WorldWideScience

Sample records for astm american society

  1. 47 CFR 90.379 - ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard).

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard... Communications Service (dsrcs) § 90.379 ASTM E2213-03 DSRC Standard (ASTM-DSRC Standard). Roadside Units... incorporated by reference: American Society for Testing and Materials (ASTM) E2213-03, “Standard Specification...

  2. An Experimental Copyright Moratorium: Study of a Proposed Solution to the Copyright Photocopying Problem. Final Report to the American Society for Testing and Materials (ASTM).

    Science.gov (United States)

    Heilprin, Laurence B.

    The Committee to Investigate Copyright Problems (CICP), a non-profit organization dedicated to resolving the conflict known as the "copyright photocopying problem" was joined by the American Society for Testing and Materials (ASTM), a large national publisher of technical and scientific standards, in a plan to simulate a long-proposed…

  3. 46 CFR 163.003-3 - ASTM standard.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false ASTM standard. 163.003-3 Section 163.003-3 Shipping...: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Ladder § 163.003-3 ASTM standard. The following standard of the American Society for Testing and Materials (ASTM) is incorporated by reference into this subpart: ASTM D...

  4. The role of the American Society for Testing and Materials (ASTM) in providing standards to support reliability technology for nuclear power plants

    International Nuclear Information System (INIS)

    Steele, L.E.

    1978-01-01

    ASTM is an international society for managing the development of standards on characteristics and performance of materials, products, systems and services and the promotion of related knowledge. This paper provides on overview of ASTM, emphasizing its contribution to nuclear systems reliability. In so doing, the author, from his perspective as chairman of ASTM committee E 10 on ''Nuclear Applications and the Measurement of Radiation Effects and the Committee on Standards'', illustrates ASTM contributions to the understanding and control of radiation embrittlement of light-water reactor pressure vessels. Four major related taks are summarized and pertinent standards identified. These include: (1) surveillance practice (5 standards), (2) neutron dosimetry (8 standards), (3) specification for steels for nuclear service (7 standards) and (4) basic guidelines for thermal annealing to correct radiation embrittlement (1 standard). This illustration, a specific accomplishment using ASTM standards, is cited within the context of the broader nuclear-related activities of ASTM. (author)

  5. International cooperative effort to establish ASTM [American Society for Testing and Materials] standards for the measurement of radiation dose for food processing

    International Nuclear Information System (INIS)

    Farrar, H. IV.

    1987-01-01

    A task group has been formed within the American Society for Testing and Materials (ASTM) specifically to develop standards for measuring radiation dose for food processing. The task group, which has 78 members, including 16 from Europe, consists of a broad cross section of food industry, government, regulatory, manufacturing, and university interests. The group is working on seven standards; three specifically for food irradiation applications, and four for using specific dosimeter types for all radiation applications, including food processing. Together, this set of standards will specify acceptable methods of accomplishing the required irradiation treatment of food and other products, and will be available for adoption by regulatory agencies in food irradiation protocols. 1 tab

  6. Annual Book of ASTM Standards, Part 23: Water; Atmospheric Analysis.

    Science.gov (United States)

    American Society for Testing and Materials, Philadelphia, PA.

    Standards for water and atmospheric analysis are compiled in this segment, Part 23, of the American Society for Testing and Materials (ASTM) annual book of standards. It contains all current formally approved ASTM standard and tentative test methods, definitions, recommended practices, proposed methods, classifications, and specifications. One…

  7. ASTM Validates Air Pollution Test Methods

    Science.gov (United States)

    Chemical and Engineering News, 1973

    1973-01-01

    The American Society for Testing and Materials (ASTM) has validated six basic methods for measuring pollutants in ambient air as the first part of its Project Threshold. Aim of the project is to establish nationwide consistency in measuring pollutants; determining precision, accuracy and reproducibility of 35 standard measuring methods. (BL)

  8. Standard guide for high-resolution gamma-ray spectrometry of soil samples. ASTM standard

    International Nuclear Information System (INIS)

    1998-12-01

    This guide is under the jurisdiction of ASTM Committee C-26 on Nuclear Fuel Cycle and is the direct responsibility of Subcommittee C26.05 on Methods of Test. The current edition was approved on Jul. 10, 1998. It was published in December 1998. Copyright American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA, 19428, USA. This document is available from NTIS under license from ASTM

  9. HACCP: Integrating Science and Management through ASTM Standards

    Science.gov (United States)

    From a technical perspective, hazard analysis-critical control point (HACCP) evaluation may be considered a risk management tool suited to a wide range of applications. As one outcome of a symposium convened by American Society for Testing and Materials (ASTM) in August, 2005, th...

  10. Nuclear reactor pressure vessel surveillance capsule examinations. Application of American Society for Testing and Materials Standards

    International Nuclear Information System (INIS)

    Perrin, J.S.

    1978-01-01

    A series of pressure vessel surveillance capsules is installed in each commercial nuclear power plant in the United States. A capsule typically contains neutron dose meters, thermal monitors, tensile specimens, and Charpy V-notch impact specimens. In order to determine property changes of the pressure vessel resulting from irradiation, surveillance capsules are periodically removed during the life of a reactor and examined. There are numerous standards, regulations, and codes governing US pressure vessel surveillance capsule programmes. These are put out by the US Nuclear Regulatory Commission, the Boiler and Pressure Vessel Committee of the American Society of Mechanical Engineers, and the American Society for Testing and Materials (ASTM). A majority of the pertinent ASTM standards are under the jurisdiction of ASTM Committee E-10 on Nuclear Applications and Measurements of Radiation Effects. The standards, regulations, and codes pertaining to pressure vessel surveillance play an important role in ensuring reliability of the nuclear pressure vessels. ASTM E 185-73 is the Standard Recommended Practice for Surveillance Tests for Nuclear Reactors. This standard recommends procedures for both the irradiation and subsequent testing of surveillance capsules. ASTM E 185-73 references many additional specialized ASTM standards to be followed in specific areas of a surveillance capsule examination. A key element of surveillance capsule programmes is the Charpy V-notch impact test, used to define curves of fracture behaviour over a range of temperatures. The data from these tests are used to define the adjusted reference temperature used in determining pressure-temperature operating curves for a nuclear power plant. (author)

  11. ASTM reference radiologic digital image standards

    International Nuclear Information System (INIS)

    Wysnewski, R.; Wysnewski, D.

    1996-01-01

    ASTM Reference Radiographs have been essential in defining industry's material defect grade levels for many years. ASTM Reference Radiographs are used extensively as even the American Society for Metals Nondestructive Inspection and Quality Control Metals Handbook, Volume 11, eighth edition refers to ASTM Standard Reference Radiographs. The recently published E 1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds is a prime example of the on-going need for these references. To date, 14 Standard Reference Radiographs have been published to characterize material defects. Standard Reference Radiographs do not adequately address film-less radiologic methods. There are differences in mediums to content with. On a computer CRT defect indications appear differently when compared to indications viewed in a radiograph on a view box. Industry that uses non-film radiologic methods of inspection can be burdened with additional time and money developing internal standard reference radiologic images. These references may be deemed necessary for grading levels of product defects. Because there are no ASTM Standard Reference Radiologic data files for addressing this need in the industry, the authors of this paper suggested implementing a method for their creation under ASTM supervision. ASTM can assure continuity to those users making the transition from analog radiographic images to digital image data by swiftly addressing the requirements for reference digital image standards. The current status and possible future activities regarding a method to create digital data files is presented in this paper summary

  12. Summary: Update to ASTM guide E 1523 to charge control and charge referencing techniques in x-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Baer, D.R.

    2005-01-01

    An updated version of the American Society for Testing and Materials (ASTM) guide E 1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM [Annual Book of ASTM Standards Surface Analysis (American Society for Testing and Materials, West Conshohocken, PA, 2004), Vol. 03.06]. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to include new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997 [D. R. Baer and K. D. Bomben, J. Vac. Sci. Technol. A 16, 754 (1998)

  13. Developing the (ASTM) voluntary consensus standards required to help implement the National Energy Plan

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The recommended guide is the first American Society for Testing and Materials (ASTM) matrix in a family of such documents that combined, will help manage the development of the ASTM standards considered necessary to implement the current National Plan for Energy Research, Development, and Demonstration. It is expected that the guide will provide a framework for standards development to complement the nation's research and development in support of critical energy needs. The recommended guide identifies the energy-critical areas that are to be developed, the master ASTM recommended guide for developing the standards required to help the National Plan, the section in which each energy-critical area is covered, and the suggested ASTM lead committee responsible for each area (fossil, solar, geothermal, conservation, fusion, and fission reactor development). A comprehensive matrix to identify the areas of need for which ASTM standards will be required to help implement the National Energy Plan is also presented

  14. ASTM standards for fire debris analysis: a review.

    Science.gov (United States)

    Stauffer, Eric; Lentini, John J

    2003-03-12

    The American Society for Testing and Materials (ASTM) recently updated its standards E 1387 and E 1618 for the analysis of fire debris. The changes in the classification of ignitable liquids are presented in this review. Furthermore, a new standard on extraction of fire debris with solid phase microextraction (SPME) was released. Advantages and drawbacks of this technique are presented and discussed. Also, the standard on cleanup by acid stripping has not been reapproved. Fire debris analysts that use the standards should be aware of these changes.

  15. ASTM Committee D-7 : Wood : promoting safety and standardization for 100 years

    Science.gov (United States)

    David W. Green; Robert L. Ethington

    2004-01-01

    In October 2004, Committee D-7 on Wood of the American Society for Testing and Materials (ASTM) is celebrating 100 years of contributions to the safe and efficient use of wood as a building material. Born during a period of rapid social, economic, and technological change, the Committee faced controversial issues and the challenge of a changing forest resource. This...

  16. Analysis and evaluation of the Electronic Health Record standard in China: a comparison with the American national standard ASTM E 1384.

    Science.gov (United States)

    Xu, Wei; Guan, Zhiyu; Cao, Hongxin; Zhang, Haiyan; Lu, Min; Li, Tiejun

    2011-08-01

    To analyze and evaluate the newly issued Electronic Health Record (EHR) Architecture and Data Standard of China (Chinese EHR Standard) and identify areas of improvement for future revisions. We compared the Chinese EHR Standard with the standard of the American Society for Testing and Materials Standard Practice for Content and Structure of Electronic Health Records in the United States (ASTM E 1384 Standard). The comparison comprised two steps: (1) comparing the conformance of the two standards to the international standard: Health Informatics-Requirements for an Electronic Health Record Architecture (ISO/TS 18308), and showing how the architectures of the two standards satisfy or deviate from the ISO requirements and (2) comparing the detailed data structures between the two standards. Of the 124 requirement items in ISO/TS 18308, the Chinese EHR Standard and the ASTM E 1384 Standard conformed to 77 (62.1%) and 111 (89.5%), respectively. The Chinese EHR Standard conformed to 34 of 50 Structure requirements (68.0%), 22 of 24 Process requirements (91.7%), and 21 of 50 Other requirements (42.0%). The ASTM E 1384 Standard conformed to 49 of 50 Structure requirements (98.0%), 23 of 24 Process requirements (95.8%), and 39 of 40 Other requirements (78.0%). Further development of the Chinese EHR Standard should focus on supporting privacy and security mechanism, diverse data types, more generic and extensible lower level data structures, and relational attributes for data elements. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  17. American Society of Echocardiography

    Science.gov (United States)

    American Society of Echocardiography Join Ase Renew Member Portal Log In Membership Member Portal Log In Join ASE Renew Benefits Rates FASE – Fellow of the American Society of Echocardiography Member Referral Program FAQs Initiatives Advocacy Awards, Grants, ...

  18. American Cancer Society/American Society of Clinical Oncology Breast Cancer Survivorship Care Guideline.

    Science.gov (United States)

    Runowicz, Carolyn D; Leach, Corinne R; Henry, N Lynn; Henry, Karen S; Mackey, Heather T; Cowens-Alvarado, Rebecca L; Cannady, Rachel S; Pratt-Chapman, Mandi L; Edge, Stephen B; Jacobs, Linda A; Hurria, Arti; Marks, Lawrence B; LaMonte, Samuel J; Warner, Ellen; Lyman, Gary H; Ganz, Patricia A

    2016-02-20

    The purpose of the American Cancer Society/American Society of Clinical Oncology Breast Cancer Survivorship Care Guideline is to provide recommendations to assist primary care and other clinicians in the care of female adult survivors of breast cancer. A systematic review of the literature was conducted using PubMed through April 2015. A multidisciplinary expert workgroup with expertise in primary care, gynecology, surgical oncology, medical oncology, radiation oncology, and nursing was formed and tasked with drafting the Breast Cancer Survivorship Care Guideline. A total of 1,073 articles met inclusion criteria; and, after full text review, 237 were included as the evidence base. Patients should undergo regular surveillance for breast cancer recurrence, including evaluation with a cancer-related history and physical examination, and should be screened for new primary breast cancer. Data do not support performing routine laboratory tests or imaging tests in asymptomatic patients to evaluate for breast cancer recurrence. Primary care clinicians should counsel patients about the importance of maintaining a healthy lifestyle, monitor for post-treatment symptoms that can adversely affect quality of life, and monitor for adherence to endocrine therapy. Recommendations provided in this guideline are based on current evidence in the literature and expert consensus opinion. Most of the evidence is not sufficient to warrant a strong evidence-based recommendation. Recommendations on surveillance for breast cancer recurrence, screening for second primary cancers, assessment and management of physical and psychosocial long-term and late effects of breast cancer and its treatment, health promotion, and care coordination/practice implications are made.This guideline was developed through a collaboration between the American Cancer Society and the American Society of Clinical Oncology and has been published jointly by invitation and consent in both CA: A Cancer Journal for

  19. Systematic Approach to Design Tailor Made Fuel Blends That Meets ASTM Standards

    DEFF Research Database (Denmark)

    Intikhab, S.; Kalakul, Sawitree; H., Choudhury

    2015-01-01

    point, vapor pressure, and heat content were determined using analytical instruments according to their respective American Society for Testing and Materials (ASTM) standards. Most of the properties complied well with the industry standards. However, model gasoline had a comparatively low RVP....... On the other hand, model diesel had a significantly higher cloud point and pour point than what is recommended. This deviation will have an impact on the cold flow properties of the fuels. For both fuels, different additives along with their composition have also been determined using the same computational...

  20. The Black Man in American Society.

    Science.gov (United States)

    Framingham Public Schools, MA.

    GRADE OR AGES: Junior high school. SUBJECT MATTER: The black man in American society. ORGANIZATION AND PHYSICAL APPEARANCE: There are four major parts each with an overview. The four parts concern a) the African heritage of the black man, b) the American exploitation of the black man, c) the black man's contribution to American society, d) the…

  1. American Geriatrics Society

    Science.gov (United States)

    ... Learn More Social Media Facebook Twitter LinkedIn Instagram Social Media Bar Right Menu Annual Meeting Donate to our Foundation Contact Us American Geriatrics Society 40 Fulton St., 18th Floor New York, NY ...

  2. 76 FR 39852 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 41/2

    Science.gov (United States)

    2011-07-07

    ..., or equivalent, to the American Society for Testing and Materials (``ASTM'') A-53, ASTM A-106, ASTM A-333, ASTM A- 334, ASTM A-589, ASTM A-795, and the American Petroleum Institute (``API'') 5L... American Society of Mechanical Engineers (``ASME'') code stress levels. Alloy pipes made to ASTM A-335...

  3. 77 FR 13079 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Over 41/2

    Science.gov (United States)

    2012-03-05

    ... produced, or equivalent, to the American Society for Testing and Materials (``ASTM'') A-53, ASTM A-106, ASTM A-333, ASTM A- 334, ASTM A-589, ASTM A-795, and the American Petroleum Institute (``API'') 5L... American Society of Mechanical Engineers (``ASME'') code stress levels. Alloy pipes made to ASTM A-335...

  4. American Epilepsy Society

    Science.gov (United States)

    ... for the AES Annual Meeting. More info here . Epilepsy Currents American Epilepsy Society Journal Impact Factor More ... P450 enzyme overexpression during spontaneous recurrent seizures More Epilepsy Professional News AES Status Epilepticus guideline for treatment ...

  5. CCR+: Metadata Based Extended Personal Health Record Data Model Interoperable with the ASTM CCR Standard.

    Science.gov (United States)

    Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong; Kim, Ju Han

    2014-01-01

    Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models.

  6. Relation between the national handbook of recommended methods for water data acquisition and ASTM standards

    Science.gov (United States)

    Glysson, G. Douglas; Skinner, John V.

    1991-01-01

    In the late 1950's, intense demands for water and growing concerns about declines in the quality of water generated the need for more water-resources data. About thirty Federal agencies, hundreds of State, county and local agencies, and many private organizations had been collecting water data. However, because of differences in procedures and equipment, many of the data bases were incompatible. In 1964, as a step toward establishing more uniformity, the Bureau of the Budget (now the Office of Management and Budget, OMB) issued 'Circular A-67' which presented guidelines for collecting water data and also served as a catalyst for creating the Office of Water Data Coordination (OWDC) within the U.S. Geological Survey. This paper discusses past, present, and future aspects of the relation between methods in the National Handbook and standards published by ASTM (American Society for Testing and Materials) Committee D-19 on Water's Subcommittee D-19.07 on Sediment, Geomorphology, and Open Channel Flow. The discussion also covers historical aspects of standards - development work jointly conducted by OWDC and ASTM.

  7. ACC/AATS/AHA/ASE/ASNC/HRS/SCAI/SCCT/SCMR/STS 2017 Appropriate Use Criteria for Multimodality Imaging in Valvular Heart Disease : A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Heart Rhythm Society, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, Society for Cardiovascular Magnetic Resonance, and Society of Thoracic Surgeons.

    Science.gov (United States)

    Doherty, John U; Kort, Smadar; Mehran, Roxana; Schoenhagen, Paul; Soman, Prem

    2017-12-01

    This document is 1 of 2 companion appropriate use criteria (AUC) documents developed by the American College of Cardiology, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Heart Rhythm Society, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, Society for Cardiovascular Magnetic Resonance, and Society of Thoracic Surgeons. This document addresses the evaluation and use of multimodality imaging in the diagnosis and management of valvular heart disease, whereas the second, companion document addresses this topic with regard to structural heart disease. Although there is clinical overlap, the documents addressing valvular and structural heart disease are published separately, albeit with a common structure. The goal of the companion AUC documents is to provide a comprehensive resource for multimodality imaging in the context of valvular and structural heart disease, encompassing multiple imaging modalities.Using standardized methodology, the clinical scenarios (indications) were developed by a diverse writing group to represent patient presentations encountered in everyday practice and included common applications and anticipated uses. Where appropriate, the scenarios were developed on the basis of the most current American College of Cardiology/American Heart Association guidelines.A separate, independent rating panel scored the 92 clinical scenarios in this document on a scale of 1 to 9. Scores of 7 to 9 indicate that a modality is considered appropriate for the clinical scenario presented. Midrange scores of 4 to 6 indicate that a modality may be appropriate for the clinical scenario, and scores of 1 to 3 indicate that a modality is considered rarely appropriate for the clinical scenario.The primary objective of the AUC is to provide a framework for the assessment of these scenarios by practices that will

  8. American Vacuum Society: A multidisciplinary organization

    International Nuclear Information System (INIS)

    Beavis, L.C.

    1979-01-01

    This presentation is based upon that which was to be given by the Society President at the 25th National Symposium of the American Vacuum Society, 29 November 1978, in San Francisco, California. The talk to the Society by its President was an innovation of the 1979 Program Committee. The intention is that such a presentation be given each year at the awards acceptance plenary session along with those of the Welch and, when appropriate, Gaede--Langmuir awards. To be discussed are the recent highlights of Society activity, the direction the Society is taking, and an example of the multidisciplinary activities of Society members

  9. American Head and Neck Society

    Science.gov (United States)

    ... research and insights. Comments This field is for validation purposes and should be left unchanged. This iframe ... and Announcements Copyright ©2016 · American Head and Neck Society · Privacy and Return Policy Managed by BSC Management, ...

  10. Diversity in the American Society of Anesthesiologists Leadership.

    Science.gov (United States)

    Toledo, Paloma; Duce, Lorent; Adams, Jerome; Ross, Vernon H; Thompson, Kelli M; Wong, Cynthia A

    2017-05-01

    Women and minorities are underrepresented in US academic medicine. The Sullivan Commission on Diversity in the Healthcare Workforce emphasized the importance of diverse leadership for reducing health care disparities. The objective of this study was to evaluate the demographics of the American Society of Anesthesiologists leadership. We hypothesized that the percentage of women and underrepresented minorities is less than that of their respective proportions in the general physician workforce. An electronic survey was developed by the authors and mailed to 595 members of the American Society of Anesthesiologists leadership who had valid email addresses, including the members of the 2014 House of Delegates and state society leaders who were not the members of the House of Delegates. Univariate statistics were used to characterize survey responses and the probability distributions were estimated using the binomial distribution. A one-sample t test was used to compare the percentage of women and minorities in the survey pool to that of the corresponding percentages in the general physician workforce (38.0% women and 8.9% minorities), and the US population (51.0% women and 32.0% minorities). The survey response rate was 54%. A total of 21.1% (95% confidence interval: 16.4%-25.7%) of respondents were women and 6.0% (95% confidence interval: 3.3%-8.7%) were minorities. The proportion of women in the American Society of Anesthesiologist leadership was lower than the general medical workforce and the US population (P leadership of the American Society of Anesthesiologists. Efforts should be made to increase the diversity of the American Society of Anesthesiologists leadership with the goal of reducing overall anesthesia workforce disparities.

  11. ACC/AATS/AHA/ASE/ASNC/HRS/SCAI/SCCT/SCMR/STS 2017 Appropriate Use Criteria for Multimodality Imaging in Valvular Heart Disease: A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Heart Rhythm Society, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, Society for Cardiovascular Magnetic Resonance, and Society of Thoracic Surgeons.

    Science.gov (United States)

    Doherty, John U; Kort, Smadar; Mehran, Roxana; Schoenhagen, Paul; Soman, Prem; Dehmer, Greg J; Doherty, John U; Schoenhagen, Paul; Amin, Zahid; Bashore, Thomas M; Boyle, Andrew; Calnon, Dennis A; Carabello, Blase; Cerqueira, Manuel D; Conte, John; Desai, Milind; Edmundowicz, Daniel; Ferrari, Victor A; Ghoshhajra, Brian; Mehrotra, Praveen; Nazarian, Saman; Reece, T Brett; Tamarappoo, Balaji; Tzou, Wendy S; Wong, John B; Doherty, John U; Dehmer, Gregory J; Bailey, Steven R; Bhave, Nicole M; Brown, Alan S; Daugherty, Stacie L; Dean, Larry S; Desai, Milind Y; Duvernoy, Claire S; Gillam, Linda D; Hendel, Robert C; Kramer, Christopher M; Lindsay, Bruce D; Manning, Warren J; Mehrotra, Praveen; Patel, Manesh R; Sachdeva, Ritu; Wann, L Samuel; Winchester, David E; Wolk, Michael J; Allen, Joseph M

    2018-04-01

    This document is 1 of 2 companion appropriate use criteria (AUC) documents developed by the American College of Cardiology, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Heart Rhythm Society, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, Society for Cardiovascular Magnetic Resonance, and Society of Thoracic Surgeons. This document addresses the evaluation and use of multimodality imaging in the diagnosis and management of valvular heart disease, whereas the second, companion document addresses this topic with regard to structural heart disease. Although there is clinical overlap, the documents addressing valvular and structural heart disease are published separately, albeit with a common structure. The goal of the companion AUC documents is to provide a comprehensive resource for multimodality imaging in the context of valvular and structural heart disease, encompassing multiple imaging modalities. Using standardized methodology, the clinical scenarios (indications) were developed by a diverse writing group to represent patient presentations encountered in everyday practice and included common applications and anticipated uses. Where appropriate, the scenarios were developed on the basis of the most current American College of Cardiology/American Heart Association guidelines. A separate, independent rating panel scored the 92 clinical scenarios in this document on a scale of 1 to 9. Scores of 7 to 9 indicate that a modality is considered appropriate for the clinical scenario presented. Midrange scores of 4 to 6 indicate that a modality may be appropriate for the clinical scenario, and scores of 1 to 3 indicate that a modality is considered rarely appropriate for the clinical scenario. The primary objective of the AUC is to provide a framework for the assessment of these scenarios by practices that will

  12. American Society of Pediatric Hematology/Oncology

    Science.gov (United States)

    ... Learn More Explore career opportunities in pediatric hematology/oncology Visit the ASPHO Career Center. Learn More Join ... Privacy Policy » © The American Society of Pediatric Hematology/Oncology

  13. Sexism in modern American society

    Directory of Open Access Journals (Sweden)

    Ibraeva B. M.

    2016-12-01

    Full Text Available the authors of the article consider that modern life is still full of various stereotypes. One of the most controversial questions in this article is the issue of discrimination against women in contemporary American society, and it is hard to believe, because this country claims to be a main guarantor of the human rights and freedoms.

  14. An Official American Thoracic Society/American College of Chest Physicians Clinical Practice Guideline

    DEFF Research Database (Denmark)

    Girard, Timothy D; Alhazzani, Waleed; Kress, John P

    2017-01-01

    BACKGROUND: Interventions that lead to earlier liberation from mechanical ventilation can improve patient outcomes. This guideline, a collaborative effort between the American Thoracic Society (ATS) and the American College of Chest Physicians (CHEST), provides evidence-based recommendations to o...

  15. American Contact Dermatitis Society Core Allergen Series: 2017 Update.

    Science.gov (United States)

    Schalock, Peter C; Dunnick, Cory A; Nedorost, Susan; Brod, Bruce; Warshaw, Erin; Mowad, Christen

    The American Contact Dermatitis Society Core Allergen Series was introduced in 2012. After 4 years of use, changes in our recommended allergens are necessary. For the updated series, we have reordered the first 4 panels to approximately mirror the current TRUE Test and removed parthenolide, triclosan, glutaraldehyde, and jasmine. Polymyxin B, lavender, sodium benzoate, ethylhexylglycerin, and benzoic acid are new additions to the American Contact Dermatitis Society series.

  16. ASTM and ASME-BPE Standards--Complying with the Needs of the Pharmaceutical Industry.

    Science.gov (United States)

    Huitt, William M

    2011-01-01

    Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and standards and then modifying them in order to meet the more stringent requirements of the Food and Drug Administration (FDA). In 1997 the American Society of Mechanical Engineers (ASME) published the first Bioprocessing Equipment (BPE) Standard. Through harmonization efforts this relatively new standard has brought together, scrutinized, and refined industry accepted methodologies together with FDA compliance requirements, and has established an American National Standard that provides a comprehensive set of standards that are integral to the pharmaceutical industry. This article describes various American National Standards, including those developed and published by the American Society for Testing and Materials (ASTM), and how they apply to the pharmaceutical industry. It goes on to discuss the harmonization effort that takes place between the various standards developers in an attempt to prevent conflicts and omissions between the many standards. Also included are examples of tables and figures taken from the ASME-BPE Standard. These examples provide the reader with insight to the relevant content of the ASME-BPE Standard. Designing and building a pharmaceutical facility requires the owner, engineer of record, and constructor to be knowledgeable with regard to the industry codes and standards that apply to this effort. Up until 1997 there were no industry standards directed at the needs and requirements of the pharmaceutical industry. Prior to that time it was a patchwork effort at resourcing and adopting nonpharmaceutical-related codes and

  17. The Pan-American Federation of Neurological Societies (PAFNS): A New Regional Organization.

    Science.gov (United States)

    Medina, Marco T; Román, Gustavo C

    2016-07-15

    The Pan-American Federation of Neurological Societies (PAFNS) was created on 15 November 2011 during the 20th World Congress of Neurology in Marrakech by virtue of the "Declaration of Morocco" signed by the WFN Latin American delegates and ratified on 5 March 2012 by delegates attending the 13th Pan-American Congress of Neurology in La Paz, Bolivia. On 20 March 2013 delegates attending the 65th Annual Meeting of the American Academy of Neurology in San Diego, California, USA, gave formal approval to the PAFNS Constitution. The neurological societies from the following countries have approved and signed the constitution as founding members and active ordinary members: Argentina, Brazil, Bolivia, Chile, Colombia, Costa Rica, Cuba, Dominican Republic, Ecuador, El Salvador, Guatemala, Honduras, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Uruguay, and Venezuela. The Ibero-American Stroke Society (SIECV), the Commission on Latin American Affairs of the International League Against Epilepsy (ILAE) and the World Sleep Society have requested the status of Associate Members. The WFN and the American Academy of Neurology provided seed grants for the creation of the Pan-American Federation of Neurological Societies. PAFNS represents a major step for the improvement of regional neurological care, education and research. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. American Cancer Society: the world's wealthiest "nonprofit" institution.

    Science.gov (United States)

    Epstein, S S

    1999-01-01

    The American Cancer Society is fixated on damage control--diagnosis and treatment--and basic molecular biology, with indifference or even hostility to cancer prevention. This myopic mindset is compounded by interlocking conflicts of interest with the cancer drug, mammography, and other industries. The "nonprofit" status of the Society is in sharp conflict with its high overhead and expenses, excessive reserves of assets and contributions to political parties. All attempts to reform the Society over the past two decades have failed; a national economic boycott of the Society is long overdue.

  19. An official American thoracic society/European respiratory society statement: Key concepts and advances in pulmonary rehabilitation

    NARCIS (Netherlands)

    M.A. Spruit (Martijn); S.J. Singh (Sally); C. Garvey (Chris); R. Zu Wallack (Richard); L. Nici (Linda); C. Rochester (Carolyn); K. Hill (Kylie); A.E. Holland (Anne); S.C. Lareau (Suzanne); W.D.-C. Man (William); F. Pitta (Fabio); L. Sewell (Louise); J. Raskin (Jonathan); J. Bourbeau (Jean); R. Crouch (Rebecca); F.M.E. Franssen (Frits); R. Casaburi (Richard); J.H. Vercoulen (Jan); I. Vogiatzis (Ioannis); R.A.A.M. Gosselink (Rik); E.M. Clini (Enrico); T.W. Effing (Tanja); F. Maltais (François); J. van der Palen (Job); T. Troosters; D.J.A. Janssen (Daisy); E. Collins (Eileen); J. Garcia-Aymerich (Judith); D. Brooks (Dina); B.F. Fahy (Bonnie); M.A. Puhan (Milo); M. Hoogendoorn (Martine); R. Garrod (Rachel); A.M.W.J. Schols (Annemie); B. Carlin (Brian); R. Benzo (Roberto); P. Meek (Paula); M. Morgan (Mike); M.P.M.H. Rutten-van Mölken (Maureen); A.L. Ries (Andrew); B. Make (Barry); R.S. Goldstein (Roger); C.A. Dowson (Claire); J.L. Brozek (Jan); C.F. Donner (Claudio); E.F.M. Wouters (Emiel)

    2013-01-01

    textabstractBackground: Pulmonary rehabilitation is recognized as a core component of themanagement of individuals with chronic respiratory disease. Since the 2006 American Thoracic Society (ATS)/European Respiratory Society (ERS) Statement on Pulmonary Rehabilitation, there has been considerable

  20. The 2017 hormone therapy position statement of The North American Menopause Society.

    Science.gov (United States)

    2017-07-01

    The 2017 Hormone Therapy Position Statement of The North American Menopause Society (NAMS) updates the 2012 Hormone Therapy Position Statement of The North American Menopause Society and identifies future research needs. An Advisory Panel of clinicians and researchers expert in the field of women's health and menopause was recruited by NAMS to review the 2012 Position Statement, evaluate new literature, assess the evidence, and reach consensus on recommendations, using the level of evidence to identify the strength of recommendations and the quality of the evidence. The Panel's recommendations were reviewed and approved by the NAMS Board of Trustees.Hormone therapy (HT) remains the most effective treatment for vasomotor symptoms (VMS) and the genitourinary syndrome of menopause (GSM) and has been shown to prevent bone loss and fracture. The risks of HT differ depending on type, dose, duration of use, route of administration, timing of initiation, and whether a progestogen is used. Treatment should be individualized to identify the most appropriate HT type, dose, formulation, route of administration, and duration of use, using the best available evidence to maximize benefits and minimize risks, with periodic reevaluation of the benefits and risks of continuing or discontinuing HT.For women aged younger than 60 years or who are within 10 years of menopause onset and have no contraindications, the benefit-risk ratio is most favorable for treatment of bothersome VMS and for those at elevated risk for bone loss or fracture. For women who initiate HT more than 10 or 20 years from menopause onset or are aged 60 years or older, the benefit-risk ratio appears less favorable because of the greater absolute risks of coronary heart disease, stroke, venous thromboembolism, and dementia. Longer durations of therapy should be for documented indications such as persistent VMS or bone loss, with shared decision making and periodic reevaluation. For bothersome GSM symptoms not

  1. An Official American Thoracic Society/European Respiratory Society Statement: Key Concepts and Advances in Pulmonary Rehabilitation

    NARCIS (Netherlands)

    Spruit, Martijn A.; Singh, Sally J.; Garvey, Chris; ZuWallack, Richard; Nici, Linda; Rochester, Carolyn; Hill, Kylie; Holland, Anne E.; Lareau, Suzanne C.; Man, W.D.C.; Pitta, Fabio; Sewell, Louise; Raskin, Jonathan; Bourbeau, Jean; Crouch, Rebecca; Franssen, Frits M.E.; Casaburi, Richard; Vercoulen, Jan H.; Vogiatzit, Ioannis; Gosselink, Rik; Clini, Enrico M.; Effing, T.W.; Maltais, Francois; van der Palen, Jacobus Adrianus Maria; Troosters, Thierry; Janssen, Daisy J.A.; Collins, Eileen; Garcia-Aymerich, Judith; Brooks, Dina; Fahy, Bonnie F.; Puhan, Milo A.; Hoogendoorn, Martine; Garrod, Rachel; Schols, Annemie M.W.J.; Carlin, Brian; Benzo, Roberto; Meek, Paula; Morgan, Mike; Rutten-van Mölken, Maureen P.M.H.; Ries, Andrew L.; Make, Barry; Goldstein, Roger S.; Dowson, Claire A.; Brozek, Jan L.; Donner, Claudio F.; Wouters, Emiel F.M.

    2013-01-01

    Background: Pulmonary rehabilitation is recognized as a core component of the management of individuals with chronic respiratory disease. Since the 2006 American Thoracic Society (ATS)/European Respiratory Society (ERS) Statement on Pulmonary Rehabilitation, there has been considerable growth in our

  2. Maintaining Life-saving Testing for Patients With Infectious Diseases: Infectious Diseases Society of America, American Society for Microbiology, and Pan American Society for Clinical Virology Recommendations on the Regulation of Laboratory-developed Tests.

    Science.gov (United States)

    Caliendo, Angela M; Couturier, Marc R; Ginocchio, Christine C; Hanson, Kimberly E; Miller, Melissa B; Walker, Kimberly E; Frank, Gregory M

    2016-07-15

    In 2014, the US Food and Drug Administration (FDA) proposed to regulate laboratory-developed tests (LDTs)-diagnostics designed, manufactured, and used within a single laboratory. The Infectious Diseases Society of America, the American Society for Microbiology, and the Pan American Society for Clinical Virology recognize that the FDA is committed to protecting patients. However, our societies are concerned that the proposed regulations will limit access to testing and negatively impact infectious diseases (ID) LDTs. In this joint commentary, our societies discuss why LDTs are critical for ID patient care, hospital infection control, and public health responses. We also highlight how the FDA's proposed regulation of LDTs could impair patient access to life-saving tests and stifle innovation in ID diagnostics. Finally, our societies make specific recommendations for the FDA's consideration to reduce the burden of the proposed new rules on clinical laboratories and protect patients' access to state-of-the art, quality LDTs. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

  3. Validation of standard ASTM F2732 and comparison with ISO 11079 with respect to comfort temperature ratings for cold protective clothing.

    Science.gov (United States)

    Gao, Chuansi; Lin, Li-Yen; Halder, Amitava; Kuklane, Kalev; Holmér, Ingvar

    2015-01-01

    American standard ASTM F2732 estimates the lowest environmental temperature for thermal comfort for cold weather protective clothing. International standard ISO 11079 serves the same purpose but expresses cold stress in terms of required clothing insulation for a given cold climate. The objective of this study was to validate and compare the temperature ratings using human subject tests at two levels of metabolic rates (2 and 4 MET corresponding to 116.4 and 232.8 W/m(2)). Nine young and healthy male subjects participated in the cold exposure at 3.4 and -30.6 °C. The results showed that both standards predict similar temperature ratings for an intrinsic clothing insulation of 1.89 clo and for 2 MET activity. The predicted temperature rating for 2 MET activity is consistent with test subjects' thermophysiological responses, perceived thermal sensation and thermal comfort. For 4 MET activity, however, the whole body responses were on the cold side, particularly the responses of the extremities. ASTM F2732 is also limited due to its omission and simplification of three climatic variables (air velocity, radiant temperature and relative humidity) and exposure time in the cold which are of practical importance. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  4. American Nuclear Society 1994 student conference eastern region

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    This report contains abstracts from the 1994 American Nuclear Society Student Conference. The areas covered by these abstracts are: fusion and plasma physics; nuclear chemistry; radiation detection; reactor physics; thermal hydraulics; and corrosion science and waste issues.

  5. American Nuclear Society 1994 student conference eastern region

    International Nuclear Information System (INIS)

    1994-01-01

    This report contains abstracts from the 1994 American Nuclear Society Student Conference. The areas covered by these abstracts are: fusion and plasma physics; nuclear chemistry; radiation detection; reactor physics; thermal hydraulics; and corrosion science and waste issues

  6. 47 CFR 95.1509 - ASTM E2213-03 DSRC Standard.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false ASTM E2213-03 DSRC Standard. 95.1509 Section 95... ASTM E2213-03 DSRC Standard. On-Board Units operating in the 5850-5925 MHz band shall comply with the... Materials (ASTM) E2213-03, Standard Specification for Telecommunications and Information Exchange Between...

  7. Comparison of ASTM D613 and ASTM D6890

    Science.gov (United States)

    2016-04-01

    cetane values outside of the routine range of traditional CN testing by ASTM D613, this is an important advantage in fuel blending and disposition...Number testing. Particular emphasis was placed on evaluating fuels, and blends thereof, having cetane values outside of the normal range of the...interest covers both petroleum-based and synthetic-based, as well as blends thereof in order to improve the confidence in using DCN as a replacement

  8. Official Executive Summary of an American Thoracic Society/American College of Chest Physicians Clinical Practice Guideline

    DEFF Research Database (Denmark)

    Schmidt, Gregory A; Girard, Timothy D; Kress, John P

    2017-01-01

    BACKGROUND: This clinical practice guideline addresses six questions related to liberation from mechanical ventilation in critically ill adults. It is the result of a collaborative effort between the American Thoracic Society (ATS) and American College of Chest Physicians (CHEST). METHODS: A mult...

  9. North American Society for Pediatric Gastroenterology, Hepatology and Nutrition

    Science.gov (United States)

    North American Society for Pediatric Gastroenterology, Hepatology and Nutrition Skip to Navigation NASPGHAN Annual Meeting and Postgraduate ... transition well. Moreover, Doc4me provides information about medications, nutrition and living with IBD. Please help us promote ...

  10. the american colonization society's west african enterprise--colonial ...

    African Journals Online (AJOL)

    as the "American Society for Colonizing Free People of Color in the ... Significantly, findlay's brother-in-law was Elias Caldwell, Clerk of ... Representatives, and John Randolph of Virginia into the fledgling .... to Africa enterprise, one could easily despair for its success. The U.S . ..... Center, Maxwell Air Force Base, Alabama.

  11. Considerations on the ASTM standards 1789-04 and 1422-05 on the forensic examination of ink.

    Science.gov (United States)

    Neumann, Cedric; Margot, Pierre

    2010-09-01

    The ASTM standards on Writing Ink Identification (ASTM 1789-04) and on Writing Ink Comparison (ASTM 1422-05) are the most up-to-date guidelines that have been published on the forensic analysis of ink. The aim of these documents is to cover most aspects of the forensic analysis of ink evidence, from the analysis of ink samples, the comparison of the analytical profile of these samples (with the aim to differentiate them or not), through to the interpretation of the result of the examination of these samples in a forensic context. Significant evolutions in the technology available to forensic scientists, in the quality assurance requirements brought onto them, and in the understanding of frameworks to interpret forensic evidence have been made in recent years. This article reviews the two standards in the light of these evolutions and proposes some practical improvements in terms of the standardization of the analyses, the comparison of ink samples, and the interpretation of ink examination. Some of these suggestions have already been included in a DHS funded project aimed at creating a digital ink library for the United States Secret Service. © 2010 American Academy of Forensic Sciences.

  12. Democratization in the Gulf Monarchies and American Civil Society

    OpenAIRE

    Azam, M. Nazrul Islam and Muhammad; Azam, Muhammad

    2015-01-01

    The paper deals with the efforts made by American private sector and civil society actors after 2000 to popularize democratic values and norms in the six Gulf states, namely Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates. The study is focused on areas including politics, education, culture, media, human rights, and women empowerment. The paper also deals with approaches adopted, goals and objectives set and strategies devised and employed by the American NGOs regardi...

  13. Democratization in the Gulf Monarchies and American Civil Society

    OpenAIRE

    Azam, M. Nazrul Islam and Muhammad

    2010-01-01

    The paper deals with the efforts made by American private sector and civil society actors after 2000 to popularize democratic values and norms in the six Gulf states, namely Bahrain, Kuwait, Oman, Qatar, Saudi Arabia, and the United Arab Emirates. The study is focused on areas including politics, education, culture, media, human rights, and women empowerment. The paper also deals with approaches adopted, goals and objectives set and strategies devised and employed by the American NGOs regardi...

  14. ASTM E 1559 method for measuring material outgassing/deposition kinetics has applications to aerospace, electronics, and semiconductor industries

    Science.gov (United States)

    Garrett, J. W.; Glassford, A. P. M.; Steakley, J. M.

    1994-01-01

    The American Society for Testing and Materials has published a new standard test method for characterizing time and temperature-dependence of material outgassing kinetics and the deposition kinetics of outgassed species on surfaces at various temperatures. This new ASTM standard, E 1559(1), uses the quartz crystal microbalance (QCM) collection measurement approach. The test method was originally developed under a program sponsored by the United States Air Force Materials Laboratory (AFML) to create a standard test method for obtaining outgassing and deposition kinetics data for spacecraft materials. Standardization by ASTM recognizes that the method has applications beyond aerospace. In particular, the method will provide data of use to the electronics, semiconductor, and high vacuum industries. In ASTM E 1559 the material sample is held in vacuum in a temperature-controlled effusion cell, while its outgassing flux impinges on several QCM's which view the orifice of the effusion cell. Sample isothermal total mass loss (TML) is measured as a function of time from the mass collected on one of the QCM's which is cooled by liquid nitrogen, and the view factor from this QCM to the cell. The amount of outgassed volatile condensable material (VCM) on surfaces at higher temperatures is measured as a function of time during the isothermal outgassing test by controlling the temperatures of the remaining QCM's to selected values. The VCM on surfaces at temperatures in between those of the collector QCM's is determined at the end of the isothermal test by heating the QCM's at a controlled rate and measuring the mass loss from the end of the QCM's as a function of time and temperature. This reevaporation of the deposit collected on the QCM's is referred to as QCM thermogravimetric analysis. Isothermal outgassing and deposition rates can be determined by differentiating the isothermal TML and VCM data, respectively, while the evaporation rates of the species can be obtained as a

  15. Development of radiation shielding standards in the American Nuclear Society

    International Nuclear Information System (INIS)

    Trubey, D.K.

    1975-11-01

    The American Nuclear Society (ANS) is a standards-writing organization-member of the American National Standards Institute (ANSI). The ANS Standards Committee has a subcommittee denoted ANS-6, Shielding, whose charge is to establish standards in connection with radiation protection and shielding, to provide shielding information to other standards writing groups, and to prepare recommended sets of shielding data and test problems. This paper is a progress report of this subcommittee

  16. The focus of women in The American Fertility Society.

    Science.gov (United States)

    Haseltine, F P; Wentz, A C

    1984-09-01

    This article reports survey responses from 71 female members of the American Fertility Society during the Society's 1984 annual meeting. Survey questions concern 1) demographic factors such as rank, degree, title, address, and number of children, 2) field of specialization and research interests, and 3) what the Society can do for its meeting participants. The typical respondent is a physician living in the Eastern United States and employed as an assistant professor in an academic setting. In vitro fertilization is the greatest area of interest, followed by general practice, endocrine and male infertility, contraception, and fertility surgery. Survey responses show that women are interested in 1) networking, 2) increased visibility at professional meetings, 3) information about research possibilities and grants, 4) child care provision at Society meetings, and 5) more basic science and physiology oriented presentions in the program. In response to networking interests, the Society will make available information from the surveyed members. Since 16% of respondents have a PH.D., and 77% are employed in academics, the Society should consider more basic presentations. The need for day care indicates changes in Society membership. The Society plans to conduct similar surveys on a regular basis.

  17. American College of Radiology-American Brachytherapy Society practice parameter for electronically generated low-energy radiation sources.

    Science.gov (United States)

    Devlin, Phillip M; Gaspar, Laurie E; Buzurovic, Ivan; Demanes, D Jeffrey; Kasper, Michael E; Nag, Subir; Ouhib, Zoubir; Petit, Joshua H; Rosenthal, Seth A; Small, William; Wallner, Paul E; Hartford, Alan C

    This collaborative practice parameter technical standard has been created between the American College of Radiology and American Brachytherapy Society to guide the usage of electronically generated low energy radiation sources (ELSs). It refers to the use of electronic X-ray sources with peak voltages up to 120 kVp to deliver therapeutic radiation therapy. The parameter provides a guideline for utilizing ELS, including patient selection and consent, treatment planning, and delivery processes. The parameter reviews the published clinical data with regard to ELS results in skin, breast, and other cancers. This technical standard recommends appropriate qualifications of the involved personnel. The parameter reviews the technical issues relating to equipment specifications as well as patient and personnel safety. Regarding suggestions for educational programs with regard to this parameter,it is suggested that the training level for clinicians be equivalent to that for other radiation therapies. It also suggests that ELS must be done using the same standards of quality and safety as those in place for other forms of radiation therapy. Copyright © 2017 American Brachytherapy Society and American College of Radiology. Published by Elsevier Inc. All rights reserved.

  18. Brief overview of American Nuclear Society's research reactor standards

    International Nuclear Information System (INIS)

    Richards, Wade J.

    1984-01-01

    The American Nuclear Society (ANS) established the research reactor standards group in 1968. The standards group, known as ANS-15, was established for the purpose of developing, preparing, and maintaining standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training

  19. A history of the American Society for Clinical Investigation

    Science.gov (United States)

    Howell, Joel D.

    2009-01-01

    One hundred years ago, in 1909, the American Society for Clinical Investigation (ASCI) held its first annual meeting. The founding members based this new society on a revolutionary approach to research that emphasized newer physiological methods. In 1924 the ASCI started a new journal, the Journal of Clinical Investigation. The ASCI has also held an annual meeting almost every year. The society has long debated who could be a member, with discussions about whether members must be physicians, what sorts of research they could do, and the role of women within the society. The ASCI has also grappled with what else the society should do, especially whether it ought to take a stand on policy issues. ASCI history has reflected changing social, political, and economic contexts, including several wars, concerns about the ethics of biomedical research, massive increases in federal research funding, and an increasingly large and specialized medical environment. PMID:19348041

  20. American Nuclear Society exchanges of information

    International Nuclear Information System (INIS)

    Du Temple, O.J.

    2000-01-01

    Many are familiar with the technical journals and other publications that American Nuclear Society (ANS) members receive. However, there is a whole series of documents that is helpful to any nuclear society group for a modest fee or no fee. The author is referring to documents such as the ANS Bylaws and Rules, which have been made available to almost every existing nuclear society in the world. He remembers working with groups from Russia, Europe, China, Japan, Brazil, France, Germany, and others when they sought the experience of ANS in establishing a society. Financial planning guides are available for meetings, international conferences, technical expositions, and teacher workshops. Periodically, the ANS publishes position papers on the uses and handling of fuel materials and other publications helpful to public relations and teacher training courses. A few have had distributions in the hundreds of thousands, and one went as high as 750,000. Some of these have been translated in part into Spanish, French, Portuguese, and Japanese. Nuclear Standards are developed by a series of ANS committees consisting of about 1000 experts--the largest technical operation of ANS. Buyers guides and directories are very helpful in promoting the commerce in the nuclear industry. The Utility Directory covers utilities all over the globe. Radwaste Solutions, the new name for the former Radwaste Magazine, covers the efforts made by all sectors--private, government, and utility--to deal with radioactive waste. In the author's opinion, the one area in which all societies are weak is in interfacing with the International Atomic Energy Agency (IAEA). Since his retirement 9 yr ago, he has become much more aware of the IAEA as a news and technical information source. The ANS is trying to be more aware of what the IAEA is doing for everyone

  1. The American Nuclear Society's international student exchange program

    International Nuclear Information System (INIS)

    Bornstein, I.

    1988-01-01

    The American Nuclear Society's (ANS's) International Student Exchange Program sponsors bilateral exchanges of students form graduate schools in American universities with students from graduate schools in France, the Federal Republic of Germany (FRG), and Japan. The program, now in its 12th year, was initiated in response to an inquiry to Argonne National Laboratory (ANL) from the director of the Centre d'Etudes Nucleaires de Saclay proposing to send French nuclear engineering students to the United States for summer jobs. The laboratory was asked to accept two students to work on some nuclear technology activity and ANS was invited to send American students to France on an exchange basis. To date, 200 students have taken part in the program. It has been a maturing and enriching experience for them, and many strong and enduring friendships have been fostered among the participants, many of whom will become future leaders in their countries

  2. 76 FR 12370 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2011-03-07

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on February 4, 2011... seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written notifications.... Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities originating...

  3. Dilemmas of American Policy; Crucial Issues in Contemporary Society.

    Science.gov (United States)

    Cook, Samuel DuBois; And Others

    This volume contains four papers dealing with key social issues confronting American society; racial conflict; education (especially concerning national policies and goals); rationale for limited war for a nonmilitaristic nation; and the generation gap. Dr. Cook discusses black identity and white response and the problem of inculcating hope where…

  4. 78 FR 1884 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-01-09

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on December 12, 2012... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  5. 78 FR 35646 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-06-13

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on May 10, 2013, pursuant... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  6. 77 FR 34069 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-06-08

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on May 11, 2012, pursuant... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  7. 77 FR 61786 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-10-11

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on September 10, 2012... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  8. 78 FR 64248 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-10-28

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on September 16, 2013... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  9. 76 FR 34252 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; ASTM...

    Science.gov (United States)

    2011-06-13

    ... Production Act of 1993; ASTM International Standards Notice is hereby given that, on May 11, 2011, pursuant... seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written notifications.... Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities originating...

  10. 78 FR 14836 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2013-03-07

    ... Production Act of 1993--ASTM International Standards Notice is hereby given that, on February 11, 2013... seq. (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  11. Review of the American Physical Society light water reactor safety study

    International Nuclear Information System (INIS)

    Budnitz, R.J.

    1975-11-01

    The issue of light-water reactor (LWR) safety has been the subject of a part-time, year-long study sponsored by the American Physical Society and supported by the National Science Foundation and the former Atomic Energy Commission. The 1974-1975 study produced a Report by the Study Group to the Society. The Report's ''Summary of Conclusions and Major Recommendations'' section is presented

  12. Synopsis of History of American Society for Therapeutic Radiology and Oncology 1958-2008

    International Nuclear Information System (INIS)

    Montana, Gustavo S.

    2008-01-01

    Purpose: To provide a synopsis of the history of the association of radiation oncologists in the United States, currently known as the American Society for Therapeutic Radiology and Oncology (ASTRO), with the occasion of the 50th anniversary of the organization. Methods and Materials: The history of ASTRO, from its beginning as the American Club of Therapeutic Radiologists, is the subject of a book that is to be released with the occasion of the 50th Annual Meeting of the Society in 2008. This book was prepared by members of ASTRO's History Committee and History Working Subcommittee. The source material for the book was the archives of the Society and recorded interviews, conducted by members of the subcommittee, of members of the Society and of the past and present Society staff. The book was also based on previously published material. This article used the source material used for the Society anniversary book. Results: This synopsis of the history of the Society will provide a source of reference for anyone interested in the history of the Society from its foundation in 1958 to the present, 2008

  13. Comparison of British Thoracic Society and American Thoracic Society reintroduction guidelines for anti-tuberculous therapy induced liver injury

    International Nuclear Information System (INIS)

    Zuberi, B. F.; Alvi, H.; Zuberi, F. F.; Salahuddin, J.

    2014-01-01

    Objective: To compare the efficacy of British Thoracic Society and American Thoracic Society guidelines for re-introduction of anti-tuberculous therapy after drug-induced liver injury, and to assess the ease of administration of each guideline on a scale of 1-10. Methods: The randomised prospective interventional study was conducted at the Department of Medicine and Pulmonology, Dow University of Health Sciences, Karachi, from December 2011 to November 2013. Patients with anti-tuberculous therapy drug-induced liver injury were selected. Hepatotoxic anti-tuberculous therapy was stopped and modified anti-tuberculous therapy was started. Patients were followed weekly till clinical and biochemical parameters got stabilised. After stabilisation, the patients were randomised to one of the two groups to receive re-introduction of anti-tuberculous therapy under the guidelines of British Thoracic Society (Group I) or those of American Thoracic Society (Group II). Means of the groups were analysed by Student's t test and proportions were compared by chi-square test. Multivariate analysis was done for age, body mass index and serum albumin for recurrence of drug-induced liver injury after the re-introduction. P value <0.05 was taken as significant. Results: Of the total 325 patients, 163(50.15%) were in Group I, while 162(49.84%) were in Group II. The frequency of recurrence of drug-induced liver injury in Group I was 16 (9.8%) and in Group II it was 18 (11.1%). There was no statistically significant difference between the two groups (p<0.7). Age was positively related with drug-induced liver injury, while body mass index and serum albumin were negatively associated. Conclusion: There was no significant difference between the two major guidelines though the American Thoracic Society guideline was easier to follow. (author)

  14. Paperless or vanishing society

    Science.gov (United States)

    Turner Luke, Joy

    2002-06-01

    In the 1940s color photography became available and within a few years, extremely popular. As people switched from black and white photographs made with the old metallic silver process to the new color films, pictures taken to record their lives and families began a slow disappearing act. The various color processes, coupled with the substrates they were printed on, affected their longevity, but many color photographs taken from the late 1950s through the 1970s, and even into the 1980s, faded not only when exposed to the light, but also when stored in the dark. Henry Wilhelm's excellent book 'The Permanence and Care of Color Photographs' documents this history in detail. Today we are making another transition in the storage of pictures and information. There are questions about the longevity of different types of digital storage, and also of the images printed by various types of inkjet printers, or by laser printers using colored toners. Very expensive and very beautiful works of art produced on Iris printers are appearing in art exhibitions. Some of these are referred to as Giclee prints and are offered on excellent papers. Artists are told the prints will last a lifetime; and if by change they don't it is only necessary to make another print. Henry Wilhelm has begun to test and rate these images for lightfastness; however, his test method was developed for examining longevity in colored photographs. It is of interest to find out how these prints will hold up in the tests required for fine art materials. Thus far companies producing digital inks and printers have not invested the time and money necessary to develop an American Society for Testing and Materials (ASTM) standard method for evaluating the lightfastness of digital prints. However, it is possible to use ASTM D 5383, Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists, to pinpoint colors that will fade in a short time, even though the test is not as

  15. The American nuclear Society's educational outreach programme

    International Nuclear Information System (INIS)

    Zacha, N.J.

    1994-01-01

    The American Nuclear Society has an extensive program of public educational outreach in the area of nuclear science and technology. A teacher workshop program provides up to five days of hands-on experiments, lectures, field trips, and lesson plan development for grades 6-12 educators. Curriculum materials have been developed for students in grades kindergarten through grade 12. A textbook review effort provides reviews of existing textbooks as well as draft manuscripts and textbook proposals, to ensure that the information covered on nuclear science and technology is accurate and scientifically sound

  16. 46 CFR 119.440 - Independent fuel tanks.

    Science.gov (United States)

    2010-10-01

    .... The letters “AWG” stand for “American Wire Gage” (or Brown and Sharpe Gage) for nonferrous sheet... methods in American Society for Testing and Materials (ASTM) D635, “Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position,” and ASTM D2863, “Measuring the...

  17. 77 FR 56650 - Food and Drug Administration/American Glaucoma Society Workshop on the Validity, Reliability, and...

    Science.gov (United States)

    2012-09-13

    ...] Food and Drug Administration/American Glaucoma Society Workshop on the Validity, Reliability, and... entitled ``FDA/American Glaucoma Society (AGS) Workshop on the Validity, Reliability, and Usability of... research. The purpose of this public workshop is to provide a forum for discussing the validity...

  18. 77 FR 1085 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2012-01-09

    ... Production Act of 1993--ASTM International Notice is hereby given that, on December 5, 2011, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between...

  19. 75 FR 11196 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-03-10

    ... Production Act of 1993--ASTM International Notice is hereby given that, on February 16, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  20. 75 FR 65657 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-10-26

    ... Production Act of 1993--ASTM International Notice is hereby given that, on September 23, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  1. 76 FR 63658 - Notice Pursuant to the National Cooperative Research and Production Act of 1993; ASTM International

    Science.gov (United States)

    2011-10-13

    ... Production Act of 1993; ASTM International Notice is hereby given that, on August 31, 2011, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the..., ASTM has provided an updated list of current, ongoing ASTM standards activities originating between May...

  2. ASTM Standards for Reactor Dosimetry and Pressure Vessel Surveillance

    International Nuclear Information System (INIS)

    GRIFFIN, PATRICK J.

    1999-01-01

    The ASTM standards provide guidance and instruction on how to field and interpret reactor dosimetry. They provide a roadmap towards understanding the current ''state-of-the-art'' in reactor dosimetry, as reflected by the technical community. The consensus basis to the ASTM standards assures the user of an unbiased presentation of technical procedures and interpretations of the measurements. Some insight into the types of standards and the way in which they are organized can assist one in using them in an expeditious manner. Two example are presented to help orient new users to the breadth and interrelationship between the ASTM nuclear metrology standards. One example involves the testing of a new ''widget'' to verify the radiation hardness. The second example involves quantifying the radiation damage at a pressure vessel critical weld location through surveillance dosimetry and calculation

  3. 77 FR 14046 - Amended Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM...

    Science.gov (United States)

    2012-03-08

    ... Research and Production Act of 1993--ASTM International Standards Notice is hereby given that, on February..., 15 U.S.C. 4301 et seq. (``the Act''), ASTM International Standards (``ASTM'') has filed written... circumstances. Specifically, ASTM has provided an updated list of current, ongoing ASTM standards activities...

  4. American Pediatric Society 2013 presidential address: 125th anniversary of the American Pediatric Society--lessons from the past to guide the future.

    Science.gov (United States)

    Stoll, Barbara J

    2013-10-01

    This year is the 125th anniversary of the American Pediatric Society (APS), a time to reflect on the past 125 years of child health and child health research, a time to consider the health of America's children in a social and global context, and a time to consider the future. This paper is a combination of pediatric and APS history and personal story.

  5. Characterization of ASTM round-robin tungsten-powder samples

    International Nuclear Information System (INIS)

    Slettevold, C.A.; Biermann, A.H.

    1975-01-01

    The Lawrence Livermore Laboratory Particle Characterization Laboratory Group has participated in an industry-wide round-robin investigation on characterization of tungsten powder. sponsored by the ASTM Subcommittee on Refractory-Metal Powders (B-09.3). The analyses performed at the suggestion of the ASTM subcommittee included measurements of tap density, apparent density, true density, average particle size, and surface area. Determinations of particle-weight and size distributions were also performed and particle inspection conducted by microscopy. This report describes the equipment and procedures used and summarizes the results of these analyses. (9 tables, 17 fig) (U.S.)

  6. Kokes Awards for the 23rd North American Catalysis Society Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Gary [University of Kentucky Research Foundation, Lexington, KY (United States)

    2014-01-31

    The Tri-State Catalysis Society awarded 107 Kokes Travel Awards. The program was very successful and to date this was the most Kokes Travel Awards ever awarded at a North American Catalysis Society Meeting. It provided students who merited an award the opportunity to attend the meeting, present a paper in the form of either an oral presentation or a poster presentation, and to serve the North American Catalysis Society by participating in the organization of the meeting. Students worked very hard during the week of the meeting to make it a success. Financial support for the Kokes awards was provided by DOE, NSF, NACS, as well as the Tri-State Catalysis Society, the latter through fund raising activities, and other donations. AT the meeting, each student received over $1050 in kind to offset the costs of registration fees ($260), hotel accommodations ($295.7), transportation ($400 travel allowance), as well as T-shirts ($20), and banquet tickets ($95 provided by donations from society members). In addition, for the first time, students received certificates that were signed by the President of NACS, Professor Enrique Iglesia, and by the Kokes Awards Chair, Gary Jacobs (see last page). A list of meeting co-chairs (i.e., Uschi M. Graham, Umit S. Ozkan, and Madan Bhassin) and the honorary chair (Burtron H. Davis) was also included on the certificate, along with the name of the recipient. The awardees were chosen on a merit-based guideline which also included the requirements of having a presentation accepted at the meeting and being a student at a North American University. The Richard J. Kokes Student Travel Award Committee (Gary Jacobs, Rodney Andrews, and Peter Smirniotis) with help from the Organizing Committee were able to secure money from four sources as detailed in Table 1. As detailed by our Treasurer, Dr. Helge Toufar of Clariant, the total amount spent was $105,000.

  7. American Chemical Society. Division of Nuclear Chemistry and Technology

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The meeting of the 201st American Chemical Society Division of Nuclear Chemistry and Technology was comprised from a variety of topics in this field including: nuclear chemistry, nuclear physics, and nuclear techniques for environmental studies. Particular emphasis was given to fundamental research concerning nuclear structure (seven of the nineteen symposia) and studies of airborne particle monitoring and transport (five symposia). 105 papers were presented

  8. Position of the American Dietetic Association and American Society for Nutrition: obesity, reproduction, and pregnancy outcomes.

    Science.gov (United States)

    Siega-Riz, Anna Maria; King, Janet C

    2009-05-01

    Given the detrimental influence of maternal overweight and obesity on reproductive and pregnancy outcomes for the mother and child, it is the position of the American Dietetic Association and the American Society for Nutrition that all overweight and obese women of reproductive age should receive counseling on the roles of diet and physical activity in reproductive health prior to pregnancy,during pregnancy, and in the inter conceptional period, in order to ameliorate these adverse outcomes. The effect of maternal nutritional status prior to pregnancy on reproduction and pregnancy outcomes is of great public health importance. Obesity in the United States and worldwide has grown to epidemic proportions, with an estimated 33% of US women classified as obese. This position paper has two objectives: (a) to help nutrition professionals become aware of the risks and possible complications of overweight and obesity for fertility,the course of pregnancy, birth outcomes, and short- and long-term maternal and child health outcomes;and (b) related to the commitment to research by the American Dietetic Association and the American Society for Nutrition, to identify the gaps in research to improve our knowledge of the risks and complications associated with being overweight and obese before and during pregnancy.Only with an increased knowledge of these risks and complications can health care professionals develop effective strategies that can be implemented before and during pregnancy as well as during the inter conceptional period to ameliorate adverse outcomes.

  9. Spectrophotometric determination of the ASTM color of diesel oil

    Energy Technology Data Exchange (ETDEWEB)

    Douglas Willian Emanuel Alves Santana; Marcelle Prates Sepulveda; Paulo Jorge Sanches Barbeira

    2007-03-15

    One of the parameters analyzed to determine the quality of diesel oil is its ASTM color. Changes in color may be indicative of problems in the production process, contamination, degradation or the oxidation of diesel. The methodology recommended for determining the color of automotive diesel oil samples is the colorimetry according to standard ASTM D1500, in which a sample is introduced into a glass cell and the color of the sample is compared with an optical filter color scale. Although it is very simple, the manual method requires good visual acuity from the operator. This procedure becomes somewhat subjective in some cases since different operators can make distinct evaluations of the same sample. In this way, this work proposes the development of a spectrophotometric analysis methodology to eliminate the subjectiveness in the determination of ASTM color of diesel oil samples by using operator-independent parameters and making quality assay more accurate and precise. Short communication. 7 refs., 2 figs., 2 tabs.

  10. 75 FR 30440 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2010-06-01

    ... Production Act of 1993--ASTM International Notice is hereby given that, on May 6, 2010, pursuant to Section 6... Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the Attorney... recovery of antitrust plaintiffs to actual damages under specified circumstances. Specifically, ASTM has...

  11. ACC/AATS/AHA/ASE/ASNC/SCAI/SCCT/STS 2017 Appropriate Use Criteria for Coronary Revascularization in Patients With Stable Ischemic Heart Disease : A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, and Society of Thoracic Surgeons.

    Science.gov (United States)

    Patel, Manesh R; Calhoon, John H; Dehmer, Gregory J; Grantham, James Aaron; Maddox, Thomas M; Maron, David J; Smith, Peter K

    2017-10-01

    The American College of Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Thoracic Surgeons, and American Association for Thoracic Surgery, along with key specialty and subspecialty societies, have completed a 2-part revision of the appropriate use criteria (AUC) for coronary revascularization. In prior coronary revascularization AUC documents, indications for revascularization in acute coronary syndromes and stable ischemic heart disease (SIHD) were combined into 1 document. To address the expanding clinical indications for coronary revascularization, and to align the subject matter with the most current American College of Cardiology/American Heart Association guidelines, the new AUC for coronary artery revascularization were separated into 2 documents addressing SIHD and acute coronary syndromes individually. This document presents the AUC for SIHD.Clinical scenarios were developed to mimic patient presentations encountered in everyday practice. These scenarios included information on symptom status; risk level as assessed by noninvasive testing; coronary disease burden; and, in some scenarios, fractional flow reserve testing, presence or absence of diabetes, and SYNTAX score. This update provides a reassessment of clinical scenarios that the writing group felt were affected by significant changes in the medical literature or gaps from prior criteria. The methodology used in this update is similar to the initial document but employs the recent modifications in the methods for developing AUC, most notably, alterations in the nomenclature for appropriate use categorization.A separate, independent rating panel scored the clinical scenarios on a scale of 1 to 9. Scores of 7 to 9 indicate that revascularization is considered appropriate for the clinical scenario presented. Scores of 1 to 3 indicate that revascularization is considered rarely appropriate for the clinical scenario, whereas scores in the mid-range of 4 to 6 indicate that

  12. Method for Estimating Evaporative Potential (IM/CLO) from ASTM Standard Single Wind Velocity Measures

    Science.gov (United States)

    2016-08-10

    IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY MEASURES DISCLAIMER The opinions or assertions contained herein are the private views of the...USARIEM TECHNICAL REPORT T16-14 METHOD FOR ESTIMATING EVAPORATIVE POTENTIAL (IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY... ASTM STANDARD SINGLE WIND VELOCITY MEASURES Adam W. Potter Biophysics and Biomedical Modeling Division U.S. Army Research Institute of Environmental

  13. The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines-Anticoagulation During Cardiopulmonary Bypass.

    Science.gov (United States)

    Shore-Lesserson, Linda; Baker, Robert A; Ferraris, Victor A; Greilich, Philip E; Fitzgerald, David; Roman, Philip; Hammon, John W

    2018-02-01

    Despite more than a half century of "safe" cardiopulmonary bypass (CPB), the evidence base surrounding the conduct of anticoagulation therapy for CPB has not been organized into a succinct guideline. For this and other reasons, there is enormous practice variability relating to the use and dosing of heparin, monitoring heparin anticoagulation, reversal of anticoagulation, and the use of alternative anticoagulants. To address this and other gaps, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiologists, and the American Society of Extracorporeal Technology developed an Evidence Based Workgroup. This was a group of interdisciplinary professionals gathered to summarize the evidence and create practice recommendations for various aspects of CPB. To date, anticoagulation practices in CPB have not been standardized in accordance with the evidence base. This clinical practice guideline was written with the intent to fill the evidence gap and to establish best practices in anticoagulation therapy for CPB using the available evidence. To identify relevant evidence, a systematic review was outlined and literature searches were conducted in PubMed using standardized medical subject heading (MeSH) terms from the National Library of Medicine list of search terms. Search dates were inclusive of January 2000 to December 2015. The search yielded 833 abstracts, which were reviewed by two independent reviewers. Once accepted into the full manuscript review stage, two members of the writing group evaluated each of 286 full papers for inclusion eligibility into the guideline document. Ninety-six manuscripts were included in the final review. In addition, 17 manuscripts published before 2000 were included to provide method, context, or additional supporting evidence for the recommendations as these papers were considered sentinel publications. Members of the writing group wrote and developed recommendations based on review of the articles obtained and achieved

  14. ASTM standards associated with PWR and BWR power plant licensing, operation and surveillance

    International Nuclear Information System (INIS)

    McElroy, W.N.; McElroy, R.J.; Gold, R.; Lippincott, E.P.; Lowe, A.L. Jr.

    1994-01-01

    This paper considers ASTM Standards that are available, under revision, and are being considered in support of Pressurized Water Reactor (PWR) and Boiling Water Reactor (BWR) Nuclear Power Plant (NPP) licensing, regulation, operation, surveillance and life attainment. The current activities of ASTM Committee E10 and its Subcommittees E10.02 and current activities of ASTM Committee E10 and its Subcommittees E10.02 and E10.05 and their Task Groups (TG) are described. A very important aspect of these efforts is the preparation, revision, and balloting of standards identified in the ASTM E706 Standard on Master Matrix for Light Water Reactor (LWR) Pressure Vessel (PV) Surveillance Standards. The current version (E706-87) of the Master Matrix identifies 21 ASTM LWR physics-dosimetry-metallurgy standards for Reactor Pressure Vessel (RPV) and Support Structure (SS) surveillance programs, whereas, for the next revision 34 standards are identified. The need for national and international coordination of Standards Technology Development, Transfer and Training (STDTT) is considered in this and other Symposium papers that address specific standards related physics-dosimetry-metallurgy issues. 69 refs

  15. Use of Bayesian Methods to Analyze and Visualize Content Uniformity Capability Versus United States Pharmacopeia and ASTM Standards.

    Science.gov (United States)

    Hofer, Jeffrey D; Rauk, Adam P

    2017-02-01

    The purpose of this work was to develop a straightforward and robust approach to analyze and summarize the ability of content uniformity data to meet different criteria. A robust Bayesian statistical analysis methodology is presented which provides a concise and easily interpretable visual summary of the content uniformity analysis results. The visualization displays individual batch analysis results and shows whether there is high confidence that different content uniformity criteria could be met a high percentage of the time in the future. The 3 tests assessed are as follows: (a) United States Pharmacopeia Uniformity of Dosage Units , (b) a specific ASTM E2810 Sampling Plan 1 criterion to potentially be used for routine release testing, and (c) another specific ASTM E2810 Sampling Plan 2 criterion to potentially be used for process validation. The approach shown here could readily be used to create similar result summaries for other potential criteria. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  16. NREL Scientist Selected for Major Award by the American Chemical Society

    Science.gov (United States)

    contributions to the advancement of surface chemistry. The 160,000-member American Chemical Society selected Dr Chemistry. The award recognizes his many research, teaching, writing and administrative accomplishments adjunct professor of chemistry, physics and engineering at the University of Denver and the author or co

  17. The USCG/environment Canada/ASTM standards development program

    International Nuclear Information System (INIS)

    Whittaker, H.

    1992-01-01

    Environment Canada's Emergencies Engineering Division (EED) has been charged, as a result of the Public Review Panel on Tanker Safety and Marine Emergency Response report, with increased R ampersand D in marine oil spills. This activity will, of necessity, include development of standards and guidelines for the testing and/or usage of oil spill cleanup equipment. The United States Coast Guard (USCG) has been charged with implementing the provisions of the Oil Pollution Act of 1990 (OPA-90), as it pertains to marine transportation vessels and facilities. Among the provisions are requirements for vessel and facility owners and operators to develop comprehensive response plans that specifically match response resources to spill removal requirements. Meeting the response plan provisions of OPA-90 requires common standards for testing, selecting and assigning resources to anticipated response needs and objectively evaluating response plans for adequacy. In August of 1991, the USCG OPA-90 office approached ASTM to determine the feasibility of developing standards through that organizations procedures. Meetings were then held between the OPA-90 staff and members of the ASTM Committee F-20 on Hazardous Substances and Oil Spill Response. An agreement was reached to commence standards development in the areas of: Barriers, Skimmers, Treating Agents, Pumps, Beach Clean-up, Sorbents, Bioremediation, In-situ Burning, Temporary Storage Devices, Communications, Remote Sensing. It was recognized that ASTM and other organizational standards existed in several of these areas, but there were those where none were known to exist. Standards development was, therefore, expected to be a complicated and time-consuming process. Both the USCG OPA-90 and EC/EED offices required standards to be developed quickly, without subverting the ASTM process. Mechanical containment and recovery was considered to be the primary area of concern for both groups

  18. SOCIAL CLEAVAGES IN THE AMERICAN SOCIETY AS A FACTOR OF 2016 PRESIDENTIAL CAMPAIGN

    Directory of Open Access Journals (Sweden)

    P. S. Kanevskiy

    2017-01-01

    Full Text Available Current article is dedicated to analysis of social cleavages in the American elections and the ways they influenced on presidential election in 2016. Originally developed by S. Rokkan and S.M. Lipset, social cleavages became a classic theme for contemporary political sociology. However, despite the fact that the theory has been developing primarily by Americans, it has been rarely used to analyze electoral system in the USA. Traditionally it’s been aimed at European and developing countries where electoral fragmentation is seen more clearly. But recent changes in the American society and the political system demonstrate the emergence of social cleavages that had not been inherent before. The article shows how American electoral space transformed since the 1980s and how it became more fragmented under the influence of social, economic and ideological factors. Elections in 2016 became a watershed for social cleavages that accumulated through time and aggravated even more considering internal crises in the Democratic and more so in the Republican parties. Donald Trump’s victory is an impersonation of the American party system crisis and of the mainstream politicians’ inability to find proper explanation of the changing electorate. Author shows that American society today is polarized even more than many European countries while group identification determines vectors of political change.

  19. 75 FR 80730 - Francis Slakey on Behalf of the American Physical Society; Receipt of Petition for Rulemaking

    Science.gov (United States)

    2010-12-23

    ... [Docket No. PRM-70-9; NRC-2010-0372] Francis Slakey on Behalf of the American Physical Society; Receipt of... the NRC by Francis Slakey on behalf of the American Physical Society (APS). The petition was docketed... that over the next few years, the NRC would be reviewing license applications for new technologies, and...

  20. 40 CFR 721.4215 - Hexanedioic acid, diethenyl ester.

    Science.gov (United States)

    2010-07-01

    ... SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical... in accordance with the most current version of the American Society for Testing and Materials (ASTM... most current version of ASTM F1383 “Standard Test Method for Resistance of Protective Clothing...

  1. Filtration Effects Due to Bioassay Cage Design and Screen Type

    Science.gov (United States)

    2010-01-01

    Optical Nonimaging Light- Scattering Instruments (ASTM, 2003). Droplet sizing data included volume median diam (DV50), and the 10% and 90% diam (DV10 and...optical nonimaging light-scattering instru- ments. In: Annual book of ASTM standards. West Conshohocken, PA: American Society for Testing and Materials

  2. 40 CFR 264.1101 - Design and operating standards.

    Science.gov (United States)

    2010-07-01

    ... the American Concrete Institute (ACI) and the American Society of Testing Materials (ASTM) in judging... they are exposed; climatic conditions; and the stresses of daily operation, including the movement of...

  3. American Society of Maxillofacial Surgeons 2006 to 2016: Another Decade of Excellence in Education and Research.

    Science.gov (United States)

    Doumit, Gaby; Totonchi, Ali; Wexler, Andy; Gosain, Arun K

    2017-09-01

    Over the past 10 years, the American Society of Maxillofacial Surgeons (ASMS) has continued to advance to meet its mission of being the premier organization to represent maxillofacial and pediatric plastic surgery in the United States. These advances are focused on education of its members, to include the American Society of Maxillofacial Surgeons basic course, the preconference symposium, the annual meeting, two basic maxillofacial courses per year, advanced maxillofacial courses, a boot camp for craniofacial fellows, a cleft course, quarterly webinars, sponsored fellowships, a visiting professorship, and the ASMS journal. In addition, the ASMS has continued to advance as the premier national organization representing maxillofacial and pediatric plastic surgery in the United States, thereby positioning the organization as a primary advocate for these surgical specialties. Outreach of the ASMS has grown over the past decade and now includes representatives to the American Society of Plastic Surgeons/Plastic Surgery Foundation, the American Board of Plastic Surgeons, the American Medical Association, and most recently a seat as a governor with the American College of Surgeons. The ASMS has also initiated an annual Summer Leadership Seminar to explore topics of relevance in a changing health care environment. The present report outlines the major initiatives of the ASMS over the past 10 years.

  4. 76 FR 1459 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-ASTM International

    Science.gov (United States)

    2011-01-10

    ... Production Act of 1993-ASTM International Notice is hereby given that, on December 6, 2010, pursuant to.... (``the Act''), ASTM International (``ASTM'') has filed written notifications simultaneously with the...

  5. Fracture toughness of welded joints of ASTM A543 steel plate

    International Nuclear Information System (INIS)

    Susukida, H.; Uebayashi, T.; Yoshida, K.; Ando, Y.

    1977-01-01

    Fracture toughness and weldability tests have been performed on a high strength steel which is a modification of ASTM A543 Grade B Class 1 steel, with a view to using it for nuclear reactor containment vessels. The results showed that fracture toughness of welded joints of ASTM A543 modified high strength steel is superior and the steel is suitable for manufacturing the containment vessels

  6. 40 CFR 721.5310 - Neononanoic acid, ethenyl ester.

    Science.gov (United States)

    2010-07-01

    ... SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical... accordance with the most current version of the American Society for Testing and Materials (ASTM) F739... current version of ASTM F1383 “Standard Test Method for Resistance of Protective Clothing Materials to...

  7. 40 CFR 721.4250 - Hexanoic acid, 2-ethyl-, ethenyl ester.

    Science.gov (United States)

    2010-07-01

    ... SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical... accordance with the most current version of the American Society for Testing and Materials (ASTM) F739... current version of ASTM F1383 “Standard Test Method for Resistance of Protective Clothing Materials to...

  8. Analysis Techniques, Materials, and Methods for Treatment of Thermal Bridges in Building Envelopes

    Science.gov (United States)

    2013-08-01

    Proceedings of the 3rd ASTM Symposium on Insulation Materials: Testing and Applications, 3d vol. American Society for Testing and Materials (ASTM) STP ...when the temperature of the material is shifted across its melting point. Currently, there many different PCMs on the market with a wide range of

  9. Biopesticides: State of the Art and Future Opportunities by the American Chemical Society

    Science.gov (United States)

    This chapter from an American Chemical Society symposium reviews areas including how EPA views the benefits of biopesticides, related laws and legal requirements, biopesticide registration, and biopesticide data requirements.

  10. A Knowledge- Based Computer System for UO2 Characterization According to ASTM Requirements

    International Nuclear Information System (INIS)

    Afifi, Y.K.; El-Hakim, E.

    2000-01-01

    The uranium dioxde (UO 2 ) powder properties and the pellets fabrication processes determine the characteristics of the sintered UO 2 pellets. The powder properties include chemical and physical characteristics. The physical and chemical properties of UO 2 powder are normally checked to ensure consistency and reproducibility of the sintered UO 2 pellets. Powder characteristics are known to influence the subsequent manufacturing performance or the fuel properties. The aim of this paper is to provide the nuclear industry with a program dealing with the processes and the related requirements to determine the specifications of UO 2 powder according to the American Standards for Testing and Materials (ASTM). This program covers the physical and chemical characteristics of UO 2 powder. A group of logic flow charts dealing with the data and information available in the ASTM for each step in the characterization of UO 2 powder process and the technical assistance are constructed. These logic flow charts are collected to form a module of the software to qualify the UO 2 powder. The program contains 8 modules, each one deals with one object. This program saves time, is also considered as a collective schema for all the required UO 2 powder characterization and the related processes, and could be used as a training tool for less skilled personnel involved in UO 2 powder characterization laboratories

  11. 40 CFR 265.1101 - Design and operating standards.

    Science.gov (United States)

    2010-07-01

    ... industry such as the American Concrete Institute (ACI) and the American Society of Testing Materials (ASTM... wastes to which they are exposed; climatic conditions; and the stresses of daily operation, including the...

  12. An Official American Thoracic Society Research Statement

    DEFF Research Database (Denmark)

    Slatore, Christopher G; Horeweg, Nanda; Jett, James R

    2015-01-01

    BACKGROUND: Pulmonary nodules are frequently detected during diagnostic chest imaging and as a result of lung cancer screening. Current guidelines for their evaluation are largely based on low-quality evidence, and patients and clinicians could benefit from more research in this area. METHODS......: In this research statement from the American Thoracic Society, a multidisciplinary group of clinicians, researchers, and patient advocates reviewed available evidence for pulmonary nodule evaluation, characterized six focus areas to direct future research efforts, and identified fundamental gaps in knowledge...... demographic and nodule characteristics with patient-level outcomes. Methods to share data from registries are also necessary. CONCLUSIONS: This statement may help researchers to develop impactful and innovative research projects and enable funders to better judge research proposals. We hope...

  13. Manual phased arrays for weld inspections using North American codes

    International Nuclear Information System (INIS)

    Moles, Michael

    2008-01-01

    Phased arrays are primarily a method of generating and receiving ultrasound, not a new technology. In addition, the physics of ultrasound generated by phased arrays is identical to that from conventional monocrystals. Not surprisingly, all the major North American (and some European) codes accept phased arrays, either explicitly or implicitly. However, the technique and procedures needs to be proven, typically by a Performance Demonstration. The ASME (AmeicanSociety for Mechanical Engineers) Section V and API RP2X explicitly accept phased arrays. Three ASME code cases have been written specifically fo manual phased array: Code Cases 2541. 2557 and 2558. Over and above the general requirements of Article 4, these Code Cases require full waveform calibration. This is echoed in ASTM E-2491, a Standard Guide for setting up phased arrays. In addition. details such as focusing and reporting are addressed. The American Petroleum Institute QUTE procedure did not need any modifications to be compatible with manual phased arrays. The American Welding Society (AWS) Structural Welding Code D1.1 implicitly accepts phased arrays. New technologies such as phased arrays can be proven using Annex K. Nonetheless, a manual phased array unit using the standard AWS probe and displaying 45, 60 and 70degrees waveforms would be acceptable for D1.1 a s is . Overall, most major North American codes accept phased arrays, however, the technique and procedures must be proven, often using a Performance Demonstration. (author)

  14. American Society of Clinical Oncology/College of American Pathologists guideline recommendations for human epidermal growth factor receptor 2 testing in breast cancer

    NARCIS (Netherlands)

    Wolff, Antonio C.; Hammond, M. Elizabeth H.; Schwartz, Jared N.; Hagerty, Karen L.; Allred, D. Craig; Cote, Richard J.; Dowsett, Mitchell; Fitzgibbons, Patrick L.; Hanna, Wedad M.; Langer, Amy; McShane, Lisa M.; Paik, Soonmyung; Pegram, Mark D.; Perez, Edith A.; Press, Michael F.; Rhodes, Anthony; Sturgeon, Catharine; Taube, Sheila E.; Tubbs, Raymond; Vance, Gail H.; van de Vijver, Marc; Wheeler, Thomas M.; Hayes, Daniel F.

    2007-01-01

    PURPOSE: To develop a guideline to improve the accuracy of human epidermal growth factor receptor 2 (HER2) testing in invasive breast cancer and its utility as a predictive marker. METHODS: The American Society of Clinical Oncology and the College of American Pathologists convened an expert panel,

  15. American Society for Pain Management Nursing position statement: pain management at the end of life.

    Science.gov (United States)

    Reynolds, Janice; Drew, Debra; Dunwoody, Colleen

    2013-09-01

    Pain at the end of life continues to be of great concern as it may be unrecognized or untreated. While nurses have an ethical obligation to reduce suffering at the end of life, barriers remain regarding appropriate and adequate pain management at the end of life. This position statement from the American Society for Pain Management Nursing contains recommendations for nurses, prescribers, and institutions that would improve pain management for this vulnerable population. Copyright © 2013 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  16. Experimental and finite element analysis of fracture criterion in ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Birla Institute of Technology and Science, Pilani 333 031, India. 2 Research and ... The prevention of failure in stressed structural components currently ..... propagates. In the present work, a similar principle is extended to predict fracture limits using ... ASTM 1991 American Society for Testing and Materials (ASTM). E399-91 ...

  17. The American Society of Pediatric Hematology/Oncology workforce assessment: Part 1-Current state of the workforce.

    Science.gov (United States)

    Hord, Jeffrey; Shah, Mona; Badawy, Sherif M; Matthews, Dana; Hilden, Joanne; Wayne, Alan S; Salsberg, Edward; Leavey, Patrick S

    2018-02-01

    The American Society of Pediatric Hematology/Oncology (ASPHO) recognized recent changes in medical practice and the potential impact on pediatric hematology-oncology (PHO) workforce. ASPHO surveyed society members and PHO Division Directors between 2010 and 2016 and studied PHO workforce data collected by the American Board of Pediatrics and the American Medical Association to characterize the current state of the PHO workforce. The analysis of this information has led to a comprehensive description of PHO physicians, professional activities, and workplace. It is important to continue to collect data to identify changes in composition and needs of the PHO workforce. © 2017 Wiley Periodicals, Inc.

  18. 77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

    Science.gov (United States)

    2012-02-22

    ... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory... have accepted the revised ASTM F963-11 standard titled, Standard Consumer Safety Specifications for Toy Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will...

  19. Verification of the ASTM G-124 Purge Equation

    Science.gov (United States)

    Robbins, Katherine E.; Davis, Samuel Eddie

    2009-01-01

    ASTM G-124 seeks to evaluate combustion characteristics of metals in high-purity (greater than 99%) oxygen atmospheres. ASTM G-124 provides the following equation to determine the minimum number of purges required to reach this level of purity in a test chamber: n = -4/log10(Pa/Ph), where "n" is the total number of purge cycles required, Ph is the absolute pressure used for the purge on each cycle and Pa is the atmospheric pressure or the vent pressure. The origin of this equation is not known and has been the source of frequent questions as to its accuracy and reliability. This paper shows the derivation of the G-124 purge equation, and experimentally explores the equation to determine if it accurately predicts the number of cycles required.

  20. An official American Thoracic Society/European Respiratory Society statement: research questions in COPD

    Directory of Open Access Journals (Sweden)

    Bartolome R. Celli

    2015-06-01

    Full Text Available Chronic obstructive pulmonary disease (COPD is a leading cause of morbidity, mortality and resource use worldwide. The goal of this official American Thoracic Society (ATS/European Respiratory Society (ERS Research Statement is to describe evidence related to diagnosis, assessment, and management; identify gaps in knowledge; and make recommendations for future research. It is not intended to provide clinical practice recommendations on COPD diagnosis and management. Clinicians, researchers and patient advocates with expertise in COPD were invited to participate. A literature search of Medline was performed, and studies deemed relevant were selected. The search was not a systematic review of the evidence. Existing evidence was appraised and summarised, and then salient knowledge gaps were identified. Recommendations for research that addresses important gaps in the evidence in all areas of COPD were formulated via discussion and consensus. Great strides have been made in the diagnosis, assessment and management of COPD, as well as understanding its pathogenesis. Despite this, many important questions remain unanswered. This ATS/ERS research statement highlights the types of research that leading clinicians, researchers and patient advocates believe will have the greatest impact on patient-centred outcomes.

  1. ASTM test methods for composite characterization and evaluation

    Science.gov (United States)

    Masters, John E.

    1994-01-01

    A discussion of the American Society for Testing and Materials is given. Under the topic of composite materials characterization and evaluation, general industry practice and test methods for textile composites are presented.

  2. Spectrophotometer-Based Color Measurements

    Science.gov (United States)

    2017-10-24

    equipment. There are several American Society for Testing and Materials ( ASTM ) chapters covering the use of spectrometers for color measurements (refs. 3...Perkin Elmer software and procedures described in ASTM chapter E308 (ref. 3). All spectral data was stored on the computer. A summary of the color...similarity, or lack thereof, between two colors (ref. 5). In this report, the Euclidean distance metric, E, is used and recommended in ASTM D2244

  3. Tracking the workforce: the American Society of Clinical Oncology workforce information system.

    Science.gov (United States)

    Kirkwood, M Kelsey; Kosty, Michael P; Bajorin, Dean F; Bruinooge, Suanna S; Goldstein, Michael A

    2013-01-01

    In anticipation of oncologist workforce shortages projected as part of a 2007 study, the American Society of Clinical Oncology (ASCO) worked with a contractor to create a workforce information system (WIS) to assemble the latest available data on oncologist supply and cancer incidence and prevalence. ASCO plans to publish findings annually, reporting on new data and tracking trends over time. THE WIS REPORT IS COMPOSED OF THREE SECTIONS: supply, new entrants, and cancer incidence and prevalence. Tabulations of the number of oncologists in the United States are derived mainly from the American Medical Association Physician Masterfile. Information on fellows and residents in the oncology workforce pipeline come from published sources such as Journal of the American Medical Association. Incidence and prevalence estimates are published by the American Cancer Society and National Cancer Institute. The WIS reports a total of 13,084 oncologists working in the United States in 2011. Oncologists are defined as those physicians who designate hematology, hematology/oncology, or medical oncology as their specialty. The WIS compares the characteristics of these oncologists with those of all physicians and tracks emerging trends in the physician training pipeline. Observing characteristics of the oncologist workforce over time allows ASCO to identify, prioritize, and evaluate its workforce initiatives. Accessible figures and reports generated by the WIS can be used by ASCO and others in the oncology community to advocate for needed health care system and policy changes to help offset future workforce shortages.

  4. Tracking the Workforce: The American Society of Clinical Oncology Workforce Information System

    Science.gov (United States)

    Kirkwood, M. Kelsey; Kosty, Michael P.; Bajorin, Dean F.; Bruinooge, Suanna S.; Goldstein, Michael A.

    2013-01-01

    Purpose: In anticipation of oncologist workforce shortages projected as part of a 2007 study, the American Society of Clinical Oncology (ASCO) worked with a contractor to create a workforce information system (WIS) to assemble the latest available data on oncologist supply and cancer incidence and prevalence. ASCO plans to publish findings annually, reporting on new data and tracking trends over time. Methods: The WIS report is composed of three sections: supply, new entrants, and cancer incidence and prevalence. Tabulations of the number of oncologists in the United States are derived mainly from the American Medical Association Physician Masterfile. Information on fellows and residents in the oncology workforce pipeline come from published sources such as Journal of the American Medical Association. Incidence and prevalence estimates are published by the American Cancer Society and National Cancer Institute. Results: The WIS reports a total of 13,084 oncologists working in the United States in 2011. Oncologists are defined as those physicians who designate hematology, hematology/oncology, or medical oncology as their specialty. The WIS compares the characteristics of these oncologists with those of all physicians and tracks emerging trends in the physician training pipeline. Conclusion: Observing characteristics of the oncologist workforce over time allows ASCO to identify, prioritize, and evaluate its workforce initiatives. Accessible figures and reports generated by the WIS can be used by ASCO and others in the oncology community to advocate for needed health care system and policy changes to help offset future workforce shortages. PMID:23633965

  5. Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240

    Science.gov (United States)

    2015-11-05

    Undissolved Water in Aviation Turbine Fuels per ASTM D3240 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Joel Schmitigal... water ) in Aviation Turbine Fuels per ASTM D3240 15. SUBJECT TERMS fuel, JP-8, aviation fuel, contamination, free water , undissolved water , Aqua-Glo 16...Michigan 48397-5000 Evaluation of Instrumentation for Measuring Undissolved Water in Aviation Turbine Fuels per ASTM D3240 Joel Schmitigal Force

  6. Kokes Award for the 24th North American Catalysis Society Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Rioux, Robert M. [Pennsylvania State Univ., University Park, PA (United States)

    2016-05-02

    The objective of the Richard. J. Kokes Travel Award program is to encourage the participation of students in the biennial North American Catalysis Society (NACS) Meetings. The Kokes Award covers a significant portion of the transportation, lodging, and conference registration costs. Eligible students must be enrolled at a North American university and need to present a paper at the meeting. The Kokes awardee will be required to contribute some time to the organizing committee to assist in meeting operations and to be present at the meeting during the entire time. Similar to the 23rd Kokes Award program, undergraduate students are also eligible for the 24th Kokes Award program.

  7. Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter

    CERN Document Server

    Shock Waves in Condensed Matter

    1986-01-01

    The Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter was held in Spokane, Washington, July 22-25, 1985. Two hundred and fifty scientists and engineers representing thirteen countries registered at the conference. The countries represented included the United States of America, Australia, Canada, The People's Repub­ lic of China, France, India, Israel, Japan, Republic of China (Taiwan), United Kingdom, U. S. S. R, Switzerland and West Germany. One hundred and sixty-two technical papers, cov­ ering recent developments in shock wave and high pressure physics, were presented. All of the abstracts have been published in the September 1985 issue of the Bulletin of the American Physical Society. The topical conferences, held every two years since 1979, have become the principal forum for shock wave studies in condensed materials. Both formal and informal technical discussions regarding recent developments conveyed a sense of excitement. Consistent with the past conferences, th...

  8. ACC/AATS/AHA/ASE/ASNC/SCAI/SCCT/STS 2016 Appropriate Use Criteria for Coronary Revascularization in Patients With Acute Coronary Syndromes : A Report of the American College of Cardiology Appropriate Use Criteria Task Force, American Association for Thoracic Surgery, American Heart Association, American Society of Echocardiography, American Society of Nuclear Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Cardiovascular Computed Tomography, and the Society of Thoracic Surgeons.

    Science.gov (United States)

    Patel, Manesh R; Calhoon, John H; Dehmer, Gregory J; Grantham, James Aaron; Maddox, Thomas M; Maron, David J; Smith, Peter K

    2017-04-01

    The American College of Cardiology, Society for Cardiovascular Angiography and Interventions, Society of Thoracic Surgeons, and American Association for Thoracic Surgery, along with key specialty and subspecialty societies, have completed a 2-part revision of the appropriate use criteria (AUC) for coronary revascularization. In prior coronary revascularization AUC documents, indications for revascularization in acute coronary syndromes (ACS) and stable ischemic heart disease were combined into 1 document. To address the expanding clinical indications for coronary revascularization, and in an effort to align the subject matter with the most current American College of Cardiology/American Heart Association guidelines, the new AUC for coronary artery revascularization were separated into 2 documents addressing ACS and stable ischemic heart disease individually. This document presents the AUC for ACS. Clinical scenarios were developed to mimic patient presentations encountered in everyday practice and included information on symptom status, presence of clinical instability or ongoing ischemic symptoms, prior reperfusion therapy, risk level as assessed by noninvasive testing, fractional flow reserve testing, and coronary anatomy. This update provides a reassessment of clinical scenarios that the writing group felt to be affected by significant changes in the medical literature or gaps from prior criteria. The methodology used in this update is similar to the initial document but employs the recent modifications in the methods for developing AUC, most notably, alterations in the nomenclature for appropriate use categorization. A separate, independent rating panel scored the clinical scenarios on a scale of 1 to 9. Scores of 7 to 9 indicate that revascularization is considered appropriate for the clinical scenario presented. Scores of 1 to 3 indicate that revascularization is considered rarely appropriate for the clinical scenario, whereas scores in the mid-range (4 to 6

  9. Ethno-Religiosity in Orthodox Christianity: A Source of Solidarity & Multiculturalism in American Society

    Directory of Open Access Journals (Sweden)

    Chris Durante

    2015-03-01

    Full Text Available This study will analyze the processes of community organization implemented by Eastern Orthodox Christian ethno-religious groups, and Greek Orthodox Christian communities in particular, to establish themselves in American civil society. It will be argued that the symbiotic relationship formed between ethnicity and religion in this tradition, as well as the democratized grassroots mode of community organization that American civil society fosters, contributes to a strong sense of belonging amongst members of the ethno-religious Orthodox Christian congregations. In turn, this sense of belonging has produced a multi-layered mechanism for solidarity-building in these communities. It will then be suggested that in addition to contributing to America’s religious diversity, the preservation of ethno-linguistic heritage by the various Orthodox Christian churches simultaneously contributes to America’s poly-ethnicity and linguistic diversity as well. Last, it will be argued that the continued survival of ethno-religiosity in American Orthodoxy can either lead to further isolation amongst the separate ethnic congregations, or it can alternatively open avenues for the cultivation of a form of Orthodox Christian multiculturalism that supports neither homogeneity nor isolationism.

  10. Standardization work by ASTM and DIN concerning test methods for metallic materials - comparative assessment with regard for practice

    International Nuclear Information System (INIS)

    Gerischer, K.

    1986-01-01

    The article explains the significant role of ASTM and marks out basic elements of the specification system of ASTM standards. Usefulness in practice is taken as the main criterion for the subsequent comparison of ASTM or DIN activities and procedures, and results, for standardization in the field of test methods for metallic materials. The main differences are shown to exist with regard to tropicality of test standards, presentation of useful information and background knowledge, and importance attached to formal questions. ASTM standardization work is shown to be more up-to-date, contain more information, and to be less concerned with formal matters. A closer cooperation between ASTM and DIN is strongly recommended. (orig.) [de

  11. Defining refractory migraine: results of the RHSIS Survey of American Headache Society members.

    Science.gov (United States)

    Schulman, Elliott A; Peterlin, B Lee; Lake, Alvin E; Lipton, Richard B; Hanlon, Alexandra; Siegel, Sherry; Levin, Morris; Goadsby, Peter J; Markley, Herbert G

    2009-04-01

    To gauge consensus regarding a proposed definition for refractory migraine proposed by Refractory Headache Special Interest Section, and where its use would be most appropriate. Headache experts have long recognized that a subgroup of headache sufferers remains refractory to treatment. Although different groups have proposed criteria to define refractory migraine, the definition remains controversial. The Refractory Headache Special Interest Section of the American Headache Society developed a definition through a consensus process, assisted by a literature review and initial membership survey. A 12-item questionnaire was distributed at the American Headache Society meeting in 2007 during a platform session and at the Refractory Headache Special Interest Section symposium. The same questionnaire was subsequently sent to all American Headache Society members via e-mail. A total of 151 responses from AHS members form the basis of this report. The survey instrument was designed using Survey Monkey. Frequencies and percentages of the survey were used to describe survey responses. American Headache Society members agreed that a definition for refractory migraine is needed (91%) that it should be added to the International Classification of Headache Disorders-2 (86%), and that refractory forms of non-migraine headache disorders should be defined (87%). Responders believed a refractory migraine definition would be of greatest value in selecting patients for clinical drug trials. The current refractory migraine definition requires a diagnosis of migraine, interference with function or quality of life despite modification of lifestyle factors, and adequate trials of acute and preventive medicines with established efficacy. The proposed criteria for the refractory migraine definition require failing 2 preventive medications to meet the threshold for failure. Although 42% of respondents agreed with the working definition of refractory migraine, 43% favored increasing the

  12. Use of ASTM D5304 in assessing unstable diesel fuel

    Energy Technology Data Exchange (ETDEWEB)

    Turner, L.M.; Martin, C.J. [Defense Fuel Supply Center, Alexandria, VA (United States); Beal, E.J.; Hardy, D.R. [Naval Research Lab., Washington, DC (United States)

    1995-05-01

    The storage stability, or the length of time a fuel can be stored, is of great concern to diesel fuel users. This paper reports on the use of the new ASTM accelerated test for storage stability by oxygen overpressure (D5304) to predict future storage life span of 63,000,000 gallons of a diesel fuel for US Naval vessel use. This paper demonstrates the use of ASTM D5304 at storage times of 16, 40 and 96 hours to accurately determine the length of time that this large quantity of diesel fuel could be stored at ambient temperatures before the maximum allowable amount of particulate contamination was reached.

  13. Integration of Nanofluids into Commercial Antifreeze Concentrates with ASTM D15 Corrosion Testing

    Science.gov (United States)

    2013-05-01

    Lockwood1 1 Valvoline New Product Development Laboratory, Ashland Consumer Markets , Lexington, Kentucky. 2 Tank Automotive Research, Development...Development Laboratory,Ashland Consumer Markets ,P.O. Box 14000,Lexington,KY,40512 8. PERFORMING ORGANIZATION REPORT NUMBER ; #23826 9. SPONSORING...Technology, Performance, and Life for Light-Duty Applications, Engine Coolant Testing: Fourth Volume, ASTM STP 1335, R.E. Beale ed., ASTM, Philadelphia

  14. 76 FR 78614 - Welded ASTM A-312 Stainless Steel Pipe From South Korea and Taiwan: Continuation of Antidumping...

    Science.gov (United States)

    2011-12-19

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-580-810, A-583-815] Welded ASTM A-312... revocation of the antidumping duty orders on welded ASTM A-312 stainless steel pipe from South Korea (Korea... December 30, 1992, the Department published the antidumping duty orders on welded ASTM A-312 stainless...

  15. 18th Middle Atlantic Regional Meeting, American Chemical Society

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The Proceedings of the 18th Middle Atlantic Regional Meeting of the American Chemical Society held May 21-23, 1984, include information about the meeting, e.g. area map and list of exhibitors, and abstracts for most of the 397 papers. A few papers are only title listed. The papers are arranged into sections dealing with analytical chemistry, biochemistry, chemical education, environmental chemistry, fuel chemistry, history of chemistry, industrial and engineering chemistry, inorganic chemistry, photochemistry, physical chemistry, polymer chemistry, and polymeric materials. Sections are also included to highlight undergraduate research and papers by chemical technicians and younger chemists. Separate abstracts have been prepared for 36 papers

  16. Standardized Competencies for Parenteral Nutrition Prescribing: The American Society for Parenteral and Enteral Nutrition Model.

    Science.gov (United States)

    Guenter, Peggi; Boullata, Joseph I; Ayers, Phil; Gervasio, Jane; Malone, Ainsley; Raymond, Erica; Holcombe, Beverly; Kraft, Michael; Sacks, Gordon; Seres, David

    2015-08-01

    Parenteral nutrition (PN) provision is complex, as it is a high-alert medication and prone to a variety of potential errors. With changes in clinical practice models and recent federal rulings, the number of PN prescribers may be increasing. Safe prescribing of this therapy requires that competency for prescribers from all disciplines be demonstrated using a standardized process. A standardized model for PN prescribing competency is proposed based on a competency framework, the American Society for Parenteral and Enteral Nutrition (A.S.P.E.N.)-published interdisciplinary core competencies, safe practice recommendations, and clinical guidelines. This framework will guide institutions and agencies in developing and maintaining competency for safe PN prescription by their staff. © 2015 American Society for Parenteral and Enteral Nutrition.

  17. Sources of Confusion in the Determination of ASTM Repetitive Member Factors for the Allowable Properties of Wood Products

    Science.gov (United States)

    S. Verrill; D. Kretschmann

    2012-01-01

    It is generally accepted that there should be an upward repetitive member allowable property adjustment. ASTM D245 (2011c) and ASTM D1990 (2011b) specify a 1.15 factor for allowable bending stress. This factor is also listed in ASTM D6555 (2011a, Table 1). In this technical note, sources of confusion regarding appropriate repetitive member factors are identified. This...

  18. 76 FR 67673 - Welded ASTM A-312 Stainless Steel Pipe From South Korea and Taiwan: Final Results of Expedited...

    Science.gov (United States)

    2011-11-02

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-580-810, A-583-815] Welded ASTM A-312... the antidumping duty orders on welded ASTM A-312 stainless steel pipe from South Korea and Taiwan... duty orders on welded ASTM A-312 stainless steel pipe from South Korea and Taiwan pursuant to section...

  19. History of atomic layer deposition and its relationship with the American Vacuum Society

    NARCIS (Netherlands)

    Parsons, G.N.; Elam, J.W.; George, S.M.; Haukka, S.; Jeon, H.; Kessels, W.M.M.; Leskelä, M.; Poodt, P.; Ritala, M.; Rossnagel, S.M.

    2013-01-01

    This article explores the history of atomic layer deposition (ALD) and its relationship with the American Vacuum Society (AVS). The authors describe the origin and history of ALD science in the 1960s and 1970s. They also report on how the science and technology of ALD progressed through the 1990s

  20. An evaluation of efforts by nuclear power plants to use ASTM D3803-89

    International Nuclear Information System (INIS)

    Freeman, W.P.

    1995-01-01

    The number of nuclear power plants are now using ASTM D3803-89, open-quotes Standard Test Method for Nuclear-Grade Activated Carbonclose quotes for routine surveillance testing of adsorbents. In order to judge the impact of this change, we have gathered radioiodine removal test results from our data base on a system-by-system basis (i.e. control room, technical support center, and spent fuel pool) and compared test results obtained for the same kind of systems using the new and older test methods. Included in this comparison are systems with and without humidity control. Results are discussed from the standpoint of what to expect if a change to testing using ASTM D3803-89 is contemplated, especially regarding test results in light existing acceptance criteria. Additionally, the results are discussed from the standpoint of the sensitivity of the ASTM test method to detect when the performance of the carbon in air cleaning systems has been compromised (compared to the older methods). Finally, we offer some suggestions for how other plants might upgrade their carbon testing to incorporate testing to ASTM D3803-89

  1. An evaluation of efforts by nuclear power plants to use ASTM D3803-89

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, W.P.

    1995-02-01

    The number of nuclear power plants are now using ASTM D3803-89, {open_quotes}Standard Test Method for Nuclear-Grade Activated Carbon{close_quotes} for routine surveillance testing of adsorbents. In order to judge the impact of this change, we have gathered radioiodine removal test results from our data base on a system-by-system basis (i.e. control room, technical support center, and spent fuel pool) and compared test results obtained for the same kind of systems using the new and older test methods. Included in this comparison are systems with and without humidity control. Results are discussed from the standpoint of what to expect if a change to testing using ASTM D3803-89 is contemplated, especially regarding test results in light existing acceptance criteria. Additionally, the results are discussed from the standpoint of the sensitivity of the ASTM test method to detect when the performance of the carbon in air cleaning systems has been compromised (compared to the older methods). Finally, we offer some suggestions for how other plants might upgrade their carbon testing to incorporate testing to ASTM D3803-89.

  2. 40 CFR 265.443 - Design and operating requirements.

    Science.gov (United States)

    2010-07-01

    ... standards established by professional organizations generally recognized by industry such as the American Concrete Institute (ACI) and the American Society of Testing Materials (ASTM) in judging the structural..., climatic conditions, the stress of installation, and the stress of daily operations, e.g., variable and...

  3. 40 CFR 264.573 - Design and operating requirements.

    Science.gov (United States)

    2010-07-01

    ... professional organizations generally recognized by the industry such as the American Concrete Institute (ACI) or the American Society of Testing and Materials (ASTM) in judging the structural integrity..., climatic conditions, the stress of daily operations, e.g., variable and moving loads such as vehicle...

  4. An Automated Safe-to-Mate (ASTM) Tester

    Science.gov (United States)

    Nguyen, Phuc; Scott, Michelle; Leung, Alan; Lin, Michael; Johnson, Thomas

    2013-01-01

    Safe-to-mate testing is a common hardware safety practice where impedance measurements are made on unpowered hardware to verify isolation, continuity, or impedance between pins of an interface connector. A computer-based instrumentation solution has been developed to resolve issues. The ASTM is connected to the circuit under test, and can then quickly, safely, and reliably safe-to-mate the entire connector, or even multiple connectors, at the same time.

  5. Light-water reactor pressure vessel surveillance standards

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The master matrix standard describes a series of standard practices, guides, and methods for the prediction of neutron-induced changes in light-water reactor (LWR) pressure vessel steels throughout a pressure vessel's service life. Some of these are existing American Society for Testing and Materials (ASTM) standards, some are ASTM standards that have been modified, and some are newly proposed ASTM standards. The current (1) scope, (2) areas of application, (3) interrelationships, and (4) status and time table of development, improvement, validation, and calibration for a series of 16 ASTM standards are defined. The standard also includes a discussion of LWR pressure vessel surveillance - justification, requirements, and status of work

  6. Full-text publication of abstracts presented at meetings of a Latin American scientific society.

    Science.gov (United States)

    Dicembrino, Manuela; Anderson, Mariana; Vely, Ana Gabriela; Ossorio, María Fabiana; Ferrero, Fernando

    2014-12-01

    To estimate the proportion of abstracts presented at meetings of the Latin American Society for Pediatric Research that are fully-published, to describe the reasons for not publishing papers, and to assess the impact of funding on the publication rate. Abstracts presented at meetings held between 2005 and 2009 were included. Authors were contacted and invited to take a survey on the publication of their work or the reasons not to do it. Information was collected on 232 (71.4%) of the 325 abstracts presented. Of these, 58.6% were fully-published (136/232). Funded studies (40.0%) had more chances of publication (OR: 2.2; 95% CI: 1.2-3.9). "Lack of time" was the most common reason for failure to publish (35/96). 58.6% of abstracts presented at meetings of the Latin American Society for Pediatric Research, were published as full-text articles; lack of time was the most common reason for failure to publish. Funded research had more chances of being published.

  7. Shared Decision Making in ICUs: An American College of Critical Care Medicine and American Thoracic Society Policy Statement.

    Science.gov (United States)

    Kon, Alexander A; Davidson, Judy E; Morrison, Wynne; Danis, Marion; White, Douglas B

    2016-01-01

    Shared decision making is endorsed by critical care organizations; however, there remains confusion about what shared decision making is, when it should be used, and approaches to promote partnerships in treatment decisions. The purpose of this statement is to define shared decision making, recommend when shared decision making should be used, identify the range of ethically acceptable decision-making models, and present important communication skills. The American College of Critical Care Medicine and American Thoracic Society Ethics Committees reviewed empirical research and normative analyses published in peer-reviewed journals to generate recommendations. Recommendations approved by consensus of the full Ethics Committees of American College of Critical Care Medicine and American Thoracic Society were included in the statement. Six recommendations were endorsed: 1) DEFINITION: Shared decision making is a collaborative process that allows patients, or their surrogates, and clinicians to make healthcare decisions together, taking into account the best scientific evidence available, as well as the patient's values, goals, and preferences. 2) Clinicians should engage in a shared decision making process to define overall goals of care (including decisions regarding limiting or withdrawing life-prolonging interventions) and when making major treatment decisions that may be affected by personal values, goals, and preferences. 3) Clinicians should use as their "default" approach a shared decision making process that includes three main elements: information exchange, deliberation, and making a treatment decision. 4) A wide range of decision-making approaches are ethically supportable, including patient- or surrogate-directed and clinician-directed models. Clinicians should tailor the decision-making process based on the preferences of the patient or surrogate. 5) Clinicians should be trained in communication skills. 6) Research is needed to evaluate decision

  8. Evaluation of ozonated water using ASTM E1174 for standardized testing of handwash formulations for healthcare personnel.

    Science.gov (United States)

    Nakamura, K; Saito, K; Kashiwazaki, J; Aoyagi, T; Arai, K; Hara, Y; Kobari, S; Mori, H; Ohashi, K; Takano, Y; Kaku, M; Kanemitsu, K

    2018-02-13

    Removal of bacteria by handwashing with ozonated water was evaluated using the ASTM E1174 standard test method. Thirty healthy volunteers were assigned randomly to three groups: ozonated water, antimicrobial soap and water, and non-antimicrobial soap and water. A 3 log 10  cfu reduction was achieved by washing hands with ozonated water or antimicrobial soap and water. However, ozonated water was not significantly superior to non-antimicrobial soap and water. Ozonated water may remove bacteria from the hands to at least a similar extent as that by non-antimicrobial soap and water in the absence of visible dirt or body fluid contamination. Copyright © 2018 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  9. 30 CFR 250.901 - What industry standards must your platform meet?

    Science.gov (United States)

    2010-07-01

    ...) American Petroleum Institute (API) Bulletin 2INT-DG, Interim Guidance for Design of Offshore Structures for... (RP) 2A-WSD, RP for Planning, Designing, and Constructing Fixed Offshore Platforms—Working Stress..., (incorporated by reference as specified in § 250.198); (15) American Society for Testing and Materials (ASTM...

  10. Determination of MIL-H-6083 Hydraulic Fluid In-Service Use Limits for Self-Propelled Artillery

    Science.gov (United States)

    1991-09-01

    determined using the American Society for Testing and Materials (ASTM) D1744 Karl Fischer Reagent method . The specification limit is 0.05% (500 pans per...cazefully controlled. TOTAL ACID NUMBER The acid number was determined by the ASTM D664 potentiometric titration test method . Unfortunately, data were...fluid condition t results with AOAP tent date was found. The Navy Patch Kit method for particle contamination meamrement was evaluated as a possible

  11. American Society of Clinical Oncology/College Of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer.

    NARCIS (Netherlands)

    Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

    2010-01-01

    PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

  12. American Society of Clinical Oncology/College of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer.

    NARCIS (Netherlands)

    Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

    2010-01-01

    PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

  13. Electronic nicotine delivery systems: a policy statement from the American Association for Cancer Research and the American Society of Clinical Oncology.

    Science.gov (United States)

    Brandon, Thomas H; Goniewicz, Maciej L; Hanna, Nasser H; Hatsukami, Dorothy K; Herbst, Roy S; Hobin, Jennifer A; Ostroff, Jamie S; Shields, Peter G; Toll, Benjamin A; Tyne, Courtney A; Viswanath, Kasisomayajula; Warren, Graham W

    2015-02-01

    Combustible tobacco use remains the number one preventable cause of disease, disability, and death in the United States. Electronic nicotine delivery systems (ENDS), which include e-cigarettes, are devices capable of delivering nicotine in an aerosolized form. ENDS use by both adults and youth has increased rapidly, and some have advocated these products could serve as harm-reduction devices and smoking cessation aids. ENDS may be beneficial if they reduce smoking rates or prevent or reduce the known adverse health effects of smoking. However, ENDS may also be harmful, particularly to youth, if they increase the likelihood that nonsmokers or formers smokers will use combustible tobacco products or if they discourage smokers from quitting. The American Association for Cancer Research (AACR) and the American Society of Clinical Oncology (ASCO) recognize the potential ENDS have to alter patterns of tobacco use and affect the public's health; however, definitive data are lacking. AACR and ASCO recommend additional research on these devices, including assessing the health impacts of ENDS, understanding patterns of ENDS use, and determining what role ENDS have in cessation. Key policy recommendations include supporting federal, state, and local regulation of ENDS; requiring manufacturers to register with the FDA and report all product ingredients, requiring childproof caps on ENDS liquids, and including warning labels on products and their advertisements; prohibiting youth-oriented marketing and sales; prohibiting child-friendly ENDS flavors; and prohibiting ENDS use in places where cigarette smoking is prohibited. ©2015 American Association for Cancer Research and American Society of Clinical Oncology.

  14. Combating Wear of ASTM A36 Steel by Surface Modification Using Thermally Sprayed Cermet Coatings

    Directory of Open Access Journals (Sweden)

    Vineet Shibe

    2016-01-01

    Full Text Available Thermal spray coatings can be applied economically on machine parts to enhance their requisite surface properties like wear, corrosion, erosion resistance, and so forth. Detonation gun (D-Gun thermal spray coatings can be applied on the surface of carbon steels to improve their wear resistance. In the present study, alloy powder cermet coatings WC-12% Co and Cr3C2-25% NiCr have been deposited on ASTM A36 steel with D-Gun thermal spray technique. Sliding wear behavior of uncoated ASTM A36 steel and D-Gun sprayed WC-12% Co and Cr3C2-25% NiCr coatings on base material is observed on a Pin-On-Disc Wear Tester. Sliding wear performance of WC-12% Co coating is found to be better than the Cr3C2-25% NiCr coating. Wear performance of both these cermet coatings is found to be better than uncoated ASTM A36 steel. Thermally sprayed WC-12% Co and Cr3C2-25% NiCr cermet coatings using D-Gun thermal spray technique is found to be very useful in improving the sliding wear resistance of ASTM A36 steel.

  15. PROPOSED ASTM METHOD FOR THE DETERMINATION OF ASBESTOS IN AIR BY TEM AND INFORMATION ON INTERFERING FIBERS

    Science.gov (United States)

    The draft of the ASTM Test Method for air entitled: "Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)" (ASTM Z7077Z) is an adaptation of the International Standard, ISO 10312. It is currently...

  16. Impact of heat treatment on HSS cutting tool (ASTM A600) and its behaviour during machining of mild steel (ASTM A36)

    Science.gov (United States)

    Afolalu, S. A.; Abioye, O. P.; Salawu, E. Y.; Okokpujie, I. P.; Abioye, A. A.; Omotosho, O. A.; Ajayi., O. O.

    2018-04-01

    Carburization is one the best heat treatment that responded well to hardening with Palm Kernel Shell giving the best hardness value. This work studied the influence of carburization on HSStool(ASTM A600) and its behaviour during machining of mild steel (ASTM A36). Composition of the samples (12 pieces of 180 × 12 × 12 mm) HSS tools were checked using UV-VIS spectrometer and the tools were carburized with PKS at holding temperatures and time of 800, 850, 900, 950 °C and 60,90 120 minutes using muffle furnance. The micro structural analysis, surface and core hardnessof the treated samples gave better results than the untreated samples when checked withsoft driven and optical microscope. It wasalso observed that increase in the feed rate and depth for length of cut of 50 mm significantly reduces the wear progression and thereby gave best machining time at maximum carburizing temperature and time(950 °C / 120 minutes) when it was used to cut mild steelon the lathe machine.

  17. JST Thesaurus Headwords and Synonyms: ASTM [MeCab user dictionary for science technology term[Archive

    Lifescience Database Archive (English)

    Full Text Available MeCab user dictionary for science technology term ASTM 名詞 一般 * * * * 米国材料試験協会 ベイコクザ...イリョウシケンキョウカイ ベイコクザイリョーシケンキョーカイ Thesaurus2015 200906091611619997 C IA02 UNKNOWN_1 ASTM

  18. Ductile fracture toughness of heavy section pressure vessel steel plate. A specimen-size study of ASTM A 533 steels

    International Nuclear Information System (INIS)

    Williams, J.A.

    1979-09-01

    The ductile fracture toughness, J/sub Ic/, of ASTM A 533, Grade B, Class 1 and ASTM A 533, heat treated to simulate irradiation, was determined for 10- to 100-mm thick compact specimens. The toughness at maximum specimen load was also measured to determine the conservatism of J/sub Ic/. The toughness of ASTM A 533, Grade B, Class 1 steel was 349 kJ/m 2 and at the equivalent upper shelf temperature, the heat treated material exhibited 87 kJ/m 2 . The maximum load fracture toughness was found to be linearly proportional to specimen size, and only specimens which failed to meet ASTM size criteria exhibited maximum load toughness less than J/sub Ic/

  19. Recognition of American Physiological Society Members Whose Research Publications Had a Significant Impact on the Discipline of Physiology

    Science.gov (United States)

    Tipton, Charles M.

    2013-01-01

    Society members whose research publication during the past 125 yr had an important impact on the discipline of physiology were featured at the American Physiological Society (APS)'s 125th Anniversary symposium. The daunting and challenging task of identifying and selecting significant publications was assumed by the Steering Committee of the…

  20. Respiratory health equality in the United States. The American thoracic society perspective.

    Science.gov (United States)

    Celedón, Juan C; Roman, Jesse; Schraufnagel, Dean E; Thomas, Alvin; Samet, Jonathan

    2014-05-01

    Because the frequency of major risk factors for respiratory diseases (e.g., tobacco use) differs across demographic groups (defined by socioeconomic status, race/ethnicity, sexual orientation, health care access, occupation, or other characteristics), health disparities are commonly encountered in pediatric and adult pulmonary, critical care, and sleep medicine. As part of its policy on respiratory health disparities, the American Thoracic Society (ATS) Executive Committee created a Health Equality Subcommittee of the Health Policy Committee, with an initial mandate of defining respiratory health equality and, as a subsequent task, providing recommendations to the ATS leadership as to how our society may help attain such equality in the United States. After receiving input from the ATS assemblies and committees, the subcommittee developed this document on respiratory health equality. This document defines respiratory health disparities and respiratory health equality, and expands on a recent ATS and European Respiratory Society policy statement on disparities in respiratory health. Attainment of respiratory health equality requires the ending of respiratory health disparities, which can be achieved only through multidisciplinary efforts to eliminate detrimental environmental exposures while promoting a healthy lifestyle, implementing all components of high-quality health care (prevention, screening, diagnosis, and treatment), and conducting research that will lead to better prevention and management of respiratory diseases for everyone. The ATS recognizes that such efforts must include all stakeholders: members of society at large, governmental and nongovernmental organizations, and other professional societies. The ATS urges all of its members and those of sister societies to work to achieve this laudable goal.

  1. ASTM International Workshop on Standards & Measurements for Tissue Engineering Scaffolds

    Science.gov (United States)

    Simon, Carl G.; Yaszemski, Michael J.; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A.

    2016-01-01

    The “Workshop on Standards & Measurements for Tissue Engineering Scaffolds” was held on May 21, 2013 in Indianapolis, IN and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active “guide” documents for educational purposes, but that few standard “test methods” or “practices” have been published. Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition and drug release from scaffolds. Discussions also highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Finally, dialogue emphasized the needs to promote the use of standards in scaffold fabrication, characterization, and commercialization and to assess the use and impact of standards in the TEMPs community. Many scaffold standard needs have been identified and focus should now turn to generating these standards to support the use of scaffolds in TEMPs. PMID:25220952

  2. The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines-Anticoagulation During Cardiopulmonary Bypass.

    Science.gov (United States)

    Shore-Lesserson, Linda; Baker, Robert A; Ferraris, Victor A; Greilich, Philip E; Fitzgerald, David; Roman, Philip; Hammon, John W

    2018-02-01

    Despite more than a half century of "safe" cardiopulmonary bypass (CPB), the evidence base surrounding the conduct of anticoagulation therapy for CPB has not been organized into a succinct guideline. For this and other reasons, there is enormous practice variability relating to the use and dosing of heparin, monitoring heparin anticoagulation, reversal of anticoagulation, and the use of alternative anticoagulants. To address this and other gaps, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiologists, and the American Society of Extracorporeal Technology developed an Evidence Based Workgroup. This was a group of interdisciplinary professionals gathered to summarize the evidence and create practice recommendations for various aspects of CPB. To date, anticoagulation practices in CPB have not been standardized in accordance with the evidence base. This clinical practice guideline was written with the intent to fill the evidence gap and to establish best practices in anticoagulation therapy for CPB using the available evidence. To identify relevant evidence, a systematic review was outlined and literature searches were conducted in PubMed using standardized medical subject heading (MeSH) terms from the National Library of Medicine list of search terms. Search dates were inclusive of January 2000 to December 2015. The search yielded 833 abstracts, which were reviewed by two independent reviewers. Once accepted into the full manuscript review stage, two members of the writing group evaluated each of 286 full papers for inclusion eligibility into the guideline document. Ninety-six manuscripts were included in the final review. In addition, 17 manuscripts published before 2000 were included to provide method, context, or additional supporting evidence for the recommendations as these papers were considered sentinel publications. Members of the writing group wrote and developed recommendations based on review of the articles obtained and achieved

  3. American Society of Clinical Oncology position statement on obesity and cancer.

    Science.gov (United States)

    Ligibel, Jennifer A; Alfano, Catherine M; Courneya, Kerry S; Demark-Wahnefried, Wendy; Burger, Robert A; Chlebowski, Rowan T; Fabian, Carol J; Gucalp, Ayca; Hershman, Dawn L; Hudson, Melissa M; Jones, Lee W; Kakarala, Madhuri; Ness, Kirsten K; Merrill, Janette K; Wollins, Dana S; Hudis, Clifford A

    2014-11-01

    Rates of obesity have increased significantly over the last three decades in the United States and globally. In addition to contributing to heart disease and diabetes, obesity is a major unrecognized risk factor for cancer. Obesity is associated with worsened prognosis after cancer diagnosis and also negatively affects the delivery of systemic therapy, contributes to morbidity of cancer treatment, and may raise the risk of second malignancies and comorbidities. Research shows that the time after a cancer diagnosis can serve as a teachable moment to motivate individuals to adopt risk-reducing behaviors. For this reason, the oncology care team--the providers with whom a patient has the closest relationships in the critical period after a cancer diagnosis--is in a unique position to help patients lose weight and make other healthy lifestyle changes. The American Society of Clinical Oncology is committed to reducing the impact of obesity on cancer and has established a multipronged initiative to accomplish this goal by 1) increasing education and awareness of the evidence linking obesity and cancer; 2) providing tools and resources to help oncology providers address obesity with their patients; 3) building and fostering a robust research agenda to better understand the pathophysiology of energy balance alterations, evaluate the impact of behavior change on cancer outcomes, and determine the best methods to help cancer survivors make effective and useful changes in lifestyle behaviors; and 4) advocating for policy and systems change to address societal factors contributing to obesity and improve access to weight management services for patients with cancer. © 2014 by American Society of Clinical Oncology.

  4. Isothermal Bainite Processing of ASTM A723 Components

    Science.gov (United States)

    1993-09-01

    4 List of Illustrations 1. Photograph of typical cylinders used in the present study ................................. 7 2. CCT diagram for... CCT ) diagram obtained by thermal and magnetic analyses for the high nickel (-3 percent) ASTM A723 steel. The bainite knee for the 2 percent nickel...block. Also shown is the slope giving the average cooling rate in the critical region of the CCT diagram . This average rate happens to approximately

  5. Symposium for Alfred Wolf's 75th birthday at American Chemical Society meeting

    International Nuclear Information System (INIS)

    1998-01-01

    This report contains abstracts from the symposium presented by the Division of Nuclear Chemistry and Technology of the American Chemical Society. Sessions covered the following topics: Therapeutic radionuclides--Making the right choice; Aspects of nuclear science; Nuclear structure with large gamma-ray detector arrays and their auxiliary devices; Thirty years of research in nuclear dynamics--From fission to the quark-gluon plasma; Chelated metal ions for diagnosis and therapy; Radiochemistry--Basic and applied; and Applications of small accelerators in science and industry

  6. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee Report on Electronic Brachytherapy

    International Nuclear Information System (INIS)

    Park, Catherine C.; Yom, Sue S.; Podgorsak, Matthew B.; Harris, Eleanor; Price, Robert A.; Bevan, Alison; Pouliot, Jean; Konski, Andre A.; Wallner, Paul E.

    2010-01-01

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.

  7. Promoting Employee Health Through an American Cancer Society Program, The CEOs Challenge, Washington State, 2013-2015.

    Science.gov (United States)

    Harris, Jeffrey R; Parrish, Amanda T; Kohn, Marlana; Hammerback, Kristen; McMillan, Becca; Hannon, Peggy A

    2015-12-17

    Evidence-based practices in the workplace can increase levels of healthy eating, cancer screening, physical activity, and tobacco cessation but are underused, even in large workplaces. This report summarizes an evaluation of the first year of The CEOs Challenge, a program developed by the American Cancer Society to promote implementation and maintenance of health-promoting, evidence-based workplace practices by large companies. Use of 17 evidence-based practices by 17 companies in the Washington State Chapter of the American Cancer Society's CEOs Against Cancer network was assessed via survey and scored from 0 to 100. Companies received a written report of their baseline performance, followed by at least quarterly consultations with American Cancer Society staff members trained to assist in implementation of these practices. Follow-up performance was measured at 1 year. At baseline, implementation scores were 54.8 for cancer screening, 46.5 for healthy eating, 59.8 for physical activity, and 68.2 for tobacco cessation. At follow-up, scores increased by 19.6 for cancer screening, 19.4 for healthy eating, 16.0 for physical activity, and 9.4 points for tobacco cessation. The CEOs Challenge is a promising approach to chronic disease prevention via the workplace. It brings together one of the nation's largest health-promoting voluntary agencies with the nation's largest employers to promote evidence-based practices targeted at the most common causes of disease and death. The program increased the adoption of these practices and was well-accepted.

  8. Gerald J. Marks, M.D., FACS (1925-), founder of the Society of American Gastrointestinal Endoscopic Surgeons (SAGES).

    Science.gov (United States)

    Yeo, Theresa P; Cowan, Scott W; Yeo, Charles J

    2018-03-01

    This historical vignette describes the professional career of Gerald J. Marks, the founder of the Society of American Gastrointestinal and Endoscopic Surgeons and the International Federation of Societies of Endoscopic Surgeons. Dr. Marks is also the founding Associate Editor of Surgical Endoscopy, which celebrated its 30th anniversary in 2017. Dr. Marks is a renowned colorectal surgeon, an accomplished watercolor artist, and a fascinating personality.

  9. American Society for Pain Management Nursing Position Statement: Pain Management in Patients with Substance Use Disorders

    OpenAIRE

    Oliver, June; Coggins, Candace; Compton, Peggy; Hagan, Susan; Matteliano, Deborah; Stanton, Marsha; St. Marie, Barbara; Strobbe, Stephen; Turner, Helen N.

    2012-01-01

    The American Society for Pain Management Nursing (ASPMN) has updated its position statement on managing pain in patients with substance use disorders. This position statement is endorsed by the International Nurses Society on Addictions (IntNSA) and includes clinical practice recommendations based on current evidence. It is the position of ASPMN and IntNSA that every patient with pain, including those with substance use disorders, has the right to be treated with dignity, respect, and high qu...

  10. Early Women Sociologist and the American Sociological Society: the Patterns of Exclusion and Participation

    Directory of Open Access Journals (Sweden)

    Mary Jo Deegan

    2012-12-01

    Full Text Available American sociology owes a significant debt to early women professionals. Although discriminatedagainst as full colleagues, they nonetheless contributed to sociological thoughtand participated in professional activities. Evidence of both the barriers and opportunitiesaffecting these early female leaders is found in the records of the American SociologicalSociety during its founding years; i.e., from 1906-1931. Analysis of this information, aswell as personal documents of sociologists working during this period, reveals that womendid participate within a restricted range of “expertise”, often associated with traditionalsex roles. Jane Addams was a significant figure in these early years and was a leader withinthe separate, more institutionally limited female sociologist’s network.

  11. Investigation on mechanical properties of woven alovera/sisal/kenaf ...

    Indian Academy of Sciences (India)

    1Department of Mechanical Engineering, Sri Sai Ram Institute of Technology, ... ASTM American Society for Testing and Materials ... stress [9]. Naturally the sisal fibres have the characteristics of higher wear ... In this research work an effort.

  12. Applying consensus standards to cask development

    International Nuclear Information System (INIS)

    Leatham, J.; Abbott, D.G.; Warrant, M.M.

    1987-01-01

    The Department of Energy's (DOE's) Office of Civilian Radioactive Waste Management is procuring cask systems for transporting commercial spent nuclear fuel and is encouraging development of innovative cask designs and materials to improve system efficiency. New designs and innovative materials require that consensus standards be established so that cask designers and regulators have criteria for determining acceptability. Recent DOE experience in certifying three spent fuel shipping casks, NUPAC-125B, TN-BRP, and TN-REG, is discussed. Certification of the NUPAC-125B was expedited because it was made of conventional American Society for Testing and Materials (ASTM) materials and complied with the American Society of Mechanical Engineers (ASME) Code and Nuclear Regulatory Commission Regulatory Guides. The TN-BRP and TN-REG cask designs are still being reviewed because baskets included in the casks are made of borated stainless steel, which has no ASTM Specification or ASME Code approval. The process of developing and approving consensus standards is discussed, including the role of ANSI and ANSI N14. Specific procedures for ASTM and ASME are described. A draft specification or standard must be prepared and then approved by the appropriate body. For new material applications to the ASME Code, an existing ASTM Specification is needed. These processes may require several years. The status of activities currently in progress to develop consensus standards for spent fuel casks is discussed, including (1) ASME NUPAC, and (2) ASTM Specifications for ductile cast iron and borated stainless steel

  13. Cor ASTM: um método simples e rápido para determinar a qualidade do biodiesel produzido a partir de óleos residuais de fritura ASTM color: a simple and fast method for determining quality of biodiesel produced from used cooking oils

    Directory of Open Access Journals (Sweden)

    Verônica Santos de Morais

    2013-01-01

    Full Text Available In this study, 23 biodiesel samples were produced, 20 from used cooking oil and the remaining 3 from refined soybean oil. The following properties were determined in all of the samples (oil and its respective biodiesel: density; viscosity; total acid number and ASTM color. The results indicated high correlation (R > 0.6 between ASTM color of used cooking oil and total acid number of its resultant biodiesel. This high correlation allows prediction of the quality of the biodiesel produced using a simple and fast procedure such as ASTM color.

  14. Coated 4340 Steel

    Science.gov (United States)

    2013-08-26

    Magazine, 2004, Vol. 60, No. 68, pp. 7-11. 2. A. Wrigley: Aerospace Metals, American Metal Market , of May 1994. 3. L. L. Sherir: in Corrosion 1...Electrochemistry and Engineering, ASTM STP 801, T. W. Crooker and B. N Leis, Eds., American Society for Testing and Materials, 1983, pp. 5-25. 8. B. Fitzsimons

  15. Christianity and Eugenics: The Place of Religion in the British Eugenics Education Society and the American Eugenics Society, c.1907-1940.

    Science.gov (United States)

    Baker, Graham J

    2014-05-01

    Historians have regularly acknowledged the significance of religious faith to the eugenics movement in Britain and the USA. However, much of this scholarship suggests a polarised relationship of either conflict or consensus. Where Christian believers participated in the eugenics movement this has been represented as an abandonment of 'orthodox' theology, and the impression has been created that eugenics was a secularising force. In contrast, this article explores the impact of religious values on two eugenics organisations: the British Eugenics Education Society, and the American Eugenics Society. It is demonstrated that concerns over religion resulted in both these organisations modifying and tempering the public work that they undertook. This act of concealing and minimising the visibly controversial aspects of eugenics is offered as an addition to the debate over 'mainline' versus 'reform' eugenics.

  16. Developing a research agenda for the American Society of Colon and Rectal Surgeons: results of a delphi approach.

    Science.gov (United States)

    Burt, Caroline G; Cima, Robert R; Koltun, Walter A; Littlejohn, Charles E; Ricciardi, Rocco; Temple, Larissa K; Rothenberger, David A; Baxter, Nancy N

    2009-05-01

    By use of a systematic approach, the aim of this project was to survey a group of colorectal specialists and reach a consensus on the research questions of highest importance in terms of clinical care. A modified Delphi process was performed. In Round 1 research questions were solicited from members of The American Society of Colon and Rectal Surgeons. A review group categorized the results, combined similar questions, and presented them to The American Society of Colon and Rectal Surgeons membership in Round 2 for prioritizing according to importance. In Round 3 the 50 questions with the highest scores in Round 2 were reranked by The American Society of Colon and Rectal Surgeons membership to produce the 20 highest-priority research questions. A total of 203 respondents in Round 1 submitted 746 questions. The review team reduced these to 105 individual questions encompassing 21 topics in colorectal surgical practice. In Rounds 2 and 3, 399 and 360 respondents, respectively, prioritized the questions presented. The final 20 items included 14 questions related to colorectal cancer, and 6 were on benign disease topics. The research agenda produced by this study reflects the clinical issues of greatest importance to colorectal surgeons. The results are of potential benefit to researchers, funding organizations, medical journals, and ultimately, patients.

  17. Increase in female faculty in American Society for Gastrointestinal Endoscopy-sponsored programming over time.

    Science.gov (United States)

    Enestvedt, Brintha K; DeVivo, Rebecca S; Schmitt, Colleen M; Calderwood, Audrey H

    2018-04-01

    Female representation in medicine is increasing across all levels of medical training, yet women hold fewer senior leadership positions than men. National recognition, including participation as faculty in society-sponsored programs, is one component of academic advancement. The aim of this study was to characterize female representation among faculty in courses sponsored by the American Society for Gastrointestinal Endoscopy (ASGE). We performed a retrospective review of demographic data, including faculty gender and role, year, and program type, from the ASGE database of its sponsored programs between 2009 and 2014. Female faculty rates were compared with the rate of female membership in the ASGE and by faculty role and course type over time. Between 2009 and 2014 there were a total of 2020 ASGE course faculty positions of which women comprised 19%. There was a significant increase in the proportion of women that served as course faculty over time (P < .0005). Female faculty participation exceeded the ASGE female domestic membership rate in all years. Women were more likely to serve as course directors than lecturers (25% vs 18%, P = .004) and to participate in smaller courses (P = .0003). We found an increase in female participation in ASGE programming over time, suggesting that specialty societies are making efforts to improve female representation at the national level. Future work should evaluate whether or not these opportunities translate into leadership roles for women within their own institutions or lead to promotions for women over time. Copyright © 2018 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

  18. American Society of Radiation Oncology Recommendations for Documenting Intensity-Modulated Radiation Therapy Treatments

    International Nuclear Information System (INIS)

    Holmes, Timothy; Das, Rupak; Low, Daniel; Yin Fangfang; Balter, James; Palta, Jatinder; Eifel, Patricia

    2009-01-01

    Despite the widespread use of intensity-modulated radiation therapy (IMRT) for approximately a decade, a lack of adequate guidelines for documenting these treatments persists. Proper IMRT treatment documentation is necessary for accurate reconstruction of prior treatments when a patient presents with a marginal recurrence. This is especially crucial when the follow-up care is managed at a second treatment facility not involved in the initial IMRT treatment. To address this issue, an American Society for Radiation Oncology (ASTRO) workgroup within the American ASTRO Radiation Physics Committee was formed at the request of the ASTRO Research Council to develop a set of recommendations for documenting IMRT treatments. This document provides a set of comprehensive recommendations for documenting IMRT treatments, as well as image-guidance procedures, with example forms provided.

  19. Current and future neutron radiography standards

    International Nuclear Information System (INIS)

    Brenizer, J.S.

    1999-01-01

    Only two organizations are actively producing standards which are used in neutron radiology (NR): the American Society of Testing and Materials (ASTM) and the International Organization for Standardization (ISO). Six ASTM standards exist that address the neutron radiography method. Two of the ASTM standards have been extensively used world-wide. ISO has a working group which is developing three standards that also address the neutron radiography method. Two of these are currently making their way through the ISO approval system. No ASTM or ISO standards exist for the neutron radioscopic method. Future ASTM standards will address the neutron radioscopic method and neutron radiologic system characterization. It is expected that similar efforts will be undertaken in ISO. Given the relatively small community providing neutron radiologic services, international cooperation and the need for ISO standards will most likely continue to grow.(author)

  20. Mechanical Properties of a High Lead Glass Used in the Mars Organic Molecule Analyzer

    Science.gov (United States)

    Salem, Jonathan A.; Smith, Nathan A.; Ersahin, Akif

    2015-01-01

    The elastic constants, strength, fracture toughness, slow crack growth parameters, and mirror constant of a high lead glass supplied as tubes and funnels were measured using ASTM International (formerly ASTM, American Society for Testing and Materials) methods and modifications thereof. The material exhibits lower Young's modulus and slow crack growth exponent as compared to soda-lime silica glass. Highly modified glasses exhibit lower fracture toughness and slow crack growth exponent than high purity glasses such as fused silica.

  1. Overview of the ANS [American Nuclear Society] mathematics and computation software standards

    International Nuclear Information System (INIS)

    Smetana, A.O.

    1991-01-01

    The Mathematics and Computations Division of the American Nuclear Society sponsors the ANS-10 Standards Subcommittee. This subcommittee, which is part of the ANS Standards Committee, currently maintains four ANSI/ANS software standards. These standards are: Recommended Programming Practices to Facilitate the Portability of Scientific Computer Programs, ANS-10.2; Guidelines for the Documentation of Computer Software, ANS-10.3; Guidelines for the Verification and Validation of Scientific and Engineering Computer Programs for the Nuclear Industry, ANS-10.4; and Guidelines for Accommodating User Needs in Computer Program Development, ANS-10.5. 5 refs

  2. NASA/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1991

    International Nuclear Information System (INIS)

    Tiwari, S.N.

    1991-09-01

    In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spent 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society of Engineering Education supervises the programs. The objects were the following: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate and exchange ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of the participants' institutions; and (4) to contribute to the research objectives of the NASA center

  3. American Society of Clinical Oncology/College of American Pathologists guideline recommendations for immunohistochemical testing of estrogen and progesterone receptors in breast cancer (unabridged version).

    NARCIS (Netherlands)

    Hammond, M.E.; Hayes, D.F.; Dowsett, M.; Allred, D.C.; Hagerty, K.L.; Badve, S.; Fitzgibbons, P.L.; Francis, G.; Goldstein, N.S.; Hayes, M.; Hicks, D.G.; Lester, S.; Love, R.; Mangu, P.B.; McShane, L.; Miller, K.; Osborne, C.K.; Paik, S.; Perlmutter, J.; Rhodes, A.; Sasano, H.; Schwartz, J.N.; Sweep, F.C.; Taube, S.; Torlakovic, E.E.; Valenstein, P.; Viale, G.; Visscher, D.; Wheeler, T.; Williams, R.B.; Wittliff, J.L.; Wolff, A.C.

    2010-01-01

    PURPOSE: To develop a guideline to improve the accuracy of immunohistochemical (IHC) estrogen receptor (ER) and progesterone receptor (PgR) testing in breast cancer and the utility of these receptors as predictive markers. METHODS: The American Society of Clinical Oncology and the College of

  4. Validation of the American Society for Reproductive Medicine guidelines/recommendations in white European men presenting for couple's infertility.

    Science.gov (United States)

    Ventimiglia, Eugenio; Capogrosso, Paolo; Boeri, Luca; Ippolito, Silvia; Scano, Roberta; Moschini, Marco; Gandaglia, Giorgio; Papaleo, Enrico; Montorsi, Francesco; Salonia, Andrea

    2016-10-01

    To retrospectively validate the American Society for Reproductive Medicine (ASRM) guidelines/recommendations concerning endocrine evaluation in a cohort of white European men presenting for couple's infertility. Retrospective study. Academic reproductive medicine outpatient clinic. Cohort of 1,056 consecutive infertile men (noninterracial infertile couples). Testicular volume was assessed with a Prader orchidometer. Serum hormones were measured (8-10 a.m.) in all cases. Hypogonadism was defined as total T Society definition. Semen analysis values were assessed based on the 2010 World Health Organisation reference criteria. ASRM indications for endocrine assessment in infertile men (sperm concentration Society classification criteria. Conversely, 37 (23.7%) out of 156 patients with biochemical hypogonadism would have been overlooked. The overall predictive accuracy, sensitivity, and specificity of the ASRM guidelines was 58%, 76%, and 39%, respectively. Our nomogram was not reliable enough to predict hypogonadism, despite demonstrating a significantly higher predictive accuracy (68%) than the ASRM guidelines. The current findings show that the ASRM guidelines/recommendations for male infertility workup may not be suitable for application in white European infertile men. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  5. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

    Science.gov (United States)

    Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

    2010-03-15

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site. Copyright 2010. Published by Elsevier Inc.

  6. Hypoglycemia and diabetes: a report of a workgroup of the American Diabetes Association and the Endocrine Society.

    Science.gov (United States)

    Seaquist, Elizabeth R; Anderson, John; Childs, Belinda; Cryer, Philip; Dagogo-Jack, Samuel; Fish, Lisa; Heller, Simon R; Rodriguez, Henry; Rosenzweig, James; Vigersky, Robert

    2013-05-01

    To review the evidence about the impact of hypoglycemia on patients with diabetes that has become available since the past reviews of this subject by the American Diabetes Association and The Endocrine Society and to provide guidance about how this new information should be incorporated into clinical practice. Five members of the American Diabetes Association and five members of The Endocrine Society with expertise in different aspects of hypoglycemia were invited by the Chair, who is a member of both, to participate in a planning conference call and a 2-day meeting that was also attended by staff from both organizations. Subsequent communications took place via e-mail and phone calls. The writing group consisted of those invitees who participated in the writing of the manuscript. The workgroup meeting was supported by educational grants to the American Diabetes Association from Lilly USA, LLC and Novo Nordisk and sponsorship to the American Diabetes Association from Sanofi. The sponsors had no input into the development of or content of the report. The writing group considered data from recent clinical trials and other studies to update the prior workgroup report. Unpublished data were not used. Expert opinion was used to develop some conclusions. Consensus was achieved by group discussion during conference calls and face-to-face meetings, as well as by iterative revisions of the written document. The document was reviewed and approved by the American Diabetes Association's Professional Practice Committee in October 2012 and approved by the Executive Committee of the Board of Directors in November 2012 and was reviewed and approved by The Endocrine Society's Clinical Affairs Core Committee in October 2012 and by Council in November 2012. The workgroup reconfirmed the previous definitions of hypoglycemia in diabetes, reviewed the implications of hypoglycemia on both short- and long-term outcomes, considered the implications of hypoglycemia on treatment outcomes

  7. Dosimetry-adjusted reactor physics parameters for pressure vessel neutron exposure assessment

    International Nuclear Information System (INIS)

    McElroy, W.N.; Kellogg, L.S.

    1988-01-01

    The ASTM E706 master matrix standard describes a series of 20 American Society for Testing and Materials (ASTM) standard practices, guides, and methods for use in the prediction of neutron-induced changes in light water reactor (LWR) pressure vessel (PV) and support structure steels throughout a PV's service life. Some of these are existing ASTM standards, some are ASTM standards that have been modified, and some are new ASTM standards. These standards are periodically revised to assume their applicability during the 40-yr (32 effective full-power years) design license period for a nuclear power plant. They are now under review by two new ASTM plant life extension task groups: E10.05.11 on physics dosimetry and E10.02.11 on metallurgy. A brief review on the current application of these standards and a discussion of the status of work to verify the accuracy of derived physics-dosimetry parameter values is presented in this paper

  8. Growing the science of agronomy by growing the profession: a Message from the President of the American Society of Agronomy

    Science.gov (United States)

    We often refer to the American Society of Agronomy (ASA) as being both a scientific and professional society. Membership within the organization includes a wide range of people from diverse regions and cultures of the world working with complex and diverse cropping systems. Yet members are unified...

  9. Combating Wear of ASTM A36 Steel by Surface Modification Using Thermally Sprayed Cermet Coatings

    OpenAIRE

    Shibe, Vineet; Chawla, Vikas

    2016-01-01

    Thermal spray coatings can be applied economically on machine parts to enhance their requisite surface properties like wear, corrosion, erosion resistance, and so forth. Detonation gun (D-Gun) thermal spray coatings can be applied on the surface of carbon steels to improve their wear resistance. In the present study, alloy powder cermet coatings WC-12% Co and Cr3C2-25% NiCr have been deposited on ASTM A36 steel with D-Gun thermal spray technique. Sliding wear behavior of uncoated ASTM A36 ste...

  10. Comparison of current practices of cardiopulmonary perfusion technology in Iran with American Society of Extracorporeal Technology's standards.

    Science.gov (United States)

    Faravan, Amir; Mohammadi, Nooredin; Alizadeh Ghavidel, Alireza; Toutounchi, Mohammad Zia; Ghanbari, Ameneh; Mazloomi, Mehran

    2016-01-01

    Standards have a significant role in showing the minimum level of optimal optimum and the expected performance. Since the perfusion technology staffs play an the leading role in providing the quality services to the patients undergoing open heart surgery with cardiopulmonary bypass machine, this study aimed to assess the standards on how Iranian perfusion technology staffs evaluate and manage the patients during the cardiopulmonary bypass process and compare their practice with the recommended standards by American Society of Extracorporeal Technology. In this descriptive study, data was collected from 48 Iranian public hospitals and educational health centers through a researcher-created questionnaire. The data collection questionnaire assessed the standards which are recommended by American Society of Extracorporeal Technology. Findings showed that appropriate measurements were carried out by the perfusion technology staffs to prevent the hemodilution and avoid the blood transfusion and unnecessary blood products, determine the initial dose of heparin based on one of the proposed methods, monitor the anticoagulants based on ACT measurement, and determine the additional doses of heparin during the cardiopulmonary bypass based on ACT or protamine titration. It was done only in 4.2% of hospitals and health centers. Current practices of cardiopulmonary perfusion technology in Iran are inappropriate based on the standards of American Society of Cardiovascular Perfusion. This represents the necessity of authorities' attention to the validation programs and development of the caring standards on one hand and continuous assessment of using these standards on the other hand.

  11. ASTM international workshop on standards and measurements for tissue engineering scaffolds.

    Science.gov (United States)

    Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

    2015-07-01

    The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

  12. The American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies Joint Committee recommendations for education and training in ultrasound-guided interventional pain procedures.

    Science.gov (United States)

    Narouze, Samer N; Provenzano, David; Peng, Philip; Eichenberger, Urs; Lee, Sang Chul; Nicholls, Barry; Moriggl, Bernhard

    2012-01-01

    The use of ultrasound in pain medicine for interventional axial, nonaxial, and musculoskeletal pain procedures is rapidly evolving and growing. Because of the lack of specialty-specific guidelines for ultrasonography in pain medicine, an international collaborative effort consisting of members of the Special Interest Group on Ultrasonography in Pain Medicine from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, and the Asian Australasian Federation of Pain Societies developed the following recommendations for education and training in ultrasound-guided interventional pain procedures. The purpose of these recommendations is to define the required skills for performing ultrasound-guided pain procedures, the processes for appropriate education, and training and quality improvement. Training algorithms are outlined for practice- and fellowship-based pathways. The previously published American Society of Regional Anesthesia and Pain Medicine and European Society of Regional Anaesthesia and Pain Therapy education and teaching recommendations for ultrasound-guided regional anesthesia served as a foundation for the pain medicine recommendations. Although the decision to grant ultrasound privileges occurs at the institutional level, the committee recommends that the training guidelines outlined in this document serve as the foundation for educational training and the advancement of the practice of ultrasonography in pain medicine.

  13. Clinical Utilization of Repeated Open Application Test Among American Contact Dermatitis Society Members.

    Science.gov (United States)

    Brown, Gabrielle E; Botto, Nina; Butler, Daniel C; Murase, Jenny E

    2015-01-01

    The repeated open application test (ROAT) provides useful information regarding allergens in suspected cases of allergic contact dermatitis; however, standardized methodology has not been established. The aim of this study was to assess how ROAT is used in clinical and research settings. We distributed a survey regarding ROAT practice to the American Contact Dermatitis Society and conducted a literature review of ROAT utilization in research. A total of 67 American Contact Dermatitis Society members participated in the survey. Respondents most frequently recommend application of leave-on products twice daily (46.0%) and rinse-off products once daily (43.5%). The most commonly used anatomical sites include the forearm (38.7%) and antecubital fossa (32.3%). Most respondents continue ROAT for 1 (49.2%) or 2 weeks (31.7%). Literature review of 32 studies (26 leave-on, 6 rinse-off) revealed that application frequency is most common at twice daily for both leave-on (96.2%) and rinse-off (50.0%) products. The most common anatomical site is the forearm (62.5%), with an overall study duration of 3 to 4 weeks (65.6%). When comparing ROAT clinical and research practice, the majority trend was consistent for leave-on product application frequency and anatomical site, but not for rinse-off product application frequency, or overall duration. Further research is needed to determine best practice recommendations.

  14. Recommendations for fluorescence instrument qualification: the new ASTM Standard Guide.

    Science.gov (United States)

    DeRose, Paul C; Resch-Genger, Ute

    2010-03-01

    Aimed at improving quality assurance and quantitation for modern fluorescence techniques, ASTM International (ASTM) is about to release a Standard Guide for Fluorescence, reviewed here. The guide's main focus is on steady state fluorometry, for which available standards and instrument characterization procedures are discussed along with their purpose, suitability, and general instructions for use. These include the most relevant instrument properties needing qualification, such as linearity and spectral responsivity of the detection system, spectral irradiance reaching the sample, wavelength accuracy, sensitivity or limit of detection for an analyte, and day-to-day performance verification. With proper consideration of method-inherent requirements and limitations, many of these procedures and standards can be adapted to other fluorescence techniques. In addition, procedures for the determination of other relevant fluorometric quantities including fluorescence quantum yields and fluorescence lifetimes are briefly introduced. The guide is a clear and concise reference geared for users of fluorescence instrumentation at all levels of experience and is intended to aid in the ongoing standardization of fluorescence measurements.

  15. Overview of space nuclear technologies and the American Nuclear Society

    International Nuclear Information System (INIS)

    Singleterry, R.C. Jr.

    2000-01-01

    The American Nuclear Society (ANS) has seen an aspect of the universe where nuclear technology is the best energy source available for power, transportation, etc. The National Aeronautics and Space Administration (NASA) has been exploiting this aspect of the universe by sending machines and humans into it and exploring, colonizing, industrializing, developing, inhabiting, etc. Space is the final frontier, and nuclear technology is the best suited for today's or the next century's space exploration and development. Many aspects of nuclear technology and its uses in space will be needed. ANS encompasses these and many more aspects of nuclear technology, and all have some role to play in the exploration and development of space. It should be ANS's intent to be an advisory body to NASA on the nuclear aspects of space exploration

  16. Chronic ankle pain and fibrosis successfully treated with a new noninvasive augmented soft tissue mobilization technique (ASTM): a case report.

    Science.gov (United States)

    Melham, T J; Sevier, T L; Malnofski, M J; Wilson, J K; Helfst, R H

    1998-06-01

    This clinical case report demonstrates the clinical effectiveness of a new form of soft tissue mobilization in the treatment of excessive connective tissue fibrosis (scar tissue) around an athlete's injured ankle. The scar tissue was causing the athlete to have pain with activity, pain on palpation of the ankle, decreased range of motion, and loss of function. Surgery and several months of conventional physical therapy failed to alleviate the athlete's symptoms. As a final resort, augmented soft tissue mobilization (ASTM) was administered. ASTM is an alternative nonsurgical treatment modality that is being researched at Performance Dynamics (Muncip, IN). ASTM is a process that uses ergonomically designed instruments that assist therapists in the rapid localization and effective treatment of areas exhibiting excessive soft tissue fibrosis. This is followed by a stretching and strengthening program. Upon the completion of 6 wk of ASTM therapy, the athlete had no pain and had regained full range of motion and function. This case report is an example of how a noninvasive augmented form of soft tissue mobilization (ASTM) demonstrated impressive clinical results in treating a condition caused by connective tissue fibrosis.

  17. An Official American Thoracic Society Research Statement : Current Challenges Facing Research and Therapeutic Advances in Airway Remodeling

    NARCIS (Netherlands)

    Prakash, Y S; Halayko, Andrew J; Gosens, Reinoud; Panettieri Jr., Reynold A; Camoretti-Mercado, Blanca; Penn, Raymond B; Burgess, Janette K

    2017-01-01

    BACKGROUND: Airway remodeling (AR) is a prominent feature of asthma and other obstructive lung diseases that is minimally affected by current treatments. The goals of this Official American Thoracic Society (ATS) Research Statement are to discuss the scientific, technological, economic, and

  18. The Society of Thoracic Surgeons, The Society of Cardiovascular Anesthesiologists, and The American Society of ExtraCorporeal Technology: Clinical Practice Guidelines for Cardiopulmonary Bypass--Temperature Management During Cardiopulmonary Bypass.

    Science.gov (United States)

    Engelman, Richard; Baker, Robert A; Likosky, Donald S; Grigore, Alina; Dickinson, Timothy A; Shore-Lesserson, Linda; Hammon, John W

    2015-08-01

    In order to improve our understanding of the evidence-based literature supporting temperature management during adult cardiopulmonary bypass, The Society of Thoracic Surgeons, the Society of Cardiovascular Anesthesiology and the American Society of ExtraCorporeal Technology tasked the authors to conduct a review of the peer-reviewed literature, including: 1) optimal site for temperature monitoring, 2) avoidance of hyperthermia, 3) peak cooling temperature gradient and cooling rate, and 4) peak warming temperature gradient and rewarming rate. Authors adopted the American College of Cardiology/American Heart Association method for development clinical practice guidelines, and arrived at the following recommendations: CLASS I RECOMMENDATIONS: a)The oxygenator arterial outlet blood temperature is recommended to be utilized as a surrogate for cerebral temperature measurement during CPB. (Class I, Level C) b)To monitor cerebral perfusate temperature during warming, it should be assumed that the oxygenator arterial outlet blood temperature under-estimates cerebral perfusate temperature. (Class I, Level C) c)Surgical teams should limit arterial outlet blood temperature to<37°C to avoid cerebral hyperthermia. (Class 1, Level C) d)Temperature gradients between the arterial outlet and venous inflow on the oxygenator during CPB cooling should not exceed 10°C to avoid generation of gaseous emboli. (Class 1, Level C) e)Temperature gradients between the arterial outlet and venous inflow on the oxygenator during CPB rewarming should not exceed 10°C to avoid out-gassing when blood is returned to the patient. (Class 1, Level C) CLASS IIa a)Pulmonary artery or nasopharyngeal temperature recording is reasonable for weaning and immediate post-bypass temperature measurement. (Class IIa, Level C)b)Rewarming when arterial blood outlet temperature ≥30° C: i.To achieve the desired temperature for separation from bypass, it is reasonable to maintain a temperature gradient between

  19. Promoting Ocean Literacy through American Meteorological Society Programs

    Science.gov (United States)

    Passow, Michael; Abshire, Wendy; Weinbeck, Robert; Geer, Ira; Mills, Elizabeth

    2017-04-01

    American Meteorological Society Education Programs provide course materials, online and physical resources, educator instruction, and specialized training in ocean, weather, and climate sciences (https://www.ametsoc.org/ams/index.cfm/education-careers/education-program/k-12-teachers/). Ocean Science literacy efforts are supported through the Maury Project, DataStreme Ocean, and AMS Ocean Studies. The Maury Project is a summer professional development program held at the US Naval Academy designed to enhance effective teaching of the science, technology, engineering, and mathematics of oceanography. DataStreme Ocean is a semester-long course offered twice a year to participants nationwide. Created and sustained with major support from NOAA, DS Ocean explores key concepts in marine geology, physical and chemical oceanography, marine biology, and climate change. It utilizes electronically-transmitted text readings, investigations and current environmental data. AMS Ocean Studies provides complete packages for undergraduate courses. These include online textbooks, investigations manuals, RealTime Ocean Portal (course website), and course management system-compatible files. It can be offered in traditional lecture/laboratory, completely online, and hybrid learning environments. Assistance from AMS staff and other course users is available.

  20. New improved method for evaluation of growth by food related fungi on biologically derived materials

    DEFF Research Database (Denmark)

    Bergenholtz, Karina P.; Nielsen, Per Væggemose

    2002-01-01

    Biologically derived materials, obtained as commercial and raw materials (Polylactate (PLA), Polyhydroxybutyrate (PHB), potato, wheat and corn starch) were tested for their ability to support fungal growth using a modified ASTM G21-96 (American Society for Testing and Materials) standard as well...

  1. Glove material, reservoir formation, and dose affect glove permeation and subsequent skin penetration

    DEFF Research Database (Denmark)

    Nielsen, Jesper Bo; Sørensen, Jens Ahm

    2012-01-01

    Protective gloves are used to reduce dermal exposure when managing chemical exposures at the work place. Different glove materials may offer different degrees of protection. The present study combined the traditional ASTM (American Society for Testing and Materials) model with the Franz diffusion...

  2. Implementing an innovated preservation technology: The American Society of Transplant Surgeons' (ASTS) Standards Committee White Paper on Ex Situ Liver Machine Perfusion.

    Science.gov (United States)

    Quintini, Cristiano; Martins, Paulo N; Shah, Shimul; Killackey, Mary; Reed, Alan; Guarrera, James; Axelrod, David A

    2018-05-23

    The pervasive shortage of deceased donor liver allografts contributes to significant waitlist mortality despite efforts to increase organ donation. Ex vivo liver perfusion appears to enhance preservation of donor organs, extending viability and potentially evaluating function in organs previously considered too high risk for transplant. These devices pose novel challenges for organ allocation, safety, training, and finances. This white paper describes the American Society of Transplant Surgeons' belief that organ preservation technology is a vital advance, but its use should not change fundamental aspects of organ allocation. Additional data elements need to be collected, made available for organ assessment by transplant professionals to allow determination of organ suitability in the case of reallocation and incorporated into risk adjustment methodology. Finally, further work is needed to determine the optimal strategy for management and oversight of perfused organs prior to transplantation. © 2018 The American Society of Transplantation and the American Society of Transplant Surgeons.

  3. Comparative field permeability measurement of permeable pavements using ASTM C1701 and NCAT permeameter methods.

    Science.gov (United States)

    Li, Hui; Kayhanian, Masoud; Harvey, John T

    2013-03-30

    Fully permeable pavement is gradually gaining support as an alternative best management practice (BMP) for stormwater runoff management. As the use of these pavements increases, a definitive test method is needed to measure hydraulic performance and to evaluate clogging, both for performance studies and for assessment of permeability for construction quality assurance and maintenance needs assessment. Two of the most commonly used permeability measurement tests for porous asphalt and pervious concrete are the National Center for Asphalt Technology (NCAT) permeameter and ASTM C1701, respectively. This study was undertaken to compare measured values for both methods in the field on a variety of permeable pavements used in current practice. The field measurements were performed using six experimental section designs with different permeable pavement surface types including pervious concrete, porous asphalt and permeable interlocking concrete pavers. Multiple measurements were performed at five locations on each pavement test section. The results showed that: (i) silicone gel is a superior sealing material to prevent water leakage compared with conventional plumbing putty; (ii) both methods (NCAT and ASTM) can effectively be used to measure the permeability of all pavement types and the surface material type will not impact the measurement precision; (iii) the permeability values measured with the ASTM method were 50-90% (75% on average) lower than those measured with the NCAT method; (iv) the larger permeameter cylinder diameter used in the ASTM method improved the reliability and reduced the variability of the measured permeability. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Effective Electronic Security: Process for the Development and Validation from Requirements to Testing

    Science.gov (United States)

    2013-06-01

    ABBREVIATIONS ANSI American National Standards Institute ASIS American Society of Industrial Security CCTV Closed Circuit Television CONOPS...is globally recognized for the development and maintenance of standards. ASTM defines a specification as an explicit set of requirements...www.rkb.us/saver/. One of the SAVER reports titled CCTV Technology Handbook has a chapter on system design. The report uses terms like functional

  5. Making contact for contact dermatitis: a survey of the membership of the American Contact Dermatitis Society.

    Science.gov (United States)

    Nezafati, Kaveh A; Carroll, Bryan; Storrs, Frances J; Cruz, Ponciano D

    2013-01-01

    The American Contact Dermatitis Society (ACDS) is the principal organization representing the subspecialty of contact dermatitis in the United States. The aim of this study was to characterize ACDS members with respect to demographic characteristics, patch-test practices, and sentiments regarding the Society and its journal Dermatitis. We conducted cross-sectional postal and online surveys of ACDS members. More than a third of ACDS members responded to the survey, 92% of whom practice dermatology, and most of whom are community practitioners. Responders manage patients with allergic and irritant dermatitis at a similar frequency. On average, they patch test 4 patients per week using 66 allergens per patient, which often include customized trays. Almost half of these practitioners learned patch testing from their residency programs. Most of the responders read and value the Society journal, value the Contact Allergen Management Program database, and attend society meetings. The ACDS is comprised overwhelmingly of dermatologists who are primarily community-based, young relative to the start of their practices, and use the Society's resources for continuing education.

  6. Official American Thoracic Society technical standards: spirometry in the occupational setting.

    Science.gov (United States)

    Redlich, Carrie A; Tarlo, Susan M; Hankinson, John L; Townsend, Mary C; Eschenbacher, William L; Von Essen, Susanna G; Sigsgaard, Torben; Weissman, David N

    2014-04-15

    This document addresses aspects of the performance and interpretation of spirometry that are particularly important in the workplace, where inhalation exposures can affect lung function and cause or exacerbate lung diseases, such as asthma, chronic obstructive pulmonary disease, or fibrosis. Issues that previous American Thoracic Society spirometry statements did not adequately address with respect to the workplace were identified for systematic review. Medline 1950-2012 and Embase 1980-2012 were searched for evidence related to the following: training for spirometry technicians; testing posture; appropriate reference values to use for Asians in North America; and interpretative strategies for analyzing longitudinal change in lung function. The evidence was reviewed and technical recommendations were developed. Spirometry performed in the work setting should be part of a comprehensive workplace respiratory health program. Effective technician training and feedback can improve the quality of spirometry testing. Posture-related changes in FEV1 and FVC, although small, may impact interpretation, so testing posture should be kept consistent and documented on repeat testing. Until North American Asian-specific equations are developed, applying a correction factor of 0.88 to white reference values is considered reasonable when testing Asian American individuals in North America. Current spirometry should be compared with previous tests. Excessive loss in FEV1 over time should be evaluated using either a percentage decline (15% plus loss expected due to aging) or one of the other approaches discussed, taking into consideration testing variability, worker exposures, symptoms, and other clinical information. Important aspects of workplace spirometry are discussed and recommendations are provided for the performance and interpretation of workplace spirometry.

  7. Christianity and Eugenics: The Place of Religion in the British Eugenics Education Society and the American Eugenics Society, c.1907–1940

    Science.gov (United States)

    Baker, Graham J.

    2014-01-01

    Historians have regularly acknowledged the significance of religious faith to the eugenics movement in Britain and the USA. However, much of this scholarship suggests a polarised relationship of either conflict or consensus. Where Christian believers participated in the eugenics movement this has been represented as an abandonment of ‘orthodox’ theology, and the impression has been created that eugenics was a secularising force. In contrast, this article explores the impact of religious values on two eugenics organisations: the British Eugenics Education Society, and the American Eugenics Society. It is demonstrated that concerns over religion resulted in both these organisations modifying and tempering the public work that they undertook. This act of concealing and minimising the visibly controversial aspects of eugenics is offered as an addition to the debate over ‘mainline’ versus ‘reform’ eugenics. PMID:24778464

  8. The American Society for Clinical Pathology's 2015 Wage Survey of Medical Laboratories in the United States.

    Science.gov (United States)

    Garcia, Edna; Fisher, Patrick B

    2017-05-01

    To inform the pathology and laboratory field of the most recent national wage data from the American Society for Clinical Pathology (ASCP). Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2015 wage survey was conducted through collaboration between the ASCP's Institute of Science, Technology, and Policy in Washington, DC, and the ASCP Board of Certification in Chicago, Illinois. Electronic survey invitations were sent to individuals who are currently practicing in the field. Data reveal increased salaries since 2013 for all staff-level laboratory professionals surveyed except phlebotomists and pathologists' assistants. Laboratory assistants and phlebotomists, regardless of level, continue to have lower salaries while pathologists' assistants and administration personnel have higher salaries than the rest of the laboratory professions surveyed. Survey results put emphasis on strategic recruitment and retention by laboratory training programs and institutions that hire laboratory professionals. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  9. Automated acid and base number determination of mineral-based lubricants by fourier transform infrared spectroscopy: commercial laboratory evaluation.

    Science.gov (United States)

    Winterfield, Craig; van de Voort, F R

    2014-12-01

    The Fluid Life Corporation assessed and implemented Fourier transform infrared spectroscopy (FTIR)-based methods using American Society for Testing and Materials (ASTM)-like stoichiometric reactions for determination of acid and base number for in-service mineral-based oils. The basic protocols, quality control procedures, calibration, validation, and performance of these new quantitative methods are assessed. ASTM correspondence is attained using a mixed-mode calibration, using primary reference standards to anchor the calibration, supplemented by representative sample lubricants analyzed by ASTM procedures. A partial least squares calibration is devised by combining primary acid/base reference standards and representative samples, focusing on the main spectral stoichiometric response with chemometrics assisting in accounting for matrix variability. FTIR(AN/BN) methodology is precise, accurate, and free of most interference that affects ASTM D664 and D4739 results. Extensive side-by-side operational runs produced normally distributed differences with mean differences close to zero and standard deviations of 0.18 and 0.26 mg KOH/g, respectively. Statistically, the FTIR methods are a direct match to the ASTM methods, with superior performance in terms of analytical throughput, preparation time, and solvent use. FTIR(AN/BN) analysis is a viable, significant advance for in-service lubricant analysis, providing an economic means of trending samples instead of tedious and expensive conventional ASTM(AN/BN) procedures. © 2014 Society for Laboratory Automation and Screening.

  10. The American Society of Clinical Oncology's Efforts to Support Global Cancer Medicine

    Science.gov (United States)

    El-Saghir, Nagi S.; Cufer, Tanja; Cazap, Eduardo; de Guzman, Roselle; Othieno-Abinya, Nicholas Anthony; Sanchez, Jose Angel; Pyle, Doug

    2016-01-01

    Despite much progress in the management of malignant diseases, the number of new cases and cancer-related deaths continues to rise around the world. More than half of new cases occur in economically developing countries, where more than two thirds of cancer deaths are expected. However, implementation of all necessary steps to accomplish the dissemination of state-of-the-art prevention, diagnosis, and management will require increased allocation of resources, and, more importantly, harmonization of the efforts of hundreds of national and international public health agencies, policy-setting bodies, governments, pharmaceutical companies, and philanthropic organizations. More than 30% of the members of the American Society of Clinical Oncology (ASCO) reside and practice outside US borders, and more than half of attendees at all of the scientific congresses and symposia organized by ASCO are international. As cancer has become an increasingly global disease, ASCO has evolved as a global organization. The ASCO Board of Directors currently includes members from France, Brazil, and Canada. In 2013, the ASCO Board of Directors identified a number of strategic priorities for the future. Recognizing the importance of non-US members to the society, their first strategic priority was improving the society's service to non-US members and defining these members' identity in the international oncology community. This article reviews current ASCO activities in the international arena and its future plans in global oncology. PMID:26578614

  11. Making Materials Science and Engineering Data More Valuable Research Products (Postprint)

    Science.gov (United States)

    2014-09-12

    uncertainties in the publishing market - place.b Also, there is a possibility that some for-profit publishers could try to restrict access to digital...Kaufman JG, Glatzman JS (eds) Computerization and networking of materials databases: Second Volume, ASTM STP 1106. American Society for Testing and

  12. Electronic Publishing and The American Astronomical Society

    Science.gov (United States)

    Milkey, R. W.

    1999-12-01

    Electronic Publishing has created, and will continue to create, new opportunities and challenges for representing scientific work in new media and formats. The AAS will position itself to take advantage of these, both for newly created works and for improved representation of works already published. It is the view of the AAS that we hold the works that we publish in trust for our community and are obligated to protect the integrity of these works and to assure that they continue to be available to the research community. Assignment of copyright to the AAS by the author plays a central role in the preservation of the integrity and accessability of the literature published by the American Astronomical Society. In return for such assignment the AAS allows the author to freely use the work for his/her own purpose and to control the grant of permission to third parties to use such materials. The AAS retains the right to republish the work in whatever format or medium, and to retain the rights after the author's death. Specific advantages to this approach include: Assurance of the continued availability of the materials to the research and educational communities; A guarantee of the intellectual integrity of the materials in the archive; Stimulation of the development of new means of presentation or of access to the archival literature; and Provision of a uniformity of treatment for copyright issues and to relieve the individual authors of much of the administrative work.

  13. Maintaining the competitiveness of the American fisheries society journals: an assessment based on influence and cost-effectiveness

    Science.gov (United States)

    Hewitt, David A.; Link, Jason S.; Steinich, Dave R.; Wahl, David H.; Mather, Martha E.

    2009-01-01

    Recent changes in the landscape of scientific publishing prompted the Publications Overview Committee of the American Fisheries Society (AFS) to review the Society's portfolio of scientific journals. We evaluated journals based on metrics in two categories: (1) citation-based measures of the influence of a journal on the scientific literature, and (2) measures of the cost-effectiveness of a journal (citation rate adjusted for subscription cost). Over the long-term, we found that ecology journals had far stronger citation-based influence than fisheries and aquatic sciences journals, and that journals publishing primarily basic research had stronger influence than journals publishing applied research (including four AFS journals and Fisheries magazine). In evaluating the current status of fisheries and aquatic sciences journals, we found that metrics of influence and cost-effectiveness provided considerably different portrayals of journals relative to their peers. In terms of citation-based influence, we found that the AFS journal Transactions of the American Fisheries Society (TAFS) and Fisheries magazine were competitive with highly regarded peer fisheries journals, but that North American Journal of Aquaculture (NAJA) and Journal of Aquatic Animal Health (JAAH) were less influential than their peers. The citation-based influence of North American Journal of Fisheries Management (NAJFM) was intermediate between TAFS/Fisheries and NAJA/JAAH. For journals like NAJFM and NAJA, we expect that much of the scientific influence on policy and management is not captured by citations in the primary literature, and alternative methods of evaluation may be needed. All of the AFS journals ranked highly with regard to cost-effectiveness because their subscription costs are low, and these rankings are in accordance with membership needs and the strategic mission of AFS to provide broad and timely dissemination of scientific information. We conclude by suggesting

  14. American Fisheries Society 136th Annual Meeting Lake Placid, NY 10-14 September, 2006

    Science.gov (United States)

    Einhouse, D.; Walsh, M.G.; Keeler, S.; Long, J.M.

    2005-01-01

    The New York Chapter of the American Fisheries Society and the New York State Department of Environmental Conservation invite you to experience the beauty of New York's famous Adirondack Park as the American Fisheries Society (AFS) convenes its 136th Annual Meeting in the legendary Olympic Village of Lake Placid, NY, 10-14 September 2006. Our meeting theme "Fish in the Balance" will explore the interrelation between fish, aquatic habitats, and man, highlighting the challenges facing aquatic resource professionals and the methods that have been employed to resolve conflicts between those that use or have an interest in our aquatic resources. As fragile as it is beautiful, the Adirondack Region is the perfect location to explore this theme. Bordered by Mirror Lake and its namesake, Lake Placid, the Village of Lake Placid has small town charm, but all of the conveniences that a big city would provide. Whether its reliving the magic of the 1980 hockey team's "Miracle on Ice" at the Lake Placid Olympic Center, getting a panoramic view of the Adirondack high peaks from the top of the 90 meter ski jumps, fishing or kayaking in adjacent Mirror Lake, hiking a mountain trail, or enjoying a quiet dinner or shopping excursion in the various shops and restaurants that line Main Street, Lake Placid has something for everyone.

  15. Vacuum decay container/closure integrity testing technology. Part 1. ASTM F2338-09 precision and bias studies.

    Science.gov (United States)

    Wolf, Heinz; Stauffer, Tony; Chen, Shu-Chen Y; Lee, Yoojin; Forster, Ronald; Ludzinski, Miron; Kamat, Madhav; Godorov, Phillip; Guazzo, Dana Morton

    2009-01-01

    ASTM F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method is applicable for leak-testing rigid and semi-rigid non-lidded trays; trays or cups sealed with porous barrier lidding materials; rigid, nonporous packages; and flexible, nonporous packages. Part 1 of this series describes the precision and bias studies performed in 2008 to expand this method's scope to include rigid, nonporous packages completely or partially filled with liquid. Round robin tests using three VeriPac 325/LV vacuum decay leak testers (Packaging Technologies & Inspection, LLC, Tuckahoe, NY) were performed at three test sites. Test packages were 1-mL glass syringes. Positive controls had laser-drilled holes in the barrel ranging from about 5 to 15 microm in nominal diameter. Two different leak tests methods were performed at each site: a "gas leak test" performed at 250 mbar (absolute) and a "liquid leak test" performed at about 1 mbar (absolute). The gas leak test was used to test empty, air-filled syringes. All defects with holes > or = 5.0 microm and all no-defect controls were correctly identified. The only false negative result was attributed to a single syringe with a ASTM F2338-09 test method and the precision and bias study report are available by contacting ASTM International in West Conshohocken, PA, USA (www.astm.org).

  16. Overview (this manuscript is an overview of an ASTM ...

    Science.gov (United States)

    The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the standards development meetings of the Committee. ASTM D22.05 is developing tools to answer fundamental questions: what is emitted from SPF, how long do the emissions persist, how does ventilation impact concentrations and potential exposures? How can we model these processes to address the multiplicity of products, applications, and environmental conditions that may impact exposure to emissions over the life cycle of the material? These are complex and interrelated questions that have challenged the indoor environments research community for many years. Objectives of Symposium: Standardized methods are needed to assess the potential impacts of SPF insulation products on indoor air quality, establish re-entry times for trade workers or re-occupancy times for building occupants after product installation and to evaluate post-occupancy ventilation. The objective of the symposium was to provide a forum for the exchange of ideas from SPF manufacturers, regulatory agencies, indoor air quality professionals, testing labs, air quality consultants, instrument vendors and other stakeholders. Following the presentations on the current status of measuring emissions from SPF insulation, participants di

  17. Opting out or denying discrimination? How the framework of free choice in American society influences perceptions of gender inequality.

    Science.gov (United States)

    Stephens, Nicole M; Levine, Cynthia S

    2011-10-01

    American women still confront workplace barriers (e.g., bias against mothers, inflexible policies) that hinder their advancement at the upper levels of organizations. However, most Americans fail to recognize that such gender barriers still exist. Focusing on mothers who have left the workforce, we propose that the prevalent American assumption that actions are a product of choice conceals workplace barriers by communicating that opportunities are equal and that behavior is free from contextual influence. Study 1 reveals that stay-at-home mothers who view their own workplace departure as an individual choice experience greater well-being but less often recognize workplace barriers and discrimination as a source of inequality than do mothers who do not view their workplace departure as an individual choice. Study 2 shows that merely exposing participants to a message that frames actions in terms of individual choice increases participants' belief that society provides equal opportunities and that gender discrimination no longer exists. By concealing the barriers that women still face in the workplace, this choice framework may hinder women's long-term advancement in society.

  18. State, market and civil society: Latin American development in comparative perspective

    Directory of Open Access Journals (Sweden)

    Menno Vellinga

    2010-06-01

    Full Text Available In the 1980s Latin America made a radical break with the model of development that had been pursued by most countries on the continent for the last fifty years and implemented a new development strategy, defined along neo-liberal lines. These changes have taken place under conditions of increasing globalization, e.g. they had to be realized increasingly within globally defined parameters and structures. The relationship between the state, the market and civil society was redefined. The traditional structures of interest representation of groups and classes, their legitimacy and effectiveness underwent significant changes in many countries. In this article we will explore the nature of these changes and their consequences for state reform and the relation to problems of national development. We will do so in a comparative perspective, including experiences from South East Asia. The debate about the relationship between state, market and civil society has received a new impetus from the 2008 crisis of the international financial system and the widely spread criticism of the workings of the market capitalism that it has generated. For Latin American development the conclusions of this debate and their possible translation into concrete policies are of the utmost importance.

  19. Symposium for Alfred Wolf's 75th birthday at American Chemical Society meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-02

    This report contains abstracts from the symposium presented by the Division of Nuclear Chemistry and Technology of the American Chemical Society. Sessions covered the following topics: Therapeutic radionuclides--Making the right choice; Aspects of nuclear science; Nuclear structure with large gamma-ray detector arrays and their auxiliary devices; Thirty years of research in nuclear dynamics--From fission to the quark-gluon plasma; Chelated metal ions for diagnosis and therapy; Radiochemistry--Basic and applied; and Applications of small accelerators in science and industry.

  20. Disillusionment of the American Dream——On An American Tragedy

    Institute of Scientific and Technical Information of China (English)

    管秀丽

    2008-01-01

    Theodore Dreiser is now regarded as one of the pre-eminent American realistic novelists of the first half of the twentieth century.an anatomist of the American Dream.In his great work An American Tragedy,Dreis- er exposes and criticizes mercilessly the corruption and black side of American society.The disillusionment of the American Dream is an important theme of the fiction.This paper illustrates "An American Tragedy" is the re- flection of disillusionment of the American Dream in the perspectives of the tragedy of a mortal,the tragedy of American society,and the tragedy of the American Dream.

  1. Mechanical properties of ASTM A508 Class 4 steel used in the LWBR closure head and support flange (LWBR Development Program)

    International Nuclear Information System (INIS)

    Allen, R.M.; Hall, J.F.

    1978-07-01

    The LWBR closure head and support flange are manufactured from forgings of ASTM A508 Class 4 steel rather than the ASTM A508 Class 2 forging material more commonly used in reactor vessels and closure heads. Forgings involved were approximately 300,000 pounds and 46,000 pounds. The extensive material test program conducted on ASTM A508 Class 4 LWBR forgings is described. The results of the tests confirm that the A508 Class 4 material used for the LWBR forgings has been quite good through thickness, fracture toughness, and strength properties and fully meet all specified requirements

  2. Meeting American Geriatrics Society Competencies: Are Residents Meeting Expectations for Quality Care of Older Adults?

    Science.gov (United States)

    Bynum, Debra L; Wilson, Lindsay A; Ong, Thuan; Callahan, Kathryn E; Dalton, Thomas; Ohuabunwa, Ugochi

    2015-09-01

    In order to determine how often internal medicine and family medicine residents performed specific actions related to the geriatric competencies established by the American Geriatrics Society (AGS) when caring for older hospitalized adults, a cross-sectional anonymous survey of residents at the University of North Carolina, University of Washington, Wake Forest University, Duke University, and Emory University was undertaken. Data on frequency of self-reported behaviors were analyzed, with comparisons made for different levels of training, institution, and program. A total of 375 residents responded for an overall response rate of 48%. Residents reported that they often do not demonstrate all of the AGS recommended core competencies when caring for older adults in the hospital setting. Residents report more frequently performing activities that are routinely integrated into hospital systems such as reviewing medication lists, working with an interdisciplinary team, evaluating for inappropriate bladder catheters, and evaluating for pressure ulcers. There were no consistent differences between institutions and only minor differences noted between Family Medicine and Internal Medicine residents. Operationalizing core competencies by integrating them into hospital systems' quality process indicators may prompt more consistent high-quality care and ensure systems support residents' competence. © 2015, Copyright the Authors Journal compilation © 2015, The American Geriatrics Society.

  3. Fretting-corrosion at the modular tapers interface: Inspection of standard ASTM F1875-98.

    Science.gov (United States)

    Bingley, Rachel; Martin, Alan; Manfredi, Olivia; Nejadhamzeeigilani, Mahdiyar; Oladokun, Abimbola; Beadling, Andrew Robert; Siddiqui, Sohail; Anderson, James; Thompson, Jonathan; Neville, Anne; Bryant, Michael

    2018-05-01

    Interest in the degradation mechanisms at the modular tapers interfaces has been renewed due to increased reported cases of adverse reactions to metal debris and the appearance of wear and corrosion at the modular tapers interfaces at revision. Over the past two decades, a lot of research has been expended to understand the degradation mechanisms, with two primary implant loading procedures and orientations used consistently across the literature. ASTM F1875-98 is often used as a guide to understand and benchmark the tribocorrosion processes occurring within the modular tapers interface. This article presents a comparison of the two methods outlined in ASTM F1875-98 as well as a critique of the standard considering the current paradigm in pre-clinical assessment of modular tapers.

  4. 76 FR 62762 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe From Japan...

    Science.gov (United States)

    2011-10-11

    ... Fahrenheit, at various American Society of Mechanical Engineers (``ASME'') code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for..., or pressure pipe applications. B. Finished and unfinished oil country tubular goods (``OCTG''), if...

  5. 40 CFR 205.153 - Engine displacement.

    Science.gov (United States)

    2010-07-01

    ..., in accordance with American Society for Testing Materials (ASTM) E 29-67. (b) For rotary engines... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Engine displacement. 205.153 Section... TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Motorcycles § 205.153 Engine displacement. (a) Engine...

  6. An official American Thoracic Society workshop report: stem cells and cell therapies in lung biology and diseases.

    Science.gov (United States)

    Weiss, Daniel J; Chambers, Daniel; Giangreco, Adam; Keating, Armand; Kotton, Darrell; Lelkes, Peter I; Wagner, Darcy E; Prockop, Darwin J

    2015-04-01

    The University of Vermont College of Medicine and the Vermont Lung Center, in collaboration with the NHLBI, Alpha-1 Foundation, American Thoracic Society, European Respiratory Society, International Society for Cell Therapy, and the Pulmonary Fibrosis Foundation, convened a workshop, "Stem Cells and Cell Therapies in Lung Biology and Lung Diseases," held July 29 to August 1, 2013 at the University of Vermont. The conference objectives were to review the current understanding of the role of stem and progenitor cells in lung repair after injury and to review the current status of cell therapy and ex vivo bioengineering approaches for lung diseases. These are all rapidly expanding areas of study that both provide further insight into and challenge traditional views of mechanisms of lung repair after injury and pathogenesis of several lung diseases. The goals of the conference were to summarize the current state of the field, discuss and debate current controversies, and identify future research directions and opportunities for both basic and translational research in cell-based therapies for lung diseases. This conference was a follow-up to four previous biennial conferences held at the University of Vermont in 2005, 2007, 2009, and 2011. Each of those conferences, also sponsored by the National Institutes of Health, American Thoracic Society, and Respiratory Disease Foundations, has been important in helping guide research and funding priorities. The major conference recommendations are summarized at the end of the report and highlight both the significant progress and major challenges in these rapidly progressing fields.

  7. The Status of silicosis in the world: Feedback on the ASTM Silica Symposium

    CSIR Research Space (South Africa)

    Pretorius, CJ

    2013-06-01

    Full Text Available The second ASTM Silica Symposium was held in Oct 2012 where speakers reported on the status of silicosis in their respective countries. Speakers reported on findings of research that they carried out on sampling equipment and analytical techniques...

  8. ASTM clustering for improving coal analysis by near-infrared spectroscopy.

    Science.gov (United States)

    Andrés, J M; Bona, M T

    2006-11-15

    Multivariate analysis techniques have been applied to near-infrared (NIR) spectra coals to investigate the relationship between nine coal properties (moisture (%), ash (%), volatile matter (%), fixed carbon (%), heating value (kcal/kg), carbon (%), hydrogen (%), nitrogen (%) and sulphur (%)) and the corresponding predictor variables. In this work, a whole set of coal samples was grouped into six more homogeneous clusters following the ASTM reference method for classification prior to the application of calibration methods to each coal set. The results obtained showed a considerable improvement of the error determination compared with the calibration for the whole sample set. For some groups, the established calibrations approached the quality required by the ASTM/ISO norms for laboratory analysis. To predict property values for a new coal sample it is necessary the assignation of that sample to its respective group. Thus, the discrimination and classification ability of coal samples by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) in the NIR range was also studied by applying Soft Independent Modelling of Class Analogy (SIMCA) and Linear Discriminant Analysis (LDA) techniques. Modelling of the groups by SIMCA led to overlapping models that cannot discriminate for unique classification. On the other hand, the application of Linear Discriminant Analysis improved the classification of the samples but not enough to be satisfactory for every group considered.

  9. In-place thermal annealing of nuclear reactor pressure vessels

    International Nuclear Information System (INIS)

    Server, W.L.

    1985-04-01

    Radiation embrittlement of ferritic pressure vessel steels increases the ductile-brittle transition temperature and decreases the upper shelf level of toughness as measured by Charpy impact tests. A thermal anneal cycle well above the normal operating temperature of the vessel can restore most of the original Charpy V-notch energy properties. The Amry SM-1A test reactor vessel was wet annealed in 1967 at less than 343 0 C (650 0 F), and wet annealing of the Belgian BR-3 reactor vessel at 343 0 C (650 0 F) has recently taken place. An industry survey indicates that dry annealing a reactor vessel in-place at temperatures as high as 454 0 C (850 0 F) is feasible, but solvable engineering problems do exist. Economic considerations have not been totally evaluated in assessing the cost-effectiveness of in-place annealing of commercial nuclear vessels. An American Society for Testing and Materials (ASTM) task group is upgrading and revising guide ASTM E 509-74 with emphasis on the materials and surveillance aspects of annealing rather than system engineering problems. System safety issues are the province of organizations other than ASTM (e.g., the American Society of Mechanical Engineers Boiler and Pressure Vessel Code body)

  10. Base catalyzed transesterification of wild apricot kernel oil for ...

    African Journals Online (AJOL)

    Fuel properties, such as density, specific gravity, kinematic viscosity, color, flash, cloud and pour point were in accordance with American Society for Testing and Materials (ASTM) D 6751. However, the cloud, and pour points were slightly higher than the conventional diesel fuel. Results of the present investigation revealed ...

  11. 75 FR 38781 - Certain Large Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe From Japan...

    Science.gov (United States)

    2010-07-06

    ... Fahrenheit, at various American Society of Mechanical Engineers (``ASME'') code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for.... B. Finished and unfinished oil country tubular goods (``OCTG''), if covered by the scope of another...

  12. Modification of ASTM Standard E1681 on Environmental Cracking to Include Bolt-Load Specimen Testing

    National Research Council Canada - National Science Library

    Underwood, Jean D. M

    1997-01-01

    Benet Laboratories experience with environmental cracking of cannon components has been combined with the technical expertise of various participants at ASTM technical meetings and symposia to develop...

  13. Joint American Nuclear Society and Health Physics Society Conference: Applicability of Radiation Response Models to Low Dose Protection Standards.

    Science.gov (United States)

    Glines, Wayne M; Markham, Anna

    2018-05-01

    Seventy-five years after the Hanford Site was initially created as the primary plutonium production site for atomic weapons development under the Manhattan Project, the American Nuclear Society and the Health Physics Society are sponsoring a conference from 30 September through 3 October 2018, in Pasco, Washington, titled "Applicability of Radiation Response Models to Low Dose Protection Standards." The goal of this conference is to use current scientific data to update the approach to regulating low-level radiation doses; i.e., to answer a quintessential question of radiation protection-how to best develop radiation protection standards that protect human populations against detrimental effects while allowing the beneficial uses of radiation and radioactive materials. Previous conferences (e.g., "Wingspread Conference," "Arlie Conference") have attempted to address this question; but now, almost 20 y later, the key issues, goals, conclusions, and recommendations of those two conferences remain and are as relevant as they were then. Despite the best efforts of the conference participants and increased knowledge and understanding of the science underlying radiation effects in human populations, the bases of current radiation protection standards have evolved little. This 2018 conference seeks to provide a basis and path forward for evolving radiation protection standards to be more reflective of current knowledge and understanding of low dose response models.

  14. The Big Chill: Changes in American Politics and Society from the Late 1960s to the Present.

    Science.gov (United States)

    Webster, David S.

    This essay looks at three kinds of changes in American society over the period from the late 1960s to the mid-1990s. First, data from the Cooperative Institutional Research Program (CIRP) are used to measure trends in college freshmen's political identification, materialism, concern for law and order, and concern for helping others. In all these…

  15. Executive Summary of the American College of Surgeons/Surgical Infection Society Surgical Site Infection Guidelines-2016 Update.

    Science.gov (United States)

    Ban, Kristen A; Minei, Joseph P; Laronga, Christine; Harbrecht, Brian G; Jensen, Eric H; Fry, Donald E; Itani, Kamal M F; Dellinger, E Patchen; Ko, Clifford Y; Duane, Therese M

    Guidelines regarding the prevention, detection, and management of surgical site infections (SSIs) have been published previously by a variety of organizations. The American College of Surgeons (ACS)/Surgical Infection Society (SIS) Surgical Site Infection (SSI) Guidelines 2016 Update is intended to update these guidelines based on the current literature and to provide a concise summary of relevant topics.

  16. Position of the American Dietetic Association, School Nutrition Association, and Society for Nutrition Education: Comprehensive School Nutrition Services

    Science.gov (United States)

    Briggs, Marilyn; Mueller, Constance G.; Fleischhacker, Sheila

    2010-01-01

    It is the position of the American Dietetic Association (ADA), School Nutrition Association (SNA), and Society for Nutrition Education (SNE) that comprehensive, integrated nutrition services in schools, kindergarten through grade 12, are an essential component of coordinated school health programs and will improve the nutritional status, health,…

  17. Assessing Clinical Microbiology Practice Guidelines: American Society for Microbiology Ad Hoc Committee on Evidence-Based Laboratory Medicine Practice Guidelines Assessment.

    Science.gov (United States)

    Nachamkin, Irving; Kirn, Thomas J; Westblade, Lars F; Humphries, Romney

    2017-11-01

    As part of the American Society for Microbiology (ASM) Evidence-Based Laboratory Medicine Practice Guidelines Committee of the Professional Practice Committee, an ad hoc committee was formed in 2014 to assess guidelines published by the committee using an assessment tool, Appraisal of Guidelines for Research Evaluation II (AGREE II). The AGREE II assessment helps reviewers determine whether published guidelines are robust, transparent, and clear in presenting practice recommendations in a standardized manner. Identifying strengths and weaknesses of practice guidelines by ad hoc assessments helps with improving future guidelines through the participation of key stakeholders. This minireview describes the development of the ad hoc committee and results from their review of several ASM best practices guidelines and a non-ASM practice guideline from the Emergency Nurses Association. Copyright © 2017 American Society for Microbiology.

  18. 40 CFR 1060.810 - What materials does this part reference?

    Science.gov (United States)

    2010-07-01

    ... 51. Anyone may inspect copies at the U.S. EPA, Air and Radiation Docket and Information Center, 1301... Records Administration (NARA). For information on the availability of this material at NARA, call 202-741.... (a) ASTM material. Table 1 to this section lists material from the American Society for Testing and...

  19. An Official American Thoracic Society Workshop Report 2015. Stem Cells and Cell Therapies in Lung Biology and Diseases.

    Science.gov (United States)

    Wagner, Darcy E; Cardoso, Wellington V; Gilpin, Sarah E; Majka, Susan; Ott, Harald; Randell, Scott H; Thébaud, Bernard; Waddell, Thomas; Weiss, Daniel J

    2016-08-01

    The University of Vermont College of Medicine, in collaboration with the NHLBI, Alpha-1 Foundation, American Thoracic Society, Cystic Fibrosis Foundation, European Respiratory Society, International Society for Cellular Therapy, and the Pulmonary Fibrosis Foundation, convened a workshop, "Stem Cells and Cell Therapies in Lung Biology and Lung Diseases," held July 27 to 30, 2015, at the University of Vermont. The conference objectives were to review the current understanding of the role of stem and progenitor cells in lung repair after injury and to review the current status of cell therapy and ex vivo bioengineering approaches for lung diseases. These are all rapidly expanding areas of study that both provide further insight into and challenge traditional views of mechanisms of lung repair after injury and pathogenesis of several lung diseases. The goals of the conference were to summarize the current state of the field, discuss and debate current controversies, and identify future research directions and opportunities for both basic and translational research in cell-based therapies for lung diseases. This 10th anniversary conference was a follow up to five previous biennial conferences held at the University of Vermont in 2005, 2007, 2009, 2011, and 2013. Each of those conferences, also sponsored by the National Institutes of Health, American Thoracic Society, and respiratory disease foundations, has been important in helping guide research and funding priorities. The major conference recommendations are summarized at the end of the report and highlight both the significant progress and major challenges in these rapidly progressing fields.

  20. American Society for Microbiology resources in support of an evidence-based approach to teaching microbiology.

    Science.gov (United States)

    Merkel, Susan M

    2016-08-01

    Numerous national reports have addressed the need for changing how science courses in higher education are taught, so that students develop a deeper understanding of critical concepts and the analytical and cognitive skills needed to address future challenges. This review presents some evidence-based approaches to curriculum development and teaching. Results from discipline-based education research indicate that it is critically important for educators to formulate learning goals, provide frequent and authentic assessments and actively engage students in their learning. Professional societies can play a role in helping to put these changes into practice. To this end, the American Society for Microbiology has developed a number of educational programs and resources, which are described here to encourage the implementation of student-centered learning in microbiology education. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. American Society for Radiation Oncology (ASTRO) and American College of Radiology (ACR) Practice Guideline for the Performance of High-Dose-Rate Brachytherapy

    International Nuclear Information System (INIS)

    Erickson, Beth A.; Demanes, D. Jeffrey; Ibbott, Geoffrey S.; Hayes, John K.; Hsu, I-Chow J.; Morris, David E.; Rabinovitch, Rachel A.; Tward, Jonathan D.; Rosenthal, Seth A.

    2011-01-01

    High-Dose-Rate (HDR) brachytherapy is a safe and efficacious treatment option for patients with a variety of different malignancies. Careful adherence to established standards has been shown to improve the likelihood of procedural success and reduce the incidence of treatment-related morbidity. A collaborative effort of the American College of Radiology (ACR) and American Society for Therapeutic Radiation Oncology (ASTRO) has produced a practice guideline for HDR brachytherapy. The guideline defines the qualifications and responsibilities of all the involved personnel, including the radiation oncologist, physicist and dosimetrists. Review of the leading indications for HDR brachytherapy in the management of gynecologic, thoracic, gastrointestinal, breast, urologic, head and neck, and soft tissue tumors is presented. Logistics with respect to the brachytherapy implant procedures and attention to radiation safety procedures and documentation are presented. Adherence to these practice guidelines can be part of ensuring quality and safety in a successful HDR brachytherapy program.

  2. The American Society for Clinical Pathology's 2014 vacancy survey of medical laboratories in the United States.

    Science.gov (United States)

    Garcia, Edna; Ali, Asma M; Soles, Ryan M; Lewis, D Grace

    2015-09-01

    To determine the extent and distribution of workforce shortages within the nation's medical laboratories. Historically, the results of this biennial survey have served as a basis for additional research on laboratory recruitment, retention, education, marketing, certification, and advocacy. The 2014 Vacancy Survey was conducted through collaboration between American Society for Clinical Pathology's Institute of Science, Technology, and Policy in Washington, DC, and the Evaluation, Measurement, and Assessment Department and Board of Certification in Chicago, Illinois. Data were collected via an Internet survey that was distributed to individuals who were able to report on staffing and certifications for their laboratories. Data reveal increased overall vacancy rates since 2012 for all departments surveyed except cytology and cytogenetics. Also, results show higher anticipated retirement rates for both staff and supervisors. Overall certification rates are highest among laboratory personnel in cytogenetics, hematology/coagulation, and flow cytometry departments and lowest among phlebotomy, specimen processing, and anatomic pathology. Factors such as retirement and the improving economy are driving the need for more laboratory professionals. Recruitment of qualified laboratory professionals in the workforce and students in laboratory programs will be the key in fulfilling the higher vacancies revealed from the survey results in 2014. Copyright© by the American Society for Clinical Pathology.

  3. American Orthopaedic Society for Sports Medicine

    Science.gov (United States)

    ... Upcoming Meetings Online Education Archived Meetings Faculty Resources Sports Medicine Fellowships Traveling Fellowship Submit an Abstract Submit ... Support AOSSM Research Publications Toggle American Journal of Sports Medicine Sports Health: A Multidisciplinary Approach Orthopaedic Journal ...

  4. Adjuvant and Salvage Radiation Therapy After Prostatectomy: American Society for Radiation Oncology/American Urological Association Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Valicenti, Richard K., E-mail: Richard.valicenti@ucdmc.ucdavis.edu [Department of Radiation Oncology, University of California, Davis School of Medicine, Davis, California (United States); Thompson, Ian [Department of Urology, University of Texas Health Science Center at San Antonio, San Antonio, Texas (United States); Albertsen, Peter [Division of Urology, University of Connecticut Health Center, Farmington, Connecticut (United States); Davis, Brian J. [Department of Radiation Oncology, Mayo Medical School, Rochester, Minnesota (United States); Goldenberg, S. Larry [Department of Urologic Sciences, University of British Columbia, Vancouver, British Columbia (Canada); Wolf, J. Stuart [Department of Urology, University of Michigan, Ann Arbor, Michigan (United States); Sartor, Oliver [Department of Medicine and Urology, Tulane Medical School, New Orleans, Louisiana (United States); Klein, Eric [Glickman Urological Kidney Institute, Cleveland Clinic, Cleveland, Ohio (United States); Hahn, Carol [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Roach, Mack [Department of Radiation Oncology, University of California, San Francisco, San Francisco, California (United States); Faraday, Martha M. [Four Oaks, Inc (United States)

    2013-08-01

    Purpose: The purpose of this guideline was to provide a clinical framework for the use of radiation therapy after radical prostatectomy as adjuvant or salvage therapy. Methods and Materials: A systematic literature review using PubMed, Embase, and Cochrane database was conducted to identify peer-reviewed publications relevant to the use of radiation therapy after prostatectomy. The review yielded 294 articles; these publications were used to create the evidence-based guideline statements. Additional guidance is provided as Clinical Principles when insufficient evidence existed. Results: Guideline statements are provided for patient counseling, use of radiation therapy in the adjuvant and salvage contexts, defining biochemical recurrence, and conducting a restaging evaluation. Conclusions: Physicians should offer adjuvant radiation therapy to patients with adverse pathologic findings at prostatectomy (ie, seminal vesicle invastion, positive surgical margins, extraprostatic extension) and salvage radiation therapy to patients with prostate-specific antigen (PSA) or local recurrence after prostatectomy in whom there is no evidence of distant metastatic disease. The offer of radiation therapy should be made in the context of a thoughtful discussion of possible short- and long-term side effects of radiation therapy as well as the potential benefits of preventing recurrence. The decision to administer radiation therapy should be made by the patient and the multidisciplinary treatment team with full consideration of the patient's history, values, preferences, quality of life, and functional status. The American Society for Radiation Oncology and American Urological Association websites show this guideline in its entirety, including the full literature review.

  5. Adjuvant and Salvage Radiation Therapy After Prostatectomy: American Society for Radiation Oncology/American Urological Association Guidelines

    International Nuclear Information System (INIS)

    Valicenti, Richard K.; Thompson, Ian; Albertsen, Peter; Davis, Brian J.; Goldenberg, S. Larry; Wolf, J. Stuart; Sartor, Oliver; Klein, Eric; Hahn, Carol; Michalski, Jeff; Roach, Mack; Faraday, Martha M.

    2013-01-01

    Purpose: The purpose of this guideline was to provide a clinical framework for the use of radiation therapy after radical prostatectomy as adjuvant or salvage therapy. Methods and Materials: A systematic literature review using PubMed, Embase, and Cochrane database was conducted to identify peer-reviewed publications relevant to the use of radiation therapy after prostatectomy. The review yielded 294 articles; these publications were used to create the evidence-based guideline statements. Additional guidance is provided as Clinical Principles when insufficient evidence existed. Results: Guideline statements are provided for patient counseling, use of radiation therapy in the adjuvant and salvage contexts, defining biochemical recurrence, and conducting a restaging evaluation. Conclusions: Physicians should offer adjuvant radiation therapy to patients with adverse pathologic findings at prostatectomy (ie, seminal vesicle invastion, positive surgical margins, extraprostatic extension) and salvage radiation therapy to patients with prostate-specific antigen (PSA) or local recurrence after prostatectomy in whom there is no evidence of distant metastatic disease. The offer of radiation therapy should be made in the context of a thoughtful discussion of possible short- and long-term side effects of radiation therapy as well as the potential benefits of preventing recurrence. The decision to administer radiation therapy should be made by the patient and the multidisciplinary treatment team with full consideration of the patient's history, values, preferences, quality of life, and functional status. The American Society for Radiation Oncology and American Urological Association websites show this guideline in its entirety, including the full literature review

  6. News Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

    Science.gov (United States)

    2011-05-01

    Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

  7. Autogenous shrinkage of Ducorit S5R ASTM C 1698-09 test method

    DEFF Research Database (Denmark)

    Damkilde, Lars

    The report deals with experimental measurement of autogenous shrinkage of Ducorit S5R according to the test method ASTM C 1698-09. This test method measures the bulk strain of a sealed cementitious specimen, at constant temperature and not subjected to external forces, from the time of final...

  8. Results of high-energy transurethral microwave thermotherapy in patients categorized according to the American Society of Anesthesiologists operative risk classification

    NARCIS (Netherlands)

    D'Ancona, F. C.; van der Bij, A. K.; Francisca, E. A.; Kho, H.; Debruyne, F. M.; Kiemeney, L. A.; de la Rosette, J. J.

    1999-01-01

    To evaluate the relation between the American Society of Anesthesiologists (ASA) classification and response to transurethral microwave thermotherapy (TUMT) in patients with lower urinary tract symptoms and benign prostatic hyperplasia (BPH). Two hundred forty-seven patients with symptomatic BPH

  9. Does gender bias influence awards given by societies?

    Science.gov (United States)

    Holmes, Mary Anne; Asher, Pranoti; Farrington, John; Fine, Rana; Leinen, Margaret S.; LeBoy, Phoebe

    2011-11-01

    AGU is a participant in a U.S. National Science Foundation (NSF)-funded project called Advancing Ways of Awarding Recognition in Disciplinary Societies (AWARDS), which seeks to examine whether gender bias affects selection of recipients of society awards. AGU is interested in learning why there is a higher proportion of female recipients of service and education awards over the past 2 decades. Combined with a lower rate of receipt of research awards, these results suggest that implicit (subconscious) bias in favor of male candidates still influences awardee selection. Six other professional societies (American Chemical Society, American Mathematical Society, American Society of Anesthesiologists, Mathematical Association of America, Society for Neuroscience, and Society for Industrial and Applied Mathematics) are participating in the project. Volunteers from each participant society attended an Association for Women in Science (AWIS)-sponsored workshop in May 2010 to examine data and review literature on best practices for fair selection of society awardees. A draft proposal for implementing these practices will be brought before the AGU Council and the Honors and Recognition Committee at their upcoming meetings.

  10. The American Society for Radiation Oncology's 2010 core physics curriculum for radiation oncology residents.

    Science.gov (United States)

    Xiao, Ying; Bernstein, Karen De Amorim; Chetty, Indrin J; Eifel, Patricia; Hughes, Lesley; Klein, Eric E; McDermott, Patrick; Prisciandaro, Joann; Paliwal, Bhudatt; Price, Robert A; Werner-Wasik, Maria; Palta, Jatinder R

    2011-11-15

    In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years. Copyright © 2011 Elsevier Inc. All rights reserved.

  11. Discipline behaviors of Chinese American and European American mothers.

    Science.gov (United States)

    Hulei, Elaine; Zevenbergen, Andrea A; Jacobs, Sue C

    2006-09-01

    In any society, parenting beliefs are a reflection of that society's cultural values and traditions (J. U. Ogbu, 1981). Verbosity, a parenting behavior considered dysfunctional in European American culture, may not be problematic in Chinese culture. The authors recruited 31 Chinese American and 30 European American mothers and used questionnaires to measure parenting behaviors and child behavior problems. The Chinese American mothers also completed a questionnaire assessing their acculturation level. The Chinese American mothers had higher levels of verbosity than did the European American mothers; however, there were no differences between the groups in child behavior problems. The results also revealed higher levels of laxness in the Chinese American mothers compared to the European American mothers. Acculturation level did not predict verbosity or laxness levels. Results suggest that the effectiveness of a parenting style should be defined relative to cultural context.

  12. 40 CFR 721.9005 - 2-Pyrrolidinone, 1,1′-(2-methyl-1,5-pentanediyl)bis-.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) TOXIC SUBSTANCES CONTROL ACT SIGNIFICANT NEW USES OF CHEMICAL SUBSTANCES Significant New Uses for...) centimeter (cm2) after 8 hours of testing in accordance with the most current version of the American Society... in accordance with the most current version of (ASTM) F1194 “Guide for Documenting the Results of...

  13. University papers in American Nuclear Society (ANS) transactions with enrollment and degrees-III

    International Nuclear Information System (INIS)

    Duffey, D.; Wiggins, P.F.

    1986-01-01

    Statistics on nuclear engineering course offerings, enrollment, degrees, and papers published in the American Nuclear Society (ANS) Transactions were presented in 1966 at a conference at the University of West Virginia and in several subsequent publications. Since the 1970s, enrollment and degree data have been compiled by the US Department of Energy and its predecessors. These are the latest statistics. Universities, with perhaps 300 professors of nuclear engineering, continue to contribute substantially to the Transactions. Identification of nuclear engineering at universities is suffering because of reduced enrollment and much less graduate research support. This and the foreign student situation deserve serious attention by those concerned with nuclear engineering in university, government, and industrial communities

  14. Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards

    Science.gov (United States)

    Alan Bendtsen; William L. Galligan

    1978-01-01

    The ASTM standards for establishing clear wood mechanical properties and for deriving structural grades and related allowable properties for visually graded lumber can be confusing and difficult for the uninitiated to interpret. This report provides a practical guide to using these standards for individuals not familiar with their application. Sample stress...

  15. Geotechnical characteristics of siliceous sediments from the Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Khadge, N.H.; Valsangkar, A.B.

    . East China, 2001, 10, 113–116. 13. Anon., www.agridata.gov.cn/bjdrc_web/ from/detail.aspx?p_iID=669&p_iModule ID=88&ColumnID=0&Authority=0, 2006, retrieved on 25 April 2007. 14. Flower Network, www.flower.ag365. com, 2007, retrieved on 25 April...., ASCE, 1984, 110, 539–543. 6. American Society for Testing and Mate- rials, Annual Book of ASTM Standards, 04.08 Soil and Rocks (I): D420–D4914, ASTM, Philadelphia, 1995, p. 981. 7. Bennett, R. H. and Lambert, D. N., Mar. Geol., 1971, 11, 201...

  16. The Politics of Identity: Re-Examining the Appetite for Affirmative Action Policies in Higher Education among African-Americans in a Post-Racial Society

    Science.gov (United States)

    White, Tarsha D.

    2014-01-01

    Broad inferences have been made that the election of a Black American President indicates that America now functions in a post-racist society. This optimism has fueled a major discussion for changes in American policies which directly affect minorities; in particular, those related to affirmative action in higher education are under attack. Due to…

  17. Comparing the Methodologies in ASTM G198 Using Combined Hygrothermal-Corrosion Modeling

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    ASTM G198, “Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood,” was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded fasteners in a...

  18. Slow-release granisetron (APF530) versus palonosetron for chemotherapy-induced nausea/vomiting: analysis by American Society of Clinical Oncology emetogenicity criteria.

    Science.gov (United States)

    Raftopoulos, Harry; Boccia, Ralph; Cooper, William; O'Boyle, Erin; Gralla, Richard J

    2015-09-01

    APF530 is a novel sustained-release formulation of granisetron. In a Phase III trial, APF530 500 mg was noninferior to palonosetron 0.25 mg in preventing acute chemotherapy-induced nausea and vomiting (CINV) after moderately (MEC) or highly emetogenic chemotherapy (HEC) and delayed CINV after MEC, but not superior in preventing delayed CINV after HEC. Emetogenicity was classified by Hesketh criteria; this reanalysis uses newer American Society of Clinical Oncology criteria. Complete responses (no emesis or rescue medication) after cycle one were reanalyzed after reclassification of MEC and HEC by American Society of Clinical Oncology criteria. APF530 maintained noninferiority to palonosetron. Single-dose APF530 is a promising alternative to palonosetron for preventing acute and delayed CINV after MEC or HEC. The Clinicaltrials.gov identifier for this study is NCT00343460.

  19. American Society of Clinical Oncology Policy Statement Update: Genetic and Genomic Testing for Cancer Susceptibility.

    Science.gov (United States)

    Robson, Mark E; Bradbury, Angela R; Arun, Banu; Domchek, Susan M; Ford, James M; Hampel, Heather L; Lipkin, Stephen M; Syngal, Sapna; Wollins, Dana S; Lindor, Noralane M

    2015-11-01

    The American Society of Clinical Oncology (ASCO) has long affirmed that the recognition and management of individuals with an inherited susceptibility to cancer are core elements of oncology care. ASCO released its first statement on genetic testing in 1996 and updated that statement in 2003 and 2010 in response to developments in the field. In 2014, the Cancer Prevention and Ethics Committees of ASCO commissioned another update to reflect the impact of advances in this area on oncology practice. In particular, there was an interest in addressing the opportunities and challenges arising from the application of massively parallel sequencing-also known as next-generation sequencing-to cancer susceptibility testing. This technology introduces a new level of complexity into the practice of cancer risk assessment and management, requiring renewed effort on the part of ASCO to ensure that those providing care to patients with cancer receive the necessary education to use this new technology in the most effective, beneficial manner. The purpose of this statement is to explore the challenges of new and emerging technologies in cancer genetics and provide recommendations to ensure their optimal deployment in oncology practice. Specifically, the statement makes recommendations in the following areas: germline implications of somatic mutation profiling, multigene panel testing for cancer susceptibility, quality assurance in genetic testing, education of oncology professionals, and access to cancer genetic services. © 2015 by American Society of Clinical Oncology.

  20. American Society for Radiation Oncology (ASTRO) and American College of Radiology (ACR) Practice Guideline for the Transperineal Permanent Brachytherapy of Prostate Cancer

    International Nuclear Information System (INIS)

    Rosenthal, Seth A.; Bittner, Nathan H.J.; Beyer, David C.; Demanes, D. Jeffrey; Goldsmith, Brian J.; Horwitz, Eric M.; Ibbott, Geoffrey S.; Lee, W. Robert; Nag, Subir; Suh, W. Warren; Potters, Louis

    2011-01-01

    Transperineal permanent prostate brachytherapy is a safe and efficacious treatment option for patients with organ-confined prostate cancer. Careful adherence to established brachytherapy standards has been shown to improve the likelihood of procedural success and reduce the incidence of treatment-related morbidity. A collaborative effort of the American College of Radiology (ACR) and American Society for Therapeutic Radiation Oncology (ASTRO) has produced a practice guideline for permanent prostate brachytherapy. The guideline defines the qualifications and responsibilities of all the involved personnel, including the radiation oncologist, physicist and dosimetrist. Factors with respect to patient selection and appropriate use of supplemental treatment modalities such as external beam radiation and androgen suppression therapy are discussed. Logistics with respect to the brachtherapy implant procedure, the importance of dosimetric parameters, and attention to radiation safety procedures and documentation are presented. Adherence to these practice guidelines can be part of ensuring quality and safety in a successful prostate brachytherapy program.

  1. European Respiratory Society statement

    DEFF Research Database (Denmark)

    Miravitlles, Marc; Dirksen, Asger; Ferrarotti, Ilaria

    2017-01-01

    lung disease. A large proportion of individuals affected remain undiagnosed and therefore without access to appropriate care and treatment.The most recent international statement on AATD was published by the American Thoracic Society and the European Respiratory Society in 2003. Since then there has...

  2. American Chemical Society Student Affiliates Chapters: More Than Just Chemistry Clubs

    Science.gov (United States)

    Montes, Ingrid; Collazo, Carmen

    2003-10-01

    Chemistry educators often examine and implement various instructional techniques, such as mentoring programs, to advance learning objectives and to equip students with analytical and technical skills, as well as the skills required of chemical science professionals. Student organizations, such as an American Chemical Society Student Affiliates (SA) chapter, can create a learning environment for undergraduates by engaging them in activities that develop communication, teamwork and inquiry, analysis, and problem-solving skills within a real-world setting. The environment is student-based, has personal meaning for the learner, emphasizes a process-and-product orientation, and emphasizes evaluation. Participation in SAs enhance the traditional chemistry curriculum, complementing the learning goals and meeting learning objectives that might not otherwise be addressed in the curriculum. In this article we discuss how SA chapters enhance the educational experience of undergraduate chemical science students, help develop new chemistry professionals, and shape enthusiastic and committed future chemical science leaders.

  3. Comparing the Methodologies in ASTM G198: Is There an Easy Way Out?

    Science.gov (United States)

    Samuel L. Zelinka

    2013-01-01

    ASTM(1) G198, Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood, was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded...

  4. Pain: metaphor, body, and culture in Anglo-American societies between the eighteenth and twentieth centuries.

    Science.gov (United States)

    Bourke, Joanna

    2014-10-02

    This article explores the relationship between metaphorical languages, body, and culture, and suggests that such an analysis can reveal a great deal about the meaning and experience of pain in Anglo-American societies between the eighteenth and twentieth centuries. It uses concepts within embodied cognition to speculate on how historians can write a history of sensation. Bodies are actively engaged in the linguistic processes and social interactions that constitute painful sensations. Language is engaged in a dialogue with physiological bodies and social environments. And culture collaborates in the creation of physiological bodies and metaphorical systems.

  5. Problems of Journalism; Proceedings of the 1975 Annual Convention of the American Society of Newspaper Editors (Washington, D.C., April 16-18, 1975).

    Science.gov (United States)

    American Society of Newspaper Editors, Easton, PA.

    This document reports the 1975 proceedings of the American Society of Newspaper Editors (ASNE) convention held in Washington, D.C., April 16-18. The contents include a list of officers and directors, past presidents of the society, and a copy of the ASNE Code of Ethics. Also contained in the document are reports on such individual sessions as…

  6. Laboratory compliance with the American Society of Clinical Oncology/college of American Pathologists guidelines for human epidermal growth factor receptor 2 testing: a College of American Pathologists survey of 757 laboratories.

    Science.gov (United States)

    Nakhleh, Raouf E; Grimm, Erin E; Idowu, Michael O; Souers, Rhona J; Fitzgibbons, Patrick L

    2010-05-01

    To ensure quality human epidermal growth receptor 2 (HER2) testing in breast cancer, the American Society of Clinical Oncology/College of American Pathologists guidelines were introduced with expected compliance by 2008. To assess the effect these guidelines have had on pathology laboratories and their ability to address key components. In late 2008, a survey was distributed with the HER2 immunohistochemistry (IHC) proficiency testing program. It included questions regarding pathology practice characteristics and assay validation using fluorescence in situ hybridization or another IHC laboratory assay and assessed pathologist HER2 scoring competency. Of the 907 surveys sent, 757 (83.5%) were returned. The median laboratory accessioned 15 000 cases and performed 190 HER2 tests annually. Quantitative computer image analysis was used by 33% of laboratories. In-house fluorescence in situ hybridization was performed in 23% of laboratories, and 60% of laboratories addressed the 6- to 48-hour tissue fixation requirement by embedding tissue on the weekend. HER2 testing was performed on the initial biopsy in 40%, on the resection specimen in 6%, and on either in 56% of laboratories. Testing was validated with only fluorescence in situ hybridization in 47% of laboratories, whereas 10% of laboratories used another IHC assay only; 13% used both assays, and 12% and 15% of laboratories had not validated their assays or chose "not applicable" on the survey question, respectively. The 90% concordance rate with fluorescence in situ hybridization results was achieved by 88% of laboratories for IHC-negative findings and by 81% of laboratories for IHC-positive cases. The 90% concordance rate for laboratories using another IHC assay was achieved by 80% for negative findings and 75% for positive cases. About 91% of laboratories had a pathologist competency assessment program. This survey demonstrates the extent and characteristics of HER2 testing. Although some American Society of

  7. The Aging of lignin rich papers upon exposure to light : its quantification and prediction

    Science.gov (United States)

    James S. Bond; Rajai H. Atalla; Agarwal Umesh P.; Chris G. Hunt

    1999-01-01

    A program was undertaken at the Forest Products Laboratory in conjunction with the American Society for Testing and Materials (ASTM) to develop guidelines for a credible accelerated photoaging protocol for printing and writing papers. In support of this, indepth studies of photodegredation were undertaken in sufficient detail to establish the validity of the protocol....

  8. Standard specification for tantalum and tantalum alloy plate, sheet, and strip. ASTM standard

    International Nuclear Information System (INIS)

    1998-09-01

    This specification is under the jurisdiction of ASTM Committee B-10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee B10.03 on Niobium and Tantalum. Current edition approved May 10, 1998 and published September 1998. Originally published as B 708-82. Last previous edition was B 708-92

  9. Choosing wisely in headache medicine: the American Headache Society's list of five things physicians and patients should question.

    Science.gov (United States)

    Loder, Elizabeth; Weizenbaum, Emma; Frishberg, Benjamin; Silberstein, Stephen

    2013-01-01

    In an effort to draw attention to tests and procedures associated with low-value care in headache medicine, the American Headache Society (AHS) joined the Choosing Wisely initiative of the American Board of Internal Medicine Foundation. The AHS president appointed an ad hoc "Choosing Wisely" task force of the AHS. The committee surveyed AHS members to develop a candidate list of items for the AHS "Top 5" list of low-value care in headache medicine. Through a process of literature review and consensus, the final list of five items was chosen. Draft recommendations went through several rounds of revision and a process of outside review. The AHS Board of Directors approved the final list of "Five Things." The five recommendations approved by the AHS Board of Directors are: (1) don't perform neuroimaging studies in patients with stable headaches that meet criteria for migraine; (2) don't perform computed tomography imaging for headache when magnetic resonance imaging is available, except in emergency settings; (3) don't recommend surgical deactivation of migraine trigger points outside of a clinical trial; (4) don't prescribe opioid- or butalbital-containing medications as a first-line treatment for recurrent headache disorders; and (5) don't recommend prolonged or frequent use of over-the-counter pain medications for headache. We recommend that headache medicine specialists and other physicians who evaluate and treat headache disorders should use this list when discussing care with patients. © 2013 American Headache Society.

  10. Achieving Speaker Gender Equity at the American Society for Microbiology General Meeting.

    Science.gov (United States)

    Casadevall, Arturo

    2015-08-04

    In 2015, the American Society for Microbiology (ASM) General Meeting essentially achieved gender equity, with 48.5% of the oral presentations being given by women. The mechanisms associated with increased female participation were (i) making the Program Committee aware of gender statistics, (ii) increasing female representation among session convener teams, and (iii) direct instruction to try to avoid all-male sessions. The experience with the ASM General Meeting shows that it is possible to increase the participation of female speakers in a relatively short time and suggests concrete steps that may be taken to achieve this at other meetings. Public speaking is very important for academic advancement in science. Historically women have been underrepresented as speakers in many scientific meetings. This article describes concrete steps that were associated with achieving gender equity at a major meeting. Copyright © 2015 Casadevall.

  11. Preschool Multiple-Breath Washout Testing. An Official American Thoracic Society Technical Statement.

    Science.gov (United States)

    Robinson, Paul D; Latzin, Philipp; Ramsey, Kathryn A; Stanojevic, Sanja; Aurora, Paul; Davis, Stephanie D; Gappa, Monika; Hall, Graham L; Horsley, Alex; Jensen, Renee; Lum, Sooky; Milla, Carlos; Nielsen, Kim G; Pittman, Jessica E; Rosenfeld, Margaret; Singer, Florian; Subbarao, Padmaja; Gustafsson, Per M; Ratjen, Felix

    2018-03-01

    Obstructive airway disease is nonuniformly distributed throughout the bronchial tree, although the extent to which this occurs can vary among conditions. The multiple-breath washout (MBW) test offers important insights into pediatric lung disease, not available through spirometry or resistance measurements. The European Respiratory Society/American Thoracic Society inert gas washout consensus statement led to the emergence of validated commercial equipment for the age group 6 years and above; specific recommendations for preschool children were beyond the scope of the document. Subsequently, the focus has shifted to MBW applications within preschool subjects (aged 2-6 yr), where a "window of opportunity" exists for early diagnosis of obstructive lung disease and intervention. This preschool-specific technical standards document was developed by an international group of experts, with expertise in both custom-built and commercial MBW equipment. A comprehensive review of published evidence was performed. Recommendations were devised across areas that place specific age-related demands on MBW systems. Citing evidence where available in the literature, recommendations are made regarding procedures that should be used to achieve robust MBW results in the preschool age range. The present work also highlights the important unanswered questions that need to be addressed in future work. Consensus recommendations are outlined to direct interested groups of manufacturers, researchers, and clinicians in preschool device design, test performance, and data analysis for the MBW technique.

  12. Insurrections, Bank and Private Contracts: How Society shaped the Constitutional Order during the American Revolution

    Directory of Open Access Journals (Sweden)

    Matteo Battistini

    2014-12-01

    Full Text Available Looking at the revolutionary context of Pennsylvania, the essay analyzes the continuous movement of rebellions during the American Revolution in order to highlight the process of institutionalization of the constitutional order, namely the changeable power relationship that shaped society. The essay reconstructs: 1 the battle for free trade and freedom of property and the resulting rising of the mercantile class as a national elite; 2 the mercantile political project of ordering society by creating a national system of public credit based upon the institution of the public debt and the foundation of the first national bank; 3 the vicissitudes of the bank by analyzing Dissertations of Government, the Affairs of the Bank and Paper Money (1786, one of the most underrated pamphlets of Thomas Paine. By this way, the essay shows how the principle of popular sovereignty and the language of rebellion were intended to be institutionalized as part of the constitutional order that was formalized in 1787-88.

  13. The definition of chronic lung disease in patients undergoing cardiac surgery: a comparison between the Society of Thoracic Surgeons and the American Thoracic Society/European Respiratory Society Classifications.

    Science.gov (United States)

    Henry, L; Holmes, S D; Lamberti, J; Halpin, L; Hunt, S; Ad, N

    2012-12-01

    Early and late outcomes following cardiac surgery may be adversely affected in patients with chronic lung disease (CLD) and the presence of CLD is definition dependent. The purpose of this study was to compare the Society of Thoracic Surgeons (STS) definitions for CLD to the modified American Thoracic Society (ATS)/European Respiratory Society (ERS) definitions in diagnosing and classifying CLD among a cohort of cardiac surgery patients. A prospectively-designed study whereby high risk patients for CLD presenting for non-emergent cardiac surgery and had a history of asthma, a 10 or more pack year history of smoking or a persistent cough were included. All patients underwent spirometry testing within two weeks of surgery. The presence and severity of CLD was coded two times: 1) STS definitions with spirometry; 2) ATS/ERS guidelines. The rate of misclassification was determined using concordance and discordance rates. Sensitivity analysis of the STS spirometry definitions was calculated against the ATS/ERS definitions and respective classifications. The discordant rate for the STS spirometry driven definitions versus the ATS/ERS definitions was 21%. Forty patients (21%) classified as no CLD by the STS spirometry definition were found to have CLD by the ATS/ERS definition. The STS classification had 68% sensitivity (84/124) when identifying any CLD and only 26% sensitivity (14/54) when identifying moderate CLD. The current STS spirometry driven definitions for CLD did not perform as well as the ATS/ERS definitions in diagnosing and classifying the degree of CLD. Consideration should be given to using the ATS/ERS definitions.

  14. Effects of Tempering Temperature and Path on the Microstructural and Mechanical Properties of ASTM Gr.92 Steel

    International Nuclear Information System (INIS)

    Han, C. H.; Baek, J. H.; Kim, S. H.; Lee, C. B.; Kim, Y. K.; Hong, S. I.

    2009-01-01

    SFR (Sodium-Cooled Fast Reactor) is one of the prospective nuclear reactor for the next generation (Gen-IV) systems. The fuel claddings in the SFR are subject to a high fast nuclear irradiation and a high temperature. Fuel technology is a key aspect of an SFR system, with implications for reactor safety, reactor operations, fuel reprocessing technology, and overall system economics. ASTM Gr.92 steel has been considered as the one of the main candidate fuel cladding materials in the design of SFR in that it has higher thermal conductivity as well as dimensional stability under irradiation when compared as austenitic stainless steel. The changes in microstructure and heat-treatment varying M 23 C 6 , MX, M 2 X, and precipitation by ASTM Gr.92 steels to improve high temperature mechanical properties is the attention. According to several researchers, it plays an important role in the mechanical properties of precipitates V, Nb, Cr, C, N as a form of MX and M 2 X precipitates. These fine precipitates formed in the sub- grain by preventing the movement of dislocations in high-temperature mechanical properties will contribute effectively. This study investigated the effects of tempering temperature and heat-treatment path on microstructure and mechanical properties of ASTM Gr.92 steels

  15. Commentary on factors affecting transverse vibration using an idealized theoretical equation

    Science.gov (United States)

    Joseph F. Murphy

    2000-01-01

    An idealized theoretical equation to calculate flexural stiffness using transverse vibration of a simply end-supported beam is being considered by the American Society of Testing and Materials (ASTM) Wood Committee D07 to determine lumber modulus of elasticity. This commentary provides the user a quantitative view of six factors that affect the accuracy of using the...

  16. Participation of women in neurochemistry societies.

    Science.gov (United States)

    Lees, Marjorie B

    2002-11-01

    Women have made important scientific contributions to the field of neurochemistry, and they have also been leaders in neurochemical societies throughout the world. Here I discuss women's involvement and leadership in six neurochemistry societies: American Society for Neurochemistry, Argentine Society for Neurochemistry, International Society for Neurochemistry, European Society for Neurochemistry, Japanese Society for Neurochemistry, and Asian-Pacific Society for Neurochemistry. The number of women who have been active in these societies and the level of their activity vary considerably. Neurochemical societies in the Western hemisphere, i.e., the American and the Argentine Society for Neurochemistry, have much greater numbers of women who have held office, been on council, or engaged in other leadership activities than in the rest of the world. The limited participation of women in the Japanese Neurochemistry Society relates to Japanese cultural views and was not unexpected. However, the relatively few women leaders in the International Society for Neurochemistry was a surprise. The European Society had a somewhat better record of female participation than did the International Society. The reasons for these differences are partly cultural, but factors related to when each society was formed, how it is organized, and how elections are structured undoubtedly play a role. Further analysis of these observations would be of interest from a sociological and a women's studies point of view.

  17. A new method to determine J0-integral values (ASTM E 813) without any auxiliary equipment

    International Nuclear Information System (INIS)

    Ullrich, G.; Krompholz, K.

    1987-01-01

    In this contribution the path independent J-integral according to J.R. Rice, respective J.D. Landes and J.A. Begley due to ASTME 813 is calculated by the product J pl = d v J el for 3 point bend type specimen. Here d v is the load point displacement up to the point of the onset of stable crack growth V, which is taken from the load versus load point displacement diagram and J el a value which is equivalent to K 2 /E, where K is the stress intensity factor (ASTME 399) and E is Young's modulus. The advantage of the new procedure is the simplicity of the test arrangement and of the evaluation with the determination of initiation point V without computer or other auxiliary equipment. (orig.) [de

  18. ASTM STANDARD GUIDE FOR EVALUATING DISPOSAL OPTIONS FOR REUSE OF CONCRETE FROM NUCLEAR FACILITY DECOMMISSIONING

    International Nuclear Information System (INIS)

    Phillips, Ann Marie; Meservey, Richard H.

    2003-01-01

    Within the nuclear industry, many contaminated facilities that require decommissioning contain huge volumes of concrete. This concrete is generally disposed of as low-level waste at a high cost. Much of the concrete is lightly contaminated and could be reused as roadbed, fill material, or aggregate for new concrete, thus saving millions of dollars. However, because of the possibility of volumetric contamination and the lack of a method to evaluate the risks and costs of reusing concrete, reuse is rarely considered. To address this problem, Argonne National Laboratory-East (ANL-E) and the Idaho National Engineering and Environmental Laboratory teamed to write a ''concrete protocol'' to help evaluate the ramifications of reusing concrete within the U.S. Department of Energy (DOE). This document, titled the Protocol for Development of Authorized Release Limits for Concrete at U.S. Department of Energy Site (1) is based on ANL-E's previously developed scrap metal recycle protocols; on the 10-step method outlined in DOE's draft handbook, Controlling Release for Reuse or Recycle of Property Containing Residual Radioactive Material (2); and on DOE Order 4500.5, Radiation Protection of the Public and the Environment (3). The DOE concrete protocol was the basis for the ASTM Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning, which was written to make the information available to a wider audience outside DOE. The resulting ASTM Standard Guide is a more concise version that can be used by the nuclear industry worldwide to evaluate the risks and costs of reusing concrete from nuclear facility decommissioning. The bulk of the ASTM Standard Guide focuses on evaluating the dose and cost for each disposal option. The user calculates these from the detailed formulas and tabulated data provided, then compares the dose and cost for each disposal option to select the best option that meets regulatory requirements. With this information

  19. Validation of a prediction model that allows direct comparison of the Oxford Knee Score and American Knee Society clinical rating system.

    Science.gov (United States)

    Maempel, J F; Clement, N D; Brenkel, I J; Walmsley, P J

    2015-04-01

    This study demonstrates a significant correlation between the American Knee Society (AKS) Clinical Rating System and the Oxford Knee Score (OKS) and provides a validated prediction tool to estimate score conversion. A total of 1022 patients were prospectively clinically assessed five years after TKR and completed AKS assessments and an OKS questionnaire. Multivariate regression analysis demonstrated significant correlations between OKS and the AKS knee and function scores but a stronger correlation (r = 0.68, p Society of Bone & Joint Surgery.

  20. American Brachytherapy Society consensus report for accelerated partial breast irradiation using interstitial multicatheter brachytherapy.

    Science.gov (United States)

    Hepel, Jaroslaw T; Arthur, Douglas; Shaitelman, Simona; Polgár, Csaba; Todor, Dorin; Zoberi, Imran; Kamrava, Mitchell; Major, Tibor; Yashar, Catheryn; Wazer, David E

    To develop a consensus report for the quality practice of accelerated partial breast irradiation (APBI) using interstitial multicatheter brachytherapy (IMB). The American Brachytherapy Society Board appointed an expert panel with clinical and research experience with breast brachytherapy to provide guidance for the current practice of IMB. This report is based on a comprehensive literature review with emphasis on randomized data and expertise of the panel. Randomized trials have demonstrated equivalent efficacy of APBI using IMB compared with whole breast irradiation for select patients with early-stage breast cancer. Several techniques for placement of interstitial catheters are described, and importance of three-dimensional planning with appropriate optimization is reviewed. Optimal target definition is outlined. Commonly used dosing schemas include 50 Gy delivered in pulses of 0.6-0.8 Gy/h using pulsed-dose-rate technique and 34 Gy in 10 fractions, 32 Gy in eight fractions, or 30 Gy in seven fractions using high-dose-rate technique. Potential toxicities and strategies for toxicity avoidance are described in detail. Dosimetric constraints include limiting whole breast volume that receives ≥50% of prescription dose to 0.75 (>0.85 preferred), V 150  < 45 cc, and V 200  < 14 cc. Using an optimal implant technique coupled with optimal planning and appropriate dose constraints, a low rate of toxicity and a good-to-excellent cosmetic outcome of ≥90% is expected. IMB is an effective technique to deliver APBI for appropriately selected women with early-stage breast cancer. This consensus report has been created to assist clinicians in the appropriate practice of APBI using IMB. Copyright © 2017 American Brachytherapy Society. Published by Elsevier Inc. All rights reserved.

  1. The American Society for Radiation Oncology’s 2010 Core Physics Curriculum for Radiation Oncology Residents

    International Nuclear Information System (INIS)

    Xiao Ying; De Amorim Bernstein, Karen; Chetty, Indrin J.; Eifel, Patricia; Hughes, Lesley; Klein, Eric E.; McDermott, Patrick; Prisciandaro, Joann; Paliwal, Bhudatt; Price, Robert A.; Werner-Wasik, Maria; Palta, Jatinder R.

    2011-01-01

    Purpose: In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Methods and Materials: Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. Results: The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. Conclusions: The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years.

  2. Results of ASTM round robin testing for mode 1 interlaminar fracture toughness of composite materials

    Science.gov (United States)

    Obrien, T. Kevin; Martin, Roderick H.

    1992-01-01

    The results are summarized of several interlaboratory 'round robin' test programs for measuring the mode 1 interlaminar fracture toughness of advanced fiber reinforced composite materials. Double Cantilever Beam (DCB) tests were conducted by participants in ASTM committee D30 on High Modulus Fibers and their Composites and by representatives of the European Group on Fracture (EGF) and the Japanese Industrial Standards Group (JIS). DCB tests were performed on three AS4 carbon fiber reinforced composite materials: AS4/3501-6 with a brittle epoxy matrix; AS4/BP907 with a tough epoxy matrix; and AS4/PEEK with a tough thermoplastic matrix. Difficulties encountered in manufacturing panels, as well as conducting the tests are discussed. Critical issues that developed during the course of the testing are highlighted. Results of the round robin testing used to determine the precision of the ASTM DCB test standard are summarized.

  3. Primary Prevention of Cervical Cancer: American Society of Clinical Oncology Resource-Stratified Guideline

    Directory of Open Access Journals (Sweden)

    Silvina Arrossi

    2017-10-01

    Full Text Available Purpose: To provide resource-stratified (four tiers, evidence-based recommendations on the primary prevention of cervical cancer globally. Methods: The American Society of Clinical Oncology convened a multidisciplinary, multinational panel of oncology, obstetrics/gynecology, public health, cancer control, epidemiology/biostatistics, health economics, behavioral/implementation science, and patient advocacy experts. The Expert Panel reviewed existing guidelines and conducted a modified ADAPTE process and a formal consensus-based process with additional experts (consensus ratings group for one round of formal ratings. Results: Existing sets of guidelines from five guideline developers were identified and reviewed; adapted recommendations formed the evidence base. Five systematic reviews, along with cost-effectiveness analyses, provided evidence to inform the formal consensus process, which resulted in agreement of ≥ 75%. Recommendations: In all resource settings, two doses of human papillomavirus vaccine are recommended for girls age 9 to 14 years, with an interval of at least 6 months and possibly up to 12 to 15 months. Individuals with HIV positivity should receive three doses. Maximal and enhanced settings: if girls are age ≥ 15 years and received their first dose before age 15 years, they may complete the series; if no doses were received before age 15 years, three doses should be administered; in both scenarios, vaccination may be through age 26 years. Limited and basic settings: if sufficient resources remain after vaccinating girls age 9 to 14 years, girls who received one dose may receive additional doses between age 15 and 26 years. Maximal, enhanced, and limited settings: if ≥ 50% coverage in the priority female target population, sufficient resources, and cost effectiveness, boys may be vaccinated to prevent other noncervical human papillomavirus–related cancers and diseases. Basic settings: vaccinating boys is not recommended

  4. Primary Prevention of Cervical Cancer: American Society of Clinical Oncology Resource-Stratified Guideline.

    Science.gov (United States)

    Arrossi, Silvina; Temin, Sarah; Garland, Suzanne; Eckert, Linda O'Neal; Bhatla, Neerja; Castellsagué, Xavier; Alkaff, Sharifa Ezat; Felder, Tamika; Hammouda, Doudja; Konno, Ryo; Lopes, Gilberto; Mugisha, Emmanuel; Murillo, Rául; Scarinci, Isabel C; Stanley, Margaret; Tsu, Vivien; Wheeler, Cosette M; Adewole, Isaac Folorunso; de Sanjosé, Silvia

    2017-10-01

    To provide resource-stratified (four tiers), evidence-based recommendations on the primary prevention of cervical cancer globally. The American Society of Clinical Oncology convened a multidisciplinary, multinational panel of oncology, obstetrics/gynecology, public health, cancer control, epidemiology/biostatistics, health economics, behavioral/implementation science, and patient advocacy experts. The Expert Panel reviewed existing guidelines and conducted a modified ADAPTE process and a formal consensus-based process with additional experts (consensus ratings group) for one round of formal ratings. Existing sets of guidelines from five guideline developers were identified and reviewed; adapted recommendations formed the evidence base. Five systematic reviews, along with cost-effectiveness analyses, provided evidence to inform the formal consensus process, which resulted in agreement of ≥ 75%. In all resource settings, two doses of human papillomavirus vaccine are recommended for girls age 9 to 14 years, with an interval of at least 6 months and possibly up to 12 to 15 months. Individuals with HIV positivity should receive three doses. Maximal and enhanced settings: if girls are age ≥ 15 years and received their first dose before age 15 years, they may complete the series; if no doses were received before age 15 years, three doses should be administered; in both scenarios, vaccination may be through age 26 years. Limited and basic settings: if sufficient resources remain after vaccinating girls age 9 to 14 years, girls who received one dose may receive additional doses between age 15 and 26 years. Maximal, enhanced, and limited settings: if ≥ 50% coverage in the priority female target population, sufficient resources, and cost effectiveness, boys may be vaccinated to prevent other noncervical human papillomavirus-related cancers and diseases. Basic settings: vaccinating boys is not recommended. It is the view of the American Society of Clinical Oncology that

  5. An Evaluation of a Proposed Revision of the ASTM D 1990 Grouping Procedure

    Science.gov (United States)

    Steve P Verrill; James W. Evans; David E. Kretschmann; Cherilyn A. Hatfield

    2013-01-01

    Lum, Taylor, and Zidek have proposed a revised procedure for wood species grouping in ASTM standard D 1990. We applaud the authors’ recognition of the importance of considering a strength distribution’s variability as well as its fifth percentile. However, we have concerns about their proposed method of incorporating this information into a standard. We detail these...

  6. Genitourinary syndrome of menopause: new terminology for vulvovaginal atrophy from the International Society for the Study of Women's Sexual Health and the North American Menopause Society.

    Science.gov (United States)

    Portman, David J; Gass, Margery L S

    2014-10-01

    In 2012, the Board of Directors of the International Society for the Study of Women's Sexual Health (ISSWSH) and the Board of Trustees of The North American Menopause Society (NAMS) acknowledged the need to review current terminology associated with genitourinary tract symptoms related to menopause. The 2 societies cosponsored a terminology consensus conference, which was held in May 2013. Members of the consensus conference agreed that the term genitourinary syndrome of menopause (GSM) is a medically more accurate, all-encompassing, and publicly acceptable term than vulvovaginal atrophy. GSM is defined as a collection of symptoms and signs associated with a decrease in estrogen and other sex steroids involving changes to the labia majora/minora, clitoris, vestibule/introitus, vagina, urethra and bladder. The syndrome may include but is not limited to genital symptoms of dryness, burning, and irritation; sexual symptoms of lack of lubrication, discomfort or pain, and impaired function; and urinary symptoms of urgency, dysuria and recurrent urinary tract infections. Women may present with some or all of the signs and symptoms, which must be bothersome and should not be better accounted for by another diagnosis. The term was presented and discussed at the annual meeting of each society. The respective Boards of NAMS and ISSWSH formally endorsed the new terminology--genitourinary syndrome of menopause (GSM)--in 2014.

  7. Biocompatibility of metal injection molded versus wrought ASTM F562 (MP35N) and ASTM F1537 (CCM) cobalt alloys.

    Science.gov (United States)

    Chen, Hao; Sago, Alan; West, Shari; Farina, Jeff; Eckert, John; Broadley, Mark

    2011-01-01

    We present a comparative analysis between biocompatibility test results of wrought and Metal Injection Molded (MIM) ASTM F562-02 UNS R30035 (MP35N) and F1537 UNS R31538 (CCM) alloy samples that have undergone the same generic orthopedic implant's mechanical, chemical surface pre-treatment, and a designed pre-testing sample preparation method. Because the biocompatibility properties resulting from this new MIM cobalt alloy process are not well understood, we conducted tests to evaluate cytotoxicity (in vitro), hemolysis (in vitro), toxicity effects (in vivo), tissue irritation level (in vivo), and pyrogenicity count (in vitro) on such samples. We show that our developed MIM MP35N and CCM materials and treatment processes are biocompatible, and that both the MIM and wrought samples, although somewhat different in microstructure and surface, do not show significant differences in biocompatibility.

  8. The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

    OpenAIRE

    Mohammed Sabbar Abdulbaqi

    2017-01-01

    Saul Bellow (1915 –2005) is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976). He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956) in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand an...

  9. Standards in capstone design courses and the engineering curriculum.

    Science.gov (United States)

    Goldberg, Jay

    2012-01-01

    In 1990, I was the group leader of Research and Development for Surgitek, a urological device manufacturer in Racine, Wisconsin, which was the market leader in ureteral stents. I recognized the need for an industry standard for ureteral stents, felt that taking a leadership role in the development of a new standard would be a good professional development activity, and volunteered to serve as the chair of the American Society for Testing and Materials (ASTM, now known as ASTM International) Task Group on Ureteral Stents. After several years, the standard was approved, and I continue to serve as the chair of the ASTM Subcommittee on Urological Materials and Devices. This experience helped me understand the value of industry standards, expanded my professional network and visibility within the medical device industry, and helped develop my leadership skills.

  10. 2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

    Science.gov (United States)

    Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

    2016-12-01

    Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

  11. Application of MCDM based hybrid optimization tool during turning of ASTM A588

    Directory of Open Access Journals (Sweden)

    Himadri Majumder

    2017-07-01

    Full Text Available Multi-criteria decision making approach is one of the most troublesome tools for solving the tangled optimization problems in the machining area due to its capability of solving the complex optimization problems in the production process. Turning is widely used in the manufacturing processes as it offers enormous advantages like good quality product, customer satisfaction, economical and relatively easy to apply. A contemporary approach, MOORA coupled with PCA, was used to ascertain an optimal combination of input parameters (spindle speed, depth of cut and feed rate for the given output parameters (power consumption, average surface roughness and frequency of tool vibration using L27 orthogonal array for turning on ASTM A588 mild steel. Comparison between MOORA-PCA and TOPSIS-PCA shows the effectiveness of MOORA over TOPSIS method. The optimum parameter combination for multi-performance characteristics has been established for ASTM A588 mild steel are spindle speed 160 rpm, depth of cut 0.1 mm and feed rate 0.08 mm/rev. Therefore, this study focuses on the application of the hybrid MCDM approach as a vital selection making tool to deal with multi objective optimization problems.

  12. The American University of Beirut

    DEFF Research Database (Denmark)

    Bertelsen, Rasmus Gjedssø

    2016-01-01

    with American society through its board of trustees. American civil society has been a major financial partner since the missionary days to modern day foundation philanthropy. American business has supported the university and recruited its graduates. American government has supported the university financially...... and politically. The chapter compares the transnational relations of the AUB, the other classical American overseas universities with missionary roots in the Middle East (AUC and LAU), the more than 20 American higher education institutions founded in China around 1900 (which did not survive the Korean War...

  13. MÉTODOS PARA CARACTERIZAR COMBUSTIBLES LÍQUIDOS Y GASEOSOS OBTENIDOS DE LLANTAS EN DESUSO A TRAVÉS DE LAS NORMAS ASTM.

    Directory of Open Access Journals (Sweden)

    JAIME ALEJANDRO OSPINA

    2011-12-01

    Full Text Available Este artículo muestra la importancia de la caracterización de la energía de combustibles líquidos y gaseosos obtenidos del conocido tratamiento térmico de pirolisis a través de un microondas. La caracterización de estos combustibles tomará en cuenta los estándares técnicos tales como ASTM D3452 – 93 para la cromatografía de gases (GC, ASTM D2549 para cromatografía de gas/ espectrometría de masa (GC/MS y ASTM D6370 -99 para termogravimetría en el análisis de la composición de llantas.También muestra que estos combustibles y gases de pirolisis tiene una alta valor calorífico de 42 MJ / Kg y un contenido de azufre entre 0.8 y 1.65 Wt%, dependiendo en el tipo de llanta y las condiciones del proceso.

  14. NASA/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1985. [Space Stations and Their Environments

    Science.gov (United States)

    Chilton, R. G. (Editor); Williams, C. E. (Editor)

    1986-01-01

    The 1985 NASA/ASEE Summer Faculty Fellowship Research Program was conducted by Texas A&M University and the Johnson Space Center. The ten week program was operated under the auspices of the American Society for Engineering Education (ASEE). The faculty fellows spent the time at JSC engaged in research projects commensurate with their interests and background and worked in collaboration with NASA/JSC colleagues. This document is a compilation of the final reports of their research during the summer of 1985.

  15. Recognition of American Physiological Society members whose research publications had a significant impact on the discipline of physiology.

    Science.gov (United States)

    Tipton, Charles M

    2013-03-01

    Society members whose research publication during the past 125 yr had an important impact on the discipline of physiology were featured at the American Physiological Society (APS)'s 125th Anniversary symposium. The daunting and challenging task of identifying and selecting significant publications was assumed by the Steering Committee of the History of Physiology Interest Group, who requested recommendations and rationales from all Sections, select Interest Groups, and active senior APS members. The request resulted in recommendations and rationales from nine Sections, one Interest Group, and 28 senior members, identifying 38 publications and 43 members for recognition purposes. The publication recommendations included 5 individuals (Cournand, Erlanger, Gasser, Hubel, and Wiesel) whose research significantly contributed to their selection for the Nobel Prize in Medicine or Physiology, 4 individuals who received multiple recommendations [i.e., Cannon (3), Curran (2), Fenn (3), and Hamilton (2)], and 11 members who had been APS Presidents. Of the recommended articles, 33% were from the American Journal of Physiology, with the earliest being published in 1898 (Cannon) and the latest in 2007 (Sigmund). For the brief oral presentations, the History of Physiology Steering Committee selected the first choices of the Sections or Interest Group, whereas rationales and representation of the membership were used for the presentations by senior members.

  16. Comparative Study of API 5L X60 and ASTM 572 Gr50 Steel Exposed to Crude Oil and Seawater

    Directory of Open Access Journals (Sweden)

    Marcy Viviana Chiquillo Márquez

    2018-04-01

    Full Text Available In the petroleum industry, the biphasic conditions in storage and separation tanks allow that the material to remain exposed to two different environments, causing its deterioration. In this article, an evaluation is made of the corrosive behavior and Vickers microhardness (HV of two high strength low alloy (HSLA steels and how their surfaces are characterized. The ASTM 572 Gr50 steel showed a lower corrosion rate in all systems after being immersed for 720 and 1440 hours. Characterizing the surface by means of Scanning Electron Microscopy (SEM showed uniform and localized corrosion for the both steels, and revealed that the ASTM 572 Gr50 steel shows pitting corrosion in crude oil systems. The electrochemical results revealed that the corrosion potential of API X60 steel was more negative; however the ASTM 572 Gr50 steel had a higher current density and a lower polarization resistance when immersed in an oil/seawater mixture. It also observed that, after being immersed in the corrosive fluids, the microstructures of the steels were not modified and variations in their microhardness (HV were minute.

  17. The American Society of Pediatric Hematology/Oncology workforce assessment: Part 2-Implications for fellowship training.

    Science.gov (United States)

    Leavey, P J; Hilden, J M; Matthews, D; Dandoy, C; Badawy, S M; Shah, M; Wayne, A S; Hord, J

    2018-02-01

    The American Society of Pediatric Hematology/Oncology (ASPHO) solicited information from division directors and fellowship training program directors to capture pediatric hematology/oncology (PHO) specific workforce data of 6 years (2010-2015), in response to an increase in graduating fellows during that time. Observations included a stable number of physicians and advanced practice providers (APPs) in clinical PHO, an increased proportion of APPs hired compared to physicians, and an increase in training-level first career positions. Rapid changes in the models of PHO care have significant implications to current and future trainees and require continued analysis to understand the evolving discipline of PHO. © 2017 Wiley Periodicals, Inc.

  18. American Society for Pain Management nursing position statement: pain management in patients with substance use disorders.

    Science.gov (United States)

    Oliver, June; Coggins, Candace; Compton, Peggy; Hagan, Susan; Matteliano, Deborah; Stanton, Marsha; St Marie, Barbara; Strobbe, Stephen; Turner, Helen N

    2012-10-01

    The American Society for Pain Management Nursing (ASPMN) has updated its position statement on managing pain in patients with substance use disorders. This position statement is endorsed by the International Nurses Society on Addictions (IntNSA) and includes clinical practice recommendations based on current evidence. It is the position of ASPMN and IntNSA that every patient with pain, including those with substance use disorders, has the right to be treated with dignity, respect, and high-quality pain assessment and management. Failure to identify and treat the concurrent conditions of pain and substance use disorders will compromise the ability to treat either condition effectively. Barriers to caring for these patients include stigmatization, misconceptions, and limited access to providers skilled in these two categories of disorders. Topics addressed in this position statement include the scope of substance use and related disorders, conceptual models of addiction, ethical considerations, addiction risk stratification, and clinical recommendations.

  19. 75 FR 20913 - Center for Devices and Radiological Health; New Address Information

    Science.gov (United States)

    2010-04-22

    ... number 1 in paragraph (f)(2) to read as follows: Sec. 801.430 User labeling for menstrual tampons... in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy from the American Society... 19428-2959, 610-832-9578, www.astm.org . You may inspect a copy at the FDA Main Library, 10903 New...

  20. Image Guided Cervical Brachytherapy: 2014 Survey of the American Brachytherapy Society

    Energy Technology Data Exchange (ETDEWEB)

    Grover, Surbhi, E-mail: Surbhi.grover@uphs.upenn.edu [Department of Radiation Oncology, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania (United States); Harkenrider, Matthew M. [Department of Radiation Oncology, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Cho, Linda P. [Department of Radiation Oncology, Brigham & Women' s Hospital/Dana-Farber Cancer Institute, Boston, Massachusetts (United States); Erickson, Beth [Department Radiation Oncology, Froedtert Hospital and Medical College of Wisconsin, Milwaukee, Wisconsin (United States); Small, Christina [Department of Public Health Sciences, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Small, William [Department of Radiation Oncology, Stritch School of Medicine, Loyola University Chicago, Chicago, Illinois (United States); Viswanathan, Akila N. [Department of Radiation Oncology, Brigham & Women' s Hospital/Dana-Farber Cancer Institute, Boston, Massachusetts (United States)

    2016-03-01

    Purpose: To provide an update of the 2007 American brachytherapy survey on image-based brachytherapy, which showed that in the setting of treatment planning for gynecologic brachytherapy, although computed tomography (CT) was often used for treatment planning, most brachytherapists used point A for dose specification. Methods and Materials: A 45-question electronic survey on cervical cancer brachytherapy practice patterns was sent to all American Brachytherapy Society members and additional radiation oncologists and physicists based in the United States between January and September 2014. Responses from the 2007 survey and the present survey were compared using the χ{sup 2} test. Results: There were 370 respondents. Of those, only respondents, not in training, who treat more than 1 cervical cancer patient per year and practice in the United States, were included in the analysis (219). For dose specification to the target (cervix and tumor), 95% always use CT, and 34% always use MRI. However, 46% use point A only for dose specification to the target. There was a lot of variation in parameters used for dose evaluation of target volume and normal tissues. Compared with the 2007 survey, use of MRI has increased from 2% to 34% (P<.0001) for dose specification to the target. Use of volume-based dose delineation to the target has increased from 14% to 52% (P<.0001). Conclusion: Although use of image-based brachytherapy has increased in the United States since the 2007 survey, there is room for further growth, particularly with the use of MRI. This increase may be in part due to educational initiatives. However, there is still significant heterogeneity in brachytherapy practice in the United States, and future efforts should be geared toward standardizing treatment.

  1. Tweeting the Meeting: Twitter Use at The American Society of Breast Surgeons Annual Meeting 2013-2016.

    Science.gov (United States)

    Attai, Deanna J; Radford, Diane M; Cowher, Michael S

    2016-10-01

    Twitter social media is being used to disseminate medical meeting information. Meeting attendees and other interested parties have the ability to follow and participate in conversations related to meeting content. We analyzed Twitter activity generated from the 2013-2016 American Society of Breast Surgeons Annual Meetings. The Symplur Signals database was used to determine number of tweets, tweets per user, and impressions for each meeting. The number of unique physicians, patients/caregivers/advocates, and industry participants was determined. Physician tweeters were cross-referenced with membership and attendance rosters. Tweet transcripts were analyzed for content and tweets were categorized as either scientific, social, administrative, industry promotion, or irrelevant. From 2013 to 2016, the number of tweets increased by 600 %, the number of Twitter users increased by 450 %, and the number of physician tweeters increased by 457 %. The number of impressions (tweets × followers) increased from more than 3.5 million to almost 20.5 million, an increase of 469 %. The majority of tweets were informative (70-80 %); social tweets ranged from 13 to 23 %. A small percentage (3-6 %) of tweets were related to administrative matters. There were very few industry or irrelevant tweets. Twitter social media use at the American Society of Breast Surgeons annual meeting showed a substantial increase during the time period evaluated. The use of Twitter during professional meetings is a tremendous opportunity to share information. The authors feel that medical conference organizers should encourage Twitter participation and should be educating attendees on the proper use of Twitter.

  2. Progress in Developing Finite Element Models Replicating Flexural Graphite Testing

    International Nuclear Information System (INIS)

    Bratton, Robert

    2010-01-01

    This report documents the status of flexural strength evaluations from current ASTM procedures and of developing finite element models predicting the probability of failure. This work is covered under QLD REC-00030. Flexural testing procedures of the American Society for Testing and Materials (ASTM) assume a linear elastic material that has the same moduli for tension and compression. Contrary to this assumption, graphite is known to have different moduli for tension and compression. A finite element model was developed and demonstrated that accounts for the difference in moduli tension and compression. Brittle materials such as graphite exhibit significant scatter in tensile strength, so probabilistic design approaches must be used when designing components fabricated from brittle materials. ASTM procedures predicting probability of failure in ceramics were compared to methods from the current version of the ASME graphite core components rules predicting probability of failure. Using the ASTM procedures yields failure curves at lower applied forces than the ASME rules. A journal paper was published in the Journal of Nuclear Engineering and Design exploring the statistical models of fracture in graphite.

  3. The American Society for Radiation Oncology's 2010 Core Physics Curriculum for Radiation Oncology Residents

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Ying, E-mail: ying.xiao@jefferson.edu [Thomas Jefferson University Hospital, Philadelphia, PA (United States); De Amorim Bernstein, Karen [Montefiore Medical Center, Bronx, NY (United States); Chetty, Indrin J. [Henry Ford Health System, Detroit, MI (United States); Eifel, Patricia [M. D. Anderson Cancer Center, Houston, TX (United States); Hughes, Lesley [Cooper University Hospital, Camden, NJ (United States); Klein, Eric E. [Washington University, Saint Louis, MO (United States); McDermott, Patrick [William Beaumont Hospital, Royal Oak, MI (United States); Prisciandaro, Joann [University of Michigan, Ann Arbor, MI (United States); Paliwal, Bhudatt [University of Wisconsin, Madison, WI (United States); Price, Robert A. [Fox Chase Cancer Center, Philadelphia, PA (United States); Werner-Wasik, Maria [Thomas Jefferson University Hospital, Philadelphia, PA (United States); Palta, Jatinder R. [University of Florida, Gainesville, FL (United States)

    2011-11-15

    Purpose: In 2004, the American Society for Radiation Oncology (ASTRO) published its first physics education curriculum for residents, which was updated in 2007. A committee composed of physicists and physicians from various residency program teaching institutions was reconvened again to update the curriculum in 2009. Methods and Materials: Members of this committee have associations with ASTRO, the American Association of Physicists in Medicine, the Association of Residents in Radiation Oncology, the American Board of Radiology (ABR), and the American College of Radiology. Members reviewed and updated assigned subjects from the last curriculum. The updated curriculum was carefully reviewed by a representative from the ABR and other physics and clinical experts. Results: The new curriculum resulted in a recommended 56-h course, excluding initial orientation. Learning objectives are provided for each subject area, and a detailed outline of material to be covered is given for each lecture hour. Some recent changes in the curriculum include the addition of Radiation Incidents and Bioterrorism Response Training as a subject and updates that reflect new treatment techniques and modalities in a number of core subjects. The new curriculum was approved by the ASTRO board in April 2010. We anticipate that physicists will use this curriculum for structuring their teaching programs, and subsequently the ABR will adopt this educational program for its written examination. Currently, the American College of Radiology uses the ASTRO curriculum for their training examination topics. In addition to the curriculum, the committee updated suggested references and the glossary. Conclusions: The ASTRO physics education curriculum for radiation oncology residents has been updated. To ensure continued commitment to a current and relevant curriculum, the subject matter will be updated again in 2 years.

  4. Atopic Dermatitis Guideline. Position Paper from the Latin American Society of Allergy, Asthma and Immunology

    Directory of Open Access Journals (Sweden)

    Jorge Sánchez

    2014-06-01

    Full Text Available As in other regions, the incidence of atopic dermatitis in Latin America has been increasing in recent years. Although there are several clinical guidelines, many of their recommendations cannot be universal since they depend on the characteristics of each region. Thus, we decided to create a consensus guideline on atopic dermatitis applicable in Latin America and other tropical regions, taking into account socio-economic, geographical, cultural and health care system characteristics. The Latin American Society of Allergy Asthma and Immunology (SLAAI conducted a systematic search for articles related to the pathophysiology, diagnosis and treatment of dermatitis using various electronic resources such as Google, Pubmed, EMBASE (Ovid and Cochrane data base. We have also looked for all published articles in Latin America on the subject using LILACS (Latin American and Caribbean Literature on Health Sciences database. Each section was reviewed by at least two members of the committee, and the nal version was subsequently approved by all of them, using the Delphi methodology for consensus building. Afterward, the nal document was shared for external evaluation with physicians, specialists (allergists, dermatologists and pediatricians, patients and academic institutions such as universities and scienti c societies related to the topic. All recommendations made by these groups were taken into account for the nal drafting of the document. There are few original studies conducted in Latin America about dermatitis; however, we were able to create a practical guideline for Latin America taking into account the particularities of the region. Moreover, the integral management was highlighted including many of the recommendations from different participants in the health care of this disease (patients, families, primary care physicians and specialists. This practical guide presents a concise approach to the diagnosis and management of atopic dermatitis that

  5. Atopic dermatitis guideline. Position paper from the Latin American Society of Allergy, Asthma and Immunology.

    Science.gov (United States)

    Sánchez, Jorge; Páez, Bruno; Macías, A; Olmos, C; de Falco, A

    2014-01-01

    As in other regions, the incidence of atopic dermatitis in Latin America has been increasing in recent years. Although there are several clinical guidelines, many of their recommendations cannot be universal since they depend on the characteristics of each region. Thus, we decided to create a consensus guideline on atopic dermatitis applicable in Latin America and other tropical regions, taking into account socio-economic, geographical, cultural and health care system characteristics. The Latin American Society of Allergy Asthma and Immunology (SLAAI) conducted a systematic search for articles related to the pathophysiology, diagnosis and treatment of dermatitis using various electronic resources such as Google, Pubmed, EMBASE (Ovid) and Cochrane data base. We have also looked for all published articles in Latin America on the subject using LILACS (Latin American and Caribbean Literature on Health Sciences) database. Each section was reviewed by at least two members of the committee, and the final version was subsequently approved by all of them, using the Delphi methodology for consensus building. Afterward, the final document was shared for external evaluation with physicians, specialists (allergists, dermatologists and pediatricians), patients and academic institutions such as universities and scientific societies related to the topic. All recommendations made by these groups were taken into account for the final drafting of the document. There are few original studies conducted in Latin America about dermatitis; however, we were able to create a practical guideline for Latin America taking into account the particularities of the region. Moreover, the integral management was highlighted including many of the recommendations from different participants in the health care of this disease (patients, families, primary care physicians and specialists). This practical guide presents a concise approach to the diagnosis and management of atopic dermatitis that can be

  6. Publications Rates for Podium and Poster Presentations from the American Orthopaedic Foot & Ankle Society.

    Science.gov (United States)

    Williams, Benjamin R; Kunas, Grace C; Deland, Jonathan T; Ellis, Scott J

    2017-01-01

    National orthopaedic meetings are used to disseminate current research through podium and poster abstract presentations. Not all of these abstracts go on to full-text journal publication. The purpose of this study was to determine the publication rates of podium and poster presentations from the American Orthopaedic Foot & Ankle Society (AOFAS) annual meetings between 2008 and 2012. All accepted podium and poster abstracts from the 2008-2012 AOFAS annual meetings were compiled from the AOFAS office, Physician Resource Center website, and hardcopy meeting programs. PubMed and Google Scholar searches were performed for journal publications using key words in the presentation abstracts and authors' names. Full-text journal publication rates for the presentations were calculated per year, as were the most common journals of publication. Overall full-text publication rate was 73.7% for podium presentations and 55.8% for posters. Podium presentations were published in a journal significantly more often than posters ( P poster presentations, respectively ( P = .124). The most common journal for podium and poster publications was Foot & Ankle International. Podium abstracts were significantly more likely to be published compared to posters. The AOFAS overall full-text journal publication rate was one of the higher reported rates compared with other national orthopedic society meetings, which have ranged from 34% to 73%.

  7. Using social media to create a professional network between physician-trainees and the American Society of Nephrology.

    Science.gov (United States)

    Shariff, Afreen I; Fang, Xiangming; Desai, Tejas

    2013-07-01

    Twitter is the fastest growing social media network. It offers participants the ability to network with other individuals. Medical societies are interested in helping individuals network to boost recruitment, encourage collaboration, and assist in job placement. We hypothesized that the American Society of Nephrology (ASN) successfully used Twitter to create a network between participants and itself to stay connected with its members. Tweets from 3 Twitter networking sessions during Kidney Week 2011 were analyzed for content. These messages were used to create a network between all participants of the networking sessions. The network was analyzed for strength and influence by calculating clustering coefficients (CC) and eigenvector centrality (EC) scores, respectively. Eight moderators and 9 trainees authored 376 Twitter messages. Most tweets by trainees (64%) and moderators (61%) discussed 1 of 3 themes: networking, education, or navigating Kidney Week 2011. A total of 25 online network connections were established during the 3 sessions; 20% were bidirectional. The CC for the network was 0.300. All moderators formed at least 1 connection, but 7 of the 9 trainees failed to make any connections. ASN made 5 unidirectional and 0 bidirectional connections with a low EC of 0.108. ASN was unable to form powerful connections with trainees through Twitter, but medical societies should not be discouraged by the results reported in this investigation. As societies become more familiar with Twitter and understand the mechanisms to develop connections, these societies will have a greater influence within increasingly stronger networks. Copyright © 2013 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  8. An examination of gender differences in the American Fisheries Society peer-review process

    Science.gov (United States)

    Handley, Grace; Frantz, Cynthia M; Kocovsky, Patrick; DeVries, Dennis R.; Cooke, Steven J.; Claussen, Julie

    2015-01-01

    This study investigated the possibility of gender differences in outcomes throughout the peer review process of American Fisheries Society (AFS) journals. For each manuscript submitted to four AFS journals between January 2003 and December 2010, we collated information regarding the gender and nationality of authors, gender of associate editor, gender of reviewers, reviewer recommendations, associate editor's decision, and publication status of the manuscript. We used hierarchical linear modeling to test for differences in manuscript decision outcomes associated with author, reviewer, and associate editor gender. Gender differences were present at some but not every stage of the review process and were not equal among the four journals. Although there was a small gender difference in decision outcomes, we found no evidence of bias in editors’ and reviewers’ recommendations. Our results support the conclusion that the current single-blind review system does not result in bias against female authors within AFS journals.

  9. Reactor pressure vessel steels ASTM A533B and A508 Cl.2

    International Nuclear Information System (INIS)

    Pelli, R.; Kemppainen, M.; Toerroenen, K.

    1979-11-01

    This report presents the tensile test results of steels ASTM A533B and A508 Cl.2 obtained in connection with a programme initiated to gather and create information needed for the assessment of the structural integrity of the reactor pressure vessels. The tensile properties were studied between -196 and 300 degC varying austenitizing and tempering temperatures and having two different carbon contents for the heats of A533B. (author)

  10. The Role of the Small Private College in Creating a Moral, Spiritual Climate in American Society. CASC Newsletter Supplements, 1976-77.

    Science.gov (United States)

    Hatfield, Mark

    The capacity of American institutions to preserve and convey basic values to new generations has substantially diminished, suggests this former U.S. Senator from Oregon. His opinion is that the small private college can help create a moral and spiritual climate in society. The range of topics discussed includes: college preservation of values;…

  11. Cultural macroevolution on neighbor graphs : vertical and horizontal transmission among Western North American Indian societies.

    Science.gov (United States)

    Towner, Mary C; Grote, Mark N; Venti, Jay; Borgerhoff Mulder, Monique

    2012-09-01

    What are the driving forces of cultural macroevolution, the evolution of cultural traits that characterize societies or populations? This question has engaged anthropologists for more than a century, with little consensus regarding the answer. We develop and fit autologistic models, built upon both spatial and linguistic neighbor graphs, for 44 cultural traits of 172 societies in the Western North American Indian (WNAI) database. For each trait, we compare models including or excluding one or both neighbor graphs, and for the majority of traits we find strong evidence in favor of a model which uses both spatial and linguistic neighbors to predict a trait's distribution. Our results run counter to the assertion that cultural trait distributions can be explained largely by the transmission of traits from parent to daughter populations and are thus best analyzed with phylogenies. In contrast, we show that vertical and horizontal transmission pathways can be incorporated in a single model, that both transmission modes may indeed operate on the same trait, and that for most traits in the WNAI database, accounting for only one mode of transmission would result in a loss of information.

  12. Impact of ASTM Standard E722 update on radiation damage metrics

    Energy Technology Data Exchange (ETDEWEB)

    DePriest, Kendall Russell [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-06-01

    The impact of recent changes to the ASTM Standard E722 is investigated. The methodological changes in the production of the displacement kerma factors for silicon has significant impact for some energy regions of the 1-MeV(Si) equivalent fluence response function. When evaluating the integral over all neutrons energies in various spectra important to the SNL electronics testing community, the change in the response results in an increase in the total 1-MeV(Si) equivalent fluence of 2 7%. Response functions have been produced and are available for users of both the NuGET and MCNP codes.

  13. Current Ketamine Practice: Results of the 2016 American Society of Pain Management Nursing Survey on Ketamine.

    Science.gov (United States)

    Klaess, Cynthia C; Jungquist, Carla R

    2018-06-01

    Ketamine is increasingly utilized for a variety of pain management challenges. Audience comments from a ketamine presentation at the 2015 American Society of Pain Management Nursing (ASPMN) Conference reflected wide variation in ketamine practices as well as barriers to use. The goal was to gain a greater understanding of ASPMN member practice patterns and barriers related to ketamine as adjunctive therapy for pain management. A questionnaire survey design was used. Respondents represented 35 states and 2 countries. The participants were 146 respondents from ASPMN membership (1,485 members). The survey was distributed by ASPMN on SurveyMonkey. Practice setting and ketamine administration practices were assessed with areas for comments. Results were reviewed using frequencies to describe responses and formatted into tables. Comments were individually reviewed and grouped into common themes. Administration of ketamine as an analgesic was reported by 63% of respondents. Continuous intravenous ketamine infusions were the most common route of administration (65%); however, wide variability in dosing and length of therapy was reported. A wide variety of practices and challenges related to ketamine utilization were noted. Numerous studies have indicated the analgesic benefits of ketamine in pain management. The lack of practice standardization has created challenges to its consistent use and outcome measurement. Additionally, the off-label use of ketamine for pain management creates its own unique challenges. However, given the current national climate with intense focus on pain management, interdisciplinary practitioners have an ideal opportunity to evaluate ketamine's use in a comprehensive approach to pain management. Copyright © 2018 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

  14. American Meteor Society Fireball reporting system and mobile application

    Science.gov (United States)

    Hankey, M.

    2014-07-01

    The American Meteor Society (AMS) founded in 1911 pioneered the visual study of meteors and has collected data relating to meteor observations and bright fireballs for over 100 years. In December 2010, the online fireball reporting system was upgraded to an interactive application that utilizes Google Maps and other programmatic methods to pinpoint the observer's location, azimuth and elevation values with a high degree of precision. The AMS has collected 10s of 1000s of witness reports relating to 100s of events each year since the new application was released. Three dimensional triangulation methods that average the data collected from witnesses have been developed that can determine the start and end points of the meteor with an accuracy of web application. Users can file a new report directly on the phone or update the values submitted through a web report. After web users complete their fireball report online, they are prompted to download the app and update their observation with the more precise data provided by the sensors in the mobile device. The mobile app also provides an accurate means for the witness to report the elapsed time of the fireball. To log this value, the user drags the device across the sky where they saw the fireball. This process is designed to require no button click or user interaction to start and stop the time recording. A count down initiates the process and once the user's phone crosses the plane of azimuth for the end point of the fireball the velocity timer automatically stops. Users are asked to log the recording three times in an effort to minimize error. The three values are then averaged into a final score. Once enough witnesses have filed reports, elapsed time data collected from the mobile phone can be used to determine the velocity of the fireball. With the velocity, trajectory solution and RA/DEC the AMS can plot orbital estimates for significant fireball events reported to the society. Our hope is that overtime this

  15. Ensaios MSCR segundo as normas ASTM D7405-10a e AASHTO T350-14: um estudo de caso envolvendo ligantes asfálticos modificados

    Directory of Open Access Journals (Sweden)

    Matheus David Inocente Domingos

    2016-12-01

    especially the AC+rubber and the AC+rubber+PPA. The AC+PPA showed low stress sensitivity and the best results for the parameters R and Jnr at 3,200 Pa either in the ASTM or the AASHTO protocols, which justifies its choice as the best formulation. The data from the modified asphalt binders suggest that the change from the ASTM protocol to the AASHTO one is recommended.

  16. Wood particleboard and flakeboard : types, grades, and uses

    Science.gov (United States)

    C. G. Carll

    1986-01-01

    This report is for those who use or may want to use wood particleboard. The term bparticleboardc is used as defined in the American Society for Testing and Materials (ASTM) Standard D 1554, which includes flakeboards as a subclass of particleboards, and not as used in the lumber trade where the term is usually reserved for panels made of fine wood particles such as...

  17. “Abandon All Hope Ye Who Enter Here”: The Critique Of Consumer Society In American Psycho and Fight Club

    OpenAIRE

    Liktor, Coşkun

    2016-01-01

    This article explores the politics of two films, namely American Psycho (Mary Harron, 2000) and Fight Club (David Fincher, 1999), both of which portray a privileged, white collar protagonist suffering from a personality disorder that leads him to commit violent acts. Set in the late 20th century America characterized by rampant consumerism, stark materialism and fierce competition, both films suggest that it is the debilitating impact of the commodifed, commodity-driven consumer society that ...

  18. The new totalitarian society

    Directory of Open Access Journals (Sweden)

    Vlajki Emil

    2011-01-01

    Full Text Available The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout history. For instance, the Inquisition, which, contrary to what happened at scholastic universities, severely berated rational thinking in practice. Catholicism helped carry out genocide against the Jews, and Orthodoxy is in a certain manner tied in with Stalinism. The new totalitarian society is anchored in American Protestantism. On the whole, Christian rationalism is a sphere of science, techniques and technologies efficiently employed to promote the West to the status of a society of plenty and the conception of human rights, which turn into their opposite and irrational behavior of the worst kind. An example of such inhumanity is the attack against Yugoslavia/Serbia in 1999.

  19. Standardizing Clinically Meaningful Outcome Measures Beyond HbA1c for Type 1 Diabetes: A Consensus Report of the American Association of Clinical Endocrinologists, the American Association of Diabetes Educators, the American Diabetes Association, the Endocrine Society, JDRF International, The Leona M. and Harry B. Helmsley Charitable Trust, the Pediatric Endocrine Society, and the T1D Exchange.

    Science.gov (United States)

    Agiostratidou, Gina; Anhalt, Henry; Ball, Dana; Blonde, Lawrence; Gourgari, Evgenia; Harriman, Karen N; Kowalski, Aaron J; Madden, Paul; McAuliffe-Fogarty, Alicia H; McElwee-Malloy, Molly; Peters, Anne; Raman, Sripriya; Reifschneider, Kent; Rubin, Karen; Weinzimer, Stuart A

    2017-12-01

    To identify and define clinically meaningful type 1 diabetes outcomes beyond hemoglobin A 1c (HbA 1c ) based upon a review of the evidence, consensus from clinical experts, and input from researchers, people with type 1 diabetes, and industry. Priority outcomes include hypoglycemia, hyperglycemia, time in range, diabetic ketoacidosis (DKA), and patient-reported outcomes (PROs). While priority outcomes for type 1 and type 2 diabetes may overlap, type 1 diabetes was the focus of this work. A Steering Committee-comprising representatives from the American Association of Clinical Endocrinologists, the American Association of Diabetes Educators, the American Diabetes Association, the Endocrine Society, JDRF International, The Leona M. and Harry B. Helmsley Charitable Trust, the Pediatric Endocrine Society, and the T1D Exchange-was the decision-making body for the Type 1 Diabetes Outcomes Program. Their work was informed by input from researchers, industry, and people with diabetes through Advisory Committees representing each stakeholder group. Stakeholder surveys were used to identify priority outcomes. The outcomes prioritized in the surveys were hypoglycemia, hyperglycemia, time in range, DKA, and PROs. To develop consensus on the definitions of these outcomes, the Steering Committee relied on published evidence, their clinical expertise, and feedback from the Advisory Committees. The Steering Committee developed definitions for hypoglycemia, hyperglycemia, time in range, and DKA in type 1 diabetes. The definitions reflect their assessment of the outcome's short- and long-term clinical impact on people with type 1 diabetes. Knowledge gaps to be addressed by future research were identified. The Steering Committee discussed PROs and concluded that further type 1 diabetes-specific development is needed. The Steering Committee recommends use of the defined clinically meaningful outcomes beyond HbA 1c in the research, development, and evaluation of type 1 diabetes

  20. Nuclear criticality safety experiments, calculations, and analyses - 1958 to 1982. Volume 2. Summaries. Complilation of papers from the Transactions of the American Nuclear Society

    International Nuclear Information System (INIS)

    Koponen, B.L.; Hampel, V.E.

    1982-01-01

    This compilation contains 688 complete summaries of papers on nuclear criticality safety as presented at meetings of the American Nuclear Society (ANS). The selected papers contain criticality parameters for fissile materials derived from experiments and calculations, as well as criticality safety analyses for fissile material processing, transport, and storage. The compilation was developed as a component of the Nuclear Criticality Information System (NCIS) now under development at the Lawrence Livermore National Laboratory. The compilation is presented in two volumes: Volume 1 contains a directory to the ANS Transaction volume and page number where each summary was originally published, the author concordance, and the subject concordance derived from the keyphrases in titles. Volume 2 contains-in chronological order-the full-text summaries, reproduced here by permission of the American Nuclear Society from their Transactions, volumes 1-41

  1. Nuclear criticality safety experiments, calculations, and analyses - 1958 to 1982. Volume 2. Summaries. Complilation of papers from the Transactions of the American Nuclear Society

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, B.L.; Hampel, V.E.

    1982-10-21

    This compilation contains 688 complete summaries of papers on nuclear criticality safety as presented at meetings of the American Nuclear Society (ANS). The selected papers contain criticality parameters for fissile materials derived from experiments and calculations, as well as criticality safety analyses for fissile material processing, transport, and storage. The compilation was developed as a component of the Nuclear Criticality Information System (NCIS) now under development at the Lawrence Livermore National Laboratory. The compilation is presented in two volumes: Volume 1 contains a directory to the ANS Transaction volume and page number where each summary was originally published, the author concordance, and the subject concordance derived from the keyphrases in titles. Volume 2 contains-in chronological order-the full-text summaries, reproduced here by permission of the American Nuclear Society from their Transactions, volumes 1-41.

  2. Minutes of the 45. meeting of the American society of therapeutic radiology and oncology (Astro)

    International Nuclear Information System (INIS)

    Racadot, S.; Mazeron, J.J.

    2003-01-01

    The forty fifth meeting of the American Society of Therapeutic Radiology and Oncology (ASTRO) held at the center of congress in Salt Lake city in october 2003. 542 scientific works have been presented, whom 221 orally. Escalation of radiation doses in prostate cancers have been studied. Fractionation and hormones therapy in prostate cancers are reported. The bladder cancers made the object of information, the bronchi cancer ( non at small cells and at small cells) have been analysed. Cancers of the ORL sphere, mammary gland and brain metastases were presented. The radiotherapy as a palliative treatment of bone metastases made the object of a report. The receptors of the epidermoid growth factor has been shown as an important factor to predict the tumor response to irradiation. (N.C.)

  3. Changing Anthropology, Changing Society

    Science.gov (United States)

    Varughese, Heather

    2009-01-01

    Fifty years after the founding of the field of medical anthropology, the Society for Medical Anthropology of the American Anthropological Association held its first independent meeting on September 24-27, 2009, at Yale University. PMID:20027281

  4. ASCO 2007: “Translating Research into Practice”. Report from the 34th Annual Meeting of the American Society of Clinical Oncology

    Directory of Open Access Journals (Sweden)

    Camillo Porta

    2011-12-01

    Full Text Available This year, for the 34th time in its history, the mastodontic machinery of the American Society of Clinical Oncology (ASCO once again welcomed thousand of members and participants from all over the world to the Society’s annual meeting, which, this year, took place in the ample and well-appointed, McCormick’s Convention Center in Chicago, Illinois...

  5. 46 CFR 188.10-59 - Recognized classification society.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Recognized classification society. 188.10-59 Section 188... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-59 Recognized classification society. This term means the American Bureau of Shipping or other classification society...

  6. Interpreting the ASTM 'content standard for digital geospatial metadata'

    Science.gov (United States)

    Nebert, Douglas D.

    1996-01-01

    ASTM and the Federal Geographic Data Committee have developed a content standard for spatial metadata to facilitate documentation, discovery, and retrieval of digital spatial data using vendor-independent terminology. Spatial metadata elements are identifiable quality and content characteristics of a data set that can be tied to a geographic location or area. Several Office of Management and Budget Circulars and initiatives have been issued that specify improved cataloguing of and accessibility to federal data holdings. An Executive Order further requires the use of the metadata content standard to document digital spatial data sets. Collection and reporting of spatial metadata for field investigations performed for the federal government is an anticipated requirement. This paper provides an overview of the draft spatial metadata content standard and a description of how the standard could be applied to investigations collecting spatially-referenced field data.

  7. International association for the study of lung cancer/american thoracic society/european respiratory society international multidisciplinary classification of lung adenocarcinoma.

    Science.gov (United States)

    Travis, William D; Brambilla, Elisabeth; Noguchi, Masayuki; Nicholson, Andrew G; Geisinger, Kim R; Yatabe, Yasushi; Beer, David G; Powell, Charles A; Riely, Gregory J; Van Schil, Paul E; Garg, Kavita; Austin, John H M; Asamura, Hisao; Rusch, Valerie W; Hirsch, Fred R; Scagliotti, Giorgio; Mitsudomi, Tetsuya; Huber, Rudolf M; Ishikawa, Yuichi; Jett, James; Sanchez-Cespedes, Montserrat; Sculier, Jean-Paul; Takahashi, Takashi; Tsuboi, Masahiro; Vansteenkiste, Johan; Wistuba, Ignacio; Yang, Pan-Chyr; Aberle, Denise; Brambilla, Christian; Flieder, Douglas; Franklin, Wilbur; Gazdar, Adi; Gould, Michael; Hasleton, Philip; Henderson, Douglas; Johnson, Bruce; Johnson, David; Kerr, Keith; Kuriyama, Keiko; Lee, Jin Soo; Miller, Vincent A; Petersen, Iver; Roggli, Victor; Rosell, Rafael; Saijo, Nagahiro; Thunnissen, Erik; Tsao, Ming; Yankelewitz, David

    2011-02-01

    Adenocarcinoma is the most common histologic type of lung cancer. To address advances in oncology, molecular biology, pathology, radiology, and surgery of lung adenocarcinoma, an international multidisciplinary classification was sponsored by the International Association for the Study of Lung Cancer, American Thoracic Society, and European Respiratory Society. This new adenocarcinoma classification is needed to provide uniform terminology and diagnostic criteria, especially for bronchioloalveolar carcinoma (BAC), the overall approach to small nonresection cancer specimens, and for multidisciplinary strategic management of tissue for molecular and immunohistochemical studies. An international core panel of experts representing all three societies was formed with oncologists/pulmonologists, pathologists, radiologists, molecular biologists, and thoracic surgeons. A systematic review was performed under the guidance of the American Thoracic Society Documents Development and Implementation Committee. The search strategy identified 11,368 citations of which 312 articles met specified eligibility criteria and were retrieved for full text review. A series of meetings were held to discuss the development of the new classification, to develop the recommendations, and to write the current document. Recommendations for key questions were graded by strength and quality of the evidence according to the Grades of Recommendation, Assessment, Development, and Evaluation approach. The classification addresses both resection specimens, and small biopsies and cytology. The terms BAC and mixed subtype adenocarcinoma are no longer used. For resection specimens, new concepts are introduced such as adenocarcinoma in situ (AIS) and minimally invasive adenocarcinoma (MIA) for small solitary adenocarcinomas with either pure lepidic growth (AIS) or predominant lepidic growth with ≤ 5 mm invasion (MIA) to define patients who, if they undergo complete resection, will have 100% or near 100

  8. Multidimensional Diagnostic Criteria for Chronic Pain: Introduction to the ACTTION-American Pain Society Pain Taxonomy (AAPT).

    Science.gov (United States)

    Dworkin, Robert H; Bruehl, Stephen; Fillingim, Roger B; Loeser, John D; Terman, Gregory W; Turk, Dennis C

    2016-09-01

    A variety of approaches have been used to develop diagnostic criteria for chronic pain. The published evidence of the reliability and validity of existing diagnostic criteria is limited, and these criteria have typically not been used in clinical practice. The availability of a widely accepted, consistently applied, and evidence-based taxonomy of diagnostic criteria would improve the quality of clinical research on chronic pain and would be of great value in clinical practice. To address the need for evidence-based diagnostic criteria for the major chronic pain conditions, the Analgesic, Anesthetic, and Addiction Clinical Trial Translations, Innovations, Opportunities, and Networks (ACTTION) public-private partnership with the US Food and Drug Administration and the American Pain Society (APS) have collaborated on the development of the ACTTION-APS Pain Taxonomy (AAPT). AAPT provides a multidimensional framework that is applied systematically in the development of diagnostic criteria. This article (1) describes the background and rationale for AAPT; (2) presents the AAPT taxonomy and the specific conditions for which diagnostic criteria have been developed (to be published separately); (3) briefly reviews the 5 dimensions that constitute the AAPT multidimensional framework and describes the 7 accompanying articles that discuss these dimensions and other important issues involving AAPT; and (4) provides an overview of next steps, specifically, the general processes by which the initial set of diagnostic criteria (for which the evidence base has been drawn from the literature, systematic reviews, and secondary analyses of existing databases) will undergo additional assessments of reliability and validity. To address the need for evidence-based diagnostic criteria for the major chronic pain conditions, the AAPT provides a multidimensional framework that is applied systematically in the development of diagnostic criteria. The long-term objective of AAPT is to advance

  9. Validation of the Society of Critical Care Medicine and American Society for Parenteral and Enteral Nutrition Recommendations for Caloric Provision to Critically Ill Obese Patients: A Pilot Study.

    Science.gov (United States)

    Mogensen, Kris M; Andrew, Benjamin Y; Corona, Jasmine C; Robinson, Malcolm K

    2016-07-01

    The Society of Critical Care Medicine (SCCM) and American Society for Parenteral and Enteral Nutrition (ASPEN) recommend that obese, critically ill patients receive 11-14 kcal/kg/d using actual body weight (ABW) or 22-25 kcal/kg/d using ideal body weight (IBW), because feeding these patients 50%-70% maintenance needs while administering high protein may improve outcomes. It is unknown whether these equations achieve this target when validated against indirect calorimetry, perform equally across all degrees of obesity, or compare well with other equations. Measured resting energy expenditure (MREE) was determined in obese (body mass index [BMI] ≥30 kg/m(2)), critically ill patients. Resting energy expenditure was predicted (PREE) using several equations: 12.5 kcal/kg ABW (ASPEN-Actual BW), 23.5 kcal/kg IBW (ASPEN-Ideal BW), Harris-Benedict (adjusted-weight and 1.5 stress-factor), and Ireton-Jones for obesity. Correlation of PREE to 65% MREE, predictive accuracy, precision, bias, and large error incidence were calculated. All equations were significantly correlated with 65% MREE but had poor predictive accuracy, had excessive large error incidence, were imprecise, and were biased in the entire cohort (N = 31). In the obesity cohort (n = 20, BMI 30-50 kg/m(2)), ASPEN-Actual BW had acceptable predictive accuracy and large error incidence, was unbiased, and was nearly precise. In super obesity (n = 11, BMI >50 kg/m(2)), ASPEN-Ideal BW had acceptable predictive accuracy and large error incidence and was precise and unbiased. SCCM/ASPEN-recommended body weight equations are reasonable predictors of 65% MREE depending on the equation and degree of obesity. Assuming that feeding 65% MREE is appropriate, this study suggests that patients with a BMI 30-50 kg/m(2) should receive 11-14 kcal/kg/d using ABW and those with a BMI >50 kg/m(2) should receive 22-25 kcal/kg/d using IBW. © 2015 American Society for Parenteral and Enteral Nutrition.

  10. Cavitation erosion - corrosion behaviour of ASTM A27 runner steel in natural river water

    International Nuclear Information System (INIS)

    Tôn-Thât, L

    2014-01-01

    Cavitation erosion is still one of the most important degradation modes in hydraulic turbine runners. Part of researches in this field focuses on finding new materials, coatings and surface treatments to improve the resistance properties of runners to this phenomenon. However, only few studies are focused on the deleterious effect of the environment. Actually, in some cases a synergistic effect between cavitation erosion mechanisms and corrosion kinetics can establish and increase erosion rate. In the present study, the cavitation erosion-corrosion behaviour of ASTM A27 steel in natural river water is investigated. This paper state the approach which has been used to enlighten the synergy between both phenomena. For this, a 20 kHz vibratory test according ASTM G32 standard is coupled to an electrochemical cell to be able to follow the different corrosion parameters during the tests to get evidence of the damaging mechanism. Moreover, mass losses have been followed during the exposure time. The classical degradation parameters (cumulative weight loss and erosion rate) are determined. Furthermore, a particular effort has been implemented to determine the evolution of surface damages in terms of pitting, surface cracking, material removal and surface corrosion. For this, scanning electron microscopy has been used to link the microstructure to the material removal mechanisms

  11. Fifth joint meeting of the American Urological Association and the Japanese Urological Association International Affiliate Society Meeting at the 105th Annual Meeting of the American Urological Association.

    Science.gov (United States)

    Myers, Robert P; Seki, Narihito; Gotoh, Momokazu; Chai, Toby C; Kaplan, Steven A; Inoue, Keiji; Trachtenberg, John; Kikuchi, Eiji; Nishiyama, Hiroyuki; Chang, Sam S; Lee, Cheryl; Muto, Satoru; Ito, Kazuto; Andriole, Gerald L; Eto, Masatoshi; Sumitomo, Makoto; Kamba, Tomomi; Wood, Chrsitopher G; Margulis, Vitaly; Naito, Seiji; Egawa, Shin

    2010-08-01

    We are heartily grateful for the warm support of all of the people concerned, including the moderators and panelists of both societies for giving us the opportunity to hold the 5(th) American Urological Association/Japanese Urological Association (AUA/JUA) International Affiliate Society Meeting, held once again at the 105th Annual Meeting of the American Urological Association (29 May-3 June 2010, San Francisco, California, USA). The year of 2010 is a memorable one, being the start of reciprocal collaborations between the AUA and the JUA. The JUA, in collaboration with the AUA, is promoting an academic exchange program whereby outstanding and promising Japanese and American junior faculty members will be given the opportunity to work in the USA and Japan for 1 month. The program not only allows the sharing of knowledge and experience, but also is designed to foster a closer alliance between the AUA and JUA, and assists in identifying future leaders within both organizations. The AUA and JUA will have an exhibit booth at each other's annual meeting, promoting our new joint activities. Both the JUA and AUA will organize educational courses in Hawaii in 2011. With all of these activities, the JUA hopes it will provide greater opportunities for young Japanese urologists to participate in educational projects in the USA. We would like to thank Professor Anton J. Bueschen, President of AUA, Professor Robert C Flanigan, Secretary General of AUA and the staff of the AUA and JUA for supporting our program. At the same time, we need the support of all the members and their valuable suggestions. We look forward to further participation of AUA members to this meeting. Seiji Naito md, President of JUA Shin Egawa md, Chairman of the International Committee of JUA.

  12. The Department of Energy/American Chemical Society Summer School in Nuclear and Radiochemistry at San Jose State University

    International Nuclear Information System (INIS)

    Kinard, W.F.; Silber, H.B.

    2005-01-01

    A Summer School in Nuclear Chemistry sponsored by the U. S. Department of Energy and the American Chemical Society has been held at San Jose State University for the past 20 years. The intent of the program is to introduce outstanding college students to the field of nuclear and radiochemistry with the goal that some of these students will consider careers on nuclear science. The program features radiochemistry experiments along with radiation safety training, guest lectures by well known nuclear scientists and field trips to nuclear chemistry facilities in the San Francisco area. (author)

  13. 46 CFR 42.05-60 - Recognized classification society.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Recognized classification society. 42.05-60 Section 42... FOREIGN VOYAGES BY SEA Definition of Terms Used in This Subchapter § 42.05-60 Recognized classification society. The term recognized classification society means the American Bureau of Shipping or other...

  14. 46 CFR 90.10-35 - Recognized classification society.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Recognized classification society. 90.10-35 Section 90... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 90.10-35 Recognized classification society. The term recognized classification society means the American Bureau of Shipping or other...

  15. An American Paradox: Hunger in an Affluent Society

    Science.gov (United States)

    McGovern, George S.

    1974-01-01

    Nutritionally vulnerable mothers and children, American Indians and Alaskan Natives, migrant laborers, and the elderly are described as the hungry in America. Additional and more effective government food programs are proposed as the solution. (DE)

  16. Development of ASTM Standard for SiC-SiC Joint Testing Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, George [General Atomics, San Diego, CA (United States); Back, Christina [General Atomics, San Diego, CA (United States)

    2015-10-30

    As the nuclear industry moves to advanced ceramic based materials for cladding and core structural materials for a variety of advanced reactors, new standards and test methods are required for material development and licensing purposes. For example, General Atomics (GA) is actively developing silicon carbide (SiC) based composite cladding (SiC-SiC) for its Energy Multiplier Module (EM2), a high efficiency gas cooled fast reactor. Through DOE funding via the advanced reactor concept program, GA developed a new test method for the nominal joint strength of an endplug sealed to advanced ceramic tubes, Fig. 1-1, at ambient and elevated temperatures called the endplug pushout (EPPO) test. This test utilizes widely available universal mechanical testers coupled with clam shell heaters, and specimen size is relatively small, making it a viable post irradiation test method. The culmination of this effort was a draft of an ASTM test standard that will be submitted for approval to the ASTM C28 ceramic committee. Once the standard has been vetted by the ceramics test community, an industry wide standard methodology to test joined tubular ceramic components will be available for the entire nuclear materials community.

  17. An Official American Thoracic Society Research Statement: Implementation Science in Pulmonary, Critical Care, and Sleep Medicine.

    Science.gov (United States)

    Weiss, Curtis H; Krishnan, Jerry A; Au, David H; Bender, Bruce G; Carson, Shannon S; Cattamanchi, Adithya; Cloutier, Michelle M; Cooke, Colin R; Erickson, Karen; George, Maureen; Gerald, Joe K; Gerald, Lynn B; Goss, Christopher H; Gould, Michael K; Hyzy, Robert; Kahn, Jeremy M; Mittman, Brian S; Mosesón, Erika M; Mularski, Richard A; Parthasarathy, Sairam; Patel, Sanjay R; Rand, Cynthia S; Redeker, Nancy S; Reiss, Theodore F; Riekert, Kristin A; Rubenfeld, Gordon D; Tate, Judith A; Wilson, Kevin C; Thomson, Carey C

    2016-10-15

    Many advances in health care fail to reach patients. Implementation science is the study of novel approaches to mitigate this evidence-to-practice gap. The American Thoracic Society (ATS) created a multidisciplinary ad hoc committee to develop a research statement on implementation science in pulmonary, critical care, and sleep medicine. The committee used an iterative consensus process to define implementation science and review the use of conceptual frameworks to guide implementation science for the pulmonary, critical care, and sleep community and to explore how professional medical societies such as the ATS can promote implementation science. The committee defined implementation science as the study of the mechanisms by which effective health care interventions are either adopted or not adopted in clinical and community settings. The committee also distinguished implementation science from the act of implementation. Ideally, implementation science should include early and continuous stakeholder involvement and the use of conceptual frameworks (i.e., models to systematize the conduct of studies and standardize the communication of findings). Multiple conceptual frameworks are available, and we suggest the selection of one or more frameworks on the basis of the specific research question and setting. Professional medical societies such as the ATS can have an important role in promoting implementation science. Recommendations for professional societies to consider include: unifying implementation science activities through a single organizational structure, linking front-line clinicians with implementation scientists, seeking collaborations to prioritize and conduct implementation science studies, supporting implementation science projects through funding opportunities, working with research funding bodies to set the research agenda in the field, collaborating with external bodies responsible for health care delivery, disseminating results of implementation

  18. The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

    Directory of Open Access Journals (Sweden)

    Mohammed Sabbar Abdulbaqi

    2017-12-01

    Full Text Available Saul Bellow (1915 –2005 is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976. He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956 in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand and the husband and wife on the other hand. The study aims to recognize to what extent materialism represents a dispersed element for the family unit.

  19. Hispanic immigrants and bilingual education after proposition 227 : a case study of attitudes about language and culture in American Society

    OpenAIRE

    小林, ひろみ

    2009-01-01

    Public criticism of bilingual education or bilingualism in the United States has been growing since the early 1990s. As part of the argument against bilingual education, Hispanic immigrants have been portrayed as a monolithic group clinging to their own language and culture and reluctant to assimilate into American society. Proposition 227, which officially ended bilingual education programs in California public schools, was passed on June 2, 1998. Race and ethnicity were reflected in the ...

  20. Readability of sports medicine-related patient education materials from the American Academy of Orthopaedic Surgeons and the American Orthopaedic Society for Sports Medicine.

    Science.gov (United States)

    Ganta, Abhishek; Yi, Paul H; Hussein, Khalil; Frank, Rachel M

    2014-04-01

    Although studies have revealed high readability levels of orthopedic patient education materials, no study has evaluated sports medicine-related patient education materials. We conducted a study to assess the readability of sports medicine-related patient education materials from the American Academy of Orthopaedic Surgeons (AAOS) and the American Orthopaedic Society for Sports Medicine (AOSSM). All sports medicine patient education articles available online in 2012 from the AAOS and the AOSSM, including the Stop Sports Injuries Campaign (STOP), were identified, and their readability was assessed with the Flesch-Kinkaid (FK) readability test. Mean overall FK grade level of the 170 articles reviewed (104 from AAOS, 36 from AOSSM, 30 from STOP) was 10.2. Mean FK levels for the 3 sources were 9.5 (AAOS), 11.0 (AOSSM), and 11.5 (STOP) (P = .16). Fifteen (8.8%) of the 170 articles had a readability level at or below eighth grade (average reading level of US adults); only 2 (1.2%) of the 170 articles were at or below the recommended sixth-grade level. The majority of sports medicine-related patient education materials from AAOS and AOSSM had reading levels higher than recommended, indicating that the majority of the patient population may find it difficult to comprehend these articles.

  1. Corrosion resistance and microstructure of alloy 625 weld overlay on ASTM A516 grade 70

    Energy Technology Data Exchange (ETDEWEB)

    Moradi, Mohammad J. [Amirkabir Univ. of Technology, Tehran (Iran, Islamic Republic of). Petroleum Engineering Dept.; Ketabchi, Mostafa [Amirkabir Univ. of Technology, Tehran (Iran, Islamic Republic of). Mining and Metallurgical Engineering Dept.

    2016-02-01

    Nickel-based alloys are a crucial class of materials because of their excellent corrosion resistance. In the present study, single layer and two layers alloy 625 weld overlays were deposited by GTAW process on A516 grade 70 carbon steel. The dilution in terms of Fe, Ni, Mo and Nb content was calculated in 30 points of weld overlay. Microstructure observations showed that alloy 625 had austenitic structure with two types of Laves and NbC secondary phases. The uniform and pitting corrosion resistance of alloy 625 weld overlay as casted and as forged were evaluated in accordance with ASTM G48-2011 standard at different temperatures to determine the weight loss and critical pitting temperature. For achieving a better comparison, samples from alloy 625 as casted and as forged were tested under the same conditions. The results point out that single layer alloy 625 weld overlay is not suitable for chloride containing environments, two layers alloy 625 weld overlay and alloy 625 as casted have acceptable corrosion resistance and almost the same critical pitting temperature. Alloy 625 as forged has the best corrosion resistance and the highest critical pitting temperature among all test specimens. Also, the corrosion behavior was evaluated in accordance with ASTM G28 standard. The corrosion rate of single layer weld overlay was unacceptable. The average corrosion rate of two layers weld overlay and in casted condition were 35.82 and 33.01 mpy, respectively. [German] Nickellegierungen sind aufgrund ihres exzellenten Korrosionswiderstandes eine bedeutende Werkstoffklasse. In der diesem Beitrag zugrunde liegenden Studie wurden mittels WIG-Schweissens ein- und zweilagige Schweissplattierungen auf den Kohlenstoffstahl A516 (Grade 70) aufgebracht. Die Vermischung in Form des Fe-, Ni-, Mo- und Nb-Gehaltes wurde an 30 Punkten der Schweissplattierungen berechnet. Die mikrostrukturellen Untersuchungen ergaben, dass die Legierung 625 eine austenitische Struktur mit zwei Arten von

  2. Who's making global civil society: philanthropy and US empire in world society.

    Science.gov (United States)

    Vogel, Ann

    2006-12-01

    Theories of US hegemony commonly ignore the role of American philanthropy in the contemporary transformations of world society and the globalization of capitalism. In this essay, I suggest that the philanthropic foundation, and with it the institution of philanthropy, is being invigorated by the expansion of its domestic role to foreign activities and to globally framed activities within the USA. I propose that US philanthropy exports American understandings of democracy and simultaneously organizes global reflexivity through citizenship education for the US populace. I offer a preliminary theoretical interpretation of the empirical patterns of international grant-making activities by US foundations, considering John W. Meyer's concept of 'instrumental culture' and some arguments made by Foucauldian 'governmentality' scholars. I emphasize the need to conceptualize the cultural-symbolic and organizational dimensions of hegemony and suggest further sociological analysis of philanthropic activities as integral to current politically and economically led transformations of societies around the globe.

  3. ASTM F739 method for testing the permeation resistance of protective clothing materials: critical analysis with proposed changes in procedure and test-cell design.

    Science.gov (United States)

    Anna, D H; Zellers, E T; Sulewski, R

    1998-08-01

    ASTM (American Society for Testing and Materials) Method F739-96 specifies a test-cell design and procedures for measuring the permeation resistance of chemical protective clothing. Among the specifications are open-loop collection stream flow rates of 0.050 to 0.150 L/min for a gaseous medium. At elevated temperatures the test must be maintained within 1 degree C of the set point. This article presents a critical analysis of the effect of the collection stream flow rate on the measured permeation rate and on the temperature uniformity within the test cell. Permeation tests were conducted on four polymeric glove materials with 44 solvents at 25 degrees C. Flow rates > 0.5 L/min were necessary to obtain accurate steady-state permeation rate (SSPR) values in 25 percent of the tests. At the lower flow rates the true SSPR typically was underestimated by a factor of two or less, but errors of up to 33-fold were observed. No clear relationship could be established between the need for a higher collection stream flow rate and either the vapor pressure or the permeation rate of the solvent, but test results suggest that poor mixing within the collection chamber was a contributing factor. Temperature gradients between the challenge and collection chambers and between the bottom and the top of the collection chamber increased with the water-bath temperature and the collection stream flow rate. Use of a test cell modified to permit deeper submersion reduced the gradients to < or = 0.5 degrees C. It is recommended that all SSPR measurements include verification of the adequacy of the collection stream flow rate. For testing at nonambient temperatures, the modified test cell described here could be used to ensure temperature uniformity throughout the cell.

  4. Summary of presentations from the 46th Annual Meeting of the American Society of Clinical Oncology: focus on non-small cell lung cancer (2010).

    Science.gov (United States)

    Stinchcombe, Thomas E; Baggstrom, Maria Q; Somaiah, Neeta; Simon, George R; Govindan, Ramaswamy

    2011-01-01

    The promising results of crizotinib in molecularly selected patients with advanced non-small cell lung cancer (NSCLC) whose tumor cells had a novel fusion protein involving anaplastic lymphoma kinase presented at the 2010 American Society of Clinical Oncology reinforce once again the importance of understanding molecular heterogeneity of lung cancer and careful patient selection. Several other important issues were the subject of presentations related to lung cancer at the recently concluded American Society of Clinical Oncology annual meeting. The articles covered a wide variety of topics including optimal staging techniques to detect mediastinal nodal involvement, the role of platinum-based doublet chemotherapy in the management of elderly patients with advanced NSCLC, use of maintenance therapy with gemcitabine, and the impact of early introduction of organized palliative care in improving the quality of life of patients with advanced NSCLC. This report provides a brief overview of the presentations related to lung cancer that are relevant to clinical practice and future research.

  5. Improved ASTM G72 Test Method for Ensuring Adequate Fuel-to-Oxidizer Ratios

    Science.gov (United States)

    Juarez, Alfredo; Harper, Susana Tapia

    2016-01-01

    The ASTM G72/G72M-15 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment is currently used to evaluate materials for the ignition susceptibility driven by exposure to external heat in an enriched oxygen environment. Testing performed on highly volatile liquids such as cleaning solvents has proven problematic due to inconsistent test results (non-ignitions). Non-ignition results can be misinterpreted as favorable oxygen compatibility, although they are more likely associated with inadequate fuel-to-oxidizer ratios. Forced evaporation during purging and inadequate sample size were identified as two potential causes for inadequate available sample material during testing. In an effort to maintain adequate fuel-to-oxidizer ratios within the reaction vessel during test, several parameters were considered, including sample size, pretest sample chilling, pretest purging, and test pressure. Tests on a variety of solvents exhibiting a range of volatilities are presented in this paper. A proposed improvement to the standard test protocol as a result of this evaluation is also presented. Execution of the final proposed improved test protocol outlines an incremental step method of determining optimal conditions using increased sample sizes while considering test system safety limits. The proposed improved test method increases confidence in results obtained by utilizing the ASTM G72 autogenous ignition temperature test method and can aid in the oxygen compatibility assessment of highly volatile liquids and other conditions that may lead to false non-ignition results.

  6. Autoimmune Retinopathy: Current Concepts and Practices (An American Ophthalmological Society Thesis).

    Science.gov (United States)

    Sen, H Nida; Grange, Landon; Akanda, Marib; Fox, Austin

    2017-08-01

    To elicit and evaluate opinions in the diagnosis and management of nonparaneoplastic autoimmune retinopathy (npAIR) among members of the American Uveitis Society (AUS) and to further the development of consensus and criteria in the diagnosis and management of npAIR. We hypothesize that despite lack of any clear guidelines, a general consensus in the clinical diagnosis and treatment of npAIR exists among uveitis experts. A literature review was performed and a panel of uveitis experts was consulted to formulate a survey regarding the diagnosis and management of npAIR. An online survey of 10 questions was developed, and a link was distributed through the AUS membership discussion list. We defined "general consensus" as meaning that a majority (>50%) of the respondents provided the same answer to a question. Fifty-four members of the AUS responded to the survey. Thirty-eight members (70.4%) see one to three AIR patients per year. Greater than 50% consensus was reached on most items, particularly items relating to diagnostic features and tests (up to 96% consensus). The diagnosis and management of npAIR is challenging, as standardized clinical and laboratory diagnostic criteria have yet to be established. The results of this study support the presence of consensus regarding certain aspects of npAIR, but also indicate the need for developing clear clinical diagnostic criteria and treatment guidelines.

  7. Mobile Robot and Mobile Manipulator Research Towards ASTM Standards Development.

    Science.gov (United States)

    Bostelman, Roger; Hong, Tsai; Legowik, Steven

    2016-01-01

    Performance standards for industrial mobile robots and mobile manipulators (robot arms onboard mobile robots) have only recently begun development. Low cost and standardized measurement techniques are needed to characterize system performance, compare different systems, and to determine if recalibration is required. This paper discusses work at the National Institute of Standards and Technology (NIST) and within the ASTM Committee F45 on Driverless Automatic Guided Industrial Vehicles. This includes standards for both terminology, F45.91, and for navigation performance test methods, F45.02. The paper defines terms that are being considered. Additionally, the paper describes navigation test methods that are near ballot and docking test methods being designed for consideration within F45.02. This includes the use of low cost artifacts that can provide alternatives to using relatively expensive measurement systems.

  8. American Thoracic Society member survey on climate change and health.

    Science.gov (United States)

    Sarfaty, Mona; Bloodhart, Brittany; Ewart, Gary; Thurston, George D; Balmes, John R; Guidotti, Tee L; Maibach, Edward W

    2015-02-01

    The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed a random sample of ATS members to assess their perceptions of, clinical experiences with, and preferred policy responses to climate change. An e-mail containing an invitation from the ATS President and a link to an online survey was sent to 5,500 randomly selected U.S. members; up to four reminder e-mails were sent to nonrespondents. Responses were received from members in 49 states and the District of Columbia (n = 915); the response rate was 17%. Geographic distribution of respondents mirrored that of the sample. Survey estimates' confidence intervals were ±3.5% or smaller. Results indicate that a large majority of ATS members have concluded that climate change is happening (89%), that it is driven by human activity (68%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (65%). A majority of respondents indicated they were already observing health impacts of climate change among their patients, most commonly as increases in chronic disease severity from air pollution (77%), allergic symptoms from exposure to plants or mold (58%), and severe weather injuries (57%). A larger majority anticipated seeing these climate-related health impacts in the next 2 decades. Respondents indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. Overall, ATS members are observing that human health is already adversely affected by climate change and support responses to address this situation.

  9. Validation of the Infectious Diseases Society of America/American Thoracic Society criteria to predict severe community-acquired pneumonia caused by Streptococcus pneumoniae.

    Science.gov (United States)

    Kontou, Paschalina; Kuti, Joseph L; Nicolau, David P

    2009-10-01

    Severe community-acquired pneumonia (CAP) is usually defined as pneumonia that requires intensive care unit (ICU) admission; the primary pathogen responsible for ICU admission is Streptococcus pneumoniae. In this study, the 2007 Infectious Diseases Society of America/American Thoracic Society (IDSA/ATS) consensus criteria for ICU admission were compared with other severity scores in predicting ICU admission and mortality. We retrospectively studied 158 patients with pneumococcal CAP (1999-2003). Clinical and laboratory features at the emergency department were recorded and used to calculate the 2007 IDSA/ATS rule, the 2001 ATS rule, 2 modified 2007 IDSA/ATS rules, the Pneumonia Severity Index (PSI), and the CURB (confusion, urea, respiratory rate, blood pressure) score. The sensitivity, specificity, positive predictive value, and negative predictive value (NPV) were assessed for the various indices. We also determined the criteria that were independently predictive of ICU admission and of mortality in our population. The 2007 IDSA/ATS criteria performed as well as the 2001 ATS rule in predicting ICU admission both demonstrated high sensitivity (90%) and NPV (97%). For the prediction of mortality, the best tool proved to be the PSI score (sensitivity, 95%; NPV, 99%). The variables associated with ICU admission in this patient population included tachypnea, confusion, Pao(2)/Fio(2) ratio of 250 or lower, and hypotension requiring fluid resuscitation. Mechanical ventilation and PSI class V were independently associated with mortality. This study confirms the usefulness of the new criteria in predicting severe CAP. The 2001 ATS criteria seem an attractive alternative because they are simple and as effective as the 2007 IDSA/ATS criteria.

  10. Status on the selection and development of an embrittlement trend curve to use in ASTM standard guide E900

    International Nuclear Information System (INIS)

    Kirk, M.; Brian Hall, J.; Server, W.; Lucon, E.; Erickson, M.; Stoller, R.

    2015-01-01

    ASTM E900-07, Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, includes an embrittlement trend curve. The trend curve can be used to predict the effect of neutron irradiation on the embrittlement of ferritic pressure vessel steels, as quantified by the shift in the Charpy V-Notch transition curve at 41 Joules of absorbed energy (ΔT 41J ). The current E900 trend curve was first adopted in the 2002 revision. In 2011 ASTM Subcommittee E10.02 undertook an extensive effort to evaluate the adequacy of the E900 trend curve for continued use. This paper summarizes the current status of this effort, which has produced a trend curve calibrated using a database of over 1800 ΔT 41J values from the light water reactor surveillance programs in thirteen countries. (authors)

  11. An official American Thoracic Society/International Society for Heart and Lung Transplantation/Society of Critical Care Medicine/Association of Organ and Procurement Organizations/United Network of Organ Sharing Statement: ethical and policy considerations in organ donation after circulatory determination of death.

    Science.gov (United States)

    Gries, Cynthia J; White, Douglas B; Truog, Robert D; Dubois, James; Cosio, Carmen C; Dhanani, Sonny; Chan, Kevin M; Corris, Paul; Dark, John; Fulda, Gerald; Glazier, Alexandra K; Higgins, Robert; Love, Robert; Mason, David P; Nakagawa, Thomas A; Shapiro, Ron; Shemie, Sam; Tracy, Mary Fran; Travaline, John M; Valapour, Maryam; West, Lori; Zaas, David; Halpern, Scott D

    2013-07-01

    Donation after circulatory determination of death (DCDD) has the potential to increase the number of organs available for transplantation. Because consent and management of potential donors must occur before death, DCDD raises unique ethical and policy issues. To develop an ethics and health policy statement on adult and pediatric DCDD relevant to critical care and transplantation stakeholders. A multidisciplinary panel of stakeholders was convened to develop an ethics and health policy statement. The panel consisted of representatives from the American Thoracic Society, Society of Critical Care Medicine, International Society for Heart and Lung Transplantation, Association of Organ Procurement Organizations, and the United Network of Organ Sharing. The panel reviewed the literature, discussed important ethics and health policy considerations, and developed a guiding framework for decision making by stakeholders. A framework to guide ethics and health policy statement was established, which addressed the consent process, pre- and post mortem interventions, the determination of death, provisions of end-of-life care, and pediatric DCDD. The information presented in this Statement is based on the current evidence, experience, and clinical rationale. New clinical research and the development and dissemination of new technologies will eventually necessitate an update of this Statement.

  12. The Influence of Biblical Culture on American Spiritual Civilization

    Institute of Scientific and Technical Information of China (English)

    李惠子

    2014-01-01

    Biblical culture is deeply rooted into current American society and culture,widely impacting every aspect of American people’s life.Through discussing about the historical accumulation of biblical culture reflected in America’s societal and spiritual civilization,this essay analyses the importance and function of biblical culture from the aspect of society inheritance,value,literature creation and customs etc.,helping us to further understand and study American society and culture.

  13. The Influence of Biblical Culture on American Spiritual Civilization

    Institute of Scientific and Technical Information of China (English)

    李惠子

    2014-01-01

    Biblical culture is deeply rooted into current American society and culture, widely impacting every aspect of American people’s life. Through discussing about the historical accumulation of biblical culture reflected in America’s societal and spiritual civilization, this essay analyses the importance and function of biblical culture from the aspect of society inheritance, value, literature creation and customs etc., helping us to further understand and study American society and culture.

  14. Anodic Protection performance of Steels ASTM A 516-60 And JIS G 3131 SPHC In Concentrated Sulfuric Acid

    International Nuclear Information System (INIS)

    Harsisto; Ginting, Immanuel; Eddy, D.C

    2001-01-01

    One of the methods to protect a carbon steel material from corrosion attack of sulfuric acid environment is with anodic protection. This research was intended to investigate the effect of anodic protection quickened with potential polarization, The material under investigation were ASTM A 516 and JIS G 3131-SPHC in highly concentrated H 2 SO 4 solution. The results showed that potential that was effective for anodic protection in ASTM A 516-60 were at 236-436 mV for 75%, 276-476 mV for 80%, 264-514 mV for 85%,285-485 mV for 90%, and 231-431 mV for 97% H 2 SO 4 so that in JlS G 3131-SPHC were at 303 -503 mV for 75%, 290-490 mV for 80%, 269- 516 mV for 85%, 264-514 mV for 90%, and 287 -487 mV for 97% H 2 SO 4

  15. America's Scholarly Societies Raise Their Flags Abroad.

    Science.gov (United States)

    McMurtrie, Beth

    2000-01-01

    Reports that greater numbers of scholarly societies, though American in name, are increasingly international in membership and outlook. Suggests that this trend has been driven by the expanding global outlook of scholars, the collapse of communism, and growth of the Internet. Efforts to encourage local professional societies, fears of American…

  16. Effect of C content on the mechanical properties of solution treated as-cast ASTM F-75 alloys.

    Science.gov (United States)

    Herrera, M; Espinoza, A; Méndez, J; Castro, M; López, J; Rendón, J

    2005-07-01

    The mechanical properties of solution treated ASTM F-75 alloys with various carbon contents have been studied. Alloys cast under the same conditions were subjected to solution treatment for several periods and then their tensile properties were evaluated. In the as-cast conditions, the alloys exhibited higher strength values with increasing carbon content whereas their ductility was not significantly affected. For the solution treated alloys, the variation of the strength was characterized by a progressive increase for short treatment times until a maximum value was achieved, which was followed by a diminution in this property for longer treatment times. This behavior was more accentuated for the case of the alloys with medium carbon contents, which also exhibited the highest values of strength. Furthermore, the alloy's ductility was enhanced progressively with increasing solution treatment time. This improvement in ductility was significantly higher for the medium carbon alloys compared with the rest of the studied alloys. Thus, high and low carbon contents in solution treated ASTM F-75 alloys did not produced sufficiently high tensile properties.

  17. Women otolaryngologist representation in specialty society membership and leadership positions.

    Science.gov (United States)

    Choi, Sukgi S; Miller, Robert H

    2012-11-01

    To determine the proportion of female otolaryngologists in leadership positions relative to their number in the specialty, their membership in various otolaryngology organizations, and age. Cross-sectional analyses of otolaryngology organization membership with a subgroup analysis on female membership and leadership proportion comparing 5-year male/female cohort groups. Information on the number of members and leaders was obtained from various specialty societies by direct communication and from their Web sites between June and December 2010. The number of female and male otolaryngologists and their age distribution in 5-year age groups was obtained from the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS). Statistical analyses were used to determine whether women had proportional membership and leadership representation in various specialty societies. Additionally, female representation in other leadership roles was analyzed using the male/female ratio within the 5-year cohort groups. Female otolaryngologists were found to constitute approximately 11% of practicing otolaryngologists. The American Society of Pediatric Otolaryngology had a higher proportion of female members (22%) compared to five other societies. When the gender composition within each organization was taken into account, female representation in specialty society leadership positions was proportionate to their membership across all societies. When gender and age were considered, women have achieved proportionate representation in each of the specialty societies' leadership positions. There was also proportionate representation of females as program directors, American Board of Otolaryngology directors, Residency Review Committee members, and journal editors/editorial board members. Finally, fewer female chairs or chiefs of departments/divisions were seen, but when age was taken into consideration, this difference was no longer significant. Women have achieved parity in

  18. NAVFAC Ocean Thermal Energy Conversion (OTEC) Project; OTEC Technology Development Report

    Science.gov (United States)

    2010-11-01

    INSIDE FACE OF THE PLATE MUST BE SMOOTH AND FREE FROM WELD SLAG . 9255 WELLINGTON ROAD MANASSAS, VA 20110-4121LOCKHEED MARTIN NAVAL FACILITIES...document by their basic designation number shown below: A. A36 Structural Steel American Society for Testing and Materials (ASTM): A123 Zinc (Hot...Galvanized) Coatings on Iron and Steel Products A153 Zinc Coating (Hot Dip) On Iron and Steel Hardware A307 Specification for Carbon Steel Bolts and

  19. Vapor Pressure and Predicted Stability of American Contact Dermatitis Society Core Allergens

    Science.gov (United States)

    Jou, Paul C.; Siegel, Paul D.; Warshaw, Erin M.

    2018-01-01

    Background Accurate patch testing is reliant on proper preparation of patch test allergens. The stability of patch test allergens is dependent on several factors including vapor pressure (VP). Objective This investigation reviews the VP of American Contact Dermatitis Society Core Allergens and compares stability predictions based on VP with those established through clinical testing. Methods Standard references were accessed for determining VP in millimeters of mercury and associated temperature in degrees celsius. If multiple values were listed, VP at temperatures that most approximate indoor storage conditions (20°C and 25°C) were chosen. For mixes, the individual component with the highest VP was chosen as the overall VP, assuming that the most volatile substance would evaporate first. Antigens were grouped into low (≤0.001 mm Hg), moderate (0.001 mm Hg), and high (≥1 mm Hg) volatility using arbitrary cutoff values. Conclusions This review is consistent with previously reported data on formaldehyde, acrylates, and fragrance material instability. Given lack of testing data, VP can be useful in predicting patch test compound stability. Measures such as air-tight multidose reagent containers, sealed single-application dispensers, preparation of patches immediately before application, and storage at lower temperatures may remedy some of these issues. PMID:27427821

  20. New Strategies and Challenges in Lung Proteomics and Metabolomics. An Official American Thoracic Society Workshop Report.

    Science.gov (United States)

    Bowler, Russell P; Wendt, Chris H; Fessler, Michael B; Foster, Matthew W; Kelly, Rachel S; Lasky-Su, Jessica; Rogers, Angela J; Stringer, Kathleen A; Winston, Brent W

    2017-12-01

    This document presents the proceedings from the workshop entitled, "New Strategies and Challenges in Lung Proteomics and Metabolomics" held February 4th-5th, 2016, in Denver, Colorado. It was sponsored by the National Heart Lung Blood Institute, the American Thoracic Society, the Colorado Biological Mass Spectrometry Society, and National Jewish Health. The goal of this workshop was to convene, for the first time, relevant experts in lung proteomics and metabolomics to discuss and overcome specific challenges in these fields that are unique to the lung. The main objectives of this workshop were to identify, review, and/or understand: (1) emerging technologies in metabolomics and proteomics as applied to the study of the lung; (2) the unique composition and challenges of lung-specific biological specimens for metabolomic and proteomic analysis; (3) the diverse informatics approaches and databases unique to metabolomics and proteomics, with special emphasis on the lung; (4) integrative platforms across genetic and genomic databases that can be applied to lung-related metabolomic and proteomic studies; and (5) the clinical applications of proteomics and metabolomics. The major findings and conclusions of this workshop are summarized at the end of the report, and outline the progress and challenges that face these rapidly advancing fields.

  1. Standard test method for compressive strength of grouts for preplaced-aggregate concrete in the laboratory. ASTM standard

    International Nuclear Information System (INIS)

    1998-10-01

    DoD adopted. This test method is under the jurisdiction of ASTM Committee C-9 on Concrete and Concrete Aggregates and is the direct responsibility of Subcommittee C09.41 on Concrete for Radiation Shielding. Current edition approved Feb. 10, 1986 and published October 1998. Originally published as C 942-81. Last previous edition was C 942-86(1991)

  2. Standard test method for static leaching of monolithic waste forms for disposal of radioactive waste. ASTM standard

    International Nuclear Information System (INIS)

    1998-10-01

    This test method is under the jurisdiction of ASTM Committee C-26 on Nuclear Fuel Cycles and is the direct responsibility of Subcommittee C26.07 on Waste Materials. The current edition was approved July 10, 1998, and published in October 1998. It was originally published as C 1220-92. The last previous edition was C 1220-92

  3. Corrosion resistant properties and weldabilities of ASTM Grade 12 titanium alloy

    International Nuclear Information System (INIS)

    Tsumori, Yoshikatsu; Itoh, Hideo

    1988-01-01

    Plates, sheets, bars, wires and thinner seam-welded tubings were manufactured from large-scaled ingot of ASTM Grade 12 alloy (Ti-0.8Ni-0.3Mo). The processability of G-12 alloy has proved almost similar to that of conventional commercially pure titanium grades. It has been clarified that the G-12 alloy showed several advantageous features: Chlorides-Crevice corrosion resistance of the alloy was almost equals to G-7 and Pd0/TiO 2 coated titanium, and the maximum allowable stress was able to be designed higher than that of commercially pure titanium. This alloy has been in applications also offers where such environments as seawater, brines and moist chlorine, various oil refinery and chemical industries, and others. (author)

  4. The American Society of Shoulder and Elbow Therapists' consensus statement on rehabilitation following arthroscopic rotator cuff repair.

    Science.gov (United States)

    Thigpen, Charles A; Shaffer, Michael A; Gaunt, Bryce W; Leggin, Brian G; Williams, Gerald R; Wilcox, Reg B

    2016-04-01

    This is a consensus statement on rehabilitation developed by the American Society of Shoulder and Elbow Therapists. The purpose of this statement is to aid clinical decision making during the rehabilitation of patients after arthroscopic rotator cuff repair. The overarching philosophy of rehabilitation is centered on the principle of the gradual application of controlled stresses to the healing rotator cuff repair with consideration of rotator cuff tear size, tissue quality, and patient variables. This statement describes a rehabilitation framework that includes a 2-week period of strict immobilization and a staged introduction of protected, passive range of motion during weeks 2-6 postoperatively, followed by restoration of active range of motion, and then progressive strengthening beginning at postoperative week 12. When appropriate, rehabilitation continues with a functional progression for return to athletic or demanding work activities. This document represents the first consensus rehabilitation statement developed by a multidisciplinary society of international rehabilitation professionals specifically for the postoperative care of patients after arthroscopic rotator cuff repair. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  5. Data development for ASTM E24.06.02 round robin program on instability prediction

    Science.gov (United States)

    Mccabe, D. E.

    1979-01-01

    Basis data for use in an ASTM E24.06.02 task group round robin activity was developed. Compact specimens were made of 2024-T351, 7075-T651 aluminum alloys, and 304 stainless steel. All were 12.7 mm thick and planar dimension variables incorporated were for 1T, 2T and 4T sizes. Representative raw data for each material and specimen size are contained herein. R-curves plotted in terms of delta a physical and delta a effective are plotted for each material.

  6. Psychological Aspects of European Cosmology in American Society: African and European Cultures.

    Science.gov (United States)

    Baldwin, Joseph A.

    1985-01-01

    Discusses the Eurocentric nature of the United States social reality, and investigates psychological and mental health implications for the African-American community. Outlines the basic themes, emphases and criteria of Euro-American cosmology and describes how it can come to dominate the Afro-American's self-consciousness. Suggests ways to…

  7. Evaluation of American Indian Science and Engineering Society Intertribal Middle School Science and Math Bowl Project

    Energy Technology Data Exchange (ETDEWEB)

    AISES, None

    2013-09-25

    The American Indian Science and Engineering Society (AISES) has been funded under a U.S. Department of Energy (DOE) grant (Grant Award No. DE-SC0004058) to host an Intertribal Middle-School Science and Math Bowl (IMSSMB) comprised of teams made up of a majority of American Indian students from Bureau of Indian Education-funded schools and public schools. The intent of the AISES middle school science and math bowl is to increase participation of American Indian students at the DOE-sponsored National Science Bowl. Although national in its recruitment scope, the AISES Intertribal Science and Math Bowl is considered a “regional” science bowl, equivalent to the other 50 regional science bowls which are geographically limited to states. Most regional bowls do not have American Indian student teams competing, hence the AISES bowl is meant to encourage American Indian student teams to increase their science knowledge in order to participate at the national level. The AISES competition brings together teams from various American Indian communities across the nation. Each team is provided with funds for travel to and from the event, as well as for lodging and meals. In 2011 and 2012, there were 10 teams participating; in 2013, the number of teams participating doubled to 20. Each Science and Math Bowl team is comprised of four middle school — grades 6 through 8 — students, one alternate, and a teacher who serves as advisor and coach — although in at least two cases, the coach was not a teacher, but was the Indian Education Coordinator. Each team member must have at least a 3.0 GPA. Furthermore, the majority of students in each team must be comprised of American Indian, Alaska Native or Native Hawaiian students. Under the current DOE grant, AISES sponsored three annual middle school science bowl competitions over the years 2011, 2012 and 2013. The science and math bowls have been held in late March concurrently with the National American Indian Science and

  8. Assessment of wrought ASTM F1058 cobalt alloy properties for permanent surgical implants.

    Science.gov (United States)

    Clerc, C O; Jedwab, M R; Mayer, D W; Thompson, P J; Stinson, J S

    1997-01-01

    The behavior of the ASTM F1058 wrought cobalt-chromium-nickel-molybdenum-iron alloy (commonly referred to as Elgiloy or Phynox) is evaluated in terms of mechanical properties, magnetic resonance imaging, corrosion resistance, and biocompatibility. The data found in the literature, the experimental corrosion and biocompatibility results presented in this article, and its long track record as an implant material demonstrate that the cobalt superalloy is an appropriate material for permanent surgical implants that require high yield strength and fatigue resistance combined with high elastic modulus, and that it can be safely imaged with magnetic resonance.

  9. Glove powder's carrying capacity for latex protein: analysis using the ASTM ELISA test.

    Science.gov (United States)

    Beezhold, D; Horton, K; Hickey, V; Daddona, J; Kostyal, D

    2003-01-01

    Glove donning powders carry latex proteins and disperse them into the workplace environment. We have used the ASTM D6499 ELISA to quantify the amount of latex antigen bound to and carried by glove powders. We could differentiate between a small amount of protein actually bound to the powders and a larger amount carried by the powder. Enhanced binding of a major allergen, Hev b 5, to the starch powders was demonstrated by Western blot. The D6499 ELISA is able to measure total latex antigen, soluble and powder bound, simultaneously without the need to centrifuge the samples.

  10. Determination of ASTM 1016 structural welded joints fracture toughness through J integral

    International Nuclear Information System (INIS)

    Martins, Geraldo de Paula; Villela, Jefferson Jose; Terra, Jose Lucio; Rabello, Emerson Giovani; Martins, Geraldo Antonio Scoralick; Carneiro, Jose Rubens Goncalves

    2009-01-01

    Fracture toughness is an important parameter for studies of materials behavior in nuclear and conventional industry. Crack propagation resistance is, in general, evaluate using one of the fracture mechanics parameters K IC , for the case of the materials that exhibits a linear elastic behavior, the CTOD (crack tip opening displacement) and J IC , the critical value of J Integral, for the case of materials with elastic-plastic behavior. On this work the fracture mechanics parameters of the ASTM 1016 structural steel welded joints were obtained, using the J Integral. Charpy V tests at several temperatures were also obtained, with the purpose to obtain the curves of ductile-brittle of the regions of the welded joints: Base Metal, (MB), and Melted Zone (MZ). The joints were welded by Gas Metal Arc Welding (GMAW) with V bevel for evaluation the MZ toughness properties. The tests were accomplished at temperatures varying from -100 deg C to 100 deg C using the technical of compliance variation for J IC determination, the critical value that defines the initial stable crack growth, that applies to brittle and ductile materials. The J Integral alternative specimens has square cross section 10mmX10mm, according ASTM E 1820, with notch localized respectively at the BM and MZ. After the tests, the specimens fractured were analyzed in a scanning microscopic electronic (SME) for verification of the fracture surface. The fractography of the specimens at elevated temperatures presented dimples at the region of stable crack growth, characteristic of ductile fracture. The results of J Integral and Charpy V presented a good correlation between these two parameters. From these correlations it can be concluded that in some applications, the use Charpy V energy to infer fracture toughness can be substitute the Integral J tests. (author)

  11. Physical properties of sediments from the JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well

    Science.gov (United States)

    Winters, W.J.

    1999-01-01

    A 1150 m deep gas hydrate research well was drilled in the Canadian Arctic in February and March 1998 to investigate the interaction between the presence of gas hydrate and the natural conditions presented by the host sediments. Profiles of the following measured and derived properties are presented from that investigation: water content, sediment wet bulk density, grain size, porosity, gas hydrate quantity, and salinity. These data indicate that the greatest concentration of gas hydrate is located within sand and gravel deposits between 897 m and 922 m. American Society for Testing and Materials 1997: Standard test method for specific gravity of soil solids by gas pycnometer D 5550-94; in American Society for Testing and Materials, Annual Book of ASTM Standards, v. 04.09, Soil and Rock, West Conshohocken, Pennsylvania, p. 380-383.

  12. Success of an International Learning Health Care System in Hematopoietic Cell Transplantation: The American Society of Blood and Marrow Transplantation Clinical Case Forum.

    Science.gov (United States)

    Barba, Pere; Burns, Linda J; Litzow, Mark R; Juckett, Mark B; Komanduri, Krishna V; Lee, Stephanie J; Devlin, Sean M; Costa, Luciano J; Khan, Shakila; King, Andrea; Klein, Andreas; Krishnan, Amrita; Malone, Adriana; Mir, Muhammad; Moravec, Carina; Selby, George; Roy, Vivek; Cochran, Melissa; Stricherz, Melisa K; Westmoreland, Michael D; Perales, Miguel-Angel; Wood, William A

    2016-03-01

    The American Society for Blood and Marrow Transplantation (ASBMT) Clinical Case Forum (CCF) was launched in 2014 as an online secure tool to enhance interaction and communication among hematopoietic cell transplantation (HCT) professionals worldwide through the discussion of challenging clinical care issues. After 14 months, we reviewed clinical and demographical data of cases posted in the CCF from January 29, 2014 to March 18, 2015. A total of 137 cases were posted during the study period. Ninety-two cases (67%) were allogeneic HCT, 29 (21%) were autologous HCT, and in 16 (12%), the type of transplantation (autologous versus allogeneic) was still under consideration. The diseases most frequently discussed included non-Hodgkin lymphoma (NHL; n = 30, 22%), acute myeloid leukemia (n = 23, 17%), and multiple myeloma (MM; n = 20, 15%). When compared with the US transplantation activity reported by the US Department of Health and Human Services, NHL and acute lymphoblastic leukemia cases were over-represented in the CCF, whereas MM was under-represented (P educational and research perspectives. Copyright © 2016 American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

  13. The American Dream

    OpenAIRE

    Önnerth, Lars; Neubert, Mikkel; Omerbasic, Dejan; Heyman, Minch; Kimberly, Marie; Nielsen, Lyngbo; Mynte, Anne; Hørlyck Kaastrup, Markus

    2015-01-01

    This study examines the phenomenon that is the American Dream and its effect on the working and upper class citizens in American society. To give context to the American dream and its origin, we have made use of professor Jim Cullen’s book “The American Dream: A Short Story of an Idea that Shaped a Nation” from 2003. We have identified what we decided to call the “the traditional dream” and “the modern dream”, both representing different outlooks on lives and ethical standards. We have done t...

  14. View from the Top: Perspectives on Women in Gastroenterology from Society Leaders.

    Science.gov (United States)

    Schmitt, Colleen M; Allen, John I

    2016-06-01

    Women are making great strides at all levels of medicine, including gastroenterology. The proportion of women members in gastroenterology societies has increased nearly 2-fold and the percent of women trainees is 36%. Although there continue to be challenges for women in academic and community practice, the American Gastroenterological Association, American Society of Gastrointestinal Endoscopy, and other gastroenterology societies have dedicated substantial resources to foster careers of women in gastroenterology and develop women as leaders in our societies. This article outlines ongoing challenges for women in gastroenterology and some key initiatives addressing barriers to success. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Application of self-organizing feature maps to analyze the relationships between ignitable liquids and selected mass spectral ions.

    Science.gov (United States)

    Frisch-Daiello, Jessica L; Williams, Mary R; Waddell, Erin E; Sigman, Michael E

    2014-03-01

    The unsupervised artificial neural networks method of self-organizing feature maps (SOFMs) is applied to spectral data of ignitable liquids to visualize the grouping of similar ignitable liquids with respect to their American Society for Testing and Materials (ASTM) class designations and to determine the ions associated with each group. The spectral data consists of extracted ion spectra (EIS), defined as the time-averaged mass spectrum across the chromatographic profile for select ions, where the selected ions are a subset of ions from Table 2 of the ASTM standard E1618-11. Utilization of the EIS allows for inter-laboratory comparisons without the concern of retention time shifts. The trained SOFM demonstrates clustering of the ignitable liquid samples according to designated ASTM classes. The EIS of select samples designated as miscellaneous or oxygenated as well as ignitable liquid residues from fire debris samples are projected onto the SOFM. The results indicate the similarities and differences between the variables of the newly projected data compared to those of the data used to train the SOFM. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  16. Application of ASTM E-1559 Apparatus to Study H2O Desorption

    Science.gov (United States)

    Woronowicz, Michael; Perry, Radford, III; Meadows, George A.

    2015-01-01

    The NASA James Webb Space Telescope project identified a need to measure water vapor desorption from cryogenic surfaces in order to validate predictions of spacecraft design performance. A review of available scientific literature indicated no such measurements had been reported below 131 K. Contamination control personnel at NASA Goddard Space Flight Center recognized the possibility they readily possessed the means to collect these measurements at lower temperatures using an existing apparatus commonly employed for making outgassing observations. This presentation will relate how the ASTM E-1559 Molekit apparatus was used without physical modification to measure water vapor sublimation down to 120 K and compare this data to existing equilibrium vapor pressure models.

  17. Prevalence and interest in the practice of scratch testing for contact urticaria: a survey of the American contact dermatitis society members.

    Science.gov (United States)

    Orb, Quinn; Millsop, Jillian Wong; Harris, KaLynne; Powell, Douglas

    2014-01-01

    Contact urticaria (CU) is the development of a wheal and flare on the skin after topical exposure to a particular chemical or compound. It can be diagnosed through a variety of techniques. Many chemicals that cause a type IV allergy can also cause CU. The incidence of CU to these chemicals is unknown. The aim of this study was to evaluate the opinions of the American Contact Dermatitis Society members regarding CU and scratch testing. We distributed an electronic survey to the American Contact Dermatitis Society members regarding observed prevalence of CU, frequency of scratch testing in clinical practice, and interest in learning about scratch testing in diagnosing CU and other skin contact conditions. We distributed 508 surveys and received 133 responses. Seventeen percent reported that CU was extremely rare, 32% reported that CU was rare, and 38.9% reported that CU was infrequent. Alternatively, 10.7% believed that CU was common, and 1.5% believed that CU was extremely common. A minority, 19.1%, performed scratch testing on patients with suspected CU. Most respondents, 54.6%, were interested in learning about scratch testing. Additional education regarding scratch testing could increase comfort and use of scratch testing in clinical practice. Further studies are needed to evaluate the prevalence of CU in the general population and better guide the use of testing for dermatologic patients.

  18. Marks in Latin-American radiology

    International Nuclear Information System (INIS)

    Souza Almeida, S. de.

    1987-01-01

    An historical retrospective of Latin-American radiology is shortly presented. Several radiologic societies as well as personalities, scientists and doctors are reported emphasizing their contribuition to radiologic Latin-American culture. (M.A.C.) [pt

  19. Atypical subtrochanteric and diaphyseal femoral fractures: report of a task force of the American Society for Bone and Mineral Research

    DEFF Research Database (Denmark)

    Shane, Elizabeth; Burr, David; Ebeling, Peter R

    2010-01-01

    Reports linking long-term use of bisphosphonates (BPs) with atypical fractures of the femur led the leadership of the American Society for Bone and Mineral Research (ASBMR) to appoint a task force to address key questions related to this problem. A multidisciplinary expert group reviewed pertinent...... published reports concerning atypical femur fractures, as well as preclinical studies that could provide insight into their pathogenesis. A case definition was developed so that subsequent studies report on the same condition. The task force defined major and minor features of complete and incomplete...

  20. ASTM and VAMAS activities in titanium matrix composites test methods development

    Science.gov (United States)

    Johnson, W. S.; Harmon, D. M.; Bartolotta, P. A.; Russ, S. M.

    1994-01-01

    Titanium matrix composites (TMC's) are being considered for a number of aerospace applications ranging from high performance engine components to airframe structures in areas that require high stiffness to weight ratios at temperatures up to 400 C. TMC's exhibit unique mechanical behavior due to fiber-matrix interface failures, matrix cracks bridged by fibers, thermo-viscoplastic behavior of the matrix at elevated temperatures, and the development of significant thermal residual stresses in the composite due to fabrication. Standard testing methodology must be developed to reflect the uniqueness of this type of material systems. The purpose of this paper is to review the current activities in ASTM and Versailles Project on Advanced Materials and Standards (VAMAS) that are directed toward the development of standard test methodology for titanium matrix composites.

  1. Native American youth and justice

    Directory of Open Access Journals (Sweden)

    Dr.Sc. Laurence A. French

    2012-12-01

    Full Text Available Youth and delinquency issues have long been problematic among Native Americans groups both on- and off-reservation. This phenomenon is further complicated by the cultural diversity among American Indians and Alaska Natives scattered across the United States. In address these issues, the paper begins with a historical overview of Native American youth. This history presents the long tradition of federal policies that, how well intended, have resulted in discriminatory practices with the most damages attacks being those directed toward the destruction of viable cultural attributes – the same attributes that make Native Americans unique within United States society. Following the historical material, the authors contrast the pervasive Native American aboriginal ethos of harmony with that of Protestant Ethic that dominates the ethos of the larger United States society. In addition to providing general information on Native American crime and delinquency, the paper also provides a case study of Native American justice within the Navajo Nation, the largest tribe, in both size and population, in the United States. The paper concludes with a discussion of issues specific to Native American youth and efforts to address these problems.

  2. Weldability examination of ASTM A 240 S41500 martensitic stainless steel by thermal cycles simulation testings

    Directory of Open Access Journals (Sweden)

    Alberto Velázquez-del Rosario

    2015-07-01

    Full Text Available The weldability assets of ASTM A 240 S41500 (ASTM A 240/A 240M martensitic stainless steel are presented through the study of the effects of single and double thermal weld cycles on mechanical properties and microstructure of base metal (BM and the artificial heat affected zone (HAZ created by thermal weld simulations. For single cycles, separate peak temperatures of 1000 ºC/12 s and 1350 ºC/12 s (cooling times: 12 s in both cases were evaluated, whilst two combinations of peak temperatures: (1350 ºC/5 s + 1000 ºC/5 s ºC and (1350 ºC/12 s + 1000 ºC/12 s ºC (cooling times: 5 s and 12 s, were applied for double cycles. Post weld heat treatment (PWHT with short and long holding times were applied and Vickers hardness, impact toughness and metallographic examinations were used in order to assess mechanical and metallographic properties in the as-simulated (no heat treated and postweld heat treated conditions. Best properties of the welded joint for double thermal weld cycles with long holding times were reached, which reveals the good weldability and applicability of the tested material in post weld heat treated conditions.

  3. Estimation of improved productivity based on materials substitution in high temperature applications. Use of alloy ASTM A-335 P91

    International Nuclear Information System (INIS)

    Serna, J A; Afanador, W

    2001-01-01

    In ECOPETROL-ICP was carried out an evaluation of the mechanical and micro structural properties of modified 9 Cr-1 Mo alloy, ASTM A-335 Gr. P91, finding higher strength mechanical properties, allowable stresses and creep rupture strength, than the conventional 9 Cr-1 Mo alloy, ASTM A-335 Gr. P9, recommending the alloy P91 as substitute tube material in the radiation zone of the Visbreaking heater of Cartagena's refinery (furnace in revamping process). The results obtained permit a thickness reduction of radiation tubes of material P91 close to 25% and increase the internal volume tube over up 8%, which is a parameter to consider in improving productivity and efficiency process. Also would be obtained a significant savings cost in the material among 5 and 10%. Additionally, expectations of both design and remaining useful life would be seen extensively favored with this change of alloy

  4. Survey of International Members of the American Thoracic Society on Climate Change and Health.

    Science.gov (United States)

    Sarfaty, Mona; Kreslake, Jennifer; Ewart, Gary; Guidotti, Tee L; Thurston, George D; Balmes, John R; Maibach, Edward W

    2016-10-01

    The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed international members of the society to assess perceptions, clinical experiences, and preferred policy responses related to global climate change. A recruitment email was sent by the ATS President in October 2015 to 5,013 international members. Subsequently, four reminder emails were sent to nonrespondents. Responses were received from 489 members in 68 countries; the response rate was 9.8%. Half of respondents reported working in countries in Asia (25%) or Europe (25%), with the remainder in South America (18%), North America (Canada and Mexico) (18%), Australia or New Zealand (9%), and Africa (6%). Survey estimate confidence intervals were ± 5% or smaller. A high percentage of international ATS survey respondents judged that climate change is happening (96%), that it is driven by human activity (70%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (80%). A majority of respondents also indicated they are already observing health impacts of climate change among their patients; most commonly as increases in chronic disease severity from air pollution (88%), allergic symptoms from exposure to plants or mold (72%), and severe weather injuries (69%). An even larger majority anticipated seeing these climate-related health impacts in the next two decades. Respondents further indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. International ATS respondents, like their counterparts in the U.S., observed that human health is already adversely affected by climate change, and support responses to address this situation.

  5. Proceedings of the 2013 Meeting of the Australasian Section of the American Oil Chemists Society (AAOCS

    Directory of Open Access Journals (Sweden)

    Karen Murphy

    2013-12-01

    Full Text Available The Australasian section of the American Oil Chemists Society (AAOCS held their biennial meeting in Newcastle, Australia from 6 to 8 November, 2013. Over 150 scientists, researchers and industry representatives gathered for three days of talks and discussions on a variety of lipid related topics. The AAOCS awarded its inaugural AAOCS Award for Scientific Excellence in Lipid Research to Dr Allan Green from the Commonwealth Scientific and Industrial Research Organisation (CSIRO. Dr Green is deputy chief of the CSIRO Division of Plant Industry and has been active in lipid research for several decades. His main research focus is on plant breeding and genetic engineering techniques to develop improved oilseeds with enhanced human nutritional value and novel industrial uses. Refer to “AAOCS Award for Scientific Excellence in Lipid Research” for more detail of his contributions [1].

  6. Interventional spine and pain procedures in patients on antiplatelet and anticoagulant medications: guidelines from the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

    Science.gov (United States)

    Narouze, Samer; Benzon, Honorio T; Provenzano, David A; Buvanendran, Asokumar; De Andres, José; Deer, Timothy R; Rauck, Richard; Huntoon, Marc A

    2015-01-01

    Interventional spine and pain procedures cover a far broader spectrum than those for regional anesthesia, reflecting diverse targets and goals. When surveyed, interventional pain and spine physicians attending the American Society of Regional Anesthesia and Pain Medicine (ASRA) 11th Annual Pain Medicine Meeting exhorted that existing ASRA guidelines for regional anesthesia in patients on antiplatelet and anticoagulant medications were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors necessitated separate guidelines for pain and spine procedures. In response, ASRA formed a guidelines committee. After preliminary review of published complication reports and studies, committee members stratified interventional spine and pain procedures according to potential bleeding risk as low-, intermediate-, and high-risk procedures. The ASRA guidelines were deemed largely appropriate for the low- and intermediate-risk categories, but it was agreed that the high-risk targets required an intensive look at issues specific to patient safety and optimal outcomes in pain medicine. The latest evidence was sought through extensive database search strategies and the recommendations were evidence-based when available and pharmacology-driven otherwise. We could not provide strength and grading of these recommendations as there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations.

  7. American Contact Dermatitis Society Contact Allergy Management Program: An Epidemiologic Tool to Quantify Ingredient Usage.

    Science.gov (United States)

    Scheman, Andrew; Severson, David

    2016-01-01

    The usage prevalence of ingredients in topical products is important to dermatologists and industry. To determine the prevalence of methylisothiazolinone (MI) in various types of consumer products The Contact Allergy Management Program (CAMP) database was mapped and sorted in spreadsheet format to determine the prevalence of MI in various types of consumer products. Methylisothiazolinone was found in 13.2% of 4660 total products in CAMP. High usage of MI was seen in dishwashing products (64%), shampoos (53%), bathroom/kitchen/all-purpose cleaners (47%), hair conditioners (45%), hair dyes (43%), laundry additives/fresheners/softeners (30%), soaps/cleansers (29%), and surface cleaners/disinfectants (27%). Of the products containing MI, MI alone (without methylchloroisothiazolinone) was most common in makeup products (100%), cleaning/dish/laundry products (>99%), moisturizers (82%), shaving products (78%), sunscreens (71%), and antiaging products (67%). The American Contact Dermatitis Society's CAMP is a valuable tool to collect epidemiologic data on the incidence of specific ingredient usage in various types of topical products.

  8. Graphic Narratives and Cancer Prevention: A Case Study of an American Cancer Society Comic Book.

    Science.gov (United States)

    Krakow, Melinda

    2017-05-01

    As the interest in graphic medicine grows, health communicators have started engaging readers with compelling visual and textual accounts of health and illness, including via comic books. One context where comics have shown promise is cancer communication. This brief report presents an early example of graphic medicine developed by the American Cancer Society. "Ladies … Wouldn't It Be Better to Know?" is a comic book produced in the 1960s to provide the public with lay information about the Pap test for cervical cancer prevention and detection. An analysis of a key narrative attribute, plot development, illustrates the central role that perceived barriers played in this midcentury public health message, a component that remains a consideration of cancer communication design today. This case study of an early graphic narrative identifies promising cancer message features that can be used to address and refute barriers to cervical cancer screening and connects contemporary research with historical efforts in public health communication.

  9. Cross-cultural examination of the structure of the Revised American Pain Society Patient Outcome Questionnaire (APS-POQ-R).

    Science.gov (United States)

    Botti, Mari; Khaw, Damien; Jørgensen, Emmy Brandt; Rasmussen, Bodil; Hunter, Susan; Redley, Bernice

    2015-08-01

    This study investigated the cross-cultural factor stability and internal consistency of the Revised American Pain Society Patient Outcome Questionnaire (APS-POQ-R), a measure of the quality of postoperative pain management used internationally. We conducted exploratory factor analysis (EFA) of APS-POQ-R data from 2 point prevalence studies comprising 268 and 311 surveys of Danish and Australian medical-surgical patients, respectively. Parallel analysis indicated 4- and 3-factor solutions for Danish and Australian patients, respectively, which accounted for 58.1% and 52.9% of variance. Internal consistency was unsatisfactory among both Danish (Cronbach α = .54) and Australian (Cronbach α = .63) cohorts. There was a high degree of between-group similarity in item-factor loadings of variables coded as "pain experience," but not "pain management." This finding reflected cross-cultural differences in ratings of treatment satisfaction. For Danish patients, satisfaction was associated with the degree of pain severity and activity interference, whereas for Australian patients, satisfaction was associated with their perceived ability to participate in treatment. To facilitate further cross-cultural comparison, we compared our findings with past research conducted in the United States and Iceland. EFA supported the construct validity of the APS-POQ-R as a measure of "pain experience" but indicated that items measuring "pain management" may vary cross-culturally. Findings highlighted the need for further validation of the APS-POQ-R internationally. This study revealed the APS-POQ-R as a valid measure of postoperative pain experience for Danish and Australian patients. Measures of patients' perception of pain management were not robust to group differences in treatment expectations and demonstrated cross-cultural instability. Results highlighted the difficulties in establishing stable cross-cultural, cross-population subscales for the APS-POQ-R. Copyright © 2015

  10. Assisted reproductive technology in the United States: 2001 results generated from the American Society for Reproductive Medicine/Society for Assisted Reproductive Technology registry.

    Science.gov (United States)

    2007-06-01

    To summarize the procedures and outcomes of assisted reproductive technologies (ART) that were initiated in the United States in 2001. Data were collected electronically using the Society for Assisted Reproductive Technology (SART) Clinic Outcome Reporting System software and submitted to the American Society for Reproductive Medicine/SART Registry. Three hundred eighty-five clinics submitted data on procedures performed in 2001. Data were collated after November 2002 [corrected] so that the outcomes of all pregnancies would be known. Incidence of clinical pregnancy, ectopic pregnancy, abortion, stillbirth, and delivery. Programs reported initiating 108,130 cycles of ART treatment. Of these, 79,042 cycles involved IVF (with and without micromanipulation), with a delivery rate per retrieval of 31.6%; 340 were cycles of gamete intrafallopian transfer, with a delivery rate per retrieval of 21.9%; 661 were cycles of zygote intrafallopian transfer, with a delivery rate per retrieval of 31.0%. The following additional ART procedures were also initiated: 8,147 fresh donor oocyte cycles, with a delivery rate per transfer of 47.3%; 14,509 frozen ET procedures, with a delivery rate per transfer of 23.5%; 3,187 frozen ETs employing donated oocytes or embryos, with a delivery rate per transfer of 27.4%; and 1,366 cycles using a host uterus, with a delivery rate per transfer of 38.7%. In addition, 112 cycles were reported as combinations of more than one treatment type, 8 cycles as research, and 85 as embryo banking. As a result of all procedures, 29,585 deliveries were reported, resulting in 41,168 neonates. In 2001, there were more programs reporting ART treatment and a significant increase in reported cycles compared with 2000.

  11. Partnerships in Health Promotion for Black Americans. Proceedings of the Annual Meeting of the National Society of Allied Health (Virginia Beach, VA, March 29-30, 1985).

    Science.gov (United States)

    Douglas, Harry E., III, Comp.

    This conference report of the National Society of Allied Health focusses on the theme of health promotion for black Americans, with emphasis on creating cooperative partnerships to address the various social and environmental conditions adversely affecting minority group health status. The keynote speaker provided an historical perspective on…

  12. American Society of Clinical Oncology guidance statement: the cost of cancer care.

    Science.gov (United States)

    Meropol, Neal J; Schrag, Deborah; Smith, Thomas J; Mulvey, Therese M; Langdon, Robert M; Blum, Diane; Ubel, Peter A; Schnipper, Lowell E

    2009-08-10

    Advances in early detection, prevention, and treatment have resulted in consistently falling cancer death rates in the United States. In parallel with these advances have come significant increases in the cost of cancer care. It is well established that the cost of health care (including cancer care) in the United States is growing more rapidly than the overall economy. In part, this is a result of the prices and rapid uptake of new agents and other technologies, including advances in imaging and therapeutic radiology. Conventional understanding suggests that high prices may reflect the costs and risks associated with the development, production, and marketing of new drugs and technologies, many of which are valued highly by physicians, patients, and payers. The increasing cost of cancer care impacts many stakeholders who play a role in a complex health care system. Our patients are the most vulnerable because they often experience uneven insurance coverage, leading to financial strain or even ruin. Other key groups include pharmaceutical manufacturers that pass along research, development, and marketing costs to the consumer; providers of cancer care who dispense increasingly expensive drugs and technologies; and the insurance industry, which ultimately passes costs to consumers. Increasingly, the economic burden of health care in general, and high-quality cancer care in particular, will be less and less affordable for an increasing number of Americans unless steps are taken to curb current trends. The American Society of Clinical Oncology (ASCO) is committed to improving cancer prevention, diagnosis, and treatment and eliminating disparities in cancer care through support of evidence-based and cost-effective practices. To address this goal, ASCO established a Cost of Care Task Force, which has developed this Guidance Statement on the Cost of Cancer Care. This Guidance Statement provides a concise overview of the economic issues facing stakeholders in the cancer

  13. Mechanical behaviour of Astm A 297 grade Hp joints welded using different processes

    International Nuclear Information System (INIS)

    Emygdio, Paulo Roberto Oliveira; Zeemann, Annelise; Almeida, Luiz Henrique de

    1996-01-01

    The influence of different arc welding processes on mechanical behaviour was studied for cast heat resistant stainless steel welded joints, in the as welded conditions. ASTM A 297 grade HP with niobium and niobium/titanium additions were welded following three different welding procedures, using shielded metal arc welding gas tungsten arc welding and plasma arc welding, in six welded joints. The welded joint mechanical behaviour was evaluated by ambient temperature and 870 deg C tensile tests; and creep tests at 900 deg C and 50 MPa. Mechanical test results showed that the welding procedure qualification following welding codes is not suitable for high temperature service applications. (author)

  14. The American Society of Colon and Rectal Surgeons Clinical Practice Guidelines for the Treatment of Colon Cancer.

    Science.gov (United States)

    Vogel, Jon D; Eskicioglu, Cagla; Weiser, Martin R; Feingold, Daniel L; Steele, Scott R

    2017-10-01

    The American Society of Colon and Rectal Surgeons is dedicated to ensuring high-quality patient care by advancing the science, prevention, and management of disorders and diseases of the colon, rectum, and anus. The Clinical Practice Guidelines Committee is composed of society members who are chosen because they have demonstrated expertise in the specialty of colon and rectal surgery. This committee was created to lead international efforts in defining quality care for conditions related to the colon, rectum, and anus. This is accompanied by developing Clinical Practice Guidelines based on the best available evidence. These guidelines are inclusive and not prescriptive. Their purpose is to provide information on which decisions can be made, rather than to dictate a specific form of treatment. These guidelines are intended for the use of all practitioners, health care workers, and patients who desire information about the management of the conditions addressed by the topics covered in these guidelines. It should be recognized that these guidelines should not be deemed inclusive of all proper methods of care or exclusive of methods of care reasonably directed to obtaining the same results. The ultimate judgment regarding the propriety of any specific procedure must be made by the physician in light of all the circumstances presented by the individual patient.

  15. Recommended Amount of Sleep for a Healthy Adult: A Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society

    OpenAIRE

    Watson, Nathaniel F.; Badr, M. Safwan; Belenky, Gregory; Bliwise, Donald L.; Buxton, Orfeu M.; Buysse, Daniel; Dinges, David F.; Gangwisch, James; Grandner, Michael A.; Kushida, Clete; Malhotra, Raman K.; Martin, Jennifer L.; Patel, Sanjay R.; Quan, Stuart F.; Tasali, Esra

    2015-01-01

    Sleep is essential for optimal health. The American Academy of Sleep Medicine (AASM) and Sleep Research Society (SRS) developed a consensus recommendation for the amount of sleep needed to promote optimal health in adults, using a modified RAND Appropriateness Method process. The recommendation is summarized here. A manuscript detailing the conference proceedings and evidence supporting the final recommendation statement will be published in SLEEP and the Journal of Clinical Sleep Medicine.

  16. The American brachytherapy society survey of brachytherapy practice for carcinoma of the cervix in the United States.

    Science.gov (United States)

    Nag, S; Orton, C; Young, D; Erickson, B

    1999-04-01

    The purpose of this study was to survey the brachytherapy practice for cervical cancer in the United States. The Clinical Research Committee of the American Brachytherapy Society (ABS) performed a retrospective survey of individual physicians of the ABS and American Society of Therapeutic Radiologists and Oncologists regarding the details of the brachytherapy techniques they personally used in the treatment of cervical cancer patients for the year 1995. The replies (some of which may have been an estimate only) were tabulated. The scope of this survey did not allow us to verify the data by chart audits. A total of about 3500 questionnaires were mailed out; 521 responses were received. Of these responders, 206 (40%) did not perform any brachytherapy for carcinoma of the cervix in 1995. Of the other 315 responders reporting a total of 4892 patients treated in 1995, 88% used low dose rate (LDR) while 24% used high dose rate (HDR). There was a wide variation in the doses used. For LDR treatments, the median total external beam radiation therapy (EBRT) dose was 45 and 50 Gy and the LDR dose was 42 and 45 Gy for early and advanced cancers, respectively. For HDR treatments, the median EBRT dose was 48 and 50 Gy and the median HDR dose was 29 and 30 Gy for early and advanced cancers, respectively. The median dose per fraction was 6 Gy for a median of five fractions. Interstitial brachytherapy was used as a component of the treatment in 6% of the patients by 21% of responders. Very few responders treated with pulsed or medium dose rates. This retrospective survey showed the current brachytherapy practice pattern in the treatment of cervical cancer in the United States and can serve as a basis for future prospective national brachytherapy data registry. There was wide variation in the practice pattern, emphasizing the urgent need for consensus on these issues. Copyright 1999 Academic Press.

  17. Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society on the Recommended Amount of Sleep for a Healthy Adult: Methodology and Discussion.

    Science.gov (United States)

    Watson, Nathaniel F; Badr, M Safwan; Belenky, Gregory; Bliwise, Donald L; Buxton, Orfeu M; Buysse, Daniel; Dinges, David F; Gangwisch, James; Grandner, Michael A; Kushida, Clete; Malhotra, Raman K; Martin, Jennifer L; Patel, Sanjay R; Quan, Stuart F; Tasali, Esra

    2015-08-01

    The American Academy of Sleep Medicine and Sleep Research Society recently released a Consensus Statement regarding the recommended amount of sleep to promote optimal health in adults. This paper describes the methodology, background literature, voting process, and voting results for the consensus statement. In addition, we address important assumptions and challenges encountered during the consensus process. Finally, we outline future directions that will advance our understanding of sleep need and place sleep duration in the broader context of sleep health. © 2015 Associated Professional Sleep Societies, LLC.

  18. Science and Society Colloquium

    CERN Multimedia

    Randi, J

    1991-01-01

    Mr. Randi will give an update of his lecture to the American Physical Society on the occasion of his award of the 1989 Forum Prize. The citation said: "for his unique defense of Science and the scientific method in many disciplines, including physics, against pseudoscience, frauds and charlatans. His use of scientific techniques has contributed to refuting suspicious and fraudulent claims of paranormal results. He has contributed significantly to public understanding of important issues where science and society interact". He is a professional magician and author of many books. He worked with John Maddox, the Editor of Nature to investigate the claims of "water with memory".

  19. Computational benchmark problems: a review of recent work within the American Nuclear Society Mathematics and Computation Division

    International Nuclear Information System (INIS)

    Dodds, H.L. Jr.

    1977-01-01

    An overview of the recent accomplishments of the Computational Benchmark Problems Committee of the American Nuclear Society Mathematics and Computation Division is presented. Solutions of computational benchmark problems in the following eight areas are presented and discussed: (a) high-temperature gas-cooled reactor neutronics, (b) pressurized water reactor (PWR) thermal hydraulics, (c) PWR neutronics, (d) neutron transport in a cylindrical ''black'' rod, (e) neutron transport in a boiling water reactor (BWR) rod bundle, (f) BWR transient neutronics with thermal feedback, (g) neutron depletion in a heavy water reactor, and (h) heavy water reactor transient neutronics. It is concluded that these problems and solutions are of considerable value to the nuclear industry because they have been and will continue to be useful in the development, evaluation, and verification of computer codes and numerical-solution methods

  20. 1997 NASA-ODU American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program

    Science.gov (United States)

    Tiwari, Surendra N. (Compiler); Young, Deborah B. (Compiler)

    1998-01-01

    Since 1964, the National Aeronautics and Space Administration (NASA) has supported a program of summer faculty fellowships for engineering and science educators. In a series of collaborations between NASA research and development centers and nearby universities, engineering faculty members spend 10 weeks working with professional peers on research. The Summer Faculty Program Committee of the American Society for Engineering Education supervises the programs. Objectives of the program are as follows: (1) To further the professional knowledge of qualified engineering and science faculty members, (2) To stimulate and exchange ideas between participants and NASA; (3) To enrich and refresh the research and teaching activities of participants' institutions; and (4) To contribute to the research objectives of the NASA center. Program description is as follows: College or university faculty members will be appointed as Research Fellows to spend 10 weeks in cooperative research and study at the NASA Langley Research Center. The Fellow will devote approximately 90 percent of the time to a research problem and the remaining time to a study program. The study program will consist of lectures and seminars on topics of interest or that are directly relevant to the Fellows' research topics. The lectures and seminar leaders will be distinguished scientists and engineers from NASA, education, and industry.

  1. Readability of patient education materials on the American Orthopaedic Society for Sports Medicine website.

    Science.gov (United States)

    Eltorai, Adam E M; Han, Alex; Truntzer, Jeremy; Daniels, Alan H

    2014-11-01

    The recommended readability of patient education materials by the American Medical Association (AMA) and National Institutes of Health (NIH) should be no greater than a sixth-grade reading level. However, online resources may be too complex for some patients to understand, and poor health literacy predicts inferior health-related quality of life outcomes. This study evaluated whether the American Orthopaedic Society for Sports Medicine (AOSSM) website's patient education materials meet recommended readability guidelines for medical information. We hypothesized that the readability of these online materials would have a Flesch-Kincaid formula grade above the sixth grade. All 65 patient education entries of the AOSSM website were analyzed for grade level readability using the Flesch-Kincaid formula, a widely used and validated tool to evaluate the text reading level. The average (standard deviation) readability of all 65 articles was grade level 10.03 (1.44); 64 articles had a readability score above the sixth-grade level, which is the maximum level recommended by the AMA and NIH. Mean readability of the articles exceeded this level by 4.03 grade levels (95% CI, 3.7-4.4; P reading level of US adults. Mean readability of the articles exceeded this level by 2.03 grade levels (95% CI, 1.7-2.4; P online AOSSM patient education materials exceeds the readability level recommended by the AMA and NIH, and is above the average reading level of the majority of US adults. This online information may be of limited utility to most patients due to a lack of comprehension. Our study provides a clear example of the need to improve the readability of specific education material in order to maximize the efficacy of multimedia sources.

  2. The American Society for Radiation Oncology's 2015 Core Physics Curriculum for Radiation Oncology Residents

    International Nuclear Information System (INIS)

    Burmeister, Jay; Chen, Zhe; Chetty, Indrin J.; Dieterich, Sonja; Doemer, Anthony; Dominello, Michael M.; Howell, Rebecca M.; McDermott, Patrick; Nalichowski, Adrian; Prisciandaro, Joann; Ritter, Tim; Smith, Chadd; Schreiber, Eric; Shafman, Timothy; Sutlief, Steven; Xiao, Ying

    2016-01-01

    Purpose: The American Society for Radiation Oncology (ASTRO) Physics Core Curriculum Subcommittee (PCCSC) has updated the recommended physics curriculum for radiation oncology resident education to improve consistency in teaching, intensity, and subject matter. Methods and Materials: The ASTRO PCCSC is composed of physicists and physicians involved in radiation oncology residency education. The PCCSC updated existing sections within the curriculum, created new sections, and attempted to provide additional clinical context to the curricular material through creation of practical clinical experiences. Finally, we reviewed the American Board of Radiology (ABR) blueprint of examination topics for correlation with this curriculum. Results: The new curriculum represents 56 hours of resident physics didactic education, including a 4-hour initial orientation. The committee recommends completion of this curriculum at least twice to assure both timely presentation of material and re-emphasis after clinical experience. In addition, practical clinical physics and treatment planning modules were created as a supplement to the didactic training. Major changes to the curriculum include addition of Fundamental Physics, Stereotactic Radiosurgery/Stereotactic Body Radiation Therapy, and Safety and Incidents sections, and elimination of the Radiopharmaceutical Physics and Dosimetry and Hyperthermia sections. Simulation and Treatment Verification and optional Research and Development in Radiation Oncology sections were also added. A feedback loop was established with the ABR to help assure that the physics component of the ABR radiation oncology initial certification examination remains consistent with this curriculum. Conclusions: The ASTRO physics core curriculum for radiation oncology residents has been updated in an effort to identify the most important physics topics for preparing residents for careers in radiation oncology, to reflect changes in technology and practice since

  3. Effects of the normalizing time and temperature on the impact properties of ASTM A-516 grade 70 steel

    International Nuclear Information System (INIS)

    Carneiro, T.; Cescon, T.

    1982-01-01

    The influence of normalizing time and temperature, as well as the plate thickness, on the impact properties of ASTM A-516 grade 70 steel, is studied. Results show that different normalizing conditions may lead to equivalent microstructure with different impact properties. Normalizing conditions that cause low cooling rate in the critical zone exhibit banded microstructure with inferior impact properties. (Author) [pt

  4. Attitudes toward Family Obligations among American Adolescents with Asian, Latin American, and European Backgrounds.

    Science.gov (United States)

    Fuligni, Andrew J.; Tseng, Vivian; Lam, May

    1999-01-01

    Examined attitudes toward family obligations in American tenth and twelfth graders from Filipino, Chinese, Mexican, Central and South American, and European backgrounds. Found that even within a society emphasizing adolescent autonomy and independence, youths from families with collectivistic traditions retain their parents' familial values and…

  5. Thin coating thickness determination using radioisotope-excited x-ray fluorescence spectrometry

    International Nuclear Information System (INIS)

    Del Castillo, Lorena A.; Calix, Virginia S.

    2001-01-01

    Three different approaches on thin coating thickness determination using a radioisotope-excited x-ray fluorescence spectrometry were demonstrated and results were compared. A standard of thin layer of gold (Au) on a nickel (Ni) substrate from the US National Bureau of Standards (with a nominal thickness of 0.300505 microns of at least 99.9% Au electrodeposited over 2 nils of Ni) on low carbon steel (1010) was analyzed using a Cd 109-excited XRF system. Au thickness computations were done using the (a) thin standard approach, (b) thick standard approach, and (c) x-ray absorption method (ASTM A754-79 1982). These three methods yielded results within the limit set by the American Society for Testing Materials (ASTM), which is +/-3%. Of the three methods, the thick standard yielded the best result with 0.124% error. (Author)

  6. Single Common Powertrain Lubricant (SCPL) Development. Part 2

    Science.gov (United States)

    2014-04-01

    Lubricant (SCPL), General Engine Products (GEP) 6.5L(T), Detroit Diesel Corporation ( DDC ) 6V53T, High Temperature Oil Endurance, MIL-PRF-46167, MIL-PRF...using the Detroit Diesel Corporation ( DDC ) 6V53T, American Society for Testing and Materials (ASTM) D5966 roller follower wear protection...candidates. A Detroit Diesel Corporation ( DDC ) 6V53T, from the M113A3 Armored Personnel Carrier (APC), was used to evaluate the two revised candidates and a

  7. Experimental and numerical study of a modified ASTM C633 adhesion test for strongly-bonded coatings

    Energy Technology Data Exchange (ETDEWEB)

    Bernardie, Raphaëlle; Berkouch, Reda; Valette, Stéphane; Absi, Joseph; Lefort, Pierre [University of Limoges, Limoges Cedex (France)

    2017-07-15

    When coatings are strongly bonded to their substrates it is often difficult to measure the adhesion values. The proposed method, which is suggested naming “silver print test”, consists in covering the central part of the samples with a thin layer of silver paint, before coating. The process used for testing this new method was the Air plasma spraying (APS), and the materials used were alumina coatings on C35 steel substrates, previously pre-oxidized in CO{sub 2}. The silver painted area was composed of small grains that did not oxidize but that significantly sintered during the APS process. The silver layer reduced the surface where the coating was linked to the substrate, which allowed its debonding, using the classical adhesion test ASTM C633-13, while the direct use of this test (without silver painting) led to ruptures inside the glue used in this test. The numerical modelling, based on the finite element method with the ABAQUS software, provided results in good agreement with the experimental measurements. This concordance validated the used method and allowed accessing to the values of adherence when the experimental test ASTM C633-13 failed, because of ruptures in the glue. After standardization, the “silver print test” might be used for other kinds of deposition methods, such as PVD, CVD, PECVD.

  8. THE GODFATHER AND THE AMERICAN DREAM

    Directory of Open Access Journals (Sweden)

    Goksu Gigi Akkan

    2017-01-01

    Full Text Available This paper tries to demonstrate how The Godfather by Francis Ford Coppola challenges the myth of the American Dream. The thesis of the paper is that The Godfather is not a film seeking to re-establish American norms and ideals, but that it tries to break down and shed light on the corrupt side of the modern American society through the myth of “the American Dream”. The structure of the paper is so that first, what other academics and critiques have to say about Coppola’s attempt to criticize the American society and ideals will be visited, as this will give the reader a clearer understanding of the film’s meaning and message. Then, analyses of how certain characters are built and how their presence and attributes contribute to the film’s meaning will be conducted, topped off with the usage of props.

  9. The 2012 Hormone Therapy Position Statement of The North American Menopause Society

    Science.gov (United States)

    2012-01-01

    Objective This position statement aimed to update the evidence-based position statement published by The North American Menopause Society (NAMS) in 2010 regarding recommendations for hormone therapy (HT) for postmenopausal women. This updated position statement further distinguishes the emerging differences in the therapeutic benefit-risk ratio between estrogen therapy (ET) and combined estrogen-progestogen therapy (EPT) at various ages and time intervals since menopause onset. Methods An Advisory Panel of expert clinicians and researchers in the field of women’s health was enlisted to review the 2010 NAMS position statement, evaluate new evidence, and reach consensus on recommendations. The Panel’s recommendations were reviewed and approved by the NAMS Board of Trustees as an official NAMS position statement. Results Current evidence supports the use of HT for perimenopausal and postmenopausal women when the balance of potential benefits and risks is favorable for the individual woman. This position statement reviews the effects of ET and EPT on many aspects of women’s health and recognizes the greater safety profile associated with ET. Conclusions Recent data support the initiation of HT around the time of menopause to treat menopause-related symptoms and to prevent osteoporosis in women at high risk of fracture. The more favorable benefit-risk ratio for ET allows more flexibility in extending the duration of use compared with EPT, where the earlier appearance of increased breast cancer risk precludes a recommendation for use beyond 3 to 5 years. PMID:22367731

  10. Shared Decision Making in Intensive Care Units: An American College of Critical Care Medicine and American Thoracic Society Policy Statement

    Science.gov (United States)

    Kon, Alexander A.; Davidson, Judy E.; Morrison, Wynne; Danis, Marion; White, Douglas B.

    2015-01-01

    Objectives Shared decision-making (SDM) is endorsed by critical care organizations, however there remains confusion about what SDM is, when it should be used, and approaches to promote partnerships in treatment decisions. The purpose of this statement is to define SDM, recommend when SDM should be used, identify the range of ethically acceptable decision-making models, and present important communication skills. Methods The American College of Critical Care Medicine (ACCM) and American Thoracic Society (ATS) Ethics Committees reviewed empirical research and normative analyses published in peer-reviewed journals to generate recommendations. Recommendations approved by consensus of the full Ethics Committees of ACCM and ATS were included in the statement. Main Results Six recommendations were endorsed: 1) Definition: Shared decision-making is a collaborative process that allows patients, or their surrogates, and clinicians to make health care decisions together, taking into account the best scientific evidence available, as well as the patient’s values, goals, and preferences. 2) Clinicians should engage in a SDM process to define overall goals of care (including decisions regarding limiting or withdrawing life-prolonging interventions) and when making major treatment decisions that may be affected by personal values, goals, and preferences. 3) Clinicians should use as their “default” approach a SDM process that includes three main elements: information exchange, deliberation, and making a treatment decision. 4) A wide range of decision-making approaches are ethically supportable including patient- or surrogate-directed and clinician-directed models. Clinicians should tailor the decision-making process based on the preferences of the patient or surrogate. 5) Clinicians should be trained in communication skills. 6) Research is needed to evaluate decision-making strategies. Conclusions Patient and surrogate preferences for decision-making roles regarding value

  11. The Power of Women in Three American Indian Societies.

    Science.gov (United States)

    Kidwell, Clara Sue

    1978-01-01

    The persistence of the Indian woman's biological function and role in the society has provided a sense of security and stability in the changing Indian world, and their flexibility in adapting to other roles has been a survival factor in processes of acculturation. (Author/EB)

  12. American Thoracic Society and National Heart, Lung, and Blood Institute Implementation Research Workshop Report.

    Science.gov (United States)

    Bender, Bruce G; Krishnan, Jerry A; Chambers, David A; Cloutier, Michelle M; Riekert, Kristin A; Rand, Cynthia S; Schatz, Michael; Thomson, Carey C; Wilson, Sandra R; Apter, Andrea; Carson, Shannon S; George, Maureen; Gerald, Joe K; Gerald, Lynn; Goss, Christopher H; Okelo, Sande O; Mularski, Richard A; Nguyen, Huong Q; Patel, Minal R; Szefler, Stanley J; Weiss, Curtis H; Wilson, Kevin C; Freemer, Michelle

    2015-12-01

    To advance implementation research (IR) in respiratory, sleep, and critical care medicine, the American Thoracic Society and the Division of Lung Diseases from the NHLBI cosponsored an Implementation Research Workshop on May 17, 2014. The goals of IR are to understand the barriers and facilitators of integrating new evidence into healthcare practices and to develop and test strategies that systematically target these factors to accelerate the adoption of evidence-based care. Throughout the workshop, presenters provided examples of IR that focused on the rate of adoption of evidence-based practices, the feasibility and acceptability of interventions to patients and other stakeholders who make healthcare decisions, the fidelity with which practitioners use specific interventions, the effects of specific barriers on the sustainability of an intervention, and the implications of their research to inform policies to improve patients' access to high-quality care. During the discussions that ensued, investigators' experience led to recommendations underscoring the importance of identifying and involving key stakeholders throughout the research process, ensuring that those who serve as reviewers understand the tenets of IR, managing staff motivation and turnover, and tackling the challenges of scaling up interventions across multiple settings.

  13. Interests diffusion on a semantic multiplex. Comparing Computer Science and American Physical Society communities

    Science.gov (United States)

    D'Agostino, Gregorio; De Nicola, Antonio

    2016-10-01

    Exploiting the information about members of a Social Network (SN) represents one of the most attractive and dwelling subjects for both academic and applied scientists. The community of Complexity Science and especially those researchers working on multiplex social systems are devoting increasing efforts to outline general laws, models, and theories, to the purpose of predicting emergent phenomena in SN's (e.g. success of a product). On the other side the semantic web community aims at engineering a new generation of advanced services tailored to specific people needs. This implies defining constructs, models and methods for handling the semantic layer of SNs. We combined models and techniques from both the former fields to provide a hybrid approach to understand a basic (yet complex) phenomenon: the propagation of individual interests along the social networks. Since information may move along different social networks, one should take into account a multiplex structure. Therefore we introduced the notion of "Semantic Multiplex". In this paper we analyse two different semantic social networks represented by authors publishing in the Computer Science and those in the American Physical Society Journals. The comparison allows to outline common and specific features.

  14. An official American thoracic society workshop report: developing performance measures from clinical practice guidelines.

    Science.gov (United States)

    Kahn, Jeremy M; Gould, Michael K; Krishnan, Jerry A; Wilson, Kevin C; Au, David H; Cooke, Colin R; Douglas, Ivor S; Feemster, Laura C; Mularski, Richard A; Slatore, Christopher G; Wiener, Renda Soylemez

    2014-05-01

    Many health care performance measures are either not based on high-quality clinical evidence or not tightly linked to patient-centered outcomes, limiting their usefulness in quality improvement. In this report we summarize the proceedings of an American Thoracic Society workshop convened to address this problem by reviewing current approaches to performance measure development and creating a framework for developing high-quality performance measures by basing them directly on recommendations from well-constructed clinical practice guidelines. Workshop participants concluded that ideally performance measures addressing care processes should be linked to clinical practice guidelines that explicitly rate the quality of evidence and the strength of recommendations, such as the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) process. Under this framework, process-based performance measures would only be developed from strong recommendations based on high- or moderate-quality evidence. This approach would help ensure that clinical processes specified in performance measures are both of clear benefit to patients and supported by strong evidence. Although this approach may result in fewer performance measures, it would substantially increase the likelihood that quality-improvement programs based on these measures actually improve patient care.

  15. Standard specification for cobalt-chromium-nickel-molybdenum-tungsten alloy (UNS R31233) plate, sheet and strip. ASTM standard

    International Nuclear Information System (INIS)

    1998-09-01

    This specification is under the jurisdiction of ASTM Committee B-2 on Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee B02.07 on Refined Nickel and Cobalt, and Alloys Containing Nickel or Cobalt or Both as Principal Constituents. Current edition approved Apr. 10, 1998 and published September 1998. Originally published as B 818-91. Last previous edition was B 818-93

  16. The ACTTION-American Pain Society Pain Taxonomy (AAPT): an evidence-based and multidimensional approach to classifying chronic pain conditions.

    Science.gov (United States)

    Fillingim, Roger B; Bruehl, Stephen; Dworkin, Robert H; Dworkin, Samuel F; Loeser, John D; Turk, Dennis C; Widerstrom-Noga, Eva; Arnold, Lesley; Bennett, Robert; Edwards, Robert R; Freeman, Roy; Gewandter, Jennifer; Hertz, Sharon; Hochberg, Marc; Krane, Elliot; Mantyh, Patrick W; Markman, John; Neogi, Tuhina; Ohrbach, Richard; Paice, Judith A; Porreca, Frank; Rappaport, Bob A; Smith, Shannon M; Smith, Thomas J; Sullivan, Mark D; Verne, G Nicholas; Wasan, Ajay D; Wesselmann, Ursula

    2014-03-01

    Current approaches to classification of chronic pain conditions suffer from the absence of a systematically implemented and evidence-based taxonomy. Moreover, existing diagnostic approaches typically fail to incorporate available knowledge regarding the biopsychosocial mechanisms contributing to pain conditions. To address these gaps, the Analgesic, Anesthetic, and Addiction Clinical Trial Translations Innovations Opportunities and Networks (ACTTION) public-private partnership with the U.S. Food and Drug Administration and the American Pain Society (APS) have joined together to develop an evidence-based chronic pain classification system called the ACTTION-APS Pain Taxonomy. This paper describes the outcome of an ACTTION-APS consensus meeting, at which experts agreed on a structure for this new taxonomy of chronic pain conditions. Several major issues around which discussion revolved are presented and summarized, and the structure of the taxonomy is presented. ACTTION-APS Pain Taxonomy will include the following dimensions: 1) core diagnostic criteria; 2) common features; 3) common medical comorbidities; 4) neurobiological, psychosocial, and functional consequences; and 5) putative neurobiological and psychosocial mechanisms, risk factors, and protective factors. In coming months, expert working groups will apply this taxonomy to clusters of chronic pain conditions, thereby developing a set of diagnostic criteria that have been consistently and systematically implemented across nearly all common chronic pain conditions. It is anticipated that the availability of this evidence-based and mechanistic approach to pain classification will be of substantial benefit to chronic pain research and treatment. The ACTTION-APS Pain Taxonomy is an evidence-based chronic pain classification system designed to classify chronic pain along the following dimensions: 1) core diagnostic criteria; 2) common features; 3) common medical comorbidities; 4) neurobiological, psychosocial

  17. American Missionary Universities in China and the Middle East and American Philanthropy

    DEFF Research Database (Denmark)

    Bertelsen, Rasmus Gjedssø

    2014-01-01

    This article investigates the interacting soft power of two important categories of American transnational actors: American missionary universities in China and the Middle East and American religious, foundation and individual philanthropy. These transnational actors have had and have soft power...... in the host societies. The universities and their philanthropic donors have strengthened US national soft power regarding milieu goals of elite attraction to education, language and liberal norms. However, US national soft power concerning possession goals of acceptance of foreign policies in China...

  18. MEXICAN-AMERICAN STUDY PROJECT. ADVANCE REPORT 9, THE SPANISH AMERICANS OF NEW MEXICO--A DISTINCTIVE HERITAGE.

    Science.gov (United States)

    GONZALEZ, NANCIE L.

    USING NEW MEXICO AS A BASIS TO TRACE THE SPANISH-AMERICAN AND MEXICAN-AMERICAN HERITAGE, THE AUTHOR STATES THAT ANY STIGMA PLACED ON THE LATTER GROUP IS ONE OF CLASS DISTINCTION. THERE IS EVIDENCE THAT ACCULTURATION AND ASSIMILATION OF BOTH GROUPS INTO THE ANGLO-AMERICAN SOCIETY IS PROCEEDING STEADILY, AND THAT THE WORLD WARS AND THE KOREAN…

  19. Reporting of Uncertainty at the 2013 Annual Meeting of the American Society for Radiation Oncology

    International Nuclear Information System (INIS)

    Lee, W. Robert

    2014-01-01

    Purpose: The annual meeting of the American Society for Radiation Oncology (ASTRO) is designed to disseminate new scientific findings and technical advances to professionals. Best practices of scientific dissemination require that some level of uncertainty (or imprecision) is provided. Methods and Materials: A total of 279 scientific abstracts were selected for oral presentation in a clinical session at the 2013 ASTRO Annual Meeting. A random sample of these abstracts was reviewed to determine whether a 95% confidence interval (95% CI) or analogous measure of precision was provided for time-to-event analyses. Results: A sample of 140 abstracts was reviewed. Of the 65 abstracts with Kaplan-Meier or cumulative incidence analyses, 6 included some measure of precision (6 of 65 = 9%; 95% CI, 2-16). Of the 43 abstracts reporting ratios for time-to-event analyses (eg, hazard ratio, risk ratio), 22 included some measure of precision (22 of 43 = 51%; 95% CI, 36-66). Conclusions: Measures of precision are not provided in a significant percentage of abstracts selected for oral presentation at the Annual Meeting of ASTRO

  20. The American Geriatrics Society/National Institute on Aging Bedside-to-Bench Conference: Research Agenda on Delirium in Older Adults

    Science.gov (United States)

    Mikhailovich, Anna

    2015-01-01

    The American Geriatrics Society, with support from the National Institute on Aging and the John A. Hartford Foundation, held its seventh Bedside-to-Bench research conference, entitled “Delirium in Older Adults: Finding Order in the Disorder” on February 9–11, 2014, to provide participants with opportunities to learn about cutting-edge research developments, draft recommendations for future research involving translational efforts, and opportunities to network with colleagues and leaders in the field. This meeting was the first of three conferences that will address delirium, sleep disorders, and voiding difficulties and urinary incontinence, emphasizing, whenever possible, the relationships and potentially shared clinical and pathophysiological features between these common geriatric syndromes. PMID:25834932

  1. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1987, volume 2

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1987-01-01

    The 1987 Johnson Space Center (JCS) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of ASEE. The basic objectives of the program are: to further the professional knowledge of qualified engineering and science faculty members; to stimulate an exchange of ideas between participants and NASA; to enrich and refresh the research and teaching activities of participants' institutions; and to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports on the research projects done by the faculty fellows during the summer of 1987.

  2. American Brachytherapy Society recommendations for reporting morbidity after prostate brachytherapy

    International Nuclear Information System (INIS)

    Nag, Subir; Ellis, Rodney J.; Merrick, Gregory S.; Bahnson, Robert; Wallner, Kent; Stock, Richard

    2002-01-01

    Purpose: To standardize the reporting of brachytherapy-related prostate morbidity to guide ongoing clinical practice and future investigations. Methods: Members of the American Brachytherapy Society (ABS) with expertise in prostate brachytherapy performed a literature review and, guided by their clinical experience, formulated specific recommendations for reporting on morbidity related to prostate brachytherapy. Results: The ABS recommends using validated, patient-administered health-related quality-of-life instruments for the determination of baseline and follow-up data regarding bowel, urinary, and sexual function. Both actuarial and crude incidences should be reported, along with the temporal resolution of specific complications, and correlated with the doses to the normal tissues. The International Prostate Symptom Score is recommended to assess urinary morbidity, and any dysuria, gross hematuria, urinary retention, incontinence, or medication use should be quantified. Likewise, the ''Sexual Health Inventory for Men,'' which includes the specific erectile questions of the International Index of Erectile Function, is the preferred instrument for reporting sexual function, and the loss of sexual desire, incidence of hematospermia, painful orgasm (orgasmalgia), altered orgasm intensity, decreased ejaculatory volume, use of erectile aids, and use of hormones for androgen deprivation should be quantified. The ABS recommends adoption of the Radiation Therapy Oncology Group/European Organization for Research and Treatment of Cancer acute and late radiation morbidity scoring scheme for reporting rectal morbidity and noting the incidence of rectal steroid, laser, or antidiarrheal use. Conclusion: It is important to focus on health-related quality-of-life issues in the treatment of prostate cancer, because the control rates are very similar between appropriate treatment modalities. The ABS recommends using the International Prostate Symptom Score, International Index of

  3. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.

  4. ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics, Three Decades of High-quality, Technically-rigorous Normalization

    Science.gov (United States)

    Jenkins, Michael G.; Salem, Jonathan A.

    2016-01-01

    Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.

  5. American Society for Metabolic and Bariatric Surgery estimation of metabolic and bariatric procedures performed in the United States in 2016.

    Science.gov (United States)

    English, Wayne J; DeMaria, Eric J; Brethauer, Stacy A; Mattar, Samer G; Rosenthal, Raul J; Morton, John M

    2018-03-01

    Bariatric surgery, despite being the most successful long-lasting treatment for morbid obesity, remains underused as only approximately 1% of all patients who qualify for surgery actually undergo surgery. To determine if patients in need are receiving appropriate therapy, the American Society for Metabolic and Bariatric Surgery created a Numbers Taskforce to specify annual rate of use for obesity treatment interventions. The objective of this study was to determine metabolic and bariatric procedure trends since 2011 and to provide the best estimate of the number of procedures performed in the United States in 2016. United States. We reviewed data from the Metabolic and Bariatric Surgery Accreditation and Quality Improvement Program, National Surgical Quality Improvement Program, Bariatric Outcomes Longitudinal Database, and Nationwide Inpatient Sample. In addition, data from industry and outpatient centers were used to estimate outpatient center activity. Data from 2016 were compared with the previous 5 years of data. Compared with 2015, the total number of metabolic and bariatric procedures performed in 2016 increased from approximately 196,000 to 216,000. The sleeve gastrectomy trend is increasing, and it continues to be the most common procedure. The gastric bypass and gastric band trends continued to decrease as seen in previous years. The percentage of revision procedures and biliopancreatic diversion with duodenal switch procedures increased slightly. Finally, intragastric balloons placement emerged as a significant contributor to the cumulative total number of procedures performed. There is increasing use of metabolic and bariatric procedures performed in the United States from 2011 to 2016, with a nearly 10% increase noted from 2015 to 2016. Copyright © 2018 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  6. Topical, geospatial, and temporal diffusion of the 2015 North American Menopause Society position statement on nonhormonal management of vasomotor symptoms.

    Science.gov (United States)

    Carpenter, Janet S; Laine, Tei; Harrison, Blake; LePage, Meghan; Pierce, Taran; Hoteling, Nathan; Börner, Katy

    2017-10-01

    We sought to depict the topical, geospatial, and temporal diffusion of the 2015 North American Menopause Society position statement on the nonhormonal management of menopause-associated vasomotor symptoms released on September 21, 2015, and its associated press release from September 23, 2015. Three data sources were used: online news articles, National Public Radio, and Twitter. For topical diffusion, we compared keywords and their frequencies among the position statement, press release, and online news articles. We also created a network figure depicting relationships across key content categories or nodes. For geospatial diffusion within the United States, we compared locations of the 109 National Public Radio (NPR) stations covering the statement to 775 NPR stations not covering the statement. For temporal diffusion, we normalized and segmented Twitter data into periods before and after the press release (September 12, 2015 to September 22, 2015 vs September 23, 2015 to October 3, 2015) and conducted a burst analysis to identify changes in tweets from before to after. Topical information diffused across sources was similar with the exception of the more scientific terms "vasomotor symptoms" or "vms" versus the more colloquial term "hot flashes." Online news articles indicated media coverage of the statement was mainly concentrated in the United States. NPR station data showed similar proportions of stations airing the story across the four census regions (Northeast, Midwest, south, west; P = 0.649). Release of the statement coincided with bursts in the menopause conversation on Twitter. The findings of this study may be useful for directing the development and dissemination of future North American Menopause Society position statements and/or press releases.

  7. American Society of Clinical Oncology Summit on Addressing Obesity Through Multidisciplinary Provider Collaboration: Key Findings and Recommendations for Action.

    Science.gov (United States)

    Ligibel, Jennifer A; Alfano, Catherine M; Hershman, Dawn L; Merrill, Janette K; Basen-Engquist, Karen; Bloomgarden, Zachary T; Demark-Wahnefried, Wendy; Dixon, Suzanne; Hassink, Sandra G; Jakicic, John M; Morton, John Magaña; Okwuosa, Tochi M; Powell-Wiley, Tiffany M; Rothberg, Amy E; Stephens, Mark; Streett, Sarah E; Wild, Robert A; Westman, Eric A; Williams, Ronald J; Wollins, Dana S; Hudis, Clifford A

    2017-11-01

    Given the increasing evidence that obesity increases the risk of developing and dying from malignancy, the American Society of Clinical Oncology (ASCO) launched an Obesity Initiative in 2013 that was designed to increase awareness among oncology providers and the general public of the relationship between obesity and cancer and to promote research in this area. Recognizing that the type of societal change required to impact the obesity epidemic will require a broad-based effort, ASCO hosted the "Summit on Addressing Obesity through Multidisciplinary Collaboration" in 2016. This meeting was held to review current challenges in addressing obesity within the respective health care provider communities and to identify priorities that would most benefit from a collective and cross-disciplinary approach. Efforts focused on four key areas: provider education and training; public education and activation; research; and policy and advocacy. Summit attendees discussed current challenges in addressing obesity within their provider communities and identified priorities that would most benefit from multidisciplinary collaboration. A synopsis of recommendations to facilitate future collaboration, as well as examples of ongoing cooperative efforts, provides a blueprint for multidisciplinary provider collaboration focused on obesity prevention and treatment. © 2017 The Obesity Society.

  8. Engagement of the medical-technology sector with society.

    Science.gov (United States)

    Williams, David; Edelman, Elazer R; Radisic, Milica; Laurencin, Cato; Untereker, Darrel

    2017-04-12

    The medical-technology sector must educate society in an unbiased rational way about the successes and benefits of biotechnology innovation. Copyright © 2017, American Association for the Advancement of Science.

  9. [Diagnostic criteria for Menière's disease. Consensus document of the Bárány Society, the Japan Society for Equilibrium Research, the European Academy of Otology and Neurotology (EAONO), the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS) and the Korean Balance Society].

    Science.gov (United States)

    Lopez-Escamez, José A; Carey, John; Chung, Won-Ho; Goebel, Joel A; Magnusson, Måns; Mandalà, Marco; Newman-Toker, David E; Strupp, Michael; Suzuki, Mamoru; Trabalzini, Franco; Bisdorff, Alexandre

    2016-01-01

    This paper presents diagnostic criteria for Menière's disease jointly formulated by the Classification Committee of the Bárány Society, The Japan Society for Equilibrium Research, the European Academy of Otology and Neurotology (EAONO), the Equilibrium Committee of the American Academy of Otolaryngology-Head and Neck Surgery (AAO-HNS) and the Korean Balance Society. The classification includes 2 categories: definite Menière's disease and probable Menière's disease. The diagnosis of definite Menière's disease is based on clinical criteria and requires the observation of an episodic vertigo syndrome associated with low-to medium-frequency sensorineural hearing loss and fluctuating aural symptoms (hearing, tinnitus and/or fullness) in the affected ear. Duration of vertigo episodes is limited to a period between 20 min and 12h. Probable Menière's disease is a broader concept defined by episodic vestibular symptoms (vertigo or dizziness) associated with fluctuating aural symptoms occurring in a period from 20 min to 24h. Copyright © 2015 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

  10. Tales from the hundred year history of the American Physical Society

    Science.gov (United States)

    Lustig, H.

    1999-05-01

    The tale to be told on this occasion - a tale only slightly out of school - is that of the punctuated evolution of the APS in pursuing its hundred years old mission, "the advancement and diffusion of the knowledge of physics". For long periods this goal was pursued, singlemindedly and impressively, through scientfic meetings and the Society's journals. However, within a year of its founding, the APS,in concert with other scientific societies, had already "lobbied" successfully for the establishment of the Bureau of Standards. But then all was quiet on the public front until after World War II. Since that time there have been three waves of forays into the public arena. The first, which spanned the "McCarthy period", was in defense of the freedom of scientists to practice their profession across national boundaries; of the right to announce the results of their research even if they trod on powerful toes (the Astin case); and of individual physicists, such as E.U. Condon and J.Robert Oppenheimer,who had been unfairly accused and badly treated. The second wave occurred in the late sixties and early seventies when, initially much pushed by activist members, the Society's leadership came to grips with broad social issues, such as segregation in the South, the Equal Rights Amendment, and, eventually, arms control and nuclear weapons. The third immersion in public affairs, which is still very much in progress, can be characterized as worrying and speaking out on what physics can do for the country (provide authoritative studies on nuclear energy, renewables, directed energy weapons, etc.) and what the country can do for physics (provide more money). Although lobbying for better funding is still a relatively minor occupation of the Society, it raises the question how physics -an elitist pursuit -can be truthfully and effectively "sold" in a democratic and egalitarian society.

  11. The new totalitarian society

    OpenAIRE

    Vlajki Emil

    2011-01-01

    The new totalitarian society is a euphemized expression denoting the New World Order, which in itself denotes the American globalization. The underpinning of this mindset is rationality, which is characteristic of Western civilization. Christianity engendered rationality by introducing it through St. Thomas Aquinas, Aristotle, and especially formal logic. Since it is obvious that religion and logic cannot ultimately be harmonized, this combination has proven lethal in many cases throughout hi...

  12. SRC-I demonstration plant analytical laboratory methods manual. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

    1983-03-01

    This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

  13. Ultrasonic testing and inspection of steel castings for use in elevated temperatures acc. to DIN 17245

    International Nuclear Information System (INIS)

    Christianus, D.; Fischer, K.H.

    1978-01-01

    Up to present, the non-destructive testing in german steel castings and delivery conditions has hardly been described. DIN 17245 was an exception for heat-resistant ferrite cast steel (July 1967 version) which for the first time contained data on maximum permissible defects in irradiation testing. The US (ultrasonic) method to find internal defects was named together with irradiation, the error limits however were also valid for this method according to the reference picture series of ASTM (American Society for Testing and Materials). It is clear to every practician that especially in the case of steel, due to the numerous possible defects and their unpredictable orientation, it is not always possible to determine the true type of defects based on reflection behaviour of an inhomogenity. In any case one cannot directly compare two physically different methods. If one considers foreign cast steel norms, then one finds somewhat more about non-destructive testing. The set standard measures mostly however take after the irradiation testing guidelines according to ASTM. A Westinghouse regulation, norm ASTM-A-609 and the ASME (Am. Soc. of Mech. Engineers) regulations for components of nuclear reactors are the exception. (orig.) [de

  14. Comparative study between EDXRF and ASTM E572 methods using two-way ANOVA

    Science.gov (United States)

    Krummenauer, A.; Veit, H. M.; Zoppas-Ferreira, J.

    2018-03-01

    Comparison with reference method is one of the necessary requirements for the validation of non-standard methods. This comparison was made using the experiment planning technique with two-way ANOVA. In ANOVA, the results obtained using the EDXRF method, to be validated, were compared with the results obtained using the ASTM E572-13 standard test method. Fisher's tests (F-test) were used to comparative study between of the elements: molybdenum, niobium, copper, nickel, manganese, chromium and vanadium. All F-tests of the elements indicate that the null hypothesis (Ho) has not been rejected. As a result, there is no significant difference between the methods compared. Therefore, according to this study, it is concluded that the EDXRF method was approved in this method comparison requirement.

  15. Overview (this manuscript is an overview of an ASTM symposium. The authors, John Sebroski and Mark Mason, of the overview were the co-chairs of the symposium and co-editors of the manuscripts submitted for ASTM peer review and subsequent publication in the technical proceedings for the symposium)

    Science.gov (United States)

    The Symposium on Developing Consensus Standards for Measuring Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation was held on April 30th and May 1, 2015. Sponsored by ASTM Committee D22 on Air Quality, the symposium was held in Anaheim, CA, in conjunction with the st...

  16. White Paper Summary of 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Louthan, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); PNNL, B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-05-29

    This white paper recommends that ASTM International develop standards to address the potential impact of hydrides on the long term performance of irradiated zirconium alloys. The need for such standards was apparent during the 2nd ASTM International Workshop on Hydrides in Zirconium Alloy Cladding and Assembly Components, sponsored by ASTM International Committee C26.13 and held on June 10-12, 2014, in Jackson, Wyoming. The potentially adverse impacts of hydrogen and hydrides on the long term performance of irradiated zirconium-alloy cladding on used fuel were shown to depend on multiple factors such as alloy chemistry and processing, irradiation and post irradiation history, residual and applied stresses and stress states, and the service environment. These factors determine the hydrogen content and hydride morphology in the alloy, which, in turn, influence the response of the alloy to the thermo-mechanical conditions imposed (and anticipated) during storage, transport and disposal of used nuclear fuel. Workshop presentations and discussions showed that although hydrogen/hydride induced degradation of zirconium alloys may be of concern, the potential for occurrence and the extent of anticipated degradation vary throughout the nuclear industry because of the variations in hydrogen content, hydride morphology, alloy chemistry and irradiation conditions. The tools and techniques used to characterize hydrides and hydride morphologies and their impacts on material performance also vary. Such variations make site-to-site comparisons of test results and observations difficult. There is no consensus that a single material or system characteristic (e.g., reactor type, burnup, hydrogen content, end-of life stress, alloy type, drying temperature, etc.) is an effective predictor of material response during long term storage or of performance after long term storage. Multi-variable correlations made for one alloy may not represent the behavior of another alloy exposed to

  17. Moessbauer spectroscopy study on the corrosion resistance of plasma nitrided ASTM F138 stainless steel in chloride solution

    International Nuclear Information System (INIS)

    Souza, S.D. de; Olzon-Dionysio, M.; Basso, R.L.O.; Souza, S. de

    2010-01-01

    Plasma nitriding of ASTM F138 stainless steel samples has been carried out using dc glow discharge under 80% H 2 -20% N 2 gas mixture, at 673 K, and 2, 4, and 7 h time intervals, in order to investigate the influence of treatment time on the microstructure and the corrosion resistance properties. The samples were characterized by scanning electron microscopy, glancing angle X-ray diffraction and conversion electron Moessbauer spectroscopy, besides electrochemical tests in NaCl aerated solution. A modified layer of about 6 μm was observed for all the nitrided samples, independent of nitriding time. The X-ray diffraction analysis shows broad γ N phase peaks, signifying a great degree of nitrogen supersaturation. Besides γ N, the Moessbauer spectroscopy results indicated the occurrence of γ' and ε phases, as well as some other less important phases. Corrosion measurements demonstrate that the plasma nitriding time affects the corrosion resistance and the best performance is reached at 4 h treatment. It seems that the ε/γ' fraction ratio plays an important role on the resistance corrosion. Additionally, the Moessbauer spectroscopy was decisive in this study, since it was able to identify and quantify the iron phases that influence the corrosion resistance of plasma nitrided ASTM F138 samples.

  18. Phases Evolution of an ASTM 335 steel under continuous cooling P91

    International Nuclear Information System (INIS)

    Carrizo, D.A; Danon, C.A; Ramos, C.P

    2012-01-01

    This paper studies the influence of the cooling rate on phase transformations and the resulting microstructure in continuous cooling cycles for an ASTM A335 P91 steel, under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material is reported in the literature, so the main phase fields are known. The final structure of the samples depends on the austenitic grain size and the cooling rate. The studied samples were austenized at 1050 o C for 30 minutes and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Moessbauer Spectroscopy. From the results so obtained, additions to the CCT diagram of the material are proposed, providing new information to it

  19. 76 FR 63531 - German-American Day, 2011

    Science.gov (United States)

    2011-10-12

    ... Atlantic to seize the promise of the American dream. The same spirit that guided intrepid settlers to help... society, generations of German Americans have helped make America what it is today. The bonds of...

  20. Recommendations for a Standardized Pulmonary Function Report. An Official American Thoracic Society Technical Statement.

    Science.gov (United States)

    Culver, Bruce H; Graham, Brian L; Coates, Allan L; Wanger, Jack; Berry, Cristine E; Clarke, Patricia K; Hallstrand, Teal S; Hankinson, John L; Kaminsky, David A; MacIntyre, Neil R; McCormack, Meredith C; Rosenfeld, Margaret; Stanojevic, Sanja; Weiner, Daniel J

    2017-12-01

    The American Thoracic Society committee on Proficiency Standards for Pulmonary Function Laboratories has recognized the need for a standardized reporting format for pulmonary function tests. Although prior documents have offered guidance on the reporting of test data, there is considerable variability in how these results are presented to end users, leading to potential confusion and miscommunication. A project task force, consisting of the committee as a whole, was approved to develop a new Technical Standard on reporting pulmonary function test results. Three working groups addressed the presentation format, the reference data supporting interpretation of results, and a system for grading quality of test efforts. Each group reviewed relevant literature and wrote drafts that were merged into the final document. This document presents a reporting format in test-specific units for spirometry, lung volumes, and diffusing capacity that can be assembled into a report appropriate for a laboratory's practice. Recommended reference sources are updated with data for spirometry and diffusing capacity published since prior documents. A grading system is presented to encourage uniformity in the important function of test quality assessment. The committee believes that wide adoption of these formats and their underlying principles by equipment manufacturers and pulmonary function laboratories can improve the interpretation, communication, and understanding of test results.

  1. Lolita - the American nightmare

    OpenAIRE

    GRISELDA (ABAZAJ) DANGLLI

    2012-01-01

    This article deals with the analysis of Lolita seen through the lenses of the American society and norms of today. We will see that many observations of the American way of behaving and social norms still hold true even nowadays years after this novel was written. Nabokov, on the other hand, never accepted the fact that this novel probed into the very depths of American life and that his intentions were purely aesthetic. Nevertheless, the phenomenon of pedophilia, obvious in the book, is a po...

  2. A Survey of the American Society of Anesthesiologists Regarding Environmental Attitudes, Knowledge, and Organization.

    Science.gov (United States)

    Ard, John L; Tobin, Katherine; Huncke, Tessa; Kline, Richard; Ryan, Susan M; Bell, Charlotte

    2016-04-01

    Our planet is in the midst of an environmental crisis. Government and international agencies such as the Intergovernmental Panel on Climate Change urge radical and transformative change at every level of how we conduct our personal and professional lives. The health care industry contributes to climate change. According to a study from the University of Chicago, the health care sector accounts for 8% of the United States' total greenhouse gas emissions. In an effort to understand the current state of environmental practice, attitudes, and knowledge among anesthesiologists in the United States, we conducted a survey of American anesthesiologists regarding environmental sustainability. The environmental survey was sent out by e-mail to a random sampling of 5200 members of the American Society of Anesthesiologists. This process was repeated a second time. A total of 2189 anesthesiologists of 5200 responded to the survey, a 42% response rate. Of the survey respondents, 80.1% (confidence interval, 78.2%-81.9%) were interested in recycling. Respondents reported recycling in 27.7% of operating rooms where they work. The majority of respondents (67%; confidence interval, 64%-69%) reported there was insufficient information on how to recycle intraoperatively. Respondents supported sustainability practices such as reprocessing equipment, using prefilled syringes, and donating unused equipment and supplies. The affirmative response rate was 48.4% for reprocessing equipment, 56.6% for using prefilled syringes, and 65.1% for donating equipment and supplies to medical missions. Questions about hospital-wide organization of sustainability programs elicited many "I don't know" responses. Eighteen percent of responders indicated the presence of a sustainability or "green" task force. A total of 12.6% of responders indicated the presence of a mandate from hospital leadership to promote sustainability programs. Two important conclusions drawn from the survey data are a lack of

  3. Asian American Giving to US Higher Education

    Science.gov (United States)

    Tsunoda, Kozue

    2010-01-01

    Asian Americans have had significant impacts on and within mainstream US society, and their great efforts and gifts in the name of charitable causes are no exception. This study aims to examine perceptions within American university development offices about Asian American giving to US higher education. The article begins with a literature review…

  4. Americanization of Non-American Storiesin Disney Films

    Directory of Open Access Journals (Sweden)

    Beta Setiawati

    2016-06-01

    Full Text Available The study is intended to know the Disney’s animation films characteristics which are adapted from non American stories that contain Americanization in order to be American popular culture products. This qualitative and library research is carried out within the field of American Studies. Disney’s animated films which are regarded as artifacts in order to identify American society and culture is used as her primary data. She then compares those Disney films with the original stories to discover the changes in making those stories become American popular products. She furthermore uses the sources such as books, magazines, journals, articles, and also internet data for her secondary data. The result of this study shows that most of folk narratives which were used in Disney films were adapted from other countries’ stories. However, Disney intentionally adapts foreign countries’ stories in its animated films by using Disney formula to blow up the sale of its products. Since Disney is one of the most powerful media conglomerates in the world, it works endlessly to set out world entertainment. Disney formula in its animated films which has dominated those adapted films are only intended to obtain as much profit as possible without paying attention to the values in children entertainment.

  5. Corrosion resistance and durability of superhydrophobic surface formed on magnesium alloy coated with nanostructured cerium oxide film and fluoroalkylsilane molecules in corrosive NaCl aqueous solution.

    Science.gov (United States)

    Ishizaki, Takahiro; Masuda, Yoshitake; Sakamoto, Michiru

    2011-04-19

    The corrosion resistant performance and durability of the superhydrophobic surface on magnesium alloy coated with nanostructured cerium oxide film and fluoroalkylsilane molecules in corrosive NaCl aqueous solution were investigated using electrochemical and contact angle measurements. The durability of the superhydrophobic surface in corrosive 5 wt% NaCl aqueous solution was elucidated. The corrosion resistant performance of the superhydrophobic surface formed on magnesium alloy was estimated by electrochemical impedance spectroscopy (EIS) measurements. The EIS measurements and appropriate equivalent circuit models revealed that the superhydrophobic surface considerably improved the corrosion resistant performance of magnesium alloy AZ31. American Society for Testing and Materials (ASTM) standard D 3359-02 cross cut tape test was performed to investigate the adhesion of the superhydrophobic film to the magnesium alloy surface. The corrosion formation mechanism of the superhydrophobic surface formed on the magnesium alloy was also proposed. © 2011 American Chemical Society

  6. Creating a segregated medical profession: African American physicians and organized medicine, 1846-1910.

    Science.gov (United States)

    Baker, Robert B; Washington, Harriet A; Olakanmi, Ololade; Savitt, Todd L; Jacobs, Elizabeth A; Hoover, Eddie; Wynia, Matthew K; Blanchard, Janice; Boulware, L Ebony; Braddock, Clarence; Corbie-Smith, Giselle; Crawley, LaVera; LaVeist, Thomas A; Maxey, Randall; Mills, Charles; Moseley, Kathryn L; Williams, David R

    2009-06-01

    An independent panel of experts, convened by the American Medical Association (AMA) Institute for Ethics, analyzed the roots of the racial divide within American medical organizations. In this, the first of a 2-part report, we describe 2 watershed moments that helped institutionalize the racial divide. The first occurred in the 1870s, when 2 medical societies from Washington, DC, sent rival delegations to the AMA's national meetings: an all-white delegation from a medical society that the US courts and Congress had formally censured for discriminating against black physicians; and an integrated delegation from a medical society led by physicians from Howard University. Through parliamentary maneuvers and variable enforcement of credentialing standards, the integrated delegation was twice excluded from the AMA's meetings, while the all-white society's delegations were admitted. AMA leaders then voted to devolve the power to select delegates to state societies, thereby accepting segregation in constituent societies and forcing African American physicians to create their own, separate organizations. A second watershed involved AMA-promoted educational reforms, including the 1910 Flexner report. Straightforwardly applied, the report's population-based criterion for determining the need for phySicians would have recommended increased training of African American physicians to serve the approximately 9 million African Americans in the segregated south. Instead, the report recommended closing all but 2 African American medical schools, helping to cement in place an African American educational system that was separate, unequal, and destined to be insufficient to the needs of African Americans nationwide.

  7. Report from the Latin American Spondyloarthritis Society for Education and Research in Immunology and Medicine organization 2012 workshop.

    Science.gov (United States)

    Bautista-Molano, Wilson; Toloza, Sergio; Gutiérrez, Marwin; Uribe, Carlos Vinicio Caballero; Pineda, Carlos; Londoño, John; Santos, Pedro; Jaimes, Diego; Diaz, Mario; Chalem, Phillipe; Villota, Orlando; Sierra, Rita; Puche, William; Salas, José; Yara, José; Hamilton, Gordon; Pardo, Carlos; Mercado, Beatriz; Valle-Oñate, Rafael

    2013-09-01

    The first annual meeting of the Latin American Spondyloarthritis Society for Education and Research in Immunology and Medicine (LASSERIM) was held in Bogotá, Colombia, in September 2012 and was attended by key opinion leaders, researchers, and rheumatologists. The meeting included presentations and discussions from renowned speakers during 2 days and a coaching leadership exercise led by an expert in the field followed by an open forum. Two groups defined a priori discussed the establishment of a professional network and organization to be involved in the identification, assessment, and effective resolution of health care issues in Latin America.A broad spectrum of topics were discussed but focused on the following: pharmacoeconomics in general rheumatology, spondyloarthritis and chronic back pain, therapeutic interventions in rheumatoid arthritis, ultrasonography in spondyloarthritis, impact of social media in medicine and global trends in leadership, quality of life, and innovation. A special workshop on coaching in health care and coaching as a tool to implement LASSERIM goals was part of the 2-day conference.LASSERIM will be working in the future on education, research, and innovation in the field of rheumatology and immunology. A special focus will be on spondyloarthritis, by promoting research, open discussions, and by conducting carefully planned research studies to impact on the quality of life of patients and doctors from Latin American countries.

  8. Effect of using the double layer technique on the microstructure, microhardness and residual stress of welded ASTM A516 GR70 structural steel

    International Nuclear Information System (INIS)

    Oliveira, George Luiz Gomes de; Miranda, Helio Cordeiro de

    2010-01-01

    The aim of this work is to evaluate the effect of using the double layer technique on the microstructure, microhardness and residual stresses of welded ASTM A516 Gr70 structural steel. Samples were welded with the same welding parameters and two types of chamfers, while the samples welded using the double layer technique underwent a buttering process on their chamfer face. Residual stress measurement was accomplished through x-ray diffraction, using a mini diffractometer for measurement in field. Metallographic analysis was accomplished in the transverse section of the welded joint, using optic microscopy and scanning electron microscopy. The double layer technique showed that can be used in the welding of ASTM A516 Gr70 steel, because, besides promote a refinement and a drawing back of the CG-HAZ, it increased compressive residual stress in the whole surface of the analyzed samples.(author)

  9. Effect of increased fuel temperature on emissions of oxides of nitrogen from a gas turbine combustor burning ASTM jet-A fuel

    Science.gov (United States)

    Marchionna, N. R.

    1974-01-01

    An annular gas turbine combustor was tested with heated ASTM Jet-A fuel to determine the effect of increased fuel temperature on the formation of oxides of nitrogen. Fuel temperature ranged from ambient to 700 K. The NOx emission index increased at a rate of 6 percent per 100 K increase in fuel temperature.

  10. An American Thoracic Society Official Research Statement: Future Directions in Lung Fibrosis Research.

    Science.gov (United States)

    White, Eric S; Borok, Zea; Brown, Kevin K; Eickelberg, Oliver; Guenther, Andreas; Jenkins, R Gisli; Kolb, Martin; Martinez, Fernando J; Roman, Jesse; Sime, Patricia

    2016-04-01

    Pulmonary fibrosis encompasses a group of lung-scarring disorders that occur owing to known or unknown insults and accounts for significant morbidity and mortality. Despite intense investigation spanning decades, much remains to be learned about the natural history, pathophysiology, and biologic mechanisms of disease. To identify the most pressing research needs in the lung fibrosis community and to provide a roadmap of priorities to investigators, funding agencies, patient advocacy groups, and other interested stakeholders. An ad hoc international working group of the American Thoracic Society with experience in clinical, translational, and bench-based research in fibrotic lung diseases was convened. The group used an iterative consensus process to identify successes and challenges in pulmonary fibrosis research. The group identified five main priority areas in which substantial resources should be invested to advance our understanding and to develop novel therapies for patients with pulmonary fibrosis. These priorities include develop newer models of human lung fibrosis, engage current and new stakeholders to provide sustained funding for the initiatives, create a global infrastructure for storing patient-derived materials, establish collaborative preclinical and clinical research networks in fibrotic lung disease, and create a global lung fibrosis initiative that unites these multifaceted efforts into a single virtual umbrella structure. Despite recent advances in the treatment of some forms of lung fibrosis, many gaps in knowledge about natural history, pathophysiology, and treatment remain. Investment in the research priorities enumerated above will help address these shortcomings and enhance patient care worldwide.

  11. American Society of Clinical Oncology Strategic Plan for Increasing Racial and Ethnic Diversity in the Oncology Workforce.

    Science.gov (United States)

    Winkfield, Karen M; Flowers, Christopher R; Patel, Jyoti D; Rodriguez, Gladys; Robinson, Patricia; Agarwal, Amit; Pierce, Lori; Brawley, Otis W; Mitchell, Edith P; Head-Smith, Kimberly T; Wollins, Dana S; Hayes, Daniel F

    2017-08-01

    In December 2016, the American Society of Clinical Oncology (ASCO) Board of Directors approved the ASCO Strategic Plan to Increase Racial and Ethnic Diversity in the Oncology Workforce. Developed through a multistakeholder effort led by the ASCO Health Disparities Committee, the purpose of the plan is to guide the formal efforts of ASCO in this area over the next three years (2017 to 2020). There are three primary goals: (1) to establish a longitudinal pathway for increasing workforce diversity, (2) to enhance ASCO leadership diversity, and (3) to integrate a focus on diversity across ASCO programs and policies. Improving quality cancer care in the United States requires the recruitment of oncology professionals from diverse backgrounds. The ASCO Strategic Plan to Increase Racial and Ethnic Diversity in the Oncology Workforce is designed to enhance existing programs and create new opportunities that will move us closer to the vision of achieving an oncology workforce that reflects the demographics of the US population it serves.

  12. Hedonism And Materialism As Negative Effects Of Social Changes In American Society Potrayed In The Novel This Side Of Paradise Written By F. Scott Fitzgerald

    OpenAIRE

    Elysia, Irene Nyssa

    2015-01-01

    Judul skripsi ini adalah ‘HEDONISM AND MATERIALISM AS NEGATIVE EFFECTS OF SOCIAL CHANGES IN AMERICAN SOCIETY POTRAYED IN THE NOVEL THIS SIDE OF PARADISE WRITTEN BY F. SCOTT FITZGERALD’. Sesuai dengan judulnya, skripsi ini membahas tentang fenomena hedonisme dan materialisme yang terjadi di Amerika pada awal tahun 1920an, sebagai dampak negatif dari Perang Dunia I. Fenomena ini dapat dibuktikan dari gambaran yang dipaparkan oleh Scott melalui novel ini, yaitu tentang kondisi masyarakat terutam...

  13. Interventional Spine and Pain Procedures in Patients on Antiplatelet and Anticoagulant Medications (Second Edition): Guidelines From the American Society of Regional Anesthesia and Pain Medicine, the European Society of Regional Anaesthesia and Pain Therapy, the American Academy of Pain Medicine, the International Neuromodulation Society, the North American Neuromodulation Society, and the World Institute of Pain.

    Science.gov (United States)

    Narouze, Samer; Benzon, Honorio T; Provenzano, David; Buvanendran, Asokumar; De Andres, José; Deer, Timothy; Rauck, Richard; Huntoon, Marc A

    2018-04-01

    The American Society of Regional Anesthesia and Pain Medicine (ASRA) 2012 survey of meeting attendees showed that existing ASRA anticoagulation guidelines for regional anesthesia were insufficient for their needs. Those surveyed agreed that procedure-specific and patient-specific factors required separate guidelines for pain and spine procedures. In response, a guidelines committee was formed. After preliminary review of published complications reports and studies, the committee stratified interventional spine and pain procedures according to potential bleeding risk: low-, intermediate-, and high-risk procedures. The ASRA regional anesthesia anticoagulation guidelines were largely deemed appropriate for the low- and intermediate-risk categories, but the high-risk category required further investigation. The first guidelines specific to interventional spine and pain procedures were published in 2015. Recent reviews evaluating bleeding complications in patients undergoing specific interventional pain procedures, the development of new regional anesthesia and acute pain guidelines, and the development of new anticoagulants and antiplatelet medications necessitate complementary updated guidelines. The authors desired coordination with the authors of the recently updated regional and acute pain anticoagulation guidelines. The latest evidence was sought through extensive database search strategies and the recommendations were evidence based when available and pharmacology driven otherwise. We could not provide strength and grading of these recommendations because there are not enough well-designed large studies concerning interventional pain procedures to support such grading. Although the guidelines could not always be based on randomized studies or on large numbers of patients from pooled databases, it is hoped that they will provide sound recommendations and the evidentiary basis for such recommendations. This publication is intended as a living document to be updated

  14. Microstructure evolution of ASTM 335 P91 steel, subjected to continuous cooling

    International Nuclear Information System (INIS)

    Carrizo, D.A; Danon, C.A; Ramos, C.P

    2012-01-01

    This paper studies the influence of the cooling rate on an isothermal phase transformations in ASTM A335 P91 steel, by the analysis of the resulting microstructure after several continuous cooling cycles under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material has already been reported in the literature, so the main phase fields are known, and they depend on the austenitic grain size and the cooling rate. Five samples were tested in a dilatometer, they were austenized and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the resulting phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Mossbauer Spectroscopy. The obtained results allowed to add information about the presence of retained austenite and (Fe,Cr) 3 C - type carbides to the CCT diagram of the material (author)

  15. The European Society of Regional Anaesthesia and Pain Therapy/American Society of Regional Anesthesia and Pain Medicine Recommendations on Local Anesthetics and Adjuvants Dosage in Pediatric Regional Anesthesia.

    Science.gov (United States)

    Suresh, Santhanam; Ecoffey, Claude; Bosenberg, Adrian; Lonnqvist, Per-Anne; de Oliveira, Gildasio S; de Leon Casasola, Oscar; de Andrés, José; Ivani, Giorgio

    2018-02-01

    Dosage of local anesthetics (LAs) used for regional anesthesia in children is not well determined. In order to evaluate and come to a consensus regarding some of these controversial topics, The European Society of Regional Anaesthesia and Pain Therapy (ESRA) and the American Society of Regional Anesthesia and Pain Medicine (ASRA) developed a Joint Committee Practice Advisory on Local Anesthetics and Adjuvants Dosage in Pediatric Regional Anesthesia. Representatives from both ASRA and ESRA composed the joint committee practice advisory. Evidence-based recommendations were based on a systematic search of the literature. In cases where no literature was available, expert opinion was elicited. Spinal anesthesia with bupivacaine can be performed with a dose of 1 mg/kg for newborn and/or infant and a dose of 0.5 mg/kg in older children (>1 year of age). Tetracaine 0.5% is recommended for spinal anesthesia (dose, 0.07-0.13 mL/kg). Ultrasound-guided upper-extremity peripheral nerve blocks (eg, axillary, infraclavicular, interscalene, supraclavicular) in children can be performed successfully and safely using a recommended LA dose of bupivacaine or ropivacaine of 0.5 to 1.5 mg/kg. Dexmedetomidine can be used as an adjunct to prolong the duration of peripheral nerve blocks in children. High-level evidence is not yet available to guide dosage of LA used in regional blocks in children. The ASRA/ESRA recommendations intend to provide guidance in order to reduce the large variability of LA dosage currently observed in clinical practice.

  16. Screening Out Controversy: Human Genetics, Emerging Techniques of Diagnosis, and the Origins of the Social Issues Committee of the American Society of Human Genetics, 1964-1973.

    Science.gov (United States)

    Mitchell, M X

    2017-05-01

    In the years following World War II, and increasingly during the 1960s and 1970s, professional scientific societies developed internal sub-committees to address the social implications of their scientific expertise (Moore, Disrupting Science: Social Movements, American Scientists, and the Politics of the Military, 1945-1975. Princeton: Princeton University Press, 2008). This article explores the early years of one such committee, the American Society of Human Genetics' "Social Issues Committee," founded in 1967. Although the committee's name might suggest it was founded to increase the ASHG's public and policy engagement, exploration of the committee's early years reveals a more complicated reality. Affronted by legislators' recent unwillingness to seek the expert advice of human geneticists before adopting widespread neonatal screening programs for phenylketonuria (PKU), and feeling pressed to establish their relevance in an increasingly resource-scarce funding environment, committee members sought to increase the discipline's expert authority. Painfully aware of controversy over abortion rights and haunted by the taint of the discipline's eugenic past, however, the committee proceeded with great caution. Seeking to harness interest in and assert professional control over emerging techniques of genetic diagnosis, the committee strove to protect the society's image by relegating ethical and policy questions about their use to the individual consciences of member scientists. It was not until 1973, after the committee's modest success in organizing support for a retrospective public health study of PKU screening and following the legalization of abortion on demand, that the committee decided to take a more publicly engaged stance.

  17. November 2017 Arizona thoracic society notes

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2017-11-01

    Full Text Available No abstract available. Article truncated after 150 words. The November 2017 Arizona Thoracic Society meeting was held on Wednesday, November 15, 2017 at the HonorHealth Rehabilitation Hospital beginning at 6:30 PM. This was a dinner meeting with a lecture followed by case presentations. There were 15 in attendance representing the pulmonary, critical care, sleep, allergy, infectious disease and radiology communities. At the beginning of the meeting several issues were discussed: 1. CME offered by the Southwest Journal of Pulmonary and Critical Care Medicine (SWJPCC is currently offered to only the Southwest state thoracic societies and the Mayo Clinic. After discussion it was felt that this restriction of access was no longer appropriate and CME credits should be available to all. 2. Efforts continue to obtain CME for the Arizona Thoracic Society meetings. Our Chapter Representative, Dr. Gerry Schwartzberg, is approaching this with the American Thoracic Society. Locally, HonorHealth sent out a survey on CME needs. Members were encouraged …

  18. April 2014 Arizona thoracic society notes

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2014-04-01

    Full Text Available No abstract available. Article truncated at 150 words. The April 2014 Arizona Thoracic Society meeting was held on Wednesday, 4/23/2014 at Scottsdale Shea Hospital beginning at 6:30 PM. There were 15 in attendance representing the pulmonary, critical care, sleep, pathology and radiology communities. It was announced that there will be a wine tasting with the California, New Mexico and Colorado Thoracic Societies at the American Thoracic Society International Meeting. The tasting will be led by Peter Wagner and is scheduled for the Cobalt Room in the Hilton San Diego Bayfront on Tuesday, May 20, from 4-8 PM. Guideline development was again discussed. The consensus was to await publication of the IDSA Cocci Guidelines and respond appropriately. George Parides, Arizona Chapter Representative, gave a presentation on Hill Day. Representatives of the Arizona, New Mexico and Washington Thoracic Societies met with their Congressional delegations, including Rep. David Schweikert, to discuss the Cigar Bill, NIH funding, and the Medicare Sustainable Growth ...

  19. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 2

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

  20. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 2

    Science.gov (United States)

    Bannerot, Richard B.; Goldstein, Stanley H.

    1989-01-01

    The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JCS. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

  1. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1989, volume 1

    Science.gov (United States)

    Jones, William B., Jr. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1989 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by Texas A and M University and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are: (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers.

  2. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program 1988, volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1989-01-01

    The 1988 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and in 1964 nationally, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objectives of the NASA Centers.

  3. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 2

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1992-01-01

    The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document contains reports 13 through 24.

  4. National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program, 1992, volume 1

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Goldstein, Stanley H. (Editor)

    1992-01-01

    The 1992 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, Washington, DC. The objectives of the program, which began nationally in 1964 and at JSC in 1965, are (1) to further the professional knowledge of qualified engineering and science faculty members; (2) to stimulate an exchange of ideas between participants and NASA; (3) to enrich and refresh the research and teaching activities of participants' institutions; and (4) to contribute to the research objective of the NASA Centers. This document is a compilation of the final reports 1 through 12.

  5. Ethnic Minority Psychological Associations and the Society of Counseling Psychology: Greater Connections

    Science.gov (United States)

    Lau, Michael Y.; Forrest, Linda; Delgado-Romero, Edward A.

    2012-01-01

    This article provides a summary of the Major Contribution on the Ethnic Minority Psychological Associations (Asian American Psychological Association, The Association of Black Psychologists, National Latina/o Psychological Association, Society of Indian Psychologists, and American Psychological Association Division 45) and their connections to…

  6. An investigation of force components in orthogonal cutting of medical grade cobalt-chromium alloy (ASTM F1537).

    Science.gov (United States)

    Baron, Szymon; Ahearne, Eamonn

    2017-04-01

    An ageing population, increased physical activity and obesity are identified as lifestyle changes that are contributing to the ongoing growth in the use of in-vivo prosthetics for total hip and knee arthroplasty. Cobalt-chromium-molybdenum (Co-Cr-Mo) alloys, due to their mechanical properties and excellent biocompatibility, qualify as a class of materials that meet the stringent functional requirements of these devices. To cost effectively assure the required dimensional and geometric tolerances, manufacturers rely on high-precision machining. However, a comprehensive literature review has shown that there has been limited research into the fundamental mechanisms in mechanical cutting of these alloys. This article reports on the determination of the basic cutting-force coefficients in orthogonal cutting of medical grade Co-Cr-Mo alloy ASTM F1537 over an extended range of cutting speeds ([Formula: see text]) and levels of undeformed chip thickness ([Formula: see text]). A detailed characterisation of the segmented chip morphology over this range is also reported, allowing for an estimation of the shear plane angle and, overall, providing a basis for macro-mechanic modelling of more complex cutting processes. The results are compared with a baseline medical grade titanium alloy, Ti-6Al-4V ASTM F136, and it is shown that the tangential and thrust-force components generated were, respectively, ≈35% and ≈84% higher, depending primarily on undeformed chip thickness but with some influence of the cutting speed.

  7. Comparison of Performance Characteristics of American College of Radiology TI-RADS, Korean Society of Thyroid Radiology TIRADS, and American Thyroid Association Guidelines.

    Science.gov (United States)

    Middleton, William D; Teefey, Sharlene A; Reading, Carl C; Langer, Jill E; Beland, Michael D; Szabunio, Margaret M; Desser, Terry S

    2018-05-01

    The American College of Radiology (ACR) Thyroid Imaging Reporting and Data System (TI-RADS) provides guidelines to practitioners who interpret sonographic examinations of thyroid nodules. The purpose of this study is to compare the ACR TI-RADS system with two other well-established guidelines. The ACR TI-RADS, the Korean Society of Thyroid Radiology (KSThR) Thyroid Imaging Reporting and Data System (TIRADS), and the American Thyroid Association guidelines were compared using 3422 thyroid nodules for which pathologic findings were available. The composition, echogenicity, margins, echogenic foci, and size of the nodules were assessed to determine whether a recommendation would be made for fine-needle aspiration or follow-up sonography when each system was used. The biopsy yield of malignant findings, the yield of follow-up, and the percentage of malignant and benign nodules that would be biopsied were determined for all nodules and for nodules 1 cm or larger. The percentage of nodules that could not be classified was 0%, 3.9%, and 13.9% for the ACR TI-RADS, KSThR TIRADS, and ATA guidelines, respectively. The biopsy yield of malignancy was 14.2%, 10.2%, and 10.0% for nodules assessed by the ACR TI-RADS, KSThR TIRADS, and ATA guidelines, respectively. The percentage of malignant nodules that were biopsied was 68.2%, 78.7%, and 75.9% for the ACR TI-RADS, the KSThR TIRADS, and the ATA guidelines, respectively, whereas the percentage of malignant nodules that would be either biopsied or followed was 89.2% for the ACR TI-RADS. The percentage of benign nodules that would be biopsied was 47.1%, 79.7%, and 78.1% for the ACR TI-RADS, the KSThR TIRADS, and the ATA guidelines, respectively. The percentage of benign nodules that would be either biopsied or followed was 65.2% for the ACR TI-RADS. The ACR TI-RADS performs well when compared with other well-established guidelines.

  8. Embryo transfer techniques: an American Society for Reproductive Medicine survey of current Society for Assisted Reproductive Technology practices.

    Science.gov (United States)

    Toth, Thomas L; Lee, Malinda S; Bendikson, Kristin A; Reindollar, Richard H

    2017-04-01

    To better understand practice patterns and opportunities for standardization of ET. Cross-sectional survey. Not applicable. Not applicable. An anonymous 82-question survey was emailed to the medical directors of 286 Society for Assisted Reproductive Technology member IVF practices. A follow-up survey composed of three questions specific to ET technique was emailed to the same medical directors. Descriptive statistics of the results were compiled. The survey assessed policies, protocols, restrictions, and specifics pertinent to the technique of ET. There were 117 (41%) responses; 32% practice in academic settings and 68% in private practice. Responders were experienced clinicians, half of whom had performed Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  9. Designing cathodic protection systems for marine structures and vehicles. ASTM special technical publication 1370

    Energy Technology Data Exchange (ETDEWEB)

    Hack, H.P. [ed.

    1999-07-01

    Cathodic protection is an important method of protecting structures and ships from the corrosive effects of seawater. Poor designs can be far more costly to implement than optimal designs, Improper design can cause overprotection, with resulting paint blistering and accelerated corrosion of some alloys, underprotection, with resultant structure corrosion, or stray current corrosion of nearby structures. The first ASTM symposium specifically aimed at cathodic protection in seawater was intended to compile all the criteria and philosophy for designing both sacrificial and impressed current cathodic protection systems for structures and vehicles in seawater. The papers which are included in this STP are significant in that they summarize the major seawater cathodic protection system design philosophies. Papers have been processed separately for inclusion on the database.

  10. Orlando Magic: report from the 57th meeting of the American Society of Haematology, 5-7 December 2015, Orlando, USA.

    Science.gov (United States)

    Mazzarella, Luca

    2016-01-01

    The 57th American Society of Haematology (ASH) meeting held in Orlando, FL was certainly the year when myeloma management changed for good, with a plethora of newly Food and Drug Administration (FDA)-approved drugs showing impressive outcome improvements and the introduction of new techniques for disease monitoring. Also, chimeric antigen receptor (CAR) T cells continued their triumphal march, consolidating their success in lymphoma and chronic lymhocytic leukaemia (CLL) and venturing into new fields such as again multiple myeloma. Some experimental drugs showed long-awaited results (midostaurin in FLT3-mutated acute myeloid leukaemia (AML)) and some brand new drugs showed promising results in the clinic after extensive preclinical studies, such as those targeting new epigenetic factors (histone methyltransferases) and apoptosis.

  11. Globalization and State–Society Relations in Africa

    African Journals Online (AJOL)

    sulaiman.adebowale

    2008-10-20

    Oct 20, 2008 ... Department of African and African American Studies, Pennsylvania State .... higher taxes and state provision of greater public services (Findlay and Wellisz ... the impacts of new globalization on state–society relations in Africa is placed ... In any case, the experience of Africa's incorporation into the global.

  12. American brachytherapy society recommends no change for prostate permanent implant dose prescriptions using iodine-125 or palladium-103

    International Nuclear Information System (INIS)

    Rivard, M.J.; Butler, W.M.; Merrick, G.S.; Devlin, P.M.; Hayes, J.K.; Hearn, R.A.; Lief, E.P.; Meigooni, A.S.; Williamson, J.F.

    2008-01-01

    Purpose - In 2004, the American Association of Physicists in Medicine (AAPM) issued a report outlining recommended 125 I and 103 Pd datasets for consistency in calculating brachytherapy dose distributions. In 2005, to aid evaluating the clinical impact of implementing these datasets, the AAPM assessed the historical dependence of how prescribed doses differed from administered doses for 125 I and 103 Pd for permanent implantation of the prostate. Consequently, the American Brachytherapy Society (ABS) considered the nature of these changes towards issuing recommended dose prescriptions for 125 I and 103 Pd interstitial brachytherapy implants for mono-therapy and standard boosts. Methods and materials - An investigation was performed of the 2005 AAPM analysis to determine changes in administered dose while affixing prescribed dose using 2004 AAPM 125 I and 103 Pd brachytherapy dosimetry datasets for prostate implants. For 125 I and 103 Pd, administered dose would change by +1.4% and +4.2%, respectively. The biological and societal impact of changing prescribed dose was considered. Results - Based on the need for clinical constancy and in recognition of overall uncertainties, the ABS recommends immediate implementation of the 2004 AAPM consensus brachytherapy dosimetry datasets and no changes to 125 I and 103 Pd dose prescriptions at this time. Conclusions - Radiation oncologists should continue to prescribe mono-therapy doses of 145 Gy and 125 Gy for 125 I and 105 Pd, respectively, and standard boost doses of 100-110 Gy and 90-100 Gy for 125 I and 103 Pd, respectively. (authors)

  13. Hormonal Replacement in Hypopituitarism in Adults: An Endocrine Society Clinical Practice Guideline.

    Science.gov (United States)

    Fleseriu, Maria; Hashim, Ibrahim A; Karavitaki, Niki; Melmed, Shlomo; Murad, M Hassan; Salvatori, Roberto; Samuels, Mary H

    2016-11-01

    To formulate clinical practice guidelines for hormonal replacement in hypopituitarism in adults. The participants include an Endocrine Society-appointed Task Force of six experts, a methodologist, and a medical writer. The American Association for Clinical Chemistry, the Pituitary Society, and the European Society of Endocrinology co-sponsored this guideline. The Task Force developed this evidence-based guideline using the Grading of Recommendations, Assessment, Development, and Evaluation system to describe the strength of recommendations and the quality of evidence. The Task Force commissioned two systematic reviews and used the best available evidence from other published systematic reviews and individual studies. One group meeting, several conference calls, and e-mail communications enabled consensus. Committees and members of the Endocrine Society, the American Association for Clinical Chemistry, the Pituitary Society, and the European Society of Endocrinology reviewed and commented on preliminary drafts of these guidelines. Using an evidence-based approach, this guideline addresses important clinical issues regarding the evaluation and management of hypopituitarism in adults, including appropriate biochemical assessments, specific therapeutic decisions to decrease the risk of co-morbidities due to hormonal over-replacement or under-replacement, and managing hypopituitarism during pregnancy, pituitary surgery, and other types of surgeries.

  14. White Racist Ideology and the Myth of a Postracial Society

    Science.gov (United States)

    Colin, Scipio A. J., III

    2010-01-01

    When America's so-called postracial society is not viewed and assessed through the prism of white racism, the authentic lived realities of people of color become quite clear. There will be some who will reject the use of the term "white racism," but the facts are that "(1) racism permeates the roots of American society and is reflected in all its…

  15. The American Society for Radiation Oncology's 2015 Core Physics Curriculum for Radiation Oncology Residents

    Energy Technology Data Exchange (ETDEWEB)

    Burmeister, Jay, E-mail: burmeist@karmanos.org [Department of Oncology, Karmanos Cancer Center/Wayne State University, Detroit, Michigan (United States); Chen, Zhe [Department of Therapeutic Radiology, Yale University, New Haven, Connecticut (United States); Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Dieterich, Sonja [Department of Radiation Oncology, University of California – Davis, Sacramento, California (United States); Doemer, Anthony [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Dominello, Michael M. [Department of Oncology, Karmanos Cancer Center/Wayne State University, Detroit, Michigan (United States); Howell, Rebecca M. [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); McDermott, Patrick [Department of Radiation Oncology, Beaumont Health, Royal Oak, Michigan (United States); Nalichowski, Adrian [Karmanos Cancer Center, Detroit, Michigan (United States); Prisciandaro, Joann [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Ritter, Tim [VA Ann Arbor Healthcare and the University of Michigan, Ann Arbor, Michigan (United States); Smith, Chadd [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Schreiber, Eric [Department of Radiation Oncology, University of North Carolina, Chapel Hill, North Carolina (United States); Shafman, Timothy [21st Century Oncology, Fort Myers, Florida (United States); Sutlief, Steven [Department of Radiation Oncology, University of California – San Diego, La Jolla, California (United States); Xiao, Ying [Department of Radiation Oncology, Thomas Jefferson University, Philadelphia, Pennsylvania (United States)

    2016-07-15

    Purpose: The American Society for Radiation Oncology (ASTRO) Physics Core Curriculum Subcommittee (PCCSC) has updated the recommended physics curriculum for radiation oncology resident education to improve consistency in teaching, intensity, and subject matter. Methods and Materials: The ASTRO PCCSC is composed of physicists and physicians involved in radiation oncology residency education. The PCCSC updated existing sections within the curriculum, created new sections, and attempted to provide additional clinical context to the curricular material through creation of practical clinical experiences. Finally, we reviewed the American Board of Radiology (ABR) blueprint of examination topics for correlation with this curriculum. Results: The new curriculum represents 56 hours of resident physics didactic education, including a 4-hour initial orientation. The committee recommends completion of this curriculum at least twice to assure both timely presentation of material and re-emphasis after clinical experience. In addition, practical clinical physics and treatment planning modules were created as a supplement to the didactic training. Major changes to the curriculum include addition of Fundamental Physics, Stereotactic Radiosurgery/Stereotactic Body Radiation Therapy, and Safety and Incidents sections, and elimination of the Radiopharmaceutical Physics and Dosimetry and Hyperthermia sections. Simulation and Treatment Verification and optional Research and Development in Radiation Oncology sections were also added. A feedback loop was established with the ABR to help assure that the physics component of the ABR radiation oncology initial certification examination remains consistent with this curriculum. Conclusions: The ASTRO physics core curriculum for radiation oncology residents has been updated in an effort to identify the most important physics topics for preparing residents for careers in radiation oncology, to reflect changes in technology and practice since

  16. Fire Safety Tests for Spherical Resorcinol Formaldehyde Resin: Data Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong-Sang; Peterson, Reid A.; Schweiger, Michael J.

    2012-07-30

    A draft safety evaluation of the scenario for spherical resorcinol-formaldehyde (SRF) resin fire inside the ion exchange column was performed by the Hanford Tank Waste Treatment and Immobilization Plant (WTP) Fire Safety organization. The result of this draft evaluation suggested a potential change of the fire safety classification for the Cesium Ion Exchange Process System (CXP) emergency elution vessels, equipment, and piping, which may be overly bounding based on the fire performance data from the manufacturer of the ion exchange resin selected for use at the WTP. To resolve this question, the fire properties of the SRF resin were measured by Southwest Research Institute (SwRI), following the American Society for Testing and Materials (ASTM) standard procedures, through a subcontract managed by Pacific Northwest National Laboratory (PNNL). For some tests, the ASTM standard procedures were not entirely appropriate or practical for the SRF resin material, so the procedures were modified and deviations from the ASTM standard procedures were noted. This report summarizes the results of fire safety tests performed and reported by SwRI. The efforts by PNNL were limited to summarizing the test results provided by SwRI into one consolidated data report. All as-received SwRI reports are attached to this report in the Appendix. Where applicable, the precision and bias of each test method, as given by each ASTM standard procedure, are included and compared with the SwRI test results of the SRF resin.

  17. Model of ASTM Flammability Test in Microgravity: Iron Rods

    Science.gov (United States)

    Steinberg, Theodore A; Stoltzfus, Joel M.; Fries, Joseph (Technical Monitor)

    2000-01-01

    There is extensive qualitative results from burning metallic materials in a NASA/ASTM flammability test system in normal gravity. However, this data was shown to be inconclusive for applications involving oxygen-enriched atmospheres under microgravity conditions by conducting tests using the 2.2-second Lewis Research Center (LeRC) Drop Tower. Data from neither type of test has been reduced to fundamental kinetic and dynamic systems parameters. This paper reports the initial model analysis for burning iron rods under microgravity conditions using data obtained at the LERC tower and modeling the burning system after ignition. Under the conditions of the test the burning mass regresses up the rod to be detached upon deceleration at the end of the drop. The model describes the burning system as a semi-batch, well-mixed reactor with product accumulation only. This model is consistent with the 2.0-second duration of the test. Transient temperature and pressure measurements are made on the chamber volume. The rod solid-liquid interface melting rate is obtained from film records. The model consists of a set of 17 non-linear, first-order differential equations which are solved using MATLAB. This analysis confirms that a first-order rate, in oxygen concentration, is consistent for the iron-oxygen kinetic reaction. An apparent activation energy of 246.8 kJ/mol is consistent for this model.

  18. Defining New Roles for Scientific Professional Organizations in Society?

    Science.gov (United States)

    Robock, A.; Byrne, J.

    2007-12-01

    The obfuscation of authentic science information in North America has reached epidemic proportions. The global warming debate is a classic example - there are a virtual unanimity and overwhelming evidence from scientific community that the Earth is warming rapidly and humans are an important cause, but there is confusion in the media and the public, partly as a result of disinformation campaigns by greenhouse gas polluters. Should the role of scientists in informing the public change in response to this? What should be the role of scientific societies, such as the American Geophysical Union, the American Meteorological Society, or the American Association for the Advancement of Science? Should we continue doing what we are doing, or be more proactive in using new technology to educate the public on important scientific issues? Should we devote resources to television advertisements? Should we support ads in the print media? This talk will discuss the pros and cons of individual and group actions in making the case in public for science, and suggest some new directions.

  19. Fitting psychometric functions using a fixed-slope parameter: an advanced alternative for estimating odor thresholds with data generated by ASTM E679.

    Science.gov (United States)

    Peng, Mei; Jaeger, Sara R; Hautus, Michael J

    2014-03-01

    Psychometric functions are predominately used for estimating detection thresholds in vision and audition. However, the requirement of large data quantities for fitting psychometric functions (>30 replications) reduces their suitability in olfactory studies because olfactory response data are often limited (ASTM) E679. The slope parameter of the individual-judge psychometric function is fixed to be the same as that of the group function; the same-shaped symmetrical sigmoid function is fitted only using the intercept. This study evaluated the proposed method by comparing it with 2 available methods. Comparison to conventional psychometric functions (fitted slope and intercept) indicated that the assumption of a fixed slope did not compromise precision of the threshold estimates. No systematic difference was obtained between the proposed method and the ASTM method in terms of group threshold estimates or threshold distributions, but there were changes in the rank, by threshold, of judges in the group. Overall, the fixed-slope psychometric function is recommended for obtaining relatively reliable individual threshold estimates when the quantity of data is limited.

  20. Conflict of interest and professional medical associations: the North American Spine Society experience.

    Science.gov (United States)

    Schofferman, Jerome A; Eskay-Auerbach, Marjorie L; Sawyer, Laura S; Herring, Stanley A; Arnold, Paul M; Muehlbauer, Eric J

    2013-08-01

    Recently the financial relationships between industry and professional medical associations have come under increased scrutiny because of the concern that industry ties may create real or perceived conflicts of interest. Professional medical associations pursue public advocacy as well as promote medical education, develop clinical practice guidelines, fund research, and regulate professional conduct. Therefore, the conflicts of interest of a professional medical association and its leadership can have more far-reaching effects on patient care than those of an individual physician. Few if any professional medical associations have reported their experience with implementing strict divestment and disclosure policies, and among the policies that have been issued, there is little uniformity. We describe the experience of the North American Spine Society (NASS) in implementing comprehensive conflicts of interest policies. A special feature article. We discuss financial conflicts of interest as they apply to professional medical associations rather than to individual physicians. We describe the current policies of disclosure and divestment adopted by the NASS and how these policies have evolved, been refined, and have had no detrimental impact on membership, attendance at annual meetings, finances, or leadership recruitment. No funding was received for this work. The authors report no potential conflict-of-interest-associated biases in the text. The NASS has shown that a professional medical association can manage its financial relationships with industry in a manner that minimizes influence and bias. The NASS experience can provide a template for other professional medical associations to help manage their own possible conflicts of interest issues. Copyright © 2013 Elsevier Inc. All rights reserved.

  1. The american brachytherapy society recommendations for permanent prostate brachytherapy postimplant dosimetric analysis

    International Nuclear Information System (INIS)

    Nag, Subir; Bice, William; Wyngaert, Keith de; Prestidge, Bradley; Stock, Richard; Yu Yan

    2000-01-01

    Purpose: The purpose of this report is to establish guidelines for postimplant dosimetric analysis of permanent prostate brachytherapy. Methods: Members of the American Brachytherapy Society (ABS) with expertise in prostate dosimetry evaluation performed a literature review and supplemented with their clinical experience formulated guidelines for performing and analyzing postimplant dosimetry of permanent prostate brachytherapy. Results: The ABS recommends that postimplant dosimetry should be performed on all patients undergoing permanent prostate brachytherapy for optimal patient care. At present, computed tomography (CT)-based dosimetry is recommended, based on availability cost and the ability to image the prostate as well as the seeds. Additional plane radiographs should be obtained to verify the seed count. Until the ideal postoperative interval for CT scanning has been determined, each center should perform dosimetric evaluation of prostate implants at a consistent postoperative interval. This interval should be reported. Isodose displays should be obtained at 50%, 80%, 90%, 100%, 150%, and 200% of the prescription dose and displayed on multiple cross-sectional images of the prostate. A dose-volume histogram (DVH) of the prostate should be performed and the D 90 (dose to 90% of the prostate gland) reported by all centers. Additionally, the D 80, D 100, the fractional V 80, V 90, V 100, V 150, and V 200, (i.e., the percentage of prostate volume receiving 80%, 90%, 100%, 150%, and 200% of the prescribed dose, respectively), the rectal, and urethral doses should be reported and ultimately correlated with clinical outcome in the research environment. On-line real-time dosimetry, the effects of dose heterogeneity, and the effects of tissue heterogeneity need further investigation. Conclusion: It is essential that postimplant dosimetry should be performed on all patients undergoing permanent prostate brachytherapy. Guidelines were established for the performance

  2. [Influence of mechanical effect due to MRI-magnet on tattoo seal and eye makeup].

    Science.gov (United States)

    Morishita, Yuta; Miyati, Tosiaki; Ueda, Jousei; Shimizu, Mitsuru; Hamaguchi, Takashi; Fujiwara, Yasuhiro; Hayashi, Hiroyuki

    2008-05-20

    The purpose of our study was to assess the mechanical effect on tattoo seals and eye makeup caused by a spatial magnetic gradient in the magnetic resonance imaging (MRI) system. Seven kinds of tattoo seals and three kinds of eye makeup, i.e., mascara, eye shadow, and eyeliner were used. On a 3.0-Tesla MRI, we determined these deflection angles according to a method established by the American Society for Testing and Materials (ASTM) at the position that produced the greatest magnetically induced deflection. Eighty-five percent of the tattoo seals showed deflection angles greater than 45 degrees of the ASTM guidelines, and the mascara and eye shadow showed over 40 degrees. This was because these contained ferromagnetic pigments such as an iron oxide, but those translational forces were very small owing to slight mass. However, it is desirable that these should be removed before MRI examination to prevent secondary problems.

  3. Influence of mechanical effect due to MRI-magnet on tattoo seal and eye makeup

    International Nuclear Information System (INIS)

    Morishita, Yuta; Ueda, Jousei; Miyati, Tosiaki; Hamaguchi, Takashi; Shimizu, Mitsuru; Fujiwara, Yasuhiro; Hayashi, Hiroyuki

    2008-01-01

    The purpose of our study was to assess the mechanical effect on tattoo seals and eye makeup caused by a spatial magnetic gradient in the magnetic resonance imaging (MRI) system. Seven kinds of tattoo seals and three kinds of eye makeup, i.e., mascara, eye shadow, and eyeliner were used. On a 3.0-Tesla MRI, we determined these deflection angles according to a method established by the American Society for Testing and Materials (ASTM) at the position that produced the greatest magnetically induced deflection. Eighty-five percent of the tattoo seals showed deflection angles greater than 45 degrees of the ASTM guidelines, and the mascara and eye shadow showed over 40 degrees. This was because these contained ferromagnetic pigments such as an iron oxide, but those translational forces were very small owing to slight mass. However, it is desirable that these should be removed before MRI examination to prevent secondary problems. (author)

  4. Official Program and Abstracts of the 15. Meeting of the Latin-American Association of Biology and Nuclear Medicine Societies (ALASBIMN 97); Iberoamerican Congress of Nuclear Medicine

    International Nuclear Information System (INIS)

    1997-01-01

    This issue contains 117 abstracts of lectures and poster sessions of the 15th Meeting of the Latin-American Association of Biology and Nuclear Medicine Societies (ALASBIMN 97) and Iberoamerican Congress of Nuclear Medicine, held in Lima, Peru, from 26 to 30 October 1997. The key subjects addressed are nuclear medicine and diagnostic techniques on brain, liver, lungs, heart, osteo-articular, cardiology, oncology, endocrinology, radiopharmaceuticals, medical physics, SPECT and their applications in diagnostic medicine. (APC)

  5. Cancer statistics for African Americans, 2013.

    Science.gov (United States)

    DeSantis, Carol; Naishadham, Deepa; Jemal, Ahmedin

    2013-05-01

    In this article, the American Cancer Society estimates the number of new cancer cases and deaths for African Americans and compiles the most recent data on cancer incidence, mortality, survival, and screening prevalence based upon incidence data from the National Cancer Institute, the Centers for Disease Control and Prevention, and the North American Association of Central Cancer Registries and mortality data from the National Center for Health Statistics. It is estimated that 176,620 new cases of cancer and 64,880 deaths will occur among African Americans in 2013. From 2000 to 2009, the overall cancer death rate among males declined faster among African Americans than whites (2.4% vs 1.7% per year), but among females, the rate of decline was similar (1.5% vs 1.4% per year, respectively). The decrease in cancer death rates among African American males was the largest of any racial or ethnic group. The reduction in overall cancer death rates since 1990 in men and 1991 in women translates to the avoidance of nearly 200,000 deaths from cancer among African Americans. Five-year relative survival is lower for African Americans than whites for most cancers at each stage of diagnosis. The extent to which these disparities reflect unequal access to health care versus other factors remains an active area of research. Overall, progress in reducing cancer death rates has been made, although more can and should be done to accelerate this progress through ensuring equitable access to cancer prevention, early detection, and state-of-the-art treatments. Copyright © 2013 American Cancer Society, Inc.

  6. American Indian Education Opportunities Program. Supplement 9

    Science.gov (United States)

    Molin, Paulette F.

    1997-01-01

    Activities of the American Indian Educational Opportunities Program (AIEOP) at Hampton University for this reporting period included the establishment of a student chapter of the American Indian Science & Engineering Society (AISES), a move to new office space, hosting events on campus for visiting students from the American Indian Education Program of Oxon Hill, Maryland and Onondaga Community College in Syracuse, New York, collaboration with the Multicultural Leadership Team at NASA Langley Research Center for a Native American elder to serve as a speaker, participation in Native American conferences and other events, and continuing efforts to recruit and retain American Indian students.

  7. Hardness optimization of boride diffusion layer on Astm F-75 alloy using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Arguelles O, J. L.; Corona R, M. A. [Universidad Autonoma de San Luis Potosi, Doctorado Institucional en Ingenieria y Ciencia de Materiales, San Luis Potosi 78000, SLP (Mexico); Marquez H, A.; Saldana R, A. L.; Saldana R, A. [Universidad de Guanajuato, Ingenieria Mecanica Agricola DICIVA, Irapuato, Guanajuato 36500 (Mexico); Moreno P, J., E-mail: amarquez@ugto.mx [Universidad de Guanajuato, Departamento de Minas, Metalurgia y Geologia, Ex-Hacienda San Matias s/n, Guanajuato, Guanajuato 36020 (Mexico)

    2017-11-01

    In this study, the Response Surface Methodology (Rsm) and Central Composite Design (Ccd) were used to optimize the hardness of boride diffusion layer on Astm F-75 alloy (also called Haynes alloy). A boronizing thermochemical treatment was carried out at different temperatures and for different time periods. Hardness tests were conducted. The boride diffusion layer was verified by the X-ray diffraction (XRD) analysis indicating the formation of Co B, Co{sub 2}B, Cr B and Mo{sub 2}B phases. An optimal hardness of 3139.7 Hv was obtained for the samples subjected to the boriding process for a duration of 6.86 h at 802.4 degrees Celsius. (Author)

  8. Readings on American Society. The Audio-Lingual Literary Series II.

    Science.gov (United States)

    Imamura, Shigeo; Ney, James W.

    This text contains 11 lessons based on an adaptation of the 1964 essay "Automation: Road to Lifetime Jobs" by A.H. Raskin and 14 lessons based on an adaptation of John Fischer's 1948 essay "Unwritten Rules of American Politics." The format of the book and the lessons is the same as that of the other volumes of "The Audio-Lingual Literary Series."…

  9. Standard practice for application of thermoluminescence-dosimetry (TLD) systems for determining absorbed dose in radiation-hardness testing of electronic devices. ASTM standard

    International Nuclear Information System (INIS)

    1998-05-01

    This practice is under the jurisdiction of ASTM Committee E-10 on Nuclear Technology and Applications and is the direct responsibility of Subcommittee E10.07 on Radiation Dosimetry for Radiation Effects on Materials and Devices. Current edition approved Jun. 10, 1997. Published May 1998. Originally published as E 668-78. Last previous edition E 668-93

  10. American Society for Radiation Oncology (ASTRO) 2012 Workforce Study: The Radiation Oncologists' and Residents' Perspectives

    International Nuclear Information System (INIS)

    Pohar, Surjeet; Fung, Claire Y.; Hopkins, Shane; Miller, Robert; Azawi, Samar; Arnone, Anna; Patton, Caroline; Olsen, Christine

    2013-01-01

    Purpose: The American Society for Radiation Oncology (ASTRO) conducted the 2012 Radiation Oncology Workforce Survey to obtain an up-to-date picture of the workforce, assess its needs and concerns, and identify quality and safety improvement opportunities. The results pertaining to radiation oncologists (ROs) and residents (RORs) are presented here. Methods: The ASTRO Workforce Subcommittee, in collaboration with allied radiation oncology professional societies, conducted a survey study in early 2012. An online survey questionnaire was sent to all segments of the radiation oncology workforce. Respondents who were actively working were included in the analysis. This manuscript describes the data for ROs and RORs. Results: A total of 3618 ROs and 568 RORs were surveyed. The response rate for both groups was 29%, with 1047 RO and 165 ROR responses. Among ROs, the 2 most common racial groups were white (80%) and Asian (15%), and the male-to-female ratio was 2.85 (74% male). The median age of ROs was 51. ROs averaged 253.4 new patient consults in a year and 22.9 on-treatment patients. More than 86% of ROs reported being satisfied or very satisfied overall with their career. Close to half of ROs reported having burnout feelings. There was a trend toward more frequent burnout feelings with increasing numbers of new patient consults. ROs' top concerns were related to documentation, reimbursement, and patients' health insurance coverage. Ninety-five percent of ROs felt confident when implementing new technology. Fifty-one percent of ROs thought that the supply of ROs was balanced with demand, and 33% perceived an oversupply. Conclusions: This study provides a current snapshot of the 2012 radiation oncology physician workforce. There was a predominance of whites and men. Job satisfaction level was high. However a substantial fraction of ROs reported burnout feelings. Perceptions about supply and demand balance were mixed. ROs top concerns reflect areas of attention for the

  11. Attitudes Regarding Labial Hypertrophy and Labiaplasty: A Survey of Members of the Society of Gynecologic Surgeons and the North American Society for Pediatric and Adolescent Gynecology.

    Science.gov (United States)

    Westermann, Lauren B; Oakley, Susan H; Mazloomdoost, Donna; Crisp, Catrina C; Kleeman, Steven D; Benbouajili, Janine M; Pauls, Rachel N

    2016-01-01

    The aim of this study was to describe gynecologists' attitudes toward labial hypertrophy and explore possible differences among providers for pediatric/adolescent patients. This was an institutional review board-approved, cross-sectional survey of physician attendees at 2 national meetings in 2014: the Society of Gynecologic Surgeons (SGS) and the North American Society for Pediatric and Adolescent Gynecology (NASPAG). The survey was designed to query demographics and impressions regarding labial hypertrophy and labiaplasty. Three hundred sixty-five surveys were completed (response rate, 50%); 268 were analyzed: 55% from SGS and 45% from NASPAG. Most were older than 41 years; 170 (63%) were women, and 93 (35%) were men. More men than women attended SGS (60%); however, women were the majority at NASPAG (94%).Most respondents believed labial hypertrophy to be infrequently reported and "a condition that impacts body image." Common symptoms were "discomfort with exercise" and "dissatisfaction with appearance naked." The majority felt this to impact sexual function "in some cases," citing "self-esteem" and "comfort" most often.Concerning therapies for provided labial hypertrophy, 83% of practitioners provide reassurance, whereas 77% would offer labiaplasty. Expertise with labiaplasty varied; 28% felt "very comfortable," and 11% felt "very uncomfortable."Provider preference for treatment differed based on meeting attendance. After logistic regression controlling for sex and age, attendance at SGS remained associated with offering labiaplasty (P = 0.001; odds ratio, 4.1; 95% confidence interval, 1.8-9.3), whereas NASPAG attendance was associated with providing reassurance (P = 0.008; odds ratio, 0.30; 95% confidence interval, 0.10-0.70). Although the majority surveyed view labial hypertrophy to be bothersome, gynecologists caring for our youngest patients are more likely to provide reassurance. Consensus guidelines are needed to aid practitioners in appropriate management

  12. 75 FR 64611 - Italian American Heritage and Culture Month, 2010

    Science.gov (United States)

    2010-10-19

    .... As we honor the long history and vast contributions of Italian Americans, let us recommit to... society and steer the course of our history. During Italian American Heritage and Culture Month, we... Culture Month. I call upon all Americans to learn more about the history of Italian Americans, and to...

  13. Joint Consensus Statement of the American Academy of Sleep Medicine and Sleep Research Society on the Recommended Amount of Sleep for a Healthy Adult: Methodology and Discussion

    OpenAIRE

    Watson, Nathaniel F.; Badr, M. Safwan; Belenky, Gregory; Bliwise, Donald L.; Buxton, Orfeu M.; Buysse, Daniel; Dinges, David F.; Gangwisch, James; Grandner, Michael A.; Kushida, Clete; Malhotra, Raman K.; Martin, Jennifer L.; Patel, Sanjay R.; Quan, Stuart F.; Tasali, Esra

    2015-01-01

    The American Academy of Sleep Medicine and Sleep Research Society recently released a Consensus Statement regarding the recommended amount of sleep to promote optimal health in adults. This paper describes the methodology, background literature, voting process, and voting results for the consensus statement. In addition, we address important assumptions and challenges encountered during the consensus process. Finally, we outline future directions that will advance our understanding of sleep n...

  14. Highlights of the American Nuclear Society topical meeting on the treatment and handling of radioactive wastes

    International Nuclear Information System (INIS)

    Blasewitz, A.G.; Lerch, R.E.; Richardson, G.L.

    1983-01-01

    The American Nuclear Society Topical Meeting on the Treatment and Handling of Radioactive Wastes was held in Richland, Washington, from 19-22 April 1982. The object of the meeting was to provide a thorough assessment of the status of technology. The response to the meeting was excellent: 123 papers were presented. There were 505 registrations; 83 were from outside the USA, representing 13 countries. The large and diverse attendance provided a broad technological view and perspective. The following major points emerged from the conference: (1) In an extensive world-wide effort, techniques are being developed to cover all phases of radioactive waste management. (2) A broad and deep technological base has been developed. (3) Many adequate processes are ready for actual application while others are ready for demonstration of applicability. These demonstrations are important to further public acceptance of nuclear energy. (4) At the present level of maturity, systematic analyses should be performed to determine actual requirements for the treatment and handling of radioactive wastes. These analyses can be used to focus our research and development, and demonstration activities to achieve treatment and conditioning systems which are both appropriate and cost-effective. (author)

  15. Results of crack-arrest tests on irradiated a 508 class 3 steel

    International Nuclear Information System (INIS)

    Iskander, S.K.; Milella, P.P.; Pini, M.A.

    1998-02-01

    Ten crack-arrest toughness values for irradiated specimens of A 508 class 3 forging steel have been obtained. The tests were performed according to the American Society for Testing and Materials (ASTM) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K la of Ferritic Steels, E 1221-88. None of these values are strictly valid in all five ASTM E 1221-88 validity criteria. However, they are useful when compared to unirradiated crack-arrest specimen toughness values since they show the small (averaging approximately 10 degrees C) shifts in the mean and lower-bound crack-arrest toughness curves. This confirms that a low copper content in ASTM A 508 class 3 forging material can be expected to result in small shifts of the transition toughness curve. The shifts due to neutron irradiation of the lower bound and mean toughness curves are approximately the same as the Charpy V-notch (CVN) 41-J temperature shift. The nine crack-arrest specimens were irradiated at temperatures varying from 243 to 280 degrees C, and to a fluence varying from 1.7 to 2.7 x 10 19 neutrons/cm 2 (> 1 MeV). The test results were normalized to reference values that correspond to those of CVN specimens irradiated at 284 degrees C to a fluence of 3.2 x 10 19 neutrons/cm 2 (> 1 MeV) in the same capsule as the crack-arrest specimens. This adjustment resulted in a shift to lower temperatures of all the data, and in particular moved two data points that appeared to lie close to or lower than the American Society of Mechanical Engineers K la curve to positions that seemed more reasonable with respect to the remaining data. A special fixture was designed, fabricated, and successfully used in the testing. For reasons explained in the text, special blocks to receive the Oak Ridge National Laboratory clip gage were designed, and greater-than-standard crack-mouth opening displacements measured were accounted for. 24 refs., 13 figs., 12 tabs

  16. Review of in-service thermal annealing of nuclear reactor pressure vessels

    International Nuclear Information System (INIS)

    Server, W.L.

    1984-01-01

    Radiation embrittlement of ferritic pressure vessel steels increases the ductile-brittle transition temperature and decreases the upper-shelf level of toughness as measured by Charpy impact tests. A thermal anneal cycle well above the normal operating temperature of the vessel can restore most of the original Charpy V-notch energy properties. A test reactor pressure vessel has been wet annealed at less than 343 0 C (650 0 F), and annealing of the Belgian BR-3 reactor vessel has recently taken place. An industry survey indicates that dry annealing a reactor vessel in-place is feasible, but solvable engineering problems do exist. The materials with highest radiation sensitivity in the older reactor vessels are submerged-arc weld metals with high copper and nickel concentrations. The limited Charpy V-notch and fracture toughness data available for five such welds were reviewed. The review suggested that significant recovery results from annealing at 454 0 C (850 0 F) for one week. Two of the main concerns with a localized heat treatment at 454 0 C (850 0 F) are the degree of distortion that may occur after the annealing cycle and the extent of residual stresses. A thermal and structural analysis of a reactor vessel for distortions and residual stresses found no problems with the reactor vessel itself but did indicate a rotation at the nozzle region of the vessel that would plastically deform the attached primary piping. Further analytical studies are needed. An American Society for Testing and Materials (ASTM) task group is upgrading and revising the ASTM Recommended Guide for In-Service Annealing of WaterCooled Nuclear Reactor Vessels (E 509-74) with emphasis on the materials and surveillance aspects of annealing rather than system engineering problems. System safety issues are the province of organizations other than ASTM (for example, the American Society of Mechanical Engineers Boiler and Pressure Vessel Code body)

  17. FUELS IN SOIL TEST KIT: FIELD USE OF DIESEL DOG SOIL TEST KITS

    Energy Technology Data Exchange (ETDEWEB)

    Susan S. Sorini; John F. Schabron; Joseph F. Rovani, Jr.

    2002-09-30

    Western Research Institute (WRI) has developed a new commercial product ready for technology transfer, the Diesel Dog{reg_sign} Portable Soil Test Kit, for performing analysis of fuel-contaminated soils in the field. The technology consists of a method developed by WRI (U.S. Patents 5,561,065 and 5,976,883) and hardware developed by WRI that allows the method to be performed in the field (patent pending). The method is very simple and does not require the use of highly toxic reagents. The aromatic components in a soil extract are measured by absorption at 254 nm with a field-portable photometer. WRI added significant value to the technology by taking the method through the American Society for Testing and Materials (ASTM) approval and validation processes. The method is designated as ASTM Method D 5831-96, Standard Test Method for Screening Fuels in Soils. This ASTM designation allows the method to be used for federal compliance activities. In June 2001, the Diesel Dog technology won an American Chemical Society Regional Industrial Innovations Award. To gain field experience with the new technology, Diesel Dog kits have been used for a variety of site evaluation and cleanup activities. Information gained from these activities has led to improvements in hardware configurations and additional insight into correlating Diesel Dog results with results from laboratory methods. The Wyoming Department of Environmental Quality (DEQ) used Diesel Dog Soil Test Kits to guide cleanups at a variety of sites throughout the state. ENSR, of Acton, Massachusetts, used a Diesel Dog Portable Soil Test Kit to evaluate sites in the Virgin Islands and Georgia. ChemTrack and the U.S. Army Corps of Engineers successfully used a test kit to guide excavation at an abandoned FAA fuel-contaminated site near Fairbanks, Alaska. Barenco, Inc. is using a Diesel Dog Portable Soil Test Kit for site evaluations in Canada. A small spill of diesel fuel was cleaned up in Laramie, Wyoming using a Diesel

  18. National Aeronautics and Space Administration (NASA)/American Society of Engineering Education (ASEE) Summer Faculty Fellowship Program - 2000

    Science.gov (United States)

    Bannerot, Richard B. (Editor); Sickorez, Donn G. (Editor)

    2003-01-01

    The 2000 Johnson Space Center (JSC) National Aeronautics and Space Administration (NASA)/American Society for Engineering Education (ASEE) Summer Faculty Fellowship Program was conducted by the University of Houston and JSC. The 10-week program was operated under the auspices of the ASEE. The program at JSC, as well as the programs at other NASA Centers, was funded by the Office of University Affairs, NASA Headquarters, Washington, D.C. The objectives of the program, which began in 1965 at JSC and 1964 nationally, are to (1) further the professional knowledge of qualified engineering and science faculty, (2) stimulate an exchange of ideas between participants and NASA, (3) enrich and refresh the research and teaching activities of participants' institutions, and (4) contribute to the research objectives of the NASA Centers. Each faculty fellow spent at least 10 weeks at JSC engaged in a research project commensurate with her/his interests and background, and worked in collabroation with a NASA/JSC colleague. This document is a compilation of the final reports on the research projects done by the faculty fellows during the summer of 2000.

  19. Atypical subtrochanteric and diaphyseal femoral fractures: report of a task force of the American Society for Bone and Mineral Research

    DEFF Research Database (Denmark)

    Shane, Elizabeth; Burr, David; Ebeling, Peter R

    2010-01-01

    Reports linking long-term use of bisphosphonates (BPs) with atypical fractures of the femur led the leadership of the American Society for Bone and Mineral Research (ASBMR) to appoint a task force to address key questions related to this problem. A multidisciplinary expert group reviewed pertinent...... to designate a femoral fracture as atypical. Minor features include their association with cortical thickening, a periosteal reaction of the lateral cortex, prodromal pain, bilaterality, delayed healing, comorbid conditions, and concomitant drug exposures, including BPs, other antiresorptive agents...... published reports concerning atypical femur fractures, as well as preclinical studies that could provide insight into their pathogenesis. A case definition was developed so that subsequent studies report on the same condition. The task force defined major and minor features of complete and incomplete...

  20. Management of Thyroid Peroxidase Antibody Euthyroid Women in Pregnancy: Comparison of the American Thyroid Association and the Endocrine Society Guidelines

    Directory of Open Access Journals (Sweden)

    L. Mehran

    2013-01-01

    Full Text Available The presence of thyroid autoantibodies is relatively high in women of childbearing age. There is evidence that positive thyroperoxidase antibody even in euthyroid women may increase the risk of spontaneous and recurrent pregnancy loss and preterm delivery. However, the evidence is not enough to justify recommendation on the screening of pregnant women for thyroid autoantibodies or LT4 supplementation for reducing maternal or fetal complications. In this paper we reviewed the related evidence and compared the new guidelines of the American Thyroid Association and Endocrine Society with respect to the screening and management of positive thyroperoxidase antibody in euthyroid pregnant women. As there was no major contradiction or disagreement between the two guidelines, either one of two guidelines may be used by clinicians for the appropriate management of thyroid autoimmunity during pregnancy.