusion, the current data indicate that specific multi-nutrient diets can influence AD

  8. Effects of specific multi-nutrient enriched diets on cerebral metabolism, cognition and neuropathology in AβPPswe-PS1dE9 mice.

    Directory of Open Access Journals (Sweden)

    Diane Jansen

    Full Text Available Recent studies have focused on the use of multi-nutrient dietary interventions in search of alternatives for the treatment and prevention of Alzheimer's disease (AD. In this study we investigated to which extent long-term consumption of two specific multi-nutrient diets can modulate AD-related etiopathogenic mechanisms and behavior in 11-12-month-old AβPPswe-PS1dE9 mice. Starting from 2 months of age, male AβPP-PS1 mice and wild-type littermates were fed either a control diet, the DHA+EPA+UMP (DEU diet enriched with uridine monophosphate (UMP and the omega-3 fatty acids docosahexaenoic acid (DHA and eicosapentaenoic acid (EPA, or the Fortasyn® Connect (FC diet enriched with the DEU diet plus phospholipids, choline, folic acid, vitamins and antioxidants. We performed behavioral testing, proton magnetic resonance spectroscopy, immunohistochemistry, biochemical analyses and quantitative real-time PCR to gain a better understanding of the potential mechanisms by which these multi-nutrient diets exert protective properties against AD. Our results show that both diets were equally effective in changing brain fatty acid and cholesterol profiles. However, the diets differentially affected AD-related pathologies and behavioral measures, suggesting that the effectiveness of specific nutrients may depend on the dietary context in which they are provided. The FC diet was more effective than the DEU diet in counteracting neurodegenerative aspects of AD and enhancing processes involved in neuronal maintenance and repair. Both diets elevated interleukin-1β mRNA levels in AβPP-PS1 and wild-type mice. The FC diet additionally restored neurogenesis in AβPP-PS1 mice, decreased hippocampal levels of unbound choline-containing compounds in wild-type and AβPP-PS1 animals, suggesting diminished membrane turnover, and decreased anxiety-related behavior in the open field behavior. In conclusion, the current data indicate that specific multi-nutrient diets can

  9. CERN at 40

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1994-11-15

    CERN celebrated its 40th anniversary with a special family day on 17 September where the accent was on fun, games and entertainment for staff and their families. After a brief opening ceremony, pomp gave way to play, formality to frivolity. The following extracts from the DG's speech of welcome were freely translated from the French original: 'Forty is the traditional age for taking stock of the past and assessing future prospects. CERN is no exception to this rule and it is particularly appropriate at what is clearly a major turning point in its existence. Before looking to the future, allow me to say a few words about our past.

  10. The (7,7) optics at CERN PS

    CERN Document Server

    Serluca, M; Efthymiopoulos, I; Sperati, F; Sterbini, G; Tecker, F; Zisopoulos, P

    2017-01-01

    The PS lattice is composed by one hundred combinedfunction magnets, which set the bare tune of the machineto (Qh,Qv) = (6.25, 6.28). Low energy quadrupoles areused at injection to move the tune in a limited working pointarea. In particular the vertical tune is moved below 6.25 toavoid the structural resonance 8Qv= 50 coupled with spacecharge, which leads to strong losses. In view of the highdemands in terms of beam brightness for LIU and HL-LHCprojects, the interest of exploring different integer tune work-ing area started during last years. During 2016, for the firsttime, it has been possible to explore the (7,7) tune workingarea at injection using the auxiliary circuits of the combinedfunction magnets. A finite-element magnetic model, underdevelopment, has been used to predict the required currentsin order to get the desired optical parameters. In this pa-per we present the results and issues encountered duringthe Machine Development (MD) studies about the injectionin the (7,7) area along with optics and be...

  11. LINAC4, A New $H^{-}$ Linear Injector at CERN

    CERN Document Server

    Garoby, R; Hanke, K; Lombardi, A M; Rossi, C; Vretenar, M

    2004-01-01

    Linac2, the present injector of the CERN PS Booster, limits the performance of the proton accelerator complex because of its low output energy (50 MeV). To remove this bottleneck, a higher energy linac is proposed (called â€ワLinac4†) which will double the brightness and the intensity of the beam delivered by the PSB and ensure the â€ワultimate” beam is available for LHC. Linac4 will deliver H- ions at a kinetic energy of 160 MeV. It is designed to be usable as the front-end of a future multi-GeV multi-MW linear accelerator, the â€ワSuperconducting Proton Linac” (SPL). R&D for Linac4 is now actively taking place with the support of the European Union through the Joint Research Activity HIPPI (â€ワHigh Intensity Pulsed Proton Injectors”), and of three ISTC projects involving three major Russian laboratories (BINP, IHEP and ITEP) and two nuclear centres (VNIIEF and VNIITF). The design of this new accelerator and the on-going developments are described.

  12. PS Main Control Room (partial view)

    CERN Multimedia

    1974-01-01

    Jean-Pierre Potier (turning buttons) and Bertran Frammery (telephoning) on shift. The 26 GeV Synchrotron and later also its related machines (Linacs 1,2,3; PS-Booster; LEP-Injector Linacs and Electron-Positron Accumulator; Antiproton Accumulator, Antiproton Collector, Low Energy Antiproton Ring and more recently Antiproton Decelerator) were all controlled from the PS control room situated on the Meyrin site. The SPS and LEP were controlled from a separat control centre on the Prevessin site. In 2005 all controls were transferred to the Prevessin centre.

  13. POPS: the 60MW power converter for the PS accelerator: Control strategy and performances

    CERN Document Server

    Boattini, Fulvio; Skawinski, Gregory

    2015-01-01

    The main power supply of Proton-Synchrotron (PS) accelerator is one of the biggest at CERN. The old rotating machine system has been replaced with a new NPC based DC/DC power supply named POPS (Power system for PS main magnets) with capacitor banks as energy storage mean. POPS is in operation since February 2011. The operation of the PS accelerator requires a specific design of the control system with very high performance requirements in term of accuracy and precision. This paper describes the main lines of the control strategies analyzing the problems encountered and the solutions adopted. The performances of the converter are presented throughout the paper.

  14. CERN at 40

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    CERN celebrated its 40th anniversary with a special family day on 17 September where the accent was on fun, games and entertainment for staff and their families. After a brief opening ceremony, pomp gave way to play, formality to frivolity. The following extracts from the DG's speech of welcome were freely translated from the French original: 'Forty is the traditional age for taking stock of the past and assessing future prospects. CERN is no exception to this rule and it is particularly appropriate at what is clearly a major turning point in its existence. Before looking to the future, allow me to say a few words about our past

  15. Dalai Lama at CERN

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    On 30 August CERN turned aside from its usual day-to-day preoccupations when Director-General Herwig Schopper played host to the Dalai Lama of Tibet and his entourage during the holy man's 1983 visit to Europe. In welcoming his visitor, Professor Schopper stressed the role of particle physics in helping to understand man's place in the cosmos, and how the Dalai Lama's interest would further the interrelation of science, philosophy and religion. The Dalai Lama visited the UA 1 experiment (rolled back into its 'garage' during the present fixed target operations at CERN) and the large installations for the neutrino experiments in the West Area of the SPS machine. There was an intriguing exchange of views with CERN theorists, who described how science has continually modified our view of the world around us

  16. EDH 'Millionaire' in PS Division

    CERN Multimedia

    2001-01-01

    Christmas cheer! Left to right: Gerard Lobeau receives a bottle of Champagne from Derek Mathieson and Jurgen De Jonghe in recognition of EDH's millionth document. At 14:33 on Monday 3 December a technician in PS division, Gerard Lobeau, unwittingly became part of an important event in the life of CERN's Electronic Document Handling system (EDH). While ordering some pieces of aluminum for one of the PS's 10Mhz RF cavities, he created EDH document number 1,000,000. To celebrate the event Derek Mathieson (EDH Project Leader) and Jurgen De Jonghe (Original EDH Project Leader) presented Mr Lobeau with a bottle of champagne. As with 93% of material requests, Mr Lobeau's order was delivered within 24 hours. 'I usually never win anything' said Mr Lobeau as he accepted his prize, 'I initially though there may have been a problem with EDH when the document number had so many zeros in it, and was then surprised to get a phone call from you a few minutes later.' The EDH team had been monitoring the EDH document number ...

  17. A day in the CERN Control Centre

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    The CERN Control Centre (CCC) is the nerve centre of the CERN beam systems. From this room, the experts prepare, monitor, adjust, and control the particle beams that circulate throughout the accelerator complex while ensuring that the services and the technical infrastructure work flawlessly. Buttons, screens, telephones, lights (but no sound): in the CCC, everything is ready to make it possible for the LHC to reach the unprecedented energies expected at Run 2.   Seen from above, the CERN Control Centre resembles the shape of a quadrupole magnet. The consoles are distributed in four circles, called “islands”, dedicated to the LHC, the SPS, the PS Complex and the Technical Infrastructure (TI) respectively. Spread between TI and LHC are the Cryogenics consoles. Being in the same room allows the 24h-manned islands to be constantly in touch with one another, thus ensuring the best performance of the machines. At the LHC island, operators are currently busy training the magnet...

  18. Beam Quality Preservation in the CERN PS-SPS Complex

    CERN Multimedia

    Arduini, Gianluigi

    2004-01-01

    The LHC will require beams of unprecedented transverse and longitudinal brightness. Their production imposes tight constraints on the emittance growth in each element of the LHC injector chain, namely the PS-SPS Accelerator Complex. The problems encountered at the different stages of the acceleration in the complex span a wide range of topics, such as injection matching, RF gymnastics, space charge, transverse and longitudinal single- and coupled-bunch instabilities, and electron cloud effects. The measurement techniques developed and applied to identify and study the various sources of emittance dilution to the high precision required for the LHC beams and the solutions found to control such phenomena are illustrated.

  19. Delay-line cables for the fast bumpers in the PS.

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    For 'continuous transfer' to the SPS, the beam accelerated in the PS is shaved off over several turns, so as to form a continuous sequence of bunches several times the length of the PS circumference. Fast bumpers, powered in a 'staircase' way, displace the PS beam stepwise towards the ejection septum. Each step lasts 2.1 microsec and the cable drums in this picture contain some of the bumper delay-lines of altogether 10 km.

  20. Space charge studies in the PS

    CERN Document Server

    Asvesta, F; Damerau, H; Huschauer, A; Papaphilippou, Y; Serluca, M; Sterbini, G; Zisopoulos, P

    2017-01-01

    In this paper the results of Machine Development (MD)studies conducted at the CERN Proton Sychrotron (PS) arepresented. The main focus was the investigation of newworking points in an effort to characterize and potentiallyimprove the brightness for LHC-type beams in view of theLHC Injectors Upgrade (LIU). Various working points werecompared in terms of losses and emittance evolution. Sincespace charge and the resonances it excites are the main causefor emittance blow-up and losses, tunes close to excitedresonances were carefully studied. Mitigation techniques,such as bunch flattening using a double harmonic RF system,were also tested.

  1. Fermilab turns 50! Congratulations!

    CERN Multimedia

    Staff Association

    2017-01-01

    This year Fermilab turns 50 and the celebrations are ongoing. The ties between CERN and Fermilab are numerous and have been ranging from competition between two labs at the forefront of their field, e.g. with the chase of the top quark, finally discovered by Fermilab, to outright collaboration, e.g. on LHC low-beta quadrupole magnet development and production and in the CMS collaboration. In June, in the name of the CERN staff and scientific community, the CERN Staff Association sent a message to the Fermilab staff and scientific community, through Dr. Nigel Lockyer, Fermilab Director. The letter, and the assurance from Nigel Lockyer that the message has been passed onto the Fermilab community can be found on our website. Congratulations to Fermilab on its fiftieth Anniversary, and to the staff and collaborators who made this laboratory through their hard work, dedication and vision!

  2. Grey Relational Analyses for Multi-Objective Optimization of Turning S45C Carbon Steel

    International Nuclear Information System (INIS)

    Shah, A.H.A.; Azmi, A.I.; Khalil, A.N.M.

    2016-01-01

    The optimization of performance characteristics in turning process can be achieved through selection of proper machining parameters. It is well known that many researchers have successfully reported the optimization of single performance characteristic. Nevertheless, the multi-objective optimization can be difficult and challenging to be studied due to its complexity in analysis. This is because an improvement of one performance characteristic may lead to degradation of other performance characteristic. As a result, the study of multi-objective optimization in CNC turning of S45C carbon steel has been attempted in this paper through Taguchi and Grey Relational Analysis (GRA) method. Through this methodology, the multiple performance characteristics, namely; surface roughness, material removal rate (MRR), tool wear, and power consumption; can be optimized simultaneously. It appears from the experimental results that the multiple performance characteristics in CNC turning was achieved and improved through the methodology employed. (paper)

  3. A 40 MHz Bunch by Bunch Intensity Measurement for the CERN SPS and LHC

    CERN Document Server

    Jakob, H; Jones, R; Jensen, L

    2003-01-01

    A new acquisition system has been developed to allow the measurement of the individual intensity of each bunch in a 40MHz bunch train. Such a system will be used for the measurement of LHC type beams after extraction from the CERN-PS right through to the dump lines of the CERN-LHC. The method is based on integrating the analogue signal supplied by a Fast Beam Current Transformer at a frequency of 40MHz. This has been made possible with the use of a fast integration ASIC developed by the University of Clermont-Ferrand, France, for the LHC-b pre-shower detector. The output of the integrator is digitised using a 12-bit ADC and fed into a Digital Acquisition Board (DAB) that was originally developed by TRIUMF, Canada, for use in the LHC orbit system. A full system set-up was commissioned during 2002 in the CERN-SPS, and following its success will now be extended in 2003 to cover the PS to SPS transfer lines and the new TT40 LHC extraction channel.

  4. A comprehensive search for “anomalies” from neutrino and anti-neutrino oscillations at large mass differences (Δm^2 ~ 1eV^2) with two LAr–TPC imaging detectors at different distances from the CERN-PS.

    CERN Document Server

    Rubbia, C; Bagliani, D; Baibussinov, B; Bilokon, H; Boffelli, F; Bonesini, M; Calligarich, E; Canci, N; Centro, S; Cesana, A; Cieslik, K; Cline, D B; Cocco, A G; De Gerone, M; Dequal, D; Dermenev, A; Dolfini, R; Dussoni, S; Farnese, C; Fava, A; Ferrari, A; Fiorillo, G; Garvey, G T; Gatti, F; Gibin, D; Gigli Berzolari, A; Gninenko, S; Guber, F; Guglielmi, A; Haranczyk, M; Holeczek, J; Ivashkin, A; Kirsanov, M; Kisiel, J; Kochanek, I; Kurepin, A; Łagoda, J; Louis, W C; Lucchini, G; Mania, S; Mannocchi, G; Matveev, V; Menegolli, A; Meng, G; Mills, G B; Montanari, C; Otwinowski, S; Palczewski, T J; Perfetto, F; Periale, L; Picchi, P; Pietropaolo, F; Płoński, P; Rappoldi, A; Raselli, G L; Rossella, M; Sala, P; Scantamburlo, E; Scaramelli, A; Segreto, E; Sergiampietri, F; Suvorova, O; Stefan, D; Stepaniak, J; Sulej, R; Terrani, M; Testera, G; Tlisov, D; Trinchero, G; Van de Water, R G; Varanini, F; Ventura, S; Vignoli, C; Wang, H G; Yang, X; Zani, A; Zaremba, K

    2011-01-01

    The present proposal describes an experimental search of sterile neutrinos beyond the Standard Model with the CERN-PS beam and the innovative technology of imaging in ultra-pure cryogenic liquid Argon. The proposal is based on two strictly identical LAr-TPC detectors observing the electron-neutrino signal in the ”Far” and “Near” positions, the first one of about 600 tons placed 850 m the second one of about 150 tons at about 6.5 times shorter distance from the proton target. This project will exploit the ICARUS T600 — now running in the underground experiment CNGS2 with neutrinos from the CERN-SPS — moved from GranSasso to the CERN “Far” position. The additional T150 will be constructed and located in the “Near” position. In the two positions, the radial and energy spectra of the nu_e beam are practically identical. Comparing the two detectors, in absence of oscillations, all cross sections and experimental biases cancel out and the two experimentally observed event distributions must be ...

  5. CERN Technical Training 2003: Learning for the LHC! : AXEL-2003  -  Introduction to Particle Accelerators

    CERN Multimedia

    2003-01-01

    AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures will be recorded and available online via the Web Lectu...

  6. A 30 ps Timing Resolution for Single Photons with Multi-pixel Burle MCP-PMT

    Energy Technology Data Exchange (ETDEWEB)

    Va' vra, J.; Benitez, J.; Coleman, J.; Leith, D.W.G.S.; Mazaheri, G.; Ratcliff, B.; Schwiening, J.; /SLAC

    2006-07-05

    We have achieved {approx}30 psec single-photoelectron and {approx}12ps for multi-photoelectron timing resolution with a new 64 pixel Burle MCP-PMT with 10 micron microchannel holes. We have also demonstrated that this detector works in a magnetic field of 15kG, and achieved a single-photoelectron timing resolution of better than 60 psec. The study is relevant for a new focusing DIRC RICH detector for particle identification at future Colliders such as the super B-factory or ILC, and for future TOF techniques. This study shows that a highly pixilated MCP-PMT can deliver excellent timing resolution.

  7. Overview of the CERN Linac4 beam instrumentation

    CERN Document Server

    Roncarolo, F; Bravin, E; Dehning, B; Duraffourg, M; Gerard, D; Holzer, E B; Lenardon, F; Focker, G; Raich, U; Soby, L; Sordet, M; Tan, J; Tranquille, G; Vuitton, C; Zamantzas, C; Cheymol, B

    2010-01-01

    The CERN LINAC4 will represent the first upgrade of the LHC injection chain, by accelerating H- ions from 45 KeV to 160 MeV for charge-exchange injection into the PS Booster. In order to provide its safe and efficient commissioning and operation, a wide variety of beam diagnostics devices has been designed for installation at convenient locations all over the accelerator length and in the transfer line to the PS Booster. This paper gives an overview of all instrumentation devices, including those to measure beam position, transverse and longitudinal profile, beam current and beam loss. The well advanced status of the system design and the main instrument features are discussed

  8. Experiments at CERN in 1997

    International Nuclear Information System (INIS)

    1997-11-01

    This book summarises the current experimental programme at CERN. The experiments listed are taking place at one of the following machines: the Large Electron Positron Collider (LEP), the Super Proton Synchroton (SPS), the 28 GeV Proton Synchrotron (PS), including the Antiproton Decelerator (AD) for slow antiprotons and the ISOLDE facility for short-lived ions. The three experiments now approved for installation at the Large Hadron Collider (LHC) and the R and D projects aimed at the development of new detector technologies and data acquisition systems for the LHC experiments are also listed. (orig./WL)

  9. CERN honours Carlo Rubbia

    CERN Document Server

    2009-01-01

    Carlo Rubbia turned 75 on March 31, and CERN held a symposium to mark his birthday and pay tribute to his impressive contribution to both CERN and science. Carlo Rubbia, 4th from right, together with the speakers at the symposium.On 7 April CERN hosted a celebration marking Carlo Rubbia’s 75th birthday and 25 years since he was awarded the Nobel Prize for Physics. "Today we will celebrate 100 years of Carlo Rubbia" joked CERN’s Director-General, Rolf Heuer in his opening speech, "75 years of his age and 25 years of the Nobel Prize." Rubbia received the Nobel Prize along with Simon van der Meer for contributions to the discovery of the W and Z bosons, carriers of the weak interaction. During the symposium, which was held in the Main Auditorium, several eminent speakers gave lectures on areas of science to which Carlo Rubbia made decisive contributions. Among those who spoke were Michel Spiro, Director of the French National Insti...

  10. People and things. CERN Courier, Nov 1979, v. 19(8)

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    The article covers the celebration of the 'Journée du Personnel' (Staff Day), where over 3000 CERN staff turned up to enjoy various attractions like games, sports, sideshows, competitions, films, music and entertainment, and dancing that went on into the small hours. One highlight was the playing of 'Happy Birthday, CERN — From Fermi lab', recorded at Fermi lab. In other news, the article reports on various people, staff changes within the CERN organization and recent news updates

  11. People and things. CERN Courier, Nov 1979, v. 19(8)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1979-11-15

    The article covers the celebration of the 'Journée du Personnel' (Staff Day), where over 3000 CERN staff turned up to enjoy various attractions like games, sports, sideshows, competitions, films, music and entertainment, and dancing that went on into the small hours. One highlight was the playing of 'Happy Birthday, CERN — From Fermi lab', recorded at Fermi lab. In other news, the article reports on various people, staff changes within the CERN organization and recent news updates.

  12. Back to work for the PS

    CERN Multimedia

    2006-01-01

    On 22 June, the PS's rotating machine started turning again for the first time since its enforced shutdown one month ago (see Bulletin No. 23-24/2006) - and the PS was back in operation the very next day! A team from Siemens worked their socks off, 6 days a week for one month (including public holidays), to repair the electrical power supply in collaboration with the AB/PO Group's Main Power Converters (MPC) Section. The generator's faulty rotor was dismantled and replaced by the renovated spare rotor. The multitude of electrical and mechanical connections together with the sheer weight of the rotor (80 tonnes) made this an extremely complex job. The AB/PO Group used the shutdown to test a back-up solution for the PS power supply. The accelerator was directly wired up to the 18 kV electrical network via a 13 MVA transformer, installed at the end of the 1970s but never used. This solution succeeded in bringing the PS back into operation but at limited energy and frequency. Just 14 GeV could be achieved, whic...

  13. The LINAC4 Project at CERN

    CERN Document Server

    Arnaudon, L; Bertone, C; Body, Y; Broere, J; Brunner, O; Buzio, M; Carli, C; Caspers, F; Corso, JP; Coupard, J; Dallocchio, A; Dos Santos, N; Garoby, R; Gerigk, F; Hammouti, L; Hanke, K; Jones, M; Kozsar, I; Lettry, J; Lallement, JB; Lombardi, A; Lopez-Hernandez, LA; Maglioni, C; Mathot, S; Maury, S; Mikulec, B; Nisbet, D; Noels, C; Paoluzzi, M; Puccio, B; Raich, U; Ramberger, S; Rossi, C; Schwerg, N; Scrivens, R; Vandoni, G; Weisz, S; Vollaire, J; Vretenar, M; Zickler, T

    2011-01-01

    As the first step of a long-term programme aiming at an increase in the LHC luminosity, CERN is building a new 160 MeV H¯ linear accelerator, Linac4, to replace the ageing 50 MeV Linac2 as injector to the PS Booster (PSB). Linac4 is an 86-m long normal-conducting linac made of an H¯ source, a Radio Frequency Quadrupole (RFQ), a chopping line and a sequence of three accelerating structures: a Drift-Tube Linac (DTL), a Cell-Coupled DTL (CCDTL) and a Pi-Mode Structure (PIMS). The civil engineering has been recently completed, and construction of the main accelerator components has started with the support of a network of international collaborations. The low-energy section up to 3 MeV including a 3-m long 352 MHz RFQ entirely built at CERN is in the final construction phase and is being installed on a dedicated test stand. The present schedule foresees beam commissioning of the accelerator in the new tunnel in 2013/14; the moment of connection of the new linac to the CERN accelerator chain will depend on the L...

  14. Multi-turn multi-gap transmission line resonators - Concept, design and first implementation at 4.7T and 7T.

    Science.gov (United States)

    Frass-Kriegl, Roberta; Laistler, Elmar; Hosseinnezhadian, Sajad; Schmid, Albrecht Ingo; Moser, Ewald; Poirier-Quinot, Marie; Darrasse, Luc; Ginefri, Jean-Christophe

    2016-12-01

    A novel design scheme for monolithic transmission line resonators (TLRs) is presented - the multi-turn multi-gap TLR (MTMG-TLR) design. The MTMG-TLR design enables the construction of TLRs with multiple turns and multiple gaps. This presents an additional degree of freedom in tuning self-resonant TLRs, as their resonance frequency is fully determined by the coil geometry (e.g. diameter, number of turns, conductor width, etc.). The novel design is evaluated at 4.7T and 7T by simulations and experiments, where it is demonstrated that MTMG-TLRs can be used for MRI, and that the B 1 distribution of MTMG-TLRs strongly depends on the number and distribution of turns. A comparison to conventional loop coils revealed that the B 1 performance of MTMG-TLRs is comparable to a loop coil with the same mean diameter; however, lower 10g SAR values were found for MTMG-TLRs. The MTMG-TLR design is expected to bring most benefits at high static field, where it allows for independent size and frequency selection, which cannot be achieved with standard TLR design. However, it also enables more accurate geometric optimization at low static field. Thereby, the MTMG-TLR design preserves the intrinsic advantages of TLRs, i.e. mechanical flexibility, high SAR efficiency, mass production, and coil miniaturization. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  15. Design of LINAC4, A New Injector for the CERN Booster

    CERN Document Server

    Garoby, R; Lombardi, A M; Rossi, C; Vretenar, M; Gerigk, F

    2004-01-01

    A new H- linac (Linac4) is presently under study at CERN. This accelerator, based on normal conducting structures at 352 and 704 MHz, will provide a 30 mA 160 MeV H- beam to the CERN PS Booster (PSB), thus overcoming the present space-charge bottleneck at injection with a 50 MeV proton beam. Linac4 is conceived as the first stage of a future 2.2 GeV superconducting linac (SPL) and it is therefore designed for a higher duty cycle than necessary for the PSB. This paper discusses the design choices, presents the layout of the facility and illustrates the advantages for the LHC and other CERN users. The R&D and construction strategy, which mainly relies upon international collaborations, is also presented.

  16. A simple solvent blending coupled sonication technique for synthesis of polystyrene (PS/multi-walled carbon nanotube (MWCNT nanocomposites: Effect of modified MWCNT content

    Directory of Open Access Journals (Sweden)

    Payel Sen

    2016-09-01

    Full Text Available The influence of carboxylic acid functionalized multi-walled carbon nanotubes (cMWCNTs content on the properties of polystyrene (PS nanocomposite (NC films was investigated. The NC films were produced by a simple sonication assisted solvent blending technique. The interaction between the matrix (PS and well dispersed filler (cMWCNT was evaluated by different techniques involving Fourier transform infrared spectroscopy, Raman spectroscopy and X-Ray diffraction. Morphological images of the NCs were collected from Transmission electron microscopy. The thermal characteristics of the PS were found to be improved by the incorporation of the cMWCNTs, which was evident from the Thermogravimetric analysis (TGA data. The thermal degradation activation energy evaluated by Coats-Redfern method and integral procedural decomposition temperature determined by Doyle's method supported the thermal stability proposed by TGA of the NCs. The reaction mechanism of thermal degradation of neat PS and respective NCs was successfully predicted using Criado method. The rheological properties and hardness were found to be upgraded by the inclusion of nanotubes to the PS matrix.

  17. Your chance to shape internal communication at CERN

    CERN Multimedia

    Effective internal communication is essential to any organization, particularly one like CERN that is host to a large, varied and geographically widespread community. The CERN Bulletin has for many years been the mainstay of internal communication at the lab, bringing you news about all aspects of life at CERN. From the 1970s to just a few years ago, the Bulletin was a print-only publication, but it has since evolved with the times to embrace the web. Moving forward, we aim to broaden the Bulletin's reach and turn it into a genuine forum for discussion within the CERN community. One of the first steps in this process is for the CERN communication group to work with the Staff Association to develop a more inclusive form of internal communication, bringing together news from the Management with news from the Association, while also playing an important social role by providing a channel for the Association’s many clubs to reach out to everyone working at CERN. This integrated approach to communic...

  18. Information on antiprotonic atoms and the nuclear periphery from the PS209 experiment

    CERN Document Server

    Trzcinska, A.; Czosnyka, T.; von Egidy, T.; Gulda, K.; Hartmann, F.J.; Iwanicki, J.; Ketzer, B.; Kisielinski, M.; Klos, B.; Kurcewicz, W.; Lubinski, P.; Napiorkowski, P.J.; Pienkowski, L.; Schmidt, R.; Widmann, E.

    2001-01-01

    In the PS209 experiments at CERN two kinds of measurements were performed: the in-beam measurement of X-rays from antiprotonic atoms and the radiochemical, off-line determination of the yield of annihilation products with mass number A_t -1 (less by 1 than the target mass). Both methods give observables which allows to study the peripheral matter density composition and distribution.

  19. submitter Radiation Protection Studies for CERN LINAC4/SPL Accelerator Complex

    CERN Document Server

    Mauro, Egidio; Silari, Marco

    2009-01-01

    CERN is presently designing a new chain of accelerators to replace the present Proton Synchrotron (PS) complex: a 160 MeV room-temperature H$^-$ linac (Linac4) to replace the present 50 MeV proton linac injector, a 3.5 GeV Superconducting Proton Linac (SPL) to replace the 1.4 GeV PS booster (PSB) and a 50 GeV synchrotron (named PS2) to replace the 26 GeV PS. Linac4 has been funded and the civil engineering work started in October 2008, whilst the SPL is in an advanced stage of design. Beyond injecting into the future 50 GeV PS, the ultimate goal of the SPL is to generate a 4 MW beam for the production of intense neutrino beams. The radiation protection design is driven by the latter requirement. This thesis summarizes the radiation protection studies conducted for Linac4. FLUKA Monte Carlo simulations, complemented by analytical estimates, were performed 1) to evaluate the propagation of neutrons through the waveguide, ventilation and cable ducts placed along the accelerator, 2) to estimate the radiological i...

  20. CERN on the net

    CERN Multimedia

    2008-01-01

    As all eyes turn to the LHC in the run-up to the big switch-on, online media are providing a keyhole into the deepest corners of CERN. From YouTube to blogs, communicating ideas has never before had the capacity to reach so many people. A wide range of websites comment on CERN.Blogs, YouTube, social networking, podcasting, Twitter, SecondLife, Flickr…. it’s easy to get lost in the ever expanding world of Web 2.0. But it’s also hard to ignore the fact that these web facilities are becoming a central part of everyday life, whether it’s for finding information, sharing interests with friends, keeping up to date with news, or simply for entertainment. CERN’s profile on these sites is also increasing, but as with everything on the Internet there is a huge range in the quality of information available, stretching from officially endorsed sites all the way to the plain ridiculous! This is our guide to some of the best CERN conte...

  1. CERN Proton Synchrotron Complex High-Level Controls Renovation

    CERN Document Server

    Deghaye, S; Garcia Quintas, D; Gourber-Pace, M; Kruk, G; Kulikova, O; Lezhebokov, V; Pasinelli, S; Peryt, M; Roderick, C; Roux, E; Sobczak, M; Steerenberg, R; Wozniak, J; Zaharieva, Z

    2009-01-01

    After a detailed study of the Proton Synchrotron (PS) complex requirements by experts of CERN controls & operation groups, a proposal to develop a new system, called Injector Controls Architecture (InCA), was presented to and accepted by the management late 2007. Aiming at the homogenisation of the control systems across CERN accelerators, InCA is based on components developed for the Large Hadron Collider (LHC) but also new components required to fulfil operation needs. In 2008, the project was in its elaboration phase and we successfully validated its architecture and critical use-cases during several machine development sessions. After description of the architecture put in place and the components used, this paper describes the planning approach taken combining iterative development phases with deployment in operation for validation sessions.

  2. People and things. CERN Courier, Jun 1995, v. 35(4)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-06-15

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: Einstein lived here by Abraham Pais: Einstein enthusiasts will be pleased with Abraham Pais' new book 'Einstein lived here', advertised as a companion volume to Pais' classic Einstein biography 'Subtle is the Lord'. (Some of the material also appears in 'Subtle'.) As such the new volume is packed with anecdotes, quotes and other details to delight Einstein admirers and entertain the scientifically literate, but falls short of being a biography. Especially interesting is the background to his Nobel Prize, awarded for his explanation of the photoelectric effect and not for his monumental work on relativity, and the account of his first marriage, to Mileva Marie.; Giorgio Brianti retires: After a 40-year career spanning the whole of CERN's history, Giorgio Brianti retired from the Laboratory at the end of April. As well as having overseen many major projects, Brianti's dedicated work for CERN's next major machine, the LHC, scheduled to become operational in 2004, means his contributions will continue to be evident. Joining the infant Laboratory in 1954, Brianti was initially involved in industrial liaison, a theme to which he subsequently returned. After work on the magnets and then controls and instrumentation for the new PS proton synchrotron, he moved on to operations. In 1964 he became leader of Synchro-Cyclotron (SC) Division, at a time when the SC, CERN's first machine, was being substantially upgraded and its role extended for the ISOLDE on-line isotope separator. In 1967 he took charge of the team building the Booster, a new synchrotron to inject beams into the PS. As well as fulfilling its immediate objective of improving PS performance, the innovative design of the Booster and its astonishing adaptability are still paying dividends. Built to operate at 800 MeV, it has shown its

  3. CERN Technical Training - New courses available at CERN!

    CERN Multimedia

    HR Department

    2010-01-01

    1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

  4. 1970: ESO arrives at CERN

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    In 1970, CERN and ESO signed a collaboration agreement for the construction of the Observatory’s first telescope. That same year, ESO’s Telescope Division and Sky Atlas laboratory settled on the CERN site in Meyrin. Let’s turn back to the beginnings of this lasting and fruitful alliance.   Martin Cullum, ESO physicist from 1973 to 2009 In 1974, when I attended my first international conference on behalf of ESO, the first thing people asked was: “Where are you from?” “ESO,” I would say. The response: ‘'What on Earth is ESO?” Nowadays, people I meet seem to know more about ESO than I do! It is clear that ESO profited enormously from its sojourn at CERN. The wise decision of the ESO Director General at the time, Adriaan Blaauw, to move to Geneva allowed ESO to build up its technical expertise to be able to build world-beating projects like the VLT, which has undoubtedly been the most exciting scientif...

  5. Controlled longitudinal emittance blow-up using band-limited phase noise in CERN PSB

    Science.gov (United States)

    Quartullo, D.; Shaposhnikova, E.; Timko, H.

    2017-07-01

    Controlled longitudinal emittance blow-up (from 1 eVs to 1.4 eVs) for LHC beams in the CERN PS Booster is currently achievied using sinusoidal phase modulation of a dedicated high-harmonic RF system. In 2021, after the LHC injectors upgrade, 3 eVs should be extracted to the PS. Even if the current method may satisfy the new requirements, it relies on low-power level RF improvements. In this paper another method of blow-up was considered, that is the injection of band-limited phase noise in the main RF system (h=1), never tried in PSB but already used in CERN SPS and LHC, under different conditions (longer cycles). This technique, which lowers the peak line density and therefore the impact of intensity effects in the PSB and the PS, can also be complementary to the present method. The longitudinal space charge, dominant in the PSB, causes significant synchrotron frequency shifts with intensity, and its effect should be taken into account. Another complication arises from the interaction of the phase loop with the injected noise, since both act on the RF phase. All these elements were studied in simulations of the PSB cycle with the BLonD code, and the required blow-up was achieved.

  6. CERN takes part in Earth Hour

    CERN Multimedia

    Anaïs Vernède

    2011-01-01

    From 8.30 to 9.30 p.m. on Saturday, 26 March 2011, the Globe of Science and Innovation will be plunged into darkness to mark CERN's participation in Earth Hour. A growing number of countries and cities across the planet are involved in this global initiative against climate change, which was launched by the WWF in 2007.   The lights on the Globe were switched off for the 2009 Earth Hour event. Along with individuals, companies and tourist attractions in thousands of towns and cities all over the world participating in the fourth annual Earth Hour event, CERN will turn off the lights of the Globe for 60 minutes at 8.30 p.m. on Saturday 26 March. CERN's participation in the initiative is one of several examples of its commitment to respect the environment and keep its ecological footprint to the minimum. A recent example under the green transport heading was the replacement of part of CERN's petrol vehicle fleet with cars running on natural gas with a view to reducing air pollution. Other examples...

  7. A multichannel time-to-digital converter ASIC with better than 3 ps RMS time resolution

    International Nuclear Information System (INIS)

    Perktold, L; Christiansen, J

    2014-01-01

    The development of a new multichannel, fine-time resolution time-to-digital converter (TDC) ASIC is currently under development at CERN. A prototype TDC has been designed, fabricated and successfully verified with demonstrated time resolutions of better than 3 ps-rms. Least-significant-bit (LSB) sizes as small as 5 ps with a differential-non-linearity (DNL) of better than ±0.9 LSB and integral-non-linearity (INL) of better than ±1.3 LSB respectively have been achieved. The contribution describes the implemented architecture and presents measurement results of a prototype ASIC implemented in a commercial 130 nm technology

  8. CERN moves to http://home.cern

    CERN Multimedia

    2015-01-01

    A new top-level domain for CERN will be inaugurated next week, with the migration of the core website to http://home.cern.   The new home.cern webpage. The .cern top-level domain is intended for the exclusive use of CERN and its affiliates, and will soon be open for applications from within the community. Clear governance mechanisms for registration and management of .cern domains have been put in place. Applications for domains may be submitted by current members of the CERN personnel, and must be sponsored by a CERN entity such as a department, experiment, project or CERN-recognised experiment. For more information please refer to the registration policy. The acquisition of the .cern top-level domain was negotiated via ICANN’s new gTLD programme by a board comprising members of the CERN Legal Service, Communications group and IT department. .cern is one of over 1,300 new top-level domains that will launch over the coming months and years. The .cern domain nam...

  9. Experimental verification of neutron phenomenology in lead and of transmutation by adiabatic resonance crossing in accelerator driven systems a summary of the TARC project at CERN

    CERN Document Server

    Abánades, A; Andriamonje, Samuel A; Angelopoulos, Angelos; Apostolakis, Alcibiades J; Arnould, H; Belle, E; Bompas, C A; Brozzi, Delecurgo; Bueno, J; Buono, S; Carminati, F; Casagrande, Federico; Cennini, P; Collar, J I; Cerro, E; Del Moral, R; Díez, S; Dumps, Ludwig; Eleftheriadis, C; Embid, M; Fernández, R; Gálvez, J; García, J; Gelès, C; Giorni, A; González, E; González, O; Goulas, I; Heuer, R D; Hussonnois, M; Kadi, Y; Karaiskos, P; Kitis, G; Klapisch, Robert; Kokkas, P; Lacoste, V; Le Naour, C; López, C; Loiseaux, J M; Martínez-Val, J M; Méplan, O; Nifnecker, H; Oropesa, J; Papadopoulos, I M; Pavlopoulos, P; Pérez-Enciso, E; Pérez-Navarro, A; Perlado, M; Placci, Alfredo; Poza, M; Revol, Jean Pierre Charles; Rubbia, Carlo; Rubio, Juan Antonio; Sakelliou, L; Saldaña, F; Savvidis, E; Schussler, F; Sirvent, C; Tamarit, J; Trubert, D; Tzima, A; Viano, J B; Vieira, S L; Vlachoudis, V; Zioutas, Konstantin

    2001-01-01

    The Transmutation by Adiabatic Resonance Crossing (TARC) experiment was carried out as PS211 at the CERN PS from 1996 to 1999. Energy and space distributions of spallation neutrons (produced by 2.5 and 3.57 GeV/c CERN proton beams) slowing down in a 3.3*3.3*3 m/sup 3/ lead volume and neutron capture rates on long-lived fission fragments /sup 99/Tc and /sup 129/I demonstrate that Adiabatic Resonance Crossing (ARC) can be used to eliminate efficiently such nuclear waste and validate innovative simulation. (9 refs).

  10. Experimental Electron Cloud Studies in the CERN Proton Synchrotron

    CERN Document Server

    Mahner, E; Caspers, Friedhelm

    2008-01-01

    Indications for a beam-induced electron cloud build-up are observed since 2000 for the nominal LHC beam in the PS to SPS transfer line and during the last turns before ejection from the PS. A new electron cloud setup was designed, built, and installed in the PS. It contains shielded button-type pickups, a dipole magnet, a vacuum gauge, and a dedicated stripline electrode to experimentally verify the beneficial effect of electron cloud clearing electrodes. During the 2007 run, the electron cloud effect was also clearly observed in the PS and efficient electron cloud suppression has been obtained for negative and positive bias voltages on the clearing electrode. Here, we present electron cloud measurements with different filling patterns and bunch spacings in the PS.

  11. Testing the YerPhI Transimpedance Preamplifier with PPC by the T11 PS Beam

    CERN Document Server

    Parlakian, L K; CERN. Geneva; Martmianov, A N

    1997-01-01

    We report on the test of the preamplifier, described in [1], by the 3 GeV/c positive particle T11 beam of PS/CERN. We have measured the amplitude and time of flight spectrum, the time resolution and detection efficiency. The preamplifier has shown a stable work and hardness to the chamber discharge. The test results are presented.

  12. Now playing in a browser near you: TEDxCERN

    CERN Multimedia

    Katarina Anthony

    2013-01-01

    Earlier this month, CERN played host to one of the hottest, hippest and most educational parties around: TEDx. The event brought together thousands of viewers, speakers and participants from around the world.   The TEDxCERN event was the hottest ticket in town – and those who couldn’t make the event in person turned up online! More than 1,000 TEDxCERN fans watched the event via simulcast at viewing parties held in 27 institutions, but dominating the audience were the 10,870 unique viewers who tuned in to the live webcast, along with over 300 people who joined the webcast from CERN and another 300 watching it live from the Globe of Science and Innovation at CERN. But if you missed the excitement, never fear. Videos of the talks, as well as the clips presented during the talks themselves, are now available online. Just head to the TEDxCERN homepage and catch up! Watch as researcher Maya Tolstoy discusses seafloor earthquakes, Google Science Fair winner Brittany Wengler ...

  13. Experiments at CERN in 1977

    International Nuclear Information System (INIS)

    1977-08-01

    This report catalogues approved experiments at CERN and has been compiled as a guide to the status of the experimental research programme at the 400 GeV Proton Synchrotron (SPS), the Intersecting Storage Rings (ISR), the 25 GeV Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The schematic layouts of beams and experiments at the various machines are given in the beginning of the report and are followed by descriptive material on the experiments. In general, a short summary of each of the approved experiments is given with a description of the physics purpose, the apparatus employed, a list of the participants and the name of the collaboration. (Auth.)

  14. Experiments at CERN in 1979

    International Nuclear Information System (INIS)

    Anon.

    1979-08-01

    The 1979 catalogue of approved experiments at CERN has been compiled as a guide to the status of the experimental research programme at the 400 GeV Proton Synchrotron (SPS), the Intersecting Storage Rings (ISR), the 25 GeV Proton Synchrotron (PS), and the Synchrocyclotron (SC). The schematic layouts of beams and experiments at the various machines are given in the beginning of the report and are followed by descriptive material on the experiments. In general, a short summary of each of the approved experiments is given, with a description of the physics purpose, the apparatus employed, a list of the participants and the name of the collaboration. (Auth.)

  15. CERN stop-over for KEK and Fermilab Directors

    CERN Multimedia

    2001-01-01

    En route for a meeting of the International Committee for Future Accelerators, ICFA, held at Germany's DESY laboratory, the Directors of Japan's KEK laboratory and Fermilab in the United States had a stop-over at CERN last Wednesday 7 February. Dr Hirotaka Sugawara, Director General of Japan's high energy physics laboratory, KEK, visited the Antiproton Decelerator, AD. From left to right, Masaki Hori, member of the ASACUSA collaboration, John Eades, contact person for ASACUSA, Dr Hirotaka Sugawara, Werner Pirkl, the PS Division engineer responsible for the Radio Frequency Quadrupole decelerator in the foreground, and Kurt Hübner, CERN's Director of Accelerators. Dr Michael S. Witherell, Director of the Fermi National Accelerator Laboratory, Fermilab, visited construction sites for the LHC, ATLAS, and CMS. He is seen here with a module of the CMS hadronic calorimeter in building 186.

  16. The IEEE Milestone event at CERN

    CERN Multimedia

    2005-01-01

    On the initiative of its French and Swiss Sections, the IEEE has honoured CERN with an 'IEEE Milestone in the history of electricity and electronics' for the invention of the multi-wire proportional chamber in 1968. The IEEE established the Electrical Engineering Milestones programe in 1983 to honour significant achievements in the history of electrical and electronics engineering. To be designated, an achievement must be at least 25 years old, must have involved a unique solution to an engineering problem, and must have had at least regional impact. Currently there are more than  50 IEEE Milestones around the world. http://www.ieee.org/organizations/history_center/cern.html The installation and unveiling of this IEEE Milestone will provide the opportunity to emphasize the close relationship between science, technology, industry and well-being in society.  A ceremony, organised with the support of a group of IEEE members working at CERN, will be held at the CERN Globe of Science and Inn...

  17. Septum magnet for ejection from the PS to the E-Hall

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    Pulsed septum magnet for ejection from PS straight sections 61/62 to the East-Hall. This septum magnet, for ss 61, had only 1 turn, for minimum thickness. It was followed by another septum in ss 62, with 2 turns, as there the ejected beam was already farther away from the circulating beam. Both septa were water-cooled.

  18. Radiological Characterization of TFA metallic tubes from CERN Accelerator Complex

    CERN Document Server

    Saraiva, João Pedro de Carvalho; Carvalho, João

    The scope of this thesis consists in the radiological characterization of chilled water pipes used for air-conditioning and exposed to ionizing radiation in the PS accelerator, one of the CERN accelerators, for more than 40 years. Due to corrosion problems, the 1200 m of steel pipeline were removed from the PS tunnel during the long shutdowns between the years 2000 to 2004. The radiological characterization, that included the use of FLUKA Monte Carlo simulations and the JEREMY code, began in mid-2011 and revealed a radionuclide inventory with the presence of 55Fe as dominant radionuclide and 60Co as dominant gamma emitter. Due to operational reasons, only 5.5% of the pipeline were characterized for validation. In the course of this work it was found that the contribution of both aforementioned radionuclides corresponds to more than 90% of the total computed IRAS factor (Indice Radiologique d’Acceptation en Stokage). Two different methods were used for the characterization of the PS pipes, yielding two diffe...

  19. A new video studio for CERN

    CERN Multimedia

    Anaïs Vernede

    2011-01-01

    On Monday, 14 February 2011 CERN's new video studio was inaugurated with a recording of "Spotlight on CERN", featuring an interview with the DG, Rolf Heuer.   CERN's new video studio. Almost all international organisations have a studio for their audiovisual communications, and now it's CERN’s turn to acquire such a facility. “In the past, we've made videos using the Globe audiovisual facilities and sometimes using the small photographic studio, which is equipped with simple temporary sets that aren’t really suitable for video,” explains Jacques Fichet, head of CERN‘s audiovisual service. Once the decision had been taken to create the new 100 square-metre video studio, the work took only five months to complete. The studio, located in Building 510, is equipped with a cyclorama (a continuous smooth white wall used as a background) measuring 3 m in height and 16 m in length, as well as a teleprompter, a rail-mounted camera dolly fo...

  20. People and things. CERN Courier, Jun 1995, v. 35(4)

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: Einstein lived here by Abraham Pais: Einstein enthusiasts will be pleased with Abraham Pais' new book 'Einstein lived here', advertised as a companion volume to Pais' classic Einstein biography 'Subtle is the Lord'. (Some of the material also appears in 'Subtle'.) As such the new volume is packed with anecdotes, quotes and other details to delight Einstein admirers and entertain the scientifically literate, but falls short of being a biography. Especially interesting is the background to his Nobel Prize, awarded for his explanation of the photoelectric effect and not for his monumental work on relativity, and the account of his first marriage, to Mileva Marie.; Giorgio Brianti retires: After a 40-year career spanning the whole of CERN's history, Giorgio Brianti retired from the Laboratory at the end of April. As well as having overseen many major projects, Brianti's dedicated work for CERN's next major machine, the LHC, scheduled to become operational in 2004, means his contributions will continue to be evident. Joining the infant Laboratory in 1954, Brianti was initially involved in industrial liaison, a theme to which he subsequently returned. After work on the magnets and then controls and instrumentation for the new PS proton synchrotron, he moved on to operations. In 1964 he became leader of Synchro-Cyclotron (SC) Division, at a time when the SC, CERN's first machine, was being substantially upgraded and its role extended for the ISOLDE on-line isotope separator. In 1967 he took charge of the team building the Booster, a new synchrotron to inject beams into the PS. As well as fulfilling its immediate objective of improving PS performance, the innovative design of the Booster and its astonishing adaptability are still paying

  1. CERN School of Computing: reversing the roles

    CERN Multimedia

    2005-01-01

    Robert Aymar, CERN's Director-General, gives the floor to Sebastian Lopienski, one of the 77 students at CSC2004. The CERN Schools of Computing (CSC), which have been running since 1970, are two-week events organized once a year in one of the Member States, in collaboration with a national institute, to deliver theoretical and hands-on training to up to 80 students coming from all over the world. The objectives are to create a common knowledge background on key information technologies for young engineers/scientists collaborating in the CERN programme, as well as to transfer skills in computing techniques beyond particle physics. An intriguing event called the "inverted CSC" will take place at CERN from the 23rd to the 25th of February. The Weekly Bulletin has interviewed François Fluckiger, the CSC Director. Why this title, what is inverted? Well, the answer is in the subtitle: "Where students turn into teachers". This is a three-day series of lectures, organized and delivered by selected students of the...

  2. HiPS - Hierarchical Progressive Survey Version 1.0

    Science.gov (United States)

    Fernique, Pierre; Allen, Mark; Boch, Thomas; Donaldson, Tom; Durand, Daniel; Ebisawa, Ken; Michel, Laurent; Salgado, Jesus; Stoehr, Felix; Fernique, Pierre

    2017-05-01

    This document presents HiPS, a hierarchical scheme for the description, storage and access of sky survey data. The system is based on hierarchical tiling of sky regions at finer and finer spatial resolution which facilitates a progressive view of a survey, and supports multi-resolution zooming and panning. HiPS uses the HEALPix tessellation of the sky as the basis for the scheme and is implemented as a simple file structure with a direct indexing scheme that leads to practical implementations.

  3. Where students turn into teachers: the 9th Inverted CERN School of Computing

    CERN Multimedia

    2016-01-01

    Now in its ninth year, CERN’s “Inverted School of Computing – iCSC2016” will take place at CERN on 29 February – 2 March 2016 in the IT Auditorium (Room 31/3-004).   Attendance is free and open to everyone, and will be webcast for those who cannot attend in person. The programme consists mainly of individual lectures on single topics, while some lectures are complementary to each other and can be followed as a series. Registration is not compulsory, but will allow you to obtain a hard copy of the booklet, which includes the lecture slides and notes (while stocks last). Programme & registration: https://indico.cern.ch/e/iCSC2016 iCSC2016 This year’s programme, selected from a range of CSC2015 student proposals, focuses on challenging and innovative topics, including: Template Metaprogramming for Parallel Computing Detector Simulation for the LHC and beyond Event reconstruction in Modern Particle Physics Continuous Delivery and ...

  4. New types of subscriptions for CERN GSM

    CERN Multimedia

    IT Department

    2010-01-01

    A recent renegotiation of our commercial conditions with our mobile telephony operator allows us today to deploy new GSM mobile services, reduce communication costs, as well as put in place a new subscription system. First of all, the "email to SMS" service has already been extended to all Swiss numbers. This service allows you to send SMS messages (Short Message Service) to any Swiss mobile telephone from your CERN e-mail account. For further details, please refer to the web site http://cern.ch/sms. The sending of MMS messages (Multi-media Message Service) will be activated by default on all CERN subscriptions by the end of March 2010. This service allows users to attach to a text message an image, a video or an audio recording. All the necessary details for configuring this new service on CERN mobile phones will be published on the web site http://cern.ch/mms. Concerning mobile service costs, new rates have been put in place since 1st January 2010. All tariffs have dramatically decrea...

  5. CERN welcomes its first doctoral students from Morocco

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    This year marks the start of a new phase between CERN and Morocco with the arrival of the first two Moroccan students.   Mohamed Gouighri and Sara Boutouil, the first two Moroccan students at CERN. Thanks to the efforts of a small group of Moroccan academics, Morocco has been participating in the LHC programme for over ten years. About ten Moroccan physicists are members of the ATLAS collaboration, which comprises over 2000 physicists and 165 research institutes from 37 different countries. The arrival of the first Moroccan doctoral students at CERN was the logical next step. The new programme is the result of a multi-party agreement between CERN, the Sharing Knowledge Foundation, the Moroccan universities participating in the LHC programme and the Hassan II Academy of Science and Technology. Mohamed Gouighri is the first Moroccan to obtain a scholarship to study at CERN, which is being funded by the Hassan II Academy of Science and Technology. He has been studying physics at the Faculty of S...

  6. GPS Precision Timing at CERN

    CERN Document Server

    Beetham, C G

    1999-01-01

    For the past decade, the Global Positioning System (GPS) has been used to provide precise time, frequency and position co-ordinates world-wide. Recently, equipment has become available specialising in providing extremely accurate timing information, referenced to Universal Time Co-ordinates (UTC). This feature has been used at CERN to provide time of day information for systems that have been installed in the Proton Synchrotron (PS), Super Proton Synchrotron (SPS) and the Large Electron Positron (LEP) machines. The different systems are described as well as the planned developments, particularly with respect to optical transmission and the Inter-Range Instrumentation Group IRIG-B standard, for future use in the Large Hadron Collider (LHC).

  7. PS wire chamber

    CERN Multimedia

    1970-01-01

    A wire chamber used at CERN's Proton Synchrotron accelerator in the 1970s. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  8. Record Recommendations for the CERN Document Server

    CERN Document Server

    AUTHOR|(CDS)2096025; Marian, Ludmila

    CERN Document Server (CDS) is the institutional repository of the European Organization for Nuclear Research (CERN). It hosts all the research material produced at CERN, as well as multi- media and administrative documents. It currently has more than 1.5 million records grouped in more than 1000 collections. It’s underlying platform is Invenio, an open source digital library system created at CERN. As the size of CDS increases, discovering useful and interesting records becomes more challenging. Therefore, the goal of this work is to create a system that supports the user in the discovery of related interesting records. To achieve this, a set of recommended records are displayed on the record page. These recommended records are based on the analyzed behavior (page views and downloads) of other users. This work will describe the methods and algorithms used for creating, implementing, and the integration with the underlying software platform, Invenio. A very important decision factor when designing a recomme...

  9. Common control system for the CERN accelerators

    International Nuclear Information System (INIS)

    Rausch, R.; Serre, Ch.

    1992-01-01

    The PS and SPS Accelerator Control Systems are becoming obsolete and need urgent rejuvenation. After a control users forum, where users expressed their needs, two main Working Groups were set up, consisting of Control and Equipment Specialists and experienced Machine Operators. One Working Group studied the architecture and the front-end processing and the other a common approach to the application software needed to run the CERN accelerator complex. The paper presents the technical conclusion of their work and the policy to implement it, taking into account the necessity to operate both machines without interruption of the Physics Program. (author)

  10. A Single Pulse Beam Emittance Measurement for the CERN Heavy Ion Linac

    CERN Document Server

    Crescenti, M

    1995-01-01

    A new device for transverse emittance measurement has been installed in the 4.2 MeV/u filter region of the CERN Heavy Ion Linac (Linac 3). It allows to obtain pulse-to-pulse (every 1.2 sec) visualisation of the Linac 3 beam parameters in order to tune the machine and to match the beam for injection into the first circular accelerator, the PS Booster. The system is based on the "multi-slit" technique similar to the well-known "pepper pot" method. A plate with a series of horizontal or vertical slits is placed in the beam, defining positions in the phase plane. Particles pass through the slits and drift to a scintillator screen where they produce light. The screen is looked at by an externally triggered high resolution CCD camera. For each slit position the light intensity distribution, in the limit of infinitesimal slit aperture, is proportional to the angle distribution of the particles and therefore, provides the angular distribution in the phase plane. The video signal from the camera is digitised and the r...

  11. IRRAD: The New 24GeV/c Proton Irradiation Facility at CERN

    CERN Document Server

    Gkotse, Blerina; Moll, Michael; Ravotti, Federico

    2016-01-01

    The proton and mixed-field irradiation facilities at the CERN PS East Area (known as IRRAD1 and IRRAD2), have been heavily exploited for irradiation of particle detectors, electronic components and materials since 1992. With the increasing demand of irradiation experiments, and in view of the High-Luminosity upgrade of the CERN Large Hadron Collider (HL-LHC), these facilities suffered of a number of unpleasant restrictions such as the space availability, the maximum achievable particle flux and several access constraints. In the framework of the AIDA project, an upgrade of these facilities was carried out during the Long Shutdown 1 (LS1) of the CERN accelerator complex. The new combined East Area IRRADiation facility (EA-IRRAD) started the commissioning in October 2014. While the new proton facility (IRRAD) continue to be mainly devoted to the radiation hardness studies for the High Energy Physics community, the new mixed-field facility (CHARM) mainly hosts irradiation experiments for the validation of electr...

  12. On the crystallization behavior of syndiotactic-b-atactic polystyrene stereodiblock copolymers, atactic/syndiotactic polystyrene blends, and aPS/sPS blends modified with sPS-b-aPS

    Energy Technology Data Exchange (ETDEWEB)

    Annunziata, Liana, E-mail: liana.annunziatta@univ-rennes1.fr [Organométalliques et Catalyse, UMR 6226 Sciences Chimiques CNRS, Université de Rennes 1, Campus de Beaulieu, F-35042 Rennes Cedex (France); Monasse, Bernard, E-mail: bernard.monasse@mines-paristech.fr [Mines-ParisTech, CEMEF, Centre de Mise en Forme des Matériaux, UMR CNRS 7635, Sophia Antipolis (France); Rizzo, Paola; Guerra, Gaetano [Dipartimento di Chimica e Biologia, Università degli studi di Salerno, Via Ponte don Melillo, I-84084 Fisciano, SA (Italy); Duc, Michel [Total Petrochemicals Research Feluy, Zone Industrielle Feluy C, B-7181 Seneffe (Belgium); Carpentier, Jean-François, E-mail: jean-francois.carpentier@univ-rennes1.fr [Organométalliques et Catalyse, UMR 6226 Sciences Chimiques CNRS, Université de Rennes 1, Campus de Beaulieu, F-35042 Rennes Cedex (France)

    2013-09-16

    Crystallization and morphological features of syndiotactic-b-atactic polystyrene stereodiblock copolymers (sPS-b-aPS), atactic/syndiotactic polystyrene blends (aPS/sPS), and aPS/sPS blends modified with sPS-b-aPS, with different compositions in aPS and sPS, have been investigated using differential scanning calorimetry (DSC), polarized light optical microscopy (POM) and wide angle X-ray diffraction (WAXRD) techniques. For comparative purposes, the properties of parent pristine sPS samples were also studied. WAXRD analyses revealed for all the samples, independently from their composition (aPS/sPS ratio) and structure (blends, block copolymers, blends modified with block copolymers), the same polymorphic β form of sPS. The molecular weight of aPS and sPS showed opposite effects on the crystallization of 50:50 aPS/sPS blends: the lower the molecular weight of aPS, the slower the crystallization while the lower the molecular weight of sPS, the faster the crystallization. DSC studies performed under both isothermal and non-isothermal conditions, independently confirmed by POM studies, led to a clear trend for the crystallization rate at a given sPS/aPS ratio (ca. 50:50 and 20:80): sPS homopolymers > sPS-b-aPS block copolymers ∼sPS/aPS blends modified with sPS-b-aPS copolymers > sPS/aPS blends. Interestingly, sPS-b-aPS block copolymers not only crystallized faster than blends, but also affected positively the crystallization behavior of blends. At 50:50 sPS/aPS ratio, blends (Blend-2), block copolymers (Cop-1) and blends modified with block copolymers (Blend-2-mod) crystallized via spherulitic crystalline growth controlled by an interfacial process. In all cases, an instantaneous nucleation was observed. The density of nuclei in block copolymers (160,000−190,000 nuclei mm{sup −3}) was always higher than that in blends and modified blends (30,000−60,000 nuclei mm{sup −3}), even for quite different sPS/aPS ratio. At 20:80 sPS/aPS ratio, the block copolymers

  13. CDD CERN Drawings Directory User's manual Version 1.1

    CERN Document Server

    Delamare, Christophe; Jeannin, F; Petit, S

    1996-01-01

    CDD (CERN Drawings Directory) is a multi-platform utility which manages engineering drawings made in any division at CERN. The aim of CDD is not to store the graphical drawing itself, but to store a reference with some information related to the drawing. Access to this data is provided via a graphical user interface which is based upon ORACLE Forms and via WWW. Drawings following different numbering systems and different management rules can be handled by CDD. The only condition is that those particular functionalities are well defined. Several drawing systems have been identified in CERN and therefore considered when designing the application. The current version of CDD focuses on systems EST, LEP, ST-IE, SPS, ST-CE and the experiments ALICE, ATLAS, CMS and LHCb. Other CERN systems could be easily integrated upon demand.

  14. Finally, a crèche at CERN!

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    After many years of discussion, the CERN Staff Association’s first crèche will open its doors in September to welcome up to 20 babies and toddlers.   A delicate operation: the installation of 11 modules above the Nursery's School canteen. Image: Sigrid Knoops. The CERN Staff Association’s Nursery School, which will soon turn 50, is pleased to announce the establishment of CERN’s first crèche. This project, which has come to fruition over the past academic year with the support of the CERN Management, meets an established and growing need among the Laboratory’s personnel and users. As a modular construction, the Nursery School’s new second floor was assembled above the existing canteen in a matter of days. Its 11 modules are ultra-modern – they’re even equipped with underfloor heating. “Thanks to this extension, we will be able to accept around twenty babies at the start of the academ...

  15. Sixty Days Remaining, Forty Years of CERN, Two Brothers, One Exclusive Interview

    CERN Multimedia

    2001-01-01

    Twins Marcel and Daniel Genolin while sharing memories of their CERN experiences, point out just how much smaller the Meyrin site once was. In a place such as CERN where the physical sciences are in many ways the essence of our daily lives and where technological advancement is an everyday occurrence, it is easy to lose track of the days, months, and even years. But last week twin brothers, Daniel and Marcel Genolin, hired in the early sixties and getting ready to end their eventful forty year CERN experiences, made it clear that the winds of time bluster past us whether we are aware or not. 'CERN was very small when we started' says Marcel, who has worked in transport during his entire time here. A lot has changed. 'When I got here there were no phones in peoples' houses' he recalls,'when there were problems in the control room with the PS (Proton Synchrotron) they used to get a megaphone and tell us {the transport service} to go and get the necessary physicists from their homes in the area. We had to lo...

  16. Plans for the Future of Proton Accelerators at CERN

    CERN Document Server

    Garoby, R; High Intensity Frontier Workshop (HIF04)

    2005-01-01

    The Large Hadron Collider, presently in construction at CERN, will be filled through a set of high performance proton accelerators providing the high brightness beam needed to reach the foreseen luminosity. Although this difficult project has top priority and uses most of the CERN resources, it is nevertheless time investigating improvements of the proton accelerator complex for physical cases beyond the LHC expectations. The needs of multiple physics communities have to be taken into account, as well as the necessity of consolidating the installations while keeping high reliability. This paper starts from the analysis and proposals made by the “High Intensity Proton” (HIP) working group [1, 2] to improve the performances of the PS and the SPS complex and better match the users requests in a staged scenario at short and medium term, and complement it, addressing the main possibilities beyond that horizon.

  17. People and things. CERN Courier, Oct 1991, v. 31(8)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1991-10-15

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; Hampton University Graduate Studies (HUGS) at CEBAF, a summer program in electromagnetic nuclear physics held at the Continuous Electron Beam Accelerator Facility, Newport News, Virginia, has completed its sixth year. ; With research and development work pushing ahead for the experimental programme at the proposed LHC proton collider in CERN's LEP tunnel, attention is also turning to preparations for the experiments themselves.

  18. CERN apprenticeships honoured at the Cité des Métiers

    CERN Multimedia

    2006-01-01

    Florian Métral, an electronics apprentice at CERN, accepting his prize at the award ceremony.CERN's exhibition stand at the Cité des Métiers et des Formations. CERN has just taken part in the Cité des Métiers et des Formations for the first time. This job and training fair, designed to assist both young people and adults in their choice of profession, training or career change, was held at Palexpo, Geneva's main exhibition centre, from 13 to 19 November. CERN had its own stand, where the Laboratory's activities and its many different trades and training opportunities were on display. Throughout the week and the weekend, a series of guides and members of the HR Department took it in turns to present CERN and the wide range of training it offers students and apprentices. Apprentices came into the spotlight on 13 November, when the Union Industrielle Genevoise awarded prizes to the eight most meritorious apprentices in the field of mecatronics (mechanical and electronics engineering) in the Canton of Gene...

  19. Exchange of equipment between CERN and JINR

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The drift chambers of the former NA48 experiment have recently left CERN to be installed in the MPD experiment at the future NICA accelerator in Dubna, Russia. As a counterpart, the JINR Laboratory will produce drift chambers for the new NA62 experiment. This operation is a fruitful exchange of technology that profits both laboratories and enhances their collaboration.   On 22 July, in the occasion of the departure of the chambers from CERN, Mikhail Itkis (centre), acting Director of the JIINR visited the NA62 experimental area accompanied by Rolf Heuer (left), CERN Director General and Ferdinand Hahn, NA62 technical Co-ordinator. The NA48 drift chambers were overhauled in 2000 and employed until 2008. With a total of 110 kilometres of wire soldered to a very high degree of precision, the four drift chambers were a crucial element of the experimental kaon programme at CERN. The chambers are now moving to a new challenge as they will be re-used by the Multi Purpose Detector (MPD) experiment, under...

  20. People and things. CERN Courier, Oct 1991, v. 31(8)

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; Hampton University Graduate Studies (HUGS) at CEBAF, a summer program in electromagnetic nuclear physics held at the Continuous Electron Beam Accelerator Facility, Newport News, Virginia, has completed its sixth year. ; With research and development work pushing ahead for the experimental programme at the proposed LHC proton collider in CERN's LEP tunnel, attention is also turning to preparations for the experiments themselves

  1. The Multi/Plural Turn, Postcolonial Theory, and Neoliberal Multiculturalism: Complicities and Implications for Applied Linguistics

    Science.gov (United States)

    Kubota, Ryuko

    2016-01-01

    In applied linguistics and language education, an increased focus has been placed on plurality and hybridity to challenge monolingualism, the native speaker norm, and the modernist view of language and language use as unitary and bounded. The multi/plural turn parallels postcolonial theory in that they both support hybridity and fluidity while…

  2. A high-throughput, multi-channel photon-counting detector with picosecond timing

    Science.gov (United States)

    Lapington, J. S.; Fraser, G. W.; Miller, G. M.; Ashton, T. J. R.; Jarron, P.; Despeisse, M.; Powolny, F.; Howorth, J.; Milnes, J.

    2009-06-01

    High-throughput photon counting with high time resolution is a niche application area where vacuum tubes can still outperform solid-state devices. Applications in the life sciences utilizing time-resolved spectroscopies, particularly in the growing field of proteomics, will benefit greatly from performance enhancements in event timing and detector throughput. The HiContent project is a collaboration between the University of Leicester Space Research Centre, the Microelectronics Group at CERN, Photek Ltd., and end-users at the Gray Cancer Institute and the University of Manchester. The goal is to develop a detector system specifically designed for optical proteomics, capable of high content (multi-parametric) analysis at high throughput. The HiContent detector system is being developed to exploit this niche market. It combines multi-channel, high time resolution photon counting in a single miniaturized detector system with integrated electronics. The combination of enabling technologies; small pore microchannel plate devices with very high time resolution, and high-speed multi-channel ASIC electronics developed for the LHC at CERN, provides the necessary building blocks for a high-throughput detector system with up to 1024 parallel counting channels and 20 ps time resolution. We describe the detector and electronic design, discuss the current status of the HiContent project and present the results from a 64-channel prototype system. In the absence of an operational detector, we present measurements of the electronics performance using a pulse generator to simulate detector events. Event timing results from the NINO high-speed front-end ASIC captured using a fast digital oscilloscope are compared with data taken with the proposed electronic configuration which uses the multi-channel HPTDC timing ASIC.

  3. A high-throughput, multi-channel photon-counting detector with picosecond timing

    International Nuclear Information System (INIS)

    Lapington, J.S.; Fraser, G.W.; Miller, G.M.; Ashton, T.J.R.; Jarron, P.; Despeisse, M.; Powolny, F.; Howorth, J.; Milnes, J.

    2009-01-01

    High-throughput photon counting with high time resolution is a niche application area where vacuum tubes can still outperform solid-state devices. Applications in the life sciences utilizing time-resolved spectroscopies, particularly in the growing field of proteomics, will benefit greatly from performance enhancements in event timing and detector throughput. The HiContent project is a collaboration between the University of Leicester Space Research Centre, the Microelectronics Group at CERN, Photek Ltd., and end-users at the Gray Cancer Institute and the University of Manchester. The goal is to develop a detector system specifically designed for optical proteomics, capable of high content (multi-parametric) analysis at high throughput. The HiContent detector system is being developed to exploit this niche market. It combines multi-channel, high time resolution photon counting in a single miniaturized detector system with integrated electronics. The combination of enabling technologies; small pore microchannel plate devices with very high time resolution, and high-speed multi-channel ASIC electronics developed for the LHC at CERN, provides the necessary building blocks for a high-throughput detector system with up to 1024 parallel counting channels and 20 ps time resolution. We describe the detector and electronic design, discuss the current status of the HiContent project and present the results from a 64-channel prototype system. In the absence of an operational detector, we present measurements of the electronics performance using a pulse generator to simulate detector events. Event timing results from the NINO high-speed front-end ASIC captured using a fast digital oscilloscope are compared with data taken with the proposed electronic configuration which uses the multi-channel HPTDC timing ASIC.

  4. Dynamics and tolerances for the CERN interdigital H LINAC

    International Nuclear Information System (INIS)

    Valero, S.; Ratzinger, U.

    1992-01-01

    A three tank interdigital H structure has been chosen for the 0.25 to 4.2 MeV/u part of the CERN heavy-ion injector linac. The complete design has been developed by GSI, in particular the longitudinal dimensions have been determined and multi-particle studies have been made using the program LORAS. Some RF tolerance studies have also be made at CERN using this program. For more general approach to the dynamics, the program DYNAC is being used at CERN especially where statistical analyses are essential i.e for determining emittance growth, tolerances on accelerator parameters and alignment. The approaches and results of these two programs are compared for this novel type of accelerator

  5. Transverse beam splitting made operational: Key features of the multiturn extraction at the CERN Proton Synchrotron

    Directory of Open Access Journals (Sweden)

    A. Huschauer

    2017-06-01

    Full Text Available Following a successful commissioning period, the multiturn extraction (MTE at the CERN Proton Synchrotron (PS has been applied for the fixed-target physics programme at the Super Proton Synchrotron (SPS since September 2015. This exceptional extraction technique was proposed to replace the long-serving continuous transfer (CT extraction, which has the drawback of inducing high activation in the ring. MTE exploits the principles of nonlinear beam dynamics to perform loss-free beam splitting in the horizontal phase space. Over multiple turns, the resulting beamlets are then transferred to the downstream accelerator. The operational deployment of MTE was rendered possible by the full understanding and mitigation of different hardware limitations and by redesigning the extraction trajectories and nonlinear optics, which was required due to the installation of a dummy septum to reduce the activation of the magnetic extraction septum. This paper focuses on these key features including the use of the transverse damper and the septum shadowing, which allowed a transition from the MTE study to a mature operational extraction scheme.

  6. CERN: A tale of two photons

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    When precision data from the several million Zs carefully collected over several years by the four big experiments - Aleph, Delphi, L3 and Opal - at CERN's LEP electron-positron collider have otherwise consistently underlined conventional physics, a hint of something unexplained quickly packs the seminar rooms. In 1991, the L3 experiment turned up two examples of Z decays producing a muon pair accompanied by a widely separated pair of high energy photons, with the photon pair in each case taking some 60 GeV of energy (actually 58.8 and 59.0 GeV). Nothing to get excited about at the time, but ongoing data analysis tuned into this channel. This year two more events turned up, one again with a muon pair accompanied by a 60 GeV photon pair, the other with an electron (electron-positron) pair and a 62 GeV photon pair. At first L3 preferred to keep this quiet, and the news was not announced at the major international meeting in Dallas last August. The first public announcement of the four unexplained events (out of a total of 1.6 million Z decays) came in a LEP Experiments Committee session at CERN in October

  7. Theoretical considerations regarding the existence of PsO and PsS+

    International Nuclear Information System (INIS)

    Farazdel, A.; Cade, P.E.

    1977-01-01

    It has been proposed from experimental studies and in analogy with hydrogen compounds that PsO may be an entity of some importance, or an intermediate, in the reaction of positronium, Ps, with aqueous oxyacid species such as H 2 PO 4 - , HSO 4 - , ClO 4 - , and NO 3 - . This communication explores the stability of PsO and PsS, or [O - :e + ] and [S - :e + ], respectively, relative to dissociation into Ps and O( 3 P) or S( 3 P) on the basis of restricted Hartree-Fock calculations for the PsO and PsS systems and certain correlation correction arguments. A reasonable lower estimate of the dissociation energy to Y+Ps of >-0.47 eV for PsO and >0.70 eV for PsS is obtained. It is suggested that a modest correlation correction to the positron affinity (PA) of O - would very probably lead to a bound state system for PsO. (Auth.)

  8. First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character.

  9. First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character. More information: http://www.rezonance.ch, or view the joint UK event program

  10. Important changes for cern.market and other newsgroups at CERN

    CERN Multimedia

    2007-01-01

    The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read http://cern.ch/mail/help/?fdid=33 for more information. The Mail Services team

  11. The flags of CERN's member states in the parking lot next to the main entrance.

    CERN Multimedia

    CERN PhotoLab

    1960-01-01

    CERN has always had a global mission. Its twelve founding Member States may well have been European, but the setting-up of the Laboratory owed much to the United States, for example, which wished to see the re-emergence of a strong European scientific community after the Second World War. There were thus exchanges with the American scientific community from the very start, particularly for the design of the PS. Similarly, CERN rapidly engaged in exchanges with Soviet institutes, even at the height of the Cold War. The twelve founding Member States, Belgium, Denmark, France, the Federal Republic of Germany, Greece, Italy, the Netherlands, Norway, Sweden, Switzerland, the United Kingdom and Yugoslavia (which left CERN in 1961), were joined by Austria (1959), Spain (1961, and again in 1983 having left in 1969), Portugal (1985), Finland and Poland (1991), Hungary (1992), the Czech and Slovak Republics (1993) and Bulgaria (1999)

  12. Inverted CERN School of Computing

    CERN Multimedia

    IT Department

    2011-01-01

      The 5th edition of the Inverted CERN School of Computing (iCSC, “Where students turn into teachers”) will take place next Thursday and Friday (3 and 4 of March) at CERN, Building 31 - IT Amphitheatre - Third Floor. Attendance is free and open to everyone. The programme is designed so that you can attend the lectures that interest you. This year highlights: Cloud Computing, Software Engineering, Cryptography Registration is not mandatory, but will allow you to obtain a copy of the full booklet (first registered, first served). Programme overview: Thursday 3 March 2011 10:00 - 10:15 Introduction School opening 10:15 - 11:10 Lecture 1 Virtualization: what it is, how it works – Luigi Gallerani 11:20 - 12:15 Lecture 2 Server Virtualization at work – Carlos Garcia Fernandez 14:00 - 14:55 Lecture 3 Unweaving Clouds: Principles and Practice – Belmiro Moreira 15:30 - 16:25 Lecture 4 Understanding Cryptography: From Caesar to Public-Key – Nicola...

  13. Study of longitudinal multibunch instabilities for LHC-type beams at the CERN Proton Synchrotron

    CERN Document Server

    Ventura, Letizia; Migliorati, Mauro; Palumbo, Luigi

    This Master thesis work has been carried out at CERN in the framework of the LHC (Large Hadron Collider) Injector upgrade program (LIU). Longitudinal coupled-bunch (CB) oscillations are an important limitation for the high-brightness beam accelerated in the CERN Proton Synchrotron. Up to present intensities they are suppressed by a dedicated feedback system limited to the first two dominant oscillation modes. In view of the proposed installation of a new wide-band FB system in the framework of the LIU program, measurements have been performed on the old system with the aim of dimensioning the new one. A new simulation program, called LCBC ( Longitudinal Coupled Bunch Simulation), has been used to study the behaviour of the CB FB. By means of this code I have started an extensive simulation campaign to benchmark the code with the theory of coupled bunch and to confirm that the 10 MHz cavity system is the main cause of the coupled bunch instabilities in the CERN PS.

  14. Multi-component fits to high energy pp and anti pp scattering

    International Nuclear Information System (INIS)

    Haim, D.; Maor, U.

    1992-01-01

    A method for the analysis and description of high energy elastic scattering amplitudes in the forward direction is proposed. In this method each component of the hadronic amplitude acquires its own nuclear slope. We fit the data for the differential cross section, which was obtained at the ISR and the CERN Spanti pS colliders, using the multi-component amplitude. As a result, two asymptotically (s→∞) different modes emerge. One is compatible with a black disk, which yields a ratio for the elastic to the total cross section σ el /σ tot =0.5 as s→∞, and the other is a white-grey disk model which yields σ el /σ tot =0.07 as s→∞. Both models have the same results for σ tot and ρ for all √s which are experimentally accessible. Our results show that all the data can be fitted under the same amplitude to a better degree, point by point, than the low momentum transfer amplitude, which was used by the experiments. In addition, our ratio of real to imaginary part of the hadronic amplitude at the CERN Spanti pS, ρ=0.14, resolves the ambiguity about the high value which was measured by the UA4 Collaboration. Our predicted total cross section at the Tevatron, σ tot =73.9 mb, is in good agreement with the recent measurement of the E-710 Collaboration. As a final step, we make predictions for the LHC and the SSC colliders. (orig.)

  15. Dynamics and tolerances for the CERN Interdigital H linac

    International Nuclear Information System (INIS)

    Bylinsky, Y.; Ratzinger, U.; Valero, S.

    1992-01-01

    A three tank Interdigital H structure has been chosen for the 0.25 to 4.2 MeV/u part of the CERN heavy-ion injector linac. The complete design has been developed by GSI; in particular the longitudinal dimensions have been determined and multi-particle studies have been made using the program LORAS. Some RF tolerance studies have also been made at CERN using this program. For a more general approach to the dynamics, the program DYNAC is being used at CERN, especially where statistical analyses are essential; i.e. for determining emittance growth, tolerances on accelerator parameters and alignment. The approaches and results of these two programs are compared for this novel type of accelerator. (Author) 6 refs., 3 tabs., 3 figs

  16. Important changes for cern.market and other newsgroups at CERN

    CERN Multimedia

    2007-01-01

    The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read go there for more information. The Mail Services team

  17. Collide@CERN: exclusive open rehearsal of Gilles Jobin's last piece

    CERN Multimedia

    2012-01-01

    Collide@CERN and Gilles Jobin, artist in residency at CERN, present an exclusive open rehearsal of his last piece SPIDER GALAXIES Tuesday 31 July 2012 - A new piece created to open new territories of the mind - Join us in Restaurant 1 from 4 p.m. (next to the Glass Box Restaurant) With this piece, the body turns into matter, which is complete, spatial and sensual. Come and see Gilles Jobin and his dancers. With a score by Cristian Vogel and Carla Scaletti invoking sound particles, while Daniel Demont disperses the spectrum. Protean, infinitely large or infinitesimal, such are the Spider Galaxies.    

  18. John Adams and CERN: Personal Recollections

    CERN Document Server

    Brianti, Giorgio

    2013-01-01

    By any standards, John Adams had a most remarkable career. He was involved in three important, emerging technologies, radar, particle accelerators and controlled fusion, and had an outstanding impact on the last two. Without a university education, he attained hierarchical positions of the highest level in prestigious national and international organizations. This article covers the CERN part of his career, by offering some personal insights into the different facets of his contributions to major accelerator projects, from the first strong-focusing synchrotron, the PS, to the SPS and its conversion to a proton–antiproton collider. In particular, it outlines his abilities as a leader of an international collaboration, which has served as an example for international initiatives in other disciplines.

  19. The Scandinavian countries and CERN's large 300 GeV accelerator

    International Nuclear Information System (INIS)

    Steine, A.O.

    1977-01-01

    Following introductory chapters on the theme, the source material, the history, organisation and functioning of CERN and the place of nuclear research in the scientific research political landscape of the Scandinavian countries, the preliminary basis for the new 300 GeV synchroton, that it be sited elsewhere than in Switzerland is presented. The discussion as to whether Norway should offer a site is presented, and the reasons for the governments decision to do so given. The Swedish offer is also discussed. The discussions and attitudes in Sweden, Norway and Denmark to the first project are presented in turn, and their reasons for following the British rejection are given. The revised project is also described, and the discussions on this in the three countries are treated in turn. A chapter also describes Finland's relationship to CERN. In the final chapter certain aspects in e.g. the motivation of participants in the discussions are treated. (JIW)

  20. Monitoring Evolution at CERN

    CERN Document Server

    Andrade, P; Murphy, S; Pigueiras, L; Santos, M

    2015-01-01

    Over the past two years, the operation of the CERN Data Centres went through significant changes with the introduction of new mechanisms for hardware procurement, new services for cloud provisioning and configuration management, among other improvements. These changes resulted in an increase of resources being operated in a more dynamic environment. Today, the CERN Data Centres provide over 11000 multi-core processor servers, 130 PB disk servers, 100 PB tape robots, and 150 high performance tape drives. To cope with these developments, an evolution of the data centre monitoring tools was also required. This modernisation was based on a number of guiding rules: sustain the increase of resources, adapt to the new dynamic nature of the data centres, make monitoring data easier to share, give more flexibility to Service Managers on how they publish and consume monitoring metrics and logs, establish a common repository of monitoring data, optimise the handling of monitoring notifications, and replace the previous ...

  1. AMS02 Ecal γ trigger performance measured at the October 2004 CERN test beam

    International Nuclear Information System (INIS)

    Brun, Pierre; Rosier-Lees, Sylvie

    2006-01-01

    Test beam data collected in October 2004 at CERN PS to validate the AMS 02 Ecal Inter- mediate Board (EIB) are analyzed. After describing the experimental setup and the event samples, results concerning noise measurement, trigger efficiency and threshold accuracy are presented. They demonstrate that the EIB fulfills the physics requirements. Therefore the analog part of the trigger is validated, and hardware choices are also made towards the final device. (authors)

  2. PS BOOSTER BEAM TESTS OF THE NEW DIGITAL BEAM CONTROL SYSTEM FOR LEIR

    CERN Document Server

    Angoletta, Maria Elena; Bento, J; De Long, J H; Findlay, A; Matuszkiewicz, P; Pedersen, F; Salom-Sarasqueta, A; CERN. Geneva. AB Department

    2005-01-01

    We have been developing a scaled-down prototype of the new digital beam control and cavity servoing system for CERN’s Low Energy Ion Ring (LEIR) slated for commissioning in 2005. The system’s hardware and software, developed as part of a CERN-BNL collaboration, are based on new all-digital technology already deployed at BNL's AGS Booster. The system relies on VME modules, carrying Digital Signal Processors (DSPs) as well as Field Programmable Gate Arrays (FPGAs), and daughter cards. New concepts deployed include software implementation, through DSPs & FPGAs, of functions traditionally executed by analogue hardware, such as reference-functions and timings generation. Additionally, a user-selectable digital data acquisition functionality provides diagnostic and troubleshoot access points, a new feature which is very useful in a digital system. The scaled-down prototype implements frequency program, radial steering, phase and radial loops capabilities and it has been tested in CERN's PS Booster (PSB) dur...

  3. Beam test results of a 16 ps timing system based on ultra-fast silicon detectors

    Energy Technology Data Exchange (ETDEWEB)

    Cartiglia, N., E-mail: cartiglia@to.infn.it [INFN, Torino (Italy); Staiano, A.; Sola, V. [INFN, Torino (Italy); Arcidiacono, R. [INFN, Torino (Italy); Università del Piemonte Orientale (Italy); Cirio, R.; Cenna, F.; Ferrero, M.; Monaco, V.; Mulargia, R.; Obertino, M.; Ravera, F.; Sacchi, R. [INFN, Torino (Italy); Università di Torino, Torino (Italy); Bellora, A.; Durando, S. [Università di Torino, Torino (Italy); Mandurrino, M. [Politecnico di Torino, Torino (Italy); Minafra, N. [University of Kansas, KS (United States); Fadeyev, V.; Freeman, P.; Galloway, Z.; Gkougkousis, E. [SCIPP, University of California Santa Cruz, CA 95064 (United States); and others

    2017-04-01

    In this paper we report on the timing resolution obtained in a beam test with pions of 180 GeV/c momentum at CERN for the first production of 45 µm thick Ultra-Fast Silicon Detectors (UFSD). UFSD are based on the Low-Gain Avalanche Detector (LGAD) design, employing n-on-p silicon sensors with internal charge multiplication due to the presence of a thin, low-resistivity diffusion layer below the junction. The UFSD used in this test had a pad area of 1.7 mm{sup 2}. The gain was measured to vary between 5 and 70 depending on the sensor bias voltage. The experimental setup included three UFSD and a fast trigger consisting of a quartz bar readout by a SiPM. The timing resolution was determined by doing Gaussian fits to the time-of-flight of the particles between one or more UFSD and the trigger counter. For a single UFSD the resolution was measured to be 34 ps for a bias voltage of 200 V, and 27 ps for a bias voltage of 230 V. For the combination of 3 UFSD the timing resolution was 20 ps for a bias voltage of 200 V, and 16 ps for a bias voltage of 230 V.

  4. Determination of the Neutron Fluence, the Beam Characteristics and the Backgrounds at the CERN-PS TOF Facility

    CERN Multimedia

    Leal, L C; Kitis, G; Guber, K H; Quaranta, A; Koehler, P E

    2002-01-01

    In the scope of our programme we propose to start in July 2000 with measurements on elements of well known cross sections, in order to check the reliability of the whole experimental installation at the CERN-TOF facility. These initial exploratory measurements will provide the key-parameters required for the further experimentation at the CERN-TOF neutron beam. The neutron fluence and energy resolution will be determined as a function of the neutron kinetic energy by reproducing standard capture and fission cross sections. The measurements of capture cross sections on elements with specific cross section features will allow to us to disentangle the different components of backgrounds and estimate their level in the experimental area. The time-energy calibration will be determined and monitored with a set of monoenergetic filters as well as by the measurements of elements with resonance-dominated cross sections. Finally, in this initial phase the behaviour of several detectors scheduled in successive measureme...

  5. Temperature dependence of o-Ps annihilation lifetime in non-uniform cylindrical pores in comparison with ETE model

    Energy Technology Data Exchange (ETDEWEB)

    Khaghani, Morteza, E-mail: m.khaghani@pgs.usb.ac.ir; Mehmandoost-Khajeh-Dad, Ali Akbar, E-mail: mehmandoost@phys.usb.ac.ir

    2017-04-01

    Highlights: • Using the well known multi-physics program COMSOL calculating o-Ps annihilation lifetime in complex geometries. • Investigation of shape non-uniformity of cylindrical pores on o-Ps annihilation lifetime. • Verifying temperature dependency of o-Ps lifetime in non-uniform cylindrical pores. • Suggesting PALS at low temperature as a method to verify pore uniformity in porous material. - Abstract: Ortho-positronium (o-Ps) annihilation lifetime was calculated in non-uniform cylinder-shaped pores by solving Schrodinger equation using a well-known multi-physics program called COMSOL. The o-Ps annihilation lifetime variation in terms of temperature was calculated on the basis of ETE model via a numerical method. The COMSOL simulations indicate that as long as the pore is uniform cylinder-shaped, the results agree with those of two-dimensional ETE model, whereas deformations in the cylinder shape (indentation or protrusion) change the temperature behavior of ETE model and, thereby, higher values are predicted for o-Ps lifetime in the pore at lower temperatures. The geometry of the non-uniform cylinder-shaped pores, which is accompanied by empirical evidence, can be used for the analysis of empirical results obtained from positron lifetime spectroscopy in different temperatures.

  6. The CERN SPS proton–antiproton collider

    CERN Document Server

    Schmidt, Rudiger

    2016-01-01

    One of CERN's most ambitious and successful projects was the search for the intermediate bosons, W and Z [1]. The accelerator part of the project relied on a number of innovations in accelerator physics and technology. The invention of the method of stochastic cooling and the extension by many orders of magnitude beyond the initial proof of principle demonstration allowed the construction of the Antiproton Accumulator. Major modifications to the 26 GeV PS complex and the conversion of the 300 GeV SPS, which had just started up as an accelerator, to a collider were required. The SPS collider had to master the beam–beam effect far beyond limits reached before and had to function in a tight symbiosis with the UA1 and UA2 experiments.

  7. High duty factor plasma generator for CERN's Superconducting Proton Linac.

    Science.gov (United States)

    Lettry, J; Kronberger, M; Scrivens, R; Chaudet, E; Faircloth, D; Favre, G; Geisser, J-M; Küchler, D; Mathot, S; Midttun, O; Paoluzzi, M; Schmitzer, C; Steyaert, D

    2010-02-01

    CERN's Linac4 is a 160 MeV linear accelerator currently under construction. It will inject negatively charged hydrogen ions into CERN's PS-Booster. Its ion source is a noncesiated rf driven H(-) volume source directly inspired from the one of DESY and is aimed to deliver pulses of 80 mA of H(-) during 0.4 ms at a 2 Hz repetition rate. The Superconducting Proton Linac (SPL) project is part of the luminosity upgrade of the Large Hadron Collider. It consists of an extension of Linac4 up to 5 GeV and is foreseen to deliver protons to a future 50 GeV synchrotron (PS2). For the SPL high power option (HP-SPL), the ion source would deliver pulses of 80 mA of H(-) during 1.2 ms and operate at a 50 Hz repetition rate. This significant upgrade motivates the design of the new water cooled plasma generator presented in this paper. Its engineering is based on the results of a finite element thermal study of the Linac4 H(-) plasma generator that identified critical components and thermal barriers. A cooling system is proposed which achieves the required heat dissipation and maintains the original functionality. Materials with higher thermal conductivity are selected and, wherever possible, thermal barriers resulting from low pressure contacts are removed by brazing metals on insulators. The AlN plasma chamber cooling circuit is inspired from the approach chosen for the cesiated high duty factor rf H(-) source operating at SNS.

  8. Feasibility Study of the PS Injection for 2 GeV LIU Beams with an Upgraded KFA-45 Injection Kicker System Operating in Short Circuit Mode

    CERN Document Server

    Kramer, Thomas; Borburgh, Jan; Ducimetière, Laurent; Feliciano, Luis; Ferrero Colomo, Alvaro; Goddard, Brennan; Sermeus, Luc

    2016-01-01

    Under the scope of the LIU project the CERN PS Booster to PS beam transfer will be modified to match the requirements for the future 2 GeV beams. This paper describes the evaluation of the proposed upgrade of the PS injection kicker. Different schemes of an injection for LIU beams into the PS have been outlined in the past already under the aspect of individual transfer kicker rise and fall time performances. Homogeneous rise and fall time requirements in the whole PSB to PS transfer chain have been established which allowed to consider an upgrade option of the present injection kicker system operated in short circuit mode. The challenging pulse quality constraints require an improvement of the flat top and post pulse ripples. Both operation modes, terminated and short circuit mode are analysed and analogue circuit simulations for the present and upgraded system are outlined. Recent measurements on the installed kickers are presented and analysed together with the simulation data. First measurements verifying...

  9. LHC Report: imaginative injectors

    CERN Multimedia

    Pierre Freyermuth for the LHC team

    2016-01-01

    A new bunch injection scheme from the PS to the SPS allowed the LHC to achieve a new peak luminosity record.   Figure 1: PSB multi-turn injection principle: to vary the parameters during injection with the aim of putting the newly injected beam in a different region of the transverse phase-space plan. The LHC relies on the injector complex to deliver beam with well-defined bunch populations and the necessary transverse and longitudinal characteristics – all of which fold directly into luminosity performance. There are several processes taking place in the PS Booster (PSB) and the Proton Synchrotron (PS) acting on the beam structure in order to obtain the LHC beam characteristics. Two processes are mainly responsible for the beam brightness: the PSB multi-turn injection and the PS radio-frequency (RF) gymnastics. The total number of protons in a bunch and the transverse emittances are mostly determined by the multi-turn Booster injection, while the number of bunches and their time spacin...

  10. 1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

    International Nuclear Information System (INIS)

    Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

    1975-01-01

    Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

  11. Space charge and working point studies in the CERN Low Energy Ion Ring

    CERN Document Server

    Huschauer, A; Hancock, S; Kain, V

    2017-01-01

    The Low Energy Ion Ring (LEIR) is at the heart ofCERN’s heavy ion physics programme and was designed toprovide the high phase space densities required by the exper-iments at the Large Hadron Collider (LHC). LEIR is the firstsynchrotron of the LHC ion injector chain and it receives aquasi-continuous pulse of lead ions (Pb54+) from Linac3, ex-ploiting a sophisticated multi-turn injection scheme in bothtransverse and longitudinal planes. Seven of these pulses areinjected and accumulated, which requires continuous elec-tron cooling (EC) at low energy to decrease the phase spacevolume of the circulating beam in between two injections.Subsequently, the coasting beam is adiabatically capturedin two bunches, which are then accelerated and extractedtowards the Proton Synchrotron (PS). Figure 1 shows theLEIR magnetic cycle and the different steps required forbeam production.

  12. IT Services availability during CERN annual closure Dec 2004-Jan2005

    CERN Multimedia

    2004-01-01

    Mail, CERN Windows (NICE), Web services, LXPLUS, LXBATCH, AFS, Automated tape devices, Castor, Backups, software license servers, Sundev, CVS and Print Servers, CDS Search, Submit and Agenda, InDiCo, EDMS (in collaboration with TS Department), CMS disc servers, the AB NFS servers (SLNFS1, PSNFS1 and MTBNFS1, that PS group runs for AB Department), Campus Network, Remedy, and Security services will be available during the CERN annual closure. The physics database cluster, replication location service as well as accdb, cerndb and admsdb are the only databases available; CCDB will be closed for public access. Problems developing on scheduled services should be addressed within about half a day except around Christmas Eve and Christmas Day (24 and 25 December) and New Year's Eve and New Year's Day (31 December and 1st January). For Administrative Computing Services, ERT (Electronic Recruitment Tool) will be the only service operational; all other AIS applications such as EDH, CET, HRT etc. will be unavailable. Al...

  13. Britain at CERN

    CERN Multimedia

    2000-01-01

    H. E. Mr Christopher Hulse, Ambassador of United Kingdom in Switzerland, CERN Director General Luciano Maiani, Sir David Wright, Chief Executive of British Trade International and Roger Cashmore, CERN Director of research visit the Britain at CERN exhibition. From 14 to 17 November 30 British companies exhibited leading edge technologies at CERN. This is Britain's 18th exhibition at CERN since 1968. Out of the 30 companies, which attended the Britain at CERN exhibition in 1998, 25 have received an order or a contract relating to CERN during the last two years. The exhibition was inaugurated on Tuesday by Sir David Wright, Chief Executive of British Trade International. He was accompanied by H.E. Mr Christopher Hulse CMG, OBE, Her Majesty's Ambassador to Switzerland, and Mr. David Roberts, Deputy Head of Mission and Director of Trade Promotion at the British Embassy in Bern. CERN Director-General, Professor Luciano Maiani, underlined the major contribution of British physicists to CERN, pointing out the fact ...

  14. Asymmetric PS-block-(PS-co-PB)-block-PS block copolymers: morphology formation and deformation behaviour

    International Nuclear Information System (INIS)

    Adhikari, Rameshwar; Huy, Trinh An; Buschnakowski, Matthias; Michler, Goerg H; Knoll, Konrad

    2004-01-01

    Morphology formation and deformation behaviour of asymmetric styrene/butadiene triblock copolymers (total polystyrene (PS) content ∼70%) consisting of PS outer blocks held apart by a styrene-co-butadiene random copolymer block (PS-co-PB) each were investigated. The techniques used were differential scanning calorimetry, transmission electron microscopy, uniaxial tensile testing and Fourier-transform infrared spectroscopy. A significant shift of the phase behaviour relative to that of a neat symmetric triblock copolymer was observed, which can be attributed to the asymmetric architecture and the presence of PS-co-PB as a soft block. The mechanical properties and the microdeformation phenomena were mainly controlled by the nature of their solid-state morphology. Independent of morphology type, the soft phase was found to deform to a significantly higher degree of orientation when compared with the hard phase

  15. 30 CERN

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1984-11-15

    September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers.

  16. Microprocessor-based system for continuous monitoring of radiation levels around the CERN PS and PSB accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Agoritsas, V.; Beck, F.; Benincasa, G.P.; Bovigny, J.P.

    1986-06-01

    This paper describes a new beam loss monitor system which has been installed in the PS and PSB machines, replacing an earlier system. The new system is controlled by a microprocessor which can operate independently of the accelerator control system, though setting up and central display are usually done remotely, using the standard control system facilities.

  17. Bienvenue au CERN !

    CERN Multimedia

    CERN Press Office. Geneva

    1998-01-01

    CERN, the Laboratory which invented the World-Wide Web has re-invented its public Web site. The new face of CERN has gone live at http://www.cern.ch/ Public . CERN's new Web pages have been designed to give visitors an informative introduction to the fascinating world of particle physics. For those whose whirl around the Web only allows a short stop, there's the 'CERN in two minutes' page.

  18. Synthesis of NiPS3 and CoPS and its hydrogen storage capacity

    International Nuclear Information System (INIS)

    Ismail, N.; Madian, M.; El-Meligi, A.A.

    2014-01-01

    Highlights: • Preparation of NiPS 3 and CoPS using solid state reaction. • Characterization of compounds using XRD, TEM, SEM and IR. • Measuring the compounds thermal stability. • Estimation of the hydrogen storage capacity. -- Abstract: Prepared CoPS and NiPS 3 are studied as new materials for hydrogen energy storage. Single phase of CoPS and NiPS 3 were grown separately in evacuated silicatube via solid state reaction at 650 °C with controlled heating rate 1 °C/min. X-ray diffraction patterns confirm the formation of the desired compounds. Both CoPS and NiPS 3 exhibited high thermal stability up to 700 °C and 630 °C, respectively. The morphology of the prepared samples was investigated using scanning electron microscopy and folded sheets appeared in the transmission electron microscopy. The samples were exposed to 20 bar applied hydrogen pressure at 80 K. Both compounds appear to have feasible hydrogen storage capacity. CoPS was capable to adsorb 1.7 wt% while NiPS 3 storage capacity reached 1.2 wt%

  19. CERN Rocks

    CERN Multimedia

    2004-01-01

    The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

  20. Heinrich Wahl, a central figure in direct CP violation research at CERN, retires

    CERN Multimedia

    2003-01-01

    All the necessary ingredients were there - laughs, scientific debate and a pinch of emotion - to make the «Festkolloquium», held in honour of Heinrich Wahl, an unqualified success. One by one, his colleagues, friends and former students took their turn on the rostrum in CERN's main auditorium to reminisce over the career, scientific contributions and leadership of this highly-respected physicist. For, believe it or not, after 34 years at the forefront of the Laboratory's charge-parity violation experiments, Heinrich Wahl, is finally retiring from CERN. Heinrich Wahl during the Colloquium for his retirement.Heinrich Wahl came to CERN from his native Germany as a Fellow in 1969 and rapidly made a name for himself in the first CP violation experiments on neutral kaons, a field that would subsequently become his main area of interest. He then became involved in the CDHS (CERN Dortmund Heidelberg Saclay) experiment to study high-energy neutrino interactions, which began in 1976 under the leadership of Jack Stein...

  1. Measurements and FLUKA Simulations of Bismuth, Aluminium and Indium Activation at the upgraded CERN Shielding Benchmark Facility (CSBF)

    Science.gov (United States)

    Iliopoulou, E.; Bamidis, P.; Brugger, M.; Froeschl, R.; Infantino, A.; Kajimoto, T.; Nakao, N.; Roesler, S.; Sanami, T.; Siountas, A.; Yashima, H.

    2018-06-01

    The CERN High energy AcceleRator Mixed field (CHARM) facility is situated in the CERN Proton Synchrotron (PS) East Experimental Area. The facility receives a pulsed proton beam from the CERN PS with a beam momentum of 24 GeV/c with 5·1011 protons per pulse with a pulse length of 350 ms and with a maximum average beam intensity of 6.7·1010 protons per second. The extracted proton beam impacts on a cylindrical copper target. The shielding of the CHARM facility includes the CERN Shielding Benchmark Facility (CSBF) situated laterally above the target that allows deep shielding penetration benchmark studies of various shielding materials. This facility has been significantly upgraded during the extended technical stop at the beginning of 2016. It consists now of 40 cm of cast iron shielding, a 200 cm long removable sample holder concrete block with 3 inserts for activation samples, a material test location that is used for the measurement of the attenuation length for different shielding materials as well as for sample activation at different thicknesses of the shielding materials. Activation samples of bismuth, aluminium and indium were placed in the CSBF in September 2016 to characterize the upgraded version of the CSBF. Monte Carlo simulations with the FLUKA code have been performed to estimate the specific production yields of bismuth isotopes (206 Bi, 205 Bi, 204 Bi, 203 Bi, 202 Bi, 201 Bi) from 209 Bi, 24 Na from 27 Al and 115 m I from 115 I for these samples. The production yields estimated by FLUKA Monte Carlo simulations are compared to the production yields obtained from γ-spectroscopy measurements of the samples taking the beam intensity profile into account. The agreement between FLUKA predictions and γ-spectroscopy measurements for the production yields is at a level of a factor of 2.

  2. CERN Choir

    CERN Multimedia

    Staff Association

    2015-01-01

      Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

  3. 30 CERN

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers

  4. The PrPS4 type structure and a filled variant: the compounds TbPS4 and LiEuPS4

    International Nuclear Information System (INIS)

    Joergens, S.; Alili, L.; Mewis, A.

    2005-01-01

    Colourless single crystals of TbPS 4 (a = 10.696(2), c = 19.053(4) Aa) were obtained by reaction of the elements (750 C; 30 h). The compound crystallizes with the PrPS 4 type structure (I4 1 /acd; Z = 16). The structure consists of isolated PS 4 tetrahedra each surrounded by four Tb 3+ cations. Both crystallographically different Tb 3+ cations are coordinated by eight sulfur atoms which are part of four PS 4 tetrahedra. Orange single crystals of LiEuPS 4 (a = 11.498(2), c = 19.882(4) Aa) were prepared by reaction of Eu and P with Li 2 S 4 (700 C; 20 h). The crystal structure corresponds to the PrPS 4 type, in which tubes running along [001] are occupied by Li atoms, which are surrounded by four S atoms in strongly distorted tetrahedra. LiS 4 and PS 4 tetrahedra are connected via common edges into alternating chains. (orig.)

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Hands-On Object-Oriented and Generic Programming in C++\t3-Nov-09\t6-Nov-09 Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-...

  6. Europe joins the race to turn the Internet into one vast computer

    CERN Multimedia

    Butler, D

    2000-01-01

    CERN is coordinating an European proposal to design internet and software protocols to turn the internet into a single gigantic computer - a 'grid'. The impetus has come from the challenges surrounding the analysis of the vast amounts of data which will be generated by the LHC (1 page).

  7. Experiments at CERN in 1988

    International Nuclear Information System (INIS)

    1988-11-01

    This book is a compilation of the current experimental programme at CERN. The experiments listed are being performed at one of the following machines: The Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro Cyclotron (SC). The four experiments planned for the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experimental areas at the different machines appear at the beginning of the report. The experiments are briefly described and a schematic layout of each apparatus is included together with lists of participants and institutions. The status of the experiments (preparation/data-taking/completed) corresponds to the situation at the end of 1988. The 'completed' status means that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all the experiments published in these books since 1974 is given at the end. (orig./HSI)

  8. ATLAS at the CERN Open Day

    CERN Multimedia

    Burckhart, H.; Potter, C.; Schmid, P.; Schuh, S.

    The CERN Open Day celebrating the 50th anniversary has been a big success. More than 30000 visitors came to discover CERN's activities at 50 different sites. ATLAS showed the assemblies in hall 180, the test-beam set-up in the North Area hall and - apparently one of the biggest attractions of all - the cavern and the control room at our pit. Technical Coordination put a lot of effort into preparing the visit itinerary at Point 1 and by operating both lifts during the entire day without interruption almost 4000 visitors got the chance to see this impressive hall and the first pieces of the detector already down there. Some people even waited for more than an hour to have their turn - they remained in good spirits also thanks to videos presented to them standing in the queue and guides explaining the site. What impressed visitors most was the sheer size of our detectors: an estimated 5000 people came to see the toroids and the LAr calorimeters in halls 180 and 191, where they could watch cosmic rays i...

  9. Emittance Measurements For Future LHC Beams Using The PS Booster Measurement Line

    CERN Document Server

    Abelleira, Jose; Mikulec, Bettina; Di Giovanni, Gian Piero; CERN. Geneva. ATS Department

    2017-01-01

    The CERN PS Booster measurement line contains three pairs of SEM grids separated by drift space that measures the beam size in both planes. The combined analysis of these grids allows calculating a value for the transverse beam emittances. The precision of such a measurement depends on the ratio of RMS beam size and wire spacing. Within the LIU-PSB upgrade the extraction kinetic energy of the PSB will be increased from the current 1.4 GeV to 2.0 GeV. This will result in smaller transverse beam sizes for some of the future beams. The present layout of the transverse emittance measurement line is reviewed to verify if it will satisfy future requirements.

  10. Collide@CERN Geneva

    CERN Multimedia

    CERN. Geneva; Kieffer, Robert; Blas Temino, Diego; Bertolucci, Sergio; Mr. Decelière, Rudy; Mr. Hänni, Vincent

    2014-01-01

    CERN, the Republic and Canton of Geneva, and the City of Geneva are delighted to invite you to “Collide@CERN Geneva Music”. Come to the public lecture about collisions between music and particle physics by the third winners of Collide@CERN Geneva, Vincent Hänni & Rudy Decelière, and their scientific inspiration partners, Diego Blas and Robert Kieffer. The event marks the beginning of their residency at CERN, and will be held at the CERN Globe of Science and Innovation on 16 October 2014 at 19.00. Doors will open at 18.30.

  11. CERN Photo club

    CERN Multimedia

    CERN Photo club

    2016-01-01

    The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

  12. CERN Cricket Club

    CERN Multimedia

    CERN Cricket Club

    2010-01-01

    CERN Cricket Club Match Reports The cricket season is well under way, despite the weather, and several matches have been played. The match reporters have, however, found it too difficult to limit their reports to ¼ of a page, hence the reports have not appeared in the bulletin. All reports can be found at http://cern.ch/Club-Cricket/reports/reports.html The list of forthcoming matches can be consulted at http://cern.ch/Club-Cricket/fixtures.html Further information about the CERN Cricket Club can be found at http://cern.ch/Club-Cricket/

  13. Growing expertise in Africa: CERN-UNESCO's 3rd Digital Library School

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    The third in the series of CERN-UNESCO African Schools on Digital Libraries took place in Dakar, Senegal, in November last year. The School represents an important opportunity for CERN to contribute to a global exchange of knowledge, skills and culture.   Ludmila Marian assisting participants during a hands-on computer session. More photographs available here. After Rwanda and Morocco, this time it was Senegal's turn to host the Digital Library School, the third of its kind, held from 21 to 25 November 2011. Participants from seven African French-speaking countries met at the Université Cheikh Anta Diop in Dakar to learn about digital libraries and the importance of new technologies in the dissemination of knowledge by libraries. The School outlined the principles of digital information management and showcased the Invenio software, developed by CERN to manage digital libraries and freely available as Open Source software. The series of Schools, which combine in...

  14. Conceptual design of the SPL II A high-power superconducting $H^-$ linac at CERN

    CERN Document Server

    Baylac, M; Benedico-Mora, E; Caspers, Friedhelm; Chel, S; Deconto, J M; Duperrier, R; Froidefond, E; Garoby, R; Hanke, K; Hill, C; Hori, M; Inigo-Golfin, J; Kahle, K; Kroyer, T; Küchler, D; Lallement, J B; Lindroos, M; Lombardi, A M; López Hernández, A; Magistris, M; Meinschad, T; Millich, Antonio; Noah-Messomo, E; Pagani, C; Palladino, V; Paoluzzi, M; Pasini, M; Pierini, P; Rossi, C; Royer, J P; Sanmartí, M; Sargsyan, E; Scrivens, R; Silari, M; Steiner, T; Tückmantel, Joachim; Uriot, D; Vretenar, M

    2006-01-01

    An analysis of the revised physics needs and recent progress in the technology of superconducting RF cavities have led to major changes in the speci cation and in the design for a Superconducting Proton Linac (SPL) at CERN. Compared with the rst conceptual design report (CERN 2000–012) the beam energy is almost doubled (3.5 GeV instead of 2.2 GeV), while the length of the linac is reduced by 40% and the repetition rate is reduced to 50 Hz. The basic beam power is at a level of 4–5MW and the approach chosen offers enough margins for upgrades. With this high beam power, the SPL can be the proton driver for an ISOL-type radioactive ion beam facility of the next generation (`EURISOL'), and for a neutrino facility based on superbeam C beta-beam or on muon decay in a storage ring (`neutrino factory'). The SPL can also replace the Linac2 and PS Booster in the low-energy part of the CERN proton accelerator complex, improving signi cantly the beam performance in terms of brightness and intensity for the bene t of al...

  15. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - French C++ Programming Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09 - 7-Oct-09 - English Emacs - way beyond Text Editing\t29-Oct-09 - 29-Oct-09 - English Hands-On Object-Oriented and Generic Programming in C++ - 3-Nov-09 - 6-Nov-09 Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - English JAVA - Level 1\t12-Oct-09 - 14-Oct-09 - English JAVA - Level 2 - 16-Nov-09\t19-Nov-09 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - English JCOP...

  16. CERN honours Georges Charpak

    CERN Multimedia

    2009-01-01

    CERN pays tribute to the work of Georges Charpak at a colloquium in honour of his 85th birthday. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-Multirate-200-to-753-kbps-480x360.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-posterframe-480x360-at-10-percent.jpg', '1167500', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); Watch the video conference of Georges Charpak.   On 9 March CERN’s Main Auditorium was the venue for a fascinating and moving celebration marking the 85th birthday of Georges Charpak, who was awarded the Nobel Prize for Physics in 1992 for his inven...

  17. CERN Video News

    CERN Document Server

    2003-01-01

    From Monday you can see on the web the new edition of CERN's Video News. Thanks to a collaboration between the audiovisual teams at CERN and Fermilab, you can see a report made by the American laboratory. The clip concerns the LHC magnets that are being constructed at Fermilab. Also in the programme: the spectacular rotation of one of the ATLAS coils, the arrival at CERN of the first American magnet made at Brookhaven, the story of the discovery 20 years ago of the W and Z bosons at CERN. http://www.cern.ch/video or Bulletin web page.

  18. Britain at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1996-01-01

    On 8 October, H.E. Mr David Beattie, British Ambassador to Switzerland, Mr John R. Nichols, H.M. Consul-General in Geneva and, Prof. Christopher Llewellyn Smith, CERN*'s Director General, formally opened the industrial exhibition of thirty-three British hi-tech companies at CERN, which takes place from 8 to 11 October, 1996. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

  19. Young Artists@ CERN

    CERN Multimedia

    2004-01-01

    In view of 50th anniversary of CERN, about 20 young artists will be visiting CERN from 26 to 31 January to learn about the laboratory's research and the mysterious world of particle physics. The impressions they take home will be the main inspiration for the artwork they will then produce for an exhibition to be inaugurated in October 2004 as part of CERN's 50th anniversary celebration. We are looking for scientists who are interested in the Art-Science synergy and who can volunteer to discuss their work at CERN to these young artists during this week (25-31/01). Please contact renilde.vanden.broeck@cern.ch if you are interested. The project is called Young Artists@ CERN and for more information look at this website: http://www.hep.ucl.ac.uk/~andy/CERNart/

  20. The CERN Control Centre Setting Standards for the 21st Century

    CERN Document Server

    Manglunki, Django

    2008-01-01

    In 2003, CERN decided to build a unified control centre to replace four of its control rooms: the â€ワMeyrin Control Room” which controlled the PS complex, the â€ワPrevessin Control Room” (PCR) which controlled the SPS and until 2000 LEP, the Technical Control Room (TCR), and the Cryogenics Control Room (QCR). After first contemplating a possible implementation next to the â€ワGlobe of Science and Innovation”, it was decided for budgetary reasons to build the new CERN Control Centre (CCC) on the same location as the PCR. This represented a 50% saving in construction costs as most of the technical infrastructure (computer network, water, electricity, ventilation) was already in place, but added stringent time constraints: civil engineering could not begin before the SPS shutdown in November 2004, yet the room had to be ready for the accelerator operations to resume in March 2006. Although this presented a strict construction schedule, it allowed the project to be completely driven by th...

  1. CERN Table Tennis Club

    CERN Multimedia

    CERN Table Tennis Club

    2014-01-01

    CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

  2. People and things. CERN Courier, Dec 1995, v. 35(9)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-12-15

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: José Mariano Gago, president of LIP, the national Laboratory for experimental high energy physics and related research and development projects, in Lisbon becomes Portuguese Minister of Science and Technology. As well as being a prominent Portuguese particle physicist, Professor Gago is well known at CERN and played a vital role in his country's becoming a CERN Member State from 1986. (For a report on CERN-Portugal affairs, see September, page 22.) CERN Research Director from 1989- 93, Walter Hoogland left CERN in October to return to the Dutch NIKHEF Laboratory. Director General Chris Llewellyn Smith recalled Walter Hoogland's valuable contributions in strengthening ties between CERN and non-Member States anxious to participate in CERA/'S experimental programme, and in the establishment of the Detector Research and Development Committee which blazed a trail for work towards LHC detectors. Brian Foster of Bristol has been invited to serve for the period from 1 September to 31 December 1995 as a member and for the period 1 January to 31 August 1998 as Chairman of the UK Particle Physics and Astronomy Research Council's Particle Physics Committee, succeeding David Saxon.; Aldo Michelini retires: Following a successful and wide ranging career at the forefront of particle physics, Aldo Michelini formally retired from CERN at the end of October. He joined CERN in 1960, following a series of experiments with tracking chambers, including some time with Jack Steinberger's group in Columbia. At CERN, he first worked on the CERN Wilson chamber, which now performs valuable service as an aquarium! Four years later, he led a CERN/ETH Zurich/IC London collaboration studying strong interactions using a then novel approach - spark chambers in a large magnet. From 1969 - 73, he led the Omega spectrometer

  3. People and things. CERN Courier, Dec 1995, v. 35(9)

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: José Mariano Gago, president of LIP, the national Laboratory for experimental high energy physics and related research and development projects, in Lisbon becomes Portuguese Minister of Science and Technology. As well as being a prominent Portuguese particle physicist, Professor Gago is well known at CERN and played a vital role in his country's becoming a CERN Member State from 1986. (For a report on CERN-Portugal affairs, see September, page 22.) CERN Research Director from 1989- 93, Walter Hoogland left CERN in October to return to the Dutch NIKHEF Laboratory. Director General Chris Llewellyn Smith recalled Walter Hoogland's valuable contributions in strengthening ties between CERN and non-Member States anxious to participate in CERA/'S experimental programme, and in the establishment of the Detector Research and Development Committee which blazed a trail for work towards LHC detectors. Brian Foster of Bristol has been invited to serve for the period from 1 September to 31 December 1995 as a member and for the period 1 January to 31 August 1998 as Chairman of the UK Particle Physics and Astronomy Research Council's Particle Physics Committee, succeeding David Saxon.; Aldo Michelini retires: Following a successful and wide ranging career at the forefront of particle physics, Aldo Michelini formally retired from CERN at the end of October. He joined CERN in 1960, following a series of experiments with tracking chambers, including some time with Jack Steinberger's group in Columbia. At CERN, he first worked on the CERN Wilson chamber, which now performs valuable service as an aquarium! Four years later, he led a CERN/ETH Zurich/IC London collaboration studying strong interactions using a then novel approach - spark chambers in a large magnet. From 1969 - 73, he

  4. CERN Medtech:Hackathon

    CERN Multimedia

    Olofsson, Simon

    2018-01-01

    The CERN Medtech:Hackathon, organised by CERN Knowledge Transfer, was held in IdeaSquare during 6-9 April. Teams from all around the world gathered, by using CERN technology, to solve problems posed by the Medtech industry.

  5. CERN in 2030

    CERN Multimedia

    Laëtitia Pedroso

    2011-01-01

    A competition will soon be launched to select the architect, urban planner or landscape designer to undertake the first phase of redevelopment of the parking area by the flagpoles, between Entrances A and B. This will be the first stage in a wider development project aimed at sprucing up the CERN site and enhancing its image. Work to create a pleasant and harmonious area at the CERN entrance will start in 2013 while preparatory work for other developments inside the CERN site has already begun…   CERN as it is today.  By 2030, CERN will be a greener place, much like a university campus. The arrival of the tramway on 30 April will be an opportunity to forge ahead with the urban plan aimed at rejuvenating the CERN site and redefining how it is organised. "Nearly sixty years after CERN's first buildings went up, this plan will help transform the site and give it a welcoming, friendly face, a bit like a university campus," explains Thierry Chanard, urban plannin...

  6. Germany at CERN

    CERN Multimedia

    2005-01-01

    From left to right: Maximilian Metzger, CERN's Secretary-General, Hermann Schunck, Director at the German Federal Ministry of Education and Research, and Robert Aymar, CERN's Director-General, talking to Wolfgang Holler from Butting, one of the companies at the "Germany at CERN" exhibition. Far right : Susanne-Corinna Langer-Greipl from BMBF, delegate to the CERN Finance Committee. For three days, CERN's Main Building was transformed into a showcase for German industry. Twenty-nine companies from sectors related to particle physics (electrical engineering, vacuum and low temperature technology, radiation protection, etc.) were here for the ninth "Germany at CERN" exhibition, organised by the German Federal Ministry of Education and Research (BMBF), which gave them the opportunity to meet scientists and administrators from the Laboratory. On 1 March the exhibition was visited by a German delegation headed by Dr Hermann Schunck, Director at BMBF.

  7. France at CERN

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Rolf Heuer, CERN Director General, visits the exhibition "La France au CERN". The exhibition France at CERN, organized by UBIFRANCE in collaboration with CERN's GS/SEM (Site Engineering and Management) service, took place from Monday 7 to Wednesday 9 June in the Main Building. The 36 French firms taking part came to present their products and technologies related to the Organization's activities. The next exhibition will be "Netherlands at CERN" in November.

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEnglish JAVA...

  9. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEng...

  10. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

  11. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

  12. A microprocessor-based system for continuous monitoring of radiation levels around the CERN PS and PSB accelerators

    Science.gov (United States)

    Agoritsas, V.; Beck, F.; Benincasa, G. P.; Bovigny, J. P.

    1986-06-01

    This paper describes a new beam loss monitor system which has been installed in the PS and PSB machines, replacing an earlier system. The new system is controlled by a microprocessor which can operate independently of the accelerator control system, though setting up and central display are usually done remotely, using the standard control system facilities.

  13. Threedimensional system of coordinates used at CERN

    International Nuclear Information System (INIS)

    Gervaise, J.; Mayoud, M.; Menant, E.

    1976-01-01

    This report is a complete account of the transformations and corrections necessary for geodetic quantities, whether directly measured or derived, before they can be entered into calculations involving the basic reference system used at CERN. A special type of projection (orthographic projection) has been developed, with the aim that it be the best possible for the geodetic system employed for the Super Proton Synchrotron (SPS) whilst retaining the basic possibilities provided for the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The coordinate system in which the geometry of particle beams is defined is necessarily Cartesian. This feature, although mathematically simple, has a number of consequences for the treatment of measurements which are physically connected with the shape of the Earth. Details of the orthographic projection, the planimetry, and the altimetry are given. (Author) [fr

  14. CERN Shop Christmas Sale

    CERN Multimedia

    Visits & Exhibition Service/ETT-VE

    2001-01-01

    11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

  15. Two-pion correlation measurements in 450 GeV/c p-A collisions at the CERN SPS

    International Nuclear Information System (INIS)

    Miyabayashi, A.

    1995-06-01

    The Bose-Einstein correlation (interferometry) studies on two pions are carried out on the data obtained from the 450 GeV/C fixed target p-A experiments at the CERN SPS. THe multi-track event data sets for p-Be and p-W collisions at the NA34 (HELIOS/1) experiment and two track event data sets for p-Be, p-S and p-Pb collisions from the NA44 (Focusing spectrometer) are mainly employed in both the one and two dimensional analyses. The following investigations are made: (1) consistency in the interferometry analysis results on the p-Be data sets obtained from the two independent experiments. (2) comparison of the p-Be interactions with the p-p interactions to investigate the validity of a crude approximation of lower nucleus numbered p-A interactions to p-p interactions. (3) consistency study of different nominal spectrometer setting p-Pb data sets. (4) target dependence; relationships between geometrical target radii and parameters resulting from the correlation. (5) charged particle multiplicity density dependences of R t and R l parameters by means of a simple hydrodynamical picture of a freeze-out at a constant particle density. 89 refs

  16. CERN Photo Club (CPC) / Canon Contest - My View of CERN

    CERN Multimedia

    Steyaert, Didier

    2016-01-01

    The CERN Photo Club has organized in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016.

  17. What's new@CERN, episode 2

    CERN Multimedia

    CERN Video productions

    2011-01-01

    On Monday 7 November at 4pm in English and 4.20pm in French, watch "What's new@CERN" on webcast.cern.ch. In this second episode: LHC performance, a journey to the particle source and this past month's news.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-posterframe-640x360-at-30-percent.jpg', '1394250', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4');

  18. Doing business with CERN

    CERN Multimedia

    2015-01-01

    The Procurement Service, in collaboration with the Communications group’s Design team, has recently launched a new information campaign targeted at companies wishing to supply their products and services to CERN. This campaign comprises:   A brochure, available in hard and soft copy:  http://procurement.web.cern.ch/brochures/doing-business-with-cern.   A 6-minute video overview: https://procurement-dev.web.cern.ch/doing-business-with-cern. This campaign is intended for Member State firms with whom CERN is yet to do business. The key objectives are: To emphasise that CERN can be considered a major customer across a wide range of activities;   To present CERN’s procurement procedures in a dynamic and digestible way;   To highlight the information available on CERN’s procurement website: http://procurement.web.cern.ch. Furthermore, a new section called “Having a contract with CERN” is also now ava...

  19. Cosmic rays,Climate and the CERN CLOUD Experiment

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    For more than two centuries, scientists have been puzzled by observations of solar-climate variability yet the lack of any established physical mechanism. Some recent observations, although disputed, suggest that clouds may be influenced by cosmic rays, which are modulated by the solar wind. The CLOUD experiment aims to settle the question of whether or not cosmic rays have a climatically-significant effect on clouds by carrying out a series of carefully-controlled measurements in a large cloud chamber exposed to a beam from the CERN PS. This talk will present the scientific motivation for CLOUD and the first results, which have recently been published in Nature (Kirkby et al. (2011). Role of sulphuric acid, ammonia and galactic cosmic rays in atmospheric aerosol nucleation. Nature 476, 429-433).

  20. The CERN Library

    CERN Multimedia

    Hester, Alec G

    1968-01-01

    Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

  1. Development of a 64-channel 100 ps TDC module

    International Nuclear Information System (INIS)

    Liu Xiaohua; An Qi; Liu Shubin; Su Hong; Zhan Wenlong

    2009-01-01

    Multi-wire drift chamber at external target experiment in HIRFL-CSR measures drift time of charged particles to obtain the track information. A 64-channel TDC module hosting high density connectors and high performance TDC chips (HPTDC) are used to perform the time digitization. Data of the module is transferred to computer through PXI bus. The test results show that a 100 ps resolution has been achieved. (authors)

  2. Across Europe to CERN: Taking students on the ultimate physics experience

    Science.gov (United States)

    Wheeler, Sam

    2018-05-01

    In 2013, I was an Einstein Fellow with the U.S. Department of Energy and I was asked by a colleague, working in a senator's office, if I would join him in a meeting with a physicist to "translate" the science into something more understandable. That meeting turned out to be a wonderful opportunity I would never have otherwise had. During the meeting I met Michael Tuts, a physicist who was working on project ATLAS at CERN. Afterwards, I walked with him out of the Senate office building to Union Station and, in parting, he gave me his card and told me that if I were in Geneva that he could help me get a tour of CERN and the LHC.

  3. CERN Library | Author Talk: Quinn Slobodian | 15 April

    CERN Multimedia

    CERN Library

    2014-01-01

    Quinn Slobodian from the Dahlem Humanities Center, Freie Universität Berlin will give a presentation at the CERN Library about "The Laboratory of the World Economy: Globalization Theory around 1900".   Quinn Slobodian researches the history of Germany in the world with a focus on international political economy and transnational social movements. He is really interested to hear from CERN physicists and engineers about their responses to his theories about the Global Economy at the turn of the century: We may think of globalization theory as a recent phenomenon. Yet in the decades around 1900, German-speaking economists were already trying to make sense of an entity they called “the world economy,” coining a term that would not enter other languages until after the First World War. What was the nature of the world economy? How could one visualize and represent it? What was the status of national autonomy in an era of globalized communication and trad...

  4. How to avoid a Nightmare on CERN Street

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    You boot up your laptop and seek out the nearest secure Wi-Fi network. It’s the twenty-first century - surely there must be something available? But as the search continues and the spinning ball keeps on turning, you start to feel that slow creep of dread... unless, of course, you’re using Eduroam!   (Image: Unearthed Comics) “Eduroam is a secure, worldwide roaming Wi-Fi access service developed for the international research and education community*.” Put another way, Eduroam can save you from the frustration, misery and hopelessness you’d otherwise experience when trying to get your device online in a new location. It is simple, secure and – once you are connected – provides you with Internet access in universities and facilities around the world – including at CERN. With a simple click, CERN users can install Eduroam credentials onto their laptop, tablet or mobile device. These credentials act as a “maste...

  5. From the CERN web: knowledge transfer, sustainability, CERN openlab and more

    CERN Multimedia

    2015-01-01

    This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Previous successful Knowledge Transfer enterprises have helped to develop several useful technologies, such as these photonic crystals, which glow when high-energy charged particles pass through, and are used for medical imaging. New Knowledge Transfer website to grow CERN’s industry links 23 November – by Harriet Jarlett  CERN’s Knowledge Transfer Group has just launched a new tool to encourage CERN researchers and businesses to share their technologies, ideas and expertise. It’s hoped that by facilitating these exchanges the tool will inspire new ways to apply CERN technologies commercially, to help benefit industry and society. Continue to read…    The power station at CERN's Prévessin site. (Image: Margot Frenot/CERN). CERN an...

  6. Sub-100 ps coincidence time resolution for positron emission tomography with LSO:Ce codoped with Ca

    CERN Document Server

    Nemallapudi, Mythra Varun; Lecoq, Paul; Auffray, Etiennette; Ferri, Alessandro; Gola, Alberto; Piemonte, Claudio

    2015-01-01

    The coincidence time resolution (CTR) becomes a key parameter of 511keV gamma detection in time of flight positron emission tomography (TOF-PET). This is because additional information obtained through timing leads to a better noise suppression and therefore a better signal to noise ratio in the reconstructed image. In this paper we present the results of CTR measurements on two different SiPM technologies from FBK coupled to LSO:Ce codoped 0.4%Ca crystals. We compare the measurements performed at two separate test setups, i.e. at CERN and at FBK, showing that the obtained results agree within a few percent. We achieve a best CTR value of 85  ±  4 ps FWHM for 2  ×  2  ×  3 mm3 LSO:Ce codoped 0.4%Ca crystals, thus breaking the 100 ps barrier with scintillators similar to LSO:Ce or LYSO:Ce. We also demonstrate that a CTR of 140  ±  5 ps can be achieved for longer 2  ×  2  ×  20 mm3 crystals, which can readily be implemented in the current generation PET syst...

  7. CERN, Geneva

    CERN Multimedia

    2007-01-01

    "The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

  8. P-KTPx: Production and Certification of MWPC for LHCb Muon System at CERN

    CERN Multimedia

    2005-01-01

    - The Large Hadron Collider beauty experiment - Multi Wire Proportional Chambers (MWPC) in the LHCb Muon System - Design Parameters MWPC Production at CERN - Panel Production - Panel Wiring Chamber Certification - Gas Leak Test - Chamber Conditioning - Gas Gain Uniformity Test

  9. An annual performance appraisal for CERN

    CERN Multimedia

    2012-01-01

    The March Council session is the occasion for CERN’s annual performance appraisal, but instead of the MARS form familiar to CERN staff, the lab’s working document is an Annual Progress Report, linked to the Medium-Term Plan, matching achievements to objectives. This year, I think it’s fair to say, we were firmly able to tick the ‘achieved’ box.   Top of the list of objectives was the LHC, which exceeded expectations in 2011 by delivering over five times the anticipated luminosity for protons while improving the lead-ion integrated luminosity by an order of magnitude compared to 2010.  As a result, the experiments published over 190 papers and made a staggering 1900 conference presentations. Underpinning this was the Worldwide LHC Computing Grid, which routinely performs so well that we hardly notice it's there. Non-LHC physics also had its day in the sun in 2011, with experiments at the PS, SPS, AD, n_TOF and ISOLDE, as well ...

  10. New life for CERN's first accelerator

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    Building 300 right in the middle of the CERN site houses a special "antique": the Laboratory's very first accelerator. After several years in the wilderness following its decommissioning in 1990, the Synchrocyclotron is set to take on a new lease of life in the near future, this time as a visitor attraction.   The Synchrocyclotron as it was in 1975; it will be restored to this configuration for public viewing. The Synchrocyclotron (SC) began operation in 1957, two years before the PS was commissioned. Running at an energy of 600 MeV and producing beams of protons, neutrons, muons and pions, it helped to further research in the nuclear physics field for no fewer than 33 years, providing beams for various decay experiments as well as the muon capture experiment (*). Since the SC was decommissioned in 1990, three of its four buildings (160, 161 and 301) have been converted into offices for members of the ALICE collaboration, but the shielded hall housing the machine it...

  11. CERN n_TOF Facility: Performance Report

    CERN Document Server

    n_TOF, Collaboration

    2003-01-01

    This report describes the basic characteristics and the performances of the new neutron time-of-flight facility, n_TOF, recently set in operation at CERN. The report is divided into three parts. In the first part, a description of the characteristics of the installation, up to the experimental area (EAR-1) is presented. This includes the proton extraction line from the PS, the spallation module (the lead target and its cooling and moderation systems) and the neutron beam window. A description of the neutron time-of-flight line with the vacuum system, shielding and collimation is also included in this part. In the second part, matters related to safety issues, including radiation and dose estimates and measurements in the target area are discussed. In the third part, a description of the experimental set up in EAR-1 is presented. This includes the data acquisition systems, the beam monitoring systems and the detectors for capture and for fission measurements. The measurements performed in order to derive the m...

  12. Electrostatic septum for "Continuous Transfer" from PS to SPS

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    For "Continuous Transfer" to the SPS, the PS beam, after acceleration, is peeled off in 5 turns. To minimize losses, the magnetic septa are preceded by an electrostatic septum in straight section 31. We see the inner part of it, on a lab-bench. The first part consists of W-wires, the second part is a Mo-foil. The circulating beam passes through the opening, the ejected beam at the outside (above the wires, in this picture). This assembly is the anode-part, the cathode is not shown.

  13. The CERN's year; L'annee du CERN

    Energy Technology Data Exchange (ETDEWEB)

    Chadli, M. [Universite de Picardie Jules Verne, CREA, 80 - Amiens (France); Coppier, H. [Ecole Superieure d' Ingenieurs en Electrotechnique et Electronique d' Amiens - ESIEE Amiens, 80 - Amiens (France); Pezzeti, M. [Conseil Europeen pour la Recherche Nucleaire (CERN), Geneve (Switzerland)

    2007-12-15

    CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W{sup +}, W{sup -} and Z{sub 0} bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

  14. From the CERN web: Collide@CERN, Fermilab neutrinos and more

    CERN Multimedia

    2015-01-01

    This new section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Ruth Jarman and Joe Gerhardt. (Photo: Matthias H. Risse). Collide@CERN Ars Electronica Award goes to “Semiconductor” 10 August – Collide@CERN Ruth Jarman and Joe Gerhardt, two English artists collaborating under the name Semiconductor, are this year’s recipients of the Collide@CERN Ars Electronica Award. In the coming months, they will begin a two-month residency at CERN.  Continue to read…     Illustration: Fermilab/Sandbox Studio.   Fermilab experiment sees neutrinos change over 500 miles 7 August - Fermilab press release Scientists on the NOvA experiment saw their first evidence of oscillating neutrinos, confirming that the extraordinary detector built for the project not only functions as planned but is also making great p...

  15. Fast symplectic map tracking for the CERN Large Hadron Collider

    Directory of Open Access Journals (Sweden)

    Dan T. Abell

    2003-06-01

    Full Text Available Tracking simulations remain the essential tool for evaluating how multipolar imperfections in ring magnets restrict the domain of stable phase-space motion. In the Large Hadron Collider (LHC at CERN, particles circulate at the injection energy, when multipole errors are most significant, for more than 10^{7} turns, but systematic tracking studies are limited to a small fraction of this total time—even on modern computers. A considerable speedup is expected by replacing element-by-element tracking with the use of a symplectified one-turn map. We have applied this method to the realistic LHC lattice, version 6, and report here our results for various map orders, with special emphasis on precision and speed.

  16. CERN Relay Race

    CERN Multimedia

    Running Club

    2010-01-01

    This year’s CERN Relay Race will take place around the Meyrin site on Thursday 20th May at 12h00. This annual event is for teams of 6 runners covering distances of 1000m, 800m, 800m, 500m, 500m and 300m respectively. Teams may be entered in the Seniors, Veterans, Ladies, Mixed or Open categories. The registration fee is 10 CHF per runner, and each runner receives a souvenir prize. As usual, there will be a programme of entertainments from 12h in the arrival area, in front of the Restaurant no. 1. Drinks, food, CERN club information and music will be available for the pleasure of both runners and spectators. The race starts at 12h15, with results and prize giving at 13:15.   For details of the race, and of how to sign up a team, please visit: https://espace.cern.ch/Running-Club/CERN-Relay The event is organised by the CERN Running Club with the support of the CERN Staff Association.  

  17. CERN Pensioners Association

    CERN Multimedia

    The GAC Committee

    2004-01-01

    Open Day To all CERN retired staff As part of the celebrations organised for the 50th anniversary of CERN, an Open Day will be held on Saturday 16 October 2004. Anyone willing to act as a guide, either to help and inform visitors at the reception points or to guide groups of visitors, sharing your knowledge with them, is invited to fill in the attached form. A preparatory meeting will be arranged for those who left CERN some time ago and whose knowledge of the site may no longer be quite up-to-date. The Open Day organisers need your help, which will be very much appreciated. We hope that many pensioners will participate. People with internet access may enrol directly without coming to CERN, http://www.cern.ch/CERN50/openday The GAC Committee OPEN DAY : CALL FOR VOLUNTEERS 16th October 2004 So now you are excited about the Open Day, how can you participate? As you can imagine, for such a large number of activities, we need many volunteers. Please return the following form to Elena Battis...

  18. First β-beating measurement and optics analysis for the CERN Large Hadron Collider

    Directory of Open Access Journals (Sweden)

    M. Aiba

    2009-08-01

    Full Text Available Proton beams were successfully steered through the entire ring of the CERN Large Hadron Collider (LHC on September the 10th of 2008. A reasonable lifetime was achieved for the counterclockwise beam, namely beam 2, after the radiofrequency capture of the particle bunch was established. This provided the unique opportunity of acquiring turn-by-turn betatron oscillations for a maximum of 90 turns right at injection. Transverse coupling was not corrected and chromaticity was estimated to be large. Despite this largely constrained scenario, reliable optics measurements have been accomplished. These measurements together with the application of new algorithms for the reconstruction of optics errors have led to the identification of a dominant error source.

  19. The CPLEAR detector at CERN

    CERN Document Server

    Adler, R; Alhalel, T; Angelopoulos, Angelos; Apostolakis, Alcibiades J; Aslanides, Elie; Backenstoss, Gerhard; Bal, F; Bard, J P; Barraca, D; Bee, C P; Behnke, O; Benelli, A; Bennet, J; Bertin, V; Blanc, F; Bloch, P; Bonnet, M; Bula, C; Calzas, A; Carlson, P J; Carroll, M; Carvalho, J; Cawley, E; Charalambous, S; Chardalas, M; Chardin, G; Charra, P; Chertok, M B; Cody, A; Da Silva, J; Damianoglou, D; Daniel, R; Danielsson, M; Dechelette, Paul; Dedieu, M; Dedoussis, S; Dejardin, M; Derré, J; Dijksman, A; Dinkespiler, B; Dodgson, M; Dröge, M; Duclos, J; Dudragne, J; Durand, D; Ealet, A; Eckart, B; Eleftheriadis, C; Engster, Claude; Evangelou, I; Faravel, L; Fassnacht, P; Faure, J L; Felder, C; Ferreira-Marques, R; Fetscher, W; Fidecaro, Maria; Filipcic, A; Francis, D; Fry, J; Fuglesang, C; Gabathuler, Erwin; Gally, Y; Gamet, R; Garreta, D; Geiss, D; Geralis, R; Gerber, H J; Go, A; Gumplinger, P; Guyon, D; Guyot, C; Harrison, P; Harrison, P F; Haselden, A; Hayman, P J; Hazen, E S; Henry-Coüannier, F; Heyes, W G; Hollander, R W; Hubert, E; Jacobs, C; Jansson, K; Johner, H U; Jon-And, K; Karkour, N; Kérek, A; Kesseler, G; Kettle, P R; King, D; Klados, T; Kochowski, Claude; Kokkas, P; Kontek, K; Kreuger, R; Lawry, T; Lecouturier, T; Le Gac, R; Leimgruber, F; Linget, D; Liolios, A; Löfstedt, B; Louis, F; Machado, E; Maley, P; Mall, U; Mandic, I; Manthos, N; Marel, Gérard; Marin, C P; Martin, H; Michau, J C; Mikuz, M; Miller, J; Montanet, François; Nakada, Tatsuya; Nanni, F; Onofre, A; Pagels, B; Papadopoulos, I M; Pavlopoulos, P; Pelucchi, F; Petit, P; Philippoussis, K; Pinto da Cunha, J; Policarpo, Armando; Polivka, G; Postma, H; Rheme, C; Rickenbach, R; Roberts, B L; Rozaki, E; Ruf, T; Sacks, L; Sakelliou, L; Sanders, P; Santoni, C; Sarigiannis, K; Schäfer, M; Schaller, L A; Schietinger, T; Schopper, A; Schune, P; Soares, A; Steinacher, M; Tatsis, S; Tauscher, Ludwig; Thibault, C; Touchard, F; Touramanis, C; Triantis, F A; Tröster, D A; Tsamouranis, I; Tschopp, H; Tsilimigras, Panayiotis; Van Beveren, E; van Eijk, C W E; Van Koningsfeld, V; Vanuxem, J P; Varner, G S; Verweij, H; Vlachos, S; Warner, D; Watson, E; Weber, P; Wendler, H; Wigger, O; Witzig, C; Wolter, M; Yéche, C; Zavrtanik, D; Zimmerman, D

    1996-01-01

    The CPLEAR collaboration has constructed a detector at CERN for an extensive programme of CP-, T- and CPT-symmetry studies using ${\\rm K}^0$ and $\\bar{\\rm K}^0$ produced by the annihilation of $\\bar{\\rm p}$'s in a hydrogen gas target. The ${\\rm K}^0$ and $\\bar{\\rm K}^0$ are identified by their companion products of the annihilation ${\\rm K}^{\\pm} \\pi^{\\mp}$ which are tracked with multiwire proportional chambers, drift chambers and streamer tubes. Particle identification is carried out with a liquid Cherenkov detector for fast separation of pions and kaons and with scintillators which allow the measurement of time of flight and energy loss. Photons are measured with a lead/gas sampling electromagnetic calorimeter. The required antiproton annihilation modes are selected by fast online processors using the tracking chamber and particle identification information. All the detectors are mounted in a 0.44 T uniform field of an axial solenoid of diameter 2 m and length 3.6 m to form a magnetic spectrometer capable o...

  20. Experiments at CERN in 1985

    International Nuclear Information System (INIS)

    1985-11-01

    This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The four experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experiments at the various machines are given in the beginning of the report. The experiment goals and methods are briefly described and a schematic layout of the apparatus is included. Lists of participants and their institutions are also given. The status of the experiments (preparation, data-taking, completed) corresponds to the situation as of 1st November, 1985. ''Completed'' means only that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all experiments published in this book since 1975 is given at the end of the catalogue. (orig./HSI)

  1. CERN Holiday Gift Guide

    CERN Multimedia

    2013-01-01

    Do you have last-minute gifts to get? Stuck for ideas? The CERN Shop and the ATLAS and CMS secretariats have some wonderfully unique gifts and stocking-fillers for sale this year - perfect for the physics fanatics in your life. Let's take a look...   1. CERN Notebook, 10 CHF - 2. CERN Pop-up book, 30 CHF - 3. USB Stick 8GB, 25 CHF - 4. CERN Tumbler, 12 CHF 5. ATLAS 3D Viewer, 5 CHF - 6. ATLAS Puzzle, 15 CHF - 7. CMS Umbrella, 25 CHF   These gifts are all available at the CERN Shop, with the exception of the ATLAS 3D Viewer and the CMS umbrella, which are only available from the respective secretariats. Don’t forget! If you’re from CERN, you still have time to take advantage of a 10% off discount at the CERN shop. Offer ends 20 December.

  2. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming    25-MAY-10    28-MAY-10    English    3 days CERN openlab Multi-threading and Parallelism Workshop    04-MAY-10    05-MAY-10    English    2 days ITIL Foundations (version 3) EXAMINATION    29-APR-10    29-APR-10    English    1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans    21-JUN-10    23-JUN-10 &...

  3. EOS as the present and future solution for data storage at CERN

    CERN Document Server

    Peters, AJ; Adde, G

    2015-01-01

    EOS is an open source distributed disk storage system in production since 2011 at CERN. Development focus has been on low-latency analysis use cases for LHC(1) and non- LHC experiments and life-cycle management using JBOD(2) hardware for multi PB storage installations. The EOS design implies a split of hot and cold storage and introduced a change of the traditional HSM(3) functionality based workflows at CERN.The 2015 deployment brings storage at CERN to a new scale and foresees to breach 100 PB of disk storage in a distributed environment using tens of thousands of (heterogeneous) hard drives. EOS has brought to CERN major improvements compared to past storage solutions by allowing quick changes in the quality of service of the storage pools. This allows the data centre to quickly meet the changing performance and reliability requirements of the LHC experiments with minimal data movements and dynamic reconfiguration. For example, the software stack has met the specific needs of the dual computing centre set-...

  4. NA61/SHINE facility at the CERN SPS: beams and detector system

    CERN Document Server

    Abgrall, N.; Aduszkiewicz, A.; Ali, Y.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bogusz, M.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Efthymiopoulos, I.; Ereditato, A.; Fabich, A.; Feofilov, G.A.; Fodor, Z.; Fulop, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hierholzer, M.; Idczak, R.; Igolkin, S.; Ivashkin, A.; Jokovic, D.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kielczewska, D.; Kirejczyk, M.; Kisiel, J.; Kiss, T.; Kleinfelder, S.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Koversarski, P.; Kowalski, S.; Krasnoperov, A.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lyubushkin, V.V.; Maćkowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Maletic, D.; Manglunki, D.; Manic, D.; Marchionni, A.; Marcinek, A.; Marin, V.; Marton, K.; Mathes, H.J; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Messina, M.; Mrówczyński, St.; Murphy, S.; Nakadaira, T.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Paul, T.; Peryt, W.; Petukhov, O.; Pistillo, C.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Puławski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Röhrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczyński, M.; Sadovsky, A.; Sakashita, K.; Savic, M.; Schmidt, K.; Sekiguchi, T.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Sipos, R.; Skrzypczak, E.; Słodkowski, M.; Sosin, Z.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Stroebele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tolyhi, T.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarz, A.; Wyszyński, O.; Zambelli, L.; Zipper, W.

    2014-01-01

    NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March ...

  5. Three-dimensional coordinate system used at CERN

    International Nuclear Information System (INIS)

    Gervaise, J.; Mayoud, M.; Menant, E.

    1983-11-01

    This report is a detailed account of the transformations and corrections that must be applied to any geodetic quantity - whether directly observed or derived - before it can be introduced into calculations relating to the reference system of coordinates used at CERN. In particular, a type of projection, called orthographic projection, has been developed to be as well adapted as possible to the geodetic network of the Subterranean Proton Synchrotron (SPS), while preserving the basic possibilities of the other installations - i.e., the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The system in which the particle beam geometry is defined is necessarily cartesian. This feature, though mathematically simple, nevertheless has numerous consequences for the treatment of measurements that are physically connected to the shape of the earth. The calculations of the orthographic projection, the planimetry and the altimetry are presented in detail. 12 figures

  6. The CERN's year

    International Nuclear Information System (INIS)

    Chadli, M.; Coppier, H.; Pezzeti, M.

    2007-01-01

    CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W + , W - and Z 0 bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

  7. Integrity at CERN

    CERN Document Server

    Department, HR

    2015-01-01

    In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

  8. CernVM Online and Cloud Gateway: a uniform interface for CernVM contextualization and deployment

    International Nuclear Information System (INIS)

    Lestaris, G; Charalampidis, I; Berzano, D; Blomer, J; Buncic, P; Ganis, G; Meusel, R

    2014-01-01

    In a virtualized environment, contextualization is the process of configuring a VM instance for the needs of various deployment use cases. Contextualization in CernVM can be done by passing a handwritten context to the user data field of cloud APIs, when running CernVM on the cloud, or by using CernVM web interface when running the VM locally. CernVM Online is a publicly accessible web interface that unifies these two procedures. A user is able to define, store and share CernVM contexts using CernVM Online and then apply them either in a cloud by using CernVM Cloud Gateway or on a local VM with the single-step pairing mechanism. CernVM Cloud Gateway is a distributed system that provides a single interface to use multiple and different clouds (by location or type, private or public). Cloud gateway has been so far integrated with OpenNebula, CloudStack and EC2 tools interfaces. A user, with access to a number of clouds, can run CernVM cloud agents that will communicate with these clouds using their interfaces, and then use one single interface to deploy and scale CernVM clusters. CernVM clusters are defined in CernVM Online and consist of a set of CernVM instances that are contextualized and can communicate with each other.

  9. Tunnel Linking the CERN Sites: Discontinuation of the (small) 'Attestation CERN'

    CERN Multimedia

    Service des Relations avec les Pays-hôtes

    2004-01-01

    With effect from 1st June 2004, members of the personnel whose contracts with the Organization are too short for them to hold legitimation documents issued by the Host States will be required to carry only the following documents to use the Tunnel linking the CERN sites: their national identity card, if accepted by the French and Swiss regulations, or their passport (with a visa/visas if required by the French and/or Swiss regulations) and their blue CERN card (access card). The (small) 'Attestation CERN' (CERN certificate) issued by the Users Office or the Human Resources Department will no longer be required. This amendment to paragraph 10 b) and to Annex 3 of the Rules for Use of the Tunnel (ref. CERN/DSU-DO/RH/8200) is related to the addition of an expiry date on blue CERN cards, which has been compulsory since 1st January 2003, and to the recording of all relevant information in the database used for the systematic checking of tunnel users by means of card readers installed at the tunnel. Relations...

  10. Chiaro Networks' Enstara IP/MPLS platform selected by CERN for trans-Atlantic trial

    CERN Multimedia

    2004-01-01

    "Chiaro Networks, the developer of true infrastructure-class Internet Protocol/Multi-Protocol Label Switching (IP/MPLS) platforms, today announced that its Enstara router has been selected by the European Organization for Nuclear Research (CERN) for its DataTAG project" (1 page)

  11. CERN - better than science fiction!

    CERN Document Server

    2007-01-01

    From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN audiovisual service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN's Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer).

  12. The 1956 CERN Symposium

    CERN Document Server

    Jarlskog, Cecilia

    2014-01-01

    CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

  13. CERN: Digitally open, too

    CERN Multimedia

    Computer Security Team

    2013-01-01

    The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

  14. The TDCpix readout ASIC: A 75ps resolution timing front-end for the NA62 Gigatracker hybrid pixel detector

    CERN Document Server

    Kluge, A; Bonacini, S; Jarron, P; Kaplon, J; Morel, M; Noy, M; Perktold, L; Poltorak, K

    2013-01-01

    The TDCpix is a novel pixel readout ASIC for the NA62 Gigatracker detector. NA62 is a new experiment being installed at the CERN Super Proton Synchrotron. Its Gigatracker detector shall provide on-beam tracking and time stamping of individual particles with a time resolution of 150 ps rms. It will consist of three tracking stations, each with one hybrid pixel sensor. The peak fl ow of particles crossing the detector modules reaches 1.27 MHz/mm 2 for a total rate of about 0.75 GHz. Ten TDCpix chips will be bump-bonded to every silicon pixel sensor. Each chip shall perform time stamping of 100 M particle hits per second with a detection ef fi ciency above 99% and a timing accuracy better than 200 ps rms for an overall three-station-setup time resolution of better than 150 ps. The TDCpix chip has been designed in a 130 nm CMOS technology. It will feature 45 40 square pixels of 300 300 μ m 2 and a complex End of Column peripheral region including an array of TDCs based on DLLs, four high speed serializers, a low...

  15. The CERN Antiproton Collider Programme Accelerators and Accumulation Rings

    CERN Document Server

    Koziol, Heribert

    2004-01-01

    One of CERN's most daring and successful undertakings was the quest for the intermediate bosons, W and Z. In this paper, we describe the accelerator part of the venture which relied on a number of innovations: an extension of the budding method of stochastic cooling by many orders of magnitude; the construction of the Antiproton Accumulator, depending on several novel accelerator methods and technologies; major modifications to the 26 GeV PS Complex; and the radical conversion of the 300 GeV SPS, which just had started up as an accelerator, to a protonâ€"antiproton collider. The SPS Collider had to master the beamâ€"beam effect far beyond limits reached ever before and had to function in a tight symbiosis with the huge detectors UA1 and UA2.

  16. People and things. CERN Courier, Jun 1979, v. 19(4)

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    On 1 April, six months ahead of schedule, electrons were injected into the 8 GeV electron-positron storage ring, CESR, at Cornell. Two weeks later beam was accumulated at an energy of 5.5 GeV. The contract for the management and construct/on of the conventional facilities of the ISABELLE 400 GeV proton storage rings to be built at the Brookhaven Laboratory has been awarded to the New York firm of Ammann and Whitney. Greatly helped by the quality of the beams from the new linac, the CERN 800 MeV four-ring Booster has achieved several new records which bode well for the role it has to play with the PS in feeding the high energy machines in the coming years

  17. People and things. CERN Courier, Jun 1979, v. 19(4)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1979-06-15

    On 1 April, six months ahead of schedule, electrons were injected into the 8 GeV electron-positron storage ring, CESR, at Cornell. Two weeks later beam was accumulated at an energy of 5.5 GeV. The contract for the management and construct/on of the conventional facilities of the ISABELLE 400 GeV proton storage rings to be built at the Brookhaven Laboratory has been awarded to the New York firm of Ammann and Whitney. Greatly helped by the quality of the beams from the new linac, the CERN 800 MeV four-ring Booster has achieved several new records which bode well for the role it has to play with the PS in feeding the high energy machines in the coming years.

  18. Determination of grafting conversion degree in PS/PS-graft-POSS/POSS hybrid nanocomposites obtained through reactive processing

    International Nuclear Information System (INIS)

    Bianchi, Otavio; Repenning, Gustavo B.; Mauler, Raquel S.; Oliveira, Ricardo V.B.; Canto, Leonardo B.

    2011-01-01

    Hybrid nanocomposites of polystyrene (PS) and polyhedral oligomeric silsesquioxanes (POSS) - PS/PS-graft-POSS/POSS - with different grafting degrees were prepared by reactive melt processing using dicumyl peroxide (DCP) as initiator in the presence or absence of styrene monomer as radical transfer agent. Gel permeation chromatography (GPC) using triple-detector and proton nuclear magnetic resonance (NMR 1 H) analyses were used together to determine the conversion degree of PS-graft-POSS as a function of the reactive processing conditions adopted. GPC was employed to evaluate the effects of grafting (PS-graft-POSS) and PS chains degradation (β scission) that occur simultaneously during processing on the variation of average molecular masses and distributions for each PS/POSS sample. PS/POSS systems processed with styrene showed higher weight average molecular weights (M w ) and lower polydispersity indexes (M w /M n ), as a result of higher grafting (PS-graft-POSS) conversion (28-40%) and lower PS chain degradation level, as compared to PS/POSS systems processed without styrene in which the degree of grafting conversion was around 25-28%. (author)

  19. Study of the beam-cavity interaction in the CERN PS 10 MHz cavities and investigation of hardware solutions to reduce beam loading

    CERN Document Server

    AUTHOR|(CDS)2086984; Palumbo, Luigi

    In the Proton Synchrotron (PS), where the LHC protons longitudinal structure (bunch spacing) is determined as the result of a sophisticated series of Radio Frequency (RF) gymnastics, collective effects were identified as a major limitation to the achievable beam current delivered to the LHC. Dedicated machine development studies pointed out the RF cavities to be one of the major source of instability in the PS. In particular, the 10 MHz RF system, responsible for beam acceleration, was identified as the most probable impedance source in the machine. The cavity impedance limits the circulating intensity in the accelerator since the beam-induced voltage could trigger longitudinal instabilities causing beam losses. For this reason the cavity impedance seen by the beam must be kept as low as possible. In the framework of the LHC Injector Upgrade (LIU) project, the present PS 10 MHz RF system requires an upgrade, in order to reach higher beam intensities and to reduce beam loading. This thesis focuses on the impro...

  20. The fast trigger scintillator for the JETSET experiment (PS202/LEAR)

    International Nuclear Information System (INIS)

    Sefzick, T.

    1988-12-01

    In the present thesis the trigger detector of the JETSET experiment (PS202) at the LEAR/CERN consisting of scintillation counters is presented. After giving a start signal in a second stage of the trigger electronics the determination of the position of the traversed points of the reaction products is performed with the information of the scintillation detector. A third following trigger stage shall study the position informations given by the second stage under kinematical points of view. The present diploma thesis deals especially with the first two trigger stages. As basic conditions the components of a scintillation counter are treated and calibration and testing possibilities presented. For this belongs a fast light pulser with green or blue LED. Results of the studies which scintillator and light-guide materials are most suitable for the JETSET experiment are presented. (orig./HSI) [de

  1. MapCERN: the CERN map on your mobile

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    On the initiative of the GS Department, a new smartphone application called MapCERN has just been released. Available in two different versions – one from the Apple Store for iPhones and the other from the web for Android and Blackberry – it will help you to find the building you're looking for more easily.     The Globe of Science and Innovation as "seen" in the augmented reality of the iPhone.  You've got an appointment with someone at the other end of the CERN site and you're planning to use the CERN map to find your way there but you suddenly realise you've left it in your office… No need to panic! Simply take out your smartphone and let it guide you to the building you're looking for. This first official CERN application, which has been developed by the GS Department in collaboration with private industry, is available free of charge from the Apple Store in the case of iPhones an...

  2. CERN honours its guides

    CERN Multimedia

    2004-01-01

    At the end of January, CERN's guides were rewarded for their devotion to the Laboratory. They have a passion for their work, know CERN inside-out and for 40 years have shown people of all ages and nationalities, from all walks of life, around the Laboratory. Who are they? Why, the CERN guides, of course. On 27 January, ten of CERN's 180 guides received special honours for their impressive number of guided tours in 2003. Presenting the awards in the Microcosm hall, CERN's Director-General Robert Aymar congratulated the winners on the key role they play with respect to the general public. "CERN would be nothing without you who show them its activities," he stressed. CERN's Director-General Robert Aymar congratulates Alberto Ribon for his tally of over 40 visits in the course of 2003.One of the prizes was the book «The Particle Odyssey». Here the book's co-author Christine Sutton dedicates it for Sijin Qian. Tzanko Spassoff (PH) and retired staff members Klaus Batzner and Antonio Francano wo...

  3. Inspired by CERN

    CERN Multimedia

    2004-01-01

    Art students inspired by CERN will be returning to show their work 9 to 16 October in Building 500, outside the Auditorium. Seventeen art students from around Europe visited CERN last January for a week of introductions to particle physics and astrophysics, and discussions with CERN scientists about their projects. A CERN scientist "adopted"each artist so they could ask questions during and after the visit. Now the seeds planted during their visit have come to fruition in a show using many media and exploring varied concepts, such as how people experience the online world, the sheer scale of CERN's equipment, and the abstractness of the entities scientists are looking for. "The work is so varied, people are going to love some pieces and detest others," says Andrew Charalambous, the project coordinator from University College London who is also curating the exhibition. "It's contemporary modern art, and that's sometimes difficult to take in." For more information on this thought-provoking show, see: htt...

  4. CERN Mobility Survey

    CERN Multimedia

    GS Department

    2011-01-01

    The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

  5. France at CERN

    CERN Multimedia

    2001-01-01

    From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

  6. Britain at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1994-01-01

    Thirty-two British hi-tech companies present their products at this new industrial exhibition at CERN which takes place from 22 to 25 November, 1994. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

  7. Arts@CERN | ACCELERATE Austria | 19 May | IdeaSquare

    CERN Multimedia

    2016-01-01

    ​Arts@CERN welcomes you to a talk by architects Sandra Manninger and Matias Del Campo, at IdeaSquare (Point 1) on May 19 at 6:00 p.m.   Sensible Bodies - architecture, data, and desire. Sandra and Matias are the winning architects for ACCELERATE Austria. Focusing on the notion of geometry, they are at CERN during the month of May, as artists in residence. Their research highlights how to go beyond beautiful data to discover something that could be defined voluptuous data. This coagulation of numbers, algorithms, procedures and programs uses the forces of thriving nature and, passing through the calculation of a multi-core processor, knits them with human desire. Read more. ACCELERATE Austria is supported by The Department of Arts of the Federal Chancellery of Austria. Thursday, May 19 at 6:00 p.m. at IdeaSquare.  See event on Indico. 

  8. Fusion Revisits CERN

    CERN Multimedia

    2001-01-01

    It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

  9. ps-ro Fuzzy Open(Closed Functions and ps-ro Fuzzy Semi-Homeomorphism

    Directory of Open Access Journals (Sweden)

    Pankaj Chettri

    2015-11-01

    Full Text Available The aim of this paper is to introduce and characterize some new class of functions in a fuzzy topological space termed as ps-ro fuzzy open(closed functions, ps-ro fuzzy pre semiopen functions and ps-ro fuzzy semi-homeomorphism. The interrelation among these concepts and also their relations with the parallel existing concepts are established. It is also shown with the help of examples that these newly introduced concepts are independent of the well known existing allied concepts.

  10. CERN Services Availability during the CERN Annual Closure 2011

    CERN Multimedia

    IT & GS Departments

    2011-01-01

    General Services: Most of the services provided by the GS Department that do not depend on continuous human presence will remain available during the CERN annual closure. Support levels are reduced during this period, in general the target reaction time for problems will be ½ day. Apart from the heating system, no interruptions are scheduled. In case of failure, the reaction time for restoration of services depends on the arrangements that have been made on a service by service level. Incidents will be documented at http://gssb.web.cern.ch/ For more detailed information please consult the service-portal (http://cern.ch/service-portal). Computing Services Most of the services provided by the IT Department - including WLCG production services - will remain available during the CERN annual closure. No interruptions are scheduled but in case of failure, the restoration of services cannot be guaranteed. Problems will be dealt with on a best effort basis only. However, please note: Experts shoul...

  11. Last PS magnet refurbished

    CERN Multimedia

    2009-01-01

    PS Magnet Refurbishment Programme Completed. The 51st and final refurbished magnet was transported to the PS on Tuesday 3 February. The repair and consolidation work on the PS started back in 2003 when two magnets and a busbar connection were found to be faulty during routine high-voltage tests. The cause of the fault was a combination of age and radiation on electrical insulation. After further investigation the decision was taken to overhaul half of the PS’s 100 magnets to reduce the risk of a similar fault. As from 20 February the PS ring will start a five-week test programme to be ready for operation at the end of March.

  12. New patent in sight for CERN-made technology

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    A portable gamma and beta radiation survey meter capable of operating in a strong magnetic field is the most recent subject of a CERN patent application. Developed by members of the HSE Unit, the new instrument may find applications not only in research laboratories but also in hospitals where radioactivity is managed in the presence of magnetic fields.   The new instrument consists of two parts: an active probe and a counting unit. Inside the probe, a scintillating crystal sends its signal to a photo detection module, which in turn is connected to the electronics. The counting unit is a portable box to be fixed on the operator’s waist. Tested in a magnetic field up to 1 Tesla, this innovative radiation survey meter has an operating range of a fraction of µSv/h to 1 mSv/h for the ambient dose equivalent rate, and 45 keV – 1.3 MeV for photon energy, with a fast response. “The instrument is the result of a collaboration between CERN and the Milan Politecnico ...

  13. ConCERNed for Humanity Club and Cine Club

    CERN Multimedia

    ConCERNed for Humanity Club and Cine Club

    2012-01-01

      Thursday 10th May 2012 at 20:00 CERN Council Chamber Capitalism: A Love Story By Michael Moore (USA, 2009) 123 min, original version English; French subtitles. Capitalism: A Love Story examines the impact of corporate dominance on the everyday lives of Americans. The film moves from Middle America, to the halls of power in Washington, to the global financial epicenter in Manhattan. With both humour and outrage, it explores the question: What is the price that America pays for its love of capitalism? Families pay the price with their jobs, their homes and their savings. Moore goes into the homes of ordinary people whose lives have been turned upside down; and he goes looking for explanations in Washington, DC and elsewhere. What he finds are the all-too-familiar symptoms of a love affair gone astray: lies, abuse, betrayal...and 14,000 jobs being lost every day. Capitalism: A Love Story also presents what a more hopeful future could look like. Organisation : ConCERNed for Humanity Club an...

  14. The Duke of York visits CERN

    CERN Multimedia

    2004-01-01

    The Duke of York chats before inaugurating the UK@CERN exhibition. From left to right: Robert Aymar, CERN's Director General, the Duke of York, and leading UK scientists at CERN: Jim Virdee, CMS deputy spokeman; theorist John Ellis ; and Steve Myers, head of the AB Department. On 23 November, the Duke of York visited CERN and, in his capacity as the UK's Special Representative for International Trade and Investment, inaugurated the UK@CERN Exhibition. This biennial trade show was initially held in 1968, the first such exhibition by a CERN member state. This year 22 companies displayed goods and services that could be of interest to CERN scientists. In his inaugural speech, the Duke emphasized that business between companies and CERN "is a two-way information flow with mutual benefits." The companies make sales but also benefit from technologies that CERN transfers to them. CERN benefits from the exchange, the Duke said, addressing CERN's scientists, because it "frees your time for what you do best: science....

  15. See how people wished CERN a happy birthday with #MyCERN60

    CERN Multimedia

    Kate Kahle

    2014-01-01

    In the run up to 29 September, the hashtag #MyCERN60 gave CERN people and CERN’s followers on social media the chance to wish CERN a happy 60th birthday. Here are some of the highlights.   When tasked with wishing the European Laboratory for Particle Physics a happy 60th birthday, what would you do? Would you draw a picture? Bake a cake? #MyCERN60 on Twitter (EN, FR), Facebook, Google+ and social.cern.ch, gave people the opportunity to send a personal birthday greeting to the Organization. The results were heart-warming. Below is a selection of some of the messages received: Image credits: top left Sanam Ganjian via Google+, top right Rose Hannert via Twitter, middle left Anna P and Tina Nantsou via Facebook, middle right Francesco Palmonari via Twitter, bottom left  Smita Darmora via Facebook, bottom middle Hannah McClow via Twitter, bottom right Katya Chong via Twitter. Croatian students from the "Fran Galović" Koprivnica school celebrating CERN...

  16. A hybrid DE–PS algorithm for load frequency control under deregulated power system with UPFC and RFB

    Directory of Open Access Journals (Sweden)

    Rabindra Kumar Sahu

    2015-09-01

    Full Text Available In this paper, a Modified Integral Derivative (MID controller is proposed for Load Frequency Control (LFC of multi-area multi-source power system in deregulated environment. The multi-source power system is having different sources of power generation such as thermal, hydro, wind and diesel generating units considering boiler dynamics for thermal plants, Generation Rate Constraint (GRC and Governor Dead Band (GDB non-linearity. The superiority of proposed hybrid Differential Evolution and Pattern Search (hDE-PS optimized MID controller over GA and DE techniques is demonstrated. Further, the effectiveness of proposed hDE-PS optimized MID controller over Integral (I and Integral Derivative (ID controller is verified. Then, to further improve the system performance, Unified Power Flow Controller (UPFC is placed in the tie-line and Redox Flow Batteries (RFBs are considered in the first area. The performance of proposed approach is evaluated at all possible power transactions that take place in a deregulated power market.

  17. CREATIVE COLLISIONS: ARTS @CERN

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    In 2000, CERN hosted Signatures of the Invisible – one of the landmark initiatives in arts and science. In 2012, CERN is now initiating its own science/arts programme Collide@CERN in different arts disciplines. The first of these is in digital arts, and the international competition to find the winning artist is called the Prix Ars Electronica Collide@CERN. It was announced September 2011 at CERN’s first collaboration with an international arts festival – Ars Electronica in Linz. The competition attracted over 395 entries from 40 countries around the world. The winning artist, Julius Von Bismarck, will begin his two month residency here at CERN next month. Ariane Koek who leads on this initiative, discusses the residency programme, as well as the background about Art@CERN. History has shown that particle physics and the arts are great inspiration partners. The publication of the paper by Max Planck which gave birth to quantum mechanics as well as those by Einstein, heavily influenced some of the grea...

  18. CERN and the environment

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    New webpages answer common questions about CERN and the environment.   One of the new public webpages dedicated to CERN and the environment. Do your neighbours ever ask you about CERN’s environmental impact? And about radiation in particular? If so, the answers to those questions can now be found online on a new set of public webpages dedicated to CERN and the environment. These pages, put together by the Occupational Health, Safety and Environmental Protection (HSE) unit and the groups responsible for CERN's site maintenance, contain a wealth of information on topics linked to the environment, such as biodiversity at CERN, waste management, ionising radiation, and water and electricity consumption. “CERN forms part of the local landscape, with its numerous sites and scientific activities. It’s understandable that people living nearby have questions about the impact of these activities and it’s important that we respond with complete transp...

  19. German visits to CERN

    CERN Multimedia

    2007-01-01

    State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

  20. CERN Relay Race

    CERN Document Server

    CERN Running Club

    2010-01-01

    The CERN relay race will take place around the Meyrin site on Thursday 20 May, starting at 12.15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on the route, and how to register your team for the relay race, can be found at: https://espace.cern.ch/Running-Club/CERN-Relay

  1. The voice of Austrians at CERN

    CERN Multimedia

    2009-01-01

    On 7 May the Austrian Minister for Science announced that, after over 50 years of membership, Austria would withdraw from CERN. By 18 May the Austrian Chancellor had reversed the decision. The Bulletin spoke to some of the Austrian community at CERN about the rollercoaster of events in between. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 533, 300, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-posterframe-640x360-at-10-percent.jpg', '1180837', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); To watch this video in German click here. There was jubil...

  2. Effects of External Digital Elevation Model Inaccuracy on StaMPS-PS Processing: A Case Study in Shenzhen, China

    Directory of Open Access Journals (Sweden)

    Yanan Du

    2017-11-01

    Full Text Available External Digital Elevation Models (DEMs with different resolutions and accuracies cause different topographic residuals in differential interferograms of Multi-temporal InSAR (MTInSAR, especially for the phase-based StaMPS-PS. The PS selection and deformation parameter estimation of StaMPS-PS are closely related to the spatially uncorrected error, which is directly affected by external DEMs. However, it is still far from clear how the high resolution and accurate external DEM affects the results of the StaMPS-PS (e.g., PS selection and deformation parameter calculation on different platforms (X band TerraSAR, C band ENVISAT ASAR and L band ALOS/PALSAR1. In this study, abundant synthetic tests are performed to assess the influences of external DEMs on parameter estimations, such as the mean deformation rate and the deformation time-series. Real SAR images, covering Shenzhen city in China, are also selected to analyze the PS selection and distribution as well as to validate the results of synthetic tests. The results show that the PS points selected by the 5 m TanDEM-X DEM are 10.32%, 4.25% and 0.34% more than those selected by the 30 m SRTM DEM at X, C and L bands SAR platforms, respectively, when a multi-look geocoding operation is adopted for X band in the SRTM DEM case. We also find that the influences of external DEMs on the mean deformation rate are not significant and are inversely proportional to the wavelength of the satellite platforms. The standard deviations of the mean deformation rate difference for the X, C and L bands are 0.54, 0.30 and 0.10 mm/year, respectively. Similarly, the influences of external DEMs on the deformation time-series estimation for the three platforms are also slight, except for local artifacts whose root-mean-square error (RMSE ≥ 6 mm. Based on these analyses, some implications and suggestions for external DEMs on StaMPS-PS processing are discussed and provided.

  3. CERN Phonebook evolution

    CERN Multimedia

    Sébastien Dellabella

    2012-01-01

    Consolidating phonebooks at CERN We have had many phonebooks in the past, Xwho (now decommissioned), the NICE phonebook on Windows PCs, and more recently the web site people.cern.ch. However, diversity doesn’t always equate to improved efficiency or quality. So in order to reduce the maintenance effort and to improve the user experience, we have consolidated these various phonebooks into a single web application: phonebook.cern.ch Motivations for change The NICE Phonebook was introduced in the year 2000 when Windows 95 was the major desktop platform. Since then, a lot has changed not only in technology and the desktop landscape but also in the variety of devices used to access the data (notably smartphones and tablets). Updating the NICE phonebook is slow. Once the master database is modified it can take up to two days for the data to propagate to the application. Thus, we are now planning the retirement of the NICE phonebook application. The new Phonebook.cern.ch The new phonebook.cern.ch...

  4. Apprenticeship at CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

  5. CERN television news

    CERN Multimedia

    2002-01-01

    CERN events brought right to your desktop by the new video bulletin.   CERN now has its very own news broadcast , or rather 'webcast', with a host of special reports and even a star presenter. From today onwards, just go to the Bulletin's web page, click on the 'video news' link and sit back and enjoy the latest news about CERN, presented in images by Wendy Korda. The ten-minute newscast in both French and English, the Organization's two official languages, presents interviews, pictures of experiments and computer-generated graphics, bringing you right up to date with some of the Laboratory's latest stories. The show concludes with a selection of the best snapshots taken by the CERN Photo Lab. So every one or two months CERN's Audio-Video Service (ETT/DH) will be putting together a video news report that you can watch on your own desktop computer. Daniel Boileau, Patrick Gilbert de Vautibault and Jacques Fichet, the Service's three technicians, came up with the idea of producing this regular feat...

  6. CERN Relay Race

    CERN Multimedia

    2009-01-01

    The CERN relay race, now in its 39th year, is already a well-known tradition, but this year the organizers say the event will have even more of a festival feeling. Just off the starting line of the CERN relay race.For the past few years, spectators and runners at the CERN relay race have been able to enjoy a beer while listening to music from the CERN music and jazz clubs. But this year the organizers are aiming for "even more of a festival atmosphere". As David Nisbet, President of the CERN running club and organizer of the relay race, says: "Work is not just about getting your head down and doing the theory, it’s also about enjoying the company of your colleagues." This year, on top of music from the Santa Luis Band and the Canettes Blues Band, there will be demonstrations from the Aikido and softball clubs, a stretching session by the Fitness club, as well as various stalls and of course, the well-earned beer from AGLUP, the B...

  7. Radiography at CERN

    CERN Multimedia

    HSE Unit

    2014-01-01

    What is industrial radiography? It is a non-destructive method with a wide variety of applications, such as inspecting the quality of a weld. It uses high-energy radioactive sources or an X-ray generator.   Is this inspection technique used at CERN? Yes, it is widely used at CERN by the EN-MME Group, which outsources the work to one or more companies, depending on the workload. Is it possible to carry out radiography anywhere at CERN? Yes, it is possible to carry out radiography in any building/accelerator/experiment area at CERN (including in areas which are not normally subject to radiological hazards). When is radiography carried out? It normally takes place outside of working hours (7 p.m. to 6 a.m.). How will I know if radiography is taking place in my building? If this activity is planned in a CERN building, notices will be affixed to all of its main entrance doors at least 24 hours in advance. What are the risks? There is a risk of exposure to very high levels of radiation, dep...

  8. CERN CAR STICKERS

    CERN Multimedia

    Service Accueil et Controle d'Accès; ST Division

    1999-01-01

    In accordance with Operational Circular n¡ 2, paragraph 21, CERN car stickers are to be renewed. The new stickers are now available and will be valid for a year.Youare therefore requested:either to obtain them from the distribution points for new stickers (see below); or to send us the application form below, duly completed, via the internal mail; or to complete the application form directly via the Web at the address: http://cern.ch/registration-stickers. Each vehicle has to carry a sticker and needs a separate application form.Vehicles bearing CERN diplomatic plates (CD07, 431K and CD series) do not need a sticker for access to the CERN areas.Thank you.List of distribution points:Registration Service (bldg 55 1st floor), open from 07h30 to 16h30. Building 33 (entrance hall), open from 08h00 to 18h00. Building 120 (ground floor), outside working hours.Name Surname CERN identification number Vehicle registration plates Country issuing the plates Vehicle ma...

  9. Parallelism at Cern: real-time and off-line applications in the GP-MIMD2 project

    International Nuclear Information System (INIS)

    Calafiura, P.

    1997-01-01

    A wide range of general purpose high-energy physics applications, ranging from Monte Carlo simulation to data acquisition, from interactive data analysis to on-line filtering, have been ported, or developed, and run in parallel on IBM SP-2 and Meiko CS-2 CERN large multi-processor machines. The ESPRIT project GP-MIMD2 has been a catalyst for the interest in parallel computing at CERN. The project provided the 128 processor Meiko CS-2 system that is now succesfully integrated in the CERN computing environment. The CERN experiment NA48 was involved in the GP-MIMD2 project since the beginning. NA48 physicists run, as part of their day-to-day work, simulation and analysis programs parallelized using the message passing interface MPI. The CS-2 is also a vital component of the experiment data acquisition system and will be used to calibrate in real-time the 13000 channels liquid krypton calorimeter. (orig.)

  10. psRNATarget: a plant small RNA target analysis server (2017 release).

    Science.gov (United States)

    Dai, Xinbin; Zhuang, Zhaohong; Zhao, Patrick Xuechun

    2018-04-30

    Plant regulatory small RNAs (sRNAs), which include most microRNAs (miRNAs) and a subset of small interfering RNAs (siRNAs), such as the phased siRNAs (phasiRNAs), play important roles in regulating gene expression. Although generated from genetically distinct biogenesis pathways, these regulatory sRNAs share the same mechanisms for post-translational gene silencing and translational inhibition. psRNATarget was developed to identify plant sRNA targets by (i) analyzing complementary matching between the sRNA sequence and target mRNA sequence using a predefined scoring schema and (ii) by evaluating target site accessibility. This update enhances its analytical performance by developing a new scoring schema that is capable of discovering miRNA-mRNA interactions at higher 'recall rates' without significantly increasing total prediction output. The scoring procedure is customizable for the users to search both canonical and non-canonical targets. This update also enables transmitting and analyzing 'big' data empowered by (a) the implementation of multi-threading chunked file uploading, which can be paused and resumed, using HTML5 APIs and (b) the allocation of significantly more computing nodes to its back-end Linux cluster. The updated psRNATarget server has clear, compelling and user-friendly interfaces that enhance user experiences and present data clearly and concisely. The psRNATarget is freely available at http://plantgrn.noble.org/psRNATarget/.

  11. CERN Library | Book presentation: "60 years of CERN experiments and discoveries" | 15 December

    CERN Document Server

    CERN Library

    2015-01-01

    "60 years of CERN experiments and discoveries", edited by Herwig Schopper and Luigi Di Lella.   Tuesday 15 December at 16:00 Room C (Building 61) The presentation will be followed by refreshments The book contains a description of the most important experimental results achieved at CERN during the past 60 years, from the mid-1950s to the latest discovery of the Higgs particle. It covers the results from early accelerators at CERN to the most recent results at the LHC and thus provides an excellent review of the achievements of this outstanding laboratory. It reflects not only the impressive scientific progress achieved during the past six decades but demonstrates also the special way of successful international collaboration developed at CERN. The e-book is available in Open Access here thanks to an agreement between CERN and the publisher. "60 years of CERN experiments and discoveries", ed. by Herwig Schopper and Luigi Di Lella, World Scientific, 2015, ISBN 9789...

  12. Courrier CERN

    CERN Multimedia

    2015-01-01

    Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

  13. NEWS: A trip to CERN

    Science.gov (United States)

    Ellison, A. D.

    2000-07-01

    Two years ago John Kinchin and myself were lucky enough to attend the Goldsmith's particle physics course. As well as many interesting lectures and activities, this course included a visit to CERN. To most physics teachers CERN is Mecca, a hallowed place where gods manipulate and manufacture matter. The experience of being there was even better. Alison Wright was an enthusiastic and very knowledgeable host who ensured the visit went smoothly and we all learned a lot. While we were there, John and I discussed the possibility of bringing a party of A-level students to see real physics in action. In February of this year we managed it. 33 students from two schools, Boston Grammar School and Northampton School for Boys, and four staff left England and caught the 2 am ferry to France. Many hours and a few `short cuts' later we arrived at our hotel in St Genis, not far from CERN. The first day was spent sight-seeing in Lausanne and Geneva. The Olympic museum in Lausanne is well worth a visit. Unfortunately, the famous fountain in Geneva was turned off, but then you can't have everything. The following morning we turned up at CERN late due to the coach's brakes being iced up! We were met once again by Alison Wright who forgave us and introduced the visit by giving an excellent talk on CERN, its background and its reason for existing. At this point we met another member of our Goldsmith's course and his students so we joined forces once again. We then piled back into the coach to re-cross the border and visit ALEPH. ALEPH is a monster of a detector 150 m below ground. We divided into four groups, each with a very able and knowledgeable guide, and toured the site. The size and scale of the detector are awesome and the students were suitably impressed. We repeated the speed of sound experiment of two years ago at the bottom of a 150 m concrete shaft (320 m s-1), posed for a group photo in front of the detector (figure 1) and returned to the main site for lunch in

  14. News regarding Mobility at CERN

    CERN Multimedia

    2016-01-01

    CERN Bikes CERN owns a fleet of more than 500 bikes, managed by the Mobility Centre (bdg. 6167). Members of CERN personnel (MPE and MPA) can use these free of charge during work-related activities at CERN (a security deposit is requested). Between 1st of June to 30th September anyone, except Summer Students, who wish to benefit from this service shall pay 1 CHF per day. As from the 1st of August, the CERN bike rental requests are done via the Service Now (SNOW) Portal. For more information, please consult: http://cern.ch/bike-rental.   CERN Cars More than 60 vehicles are available for rent by members of personnel (MPE and MPA) at the Mobility Center (bdg. 6167). As from the 5th of September you can submit reservation requests via the new EDH Car Rental Request document. As a reminder, the Terms of Use are the following: Operational Circular n° 4 (rev.1), governing the use of CERN vehicles;   Any use of the service must be authorised by the concerned Head of Department or Team Leader...

  15. CERN internal communication is evolving

    CERN Multimedia

    2016-01-01

    CERN news will now be regularly updated on the CERN People page (see here).      Dear readers, All over the world, communication is becoming increasingly instantaneous, with news published in real time on websites and social networks. In order to keep pace with these changes, CERN's internal communication is evolving too. From now on, you will be informed of what’s happening at CERN more often via the “CERN people” page, which will frequently be updated with news. The Bulletin is following this trend too: twice a month, we will compile the most important articles published on the CERN site, with a brand-new layout. You will receive an e-mail every two weeks as soon as this new form of the Bulletin is available. If you have interesting news or stories to share, tell us about them through the form at: https://communications.web.cern.ch/got-story-cern-website​. You can also find out about news from CERN in real time...

  16. The electron accelerator for the AWAKE experiment at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Pepitone, K., E-mail: kevin.pepitone@cern.ch [CERN, Geneva (Switzerland); Doebert, S., E-mail: steffen.doebert@cern.ch [CERN, Geneva (Switzerland); Burt, G. [The University of Lancaster, Lancaster (United Kingdom); Chevallay, E.; Chritin, N.; Delory, C.; Fedosseev, V.; Hessler, Ch.; McMonagle, G. [CERN, Geneva (Switzerland); Mete, O. [The University of Manchester, Manchester (United Kingdom); Verzilov, V. [Triumf, Vancouver (Canada); Apsimon, R. [The University of Lancaster, Lancaster (United Kingdom)

    2016-09-01

    The AWAKE collaboration prepares a proton driven plasma wakefield acceleration experiment using the SPS beam at CERN. A long proton bunch extracted from the SPS interacts with a high power laser and a 10 m long rubidium vapour plasma cell to create strong wakefields allowing sustained electron acceleration. The electron bunch to probe these wakefields is supplied by a 20 MeV electron accelerator. The electron accelerator consists of an RF-gun and a short booster structure. This electron source should provide beams with intensities between 0.1 and 1 nC, bunch lengths between 0.3 and 3 ps and an emittance of the order of 2 mm mrad. The wide range of parameters should cope with the uncertainties and future prospects of the planned experiments. The layout of the electron accelerator, its instrumentation and beam dynamics simulations are presented.

  17. An Integration Testing Facility for the CERN Accelerator Controls System

    CERN Document Server

    Stapley, N; Bau, J C; Deghaye, S; Dehavay, C; Sliwinski, W; Sobczak, M

    2009-01-01

    A major effort has been invested in the design, development, and deployment of the LHC Control System. This large control system is made up of a set of core components and dependencies, which although tested individually, are often not able to be tested together on a system capable of representing the complete control system environment, including hardware. Furthermore this control system is being adapted and applied to CERN's whole accelerator complex, and in particular for the forthcoming renovation of the PS accelerators. To ensure quality is maintained as the system evolves, and toimprove defect prevention, the Controls Group launched a project to provide a dedicated facility for continuous, automated, integration testing of its core components to incorporate into its production process. We describe the project, initial lessons from its application, status, and future directions.

  18. Experiences constructing and running large shared clusters at CERN

    International Nuclear Information System (INIS)

    Bahyl, V.; Barroso, M.; Charbonnier, C.; Eldik, J. van; Jones, P.; Kleinwort, T.; Smith, T.

    2001-01-01

    The latest steps in the steady evolution of the CERN Computer Centre have been to reduce the multitude of clusters and architectures and to concentrate on commodity hardware. An active RISC decommissioning program has been undertaken to encourage migration to Linux, and a program of merging dedicated experiment clusters into larger shared facilities has been launched. The authors describe these programs and the experiences running the resultant multi-hundred node shared Linux clusters

  19. CERN & Society launches donation portal

    CERN Multimedia

    Cian O'Luanaigh

    2014-01-01

    The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

  20. CERN in the park

    CERN Multimedia

    2002-01-01

    CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

  1. Transmutation in ADS and needs for nuclear data, with an introduction to the n-TOF at CERN

    CERN Document Server

    González, E; Fernández, R; García, J; Villamarín, D

    1999-01-01

    Transmutation can help in the nuclear waste problem by reducing seriously the life and amount of the most dangerous isotopes (radiotoxicity, heat, packing volume and neutron multiplication reductions). ADS are one of the best technologies for nuclear waste transmutation at large scale. Although enough information is available to prepare conceptual designs and make assessments on their performance, a large R&D campaign is required to obtain the precision data required to optimize the detailed engineering design and refine our expectations calculations on waste reduction by the different transmutation strategies being proposed. In particular a large R&D effort is required in nuclear physics, where fundamental differential measurements and integral verification experiments are required. In this sense, the PS213 n-TOF at CERN PS (at Switzerland) will become one of the largest installations to perform the fundamental differential measurements and a wide international collaboration has been setup to perform...

  2. CERN Relay Race 2018

    CERN Document Server

    CERN Running club

    2018-01-01

    The CERN running club, in collaboration with the Staff Association, is happy to announce the 2018 relay race edition. It will take place on Thursday, May 24th and will consist as every year in a round trip of the CERN Meyrin site in teams of 6 members. It is a fun event, and you do not have to run fast to enjoy it. Registrations will be open from May 1st to May 22nd on the running club web site. All information concerning the race and the registration are available there too: http://runningclub.web.cern.ch/content/cern-relay-race. A video of the previous edition is also available here : http://cern.ch/go/Nk7C. As every year, there will be animations starting at noon on the lawn in front of restaurant 1, and information stands for many CERN associations and clubs will be available. The running club partners will also be participate in the event, namely Berthie Sport, Interfon and Uniqa.

  3. CERN openlab Open Day

    CERN Multimedia

    Andrew Purcell

    2015-01-01

    CERN openlab is the unique public-private partnership between CERN and leading companies in the field of information and communication technology. The programme is now entering an exciting new phase and is expanding to include other public research organisations for the first time. A special event will be held at CERN to mark this occasion.   CERN openlab was created in 2001 and is now entering its fifth three-year phase (2015-2017). Its mission is to accelerate the development of cutting-edge solutions to be used by the scientific community to control the operations of complex machines and to analyse the vast amounts of data produced by physics experiments. During Run 2 of the LHC, it is expected that the CERN Data Centre will store more than 30 petabytes of data per year from the LHC experiments, which is equivalent to about 1.2 million Blu-ray discs, or 250 years of HD video. Testing in this demanding environment provides the companies collaborating in CERN openlab with valuable feedback o...

  4. CERN Yoga club

    CERN Multimedia

    Le comité du club de yoga du CERN

    2017-01-01

    Members of the CERN Yoga club are invited to the General Assembly of the club which will take place on: Wednesday 5 July at 14.00 in conference room 504-E-005 (Next to Yoga room) The agenda is available on the club's website: cern.ch/club-yoga/ If you are unable to participate, please elect a proxy voter to vote on your behalf (available from your teacher or in the Yoga room) – these can be addressed to: cernyoga@cern.ch

  5. Britain at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1998-01-01

    It was thirty years ago that British industry held the first ever trade fair at CERN and industrial links between Britain and the Laboratory have never looked back. Speaking at the opening of the 1998 "Britain at CERN" exhibition on 20 October, H.E. Mr Christopher Hulse, British Ambassador to Switzerland, underlined the value of CERN contracts to British industry saying that "The prize is well worth going for, I understand that contracts worth  1.5bn will be awarded over the next six years".

  6. Get all the official CERN holidays automatically added to your CERN mailbox calendar

    CERN Multimedia

    CERN Mail Services

    2013-01-01

    A new tool has been created that makes it easy to check the official CERN holidays. These holidays will appear automatically in your calendar. Currently, to check the official CERN holidays, you had to consult either the CERN website or EDH. Now you can see these holidays in your CERN calendar together with absences, meetings and other events. To take advantage of this feature: add yourself as member of the e-group “holidays-to-calendar” here. You can also use this link. Your calendar will be updated the very next day.

  7. The TDCpix readout ASIC: A 75 ps resolution timing front-end for the NA62 Gigatracker hybrid pixel detector

    Energy Technology Data Exchange (ETDEWEB)

    Kluge, A., E-mail: alexander.kluge@cern.ch; Aglieri Rinella, G.; Bonacini, S.; Jarron, P.; Kaplon, J.; Morel, M.; Noy, M.; Perktold, L.; Poltorak, K.

    2013-12-21

    The TDCpix is a novel pixel readout ASIC for the NA62 Gigatracker detector. NA62 is a new experiment being installed at the CERN Super Proton Synchrotron. Its Gigatracker detector shall provide on-beam tracking and time stamping of individual particles with a time resolution of 150 ps rms. It will consist of three tracking stations, each with one hybrid pixel sensor. The peak flow of particles crossing the detector modules reaches 1.27 MHz/mm{sup 2} for a total rate of about 0.75 GHz. Ten TDCpix chips will be bump-bonded to every silicon pixel sensor. Each chip shall perform time stamping of 100 M particle hits per second with a detection efficiency above 99% and a timing accuracy better than 200 ps rms for an overall three-station-setup time resolution of better than 150 ps. The TDCpix chip has been designed in a 130 nm CMOS technology. It will feature 45×40 square pixels of 300×300μm{sup 2} and a complex End of Column peripheral region including an array of TDCs based on DLLs, four high speed serializers, a low-jitter PLL, readout and control circuits. This contribution will describe the complete design of the final TDCpix ASIC. It will discuss design choices, the challenges faced and some of the lessons learned. Furthermore, experimental results from the testing of circuit prototypes will be presented. These demonstrate the achievement of key performance figures such as a time resolution of the processing chain of 75 ps rms with a laser sent to the center of the pixel and the capability of time stamping charged particles with an overall resolution below 200 ps rms. -- Highlights: • Feasibility demonstration of a silicon pixel detector with sub-ns time tagging capability. • Demonstrator detector assembly with a time resolution of 75 ps RMS with laser charge injection; 170 ps RMS with particle beam. • Design of trigger-less TDCpix ASIC with 1800 pixels, 720 TDC channels and 4 3.2 Gbit/s serializers.

  8. "Infinitely CERN Memories from 50 years of research" CERN and Editions Suzanne Hurter are publishing a beautiful book, "Infinitely CERN", to commemorate the human and scientific adventure of CERN.

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    The book tells the history of CERN through the voices of those who lived it. Highlights such as scientific events, technical achievements and CERN's role as an international organization in Geneva, are recalled chronologically by people who witnessed them: administrators, engineers and physicists, including Georges Charpak, Carlo Rubbia and Simon van der Meer, who received the Nobel Prize in physics for discoveries made at CERN.

  9. Irradiation Facilities at CERN

    CERN Document Server

    Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

    2017-01-01

    CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

  10. 2005 CERN Relay Race

    CERN Multimedia

    Patrice Loiez

    2005-01-01

    The CERN Relay Race takes place each year in May and sees participants from all areas of the CERN staff. The winners in 2005 were The Shabbys with Los Latinos Volantes in second and Charmilles Technologies a close third. To add a touch of colour and levity, the CERN Jazz Club provided music at the finishing line.

  11. Brazil and CERN get closer

    CERN Multimedia

    2002-01-01

    The map of countries affiliated to CERN may in future include Brazil. On a visit to CERN last week, the Brazilian Minister of State for Science and Technology, Ronaldo Mota Sardenberg, expressed his country's interest in closer links to the Laboratory.   Luciano Maiani and the Brazilian Minister of State for Science and Technology Ronaldo Mota Sardenberg shake hands on CERN-Brazil co-operation. During his visit, the Minister and CERN Director General Luciano Maiani issued a joint statement for the continuation of a Co-operation Agreement first established in 1990. They also agreed to study the possibility of Brazil joining CERN-led Grid computing infrastructure projects. Brazilian physicists are already involved in the LHCb, ATLAS and CMS experiments. At the conclusion of the Minister's visit, he and Director-General Maiani agreed to establish a Working Group to examine ways of strengthening Brazil's links with CERN, and to prepare the way for a Brazilian request to CERN Council to become an Observer at th...

  12. President of Chile at CERN

    CERN Multimedia

    2007-01-01

    The President of Chile, Michelle Bachelet, in the ATLAS cavern with, from left to right, Peter Jenni, ATLAS Spokesman, Vivian Heyl, CONICYT President, and Robert Aymar, CERN Director-General. Robert Aymar, CERN Director-General, and Vivian Heyl, CONICYT President, signing a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científica y Tecnológica (CONICYT).The President of Chile, Michelle Bachelet, paid a visit to CERN during her three-day tour of Switzerland. The charismatic Michelle Bachelet and her large delegation were greeted by the CERN Director-General and then taken to see the ATLAS experiment and the LHC. She also took time to meet the Chilean community working at CERN, comprising several physicists in the Theory Group and the ATLAS experiment. The meeting was followed by the signing of a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científi...

  13. Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

  14. RSS based CERN Alerter. Information broadcast to all CERN offices.

    CERN Multimedia

    Otto, R

    2007-01-01

    Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send "targeted" messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS€™s SPM_quotMESSAGE command, Zephyr and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simpl...

  15. CERN at the Post Office

    CERN Multimedia

    2006-01-01

    In collaboration with CERN and the Conseil général de l'Ain, the French postal services of the Pays de Gex have released a new set of pre-paid envelopes paying tribute to CERN. The envelopes, which come in packets of ten, each featuring a different aspect of CERN, will be on sale from 6 June onwards. They will be available from five post offices in the Pays de Gex (Ferney-Voltaire, Prévessin-Moëns, Saint-Genis-Pouilly, Thoiry and CERN-Prévessin), as well as from the CERN Shop (Reception, Building 33). The envelopes were unveiled at an official ceremony on 23 May, which was attended by Jocelyne Boch, Vice-President of the Conseil général de l'Ain and Mayoress of Thoiry, as well as Marina Combe, Head of the Saint-Genis-Pouilly, Thoiry and CERN-Prévessin post offices, and Maximilian Metzger, CERN's Secretary-General. The last set of envelopes to feature CERN, which commemorated the Laboratory's 50th anniversary in 2004, were a huge success, with sales totalling 35 000 in less than a year. 'We received...

  16. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  17. CERN openlab Open Day | 10 June

    CERN Multimedia

    2015-01-01

    CERN openlab is now entering an exciting new phase and is expanding to include other public research organisations for the first time. To mark this occasion, a first-of-its-kind ‘CERN openlab Open Day’ event will be held at CERN on 10 June 2015.   CERN openlab is a unique public-private partnership between CERN and leading ICT companies. Its mission is to accelerate the development of cutting-edge solutions to be used by CERN’s scientific community. The ‘CERN openlab Open Day’ event will take place in the Main Auditorium on 10 June and will be an opportunity to learn more about the work carried out through CERN openlab to help tackle the challenges faced by the scientific community. Find out more: http://indico.cern.ch/event/381083/

  18. R3D3 in the Wild: Using A Robot for Turn Management in Multi-Party Interaction with a Virtual Human

    NARCIS (Netherlands)

    Theune, Mariet; Wiltenburg, Daan; Bode, Max; Linssen, Jeroen

    R3D3 is a combination of a virtual human with a non-speaking robot capable of head gestures and emotive gaze behaviour. We use the robot to implement various turn management functions for use in multi-party interaction with R3D3, and present the results of a field study investigating their effects

  19. Parking regulations on the CERN sites

    CERN Multimedia

    General Infrastructure Services Department

    2010-01-01

    The site surveillance service is also responsible for supervising compliance with the parking regulations on the CERN site. In that context, it ensures that the following rules are complied with on the CERN car park: Vehicles may not be left on a CERN car park for longer than 5 consecutive working days. However, CERN users are entitled to leave their vehicles parked at CERN for a longer period in the car park near Building 588 , subject to completing the application form "Demande d'autorisation pour un stationnement de longue durée" (application for a long-term parking permit) and sending it to the Reception and Access Control Service (access.surveillance@cern.ch) prior to departure.   Parking spaces, which are in short supply in many crowded areas of the CERN site, must not be occupied by abandoned vehicles/wrecks. The service organizes the disposal of such vehicles. Any CERN users wishing to get rid of a private vehicle parked on one of the CERN car pa...

  20. "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

    CERN Multimedia

    FI Department

    2008-01-01

    On January 29-30, 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition provides the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States – will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

  1. "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

    CERN Multimedia

    FI Department

    2008-01-01

    29-30 January 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition will provide the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States - will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

  2. Electromagnetic simulations for non-ultrarelativistic beams and applications to the CERN low energy machines

    CERN Document Server

    Zannini, C; Rumolo, G; Rijoff, T

    2014-01-01

    In the framework of the PS-Booster upgrade project an accurate impedance model is needed in order to determine the effect on the beam stability and assess the impact of the new devices to be installed in the machine. CST 3-D EM simulations are widely used to estimate the impedance contribution of the different devices along the CERN accelerator complex. Unlike the highly relativistic case, in which the reliability of the EM solver has been proved in many specific cases by comparing simulations with analytical results, the nonrelativistic case has been so far not yet benchmarked. In order to use systematically CST 3-D EM simulations for the PS-Booster, or even lower energy machines like the antiproton decelerator ELENA, a validation campaign has been carried out. The main complication to single out the beam coupling impedance, as resulting from the interaction of the beam with the surroundings, consisted of removing reliably the strong contribution of the direct space charge of the source bunch, which is inclu...

  3. A rendez-vous with history

    CERN Multimedia

    Corinne Pralavorio

    2010-01-01

    François de Rose, one of the founding fathers of CERN, visited the Laboratory. On this occasion, CERN organised a ceremony for his 100th birthday.   François de Rose, guided through the CERN control centre by Pierre Strubin from the Technology department. It was a moving, almost surreal, scene. On Wednesday 24 November, François de Rose, one of the founding fathers of CERN, visited the CERN Control Centre. In the early 1950s, François de Rose, a French diplomat, helped establish CERN along with some of the greatest physicists of the time. Standing in a futuristic room that only science fiction writers could have imagined when CERN began, the diplomat – who turned 100 only a few days before his visit - marvelled at the progress that had been made in nearly 60 years. Taking in the rush of operators – including those from PS, an accelerator which he inaugurated as President of the Council in 1960 – François de Rose...

  4. In the CERN Library

    CERN Multimedia

    CERN PhotoLab

    1963-01-01

    Seen in this picture is Noria Christophoridou, librarian of the Greek Atomic Energy Commission, who has been sent by her government to CERN for a year to widen her experience of library and documentation services. In the photograph she is providing information to Kurt Gottfried, a CERN visiting scientist from Harvard University, who is spending a year with CERN's Theory Division

  5. Spatial and temporal beam profile monitor with nanosecond resolution for CERN's Linac4 and Superconducting Proton Linac

    CERN Document Server

    Hori, M

    2008-01-01

    The Linac4, now being developed at CERN, will provide 160-MeV H- beams of high intensity . Before this beam can be injected into the CERN Proton Synchrotron Booster or future Superconducting Proton Linac for further acceleration, some sequences of 500-ps-long micro-bunches must be removed from it, using a beam chopper. These bunches, if left in the beam, would fall outside the longitudinal acceptance of the accelerators and make them radioactive. We developed a monitor to measure the time structure and spatial profile of this chopped beam, with respective resolutions and . Its large active area and dynamic range also allows investigations of beam halos. The ion beam first struck a carbon foil, and secondary electrons emerging from the foil were accelerated by a series of parallel grid electrodes. These electrons struck a phosphor screen, and the resulting image of the scintillation light was guided to a thermoelectrically cooled, charge-coupled device camera. The time resolution was attained by applying high-...

  6. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t9-Nov-10\t10-Nov-10\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4...

  7. Become a CERN WhiteHat

    CERN Multimedia

    CERN. Geneva

    2014-01-01

    Discovering CERN's weaknesses is as important as ever. Become a CERN WhiteHat and help us poking around CERN computing services and web applications. All you need is to apply and get the appropriate training...

  8. First ATLAS Barrel Toroid coil casing arrives at CERN

    CERN Multimedia

    2002-01-01

    The first of eight 25-metre long coil casings for the ATLAS experiment's barrel toroid magnet system arrived at CERN on Saturday 2 March by road from Heidelberg. This structure will be part of the largest superconducting toroid magnet ever made.   The first coil casing for the toroidal magnets of Atlas arrives at Building 180. This is the start of an enormous three-dimensional jigsaw puzzle. Each of the eight sets of double pancake coils will be housed inside aluminium coil casings, which in turn will be held inside a stainless steel vacuum vessel. A huge construction, the casing that arrived at CERN measures 25 metres in length and 5 metres in width. It weighs 20 tones. And this is just the beginning of the toroid jigsaw: by early April a batch of four double pancake coils, which altogether weighs 65 tones, will arrive from Ansaldo in Italy. The first vacuum vessel will also be arriving from Felguera in Spain this month. It will take about two years for all these 25 m long structures of casings, coils a...

  9. CERN Club Football wins 40 year old tradition cup

    CERN Multimedia

    Dave Underhill

    2016-01-01

    Already two weeks since the CERN football team, representing the Dave Underhill XI in the annual match with the Geneva Scottish Football Club, made a late, late rally to win the Jean Pierre Fillettaz Trophy. They started well with some good passing movements, but the Scots were also playing well and began to take control towards the end of the first half. Then, following a series of poor finishing and good goalkeeping by the CERN keeper, they finally found the back of the net, and the lads in white trooped off for well-earned oranges and water, just 1-0 down at half time. The second half was again evenly matched, but while we were not making the goal chances the Scots were squandering theirs. THEN with just 10 minutes to go a sudden resurgence of energy and aggression, the CERNites made the chances which counted, and in the space 5 minutes turned the score around and were happy to hear the final whistle and celebrate a famous 2-1 victory. Victory and commiserations were celebrated in the "Club Ho...

  10. Synthesis and Characterization of the Rubidium Thiophosphate Rb 6 (PS 5 )(P 2 S 10 ) and the Rubidium Silver Thiophosphates Rb 2 AgPS 4 , RbAg 5 (PS 4 ) 2 and Rb 3 Ag 9 (PS 4 ) 4

    KAUST Repository

    Alahmary, Fatimah S.; Davaasuren, Bambar; Khanderi, Jayaprakash; Rothenberger, Alexander

    2016-01-01

    The metal thiophosphates Rb2AgPS4 (2), RbAg5(PS4)2 (3), and Rb3Ag9(PS4)4 (4) were synthesized by stoichiometric reactions, whereas Rb6(PS5)(P2S10) (1) was prepared with excess amount of sulfur. The compounds crystallize as follows: 1 monoclinic, P21

  11. Iran approaches CERN

    CERN Multimedia

    2002-01-01

    Members of Parliament from the Islamic Republic of Iran visit SM18. From left to right : Ali Mojtahed-Shabestari, Deputy Ambassador of the Islamic Republic of Iran in Geneva, Diether Blechschmidt, from CERN, Abdol-Rahim Baharvand and Hossain Amiri, from the Iranian Parliament, Norbert Siegel, from CERN, Hossain Afarideh, Rasool Seddighi and Ahmad Shirzad from the Iranian Parliament. Five members of the Parliament of the Islamic Republic of Iran visited CERN for three days at the beginning of May. All of them have PhD's in Physics, as well as holding their job in politics. They are involved in legislation for science, research and education funding in Iran. Apart from their interest in CERN in general, they were especially attracted to the CMS detector, since an Iranian contribution to the LHC is now starting through a collaboration with the Institute for Studies in Theoretical Physics and Mathematics in Tehran.

  12. Design of a 120 MeV $H^{-}$ Linac for CERN High-Intensity Applications

    CERN Document Server

    Gerigk, F

    2002-01-01

    The SPL (Superconducting Proton Linac) study at CERN foresees the construction of a 2.2 GeV linac as a high beam-power driver for applications such as a second-generation radioactive ion beam facility or a neutrino superbeam. At the same time such a high-performance injector would both modernize and improve the LHC injection chain. The 120 MeV normal-conducting section of the SPL could be used directly in a preliminary stage for H- charge-exchange injection into the PS Booster. This would increase the proton flux to the CERN experiments while also improving the quality and reliability of the beams for the LHC. The 120 MeV linac consists of a front-end, a conventional Drift Tube Linac (DTL) to 40 MeV and a Cell Coupled Drift Tube Linac (CCDTL) to the full energy. All the RF structures will operate at 352 MHz, using klystrons and RF equipment recovered from the LEP collider. This paper concentrates on the design of the 3 to 120 MeV section. It introduces the design criteria for high-stability beam optics and th...

  13. A 96-channel, 500 ps resolution TDC board for the BaBar experiment at SLAC

    CERN Document Server

    Minutoli, S

    2000-01-01

    A TDC board has been designed and built to complete the readout of the Instrumented Flux Return of the BABAR experiment at the Stanford Linear Accelerator Center. The board has 96 input channels and makes use of 3 general purpose TDC chips designed at CERN, with time resolution up to 500 ps and configurable via a Test Access Port (IEEE standard 1149). Data are stored before readout in a multievent buffer. Communication with BABAR DAQ system is realized through 3 serial lines on the backplane connector. All the logic, including internal registers and the interfaces with the BABAR protocol and the TAP controller, is implemented in two fast FPGAs. The board is designed to work at 59.5 MHz clock frequency. (7 refs).

  14. CERN: SC-33

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1991-06-15

    On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service.

  15. CERN Infrastructure Evolution

    CERN Document Server

    Bell, Tim

    2012-01-01

    The CERN Computer Centre is reviewing strategies for optimizing the use of the existing infrastructure in the future, and in the likely scenario that any extension will be remote from CERN, and in the light of the way other large facilities are today being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote computer centres. This presentation will give the details on the project’s motivations, current status and areas for future investigation.

  16. CERN and Portugal

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    In its continual tour of CERN Member States, the European Committee for Future Accelerators (ECFA) visited Lisbon, Portugal, on 21-22 April, where it met at the Instituto Superiore Tecnico, a technical university with 9,000 students. Portuguese particle physics is in a particularly healthy situation, having developed considerably following Portugal's admission to CERN in 1985. With support from Brussels, scientific infrastructure has developed rapidly, although the science base has yet to attain the levels seen in larger nations. The 45-strong population of experimentalists in Portugal, including 14 PhDs, represents a 2.5-fold increase since Portugal joined CERN ten years ago and is in line with the goal stated at the time. This successful development of experimental particle physics has benefited much from physicists returning from abroad (mainly France and the UK). The direct result of the efforts of a few individuals (notably J.M. Gago), this splendid achievement provides an excellent role model for new and potential CERN Member States. At present, particle physics represents some 3 0% of all Portuguese physics publications. This very special role (and the financial support it implies) provides a visible target, but one which can be defended as it provides a catalyst for other national scientific developments. The national hub is the Laboratory for experimental high energy physics and related R&D projects (LIP), with centres in Lisbon (Head, J.M. Gago) and Coimbra (Head, A. Policarpo). LIP, with close links to two universities in Lisbon and to the University of Coimbra, has developed into a centre of expertise and training in electronics, computing and software engineering. Present LIP funding is some 2 million Swiss francs/year (70% in Lisbon and 3 0% in Coimbra), covering most of the salaries of the nonuniversity people, the remainder being supported by grants from Portuguese and European programmes. Portugal's contribution to CERN's 1995 budget

  17. CERN and Israel

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Israel (along with the US, Japan, Canada, the Russian Federation and India) is one of the CERN non- Member State nations targeted for substantial future participation in CERN's experimental programme, in particular for the LHC proton collider to be built in the 27-kilometre LEP tunnel and which was formally approved by CERN Council in December (January/February, page 1). In keeping with their illustrious scientific traditions, Israeli experimental physicists have collaborated in experiments at many of the world's major high energy Laboratories - Brookhaven, Fermilab and SLAC in the US, and in Europe, DESY, Hamburg, as well as CERN. However CERN, as the geographically closest major Laboratory (as well as the largest), plays a special role for Israeli scientists. At CERN, the advent of preparations in the early 1980s for the experimental programme at the LEP electron-positron collider was the signal for Israeli researchers to mount a concerted effort and contribute to one of the experiments - Opal - at a level comparable to that of major nations. This allowed Israeli teams to participate fully in the planning and construction phase of this branch of Big Science. Underlining this commitment, and to coordinate the various national agencies involved in this aspect of Big Science, in 1983 the Israel Commission for High Energy Physics (ICHEP) was formed. It is currently chaired by David Horn of Tel Aviv. The initial ICHEP/CERN contract established the official CERN/lsrael link under which, in the short-term, teams from three major research centres - the Weizmann Institute, Tel- Aviv University, and Haifa's Technion - contributed to Opal, as the flagship experiment, while providing a framework for longer-term collaboration. (At CERN, Israeli physicists also participate in the NA45 heavy ion experiment and the NA47 Spin Muon Collaboration - SMC.) Opal groups some 320 scientists from 32 research centres in eight countries, and includes a 21-strong Israeli

  18. Lectures for CERN pensioners

    CERN Multimedia

    SC Unit

    2008-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  19. Romanian President Visits CERN

    CERN Multimedia

    2001-01-01

    Director General Luciano Maiani watches as Romanian President Ion Iliescu signs the CERN guest book. On Friday the 12th of October, Romanian President Ion Iliescu arrived at CERN and was warmly greeted by Director General Luciano Maiani at the steps of building 500. After initial greetings and a general presentation of the laboratory, President Iliescu and his entourage embarked on a whistle stop tour of the CERN facilities. They visited the CMS magnet assembly hall and civil engineering work where presentations were made by CMS spokesperson Michel Della Negra and the ATLAS Tile Calorimeter where the president was introduced to Romanian physicists working here at CERN. Michel Della Negra explains some of the general principles behind CMS to President Iliescu during his visit last week. The Romanian teams working on CERN projects make very visible contributions, for example to the construction of the ATLAS experiment and to the preparation of its eventual scientific exploitation. 'Those of us on the ATLAS ...

  20. EU Commissioner visits CERN

    CERN Multimedia

    2005-01-01

    European Commissioner Viviane Reding in front of one of the computers showing how the Grid works and, from left to right, Robert Aymar, CERN's Director-General, Wolfgang von Rüden, Head of the Information Technology Department, and Bob Jones, the newly appointed director of the EGEE project since 1st November. Viviane Reding, European Commissioner for Information Society and Media, visited CERN on 28 October. Accompanied throughout by CERN's Director-General, Robert Aymar, and the Head of the Information Technology Department, Wolfgang von Rüden, the Commissioner visited the ATLAS cavern before going on to the Information Technology Department, where she was given a complete overview of CERN's activities in the strategic field of Grid computing. Viviane Reding's visit coincided with the end of the EGEE (Enabling Grids for E-sciencE) conference, which took place in Pisa in Italy. Co-ordinated by CERN and funded by the European Commission, the EGEE project aims to set up a worldwide grid infrastructure for sc...

  1. Spaceflight participant visits CERN!

    CERN Multimedia

    Kathryn Coldham

    2016-01-01

    On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

  2. Punctualizaciones del CERN

    CERN Multimedia

    2002-01-01

    "Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

  3. The CERN PC farm

    CERN Multimedia

    Serge Bellegarde

    2005-01-01

    Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing the processing power to be shared between computer centres around the world.

  4. CERN meets Facebook

    CERN Multimedia

    2012-01-01

    Social networking sites like LinkedIn, MySpace, Google+ and Facebook are on the rise. In particular, the life of youngsters revolves more and more around these sites as they facilitate communication, networking and the exchange of niceties. Who does not today already have an account registered with one of them? A Facebook profile can contain photos, listings of hobbies, job information, preferences…   The on-going effort to externalise some of CERN's computing resources continues, and in order to promote a unified interface for personal information, CERN has decided to establish a partnership with Facebook starting on 1stApril. "CERN is a public and trustworthy international organisation, and as such, our staff and users have nothing to hide from the general public," said Alexi Spiner (IT), project leader responsible for this migration: * The computer profiles of all CERN users will be integrated into the Facebook portal; * In addition, we will also ...

  5. Safety at CERN

    CERN Document Server

    2009-01-01

    Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

  6. DESY greets CERN

    CERN Multimedia

    Helmut Dosch, Chairman of the DESY Board of Directors, continues the series of occasional exchanges between CERN and other laboratories world-wide. As part of this exchange, CERN Director-General Rolf Heuer wrote a message in DESY inForm. Helmut Dosch took over from Albrecht Wagner in March 2009. You may think that the connections between CERN and DESY are obvious – particle physics labs with record-breaking accelerators and users from all around the world trying to solve mankind’s great mysteries. We even exchanged a few Directors. But did you know that there are similarities that are much closer to home – for example that both labs have names for their staff in the host language that are untranslatable into English? You are CERNoises and CERNois, we are DESYanerinnen and DESYaner. And in the end it’s the people it all comes down to. We at DESY admire the resourcefulness, enthusiasm, dedication and perseverance with which you at CERN have designed, built, started ...

  7. CERN stationery rejuvenated

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    With the introduction of CERN’s new graphic charter, our complete range of official communications stationery has been redesigned. Discover the newly harmonised and standardised range of CERN stationery.   As the Director-General announced in Bulletin 41-42/2012, a new graphic charter is now in force at CERN. The graphics team has taken this opportunity to redesign all the official CERN stationery, such as business cards, correspondence cards, letterheads, envelopes and file holders, all of which will now boast the same, unified format. In keeping with CERN’s new graphic charter, even the business cards have had a makeover: of a better quality than their predecessors, they now elegantly display the CERN colours (namely the familiar Pantone 286 blue). These new cards, which all follow a standardised format, help to project a standardised corporate image of the Organization. Order them online now! As the Director-General highlighted, “it's increasingly imp...

  8. Cern Golf Club

    CERN Document Server

    Cern Golf Club

    2014-01-01

      The Cern Golf Club   Members are here with invited to the: Annual General Meeting which takes place Wednesday evening the 5th February 2014 at 18h00 in the Conference room in bldg 13-2-005. A committee member will be at CERN gate B, 17h50 and accompany “external” CGC members to the conference room. Agenda: 1. President’s report 2. Treasurer’s report 3. Election of the Committee for 2014 4. Election of  Auditors 5. Draft schedule for 2014 CGC-competitions and other events 6. “Corpo” report    7. Proposals and any other business Please forward any proposals (to any of the committee members) you have, including candidature for the 2014 committee minimum three days in advance before the meeting.      Cern Golf Club   Les membres de club de golf de CERN sont invités à l’Assemblée Géné...

  9. Italy's Prime Minister visits CERN

    CERN Multimedia

    Stefania Pandolfi

    2015-01-01

    On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

  10. CERN openlab Summer Student Programme

    CERN Multimedia

    2012-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 30 March 2012.   The openlab Summer Student Programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 8 weeks at CERN, during the period June to September 2012, to work with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire the students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN related high-throughput computing. Study tours to external companies and universities as well as to CERN facilities are also part of the programme. Please visit www.cern.ch/openlab-students for more information.

  11. CERN openlab summer student programme

    CERN Multimedia

    2013-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 31 March 2013.   The openlab summer student programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 9 weeks at CERN, during the period from June to September 2013, working with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN-related high-throughput computing. Study tours of external companies and universities as well as of CERN facilities are also part of the programme. Please visit the CERN openlab website for more information.

  12. CERN HEALTH INSURANCE SCHEME (CHIS)

    CERN Multimedia

    HR Department

    2002-01-01

    List of benefits for 2002 The CHIS list of benefits for 2002 is now available from the HR Division Website (under 'general information'). We wish to draw your attention to the fact that the copies of this list available at the CERN UNIQA Office are intended ONLY for CERN pensioners. CERN staff members are therefore kindly requested to print this list themselves from the Web. English version HERE We would like to take this opportunity to remind staff members that they should obtain medical expenses claim forms from their divisional secretariat and NOT from the CERN UNIQA Office, which has a limited supply intended for CERN pensioners ONLY. Human Resources Division Tel: 73635

  13. Measurement of the mean radial position of a lead ion beam in the CERN PS

    CERN Document Server

    Belleman, J; González, J; Johnston, S; Schulte, E C; Thivent, E

    1996-01-01

    The intensity of the lead ion beam in the PS, nominally 4×108 charges of Pb53+ per bunch, is too low for the closed orbit measurement system. However, for successful acceleration it is sufficient to know the mean radial position (MRP). A system was thus designed for simultaneous acquisition of revolution frequency and magnetic field. The frequency measurement uses a direct digital synthesiser (DDS), phase-locked to the beam signal from a special high-sensitivity pick-up. The magnetic field is obtained from the so-called B-train. From these two values, the MRP is calculated. The precision depends on the frequency measurement and on the accuracy of the value for the magnetic field. Furthermore, exact knowledge of the transition energy is essential. This paper describes the hardware and software developed for the MRP system, and discusses the issue of calibration, with a proton beam, of the B measurement.

  14. Radiation protection activities around the CERN accelerators

    International Nuclear Information System (INIS)

    Fasso, A.

    1996-01-01

    In 1995 several operational circumstances required careful watching by the Radiation Protection Group. Most of these were linked with new or recently started CERN activities: for instance the increasing importance assumed by ISOLDE operation and the breakdowns encountered which have given rise to contamination of the target region and to activity releases. In the SPS ring, several difficulties were brought about by a toilsome installation of a new interlock system, while lead ion operation marked the end of the year, as usual, with higher radiation levels in the SPS experimental areas, despite the fact that existing shielding had been improved. Also at the end of the year, the increase of LEP beam energy to 68 GeV caused a rise of dose rate levels from synchrotron radiation. This was expected, but studies are still needed to assess the full implications for different aspects of radiation protection. On the other hand, the ageing of magnet coils and other equipment (insulators, cables, flexible pipes), aggravated by the high proton beam intensities, has resulted in an increasing frequency of failures (mainly water leaks) both at the PS and at the SPS. If the apparent trend is confirmed, difficulties could be expected in the future for two reasons: the shortage of specialized staff, some of them approaching the CERN dose limit of 15 mSv annually, who can be assigned to repair work; and the lack of spare parts to replace the damaged items. Luckily, the long cooling times following high intensity proton runs provided by the operation with heavy-ions and by the winter shutdown mitigate this situation

  15. Gamma-induced Positron Spectroscopy (GiPS) at a superconducting electron linear accelerator

    International Nuclear Information System (INIS)

    Butterling, Maik; Anwand, Wolfgang; Cowan, Thomas E.; Hartmann, Andreas; Jungmann, Marco; Krause-Rehberg, Reinhard; Krille, Arnold; Wagner, Andreas

    2011-01-01

    A new and unique setup for Positron Annihilation Spectroscopy has been established and optimized at the superconducting linear electron accelerator ELBE at Helmholtz-Zentrum Dresden-Rossendorf (Germany). The intense, pulsed (26 MHz) photon source (bremsstrahlung with energies up to 16 MeV) is used to generate positrons by means of pair production throughout the entire sample volume. Due to the very short gamma bunches (< 5 ps temporal length), the facility for Gamma-induced Positron Spectroscopy (GiPS) is suitable for positron lifetime spectroscopy using the accelerator's radiofrequency as time reference. Positron lifetime and Doppler broadening Spectroscopy are employed by a coincident measurement (Age-Momentum Correlation) of the time-of-arrival and energy of the annihilation photons which in turn significantly reduces the background of scattered photons resulting in spectra with high signal to background ratios. Simulations of the setup using the GEANT4 framework have been performed to yield optimum positron generation rates for various sample materials and improved background conditions.

  16. Gamma-induced Positron Spectroscopy (GiPS) at a superconducting electron linear accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Butterling, Maik, E-mail: maik.butterling@googlemail.com [Martin-Luther University, Dept. of Physics, 06099 Halle (Germany); Institute of Radiation Physics, Helmholtz-Zentrum, Dresden-Rossendorf, P.O. Box 510119, 01314 Dresden (Germany); Anwand, Wolfgang; Cowan, Thomas E.; Hartmann, Andreas [Institute of Radiation Physics, Helmholtz-Zentrum, Dresden-Rossendorf, P.O. Box 510119, 01314 Dresden (Germany); Jungmann, Marco; Krause-Rehberg, Reinhard [Martin-Luther University, Dept. of Physics, 06099 Halle (Germany); Krille, Arnold; Wagner, Andreas [Institute of Radiation Physics, Helmholtz-Zentrum, Dresden-Rossendorf, P.O. Box 510119, 01314 Dresden (Germany)

    2011-11-15

    A new and unique setup for Positron Annihilation Spectroscopy has been established and optimized at the superconducting linear electron accelerator ELBE at Helmholtz-Zentrum Dresden-Rossendorf (Germany). The intense, pulsed (26 MHz) photon source (bremsstrahlung with energies up to 16 MeV) is used to generate positrons by means of pair production throughout the entire sample volume. Due to the very short gamma bunches (< 5 ps temporal length), the facility for Gamma-induced Positron Spectroscopy (GiPS) is suitable for positron lifetime spectroscopy using the accelerator's radiofrequency as time reference. Positron lifetime and Doppler broadening Spectroscopy are employed by a coincident measurement (Age-Momentum Correlation) of the time-of-arrival and energy of the annihilation photons which in turn significantly reduces the background of scattered photons resulting in spectra with high signal to background ratios. Simulations of the setup using the GEANT4 framework have been performed to yield optimum positron generation rates for various sample materials and improved background conditions.

  17. CERN: SC-33

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service

  18. High-throughput preparation of complex multi-scale patterns from block copolymer/homopolymer blend films

    Science.gov (United States)

    Park, Hyungmin; Kim, Jae-Up; Park, Soojin

    2012-02-01

    A simple, straightforward process for fabricating multi-scale micro- and nanostructured patterns from polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP)/poly(methyl methacrylate) (PMMA) homopolymer in a preferential solvent for PS and PMMA is demonstrated. When the PS-b-P2VP/PMMA blend films were spin-coated onto a silicon wafer, PS-b-P2VP micellar arrays consisting of a PS corona and a P2VP core were formed, while the PMMA macrodomains were isolated, due to the macrophase separation caused by the incompatibility between block copolymer micelles and PMMA homopolymer during the spin-coating process. With an increase of PMMA composition, the size of PMMA macrodomains increased. Moreover, the P2VP blocks have a strong interaction with a native oxide of the surface of the silicon wafer, so that the P2VP wetting layer was first formed during spin-coating, and PS nanoclusters were observed on the PMMA macrodomains beneath. Whereas when a silicon surface was modified with a PS brush layer, the PS nanoclusters underlying PMMA domains were not formed. The multi-scale patterns prepared from copolymer micelle/homopolymer blend films are used as templates for the fabrication of gold nanoparticle arrays by incorporating the gold precursor into the P2VP chains. The combination of nanostructures prepared from block copolymer micellar arrays and macrostructures induced by incompatibility between the copolymer and the homopolymer leads to the formation of complex, multi-scale surface patterns by a simple casting process.A simple, straightforward process for fabricating multi-scale micro- and nanostructured patterns from polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP)/poly(methyl methacrylate) (PMMA) homopolymer in a preferential solvent for PS and PMMA is demonstrated. When the PS-b-P2VP/PMMA blend films were spin-coated onto a silicon wafer, PS-b-P2VP micellar arrays consisting of a PS corona and a P2VP core were formed, while the PMMA macrodomains were isolated, due to the

  19. Thermostructural characterization and structural elastic property optimization of novel high luminosity LHC collimation materials at CERN

    Science.gov (United States)

    Borg, M.; Bertarelli, A.; Carra, F.; Gradassi, P.; Guardia-Valenzuela, J.; Guinchard, M.; Izquierdo, G. Arnau; Mollicone, P.; Sacristan-de-Frutos, O.; Sammut, N.

    2018-03-01

    The CERN Large Hadron Collider is currently being upgraded to operate at a stored beam energy of 680 MJ through the High Luminosity upgrade. The LHC performance is dependent on the functionality of beam collimation systems, essential for safe beam cleaning and machine protection. A dedicated beam experiment at the CERN High Radiation to Materials facility is created under the HRMT-23 experimental campaign. This experiment investigates the behavior of three collimation jaws having novel composite absorbers made of copper diamond, molybdenum carbide graphite, and carbon fiber carbon, experiencing accidental scenarios involving the direct beam impact on the material. Material characterization is imperative for the design, execution, and analysis of such experiments. This paper presents new data and analysis of the thermostructural characteristics of some of the absorber materials commissioned within CERN facilities. In turn, characterized elastic properties are optimized through the development and implementation of a mixed numerical-experimental optimization technique.

  20. Thermostructural characterization and structural elastic property optimization of novel high luminosity LHC collimation materials at CERN

    Directory of Open Access Journals (Sweden)

    M. Borg

    2018-03-01

    Full Text Available The CERN Large Hadron Collider is currently being upgraded to operate at a stored beam energy of 680 MJ through the High Luminosity upgrade. The LHC performance is dependent on the functionality of beam collimation systems, essential for safe beam cleaning and machine protection. A dedicated beam experiment at the CERN High Radiation to Materials facility is created under the HRMT-23 experimental campaign. This experiment investigates the behavior of three collimation jaws having novel composite absorbers made of copper diamond, molybdenum carbide graphite, and carbon fiber carbon, experiencing accidental scenarios involving the direct beam impact on the material. Material characterization is imperative for the design, execution, and analysis of such experiments. This paper presents new data and analysis of the thermostructural characteristics of some of the absorber materials commissioned within CERN facilities. In turn, characterized elastic properties are optimized through the development and implementation of a mixed numerical-experimental optimization technique.

  1. Follow-up research at CERN

    International Nuclear Information System (INIS)

    1993-01-01

    At The European Center for High Energy Physics (Conseil Europeen de Recherche Nucleaire - CERN) basic research is carried out based on some of the world's largest particle accelerators, especially the Large Electron Positron collider (LEP). Danish membership of CERN gives Danish physicists access to these machines and the Accelerator Committee offers advice on their utilization and related financing. Danish research carried out at CERN is described, based on contributions from individual research groups. The functions, administration and budgets of the Accelerator Committee are explained in addition to other forms of administration connected with CERN, such as the Danish CERN Delegation, and an evaluation of Danish experimentation within physics is presented. Information is given on individual Danish members of the CERN groups of scientists and a list of the publications of international research groups which include Danish subjects, covering the years 1991-93, is presented. The publication is related to the delegation of grants for research projects carried out by Danish physicists. (AB)

  2. CERN openlab enters fifth phase

    CERN Multimedia

    Andrew Purcell

    2015-01-01

    CERN openlab is a unique public-private partnership between CERN and leading ICT companies. At the start of this year, openlab officially entered its fifth phase, which will run until the end of 2017. For the first time in its history, it has extended beyond the CERN community to include other major European and international research laboratories.   Founded in 2001 to develop the innovative ICT systems needed to cope with the unprecedented computing challenges of the LHC, CERN openlab unites science and industry at the cutting edge of research and innovation. In a white paper published last year, CERN openlab set out the main ICT challenges it will tackle during its fifth phase, namely data acquisition, computing platforms, data storage architectures, computer management and provisioning, networks and connectivity, and data analytics. As it enters its fifth phase, CERN openlab is expanding to include other research laboratories. "Today, research centres in other disciplines are also st...

  3. LabVIEW Support at CERN

    CERN Multimedia

    HR Department

    2010-01-01

    Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

  4. CERN's technical apprentices during their apprenticeships

    CERN Multimedia

    Adrian Billet

    2004-01-01

    CERN starting training apprentices in 1966 at the request of the Geneva authorities. The programme was consolidated with the opening of the training centre in 1971. In recent years CERN has taken on seven new technical apprentices each year (four in electronics, three in physics laboratory work), plus one or two administrative apprentices, such that there always are around 30 apprentices in total at CERN. The programme is highly regarded in Geneva by the authorities, industry, schools and young people, and contributes very positively to CERN's local image. Since the beginning 160 young people have now successfully completed their apprenticeships at CERN. Unlike some other employers, as a general rule CERN does not take on its ex-apprentices as staff; on completing their years at CERN the apprentices usually go on to higher education or are sought after by other employers.

  5. Symmetry of dipositronium Ps2

    International Nuclear Information System (INIS)

    Schrader, D.M.

    2004-01-01

    We work out the complete symmetry and spin problem for diatomic positronium Ps 2 for the ground and singly excited states of zero orbital angular momentum. The general form of the wave function for each state is given, with due regard to charge conjugation parity. Annihilation rates are discussed, and correlations to dissociation products are deduced. We indicate how the approach is extensible to larger aggregates: i.e., PsPs n , n>2

  6. Environmental radiation monitoring on the CERN sites and in the CERN environment during 1998

    Energy Technology Data Exchange (ETDEWEB)

    Vojtyla, P; Wittekind, D

    1999-04-15

    As a consequence of changes in the administrative structure of TIS Division in 1996 and 1997, the Environmental Section was integrated into the TIS Technical Services and Environment Group that also looks after the non-radiation parameters in the CERN releases and environment. However, it remains the duty of the Radiation Protection Group (RP) to define the environmental programme for radiation and radioactivity, and of the leader of RP to report its results both inside and outside CERN. Part I of this Annual Report describes the results of measurements which are relevant for assessing the radiological impact of CERN's activities on the environment and the population living in the vicinity of the CERN sites. Measurements of radioactivity released into the atmosphere and into water, as well as measurements of stray radiation at or near the CERN site boundaries, are reported.

  7. Diversity at CERN: is it sometimes a challenge?

    CERN Multimedia

    Antonella Del Rosso

    2012-01-01

    The first diversity interaction workshop took place on 8 March. Although the choice of date was intended as a tribute to women, the real focus of the event was raising awareness about all types of diversity at CERN.   During the workshop, the participants worked in small groups to discuss diversity. The seminar was attended by 32 people, a relatively small number if one considers how many people are working on the CERN site. Does this mean that diversity is not an issue? I would rather say that, given the international and multi-faceted character of the Laboratory, diversity is taken for granted in many cases but, thanks to the seminar, I also realized that there may be issues hiding behind different types of behaviour. The discussion was very useful in raising awareness about this fact. As summarised by Anne-Sylvie Catherin, HR Head, “Diversity is certainly one of our strengths but it needs to be continually nurtured”. The workshop started with a short film showing how ...

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - 2 - French C++ Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - 3 - English C++ Part 2: Object-Oriented and Generic Programming - 3-Nov-09 - 6-Nov-09 - 4 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - 2 - English Developing secure software - 07-DEC-09 - 07-DEC-09 - 0.5 - English Emacs - way beyond Text Editing - 29-Oct-09 - 29-Oct-09 - 1 - English Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - 4 - English JAVA - Level 2 - 16-Nov-09 - 19-Nov-09 - 4 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - 2 - English JCOP - Finite State Machines in the JCOP Framework - 10-No...

  9. CERN Library | Mario Campanelli presents "Inside CERN's Large Hadron Collider" | 16 March

    CERN Multimedia

    CERN Library

    2016-01-01

    "Inside CERN's Large Hadron Collider" by Mario Campanelli. Presentation on Wednesday, 16 March at 4 p.m. in the Library (bldg 52-1-052) The book aims to explain the historical development of particle physics, with special emphasis on CERN and collider physics. It describes in detail the LHC accelerator and its detectors, describing the science involved as well as the sociology of big collaborations, culminating with the discovery of the Higgs boson.  Inside CERN's Large Hadron Collider  Mario Campanelli World Scientific Publishing, 2015  ISBN 9789814656641​

  10. CERN Technical Training 2002: Learning for the LHC! Introduction à la CAO CADENCE - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Dans le cadre du suivi du programme ELEC-2002 : Electronics in HEP, une nouvelle session du cours Introduction à la CAO CADENCE. De la saisie de schéma Concept-HDL au PCB est programmée pour le 4 et 5 juin prochains. Le cours, en français, est gratuit et sera animé par Serge Brobecker de la division IT/PS/EAS. Objectif de cette formation est de donner une vue générale du système CAO CADENCE utilisé au CERN, et d'en connaître l'environnement et les possibilités, en acquérant des notions suffisantes pour utiliser la saisie de schéma. Le cours est ciblé pour une audience d'ingénieurs et techniciens désirant utiliser les outils CAO disponibles au CERN, afin de concevoir des circuits logiques et des circuits programmables digitaux. Plus d'information, et possibilité d'inscription par EDH sont accessibles depuis les pages «...

  11. Quantification of CERN's economic spin-off

    International Nuclear Information System (INIS)

    Bianchi-Streit, M.; Blackburne, N.; Budde, R.; Reitz, H.; Sagnell, B.; Schorr, B.; Schmied, H.

    1986-01-01

    A condensed version is given of CERN report ''Economic utility resulting from CERN contracts'' by the same authors, which attempts to quantify the economic benefit to high technology manufacturing industries involved in CERN contracts, in relation to their sales to CERN. It covers the period 1973 to 1987 and complements an earlier study made in 1973-1975. Interviews were carried out in 166 European firms of which the majority supplied estimates of increased sales and cost savings due to CERN contracts. This ''economic utility'' totals 3107 million Swiss francs (up to the year 1987) compared to sales to CERN in 1973 to 1982 amounting to 748 million Swiss francs in 1982 prices. It is estimated that, by 1987, CERN's high technology purchases made in 1973 to 1982 will have generated economic utility amounting to about 60% of the overall cost of the organization during the same period. (author)

  12. CERN technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and system technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\t2\tEnglish C++ Part 2: Object-Oriented and Generic Programming\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t07-DEC-09\t07-DEC-09\t0.5\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\t4\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-Nov-09\t12-Nov-09\t3\tEnglish JCOP - Joint PVSS-JCOP Framework\t23-Nov-09\t27-Nov-09\t4.5\tEnglish Oracle Database SQL Tuning\t07-DEC-09\t09-DEC-09\t3\tEnglish Oracle Databases: Advanced PL/SQL Programming\t2-Nov-09\t4-Nov-09\t3\tEnglish PERL 5 - Advanced Aspects\t10-DEC-09\t10-DEC-09\t1\tEnglish Proje...

  13. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\t2\tEnglish C++ Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Part 2: Object-Oriented and Generic Programming\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t07-DEC-09\t07-DEC-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\t4\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-Nov-09\t12-Nov-09\t3\tEnglish JCOP - Joint PVSS-JCOP Framework\t23-Nov-09\t27-Nov-09\t4.5\tEnglish Oracle Database SQL Tuning\t07-DEC-09\t09-DEC-09\t3\tEnglish Oracle D...

  14. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  15. Women at CERN

    CERN Multimedia

    2004-01-01

    To mark International Women's Day on 8 March, the Weekly Bulletin has looked at the careers of six female physicists, engineers and administrators working at CERN. A frequent question on the lips of newcomers to CERN as they take a quick look around them is 'But where are the women?' However, while it's true that the Laboratory has never had a huge number of female personnel, a closer look reveals that there are in fact quite a few around. To mark International Women's Day, the Bulletin has interviewed six women working at CERN to find out how they see the Organization, what they do and what they think about their daily working lives. Creating a link 'Maybe because I grew up during World War II, my parents always taught me to respect people of other nationalities, religions, colour, etc., so one thing I have always appreciated about CERN is that it promotes this tolerance and understanding by giving us the great privilege of working side by side with colleagues from many cultures and walks of life.' Pegg...

  16. CERN in detail

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    Before, you had to go on the TPG website to find a tram-route, use Google Maps to see an aerial photo of CERN, and look for CERN buildings on map.web.cern.ch. Now, that's ancient history, with a new Geographical Information System (GIS) Portal set up by the Design Office and Patrimony Service (GS/SEM/DOP).  It's a one-stop-shop for all this information and much more.   A screenshot of the GIS Portal. Over the past few days, you might have noticed the new interface called MAPSearch that pops up when you make a building search using the Building and Roads field on the CERN homepage. This is a simplified version of the new GIS web Portal, a project on which the GS Department's Design Office and Patrimony Service has been working since January 2010. "In today's informatics age, we need to respond ever more quickly to increasing numbers of specific user requests," explains Project Leader Youri Robert. This is more than just a new release of an old tool, it's a completely n...

  17. CERN's Guardian Angels

    CERN Multimedia

    2002-01-01

    Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

  18. CERN Cricket Club

    CERN Multimedia

    Staff Association

    2014-01-01

    CERN CRICKET CLUB   The CERN Cricket Club 2014 season has been a good one so far with the team qualifying for the Swiss Cup semi-finals, with home advantage on the Prevessin ground on Sunday, August 24th. Their opponents will only be known the day before when the final game in the Eastern Division is played.  The CERN ground hasn’t quite recovered from the Bosons&More party last year, the wet weather making it impossible to roll the ground, but the new, wider strip is a big improvement. Net practice eventually started in late July, which is probably why the results at the beginning of the season weren’t so good. As match reports are too long to be included in the weekly bulletin, the full reports and the schedule can be found under “Matches (Fixtures, results, reports)” on the Cricket Club web site at http://cern.ch/Club-Cricket/    Anyone interested in playing cricket is welcome to join us at net practice, which takes pla...

  19. CERN Women's club

    CERN Multimedia

    CERN Women's club

    2010-01-01

    The Welcome Center The Welcome Center website for CERN newcomers – and everyone else at CERN – has celebrated its first anniversary in operation. It began as a project to organize all the various information available at CERN into an easy to use site, with advice to help you make the most of your time here. It continues to be updated as new information becomes available. Lori Hakulinen and her helpers offer to meet with anyone who has questions. They can advise you on weekend activities, local restaurants and where to buy hard to find items or some of your favorite things from home, in addition to all of the practicalities you need to know, such as how to find housing or have a telephone installed, where to take language classes and much, much more. It’s all listed at: http://cern.ch/club-cwc-newcomers In general, meetings take place the first and third Thursdays in the month at Restaurant No. 1 in the Children’s Dining Room. (Please consult the Homepage for schedu...

  20. A Princess at CERN

    CERN Multimedia

    2009-01-01

    On 16 March HRH Princess Maha Chakri Sirindhorn of Thailand visited CERN for the third time. After meeting the Director-General, she toured the CMS experimental area and LHC tunnel with Coordinator for external relations Felicitas Pauss and CMS Spokesperson Jim Virdee. During her visit she took a particular interest in CERN’s education programme. From left to right, Emmanuel Tsesmelis, from the CERN Directorate’s office, Jim Virdee, CMS Spokesperson, the Princess of Thailand and Felicitas Pauss, CERN Coordinator for external relations.

  1. La Hollande au CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1995-01-01

    On 17 October the third industrial exhibition, "Holland at CERN" was officially opened by Dr R.J. van Duinen, President of the Dutch Organisation for Scientific Research (NWO). In his opening speech he encouraged scientific organisations such as CERN to take full advantage of industry's ability to design and invent new processes and equipment stressing that the purpose of the "Holland at CERN" exhibition was not simply to sell equipment, but to establish an efficient cross-fertilisation between fundamental science and industry.

  2. Cern Cricket Club

    CERN Multimedia

    Cern Cricket Club

    2014-01-01

      Cern Cricket Club The CERN Cricket Club 2014 season has started earlier than usual, with a game scheduled for the first time ever on Easter Sunday.  Due to repair work for the damage done to the ground because of the “Bosons&More” party at the end of September, all games until June have had to be scheduled away. Net practice, which normally takes place on the ground from mid-April, will not start until mid-June. The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/    

  3. CHOEUR DU CERN

    CERN Multimedia

    CHOEUR DU CERN

    2010-01-01

    Les répétitions du chœur du CERN reprendront le mercredi 15 septembre à 20.00 heures à l’amphithéâtre principal – bâtiment 500. Au programme la préparation de notre concert de Noël avec la Missa Brevis, KV115, de Léopold Mozart et de la musique de Noël d’Europe. Les personnes qui aiment chanter, notamment des sopranes et des ténors, sont les bienvenues. Pour tout contact s’adresser à : Baudouin Bleus - (tél.CERN 767 82 44) -(baudouin.bleus@cern.ch) ou Martin Gatehouse ( martin.gatehouse@wanadoo.fr) ou Jean-Paul Diss (jean-pauldiss@wanadoo.fr).  

  4. CERN Croquet club

    CERN Multimedia

    CERN Croquet Club

    2018-01-01

    The CERN Croquet Club warmly invites you to an “Open Day” at the CERN Croquet Club on Sunday afternoon, 1st July as of 14:00 We will show you how to play the different games and you can try them out yourselves. Croquet of course, but also the Japanese version, called Gateball, as well as Lawn Bowls, what one might call the British version of “Boules”. The Swiss Croquet Association will offer afternoon Tea and Cake For catering purposes, it would be nice if you can let us know in advance if you will be joining us. Friends and family ae welcome but they will require a CERN Access card. Hope to see you there.

  5. “Hangout” with CERN this Thursday

    CERN Multimedia

    2012-01-01

    Starting Thursday 1 November at 5 pm CET, CERN is launching a new weekly “Hangout with CERN” that will be broadcast live on Google+ and YouTube.   The first hangout will welcome virtual visitors to CERN. Over the coming weeks the CERN hangouts will be taking you around CERN, on visits experimental sites and to speak with physicists, engineers and more. But most importantly, they will be opportunities to answer your questions. You can post your questions in advance, either in the comment section on facebook or on Twitter to @CERN with the hashtag #askCERN. The best questions will be answered during the hangout, and participants may be invited to participate live! Find out more here.  

  6. Design study of the large hadron electron collider and a rapid cycling synchrotron as alternative to the PS booster upgrade at CERN

    International Nuclear Information System (INIS)

    Fitterer, Miriam

    2013-01-01

    With the Large Hadron Collider (LHC) the exploration of particle physics at center of mass energies at the TeV scale has begun. To extend the discovery potential of the LHC, a major upgrade is foreseen around 2020 of the LHC itself and the LHC injectors - the chain of accelerators preparing the beam for the LHC. One of the injectors - the second one in the chain - is the Proton Synchrotron (PS) Booster. Its performance is currently limited by the space-charge effect, which is the effect of the electromagnetic field of the particle beam on itself. This effect becomes weaker with higher energy, and therefore an energy upgrade of the PS Booster to 2 GeV maximum beam energy is foreseen. As the PS Booster is with its 40 years already an old machine, the construction of a new accelerator, a Rapid Cycling Synchrotron (RCS), to replace the PS Booster has been proposed. In this thesis different options for the beam guidance in the RCS - referred to as lattice and optics - are studied, followed by a more general comparison of different lattices and optics and their performance under consideration of the space-charge effect. To further complement the LHC physics program, also the possibility of deep inelastic lepton-nucleon scattering at the LHC has been suggested, referred to as Large Hadron Electron Collider (LHeC). In this case the proton beam of the LHC collides with the electron beam, which is accelerated in a separate newly built machine. Two options are considered as electron accelerator: a new energy recovery linac - the Linac-Ring option - and the installation of an electron ring in the existing LHC tunnel - the Ring-Ring option. One of the main challenges of the Ring-Ring option is the integration of the electron ring in the current LHC tunnel. A layout, lattice and optics of the electron accelerator is developed in this thesis, which meets the requirements with regard to integration and reaches the beam parameters demanded by the particle physics experiments.

  7. Design study of the large hadron electron collider and a rapid cycling synchrotron as alternative to the PS booster upgrade at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Fitterer, Miriam

    2013-02-22

    With the Large Hadron Collider (LHC) the exploration of particle physics at center of mass energies at the TeV scale has begun. To extend the discovery potential of the LHC, a major upgrade is foreseen around 2020 of the LHC itself and the LHC injectors - the chain of accelerators preparing the beam for the LHC. One of the injectors - the second one in the chain - is the Proton Synchrotron (PS) Booster. Its performance is currently limited by the space-charge effect, which is the effect of the electromagnetic field of the particle beam on itself. This effect becomes weaker with higher energy, and therefore an energy upgrade of the PS Booster to 2 GeV maximum beam energy is foreseen. As the PS Booster is with its 40 years already an old machine, the construction of a new accelerator, a Rapid Cycling Synchrotron (RCS), to replace the PS Booster has been proposed. In this thesis different options for the beam guidance in the RCS - referred to as lattice and optics - are studied, followed by a more general comparison of different lattices and optics and their performance under consideration of the space-charge effect. To further complement the LHC physics program, also the possibility of deep inelastic lepton-nucleon scattering at the LHC has been suggested, referred to as Large Hadron Electron Collider (LHeC). In this case the proton beam of the LHC collides with the electron beam, which is accelerated in a separate newly built machine. Two options are considered as electron accelerator: a new energy recovery linac - the Linac-Ring option - and the installation of an electron ring in the existing LHC tunnel - the Ring-Ring option. One of the main challenges of the Ring-Ring option is the integration of the electron ring in the current LHC tunnel. A layout, lattice and optics of the electron accelerator is developed in this thesis, which meets the requirements with regard to integration and reaches the beam parameters demanded by the particle physics experiments.

  8. Open Hardware at CERN

    CERN Multimedia

    CERN Knowledge Transfer Group

    2015-01-01

    CERN is actively making its knowledge and technology available for the benefit of society and does so through a variety of different mechanisms. Open hardware has in recent years established itself as a very effective way for CERN to make electronics designs and in particular printed circuit board layouts, accessible to anyone, while also facilitating collaboration and design re-use. It is creating an impact on many levels, from companies producing and selling products based on hardware designed at CERN, to new projects being released under the CERN Open Hardware Licence. Today the open hardware community includes large research institutes, universities, individual enthusiasts and companies. Many of the companies are actively involved in the entire process from design to production, delivering services and consultancy and even making their own products available under open licences.

  9. Ultrafast Readout of Scintillating Fibres Using Upgraded Position-Sensitive Photomultipliers

    CERN Multimedia

    2002-01-01

    % RD-17 \\\\ \\\\To design a high rate topological trigger device for the future DIRAC Experiment at CERN an extensive work is in progress on a scintillating-fibre detector using a position-sensitive photomultiplier. Several detector prototypes with different lengths ($<$~50~cm) of sensitive area have been tested at T7S~PS beam. \\\\ \\\\With 0.5~mm diameter fibres a spatial resolution of $\\sim$125~$\\mu$m was obtained with a detection efficiency higher than 95\\%. The time resolution is $\\sim$600~ps, and the track position is properly digitized in real time (about 10~ns) by multi-channel peak sensing circuit. Based on experimental data simulations were also performed a comparison of different types of front-end electronics for multi-channel readout.

  10. People and things. CERN Courier, March 1982, v. 22(2)

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. From 3-6 May, a 'Workshop on Accelerator Orbit and Particle Tracking Programs' will be held at Brookhaven. The focus will be primarily on computer simulation of non-linear magnetic effects as they influence beam lifetime in storage rings.The 1982 CERN School of Computing will be held from 29 August to 11 September in Zinal, Valais, Switzerland. This will be the seventh such school and will cover topics of current interest in computing which are relevant to data processing needs in high energy physics. This year marks the fiftieth anniversary of the discovery of the neutron by Sir James Chadwick. To commemorate the event, the UK Institute of Physics, in collaboration with the UK Atomic Energy Research Establishment at Harwell, is organizing an international conference at Cambridge from 13-17 September. The layout of the proposed Stanford Linear Collider SLC has been changed for environmental reasons. A workshop on physics with low energy cooled antiprotons at the new LEAR ring, currently under construction at CERN, will be held at Erice, Sicily, from 9-16 May. To stimulate interest in the problems of particle acceleration to the multi-TeV range, ECFA is organizing a meeting to review the limitations and prospects of both conventional and novel particle acceleration techniques. The 1982 CERN School of Physics will take place in Cambridge, UK, from 5-18 September

  11. A vintage celebration for CERN

    CERN Multimedia

    2004-01-01

    Maurice Dupraz, a winegrower from the Etat de Genève vineyards, explains the characteristics of the Vigne des Nations to Robert Aymar, CERN's Director-General, and Robert Cramer, Conseiller d'Etat. As part of the fiftieth anniversary celebrations, CERN was the guest of honour at the Vigne des Nations ceremony organised by the Etat de Genève on 7 May. My Organization is greatly honoured to have the Vigne des Nations dedicated to it, said Robert Aymar, CERN's Director-General, at the ceremony held on the slopes of the Lully vineyards at Bernex on 7 May. Invited by Robert Cramer, President of Geneva's Conseil d'Etat, he spoke of the special links that have been forged over the last fifty years between CERN and the Canton of Geneva, where the Organization has its headquarters. Both of them paid tribute to Maurice Bourquin, former rector of the University of Geneva and Swiss delegate to the CERN Council since 1994, who became the first Swiss President of the CERN Council in 2000. The Vigne des Nations ceremony,...

  12. Medals for CERN spin-offs

    CERN Multimedia

    2007-01-01

    Nine companies whose inventions make use of technologies developed at CERN were honoured at the 35th Salon des Inventions, held in Geneva from 18-22 April. CERN was the Salon's guest of honour. The CERN 'table' at the 35th Salon des Inventions. This year's Salon included 1000 exhibitions brought by 775 exhibitors from 45 countries. Those with misgivings about the value of particle physics should take a look at the list of prize winners from the 35th Salon des Inventions, held in Geneva from 18-22 April. Nine of the winning inventions were spin-offs from technologies developed at CERN. CERN's research and development strategy includes a programme where technologies developed at and for the Laboratory are jointly developed with industries, so that they may be adapted into a commercial product for other uses. These include many different domains of applications such as medical imaging and IT. The following companies won awards at the Salon for inventions from CERN-developed technologies: PANalytical won a g...

  13. CERN safety reaches out to medicine

    CERN Document Server

    2001-01-01

    What do CERN and other scientific organizations like ESA and ESO have in common with neurosurgery and airlines? At first sight, not much. But all require sound safety management. CERN's expertise in this field was recently highlighted when two CERN engineers were invited to talk at an international conference on Quality Management and Risk Control in Neurosurgery.CERN has long been recognised as a centre of excellence in physics, and its spin-offs in fields such as medicine have been widely hailed. But increasingly, the Laboratory's expertise in the management of large international collaborations is also being recognised. Contacts between CERN and organizations like ESA and ESO, as well as with industry, bear witness to this fact. One recent example comes from Airbus Industrie, which organized a meeting in 1998 with CERN to compare notes on project management, safety, and quality assurance. Safety management is a recognised speciality in the field of project management and at CERN, TIS and the safety offici...

  14. Iranian and Kazakh representatives visit CERN

    CERN Multimedia

    2004-01-01

    On 1st and 4th March respectively, CERN received visits from Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, and Reza Mansouri, Deputy Minister for Science, Research and Technology of the Islamic Republic of Iran. Asset Issekeshev and his delegation came to CERN with the aim of learning "the European way of building strong and effective ties between science and the industrial sector". Welcomed by Maximilian Metzger, CERN's Secretary-General, he visited the ATLAS assembly hall and the CLIC installations before signing the visitors' book. After a short visit to Point 5 (CMS), Reza Mansouri met CERN's Director-General, Robert Aymar, before talking to Iranian PhD students working on their theses at CERN. Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, signs the visitors' book, watched by Maximilian Metzger, CERN's Secretary-General.From left to right: Mojtaba Mohammadi and Majid Hashemi (Iranian PhD students at CERN); Dr Daniel Denegri (CMS), Professor Re...

  15. Member State Event: Telling CERN's Story

    CERN Multimedia

    2004-01-01

    As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right of the photograph), co-inventor of the Web and currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February. This was not their first appearance before a non-specialist audience (almost 1000 people that day!) eager to find out what goes on in a unique research centre like CERN as talking about the Laboratory's activities and its history are part and parcel of their work for the Organization. Anniversary Events in the Member States: This 'Science Thursday' event devoted to CERN was one of Italy's contributions to CERN's fiftieth anniversary celebrations. Coming up soon in the Member States: Italy International Centre...

  16. - NEW - CERN Housing Service – WWW BOOKING

    CERN Multimedia

    GS Department

    2010-01-01

    You can now easily reserve your room at the CERN Hotel and plan your stay at CERN directly online with help of the online CERN Hotel reservation NOW available at the following address: https://edh.cern.ch/Hostel/ Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

  17. CERN Library | Herwig Schopper and Luigi Di Lella present "60 Years of CERN Experiments and Discoveries" | 10 March

    CERN Document Server

    CERN Library

    2016-01-01

    "60 Years of CERN Experiments and Discoveries" edited by Herwig Schopper and Luigi Di Lella. Presentation on Thursday, 10 March at 4 p.m. in Room C The book is a compilation of the most important experimental results achieved during the past 60 years at CERN - from the mid-1950s to the recent discovery of the Higgs particle. It covers the results from the early accelerators at CERN to those at the LHC and provides an excellent review of CERN's achievements. Not only presented is the impressive scientific progress achieved during the past six decades presented, but also is demonstrated the special way in which successful international collaboration exists at CERN. The book has been reviewed in the January-February issue of the CERN Courier: see here. Thanks to an agreement between CERN and the publisher, the e-book is available online Open Access. 60 Years of CERN Experiments and Discoveries Edited by Herwig Schopper and Luigi Di Lella W...

  18. CERN strives to stay ahead

    International Nuclear Information System (INIS)

    Sutton, Christine.

    1987-01-01

    The paper examines the future of CERN, with respect to its proposed research programme and its need to save money. Proposals concerning what accelerators CERN should build for the future are outlined; machines such as the Large Hadron Collider and the CERN Linear Collider have been proposed. Experimental expectations for the first Large Electron Positron (LEP) collider (now close to completion) are briefly described, along with the experimental investigations for the second phase of operation of LEP where modifications will increase the machine's energy. Criticisms of CERN's management by its governing body are also discussed. (UK)

  19. CERN – better than science fiction!

    CERN Multimedia

    2007-01-01

    From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN Audiovisual Service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN’s Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer). The two-time Academy Award-winning American film director, Ron Howard, recently visited CERN for background research in preparation for his new film Angels and Demons, based on the book by Dan Brown. He also filmed the adaption of Brown’s bestselling novel The Da Vinci Code last year.

  20. Psychometric properties of the OARSI/OMERACT osteoarthritis pain and functional impairment scales: ICOAP, KOOS-PS and HOOS-PS.

    Science.gov (United States)

    Ruyssen-Witrand, A; Fernandez-Lopez, C J; Gossec, L; Anract, P; Courpied, J P; Dougados, M

    2011-01-01

    To evaluate the psychometric properties of the OARSI-OMERACT questionnaires in comparison to the existing validated scales. Consecutive hip or knee osteoarthritis patients consulting in an orthopedic department were enrolled in the study. Data collected were pain using the Intermittent and Constant Osteoarthritis Pain (ICOAP), a Numeric Rating Scale (NRS), the Western Ontario McMaster Universities' Osteoarthritis Index (WOMAC) pain subscale, the Lequesne pain subscale; functional impairment using the Knee disability and Osteoarthritis Outcome Score-Physical Function Shortform (KOOS-PS), the Hip disability and Osteoarthritis Outcome Score-Physical Function Shortform (HOOS-PS), a NRS, the WOMAC function sub-scale, the Lequesne function subscale. Validity was assessed by calculating the Spearman's correlation coefficient between all the scales. Reliability was assessed in out-patients with stable disease comparing the data collected within 2 weeks using the intra-class correlation coefficient (ICC). Responsiveness was assessed on the data from hospitalised patients prior to and 12 weeks after a total joint replacement (TJR) using the standardised response mean. Three hundred patients (mean age=68 years, females=62%, hip OA=57%) were included. There was a moderate to good correlation between ICOAP, KOOS-PS, HOOS-PS and the WOMAC, NRS and Lequesne scales. Reliability of the ICOAP hip OA HOOS-PS and KOOS-PS was good (ICC range 0.80-0.81) whereas it was moderate for knee ICOAP (ICC=0.65). Responsiveness of the ICOAP, KOOS-PS and HOOS-PS 12 weeks after TJR was comparable to responsiveness of other scales (SRM range: 0.54-1.82). The psychometric properties of the ICOAP, KOOS-PS and HOOS-PS were comparable to those of the WOMAC, Lequesne and NRS.

  1. Expectation values of the e+PsH system

    International Nuclear Information System (INIS)

    Zhang, J.-Y.; Mitroy, J.

    2007-01-01

    Close to converged energies and expectation values for e + PsH are computed using a ground-state wave function consisting of 1500 explicitly correlated Gaussians. The best estimate of the e + PsH ∞ energy was -0.810 254 hartrees, which has a binding energy of 0.021 057 hartrees against dissociation into e + +PsH. The 2γ annihilation rate was 2.7508x10 9 s -1 . Binding energies and annihilation rates are also given for the different finite-mass variants of e + PsH. Comparisons between expectation values for e + PsH and PsH provide compelling evidence that the e + PsH ground state can be regarded as consisting of a weakly bound positron orbiting the PsH ground state

  2. Multichannel FPGA based MVT system for high precision time (20 ps RMS) and charge measurement

    Science.gov (United States)

    Pałka, M.; Strzempek, P.; Korcyl, G.; Bednarski, T.; Niedźwiecki, Sz.; Białas, P.; Czerwiński, E.; Dulski, K.; Gajos, A.; Głowacz, B.; Gorgol, M.; Jasińska, B.; Kamińska, D.; Kajetanowicz, M.; Kowalski, P.; Kozik, T.; Krzemień, W.; Kubicz, E.; Mohhamed, M.; Raczyński, L.; Rudy, Z.; Rundel, O.; Salabura, P.; Sharma, N. G.; Silarski, M.; Smyrski, J.; Strzelecki, A.; Wieczorek, A.; Wiślicki, W.; Zieliński, M.; Zgardzińska, B.; Moskal, P.

    2017-08-01

    In this article it is presented an FPGA based Multi-Voltage Threshold (MVT) system which allows of sampling fast signals (1-2 ns rising and falling edge) in both voltage and time domain. It is possible to achieve a precision of time measurement of 20 ps RMS and reconstruct charge of signals, using a simple approach, with deviation from real value smaller than 10%. Utilization of the differential inputs of an FPGA chip as comparators together with an implementation of a TDC inside an FPGA allowed us to achieve a compact multi-channel system characterized by low power consumption and low production costs. This paper describes realization and functioning of the system comprising 192-channel TDC board and a four mezzanine cards which split incoming signals and discriminate them. The boards have been used to validate a newly developed Time-of-Flight Positron Emission Tomography system based on plastic scintillators. The achieved full system time resolution of σ(TOF) ≈ 68 ps is by factor of two better with respect to the current TOF-PET systems.

  3. Turn-key Applications for Accelerators with LabVIEW-RADE

    CERN Document Server

    Andreassen, O O; Charrondiere, C; Feniet, T; Kuczerowski, J; Nybo, M; Rijllart, A

    2011-01-01

    In the accelerator domain there is a need of integrating industrial devices and creating control and monitoring applications in an easy and yet structured way. The LabVIEW-RADE framework provides the method and tools to implement these requirements and also provides the essential integration of these applications into the CERN controls infrastructure. We present three examples of applications of different nature to show that the framework provides solutions at all three tiers of the control system, data access, process and supervision. The first example is a remotely controlled alignment system for the LHC collimators. The collimator alignment will need to be checked periodically. Due to limited access for personnel, the instruments are mounted on a small train. The system is composed of a PXI crate housing the instrument interfaces and a PLC for the motor control. We report on the design, development and commissioning of the system. The second application is the renovation of the PS beam spectrum analyzer wh...

  4. Replacing PS controls front end minicomputers by VME based 32-bit processors

    International Nuclear Information System (INIS)

    Gagnaire, A.; Metz Noblat, N. de; Serre, Ch.; Sicard, Cl.H.

    1992-01-01

    The PS controls have started the first phase of system rejuvenation, targeted towards the LEP Preinjector Controls. The main impact of this phase is in the architectural change, as both the front-end minicomputers and the CAMAC embedded microprocessors are replaced by microprocessor based VME crates called Device Stub Controllers (DSC). This paper discusses the different steps planned for this first phase, i.e: (1) implementing the basic set of CERN Accelerator common facilities for DSCs (error handling, system surveillance, remote boot and network access); (2) porting the equipment access software layer; (3) applying the Real-time tasks to the LynxOS operating system and I/O architecture, conforming to the real-time constraints for control and acquisition; (4) defining the number and contents of the different DSC needed, according to geographical and cpu-load constraints; (5) providing the general services outside the DSC crates (file servers, data-base services); (6) emulating the current Console programs onto the new workstations. (author)

  5. Collide@CERN - public lecture

    CERN Multimedia

    2012-01-01

    CERN, the Republic and Canton of Geneva and the City of Geneva are delighted to invite you to a public lecture by Gilles Jobin, first winner of the Collide@CERN Geneva Dance and Performance Artist-in-residence Prize, and his CERN inspiration partner, Joao Pequenao. They will present their work in dance and science at the Globe of Science and Innovation on Wednesday, 23 May 2012 at 7 p.m. (doors open at 6.30 p.m.).   
                                                  Programme 19:00 Opening address by - Professor Rolf-Dieter Heuer, CERN Director-General, - Ariane Koek...

  6. CERN

    CERN Multimedia

    2007-01-01

    "Geat ready for the mother of all particle accelerator: the Large Hadron Collider (LHC), nearing completion at CERN, the International particle physics lab headquartered in Geneva, Switzerland." (1 paragraph)

  7. CERN Housing Service – New website

    CERN Multimedia

    GS Department

    2009-01-01

    You can now consult the new CERN Housing Service website which includes information relating to the CERN hostels booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

  8. CERN Housing Service – New website

    CERN Multimedia

    GS Department

    2009-01-01

    You can now consult the new CERN Housing Service website which includes information relating to the CERN hostel booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

  9. CERN Relay Race

    CERN Document Server

    2005-01-01

    The CERN Relay Race will take place around the Meyrin site on Wednesday 18 May between 12.15 and 12.35. This year, weather permitting, there will be some new attractions in the start/finish area on the field behind the Main Building. You will be able to: listen to music played by the CERN Jazz Club; buy drinks at the bar organised by the CERN Running Club; buy lunch served directly on the terrace by the restaurant Novae. ATTENTION: concerning traffic, the recommendations are the same as always: If possible, please avoid driving on the site during this 20 minute period. If you do meet runners in your car, please STOP until they all have passed. Thank you for your understanding.

  10. How to use Skype for Business on Windows at CERN

    CERN Multimedia

    CERN. Geneva; Manzoni, Alex Marc

    2017-01-01

    Skype for Business, formerly known as Lync, is a softphone technology, which is, in turn, a feature/component of IP telephony.This short tutorial explains how to use it on the Windows platform at CERN. Timestamps: 3:08 - How to call a regular phone number 3:59 - How to call a Skype for Business user at CERN  5:16 - How to create a Skype for Business meeting in Outlook    Existing MS material: A Making phone calls tutorial A “Skype for Business” introduction (doesn’t cover the part related to “Call forwarding”)    

  11. Upcoming opening of CERN's new Mobility Centre

    CERN Multimedia

    2016-01-01

    On 29 February, CERN’s brand new Mobility Centre opened in the Globe car park. The Centre has been created to cater to the transport needs of everyone at CERN, to simplify procedures and to centralise all the transport services on offer: the rental of CERN bikes and cars, the CERN car-sharing scheme and SIXT car rental.   From 29 February onwards, the Mobility Centre in the Globe car park will be the place to go for all your duty travel needs: rental of CERN cars (with or without the CERN logo), SIXT car rental, CERN bike rental, distribution of cards allowing the use of CERN’s self-service bike- and car-sharing schemes. That same day, the premises currently housing the Car Pool in Building 130 will become the CERN garage, responsible for: upkeep and repairs on CERN bikes, minor maintenance work on CERN vehicles (e.g. replacing windscreen wipers, bulbs and fuses, refilling windscreen washer fluid, pumping up tyres, etc.), arranging and following up the repair and maintenan...

  12. Wall-Current-Monitor based Ghost and Satellite Bunch Detection in the CERN PS and the LHC Accelerators

    CERN Document Server

    Steinhagen, R J; Belleman, J; Bohl, T; Damerau, H

    2012-01-01

    While most LHC detectors and instrumentation systems are optimised for a nominal bunch spacing of 25 ns, the LHC RF cavities themselves operate at the 10th harmonic of the maximum bunch frequency. Due to the beam production scheme and transfers in the injector chain, part of the nominally ‘empty’ RF buckets may contain particles, referred to as ghost or satellite bunches. These populations must be accurately quantified for high-precision experiments, luminosity calibration and control of parasitic particle encounters at the four LHC interaction points. This contribution summarises the wall-current-monitor based ghost and satellite bunch measurements in CERN’s PS and LHC accelerators. Instrumentation set-up, post-processing and achieved performance are discussed.

  13. CERN and the LHC

    CERN Multimedia

    Cramer, J G

    1992-01-01

    CERN, a high-energy physics laboratory in Europe, is planning to build a more powerful particle accelerator, the Large Hadronic Collider. The US spreads its accelerators around the country while most of Europe's research is conducted at and around CERN.

  14. Helping CERN give back to society

    CERN Multimedia

    2014-01-01

    The CERN & Society mission: ‘To spread the CERN spirit of scientific curiosity for the inspiration and benefit of society.’   Digital library schools in Africa, Arts@CERN, a beam line for schools competition and perhaps soon a dedicated biomedical research facility: CERN infrastructure and expertise have a great influence on society, and we have the potential to do much more. For that, however, we need help, and that’s why we have launched the CERN & Society initiative, which this week sees the publication of a new website for those who want to understand more about how our research touches everyday life, as well as for those who wish to help CERN in this new endeavour. Fundamental research fulfils a very human need. The quest to understand the universe we live in is as old as humanity itself, and CERN is in the vanguard of that effort today. For our scientists and engineers, pushing technology to the limit is part of their day job, and in doing so they ...

  15. Developers@CERN Forum | Python at CERN | 30 – 31 May

    CERN Multimedia

    2016-01-01

    The Developers@CERN Forum is an event by developers for developers aimed at promoting knowledge- and experience-sharing (see here). The second forum will take place in the IT auditorium in the afternoons of 30 and 31 May.   With the topic “Python at CERN”, it will consist of a series of talks regarding the Python language, frameworks and tools used at CERN. Are you a Python guru or would you like to learn? Come and share your Python experiences with other developers! Submissions for presentations and workshops are open until 9 May at http://cern.ch/dev-forum. If you would like to stay informed about this or future events, please subscribe to the announcement e-group (just a few e-mails per year) here. 

  16. Messages of congratulation received by the CERN Management and the Communication Group

    CERN Multimedia

    CERN Bulletin

    Below we have reproduced a selection of messages from various laboratories and personalities congratulating CERN on its recent achievements.   Hats off in the CCC for the first beams in the LHC (Friday 20 November 2009) Je suis heureux d'adresser à l'équipe qui vient de mettre en marche le LHC les félicitations du dernier survivant des fondateurs du CERN. François de Rose   The CCC during the first moments of operation of the LHC Dear Rolf, from all your friends and colleagues at Fermilab: our heartiest congratulations on the first collisions at LHC!! We are delighted with the rapid progress.  Pier Oddone, FERMILAB Director.   As many thousand people all around the world, I have been following the LHC being turned back on! It is really great to see the machine coming on so smoothly up to now. I keep my fingers crossed and wish you all the best. Please send my congratulations to all the people involve...

  17. Collide@CERN ProHelvetia Public Lecture

    CERN Multimedia

    CERN. Geneva; Heuer, Rolf; Mr. de Diesbach, Simon; Mr. Dubois, Marc; Ms. Perrenoud, Laura; Mr. Vust, Michel; Mrs. Bello, Monica

    2015-01-01

    You are very warmly invited to the opening presentation of Fragment.In’s residency at CERN. Fragment.In are the winners of Collide@CERN ProHelvetia, a collective formed by Laura Perrenoud, Simon de Diesbach, and Marc Dubois. They will present their artistic work along with their CERN scientific inspiration partner, who will present his/her work on Science. In their proposal, Fragment.In has a unique, original and creative approach to data visualization. We look forward to having them at CERN. Collide@CERN is the three month residency programme providing artists with time and space to reflect, research and renew their artistic practice.

  18. CERN CAR CLUB

    CERN Multimedia

    Automobile club

    2009-01-01

    You are cordially invited to the next General Assembly of the CERN Car Club Tuesday 12 January 2010 at 5:45pm Bldg. 593 / room 11 As the end of 2009 is approaching, it is time to think about renewing your subscription. Therefore next time you are on the CERN-Meyrin site or at the Post Office counter don’t forget to fill in the payment slip to continue to be a part of our large family. The fee remains unchanged: 50 CHF. For those of you who are regular users of our equipment and who know of all the advantages that the club is in a position to offer, it seems pointless to give details, we are sure that many of you have made use of them and are satisfied. We remind you everyone working on CERN site is entitled to become a member of our club, this includes industrial support personnel and staff of companies which have a contract with CERN. If you are not yet a member, come and visit us! We will be happy to welcome you and show you the facilities, or you can visit our web site. The use of the club&...

  19. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    2010-01-01

    Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

  20. News from the CERN Printshop

    CERN Multimedia

    IT Department

    2010-01-01

    Please note there are a limited number of the 2011 CERN wall calendars now available from the Printshop, located in Building 510-R-007. These have been printed on card in A3 and A4. If you need more than a few copies, there are two solutions: download the file and print your own on paper; send us an e-mail to place an order. Please visit the new Printshop website for more information: http://cern.ch/printshop. Printshop reception opening hours: 10h00-12h00 and 13h00-15h00. Many thanks. CERN Printshop Tel: 72426 E-mail: Printshop@cern.ch

  1. Sequence control of phase separation and dewetting in PS/PVME blend thin films by changing molecular weight of PS.

    Science.gov (United States)

    Xia, Tian; Qin, Yaping; Huang, Yajiang; Huang, Ting; Xu, Jianhui; Li, Youbing

    2016-11-28

    The morphology evolution mechanism of polystyrene (PS)/poly (vinyl methyl ether) (PVME) blend thin films with different PS molecular weights (M w ) was studied. It was found that the morphology evolution was closely related to the molecular weight asymmetry between PS and PVME. In the film where M w (PS) ≈ M w (PVME), dewetting happened at the interface between the bottom layer and substrate after SD phase separation. While in the film where M w (PS) > M w (PVME), dewetting happened at the interface between the middle PS/PVME blend layer and bottom PVME layer near the substrate prior to phase separation. The different sequences of phase separation and dewetting and different interface for dewetting occurrence were studied by regarding the competitive effects of viscoelasticity contrast between polymer components and preferential wetting between PVME and the substrate. The viscoelastic nature of the PS component played a crucial role in the sequence of phase separation and dewetting.

  2. Scientific Information Service at CERN

    CERN Document Server

    Pereira, Margarida

    2016-01-01

    Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

  3. UK Mission to CERN

    CERN Multimedia

    2004-01-01

    At the end of June, nine experts from UK industry visited CERN to study techniques for developing distributed computing systems and to look at some specific applications. In a packed three-day programme, almost 40 CERN experts presented a comprehensive survey of achievements.

  4. Cern-Grid besteht Belastungsprobe

    CERN Multimedia

    2005-01-01

    In the European Center for Nuclear Research, CERN, in Geneva the Grid Computing infrastructure's building took a further hurdle: between CERN and seven Research Centers around the World, during 10 days, a continuous flow of about 600 MByte was achieved (¼ page)

  5. CERN welcomes new members

    Science.gov (United States)

    2017-08-01

    Lithuania is on course to become an associate member of CERN, pending final approval by the Lithuanian parliament. Associate membership will allow representatives of the Baltic nation to take part in meetings of the CERN Council, which oversees the Geneva-based physics lab.

  6. CERN openlab Open Day

    CERN Multimedia

    Purcell, Andrew Robert

    2015-01-01

    The CERN openlab Open Day took place on 10 June, 2015. This was the first in a series of annual events at which research and industrial teams from CERN openlab can present their projects, share achievements, and collect feedback from their user communities.

  7. CERN's 25th Anniversary

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    A ceremony in the Main Auditorium on 23 June 1979 to mark the 25th Anniversary of CERN. A photo of the five Director-Generals of CERN, from left to right: John Adams, Willi Jentschke, Felix Bloch, Viki Weisskopf and Leon van Hove.

  8. Developers@CERN Forums: Python

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The Developers@CERN Forums second edition took place at the end of May on the topic of Python. How do developers at CERN interact with Python? Which cutting-edge projects are using Python? What were the highlights of this most recent forum?

  9. CERN at ESOF 2016

    CERN Multimedia

    James Gillies

    2016-01-01

    CERN had a major presence at the ESOF2016 conference this week, largely in collaboration with our EIROforum partners. A keynote session featuring the CERN Director-General, Fabiola Gianotti, EMBL Director-General, Iain Mattaj, and ESO Director for Science, Rob Ivison, and chaired by BBC science correspondent Pallab Ghosh debated the value of European collaboration in science.   The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. (Image: Matt Wilkinson Photography/ ESOF 2016) A double session covered the science of the EIROs, with ATLAS physicist Claire Lee representing CERN, and there was a session exploring the ways that the EIROforum organisations create business value locally, with the leader of the Knowledge Transfer group, Giovanni Anelli, representing CERN. The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. Side events linked to the stand discussed subjects su...

  10. Industrial Activity at CERN

    CERN Document Server

    Kowalik, G

    2000-01-01

    The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

  11. CERN car sharing scheme now open to everyone

    CERN Multimedia

    GS Department

    2011-01-01

    The CERN car sharing service is a self-service scheme providing a pool of 30 CERN cars available for pick-up free of charge from 13 points around the Meyrin and Prévessin sites. From Thursday, 1st December 2011, the service will be open to all members of the CERN personnel and contractors' personnel, in the framework of their professional activities at CERN only. The conditions of use can be consulted at: http://gs-dep.web.cern.ch/en/content/Mobility/Car_sharing To be able to use the service, members of the CERN personnel and contractors' personnel must: have a contractual link to CERN, possess an e-mail address registered in the CERN databases; hold an RFID access card, which can be obtained from the CERN Car Pool on presentation of a valid CERN access card. Car Pool, Building 130-R-012, open Monday-Friday, 8.00 a.m.-12.00 noon/1.00 p.m.-5.00 p.m. https://gs-dep.web.cern.ch/en/content/car-pool GS-IS

  12. CERN Shop - Christmas Sale in Bldg. 33

    CERN Multimedia

    PH Department

    Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

  13. Member State Event: Telling CERN's story !

    CERN Multimedia

    2004-01-01

    As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right), currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February.

  14. 10,000th teacher visits CERN

    CERN Multimedia

    Kathryn Coldham

    2016-01-01

    This year, the 10,000th teacher will visit CERN since its first teacher programme in 1998.   HST 2016 teachers with CERN Director-General Fabiola Gianotti in the CERN Council Chamber. (Image: Maximilien Brice/CERN) This summer, CERN welcomed the 10,000th teacher to participate in one of its teacher programmes! This milestone was achieved in this year’s International High School Teacher (HST) programme, a three-week residential programme that saw 48 enthusiastic teachers flock from all over the world to help inspire young minds. Taking place every July since 1998, the HST programme aims to increase teachers’ knowledge on the cutting-edge particle physics research currently being carried out at CERN. It also opens up a whole new world of educational resources available for use by the teachers to inspire their students’ curious young minds. More information is available here.

  15. CERN and Pakistan consolidate their partnership

    CERN Multimedia

    2006-01-01

    During the President of Pakistan's visit to CERN, the Laboratory and Pakistan decided to strengthen their collaboration. The President of Pakistan, Pervez Musharraf, the Chairman of PAEC, Parvez Butt, and CERN's Director-General, Robert Aymar, exchange congratulations following the signing of the letter of intent to strengthen partnership between CERN and Pakistan.The President of the Islamic Republic of Pakistan, Pervez Musharraf, during his speech in the Council Chamber. The President of the Islamic Republic of Pakistan, General Pervez Musharraf, visited CERN on 27 January this year, accompanied by an important delegation of five ministers from the Pakistani Government, the Chairman of Pakistan's Atomic Energy Commission (PAEC), Parvez Butt, and an eminent former Chairman of the Commission, Ishfaq Ahmad, who pioneered cooperation with CERN. Welcomed by CERN's Director-General, Robert Aymar, the President visited the CMS experiment to which Pakistan is making a substantial contribution. The presidential pa...

  16. CERN UN Roundtable

    CERN Multimedia

    CERN. Geneva; Del Rosso, Antonella; Gillies, James

    2014-01-01

    In the spirit of strengthening links and sharing best practices among the two Organizations, UNOG and CERN will be jointly organizing a round table discussion on the issue of “The challenge of communicating science and technology to the world: issues and solutions”. It is hoped that the discussions can highlight the experience of various organizations and institutions in their efforts to communicate and inform in several languages on topics – science and technology – that are often perceived as distant and arduous by the layman. ==>> Please note that registrations are now closed. It is not necessary to register for this event if you plan to watch it live on http://webcast.cern.ch. Send your questions to the speakers by email to: question@cern.ch

  17. CERN servers donated to Ghana

    CERN Multimedia

    CERN Bulletin

    2012-01-01

    Cutting-edge research requires a constantly high performance of the computing equipment. At the CERN Computing Centre, computers typically need to be replaced after about four years of use. However, while servers may be withdrawn from cutting-edge use, they are still good for other uses elsewhere. This week, 220 servers and 30 routers were donated to the Kwame Nkrumah University of Science and Technology (KNUST) in Ghana.   “KNUST will provide a good home for these computers. The university has also developed a plan for using them to develop scientific collaboration with CERN,” said John Ellis, a professor at King’s College London and a visiting professor in CERN’s Theory Group.  John Ellis was heavily involved in building the relationship with Ghana, which started in 2006 when a Ghanaian participated in the CERN openlab student programme. Since 2007 CERN has hosted Ghanaians especially from KNUST in the framework of the CERN Summer Student Progr...

  18. Back to school at CERN

    CERN Multimedia

    2007-01-01

    The Education Group is expanding its courses for teachers: over 700 secondary school teachers will be going back to school at CERN this year. Thirty-seven teachers from various countries participated in the High School Teachers at CERN programme, with Rolf Landua, the head of the Education Group, Mick Storr, the Education Group’s programme coordinator and Robert Aymar, the CERN Director-General.From 3 to 8 July, CERN hosted the runners-up from the finals of the British Physics Olympiad, the prize for the winners being a trip to the International Physics Olympiad in Iran. The five students were invited to visit CERN to attend the summer student programme for three days. "This gives us an opportunity to study new subjects that are not necessarily part of the school curriculum. Even though I’ve heard about the various types of research, it is a real plus to be able to attend these lectures", explains Oliver Mac Farlane, a young stu...

  19. The first CERN Spring Campus

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

  20. CERN's role in medical applications

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    Last week, CERN hosted the first meeting of the International Strategy Committee for medical applications. This Committee will help CERN establish its roadmap in the field of research and development activities for medical applications. Here the CERN Bulletin speaks with the Chair of the Committee as he shares his expectations and his vision.   Dr Michael Baumann is the Director of the Radiation Oncology department at the Carl Gustav Carus University Hospital in Dresden and of the Institute for Radiooncology of the Helmholtz-Zentrum Dresden-Rossendorf (Germany). He has recently been appointed Chair of CERN’s International Strategy Committee for medical applications – the team of experts who will advise the CERN Medical Applications Study Group led by Steve Myers. “CERN has a tremendous record in physics and basic research,” says Baumann. “I think that it has a very important role in steering some of the R&D that cannot be done at universities ...

  1. Romania's flag raised at CERN

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    A ceremony was held for the raising of the Romanian flag alongside the flags of CERN’s 21 other Member States.   The Romanian flag is raised alongside the flags of CERN’s other Member States, in the presence of the Romanian President, CERN’s Director-General, the President of the CERN Council and a large Romanian delegation. (Image: Maximilien Brice/ Sophia Bennett/CERN) On Monday, 5 September, the Romanian flag was raised in front of CERN for the first time, marking the country’s accession to Membership of the Organization. The blue, yellow and red flag joined those of the other 21 Member States of CERN in a ceremony attended by the President of Romania, Klaus Iohannis, the Romanian Minister for Education and Scientific Research, Mircea Dumitru, and several other members of the President’s office, the government and academia in Romania. The country officially became a CERN Member State on 17 July 2016, after 25 years of collaboration between the...

  2. UN Secretary General visits CERN

    CERN Multimedia

    2008-01-01

    UN Secretary General praises CERN in recent visit. Ban Ki-moon, Robert Aymar, CERN Director-General, and Sergei Ordzhonikidze, Director-General of the United Nations Office in Geneva at the CMS site.On Sunday 31 August, Ban Ki-moon, the UN Secretary General, made an important visit to CERN. Arriving in the late afternoon, he was warmly greeted at Point 5 by Robert Aymar, the Director-General, and the Sous-préfet of Gex, Olivier Laurens-Bernard. Accompanied by a UN delegation, Ban Ki-moon was also introduced to Jos Engelen, the Chief Scientific Officer, and Jim Virdee, the CMS spokesperson. He then took the opportunity to visit CMS and the machine tunnel. At the end of his short trip, Ban Ki-moon signed the Guest Book in the tradition of important dignitaries visiting CERN. Expressing his admiration for CERN’s spirit of collaboration, Ban Ki-moon said, "I am very honored to visit CERN, an invaluable scientific institution a...

  3. 2nd Developers@CERN Forum

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    Are you a Python guru or would you like to learn?   The Developers@CERN Forum is an event by developers, for developers, aimed at promoting knowledge and experience sharing. This edition will take place at the IT Amphitheatre, on the 30th and 31st of May afternoons. It will consist of a series of short presentations and workshops. The topic for this conference will be Python at CERN: language, frameworks and tools. Have you got an idea for a presentation or workshop? Then, tell us about it (deadline on 9th of May). Registration will open in early May. Please subscribe to developers-forum-announce@cern.ch mailing list for further information. This event will be made by developers for developers. We are counting on your presence, but also on your contributions! To learn more about the initiative, read the CERN Bulletin article. Organization You can get in touch us at developers-forum-organizers@cern.ch.

  4. CERN openlab enters new phase

    CERN Multimedia

    Katarina Anthony

    2012-01-01

    The newest phase of CERN’s openlab framework was inaugurated this week during a meeting of the openlab partners. This phase will last three years and will bring together existing openlab partners and a new contributor: Huawei.   Group picture taken at the first CERN openlab IV annual Board of Sponsors meeting, in the presence of the CERN Director-General, the partners and the openlab team members. © Fons Rademakers (CERN Photo Club). Eleven years ago, the creation of the CERN openlab created a long-term link between industrial partners and the Organization. Its framework has allowed industry to carry out large-scale IT research and development in an open atmosphere – an “Open Lab”, if you will. For CERN, openlab has contributed to giving the computing centre and, more broadly, the LHC community, the opportunity to ensure that the next generation of services and products is suitable to their needs. Now entering its fourth phase, openlab will ...

  5. CERN and ESA: fundamentally contrasting organisations?

    International Nuclear Information System (INIS)

    Bowell, Valerie

    1988-01-01

    The paper concerns the European Organisation for Nuclear Research (CERN) and the European Space Agency (ESA), and questions whether the United Kingdom (U.K.) will continue as a full member of these two organisations. A description is given of the establishment of these institutions, their collaboration and their activities. The effect of the U.K.'s financial difficulties on both CERN and ESA programmes is discussed. Figures are given on the actual cost to the U.K. of CERN and ESA, and also the CERN and ESA subscriptions as a percentage of total spending on particle physics and astronomy, for the period 1980-8. The U.K. committment to the ESA and CERN programmes are both described. (U.K.)

  6. The 36th CERN School of Computing visits Cyprus: Apply now!

    CERN Multimedia

    François Fluckiger, CSC Director

    2013-01-01

    CERN is organising its Summer Computing School for the 36th time since 1970. CSC2013 will take place from 19 to 30 August in Nicosia, Republic of Cyprus, which was admitted last autumn as an Associate Member in the pre-stage to Membership of CERN.    The CSCs aim at creating a common technical culture in scientific computing among scientists and engineers involved in particle physics or in sister disciplines. The two-week programme consists of 50 hours of lectures and hands-on exercises. It covers three main themes: data technologies, base technologies and physics computing, and it particular addresses: Many-core performance optimization Concurrent programming Key aspects of multi-threading Writing code for tomorrow’s hardware, today Storage technologies, reliability and performance Cryptography, authentication authorization and accounting Data Replication, caching, monitoring, alarms and quota Writing secure software Observing  s...

  7. An Algerian Minister visits CERN

    CERN Multimedia

    2006-01-01

    The Algerian Minister of Higher Education and Scientific Research, Rachid Haraoubia, visited CERN on 14 November. His party included the Rector of the University of Blida and the Director of the Algerian Ecole Nationale Polytechnique. Welcomed by CERN's Director-General, Robert Aymar, and Secretary-General, Maximilien Metzger, he signed the VIP Visitors' Book before going on to visit the ATLAS experiment and the LHC tunnel. He then had the opportunity to meet Algerian scientists working at CERN. Some fifteen Algerian physicists attached to European and US institutes are participating in the LHC experiments, in particular ATLAS. A formal collaboration agreement between Algeria and CERN is expected to be drawn up in the near future.

  8. CERN Entrepreneur Mixer | 21 June | Pas perdus

    CERN Multimedia

    2016-01-01

      CERN Knowledge Transfer group is hosting an Entrepreneur Mixer, an event dedicated to building bridges between CERN innovative entrepreneurs. This will be a unique opportunity to discover business projects initiated by former CERN people, and to see how CERN technology is being exploited by start-up companies. The deadline for registration is Friday, 17 June. For more information, please visit the Indico page of the event: https://indico.cern.ch/event/537167/

  9. France at CERN, 11-14 March 1986. CERN Courier, May 1986, v. 26(4)

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1986-05-15

    More firms participated in the 1986 'France at CERN' Exhibition than in the previous exhibition in 1983. This year 55 firms, including three Chambers of Commerce and Industry, took part in the exhibition which comprised 34 stands. The choice of firms was approved by the official with responsibility for CERN at the Scientific and Technical Mission of the Ministry of Research and Technology, thereby ensuring that the exhibits corresponded to CERN's immediate needs and in particular to those of LEP.

  10. Electron Spin Resonance studies on PS, PP and PS/PP blends under gamma irradiation

    International Nuclear Information System (INIS)

    Reyes, J.; Claro, M.; Albano, C.; Venezuela Central University, Caracas; Moronta, D.

    2002-01-01

    Complete text of publication follows. Electron Spin Resonance (ESR) studies on Polystyrene (PS), Polypropylene (PP) and their mixtures at compositions of 80/20 with and without a compatibilizer (SBS in block), 7.5 wt.%, irradiated with gamma rays from a Cobalt-60 source with a dose rate of 4.8 KGy/h at integral doses of radiation of 10, 25, 50, 60, 70, 400, 800 and 1300 KGy in the presence of air and at room temperature (RT) are reported. The dependence of resonance line width, Hpp; resonance line shapes K, and radical concentration, S, with the integral dose of irradiation is investigated. The nature of the free radicals after ten days of air storage is discussed. The free radical concentration, the double integral of the resonance line, S, has been estimated at room temperature, RT, for a group of single lines, characterized by the same giromagnetic, g, value by direct numerical double integration. In the samples studied no spectrum of 0 kGy of integral dose was observed. The concentration of radicals, S, observed when the integral radiation doses was increased, presents a maximum value in the PP samples at high doses (70-1300 kGy) and minimum values in the PS samples with the same doses. This shows that the PP degrades at a faster rate than the PS, owing to the presence of the bencenic ring in the latter. In the PS/PP mixtures studied with and without compatibilizer, the values of the radical concentration is found between the observed values in the homopolymers, being closer to the PS, which might imply that the presence of PS decays the degradation process of the PP in the mixture

  11. Cs0.49NbPS6

    Directory of Open Access Journals (Sweden)

    Hoseop Yun

    2011-01-01

    Full Text Available The quaternary thiophosphate, Cs0.49NbPS6, caesium hexathioniobiophosphate(V, has been synthesized by the reactive halide flux method. The title compound is isotypic with Rb0.46TaPS6 and is made up of a bicapped trigonal–biprismatic [Nb2S12] unit and a tetrahedral [PS4] group. The [Nb2S12] units linked by the [PS4] tetrahedra form infinite chains, yielding a three-dimensional network with rather large van der Waals gaps along the c axis in which the disordered Cs+ ions reside. The electrons released by the Cs atoms are transferred to the pairwise niobium metal site and there are substantial intermetallic Nb—Nb bonding interactions. This leads to a significant decrease of the intermetallic distance in the title compound compared to that in TaPS6. The classical charge balance of the title compound may be represented as [Cs+]0.49[Nb4.51+][P5+][S2−]4[S22−].

  12. CERN in the blogosphere

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    CERN communicates with the outside world in many different ways – websites, publications, through the media and via twitter to name but a few. As of January, CERN has a new way of engaging with the world: a CERN institutional blog.   CERN’s blog was launched on 10 January on the Quantum Diaries platform, adding a new strand to a well-established site. Quantum Diaries was launched in 2005 as an initiative for the World Year of Physics promoted by the InterAction collaboration, a group that brings together the communication offices of some of the world’s major particle physics labs and organisations. The launch of institutional blogs from Brookhaven, CERN, Fermilab and TRIUMF has added an extra dimension to Quantum Diaries. Visits to the site jumped to 3000 per day with the addition of the institutional blogs, and that number is already growing. CERN’s first post explains one of the reasons we’re doing this. With the incredible thirst for informati...

  13. CERN apprenticeship scheme honoured

    CERN Document Server

    2008-01-01

    Prestigious awards for two apprentices who did their practical training at CERN. Sylvain Heinzen, apprentice physics lab technician at CERN, receiving his award from Pierre-François UNGER, State Councillor responsible for the Federal Department of the Economy and Health. The other award-winner, Cédric Gerber, is on the right of the photo.Among Geneva’s top apprentices who were honoured by the Fondation sociale de l’Union industrielle genevoise (UIG) on 28 October this year, were two CERN apprentices. Electronics technician Cédric Gerber and physics lab technician Sylvain Heinzen both did their four-year sandwich course at CERN, obtaining their professional qualification, the Certificat fédéral de capacité (CFC), in June. On top of that, Cédric Gerber, who had been a particularly outstanding apprentice, received two further distinctions at the CFC awards ceremony - the State Council prize for achieving one of the top-ten o...

  14. Indian President visits CERN

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    On 1 October, her Excellency Mrs Pratibha Devisingh Patil, President of India, picked CERN as the first stop on her official state visit to Switzerland. Accompanied by a host of Indian journalists, a security team, and a group of presidential delegates, the president left quite an impression when she visited CERN’s Point 2!   Upon arrival, Pratibha Patil was greeted by CERN Director General Rolf Heuer, as well as senior Indian scientists working at CERN, and various department directors. After a quick overview of the Organization, Rolf Heuer and the President addressed India’s future collaboration with CERN. India is currently an Observer State of the Organization, and is considering becoming an Associate Member State. A short stop in LHC operations gave Steve Myers and the Accelerator team the opportunity to take the President on a tour through the LHC tunnel. From there, ALICE’s Tapan Nayak and Spokesperson Paolo Giubellino took Pratibha Patil to the experiment&am...

  15. CERN SHOP CHRISTMAS SALE

    CERN Multimedia

    Visits & Exhibition Service

    2000-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

  16. CERN and space science

    CERN Multimedia

    2009-01-01

    The connection between CERN and space is tangible this week, as former CERN Fellow and ESA astronaut Christer Fuglesang begins the second week of his mission on space shuttle flight STS-128. I had the pleasure to meet Christer back in October 2008 at an IEEE symposium in Dresden, and he asked me whether we could give him something related to CERN for his official flight kit. We thought of caps and tee-shirts, but in the end decided to give him a neutralino as a symbol of the link between particle physics and the science of the Universe. Neutralinos are theoretical particles that the LHC will be looking for, and if they exist, they’re strong candidates for the Universe’s dark matter. Christer’s neutralino is just a model, of course, escaped from the particle zoo, but what better symbol of the connectedness of science? Christer Fuglesang is not the only link CERN has with the space shuttle programme. We’ve recently learned that...

  17. Star spotting at CERN

    CERN Multimedia

    2008-01-01

    This June, two American celebrities (and physics enthusiasts!) came to CERN. Brian Cox gave Mike Einziger (right), lead guitarist with the rock band Incubus, the star treatment in the ATLAS cavern. Jesse Dylan embraces the spirit of ATLAS! Mike Einziger, lead guitarist with the rock band Incubus, visited CERN on Friday 13 June between concerts in Finland and England. Einziger, a lifelong science enthusiast descended into the ATLAS and CMS caverns and visited the SM18 test magnet facility during his brief tour of CERN. Einziger learned about the LHC through watching online lectures from University of Manchester and ATLAS physicist Brian Cox, and was thrilled to have the chance to see the detectors in person. The musician has created an orchestral piece, inspired in part by the work being done at CERN for the LHC, which will have its debut in Los Angeles on 23 August. Just over a week earlier, Jesse Dylan, Hollywood film director a...

  18. CERN anti-fraud policy

    CERN Multimedia

    2013-01-01

    In 2011, a working group on improved fraud prevention and management was established. The group was composed of the Director of Administration and General Infrastructure, the Head of the Human Resources Department, and the Heads of the Legal Service and Internal Audit. It recommended the adoption of a global fraud prevention and management policy.   The global fraud prevention and management policy was implemented through the CERN Anti-Fraud Policy, which was endorsed by the Enlarged Directorate in May 2012 and approved by the Director-General for entry into force on 1 January 2013. The CERN Anti-Fraud Policy defines the Organization’s policy in matters of fraud.  CERN has a zero tolerance approach towards fraud, as it would compromise the accomplishment of its objectives and undermine its functioning, credibility and reputation. The policy also states CERN’s commitment to the prevention, identification and investigation of fraud. All CERN contributors have a key rol...

  19. A new director for Arts@CERN

    CERN Multimedia

    CERN Bulletin

    2015-01-01

    On 2 March 2015, Mónica Bello will take the reins of the Arts@CERN programme. A few days before taking over the new job, the curator and art critic talked to the CERN Bulletin about her interest in arts and science, her motivations for the job, and her plans for the future of the programme.   Mónica Bello. “The exciting nature of CERN almost demands an artistic programme like Arts@CERN,” says Mónica, former artistic director of VIDA (one of the most important competitions in digital and new media arts worldwide), who has recently been appointed as the new director of the Arts@CERN programme. “The programme is unique as it provides the artist not only with resources, but also with interesting scientific topics and a natural way for the artists to become involved. Thanks to this programme, artists can come to CERN, bring their individuality, and really benefit from the sharing experience with scientists.” Mónica,...

  20. CERN@school shoots for the stars

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    CERN technology will be taking a stellar journey as the Langton Ultimate Cosmic ray Intensity Detector (LUCID) is launched into space in 2012. LUCID has been designed by students from the CERN@school programme using Timepix chips from the Medipix Collaboration at CERN.   CERN@school students present LUCID.  In today’s educational environment, a pioneering school physics programme that involves students in authentic research seems unlikely. But in the UK, the CERN@school programme is providing the resources for school students to do just that. “We develop projects which allow students to work alongside scientists and engineers before they go to university,” says Becky Parker, head of the Langton Star Centre and founder of the CERN@school programme. “Thanks to these programmes, students can make a genuine contribution to global scientific research. LUCID is the culmination of three years of efforts by the students.” Surrey Satellite Tech...