WorldWideScience

Sample records for automobiles

  1. Code Recognition Device for Automobile, a Panacea for Automobiles Theft

    Directory of Open Access Journals (Sweden)

    Ozomata David AHMED

    2011-06-01

    Full Text Available Code Recognition Device is a security device for automobiles. It responds only to the right sequence of codes that are keyed from the key pad. This closes the electrical circuitry of the automobile and enables it to start. If a wrong key is touched, it resets the device which disengages the electrical circuit of the automobile from the power supply. The device works properly on closing all the doors of the automobile, otherwise it cannot start. Also, once the automobile is in operation, opening of any door will disengage the device and the engine will stop. To restart the engine, the doors must be closed and the codes rendered sequentially-in this case the codes are 1974.

  2. 32 CFR 220.11 - Special rules for automobile liability insurance and no-fault automobile insurance.

    Science.gov (United States)

    2010-07-01

    ... and no-fault automobile insurance. 220.11 Section 220.11 National Defense Department of Defense... insurance and no-fault automobile insurance. (a) Active duty members covered. In addition to Uniformed.... 1095 and this part. (c) Exclusion of automobile liability insurance and no-fault automobile insurance...

  3. Okoliš i automobil

    Directory of Open Access Journals (Sweden)

    Nada Štrumberger

    2012-10-01

    Full Text Available Constant increase of the number of automobiles causes demand for individual materials to get on the rise, thus giving an impulse to the development of recycling logistics. Used automobiles get disassembled and individual parts which can be used as raw materials or additives get recycled. Automobile tires can be reclaimed or vulcanized. In July 1978 the environmental-friendly "Blauer Engel" or "Blue Angel" symbol was first introduced for reclaimed tires. Later, emblems were introduced for other recycled automobile pans. The awarding of the emblem is being controlled and approved by authorized institutes, because the emblem rightfully designates traffic safety.

  4. Consumer preferences for automobile energy-efficiency grades

    International Nuclear Information System (INIS)

    Koo, Yoonmo; Kim, Chang Seob; Hong, Junhee; Choi, Ie-Jung; Lee, Jongsu

    2012-01-01

    Recently, increases in energy prices have made energy conservation and efficiency improvements even more essential than in the past. However, consumers experience difficulty in obtaining reliable information regarding energy efficiency, so that many countries have implemented regulations to enforce energy-efficiency grade labeling. In this study, consumer preferences regarding energy efficiency grades are analyzed by the mixed logit and MDCEV model based on the revealed preference data of past automobile purchases. Findings show that consumers rationally apply information on energy efficiency grades when purchasing automobiles. However, they tend to show inefficiency in automobile usage patterns. This study discusses political implications of energy efficiency policies as they might impact consumer behaviors of automobile purchase and usage. - Highlights: ► We model discrete choice model to evaluate energy-efficiency grade regulation. ► Consumers apply information on energy efficiency grades when purchasing automobiles. ► However, they tend to show inefficiency in automobile usage patterns. ► The policies for efficient automobile usage are discussed.

  5. Geotechnical Monitoring of the Automobile Road

    Science.gov (United States)

    Matsiy, Vladimir

    2017-12-01

    In the present article, the results of geotechnical monitoring of A-147 automobile road “Dzhubga-Sochi” are given. Some sections of the automobile road suffered from the landslide adjustment movements; it resulted in many deformations of the retaining structures, the damages of the roadbed and ground crawling over the retaining walls. The observation data made it possible to specify the borders of the active landslide and to form a forecast of the landslide activity in the sections of the automobile roads. Due to monitoring being carried out, there was substantiated the necessity to correct the service forms and records connected with the automobile road reconstruction.

  6. The Hybrid Automobile and the Atkinson Cycle

    Science.gov (United States)

    Feldman, Bernard J.

    2008-01-01

    The hybrid automobile is a strikingly new automobile technology with a number of new technological features that dramatically improve energy efficiency. This paper will briefly describe how hybrid automobiles work; what are these new technological features; why the Toyota Prius hybrid internal combustion engine operates on the Atkinson cycle…

  7. Historical Financial Data - Domestic Automobile Manufacturers

    Science.gov (United States)

    1979-01-01

    A historical financial data base was developed for the four major U.S. automobile manufacturers, focusing on the specific operations associated with production and marketing of automobiles and light trucks. The years subject to analysis were 1967-197...

  8. Recent trends in automobile recycling: An energy and economic assessment

    Energy Technology Data Exchange (ETDEWEB)

    Curlee, T.R.; Das, S.; Rizy, C.G. [Oak Ridge National Lab., TN (United States); Schexanyder, S.M. [Tennessee Univ., Knoxville, TN (United States). Dept. of Biochemistry

    1994-03-01

    Recent and anticipated trends in the material composition of domestic and imported automobiles and the increasing cost of landfilling the non-recyclable portion of automobiles (automobile shredder residue or ASR) pose questions about the future of automobile recycling. This report documents the findings of a study sponsored by the US Department of Energy`s Office of Environmental Analysis to examine the impacts of these and other relevant trends on the life-cycle energy consumption of automobiles and on the economic viability of the domestic automobile recycling industry. More specifically, the study (1) reviewed the status of the automobile recycling industry in the United States, including the current technologies used to process scrapped automobiles and the challenges facing the automobile recycling industry; (2) examined the current status and future trends of automobile recycling in Europe and Japan, with the objectives of identifying ``lessons learned`` and pinpointing differences between those areas and the United States; (3) developed estimates of the energy system impacts of the recycling status quo and projections of the probable energy impacts of alternative technical and institutional approaches to recycling; and (4) identified the key policy questions that will determine the future economic viability of automobile shredder facilities in the United States.

  9. Contact Dermatitis In Automobile Repair workers

    Directory of Open Access Journals (Sweden)

    Joshi M P

    1997-01-01

    Full Text Available Automobile repair workers are at risk of developing skin morbidity including occupational dermatoses because of their exposure to mineral oils, petroleum products and its derivatives and lubricating oil. This cross- sectional study was carried out at Maharashtra State Road Transport Corporation workshops in Nagpur city to investigate prevalence of skin morbidity including contact dermatitis in automobile repair workers. The study included 288 (49.9% automobile repair workers 180 (31.3% workshop office staff and 109 (18.8% divisional office employees. Dermatitis was the commonest skin morbidity in all the study subjects and it was significantly more prevalent in automobile repair workers. Folliculitis was detected in 13.2% of auto â€" repair workers and was not seen in the other two groups. Increasing trend of skin morbidity was correlated with the length of service of employees. Proper protective measures along with suitable washing facilities should be provided

  10. The challenges of automobile-dependent urban transport strategy

    Directory of Open Access Journals (Sweden)

    Jovanović Miomir

    2015-01-01

    Full Text Available The fundamental aims of sustainable urban development and the pro-automobile oriented economic development are on a collision course. It is obvious that automobile-dependent urban development is under heavy/powerful influence of the automobile lobby (automobile and oil industries, along with construction. In this domain famous land-use-transportation studies (or ‘grand transportation studies’ are, unfortunately, still prevailing - a vicious circle of self-fulfilling prophecy of congestion, road building, sprawl, congestion and more road building. Until recently, it was commonly thought that investment in public transport was not economically sustainable and that focusing on the development of the automobile industry and financing the construction of roadways stimulated economic growth. In this paper we clearly show that automobile industry is now overcapitalized, less profitable than many other industries (and may become even less profitable in the future, that transport market is characterized with huge distortions (more than a third of motor-vehicle use can be explained by underpriced driving, while new road investment does not have a major impact on economic growth (especially in a region with an already well-developed infrastructure, and that pro-automobile transport strategy inexorably incurs harmful global, regional and local ecological consequences. [Projekat Ministarstva nauke Republike Srbije, br. 37010

  11. Can urban rail transit curb automobile energy consumption?

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    With the rapid development of China's economy and the speed of urbanization, China's automobile sector has experienced rapid development. The rapid development of the automobile sector has increased energy consumption. According to the results of this paper, automobile energy consumption accounted for about 10.73% of total energy consumption in China in 2015, about 3.6 times the proportion a decade ago. With the deterioration of urban traffic conditions, relying on expanding the amount of vehicles and city road network cannot solve the problem. Urban rail transit is energy-saving and less-polluting, uses less space, has large capacity, and secure. Urban rail transit, according to the principle of sustainable development, is a green transportation system and should be especially adopted for large and medium-sized cities. The paper uses the binary choice model (Probit and Logit) to analyze the main factors influencing the development of rail transit in Chinese cities, and whether automobile energy consumption is the reason for the construction of urban rail transit. Secondly, we analyze the influence of urban rail transit on automobile energy consumption using DID model. The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly, with continuous impact in the second year. - Highlights: • Investigate the main factors influencing the building of rail transit for Chinese cities. • Analyze the influence of urban rail transit on automobile energy consumption by DID model. • The results indicate that the construction of urban rail traffic can restrain automobile energy consumption significantly.

  12. Promotion Models and Achievements of New-energy Automobiles in Shenzhen

    Science.gov (United States)

    Cai, Yu; Xiong, Siqin; Bai, Bo; Ma, Xiaoming

    2017-08-01

    As one of the pilot cities in China for demonstration and promotion of new-energy automobiles, Shenzhen, driven by the “two engines” of the government and the market, has made swift progress in promotion of its new-energy automobiles. This paper analyses Shenzhen’s governmental promotion policy concerning new-energy automobiles, summarizes Shenzhen’s commercial models for promoting new-energy automobiles, and is expected to provide reference for other provinces and cities to promote new-energy automobiles.

  13. The future role of the automobile in Canada. Le role future de l'automobile au Canada

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A.M.

    1982-03-01

    This paper describes the future role of the automobile from an intercity transportation perspective in multimodal contexts; it identifies courses of action open to Transport Canada officials in support of the suggested role. Discussed here is the automobile's multifaceted role, focussing mainly on its use as a mode of door-to-door travel for short trips, a feeder as well as an adjunct to public modes, a means of avoiding excessible public expenditure in highly subsidized public modes (e.g., rail), and a means for providing basic mobility in regional travel contexts. This study goes beyond the 1979 Transport Canada report with the same title by recommending courses of action that might assist officials in formulating policy, planning and other endeavours. At the outset, updated information is provided on the current status and future outlook of selected important factors that affect the future transportation role of the automobile. Against this background, the relevance of major findings of the 1979 automobile report are reviewed and gaps in knowledge identified. On the basis of this information, a future role for the automobile is discussed, with appropriate courses of action recommended. These recommendations and their institutional/program implications are addressed to Transport Canada in the areas of strategic planning and policy, energy planning, safety and coordination of actions/programs with other federal government departments and provincial governments. 48 refs., 8 tabs.

  14. Asbestos-related diseases in automobile mechanics.

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyse the frequency of pleural and parenchymal abnormalities on high-resolution computed tomography (HRCT) in a population of automobile mechanics. The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos-related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers; who in the case of disagreement discussed until they reached agreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Pleural plaques were observed in five cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in one case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers.

  15. Asbestos-related diseases in automobile mechanics

    Science.gov (United States)

    Ameille, Jacques; Rosenberg, Nicole; Matrat, Mireille; Descatha, Alexis; Mompoint, Dominique; Hamzi, Lounis; Atassi, Catherine; Vasile, Manuela; Garnier, Robert; Pairon, Jean-Claude

    2012-01-01

    Purpose Automobile mechanics have been exposed to asbestos in the past, mainly due to the presence of chrysotile asbestos in brakes and clutches. Despite the large number of automobile mechanics, little is known about the non-malignant respiratory diseases observed in this population. The aim of this retrospective multicenter study was to analyze the frequency of pleural and parenchymal abnormalities on HRCT in a population of automobile mechanics. Methods The study population consisted of 103 automobile mechanics with no other source of occupational exposure to asbestos, referred to three occupational health departments in the Paris area for systematic screening of asbestos–related diseases. All subjects were examined by HRCT and all images were reviewed separately by two independent readers, with further consensus in the case of disagreement. Multiple logistic regression models were constructed to investigate factors associated with pleural plaques. Results Pleural plaques were observed in 5 cases (4.9%) and interstitial abnormalities consistent with asbestosis were observed in 1 case. After adjustment for age, smoking status, and a history of non-asbestos-related respiratory diseases, multiple logistic regression models showed a significant association between the duration of exposure to asbestos and pleural plaques. Conclusions The asbestos exposure experienced by automobile mechanics may lead to pleural plaques. The low prevalence of non-malignant asbestos-related diseases, using a very sensitive diagnostic tool, is in favor of a low cumulative exposure to asbestos in this population of workers. PMID:21965465

  16. The construction of a Danish automobile culture

    DEFF Research Database (Denmark)

    Wagner, Michael

    The aim of this article is to discuss the way the automobile was introduced and promoted as a vehicle for modern leisure life in Denmark 1900-1970., and to demonstrate how automobilism was constructed around an ideology of consumption for leisure and recreation....

  17. Nitrosamines in new automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Fine, D H; Reisch, J; Rounbehler, D P

    1980-01-01

    The volatile nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMOR), N-nitrosodiethylamine (NDEA) and possibly N-nitrosodibutylamine (NDBA) have been found to be present as airborne pollutants in the interiors of new (1979 model) automobiles. In the 38 automobiles tested, the levels ranged from 0.07 to 0.83 micrograms/m3 (average 0.3 micrograms/m3) for NDMA, from 0.07 to 2.5 micrograms/m3 (average 0.67 micrograms/m3) for NMOR, from 0.04 to 0.39 micrograms/m3 (average 0.11 micrograms/m3) for NDEA and trace levels (less than 0.01 micrograms/m3) for NDMA.

  18. Automobile Starting and Lighting System Maintenance Training ...

    African Journals Online (AJOL)

    The purpose of this study is to develop automobile starting and lighting system maintenance training manual for technical college students. Research and Development (R and D) design was adopted for the study. The population of the study is 348, comprising of 76 auto-mechanics teachers, 36 automobile supervisors and ...

  19. Credit constraints, consumer leasing and the automobile replacement decision

    OpenAIRE

    Kathleen W. Johnson

    1999-01-01

    This paper presents a model of consumer automobile replacement in the presence of leasing. The model incorporates credit constraints to distinguish between the leasing and purchasing options. It demonstrates how leasing increases the probability that a household replaces its automobile and how households that lease choose higher quality automobiles. The qualitative choice model of the household's decision to lease provides support for the observation that households that lease face credit con...

  20. History of automobiles; Jidosha no rekishi

    Energy Technology Data Exchange (ETDEWEB)

    Iguchi, M. [Japan Automobile Research Institute Inc., Tsukuba (Japan)

    2000-01-01

    Major automobile production regions moved every-time an innovational automotive technology was invented. When product technology, mass production technology and commercializing technology, product technology for medium and small cars, and lean production technology have emerged in the century, major production regions moved from West Europe to the U.S.,. to revived West Europe again, and Japan joined in the regions successively. A future problem is what technology will change the world distribution of automobile production regions. (author)

  1. Automobile Club CERN

    CERN Multimedia

    Automobile Club CERN

    2010-01-01

     L’Assemblée Générale Ordinaire de «L’Automobile Club du CERN» s’est tenue le mercredi 12 janvier 2010. Le Président, J. Pierlot, souhaite la bienvenue aux membres présents, annonce l’agenda et résume les activités et événements du club pour l’année 2009. Le Club compte environ 600 membres, une petite diminution par rapport aux précédentes années dû surtout aux départs anticipés à la retraite. La cotisation reste inchangée : 50 CHF. Notre trésorier, E. Squadrani, présente de façon détaillée la situation du compte d’exploitation pour 2009 ainsi que le bilan de l’Automobile Club. Les comptes sont équilibrés, la situation de la trés...

  2. Globalization of the automobile industry: traditional locations under pressure?

    OpenAIRE

    Spatz, Julius; Nunnenkamp, Peter

    2004-01-01

    Even though the automobile industry is technologically advanced, the increasing integration of low-income countries into the global division of labor has put competitive pressure on traditional automobile producing countries. New end-producers emerged in Asia, Latin America as well as Southern and Central Europe. In addition, the automobile industries of Germany, Japan and the United States engaged in outsourcing of relatively labor intensive segments of the value chain, especially on a regio...

  3. DESIGNING OF AN AUTOMOBILE FLEET NETWORK

    Directory of Open Access Journals (Sweden)

    R. B. Ivut

    2016-01-01

    Full Text Available Investment volume is considered as an important factor in regional development under current conditions. Logistical infrastructure which ensures a complex transport, distributive, information and other services exerts a significant influence on regional investment attractiveness. Lack of clear vision on development and execution of development strategy for logistics infrastructure from the side of regional authorities results in unwillingness of large federal and transnational companies to provide investments in infrastructure projects. Network of automotive transport terminals is one of the main elements in logistics infrastructure. The network allows to optimize a flow of material goods from the point of their origin to the point of their consumption with the lowest possible costs and the required level of service. Automobile transport is one of the main objects of transport infrastructure and it is characterized by rather high flexibility in comparison with other types of transport facilities that preconditions its widespread application. Network of automobile fleets (terminals has been formed for redistribution of goods traffic within the concerned regions. The purpose of the present research is to develop a mathematical model for formation of transport infrastructure on the territory of regions. The paper proposes an approach for formation of automobile fleet (terminal network on the territory of a large region with due account of the established network of distribution and sorting-out warehouse facilities. A model has been developed for solving the problem pertaining to minimization of aggregate costs related to maintenance of automobile fleets, delivery of goods to and from distribution and sorting-out warehouse facilities to consumers, ferry of empty trucks and goods handling. The model makes it possible to determine optimal number and location area of automobile fleets (terminals while accounting for their possible locations, capacity

  4. Automobile technology in a CO{sub 2}-constrained world

    Energy Technology Data Exchange (ETDEWEB)

    Kypreos, S; Barreto Gomez, L; Dietrich, Ph [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Schafer, A; Jacoby, H D [MIT, Cambridge (United States)

    1999-08-01

    This study identifies the environmental conditions under which less CO{sub 2}-emitting and more expensive automobile technology might enter the North American transportation sector. For that purpose, different exogenous CO{sub 2}-reduction targets are imposed and the resulting market shares of hypothetical future automobile technologies calculated. The criteria for the selection of different types of automobiles/fuels is the minimisation of discounted, cumulative transport sector costs over the scenario time horizon. (author) 1 tab., 6 refs.

  5. Environmental implications of the automobile

    International Nuclear Information System (INIS)

    1993-01-01

    There are over 12 million automobiles in Canada, each travelling over 16,000 km annually. The value of motor vehicles and parts produced in Canada accounts for over 6% of the gross domestic product, and vehicle-related sales account for the largest proportion of Canadian retail activity. The environmental issues related to the high impact of the automobile on Canadian life are discussed. In the manufacture of motor vehicles, over 2 billion kg of metal are used a year; although much of this comes from recycled materials, some depletion of nonrenewable resources is required. It is also estimated that 66-105 GJ of energy are needed to produce a motor vehicle, equivalent to as much as 20% of all the energy consumed during the vehicle's lifetime. Environmental impacts result from this use of resources and energy, including land disturbances and air pollution. Land use impacts are also those related to appropriation of urban and rural land for roadway and service uses, plus pollution of adjoining lands by road runoff. In 1990, the transportation sector used 29% of end-use energy, of which retail gasoline sales for motor vehicles accounted for 54%. Environmental impacts from oil refining, fuel combustion, and waste disposal are described, and programs to mitigate these impacts are outlined. Significant reductions in automobile emissions have already occurred from the increased use of emission control devices, improved fuel efficiency, and stricter standards. Further improvements are possible via such means as better manufacturing procedures, increased recycling of automobile components, better inspection and maintenance, and use of alternative fuels and alternate transportation modes. 35 refs., 3 figs., 4 tabs

  6. Automobile control technology and traffic control

    Energy Technology Data Exchange (ETDEWEB)

    Takaba, Sadao [Univ. of Tokyo (Japan)

    1988-09-05

    In the field of automobile control technology, electronic was first adopted for the electronic fuel control as an answer to the exhaust gas regulations. The operations of the driving system, frame system or the automobile itself which is the combination of the two were optimized by adding sensors, computers, actuators, etc. to alleviate the burden of the driver, offering easier drivability and confortableness. For local driving control, measurement of distance up to obstacle has been practiced using the ultrasonic radar sensor. Research and development of microwave radar sensor have been carried out for years. Automatic driving has been a dream technology, and the study for the technology was started since early times. Remarkable progress was made recently in the navigation system for traffic control in wide area. New automobile traffic information communication and other systems are being developed. Historical description is made on the control and information systems for road transportation, dividing the period into the 1st, 2nd and 3rd generations. 10 references.

  7. Effects of automobile battery wastes on physicochemical properties ...

    African Journals Online (AJOL)

    Difference in soil qualities has been noticeable in many soils due to anthropogenic sources, especially of automobile battery wastes. This study examines the effects of automobile battery wastes on the physicochemical properties of the soil. Soil samples for this study were collected in triplicates from three battery chargers' ...

  8. Environmental practices of the auxiliary companies to the Spanish automobile industry

    Science.gov (United States)

    González-Torre, Pilar L.; González, Beatriz A.; Gupta, Surendra M.

    2005-11-01

    The automobile manufacturing industry plays a very important role in a country's economy. The importance of automobile manufacturing industry lies in its sheer size and complexity in terms of the direct and indirect influence it commands across many other industries. While millions of people are employed in the automobile manufacturing industry, it is estimated that more than two and half times that number are employed in the auxiliary companies that supply parts to the automobile manufacturing companies. The auxiliary companies represent a group of businesses of various sizes, types, and geographical locations, producing a vast variety of products ranging from the very simple to the extremely intricate. In this study, the current environmental practices of management in the core Spanish auxiliary companies that do business with the automobile manufacturing industry (and thus form a large part of the automobile manufacturing industry's supply chain) are investigated. We show that while automobile manufacturing companies are under scrutiny to become more and more environmentally friendly, not only at their manufacturing stage but also at their products' useful and EOL stages, there appears to be no such burden on the auxiliary companies. Our conclusion is based on an elaborate survey conducted during the fall of 2004 of Spanish auxiliary companies with questions about the characteristics, environmental practices and reverse logistics related activities carried out by the companies.

  9. A bivariate model for analyzing recurrent multi-type automobile failures

    Science.gov (United States)

    Sunethra, A. A.; Sooriyarachchi, M. R.

    2017-09-01

    The failure mechanism in an automobile can be defined as a system of multi-type recurrent failures where failures can occur due to various multi-type failure modes and these failures are repetitive such that more than one failure can occur from each failure mode. In analysing such automobile failures, both the time and type of the failure serve as response variables. However, these two response variables are highly correlated with each other since the timing of failures has an association with the mode of the failure. When there are more than one correlated response variables, the fitting of a multivariate model is more preferable than separate univariate models. Therefore, a bivariate model of time and type of failure becomes appealing for such automobile failure data. When there are multiple failure observations pertaining to a single automobile, such data cannot be treated as independent data because failure instances of a single automobile are correlated with each other while failures among different automobiles can be treated as independent. Therefore, this study proposes a bivariate model consisting time and type of failure as responses adjusted for correlated data. The proposed model was formulated following the approaches of shared parameter models and random effects models for joining the responses and for representing the correlated data respectively. The proposed model is applied to a sample of automobile failures with three types of failure modes and up to five failure recurrences. The parametric distributions that were suitable for the two responses of time to failure and type of failure were Weibull distribution and multinomial distribution respectively. The proposed bivariate model was programmed in SAS Procedure Proc NLMIXED by user programming appropriate likelihood functions. The performance of the bivariate model was compared with separate univariate models fitted for the two responses and it was identified that better performance is secured by

  10. Automobile Tire Assessment: A Multi-Criteria Approach

    Directory of Open Access Journals (Sweden)

    Ateekh-Ur-Rehman

    2017-02-01

    Full Text Available In response to the present dynamic market, automobile manufacturing industries are constantly evaluating and improving their manufacturing strategies to stay competitive. It is also evident that they evaluate those strategies considering multiple criteria. In one such case, an automobile project manager has to ensure that the selected tire (among the available alternatives complies with the prospective automobile’s performance. This paper presents an approach for the assessment of alternative automobile tires taking into account multiple criteria, such as tire sustainability, tire road performance, environmental issues, tire purchase cost and tire road grip. The presented approach is quite helpful to any decision maker who is interested not only in ranking alternatives but also in establishing the superiority of an alternative over others. The approach also helps to specify the position of each alternative with respect to ideal solution. A case illustration is used to demonstrate an application of the approach.

  11. Illustrating Newton's Second Law with the Automobile Coast-Down Test.

    Science.gov (United States)

    Bryan, Ronald A.; And Others

    1988-01-01

    Describes a run test of automobiles for applying Newton's second law of motion and the concept of power. Explains some automobile thought-experiments and provides the method and data of an actual coast-down test. (YP)

  12. Renewing Marketing Strategy in Kenyan Automobile Industry

    OpenAIRE

    Kalliokuusi, Miriam

    2013-01-01

    This thesis studies how to renew existing marketing strategies for case company; in so doing, the thesis fulfills its main objective. Company X, a market leader in the Kenyan automobile sector and has various well-known brands under their corporate umbrella. The automobile industry in Kenya has faced some hardship with steady decline in sales in the last couple of years and Mercedes-Benz as a brand suffered under the circumstances. One major cause of the drop in sales is due to the influx of ...

  13. Technology development for meeting with automobiles negotiation

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Yong Il [Korea Institute of Machinery and Materials, Seoul (Korea)

    2000-06-01

    The direction of technology development for meeting with automobiles negotiation is to establish a development and supply policy of automobile with the minimum mileage. Furthermore the development policy of diesel car should be promoted with the same level of gasoline engine emission and a new concept of developing clean diesel engine is needed to achieve this goal. Therefore a smoke-filtering device, developed in Korea, should be promoted for supplying and post-process technology development such as SCR and DeNox catalyzer should be promoted.

  14. Proposal of laser-driven automobile

    Science.gov (United States)

    Yabe, Takashi; Oozono, Hirokazu; Taniguchi, Kazumoto; Ohkubo, Tomomasa; Miyazaki, Sho; Uchida, Shigeaki; Baasandash, Choijil

    2004-09-01

    We propose an automobile driven by piston motion, which is driven by water-laser coupling. The automobile can load a solar-pumped fiber laser or can be driven by ground-based lasers. The vehicle is much useful for the use in other planet in which usual combustion engine cannot be used. The piston is in a closed system and then the water will not be exhausted into vacuum. In the preliminary experiment, we succeeded to drive the cylindrical piston of 0.2g (6mm in diameter) on top of water placed inside the acrylic pipe of 8 mm in inner diameter and the laser is incident from the bottom and focused onto the upper part of water by the lens (f=8mm) attached to the bottom edge.

  15. Design and simulation of 120 capacity automobile parking control ...

    African Journals Online (AJOL)

    Design and simulation of 120 capacity automobile parking control system using up/down decade counters. ... leave(s) the parking lot through the exit gate the counter counts down, and the DC motor circuitry drives the entry gate open to allow access for the same number of automobiles that leave(s) the parking lot.

  16. Electric accessory drives in automobiles. Elektrische Hilfsantriebe in Kraftfahrzeugen

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Ten lectures were presented on the conference ''Electric accessory drives in automobiles'' subjects: - Survey on electric accessory drives in automobiles; cooperation of generator, battery and starter; technical solution of accessory drives, considerations on a system; comparison of various solutions for drives by viewing the example of a headlight vertical aim control; wiper motors and their control; blowers for heating, ventilation and air conditioning in automobiles; criteria for dimensioning of blower motors; drives in heating and air-conditioning applicances; permanent magnets for engine excitation; systematic quality assurance of electric accessory drives from car-development to serial production. Numerous illustrations and formulas are supplied which illustrate and explain the lectures. Each lecture is abstracted individually.

  17. Energy autonomous sensors in the automobile; Energieautarke Sensorik im Automobil

    Energy Technology Data Exchange (ETDEWEB)

    Kuehne, Ingo [Hochschule Heilbronn (Germany). Studiengang Energieoekologie; Schreiter, Matthias [Siemens AG, Muenchen (Germany); Li, Xiaoming [Daimler AG, Sindelfingen (Germany); Hehn, Thorsten [Hahn-Schickard-Gesellschaft fuer angewandte Forschung e.V., Freiburg (Germany). HSG-IMIT, Inst. fuer Mikro- und Informationstechnik; Thewes, Marcell; Scholl, Gerd [Helmut-Schmidt-Univ., Univ. der Bundeswehr, Hamburg (Germany); Wagner, Dieter [Continental Automotive GmbH, Regensburg (Germany); Manoli, Yiannos [Univ. Freiburg (Germany). IMTEK; Frey, Alexander [Hochschule Augsburg (Germany). Fakultaet Elektrotechnik

    2013-04-01

    A brief outline of energy autonomous sensors in the automobile is given. For this purpose the variety of sensors in today's automotive vehicles is reported. The rationale for the deployment of energy autonomous sensors is given. In addition the potential of using environmental energy and the possibilities of their energy conversion are presented. As part of the funded project ASYMOF, two pioneer applications - a tire pressure monitoring and an anti-theft alarm system - are studied and discussed.

  18. Pulmonary function in automobile repair workers

    Directory of Open Access Journals (Sweden)

    Chattopadhyay O

    2007-01-01

    Full Text Available Background : Automobile repair shop is a place where workers are exposed to harmful chemicals and toxic substances. Objective : To study the occurrence of obstructive and restrictive pulmonary impairment among automobile garage workers. Methods : A cross sectional study involving 151 automobile garage workers from 14 randomly selected garages of urban Kolkata. The study variables were Forced Expiratory Volume in 1 second (FEV 1 , Forced Vital Capacity (FVC, Peak Expiratory Flow Rate (PE FR, age, smoking habit, duration of work, type of work, and respiratory symptoms. The study was analysed using Regression equations, and Chi-square test. Results : All the workers were male. Obstructive impairment was seen in 25.83% of the workers whereas restrictive impairment was seen in 21.19% of the workers. Mixed obstructive and restrictive impairment was seen in 10.6% of the workers. The frequency of obstructive impairment was higher in older workers. In the age group of less than 20 years, 13.6% of the workers had obstructive impairment while 42.86% of workers above 40 years of age had obstructive impairment. Obstructive impairment was more frequently observed in battery repair workers (58.33% and spray painters (37.5% while 16.67% of the body repair workers and 30.19% of the engine mechanics had obstructive impairment. Obstructive impairment was more frequently observed in smokers (53.1 % as compared to ex-smokers (33.3% and non-smokers (6.4%. Obstructive impairment was more frequently observed in workers who had been working for a longer duration. Conclusion: Nearly 36.4% of the automobile garage workers had some form of pulmonary function impairment; obstructive and/or restrictive. The use of personal protective equipment, worker education, and discontinuation of the use of paints containing toxic pigments are recommended.

  19. Corrosion protection and finishing of automobiles

    International Nuclear Information System (INIS)

    Sheikh, S.T.

    2005-01-01

    finishing of automobiles is an important aspect. There have been considerable reductions of weight in automobiles by the use of composites components replacing heavy metallic components. Fenders previously based on metal have been replaced with plastic and painted with the same colour shade as of the metallic body, this has eps for proper adhesion of the paints on the plastic fender to avoid chipping off the paint form it. This paper discusses the necessary processes required for finishing of an automobile along with the corrosion protection measures. Automobiles contains a variety of engineering materials, engine main body fuel tanks connecting rods heat radiators and other mechanical parts are made from different types of engineering alloys having varying chemical compositions. Other parts like dashboard, front panel and other are made from composites. The main body made from cold roll ed steel having various contours 'c' it due to the different designs is the potential site for corrosion attack, The main body is exposed to the hostile environment through out its life period. An automobile is given a particular finish with a view to counter the hostile environments as they are not limited for plying in a limiting conditions and are taken to different weather conditions in one day thus facing severe stresses and strain. Thus it is essential that an automobile before rolling 'out of the assembly line should properly corrosion resistant and aesthetically pleasant also. Finishing for automobiles being very specialized, the main requirement being maximum durability with minimum numbers of coats baked, at the fastest possible schedule. High gloss and range of good eye catching colours being important to increase sales appeal. In the near past the car finishes were based on alkyd-amino resins baking materials and force drying lacquers, which have excellent appearance originally and maintain it on aging. The finishing system for the synthetic baking type may consist of

  20. Automobile characteristics historical data base

    Science.gov (United States)

    1977-08-01

    A collection of data concerning the physical, operating, and performance characteristics of automobiles for the model years 1955, 1960, 1965, 1968, and 1970 to 1974. Data is to be added to the data base already established by DOT/TSC, for the 1975 mo...

  1. Technological trends in automobiles.

    Science.gov (United States)

    Horton, E J; Compton, W D

    1984-08-10

    Current technological trends in the automotive industry reflect many diverse disciplines. Electronics and microprocessors, new engine transmission concepts, composite and ceramic materials, and computer-aided design and manufacture will combine to make possible the creation of advanced automobiles offering outstanding quality, fuel economy, and performance. A projected "average" vehicle of the 1990's is described to illustrate the application of these new concepts.

  2. The Antecedents of Automobile Brand Loyalty: Evidence from Malaysian

    OpenAIRE

    Mabkhot, Hashed Ahmed; Salleh, Salniza MD; Shaari, Hasnizam

    2016-01-01

    This study empirically examined the mediating effect of brand satisfaction on the relationship between brand image and brand loyalty among Malaysian customer toward local automobile brands. Four hypotheses were developed to test hypothesizing relationships among brand image, brand satisfaction on brand loyalty. Data collected from customers of automobile brands in north Malaysia peninsula from three states which were Kedah, Penang, and Perlis. This study applies partial least squares to a sam...

  3. Reducing automobile traffic: an urgent policy for health promotion

    Directory of Open Access Journals (Sweden)

    Tapia Granados José A.

    1998-01-01

    Full Text Available In recent decades traffic injuries have become a leading cause of death and disability the world over. In congested urban areas, the noise and emissions from vehicle engines cause discomfort and disease. More than one billion people are exposed daily to harmful levels of atmospheric contamination. Because internal combustion generates carbon dioxide (CO2 , the automobile is a principal contributor to the greenhouse effect, which has significantly raised the temperature of the atmosphere. Scientists anticipate that in coming decades the greenhouse effect will produce alterations in climate that are very likely to be harmful and possibly catastrophic. Meanwhile, burgeoning traffic and rural and urban highway infrastructures are already among the principal causes of environmental degradation. Urban development, because it is nearly always "planned" to accommodate automobiles rather than people, reduces the quality of life and tears the social fabric. In contrast to private automobiles, public transportation, bicycles, and walking produce little environmental contamination or injury-related morbidity and mortality. These modes of transport involve more physical activity, with its positive health effects, and avoid contributing to the greenhouse effect. The reduction of automobile traffic and substitution of alternative modes of transport are essential policies for health promotion. They should be incorporated in "healthy cities" programs and general economic policies.

  4. Intelligent solar-powered automobile-ventilation system

    International Nuclear Information System (INIS)

    Huang, K. David; Tzeng, S.-C.; Ma Weiping; Wu Mingfung

    2005-01-01

    This study adopts airflow management technology to improve the local temperature distributions in an automobile to counteract the greenhouse effect. The automobile's temperature can be reduced to almost the outside temperature before the driver or passenger gets into the vehicle. When the engine is idling, the greenhouse-control system can be activated to remove the hot air from the car. An appropriate negative pressure is maintained to prevent stuffiness and save energy. The greenhouse-control system requires electrical power when the engine is idle, and a battery cannot supply sufficient power. An auxiliary solar-power supply can save energy and reduce the greenhouse effect of sunlight, while creating a comfortable traveling environment. It ensures that the engine is not overburdened and increases its service life, conserving energy, protecting the environment and improving comfort

  5. Empirical Analysis of Green Supply Chain Management Practices in Indian Automobile Industry

    Science.gov (United States)

    Luthra, S.; Garg, D.; Haleem, A.

    2014-04-01

    Environmental sustainability and green environmental issues have an increasing popularity among researchers and supply chain practitioners. An attempt has been made to identify and empirically analyze green supply chain management (GSCM) practices in Indian automobile industry. Six main GSCM practices (having 37 sub practices) and four expected performance outcomes (having 16 performances) have been identified by implementing GSCM practices from literature review. Questionnaire based survey has been made to validate these practices and performance outcomes. 123 complete questionnaires were collected from Indian automobile organizations and used for empirical analysis of GSCM practices in Indian automobile industry. Descriptive statistics have been used to know current implementation status of GSCM practices in Indian automobile industry and multiple regression analysis has been carried out to know the impact on expected organizational performance outcomes by current GSCM practices adopted by Indian automobile industry. The results of study suggested that environmental, economic, social and operational performances improve with the implementation of GSCM practices. This paper may play an important role to understand various GSCM implementation issues and help practicing managers to improve their performances in the supply chain.

  6. Environmental change and hedonic cost functions for automobiles.

    Science.gov (United States)

    Berry, S; Kortum, S; Pakes, A

    1996-11-12

    This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate "hedonic cost functions" that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices.

  7. Environmental change and hedonic cost functions for automobiles

    Science.gov (United States)

    Berry, Steven; Kortum, Samuel; Pakes, Ariel

    1996-01-01

    This paper focuses on how changes in the economic and regulatory environment have affected production costs and product characteristics in the automobile industry. We estimate “hedonic cost functions” that relate product-level costs to their characteristics. Then we examine how this cost surface has changed over time and how these changes relate to changes in gas prices and in emission standard regulations. We also briefly consider the related questions of how changes in automobile characteristics, and in the rate of patenting, are related to regulations and gas prices. PMID:8917486

  8. Mind the Gap: The Vicious Circle of Measuring Automobile Fuel Use

    DEFF Research Database (Denmark)

    Figueroa, Maria; author), L. Schipper (main; Price, L.

    1993-01-01

    We review the circularity between estimates of automobile use, fuel consumption and fuel intensity. We find that major gaps exist between estimates of road gasoline, the quantity most often used to represent automobile fuel use in economic studies of transport fuel use, and the actual sales data...

  9. Production of spheroidal graphite cast iron (S. G. Iron) for an automobile brake drum

    International Nuclear Information System (INIS)

    Butt, M.T.Z.; Aziz, S.

    2005-01-01

    The role of automobile industry for any country has a great importance. Break drum is one of the essential parts of automobile car and its local casting is required in order to achieve the target for automobile industry because it has special significance. Break drum being the important constituent of the system of an automobile requires a great degree of accuracy and reliability. S. G. Iron is preferred because of its mechanical properties i.e., higher strength modulus, impact resistance and ductility along with excellent machinability and manufacturing ease. (author)

  10. Essays on Competition and Innovations in the Automobile Markets

    OpenAIRE

    Leheyda, Nina

    2007-01-01

    The central focus of my dissertation has been on the investigation of developments towards more competitive and innovative firm behaviour in the global automobile markets. The automobile companies meet each other in many product and geographical markets worldwide. A large proportion of their production is outside of their "home" country. In my work I focus on international most important car markets, namely US, European and German as the most important single European car market and a very in...

  11. Atmospheric pollution coming from automobiles and public health

    International Nuclear Information System (INIS)

    Chiron, M.; Quenel, Ph.; Zmirou, D.

    1997-01-01

    The air pollution coming from automobile is responsible of different diseases in respiratory or cardiovascular system. epidemiological studies in professional or general media give information in term of public health. If the role of air pollution from automobile at short terms is well established, for effects at long term (such cancers or chronic diseases of respiratory system) the measurement or estimation of the exposure is not sufficient for the moment and makes the epidemiology unable to quantify effects. In spite of these lacks, it is important to reduce the risk for the most fragile people. (N.C.)

  12. Substance flow analysis and environmental releases of PBDEs in life cycle of automobiles.

    Science.gov (United States)

    Choi, Jonghyun; Jang, Yong-Chul; Kim, Jong-Guk

    2017-01-01

    Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, have been widely used in many applications in industry such as automobiles, textiles, and electronics. This study focused on a quantitative substance flow analysis (SFA) of PBDEs in automobiles in order to identify their flow by life cycle and treatment pathways of PBDEs-containing materials in end-of-life vehicles (ELVs) in Korea. In addition, this study has estimated environmental releases of PBDEs in automobiles by life cycle in Korea. During this study, PBDEs were analyzed for the samples collected from several ELVs treatment facilities using X-ray fluorescence and gas chromatography/mass spectrometry (GC/MS) methods. The system boundary for SFA of PBDEs ranged from manufacturing/trade to disposal stage of automobiles by life cycle. Based on the result of the SFA, it was found that the amount of PBDEs in automobiles were the highest in use stage (7748ton/year), followed by production stage (1743ton/year) in 2014. In disposal stage, automobile shredded residues (ASR) and seat fabrics were the main components with relatively high levels of PBDEs in ELVs. The major treatment methods of such components included incineration (84%), energy recovery (9%), and landfilling (6%). This research indicates that PBDEs were emitted the highest amount from interior components during the use stage of automobiles, followed by recycling processes such as dismantling and shredding. This study suggests that PBDEs in ASR and seat fabrics should be properly managed to prevent the widespread dispersion in the environment. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Integrated study for automobile wastes management and ...

    African Journals Online (AJOL)

    Administrator

    Key words: Soil contamination, storm water treatment, emission testing, EPR, heavy metals. INTRODUCTION .... fractionation in soil profiles at automobile mechanic waste ...... The phyto-remediation technique modifies plants to take.

  14. STRATEGIC ENTREPRENEURSHIP: A CASE IN THE BRAZILIAN AUTOMOBILE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Afonso Carneiro Lima

    2010-07-01

    Full Text Available This work addresses an entrepreneurial phenomenon of strategic administration within the automobile industry: the creation of the automaker Troller Veículos Especiais (TVE. The case study at hand is justified by the positioning of this company around two market niches and its relative success in an industry characterized by few and powerful players. Our aim was to analyze the entrepreneurial and strategic process of discovering opportunity, the analysis used for internal and external factors, and the adoption of its strategic positioning in exploring two automobile market niches: in the B2B market, vehicles adapted to specific operational functions; and in the B2C, off-road vehicles with a strong appeal to consumers’ life styles. This case study allowed us to visualize the challenging path of a genuinely Brazilian small company in a sector dominated by large multinational groups, besides demonstrating decision-related dilemmas and aspects related to managerial creativity.Key-words: Automobile industry. Case study. Strategic entrepreneurship. Discovery theory. Strategic positioning.

  15. Chery Automobile: Chinese Firms catching up

    NARCIS (Netherlands)

    Y. Zhang (Ying); S.Y. Yang (Sheng Yun)

    2015-01-01

    textabstractChery Automobile is a top Chinese car exporter. Due to the global financial crisis, intense competition, and fast technological change, Chery has seen decreasing sales domestically and diminishing opportunities abroad. The carmaker needs to figure out the next stage of strategic

  16. Hinderniserkennung und -verfolgung mit einer PMD-kamera im automobil

    Science.gov (United States)

    Schamm, Thomas; Vacek, Stefan; Natroshvilli, Koba; Marius Zöllner, J.; Dillmann, Rüdiger

    Die Detektion von Hindernissen vor dem Automobil ist eine Hauptanforderung an moderne Fahrerassistenzsysteme (FAS). In dieser Arbeit wird ein System vorgestellt, das mit Hilfe einer PMDKamera (Photomischdetektor) Hindernisse auf der Fahrspur erkennt und deren relevante Parameter bestimmt. Durch die PMD-Kamera werden zunächst 3D-Tiefenbilder der Fahrzeugumwelt generiert. Nach einem initialen Filterprozess werden im Tiefenbild mit Hilfe eines Bereichswachstumsverfahrens Hindernisse gesucht. Zur Stabilisierung des Verfahrens und zur Parameterberechnung wird ein Kaiman Filter eingesetzt. Das Ergebnis ist eine Liste aller Hindernisse im Fahrbereich des Automobils.

  17. Use of powered electric vehicles in automobile fleets. Help elements for decision; Utilisation de vehicules electriques dans les flottes automobiles. Elements d`aide a la decision

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    One of the primary causes of degradation in the quality of urban life is automobile transportation. The introduction of electric vehicles within automobile fleets can help mitigate some of the associated impacts. This guide has assembled a set of technical tools vital to all fleet managers, whether they be with public-sector agencies or companies, who are involved in vehicle-purchasing decisions. It deals with the specific issues related to the use, maintenance and acquisition of electric vehicles. Besides those elements intended to convince both decision-makers and users alike, the automobile fleet manager will find herein, as a conclusion, some examples of comparative economic assessments. These serve to highlight the opportunities available for using electric vehicles in a wide variety of situations. (authors) 18 refs.

  18. Design of a TFT-LCD Based Digital Automobile Instrument

    Directory of Open Access Journals (Sweden)

    Yunsong Xu

    2014-01-01

    instrument and gives an introduction to the sampling circuits and interfaces related to these signals. Following this is the functional categorizing of the circuit modules, such as video buffer circuit, CAN bus interface circuit, and TFT-LCD drive circuit. Additionally, the external EEPROM stores information of the vehicle for history data query, and the external FLASH enables the display of high quality figures. On the whole, the accomplished automobile instrument meets the requirements of automobile instrument markets with its characters of low cost, favorable compatibility, friendly interfaces, and easy upgrading.

  19. Application of Wireless Sensor Networks to Automobiles

    Science.gov (United States)

    Tavares, Jorge; Velez, Fernando J.; Ferro, João M.

    2008-01-01

    Some applications of Wireless Sensor Networks (WSNs) to the automobile are identified, and the use of Crossbow MICAz motes operating at 2.4 GHz is considered together with TinyOS support. These WSNs are conceived in order to measure, process and supply to the user diverse types of information during an automobile journey. Examples are acceleration and fuel consumption, identification of incorrect tire pressure, verification of illumination, and evaluation of the vital signals of the driver. A brief survey on WSNs concepts is presented, as well as the way the wireless sensor network itself was developed. Calibration curves were produced which allowed for obtaining luminous intensity and temperature values in the appropriate units. Aspects of the definition of the architecture and the choice/implementation of the protocols are identified. Security aspects are also addressed.

  20. Divorce your car: ending the love affair with the automobile

    Energy Technology Data Exchange (ETDEWEB)

    Alvord, K.

    2000-07-01

    This book is a guide for people wishing to liberate themselves from their addiction to cars and the automobile culture. It is a repository of examples and actions that individuals and communities can take to reduce dependence on the automobile. The range of possibilities run from using cars less to not owning one at all. The book provides a humorous yet clear-headed approach to a greener world and maps out the road to how people can live happily ever after by breaking free of 'auto-cracy', without insisting on people in car-dependent countries quit their automotive addiction instantly. Nevertheless, it clearly articulates the connection between automobiles, their arteries (i.e. highways) and effluents (i.e. greenhouse gases and particulate emissions), and the increasing number and severity of natural disasters between the urban renewal and freeway construction that, in the author's view, helped ignite the riots in Watts, Newark and Detroit. The disastrous societal and geophysical effects of the automobile are demonstrated in great abundance, and the mountain of evidence of the systematic abuse of the planet that the book provides is a stunning refutation of the notion that technology is neutral. The automobile is accused of being not only the linchpin of Western and primarily American industrialism and resource extraction, it is also accused of being the chief suspect in a century-long theft of time, conviviality and beauty. How to bring about a change in people's love affair with their cars is difficult to comprehend but this author has a multitude of useful suggestions which seem to suggest that it is possible. There is a list of 104 'selected references' and an extensive list of 'other resources'.

  1. Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

    Energy Technology Data Exchange (ETDEWEB)

    Lin Gan [Center for International Climate and Environmental Research, Oslo (Norway)

    2003-05-01

    This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analysed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis. (author)

  2. Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

    Energy Technology Data Exchange (ETDEWEB)

    Gan Lin E-mail: lin.gan@cicero.uio.no

    2003-05-01

    This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis.

  3. Globalization of the automobile industry in China: dynamics and barriers in greening of the road transportation

    International Nuclear Information System (INIS)

    Gan Lin

    2003-01-01

    This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of automobiles in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policymaking and transportation management. Efforts need to be made to use more economic incentives for emissions reduction, and to promote technological change for cleaner vehicle development. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems, stronger emissions control, and technology innovation on environmental friendly automobile technologies would be relevant to China's drive toward sustainable transportation development. Social inequities resulted from automobile use is also stressed in the analysis

  4. The inspection of components by X ray in real time in automobile industry

    International Nuclear Information System (INIS)

    Demandt, K.

    1987-01-01

    Besides a brief introduction to the state of the art of automobile components inspection by radiography in real time, some examples are discussed. New developments and a possible application for automobile components inspection by x-radiation are discussed. (E.G.) [pt

  5. The effect of airline deregulation on automobile fatalities.

    Science.gov (United States)

    Bylow, L F; Savage, I

    1991-10-01

    This paper attempts to quantify the effects of airline deregulation in the United States on intercity automobile travel and consequently on the number of highway fatalities. A demand model is constructed for auto travel, which includes variables representing the price and availability of air service. A reduced form model of the airline market is then estimated. Finding that deregulation has decreased airfares and increased flights, it is estimated that auto travel has been reduced by 2.2% per year on average. Given assumptions on the characteristics of drivers switching modes and the types of roads they drove on, the number of automobile fatalities averted since 1978 is estimated to be in the range 200-300 per year.

  6. Automotive History and Development of the Automobile; Automotive Mechanics I: 9043.01.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    The automotive history and development of the automobile course is designed to familiarize the beginning student with basic concepts common to the automobile history and general information that is required for successful advancement in the automotive mechanics field. A course outline is provided and seven pages of post-tests are included in the…

  7. Development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels

    Directory of Open Access Journals (Sweden)

    A. Vasilis Vasiliauskas

    2010-12-01

    Full Text Available .The days when a buyer was forced to choose from what is being offered have passed. These days, buyers demand a product that would answer their exclusive expectations at a time of their preference and at an acceptable price. Therefore, manufacturers aiming to survive the competition battle have to rethink their operation strategies. Special importance is attached to the process of development and reconstruction of supply chains, and the process which may feature particularities, depending on the branch of industry. Automobile manufacturing is the biggest the fastest industry developing across the globe. New automobiles are listed as luxury commodities and are, therefore, subjected to very strict requirements with regard to various logistic operations and technologies, which are vital for ensuring efficient automobile delivery to the final users. Due to the growing demand for brand-new automobiles and the distance to the user, automobile manufacturers are constantly searching for solutions to the development and support of an efficient distribution network. Strategy shaping of distribution network requires evaluation of a number of criteria, which influence the distribution system. The article analyzes the development of automobile distribution networks on the basis of multi-criteria evaluation of distribution channels.

  8. Analysis of CO2, CO and HC emission reduction in automobiles

    Science.gov (United States)

    Balan, K. N.; Valarmathi, T. N.; Reddy, Mannem Soma Harish; Aravinda Reddy, Gireddy; Sai Srinivas, Jammalamadaka K. M. K.; Vasan

    2017-05-01

    In the present scenario, the emission from automobiles is becoming a serious problem to the environment. Automobiles, thermal power stations and Industries majorly constitute to the emission of CO2, CO and HC. Though the CO2 available in the atmosphere will be captured by oceans, grasslands; they are not enough to control CO2 present in the atmosphere completely. Also advances in engine and vehicle technology continuously to reduce the emission from engine exhaust are not sufficient to reduce the HC and CO emission. This work concentrates on design, fabrication and analysis to reduce CO2, CO and HC emission from exhaust of automobiles by using molecular sieve 5A of 1.5mm. In this paper, the details of the fabrication, results and discussion about the process are discussed.

  9. Environmental implications of alternative-fueled automobiles: Air quality and greenhouse gas tradeoffs

    International Nuclear Information System (INIS)

    MaClean, H.L.; Lave, L.B.

    2000-01-01

    The authors analyze alternative fuel-powerstrain options for internal combustion engine automobiles. Fuel/engine efficiency, energy use, pollutant discharges, and greenhouse gas emissions are estimated for spark and compression ignited, direct injected (DI), and indirect injected (II) engines fueled by conventional and reformulated gasoline, reformulated diesel, compressed natural gas (CNG), and alcohols. Since comparisons of fuels and technologies in dissimilar vehicles are misleading, the authors hold emissions level, range, vehicle size class, and style constant. At present, CNG vehicles have the best exhaust emissions performance while DI diesels have the worst. Compared to a conventional gasoline fueled II automobile, greenhouse gases could be reduced by 40% by a DI CNG automobile and by 25% by a DI diesel. Gasoline- and diesel-fueled automobiles are able to attain long ranges with little weight or fuel economy penalty. CNG vehicles have the highest penalty for increasing range, due to their heavy fuel storage systems, but are the most attractive for a 160-km range. DI engines, particularly diesels, may not be able to meet strict emissions standards, at least not without lowering efficiency

  10. Interior Noise Prediction of the Automobile Based on Hybrid FE-SEA Method

    Directory of Open Access Journals (Sweden)

    S. M. Chen

    2011-01-01

    created using hybrid FE-SEA method. The modal density was calculated using analytical method and finite element method; the damping loss factors of the structural and acoustic cavity subsystems were also calculated with analytical method; the coupling loss factors between structure and structure, structure and acoustic cavity were both calculated. Four different kinds of excitations including road excitations, engine mount excitations, sound radiation excitations of the engine, and wind excitations are exerted on the body of automobile when the automobile is running on the road. All the excitations were calculated using virtual prototype technology, computational fluid dynamics (CFD, and experiments realized in the design and development stage. The interior noise of the automobile was predicted and verified at speed of 120 km/h. The predicted and tested overall SPLs of the interior noise were 73.79 and 74.44 dB(A respectively. The comparison results also show that the prediction precision is satisfied, and the effectiveness and reliability of the hybrid FE-SEA model of the automobile is verified.

  11. Topology Explains Why Automobile Sunshades Fold Oddly

    Science.gov (United States)

    Feist, Curtis; Naimi, Ramin

    2009-01-01

    Automobile sunshades always fold into an "odd" number of loops. The explanation why involves elementary topology (braid theory and linking number, both explained in detail here with definitions and examples), and an elementary fact from algebra about symmetric group.

  12. Design of Automobile Driveshaft using Carbon/Epoxy and Kevlar/Epoxy Composites

    OpenAIRE

    R. Srinivasa Moorthy

    2013-01-01

    Use of advanced composites has resulted in remarkable achievements in many fields including aviation, marine and automobile engineering, medicine, prosthetics and sports, in terms of improved fatigue and corrosion resistances, high specific strength and specific modulus and reduction in energy requirements owing to reduction in weight. The aim of this work is to replace the conventional steel driveshaft of automobiles with an appropriate composite driveshaft. The conventional driveshafts ar...

  13. Evaluation of malodor for automobile air conditioner evaporator by using laboratory-scale test cooling bench.

    Science.gov (United States)

    Kim, Kyung Hwan; Kim, Sun Hwa; Jung, Young Rim; Kim, Man Goo

    2008-09-12

    As one of the measures to improve the environment in an automobile, malodor caused by the automobile air-conditioning system evaporator was evaluated and analyzed using laboratory-scale test cooling bench. The odor was simulated with an evaporator test cooling bench equipped with an airflow controller, air temperature and relative humidity controller. To simulate the same odor characteristics that occur from automobiles, one previously used automobile air conditioner evaporator associated with unpleasant odors was selected. The odor was evaluated by trained panels and collected with aluminum polyester bags. Collected samples were analyzed by thermal desorption into a cryotrap and subsequent gas chromatographic separation, followed by simultaneous olfactometry, flame ionization detector and identified by atomic emission detection and mass spectrometry. Compounds such as alcohols, aldehydes, and organic acids were identified as responsible odor-active compounds. Gas chromatography/flame ionization detection/olfactometry combined sensory method with instrumental analysis was very effective as an odor evaluation method in an automobile air-conditioning system evaporator.

  14. Data-Driven Neural Network Model for Robust Reconstruction of Automobile Casting

    Science.gov (United States)

    Lin, Jinhua; Wang, Yanjie; Li, Xin; Wang, Lu

    2017-09-01

    In computer vision system, it is a challenging task to robustly reconstruct complex 3D geometries of automobile castings. However, 3D scanning data is usually interfered by noises, the scanning resolution is low, these effects normally lead to incomplete matching and drift phenomenon. In order to solve these problems, a data-driven local geometric learning model is proposed to achieve robust reconstruction of automobile casting. In order to relieve the interference of sensor noise and to be compatible with incomplete scanning data, a 3D convolution neural network is established to match the local geometric features of automobile casting. The proposed neural network combines the geometric feature representation with the correlation metric function to robustly match the local correspondence. We use the truncated distance field(TDF) around the key point to represent the 3D surface of casting geometry, so that the model can be directly embedded into the 3D space to learn the geometric feature representation; Finally, the training labels is automatically generated for depth learning based on the existing RGB-D reconstruction algorithm, which accesses to the same global key matching descriptor. The experimental results show that the matching accuracy of our network is 92.2% for automobile castings, the closed loop rate is about 74.0% when the matching tolerance threshold τ is 0.2. The matching descriptors performed well and retained 81.6% matching accuracy at 95% closed loop. For the sparse geometric castings with initial matching failure, the 3D matching object can be reconstructed robustly by training the key descriptors. Our method performs 3D reconstruction robustly for complex automobile castings.

  15. Application of Chemometric Techniques to Colorimetric Data in Classifying Automobile Paint

    International Nuclear Information System (INIS)

    Nur Awatif Rosli; Rozita Osman; Norashikin Saim; Mohd Zuli Jaafar

    2015-01-01

    The analysis of paint chips is of great interest to forensic investigators, particularly in the examination of hit-and run cases. This study proposes a direct and rapid method in classifying automobile paint samples based on colorimetric data sets; absorption value, reflectance value, luminosity value (L), degree of redness (a) and degree of yellowness (b) obtained from video spectral comparator (VSC) technique. A total of 42 automobile paint samples from 7 manufacturers were analysed. The colorimetric datasets obtained from VSC analysis were subjected to chemometric technique namely cluster analysis (CA) and principal component analysis (PCA). Based on CA, 5 clusters were generated; Cluster 1 consisted of silver color, cluster 2 consisted of white color, cluster 3 consisted of blue and black colors, cluster 4 consisted of red color and cluster 5 consisted of light blue color. PCA resulted in two latent factors explaining 95.58 % of the total variance, enabled to group the 42 automobile paints into five groups. Chemometric application on colorimetric datasets provide meaningful classification of automobile paints based on their tone colour (L, a, b) and light intensity These approaches have the potential to ease the interpretation of complex spectral data involving a large number of comparisons. (author)

  16. A basic study on universal design of auditory signals in automobiles.

    Science.gov (United States)

    Yamauchi, Katsuya; Choi, Jong-dae; Maiguma, Ryo; Takada, Masayuki; Iwamiya, Shin-ichiro

    2004-11-01

    In this paper, the impression of various kinds of auditory signals currently used in automobiles and a comprehensive evaluation were measured by a semantic differential method. The desirable acoustic characteristic was examined for each type of auditory signal. Sharp sounds with dominant high-frequency components were not suitable for auditory signals in automobiles. This trend is expedient for the aged whose auditory sensitivity in the high frequency region is lower. When intermittent sounds were used, a longer OFF time was suitable. Generally, "dull (not sharp)" and "calm" sounds were appropriate for auditory signals. Furthermore, the comparison between the frequency spectrum of interior noise in automobiles and that of suitable sounds for various auditory signals indicates that the suitable sounds are not easily masked. The suitable auditory signals for various purposes is a good solution from the viewpoint of universal design.

  17. Hydrogen: implications for the future automobile

    International Nuclear Information System (INIS)

    Frise, P. R.; Woodward, W.

    2004-01-01

    'Full text:' The presentation will focus upon the challenges within the automotive manufacturing industry related to the hydrogen fuelled automobile of the future. Challenges and opportunities include issues of power train design and packaging as well as on-road performance capabilities, fuel system packaging and materials for body structures. Due to the size and complexity of the automotive sector, technology changes tend to be evolutionary rather than revolutionary, but changes are being made to today's cars in preparation for the evolution toward the future hydrogen automobile. Real world applications of new technologies will be described that are assisting automakers to prepare for the hydrogen future today. The work will be described in the context of AUTO21, a national Network of Centres of Excellence (NCE), is helping to position Canada as a leader in automotive research and development. More than 250 researchers in 34 Canadian universities and over 110 industry and government partners contribute to AUTO21 through applied research projects in six themes of study ranging from health and societal issues to pure engineering applications. (author)

  18. New perspectives for advanced automobile diesel engines

    Science.gov (United States)

    Tozzi, L.; Sekar, R.; Kamo, R.; Wood, J. C.

    1983-01-01

    Computer simulation results are presented for advanced automobile diesel engine performance. Four critical factors for performance enhancement were identified: (1) part load preheating and exhaust gas energy recovery, (2) fast heat release combustion process, (3) reduction in friction, and (4) air handling system efficiency. Four different technology levels were considered in the analysis. Simulation results are compared in terms of brake specific fuel consumption and vehicle fuel economy in km/liter (miles per gallon). Major critical performance sensitivity areas are: (1) combustion process, (2) expander and compressor efficiency, and (3) part load preheating and compound system. When compared to the state of the art direct injection, cooled, automobile diesel engine, the advanced adiabatic compound engine concept showed the unique potential of doubling the fuel economy. Other important performance criteria such as acceleration, emissions, reliability, durability and multifuel capability are comparable to or better than current passenger car diesel engines.

  19. The System Dynamics of U.S. Automobile Fuel Economy

    Directory of Open Access Journals (Sweden)

    Todd K. BenDor

    2012-05-01

    Full Text Available This paper analyzes the dynamics of U.S. automobile gasoline consumption since 1975. Using background literature on the history of domestic fuel economy and energy policy, I establish a conceptual model that explains historical trends in adoption of increased fuel economy. I then create a system dynamics simulation model to understand the relationship between increased fuel economy standards and potential changes to gas tax policies. The model suggests that when increases in mandated fuel economy are not conducted in an environment with rising fuel costs, fuel economy improvements may be directly counteracted by shifting tastes of consumers towards larger automobiles with lower fuel economy.

  20. The automobile after tomorrow

    Energy Technology Data Exchange (ETDEWEB)

    Guzzella, L [Swiss Federal Inst. of Technology (ETH), Zurich (Switzerland)

    1996-11-01

    This talk discusses the technical options available for automobiles within the next 5 to 10 years. With the objective to reduce consumption and pollution, several alternative approaches are presented and analyzed using simplified but realistic calculations. Main emphasis is laid on CO{sub 2} emission of the complete energy transformation path from the primary energy carrier to the energy dissipated in test cycles. It is shown that no single optimal solution exist but that a trade-off between consumption, pollution and cost must be made for each specific situation. (author) 17 figs., 2 tabs.

  1. Research on the Bionics Design of Automobile Styling Based on the Form Gene

    Science.gov (United States)

    Aili, Zhao; Long, Jiang

    2017-09-01

    From the heritage of form gene point of view, this thesis has analyzed the gene make-up, cultural inheritance and aesthetic features in the evolution and development of forms of brand automobiles and proposed the bionic design concept and methods in the automobile styling design. And this innovative method must be based on the form gene, and the consistency and combination of form element must be maintained during the design. Taking the design of Maserati as an example, the thesis will show you the design method and philosophy in the aspects of form gene expression and bionic design innovation for the future automobile styling.

  2. Spatial distribution and landuse planning of informal automobile ...

    African Journals Online (AJOL)

    Spatial distribution and landuse planning of informal automobile workshops in Osogbo, ... data pertaining to the activities and other related issues of their workshops. ... The study therefore, recommends the establishment of mechanic complex, ...

  3. Prelaunch Forecasting of New Automobiles

    OpenAIRE

    Glen L. Urban; John R. Hauser; John H. Roberts

    1990-01-01

    This paper develops and applies a prelaunch model and measurement system to the marketing planning of a new automobile. The analysis addresses active search by consumers, dealer visits, word-of-mouth communication, magazine reviews, and production constraints---issues that are important in understanding consumer response to durable goods. We address these issues with a detailed consumer flow model which monitors and projects key consumer transitions in response to marketing actions. A test-vs...

  4. A new method for controlling refrigerant flow in automobile air conditioning

    Energy Technology Data Exchange (ETDEWEB)

    Xuquan Li; Jiangping Chen; Zhijiu Chen [Shanghai Jiao Tong University (China). Institute of Refrigeration and Cryogenics Engineering; Weihua Liu; Wei Hu; Xiaobing Liu [Shanghai Delphi Automotive Air Conditiong Systems Co. Ltd., Changhai (China)

    2004-05-01

    This paper describes the improvement of the refrigerant flow control method by using an electronic expansion valve (EEV) which is driven by a stepper motor in automobile air conditioning system. An EEV can make a quick response to the abrupt change in the refrigerant flow rate during the change in automobile speed and the thermostatic on/off operation. The flow rate characteristic of the EEV for automobile air conditioning was presented. A microcontroller is used to receive the input signal and generate the output signal to control the opening of the EEV. The fuzzy self-tuning proportional-integral-derivative (PID) control method is employed. Experimental results show that the new control method can feed adequate refrigerant flow into the evaporator in various operations. The evaporator discharge air temperature has dropped by approximately 3{sup o}C as compared with that of the conventional PID control system. (author)

  5. A Tractor or an Automobile? A 1920s Farm Family Faces a Decision.

    Science.gov (United States)

    Kunze, Joel P.

    1991-01-01

    Outlines a lesson plan in which students role play a 1920s farm family deciding whether to buy an automobile or a tractor. Other students act as automobile and tractor sales groups. Explains how the lesson illuminates relationships between technological advance and social history. Includes handouts identifying benefits of purchasing cars or…

  6. Legislative Committee Simulation: Regulation in the Automobile Industry.

    Science.gov (United States)

    Hoffman, Alan J.; And Others

    1983-01-01

    Examined are ways to overcome obstacles which often prevent creative teaching of legislative decision-making processes to high school students. A simulation dealing with regulation in the automobile industry is used for illustrative purposes. (RM)

  7. Designing carbon taxation schemes for automobiles: A simulation exercise for Germany

    OpenAIRE

    Adamou, Adamos; Clerides, Sofronis; Zachariadis, Theodoros

    2011-01-01

    Vehicle taxation based on CO2 emissions is increasingly being adopted worldwide in order to shift consumer purchases to low-carbon cars, yet little is known about the effectiveness and overall economic impact of these schemes. We focus on feebate schemes, which impose a fee on high-carbon vehicles and give a rebate to purchasers of low-carbon automobiles. We estimate a discrete choice model of demand for automobiles in Germany and simulate the impact of alternative feebate schemes on emission...

  8. Hierarchical functional model for automobile development; Jidosha kaihatsu no tame no kaisogata kino model

    Energy Technology Data Exchange (ETDEWEB)

    Sumida, S [U-shin Ltd., Tokyo (Japan); Nagamatsu, M; Maruyama, K [Hokkaido Institute of Technology, Sapporo (Japan); Hiramatsu, S [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    A new approach on modeling is put forward in order to compose the virtual prototype which is indispensable for fully computer integrated concurrent development of automobile product. A basic concept of the hierarchical functional model is proposed as the concrete form of this new modeling technology. This model is used mainly for explaining and simulating functions and efficiencies of both the parts and the total product of automobile. All engineers who engage themselves in design and development of automobile can collaborate with one another using this model. Some application examples are shown, and usefulness of this model is demonstrated. 5 refs., 5 figs.

  9. High energy X-ray CT system using a linear accelerator for automobile parts inspection

    International Nuclear Information System (INIS)

    Kanamori, T.; Sukita, T.

    1995-01-01

    A high energy X-ray CT system (maximum photon energy: 0.95 MeV) has been developed for industrial use. This system employs a linear accelerator as an X-ray source. It is able to image the cross section of automobile parts and can be applied to a solidification analysis study of the cylinder head in an automobile. This paper describes the features of the system and application results which can be related to solidification analysis of the cylinder head when fabricated from an aluminum casting. Some cross-sectional images are also presented as evidence for nondestructive inspection of automobile parts. (orig.)

  10. Automobile industry and globalization in Asian market; Asia ni okeru jidosha sangyo to globalization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    Asian countries are now attracting attention of automobile manufacturers of the world for their capabilities of buying, producing, and assembling of automobiles, and producing and supplying of parts, which means that the Asian market is now exposed to globalization. As for the automobile and part manufacturers of Japan, in the presence of economic depression lingering in Asia affecting motorization and rapid changes in the circumstances Japan`s automobile industry finds itself under, are pressed to work out new strategies as a member of the Asian community. A panel discussion of the same name as the subject held in 1997 won favor as a fine initiative to suitably cope with the difficult situation. Useful suggestions and proposals were made concerning the panel discussion, calling the event a new type of round-table talks well responding to the rapid changes in the world economy since 1997, by learned and experienced people, the government offices concerned, staffers of manufacturers in charge of overseas marketing, and international information analysts. They related to the current state and tasks of automobile manufacturing in Asia, trends of regulations and standardization, rolls of technical assistance and the Society of Automotive Engineers of Japan, Ltd., expressed from a wide angle covering various problems relative to environmental protection, safety, etc. (NEDO)

  11. Automobile technology of the future

    International Nuclear Information System (INIS)

    Seiffert, U.; Walzer, P.

    1990-01-01

    Looking ahead to the year 2000, this fascinating publication takes an in-depth look at new technology which will impact the passenger car of tomorrow. New developments in the areas of performance, reliability, comfort, fuel economy, safety, and environmental compatibility are examined. In this book the authors offer analysis on subjects such as the impact of legislation, the acceptance of ABS, and features of the future dashboard. Offering insight to readers with both technical and general interest in automobiles

  12. Globalization of the automobile industry in China. Dynamics and barriers in the greening of road transportation

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Lin

    2001-08-01

    This article describes the state of the automobile industry and urban road transportation management in China. It reviews how the automobile industry is evolving to respond to challenges in economic development, environmental regulations, and technological change. The dynamics and barriers resulting from technological change of the automobile in response to reduction of exhaust emissions and energy-efficiency improvement are analyzed. It is argued that consideration of externality costs should be integrated in automobile industrial policy making and transport management. This paper questions the current government policy of encouraging private car ownership, and suggests that improvement in public transportation systems and stronger emissions control would be relevant to China's drive toward sustainable transportation development. (author)

  13. UNICEF and automobile CO2 negotiation

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Seok Hun [Korea Energy Management Corporation, Yongin (Korea)

    2000-06-01

    The EU automobile negotiation was very suggestive since it was the first international trade negotiation related with UNFCCC. It generated considerable reactions in association with {sup v}oluntary negotiation{sup i}n semiconductor sector. Most of all, such a new car negotiation shows well that it is hard to free from global environmental responsibilities even for a company in a developing country in UNFCCC.

  14. CHINESE AUTOMOBILE ENTERPRISE STRATEGY ANALYSIS

    OpenAIRE

    Phd. Candidate Mrs. Chai Feng xia

    2015-01-01

    China's auto industry also had a golden decade of explosive growth. In 2009, China's auto market has exceeded the United States, the wo rld's largest car market, and in 2013, China's auto production both breaks t hrough twenty million. However, through the presentation of China's auto m arket booming, we should be acutely aware that the status of China's automobile industry in the global automotive industry value chain is still very low, this paper did analysis regarding the current situation...

  15. Concept and ripple effect of negotiation for automobile CO{sub 2} emission regulation

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hwa Jin [Korea Environment Institute, Seoul (Korea)

    2000-06-01

    The present average of automobile CO{sub 2} emission in Korea is about 220g/km, so it is hard to achieve reduction goal concluded with EU with present technology capability. In such a situation, it is required a long-term R and D strategy on direct jet engine, hybrid engine, diesel automobile development and other mileage improving technology which need huge initial investment cost. Furthermore, the efforts on alternative fuel automobile technology are needed. When a long-term strategy of corporation and a competitiveness policy of government are integrated properly, then it is possible to establish two goals, environmental protection and maintenance of industrial competitiveness, simultaneously. However, the emission reduction goal that is proposed by EU is still too high to achieve for Korean companies.

  16. Kinetic considerations of three-way catalysis in automobile exhaust converters

    International Nuclear Information System (INIS)

    Botas, J.A.; Gutierrez-Ortiz, M.A.; Gonzalez-Marcos, M.P.; Gonzalez-Marcos, J.A.; Gonzalez-Velasco, J.R.

    2001-01-01

    The activity of three-way catalysts is highly dependent on the reactants present in the automobile exhaust gases (CO, NO x , HC, O 2 , H 2 O, CO 2 , N 2 ) as well as their relative concentration. Thus, the influence of each reactant on the kinetic behavior of the whole mixture makes difficult to establish the accurate kinetics of the system. Activity experiments carried out close to the real operation conditions (GHSV, concentration, etc.) with a Pt/CeO 2 /Al 2 O 3 catalyst supplied data on the CO and HC oxidation and NO reduction reactions in environments formed by different reactant combinations (from binary mixtures to the whole mixture simulating the real conditions at the automobile converter).The obtained results have shown notable variations in the oxidation/reduction mechanisms depending on the presence (or absence) of components in the environment. The presence of water always promoted the three-way activity of the catalyst. The compensation effect applied to the CO, NO and HC conversions confirmed that kinetic expressions obtained with partial mixtures (not very close to the real converter environment) have only limited application for determining the whole kinetic scheme occurring in the automobile converters

  17. Subjective measures of work-related fatigue in automobile factory employees.

    Science.gov (United States)

    Guo, Fu; Wang, Tianbo; Ning, Zuojiang

    2017-01-01

    Work-related fatigue is common among automobile factory employees. The purpose of this study was to assess fatigue of employees at a Chinese automobile factory. 238 employees (119 engineers and 119 workers) participated in this study. The following questionnaires were completed: demographic survey questionnaire, working condition questionnaire (WCQ), functional assessment of chronic illness therapy-fatigue (FACIT-F), subscales of multidimensional fatigue inventory (MFI), and Pittsburgh sleep quality index (PSQI). Both engineers and workers experienced fatigue. The workers (35.6 years old, SD = 6.7) generally felt more fatigue than engineers (42.6 years old, SD = 6.4). The engineers claimed to be more satisfied with the working conditions than workers. The WCQ showed good properties for assessing work-related factors, which were significantly correlated with fatigue (r = 0.568 for engineers and r = 0.639 for workers). For engineers, general fatigue was observed regularly and frequently, and for workers, physical fatigue usually had a long duration. The fatigue was significantly correlated with work-related factors, especially working environment and monotony. For workers, the duration of the work day also affected their fatigue. Some improvements to the working condition in this automobile factory should be considered.

  18. Modern steels for light automobiles (review)

    Science.gov (United States)

    Tikhonov, A. K.

    1994-10-01

    The article considers the directions of work at VAZ together with metallurgists of the CIS for creating highly efficient economically-alloyed and microalloyed steels; highly ductile forged steels with improved corrosion resistance coated with zinc and with good stamping, welding, and painting capacity. Steels are created for petrol tanks with aluminum-zinc coatings instead of lead, and new heat and corrosion-resistant steels are developed for automobile exhaust gas systems.

  19. Daredevils and early birds: Belgian pioneers in automobile racing and aerial sports during the belle époque.

    Science.gov (United States)

    Ameye, Thomas; Gils, Bieke; Delheye, Pascal

    2011-01-01

    During the belle époque, Belgium was a trend-setting nation in many domains, including motorised sports. Belgian automobile racers and pilots shattered world records and became international stars. Striking was the shift in sports. Indeed, around 1896, sporting members of the leisure class stepped from the bicycle into the automobile and, around 1908, from the automobile into the airplane. Although these motorised sports were extremely expensive, this article shows that sportsmen and sportswomen from the working class could achieve upward social mobility through their performances. The achievements of these motorised pioneers had a major impact and wide-ranging significance. They laid the foundations for the expansion of the automobile industry and the emergence of civilian and military aviation.

  20. Managing bottlenecks in manual automobile assembly systems using discrete event simulation

    Directory of Open Access Journals (Sweden)

    Dewa, M.

    2013-08-01

    Full Text Available Batch model lines are quite handy when the demand for each product is moderate. However, they are characterised by high work-in-progress inventories, lost production time when changing over models, and reduced flexibility when it comes to altering production rates as product demand changes. On the other hand, mixed model lines can offer reduced work-in-progress inventory and increased flexibility. The object of this paper is to illustrate that a manual automobile assembling system can be optimised through managing bottlenecks by ensuring high workstation utilisation, reducing queue lengths before stations and reducing station downtime. A case study from the automobile industry is used for data collection. A model is developed through the use of simulation software. The model is then verified and validated before a detailed bottleneck analysis is conducted. An operational strategy is then proposed for optimal bottleneck management. Although the paper focuses on improving automobile assembly systems in batch mode, the methodology can also be applied in single model manual and automated production lines.

  1. THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

    Directory of Open Access Journals (Sweden)

    Kirill Iurievich Bely

    2015-09-01

    Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

  2. Performance evaluation of effluent treatment plant for automobile industry

    Energy Technology Data Exchange (ETDEWEB)

    Ansari, Farid [Department of Applied Science and Humanities, PDM College of Engineering, Bahadurgarh (Haryana) (India); Pandey, Yashwant K. [School of Energy and Environmental Studies, Devi Ahilya Vishwavidyalaya, Indore (India); Kumar, P.; Pandey, Priyanka [Department of Environmental Science, Post Graduate College Ghazipur (IN

    2013-07-01

    The automobile industry’s wastewater not only contains high levels of suspended and total solids such as oil, grease, dyestuff, chromium, phosphate in washing products, and coloring, at various stages of manufacturing but also, a significant amount of dissolved organics, resulting in high BOD or COD loads. The study reveals the performance, evaluation and operational aspects of effluent treatment plant and its treatability, rather than the contamination status of the real property. The Results revealed that the treated effluent shows most of the parameters are within permissible limits of Central Pollution Control Board (CPCB), India and based on the site visits, discussion with operation peoples, evaluation of process design, treatment system, existing effluent discharge, results of sample analyzed and found that effluent treatment plant of automobile industry are under performance satisfactory.

  3. Measurement of Gamma Radiation in an Automobile Mechanic ...

    African Journals Online (AJOL)

    Environmental radiation measurement was carried out in an automobile mechanic village, Apo, Abuja, Nigeria. An in-situ measurement approach was adopted using RDS-200 Universal Survey Meter and a handheld Global Positioning System (Garmin GPS 76S) equipment. It was observed that the dose equivalent varied ...

  4. Reduced Haematopoietic Output in Automobile Mechanics and Sprayers with Chronic Exposure to Petrochemicals: A Case-Control Study in Cape Coast, Ghana.

    Science.gov (United States)

    Adu, Patrick; Pobee, Richard; Awuah, Aaron; Asiamah, Paul B; Amoani, Festus; Gyabaa, Sampson

    2018-01-01

    Automobile mechanics and sprayers are at a higher risk of exposure to hazardous chemicals such as polycyclic aromatic hydrocarbons and heavy metals which may cause adverse health outcomes. This study aimed to use reticulocyte count as an indirect measure of the haematological output in automobile mechanics and sprayers in the Cape Coast Metropolis, Ghana. This cross-sectional study recruited 130 participants: 90 cases (57 automobile mechanics and 33 automobile sprayers) and 40 controls (nonautomobile workers). Venous blood samples were drawn from the participants and examined for full blood count and absolute reticulocyte count. Semi-structured questionnaire was used to collect demographic and occupational safety information from participants. 75.6% of cases had never received occupational safety training. Whereas 35.1% of automobile mechanics routinely siphoned fuel, 36.4% of automobile sprayers never used nose masks in the discharge of their duties. Controls had significantly higher WBC counts compared to mechanics ( p = 0.0001; 5.04 ± 1.7 versus 3.81 ± 1.1), or sprayers ( p = 0.0004; 5.04 ± 1.7 versus 3.74 ± 0.9). Lymphocyte, monocyte, and platelet counts were also significantly higher in controls compared to cases. Whereas RBC counts were significantly higher in controls compared to automobile mechanics (4.85 versus 4.66; p = 0.034), haemoglobin levels were significantly higher in automobile sprayers compared to controls (15.13 versus 14.1 g/dl; p = 0.0126). Absolute reticulocyte count was significantly higher in controls compared to cases [ p mechanics)]. Among the cases however, only RBC counts were significantly lower in automobile mechanics compared to automobile sprayers ( p = 0.0088; 4.66 ± 0.4 versus 4.85 ± 0.5). It was evident that both automobile mechanics and sprayers had significantly reduced haematopoietic output. Occupational safety training is not given priority and must be addressed.

  5. The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O; Pinchon, Ph

    2004-07-01

    In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

  6. Quantifying the association between obesity, automobile travel, and caloric intake.

    Science.gov (United States)

    Behzad, Banafsheh; King, Douglas M; Jacobson, Sheldon H

    2013-02-01

    The objective of this study is to assess the association between average adult body mass index (BMI), automobile travel, and caloric intake in the US in order to predict future trends of adult obesity. Annual BMI data (1984-2010) from the Behavioral Risk Factor Surveillance System (BRFSS), vehicle miles traveled data (1970-2009) from the Federal Highway Administration, licensed drivers data (1970-2009) from the Federal Highway Administration, and adult average daily caloric intake data (1970-2009) from the US Department of Agriculture were collected. A statistical model is proposed to capture multicollinearity across the independent variables. The proposed statistical model provides an estimate of changes in the average adult BMI associated with changes in automobile travel and caloric intake. According to this model, reducing daily automobile travel by one mile per driver would be associated with a 0.21 kg/m(2) reduction in the national average BMI after six years. Reducing daily caloric intake by 100 calories per person would be associated with a 0.16 kg/m(2) reduction in the national average BMI after three years. Making small changes in travel or diet choices may lead to comparable obesity interventions, implying that travel-based interventions may be as effective as dietary interventions. Copyright © 2012 Elsevier Inc. All rights reserved.

  7. Impact Analysis of Transportation Modal Shift on Regional Energy Consumption and Environmental Level: Focused on Electric Automobiles

    OpenAIRE

    Hong Bae Kim; Chang Ho Hur

    2016-01-01

    Many governments have tried to reduce CO2 emissions which are believed to be the main cause for global warming. The deployment of electric automobiles is regarded as an effective way to reduce CO2 emissions. The Korean government has planned to deploy about 200,000 electric automobiles. The policy for the deployment of electric automobiles aims at not only decreasing gasoline consumption but also increasing electricity production. However, if an electricity consuming regions is not consistent...

  8. Applicability of Talent Management with Special Reference to Automobile Industry of Krishnagiri District

    OpenAIRE

    R. Santoshkumar; Dr. N. Rajasekar

    2011-01-01

    This research paper examines the applicability of Talent Management in Automobile Industry in Krishnagiri district. The primary data collected from the 100 different levels of employees in automobile industry. Hypothesis test used to measure the applicability of talent management. This paper found the executives feel that Talent Management is the competitive Advantage for the company; they believe that their company’s recruitment policy is leveraged towards recruiting top talent. This study...

  9. Trends in chassis and automobile electronics components

    Energy Technology Data Exchange (ETDEWEB)

    Hackenberg, Ulrich [Volkswagen AG, Wolfsburg (Germany)

    2008-07-01

    The rapidly-growing importance of electronics in automobile construction is in part determined by the debate on sustainability and the clear trend towards electric power trains. Another factor, however, is the decisive impact of electronics on the further development of components, e.g. for chassis. Apart from environmental protection, key motivators for component development include comfort, safety, infotainment and driver assistance. (orig.)

  10. [Reduction of automobile traffic: urgent health promotion policy].

    Science.gov (United States)

    Tapia Granados, J A

    1998-03-01

    During the last few decades, traffic injuries have become one of the leading causes of death and disability in the world. In urban areas, traffic congestion, noise, and emissions from motor vehicles produce subjective disturbances and detectable pathological effects. More than one billion people are exposed to harmful levels of environmental pollution. Because its combustion engine generates carbon dioxide (CO2), the automobile is one of the chief sources of the gases that are causing the greenhouse effect. The latter has already caused a rise in the average ambient temperature, and over the next decades it will predictable cause significant climatic changes whose consequences, though uncertain, are likely to be harmful and possibly catastrophic. Aside from the greenhouse effect, the relentless growth of parking zones, traffic, and the roadway infrastructure in urban and rural areas is currently one of the leading causes of environmental degradation. Urban development, which is nearly always "planned" around traffic instead of people, leads to a significant deterioration in the quality of life, while it also destroys the social fabric. Unlike the private automobile, public transportation, bicycles, and walking help reduce pollution, congestion, and traffic volume, as well as the morbidity and mortality resulting from injuries and ailments related to pollution. Non-automobile transportation also encourages physical activity--with its positive effect on general health--and helps reduce the greenhouse effect. The drop in traffic volume and the increased use of alternate means of transportation are thus an integrated health promotion policy which should become an inherent part of the movement for the promotion of healthy cities and of transportation policies and economic policy in general.

  11. 29 CFR 785.40 - When private automobile is used in travel away from home community.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false When private automobile is used in travel away from home community. 785.40 Section 785.40 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... WORKED Application of Principles Traveltime § 785.40 When private automobile is used in travel away from...

  12. Automobile industry and new bio-fuel oils: International panorama

    International Nuclear Information System (INIS)

    Hampel, G.

    1992-01-01

    In assessing the technical/economic feasibility of the direct combustion of vegetable oils in diesel type engines, this paper first points out the good results obtained in performance tests on these fuels in Elsberg engines, and their low sulfur and nitrogen oxides and carbon dioxide emission characteristics. It then assesses the improvements that are necessary in the development of marketable bio-fuel oils that conform to European Communities air pollution standards for automobiles. Further efforts must be made to reduce bio-fuel oil smoke emission levels, to compensate for their lower calorific value as compared with conventional diesel fuels, and to make them compatible with automobile finishing materials - paints and plastics. The paper suggests a set of suitable fiscal policies designed to favour the marketing of bio-diesel fuels based on their favourable pollution abating qualities - low greenhouse gas emissions and biodegradability

  13. Vertical Keiretsu and International Market Entry: The Case of the Japanese Automobile Ancillary Industry

    OpenAIRE

    Kunal Banerji; Rakesh B Sambharya

    1996-01-01

    This study investigated whether small Japanese automobile ancillary firms followed the major Japanese automakers in setting up production facilities in the United States. Based on Dunning's eclectic theory of foreign direct investment and resource dependence theory, hypotheses were generated to explain the determinants of foreign investment of Japanese suppliers. It was hypothesized that mutual dependencies between the major Japanese automobile firms and their suppliers, firm-specific ownersh...

  14. Emissions and prevention/control techniques for automobile body shops in Ciudad Juarez, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Jeffery, J.D.; Sager, M.

    1999-08-01

    Emissions of Volatile Organic Compounds (VOC) from automobile body repair shops are believed to be significant and to contribute to ozone nonattainment in El Paso, Texas and to violations of ozone air quality standards in Ciudad Juarez, Mexico. The Direccion de Desarrollo Urbano Y Ecologia (DDUE), (the local agency in Ciudad Juarez, Mexico) requested CICA's assistance in determining emissions from and identifying appropriate pollution prevention and control techniques for automobile body repair shops in Ciudad Juarez.

  15. The Development of Green Clusters of the Automobile Industry in the Russian Region

    Directory of Open Access Journals (Sweden)

    Alexander A. Khokhlov

    2017-06-01

    Full Text Available The article shows the expediency of forming of a green cluster of the automobile industry and indicates the possibility of implementation through the development of electric vehicles as one of the environmentally friendly modes of transport. It is proved that their production requires the joint efforts of the automobile industry, small and medium business enterprises and organizations in other industries that manufacture components and equipment for electric cars. Further the possibility and expediency of launching of environmentally friendly vehicles is proved through the provision of issue in the process of import substitution in the automotive industry. The assumed centres of the green clusters of the automobile industry are selected, they are companies that are potential manufacturers of automobiles, having the properties of environmentally friendly vehicles: PJSC "AVTOVAZ", "GAZ". The scheme of realization of perspective projects on creation of models and production of electric vehicles is represented in the framework of activation of cooperation between state, municipal and business structures in the Russian regions. It is proposed as an institutional form of their interaction to use the concept of a consortium of the automotive industry, which principles are reflected in the text. It is concluded that in the automotive industry in the Russian regions there are possibilities of formation of territorial and production clusters based on the foundations of a green economy in the Russian Federation.

  16. Emergency distress call system for automobiles in Lagos state, Nigeria

    African Journals Online (AJOL)

    Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

  17. Hybrid modeling and empirical analysis of automobile supply chain network

    Science.gov (United States)

    Sun, Jun-yan; Tang, Jian-ming; Fu, Wei-ping; Wu, Bing-ying

    2017-05-01

    Based on the connection mechanism of nodes which automatically select upstream and downstream agents, a simulation model for dynamic evolutionary process of consumer-driven automobile supply chain is established by integrating ABM and discrete modeling in the GIS-based map. Firstly, the rationality is proved by analyzing the consistency of sales and changes in various agent parameters between the simulation model and a real automobile supply chain. Second, through complex network theory, hierarchical structures of the model and relationships of networks at different levels are analyzed to calculate various characteristic parameters such as mean distance, mean clustering coefficients, and degree distributions. By doing so, it verifies that the model is a typical scale-free network and small-world network. Finally, the motion law of this model is analyzed from the perspective of complex self-adaptive systems. The chaotic state of the simulation system is verified, which suggests that this system has typical nonlinear characteristics. This model not only macroscopically illustrates the dynamic evolution of complex networks of automobile supply chain but also microcosmically reflects the business process of each agent. Moreover, the model construction and simulation of the system by means of combining CAS theory and complex networks supplies a novel method for supply chain analysis, as well as theory bases and experience for supply chain analysis of auto companies.

  18. Report for fiscal 1998 on feasibility study for introduction of electric automobiles; 1998 nendo denki jidosha donyu kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Surveys have been made on the characteristics of environmentally harmonizing automobiles, and the status of development and introduction thereof inside and outside the country. Discussions were given on the possibility of introducing electric automobiles in Japan. In developing environmentally harmonizing automobiles in Japan, works have been executed on low pollution type components such as lean burn engines, electric automobiles, gasoline engine and electric motor hybrid cars, methanol fueled cars, and fuel cell automobiles. Some of them are already in use in spite of their high price. In America, a cooperation project for the next generation cars has been implemented by mobilizing industrial, academic and governmental organizations. Based on the achievements thereof, the car makers have announced their original advanced cars respectively. In the EU, development of low exhaust gas cars and zero emission cars is being carried out jointly by the related industries setting years 2003 to 2005 as the target. An urban type traffic system utilizing electric vehicles, and a traffic system dividing movements of short distance and long distance are proposed as the means to introduce the future electric automobiles. (NEDO)

  19. Esophageal rupture caused by explosion of an automobile tire tube: a case report.

    Science.gov (United States)

    Yu, Yongkang; Ding, Sheng; Zheng, Yifeng; Li, Wei; Yang, Lie; Zheng, Xiushan; Liu, Xiaoyan; Jiang, Jianqing

    2013-08-23

    There have been no reports in the literature of esophageal rupture in adults resulting from an explosion of an automobile tire. We report the first case of just such an occurrence after an individual bit into a tire, causing it to explode in his mouth. A 47-year-old Han Chinese man presented with massive hemorrhage in his left eye after he accidentally bit an automobile tire tube which burst into his mouth. He was diagnosed with esophageal rupture based on a chest computed tomography scan and barium swallow examination. Drainage of empyema (right chest), removal of thoracic esophagus, exposure of cervical esophagus, cardiac ligation and gastrostomy were performed respectively. After that, esophagogastrostomy was performed. Successful anastomosis was obtained at the neck with no postoperative complications 3 months after the surgery. The patient was discharged with satisfactory outcomes. We present this case report to bring attention to esophageal rupture in adults during the explosion of an automobile tire tube in the mouth.

  20. Study on Micro Wind Generator System for Automobile

    Science.gov (United States)

    Fujimoto, Koji; Washizu, Shinsuke; Ichikawa, Tomohiko; Yukita, Kazuto; Goto, Yasuyuki; Ichiyanagi, Katsuhiro; Oshima, Takamitsu; Hayashi, Niichi; Tobi, Nobuo

    This paper proposes the micro wind generator system for automobile. This proposes system is composed of the deflector, the micro windmill, the generator, and electric storage device. Then, the effectiveness is confirmed from an examination using air blower. Therefore, new energy can be expected to be obtained by installing this system in the truck.

  1. Assessment of soil-pollution by slag from an automobile battery ...

    African Journals Online (AJOL)

    Administrator

    automobile battery manufacturing plant in Nigeria. Gilbert U. Adie1* and .... Contamination of the environment with heavy metals .... assessment of heavy metal contamination using ..... contact with the soil or through food chain with water,.

  2. Evaluation of purchase intention of customers in two wheeler automobile segment: AHP and TOPSIS

    Science.gov (United States)

    Sri Yogi, Kottala

    2018-03-01

    Winning heart of customers is preeminent main design of any business organization in global business environment. This paper explored customer’s priorities while purchasing a two wheeler automobile segment using Analytical Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) as a multi criteria decision making tools to accomplish the research objectives. Study has been done to analyze different criteria to be considered during purchasing of two wheeler automobiles among respondents using structured questionnaire based on SAATY scale. Based on our previous work on empirical & fuzzy logic approach to product quality and purchase intention of customers in two wheeler- operational, performance, economic, brand value and maintenance aspects are considered as decision criteria of customers while purchasing a two wheeler. The study suggests high pick up during overtaking, petrol saving, reasonable spare parts price, unique in design and identity and easy to change gear as main criterion in purchasing process. We also found some leading two wheeler automobiles models available in Indian market using some objective function criterion in choosing some important characteristics like price, cylinder capacity, brake horse power and weight during purchasing process of two wheeler automobile in Indian market based on respondents perception.

  3. Smog and Your Automobile. [Teacher's Manual, Filmstrip, Record].

    Science.gov (United States)

    California State Dept. of Public Health, Berkeley.

    A filmstrip, 33 1/3 RPM record, and teacher's manual are combined in this set to be used in driver education classes at the senior high school level. Their main purpose is to inform future drivers how they can minimize pollution from their automobiles through proper car maintenance and good driving habits. Content of the manual is divided into…

  4. Characterization of biological aerosol exposure risks from automobile air conditioning system.

    Science.gov (United States)

    Li, Jing; Li, Mingzhen; Shen, Fangxia; Zou, Zhuanglei; Yao, Maosheng; Wu, Chang-yu

    2013-09-17

    Although use of automobile air conditioning (AC) was shown to reduce in-vehicle particle levels, the characterization of its microbial aerosol exposure risks is lacking. Here, both AC and engine filter dust samples were collected from 30 automobiles in four different geographical locations in China. Biological contents (bacteria, fungi, and endotoxin) were studied using culturing, high-throughput gene sequence, and Limulus amebocyte lysate (LAL) methods. In-vehicle viable bioaerosol concentrations were directly monitored using an ultraviolet aerodynamic particle sizer (UVAPS) before and after use of AC for 5, 10, and 15 min. Regardless of locations, the vehicle AC filter dusts were found to be laden with high levels of bacteria (up to 26,150 CFU/mg), fungi (up to 1287 CFU/mg), and endotoxin (up to 5527 EU/mg). More than 400 unique bacterial species, including human opportunistic pathogens, were detected in the filter dusts. In addition, allergenic fungal species were also found abundant. Surprisingly, unexpected fluorescent peaks around 2.5 μm were observed during the first 5 min use of AC, which was attributed to the reaerosolization of those filter-borne microbial agents. The information obtained here can assist in minimizing or preventing the respiratory allergy or infection risk from the use of automobile AC system.

  5. Bioaccumulation of Heavy Metals by Moringa Oleifera in Automobile ...

    African Journals Online (AJOL)

    Plants accumulate minerals essential for their growth from the environment alongside with heavy metals from contaminated areas.This study investigated bioaccumulation of heavy metals by Moringa oleifera in automobile workshops in three selected local government areas in Ibadan. This was done with a view to ...

  6. OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Sujit Kumar Jha

    2013-06-01

    Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine.

  7. Assessing Cognitive Distraction in the Automobile.

    Science.gov (United States)

    Strayer, David L; Turrill, Jonna; Cooper, Joel M; Coleman, James R; Medeiros-Ward, Nathan; Biondi, Francesco

    2015-12-01

    The objective was to establish a systematic framework for measuring and understanding cognitive distraction in the automobile. Driver distraction from secondary in-vehicle activities is increasingly recognized as a significant source of injuries and fatalities on the roadway. Across three studies, participants completed eight in-vehicle tasks commonly performed by the driver of an automobile. Primary, secondary, subjective, and physiological measures were collected and integrated into a cognitive distraction scale. In-vehicle activities, such as listening to the radio or an audio book, were associated with a low level of cognitive workload; the conversation activities of talking to a passenger in the vehicle or conversing with a friend on a handheld or hands-free cell phone were associated with a moderate level of cognitive workload; and using a speech-to-text interfaced e-mail system involved a high level of cognitive workload. The research established that there are significant impairments to driving that stem from the diversion of attention from the task of operating a motor vehicle and that the impairments to driving are directly related to the cognitive workload of these in-vehicle activities. Moreover, the adoption of voice-based systems in the vehicle may have unintended consequences that adversely affect traffic safety. These findings can be used to help inform scientifically based policies on driver distraction, particularly as they relate to cognitive distraction stemming from the diversion of attention to other concurrent activities in the vehicle. © 2015, Human Factors and Ergonomics Society.

  8. The Analysis of Vertical Transaction Behavior and Performance Based on Automobile Brand Trust in Supply Chain

    Directory of Open Access Journals (Sweden)

    Guanglan Zhou

    2016-01-01

    Full Text Available The nontrust behaviors among the automobile supply chain members lead to a trust crisis situation. Under such circumstances, this paper studies the mutual influences of trust, enterprise behavior, and transaction performance on the independent brand automobile supply chain. The business behavior concept which consists of information sharing, joint action, and specific asset investment is proposed. Then, the paper tests the reliability and validity of the collected data through Structural Equation Modeling (SEM. Through empirical test and analysis on mutual relationship among vertical transaction enterprise behaviors, trust, and transaction performance, the vertical transaction enterprise behaviors can be regulated, so as to improve the efficiency of independent brand automobile supply chain.

  9. Evaluation of genotoxicity in automobile mechanics occupationally exposed to polycyclic aromatic hydrocarbons using micronuclei and other nuclear abnormalities.

    Science.gov (United States)

    Khan, Mohammed Rafiq; Sudha, Sellappa

    2012-01-01

    Occupational and environmental exposures mostly represent mixtures of genotoxic agents, whereas the specificity of biomarker measurements varies widely. Exploration of correlations among biomarkers contributes to the further progress of molecular cancer epidemiology and to the selection of the optimal biomarkers for the investigation of human exposure to carcinogens. The aim of this study was to assess the potential cytogenetic damage associated with occupational exposure to Polycyclic Aromatic Hydrocarbons (PAHs) among automobile mechanics by using Micronuclei (MN) and other Nuclear Abnormalities (NA) as a biomarker. The study population composed of 110 occupationally exposed automobile mechanics and 100 unexposed controls. All the study participants were males. Both the exposed and control individuals were selected from automobile garages located in the urban area of Coimbatore City, South India. Exfoliated buccal cells were collected from 110 automobile mechanics and 100 age and sex matched controls. Further, cells were examined for MN frequency and Nuclear Abnormalities (NA) other than micronuclei, such as binucleates, broken eggs and karyolysis. Results showed a statistically significant difference between occupationally exposed automobile mechanics and control groups. MN and NA frequencies in automobile mechanics were significantly higher than those in control groups (p < 0.05) and also significantly related to smoking habit (p < 0.05). In addition, a higher degree of NA was observed among the exposed subjects with smoking, drinking, tobacco chewing, which is an indicative of cytogenetic damage in these individuals. MN and other NA reflect genetic changes, events associated with carcinogenesis. Therefore, the results of this study indicate that automobile mechanics exposed to PAHs are under risk of significant cytogenetic damage. Therefore, it is important to provide and offer better awareness of occupational hazards among these workers to promote

  10. Alternative propulsion for automobiles

    CERN Document Server

    Stan, Cornel

    2017-01-01

    The book presents – based on the most recent research and development results worldwide - the perspectives of new propulsion concepts such as electric cars with batteries and fuel cells, and furthermore plug in hybrids with conventional and alternative fuels. The propulsion concepts are evaluated based on specific power, torque characteristic, acceleration behaviour, specific fuel consumption and pollutant emissions. The alternative fuels are discussed in terms of availability, production, technical complexity of the storage on board, costs, safety and infrastructure. The book presents summarized data about vehicles with electric and hybrid propulsion. The propulsion of future cars will be marked by diversity – from compact electric city cars and range extender vehicles for suburban and rural areas up to hybrid or plug in SUV´s, Pick up´s and luxury class automobiles.

  11. Kryptonate-based instrumentation development for automobile exhaust pollutants. Phase III report: design and construction of four (4) experimental models

    International Nuclear Information System (INIS)

    Goodman, P.; Donaghue, T.

    This phase of the program encompasses the design, construction and evaluation of four (4) prototype instruments for the detection of automobile exhaust pollutant. These instruments employ the radio release mechanism utilized by Panametrics in detection of various trace gases. The prototype instruments are of two (2) designs. One design is operable from a power source supplied by an automobile battery. The second design is operable from 110 volts AC power. Successful evaluation in the laboratory as well as with various automobiles were performed with both type instruments. Scale-up of the quantity of sensor material prepared introduced unexpected problems with respect to detection lifetime which were not satisfactorily resolved within the time and funds available to the program. Nevertheless, a Kryptonate-based instrument using a single detection method for the measurement of hydrocarbons, CO and NO/sub x/ as pollutants by automobile exhausts was shown to be operable with actual automobile exhausts, to provide more than adequate sensitivity for inspection purposes, and to provide response and recovery times for full scale reading in the range 10-15 secs. (auth)

  12. Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, W B; Li, D S; Lu, Y [China Jiliang University, Hangzhou, Zhejiang province, 310018 (China)

    2006-10-15

    Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request.

  13. Investigation of Electrical Energy Efficiency Use in an Automobile Assembly Industry

    Directory of Open Access Journals (Sweden)

    Jacob TSADO

    2016-12-01

    Full Text Available This research work investigated the electrical energy efficiency improvement and cost saving potentials for automobile assembly plant; a case of Peugeot Automobile Nigeria Limited. The study identified lighting system as a major source through which energy is being wasted, hence efficient energy saving lighting systems are being proffered; also saving accrued were determined to justify their deployment. In the course of this work, an energy saving calculating tool was developed to calculate energy saving capabilities using energy efficient lamps. With ample devotion to the implementation of the recommendations made, the cost of energy per car will be drastically reduced while profits are also made simultaneously. In all, more cars will be produced thus translating to more employment opportunities in the industry.

  14. Real Time Speed Measure while Automobile Braking on Soft Sensing Technique

    International Nuclear Information System (INIS)

    Zhu, W B; Li, D S; Lu, Y

    2006-01-01

    Because the braking performance of automobile has close relationship to traffic safety, it is important to detect that. Focusing on the problem that the real time speed is difficult to obtain in detection process, soft sensing technique is introduced in this paper. According to analyzing the relationship of the dynamics equation of a moving automobile, a module of real time speed of braking is set up. By using imitation method with experiment data to get the pressure function of cylinder and analyzing the relationship between the trigging moment of a wheel and the pressure function of brake cylinder, the real time speed is confirmed in good precision. The maximal measurement error of real time speed is 8.7% and the precision can satisfy engineering request

  15. SYNTHESIS OF AUTOMOBILE IGNITION SYSTEM USING OZONIZED FUEL

    Directory of Open Access Journals (Sweden)

    O. M. Pilipenko

    2015-01-01

    Full Text Available The paper presents a mathematical model for electronic control system of the angular ignition timing (AIT in the (ICE, which is running on ozonized fuel. An algorithm for  ignition system control of internal combustion engine using ozonized fuel has been developed in the paper. A structure of the dynamic ignition system while using a control unit for supplying  ozone into fuel with a purpose to improve automobile ecological and economical indices adapted to operational conditions. Application of the given system allows to ensure minimum reduction of operational petrol consumption and concentration of incomplete combustion products due to optimum ozone dosage into the fuel.  The paper proposes a controlled automobile ignition system as a sequential scheme which has a great number of discrete inputs and outputs and many discrete internal  states. The scheme establishes a functional dependence between input and output states. The paper provides an assessment of ecological indices according to massive emissions of carbon monoxide СО, hydrocarbon СпНт and nitric oxide NOx .  The analysis of  investigations results has been carried out in the paper.

  16. The automobile of the future: engine technologies and automotive fuels developed by IFP; l'automobile du futur: les technologies moteurs et carburants developpes par l'IFP

    Energy Technology Data Exchange (ETDEWEB)

    Appert, O.; Pinchon, Ph.

    2004-07-01

    In front of the challenges of climate change and depletion of petroleum reserves, in front of the continuous strengthening of pollution regulations applied to automobile (Euro IV and V) and the advances of R and D, several ways of research can be explored to answer the mobility needs of the coming decades. The IFP takes stock of these topics in this press kit which comprises 11 documents: the synthesis of O. Appert and P. Pinchon's talk about 'the cleaner and multi-energies automobile of the future', the slides of this presentation, the future evolutions of automobiles motorizations, the long-term evolutions of engines/fuels (brief for the Panorama 2004 colloquium), diesel fuel in the USA (brief for the Panorama 2004 colloquium), bio-fuels in Europe (brief for the Panorama 2004 colloquium), diesel pollution abatement: efficient results from the IFP's diesel combustion process 'NADI'(TM), the presentation of the IFP scientific meeting of September 22-23, 2004 'which fuels for low CO{sub 2} engines?', the strategic positioning of IFP in the world energy and environmental context, the brochures 'IFP engines and fuels: a competitive advantage' and 'innovating for a sustainable development in the domain of energy'. (J.S.)

  17. Influence of Product Quality, Brand Image and Price Concerning Automobile Buying Decision of Toyota Avanza at PT. Nasmoco Majapahit Semarang

    OpenAIRE

    Putra, Arya Willis Nugraha; Waluyo, Handoyo Djoko; Nugraha, Hari Susanta

    2015-01-01

    This research was based on rapid automotive sector business development, especially automobile. Specifically, this research was discuss about automobile buying of Toyota Avanza brand at PT Nasmoco Majapahit Semarang during 2011 - 2014 keep have sale descending and it's sale target. If that case wasn't improve and solve, probably will presence problem for PT. Nasmoco Majapahit Semarang next.Aim of this research was to found product quality, brand image and price concerning automobile buying de...

  18. 29 CFR 500.104 - Department of Labor standards for passenger automobiles and station wagons and transportation of...

    Science.gov (United States)

    2010-07-01

    ... holding on an incline. Brake systems shall be free of leaks. (c) Tires. Tires shall have at least 2/32... 29 Labor 3 2010-07-01 2010-07-01 false Department of Labor standards for passenger automobiles and... of Labor standards for passenger automobiles and station wagons and transportation of seventy-five...

  19. Automobile Engine: Basic Ignition Timing. Fordson Bilingual Demonstration Project.

    Science.gov (United States)

    Vick, James E.

    These two vocational instructional modules on basic automobile ignition timing and on engine operation, four-stroke cycle, are two of eight such modules designed to assist recently arrived Arab students, limited in English proficiency (LEP), in critical instructional areas in a comprehensive high school. Goal stated for this module is for the…

  20. Micro-electronics and employment in the Japanese automobile industry.

    OpenAIRE

    Watanabe, S

    1984-01-01

    ILO pub-WEP pub. Working paper on the employment effects of microelectronics technological change and industrial robots in the motor vehicle industry in Japan - examines industrial processes, labour productivity, job requirements of automobile workers, effects on the subcontracting system and small scale industry, diffusion patterns and prospects, etc. Bibliography, references and statistical tables.

  1. 485 assessment of the problems of manual automobile tyre bead

    African Journals Online (AJOL)

    eobe

    rim bead bond must be broken to carry out repairs on a failed automobile tyre. ... engine will not be transformed into the motion of the vehicle. It provides the only point of contact between ..... Popular Mechanic 162 (6): 62. http://books.google.

  2. Factors behind international relocation and changes in production geography in the European automobile components industry

    OpenAIRE

    Jesús F. Lampón; Santiago Lago-Peñas

    2013-01-01

    This article analyses business strategies in the automobile sector to determine the key factors behind production relocation processes in automobile components suppliers. These factors help explain changes in production geography in the sector not only in terms of location advantages but also from a perspective of corporate strategies and decision-making mechanisms within firms. The results obtained from an empirical study in Spain during the period 2001-2008 show how the components sector h...

  3. Chinese automobile industry: opportunities and business; El sector automovilistico Chino: oportunidades y negocios

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Zhang, Y.

    2010-07-01

    The emergence of Chinese economy and its rapid recovery from global crisis have sustained a high rate of growth in Chinese automobile market. The article analyzes the industrial evolution of this particular market from the perspective of automobile manufacturers. Two concrete proposals have been suggested to explore these business opportunities exposed in the analyzed industry: investment in China to take advantage of market growth and hence gaining global competitive advantages, and being strategic partner of Chinese enterprises in European and global market. Strategic alternatives for both proposals have been discussed with suggestions and conclusions followed. (Author) 11 refs.

  4. Additives: The key for automobiles to meet new emission standards

    International Nuclear Information System (INIS)

    Friedman, J.R.

    1992-01-01

    Many cities have been perplexed with automobile emissions causing them to become non-attainment areas. These cities usually resort to such tactics as trying to get people to car pool. In principle the concept is excellent, however, the American public is not ready to give up the independence of using their own automobile. Reformulated gasolines are presently being produced and plans for additional plants are being made to meet EPA gasoline requirements. How much reformulated gasoline is available? Where is the present production going? Who else has needs? Does Gasohol have any possibilities still? What contribution can other additives make and are there any bright spots on the horizon and if so what are they? All this will be revealed in this talk and paper at ETE. There will also be a panel discussion for others to present their ideas and contribute to the program

  5. Automobile air-conditioning its energy and environmental impact; La climatisation automobile impact energetique et environnemental

    Energy Technology Data Exchange (ETDEWEB)

    Barbusse, St.; Gagnepain, L.

    2003-05-01

    Over the last three decades, automobile manufacturers have made a lot of progress in specific fuel consumption and engine emissions of pollutants. Yet the impact of these improvements on vehicle consumption has been limited by increased dynamic performances (maxi-mum speed, torque), increased safety (power steering and power brakes) and increased comfort (noise and vibration reduction, electric windows and thermal comfort). Because of this, the real CO{sub 2}-emission levels in vehicles is still high in a context where road transport is a major factor in the balance sheet of greenhouse gas emissions, thus in complying with the inter-national climate convention. Although European, Japanese and Korean manufacturers signed an important agreement with the European Commission for voluntarily reducing CO{sub 2} emissions from their vehicles, with a weighted average emission goal by sales of 140 grams per km on the MVEG approval cycle by 2008, it has to be noted that the European procedures for measuring fuel consumption and CO{sub 2} emissions do not take accessories into account, especially air-condition ng (A/C). The big dissemination of this equipment recognized as a big energy consumer and as using a refrigerant with a high global warming potential ed ADEME to implement a set of assessments of A/C's energy and environmental impact. In particular these assessments include studies of vehicle equipment rates, analyses of impact on fuel consumption as well as regulated pollutant emissions in the exhaust, a characterization of the refrigerant leakage levels and an estimate of greenhouse gas emissions for all air-conditioned vehicles. This leaflet summarizes the results of these actions. All of these studies and additional data are presented in greater detail in the document,-'Automobile Air-conditioning' (ADEME reference no. 4985). (author)

  6. OPTIMAL AUTOMOBILE MUFFLER VIBRATION AND NOISE ANALYSIS

    Directory of Open Access Journals (Sweden)

    Sujit Kumar Jha

    2013-06-01

    Full Text Available The muffler is the main part of the Automobile Exhaust System, consisting of fibrous and porous materials to absorb noise and vibrations. The exhaust gas mass coming from the engine can produce resonance, which may be the source of fatigue failure in the exhaust pipe due to the presence of continuous resonance. The modes on the muffler should be located away from the engine’s operating frequencies in order to minimise the resonance. The objective of this paper is to determine the frequencies that appear at the modes, which have the more adverse effect during the operation of the automobile. An impact test has been conducted by applying the force using a hard head hammer, and data generated have been used for plotting a graph of the transfer functions using MATLAB. Six points have been selected, namely 1, 2, 3, 4, 7, and 11 on the muffler for the impact test. The collected data from theses six points have been analysed for the addition of damping. Results suggests that increasing the mass increases the damping and lowers the modes of the transfer function. Further research will identify higher strength materials that can withstand the higher gas temperatures as well as the corrosion and erosion by the gas emitted from the engine. muffler, noise, vibration,modal analysis,

  7. Heat rejection efficiency research of new energy automobile radiators

    Science.gov (United States)

    Ma, W. S.; Shen, W. X.; Zhang, L. W.

    2018-03-01

    The driving system of new energy vehicle has larger heat load than conventional engine. How to ensure the heat dissipation performance of the cooling system is the focus of the design of new energy vehicle thermal management system. In this paper, the heat dissipation efficiency of the radiator of the hybrid electric vehicle is taken as the research object, the heat dissipation efficiency of the radiator of the new energy vehicle is studied through the multi-working-condition enthalpy difference test. In this paper, the test method in the current standard QC/T 468-2010 “automobile radiator” is taken, but not limited to the test conditions specified in the standard, 5 types of automobile radiator are chosen, each of them is tested 20 times in simulated condition of different wind speed and engine inlet temperature. Finally, regression analysis is carried out for the test results, and regression equation describing the relationship of radiator heat dissipation heat dissipation efficiency air side flow rate cooling medium velocity and inlet air temperature is obtained, and the influence rule is systematically discussed.

  8. The impact of internationalisation and rationalisation of production on the Spanish automobile industry, 1950 - 90

    OpenAIRE

    A Lagendijk

    1995-01-01

    The author examines the impact of the internationalisation of automobile production on the local production system in Spain, with emphasis on the relationship between the assembly and supply industries. After an introduction to the issue of linkage formation in the automobile industry, a historical overview of the development of the Spanish production system since the 1950s is presented. This is followed by an analysis of recent changes in the production and procurement strategies of internat...

  9. Assessment of the Problems of Manual Automobile Tyre Bead ...

    African Journals Online (AJOL)

    The tyre-rim bead bond must be broken to carry out repairs on a failed automobile tyre. The use of the locally fabricated manual bead breaking equipment as it is being practiced today by commercial tyre repair artisans in Nigeria is characterized by drudgery. This article reports a study of the local manual bead breaking ...

  10. Modernization of the Russian Automobile Road Network on the Base of Innovative Technologies

    Directory of Open Access Journals (Sweden)

    E. A. Zhukov

    2017-01-01

    Full Text Available Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: in the present study the following methods were used: systemic approach, methods of social diagnosis, comparative analysis, method of expert evaluations, and method of statistical processing of information. Results: the short characteristic of modern development and technical level of the Russian automobile roads network as the important part of the automobile roads material-technical base is presented. Realization process of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads is analyzed. The reality of decision this task due to modernization roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction is scientifically proved. Conclusions and Relevance: in spite of losing now in decision of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads, nevertheless the real possibilities to reach the important aim still remain. It may be done only due to scientifically grounded modernization of the roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction 

  11. Determinants of EDI (Electronic Data Interchange) Adoption and Integration in the US and Japanese Automobile Suppliers

    OpenAIRE

    Sam Kurokawa; Seiji Manabe

    2002-01-01

    This paper examines determinants of EDI adoption and integration in the US and Japanese automobile suppliers. The paper constructs several hypotheses based on the transaction-cost and resource- dependence approaches, and tests these hypotheses by using data from the automobile suppliers. Our study shows: (1) the resource-dependence approach seemed more effective in explaining EDI adoption, while the transaction-cost approach seemed more effective in explaining EDI integration; (2) the transac...

  12. Reduced-Order Computational Model for Low-Frequency Dynamics of Automobiles

    Directory of Open Access Journals (Sweden)

    A. Arnoux

    2013-01-01

    Full Text Available A reduced-order model is constructed to predict, for the low-frequency range, the dynamical responses in the stiff parts of an automobile constituted of stiff and flexible parts. The vehicle has then many elastic modes in this range due to the presence of many flexible parts and equipment. A nonusual reduced-order model is introduced. The family of the elastic modes is not used and is replaced by an adapted vector basis of the admissible space of global displacements. Such a construction requires a decomposition of the domain of the structure in subdomains in order to control the spatial wave length of the global displacements. The fast marching method is used to carry out the subdomain decomposition. A probabilistic model of uncertainties is introduced. The parameters controlling the level of uncertainties are estimated solving a statistical inverse problem. The methodology is validated with a large computational model of an automobile.

  13. Role of fin material and nanofluid in performance enhancement of automobile radiator

    Science.gov (United States)

    Jadar, Raju; Shashishekar, K. S.; Channa Keshava Naik, N.

    2018-04-01

    An effective cooling system can avoid engine and its components from overheating and helps in achieving optimum engine performance. This work deals with the fabrication and performance evaluation of an automobile radiator with i) Aluminum fins and ii) Al-MWCNT fins using 0.1 w/v% f-MWCNT nanofluid. F-MWCNT nanoparticles in the base fluid improves the rate of heat transfer in an automobile radiator integrated with Al-MWCNT fins. The enhancement of heat transfer mainly depends on the quantity of F-MWCNT nanoparticles added to the host fluid. During the study it was found that at a low weight by volume concentration of nanofluid the heat transfer enhancement of 8% was achieved using Al-MWCNT fins compared to base fluid.

  14. Characteristics of motorcyclists involved in accidents between motorcycles and automobiles.

    Science.gov (United States)

    Oliveira, Amanda Lima de; Petroianu, Andy; Gonçalves, Dafne Maria Villar; Pereira, Gisele Araújo; Alberti, Luiz Ronaldo

    2015-01-01

    traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession) and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver's license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11) years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%). Of the motorcyclists who held a car driver's license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver's license for at least one year. among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

  15. Six changes with the new Regulations on Automobile Loans

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> On Aug 16, 2004, the People’s Bank of China and China Banking Regulatory Commission (CBRC) jointly issued the new version of the Regulations on Automobile Loans. Due to be put into implementation on Oct 1, the new Regulations change radically compared with the previous version in terms of creditors, possible borrowers, rate of down payments, loan periods, etc.

  16. New Technology and Human Resource Development in the Automobile Industry.

    Science.gov (United States)

    Organisation for Economic Cooperation and Development, Paris (France). Centre for Educational Research and Innovation.

    This document contains five case studies of plants within large enterprises in the automobile industry (Ford, Toyota, Volkswagen, Renault, and Volvo), plus reports of each company's views on human resource development, new technology, and changes in work organization and skill formation. The document is composed of five narrative sections,…

  17. Study of CO2 automobile heating system. Paper no. IGEC-1-129

    International Nuclear Information System (INIS)

    Zha, S.; Hafner, A.

    2005-01-01

    Carbon dioxide has become a popular working medium in heat pump water heaters and mobile heat pumping systems due to its environment friendliness and its excellent thermal and transport properties in transcritical cycle. It also looks bright as a complete solution to environmental problem associated with automobile air conditionings. As high efficient mobile engines with less waste heat have been developed, extra heating of the passenger compartment is needed in the cold season. In this investigation, three heating solutions for automobile CO 2 air conditioning systems are provided. They are a bypass CO 2 heating cycle, a conventional CO 2 transcritical heat pump cycle and a high capacity heat pump cycle with economizer. These three solutions are compared with the viewpoints of the efficiency and heating capacity. The test results show that the heating capacity of the bypass heating method is only enough for a small automobile although it has the advantage of simple construction and low investment. The heat pump cycle with economizer applying a special construction reciprocating compressor can obtain a highest capacity even in cold climate. But the investment increase for economizer heat pump cycle includes both the modification of the compressor and the flash tank. And the COPh of economizer heat pump cycle is higher than bypass heating cycle, but lower than conventional heat pump cycle due to the highest capacity operation condition. (author)

  18. The automobile and maps in the integration of the Mexican territory, 1929-1962

    Directory of Open Access Journals (Sweden)

    Héctor Mendoza Vargas

    2015-12-01

    Full Text Available This article examines a new social geography opened by the use of the automobile and maps in the Mexican territory between 1929 and 1962. In this temporary scenery, the construction of roads during a considerable span of the 20th Century has been identified as part of the modernization plan of the revolutionary governments of Mexico. This infrastructure furnished the opportunity of getting to know the wide variety of landscapes of the country as never before. A set of new traveling experiences was offered to the middle class at the same time that such diversity of Mexican landscapes caused different emotions through the “pleasure” of ersonally contemplating the rivers, mountains, trees, vegetation, the sea, the hamlets, towns or cities. A central element of this perspective was occupied by the automobile; its presence in Mexico meant a cultural novelty with deep effects and changes in the Mexican society of the 20th Century. The new technological element worked as a new mechanism that started circulating by the roads to observe the landscape. Because of this, we propose the application of three key concepts of space analysis: the circulation territory, the visual territory and the experience territory. Each one of them represents the many sides of the landscape as one study object, and of geography interest, as described below. The territory of circulation came about when the railroads decline started in the twenties and consolidated in the sixties of the past century. That is why in this section we first place a comparative perspective of the motorization levels through the number of inhabitants per automobile in several Latin-American countries having available ordered historical statistics on the matter. Results show a long construction of the automobile culture in this geographic region; construction that incorporated new communication and evolution forms of social groups.

  19. [The epidemiological study of work-related musculoskeletal disorders and related factors among automobile assembly workers].

    Science.gov (United States)

    Wang, Zhong-Xu; Qin, Ru-Li; Li, Yu-Zhen; Zhang, Xue-Yan; Jia, Ning; Zhang, Qiu-Ling; Li, Gang; Zhao, Jie; Li, Huan-Huan; Jiang, Hai-Qiang

    2011-08-01

    To investigate the work-related musculoskeletal disorders among automobile assembly workers, to discusses the related risk factors and their relationship. The selected 1508 automobile assembly workers from a north car manufacturing company were regarded as the study object. The hazard zone jobs checklist, Nordic musculoskeletal symptom questionnaire (NMQ) and pain questionnaire were used to perform the epidemiological cross-sectional and retrospective survey and study for the General status, awkward ergonomics factors and related influencing factors, and musculoskeletal disorders of workers. The predominant body sites of occurring WMSDs among automobile assembly workers were mainly low back, wrist, neck and shoulders, the predominant workshop section of occurring WMSDs were mostly concentrated in engine compartment, interior ornament, door cover, chassis and debugging section. The predominant body site of WMSDs among engine compartment and chassis section workers was low back, interior ornament workers were low back and wrist, door cover workers was wrist, chassis workers was low back, debugging workers were neck and low back. Neck musculoskeletal disorders had the trend with the increase of a body height; Smoking may increase the occurrence of musculoskeletal disorders. The WMSDs appears to be a serious ergonomic proble assem among automobile assembly workers, predominant occurring site of WMSDs is with different workshop section, its characteristics is quite obvious, probably related to its existing awkward work position or activities. The worker height and smoking habits may be important factors which affect musculoskeletal disorders happen.

  20. Development of automobile brake lining using pulverized cow hooves

    Directory of Open Access Journals (Sweden)

    Katsina C. BALA

    2016-06-01

    Full Text Available Asbestos has been used for so long as automobile brake lining material because of its good physical and chemical properties. However, due to the health hazard associated with its handling, it has lost favour and several alternative materials are being increasingly used. Asbestos-free brake lining was developed in this work using pulverized cow hooves along with epoxy resin, barium sulphate, graphite and aluminium oxide. This was with a view to exploiting the characteristics of cow hooves, which are largely discarded as waste materials to replace asbestos which has been found to be carcinogenic. Samples of brake linings were produced using compressive moulding in which the physical and mechanical properties of the samples were studied. The results obtained showed that proper bonding was achieved as the percentage by weight of epoxy resin increased and percentage by weight of pulverized cow hooves decreased. The hardness, compressive strength, coefficient of friction, water and oil absorption, relative density and wear rate of the brake linings were determined and compared with existing brake lining properties. The result indicates that pulverized cow hooves can be used as brake lining material for automobiles.

  1. Wind driven mobile charging of automobile battery- A case study ...

    African Journals Online (AJOL)

    This paper deals with implementation of mobile wind driven generator technology to produce electricity in charging of two wheeler (12V) automobile battery. The use of PWM methodology with pulse charging method at a constant rate has been adopted for this purpose. The low speed PMSG driven by wind at speed of ...

  2. EVOLUTIONS IN GLOBAL AUTOMOBILES INDUSTRY

    Directory of Open Access Journals (Sweden)

    Viorel Pop

    2013-09-01

    Full Text Available This paper is a brief overview of the evolution of the global automotive industry during the 20th century, with reference to the main manufacturers, oil crises of 1970-1980, and also the global financial and economic crisis that began in 2008. The analyzed period covers the rise of the Asian Continent, beginning with Japan, then South Korea and more recently the emerging countries: China and India. What was predicted 20-25 years ago, became reality: Asia becomes the economic centre of the world, surpassing unexpectedly fast even the Euro-Atlantic area. Regarding Romania, the revival delay of the automobiles industry, led to the loss of the trucks and bus industry, and after a much awaited rehabilitation of car production, this has stuck now at an unsatisfactory level.

  3. Individualized solutions to environmental problems: a case of automobile pollution

    Energy Technology Data Exchange (ETDEWEB)

    Urmetzer, P.; Blake, D. E.; Guppy, N. [British Columbia Univ., Vancouver, BC (Canada)

    1999-09-01

    Air pollution associated with motor vehicle use is one of the prime indicators of the tension between consumerism and the environment. The use of private automobiles seems so convenient, whereas the alternatives are off-putting enough to make significant changes in personal transportation behaviour well-nigh impossible. At the same time, combating the air pollution associated with extensive use of cars has become one of the major policy objectives for cities around the world. Available policy alternatives can be divided into two categories: (1) incentives, such as improved public transportation, and (2) disincentives, such as environmental tax on gasoline. This paper attempt to directly assess links between these two alternatives, associated attitudes towards them, the level of public support for command and control (i.e. regulatory) policy approaches as well as for economic incentive/disincentive policies. Answers are sought and findings discussed relative to the link between opinions about the environment and support for different types of environmental policies, the usefulness of a rational choice perspective in explaining support for environmental policy alternatives, the role that partisan political attachments play in support of environmental policy approaches, and the roles played by environmental activism, knowledge, and action in shaping support for environmental policy alternatives. Overall results indicate that while most people living in urban environments support the ideas of environmental protection and would be willing to incur costs to confront the problem, exposure to air pollution plays an inconsequential (actually nearly non-existent) role in support of automobile-related environmental problems. Automobile users act like 'free-riders' i.e. they tend to support policies that socialize the cost of solutions rather than policies that attempt to pass the cost of pollution directly on to individual car owners. A sample of the responses to

  4. Characteristics of motorcyclists involved in accidents between motorcycles and automobiles

    Directory of Open Access Journals (Sweden)

    Amanda Lima de Oliveira

    2015-02-01

    Full Text Available Introduction: traffic accidents are one of the main causes of death and disability, with motorcyclists representing the great majority of both the victims and the perpetrators. Objective: this work studied the characteristics of motorcyclists injured in accidents involving motorcycles and automobiles. Method: this study sought to interview 100 motorcyclists who had been injured in collisions between motorcycles and automobiles, and who were undergoing emergency hospital treatment in the region of Belo Horizonte, Brazil. The questionnaires included demographic information (age, gender, skin color, education level, profession and questions about years of licensed driving practice, how often they would drive an automobile, how long they had had a motorcycle driver’s license, how often they would ride a motorcycle, the number of prior accidents involving a car, and the number of prior accidents not involving a car. Results: of the 100 consecutive accidents studied, 91 occurred with men and 9 with women, aged between 16 and 79 (m = 29 ± 11 years. Regarding their reason for using a motorcycle, 83% reported using it for transport, 7% for work, and 10% for leisure. Most of these accident victims had secondary or higher education (47%. Of the motorcyclists who held a car driver’s license, 68.3% drove the vehicle daily or weekly and held the license for more than one year. Sixty-seven percent of the accident victims used a motorcycle daily and had a motorcycle driver’s license for at least one year. Conclusion: among the motorcyclists injured, most were men aged 20 years or older, with complete secondary education, and experienced in driving both motorcycles and cars, indicating that recklessness while driving the motorcycle is the main cause of traffic accidents.

  5. 76 FR 31467 - Guide Concerning Fuel Economy Advertising for New Automobiles

    Science.gov (United States)

    2011-06-01

    ... the Fuel Economy Guide \\1\\ in 1975 to prevent deceptive fuel economy advertising for new automobiles... Economy Guide. That rulemaking will increase the coverage of EPA's new fuel economy labels to include... issue to new vehicle advertisers in the FTC's Fuel Economy Guide. Therefore, the Commission has...

  6. Premium Forecasting of an Insurance Company: Automobile Insurance

    OpenAIRE

    Fouladvand, M. Ebrahim; Darooneh, Amir H.

    2002-01-01

    We present an analytical study of an insurance company. We model the company's performance on a statistical basis and evaluate the predicted annual income of the company in terms of insurance parameters namely the premium, total number of the insured, average loss claims etc. We restrict ourselves to a single insurance class the so-called automobile insurance. We show the existence a crossover premium p_c below which the company is loss-making. Above p_c, we also give detailed statistical ana...

  7. Loyalty marketing in automobile dealerships : case: car dealer X

    OpenAIRE

    Hyyryläinen, Heidi

    2012-01-01

    The purpose of this thesis is to study how customer loyalty is taken into account in automobile dealerships, what loyalty marketing means are used to improve customer loyalty, and what potential new loyalty marketing means can be implemented. The thesis is commissioned by Car dealer X. In the theoretical part, areas covered are customership and loyalty marketing. Customership includes customer satisfaction, customer loyalty, customer value and customer retention. Loyalty marketing contain...

  8. Public health, autonomous automobiles, and the rush to market.

    Science.gov (United States)

    Kelley, Ben

    2017-05-01

    The USA has the worst motor vehicle safety problem among high-income countries and is pressing forward with the development of autonomous automobiles to address it. Government guidance and regulation, still inadequate, will be critical to the safety of the public. The analysis of this public health problem in the USA reveals the key factors that will determine the benefits and risks of autonomous vehicles around the world.

  9. A study of automobile exhaust noise preferences

    Science.gov (United States)

    Haire, Jay B.; Carney, Melinda J.; Cheenne, Dominique J.

    2005-04-01

    A study was conducted to investigate the relationship between preferences in automobile exhaust noise and the demographic factors of a listening jury. Noise samples of four different vehicles were recorded at idle as well as at 3000 RPM, and 1/3 octave sound spectra were acquired simultaneously. The recordings were presented to the jury using headphones and a preference survey was administered. Zwicker loudness was computed for all samples. Demographic factors such as gender, age, current and future vehicle ownership, were correlated to listening preferences, and unforeseen results were found, especially in regards to sport utility vehicles (SUV).

  10. Study on the visibility of an electroluminescent display for automobiles; Jidoshayo EL display no shininsei

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, N; Harada, M; Idogaki, T [Denso Corp., Aichi (Japan)

    1997-10-01

    This report explores the visibility of an Electroluminescent (EL) display for automotive use. Displays for automobiles are exposed to the direct rays of the sun and forced to operate in wide temperature range. Therefore, luminous flux density by the lighting on EL display panel and operating environment temperature must be considered for the visibility evaluation. Sensory evaluation on the visibility and physical measurements such as contrast, chromaticity difference in accordance with the viewing angle change indicate that the visibility of the EL display for automobiles is advantageous over other displays. 6 refs., 11 figs., 1 tab.

  11. High-speed rail with emerging automobiles and aircraft can reduce environmental impacts in California’s future

    International Nuclear Information System (INIS)

    Chester, Mikhail; Horvath, Arpad

    2012-01-01

    Sustainable mobility policy for long-distance transportation services should consider emerging automobiles and aircraft as well as infrastructure and supply chain life-cycle effects in the assessment of new high-speed rail systems. Using the California corridor, future automobiles, high-speed rail and aircraft long-distance travel are evaluated, considering emerging fuel-efficient vehicles, new train designs and the possibility that the region will meet renewable electricity goals. An attributional per passenger-kilometer-traveled life-cycle inventory is first developed including vehicle, infrastructure and energy production components. A consequential life-cycle impact assessment is then established to evaluate existing infrastructure expansion against the construction of a new high-speed rail system. The results show that when using the life-cycle assessment framework, greenhouse gas footprints increase significantly and human health and environmental damage potentials may be dominated by indirect and supply chain components. The environmental payback is most sensitive to the number of automobile trips shifted to high-speed rail, and for greenhouse gases is likely to occur in 20–30 years. A high-speed rail system that is deployed with state-of-the-art trains, electricity that has met renewable goals, and in a configuration that endorses high ridership will provide significant environmental benefits over existing modes. Opportunities exist for reducing the long-distance transportation footprint by incentivizing large automobile trip shifts, meeting clean electricity goals and reducing material production effects. (letter)

  12. Automobile exhausts as a source for the environmental pollution by polychloro-dibenzodioxins and -dibenzofurans

    International Nuclear Information System (INIS)

    Ballschmiter, K.; Bacher, R.; Riehle, U.; Swerev, M.

    1990-01-01

    This research project was focussed on the analysis of polyhalogenated dibenzodioxins (''dioxins'') and dibenzofurans (''furans'') emitted through automobile exhausts (halogen = chlorine or bromine). High-resolution selective capillary gas chromatography coupled with mass-selective detection was used. The two compound groups show basic differences in pattern and concentrations for traffic-related samples. In the ''dioxin''-series the higher-chlorinated dibenzodioxins (increasing from Cl 4 to Cl 8 ) are preferentially found, in contrast to the ''furane'', present in higher amounts, for which the lower-halogenated dibenzofurans are more important (decreasing from Cl 1 to Cl 6 and from Br 1 to Br 4 ). The distribution of the dioxin- and furan isomers produced corresponds closely to the so-called ''2,6-type'' pattern which is due to a retarded oxidation and/or a stabilization of phenoxy-intermediates containing the 2,6- or 2,4,6-substitution pattern. To what extent a particular dioxin/furan immission is due to automobile-related emissions can, in the light of the present results, be estimated only by taking several factors into account; source remoteness, the predominance of brominated or partly brominated dibenzofurans over the chlorinated congeners, the presence of other, also halogenated, polycyclic aromatics related to the automobile combustion engine. Areas close to traffic are primarily or completely influenced by the ''dioxin''-emissions of automobiles. For the calculation of the toxic equivalents (TE) for traffic-related emissions, the most important of the ''2,3,7,8''-substituted congeners are the furans 2,3,7,8-Cl 4 DF (F 83) and 2,3,4,7,8-Cl 5 DF (F 114) as well as the dioxins 1,2,3,4,6,7,8-Cl 7 DD (D 73) and octachlorodibenzodioxin (D-75). (orig.) [de

  13. Optimization of a parity of brake forces of automobiles in view of a bias of road

    International Nuclear Information System (INIS)

    Davlatshoev, R.A.; Tursunov, A.A.

    2006-01-01

    In clause it is shown a method optimization of brake of forces in view of a bias road it is established, that in mountain conditions of loss of coupling weight of automobiles than 2-3 times concerning flat conditions therma are more. The degree of use of coupling weight in result use of a regulator of brake forces very much increases also efficiency of brake systems such a kind of automobiles is provided with definition of optimum factor of coupling at which value of loss of coupling weight is provided minimal

  14. The Swiss automobile industry - Situation, structure, trends, challenges and chances; Automobilindustrie Schweiz. Branchenanalyse 2008

    Energy Technology Data Exchange (ETDEWEB)

    Schulze, A.

    2008-07-01

    This paper presented at the Swiss 2008 research conference on traffic takes a look at the situation of the Swiss automobile industry in 2008. The results of the study are presented and include figures on the automobile industry, its history, structure, turn-over, employment and its position from the international point of view. Research and development in the sector, investments and challenges faced are discussed. The products and services offered are looked at and the relevant strategies examined. The sector's competitive environment and possibilities for growth are looked at and the advantages offered by strategic partnerships and geographical location are noted. Finally, interviews with important actors in the business are presented.

  15. Efficient using of automobile transport for the deep open-pit mines

    OpenAIRE

    Dastan MAHAMBETOV; Bayan RAKISHEV; Galymzhan SAMENOV; Aleksander SŁADKOWSKI

    2013-01-01

    In the paper the method is proposed of substantiation of the major parameters for zones of effective use of automobile transport of different load-carrying capacity by open cast development of the deep deposits. An efficient ratio is determined between the mining and transport equipment by zone-to -zone use.

  16. On the contribution of polycyclic aromatic hydrocarbons to the carcinogenic impact of automobile exhaust condensate evaluated by local application onto mouse skin.

    Science.gov (United States)

    Grimmer, G; Brune, H; Deutsch-Wenzel, R; Naujack, K W; Misfeld, J; Timm, J

    1983-11-01

    The objective of this investigation was to identify the substances chiefly responsible for the carcinogenicity of automobile exhaust condensate using topical application onto the skin of mice. This was performed by comparing the carcinogenic effect of various fractions with that of an unseparated sample of automobile exhaust condensate, tested in 3 different doses. The probit and Weibull analysis of the result shows: (a) The condensate, emitted from a gasoline-driven automobile provokes local tumors after long-term application to the dorsal skin of mice. The tumor incidence demonstrates a clear cut dose-response relationship. (b) The fraction of polycyclic aromatic hydrocarbons (PAH) containing more than 3 rings accounts for about 84-91% of the total carcinogenicity of automobile exhaust condensate. This fraction represents only about 3.5% by wt of the condensate. (c) The content of benzo[a]pyrene (BaP) (0.414 mg/g) accounts for 6-7.6% of the total carcinogenicity of automobile exhaust condensate, 15 selected PAHs for about 41%. (d) Regarding the minor effect of the PAH-free fraction (about 83% by wt), no hints for a cocarcinogenic activity were observed.

  17. Dynamic interaction between markets for leasing and selling automobiles

    OpenAIRE

    Andrikopoulos, Athanasios; Markellos, Raphael N.

    2015-01-01

    We develop a model of dynamic interactions between price variations in leasing and selling markets for automobiles. Our framework assumes a differential game between multiple Bertrand-type competing firms which offer differentiated products to forward-looking agents. Empirical analysis of our model using monthly US data from 2002 to 2011 shows that variations in selling (cash) market prices lead rapidly dissipating changes of leasing market prices in the opposite direction. We discuss the pra...

  18. Direct strain energy harvesting in automobile tires using piezoelectric PZT-polymer composites

    NARCIS (Netherlands)

    Ende, D.A. van den; Wiel, H.J. van de; Groen, W.A.; Zwaag, S. van der

    2012-01-01

    Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

  19. Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites

    NARCIS (Netherlands)

    Van den Ende, D.A.; Van de Wiel, H.J.; Groen, W.A.; Van der Zwaag, S.

    2011-01-01

    Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical

  20. Oil prices, SUVs, and Iraq. An investigation of automobile manufacturer oil price sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, Ken [United States Navy (United States); Schnusenberg, Oliver [Department of Accounting and Finance, Coggin College of Business, The University of North Florida, 1 UNF Drive, Jacksonville, FL 32224 (United States)

    2009-05-15

    There has been much speculation about the recent upsurge in crude oil prices and the effect it will have on the economy and business. The objective of this paper is to investigate the relationship between oil prices and stock prices of automobile manufacturers. We add an oil price factor, measured alternatively by the excess change in WTI crude oil prices or the excess return on an energy ETF, to the Fama-French three-factor model over the period March 20, 2001 to September 30, 2008. Our dependent variable is the excess return on a price-weighted index of automobile manufacturers. Results indicate that oil prices add value to the pricing model, particularly for manufacturers specializing in SUVs and for a subperiod following the Iraq invasion on March 19, 2003. (author)

  1. Investigating performance of microchannel evaporators for automobile air conditioning with different port structures

    Directory of Open Access Journals (Sweden)

    Guoliang Zhou

    2017-08-01

    Full Text Available Microchannel evaporator has been widely applied in automobile air conditioning, while it faces the problem of refrigerant maldistribution which deteriorates the thermal performance of evaporator. In this study, the performances of microchannel evaporators with different port structures are experimentally investigated for purpose of reducing evaporator pressure drop. Four evaporator samples with different port number and hydraulic diameter are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant R-134A at a real automobile air conditioning. The results on the variations of the evaporator pressure drop and evaporator surface temperature distribution are presented and analyzed. By studying the performance of an evaporator, seeking proper port structure is an approach to reduce refrigerant pressure drop as well as improve refrigerant distribution.

  2. Integration of Bass Enhancement and Active Noise Control System in Automobile Cabin

    Directory of Open Access Journals (Sweden)

    Liang Wang

    2008-01-01

    Full Text Available With the advancement of digital signal processing technologies, consumers are more concerned with the quality of multimedia entertainment in automobiles. In order to meet this demand, an audio enhancement system is needed to improve bass reproduction and cancel engine noise in the cabins. This paper presents an integrated active noise control system that is based on frequency-sampling filters to track and extract the bass information from the audio signal, and a multifrequency active noise equalizer to tune the low-frequency engine harmonics to enhance the bass reproduction. In the noise cancellation mode, a maximum of 3 dB bass enhancement can be achieved with significant noise suppression, while higher bass enhancement can be achieved in the bass enhance mode. The results show that the proposed system is effective for solving both the bass audio reproduction and the noise control problems in automobile cabins.

  3. The Effect of the Arab Boycott on Israel : The Automobile Market

    NARCIS (Netherlands)

    Fershtman, C.; Gandal, N.

    1996-01-01

    Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel.This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market.In this paper, we examine the

  4. Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

    OpenAIRE

    Sunil Luthra; Vinod Kumar; Sanjay Kumar; Abid Haleem

    2011-01-01

    Purpose: Green Supply Chain Management (GSCM) has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have ident...

  5. Automobile diesel exhaust particles induce lipid droplet formation in macrophages in vitro

    DEFF Research Database (Denmark)

    Cao, Yi; Jantzen, Kim; Gouveia, Ana Cecilia Damiao

    2015-01-01

    Exposure to diesel exhaust particles (DEP) has been associated with adverse cardiopulmonary health effects, which may be related to dysregulation of lipid metabolism and formation of macrophage foam cells. In this study, THP-1 derived macrophages were exposed to an automobile generated DEP (A...

  6. Information, complexity and efficiency: The automobile model

    Energy Technology Data Exchange (ETDEWEB)

    Allenby, B. [Lucent Technologies (United States)]|[Lawrence Livermore National Lab., CA (United States)

    1996-08-08

    The new, rapidly evolving field of industrial ecology - the objective, multidisciplinary study of industrial and economic systems and their linkages with fundamental natural systems - provides strong ground for believing that a more environmentally and economically efficient economy will be more information intensive and complex. Information and intellectual capital will be substituted for the more traditional inputs of materials and energy in producing a desirable, yet sustainable, quality of life. While at this point this remains a strong hypothesis, the evolution of the automobile industry can be used to illustrate how such substitution may, in fact, already be occurring in an environmentally and economically critical sector.

  7. V-TECS Guide for Automobile Air Conditioning and Electrical System Technician.

    Science.gov (United States)

    Meyer, Calvin F.; Benson, Robert T.

    This curriculum guide provides an outline for an eight-unit course to train automobile air conditioning and electrical system technicians. Each unit focuses on a duty that is composed of a number of performance objectives. For each objective, these materials are provided: a task, a standard of performance of task, source of standard, conditions…

  8. VISUALIZATION OF MEMS STRUCTURES FOR EDUCATION OF AUTOMOBILE MICROSYSTEMS

    Directory of Open Access Journals (Sweden)

    Slavomír KARDOŠ

    2017-09-01

    Full Text Available The work is aimed at visualization of working principles of microelectromechanical sensors which are used in automobile electronic systems. Attention is paid to accelerometric, inclinometric, pressure and MAF devices. These are used in systems for stability control, passive and active safety as well as comfort management. The visualizations were realized using modern animation techniques initiated by the creation of virtual materials, 2D and 3D objects, through scene exposure, pending their animation and final cutting.

  9. Perspectives of Biogas Conversion into Bio-CNG for Automobile Fuel in Bangladesh

    Directory of Open Access Journals (Sweden)

    M. S. Shah

    2017-01-01

    Full Text Available The need for liquid and gaseous fuel for transportation application is growing very fast. This high consumption trend causes swift exhaustion of fossil fuel reserve as well as severe environment pollution. Biogas can be converted into various renewable automobile fuels such as bio-CNG, syngas, gasoline, and liquefied biogas. However, bio-CNG, a compressed biogas with high methane content, can be a promising candidate as vehicle fuel in replacement of conventional fuel to resolve this problem. This paper presents an overview of available liquid and gaseous fuel commonly used as transportation fuel in Bangladesh. The paper also illustrates the potential of bio-CNG conversion from biogas in Bangladesh. It is estimated that, in the fiscal year 2012-2013, the country had about 7.6775 billion m3 biogas potential equivalent to 5.088 billion m3 of bio-CNG. Bio-CNG is competitive to the conventional automobile fuels in terms of its properties, economy, and emission.

  10. Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

    Directory of Open Access Journals (Sweden)

    Che-Pin Chen

    2018-04-01

    Full Text Available This research developed a novel proportional pressure control valve for an automobile hydraulic braking actuator. It also analyzed and simulated solenoid force of the control valves, and the pressure relief capability test of electromagnetic thrust with the proportional valve body. Considering the high controllability and ease of production, the driver of this proportional valve was designed with a small volume and powerful solenoid force to control braking pressure and flow. Since the proportional valve can have closed-loop control, the proportional valve can replace a conventional solenoid valve in current brake actuators. With the proportional valve controlling braking and pressure relief mode, it can narrow the space of hydraulic braking actuator, and precisely control braking force to achieve safety objectives. Finally, the proposed novel proportional pressure control valve of an automobile hydraulic braking actuator was implemented and verified experimentally.

  11. Addressing Climate Change at the State and Local Level: Using Land Use Controls to Reduce Automobile Emissions

    Directory of Open Access Journals (Sweden)

    Rachel Medina

    2010-06-01

    Full Text Available Automobiles are a major source of CO2 emissions. Because there is no immediate technological fix to reduce these emissions, the most promising current strategy is to promote less automobile use. In the United States, this is difficult because federal programs such as the interstate highway system and local land use planning and regulation have encouraged suburban sprawl. In 2006, the state of California passed legislation to roll back greenhouse emissions to 1990 levels by 2020. This legislation did not link the roll back target with land use policies. However, NGOs and the state Attorney General used the state’s pre-existing environmental impact assessment act to sue a large county east of Los Angeles alleging that its revised land use plan was inconsistent with the 2006 legislation. The state and the county settled the suit after the county agreed to new greenhouse gas mitigation duties, and in 2008 California passed additional legislation to implement its 2006 statute. Communities are strongly encouraged to adopt compact, transit-oriented development strategies to limit automobile use. The new legislation gives the attorney general and NGOs additional legal authority to challenge local land use plans and regulatory decisions which fail to adopt these strategies. California’s important experiment has lessons for all urban areas struggling to reduce automobile CO2 emissions. It suggests that local land use controls can be added to the list of workable greenhouse gas mitigation strategies.

  12. Success of Saturn: A Case Study of the Saturn Automobile

    Science.gov (United States)

    1993-04-01

    speed in production with nearly 20,000 cars per month coming off the assembly line.133 MARKETING THE PRODUCT ADVERTISING STRATEGY Saturn’s approach to...Satisfaction Index.𔄁 5 In the Sales Satisfaction category Saturn finished sixth behind Lexus, Cadillac, Infiniti, Lincoln and Mercedes Benz , all...quality, inexpensive, fuel efficient automobiles. They put their cars on the market in the U.S. and Americans bought Japanese instead of expensive

  13. The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

    Directory of Open Access Journals (Sweden)

    linhua Pang

    2015-01-01

    Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

  14. In-house Integration Model in the Indian Automobile Industry

    OpenAIRE

    Tachiki, Dennis S.

    2012-01-01

     Since the mid―1980s, Indian automobile companies have been upgrading their technological knowhow to competitively respond to an increasing demand for higher value-added components from domestic and global assemblers. According to the Automotive Component Manufacturers Association of India (ACMA), the auto component market in India should grow at a CARG (compounded annual growth rate) of 11.7 per cent between 2011 and 2015, and the export market at a robust CARG of 18 per cent between 2011 a...

  15. An efficiency analysis of modern and perspective methods and facilities to reduce of the automobile transport exhaust gases

    Directory of Open Access Journals (Sweden)

    Володимир Петрович Юдін

    2015-09-01

    Full Text Available The article studies the degree of atmosphere pollution with automobile transport exhaust gases, the evolution of their rating in the European Union, and the reasons why Ukrainian automobile transport exhaust gases lag behind in meeting emission standards. Constructive, organizational, and regulating techniques aimed at reducing the amount of exhaust gases are analyzed; non-standard propositions concerning cooperation of motor vehicle owners and regulatory authorities are offered; the examples of successful practices employed in Zaporizhia region are given

  16. How did the Global Financial Crisis Influence the Automobile Industry: Comparison between the US and Japanese Auto Industry

    OpenAIRE

    SUN, YAN

    2013-01-01

    The 2008 global financial crisis was the worst one in seventy-five years and had great negative impact on the economy worldwide. Automobile industry, the pillar to the economic development, was hit most by the recession among the sectors. The purpose of this study is to analyze the financial crisis impacts on the automobile industry and find out strategies to decrease the occurrence rate and the loss if a similar crisis occurs. The study, firstly, describes the impact of financial crisis...

  17. Automobiles and global warming: Alternative fuels and other options for carbon dioxide emissions reduction

    International Nuclear Information System (INIS)

    Sagar, A.D.

    1995-01-01

    Automobiles are a source of considerable pollution at the global level, including a significant fraction of the total greenhouse gas emissions. Alternative fuels have received some attention as potential options to curtail the carbon dioxide emissions from motor vehicles. This article discusses the feasibility and desirability (from a technical as well as a broader environmental perspective) of the large-scale production and use of alternative fuels as a strategy to mitigate automotive carbon dioxide emissions. Other options such as improving vehicle efficiency and switching to more efficient modes of passenger transportation are also discussed. These latter options offer an effective and immediate way to tackle the greenhouse and other pollutant emission from automobiles, especially as the limitations of currently available alternative fuels and the technological and other constraints for potential future alternatives are revealed

  18. Measuring the environmental impacts and sustainability of automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Lave, L B; Cobas Flores, E; McMichael, F C; Hendrickson, C T; Horvath, A; Joshi, S [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    1996-11-01

    In the paper the following topics are discussed: - the need for public education and involvement in the decision process, - the difficulty of defining sustainability, - the occasional difference between the goals of sustainability and environmental quality, - the need for life cycle analysis to analyze the sustainability and environmental quality implications of a product, process, or material. The importance of environmental input-output analysis is stressed. This new tool can provide the life cycle information cheaply, quickly, and with much less uncertainty. Examples are presented for making an automobile, a seat out of plastic or aluminium, and an electric vehicle. (author) 4 tabs., refs.

  19. Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209).

    Science.gov (United States)

    Lagalante, Anthony F; Shedden, Courtney S; Greenbacker, Peter W

    2011-07-01

    The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g⁻¹. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population. Copyright © 2011 Elsevier Ltd. All rights reserved.

  20. Estimation of exposed radiation dose in radiography of the chest. Mainly on the dose at health examination on automobiles

    International Nuclear Information System (INIS)

    Suzuki, Shoichi; Oda, Akiko; Ohkura, Masaki

    1998-01-01

    The exposure doses in radiography and photofluorography of the chest at health examination on automobiles were estimated and compared with those using other hospital equipments. The tube voltage, effective energy and half value layer under ordinary conditions for radiography and fluorography were measured by KYOKKO model 100 X-ray analyzer and output pulse shape was confirmed by the fluorometer (TOREKEY-1001 C). The dose at the body surface was measured by the ionization chambers (VICTOREEN RADCON 500 and 30-330) which had been equipped in the WAC chest phantom (JIS Z 4915, Kyoto Kagaku). Nine automobiles of 3 facilities were used, of which X-ray generating apparatuses of either condenser or inverter type were manufactured by Hitachi (5 machines), Toshiba (1) and Shimadzu (3). The examined apparatuses not for the automobile were Toshiba-20 and Hitachi SIRIUS-100 portable ones and Hitachi DH-1520 TM high-voltage one. The effective energy was found dependent on the tube voltage (100-130 kV) and X-ray generating system (35.1-54.37 keV in the condenser type and 41.1-43.9 keV in the inverter type). Pulse shape analysis revealed that the pulse height and area under the pulse height-time curve were larger in the inverter system. The mean doses in photofluorography and radiography on automobiles were 0.525 and 0.297 mGy, respectively. The mean dose of 0.61 mGy in radiography at home with the portable apparatus was the highest even when compared with that of 0.525 mGy for fluorography on the automobile. Thus, the inverter system on the car can guarantee the level of 0.4 mGy defined by IAEA guideline (Safety series No. 115, 1996). (K.H.)

  1. Life cycle models of conventional and alternative-fueled automobiles

    Science.gov (United States)

    Maclean, Heather Louise

    This thesis reports life cycle inventories of internal combustion engine automobiles with feasible near term fuel/engine combinations. These combinations include unleaded gasoline, California Phase 2 Reformulated Gasoline, alcohol and gasoline blends (85 percent methanol or ethanol combined with 15 percent gasoline), and compressed natural gas in spark ignition direct and indirect injection engines. Additionally, I consider neat methanol and neat ethanol in spark ignition direct injection engines and diesel fuel in compression ignition direct and indirect injection engines. I investigate the potential of the above options to have a lower environmental impact than conventional gasoline-fueled automobiles, while still retaining comparable pricing and consumer benefits. More broadly, the objective is to assess whether the use of any of the alternative systems will help to lead to the goal of a more sustainable personal transportation system. The principal tool is the Economic Input-Output Life Cycle Analysis model which includes inventories of economic data, environmental discharges, and resource use. I develop a life cycle assessment framework to assemble the array of data generated by the model into three aggregate assessment parameters; economics, externalities, and vehicle attributes. The first step is to develop a set of 'comparable cars' with the alternative fuel/engine combinations, based on characteristics of a conventional 1998 gasoline-fueled Ford Taurus sedan, the baseline vehicle for the analyses. I calculate the assessment parameters assuming that these comparable cars can attain the potential thermal efficiencies estimated by experts for each fuel/engine combination. To a first approximation, there are no significant differences in the assessment parameters for the vehicle manufacture, service, fixed costs, and the end-of-life for any of the options. However, there are differences in the vehicle operation life cycle components and the state of technology

  2. Biomonitoring of N-ethyl-2-pyrrolidone in automobile varnishers.

    Science.gov (United States)

    Koslitz, Stephan; Meier, Swetlana; Schindler, Birgit Karin; Weiss, Tobias; Koch, Holger Martin; Brüning, Thomas; Käfferlein, Heiko Udo

    2014-12-01

    N-alkyl-2-pyrrolidones are important organic solvents for varnishes in industry. This study investigates exposure to N-ethyl-2-pyrrolidone (NEP) in varnishing of hard plastic components in an automobile plant. Two specific biomarkers of exposure, 5-hydroxy-N-ethyl-2-pyrrolidone (5-HNEP) and 2-hydroxy-N-ethylsuccinimide (2-HESI), were analyzed in urine samples of 14 workers. For this purpose, pre-shift, post-shift and next day pre-shift urine samples were collected midweek. Twelve workers performed regular work tasks (loading, wiping and packing), whereas two workers performed special work tasks including cleaning the sprayer system with organic solvents containing N-alkyl-2-pyrrolidones. Spot urine samples of nine non-exposed persons of the same plant served as controls. Median post-shift urinary levels of workers with regular work tasks (5-HNEP: 0.15 mg/L; 2-HESI: 0.19 mg/L) were ∼5-fold higher compared to the controls (0.03 mg/L each). Continuously increasing metabolite levels, from pre-shift via post-shift to pre-shift samples of the following day, were observed in particular for the two workers with the special working tasks. Maximum levels were 31.01 mg/L (5-HNEP) and 8.45 mg/L (2-HESI). No clear trend was evident for workers with regular working tasks. In summary, we were able to show that workers can be exposed to NEP during varnishing tasks in the automobile industry. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  3. Dissolution kinetics of Pd and Pt from automobile catalysts by naturally occurring complexing agents

    Czech Academy of Sciences Publication Activity Database

    Šebek, O.; Mihaljevič, M.; Strnad, L.; Ettler, V.; Ježek, J.; Štědrý, R.; Drahota, P.; Ackerman, Lukáš; Adamec, V.

    2011-01-01

    Roč. 198, December (2011), s. 331-339 ISSN 0304-3894 Institutional research plan: CEZ:AV0Z30130516 Keywords : automobile catalyst * Platinum group elements * mobilisation * leaching * kinetic Subject RIV: DD - Geochemistry Impact factor: 4.173, year: 2011

  4. Ratio analysis and Piotroski scoring system in the automobile industry in Croatia

    Directory of Open Access Journals (Sweden)

    Morana Mesarić

    2014-10-01

    Full Text Available To gain insight into operational efficiency, sustainable profitability, the ability to fulfil commitments, use of funds borrowed or investment risk or operational self-sufficiency, it is necessary to conduct analyses of financial statements usually known as ratio analysis. The paper provides analyses of five Croatian general distributors of the automobile industry. Ratios used in the analyses are those used in the Piotroski f-scoring analyses, which are famous for assessing financial capacities of enterprises on the stock exchange market. Based on ratios used in Piotroski scoring systems the assessment of five enterprises, as well as the sector as a whole was carried out. The analysis covers the period 2007-2012. That is the period of the rise, falling and recovery of the automotive industry throughout the world as well as the rise, falling and recession of the whole economy including the automobile market. In general, the sector itself is financially unstable and consequently risk exposed. Results are used for preliminary analyses and prediction of the future financial strength of the auto industry in Croatia.

  5. Creating a One-Stop-Shop for Automobile Solutions in Kolkata, India.

    OpenAIRE

    Kanoria, Shrivardhan

    2009-01-01

    This is a research lead business plan concerning making a one-stop-shop for automobile solutions in Kolkata, India, containing three elements of business. Firstly, it would involve restoration, buying and selling of vintage and classic cars. Secondly, it would contain modern car customisation. Thirdly, it would contain modern car servicing, buying and selling. These would be the core activities, having associates non core businesses as well.

  6. Teamwork in the Automobile Industry Ð An Anglo-German Comparison

    OpenAIRE

    Niels-Erik Wergin

    2003-01-01

    Teamwork in the automotive industry varies significantly from plant to plant. This article compares teamwork in four automobile plants in Germany and Britain, and addresses two questions: (1) Do different models of teamwork fit into a bi-polar model of teamwork, being either innovative or structural conservative? (2) Do current models of teamwork signify a development towards post-fordism, or are they merely part of a neo-fordist rationalisation of production? The following answers are sugges...

  7. Automobile inspection system based on wireless communication

    Science.gov (United States)

    Miao, Changyun; Ye, Chunqing

    2010-07-01

    This paper aims to research the Automobile Inspection System based on Wireless Communication, and suggests an overall design scheme which uses GPS for speed detection and Bluetooth and GPRS for communication. The communication between PDA and PC was realized by means of GPRS and TCP/IP; and the hardware circuit and software for detection terminal were devised by means of JINOU-3264 Bluetooth Module after analyzing the Bluetooth and its communication protocol. According to the results of debugging test, this system accomplished GPRS based data communication and management as well as the real-time detection on auto safety performance parameters in crash test via PC, whereby the need for mobility and reliability was met and the efficiency and level of detection was improved.

  8. Employability and Technical Skill Required to Establish a Small Scale Automobile Workshop

    Science.gov (United States)

    Olaitan, Olawale O.; Ikeh, Joshua O.

    2015-01-01

    The study focused on identifying the employability and technical skills needed to establish small-scale automobile workshop in Nsukka Urban of Enugu State. Five purposes of the study were stated to guide the study. Five research questions were stated and answered in line with the purpose of the study. The population for the study is 1,500…

  9. 75 FR 72965 - Federal Travel Regulation; Removal of Privately Owned Vehicle Rates; Privately Owned Automobile...

    Science.gov (United States)

    2010-11-29

    ... rate based on the type of POV you actually use (privately owned airplane, privately owned automobile... HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E) 0 29. The authority citation for 41...

  10. DETECTION RELEVANCY OF SOME FACTORS INFLUENCING ON AIR POLLUTION FROM AUTOMOBILE AND ROAD COMPLEX

    Directory of Open Access Journals (Sweden)

    Radkevich, M.

    2013-01-01

    Full Text Available The dependence between the pavement evenness and the emissions of air pollutants from automobile – road sector is detected. It is proposed to take the pavement evenness for the assessment criterion of greenhouse and other gases emissions.

  11. Automobile dependence in cities: An international comparison of urban transport and land use patterns with implications for sustainability

    International Nuclear Information System (INIS)

    Kenworthy, J.R.; Laube, F.B.

    1996-01-01

    Cities around the world are subject to increasing levels of environmental impact from dependence on the automobile. In the highly auto-dependent cities of the US and Australia, this is manifested in problems such as urban sprawl and its destruction of prime farming land and natural landscapes, photochemical smog that can be primarily attributed to auto emissions. On top of the more local impacts of the automobile, the global dimension should not be forgotten. Perhaps the two most pressing issues in this regard are the oil problem and the greenhouse problem. A comparison of global cities over the period 1980 to 1990 reveals large differences in automobile dependence with implications for the future sustainability of cities in different countries. This study explores some of the underlying land use, transport, and economic reasons for these different transport patterns. It briefly reviews what the sustainability agenda means for transport and land use patterns in cities and suggests a suite of targets or goals for sustainability by which cities might measure their current directions and plans

  12. Talking about the Automobile Braking System

    Science.gov (United States)

    Xu, Zhiqiang

    2017-12-01

    With the continuous progress of society, the continuous development of the times, people’s living standards continue to improve, people continue to improve the pursuit. With the rapid development of automobile manufacturing, the car will be all over the tens of thousands of households, the increase in car traffic, a direct result of the incidence of traffic accidents. Brake system is the guarantee of the safety of the car, its technical condition is good or bad, directly affect the operational safety and transportation efficiency, so the brake system is absolutely reliable. The requirements of the car on the braking system is to have a certain braking force to ensure reliable work in all cases, light and flexible operation. Normal braking should be good performance, in addition to a foot sensitive, the emergency brake four rounds can not be too long, not partial, not ring.

  13. Drivers of Finished-Goods Inventory in the U.S. Automobile Industry

    OpenAIRE

    Gérard P. Cachon; Marcelo Olivares

    2010-01-01

    Automobile manufacturers in the U.S. supply chain exhibit significant differences in their days of supply of finished vehicles (average inventory divided by average daily sales rate). For example, from 1995 to 2004, Toyota consistently carried approximately 30 fewer days of supply than General Motors. This suggests that Toyota's well-documented advantage in manufacturing efficiency, product design, and upstream supply chain management extends to their finished-goods inventory in their downstr...

  14. Comparison study of multistep forging and injection forging of automobile fasteners

    OpenAIRE

    Chen Senyong; Qin Yi

    2015-01-01

    In order to improve production efficiency, injection forging as a feasible approach was introduced to automobile fasteners production. In the study reported in this paper, two forging approaches, traditional multistep forging and injection forging, were analysed by using a finite element method. Using ABAQUS and DEFORM, some significant factors, namely, forging force, energy consumption, component accuracy and stress distribution in the die, were compared to explore the potential and challeng...

  15. Environmental strategies in the automobile industry; Umweltstrategien in der Automobilbranche

    Energy Technology Data Exchange (ETDEWEB)

    Bratzel, S.; Tellermann, R. [Center of Automotive, FHDW, Bergisch Gladbach (Germany)

    2007-12-15

    An actual market analysis on the environment strategies of the automobile industry concludes that the large companies react preferential with marketing measures to the climatic change debate and do not consequently support innovative environmental technology developments. The study show that the companies BMW, Toyota, and Volkswagen have the best environmental stategies, Daimler, Ford, Honda Porsche, Peugeot, Citroen show fragments of an environmental strategey, Chrysler, General Motors, Fiat, Mitsubishi and Nissan/Renault invest in marketing strategies, but not in environmental strategies.

  16. Amplitude-phase characteristics of regulators of high -speed automobile diesels

    OpenAIRE

    Тырловой, С. И.

    2009-01-01

    The regulator frequency response has been analyzed to work out a strategy for repairing and renewal of fuel equipment used by foreign high-speed automobile diesels. For taking into consideration the heavy gradients of kinetic energy of the regulator elements the Lagrange equation of the second kind that includes the partial derivative of kinetic energy along the axis of motion of a gauge clutch was used.  Such a record, which was not kept for the known models, allowed for considerable clarifi...

  17. Research on embedded automobile collision avoidance system

    Directory of Open Access Journals (Sweden)

    TAO Feng

    2016-08-01

    Full Text Available Taking ARM embedded Linux operating system as the development platform,combined with AVR microcontroller,while optimizing the ranging algorithm and using air ultrasonic transducer,the measurement range of which can be up to 50 meter,this paper designs a high-precision,range far,low price,various models suitable automobile collision avoidance warning system.The system adopts Forlinx OK6410 development board for the master.AVR microcontroller is responsible for taking the data of traveling distance between vehicles,and with the ARM development board via RS232 communication transfers vehicle′s distance and speed information to the ARM development boards.The system uses the established collision avoidance model to get alarm information.Experiments show that the system can accurately send out alarm information within a certain range.It is innovative and practical.

  18. Head-up and head-down displays integration in automobiles

    Science.gov (United States)

    Betancur, J. Alejandro; Osorio-Gómez, Gilberto; Agudelo, J. David

    2014-06-01

    In automotive industry, the dashboard has been ergonomically developed in order to keep the driver focused on the horizon while driving, but the possibility to access external electronic devices constraints the driver to turn away his face, generating dangerous situations in spite of the short periods of time. Therefore, this work explores the integration of Head-Up Displays and Head-Down Displays in automobiles, proposing configurations that give to drivers the facility to driving focused. In this way, some of the main ergonomic comments about those configurations are proposed; and also, some technical comments regarding the implemented arrangements are given.

  19. Prevalence and predictors of home and automobile smoking bans and child environmental tobacco smoke exposure: a cross-sectional study of U.S.- and Mexico-born Hispanic women with young children

    Directory of Open Access Journals (Sweden)

    Kegler Michelle C

    2006-10-01

    Full Text Available Abstract Background Detrimental effects of environmental tobacco smoke (ETS exposure on child health are well documented. Because young children's primary exposure to ETS occurs in homes and automobiles, voluntary smoking restrictions can substantially reduce exposure. We assessed the prevalence of home and automobile smoking bans among U.S.- and Mexico-born Hispanics in the southwestern United States, and examined the influence of mother's country of birth and smoking practices on voluntary smoking bans and on child ETS exposure. Methods U.S.- and Mexico-born Hispanic mothers of children aged 2 through 12 years were systematically sampled from health clinics in Albuquerque, New Mexico. In-person interviews were conducted with 269 mothers (75.4% response rate to obtain information on main study outcomes (complete versus no/partial home and automobile smoking bans; child room and automobile ETS exposure and risk factors (mother's country of birth, maternal and household smoking behaviors. Data were analyzed with chi square tests and logistic regression models. Results Three-fourths (74–77% of U.S.-born and 90–95% of Mexico-born mothers reported complete automobile and home smoking bans. In multivariate analyses, mother's U.S nativity, mother's current smoking, and presence of other adult smokers in the home were associated with significantly increased odds of not having a complete home or automobile smoking ban. Mother's smoking was associated with child ETS exposure both indoors (odds ratio [OR] = 3.31 and in automobiles (OR = 2.97. Children of U.S.-born mothers had increased odds of exposure to ETS indoors (OR = 3.24; 95% confidence interval [CI]: 1.37–7.69, but not in automobiles. Having complete smoking bans was associated with substantially reduced odds of child ETS exposure both indoors (OR = 0.10; 95% CI: 0.04–0.27 and in automobiles (OR = 0.14; 95% CI: 0.05–0.36. Conclusion This study of Hispanic mothers in the southwestern U

  20. [Environmental pollution by products of wear and tear automobile-road complex].

    Science.gov (United States)

    Levanchuk, A V

    2014-01-01

    North-West State Medical University named after I.I. Mechnikov, Saint Petersburg, Russian Federation, 191015. There is supposed the method for the assessment of amounts of pollutants released into the environment during the operational wear of tyre treads, brake system of cars and the road pavement. There are presented results of chemical analysis of residues of combustion. The necessity of control of products of work wear of automobile-road complex has been substantiated.

  1. Environmental and biological monitoring of benzene during self-service automobile refueling.

    OpenAIRE

    Egeghy, P P; Tornero-Velez, R; Rappaport, S M

    2000-01-01

    Although automobile refueling represents the major source of benzene exposure among the nonsmoking public, few data are available regarding such exposures and the associated uptake of benzene. We repeatedly measured benzene exposure and uptake (via benzene in exhaled breath) among 39 self-service customers using self-administered monitoring, a technique rarely used to obtain measurements from the general public (130 sets of measurements were obtained). Benzene exposures averaged 2.9 mg/m(3) (...

  2. ESTIMATED RATE OF FATAL AUTOMOBILE ACCIDENTS ATTRIBUTABLE TO ACUTE SOLVENT EXPOSURE AT LOW INHALED CONCENTRATIONS

    Science.gov (United States)

    Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mecha...

  3. AUTOMATIC CONTROL SYSTEM OF WINTER AUTOMOBILE-ROAD MAINTENANCE

    Directory of Open Access Journals (Sweden)

    I. I. Leonovich

    2008-01-01

    Full Text Available In order to ensure a rational usage of financial and material resources directed on winter automobile-road maintenance in theRepublicofBelarusan automatic control system of winter maintenance is under its development and introduction.  The main purpose of the system is to obtain and use meteorological information on the state of a road network that allows to take necessary organizational and technological solutions ensuring safety and continuity of traffic during winter. This system also presupposes to ensure constant control over the state of roadway covering, expenditure of anti-glazed frost materials at all levels of management.The paper considers main aspects pertaining to introduction of the automatic control system of winter maintenance

  4. An Innovative Approach to Enhancing the Sustainable Development of Japanese Automobile Suppliers

    Directory of Open Access Journals (Sweden)

    Chia-Nan Wang

    2016-04-01

    Full Text Available The Japanese automobile industry has been hit sharply by the economic downturn of recent decades. The rise in costs and decline in sales have led to serious problems in the auto industry. In order to address these issues, most companies engage in downsizing and redesigning production operations. It is crucial to investigate the time wasted by replacing assembly boards occurring in manufacturing lines. Therefore, the aim of this study was to provide an integrated approach, Teoriya Resheniya Izobreatatelskih Zadatch (TRIZ, to providing efficient solutions for the automobile industry. The first step of this methodology is to detail the technical problems using the Function and Attribute Analysis (FAA model. Secondly, a contradiction matrix and the inventive principle were applied to find the solutions. In this study, an auto part supplier named Sumi-Hanel located in Hanoi, Vietnam, was taken as a case study; the empirical results showed that waste time had been reduced to 67%, nearly 8400 square meters was saved, and a 20% cost reduction was achieved by reusing old frames. The research proves that the combination of TRIZ and lean manufacturing successfully increases production performance and reduces waste due to technological advancements.

  5. Research on simulation based material delivery system for an automobile company with multi logistics center

    Science.gov (United States)

    Luo, D.; Guan, Z.; Wang, C.; Yue, L.; Peng, L.

    2017-06-01

    Distribution of different parts to the assembly lines is significant for companies to improve production. Current research investigates the problem of distribution method optimization of a logistics system in a third party logistic company that provide professional services to an automobile manufacturing case company in China. Current research investigates the logistics leveling the material distribution and unloading platform of the automobile logistics enterprise and proposed logistics distribution strategy, material classification method, as well as logistics scheduling. Moreover, the simulation technology Simio is employed on assembly line logistics system which helps to find and validate an optimization distribution scheme through simulation experiments. Experimental results indicate that the proposed scheme can solve the logistic balance and levels the material problem and congestion of the unloading pattern in an efficient way as compared to the original method employed by the case company.

  6. Female identity discourse in automobile advertisements

    Directory of Open Access Journals (Sweden)

    Montserrat López Díaz

    2012-01-01

    Full Text Available The article analyzes the way in which the modern car-advertisement defines the identity of women as potential purchasers – to whom it is designed to get through. The research includes language and iconic instruments by which this type of advertisement aims to create a feminized market of products formerly recognized as traditionally masculine. The identification of the addressee of each publicity material might be subsumed under a set of stereotypes, thus enabling advertisers to get across their message using the code of addressee’s own values. The present paper concentrates on the linguistic specifity of the ads for high-tech goods (automobiles targeting the feminine public and eventually points out their high degree of markedness according to the sex of addressees. Discourse analysis and a closer look at linguistic means appearing in French, Spanish and Polish automotive commercials both reveals a stereotyped woman’s image and shows how they happen to perpetutate it.

  7. Effect of Automobile Travel Time Between Patients' Homes and Ophthalmologists' Offices on Screening for Diabetic Retinopathy.

    Science.gov (United States)

    Macon, Céline; Carrier, Hélène; Janczewski, Aurélie; Verger, Pierre; Casanova, Ludovic

    2018-01-01

    The accessibility of ophthalmologists appears to influence the quality of screening for diabetic retinopathy (DR). The principal objective of this study was to analyze the effect of automobile travel time to the closest ophthalmologist on the time to DR screening. This historical cohort study used reimbursement databases from the principal national health insurance fund. Patients were included if they had been reimbursed at least thrice for oral antidiabetic medications in the 12 months before the study start date. Patients were followed up from January 1, 2008, for 4 years. The expected event was a DR screening by an ocular fundus examination. The automobile travel time to the nearest ophthalmologist was calculated by the distance between communes, estimated by appropriate software. A Kaplan-Meier curve and a multivariate Cox model were used to model the effect of travel time on the time until DR screening. A sensitivity analysis of travel time described the results of the Cox model. At the start of 2008, 6,573 patients living in 328 different municipalities were included. The multivariate model found that patients living 60 min or more away from an ophthalmologist had a lower instantaneous probability of DR screening than those living travel time. Increased automobile travel time for patients with diabetes to the nearest ophthalmologist was associated with a longer time to DR screening.

  8. Optimization of eyesafe avalanche photodiode lidar for automobile safety and autonomous navigation systems

    Science.gov (United States)

    Williams, George M.

    2017-03-01

    Newly emerging accident-reducing, driver-assistance, and autonomous-navigation technology for automobiles is based on real-time three-dimensional mapping and object detection, tracking, and classification using lidar sensors. Yet, the lack of lidar sensors suitable for meeting application requirements appreciably limits practical widespread use of lidar in trucking, public livery, consumer cars, and fleet automobiles. To address this need, a system-engineering perspective to eyesafe lidar-system design for high-level advanced driver-assistance sensor systems and a design trade study including 1.5-μm spot-scanned, line-scanned, and flash-lidar systems are presented. A cost-effective lidar instrument design is then proposed based on high-repetition-rate diode-pumped solid-state lasers and high-gain, low-excess-noise InGaAs avalanche photodiode receivers and focal plane arrays. Using probabilistic receiver-operating-characteristic analysis, derived from measured component performance, a compact lidar system is proposed that is capable of 220 m ranging with 5-cm accuracy, which can be readily scaled to a 360-deg field of regard.

  9. Social Sustainability Issues and Older Adults’ Dependence on Automobiles in Low-Density Environments

    Directory of Open Access Journals (Sweden)

    Hitomi Nakanishi

    2015-06-01

    Full Text Available An implicit assumption underlying government strategies to achieve a more sustainable urban transportation system is that all automobile users will be encouraged or persuaded to use more “green” transportation: public transportation, walking and cycling. Little consideration has been given as to how sustainable transportation policies and programmess might impact on different age groups in society, including those retired or semi-retired, despite the fact that an unprecedented number of older drivers will be on the highways in the next few decades. There is limited literature on the contextual factors behind their continued reliance on automobiles, their actual driving behavior (e.g., route choice and time of day to drive framed within the context of social sustainability. This paper introduces the elements of transportation and social sustainability then conducts a comprehensive international literature review focusing on older drivers, their travel choices and associated social sustainability issues. It describes a case study, low-density city and presents empirical evidence, from two surveys conducted in Canberra, Australia. The paper concludes with future research directions that address these issues associated with sustainable transportation.

  10. Automobiles and environment - also an economic problem. Kraftfahrzeug und Umwelt - auch ein oekonomisches Problem

    Energy Technology Data Exchange (ETDEWEB)

    Mager, N

    1981-01-01

    The proliferation of cars since the early 60's and the resulting increasing spatial mobility have contributed to a considerable rise of wealth in economies based on the division of labour, it also had an influence on the creation of new or extension of existing areas of liberty. These undisputably positive effects are of the widerspread private use of cars are correlated with harmful effects on our environment. In some areas they have increased so much as to necessitate when more intensive efforts are in order to reduce pollution. The present thesis aims at describing and discussing the economic problems connected with exhaust gas control. A comprehensive economic analysis of the enviromental damages caused by automobiles and of the corresponding counterstrategies of ecologic policy must by based on the state of pollution existing in reality. The thesis therefore starts with a brief survey on the effective pollution caused by road traffic and automobiles in the Federal Republic of Germany.

  11. 基于微博的汽车品牌传播策略研究%Strategy Researchon Automobile Brand Advertising Based on Weibo

    Institute of Scientific and Technical Information of China (English)

    辛晖

    2015-01-01

    It has been notice by automobile enterprises gradually that traditional sales mode can no longer adapt to the com-petition in the automobile market,car market has transformed from seller's market to buyer's market.With the advent of the era of network, the competition of automobile market,to a great extent,is the competition of network marketing.UsingWeibo as a new channel for automobile brand advertising is aneffective brand communication strategy.%汽车企业逐渐认识到传统的销售模式已经不再适应激烈的汽车市场竞争,汽车市场由卖方市场向买方市场转化。随着网络时代的到来,汽车市场的竞争在很大程度上体现为网络营销的竞争,以品牌为核心的营销时代。以微博作为汽车品牌传播新渠道,是汽车品牌有效传播的营销策略。

  12. International Trade in Intermediate Inputs: The Case of the Automobile Industry

    OpenAIRE

    Markus Diehl

    2001-01-01

    International trade statistics and input-output tables are analyzed in order to test the hypothesis that international production networks have become more relevant. The share of imported inputs in the gross output value of the motor vehicle industry has grown significantly during the last two decades. Moreover, some low-income countries have become strong exporters of automobile parts, but this trade is mainly regional rather than global. Detailed results are presented in case studies on fou...

  13. Environmental Effects of Driving Automobiles in the University of Malaya Campus: A Pilot Study

    Directory of Open Access Journals (Sweden)

    S.Y. Kong

    2009-12-01

    Full Text Available With the increase of human population there has been an evident increase in per capita automobile use and ownership, significantly to a point that almost every urban university campus faces serious challenges from the heavy traffic movement as well as the associated parking shortages. Multiple factors, including lack of land for new parking lots, high cost of building parking structures and the desire to preserve the air quality and campus green spaces are leading many educational institutions towards a new vision based upon expanded transit access, better bicycle and pedestrian facilities and financial incentives for students and staff to drive less. (Toor and Havlick, 2004 This is in stark contrast to the traditional approach to campus transportation planning of the University of Malaya (UM, Kuala Lumpur, Malaysia that allows students, staff and visitors to drive in the campus. The objective of this study is to investigate the related issues and environmental impact of allowing automobile driving in the campus. Studies will also be done to analyse the relationship between university campus planning and traffic condition. Air quality and noise pollution data of 3 selected sites in the campus will be recorded. Subsequently, the air pollutant index and noise pollution level will be identified and data analyses will be done on the data samples. Simultaneously, a survey questionnaire will be conducted to gauge the student’s attitude and degree of awareness with air and noise pollution in the campus. This pilot study reveals that the increasing use of automobiles within the campus has a negative impact on local environment and the quality of life in campus

  14. The Effects of Automobile Recalls on the Severity of Accidents

    OpenAIRE

    Hugo Benitez-Silva; Yong-Kyun Bae

    2010-01-01

    The number of automobile recalls in the U.S. has substantially increased over the last two decades, and after a record of over 30 million cars recalled in 2004, in the last few years it has consistently reached between 15 and 17 million, and in 2009 alone 16.4 million cars were recalled. Toyota's recall crisis in 2010 illustrates how recalls can affect a large number of American drivers and the defects connected to them can result in loss of life and serious accidents. However, in spite of th...

  15. A Review of Voiture Minimum. Le Corbusier and the Automobile

    Directory of Open Access Journals (Sweden)

    Christoph Schnoor

    2013-03-01

    Full Text Available Here is a full-on celebration of cars and someone’s addiction to cars. In its midst drives Le Corbusier. The book, Voiture Minimum. Le Corbusier and the Automobile (Cambridge, Mass. and London: MIT Press, 2011, has recently been published by Spanish architect and academic Antonio Amado. What a curious book. It is something between a detective story circling around determining the date of a single drawing (1928 or 1936 and, simultaneously, it is “Everything you always wanted to know about Le Corbusier and cars but were afraid to ask”.

  16. PRODUCT EFFICIENCY IN THE SPANISH AUTOMOBILE MARKET

    Directory of Open Access Journals (Sweden)

    González, Eduardo

    2013-01-01

    Full Text Available This paper evaluates product efficiency in the Spanish automobile market. We use non parametric frontier techniques in order to estimate product efficiency scores for each model. These scores reflect the minimum price for which each car could be sold, given the bundle of tangible features it offers in comparison to the best-buy models. Unlike previous research, we use discounted prices which have been adjusted by car dealerships to meet sale targets. Therefore, we interpret the efficiency scores as indicators of the value of the intangible features of the brand. The results show that Audi, Volvo, Volkswagen and Mercedes offer the greatest intangible value, since they are heavily overpriced in terms of price/product ratios. Conversely, Seat, Kia, Renault and Dacia are the brands that can be taken as referent in terms of price/product ratios.

  17. Trees in urban street canyons and their impact on the dispersion of automobile exhausts

    NARCIS (Netherlands)

    Gromke, C.B.; Ruck, B.

    2007-01-01

    The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon

  18. [Epidemiological features of automobile traumatism in Russia and abroad].

    Science.gov (United States)

    Iakunin, S A

    2007-01-01

    The article presents updated epidemiological information on specific features and causes of high automobile traumatism in Russia and abroad for the last 5 years. The number of road accidents and road accident fatalities now not only present a great social-medical problem in Russia but also a problem of national security as road accident mortality is far ahead of the developed countries and showed no trend to lowering. This threatening situation is caused by out-of-date transport infrastructure, social factors, old cars without modern safety systems, absence of special emergency medical care for road accident victims. The experience of foreign countries on reducing road traumatism is analysed.

  19. A knowledge-based system for controlling automobile traffic

    Science.gov (United States)

    Maravas, Alexander; Stengel, Robert F.

    1994-01-01

    Transportation network capacity variations arising from accidents, roadway maintenance activity, and special events as well as fluctuations in commuters' travel demands complicate traffic management. Artificial intelligence concepts and expert systems can be useful in framing policies for incident detection, congestion anticipation, and optimal traffic management. This paper examines the applicability of intelligent route guidance and control as decision aids for traffic management. Basic requirements for managing traffic are reviewed, concepts for studying traffic flow are introduced, and mathematical models for modeling traffic flow are examined. Measures for quantifying transportation network performance levels are chosen, and surveillance and control strategies are evaluated. It can be concluded that automated decision support holds great promise for aiding the efficient flow of automobile traffic over limited-access roadways, bridges, and tunnels.

  20. The Effect of the Arab Boycott on Israel: The Automobile Market

    OpenAIRE

    Chaim Fershtman; Neil Gandal

    1996-01-01

    Recent progress towards a comprehensive peace in the Middle East has led to a relaxation of the enforcement of the Arab economic boycott of Israel. This in turn has led to the entry of all the major Japanese and Korean automobile manufacturers into the Israeli market. In this paper, we examine the effect of the Arab economic boycott on this market. Using recent advances in estimating discrete-choice models of product differentiation, we estimate that had the boycott continued, the welfare los...

  1. Design of an Automatic Forward and Back Collision Avoidance System for Automobiles

    Directory of Open Access Journals (Sweden)

    Tasneem Sanjana

    2018-01-01

    Full Text Available This paper is the extended reflection of work originally presented in conference of Electrical, Computer and Communication Engineering (ECCE-CUET 2017, entitled “Automated Anti Collision System for Automobiles”. Automated collision avoidance system is a trending technology of science in automobile engineering. The aim of this paper is to design a system which will prevent collision from the front as well as the back for automobiles. This paper gives an overview of secure and smooth journey of car (vehicles as well as the certainty of human life. This system is controlled by microcontroller ATMEGA32. Two Sharp distance sensors are used to detect object within the danger range where one is for front detection and other is for back detection. A crystal oscillator is used to produce the oscillation and generates the clock pulse of the microcontroller. An LCD and a GLCD are used to give information about the safe distance for front and rear respectively, and a buzzer is used as alarm. An actuator is used as automatic brake and inside the actuator there is a motor driver that runs the actuator. For coding “microC PRO for PIC” is used and “Proteus Design Suite Version 8 Software” is used for simulation.

  2. Limits to leapfrogging in energy technologies? Evidence from the Chinese automobile industry

    International Nuclear Information System (INIS)

    Gallagher, Kelly Sims

    2006-01-01

    Limits to leapfrogging in energy technologies? One of the most attractive notions in the field of sustainable energy development is the concept of energy-technology 'leapfrogging'. Leapfrogging through international technology transfer can be especially problematic because often developing countries do not have the technological capabilities to produce or integrate the advanced energy technologies themselves. Until they have acquired the capabilities to produce the advanced technologies themselves, most late-industrializing countries buy their new technologies from industrialized countries, usually through licensing or joint-venture arrangements. Empirical case studies of the three main Sino-US passenger-car joint ventures reveal that until the late 1990s, little energy or environmental leapfrogging occurred in the Chinese automobile industry as the result of the introduction of US automotive technology. An improvement in Chinese capabilities and more stringent Chinese energy and environmental policies are needed to induce energy leapfrogging in the Chinese automobile industry. Foreign firms also have a social responsibility to contribute to China's sustainable industrial development. In order to realize the promise of the leapfrogging, the limits to leapfrogging must be identified and acknowledged so that strategies can be devised to surmount the barriers to the introduction of advanced energy technologies in developing countries

  3. Perception of risk from automobile safety defects.

    Science.gov (United States)

    Slovic, P; MacGregor, D; Kraus, N N

    1987-10-01

    Descriptions of safety engineering defects of the kind that compel automobile manufacturers to initiate a recall campaign were evaluated by individuals on a set of risk characteristic scales that included overall vehicle riskiness, manufacturer's ability to anticipate the defect, importance for vehicle operation, severity of consequences and likelihood of compliance with a recall notice. A factor analysis of the risk characteristics indicated that judgments could be summarized in terms of two composite scales, one representing the uncontrollability of the damage the safety defect might cause and the other representing the foreseeability of the defect by the manufacturer. Motor vehicle defects were found to be highly diverse in terms of the perceived qualities of their risks. Location of individual defects within the factor space was closely associated with perceived riskiness, perceived likelihood of purchasing another car from the same manufacturer, perceived likelihood of compliance with a recall notice, and actual compliance rates.

  4. Optimizing Diamond Structured Automobile Supply Chain Network Towards a Robust Business Continuity Management

    Directory of Open Access Journals (Sweden)

    Abednico Montshiwa

    2016-02-01

    Full Text Available This paper presents an optimized diamond structured automobile supply chain network towards a robust Business Continuity Management model. The model is necessitated by the nature of the automobile supply chain. Companies in tier two are centralized and numerically limited and have to supply multiple tier one companies with goods and services. The challenge with this supply chain structure is the inherent risks in the supply chain. Once supply chain disruption takes place at tier 2 level, the whole supply chain network suffers huge loses. To address this challenge, the paper replaces Risk Analysis with Risk Ranking and it introduces Supply Chain Cooperation (SCC to the traditional Business Continuity Plan (BCP concept. The paper employed three statistical analysis techniques (correlation analysis, regression analysis and Smart PLS 3.0 calculations. In this study, correlation and regression analysis results on risk rankings, SCC and Business Impact Analysis were significant, ascertaining the value of the model. The multivariate data analysis calculations demonstrated that SCC has a positive total significant effect on risk rankings and BCM while BIA has strongest positive effects on all BCP factors. Finally, sensitivity analysis demonstrated that company size plays a role in BCM.

  5. Energy-harvesting potential of automobile suspension

    Science.gov (United States)

    Múčka, Peter

    2016-12-01

    This study is aimed quantify dissipated power in a damper of automobile suspension to predict energy harvesting potential of a passenger car more accurately. Field measurements of power dissipation in a regenerative damper are still rare. The novelty is in using the broad database of real road profiles, a 9 degrees-of-freedom full-car model with real parameters, and a tyre-enveloping contact model. Results were presented as a function of road surface type, velocity and road roughness characterised by International Roughness Index. Results were calculated for 1600 test sections of a total length about 253.5 km. Root mean square of a dissipated power was calculated from 19 to 46 W for all four suspension dampers and velocity 60 km/h and from 24 to 58 W for velocity 90 km/h. Results were compared for a full-car model with a tyre-enveloping road contact, full-car and quarter-car models with a tyre-road point contact. Mean difference among three models in calculated power was a few per cent.

  6. Thermal automobile interior model; Thermisches Pkw-Innenraum-Modell

    Energy Technology Data Exchange (ETDEWEB)

    Flieger, Bjoern; Streblow, Rita; Mueller, Dirk [RWTH Aachen (Germany). E.ON Energieforschungszentrum

    2012-11-01

    The energy demand of climate-control instruments is an increasingly important focus of study in the automobile industry. The ratio of the energy demand for the engine as opposed to that of other car components will greatly change in the future. Especially for electrical vehicles the auxiliary energy use is very critical because of the limited battery capacity. Thus, the aim of this research project is to investigate means of more efficiently using the available energy by maintaining comfort criteria for all passengers. To realize this, a simulation model of a car interior cabin is being developed with which conclusions can be drawn, under the given boundary conditions, about the air circulation and -states as well as about the resulting energy demand to evaluate the efficiency and the thermal comfort. (orig.)

  7. Simulation of absorption refrigeration system for automobile application

    Directory of Open Access Journals (Sweden)

    Ramanathan Anand

    2008-01-01

    Full Text Available An automotive air-conditioning system based on absorption refrigeration cycle has been simulated. This waste heat driven vapor absorption refrigeration system is one alternate to the currently used vapour compression refrigeration system for automotive air-conditioning. Performance analysis of vapor absorption refrigeration system has been done by developing a steady-state simulation model to find the limitation of the proposed system. The water-lithium bromide pair is used as a working mixture for its favorable thermodynamic and transport properties compared to the conventional refrigerants utilized in vapor compression refrigeration applications. The pump power required for the proposed vapor absorption refrigeration system was found lesser than the power required to operate the compressor used in the conventional vapor compression refrigeration system. A possible arrangement of the absorption system for automobile application is proposed.

  8. Automobile Driver Fingerprinting

    Directory of Open Access Journals (Sweden)

    Enev Miro

    2016-01-01

    Full Text Available Today’s automobiles leverage powerful sensors and embedded computers to optimize efficiency, safety, and driver engagement. However the complexity of possible inferences using in-car sensor data is not well understood. While we do not know of attempts by automotive manufacturers or makers of after-market components (like insurance dongles to violate privacy, a key question we ask is: could they (or their collection and later accidental leaks of data violate a driver’s privacy? In the present study, we experimentally investigate the potential to identify individuals using sensor data snippets of their natural driving behavior. More specifically we record the in-vehicle sensor data on the controllerarea- network (CAN of a typical modern vehicle (popular 2009 sedan as each of 15 participants (a performed a series of maneuvers in an isolated parking lot, and (b drove the vehicle in traffic along a defined ~ 50 mile loop through the Seattle metropolitan area. We then split the data into training and testing sets, train an ensemble of classifiers, and evaluate identification accuracy of test data queries by looking at the highest voted candidate when considering all possible one-vs-one comparisons. Our results indicate that, at least among small sets, drivers are indeed distinguishable using only incar sensors. In particular, we find that it is possible to differentiate our 15 drivers with 100% accuracy when training with all of the available sensors using 90% of driving data from each person. Furthermore, it is possible to reach high identification rates using less than 8 minutes of training data. When more training data is available it is possible to reach very high identification using only a single sensor (e.g., the brake pedal. As an extension, we also demonstrate the feasibility of performing driver identification across multiple days of data collection

  9. Automobile Industry Strategic Alliance Partner Selection: The Application of a Hybrid DEA and Grey Theory Model

    Directory of Open Access Journals (Sweden)

    Chia-Nan Wang

    2016-02-01

    Full Text Available Finding the right strategic alliance partner is a critical success factor for many enterprises. Therefore, the purpose of this study is to propose an effective approach based on grey theory and data envelopment analysis (DEA for selecting better partners for alliance. This study used grey forecasting to predict future business performances and used DEA for the partner selection of alliances. This research was implemented with realistic public data in four consecutive financial years (2009–2012 of the world’s 20 biggest automobile enterprises. Nissan Motor Co., Ltd was set to be the target decision making unit (DMU. The empirical results showed that, among 19 candidate DMUs, Renault (DMU10 and Daimler (DMU11 were the two feasible beneficial alliance partners for Nissan. Although this research is specifically applied to the automobile industry, the proposed method could also be applied to other manufacturing industries.

  10. Risk factors for automobile accidents caused by falling asleep while driving in obstructive sleep apnea syndrome.

    Science.gov (United States)

    Arita, Aki; Sasanabe, Ryujiro; Hasegawa, Rika; Nomura, Atsuhiko; Hori, Reiko; Mano, Mamiko; Konishi, Noriyuki; Shiomi, Toshiaki

    2015-12-01

    We examined the risk factors for automobile accidents caused by falling asleep while driving in subjects with obstructive sleep apnea syndrome (OSAS). We asked licensed drivers with history of snoring and excessive daytime sleepiness who had undergone polysomnography (PSG) at the Department of Sleep Medicine/Sleep Disorders Center at Aichi Medical University Hospital to complete the questionnaires on accidents caused by falling asleep while driving. As a subjective measure of sleepiness, we used the Epworth sleepiness scale (ESS). Based on PSG results, 2387 subjects diagnosed with OSAS were divided into three groups according to apnea-hypopnea index (AHI): mild-to-moderate (5 ≤ AHI accidents in the past 5 years due to falling asleep. Our multivariate analysis suggests that scores on the ESS and patient-reported frequency of feeling drowsy while regular driving and working are related to automobile accidents caused by falling asleep while driving.

  11. Assessment of trace metals using lichen transplant from automobile mechanic workshop in Ile-Ife metropolis, Nigeria.

    Science.gov (United States)

    Odiwe, Anthony I; Adesanwo, Adeyemi T J; Olowoyo, Joshua O; Raimi, Idris O

    2014-04-01

    The level of air pollution around the automobile mechanic workshops has been generally overlooked. This study, examined the level of trace metals in automobile mechanic workshops and the suitability of using transplanted lichen thalli of Lepraria incana for measuring air pollution in such areas. Samples of the lichen thalli were transplanted into seven different sites and were attached to the bark of trees at each site. The samples were harvested from the sites after 3-month exposure. Concentrations of Pb, Cu, Cd, Fe, Zn, and S content were determined using an atomic absorption spectrophotometer. Results showed that there was a significant difference in the trace metals concentrations across the sites (p trend in the concentration of these heavy metals suggests that activities in these workshops might become a major source of certain heavy metals in the environment and if the pollution activities persist, it might become worrisome over time.

  12. Advice of the Italian CCTN on the health risk assessment relative to exposure to automobile emissions

    Energy Technology Data Exchange (ETDEWEB)

    Camoni, I [ed.; Istituto Superiore di Sanita` , Rome (Italy). Lab. di Tossicologia Applicata; Mucci, N [ed.; ISPESL, Monteporzio Catone, Roma (Italy). Dip. di Medicina del Lavoro; Foa` , V [ed.; Milan Univ. (Italy). Clinica del lavoro Luigi Devoto

    1998-06-01

    The period 1990-1995 are reported, they concern the health impact of exposure to benzene and polycyclic aromatic hydrocarbons (PAHs), resulting from automobile exhaust products, for Italian general and occupationally exposed populations. The first recommendation takes into consideration the possible long-term effects of the unleaded gasoline, recently introduced in Italy. The latter two recommendations concern the quantitative evaluation of the risk of leukaemia and of the risk of lung cancer from exposure to benzene and PAHs, resulting from automobile exhaust. [Italiano] Sono riportati i pareri espressi dalla Commissione Consultiva Tossicologica Nazionale (CCTN) nel periodo 1990-1995 riguardanti la valutazione del rischio cancerogeno per esposizione a sostanze contenute nelle emissioni autoveicolari. In particolare, viene stimato il rischio aggiuntivo di leucemia per esposizione a benzene e di cancro polmonare per esposizione a idrocarburi policiclici aromatici (IPA), sia per la popolazione generale che per quella professionalmente esposta.

  13. Navigating Without Road Maps: The Early Business of Automobile Route Guide Publishing in the United States

    Science.gov (United States)

    Bauer, John T.

    2018-05-01

    In the United States, automobile route guides were important precursors to the road maps that Americans are familiar with today. Listing turn-by-turn directions between cities, they helped drivers navigate unmarked, local roads. This paper examines the early business of route guide publishing through the Official Automobile Blue Book series of guides. It focuses specifically on the expansion, contraction, and eventual decline of the Blue Book publishing empire and also the work of professional "pathfinders" that formed the company's data-gathering infrastructure. Be- ginning in 1901 with only one volume, the series steadily grew until 1920, when thirteen volumes were required to record thousands of routes throughout the country. Bankruptcy and corporate restructuring in 1921 forced the publishers to condense the guide into a four-volume set in 1922. Competition from emerging sheet maps, along with the nationwide standardization of highway numbers, pushed a switch to an atlas format in 1926. Blue Books, however, could not remain competitive and disappeared after 1937. "Pathfinders" were employed by the publishers and equipped with reliable automobiles. Soon they developed a shorthand notation system for recording field notes and efficiently incorporating them into the development workflow. Although pathfinders did not call themselves cartographers, they were geographical data field collectors and considered their work to be an "art and a science," much the same as modern-day cartographers. The paper concludes with some comments about the place of route guides in the history of American commercial cartography and draws some parallels between "pathfinders" and the digital road mappers of today.

  14. Improving collaboration between large and small-medium enterprises in automobile production

    Science.gov (United States)

    Sung, Soyoung; Kim, Yanghoon; Chang, Hangbae

    2018-01-01

    Inter-organisational collaboration is important for achieving qualitative and quantitative performance improvement in the global competitive environment. In particular, the extent of collaboration between the mother company and its suppliers is important for the profitability and sustainability of a company in the automobile industry, which is carried out using a customisation and order production system. As a result of the empirical analysis in this study, the collaborative information sharing cycle is shortened and the collaborative information sharing scope is widened. Therefore, the level of collaboration is improved by constructing an IT collaboration system.

  15. Comparative Assessment of Blood Lead Levels of Automobile Technicians in Organised and Roadside Garages in Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Abdulsalam Saliu

    2015-01-01

    Full Text Available Occupational exposure to lead is common among automobile technicians and constitutes 0.9% of total global health burden with a majority of cases in developing countries. The aim of this study was to determine and compare the blood lead levels of automobile technicians in roadside and organised garages in Lagos State, Nigeria. This was a comparative cross-sectional study. Data were collected using interviewer-administered questionnaires. Physical examinations were conducted and blood was analysed for lead using atomic spectrophotometery. Statistical analyses were performed to compare the median blood lead levels of each group using the independent sample (Mann-Whitney U test. Seventy-three (40.3% of the organised compared to 59 (34.3% of the roadside groups had high blood lead levels. The organised group had statistically significant higher median blood lead levels of, 66.0 µg/dL than the roadside 43.5 µg/dL (P < 0.05. There was also statistically significant association between high blood lead levels and abnormal discolouration of the mucosa of the mouth in the organised group. Automobile technicians in organised garages in Lagos have higher prevalence of elevated blood lead levels and higher median levels than the roadside group. Preventive strategies against lead exposures should be instituted by the employers and further actions should be taken to minimize exposures, improve work practices, implement engineering controls (e.g., proper ventilation, and ensure the use of personal protective equipment.

  16. Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique: An Indian perspective

    Directory of Open Access Journals (Sweden)

    Sunil Luthra

    2011-07-01

    Full Text Available Purpose: Green Supply Chain Management (GSCM has received growing attention in the last few years. Most of the automobile industries are setting up their own manufacturing plants in competitive Indian market. Due to public awareness, economic, environmental or legislative reasons, the requirement of GSCM has increased.  In this context, this study aims to develop a structural model of the barriers to implement GSCM in Indian automobile industry.Design/methodology/approach: We have identified various barriers and contextual relationships among the identified barriers. Classification of barriers has been carried out based upon dependence and driving power with the help of MICMAC analysis. In addition to this, a structural model of barriers to implement GSCM in Indian automobile industry has also been put forward using Interpretive Structural Modeling (ISM technique. Findings: Eleven numbers of relevant barriers have been identified from literature and subsequent discussions with experts from academia and industry. Out of which, five numbers of barriers have been identified as dependent variables; three number of barriers have been identified as the driver variables and three number of barriers have been identified as the linkage variables. No barrier has been identified as autonomous variable. Four barriers have been identified as top level barriers and one bottom level barrier. Removal of these barriers has also been discussed.Research limitations/implications: A hypothetical model of these barriers has been developed based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation problem. Practical implications: Clear understanding of these barriers will help organizations to prioritize better and manage their resources in an efficient and effective way.Originality/value: Through this paper we contribute to identify the barriers to implement GSCM in Indian automobile industry and to prioritize them

  17. Automotive Manufacturers' Cost/Revenue, Financial and Risk Analysis : Projected Impact of Automobile Manufacturing on the Plastics Industry

    Science.gov (United States)

    1979-08-01

    The report is part of a study to update the historical and projected cost/revenue analysis of the U.S. domestic automobile manufacturers. It includes the evaluation of the historical and projected financial data to assess the corporate financial posi...

  18. Active-flux based motion sensorless vector control of biaxial excitation generator/motor for automobiles (BEGA)

    DEFF Research Database (Denmark)

    Coroban-Schramel, Vasile; Boldea, Ion; Andreescu, Gheorghe-Daniel

    2009-01-01

    This paper proposes a novel, active-flux based, motion-sensorless vector control structure for biaxial excitation generator for automobiles (BEGA) for wide speed range operation. BEGA is a hybrid excited synchronous machine having permanent magnets on q-axis and a dc excitation on daxis. Using th...... electrical degrees in less than 2 ms test time....

  19. "Desverticalização"/"terceirização" e as relações de subcontratação no complexo automobilístico brasileiro Vertical desintegration/outsourcing and the subcontracting relations in the Brazilian automobile industry

    Directory of Open Access Journals (Sweden)

    João Amato Neto

    1994-04-01

    Full Text Available O presente estudo tem por objetivo básico investigar, dentro do quadro de reestruturação da indústria mundial, quais são os principais fatores que têm motivado as grandes empresas a adotarem estratégias de "desintegração vertical", com a contrapartida de "terceirização" e "subcontratação" de pequenas empresas (fornecedoras de peças, componentes, etc.. Busca, ainda, entender este fenômeno a partir das estratégias da grande empresa industrial em busca de maior flexibilidade e tendo em vista o advento do novo paradigma de produção industrial, onde as relações inter-empresas sob a "filosofia" 'just-in-time' e de qualidade assegurada (qualidade total passam a ganhar maior relevância. Inicialmente são apresentados alguns aspectos dessa problemática a nível da indústria automobilística mundial para, posteriormente, analisar-se, a partir da pesquisa de campo, o caso do complexo automobilístico brasileiro.The aim of this study is to investigate, based on the context of the global industry restructuring, the main factors which have induced the process of vertical desintegration of the larger companies in the brazilian automobile industry. It involves the consequent increase of outsourcing process by the same companies. Thirteen case studies are presented (5 automakers and 8 autoparts companies with the purpose of identifying the tendency of these fenomena (vertical desintegration / outsourcing process within the brazilian automobile complex. These case studies provide some evidence which allow us to reach some conclusions, for instance: the relationship between the automakers and the autoparts companies belonging to the first step of the "subcontracting pyramid" has become less conflicting. But the relationship between the autoparts companies ("first step" and their suppliers (second, third,...steps is still based upon the "exit strategy", representing a lot of problems to both sides (e.g. : delay in delivers, high rate of low

  20. Bildgebendes Multispektralsystem zur Serienfarbmessung an goniochromatischen Oberflächenbeschichtungen in der Automobil- und Zulieferindustrie

    OpenAIRE

    Jäger, Stefan

    2006-01-01

    In dieser Arbeit wird ein multispektrales bildgebendes System zur Farbmessung von Metall- und Perleffektlacken in einem industriellen Umfeld vorgestellt. Der Zweck des vorgeschlagenen Systems ist die Serienüberwachung und daraus folgend, die Steuerung von Lackierprozessen in der Automobil- und Zulieferindustrie, um das Qualitätsniveau anzuheben und Kosten zu reduzieren. Ausgehend von der Analyse der messtechnischen Anforderungen und den durch die Prozesstechnik gegebenen Randbedingungen wurde...

  1. Wind power demonstration and siting problems. [for recharging electrically driven automobiles

    Science.gov (United States)

    Bergey, K. H.

    1973-01-01

    Technical and economic feasibility studies on a small windmill to provide overnight charging for an electrically driven car are reported. The auxiliary generator provides power for heating and cooling the vehicle which runs for 25 miles on battery power alone, and for 50 miles with the onboard charger operating. The blades for this windmill have a diameter of 12 feet and are coupled through to a conventional automobile alternator so that they are able to completely recharge car batteries in 8 hours. Optimization of a windmill/storage system requires detailed wind velocity information which permits rational sitting of wind power system stations.

  2. Características estruturais, relacionais e gerenciais na cadeia de suprimentos de um condomínio industrial na indústria automobilística

    OpenAIRE

    Pires,Sílvio Roberto Ignácio; Sacomano Neto,Mário

    2010-01-01

    Nas últimas décadas, a contribuição da indústria automobilística tem sido muito representativa em termos de inovações na gestão da cadeia de suprimentos, tais como aquelas contempladas nos modelos de consórcio modular e de condomínio industrial. Este artigo apresenta os resultados de uma pesquisa envolvendo diferentes configurações na estrutura de relacionamento entre uma montadora de automóveis e alguns de seus fornecedores, em uma cadeia de suprimentos da indústria automobilística que utili...

  3. Visions for the car of the future; Visionen fuer das Automobil der Zukunft

    Energy Technology Data Exchange (ETDEWEB)

    Leschke, H. [DaimlerChrysler AG, Sindelfingen (Germany)

    2000-07-01

    The car is 115 years old. Where is it heading on its journey through time which has - up until now - been more evolutionary than revolutionary? The criterion will be to achieve advantages for our customers, and we must channel all our efforts into doing so. 'Emotional' - and therefore 'irrational' feelings - stand in opposition to this rational criterion. A car must please, otherwise it simply will not sell. And let us not forget the 'brand-specific' aspect of car design, which is perceived in a very emotional way. Our profession - and therefore our professionalism too - must see to it that the laws of aesthetics remain on a comprehensible scale, but must develop further from the point of view of different cultures, their development thus far and a general global rapprochement. Design is allowed to provoke, to intrigue our customers; it must arouse emotions. Both emotion and provocation lead to polarity. On balance: there will be something for everyone, a variety of different concepts and designs as a way of portraying one's own individuality in a motoring medley. The basic prerequisite: we should still find driving a car fun - even in the year 2000. (orig.) [German] Das Automobil ist 115 Jahre alt. Wohin geht seine bisherige, eher evolutionaere als revolutionaere Reise? Kundennutzen wird das Kriterium sein, dem sich all unser Tun stellen muss. Diesem rationalen Kriterium steht das 'Emotionale' und damit eher 'Irrationale' gegenueber. Ein Automobil muss gefallen, sonst wird es nicht gekauft. Vergessen wir nicht das sehr emotional wahrgenommene 'Markenspezifische' Automobil-Design. Unsere Profession, und damit auch unsere Professionalitaet, muessen Sorge tragen, dass die Gesetze der Aesthetik in einem nachvollziehbaren Rahmen bleiben, sich aber unter dem Aspekt der unterschiedlichen Kulturen, deren bisheriger Entwicklung und weltweiten Annaeherung weiterentwickeln muessen. Design darf provozieren

  4. Parking infrastructure: energy, emissions, and automobile life-cycle environmental accounting

    Energy Technology Data Exchange (ETDEWEB)

    Chester, Mikhail; Horvath, Arpad; Madanat, Samer, E-mail: mchester@cal.berkeley.edu, E-mail: horvath@ce.berkeley.edu, E-mail: madanat@ce.berkeley.edu [Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley CA 94720 (United States)

    2010-07-15

    The US parking infrastructure is vast and little is known about its scale and environmental impacts. The few parking space inventories that exist are typically regionalized and no known environmental assessment has been performed to determine the energy and emissions from providing this infrastructure. A better understanding of the scale of US parking is necessary to properly value the total costs of automobile travel. Energy and emissions from constructing and maintaining the parking infrastructure should be considered when assessing the total human health and environmental impacts of vehicle travel. We develop five parking space inventory scenarios and from these estimate the range of infrastructure provided in the US to be between 105 million and 2 billion spaces. Using these estimates, a life-cycle environmental inventory is performed to capture the energy consumption and emissions of greenhouse gases, CO, SO{sub 2}, NO{sub X}, VOC (volatile organic compounds), and PM{sub 10} (PM: particulate matter) from raw material extraction, transport, asphalt and concrete production, and placement (including direct, indirect, and supply chain processes) of space construction and maintenance. The environmental assessment is then evaluated within the life-cycle performance of sedans, SUVs (sports utility vehicles), and pickups. Depending on the scenario and vehicle type, the inclusion of parking within the overall life-cycle inventory increases energy consumption from 3.1 to 4.8 MJ by 0.1-0.3 MJ and greenhouse gas emissions from 230 to 380 g CO{sub 2}e by 6-23 g CO{sub 2}e per passenger kilometer traveled. Life-cycle automobile SO{sub 2} and PM{sub 10} emissions show some of the largest increases, by as much as 24% and 89% from the baseline inventory. The environmental consequences of providing the parking spaces are discussed as well as the uncertainty in allocating paved area between parking and roadways.

  5. The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

    Directory of Open Access Journals (Sweden)

    Chao-Wu Chou

    2015-06-01

    Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

  6. Tungsten carbide and tungsten-molybdenum carbides as automobile exhaust catalysts

    International Nuclear Information System (INIS)

    Leclercq, L.; Daubrege, F.; Gengembre, L.; Leclercq, G.; Prigent, M.

    1987-01-01

    Several catalyst samples of tungsten carbide and W, Mo mixed carbides with different Mo/W atom ratios, have been prepared to test their ability to remove carbon monoxide, nitric oxide and propane from a synthetic exhaust gas simulating automobile emissions. Surface characterization of the catalysts has been performed by X-ray photoelectron spectroscopy (XPS) and selective chemisorption of hydrogen and carbon monoxide. Tungsten carbide exhibits good activity for CO and NO conversion, compared to a standard three-way catalyst based on Pt and Rh. However, this W carbide is ineffective in the oxidation of propane. The Mo,W mixed carbides are markedly different having only a very low activity. 9 refs.; 10 figs.; 5 tabs

  7. Aptitude visuelle à la conduite automobile: exemple des candidats au permis de conduire à Libreville

    Science.gov (United States)

    Souhail, Hassane; Assoumou, Prudence; Birinda, Hilda; Mengome, Emmanuel Mve

    2015-01-01

    L'objectif était d’évaluer l'aptitude visuelle à la conduite automobile des candidats au permis de conduire à Libreville. Il s'agissait d'une étude transversale, descriptive et analytique, qui s'est déroulée à Libreville pendant la période du 4 avril 2012 au 14 juillet 2012 (soit 4 mois et 10 jours). La population d’étude concernait les candidats soumis aux épreuves d'obtention du permis de conduire. Nous avons inclus dans notre travail, les candidats, ayant donné leur consentement par écrit et exclus ceux refusant d'adhérer à l'enquête. Les variables étudiées concernaient l’âge, le sexe, la population d’étude, l'activité professionnelle, l'acuité visuelle de loin et de près, la vision des couleurs, la catégorie du permis de conduire, et l'aptitude visuelle à la conduite automobile. La saisie et l'analyse des données ont été collectées au moyen d'une fiche d'enquête standardisée; après vérification et validation, elles ont été saisies sur le logiciel Excel Windows et analysées sur le logiciel Epi Info version 3.5.1. L’âge moyen des 406 candidats était de 29 ans ± 6,65 ans avec des extrêmes allant de 17 ans à 52 ans. Les hommes représentaient 283 (69,7%) et les femmes 123 (30,3%), soit un ratio de 2,3. Les fonctionnaires étaient retrouvés dans 39,4 % des cas, suivi des élèves-étudiants dans 33,5%. Dans notre population d’étude, 71 sur 406 candidats avaient une baisse de l'acuité visuelle de loin, soit 17,5%. Dans notre série, nous avons retrouvés 34 candidats âgés de 40 ans et plus, et seulement 14 candidats (41,2%) avaient une baisse de l'acuité visuelle de près. La quasi-totalité des patients avaient une vision de couleurs normale (99,5%), cependant 2 candidats avaient une vision de couleurs anormale, soit une prévalence de 0,5%. Dans notre échantillon, 403 (99,3%) sollicitaient un permis de conduire de catégorie léger (perms A, A1, B, F) et 3 (0,7%) sollicitaient un permis de conduire de type

  8. Supply Chain Management in The Brazilian Automobile Industry: Bottlenecks for Steadier Growth

    Directory of Open Access Journals (Sweden)

    W. F. Sorte Junior

    2011-06-01

    Full Text Available Taking the Lean Production System as the reference model, this paper analyses the supply chain management approach and the relationship between private and public sectors in the Brazilian automobile industry. Through a case study conducted from October 2006 to October 2008 in a private owned automaker, two bottlenecks in this Brazilian industrial sector are identified: (1 Emphasis on coordination rather than integration in supply chain management; and (2 Insufficient channels of communication between private and public sectors, resulting in inefficient policies to nurture automakers with low production volume.

  9. Supplier selection in automobile industry: A mixed balanced scorecard–fuzzy AHP approa

    Directory of Open Access Journals (Sweden)

    Masoud Rahiminezhad Galankashi

    2016-03-01

    Full Text Available This study proposed an integrated Balanced Scorecard–Fuzzy Analytic Hierarchical Process (BSC–FAHP model to select suppliers in the automotive industry. In spite of the vast amount of studies on supplier selection, the evaluation and selection of suppliers using the specific measures of the automotive industry are less investigated. In order to fill this gap, this research proposed a new BSC for supplier selection of automobile industry. Measures were gathered using a literature survey and accredited using Nominal Group Technique (NGT. Finally, a fuzzy AHP was used to select the best supplier.

  10. The choice of leasing companies for automobile fleet updating on the basis of hierarchies analysis method

    OpenAIRE

    Dorohov, А.

    2007-01-01

    The basic criteria of leasing companies choice by the transport enterprises for automobile fleet updating such as terms of financing, size of advance, assortment time of existence at the market, have been determined. The determination of the best leasing company according to these parameters on the basis of hierarchies analysis method has been offered.

  11. Role of Multinational Corporations in Automobile Industries: A Comparative Study Between India and Mexico

    Directory of Open Access Journals (Sweden)

    Ganesh Babu Kumaran

    2008-10-01

    Full Text Available Role of Multinational Corporations ( MNC’s in developing countries is not new in the arena of International business and global macroeconomics. One of the most significant economic developments of recent decades is the economic LPG process (Liberalisation, Privatisation and Globalisation is reflected in the rapid growth in international trade and the surge in Foreign Direct Investment (FDI. This process is to a large extent driven by new investments from multinational corporations. A rapidly growing share of MNC’s in India and Mexico in last decade was evident in various sector and in particular to automobile sector. Multinational Corporations are seeking to exploit the vast but also precarious market potentials in these emerging economies. Simultaneously, India and Mexico are increasingly embarking on economic development strategies aimed at attracting MNC’s Foreign Direct Investment as a means to access technology, capital, organizational and marketing know how, etc. This study does comparative analyses on the performance of automobile sector in India and Mexico, mainly in passenger car and Utility vehicles sector. It examines the impact and the role of MNC’s in these economies since 1990’s, with derived empirical quantitative and qualitative data analysis that would illustrate and reinforce some of the contemporary status.

  12. REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

    OpenAIRE

    Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

    2002-01-01

    As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

  13. Research on the Intelligent Control and Simulation of Automobile Cruise System Based on Fuzzy System

    Directory of Open Access Journals (Sweden)

    Xue-wen Chen

    2016-01-01

    Full Text Available In order to improve the active safety driving vehicle and alleviate the intension of driving fatigue, an intelligent control strategy of automobile cruise is put forward based on the throttle or braking pedal combined control adopting the fuzzy control theory. A fuzzy logic controller is presented, which consists of the two input variables, the deviation of the theoretical safe distance and relative distance and the relative velocity between the preceding vehicle and the cruise vehicle, and the single output variable, that is, the throttle opening or the braking pedal travel. Taking the test data of 1.6 L vehicle with auto-transmission as an example, the function on the intelligent cruise control system is simulated adopting MATLAB/Simulink aiming at different working conditions on the city road. The simulation results show that the control strategy possesses integrated capability of automated Stop & Go control, actively following the preceding vehicle on the conditions of keeping the safety distance and the constant velocity cruise. The research results can offer the theory and technology reference for setting dSPACE type and developing the integrated control product of automobile cruise system.

  14. Manganese concentrations in the air of the Montreal (Canada) subway in relation to surface automobile traffic density

    Energy Technology Data Exchange (ETDEWEB)

    Boudia, Nacera; Gareau, Lise; Zayed, Joseph [GRIS Interdisciplinary Health Research Group, University of Montreal (Canada); Halley, Renee [Transport Montreal Society (Canada); Kennedy, Greg [Department of Engineering Physics, Ecole Polytechnique de Montreal, Montreal (Canada); Lambert, Jean [Department of Social and Preventive Medicine, Faculty of Medicine, University of Montreal (Canada)

    2006-07-31

    Methylcyclopentadienyl manganese tricarbonyl (MMT) is an organic derivative of manganese (Mn), used since 1976 in Canadian gasoline as an octane enhancer. Its combustion leads to the emission of Mn particles. Several studies carried out by our research group have established a correlation between atmospheric Mn concentrations and automobile traffic density, suggesting that MMT in gasoline could play a significant role. This study aims to measure Mn concentrations in the air of the underground subway in Montreal (Canada) and to examine the relation with nearby surface automobile traffic density and, by extension, with the use of MMT in gasoline. Three subway stations were chosen for their location in different microenvironments with different traffic densities. Respirable (MnR<5 {mu}m) and total Mn (MnT) were sampled over two weeks, 5 days/week, 12 h/day. For the station located in the lower traffic density area, relatively low levels of MnR and MnT were found, with averages of 0.018 and 0.032 {mu}g/m{sup 3}, respectively. These concentrations are within the range of the background levels in Montreal. For the other two stations, the average concentrations of MnR were twice as high and exceeded the US EPA reference concentration of 0.05 {mu}g/m{sup 3}. Although there may be several sources of Mn from different components of the subway structure and vehicles, no correlation was found between subway traffic and atmospheric Mn in the subway. Since the air in the underground subway is pumped directly from outside without filtration, our findings strongly suggest that the combustion of MMT in automobiles is an important factor. (author)

  15. Cross-Border Labor Organizing in the Garment and Automobile Industries: The Phillips Van-Heusen and Ford Cuautitlan Cases

    Directory of Open Access Journals (Sweden)

    Ralph Armbruster

    2015-08-01

    Full Text Available The globalization of the world economy has created new opportunities for cross-border labor organizing. In this paper I examine two case studies of cross -border labor organizing. One case involves Phillips Van-Hernen (PVH workers in Guatemala City, and the other Ford automobile workers in Cuautitlan, Mexico. The PVH case illustrates the potential for cross-border labor organizing in the highly mobile garment industry. The PVH workers' union and their cross-border allies adopted a "strategic cross-border organizing model" that included consumer and trade pressure, an active international trade secretariat, and several other strategies, to achieve an amazing victory. However, the Ford Cuautitlan case demonstrates that corporatist state-labor relations and internal union conflicts have limited cross-border organizing in the automobile industry. These two case studies and their different outcomes have many important lessons for academics and activists interested in cross-border labor organizing.

  16. Can the periphery achieve core? The case of the automobile components industry in Spain

    OpenAIRE

    Lampón, Jesús F.; Lago-Peñas, Santiago; Cabanelas, Pablo

    2013-01-01

    The paper analyses changes experienced by Spain, as a European Peripheral region, in the spatial concentration of value-added and high-skill activities, and generation of technology in the automobile components industry. The analysis of plants set up (investments) and relocated (divestments) by multinationals (MNEs) between 2001 and 2010 show that Spain is no longer a place for labour-intensive activities and standardized processes using simple technologies in comparison to other peripheral r...

  17. Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

    OpenAIRE

    Silva-Risso, Jorge; Zettelmeyer, Florian; Busse, Meghan R.; Knittel, Christopher Roland

    2016-01-01

    Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

  18. Who is exposed to gas prices? How gasoline prices affect automobile manufacturers and dealerships

    OpenAIRE

    Busse, Meghan R.; Kittel, Christopher R.; Zettelmeyer, Florian

    2012-01-01

    Many consumers are keenly aware of gasoline prices, and consumer responses to gasoline prices have been well studied. In this paper, by contrast, we investigate how gasoline prices affect the automobile industry: manufacturers and dealerships. We estimate how changes in gasoline prices affect equilibrium prices and sales of both new and used vehicles of different fuel economies. We investigate the implications of these effects for individual auto manufacturers, taking into account differences...

  19. Imitating model of the electronic regulator frequencies of rotation of the automobile diesel engine

    OpenAIRE

    Тырловой, С. И.

    2011-01-01

    The imitating model of an frequency electronic regulator of rotation of high-speed diesel engine an automobile diesel engine with the distributive fuel pump of Bosch company is resulted. Is executed simulation transitive modes of a diesel engine with mechanic and electronic regulators. Deterioration influence plungers steams on dinamic and economic indicators of a diesel engine is analysed. Operational indicators of a diesel engine with mechanic and electronic regulators are compared. The obt...

  20. Environmental compatibility of automobiles - instruments for the BMW product development process; Automobil-Umweltvertraeglichkeit - neue Instrumente im BMW-Produktentwicklungsprozess

    Energy Technology Data Exchange (ETDEWEB)

    Franze, H.A.; Neumann, U.; Vornberger, K.; Hoock, R.; Hemberger, R.

    1995-09-01

    The environmental impact of the automobile and its components is of growing importance not only in public debates but also in the complex decision making process regarding future car concepts. To calculate the environmental compatibility of car components BMW had developed various quantifying instruments and a holistic Life-Cycle Analysis (LCA) approach. The development phase significantly affects the entire life-cycle of a product. Suitable design criteria, recycling requirements and in-house standards have therefore been developed and established. They enable the designer to handle the more and more complex conflicts of technical, economic and ecological objectives during the development process with special view to the customer, i.e. the market. (orig.) [Deutsch] Zur nachhaltigen Verbesserung der Umweltvertraeglichkeit von Automobilen und Bauteilen hat BMW quantitative Instrumente entwickelt: Den `Anforderungskatalog Gesamtfahrzeug`, die BMW-Recycling-Norm, die Demontageanalyse von Automobilen und die lebenszyklusbezogene Bauteil-Bilanzierung. Sie sollen es dem Konstrukteur in der Entwicklungsphase praxisgerecht ermoeglichen, verschiedene Bauteilvarianten oekologisch zu bewerten. Nur so koennen die weiter zunehmenden komplexen Zielkonflike in der Automobilentwicklung, die sowohl technisch-wirtschaftlicher als auch oekonomisch-oekologischer und teilweise gesellschaftspolitischer Natur sind, in Zukunft beherrscht und damit den Markt- und Kundenanforderungen gerecht werden. (orig.)

  1. Innovative design method of automobile profile based on Fourier descriptor

    Science.gov (United States)

    Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

    2017-10-01

    Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

  2. A Low-Cost Data Acquisition System for Automobile Dynamics Applications.

    Science.gov (United States)

    González, Alejandro; Olazagoitia, José Luis; Vinolas, Jordi

    2018-01-27

    This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in <80 Hz data acquisition in vehicle dynamics, using low-cost accelerometers. In addition to this, a comparative study is carried out of professional vibration acquisition technologies and low-cost systems, obtaining optimum results for low- and medium-frequency operations with an error of 2.19% on road tests. It is therefore concluded that these technologies are applicable to the automobile industry, thereby allowing the project costs to be reduced and thus facilitating access to this kind of research that requires limited resources.

  3. An empirical and model study on automobile market in Taiwan

    Science.gov (United States)

    Tang, Ji-Ying; Qiu, Rong; Zhou, Yueping; He, Da-Ren

    2006-03-01

    We have done an empirical investigation on automobile market in Taiwan including the development of the possession rate of the companies in the market from 1979 to 2003, the development of the largest possession rate, and so on. A dynamic model for describing the competition between the companies is suggested based on the empirical study. In the model each company is given a long-term competition factor (such as technology, capital and scale) and a short-term competition factor (such as management, service and advertisement). Then the companies play games in order to obtain more possession rate in the market under certain rules. Numerical simulation based on the model display a competition developing process, which qualitatively and quantitatively agree with our empirical investigation results.

  4. From Rail-Oriented to Automobile-Oriented Urban Development and Back. 100 Years of Paradigm Change and Transport Policy in Berlin

    Directory of Open Access Journals (Sweden)

    Friedemann Kunst

    2016-10-01

    Full Text Available Transport and its side effects are major problems in rapidly growing cities. Car traffic dominates these cities and pollutes the environment without being able to sufficiently secure the mobility of the urban population and goods. A paradigm shift in urban and transport policy will be necessary to change this situation. In spite of its different development dynamics, Berlin is an interesting example to discuss development strategies for rapidly growing cities because in the course of more than 100 years, a twofold paradigm shift has occurred in the city both conceptually and practically:  Berlin has shifted from a city dominated by rail traffic  to an automobile-oriented city,  and has then gradually transformed back into a city in which  an intertwined system of public and non-motorized individual means of transport secures the mobility of the urban population. The interdependencies on the conceptual level between urban planning and transport policies as well as on a practical level between urban structures and transport systems can be studied using the example of Berlin. Experiences with the implementation of automobile-oriented planning and the special conditions in the first decade after reunification led to protests, reflection, and a revision of the transport policy. A strategically designed process of integrated planning has brought about a trend reversal, and steered the development of transport in the direction of clearly formulated sustainability-oriented objectives. In this process, the reintegration of transport and spatial planning and a reorganization of institutional structures at the administrative level was of particular importance. Compact, rail-oriented settlement structures like in the metropolitan region of Berlin make it easier to dispense with automobiles than sprawled structures. The residual role that qualitatively improved automobiles will take in the cities of the future will have to be determined by research and

  5. The Historical Evolution and Current Interpretation of the Definition of Essence of the Category of «Competitiveness of Enterprise of the Automobile Industry»

    Directory of Open Access Journals (Sweden)

    Shevchenko Inna Yu.

    2018-01-01

    Full Text Available The article is aimed at researching the historical evolution and a current interpretation of the definition of essence of the category of «competitiveness of enterprise of the automobile industry». Using the monographic analysis, the article reviews the historical evolution of the definition of essence of the category of «competitiveness of enterprise» in the national scientific literature in the period from 2007 to 2016. It has been concluded that the essence of the concept of «competitiveness of enterprise» is actually reduced to the competitiveness of products or operational efficiency. The author’s own definition of the essence of the category of «competitiveness of enterprise of the automobile industry» has been suggested: it has been specified that under the given term be understood «...the dynamic ability of enterprise of the automobile industry to ensure the efficiency of all activities as result of interaction of the internal competitive potential and the external competitive environment factors in accordance with the chosen competitive strategy at a certain stage of the life cycle».

  6. Alternative Antriebe für Automobile: Hybridsysteme, Brennstoffzellen, alternative Energieträger

    Science.gov (United States)

    Stan, Cornel

    Über die Realisierungsmöglichkeiten zukünftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor über Brennstoffzellen bis zu alternativen Energieträgern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualität eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geräusche sind dafür wichtige Merkmale zur Qualitätsbeurteilung. Die Verfügbarkeit und die Speicherfähigkeit vorgesehener Energieträger, die technische Komplexität, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen für die Einführung realisierbarer Konzepte alternativer Antriebe für Automobile stellen.

  7. Recent development of non-oriented electrical steel sheet for automobile electrical devices

    International Nuclear Information System (INIS)

    Oda, Yoshihiko; Kohno, Masaaki; Honda, Atsuhito

    2008-01-01

    This paper describes non-oriented electrical steel sheet for automobile motors and reactors. Electrical steel sheets for energy efficient motors show high magnetic flux density and low iron loss. They are suitable for HEV traction motors and EPS motors. A thin-gauge electrical steel sheet and a gradient Si steel sheet show low iron loss in the high-frequency range. Therefore, the efficiency of high-frequency devices can be greatly improved. Since a 6.5% Si steel sheet possesses low iron loss and zero magnetostriction, it contributes to reduce the core loss and audible noise of high-frequency reactors

  8. The Intergenerational Transmission of Automobile Brand Preferences: Empirical Evidence and Implications for Firm Strategy

    OpenAIRE

    Soren T. Anderson; Ryan Kellogg; Ashley Langer; James M. Sallee

    2013-01-01

    We document a strong correlation in the brand of automobile chosen by parents and their adult children, using data from the Panel Study of Income Dynamics. This correlation could represent transmission of brand preferences across generations, or it could result from correlation in family characteristics that determine brand choice. We present a variety of empirical specifications that lend support to the former interpretation and to a mechanism that relies at least in part on state dependence...

  9. Trees in urban street canyons and their impact on the dispersion of automobile exhausts

    OpenAIRE

    Gromke, Christof; Ruck, Bodo

    2007-01-01

    The aim of the present study is to clarify the influence of trees on the dispersion of automobile exhausts in urban street canyons. For this purpose, measurements have been performed with a small scale wind tunnel model of an idealized, isolated street canyon with model trees placed along the canyon center axis. Sulfur hexafluoride (SF6) was released from a line source embedded in the street surface, simulating vehicle exhaust emissions. The influence of various tree planting arrangements on ...

  10. Advances and trends of head-up and head-down display systems in automobiles

    Science.gov (United States)

    Betancur, J. Alejandro; Osorio-Gomez, Gilberto; Agudelo, J. David

    2014-06-01

    Currently, in the automotive industry the interaction between drivers and Augmented Reality (AR) systems is a subject of analysis, especially the identification of advantages and risks that this kind of interaction represents. Consequently, this paper attempts to put in evidence the potential applications of Head-Up (Display (HUD) and Head-Down Display (HDD) systems in automotive vehicles, showing applications and trends under study. In general, automotive advances related to AR devices suggest the partial integration of the HUD and HDD in automobiles; however, the right way to do it is still a moot point.

  11. Concept for a Differential Lock and Traction Control Model in Automobiles

    Science.gov (United States)

    Shukul, A. K.; Hansra, S. K.

    2014-01-01

    The automobile is a complex integration of electronics and mechanical components. One of the major components is the differential which is limited due to its shortcomings. The paper proposes a concept of a cost effective differential lock and traction for passenger cars to sports utility vehicles alike, employing a parallel braking mechanism coming into action based on the relative speeds of the wheels driven by the differential. The paper highlights the employment of minimum number of components unlike the already existing systems. The system was designed numerically for the traction control and differential lock for the world's cheapest car. The paper manages to come up with all the system parameters and component costing making it a cost effective system.

  12. Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

    Energy Technology Data Exchange (ETDEWEB)

    Kilic, M.; Akyol, S.M. [Uludag University, Department of Mechanical Engineering, Faculty of Engineering and Architecture, Bursa (Turkey)

    2012-08-15

    The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO{sub 2}) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO{sub 2} concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO{sub 2} level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin. (orig.)

  13. Experimental investigation of thermal comfort and air quality in an automobile cabin during the cooling period

    Science.gov (United States)

    Kilic, M.; Akyol, S. M.

    2012-08-01

    The air quality and thermal comfort strongly influenced by the heat and mass transfer take place together in an automobile cabin. In this study, it is aimed to investigate and assess the effects of air intake settings (recirculation and fresh air) on the thermal comfort, air quality satisfaction and energy usage during the cooling period of an automobile cabin. For this purpose, measurements (temperature, air velocity, CO2) were performed at various locations inside the cabin. Furthermore, whole body and local responses of the human subjects were noted while skin temperatures were measured. A mathematical model was arranged in order to estimate CO2 concentration and energy usage inside the vehicle cabin and verified with experimental data. It is shown that CO2 level inside of the cabin can be greater than the threshold value recommended for the driving safety if two and more occupants exist in the car. It is also shown that an advanced climate control system may satisfy the requirements for the air quality and thermal comfort as well as to reduce the energy usage for the cooling of a vehicle cabin.

  14. Where have all the flowers gone? Forecasting green trends in the automobile industry with a choice-based conjoint adoption model

    NARCIS (Netherlands)

    Eggers, Felix; Eggers, Fabian

    With rising gas prices, global warming, and green thinking, all-electric vehicles are currently considered the automobile technology of the future. However, besides their advantages electric drive trains also exhibit several disadvantages. Moreover, history shows several failed attempts to establish

  15. Automobile simulation model and its identification. Behavior measuring by image processing; Jidosha simulation model to dotei jikken. Gazo kaiseki ni yoru undo no keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H; Morita, S; Matsuura, Y [Osaka Sangyo University, Osaka (Japan)

    1997-10-01

    Model simulation technology is important for automobiles development. Especially, for the investigations concerning to ABS, TRC, VDC, and so on, the model should be the one which can simulates not only whole behaviors of the automobile, but also such internal information as torque, acceleration, and, velocity of each drive shafts, etc.. From this point of view, 4-wheels simulation model which can simulates almost over 50 items, was made. On the other hand, technique of 3-D image processing using 2 video cameras was adopted to identify the model. Considerably good coincidences were recognized between the simulated values and measured ones. 3 refs., 7 figs., 2 tabs.

  16. Considerations regarding tax optimization in implanted multinational enterprises through external growth for the automobile industry in Central Eastern Europe

    Directory of Open Access Journals (Sweden)

    Nitu Antonie Renata

    2008-04-01

    Full Text Available The business strategy of multinational enterprises (MNEs from the automobile industry implanted in Central-Eastern European (CEE countries (Poland, Czech Republic and Romania is an offensive one, global from operational perspective. Mainly it aims the extension of market share through horizontal growth, generally external type single-domain (Mergers and Acquisitions and internal type (Greenfield investments in a lower degree. These enterprises put in practice also a defending strategy for the owned market shares through increasing the efficiency of the production network at global level. This paper aims to present the less evident aspects of tax optimization of the applied business strategy by implemented MNEs in the automobile industry in CEE, and in this context, the necessity to establish transfer prices in accordance with the OECD recommendations, as an obligation assessed by the tax legislations of the considered countries, but also from the necessity of efficient run of these enterprises.

  17. Preliminary research on virtual thermal comfort of automobile occupants

    Science.gov (United States)

    Horobet, Tiberiu; Danca, Paul; Nastase, Ilinca; Bode, Florin

    2018-02-01

    Numerical simulation of climate conditions in automotive industry for the study of thermal comfort had become more and more prominent in the last years compared with the classical approach which consists in wind tunnel measurements and field testing, the main advantages being the reduction of vehicle development time and costs. The study presented in this paper is a part of a project intended to evaluate different strategies of cabin ventilation for improving the thermal comfort inside vehicles. A virtual thermal manikin consisting of 24 parts was introduced on the driver seat in a vehicle. A heat load calculated for summer condition in the city of Cluj-Napoca, Romania was imposed as boundary condition. The purpose of this study was to elaborate a virtual thermal manikin suitable for our research, introduction of the manikin inside the vehicle and to examine his influence inside the automobile. The thermal comfort of the virtual manikin was evaluated in terms of temperature and air velocity.

  18. Thermal energy storage for the Stirling engine powered automobile

    Science.gov (United States)

    Morgan, D. T. (Editor)

    1979-01-01

    A thermal energy storage (TES) system developed for use with the Stirling engine as an automotive power system has gravimetric and volumetric storage densities which are competitive with electric battery storage systems, meets all operational requirements for a practical vehicle, and can be packaged in compact sized automobiles with minimum impact on passenger and freight volume. The TES/Stirling system is the only storage approach for direct use of combustion heat from fuel sources not suitable for direct transport and use on the vehicle. The particular concept described is also useful for a dual mode TES/liquid fuel system in which the TES (recharged from an external energy source) is used for short duration trips (approximately 10 miles or less) and liquid fuel carried on board the vehicle used for long duration trips. The dual mode approach offers the potential of 50 percent savings in the consumption of premium liquid fuels for automotive propulsion in the United States.

  19. How the conversations in social media concern in sales in the automobile industry in spain

    OpenAIRE

    González Carreño, Gema; Rejas Muslera, Ricardo; Padilla Fernández-Vega, Juan; Cepeda González, M.I

    2013-01-01

    Automobile Industry has great importance in the Spanish economy (8,7 % of the active Spanish population is employed in this sector).The above mentioned sector has been one of the principal sectors affected by the current economic crisis, consistently, the budgets in advertising have been severely limited (46,9 % less in the period of reference), these needs of reduction have originated a substantial change in the advertising strategy (from 2007 the increase of the advertising investment in In...

  20. An impending platinum crisis and its implications for the future of the automobile

    International Nuclear Information System (INIS)

    Yang, C.-J.

    2009-01-01

    The global demand for platinum has consistently outgrown supply in the past decade. This trend likely will continue and the imbalance may possibly escalate into a crisis. Platinum plays pivotal roles in both conventional automobile emissions control and the envisioned hydrogen economy. A platinum crisis would have profound implications on energy and environment. On the one hand, inadequate platinum supply will prevent widespread commercialization of hydrogen fuel-cell vehicles. On the other hand, expensive platinum may enhance the competitiveness of hybrid, plug-in hybrid, and battery-powered electric cars. Policymakers should weigh the potential impacts of a platinum crisis in energy policy.

  1. CORPORATE SOCIAL RESPONSIBILITY IN THE AUTOMOBILE INDUSTRY IN SLOVAK REPUBLIC

    Directory of Open Access Journals (Sweden)

    Jana Vicianová

    2011-01-01

    Full Text Available At present, the corporate social responsibility should be seen not only in theory, but mainlyat the level of business practice. Companies that apply the concept of corporate socialresponsibility are aware not only of social and environmental benefits, but also theeconomic benefits that this approach brings. Assumptions of social responsibility are tomaximize the market value of the business provided that companies respect the laws andresponsibilities of owners, managers and employees. Benefits of the corporate socialresponsibility are not only companies and their stakeholders, but also society. This factinspires many large enterprises to start up a socially responsible business. The paper dealswith the corporate social responsibility concept and its implementation in the car industryin Slovak republic. The aim of the article is basically on the theories of corporate socialresponsibility to identify the level of application of this concept in automobile industry inSlovakia.

  2. AUTOMOBILE AND SELFHOOD: CAR NARRATIVES IN TURKISH LITERATURE / OTOMOBİL VE BENLİK: TÜRK EDEBİYATINDA ARABA OLGUSU

    Directory of Open Access Journals (Sweden)

    Dr. Seyit Battal UĞURLU

    2009-01-01

    Full Text Available The automobile that entered into the Turkish novelwith Recaizâde Mahmut Ekrem's Car Affairs, in onerespect, is one of the status determinant in traditionalTurkish culture that has taken part instead of horse. Theautomobiles power is still measured as horse powerwhich has close psycho-cultural ties with the discourse of'horse, woman and the gun', that is considerable code oftraditional Turkish culture. Thinking its accreditation ofcapacity of speed performance it can be stressed thatautomobiles have changeable genders depending on menand women. When producing new models, cardesignator’s inspiration is greatly feminity and body ofwomen. Becoming one of the attractive ways of selfrealization of individuals, the automobile, protects usagainst lack of confidence of the external, presentsindividuals a lot of opportunities. Automobile’sattractiveness comes from its power to provide manypossibilities of supremacy over pedestrian way of life aswell as gigantic prosperous life style. The reflections ofthis important device of modern world seems in theTurkish literature parallel with social life. In YellowTractor by Talip Apaydın, Slender Rose of my Thought byAdalet Ağaoğlu, “The Clown Rusen” by Sevim Burak andIcy Swords by Latife Tekin narration can be mentioned afocus on human technology relation as a social fact. “TheCold” by Ömer Seyfettin, “The Spare Part of Civilization”by Aziz Nesin, and “Jaguar” by Peride Celâl focuses on automobile and its social reflections. A close scrutinyhas been conducted into cars as an important mediumof self identification within the context of modern man,its reflections in Turkish literature with provocativepsycho-social factors though a critical and analyticalpoint of view.

  3. Is Automobile Dependence in Emerging Cities an Irresistible Force? Perspectives from São Paulo, Taipei, Prague, Mumbai, Shanghai, Beijing, and Guangzhou

    Directory of Open Access Journals (Sweden)

    Jeffrey R. Kenworthy

    2017-10-01

    Full Text Available This paper analyses seven metropolitan regions that are all experiencing rapid motorisation and are perhaps appearing to capitulate to the automobile. Through 20 years of changes, evidenced in systematic data from the mid-1990s, a different perspective is found. None of the urban regions appear near to or even capable of becoming automobile cities. Physical limits are already being reached that make higher levels of private motorised mobility very problematic if transport systems are to remain functional and the cities livable. These limits appear already to be reversing the decline in non-motorised modes and creating an upturn in transit systems, especially urban rail. That these cities have been able to either hold their own, or somewhat increase their share of total motorised mobility by transit over a 20-year period, is some indication that they are ‘hitting mobility walls’ much sooner in the motorisation path than cities in North America and Australia, which grew up with and were designed around the spatial needs of cars. Like many cities in the developed world that have shown a decoupling of car use and total passenger mobility from GDP growth from 1995 to 2005, there is now evidence that this is happening in less wealthy cities. This is important because it assists global and local goals for reduced CO2 from passenger transport, while allowing for economic progress. Such evidence suggests that automobile dependence is not an irresistible force in emerging economies.

  4. A DEVICE FOR PURIFICATION OF OIL- AND FAT-CONTAINING GRAY WATERS FOR THE USE AT AUTOMOBILE LAUNDRIES AND PUBLIC CATERING ESTABLISHMENTS

    International Nuclear Information System (INIS)

    Makharoblidze, N.

    2007-01-01

    There is proposed a device (a filter) for the use at automobile lauundries and public catering establishments for local purification of waste waters containing oil products and/or fats before their draining into the municipal sewage system. (author)

  5. Experimental investigations on automobile air conditioners working with R134a and R290/R600a as an alternative

    Directory of Open Access Journals (Sweden)

    Kandhaswamy Karthikeyan

    2017-01-01

    Full Text Available In this work, the performance of R134a based automobile air conditioning system has been evaluated by retrofitted with R290/R600a mixture (in the ratio of 50:50, by mass, as an alternative. The performance was evaluated at five different operating speeds (1000, 1500, 2000, 2500, and 3000, which covers the entire range of working conditions with four different cabin load (100, 200, 300, and 400 W. The condenser inlet air temperature was varied in the range between 30 and 50°C, which covers the entire climatic variations in Coimbatore city of India. The performance characteristics such as, refrigerating effect, coefficient of performance, compressor power consumption, and compressor discharge temperatures were considered for comparison. The results showed that, hydrocarbon mixture has faster cooling rate due to its high latent heat of vaporization, 5% higher coefficient of performance due to higher refrigeration effect, 8-10 K lower compressor discharge temperature due to its lower specific heat ratio with 5% lower compressor power consumption due to its lower viscosity and lower liquid density. The charge requirement of R290/R600a mixture is about 50% less compared to R134a. However, the mixture composition is considered as an interment replacement in automobile air conditioners due to composition shift under leak-age conditions. Hence, R290/R600a mixture is considered as an interim energy efficient and environment friendly option in R134a automobile air conditioners to extend its life.

  6. [Clinical manifestations of lead levels in children exposed to automobile battery recycling processes in Soacha and Bogotá, D.C].

    Science.gov (United States)

    Hurtado, Carlos Mauricio; Gutiérrez, Myriam; Echeverry, Jairo

    2008-03-01

    Lead is a harmless metal if not handled directly in the industrial process. Even thought lead has been eliminated from the gasoline in many countries, automobile battery recycling continues to be a potential source of exposure and intoxication for the workers and their families, particularly of low income. The current investigation was initiated after an index case of lead poisoning was reported from Soacha, Cundinamarca, in central Colombia. Clinical investigation established lead levels and lead poison frequency in children with para-occupational lead exposure in the process of recycling automobile batteries. This was designed as a descriptive study, with selection of subjects with high risk of possible lead exposure. Minors, mostly of school age were recruited based on referral by relatives, neighbors or acquaintances, all of whom were involved in para-occupational exposure. Thirty two children, less than 12 years old (majority school age), were included. General and specific examinations of the children were made, and blood samples were taken for lead and hematological determinations. All subjects showed high levels of lead (2-9 times the maximum acceptable value) and, according to established criteria, two-thirds were rated as severely poisoned. The children with high levels of lead had tendency toward more specific hematological compromise and showing black gingival bordering (Burton border). This study communicates to the sanitary authorities and government a clear sign of alarm in that measures must be taken to diminish the occupational or para-occupational lead exposure of children by way of the automobile battery recycling industry.

  7. Assessing location attractiveness for manufacturing automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Hanawalt, Edward; Rouse, William

    2017-07-01

    Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

  8. Assessing location attractiveness for manufacturing automobiles

    International Nuclear Information System (INIS)

    Hanawalt, Edward; Rouse, William

    2017-01-01

    Evaluating country manufacturing location attractiveness on various performance measures deepens the analysis and provides a more informed basis for manufacturing site selection versus reliance on labor rates alone. A short list of countries can be used to drive regional considerations for site-specific selection within a country. Design/methodology/approach: The two-step multi attribute decision model contains an initial filter layer to require minimum values for low weighted attributes and provides a rank order utility score for twenty three countries studied. The model contains 11 key explanatory variables with Labor Rate, Material Cost, and Logistics making up the top 3 attributes and representing 54% percent of the model weights. Findings: We propose a multi attribute decision framework for strategically assessing the attractiveness of a country as a location for manufacturing automobiles. Research limitations/implications: Consideration of country level wage variation, specific tariffs, and other economic incentives provides a secondary analysis after the initial list of candidate countries is defined. Practical implications: The results of our modeling shows China, India, and Mexico are currently the top ranked countries for manufacturing attractiveness. These three markets hold the highest utility scores throughout sensitivity analysis on the labor rate attribute weight rating, highlighting the strength and potential of manufacturing in China, India, and Mexico. Originality/value: Combining MAUT with regression analysis to simplify model to core factors then using a “must have” layer to handle extreme impacts of low weight factors and allowing for ease of repeatability.

  9. A Study of Structural Stress Technique for Fracture Prediction of an Auto-Mobile Clutch Snap-Ring

    International Nuclear Information System (INIS)

    Kim, Ju Hee; Myeong, Man Sik; Oh, Chang Sik; Kim, Yun Jae

    2016-01-01

    The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method

  10. Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

    International Nuclear Information System (INIS)

    Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

    2013-01-01

    Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48–100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20–30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals. (letter)

  11. Infrastructure and automobile shifts: positioning transit to reduce life-cycle environmental impacts for urban sustainability goals

    Science.gov (United States)

    Chester, Mikhail; Pincetl, Stephanie; Elizabeth, Zoe; Eisenstein, William; Matute, Juan

    2013-03-01

    Public transportation systems are often part of strategies to reduce urban environmental impacts from passenger transportation, yet comprehensive energy and environmental life-cycle measures, including upfront infrastructure effects and indirect and supply chain processes, are rarely considered. Using the new bus rapid transit and light rail lines in Los Angeles, near-term and long-term life-cycle impact assessments are developed, including consideration of reduced automobile travel. Energy consumption and emissions of greenhouse gases and criteria pollutants are assessed, as well the potential for smog and respiratory impacts. Results show that life-cycle infrastructure, vehicle, and energy production components significantly increase the footprint of each mode (by 48-100% for energy and greenhouse gases, and up to 6200% for environmental impacts), and emerging technologies and renewable electricity standards will significantly reduce impacts. Life-cycle results are identified as either local (in Los Angeles) or remote, and show how the decision to build and operate a transit system in a city produces environmental impacts far outside of geopolitical boundaries. Ensuring shifts of between 20-30% of transit riders from automobiles will result in passenger transportation greenhouse gas reductions for the city, and the larger the shift, the quicker the payback, which should be considered for time-specific environmental goals.

  12. R&D Importance in Improving Automobile Trading Market Perspektyvūs moksliniai tyrimai, skirti tarptautiniam prekybos automobiliais verslui plėtoti

    Directory of Open Access Journals (Sweden)

    Aurelija Mickonytė

    2011-02-01

    Full Text Available

    Production and sales of automobiles are significant parts of the 21st century economy. The aim of this study is to reveal the latest and most perspective scientific research directions in improving international automobile trading business by using scientific sources and official statistics. Scientific researchers are focused on strategic means that have to be taken in order to recover the market share and past sales volumes.This study reveals that even though sales volumes of automobiles in general are decreasing rapidly, sales of compact class automobiles are improving. Three main reasons for this fact are stated. First is price, second is the model of automobile and its technical characteristics, third reason is growing environmentalism. Regarding the mentioned reasons for automobile market over grouping by segments, three main scientific research directions are discussed: those that are due to price reduction, technical appearance focused and environment focused scientific researches.

    Keywords: scientific research, international automobile trading, automobile production improvement.

    Automobilių gamyba ir prekyba jais yra išskirtinai svarbūs elementai šiuolaikinės visuomenės ekonomikai. Šalys, kurios užsiima automobilių gamyba, gerokai padidino eksportą, kuris yra susijęs su bendro vidaus produkto ir bendro nacionalinio produkto augimu. Automobilių gamybos sektorius

  13. Providing Consumers with Web-Based Information on the Environmental Effects of Automobiles

    Energy Technology Data Exchange (ETDEWEB)

    Saulsbury, J.W.

    2003-08-25

    The Department of Energy (DOE) and the Environmental Protection Agency (EPA) provide consumers with web-based information on the environmental effects of automobiles so that individuals can make informed choices about the vehicles they use or may purchase. DOE and EPA maintain a web site (www.fueleconomy.gov) that provides users with information about fuel economy [as well as greenhouse gas (GHG) emissions and air pollution emissions] for the cars and trucks they use or may consider purchasing. EPA also maintains a separate web site (www.epa.gov/greenvehicles) that offers similar information, with the focus on air pollution emissions rather than fuel economy. The American Council for an Energy-Efficient Economy (ACEEE) (www.greenercars.com) and the California Air Resources Board (CARB) (www.arb.ca.gov/msprog/ccbg/ccbg.htm) also maintain web sites that provide consumers with information on the environmental effects of automobiles. Through the National Transportation Research Center (NTRC) at Oak Ridge National Laboratory, DOE has supported some initial qualitative research with people who are interested in purchasing a new or used vehicle and whose actions identify them as at least somewhat concerned about the environment. The purpose of this research was to explore and understand how these people respond to the different ratings and measurements of environmental effects provided by the four web sites. The goal of the research is to optimize the communication of information provided on the DOE/EPA web site (www.fueleconomy.gov). Working with a private marketing research firm (The Looking Glass Group of Knoxville, Tennessee), NTRC staff initiated this research by meeting with two focus groups in Knoxville on February 27, 2001. To obtain information for comparison, staff from the NTRC and the Looking Glass Group also met with two focus groups in Los Angeles, California, on August 13, 2001.

  14. A reestruturação na indústria automobilística brasileira perante o atual processo de globalização

    OpenAIRE

    Castro, Victor Raul Paredes

    2001-01-01

    O conteúdo deste trabalho tem como tema principal a análise da reestruturação do setor automobilístico brasileiro a partir das mudanças acontecidas nos sistemas fordista pela "produção enxuta".

  15. Logística e troca eletrônica de informação em empresas automobilísticas e alimentícias Logistics and electronic information interchange in automotive and food companies

    Directory of Open Access Journals (Sweden)

    Karine Araújo Ferreira

    2005-12-01

    Full Text Available Este artigo analisa impactos na logística pela troca eletrônica de informações entre empresas (com uso de EDI - Electronic Data Interchange e Internet, destacando a diferença destes impactos em empresas das indústrias alimentícia e automobilística. As empresas são pressionadas por parceiros para adoção destas tecnologias: a montadora é a responsável na cadeia automobilística e o grande varejo é o disseminador na cadeia alimentícia. O EDI pressupõe relações contratuais entre as empresas. As processadoras de alimentos observaram redução de erros e no tempo dos ciclos de pedido, assim como melhoria na visibilidade dos estoques e no planejamento de transporte para distribuição de seus produtos. Já nas empresas da indústria automobilística, os impactos são mais significativos no tempo e custo de processamento de pedido, com redução nos níveis e custo de estoque e de transporte para suprimento. Os resultados são de pesquisa de natureza qualitativa - estudos de casos.This paper analyzes the impacts of electronic information exchange (EDI - Electronic Data Interchange and Internet toward companies' logistics performance, emphasizing the difference of these impacts within food and automobile industries. Companies are being impelled by their partners to adopt these information technologies, whether: vehicle assemblers are responsible for the automobile chain; and great retailers work as disseminators through the food chain. EDI's implementation requires contractual relations among companies. Therefore, food processing industries aim to reduce both errors and cycle-time orders; as well as to improve inventory visibility and transport planning in the distribution of its products. However, in the automobile companies segment, the impacts are more significant in time and order processing costs, with the reduction of inventory and transport level's costs for supplying. The presented results are of qualitative research nature

  16. Physico-chemical and optical properties of combustion-generated particles from coal-fired power plant, automobile and ship engine and charcoal kiln.

    Science.gov (United States)

    Kim, Hwajin

    2015-04-01

    Similarities and differences in physico-chemical and optical properties of combustion generated particles from various sources were investigated. Coal-fired power plant, charcoal kiln, automobile and ship engine were major sources, representing combustions of coal, biomass and two different types of diesel, respectively. Scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) equipped with both SEM and HRTEM were used for physico-chemical analysis. Light absorbing properties were assessed using a spectrometer equipped with an integrating sphere. Particles generated from different combustion sources and conditions demonstrate great variability in their morphology, structure and composition. From coal-fired power plant, both fly ash and flue gas were mostly composed of heterogeneously mixed mineral ash spheres, suggesting that the complete combustion was occurred releasing carbonaceous species out at high temperature (1200-1300 °C). Both automobile and ship exhausts from diesel combustions show typical features of soot: concentric circles comprised of closely-packed graphene layers. However, heavy fuel oil (HFO) combusted particles from ship exhaust demonstrate more complex compositions containing different morphology of particles other than soot, e.g., spherical shape of char particles composed of minerals and carbon. Even for the soot aggregates, particles from HFO burning have different chemical compositions; carbon is dominated but Ca (29.8%), S (28.7%), Na(1%), and Mg(1%) are contained, respectively which were not found from particles of automobile emission. This indicates that chemical compositions and burning conditions are significant to determine the fate of particles. Finally, from biomass burning, amorphous and droplet-like carbonaceous particles with no crystallite structure are observed and they are generally formed by the condensation of low volatile species at low

  17. A study on an electronically controlled liquefied petroleum gas diesel dual-fuel automobile

    Energy Technology Data Exchange (ETDEWEB)

    Chunhua Zhang; Yaozhang Bian; Lizeng Si; Junzhi Liao; Odbileg, N. [Chang' an Univ., Automobile Faculty, Xi' an (China)

    2005-02-15

    In this paper, the control scheme of a liquefied petroleum gas (LPG)-diesel dual-fuel engine with electronic control is illustrated, the external characteristics and load characteristics of the LPG-diesel dual-fuel engine and the diesel engine are compared and analysed, and the results of automobile road tests are also given. The experimental results show that, compared with diesel, the output performance of dual fuel is not reduced, while smoke emission of dual fuel is significantly reduced, NO{sub x} emission of dual fuel is hardly changed, but HC emission and CO emission of dual fuel are increased and fuel consumption of dual fuel is reduced. (Author)

  18. The Evolution of Car Sales in S.C. Next Automobile S.A. During the Crisis

    OpenAIRE

    Savu Mihaela; Antonescu Eugenia; Mîndreci Georgiana

    2012-01-01

    The automotive industry had to withstand the effects of the economic crisis, a fact underlined by the automobile production which had a volume decrease between 2008 and 2009. The same situation occurred on the car market in Romania, with the difference that the decline began in 2009 and it has continued up to now. Regarding the car sales, the Toyota brand was negatively affected by the crisis and the number of cars sold decreased between 2009 and 2010. The same situation is specific for S.C. ...

  19. Consumer protection issues in energy: a guide for attorneys general. Insulation, solar, automobile device, home devices

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Harry I.; Hulse, William S.; Jones, Robert R.; Langer, Robert M.; Petrucelli, Paul J.; Schroeder, Robert J.

    1979-11-01

    The guide attempts to bring together two important and current issues: energy and consumer protection. Perhaps the most basic consumer-protection issue in the energy area is assuring adequate supplies at adequate prices. It is anticipated, though, that consumers will want to consider new ways to lower enegy consumption and cost, and will thus be susceptible to fraudulent energy claims. Information is prepared on insulation, solar, energy-saving devices for the home, and energy-saving devices for the automobile.

  20. An analytic hierarchy process for benchmarking of automobile car service industry in Indian context

    Directory of Open Access Journals (Sweden)

    Bhupender Singh

    2015-06-01

    Full Text Available This paper proposes an application of Analytical Hierarchy Process (AHP to help decision maker evaluate different processes to identify the weaknesses of an automobile car service where the best alternatives and critical success factors are identified to improve their performances against the market leader. The proposed benchmarking process may help provide effective systematic decision support tool. Thus the endeavor has been made for car service industry to exhibit proposed framework by applying AHP to enhance its competitiveness. The proposed study provides an opportunity to apply to other industries in addition with a diminutive alteration.

  1. Evaluation of Inhibitors Blends Used in Iraqi Markets for Automobile Cooling System

    Directory of Open Access Journals (Sweden)

    Watheq Naser Hussein

    2017-08-01

    Full Text Available Detection the behavior of some metals ( carbon steel and copper that are widely used in automobiles cooling system in tap water and a cooling mixture for radiators was held. The purpose of this work is to check the performance of two types of mixtures that available in Iraqi markets, viz the Kuwait mixture and the Germany one and what are known as blue water by an electrochemical technique. The experiments were held at two values of temperatures of 17 and 80 ˚C-where these values of temperature almost represent the cases of idle and operating engine. The obtained results showed that the two types of mixtures have given good inhibition efficiency for the case of steel especially in presence of Germany mixture.

  2. APPLICATION OF FAILURE MODE & EFFECT ANALYSIS (FMEA FOR CONTINUOUS QUALITY IMPROVEMENT - MULTIPLE CASE STUDIES IN AUTOMOBILE SMES

    Directory of Open Access Journals (Sweden)

    Jigar Doshi

    2017-06-01

    Full Text Available Failure Mode and Effects Analysis (FMEA is a quality tool used to identify potential failures and related effects on processes and products, so continuous improvement in quality can be achieved by reducing them. The purpose of this research paper is to showcase the contribution of FMEA to achieve Continuous Quality Improvement (CQI by multiple case study research. The outcome research conducted by implementing FMEA; one of the Auto Core Tools (ACTs, in the automobile Small and Medium Enterprises (SMEs in Gujarat, India is presented in this paper which depict various means of Continuous Quality Improvements. The case study based research was carried out in four automobile SMEs; all of them are supplied to automotive Original Equipment Manufacturer (OEM. The FMEA was implemented with the help of Cross Functional Team (CFT to identify the potential failure modes and effects, in overall effect on Continuous Quality Improvement. The outcome of FMEA at four companies' reveals the scope of improvement exists in the manufacturing process. Implementation of those improvement points shows the definite signs of continuous improvement of the quality of process and product as well. The FMEA and subsequent implementations had reduced the quality rejections around 3% to 4% in case companies.

  3. Learning Achievement Packages in Social Studies. Procedimientos para Manejar. Mantenimiento del Automovil. Llantas. (Procedures for Driving. Maintenance of an Automobile. Tires.)

    Science.gov (United States)

    Rendon, Rene

    This publication presents three suggested social studies curriculum units designed for the bilingual Spanish-English classroom, but which would also be useful in advanced Spanish language classes for English speakers. The units, developed for grades 7-11, are entitled, "Procedures for Driving,""Maintenance of an Automobile,"…

  4. CERN’s automobile fleet turns a brighter shade of green

    CERN Document Server

    Anaïs Vernède

    2011-01-01

    CERN is partnering with Services Industriels de Genève (SIG) in an environmentally friendly initiative to acquire cars running on natural gas. The first forty vehicles will arrive at CERN around mid-February, and enter service in March.   On 3 February 2011 CERN, represented by Steve Myers at the FEDRE Forum, was awarded the mobility prize. CERN currently has approximately 800 vehicles in use at its different sites. Véronique Marchal, head of Site Services in the GS Department, explains: “Our fleet includes a great variety of vehicles, from small Category A cars for staff to utility/transport vehicles. The decision to acquire cars running on natural gas is part of our strategy of diversifying CERN's automobile fleet so as to make it more environmentally friendly.” The new cars are actually bi-fuel, which means that they will have two tanks: one for regular fuel and one for compressed natural gas (CNG). “This kind of car is a little more exp...

  5. Thermal valorisation of automobile shredder residue: injection in blast furnace.

    Science.gov (United States)

    Mirabile, Daphne; Pistelli, Maria Ilaria; Marchesini, Marina; Falciani, Roberta; Chiappelli, Lisa

    2002-01-01

    Wastes with residual heating value, according to the trend of the world legislation, could be thermally reused. The present study is conducted to verify the possibility of thermal valorisation of a waste, denominated fluff, by injection in blast furnace. The fluff, arising from the automobile shredder operations, is a waste characterised by a high organic matrix and is potentially dangerous due to the heavy metals, oils filter and halogenated plastics content. The first step of the work is the chemical, physical and toxicological characterisation of this material. Then the fluff injection in a blast furnace tuyere is theoretically analysed with a mathematical model. Finally, experimental trials are conducted in a pilot plant, simulating the most important part of the blast furnace: the raceway, in order to analyse process and industrial aspects. In view of an industrial application a first economical evaluation is carried out on the basis of model and experimental results.

  6. Productivity Growth in the Automobile Industry, 1970-1980: A Comparisonof Canada, Japan and the United States

    OpenAIRE

    Melvyn A. Fuss; Leonard Waverman

    1985-01-01

    In this paper we calculate and analyze the automobile industries cost and productivity experience during the 1970 's in Canada, the U.S.and Japan. Utilizing an econometric cost function methodology, we are able to isolate the major source of short-run disequilibrium in this industry-variations' in capacity utilization-and analyze its effects on cost and total factor productivity (TFP) gross. This is achieved through a novel application of the Viner-Wng envelope theorem, which allows us to tra...

  7. Lead on vegetation as indicator of air pollution due to automobile exhaust's gases

    Energy Technology Data Exchange (ETDEWEB)

    Impens, R; Deroanne-Bauvin, J; Tilman, J

    1974-01-01

    Lead is regarded as an undesirable air contaminant. It's effects on health are well documented. Lead levels in air are very high in cities. Analyses have been performed on soils and urban vegetation (trees, shrubs and plants growing in city parks or near urban highways) from fifteen sites in Brussels. The collections were made from 72 to actually, at each site. The sites gave a very wide range of traffic density. A very significant correlation of lead concentration with density and characteristics of urban traffic was found. A continuous survey of lead levels on vegetation is a good indicator of air pollution caused by automobile exhaust's gases in urban and suburban areas.

  8. Contribution of Road Grade to the Energy Use of Modern Automobiles Across Large Datasets of Real-World Drive Cycles: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wood, E.; Burton, E.; Duran, A.; Gonder, J.

    2014-01-01

    Understanding the real-world power demand of modern automobiles is of critical importance to engineers using modeling and simulation to inform the intelligent design of increasingly efficient powertrains. Increased use of global positioning system (GPS) devices has made large scale data collection of vehicle speed (and associated power demand) a reality. While the availability of real-world GPS data has improved the industry's understanding of in-use vehicle power demand, relatively little attention has been paid to the incremental power requirements imposed by road grade. This analysis quantifies the incremental efficiency impacts of real-world road grade by appending high fidelity elevation profiles to GPS speed traces and performing a large simulation study. Employing a large real-world dataset from the National Renewable Energy Laboratory's Transportation Secure Data Center, vehicle powertrain simulations are performed with and without road grade under five vehicle models. Aggregate results of this study suggest that road grade could be responsible for 1% to 3% of fuel use in light-duty automobiles.

  9. Investigations into the effect of automobile exhausts on the phenology, periodicity and productivity of some roadside trees

    Directory of Open Access Journals (Sweden)

    Ghulam Bhatti

    2014-01-01

    Full Text Available In response to a polluted atmosphere, the phenology of Ficus benyalensis and Eucalyptus sp. was highly affected. The yield of seeds and fruits of Gunincun officinale and Azadirachta indica was lessened at the polluted sites. The automobile emissions significantly reduced the productivity in G. officinale, F. bengalensis and Eucalyptus sp., whereas, A. indica was comparatively resistant to vehicle exhaust pollution. Leaf area and dry weight were significantly reduced in most of the plants.

  10. Ethanol as an Alternative Fuel for Automobiles: Using the First Law of Thermodynamics to Calculate the "Corn-Area-per-Car" Ratio

    Science.gov (United States)

    Pietro, William J.

    2009-01-01

    Students will use the first law of thermodynamics to determine the feasibility of using corn ethanol as an alternative to fossil fuels in automobiles. Energy flow is tracked from the Sun, to photosynthesized carbohydrate, to ethanol through fermentation, and finally to work in the combustion engine. Feasibility is gauged by estimating a…

  11. Study of lead pollution from automobile emissions in Khartoum

    International Nuclear Information System (INIS)

    Ibrahim, A.S.

    2002-07-01

    Aerosol and soil samples were collected from places near the main roads in Khartoum area. The samples were analyzed by energy Dispersive x-ray fluorescence (EDXRF) technique, to study the lead (Pb) concentration in air and soil near roadsides due to automobile emissions. The aim of the study was also to make a comparison with the results of previous measurements made in the same field (Ahmed, 1983) . Thee aerosol samples were taken from three sites in Khartoum area. Tuti island taken as a control area, central Khartoum as a commercial area and south of Khartoum as a residential area. Soil samples were taken from a place near Al Gurashi Park and another near Abu Hamama traffic junction in Khartoum area. The data obtained of (Pb) concentrations in the roadside air were statistically analyzed. Comparisons were made between the concentrations at the various times of the day and correlation were made with meteorological parameters. The (Pb) concentrations in the roadside soil were observed to be inversely proportional to the distance from the road and the depth from the layer of the earth. Finally, the results obtained are discussed and some recommendations are suggested. (Author)

  12. Study on key technologies of vehicle networking system platform for electric automobiles based on micro-service

    Science.gov (United States)

    Ye, Fei

    2018-04-01

    With the rapid increase of electric automobiles and charging piles, the elastic expansion and online rapid upgrade were required for the vehicle networking system platform (system platform for short). At present, it is difficult to meet the operation needs due to the traditional huge rock architecture used by the system platform. This paper studied the system platform technology architecture based on "cloud platform +micro-service" to obtain a new generation of vehicle networking system platform with the combination of elastic expansion and application, thus significantly improving the service operation ability of system.

  13. As manifestações da sustentabilidade ambiental na publicidade da indústria automobilística brasileira

    OpenAIRE

    Helio Pedro da Silva

    2012-01-01

    A presente pesquisa tem por objetivo estudar a maneira como a indústria automobilística brasileira tem abordado a sustentabilidade ambiental nos seus discursos publicitários. A iniciativa de lançar o olhar sobre tal dimensão da comunicação das marcas foi motivada, particularmente, pelos sentidos antagônicos projetados pelo bem automóvel na sociedade contemporânea. Por um lado, admirado como meio de transporte e mobilidade, e viabilizador de variadas expressões identitárias. E, por outro, crit...

  14. THE EFFECT OF GASOLINE-LIKE FUEL PRODUCED FROM WASTE AUTOMOBILE TIRES ON EMISSIONS IN SPARK-IGNITION ENGINES

    OpenAIRE

    ÖZTOP, H. F.; VAROL, Y.; ALTUN, Ş.; FIRAT, M.

    2016-01-01

    In the present paper, the effect of Gasoline-Like Fuel (GLF) on emissions was investigated for direct injection spark-ignited engine. The GLF was obtained from waste automobile tires by using the pyrolysis. The tires are installed to oven without any procedure such as cutting, melding etc. Obtained GLF was then used in a four-cylinder, four-stroke, water-cooled and direct injection spark-ignited engine as blended with unleaded gasoline from 0% to 60% with an increment of 10%. Engine tests res...

  15. Dynamic behavior of the mechanical systems from the structure of a hybrid automobile

    Science.gov (United States)

    Dinel, Popa; Irina, Tudor; Nicolae-Doru, Stănescu

    2017-10-01

    In introduction are presented solutions of planetary mechanisms that can be used in the construction of the hybrid automobiles where the thermal and electrical sources must be coupled. The systems have in their composition a planetary mechanism with two degrees of mobility at which are coupled a thermal engine, two revertible electrical machines, a gear transmission with four gears and a differential mechanism which transmits the motion at the driving wheels. For the study of the dynamical behavior, with numerical results, one designs such mechanisms, models the elements with solids in AutoCAD, and obtains the mechanical properties of the elements. Further on, we present and solve the equations of motion of a hybrid automotive for which one knows the dynamical parameters.

  16. Removal of oil and grease from automobile garage wastewater using electrocoagulation

    Science.gov (United States)

    Manilal, A. M.; Harinarayanan Nampoothiri, M. G.; Soloman, P. A.

    2017-06-01

    Wastewater from automobile garages and workshops is an important contributor to the water pollution. Oil and grease is one of the major content of wastewater from vehicle garages. Wastewater from a public transport depot at Thrissur district in Kerala, India was collected for the study. A batch reactor has been devised to assess the efficacy of electrocoagulation in removing oil and grease from the wastewater. Aluminium and iron were tested as the anode material with stainless steel as cathode. Experiments were conducted to investigate the effect of various operating parameters such as current density, pH, time and salt concentration on oil and grease removal. The results shown that aluminium is superior to iron in removing the oil and grease from the wastewater. The reactor with aluminium as anode was able to remove 90.8 % of the oil and grease at a current density of 0.6 A/dm2 in 15 minutes. The calculated specific energy consumption is also less for aluminium in comparison with iron.

  17. Aspects économiques de l'industrie automobile dans le monde Economic Aspects of the Auto-Motive Industry in the World

    Directory of Open Access Journals (Sweden)

    Valais M.

    2006-11-01

    Full Text Available Cette étude décrit les caractéristiques et les implications économiques les plus importantes de l'industrie automobile dans le monde. Après avoir situé l'importance des grands pays constructeurs mondiaux par leurs productions, leurs parcs et leurs échanges, la situation de la France est étudiée plus particulièrement. Cette analyse plus fine montre la structure et aussi les relations de l'industrie automobile française avec son marché, ses concurrents extérieurs, l'économie nationale tout entière et celle de ses utilisateurs. This survey covers the most important features and economic implications of the automotive industry in the world. After situating the positions of the leading worldwide manufacturers with regard to their output, the number of their vehicles in use and their foreign trade, special attention is paid to the situation of France. This closer analysis shows the structure of the automotive industry as well as its relations with its market, its foreign markets, the national economy as a whole and that of its users.

  18. Ergonomic study of biorhythm effect on the 62 occurrence of human errors and accidents in automobile manufacturing industry

    OpenAIRE

    2012-01-01

    Background and Aim: According to the biorhythm theory when the phase shift from positive to negative and vice versa people experience a critical an unstable day that prone them to error and accident. The purpose of this study is to determine this relationship in one of the automobile manufacturing industry. . Materials and Methods: At first 1280 person incident entered the study was reviewed and then the critical days of each biological cycle was determined using the software Easy Biorh...

  19. Determination of Polycyclic Aromatic Hydrocarbons in Automobile Exhaust by Means of High-Performance Liquid Chromatography with Fluorescence Detection

    DEFF Research Database (Denmark)

    Nielsen, Tom

    1979-01-01

    A chromatographic method has been developed and applied to the determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter in automobile exhaust, in petrols, and in crankcase oils. The PAHs were purified from other organic compounds by thin-layer chromatography, separated by high......-performance liquid chromatography, and measured by means of on-line fluorescence detection. The identities of the PAHs were verified by comparing the emission spectra obtained by a stop-flow technique with those of standard PAHs...

  20. Development of electrostatic charging evaluation equipment for automobile seat; Jidoshayo seat no taidensei shiken hyoka sochi no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Maeda, K [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    When passengers get out of vehicle, electrostatics is generated by separation of seat cloth and passenger cloth, and then charged to passenger`s body. It has been impossible for us to simulate this induction charging phenomenon with current evaluation equipments. We developed a new seat cloth evaluation equipments using induction charging plate, which enables us to simulate the phenomenon. This paper describes this new electrostatic charging evaluation method for automobile seat cloth. 5 refs., 6 figs.

  1. The effect of three ergonomics training programs on the prevalence of low-back pain among workers of an Iranian automobile factory: a randomized clinical trial.

    Science.gov (United States)

    Aghilinejad, M; Bahrami-Ahmadi, A; Kabir-Mokamelkhah, E; Sarebanha, S; Hosseini, H R; Sadeghi, Z

    2014-04-01

    Many workers suffer from low-back pain. Type and severity of spinal complaints have relationship with work load. Lack of adherence to ergonomics recommendations among the important causes of low-back pain. To assess the effect of 3 ergonomics training programs on the prevalence of lowback pain among workers of an Iranian automobile factory. In a parallel-design 4-arm randomized clinical trial, 760 active workers of an automobile factory were studied. 503 workers were found eligible and randomized into 3 intervention groups (n=252), and a control group (n=251). The intervention groups consisted of 3 arms: 84 workers were educated by pamphlet, 84 by lectures, and 84 by workshop. Nordic questionnaire was used to determine the prevalence of spinal complaint before and 1-year after the interventions. The trial is registered with the Iranian Randomized Clinical Trial Registry, number IRCT2013061213182N2. Out of 503 workers, 52 lost to follow-up leaving 451 workers for analyses. The prevalence of low-back pain at the baseline was not significantly different among the studied arms. 1-year after the interventions, the prevalence did not change significantly from the baseline values for the lecture and pamphlet group. However, the prevalence of LBP experienced during the last year significantly (p=0.036) decreased from 42% to 23% in participant took part in the workshop. Training of automobile factory workers in ergonomics is more effective by running workshop than giving lecture or disseminating pamphlet.

  2. A comparative study among the three wheeler automobile drivers on pulmonary function tests in adult males of Gulbarga city

    Directory of Open Access Journals (Sweden)

    Afshan Afroz, Salgar Veeresh B, Sugoor Manjushree, Swati I Amrutha

    2013-01-01

    Full Text Available Development of our country has led to rapid urbanization and there is increasing use of automobiles that is aggravating environmental pollution. Occupational exposure to automobile exhaustand industrial smokes has been shown to affect functioning of different systems of the body. The present study was taken up to assess the Pulmonary Function Tests (PFT in auto rickshaw drivers of Gulbargacity. Methods: Fifty non –smoker male auto drivers in the age group of 20–50 years for more than 5 years of auto driving experience formed the study group. Age and sex matched individuals not exposed to auto rickshaw driving [administrative staff] formed the control group. Pulmonary function parametersFVC, FEV1, FEV1%, PEFR, PIFR, FEF25-75, FEF50 and MVV were assessed using a computerized Spiro meter during their working hours and were statistically analyzed. Results: There was a highly significant decrease in FVC and FEV1 in the study group compared to control group. The decrease in FEV1%, PIFR, FEF25-75 and FEF50 were statistically significant but the decrease in PEFR and MVV were statistically nonsignificant. Conclusion: Our findings point towards the adverse effects of vehicle exhaust on lung functions, mainly on lower airways with restrictive pattern of disease.

  3. POUR UNE HISTOIRE DE L'AUTOMOBILE INSÉRÉE DANS LA SOCIÉTÉ (FRANÇAISE)

    OpenAIRE

    Lejeune , Dominique

    2016-01-01

    Licence; Schématiquement, l'histoire des constructeurs automobiles voit, d'après Jean-Louis Loubet, se succéder le temps des pionniers (jusqu'en 1914), le temps des ingénieurs (± années 20), le temps des crises (1929-1945), le temps de la production de masse (1945-1955), la notion ayant été inventée par Henry Ford et imaginée pour la France par André Citroën dans les années 20, le temps des vingt glorieuses (1955-1974), le temps des illusions (1974-v. 1982) et le temps du renouveau (v. 1982-)...

  4. Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 3. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Stan, Cornel [California Univ., Berkeley, CA (United States); Paris-1 Univ., 75 (France); Pisa Univ. (Italy); Perugia Univ. (Italy); Kronstadt Univ. (Russian Federation)

    2012-07-01

    This book describes and assesses on the basis of the latest research and development projects worldwide what the possibilities are for the realisation of future drive concepts, ranging from battery-driven electromotors to hybrid systems combining electromotor and combustion engine to alternative energy resources such as hydrogen or alcohol. Power density, torque band, acceleration characteristics, specific energy consumption and chemical and noise emissions are the most important criteria for assessing the quality of a drive configuration. The boundary conditions for the introduction of alternative automotive drives are determined by the availability or production characteristics and the storability of the energy resources in question as well as by the degree of technical complexity, costs, safety, infrastructure and service. This book provides an updated overview and analysis of the processes, prime movers and energy resources that can be combined in complex energy management systems for automobiles. Up-to-date information of this kind is indispensable for the development of new concepts. The contents in overview: current data and facts on the development of new concepts; compact overview and analysis of processes, prime movers and energy resources; methods and solutions in designing alternative drives. [German] Die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von batteriebetriebenen Elektromotoren und Hybridsystemen bestehend aus Elektro- und Verbrennungsmotor ueber Brennstoffzellen bis hin zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden auf Basis neuesten Forschungs- und Entwicklungsarbeiten weltweit praesentiert und bewertet. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind wichtige Merkmale zur Beurteilung der Qualitaet einer Antriebskonfiguration. Die Verfuegbarkeit oder die Herstellungsmerkmale sowie die Speicherfaehigkeit

  5. Governments’ Interventions into the Real Economy under WTO Law Revisited: New Tendencies of Governmental Support of the Automobile Industry

    OpenAIRE

    Weber, Rolf H.; Grosz, Mirina

    2009-01-01

    The automobile industry has received unprecedented governmental support during the ongoing economic crisis. Rescue packages have been provided to sustain the significant market branch and asserted key driver of growth, export, innovation, and jobs particularly in the EU and the United States and to avoid further downward spirals, which risk affecting the national economies on a wider scale. Since such tendencies can have trade distorting effects, however, the question arises whether the incre...

  6. 40 CFR Appendix A to Subpart IIIi... - Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions From...

    Science.gov (United States)

    2010-07-01

    ... captured and delivered to the control device by the fraction of coating sprayed in the spray booth that is... Emission Rate of Automobile and Light-Duty Truck Topcoat Operations,” EPA-450/3-88-018 (Docket ID No. OAR...-Duty Truck Topcoat Operations,” EPA-450/3-88-018 (Docket ID No. OAR-2002-0093 and Docket ID No. A-2001...

  7. STRATEGIC HUMAN RESOURCE MANAGEMENT PRACTICES AND ITS IMPACT ON WORK LIFE BALANCE OF EMPLOYEES OF AUTOMOBILE INDUSTRY IN PUNE REGION

    OpenAIRE

    Dr. K. Ramamurthi; Mr. Lambodar Saha

    2017-01-01

    Various strategic practices have already been established to promote the value of Human Resource Management in organizations. The Human Resource Management function is now considered as a strategic tool in the formulation and implementation of organizational strategies to attain its objectives. Automobile Industries are chosen as subjects for this study with specific aspects relating to various strategic human resource management practices and its impact on work-life balance and to determine ...

  8. Fiscal 2000 achievement report on the venture business assisting type regional consortium - Core industry creation type. Thermoelectric energy recovery system for automobile; 2000 nendo chiiki consortium kenkyu kaihatsu jigyo seika hokokusho. Jidoshayo netsuden energy kaishu system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The project aims to develop a system for recovering heat from the thermal energy of automobile exhaust in the form of electric energy. Skutterudite based thermoelectric materials for high temperature use and existing thermoelectric materials for low/middle temperature use were improved in performance, and a dimensionless thermoelectric performance index of ZT=1 was attained. Advanced processes were applied for improvement on the performance of existing thermoelectric materials. In the effort to develop technologies for the mass production of thermoelectric materials for high temperature use, a material manufacturing process was established for manufacturing materials excellent in thermoelectric and mechanical properties using a method for mass-producing sinterable materials by gas atomization and a large discharge plasma sintering process capable of treating large specimens. In the effort to improve automobile power generation modules in performance and to establish element technologies for their manufacture, technologies were developed involving thermoelectric materials and electrodes, bonding of different thermoelectric materials, bonding of heat conducting electrical insulators and electrodes, and high efficiency segment type power generation modules. A high performance automobile exhaust gas heat exchanger was developed. A Co-Sb based thermoelectric module and a Bi-Te based module were combined and the package was tested aboard automobiles, when a maximum power output of 83W was achieved. It is necessary to review module arrangement. (NEDO)

  9. The Effect of Three Ergonomics Training Programs on the Prevalence of Low-Back Pain among Workers of an Iranian Automobile Factory: A Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    M Aghilinejad

    2014-04-01

    Full Text Available Background: Many workers suffer from low-back pain. Type and severity of spinal complaints have relationship with work load. Lack of adherence to ergonomics recommendations among the important causes of low-back pain. Objective: To assess the effect of 3 ergonomics training programs on the prevalence of lowback pain among workers of an Iranian automobile factory. Methods: In a parallel-design 4-arm randomized clinical trial, 760 active workers of an automobile factory were studied. 503 workers were found eligible and randomized into 3 intervention groups (n=252, and a control group (n=251. The intervention groups consisted of 3 arms: 84 workers were educated by pamphlet, 84 by lectures, and 84 by workshop. Nordic questionnaire was used to determine the prevalence of spinal complaint before and 1-year after the interventions. The trial is registered with the Iranian Randomized Clinical Trial Registry, number IRCT2013061213182N2. Results: Out of 503 workers, 52 lost to follow-up leaving 451 workers for analyses. The prevalence of low-back pain at the baseline was not significantly different among the studied arms. 1-year after the interventions, the prevalence did not change significantly from the baseline values for the lecture and pamphlet group. However, the prevalence of LBP experienced during the last year significantly (p=0.036 decreased from 42% to 23% in participant took part in the workshop. Conclusion: Training of automobile factory workers in ergonomics is more effective by running workshop than giving lecture or disseminating pamphlet.

  10. Automobile, construction and entertainment business sector influences on sedentary lifestyles.

    Science.gov (United States)

    Parra, Diana C; de Sá, Thiago H; Monteiro, Carlos A; Freudenberg, Nicholas

    2018-04-01

    Sedentary lifestyles contribute to premature death and health inequalities. Researchers have studied personal and community-level determinants of inactivity but few have analyzed corporate influences. To reframe the public health debate on inactivity and open new doors for public sector intervention, we conducted a scoping review of evidence from several disciplines to describe how the business and political practices of the automobile, construction, and entertainment sectors have encouraged sedentary lifestyles. In the last 50 years, these industries have found it profitable to produce motor vehicles, housing, and entertainment, which intentionally or unintentionally discourage physical activity. Ceding primary authority for policy decisions in these sectors to the market-based economy has enabled the growth of powerful lobbies that encourage and maintain sedentary lifestyles. To counteract these influences, public health and civil society need to confront more upstream economic and social determinants of sedentary lifestyles. Building on evidence from efforts to change harmful tobacco, alcohol and food industry practices, we propose the creation of research and policy agendas that contribute to public health practice that can modify corporate practices that contribute to physical, social and political environments that discourage physical activity.

  11. Examination of Energy Efficiency Increasing Measures in an Automobile Assembly Plant

    Directory of Open Access Journals (Sweden)

    Fatma ÇANKA KILIÇ

    2018-03-01

    Full Text Available In this study, energy consumption analysis was performed in a car assembly plant (Body-inWhite (BiW productions, painting processes, chassis and accessory assembly processes. Examined automobile assembly plant has a production capacity of 200,000 vehicles per year by working six days a week and three shifts a day. Highly energy consuming processes are determined. Energy efficiency increasing opportunities in energy consuming systems (paint shop, drying ovens, compressed air, heating and cooling systems and effects of current automotive assembly techniques on energy efficiency are examined. Most of the total energy in the studied plant is consumed in the paint shop. Considering annual energy consumption; paint shop is responsible for the %50 of total electrical energy and %70 of total natural gas consumption. Specific energy consumption of plant is calculated as 853 kWh (SET; 275 kWh for electricity consumption (SETe , and 578 kWh for natural gas (SETdg . By performing determined energy efficiency measures; SET of plant will reduce %1 for the SETe , and %5,7 for SETdg

  12. Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

    Science.gov (United States)

    Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

    2011-07-01

    More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

  13. Pollution control and metal resource recovery for low grade automobile shredder residue: a mechanism, bioavailability and risk assessment.

    Science.gov (United States)

    Singh, Jiwan; Lee, Byeong-Kyu

    2015-04-01

    Automobile shredder residue (ASR) is considered as hazardous waste in Japan and European countries due to presence of heavy metals. This study was carried on the extraction characteristics of heavy metals (Mn, Fe, Ni, and Cr) from automobile shredder residue (ASR). The effects of pH, temperature, particle size, and liquid/solid ratio (L/S) on the extraction of heavy metals were investigated. The recovery rate of Mn, Fe, Ni, and Cr increased with increasing extraction temperature and L/S ratio. The lowest pH 2, the highest L/S ratio, and the smallest particle size showed the highest recovery of heavy metals from ASR. The highest recovery rates were in the following order: Mn > Ni > Cr > Fe. Reduction of mobility factor for the heavy metals was observed in all the size fractions after the recovery. The results of the kinetic analysis for various experimental conditions supported that the reaction rate of the recovery process followed a second order reaction model (R(2) ⩾ 0.95). The high availability of water-soluble fractions of Mn, Fe, Ni, and Cr from the low grade ASR could be potential hazards to the environment. Bioavailability and toxicity risk of heavy metals reduced significantly with pH 2 of distilled water. However, water is a cost-effective extracting agent for the recovery of heavy metals and it could be useful for reducing the toxicity of ASR. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Measurement of particle emission in automobil exhaust - application of continuous radiometric aerosol measurement to the emission of diesel engines

    International Nuclear Information System (INIS)

    Krasenbrink, A.; Georgi, B.

    1989-01-01

    The well-known method of measuring continuously dust by β-absorption is transferred to the problem of particle emission in automobile exhaust. With two similar dust-monitors FH62 having different sampling air flow rates and two low-pressure impactors the reliability of radiometric mass determination was verified. First static experiments with diesel soot showed the necessity of a dilution system, a new mass calibration with regard to the changed β-absorptivity and a quicker calculation of concentration for realtime measurements. (orig.) [de

  15. CHEMICAL INTERACTIONS TO CLEANUP HIGHLY POLLUTED AUTOMOBILE SERVICE STATION WASTEWATER BY BIOADSORPTION-COAGULATION-FLOCCULATION

    Directory of Open Access Journals (Sweden)

    Carlos Banchon

    2017-01-01

    Full Text Available The present study addresses an ecofriendly solution to treat automobile service stations effluents with high concentrations of oily substances, surfactants, organic matter and heavy metals. Bioadsorption using sawdust from pine trees, sugar cane bagasse and coconut coir without any chemical modification removed colloidal contamination up to 70%. Polyaluminium chloride, ferric chloride and polyacrylamide were applied to remove dissolved and colloidal pollutants under saline conditions without change of initial pH. Both bioadsorption and coagulation-flocculation removed up to 97.8% of BOD, COD, surfactants and heavy metals at a saline concentration of 1.5% NaCl. The increase of ionic strength promoted a high sludge index and a representative cost saving in chemicals consumption of almost 70%. High levels of pollution removal with the minimal use of chemicals is herein presented.

  16. Design and analysis of automobile components using industrial procedures

    Science.gov (United States)

    Kedar, B.; Ashok, B.; Rastogi, Nisha; Shetty, Siddhanth

    2017-11-01

    Today’s automobiles depend upon mechanical systems that are crucial for aiding in the movement and safety features of the vehicle. Various safety systems such as Antilock Braking System (ABS) and passenger restraint systems have been developed to ensure that in the event of a collision be it head on or any other type, the safety of the passenger is ensured. On the other side, manufacturers also want their customers to have a good experience while driving and thus aim to improve the handling and the drivability of the vehicle. Electronics systems such as Cruise Control and active suspension systems are designed to ensure passenger comfort. Finally, to ensure optimum and safe driving the various components of a vehicle must be manufactured using the latest state of the art processes and must be tested and inspected with utmost care so that any defective component can be prevented from being sent out right at the beginning of the supply chain. Therefore, processes which can improve the lifetime of their respective components are in high demand and much research and development is done on these processes. With a solid base research conducted, these processes can be used in a much more versatile manner for different components, made up of different materials and under different input conditions. This will help increase the profitability of the process and also upgrade its value to the industry.

  17. The impact of fixed and variable cost on automobile demand: Evidence from Denmark

    DEFF Research Database (Denmark)

    Mulalic, Ismir; Rouwendal, Jan

    2015-01-01

    and derive an expression for the full willingness to pay for characteristics that takes into account the impact on fixed as well as variable costs. We apply the model to the demand for automobiles using rich Danish register data. Estimation reveals considerable heterogeneity and a non-negligible contribution......Many car characteristics, for instance cabin space and engine power, have a positive impact on fixed and variable costs. We extend the hedonic model, that considers only one type of cost, to the situation in which fixed as well as variable costs depend on the characteristics of the durable...... of the variable costs in total willingness to pay. Next we show that under suitable assumptions a structural interpretation of our estimates is possible. We show that the willingness to pay per kilometer driven can be interpreted as a parameter of the utility function and study how it is related to household...

  18. Automobile Accidents Attended by Mobile Emergency Care Service

    Directory of Open Access Journals (Sweden)

    Ana Virgínia Gomes Barros

    2017-05-01

    Full Text Available Background: Automobile accidents are increasing every day and are becoming a serious public health problem due to the high morbidity and mortality rate. The goal of the current study was to characterise the traffic accidents attended by the Mobile Emergency Care Service (MECS in Ibiara, PB. Methods: This exploratory, descriptive, documentary study adopted a quantitative approach and analysis of data. The population consisted of all victims of traffic accidents attended by MECS in the city of Ibiara, PB, from June 2015 to June 2016. The following variables were studied: age, gender, time and day of the week the accident occurred, nature of the incident, substance ingested by the victim, wearing personal protective equipment (PPE or not, the anatomical lesions on the victim and the body regions hit during the accident. Results: The sample consisted of 49 accident victims, and the majority (81.6% were male, predominately 30 to 59 years. Events occurring at night (63.3% and during the week (65.3% predominated. The most frequent type of accident was motorcycle fall (71.4%, with almost half having consumed alcohol (46.9% and most not wearing PPE (77.6%. The regions of the body most affected were the lower limbs (67.3% and upper limbs (53.1%. Conclusion: The main factor/cause of these accidents was due to imprudence and violation of traffic laws, highlighting the need to invest in traffic education policies, to direct campaigns for the prevention of traffic accidents, as well as expand the surveillance of traffic laws by authorities.

  19. Weight Penalty Incurred in Thermoelectric Recovery of Automobile Exhaust Heat

    Science.gov (United States)

    Rowe, D. M.; Smith, J.; Thomas, G.; Min, G.

    2011-05-01

    Thermoelectric recovery of automobile waste exhaust heat has been identified as having potential for reducing fuel consumption and environmentally unfriendly emissions. Around 35% of combustion energy is discharged as heat through the exhaust system, at temperatures which depend upon the engine's operation and range from 800°C to 900°C at the outlet port to less than 50°C at the tail-pipe. Beneficial reduction in fuel consumption of 5% to 10% is widely quoted in the literature. However, comparison between claims is difficult due to nonuniformity of driving conditions. In this paper the available waste exhaust heat energy produced by a 1.5 L family car when undergoing the new European drive cycle was measured and the potential thermoelectric output estimated. The work required to power the vehicle through the drive cycle was also determined and used to evaluate key parameters. This enabled an estimate to be made of the engine efficiency and additional work required by the engine to meet the load of a thermoelectric generating system. It is concluded that incorporating a thermoelectric generator would attract a penalty of around 12 W/kg. Employing thermoelectric modules fabricated from low-density material such as magnesium silicide would considerably reduce the generator weight penalty.

  20. The prevalence of musculoskeletal disorders and occupational risk factors in Kashan SAIPA automobile industry workers by key indicator method (KIM), 1390

    OpenAIRE

    2012-01-01

    Introduction: work related musculoskeletal disorders are the most wide spread type of occupational diseases among workers. Awkward body postures during work and manual material handling are among the most important risk factors of musculoskeletal disorders in different jobs. Due to importance of recognizing these factors prevalence and risk factor of work related musculoskeletal disorders, this research was aimed to study the among employees of Kashan City’s Saipa automobile industry in 2...

  1. Life-cycle Energy and Emissions Inventories for Motorcycles, Diesel Automobiles, School Buses, Electric Buses, Chicago Rail, and New York City Rail

    OpenAIRE

    Chester, Mikhail; Horvath, Arpad

    2009-01-01

    The development of life-cycle energy and emissions factors for passenger transportation modes is critical for understanding the total environmental costs of travel. Previous life-cycle studies have focused on the automobile given its dominating share of passenger travel and have included only few life-cycle components, typically related to the vehicle (i.e., manufacturing, maintenance, end-of-life) or fuel (i.e., extraction, refining, transport). Chester (2009) provides the first comprehensiv...

  2. Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan, final report

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Weidian

    2013-09-27

    This project, “Building Surface Science Capacity to Serve the Automobile Industry in Southeastern Michigan” was carried out in two phases: (1) the 2009 – 2012 renovation of space in the new EMU Science Complex, which included the Surface Science Laboratory (SSL), a very vigorous research lab at EMU that carries on a variety of research projects to serve the auto and other industries in Michigan; and (2) the 2013 purchase of several pieces of equipment to further enhance the research capability of the SSL. The funding granted by the DoE was proposed to “renovate the space in the Science Complex to include SSL and purchase equipment for tribological and electrochemical impedance measurements in the lab, thus SSL will serve the auto and other industries in Michigan better.” We believe we have fully accomplished the mission.

  3. PTV VISSIM SIMULATION SOFTWARE USE FOR PROFESSIONALS IN «TRANSPORT TECHNOLOGIES» AND «AUTOMOBILE TRANSPORT» SPECIALTIES TRAINING

    Directory of Open Access Journals (Sweden)

    Volodymyr O. Sistuk

    2016-05-01

    Full Text Available The prospect of training quality improving of bachelors and masters in «Automobile transport» and «Transport technologies» specialties was considered, basing on the use of simulation software in the educational process. A review of the software products market was prepared, with the result of the component PTV VISSIM pre-selection. The simulation model of a real crossroad was developed to demonstrate its capabilities. Based on the analysis of application functions aptness to the city transport network complex objects simulation requirements, the expediency of the solution use during vocational certificate credit courses of students of Transport Faculty of Kryvyi Rih National University was grounded.

  4. A hydraulic hybrid propulsion method for automobiles with self-adaptive system

    International Nuclear Information System (INIS)

    Wu, Wei; Hu, Jibin; Yuan, Shihua; Di, Chongfeng

    2016-01-01

    A hydraulic hybrid vehicle with the self-adaptive system is proposed. The mode-switching between the driving mode and the hydraulic regenerative braking mode is realised by the pressure cross-feedback control. Extensive simulated and tested results are presented. The control parameters are reduced and the energy efficiency can be increased by the self-adaptive system. The mode-switching response is fast. The response time can be adjusted by changing the controlling spool diameter of the hydraulic operated check valve in the self-adaptive system. The closing of the valve becomes faster with a smaller controlling spool diameter. The hydraulic regenerative braking mode can be achieved by changing the hydraulic transformer controlled angle. Compared with the convention electric-hydraulic system, the self-adaptive system for the hydraulic hybrid vehicle mode-switching has a higher reliability and a lower cost. The efficiency of the hydraulic regenerative braking is also increased. - Highlights: • A new hybrid system with a self-adaptive system for automobiles is presented. • The mode-switching is realised by the pressure cross-feedback control. • The energy efficiency can be increased with the self-adaptive system. • The control parameters are reduced with the self-adaptive system.

  5. Ergonomic study of biorhythm effect on the 62 occurrence of human errors and accidents in automobile manufacturing industry

    Directory of Open Access Journals (Sweden)

    2012-03-01

    Conclusion: This study showed that the frequency of accidents in critical days and negative section of physical cycle was more than expected. Also the frequency of accidents in critical days and negative section of emotional and intellectual cycle was less than expected. Due to the physical nature of the work activities in the automobile manufacturing industry can be stated that the study showed that in physical work activities, frequency of accidents in critical days and negative section of physical cycle in which the person is not physically ready to do the job was more than expected.

  6. Adaptive Backstepping Sliding-Mode Control of the Electronic Throttle System in Modern Automobiles

    Directory of Open Access Journals (Sweden)

    Rui Bai

    2014-01-01

    Full Text Available In modern automobiles, electronic throttle is a DC-motor-driven valve that regulates air inflow into the vehicle’s combustion system. The electronic throttle is increasingly being used in order to improve the vehicle drivability, fuel economy, and emissions. Electronic throttle system has the nonlinear dynamical characteristics with the unknown disturbance and parameters. At first, the dynamical nonlinear model of the electronic throttle is built in this paper. Based on the model and using the backstepping design technique, a new adaptive backstepping sliding-mode controller of the electronic throttle is developed. During the backstepping design process, parameter adaptive law is designed to estimate the unknown parameter, and sliding-mode control term is applied to compensate the unknown disturbance. The proposed controller can make the actual angle of the electronic throttle track its set point with the satisfactory performance. Finally, a computer simulation is performed, and simulation results verify that the proposed control method can achieve favorable tracking performance.

  7. Automobile tires--a potential source of highly carcinogenic dibenzopyrenes to the environment.

    Science.gov (United States)

    Sadiktsis, Ioannis; Bergvall, Christoffer; Johansson, Christer; Westerholm, Roger

    2012-03-20

    Eight tires were analyzed for 15 high molecular weight (HMW) polycyclic aromatic hydrocarbons (PAH), using pressurized fluid extraction. The variability of the PAH concentrations determined between different tires was large; a factor of 22.6 between the lowest and the highest. The relative abundance of the analytes was quite similar regardless of tire. Almost all (92.3%) of the total extractable PAH content was attributed to five PAHs: benzo[ghi]perylene, coronene, indeno[1,2,3-cd]pyrene, benzo[e]pyrene, and benzo[a]pyrene. The difference in the measured PAH content between summer and winter tires varied substantially across manufacturers, making estimates of total vehicle fleet emissions very uncertain. However, when comparing different types of tires from the same manufacturer they had significantly (p = 0.05) different PAH content. Previously, there have been no data available for carcinogenic dibenzopyrene isomers in automobile tires. In this study, the four dibenzopyrene isomers dibenzo[a,l]pyrene, dibenzo[a,e]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene constituted tires may be a potential previously unknown source of carcinogenic dibenzopyrenes to the environment.

  8. Microscopic Model of Automobile Lane-changing Virtual Desire Trajectory by Spline Curves

    Directory of Open Access Journals (Sweden)

    Yulong Pei

    2010-05-01

    Full Text Available With the development of microscopic traffic simulation models, they have increasingly become an important tool for transport system analysis and management, which assist the traffic engineer to investigate and evaluate the performance of transport network systems. Lane-changing model is a vital component in any traffic simulation model, which could improve road capacity and reduce vehicles delay so as to reduce the likelihood of congestion occurrence. Therefore, this paper addresses the virtual desire trajectory, a vital part to investigate the behaviour divided into four phases. Based on the boundary conditions, β-spline curves and the corresponding reverse algorithm are introduced firstly. Thus, the relation between the velocity and length of lane-changing is constructed, restricted by the curvature, steering velocity and driving behaviour. Then the virtual desire trajectory curves are presented by Matlab and the error analysis results prove that this proposed description model has higher precision in automobile lane-changing process reconstruction, compared with the surveyed result. KEY WORDS: traffic simulation, lane-changing model, virtual desire trajectory, β-spline curves, driving behaviour

  9. Direct strain energy harvesting in automobile tires using piezoelectric PZT–polymer composites

    International Nuclear Information System (INIS)

    Van den Ende, D A; Van de Wiel, H J; Groen, W A; Van der Zwaag, S

    2012-01-01

    Direct piezoelectric strain energy harvesting can be used to power wireless autonomous sensors in environments where low frequency, high strains are present, such as in automobile tires during operation. However, these high strains place stringent demands on the materials with respect to mechanical failure or depolarization, especially at elevated temperatures. In this work, three kinds of ceramic–polymer composite piezoelectric materials were evaluated and compared against state-of-the-art piezoelectric materials. The new composites are unstructured and structured composites containing granular lead zirconate titanate (PZT) particles or PZT fibers in a polyurethane matrix. The composites were used to build energy harvesting patches which were attached to a tire and tested under simulated rolling conditions. The energy density of the piezoelectric ceramic–polymer composite materials is initially not as high as that of the reference materials (a macro-fiber composite and a polyvinylidene fluoride polymer). However, the area normalized power output of the composites after temperature and strain cycling is comparable to that of the reference devices because the piezoelectric ceramic–polymer composites did not degrade during operation. (paper)

  10. Simulation of press-forming for automobile part using ultra high tension steel

    Directory of Open Access Journals (Sweden)

    Tanabe I.

    2012-08-01

    Full Text Available In recent years, ultra high tension steel has gradually been used in the automobile industry. The development of press-forming technology is now essential by reason of its high productivity and high product quality. In this study, tensile tests were performed with a view to understanding the material properties. Press-forming tests were then carried out with regard to the behaviors of spring back and deep-drawability, and manufacturing a real product. The ultra high tension steel used in the experiments had a thickness of 1 mm and a tensile strength of 1000 MPa. Finally, simulations of spring back, deep-drawability and manufacturing a real product in ultra high tension steel were conducted and evaluated in order to calculate the optimum-press-forming conditions and the optimum shape of the die. FEM with non-linear and dynamic analysis using Euler-Lagrange’s element was used for the simulations. It is concluded from the results that (1 the simulations conformed to the results of the experiments (2 the simulations proved very effective for calculating the optimum press conditions and die shape.

  11. 17. Aachen colloquium automobile and engine technology. Proceedings; 17. Aachener Kolloquium Fahrzeug- und Motorentechnik. Kolloquiumsband

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    The Proceedings of the '17th Aachener Colloquium - Automobile and Engine Tecnology', held 6. - 8.October 2008 in Aachen/Germany, contains effectively 104 papers. These contributions deal with the following main subjects:new diesel engines I and II; hybrids I and II; CAE-methods; friction estimation by sensor fusion; ADAS for increased traffic safety I and II; new spark ignition engines I-III; exhausat aftertreatment diesel engines; FVV-project reports; integrated chassis control systems; driver assistance in commercial vehicles; si engines with alternative fuels; engine acoustics; steering systems I and II; detection traffic environment for ADAS; combustion concepts EGR and VVT; engine mechanics; development of safe vehicle systems; supercharging - downsizing; emission concepts diesel engines I and II; automotive strategy concepts; suspension systems; vehicle development; integrated safety;chasis systems. (org.)

  12. Achievement report on the research on possibility of expanding application of information technology to automobile production line; Jidosha seisan kotei eno joho tsushin gijutsu tekiyo kakudai kanosei ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Before submitting propositions on important technological tasks to be generated in the automobile production line upon application of IT (information technology), a questionnairing is implemented to know the actualities of the line for the purpose of planning a proper merger of IT and the manufacturing technology development capability of the IT accepting site. The questionnaire, aiming at the embodiment of the goals of the projects 'IT related technical tasks relative to its helping human creation of new technologies and enhancement of human ability to make improvement' and 'Technical tasks of developing technical skills into technologies,' asks engineers about the actualities of knowhow at automobile production lines and its development into technologies, about how they take care of what they learned from their predecessors, and about their expectations from and views and opinions toward IT introduction and utilization. It is important to efficiently utilize IT as a means to solve problems involving the knowhow related training on the production line and the handing down of the acquired knowhow to the juniors. Since individual workers' knowhow assumes a certain role at each stage of the automobile production line and since it is necessary to extract the maximum from each worker and to utilize the fruit for improvement on productivity and work efficiency, it is indispensable to efficiently merge the knowhow with IT. (NEDO)

  13. Estimation of Gasoline Price Elasticities of Demand for Automobile Fuel Efficiency in Korea: A Hedonic Approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sung Tae [Sungkyunkwan University, Seoul (Korea); Lee, Myunghun [Keimyung University, Taegu (Korea)

    2001-03-01

    This paper estimates the gasoline price elasticities of demand for automobile fuel efficiency in Korea to examine indirectly whether the government policy of raising fuel prices is effective in inducing less consumption of fuel, relying on a hedonic technique developed by Atkinson and Halvorsen (1984). One of the advantages of this technique is that the data for a single year, without involving variation in the price of gasoline, is sufficient in implementing this study. Moreover, this technique enables us to circumvent the multicollinearity problem, which had reduced reliability of the results in previous hedonic studies. The estimated elasticities of demand for fuel efficiency with respect to the price of gasoline, on average, is 0.42. (author). 30 refs., 3 tabs.

  14. A comparative study of the effect of automobile pollution on pulmonary function tests of exposed cab drivers

    Directory of Open Access Journals (Sweden)

    Amrith Pakkala

    2013-01-01

    Full Text Available Background: Urbanization is associated with an enormous increase in vehicular traffic emitting exhausts and polluting the atmosphere. Emissions from vehicular traffic constitute the most significant source of ultraparticle in an urban environment. Cab drivers who work near areas located in the vicinity of traffic junctions through which maximum number of vehicles passes are more prone to develop health issues pertaining to the respiratory system. The effect of this occupational hazard in this unorganised workforce is not adequately studied. This study is designed to determine the effect of air pollution on the pulmonary system in cab drivers exposed to automobile exhaust. Materials and Methods: This study was conducted by performing pulmonary function tests (PFTs on 20 cab drivers who are exposed to automobile exhaust by virtue of their work venue nearer to traffic junctions and comparing them with 20 age, gender-matched, and anthropometric profile cab drivers who work in a rural setting free from vehicular air pollution. PFT by computerized spirometer measuring forced vital capacity (FVC, forced expiratory volume (FEV 1 , FEV1/FVC, peak expiratory flow rate (PEFR, and forced expiratory flow (FEF 25%-75% were measured. Statistical analysis was done by Student′s t test (two-tailed, independent for intergroup analysis. Results: There was a statistically significant decline in dynamic pulmonary function parameters in the study group when compared. FVC, FEV in first second, PEFR, FEV 1 /FVC, and FEF 25%-75% were all found to be statistically significantly lower in cab drivers as compared to control group (P < 0.001. Conclusion: This study finds a significant decline in various PFT parameters recorded in the study group as compared with the control group. These suggests a tendency for obstructive lung disease among cab drivers exposed to a polluted urban environment.

  15. On the baseline evolution of automobile fuel economy in Europe

    International Nuclear Information System (INIS)

    Zachariadis, Theodoros

    2006-01-01

    'Business as usual' scenarios in long-term energy forecasts are crucial for scenario-based policy analyses. This article focuses on fuel economy of passenger cars and light trucks, a long-disputed issue with serious implications for worldwide energy use and CO 2 emissions. The current status in Europe is explained and future developments are analysed with the aid of historical data of the last three decades from the United States and Europe. As a result of this analysis, fuel economy values are proposed for use as assumptions in baseline energy/transport scenarios in the 15 'old' European Union Member States. Proposed values are given for new gasoline and diesel cars and for the years 2010, 2020 and 2030. The increasing discrepancy between vehicle fuel consumption measured under test conditions and that in the real world is also considered. One main conclusion is that the European Commission's voluntary agreement with the automobile industry should not be assumed to fully achieve its target under baseline conditions, nor should it be regarded as a major stimulus for autonomous vehicle efficiency improvements after 2010. A second conclusion is that three very recent studies enjoying authority across the EU tend to be overly optimistic as regards the technical progress for conventional and alternative vehicle propulsion technologies under 'business as usual' conditions

  16. Optimization of Thermoelectric Components for Automobile Waste Heat Recovery Systems

    Science.gov (United States)

    Kumar, Sumeet; Heister, Stephen D.; Xu, Xianfan; Salvador, James R.

    2015-10-01

    For a typical spark ignition engine approximately 40% of available thermal energy is lost as hot exhaust gas. To improve fuel economy, researchers are currently evaluating technology which exploits exhaust stream thermal power by use of thermoelectric generators (TEGs) that operate on the basis of the Seebeck effect. A 5% improvement in fuel economy, achieved by use of TEG output power, is a stated objective for light-duty trucks and personal automobiles. System modeling of thermoelectric (TE) components requires solution of coupled thermal and electric fluxes through the n and p-type semiconductor legs, given appropriate thermal boundary conditions at the junctions. Such applications have large thermal gradients along the semiconductor legs, and material properties are highly dependent on spatially varying temperature profiles. In this work, one-dimensional heat flux and temperature variations across thermoelectric legs were solved by using an iterative numerical approach to optimize both TE module and TEG designs. Design traits were investigated by assuming use of skutterudite as a thermoelectric material with potential for automotive applications in which exhaust gas and heat exchanger temperatures typically vary from 100°C to over 600°C. Dependence of leg efficiency, thermal fluxes and electric power generation on leg geometry, fill fractions, electric current, thermal boundary conditions, etc., were studied in detail. Optimum leg geometries were computed for a variety of automotive exhaust conditions.

  17. Evaluation of Physico-Chemical and Fungal Species Associated with Oil Contaminated Soil from Selected Automobile Garage in Sokoto Metropolis

    Directory of Open Access Journals (Sweden)

    Hassan Muhammad Maishanu

    2018-03-01

    Full Text Available This study was conducted with a view to evaluating the physicochemical and mycological properties of different oil contaminated soils collected from three different automobile garages in Sokoto Metropolis, and uncontaminated soil from the temporary site, Usmanu Danfodiyo University, Sokoto (UDUS was used as the control. The pH was determined using pH meter model Hanna (H1991301, quantity of mineral elements was evaluated in accordance with Murphy and Fungi were isolated from the three oil contaminated samples (A, B. and C and the uncontaminated (sample D as control, this was done by standard procedure using the method of P. Ren, T. Jankun & B. Leaderer. The physical, chemical, and mineral elements from the oil-contaminated soils of the three automobile garages and control. The results of particle soil analysis revealed the high content of sandy soil (96.2 to 87.3 and silt is the lowest with (2.5–0.6. Magnesium had the highest concentration of studied minerals, ranging from 193 to 649.2 mg/kg. while PH result revealed that the soil samples were pH value ranged from (16.85–16.20 in oil Contaminated samples, while the control had 15.90, and electrical conductivity ranged from 12.8–13.8 % and 28 % in control, four fungal isolates Aspergillus sp., Penicillum sp., Mucor sp. and Sporobolomyces sp. were identified based on colonial, sexual and morphological characteristics. These fungal strains can be used in bioremediation process and oil pollution reduction in aquatic ecosystems.

  18. Effets des dispositifs organisationnels sur la gestion « individuel / collectif » : le cas des vendeurs automobiles de deux concessions

    OpenAIRE

    Gilson , Adeline

    2004-01-01

    Cette étude comparative interroge le lien entre logiques d'actions individuelles et collectives, a priori antinomiques, auprès de commerciaux du secteur automobile. L'appropriation des clients, les stratégies de fidélisation dans son intérêt propre, la conception de l'acte de vente comme central dans la relation de service sont autant d'éléments qui confirment l'individualisme du métier de vendeur dont le travail reste toutefois intimement lié au reste de l'organisation. Cette tension potenti...

  19. Présence de la publicité automobile dans la presse écrite belge : Analyse des quotidiens La Libre Belgique et Le Soir et des hebdomadaires Trends-Tendances et Le Vif-L’Express

    Directory of Open Access Journals (Sweden)

    Pierre Ozer

    2008-06-01

    Full Text Available De plus en plus, les aspects relatifs à l’environnement, et plus singulièrement au réchauffement climatique, prennent une place de choix dans le traitement de l’information par les médias. Bien sûr, le lien entre changement climatique et hivers sans neige, inondations dites exceptionnelles, ouragans dévastateurs ou canicules estivales s’invite en manchette des quotidiens et des hebdomadaires. Mais en plus, le concept de « global warming » revient systématiquement au devant de la scène car il est devenu un enjeu sociétal, environnemental et économique. Ainsi, la presse écrite interpelle-t-elle ses lecteurs à être conscients de cette problématique mais également acteurs dans ce domaine. La presse tend dès lors à nous interpeller, et c’est tout à son honneur, par rapport aux « bonnes pratiques » pour freiner notre débauche énergétique et propose des alternatives, le plus souvent peu contraignantes. Souvent, le choix d’une automobile « propre » apparaît comme une alternative. Mais, par rapport à l’automobile, la presse écrite est-elle cohérente avec le discours qu’elle pose sur papier et l’acte qu’elle promeut au travers des publicités qu’elle autorise de publier ? L’objectif de ce papier est dès lors d’apporter une réponse aux questions suivantes : 1] Quelle est la place de la publicité pour les automobiles dans la presse écrite ; 2] Quelles sont les émissions promues dans ces publicités par rapport aux objectifs à atteindre ; 3] Quelles pourraient être les solutions à cette problématique. Une analyse minutieuse des publicités pour les automobiles a été réalisée durant l’année 2006 dans quatre médias de la presse écrite belge francophone. Il ressort de cet examen que les publicités vantent des véhicules automobiles qui, du point de vue émissions de CO2/km, sont d’un autre âge et sont clairement en contradiction avec les valeurs prônées dans les articles de

  20. Fuel cells and hydrogen : implications for the future automobile

    Energy Technology Data Exchange (ETDEWEB)

    Frise, P.R. [Auto 21 Network of Centres of Excellence, Windsor, ON (Canada)

    2006-07-01

    This presentation outlined the organization of the auto industry, with reference to the tier levels of the supply chain. Automakers or original equipment manufacturers (OEMs) such as Daimler Chrysler, Ford Motor Company, General Motors, Honda, Toyota and Nissan are at the top of the structure, followed by tier 1 suppliers, tier 2 suppliers and tier 3 companies. In recent years, the auto industry has experienced an explosion of new products, building more vehicle types with fewer plants. It was shown that since 1990, auto parts supply companies have consolidated. Currently, Canada's automotive sector is the world's eighth largest producer of motor vehicles. The 6 OEMs operate 12 active assembly plants in Canada plus several engine and drivetrain part plants and support facilities. More than 500,000 Canadians work directly and indirectly in the auto industry, which generates 12 to 13 per cent of Canada's gross domestic product. It was noted that automotive design is driven, in large part, by energy prices. The industry strives to make vehicles safer; improve fuel economy and reduce environmental impacts; and, re-tool the business model by improving supplier relationship and making assembly more efficient and safer in order to control cost and improve profitability. The challenges for the new automobile include new powertrains that use alternate fuels or have electric drive and control systems; new structures and materials; and, new systems and capabilities. The future of fuel cell powertrains was also discussed with reference to prototypes or products already in the market. tabs., figs.

  1. Deinococcus aluminii sp. nov., isolated from an automobile air conditioning system.

    Science.gov (United States)

    Kim, Dong-Uk; Lee, Hyosun; Lee, Suyeon; Park, Sooyeon; Yoon, Jung-Hoon; Zhao, Lei; Kim, Min-Kyu; Ahn, Jae-Hyung; Ka, Jong-Ok

    2018-01-16

    A Gram-stain-positive and pale pink-pigmented bacterial strain, designated ID0501 T , was isolated from an automobile evaporator core collected in the Republic of Korea. The cells were aerobic and coccoidal. The strain grew at 15-40 ˚C (optimum, 37 ˚C), at pH 6.0-7.0 (optimum, pH 6.5), and in the presence of 0-1.5 % (w/v) NaCl. Phylogenetically, the strain was related to members of the genus Deinococcus and showed the highest sequence similarity, of 96.9 %, with Deinococcus metallilatus MA1002 T . The major fatty acids of the strain were iso-C17 : 0, iso-C15 : 0 and iso-C13 : 0. The predominant respiratory quinone was MK-8. The polar lipids profile revealed the presence of phosphatidylethanolamine, phosphatidylglycerol, phosphatidylcholine, diphosphatidylglycerol, unidentified phospholipids, an unidentified aminolipid and unidentified glycolipids. The DNA G+C content of the strain was 68.3 mol%. On the basis of phenotypic, genotypic and chemotaxonomic data, strain ID0501 T represents a novel species of the genus Deinococcus, for which the name Deinococcusaluminii sp. nov. (=KACC 19286 T =NBRC 112889 T ) is proposed.

  2. Electron beam induced purification of dilute off gases from industrial processes and automobile tunnels

    International Nuclear Information System (INIS)

    Paur, H.-R.; Maetzing, H.

    1993-01-01

    The electron beam process has proved to be an efficient method for the removal of inorganic pollutants from flue gas. Since it simulates natural processes which occur in the atmospheric photochemistry, it appeared attractive to investigate the potential of the e-beam process to clean off-gases which contain hydrocarbon and inorganic trace components. Such emissions arise from industrial processes and from automobile tunnels. Commercial solvents were vaporized in air and irradiated with energetic electrons (300 keV). CO, CO 2 and aerosol particles were found as products and were determined quantitatively. The aerosol particles can be collected by a gravel bed filter and can be removed by combustion or biological degradation. From experiments and model calculations it was found that the e-beam process is a very economic tool to remove hydrocarbons from large off-gas volumes at initial concentrations of 50-100 mg C/m 3 , and that NO x can be removed very efficiently from tunnel off-gas. (author)

  3. Calculation of the Thermal Loading of the Cylinder-Piston Group of the Automobile Engine

    Science.gov (United States)

    Barchenko, F. B.; Bakulin, V. N.

    2017-05-01

    We propose a mathematical model for calculating thermal loods of parts of the cylinder-piston group of the automobile engine operating under unstable conditions in its complete life cycle. Methods have been described for calculating the boundary conditions to determine the thermal state of the parts of the cylinder-piston group of such an engine with the use of theoretical formulas, empirical and semiempirical relations, and tabulated data. In modeling, we calculated the work of all systems of the engine (pumps, pipelines, heat exchangers) influencing directly or indirectly the thermal state of its cylinder-piston group. The nonstationary thermal state was calculated once in the operating cycle of the engine with the use of the cycle-averaged values of the local heat transfer coefficients and the resulting temperature of the medium. The personal computer counting time for one time step of a transport diesel engine of typical design with a number of units of the order of 500 was 5 s.

  4. Automobiles: Possible sources of metals other than lead in the urban atmosphere

    International Nuclear Information System (INIS)

    Xudong Huang; Keskin, S.S.; Olmez, I.; Gordon, G.E.

    1992-01-01

    At present, due to the lack of specific marker species and reliable source composition libraries for motor vehicle emissions, it is almost impossible to predict their impact on the urban atmosphere. During the last 2 yr, the authors have been performing an extensive program to identify specific inorganic tracers for recently manufactured automobiles to create a new source composition library. Initially, they speculated on the possibility of using rare earth element (REE) emissions from the modern catalytic converters. Their preliminary studies and Japanese studies indicated a substantial release of light REE from the exhausts of unleaded gasoline-powered autos. The present study, however, has shown that although REEs are emitted, their importance as a marker is minimal. Although they have analyzed numerous samples collected from test facilities, tunnels, and ambient aerosols, they present only the results of individual motor vehicle studies. Samples were collected from the exhaust of 52 passenger cars and minivans of domestic and foreign origin. All samples collected were analyzed by instrumental neutron activation analysis (INAA). The INAA results have shown that in addition to REEs, substantial amounts of other elements (sodium, magnesium, aluminum, potassium, manganese, iron, zinc, arsenic, bromine, antimony, etc.) were also emitted

  5. The use of heteroduplex analysis of polymerase chain reaction products to support the possible transmission of Legionella pneumophila from a malfunctioning automobile air conditioner.

    Science.gov (United States)

    Pinar, Ahmet; Ramirez, Julio A; Schindler, Laura L; Miller, Richard D; Summersgill, James T

    2002-03-01

    Air conditioner condensates have not been previously associated with cases of Legionnaires' disease. We report the possible transmission of Legionella pneumophila serogroup 1 from a malfunctioning automobile air conditioning system's leaking water onto the floorboard of a car driven for a long distance by the patient. Heteroduplex analysis of polymerase chain reaction products was used to help establish an epidemiologic link between the water specimen and the patient.

  6. Long term effects of exposure to automobile exhaust on the pulmonary function of female adults in Tokyo, Japan

    Science.gov (United States)

    Sekine, K; Shima, M; Nitta, Y; Adachi, M

    2004-01-01

    Aims: To investigate the chronic effects of air pollution caused mainly by automobiles in healthy adult females. Methods: Respiratory symptoms were investigated in 5682 adult females who had lived in the Tokyo metropolitan area for three years or more in 1987; 733 of them were subjected to pulmonary function tests over eight years from 1987 to 1994. The subjects were divided into three groups by the level of air pollution they were exposed to during the study period. The concentrations of nitrogen dioxide and suspended particulate matter were the highest in group 1, and the lowest in group 3. Results: The prevalence rates of respiratory symptoms in group 1 were higher than those in groups 2 and 3, except for wheezing. Multiple logistic regression analysis showed significant differences in persistent phlegm and breathlessness. The subjects selected for the analysis of pulmonary function were 94, 210, and 102 females in groups 1, 2, and 3, respectively. The annual mean change of FEV1 in group 1 was the largest (-0.020 l/y), followed by that in group 2 (-0.015 l/y), and that in group 3 (-0.009 l/y). Testing for trends showed a significant larger decrease of FEV1 with the increase in the level of air pollution. Conclusions: The subjects living in areas with high levels of air pollution showed higher prevalence rates of respiratory symptoms and a larger decrease of FEV1 compared with those living in areas with low levels of air pollution. Since the traffic density is larger in areas with high air pollution, the differences among the groups may reflect the effect of air pollution attributable to particulate matter found in automobile exhaust. PMID:15031394

  7. Pulmonary function abnormalities and airway irritation symptoms of metal fumes exposure on automobile spot welders.

    Science.gov (United States)

    Luo, Jiin-Chyuan John; Hsu, Kuang-Hung; Shen, Wu-Shiun

    2006-06-01

    Spot or resistance welding has been considered less hazardous than other types of welding. Automobile manufacturing is a major industry in Taiwan. Spot and arc welding are common processes in this industry. The respiratory effects on automobile spot welders exposed to metal fumes are investigated. The cohort consisted of 41 male auto-body spot welders, 76 male arc welders, 71 male office workers, and 59 assemblers without welding exposure. Inductivity Coupled Plasma Mass Spectrophotometer (ICP-MS) was applied to detect metals' (zinc, copper, nickel) levels in the post-shift urine samples. Demographic data, work history, smoking status, and respiratory tract irritation symptoms were gathered by a standard self-administered questionnaire. Pulmonary function tests were also performed. There were significantly higher values for average urine metals' (zinc, copper, nickel) levels in spot welders and arc welders than in the non-welding controls. There were 4 out of 23 (17.4%) abnormal forced vital capacity (FVC) among the high-exposed spot welders, 2 out of 18 (11.1%) among the low-exposed spot welders, and 6 out of 130 (4.6%) non-welding-exposed workers. There was a significant linear trend between spot welding exposure and the prevalence of restrictive airway abnormalities (P = 0.036) after adjusting for other factors. There were 9 out of 23 (39.1%) abnormal peak expiratory flow rate (PEFR) among high-exposed spot welders, 5 out of 18 (27.8%) among the low-exposed spot welders, and 28 out of 130 (21.5%) non-welding-exposed workers. There was a borderline significant linear trend between spot welding exposure and the prevalence of obstructive lung function abnormalities (P = 0.084) after adjusting for other factors. There was also a significant dose-response relationship of airway irritation symptoms (cough, phlegm, chronic bronchitis) among the spot welders. Arc welders with high exposure status also had a significant risk of obstructive lung abnormalities (PEFR

  8. [Investigation of occupational noise exposure and hearing loss in large automobile manufacturing enterprise during 2006-2010 in Guangzhou, China].

    Science.gov (United States)

    Zhao, Yuan; Zhou, Hao; Li, Yanhua; Xiao, Lvwu; Wu, Lin; Du, Weijia; Liu, Yimin

    2014-02-01

    To analyze the relationship between occupational noise exposure and hearing loss among workers in large automobile manufacturing enterprise during 2006-2010 in Guangzhou, China. A retrospective cohort study was conducted. The subjects were divided into noise exposure group and control group. Their hearing examination results and noise exposure levels in different workplaces were collected during 2006-2010, and the relationship between noise exposure in workplaces and hearing loss was analyzed. The incidence of hearing loss for the noise exposure group was 9.34%, versus 2.75% for the control group; the noise exposure group had a significantly higher risk of hearing loss than the control group (R = 3.378, 95%CI = 1.467∼ 9.083). The noise intensity and over-limit rate were significantly higher in the stamping, welding, and general assembly workshops than in other workshops. The risk of hearing loss significantly increased with years of noise exposure in 80, 85, and 90 dB (A) groups (χ(2) = 6.377, P = 0.041; χ(2) = 8.570, P = 0.014; χ(2) = 7.037, P = 0.030). The risk of hearing loss also increased with noise intensity in all working age groups (χ(2) = 5.068, P = 0.024; χ(2) = 71.497, P hearing loss in workers. The incidence of hearing loss increases with the noise intensity in workplaces and years of noise exposure. The noise exposure level and incidence of hearing loss are higher in the stamping workshop than in other workshops. Controlling the noise intensity in automobile manufacturing enterprise may reduce the risk of hearing loss in workers.

  9. Research and application of online measurement system of tire tread profile in automobile tire production

    Science.gov (United States)

    Wang, Pengyao; Chen, Xiangguang; Yang, Kai; Liu, Xuejiao

    2017-01-01

    To improve the measuring efficiency of width and thickness of tire tread in the process of automobile tire production, the actual condition for the tire production process is analyzed, and a fast online measurement system based on moving tire tread of tire specifications is established in this paper. The coordinate data of tire tread profile is acquired by 3D laser sensor, and we use C# language for programming which is an object-oriented programming language to complete the development of client program. The system with laser sensor can provide real-time display of tire tread profile and the data to require in the process of tire production. Experimental results demonstrate that the measuring precision of the system is <= 1mm, it can meet the measurement requirements of the production process, and the system has the characteristics of convenient installation and testing, system stable operation.

  10. Optimum design of automobile seat using statistical design support system; Tokeiteki sekkei shien system no jidoshayo seat eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Kashiwamura, T [NHK Spring Co. Ltd., Yokohama (Japan); Shiratori, M; Yu, Q; Koda, I [Yokohama National University, Yokohama (Japan)

    1997-10-01

    The authors proposed a new practical optimum design method called statistical design support system, which consists of five steps: the effectivity analysis, reanalysis, evaluation of dispersion, the optimiza4ion and evaluation of structural reliability. In this study, the authors applied the present system to analyze and optimum design of an automobile seat frame subjected to crushing. This study should that the present method could be applied to the complex nonlinear problems such as large deformation, material nonlinearity as well as impact problem. It was shown that the optimum design of the seat frame has been solved easily using the present system. 6 refs., 5 figs., 5 tabs.

  11. Operating cycle resolved modelling and hardware-in-the-loop-simulation of diesel engines of automobiles with turbocharging; Arbeitsspielaufgeloeste Modellbildung und Hardware-in-the-Loop-Simulation von Pkw-Dieselmotoren mit Abgasturboaufladung

    Energy Technology Data Exchange (ETDEWEB)

    Zahn, Sebastian

    2012-11-01

    Model-based and simulation-based approaches increasingly are used in the process of software development and function development for automobile control devices in order to reduce the development time as well as to save test-stand trials. The author of the contribution under consideration reports on the design of a dynamic model of a diesel engine for the hardware-in-the-loop test environment. The development, the test and pre-application of modern engine control units of automobiles with a cylinder-based combustion control is in the focus of the model application. The developed real-time model of the engine consists of a air pathway model, an exhaust gas pathway model, a VTG turbocharger model, a model of the cylinder group as well as an emission model. The parametrization of the engine model requires a continuous setting method. The model is validated by means of stationary and dynamic measured data of the engine test stand.

  12. Determination of minimum sample size for fault diagnosis of automobile hydraulic brake system using power analysis

    Directory of Open Access Journals (Sweden)

    V. Indira

    2015-03-01

    Full Text Available Hydraulic brake in automobile engineering is considered to be one of the important components. Condition monitoring and fault diagnosis of such a component is very essential for safety of passengers, vehicles and to minimize the unexpected maintenance time. Vibration based machine learning approach for condition monitoring of hydraulic brake system is gaining momentum. Training and testing the classifier are two important activities in the process of feature classification. This study proposes a systematic statistical method called power analysis to find the minimum number of samples required to train the classifier with statistical stability so as to get good classification accuracy. Descriptive statistical features have been used and the more contributing features have been selected by using C4.5 decision tree algorithm. The results of power analysis have also been verified using a decision tree algorithm namely, C4.5.

  13. Design of Nonwoven Carpets to Upgrade Sound Isolation Features in Automobiles

    Directory of Open Access Journals (Sweden)

    Atakan Raziye

    2014-12-01

    Full Text Available With the increases of the expected properties of textile products, better and advanced new designs are being created. Textiles used in vehicles are increasing, and the current performance of the expectations bar is determined by automobile manufacturers. While meeting the expectations of users in the vehicle mechanically, but also disturbing the user during operation of the mechanical properties of this ratio should be minimized. This study was intended to minimize sound transmission of nonwoven textile components, which are used in cars as silencer parts. For that purpose, four different models were developed in this study. First model consists of three designs for baggage carpets. Second model has six designs for floor coverings. Third model comprises two designs inner dash felt and finally fourth model includes two designs of hood liners. The acoustical absorption coefficients and transmission loss of these carpets were tested and evaluated in the frequency range of 16-6300 Hz. The measurements demonstrated that nonwoven layer is a very significant and effective part of a carpet due to its contribution in the sound isolation. With this study, it has been determined which layer has better performance on sound absorption and transmission loss among different carpet types. A combination of heavy layer and nonwoven layer carpets is found to be benefit for noise and sound insulation.

  14. Spirosoma carri sp. nov., isolated from an automobile air conditioning system.

    Science.gov (United States)

    Kim, Dong-Uk; Lee, Hyosun; Lee, Suyeon; Park, Sooyeon; Yoon, Jung-Hoon; Park, So Yoon; Ka, Jong-Ok

    2017-10-01

    A Gram-stain-negative and yellow-pigmented bacterial strain, designated TX0406 T , was isolated from an automobile evaporator core collected in Korea. The cells were non-motile, aerobic and rod-shaped. The strain grew at 15-37 °C (optimum, 25 °C), at pH 6.0-7.0 (optimum, 6.5) and in the presence of 0-1.5 % (w/v) NaCl. Phylogenetically, the strain was related to members of the genus Spirosoma(93.7-90.7 % 16S rRNA sequence similarities) and showed the highest sequence similarity of 93.7 % to Spirosomapulveris JSH5-14 T . The major fatty acids of the strain were summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c), C16 : 1ω5c and C16 : 0. The predominant menaquinone was MK-7. The polar lipid profile revealed the presence of phosphatidylethanolamine, an unidentified aminolipid, unidentified aminophospholipids and unidentified lipids. The DNA G+C content of the strain was 58.7 mol%. Based on phenotypic, genotypic and chemotaxonomic data, strain TX0406 T represents a novel species in the genus Spirosoma, for which the name Spirosoma carri sp. nov. (=KACC 19013 T =NBRC 112494 T ) is proposed.

  15. Effect of automobile pollution on chlorophyll content of roadside urban trees

    Directory of Open Access Journals (Sweden)

    M. Iqbal

    2015-09-01

    Full Text Available The effect of automobile pollution was determined on chlorophyll content of four different tree species viz. Azadirachta indica L., Conocarpus erectus L., Guiacum officinale L.and Eucalyptus sp. growing along the roads of the city.  Significant changes in the level of chlorophyll “a”, chlorophyll “b” and total chlorophyll “a+b” were found in the leaves of four tree species (A. indica, C. erectus, G.officinale and Eucalyptus sp. collected from polluted sites (Airport, Malir Halt, Quaidabad as compared to control site (Karachi University Campus. Lowest concentration of chlorophyll “a”, chlorophyll “b” and chlorophyll “a+b” was recorded in the leaf samples of all tree species collected from Quaidabad site when compared with the leaf samples collected from control site. The highest levels of chlorophyll pigment were recorded in all tree species leave samples collected from Karachi University Campus.  Similarly, better levels of chlorophyll “a”, chlorophyll “b” and total chlorophyll “a+b” was observed in all tree species growing at Airport site as compared to plants growing at Malir Halt and Quaidabad sites.  This study clearly indicated that the vehicular activities induced air pollution problem and affected on the level of chlorophyll pigments in trees which were exposed to road side pollution.

  16. Analysis of trace elements in ceramic prints on automobile glasses for forensic examination using high-energy synchrotron radiation x-ray fluorescence spectrometry

    International Nuclear Information System (INIS)

    Nishiwaki, Yoshinori; Takatsu, Masahisa; Miyamoto, Naoki; Watanabe, Seiya; Shimoda, Osamu; Muratsu, Seiji; Nakanishi, Toshio; Nakai, Izumi

    2007-01-01

    This study revealed that high-energy SRXRF (synchrotron radiation X-ray fluorescence spectrometry) utilizing 75.5 keV X-rays of SPring-8 is a powerful technique for trace elemental analysis of ceramic prints on automotive glasses for forensic examination. Fragments of 99 ceramic prints were collected from automobiles of various manufacturers, types and model years. Their major heavy element-components were found to be either Pb or Bi. Because of recent environment protection movement for lead-free material, there was a tendency of the shift of material from the Pb Type to the Bi Type with years of the production. A utilization of 75.5 keV X-rays as excitation source allowed us to detect trace heavy-elements, such as Sb, La, Ce, Hf and W, as well as relatively light-elements, such as V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Zr and Mo, in samples using K series of XRF emission lines. XRF intensities of these elements normalized by those of the major heavy-elements (Pb or Bi) became characteristic finger prints, showing the identity of each sample with a size of less than 0.5x0.5 mm 2 . The mean relative standard deviations of the normalized XRF intensities measured for the three fragments of each sample were less than 9.3%. These results show that the ceramic prints on automobile glasses contain rich elemental information for discrimination, and therefore the materials can be important evidence for practical forensic examinations. (author)

  17. Synergistic effect of Brønsted acid and platinum on purification of automobile exhaust gases.

    Science.gov (United States)

    Fu, Wei; Li, Xin-Hao; Bao, Hong-Liang; Wang, Kai-Xue; Wei, Xiao; Cai, Yi-Yu; Chen, Jie-Sheng

    2013-01-01

    The catalytic purification of automobile exhaust gases (CO, NOx and hydrocarbons) is one of the most practiced conversion processes used to lower the emissions and to reduce the air pollution. Nevertheless, the good performance of exhaust gas purification catalysts often requires the high consumption of noble metals such as platinum. Here we report that the Brønsted acid sites on the external surface of a microporous silicoaluminophosphate (SAPO) act as a promoter for exhaust gas purification, effectively cutting the loading amount of platinum in the catalyst without sacrifice of performance. It is revealed that in the Pt-loaded SAPO-CHA catalyst, there exists a remarkable synergistic effect between the Brønsted acid sites and the Pt nanoparticles, the former helping to adsorb and activate the hydrocarbon molecules for NO reduction during the catalytic process. The thermal stability of SAPO-CHA also makes the composite catalyst stable and reusable without activity decay.

  18. Evaluation of workers' exposure to methylene diphenyl diisocyanate (MDI) in an automobile manufacturing company, Iran.

    Science.gov (United States)

    Kakooei, Hossein; Shahtaheri, Seyed Jamaleddin; Karbasi, Hossein-Ali

    2006-01-01

    Evaluation of personal inhalation exposure to methylene diphenyl diisocyanate (MDI) among 39 employees, working in the window fixation and window glue processes in an automobile manufacturing company was performed. This study was conducted for both case and control groups. After sampling and sample preparation processes, MDI was determined with a UV-VIS spectrophotometer at 590 nm; the lung function was assessed with a digital spirometer, too. The average concentration of MDI in the window fixation, and window glue workplaces were 34.53 and 27.37 micro g/m3, respectively, which was lower than the threshold limit value (TLV) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) (51 micro g/m3). Respiratory symptoms in the exposed group were significantly different compared to the unexposed group (p < .05). Lung capacities in the case group were lower than in the control group (p < .05). Therefore, MDI can be easily measured making it possible to evaluate the adverse effects caused by occupational exposure.

  19. Synergistic effect of Brønsted acid and platinum on purification of automobile exhaust gases

    Science.gov (United States)

    Fu, Wei; Li, Xin-Hao; Bao, Hong-Liang; Wang, Kai-Xue; Wei, Xiao; Cai, Yi-Yu; Chen, Jie-Sheng

    2013-01-01

    The catalytic purification of automobile exhaust gases (CO, NOx and hydrocarbons) is one of the most practiced conversion processes used to lower the emissions and to reduce the air pollution. Nevertheless, the good performance of exhaust gas purification catalysts often requires the high consumption of noble metals such as platinum. Here we report that the Brønsted acid sites on the external surface of a microporous silicoaluminophosphate (SAPO) act as a promoter for exhaust gas purification, effectively cutting the loading amount of platinum in the catalyst without sacrifice of performance. It is revealed that in the Pt-loaded SAPO-CHA catalyst, there exists a remarkable synergistic effect between the Brønsted acid sites and the Pt nanoparticles, the former helping to adsorb and activate the hydrocarbon molecules for NO reduction during the catalytic process. The thermal stability of SAPO-CHA also makes the composite catalyst stable and reusable without activity decay. PMID:23907148

  20. Risk assessment of welders` exposure to total fume in an automobile industry

    Directory of Open Access Journals (Sweden)

    2012-01-01

    Full Text Available Introduction: Risk assessment of Toxic or hazardous chemicals enables the Industrial Hygienists to make the appropriate decision in providing healthy work place. This project was conducted in an assembling plant,(4workshop of an Automobile Industry in IRAN with 2 types of welding operations, including GMAW (CO2 welding and Spot resistance welding operations. . Method and Materials: Welders` exposures were assessed via collecting 143 breathing zone air samples based on NIOSH 0500 method. Risk assessment was carried out using Singapore recommended method. .Results: Finding showed that the mean of welders exposure in GMAW and Spot resistance welding operations 5.61 ± 5.78and 2.38± 2.15 mg/m3, respectively(p<0.05. The results showed that in GMAW welders had the highe exposure in comparison with Spot resistance welders (p<0.05. The findings also demonstrated that the risk rate of GMAW welders were high, while this rate for Spot resistance was low. .Conclusion: more hygienic attention is needed for GTAW welders. Control approaches are required including effective engineering control, conduct air monitoring, biological monitoring training, adopt respiratory protection program, develop and implement safe and correct work procedures and finally reassess the risk after all the controls have been done.

  1. La place de l’automobile dans le développement des stations

    Directory of Open Access Journals (Sweden)

    Paul Smith

    2004-03-01

    Full Text Available Dès le début du XXe siècle, les stations de la côte normande deviennent une destination privilégiée pour des automobilistes parisiens. L’article prend l’exemple de Deauville, « capitale balnéaire de l’automobile » relancée à la Belle époque par Eugène Cornuché, pour examiner l’impact du nouveau moyen de transport sur l’urbanisme et sur l’architecture de la station. Il s’attache également à cerner le rôle joué à Deauville par les grands constructeurs de l’entre-deux-guerres, en particulier André Citroën.From the beginning of the twentieth century, the seaside resorts of the Normandy coast became a favourite destination for Parisian owners of motor cars. The article looks at the example of Deauville, described as the “seaside capital of the motor car”, and examines the impact of the new means of locomotion on the resort’s planning and architecture. It also draws attention to the part played by some of France’s major manufacturers — André Citroën in particular — in the development and reputation of Deauville between the two wars.

  2. Study of numerical simulations concerning the performance of antennas used for automobile wireless communications; Jidosha no musen tsushin ni okeru antenna seino hyoka no tame no suchi simulation no ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Sueyoshi, M; Yano, T; Noda, Y; Goto, H [Honda Lock Mfg. Co. Ltd., Tokyo (Japan)

    1997-10-01

    Automobiles and communication technologies will be more closely related with each other in the advanced intelligence society. Anti-theft security systems apply those technologies, where antenna performance is one of the key elements. This is a study of numerical simulations of the performance of those vehicle antennas. 2 refs., 2 figs.

  3. A comparative study of the effect of automobile pollution on pulmonary function tests of people who reside in high traffic density urban areas and relatively traffic free rural areas

    Directory of Open Access Journals (Sweden)

    Amrith Pakkala

    2014-01-01

    Full Text Available Background: Motor vehicle emissions constitute the most significant source of ultra particles in an urban environment. Traffic related air pollution is an occupational health hazard to individuals who live and work in an environment close to traffic. The present study intends to study the effect of air pollution on the pulmonary system in people who reside in areas exposed to automobile exhaust. Material and Methods: This study was conducted by performing pulmonary function tests (PFT on 20 people who are exposed to automobile exhaust by virtue of their residence nearer to traffic junctions and comparing them with 20 others of age and gender matched and similar anthropometric profile people, who reside in a rural setting free from vehicular air pollution. Statistical analysis was done by Student′s t-test (two-tailed, independent for inter group analysis. Results: There was a statistically significant difference between the two groups as far as parameters like FVC, FEV 1 , PEFR, FEV 1 /FVC, FEF 25-75% . It can be seen that there is decline in dynamic pulmonary function parameters in the study group when compared to controls, which is statistically significant. Conclusion: The respiratory system are particulate matter (PM 10 and sulphur dioxide (SO 2 produced by the combustion of fossil fuels. These pollutants react with each other, forming hazardous acid sulfate particles, which are capable of reaching deep inside the tracheo-bronchial tree producing a bronchoconstrictor response, as their predominant site of action are the small airways. This was a comparative study to demonstrate the effect of air pollution due to automobile exhaust on pulmonary functions of people who reside in areas exposed to a polluted urban environment with a similar group in the rural relatively pollution free environment.

  4. Regulation on power efficiency in the automobile; Regulacion sobre eficiencia energetica en el automovil

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado Susano, Armando; Romero de Vivar Uvaldo, Pascual [Comision Nacional para el Ahorro de Energia, Mexico, D.F. (Mexico)

    2001-07-01

    In this article it is presented a brief analysis of one of the regulations on the yield of fuel consumption of the light vehicles that promoted substantial changes in the Mexican automotive industry, the decree denominated PREMCE (Average of minimum fuel yield by company), as well as some international experiences relative to the subject. It is also indicated the evolution, in the last years, of the average yields of fuel consumption (Km/L) in Mexico in the new automobiles and the more important technological factors that affect their energy efficiency. [Spanish] En este articulo se presenta un breve analisis de una de las regulaciones sobre el rendimiento de consumo de combustible de los vehiculos ligeros que promovio cambios sustanciales en la industria automotriz mexicana, el decreto denominado Premce (Promedio de rendimiento minimo de combustible por empresa), asi como algunas experiencias internacionales relativas al tema. Se senala tambien la evolucion, en los ultimos anos, de los rendimientos promedio de consumo de combustible (Km/L) en Mexico en los automoviles nuevos y los factores tecnologicos mas importantes que influyen en su eficiencia energetica.

  5. Investigation of anti-wear performance of automobile lubricants using thin layer activation analysis technique

    Energy Technology Data Exchange (ETDEWEB)

    Biswal, Jayashree [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Thakre, G.D. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Pant, H.J., E-mail: hjpant@barc.gov.in [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Samantray, J.S. [Isotope and Radiation Application Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Arya, P.K. [Tribology and Combustion Division, Indian Institute of Petroleum, Dehradun 248005, Uttarakhand (India); Sharma, S.C.; Gupta, A.K. [Nuclear Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2017-05-15

    An investigation was carried out to examine the anti-wear behavior of automobile lubricants using thin layer activation analysis technique. For this study disc gears made of EN 31 steel were labeled with a small amount of radioactivity by irradiating with 13 MeV proton beam from a particle accelerator. Experiments on wear rate measurement of the gear were carried out by mounting the irradiated disc gear on a twin-disc tribometer under lubricated condition. The activity loss was monitored by using a NaI(Tl) scintillation detector integrated with a multichannel analyzer. The relative remnant activity was correlated with thickness loss by generating a calibration curve. The wear measurements were carried out for four different types of lubricants, named as, L1, L2, L3 and L4. At lower load L1 and L4 were found to exhibit better anti-wear properties than L2 and L3, whereas, L4 exhibited the best anti-wear performance behavior than other three lubricants at all the loads and speeds investigated.

  6. Development and Performance Evaluation of Image-Based Robotic Waxing System for Detailing Automobiles.

    Science.gov (United States)

    Lin, Chi-Ying; Hsu, Bing-Cheng

    2018-05-14

    Waxing is an important aspect of automobile detailing, aimed at protecting the finish of the car and preventing rust. At present, this delicate work is conducted manually due to the need for iterative adjustments to achieve acceptable quality. This paper presents a robotic waxing system in which surface images are used to evaluate the quality of the finish. An RGB-D camera is used to build a point cloud that details the sheet metal components to enable path planning for a robot manipulator. The robot is equipped with a multi-axis force sensor to measure and control the forces involved in the application and buffing of wax. Images of sheet metal components that were waxed by experienced car detailers were analyzed using image processing algorithms. A Gaussian distribution function and its parameterized values were obtained from the images for use as a performance criterion in evaluating the quality of surfaces prepared by the robotic waxing system. Waxing force and dwell time were optimized using a mathematical model based on the image-based criterion used to measure waxing performance. Experimental results demonstrate the feasibility of the proposed robotic waxing system and image-based performance evaluation scheme.

  7. Application of solar flat plate collector in automobile industry

    Energy Technology Data Exchange (ETDEWEB)

    Wawge, P. [Peenya Alloys Pvt. Ltd., Parvati, Pune (India)

    2004-07-01

    In any industry, heating, cooling and compressed air the costliest part, which affects the production cost of any product. There are three types of indirect heat requirement or the requirement of heat can be divided in the three main categories. (1) low temp. 40 - 60 Deg. (2) Medium temp. 80 - 150 deg. (3) High Temp applications - above 150. Solar Flat Collectors have been proven for the use of solar energy for medium temp. application in hotels, boiler feed water preheating, dairy for pasteurization and some other indirect heating applications. There is another neglected area of application of Solar Flat Plate collector is heat treatment for powder coating plants where heat requirement is bet 50 Deg C - 70 Deg C. In any automobile industry the aesthetic or look of the vehicle place a very important role as far as the sale is concern (after the mechanical performance). The aesthetic means the body and colour of the vehicle. To get a long lasting good quality color, the powder coating procedure plays a major role. Before powder coating there is requirement of different chemical treatment for the removal of rust, grease and other cleaning of the specific sheet metal body parts. The time duration and chemical composition is depends on the selection of body material. A proven method of a chemical treatment is seven / eight tank process. The common system of heating chemicals is by way of electrical heaters, by diesel or other fuel fired boilers. This increases the cost of heat treatment process due the high cost of electricity (for industries rate of electricity is 1.5 to 2 times than the domestic rate) or oils. This can be replaced by Solar water heating system which can efficiently generate the temp of liquid upto 85 Deg C. (orig.)

  8. Ferramentas de Digital Analytics e seu Poder de Previsão sobre o Desempenho: Uma Análise do Mercado Automobilístico Brasileiro

    Directory of Open Access Journals (Sweden)

    Roger Kenji Kimura

    2016-06-01

    Full Text Available O objetivo deste artigo foi entender como as ferramentas de Digital Analytics e seu poder de previsão sobre o desempenho atuam na análise do mercado automobilístico brasileiro. Foram selecionadas as 10 empresas automobilísticas presentes no Brasil com as maiores vendas e coletou-se dados destas páginas durante o período de dois meses, por meio de ferramentas de Digital Analytics. Optou-se pela técnica multivariada de regressão linear múltipla, analisando-se a relação das variáveis independentes (atributos coletados com a dependente (vendas. Como resultado, verificou-se que algumas ferramentas possuem um conjunto melhor de parâmetros que explicam as vendas das montadoras. Dos sete softwares de Digital Analytics observados, seis apresentaram significância no poder de explicação. Esta pesquisa teve característica exclusivamente quantitativa, na qual as variáveis independentes que foram significativas para este estudo puderam ser agrupadas em: “Mídias Sociais” e “Não Mídias Sociais”, prevalecendo uma maior concentração de variáveis “Não Mídias Sociais”. 96 Normal 0 21 false false false PT-BR X-NONE X-NONE

  9. Process for the separation and recovery of palladium and platinum from spent automobile catalyst leach liquor using LIX 84I and Alamine 336.

    Science.gov (United States)

    Reddy, B Ramachandra; Raju, B; Lee, Jin Young; Park, Hyung Kyu

    2010-08-15

    Spent catalysts from automobile industry contain environmentally critical and economically valuable metals such as Pt, Pd, Fe, Ni, Mn, and Cr. In this paper, we present a process for the selective separation and complete recovery of palladium (Pd) and platinum (Pt) from hydrochloric acid leach liquors of spent automobile catalyst employing solvent extraction method. Typical composition of leach liquor used for the present study contains (mg/L): Pd-150, Pt-550, Mn-500, Ni-1000, Fe-1500, Cr-100 and 3 M HCl. Selective separation of Pd from the leach liquor is achieved with 0.5 vol.% LIX 84I (2-hydroxy-5-nonylacetophenone oxime in a mixture with a high flash point hydrocarbon diluent) in kerosene at an aqueous to organic (A/O) ratio of 3 in 2 stages, with an enrichment factor of three. Quantitative stripping of Pd from loaded organic is achieved with 0.5 M thiourea and 1 M HCl. Co-extraction of Fe and Pt with 5 vol.% Alamine 336 (tertiary amine of mixed tri-octyl/decyl amine) in kerosene followed by selective scrubbing of Fe with dilute HCl and complete stripping of Pt from loaded organic was proposed with 0.5 M thiourea and 0.1 M HCl. Purity of Pd and Pt strip solutions are 99.7%. Finally, the present process can solve environmental related issues and at the same time recover valuable metals in pure form. Copyright 2010 Elsevier B.V. All rights reserved.

  10. Effect of 1,6-hexamethylene diisocyanate exposure on peak flowmetry in automobile paint shop workers in Iran.

    Science.gov (United States)

    Pourabedian, Siyamak; Barkhordari, Abdullah; Habibi, Ehsanallah; Rismanchiyan, Masoud; Zare, Mohsen

    2010-06-01

    The aim of this study was to investigate the effects of occupational exposure to 1,6-hexamethylene diisocyanate (HDI) on peak flowmetry in automobile body paint shop workers in Iran. We studied a population of 43 car painters exposed to HDI at their workplaces. Peak expiratory flow was tested for one working week, from the start to the end of each shift. Air was sampled and HDI analysed in parallel, according to the OSHA 42 method. Daily and weekly HDI exposure averages were (0.42+/-0.1) mg m(-3) and (0.13+/-0.05) mg m(-3), respectively. On painting days, 72 % of workers showed more than a 10 % variation in peak expiratory flow. Inhalation exposure exceeded the threshold limit value (TLV) ten times over. This strongly suggests that HDI affected the peak flowmetry in the studied workers.

  11. Decision making in inter‐corporate projects : A qualitative and quantitative study of project workers in automobile research and pre‐ development projects in Japan and Germany

    OpenAIRE

    Markkula, Petter

    2009-01-01

    This thesis is dealing with the integration of Japanese and German project workers in automobile inter‐corporate research/pre‐development projects. The focus is on better understanding the respective decision making process. As cultural differences play a big role in the way that people behave an extra focus was put on investigating this. The methods chosen for this study were quantitative research in the form of a questionnaire and qualitative research in the form of an interview series. For...

  12. Spirosoma metallum sp. nov., isolated from an automobile air conditioning system.

    Science.gov (United States)

    Kim, Dong-Uk; Lee, Hyosun; Lee, Suyeon; Park, Sooyeon; Yoon, Jung-Hoon; Park, So Yoon; Ka, Jong-Ok

    2018-01-01

    A Gram-stain-negative and yellow-pigmented bacterial strain, designated TX0653 T , was isolated from an automobile evaporator core collected in Korea. The cells were aerobic and rod-shaped. The strain grew at 10-28 °C (optimum, 25 °C), at pH 6.0-7.5 (optimum, 6.5), and in the presence of 0-1% (w/v) NaCl (optimum, 0%). Phylogenetically, the strain was related to members of the genus Spirosoma (95.1-90.8% 16S rRNA sequence similarity) and distantly related to Spirosoma pulveris JSH5-14 T (95.1%), Spirosoma fluviale MSd3 T (95.0%), Spirosoma endophyticum DSM 26130 T (94.8%), and Spirosoma linguale DSM 74 T (94.6%). The major fatty acids of the strain were summed feature 3 (C 16:1 ω6c and/or C 16:1 ω7c), C 16:1 ω5c, iso-C 15:0 , iso-C 17:0 3-OH, and C 16:0 . MK-7 was identified as the predominant menaquinone. The polar lipids profile indicated the presence of one phosphatidylethanolamine, one unidentified aminolipid, one unidentified aminophospholipid, two unidentified phospholipids, and three unidentified lipids. On the basis of the phenotypic, genotypic, and chemotaxonomic characteristics, strain TX0653 T represents a novel species in the genus Spirosoma, for which the name Spirosoma metallum sp. nov. (= KACC 19278 T  = NBRC 112495 T ) is proposed.

  13. Spirosoma metallicus sp. nov., isolated from an automobile air conditioning system.

    Science.gov (United States)

    Lee, Hyosun; Kim, Dong-Uk; Lee, Suyeon; Park, Sooyeon; Yoon, Jung-Hoon; Park, So Yoon; Ka, Jong-Ok

    2017-09-01

    A Gram-stain-negative and orangish yellow-pigmented bacterial strain, designated PR1014K T , was isolated from an automobile evaporator core collected in Korea. Phylogenetic analysis based on 16S rRNA gene sequences indicated that strain PR1014K T was related with the members of the genus Spirosoma (94.7-90.2%) and closely related with Spirosoma lacussanchae CPCC 100624 T (94.7%), Spirosoma knui 15J8-12 T (94.3%), and Spirosoma soli MIMBbqt12 T (93.3%). The strain grew at 15-40°C (optimum, 25°C), pH 6.5-7.0 (optimum, 6.5) and 0-1% (w/v) NaCl (optimum, 0%). The predominant fatty acids were summed feature 3 (C 16:1 ω7c and/or C 16:1 ω6c), C 16:0 , iso-C 15:0 , C 16:1 ω5c, and iso-C 17:0 3-OH. The major menaquinone was MK-7. The polar lipid profile of the strain indicated that the presence of one phosphatidylethanolamine, one unidentified aminolipid, two unidentified aminophospholipids, and three unidentified lipids. The DNA G+C content of the strain was 47.4 mol%. On the basis of the phenotypic, genotypic and chemotaxonomic characteristics, strain PR1014K T represents a novel species in the genus Spirosoma, for which the name Spirosoma metallicus sp. nov. (=KACC 17940 T =NBRC 110792 T ) is proposed.

  14. How vulnerable are automobile repair workers to HIV/AIDS? A quantitative and qualitative assessment in a slum of Kolkata,India

    Directory of Open Access Journals (Sweden)

    Mukherjee Shuvankar

    2012-11-01

    Full Text Available Background: Automobile repair workers may run high risk of acquiring HIV/AIDS infection owing to their socio cultural background. A cross- sectional study was conducted among them in Chetla, Kolkata to assess knowledge, attitude and practices related to HIV/AIDS and to find out difference in knowledge status based on different socio-demographic variables. Materials and Methods: Both qualitative and quantitative methods were adopted. A total of 114 male workers were interviewed from randomly selected 12 automobile garages using pre-designed, pre-tested schedule. A uniform scoring system for knowledge was adopted. Chi-square test was applied to find out difference in knowledge score based on different socio-demographic variables. Qualitative analysis was performed after conducting in-depth interview with 24 participants. Results: About 84% belonged to 15-35 years age group with mean age 26.3(+ 2.7 years. Overall, 63.2% had poor knowledge score. Higher difference in knowledge score was obtained with higher literacy status and age (p<0.05. About 29 % of the respondents opined that People Living with HIV/AIDS (PLHAs should not continue their work and 47.4% commented that PLHAs should not reveal their HIV status. One of the three participants who had commercial sex in last 12 months did not use condom. Two participants complained about symptom of genital discharge in last 12 months and none underwent any treatment. Qualitative analysis revealed low awareness level and discriminatory attitude towards PLHAs.Conclusions: Poor level of knowledge and unfavourable attitude of the participants were observed from both quantitative and qualitative analyses though they could not be considered high risk group. Appropriate communication for behavioural change both by group approach and by interpersonal communication was required.

  15. How vulnerable are automobile repair workers to HIV/AIDS? A quantitative and qualitative assessment in a slum of Kolkata, India

    Directory of Open Access Journals (Sweden)

    Ghosh Santanu

    2012-01-01

    Full Text Available Background: Automobile repair workers may run high risk of acquiring HIV/AIDS infection owing to their socio cultural background. A cross- sectional study was conducted among them in Chetla, Kolkata to assess knowledge, attitude and practices related to HIV/AIDS and to find out difference in knowledge status based on different socio- demographic variables. Materials and Methods: Both qualitative and quantitative methods were adopted. A total of 114 male workers were interviewed from randomly selected 12 automobile garages using pre-designed, pre-tested schedule. A uniform scoring system for knowledge was adopted. Chi-square test was applied to find out difference in knowledge score based on different socio-demographic variables. Qualitative analysis was performed after conducting in-depth interview with 24 participants. Results: About 84% belonged to 15-35 years age group with mean age 26.3(+ 2.7 years. Overall, 63.2% had poor knowledge score. Higher difference in knowledge score was obtained with higher literacy status and age (p<0.05. About 29 % of the respondents opined that People Living with HIV/AIDS (PLHAs should not continue their work and 47.4% commented that PLHAs should not reveal their HIV status. One of the three participants who had commercial sex in last 12 months did not use condom. Two participants complained about symptom of genital discharge in last 12 months and none underwent any treatment. Qualitative analysis revealed low awareness level and discriminatory attitude towards PLHAs.Conclusions: Poor level of knowledge and unfavourable attitude of the participants were observed from both quantitative and qualitative analyses though they could not be considered high risk group. Appropriate communication for behavioural change both by group approach and by interpersonal communication was required.

  16. Modelling the impact of cyber attacks on the traffic control centre of an urban automobile transport system by means of enhanced cybersecurity

    Directory of Open Access Journals (Sweden)

    Ivanova Yoana

    2017-01-01

    Full Text Available This paper aims to show the major role means of protection play for strengthening the cybersecurity of critical transport infrastructure by using the advanced method of simulation modelling. The simulation model of a Traffic Control Centre (TTC of an urban Automobile Transport System (ATS is created by the author in the Riverbed Modeler Academic Edition 17.5 computer networks simulation system and is exposed to the impact of a Denial-of-Service attack. In addition, logical conclusions have been made on the basis of the experimental results obtained and evaluated by comparative analysis with results from analogous previous studies.

  17. EVOLUTION OF FIAT AUTOMÓVEIS S.AS STRATEGY VIS-A-VIS COMPETITIVE CHANGES IN THE BRAZILIAN AUTOMOBILE INDUSTRY ENVIRONMENT: A CASE STUDY

    OpenAIRE

    SERGIO MOLINA MICAELO

    2003-01-01

    A Fiat Automóveis S.A. se destacou na indústria automobilística nacional ao atingir, em 2001, a liderança do mercado de automóveis e comerciais leves. A análise desta trajetória avaliou a variação do ambiente competitivo e as estratégias seguidas em dois momentos relevantes determinados por questionário estruturado, que foram 1994 e 2001. A caracterização do ambiente da indústria e das estratégias usaram, respectivamente, o modelo das cinco forças e a tipologia...

  18. Escolhas Associadas ao Automóvel por Homens e por Mulheres: confluência ou divergência? Choices associated with automobiles for Men and Women: convergence or divergence? Opciones relacionadas con el Automóvil por Hombres y por Mujeres: ¿convergencia o divergencia?

    Directory of Open Access Journals (Sweden)

    LICHT, René Henrique Götz

    2009-03-01

    Full Text Available RESUMOO aumento do poder de compra das mulheres tem levado empresas a adotarem estratégias de diferenciação de produtos e a produzirem produtos específicos para o público feminino. A indústria automobilística não está imune a este fenômeno, uma vez que as mulheres representam aproximadamente metade das vendas de automóvel no país. Considerando as diferenças de consumo e de comportamento entre mulheres e homens é colocada a seguinte questão: há diferenças entre escolhas associadas ao automóvel por homens e mulheres? Foram apresentados aos participantes itens presentes no dia-a-dia das pessoas, e que são por elas valorizados; e foi solicitado aos participantes que escolhessem e associassem estes itens ao automóvel. A análise dos resultados revelou haver mais semelhanças do que diferenças entre escolhas associadas ao automóvel por homens e escolhas associadas ao automóvel por mulheres. A semelhança entre as escolhas sugere que as representações, os significados e valores atribuídos ao automóvel por homens e por mulheres são similares e, desta forma, a estratégia de diferenciação de produtos não se aplica à indústria automobilística.ABSTRACTThe increase of the women purchase power has led some companies to adopt strategies of products differentiation as well as to produce specific products to the female public. The auto industry is not immune to this phenomenon, once the women represent, approximately, half of the automobile sales in the country. Considering the consumption and the behavior differences between women and men, it has set the following question: are there differences between the choices associated to the automobile by men and the choices associated to the automobile by women? It has been presented to the participants items found in the people’s day-by-day, which are valorized by them, and the participants have been asked to choose and associate these items to the automobile. The results analysis

  19. Contribution to the enhancement of the energy efficiency in electrical / electronic architectures of automobiles; Beitrag zur Steigerung der Energieeffizienz in Kfz-Elektrik-/Elektronik-Architekturen

    Energy Technology Data Exchange (ETDEWEB)

    Goerber, Matthias

    2013-06-01

    Increasing customer demands for enhanced comfort, safety or assistance functions provide automotive manufacturers with high demands in their product development process. At the same time the criterion of environmental friendliness of the automobile gained more and more importance. These requirements mean that the electrical / electronic architecture of a vehicle is becoming important increasingly. Under this aspect, the author of the contribution under consideration reports on the criterion of energy efficiency of electrical / electronic architecture and its influence on fuel consumption and range of vehicles.

  20. Prospects of a mathematical theory of human behavior in complex man-machine systems tasks. [time sharing computer analogy of automobile driving

    Science.gov (United States)

    Johannsen, G.; Rouse, W. B.

    1978-01-01

    A hierarchy of human activities is derived by analyzing automobile driving in general terms. A structural description leads to a block diagram and a time-sharing computer analogy. The range of applicability of existing mathematical models is considered with respect to the hierarchy of human activities in actual complex tasks. Other mathematical tools so far not often applied to man machine systems are also discussed. The mathematical descriptions at least briefly considered here include utility, estimation, control, queueing, and fuzzy set theory as well as artificial intelligence techniques. Some thoughts are given as to how these methods might be integrated and how further work might be pursued.

  1. Gender-specific risk factors for virologic failure in KwaZulu-Natal: automobile ownership and financial insecurity.

    Science.gov (United States)

    Hare, Anna Q; Ordóñez, Claudia E; Johnson, Brent A; Del Rio, Carlos; Kearns, Rachel A; Wu, Baohua; Hampton, Jane; Wu, Peng; Sunpath, Henry; Marconi, Vincent C

    2014-11-01

    We sought to examine which socioeconomic indicators are risk factors for virologic failure among HIV-1 infected patients receiving antiretroviral therapy (ART) in KwaZulu-Natal, South Africa. A case-control study of virologic failure was conducted among patients recruited from the outpatient clinic at McCord Hospital in Durban, South Africa between October 1, 2010 and June 30, 2012. Cases were those failing first-line ART, defined as viral load >1,000 copies/mL. Univariate logistic regression was performed on sociodemographic data for the outcome of virologic failure. Variables found significant (p ownership was a risk factor among males, while variables of financial insecurity (unemployment, non-spouse family paying for care, staying with family) were risk factors for women. In this cohort, financial insecurity among women and automobile ownership among men were risk factors for virologic failure. Risk factor differences between genders demonstrate limitations of generalized risk factor analysis.

  2. Trends in Automobile Travel, Motor Vehicle Fatalities, and Physical Activity: 2003-2015.

    Science.gov (United States)

    McDonald, Noreen C

    2017-05-01

    Annual per-capita automobile travel declined by 600 miles from 2003 to 2014 with decreases greatest among young adults. This article tests whether the decline has been accompanied by public health co-benefits of increased physical activity and decreased motor vehicle fatalities. Minutes of auto travel and physical activity derived from active travel, sports, and exercise were obtained from the American Time Use Survey. Fatalities were measured using the Fatality Analysis Reporting System. Longitudinal change was assessed for adults aged 20-59 years by age group and sex. Significance of changes was assessed by absolute differences and unadjusted and adjusted linear trends. Analyses were conducted in 2016. Daily auto travel decreased by 9.2 minutes from 2003 to 2014 for all ages (ptravel showed only modest declines across age groups and, for men aged 20-29 years, varied from 10.9 (95% CI=10.0, 11.7) in 2003 to 9.7 (95% CI=8.7, 10.8) in 2014. Reduced motor vehicle fatalities are a public health co-benefit of decreased driving, especially for male millennials. Despite suggestions to the contrary, individuals did not switch from cars to active modes nor spend more time in sports and exercise. Maintenance of the safety benefits requires additional attention to road safety efforts, particularly as auto travel increases. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  3. CONSUMER BEHAVIOR – REFERENCE ELEMENT FOR MARKET TRENDS OF AUTOMOBILE IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Nicoleta ISAC

    2016-11-01

    Full Text Available The paper aims to form an overview of the current situation of the car market in Romania and based on this to highlight trends and directions towards which this important branch of manufacturing industry seen through the eyes of consumers. The consumer always seeks to compare the performance of the product, with certain standards and they have required to inform themselves and to reflect upon purchasing the product. In order to ensure business success and minimize the risk, entrepreneurs must pay major attention to defining and knowledge of the market or markets they want to act, as well as the segment of consumers that their it proposes to conquer the products and services offered. To a better analyze of the consumer behaviour we implemented a model based on a questionnaire that allows us to detect the main objectives: Identifying the attributes of an ideal car; Establishing the importance of these attributes for current and potential customers; The Dacia brand in comparison to major competing brands; Determining the factors influencing the choice of consumer. The reason I chose the automobile market is the fact that manufacturing (which includes engineering sector, whose part is the construction industry of cars is the main component industry in Romania, covering about 80% of the volume of activity in which are covered about 1.5 million people.

  4. Investigation of an alleged mechanism of finger injury in an automobile crash.

    Science.gov (United States)

    Stacey, Stephen; Kent, Richard

    2006-07-01

    This investigation centers on the case of an adult male whose finger was allegedly amputated by the steering wheel of his car during a crash. The subject claimed to have been driving with his left index finger inserted through a hole in the spoke of his steering wheel and was subsequently involved in an offset frontal collision with a tree. The finger was found to be cleanly severed at the mid-shaft of the proximal phalanx after the crash. This injury was alleged to have been caused by inertial loading from the rotation of the steering wheel during the crash. To determine whether this injury mechanism was plausible, three laboratory tests representing distinct loading scenarios were carried out with postmortem human surrogates loaded dynamically by the subject's steering wheel. It was found that the inertial loads generated in this loading scenario are insufficient to amputate the finger. Additionally, artificially constraining the finger to force an amputation to occur revealed that a separation at the proximal interphalangeal joint occurs rather than a bony fracture of the proximal phalanx. Based on these biomechanical tests, it can be concluded that the subject's injury did not occur during the automobile crash in question. Furthermore, it can be shown that the injury was self-inflicted to fraudulently claim on an insurance policy.

  5. Achievement report on research and development in the Sunshine Project in fiscal 1978. Research on hydrogen energy subsystems (research on hydrogen fueled automobile systems); 1978 nendo suiso energy subsystem no kenkyu seika hokokusho. Suiso jidosha system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-03-01

    This paper describes the result of discussions on hydrogen fueled automobiles in fiscal 1978. Hydrogen fueled automobiles have a difficulty in developing methods for transporting hydrogen, whereas the liquefied hydrogen method and the metal hydride method are being studied in parallel at the present. It is also necessary to solve such basic problems as the method for supplying hydrogen to engines, the injection method, and countermeasures for abnormal combustion. Safety assurance is also important. Very little information is available presently on methods for storing hydrogen inside a car and supplying thereof, which are required for evaluating utilization of liquefied hydrogen to automobiles. Demonstrative surveys and researches are required to acquire basic materials for hydrogen feeding methods in broader meaning including storage and control. Therefore, fiscal 1977 has begun trial fabrication of experimental liquefied hydrogen tanks, and preliminary and experimental researches on types and materials for feed pumps. Fiscal 1978 has moved forward improvements in prototype tank performance (heat insulation method to reduce evaporation loss), trial fabrication of liquid level meters, trial fabrication of feed pumps (especially selection of materials for the sliding parts), and researches on flow rate control methods. Drawings for modification and experiment of the liquefied hydrogen tanks were prepared, and the promising candidates were selected for material combination in pump sliding parts. Durability tests are continuing thereon. Flow rate control was also discussed. (NEDO)

  6. Effects of long working hours and the night shift on severe sleepiness among workers with 12-hour shift systems for 5 to 7 consecutive days in the automobile factories of Korea.

    Science.gov (United States)

    Son, Mia; Kong, Jeong-Ok; Koh, Sang-Baek; Kim, Jaeyoung; Härmä, Mikko

    2008-12-01

    We investigated the effects of 12-hour shift work for five to seven consecutive days and overtime on the prevalence of severe sleepiness in the automobile industry in Korea. [Correction added after online publication 28 Nov: Opening sentence of the summary has been rephrased for better clarity.] A total of 288 randomly selected male workers from two automobile factories were selected and investigated using questionnaires and sleep-wake diaries in South Korea. The prevalence of severe sleepiness at work [i.e. Karolinska Sleepiness Scale (KSS) score of 7 or higher] was modeled using marginal logistic regression and included theoretical risk factors related to working hours and potential confounding factors related to socio-economic status, work demands, and health behaviors. Factors related to working hours increased the risk for severe sleepiness at the end of the shift in the following order: the night shift [odds ratio (OR): 4.7; 95% confidence interval (CI): 3.6-6.0)], daily overtime (OR: 2.2; 95% CI: 1.7-2.9), weekly overtime (OR: 1.6; 95% CI: 1.0-2.6), and night overtime (OR: 1.6; 95% CI: 0.8-3.0). Long working hours and shift work had a significant interactive effect for severe sleepiness at work. Night shift workers who worked for 12 h or more a day were exposed to a risk of severe sleepiness that was 7.5 times greater than day shift workers who worked less than 11 h. Night shifts and long working hours were the main risk factors for severe sleepiness among automobile factory workers in Korea. Night shifts and long working hours have a high degree of interactive effects resulting in severe sleepiness at work, which highlight the need for immediate measures to address these characteristics among South Korean labor force patterns.

  7. Réduction de la pollution atmosphérique due à l'automobile et économie d'énergie Reducing Air Pollution Caused by Automobiles and Energy Conservations

    Directory of Open Access Journals (Sweden)

    Salé B.

    2006-11-01

    Full Text Available L'action engagée dans les pays industriels pour réduire la pollution atmosphérique doit maintenant tenir compte, plus encore que par le passé, de la nécessité, imposée par la conjoncture, d'économiser l'énergie. L'article est consacré à l'étude de la compatibilité de ces deux objectifs en ce qui concerne l'automobile. L'ensemble des actions antigaspillage ou antipollution ne portant pas sur le générateur d'énergie constitue un domaine de compatibilité évident. En revanche la réduction des émissions de polluants nécessite des modifications plus ou moins profondes du moteur dont certaines peuvent poser des problèmes du point de vue de l'économie d'énergie. Dans le but de préciser la nature de ces problèmes, les techniques antipollution correspondant à différents niveaux de limitation des émissions sont examinées du point de vue de leur coût, de leur incidence sur la consommation de carburant et de leur interaction avec les procédés visant à l'économie d'énergie. Sont ainsi passés en revue les moyens de réduction des émissions basés sur une amélioration de la combustion, les procédés de post-combustion, le problème de la réduction de la teneur en plomb des essences. Cette analyse montre que dans une large mesure la réduction des émissions de polluants et la diminution de la consommation sont des objectifs compatibles, mais que la difficulté des problèmes à résoudre pour que les mesures antipollution n'aient pas d'effet négatif au plan de l'économie d'énergie croît très rapidement avec la sévérité de ces mesures au-delà d'un certain niveau. L'effort de recherche entrepris dans le monde sur ce thème devrait progressivement permettre à la fois de réduire encore de façon substantielle les émissions de polluants et d'améliorer le rendement des moteurs. Efforts made by industrialized countries ta reduce air pollution must now, more than ever, give consideration to the need for energy

  8. A new Legionella species, Legionella feeleii species nova, causes Pontiac fever in an automobile plant.

    Science.gov (United States)

    Herwaldt, L A; Gorman, G W; McGrath, T; Toma, S; Brake, B; Hightower, A W; Jones, J; Reingold, A L; Boxer, P A; Tang, P W

    1984-03-01

    From 15 to 21 August 1981, Pontiac fever affected 317 automobile assembly plant workers. Results of serologic tests were negative for Mycoplasma, Chlamydia, respiratory tract viruses, and previously described legionellae. A gram-negative, rod-shaped organism (WO-44C) that did not grow on blood agar, required L-cysteine for growth, and contained large amounts of branched-chain fatty acids was isolated from a water-based coolant. The organism did not react with antisera against other legionellae, and on DNA hybridization the organism was less than 10% related to other Legionella species. Geometric mean titers found by indirect fluorescent antibody testing to WO-44C were significantly higher in ill employees than in controls (p = 0.0001). Attack rates by department decreased linearly with the department's distance from the implicated coolant system. The etiologic agent apparently was a new Legionella species; we propose the name Legionella feeleii species nova (AATC 35072). This is the first outbreak of nonpneumonic legionellosis in which the etiologic agent is not L. pneumophila, serogroup 1.

  9. Contribution of components of Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement-A Pilot Empirical Study of the Indian Automobile Manufacturing Sector

    OpenAIRE

    Mohd. Asif Gandhi

    2017-01-01

    This paper is one of the several extensions of the research works done by [5]. Green Supply Chain Practices have been known to have an impact on Green Supply Chain Performance [5].This paper tests empirically through a pilot study of the Indian Automobile Manufacturing Sector, the contribution of the three variables constituting the construct Green Supply Chain Execution-Supply Loops in Green Supply Chain Performance measurement. Also the paper establishes the reliability of the questionnaire...

  10. Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines

    Science.gov (United States)

    Jegadeeshwaran, R.; Sugumaran, V.

    2015-02-01

    Hydraulic brakes in automobiles are important components for the safety of passengers; therefore, the brakes are a good subject for condition monitoring. The condition of the brake components can be monitored by using the vibration characteristics. On-line condition monitoring by using machine learning approach is proposed in this paper as a possible solution to such problems. The vibration signals for both good as well as faulty conditions of brakes were acquired from a hydraulic brake test setup with the help of a piezoelectric transducer and a data acquisition system. Descriptive statistical features were extracted from the acquired vibration signals and the feature selection was carried out using the C4.5 decision tree algorithm. There is no specific method to find the right number of features required for classification for a given problem. Hence an extensive study is needed to find the optimum number of features. The effect of the number of features was also studied, by using the decision tree as well as Support Vector Machines (SVM). The selected features were classified using the C-SVM and Nu-SVM with different kernel functions. The results are discussed and the conclusion of the study is presented.

  11. THE EFFECT OF SOLAR RADIATION ON AUTOMOBILE ENVIRONMENT THROUGH NATURAL CONVECTION AND MIXED CONVECTION

    Directory of Open Access Journals (Sweden)

    MD. FAISAL KADER

    2012-10-01

    Full Text Available In the present paper, the effect of solar radiation on automobiles has been studied by both experimentally and numerically. The numerical solution is done by an operation friendly and fast CFD code – SC/Tetra with a full scale model of a SM3 car and turbulence is modeled by the standard k-ε equation. Numerical analysis of the three-dimensional model predicts a detailed description of fluid flow and temperature distribution in the passenger compartment during both the natural convection due to the incoming solar radiation and mixed convection due to the flow from defrost nozzle and radiation. It can be seen that solar radiation is an important parameter to raise the compartment temperature above the ambient temperature during summer. During natural convection, the rate of heat transfer is fast at the initial period. In the mixed convection analyses, it is found that the temperature drops down to a comfortable range almost linearly at the initial stage. Experimental investigations are performed to determine the temperature contour on the windshield and the local temperature at a particular point for further validation of the numerical results.

  12. Exposure Assessment Suggests Exposure to Lung Cancer Carcinogens in a Painter Working in an Automobile Bumper Shop

    Directory of Open Access Journals (Sweden)

    Boowook Kim

    2013-12-01

    Full Text Available A 46-year-old man who had worked as a bumper spray painter in an automobile body shop for 15 years developed lung cancer. The patient was a nonsmoker with no family history of lung cancer. To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during spray painting, sanding, and heat treatment. The results showed that spray painting with yellow paint increased the concentration of hexavalent chromium in the air to as much as 118.33 μg/m3. Analysis of the paint bulk materials showed that hexavalent chromium was mostly found in the form of lead chromate. Interestingly, strontium chromate was also detected, and the concentration of strontium chromate increased in line with the brightness of the yellow color. Some paints contained about 1% crystalline silica in the form of quartz.

  13. An Exploratory Study on Implementation of Lean Manufacturing Practices(With Special Reference to Automobile Sector Industry(Yalın İmalat Faaliyetine Yönelik Bir Uygulama (Otomobil Endüstrisi Örneği

    Directory of Open Access Journals (Sweden)

    Er. Rajesh Kumar MEHTA

    2012-01-01

    Full Text Available At present scenario, Lean Manufacturing has become a world wide phenomenon. It is quite successful in drawing the attention of companies of all sizes. A large number of organizations are following Lean technologies and experiencing vast improvements in quality, production, customer service, and profitability. Lean Manufacturing is a systematic approach to identifying and eliminating waste through continuous improvement. The manufacturing industry in India must also look to leverage its advantages, its large domestic market, good conditions in terms of raw materials and skilled labour, and the quality focus. In India at the state level, there are few companies that are implementing Lean manufacturing techniques. In Dewas city, the industrial town of Madhya Pradesh, some of the automobile companies are vigorously following the Lean manufacturing techniques to eliminate waste and downsize the cost. Hence, all these factors prompted the researchers to analyze and study the implication of Lean Manufacturing Practices in Automobile Industries.

  14. Effects of Automobile Emissions on Air Pollution in the United States

    Science.gov (United States)

    Cohen, Ryan; Singh, Ramesh

    2016-07-01

    Currently, about more than 253,000,000 automobiles and trucks, some are new, old, gas and electric, ply on the roads in the United States of America. Around the world, human activities and energy demand are the main sources for the air pollution and ozone depletion, causing dense haze, fog and smog especially during winter season in the country like China and India and also observed in different parts of the world. In recent years, automakers have been pushed by new governmental regulations and global expectations to create more fuel-efficient vehicles that burn less fossil fuels and create fewer harmful emissions. Automakers are exploring alternative fuel options such as hydrogen, natural gas, hybrids, and completely electric vehicles. Since the Nissan Leaf's introduction in 2010, fully electric vehicles have become widely produced and just fewer than 400,000 fully electric cars have been sold in the United States. Taking the influx of more fuel-efficient and alternative energy vehicles in the market into account, we have analyzed satellite and ground observed atmospheric pollution and greenhouse gases during 2009-2014 in the United States of America. Our results show that the increasing population of hybrid and fuel efficient vehicles have cut down the atmospheric pollution and greenhouse emissions in US in general, whereas in California the pollution level has increased as a result frequency of fog and haze events are seen during winter season. We will present a comparison of atmospheric pollution over US and California State in view of the increasing hybrid and fuel efficient vehicles.

  15. Inovação tecnológica na indústria automobilística: características e evolução recente Technological innovation in the automotive industry: features and recent evolution

    Directory of Open Access Journals (Sweden)

    Enéas Gonçalves de Carvalho

    2008-12-01

    Full Text Available O objetivo principal deste artigo é analisar as características básicas da evolução recente do processo de inovação tecnológica na indústria automobilística. A hipótese de trabalho é que estariam ocorrendo mudanças na intensidade do processo de inovação técnica nessa indústria. O ponto de partida é a observação de que, nos últimos anos, tem havido na indústria automotiva - provavelmente em decorrência da intensificação da concorrência setorial e de uma maior oportunidade tecnológica - tanto uma ampliação dos gastos em P&D quanto uma crescente incorporação da microeletrônica (nos produtos e nos processos produtivos. Finalmente, são feitas também algumas considerações procurando relacionar os resultados obtidos neste artigo com a discussão do processo de de-maturity (rejuvenescimento industrial, proposto por Abernathy e outros autores.The main goal of this article is to analyze the recent evolution of the technological innovation process in the automobile industry. A provisional assumption is that could be happened changes on the auto industry technical innovation process. The starting point is the observation that, in the last years, there have been both - probably as consequence of the sectorial competition intensification and the higher technological opportunity - an amplification of the expenses in R&D as well as an increasing incorporation of the microelectronics, in the products and in the productive processes, by the automobile industry. Finally, some considerations are made, aiming at relating the obtained results in this article with the discussion of the de-maturity industrial process proposed by Abernathy and other authors.

  16. Pressure pain thresholds and musculoskeletal morbidity in automobile manufacturing workers.

    Science.gov (United States)

    Gold, Judith E; Punnett, Laura; Katz, Jeffrey N

    2006-02-01

    Reduced pressure pain thresholds (PPTs) have been reported in occupational groups with symptoms of upper extremity musculoskeletal disorders (UEMSDs). The purpose of this study was to determine whether automobile manufacturing workers (n=460) with signs and symptoms of UEMSDs had reduced PPTs (greater sensitivity to pain through pressure applied to the skin) when compared with unaffected members of the cohort, which served as the reference group. The association of PPTs with symptom severity and localization of PE findings was investigated, as was the hypothesis that reduced thresholds would be found on the affected side in those with unilateral physical examination (PE) findings. PPTs were measured during the workday at 12 upper extremity sites. A PE for signs of UEMSDs and symptom questionnaire was administered. After comparison of potential covariates using t tests, linear regression multivariable models were constructed with the average of 12 sites (avgPPT) as the outcome. Subjects with PE findings and/or symptoms had a statistically significant lower avgPPT than non-cases. AvgPPT was reduced in those with more widespread PE findings and in those with greater symptom severity (test for trend, P

  17. Finite element simulation of surface defects in the automobile door outer panel

    International Nuclear Information System (INIS)

    Fukumura, Masaru; Yamasaki, Yuji; Inage, Daisuke; Fujita, Takashi

    2004-01-01

    Recently, a sheet metal forming simulation has become an indispensable tool for developing a new model of an automobile part within a limited short period. In these days, the utilization of a springback calculation of the formed part has been increasing. However, only a few papers on the prediction of surface defects have been reported in spite of serious needs.In this paper, surface defects in the door outer panel, especially those around the door handle embossment, have been investigated. Applying an explicit solver to the forming simulation, and an implicit solver to the springback calculation, we have tried to evaluate surface defects in the panel. In order to improve the accuracy of the simulation, numerical tools have been modeled including the precise shape of the draw beads so that the draw bead effects on both the material flow and the restraint on the springback deformation have been considered. Compared with the actual panel shape, which shows apparent surface defects, the simulated result has closely predicted the above defects around the embossment.To demonstrate the applicability of our simulation, a few sensitivity analyses have been carried out, modifying forming conditions such as blank holder force. Each result has shown slight but distinctive differences in the cross section profile of the panel. As a result, it has been realized that the influence of each considered factor on surface defects is qualitatively consistent with our practical knowledge

  18. Effect of fiber content on tensile retention properties of Cellulose Microfiber Reinforced Polymer Composites for Automobile Application

    Science.gov (United States)

    Aseer, J. R.; Sankaranarayanasamy, K.

    2017-12-01

    Today, the utilization of biodegradable materials has been hogging much attention throughout the world. Due to the disposal issues of petroleum based products, there is a focus towards developing biocomposites with superior mechanical properties and degradation rate. In this research work, Hibiscus Sabdariffa (HS) fibers were used as the reinforcement for making biocomposites. The HS fibers were reinforced in the polyester resin by compression moulding method. Water absorption studies of the composite at room temperature are carried out as per ASTM D 570. Also, degradation behavior of HS/Polyester was done by soil burial method. The HS/polyester biocomposites containing 7.5 wt% of HS fiber has shown higher value of tensile strength. The tensile strength retention of the HS/Polyester composites are higher than the neat polyester composites. This value increases with increase of HS fiber loading in the composites. The results indicated that HS/polyester biocomposites can be used for making automobile components such as bumper guards etc.

  19. Suitability of Recycled Polyethylene/Palm Kernel Shell-Iron Filings Composite for Automobile Application

    Directory of Open Access Journals (Sweden)

    I.A. Samotu

    2015-06-01

    Full Text Available A recycling aimed research was carried out to produce a new composite material and proffer suggestion for the possible use of the newly developed composite material. The empty water sachet (commonly called pure water nylon in Nigeria, was used as a matrix, which was reinforced by carbonized palm kernel shell (CPKS particulate and iron fillings. The percentage composition of iron fillings was maintained at 5 wt%, while that of palm kernel shell ash was varied from 5 wt% - 20 wt% at an interval of 5 %. The composites were compounded and compressively moulded. Physical and mechanical properties of the composites were tested for alongside three conventional car bumper samples, and the results obtained shows that the composite material could be used to produce a car bumper among other parts of automobile like dashboard due to their impact strength and low density. Impact strength - density ratio for the materials gave prime information on the possible application of the developed material. Scanning Electron Microscope (SEM was used to examine the distribution of the reinforcement within the matrix. After results analysis, materials with 5 wt% of CPKS and that with 10 wt% of CPKS were recommended for the car bumper production following their high impact strength - density ratio of 0.26 and 0.19 respectively, which are higher as compared to that of a conventional bumper material measured alongside the composite materials.

  20. Electron spin resonance of particulate soot samples from automobiles to help environmental studies

    International Nuclear Information System (INIS)

    Yamanaka, C.; Matsuda, T.; Ikeya, M.

    2005-01-01

    The application of electron spin resonance (ESR) was studied for diesel soot samples and suspended particulate matter (SPM) from automobile engines. Soot samples or diesel exhaust particles (DEP) were recovered at various points: in the exhaust pipe of a diesel engine, at the dust sampler of a highway tunnel (standard DEP), on the soundproofing wall alongside a heavy traffic road, and on the filters of a dust sampler for SPM. The diesel soot samples apparently showed two ESR spectra: one was a broad spectrum at g=2.1 with a line width of ca. 80-120mT and the other was a sharp signal of a carbon radical at g=2.003 with a line width of 0.4mT. Annealing experiments with a DEP sample at 250 deg. C revealed drastic enhancement of the sharp ESR signal, which suggested a thermal process of carbonization of remnant organics. An oximetric study by ESR showed an enhancement of the broad signal in the diesel soot sample as well as in the sharp ESR signal. Therefore, the main part of the broad ESR signal would be attributed to carbon radicals, which form a different configuration, probably closely interacting aggregates. Enhancement of the sharp ESR signal was not observed in the standard DEP sample under vacuum condition, which suggested less adsorption sites on the surface of DEP samples

  1. Auto-mobilized adult hematopoietic stem cells advance neovasculature in diabetic retinopathy of mice

    Institute of Scientific and Technical Information of China (English)

    TIAN Bei; LI Xiao-xin; SHEN Li; ZHAO Min; YU Wen-zhen

    2010-01-01

    Background Hematopoietic stem cells (HSCs) can be used to deliver functionally active angiostatic molecules to the retinal vasculature by targeting active astrocytes and may be useful in targeting pre-angiogenic retinal lesions. We sought to determine whether HSC mobilization can ameliorate early diabetic retinopathy in mice.Methods Mice were devided into four groups: normal mice control group, normal mice HSC-mobilized group, diabetic mice control group and diabetic mice HSC mobilized group. Murine stem cell growth factor (murine SCF) and recombined human granulocyte colony stimulating factor (rhG-csf) were administered to the mice with diabetes and without diabetes for continuous 5 days to induce autologous HSCs mobilization, and subcutaneous injection of physiological saline was used as control. Immunohistochemical double staining was conducted with anti-mouse rat CD31 monoclonal antibody and anti-BrdU rat antibody.Results Marked HSCs clearly increased after SCF plus G-csf-mobilization. Non-mobilized diabetic mice showed more HSCs than normal mice (P=0.032), and peripheral blood significantly increased in both diabetic and normal mice (P=0.000).Diabetic mice showed more CD31 positive capillary vessels (P=0.000) and accelerated endothelial cell regeneration. Only diabetic HSC-mobilized mice expressed both BrdU and CD31 antigens in the endothelial cells of new capillaries.Conclusion Auto-mobilized adult hematopoietic stem cells advance neovasculature in diabetic retinopathy of mice.

  2. Modelling and Analysis of Automobile Vibration System Based on Fuzzy Theory under Different Road Excitation Information

    Directory of Open Access Journals (Sweden)

    Xue-wen Chen

    2018-01-01

    Full Text Available A fuzzy increment controller is designed aimed at the vibration system of automobile active suspension with seven degrees of freedom (DOF. For decreasing vibration, an active control force is acquired by created Proportion-Integration-Differentiation (PID controller. The controller’s parameters are adjusted by a fuzzy increment controller with self-modifying parameters functions, which adopts the deviation and its rate of change of the body’s vertical vibration velocity and the desired value in the position of the front and rear suspension as the input variables based on 49 fuzzy control rules. Adopting Simulink, the fuzzy increment controller is validated under different road excitation, such as the white noise input with four-wheel correlation in time-domain, the sinusoidal input, and the pulse input of C-grade road surface. The simulation results show that the proposed controller can reduce obviously the vehicle vibration compared to other independent control types in performance indexes, such as, the root mean square value of the body’s vertical vibration acceleration, pitching, and rolling angular acceleration.

  3. Application of the Open Cycle Stirling Engine Driven with Liquid Nitrogen for the Non-Polluting Automobiles

    Directory of Open Access Journals (Sweden)

    M.B. Kravchenko

    2017-10-01

    Full Text Available Progress on advancing technology of using liquid nitrogen for the non-polluting automobiles is reported. It is shown that the low exergy efficiency of the known engines fueled with liquid nitrogen has discredited the very idea of a cryomobile. The design of the open-cycle cryogenic Stirling engine is proposed. This engine allows extracting up to 57% of the exergy accumulated in liquid nitrogen. The method used to calculate of such open-cycle Stirling engine is described and the calculation results and discussion are presented. It is shown that 200 liters of liquid nitrogen is sufficient for 180 km range of cryomobile at speed of 55 km/h, while a full charge of the 300-kilogram battery of Nissan LEAF electric vehicle is sufficient for a range of 160 km. Use of liquid nitrogen or liquid air as an energy vector in a transport will not require scarce materials, and, in comparison with using of lithium-ion batteries or hydrogen, this will require less capital investment.

  4. Upgrading of automobile shredder residue via innovative granulation process 'ReGran'.

    Science.gov (United States)

    Holthaus, Philip; Kappes, Moritz; Krumm, Wolfgang

    2017-01-01

    Stricter regulatory requirements concerning end-of-life vehicles and rising disposal costs necessitate new ways for automobile shredder residue utilisation. The shredder granulate and fibres, produced by the VW-SICON-Process, have a high energy content of more than 20 MJ kg -1 , which makes energy recovery an interesting possibility. Shredder fibres have a low bulk density of 60 kg m -3 , which prevents efficient storing and utilisation as a refuse-derived fuel. By mixing fibres with plastic-rich shredder granulate and heating the mixture, defined granules can be produced. With this 'ReGran' process, the bulk density can be enhanced by a factor of seven by embedding shredder fibres in the partially melted plastic mass. A minimum of 26-33 wt% granulate is necessary to create enough melted plastic. The process temperature should be between 240 °C and 250 °C to assure fast melting while preventing extensive outgassing. A rotational frequency of the mixing tool of 1000 r min -1 during heating and mixing ensures a homogenous composition of the granules. During cooling, lower rotational frequencies generate bigger granules with particles sizes of up to 60 mm at 300 r min -1 . To keep outgassing to a minimum, it is suggested to melt shredder granulate first and then add shredder fibres. Adding coal, wood or tyre fluff as a third component reduces chlorine levels to less than 1 wt%. The best results can be achieved with tyre fluff. In combination with the VW-SICON-Process, ReGran produces a solid recovered fuel or 'design fuel' tailored to the requirements of specific thermal processes.

  5. Radionuclide technology applications in development and production in the automobile industry

    International Nuclear Information System (INIS)

    Sailer, S.

    1982-01-01

    Radionuclide technology (RNT) is utilized for air-engineering measurements. The spheres of interest here are the magnitude of the air flow and its spatial distribution in the interior of passenger cars, truck cabs and buses. For this purpose the air inside the vehicle is marked with 85 Kr, and the decrease in activity is measured at various driving speeds simulated in a wind tunnel. Oil consumption measurements with tritium-marked motor oil are used primarily to optimize new engines in terms of design (e.g. piston-ring components, type of lubrication), materials and lubricants. For this purpose the oil consumption is measured under various engine operating conditions (oil-consumption performance graph). The oil consumption of the individual cylinders can also be measured. The effect of production technologies (e.g. form and surface perfection) on oil consumption is important for improving production. The radionuclide technique most often used in the automobile industry is for the measurement of wear. The focal point here is the optimization of tribological systems in the development of engines, transmissions etc., studying the influence of design, materials and lubricants and determining the operating conditions which are critical for wear. Important information regarding the influence of production technologies on wear can be gained for production. In addition, considerable savings and higher quality can be realized in production by optimization of engine run-in programmes with RNT. The common factors for all RNT processes mentioned are that, compared with conventional measuring procedures, they are more precise, require shorter testing times, and can be performed under normal operating conditions. The prerequisites are careful selection of the applications and continual optimization of measurement technology. (author)

  6. Experimental Investigation of Heat Transfer Characteristics of Automobile Radiator using TiO2-Nanofluid Coolant

    Science.gov (United States)

    Salamon, V.; Senthil kumar, D.; Thirumalini, S.

    2017-08-01

    The use of nanoparticle dispersed coolants in automobile radiators improves the heat transfer rate and facilitates overall reduction in size of the radiators. In this study, the heat transfer characteristics of water/propylene glycol based TiO2 nanofluid was analyzed experimentally and compared with pure water and water/propylene glycol mixture. Two different concentrations of nanofluids were prepared by adding 0.1 vol. % and 0.3 vol. % of TiO2 nanoparticles into water/propylene glycol mixture (70:30). The experiments were conducted by varying the coolant flow rate between 3 to 6 lit/min for various coolant temperatures (50°C, 60°C, 70°C, and 80°C) to understand the effect of coolant flow rate on heat transfer. The results showed that the Nusselt number of the nanofluid coolant increases with increase in flow rate. At low inlet coolant temperature the water/propylene glycol mixture showed higher heat transfer rate when compared with nanofluid coolant. However at higher operating temperature and higher coolant flow rate, 0.3 vol. % of TiO2 nanofluid enhances the heat transfer rate by 8.5% when compared to base fluids.

  7. Development of a basic numerical model of an isooctane catalytic autothermal reformer for an automobile

    International Nuclear Information System (INIS)

    Li, V.C.L.; Harrison, S.; Oosthuizen, P.; Peppley, B.

    2004-01-01

    'Full text:' A numerical study of the performance of an isooctane catalytic autothermal reformer for a fuel cell automobile has been undertaken. The prototype reformer considered in this study, which is a tubular reformer with three annular sections, was designed and built at the Royal Military College of Canada (RMC). The flow within the reformer was assumed to be steady. The different chemical reactions, along with the reaction rate constants, that take place over the autothermal reforming catalyst (a ceria-based platinum catalyst), were obtained through the analysis and regression of the experimental results from the literature. By neglecting the radial gradients in the concentrations and the velocities of the various species in the flow and in the temperature of the reformer, a one-dimensional numerical model, based on the molar flow rate differential equations and energy equation, was developed to simulate the composition and temperature profiles along the length of the catalyst bed. The results obtained from the numerical model were verified against published results. Numerical results were obtained for a range of total inlet flow rates, different inlet temperatures of the fuel mixture and different oxygen concentrations in feed air at the inlet of the reformer. (author)

  8. 论信息时代的汽车广告创意%In the information era of automobile advertising creative

    Institute of Scientific and Technical Information of China (English)

    刘静

    2013-01-01

    The car advertisement in today’s information age,as the representative of industrialization, is not only the advertising function,is more of a creative advertising art.At present,the automotive industry,colorful is marketing strategy,which not only promoted the rapid development of the advertising industry,but also for the enterprise marketing plays a promoting role.The face of increasingly fierce market competition,automobile advertising as advertising industry leader,in addition to update and enrich the content industry,but also for the information age under the advertisement creativity constantly bring forth the new through the old,so we pay attention to a lot of excellent creativity and exquisite form of automobile advertising research subject is very good.%  汽车广告在现今的信息时代,作为工业化的代表体现,不仅仅是单纯的广而告之的功能,更是一门具有创意的广告艺术。目前的汽车行业,可谓营销策略色彩斑斓,这既促进了广告行业的蓬勃发展,又对于该行业企业之间的行销宣传起到了促进作用。面对越来越激烈的市场竞争,汽车广告作为广告业的领头羊,除了要更新和丰富行业的内容之外,也要为信息时代下的广告创意不断地推陈出新,因此我们关注到了很多拥有卓越创意和精美表现形式的汽车广告是很好的研究课题。

  9. Dioxin emission factors for automobiles from tunnel air sampling in Northern Taiwan.

    Science.gov (United States)

    Chang, Moo Been; Chang, Shu Hao; Chen, Yuan Wu; Hsu, Hsuan Chien

    2004-06-05

    This study measured PCDD/F concentrations in tunnel air and vehicle exhaust. The ambient air samples were collected with air samplers (Tisch PS-1) complying with USEPA TO-9A. The results indicate that the tunnel air had a PCDD/F TEQ concentration about two times as high as that of outside air (47.3 and 57.1 fg-I-TEQ/m3 for tunnel air vs. 37.1 fg-I-TEQ/m3 and 23.3 fg-I-TEQ/m3 for outside air, respectively). This provides the direct evidence that PCDD/F compounds are emitted from the combustion processes in gasoline- and diesel-fueled engines. According to the tunnel study, the emission factors ranged from 5.83 to 59.2 pg I-TEQ/km for gasoline vehicles and 23.32 to 236.65 pg I-TEQ/km of diesel vehicles. This indicates that the dioxin emission factor in Taiwan is lower than that measured in USA, Norway and Germany. When the speed of the diesel vehicle was set at 40 km/h, the dioxin concentration emitted from diesel vehicle was 278 pg/m3 (6.27 pg-I-TEQ/m3) from tailpipe testing. However, when the diesel vehicle was idled, the dioxin concentration increased greatly to 4078 pg/m3 (41.9 pg-I-TEQ/m3). From the results of tunnel air sampling, the PCDD/Fs emission from automobiles in Taiwan was estimated as 3.69 g I-TEQ per year. Copryright 2003 Elsevier B.V.

  10. Can Next-Generation Vehicles Sustainably Survive in the Automobile Market? Evidence from Ex-Ante Market Simulation and Segmentation

    Directory of Open Access Journals (Sweden)

    Jungwoo Shin

    2018-02-01

    Full Text Available Introduced autonomous and connected vehicles equipped with emerging technologies are expected to change the automotive market. In this study, using stated preference (SP data collected from choice experiments conducted in Korea with a mixed multiple discrete-continuous extreme value model (MDCEV, we analyzed how the advent of next-generation of vehicles with advanced vehicle technologies would affect consumer vehicle choices and usage patterns. Additionally, ex-ante market simulations and market segmentation analyses were conducted to provide specific management strategies for next-generation vehicles. The results showed that consumer preference structures of conventional and alternative fuel types primarily differed depending on whether they were drivers or non-drivers. Additionally, although the introduction of electric vehicles to the automobile market is expected to negatively affect the choice probability and mileage of other vehicles, it could have a positive influence on the probability of purchasing an existing conventional vehicle if advanced vehicle technologies are available.

  11. FY 1999 report on the results of the investigational study on the promotion of application of aluminum materials to automobiles by the development of low-cost aluminum materials and aluminum resource recycling technology; 1999 nendo tei cost aluminium zai oyobi arumi shigen junkan gijutsu no kaihatsu ni yoru jidosha eno aluminium zai tekiyo suishin ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Presently, the aluminum demand in Japan is approximately 3.8 million tons, and the aluminum discharged as scrap reaches approximately 1.7 million tons/year. Out of the discharged scrap, 54% is recovered as the secondary metal, and the rest, 0.77 million tons, is not recovered and dumped for land reclamation. In future, if the present cascade type recycling goes on, it is predicted that a gap between supply and demand of about 0.5 million tons will arise. To cope with this problem, the following are the measures to be taken : 1) development of the technology to promote the use of recycled aluminum metal for automobiles in which a lot of aluminum is most likely to be used because of the increasing fuel consumption, etc. 2) establishment of a recycling system by which the waste sash discharged in quantity from the construction field is again used as sash. From the two points of view, which are needed in the case of using a lot of aluminum for automobiles, the heightening of competitiveness in the aluminum industry and the recycling in which the aluminum expanded materials used for automobiles are efficiently recycled as expanded materials in the recycling economic system, this survey extracted problems and made proposals, overlooking the state of the aluminum use in automobiles, state of the treatment of used cars, state of manufacturing/processing technology of aluminum products. (NEDO)

  12. Government Policy and Environmental Innovation in the Automobile Sector in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Aahman, Max

    2004-01-01

    The aim of this paper is to analyse the role that the Japanese Government has played, and still plays, in the development of alternatives to conventional vehicles and the effect of government policy. The focus in this paper is on battery-powered electric vehicles (BPEVs), hybrid electric vehicles (HEVs), and fuel cell electric vehicles (FCEVs) These alternatives present an interesting case of technical choices in government policy. The effects of government policy and the process of innovation are analysed from a comprehensive view drawing on the literature regarding technical change and innovation. The whole chain of government support, including the context in which these different policies have been implemented since the early 1970s, is studied. Based on this analysis, current and suggested future government policy is discussed, as the development of alternative vehicles is still an ongoing process. The Japanese Government has adopted a comprehensive strategy and drafted long-term strategic plans including R and D, demonstration and market support. This strategy has enabled the Japanese Government to influence the direction of technical development within the domestic automobile industry with relatively limited government funding. In the development process analysed here, market support have been equally important for the development process as the R and D efforts. The history of BPEVs in Japan illustrates the conventional wisdom that 'picking winners' in government policy is not easy. Our conclusion is that governments should, if possible, focus on technologies that fulfil several policy aims and which can be used in several different applications. This increases the chance of a technology surviving the long journey from idea to competitive product. This study also shows that established dominating companies do not necessarily resist radical changes in their core designs.

  13. Role of Automobile Exhaust on the Photoreductive Solubilization of Atmospheric Iron

    Science.gov (United States)

    Haynes, J.; Majestic, B. J.; Cutler, E.

    2016-12-01

    Atmospheric iron (Fe) plays an essential role in the carbon cycle, affecting the Earth's energy balance and human health. Fe catalyzes oxidations of organic carbon species and serves as a limiting nutrient for phytoplankton in about half of the world's oceans. Wind-blown dust is the major source of atmospheric insoluble Fe while urban areas are correlated with relatively high percentages of soluble Fe. The occurrence of elevated levels of soluble Fe near urban and industrial regions suggests a correlation between Fe solubilization and organic combustion products, including polycyclic aromatic hydrocarbons (PAH). Fossil fuel consumption for internal combustion engines produce atmospheric PAH as a major component of automobile exhaust. Under light, PAH transform into oxidized components such as ketones and carboxylic acids. For example, phthalic acid (formed from naphthalene) inhibits Fe oxidation reactions and therefore may contribute to Fe reduction and increased solubility. The wind-blown dust and PAH-containing combustion products undergo long-range atmospheric transport leading to mixing and metal-organic interactions. The current study focuses on how a saturated PAH suspension affects the production of soluble Fe. Reactions of soil-based Fe and saturated solutions of PAH are performed under controlled conditions simulating natural sunlight. Samples are analyzed by ICPMS for soluble Fe before and after solar exposure reactions; soluble Fe is separated from total Fe by filtration and total Fe by acid-assisted microwave digestion. Data indicate an increase in Fe solubility (1.2% to 4.2%) in the presence of PAH, as compared to soil in water alone, and an even greater increase in Fe solubility (4.2% to 8.4%) when exposed to solar radiation. Research is ongoing to determine the dependence of oxidized PAH on kinetic and overall Fe solubility.

  14. Replacement of steel parts with extruded aluminum alloys in an automobile

    Science.gov (United States)

    Daggula, Manikantha Reddy

    Over the past years, vehicle emissions have shown a negative impact on environment and human health. A new strategy has been used by automakers to reduce a vehicle's weight which significantly reduce fuel consumption and C02 emissions. A very light car consumes very less fuel as it needs to overcome less inertia, decreasing the required power to movie the vehicle. Reducing weight is the easiest way to increase fuel economy and making it by just 10% can increase its efficiency 6 to 8 percent. For a normal scale 80% of vehicles weight is shared among chassis, power train and other exterior components. Almost 60% of the vehicles weight is comprised of steel and the remaining is with cast and extruded aluminum and magnesium alloys. Our main aim is to look for the parts like Fuel tank holder, Fuel filler neck, Turbo inlet assembly, and Brake lines, Dash board frame which are made from steel and replace them with extruded aluminum alloys, to analyze a conventional rear wheel aluminum drive shaft and replace it with a new design and with a new aluminum alloy. The current project involves dismantling an automobile and looking for feasible steel parts and making samples, analyzing the hardness of the samples. These parts are optimally analyzed using Ansys Finite element analysis tool, these parts are subjected to the constraints such as three-point bending, tensile testing, hydrostatic pressure and also torsional stress action on the drive shaft, the deformation and stress are observed in these parts. The results show the current steel parts can be replaced with 3000 series aluminum alloy and the drive shaft can be replaced with new design with 6061-T6 Al-alloy which decreases 25% of the shaft weight.

  15. Government Policy and Environmental Innovation in the Automobile Sector in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Aahman, Max

    2004-01-01

    The aim of this paper is to analyse the role that the Japanese Government has played, and still plays, in the development of alternatives to conventional vehicles and the effect of government policy. The focus in this paper is on battery-powered electric vehicles (BPEVs), hybrid electric vehicles (HEVs), and fuel cell electric vehicles (FCEVs) These alternatives present an interesting case of technical choices in government policy. The effects of government policy and the process of innovation are analysed from a comprehensive view drawing on the literature regarding technical change and innovation. The whole chain of government support, including the context in which these different policies have been implemented since the early 1970s, is studied. Based on this analysis, current and suggested future government policy is discussed, as the development of alternative vehicles is still an ongoing process. The Japanese Government has adopted a comprehensive strategy and drafted long-term strategic plans including R and D, demonstration and market support. This strategy has enabled the Japanese Government to influence the direction of technical development within the domestic automobile industry with relatively limited government funding. In the development process analysed here, market support have been equally important for the development process as the R and D efforts. The history of BPEVs in Japan illustrates the conventional wisdom that 'picking winners' in government policy is not easy. Our conclusion is that governments should, if possible, focus on technologies that fulfil several policy aims and which can be used in several different applications. This increases the chance of a technology surviving the long journey from idea to competitive product. This study also shows that established dominating companies do not necessarily resist radical changes in their core designs.

  16. a Study on the Mechanism of OCCUPANT'S Cervical Injury by Low Speed Rear-End Collision of Automobiles

    Science.gov (United States)

    Cho, Wonhak; Kim, Yongchul; Choi, Hyeonki

    Neck injury in rear-end car collisions is an increasing concern in the field of traffic safety. This injury commonly occurs at rear-end impact, however the injury mechanisms for whiplash remain a mystery. The purpose of this study is to quantitatively analyze the head and neck kinematics during the low-speed rear-end impact of automobiles. It is important to produce data that is related as closely as possible to the in vivo situation. So, we performed a sled test which simulated rear-end impacts with a velocity of 0.6 m/s with five normal healthy male subjects. 3-D motion analysis system was used to document motion data of two situations. When we compare the values of angular velocity and acceleration of head and neck, the peak magnitudes of inclined seated posture were smaller than those of upright seated posture. The result of this study is expected to provide insight that will aid in determining the mechanism of whiplash which is crucial to the identification of possible injury mechanisms.

  17. Rouler dans la ville. Automobilisme et démocratisation de la cité : surprenants équilibres parisiens pendant les « Trente Glorieuses » Driving in the city. Automobilism and democratisation of the city – “surprising” Parisian equilibria between 1945 and 1975

    Directory of Open Access Journals (Sweden)

    Mathieu Flonneau

    2009-05-01

    Full Text Available Si l'automobilisme n'avait été porteur que d'une culture élitaire, son acceptation profonde par les sociétés métropolitaines occidentales n'aurait pas été aussi complète. Confronté à ce phénomène fondamentalement inclusif, l'historien du social est amené à prendre en considération la réelle demande d'automobile qui s'est fait jour à Paris au cours des années 1950-1960. Dans la France des « Trente Glorieuses », la signification de la motorisation de masse témoigne du processus de démocratisation connu par un bien de consommation toujours connoté socialement mais précisément en passe de perdre son caractère de marqueur social. L'évolution du statut de l'objet automobile mérite donc de retenir l'attention, ainsi que les métamorphoses de l'accessibilité à la ville centre et de son appropriation, profondément transformées par le mode de déplacement individuel motorisé.If automobilism had been the bearer only of an elite culture, it would not have experienced such complete acceptance in western metropolitan societies. Faced with this fundamentally inclusive phenomenon, the social historian must consider the strong demand for cars seen in Paris over the years from 1950 to 1960. In the France of the “Trente Glorieuses” (1945-1975, the phenomenon of mass motorisation provides evidence of the process of democratisation experienced by a consumer good retaining social significance yet in the process of losing its role as marker of social class. The evolution of the status of the automobile thus merits attention, as do the metamorphoses of the accessibility of the city centre and of its appropriation, which were profoundly altered by the motorised means of personal transportation.

  18. A Genetic Algorithm Based Optimization Scheme To Find The Best Set Of Design Parameters To Enhance The Performance Of An Automobile Radiator

    Directory of Open Access Journals (Sweden)

    G.Chaitanya

    2013-12-01

    Full Text Available The present work aims at maximizing the overall heat transfer rate of an automobile radiator using Genetic Algorithm approach. The design specifications and empirical data pertaining to a rally car radiator obtained from literature are considered in the present work. The mathematical function describing the objective for the problem is formulated using the radiator core design equations and heat transfer relations governing the radiator. The overall heat transfer rate obtained from the present optimization technique is found to be 9.48 percent higher compared to the empirical value present in the literature. Also, the enhancement in the overall heat transfer rate is achieved with a marginal reduction in the radiator dimensions indicating better spacing ratio compared to the existing design.

  19. Environment-Aware Production Schedulingfor Paint Shops in Automobile Manufacturing: A Multi-Objective Optimization Approach.

    Science.gov (United States)

    Zhang, Rui

    2017-12-25

    The traditional way of scheduling production processes often focuses on profit-driven goals (such as cycle time or material cost) while tending to overlook the negative impacts of manufacturing activities on the environment in the form of carbon emissions and other undesirable by-products. To bridge the gap, this paper investigates an environment-aware production scheduling problem that arises from a typical paint shop in the automobile manufacturing industry. In the studied problem, an objective function is defined to minimize the emission of chemical pollutants caused by the cleaning of painting devices which must be performed each time before a color change occurs. Meanwhile, minimization of due date violations in the downstream assembly shop is also considered because the two shops are interrelated and connected by a limited-capacity buffer. First, we have developed a mixed-integer programming formulation to describe this bi-objective optimization problem. Then, to solve problems of practical size, we have proposed a novel multi-objective particle swarm optimization (MOPSO) algorithm characterized by problem-specific improvement strategies. A branch-and-bound algorithm is designed for accurately assessing the most promising solutions. Finally, extensive computational experiments have shown that the proposed MOPSO is able to match the solution quality of an exact solver on small instances and outperform two state-of-the-art multi-objective optimizers in literature on large instances with up to 200 cars.

  20. Improving the cooling performance of automobile radiator with Al2O3/water nanofluid

    International Nuclear Information System (INIS)

    Peyghambarzadeh, S.M.; Hashemabadi, S.H.; Jamnani, M. Seifi; Hoseini, S.M.

    2011-01-01

    In this paper, forced convective heat transfer in a water based nanofluid has experimentally been compared to that of pure water in an automobile radiator. Five different concentrations of nanofluids in the range of 0.1-1 vol.% have been prepared by the addition of Al 2 O 3 nanoparticles into the water. The test liquid flows through the radiator consisted of 34 vertical tubes with elliptical cross section and air makes a cross flow inside the tube bank with constant speed. Liquid flow rate has been changed in the range of 2-5 l/min to have the fully turbulent regime (9 x 10 3 4 ). Additionally, the effect of fluid inlet temperature to the radiator on heat transfer coefficient has also been analyzed by varying the temperature in the range of 37-49 o C. Results demonstrate that increasing the fluid circulating rate can improve the heat transfer performance while the fluid inlet temperature to the radiator has trivial effects. Meanwhile, application of nanofluid with low concentrations can enhance heat transfer efficiency up to 45% in comparison with pure water. - Highlights: → Application of nanofluid in the car radiator has been studied experimentally. → Heat transfer enhancement of about 45% compared to water has been recorded. → Increasing particle concentration and velocity improves heat transfer performance.

  1. Weight reduction of automobile parts using light metals. Keikinzoku shiyo ni yoru jidosha buhin no keiryoka

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, S [Toyota Motor Corp., Aichi (Japan)

    1992-12-25

    Weight reduction of automobiles is required from the viewpoint of reduction of CO2 emission and energy conservation. Comparing a car with another one of almost the same size and performance with 1% reduced weight, combustion efficiency of the latter can be improved by 0.5-0.8%. This report introduces several examples, in which steel parts are replaced with light alloy parts to reduce car weight, and describes the future perspective. Concerning a cylinder block which is the heaviest part among engine parts, a block made of aluminum alloy with no cast liner has been developed. There is also an example of an oil pan adopting aluminum die-cast for a part of it. A valve lifter made of aluminum alloy has been developed for valve system parts and has contributed to friction loss, noise reduction, and improvement of fuel consumption. As for steering system parts, a steering bracket made of Mg alloy die-cast has been developed. The use of light alloy parts, in general, increases material cost. Therefore it is now required to build up closer connection between designs and production techniques and to improve reliability of casting and forging technologies. 5 refs., 20 figs.

  2. Advanced automobile steels subjected to plate rolling at 773 K or 1373 K

    Science.gov (United States)

    Torganchuk, Vladimir; Belyakov, Andrey; Kaibyshev, Rustam

    2017-12-01

    The high manganese steels exhibiting the effects of twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) demonstrate an excellent combination of enhanced formability, strength and ductility. Such unique mechanical properties make high-manganese steel the most attractive material for various applications, including the segment of advanced automobile steels. The strain hardening in such steels can be achieved through martensitic transformation, when the stacking fault energy (SFE) is about 10 mJ m-2, and/or twinning, when SFE is about 20 to 50 mJ m-2. The actual mechanical properties of high-Mn steels could vary, depending on the conditions of thermo-mechanical processing. In the present study, the effect of rolling temperature on the microstructure and mechanical properties of 18% Mn steels was clarified. The steels hot rolled at 1373 K were characterized by uniform almost equiaxed grains with near random crystallographic orientations that resulted in relatively low yield strengths of 300-360 MPa, followed by pronounced strain hardening that led to the total elongation above 60%. In contrast, the steels warm rolled at 773 K were characterized by flattened grains with a strong rolling texture and high yield strengths of 850-950 MPa combined with a total elongation of about 30%.

  3. Assessment of airborne asbestos exposure during the servicing and handling of automobile asbestos-containing gaskets.

    Science.gov (United States)

    Blake, Charles L; Dotson, G Scott; Harbison, Raymond D

    2006-07-01

    Five test sessions were conducted to assess asbestos exposure during the removal or installation of asbestos-containing gaskets on vehicles. All testing took place within an operative automotive repair facility involving passenger cars and a pickup truck ranging in vintage from late 1960s through 1970s. A professional mechanic performed all shop work including engine disassembly and reassembly, gasket manipulation and parts cleaning. Bulk sample analysis of removed gaskets through polarized light microscopy (PLM) revealed asbestos fiber concentrations ranging between 0 and 75%. Personal and area air samples were collected and analyzed using National Institute of Occupational Safety Health (NIOSH) methods 7400 [phase contrast microscopy (PCM)] and 7402 [transmission electron microscopy (TEM)]. Among all air samples collected, approximately 21% (n = 11) contained chrysotile fibers. The mean PCM and phase contrast microscopy equivalent (PCME) 8-h time weighted average (TWA) concentrations for these samples were 0.0031 fibers/cubic centimeters (f/cc) and 0.0017 f/cc, respectively. Based on these findings, automobile mechanics who worked with asbestos-containing gaskets may have been exposed to concentrations of airborne asbestos concentrations approximately 100 times lower than the current Occupational Safety and Health Administration (OSHA) Permissible Exposure Limit (PEL) of 0.1 f/cc.

  4. FY 2000 report on the research cooperation project - Research cooperation in developmental support for oil producing countries. Joint project for the technology development for automobile maintenance in Saudi Arabia; 2000 nendo san'yukoku kaihatsu shien kenkyu kyoryoku jigyo seika hokokusho. Saujiarabia jidosha seibi gijutsu kaihatsu kyodo project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    For the purpose of spreading the technology for automobile maintenance in Saudi Arabia, an investigational study was made of the actual state of the automobile utilization environment in Saudi Arabia. In Saudi Arabia, air pollution is becoming a serious problem with the rapid progress of motorization, and measures for automobile maintenance technology should be taken such as the use of lead-free gasoline, spread of catalyst car and introduction of new engine technology. However, the number of able car mechanics with Saudi Arabian nationality is low, and they rely on workers from other countries for it. Further, usually people continuously drive cars at high speed under the severe environment where there are high temperature, solar radiation, dust, etc. As a result of the study, the following were cited as the maintenance technology of which the R and D are expected: technology for lead-free gasoline, basic education for electronics, technology for use of trouble diagnosis unit, technology of preventive maintenance supposing high speed traveling, technology for recycle use of parts, standards for maintenance of rubber parts, establishment of standards of maintenance of Saudi Arabia's own, making of technical books/data to be needed for training of Saudi Arabian engineers. (NEDO)

  5. A life-cycle comparison of alternative automobile fuels.

    Science.gov (United States)

    MacLean, H L; Lave, L B; Lankey, R; Joshi, S

    2000-10-01

    We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C2H5OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C2H5OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results. We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable, and

  6. A Life-Cycle Comparison of Alternative Automobile Fuels.

    Science.gov (United States)

    MacLean, Heather L; Lave, Lester B; Lankey, Rebecca; Joshi, Satish

    2000-10-01

    We examine the life cycles of gasoline, diesel, compressed natural gas (CNG), and ethanol (C 2 H 5 OH)-fueled internal combustion engine (ICE) automobiles. Port and direct injection and spark and compression ignition engines are examined. We investigate diesel fuel from both petroleum and biosources as well as C 2 H 5 OH from corn, herbaceous bio-mass, and woody biomass. The baseline vehicle is a gasoline-fueled 1998 Ford Taurus. We optimize the other fuel/powertrain combinations for each specific fuel as a part of making the vehicles comparable to the baseline in terms of range, emissions level, and vehicle lifetime. Life-cycle calculations are done using the economic input-output life-cycle analysis (EIO-LCA) software; fuel cycles and vehicle end-of-life stages are based on published model results. We find that recent advances in gasoline vehicles, the low petroleum price, and the extensive gasoline infrastructure make it difficult for any alternative fuel to become commercially viable. The most attractive alternative fuel is compressed natural gas because it is less expensive than gasoline, has lower regulated pollutant and toxics emissions, produces less greenhouse gas (GHG) emissions, and is available in North America in large quantities. However, the bulk and weight of gas storage cylinders required for the vehicle to attain a range comparable to that of gasoline vehicles necessitates a redesign of the engine and chassis. Additional natural gas transportation and distribution infrastructure is required for large-scale use of natural gas for transportation. Diesel engines are extremely attractive in terms of energy efficiency, but expert judgment is divided on whether these engines will be able to meet strict emissions standards, even with reformulated fuel. The attractiveness of direct injection engines depends on their being able to meet strict emissions standards without losing their greater efficiency. Biofuels offer lower GHG emissions, are sustainable

  7. A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator

    Science.gov (United States)

    Quan, Rui; Zhou, Wei; Yang, Guangyou; Quan, Shuhai

    2017-05-01

    To make full use of the maximum output power of automobile exhaust thermoelectric generator (AETEG) based on Bi2Te3 thermoelectric modules (TEMs), taking into account the advantages and disadvantages of existing maximum power point tracking methods, and according to the output characteristics of TEMs, a hybrid maximum power point tracking method combining perturb and observe (P&O) algorithm, quadratic interpolation and constant voltage tracking method was put forward in this paper. Firstly, it searched the maximum power point with P&O algorithms and a quadratic interpolation method, then, it forced the AETEG to work at its maximum power point with constant voltage tracking. A synchronous buck converter and controller were implemented in the electric bus of the AETEG applied in a military sports utility vehicle, and the whole system was modeled and simulated with a MATLAB/Simulink environment. Simulation results demonstrate that the maximum output power of the AETEG based on the proposed hybrid method is increased by about 3.0% and 3.7% compared with that using only the P&O algorithm and the quadratic interpolation method, respectively. The shorter tracking time is only 1.4 s, which is reduced by half compared with that of the P&O algorithm and quadratic interpolation method, respectively. The experimental results demonstrate that the tracked maximum power is approximately equal to the real value using the proposed hybrid method,and it can preferentially deal with the voltage fluctuation of the AETEG with only P&O algorithm, and resolve the issue that its working point can barely be adjusted only with constant voltage tracking when the operation conditions change.

  8. As relações entre estratégia de produção, TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time: estudos de caso em uma empresa do setor automobilístico e em dois de seus fornecedores The relationships between production strategy, TQM (Total Quality Management and JIT (Just-In-Time: a case study in a automobile company and in two of its suppliers

    Directory of Open Access Journals (Sweden)

    Aline Lamon Cerra

    2000-12-01

    Full Text Available Este artigo tem como objetivo discutir as relações existentes entre as Estratégias de Produção e os programas TQM (Total Quality Management ou Gestão da Qualidade Total e JIT (Just-In-Time, destacando a importância da integração destes programas às Estratégias de Produção nas empresas. O estudo desta integração demonstrou que os programas TQM e JIT, embora possam trabalhar separadamente, são complementares e devem estar alinhados com as Estratégias de Produção a fim de promover melhorias na função produção. Além disso, será verificado de que modo a empresa automobilística condiciona a difusão das estratégias e programas adotados em sua cadeia de fornecedores. Serão apresentados os conceitos básicos e questões teóricas relacionados à Estratégia de Produção, ao TQM e ao JIT, e um estudo de caso nas três empresas.This paper has the objective to discuss the existent relationships between the Manufacturing Strategy and the programs TQM - Total Quality Management and JIT - Just-In-Time, highlighting the importance of the integration between the production strategy and the other strategies of the company. Besides, the relationships will be discussed among TQM and JIT, programs that came up with the objective of promoting In the function production; the study demonstrated that those programs, although they can work separately, are complemental and should be aligned with the production strategy. Then, we will present the basic concepts and theoretical subjects related to the Production Strategy, to TQM and JIT, and a case study in a automobile company and two of its suppliers. The three companies are multinational and placed inside São Paulo. Thus, in the automobile company we will also verify the conditions of diffusion of its strategies and its programs in its supply chain.

  9. Microbial communities related to volatile organic compound emission in automobile air conditioning units.

    Science.gov (United States)

    Diekmann, Nina; Burghartz, Melanie; Remus, Lars; Kaufholz, Anna-Lena; Nawrath, Thorben; Rohde, Manfred; Schulz, Stefan; Roselius, Louisa; Schaper, Jörg; Mamber, Oliver; Jahn, Dieter; Jahn, Martina

    2013-10-01

    During operation of mobile air conditioning (MAC) systems in automobiles, malodours can occur. We studied the microbial communities found on contaminated heat exchanger fins of 45 evaporators from car MAC systems which were operated in seven different regions of the world and identified corresponding volatile organic compounds. Collected biofilms were examined by scanning electron microscopy and fluorescent in situ hybridization. The detected bacteria were loosely attached to the metal surface. Further analyses of the bacteria using PCR-based single-strand conformation polymorphism and sequencing of isolated 16S rRNA gene fragments identified highly divergent microbial communities with multiple members of the Alphaproteobacteriales, Methylobacteria were the prevalent bacteria. In addition, Sphingomonadales, Burkholderiales, Bacillales, Alcanivorax spp. and Stenotrophomonas spp. were found among many others depending on the location the evaporators were operated. Interestingly, typical pathogenic bacteria related to air conditioning systems including Legionella spp. were not found. In order to determine the nature of the chemical compounds produced by the bacteria, the volatile organic compounds were examined by closed loop stripping analysis and identified by combined gas chromatography/mass spectrometry. Sulphur compounds, i.e. di-, tri- and multiple sulphides, acetylthiazole, aromatic compounds and diverse substituted pyrazines were detected. Mathematical clustering of the determined microbial community structures against their origin identified a European/American/Arabic cluster versus two mainly tropical Asian clusters. Interestingly, clustering of the determined volatiles against the origin of the corresponding MAC revealed a highly similar pattern. A close relationship of microbial community structure and resulting malodours to the climate and air quality at the location of MAC operation was concluded.

  10. Study of the Fatigue Life and Weight Optimization of an Automobile Aluminium Alloy Part under Random Road Excitation

    Directory of Open Access Journals (Sweden)

    A. Saoudi

    2010-01-01

    Full Text Available Weight optimization of aluminium alloy automobile parts reduces their weight while maintaining their natural frequency away from the frequency range of the power spectral density (PSD that describes the roadway profile. We present our algorithm developed to optimize the weight of an aluminium alloy sample relative to its fatigue life. This new method reduces calculation time; It takes into account the multipoint excitation signal shifted in time, giving a tangle of the constraint signals of the material mesh elements; It also reduces programming costs. We model an aluminium alloy lower vehicle suspension arm under real conditions. The natural frequencies of the part are inversely proportional to the mass and proportional to flexural stiffness, and assumed to be invariable during the process of optimization. The objective function developed in this study is linked directly to the notion of fatigue. The method identifies elements that have less than 10% of the fatigue life of the part's critical element. We achieved a weight loss of 5 to 11% by removing the identified elements following the first iteration.

  11. Estratégias competitivas e desempenho da indústria automobilística no Brasil

    Directory of Open Access Journals (Sweden)

    Rodrigo Morem da Costa

    Full Text Available Resumo Nos anos 1990, a indústria automobilística brasileira experimentou um processo de reestruturação induzido pela mudança nas estratégias de concorrência das montadoras e pelas transformações na economia nacional. O trabalho analisou como ocorreu esse processo no período 1989-2013 desde uma concepção teórica Evolucionária. A reestruturação levou à redução do hiato tecnológico em veículos e em processos de fabricação, frente ao observado em países avançados. Isto se manifestou por meio de investimentos em modernização das plantas existentes e em abertura de novas unidades de produção. O resultado foi um expressivo aumento de produção, produtividade e consumo de autoveículos, que alçaram o Brasil à 7ª posição no ranking de países produtores e à 4ª no de vendas domésticas, consolidando sua condição de plataforma regional de fabricação para o mercado sul-americano. Ademais, algumas das subsidiárias brasileiras chegaram a um nível de domínio da tecnologia, que as habilitaram ao desenvolvimento autônomo de novos autoveículos.

  12. Deep Learning-Based Gaze Detection System for Automobile Drivers Using a NIR Camera Sensor.

    Science.gov (United States)

    Naqvi, Rizwan Ali; Arsalan, Muhammad; Batchuluun, Ganbayar; Yoon, Hyo Sik; Park, Kang Ryoung

    2018-02-03

    A paradigm shift is required to prevent the increasing automobile accident deaths that are mostly due to the inattentive behavior of drivers. Knowledge of gaze region can provide valuable information regarding a driver's point of attention. Accurate and inexpensive gaze classification systems in cars can improve safe driving. However, monitoring real-time driving behaviors and conditions presents some challenges: dizziness due to long drives, extreme lighting variations, glasses reflections, and occlusions. Past studies on gaze detection in cars have been chiefly based on head movements. The margin of error in gaze detection increases when drivers gaze at objects by moving their eyes without moving their heads. To solve this problem, a pupil center corneal reflection (PCCR)-based method has been considered. However, the error of accurately detecting the pupil center and corneal reflection center is increased in a car environment due to various environment light changes, reflections on glasses surface, and motion and optical blurring of captured eye image. In addition, existing PCCR-based methods require initial user calibration, which is difficult to perform in a car environment. To address this issue, we propose a deep learning-based gaze detection method using a near-infrared (NIR) camera sensor considering driver head and eye movement that does not require any initial user calibration. The proposed system is evaluated on our self-constructed database as well as on open Columbia gaze dataset (CAVE-DB). The proposed method demonstrated greater accuracy than the previous gaze classification methods.

  13. Cars Gone Wild: The Major Contributor to Unintended Acceleration in Automobiles is Pedal Error.

    Science.gov (United States)

    Schmidt, Richard A; Young, Douglas E

    2010-01-01

    "Unintended-acceleration" automobile accidents typically begin when the driver first enters the car, starts the engine, and intends to press his/her right foot on the brake while shifting from Park to a drive gear (Drive or Reverse). The driver reports an unintended (uncommanded) full-throttle acceleration, coupled with a loss of braking, until the episode ends in a crash. Pedal misapplications - where the right foot contacts the accelerator instead of the brake that was intended - have been linked to these accidents (Schmidt, 1989, 1993) which, in the 1980s, were thought to occur only at the start of a driving cycle (and/or with the car in Park). But, in 1997, we identified over 200 pedal errors as the cause of accidents reported in the North Carolina database; these crashes occurred during the driving cycle (Schmidt et al., 1997), and/or with the vehicle in a gear other than Park. Our present work provides a more thorough analysis of these North Carolina Police Accident Reports from 1979 to 1995. The vast majority of pedal misapplications (over 92%) (a) occurred during the driving cycle, (b) were generally in "unhurried" conditions, and (c) were categorically separate from those events referred to as unintended-acceleration episodes at start-up. These ideas are explanatory for the recent (2009-2010) surge of unintended-acceleration reports, perhaps even suggesting that all of these crashes are caused by pedal errors, and that none of them are based on some vehicle defect(s).

  14. Plant pollution from lead produced by automobile exhaust system near certain highways of Iran

    International Nuclear Information System (INIS)

    Rahmani, H.R.; Kalbasi, M.; Hajrasuliha, Sh.

    2001-01-01

    Plants polluted with Pb produced by automobiles along the roads and highways have extensively been reported all over the world. It is the most important source of pollution in the environment. This research was carried out to determine the polluting degree of plants along the highways such as: Rasht-Anzaly, Kelachay-Ramsar, Tehran-Karaj, and Isfahan-Tehran. At each arbitrary point, a transect 100 meters long perpendicular to the highway was selected for sampling. Along each transect, plants were sampled at 15 cm above the ground, in different distances from the highway. Samples were transported to the laboratory and analyzed by a standard method. The average concentration of total Pb determined in Anzali, Ramsar, Karaj and Delijan (east and west of the road) areas respectively were 114.5, 58.3, 260.2, 75.1 and microgram per gram dry plant weight. Total Pb content in plants along the roads were high and exponentially decreasing with distance from the roadside. Pb concentration in plants were higher than threshold of Standard, so the risk of entrain g of this poisonous element in nutrition system along the roads is very considerable. The plants were polluted from medium degree up to a very high degree. The rate of pollution in plant samples is very high in Karaj area, high in Anzali area, and medium in Ramsar and Delijan areas. Plant pollution was directly related to the traffic volume in road

  15. Analyzing panel acoustic contributions toward the sound field inside the passenger compartment of a full-size automobile.

    Science.gov (United States)

    Wu, Sean F; Moondra, Manmohan; Beniwal, Ravi

    2015-04-01

    The Helmholtz equation least squares (HELS)-based nearfield acoustical holography (NAH) is utilized to analyze panel acoustic contributions toward the acoustic field inside the interior region of an automobile. Specifically, the acoustic power flows from individual panels are reconstructed, and relative contributions to sound pressure level and spectrum at any point of interest are calculated. Results demonstrate that by correlating the acoustic power flows from individual panels to the field acoustic pressure, one can correctly locate the panel allowing the most acoustic energy transmission into the vehicle interior. The panel on which the surface acoustic pressure amplitude is the highest should not be used as indicative of the panel responsible for the sound field in the vehicle passenger compartment. Another significant advantage of this HELS-based NAH is that measurements of the input data only need to be taken once by using a conformal array of microphones in the near field, and ranking of panel acoustic contributions to any field point can be readily performed. The transfer functions between individual panels of any vibrating structure to the acoustic pressure anywhere in space are calculated not measured, thus significantly reducing the time and effort involved in panel acoustic contributions analyses.

  16. Les possibilités de limitation des émissions de plomb par les véhicules automobiles Possibilities of Limiting Leaded Exhaust from Automotive Vehicles

    Directory of Open Access Journals (Sweden)

    Roth J.

    2006-11-01

    Full Text Available Les additifs plombés permettent de satisfaire les besoins en octane des moteurs automobiles actuels. Dans le cadre de la lutte contre la pollution automobile, il est envisagé de réduire ou de supprimer le plomb présent dans les carburants. La suppression brutale, tout en présentant certains avantages, entraîne de nombreux inconvénients, d'ordre purement technique mais également d'ordre financier. La mise au point d'un dispositif de captation, par les sociétés Texaco et Octel, semble permettre d'envisager de maintenir la présence de plomb dans les carburants, tout en réduisant les émissions à l'échappement. Les travaux effectués à l'UTAC ont permis de tester ces dispositifs sur une endurance de 31 000 km. Les résultats obtenus ont permis de dégager un gain d'efficacité d'environ 60 %, les paramètres, bruit et pollution (CO et HC restant par ailleurs inchangés. Leaded additives enable the octane requirements of existing automotive engines to be satisfied. However, as part of the fight against automotive pollution, plans are being drawn up to reduce or eliminate the lead present in fuels. A sudden elimination, although having some advantages, would create a great many disadvantages of a purely technical as well as financiel nature. Texaco and Octet have developed a trapping device that appears to enable lead to be retained in fuels at the same time as reducing exhaust emissions. This device has undergone a 31,000-kilometer endurance test at UTAC. The results reveal an efficiency gain of 60 %, while the noise and pollution (CO and HC parameters remain the same.

  17. Experimental Investigation of an Automobile Air-Conditioning System using Integrated Brushless Direct Current Motor Rotary Compressor

    Directory of Open Access Journals (Sweden)

    Sukri M.F.

    2016-01-01

    Full Text Available The present study presents an experimental investigation on the effect of condenser air inlet temperature and dimensionless parameter of X on the performance of automobile air-conditioning (AAC system using integrated brushless direct current motor-rotary compressor and electronic expansion valve. The other components of AAC system are from original component of AAC system used for medium size passenger car. The experimental results showed that the increment of the condenser air inlet temperature and X caused an increase in condensing temperature, cooling capacity and compressor work, while decreasing the coefficient of performance (COP. Meanwhile, the evaporating temperature increase with the increment of condenser air inlet temperature, but decrease with decrement of X. In general, AAC system have to work at higher value of X in order to produce more cooling capacity, thereby increment in compressor work also occurs due to energy balance. However, at higher value of X, the COP of the system dropped due to dominant increase in compressor power, as opposed to a rise in cooling capacity. Due to this reason, the best operation of this compressor occurs at X = 4.96 for constant T5 (35ºC, or at T5 = 30ºC for constant X (4.96.

  18. Technical Feasibility Evaluation on The Use of A Peltier Thermoelectric Module to Recover Automobile Exhaust Heat

    Science.gov (United States)

    Sugiartha, N.; Sastra Negara, P.

    2018-01-01

    A thermoelectric module composes of integrated p-n semiconductors as hot and cold side junctions and uses Seebeck effect between them to function as a thermoelectric generator (TEG) to directly convert heat into electrical power. Exhaust heat from engines as otherwise wasted to the atmosphere is one of the heat sources freely available to drive the TEG. This paper evaluates technical feasibility on the use of a Peltier thermoelectric module for energy recovery application of such kind of waste heat. An experimental apparatus has been setup to simulate real conditions of automobile engine exhaust piping system. It includes a square section aluminium ducting, an aluminium fin heat sink and a TEC1 12706 thermoelectric module. A heater and a cooling fan are employed to simulate hot exhaust gas and ambient air flows, respectively. Electrical loading is controlled by resistors. Dependent variables measured during the test are cold and hot side temperatures, open and loaded circuit output voltages and electrical current. The test results revealed a promising application of the Peltier thermoelectric module for the engine exhaust heat recovery, though the loaded output power produced and loaded output voltage are still far lower than the commercially thermoelectric module originally purposed for the TEG application.

  19. 28 June 2017 - Italian Agnelli Foundation Vice Chairman, and Fiat Chrysler Automobiles Chairman, J. Elkann signing the guest book with CERN Director-General F. Gianotti

    CERN Multimedia

    Bennett, Sophia Elizabeth

    2017-01-01

    from left to right in 53__MA27642: Scuola di Alta Formazione al Management Project manager R. Movva; Agnelli Foundation Director A. Gavosto; Agnelli Foundation Head of Innovation A. Griva; Scuola di Alta Formazione al Management Director S. Pettochi; Agnelli Foundation Vice Chairman, and Fiat Chrysler Automobiles Chairman J. Elkann; CERN Director-General F. Gianotti; Director for International Relations C. Warakaulle; Management Liaison for the Italian Republic, Engineering Department Head R. Losito; Knowledge Transfer Group Leader G. Anelli. Signature of the Framework agreement between the Scuola di Alta Formazione al Management, represented by Director S. Petocchi and CERN, represented by Director-General F. Gianotti, witnessed by Agnelli Foundation Vice Chairman J. Elkann.

  20. Analysis on Anhui New Energy Automobile Marketing and Strategy%安徽省新能源汽车营销策略分析

    Institute of Scientific and Technical Information of China (English)

    张莉

    2016-01-01

    在中国的新能源汽车发展战略中,安徽积极响应并形成了以江淮、奇瑞为核心基地的新能源汽车带,安徽成为国家自主研发的重要战场,迎来了整个新能源汽车产业的革新。安徽新能源汽车的市场潜力巨大。然而也存在一些新能源汽车品牌知名度不高、推广力度不够、营销渠道不完善等问题,这将成为安徽新能源汽车销售瓶颈。文章旨在探讨如何建立牢靠的新能源汽车营销体系,改变传统的新能源汽车营销方式,用现代新型的营销策略来带动安徽省新能源汽车的长足进步。%In Chinaˊs new energy vehicle development strategy,Anhui actively responses in the formation of the core base of new energy vehicles in the JAC,Chery. Anhui became an important battleground for national inde-pendent development,which ushered in the new energy automotive industry innovation. Anhui new energy vehi-cle market has great potential. However,there are some new energy automotive brands whose awareness is not high,inadequate promotion,and marketing channels are not perfect,which will become a new energy vehicle sales in Anhui bottleneck. The purpose of this paper is to explore how to establish a reliable new energy auto-mobile marketing system,change the traditional new energy automobile promotion and marketing,with a new modern marketing strategy to promote the considerable progress of Anhui new energy vehicles.

  1. Alternative drives for motor cars. Hybrid systems, fuel cells, alternative energy sources. 2. enl. ed.; Alternative Antriebe fuer Automobile. Hybridsysteme, Brennstoffzellen, alternative Energietraeger

    Energy Technology Data Exchange (ETDEWEB)

    Stan, Cornel [Berkeley Univ., CA (United States)]|[Paris Univ. (France)]|[Pisa Univ. (Italy)]|[Perugia Univ. (Italy)]|[Westsaechsischen Hochschule Zwickau (Germany)

    2008-07-01

    The implementation possibilities of future drive concepts - from hybrid systems comprising an electric motor and an internal combustion engine to fuel cells to alternative fuels like hydrogen or alcohol - will depend largely on quality criteria, e.g. power density, rotary momentum, acceleration characteristics, specific energy consumption, emissions of chemical substances, and noise. The boundary criteria for the introduction of realizeable concepts of alternative drives for motor cars will be defined by the availability and storability of the envisaged fuels, technical complexity, cost, safety, infrastructure and service. The book presents and analyzes the processes, drives and energy sources that can be combined in complex energy management systems for motor cars in accordance with the aforementioned criteria. Knowledge about these facts is indispensable for the development of new concepts. The 2nd edition describes many new developments in car propulsion systems as well as their combinations, new energy sources, energy converters and energy stores. All contents and literature reflect the latest state of science and technology. (orig.) [German] Ueber die Realisierungsmoeglichkeiten zukuenftiger Antriebskonzepte - von Hybridsystemen Elektro-/Verbrennungsmotor ueber Brennstoffzellen bis zu alternativen Energietraegern wie Wasserstoff oder Alkohol - werden fundierte Kriterien der Qualitaet eines Antriebs entscheiden. Leistungsdichte, Drehmomentverlauf, Beschleunigungscharakteristik, spezifischer Energieverbrauch sowie Emission chemischer Stoffe und Geraeusche sind dafuer wichtige Merkmale zur Qualitaetsbeurteilung. Die Verfuegbarkeit und die Speicherfaehigkeit vorgesehener Energietraeger, die technische Komplexitaet, Kosten, Sicherheit, Infrastruktur und Service werden die Randbedingungen fuer die Einfuehrung realisierbarer Konzepte alternativer Antriebe fuer Automobile stellen. Die Uebersicht und die Analyse der Prozesse, Antriebsmaschinen und Energietraeger, die

  2. Study of the damage processes induced by thermal fatigue in stainless steels F17TNb and R20-12 for automobile application; Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile

    Energy Technology Data Exchange (ETDEWEB)

    Bucher, L.

    2004-12-15

    Thermal cycling is the main cause of fatigue failure in automobile exhaust manifolds for which the use of stainless steel now rivals that of cast iron which has been traditionally used. An original fatigue test has been developed by Ugine and ALZ, a stainless steel producer, so as to be able to compare different grades of stainless steel alloys. This test is representative of the thermal conditions encountered in the critical zones of exhaust manifolds. However, it has revealed significant differences in damage processes in the ferritic and austenitic grades tested. The subject of this thesis is the damage processes induced by thermal fatigue in stainless steels used for automotive exhaust manifolds. Two stainless steels were studied: a ferritic grade, F17TNb (17%Cr and stabilized with Ti and Nb), and an austenitic grade, R20-12, containing 20% Cr and 12% Ni. The first objective was to understand the different damage processes induced by thermal fatigue in the ferritic and austenitic grades. The second was to develop a numerical design tool of the thermally tested structures. (author)

  3. Heart rate and core temperature responses of elite pit crews during automobile races.

    Science.gov (United States)

    Ferguson, David P; Bowen, Robert S; Lightfoot, J Timothy

    2011-08-01

    There is limited information regarding the physiological and psychological demands of the racing environment, and the subsequent effect on the performance of pit crew athletes. The purpose of this study was to evaluate heart rates (HRs) and core body temperatures (CTs) of pit crew athletes in the race environment. The HR and CT of pit crew athletes (n = 7) and control subjects were measured during 6 National Association for Stock Car Automobile Racing Sprint Cup races using ingestible sensors (HQ Inc, Palmetto, FL, USA). The HR and CT were measured before each race, at 15-minute intervals during the race, and upon completion of each pit stop. Compared to the control subject at each race, the pit crew athletes had significantly (p = 0.014) lower core temperatures (CTs). The pit crew athletes displayed higher HRs on the asphalt tracks than on concrete tracks (p = 0.011), and HR responses of the crew members were significantly (p = 0.012) different between pit crew positions, with the tire changers and jackman exhibiting higher HRs than the tire carriers. Unexpectedly, the CTs of the pit crew athletes were not elevated in the race environment, despite high ambient temperatures and the extensive fire-protection equipment (e.g., helmet, suit, gloves) each pit crew athlete wore. The lack of CT change is possibly the result of the increased HR more efficiently shunting blood to the skin and dissipating heat as a consequence of the athletes' extensive training regimen and ensuing heat acclimation. Additionally, it is possible that psychological stress unique to several of the tracks provided an additive effect resulting in increased heart rates.

  4. Multinational automobile manufacture enterprise internationalization management strategy——take Toyota Automobile as example%跨国汽车制造企业国际化经营战略及启示——以丰田汽车为例

    Institute of Scientific and Technical Information of China (English)

    周文辉; 钱春丽

    2011-01-01

    本文以日本丰田汽车公司为研究对象,对其国际化经营轨迹和经营战略进行了比较研究。先对其国际化历程进行了追溯,进而提炼其国际化经营战略的共性特点,分析了其国际化经营的优势来源,最后结合我国汽车制造企业国际化发展现状给出我国同业企业国际化经营战略制定与实施的对策建议。%General Toyota of Japan were taken as examples for the purpose of comparison study on their processes and strategies in the course of globalization.Globalization processe was firstly introduced and then similarities in globalization strategie was drawn from history study.Sources of competitiveness was also analyzed.In the end suggestions on globalization were given to our local automobile manufacturers on the basis of environmental analysis.

  5. Research on Forming Mechanisms and Controlling Measurements for Surface Light Spot Defects of Galvanizing Steel Coils for Automobile Use

    Science.gov (United States)

    Guangmin, Wei; Haiyan, Sun; Jianqiang, Shi; Lianxuan, Wang; Haihong, Wu

    When producing high surface quality galvanizing steel coils for automobile use, there are always many light spots on the surface since Hansteel CGL No.1 has been put into operation. The defect samples were analyzed by SEM and EDS. The result shows that cause for light spot is not only one. There are more Mn and P in high strength auto sheet, which can result in difficulty to be cleaned off the oxide on the hot rolled coils, so the defects coming. This is why the defects come with high strength auto sheet. When coils galvanized, the defects can't be covered up. To the contrary, the defects will be more obvious when zinc growing on the surface. And sometimes zinc or residue can adhere to work rolls when strips passing through SPM. The deposits then press normal coating. So the light spots come more. When the defect comes from pressing, there is no defect on steel base. The causation is found and measures were taken including high pressure cleaning equipments adopted. Result shows that the defects disappeared.

  6. Treatment of waste water miscible cutting fluids in automobile manufacturing; Jidosha kogyo ni okeru suiyosei sessakuyuzai no haieki shori

    Energy Technology Data Exchange (ETDEWEB)

    Ono, H. [Yushiro Chemical Industry Co. Ltd., Tokyo (Japan)

    1995-09-01

    Water-soluble cutting fluids are able to be used for several months to several years if the proper periodical management is carried out. However, the used solution should be treated as waste water when the function-recovery thereof becomes remarkable difficult. On this occasion, the treated solution (drainage) ought to meet the environmental standards prescribed for the purpose of protecting globe environment. Many cases in Japan are that the strict rules are set by each urban and rural prefectures addition to the government ordinance. For carrying out the treatment of waste water efficiently, it is necessary to construct the treating system by mastering the characteristics of waste water and selecting the most suitable one from numerous treating methods. In this paper, after the description on the water-polluting substances and drainage standards, the general treating method of waste water miscible cutting fluids is described. Finally, the concrete cases with respect to the treatment of waste water treatment in automobile manufacturing factories are introduced. 5 refs., 5 figs., 5 tabs.

  7. Deep Learning-Based Gaze Detection System for Automobile Drivers Using a NIR Camera Sensor

    Directory of Open Access Journals (Sweden)

    Rizwan Ali Naqvi

    2018-02-01

    Full Text Available A paradigm shift is required to prevent the increasing automobile accident deaths that are mostly due to the inattentive behavior of drivers. Knowledge of gaze region can provide valuable information regarding a driver’s point of attention. Accurate and inexpensive gaze classification systems in cars can improve safe driving. However, monitoring real-time driving behaviors and conditions presents some challenges: dizziness due to long drives, extreme lighting variations, glasses reflections, and occlusions. Past studies on gaze detection in cars have been chiefly based on head movements. The margin of error in gaze detection increases when drivers gaze at objects by moving their eyes without moving their heads. To solve this problem, a pupil center corneal reflection (PCCR-based method has been considered. However, the error of accurately detecting the pupil center and corneal reflection center is increased in a car environment due to various environment light changes, reflections on glasses surface, and motion and optical blurring of captured eye image. In addition, existing PCCR-based methods require initial user calibration, which is difficult to perform in a car environment. To address this issue, we propose a deep learning-based gaze detection method using a near-infrared (NIR camera sensor considering driver head and eye movement that does not require any initial user calibration. The proposed system is evaluated on our self-constructed database as well as on open Columbia gaze dataset (CAVE-DB. The proposed method demonstrated greater accuracy than the previous gaze classification methods.

  8. Domestic and overseas situations of Japanese automobile industries; Jidosha gijutsu. Jidosha wo torimaku shojosei

    Energy Technology Data Exchange (ETDEWEB)

    Kawahara, H. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1998-08-01

    The economic circumstances in 1997 are characterized by a high rule in the United States, slow developmental trend in Europe and lagging situations in Asia. The political and economic situations of main counties in the world are summarized with indication of Japanese dull activities, financial crisis and their countermeasures as well as the trade friction in 1998. The number of cars sold in Japan decreased to 3.71 millions in 1997 from 4.55 millions of 1996, while cars imported amounted to 360,000 in 1997 (-14.7% compared to that of the preceding year), the number of exported cars were 4.55 millions as compared to 3.71 millions in the preceding year, namely about 23% increase, of which 1.41 millions for North America and 1.25 millions for Europe. Other evolutional facts are also presented zone by zone. Then, questions which the Japanese automobile industries are faced to are enumerated and explained. The overseas production bases and their activity trends are mentioned, focusing on the modular production system as well as the lean production system as for the international expansion of the products, whereas market strategies with direct injection engine, low emission, hybrid car and so on are described in terms of technical development. Lastly, and innovation of physical distribution tat takes place in the United States such as a movement to a larger scale dealer system, car dealing business through internet and so forth are mentioned including the Japanese trials in line with these matters forecasting an ever-intensive concurrent. 5 refs., 5 tabs.

  9. Combined effects of ototoxic solvents and noise on hearing in automobile plant workers in Iran.

    Science.gov (United States)

    Mohammadi, Saber; Labbafinejad, Yasser; Attarchi, Mirsaeed

    2010-09-01

    Exposure of workers to mixtures of organic solvents and to occupational noise is frequent in a number of industries. Recent studies suggest that exposure to both can cause a more severe hearing loss than exposure to noise alone. Our cross-sectional study included 411 workers of a large automobile plant divided in three groups. The first group included assembly workers exposed to noise alone; the second included workers in a new paint shop, who were exposed to a mixture of organic solvents at a permissible level; and the third group included paint shop workers exposed to both noise and higher than permissible levels of organic solvents in an old paint shop. These groups were compared in terms of low-frequency hearing loss (model 1; average hearing threshold >25 dB at 0.5 kHz, 1 kHz, and 2 kHz) and high-frequency hearing loss (model 2; average hearing threshold >25 dB at 3 kHz, 4 kHz, 6 kHz, and 8 kHz). High-frequency hearing loss was more common in workers exposed to a combination of noise and mixed organic solvents even at permissible levels than in workers exposed to noise alone even after correction for confounding variables. This study shows that combined exposure to mixed organic solvents and occupational noise can exacerbate hearing loss in workers. Therefore, an appropriate hearing protection programme is recommended, that would include short-interval audiometric examinations and efficient hearing protectors.

  10. Development and environment of new electric automobile, `Ecovehicle`; Shingata denki jidosha eko vehicle kaihatsu to kankyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, H [National Inst. for Environmental Studies, Tsukuba (Japan)

    1996-10-27

    This paper introduces history of the development of an electric automobile, `Ecovehicle`. It is provided with a high overall energy efficiency compared with an engine vehicle. The Ecovihicle is 1.2m in width, 3.3m in length, 2 seating capacities and 910kg in overall weight with serially connected 56 batteries of each 4V, 40Ah and having the total weight of 269kg. Its travel distance per charging is 130km at a speed of 80 k.p.h. This vehicle is capable of running with an energy of approximately one third as much as that of a light car. In addition, the vehicle is provided with polycrystal solar batteries placed on 0.6m{sup 2} area on the roof and spoiler generating 60W maximum. Assuming the annual duration of sunshine is 1,800 hours, charging is possible for 63kWh annually. Assuming the charging efficiency is 83%, charging is possible about seven times, which is an equivalent of travelling about 1,000km annually. The characteristics for example are the employment of brushless DC motor, use of energy saving switching element IGBT in order to realize a low level of loss in the inverter, in-wheel motor system, and storage of storage batteries in a hollow aluminum frame installed under the floor. 2 refs., 5 figs., 1 tab.

  11. Estimating the changes in the distribution of energy efficiency in the U.S. automobile assembly industry

    International Nuclear Information System (INIS)

    Boyd, Gale A.

    2014-01-01

    This paper describes the EPA's voluntary ENERGY STAR program and the results of the automobile manufacturing industry's efforts to advance energy management as measured by the updated ENERGY STAR Energy Performance Indicator (EPI). A stochastic single-factor input frontier estimation using the gamma error distribution is applied to separately estimate the distribution of the electricity and fossil fuel efficiency of assembly plants using data from 2003 to 2005 and then compared to model results from a prior analysis conducted for the 1997–2000 time period. This comparison provides an assessment of how the industry has changed over time. The frontier analysis shows a modest improvement (reduction) in “best practice” for electricity use and a larger one for fossil fuels. This is accompanied by a large reduction in the variance of fossil fuel efficiency distribution. The results provide evidence of a shift in the frontier, in addition to some “catching up” of poor performing plants over time. - Highlights: • A non-public dataset of U.S. auto manufacturing plants is compiled. • A stochastic frontier with a gamma distribution is applied to plant level data. • Electricity and fuel use are modeled separately. • Comparison to prior analysis reveals a shift in the frontier and “catching up”. • Results are used by ENERGY STAR to award energy efficiency plant certifications

  12. BUSINESS PROCESSES OPTIMIZATION WITHIN UKRAINIAN AUTOMOBILE ENTERPRISES IN TERMS OF EU ENTERING PERIOD

    Directory of Open Access Journals (Sweden)

    Oleksandr Pidmurniak

    2017-11-01

    Full Text Available The purpose of the paper is to summarize and present the most common principles and management methods to seek the most efficient and profitable exit way for automobile enterprises during the period of economic recovery in Ukraine. In the course of the research, we have analysed what is SOA (Service Oriented Architecture and advantages of its implementation, the differences between BPMs and IBPMs (Intelligent Business Process Management Suite and other. Methodology. The survey is based on a comparison of different business and management approaches whereby the efficiency of business process sufficiently increases. In total, more than 30 methods are precisely analysed, around 15 most frequent management systems considered, which led us to identify 5 main recommendations. Results of the survey showed that Ukraine has very ignorant social and political environment, human capital is undeveloped and less meritocratic than our neighbours in EU have. A shortage in domestic car manufacturing, lack of new plants and technologies, as the resulting amount of workplaces remains the same or going down because of emigration, all that conduce to the growth of a number of imported cars. Trying to recognize the most recent threatens, we have detected there are no government programs, grants, laboratories, and science-plants for the young generation. Practical implications. Since Ukraine become in war, the economic and political crisis, downturn with national currency etc., domestic households faced with the huge amount of problems: inflation, collapsing currency rate, political uncertainty. All of that drives domestic business to a corner, where the growth of management efficiency and organizational transformation were the only way out. Value/originality. An Agile is a method when the company's management comes in touch with the latest business process optimization Apps like IBM, SoftwareAG, Pegasystems.

  13. Energy Optimization for a Weak Hybrid Power System of an Automobile Exhaust Thermoelectric Generator

    Science.gov (United States)

    Fang, Wei; Quan, Shuhai; Xie, Changjun; Tang, Xinfeng; Ran, Bin; Jiao, Yatian

    2017-11-01

    An integrated starter generator (ISG)-type hybrid electric vehicle (HEV) scheme is proposed based on the automobile exhaust thermoelectric generator (AETEG). An eddy current dynamometer is used to simulate the vehicle's dynamic cycle. A weak ISG hybrid bench test system is constructed to test the 48 V output from the power supply system, which is based on engine exhaust-based heat power generation. The thermoelectric power generation-based system must ultimately be tested when integrated into the ISG weak hybrid mixed power system. The test process is divided into two steps: comprehensive simulation and vehicle-based testing. The system's dynamic process is simulated for both conventional and thermoelectric powers, and the dynamic running process comprises four stages: starting, acceleration, cruising and braking. The quantity of fuel available and battery pack energy, which are used as target vehicle energy functions for comparison with conventional systems, are simplified into a single energy target function, and the battery pack's output current is used as the control variable in the thermoelectric hybrid energy optimization model. The system's optimal battery pack output current function is resolved when its dynamic operating process is considered as part of the hybrid thermoelectric power generation system. In the experiments, the system bench is tested using conventional power and hybrid thermoelectric power for the four dynamic operation stages. The optimal battery pack curve is calculated by functional analysis. In the vehicle, a power control unit is used to control the battery pack's output current and minimize energy consumption. Data analysis shows that the fuel economy of the hybrid power system under European Driving Cycle conditions is improved by 14.7% when compared with conventional systems.

  14. Water-Based Automobile Paints Potentially Reduce the Exposure of Refinish Painters to Toxic Metals

    Directory of Open Access Journals (Sweden)

    Der-Jen Hsu

    2018-05-01

    Full Text Available Exposure to lead-containing dusts is a global public health concern. This work addresses an important issue of whether eco-friendly water-based paints reduce the exposure potential of auto-repainting workers to metals. With this aim, metal levels in automobile paints and worker metal exposure were measured using both solvent- and water-based paints. The levels of metals, and particularly Pb, Cr (total, Fe, and Cu, in solvent-based paints varied greatly among colors and brands. Lead concentrations ranged from below the detection limit (~0.25 μg/g to 107,928 μg/g (dry film across all samples. In water-based paints, the concentrations of Pb and Cr (total were generally two to three orders of magnitude lower, but the concentrations of Al and Cu exceeded those in some solvent-based paints. The personal short-term exposure of workers who applied water-based paints of popular colors, such as black and white, were generally low, with Pb levels of less than <4 µg/m3 and Cr (total levels of less than 1 µg/m3. Conversely, mean short-term exposure to Pb during the painting of a yellow cab using solvent-based paints were 2028 µg/m3, which was ~14 times the Taiwan short-term permissible exposure limit, while the mean level of exposure to Cr (total was 290 µg/m3, which was well below the exposure limit. This study demonstrates that water-based paints reduce the exposure potential to lead, and highlights the importance of source control in limiting the toxic metals in paints.

  15. Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

    Science.gov (United States)

    Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

    2012-01-01

    To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

  16. Multi-Level Contact Oxidation Process Performance When Treating Automobile Painting Wastewater: Pollutant Removal Efficiency and Microbial Community Structures

    Directory of Open Access Journals (Sweden)

    Yufang Zhu

    2017-11-01

    Full Text Available This study applied a multi-level contact oxidation process system in a pilot-scale experiment to treat automobile painting wastewater. The experimental wastewater had been pre-treated through a series of physicochemical methods, but the water still contained a high concentration of chemical oxygen demand (COD and had poor biodegradability. After the biological treatment, the COD concentration of effluent could stay below 300 mg/L. The study analyzed the effects of hydraulic residence time (HRT on COD, ammonia nitrogen (NH4+-N, and total nitrogen (TN. The optimal HRT was 8 h; at that time, removal efficiencies of COD, ammonia nitrogen, and total nitrogen were 83.8%, 86.3%, and 65%, respectively. The system also greatly reduced excess sludge production; the removal efficiency was 82.8% with a HRT of 8 h. The study applied high-throughput pyrosequencing technology to evaluate the microbial diversity and community structures in distinct stages of the biological reactor. The relevance between process performance and microbial community structure was analyzed at the phylum and class level. The abundant Firmicutes made a large contribution to improving the biodegradability of painting wastewater through hydrolysis acidification and reducing sludge production through fermentation in the biological reactor.

  17. Characterization of surface layers of aluminum alloys for automobile body panels; Jidoshayo aluminium gokin no hyomen kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, K; Takagi, Y [Nippon Steel Corp., Tokyo (Japan)

    1996-03-29

    This paper reports analytical examples, on an oxidized film on the surface of aluminum alloys for automobiles, using the conventional method for a surface analysis or a new method entirely different from it. For example, (1) a new method was proposed which evaluated the thickness of MgO layers on the surface of Al-Mg alloy by means of a colorimeter. In the case where the thickness of the oxidized film was several tens of nanometers or less, the chromatic value of L, b, etc., and the thickness of the films were in one-to-one correspondence to each other; therefore, the MgO film was easily estimated non-destructively by measuring the chromatic values of the surface. (2) An analysis was made on the state of adhesion of the organic matters in the oxidized film on Al-Mg-Si alloy by means of an angle-resolved XPS (X-ray photoelectron spectroscopy) depth analysis. Consequently, it was elucidated that a fatty film adhered with hydrophilic groups faced to the oxidized surface and with hydrophobic groups faced to the outside, and that this adhered fatty acid also formed a metallic soap by a heat treatment, deteriorating the fattiness. Further, the paper also reports on the analysis of crystal structures on the surface layer with the use of GIXD (grazing incidence-angle X-ray diffraction). 22 refs., 15 figs.

  18. Achievement report on research and development in the Sunshine Project in fiscal 1979. Research hydrogen energy subsystems (Research on hydrogen fueled automobiles); 1979 nendo suiso energy subsystem no kenkyu seika hokokusho. Suiso jidosha system no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-03-01

    This paper describes research achievements in fiscal 1979 in research on hydrogen fueled automobiles as a research on hydrogen energy subsystems. The previous fiscal year has researched heat insulation methods to reduce evaporation loss from a hydrogen tank, prototype liquid level meters, prototype feed pumps (especially material selection for sliding parts) and a flow rate control method. Fiscal 1979 performed measurements of temperatures in different parts in the tank to elucidate how the heat makes invasion. Measurements were performed for the pump on suction valve behavior, internal pump compression force, liner temperatures, and leakage amount. The status of operation was identified and a high performance pump for use in very low temperatures was developed successfully. The pump has high delivery pressure, good durability, and capability of fine adjustment in the delivery quantity. This made the direct injection system for hydrogen fuel possible. Injection of hydrogen into an engine was possible by vaporizing liquefied hydrogen and supplying it as a low temperature gas used at 0 to -40 degrees C. The system has high efficiency. Fuel feed control was possible at the same level as in the existing automobiles. The prototype direct injection system can handle stably the load in actual cars. Material for the fuel tank is an important problem in terms of weight, whose solution is urged. (NEDO)

  19. Sentidos atribuídos ao trabalho pelos trabalhadores da indústria automobilística no contexto da produção flexível: um estudo comparativo Brasil e Portugal

    OpenAIRE

    Nepomuceno, Luciana Holanda

    2017-01-01

    Tese de Sociologoa Económica e das Organizações A tese discute o trabalho e as relações de trabalho em sua inscrição histórico-cultural,buscando compreender os sentidos conferidos a ele no contexto do capitalismo em sua fase flexível, partirda ótica de quem o realiza. Partiu-se do entendimento de que a indústria automobilística se caracteriza como pioneira na organização da produção industrial conduzindo a novas formas de divisão, organização e relações de trabalho. Assim, delimitou-se ...

  20. A sustentabilidade na indústria automobilística: vantagem competitiva ou um sonho distante? Sustainability in automotive industry: competitive advantage or a distant dream?

    Directory of Open Access Journals (Sweden)

    Almir Carvalho

    2013-03-01

    Full Text Available DOI: 10.5902/198346597741A introdução de aspectos relativos à sustentabilidade nos negócios faz parte do cenário empresarial nos mais diversos setores. Para a indústria automobilística, não é diferente; ao contrário, as discussões podem ser ainda mais intensas por se tratar de um setor de grande importância econômica e com impactos sociais e ambientais consideráveis. Este estudo tem por objetivo identificar como as questões relacionadas à sustentabilidade podem influenciar a decisão dos consumidores da indústria automobilística no Brasil, tendo como amostra consumidores residentes na cidade de São Paulo, a maior cidade do país. A pesquisa empírica, do tipo survey, compreendeu uma amostra de 184 consumidores da cidade de São Paulo, que responderam a um questionário enviado eletronicamente. Os resultados apontam para evidências ainda pouco expressivas em termos de influência de aspectos de sustentabilidade na percepção dos consumidores, em detrimento de fatores de ordem econômica, o que pode comprometer possíveis estratégias voltadas à sustentabilidade por parte das empresas do setor. The introduction of sustainability aspects in business has been a part of the current scenario in any industry. For automotive sector this is no different; on the contrary, discussions can be even more intense because it is a sector of great importance, regarding economic, social and environmental impacts. This study aims to identify how sustainability issues can influence Brazilian customers’ decision related to automotive industry, through a sample of consumers located in the city of São Paulo, the largest one in the country. The empirical research is of survey type and gathered a sample of 184 consumers, who answered a questionnaire sent electronically. The outcomes point out to the little significant scores in terms of the influence of sustainability aspects in the perception of consumers – rather than of economic factors