User and group storage management the CMS CERN T2 centre

Science.gov (United States)

Cerminara, G.; Franzoni, G.; Pfeiffer, A.

2015-12-01

A wide range of detector commissioning, calibration and data analysis tasks is carried out by CMS using dedicated storage resources available at the CMS CERN Tier-2 centre. Relying on the functionalities of the EOS disk-only storage technology, the optimal exploitation of the CMS user/group resources has required the introduction of policies for data access management, data protection, cleanup campaigns based on access pattern, and long term tape archival. The resource management has been organised around the definition of working groups and the delegation to an identified responsible of each group composition. In this paper we illustrate the user/group storage management, and the development and operational experience at the CMS CERN Tier-2 centre in the 2012-2015 period.

User and group storage management the CMS CERN T2 centre

CERN Document Server

Cerminara, G; Pfeiffer, A

2015-01-01

A wide range of detector commissioning, calibration and data analysis tasks is carried out by CMS using dedicated storage resources available at the CMS CERN Tier-2 centre. Relying on the functionalities of the EOS disk-only storage technology, the optimal exploitation of the CMS user/group resources has required the introduction of policies for data access management, data protection, cleanup campaigns based on access pattern, and long term tape archival. The resource management has been organised around the definition of working groups and the delegation to an identified responsible of each group composition. In this paper we illustrate the user/group storage management, and the development and operational experience at the CMS CERN Tier-2 centre in the 2012-2015 period.

23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

CERN Multimedia

Jean-Claude Gadmer

2010-01-01

23rd June 2010 - University of Bristol Head of the Aerospace Engineering Department and Professor of Aerospace Dynamics N. Lieven visiting CERN control centre with Beams Department Head P. Collier, visiting the LHC superconducting magnet test hall with R. Veness and CMS control centre with Collaboration Spokesperson G. Tonelli and CMS User J. Goldstein.

HUG sets up an emergency operations centre on the CERN site

CERN Multimedia

Antonella Del Rosso

2015-01-01

Discussions between CERN and the Hôpitaux universitaires de Genève (HUG), under the aegis of the Swiss authorities, have resulted in the setting-up of an emergency operations centre on the CERN site. This will be the operations base for an emergency doctor, a medical emergency vehicle and a driver. Located on the Swiss part of the Meyrin site, close to Building 57, it will be inaugurated on 20 May.   SMUR team based at CERN. CERN’s medical staff and fire-fighters dispense first aid but in medical emergencies they are obliged to call on outside services to treat and transfer patients to hospital. In the Canton of Geneva, this service is provided by HUG via the 144 emergency line. But HUG is based on the eastern side of Geneva, a long way from CERN, and response times can be substantial. In order to improve the safety of the growing number of people on the site, CERN asked Switzerland, as one of its Host States, to help it reduce the medical emergency response t...

Proposal for the award of a contract for the design, supply, installation and commissioning of a Heating, Ventilation and Air-Conditioning (HVAC) system for the computer room of the CERN Control Centre

CERN Document Server

2012-01-01

Proposal for the award of a contract for the design, supply, installation and commissioning of a Heating, Ventilation and Air-Conditioning (HVAC) system for the computer room of the CERN Control Centre

Migration of the CERN IT data centre support system to ServiceNow

International Nuclear Information System (INIS)

Alvarez Alonso, R; Arneodo, G; Barring, O

2014-01-01

The large potential and flexibility of the ServiceNow infrastructure based on 'best practises' methods is allowing the migration of some of the ticketing systems traditionally used for the monitoring of the servers and services available at the CERN IT Computer Centre. This migration enables the standardization and globalization of the ticketing and control systems implementing a generic system extensible to other departments and users. One of the activities of the Service Management project together with the Computing Facilities group has been the migration of the ITCM structure based on Remedy to ServiceNow within the context of one of the ITIL processes called Event Management. The experience gained during the first months of operation has been instrumental towards the migration to ServiceNow of other service monitoring systems and databases. The usage of this structure is also extended to the service tracking at the Wigner Centre in Budapest.

Migration of the CERN IT Data Centre Support System to ServiceNow

Science.gov (United States)

Alvarez Alonso, R.; Arneodo, G.; Barring, O.; Bonfillou, E.; Coelho dos Santos, M.; Dore, V.; Lefebure, V.; Fedorko, I.; Grossir, A.; Hefferman, J.; Mendez Lorenzo, P.; Moller, M.; Pera Mira, O.; Salter, W.; Trevisani, F.; Toteva, Z.

2014-06-01

The large potential and flexibility of the ServiceNow infrastructure based on "best practises" methods is allowing the migration of some of the ticketing systems traditionally used for the monitoring of the servers and services available at the CERN IT Computer Centre. This migration enables the standardization and globalization of the ticketing and control systems implementing a generic system extensible to other departments and users. One of the activities of the Service Management project together with the Computing Facilities group has been the migration of the ITCM structure based on Remedy to ServiceNow within the context of one of the ITIL processes called Event Management. The experience gained during the first months of operation has been instrumental towards the migration to ServiceNow of other service monitoring systems and databases. The usage of this structure is also extended to the service tracking at the Wigner Centre in Budapest.

A computer simulation of the new Control Centre (CCC)

CERN Multimedia

2004-01-01

In a development crucial for the success of the LHC, CERN will build a Control Centre (CCC) for the operation of all its beams and accelerators. The CCC will be an extension of the existing PCR building at Prévessin and is due to be operational by 1 February 2006.

The centre of the action

CERN Multimedia

2008-01-01

The CERN Control Centre (CCC) has all the ingredients of an action movie control room: hundreds of screens, technicians buzzing in and out, huge floor-to-ceiling windows revealing the looming vista of a mountain range, flashing lights, microphones… This is the place where not just the LHC, but the whole of CERN’s accelerator complex and technical support is based - truly the centre of the action at CERN.

7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

CERN Multimedia

Anna Pantelia

2013-01-01

7 March 2013 -Stanford University Professor N. McKeown FREng, Electrical Engineering and Computer Science and B. Leslie, Creative Labs visiting CERN Control Centre and the LHC tunnel with Director for Accelerators and Technology S. Myers.

Proposal for the award of an industrial support contract for operation of the Computer Centre at CERN

CERN Document Server

2006-01-01

This document concerns the award of a contract for operation of the Computer Centre at CERN. The Finance Committee is invited to agree to the negotiation of a contract with the consortium DATA CONVERSION SYSTEMS (CH) - INTRACOM BULGARIA (BG), the lowest bidder, for the operation of the Computer Centre at CERN for a period of three years for a total amount not exceeding 2 046 570 Swiss francs, not subject to revision for the first two years. The contract will include options for two one-year extensions beyond the initial three-year period. 2006/55/5/e

An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis

CERN Document Server

Page, S

2011-01-01

The LHC Island of the CERN Control Centre is a busy working environment with many status displays and running software applications. An audible event announcer was developed in order to provide a simple and efficient method to notify the operations team of events occurring within the many subsystems of the accelerator. The LHC Announcer uses speech synthesis to report messages based upon data received from multiple sources. General accelerator information such as injections, beam energies and beam dumps are derived from data received from the LHC Timing System. Additionally, a software interface is provided that allows other surveillance processes to send messages to the Announcer using the standard control system middleware. Events are divided into categories which the user can enable or disable depending upon their interest. Use of the LHC Announcer is not limited to the Control Centre and is intended to be available to a wide audience, both inside and outside CERN. To accommodate this, it...

Commissaire Moulin visits CERN

CERN Multimedia

CERN Bulletin

2014-01-01

The French actor and film-maker Yves Rénier was shown around the Laboratory on Friday 6 June by friends at CERN.   Yves Rénier at LEIR. (Photo: Ludwig Pregernig) A keen diver and star of the long-running French television police drama Commissaire Moulin, Yves Rénier took advantage of a stopover in Geneva on his way to the Red Sea to meet up with his friends from the CERN Diving Club, who were only too pleased to take him on a tour of the Laboratory. In the morning, Yves Rénier visited the CERN Control Centre (CCC), Linac2 and LEIR. After lunch at the brasserie in Restaurant No. 2, the actor continued his tour with the CERN Computer Centre, the SM18 superconducting magnet test facility, and lastly the ATLAS experiment. “Thank you so much for showing me around and introducing me to a world I knew so little about,” confided Yves Rénier. “It’s fascinating to see so many scientists of different cultures,...

Spaceflight participant visits CERN!

CERN Multimedia

Kathryn Coldham

2016-01-01

On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

Three European ministers visit CERN

CERN Multimedia

2007-01-01

There have been three ministerial visits to CERN this month. Gediminas Kirkilas, Prime Minister of Lithuania, and Robert Aymar, CERN’s Director-General.On 2 July, the Prime Minister of Lithuania, Gediminas Kirkilas, was welcomed by CERN’s Director-General, Robert Aymar, before being taken on a visit of the ATLAS cavern at Point 2 and the LHC tunnel. Michal Sewerynski, Poland’s Minister for Science and Higher Education, and Robert Aymar, CERN’s Director-General.Ten days later, Poland’s Minister for Science and Higher Education, Michal Sewerynski, visited the CMS cavern and assembly hall and the LHC tunnel. He was also given a tour of the LHC Computer Centre and the CERN Control Centre. His visit was rounded off with a presentation of Polish companies involved in CERN’s activities, followed by a meeting with Polish personnel working at CERN. J�...

The CERN PC farm

CERN Multimedia

Serge Bellegarde

2005-01-01

Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing the processing power to be shared between computer centres around the world.

CERN, Geneva

CERN Multimedia

2007-01-01

"The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

30 January 2012 - Danish National Research Foundation Chairman of board K. Bock and University of Copenhagen Rector R. Hemmingsen visiting ATLAS underground experimental area, CERN Control Centre and ALICE underground experimental area, throughout accompanied by J. Dines Hansen and B. Svane Nielsen; signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci and Head of International Relations F. Pauss.

CERN Document Server

Jean-Claude Gadmer

2012-01-01

30 January 2012 - Danish National Research Foundation Chairman of board K. Bock and University of Copenhagen Rector R. Hemmingsen visiting ATLAS underground experimental area, CERN Control Centre and ALICE underground experimental area, throughout accompanied by J. Dines Hansen and B. Svane Nielsen; signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci and Head of International Relations F. Pauss.

Mr Bikash Sinha, Director of SAHA & VECC and Prof. Rolf Heuer, Director general of CERN, sign a collaboration agreements between SAHA (Saha Institute of Nuclear Physics), VECC (Variable Energy Cyclotron Centre), India and CERN ISOLDE.

CERN Multimedia

Maximilien Brice

2009-01-01

Mr Bikash Sinha, Director of SAHA & VECC and Prof. Rolf Heuer, Director general of CERN, sign a collaboration agreements between SAHA (Saha Institute of Nuclear Physics), VECC (Variable Energy Cyclotron Centre), India and CERN ISOLDE.

21 June 2010 - TUBITAK Vice President A. Adli signing the guest book with CERN Director-General R. Heuer, visiting the ATLAS control room at Point 1 with Former Collaboration Spokesperson P. Jenni and CMS Control Centre, building 354, with Collaboration Spokesperson G. Tonelli. Throughout accompanied by Adviser J. Ellis.

CERN Multimedia

Maximilien Brice

2010-01-01

21 June 2010 - TUBITAK Vice President A. Adli signing the guest book with CERN Director-General R. Heuer, visiting the ATLAS control room at Point 1 with Former Collaboration Spokesperson P. Jenni and CMS Control Centre, building 354, with Collaboration Spokesperson G. Tonelli. Throughout accompanied by Adviser J. Ellis.

CERN Infrastructure Evolution

CERN Document Server

Bell, Tim

2012-01-01

The CERN Computer Centre is reviewing strategies for optimizing the use of the existing infrastructure in the future, and in the likely scenario that any extension will be remote from CERN, and in the light of the way other large facilities are today being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote computer centres. This presentation will give the details on the project’s motivations, current status and areas for future investigation.

Computer Security: Security operations at CERN (4/4)

CERN Document Server

CERN. Geneva

2012-01-01

Stefan Lueders, PhD, graduated from the Swiss Federal Institute of Technology in Zurich and joined CERN in 2002. Being initially developer of a common safety system used in all four experiments at the Large Hadron Collider, he gathered expertise in cyber-security issues of control systems. Consequently in 2004, he took over responsibilities in securing CERN's accelerator and infrastructure control systems against cyber-threats. Subsequently, he joined the CERN Computer Security Incident Response Team and is today heading this team as CERN's Computer Security Officer with the mandate to coordinate all aspects of CERN's computer security --- office computing security, computer centre security, GRID computing security and control system security --- whilst taking into account CERN's operational needs. Dr. Lueders has presented on these topics at many different occasions to international bodies, governments, and companies, and published several articles. With the prevalence of modern information technologies and...

The control consoles for the CERN 400 GeV proton synchrotron

CERN Document Server

Beck, F; Shering, G

1977-01-01

The European Organization for Nuclear Research (CERN) provides research facilities for investigation into the physics of high energy particles for physicists from 11 European member states and visitors from several continents. To this end it constructs and operates large accelerators, and of these is a 400 GeV proton synchrotron, which is built in a circular tunnel cut into the bedrock, the majority of the equipment being housed in a number of buildings scattered over the surface of the site. Data are gathered in local units, multiplexed into a CAMAC interface, collected into local computers, and sent down high-speed data links to the control centre. Data-collection rates vary from leisurely status changes to megahertz transfer rates on the data links. All links are connected to a message-transfer system in the control centre, as are connections from various central computers giving library, graphics and alarm facilities. The three computers driving the three control consoles are similarly attached to the mes...

CERN openlab Open Day

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is the unique public-private partnership between CERN and leading companies in the field of information and communication technology. The programme is now entering an exciting new phase and is expanding to include other public research organisations for the first time. A special event will be held at CERN to mark this occasion.   CERN openlab was created in 2001 and is now entering its fifth three-year phase (2015-2017). Its mission is to accelerate the development of cutting-edge solutions to be used by the scientific community to control the operations of complex machines and to analyse the vast amounts of data produced by physics experiments. During Run 2 of the LHC, it is expected that the CERN Data Centre will store more than 30 petabytes of data per year from the LHC experiments, which is equivalent to about 1.2 million Blu-ray discs, or 250 years of HD video. Testing in this demanding environment provides the companies collaborating in CERN openlab with valuable feedback o...

An operational event announcer for the LHC control centre using speech synthesis

International Nuclear Information System (INIS)

Page, S.; Alemany Fernandez, R.

2012-01-01

The LHC Island of the CERN Control Centre is a busy working environment with many status displays and running software applications. An audible event announcer was developed in order to provide a simple and efficient method to notify the operations team of events occurring within the many subsystems of the accelerator. The LHC Announcer uses speech synthesis to report messages based upon data received from multiple sources. General accelerator information such as injections, beam energies and beam dumps are derived from data received from the LHC Timing System. Additionally, a software interface is provided that allows other surveillance processes to send messages to the Announcer using the standard control system middle-ware. Events are divided into categories which the user can enable or disable depending upon their interest. Use of the LHC Announcer is not limited to the Control Centre and is intended to be available to a wide audience, both inside and outside CERN. To accommodate this, it was designed to require no special software beyond a standard web browser. This paper describes the design of the LHC Announcer and how it is integrated into the LHC operational environment. (authors)

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character.

CERN safety reaches out to medicine

CERN Document Server

2001-01-01

What do CERN and other scientific organizations like ESA and ESO have in common with neurosurgery and airlines? At first sight, not much. But all require sound safety management. CERN's expertise in this field was recently highlighted when two CERN engineers were invited to talk at an international conference on Quality Management and Risk Control in Neurosurgery.CERN has long been recognised as a centre of excellence in physics, and its spin-offs in fields such as medicine have been widely hailed. But increasingly, the Laboratory's expertise in the management of large international collaborations is also being recognised. Contacts between CERN and organizations like ESA and ESO, as well as with industry, bear witness to this fact. One recent example comes from Airbus Industrie, which organized a meeting in 1998 with CERN to compare notes on project management, safety, and quality assurance. Safety management is a recognised speciality in the field of project management and at CERN, TIS and the safety offici...

Control week at CERN

CERN Multimedia

2008-01-01

From 19 to 23 May, the IT-CO Group will be organising the first "Poster forum" at CERN on the theme of process control. Process control lies at the heart of numerous conferences across the world in which CERN takes an active part. Many posters have been produced, and these deserve to be presented to everybody in order to give value to, share and derive maximum benefit from the software, tools and methods developed and used at CERN in this field. This initiative will also allow each group, section and member of the personnel to present their work to others at the Laboratory. The forum will take place from 19 to 23 May in the main hall of Building 500, leading to Restaurant No. 1, on the Meyrin site. To stimulate discussions and exchanges, the authors will be in attendance by their posters on Thursday 22 May between 12 noon and 2.00 p.m. Interested? If you wish to take part and present your work, please contact mathias.philippe.dutou...

Advanced Control Facility for the CERN-UNICOS Framework

CERN Document Server

Pezzetti, M; Coppier, H

2010-01-01

CERN, during last decade, has extensively applied the CERN/UNICOS framework to large scale cryoplant control system. An increase of interested to advanced control techniques and innovative simulation environment applied to cryogenic processes has also occur. Since new control algorithm development into UNICOS framework requires significant time, a control testing platform which can be externally connected can improve and simplify the procedure of testing advanced controllers implementation. In this context, the present paper describes the development of a control testing tool at CERN, which allows rapid control strategies implementation through the Matlab/Simulink® environment, coupled with the large scale cryogenics UNICOS control system or with the CERN PROCOS simulation environment. The time delays which are inherently introduced by network links and communication protocols are analyzed and experimentally identified. Security and reliability issues are also discussed.

AMS: From the ISS to CERN

CERN Multimedia

Jordan Juras

2011-01-01

The week of 16 May 2011 saw the successful launch and installation of the Alpha Magnetic Spectrometer aboard the International Space Station. Only 4 minutes after the installation had been completed, cosmic event data started to be recorded and began its long journey from low Earth orbit to the newly constructed Payload Operations and Control Centre located on CERN's Prévessin site.    The AMS Control Room in the newly constructed Building 946 in CERN’s Prévessin site. Unlike the detectors around the LHC ring, the Alpha Magnetic Spectrometer (AMS) does not have the luxury of a physical connection to data-processing infrastructure. Instead, cosmic events and data on AMS itself must undergo a lengthy journey before they arrive at the Payload and Operations on the Control Centre (POCC - building 946 Prévessin site) of the AMS collaboration. A joint effort between NASA and CERN makes this transmission possible. “The Space Stat...

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character. More information: http://www.rezonance.ch, or view the joint UK event program

The CERN Library

CERN Multimedia

Hester, Alec G

1968-01-01

Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

Prince Albert II of Monaco visits CERN

CERN Multimedia

2009-01-01

With a strong curiosity for the work of CERN, HSH Prince Albert II of Monaco visited CMS and the CERN Control Centre on 2 September. "The Prince is interested in and sensitive to what CERN is doing. Monaco is closely linked to France, which is an important member of CERN. He wishes to express his help to the scientific community in every trip. He wants to meet scientists and to be really personally involved," explained Francois Chantrait, Head of the Press Service of the Prince’s Palace. CERN Director-General Rolf Heuer welcomed the Prince of Monaco to Point 5 with a presentation about CERN before they descended 100 metres underground to see the CMS experiment. Although the detector was closed up for test runs, he was able to see its grand scale as well as look at some of the intricate sample parts exhibited by CMS Spokesperson, Jim Virdee. The Prince wrote in the CERN Visitors’ Book that he perceives a realisation of promisin...

European Researchers’ Night: Activities at CERN for All Audiences | 30 September

CERN Multimedia

2016-01-01

On Friday 30 September, CERN will be among the scientific organisations and institutes of over 300 towns and cities in Europe taking part in the European Researchers’ Night.   Activities for young and old, scientists and non-scientists alike, will be available in several languages from 6 p.m. to 11 p.m., mainly in the Globe of Science and Innovation. Visits to other venues will depart from this point. The programme will include: screenings of science documentaries and prize-winning short films, guided tours of the ATLAS Visitor Centre, visits to the Universe of Particles exhibition.   Two food trucks will be available to please your taste buds and quench your thirst. If you’re unable to travel to CERN, take a virtual tour of the experiments from your armchair! The tours will be conducted in several languages and will be webcast live from the various CERN venues as follows: 6 p.m. - CERN Control Centre, the nerve centre from which all of CERN’s accelerators a...

Member State Event: Telling CERN's Story

CERN Multimedia

2004-01-01

As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right of the photograph), co-inventor of the Web and currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February. This was not their first appearance before a non-specialist audience (almost 1000 people that day!) eager to find out what goes on in a unique research centre like CERN as talking about the Laboratory's activities and its history are part and parcel of their work for the Organization. Anniversary Events in the Member States: This 'Science Thursday' event devoted to CERN was one of Italy's contributions to CERN's fiftieth anniversary celebrations. Coming up soon in the Member States: Italy International Centre...

18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

CERN Multimedia

Jean-Claude Gadmer

2011-01-01

18 January 2011 - The British Royal Academy of Engineering in the LHC tunnel with CMS Collaboration Spokesperson G. Tonelli and Beams Department Head P. Collier; in the CERN Control Centre with P. Collier and LHC superconducting magnet test hall with Technology Department Head F. Bordry.

23rd June 2010 - Australian Nuclear Science and Technology Organization Chief Executive Officer A. Paterson signing a Joint Statement of Intent and the guest book with CERN Director-General R. Heuer; in the ATLAS visitor centre and control room with Former Collaboration Spokesperson P. Jenni.

CERN Multimedia

Maximilien Brice

2010-01-01

23rd June 2010 - Australian Nuclear Science and Technology Organization Chief Executive Officer A. Paterson signing a Joint Statement of Intent and the guest book with CERN Director-General R. Heuer; in the ATLAS visitor centre and control room with Former Collaboration Spokesperson P. Jenni.

Stephen Hawking returns to CERN

CERN Multimedia

2009-01-01

Stephen Hawking visiting the CERN Control Centre.If you happened to pass through Building 4 during the first weeks of September, you might have noticed the name of Stephen Hawking on one of the doors on the second floor, which hosts most of CERN theorists’ offices. Three years after his last visit to CERN, Stephen Hawking gladly accepted the invitation from the University of Geneva to hold a public lecture on the occasion of its 450th anniversary and requested an office at CERN for the length of his stay. The "master of the Universe", as the Geneva University journal dubbed him, attracted over 4000 people to his lecture on "The Creation of the Universe" held on 15 September in the Main Auditorium of Uni Dufour. His more technical colloquium on the same subject at CERN a week earlier, was no less popular and quite "provocative" according to some of the physicists in the audience. With his repeated reference to the "non-need" for a "creating agent" for the Universe, mo...

Monitoring Control Applications at CERN

CERN Document Server

Bernard, F; Milcent, H; Petrova, L B; Varela, F

2011-01-01

The Industrial Controls and Engineering (EN-ICE) group [1] of the Engineering Department at CERN has produced, and is responsible for the operation of around 60 applications, which control critical processes in the domains of cryogenics, quench protection systems, power interlocks for the Large Hadron Collider and other subsystems of the accelerator complex. These applications require 24/7 operation and a quick reaction to problems. For this reason the EN-ICE group is presently developing the Monitoring Operation of cOntrols Networks (MOON) tool to detect, anticipate and inform of possible anomalies in the integrity of the applications. The tool builds on top of Simatic WinCC Open Architecture (WinCC OA) [2] SCADA and makes usage of the Joint COntrols Project (JCOP) [3] and the UNified INdustrial COntrol System (UNICOS) [4] Frameworks developed at CERN. The tool provides centralized monitoring and software management of the different elements integrating the control systems like Windows and L...

MONITORING CONTROL APPLICATIONS AT CERN

CERN Document Server

Bernard, F; Milcent, H; Petrova, L B; Varlea, F

2011-01-01

The Industrial Controls and Engineering (EN-ICE) group [1] of the Engineering Department at CERN has produced, and is responsible for the operation of around 60 applications, which control critical processes in the domains of cryogenics, quench protection systems, power interlocks for the Large Hadron Collider and other sub-systems of the accelerator complex. These applications require 24/7 operation and a quick reaction to problems. For this reason the EN-ICE group is presently developing the Monitoring Operation of cOntrols Networks (MOON) tool to detect, anticipate and inform of possible anomalies in the integrity of the applications. The tool builds on top of Simatic WinCC Open Architecture (WinCC OA) [2] SCADA and makes usage of the Joint COntrols Project (JCOP) [3] and the UNified INdustrial COntrol System (UNICOS) [4] Frameworks developed at CERN. The tool provides centralized monitoring and software management of the different elements integrating the control systems like Windows and Linux servers, PL...

A heatwave at CERN

CERN Multimedia

Anaïs Schaeffer

2011-01-01

It's getting hot in Buildings 201 and 860, over-heating even... But no reason to panic! We're talking about the superheated water boilers of CERN's two heating plants, which heat all the buildings on the Meyrin and Prévessin sites.   View of the three boilers and the control centre of the Meyrin heating plant. CERN's two heating plants each comprise three gas* boilers, with generators of 15 MW in the case of Meyrin and 5 MW in the case of Prévessin. Both inject pressurised water, superheated to 125 degrees, into several kilometres of pipes, 22 km on the Meyrin site and 5 km in Prévessin. "A single boiler is sufficient most of the time but a second kicks in automatically during very cold weather, and a third is there on stand-by," explains Christophe Martel, head of the GS Department section responsible for CERN's heating and air-conditioning systems. All of CERN's buildings have a sub-station that receives the superheated water from the boilers an...

16th November 2010 - Chinese Vice Minister of Science and Technology J. Cao signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss.

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1011300 19-41: visiting SM18 with F. Bertinelli CERN-HI-1011300 43-66; visiting CMS Control Centre in Meyrin with Collaboration Spokesperson G. Tonelli CERN-HI-1011300 67-85: in the ATLAS Visitor Centre with Former Collaboration Spokesperson P. Jenni CERN-HI-1011300 86-87: meeting young representatives of the CERN Chinese community in the Glassbox, restaurant 1.

9 February 2012 - Permanent Representative of the Kingdom of Spain to the United Nations Office at Geneva and other International Organisations, Ambassador A. Santos Maraver signing the guest book with CERN Director-General; in the CERN Control Centre with N. Catalan; visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela; throughout accompanied by Adviser J. Salicio Diez and Former Physics Deputy Department Head L. Alvarez Gaumé.

CERN Multimedia

Visual Media Office

2012-01-01

9 February 2012 - Permanent Representative of the Kingdom of Spain to the United Nations Office at Geneva and other International Organisations, Ambassador A. Santos Maraver signing the guest book with CERN Director-General; in the CERN Control Centre with N. Catalan; visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela; throughout accompanied by Adviser J. Salicio Diez and Former Physics Deputy Department Head L. Alvarez Gaumé.

ALICE opens its new nerve centre

CERN Multimedia

Antonella Del Rosso

2014-01-01

Twenty-nine fully equipped and ergonomic workstations, one meeting area and 11 large format screens in a completely refurbished room: the ALICE Run Control Centre (ARC) implements the best and newest solutions for its shift workers and expert operators, including access for persons with reduced mobility and very soon a magic window for Point 2 visitors.   The ALICE Run Control Centre. “Our initial intention was just to optimise the old layout,” says Federico Ronchetti from Laboratori Nazionali di Frascati (Italy), a CERN scientific associate currently appointed as ALICE Run Coordinator and person in charge of the ALICE Consolidation Task Force. “However, during the review process, we carried out a study of all the existing control rooms at CERN and became aware we needed a radical change. Hence we started planning a complete redesign of the workspace.” Designed and equipped over many years, the old ALICE control room did not have enough space to fit al...

Monitoring Evolution at CERN

CERN Document Server

Andrade, P; Murphy, S; Pigueiras, L; Santos, M

2015-01-01

Over the past two years, the operation of the CERN Data Centres went through significant changes with the introduction of new mechanisms for hardware procurement, new services for cloud provisioning and configuration management, among other improvements. These changes resulted in an increase of resources being operated in a more dynamic environment. Today, the CERN Data Centres provide over 11000 multi-core processor servers, 130 PB disk servers, 100 PB tape robots, and 150 high performance tape drives. To cope with these developments, an evolution of the data centre monitoring tools was also required. This modernisation was based on a number of guiding rules: sustain the increase of resources, adapt to the new dynamic nature of the data centres, make monitoring data easier to share, give more flexibility to Service Managers on how they publish and consume monitoring metrics and logs, establish a common repository of monitoring data, optimise the handling of monitoring notifications, and replace the previous ...

Over one million followers reached in CERN TweetUp

CERN Multimedia

Katherine Chapman

2012-01-01

More than a million followers were reached on Twitter during CERN’s first ever “TweetUp”. On 25 July, 5 lucky Twitter followers, or "Tweeps" as they are known, visited CERN to take part in events held on the same day with the STS-134 astronauts. The Tweetup gave the online community a chance to ask questions and explore areas of CERN through the eyes of the tweeps, prompting over 1,000 tweets and re-tweets between them in 24 hours.   Loic Bommersbach, Lucy McKenna, Astrid Chantelauze (KIT), Nick Howes, Angeliki Kanellopoulou, Maud Ali-Cherif (ESA), Julien Harrod (ESA), Katherine Chapman (CERN), and Simon Bierwald outside the CERN Control Centre. Five winners of a competition announced on Twitter were invited to come to CERN and spend a day behind the scenes, taking part in events organised to celebrate the AMS experiment that was launched in May 2011. The aim was to give tweeps the opportunity to explore CERN and share their experiences, allowi...

6th September 2011 - Argentine Minister of Science, Technology and Innovation J. L. Barañao signing the guest book with CERN Director-General R. Heuer.

CERN Multimedia

2011-01-01

In the ATLAS Visitors Centre with Collaboration Spokesperson F. Gianotti and National Contact Physicist M. T. Dova. ATLAS Collaboration M. Mikenberg present. CERN-HI-1109229 24: In the CERN Control centre, from left to right: First Secretary at the Permanent Mission R. Bardoneschi, National Contact Physicist M.T. Dova, CERN Adviser for Latin America J. Salicio Diez, Minister Barañao and Beams Operation Group M. Benedikt.

28 June 2012 - Ambassador I. Piperkov, Permanent Representative of Bulgaria to the United Nations Office and other international organisations in Geneva and Spouse visiting CMS experimental area with Collaboration Deputy Spokesperson T. Camporesi and CERN Control Centre with M. Benedikt.Senior physicist L. Litov accompanies the delegation throughout.

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

28 June 2012 - Ambassador I. Piperkov, Permanent Representative of Bulgaria to the United Nations Office and other international organisations in Geneva and Spouse visiting CMS experimental area with Collaboration Deputy Spokesperson T. Camporesi and CERN Control Centre with M. Benedikt.Senior physicist L. Litov accompanies the delegation throughout.

Teachers come to learn at CERN!

CERN Multimedia

Patrice Loïez

2003-01-01

PhysicsTeachers@CERN is an annual three-day meeting at CERN for teachers from all over Europe. The programme includes seminars, visits and educational activities. It is designed to give physics teachers new insights into contemporary particle physics. The fifty participants in the 2003 meeting, which took place from 21 to 23 February, are pictured in the garden adjoining Microcosm, CERN's on-site science centre.

Monitoring control applications at CERN

International Nuclear Information System (INIS)

Bernard, F.; Gonzalez, M.; Milcent, H.; Petrova, L.B.; Varela, F.

2012-01-01

The Industrial Controls and Engineering (EN-ICE) group of the Engineering Department at CERN has produced, and is responsible for the operation of around 60 applications, which control critical processes in the domains of cryogenics, quench protection systems, power interlocks for the Large Hadron Collider and other subsystems of the accelerator complex. These applications require 24/7 operation and a quick reaction to problems. For this reason the EN-ICE group is presently developing the Monitoring Operation of controls Networks (MOON) tool to detect, anticipate and inform of possible anomalies in the integrity of the applications. The tool builds on top of Simatic WinCC Open Architecture (WinCC OA) SCADA and makes usage of the Joint Controls Project (JCOP) and the Unified Industrial Control System (UNICOS) Frameworks developed at CERN. The tool provides centralized monitoring and software management of the different elements integrating the control systems like Windows and Linux servers, PLCs, applications, etc. Although the primary aim of the monitoring tool is to assist the members of the EN-ICE Standby Service, the tool may offer different levels of detail, which also enables experts to diagnose and troubleshoot problems. In this paper, the scope, functionality and architecture of the tool are presented and some initial results on its performance are summarized. (authors)

CERN in the park

CERN Multimedia

2002-01-01

CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

Quality Management of CERN Vacuum Controls

CERN Document Server

Antoniotti, F; Fortescue-Beck, E; Gama, J; Gomes, P; Le Roux, P; Pereira, H F; Pigny, G

2014-01-01

The vacuum controls Section (TE-VSC-ICM) is in charge of the monitoring, maintenance and consolidation of the control systems of all accelerators and detectors in CERN; this represents 6 000 instruments distributed along 128 km of vacuum chambers, often of heterogeneous architectures and of diverse

Open Hardware For CERN's Accelerator Control Systems

CERN Document Server

van der Bij, E; Ayass, M; Boccardi, A; Cattin, M; Gil Soriano, C; Gousiou, E; Iglesias Gonsálvez, S; Penacoba Fernandez, G; Serrano, J; Voumard, N; Wlostowski, T

2011-01-01

The accelerator control systems at CERN will be renovated and many electronics modules will be redesigned as the modules they will replace cannot be bought anymore or use obsolete components. The modules used in the control systems are diverse: analog and digital I/O, level converters and repeaters, serial links and timing modules. Overall around 120 modules are supported that are used in systems such as beam instrumentation, cryogenics and power converters. Only a small percentage of the currently used modules are commercially available, while most of them had been specifically designed at CERN. The new developments are based on VITA and PCI-SIG standards such as FMC (FPGA Mezzanine Card), PCI Express and VME64x using transition modules. As system-on-chip interconnect, the public domain Wishbone specification is used. For the renovation, it is considered imperative to have for each board access to the full hardware design and its firmware so that problems could quickly be resolved by CERN engineers or its ...

CERN, Accelerating Science

CERN Multimedia

AUTHOR|(CDS)2086185

2015-01-01

What is the Universe made of? Where did it come from, where is it going and why does it behave the way it does? These are some of the questions that CERN set out to address when a small number of pioneering scientists created Europe’s first scientific international organization. Founded in 1954, in the aftermath of the Second World War, CERN is not only a first-class centre for fundamental research but also a pioneering adventure in international collaboration.

German visits to CERN

CERN Multimedia

2007-01-01

State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

CERN servers go to Mexico

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Wednesday, 26 August, 384 servers from the CERN Computing Centre were donated to the Faculty of Science in Physics and Mathematics (FCFM) and the Mesoamerican Centre for Theoretical Physics (MCTP) at the University of Chiapas, Mexico.   CERN’s Director-General, Rolf Heuer, met the Mexican representatives in an official ceremony in Building 133, where the servers were prepared for shipment. From left to right: Frédéric Hemmer, CERN IT Department Head; Raúl Heredia Acosta, Deputy Permanent Representative of Mexico to the United Nations and International Organizations in Geneva; Jorge Castro-Valle Kuehne, Ambassador of Mexico to the Swiss Confederation and the Principality of Liechtenstein; Rolf Heuer, CERN Director-General; Luis Roberto Flores Castillo, President of the Swiss Chapter of the Global Network of Qualified Mexicans Abroad; Virginia Romero Tellez, Coordinator of Institutional Relations of the Swiss Chapter of the Global Network of Qualified Me...

Higgs Reconstructed at CERN’s Computer Centre

CERN Multimedia

2012-01-01

Thanks to the enormous computing capacity of the CERN Computer Centre, which hosts about 12,000 servers with 16,000 CPUs (i.e. 64,000 computing cores) and 64,000 hard-disks distributed over 1,100 racks and storing another 22 PB (PetaByte, i.e. 22 million billion bytes) of LHC data during 2011, CERN computing specialists have managed for the first time to reconstruct the “Higgs” (see photo below in which the newly installed racks are highlighted).   In fact, as clear physics evidence of the Higgs is still pending and expected to be established in 2012, the CERN Computer Centre operators have instead rearranged their computer racks in the Computer Centre (Building 513) to spell the word “Higgs”. Bruce Peppa, group leader of the IT/CC group who manages the Computer Centre, said “As many people have noticed, for a few months serious construction work has been going on in the annex to the CERN Computer Centre. With the installation of more servers ...

India and CERN: a collaboration in good shape

CERN Multimedia

2002-01-01

The addenda were signed by the director of India's Centre for Advanced Technology, Dilip Bhawalkar, and LHC project leader, Lyn Evans. Back row, from left to right: P.J. Bryant, Ph. Lebrun, V.C. Sahni, M. Karmarkar, S. Bhave, G. Govindarajan. The director of India's Centre for Advanced Technology, Dilip Bhawalkar, and LHC project leader Lyn Evans have just signed the final addenda for the first Indian contribution to the LHC at a meeting of the Indian Department of Atomic Energy (DAE) - CERN joint committee. The main component of this contribution covers the superconducting corrector magnets for the accelerator's main dipoles and quadrupoles. During their visit, members of the DAE delegation visited the assembly laboratory where Indian engineers working at CERN under the CERN-India co-operation agreement are involved in the warm and cold magnet measurements of the LHC magnets. The Indian collaboration with CERN started in 1991, when India signed a co-operation Agreement with CERN with a view to participatin...

Integrating CERN e-groups into TWiki access control.

CERN Document Server

Jones, PL; Hoymr, N; CERN. Geneva. IT Department

2010-01-01

Wikis allow for easy collaborative editing of documents on the web for users located in different buildings, cities or even countries. TWiki culture lends to open free form editing and most pages are world readable and editable by CERN authenticated users, however access control is possible and is used to protect sensitive documents. This note discusses the integration of E-groups for authorisation purposes at CERN.

Apprenticeship at CERN

CERN Multimedia

Staff Association

2016-01-01

In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

CERN's technical apprentices during their apprenticeships

CERN Multimedia

Adrian Billet

2004-01-01

CERN starting training apprentices in 1966 at the request of the Geneva authorities. The programme was consolidated with the opening of the training centre in 1971. In recent years CERN has taken on seven new technical apprentices each year (four in electronics, three in physics laboratory work), plus one or two administrative apprentices, such that there always are around 30 apprentices in total at CERN. The programme is highly regarded in Geneva by the authorities, industry, schools and young people, and contributes very positively to CERN's local image. Since the beginning 160 young people have now successfully completed their apprenticeships at CERN. Unlike some other employers, as a general rule CERN does not take on its ex-apprentices as staff; on completing their years at CERN the apprentices usually go on to higher education or are sought after by other employers.

News regarding Mobility at CERN

CERN Multimedia

2016-01-01

CERN Bikes CERN owns a fleet of more than 500 bikes, managed by the Mobility Centre (bdg. 6167). Members of CERN personnel (MPE and MPA) can use these free of charge during work-related activities at CERN (a security deposit is requested). Between 1st of June to 30th September anyone, except Summer Students, who wish to benefit from this service shall pay 1 CHF per day. As from the 1st of August, the CERN bike rental requests are done via the Service Now (SNOW) Portal. For more information, please consult: http://cern.ch/bike-rental.   CERN Cars More than 60 vehicles are available for rent by members of personnel (MPE and MPA) at the Mobility Center (bdg. 6167). As from the 5th of September you can submit reservation requests via the new EDH Car Rental Request document. As a reminder, the Terms of Use are the following: Operational Circular n° 4 (rev.1), governing the use of CERN vehicles;   Any use of the service must be authorised by the concerned Head of Department or Team Leader...

Upgrade of the CERN telephone exchange

CERN Multimedia

2006-01-01

As part of the upgrade of telephone services, maintenance work will be carried out on the CERN switching centre between 8.00 p.m. and 10.00 p.m. on Monday 9 October. Telephone services may be disrupted and possibly even interrupted during this time. We apologise in advance for any inconvenience this may cause. CERN TELECOM Service

Radiation control on the CERN sites

International Nuclear Information System (INIS)

Tuyn, J.W.N.; Alberto, D.; Lamberet, C.; Roubaud, G.; Wolf, J.

1998-01-01

The Site Section of the Radiation Protection Group is in charge of general radiation protection activities related to the two CERN sites. During 1997 these activities were: - stray radiation monitoring, - radioactive waste management, - storage of radioactive items, - radioactive source control, - radioactive transport, - control of non-ionizing radiation, - thermoluminescence dosimetry, - radioactivity measurements. A summary of these activities is presented in this part

Radiation control on the CERN sites

International Nuclear Information System (INIS)

Hoefert, M.; Lamberet, C.; Otto, T.; Roubaud, G.; Wolf, J.

1999-01-01

The Site Section of the Radiation Protection Group is in charge of general radiation protection activities related to the two CERN sites. During 1998 these activities were: - stray radiation monitoring, - radioactive waste management, - storage of radioactive items, - radioactive source control, - radioactive transport, - control of non-ionizing radiation, - thermoluminescence dosimetry, - radioactivity measurements. A summary of the activities during 1998 is presented in this part

CERN openlab enters fifth phase

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is a unique public-private partnership between CERN and leading ICT companies. At the start of this year, openlab officially entered its fifth phase, which will run until the end of 2017. For the first time in its history, it has extended beyond the CERN community to include other major European and international research laboratories.   Founded in 2001 to develop the innovative ICT systems needed to cope with the unprecedented computing challenges of the LHC, CERN openlab unites science and industry at the cutting edge of research and innovation. In a white paper published last year, CERN openlab set out the main ICT challenges it will tackle during its fifth phase, namely data acquisition, computing platforms, data storage architectures, computer management and provisioning, networks and connectivity, and data analytics. As it enters its fifth phase, CERN openlab is expanding to include other research laboratories. "Today, research centres in other disciplines are also st...

Celebrating 50 years of the CERN Computing Operations group

CERN Multimedia

Katarina Anthony

2013-01-01

Last week, former and current computing operations staff, managers and system engineers were reunited at CERN. They came together to celebrate a milestone not only for the IT Department but also for CERN: the 50th anniversary of the CERN Operations group and the 40th birthday of the Computer Centre.   The reunion was organised by former chief operator, Pierre Bénassi, and took place from 26 to 27 April. Among the 44 attendees were Neil Spoonley and Charles Symons, who together created the Operations group back in 1963. “At that time, working in the Operations group was a very physical job,” recalls former Operations Group Leader, David Underhill. “For that reason, many of the first operators were former firemen.” A few of the participants enjoyed a tour of CERN landmarks during their visit (see photo). The group toured the CERN Computing Centre (accompanied by IT Department Head, Frédéric Hemmer), as well as the ATLAS cav...

CERN firemen share their expertise

CERN Multimedia

Maximilien Brice

2002-01-01

Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. The CERN fire brigade has some unique training equipment for two particularly dangerous fire hazards, flashover and backdraft. Flashover occurs when a room that is on fire reaches a temperature of 400 to 500°. Beyond this point, a fully developed fire breaks out. This series of photos shows recruits from the fire services of Ain (Service Départemental Incendie et Secours (SDIS)) taking part in a flashover training exercise at CERN. Photo 01: Christopher Griggs, Chief Instructor of the CERN fire brigade (seated in the centre), explains the technique of using a fire-hose during a flashover to the recruits from the Ain SDIS.

Nobel prize-winner Heinrich Rohrer visits CERN

CERN Document Server

2008-01-01

The Nobel prize-winner Heinrich Rohrer met young scientists on a recent visit to the Laboratory. From left to right: Xavier Gréhant (CERN Openlab), Ewa Stanecka (ATLAS), Magda Kowalska (ISOLDE), Heinrich Rohrer, Stéphanie Beauceron (CMS) and Ana Gago Da Silva (UNOSAT).Heinrich Rohrer, who shared the 1986 Nobel prize for physics with Gerd Binnig for the design of the scanning tunnelling microscope, visited CERN on 25 June. Welcomed by the Director-General, Robert Aymar, he visited the ATLAS cavern and control room, the Computer Centre, the Unosat project, the Antimatter Decelerator and ISOLDE. At the end of his visit, he voiced his admiration for CERN and its personnel. As a renowned Nobel prize-winner Heinrich Rohrer has the opportunity to pass on his experience and enthusiasm to young scientists. During the evening meal, at which he met five young physicists and computer scientists, who were delighted with the chance to talk to him, he stressed the importance for re...

Cern

CERN Multimedia

2009-01-01

"La réparation de l'accélérateur géant de particules LHC, qui devrait redémarrer mi-novembre aprés une panne de plus d'un an, a coûté 23 millions d'euros, selon un haut responsable du Centre européen de recherche nucléaire (CERN), cité vendredi par les médias espagnols" (1 paragraph)

CERN and Portugal

International Nuclear Information System (INIS)

Anon.

1995-01-01

In its continual tour of CERN Member States, the European Committee for Future Accelerators (ECFA) visited Lisbon, Portugal, on 21-22 April, where it met at the Instituto Superiore Tecnico, a technical university with 9,000 students. Portuguese particle physics is in a particularly healthy situation, having developed considerably following Portugal's admission to CERN in 1985. With support from Brussels, scientific infrastructure has developed rapidly, although the science base has yet to attain the levels seen in larger nations. The 45-strong population of experimentalists in Portugal, including 14 PhDs, represents a 2.5-fold increase since Portugal joined CERN ten years ago and is in line with the goal stated at the time. This successful development of experimental particle physics has benefited much from physicists returning from abroad (mainly France and the UK). The direct result of the efforts of a few individuals (notably J.M. Gago), this splendid achievement provides an excellent role model for new and potential CERN Member States. At present, particle physics represents some 3 0% of all Portuguese physics publications. This very special role (and the financial support it implies) provides a visible target, but one which can be defended as it provides a catalyst for other national scientific developments. The national hub is the Laboratory for experimental high energy physics and related R&D projects (LIP), with centres in Lisbon (Head, J.M. Gago) and Coimbra (Head, A. Policarpo). LIP, with close links to two universities in Lisbon and to the University of Coimbra, has developed into a centre of expertise and training in electronics, computing and software engineering. Present LIP funding is some 2 million Swiss francs/year (70% in Lisbon and 3 0% in Coimbra), covering most of the salaries of the nonuniversity people, the remainder being supported by grants from Portuguese and European programmes. Portugal's contribution to CERN's 1995 budget

CERN and Israel

International Nuclear Information System (INIS)

Anon.

1995-01-01

Israel (along with the US, Japan, Canada, the Russian Federation and India) is one of the CERN non- Member State nations targeted for substantial future participation in CERN's experimental programme, in particular for the LHC proton collider to be built in the 27-kilometre LEP tunnel and which was formally approved by CERN Council in December (January/February, page 1). In keeping with their illustrious scientific traditions, Israeli experimental physicists have collaborated in experiments at many of the world's major high energy Laboratories - Brookhaven, Fermilab and SLAC in the US, and in Europe, DESY, Hamburg, as well as CERN. However CERN, as the geographically closest major Laboratory (as well as the largest), plays a special role for Israeli scientists. At CERN, the advent of preparations in the early 1980s for the experimental programme at the LEP electron-positron collider was the signal for Israeli researchers to mount a concerted effort and contribute to one of the experiments - Opal - at a level comparable to that of major nations. This allowed Israeli teams to participate fully in the planning and construction phase of this branch of Big Science. Underlining this commitment, and to coordinate the various national agencies involved in this aspect of Big Science, in 1983 the Israel Commission for High Energy Physics (ICHEP) was formed. It is currently chaired by David Horn of Tel Aviv. The initial ICHEP/CERN contract established the official CERN/lsrael link under which, in the short-term, teams from three major research centres - the Weizmann Institute, Tel- Aviv University, and Haifa's Technion - contributed to Opal, as the flagship experiment, while providing a framework for longer-term collaboration. (At CERN, Israeli physicists also participate in the NA45 heavy ion experiment and the NA47 Spin Muon Collaboration - SMC.) Opal groups some 320 scientists from 32 research centres in eight countries, and includes a 21-strong Israeli

Muse at CERN

CERN Multimedia

CERN Bulletin

2016-01-01

On 19 July, the world-famous, English rock band, Muse, visited CERN before taking centre-stage at Nyon’s Paléo Festival. They toured some of CERN’s installations, including the Synchrocyclotron and the Microcosm exhibition, and also looked in on CMS and the Antimatter Factory.    

CERN Proton Synchrotron Complex High-Level Controls Renovation

CERN Document Server

Deghaye, S; Garcia Quintas, D; Gourber-Pace, M; Kruk, G; Kulikova, O; Lezhebokov, V; Pasinelli, S; Peryt, M; Roderick, C; Roux, E; Sobczak, M; Steerenberg, R; Wozniak, J; Zaharieva, Z

2009-01-01

After a detailed study of the Proton Synchrotron (PS) complex requirements by experts of CERN controls & operation groups, a proposal to develop a new system, called Injector Controls Architecture (InCA), was presented to and accepted by the management late 2007. Aiming at the homogenisation of the control systems across CERN accelerators, InCA is based on components developed for the Large Hadron Collider (LHC) but also new components required to fulfil operation needs. In 2008, the project was in its elaboration phase and we successfully validated its architecture and critical use-cases during several machine development sessions. After description of the architecture put in place and the components used, this paper describes the planning approach taken combining iterative development phases with deployment in operation for validation sessions.

Italian singer Annalisa at CERN for a week of filming

CERN Multimedia

Stefania Pandolfi

2015-01-01

CERN welcomed Italian singer-songwriter Annalisa for a week-long visit to the Laboratory to shoot an Italian television production about the Laboratory.   Annalisa in the CERN Control Centre.   The Italian artist has a degree in physics from the University of Turin, Italy. She is a singer and songwriter, famous for her successful participation in the Italian talent show, Amici di Maria De Filippi. She has recorded four albums as solo artist and has participated twice in the Sanremo Music Festival, the most important Italian song contest. She has also received numerous Italian music awards, and has earned international recognition. Thanks to her knowledge of physics and her great influence with the Italian youth, Annalisa was selected to host an Italian television production about CERN aimed at young people. 

CERN

International Nuclear Information System (INIS)

Anon.

1988-01-01

Over the years the efforts at CERN to stimulate exchange of technological information with industry have steadily gained momentum. A 'Meeting on technology arising from high energy physics' was held in April 1974. Over 300 participants from industry, other research centres and universities heard three days of review talks on advanced technology and were able to see over 250 exhibits of equipment and the techniques emerging from the European particle physics programme

Rejuvenation of the controls of the CERN PS/ISOLDE facility using industrial components

CERN Document Server

Allard, J.; Locci, F.; Mornacchi, G.

2001-01-01

In the context of the general consolidation of the CERN ISOLDE facility, a project has been started to upgrade the ISOLDE control system. We describe the new ISOLDE control system, emphasizing the systematic use of industrial components such as PLCs and field buses, their integration with the existing, VME based, CERN PS control system and their potential applicability to both existing and new controls problems at the CERN PS complex. We also discuss how to extend a PLC-based solution to the case where real-time response is an issue.

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

CERN Document Server

Mario Batz

2002-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate CERN equipment services or contractors. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity covers the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, and buildings. These systems can either be part of the administrative infrastructure, such as offices or restaur...

CERN servers donated to Ghana

CERN Multimedia

CERN Bulletin

2012-01-01

Cutting-edge research requires a constantly high performance of the computing equipment. At the CERN Computing Centre, computers typically need to be replaced after about four years of use. However, while servers may be withdrawn from cutting-edge use, they are still good for other uses elsewhere. This week, 220 servers and 30 routers were donated to the Kwame Nkrumah University of Science and Technology (KNUST) in Ghana.   “KNUST will provide a good home for these computers. The university has also developed a plan for using them to develop scientific collaboration with CERN,” said John Ellis, a professor at King’s College London and a visiting professor in CERN’s Theory Group.  John Ellis was heavily involved in building the relationship with Ghana, which started in 2006 when a Ghanaian participated in the CERN openlab student programme. Since 2007 CERN has hosted Ghanaians especially from KNUST in the framework of the CERN Summer Student Progr...

CERN openlab enters new phase

CERN Multimedia

Katarina Anthony

2012-01-01

The newest phase of CERN’s openlab framework was inaugurated this week during a meeting of the openlab partners. This phase will last three years and will bring together existing openlab partners and a new contributor: Huawei.   Group picture taken at the first CERN openlab IV annual Board of Sponsors meeting, in the presence of the CERN Director-General, the partners and the openlab team members. © Fons Rademakers (CERN Photo Club). Eleven years ago, the creation of the CERN openlab created a long-term link between industrial partners and the Organization. Its framework has allowed industry to carry out large-scale IT research and development in an open atmosphere – an “Open Lab”, if you will. For CERN, openlab has contributed to giving the computing centre and, more broadly, the LHC community, the opportunity to ensure that the next generation of services and products is suitable to their needs. Now entering its fourth phase, openlab will ...

20 January 2011 - Hessischer Minister für Bundesangelegenheiten und Bevollmächtigter des Landes beim Bund, Hessen, Germany M. Boddenberg signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss; in the ALICE surafce exhibition and underground experimental area with P. Braun-Munzinger, V.Lindenstruth and Adviser R. Voss.

CERN Multimedia

Maximilien Brice

2011-01-01

Michael Boddenberg, Hessian Minister for Federal Affairs and Representative of Hessen in the Federal Government, visited CERN on 20 January. His tour included the ALICE experiment, the LHC tunnel, the CERN Computer Centre and CERN Control Centre.

New control architecture for the SPS accelerator at CERN

International Nuclear Information System (INIS)

Kissler, K.H.; Rausch, R.

1992-01-01

The Control System for the 450 Gev proton accelerator SPS at CERN was conceived and implemented some 18 years ago. The 16 Bit minicomputers with their proprietary operating system and interconnection with a dedicated network do not permit the use of modern workstations, international communication standards and industrial software packages. The upgrading of the system has therefore become necessary. After a short review of the history and the current state of the SPS control system, the paper describes how CERN's new control architecture, which will be common to all accelerators, will be realized at the SPS. The migration path ensuring a smooth transition to the final system is outlined. Once the SPS upgrade is complete and following some enhancements to the LEP control system, the operator in the SPS/LEP control center will be working in a single uniform control environment. (author)

Enhanced collaboration between CERN and India

CERN Multimedia

2009-01-01

On Monday 22 June, Bikash Sinha, Director of the SAHA Institute of Nuclear Physics (SINP) and the Variable Energy Cyclotron Centre (VECC) in Kolkata, India and Rolf Heuer, CERN Director-General, signed new protocols to the long standing agreement between the Indian Atomic Energy Commission and CERN. This provides a framework for collaboration in low energy nuclear physics between SAHA and VECC and the ISOLDE experiment at CERN. SINP and VECC Director Bikash Sinha and CERN Director-General Rolf Heuer signing the ISOLDE Protocols. SINP and VECC Director Bikash Sinha and CERN Research Director Sergio Bertolucci with representatives of the ISOLDE and RD51 Collaborations.INDIA has a long standing tradition in basic nuclear physics and nuclear chemistry. SINP is a leading institute for basic research and training in physical and biophysical sciences with particular competence in nuclear spectroscopy a...

CERN@school shoots for the stars

CERN Multimedia

Katarina Anthony

2011-01-01

CERN technology will be taking a stellar journey as the Langton Ultimate Cosmic ray Intensity Detector (LUCID) is launched into space in 2012. LUCID has been designed by students from the CERN@school programme using Timepix chips from the Medipix Collaboration at CERN.   CERN@school students present LUCID.  In today’s educational environment, a pioneering school physics programme that involves students in authentic research seems unlikely. But in the UK, the CERN@school programme is providing the resources for school students to do just that. “We develop projects which allow students to work alongside scientists and engineers before they go to university,” says Becky Parker, head of the Langton Star Centre and founder of the CERN@school programme. “Thanks to these programmes, students can make a genuine contribution to global scientific research. LUCID is the culmination of three years of efforts by the students.” Surrey Satellite Tech...

CERN, Accelerating Science (bilingual brochure)

CERN Multimedia

Kahle, Kate

2016-01-01

What is the Universe made of? Where did it come from, where is it going and why does it behave the way it does? These are some of the questions that CERN set out to address when a small number of pioneering scientists created Europe’s first scientific international organization. Founded in 1954, in the aftermath of the Second World War, CERN is not only a first-class centre for fundamental research but also a pioneering adventure in international collaboration.

Induced radioactivity at CERN

CERN Multimedia

1970-01-01

A description of some of the problems and some of the advantages associated with the phenomenon of induced radioactivity at accelerator centres such as CERN. The author has worked in this field for several years and has recently written a book 'Induced Radioactivity' published by North-Holland.

Discovery Mondays "Controlling the accelerators: tracking the protons"

CERN Multimedia

2007-01-01

Le Centre de contrôle des accélérateurs du CERN.Like a train of particles that picks up speed every time it passes a set of points, by the time they collide the protons and ions in the LHC will have followed their path through the six stages of the CERN accelerator complex, picking up speed at each stage. Operating the controls of this huge complex designed to accelerate the infinitesimally small are its peerless controllers. From the CERN Control Centre, they will be on duty day and night to accelerate the "wagon-loads" of particles, ensuring that they stay on track and lining them up for head-on collisions. At the next Discovery Monday you will discover the path taken by the particles through the accelerator chain. You will gain an insight into the complex work performed by those controlling the particles and learn more about the CERN accelerator complex and its Control Centre. Hop on board for a speed-of-light tour of the C...

CERN apprentice receives award

CERN Multimedia

2008-01-01

Another CERN apprentice has received an award for the quality of his work. Stéphane Küng (centre), at the UIG ceremony last November, presided over by Geneva State Councillor Pierre-François Unger, Head of the Department of Economics and Health. Electronics technician Stéphane Küng was honoured in November by the Social Foundation of the Union Industrielle Genevoise (UIG) as one of Geneva’s eight best apprentices in the field of mechatronics. The 20-year-old Genevan obtained his Federal apprentice’s certificate (Certificat fédéral de capacité - CFC) in June 2007, achieving excellent marks in his written tests at the Centre d’Enseignement Professionnel Technique et Artisanal (CEPTA). Like more than 200 youngsters before him, Stéphane Küng spent part of his four-year sandwich course working at CERN, where he followed many practical training courses and gained valuable hands-on experience in various technical groups and labs. "It’ always very gr...

CERN control centre (CCC) ou de la conception à l'exécution

CERN Document Server

Poehler, M

2005-01-01

Dès fin 2001, la section Design Office TS-CE est mandatée pour l’étude et la conception d’une nouvelle salle de contrôle des accélérateurs. Après de multiples variantes d’études et d’implantation, la direction CERN retient en début 2004, sur la base de facteurs économiques, le projet CCC, consistant en l’extension et le réaménagement de la PCR existante. Un Working Group TS Infrastructure est mis en place sous le pilotage TS-CE, avec pour objectifs de passer de la phase d’avant projet à la phase de projet définitif et d’étayer la faisabilité technique et économique de cette solution, dans le respect du cahier des charges des utilisateurs. Appuyé sur le rapport d’étude présenté à la direction CERN, cette dernière confirme son feu vert de lancement du projet dans les limites des coûts et des délais présentés. L’ouvrage et son infrastructure technique devant être livrés aux utilisat...

Installation of the CDC 7600 supercomputer system in the computer centre in 1972

CERN Multimedia

Nettz, William

1972-01-01

The CDC 7600 was installed in 1972 in the newly built computer centre. It was said to be the largest and most powerful computer system in Europe at that time and remained the fastest machine at CERN for 9 years. It was replaced after 12 years. Dr. Julian Blake (CERN), Dr. Tor Bloch (CERN), Erwin Gasser (Control Data Corporation), Jean-Marie LaPorte (Control Data Corporation), Peter McWilliam (Control Data Corporation), Hans Oeshlein (Control Data Corporation), and Peter Warn (Control Data Corporation) were heavily involved in this project and may appear on the pictures. William Nettz (who took the pictures) was in charge of the installation. Excerpt from CERN annual report 1972: 'Data handling and evaluation is becoming an increasingly important part of physics experiments. In order to meet these requirements a new central computer system, CDC 7600/6400, has been acquired and it was brought into more or less regular service during the year. Some initial hardware problems have disappeared but work has still to...

150 Bulgarian students visit CERN

CERN Multimedia

Alizée Dauvergne

2010-01-01

Between 27 March and 8 April 2010, 150 Bulgarian students from the Astronomical Observatory in Varna visited CERN as part of the “From Galileo to CERN” programme. Bulgarian students participating in the "From Galileo to CERN" educational programme. “It’s interesting to combine astronomy and particle physics”, explains Svejina Dimitrova, organiser of the programme and Director of Varna Astronomical Observatory. The three groups, each one comprising 50 students, first visited Pisa, Padua and other places in Italy  related to Galileo’s life. “Thanks to the visit, students understood telescopes and why Galileo is such an important scientist”, says Svejina. After Italy, they came to CERN for three days and visited several sites: Linac, the Computer Centre CCC, etc. Another group of Bulgarian students in their visit to CERN. “They became aware that particle physics is not only the...

29 August 2013 - Director Variable Energy Cyclotron Centre, India D. Srivastava signing the guest book with CERN Director-General R. Heuer. Coordinator of India-ALICE Collaboration T. Nayak present throughout.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

29 August 2013 - Director Variable Energy Cyclotron Centre, India D. Srivastava signing the guest book with CERN Director-General R. Heuer. Coordinator of India-ALICE Collaboration T. Nayak present throughout.

Collaborative tools and videoconferencing at CERN

CERN Multimedia

2008-01-01

Are you wondering about the intricacies of using videoconferencing and other collaborative tools at CERN? Our two new courses might just be the answer! In April 2008 the venerable VRVS service was shut down and replaced by EVO. EVO is a Java-based, cross-platform collaborative tool which allows you to hold meetings from your office or from a CERN video conference room. Because of ever-increasing usage of EVO at CERN, IT-UDS-AVC is organizing an introductory EVO course entitled "A hands-on overview of EVO", which will cover the basic usage of EVO (hardware recommendations; booking meetings; joining an EVO meeting from a CERN conference room/office/phone; moderating meetings). This course will be held as a hands-on session in the training centre, and mainly targets meeting conveners and users who want to join meetings from their office. We also organize a course entitled "Videoconferencing and collaborative tools at CERN", which is a general introduction to the videoconferenc...

People and things. CERN Courier, Oct 1988, v. 28(8)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1988-10-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With $11 million in pre-construction funds for the proposed KAON Factory, a major reorganization took place at the Canadian TRIUMF laboratory in Vancouver on September 1. A EULIMA (European Light Ion Medical Accelerator) workshop on the potential value of light ion beam therapy will be held at the Centre Anthoine-Lacassagne, Nice, France, from 3-5 November. As a tribute to Viktor Weisskopf on his 80th birthday, an international colloquium 'Science, Culture and Peace' was organized by CERN and by the 'Ettore Majorana' Centre for Scientific Culture, Erice, Sicily, at CERN on 19 and 20 September. An advanced accelerator physics course, organized jointly by the CERN Accelerator School and Uppsala University, Sweden, and placing special emphasis on the problems of small rings, will be held from 18-29 September in Uppsala.

People and things. CERN Courier, Oct 1988, v. 28(8)

International Nuclear Information System (INIS)

Anon.

1988-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With $11 million in pre-construction funds for the proposed KAON Factory, a major reorganization took place at the Canadian TRIUMF laboratory in Vancouver on September 1. A EULIMA (European Light Ion Medical Accelerator) workshop on the potential value of light ion beam therapy will be held at the Centre Anthoine-Lacassagne, Nice, France, from 3-5 November. As a tribute to Viktor Weisskopf on his 80th birthday, an international colloquium 'Science, Culture and Peace' was organized by CERN and by the 'Ettore Majorana' Centre for Scientific Culture, Erice, Sicily, at CERN on 19 and 20 September. An advanced accelerator physics course, organized jointly by the CERN Accelerator School and Uppsala University, Sweden, and placing special emphasis on the problems of small rings, will be held from 18-29 September in Uppsala

Bulgarian folk dances at CERN

CERN Multimedia

Roberto Cantoni

2010-01-01

On Sunday 29 August, the Bulgarian folklore dance group Rhythm visited CERN. After their visit to the ATLAS visitor centre and the SM18 hall, they performed a show in the Pump Room, introducing CERN people to the musical traditions of their country.   The visit of the Bulgarian dance group was organized by Zornitsa Zaharieva, a member of the Beams Department, and Svejina Dimitrova, Director of the Varna Astronomical Observatory. “The students were enthusiastic about the opportunity to visit CERN”, says Zornitsa. “The idea of the performance came from the dance group itself, who wanted to express their gratitude for being given this chance”. The group, comprising around 25 children aged between 11 and 16 from the city of Varna, was hosted by the CERN Dancing Club. For their show, the young dancers, choreographed by Tashka Pavlova, performed traditional dances and songs from different Bulgarian regions. “As a member of the CERN Dancing Club com...

HELEN brings Latin Americans to CERN

CERN Multimedia

Maximiliem Brice

2006-01-01

Latin American students who have arrived at CERN to take up fellowships during the first months of 2006 relax in front of the LHC collaboration buildings, together with the deputy coordinator of HELEN, Veronica Riquer (centre), from Rome University and INFN. The training programme supported by the High Energy Physics Latin American- European Network (HELEN) is in full swing. For 2006, the programme has assigned about 70 fellowships to be spent at CERN by Latin American students and young physicists.

L’apprentissage au CERN

CERN Multimedia

Staff Association

2016-01-01

En 1961, sur la base du constat que l’évolution du marché du travail nécessitait un besoin croissant de personnel qualifié, le 1er accord entre la République et canton de Genève et le CERN fut signé. Cet accord avait notamment pour objet la formation professionnelle de jeunes électroniciens et techniciens de laboratoires en physique. Le CERN, acteur local économique d’importance, soulignait par cet accord sa volonté de participer au développement économique et social local. Le 1er apprenti arriva au CERN en 1965. En 1971, le centre d’apprentissage fut créé ; il accueille aujourd’hui plus d’une vingtaine d’apprentis au total, à raison d’environ six nouveaux apprentis chaque année. Cet apprentissage est dédié aux jeunes âgés e...

Ian Bird, head of Grid development at CERN

CERN Multimedia

Patrice Loïez

2003-01-01

"The Grid enables us to harness the power of scientific computing centres wherever they may be to provide the most powerful computing resource the world has to offer," said Ian Bird, head of Grid development at CERN. The Grid is a new method of sharing processing power between computers in centres around the world.

23rd September 2010 - German Staatssekretär im Bundesministerium für Bildung und Forschung G. Schütte with CERN Finance Committee Member S.C. Langer-Greipl, accompanied by Adviser R. Voss in front of the ATLAS visitor Centre at Point 1.

CERN Multimedia

Jean-Claude Gadmer

2010-01-01

CERN-HI-1009227 02-11: visiting SM18 wiht R. Schmidt, Technology Department; CERN-HI-1009227 12-20: in the ATLAS visitor centre with Collaboration Spokesperson F. Gianotti and Director-General R. Heuer; CERN-HI-1009227 21-31: meeting with a selection of the German community

Les outils du CERN

CERN Multimedia

1999-01-01

C'est le plus grand centre mondial de recherche en physique des particules. Les outils du Laboratoire, accélérateurs et détecteurs de particules, figurent parmi les instruments scientifiques les plus complexes au monde. Des prix Nobels ont d'ailleurs été attribués aux physiciens du CERN pour leurs développements.

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRALSERVICE FOR EVERYONE

CERN Multimedia

Mario Batz / TCR Responsible

2001-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

27 February 2012 - Director of the Health Directorate at the Research DG European Commission R. Draghia-Akli in the ATLAS visitor centre with ATLAS Former Collaboration Spokesperson P. Jenni and Head of CERN EU Projects Office S. Stavrev; in the LHC superconducting magnet test hall with E. Todesco; and signing the guest book with CERN Director-General R. Heuer.

CERN Multimedia

Michel Blanc

2012-01-01

27 February 2012 - Director of the Health Directorate at the Research DG European Commission R. Draghia-Akli in the ATLAS visitor centre with ATLAS Former Collaboration Spokesperson P. Jenni and Head of CERN EU Projects Office S. Stavrev; in the LHC superconducting magnet test hall with E. Todesco; and signing the guest book with CERN Director-General R. Heuer.

CERN exhibition attracts over 100,000 visitors in Belgrade

CERN Multimedia

Antonella Del Rosso

2012-01-01

“This must be an 'all-time record',” says Ray Lewis, CERN travelling exhibition manager. “In all my time with the various permanent and travelling exhibitions that have taken place locally and within our Member States I have never experienced such figures.”   Zarko Obradovic (left), Serbian Minister of Education, Science and Technology, and Rolf Heuer (right), CERN Director-General, at the CERN travelling exhibition in Belgrade. Indeed, in approximately 20 days of exhibition time about 120,000 people, mainly school visiters and the general public, visited the 100 m2 CERN mini-exhibition. It was set up in the centre of Belgrade in October, in association with the meeting of the Restricted European Committee for Future Accelerators (RECFA). After attending the RECFA meeting, CERN's Director-General Rofl Heuer opened the CERN exhibition on the evening of 19 October. Lectures about CERN were held every afternoon, and two public de...

CERN students display their work

CERN Multimedia

Anaïs Schaeffer

2011-01-01

The first poster session by students working on the LHC experiments, organised by the LPCC, was a great success. Showcasing the talents of over a hundred young physicists from all over the world, it was an opportunity for everyone at CERN to check out the wide range of research work being done by the new generation of physicists at CERN.   At 5.30 p.m. on Wednesday 23 March, the first poster session by CERN students took place in Restaurant No.1, where no fewer than 87 posters went on public display. The students were split into 8 groups according to their research field* and all were on hand to answer the questions of an inquisitive audience. TH Department's Michelangelo Mangano, who is head of the LHC Physics Centre at CERN (LPCC) and is responsible for the initiative, confirms that nothing was left to chance, even the choice of date: "We wanted to make the most of the general enthusiasm around the winter conferences and the meeting of the LHC Experiments Committee to present the stud...

29th November 2011 - Czech Parliament Members of the Social Committee of the Lower Chamber visiting CERN permanent exhibition Microcosm and ATLAS visitor centre with Senior Czech Physicist and ILO I. Lehraus.

CERN Multimedia

Jean-Claude Gadmer

2011-01-01

29th November 2011 - Czech Parliament Members of the Social Committee of the Lower Chamber visiting CERN permanent exhibition Microcosm and ATLAS visitor centre with Senior Czech Physicist and ILO I. Lehraus.

CERN 60 years of science for peace

CERN Multimedia

Fabienne, Marcastel

2014-01-01

What is the Universe made of? Where did it come from, where is it going and why does it behave the way it does? These are some of the questions that CERN set out to address 60 years ago when a small number of pioneering scientists created Europe’s first scientific international organization. Founded in the aftermath of the second world war, CERN is not only a first-class centre for fundamental research but also a pioneering adventure in international collaboration.

Common control system for the CERN accelerators

International Nuclear Information System (INIS)

Rausch, R.; Serre, Ch.

1992-01-01

The PS and SPS Accelerator Control Systems are becoming obsolete and need urgent rejuvenation. After a control users forum, where users expressed their needs, two main Working Groups were set up, consisting of Control and Equipment Specialists and experienced Machine Operators. One Working Group studied the architecture and the front-end processing and the other a common approach to the application software needed to run the CERN accelerator complex. The paper presents the technical conclusion of their work and the policy to implement it, taking into account the necessity to operate both machines without interruption of the Physics Program. (author)

Doors are opening at children’s day-care centre at Champs-Fréchets

CERN Multimedia

HR Department

2008-01-01

Opened in August 2008, this new centre offers day-care for children between the ages of 4 months and 4 years. Following an agreement with CERN, up to 20 places are reserved for members of the CERN personnel. The commune of Meyrin invites interested parents to come and visit the centre on Saturday 11 October 2008 from 10 a.m. to 4 p.m. Address : 69, rue des Lattes -1217 Meyrin Further information on the agreement with CERN: https://cern.ch/hr-services/Ben/Social/EVE.asp

Sharing scientific discovery globally: toward a CERN virtual visit service

Science.gov (United States)

Goldfarb, S.; Hatzifotiadou, D.; Lapka, M.; Papanestis, A.

2017-10-01

The installation of virtual visit services by the LHC collaborations began shortly after the first high-energy collisions were provided by the CERN accelerator in 2010. The experiments: ATLAS [1], CMS [2], LHCb [3], and ALICE [4] have all joined in this popular and effective method to bring the excitement of scientific exploration and discovery into classrooms and other public venues around the world. Their programmes, which use a combination of video conference, webcast, and video recording to communicate with remote audiences have already reached tens of thousands of viewers, and the demand only continues to grow. Other venues, such as the CERN Control Centre, are also considering similar permanent installations. We present a summary of the development of the various systems in use around CERN today, including the technology deployed and a variety of use cases. We then lay down the arguments for the creation of a CERN-wide service that would support these programmes in a more coherent and effective manner. Potential services include a central booking system and operational management similar to what is currently provided for the common CERN video conference facilities. Certain choices in technology could be made to support programmes based on popular tools including (but not limited to) Skype™ [5], Google Hangouts [6], Facebook Live [7], and Periscope [8]. Successful implementation of the project, which relies on close partnership between the experiments, CERN IT CDA [9], and CERN IR ECO [10], has the potential to reach an even larger, global audience, more effectively than ever before.

People and things. CERN Courier, Nov 1987, v. 27(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1987-11-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The 1988 CERN School of Physics will be organized jointly by the Nuclear Research Centre 'Demokritos', Athens and CERN. Its basic aim is to teach various aspects of high energy physics, but especially theoretical physics, to young experimental physicists, mainly from the Member States of CERN. It will be held in Lefkada, Greece, from 18 September to 1 October 1988. The first and highly successful Asia-Pacific Workshop on High Energy Physics, devoted to Superstrings, Anomalies and Field Theory, was held in Singapore this summer.

Process computers automate CERN power supply installations

International Nuclear Information System (INIS)

Ullrich, H.; Martin, A.

1974-01-01

Higher standards of performance and reliability in the power plants of large particle accelerators necessitate increasing use of automation. The CERN (European Nuclear Research Centre) in Geneva started to employ process computers for plant automation at an early stage in its history. The great complexity and extent of the plants for high-energy physics first led to the setting-up of decentralized automatic systems which are now being increasingly combined into one interconnected automation system. One of these automatic systems controls and monitors the extensive power supply installations for the main ring magnets in the experimental zones. (orig.) [de

A rugby tournament for CERN's 50th anniversary

CERN Multimedia

2004-01-01

On 4 April the rugby pitch at the Meyrin sports centre will be the venue for the Swiss Rugby Schools' tournament, organised by the CERN-Meyrin-St Genis Rugby Club. The organisers will be unmistakable, kitted out in CERN Staff Association t-shirts specially dedicated to the CERN clubs for the Organization's 50th anniversary. Come along and cheer on the 250 players from Switzerland and neighbouring France, aged from 6 to 18, who will do battle on the rugby field over the course of 50 matches from 11.00 a.m. to 3.30 p.m. At the end of the tournament, the winners will be presented with 50th anniversary memorabilia by the Mayor and a CERN representative who will say a few words about the Laboratory.

Le CERN: centre du monde, centre de l'univers... Une chance pour Genève!

CERN Multimedia

Tesnier, Grégory

From Asia, Europa, America, Oceania, Africa, the curious have see the images or read the story of the startup of the Great Hadron Collider (LHC), new giant experiment launched last week by CERN. (1 page)

CANDU 9 Control Centre Mockup

International Nuclear Information System (INIS)

Webster, A.; Macbeth, M.J.

1996-01-01

This paper provides a summary of the design process being followed, the benefits of applying a systematic design using human factors engineering, presents an overview of the CANDU 9 control centre mockup facility, illustrates the control centre mockup with photographs of the 3D CADD model and the full scale mockup, and provides an update on the current status of the project. (author)

Software factory techniques applied to process control at CERN

OpenAIRE

Dutour, Mathias D

2007-01-01

The CERN Large Hadron Collider (LHC) requires constant monitoring and control of quantities of parameters to guarantee operational conditions. For this purpose, a methodology called UNICOS (UNIfied Industrial COntrols Systems) has been implemented to standardize the design of process control applications. To further accelerate the development of these applications, we migrated our existing UNICOS tooling suite toward a software factory in charge of assembling project, domain and technical inf...

Epoxy adhesive plays crucial role at CERN

CERN Multimedia

2006-01-01

"Epoxy adhesives are set to play a vital role in Europe's biggest-ever scientific experiment at the European Centre for Nuclear Research (CERN) in Geneva, Switzerland, thereby helping scientists gain a better understanding of the origins of the universe." (1 page)

Welcome to the CERN OPENDAYS: Our Universe is Yours

CERN Multimedia

2013-01-01

CERN is one of the world’s largest and most respected centres for scientific research. Its business is fundamental physics: finding out what the Universe is made of and how it works. At CERN, large and highly complex scientific instruments are used to study the basic constituents of matter: the fundamental particles. By studying what happens when these particles collide, physicists further our understanding of the laws of Nature

EU Commissioner for Research, Science and Innovation visits CERN

CERN Multimedia

Svetlomir Stavrev

2015-01-01

The EU Commissioner for Research, Science and Innovation, Carlos Moedas, visited CERN on 30 January 2015. He was invited by the Director-General to obtain a first-hand impression of some of the world's largest and most complex scientific instruments, just before the eagerly awaited restart of the LHC at record energies.   EU Commissioner Carlos Moedas (first row, fourth from right), accompanied by members of CERN management and researchers involved in the CESSAMag project. The Commissioner was informed about the missions and various activities of CERN, including knowledge transfer and technologies for medical applications. He visited CMS, some of the magnets developed by CERN for SESAME in the framework of the EU co-funded CESSAMag project, and the IT Computing Centre.  The Commissioner encouraged CERN to engage in a European Science Cloud Pilot that could be built on top of existing and highly successful distributed computing initiatives, in some of which CERN played a fu...

Change of public transport services for CERN

CERN Multimedia

From 9 December onwards, the Number 9 bus, which used to run from Petit-Bel-Air all the way through to CERN, will terminate at Cornavin. With the first stretch of the new Cornavin-Meyrin-CERN tram route now in service, trams 14 and 16 will run from Cornavin to Avanchet (next to the Balexert shopping centre). During construction of the section through to Meyrin and CERN, two new bus services will be available from Avanchet, the 55 to Meyrin Village and the 56 to CERN. The Y bus route has been modified between Blandonnet and the Hôpital de la Tour: buses will no longer transit via Meyrin-Village but via the Meyrin-Satigny business park. The Y bus route has also been extended from Blandonnet to Avanchet so as to establish a connection with the tram routes 14 and 16. To get to CERN from Cornavin station during this period, you should therefore take a number 14 or 16 tram and then a number 56 bus. For further information: www.tpg.ch

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

CERN Multimedia

Mario Batz / TCR Responsible

2000-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number 72201. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the tec...

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

CERN Document Server

Mario Batz

2002-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

CERN Multimedia

Mario Batz (TCR Responsible)

2001-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

CERN's Technical Control Room (TCR) A Central Service for Everyone

CERN Document Server

Mario Batz

2001-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

CERN Multimedia

Mario Batz (TCR Responsible)

2001-01-01

The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number 72201. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the tec...

Cornavin station to CERN non-stop in 20 minutes

CERN Multimedia

Laëtitia Pedroso

2011-01-01

Following several years of work, the construction of the Jardin Alpin – CERN tramline is almost complete, and the first tram is due to arrive at CERN on 30 April. Celebrations to mark the occasion will be held in Meyrin-Village and at CERN.   First tests of the overhead lines, signals, and tracks on the stretch between Jardin-Alpin and CERN on 7 April 2011. From 30 April onwards you will be able to travel from Cornavin station to CERN non-stop in 20 minutes using the No. 18 tram. This is great news, especially when you think that, only four years ago, no part of the stretch between Cornavin and CERN was served by a tramline. At present, if you want to travel between CERN and the city centre by public transport, you have to take the No. 14 or the No. 16 tram and the No. 56 bus, changing at Meyrin-Gravière, where you sometimes have quite a long wait. On 30 April all this will be a thing of the past! The construction work for the Geneva-CERN tramline began in January 20...

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop Web 2.0 websites. Through a series of lectures and practical examples you will learn the power of the JavaScript XML Http request object and how it can be used to add advanced interactivity to your website. This course gives an overview of the main AJAX frameworks and Web 2.0 techniques. The course will take place, in English, from 28 to 30 June 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - “CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3” is a 3 day course. In this course, you will learn how to create board-level schematic designs with Design Entry HDL. You will explore the integration between Design Entry HDL and other tools in the design flow, including the A...

People and things. CERN Courier, Nov 1987, v. 27(9)

International Nuclear Information System (INIS)

Anon.

1987-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The 1988 CERN School of Physics will be organized jointly by the Nuclear Research Centre 'Demokritos', Athens and CERN. Its basic aim is to teach various aspects of high energy physics, but especially theoretical physics, to young experimental physicists, mainly from the Member States of CERN. It will be held in Lefkada, Greece, from 18 September to 1 October 1988. The first and highly successful Asia-Pacific Workshop on High Energy Physics, devoted to Superstrings, Anomalies and Field Theory, was held in Singapore this summer

A campus-wide Wi-Fi service for CERN

CERN Multimedia

2016-01-01

Improvements are coming to CERN’s Wi-Fi service as connectivity is improved in offices, restaurants and meeting rooms.   All Wi-Fi traffic will be routed via central controllers in CERN’s Computer Centre to provide a better managed service. (Image: Veronika McQuade/CERN) The IT department’s Communication Systems group has provided Wi-Fi connectivity at CERN for many years now but with a focus on meeting rooms, auditoriums and informal meeting places such as the restaurants. Although some buildings have Wi-Fi coverage in offices, most do not and CERN’s Wi-Fi service is lagging behind the demand driven by the growing number of tablets, lightweight laptops and other wireless-only devices. Furthermore, the current network infrastructure can’t cope with the many devices in the Main Auditorium during events such as the recent LIGO announcement and it often has difficulty handling the demand at Restaurant 1 during lunchtimes. The wireless access points d...

Control protocol: the proposed new CERN standard access procedure to accelerator equipment

International Nuclear Information System (INIS)

Baribaud, G.; Barnett, I.; Benincasa, G.

1992-01-01

Control protocol provides a normalized access procedure for equipment of the same kind from a control system. Modelisation and the subsequent identification of functionalities with their parameters, variables and attributes have now been carried out at CERN for representative families of devices. ISO specifications, such as the ASN.1 metalanguage for data structure representation and MMS definitions and services have, to some extent, been introduced in the design for generality and compatibility with external world. The final product of this design is totally independent of the control systems and permits object oriented implementations in any controls frame. The present paper describes the different phases of the project with a short overview of the various implementations under development at CERN. (author)

Le CERN ouvre ses entrailles au public

CERN Multimedia

2004-01-01

"Le CERN se lance dans une grande opération de relations publiques pour son cinquantième anniversaire. Le centre de recherche organisera une journée portes ouvertes le 16 octobre. Quelque 50 sites pourrant être visités" (1/2 page)

CERN MicroClub

CERN Multimedia

CERN MicroClub

2016-01-01

Le CERN Micro Club (en partenariat avec Google Education et EU Code Week) organise un évènement éducatif exceptionnel autour de trois kits scientifiques basés sur le mini-ordinateur Raspberry Pi : Le Bras Robotique "Poppy Ergo Jr", conçu par l'équipe-projet Flowers (Centre de recherche Inria Bordeaux Sud-Ouest, ENSTA Paris Tech). Le kit de détection de rayons cosmiques "Muon Hunter", conçu en partenariat entre Mr Mihaly Vadai et les membres du CERN Micro Club. La voiture radio-commandée programmable Wifi "GianoPi", conçue en partenariat avec le campus "La Chataigneraie", pour l'Ecole Internationale de Genève.   Le vendredi 7 octobre (de 18h à 20h) : Une conférence gratuite et ouverte à tous (limitée à 100 personnes), pendant laquelle v...

29 January 2013 - Japanese Toshiba Corporation Executive Officer and Corporate Senior Vice President O. Maekawa in the ATLAS visitor centre with representatives of the CERN-Japanese community led by Former Collaboration Spokesperson P. Jenni.

CERN Multimedia

Maximilien Brice

2013-01-01

29 January 2013 - Japanese Toshiba Corporation Executive Officer and Corporate Senior Vice President O. Maekawa in the ATLAS visitor centre with representatives of the CERN-Japanese community led by Former Collaboration Spokesperson P. Jenni.

CERN rupture des négociations

CERN Multimedia

1990-01-01

"Le Comité du Conseil du Centre européen de recherches nucléaires (CERN) a déchiré jeudi le paquet de mesures négociées pendant l'été par le personnel avec la direction. Les négociations directes sur les conditions d'emploi "n'étaient qu'un faux-semblant", a déclaré vendredi l'Association du personnel du CERN, qui demande la démission immédiate du président du Conseil et du directeur général et prévoit une grève du zèle" (0.5 page)

Italian students win a trip to CERN

CERN Multimedia

2006-01-01

The six winners of the Progetto Lauree Scientifiche came to CERN to discover the LHC experiments. Six Italian high-school students visited CERN last week as part of a biennial project sponsored by the Italian Research ministry, the University of Ferrara and INFN. A total of 160 enthusiastic students took part in the project, which aims to introduce and foster interest in higher levels of science and technology. The Progetto Lauree Scientifiche prize was awarded to these students for their excellent grades in an examination covering various areas of physics, including laser, solid and particle physics. The winners spent six days at CERN touring the Laboratory and seeing first-hand the various aspects of research in one of the leading European centres, as well as the excitement of the particle physics adventure.

EOS as the present and future solution for data storage at CERN

CERN Document Server

Peters, AJ; Adde, G

2015-01-01

EOS is an open source distributed disk storage system in production since 2011 at CERN. Development focus has been on low-latency analysis use cases for LHC(1) and non- LHC experiments and life-cycle management using JBOD(2) hardware for multi PB storage installations. The EOS design implies a split of hot and cold storage and introduced a change of the traditional HSM(3) functionality based workflows at CERN.The 2015 deployment brings storage at CERN to a new scale and foresees to breach 100 PB of disk storage in a distributed environment using tens of thousands of (heterogeneous) hard drives. EOS has brought to CERN major improvements compared to past storage solutions by allowing quick changes in the quality of service of the storage pools. This allows the data centre to quickly meet the changing performance and reliability requirements of the LHC experiments with minimal data movements and dynamic reconfiguration. For example, the software stack has met the specific needs of the dual computing centre set-...

Ferox is awarded another contract by CERN

CERN Multimedia

2002-01-01

Ferox, manufacturer of equipment for the chemical industry, has been awarded a second contract by the physical research centre CERN (Switzerland). The contract regards the delivery of 10 pcs of stainless containers for liquid nitrogen and argon with a capacity of 50 cu mt (1 paragraph).

Faisceau d'essai de la NASA au CERN

CERN Multimedia

1999-01-01

An international team coordinated by the Goddard Space Centre, has just finished a series of test beams at SPS, CERN. The experiments were part of the ACCESS experiment, which will eventually monitor cosmic rays from the international space station (1 paragraph).

Chinese physicists and the CERN group invited to visit China in September 1975

CERN Multimedia

CERN PhotoLab

1975-01-01

At the National Peoples Congress Palace in Peking, Wu Lein-Fu (centre) between W. Weisskopf and W. Jentschke. Second from left Mrs Weisskopf. At the back (centre) L. Van Hove, Mrs Van Hove, G. Charpak. See CERN Courier of October 1975.

Automatic processing of CERN video, audio and photo archives

International Nuclear Information System (INIS)

Kwiatek, M

2008-01-01

The digitalization of CERN audio-visual archives, a major task currently in progress, will generate over 40 TB of video, audio and photo files. Storing these files is one issue, but a far more important challenge is to provide long-time coherence of the archive and to make these files available on-line with minimum manpower investment. An infrastructure, based on standard CERN services, has been implemented, whereby master files, stored in the CERN Distributed File System (DFS), are discovered and scheduled for encoding into lightweight web formats based on predefined profiles. Changes in master files, conversion profiles or in the metadata database (read from CDS, the CERN Document Server) are automatically detected and the media re-encoded whenever necessary. The encoding processes are run on virtual servers provided on-demand by the CERN Server Self Service Centre, so that new servers can be easily configured to adapt to higher load. Finally, the generated files are made available from the CERN standard web servers with streaming implemented using Windows Media Services

Automatic processing of CERN video, audio and photo archives

Energy Technology Data Exchange (ETDEWEB)

Kwiatek, M [CERN, Geneva (Switzerland)], E-mail: Michal.Kwiatek@cem.ch

2008-07-15

The digitalization of CERN audio-visual archives, a major task currently in progress, will generate over 40 TB of video, audio and photo files. Storing these files is one issue, but a far more important challenge is to provide long-time coherence of the archive and to make these files available on-line with minimum manpower investment. An infrastructure, based on standard CERN services, has been implemented, whereby master files, stored in the CERN Distributed File System (DFS), are discovered and scheduled for encoding into lightweight web formats based on predefined profiles. Changes in master files, conversion profiles or in the metadata database (read from CDS, the CERN Document Server) are automatically detected and the media re-encoded whenever necessary. The encoding processes are run on virtual servers provided on-demand by the CERN Server Self Service Centre, so that new servers can be easily configured to adapt to higher load. Finally, the generated files are made available from the CERN standard web servers with streaming implemented using Windows Media Services.

Signature of two CERN/ISTC contracts

CERN Document Server

Patrice Loïez

2000-01-01

Photo 08; l. to r. Mr L. Maiani, Director General of CERN, Mr A. Gérard, Director of the International Science and Technology Centre (ISTC), Moscow, Mr B. Dolgoshein, Vice Rector of MEPhi (Moscow Engineering and Physics Institute), B.Onykiy, Rector of MEPhi,Moscow Photo 02; Mr L. Maiani and Mr A. Gérard

CERN's Guardian Angels

CERN Multimedia

2002-01-01

Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

Commissioning results of CERN HIE-ISOLDE and INFN ALPI cryogenic control systems

Science.gov (United States)

Inglese, V.; Pezzetti, M.; Calore, A.; Modanese, P.; Pengo, R.

2017-02-01

The cryogenic systems of both accelerators, namely HIE ISOLDE (High Intensity and Energy Isotope Separator On Line DEvice) at CERN and ALPI (Acceleratore Lineare Per Ioni) at LNL, have been refurbished. HIE ISOLDE is a major upgrade of the existing ISOLDE facilities, which required the construction of a superconducting linear accelerator consisting of six cryomodules, each containing five superconductive RF cavities and superconducting solenoids. The ALPI linear accelerator, similar to HIE ISOLDE, is located at Legnaro National Laboratories (LNL) and became operational in the early 90’s. It is composed of 74 superconducting RF cavities, assembled inside 22 cryostats. The new control systems are equipped with PLC, developed on the CERN UNICOS framework, which include Schneider and Siemens PLCs and various fieldbuses (Profibus DP and PA, WorldFIP). The control systems were developed in synergy between CERN and LNL in order to build, effectively and with an optimized use of resources, control systems allowing to enhance ease of operation, maintainability, and long-term availability. This paper describes (i) the cryogenic systems, with special focus on the design of the control systems hardware and software, (ii) the strategy adopted in order to achieve a synergic approach, and (iii) the commissioning results after the cool-down to 4.5 K of the cryomodules.

Update on the CERN Computing and Network Infrastructure for Controls (CNIC)

CERN Multimedia

Lueders, S

2007-01-01

Over the last few years modern accelerator and experiment control systems have increasingly been based on commercial-off-the-shelf products (VME crates, PLCs, SCADA systems, etc.), on Windows or Linux PCs, and on communication infrastructures using Ethernet and TCP/IP. Despite the benefits coming with this (r)evolution, new vulnerabilities are inherited too: Worms and viruses spread within seconds via the Ethernet cable, and attackers are becoming interested in control systems. Unfortunately, control PCs cannot be patched as fast as office PCs. Even worse, vulnerability scans at CERN using standard IT tools have shown that commercial automation systems lack fundamental security precautions: Some systems crashed during the scan, others could easily be stopped or their process data be altered. During the two years following the presentation of the CNIC Security Policy at ICALEPCS2005, a "Defense-in-Depth" approach has been applied to protect CERN's control systems. This presentation will give a review of its th...

Experience building and operating the CMS Tier-1 computing centres

Science.gov (United States)

Albert, M.; Bakken, J.; Bonacorsi, D.; Brew, C.; Charlot, C.; Huang, Chih-Hao; Colling, D.; Dumitrescu, C.; Fagan, D.; Fassi, F.; Fisk, I.; Flix, J.; Giacchetti, L.; Gomez-Ceballos, G.; Gowdy, S.; Grandi, C.; Gutsche, O.; Hahn, K.; Holzman, B.; Jackson, J.; Kreuzer, P.; Kuo, C. M.; Mason, D.; Pukhaeva, N.; Qin, G.; Quast, G.; Rossman, P.; Sartirana, A.; Scheurer, A.; Schott, G.; Shih, J.; Tader, P.; Thompson, R.; Tiradani, A.; Trunov, A.

2010-04-01

The CMS Collaboration relies on 7 globally distributed Tier-1 computing centres located at large universities and national laboratories for a second custodial copy of the CMS RAW data and primary copy of the simulated data, data serving capacity to Tier-2 centres for analysis, and the bulk of the reprocessing and event selection capacity in the experiment. The Tier-1 sites have a challenging role in CMS because they are expected to ingest and archive data from both CERN and regional Tier-2 centres, while they export data to a global mesh of Tier-2s at rates comparable to the raw export data rate from CERN. The combined capacity of the Tier-1 centres is more than twice the resources located at CERN and efficiently utilizing this large distributed resources represents a challenge. In this article we will discuss the experience building, operating, and utilizing the CMS Tier-1 computing centres. We will summarize the facility challenges at the Tier-1s including the stable operations of CMS services, the ability to scale to large numbers of processing requests and large volumes of data, and the ability to provide custodial storage and high performance data serving. We will also present the operations experience utilizing the distributed Tier-1 centres from a distance: transferring data, submitting data serving requests, and submitting batch processing requests.

Experience building and operating the CMS Tier-1 computing centres

International Nuclear Information System (INIS)

Albert, M; Bakken, J; Huang, Chih-Hao; Dumitrescu, C; Fagan, D; Fisk, I; Giacchetti, L; Gutsche, O; Holzman, B; Bonacorsi, D; Grandi, C; Brew, C; Jackson, J; Charlot, C; Colling, D; Fassi, F; Flix, J; Gomez-Ceballos, G; Hahn, K; Gowdy, S

2010-01-01

The CMS Collaboration relies on 7 globally distributed Tier-1 computing centres located at large universities and national laboratories for a second custodial copy of the CMS RAW data and primary copy of the simulated data, data serving capacity to Tier-2 centres for analysis, and the bulk of the reprocessing and event selection capacity in the experiment. The Tier-1 sites have a challenging role in CMS because they are expected to ingest and archive data from both CERN and regional Tier-2 centres, while they export data to a global mesh of Tier-2s at rates comparable to the raw export data rate from CERN. The combined capacity of the Tier-1 centres is more than twice the resources located at CERN and efficiently utilizing this large distributed resources represents a challenge. In this article we will discuss the experience building, operating, and utilizing the CMS Tier-1 computing centres. We will summarize the facility challenges at the Tier-1s including the stable operations of CMS services, the ability to scale to large numbers of processing requests and large volumes of data, and the ability to provide custodial storage and high performance data serving. We will also present the operations experience utilizing the distributed Tier-1 centres from a distance: transferring data, submitting data serving requests, and submitting batch processing requests.

Wolfgang Kummer at CERN

Science.gov (United States)

Schopper, Herwig

Wolfgang Kummer was not only a great theorist but also a man with a noble spirit and extensive education, based on a fascinating long-term Austrian cultural tradition. As an experimentalist I am not sufficiently knowledgeable to evaluate his contributions to theoretical physics - this will certainly be done by more competent scientists. Nevertheless I admired him for not only being attached to fundamental and abstract problems like quantum field theory, quantum gravity or black holes, but for his interest in down to earth questions like electron-proton scattering or the toponium mass. I got to know Wolfgang Kummer very well and appreciate his human qualities during his long attachment to CERN, in particular when he served as president of the CERN Council, the highest decision taking authority of this international research centre, from 1985 to 1987 falling into my term as Director-General…

11 March 2010 - Ambassador of Canada to Switzerland and to Liechtenstein R. Santi in the ATLAS visitor centre with Collaboration Deputy Spokesperson A. Lankford and signing the guest book with CERN Director-General R. Heuer.

CERN Multimedia

Maximilien Brice

2010-01-01

11 March 2010 - Ambassador of Canada to Switzerland and to Liechtenstein R. Santi in the ATLAS visitor centre with Collaboration Deputy Spokesperson A. Lankford and signing the guest book with CERN Director-General R. Heuer.

Overview of different control strategies for a typical cryogenic warm compressor station at CERN

Science.gov (United States)

Pezzetti, M.; Garcia, C. V. M.; Bradu, B.; Rogez, E.

2017-12-01

Helium cryogenic systems are extensively used at CERN under several configurations for accelerators and detectors. The Warm Compressor Station (WCS) is the primary component of the helium cryogenic systems. The basic controls structure mainly depends on the bypass, charge and discharge valves configuration ensuring the nominal flow and compression ratio. This paper presents three studied methods for the WCS process control systems covering all transient and operational requirements: the proportional-integral-derivative (PID) control approach, the Fuzzy Logic Control approach (FLC) and the Internal Model Control approach (IMC). The paper emphasizes on simulation results of the different control strategies using Ecosimpro software associated to the CERN CryoLib library. Advantages and limitations of each method are presented.

CERN moves to http://home.cern

CERN Multimedia

2015-01-01

A new top-level domain for CERN will be inaugurated next week, with the migration of the core website to http://home.cern.   The new home.cern webpage. The .cern top-level domain is intended for the exclusive use of CERN and its affiliates, and will soon be open for applications from within the community. Clear governance mechanisms for registration and management of .cern domains have been put in place. Applications for domains may be submitted by current members of the CERN personnel, and must be sponsored by a CERN entity such as a department, experiment, project or CERN-recognised experiment. For more information please refer to the registration policy. The acquisition of the .cern top-level domain was negotiated via ICANN’s new gTLD programme by a board comprising members of the CERN Legal Service, Communications group and IT department. .cern is one of over 1,300 new top-level domains that will launch over the coming months and years. The .cern domain nam...

French Prime Minister tours CERN

CERN Multimedia

Anaïs Schaeffer

2012-01-01

On 30 July, Jean-Marc Ayrault, the Prime Minister of the French Republic, and Geneviève Fioraso, the Minister of Higher Education and Research, visited the Laboratory.   After being met by the Director-General at LHC Point 5, they visited the CMS control centre and experiment cavern, and got a glimpse of the LHC tunnel at Point 5. The visit ended with a round-table discussion with French and other international members of CERN’s scientific community. During the discussion, the Prime Minister reaffirmed that “support for fundamental research has to be maintained, and France must continue to invest in education, research and innovation.” He also paid tribute to CERN's role in international cooperation, which he qualified as “a fine example of science without borders.”

MedAustron board visits CERN

CERN Multimedia

CERN Bulletin

On 14 October, the board of EBG MedAustron, which is overseeing the construction of Austria’s hadron therapy centre, visited CERN. The visit recognized the relationship of shared knowledge, technology and training between CERN and MedAustron.   Normal.dotm 0 0 1 17 98 cern 1 1 120 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} ...

CERN Summer Student Webfest: a cradle of creativity

CERN Multimedia

François Grey

2015-01-01

The CERN Summer Student Webfest has garnered a reputation for launching creative projects in fields as diverse as online games and cryptographic software, using the popular format of a hackfest. This year, the annual weekend event will celebrate its fourth year between 31 July and 2 August.   What unites Webfest projects is that they are conceived and developed by teams of CERN summer students, with some advice and guidance provided by mentors drawn from CERN and several partners. The event is organised by the Citizen Cyberscience Centre, a partnership between CERN, the UN Institute of Training and Research, and the University of Geneva. Event partners also include Mozilla Foundation, the EC Citizen Cyberlab project and THE Port hackathon. In 2014, one of the winning teams developed Particle Clicker, a spoof on a simple game called Cookie Clicker. Particle Clicker humorously illustrated the sociological aspects of the high-energy physics community through the rewards it provided players for clic...

CERN and the JRC discuss new collaboration opportunities

CERN Multimedia

Antonella Del Rosso

2014-01-01

At a recent meeting organised by the Knowledge Transfer group, the Director for Science Policy and Stakeholder Relations of the European Commission Joint Research Centre (JRC) together with a delegation from five JRC institutes came to CERN to identify topics of common interest where concrete collaborations between the two organisations could start.   Although CERN and the JRC have been collaborating over the last two decades on neutron-related research through the n-TOF collaboration and CERN is a member of the JRC’s TTO CIRCLE (see box), the bilateral meeting organised at the end of January was the first of its kind.  “Within the TTO CIRCLE we had met in many other circumstances. However, since the JRC is the only EC Directorate-General performing research and CERN is Europe’s largest scientific laboratory, it seemed natural to explore better the specific areas where there is a common interest in sharing knowledge and possibly trigger new developments,&...

Domain Specific Language for Magnetic Measurements at CERN

CERN Document Server

Petrone, C

2009-01-01

CERN, the European Organization for Nuclear Research, is one of the world’s largest and most respected centres for scientific research. Founded in 1954, the CERN Laboratory sits astride the Franco–Swiss border near Geneva. It was one of Europe’s first joint ventures and now has 20 Member States. Its main purpose is fundamental research in partcle physics, namely investigating what the Universe is made of and how it works. At CERN, the design and realization of the new particle accelerator, the Large Hadron Collider (LHC), has required a remarkable technological effort in many areas of engineering. In particular, the tests of LHC superconducting magnets disclosed new horizons to magnetic measurements. At CERN, the objectively large R&D effort of the Technolgy Department/Magnets, Superconductors and Cryostats (TE/MSC) group identified areas where further work is required in order to assist the LHC commissioning and start-up, to provide continuity in the instrumentation for the LHC magnets maintenance,...

Winter Atomiades 2014: CERN skiers win 31 medals!

CERN Multimedia

CERN Bulletin

2014-01-01

The 12th Winter Atomiades took place at Flachau, Austria, from 8 to 15 March 2014. The event, organised by the Association of the Sports Communities of the European Research Institutes (see here), brought together 18 research centres, including CERN, AIT, ESRF, PSI and many others, with a total of about 280 participants.   Lots of fun and a great result for the 13 CERN skiers at the 2014 Winter Atomiades in Flachau, Austria. From left to right and from bottom to top: Lennart Jirden (PH), Anna Lipniacka (PH), Guillaume Michet (DGS), Vera Chetvertkova (TE), Thierry Boileau (external), Jean-Louis Grenard (EN), Clement Bovet (EN), Marc Tavlet (BE), Rob Knoops (PH), Giuseppe Lo Presti (IT), Simone Campana (IT), Sylviane Gander (external) and Javier Pablos (TE).   The team of 13 athletes from six different CERN departments won 31 medals across all disciplines, in a spirit of fun and fair play. CERN came second in the general ranking of all participating institutes! The next Winter Atomiades...

Taking CERN physics to South Asia

CERN Multimedia

Abha Eli Phoboo

2015-01-01

CERN physicists travelled to South Asia last month to bring a plethora of particle physics events to schools, universities and public venues. The initiative was the first of its kind in the region, and brought CERN particle physics to a new audience in Nepal and India.   Kathmandu University students take part in an ATLAS virtual visit. On 19 December 2014, students from Kathmandu University and Tribhuvan University, Nepal and 16 schools in Punjab, India took part in a joint virtual visit to ATLAS. The visit, which was the first of its kind in South Asia, followed a two-day Masterclass in particle physics that took place simultaneously in the two countries. The Masterclass was organised as a part of Physics Without Frontiers, an International Centre for Theoretical Physics project in partnership with CERN. Besides the Masterclass, physics workshops led by ATLAS physicists Kate Shaw, Joerg Stelzer and Suyog Shrestha were held for high school students and science teachers in three different d...

The MedAustron Project at CERN, Status Report, May 2013

CERN Document Server

Benedikt, M; Gutleber, J

2013-01-01

MedAustron is a light ion-therapy and research centre based on a synchrotron accelerator complex under construction in Austria. It is the first large-scale accelerator facility in Austria. For the implementation of the required accelerator technologies, the county of Lower Austria and the company EBG MedAustron have set up dedicated agreements with CERN. These cover the assistance of CERN for the design and manufacturing follow-up of accelerator components and training of MedAustron personnel. CERN contributed to the MedAustron construction in particular by providing domain expertise, infrastructure, and manpower in relation with the design, the tendering and procurement processes.\

Exchange of equipment between CERN and JINR

CERN Multimedia

CERN Bulletin

2010-01-01

The drift chambers of the former NA48 experiment have recently left CERN to be installed in the MPD experiment at the future NICA accelerator in Dubna, Russia. As a counterpart, the JINR Laboratory will produce drift chambers for the new NA62 experiment. This operation is a fruitful exchange of technology that profits both laboratories and enhances their collaboration.   On 22 July, in the occasion of the departure of the chambers from CERN, Mikhail Itkis (centre), acting Director of the JIINR visited the NA62 experimental area accompanied by Rolf Heuer (left), CERN Director General and Ferdinand Hahn, NA62 technical Co-ordinator. The NA48 drift chambers were overhauled in 2000 and employed until 2008. With a total of 110 kilometres of wire soldered to a very high degree of precision, the four drift chambers were a crucial element of the experimental kaon programme at CERN. The chambers are now moving to a new challenge as they will be re-used by the Multi Purpose Detector (MPD) experiment, under...

CERN clubs join the fiftieth anniversary party!

CERN Document Server

2004-01-01

CERN's clubs are planning to celebrate the Organization's 50th anniversary by organising a variety of special events. It's raining projects! CERN's clubs have chosen to celebrate the Organization's Golden Jubilee, each in its own style, by organising a whole host of anniversary events. While the Cine-Club continues to screen films made in the Member States on Thursday evenings, other clubs are organising special races and tournaments to honour CERN's 50th year. The CERN Rugby Club led the way in early April when it hosted a children's tournament which brought the Laboratory firmly into the view of its many young participants. On 24 April, the Cycling Club moves to centre stage as it takes its members on a unique 50-km discovery trip around the countryside above the tunnel of the future LHC. The Croquet Club, the Running Club, the Horse Riding Club and the Golf Club will all be joining the party in May and June. After that, football, softball, cycling, pétanque and sailing are just some of the items on a sp...

Quality Management of CERN Vacuum Controls

CERN Document Server

Antoniotti, F; Fortescue-Beck, E; Gama, J; Gomes, P; Le Roux, P; Pereira, H; Pigny, G

2014-01-01

The vacuum controls Section (TE-VSC-ICM) is in charge of the monitoring, maintenance and consolidation of the control systems of all accelerators and detectors in CERN; this represents 6 000 instruments distributed along 128 km of vacuum chambers, often of heterogeneous architectures and of diverse technical generations. In order to improve the efficiency of the services provided by ICM, to vacuum experts and to accelerator operators, a Quality Management Plan is being put into place. The first step was the standardization of the naming convention across different accelerators. The traceability of problems, requests, repairs, and other actions, has also been put into place (VTL). This was combined with the effort to identify each individual device by a coded label, and register it in a central database (MTF). Occurring in parallel, was the gathering of old documents and the centralization of information concerning architectures, procedures, equipment and settings (EDMS). To describe the topology of control c...

19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

CERN Multimedia

Maximilien Brice

2011-01-01

19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

21 March 2011 - South African Ministry of Science and Technology, Department of Science and Technology (DST) Director General P. Mjwara signing the guest with Head of International Relations F. Pauss and Adviser J. Ellis and ALICE Collaboration Spokesperson P. Giubellino and J. Cleymans; in the CERN control centre with R. Steerenberg; visiting ALICE surface exhibition with P. Giubellino and LHC superconducting magnet test hall with L. Bottura.

CERN Multimedia

Maximilien Brice

2011-01-01

21 March 2011 - South African Ministry of Science and Technology, Department of Science and Technology (DST) Director General P. Mjwara signing the guest with Head of International Relations F. Pauss and Adviser J. Ellis and ALICE Collaboration Spokesperson P. Giubellino and J. Cleymans; in the CERN control centre with R. Steerenberg; visiting ALICE surface exhibition with P. Giubellino and LHC superconducting magnet test hall with L. Bottura.

Fixed telephony evolution at CERN

CERN Multimedia

CERN. Geneva

2015-01-01

The heart of CERN’s telephony infrastructure consists of the Alcatel IP-PBX that links CERN’s fixed line phones, Lync softphones and CERN’s GSM subscribers to low-cost local and international telephony services. The PABX infrastructure also supports the emergency “red telephones” in the LHC tunnel and provides vital services for the Fire and Rescue Service and the CERN Control Centre. Although still reliable, the Alcatel hardware is increasingly costly to maintain and looking increasingly outmoded in a market where open source solutions are increasingly dominant. After presenting an overview of the Alcatel PABX and the services it provides, including innovative solutions such as the Closed User Group for our mobile telephony services, we present a possible architecture for a software based system designed to meet tomorrow’s communication needs and describe how the introduction of open-source call routers based on the SIP protocol and Session Border Controllers (SBC) could foster the introduction...

The CERN PS/SL Controls Java Application Programming Interface

International Nuclear Information System (INIS)

I. Deloose; J. Cuperus; P. Charrue; F. DiMaio; K. Kostro; M. Vanden Eynden; W. Watson

1999-01-01

The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

Les Robertson, CERN's LCG project manager

CERN Multimedia

Maximilien Brice

2003-01-01

"The LCG will provide a vital test-bed for the new Grid computing technologies that are set to revolutionise the way scientists use the world's computing resources in areas ranging from fundamental research to medical diagnosis," said Les Robertson, CERN's LCG project manager. The Grid is a new method of sharing processing power between computers in centres around the world.

Major Refit for CERN's 400 kV Substation (Part of the new control and protection system for the 18 kV side)

CERN Document Server

2001-01-01

The 400 kV substation on the Prévessin site brings in the electricity that powers CERN's accelerators and the majority of the Laboratory's installations. It was originally built in the 1970s for the SPS, and is one of only five privately owned 400 kV sub-stations in France. Three of the others belong to the national railway company, SNCF, supplying the Paris-Marseilles TGV line, the other is at the Cadarache research centre near mouth of the Rhone. After nearly thirty years of service, CERN's substation has just undergone a complete overhaul.

From the CERN web: WEF, ALPHA, CAST and more

CERN Multimedia

2016-01-01

This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...     Anne Richards, Chair of the CERN & Society Foundation (left) chairs a meeting on diversity at Davos with CERN Director General, Fabiola Gianotti (centre), and Clare Matterson, Director of Strategy at the Wellcome Trust. (Image: Giovanni Porcellana/CERN)   Director General attends WEF annual meeting in Davos 28 January – by James Gillies As head of a major intergovernmental organisation, CERN’s Director General has a standing invitation to attend the World Economic Forum’s annual meeting of leaders in politics, business and other walks of life at the Swiss mountain resort of Davos, and it’s an invitation that Fabiola Gianotti accepted this year. The theme for this year’s meeting was ‘mastering the fourth industrial revo...

JACoW A new distributed control system for the consolidation of the CERN tertiary infrastructures

CERN Document Server

Scibile, Luigi; Villeton Pachot, Patrick

2018-01-01

The operation of the CERN tertiary infrastructures is carried out via a series of control systems distributed over the CERN sites (Meyrin and Prevessin). The scope comprises: $\\sim$ 260 buildings, 2 large heating plants ($\\sim$ 50 MW overall capacity) with 27 km heating network and 200 radiators circuits, $\\sim$ 500 air handling units, $\\sim$ 52 chillers, $\\sim$ 300 split systems, $\\sim$ 3000 electric boards and $\\sim$ 100k light points. In the last five years and with the launch of major tertiary infrastructure consolidations, CERN is carrying out a migration and an extension of the old control systems dated back to the 70's, 80's and 90's to a new simplified, yet innovative, distributed control system aimed at minimizing the programming and implementation effort, standardizing equipment and methods and reducing lifecycle costs. This new methodology allows for a rapid development and simplified integration of the new controlled building/infrastructure processes. The basic principle is based on open standards...

Software development agreement between CERN and the Indian Department of Atomic Energy

CERN Multimedia

Patrice Loïez

2003-01-01

The development and prototyping work for the LHC computing facility is being organised as a project that includes many scientific institutes and industrial partners, coordinated by CERN. The project is nicknamed LCG (after LHC Computing Grid). Addendum No. 1 to the Protocol dated 24/09/02 to the 1991 co-operation agreement between CERN and the Department of Atomic Energy (DAE) of the Government of India defines the collaboration between CERN and DAE on software development for the LCG Prototype Project. Signing the addendum are G. Govindrajan (left), Director of the Electronics and Instrumentation Group at the Bhabha Atomic Research Centre, Mumbai, India and Dr. Hans Hoffmann, CERN Director for Technology Transfer and for Scientific Computing.

Baby falcon rescued on CERN site

CERN Multimedia

Harriet Jarlett

2016-01-01

This baby falcon was found on Tuesday, 7 June near a car parked in the Building 40 carpark.   Connie Potter, who first saw the bird, contacted CRR (Centre de Réadaptation des Rapaces) at Bardonnex. Following their advice Connie and Chris Thomas managed to pick it up and get it into a box, and waited with the bird at the main gate for the CRR to collect it. The chick will be fed and trained to fly at the Centre in a tunnel, and ultimately released into the wild, probably near CERN. The bird, who has been tagged with ID number 2054, weighed 119 grams.

An Integrated Library System on the CERN Document Server

CERN Document Server

Rodrigues Silvestre, Joaquim Jorge; Le Meur, Jean-Yves; Šimko, Tibor

2010-01-01

CERN – The European Organization for Nuclear Research – is one of the largest research centres worldwide, responsible for several discoveries in physics as well as in computer science. The CERN Document Server, also known as CDS Invenio, is a software developed at CERN, which aims to provide a set of tools for managing digital libraries. In order to improve the functionalities of CDS Invenio a new module was developed , called BibCirculation, to manage books (and other items) from the CERN library, and working as an Integrated Library System. This thesis shows the steps that have been done to achieve the several goals of this project, explaining, among others aspects, the process of integration with other existing modules as well as the way to associate the information about books with the metadata from CDS Invenio. You can also find a detailed explanation of the entire implementation process and testing. Finally, there are presented the conclusions of this project and ideas for future development.

A new visitor centre for CMS

CERN Document Server

2001-01-01

At the inauguration of the new CMS visitor centre. The CMS experiment inaugurated a new visitor centre at its Cessy site on 14 June. This will allow the thousands of people who come to CERN each year to follow the construction of one the Laboratory's flagship experiments first-hand. CERN receives over 20,000 visitors each year. Until recently, many of them were taken on a guided tour of one of the LEP experiments. With the closure of LEP, however, trips underground are no longer possible, and the Visits' Service has put in place a number of other itineraries (Bulletin 46/2000). Since the CMS detector will be almost entirely constructed in a surface hall, it is now taking a big share of the limelight. The CMS visitor centre has been built on a platform overlooking CMS construction. It contains a set of clear descriptive posters describing the experiment, along with a video projection showing animations and movies about CMS construction. In the coming weeks, a display of CMS detector elements will be added, as...

Thomas Kibble visits CERN

CERN Multimedia

Rosaria Marraffino

2014-01-01

Emeritus Professor Sir Thomas W.B. Kibble, from Imperial College London visited LHC for the first time last week and delivered a colloquium on the genesis of electroweak unification and the Brout-Englert-Higgs mechanism.   From left to right: Jim Virdee, Tiziano Camporesi, Tom Kibble and Austin Ball on the visit to CMS. On his way back from Trieste, where he received the Abdus Salam International Centre for Theoretical Physics' Dirac Medal, Tom Kibble stopped by CERN for his first visit to the LHC. Kibble had a standing invitation from Jim Virdee, former CMS spokesperson, who is also a researcher from Imperial College London. Peter Jenni (left) and Tom Kibble tour the ATLAS detector. (Image: Erwan Bertrand) Kibble made the trip to CERN a family outing and brought along 14 relatives,  including his children and grandchildren. He visited the ATLAS detector with Peter Jenni, its former spokesperson, on Friday 10 October. In the afternoon, Kibble delivered a colloquium in the...

CERN's Tree of Science at the Summit

CERN Multimedia

2004-01-01

The World Summit on the Information Society held its closing session at Palexpo on 12 December. During the Summit, CERN organised the SIS Forum, the Tree of Science, at Palexpo. Kofi Annan and Tim Berners-Lee, sending a message to 800 schools around the world, from the first Web server will remain one of the abiding images of the Science Stand organised by CERN as part of the World Summit on the Information Society last December. According to its designer, François Fluckiger (IT Department) this stand was not intended purely as an exhibition or as a lecture point but as a forum. Thirty-two scientific institutions throughout the world made their own contributions to the information society over the five days of the exhibition. In all, 42 science projects were exhibited to several thousand visitors under four themes: education and culture; health; environment, development and risks; fundamental sciences and enabling technologies. CERN's stand represented a tree with a trunk in the centre with scre...

Orienteering World Cup hosted by CERN Club

CERN Multimedia

Katarina Anthony

2010-01-01

Elite runners took to the streets of Geneva for the last leg of the Orienteering World Cup, from 8-10 October. The Geneva finals were hosted by the CERN Orienteering Club and concluded months of competitions held across 5 countries.   Women's World-Cup winner, Simone Niggli (centre).  © Ilknur Colak The final events of the Orienteering World Cup took place in the Old Town of Geneva and Saint-Cergue, with runners following routes prepared by the CERN Orienteering Club. Orienteering is a sport of navigation, using only a compass, map and your sense of direction. The objective is to get to all the points on the map as quickly as possible, choosing your own paths as you run. This was the CERN club’s first successful participation in the World Cup, cementing its reputation as a fixture in the international orienteering world. Orienteering is not your typical Swiss pastime. Developed in Scandinavia, the sport has been gaining popularity internationally. “...

Status of PACMAN Project at CERN

CERN Document Server

Catalan-Lasheras, Nuria; Modena , Michele

2015-01-01

Though the Large Hadron Collider (LHC) at CERN is just at the start of a program expected to run for 20 additional years, CERN is studying the next generation of colliders, like the Compact Linear Collider (CLIC). This project proposes an electron-positron collider with a length close to 50 km and with a centre of mass energy of 3 TeV at the collision point. One of the main challenges is the sub-micrometric size of the beams, down to a few nanometres at the interaction point. As a consequence, the accelerator will require unprecedented nanometric tolerances of beam alignment. A series of several thousands components will have to be assembled, aligned at the micrometre level and most critically, stabilized actively at the nanometre level. PACMAN, a study on Particle Accelerator Components Metrology and Alignment to the Nanometre scale, is a Marie Curie Program supported by the European Commission (FP7 Program), creating a network of 16 Academic and Industrial Partners. The project is hosted at CERN and it offe...

Multi-technology control centre to integrate 460 MW renewables

International Nuclear Information System (INIS)

2016-01-01

The new RWE Innogy Aersa Control Centre that has been certified to act as an interface with CECRE (the Renewable Energy Control Centre) since February 2015, connects RWE’s 20 renewable energy facilities with REE, the Spanish Electricity Grid. As a result, it ensures that wind farms, in addition to hydropower and solar plants, can inject the energy generated by its 460 MW installed safely and with no penalties. Green Eagle Solutions, a provider of software solutions for renewable energy companies, has collaborated with RWE in the development of this Control Centre, meeting the high standards of quality and safety required by RWE. This centre uses CompactSCADA® technology to integrate power generation facilities that need to be integrated in a Control Centre to communicate with REE’s CECRE. (Author)

CERN apprenticeships honoured at the Cité des Métiers

CERN Multimedia

2006-01-01

Florian Métral, an electronics apprentice at CERN, accepting his prize at the award ceremony.CERN's exhibition stand at the Cité des Métiers et des Formations. CERN has just taken part in the Cité des Métiers et des Formations for the first time. This job and training fair, designed to assist both young people and adults in their choice of profession, training or career change, was held at Palexpo, Geneva's main exhibition centre, from 13 to 19 November. CERN had its own stand, where the Laboratory's activities and its many different trades and training opportunities were on display. Throughout the week and the weekend, a series of guides and members of the HR Department took it in turns to present CERN and the wide range of training it offers students and apprentices. Apprentices came into the spotlight on 13 November, when the Union Industrielle Genevoise awarded prizes to the eight most meritorious apprentices in the field of mecatronics (mechanical and electronics engineering) in the Canton of Gene...

CCLIBS: The CERN Power Converter Control Libraries

CERN Document Server

AUTHOR|(SzGeCERN)404953; Lebioda, Krzysztof Tomasz; Magrans De Abril, Marc; Martino, Michele; Murillo Garcia, Raul; Nicoletti, Achille

2015-01-01

Accurate control of power converters is a vital activity in large physics projects. Several different control scenarios may coexist, including regulation of a circuit’s voltage, current, or field strength within a magnet. Depending on the type of facility, a circuit’s reference value may be changed asynchronously or synchronously with other circuits. Synchronous changes may be on demand or under the control of a cyclic timing system. In other cases, the reference may be calculated in real-time by an outer regulation loop of some other quantity, such as the tune of the beam in a synchrotron. The power stage may be unipolar or bipolar in voltage and current. If it is unipolar in current, it may be used with a polarity switch. Depending on the design, the power stage may be controlled by a firing angle or PWM duty-cycle reference, or a voltage or current reference. All these cases are supported by the CERN Converter Control Libraries (CCLIBS). These open-source C libraries include advanced reference generati...

The CERN's year; L'annee du CERN

Energy Technology Data Exchange (ETDEWEB)

Chadli, M. [Universite de Picardie Jules Verne, CREA, 80 - Amiens (France); Coppier, H. [Ecole Superieure d' Ingenieurs en Electrotechnique et Electronique d' Amiens - ESIEE Amiens, 80 - Amiens (France); Pezzeti, M. [Conseil Europeen pour la Recherche Nucleaire (CERN), Geneve (Switzerland)

2007-12-15

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W{sup +}, W{sup -} and Z{sub 0} bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

JACoW Model learning algorithms for anomaly detection in CERN control systems

CERN Document Server

Tilaro, Filippo; Gonzalez-Berges, Manuel; Roshchin, Mikhail; Varela, Fernando

2018-01-01

The CERN automation infrastructure consists of over 600 heterogeneous industrial control systems with around 45 million deployed sensors, actuators and control objects. Therefore, it is evident that the monitoring of such huge system represents a challenging and complex task. This paper describes three different mathematical approaches that have been designed and developed to detect anomalies in any of the CERN control systems. Specifically, one of these algorithms is purely based on expert knowledge; the other two mine the historical generated data to create a simple model of the system; this model is then used to detect faulty sensors measurements. The presented methods can be categorized as dynamic unsupervised anomaly detection; “dynamic” since the behaviour of the system and the evolution of its attributes are observed and changing in time. They are “unsupervised” because we are trying to predict faulty events without examples in the data history. So, the described strategies involve monitoring t...

The CERN's year

International Nuclear Information System (INIS)

Chadli, M.; Coppier, H.; Pezzeti, M.

2007-01-01

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W + , W - and Z 0 bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

14 December 2011 - Czech Republic Delegation to CERN Council and Finance Committees visiting ATLAS experimental area, LHC tunnel and ATLAS visitor centre with Former Collaboration Spokesperson P. Jenni, accompanied by Physicist R. Leitner and Swiss student A. Lister.

CERN Multimedia

Estelle Spirig

2011-01-01

14 December 2011 - Czech Republic Delegation to CERN Council and Finance Committees visiting ATLAS experimental area, LHC tunnel and ATLAS visitor centre with Former Collaboration Spokesperson P. Jenni, accompanied by Physicist R. Leitner and Swiss student A. Lister.

Open Hardware for CERN's accelerator control systems

International Nuclear Information System (INIS)

Bij, E van der; Serrano, J; Wlostowski, T; Cattin, M; Gousiou, E; Sanchez, P Alvarez; Boccardi, A; Voumard, N; Penacoba, G

2012-01-01

The accelerator control systems at CERN will be upgraded and many electronics modules such as analog and digital I/O, level converters and repeaters, serial links and timing modules are being redesigned. The new developments are based on the FPGA Mezzanine Card, PCI Express and VME64x standards while the Wishbone specification is used as a system on a chip bus. To attract partners, the projects are developed in an 'Open' fashion. Within this Open Hardware project new ways of working with industry are being evaluated and it has been proven that industry can be involved at all stages, from design to production and support.

Development of the Advanced CANDU Reactor control centre

International Nuclear Information System (INIS)

Malcolm, S.; Leger, R.

2004-01-01

The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

Development of the advanced CANDU reactor control centre

International Nuclear Information System (INIS)

Malcolm, S.; Leger, R.

2004-01-01

The next generation CANDU control centre is being designed for the Advanced CANDU Reactor (ACR) station. The design is based upon the recent Qinshan control room with further upgrades to meet customer needs with respect to high capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This evolutionary design includes the long proven functionality at several existing CANDU control centres such as the 4-unit station at Darlington, with advanced features made possible by new control and display technology. Additionally, ACR control centres address characteristics resulting from Human Factors Engineering (HFE) analysis of control centre operations in order to further enhance personnel awareness of system and plant status. Statistics show that up to 70% of plant significant events, which have caused plant outages, have a root cause attributable to the human from such sources as complex interfaces, procedures, maintenance and management practices. Consequently, special attention is made for the application of HFE throughout the ACR design process. The design process follows a systematic analytical approach to define operations staff information and information presentation requirements. The resultant human-system interfaces (HSI) such as those for monitoring, annunciation and control information are then verified and validated against the system design requirements to provide a high confidence level that adequate and correct information is being provided in a timely manner to support the necessary operational tasks. The ACR control centre provides plant staff with an improved operability capability due to the combination of systematic design and enhanced operating features. Significant design processes (i.e. development) or design features which contribute to this improved operability, include: Design Process: Project HFE Program Plan - intent, scope, timeliness and interfacing; HFE aspects of design process - procedures and instructions

Six new projects will bridge gap between CERN and society

CERN Multimedia

Anaïs Rassat, Knowledge Transfer Group

2016-01-01

Knowledge Transfer Fund awarded over six hundred thousand Swiss francs to six projects in 2016.   Computer racks at the CERN Data Centre, the heart of CERN’s entire scientific, administrative, and computing infrastructure. CERN has awarded funding to six new projects with the aim to bridge the gap between technology and society. Over 600,000 CHF (€ 542,766) of capital was granted through its competitive Knowledge Transfer Fund (KT Fund). The fund is issued as part of CERN’s goal to maximize its overall impact on society. The selected projects cover new applications for CERN technology in a broad range of fields beyond high-energy physics, ranging from cancer diagnostics and aerospace applications, to next-generation cloud computing, radiation safety, and digital preservation. The technologies were developed at CERN as part of the variety of high-energy physics needs, and arise from several research departments: Engineering, Information Technology, Be...

CERN-BINP Workshop for Young Scientists in $e^{+}e^{-}$ Colliders

CERN Document Server

Linssen, Lucie; eCOL 2016

2017-01-01

The "CERN-BINP workshop for young scientists in e+e- colliders" is organised in the framework of the EU-funded CREMLIN project. The CREMLIN project aims at strengthening science cooperation between six Russian megascience facilities and related research infrastructure counterparts in Europe. BINP and CERN coordinate a dedicated CREMLIN work package focusing on a future super-charm-tau factory (SCT) at BINP. SCT aims at producing e+e- collisions with up to 5 GeV centre-of-mass energy and at very high luminosity. In parallel CERN is hosting design studies for two possible high-energy e+e- colliders: FCC-ee and CLIC. In matters of physics, design and technologies the BINP and CERN studies address technological and scientific questions of common interest. Similar issues are dealt with in the framework of other flavour factories and energy frontier e+e- colliders worldwide. The 3-day workshop provides young scientists (at the student and postdoc level) opportunities to present their work and exchange experiences. ...

Parking regulations on the CERN sites

CERN Multimedia

General Infrastructure Services Department

2010-01-01

The site surveillance service is also responsible for supervising compliance with the parking regulations on the CERN site. In that context, it ensures that the following rules are complied with on the CERN car park: Vehicles may not be left on a CERN car park for longer than 5 consecutive working days. However, CERN users are entitled to leave their vehicles parked at CERN for a longer period in the car park near Building 588 , subject to completing the application form "Demande d'autorisation pour un stationnement de longue durée" (application for a long-term parking permit) and sending it to the Reception and Access Control Service (access.surveillance@cern.ch) prior to departure.   Parking spaces, which are in short supply in many crowded areas of the CERN site, must not be occupied by abandoned vehicles/wrecks. The service organizes the disposal of such vehicles. Any CERN users wishing to get rid of a private vehicle parked on one of the CERN car pa...

The control system for the CERN proton synchrotron continuous transfer ejection

International Nuclear Information System (INIS)

Bloess, D.; Boucheron, J.; Flander, D.; Grier, D.; Krusche, A.; Ollenhauer, F.; Pearce, P.; Riege, H.; Schneider, G.C.

1978-01-01

This report describes the hardware and the software structure of a stand-alone control system for the continuous transfer ejection from the CERN Proton Synchrotron to the Super Proton Synchrotron. The process control system is built around a PDP 11/40 mini-computer interfaced to the ejection elements via CAMAC. It features automatic failure recovery and real-time process optimization. Performance, flexibility, and reliability of the system is evaluated. (Auth.)

From the CERN web: top quarks, incubation centres, TEDxCERN and more

CERN Multimedia

2015-01-01

This new section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   The figure shows the data in the search for the rare s-channel single-top production after the background events have been subtracted. ATLAS presents new top physics results 17 September - ATLAS Collaboration This week, physicists from around the world are gathering at the Top 2015 workshop in Ischia, Italy to discuss the latest measurements of the top quark. As the heaviest known fundamental particle, the top quark plays a special role in the search for "new physics". In results presented at Top 2015, the ATLAS collaboration combed through their high-precision Run 1 LHC data to see if the top quark is behaving as predicted by the Standard Model of particle physics. ATLAS also presented new measurements of top-quark production at high-energy (13 TeV) from early analyses of the ongoing Run 2 of the ...

Fundamental particles Bat 774 at CERN

CERN Document Server

Soppelsa, Francesco

2016-01-01

The book talks about the design and construction of the building 774 at CERN. The building 774 is a unique building both for its architectural value and for its location. Located in front of of the CCC (Control Center) at CERN is the main door of more than 100,000 tourists come visiting CERN each year.

Open Days Guide: CERN, for a better life

CERN Multimedia

CERN Bulletin

2013-01-01

At times, CERN research can seem rather “out there”. After all, how can this work possibly relate to daily life? So, let’s bring it back down to Earth with some real-life examples of CERN technology in action.   A treatment room at the Italian centre for hadron therapy (CNAO). Image: CNAO. On the Open Days, visit these sites for a first-hand look at CERN’s important and innovative role in everyday technology: - The Knowledge Transfer (KT) visit point, where you will be introduced to hadron therapy, Positron Emission Tomography (PET), the Medicis project and Medipix. There, you will be able to see an immobilization mask, where patients are placed during hadron therapy treatment, as well as a “phantom” – a piece used to simulate the human body for radiobiology studies. (Map: A3). - Pôle Energie: Technologies developed for CERN accelerators have been used to design and build a high-tech solar thermal collector. Th...

Italy's Prime Minister visits CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

People and things. CERN Courier, Jun 1985, v. 25(5)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1985-06-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. To honour one of the greatest physicists of the century, who died last October, and a staunch friend, the International Centre for Theoretical Physics in Trieste has announced the Paul Adrien Dirac Gold Medal Award, to be given annually for highest achievement in theoretical physics. The International Committee for Future Accelerators, ICFA, held its twelfth meeting at the Tata Institute of Fundamental Research, Bombay, on 10 April. The CERN Accelerator School was greatly encouraged by the response to the General Accelerator Physics Course organized last year in collaboration with the Orsay and Saclay Laboratories in France. On 11 March, the International Centre for Theoretical Physics (ICTP) in Trieste paid tribute to the memory of Alfred Kastler, Nobel Laureate for Physics 1966 and Chairman of the ICTP Scientific Council from 1970 to 1982, who died on 7 January 1984.

Continue service improvement at CERN computing centre

International Nuclear Information System (INIS)

Lopez, M Barroso; Everaerts, L; Meinhard, H; Baehler, P; Haimyr, N; Guijarro, J M

2014-01-01

Using the framework of ITIL best practises, the service managers within CERN-IT have engaged into a continuous improvement process, mainly focusing on service operation. This implies an explicit effort to understand and improve all service management aspects in order to increase efficiency and effectiveness. We will present the requirements, how they were addressed and share our experiences. We will describe how we measure, report and use the data to continually improve both the processes and the services being provided. The focus is not the tool or the process, but the results of the continuous improvement effort from a large team of IT experts providing services to thousands of users, supported by the tool and its local team. This is not an initiative to address user concerns in the way the services are managed but rather an on-going working habit of continually reviewing, analysing and improving the service management processes and the services themselves, having in mind the currently agreed service levels and whose results also improve the experience of the users about the current services.

Disk storage at CERN

CERN Document Server

Mascetti, L; Chan, B; Espinal, X; Fiorot, A; Labrador, H Gonz; Iven, J; Lamanna, M; Presti, G Lo; Mościcki, JT; Peters, AJ; Ponce, S; Rousseau, H; van der Ster, D

2015-01-01

CERN IT DSS operates the main storage resources for data taking and physics analysis mainly via three system: AFS, CASTOR and EOS. The total usable space available on disk for users is about 100 PB (with relative ratios 1:20:120). EOS actively uses the two CERN Tier0 centres (Meyrin and Wigner) with 50:50 ratio. IT DSS also provide sizeable on-demand resources for IT services most notably OpenStack and NFS-based clients: this is provided by a Ceph infrastructure (3 PB) and few proprietary servers (NetApp). We will describe our operational experience and recent changes to these systems with special emphasis to the present usages for LHC data taking, the convergence to commodity hardware (nodes with 200-TB each with optional SSD) shared across all services. We also describe our experience in coupling commodity and home-grown solution (e.g. CERNBox integration in EOS, Ceph disk pools for AFS, CASTOR and NFS) and finally the future evolution of these systems for WLCG and beyond.

Disk storage at CERN

Science.gov (United States)

Mascetti, L.; Cano, E.; Chan, B.; Espinal, X.; Fiorot, A.; González Labrador, H.; Iven, J.; Lamanna, M.; Lo Presti, G.; Mościcki, JT; Peters, AJ; Ponce, S.; Rousseau, H.; van der Ster, D.

2015-12-01

CERN IT DSS operates the main storage resources for data taking and physics analysis mainly via three system: AFS, CASTOR and EOS. The total usable space available on disk for users is about 100 PB (with relative ratios 1:20:120). EOS actively uses the two CERN Tier0 centres (Meyrin and Wigner) with 50:50 ratio. IT DSS also provide sizeable on-demand resources for IT services most notably OpenStack and NFS-based clients: this is provided by a Ceph infrastructure (3 PB) and few proprietary servers (NetApp). We will describe our operational experience and recent changes to these systems with special emphasis to the present usages for LHC data taking, the convergence to commodity hardware (nodes with 200-TB each with optional SSD) shared across all services. We also describe our experience in coupling commodity and home-grown solution (e.g. CERNBox integration in EOS, Ceph disk pools for AFS, CASTOR and NFS) and finally the future evolution of these systems for WLCG and beyond.

Kofi Annan visits CERN

CERN Multimedia

Katarina Anthony

2011-01-01

On Tuesday 13 September, former Secretary-General of the United Nations and Nobel Peace Laureate Kofi Annan paid a visit to CERN.   Arriving in the early afternoon, Kofi Annan and his family were greeted by Director-General Rolf Heuer on the steps of Building 500. After a quick introduction to the Laboratory, they were whisked off to SM18 for a tour of the LHC’s superconducting magnet test hall, guided by Technology Department Head Frédérick Bordry. After a light lunch in Restaurant 2, Kofi Annan added his signature to CERN’s Guest Book. He is the second UN Secretary-General to add their name to CERN’s roster; his successor Ban Ki-Moon’s visited CERN in 2008.  Kofi Annan was then guided by spokesperson Fabiola Gianotti on a tour of ATLAS’s Visitor Centre. This was an opportunity for some of the younger members of the ATLAS collaboration to meet the former Secretary-General and to answer his questions about the exper...

Service management at CERN with Service-Now

International Nuclear Information System (INIS)

Toteva, Z; Fedorko, I; Hefferman, J; Lemaitre, S; Mira, O Pera; Alonso, R Alvarez; Cheimariou, M-E; Clavo, D Martin; Granda, E Alvarez; Pedreira, P Martinez

2012-01-01

The Information Technology (IT) and the General Services (GS) departments at CERN have decided to combine their extensive experience in support for IT and non-IT services towards a common goal – to bring the services closer to the end user based on Information Technology Infrastructure Library (ITIL) best practice. The collaborative efforts have so far produced definitions for the incident and the request fulfilment processes which are based on a unique two-dimensional service catalogue that combines both the user and the support team views of all services. After an extensive evaluation of the available industrial solutions, Service-now was selected as the tool to implement the CERN Service-Management processes. The initial release of the tool provided an attractive web portal for the users and successfully implemented two basic ITIL processes; the incident management and the request fulfilment processes. It also integrated with the CERN personnel databases and the LHC GRID ticketing system. Subsequent releases continued to integrate with other third-party tools like the facility management systems of CERN as well as to implement new processes such as change management. Independently from those new development activities it was decided to simplify the request fulfilment process in order to achieve easier acceptance by the CERN user community. We believe that due to the high modularity of the Service-now tool, the parallel design of ITIL processes e.g., event management and non-ITIL processes, e.g., computer centre hardware management, will be easily achieved. This presentation will describe the experience that we have acquired and the techniques that were followed to achieve the CERN customization of the Service-Now tool.

The keys to CERN conference rooms - Managing local collaboration facilities in large organisations

International Nuclear Information System (INIS)

Baron, T; Domaracky, M; Duran, G; Fernandes, J; Ferreira, P; Lopez, J B Gonzalez; Jouberjean, F; Lavrut, L; Tarocco, N

2014-01-01

For a long time HEP has been ahead of the curve in its usage of remote collaboration tools, like videoconference and webcast, while the local CERN collaboration facilities were somewhat behind the expected quality standards for various reasons. This time is now over with the creation by the CERN IT department in 2012 of an integrated conference room service which provides guidance and installation services for new rooms (either equipped for videoconference or not), as well as maintenance and local support. Managing now nearly half of the 246 meeting rooms available on the CERN sites, this service has been built to cope with the management of all CERN rooms with limited human resources. This has been made possible by the intensive use of professional software to manage and monitor all the room equipment, maintenance and activity. This paper focuses on presenting these packages, either off-the-shelf commercial products (asset and maintenance management tool, remote audio-visual equipment monitoring systems, local automation devices, new generation touch screen interfaces for interacting with the room) when available or locally developed integration and operational layers (generic audio-visual control and monitoring framework) and how they help overcoming the challenges presented by such a service. The aim is to minimise local human interventions while preserving the highest service quality and placing the end user back in the centre of this collaboration platform.

A glamorous interlude at CERN

CERN Multimedia

Katarina Anthony

2012-01-01

Another day, another celebrity-spotting at CERN! The latest: American singer Belinda Carlisle.   As lead singer of one the world’s most popular female bands – The Go-Go’s – and with a successful solo career of her own – with hit tracks like “Heaven is a Place on Earth” – Belinda Carlisle is a household name. While her dedication to music has brought her fame, it hasn’t lessened her enthusiasm for other topics. “I’ve always had an interest in science,” she explained. “I did pretty well in it at school, and I’ve also been reading a lot of quantum physics books lately.” So when Patrick Geeraert, former Head of CERN’s Finance Department and current Head of Administration at ESO, invited her to visit the Laboratory, she said yes. Belinda arrived at CERN on 27 July, and visited SM18, the CCC and the ATLAS visitor centre. She was also given a t...

TEDxCERN breaks the rules

CERN Document Server

Katarina Anthony

2015-01-01

On Friday, 9 October, TEDxCERN brought together 14 ‘rule-breakers’ to explore ideas that push beyond the boundaries of academia. They addressed a full house of 600 audience members, as well as thousands watching the event online.   TEDxCERN broke all the rules this year - starting with its choice of venue. The CMS construction hall at Point 5 was converted into a gala-centre, complete with soundstage and dance floor. It was a stunning transformation that also brought to life the hall’s to-scale photo of the CMS detector. The image served as the back-drop to a light-projection show entitled “Turbulence” by artist François Moncarey (see the video). From star-singer Imogen Heap to CERN’s own Edda Gschwendtner, the line-up of speakers was as diverse as it was educational. They discussed using tangible interfaces that allow human interaction via e-devices and the potential of 3D technology as a means of revo...

The new AMS control centre

CERN Multimedia

Anaïs Schaeffer

2011-01-01

Construction work for the future AMS control room began in November 2010 and should be finished this June. The new building, which will have been completed in record time thanks to the professionalism of the project team, will soon be ready to receive the initial data from the AMS experiment.     Luigi Scibile and Michael Poehler, from the GS department, at the AMS control centre construction site.   The Alpha Magnetic Spectrometer (AMS) is due to wing its way towards the International Space Station (ISS) on board the shuttle Discovery in April. Mainly intended for research on antimatter and dark matter, the data collected by AMS will be sent to Houston in the United States and then directly to CERN’s new Building 946. Construction work for the AMS control centre building on the Route Gentner at CERN’s Prévessin site started in November 2010 and must be completed in time to receive the first data from the spectrometer in June. “It normall...

16 December 2011 - Israeli Minister of Industry, Trade and Labour S.Simhon visiting ATLAS undeground area, ATLAS visitor centre and LHC tunnel with Senior Physicist G. Mikenberg. ATLAS Collaboration Former Spokesperson is also present.

CERN Multimedia

Maximilien Brice

2011-01-01

Israeli minister of industry, trade and labour, Shalom Simhon, was welcomed in the ATLAS visitor centre before he toured the ATLAS underground experimental area, where he could see the ATLAS detector. He also had a chance to see the LHC tunnel and the CERN Control Centre.

How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors’ Controls Software

CERN Document Server

Kruk, G; Kulikova, O; Lezhebokov, V; Pace, M; Pera Mira, P; Roux, E; Wozniak, J Pawel

2014-01-01

Renovation of the control system of the CERN LHC injectors was initiated in 2007 in the scope of the Injector Controls Architecture (InCA) project. One of its main objectives was to homogenize the controls software across CERN accelerators and reuse as much as possible the existing modern sub-systems, such as the settings management used for the LHC. The project team created a platform that would permit coexistence and intercommunication between old and new components via a dedicated gateway, allowing a progressive replacement of the former. Dealing with a heterogeneous environment, with many diverse and interconnected modules, implemented using different technologies and programming languages, the team had to introduce all the modifications in the smoothest possible way, without causing machine downtime. After a brief description of the system architecture, the paper discusses the technical and non-technical sides of the renovation process such as validation and deployment methodology, operational applicatio...

LabVIEW Support at CERN

CERN Multimedia

HR Department

2010-01-01

Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

Software factory techniques applied to process control at CERN

CERN Document Server

Dutour, Mathias D

2008-01-01

The CERN Large Hadron Collider (LHC) requires constant monitoring and control of quantities of parameters to guarantee operational conditions. For this purpose, a methodology called UNICOS (UNIfied Industrial COntrols Systems) has been implemented to standardize the design of process control applications. To further accelerate the development of these applications, we migrated our existing UNICOS tooling suite toward a software factory in charge of assembling project, domain and technical information seamlessly into deployable PLC (Programmable logic Controller) - SCADA (Supervisory Control And Data Acquisition) systems. This software factory delivers consistently high quality by reducing human error and repetitive tasks, and adapts to user specifications in a cost-efficient way. Hence, this production tool is designed to encapsulate and hide the PLC and SCADA target platforms, enabling the experts to focus on the business model rather than specific syntaxes and grammars. Based on industry standard software, ...

An Industrial Control System for the Supervision of the CERN Electrical Distribution Network

CERN Document Server

Poulsen, S

1999-01-01

CERN operates a large distribution network for the supply of electricity to the particle accelerators, experiments and the associated infrastructure. The distribution network operates on voltage levels from 400 V to 400 kV with a total yearly consumption of near to 1000 GWh. In the past, the laboratory has developed an in-house control system for this network, using the technologies applied to the accelerator control system. However, CERN is now working on a project to purchase, configure and install an industrial Electrical Network Supervisor (ENS). This is a state-of-the-art industrial control system completely developed and supported by an external contractor. The system - based on a scalable and distributed architecture - will allow the installation to be performed gradually, and will be tested while the existing system is fully operational. Ultimately, the complete electrical distribution network will be supervised with this new system, the maintenance and further development of which will be the complet...

Accelerator controls at CERN: Some converging trends

International Nuclear Information System (INIS)

Kuiper, B.

1990-01-01

CERN's growing services to the high-energy physics community using frozen resources has led to the implementation of 'Technical Boards', mandated to assist the management by making recommendations for rationalizations in various technological domains. The Board on Process Control and Electronics for Accelerators, TEBOCO, has emphasized four main lines which might yield economy in resources. First, a common architecture for accelerator controls has been agreed between the three accelerator divisions. Second, a common hardware/software kit has been defined, from which the large majority of future process interfacing may be composed. A support service for this kit is an essential part of the plan. Third, high-level protocols have been developed for standardizing access to process devices. They derive from agreed standard models of the devices and involve a standard control message. This should ease application development and mobility of equipment. Fourth, a common software engineering methodology and a commercial package of application development tools have been adopted. Some rationalization in the field of the man-machine interface and in matters of synchronization is also under way. (orig.)

Accelerator controls at CERN: Some converging trends

Science.gov (United States)

Kuiper, B.

1990-08-01

CERN's growing services to the high-energy physics community using frozen resources has led to the implementation of "Technical Boards", mandated to assist the management by making recommendations for rationalizations in various technological domains. The Board on Process Control and Electronics for Accelerators, TEBOCO, has emphasized four main lines which might yield economy in resources. First, a common architecture for accelerator controls has been agreed between the three accelerator divisions. Second, a common hardware/software kit has been defined, from which the large majority of future process interfacing may be composed. A support service for this kit is an essential part of the plan. Third, high-level protocols have been developed for standardizing access to process devices. They derive from agreed standard models of the devices and involve a standard control message. This should ease application development and mobility of equipment. Fourth, a common software engineering methodology and a commercial package of application development tools have been adopted. Some rationalization in the field of the man-machine interface and in matters of synchronization is also under way.

Signatures of the Invisible at the Centre d'Art Contemporain, Geneva, 7 February - 12 May 2002. The multimedia artist Sylvie Blocher chats with Jean-Pierre Merlo (left) and Philippe Charpentier, two of the physicists from CERN she interviewed for her video.

CERN Document Server

Patrice Loïez

2002-01-01

Signatures of the Invisible at the Centre d'Art Contemporain, Geneva, 7 February - 12 May 2002. The multimedia artist Sylvie Blocher chats with Jean-Pierre Merlo (left) and Philippe Charpentier, two of the physicists from CERN she interviewed for her video.

Comparison of different cryogenic control strategies via simulation applied to a superconducting magnet test bench at CERN

Science.gov (United States)

Arpaia, P.; Coppier, H.; De Paola, D.; di Bernardo, M.; Guarino, A.; Pedemonte, B. Luz; Pezzetti, M.

2017-12-01

Industrial process controllers for cryogenic systems used in test facilities for superconducting magnets are typically PIDs, tuned by operational expertise according to users’ requirements (covering cryogenic transients and associated thermo-mechanical constraints). In this paper, an alternative fully-automatic solution, equally based on PID controllers, is proposed. Following the comparison of the operational expertise and alternative fully-automatic approaches, a new process control configuration, based on an estimated multiple-input/multiple-output (MIMO) model is proposed. The new MIMO model-based approach fulfils the required operational constraints while improving performance compared to existing solutions. The analysis and design work is carried out using both theoretical and numerical tools and is validated on the case study of the High Field Magnet (HFM) cryogenic test bench running at the SM18 test facility located at CERN. The proposed solution have been validated by simulation using the CERN ECOSIMPRO software tools using the cryogenic library (CRYOLIB [1]) developed at CERN.

Software factory techniques applied to Process Control at CERN

CERN Multimedia

Dutour, MD

2007-01-01

The CERN Large Hadron Collider (LHC) requires constant monitoring and control of quantities of parameters to guarantee operational conditions. For this purpose, a methodology called UNICOS (UNIfied Industrial COntrols Systems) has been implemented to standardize the design of process control applications. To further accelerate the development of these applications, we migrated our existing UNICOS tooling suite toward a software factory in charge of assembling project, domain and technical information seamlessly into deployable PLC (Programmable logic Controller) – SCADA (Supervisory Control And Data Acquisition) systems. This software factory delivers consistently high quality by reducing human error and repetitive tasks, and adapts to user specifications in a cost-efficient way. Hence, this production tool is designed to encapsulate and hide the PLC and SCADA target platforms, enabling the experts to focus on the business model rather than specific syntaxes and grammars. Based on industry standard software...

British Minister over the moon after visit to CERN

CERN Document Server

2008-01-01

The UK Minister for Science and Innovation, Ian Pearson MP, recently visited CERN. Ian Pearson, UK Minister for Science and Innovation (back row, third left), in the LHC tunnel with Peter Jenni, ATLAS Spokesperson (back row, centre), John Ellis (back row, third right), Simon Featherstone, UK Ambassador to Switzerland (back row, far left), Keith Mason, Chief Executive of STFC (the UK funding agency) (back row, second from right), and British scientists working at ATLAS.On the 15 April UK Minister for Science and Innovation, Ian Pearson, made his first trip to CERN. The UK is one of the founding Member States of CERN, and the British contingent is one of the largest of any country with around 650 British scientists and a further 250 staff members working here. After an introduction to the facilities by Director-General Robert Aymar, who expressed CERN’s gratitude for UK government support through its Science and Technology Facilitie...

People and things. CERN Courier, Oct 1986, v. 26(8)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-10-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Already acknowledged as the world's most versatile system of particle accelerators, CERN's complex of big machines put on a spectacular performance after the short summer shutdown. On 3 September, the new LEP Injection Linac (LIL) was put through its paces and the ejection line tested in readiness for the next step. The 1986 Dirac Medals of the International Centre for Theoretical Physics, Trieste, Italy, have been awarded to Ybichiro Nambu and Alexander Polyakov for their important contributions to mathematical physics.

People and things. CERN Courier, Oct 1986, v. 26(8)

International Nuclear Information System (INIS)

Anon.

1986-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Already acknowledged as the world's most versatile system of particle accelerators, CERN's complex of big machines put on a spectacular performance after the short summer shutdown. On 3 September, the new LEP Injection Linac (LIL) was put through its paces and the ejection line tested in readiness for the next step. The 1986 Dirac Medals of the International Centre for Theoretical Physics, Trieste, Italy, have been awarded to Ybichiro Nambu and Alexander Polyakov for their important contributions to mathematical physics

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read http://cern.ch/mail/help/?fdid=33 for more information. The Mail Services team

CERN PSB Beam Tests of CNAO Synchrotron's Digital LLRF

CERN Document Server

Angoletta, M E; De Martinis, C; Falbo, L; Findlay, A; Foglio, R; Hunt, S; Tourres, D; Vescovi, C

2008-01-01

The Italian National Centre for Oncological hAdrontherapy (CNAO), in its final construction phase, uses proton and carbon ion beams to treat patients affected by solid tumours. At the heart of CNAO is a 78- meter circumference synchrotron that accelerates particles to up to 400 MeV/u. The synchrotron relies on a digital LLRF system based upon Digital Signal Processors (DSPs) and Field Programmable Gate Array (FPGA). This system implements cavity servoing and beam control capabilities, such as phase and radial loops. Beam tests of the CNAO synchrotron LLRF system were carried out at CERN's Proton Synchrotron Booster (PSB) in autumn 2007, to verify the combined DSP/FPGA architecture and the beam control capabilities. For this, a prototype version of CNAO's LLRF system was adapted to the PSB requirements. This paper outlines the prototype system layout and describes the tests carried out and their results. In particular, system architecture and beam control capabilities were successfully proven by comparison wit...

Major Refit for CERN's 400 kV Substation

CERN Multimedia

2001-01-01

The 400 kV substation on the Prévessin site brings in the electricity that powers CERN's accelerators and the majority of the Laboratory's installations. It was originally built in the 1970s for the SPS, and is one of only five privately owned 400 kV sub-stations in France. Three of the others belong to the national railway company, SNCF, supplying the Paris-Marseilles TGV line, the other is at the Cadarache research centre near mouth of the Rhone. After nearly thirty years of service, CERN's substation has just undergone a complete overhaul. The new main 18 kV switchboard for the SPS pulsed network. The electricity supply for the original Prévessin substation was from the 400 kV EDF network, delivered through three 90 MW transformers at 18 kV to the SPS pulsed network, With the arrival of LEP, two 110 MW transformers were added to supply the new accelerator. Now, as CERN gears up for the LHC, additional pulsed power capacity is needed to supply the transfer lines carrying protons from...

Info.cern.ch returns to the Web

CERN Document Server

2006-01-01

First web address is reincarnated as a historical reference on the birth of the Web. Tim Berners-Lee, inventor of the Web, with one of the first Web pages on his computer. CERN invites you to take a virtual trip back in time and have a look at what the very first URL, which led to a revolution of the way we communicate and share information, was all about. The original web server, whose address was info.cern.ch, centred on information regarding the WorldWideWeb (WWW) project. Visitors could learn more about hypertext, technical details for creating one's own webpage, and even an explanation on how to search the Web for information-something 5 year-olds of today have mastered since it all started 17 years ago. Now info.cern.ch has been re-launched with a much brighter façade and a focus on the ideas that inspired this new wave of technology. The first browser created by Tim Berners-Lee, inventor of the Web, contained just about everything we see today on a web browser, including graphics, menus, layouts and...

An Integration Testing Facility for the CERN Accelerator Controls System

CERN Document Server

Stapley, N; Bau, J C; Deghaye, S; Dehavay, C; Sliwinski, W; Sobczak, M

2009-01-01

A major effort has been invested in the design, development, and deployment of the LHC Control System. This large control system is made up of a set of core components and dependencies, which although tested individually, are often not able to be tested together on a system capable of representing the complete control system environment, including hardware. Furthermore this control system is being adapted and applied to CERN's whole accelerator complex, and in particular for the forthcoming renovation of the PS accelerators. To ensure quality is maintained as the system evolves, and toimprove defect prevention, the Controls Group launched a project to provide a dedicated facility for continuous, automated, integration testing of its core components to incorporate into its production process. We describe the project, initial lessons from its application, status, and future directions.

6 February 2012 - Supreme Audit Institutions from Norway, Poland, Spain and Switzerland visiting the LHC tunnel at Point 5, CMS underground experimental area, CERN Control Centre and LHC superconducting magnet test hall. Delegations are throughout accompanied by Swiss P. Jenni, Polish T. Kurtyka, Spanish J. Salicio, Norwegian S. Stapnes and International Relations Adviser R. Voss. (Riksrevisjonen, Oslo; Tribunal de Cuentas , Madrid; the Court of Audit of Switzerland and Najwyzsza Izba Kontroli, Varsaw)

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

6 February 2012 - Supreme Audit Institutions from Norway, Poland, Spain and Switzerland visiting the LHC tunnel at Point 5, CMS underground experimental area, CERN Control Centre and LHC superconducting magnet test hall. Delegations are throughout accompanied by Swiss P. Jenni, Polish T. Kurtyka, Spanish J. Salicio, Norwegian S. Stapnes and International Relations Adviser R. Voss. (Riksrevisjonen, Oslo; Tribunal de Cuentas , Madrid; the Court of Audit of Switzerland and Najwyzsza Izba Kontroli, Varsaw)

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read go there for more information. The Mail Services team

Software development agreement between CERN and the Indian Department of Atomic Energy

CERN Multimedia

Patrice Loïez

2003-01-01

The development and prototyping work for the LHC computing facility is being organised as a project that includes many scientific institutes and industrial partners, coordinated by CERN. The project is nicknamed LCG (after LHC Computing Grid). Addendum No. 1 to the Protocol dated 24/09/02 to the 1991 co-operation agreement between CERN and the Department of Atomic Energy (DAE) of the Government of India defines the collaboration between CERN and DAE on software development for the LCG Prototype Project. Photo 01: Signing the addendum are G. Govindrajan (left), Director of the Electronics and Instrumentation Group at the Bhabha Atomic Research Centre, Mumbai, India and Dr. Hans Hoffmann, CERN Director for Technology Transfer and for Scientific Computing. Looking on are Christoph Eck (far left), resource manager of the LCG Project and Les Robertson, LCG Project Leader. Photo 02: (left to right) Christoph Eck, resource manager of the LCG Project; G. Govindrajan, Director of the Electronics and Instrumentation G...

Controls for the CERN large hadron collider (LHC)

International Nuclear Information System (INIS)

Kissler, K.H.; Perriollat, F.; Rabany, M.; Shering, G.

1992-01-01

CERN's planned large superconducting collider project presents several new challenges to the Control System. These are discussed along with current thinking as to how they can be met. The high field superconducting magnets are subject to 'persistent currents' which will require real time measurements and control using a mathematical model on a 2-10 second time interval. This may be realized using direct links, multiplexed using TDM, between the field equipment and central servers. Quench control and avoidance will make new demands on speed of response, reliability and surveillance. The integration of large quantities of industrially controlled equipment will be important. Much of the controls will be in common with LEP so a seamless integration of LHC and LEP controls will be sought. A very large amount of new high-tech equipment will have to be tested, assembled and installed in the LEP tunnel in a short time. The manpower and cost constrains will be much tighter than previously. New approaches will have to be found to solve many of these problems, with the additional constraint of integrating them into an existing frame work. (author)

The Control System of CERN Accelerators Vacuum (Current Status and Recent Improvements)

CERN Document Server

Gomes, P; Blanchard, S; Boccioli, M; Girardot, G; Vestergard, H; Kopylov, L; Mikheev, M

2011-01-01

The vacuum control system of most of the CERN accelerators is based on Siemens PLCs and on PVSS SCADA. After the transition from the LHC commissioning phase to its regular operation, there has been a number of additions and improvements to the vacuum control system. They were driven by new technical requirements and by feedback from the accelerator operators and vacuum specialists. New control functions have been implemented in the PLCs; new tools have been developed for the SCADA, while its ergonomics and navigation have been enhanced.

CERN LHC Technical Infrastructure Monitoring (TIM)

CERN Document Server

Epting, U; Martini, R; Sollander, P; Bartolomé, R; Vercoutter, B; Morodo-Testa, M C

1999-01-01

The CERN Large Hadron Collider (LHC) will start to deliver particles to its experiments in the year 2005. However, all the primary services such as electricity, cooling, ventilation, safety systems and others such as vacuum and cryogenics will be commissioned gradually between 2001 and 2005. This technical infrastructure will be controlled using industrial control systems, which have either already been purchased from specialized companies or are currently being put together for tender. This paper discusses the overall architecture and interfaces that will be used by the CERN Technical Control Room (TCR) to monitor the technical services at CERN and those of the LHC and its experiments. The issue of coherently integrating existing and future control systems over a period of five years with constantly evolving technology is addressed. The paper also summarizes the functionality of all the tools needed by the control room such as alarm reporting, data logging systems, man machine interfaces and the console mana...

CERN recognizes LHC suppliers with Golden Hadron awards

CERN Multimedia

Patrice Loïez

2002-01-01

The recipients of CERN's first 'Golden Hadron' awards for outstanding supplier performance are the Russian institute BINP, the Belgian firm Cockerill-Sambre and the US company Wah-Chang. LHC project leader Lyn Evans (centre) with Santo Comel of Cockerill-Sambre (left) and Lynn Davis of Wah-Chang. The third recipient, Alexander Skrinsky of the Budker Institute, was unable to attend the ceremony and will collect the Institute's award in September.

Another of CERN's many inventions!

CERN Multimedia

CERN Bulletin

2010-01-01

CERN has often been the incubator for the development of innovative technologies but very few people know about the capacitive touch screens invented for the consoles of the SPS Control Room in 1973. The Bulletin interviewed their inventor, Bent Stumpe, who also developed the CERN tracker ball and the computer-programmable knob.   Bent Stumpe, inventor of the CERN touch screens, tracker ball and programmable knob. Here we see him with one the first touch screens developed in 1973.   A specific goal, a lot of motivation and the technical skills to do it: that’s all you need to create something nobody else has ever done before. Back in the 1970s, the SPS was being built and its control room required the installation of thousands of buttons, knobs, switches and oscilloscopes to operate the machine. Frank Beck, newly recruited from the DD Division to be in charge of the central control hub in the SPS control room, asked Bent Stumpe for solutions to the following problem: how to bui...

CERN firefighters have got your back covered

CERN Multimedia

The Fire Brigade

2011-01-01

There’s not much room in the centre of a detector. Ensuring the safety of technicians who have to work on components close to the collision point is an absolute priority. With this firmly in mind, the Fire Brigade has recently acquired a back immobilisation device known as a spine splint.   CERN firefighters show off their new spine splint. Conscious of the potential safety hazards for personnel working on ALICE’s inner detectors, the collaboration’s GLIMOS, Fernando Pedrosa, asked the Fire Brigade to organise an exercise in March to simulate the emergency evacuation of a person from the centre of the detector. Despite the exceptionally limited space available in the centre of ALICE, the Fire Brigade successfully met the challenge. However, although specially designed for emergency evacuations, the cumbersome dimensions of the stretcher used in this first exercise caused many problems.   Following the exercise, the Fire Brigade therefore inves...

The role of function analysis in the ACR control centre design

International Nuclear Information System (INIS)

Leger, R.P.; Davey, E.C.

2006-01-01

An essential aspect of control centre design is the need to characterize: plant functions and their inter-relationships to support the achievement of operational goals, and roles for humans and automation in sharing and exchanging the execution of functions across all operational phases. Function analysis is a design activity that has been internationally accepted as an approach to satisfy this need. It is recognized as a fundamental and necessary component in the systematic approach to control centre design and is carried out early in the design process. A function analysis can provide a clear basis for: the control centre design for the purposes of design team communication, and customer or regulatory review, the control centre display and control systems, the staffing and layout requirements of the control centre, assessing the completeness of control centre displays and controls prior and supplementary to mock-up walkthroughs or simulator evaluations, and the design of operating procedures and training programs. This paper will explore the role for function analysis in supporting the design of the control centre. The development of the ACR control room will be used as an illustrative context for the discussion. The paper will also discuss the merits of using function analysis in a goal-or function-based approach resulting in a more robust, operationally compatible, and cost-effective design over the life of the plant. Two former papers have previously outlined, the evolution in AECL's application approach and lessons learned in applying function analysis in support of control room design. This paper provides the most recent update to this progression in application refinement. (author)

General Charles F. Bolden, Jr. and Professor Claude Nicollier reunite during visit to CERN

CERN Multimedia

Jordan Juras

2011-01-01

Thursday 23 June, CERN saw an unlikely and much savoured meeting between two old colleagues and friends: General Charles F. Bolden, Jr. and Professor Claude Nicollier.   Bolden and Nicollier were separately invited to CERN for different reasons - Charles Bolden had been invited by Professor Samuel Ting to visit the newly built and now fully operational Payload Operation and Control Centre of the AMS collaboration and Claude Nicollier had been invited by the Theory Department to give a colloquium. They were delightfully surprised when they met at the entrance of the main building. Bolden and Nicollier served together in the Space Shuttle Program and were trained by NASA during the 1980’s where they became close friends. On 24 April, 1990, Bolden piloted the Space Shuttle Discovery into orbit with the Hubble telescope in the payload bay. Though Nicollier did not accompany Bolden during the Hubble launch, he did return to the telescope 3 years later on board the Space Shuttle Ende...

Novel apparatus and methods for performing remotely controlled particle-solid interaction experiments at CERN

Science.gov (United States)

Krause, H. F.; Deveney, E. F.; Jones, N. L.; Vane, C. R.; Datz, S.; Knudsen, H.; Grafström, P.; Schuch, R.

1997-04-01

Recent atomic physics studies involving ultrarelativistic Pb ions required solid target positioners, scintillators, and a sophisticated data acquisition and control system placed in a remote location at the CERN Super Proton Synchrotron near Geneva, Switzerland. The apparatus, installed in a high-radiation zone underground, had to (i) function for months, (ii) automatically respond to failures such as power outages and particle-induced computer upsets, and (iii) communicate with the outside world via a telephone line. The heart of the apparatus developed was an Apple Macintosh-based CAMAC system that answered the telephone and interpreted and executed remote control commands that (i) sensed and set targets, (ii) controlled voltages and discriminator levels for scintillators, (iii) modified data acquisition hardware logic, (iv) reported control information, and (v) automatically synchronized data acquisition to the CERN spill cycle via a modem signal and transmitted experimental data to a remote computer. No problems were experienced using intercontinental telephone connections at 1200 baud. Our successful "virtual laboratory" approach that uses off-the-shelf electronics is generally adaptable to more conventional bench-type experiments.

Experience with procuring, deploying and maintaining hardware at remote co-location centre

International Nuclear Information System (INIS)

Bärring, O; Bonfillou, E; Clement, B; Santos, M Coelho Dos; Dore, V; Gentit, A; Grossir, A; Salter, W; Valsan, L; Xafi, A

2014-01-01

In May 2012 CERN signed a contract with the Wigner Data Centre in Budapest for an extension to CERN's central computing facility beyond its current boundaries set by electrical power and cooling available for computing. The centre is operated as a remote co-location site providing rack-space, electrical power and cooling for server, storage and networking equipment acquired by CERN. The contract includes a 'remote-hands' services for physical handling of hardware (rack mounting, cabling, pushing power buttons, ...) and maintenance repairs (swapping disks, memory modules, ...). However, only CERN personnel have network and console access to the equipment for system administration. This report gives an insight to adaptations of hardware architecture, procurement and delivery procedures undertaken enabling remote physical handling of the hardware. We will also describe tools and procedures developed for automating the registration, burn-in testing, acceptance and maintenance of the equipment as well as an independent but important change to the IT assets management (ITAM) developed in parallel as part of the CERN IT Agile Infrastructure project. Finally, we will report on experience from the first large delivery of 400 servers and 80 SAS JBOD expansion units (24 drive bays) to Wigner in March 2013. Changes were made to the abstract file on 13/06/2014 to correct errors, the pdf file was unchanged.

The control system of CERN accelerators vacuum (current status and recent improvements)

International Nuclear Information System (INIS)

Gomes, P.; Antoniotti, F.; Blanchard, S.; Boccioli, M.; Girardot, G.; Vestergard, H.; Kopylov, L.; Mikheev, M.

2012-01-01

The vacuum control system of most of the CERN accelerators is based on Siemens PLCs and on PVSS SCADA. After the transition from the LHC commissioning phase to its regular operation, there has been a number of additions and improvements to the vacuum control system. They were driven by new technical requirements and by feedback from the accelerator operators and vacuum specialists. New control functions have been implemented in the PLCs; new tools have been developed for the SCADA, while its ergonomic and navigation have been enhanced. (authors)

CERN takes part in the GE200.CH celebrations | 30 May - 1 June

CERN Multimedia

2014-01-01

Come and discover the universe of CERN at the Mont Blanc rotunda during a weekend of celebrations marking the 200th anniversary of the arrival of the confederate troops at Geneva’s Port Noir.   CERN will also be taking part in the procession through the city centre from 2.30 p.m. to 5.00 p.m. on Saturday 31 May. Starting at the Parc des Bastions, the procession will pass through the Rues Basses and along the lake to the Port Noir. More information on this event here.  

The Upgrade of the Control System for the CERN/NA62 Liquid Krypton Detector

CERN Document Server

Moraux, A; Bremer, J; Falaleev, V; Gonidec, A; Passardi, Giorgio; Pezzetti, M

2009-01-01

The NA62 experiment is a continuation of the CERN kaon research program and particularly of the NA48 experiment which was designed in the early 90’s to measure the direct CP violation with a very high precision. An important component of the experimental setup is an electromagnetic calorimeter filled with 9000 liters of high-purity liquid krypton at 120 K. Its associated cryogenic system aims at providing a very high reliability and stable thermal conditions with temperature stabilization better than 0.1 K. The upgrade of the cryogenic control system was motivated by the need of ensuring its durability and standardization for the long term fixed-target physics program at the CERN Super Proton Synchrotron (SPS). This paper describes the adopted technical solutions to minimize the control shutdown and emphasizes the related safety issues.

People and thing. CERN Courier, Nov 1986, v. 26(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-11-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The design current of 1 ampere was achieved this summer at the 750 MeV vacuum ultra-violet storage ring of the US National Synchrotron Light Source at Brookhaven. The next International Symposium on Lepton and Photon Interactions at High Energies will be held in Hamburg, West Germany, from 27-31 July 1987. The second Lake Louise Winter Institute will be held from 16-22 February at Chateau Lake Louise, Canada.; The 32nd Scottish Universities' Summer School in Physics will be held from 9-29 August 1987 at the University of St. Andrews. Earlier this year an exhibition of photographs of great beauty was presented at CERN on the invitation of the Staff Association. Following the success of the Symposium on Cosmology, Astronomy and Particle Physics organized jointly by CERN and the European Southern Observatory (ESO), now a regular feature of the physics international physics calendar, ESO and CERN are organizing an International School on Astro-Particle Physics at the Ettore Majorana Centre for Scientific Culture, Erice, Sicily, from 5-25 January.

Process equipment data organisation in CERN PS controls

International Nuclear Information System (INIS)

Casalegno, L.; Cuperus, J.; Sicard, C.H.

1990-01-01

The CERN PS control system has a widely distributed architecture, mainly for fast response in a real-time environment. The organisation of the data for equipment access must be compatible with this architecture and give efficient program access to the data. Moreover, it must also offer managerial features such as data integrity, easy backup and restoration, adaptibility to changes in data structure, initialisation, data-entry facilities and automatic documentation. This paper shows how one can take advantage of a commercial data-base management system with its associated tools, adding to it some object-oriented programming concepts to meet the objectives of a manageable distributed data organisation having good run-time performance features and using a reasonable manpower investment. (orig.)

Helix Nebula: sunshine and clouds on the CERN computing horizon

CERN Multimedia

Joannah Caborn Wengler

2012-01-01

23 petabytes is how much data CERN recorded during 2011, and this number will rise in 2012. In order to respond to the challenge, the IT department is upping its game, amongst other things by participating in the Helix Nebula project, a public-private partnership to create a European cloud-computing platform, as announced in a recent CERN press release.   “We’re not replacing the Grid,” clarifies Bob Jones, responsible for CERN openlab who is also responsible for EC-funded projects in IT, “but looking at three complementary ways of increasing CERN’s computing capacity, so that as demand goes up we can continue to satisfy our users.” “First we are upgrading the electrical and cooling infrastructure of the computer centre in order to increase the availability of critical IT services needed for the Laboratory. This will also provide more floor space in the area called The Barn, allowing for more servers to fit in.”...

CHT, CERN HIPPI Testbox

CERN Multimedia

1990-01-01

To allow CERN to test and maintain HIPPI equipment (High Performance Parallel Interface), a powerful test falcility is required. A tester has been developed at Los Alamos National Laboratories [9,10]. The CERN HIPPI testbox allows testing of HIPPI equipment both inside and outside the specifications. This includes the possibility of deliberately introducing errors. The main features of this testbox are: Manual set-up Processor controlled set-up Possibilities for remote analysis Checking the HIPPI specifications Checking illegal conditions

International research centre launched

International Nuclear Information System (INIS)

1965-01-01

Full text: The first scientific research and educational institution to be set up on a completely international basis was officially inaugurated in Trieste on 5 October 1964 by the Director General of IAEA, Dr. Sigvard Eklund, when he opened the first seminar of the International Centre for Theoretical Physics. As evidence of the international nature of the institution he noted that the scientists who would work and teach there during the first year represented sixteen different countries. By the end of 1964, the Centre building was nearing completion and three of the five floors were occupied. A successful symposium had been held on the subject of plasma physics, and a score of professors and fellows were at work, from Bulgaria, Czechoslovakia, Greece, India, Japan, Jordan, the Netherlands, Norway, Pakistan, Poland, the United Kingdom, and the United States. A dozen scientific papers had been issued as preprints. The main purpose of the Centre is to foster the advancement of theoretical physics through training and research; at first the chief subject will be high-energy and elementary particle physics. Plasma physics, low energy physics and solid-state physics will also be dealt with. Special attention is paid to the needs of the developing countries. Of the 25 fellows selected for the academic year 1964-65, more than half are from South America, Africa and Asia. In conjunction with the Research Centre, there is an Advanced School for theoretical Physics to provide graduate training for fellows who need such preparation before they embark upon research. The Centre works under the guidance of a Scientific Council comprising the president, Prof. M. Sandoval-Vallarta (Nuclear Energy Commission of Mexico); Prof. A. Abragam (Saclay, France); Prof. R. Oppenheimer (Institute for Advanced Study, Princeton, USA); Dr. V. Soloviev (Dubna, USSR); Prof V.F. Weiskopf (Director General, CERN) ; Prof Abdus Salam (Imperial College, London) ; Prof. P. Budini (University of Trieste

An Open Day at CERN

CERN Multimedia

Burckhart, H; Schmid, P; Schuh, S

Celebrating its 50 years of existence, its achievements and to communicate its plans for the future, CERN is organizing an "Open Day" on Saturday 16 October 2004. This will be a major event for CERN's public relations; some 10000 visitors from near and far are expected to follow CERN's invitation. ATLAS has to, and will, play its role on this occasion. A small group of people (H. Burckhart, C. Potter, P. Schmid and S. Schuh) from the CERN ATLAS Team is acting as interface to CERN's organizing committee. This is all done in close collaboration with the ATLAS Outreach Coordinators. According to our present plans ATLAS will organize three visit sites: - The ATLAS "headquarters" will be in the future ATLAS control room at the pit. We shall show films (ATLAS specific and general HEP), distribute information material, sell our scarves, ties, T-shirts and watches, explain ATLAS in as many languages as we can and - most likely the major attraction - give the visitors the possibility to go down into the cavern. - ...

Assessment of individual doses and intervention planning at CERN

International Nuclear Information System (INIS)

Brugger, M.; Forkel-Wirth, D.; Gaborit, J.C.; Menzel, H.; Roesler, S.

2006-01-01

Founded in 1954, CERN is the European Organization for Nuclear Research, one of the world's largest international particle physics centres. It sits astride the Franco-Swiss border near Geneva. The Large Hadron Collider (LHC) is currently being installed in a 27-kilometer ring tunnel, buried deep below the countryside on the outskirts of Geneva, Switzerland and the Pays de Gex, France. When its operation begins in 2007, the LHC will be the world's most power particle accelerator. The start-up and the operation of the LHC will mark a new era for CERN's operational radiation protection. The total surface of CERN's radiation areas will enlarge significantly and a large number of work places have to be regularly monitored by CERN's radiation protection group. The maintenance personnel will comprise CERN staff, outside contractors and a large number of physicists from all over the world. CERN meets this challenge by applying optimisation processes already in the design of accelerator and detector components and by an appropriate intervention and dose planning during operation. Detailed Monte Carlo calculations were performed during the design phase of the LHC and were used to identify the potential radiation hazards during future maintenance in areas with elevated beam losses (accelerator ejection and injection, beam dumps, target areas or beam cleaning insertions) and thus elevated dose rates. In an iterative way, the design of the accelerator components and the layout of these regions were optimised. The impact of the proposed modifications on the dose to personnel was evaluated by Monte Carlo simulations. Calculated individual and collective doses were then compared to design constraints. (author)

Assessment of Individual Doses and Intervention Planning at CERN

International Nuclear Information System (INIS)

Brugger, M.; Forkel-Wirth, D.; Gaborit, J.C.; Menzel, H.; Roesler, S.; Vincke, H.

2006-01-01

Founded in 1954, CERN is the European Organization for Nuclear Research, one of the world's largest international particle physics centres. It sits astride the Franco-Swiss border near Geneva. The Large Hadron Collider (Lhc) is currently being installed in a 27-kilometer ring tunnel, buried deep below the countryside on the outskirts of Geneva, Switzerland and the Pays de Gex, France. When its operation begins in 2007, the Lhc will be the world's most powerful particle accelerator. The start-up and the operation of the Lhc will mark a new era for CERN's operational radiation protection. The total surface of CERN's radiation areas will enlarge significantly and a large number of work places have to be regularly monitored by CERN's radiation protection group. The maintenance personnel will comprise CERN staff, outside contractors and a large number of physicists from all over the world. CERN meets this challenge by applying optimisation processes already in the design of accelerator and detector components and by an appropriate intervention and dose planning during operation. Detailed Monte Carlo calculations were performed during the design phase of the Lhc and were used to identify the potential radiation hazards during future maintenance in areas with elevated beam losses (accelerator ejection and injection, beam dumps, target areas or beam cleaning insertions) and thus elevated dose rates. In an iterative way, the design of the accelerator components and the layout of these regions were optimised. The impact of the proposed modifications on the dose to personnel was evaluated by Monte Carlo simulations. Calculated individual and collective doses were then compared to design constraints. (authors)

Status of the Medaustron Ion Beam Therapy centre

CERN Document Server

Dorda, U; Osmic, F; Benedikt, M

2012-01-01

MedAustron is a synchrotron based light-ion beam therapy centre for cancer treatment as well as for clinical and non-clinical research currently in its construction phase. The accelerator design is based on the CERN-PIMMS study and its technical implementation by CNAO. This paper presents a status overview over the whole project detailing the achieved progress of the building construction & technical infrastructure installation in Wiener Neustadt, Austria, as well as of the accelerator development, performed at CERN and partially at PSI. The design and procurement status and future planning of the various accelerator components is elaborated.

Restrictions on running IRC (Internet Relay Chat) at CERN

CERN Multimedia

2005-01-01

Due to the large number of computer security incidents at CERN where intruders have used IRC (Internet Relay Chat) software to control computers, IRC connections will be blocked in the CERN firewall from 1st February 2005. Personal use of IRC software is not permitted at CERN. Further details of the restrictions on both personal and professional use of IRC are documented at http://cern.ch/security/IRC.

Swedish Government Minister at CERN

CERN Document Server

2008-01-01

The Swedish Minister for Higher Education and Research recently visited CERN. The Swedish Minister was greeted by Swedish scientists working at CERN. Signing of the Swedish Computing Memorandum of Understanding. Pär Omling, Director-General of the Swedish Research Council (left), and Jos Engelen, CERN’s Chief Scientific Officer. Lars Leijonborg, the Swedish Minister for Higher Education and Research, was welcomed to CERN by Director-General Robert Aymar on 10 March. After an introduction to the Laboratory’s activities, the Minister was given guided tours of the control room, the ATLAS surface hall and experiment cavern and the adjoining LHC tunnel. Mr Leijonborg was then greeted by Swedish scientists and given an overview of the Swedish research programme at CERN. Five Swedish university groups are taking part in LHC research. Swedish universities are notably involved in the manufacture of parts for the sub-detectors of AT...

Changements à la tête du CERN - Robert Aymar aux commandes pour 5 ans.

CERN Multimedia

2003-01-01

"Une nouvelle équipe prendra les rênes du CERN à partir du 1er janvier. Le Francais Robert Aymar, anciennement directeur du Projet de reacteur thermonucleaire experimental international (ITER), dirigera le centre de recherche pour la periode 2004-2008" (1 page).

14 medals for the CERN Ski Club

CERN Multimedia

Anaïs Schaeffer

2011-01-01

From 22 to 29 January, the ski resort of La Clusaz in Haute Savoie hosted the 11th Winter Atomiades. With nine gold medals and four silver medals in cross-country skiing, and a bronze medal in downhill skiing, the team from the CERN Ski Club finished third in the medals table.   Group photo at the 2011 Atomiades Organised by the Association of Sports Communities of European Research Institutes, nearly 260 participants from 15 research centres throughout Europe competed against each other in this skiing event. Each in their own discipline and age category, the fourteen members of the CERN team defended the colours of the Organization in the spirit of fun and fair play: “I had a really good week,” explained Simone Campana from the IT Department. “There was a great atmosphere. I’m only sorry that there was no general ranking this year. Let’s hope they’ll think about having one next time!” Despite the competition, the event is ...

Training course for eighteen teachers at CERN

CERN Multimedia

Laurianne Noemie Trimoulla

2015-01-01

From 8 to 10 December, 18 teachers from all over France attended a three-day training course on matter, organised by the LAMAP Foundation (Fondation La main à la pâte, see here) and hosted by CERN and S'Cool Lab. The LAMAP Foundation, set up by Georges Charpak in 1995, aims to help primary school teachers use the investigative process to instil the scientific spirit in their pupils.      Fired by curiosity and eager to learn, the teachers were introduced to the many and varied activities on offer at CERN, including the cloud chamber experiment, the Masterclass programme and the "Be a physicist" learning scheme. They particularly enjoyed their tours of Microcosm, the Synchrocyclotron and the ATLAS visitor centre, which stimulated many questions. They are eagerly looking forward to passing on their newly found knowledge to their pupils and perhaps even inspiring some to take up a career in physics! Last but not least, they were treat...

Britain at CERN

CERN Multimedia

2000-01-01

H. E. Mr Christopher Hulse, Ambassador of United Kingdom in Switzerland, CERN Director General Luciano Maiani, Sir David Wright, Chief Executive of British Trade International and Roger Cashmore, CERN Director of research visit the Britain at CERN exhibition. From 14 to 17 November 30 British companies exhibited leading edge technologies at CERN. This is Britain's 18th exhibition at CERN since 1968. Out of the 30 companies, which attended the Britain at CERN exhibition in 1998, 25 have received an order or a contract relating to CERN during the last two years. The exhibition was inaugurated on Tuesday by Sir David Wright, Chief Executive of British Trade International. He was accompanied by H.E. Mr Christopher Hulse CMG, OBE, Her Majesty's Ambassador to Switzerland, and Mr. David Roberts, Deputy Head of Mission and Director of Trade Promotion at the British Embassy in Bern. CERN Director-General, Professor Luciano Maiani, underlined the major contribution of British physicists to CERN, pointing out the fact ...

People and things. CERN Courier, May 1987, v. 27(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1987-05-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The XIX General Assembly of the International Union of Pure and Applied Physics (IUPAP) is to be held at the US National Academy of Sciences, Washington DC, from 29 September - 3 October. The theme of the scientific programme will be 'Physics in a Technological World', reflecting the IUPAP General Council's aim of emphasizing the role of industrial physics and improving relations between industrial and academic physics. The CERN Accelerator School is organizing in collaboration with BESSY (the Berlin electron synchrotron radiation centre) the second of its biennial two-week courses on advanced accelerator physics.

People and things. CERN Courier, May 1987, v. 27(4)

International Nuclear Information System (INIS)

Anon.

1987-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The XIX General Assembly of the International Union of Pure and Applied Physics (IUPAP) is to be held at the US National Academy of Sciences, Washington DC, from 29 September - 3 October. The theme of the scientific programme will be 'Physics in a Technological World', reflecting the IUPAP General Council's aim of emphasizing the role of industrial physics and improving relations between industrial and academic physics. The CERN Accelerator School is organizing in collaboration with BESSY (the Berlin electron synchrotron radiation centre) the second of its biennial two-week courses on advanced accelerator physics

CERN runners scale new heights

CERN Multimedia

2002-01-01

Part of the field in the men's over-50 categories. Gordon Lee (IT) is in the white top, just behind the runner in yellow in the centre of the photo. On a bright and sunny 1 December last, a team from CERN lifted the honours for the company team event of Switzerland's most popular running race. The occasion was the 24th 'Course de l'Escalade'. The Escalade races wind through the narrow streets of Geneva's Old Town, lined with friends and well-wishers for the event. Since they began in 1978, they have become so popular that the Escalade now ranks among the largest popular running events in Europe. Some 19000 people aged from 5 to 85 donned running shoes to brave the crowds last December. Clearly, not all could run at once, so races by category started at 11am and continued until after 7pm. Distances ranged from about 2 km for the youngest children to 7.5 km for the men's categories. 100 or so runners, men and women, from the top international elite were invited for the race. CERN runners had a double reason t...

Angular distribution of Pionization particles from experiments on CERN-storage rings

CERN Document Server

Jabs, A

1972-01-01

The angular distribution of secondary charged particles arising from high energy interaction in the CERN storage rings has been measured. The measurements near the centre-of-mass energies (20-50) GeV have been taken in the angle range of 20-90 degrees relative to the recoil axis. A complex formula is suggested to explain the variations described experimentally. Good agreement between the theoretical and experimental data is found. Simplifications are possible in the formula which allow the two-centre emission structure to be explained. It is shown that the angular dependence cannot be explained solely from rotary impulse behaviour. (9 refs).

3rd August 2010 - CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt, signing the guest book with CERN Director-General R. Heuer

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1008148 11: H. von Dewitz in the ATLAS Visitor centre with Collaboration member M. Hauschild (left) and Former IT Department Head W. von Rüden (right) CERN-HI-1008148 18 : Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid (left) in the ATLAS Visitor centre with Collaboration member M. Hauschild. CERN-HI-1008148: in the ATLAS visitor centre, from left to right: Former IT Department Head W. von Rüden; ATLAS Collaboration P. Mättig; CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt; Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid; H. von Dewitz; ATLAS Collaboration member M. Hauschild.

The New Modular Control System for Power Converters at CERN

CERN Document Server

Di Cosmo, Matteo

2015-01-01

The CERN accelerator complex consists of several generations of particle accelerators, with around 5000 power converters supplying regulated current and voltage to normal and superconducting magnet circuits. Today around 12 generations of converter control platforms can be found in the accelerator complex, ranging in age and technology. The diversity of these platforms has a significant impact on operability, maintenance and support of power converters. Over the past few years a new generation of modular controls called RegFGC3 has been developed by CERN’s power conversion group, with a goal to provide a standardised control platform, supporting a wide variety of converter topologies. The aim of this project is to reduce maintenance costs by decreasing the variety and diversity of control systems whilst simultaneously improving the operability and reliability of power converters and their controls. This paper describes the state of the on-going design and realization of the RegFGC3 platform, focusing on fun...

People and things. CERN Courier, Dec 1986, v. 26(10)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-12-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: The recently-formed Instrumentation Panel of the International Committee for Future Accelerators (ICFA), together with the International Centre for Theoretical Physics, Trieste, is organizing a School on Instrumentation in Particle Physics, to be held in Trieste from 8-19 June.

People and thing. CERN Courier, Nov 1986, v. 26(9)

International Nuclear Information System (INIS)

Anon.

1986-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The design current of 1 ampere was achieved this summer at the 750 MeV vacuum ultra-violet storage ring of the US National Synchrotron Light Source at Brookhaven. The next International Symposium on Lepton and Photon Interactions at High Energies will be held in Hamburg, West Germany, from 27-31 July 1987. The second Lake Louise Winter Institute will be held from 16-22 February at Chateau Lake Louise, Canada.; The 32nd Scottish Universities' Summer School in Physics will be held from 9-29 August 1987 at the University of St. Andrews. Earlier this year an exhibition of photographs of great beauty was presented at CERN on the invitation of the Staff Association. Following the success of the Symposium on Cosmology, Astronomy and Particle Physics organized jointly by CERN and the European Southern Observatory (ESO), now a regular feature of the physics international physics calendar, ESO and CERN are organizing an International School on Astro-Particle Physics at the Ettore Majorana Centre for Scientific Culture, Erice, Sicily, from 5-25 January

New concepts of control centre design and development

International Nuclear Information System (INIS)

Dittmar, E.; Kiersch, J.J.; Schmudlach, U.; Weihrauch, J.

1977-02-01

The concept of modern control centre technology is shown, its realization at project including the supervision of an electric power distribution system is described. A modern control centre is characterized by the fact that the conventional control elements are more and more replaced by elements of computer technology, i.e. computer and displays. The different functions implemented by hard- and software set new standards relative to flexibility, adaptability, dimensioning. The communication interface man/process is defined and designed in a new way allowing dynamic and more efficent supervisionstrategy of technical processes via display in different operation modes. Special attention is paid to adjustments and extensions of process elements and their integration into the supervised network. (orig./WB) [de

30 CERN

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-11-15

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers.

Improved operability of the CANDU 9 control centre

International Nuclear Information System (INIS)

Macbeth, M. J.; Webster, A.

1996-01-01

The next generation CANDU nuclear power plant being designed by AECL is the 900 MWe class CANDU 9 station. It is based upon the Darlington CANDU station design which is among the world leaders in capacity factor with low Operation, Maintenance and Administration (OM and A) costs. This Control Centre design includes the proven functionality of existing CANDU control centres (including the Wolsong 2,3, and 4 control centre improvements, such as the Emergency Core Cooling panels), the characteristics identified by systematic design with human factors analysis of operations requirements and the advanced features needed to improve station operability which is made possible by the application of new technology. The CANDU 9 Control Centre provides plant staff with an improved operability capability due to the combination of proveness, systematic design with human factors engineering and enhanced operating features. Significant features which contribute to this improved operability include: · Standard NSP, BOP and F/H panels with controls and indicators integrated by a standard display/presentation philosophy. · Common plant parameter signal database for extensive monitoring, checking, display and annunciation. · Powerful annunciation system allowing alarm filtering, prioritizing and interrogation to enhance staff recognition of events, plant state and required corrective procedural actions. · The use of an overview display to present immediate and uncomplicated plant status information to facilitate operator awareness of unit status in a highly readable and recognizable format. · Extensive cross checking of similar process parameters amongst themselves, with the counterpart safety system parameters and as well as with 'signature' values obtained from known steady state conditions. · Powerful calculation capabilities, using the plant wide database, providing immediate recognizable and readable and readable output data on plant state information and plant state change

People and things. CERN Courier, Dec 1984, v. 24(10)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-12-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With the primary goal of exploiting the new Tevatron facilities for physics, Fermilab Director Leon Lederman has announced a management reshuffle, effective from 1 October. The first 550 MeV proton bunches have been successfully extracted from the new Spallation Neutron Source at the Rutherford Appleton Laboratory, UK, at the first attempt.Lee Teng of Fermilab has been appointed Director of Taiwan's recently founded $30 million Synchrotron Radiation Research Centre, the island's first major large scale research project. A Protocol on cooperation between CERN and the Chinese Academy of Sciences was signed at CERN on 18 October by Zhao Guangzhao, a Vice-President of the Academy, and CERN Director General Herwig Schopper. The next Particle Accelerator Conference will be held in Vancouver, Canada, from 13-16 May 1985, organized by the TRIUMF Laboratory. Following the 1983 Santa Fe Conference, it will be the 11th in this biennial series devoted to all aspects of accelerator science, engineering and technology. From 3-14 September, the CERN Accelerator School organized (jointly with the Laboratoire de l'Accélérateur Linéaire, Orsay and the Laboratoire National Saturne, Saclay) a course on General Accelerator Physics at the Ecole Supérieure d'Electricité, Gif-sur-Yvette.

People and things. CERN Courier, Dec 1984, v. 24(10)

International Nuclear Information System (INIS)

Anon.

1984-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With the primary goal of exploiting the new Tevatron facilities for physics, Fermilab Director Leon Lederman has announced a management reshuffle, effective from 1 October. The first 550 MeV proton bunches have been successfully extracted from the new Spallation Neutron Source at the Rutherford Appleton Laboratory, UK, at the first attempt.Lee Teng of Fermilab has been appointed Director of Taiwan's recently founded $30 million Synchrotron Radiation Research Centre, the island's first major large scale research project. A Protocol on cooperation between CERN and the Chinese Academy of Sciences was signed at CERN on 18 October by Zhao Guangzhao, a Vice-President of the Academy, and CERN Director General Herwig Schopper. The next Particle Accelerator Conference will be held in Vancouver, Canada, from 13-16 May 1985, organized by the TRIUMF Laboratory. Following the 1983 Santa Fe Conference, it will be the 11th in this biennial series devoted to all aspects of accelerator science, engineering and technology. From 3-14 September, the CERN Accelerator School organized (jointly with the Laboratoire de l'Accélérateur Linéaire, Orsay and the Laboratoire National Saturne, Saclay) a course on General Accelerator Physics at the Ecole Supérieure d'Electricité, Gif-sur-Yvette

The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers

CERN Document Server

Schipper, J; Boucly, C; Carlier, E; Fowler, T; Gaudillet, H; Noulibos, R; Sermeus, L

2010-01-01

To reduce the beam losses when preparing high intensity proton beam for the CERN Neutrino to Gran Sasso (CNGS) facility, a new Multi-Turn extraction (MTE) scheme has been implemented in the PS, to replace the present Continuous Transfer (CT) to the SPS. Industrial off-the-shelf components have been used for the low-level part of the MTE kicker control system. National Instruments PXI systems are used to control the high voltage pulse generators and a SIEMENS programmable logic controller (PLC) handles the centralised oil cooling and gas insulation sub-systems

11 July 2011 - Carleton University Ottawa, Canada Vice President (Research and International) K. Matheson in the ATLAS visitor centre with Collaboration Spokesperson F. Gianotti, accompanied by Adviser J. Ellis and signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci.

CERN Multimedia

Jean-Claude Gadmer

2011-01-01

11 July 2011 - Carleton University Ottawa, Canada Vice President (Research and International) K. Matheson in the ATLAS visitor centre with Collaboration Spokesperson F. Gianotti, accompanied by Adviser J. Ellis and signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci.

Britain's delegation to CERN, the European Centre for Nuclear Research near Geneva, voted in favour of a project which take seven years to build, involve a 27 kilometre long tunnel, and cost 230 million pounds. Now LEP receives the go-ahead later this month

CERN Multimedia

Llewellyn Smith, Christopher Hubert

1981-01-01

Britain's delegation to CERN, the European Centre for Nuclear Research near Geneva, voted in favour of a project which take seven years to build, involve a 27 kilometre long tunnel, and cost 230 million pounds. Now LEP receives the go-ahead later this month

Experiences constructing and running large shared clusters at CERN

International Nuclear Information System (INIS)

Bahyl, V.; Barroso, M.; Charbonnier, C.; Eldik, J. van; Jones, P.; Kleinwort, T.; Smith, T.

2001-01-01

The latest steps in the steady evolution of the CERN Computer Centre have been to reduce the multitude of clusters and architectures and to concentrate on commodity hardware. An active RISC decommissioning program has been undertaken to encourage migration to Linux, and a program of merging dedicated experiment clusters into larger shared facilities has been launched. The authors describe these programs and the experiences running the resultant multi-hundred node shared Linux clusters

Bienvenue au CERN !

CERN Multimedia

CERN Press Office. Geneva

1998-01-01

CERN, the Laboratory which invented the World-Wide Web has re-invented its public Web site. The new face of CERN has gone live at http://www.cern.ch/ Public . CERN's new Web pages have been designed to give visitors an informative introduction to the fascinating world of particle physics. For those whose whirl around the Web only allows a short stop, there's the 'CERN in two minutes' page.

CERN Rocks

CERN Multimedia

2004-01-01

The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

Go on a particle quest at the first CERN webfest

CERN Multimedia

Andrew Purcell

2012-01-01

From 3 to 5 August, CERN played host to its very first webfest. Organised by the Citizen Cyberscience Centre (CCC) and the Peer 2 Peer University, the 2012 CERN Webfest saw pizza-fuelled summer students hacking their way almost non-stop through an entire weekend to produce a host of weird and wonderful innovations. As each of the teams raced against time in the hope of winning the grand prize of a trip to the Mozilla festival in London, sleep was hard for the students to come by, but fortunately great ideas were not.   Particle quest sprites. Source: André-Pierre Olivier. Projects dreamt up by the students included a browser-based dashboard for the Large Hadron Collider (LHC), a new CERN open-data initiative, and a virtual world for the LHC@home platform.  However, the highlight of the event was the ParticleQuest game, which was selected by a panel of judges as the weekend’s overal...

CERN Choir

CERN Multimedia

Staff Association

2015-01-01

  Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

30 CERN

International Nuclear Information System (INIS)

Anon.

1984-01-01

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers

The Safety Training Centre is also used for recruitment

CERN Multimedia

Antonella Del Rosso

2014-01-01

The Safety Training Centre on the Prévessin site boasts not only a life-sized mock-up of the LHC accelerator but also a number of other simulators, such as those used for electrical work certification (“habilitation électrique"). What better place to test the technical competencies of candidates applying for a job in the CERN Fire Brigade?     Instructors put the technical competencies of candidates applying for positions in the CERN Fire Brigade to the test in the tunnel that houses the LHC mock-up.   On 4 and 5 November, the Fire and Rescue Service’s facilities were used for the first time by the selection committee for a staff position. This gave candidates the chance to show their abilities and physical fitness in practice. CERN’s Safety Training Centre, which was fitted with a mock-up of the LHC in 2013, is becoming more and more widely used: by the Fire Brigade for their professional training sessions, incl...

A system level boundary scan controller board for VME applications [to CERN experiments

CERN Document Server

Cardoso, N; Da Silva, J C

2000-01-01

This work is the result of a collaboration between INESC and LIP in the CMS experiment being conducted at CERN. The collaboration addresses the application of boundary scan test at system level namely the development of a VME boundary scan controller (BSC) board prototype and the corresponding software. This prototype uses the MTM bus existing in the VME64* backplane to apply the 1149.1 test vectors to a system composed of nineteen boards, called here units under test (UUTs). A top-down approach is used to describe our work. The paper begins with some insights about the experiment being conducted at CERN, proceed with system level considerations concerning our work and with some details about the BSC board. The results obtained so far and the proposed work is reviewed in the end of this contribution. (11 refs).

CERN and the Hunt for Elementary Particles and Forces

CERN Document Server

AUTHOR|(CDS)2051276

2008-01-01

CERN is the European Laboratory for Particle Physics, the world's largest particle physics research centre. Founded in 1954, the Laboratory was one of Europe's first joint ventures and has become a premier example of international collaboration. CERN's subject of study is pure science and is concentrated on exploring the Universe's most fundamental questions, such as What is it made of? and How did it come to be the way it is? The Laboratory's tools, the particle accelerators and particle detectors, are amongst the world's largest and most complex scientific instruments. The Laboratory's primary aims will be presented and a look at past achievements and present endeavours, particularly the Large Hadron Collider (LHC), will be reviewed. A brief look into the future will also be given.

ATLAS copies its first PetaByte out of CERN

CERN Multimedia

M. Branco; P. Salgado; L. Goossens; A. Nairz

2006-01-01

On 6th August ATLAS reached a major milestone for its Distributed Data Management project - copying its first PetaByte (1015 Bytes) of data out from CERN to computing centers around the world. This achievement is part of the so-called 'Tier-0 exercise' running since 19th June, where simulated fake data is used to exercise the expected data flow within the CERN computing centre and out over the Grid to the Tier-1 computing centers as would happen during the real data taking. The expected rate of data output from CERN when the detector is running at full trigger rate is 780 MB/s shared among 10 external Tier-1 sites(*), amounting to around 8 PetaBytes per year. The idea of the exercise was to try to reach this data rate and sustain it for as long as possible. The exercise was run as part of the LCG's Service Challenges and allowed ATLAS to test successfully the integration of ATLAS software with the LCG middleware services that are used for low level cataloging and the actual data movement. When ATLAS is produ...

Managing a tier-2 computer centre with a private cloud infrastructure

International Nuclear Information System (INIS)

Bagnasco, Stefano; Berzano, Dario; Brunetti, Riccardo; Lusso, Stefano; Vallero, Sara

2014-01-01

In a typical scientific computing centre, several applications coexist and share a single physical infrastructure. An underlying Private Cloud infrastructure eases the management and maintenance of such heterogeneous applications (such as multipurpose or application-specific batch farms, Grid sites, interactive data analysis facilities and others), allowing dynamic allocation resources to any application. Furthermore, the maintenance of large deployments of complex and rapidly evolving middleware and application software is eased by the use of virtual images and contextualization techniques. Such infrastructures are being deployed in some large centres (see e.g. the CERN Agile Infrastructure project), but with several open-source tools reaching maturity this is becoming viable also for smaller sites. In this contribution we describe the Private Cloud infrastructure at the INFN-Torino Computer Centre, that hosts a full-fledged WLCG Tier-2 centre, an Interactive Analysis Facility for the ALICE experiment at the CERN LHC and several smaller scientific computing applications. The private cloud building blocks include the OpenNebula software stack, the GlusterFS filesystem and the OpenWRT Linux distribution (used for network virtualization); a future integration into a federated higher-level infrastructure is made possible by exposing commonly used APIs like EC2 and OCCI

A PC based control system for the CERN ISOLDE separators

International Nuclear Information System (INIS)

Billinge, R.; Bret, A.; Deloose, I.; Pace, A.; Shering, G.

1992-01-01

The control system of the two isotope separators of CERN, named ISOLDE, is being completely redesigned with the goal of having a flexible, high performance and inexpensive system. A new architecture that makes heavy use of the commercial software and hardware available for the huge Personal Computer (PC) market is being implemented on the 1700 geographically distributed control channels of the separators. 8 MS-DOS TM i386-based PCs with about 80 acquisition/control boards are used to access the equipments while 3 other PCs running Microsoft Windows TM and Microsoft Excel TM are used as consoles, the whole through a Novell TM Local Area Network with a PC Disk Server used as a database. This paper describes the interesting solutions found and discusses the reduced programming work load and costs that are expected to build the system before the start of the separators in March 1992. (author)

People and things. CERN Courier, Oct 1985, v. 25(8)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1985-10-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Commemorating the special association of the late Paul Dirac with the International Centre for Theoretical Physics in Trieste, the Centre has instituted Dirac medals, awarded yearly on 5 August - Dirac's birthday - for contributions to theoretical physics. The big radio-frequency quadrupole (RFQ) at the Institute for Nuclear Study, Tokyo, recently accelerated its first proton beam. One highlight of the now traditional meeting of Nobel Laureates in Lindau was a round table discussion. The theme was the present state of high energy physics and possible developments in theory, technology and experiment.

People and things. CERN Courier, Oct 1985, v. 25(8)

International Nuclear Information System (INIS)

Anon.

1985-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Commemorating the special association of the late Paul Dirac with the International Centre for Theoretical Physics in Trieste, the Centre has instituted Dirac medals, awarded yearly on 5 August - Dirac's birthday - for contributions to theoretical physics. The big radio-frequency quadrupole (RFQ) at the Institute for Nuclear Study, Tokyo, recently accelerated its first proton beam. One highlight of the now traditional meeting of Nobel Laureates in Lindau was a round table discussion. The theme was the present state of high energy physics and possible developments in theory, technology and experiment

How to help CERN to run more simulations

CERN Multimedia

The LHC@home team

2016-01-01

With LHC@home you can actively contribute to the computing capacity of the Laboratory!   You may think that CERN's large Data Centre and the Worldwide LHC Computing Grid have enough computing capacity for all the Laboratory’s users. However, given the massive amount of data coming from LHC experiments and other sources, additional computing resources are always needed, notably for simulations of physics events, or accelerator and detector upgrades. This is an area where you can help, by installing BOINC and running simulations from LHC@home on your office PC or laptop. These background simulations will not disturb your work, as BOINC can be configured to automatically stop computing when your PC is in use. As mentioned in earlier editions of the Bulletin (see here and here), contributions from LHC@home volunteers have played a major role in LHC beam simulation studies. The computing capacity they made available corresponds to about half the capacity of the CERN...

Reflections on the past and future of CERN

CERN Multimedia

Corinne Pralavorio

2010-01-01

The well-known science historian, Dominique Pestre, gives his insight into CERN's history and changing trends in the perception of fundamental research.    Dominique Pestre, Director of Research at Paris's Ecole des hautes études en sciences sociales (EHESS). What does the history of CERN teach us? How have the ideas which gave birth to the largest fundamental physics research centre in the world evolved? It is always interesting to stand back and look at the history of one's own organisation in relation to developments in society. On Monday, 13 December, at the University of Geneva's physics faculty, Dominique Pestre will give a lecture and moderate a discussion on these issues. As director of research at Paris's Ecole des hautes études en sciences sociales (EHESS), Dominique Pestre is one of France's principal science historians. With his physics background, he has many publications to his name on the history of physics, the practice of science in the West and o...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions ...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

The effects of contingency factors on management control systems: an empirical study at CERN

CERN Document Server

Paaso, Ilkka

Contingency theory and management control systems research offer avenues for investigating how contextual factors in organizations affect performance. This quantitative case study investigates how the context of CERN internal services influences the performance consciousness of functional service managers. A literature review recognized four contingency factors relevant for performance consciousness: interdependence, scope, standardization and variation. Data from these factors was measured empirically using a cross-sectional electronic survey and supplemented by data gathered from CERN internal documentation. A quantitative analysis of the data was performed using structural equation modelling. The main findings were congruent with existing literature indicating that a.) high interdependence between work units is associated with decreased variation, increased standardization and increased performance consciousness. b.) high scope is related to increased variation and decreased standardization. Overall, a bet...

Collide@CERN Geneva

CERN Multimedia

CERN. Geneva; Kieffer, Robert; Blas Temino, Diego; Bertolucci, Sergio; Mr. Decelière, Rudy; Mr. Hänni, Vincent

2014-01-01

CERN, the Republic and Canton of Geneva, and the City of Geneva are delighted to invite you to “Collide@CERN Geneva Music”. Come to the public lecture about collisions between music and particle physics by the third winners of Collide@CERN Geneva, Vincent Hänni & Rudy Decelière, and their scientific inspiration partners, Diego Blas and Robert Kieffer. The event marks the beginning of their residency at CERN, and will be held at the CERN Globe of Science and Innovation on 16 October 2014 at 19.00. Doors will open at 18.30.

CERN Photo club

CERN Multimedia

CERN Photo club

2016-01-01

The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

CERN Cricket Club

CERN Multimedia

CERN Cricket Club

2010-01-01

CERN Cricket Club Match Reports The cricket season is well under way, despite the weather, and several matches have been played. The match reporters have, however, found it too difficult to limit their reports to ¼ of a page, hence the reports have not appeared in the bulletin. All reports can be found at http://cern.ch/Club-Cricket/reports/reports.html The list of forthcoming matches can be consulted at http://cern.ch/Club-Cricket/fixtures.html Further information about the CERN Cricket Club can be found at http://cern.ch/Club-Cricket/

CERN Cricket Club

CERN Document Server

CERN Cricket Club

2018-01-01

The CERN Cricket Club 2018 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 12th, at 18.00!  The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/cricket/ or turn up for net practice, which takes place each Thursday evening (apart from CERN official holidays) until the end of September (starting at 18:00 to around 20:00) at the CERN Prévessin site: http://cern.ch/cricket/CERN-Ground.html The first matches will be in the Geneva T20 competition on Saturday and Sunday, April 14th / 15th. 

Assembly and Quality Control of the LHC Cryostats at CERN Motivations, Means, Results and Lessons Learnt

CERN Document Server

Poncet, A; Parma, V; Strubin, P; Tock, JP; Tommasini, D

2007-01-01

In 2001, the project management decided to perform at CERN the final assembly of the LHC superconducting magnets with cryostat parts and cold masses produced by European Industry in large series. This industrial-like production has required a very significant investment in tooling, production facilities, engineering and quality control efforts, in contractual partnership with a consortium of firms. This unusual endeavour of a limited lifetime represented more than 850,000 working hours spanning over five years, the work being done on a result-oriented basis by the contractor. This paper presents the reasons for having conducted this project at CERN, summarizes the work breakdown structure, the production means and methods, the infrastructure specially developed, the tooling, logistics and quality control aspects of the work performed and the results achieved, in analytical form. Finally, the lessons learnt are outlined.

CERN honours Georges Charpak

CERN Multimedia

2009-01-01

CERN pays tribute to the work of Georges Charpak at a colloquium in honour of his 85th birthday. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-Multirate-200-to-753-kbps-480x360.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-posterframe-480x360-at-10-percent.jpg', '1167500', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); Watch the video conference of Georges Charpak.   On 9 March CERN’s Main Auditorium was the venue for a fascinating and moving celebration marking the 85th birthday of Georges Charpak, who was awarded the Nobel Prize for Physics in 1992 for his inven...

CERN Video News

CERN Document Server

2003-01-01

From Monday you can see on the web the new edition of CERN's Video News. Thanks to a collaboration between the audiovisual teams at CERN and Fermilab, you can see a report made by the American laboratory. The clip concerns the LHC magnets that are being constructed at Fermilab. Also in the programme: the spectacular rotation of one of the ATLAS coils, the arrival at CERN of the first American magnet made at Brookhaven, the story of the discovery 20 years ago of the W and Z bosons at CERN. http://www.cern.ch/video or Bulletin web page.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1996-01-01

On 8 October, H.E. Mr David Beattie, British Ambassador to Switzerland, Mr John R. Nichols, H.M. Consul-General in Geneva and, Prof. Christopher Llewellyn Smith, CERN*'s Director General, formally opened the industrial exhibition of thirty-three British hi-tech companies at CERN, which takes place from 8 to 11 October, 1996. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

Monitoring of conventional environmental parameters at CERN Annual Report 2003

CERN Document Server

Kleiner, S

2004-01-01

The monitoring programme for conventional environmental parameters at CERN comprises the control of water released from CERN installations, checks of water quality in rivers receiving water from CERN and monitoring of ambient air quality at places close to the CERN sites. The control of released water includes continuous monitoring of pH and temperature at six CERN water outlets and periodical sampling and analysis campaigns to check in more details the quality of the water released from the CERN sites. Regular measurements of pH, temperature, concentration of dissolved oxygen and conductivity were performed in the water of the rivers Nant d'Avril (CH) and Le Lion (F) as well as in the water of the streams around the seven LHC sites PA2 − PA8. The concentrations of nitrogen oxides and ozone in the ambient air, which may be produced in accelerator facilities and released into the environment, were measured at two off-site monitoring stations in Maisonnex (CH) and Cessy (F). The report summarises the results ...

Monitoring of conventional environmental parameters at CERN Annual Report 2004

CERN Document Server

Dziewa, A

2005-01-01

The monitoring programme for conventional environmental parameters at CERN comprises the control of water released from CERN installations, checks of water quality in rivers receiving water from CERN and monitoring of ambient air quality at places close to the CERN sites. The control of released water includes continuous monitoring of pH and temperature at six CERN water outlets and periodical sampling and analysis campaigns to check in more details the quality of the water released from the CERN sites. Sporadic river-water analyses and regular measurements of pH, temperature, concentration of dissolved oxygen and conductivity, were performed in the water of the rivers Nant d'Avril (CH) and Le Lion (F) as well as in the water of the streams around the seven LHC sites PA2 − PA8. The concentrations of nitrogen oxides and ozone in the ambient air, which may be produced in accelerator facilities and released into the environment, were measured at two off-site monitoring stations in Maisonnex (CH) and Cessy (F)....

Young Artists@ CERN

CERN Multimedia

2004-01-01

In view of 50th anniversary of CERN, about 20 young artists will be visiting CERN from 26 to 31 January to learn about the laboratory's research and the mysterious world of particle physics. The impressions they take home will be the main inspiration for the artwork they will then produce for an exhibition to be inaugurated in October 2004 as part of CERN's 50th anniversary celebration. We are looking for scientists who are interested in the Art-Science synergy and who can volunteer to discuss their work at CERN to these young artists during this week (25-31/01). Please contact renilde.vanden.broeck@cern.ch if you are interested. The project is called Young Artists@ CERN and for more information look at this website: http://www.hep.ucl.ac.uk/~andy/CERNart/

CERN Cricket club

CERN Multimedia

CERN Cricket club

2015-01-01

The CERN Cricket Club 2015 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 16th, at 18:00! The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/ or turn up for net practice, which takes place each Thursday evening from April 16th (apart from CERN official holidays) until the end of September (starting at 18:00 to around 19:30) at the CERN Prévessin site: http://club-cricket.web.cern.ch/Club-Cricket/CERN-Ground.html The first match will be at home on Sunday, April 19th against Rhone CC from Lyon.

CERN Table Tennis Club

CERN Multimedia

CERN Table Tennis Club

2014-01-01

CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

17th September 2010 - Signature of a joint declaration by CERN represented by Director-General R. Heuer and the Brazilian Centre for Physics Research (CBPF) represented by R. Shellard, witnessed by the Ambassador to the United Nations Office M. N. Farani Azevêdo, signing the guest book.

CERN Multimedia

Maximilien Brice

2010-01-01

17th September 2010 - Signature of a joint declaration by CERN represented by Director-General R. Heuer and the Brazilian Centre for Physics Research (CBPF) represented by R. Shellard, witnessed by the Ambassador to the United Nations Office M. N. Farani Azevêdo, signing the guest book.

Chairman of the DELL Board of Directors and Chief Executive Officer Michael S. Dell with CERN Director-General R. Heuer and in front of the ATLAS detector (centre) with ATLAS Deputy Spokesperson A. Lankford (left) and Information Technology Department Head F. Hemmer on 26th January 2010.

CERN Multimedia

Maximilien Brice

2010-01-01

Chairman of the DELL Board of Directors and Chief Executive Officer Michael S. Dell with CERN Director-General R. Heuer and in front of the ATLAS detector (centre) with ATLAS Deputy Spokesperson A. Lankford (left) and Information Technology Department Head F. Hemmer on 26th January 2010.

Control system design of the CERN/CMS tracker thermal screen

CERN Document Server

Carrone, E

2003-01-01

The Tracker is one of the CMS (Compact Muon Solenoid experiment) subdetectors to be installed at the LHC (Large Hadron Collider) accelerator, scheduled to start data taking in 2007 at CERN (European Organization for Nuclear Research). The tracker will be operated at a temperature of -10 degree C in order to reduce the radiation damage on the silicon detectors; hence, an insulated environment has to be provided by means of a screen that introduces a thermal separation between the Tracker and the neighboring detection systems. The control system design includes a formal description of the process by means of a thermodynamic model; then, the electrical equivalence is derived. The transfer function is inferred by the ratio of the voltage on the outer skin and the voltage input, i.e. the ratio of the temperature outside the tracker and the heat generated (which is the controlled variable). A PID (Proportional Integral Derivative) controller has been designed using MatLab. The results achieved so far prove that thi...

CERN prepares for the LHC and beyond

Energy Technology Data Exchange (ETDEWEB)

Rodgers, Peter

2000-05-01

it is more proactive and explicit'', says Juan Antonio Rubio, head of CERN's newly created education and technology transfer division. ''The aim is less to generate revenue'', he says, ''than to demonstrate to the CERN member states that the money invested in CERN is bringing benefits to European industry.'' Technologies that CERN is strong in include superconductivity, information technology, control systems and vacuum technology. Various accelerator and detector technologies have also been transferred to medical applications. So what will happen at CERN after the LHC? Maiani sees three possibilities. The first is a linear collider called CLIC that will have a centre-of-mass energy of 3 or 4 TeV. Maiani does not see CLIC as being in competition with existing proposals to build a 1 TeV linear collider in Germany, Japan or the US. Such a collider would, he says, come on-line before CLIC and focus on a lower energy range. ''However, money is money'', he admits, and if it came to a choice between a 1 TeV machine and a 3 TeV machine, he would back the latter. (UK) (abstract truncated)

Local fishing associations and environment authorities visit CERN

CERN Document Server

AUTHOR|(CDS)2099575

2016-01-01

Local fishing associations and Host-States environment authorities visited CERN on Thursday 21st April 2016. They discovered the efforts made by CERN and its Health, Safety and Environment (HSE) unit to control and limit the impact of the Laboratory's activities on natural environment, and more specifically local rivers.

CERN Medtech:Hackathon

CERN Multimedia

Olofsson, Simon

2018-01-01

The CERN Medtech:Hackathon, organised by CERN Knowledge Transfer, was held in IdeaSquare during 6-9 April. Teams from all around the world gathered, by using CERN technology, to solve problems posed by the Medtech industry.

CERN in 2030

CERN Multimedia

Laëtitia Pedroso

2011-01-01

A competition will soon be launched to select the architect, urban planner or landscape designer to undertake the first phase of redevelopment of the parking area by the flagpoles, between Entrances A and B. This will be the first stage in a wider development project aimed at sprucing up the CERN site and enhancing its image. Work to create a pleasant and harmonious area at the CERN entrance will start in 2013 while preparatory work for other developments inside the CERN site has already begun…   CERN as it is today.  By 2030, CERN will be a greener place, much like a university campus. The arrival of the tramway on 30 April will be an opportunity to forge ahead with the urban plan aimed at rejuvenating the CERN site and redefining how it is organised. "Nearly sixty years after CERN's first buildings went up, this plan will help transform the site and give it a welcoming, friendly face, a bit like a university campus," explains Thierry Chanard, urban plannin...

Germany at CERN

CERN Multimedia

2005-01-01

From left to right: Maximilian Metzger, CERN's Secretary-General, Hermann Schunck, Director at the German Federal Ministry of Education and Research, and Robert Aymar, CERN's Director-General, talking to Wolfgang Holler from Butting, one of the companies at the "Germany at CERN" exhibition. Far right : Susanne-Corinna Langer-Greipl from BMBF, delegate to the CERN Finance Committee. For three days, CERN's Main Building was transformed into a showcase for German industry. Twenty-nine companies from sectors related to particle physics (electrical engineering, vacuum and low temperature technology, radiation protection, etc.) were here for the ninth "Germany at CERN" exhibition, organised by the German Federal Ministry of Education and Research (BMBF), which gave them the opportunity to meet scientists and administrators from the Laboratory. On 1 March the exhibition was visited by a German delegation headed by Dr Hermann Schunck, Director at BMBF.

Control of the Dipole Cold Mass Geometry at CERN to Optimize LHC Performance

CERN Document Server

Wildner, E; La China, M; Tommasini, D

2006-01-01

The detailed shape of the 15 m long superconducting LHC dipole cold mass is of high importance as it determines three key parameters: the beam aperture, nominally of the order of 10 beam standard deviations; the connectivity of the beam- and technical lines between magnets; the transverse position of non-linear correctors mounted on the dipole ends. An offset of the latter produces unwanted beam dynamics perturbations. The tolerances are in the order of mm over the length of the magnet. The natural flexibility of the dipole and its mechanical structure allow deformations during handling and transportation which exceed the tolerances. This paper presents the observed deformations of the geometry during handling and various operations at CERN, deformations which are interpreted thanks to a simple mechanical model. These observations have led to a strategy of dipole geometry control at CERN, based on adjustment of the position of its central support (the dipole is supported at three positions, horizontally and v...

France at CERN

CERN Multimedia

CERN Bulletin

2010-01-01

Rolf Heuer, CERN Director General, visits the exhibition "La France au CERN". The exhibition France at CERN, organized by UBIFRANCE in collaboration with CERN's GS/SEM (Site Engineering and Management) service, took place from Monday 7 to Wednesday 9 June in the Main Building. The 36 French firms taking part came to present their products and technologies related to the Organization's activities. The next exhibition will be "Netherlands at CERN" in November.

Close encounters of the prototype kind

CERN Multimedia

2005-01-01

CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. Close encounters of the prototype kind CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. The prototype of the control consoles that will be at the heart of the future CERN Control Centre (CCC) has just been installed in the Roy Billinge Room in Building 354. Until now, there have been four separate control rooms for the CERN accelerators and technical infrastructure. The CCC, which will be located on the Prévessin site, will bring them all together in a single room. The Centre will consist of 40 consoles for four different areas (LHC, SPS, PS complex and technical infrastructure). The prototype was tested by the technicians for a month. Following installation and con...

CERN Shop Christmas Sale

CERN Multimedia

Visits & Exhibition Service/ETT-VE

2001-01-01

11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

Integrating of renewable energy in operation system: the Special Regime Control Centre (CECRE)

International Nuclear Information System (INIS)

Division, M.

2007-01-01

The implementation of Red Electrica de Espana Special Regime Control Centre (CECRE) has demonstrated the Spanish System Operators commitment of integrating the maximum possible wind power generation into the electrical system compatible with secure operation. With this leadership initiative,for the first time in the world, a System Operator Control Centre (CECRE) has succeeded in sending power control instructions to wind power generators over the country through Generation Control Centres (CGC) to which these generators must be connected complying with the Spanish Rules. (Author)

CERN Photo Club (CPC) / Canon Contest - My View of CERN

CERN Multimedia

Steyaert, Didier

2016-01-01

The CERN Photo Club has organized in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016.

What's new@CERN, episode 2

CERN Multimedia

CERN Video productions

2011-01-01

On Monday 7 November at 4pm in English and 4.20pm in French, watch "What's new@CERN" on webcast.cern.ch. In this second episode: LHC performance, a journey to the particle source and this past month's news.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-posterframe-640x360-at-30-percent.jpg', '1394250', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4');

Inside the LEP control room at start-up

CERN Multimedia

1989-01-01

Physicists grouped around a screen in the LEP control room at the strat-up of LEP on 14 July 1989. The emotion of the moment is clear. Carlo Rubbia, Director-General of CERN at the time, is in the centre and on his left, Herwig Schopper, former Director-General of the Organization.

Doing business with CERN

CERN Multimedia

2015-01-01

The Procurement Service, in collaboration with the Communications group’s Design team, has recently launched a new information campaign targeted at companies wishing to supply their products and services to CERN. This campaign comprises:   A brochure, available in hard and soft copy:  http://procurement.web.cern.ch/brochures/doing-business-with-cern.   A 6-minute video overview: https://procurement-dev.web.cern.ch/doing-business-with-cern. This campaign is intended for Member State firms with whom CERN is yet to do business. The key objectives are: To emphasise that CERN can be considered a major customer across a wide range of activities;   To present CERN’s procurement procedures in a dynamic and digestible way;   To highlight the information available on CERN’s procurement website: http://procurement.web.cern.ch. Furthermore, a new section called “Having a contract with CERN” is also now ava...

A design basis for the development of advanced CANDU control centres

Energy Technology Data Exchange (ETDEWEB)

Feher, M P; Davey, E C; Lupton, L R [Atomic Energy of Canada Ltd., Chalk River, ON (Canada)

1996-12-31

The basic design for current CANDU control centres was established in the early 1970`s. Plants constructed since then have, for the most part, retained the same basic design. Several factors have led to the need to re-examine CANDU control centre design for plants to be built beyond the year 2000. These factors include the changing roles and responsibilities for the operations staff, an improved understanding of operational issues associated with supervisory control, an improved understanding of human error in operational situations, the opportunity for improved plant performance through the introduction of new technologies, and marketing pressures. This paper describes the proposed design bases for the development of advanced control centres to be implemented in CANDU plants beyond the year 2000. Four areas have been defined covering design goals, design principles, operational bases, and plant functional bases. (author).

A design basis for the development of advanced CANDU control centres

International Nuclear Information System (INIS)

Feher, M.P.; Davey, E.C.; Lupton, L.R.

1995-01-01

The basic design for current CANDU control centres was established in the early 1970's. Plants constructed since then have, for the most part, retained the same basic design. Several factors have led to the need to re-examine CANDU control centre design for plants to be built beyond the year 2000. These factors include the changing roles and responsibilities for the operations staff, an improved understanding of operational issues associated with supervisory control, an improved understanding of human error in operational situations, the opportunity for improved plant performance through the introduction of new technologies, and marketing pressures. This paper describes the proposed design bases for the development of advanced control centres to be implemented in CANDU plants beyond the year 2000. Four areas have been defined covering design goals, design principles, operational bases, and plant functional bases. (author)

All Digital IQ Servo-System for CERN Linacs

CERN Document Server

Broere, J; Garoby, R; Rohlev, A; Serrano, J

2004-01-01

A VME based control system has been developed and built at CERN for the servo loops regulating the field in linac accelerating structures. It is an all-digital system built on a single VME card, providing digital detection, processing, and modulation. It is foreseen to be used, in different versions, for the needs of both present and future CERN hadron linacs. The first application will be in the energy ramping RF chain of the CERN Heavy Ion Linac (linac 3). Design principle and the experimental results are described.

From the CERN web: knowledge transfer, sustainability, CERN openlab and more

CERN Multimedia

2015-01-01

This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Previous successful Knowledge Transfer enterprises have helped to develop several useful technologies, such as these photonic crystals, which glow when high-energy charged particles pass through, and are used for medical imaging. New Knowledge Transfer website to grow CERN’s industry links 23 November – by Harriet Jarlett  CERN’s Knowledge Transfer Group has just launched a new tool to encourage CERN researchers and businesses to share their technologies, ideas and expertise. It’s hoped that by facilitating these exchanges the tool will inspire new ways to apply CERN technologies commercially, to help benefit industry and society. Continue to read…    The power station at CERN's Prévessin site. (Image: Margot Frenot/CERN). CERN an...

CERN's newest building

CERN Multimedia

Anaïs Vernède

2011-01-01

With a growing number of users looking for offices, the shortage of space has become acute, particularly for physicists. Building 42, inaugurated on Friday 11 February, offers almost 300 new work-spaces and a particularly pleasant working environment.   Mauro Dell’Ambrogio, the Swiss State Secretary for Education and Research (left), Rolf Heuer , CERN Director-General (centre), and Mark Muller, President of the Government of the Republic and Canton of Geneva and Head of the Department of Construction and Information Technology (right) at the opening of Building 42 on 11 February, 2011.   Construction work for the new Building 42 began in January 2009, thanks to support from the Swiss foundation FIPOI (Fondation des immeubles pour les organisations internationales). After two years of work, the building, an extension of Building 40, is ready to accommodate physicists from around the world who have come to work on the LHC. "We had more than 25 external contractors working...

CERN panel calls for cuts and shake-ups

CERN Multimedia

Weiss, G

2002-01-01

An external review committee has proposed that CERN slash other research projects in order to finish the LHC. The report of the ERC praised the design of the LHC and the technical competence of CERN staff. However it criticized the lab for "serious weaknesses" in cost control, contract management and financial reporting (1 page).

Design principles for CANDU control centres in response to evolving utility business needs

International Nuclear Information System (INIS)

Davey, E.

2002-01-01

Nuclear generation operators are facing a challenging business environment at the beginning of the new millennium. Evolving changes in business context, competitive commercial pressures, and changes in technology have dictated recurring evaluation of operational practices and the adequacy of supporting tools, and the pursuit of opportunities for operational improvement. A key area of utility operations that has been impacted by these changes is the nuclear plant control centre. Changes to workspace layout, equipment provisions, staffing, and work organization are examples of some of the adjustments being introduced to improve operational and safety effectiveness. This paper discusses some of the key factors influencing these changes and identifies additional design principles for CANDU control centres that will enable new control centre designs and retrofits of existing control centres to remain relevant and responsive to utility needs. (author)

Experience with workstations for accelerator control at the CERN SPS

International Nuclear Information System (INIS)

Ogle, A.; Ulander, J.; Wilkie, I.

1990-01-01

The CERN super proton synchrotron (SPS) control system is currently undergoing a major long-term upgrade. This paper reviews progress on the high-level application software with particular reference to the operator interface. An important feature of the control-system upgrade is the move from consoles with a number of fixed screens and limited multitasking ability to workstations with the potential to display a large number of windows and perform a number of independent tasks simultaneously. This workstation environment thus permits the operator to run tasks in one machine for which he previously had to monopolize two or even three old consoles. However, the environment also allows the operator to cover the screen with a multitude of windows, leading to complete confusion. Initial requests to present some form of 'global status' of the console proved to be naive, and several iterations were necessary before the operators were satisfied. (orig.)

Measurement of small-angle antiproton-proton and proton-proton elastic scattering at the CERN intersecting storage rings

NARCIS (Netherlands)

Amos, N.; Block, M.M.; Bobbink, G.J.; Botje, M.A.J.; Favart, D.; Leroy, C.; Linde, F.; Lipnik, P.; Matheys, J-P.; Miller, D.

1985-01-01

Antiproton-proton and proton-proton small-angle elastic scattering was measured for centre-of-mass energies at the CERN Intersectung Storage Rings. In addition, proton-proton elastic scattering was measured at . Using the optical theorem, total cross sections are obtained with an accuracy of about

From the CERN web: Collide@CERN, Fermilab neutrinos and more

CERN Multimedia

2015-01-01

This new section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Ruth Jarman and Joe Gerhardt. (Photo: Matthias H. Risse). Collide@CERN Ars Electronica Award goes to “Semiconductor” 10 August – Collide@CERN Ruth Jarman and Joe Gerhardt, two English artists collaborating under the name Semiconductor, are this year’s recipients of the Collide@CERN Ars Electronica Award. In the coming months, they will begin a two-month residency at CERN.  Continue to read…     Illustration: Fermilab/Sandbox Studio.   Fermilab experiment sees neutrinos change over 500 miles 7 August - Fermilab press release Scientists on the NOvA experiment saw their first evidence of oscillating neutrinos, confirming that the extraordinary detector built for the project not only functions as planned but is also making great p...

23 February 2010 - Polish Under Secretary of State, Ministry of Science and Higher Education, J. Szwed visiting CERN installations with sLHC Project Office T. Kurtyka and Machine Protection and Electrical Integrity Group Leader A. Siemko.

CERN Multimedia

Michel Blanc

2010-01-01

Tirage 1002023-01: In LHCb experimental area with Machine Protection and Electrical Integrity Group Leader A. Siemko; Mission Counselor M. Cichucka; Counselor to the Minister M. Klimkiewicz, Under Secretary of State J. Szwed; LHCb Collaboration, national group leader, Henryk Niewodniczanski Institut of Nuclear Physics G. Polok, Collaboration Spokesperson A. Golutvin and Delegate to CERN Council A. Zalewska. Tirage 28: Visiting the Computing Centre with IT Department Head F. Hemmer Tirage 49: In CMS Control centre, buiding 354 with Collaboration Spokesperson G. Tonelli and CMS Collaboration, national group leader, University of Warsaw J. Krolikowski. Tirage 62: visiting ALICE exhibition area and counting room with Collaboration Spokesperson J. Schukraft. Tirage 82-99: Under Secretary of State address to the Polish Community Tirage 82: Machine Protection and Electrical Integrity Group Leader A. Siemko Tirage 83: Polish Delegate to CERN Council A. Zalewska. Tirage 85: Directorate Office E. Rondio Tirage 86: ATLA...

Towards a Unified Environmental Monitoring, Control and Data Management System for Irradiation Facilities: the CERN IRRAD Use Case

CERN Document Server

Gkotse, Blerina; Jouvelot, Pierre; Matli, Emanuele; Pezzullo, Giuseppe; Ravotti, Federico

2017-01-01

The qualification of materials, electronic components and equipment for the CERN High Energy Physics experiments and beyond requires testing against possible radiation effects. These quite complex tests are performed by specialized teams working in irradiation facilities such as IRRAD, the Proton Irradiation Facility at CERN. Building upon the details of the overall irradiation control, monitoring, and logistical systems of IRRAD as a use case, we introduce the motivations for and general architecture of its new data management framework, currently under development at CERN. This infrastructure is intended to allow for the seamless and comprehensive handling of IRRAD irradiation experiments and to help manage all aspects of the facility. Its architecture, currently focused on the specific requirements of the IRRAD facility, is intended to be upgraded to a general framework that could be used in other irradiation facilities within the radiation effects community, as well as for other applications.

The Run Control system of the NA62 experiment at CERN SPS

CERN Document Server

Lazzeroni, Cristina

2016-01-01

The NA62 experiment at CERN SPS started physics data taking this year with the aim to measure the ultra-rare decay K + → π +νν¯. The experiment consists of a large number of subsystems to reach the goal of 10 % accuracy and less than 10 % background. The Run Control has been designed to link their trigger and data acquisition system in a single central application easily controllable by non-expert shifters. It has been continuously evolving over time, integrating new equipments, following new requirements and feedback from shifters. The next steps of development is a more automatized system that integrates the knowledge acquired during the operation of the experiment.

CERN Relay Race

CERN Multimedia

Running Club

2010-01-01

This year’s CERN Relay Race will take place around the Meyrin site on Thursday 20th May at 12h00. This annual event is for teams of 6 runners covering distances of 1000m, 800m, 800m, 500m, 500m and 300m respectively. Teams may be entered in the Seniors, Veterans, Ladies, Mixed or Open categories. The registration fee is 10 CHF per runner, and each runner receives a souvenir prize. As usual, there will be a programme of entertainments from 12h in the arrival area, in front of the Restaurant no. 1. Drinks, food, CERN club information and music will be available for the pleasure of both runners and spectators. The race starts at 12h15, with results and prize giving at 13:15.   For details of the race, and of how to sign up a team, please visit: https://espace.cern.ch/Running-Club/CERN-Relay The event is organised by the CERN Running Club with the support of the CERN Staff Association.  

Sharing resources@CERN

CERN Multimedia

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Until now many people were unaware that copies of the same book (or standard, or journal) are often held not only by the library but by different divisions. (Here Eduardo Aldaz, from the PS division, and Isabel Bejar, from the ST division, read their divisional copies of the same book.) The idea behind the library's new sharing resources@CERN' initiative is not at all to collect the books in individual collections at the CERN library, but simply to register them in the Library database. Those not belonging to the library will in principle be unavailable for loan, but should be able to be consulted by anybody at CERN who is interested. "When you need a book urgently and it is not available in the library,' said PS Division engineer Eduardo Aldaz Carroll, it is a sham...

CERN Pensioners Association

CERN Multimedia

The GAC Committee

2004-01-01

Open Day To all CERN retired staff As part of the celebrations organised for the 50th anniversary of CERN, an Open Day will be held on Saturday 16 October 2004. Anyone willing to act as a guide, either to help and inform visitors at the reception points or to guide groups of visitors, sharing your knowledge with them, is invited to fill in the attached form. A preparatory meeting will be arranged for those who left CERN some time ago and whose knowledge of the site may no longer be quite up-to-date. The Open Day organisers need your help, which will be very much appreciated. We hope that many pensioners will participate. People with internet access may enrol directly without coming to CERN, http://www.cern.ch/CERN50/openday The GAC Committee OPEN DAY : CALL FOR VOLUNTEERS 16th October 2004 So now you are excited about the Open Day, how can you participate? As you can imagine, for such a large number of activities, we need many volunteers. Please return the following form to Elena Battis...

Human factors engineering applied to Control Centre Design of a research nuclear reactor

Energy Technology Data Exchange (ETDEWEB)

Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R., E-mail: larissapfarias@ymail.com [Instituto de Engenharia Nuclear (DENN/SEESC/IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab, de Usabilidade e Confiabilidade Humana; Monteiro, Beany G. [Universidade Federal do Rio Janeiro (UFRJ), Rio Janeiro, RJ (Brazil). Departamento de Desenho Industrial

2017-07-01

The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

Human factors engineering applied to Control Centre Design of a research nuclear reactor

International Nuclear Information System (INIS)

Farias, Larissa P. de; Santos, Isaac J.A. Luquetti dos; Carvalho, Paulo V.R.; Monteiro, Beany G.

2017-01-01

The Human Factors Engineering (HFE) program is an essential aspect for the design of nuclear installations. The overall aim of the HFE program is the improvement of the operational reliability and safety of plant operation. The HFE program main purpose is to ensure that human factor practices are incorporated into the plant design, emphasizing man-machine interface issues and design improvement of the nuclear reactor Control Centre. The Control Centre of nuclear reactor is a combination of control rooms, control suites and local control stations, which are functionally connected and located on the reactor site. The objective of this paper is to present a design approach for the Control Centre of a nuclear reactor used to produce radioisotopes and for nuclear research, including human factor issues. The design approach is based on participatory design principles, using human factor standards, ergonomic guidelines, and the participation of a multidisciplinary team during all design phases. Using the information gathered, an initial sketch 3D of the Control Centre was developed. (author)

30th November 2010 - Norwegian Ministry of Government Administration, Reform and Church Affairs State Secretary R. Valle signing the guest book with Head of International Relations F. Pauss and Director for Research and Scientific Computing S. Bertolucci; visiting CERN Computer Centre with Information Technology Department Head F. Hemmer.

CERN Multimedia

Maximilien Brice

2010-01-01

30th November 2010 - Norwegian Ministry of Government Administration, Reform and Church Affairs State Secretary R. Valle signing the guest book with Head of International Relations F. Pauss and Director for Research and Scientific Computing S. Bertolucci; visiting CERN Computer Centre with Information Technology Department Head F. Hemmer.

The Marie Curie Actions at CERN – reaching out beyond particle physics and Europe

CERN Document Server

EU Projects Office

2014-01-01

The European Commission’s Marie Curie Actions have been a pillar of the EU Framework Programmes for several decades as a means of promoting career development and enhancing mobility of researchers in Europe. This corresponds nicely to one of CERN’s main missions: to train the next generation of scientists and engineers.   The European Commissioner for Education, Culture, Multilingualism, Sport, Media and Youth, Androulla Vassiliou (centre) met the Marie Curie Fellows on her visit to CERN in April 2013. CERN has been pleased to be a major player in the Marie Curie Actions under the Sixth and Seventh Framework Programmes (FP6 from 2002 to 2006 and FP7 from 2007 to 2013), being one of the most successful participants in Europe. Under FP7, CERN was ranked first in Switzerland and fifth in Europe against stiff competition in terms of overall funding. Participation was in all of the Marie Curie Actions: Initial Training Networks, Industry-Academia Partnership Pathways, IRSES, CO...

CERN Holiday Gift Guide

CERN Multimedia

2013-01-01

Do you have last-minute gifts to get? Stuck for ideas? The CERN Shop and the ATLAS and CMS secretariats have some wonderfully unique gifts and stocking-fillers for sale this year - perfect for the physics fanatics in your life. Let's take a look...   1. CERN Notebook, 10 CHF - 2. CERN Pop-up book, 30 CHF - 3. USB Stick 8GB, 25 CHF - 4. CERN Tumbler, 12 CHF 5. ATLAS 3D Viewer, 5 CHF - 6. ATLAS Puzzle, 15 CHF - 7. CMS Umbrella, 25 CHF   These gifts are all available at the CERN Shop, with the exception of the ATLAS 3D Viewer and the CMS umbrella, which are only available from the respective secretariats. Don’t forget! If you’re from CERN, you still have time to take advantage of a 10% off discount at the CERN shop. Offer ends 20 December.

Integrity at CERN

CERN Document Server

Department, HR

2015-01-01

In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

CERN prepares for the LHC and beyond

International Nuclear Information System (INIS)

Rodgers, Peter

2000-01-01

division. ''The aim is less to generate revenue'', he says, ''than to demonstrate to the CERN member states that the money invested in CERN is bringing benefits to European industry.'' Technologies that CERN is strong in include superconductivity, information technology, control systems and vacuum technology. Various accelerator and detector technologies have also been transferred to medical applications. So what will happen at CERN after the LHC? Maiani sees three possibilities. The first is a linear collider called CLIC that will have a centre-of-mass energy of 3 or 4 TeV. Maiani does not see CLIC as being in competition with existing proposals to build a 1 TeV linear collider in Germany, Japan or the US. Such a collider would, he says, come on-line before CLIC and focus on a lower energy range. ''However, money is money'', he admits, and if it came to a choice between a 1 TeV machine and a 3 TeV machine, he would back the latter. The second option is a neutrino factory based on a muon storage ring. Maiani thinks that any neutrino factory would be built by a network of labs, and with the detectors thousands of kilometres away from the storage ring, location will not be too important. ''It will be really a world machine'', he says. The third option is a second phase of the LHC. Maiani believes that as microelectronics moves to shorter length scales, it may be possible to cope with even higher collision luminosities, thereby increasing the accessible energy range. Better magnets could also allow the energy to be increased beyond 14 TeV. However, Maiani recognizes the dangers of particle physics becoming isolated from the rest of science and society, and sees it as one of his jobs to make sure that this does not happen. ''The particle-physics community needs to be more open'', he cautions. (UK)

CernVM Online and Cloud Gateway: a uniform interface for CernVM contextualization and deployment

International Nuclear Information System (INIS)

Lestaris, G; Charalampidis, I; Berzano, D; Blomer, J; Buncic, P; Ganis, G; Meusel, R

2014-01-01

In a virtualized environment, contextualization is the process of configuring a VM instance for the needs of various deployment use cases. Contextualization in CernVM can be done by passing a handwritten context to the user data field of cloud APIs, when running CernVM on the cloud, or by using CernVM web interface when running the VM locally. CernVM Online is a publicly accessible web interface that unifies these two procedures. A user is able to define, store and share CernVM contexts using CernVM Online and then apply them either in a cloud by using CernVM Cloud Gateway or on a local VM with the single-step pairing mechanism. CernVM Cloud Gateway is a distributed system that provides a single interface to use multiple and different clouds (by location or type, private or public). Cloud gateway has been so far integrated with OpenNebula, CloudStack and EC2 tools interfaces. A user, with access to a number of clouds, can run CernVM cloud agents that will communicate with these clouds using their interfaces, and then use one single interface to deploy and scale CernVM clusters. CernVM clusters are defined in CernVM Online and consist of a set of CernVM instances that are contextualized and can communicate with each other.

Tunnel Linking the CERN Sites: Discontinuation of the (small) 'Attestation CERN'

CERN Multimedia

Service des Relations avec les Pays-hôtes

2004-01-01

With effect from 1st June 2004, members of the personnel whose contracts with the Organization are too short for them to hold legitimation documents issued by the Host States will be required to carry only the following documents to use the Tunnel linking the CERN sites: their national identity card, if accepted by the French and Swiss regulations, or their passport (with a visa/visas if required by the French and/or Swiss regulations) and their blue CERN card (access card). The (small) 'Attestation CERN' (CERN certificate) issued by the Users Office or the Human Resources Department will no longer be required. This amendment to paragraph 10 b) and to Annex 3 of the Rules for Use of the Tunnel (ref. CERN/DSU-DO/RH/8200) is related to the addition of an expiry date on blue CERN cards, which has been compulsory since 1st January 2003, and to the recording of all relevant information in the database used for the systematic checking of tunnel users by means of card readers installed at the tunnel. Relations...

Is the CERN recommended SCADA useable for the ST division?

CERN Document Server

Sollander, P; Epting, U

2001-01-01

Supervisory Control and Data Acquisition (SCADA) systems are widely used at CERN and in industrial control environments. In order to limit the costs of purchase, maintenance and support, a recommendation for one SCADA system is in preparation by the SCADA working group. This SCADA system should be used for all CERN in-house developed applications as they exist today e.g. in the Technical Control Room (TCR). This presentation will show the actual environment for the control and monitoring of the technical infrastructure at CERN and the needs for the future LHC infrastructure monitoring. The presentation will cover the control activities of all ST groups represented in the ST Control System WG. A possible solution for the integration of the technical infrastructure data into a SCADA system and a solution for the data exchange with the accelerators and the experiments will be presented. This includes a short term planning for the evaluation period as well as the long-term strategy on how to implement the chosen ...

CERN - better than science fiction!

CERN Document Server

2007-01-01

From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN audiovisual service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN's Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer).

The 1956 CERN Symposium

CERN Document Server

Jarlskog, Cecilia

2014-01-01

CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

CERN: Digitally open, too

CERN Multimedia

Computer Security Team

2013-01-01

The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

UK Minister enthusiastic after visit to CERN

CERN Multimedia

2008-01-01

ON Tuesday 5 August the UK Secretary of State for Innovation, Universities and Skills, John Denham, came to CERN. The UK continues its strong links with CERN.The Minister was welcomed on arrival at CERN by Robert Aymar, the Director-General, and senior British scientists. Following a short presentation, he began a comprehensive tour of the Laboratory with a visit to both the LHC at point 5 and the CMS experiment. After lunch the Minister’s busy schedule continued, completing his overview of the main areas of UK participation at CERN. As soon as he had signed the guest book, he was whisked off to visit the LHCb experiment, the LHC computing grid project (LCG) and the ATLAS control room. However, the last item on his itinerary was perhaps the most illuminating. Meeting a diverse group of British scientists, from technical and summer students to staff members with more than 30 years of experience, the Minister had the opportunity...

Database Foundation For The Configuration Management Of The CERN Accelerator Controls Systems

CERN Document Server

Zaharieva, Z; Peryt, M

2011-01-01

The Controls Configuration Database (CCDB) and its interfaces have been developed over the last 25 years in order to become nowadays the basis for the Configuration Management of the Controls System for all accelerators at CERN. The CCDB contains data for all configuration items and their relationships, required for the correct functioning of the Controls System. The configuration items are quite heterogeneous, depicting different areas of the Controls System – ranging from 3000 Front-End Computers, 75 000 software devices allowing remote control of the accelerators, to valid states of the Accelerators Timing System. The article will describe the different areas of the CCDB, their interdependencies and the challenges to establish the data model for such a diverse configuration management database, serving a multitude of clients. The CCDB tracks the life of the configuration items by allowing their clear identification, triggering of change management processes as well as providing status accounting and aud...

23 March 2010 - Thai Minister of Foreign Affairs K. Piromya visiting CERN installations with Coordinator for External Relations F. Pauss and Adviser for South-East Asia, Oceania, Cyprus, Malta, Iceland, Directorate Office E. Tsesmelis.

CERN Multimedia

Maximilien Brice

2010-01-01

During his visit he toured the LHC superconducting magnet test hall with Felicitas Pauss, CERN co-ordinator for external relations, right, and Frédérick Bordry, head of CERN's technology department. The minister also visited the ATLAS visitor centre.

Control protocol: large scale implementation at the CERN PS complex - a first assessment

International Nuclear Information System (INIS)

Abie, H.; Benincasa, G.; Coudert, G.; Davydenko, Y.; Dehavay, C.; Gavaggio, R.; Gelato, G.; Heinze, W.; Legras, M.; Lustig, H.; Merard, L.; Pearson, T.; Strubin, P.; Tedesco, J.

1994-01-01

The Control Protocol is a model-based, uniform access procedure from a control system to accelerator equipment. It was proposed at CERN about 5 years ago and prototypes were developed in the following years. More recently, this procedure has been finalized and implemented at a large scale in the PS Complex. More than 300 pieces of equipment are now using this protocol in normal operation and another 300 are under implementation. These include power converters, vacuum systems, beam instrumentation devices, RF equipment, etc. This paper describes how the single general procedure is applied to the different kinds of equipment. The advantages obtained are also discussed. ((orig.))

MapCERN: the CERN map on your mobile

CERN Multimedia

Anaïs Schaeffer

2011-01-01

On the initiative of the GS Department, a new smartphone application called MapCERN has just been released. Available in two different versions – one from the Apple Store for iPhones and the other from the web for Android and Blackberry – it will help you to find the building you're looking for more easily.     The Globe of Science and Innovation as "seen" in the augmented reality of the iPhone.  You've got an appointment with someone at the other end of the CERN site and you're planning to use the CERN map to find your way there but you suddenly realise you've left it in your office… No need to panic! Simply take out your smartphone and let it guide you to the building you're looking for. This first official CERN application, which has been developed by the GS Department in collaboration with private industry, is available free of charge from the Apple Store in the case of iPhones an...

A new readout control system for the LHCb upgrade at CERN

International Nuclear Information System (INIS)

Alessio, F; Jacobsson, R

2012-01-01

The LHCb experiment has proposed an upgrade towards a full 40 MHz readout system in order to run between five and ten times its initial design luminosity. The entire readout architecture will be upgraded in order to cope with higher sub-detector occupancies, higher rate and higher network load. In this paper, we describe the architecture, functionalities and a first hardware implementation of a new fast Readout Control system for the LHCb upgrade, which will be entirely based on FPGAs and bi-directional links. We also outline the real-time implementations of the new Readout Control system, together with solutions on how to handle the synchronous distribution of timing and synchronous information to the complex upgraded LHCb readout architecture. One section will also be dedicated to the control and usage of the newly developed CERN GBT chipset to transmit fast and slow control commands to the upgraded LHCb Front-End electronics. At the end, we outline the plans for the deployment of the system in the global LHCb upgrade readout architecture.

Experiments at CERN in 1981

International Nuclear Information System (INIS)

1981-08-01

This report contains the preliminary abstracts of the current experiments at the CERN SPS synchrotron, the anti p colliding beams, the CERN ISR, the CERN PS synchrotron, and the CERN synchrocyclotron. See hints under the relevant topics. (HSI)

CERN honours its guides

CERN Multimedia

2004-01-01

At the end of January, CERN's guides were rewarded for their devotion to the Laboratory. They have a passion for their work, know CERN inside-out and for 40 years have shown people of all ages and nationalities, from all walks of life, around the Laboratory. Who are they? Why, the CERN guides, of course. On 27 January, ten of CERN's 180 guides received special honours for their impressive number of guided tours in 2003. Presenting the awards in the Microcosm hall, CERN's Director-General Robert Aymar congratulated the winners on the key role they play with respect to the general public. "CERN would be nothing without you who show them its activities," he stressed. CERN's Director-General Robert Aymar congratulates Alberto Ribon for his tally of over 40 visits in the course of 2003.One of the prizes was the book «The Particle Odyssey». Here the book's co-author Christine Sutton dedicates it for Sijin Qian. Tzanko Spassoff (PH) and retired staff members Klaus Batzner and Antonio Francano wo...

CERN celebrated the first year in space for the Alpha Magnetic Spectrometer (AMS) with a visit from the crew of the shuttle mission, STS-134, who successfully delivered AMS to the International Space Station (ISS) last year.

CERN Multimedia

Laurent Egli

2012-01-01

During the celebrations at CERN, the astronauts unveiled a commemorative plaque on the lawn outside the POCC to mark the occasion and later gave a public lecture at CERN. Picture 28 : STS-134 astronauts (left to right) Andrew Feustel, Gregory Chamitoff, Gregory Johnson, Michael Fincke and Mark Kelly in the AMS Payload Operations Centre at CERN.

JOB CENTRE FOR DOMESTIC STAFF IN SWITZERLAND

CERN Multimedia

Relations with the Host States Service; http://www.cern.ch/relations/

2001-01-01

The Permanent mission of Switzerland to the International Organisations in Geneva has informed CERN that the Geneva Welcome Centre has set up an employment registration desk for the domestic staff of international civil servants. The aim of this pilot project is, on the one hand, to help international civil servants find domestic staff and, on the other hand, to help domestic staff holding an 'F'-type carte de légitimation find employment within 30 days after the expiry of a contract. For more information, please contact the Geneva Welcome Centre, La Pastorale, 106, route de Ferney, Case postale 103, 1211 Genève 20, tel. (+41.22) 918 02 70, fax (+41.22) 918 02 79), http://geneva-international.org/Welcome.E.html.

Inspired by CERN

CERN Multimedia

2004-01-01

Art students inspired by CERN will be returning to show their work 9 to 16 October in Building 500, outside the Auditorium. Seventeen art students from around Europe visited CERN last January for a week of introductions to particle physics and astrophysics, and discussions with CERN scientists about their projects. A CERN scientist "adopted"each artist so they could ask questions during and after the visit. Now the seeds planted during their visit have come to fruition in a show using many media and exploring varied concepts, such as how people experience the online world, the sheer scale of CERN's equipment, and the abstractness of the entities scientists are looking for. "The work is so varied, people are going to love some pieces and detest others," says Andrew Charalambous, the project coordinator from University College London who is also curating the exhibition. "It's contemporary modern art, and that's sometimes difficult to take in." For more information on this thought-provoking show, see: htt...

CERN Mobility Survey

CERN Multimedia

GS Department

2011-01-01

The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

France at CERN

CERN Multimedia

2001-01-01

From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

Sharing resources@CERN

CERN Multimedia

Maximilien Brice

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Photo 01: L. to r. Eduardo Aldaz, from the PS division, Corrado Pettenati, Head Librarian, and Isabel Bejar, from the ST division, read their divisional copies of the same book.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1994-01-01

Thirty-two British hi-tech companies present their products at this new industrial exhibition at CERN which takes place from 22 to 25 November, 1994. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

Fusion Revisits CERN

CERN Multimedia

2001-01-01

It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

CERN Services Availability during the CERN Annual Closure 2011

CERN Multimedia

IT & GS Departments

2011-01-01

General Services: Most of the services provided by the GS Department that do not depend on continuous human presence will remain available during the CERN annual closure. Support levels are reduced during this period, in general the target reaction time for problems will be ½ day. Apart from the heating system, no interruptions are scheduled. In case of failure, the reaction time for restoration of services depends on the arrangements that have been made on a service by service level. Incidents will be documented at http://gssb.web.cern.ch/ For more detailed information please consult the service-portal (http://cern.ch/service-portal). Computing Services Most of the services provided by the IT Department - including WLCG production services - will remain available during the CERN annual closure. No interruptions are scheduled but in case of failure, the restoration of services cannot be guaranteed. Problems will be dealt with on a best effort basis only. However, please note: Experts shoul...

Dr Jung Hyun KIM Vice Minister for Education, Science and Technology MEST Republic of Korea

CERN Multimedia

Jean-Claude Gadmer

2010-01-01

He learnt about CERN's LHC computing grid project from Frédéric Hemmer, head of the information technology department. In addition, the vice-minister toured the ATLAS visitor centre, the CMS control centre, the ALICE experiment's exhibition and control room, and he met Korean scientists at CERN.

Evolution of the CANDU control centre retrofit and new stations

International Nuclear Information System (INIS)

Olmstead, R.A.; Mitchell, W.

1991-01-01

Significant event data from operating nuclear plants in many countries consistently indicates human errors are the root cause for 40-60% of operating station significant events. Because so much information is already in digital form, opportunities exist to improve the CANDU control centre with retrofits that exploit this information. These opportunities are enhanced because of rapid technological development in computers and electronics, coupled with significant progress in the behavioural sciences that greatly increases our knowledge of the cognitive strengths and weaknesses of human beings. CANDU control rooms are undergoing retrofits and for future CANDU stations, a new concept of the control centre is emerging. The objective is to significantly reduce the incidence of human error, reduce operations and maintenance costs and improve both reliability and safety

Evolution of the CANDU control centre retrofit and new stations

Energy Technology Data Exchange (ETDEWEB)

Olmstead, R A [AECL-CANDU, ON (Canada); Mitchell, W [Ontario Hydro, Darlington Nuclear Generating Station, Bowmanville, ON (Canada)

1991-04-01

Significant event data from operating nuclear plants in many countries consistently indicates human errors are the root cause for 40-60% of operating station significant events. Because so much information is already in digital form, opportunities exist to improve the CANDU control centre with retrofits that exploit this information. These opportunities are enhanced because of rapid technological development in computers and electronics, coupled with significant progress in the behavioural sciences that greatly increases our knowledge of the cognitive strengths and weaknesses of human beings. CANDU control rooms are undergoing retrofits and for future CANDU stations, a new concept of the control centre is emerging. The objective is to significantly reduce the incidence of human error, reduce operations and maintenance costs and improve both reliability and safety.

The Duke of York visits CERN

CERN Multimedia

2004-01-01

The Duke of York chats before inaugurating the UK@CERN exhibition. From left to right: Robert Aymar, CERN's Director General, the Duke of York, and leading UK scientists at CERN: Jim Virdee, CMS deputy spokeman; theorist John Ellis ; and Steve Myers, head of the AB Department. On 23 November, the Duke of York visited CERN and, in his capacity as the UK's Special Representative for International Trade and Investment, inaugurated the UK@CERN Exhibition. This biennial trade show was initially held in 1968, the first such exhibition by a CERN member state. This year 22 companies displayed goods and services that could be of interest to CERN scientists. In his inaugural speech, the Duke emphasized that business between companies and CERN "is a two-way information flow with mutual benefits." The companies make sales but also benefit from technologies that CERN transfers to them. CERN benefits from the exchange, the Duke said, addressing CERN's scientists, because it "frees your time for what you do best: science....

See how people wished CERN a happy birthday with #MyCERN60

CERN Multimedia

Kate Kahle

2014-01-01

In the run up to 29 September, the hashtag #MyCERN60 gave CERN people and CERN’s followers on social media the chance to wish CERN a happy 60th birthday. Here are some of the highlights.   When tasked with wishing the European Laboratory for Particle Physics a happy 60th birthday, what would you do? Would you draw a picture? Bake a cake? #MyCERN60 on Twitter (EN, FR), Facebook, Google+ and social.cern.ch, gave people the opportunity to send a personal birthday greeting to the Organization. The results were heart-warming. Below is a selection of some of the messages received: Image credits: top left Sanam Ganjian via Google+, top right Rose Hannert via Twitter, middle left Anna P and Tina Nantsou via Facebook, middle right Francesco Palmonari via Twitter, bottom left  Smita Darmora via Facebook, bottom middle Hannah McClow via Twitter, bottom right Katya Chong via Twitter. Croatian students from the "Fran Galović" Koprivnica school celebrating CERN...

PREFACE: Lectures from the CERN Winter School on Strings, Supergravity and Gauge Theories, CERN, 9-13 February 2009 Lectures from the CERN Winter School on Strings, Supergravity and Gauge Theories, CERN, 9-13 February 2009

Science.gov (United States)

Uranga, A. M.

2009-11-01

This special section is devoted to the proceedings of the conference `Winter School on Strings, Supergravity and Gauge Theories', which took place at CERN, the European Centre for Nuclear Research, in Geneva, Switzerland 9-13 February 2009. This event is part of a yearly series of scientific schools, which represents a well established tradition. Previous events have been held at SISSA, in Trieste, Italy, in February 2005 and at CERN in January 2006, January 2007 and January 2008, and were funded by the European Mobility Research and Training Network `Constituents, Fundamental Forces and Symmetries of the Universe'. The next event will take place again at CERN, in January 2010. The school was primarily meant for young doctoral students and postdoctoral researchers working in the area of string theory. It consisted of several general lectures of four hours each, whose notes are published in this special section, and six working group discussion sessions, focused on specific topics of the network research program. It was well attended by over 200 participants. The topics of the lectures were chosen to provide an introduction to some of the areas of recent progress, and to the open problems, in string theory. One of the most active areas in string theory in recent years has been the AdS/CFT or gauge/gravity correspondence, which proposes the complete equivalence of string theory on (asymptotically) anti de Sitter spacetimes with certain quantum (gauge) field theories. The duality has recently been applied to understanding the hydrodynamical properties of a hot plasma in gauge theories (like the quark-gluon plasma created in heavy ion collisions at the RHIC experiment at Brookhaven, and soon at the LHC at CERN) in terms of a dual gravitational AdS theory in the presence of a black hole. These developments were reviewed in the lecture notes by M Rangamani. In addition, the AdS/CFT duality has been proposed as a tool to study interesting physical properties in other

CREATIVE COLLISIONS: ARTS @CERN

CERN Multimedia

CERN. Geneva

2012-01-01

In 2000, CERN hosted Signatures of the Invisible – one of the landmark initiatives in arts and science. In 2012, CERN is now initiating its own science/arts programme Collide@CERN in different arts disciplines. The first of these is in digital arts, and the international competition to find the winning artist is called the Prix Ars Electronica Collide@CERN. It was announced September 2011 at CERN’s first collaboration with an international arts festival – Ars Electronica in Linz. The competition attracted over 395 entries from 40 countries around the world. The winning artist, Julius Von Bismarck, will begin his two month residency here at CERN next month. Ariane Koek who leads on this initiative, discusses the residency programme, as well as the background about Art@CERN. History has shown that particle physics and the arts are great inspiration partners. The publication of the paper by Max Planck which gave birth to quantum mechanics as well as those by Einstein, heavily influenced some of the grea...

CERN and the environment

CERN Multimedia

Corinne Pralavorio

2016-01-01

New webpages answer common questions about CERN and the environment.   One of the new public webpages dedicated to CERN and the environment. Do your neighbours ever ask you about CERN’s environmental impact? And about radiation in particular? If so, the answers to those questions can now be found online on a new set of public webpages dedicated to CERN and the environment. These pages, put together by the Occupational Health, Safety and Environmental Protection (HSE) unit and the groups responsible for CERN's site maintenance, contain a wealth of information on topics linked to the environment, such as biodiversity at CERN, waste management, ionising radiation, and water and electricity consumption. “CERN forms part of the local landscape, with its numerous sites and scientific activities. It’s understandable that people living nearby have questions about the impact of these activities and it’s important that we respond with complete transp...

28 May 2010 - Japanese Ambassador H. Ueda visiting the LHC superconducting magnet test hall with CERN Technology Deputy Department Head L. Rossi.

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1005088 02 Japanese Ambassador H. Ueda (right) visiting the LHC superconducting magnet test hall with Technology Deputy Department Head L. Rossi(left). H. Ueda is accompanied by KEK and ATLAS Collaboration T. Kondo (centre).

CERN Relay Race

CERN Document Server

CERN Running Club

2010-01-01

The CERN relay race will take place around the Meyrin site on Thursday 20 May, starting at 12.15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on the route, and how to register your team for the relay race, can be found at: https://espace.cern.ch/Running-Club/CERN-Relay

Ombudspersons gather at CERN

CERN Multimedia

CERN Bulletin

2012-01-01

On 30 March, Vincent Vuillemin, CERN’s Ombuds, welcomed twelve of his counterparts from Geneva-based international organisations. The guests enjoyed the visit and asked him to arrange another visit in a year or so, when they will be able to visit the LHC underground experimental areas.   Group photo in the Main Building. Vincent Vuillemin, former Head of the EN department, was appointed as CERN's first “Ombuds” in June 2010. The Ombuds is one of the first people who can be consulted when it has not proved possible to resolve a potential interpersonal conflict amicably or with the assistance of the competent hierarchy. “My counterparts from the other international organisations come from different backgrounds to me, mainly from Human Resources,” explains Vincent Vuillemin. “It was quite an experience for them to witness the magnitude of the LHC project when they visited the SM18 hall and the ATLAS Visitor Centre. They were ex...

The voice of Austrians at CERN

CERN Multimedia

2009-01-01

On 7 May the Austrian Minister for Science announced that, after over 50 years of membership, Austria would withdraw from CERN. By 18 May the Austrian Chancellor had reversed the decision. The Bulletin spoke to some of the Austrian community at CERN about the rollercoaster of events in between. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 533, 300, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-posterframe-640x360-at-10-percent.jpg', '1180837', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); To watch this video in German click here. There was jubil...

CernVM - a virtual software appliance for LHC applications

International Nuclear Information System (INIS)

Buncic, P; Sanchez, C Aguado; Blomer, J; Franco, L; Mato, P; Harutyunian, A; Yao, Y

2010-01-01

CernVM is a Virtual Software Appliance capable of running physics applications from the LHC experiments at CERN. It aims to provide a complete and portable environment for developing and running LHC data analysis on any end-user computer (laptop, desktop) as well as on the Grid, independently of Operating System platforms (Linux, Windows, MacOS). The experiment application software and its specific dependencies are built independently from CernVM and delivered to the appliance just in time by means of a CernVM File System (CVMFS) specifically designed for efficient software distribution. The procedures for building, installing and validating software releases remains under the control and responsibility of each user community. We provide a mechanism to publish pre-built and configured experiment software releases to a central distribution point from where it finds its way to the running CernVM instances via the hierarchy of proxy servers or content delivery networks. In this paper, we present current state of CernVM project and compare performance of CVMFS to performance of traditional network file system like AFS and discuss possible scenarios that could further improve its performance and scalability.

CERN Phonebook evolution

CERN Multimedia

Sébastien Dellabella

2012-01-01

Consolidating phonebooks at CERN We have had many phonebooks in the past, Xwho (now decommissioned), the NICE phonebook on Windows PCs, and more recently the web site people.cern.ch. However, diversity doesn’t always equate to improved efficiency or quality. So in order to reduce the maintenance effort and to improve the user experience, we have consolidated these various phonebooks into a single web application: phonebook.cern.ch Motivations for change The NICE Phonebook was introduced in the year 2000 when Windows 95 was the major desktop platform. Since then, a lot has changed not only in technology and the desktop landscape but also in the variety of devices used to access the data (notably smartphones and tablets). Updating the NICE phonebook is slow. Once the master database is modified it can take up to two days for the data to propagate to the application. Thus, we are now planning the retirement of the NICE phonebook application. The new Phonebook.cern.ch The new phonebook.cern.ch...

CERN television news

CERN Multimedia

2002-01-01

CERN events brought right to your desktop by the new video bulletin.   CERN now has its very own news broadcast , or rather 'webcast', with a host of special reports and even a star presenter. From today onwards, just go to the Bulletin's web page, click on the 'video news' link and sit back and enjoy the latest news about CERN, presented in images by Wendy Korda. The ten-minute newscast in both French and English, the Organization's two official languages, presents interviews, pictures of experiments and computer-generated graphics, bringing you right up to date with some of the Laboratory's latest stories. The show concludes with a selection of the best snapshots taken by the CERN Photo Lab. So every one or two months CERN's Audio-Video Service (ETT/DH) will be putting together a video news report that you can watch on your own desktop computer. Daniel Boileau, Patrick Gilbert de Vautibault and Jacques Fichet, the Service's three technicians, came up with the idea of producing this regular feat...

CERN Relay Race

CERN Multimedia

2009-01-01

The CERN relay race, now in its 39th year, is already a well-known tradition, but this year the organizers say the event will have even more of a festival feeling. Just off the starting line of the CERN relay race.For the past few years, spectators and runners at the CERN relay race have been able to enjoy a beer while listening to music from the CERN music and jazz clubs. But this year the organizers are aiming for "even more of a festival atmosphere". As David Nisbet, President of the CERN running club and organizer of the relay race, says: "Work is not just about getting your head down and doing the theory, it’s also about enjoying the company of your colleagues." This year, on top of music from the Santa Luis Band and the Canettes Blues Band, there will be demonstrations from the Aikido and softball clubs, a stretching session by the Fitness club, as well as various stalls and of course, the well-earned beer from AGLUP, the B...

Radiography at CERN

CERN Multimedia

HSE Unit

2014-01-01

What is industrial radiography? It is a non-destructive method with a wide variety of applications, such as inspecting the quality of a weld. It uses high-energy radioactive sources or an X-ray generator.   Is this inspection technique used at CERN? Yes, it is widely used at CERN by the EN-MME Group, which outsources the work to one or more companies, depending on the workload. Is it possible to carry out radiography anywhere at CERN? Yes, it is possible to carry out radiography in any building/accelerator/experiment area at CERN (including in areas which are not normally subject to radiological hazards). When is radiography carried out? It normally takes place outside of working hours (7 p.m. to 6 a.m.). How will I know if radiography is taking place in my building? If this activity is planned in a CERN building, notices will be affixed to all of its main entrance doors at least 24 hours in advance. What are the risks? There is a risk of exposure to very high levels of radiation, dep...

CERN CAR STICKERS

CERN Multimedia

Service Accueil et Controle d'Accès; ST Division

1999-01-01

In accordance with Operational Circular n¡ 2, paragraph 21, CERN car stickers are to be renewed. The new stickers are now available and will be valid for a year.Youare therefore requested:either to obtain them from the distribution points for new stickers (see below); or to send us the application form below, duly completed, via the internal mail; or to complete the application form directly via the Web at the address: http://cern.ch/registration-stickers. Each vehicle has to carry a sticker and needs a separate application form.Vehicles bearing CERN diplomatic plates (CD07, 431K and CD series) do not need a sticker for access to the CERN areas.Thank you.List of distribution points:Registration Service (bldg 55 1st floor), open from 07h30 to 16h30. Building 33 (entrance hall), open from 08h00 to 18h00. Building 120 (ground floor), outside working hours.Name Surname CERN identification number Vehicle registration plates Country issuing the plates Vehicle ma...

Urgent Need of a Doctor outside of CERN

CERN Document Server

2004-01-01

GENEVA PATIENT NOT FIT TO BE MOVED: Call your family doctor Or: SOS MEDECINS (24H/24H) 022 748-49-50 Or: ASSOC. MEDECINS DE GENEVE (07H-23H) 022 322-20-20 PATIENT CAN BE MOVED: • HOPITAL CANTONAL 24 Micheli du Crest 022 372-33-11 / 022 382-33-11 PAEDIATRIC EMERGENCIES 30 Bd de la Cluse 022 382-45-55 MATERNITY 24 Micheli du Crest 022 382-68-16 / 022 382-33-11 CLINIQUE OPHTALMOLOGY 22 Alcide Jentzer 022 382-84-00 • HOPITAL DE LA TOUR Meyrin 022 719-61-11 EMERGENCIES ADULTS Meyrin 022 719-66-80 EMERGENCIES: AMBULANCE (GENEVE AND VAUD) 144 FIRE BRIGADE 118 POLICE 117 ANTI POISON CENTRE (24H/24H) 01-251-51-51 EUROPEAN EMERGENCY CALL  112 REMINDER: For all accidents, incidents, emergencies etc. ON CERN PREMISES: FIRE BRIGADE CERN 022 767-44-44 FRANCE PATIENT NOT FIT TO BE MOVED: Call your family doctor (or 15) PATIENT CAN BE MOVED: • HOPITAL DE ST. JULIEN Rue Amédée VIII de Savoie 04-50-49-65-65 EMERG...

CERN Library | Book presentation: "60 years of CERN experiments and discoveries" | 15 December

CERN Document Server

CERN Library

2015-01-01

"60 years of CERN experiments and discoveries", edited by Herwig Schopper and Luigi Di Lella.   Tuesday 15 December at 16:00 Room C (Building 61) The presentation will be followed by refreshments The book contains a description of the most important experimental results achieved at CERN during the past 60 years, from the mid-1950s to the latest discovery of the Higgs particle. It covers the results from early accelerators at CERN to the most recent results at the LHC and thus provides an excellent review of the achievements of this outstanding laboratory. It reflects not only the impressive scientific progress achieved during the past six decades but demonstrates also the special way of successful international collaboration developed at CERN. The e-book is available in Open Access here thanks to an agreement between CERN and the publisher. "60 years of CERN experiments and discoveries", ed. by Herwig Schopper and Luigi Di Lella, World Scientific, 2015, ISBN 9789...

Courrier CERN

CERN Multimedia

2015-01-01

Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

CERN internal communication is evolving

CERN Multimedia

2016-01-01

CERN news will now be regularly updated on the CERN People page (see here).      Dear readers, All over the world, communication is becoming increasingly instantaneous, with news published in real time on websites and social networks. In order to keep pace with these changes, CERN's internal communication is evolving too. From now on, you will be informed of what’s happening at CERN more often via the “CERN people” page, which will frequently be updated with news. The Bulletin is following this trend too: twice a month, we will compile the most important articles published on the CERN site, with a brand-new layout. You will receive an e-mail every two weeks as soon as this new form of the Bulletin is available. If you have interesting news or stories to share, tell us about them through the form at: https://communications.web.cern.ch/got-story-cern-website​. You can also find out about news from CERN in real time...

A Distributed Monitoring and Control System for the Laser Ion Source RILIS at CERN-ISOLDE

CERN Document Server

AUTHOR|(SzGeCERN)715185; Richter, Detlef; Wendt, Klaus

In this work, the implementation of the LabVIEW-based RILIS Equipment Acquisition and Control Toolset (REACT) software framework is documented, revised, and further developed to accomplish remotely operated in-source laser spectroscopy experiments at CERN-ISOLDE. The Resonance Ionization Laser Ion Source (RILIS) is an integral part of the radioactive ion beam user facility ISOLDE at CERN. Its task as an ion source is to ensure high isobaric purity and production efficiency of the ion beams that are generated for the various experimental setups of the facility. Reliable operation requires directing 3 pulsed laser beams, precisely wavelength-tuned and overlapped in time to a precision of 5 nanoseconds, to converge into a 3mm diameter ion source cavity located 25m away in an inaccessible radioactive environment. These stable conditions have to be maintained for up to 7 days at a time per experiment setup. Within recent years, the array of RILIS equipment and its need to interface with other experimental apparatu...

CERN & Society launches donation portal

CERN Multimedia

Cian O'Luanaigh

2014-01-01

The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

The CERN intersecting storage rings and strong interactions at high energies

CERN Document Server

Cocconi, Giuseppe

1973-01-01

The coming into operation of the Intersecting Storage Rings (ISR) at the European Centre of Nuclear Research (CERN), near Geneva, has made it possible in the past two years to study the behaviour of matter at the highest densities ever obtained artificially, hundreds of times greater than the density of matter in nuclei and even in the densest stars. An account is given of some of the results obtained thus far; this is followed by a brief discussion of possible future developments. (17 refs).

A CERN fireman is an instructor for French-speaking Switzerland

CERN Document Server

Alizée Dauvergne

2010-01-01

Davide Pagnani, a team leader in the CERN Fire Brigade, is a Swiss Federal expert and instructor in the field of interventions involving radioactivity. Firemen from throughout the French-speaking part of Switzerland come to CERN for training exercises supervised by Davide.   Training on the radiation protection techniques.   Before joining the CERN Fire Brigade, Davide Pagnani studied in Rome to be a radiation protection technician working in control rooms. Since joining, he has specialised in interventions in incidents involving radioactive materials. "The CERN firemen are trained in this type of work. If there is a radioactive leak, special measures are needed to protect the firemen, bystanders and the environment", says Davide. The training of qualified firemen in radiation protection is organised in collaboration with the Radiation Protection Group of CERN's Occupational Health and Safety and Environmental Protection Unit (HSE). "I have been collaboratin...

CERN Relay Race 2018

CERN Document Server

CERN Running club

2018-01-01

The CERN running club, in collaboration with the Staff Association, is happy to announce the 2018 relay race edition. It will take place on Thursday, May 24th and will consist as every year in a round trip of the CERN Meyrin site in teams of 6 members. It is a fun event, and you do not have to run fast to enjoy it. Registrations will be open from May 1st to May 22nd on the running club web site. All information concerning the race and the registration are available there too: http://runningclub.web.cern.ch/content/cern-relay-race. A video of the previous edition is also available here : http://cern.ch/go/Nk7C. As every year, there will be animations starting at noon on the lawn in front of restaurant 1, and information stands for many CERN associations and clubs will be available. The running club partners will also be participate in the event, namely Berthie Sport, Interfon and Uniqa.

CERN Yoga club

CERN Multimedia

Le comité du club de yoga du CERN

2017-01-01

Members of the CERN Yoga club are invited to the General Assembly of the club which will take place on: Wednesday 5 July at 14.00 in conference room 504-E-005 (Next to Yoga room) The agenda is available on the club's website: cern.ch/club-yoga/ If you are unable to participate, please elect a proxy voter to vote on your behalf (available from your teacher or in the Yoga room) – these can be addressed to: cernyoga@cern.ch

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1998-01-01

It was thirty years ago that British industry held the first ever trade fair at CERN and industrial links between Britain and the Laboratory have never looked back. Speaking at the opening of the 1998 "Britain at CERN" exhibition on 20 October, H.E. Mr Christopher Hulse, British Ambassador to Switzerland, underlined the value of CERN contracts to British industry saying that "The prize is well worth going for, I understand that contracts worth  1.5bn will be awarded over the next six years".

Get all the official CERN holidays automatically added to your CERN mailbox calendar

CERN Multimedia

CERN Mail Services

2013-01-01

A new tool has been created that makes it easy to check the official CERN holidays. These holidays will appear automatically in your calendar. Currently, to check the official CERN holidays, you had to consult either the CERN website or EDH. Now you can see these holidays in your CERN calendar together with absences, meetings and other events. To take advantage of this feature: add yourself as member of the e-group “holidays-to-calendar” here. You can also use this link. Your calendar will be updated the very next day.

Superconductive technologies for the Large Hadron collider at CERN

CERN Document Server

Rossi, L

2000-01-01

The Large Hadron Collider (LHC) project is the largest plant based on superconductivity and cryogenics: 27 km of tunnel filled with superconducting magnets and other equipment that will be kept at 1.9 K. The dipole magnets have to generate a minimum magnetic field of 8.3 T to allow collisions of proton beams at an energy of 14 TeV in the centre of mass. The construction of LHC started in 1997 at CERN in Geneva and required 10 years of research and development on fine- filament NbTi superconducting wires and cables, on magnet technology and on He-II refrigerators. In particular the project needs the production of about 1000 tons of high-homogeneity NbTi with current densities of more than 2000 A mm/sup -2/ at 9 T and 1.9 K, with tight control also of all other cable properties such as magnetization, interstrand resistance and copper resistivity. The paper describes the main dipole magnets and reviews the most significant steps in the research and development, focusing on the issues related to the conductor, to...

"Infinitely CERN Memories from 50 years of research" CERN and Editions Suzanne Hurter are publishing a beautiful book, "Infinitely CERN", to commemorate the human and scientific adventure of CERN.

CERN Multimedia

Maximilien Brice

2004-01-01

The book tells the history of CERN through the voices of those who lived it. Highlights such as scientific events, technical achievements and CERN's role as an international organization in Geneva, are recalled chronologically by people who witnessed them: administrators, engineers and physicists, including Georges Charpak, Carlo Rubbia and Simon van der Meer, who received the Nobel Prize in physics for discoveries made at CERN.

The on-line repair, improvement and expansion of a working multicomputer control system for the CERN SPS accelerator

International Nuclear Information System (INIS)

Altaber, J.; Beck, F.; Collins, M.; Crowley-Milling, M.C.; Rausch, R.

1979-01-01

The 400 GeV proton synchrotron at CERN was first commissioned in 1976. Those of its features which are pertinent to the design of the control system are summarized. The paper then proceeds as follows: changes to the control system (changes to applications programs, equipment handling routines, system software changes); hardware increases and repairs; changes to the character of the system (hardware changes, microprocessors); conclusions. (U.K.)

A delegation from Singapore came to CERN on 18 October. The visitors are involved in planning a vast Underground Science City housing R&D laboratories and IT data centres.

CERN Multimedia

Hoch, Michael

2010-01-01

They came to learn from civil engineers and safety experts about how CERN plans and constructs its underground facilities. They visited the CMS site at Cessy, including the above-ground control room and the Underground Service Cavern.

Irradiation Facilities at CERN

CERN Document Server

Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

2017-01-01

CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

2005 CERN Relay Race

CERN Multimedia

Patrice Loiez

2005-01-01

The CERN Relay Race takes place each year in May and sees participants from all areas of the CERN staff. The winners in 2005 were The Shabbys with Los Latinos Volantes in second and Charmilles Technologies a close third. To add a touch of colour and levity, the CERN Jazz Club provided music at the finishing line.

Brazil and CERN get closer

CERN Multimedia

2002-01-01

The map of countries affiliated to CERN may in future include Brazil. On a visit to CERN last week, the Brazilian Minister of State for Science and Technology, Ronaldo Mota Sardenberg, expressed his country's interest in closer links to the Laboratory.   Luciano Maiani and the Brazilian Minister of State for Science and Technology Ronaldo Mota Sardenberg shake hands on CERN-Brazil co-operation. During his visit, the Minister and CERN Director General Luciano Maiani issued a joint statement for the continuation of a Co-operation Agreement first established in 1990. They also agreed to study the possibility of Brazil joining CERN-led Grid computing infrastructure projects. Brazilian physicists are already involved in the LHCb, ATLAS and CMS experiments. At the conclusion of the Minister's visit, he and Director-General Maiani agreed to establish a Working Group to examine ways of strengthening Brazil's links with CERN, and to prepare the way for a Brazilian request to CERN Council to become an Observer at th...

President of Chile at CERN

CERN Multimedia

2007-01-01

The President of Chile, Michelle Bachelet, in the ATLAS cavern with, from left to right, Peter Jenni, ATLAS Spokesman, Vivian Heyl, CONICYT President, and Robert Aymar, CERN Director-General. Robert Aymar, CERN Director-General, and Vivian Heyl, CONICYT President, signing a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científica y Tecnológica (CONICYT).The President of Chile, Michelle Bachelet, paid a visit to CERN during her three-day tour of Switzerland. The charismatic Michelle Bachelet and her large delegation were greeted by the CERN Director-General and then taken to see the ATLAS experiment and the LHC. She also took time to meet the Chilean community working at CERN, comprising several physicists in the Theory Group and the ATLAS experiment. The meeting was followed by the signing of a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científi...

Detector Control System for the AFP detector in ATLAS experiment at CERN

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00211068; The ATLAS collaboration; Caforio, Davide; Czekierda, Sabina; Hajduk, Zbigniew; Olszowska, Jolanta; Oleiro Seabra, Luis Filipe; Sicho, Petr

2017-01-01

The ATLAS Forward Proton (AFP) detector consists of two forward detectors located at 205 m and 217 m on either side of the ATLAS experiment. The aim is to measure the momenta and angles of diffractively scattered protons. In 2016, two detector stations on one side of the ATLAS interaction point were installed and commissioned. The detector infrastructure and necessary services were installed and are supervised by the Detector Control System (DCS), which is responsible for the coherent and safe operation of the detector. A large variety of used equipment represents a considerable challenge for the AFP DCS design. Industrial Supervisory Control and Data Acquisition (SCADA) product Siemens WinCCOA, together with the CERN Joint Control Project (JCOP) framework and standard industrial and custom developed server applications and protocols are used for reading, processing, monitoring and archiving of the detector parameters. Graphical user interfaces allow for overall detector operation and visualization of the det...

Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

CERN Multimedia

Françoise Benz

2005-01-01

2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

RSS based CERN Alerter. Information broadcast to all CERN offices.

CERN Multimedia

Otto, R

2007-01-01

Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send "targeted" messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS€™s SPM_quotMESSAGE command, Zephyr and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simpl...

CERN at the Post Office

CERN Multimedia

2006-01-01

In collaboration with CERN and the Conseil général de l'Ain, the French postal services of the Pays de Gex have released a new set of pre-paid envelopes paying tribute to CERN. The envelopes, which come in packets of ten, each featuring a different aspect of CERN, will be on sale from 6 June onwards. They will be available from five post offices in the Pays de Gex (Ferney-Voltaire, Prévessin-Moëns, Saint-Genis-Pouilly, Thoiry and CERN-Prévessin), as well as from the CERN Shop (Reception, Building 33). The envelopes were unveiled at an official ceremony on 23 May, which was attended by Jocelyne Boch, Vice-President of the Conseil général de l'Ain and Mayoress of Thoiry, as well as Marina Combe, Head of the Saint-Genis-Pouilly, Thoiry and CERN-Prévessin post offices, and Maximilian Metzger, CERN's Secretary-General. The last set of envelopes to feature CERN, which commemorated the Laboratory's 50th anniversary in 2004, were a huge success, with sales totalling 35 000 in less than a year. 'We received...

Lectures for CERN pensioners

CERN Multimedia

GS Department

2009-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

CERN openlab Open Day | 10 June

CERN Multimedia

2015-01-01

CERN openlab is now entering an exciting new phase and is expanding to include other public research organisations for the first time. To mark this occasion, a first-of-its-kind ‘CERN openlab Open Day’ event will be held at CERN on 10 June 2015.   CERN openlab is a unique public-private partnership between CERN and leading ICT companies. Its mission is to accelerate the development of cutting-edge solutions to be used by CERN’s scientific community. The ‘CERN openlab Open Day’ event will take place in the Main Auditorium on 10 June and will be an opportunity to learn more about the work carried out through CERN openlab to help tackle the challenges faced by the scientific community. Find out more: http://indico.cern.ch/event/381083/

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

On January 29-30, 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition provides the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States – will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

29-30 January 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition will provide the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States - will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

Observation and control of blinking nitrogen-vacancy centres in discrete nanodiamonds.

Science.gov (United States)

Bradac, C; Gaebel, T; Naidoo, N; Sellars, M J; Twamley, J; Brown, L J; Barnard, A S; Plakhotnik, T; Zvyagin, A V; Rabeau, J R

2010-05-01

Nitrogen-vacancy colour centres in diamond can undergo strong, spin-sensitive optical transitions under ambient conditions, which makes them attractive for applications in quantum optics, nanoscale magnetometry and biolabelling. Although nitrogen-vacancy centres have been observed in aggregated detonation nanodiamonds and milled nanodiamonds, they have not been observed in very small isolated nanodiamonds. Here, we report the first direct observation of nitrogen-vacancy centres in discrete 5-nm nanodiamonds at room temperature, including evidence for intermittency in the luminescence (blinking) from the nanodiamonds. We also show that it is possible to control this blinking by modifying the surface of the nanodiamonds.

Members of the Forum Engelberg visit CERN

CERN Multimedia

Patrice Loïez

2002-01-01

The Forum Engelberg is an annual interdisciplinary conference held in Engelberg, Switzerland intended to act as an international platform for debate and exchange of views on key issues affecting scientific research, technology, economics and philosophy. Its President is Hubert Curien - former French Minister of Research and Space Research, and President of the CERN Council from 1994 to 1996. He is pictured here (centre) with (left to right) Raymond Battistella, Director-General of SIG, Geneva's utilities provider; Michel Della Negra; Marie-Anne Heimo; Jean-Claude Landry; and Bernard Ecoffey, Founder of the Forum Engelberg, in front of the CMS detector under construction. Visible are three of the five concentric rings forming the barrel yoke which returns the magnetic flux generated by the superconducting coil.

People and things. CERN Courier, Sep 1995, v. 35(6)

International Nuclear Information System (INIS)

Anon.

1995-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: At its meeting on 23 June, CERN's governing body, the Council, decided to create an LHC Division as from 1 January 1996. The LHC Division will focus on the core activities related to the construction of the machine, namely superconducting magnets, cryogenics and vacuum together with supporting activities. Jean-Pierre Gourber was appointed Leader of the new LHC Division for three years from 1 January 1996. Council also appointed Bo Angerth as Leader of Personnel Division for three years from 1 January 1996, succeeding Willem Middelkoop. Jiri Niederle (Czech Republic) was elected Vice-President of Council for one year from 1 July 1995. ICTP Trieste Director: Distinguished theorist Miguel Virasoro becomes Director of the International Centre for Theoretical Physics (ICTP), Trieste, succeeding founding Director Abdus Salam, who continues to act as the Centre's President. Born in Buenos Aires, Virasoro has worked in many countries during his career, and comes to ICTP from La Sapienza, Rome, where he has worked since 1982. He was in CERN's Theory Division from 1979- 80, returning after a short summer break to stay until 1983. In elementary particles, he is acknowledged as one of the founders of string theory. He has also studied complex systems, statistical mechanics and neural networks. EPS Prizes: The prestigious High Energy and Particle Physics Prize of the European Physical Society for 1995 goes to Paul Söding, Bjorn Wiik and Gunter Wolf of DESY and Sau Lan Wu of Wisconsin for their milestone work in providing 'first evidence for three-jet events in electron-positron collisions at PETRA' (DESY's electron- positron collider). At DESY, Bjorn Wiik is now Chairman of the DESY Board of Directors, Paul Söding has special responsibility for the high energy physics

People and things. CERN Courier, Sep 1995, v. 35(6)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-09-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: At its meeting on 23 June, CERN's governing body, the Council, decided to create an LHC Division as from 1 January 1996. The LHC Division will focus on the core activities related to the construction of the machine, namely superconducting magnets, cryogenics and vacuum together with supporting activities. Jean-Pierre Gourber was appointed Leader of the new LHC Division for three years from 1 January 1996. Council also appointed Bo Angerth as Leader of Personnel Division for three years from 1 January 1996, succeeding Willem Middelkoop. Jiri Niederle (Czech Republic) was elected Vice-President of Council for one year from 1 July 1995. ICTP Trieste Director: Distinguished theorist Miguel Virasoro becomes Director of the International Centre for Theoretical Physics (ICTP), Trieste, succeeding founding Director Abdus Salam, who continues to act as the Centre's President. Born in Buenos Aires, Virasoro has worked in many countries during his career, and comes to ICTP from La Sapienza, Rome, where he has worked since 1982. He was in CERN's Theory Division from 1979- 80, returning after a short summer break to stay until 1983. In elementary particles, he is acknowledged as one of the founders of string theory. He has also studied complex systems, statistical mechanics and neural networks. EPS Prizes: The prestigious High Energy and Particle Physics Prize of the European Physical Society for 1995 goes to Paul Söding, Bjorn Wiik and Gunter Wolf of DESY and Sau Lan Wu of Wisconsin for their milestone work in providing 'first evidence for three-jet events in electron-positron collisions at PETRA' (DESY's electron- positron collider). At DESY, Bjorn Wiik is now Chairman of the DESY Board of Directors, Paul Söding has special responsibility for the high energy physics institute atZeuthen, Berlin, and

Enhancing Safety at Airline Operations Control Centre

Directory of Open Access Journals (Sweden)

Lukáš Řasa

2015-04-01

Full Text Available In recent years a new term of Safety Management System (SMS has been introduced into aviation legislation. This system is being adopted by airline operators. One of the groundbased actors of everyday operations is Operations Control Centre (OCC. The goal of this article has been to identify and assess risks and dangers which occur at OCC and create a template for OCC implementation into SMS.

In the CERN Library

CERN Multimedia

CERN PhotoLab

1963-01-01

Seen in this picture is Noria Christophoridou, librarian of the Greek Atomic Energy Commission, who has been sent by her government to CERN for a year to widen her experience of library and documentation services. In the photograph she is providing information to Kurt Gottfried, a CERN visiting scientist from Harvard University, who is spending a year with CERN's Theory Division

Become a CERN WhiteHat

CERN Multimedia

CERN. Geneva

2014-01-01

Discovering CERN's weaknesses is as important as ever. Become a CERN WhiteHat and help us poking around CERN computing services and web applications. All you need is to apply and get the appropriate training...

Running a reliable messaging infrastructure for CERN's control system

International Nuclear Information System (INIS)

Ehm, F.

2012-01-01

The current middle-ware for CERN's Control System is based on 2 implementations: CORBA-based Controls Middle-Ware (CMW) and Java Messaging Service (JMS). The JMS service is realized using the open source messaging product ActiveMQ and had became an increasing vital part of beam operations as data need to be transported reliably for various areas such as the beam protection system, post mortem analysis, beam commissioning or the alarm system. The current JMS service is made of 18 brokers running either in clusters or as single nodes. The main service is deployed as a 2 node cluster providing fail-over and load balancing capabilities for high availability. Non-critical applications running on virtual machines or desktop machines read data via a third broker to decouple the load from the operational main cluster. This scenario has been introduced last year and the statistics showed an up-time of 99.998% and an average data serving rate of 1.6 G-Byte per minute represented by around 150 messages per second. Deploying, running, maintaining and protecting such messaging infrastructure is not trivial and includes setting up of careful monitoring and failure pre-recognition. Naturally, lessons have been learnt and their outcome is very important for the current and future operation of such service. (author)

Iran approaches CERN

CERN Multimedia

2002-01-01

Members of Parliament from the Islamic Republic of Iran visit SM18. From left to right : Ali Mojtahed-Shabestari, Deputy Ambassador of the Islamic Republic of Iran in Geneva, Diether Blechschmidt, from CERN, Abdol-Rahim Baharvand and Hossain Amiri, from the Iranian Parliament, Norbert Siegel, from CERN, Hossain Afarideh, Rasool Seddighi and Ahmad Shirzad from the Iranian Parliament. Five members of the Parliament of the Islamic Republic of Iran visited CERN for three days at the beginning of May. All of them have PhD's in Physics, as well as holding their job in politics. They are involved in legislation for science, research and education funding in Iran. Apart from their interest in CERN in general, they were especially attracted to the CMS detector, since an Iranian contribution to the LHC is now starting through a collaboration with the Institute for Studies in Theoretical Physics and Mathematics in Tehran.

Study of chi production properties at the CERN Intersecting Storage Rings

International Nuclear Information System (INIS)

Kourkoumelis, C.; Resvanis, L.K.; Filippas, T.A.; Fokitis, E.; Fabjan, C.W.; Fields, T.; Fowler, E.; Lissauer, D.; Mannelli, I.; Mouzourakis, P.; Nappi, A.; Willis, W.J.; Goldberg, M.

1979-01-01

The inclusive production of electron pairs with and without additional photons was measured at the CERN Intersecting Storage Rings (ISR). The investigation of J/psi particles with associated photons indicated that 47 +- 8% of the J/psi were produced via the photonic decay of one of the chi(3.5) states. The upper limit of the production cross-section ratio times the branching ratio into electron pairs of psi' relative to J/psi was found to be 2% at centre-of-mass energy of √s = 62 GeV. (Auth.)

8 April 2011 - Brazilian Minister of State for Science and Technology A. Mercadante Oliva signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss; in the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni; visiting LHC superconducting magnet test hall with J.M. Jimenez.

CERN Multimedia

Maximilien Brice

2011-01-01

8 April 2011 - Brazilian Minister of State for Science and Technology A. Mercadante Oliva signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss; in the ATLAS visitor centre with Collaboration Former Spokesperson P. Jenni; visiting LHC superconducting magnet test hall with J.M. Jimenez.

Controlled longitudinal emittance blow-up using band-limited phase noise in CERN PSB

Science.gov (United States)

Quartullo, D.; Shaposhnikova, E.; Timko, H.

2017-07-01

Controlled longitudinal emittance blow-up (from 1 eVs to 1.4 eVs) for LHC beams in the CERN PS Booster is currently achievied using sinusoidal phase modulation of a dedicated high-harmonic RF system. In 2021, after the LHC injectors upgrade, 3 eVs should be extracted to the PS. Even if the current method may satisfy the new requirements, it relies on low-power level RF improvements. In this paper another method of blow-up was considered, that is the injection of band-limited phase noise in the main RF system (h=1), never tried in PSB but already used in CERN SPS and LHC, under different conditions (longer cycles). This technique, which lowers the peak line density and therefore the impact of intensity effects in the PSB and the PS, can also be complementary to the present method. The longitudinal space charge, dominant in the PSB, causes significant synchrotron frequency shifts with intensity, and its effect should be taken into account. Another complication arises from the interaction of the phase loop with the injected noise, since both act on the RF phase. All these elements were studied in simulations of the PSB cycle with the BLonD code, and the required blow-up was achieved.

CERN: SC-33

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-06-15

On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service.

14 February 2012 - Vice-President of the Senate of the Parliament of the Czech Republic A. Gajduskova signing the guest book with CERN Director-General R. Heuer; visiting ATLAS experimental area with Collaboration Spokesperson F. Gianotti. Ambassador Sequensova to the UN accompanies the Vice-President.

CERN Document Server

Maximilien Brice

2012-01-01

Vice-president of the Senate of the Parliament of the Czech Republic, Alena Gajduskova was welcomed to CERN by Rolf Heuer, CERN’s director-general, on 14 and 15 February. Her time at CERN included the ATLAS Visitor Centre and underground experimental area, the LHC tunnel, the LHC superconducting-magnet test hall and the ALICE underground experimental area. She also heard a presentation on the LHC Computing Grid Project at CERN’s Computer Centre.

NEWS: A trip to CERN

Science.gov (United States)

Ellison, A. D.

2000-07-01

the canteen. Over lunch we mixed with physicists of many different nationalities and backgrounds. Figure 1 Figure 1. In the afternoon we visited Microcosm, the CERN visitors centre, and the LEP control room and also the SPS. Here the students learned new applications for much of the physics of standing waves and resonance that they had been taught in the classroom. Later that night, we visited a bowling alley where momentum and collision theory were put into practice. The following morning we returned to CERN and visited the large magnet testing facility. Here again physics was brought to life. We saw superconducting magnets being assembled and tested and the students gained a real appreciation of the problems and principles involved. The afternoon was rounded off by a visit to a science museum in Geneva - well worth a visit, as some of us still use some of the apparatus on display. Friday was our last full day so we visited Chamonix in the northern Alps. In the morning, we ascended the Aiguille de Midi - by cable car. Twenty minutes and 3842 m later we emerged into 50 km h-1 winds and -10 °C temperature, not counting the -10 °C wind chill factor. A crisp packet provided an unusual demonstration of the effects of air pressure (figure 2). Figure 2 Figure 2. The views from the summit were very spectacular though a few people experienced mild altitude sickness. That afternoon the party went to the Mer de Glace. Being inside a 3 million year-old structure moving down a mountain at 3 cm per day was an interesting experience, as was a tot of whisky with 3 million year-old water. Once again the local scenery was very photogenic and the click and whirr of cameras was a constant background noise. Saturday morning saw an early start for the long drive home. Most students - and some staff - took the opportunity to catch up on their sleep. Thanks are due to many people without whom the trip would never have taken place. Anne Craige, Stuart Williams

Lectures for CERN pensioners

CERN Multimedia

SC Unit

2008-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

Romanian President Visits CERN

CERN Multimedia

2001-01-01

Director General Luciano Maiani watches as Romanian President Ion Iliescu signs the CERN guest book. On Friday the 12th of October, Romanian President Ion Iliescu arrived at CERN and was warmly greeted by Director General Luciano Maiani at the steps of building 500. After initial greetings and a general presentation of the laboratory, President Iliescu and his entourage embarked on a whistle stop tour of the CERN facilities. They visited the CMS magnet assembly hall and civil engineering work where presentations were made by CMS spokesperson Michel Della Negra and the ATLAS Tile Calorimeter where the president was introduced to Romanian physicists working here at CERN. Michel Della Negra explains some of the general principles behind CMS to President Iliescu during his visit last week. The Romanian teams working on CERN projects make very visible contributions, for example to the construction of the ATLAS experiment and to the preparation of its eventual scientific exploitation. 'Those of us on the ATLAS ...

EU Commissioner visits CERN

CERN Multimedia

2005-01-01

European Commissioner Viviane Reding in front of one of the computers showing how the Grid works and, from left to right, Robert Aymar, CERN's Director-General, Wolfgang von Rüden, Head of the Information Technology Department, and Bob Jones, the newly appointed director of the EGEE project since 1st November. Viviane Reding, European Commissioner for Information Society and Media, visited CERN on 28 October. Accompanied throughout by CERN's Director-General, Robert Aymar, and the Head of the Information Technology Department, Wolfgang von Rüden, the Commissioner visited the ATLAS cavern before going on to the Information Technology Department, where she was given a complete overview of CERN's activities in the strategic field of Grid computing. Viviane Reding's visit coincided with the end of the EGEE (Enabling Grids for E-sciencE) conference, which took place in Pisa in Italy. Co-ordinated by CERN and funded by the European Commission, the EGEE project aims to set up a worldwide grid infrastructure for sc...

A sit-ski design aimed at controlling centre of mass and inertia.

Science.gov (United States)

Langelier, Eve; Martel, Stéphane; Millot, Anne; Lessard, Jean-Luc; Smeesters, Cécile; Rancourt, Denis

2013-01-01

This article introduces a sit-ski developed for the Canadian Alpine Ski Team in view of the Vancouver 2010 Paralympic games. The design is predominantly based on controlling the mass distribution of the sit-ski, a critical factor in skiing performance and control. Both the antero-posterior location of the centre of mass and the sit-ski moment of inertia were addressed in our design. Our design provides means to adjust the antero-posterior centre of mass location of a sit-ski to compensate for masses that would tend to move the antero-posterior centre of mass location away from the midline of the binding area along the ski axis. The adjustment range provided is as large as 140 mm, thereby providing sufficient adaptability for most situations. The suspension mechanism selected is a four-bar linkage optimised to limit antero-posterior seat movement, due to suspension compression, to 7 mm maximum. This is about 5% of the maximum antero-posterior centre of mass control capacity (151 mm) of a human participant. Foot rest inclination was included in the design to modify the sit-ski inertia by as much as 11%. Together, these mass adjustment features were shown to drastically help athletes' skiing performance.

Punctualizaciones del CERN

CERN Multimedia

2002-01-01

"Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

14th September 2010 - UK Birmingham University Vice Chancellor D. Eastwood signing the guest book with Director for Accelerators and Technology S. Myers (CERN-HI-1009225 13-22)

CERN Multimedia

Maximilien Brice

2010-01-01

(CERN-HI-1009225 02-12): visiting the LHC superconducting magnet test hall with Beams Department Head P. Collier; (CERN-HI-1009225 27-34): visiting the ATLAS visitor centre with Collaboration Spokesperson F. Gianotti and Deputy D. Charlton, University of Birmingham. D.Eastwood is accompnied by Pro-Vice-Chancellor and Head of College (Engineering and Physical Sciences) N. Weatherill and Head of School, School of Physics & Astronomy A.Schofield.

CERN meets Facebook

CERN Multimedia

2012-01-01

Social networking sites like LinkedIn, MySpace, Google+ and Facebook are on the rise. In particular, the life of youngsters revolves more and more around these sites as they facilitate communication, networking and the exchange of niceties. Who does not today already have an account registered with one of them? A Facebook profile can contain photos, listings of hobbies, job information, preferences…   The on-going effort to externalise some of CERN's computing resources continues, and in order to promote a unified interface for personal information, CERN has decided to establish a partnership with Facebook starting on 1stApril. "CERN is a public and trustworthy international organisation, and as such, our staff and users have nothing to hide from the general public," said Alexi Spiner (IT), project leader responsible for this migration: * The computer profiles of all CERN users will be integrated into the Facebook portal; * In addition, we will also ...

Safety at CERN

CERN Document Server

2009-01-01

Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

DESY greets CERN

CERN Multimedia