NxRepair: error correction in de novo sequence assembly using Nextera mate pairs

Directory of Open Access Journals (Sweden)

Rebecca R. Murphy

2015-06-01

Full Text Available Scaffolding errors and incorrect repeat disambiguation during de novo assembly can result in large scale misassemblies in draft genomes. Nextera mate pair sequencing data provide additional information to resolve assembly ambiguities during scaffolding. Here, we introduce NxRepair, an open source toolkit for error correction in de novo assemblies that uses Nextera mate pair libraries to identify and correct large-scale errors. We show that NxRepair can identify and correct large scaffolding errors, without use of a reference sequence, resulting in quantitative improvements in the assembly quality. NxRepair can be downloaded from GitHub or PyPI, the Python Package Index; a tutorial and user documentation are also available.

High-Performance Epoxy-Resin-Bonded Magnets Produced from the Sm2Fe17Nx Powders Coated by Copper and Zinc Metals

Science.gov (United States)

Noguchi, Kenji; Machida, Ken-ichi; Adachi, Gin-ya

2001-04-01

Fine powders of Sm2Fe17Nx coated with copper metal reduced from CuCl2 and/or zinc metal subsequently derived by photo-decomposition of diethylzinc [Zn(C2H5)2] were prepared, and their magnetic properties were characterized in addition to those of epoxy-resin-bonded magnets produced from the coated powders (Cu/Sm2Fe17Nx, Zn/Sm2Fe17Nx and Zn/Cu/Sm2Fe17Nx). The remanence (Br) and maximum energy product [(\\mathit{BH})max] of double metal-coated Zn/Cu/Sm2Fe17Nx powders were maintained at higher levels than those of single Zn metal-coated Sm2Fe17Nx ones (Zn/Sm2Fe17Nx) even after heat treatment at 673 K since the oxidation resistance and thermal stability were effectively improved by formation of the thick and uniform protection layer on the surface of Sm2Fe17Nx particles. Moreover, the epoxy-resin-bonded magnets produced from the Zn/Cu/Sm2Fe17Nx powders possessed good corrosion resistance in air at 393 K which it resulted in the smaller thermal irreversible flux loss than that of uncoated and single Zn metal-coated Sm2Fe17Nx powders in the temperature range of above 393 K.

Rear-Sided Passivation by SiNx:H Dielectric Layer for Improved Si/PEDOT:PSS Hybrid Heterojunction Solar Cells.

Science.gov (United States)

Sun, Yiling; Gao, Pingqi; He, Jian; Zhou, Suqiong; Ying, Zhiqin; Yang, Xi; Xiang, Yong; Ye, Jichun

2016-12-01

Silicon/organic hybrid solar cells have recently attracted great attention because they combine the advantages of silicon (Si) and the organic cells. In this study, we added a patterned passivation layer of silicon nitride (SiNx:H) onto the rear surface of the Si substrate in a Si/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PSS) hybrid solar cell, enabling an improvement of 0.6 % in the power conversion efficiency (PCE). The addition of the SiNx:H layer boosted the open circuit voltage (V oc) from 0.523 to 0.557 V, suggesting the well-passivation property of the patterned SiNx:H thin layer that was created by plasma-enhanced chemical vapor deposition and lithography processes. The passivation properties that stemmed from front PSS, rear-SiNx:H, front PSS/rear-SiNx:H, etc. are thoroughly investigated, in consideration of the process-related variations.

The effect of CO2 on the plasma remediation of NxOy

Science.gov (United States)

Gentile, Ann C.; Kushner, Mark J.

1996-04-01

Plasma remediation is being investigated for the removal of oxides of nitrogen (NxOy) from atmospheric pressure gas streams. In previous works we have investigated the plasma remediation of NxOy from N2/O2/H2O mixtures using repetitively pulsed dielectric barrier discharges. As combustion effluents contain large percentages of CO2, in this paper we discuss the consequences of CO2 in the gas mixture on the efficiency of remediation and on the end products. We find that there is a small increase in the efficiency of total NxOy remediation (molecules/eV) with increasing CO2 fraction, however the efficiency of NO remediation alone generally decreases with increasing CO2. This differential is more pronounced at low energy deposition per pulse. More remediation occurs through the reduction channel with increasing CO2 while less NO2 and HNOx are produced through the oxidation channel. CO is produced by electron impact of CO2 though negligible amounts of cyanides are generated.

4Nx Non-Isolated and Non-Inverting Hybrid Interleaved Multilevel Boost Converter Based on VLCIm Cell and Cockroft Walton Voltage Multiplier for Renewable Energy Applications

DEFF Research Database (Denmark)

Bhaskar, Mahajan Sagar; Padmanaban, Sanjeevikumar; Blaabjerg, Frede

2016-01-01

In this treatise, 4Nx hybrid Non Inverting & Non Isolated (NI-NI) DC-DC interleaved multi-level boost converter (4Nx IMBC) for renewable energy applications is proposed. The proposed 4Nx IMBC is derived by coalescing the feature of 2Nx DC-DC Interleaved Multi-level Boost Converter (2Nx IMBC), vol...... or transformers. Simulations results of proposed circuitry are presented which verify the analysis, function, working modes & feasibility of proposed circuitry converter.......In this treatise, 4Nx hybrid Non Inverting & Non Isolated (NI-NI) DC-DC interleaved multi-level boost converter (4Nx IMBC) for renewable energy applications is proposed. The proposed 4Nx IMBC is derived by coalescing the feature of 2Nx DC-DC Interleaved Multi-level Boost Converter (2Nx IMBC...... applicable at user end its DC voltage magnitude needs to be incremented with high conversion. Existing and recently proposed DC-DC converter are not sufficiently expert to employ practically, because of stability issues, high duty cycle and high ripple in the output. To overcome the conversion ratio problem...

Strong composition-dependent disorder in InAs1-xNx alloys

International Nuclear Information System (INIS)

Benaissa, H.; Zaoui, A.; Ferhat, M.

2009-01-01

We investigate the main causes of disorder in the InAs 1-x N x alloys (x = 0, 0.03125, 0.0625, 0.09375, 0.125, 0.25, 0.5, 0.75, 0.875, 0.90625, 0.9375, 0.96875 and 1). The calculation is based on the density-functional theory in the local-density approximation. We use a plane wave-expansion non-norm conserving ab initio Vanderbilt pseudopotentials. To avoid the difficulty of considering the huge number of atomic configurations, we use an appropriate strategy in which we consider four configurations for a given composition where the N atoms are not randomly distributed. We mainly show that the band gap decreases (increases) rapidly with increasing (decreasing) compositions of N. As a consequence the optical band gap bowing is found to be strong and composition dependent. The obtained compounds, from these alloys, may change from semi-conducting to metal (passing to a negative bowing) and could be useful for device applications, especially at certain composition.

Development of a technology for the preparation of 188W-188Re generators

International Nuclear Information System (INIS)

Oliveira, Alexandre de

2004-01-01

A big interest has recently arisen concerning the use of Rhenium-188 (188Re) for various medical applications. Tumor therapy with antibodies labeled with 188Re is the main application, but it is being studied its application in carcinomas of medullar thyroid, bone pain palliation and radionuclide synovectomy, among others. Rhenium-188 decays 79% to the ground state of stable 188Os (Eβ1max - 2,11 MeV) and 20% to the first excited state (Eβ2max = 1,97 MeV). The deexcitation of this state gives a 155 keV gamma ray (15r%) which can be detected by imaging. Another great advantage is the viability of carrier-free 188Re from the decay of 188W (t 1/2 = 69.4 days) in a generator system. The objective of this work is the development of the technology for the preparation of 188W- 188Re generators. To accomplish this, the steps of the work are: preparation of the targets of W; irradiation of W targets in order to measure the activation and radionuclidic impurities; development of 188W-188Re generators; development of a method for the quality control of 188Re: chemical, radiochemical and radionuclidic purities. The study of alumina-based generators was performed with the irradiation of targets of natural metallic W and W03 and showed that this kind of generator will only be viable with the importation of 188W, due to the low neutron flux of the Reactor IEA-R1 Reactor for the commercial routine production of this radioisotope, but the technology of production and quality control were successful. The gel type chromatographic generators of WZr were produced with natural WO3 targets and showed that, if enriched targets are to be used and with the power upgrade of the IEA-R1 Reactor, they can be produced by the Radiopharmacy Center at IPEN-SP. The quality control methodology were determined and the results were inside the limits given by the Pharmacopoeia. (author)

A review on the current status and production technology for 188W-188Re generator system

International Nuclear Information System (INIS)

Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M.

1998-11-01

The current status of 188 W- 188 Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of 188 W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced 188 W- 188 Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of 188 W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of 186 W enriched sample, 188 W- 188 Re generator production experiments were performed to evaluate the possibility of 188 W- 188 Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical 188 W- 188 Re generator production using of low-specific activity 188 W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs

Issues associated with the use of the Tungsten-188/Rhenium188 generator and concentrator system and preparation of Re-188 HDD: A report

International Nuclear Information System (INIS)

Knapp, F.F.Jr.; Turner, J.H.; Jeong, J.-M.; Padhy, A.K.

2004-01-01

The ready availability of no-carrier-added Rhenium-188 from the Tungsten-188/Rhenium-188 generator represents an important source of a therapeutic radioisotope for a broad range of therapeutic applications in nuclear medicine, oncology, rheumatology and interventional cardiology. The International Atomic Energy Agency (IAEA) is coordinating a clinical trial involving the use of Rhenium188-Lipiodol for therapy of hepatocellular carcinoma. This report summarizes the experience of investigators at ten participating centres associated with the use and performance of the Tungsten-188/Rhenium-188 generators and the preparation and handling of the Re-188 HDD agent. This evaluation has demonstrated the cost effective provision of on-site therapeutic activities of Rhenium-188 and recommendations are made for further development of the next generator prototype in light of this international experience. The high bolus volumes (20-40 ml) of the ORNL generator requires post elution concentration of the Re-188 bolus by passage through the tandem silver cation/anion column system. The high back pressure often encountered during generator elution through the silver cation/anion concentrator system has been identified as a potential problem. The details of a method involving in house preparation of the silver cation columns were provided and implementation of this method for Re-188 bolus concentration is recommended. It is also recommended that ORNL investigators reassess the possibility of increasing Tungsten generator loading capacity and the use of higher specific activity Tungsten-188, with a view to reducing the generator bolus volume. The Re-188 HDD/Lipiodol conjugate?;ate is used in this IAEA trial for radioembolytic therapy of primary liver cancer, and methods for preparation of Re-188 HDD and its extraction into Lipiodol are discussed. Since Re-188 HDD binds to glass surfaces, the recovery yields are variable and can be as low as 40-45%. In an effort to maximize the

Effect of oxygen on tuning the TiNx metal gate work function on LaLuO3

International Nuclear Information System (INIS)

Mitrovic, I.Z.; Przewlocki, H.M.; Piskorski, K.; Simutis, G.; Dhanak, V.R.; Sedghi, N.; Hall, S.

2012-01-01

This paper presents experimental evidence on effective work function tuning due to the presence of oxygen at the TiNx/LaLuO 3 interface. Two complementary techniques, internal photoemission and X-ray photoelectron spectroscopy, show good agreement on the position of the metal gate Fermi level to conduction (2.79 ± 0.25 eV) and valence (2.65 ± 0.08 eV) band edge for TiNx/bulk LaLuO 3 gate stacks. The chemical shifts of Ti2p and N1s core levels and different degree in ionicity of TiNx metal gates correlate with the observed valence band offset shifts. The results have significance for setting the band edge work function and resulting low threshold voltage for ultimately scaled LaLuO 3 -based p-metal oxide semiconductor field effect transistor devices. - Highlights: ► The conduction band offset measured by internal photoemission. ► The valence band offset (VBO) measured by X-ray photoelectron spectroscopy. ► Different degree in ionicity of TiNx correlates with the VBO shifts. ► The effective work function of the gate stacks varies from 4.6 to 5.2 eV. ► Oxygen at the TiNx/LaLuO 3 interface increases effective work function.

Hydroxyapatite based 99Mo-99mTc and 188W-188Re generator systems

International Nuclear Information System (INIS)

Monroy-Guzman, F.; Badillo-Almaraz, V.E.; Flores de la Torre, J.A.; Cosgrove, J.; Knapp, F.F. Jr.

2007-01-01

This paper describes studies evaluating the use of hydroxyapatite as the adsorbent material for both 90M o- 90m Tc and 89W - 188 Re generator systems. Hydroxyapatite is an insoluble solid with anion exchange properties. A study of the sorption behaviour of 90M o, 90m Tc, 188 W and 188 Re on hydroxyapatite in NaCl medium was evaluated by batch experiments. The results demonstrated that while 90M o, 90m Tc and 188 Re are not adsorbed by the hydroxyapatite in NaCl solutions (Kd 89W is strongly adsorbed (Kd >500). On the basis of these measurements, hydroxyapatite 89W - 188 Re generator systems were then constructed and eluted in NaCl solutions. The hydroxyapatite based 89W - 188 Re generator performances are presented. (author)

Production of {sup 186}Re and {sup 188}Re, and synthesis of {sup 188}Re-DTPA

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, Kazuyuki; Motoishi, Shoji; Kobayashi, Katsutoshi; Izumo, Mishiroku [Department of Radioisotopes, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Musdja, Muhammad Yanis

1999-08-01

Production of radioactive rhenium isotopes {sup 186}Re and {sup 188}Re, and synthesis of {sup 188}Re-DTPA have been studied. For {sup 186}Re, a production method by the {sup 185}Re(n, {gamma}) {sup 186}Re reaction in a reactor has been established. For {sup 188}Re, a production method by the double neuron capture reaction of {sup 186}W, which produces a {sup 188}W/{sup 188}Re generator, has been established. For synthesis of {sup 188}Re-DTPA, the optimum conditions, including pH, the amounts of regents and so on, have been determined. (author)

A review on the current status and production technology for {sup 188}W-{sup 188}Re generator system

Energy Technology Data Exchange (ETDEWEB)

Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M

1998-11-01

The current status of {sup 188}W-{sup 188}Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of {sup 188}W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced {sup 188}W-{sup 188}Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of {sup 188}W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of {sup 186}W enriched sample, {sup 188}W-{sup 188}Re generator production experiments were performed to evaluate the possibility of {sup 188}W-{sup 188}Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical {sup 188}W-{sup 188}Re generator production using of low-specific activity {sup 188}W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs.

Development of a high performance {sup 188}W/{sup 188}Re generator by using a synthetic alumina

Energy Technology Data Exchange (ETDEWEB)

Lee, Jun Sig [Korea Atomic Energy Research Institute, 1045 Daeduk-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)], E-mail: jlee15@kaeri.re.kr; Lee, Jong-Soup; Park, Ul-Jae; Son, Kwang-Jae; Han, Hyon-Soo [Korea Atomic Energy Research Institute, 1045 Daeduk-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of)

2009-07-15

A synthetic alumina functionalized with a sulfate moiety has been developed as the column material of {sup 99}Mo/{sup 99m}Tc and {sup 188}W/{sup 188}Re generators. This material is synthesized by a sol-gel processing. In order to characterize the adsorbent for the {sup 188}W/{sup 188}Re separation, both batch and column contact experiments were conducted. As a result of the experiments, it is found that the maximum capacity of the adsorbent for tungsten is higher than 450 mg/g. Hence it is possible to produce {approx}3 Ci {sup 188}W/{sup 188}Re generator with only 1 g of the adsorbent from {sup 188}W solutions supplied from ORNL, USA or RIAR, Russia. A demonstration study was conducted to show the performance of an {sup 188}W/{sup 188}Re generator column. In this study, 1 Ci of {sup 188}W purchased from RIAR, Russia, is loaded on a 0.9 cm ID column packed with 0.7 g of the adsorbent. Elution of {sup 188}Re is performed every 4-7 days by using the saline solution for more than three months. Nearly 100% of tungsten is loaded by passing 5 ml of the {sup 188}W solution (pH=8) through the dry packed column at a 1 ml/min flow rate. Elution efficiency of {sup 188}Re is 70-90% by using 5 ml of the saline solution. The ratio of {sup 188}W/{sup 188}Re in the eluted solution is 0.002-0.003%. When a Sep-Pak containing 0.26 g of acid alumina is installed as a tandem column, the ratio is decreased to less than 10{sup -3}%. Thin layer chromatography for the eluted {sup 188}Re solution shows 100% radiochemical purity. Also, alumina content in the eluted solution shows less than 10 ppm. Through this study, the performance of this adsorbent was successfully demonstrated. By using the developed adsorbent, minimization of the generator column and consequently the volume of eluant could be possible while maintaining the quality of {sup 188}Re just as much as that available in the market.

Permanent magnetic properties of NdFe12Nx sputtered films epitaxially grown on V buffer layer

Science.gov (United States)

Sato, T.; Ohsuna, T.; Yano, M.; Kato, A.; Kaneko, Y.

2017-08-01

To clarify the magnetic properties of the NdFe12Nx compound, which shows promise as a high-performance permanent magnet material, NdFe12Nx epitaxial films fabricated by using a V underlayer on MgO (100) single-crystalline substrates were investigated. Nd-Fe films deposited on a V underlayer consist of NdFe12 grains, which have a c-axis orientation perpendicular to the film plane, as well as α-Fe and Nd2Fe17 phases. In the Nd-Fe-N film obtained by subsequent nitridation of the Nd-Fe film, NdFe12Nx grains grew as the dominant phase, and the volume fractions of α-Fe phases dropped below 5%. A Nd-Fe-N film with a thickness of 50 nm exhibits a saturation magnetization (Ms) of 1.7 T, an anisotropy field (HA) of ˜60 kOe, a magnetocrystalline anisotropy energy (K1) of ˜4.1 MJ/m3, and a coercivity (Hc) of 1.7 kOe. The Hc of a Nd-Fe-N film with a thickness of 25 nm is 4.3 kOe. These results indicate that NdFe12Nx compounds have a superior Ms compared to Nd-Fe-B magnets, while the enhancement in Hc is indispensable.

12 CFR 18.8 - Delivery.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Delivery. 18.8 Section 18.8 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY DISCLOSURE OF FINANCIAL AND OTHER INFORMATION BY NATIONAL BANKS § 18.8 Delivery. Each national bank shall, after receiving a request for an annual...

Effects of Alloyed Carbon on the General Corrosion and the Pitting Corrosion Behavior of FeCrMnN Stainless Steels

Energy Technology Data Exchange (ETDEWEB)

Ha, Heon-Young; Lee, Tae-Ho; Kim, Sung-Joon [Korea Institute of Materials Science, Changwon (Korea, Republic of)

2011-10-15

The effects of alloyed carbon on the pitting corrosion, the general corrosion, and the passivity behavior of Fe{sub 1}8Cr{sub 1}0Mn{sub 0}.4Nx{sub C} (x=0 ⁓ 0.38 wt%) alloys were investigated by various electrochemical methods and XPS analysis. The alloyed carbon increased the general corrosion resistance of the FeCrMnN matrix. Carbon enhanced the corrosion potential, reduced the metal dissolution rate, and accelerated the hydrogen evolution reaction rate in various acidic solutions. In addition, carbon promoted the pitting corrosion resistance of the matrix in a chloride solution. The alloyed carbon in the matrix increased the chromium content in the passive film, and thus the passive film became more protective.

Application of NX Siemens PLM software in educational process in preparing students of engineering branch

Science.gov (United States)

Sadchikova, G. M.

2017-01-01

This article discusses the results of the introduction of computer-aided design NX by Siemens Plm Software to the classes of a higher education institution. The necessity of application of modern information technologies in teaching students of engineering profile and selection of a software product is substantiated. The author describes stages of the software module study in relation to some specific courses, considers the features of NX software, which require the creation of standard and unified product databases. The article also gives examples of research carried out by the students with the various software modules.

I-deas TMG to NX Space Systems Thermal Model Conversion and Computational Performance Comparison

Science.gov (United States)

Somawardhana, Ruwan

2011-01-01

CAD/CAE packages change on a continuous basis as the power of the tools increase to meet demands. End -users must adapt to new products as they come to market and replace legacy packages. CAE modeling has continued to evolve and is constantly becoming more detailed and complex. Though this comes at the cost of increased computing requirements Parallel processing coupled with appropriate hardware can minimize computation time. Users of Maya Thermal Model Generator (TMG) are faced with transitioning from NX I -deas to NX Space Systems Thermal (SST). It is important to understand what differences there are when changing software packages We are looking for consistency in results.

Concentration of 188Re-Perrhenate for Therapeutic Radiopharmaceuticals

International Nuclear Information System (INIS)

Bokhari, T.H.; Hina, S.; Ahmad, M.; Iqbal, M.

2013-01-01

Summary: Rhenium-188 (T1/2=16.9h) has great potential for a variety of therapeutic applications, including radionuclide synovectomy, oncology and bone pain palliation. The radioactive concentration of 188Re is dependent upon the specific activity of 188W, which dictates the bed size of the alumina/gel column. Due to the high content of inactive tungsten in neutron irradiated WO3, large columns containing aluminum oxide or gel are needed to prepare to double neutron capture based 188W/188Re generators that results in large elution volumes containing relatively high188W contents and low concentrations of /sup 188/ ReO/sub 4/ This decrease in specific volume of 188ReO/sub 4/ places a limitation because a high radioactive concentration of 188ReO4 - is always needed for filling angioplasty balloons or other therapeutic radiopharmaceuticals like188Re -EHDP 188Re -EDTMP, 188Re - MAG3 and 188Re -DTPA. We report post elution concentration of 188ReO4 - using in- house prepared lead cation exchange and alumina columns. Using these columns high bolus volume (10 mL saline) of 188ReO4 - can conveniently be concentrated in 1 mL of physiological saline for therapeutic use. (author)

Stability of rhenium-188 labeled antibody

International Nuclear Information System (INIS)

Lim, B. K.; Jung, J. M.; Jung, J. K.; Lee, D. S.; Lee, M. C.

1999-01-01

For clinical application of beta-emitter labeled antibody, high specific activity is important. Carrier-free Re-188 from W-188/Re-188 generator is an ideal radionuclide for this purpose. However, low stability of Re-188 labeled antibody, especially in high specific activity, due to radiolytic decomposition by high energy (2.1 MeV) beta ray was problem. We studied the stability of Re-188 labeled antibody, and stabilizing effect of several nontoxic radical-quenching agents. Pre-reduced monoclonal antibody (CEA79.4) was labeled with Re-188 by incubating with generator-eluted Re-188-perrhenate in the presence of stannous tartrate for 2 hr at room temperature. Radiochemical purity of each preparation was determined by chromatography (ITLC-SG/acetone, ITLC-SG/Umezawa, Whatman No.1/saline). Human serum albumin was added to the labeled antibodies(2%). Stability of Re-188-CEA79.4 was investigated in the presence of vitamin C, ethanol, or Tween 80 as radical-quenching agents. Specific activities of 4.29∼5.11 MBq/μg were obtained. Labeling efficiencies were 88±4%(n=12). Very low stability after removal of stannous tartrate from the preparation was observed. If stored after purging with N 2 , all the preparations were stable for 10 hr. However, if contacted with air, stability decreased. Perrhenate and Re-188-tartrate was major impurity in declined preparation (12∼47 and 9∼38% each, after 10 hr). Colloid-formation was not a significant problem in all cases. Addition of vitamin C stabilized the labeled antibodies either under N 2 or under air by reducing the formation of perrhenate. High specific activity Re-188 labeled antibody is unstable, especially, in the presence of oxygen. Addition of vitamin C increased the stability

Synthesis of {sup 188}Re-DMSA complex using carrier-free {sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, Kazuyuki; Izumo, Mishiroku [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Islam, M S

1997-03-01

The synthesis of rhenium-DMSA labelled compound using carrier-free {sup 188}Re from the {sup 188}W/{sup 188}Re generator has been carried out. Stannous chloride was used as the reducing agent for reduction of rhenium and ascorbic acid was used as an antioxidant in the reaction media. The dependence of the yield of Re-DMSA complex upon the concentration of reducing agent, pH, reaction time, anti-oxidant, carrier and temperature was investigated. Under optimum conditions, the yield of Re-DMSA complexes were more than 98% for the carrier-free as well as carrier-added {sup 188}Re. The stability of the Re-DMSA complexes at different pH and time were also investigated. It was found that the Re-DMSA complex was very stable and did not undergo any changes or decomposition with the changes of pH from its initial values even after 48 hours of pH change for carrier-free as well as carrier-added complexes. (author)

Investigation of roughing machining simulation by using visual basic programming in NX CAM system

Science.gov (United States)

Hafiz Mohamad, Mohamad; Nafis Osman Zahid, Muhammed

2018-03-01

This paper outlines a simulation study to investigate the characteristic of roughing machining simulation in 4th axis milling processes by utilizing visual basic programming in NX CAM systems. The selection and optimization of cutting orientation in rough milling operation is critical in 4th axis machining. The main purpose of roughing operation is to approximately shape the machined parts into finished form by removing the bulk of material from workpieces. In this paper, the simulations are executed by manipulating a set of different cutting orientation to generate estimated volume removed from the machine parts. The cutting orientation with high volume removal is denoted as an optimum value and chosen to execute a roughing operation. In order to run the simulation, customized software is developed to assist the routines. Operations build-up instructions in NX CAM interface are translated into programming codes via advanced tool available in the Visual Basic Studio. The codes is customized and equipped with decision making tools to run and control the simulations. It permits the integration with any independent program files to execute specific operations. This paper aims to discuss about the simulation program and identifies optimum cutting orientations for roughing processes. The output of this study will broaden up the simulation routines performed in NX CAM systems.

Effect of Atomic Hydrogen on Preparation of Highly Moisture-Resistive SiNx Films at Low Substrate Temperatures

Science.gov (United States)

Heya, Akira; Niki, Toshikazu; Takano, Masahiro; Yonezawa, Yasuto; Minamikawa, Toshiharu; Muroi, Susumu; Minami, Shigehira; Izumi, Akira; Masuda, Atsushi; Umemoto, Hironobu; Matsumura, Hideki

2004-12-01

Highly moisture-resistive SiNx films on a Si substrate are obtained at substrate temperatures of 80°C by catalytic chemical vapor deposition (Cat-CVD) using a source gas with H2. Atomic hydrogen effected the selective etching of a weak-bond regions and an increase in atomic density induced by the energy of the surface reaction. It is concluded that Cat-CVD using H2 is a promising candidate for the fabrication of highly moisture-resistive SiNx films at low temperatures.

46 CFR 188.10-37 - Label.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Label. 188.10-37 Section 188.10-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-37 Label. This term means the label required by 49 CFR part 172...

Rhenium-188-Lipiodol therapy of liver cancer: Optimization of conjugate-view imaging of 188Re for patient-specific dosimetry

International Nuclear Information System (INIS)

Chaudakshetrin, P.; Osorio, M.; Padhy, A.K.; Divgi, C.; Zanzonico, P.

2004-01-01

Full text: Intrahepatic artery Lipiodol labeled with generator-produced, β-emitting 188Re (17 hr; Eβ=0.53-0.70 MeV; Range=4 mm) localizes in and may effectively treat inoperable liver tumors. Although 188Re emits an imageable 155-keV γ ray (15%), its 478- and 633-keV β rays (2.3%) complicate imaging. Our objective was to optimize 188Re image quality and conjugate-view accuracy for quantitative imaging-based patient-specific dosimetry for 188Re-Lipiodol. Using an ADAC dual-EpicO-circumflex-detector gamma camera, 188Re intrinsic and extrinsic (with LEGP, MEGP, and HEGP collimation) uniformities using either 99mTc intrinsic or 188Re extrinsic flood corrections were evaluated. 188Re conjugate view count rate vs. activity concentration linearity as a function of scattering/attenuating medium thickness was then evaluated with and without corrections for attenuation (a 188Re transmission image) and for scatter and septal penetration, subtracting a fraction of counts in a lower-energy (109-140 keV)- and a higher-energy (170-201 keV)-window image, respectively, from the 20% (140-171 keV) photopeak image. Our phantom consisted of 5 10-ml vials containing 25 to 400 μCi/ml of 188Re with 0 to 6 cm at different positions (∼5 cm apart) between the detectors (60 cm apart) and with a 0- to 6-cm thickness of non-radioactive water between the vials and each detector. With a 99mTc intrinsic correction, 188Re intrinsic uniformity was excellent ( 10% and 'tubey'), and was poorer the lower the energy rating of the collimation. Uniformity with HEGP collimation and an extrinsic 188Re correction was acceptable ( 0.95) and the slope (cps/pixel/μCi/ml) was constant +25% (vs +10% for 99mTc) for 0- to 6-cm thicknesses of water. Regardless of the fraction of counts subtracted, neither scatter nor septal-penetration correction improved the slope constancy. Conclusion: Downscatter/septal penetration of the 478- and 633-keV 188Re γ-rays complicates imaging of its 155-keV γ-ray. Using HEGP

46 CFR 188.10-51 - Ocean.

Science.gov (United States)

2010-10-01

... Terms Used in This Subchapter § 188.10-51 Ocean. Under this designation shall be included all vessels navigating the waters of any ocean, or the Gulf of Mexico more than 20 nautical miles offshore. ... 46 Shipping 7 2010-10-01 2010-10-01 false Ocean. 188.10-51 Section 188.10-51 Shipping COAST GUARD...

Enhancement of optical and structural quality of semipolar (11-22) GaN by introducing nanoporous SiNx interlayers

Science.gov (United States)

Monavarian, Morteza; Metzner, Sebastian; Izyumskaya, Natalia; Müller, Marcus; Okur, Serdal; Zhang, Fan; Can, Nuri; Das, Saikat; Avrutin, Vitaliy; Özgür, Ümit; Bertram, Frank; Christen, Juergen; Morkoç, Hadis

2015-03-01

Enhancement of optical and structural quality of semipolar (11‾22) GaN grown by metal-organic chemical vapor deposition on planar m-sapphire substrates was achieved by using an in-situ epitaxial lateral overgrowth (ELO) technique with nanoporous SiNx layers employed as masks. In order to optimize the procedure, the effect of SiNx deposition time was studied by steady-state photoluminescence (PL), and X-ray diffraction. The intensity of room temperature PL for the (11‾22) GaN layers grown under optimized conditions was about three times higher compared to those for the reference samples having the same thickness but no SiNx interlayers. This finding is attributed to the blockage of extended defect propagation toward the surface by the SiNx interlayers as evidenced from the suppression of emissions associated with basal-plane and prismatic stacking faults with regard to the intensity of donor bound excitons (D0X) in lowtemperature PL spectra. In agreement with the optical data, full width at half maximum values of (11‾22) X-ray rocking curves measured for two different in-plane rotational orientations of [1‾100] and [11‾23] reduced from 0.33º and 0.26º for the reference samples to 0.2º and 0.16º for the nano-ELO structures grown under optimized conditions, respectively.

Hybrid Non-Isolated and Non Inverting Nx Interleaved DC-DC Multilevel Boost Converter for Renewable Energy Applications

DEFF Research Database (Denmark)

Bhaskar, Mahajan Sagar; Kulkarni, Rishi M.; Padmanaban, Sanjeevi Kumar

2016-01-01

In this paper hybrid non isolated/ non inverting Nx interleaved DC-DC multilevel Boost Converter for renewable energy applications is presented. The presented hybrid topology is derived from the conventional interleaved converter and the Nx Multilevel boost converter. In renewable energy...... applications, generated energy cannot be directly used at application end. In most of the cases it needs to be stepped up with DC-DC converter at operating voltage levels as per the requirement of the application. Though conventional boost converter can theoretically be used for this purpose, but obtaining...

[Home Daily Hemodialysis with NxStage System One: monocentric italian casistic results].

Science.gov (United States)

Brunati, Chiara; Cassaro, Franca; Cretti, Laura; Izzo, Michela; Pegoraro, Marisa; Negri, Daniela; Gervasi, Francesca; Colussi, Giacomo

2017-09-28

NxStage System One is a new dialytic technology based on easy setup, simplicity of use and reduced dimensions, which is increasingly in use worldwide for home hemodialysis treatments. The system utilizes a low amount of dialysate, usually 15-30 liters according to anthropometric patients' values. The dialysate is supplied at very low flux, generally about 1/3 of blood flow, in order to obtain an elevated saturation of dialysate for solutes. In these conditions the clearance of urea will be almost equal to dialysate flow rate. In order to achieve an obptimal weekly clearance evaluated by Std Kt/V the dialysis sessions are repeated six times a week. In this way a good control of blood voleme can be reached. In this paper we report our experience of treatment with NxStage System One in 12 patients from May 2011 to Dicember 2016. Copyright by Società Italiana di Nefrologia SIN, Rome, Italy.

Role of SiNx Barrier Layer on the Performances of Polyimide Ga2O3-doped ZnO p-i-n Hydrogenated Amorphous Silicon Thin Film Solar Cells

Science.gov (United States)

Wang, Fang-Hsing; Kuo, Hsin-Hui; Yang, Cheng-Fu; Liu, Min-Chu

2014-01-01

In this study, silicon nitride (SiNx) thin films were deposited on polyimide (PI) substrates as barrier layers by a plasma enhanced chemical vapor deposition (PECVD) system. The gallium-doped zinc oxide (GZO) thin films were deposited on PI and SiNx/PI substrates at room temperature (RT), 100 and 200 °C by radio frequency (RF) magnetron sputtering. The thicknesses of the GZO and SiNx thin films were controlled at around 160 ± 12 nm and 150 ± 10 nm, respectively. The optimal deposition parameters for the SiNx thin films were a working pressure of 800 × 10−3 Torr, a deposition power of 20 W, a deposition temperature of 200 °C, and gas flowing rates of SiH4 = 20 sccm and NH3 = 210 sccm, respectively. For the GZO/PI and GZO-SiNx/PI structures we had found that the GZO thin films deposited at 100 and 200 °C had higher crystallinity, higher electron mobility, larger carrier concentration, smaller resistivity, and higher optical transmittance ratio. For that, the GZO thin films deposited at 100 and 200 °C on PI and SiNx/PI substrates with thickness of ~000 nm were used to fabricate p-i-n hydrogenated amorphous silicon (α-Si) thin film solar cells. 0.5% HCl solution was used to etch the surfaces of the GZO/PI and GZO-SiNx/PI substrates. Finally, PECVD system was used to deposit α-Si thin film onto the etched surfaces of the GZO/PI and GZO-SiNx/PI substrates to fabricate α-Si thin film solar cells, and the solar cells’ properties were also investigated. We had found that substrates to get the optimally solar cells’ efficiency were 200 °C-deposited GZO-SiNx/PI. PMID:28788494

Role of SiNx Barrier Layer on the Performances of Polyimide Ga2O3-doped ZnO p-i-n Hydrogenated Amorphous Silicon Thin Film Solar Cells

Directory of Open Access Journals (Sweden)

Fang-Hsing Wang

2014-02-01

Full Text Available In this study, silicon nitride (SiNx thin films were deposited on polyimide (PI substrates as barrier layers by a plasma enhanced chemical vapor deposition (PECVD system. The gallium-doped zinc oxide (GZO thin films were deposited on PI and SiNx/PI substrates at room temperature (RT, 100 and 200 °C by radio frequency (RF magnetron sputtering. The thicknesses of the GZO and SiNx thin films were controlled at around 160 ± 12 nm and 150 ± 10 nm, respectively. The optimal deposition parameters for the SiNx thin films were a working pressure of 800 × 10−3 Torr, a deposition power of 20 W, a deposition temperature of 200 °C, and gas flowing rates of SiH4 = 20 sccm and NH3 = 210 sccm, respectively. For the GZO/PI and GZO-SiNx/PI structures we had found that the GZO thin films deposited at 100 and 200 °C had higher crystallinity, higher electron mobility, larger carrier concentration, smaller resistivity, and higher optical transmittance ratio. For that, the GZO thin films deposited at 100 and 200 °C on PI and SiNx/PI substrates with thickness of ~1000 nm were used to fabricate p-i-n hydrogenated amorphous silicon (α-Si thin film solar cells. 0.5% HCl solution was used to etch the surfaces of the GZO/PI and GZO-SiNx/PI substrates. Finally, PECVD system was used to deposit α-Si thin film onto the etched surfaces of the GZO/PI and GZO-SiNx/PI substrates to fabricate α-Si thin film solar cells, and the solar cells’ properties were also investigated. We had found that substrates to get the optimally solar cells’ efficiency were 200 °C-deposited GZO-SiNx/PI.

H irradiation effects on the GaAs-like Raman modes in GaAs1-xNx/GaAs1-xNx:H planar heterostructures

Science.gov (United States)

Giulotto, E.; Geddo, M.; Patrini, M.; Guizzetti, G.; Felici, M.; Capizzi, M.; Polimeni, A.; Martelli, F.; Rubini, S.

2014-12-01

The GaAs-like longitudinal optical phonon frequency in two hydrogenated GaAs1-xNx/GaAs1-xNx:H microwire heterostructures—with similar N concentration, but different H dose and implantation conditions—has been investigated by micro-Raman mapping. In the case of GaAs0.991N0.009 wires embedded in barriers where GaAs-like properties are recovered through H irradiation, the phonon frequency in the barriers undergoes a blue shift with respect to the wires. In GaAs0.992N0.008 wires embedded in less hydrogenated barriers, the phonon frequency exhibits an opposite behavior (red shift). Strain, disorder, phonon localization effects induced by H-irradiation on the GaAs-like phonon frequency are discussed and related to different types of N-H complexes formed in the hydrogenated barriers. It is shown that the red (blue) character of the frequency shift is related to the dominant N-2H (N-3H) type of complexes. Moreover, for specific experimental conditions, an all-optical determination of the uniaxial strain field is obtained. This may improve the design of recently presented devices that exploit the correlation between uniaxial stress and the degree of polarization of photoluminescence.

The Chemistry of Re-188 Radiopharmaceuticals: Could Re-188 Play the Same Role in Therapy as Tc-99m in Diagnostics?

International Nuclear Information System (INIS)

Duatti, A.

2009-01-01

Radiopharmaceuticals incorporating the β-emitting radionuclide Re-188 are still attracting much interest for their potential application in nuclear medicine as therapeutic agents. There are many advantages of employing this class of radioactive compounds as briefly summarized in the following. (1) Re-188 emits a high-energy β- particle (2.1 MeV) that can be efficiently used to deliver high-dose radiation to the target. (2) Re-188 concomitantly emits a 155-keV γ photon that can be conveniently employed to obtain good-quality SPECT images of the biodistribution of Re-188 radiopharmaceuticals and, ultimately, following in vivo the course of the therapy. (3) Re-188 has a relatively short half-life (17 hours) that may allow multiple treatments of the same patient's disease. (4) Re-188 is a radiometal belonging to the same group of Tc-99m in the transition metal series of the Periodic Table, and shares with its cogener similar (though not identical) chemical properties that could be useful for designing a broad class of Re-188 radiopharmaceuticals having the same biodistribution properties of the corresponding Tc-99m analogues. (5) Similarly to Tc-99m, the radionuclide Re-188 is produced in high-specific activity through the 188 W/ 188 Re transportable generator system. A first challenge encountered in the attempt to develop efficient labeling procedures for Re-188 was related to the low radiochemical yield usually observed in tracer-level preparations of Re-188 radiopharmaceuticals starting from generator-produced [ 188 ReO 4 ]-. This drawback is commonly associated with the low value of the standard reduction potential of the tetraoxo anion as compared to the corresponding Tc-99m pertechnetate anion. In recent years, we reported a simple and efficient procedure for overcoming this problem based on a general chemical principle called 'expansion of the coordination sphere' and involving the addition to the reaction vial of an ancillary ligand (usually, chelating hard

Investigation of microstructure and properties of ultrathin graded ZrNx self-assembled diffusion barrier in deep nano-vias prepared by plasma ion immersion implantation

Science.gov (United States)

Zou, Jianxiong; Liu, Bo; Lin, Liwei; Lu, Yuanfu; Dong, Yuming; Jiao, Guohua; Ma, Fei; Li, Qiran

2018-01-01

Ultrathin graded ZrNx self-assembled diffusion barriers with controllable stoichiometry was prepared in Cu/p-SiOC:H interfaces by plasma immersion ion implantation (PIII) with dynamic regulation of implantation fluence. The fundamental relationship between the implantation fluence of N+ and the stoichiometry and thereby the electrical properties of the ZrNx barrier was established. The optimized fluence of a graded ZrN thin film with gradually decreased Zr valence was obtained with the best electrical performance as well. The Cu/p-SiOC:H integration is thermally stable up to 500 °C due to the synergistic effect of Cu3Ge and ZrNx layers. Accordingly, the PIII process was verified in a 100-nm-thick Cu dual-damascene interconnect, in which the ZrNx diffusion barrier of 1 nm thick was successfully self-assembled on the sidewall without barrier layer on the via bottom. In this case, the via resistance was reduced by approximately 50% in comparison with Ta/TaN barrier. Considering the results in this study, ultrathin ZrNx conformal diffusion barrier can be adopted in the sub-14 nm technology node.

Liquid kit for preparation of 188rhenium-etidronate

International Nuclear Information System (INIS)

Marczewski, Barbara; Dias, Carla Roberta; Moraes, Vanessa; Osso Junior, Joao Alberto

2005-01-01

The aim of this study was the preparation of a liquid kit for radiolabeling of 188 Re-HEDP (hydroxyethylidene diphosphonate). 188 Re was obtained from alumina based 188 W/ 188 Re generators. This paper reports the efficacy of a cold kit stored for more than two weeks, determined by the dependence of the radiolabeling yields of 188 Re-HEDP on the incubation time, reducing agent concentration, the effects of concentration of ligand, the p H of the reaction and the temperature. The cold kits showed a good stability when carrie-free rhenium-188 was added in the reaction mixture. (author)

188Re(V) Nitrido Radiopharmaceuticals for Radionuclide Therapy.

Science.gov (United States)

Boschi, Alessandra; Martini, Petra; Uccelli, Licia

2017-01-19

The favorable nuclear properties of rhenium-188 for therapeutic application are described, together with new methods for the preparation of high yield and stable 188 Re radiopharmaceuticals characterized by the presence of the nitride rhenium core in their final chemical structure. 188 Re is readily available from an 188 W/ 188 Re generator system and a parallelism between the general synthetic procedures applied for the preparation of nitride technetium-99m and rhenium-188 theranostics radiopharmaceuticals is reported. Although some differences between the chemical characteristics of the two metallic nitrido fragments are highlighted, it is apparent that the same general procedures developed for the labelling of biologically active molecules with technetium-99m can be applied to rhenium-188 with minor modification. The availability of these chemical strategies, that allow the obtainment, in very high yield and in physiological condition, of 188 Re radiopharmaceuticals, gives a new attractive prospective to employ this radionuclide for therapeutic applications.

188Re(V) Nitrido Radiopharmaceuticals for Radionuclide Therapy

Science.gov (United States)

Boschi, Alessandra; Martini, Petra; Uccelli, Licia

2017-01-01

The favorable nuclear properties of rhenium-188 for therapeutic application are described, together with new methods for the preparation of high yield and stable 188Re radiopharmaceuticals characterized by the presence of the nitride rhenium core in their final chemical structure. 188Re is readily available from an 188W/188Re generator system and a parallelism between the general synthetic procedures applied for the preparation of nitride technetium-99m and rhenium-188 theranostics radiopharmaceuticals is reported. Although some differences between the chemical characteristics of the two metallic nitrido fragments are highlighted, it is apparent that the same general procedures developed for the labelling of biologically active molecules with technetium-99m can be applied to rhenium-188 with minor modification. The availability of these chemical strategies, that allow the obtainment, in very high yield and in physiological condition, of 188Re radiopharmaceuticals, gives a new attractive prospective to employ this radionuclide for therapeutic applications. PMID:28106830

Application of rapid thermal processing on SiNx thin film to solar cells

Institute of Scientific and Technical Information of China (English)

Youjie LI; Peiqing LUO; Zhibin ZHOU; Rongqiang CUI; Jianhua HUANG; Jingxiao WANG

2008-01-01

Rapid thermal processing (RTP) of SiNx thin films from PECVD with low temperature was investigated. A special processing condition of this technique which could greatly increase the minority lifetime was found in the experiments. The processing mechanism and the application of the technique to silicon solar cells fabrication were dis-cussed. A main achievement is an increase of the minority lifetime in silicon wafer with SiNx thin film by about 200% after the RTP was reached. PC-1D simulation results exhibit an enhancement of the efficiency of the solar cell by 0.42% coming from the minority lifetime improvement. The same experiment was also conducted with P-diffusion silicon wafers, but the increment of minority lifetime is just about 55%. It could be expected to improve the solar cell efficiency if it would be used in silicon solar cells fabrication with the combination of laser firing contact technique.

46 CFR 188.10-11 - Chemistry laboratory.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Chemistry laboratory. 188.10-11 Section 188.10-11 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-11 Chemistry laboratory. This term includes...

Absolute counting of 188Re radiopharmaceuticals

International Nuclear Information System (INIS)

Ravindra, Anuradha; Kulkarni, D.B.; Joseph, Leena; Kulkarni, M.S.

2018-01-01

Rhenium-188 is radiopharmaceutical that belongs to the group of strong beta-weak gamma emitters. It emits high energy beta particles, (E β m ax = 2.12MeV) and weak gamma rays (E γ = 155 keV) hence makes it suitable for wide variety of therapeutic as well as diagnostic applications. Therapeutic applications include therapy of tumors, radionuclide synovectomy, bone pain palliation, intra vascular radiation therapy etc. 188 Re-labeled medicines have been employed increasingly in the therapy of tumors and vascular restenosis. To ensure that patient receives the appropriate radiation dose during the treatment, both the activity standardization and the determination of sensitivity coefficient of the secondary standard for 188 Re have become important tasks. This paper presents the methods and results obtained for the following measurements a) Standardisation of the 188 Re by using the 4π proportional counter (4πPC)-gamma extrapolation method b) Determination of sensitivity coefficient (pA/MBq) of the secondary standard ionization chamber type Centronic IG12, 20A for 188 Re

Monoclonal Antibodies Radiolabeling with Rhenium-188 for Radioimmunotherapy

Science.gov (United States)

Martini, Petra; Pasquali, Micol

2017-01-01

Rhenium-188, obtained from an alumina-based tungsten-188/rhenium-188 generator, is actually considered a useful candidate for labeling biomolecules such as antibodies, antibody fragments, peptides, and DNAs for radiotherapy. There is a widespread interest in the availability of labeling procedures that allow obtaining 188Re-labeled radiopharmaceuticals for various therapeutic applications, in particular for the rhenium attachment to tumor-specific monoclonal antibodies (Mo)Abs for immunotherapy. Different approaches have been developed in order to obtain 188Re-radioimmunoconjugates in high radiochemical purity starting from the generator eluted [188Re]ReO4−. The aim of this paper is to provide a short overview on 188Re-labeled (Mo)Abs, focusing in particular on the radiolabeling methods, quality control of radioimmunoconjugates, and their in vitro stability for radioimmunotherapy (RIT), with particular reference to the most important contributions published in literature in this topic. PMID:28951872

Molecular Characterizations of Surface Proteins Hemagglutinin and Neuraminidase from Recent H5Nx Avian Influenza Viruses

Energy Technology Data Exchange (ETDEWEB)

Yang, Hua; Carney, Paul J.; Mishin, Vasiliy P.; Guo, Zhu; Chang, Jessie C.; Wentworth, David E.; Gubareva, Larisa V.; Stevens, James; Schultz-Cherry, S.

2016-04-06

During 2014, a subclade 2.3.4.4 highly pathogenic avian influenza (HPAI) A(H5N8) virus caused poultry outbreaks around the world. In late 2014/early 2015, the virus was detected in wild birds in Canada and the United States, and these viruses also gave rise to reassortant progeny, composed of viral RNA segments (vRNAs) from both Eurasian and North American lineages. In particular, viruses were found with N1, N2, and N8 neuraminidase vRNAs, and these are collectively referred to as H5Nx viruses. In the United States, more than 48 million domestic birds have been affected. Here we present a detailed structural and biochemical analysis of the surface antigens of H5N1, H5N2, and H5N8 viruses in addition to those of a recent human H5N6 virus. Our results with recombinant hemagglutinin reveal that these viruses have a strict avian receptor binding preference, while recombinantly expressed neuraminidases are sensitive to FDA-approved and investigational antivirals. Although H5Nx viruses currently pose a low risk to humans, it is important to maintain surveillance of these circulating viruses and to continually assess future changes that may increase their pandemic potential.

IMPORTANCEThe H5Nx viruses emerging in North America, Europe, and Asia pose a great public health concern. Here we report a molecular and structural study of the major surface proteins of several H5Nx influenza viruses. Our results improve the understanding of these new viruses and provide important information on their receptor preferences and susceptibilities to antivirals, which are central to pandemic risk assessment.

Controlled nitrogen incorporation in GaNSb alloys

Directory of Open Access Journals (Sweden)

M. J. Ashwin

2011-09-01

Full Text Available The incorporation of N in molecular-beam epitaxy of GaNxSb1−x alloys with x ⩽ 0.022 has been investigated as a function of temperature (325–400°C and growth rate 0.25–1.6 μmh−1. At fixed growth rate, the incorporated N fraction increases as the temperature is reduced until a maximum N content for the particular growth rate reached. At each temperature, there is a range of growth rates over which the N content is inversely proportional to the growth rate; the results are understood in terms of a kinetic model. The systematic growth rate- and temperature-dependence enables the N content and resulting band gap to be controlled.

46 CFR 188.10-3 - Approved container.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Approved container. 188.10-3 Section 188.10-3 Shipping... PROVISIONS Definition of Terms Used in This Subchapter § 188.10-3 Approved container. This term means a container which is properly labeled, marked and approved by DOT for the commodity which it contains. [CGFR...

Theoretical calculation of the Hall mobility of InNxAs1−x alloys when ...

Indian Academy of Sciences (India)

These ternary alloys are used for manufacturing infrared detectors, gas sensors and the ... of carrier concentration, the temperature dependence of Hall mobility was ..... [17] T D Veal, L F J Piper, P H Jefferson, I Mahboob, C F McConville, ...

Affinity of hydroxyapatite by radionuclides parent/child in 188Re/188W generator for radiotherapy

International Nuclear Information System (INIS)

Carrera D, A. A.; Badillo A, V.; Badillo A, V. E.; Monroy G, F.

2009-10-01

To assess the feasibility of using apatites as matrices of 188 W/ 188 Re generator is essential to obtain the distribution coefficients as much of parent radionuclide as child radionuclide in apatite, that is to say to know their affinity for the solid. It was selected the mineral species more representative as adsorbent, the hydroxyapatite Ca 10 (PO 4 ) 6 (OH) 2 it is known for its great capacity of ions retention and by presenting a large affinity for anionic species in their surface. In this paper we use a synthetic hydroxyapatite marketed by Bio-Rad. This paper presents the preliminary results regarding the affinity of hydroxyapatite for the anionic species tungstates (WO 4 2- ) and perrhenates (ReO 4 - in EDTA, as background electrolyte expressed as distribution coefficients between two immiscible phases obtained with the help of radioactive tracers 187 W and 188 Re respectively. The retention measures of these ions, traces show that Bio-Gel hydroxyapatite presents moderate values of distribution coefficients for anionic species of W(Vi) in EDTA 0.01 mol/L that are in the range p H 5 to 6.5; the parent radionuclide of generator 188 Re/ 188 W is fixed but not enough to consider it a good absorbent. By contrast, the fixation of perrhenate ions is virtually wiped as may be easily removed from a hydroxyapatite column packed with a saline solution. The influence of this saline solution in the removal of perrhenate ions is null practically. (Author)

Liquid kit for preparation of {sup 188}rhenium-etidronate

Energy Technology Data Exchange (ETDEWEB)

Marczewski, Barbara; Dias, Carla Roberta; Moraes, Vanessa; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), SP (Brazil). Centro de Radiofarmacia]. E-mail: baszot@gmail.com

2005-10-15

The aim of this study was the preparation of a liquid kit for radiolabeling of {sup 188} Re-HEDP (hydroxyethylidene diphosphonate). {sup 188} Re was obtained from alumina based {sup 188} W/{sup 188} Re generators. This paper reports the efficacy of a cold kit stored for more than two weeks, determined by the dependence of the radiolabeling yields of {sup 188} Re-HEDP on the incubation time, reducing agent concentration, the effects of concentration of ligand, the p H of the reaction and the temperature. The cold kits showed a good stability when carrie-free rhenium-188 was added in the reaction mixture. (author)

The NxStage System One.

Science.gov (United States)

Clark, William R; Turk, Joseph E

2004-01-01

Given the results of recent randomized controlled trials as well as staffing and budget challenges that today face many institutions across North America, a novel therapeutic approach is likely necessary to enable improvements in clinical outcomes for renal failure patients. The NxStage System One was developed to address these challenges. The system is an innovative, flexible device that delivers hemodialysis, hemofiltration, and/or ultrafiltration therapies to patients with renal failure or fluid overload. The unique characteristics of this system include a highly automated system design with a drop-in cartridge to facilitate training and simple operation; portable size and independence from dedicated infrastructure to minimize practical barriers to where therapy may be administered; use of high-quality premixed treatment fluids to enable capture of the potential clinical benefits of fluid purity without the hassles of local water treatment; and wide operating ranges to allow clinician flexibility in patient therapy prescriptions. In both the chronic and acute care environments, the System One presents clinicians with a new platform for delivering patient therapy improvements within real-world constraints.

46 CFR 188.10-59 - Recognized classification society.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Recognized classification society. 188.10-59 Section 188... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-59 Recognized classification society. This term means the American Bureau of Shipping or other classification society...

Frequent hemodialysis with NxStage system in pediatric patients receiving maintenance hemodialysis.

Science.gov (United States)

Goldstein, Stuart L; Silverstein, Douglas M; Leung, Jocelyn C; Feig, Daniel I; Soletsky, Beth; Knight, Cathy; Warady, Bradley A

2008-01-01

Recent evidence from adult hemodialysis (HD) patient studies reveal improved biochemical control and reported health-related quality of life after transition from conventional thrice weekly to daily home maintenance HD treatment. Published pediatric frequent dialysis experiences demonstrate similar improvement but all used conventional HD machines, which employ a treated municipal water supply, thereby frequently exposing patients to proinflammatory components. We report our pediatric experience with six-times-weekly HD using the NxStage system, which uses sterile dialysis fluid to provide dialysis in the home or center setting. Four patients (weight range 38-61.4 kg) completed the 16-week study. Patients exhibited progressive reductions in casual pretreatment systolic and diastolic blood pressures, discontinuation of antihypertensive medications, and decreased blood pressure load by ambulatory blood pressure monitoring. Mean serum phosphorus improved without change in phosphorus binder medication, and all three patients with a normalized protein catabolic rate 1.1 g/kg per day. Patients reported no adverse effects. Variable changes in proinflammatory cytokine levels were observed. We suggest that frequent HD with the NxStage system be considered for children who would benefit from home-based maintenance dialysis.

Prototype design based on NX subdivision modeling application

Science.gov (United States)

Zhan, Xianghui; Li, Xiaoda

2018-04-01

Prototype design is an important part of the product design, through a quick and easy way to draw a three-dimensional product prototype. Combined with the actual production, the prototype could be modified several times, resulting in a highly efficient and reasonable design before the formal design. Subdivision modeling is a common method of modeling product prototypes. Through Subdivision modeling, people can in a short time with a simple operation to get the product prototype of the three-dimensional model. This paper discusses the operation method of Subdivision modeling for geometry. Take a vacuum cleaner as an example, the NX Subdivision modeling functions are applied. Finally, the development of Subdivision modeling is forecasted.

Half-life measurements in doubly-odd sup(186,188,190)Au nuclei and the 188Hg -> Au decay

International Nuclear Information System (INIS)

Abreu, M.C.; Berg, V.; Fransson, K.; Hoeglund, A.; Oms, J.; Porquet, M.G.

1985-01-01

A level scheme has been established for 188 Hg -> Au decay which was studied with the online isotope separator ISOCELE. Precise conversion-electron measurements were performed with a semicircular magnetic spectrograph. The half-lives of the 16.0, 82.7 and 114.8 keV levels in 188 Au were measured with a lens electron spectrometer and reduced transition rates were deduced. Similarly the half-lives of the 36.1, 113.9, 227.7, 251.5, 288.0 and 363.6 keV levels in 186 Au and of the 28.9 and 171.5 keV levels in 190 Au were measured. Comparison of the reduced e.m. transition rates shows that a 1 + and a 2 - state have respectively the same structure in sup(186,) sup(188,) sup(190,) 192 Au, the same conclusion holding for the 1 - sub(g.s.) of sup(188,) sup(190,) 192 Au. Additional measurements in 189 , 191 Hg and 185 , 187 Au together with data from the literature enable us to interpret them as a coupling of certain quasiparticle states of neighbouring odd-A nuclei corresponding to oblate shapes. Indications are given that some other negative- and positive-parity states in 188 Au also belong to an oblate system. The nucleus 188 Au appears as the last of a series of doubly-odd gold nuclei where no shape coexistence has, as yet, been observed. (orig.)

Bone uptake by di and tetraphosphonates labeled with Rhenium-188

International Nuclear Information System (INIS)

Faintuch, B.L.; Osso, J.A. Jr.; Muramoto, E.; Faintuch, S.

2002-01-01

MDP (methylenediphosphonate) and HEDP (hydroxyethylidenediphosphonate), both diphosphonates, and EDTMP (ethylenediamine tetramethylene phosphonic acid) a tetraphosphonate ligand, have been labeled with 188 Re for use in metastatic bone-pain palliation. The aim of this study was a comparison between the three complexes 188 Re-MDP, 188 Re-HEDP and 188 Re-EDTMP concerning the complexation conditions, in order to achieve maximum yield, stability and bone uptake. Methods: MDP was dissolved in water and HEDP and EDTMP were dissolved in NaOH 1N followed by decreasing pH with HCl 1N. To all mixtures stannous chloride and 188 ReO 4 were added in a nitrogen atmosphere. The preparations were heated in a boiling water bath for 15 min. The yields as well as the radiochemical stability were estimated by ITLC. Different concentrations of phosphonates and stannous chloride were evaluated. Biodistribution studies in swiss mice were done for the three 188 Re-phosphonates that presented the best radiochemical yield. Results: For 188 Re-MDP and 188 Re-HEDP the optimal ligand concentration for maximum complexation was 30 mg whereas for 188 Re-EDTMP, it was 40 mg. The best amount of SnCl 2 .2H 2 O was 2 mg/mL for MDP, 3 mg/mL for HEDP and 1 mg/mL for EDTMP. In these conditions the three complexes showed a complexation yield above 95%. All of them presented 4-hour radiochemical stability without the need for ascorbic acid solution, but for 24 hours this stability existed only in the presence of that substance otherwise re-oxidation of 188 Re occurred. All products showed a great uptake by the kidneys. 188 Re-EDTMP had the greatest uptake by the bone (3.13 ± 0.18% ID/g) followed by 188 Re-MDP (1.18 ± 0.05%ID/g) and 188 Re-HEDP (1.03 ± 0.12 %ID/g), 4 hour postinjection. 188 Re-EDTMP displayed a bone/muscle ratio of 28.5, 188 Re-MDP 4.9 and 188 Re-HEDP 4.9. Conclusion: 188 Re-EDTMP demonstrated the best potential as a radiopharmaceutical for bone cancer pain relief, encouraging further

Crystal and Electronic Structures, Photoluminescence Properties of Eu2+-Doped Novel Oxynitride Ba4Si6O16-3x/2Nx

Directory of Open Access Journals (Sweden)

Takashi Takeda

2010-03-01

Full Text Available The crystal structure and the photoluminescence properties of novel green Ba4-yEuySi6O16-3x/2Nx phosphors were investigated. The electronic structures of the Ba4Si6O16 host were calculated by first principles pseudopotential method based on density functional theory. The results reveal that the top of the valence bands are dominated by O-2p states hybridized with Ba-6s and Si-3p states, while the conduction bands are mainly determined by Ba-6s states for the host, which is an insulator with a direct energy gap of 4.6 eV at Γ. A small amount of nitrogen can be incorporated into the host to replace oxygen and forms Ba4-yEuySi6O16-3x/2Nx solid solutions crystallized in a monoclinic (space group P21/c, Z = 2 having the lattice parameters a = 12.4663(5 Å, b = 4.6829(2 Å, c = 13.9236(6 Å, and β = 93.61(1°, with a maximum solubility of nitrogen at about x = 0.1. Ba4Si6O16-3x/2Nx:Eu2+ exhibits efficient green emission centered at 515–525 nm varying with the Eu2+ concentration when excited under UV to 400 nm. Furthermore, the incorporation of nitrogen can slightly enhance the photoluminescence intensity. Excitation in the UV-blue spectral range (λexc = 375 nm, the absorption and quantum efficiency of Ba4-yEuySi6O16-3x/2Nx (x = 0.1, y = 0.2 reach about 80% and 46%, respectively. Through further improvement of the thermal stability, novel green phosphor of Ba4-yEuySi6O16-3x/2Nx is promising for application in white UV-LEDs.

Affinity of hydroxyapatite by radionuclides parent/child in {sup 188}Re/{sup 188}W generator for radiotherapy; Afinidad de la hidroxiapatita por los radionuclidos padre/hijo en el generador {sup 188}Re/{sup 188}W para radioterapia

Energy Technology Data Exchange (ETDEWEB)

Carrera D, A. A. [Universidad Autonoma de Zacatecas, Unidad Academica de Ciencias Quimicas, Campus Universitario Siglo XXI, Ejido La Escondida, Carretera a Guadalajara Km. 6 (Mexico); Badillo A, V. [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Calle Cipres No. 10, Fracc. La Penuela 98068, Zacatecas (Mexico); Badillo A, V. E.; Monroy G, F. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: ana_carrera7@hotmail.com

2009-10-15

To assess the feasibility of using apatites as matrices of {sup 188}W/{sup 188}Re generator is essential to obtain the distribution coefficients as much of parent radionuclide as child radionuclide in apatite, that is to say to know their affinity for the solid. It was selected the mineral species more representative as adsorbent, the hydroxyapatite Ca{sub 10} (PO{sub 4}){sub 6}(OH){sub 2} it is known for its great capacity of ions retention and by presenting a large affinity for anionic species in their surface. In this paper we use a synthetic hydroxyapatite marketed by Bio-Rad. This paper presents the preliminary results regarding the affinity of hydroxyapatite for the anionic species tungstates (WO{sub 4}{sup 2-}) and perrhenates (ReO{sub 4}{sup -} in EDTA, as background electrolyte expressed as distribution coefficients between two immiscible phases obtained with the help of radioactive tracers {sup 187}W and {sup 188}Re respectively. The retention measures of these ions, traces show that Bio-Gel hydroxyapatite presents moderate values of distribution coefficients for anionic species of W(Vi) in EDTA 0.01 mol/L that are in the range p H 5 to 6.5; the parent radionuclide of generator {sup 188}Re/{sup 188}W is fixed but not enough to consider it a good absorbent. By contrast, the fixation of perrhenate ions is virtually wiped as may be easily removed from a hydroxyapatite column packed with a saline solution. The influence of this saline solution in the removal of perrhenate ions is null practically. (Author)

CFD Analysis of Thermal Control System Using NX Thermal and Flow

Science.gov (United States)

Fortier, C. R.; Harris, M. F. (Editor); McConnell, S. (Editor)

2014-01-01

The Thermal Control Subsystem (TCS) is a key part of the Advanced Plant Habitat (APH) for the International Space Station (ISS). The purpose of this subsystem is to provide thermal control, mainly cooling, to the other APH subsystems. One of these subsystems, the Environmental Control Subsystem (ECS), controls the temperature and humidity of the growth chamber (GC) air to optimize the growth of plants in the habitat. The TCS provides thermal control to the ECS with three cold plates, which use Thermoelectric Coolers (TECs) to heat or cool water as needed to control the air temperature in the ECS system. In order to optimize the TCS design, pressure drop and heat transfer analyses were needed. The analysis for this system was performed in Siemens NX Thermal/Flow software (Version 8.5). NX Thermal/Flow has the ability to perform 1D or 3D flow solutions. The 1D flow solver can be used to represent simple geometries, such as pipes and tubes. The 1D flow method also has the ability to simulate either fluid only or fluid and wall regions. The 3D flow solver is similar to other Computational Fluid Dynamic (CFD) software. TCS performance was analyzed using both the 1D and 3D solvers. Each method produced different results, which will be evaluated and discussed.

Study of different absorbent materials for the preparation of generator systems of 99Mo - 99mTc and 188W-188Re

International Nuclear Information System (INIS)

Lopes, Paula Regina Corain; Osso Junior, Joao Alberto

2009-01-01

Amongst some currently radioisotopes, 99m Tc and 188 Re present adequate decay properties for use in Nuclear Medicine. In the current times the most diagnosis examinations are performed with 99m Tc and 188 Re is one radioisotope of potential use in therapy techniques. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molybdenum and tungsten, aiming the optimization of generator systems of 99 Mo- 99m Tc and 188 W- 188 Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum and tungsten were percolated through different chromatographic columns containing different commercial adsorbent materials such as: PZC (poly-zirconium compound), acid alumina and calcinated alumina used in the routine preparation of 99 Mo- 99m Tc generators at IPEN. The tungsten ( 188 W), as well the PZC used in this project, supplied by Russia and Japan, respectively, through the International Atomic Energy Agency (IAEA) and used without any previous preparation. Also trace amounts of 99 Mo and 188 W were added to the initial solutions and the generators were assembled. The 99 Mo- 99m Tc generators were then eluted with known volumes of 0.9% NaCl solution every 24 hours whereas the 188 W- 188 Re generators were eluted every 48 hours. The eluted samples were analyzed by Gamma Spectroscopy and later submitted to quality control evaluation. The results showed that the PZC presents superior retention capacity for Mo of 97.50mg Mo/gPZC, higher than in acid and calcinated alumina, however the elution efficiency at lower pHs is not so high. With regards to the experiments carried out with 188 W and alumina, it was verified that the elution efficiency of 188 Re was not reproducible and the retention capacity of W was 90.23mgW/gAl 2 O 3 at pH 7. (author)

Neutron induced reactions II: (n,x) reactions on medium and heavy nuclei

International Nuclear Information System (INIS)

Cindro, N.

1976-01-01

Recent interest in (n,x) reactions in the MeV and above range of energies is concentrated on two main subjects: the mechanism of nucleon emission (precompound in particular) and the possible role of clustering in the emission of complex particles. Hence the first two sections of this paper will be devoted to these two subjects. In the last section some other subjects that have recently emerged in the field are discussed

Complexation of 188Re-phosphonates: in vitro and in vivo studies

International Nuclear Information System (INIS)

Faintuch, B.L.; Muramoto, E.; Faintuch, S.

2003-01-01

MDP (methylenediphosphonate) and HEDP (hydroxyethylidene diphosphonate), both disphosphonates, and EDTMP (ethylenediamine tetramethylene phosphonic acid), a tetraphosphonate ligand, have been previously labeled with 188 Re for use in metastatic bone-pain palliation. The aim of this study was a comparison between the three complexes 188 Re-MDP, 188 Re-HEDP and 188 Re-EDTMP concerning the complexation conditions, in order to achieve maximum yield, stability and bone uptake. Methods: MDP was dissolved in water and HEDP and EDTMP were dissolved in NaOH 1 N followed by reduction of pH with HCl 1 N. To all mixtures stannous chloride and 188 ReO 4 - were added in a nitrogen atmosphere. The preparations were heated in boiling water bath for 15 min. Yield as well as radiochemical stability was estimated by ITLC. Different concentrations of phosphonates and stannous chloride were evaluated. Biodistribution studies in Swiss mice were done for the three 188 Re-phosphonates that presented the best radiochemical yield. The optimal ligand concentration for maximum complexation was 85.2 mM for MDP, 72.8 mM for HEDP and 45.8 mM for EDTMP. The best amount of SnCl 2 .2H 2 O was 1.5 mg/mL for 188 Re-HEDP and 1 mg/mL for both 188 Re-MDP and 188 Re-EDTMP. In these conditions the three complexes showed a complexation rate above 95%. Reasonable radiochemical stability for 24 hours was achieved by 188 Re-EDTMP when employing ascorbic acid. All products showed a great uptake by the kidneys. 188 Re-EDTMP had the greatest uptake by femur (3.1 ± 0.2% ID/g) followed by 188 Re-MDP (1.2 ± 0.1% ID/g) and 188 Re-HEDP (1.0 ± 0.1% ID/g), 4 hours post injection. 188 Re-EDTMP displayed a femur bone/muscle ratio of 28.5, 188 Re-MDP 4.9 and 188 Re-HEDP 4.9. In conclusion 188 Re-EDTMP demonstrated the best potential as a radiopharmaceutical for bone cancer pain relief, encouraging further dosimetric studies and clinical trials. (orig.)

47 CFR 1.88 - Predesignation pleading procedure.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Predesignation pleading procedure. 1.88 Section... Rules of Practice and Procedure Miscellaneous Proceedings § 1.88 Predesignation pleading procedure. In... staff, in its discretion, may in writing, advise such licensee of the general nature of the...

Studies of gel metal-oxide composite samples as filling materials for W-188/Re-188 generator column

Czech Academy of Sciences Publication Activity Database

Iller, E.; Polkowska-Motrenko, H.; Lada, W.; Wawszczak, D.; Sypula, M.; Doner, K.; Konior, M.; Milczarek, J.; Zoladek, J.; Ráliš, Jan

2009-01-01

Roč. 281, č. 1 (2009), s. 83-86 ISSN 0236-5731. [9th International Conference on Nuclear Analytical Methods in the Life Sciences. Lisbon, 07.09.2008-12.09.2008] Institutional research plan: CEZ:AV0Z10480505 Keywords : W-188/Re-188 generator * W-Zr gels * W-Zr composites * Sol-gel process Subject RIV: CH - Nuclear ; Quantum Chemistry Impact factor: 0.631, year: 2009

46 CFR 154.188 - Membrane tank: Inner hull steel.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Membrane tank: Inner hull steel. 154.188 Section 154.188... STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Hull Structure § 154.188 Membrane tank: Inner hull steel. For a vessel with membrane tanks, the inner hull...

Study on the preparation and stability of 188Re biomolecules via EHDP

International Nuclear Information System (INIS)

Ferro-Flores, G.; Garcia-Salinas, L.; Paredes-Gutierrez, L.; Hashimoto, K.; Melendez-Alafort, L.; Murphy, C.A.

2001-01-01

A direct labelling technique via ethane-1-hydroxy-1,1-diphosphonic acid (EHDP) as a weak competing ligand was developed for the preparation of several biomolecules: 188 Re-monoclonal antibody ior cea1 against carcinoembryonic antigen ( 188 Re-MoAb), biotinylated 188 Re-MoAb ( 188 Re-MoAb-biotin), 188 Re-polyclonal IgG ( 188 Re-IgG), 188 Re-peptide (somatostatine analogue peptide b-(2-naphtyl)-D-Ala-Cys-Tyr-D-Trp-Lys-Val-Cys-Thr-amide), 188 Re-MoAb fragments ( 188 Re-F(ab') 2 ) and biotinylated 188 Re-F(ab') 2 ( 188 Re-F(ab') 2 -biotin). The reaction conditions such as pH, temperature, weak ligand concentration and stannous chloride concentration were optimized during the radiolabelling of each biomolecule. Before the labelling procedure, disulphide bridge groups of the biomolecules were reduced with 2-mercaptoethanol (2-ME). To obtain 188 Re labelled antibodies and peptides in high radiochemical yields (>90%) via EHDP, it was necessary to use acidic conditions and a high concentration of stannous chloride to allow the redox reaction Re +7 →Re +5 :Re +4 . The labelling of MoAb and F(ab') 2 with 188 Re via EHDP was also evaluated employing a pretargeted technique by avidin-biotin strategy in normal mice, demonstrating that the 188 Re-labelled biotinylated antibodies are stable complexes in vivo. The 188 Re-peptide complex prepared by this method, was stable for 24 h and no radiolytic degradation was observed. (author)

The Synthesis And Characterization Of Wolfram Phthalocyanine For The Target Material Of High Specific Activity Radioisotope Wolfram - 188 (188W)

International Nuclear Information System (INIS)

Setiawan, Duyeh

2000-01-01

The application of 188 Re radioisotope separation on aluminia column through elution solution has increased significantly since the last two decades. The 188 Re radioisotope has been done fram 188 Re beta-decay through a neutron capture radiation on wolfram -186 target. In trhe column separation, high specific activity of 188 W radioisotope is required to get sufficient activity in small quality 188 W radioisotope has been carried out in this research. Wolfram-phthalocyanine compound was prepared by refluxing a mixture of wolfram trioxyde, (WO 3 ) and phthalonitrile, (C 8 H 4 N 2 ) at 250 o C for two hours. The synthesis of wolfram phthalocyanine is 70% purity yield, the product are green crystals, have a 193,0-193,8 o C melting points, and has a molecular formula C 3 2H 1 6 N8 WO 2 . The infra red spectrum of wolfram-phthalocyanine was the absorption band at 964,3 cm - 1 was due to the vibration of W=O bond of the wolfram dioxy-phthalocyanine. The x-ray diffraction of the wolfram dioxy-phthalocyanine was similar with molybdenum dioxy-phthalocyanine compound. This fact showed that the product was wolfram dioxy-phthalocyanine

Production of carrier-free 188Re in the past ten years in Taiwan

International Nuclear Information System (INIS)

Bor-Tsung Hsieh; Institute of Nuclear Energy Research, Taiwan; Wan-Yu Lin; Tsai-Yueh Luo; Kai-Yuan Cheng

2007-01-01

Twenty clinical scale alumina-based 188 W/ 188 Re generators and carrier-free 188 Re has been produced at the Institute of Nuclear Energy Research (INER-Taiwan) for over ten years. 2845.6 GBq (76.9 Ci) of 188 Re-perrhenate solution has been eluted from generators during the past ten years. We have used the harvesting 188 Re solution for labeling radiopharmaceuticals, such as 188 Re-HEDP, 188 Re-MDP, 188 Re-microsphere, 188 Relipiodol, and 188 Re-sulfur colloid, etc. The average eluting yield of 188 Re is 78.6±5.8% that was investigated at 1115 harvesting times from 20 generators. Each generator can be used more than six months but the Millipore needs to be changed every two months for smooth harvesting and high yield of 188 Re solution. (author)

Nature of the fundamental band gap in GaNxP1-x alloys

International Nuclear Information System (INIS)

Shan, W.; Walukiewicz, W.; Yu, K. M.; Wu, J.; Ager, J. W. III; Haller, E. E.; Xin, H. P.; Tu, C. W.

2000-01-01

The optical properties of GaN x P 1-x alloys (0.007≤x≤0.031) grown by gas-source molecular-beam epitaxy have been studied. An absorption edge appears in GaN x P 1-x at energy below the indirect Γ V -X C transition in GaP, and the absorption edge shifts to lower energy with increasing N concentration. Strong photomodulation signals associated with the absorption edges in GaN x P 1-x indicate that a direct fundamental optical transition is taking place, revealing that the fundamental band gap has changed from indirect to direct. This N-induced transformation from indirect to direct band gap is explained in terms of an interaction between the highly localized nitrogen states and the extended states at the Γ conduction-band minimum. (c) 2000 American Institute of Physics

Space modeling with SolidWorks and NX

CERN Document Server

Duhovnik, Jože; Drešar, Primož

2015-01-01

Through a series of step-by-step tutorials and numerous hands-on exercises, this book aims to equip the reader with both a good understanding of the importance of space in the abstract world of engineers and the ability to create a model of a product in virtual space – a skill essential for any designer or engineer who needs to present ideas concerning a particular product within a professional environment. The exercises progress logically from the simple to the more complex; while SolidWorks or NX is the software used, the underlying philosophy is applicable to all modeling software. In each case, the explanation covers the entire procedure from the basic idea and production capabilities through to the real model; the conversion from 3D model to 2D manufacturing drawing is also clearly explained. Topics covered include modeling of prism, axisymmetric, symmetric, and sophisticated shapes; digitization of physical models using modeling software; creation of a CAD model starting from a physical model; free fo...

The ML1Nx2 Phosphatidylinositol 3,5-Bisphosphate Probe Shows Poor Selectivity in Cells.

Science.gov (United States)

Hammond, Gerald R V; Takasuga, Shunsuke; Sasaki, Takehiko; Balla, Tamas

2015-01-01

Phosphatidylinositol (3,5)-bisphosphate (PtdIns(3,5)P2) is a quantitatively minor phospholipid in eukaryotic cells that plays a fundamental role in regulating endocytic membrane traffic. Despite its clear importance for cellular function and organism physiology, mechanistic details of its biology have so far not been fully elucidated. In part, this is due to a lack of experimental tools that specifically probe for PtdIns(3,5)P2 in cells to unambiguously identify its dynamics and site(s) of action. In this study, we have evaluated a recently reported PtdIns(3,5)P2 biosensor, GFP-ML1Nx2, for its veracity as such a probe. We report that, in live cells, the localization of this biosensor to sub-cellular compartments is largely independent of PtdIns(3,5)P2, as assessed after pharmacological, chemical genetic or genomic interventions that block the lipid's synthesis. We therefore conclude that it is unwise to interpret the localization of ML1Nx2 as a true and unbiased biosensor for PtdIns(3,5)P2.

40 CFR 159.188 - Failure of performance information.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Failure of performance information. 159.188 Section 159.188 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... submitted concerning substantiation of any incident of a pest having developed resistance to any pesticide...

19 CFR 122.188 - Issuance of temporary Customs access seal.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Issuance of temporary Customs access seal. 122.188 Section 122.188 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY AIR COMMERCE REGULATIONS Access to Customs Security Areas § 122.188 Issuance of...

Dosimetric evaluation of anti-CD20 labelled with 188Re

International Nuclear Information System (INIS)

Barrio, Graciela; Osso Junior, Joao A.

2011-01-01

Radioimmunotherapy has the potential to deliver lethal radiation energy directly to malignant cells via targeting of radioisotope-conjugated monoclonal antibodies (MAbs) to specific antigens. B-cell lymphoma is a particularly good candidate for radioimmunotherapy because the disease is inherently radiosensitive, malignant cells in the blood, bone marrow, spleen and lymphonodes are accessible, and MAbs have been developed to B-cell surface antigens that do not shed or modulate. Rituximab (RTX), the human IgG1-type chimeric form of the parent murine antibody ibritumomab, is specifically targeted against CD20, a surface antigen expressed by pre-B and mature human B lymphocytes. The use of rhenium-188 from a 188 W/ 188 Re generator system represents an attractive alternative radionuclide for therapy. 188 Re is produced from beta decay of the 188 W parent. In addition to the emission of high-energy electrons (Eβ= 2118 keV), 188 Re also decays with emission of a gamma photon with an energy of 155 keV in 15% abundance. Besides the therapeutic usefulness of 188 Re, the emission of gamma photon is an added advantage since the biodistribution of 188 Re-labeled antibodies can be evaluated in vivo with a gamma camera. Also, rhenium has chemical properties similar to technetium. Thus, both can be conjugated to antibodies using similar chemistry methods. The objective of this work is to prove the usefulness of this radiopharmaceutical based on dosimetric studies, that are also required by the Brazilian Regulatory Agency (ANVISA). (author)

188Re labeling and biodistribution of magnetic nanoparticles for the tumor targeting

International Nuclear Information System (INIS)

Li Guiping; Zhang Hui; Wang Yongxian; Zhang Chunfu

2006-01-01

Objective: To prepare 188 Re labeled monoclonal antibody (Herceptin)-coated magnetic nanoparticles for tumor targeting and to study its biodistribution in mice. Methods: Herceptin and histidine were covalently linked to the amine group upon silica-coated magnetic nanoparticles modified by N-[3-(trimethyoxysilyl)prowl]-ethylenediamine using glutaraldehyde method. The Herceptin-coated magnetic nanoparticles and Herceptin were radiolabeled with 188 Re by a direct labelling method, whereas the histidine-coated magnetic nanoparticles was radiolabeled with 188 Re using fac-[ 188 Re(CO) 3 (H 2 0) 3 ] + as a precursor. The labelling efficiency and immunoreactivity as well as labelling stability were determined. Also, the biodistribution of 188 Re-magnetic and 188 Re-Herceptin-magnetic nanoparticles were observed in mice. Results: Herceptin-coated magnetic nanoparticles was characterized by transmission electron microscope (TEM) with diameter about 60 nm, while histidine-coated magnetic nanoparticles about 30 nm. The labeling efficiency for 188 Re-Herceptin, 188 Re-magnetic nanoparticles and 188 Re-Herceptin-magnetic nanoparticles were all > 90% and had a better stability in vitro. The immunoreactivity of Herceptin linked to magnetic nanoparticles was still high. The biodistribution in mice was shown that 188 Re-magnetic nanoparticles and 188 Re-Herceptin- magnetic nanoparticles had higher radioactivity levels in blood. Magnetic nanoparticles with diameter of 30 or 60 nm had a long half-life in blood stream and were accumulated in liver. Conclusion: The efficiency and stability of labelling Herceptin-coated magnetic nanoparticles and labelling magnetic nanoparticles with 188 Re are suitable for in vivo study in tumor-beating nude mice models. (authors)

46 CFR 188.05-5 - Specific application noted in text.

Science.gov (United States)

2010-10-01

... which the text pertains, and in many cases limits the application of the text to vessels contracted for... 46 Shipping 7 2010-10-01 2010-10-01 false Specific application noted in text. 188.05-5 Section 188... GENERAL PROVISIONS Application § 188.05-5 Specific application noted in text. (a) At the beginning of the...

Animal experiment on 188Re-radioactive nanometre particle esophageal stent

International Nuclear Information System (INIS)

Chu Jianjun; Yang Bo; Zhao Difei; Wang Mingzhi; Sun Liang; Jiang Wei

2004-01-01

Objective: To investigate the mechanism and clinical reliability of applying 188 Re-radioactive nanometre particle esophageal stent. Methods: An elastic meshed esophageal stent made of double membranous nickel-titanium alloy and loaded with 188 Re-radioactive nanometre particles was used . The stent was introduced into the esophagus of eight experimental pigs and fixed in place. Two pigs served as controls. With the pig aneasthetized, the stent with good expandability was placed in the proper position. Radioactive MBq was applied to the 8 experiment pigs while the two control pigs received only the stent without the radioactive material. Three hours after the insertion of the stent, the pigs were allowed to feed, without any choking observed. Results: Seven days after the treatment of pathologic experiment pigs showed infla mmatory celluar infilfration, congestion and edema in the mucosa and submucous layer. After 21 days, some parts of the esophageal mucosa showed thickening of the vascular layer of the blood vessels and scanty fibrous hyperplasia. Seven days after application of larger dose of 259 MBq stent, pathology examination carried out in the experiment pigs showed extensive infla mmatory cellular infilfration, edema and congestion in the muscles and submucosa, and patch-like necrosis. Twenty-one days after application, repairing fibrous hyperplasia appeared. In the control pigs, not even any traumatic damage was observed. Periodic checking of the stool did not show any leakage of radioactivity and there was no displacement of the stents as confirmed by X-ray exam. Conclusions: The stent is effective to maintain an unobstructed passage of food . The loaded radioactive particles can be concentrated in the target area and adjusted by a body surface magnetic modulation and inhibit the intraluminal epithelial growth of esophageal mucosa without any severe radiation reaction or damage. It is quite promising to resolve the obstruction of advanced esophageal

Study of different absorbent materials for the preparation of generator systems of {sup 99}Mo - {sup 99m}Tc and {sup 188}W-{sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Lopes, Paula Regina Corain; Osso Junior, Joao Alberto, E-mail: paulinhacorain@usp.b, E-mail: jaosso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2009-07-01

Amongst some currently radioisotopes, {sup 99m}Tc and {sup 188}Re present adequate decay properties for use in Nuclear Medicine. In the current times the most diagnosis examinations are performed with {sup 99m}Tc and {sup 188}Re is one radioisotope of potential use in therapy techniques. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molybdenum and tungsten, aiming the optimization of generator systems of {sup 99}Mo-{sup 99m}Tc and {sup 188}W-{sup 188}Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum and tungsten were percolated through different chromatographic columns containing different commercial adsorbent materials such as: PZC (poly-zirconium compound), acid alumina and calcinated alumina used in the routine preparation of {sup 99}Mo-{sup 99m}Tc generators at IPEN. The tungsten ({sup 188}W), as well the PZC used in this project, supplied by Russia and Japan, respectively, through the International Atomic Energy Agency (IAEA) and used without any previous preparation. Also trace amounts of {sup 99}Mo and {sup 188}W were added to the initial solutions and the generators were assembled. The {sup 99}Mo-{sup 99m}Tc generators were then eluted with known volumes of 0.9% NaCl solution every 24 hours whereas the {sup 188}W-{sup 188}Re generators were eluted every 48 hours. The eluted samples were analyzed by Gamma Spectroscopy and later submitted to quality control evaluation. The results showed that the PZC presents superior retention capacity for Mo of 97.50mg Mo/gPZC, higher than in acid and calcinated alumina, however the elution efficiency at lower pHs is not so high. With regards to the experiments carried out with {sup 188}W and alumina, it was verified that the elution efficiency of {sup 188}Re was not reproducible and the retention capacity of W was 90.23mgW/gAl{sub 2}O{sub 3} at pH 7. (author)

Study of different adsorbent materials for the preparation of generator systems of 99Mo - 99mTc and 188W-188Re

International Nuclear Information System (INIS)

Lopes, Paula Regina Corain

2009-01-01

Amongst some existing radioisotopes, 99m Tc and 188 Re present adequate physical chemical properties for use in Nuclear Medicine in the areas of diagnosis and therapy, respectively. Moreover, these radioisotopes can be distributed to medical centers in the form of generator systems of 99 Mo- 99m Tc and 188 W- 188 Re, allowing autonomy and practicity in use. The objective of this work consists of determining the capacity of some adsorbent materials for retention of molibdenium and tungsten, aiming the optimization of generator systems of 99 Mo- 99 mTc and 188 W- 188 Re with suitable characteristics for application in Nuclear Medicine. Known amounts, in mass, of molybdenum (Mo) and tungsten (W) were added to the loading solutions previously prepared, with values of pH adjusted between 1 and 7, and these were then percolated through different devices containing in its interior alumina, resin or poly-zirconium compound also known as PZC. The elutions were carried out within an interval of time of approximately 24 hours for the generator systems of 99 Mo - 99 mTc and 48 hours for the generator systems of 188 W- 188 Re due to the difference between the half-lives of radionuclides involved in the reactions. The eluted samples from both generator systems containing 99m Tc or 188 Re were submitted to quality control tests aiming to evaluate the radionuclidic, radiochemical and chemical purity, but no significant contamination for 99 Mo, 188 W, technetium or rhenium in the colloidal states and zirconium were detected in the eluted solutions and in the solutions extracted with saline solution for any value of pH studied. The commercial alumina cartridges known as Acid Sep Pak were more efficient in retaining the molybdenum in the loading solutions when compared with the others commercial retention devices employed. However, when this comparison extends to the chromatographic alumina columns, the use of acid alumina as adsorbent is more efficient when compared to the Acid Sep

Study on the pharmacal of 186,188Re-SZ39

International Nuclear Information System (INIS)

Zu Jianhua; Wu Yuanfang; Dong Mo; Li Huiyuan; ZhangYulong

2000-01-01

The stability, immunocompetence and cytotoxicity in tumor as well as tumor inhibiting rate of 186,188 Re-SZ39 are investigated. The results indicate that 186,188 Re-SZ39 is stable in vivo by imaging and the volume of tumor of nude mice reduced obviously. So 186,188 Re-SZ39 has a strong cytotoxicity effect against glioma cells and is of good prospect as immuno-radiotherapeutic agent

Optimization of labelling procedure of 188rE-DMSA(v)

International Nuclear Information System (INIS)

Dantas, Danielle M.; Brambilla, Tania P.; Reis, Nicoli F.; Osso Junior, Joao A.

2011-01-01

Radionuclide therapy (RNT) is emerging as an important tool of nuclear medicine. Apart from the well established 131 I, several other promising radionuclides have been identified, among them 188 Re, 90 Y and 177 Lu. 188 Re has received a lot of attention in the past decade, due to its favourable nuclear characteristics [t 1/2 16.9 h, E b eta m ax 2.12 MeV and E g amma 155 keV (15%) suitable for imaging, including the fact that it is carrier-free and can be obtained cost-effectively through the generator 188 W- 188 Re. Biodistribution studies of 188 Re-DMSA(V) have shown that its general pharmacokinetic properties are similar to that of 99m Tc-DMSA(V), so this agent could be used for targeted radiotherapy of medullary thyroid carcinoma, bone metastases, soft tissue and others tumors. The aim of this work is to evaluate two labeling procedures for the preparation of 188 Re-DMSA(V). The first method was prepared using a commercial kit of DMSA(III) for labeling with 99m Tc at high temperature (100 deg C). The second method was prepared in a vial containing 2.5 mg of DMSA, 1.00 mg of SnCl 2 .2H 2 O and 10 mg of sodium oxalate, 10 mg of cyclodextrin, in a total volume of 2.0 mL. The pH was adjusted to 3 with 37% HCl. After labeling the solution was stirred and incubated for 30 min at room temperature. The radiochemical purity was determined using TLC-SG developed with two different solvent systems: Acetone and glycine. Preliminary results for both methods of labeling 188 Re-DMSA(V) showed that the labeling yield was >95%. Further experiments are also necessary to optimize the labeling methodology of 188 Re-DMSA(V).author)

Synthesis and characterization of hydroxyapatite (HAp) for binder tungstate in 188W/188Re generator system

International Nuclear Information System (INIS)

Eni Hartati; Yati B Yuliyati; Duyeh Setiawan

2014-01-01

In this study, the synthesis of hydroxyapatite has been carried out through a process of precipitation of calcium hydroxide (Ca(OH) 2 ) with phosphoric acid (H 3 PO 4 ) based on acid base reaction process that produce crystalline solid and then it will be used for binder tungstate in 188 W/ 188 Re generator system. The purpose of this study were to characterize the results of synthesized hydroxyapatite and to determine the optimum conditions on generator 188 W/ 188 Re performance such as activation of the heating hydroxyapatite, pH of Na 2 WO 4 , reaction temperature, distribution coefficient and the adsorption capacity (adsorption coefficient) of hydroxyapatite. The characterization of synthesized hydroxyapatite was done using FTIR, XRD and SEM-EDAX, while the determination of the optimum condition of each parameters based on distribution coefficient and adsorption capacity hydroxyapatite using spectrophotometric method. The FTIR results of hydroxyapatite (Ca 10 (PO 4 ) 6 (OH) 2 ) showed the appearance of peaks in the O-H stretching wave number (υ) and 3434.9 cm -1 and 563.8 cm -1 , while the group PO 4 -3 is shown by the P-O bond in (υ) 1033.8 cm -1 . The XRD results indicate that hydroxyapatite had three peaks at 2θ region is 31,875° , 32,205° and 33,080°. Characterization by SEM showed columnar morphology with a particle size of 200 nm. The optimum conditions of each parameter obtained at hydroxyapatite heating temperature 100 °C, Na 2 WO 4 solution pH 3, and the reaction temperature of 60 °C, which gave result on distribution coefficients of 193.74 mL/g and adsorption capacity (adsorption coefficient) of 5.20 mg W/g HAp. (author)

Lithium in old open clusters - NGC 188

International Nuclear Information System (INIS)

Hobbs, L.M.; Pilachowski, C.

1988-01-01

Echelle spectra which include the Li I line at 6707 A are reported for seven main-sequence stars and one subgiant in NGC 188. The Li I line is detected in five of the six dwarfs which are highly probable cluster members. The derived atmospheric Li/H ratios exceed the solar value by factors ranging approximately from 10 to 40, although these apparently closely solarlike stars are about twice as old as the sun. The variation of the lithium abundance with stellar mass along the main sequences of the Pleiades, the Hyades, NGC 752, and NGC 188 are compared. The resulting evolutionary pattern indicates that the lithium fraction in the Galactic gas has shown no appreciable change from Li/H of roughly 10 to the -9th since the birth of NGC 188 about 10 Gyr ago, except that the abundance could have been higher by an uncertain but possibly appreciable factor at the beginning of that epoch. 51 references

Lifetime measurements in shape transition nucleus 188Pt

Science.gov (United States)

Rohilla, Aman; Gupta, C. K.; Singh, R. P.; Muralithar, S.; Chakraborty, S.; Sharma, H. P.; Kumar, A.; Govil, I. M.; Biswas, D. C.; Chamoli, S. K.

2017-04-01

Nuclear level lifetimes of high spin states in yrast and non-yrast bands of 188Pt nucleus have been measured using recoil distance plunger setup present at IUAC, Delhi. In the experiment nuclear states of interest were populated via 174Yb(18O,4 n)188Pt reaction at a beam energy of 79MeV provided by 15 UD Pelletron accelerator. The extracted B(E2\\downarrow) values show an initial rise up to 4+ state and then a nearly constant behavior with spin along yrast band, indicating change of nuclear structure in 188Pt at low spins. The good agreement between experimental and TPSM model B(E2\\downarrow) values up to 4^+ state suggests an increase in axial deformation of the nucleus. The average absolute β2 = 0.20 (3) obtained from measured B(E2\\downarrow) values matches well the values predicted by CHFB and IBM calculations for oblate ( β2 ˜ -0.19) and prolate (β2 ˜ 0.22) shapes. As the lifetime measurements do not yield the sign of β2, no definite conclusion can be drawn on the prolate or oblate collectivity of 188Pt on the basis of present measurements.

46 CFR 188.27-1 - Lifesaving appliances and arrangements.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Lifesaving appliances and arrangements. 188.27-1 Section... VESSELS GENERAL PROVISIONS Lifesaving Appliances and Arrangements § 188.27-1 Lifesaving appliances and arrangements. All lifesaving appliances and arrangements shall be in accordance with the requirements for...

Dosimetric evaluation of anti-CD20 labelled with {sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Barrio, Graciela; Osso Junior, Joao A., E-mail: gracielabarrio@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

Radioimmunotherapy has the potential to deliver lethal radiation energy directly to malignant cells via targeting of radioisotope-conjugated monoclonal antibodies (MAbs) to specific antigens. B-cell lymphoma is a particularly good candidate for radioimmunotherapy because the disease is inherently radiosensitive, malignant cells in the blood, bone marrow, spleen and lymphonodes are accessible, and MAbs have been developed to B-cell surface antigens that do not shed or modulate. Rituximab (RTX), the human IgG1-type chimeric form of the parent murine antibody ibritumomab, is specifically targeted against CD20, a surface antigen expressed by pre-B and mature human B lymphocytes. The use of rhenium-188 from a {sup 188}W/{sup 188}Re generator system represents an attractive alternative radionuclide for therapy. {sup 188}Re is produced from beta decay of the {sup 188}W parent. In addition to the emission of high-energy electrons (E{beta}= 2118 keV), {sup 188}Re also decays with emission of a gamma photon with an energy of 155 keV in 15% abundance. Besides the therapeutic usefulness of {sup 188}Re, the emission of gamma photon is an added advantage since the biodistribution of {sup 188}Re-labeled antibodies can be evaluated in vivo with a gamma camera. Also, rhenium has chemical properties similar to technetium. Thus, both can be conjugated to antibodies using similar chemistry methods. The objective of this work is to prove the usefulness of this radiopharmaceutical based on dosimetric studies, that are also required by the Brazilian Regulatory Agency (ANVISA). (author)

188Re-microspheres of albumin - the potential preparation for radiotherapy

International Nuclear Information System (INIS)

Dyomin, D.N.; Petriev, V.M.

2000-01-01

In this paper author describe preparation the albumin microspheres labelled with rhenium-188. We undertake an attempt to develop kits to the generator of rhenium-188 on the basis of albumin microspheres for radiotherapy of both oncological and non-oncological diseases. Microspheres, rhenium-188 with sizes 1 0-20 micron for treatment of rheumatoid arthritis (damage of large and intermediate joints), intraperitoneal administration and intrapleural administration at metastases covering a cavity. Microspheres, Re-188 with sizes 40-60 micron for treatment of disseminated kidney cancer (intraarterial, selectively), intratumoral administration to damaged nodules less than 2-3 cm. Microspheres, Re-188 with sizes 80-100 micron for large neoplasms and metastases of liver (intraarterial, selectively), intratumoral administration to damaged nodules with sizes over 3 cm. Preparation of albumin microspheres is carried out by thermal denaturation of protein in vegetable oil. Microspheres are obtained with the necessary range of sizes by ultrasonic fractionation. At our laboratory the method of preparation of albumin microspheres with any sizes of particles (from 5 -10 up to 800 -1000 microns) has been developed. (authors)

Comparative studies of antibody anti-CD20 labeled with 188Re

International Nuclear Information System (INIS)

Dias, Carla Roberta de Barros Rodrigues

2010-01-01

Nuclear Medicine is an unique and important modality in oncology and the development of new tumor-targeted radiopharmaceuticals for both diagnosis and therapy is an area of interest for researchers. Rituximab (RTX) is a quimeric monoclonal antibody (mAb) (IgG 1) that specifically binds to CD20 antigen with high affinity and has been successfully used for the treatment of Non-Hodgkin Lymphoma (NHL) of cell B. The CD20 antigen is expressed over more than 90% of cell B NHL. Technetium-99m ( 99m Tc) and rhenium-188 ( 188 Re) are an attractive radionuclide pair for clinical use due to their favorable decay properties for diagnosis ( 99m Tc: T 1/2 = 6 h, γ radiation = 140 keV) and therapy ( 188 Re: T 1/2 = 17 h, maximum β energy = 2.12 MeV) and to their availability in the form of 99 Mo/ 99 mTc and 188 W/ 188 Re generators. The radionuclides can be conjugated to mAb using similar chemical procedures. The aim of this work was to study the labeling of anti-CD20 mAb (RTX) with 188 Re using two techniques: the direct labeling method [ 188 Re(V)] and the labeling method via the carbonyl nucleus [ 188 Re(I)]. Besides the quality control, the radiolabeled mAb was submitted to in vivo, in vitro and ex vivo biological studies. For the direct labeling, RTX was reducing by incubation with 2-mercaptoethanol for generating sulphydryl groups (-SH) and further labeled with 188 Re(V), in a study of several parameters in order to reach an optimized formulation. The labeling via the carbonyl nucleus both 99 mTc and 188 Re were employed through 2 different procedures: (1) labeling of intact RTX with 99 mTc(I) and (2) reduced RTX (RTX red ) labeled with 99 mTc(I)/ 188 Re(I). Also a parameter study was performed to obtain an optimized formulation. The quality control method for evaluating the radiochemical purity showed a good labeling yield (93%) for the direct method. The labeling method via carbonyl group, the results showed that the - SH groups of RTX red are a possible way of labeling

Modeling and simulation of five-axis virtual machine based on NX

Science.gov (United States)

Li, Xiaoda; Zhan, Xianghui

2018-04-01

Virtual technology in the machinery manufacturing industry has shown the role of growing. In this paper, the Siemens NX software is used to model the virtual CNC machine tool, and the parameters of the virtual machine are defined according to the actual parameters of the machine tool so that the virtual simulation can be carried out without loss of the accuracy of the simulation. How to use the machine builder of the CAM module to define the kinematic chain and machine components of the machine is described. The simulation of virtual machine can provide alarm information of tool collision and over cutting during the process to users, and can evaluate and forecast the rationality of the technological process.

Digital development of products with NX9 for academical areas

Science.gov (United States)

Goanta, A. M.

2015-11-01

International competitiveness forced the manufacturing enterprises to look for new ways to accelerate the development of digital products through innovation, global alliances and strategic partnerships. In an environment of global research and development of distributed geographically, all members of the joint teams made up of companies and universities need to access updated and accurate information about products created by any of the type employed, student, teacher. Current design processes involve more complex products consisting of elements of design created by multiple teams, disciplines and suppliers using independent CAD systems. Even when using a 3D CAD mature technology, many companies fail to significantly reduce losses in the process, improve product quality or product type to ensure successful innovations to market arouse interest. These challenges require a radical rethinking of the business model, which belongs to the field of design, which must be based on digital development of products based on integrated files. Through this work, the author has proposed to provide both synthesis and transformations brought news of the integrated NX [1, 2, 3] from Siemens PLM Software 9, following a news results detailed documentary study, and personal results obtained by applying the same version, the digital and integrated development of a product type device test beams. Based on educational license received for NX 9 was made a detailed study of the innovations made by this release, and the application of some of them went to graphical modelling and getting all the documentation of a test device bearing beams. Also, were synthesized in terms of methodology, the steps to take to obtain graphical documentation. The results consist of: 3D models of all parts and assembly 3D model of the three-dimensional constraints of all component parts and not least respectively all drawings and assembly drawing. The most important consequence of the paper is the obtaining of

Study of radiation synovectomy using 188Re-sulfide

International Nuclear Information System (INIS)

Chen Gang; Li Peiyong; Jiang Xufeng; Zhang Liying; Wang Xuefeng; Sun Zhenming; Zhang Huan

2002-01-01

Objective: To study the radiation synovectomy with 188 Re-sulfide. Methods: Thirty cases were divided into 2 groups, the group with hemophilia and the group with rheumatoid arthritis (RA). Patients with joint synovitis were injected different doses of 188 Re-sulfide, 222 - 444 MBq intra-articular. MRI was taken before and 3 - 6 months after the radiation synovectomy to evaluate the treatment efficacy, and the symptoms were also evaluated. Results: MRI study showed that after the treatment the synovium became thiner and the edema was reduced in the lesioned joint. The symptoms were improved with the pain relieved and duration of intra-articular hemorrhage reduced. Conclusions: Radiation synovectomy using 188 Re-sulfide has effects on synovitis. It can be used clinically to improve the symptoms of joint synovitis and reduce the duration of intra-articular hemorrhage

Labelling of Re-ABP with 188Re for bone pain palliation

International Nuclear Information System (INIS)

Arteaga de Murphy, Consuelo; Ferro-Flores, Guillermina; Pedraza-Lopez, Martha; Melendez-Alafort, Laura; Croft, B.Y.Barbara Y.; Ramirez, Flor de Maria; Padilla, Juan

2001-01-01

Etidronate and medronate have been labelled with technetium-99m ( 99m Tc-HEDP, 99m Tc-MDP) for bone scanning and, with rhenium-188 ( 188 Re-HEDP) to palliate the pain resulting from bone metastases. The objective of this study was to label alendronate, ABP, a new bisphosphonate, with SnF 2 -reduced- 188 Re. The reagents for the 5 mg ABP kit were SnF 2 , KReO 4 and gentisic acid at acid pH. The chemical, spectroscopic and microscopic characteristics, quality control, rat bone uptake of [ 188 Re]Re-ABP and similarities with 99m Tc-ABP are presented. We conclude that this is a promising new radiopharmaceutical for bone metastases pain palliation

Experimental study of the biological properties of 188Re-Hepama-1 biologic superparamagnetic nanoparticles

International Nuclear Information System (INIS)

Feng Yanlin; Tan Jiaju; Sun Jing; Wen Guanghua; Wu Xiaolian; Liang Sheng; Xia Jiaoyun

2007-01-01

Objective: To investigate a new biologic-superparamagnetic nanoparticles's characteristics of immunological activity, biological distributing in vivo, targeting and inhibiting tumor effect. Methods: The experimental group 188 Re-Hepama-l-superparamagnetic nanoparticles, and control groups, including 188 ReO 4 - , 188 Re-Hepama-1, and 188 Re-superparamagnetic nanoparticles, were set up. The distributions were measured after injection 4 h and 24 h by caudal vein of Kuming mice. The magnetic targeting experiments in vivo were clone with and without magnetic field in liver after injection in New Zealand rabbit. The inhibiting tumor effect on hepatic cancer cell lines SMMC-7721 of the above four 188 Re labeled products were measured by mono nuclear cell direct cytotoxicity assay method. Results: After injection 4 h and 24 h by vein, the liver taking was highest in group 188 Re-Hepama-l-superparamagnetic nanoparticles. The radiative activity in liver in magnetism zoo was higher than in non magnetism zoo in 188 Re- Hepama-1-superparamagnetic nanoparticles after applying magnetic field in left lobe of liver, and the ratio of in magnetism zoo to non magnetism zoo was 1.87. And the half effective inhibition radioactive concentrations (IC 50 ) in 188 Re-Hepama-l-superparamagnetic nanoparticles was one forth of 188 ReO 4 - . Conclusion: 188 Re- Hepama-l-superparamagnetic nanoparticles showed its fine stability in intro, good immunological activity and significant liver target. (authors)

C-188 cobalt-60 sealed source integrity: source monitoring

International Nuclear Information System (INIS)

Defalco, G.M.; Shah, V.

1995-01-01

The integrity of C-188 cobalt-60 sealed sources used for radiation processing will be a key factor in the continued industrial acceptance and growth of gamma irradiation technology. Given the public's relatively poor understanding of most nuclear topics and the news media's tendency to sensationalize events, it is appropriate for suppliers and users of gamma technology to be vigilant and conservative regarding the application of cobalt-60 sources to industrial purposes. Nordion's recent decision to extend the optional warranty on its C-188 cobalt-60 sealed source from 15 years to 20 years is based on over 30 years of data generated from its on-going SOURCE SURVEILLANCE PROGRAM. This paper presents an overview of the C-188 SOURCE SURVEILLANCE PROGRAM. (author)

Poloxamer [corrected] 188 has a deleterious effect on dystrophic skeletal muscle function.

Directory of Open Access Journals (Sweden)

Rebecca L Terry

Full Text Available Duchenne muscular dystrophy (DMD is an X-linked, fatal muscle wasting disease for which there is currently no cure and limited palliative treatments. Poloxomer 188 (P188 is a tri-block copolymer that has been proposed as a potential treatment for cardiomyopathy in DMD patients. Despite the reported beneficial effects of P188 on dystrophic cardiac muscle function, the effects of P188 on dystrophic skeletal muscle function are relatively unknown. Mdx mice were injected intraperitoneally with 460 mg/kg or 30 mg/kg P188 dissolved in saline, or saline alone (control. The effect of single-dose and 2-week daily treatment was assessed using a muscle function test on the Tibialis Anterior (TA muscle in situ in anaesthetised mice. The test comprises a warm up, measurement of the force-frequency relationship and a series of eccentric contractions with a 10% stretch that have previously been shown to cause a drop in maximum force in mdx mice. After 2 weeks of P188 treatment at either 30 or 460 mg/kg/day the drop in maximum force produced following eccentric contractions was significantly greater than that seen in saline treated control mice (P = 0.0001. Two week P188 treatment at either dose did not significantly change the force-frequency relationship or maximum isometric specific force produced by the TA muscle. In conclusion P188 treatment increases susceptibility to contraction-induced injury following eccentric contractions in dystrophic skeletal muscle and hence its suitability as a potential therapeutic for DMD should be reconsidered.

Compartmental and dosimetric studies of anti-CD20 labelled with {sup 188}Re; Estudo compartimental e dosimetrico do Anti-CD20 marcado com {sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Kuramoto, Graciela Barrio

2016-10-01

The radioimmunotherapy (RIT) uses MAbs conjugated to radionuclides α or β{sup -} emitters, both for therapy. Your treatment is based on the irradiation and tumor destruction, preserving the normal organs as the excess radiation. Radionuclides β{sup -} emitters as {sup 131}I, {sup 90}Y, {sup 188}Re {sup 177}Lu and are useful for the development of therapeutic radiopharmaceuticals and, when coupled with MAb and Anti-CD20 it is important mainly for the treatment of non-Hodgkin's lymphomas (NHL). {sup 188}Re (E{sub β} = 2.12 MeV; E{sub γ} = 155 keV; t1/2 = 16.9 h) is an attractive radionuclide for RIT. However, {sup 188}Re can be obtained from a radionuclide generator of {sup 188}W/{sup 188}Re, commercially available, making it convenient for use in research and for clinical routine. The CR of IPEN has a project aimed at the production of radiopharmaceutical {sup 188}Re-Anti-CD20, where the radionuclide can be obtained from a generator system {sup 188}W/{sup 188}Re. With this proposed a study to assess the efficiency of this labeling technique for treatment in accordance compartmental and dosimetry. The objective of this study was to compare the marking of anti-CD20 MAb with {sup 188}Re with the marking of the antibody with {sup 90}Y, {sup 131}I, {sup 177}Lu and {sup 99m}Tc (for their similar chemical characteristics) and {sup 211}At, {sup 213}Bi, {sup 223}Ra and {sup 225}Ac); through the study of labeling techniques reported in literature, the proposal of a compartmental model to evaluate its pharmacokinetic and dosimetric studies, high interest for therapy. The result of the study shows a favorable kinetics for {sup 188}Re, by their physical and chemical characteristics compared to the other evaluated radionuclides. The compartment proposed study describes the metabolism of {sup 188}Reanti- CD20 through a compartment mammillary model, which by their pharmacokinetic analysis, performed compared to products emitters β{sup -131}I-labeled anti CD20, {sup 177

Radiolabeling of anti-CD20 with Re0-188: liquid kit

International Nuclear Information System (INIS)

Dias, Carla Roberta; Osso Junior, Joao Alberto

2007-01-01

Radioimmunotherapy uses the targeting features of monoclonal antibody to deliver radiation from an attached radionuclide. The radionuclide 188 Re is currently produced from the father nuclide 188 W through a transportable generator system. Because of its easy availability and suitable nuclear properties (E βMAX =2.1 MeV, t 1/2 =16.9 h, E γ =155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agents and could be conveniently utilized for imaging and dosimetric purposes. The objective of this work is the optimization of radiolabeling of anti-CD20 with 188 Re using a liquid formulation. Anti-CD20 was reduced by incubation with 2-ME and purified over a PD-10 column. The number of resulting free SH was assayed with Ellman's reagent. Optimization of radiolabeling was achieved by varying parameters: antibody mass, reducing agent, reaction time and 188 Re volume in the liquid kit. Radiochemical purity of 188 Re-anti-CD20 was evaluated. An average of 12 SH groups per mol in the reductions was found. The best labeling efficiency (> 93%) was achieved in the following conditions: 1 mg anti-CD20; 82.8 mg sodium tartrate; 1 mg SnCl 2 ; 0.25 mg gentisic acid, 1 mL 188 Re and reaction time of 1 hour at room temperature. (author)

Optimization of labelling procedure of {sup 188}rE-DMSA(v)

Energy Technology Data Exchange (ETDEWEB)

Dantas, Danielle M.; Brambilla, Tania P.; Reis, Nicoli F.; Osso Junior, Joao A., E-mail: jaosso@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

Radionuclide therapy (RNT) is emerging as an important tool of nuclear medicine. Apart from the well established {sup 131}I, several other promising radionuclides have been identified, among them {sup 188}Re, {sup 90}Y and {sup 177}Lu. {sup 188}Re has received a lot of attention in the past decade, due to its favourable nuclear characteristics [t{sub 1/2} 16.9 h, E{sub b}eta{sub m}ax 2.12 MeV and E{sub g}amma 155 keV (15%) suitable for imaging, including the fact that it is carrier-free and can be obtained cost-effectively through the generator {sup 188}W-{sup 188}Re. Biodistribution studies of {sup 188}Re-DMSA(V) have shown that its general pharmacokinetic properties are similar to that of {sup 99m}Tc-DMSA(V), so this agent could be used for targeted radiotherapy of medullary thyroid carcinoma, bone metastases, soft tissue and others tumors. The aim of this work is to evaluate two labeling procedures for the preparation of {sup 188}Re-DMSA(V). The first method was prepared using a commercial kit of DMSA(III) for labeling with {sup 99m}Tc at high temperature (100 deg C). The second method was prepared in a vial containing 2.5 mg of DMSA, 1.00 mg of SnCl{sub 2}.2H{sub 2}O and 10 mg of sodium oxalate, 10 mg of cyclodextrin, in a total volume of 2.0 mL. The pH was adjusted to 3 with 37% HCl. After labeling the solution was stirred and incubated for 30 min at room temperature. The radiochemical purity was determined using TLC-SG developed with two different solvent systems: Acetone and glycine. Preliminary results for both methods of labeling {sup 188}Re-DMSA(V) showed that the labeling yield was >95%. Further experiments are also necessary to optimize the labeling methodology of {sup 188}Re-DMSA(V).author)

Estimation of the Binding Free Energy of AC1NX476 to HIV-1 Protease Wild Type and Mutations Using Free Energy Perturbation Method.

Science.gov (United States)

Ngo, Son Tung; Mai, Binh Khanh; Hiep, Dinh Minh; Li, Mai Suan

2015-10-01

The binding mechanism of AC1NX476 to HIV-1 protease wild type and mutations was studied by the docking and molecular dynamics simulations. The binding free energy was calculated using the double-annihilation binding free energy method. It is shown that the binding affinity of AC1NX476 to wild type is higher than not only ritonavir but also darunavir, making AC1NX476 become attractive candidate for HIV treatment. Our theoretical results are in excellent agreement with the experimental data as the correlation coefficient between calculated and experimentally measured binding free energies R = 0.993. Residues Asp25-A, Asp29-A, Asp30-A, Ile47-A, Gly48-A, and Val50-A from chain A, and Asp25-B from chain B play a crucial role in the ligand binding. The mutations were found to reduce the receptor-ligand interaction by widening the binding cavity, and the binding propensity is mainly driven by the van der Waals interaction. Our finding may be useful for designing potential drugs to combat with HIV. © 2015 John Wiley & Sons A/S.

Country Report: Rep. of Korea. {sup 188}re-Tricabonyl Labeling Strategy: Preparation of 1{sup 188}Re(I) Tricarbonyl Precursor [{sup 188}Re(OH{sub 2}){sub 3}(CO){sub 3}]+ for the Labeling of Biomolecules

Energy Technology Data Exchange (ETDEWEB)

Park, Sang Hyun [Radiation Research Division for Biotechnology, Korea Atomic Energy Research Institute (Korea, Republic of)

2010-07-01

The {sup 99m}Tc(I) and {sup 188}Re(I) tricarbonyl precursors [M(OH{sub 2}){sub 3}(CO){sub 3}]{sup +} have been shown to be excellent starting materials for the synthesis of {sup 99m}Tc(I) and {sup 188}Re(I) tricarbonyl complexes as well as radiolabeling of target-specific biomolecules.{sup 1-8} Recently, a user-friendly kit formulation (IsoLink{sup TM}) was developed using potassium boranocarbonate, K{sub 2}[BH{sub 3}CO{sub 2}], for preparation of the {sup 99m}Tc precursor complex. This solid reagent serves both as a source of carbon monoxide and a reducing agent for technetium. It was also used by Schibli and coworkers for the preparation of the corresponding {sup 188}Re precursor complex (“Schibili’s kit”).{sup 9} This approach involved the reduction of [{sup 188}Re]perrhenate eluate (1 ml) in neutral solution with 3 mg K{sub 2}[BH{sub 3}CO{sub 2}] and 5 mg BH3≅NH3 by incubation at 60 °C for 15 min. The amounts of reducing agents and acid (concentrated phosphoric acid) were carefully balanced not only to avoid fast hydrolysis of the boranes, but also to maintain a sufficiently low pH to stabilize reduced rhenium intermediates. The preparations resulted in yields >85 % of the desired precursor complex. In addition, perrhenate (7±3 %), colloidal {sup 188}ReO{sub 2} (<5 %), and a byproduct of unknown composition were also detected. To increase the yields even further, we evaluated the recently described borohydride exchange resin (BER) as an additional reducing agent and an anion scavengers.

Radiolabeling of anti-CD20 with Re0-188: liquid kit

Energy Technology Data Exchange (ETDEWEB)

Dias, Carla Roberta; Osso Junior, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mail: carlarobertab@yahoo.com.br; jaosso@ipen.br

2007-07-01

Radioimmunotherapy uses the targeting features of monoclonal antibody to deliver radiation from an attached radionuclide. The radionuclide {sup 188}Re is currently produced from the father nuclide {sup 188}W through a transportable generator system. Because of its easy availability and suitable nuclear properties (E{sub {beta}}{sub MAX} =2.1 MeV, t{sub 1/2}=16.9 h, E{sub {gamma}}=155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agents and could be conveniently utilized for imaging and dosimetric purposes. The objective of this work is the optimization of radiolabeling of anti-CD20 with {sup 188}Re using a liquid formulation. Anti-CD20 was reduced by incubation with 2-ME and purified over a PD-10 column. The number of resulting free SH was assayed with Ellman's reagent. Optimization of radiolabeling was achieved by varying parameters: antibody mass, reducing agent, reaction time and {sup 188}Re volume in the liquid kit. Radiochemical purity of {sup 188}Re-anti-CD20 was evaluated. An average of 12 SH groups per mol in the reductions was found. The best labeling efficiency (> 93%) was achieved in the following conditions: 1 mg anti-CD20; 82.8 mg sodium tartrate; 1 mg SnCl{sub 2}; 0.25 mg gentisic acid, 1 mL {sup 188}Re and reaction time of 1 hour at room temperature. (author)

34 CFR 668.188 - Preventing evasion of the consequences of cohort default rates.

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Preventing evasion of the consequences of cohort default rates. 668.188 Section 668.188 Education Regulations of the Offices of the Department of Education... Two Year Cohort Default Rates § 668.188 Preventing evasion of the consequences of cohort default rates...

Lifetime measurements in shape transition nucleus {sup 188}Pt

Energy Technology Data Exchange (ETDEWEB)

Rohilla, Aman; Gupta, C.K.; Chamoli, S.K. [University of Delhi, Department of Physics and Astrophysics, New Delhi (India); Singh, R.P.; Muralithar, S. [Inter University Accelerator Centre, New Delhi (India); Chakraborty, S.; Sharma, H.P. [Banaras Hindu University, Department of Physics, Varanasi (India); Kumar, A.; Govil, I.M. [Panjab University, Department of Physics, Chandigarh (India); Biswas, D.C. [Bhabha Atomic Research Center, Nuclear Physics Division, Trombay, Mumbai (India)

2017-04-15

Nuclear level lifetimes of high spin states in yrast and non-yrast bands of {sup 188}Pt nucleus have been measured using recoil distance plunger setup present at IUAC, Delhi. In the experiment nuclear states of interest were populated via {sup 174}Yb({sup 18}O,4n){sup 188}Pt reaction at a beam energy of 79MeV provided by 15 UD Pelletron accelerator. The extracted B(E2 ↓) values show an initial rise up to 4{sup +} state and then a nearly constant behavior with spin along yrast band, indicating change of nuclear structure in {sup 188}Pt at low spins. The good agreement between experimental and TPSM model B(E2 ↓) values up to 4{sup +} state suggests an increase in axial deformation of the nucleus. The average absolute β{sub 2} = 0.20 (3) obtained from measured B(E2 ↓) values matches well the values predicted by CHFB and IBM calculations for oblate (β{sub 2} ∝ -0.19) and prolate (β{sub 2} ∝ 0.22) shapes. As the lifetime measurements do not yield the sign of β{sub 2}, no definite conclusion can be drawn on the prolate or oblate collectivity of {sup 188}Pt on the basis of present measurements. (orig.)

Labeling of MDP with 188Re for bone tumour therapy

International Nuclear Information System (INIS)

Barbezan, Angelica B.; Osso Junior, Joao A.

2011-01-01

188 Re is one of the most attractive radioisotopes for a variety of therapeutic applications in nuclear medicine, due to its physical decay properties, such as β - emission of 2.12 MeV, γ emission of 155 keV and half life of 16.9 hours. Biphosphonates are potent inhibitors of osteoclastic bone resorption and are effective in several diseases that cause bone fragility and bone metastases. Because of these characteristics, labeled biphosphonates have been studied for bone pathologies, also acting as palliation of bone pain in case of metastasis.The aim of this study was to optimize the labeling of a phosphonate-MDP (Sodium Methylene Diphosphonate) with 188 Re for use in bone pain palliation. 188 Re was obtained by eluting a 188 W- 188 Re generator from POLATOM. The labeling was performed at room temperature using MDP, SnCl 2 as reducing agent and ascorbic acid. The variables studied were: Mass of ligand (3, 6 and 10 mg), reducing agent mass (5, 7, 10 and 11 mg), ascorbic acid mass (1, 3, 5 and 6 mg), pH (1 and 2) and time of reaction (15, 60, 120, 360 and 4320 minutes), that also reflected the stability of the radiopharmaceutical. The radiochemical control, that also measures the labeling efficiency was evaluated by paper chromatography using Whatman 3MM paper and the solvents acetone and 0.9%NaCl. The best formulation was the following: Mass of ligand MDP: 10 mg, mass of SnCl 2 : 5 mg, ascorbic acid mass: 3 mg, time of reaction: 30 minutes, pH: 1. Under optimum conditions, 188 Re MDP radiolabeling yield was 98,07% and the radiopharmaceutical was stable up to 72 h. (author)

The growth of the metallic ZrNx thin films on P-GaN substrate by pulsed laser deposition

Science.gov (United States)

Gu, Chengyan; Sui, Zhanpeng; Li, Yuxiong; Chu, Haoyu; Ding, Sunan; Zhao, Yanfei; Jiang, Chunping

2018-03-01

Although metal nitride thin films have attractive prospects in plasmonic applications due to its stable properties in harsh environments containing high temperatures, shock, and contaminants, the effect of deposition parameters on the properties of the metallic ZrN grown on III-N semiconductors by pulse laser deposition still lacks of detailed exploration. Here we have successfully prepared metallic ZrNx films on p-GaN substrate by pulsed laser deposition in N2 ambient of various pressures at a fixed substrate temperature (475 °C). It is found that the films exhibit quite smooth surfaces and (111) preferred orientation. The X-ray photoelectron spectroscopy measurements indicate that carbon contamination can be completely removed and oxygen contamination is significantly reduced on the film surfaces after cleaning using Ar+ sputtering. The N/Zr ratio increases from 0.64 to 0.75 when the N2 pressure increases from 0.5 Pa to 3 Pa. The optical reflectivity spectra measured by the UV-vis-NIR spectrophotometer show that the ZrNx is a typical and good metallic-like material and its metallic properties can be tuned with changing the film compositions.

Band gap characterization of ternary BBi1−xNx (0≤x≤1) alloys using modified Becke–Johnson (mBJ) potential

International Nuclear Information System (INIS)

Yalcin, Battal G.

2015-01-01

The semi-local Becke–Johnson (BJ) exchange-correlation potential and its modified form proposed by Tran and Blaha have attracted a lot of interest recently because of the surprisingly accurate band gaps they can deliver for many semiconductors and insulators (e.g., sp semiconductors, noble-gas solids, and transition-metal oxides). The structural and electronic properties of ternary alloys BBi 1−x N x (0≤x≤1) in zinc-blende phase have been reported in this study. The results of the studied binary compounds (BN and BBi) and ternary alloys BBi 1−x N x structures are presented by means of density functional theory. The exchange and correlation effects are taken into account by using the generalized gradient approximation (GGA) functional of Wu and Cohen (WC) which is an improved form of the most popular Perdew–Burke–Ernzerhof (PBE). For electronic properties the modified Becke–Johnson (mBJ) potential, which is more accurate than standard semi-local LDA and PBE calculations, has been chosen. Geometric optimization has been implemented before the volume optimization calculations for all the studied alloys structure. The obtained equilibrium lattice constants of the studied binary compounds are in coincidence with experimental works. And, the variation of the lattice parameter of ternary alloys BBi 1−x N x almost perfectly matches with Vegard's law. The spin–orbit interaction (SOI) has been also considered for structural and electronic calculations and the results are compared to those of non-SOI calculations

Compartmental and dosimetric studies of anti-CD20 labelled with 188Re

International Nuclear Information System (INIS)

Kuramoto, Graciela Barrio

2016-01-01

The radioimmunotherapy (RIT) uses MAbs conjugated to radionuclides α or β - emitters, both for therapy. Your treatment is based on the irradiation and tumor destruction, preserving the normal organs as the excess radiation. Radionuclides β - emitters as 131 I, 90 Y, 188 Re 177 Lu and are useful for the development of therapeutic radiopharmaceuticals and, when coupled with MAb and Anti-CD20 it is important mainly for the treatment of non-Hodgkin's lymphomas (NHL). 188 Re (E β = 2.12 MeV; E γ = 155 keV; t1/2 = 16.9 h) is an attractive radionuclide for RIT. However, 188 Re can be obtained from a radionuclide generator of 188 W/ 188 Re, commercially available, making it convenient for use in research and for clinical routine. The CR of IPEN has a project aimed at the production of radiopharmaceutical 188 Re-Anti-CD20, where the radionuclide can be obtained from a generator system 188 W/ 188 Re. With this proposed a study to assess the efficiency of this labeling technique for treatment in accordance compartmental and dosimetry. The objective of this study was to compare the marking of anti-CD20 MAb with 188 Re with the marking of the antibody with 90 Y, 131 I, 177 Lu and 99m Tc (for their similar chemical characteristics) and 211 At, 213 Bi, 223 Ra and 225 Ac); through the study of labeling techniques reported in literature, the proposal of a compartmental model to evaluate its pharmacokinetic and dosimetric studies, high interest for therapy. The result of the study shows a favorable kinetics for 188 Re, by their physical and chemical characteristics compared to the other evaluated radionuclides. The compartment proposed study describes the metabolism of 188 Reanti- CD20 through a compartment mammillary model, which by their pharmacokinetic analysis, performed compared to products emitters β -131 I-labeled anti CD20, 177 Luanti- CD20, the γ emitter 99m Tc-Anti-CD20 and α emitter 211 At-Anti-CD20 presented a elimination constant of approximately 0.05 hours

Rhenium 188 labelling of peptide conjugates

International Nuclear Information System (INIS)

Melendez-Alafort, Laura

2001-01-01

Many human tumours express high levels, of somatostatin receptors. In order to make possible a radiotherapeutic treatment of this kind for tumour a series of somatostatin analogues that can tightly chelate beta emitting isotopes have been developed in recent years. The work carried out for this thesis has been aimed towards development of a new therapeutic radiopharmaceutical for treatment of somatostatin receptor positive tumours. The first chapters describe work with technetium-99m to establish the labelling and analytical conditions for a somatostatin analogue, [Tyr 3 ]-octreotide (TOC), as a precursor to undertaking labelling studies with the beta emitter rhenium-188. 6-Hydrazinopyridine-3-carboxylic acid (HYNIC) was conjugated to TOC and labelled with 99m using different coligands. Then the stability, receptor binding and biodistribution of each complex were assessed. 99m Tc-HYNIC-TOC using EDDA as coligand showed the best characteristics, and was superior for tumour imaging in humans than the commercially available 111 In-DTPA-octreotide. The conditions for labelling the HYNIC-TOC conjugate with 188 Re were then optimised using tricine as a co-ligand. A labelling yield of ∼80% was achieved. After purification however, the stability of the complex was low. The use of other coligand systems which had proved useful for 99m Tc labelling was explored, but yields were very poor. Other chelators such as diethylenetriamine pentaacetic acid (DTPA), dimercaptosuccinic acid (DMSA) and mercaptoacetyltriglycine (MAG 3 ) were studied as potential co-ligand agents to label the HYNIC-TOC conjugate with 188 Re but, again low yields of the labelled peptide complexes were achieved. A novel 188 Re-HYNIC complex was prepared in high yields using N-N-disubstituted dithiocarbamates as coligands. However to date, the specific activities achieved with this system are relatively low. The use of the [ 99m Tc(CO) 3 (H 2 O) 3 ] complex to label the HYNIC-TOC conjugate was investigated

Preparation of 188 Re-lanreotide as a potential tumor therapeutic agent

International Nuclear Information System (INIS)

Bai Hongsheng; Jin Xiaohai; Fan Hongqiang; Jia Bing; Wang Yuqing; Lu Weiwei

2001-01-01

Radiolabeled peptides hold unlimited potential in diagnostic applications and therapy of malignant tumor. Somatostatin analogue peptide (Lanreotide) is labeled directly with 188 Re via the mixture of citrate and tartrate. The influences of reaction conditions such as pH, temperature, amount of stannous chloride, Lanreotide quantity, reaction time on labeling yield are investigated in detail. At the same time, the stability in vitro, quality control and animal test are evaluated. The experimental results show that Lanreotide reacts with 188 Re for 40 min at pH 2 - 3 and 60 degree C, the labeling yield is at range of 88% - 94%. After purification of 188 Re-Lanreotide with Sep-Pak C 18 reverse phase extraction cartridge, the radiochemical purity (RP) is more than 95%. 188 Re-Lanreotide is eliminated rapidly from the blood and is excreted through liver, the uptake of lung and intestine is high

Microstructure and superplasticity of TA15 alloy

Energy Technology Data Exchange (ETDEWEB)

Sun, Q.J., E-mail: cruzesun@nchu.edu.cn; Wang, G.C.

2014-06-01

Superplasticity of TA15 alloy was investigated by constant strain rate tensile method in this work. In order to enhance superplasticity, thermo-mechanical techniques were applied for refining the grains of the alloy first. The superplastic tensile tests were carried out on a SANS CMT4104 electronic tensile testing machine at temperatures ranging from 780 to 950 °C and strain rates from 3.3×10{sup −4} to 1.1×10{sup −2} s{sup −1}. The tensile elongation-to-failure values between 188% and 1074% were obtained. Microstructure evolution after superplastic deformation was also analyzed by optical microscope (OM) and transmission electron microscope (TEM). The micrographs show that the grains were coarsened after deformation, and α→β phase transformation took place at 950 °C, which resulted in the worst superplasticity. Extensive strain hardening stages were observed in the true stress–strain curves due to high dense dislocations in the thermo-mechanically processed alloy and dynamic grain growth during superplastic deformation. The strain rate sensitivity m and the activation energy values at various deformation conditions were calculated, respectively. Based on an analysis of the above studies, it may be inferred that grain boundary sliding (GBS) in TA15 alloy is accommodated by grain boundary diffusion at high temperatures and low strain rates, and the accommodation process involves dislocation glide creep at low temperatures and high strain rates.

Treatment of liver cancer with Rhenium-188 Lipiodol: Colombian experience

International Nuclear Information System (INIS)

Bernal, P.; Osorio, M.; Mendoza, M.; Esguerra, R.; Ucros, G.; Gutierrez, C.; Velez, O.; Cerquera, A.M.; Padhy, A.K.

2002-01-01

Aim:Trans-arterial Radio-conjugate therapy plays an important role in the palliative treatment of inoperable liver cancer. It also helps in reduction of the tumor to an operable state from an inoperable one. As a part of an IAEA sponsored coordinated research project, a new radiopharmaceutical, Rhenium-188 Lipiodol has been developed. The aim of this study was to establish the safety of the radiopharmaceutical and to find out the efficacy of treatment. Materials and Methods: Eight patients suffering from various forms of liver cancer (Hepatocellular carcinoma-4, Metastases from carcinoma of colon-3 and Carcinoid- 1) were treated with Rhenium -188 Lipiodol. Seven out of the eight patients were classified as ECOG- 1 and one as ECOG- 3. Labelling of Rhenium-188 with Lipiodol was carried out according to a protocol developed under the CRP and standardized in our service. Rhenium-188 Lipiodol was administered through the trans-arterial route by either selective (75%) or ultra selective (25%) hepatic arteriography. Administered therapeutic doses ranged between 170 MBq and 4181 MBq. Dosimetric evaluations were made using the IAEA developed dosimetry spreadsheet. All patients were followed up (1-5 months, average = 2 months) after treatment by clinical examination, liver function tests, haematological examinations and CT scans of liver to determine the size of hepatic tumor. Results: Rhenium-188 Lipiodol treatment was well tolerated by all patients. No immediate systemic complications were noted in any of the patients within 72 hrs. following therapy. Only two patients had mild rise in temperature in the immediate post-therapy period, which subsided subsequently. One patient who was classified as Child B and ECOG 3, developed encephalopathy on the seventh day after treatment. He died of hepatic failure. Another one present depressive syndrome, didn't accept food and died Follow-up CT scans in all the surviving (6/8) patients revealed significant reduction of the tumours

MAG2GABA-biocytin synthesized with new intermediates for radiolabelling 99mTc and 188Re

International Nuclear Information System (INIS)

Ahn, S.H.; Choi, T.H.; Choi, C.W.; Yang, S.D.; Woo, K.S.; Chung, W.S.; Lim, S.M.

2001-01-01

188 Re from 188 W- 188 Re generator, is recently introduced in therapeutic nuclear medicine and made it possible to use whenever needed. We synthesized MAG 2 GABA-Biocytin (MGB), labelled with 188 Re for pretargeted radioimmunotherapy and evaluated biological behavior of 188 Re-MGB. N-hydroxysuccinimidyl ester of S-benzoyl mercaptoacetyldiglycine (NHS-MAG 2 ) was synthesized first, reacted with aminobutyric acid(GABA) to give MAG 2 GABA and then converted to NHS-MAG 2 GABA and conjugated to biocytin to give the MGB. To label MGB with 188 Re (50mA), ag, 200ml 1M tartrate pH7, 200 l stannous (10mg/mL) and 180MBq perrhenate were mixed and heated for 30min at 100 deg. C. The reactant was purified with C 18 Sep-Pak. HPLC analysis of the 188 Re-MGB performed on reverse phase C 18 column with a gradient. To see the stability, 188 Re-MGB was added to serum at 37 deg. C. Binding capacity of 188 Re-MGB to avidin or streptavidin was determined by size exclusion HPLC system. Biodistribution was studied in ICR normal mice(n=4/group), from 5min to 120min. In Raji cells tumour bearing nude mice(n=3), biotinylated Lym-1(40MEG) injection after 48 h, streptavidin(50MEG) was injected. 24 h later, 188 Re-MGB(0.5MEG) was injected, and biodistribution was observed 2 h later. 188 Re-MGB was obtained with labelling yield 98%. Stability in serum was maintained over 70% until 3 h. Binding capacity of 188 Re-MGB to streptavidin was greater than avidin. In normal mice, 188 Re-MGB was excreted via hepatobiliary pathway,%ID/g of GI tract was 52.1 at 120min. In Raji cells tumour bearing nude mice, liver and colon were higher than those of normal mouse. Tumour uptake at 120min was 0.05%ID/g. 188 Re-MGB was effectively labelled and retained binding activity with streptavidin. 188 Re-MGB may have a role in pretargeted radioimmunotherapy. (author)

Probing intruder configurations in $^{186, 188}$Pb using Coulomb excitation

CERN Multimedia

Columb excitation measurements to study the shape coexistence, mixing and quadrupole collectivity of the low-lying levels in neutron-deficient $^{188}$Pb nuclei are proposed with a view to extending similar studies to the $^{186}$Pb midshell nucleus. The HIE-ISOLDE beam of $^{186,188}$Pb nuclei will be delivered to MINIBALL+SPEDE set-up for simultaneous in-beam $\\gamma$-ray and conversion electron spectroscopy. The proposed experiment will allow the sign of the quadrupole deformation parameter to be extracted for the two lowest 2$^{+}$ states in $^{188}$Pb. Moreover, the advent of SPEDE will allow probing of the bandhead 0$^{+}$ states via direct measurements of E0 transitions. Beam development is requested to provide pure and instense $^{186}$Pb beam.

Simulation on Vehicle Vibration Offset of NX70 Flatcar

Directory of Open Access Journals (Sweden)

Han Yanhui

2014-11-01

Full Text Available The current rolling stock gauge for standard gauge railway is a static gauge to check the vehicle frame. The contradiction of large construction gauge and small rolling stock gauge has always existed. It is important to set down the clearance requirements in respect of physical size for the safe passage of rail vehicles. Reasonably determining the maximum vibration offset can improve the efficiency of clearance. As an example, analyze the complex vibration of NX70 flat car by simulation test on the running track. Comprehensive considering the track model, loading plan, line conditions and running speed, then SIMPACK is used to present the vehicle system dynamics simulation model. After researching simulation result, respectively determine the maximum vehicle vibration offset for railroads of Class I, Class II and Class III on the height of the center of gravity 2000 mm and 2400 mm. According to the clearance between the structure gauge and the position of maximum vibration offset, analyze the safety of vehicle operation since the center of gravity is higher than before.

Therapeutic applications of Rhenium-188 in nuclear medicine and oncology - Current status and expected future perspectives

International Nuclear Information System (INIS)

Knapp, F. F. Jr.

2005-01-01

Full text: The increasing use of unsealed radioactive targeting agents for cancer treatment requires the routine availability of cost-effective radioisotopes. Rhenium-188 (Re-188; half-life 16.9 hours) is a high-energy beta-emitter (E max 2.12 MeV), readily available no- max carrier-added from the alumina-based tungsten-188 (half-life 69 days)/rhenium-188 generator system. Rhenium-188 also emits a 155 keV (15%) gamma photon, permitting gamma camera imaging for biodistribution and dosimetry evaluation. The versatile chemistry of rhenium allows attachment to a wide variety of targeting molecules for Re-188 applications in nuclear oncology for both palliative metastatic treatment and targeted tumor therapy - radionuclide synovectomy, and coronary restenosis therapy. The long parent half-life and consistent performance provide an indefinite generator shelf-life of several months with high Re-188 elution yields (75-85 %) and consistently low W-188 parent breakthrough ( -6 ). Simple post-elution concentration methods have been developed which provide very high specific volume solution of Re-188 for radiolabeling (> 700 mCi/mL saline/1 Ci generator). Over 60 physician-sponsored clinical trials are currently in progress worldwide with applications in nuclear medicine, nuclear oncology and interventional cardiology. A variety of Re-188-labeled therapeutic radiopharmaceuticals and devices are being developed for clinical trials currently in progress for treatment of both benign and metastatic oncological disorders. Palliation of metastatic bone pain with Re-188-HEDP - prepared from a simple 'kit' - has been demonstrated as a cost-effective alternative to similar agents. Recent studies have in fact demonstrated the enhancement of progression-free interval and survival time by repeated Re-188-HEDP injections to patients with metastatic disease from prostate cancer. The use of the Re-188-labeled antiNCA95 (CD66) antibody in conjunction with external beam irradiation is an

Biological behavior of 188Re-biotin chelate for multistep therapy with the avidin-biotin system

International Nuclear Information System (INIS)

Choi, T. H.; Ahn, S. H.; Choi, C. W.; Woo, K. S.; Jung, W. S.; Lim, S. J.; Lim, S. M.

1999-01-01

The purpose of this study was to test the three-step targeting of tumors in mice using biotinylated antibody, streptavidin and radiolabeled biotin for radioimmunotherapy (RAIT). Three-step pretargetting can potentially decreases harmful radiation to normal tissues in radioimmunotherapy. 188 Re from 188 W- 188 Re generator, is recently introduced in therapeutic nuclear medicine and made it possible to use whenever needed. We studied biotin-chelates MGB for use in the avidin/biotin pretargetting system. Chelates that hold radiometals with high stability under physiological conditions are essential to avoid excessive radiation damage to non-target cells. We synthesized MAG 2 GABA-Biocytin (MGB), labeled with 188 Re and evaluated biological behavior of 188 Re-MGB. biotinyl MAG 2 GABA bind the therapeutic radiometal 188 Re with excellent in vitro stability and have the required physiological properties for pretargetted therapy. In normal mice, 188 Re-MGB was excreted via hepatobiliary pathway, %ID/g of GI tract was 52.1 at 120min. In Raji cells tumor bearing nude mice, liver and colon were higher than those of normal mouse. Tumor uptake at 120min was 0.05%ID/g. 188 Re-MGB may have a role in pretargetted radioimmunotherapy

Adaption of wild-bird origin H5Nx highly pathogenic avian influenza virus Clade 2.3.4.4 in vaccinated poultry

Science.gov (United States)

The 2014-2015 incursion of H5Nx clade 2.3.4.4 high pathogenicity avian influenza (HPAI) virus caused the largest animal health emergency in U.S. history and renewed interest in developing vaccines against these newly emergent viruses. Our previous research demonstrated several H5 vaccines with varyi...

Artifacts in MRI of the temporomandibular joint caused by dental alloys: a phantom study at 1.5 T

International Nuclear Information System (INIS)

Fellner, C.; Erlangen-Nuernberg Univ., Erlangen; Behr, M.; Fellner, F.; Held, P.; Handel, G.; Feuerbach, S.

1997-01-01

Purpose: The influence of dental alloys on MRI of the temporomandibular joint was studied using a phantom model for this joint. Methods: At 1,5 T, 15 dental alloys and 14 of their most important components were investigated acquiring sagittal (FOV: 150 mm) and transverse (FOV: 250 mm) T 1 -weighted SE additionally. The artifacts were assessed qualitatively as well as quantitatively, and the samples were subdivided into four artifact categories. Results: Ag, Cu, Ga, In, Ti, Sn, Zn, amalgan, the precious alloys, the Au-Pd and Ag-Pd alloys showed no artifacts (category I). Minimal artifacts below 10 mm on transverse images (category II) were found for Cr, Pd, Pt and for the Ni-Cr alloy. Mn and the remaining non-precious alloys induced artifacts up to 30 mm (category III). Significant artifacts - more than 30 mm - (category IV) were to be more susceptible for artifacts than T 1 -weighted SE and FLASH techniques. Conclusions: In contrast to dental alloys for fixed prosthodontics, Ni-Cr- or 18/8 wires used for orthodontic bands can influence not only the image quality, but also the diagnostic reliability of MRI of the temporomandibular joint. (orig.) [de

Interaction between lipid monolayers and poloxamer 188: An X-ray reflectivity and diffraction study

DEFF Research Database (Denmark)

Wu, G.H.; Majewski, J.; Ege, C.

2005-01-01

The mechanism by which poloxamer 188 (P188) seals a damaged cell membrane is examined using the lipid monolayer as a model system. X-ray reflectivity and grazing-incidence x-ray diffraction results show that at low nominal lipid density, P188, by physically occupying the available area and phase ...

EFFICACY of P188 ON LAPINE MENISCUS PRESERVATION FOLLOWING BLUNT TRAUMA

Science.gov (United States)

Coatney, Garrett A.; Abraham, Adam C.; Fischenich, Kristine M.; Button, Keith D.; Haut, Roger C.; Haut Donahue, Tammy L.

2015-01-01

Traumatic injury to the knee leads to the development of posttraumatic osteoarthritis. The objective of this study was to characterize the effects of a single intra-articular injection of a non-ionic surfactant, Poloxamer 188 (P188), in preservation of meniscal tissue following trauma through maintenance of meniscal glycosaminoglycan (GAG) content and mechanical properties. Flemish Giant rabbits were subjected to a closed knee joint, traumatic compressive impact with the joint constrained to prevent anterior tibial translation. The contralateral limb served as an un-impacted control. Six animals (treated) received an injection of P188 in phosphate buffered saline (PBS) post trauma, and another six animals (sham) received a single injection of PBS to the impacted limb. Histological analyses for GAG was determined 6 weeks post trauma, and functional outcomes were assessed using stress relaxation micro-indentation. The impacted limbs of the sham group demonstrated a significant decrease in meniscal GAG coverage compared to non-impacted limbs (p < 0.05). GAG coverage of the impacted P188 treated limbs was not significantly different than contralateral non-impacted limbs in all regions except the medial anterior (p < 0.05). No significant changes were documented in mechanics for either the sham or treated groups compared to their respective control limbs. This suggests that a single intra-articular injection of P188 shows promise in prevention of trauma induced GAG loss. PMID:25846264

46 CFR 188.10-21 - Compressed gas.

Science.gov (United States)

2010-10-01

... PROVISIONS Definition of Terms Used in This Subchapter § 188.10-21 Compressed gas. This term includes any... by the Reid method covered by the American Society for Testing Materials Method of Test for Vapor...

Labeling of MDP with {sup 188}Re for bone tumour therapy

Energy Technology Data Exchange (ETDEWEB)

Barbezan, Angelica B.; Osso Junior, Joao A., E-mail: jaosso@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2011-07-01

{sup 188}Re is one of the most attractive radioisotopes for a variety of therapeutic applications in nuclear medicine, due to its physical decay properties, such as {beta}{sup -} emission of 2.12 MeV, {gamma} emission of 155 keV and half life of 16.9 hours. Biphosphonates are potent inhibitors of osteoclastic bone resorption and are effective in several diseases that cause bone fragility and bone metastases. Because of these characteristics, labeled biphosphonates have been studied for bone pathologies, also acting as palliation of bone pain in case of metastasis.The aim of this study was to optimize the labeling of a phosphonate-MDP (Sodium Methylene Diphosphonate) with {sup 188}Re for use in bone pain palliation. {sup 188}Re was obtained by eluting a {sup 188}W-{sup 188}Re generator from POLATOM. The labeling was performed at room temperature using MDP, SnCl{sub 2} as reducing agent and ascorbic acid. The variables studied were: Mass of ligand (3, 6 and 10 mg), reducing agent mass (5, 7, 10 and 11 mg), ascorbic acid mass (1, 3, 5 and 6 mg), pH (1 and 2) and time of reaction (15, 60, 120, 360 and 4320 minutes), that also reflected the stability of the radiopharmaceutical. The radiochemical control, that also measures the labeling efficiency was evaluated by paper chromatography using Whatman 3MM paper and the solvents acetone and 0.9%NaCl. The best formulation was the following: Mass of ligand MDP: 10 mg, mass of SnCl{sub 2}: 5 mg, ascorbic acid mass: 3 mg, time of reaction: 30 minutes, pH: 1. Under optimum conditions, {sup 188}Re MDP radiolabeling yield was 98,07% and the radiopharmaceutical was stable up to 72 h. (author)

Method of spectra parametrization of (n, x) and (n, nx) reactions induced by DT-neutrons

International Nuclear Information System (INIS)

Aleksandrov, D.V.; Kovrigin, B.S.

1980-01-01

A method for parmetrization of experimental spectra has been developed for more convenient carrying out a process of separating competing mechanisms contributions in spectra of the (n, x) and (n, nx) reactions induced with DT neutrons. Differential cross sections of competing partial processes are used. as expanding coefficients. Model spectra may be represented in the form of tabulated-given functions calculated separately from formulae of any complexity degree. Fit of model expressions is performed by the least square method (lsm). Step-by-step algorithm of nonlinear optimization is used for search for lsm- evaluations of theoretical models parameters [ru

Study of radiation synovectomy using 188Re-sulfide in hemophilic arthritis

International Nuclear Information System (INIS)

Li, P.Y.; Cheng, G.; Jiang, X.F.; Wang, X.F.; Shen, Z.M.; Zhang, Z.H.

2002-01-01

Purpose: Based on results of previous animal studies, the efficacy of 188 Re-sulfide on radiation synovectomy in hemophilia synovitis.was evaluated. Material and Methods: 188 Re-sulfide suspension was produced by dispersion method. 25 hemophilic patients with 30 synovitic joints including 22 knees and 8 ankles received the radiation synovectomy. The stage of synovitic joint was classified by joint score including the pain, stability and range of motion and MR score. The doses of 188 Re-sulfide injected into knee and ankle were determined as 12mCi and 6mCi respectively, according to the depth and curve and the results of our previous animal study. To exam the distribution of 188 Re-sulfide in vivo after the injection, a whole-body scan was taken 24 and 48 hours later to calculate the retention of 188 Re-sulfide in joint by percentage of join counts in whole body. The follow up was take place at 6-12 months after the synovectomy by joint score, MRI score, synovial structure, the times and interval of hemorrhage of the joints. Results: Few patients complained discomfort after the injection such as hurt of the superficial tissues around the injected point and swelling (2 patients,.8%).The symptoms in this two patients continued up to 3 days and gradually decreased in severity. All patients felt relief of the pain and swelling in joints. 90% joints including 20 knees and 7 ankles did not bleed any more during the 3-month term of follow up, 3 joints from 2 patients with intra-article bleeding had hemorrhage in one month after long distance walk. 16%(5/30) of joints including 4 knees and 1 ankles had recurrent hemorrhage in 12 months after the radiation synovectomy. However, their interval of intra-article bleeding was prolonged MRI showed the thick synovium became thin, villi reduced and the joint edema relieved. The retention of 188 Re-sulfide in administrated joint was more than 95% until 48 hours later. No any sign of radioactive distribution was found in bone marrow

Computational study of GaAs1-xNx and GaN1-yAsy alloys and arsenic impurities in GaN

International Nuclear Information System (INIS)

Laaksonen, K; Komsa, H-P; Arola, E; Rantala, T T; Nieminen, R M

2006-01-01

We have studied the structural and electronic properties of As-rich GaAs 1-x N x and N-rich GaN 1-y As y alloys in a large composition range using first-principles methods. We have systematically investigated the effect of the impurity atom configuration near both GaAs and GaN sides of the concentration range on the total energies, lattice constants and bandgaps. The N (As) atoms, replacing substitutionally As (N) atoms in GaAs (GaN), cause the surrounding Ga atoms to relax inwards (outwards), making the Ga-N (Ga-As) bond length about 15% shorter (longer) than the corresponding Ga-As (Ga-N) bond length in GaAs (GaN). The total energies of the relaxed alloy supercells and the bandgaps experience large fluctuations within different configurations and these fluctuations grow stronger if the impurity concentration is increased. Substituting As atoms with N in GaAs induces modifications near the conduction band minimum, while substituting N atoms with As in GaN modifies the states near the valence band maximum. Both lead to bandgap reduction, which is at first rapid but later slows down. The relative size of the fluctuations is much larger in the case of GaAs 1-x N x alloys. We have also looked into the question of which substitutional site (Ga or N) As occupies in GaN. We find that under Ga-rich conditions arsenic prefers the substitutional N site over the Ga site within a large range of Fermi level values

Investigations of labeling insulin-like growth factor-1 analogue with 188Re

International Nuclear Information System (INIS)

Zhang Bin; Wu Yiwei; Fan Wo

2007-01-01

Objective: To establish a stable method for labeling insulin-like growth factor-1 analogue (IGF-1A) with 188 Re. Methods: The directly labeling method was adopted. Several labeling conditions were tested, such as the volume of Tween-80, the concentration of SnCl 2 ·2H 2 O, the amount of IGF-1A, and the volume of 188 Re perrhenate. The labeling efficiency was determined from 15 min to 8 h after labeling. The in vitro stability of 188 Re-IGF-1A was analyzed by using human serum or sodium chloride as challenging agent, and the labeling efficiency was determined from 2 to 24 h after added challenging agent. Results: The optimum labeling conditions were 10 μl 0.1% Tween-80, 100 μl SnCl 2 · 2H 2 O (10 mg/ml), 50 μl IGF-1A (2 mg/ml), and 50 μl 188 Re perrhenate, incubated 30 min at room temperature. The labeling efficiency of 188 Re-IGF-1A could reach (94.07 ± 0.32)% and the amount of radiocolloid was (5.50 ± 1.50)%. It was (89.07 ± 0.74)% after incubation for 6 h at room temperature, and was (76.57 ± 9.96)% after incubation for 24 h with human serum. Conclusion: This method of labeling IGF- 1A with 188 Re using SnCl 2 ·2H 2 O is stable and high labeling efficiency can be obtained. (authors)

Absolute Transition Rates in {sup 188}lr

Energy Technology Data Exchange (ETDEWEB)

Malmskog, S G; Berg, V

1969-09-15

Half-lives of several excited levels in {sup 188}lr have been measured using an electron-electron delayed coincidence spectrometer. Active {sup 188}Pt sources were prepared from spallation products using the ISOLDE on-line mass separator facility at CERN. The following half-lives were obtained: T{sub 1/2} (54.8 keV level) = (1.93 {+-} 0.10) nsec; T{sub 1/2} (96.7 keV level) = (0.59 {+-} 0.12) nsec; T{sub 1/2} (187.6 keV level) = (0.056 {+-} 0.013) nsec; T{sub 1/2} (195.1 keV level) = (0.051 {+-} 0.010) nsec; T{sub 1/2} (478. 3 keV level) {<=} 0.15 nsec The 54.8 keV transition was found to have an enhanced E2 transition probability indicating a collective character for this transition.

β-radiation exposure with 188Re-labelled pharmaceuticals

International Nuclear Information System (INIS)

Andreeff, M.; Wunderlich, G.; Kotzerke, J.; Behge, K.; Schoenmuth, Th.

2005-01-01

Aim: The number of therapies with radiopharmaceuticals labelled with 188 Re is increasing requiring the documentation of the beta radiation exposure Hp(0.07) of the staff at all working and production sites and during the application and follow-up of the patient according to the new German Radiation Protection Law (StrlSchV). However, data for β-radiation exposure are rare. Therefore, we determined the personal dose Hp(0.07) of the skin of the hands handling 188 Re radiopharmaceuticals to identify steps of high radiation exposure and to optimize working conditions. Method: Thermoluminescence dosimeters (TLD 100) were fixed to the fingertips of the radiochemist, the physician and the nurse and compared to official ring dosimeters. In addition, to monitor radiation exposure continuously readable electronic beta- and gamma dosimeters EPD (Siemens) were used. At eight days in which therapies were performed these readings were evaluated. Results: Considering one therapy with a 188 Re-labelled radiopharmaceutical the middle finger of the radiochemist (production) and the physician (application) showed a radiation burden of 894 and 664 μSv/GBq, respectively. The cumulative dose of the fingertips after eight days of therapy was 249 and 110 mSv for the radiochemist and physician, respectively. A cumulative finger dose after eight days of therapy of 17 and 39 μSv/GBq was found for physician and nurse leading to a Hp(0.07) of 3 and 6 mSv, respectively. Preparing the radiopharmaceutical labelled with 20 GBq of 188 Re the reading of the personal electronic dosimeter of the radiochemist showed a γ-dose rate Hp(10) of 55 μSv/h and a β-dose rate Hp(0.07) of 663 μSv/h which are obviously not representative for the true radiation dose to the skin of the fingertips. Conclusion: During therapy with 188 Re-labelled radiopharmaceuticals the true radiation dose to the skin of the finger tips exceeds by far the readings of the official ring dosimeters as well as the continuously

188Re-loaded lipid nanocapsules as a promising radiopharmaceutical carrier for internal radiotherapy of malignant gliomas

International Nuclear Information System (INIS)

Allard, E.; Hindre, F.; Passirani, C.; Lemaire, L.; Benoit, J.P.; Lepareur, N.; Noiret, N.; Menei, P.

2008-01-01

Lipid nanocapsules (LNC) entrapping lipophilic complexes of 188 Re( 188 Re(S 3 CPh) 2 (S 2 CPh) [ 188 Re-SSS]) were investigated as a novel radiopharmaceutical carrier for internal radiation therapy of malignant gliomas. The present study was designed to evaluate the efficacy of intra-cerebral administration of 188 Re-SSS LNC by means of convection-enhanced delivery (CED) on a 9L rat brain tumour model. Female Fischer rats with 9L glioma were treated with a single injection of 188 Re-SSS LNC by CED 6days after cell implantation. Rats were put into random groups according to the dose infused: 12, 10, 8 and 3Gy in comparison with blank LNC, perrhenate solution (4Gy) and non-treated animals. The radionuclide brain retention level was evaluated by measuring 188 Re elimination in faeces and urine over 72h after the CED injection. The therapeutic effect of 188 Re-SSS LNC was assessed based on animal survival. CED of 188 Re perrhenate solution resulted in rapid drug clearance with a brain T 1/2 of 7h. In contrast, when administered in LNC, 188 Re tissue retention was greatly prolonged, with only 10% of the injected dose being eliminated at 72h. Rat median survival was significantly improved for the group treated with 8Gy 188 Re-SSS LNC compared to the control group and blank LNC-treated animals. The increase in the median survival time was about 80% compared to the control group; 33% of the animals were long-term survivors. The dose of 8Gy proved to be a very effective dose, between toxic (10-12Gy) and ineffective (3-4Gy) doses. These findings show that CED of 188 Re-loaded LNC is a safe and potent anti-tumour system for treating malignant gliomas. Our data are the first to show the in vivo efficacy of 188 Re internal radiotherapy for the treatment of brain malignancy. (orig.)

The filamentary nebulae S 188

International Nuclear Information System (INIS)

Rosado, M.; Kwitter, K.B.

1982-01-01

The crescent shaped nebula S 188 is identified as a planetary nebula (PN) of Peimbert's Type I on the basis of its observed nebula spectrum. New FP interferometric work allows to determine the systemic motion of this nebula. The derived kinematical distance exceeds Cudworth's distance estimate supporting the idea that Peimbert's Type I PNs have larger ejected masses than typical PNs. A discussion about the origin of its non-spherical shape is also given. (author)

Safety and Efficacy of 188-Rhenium-Labeled Antibody to Melanin in Patients with Metastatic Melanoma

Directory of Open Access Journals (Sweden)

M. Klein

2013-01-01

Full Text Available There is a need for effective “broad spectrum” therapies for metastatic melanoma which would be suitable for all patients. The objectives of Phase Ia/Ib studies were to evaluate the safety, pharmacokinetics, dosimetry, and antitumor activity of 188Re-6D2, a 188-Rhenium-labeled antibody to melanin. Stage IIIC/IV metastatic melanoma (MM patients who failed standard therapies were enrolled in both studies. In Phase Ia, 10 mCi 188Re-6D2 were given while unlabeled antibody preload was escalated. In Phase Ib, the dose of 188Re-6D2 was escalated to 54 mCi. SPECT/CT revealed 188Re-6D2 uptake in melanoma metastases. The mean effective half-life of 188Re-6D2 was 12.4 h. Transient HAMA was observed in 9 patients. Six patients met the RECIST criteria for stable disease at 6 weeks. Two patients had durable disease stabilization for 14 weeks and one for 22 weeks. Median overall survival was 13 months with no dose-limiting toxicities. The data demonstrate that 188Re-6D2 was well tolerated, localized in melanoma metastases, and had antitumor activity, thus warranting its further investigation in patients with metastatic melanoma.

Compartmental and dosimetric studies of anti-CD20 labeled with 188Re

International Nuclear Information System (INIS)

Barrio Kuramoto Graciela; Mie Nakamura Matsuda Margareth; Osso Joao Jr, Alberto

2016-01-01

Radioimmunotherapy has the potential to deliver lethal radiation energy directly to malignant cells via targeting of radioisotope-conjugated monoclonal antibodies (MAbs) to specific antigens. Rituximab (RTX) is specifically targeted against CD20, a surface antigen expressed by B-lymphocytes. The use of 188 Re from a 188 W/ 188 Re generator system represents an alternative radionuclide for therapy. Rhenium has chemical properties similar to technetium and both can be conjugated to antibodies using similar chemistry methods. The objective of this work is to prove the usefulness of this radiopharmaceutical based on dosimetric and pharmacokinetic studies that are also required by the Brazilian Regulatory Agency. (author)

Surface passivation at low temperature of p- and n-type silicon wafers using a double layer a-Si:H/SiNx:H

International Nuclear Information System (INIS)

Focsa, A.; Slaoui, A.; Charifi, H.; Stoquert, J.P.; Roques, S.

2009-01-01

Surface passivation of bare silicon or emitter region is of great importance towards high efficiency solar cells. Nowadays, this is usually accomplished by depositing an hydrogenated amorphous silicon nitride (a-SiNx:H) layer on n + p structures that serves also as an excellent antireflection layer. On the other hand, surface passivation of p-type silicon is better assured by an hydrogenated amorphous silicon (a-Si:H) layer but suffers from optical properties. In this paper, we reported the surface passivation of p-type and n-type silicon wafers by using an a-Si:H/SiNx:H double layer formed at low temperature (50-400 deg. C) with ECR-PECVD technique. We first investigated the optical properties (refraction index, reflectance, and absorbance) and structural properties by FTIR (bonds Si-H, N-H) of the deposited films. The hydrogen content in the layers was determined by elastic recoil detection analysis (ERDA). The passivation effect was monitored by measuring the minority carrier effective lifetime vs. different parameters such as deposition temperature and amorphous silicon layer thickness. We have found that a 10-15 nm a-Si film with an 86 nm thick SiN layer provides an optimum of the minority carriers' lifetime. It increases from an initial value of about 50-70 μs for a-Si:H to about 760 and 800 μs for a-Si:H/SiNx:H on Cz-pSi and FZ-nSi, respectively, at an injection level 2 x 10 15 cm -3 . The effective surface recombination velocity, S eff , for passivated double layer on n-type FZ Si reached 11 cm/s and for FZ-pSi-14 cm/s, and for Cz-pSi-16-20 cm/s. Effect of hydrogen in the passivation process is discussed.

188Re radiopharmaceuticals for radiosynovectomy: evaluation and comparison of tin colloid, hydroxyapatite and tin-ferric hydroxide macroaggregates

International Nuclear Information System (INIS)

Savio, Eduardo; Ures, María Cristina; Zeledón, Patricia; Trindade, Victoria; Paolino, Andrea; Mockford, Virginia; Malanga, Antonio; Fernández, Marcelo; Gaudiano, Javier

2004-01-01

Radiosynovectomy is a therapy used to relieve pain and inflammation from rheumatoid arthritis and related diseases. In this study three 188 Re particulate compounds were characterized according to their physico-chemical properties and their biological behavior in rabbits. The results were compared in order to establish which was the radiopharmaceutical that better fits the requirements of this kind of radiotherapy. Three radiopharmaceutical formulations, tin colloid, hydroxyapatite particles (HA) and ferric hydroxide macroaggregates coated with tin colloid (FHMA), were physically characterized (number, volume and surface of the particles). For this purpose laser diffraction methodology was used. To evaluate cavity leakage of activity the following studies in New Zealand rabbits were performed: scintigraphic images for 48 hr after intraarticular injection of each radiopharmaceutical, biodistribution at 48 hr and urine samples collection during the first 24 hr post-radiopharmaceutical administration. Labeling procedures for 188 Re-HA and 188 Re-Sn-FHMA were labour intensive while 188 Re-Sn was easily prepared. Furthermore, 188 Re-Sn colloid offered the greatest surface area in the 2–10 microm range and was obtained with a radiochemical purity over 95%, while percentage of bound activity for 188 Re-HA and 188 Re-Sn-FHMA were 55% and 92% respectively. Stability was verified for the three radiopharmaceuticals for 24 hr. Scintigraphic studies and biodistribution in rabbits after intraarticular administration of the radiopharmaceuticals showed relevant activity only in the knee, this being over 90% of the residual activity in the whole body at 48 hr in every case. Renal elimination of 188 Re-Sn colloid and 188 Re-Sn-FHMA was detected by activity measurements in urine samples, during the first 12 hr post-radiopharmaceutical injection. The percentage of activity retained in the knee was 69.1% for 188 Re-Sn colloid, 55.1% for 188 Re-Sn-FHMA and 33.6% for 188 Re-HA. The 188

46 CFR 188.10-56 - Pilot boarding equipment and point of access.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Pilot boarding equipment and point of access. 188.10-56... VESSELS GENERAL PROVISIONS Definition of Terms Used in This Subchapter § 188.10-56 Pilot boarding equipment and point of access. (a) Pilot boarding equipment means a pilot ladder, accomodation ladder, pilot...

Synthesis, characterization and biological evaluation of [{sup 188}Re(N)(cys{approx})(PNP)]{sup +/0} mixed-ligand complexes as prototypes for the development of {sup 188}Re(N)-based target-specific radiopharmaceuticals

Energy Technology Data Exchange (ETDEWEB)

Thieme, Stefan [Institute of Radiopharmacy, Forschungszentrum Dresden Rossendorf, P.O. Box 510 119, 01314 Dresden (Germany); Agostini, Stefania [Department of Pharmaceutical Sciences, University of Padua, Via Marzolo 5, 35131 Padova (Italy); Bergmann, Ralf; Pietzsch, Jens; Pietzsch, Hans-Juergen [Institute of Radiopharmacy, Forschungszentrum Dresden Rossendorf, P.O. Box 510 119, 01314 Dresden (Germany); Carta, Davide; Salvarese, Nicola [Department of Pharmaceutical Sciences, University of Padua, Via Marzolo 5, 35131 Padova (Italy); Refosco, Fiorenzo [ICIS-CNR, Corso Stati Uniti 4, 35127 Padova (Italy); Bolzati, Cristina, E-mail: bolzati@icis.cnr.i [Department of Pharmaceutical Sciences, University of Padua, Via Marzolo 5, 35131 Padova (Italy); ICIS-CNR, Corso Stati Uniti 4, 35127 Padova (Italy)

2011-04-15

We report on an efficient procedure for the preparation of [{sup 188}Re(N)(PNP)]-based complexes (where PNP is diphosphinoamine) useful in the development of target-specific radiopharmaceuticals. The radiochemical yield of the compounds was optimized considering such reaction parameters as nature of the nitrido nitrogen donor, reaction times and pH level. The chemical identity of the {sup 188}Re agents was determined by high-performance liquid chromatography comparison with the corresponding well-characterized cold Re compounds. {sup 188}Re(N) mixed compounds have been evaluated with regard to stability toward transchelation with GSH and degradation by serum enzymes. The clearance of selected radiocompounds from normal tissues and their in vivo stability were evaluated in rats by biodistribution and imaging studies. [{sup 188}Re(N)(cys{approx})(PNP)]{sup +/0} mixed-ligand compounds were efficiently prepared in aqueous solution from perrhenate using a multistep procedure based on the preliminary formation of the labile {sup 188}Re{sup III}-EDTA species, which easily undergo oxidation/ligand exchange reaction to afford the [{sup 188}Re{sup V{identical_to}}N]{sup 2+} core in the presence of dithiocarbazate. The final mixed-ligand compounds were obtained, at 100{sup o}C, by adding the two bidentate ligands to the buffered [{sup 188}Re{sup V{identical_to}}N]{sup 2+} solution (pH 3.2-3.6). However, a relatively high amount of cys{approx} ligand was required to obtain a quantitative radiochemical yield. The complexes were stable toward reoxidation to perrhenate and ligand exchange reactions. In vivo studies showed rapid distribution and elimination of the complexes from the body. No specific uptakes in sensitive tissues/organs were detected. A positive correlation of the distribution of the complexes estimated with biodistribution studies (%ID) and with micro-SPECT semiquantification imaging analysis (standard uptake values) was observed. These results support the

Development of Jerusalem artichoke resource for efficient one-step fermentation of poly-(γ-glutamic acid) using a novel strain Bacillus amyloliquefaciens NX-2S.

Science.gov (United States)

Qiu, Yibin; Sha, Yuanyuan; Zhang, Yatao; Xu, Zongqi; Li, Sha; Lei, Peng; Xu, Zheng; Feng, Xiaohai; Xu, Hong

2017-09-01

This study aimed to develop non-food fermentation for the cost-effective production of poly-(γ-glutamic acid) (γ-PGA) using a novel strain of Bacillus amyloliquefaciens NX-2S. The new isolate assimilated inulin more efficiently than other carbohydrates from Jerusalem artichoke, without hydrolytic treatment. To investigate the effect of inulin on γ-PGA production, the transcript levels of γ-PGA synthetase genes (pgsB, pgsC, pgsA), regulatory genes (comA, degQ, degS), and the glutamic acid biosynthesis gene (glnA) were analyzed; inulin addition upregulated these key genes. Without exogenous glutamate, strain NX-2S could produce 6.85±0.22g/L of γ-PGA during fermentation. Exogenous glutamate greatly enhances the γ-PGA yield (39.4±0.38g/L) and productivity (0.43±0.05g/L/h) in batch fermentation. Our study revealed a potential method of non-food fermentation to produce high-value products. Copyright © 2017. Published by Elsevier Ltd.

Mechanism investigation for poloxamer 188 raw material variation in cell culture.

Science.gov (United States)

Peng, Haofan; Ali, Amr; Lanan, Maureen; Hughes, Erik; Wiltberger, Kelly; Guan, Bing; Prajapati, Shashi; Hu, Weiwei

2016-05-01

Variability in poloxamer 188 (P188) raw material, which is routinely used in cell culture media to protect cells from hydrodynamic forces, plays an important role in the process performance. Even though tremendous efforts have been spent to understand the mechanism of poloxamer's protection, the root cause for lot-to-lot variation was not clear. A recent study reported that the low performance was not due to toxicity but inefficiency to protect cells (Peng et al., Biotechnol Prog. 2014;30:1411-1418). In this study, it was demonstrated for the first time that the addition of other surfactants even at a very low level can interfere with P188 resulting in a loss of efficiency. It was also found that the performance of P188 lots correlated well with its foam stability. Foam generated from low performing lots in baffled shaker flask lasts longer, which suggests that the components in the foam layers are different. The spiking of foam generated from a low performing lot into the media containing a high performance lot resulted in cell damage and low growth. Analytical studies using size exclusion chromatography (SEC) identified differences in high molecular weight (HMW) species present in the P188 lots. These differences are much clearer when comparing the HMW region of the SEC chromatogram of foam vs. bulk liquid samples. This study shows that low performing lots have enriched HMW species in foam samples due to high hydrophobicity, which can be potentially used as a screening assay. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:767-775, 2016. © 2016 American Institute of Chemical Engineers.

Research on Rigid Body Motion Tracing in Space based on NX MCD

Science.gov (United States)

Wang, Junjie; Dai, Chunxiang; Shi, Karen; Qin, Rongkang

2018-03-01

In the use of MCD (Mechatronics Concept Designer) which is a module belong to SIEMENS Ltd industrial design software UG (Unigraphics NX), user can define rigid body and kinematic joint to make objects move according to the existing plan in simulation. At this stage, user may have the desire to see the path of some points in the moving object intuitively. In response to this requirement, this paper will compute the pose through the transformation matrix which can be available from the solver engine, and then fit these sampling points through B-spline curve. Meanwhile, combined with the actual constraints of rigid bodies, the traditional equal interval sampling strategy was optimized. The result shown that this method could satisfy the demand and make up for the deficiency in traditional sampling method. User can still edit and model on this 3D curve. Expected result has been achieved.

tavgU_2d_flx_Nx: MERRA 2D IAU Diagnostic, Surface Fluxes, Diurnal 0.667 x 0.5 degree V5.2.0 (MATUNXFLX) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATUNXFLX or tavgU_2d_flx_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface turbulence flux diagnostic that is time averaged...

Hydrogen Permeation, and Mechanical and Tribological Behavior, of CrNx Coatings Deposited at Various Bias Voltages on IN718 by Direct Current Reactive Sputtering

Directory of Open Access Journals (Sweden)

Egor B. Kashkarov

2018-02-01

Full Text Available In the current work, the microstructure, hydrogen permeability, and properties of chromium nitride (CrNx thin films deposited on the Inconel 718 superalloy using direct current reactive sputtering are investigated. The influence of the substrate bias voltage on the crystal structure, mechanical, and tribological properties before and after hydrogen exposure was studied. It was found that increasing the substrate bias voltage leads to densification of the coating. X-ray diffraction (XRD results reveal a change from mixed fcc-CrN + hcp-Cr2N to the approximately stoichiometric hcp-Cr2N phase with increasing substrate bias confirmed by wavelength-dispersive X-ray spectroscopy (WDS. The texture coefficients of (113, (110, and (111 planes vary significantly with increasing substrate bias voltage. The hydrogen permeability was measured by gas-phase hydrogenation. The CrN coating deposited at 60 V with mixed c-CrN and (113 textured hcp-Cr2N phases exhibits the lowest hydrogen absorption at 873 K. It is suggested that the crystal orientation is only one parameter influencing the permeation resistance of the CrNx coating together with the film structure, the presence of mixing phases, and the packing density of the structure. After hydrogenation, the hardness increased for all coatings, which could be related to the formation of a Cr2O3 oxide film on the surface, as well as the defect formation after hydrogen loading. Tribological tests reveal that hydrogenation leads to a decrease of the friction coefficient by up to 40%. The lowest value of 0.25 ± 0.02 was reached for the CrNx coating deposited at 60 V after hydrogenation.

Hydrogen loss and its improved retention in hydrogen plasma treated a-SiNx:H films: ERDA study with 100 MeV Ag7+ ions

Science.gov (United States)

Bommali, R. K.; Ghosh, S.; Khan, S. A.; Srivastava, P.

2018-05-01

Hydrogen loss from a-SiNx:H films under irradiation with 100 MeV Ag7+ ions using elastic recoil detection analysis (ERDA) experiment is reported. The results are explained under the basic assumptions of the molecular recombination model. The ERDA hydrogen concentration profiles are composed of two distinct hydrogen desorption processes, limited by rapid molecular diffusion in the initial stages of irradiation, and as the fluence progresses a slow process limited by diffusion of atomic hydrogen takes over. Which of the aforesaid processes dominates, is determined by the continuously evolving Hydrogen concentration within the films. The first process dominates when the H content is high, and as the H concentration falls below a certain threshold (Hcritical) the irradiation generated H radicals have to diffuse through larger distances before recombining to form H2, thereby significantly bringing down the hydrogen evolution rate. The ERDA measurements were also carried out for films treated with low temperature (300 °C) hydrogen plasma annealing (HPA). The HPA treated films show a clear increase in Hcritical value, thus indicating an improved diffusion of atomic hydrogen, resulting from healing of weak bonds and passivation of dangling bonds. Further, upon HPA films show a significantly higher H concentration relative to the as-deposited films, at advanced fluences. These results indicate the potential of HPA towards improved H retention in a-SiNx:H films. The study distinguishes clearly the presence of two diffusion processes in a-SiNx:H whose diffusion rates differ by an order of magnitude, with atomic hydrogen not being able to diffuse further beyond ∼ 1 nm from the point of its creation.

tavgM_2d_ocn_Nx: MERRA 2D IAU Ocean Surface Diagnostic, Diurnal 0.667 x 0.5 degree V5.2.0 (MATUNXOCN) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATUNXOCN or tavgU_2d_ocn_Nx data product is the MERRA Data Assimilation System 2-Dimensional ocean surface single-level diagnostics that is monthly mean...

In vivo examination of {sup 188}Re(I)-tricarbonyl-labeled trastuzumab to target HER2-overexpressing breast cancer

Energy Technology Data Exchange (ETDEWEB)

Chen, K.-T. [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Lee, T.-W. [Institute of Nuclear Energy Research, Longtan 32546, Taiwan (China); Lo, Jem-Mau [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Institute of Nuclear Engineering and Science, National Tsing Hua University, Hsinchu 30013, Taiwan (China)], E-mail: jmlo@mx.nthu.edu.tw

2009-05-15

Introduction: Trastuzumab (Herceptin), a humanized IgG1 monoclonal antibody directed against the extracellular domain of the HER2 protein, acts as an immunotherapeutic agent for HER2-overexpressing human breast cancers. Radiolabeled trastuzumab with {beta}- or {alpha} emitters can be used as radioimmunotherapeutic agent for the similar purpose but with additional radiation effect. Methods: In this study, trastuzumab was labeled with {sup 188}Re for radioimmunotherapy of HER2/neu-positive breast cancer. {sup 188}Re(I)-tricarbonyl ion, [{sup 188}Re(OH{sub 2}){sub 3}(CO){sub 3}]{sup +}, was employed as a precursor for directly labeling the monoclonal antibody with {sup 188}Re. The immunoreactivity of {sup 188}Re(I)-trastuzumab was estimated by competition receptor-binding assay using HER2/neu-overexpressive BT-474 human breast cancer cells. The localization properties of {sup 188}Re(I)-trastuzumab within both tumor and normal tissues of athymic mice bearing BT-474 human breast cancer xenografts (HER2/neu-overexpressive) and similar mice bearing MCF-7 human breast cancer xenografts (HER2/neu-low expressive) were investigated. Results: When incubated with human serum albumin and histidine at 25{sup o}C, {sup 188}Re(I)-trastuzumab was found to be stable within 24 h. The IC{sub 50} of {sup 188}Re(I)-trastuzumab was found to be 22.63{+-}4.57 nM. {sup 188}Re(I)-trastuzumab was shown to accumulate specifically in BT-474 tumor tissue in in vivo biodistribution studies. By microSPECT/CT, the image of {sup 188}Re localized BT-474 tumor was clearly visualized within 24 h. In contrast, {sup 188}Re(I)-trastuzumab uptake in HER2-low-expressing MCF-7 tumor was minimal, and the {sup 188}Re image at the localization of the tumor was dim. Conclusion: These results reveal that {sup 188}Re(I)-trastuzumab could be an appropriate radioimmunotherapeutic agent for the treatment of HER2/neu-overexpressing cancers.

Nuclear spin of 185Au and hyperfine structure of 188Au

International Nuclear Information System (INIS)

Ekstroem, C.; Ingelman, S.; Wannberg, G.

1977-03-01

The nuclear spin of 185 Au, I = 5/2, and the hyperfine separation of 188 Au, Δγ = +- 2992(30) MHz, have been measured with the atomic-beam magnetic resonance method. The spin of 185 Au indicates a deformed nuclear shape in the ground state. The small magnetic moment of 188 Au is close in value to those of the heavier I = 1 gold isotopes 190 192 194 Au, being located in a typical transition region. (Auth.)

188Re-Labeled Nimotuzumab in the Locoregional Treatment of Malignant Gliomas

International Nuclear Information System (INIS)

Montana, R. Leyva; Barrabi, M. Zamora; Casaco, A.; Torres, L.; Perera, A.; Lopez, G.

2009-01-01

A new formulation of 188 Re-Nimotuzumab was developed to evaluate the biodistribution, internal radiation dosimetry and safety in the locoregional treatment of malignant gliomas. A phase I clinical trial was performed to evaluate the toxicity and clinical effect of an intracavitary administration of single dose of Nimotuzumab labeled with 188 Re. Nimotuzumab is a humanized monoclonal antibody directed against epidermal growth factor receptors. Nine patients with anaplastic astrocytoma or glioblastoma multiforme were intended to be treated with 3 mg of mAb labeled with 10 or 15 mCi of 188 Re. The radioimmunoconjugated showed a high retention in the surgical created resection cavity and the brain adjacent tissues with a mean value of 85.5% of the injected dose one hour post- administration. No patient developed human anti-mouse antibody response. This radioimmunoconjugate may be relatively safe and a promising therapeutic approach for treating high grade gliomas. (author)

Chronic Dosing with Membrane Sealant Poloxamer 188 NF Improves Respiratory Dysfunction in Dystrophic Mdx and Mdx/Utrophin-/- Mice.

Directory of Open Access Journals (Sweden)

Bruce E Markham

Full Text Available Poloxamer 188 NF (national formulary (NF grade of P-188 improves cardiac muscle function in the mdx mouse and golden retriever muscular dystrophy models. However in vivo effects on skeletal muscle have not been reported. We postulated that P-188 NF might protect diaphragm muscle membranes from contraction-induced injury in mdx and mdx/utrophin-/- (dko muscular dystrophy models. In the first study 7-month old mdx mice were treated for 22 weeks with subcutaneous (s.c. injections of saline or P-188 NF at 3 mg/Kg. In the second, dkos were treated with saline or P-188 NF (1 mg/Kg for 8 weeks beginning at age 3 weeks. Prednisone was the positive control in both studies. Respiratory function was monitored using unrestrained whole body plethysmography. P-188 NF treatment affected several respiratory parameters including tidal volume/BW and minute volume/BW in mdx mice. In the more severe dko model, P-188 NF (1 mg/Kg significantly slowed the decline in multiple respiratory parameters compared with saline-treated dko mice. Prednisone's effects were similar to those seen with P-188 NF. Diaphragms from P-188 NF or prednisone treated mdx and dko mice showed signs of muscle fiber protection including less centralized nuclei, less variation in fiber size, greater fiber density, and exhibited a decreased amount of collagen deposition. P-188 NF at 3 mg/Kg s.c. also improved parameters of systolic and diastolic function in mdx mouse hearts. These results suggest that P-188 NF may be useful in treating respiratory and cardiac dysfunction, the leading causes of death in Duchenne muscular dystrophy patients.

Surface passivation by Al2O3 and a-SiNx: H films deposited on wet-chemically conditioned Si surfaces

NARCIS (Netherlands)

Bordihn, S.; Mertens, V.; Engelhart, P.; Kersten, K.; Mandoc, M.M.; Müller, J.W.; Kessels, W.M.M.

2012-01-01

The surface passivation of p- and n-type silicon by different chemically grown SiO2 films (prepared by HNO3, H2SO4/H2O2 and HCl/H2O2 treatments) was investigated after PECVD of a-SiNx:H and ALD of Al2O3 capping films. The wet chemically grown SiO2 films were compared to thermally grown SiO2 and the

Improved conditions for labeling EDTMP with 188Re for bone pain palliation

International Nuclear Information System (INIS)

Faintuch, B.L.; Osso, J.A. Jr.; Muramoto, E.; Faintuch, S.

2002-01-01

Introduction: Ethilenediamine tetramethylene phosphonate (EDTMP) is a tetraphosphonate ligand which, when labeled with 188 Re, can be used for relief of metastatic bone pain. The preferential localization of phosphonate complexes in bone is attributed to their affinity for calcium, and tetraphosphonates may be equal or superior to diphosphonates in this regard. In the present study, it was aimed to determine optimal conditions for preparation of a kit of EDTMP to be labeled with 188 Re. Methods: EDTMP was dissolved in NaOH 1N, and alkalinity was reversed with HCl till pH 2, when SnCl 2 . 2H 2 0 and also ascorbic acid were introduced in the mixture, followed by Na 188 ReO 4 . The preparation was incubated in water bath for 30 minutes and after cooling radiochemical purity was assessed. Optimization of the process consisted in varying the values of EDTMP mass (20, 30, 40 mg) SnCl 2 .2H 2 0 concentration (0.5, 1.0, 2.0 and 3.0 mg/mL), and reaction time (15 and 30 minutes). Radiochemical purity and stability were ascertained in vitro and also in Swiss mice. Bone/muscle uptake ratio was calculated from %ID/g of these organs. Results: The best 188 Re-EDTMP complex was obtained with 40 mg of the ligand and 2 mg/mL of stannous chloride heated during 15 minutes, and the product was radiochemically stable during 24 hours. Kidney and bone uptake were very significant (respectively 4.5 ± 0.5% and 3.1 ± 0.3 %ID/g). Bone/muscle ratio observed four hours post-injection was also very adequate (28.5). Conclusions: A stable and biologically useful complex of 188 Re-EDTMP can be prepared with high concentration of EDTMP and considerable uptake by bone. It compares favorably with 153 Sm-EDTMP, as 188 Re has more advantageous radioisotopic properties than 153 Sm, and it can be recommended for further studies in conditions of painful bone metastases

microRNA-188 is downregulated in oral squamous cell carcinoma and inhibits proliferation and invasion by targeting SIX1.

Science.gov (United States)

Wang, Lili; Liu, Hongchen

2016-03-01

microRNA-188 expression is downregulated in several tumors. However, its function and mechanism in human oral squamous cell carcinoma (OSCC) remains obscure. The present study aims to identify the expression pattern, biological roles, and potential mechanism by which miR-188 dysregulation is associated with oral squamous cell carcinoma. Significant downregulation of miR-188 was observed in OSCC tissues compared with paired normal tissues. In vitro, gain-of-function, loss-of-function experiments were performed to examine the impact of miR-188 on cancer cell proliferation, invasion, and cell cycle progression. Transfection of miR-188 mimics suppressed Detroit 562 cell proliferation, cell cycle progression and invasion, with downregulation of cyclin D1, MMP9, and p-ERK. Transfection of miR-188 inhibitor in FaDu cell line with high endogenous expression exhibited the opposite effects. Using fluorescence reporter assays, we confirmed that SIX1 was a direct target of miR-188 in OSCC cells. Transfection of miR-188 mimics downregulated SIX1 expression. SIX1 siRNA treatment abrogated miR-188 inhibitor-induced cyclin D1 and MMP9 upregulation. In addition, we found that SIX1 was overexpressed in 32 of 80 OSCC tissues. In conclusion, this study indicates that miR-188 downregulation might be associated with oral squamous cell carcinoma progression. miR-188 suppresses proliferation and invasion by targeting SIX1 in oral squamous cell carcinoma cells.

tavgM_2d_flx_Nx: MERRA 2D IAU Diagnostic, Surface Fluxes, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXFLX) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXFLX or tavgM_2d_flx_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface turbulence flux diagnostic that is time averaged...

A (Nd, Zr(Fe, Co11.5Ti0.5Nx compound as a permanent magnet material

Directory of Open Access Journals (Sweden)

S. Suzuki

2014-11-01

Full Text Available We studied NdFe11TiNx compounds as permanent magnet materials. The (Nd0.7,Zr0.3(Fe0.75Co0.2511.5Ti0.5N0.52 powder that contained a limited amount of the α-(Fe, Co phase shows fairly good magnetic properties, such as a saturation polarization (Js of 1.68 T and an anisotropic field (Ha of 2.88 (Law of approach to saturation – 4.0 MA/m (Intersection of magnetization curves. Both properties are comparable to those of the Nd2Fe14B phase.

Electronic structure and magnetic anisotropy of Sm2Fe17Nx

Science.gov (United States)

Akai, Hisazumi; Ogura, Masako

2014-03-01

Electronic structure and magnetic properties of Sm2Fe17Nx are studies on the basis of the first-principles electronic structure calculation in the framework of the density functional theory within the local density and coherent potential approximations. The magnetic anisotropy of the system as a function of nitrogen concentration x is discussed by taking account not only of the crystal field effects but also of the effects of the f-electron transfer from Sm to the neighboring sites. Also discussed is the magnetic transition temperature that is estimated by mapping the system into a Heisenberg model. The results show the crystalline magnetic anisotropy changes its direction from in-plane to uniaxial ones as x increases. It takes the maximum value near x ~ 2 . 8 and then decreases slightly towards x = 3 . The mechanism for these behaviors is discussed in the light of the results of detailed calculations on the bonding properties between Sm and its neighboring N. This work was partly supported by Elements Strategy Initiative Center for Magnetic Materials Project, the Ministry of Education, Culture, Sports, Science and Technology, Japan.

Crystallization Behavior of A Bulk Amorphous Mg62Cu26Y12 Alloy

Science.gov (United States)

Wu, Shyue-Sheng; Chin, Tsung-Shune; Su, Kuo-Chang

1994-07-01

The crystallization temperature, the associated activation energy and the crystallized structure of a bulk amorphous Mg62Cu26Y12 alloy with a diameter of 2.5 mm were studied. It possesses a one-step crystallization behavior. The crystallization reaction was found to be represented by: AM(MG62Cu26Y12)→Mg2Cu+MgY+CuY+Mg, ( Tx=188°C, Eac=134 kJ/mol) where AM represents the amorphous state, T x the crystallization temperature at an infinitesimal heating rate, and E ac the associated activation energy. The amount of crystalline phases were found to be Mg2Cu:MgY:CuY=76:17:7. The Mg phase is identifiable only by high resolution electron microscopy, not by X-ray diffraction. The crystallization leads to a sharp rise in electrical resistivity which is reversed to those of iron-based amorphous alloys.

tavgM_2d_ocn_Nx: MERRA 2D IAU Ocean Surface Diagnostic, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXOCN) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXOCN or tavgM_2d_ocn_Nx data product is the MERRA Data Assimilation System 2-Dimensional ocean surface single-level diagnostics that is monthly mean...

Could Changes in the Agricultural Landscape of Northeastern China Have Influenced the Long-Distance Transmission of Highly Pathogenic Avian Influenza H5Nx Viruses?

Directory of Open Access Journals (Sweden)

Marius Gilbert

2017-12-01

Full Text Available In the last few years, several reassortant subtypes of highly pathogenic avian influenza viruses (HPAI H5Nx have emerged in East Asia. These new viruses, mostly of subtype H5N1, H5N2, H5N6, and H5N8 belonging to clade 2.3.4.4, have been found in several Asian countries and have caused outbreaks in poultry in China, South Korea, and Vietnam. HPAI H5Nx also have spread over considerable distances with the introduction of viruses belonging to the same 2.3.4.4 clade in the U.S. (2014–2015 and in Europe (2014–2015 and 2016–2017. In this paper, we examine the emergence and spread of these new viruses in Asia in relation to published datasets on HPAI H5Nx distribution, movement of migratory waterfowl, avian influenza risk models, and land-use change analyses. More specifically, we show that between 2000 and 2015, vast areas of northeast China have been newly planted with rice paddy fields (3.21 million ha in Heilongjiang, Jilin, and Liaoning in areas connected to other parts of Asia through migratory pathways of wild waterfowl. We hypothesize that recent land use changes in northeast China have affected the spatial distribution of wild waterfowl, their stopover areas, and the wild-domestic interface, thereby altering transmission dynamics of avian influenza viruses across flyways. Detailed studies of the habitat use by wild migratory birds, of the extent of the wild–domestic interface, and of the circulation of avian influenza viruses in those new planted areas may help to shed more light on this hypothesis, and on the possible impact of those changes on the long-distance patterns of avian influenza transmission.

188Re-SSS lipiodol: radiolabelling and biodistribution following injection into the hepatic artery of rats bearing hepatoma.

Science.gov (United States)

Garin, Etienne; Denizot, Benoit; Noiret, Nicolas; Lepareur, Nicolas; Roux, Jerome; Moreau, Myriam; Herry, Jean-Yves; Bourguet, Patrick; Benoit, Jean-Pierre; Lejeune, Jean-Jacques

2004-10-01

Although intra-arterial radiation therapy with 131I-lipiodol is a useful therapeutic approach to the treatment of hepatocellular carcinoma, various disadvantages limit its use. To describe the development of a method for the labelling of lipiodol with 188Re-SSS (188Re (S2CPh)(S3CPh)2 complex) and to investigate its biodistribution after injection into the hepatic artery of rats with hepatoma. 188Re-SSS lipiodol was obtained after dissolving a chelating agent, previously labelled with 188Re, in cold lipiodol. The radiochemical purity (RCP) of labelling was checked immediately. The 188Re-SSS lipiodol was injected into the hepatic artery of nine rats with a Novikoff hepatoma. They were sacrificed 1, 24 and 48 h after injection, and used for ex vivo counting. Labelling of 188Re-SSS lipiodol was achieved with a yield of 97.3+/-2.1%. The immediate RCP was 94.1+/-1.7%. Ex vivo counting confirmed a predominantly hepatic uptake, with a good tumoral retention of 188Re-SSS lipiodol, a weak pulmonary uptake and a very faint digestive uptake. The 'tumour/non-tumoral liver' ratio was high at 1, 24 and 48 h after injection (2.9+/-1.5, 4.1+/-/4.1 and 4.1+/-0.7, respectively). Using the method described here, 188Re-SSS lipiodol can be obtained with a very high yield and a satisfactory RCP. The biodistribution in rats with hepatoma indicates a good tumoral retention of 188Re-SSS lipiodol associated with a predominant hepatic uptake, a weak pulmonary uptake and a very faint digestive uptake. This product should be considered for intra-arterial radiation therapy in human hepatoma.

Localized corrosion of high alloyed austenitic stainless steels

International Nuclear Information System (INIS)

Morach, R.; Schmuki, P.; Boehni, H.

1992-01-01

The susceptibility of several high alloyed stainless steels against localized corrosion was investigated by traditional potentiostatic and -kinetic methods and the current transient technique. Different test cells, proposed in literature, were evaluated for use in testing of plate materials. The AVESTA-cell showed to be not useful for potentiokinetic current density potential curves, but useable for pitting experiments. After pickling and prepassivation epoxy embedded materials proved to be resistant to crevice corrosion at the metal-resin interface. The electrode in form of a wire was the most reliable crevice free cell design. The grinding of the samples in the pretreatment procedure was found to have a large effect on the pitting corrosion behaviour. Using different paper types with varying grit, a drop in pitting potential for rougher surfaces and an increase in metastable pitting activity was found. Increasing surface roughness led also to changes in the electronic structure of the passive film reflected by a lower bandgap energy. High alloyed stainless steels showed no breakdown potential within the examined potential range. Compared to 18/8 type stainless steels significantly less transients were found. The number of transients decreases with increasing molybdenum and chromium content

Physico-chemical characterisation and biological evaluation of 188-Rhenium colloids for radiosynovectomy

International Nuclear Information System (INIS)

Ures, Ma Cristina; Savio, Eduardo; Malanga, Antonio; Fernández, Marcelo; Paolino, Andrea; Gaudiano, Javier

2002-01-01

Radiosynovectomy is a type of radiotherapy used to relieve pain and inflammation from rheumatoid arthritis. In this study, 188-Rhenium ( 188 Re) colloids were characterized by physical and biological methodologies. This was used to assess which parameters of the kit formulation would be the basis in the development of a more effective radiopharmaceutical for synovectomy. Intraarticular injection in knees of rabbits assessed cavity leakage of activity. The physical characteristics of tin (Sn) and sulphur (S) colloids were determined to assess the formulation with suitable properties. Particles were grouped in three ranges for analyzing their distribution according to their number, volume and surface. The ideal particle size range was considered to be from 2 to 10 microns. Membrane filtration and laser diffraction characterization methodologies were used. While membrane filtration could give misleading data, laser diffraction proportions more reliable results. The Sn colloid showed a better distribution of particle volume and surface than S colloid, in the 2 to 10 microns range. The 188 Re-Sn colloid was obtained with a radiochemical purity higher than 95% after 30 minutes of autoclaving. While Sn colloid kit stability was verified for 60 days, the 188 Re-Sn preparation was stable in the first 24 hrs. No significant intrabatch variability (n = 3) was detected. Biodistribution and scintigraphic studies in rabbits after intraarticular injection showed relevant activity only in knee, being 90% at 48 hours. The 188 Re-Sn colloid is easy to prepare, is stable for 24 hours and shows minimal cavity leakage after intraarticular injection into rabbit knees, suggesting this radiotherapeutical agent has suitable physical properties for evaluation for joint treatment in humans

tavgM_2d_slv_Nx: MERRA 2D IAU Diagnostic, Single Level Meteorology, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXSLV) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXSLV or tavgM_2d_slv_Nx data product is the MERRA Data Assimilation System 2-Dimensional atmospheric single-level diagnostics that is time averaged...

Weldability of the superalloys Haynes 188 and Hastelloy X by Nd:YAG

Directory of Open Access Journals (Sweden)

Graneix Jérémie

2014-01-01

Full Text Available The requirements for welded aircraft parts have become increasingly severe, especially in terms of the reproducibility of the geometry and metallurgical grade of the weld bead. Laser welding is a viable method of assembly to meet these new demands, because of automation, to replace the manual TIG welding process. The purpose of this study is to determine the weldability of Hastelloy X and Haynes 188 alloys by the butt welding process with a Nd:YAG laser. To identify the influential parameters of the welding process (laser power, feed rate, focal diameter and flow of gas while streamlining testing, an experimental design was established with the CORICO software using the graphic correlation method. The position of the focal point was fixed at 1/3 of the thickness of the sheet. The gas flow rate and the power of the beam have a major effect on the mechanical properties and geometry of the weld. The strength of the weld is comparable to that of the base metal. However, there is a significant decrease in the elongation at break of approximately 30%. The first observations of the cross section of the weld by scanning electron microscopy coupled with EBSD analysis show a molten zone presenting dendritic large grains compared to the equiaxed grains of the base metals without a heat affected zone.

Intracoronary Poloxamer 188 Prevents Reperfusion Injury in a Porcine Model of ST-Segment Elevation Myocardial Infarction

Directory of Open Access Journals (Sweden)

Jason A. Bartos, MD, PhD

2016-06-01

Full Text Available Poloxamer 188 (P188 is a nonionic triblock copolymer believed to prevent cellular injury after ischemia and reperfusion. This study compared intracoronary (IC infusion of P188 immediately after reperfusion with delayed infusion through a peripheral intravenous catheter in a porcine model of ST-segment elevation myocardial infarction (STEMI. STEMI was induced in 55 pigs using 45 min of endovascular coronary artery occlusion. Pigs were then randomized to 4 groups: control, immediate IC P188, delayed peripheral P188, and polyethylene glycol infusion. Heart tissue was collected after 4 h of reperfusion. Assessment of mitochondrial function or infarct size was performed. Mitochondrial yield improved significantly with IC P188 treatment compared with control animals (0.25% vs. 0.13%, suggesting improved mitochondrial morphology and survival. Mitochondrial respiration and calcium retention were also significantly improved with immediate IC P188 compared with control animals (complex I respiratory control index: 7.4 vs. 3.7; calcium retention: 1,152 nmol vs. 386 nmol. This benefit was only observed with activation of complex I of the mitochondrial respiratory chain, suggesting a specific effect from ischemia and reperfusion on this complex. Infarct size and serum troponin I were significantly reduced by immediate IC P188 infusion (infarct size: 13.9% vs. 41.1%; troponin I: 19.2 μg/l vs. 77.4 μg/l. Delayed P188 and polyethylene glycol infusion did not provide a significant benefit. These results demonstrate that intracoronary infusion of P188 immediately upon reperfusion significantly reduces cellular and mitochondrial injury after ischemia and reperfusion in this clinically relevant porcine model of STEMI. The timing and route of delivery were critical to achieve the benefit.

An automation of design and modelling tasks in NX Siemens environment with original software - generator module

Science.gov (United States)

Zbiciak, M.; Grabowik, C.; Janik, W.

2015-11-01

Nowadays the design constructional process is almost exclusively aided with CAD/CAE/CAM systems. It is evaluated that nearly 80% of design activities have a routine nature. These design routine tasks are highly susceptible to automation. Design automation is usually made with API tools which allow building original software responsible for adding different engineering activities. In this paper the original software worked out in order to automate engineering tasks at the stage of a product geometrical shape design is presented. The elaborated software works exclusively in NX Siemens CAD/CAM/CAE environment and was prepared in Microsoft Visual Studio with application of the .NET technology and NX SNAP library. The software functionality allows designing and modelling of spur and helicoidal involute gears. Moreover, it is possible to estimate relative manufacturing costs. With the Generator module it is possible to design and model both standard and non-standard gear wheels. The main advantage of the model generated in such a way is its better representation of an involute curve in comparison to those which are drawn in specialized standard CAD systems tools. It comes from fact that usually in CAD systems an involute curve is drawn by 3 points that respond to points located on the addendum circle, the reference diameter of a gear and the base circle respectively. In the Generator module the involute curve is drawn by 11 involute points which are located on and upper the base and the addendum circles therefore 3D gear wheels models are highly accurate. Application of the Generator module makes the modelling process very rapid so that the gear wheel modelling time is reduced to several seconds. During the conducted research the analysis of differences between standard 3 points and 11 points involutes was made. The results and conclusions drawn upon analysis are shown in details.

In-vitro studies with 188Re-HEDP, a clinically used bone pain palliating agent, on bone cancer cells

International Nuclear Information System (INIS)

Sharma, Rohit; Kumar, Chandan; Mallia, Madhava B.; Banerjee, Sharmila; Kameswaran, Mythili

2017-01-01

Rhenium-188 is an attractive radioisotope for a wide variety of radiotherapy applications. 188 Re-HEDP (HEDPhydroxyethylidene- 1,1-diphosphonic acid) is one such, clinically useful, radiopharmaceutical for palliation of bone pain due to osseous metastasis. Herein, our aim was to study the uptake and retention of 188 Re-HEDP in mineralized bone and to assess its cellular toxicity, along with its underlying mechanism in human osteocarcinoma (MG-63 and Soas-2) cell lines. 188 Re-HEDP uptake was found to be significantly higher in mineralized bone. The 188 Re-HEDP complex also induces G2-M cell cycle arrest and thus contributing to apoptosis and cellular toxicity in bone cancer cells. (author)

SKLB188 inhibits the growth of head and neck squamous cell carcinoma by suppressing EGFR signalling.

Science.gov (United States)

Barzegar, Mansoureh; Ma, Shuang; Zhang, Chao; Chen, Xin; Gu, Ying; Shang, Chaowei; Jiang, Xiaojuan; Yang, Jiao; Nathan, Cherie-Ann; Yang, Shengyong; Huang, Shile

2017-10-10

Overexpression of epidermal growth factor receptor (EGFR) occurs in approximately 90% of head and neck squamous cell carcinoma (HNSCC), and is correlated with poor prognosis. Thus, targeting EGFR is a promising strategy for treatment of HNSCC. Several small molecule EGFR inhibitors have been tested in clinical trials for treatment of HNSCC, but none of them are more effective than the current chemotherapeutic drugs. Thus, it is urgently needed to develop novel EGFR inhibitors for HNSCC treatment. By screening an in-house focused library containing approximately 650 000 known kinase inhibitors and kinase inhibitor-like compounds containing common kinase inhibitor core scaffolds, we identified SKLB188 as a lead compound for inhibition of EGFR. The anticancer effects of SKLB188 on HNSCC cells were investigated by in vitro cell growth, cell cycle and apoptosis assays, as well as in vivo FaDu xenograft mouse model. Molecular docking, in vitro kinase profiling and western blotting were performed to characterise EGFR as the molecular target. SKLB188 inhibited HNSCC cell proliferation by inducing G 1 cell cycle arrest, which was associated with downregulating the expression of Cdc25A, cyclins D1/A and cyclin-dependent kinases (CDK2/4), and upregulating the expression of cyclin-dependent kinase (CDK) inhibitors (p21 Cip1 and p27 Kip1 ), leading to decreased phosphorylation of Rb. SKLB188 also induced caspase-dependent apoptosis of HNSCC cells by downregulating the expression of Mcl-1 and survivin. Molecular docking revealed that SKLB188 could bind to the kinase domain of EGFR through hydrogen bonds and hydrophobic interactions. In vitro kinase assay showed that SKLB188 inhibited the activity of a recombinant human EGFR very potently (IC 50 =5 nM). Western blot analysis demonstrated that SKLB188 inhibited the phosphorylation of EGFR and its downstream targets, extracellular signal-regulated protein kinases 1 and 2 (Erk1/2) and Akt in the cells. In addition, SKLB188 dose

Effect of carrier on labeling and biodistribution of Re-188-Hydroxyethylidene diphosphonate

International Nuclear Information System (INIS)

Chang, Young Soo; Jeong, Jae Min; Kim, Bo Kwang; Cho, Jung Hyuk; Lee, Dong Soo; Chung, June Key; Lee, Myung Chul; Lee, Seung Jin; Jin, Ren Jie; Lee, Sang Eun

2000-01-01

Re-188-Hydroxyethylidene diphosphonate (HEDP) is a new cost-effective agent for systemic radioisotope therapy of metastatic bone pain. We investigated the influence of carrier for labeling and biodistribution of Re-188-HEDP using HEDP kit with or without carrier (KReO 4 ). The kits (HEDP 15 mg, gentisic acid 4 mg and SnC1 2 .2H 2 O 4.5 mg) with or without carrier (KReO 4 0.1 mg) were labeled with Re-188 solution, made available from an in-house generator by boiling for 15 min. We compared the labeling efficiency and stability of carrier-added and carrier-free preparations of Re-188-HEDP. Biodistribution and imaging studies of each preparation were performed in ICR mice (1.85-3.7 MBq/0.1 ml) and SD rats (74.1-85.2 MBq/0.5 ml). The carrier-added preparation showed high labeling efficiency (95% at pH 5) and high stability in serum (88%, 3hr). However, the carrier-free preparation showed low labeling efficiency (59% at pH 5) and low stability (43%, 3 hr). The carrier-added preparation showed high uptake in bone and low uptake in stomach and kidneys. However, the carrier-free preparation showed lower uptake in bone and higher uptake in both stomach and kidneys, which is supposed to be due to released perrhenate. The carrier-added preparation also showed better images with higher skeletal accumulation, lower uptake in other organs and lower soft tissue uptake than the carrier-free preparation. The results of these studies clearly demonstrate that addition of carrier perrhenate is required for high labeling efficiency, stability, bone uptake and good image quality of Re-188-HEDP.=20

Preliminary study of metabolic radiotherapy with 188Re via small animal imaging

International Nuclear Information System (INIS)

Antoccia, A.; Baldazzi, G.; Bello, M.

2006-01-01

188 Re is a β - (Emax=2.12 MeV) and γ (155 keV) emitter. Since its chemistry is similar to that of the largely employed tracer, 99m Tc, molecules of hyaluronic acid (HA) have been labelled with 188 Re to produce a target specific radiopharmaceutical. The radiolabeled compound, i.v. injected in healthy mice, is able to accumulate into the liver after a few minutes. To study the effect of metabolic radiotherapy in mice, we have built a small gamma camera based on a matrix of YAP:Ce crystals, with 0.6x0.6x10 mm 3 pixels, read out by a R2486 Hamamatsu PSPMT. A high-sensitivity 20 mm thick lead parallel-hole collimator, with hole diameter 1.5 mm and septa of 0.18 mm, is placed in front of the YAP matrix. Preliminary results obtained with various phantoms containing a solution of 188 Re and with C57 black mice injected with the 188 Re-HA solution are presented. To increase the space resolution and to obtain two orthogonal projections simultaneously we are building in parallel two new cameras to be positioned at 90 degrees. They use a CsI(Tl) matrix with 1x1x5 mm 3 pixels read out by H8500 Hamamatsu Flat panel PMT

Biokinetic and dosimetric studies of 188Re-hyaluronic acid: a new radiopharmaceutical for treatment of hepatocellular carcinoma

International Nuclear Information System (INIS)

Melendez-Alafort, Laura; Nadali, Anna; Zangoni, Elena; Banzato, Alessandra; Rondina, Maria; Rosato, Antonio; Mazzi, Ulderico

2009-01-01

Hepatocellular carcinoma (HCC) is the most common primary liver cancer and has very limited therapeutic options. Recently, it has been found that hyaluronic acid (HA) shows selective binding to CD44 receptors expressed in most cancer histotypes. Since the trend in cancer treatment is the use of targeted radionuclide therapy, the aim of this research was to label HA with rhenium-188 and to evaluate its potential use as a hepatocarcinoma therapeutic radiopharmaceutical. Methods: 188 Re-HA was prepared by a direct labelling method to produce a ReO(O-COO) 2 -type coordination complex. 188 Re-HA protein binding and its stability in saline, phosphate buffer, human serum and cysteine solutions were determined. Biokinetic and dosimetric data were estimated in healthy mice (n=60) using the Medical Internal Radiation Dose methodology and mouse model beta-absorbed fractions. To evaluate liver toxicity, alanine aminotranferase (AST) and aspartate aminotranferase (ALT) levels in mice were assessed and the liver maximum tolerated dose (MTD) of 188 Re-HA was determined. Results: A stable complex of 188 Re-HA was obtained with high radiochemical purity (>90%) and low serum protein binding (2%). Biokinetic studies showed a rapid blood clearance (T 1/2 α=21 min). Four hours after administration, 188 Re-HA was almost totally removed from the blood by the liver due to the selective uptake via HA-specific receptors (73.47±5.11% of the injected dose). The liver MTD in mice was ∼40 Gy after 7.4 MBq of 188 Re-HA injection. Conclusions: 188 Re-HA complex showed good stability, pharmacokinetic and dosimetric characteristics that confirm its potential as a new agent for HCC radiation therapy.

Bimetallic low thermal-expansion panels of Co-base and silicide-coated Nb-base alloys for high-temperature structural applications

International Nuclear Information System (INIS)

Rhein, R.K.; Novak, M.D.; Levi, C.G.; Pollock, T.M.

2011-01-01

Research highlights: → Low net thermal expansion bimetallic structural lattice constructed. → Temperatures on the order of 1000 deg. C reached. → Improved silicide coating for niobium alloy developed. - Abstract: The fabrication and high temperature performance of low thermal expansion bimetallic lattices composed of Co-base and Nb-base alloys have been investigated. A 2D sheet lattice with a coefficient of thermal expansion (CTE) lower than the constituent materials of construction was designed for thermal cycling to 1000 deg. C with the use of elastic-plastic finite element analyses. The low CTE lattice consisted of a continuous network of the Nb-base alloy C-103 with inserts of high CTE Co-base alloy Haynes 188. A new coating approach wherein submicron alumina particles were incorporated into (Nb, Cr, Fe) silicide coatings was employed for oxidation protection of the Nb-base alloy. Thermal gravimetric analysis results indicate that the addition of submicron alumina particles reduced the oxidative mass gain by a factor of four during thermal cycling, increasing lifetime. Bimetallic cells with net expansion of 6 x 10 -6 /deg. C and 1 x 10 -6 /deg. C at 1000 deg. C were demonstrated and their measured thermal expansion characteristics were consistent with analytical models and finite element analysis predictions.

Automation of labelling of Lipiodol with high-activity generator-produced 188Re

International Nuclear Information System (INIS)

Lepareur, Nicolas; Ardisson, Valerie; Noiret, Nicolas; Boucher, Eveline; Raoul, Jean-Luc; Clement, Bruno; Garin, Etienne

2011-01-01

This work describes optimisation of the kit formulation for labelling of Lipiodol with high-activity generator-produced rhenium-188. Radiochemical purity (RCP) was 92.52±2.3% and extraction yield was 98.56±1.2%. The synthesis has been automated with a TADDEO module (Comecer) giving a mean final yield of 52.68±9.6%, and reducing radiation burden to the radiochemist by 80%. Radiolabelled Lipiodol ( 188 Re-SSS/Lipiodol) is stable for at least 7 days (RCP=91.07±0.9%).

Quadrupole moments of the 12+ isomers in 188Hg and 190Hg

International Nuclear Information System (INIS)

Dracoulis, G.D.; Lonnroth, T.; Vajda, S.; Dafni, E.; Schatz, G.

1984-01-01

The electric quadrupole interaction of the 12 + isomers in 188 Hg and 190 Hg has been measured in solid Hg. The quadrupole moments deduced, vertical strokeQ[ 188 Hg(12 + )]vertical stroke = 91(11) e fm 2 and vertical strokeQ[ 190 Hg(12 + )]vertical stroke = 117(14) e fm 2 suggest a possible change in γ-deformation due to the rotation alignment of the isub(13/2) quasi-neutrons. The temperature dependence of the electric field gradient tensor in Hg was also determined. (orig.)

Effect of carrier on labeling and biodistribution of Re-188-hydroxyethylidene disphosphonate (HEDP)

International Nuclear Information System (INIS)

Jang, Y. S.; Jeong, J. M.; Kim, B. K.; Lee, D. S.; Jeong, J. K.; Lee, M. C.; Cho, J. H.

1998-01-01

Re-188- hydroxyethylidene disphosphonate (HEDP) is a new cost-effective agent for systemic radioisotope therapy of metastatic bone pain. We investigated the influence of carrier for labeling and biodistribution of Re-188-HEDP using HEDP kit(HEDP 15 mg, gentisic acid 4 mg and SnCl 2 2H 2 O 4.5 mg) with or without carrier (KReO 4 0.1 mg). The kits labeled with Re-188 solution available from an in-house generator by boiling for 15 min. The generator provides high 70-80 % equil yields and has an indefnite self-life. We compared the stability of carrier-added(CA) and carrier-free(CF) preparations of Re-188-HEDP. Biodistribution and imaging studies of each preparation were performed in ICR mice(1.85-3.7 MBq/0.1 ml) and SD rats(74.1-85.2 MBq/0.5 ml). The CA preparation showed high labeling efficiency(95% at pH 5) and high stability in serum(88%, 3 hr). However, the CF preparation showed low labeling efficiency(59% at pH 5) and low stability(43%, 3 hr). The CA preparation showed high uptake in bone and low uptake in stomach and kidneys. However, the CF preparation showed lower uptake in bone and higher uptake in both stomach and kidney, which is supposed to be due to released perrhenate. The CA preparation also showed better images with higher skeletal accumulation, lower uptake in other organs and lower soft tissue uptake than the CF preparation of carrier perrhenate is required for high labeling efficiency, stability, bone uptake and good image quality of Re-188-HEDP

Radiolabeling of rituximab with 188Re and 99mTc using the tricarbonyl technology

International Nuclear Information System (INIS)

Dias, Carla Roberta; Jeger, Simone; Osso, Joao Alberto; Mueller, Cristina; De Pasquale, Christine; Hohn, Alexander; Waibel, Robert; Schibli, Roger

2011-01-01

Introduction: The most successful clinical studies of immunotherapy in patients with non-Hodgkin's lymphoma (NHL) use the antibody rituximab (RTX) targeting CD20 + B-cell tumors. Rituximab radiolabeled with β - emitters could potentiate the therapeutic efficacy of the antibody by virtue of the particle radiation. Here, we report on a direct radiolabeling approach of rituximab with the 99m Tc- and 188 Re-tricarbonyl core (IsoLink technology). Methods: The native format of the antibody (RTX wt ) as well as a reduced form (RTX red ) was labeled with 99m Tc/ 188 Re(CO) 3 . The partial reduction of the disulfide bonds to produce free sulfhydryl groups (-SH) was achieved with 2-mercaptoethanol. Radiolabeling efficiency, in vitro human plasma stability as well as transchelation toward cysteine and histidine was investigated. The immunoreactivity and binding affinity were determined on Ramos and/or Raji cells expressing CD20. Biodistribution was performed in mice bearing subcutaneous Ramos lymphoma xenografts. Results: The radiolabeling efficiency and kinetics of RTX red were superior to that of RTX wt ( 99m Tc: 98% after 3 h for RTX red vs. 70% after 24 h for RTX wt ). 99m Tc(CO) 3 -RTX red was used without purification for in vitro and in vivo studies whereas 188 Re(CO) 3 -RTX red was purified to eliminate free 188 Re-precursor. Both radioimmunoconjugates were stable in human plasma for 24 h at 37 o C. In contrast, displacement experiments with excess cysteine/histidine showed significant transchelation in the case of 99m Tc(CO) 3 -RTX red but not with pre-purified 188 Re(CO) 3 -RTX red . Both conjugates revealed high binding affinity to the CD20 antigen (K d =5-6 nM). Tumor uptake of 188 Re(CO) 3 -RTX red was 2.5 %ID/g and 0.8 %ID/g for 99m Tc(CO) 3 -RTX red 48 h after injection. The values for other organs and tissues were similar for both compounds, for example the tumor-to-blood and tumor-to-liver ratios were 0.4 and 0.3 for 99m Tc(CO) 3 -RTX red and for 188 Re

tavgM_2d_rad_Nx: MERRA 2D IAU Diagnostic, Radiation Surface and TOA, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXRAD) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXRAD or tavgM_2d_rad_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface and TOA radiation flux that is time averaged single-level...

A method of computer aided design with self-generative models in NX Siemens environment

Science.gov (United States)

Grabowik, C.; Kalinowski, K.; Kempa, W.; Paprocka, I.

2015-11-01

Currently in CAD/CAE/CAM systems it is possible to create 3D design virtual models which are able to capture certain amount of knowledge. These models are especially useful in an automation of routine design tasks. These models are known as self-generative or auto generative and they can behave in an intelligent way. The main difference between the auto generative and fully parametric models consists in the auto generative models ability to self-organizing. In this case design model self-organizing means that aside from the possibility of making of automatic changes of model quantitative features these models possess knowledge how these changes should be made. Moreover they are able to change quality features according to specific knowledge. In spite of undoubted good points of self-generative models they are not so often used in design constructional process which is mainly caused by usually great complexity of these models. This complexity makes the process of self-generative time and labour consuming. It also needs a quite great investment outlays. The creation process of self-generative model consists of the three stages it is knowledge and information acquisition, model type selection and model implementation. In this paper methods of the computer aided design with self-generative models in NX Siemens CAD/CAE/CAM software are presented. There are the five methods of self-generative models preparation in NX with: parametric relations model, part families, GRIP language application, knowledge fusion and OPEN API mechanism. In the paper examples of each type of the self-generative model are presented. These methods make the constructional design process much faster. It is suggested to prepare this kind of self-generative models when there is a need of design variants creation. The conducted research on assessing the usefulness of elaborated models showed that they are highly recommended in case of routine tasks automation. But it is still difficult to distinguish

Luminescence properties of Eu2+-doped MAl2-xSixO4-xNx (M = Ca, Sr, Ba) conversion phosphor for white LED applications

NARCIS (Netherlands)

Li, Y.Q.; With, de G.; Hintzen, H.T.J.M.

2006-01-01

Undoped and Eu-doped MAl2-xSixO4-2Nx (M = Ca, Sr, Ba) were synthesized by a solid-state reaction method at 1300 - 1400 ¿C under nitrogen-hydrogen atmosphere. The solubility of (SiN)+, in MAl2O4 was determined. Nitrogen can be incorporated into MAl2O4 by replacement of (AlO)+ by (SiN)+, whose amount

Study on therapy of 188Re labelled stannic sulfur suspension in nude mice bearing human colon tumor

International Nuclear Information System (INIS)

Li Huiyuan; Wu Yuanfang; Dong Mo

2003-01-01

The effect of therapy, tissue distribution and stability are studied in nude mice bearing human colon tumor after injections of 188 Re labelled stannic sulfur suspension. The tissues are observed with electric microscope. The results show that 188 Re labelled stannic sulfur suspension is stabilized in the tumor and its inhibitive effects on human colon tumor cells are obvious. 188 Re labelled stannic sulfur suspension is a potential radiopharmaceuticals for therapy of human tumor

Electrical Resistance Alloys and Low-Expansion Alloys

DEFF Research Database (Denmark)

Kjer, Torben

1996-01-01

The article gives an overview of electrical resistance alloys and alloys with low thermal expansion. The electrical resistance alloys comprise resistance alloys, heating alloys and thermostat alloys. The low expansion alloys comprise alloys with very low expansion coefficients, alloys with very low...... thermoelastic coefficients and age hardenable low expansion alloys....

17 CFR 256.188 - Research, development, or demonstration expenditures.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Research, development, or... COMPANIES, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 4. Deferred Debits § 256.188 Research, development, or... of all expenditures for research, development or demonstration undertaken by or sponsored through the...

tavgM_2d_int_Nx: MERRA 2D IAU Diagnostic, Vertical Integrals and Budget Terms, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXINT) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXINT or tavgM_2d_int_Nx data product is the MERRA Data Assimilation System 2-Dimensional vertical integral that is time averaged single-level at the native...

tavgM_2d_lnd_Nx: MERRA 2D IAU Diagnostic, Land Only States and Diagnostics, Monthly Mean 0.667 x 0.5 degree V5.2.0 (MATMNXLND) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MATMNXLND or tavgM_2d_lnd_Nx data product is the MERRA Data Assimilation System 2-Dimensional land surface diagnostic that is time averaged single-level at the...

Radiolabeling of anti-CD20 with Re-188 for treatment of non-Hodgkin's lymphoma: radiochemical control

International Nuclear Information System (INIS)

Dias, Carla R.; Osso Junior, Joao A.

2009-01-01

The development of tumor-selective radiopharmaceuticals is clinically desirable as a means of detecting or confirming the presence and location of primary and metastatic lesions and monitoring tumor response to (chemo)therapy. In addition, the application of targeted radiotherapeutics provides a unique and effective modality for direct tumor treatment. In this manner the radioimmunotherapy (RIT) uses the targeting features of monoclonal antibody to deliver radiation from an attached radionuclide. Antibody therapy directed against the CD20 antigen on the surface of B-cells is considered one of the first successful target-specific therapies in oncology. The radionuclide rhenium-188 ( 188 Re) is currently produced from the father nuclide tungsten-188 ( 188 W) through a transportable generator system. Because of its easy availability and suitable nuclear properties (EβMAX = 2.1 MeV, t 1/2 = 16.9 h, Eγ = 155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agent and could be conveniently utilized for imaging and dosimetric purposes. The purpose of this work is to show the radiochemical control of the optimized formulation (solution) and lyophilized formulation (kit) of labeled rituximab (anti-CD20) with 188 Re. Rituximab was reduced by incubation with 2-mercaptoethanol at room temperature. The number of resulting free sulfhydryl groups was assayed with Ellman's reagent. Radiochemical purity of 188 Re-rituximab was evaluated using instant thin layer chromatography-silica gel (ITLC-SG). Quality control methods for evaluation of radiochemical purity showed good labeling yield of the antibody. (author)

The alpha-branching ratios of the 188,190,192Pb isotopes

International Nuclear Information System (INIS)

Wauters, J.; Dendooven, P.; Decrock, P.; Huyse, M.; Reusen, G.; Duppen, P. van

1992-01-01

The α-branching ratios (b α ) of 192,190,188 Pb are measured using mass-separated sources. Different experimental set-ups are used - one detector as well as two detector set-ups - thereby detecting the α particles from the parent and/or via α decay formed daughter nuclei, the β-delayed gamma radiation from the parent and/or via β decay formed daughter nuclei in the Tl KX Rays from electron capture decay. Values for b α of 6.2(6) 10 -5 and 4.0(4) 10 -3 were found for 191,190 Pb respectively. For 188 Pb, limits on the b α values were obtained: 0.03 α α values showed that the discrepancies in the b α values were not due to inadequate correction procedures, as was suggested, but to experimental uncertainties in the efficiency determination of the different detection set-ups and to an unreliable β-decay scheme for 188 Pb. The b α obtained in this work show that the lead α decay is not faster than the Hg α decay and that there is no need to assume a disappearance of the Z=82 shell closure halfway between N=82 and N=126. (orig.)

Country report: India. Development of Radiopharmaceuticals Based on 188Re and 90Y for Radionuclide Therapy

International Nuclear Information System (INIS)

Venkatesh, M.; Pandey, U.; Dhami, P.S.; Chakravarty, R.; Kameswaran, M.; Subramanian, S.; Dash, A.; Samuel, G.

2010-01-01

During the past decade, our group has focused attention on the development of therapeutic radiopharmaceuticals incorporating radioisotopes such as 90 Y, 188 Re etc. As the primary source of the radioisotopes 90 Y and 188 Re are the 90 Sr/ 90 Y generators and 188 W/ 188 Re generators respectively, the local availability of these generator systems is very important for the successful development of radiopharmaceuticals incorporating these radioisotopes. In this context, 90 Sr/ 90 Y generators based on Supported Liquid Membrane (SLM) [1-3] and electrochemical techniques [4] could be designed and deployed in our laboratories for the elution of 90 Y to be used for preparation of 90 Y labeled products. This work formed a part of the IAEA co-ordinated CRP on “Development of Generator Technologies for Therapeutic Radionuclides: 90 Y and 188 Re”. In this report, work on the development of 90 Y radiopharmaceuticals for treatment of liver cancer and non-Hodgkin’s lymphoma (NHL) is reported. In addition, comparison of the Extraction Paper Chromatography technique (EPC) developed for determination of 90 Sr contamination in 90 Y samples with the US Pharmacopeia recommended method as well as the validation of the EPC technique is presented

Biokinetic and dosimetric studies of {sup 188}Re-hyaluronic acid: a new radiopharmaceutical for treatment of hepatocellular carcinoma

Energy Technology Data Exchange (ETDEWEB)

Melendez-Alafort, Laura [Dipartimento di Scienze Farmaceutiche, Universita degli Studi di Padova, 35131 Padua (Italy); Nadali, Anna; Zangoni, Elena [Dipartimento di Scienze Farmaceutiche, Universita degli Studi di Padova, 35131 Padua (Italy); Banzato, Alessandra; Rondina, Maria [Dipartimento di Scienze Oncologiche e Chirurgiche, Universita degli Studi di Padova, Padua (Italy); Rosato, Antonio [Dipartimento di Scienze Oncologiche e Chirurgiche, Universita degli Studi di Padova, Padua (Italy); Istituto Oncologico Veneto, IOV, Padova, Padua (Italy); Mazzi, Ulderico [Dipartimento di Scienze Farmaceutiche, Universita degli Studi di Padova, 35131 Padua (Italy)

2009-08-15

Hepatocellular carcinoma (HCC) is the most common primary liver cancer and has very limited therapeutic options. Recently, it has been found that hyaluronic acid (HA) shows selective binding to CD44 receptors expressed in most cancer histotypes. Since the trend in cancer treatment is the use of targeted radionuclide therapy, the aim of this research was to label HA with rhenium-188 and to evaluate its potential use as a hepatocarcinoma therapeutic radiopharmaceutical. Methods: {sup 188}Re-HA was prepared by a direct labelling method to produce a ReO(O-COO){sub 2}-type coordination complex. {sup 188}Re-HA protein binding and its stability in saline, phosphate buffer, human serum and cysteine solutions were determined. Biokinetic and dosimetric data were estimated in healthy mice (n=60) using the Medical Internal Radiation Dose methodology and mouse model beta-absorbed fractions. To evaluate liver toxicity, alanine aminotranferase (AST) and aspartate aminotranferase (ALT) levels in mice were assessed and the liver maximum tolerated dose (MTD) of {sup 188}Re-HA was determined. Results: A stable complex of {sup 188}Re-HA was obtained with high radiochemical purity (>90%) and low serum protein binding (2%). Biokinetic studies showed a rapid blood clearance (T{sub 1/2}{alpha}=21 min). Four hours after administration, {sup 188}Re-HA was almost totally removed from the blood by the liver due to the selective uptake via HA-specific receptors (73.47{+-}5.11% of the injected dose). The liver MTD in mice was {approx}40 Gy after 7.4 MBq of {sup 188}Re-HA injection. Conclusions: {sup 188}Re-HA complex showed good stability, pharmacokinetic and dosimetric characteristics that confirm its potential as a new agent for HCC radiation therapy.

tavg1_2d_flx_Nx: MERRA 2D IAU Diagnostic, Surface Fluxes, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXFLX) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXFLX or tavg1_2d_flx_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface turbulence flux diagnostic that is time averaged...

Arg188 in rice sucrose transporter OsSUT1 is crucial for substrate transport

Directory of Open Access Journals (Sweden)

Sun Ye

2012-11-01

Full Text Available Abstract Background Plant sucrose uptake transporters (SUTs are H+/sucrose symporters related to the major facilitator superfamily (MFS. SUTs are essential for plant growth but little is known about their transport mechanism. Recent work identified several conserved, charged amino acids within transmembrane spans (TMS in SUTs that are essential for transport activity. Here we further evaluated the role of one of these positions, R188 in the fourth TMS of OsSUT1, a type II SUT. Results The OsSUT1(R188K mutant, studied by expression in plants, yeast, and Xenopus oocytes, did not transport sucrose but showed a H+ leak that was blocked by sucrose. The H+ leak was also blocked by β-phenyl glucoside which is not translocated by OsSUT1. Replacing the corresponding Arg in type I and type III SUTs, AtSUC1(R163K and LjSUT4(R169K, respectively, also resulted in loss of sucrose transport activity. Fluorination at the glucosyl 3 and 4 positions of α-phenyl glucoside greatly decreased transport by wild type OsSUT1 but did not affect the ability to block H+ leak in the R188K mutant. Conclusion OsSUT1 R188 appears to be essential for sucrose translocation but not for substrate interaction that blocks H+ leak. Therefore, we propose that an additional binding site functions in the initial recognition of substrates. The corresponding Arg in type I and III SUTs are equally important. We propose that R188 interacts with glucosyl 3-OH and 4-OH during translocation.

Effect of heat treatment on the microstructures and mechanical properties of Al-5.5Zn-2.5Mg alloy

Energy Technology Data Exchange (ETDEWEB)

Acer, Emine [Erciyes University, Institute of Science, Department of Physics, Kayseri (Turkey); Çadırlı, Emin [Niğde University, Faculty of Arts and Sciences, Department of Physics, Niğde (Turkey); Erol, Harun [Erciyes University, Institute of Science, Department of Physics, Kayseri (Turkey); Karatekin University Faculty of Arts and Sciences, Department of Physics, Çankırı (Turkey); Kırındı, Talip [Kırıkkale University, Faculty of Education, Department of Elementary Education, Kırıkkale (Turkey); Gündüz, Mehmet, E-mail: gunduz@erciyes.edu.tr [Erciyes University, Faculty of Science, Department of Physics, Kayseri (Turkey)

2016-04-26

The Al-5.5 Zn-2.5 Mg (wt%) ternary alloy was prepared using a vacuum melting furnace and a casting furnace. Microstructural and mechanical properties of the alloy were investigated as-cast and under heat-treated conditions. To investigate the effect of heat treatment, numerous designed Al-5.5 Zn-2.5 Mg samples were homogenized under different conditions and then aged under different regimes. The effects of heat treatment on the microstructures were examined by OM, SEM, and TEM, and mechanical properties of the Al-Zn-Mg alloy were studied. A good combination of high microhardness and reasonable tensile strength were obtained by successive and suitable heat treatments. After aging for 24 h at 150°C, the peak microhardnes and tensile strength values were achieved as 157 MPa and 188.8 MPa, respectively. The microscopic fracture surfaces of the aged samples under different homogenization and aging conditions were observed using scanning electron microscopy. Fractographic analysis of the tensile fracture surfaces shows that the type of fracture changed significantly from ductile to more ductile depending on the aging regime.

Preventive study of gastric cancer peritoneal micrometastasis in nude mice with 188Re-labelled monoclonal antibody 3H11

International Nuclear Information System (INIS)

Yang Zhi; Zhang Meiying; Lin Baohe; Zhao Changying; Han Yan; Mou Aping; Ma Yunxia

2001-01-01

In advanced gastric cancer, especially when the serosa is invaded, the implantation of cancer cells in the peritoneum is common, and it affects patients' survival time severely. Based on successfully labelled monoclonal antibody 3H11 with 188 Re, we investigated the effect of RIT (radioimmunotherapy) with 188 Re-3H11 on preventing the establishment of gastric cancer cell peritoneal micrometastasis in nude mice. After 1x10 6 BGC-823, gastric cancer cells were injected into the peritoneal cavity of each mouse, 45 BABL/C nude mice were divided into 9 groups. Each group received the various doses of 188 Re-3H11 or 188 Re-IgG or saline I.P.16 hours postoperation. The injected volume of each mouse was 1.0 mL. The results showed that the survival time depended on injected doses from 0 to 37MBq. The survival time was 170 ± 25.3 days after 37MBq 188 Re-3H11 were treated . It was over 5 times that of the saline group and about 3 times that of the 74MBq 188 Re-IgG group (p 188 Re-3H11 I.P. is effective and safe in the prevention of intra-peritoneally injected gastric cancer cells from surviving, growing and disseminating in nude mice. (author)

Evaluation of 188Re-labeled PEGylated nanoliposome as a radionuclide therapeutic agent in an orthotopic glioma-bearing rat model

Directory of Open Access Journals (Sweden)

Huang FYJ

2015-01-01

Full Text Available Feng-Yun J Huang,1 Te-Wei Lee,2 Chih-Hsien Chang,2 Liang-Cheng Chen,2 Wei-Hsin Hsu,2 Chien-Wen Chang,1 Jem-Mau Lo1 1Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu, Taiwan; 2Institute of Nuclear Energy Research, Longtan, Taiwan Purpose: In this study, the 188Re-labeled PEGylated nanoliposome (188Re-liposome was prepared and evaluated as a therapeutic agent for glioma.Materials and methods: The reporter cell line, F98luc was prepared via Lentivector expression kit system and used to set up the orthotopic glioma-bearing rat model for non-invasive bioluminescent imaging. The maximum tolerated dose applicable in Fischer344 rats was explored via body weight monitoring of the rats after single intravenous injection of 188Re-liposome with varying dosages before the treatment study. The OLINDA/EXM 1.1 software was utilized for estimating the radiation dosimetry. To assess the therapeutic efficacy, tumor-bearing rats were intravenously administered 188Re-liposome or normal saline followed by monitoring of the tumor growth and animal survival time. In addition, the histopathological examinations of tumors were conducted on the 188Re-liposome-treated rats.Results: By using bioluminescent imaging, the well-established reporter cell line (F98luc showed a high relationship between cell number and its bioluminescent intensity (R2=0.99 in vitro; furthermore, it could also provide clear tumor imaging for monitoring tumor growth in vivo. The maximum tolerated dose of 188Re-liposome in Fischer344 rats was estimated to be 333 MBq. According to the dosimetry results, higher equivalent doses were observed in spleen and kidneys while very less were in normal brain, red marrow, and thyroid. For therapeutic efficacy study, the progression of tumor growth in terms of tumor volume and/or tumor weight was significantly slower for the 188Re-liposome-treated group than the control group (P<0.05. As a result, the

tavg1_2d_ocn_Nx: MERRA 2D IAU Ocean Surface Diagnostic, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXOCN) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXOCN or tavg1_2d_ocn_Nx data product is the MERRA Data Assimilation System 2-Dimensional ocean surface single-level diagnostics that is time averaged...

Rhenium-188 - advantages and clinical potential for use of a readily available, cost effective therapeutic radioisotope for applications in nuclear medicine, oncology and interventional cardiology

International Nuclear Information System (INIS)

Knapp, F.F. jr.

2002-01-01

Full text: Carrier-free rhenium-188 (Re-188) is readily available from the alumina-based tungsten-188/rhenium-188 generator system and has many attractive properties for a wide variety of therapeutic applications. The 16.9 h half-life, emission of the 2.2 MeV beta particle and versatile chemistry make Re-188 an important candidate for applications where high radiation penetration is required. In addition, emission of a gamma photon (155 KeV, 15 %) permits evaluation of biodistribution, pharmacokinetics and dosimetry estimates. The long physical half-life of the tungsten-188 (W-188) parent (t 1/2 69 days) and consistent generator performance - with high Re-188 yields and low W-188 parent breakthrough - result in an indefinite shelf-life of several months, dependent on the levels of Re-188 required. Post generator elution in-growth of 62 % of Re-188 after 24 hours in combination with high elution yields (75-85 %) result in 50 % daily yields of the maximal Re-188 available. In addition to research being conducted for the development of a wide variety of new therapeutic radiopharmaceuticals and devices, Re-188 is also being evaluated in physician-sponsored clinical trials in over 15 countries, with applications in nuclear medicine, oncology and interventional cardiology. One major current clinical application involves post-angiographic treatment of arterial segments following PTCA using Re-188 perrhenate or MAG3 liquid-filled balloons as an effective and cost-effective approach for inhibition of the hyperplastic response to vessel damage, which delivers uniform dose to the vessel wall. Re-188-HEDP is being used for palliation of metastatic bone pain palliation. This agent is readily prepared from a simple 'kit' and provides pain palliation as effective as other commercially available agents. The use of the Re-188-labeled Anti-NCA-95 antibody (BW 50/183; CD66 a,b,c,e) in conjunction which external beam irradiation and chemotherapy is an effective method for

Silicon Alloying On Aluminium Based Alloy Surface

International Nuclear Information System (INIS)

Suryanto

2002-01-01

Silicon alloying on surface of aluminium based alloy was carried out using electron beam. This is performed in order to enhance tribological properties of the alloy. Silicon is considered most important alloying element in aluminium alloy, particularly for tribological components. Prior to silicon alloying. aluminium substrate were painted with binder and silicon powder and dried in a furnace. Silicon alloying were carried out in a vacuum chamber. The Silicon alloyed materials were assessed using some techniques. The results show that silicon alloying formed a composite metal-non metal system in which silicon particles are dispersed in the alloyed layer. Silicon content in the alloyed layer is about 40% while in other place is only 10.5 %. The hardness of layer changes significantly. The wear properties of the alloying alloys increase. Silicon surface alloying also reduced the coefficient of friction for sliding against a hardened steel counter face, which could otherwise be higher because of the strong adhesion of aluminium to steel. The hardness of the silicon surface alloyed material dropped when it underwent a heating cycle similar to the ion coating process. Hence, silicon alloying is not a suitable choice for use as an intermediate layer for duplex treatment

In vitro biocorrosion of Ti-6Al-4V implant alloy by a mouse macrophage cell line.

Science.gov (United States)

Lin, Hsin-Yi; Bumgardner, Joel D

2004-03-15

Corrosion of implant alloys releasing metal ions has the potential to cause adverse tissue reactions and implant failure. We hypothesized that macrophage cells and their released reactive chemical species (RCS) affect the alloy's corrosion properties. A custom cell culture corrosion box was used to evaluate how cell culture medium, macrophage cells and RCS altered the Ti-6Al-4V corrosion behaviors in 72 h and how corrosion products affected the cells. There was no difference in the charge transfer in the presence (75.2 +/- 17.7 mC) and absence (62.3 +/- 18.8 mC) of cells. The alloy had the lowest charge transfer (28.2 +/- 4.1 mC) and metal ion release (Ti < 10 ppb, V < 2 ppb) with activated cells (releasing RCS) compared with the other two conditions. This was attributed to an enhancement of the surface oxides by RCS. Metal ion release was very low (Ti < 20 ppb, V < 10 ppb) with nonactivated cells and did not change cell morphology, viability, and NO and ATP release compared with controls. However, IL-1beta released from the activated cells and the proliferation of nonactivated cells were greater on the alloy than the controls. In summary, macrophage cells and RCS reduced the corrosion of Ti-6Al-4V alloys as hypothesized. These data are important in understanding host tissue-material interactions. Copyright 2004 Wiley Periodicals, Inc. J Biomed Mater Res 68A: 717-724, 2004

Poloxamer 407/188 binary thermosensitive hydrogels as delivery systems for infiltrative local anesthesia: Physico-chemical characterization and pharmacological evaluation

International Nuclear Information System (INIS)

Akkari, Alessandra C.S.; Papini, Juliana Z. Boava; Garcia, Gabriella K.; Franco, Margareth K.K. Dias; Cavalcanti, Leide P.; Gasperini, Antonio; Alkschbirs, Melissa Inger; Yokaichyia, Fabiano; Paula, Eneida de; Tófoli, Giovana R.; Araujo, Daniele R. de

2016-01-01

In this study, we reported the development and the physico-chemical characterization of poloxamer 407 (PL407) and poloxamer 188 (PL188) binary systems as hydrogels for delivering ropivacaine (RVC), as drug model, and investigate their use in infiltrative local anesthesia for applications on the treatment of post-operative pain. We studied drug-micelle interaction and micellization process by light scattering and differential scanning calorimetry (DSC), the sol-gel transition and hydrogel supramolecular structure by small-angle-X-ray scattering (SAXS) and morphological evaluation by Scanning Electron Microscopy (SEM). In addition, we have presented the investigation of drug release mechanisms, in vitro/in vivo toxic and analgesic effects. Micellar dimensions evaluation showed the formation of PL407-PL188 mixed micelles and the drug incorporation, as well as the DSC studies showed increased enthalpy values for micelles formation after addition of PL 188 and RVC, indicating changes on self-assembly and the mixed micelles formation evoked by drug incorporation. SAXS studies revealed that the phase organization in hexagonal structure was not affected by RVC insertion into the hydrogels, maintaining their supramolecular structure. SEM analysis showed similar patterns after RVC addition. The RVC release followed the Higuchi model, modulated by the PL final concentration and the insertion of PL 188 into the system. Furthermore, the association PL407-PL188 induced lower in vitro cytotoxic effects, increased the duration of analgesia, in a single-dose model study, without evoking in vivo inflammation signs after local injection. - Highlights: • We present the development and relationships between physico-chemical and biopharmaceutical/pharmacological parameters for the PL407-PL188 binary hydrogel, as well as its use for infiltrative local anesthesia • The addition of PL188 and RVC evoked changes on enthalpy values, self-assembly and the mixed micelles formation • The

Poloxamer 407/188 binary thermosensitive hydrogels as delivery systems for infiltrative local anesthesia: Physico-chemical characterization and pharmacological evaluation

Energy Technology Data Exchange (ETDEWEB)

Akkari, Alessandra C.S. [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil); Papini, Juliana Z. Boava [São Francisco University, Bragança Paulista, São Paulo (Brazil); Garcia, Gabriella K. [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil); Franco, Margareth K.K. Dias [Nuclear and Energy Research Institute, São Paulo, SP (Brazil); Cavalcanti, Leide P. [School of Chemical Engineering, University of Campinas, SP (Brazil); Gasperini, Antonio; Alkschbirs, Melissa Inger [Brazilian Synchrotron Light Laboratory, Campinas, SP (Brazil); Yokaichyia, Fabiano [Department Quantum Phenomena in Novel Materials Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Berlin (Germany); Paula, Eneida de [Department of Biochemistry, Institute of Biology, State University of Campinas, Campinas, SP (Brazil); Tófoli, Giovana R. [Faculty of Dentistry São Leopoldo Mandic, Campinas, São Paulo (Brazil); Araujo, Daniele R. de, E-mail: daniele.araujo@ufabc.edu.br [Human and Natural Sciences Center, ABC Federal University, Santo André, SP (Brazil)

2016-11-01

In this study, we reported the development and the physico-chemical characterization of poloxamer 407 (PL407) and poloxamer 188 (PL188) binary systems as hydrogels for delivering ropivacaine (RVC), as drug model, and investigate their use in infiltrative local anesthesia for applications on the treatment of post-operative pain. We studied drug-micelle interaction and micellization process by light scattering and differential scanning calorimetry (DSC), the sol-gel transition and hydrogel supramolecular structure by small-angle-X-ray scattering (SAXS) and morphological evaluation by Scanning Electron Microscopy (SEM). In addition, we have presented the investigation of drug release mechanisms, in vitro/in vivo toxic and analgesic effects. Micellar dimensions evaluation showed the formation of PL407-PL188 mixed micelles and the drug incorporation, as well as the DSC studies showed increased enthalpy values for micelles formation after addition of PL 188 and RVC, indicating changes on self-assembly and the mixed micelles formation evoked by drug incorporation. SAXS studies revealed that the phase organization in hexagonal structure was not affected by RVC insertion into the hydrogels, maintaining their supramolecular structure. SEM analysis showed similar patterns after RVC addition. The RVC release followed the Higuchi model, modulated by the PL final concentration and the insertion of PL 188 into the system. Furthermore, the association PL407-PL188 induced lower in vitro cytotoxic effects, increased the duration of analgesia, in a single-dose model study, without evoking in vivo inflammation signs after local injection. - Highlights: • We present the development and relationships between physico-chemical and biopharmaceutical/pharmacological parameters for the PL407-PL188 binary hydrogel, as well as its use for infiltrative local anesthesia • The addition of PL188 and RVC evoked changes on enthalpy values, self-assembly and the mixed micelles formation • The

Development of methods of labeling pentavalent DMSA with 99mTc and 188Re

International Nuclear Information System (INIS)

Brambilla, Tania de Paula

2009-01-01

Technetium-99 m is the most useful radionuclide in diagnostic imaging procedures in Nuclear Medicine, more than 80 percent of radiopharmaceuticals are 99m Tc-labeled compounds. 99m Tc-DMSA(V) has been used for imaging of soft tissue, head and neck tumors. It shows a particularly high specificity for medullary thyroid carcinoma and bone metastases in a variety of cancers. Biodistribution studies of 188 Re-DMSA(V) have shown that its general pharmacokinetic properties are similar to that of 99m Tc-DMSA(V), so this agent could be used for targeted radiotherapy of these tumors. The aim of this work is the development of methods of labeling DMSA(V) with 99m Tc and 188 Re. 99m Tc-DMSA(V) can be prepared by two methods. One of them is the indirect one, through the use of a commercial kit of DMSA (III), by adjusting the pH from 2.5 to ∼ 8.5 with NaHCO 3 . This method was evaluated and optimized presenting high labeling yields. The other method is the direct one, through the preparation of a lyophilised kit ready for labeling with 99m Tc, being the method of interest of this work, due to the easy of its clinical use. The most adequate formulation of the kit was: 1.71 mg of DMSA, 0.53 mg of SnCl 2 .2H 2 O and 0.83 mg of ascorbic acid (pH 9). Labeling yields higher than 95% were achieved labeling this kit with 1 to 2 m L of 99m Tc with activities up to 4736 MBq (128 mCi). The kit was stable up to 6 months and biodistribution studies confirmed the quality of the DMSA (V) labeled with 99m Tc using this kit. The reduction potential of Re is lower than the one for Tc, so the labeling conditions of 188 Re-DMSA(V) are different from the ones used for 99m Tc- DMSA(V). 188 Re-DMSA(V) is prepared in acid solution, that makes it possible to use the DMSA (III) commercial kit developed for labeling with 99m Tc, prepared in pH 2.5, for labeling with 188 Re. Labeling yields higher than 95% were achieved with this methodology, with a rection time of 30 minutes at 100 deg C using no more

Non-carrier-added 186,188Re labeled 17α-ethynylestradiol: a potential breast cancer imaging and therapy agent

International Nuclear Information System (INIS)

Fassbender, M.E.; Phillips, Dennis R.; Peterson, E.J.; Ott, K.C.; Arterburn, J.B.

2001-01-01

Receptor-targeted radiopharmaceuticals constitute potential agents for the diagnosis and therapy of cancer. Breast cancer is the most prevalent form of diagnosed cancer in women in the United States, and it accounts for the second highest number of cases of cancer fatalities (1). In Approximately two-thirds of the breast tumors, estrogen and progesterone steroid hormone receptors can be found. Such tumors can often be treated successfully with anti-estrogen hormone therapy (2). Hence, the ability to determine the estrogen receptor (ER) contend of the breast tumor is essential for making the most appropriate choice of treatment for the patient. Along with this diagnostic aspect, steroid-based radiopharmaceuticals with high specific activity offer an encouraging prospect for therapeutic applications: 186,188 Re labeled steroids binding to receptors expressed by cancer cells appear to be potential agents for the irradiation of small to medium-sized tumors. 186 Re has been regarded as an ideal radionuclide for radiotherapy due to its appropriate half-live of 90 h and β-energy of 1.07 MeV. Moreover, the γ-emission of 137 keV that allows in vivo imaging while in therapy is an additional bonus. 188 Re is obtained from a 188 W/ 188 Re radionuclide generator system, representing an advantage for availability at radiopharmacy laboratory by daily elution. In addition, 188 Re emits high energy beta particles with an average energy of 769 keV, and the emission of the 155 keV allows simultaneous imaging for biodistribution evaluation in vivo. In order to avoid competitive saturation of the binding sites of the ligand receptor, Re labeled steroids with high specific activity are required, and the removal of all excess unlabeled ligands is mandatory. 188 Re is eluted from a 188 W/ 188 Re generator produced and provided by Oak Ridge National Laboratory (3). This paper outlines the solid phase-supported preparation of an n.c.a. ( 188 Re)Re-imido estradiol compound. The

Effect of hydrogen on the device performance and stability characteristics of amorphous InGaZnO thin-film transistors with a SiO2/SiNx/SiO2 buffer

Science.gov (United States)

Han, Ki-Lim; Ok, Kyung-Chul; Cho, Hyeon-Su; Oh, Saeroonter; Park, Jin-Seong

2017-08-01

We investigate the influence of the multi-layered buffer consisting of SiO2/SiNx/SiO2 on amorphous InGaZnO (a-IGZO) thin-film transistors (TFTs). The multi-layered buffer inhibits permeation of water from flexible plastic substrates and prevents degradation of overlying organic layers. The a-IGZO TFTs with a multi-layered buffer suffer less positive bias temperature stress instability compared to the device with a single SiO2 buffer layer after annealing at 250 °C. Hydrogen from the SiNx layer diffuses into the active layer and reduces electron trapping at loosely bound oxygen defects near the SiO2/a-IGZO interface. Quantitative analysis shows that a hydrogen density of 1.85 × 1021 cm-3 is beneficial to reliability. However, the multi-layered buffer device annealed at 350 °C resulted in conductive characteristics due to the excess carrier concentration from the higher hydrogen density of 2.12 × 1021 cm-3.

Preparation, biodistribution, and dosimetry of 188Re-Labeled MoAb ior cea1 and its f(ab')2 fragments by avidin-biotin strategy

International Nuclear Information System (INIS)

Ferro-Flores, Guillermina; Pimentel-Gonzalez, Gilmara; Gonzalez-Zavala, Maria Antonia; Murphy, Consuelo Arteaga de; Melendez-Alafort, Laura; Tendilla, Jose I.; Croft, Barbara Y.

1999-01-01

The biotinylated monoclonal antibody (MoAb) ior cea1 and its F(ab') 2 fragments were labeled with Re-188 by combination of avidin-biotin strategy. 188 Re-MoAb, 188 Re-MoAb-biotin, 188 Re-F(ab') 2 , and 188 Re-F(ab') 2 -biotin preparations were produced for these studies with specific activities of 1.30±0.18 GBq/mg and from instant freeze-dried kit formulations using ethane-1-hydroxy-1,1-diphosphonic acid (EHDP) as a weak competing ligand. There were no significant differences (p>0.05) between the biodistribution in mice of biotinylated and unbiotinylated 188 Re-labeled immunoconjugates. When avidin was injected as a chase after injection of 188 Re-MoAb-biotin or 188 Re-F(ab') 2 -biotin, the blood radioactivity level decreased approximately 75% (cumulated activity) and the effective dose decreased almost 25% with respect to that of the radioimmunoconjugates in which the chase effect was not used. Our results suggest that 188 Re-labeled biotinylated MoAb ior cea1 and its F(ab') 2 fragments prepared by this method are stable complexes in vivo

Development of methods of labeling pentavalent DMSA with {sup 99m}Tc and {sup 188}Re; Desenvolvimento de metodos para marcacao de DMSA pentavalente com {sup 99m}Tc e {sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Brambilla, Tania de Paula, email: jtoniolo@ipen.br

2009-07-01

Technetium-99 m is the most useful radionuclide in diagnostic imaging procedures in Nuclear Medicine, more than 80 percent of radiopharmaceuticals are {sup 99m}Tc-labeled compounds. {sup 99m}Tc-DMSA(V) has been used for imaging of soft tissue, head and neck tumors. It shows a particularly high specificity for medullary thyroid carcinoma and bone metastases in a variety of cancers. Biodistribution studies of {sup 188}Re-DMSA(V) have shown that its general pharmacokinetic properties are similar to that of {sup 99m}Tc-DMSA(V), so this agent could be used for targeted radiotherapy of these tumors. The aim of this work is the development of methods of labeling DMSA(V) with {sup 99m}Tc and {sup 188}Re. {sup 99m}Tc-DMSA(V) can be prepared by two methods. One of them is the indirect one, through the use of a commercial kit of DMSA (III), by adjusting the pH from 2.5 to {approx} 8.5 with NaHCO{sub 3}. This method was evaluated and optimized presenting high labeling yields. The other method is the direct one, through the preparation of a lyophilised kit ready for labeling with {sup 99m}Tc, being the method of interest of this work, due to the easy of its clinical use. The most adequate formulation of the kit was: 1.71 mg of DMSA, 0.53 mg of SnCl{sub 2}.2H{sub 2}O and 0.83 mg of ascorbic acid (pH 9). Labeling yields higher than 95% were achieved labeling this kit with 1 to 2 m L of {sup 99m}Tc with activities up to 4736 MBq (128 mCi). The kit was stable up to 6 months and biodistribution studies confirmed the quality of the DMSA (V) labeled with {sup 99m}Tc using this kit. The reduction potential of Re is lower than the one for Tc, so the labeling conditions of {sup 188}Re-DMSA(V) are different from the ones used for {sup 99m}Tc- DMSA(V). {sup 188}Re-DMSA(V) is prepared in acid solution, that makes it possible to use the DMSA (III) commercial kit developed for labeling with {sup 99m}Tc, prepared in pH 2.5, for labeling with {sup 188}Re. Labeling yields higher than 95% were

tavg1_2d_slv_Nx: MERRA 2D IAU Diagnostic, Single Level Meteorology, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXSLV) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXSLV or tavg1_2d_slv_Nx data product is the MERRA Data Assimilation System 2-Dimensional atmospheric single-level diagnostics that is time averaged...

Application of Different Extraction Methods for Investigation of Nonmetallic Inclusions and Clusters in Steels and Alloys

Directory of Open Access Journals (Sweden)

Diana Janis

2014-01-01

Full Text Available The characterization of nonmetallic inclusions is of importance for the production of clean steel in order to improve the mechanical properties. In this respect, a three-dimensional (3D investigation is considered to be useful for an accurate evaluation of size, number, morphology of inclusions, and elementary distribution in each inclusion particle. In this study, the application of various extraction methods (chemical extraction/etching by acid or halogen-alcohol solutions, electrolysis, sputtering with glow discharge, and so on for 3D estimation of nonmetallic Al2O3 inclusions and clusters in high-alloyed steels was examined and discussed using an Fe-10 mass% Ni alloy and an 18/8 stainless steel deoxidized with Al. Advantages and limitations of different extraction methods for 3D investigations of inclusions and clusters were discussed in comparison to conventional two-dimensional (2D observations on a polished cross section of metal samples.

Enhanced poly(γ-glutamic acid) production by H2 O2 -induced reactive oxygen species in the fermentation of Bacillus subtilis NX-2.

Science.gov (United States)

Tang, Bao; Zhang, Dan; Li, Sha; Xu, Zongqi; Feng, Xiaohai; Xu, Hong

2016-09-01

Effects of reactive oxygen species (ROS) on cell growth and poly(γ-glutamic acid) (γ-PGA) synthesis were studied by adding hydrogen peroxide to a medium of Bacillus subtilis NX-2. After optimizing the addition concentration and time of H 2 O 2 , a maximum concentration of 33.9 g/L γ-PGA was obtained by adding 100 µM H 2 O 2 to the medium after 24 H. This concentration was 20.6% higher than that of the control. The addition of diphenyleneiodonium chloride (ROS inhibitor) can interdict the effect of H 2 O 2 -induced ROS. Transcriptional levels of the cofactors and relevant genes were also determined under ROS stress to illustrate the possible metabolic mechanism contributing to the improve γ-PGA production. The transcriptional levels of genes belonging to the tricarboxylic acid cycle and electron transfer chain system were significantly increased by ROS, which decreased the NADH/NAD + ratio and increased the ATP levels, thereby providing more reducing power and energy for γ-PGA biosynthesis. The enhanced γ-PGA synthetic genes also directly promoted the formation of γ-PGA. This study was the first to use the ROS control strategy for γ-PGA fermentation and provided valuable information on the possible mechanism by which ROS regulated γ-PGA biosynthesis in B. subtilis NX-2. © 2015 International Union of Biochemistry and Molecular Biology, Inc.

Country report: Italy (Duatti). Development of a Kit Formulation for Labeling Biotin-Derived Ligands with the Re-188 Nitrido Core

Energy Technology Data Exchange (ETDEWEB)

Pasquali, M.; Boschi, A.; Uccelli, L.; Duatti, A. [Laboratory of Nuclear Medicine, Department of Radiological Sciences, University of Ferrara, 44121 Ferrara (Italy); Janevik-Ivanovska, E. [University of Stip (Macedonia, The Former Yugoslav Republic of)

2010-07-01

Within the scope of this CRP, we developed a series of small-molecule biotinylated Re-188 complexes containing the [{sup 188}Re≡N]{sup 2+} core. These complexes have been prepared using different chemical strategies, but all of them incorporate a biologically active biotin group. The main interest for this effort was brought to us after the introduction by Paganelli et al. of a new approach for the treatment of residual malignant cells after surgical removal of a primary breast tumour, and dubbed IART (Intraoperative Avidination for Radionuclide Therapy) [1]. Since now, the IART approach has been applied using {sup 90}Y as therapeutic radionuclide and a DOTA-functionalized biotin ligand for coordination to the radiometal. A major drawback for using {sup 90}Y as a therapeutic radionuclide comes from the absence of any radioactive decay, associated with the main β-emission, that may allow imaging of the actual biodistribution of injected radioactivity in any individual patient. Other therapeutic radionuclides, such as {sup 177}Lu and {sup 188}Re, possess an additional γ emission that easily allows imaging of target’s uptake, and could be conveniently utilized to monitor the course of therapy. In particular, {sup 188}Re emits a β- particle having almost the same energy as that emitted by {sup 90}Y, but with an associated 155-keV γ-emission that can be efficiently employed for imaging the biodistribution of the injected radiocompound. Considering also that {sup 188}Re is produced through a {sup 188}W/{sup 188}Re transportable generator system, and that deep similarities between the chemistry of congener rhenium and technetium usually allow {sup 99m}Tc compounds to be used for a preliminary evaluation of the biodistribution of the analogous {sup 188}Re compounds, this makes {sup 188}Re as an interesting candidate for application to the IART approach.

Country report: Italy (Duatti). Development of a Kit Formulation for Labeling Biotin-Derived Ligands with the Re-188 Nitrido Core

International Nuclear Information System (INIS)

Pasquali, M.; Boschi, A.; Uccelli, L.; Duatti, A.; Janevik-Ivanovska, E.

2010-01-01

Within the scope of this CRP, we developed a series of small-molecule biotinylated Re-188 complexes containing the [ 188 Re≡N] 2+ core. These complexes have been prepared using different chemical strategies, but all of them incorporate a biologically active biotin group. The main interest for this effort was brought to us after the introduction by Paganelli et al. of a new approach for the treatment of residual malignant cells after surgical removal of a primary breast tumour, and dubbed IART (Intraoperative Avidination for Radionuclide Therapy) [1]. Since now, the IART approach has been applied using 90 Y as therapeutic radionuclide and a DOTA-functionalized biotin ligand for coordination to the radiometal. A major drawback for using 90 Y as a therapeutic radionuclide comes from the absence of any radioactive decay, associated with the main β-emission, that may allow imaging of the actual biodistribution of injected radioactivity in any individual patient. Other therapeutic radionuclides, such as 177 Lu and 188 Re, possess an additional γ emission that easily allows imaging of target’s uptake, and could be conveniently utilized to monitor the course of therapy. In particular, 188 Re emits a β- particle having almost the same energy as that emitted by 90 Y, but with an associated 155-keV γ-emission that can be efficiently employed for imaging the biodistribution of the injected radiocompound. Considering also that 188 Re is produced through a 188 W/ 188 Re transportable generator system, and that deep similarities between the chemistry of congener rhenium and technetium usually allow 99m Tc compounds to be used for a preliminary evaluation of the biodistribution of the analogous 188 Re compounds, this makes 188 Re as an interesting candidate for application to the IART approach

Preparation of 188Re labelled antibodies

International Nuclear Information System (INIS)

Zhu Minghua; Cao Rongzhen; Li Wenxin; Sheng Rong; Yin Duanzhi; He Weiyu; Zhou Wei; Wang Yongxian

1998-01-01

A simple technique of directly labelling antibodies with 188 Re has been developed. The reduction of antibody disulfide groups was achieved by incubation of antibody with ascorbic acid (pH = 6.5) for an hour at room temperature and a solution of excess SnCl 2 in sodium gluconate was added to the AA-reduced antibody followed by the addition of perrhenate. Some factors that influence labelling efficiency, such as the pH of the reaction mixture, the labelling time, and the amount of antibodies and reductive agent, were studied experimentally and a better labelling method was established. The labelling yields, as determined by paper chromatography, were greater than 80%

Future home hemodialysis - advantages of the NxStage System One.

Science.gov (United States)

Takahashi, Susumu

2012-01-01

To improve the quality of life (QOL) of patients with renal failure who are on dialysis, we have been working to promote home hemodialysis (HHD), but it has not come into widespread use at present because of various problems, including limitations of the equipment, the large proportion of elderly patients, and difficulty performing self-care. With regard to problems with the equipment, dialysis equipment for home use has not yet been approved in Japan, so equipment designed for medical facilities has to be used for home dialysis. Such equipment is bulky and occupies living space, as well as involving the cost of home renovation and the need for a caregiver. The NxStage System One (NSO) artificial kidney has served advantages for HHD compared with conventional equipment, since it is compact, portable, and easy to operate (especially for preparation and cleaning), does not require a water supply, occupies less living space, and reduces the need for renovation of the home. Other advantages of the NSO include improvement of QOL by saving time travelling to hospitals and helping patients to participate in social activities. In addition, HHD with the NSO can improve sleep disorders, the restless legs syndrome, and depressive symptoms, resulting in a good outcome. Moreover, HHD with the NSO reduces the need for drugs, such as antihypertensive medications and erythropoietin, possibly leading to saving of healthcare costs. Copyright © 2012 S. Karger AG, Basel.

A 175 Hz / 188 Hz active filter for private power producers; Filtre actif 175 HZ/188 HZ pour producteurs autonomes

Energy Technology Data Exchange (ETDEWEB)

Michalak, P.

1996-12-31

The connection of certain private electric power producers on the source station bus bars may disturb the 175 Hz or 188 Hz centralized control system signals, which carry tariff messages to the Electricite de France (EDF) grid clients. A new active filter has been developed by EDF and Schlumberger, which raise the tariff signal level at the bus bars by injection of a signal with the same frequency. A prototype has been tested in real conditions

Labeling Lanreotide with 125I and 188Re

International Nuclear Information System (INIS)

Bai Hongsheng

2000-01-01

Lanreotide is a new somatostatin analogue. It can bind to human somatostatin receptor (hSSTR) subtype 2 through 5 with high affinity and to hSSTR subtype I with low affinity. We investigate labeling condition, quality control and stability in vitro of 125 I-Lanreotide and 188 Re-lanreotide respectively. (A) Lanreotide is labeled with 125 I using Chloramine T. The effect of reaction condition (such as reaction time, pH value, Lanreotide amount, quantity of Chloramine T and reaction volume) on labeling yield is investigated in detail. (B) The labeling yield and radiochemical purity (RP) is measured with paper chromatography (PC) and Sep-Pak C 18 Cartridge. (C) The stability of 125 I-Lanreotide in vitro is investigated by labeling compound incubating for 48 hours at 37 deg C in the 0.9% sodium chloride solution and RP is tested by PC at specific time intervals. (D) Lanreotide is labeled directly with 188 Re via the mixture of citrate and tartate using stannous chloride as reduced agent. The influence of reaction conditions such as pH, temperature, amount of stannous chloride, amount of Lanreotide and reaction time on labeling yield is investigated in detail. At the time, the stability in vitro quality control and animal test are evaluated

WIYN Open Cluster Study. XXXII. Stellar Radial Velocities in the Old Open Cluster NGC 188

Science.gov (United States)

Geller, Aaron M.; Mathieu, Robert D.; Harris, Hugh C.; McClure, Robert D.

2008-06-01

We present the results of our ongoing radial-velocity (RV) survey of the old (7 Gyr) open cluster NGC 188. Our WIYN 3.5 m data set spans a time baseline of 11 years, a magnitude range of 12 =3 measurements, finding 473 to be likely cluster members. We detect 124 velocity-variable cluster members, all of which are likely to be dynamically hard-binary stars. Using our single member stars, we find an average cluster radial velocity of -42.36 ± 0.04 km s-1. We use our precise RV and proper-motion membership data to greatly reduce field-star contamination in our cleaned color-magnitude diagram, from which we identify six stars of note that lie far from a standard single-star isochrone. We present a detailed study of the spatial distribution of cluster-member populations, and find the binaries to be centrally concentrated, providing evidence for the presence of mass segregation in NGC 188. We observe the BSs to populate a bimodal spatial distribution that is not centrally concentrated, suggesting that we may be observing two populations of BSs in NGC 188, including a centrally concentrated distribution as well as a halo population. Finally, we find NGC 188 to have a global RV dispersion of 0.64 ± 0.04 km s-1, which may be inflated by up to 0.23 km s-1 from unresolved binaries. When corrected for unresolved binaries, the NGC 188 RV dispersion has a nearly isothermal radial distribution. We use this mean-corrected velocity dispersion to derive a virial mass of 2300 ± 460 M sun .

A study of factors affecting the labelling of tartrate with 188Re and the transchelation of the 188Re from the tartrate to a protein

International Nuclear Information System (INIS)

Sailerova, Eva; Billinghurst, M.W.

2003-01-01

The formation of 188 Re-tartrate for use in transchelation reactions and the transchelation of the 188 Re onto albumin was studied. Two labelled tartrate products were separated using a non-traditional mobile phase on ITLC strips. Tartrate labelling yield increases with pH but so does the instability when the product is exposed to air. Lower pH's are preferred when oxygen-free labelling conditions can be achieved. Higher tin levels protect against air oxidation. Stability of the Re-tartrate complex is supported by addition of ascorbic acid and ferrous sulphate, however both these agents decreased the rate of the formation of the Re-tartrate complex. The labelling efficiency of a perrhenate solution decreased with the time for which it is stored prior to the labelling reaction, depending on the radioactive concentration. Re-albumin transchelation efficiency increases with the tartrate concentration, while increased stability of the Re-tartrate complex lowers the transchelation yields of Re-albumin

Network structure and functional properties of transparent hydrogel sanxan produced by Sphingomonas sanxanigenens NX02.

Science.gov (United States)

Wu, Mengmeng; Shi, Zhong; Huang, Haidong; Qu, Jianmei; Dai, Xiaohui; Tian, Xuefeng; Wei, Weiying; Li, Guoqiang; Ma, Ting

2017-11-15

The micro-network structure and functional properties of sanxan, a novel polysaccharide produced by Sphingomonas sanxanigenens NX02, were investigated. Transparent hydrogel sanxan was a high acyl polymer containing 8.96% acetyl and 4.75% glyceroyl. The micro-network structure of sanxan was mainly cyclic configurations composed of side-by-side intermolecular associations, with many rounded nodes found. Sanxan exhibited predominant gelation behavior at concentrations above 0.1%, which was enhanced by adding cations, especially Ca 2+ . The gel strength of sanxan was much higher than that of low acyl gellan, but slightly lower than that of high acyl gellan. Furthermore, the conformation transition temperature was increased in the presence of added cations. Moreover, sanxan showed excellent emulsifying and emulsion stabilizing properties. Consequently, such excellent functional properties make sanxan a good candidate as a gelling, stabilizing, emulsifying, or suspending agent in food and cosmetics industries, and in medical and pharmaceutical usage. Copyright © 2017 Elsevier Ltd. All rights reserved.

Formulation, radiopharmaceutical kinetics and dosimetry of the {sup 188}Re(V)-DMSA complex; Formulacion, radiofarmacocinetica y dosimetria del complejo {sup 188}Re(V)-DMSA

Energy Technology Data Exchange (ETDEWEB)

Garcia S, L; Ferro F, G [Departamento de Materiales Radiactivos. Instituto Nacional de Investigaciones Nucleares, C.P. 52045 Salazar, Estado de Mexico (Mexico); Murphy, C.A. de; Pedraza L, M [Departamento de Medicina Nuclear, Instituto Nacional de la Nutricion, Salvador Zubiran, Mexico D.F. (Mexico); Azorin N, J [Departamento de Fisica, Universidad Autonoma Metropolitana Iztapalapa, Mexico D.F. (Mexico)

1999-07-01

It was developed through experimental design (ANOVA), a formulation to prepare the {sup 188} Re(V)-Dmsa complex. Likewise, there were realized studies of radiopharmaceutical kinetics and internal dosimetry in animals, its normal and with induced tumors, considering an open bi compartmental model using the MIRD methodology. The {sup 188} Re(V)-Dmsa complex was obtained with a radiochemical purity greater than 95% incubating 30 min at 90 Centigrade under the following formulation: [SnCl{sub 2}] = 1.4 mg/ml, [ascorbic acid] = 0.5 mg/ml, p H = 2.0 - 3.0. The stability test of the formulation, shows that after 48 h of its preparation, does not produce radiolytic degradation neither chemical decomposition. The radiopharmaceutical kinetics data show an average residence time 7.2h, velocity constant {alpha} = 0.6508h{sup -1} and {beta} = 0.1046 h{sup -1} with an apparent distribution volume 6.9 l. The main elimination via was renal and it was observed osseous caption with an accumulated activity 522.049 {+-} 62 MBq h (residence time 14.1094 {+-} 1.69h). In according with the dosimetric calculations, by each 37 MBq injected, the equivalent dose at the tumor was 9.67{+-} 0.33 Sv/g, for an effective dose 0.292 {+-} 0.0017 mSv/MBq. The images obtained in the gamma camera of the mice with induced tumors, show that do not have significant accumulation in the metabolic organs. The caption in bone and in tumors induced of the {sup 188} Re(V)-Dmsa complex, show its potential for be used as a palliative agent for pain in patients with osseous metastasis and in the treatment of tumors of soft tissue. (Author)

tavg1_2d_rad_Nx: MERRA 2D IAU Diagnostic, Radiation Surface and TOA, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXRAD) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXRAD or tavg1_2d_rad_Nx data product is the MERRA Data Assimilation System 2-Dimensional surface and TOA radiation flux that is time averaged single-level...

Evaluating the potential of {sup 188}Re-SOCTA-trastuzumab as a new radioimmunoagent for breast cancer treatment

Energy Technology Data Exchange (ETDEWEB)

Luo, T.-Y. [Isotope Application Division, Institute of Nuclear Energy Research, P.O. Box 3-27, Longtan, Taoyuan 325, Taiwan (China)], E-mail: tylo@iner.gov.tw; Tang, I-C.; Wu, Y.-L.; Hsu, K.-L. [Isotope Application Division, Institute of Nuclear Energy Research, P.O. Box 3-27, Longtan, Taoyuan 325, Taiwan (China); Liu, S.-W. [Chemistry Division, Institute of Nuclear Energy Research, Taoyuan 325, Taiwan (China); Kung, H.-C. [Department of Electrical Engineering, Tung Nan University, Taipei 222, Taiwan (China); Lai, P.-S. [Department of Chemistry, National Chung Hsing University, Taichung 402, Taiwan (China); Lin, W.-J. [Isotope Application Division, Institute of Nuclear Energy Research, P.O. Box 3-27, Longtan, Taoyuan 325, Taiwan (China)

2009-01-15

Introduction: Radioimmunotherapy, which utilizes monoclonal antibodies and therapeutic radioisotopes against antigen-expressing tumor tissues, is an attractive therapeutic approach for cancer therapy. Trastuzumab (Herceptin) is a humanized anti-HER-2/neu monoclonal antibody for breast cancer treatment. In this paper, we introduce a new radioimmunoagent, {sup 188}Re-trastuzumab, via a bifunctional ligand, succinimidyl 3,6-diaza-5-oxo-3-[2-((triphenylmethyl)thio)ethyl] -8-[(triphenylmethyl)thio]octanoate (SOCTA), and evaluate its potential to be a therapeutic radiopharmaceutical for breast cancer treatment. Methods: Equimolar amounts of SOCTA and trastuzumab were selected to react, and the conjugation ratio of SOCTA-trastuzumab was evaluated by the MALDI-TOF method. The immunoreactivity of SOCTA-trastuzumab was compared with nonconjugated trastuzumab in HER-2/neu overexpressing human breast cancer cell BT-474. Biodistribution experiment and microSPECT/CT images of {sup 188}Re-SOCTA-trastuzumab being administered intravenously to SCID mice bearing xenografted BT-474 breast cancer were investigated to evaluate the tumor-targeting capability. Results: The covalent attachment of SOCTA to trastuzumab (at 1:1 molar ratio) resulted in the averaged conjugation ratio of 0.27{+-}0.06 (n=3). The complex could easily be labeled with {sup 188}Re and achieve 95% radiochemical purity (RCP) after 1 h of reaction at room temperature. The in vitro stability study also revealed that the RCP of {sup 188}Re-SOCTA-trastuzumab was at a value of more than 85% after 48 h of incubation with human serum. The immunoreactivity evaluation showed that SOCTA-trastuzumab and nonconjugated trastuzumab had similar binding capacity (B{sub max}) to HER-2/neu receptor in BT-474 cells. The animal experiments showed that {sup 188}Re-SOCTA-trastuzumab accumulated more intensively in the tumor site as compared to normal tissue. Conclusion: We suggest that {sup 188}Re-SOCTA-trastuzumab could be a potential

A new material platform of Si photonics for implementing architecture of dense wavelength division multiplexing on Si bulk wafer

Science.gov (United States)

Zhang, Ziyi; Yako, Motoki; Ju, Kan; Kawai, Naoyuki; Chaisakul, Papichaya; Tsuchizawa, Tai; Hikita, Makoto; Yamada, Koji; Ishikawa, Yasuhiko; Wada, Kazumi

2017-12-01

A new materials group to implement dense wavelength division multiplexing (DWDM) in Si photonics is proposed. A large thermo-optic (TO) coefficient of Si malfunctions multiplexer/demultiplexer (MUX/DEMUX) on a chip under thermal fluctuation, and thus DWDM implementation, has been one of the most challenging targets in Si photonics. The present study specifies an optical materials group for DWDM by a systematic survey of their TO coefficients and refractive indices. The group is classified as mid-index contrast optics (MiDex) materials, and non-stoichiometric silicon nitride (SiNx) is chosen to demonstrate its significant thermal stability. The TO coefficient of non-stoichiometric SiNx is precisely measured in the temperature range 24-76 °C using the SiNx rings prepared by two methods: chemical vapor deposition (CVD) and physical vapor deposition (PVD). The CVD-SiNx ring reveals nearly the same TO coefficient reported for stoichiometric CVD-Si3N4, while the value for the PVD-SiNx ring is slightly higher. Both SiNx rings lock their resonance frequencies within 100 GHz in this temperature range. Since CVD-SiNx needs a high temperature annealing to reduce N-H bond absorption, it is concluded that PVD-SiNx is suited as a MiDex material introduced in the CMOS back-end-of-line. Further stabilization is required, considering the crosstalk between two channels; a 'silicone' polymer is employed to compensate for the temperature fluctuation using its negative TO coefficient, called athermalization. This demonstrates that the resonance of these SiNx rings is locked within 50 GHz at the same temperature range in the wavelength range 1460-1620 nm (the so-called S, C, and L bands in optical fiber communication networks). A further survey on the MiDex materials strongly suggests that Al2O3, Ga2O3 Ta2O5, HfO2 and their alloys should provide even more stable platforms for DWDM implementation in MiDex photonics. It is discussed that the MiDex photonics will find various applications

Poloamer 188 as an Adjunct in Prolonged Hypotensive Resucitation

Science.gov (United States)

2017-07-01

exsanguinations remains a leading cause of deaths (approximately 40 %) in both civilian and military trauma. A subset of injured soldiers develop...maintain BP at 60mmHg (mg/kg/h) 81.28±8.29 Total Resus volume till death (ml/kg/h) 11.17±1.3 7 4.72±0.81 0.0005 Total P188 resus till death (mg/kg/h) 94.50

Determination of (187)Os in molybdenite by ICP-MS with neutron-induced (186)Os and (188)Os spikes.

Science.gov (United States)

Qu, W; Du, A; Zhao, D

2001-10-31

The article describes a method for the determination of (187)Os in molybdenite by isotope dilution inductively coupled plasma-mass spectrometry (ID-ICP-MS) with neutron-induced (186)Os and (188)Os spike. The spike used in the present work was prepared in line with the principle by which artificial nuclides are produced in a nuclear reaction. The concentration and isotopic composition of osmium in the prepared spike were evaluated accurately with the isotope dilution method, using negative thermal ion mass spectrometry (N-TIMS). The advantage of this method is that using (186)Os and (188)Os double spikes can effectively compensate for the mass discrimination effects of ICP-MS. Thus, the common correction practice for mass bias in the isotope dilution method with a single spike is unnecessary. In addition, the method enables one to reduce the determined error arising from instrumental instability. The precision for the (187)Os/((186)Os+(188)Os) ratio was approximately 2% (2sigma, RSD), but in the case of (187)Os/(186)Os, (187)Os/(188)Os and (186)Os/(188)Os, precision ranged from 2.0 to 8% (2sigma, RSD). The results for (187)Os concentration in a molybdenite sample determined with this method showed good agreement with reference values.

Radiolabeling of rituximab with {sup 188}Re and {sup 99m}Tc using the tricarbonyl technology

Energy Technology Data Exchange (ETDEWEB)

Dias, Carla Roberta [Instituto de Pesquisas Energeticas e Nucleares, Av. Professor Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Jeger, Simone [Center for Radiopharmaceutical Sciences ETH-PSI-USZ, Paul Scherrer Institute, 5232 Villigen-PSI (Switzerland); Osso, Joao Alberto [Instituto de Pesquisas Energeticas e Nucleares, Av. Professor Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Mueller, Cristina; De Pasquale, Christine; Hohn, Alexander; Waibel, Robert [Center for Radiopharmaceutical Sciences ETH-PSI-USZ, Paul Scherrer Institute, 5232 Villigen-PSI (Switzerland); Schibli, Roger, E-mail: roger.schibli@psi.c [Center for Radiopharmaceutical Sciences ETH-PSI-USZ, Paul Scherrer Institute, 5232 Villigen-PSI (Switzerland); Department of Chemistry and Applied Biosciences of the ETH, 8093 Zurich (Switzerland)

2011-01-15

Introduction: The most successful clinical studies of immunotherapy in patients with non-Hodgkin's lymphoma (NHL) use the antibody rituximab (RTX) targeting CD20{sup +} B-cell tumors. Rituximab radiolabeled with {beta}{sup -} emitters could potentiate the therapeutic efficacy of the antibody by virtue of the particle radiation. Here, we report on a direct radiolabeling approach of rituximab with the {sup 99m}Tc- and {sup 188}Re-tricarbonyl core (IsoLink technology). Methods: The native format of the antibody (RTX{sub wt}) as well as a reduced form (RTX{sub red}) was labeled with {sup 99m}Tc/{sup 188}Re(CO){sub 3}. The partial reduction of the disulfide bonds to produce free sulfhydryl groups (-SH) was achieved with 2-mercaptoethanol. Radiolabeling efficiency, in vitro human plasma stability as well as transchelation toward cysteine and histidine was investigated. The immunoreactivity and binding affinity were determined on Ramos and/or Raji cells expressing CD20. Biodistribution was performed in mice bearing subcutaneous Ramos lymphoma xenografts. Results: The radiolabeling efficiency and kinetics of RTX{sub red} were superior to that of RTX{sub wt} ({sup 99m}Tc: 98% after 3 h for RTX{sub red} vs. 70% after 24 h for RTX{sub wt}). {sup 99m}Tc(CO){sub 3}-RTX{sub red} was used without purification for in vitro and in vivo studies whereas {sup 188}Re(CO){sub 3}-RTX{sub red} was purified to eliminate free {sup 188}Re-precursor. Both radioimmunoconjugates were stable in human plasma for 24 h at 37{sup o}C. In contrast, displacement experiments with excess cysteine/histidine showed significant transchelation in the case of {sup 99m}Tc(CO){sub 3}-RTX{sub red} but not with pre-purified {sup 188}Re(CO){sub 3}-RTX{sub red}. Both conjugates revealed high binding affinity to the CD20 antigen (K{sub d}=5-6 nM). Tumor uptake of {sup 188}Re(CO){sub 3}-RTX{sub red} was 2.5 %ID/g and 0.8 %ID/g for {sup 99m}Tc(CO){sub 3}-RTX{sub red} 48 h after injection. The values for other

Laser surface alloying of aluminium-transition metal alloys

International Nuclear Information System (INIS)

Almeida, A.; Vilar, R.

1998-01-01

Laser surface alloying has been used as a tool to produce hard and corrosion resistant Al-transition metal (TM) alloys. Cr and Mo are particularly interesting alloying elements to produce stable high-strength alloys because they present low diffusion coefficients and solid solubility in Al. To produce Al-TM surface alloys a two-step laser process was developed: firstly, the material is alloyed using low scanning speed and secondly, the microstructure is modified by a refinement step. This process was used in the production of Al-Cr, Al-Mo and Al-Mo and Al-Nb surface alloys by alloying Cr, Mo or Nb powder into an Al and 7175 Al alloy substrate using a CO 2 laser . This paper presents a review of the work that has been developed at Instituto Superior Tecnico on laser alloying of Al-TM alloy, over the last years. (Author) 16 refs

Therapeutic efficacy and microSPECT/CT imaging of {sup 188}Re-DXR-liposome in a C26 murine colon carcinoma solid tumor model

Energy Technology Data Exchange (ETDEWEB)

Chang, Y.-J.; Chang, C.-H.; Yu, C.-Y.; Chang, T.-J.; Chen, L.-C. [Institute of Nuclear Energy Research, Taoyuan, Taiwan (China); Chen, M.-H. [National Health Research Institutes, Miaoli, Taiwan (China); Lee, T.-W. [Institute of Nuclear Energy Research, Taoyuan, Taiwan (China); Ting Gann [National Health Research Institutes, Miaoli, Taiwan (China)], E-mail: gann.ting@msa.hinet.net

2010-01-15

Nanocarriers can selectively target cancer sites and carry payloads, thereby improving diagnostic and therapeutic effectiveness and reducing toxicity. The objective of this study was to investigate the therapeutic efficacy of a new co-delivery radiochemotherapeutics of {sup 188}Re-N,N-bis (2-mercaptoethyl)-N',N'-diethylethylenediamine (BMEDA)-labeled pegylated liposomal doxorubicin (DXR) ({sup 188}Re-DXR-liposome) in a C26 murine colon carcinoma solid tumor model. To evaluate the targeting and localization of {sup 188}Re-DXR-liposome in C26 murine tumor-bearing mice, biodistribution, microSPECT/CT imaging and pharmacokinetic studies were performed. The antitumor effect of {sup 188}Re-DXR-liposome was assessed by tumor growth inhibition, survival ratio and histopathological hematoxylin-eosin staining. The tumor target and localization of the nanoliposome delivery radiochemotherapeutics of {sup 188}Re-DXR-liposome were demonstrated in the biodistribution, pharmacokinetics and in vivo nuclear imaging studies. In the study on therapeutic efficacy, the tumor-bearing mice treated with bimodality radiochemotherapeutics of {sup 188}Re-DXR-liposome showed better mean tumor growth inhibition rate (MGI) and longer median survival time (MGI=0.048; 74 days) than those treated with radiotherapeutics of {sup 188}Re-liposome (MGI=0.134; 60 days) and chemotherapeutics of Lipo-Dox (MGI=0.413; 38 days). The synergistic tumor regression effect was observed with the combination index (CI) exceeding 1 (CI=1.145) for co-delivery radiochemotherapeutics of {sup 188}Re-DXR-liposome. Two (25%) of the mice treated with radiochemotherapeutics were completely cured after 120 days. The therapeutic efficacy of radiotherapeutics of {sup 188}Re-liposome and the synergistic effect of the combination radiochemotherapeutics of {sup 188}Re-DXR-liposome have been demonstrated in a C26 murine solid tumor animal model, which pointed to the potential benefit and promise of the co-delivery of

tavg1_2d_int_Nx: MERRA 2D IAU Diagnostic, Vertical Integrals and Budget Terms, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXINT) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXINT or tavg1_2d_int_Nx data product is the MERRA Data Assimilation System 2-Dimensional vertical integral that is time averaged single-level at the native...

tavg1_2d_lnd_Nx: MERRA 2D IAU Diagnostic, Land Only States and Diagnostics, Time Average 1-hourly 0.667 x 0.5 degree V5.2.0 (MAT1NXLND) at GES DISC

Data.gov (United States)

National Aeronautics and Space Administration — The MAT1NXLND or tavg1_2d_lnd_Nx data product is the MERRA Data Assimilation System 2-Dimensional land surface diagnostic that is time averaged single-level at the...

18 CFR 367.1880 - Account 188, Research, development, or demonstration expenditures.

Science.gov (United States)

2010-04-01

... 188, Research, development, or demonstration expenditures. (a) This account must be charged with the cost of all expenditures coming within the meaning of research, development and demonstration (RD&D) of..., development, and demonstration expenditures that are nonrecurring and that would distort the annual research...

Pitfalls in Using Limitation Clauses in the International General Conditions ECE 188 and Orgalime S 2000

DEFF Research Database (Denmark)

Henschel, Rene Franz

2008-01-01

various individual provisions contained in the general conditions - for example limitation of the right to require repair and further limitation of liability. If this is not motivated by the circumstances surrounding the particular contract, the parties risk creating imbalances in the otherwise well-balanced......The article centers on the rules on the limitation of liability in the general conditions ECE 188 and Orgalime S 2000. ECE 188 differ considerably from S 2000, as the provisions in ECE 188 do not give the necessary consideration to the development in industry practices and legal rules, including...... the approximation and harmonization of legal systems that have taken place during the last 50 years. S 2000 reflects an international trend that increasingly recognizes the importance of striking a balance between the interests of the parties. However, in practice the parties often derogate considerably from...

The therapeutic threesome, Iodine 131, Lutetium-111 and Rhenium-188 Radionuclide Trifecta

International Nuclear Information System (INIS)

Turner, J.H.

2007-01-01

Full text: Affordable, available, cost-effective, safe, efficacious therapeutic radiopharmaceuticals are required for clinical application throughout the world. In-house preparation of non-proprietary therapeutic radiopharmaceuticals at tertiary referral hospitals in all countries following appropriate technology transfer and training at key research and development centres can potentially supply this need. Illustrative examples of novel therapeutic radiopharmaceuticals currently under development in physician sponsored phase II clinical trials and candidates for contemplation of translation to developing countries include: (1) I-131 Rituximab radioimmunotherapy of relapsed/refractory and first-line treatment of non- Hodgkin's lymphoma; (2) Lu-177 octreotate radiopeptide therapy of neuroendocrine malignancy with capecitabine tumour radiosensitization; (3) Re-188 lipiodol intrahepatic arterial therapy of hepatocellular carcinoma. In addition to presentation of preliminary clinical results, the logistics and techniques of preparation, quality control and administration of each of these therapeutic radiopharmaceuticals will be described and the calculation of individual patient dosimetry and issues of radiation safety will also be addressed. 1. Iodine-131 rituximab: I-131 rituximab may be prepared in a hospital department of nuclear medicine equipped with a shielded fume cupboard, using commercially available single-use sterile pyrogen-free labelling kits (Go Medical Industries Pty Ltd, Subiaco, Australia) (1). Individualized prospective dosimetry is performed on each patient by quantitative whole body gamma imaging, to determine the therapeutic administered activity, to provide a maximum safe whole body radiation absorbed dose of 0.75 Gy, which equates to less than 2 Gy to red marrow (2). More than 200 patients with relapsed/refractory non-Hodgkin's lymphoma have been treated at Fremantle Hospital without infection or haemorrhagic incident. Myelosuppression is self

Country report: India. Development of Radiopharmaceuticals Based on {sup 188}Re and {sup 90}Y for Radionuclide Therapy

Energy Technology Data Exchange (ETDEWEB)

Venkatesh, M.; Pandey, U.; Dhami, P. S.; Chakravarty, R.; Kameswaran, M.; Subramanian, S.; Dash, A.; Samuel, G. [Bhabha Atomic Research Centre, Trombay, Mumbai 400 085 (India)

2010-07-01

During the past decade, our group has focused attention on the development of therapeutic radiopharmaceuticals incorporating radioisotopes such as {sup 90}Y, {sup 188}Re etc. As the primary source of the radioisotopes {sup 90}Y and {sup 188}Re are the {sup 90}Sr/{sup 90}Y generators and {sup 188}W/{sup 188}Re generators respectively, the local availability of these generator systems is very important for the successful development of radiopharmaceuticals incorporating these radioisotopes. In this context, {sup 90}Sr/{sup 90}Y generators based on Supported Liquid Membrane (SLM) [1-3] and electrochemical techniques [4] could be designed and deployed in our laboratories for the elution of {sup 90}Y to be used for preparation of {sup 90}Y labeled products. This work formed a part of the IAEA co-ordinated CRP on “Development of Generator Technologies for Therapeutic Radionuclides: {sup 90}Y and {sup 188}Re”. In this report, work on the development of {sup 90}Y radiopharmaceuticals for treatment of liver cancer and non-Hodgkin’s lymphoma (NHL) is reported. In addition, comparison of the Extraction Paper Chromatography technique (EPC) developed for determination of {sup 90}Sr contamination in {sup 90}Y samples with the US Pharmacopeia recommended method as well as the validation of the EPC technique is presented.

188Rhenium-HEDP in the treatment of pain in bone metastases

International Nuclear Information System (INIS)

Gaudiano, J.; Martinez, G.; Hermida, J.C.; Savio, E.; Verdera, S.; Robles, A.; Muniz, S.; Leon, A.; Knapp, F.F.

2001-01-01

Systemic use of radiopharmaceuticals is a recognised alternative method for the treatment of pain in patients with multiple bone metastases. A new option, 188 Re-HEDP is proposed, using generator-obtained 188 Rhenium (β energy = 2.1 MeV, γ energy = 155 keV, half-life = 16.9 hours). After establishing parameters of biodistribution, dosimetry and image acquisition in mice, rats and rabbits, Phase I and II studies were conducted on 12 patients with multiple metastases from carcinomas, with pain surpassing other analgesic options. More than 50% pain relief was found in 91% of the patients, with total relief during a variable period in 41% of them allowing opiate and other analgesic drugs to be decreased or withdrawn, and showing a lower bone marrow contribution to total absorbed dose than that reported for other similar radiopharmaceuticals. Further study of this option is recommended in order to determine higher dose protocols without toxic bone marrow reaction possibilities. (author)

188Rhenium-HEDP in the Treatment of Pain in Bone Metastases

International Nuclear Information System (INIS)

Gaudiano, J.; Savio, E.; Robles, A.; Muniz, S.; Leon, A.; Verdera, S.; Martinez, G.; Hermida, J.C.; Knapp, F.F. Jr.

1999-01-01

Systemic use of radiopharmaceuticals is a recognized alternative method for the treatment of pain in patients with multiple bone metastasis. A new option, 188 Re-HEDP is proposed, using generator-obtained 188 Rhenium (β energy = 2.1 MeV, γ energy = 155 keV, half-life = 16.9 hours). After establishing parameters of biodistribution, dosimetry and image acquisition in mice, rats and rabbits, Phase I and II studies were conducted on 12 patients with multiple metastasis from carcinomas, with pain surpassing other analgesic options. More than 50% pain relief was found in 91% of the patients, with total relief during a variable period in 41% of them allowing opiate and other analgesic drugs to be decreased or withdrawn, and showing a lower bone marrow contribution to total absorbed dose than that reported for other similar radiopharmaceuticals. Further study of this option is recommended in order to determine higher dose protocols without toxic bone marrow reaction possibilities

Poloxamer 407/188 binary thermosensitive hydrogels as delivery systems for infiltrative local anesthesia: Physico-chemical characterization and pharmacological evaluation.

Science.gov (United States)

Akkari, Alessandra C S; Papini, Juliana Z Boava; Garcia, Gabriella K; Franco, Margareth K K Dias; Cavalcanti, Leide P; Gasperini, Antonio; Alkschbirs, Melissa Inger; Yokaichyia, Fabiano; de Paula, Eneida; Tófoli, Giovana R; de Araujo, Daniele R

2016-11-01

In this study, we reported the development and the physico-chemical characterization of poloxamer 407 (PL407) and poloxamer 188 (PL188) binary systems as hydrogels for delivering ropivacaine (RVC), as drug model, and investigate their use in infiltrative local anesthesia for applications on the treatment of post-operative pain. We studied drug-micelle interaction and micellization process by light scattering and differential scanning calorimetry (DSC), the sol-gel transition and hydrogel supramolecular structure by small-angle-X-ray scattering (SAXS) and morphological evaluation by Scanning Electron Microscopy (SEM). In addition, we have presented the investigation of drug release mechanisms, in vitro/in vivo toxic and analgesic effects. Micellar dimensions evaluation showed the formation of PL407-PL188 mixed micelles and the drug incorporation, as well as the DSC studies showed increased enthalpy values for micelles formation after addition of PL 188 and RVC, indicating changes on self-assembly and the mixed micelles formation evoked by drug incorporation. SAXS studies revealed that the phase organization in hexagonal structure was not affected by RVC insertion into the hydrogels, maintaining their supramolecular structure. SEM analysis showed similar patterns after RVC addition. The RVC release followed the Higuchi model, modulated by the PL final concentration and the insertion of PL 188 into the system. Furthermore, the association PL407-PL188 induced lower in vitro cytotoxic effects, increased the duration of analgesia, in a single-dose model study, without evoking in vivo inflammation signs after local injection. Copyright © 2016 Elsevier B.V. All rights reserved.

Preliminary results of transarterial Rhenium-188 HDD Lipiodol in treatment of inoperable primary hepatocellular carcinoma

International Nuclear Information System (INIS)

Sundram, Felix

2004-01-01

Full text: In this paper we present our early experience with a new radio-conjugate, namely rhenium-188 HDD Lipiodol (Re-188 lipiodol). Imported radiopharmaceuticals are generally expensive, particularly for developing countries. A Tungsten (W-188-Re 188) generator obtained from ORNL (Oak Ridge National Laboratory, Tennessee, USA) allows us on-site production of a beta emitting therapeutic isotope (Re-188) for up to 6 months from a single generator. The objectives of this study were to establish the safety of trans-arterial Re-188 lipiodol in patients with inoperable HCC, and determine the adverse effects and efficacy for this radio-conjugate treatment in a multi-center study of patients with advanced HCC. A multi-center study was sponsored by the International Atomic Energy Agency (Vienna) to assess the safety and efficacy of trans-arterial Re-188 HDD conjugated lipiodol (radio-conjugate) in the treatment of patients with inoperable hepatocellular carcinoma (HCC), The radio-conjugate was prepared by using a HDD (4-hexadecyl 1-2, 9, 9-tetramethyl-4, 7-diaza-1, 10-decanethiol) kit developed in Korea, and lipiodol. Over a period of eighteen months seventy patients received at least one treatment of radio-conjugate. Some patients were re-treated if there was no evidence of disease progression. The level of radio-conjugate administered was based on radiation-absorbed dose to critical normal organs, calculated following a 'scout' dose of radio-conjugate. The organs at greatest risk for radiation toxicity are the normal liver, the lung and the bone marrow. A specially designed spreadsheet was used to determine maximum tolerated activity (MTA), defined as the amount of radioactivity calculated to deliver no more than 12 Gray (Gy) to lungs, or 30 Gy to liver, or 1.5 Gy to bone marrow. These doses have been found to be safe in multiple trials using external beam therapy and systemically administered radiopharmaceuticals. Patients were followed for at least twelve weeks

Radiolabeling of anti-CD20 with Re-188 for treatment of Non-Hodgkin's lymphoma: radiochemical control

International Nuclear Information System (INIS)

Dias, C.R.; Osso Junior, J.A.

2008-01-01

Radioimmunotherapy (RIT) uses target-specific monoclonal antibodies or fragments labeled with a radioactive isotope to combine humoral and radiolytic functions and has the advantage of targeting not only the cell to which the antibody is bound but also the surrounding tumor cells and microenvironment. The most successful clinical studies of RIT in patients with Non-Hodgkin's Lymphoma (NHL) have targeted CD20+ Bcell tumors. Antibody therapy directed against the CD20 antigen on the surface of B-cells is considered one of the first successful target-specific therapies in oncology. The radionuclide rhenium-188 ( 188 Re) is currently produced from the father nuclide 188 W through a transportable generator system. Because of its easy availability and suitable nuclear properties (E βMAX = 2.1 MeV, t1/2 = 16.9 h, E γ = 155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agent and could be conveniently utilized for imaging and dosimetric purposes. The objective of this work is the optimization of direct radiolabeling method of anti-CD20 with 188 Re using a liquid formulation. Anti-CD20 was reduced by incubation with 2-mercaptoethanol at room temperature. The number of resulting free sulphydryl groups was assayed with Ellman's reagent. Optimization of radiolabeling was achieved by varying parameters: antibody mass, reducing agent mass, tartrate mass, stability and reaction time, 188 Re volume and activity. Radiochemical purity of 188 Re-anti-CD20 was evaluated using instant thin layer chromatography-silica gel (ITLC-SG). Quality control methods for evaluation of radiochemical purity showed good labeling yield of the antibody but further studies will be carried out in order to improve the labeling yields and consequently the specific activity of the product. (author)

31 CFR 103.188 - Special measures against Commercial Bank of Syria.

Science.gov (United States)

2010-07-01

... Programs Law Enforcement Access to Foreign Bank Records § 103.188 Special measures against Commercial Bank of Syria. (a) Definitions. For purposes of this section: (1) Commercial Bank of Syria means any branch, office, or subsidiary of Commercial Bank of Syria operating in Syria or in any other jurisdiction...

Rhenium-188 as an alternative to Iodine-131 for treatment of breast tumors expressing the sodium/iodide symporter (NIS)

International Nuclear Information System (INIS)

Dadachova, E.; Bouzahzah, B.; Zuckier, L.S.; Pestell, R.G.

2002-01-01

The sodium-iodide symporter (NIS), which transports iodine into the cell, is expressed in thyroid tissue and was recently found to be expressed in approximately 80% of human breast cancers but not in healthy breast tissue. These findings raised the possibility that therapeutics targeting uptake by NIS may be used for breast cancer treatment. To increase the efficacy of such therapy it would be ideal to identify a radioactive therapy with enhanced local emission. The feasibility of using the powerful beta-emitting radiometal 188 Re in the form of 188 Re-perrhenate was therefore compared with 131 I for treatment of NIS-expressing mammary tumors. In the current studies, using a xenografted breast cancer model induced by the ErbB2 oncogene in nude mice, 188 Re-perrhenate exhibited NIS-dependent uptake into the mammary tumor. Dosimetry calculations in the mammary tumor demonstrate that 188 Re-perrhenate is able to deliver a dose 4.5 times higher than 131 I suggesting it may provide enhanced therapeutic efficacy

Improvement of A.E.S System, using a 188Re-radiolabeled hapten

International Nuclear Information System (INIS)

Morandeau, L.

2002-01-01

Full text: Feasibility of two-step radioimmunotherapy (RIT) of cancer by the Affinity Enhancement System (AES) has been demonstrated in experimental and clinical studies. This technique, associating a bispecific antibody (BsAb) and a radiolabeled bivalent peptide, reduces toxicity and improves therapeutic efficacy of the treatment compared to the one step targeting method. The formation of a cyclic complex (antigen-BsAb- hapten-BsAb-antigen) observed on the tumor allows good tumoral fixation. This is associated with low non-specific uptake, due to the fast clearance of the hapten from the organism. Iodine 131, used currently in clinical applications, has however several disadvantages. These include the mean energy of □ . particles, strong y emission and long physical half-life. Rhenium-188 is the radionuclide of choice to replace iodine-131; its low cost, its availability from a W-188/Re-188 generator and its very favorable radiophysical properties (t 1/2 =16.9h; E□=2.118 MeV; Ey (15%)=155keV) make it a very interesting radionuclide for radioimmunotherapy applications. Unlike the case of iodine-131, the radiolabelling of the peptide by rhenium-188 requires the preliminary coupling of a bifunctional chelating agent. This ensures the formation of an in vivo stable complex with the radionuclide. The object of this post-doctoral project is to obtain a rhenium-188 radiolabeled bivalent hapten. To do this, a monovalent hapten will be coupled to a chelating agent that involves two or three patterns to complex the radionuclide, leading to a bivalent or trivalent radiolabeled hapten, suitable for applications in A.E.S. system. The monovalent hapten used, called HSGL (histaminosuccinylglycyllysine) is a small heteropeptide composed of a chain of four molecules which are histamine, succinic acid, glycine, lysine. It is recognised by the antibody anti-HSG. Two kinds of chelating agents, dithiocarbamates and dithiobenzoates will be studied. They have been synthesised at

Magnesium secondary alloys: Alloy design for magnesium alloys with improved tolerance limits against impurities

Energy Technology Data Exchange (ETDEWEB)

Blawert, C., E-mail: carsten.blawert@gkss.d [GKSS Forschungszentrum Geesthacht GmbH, Max-Planck-Str. 1, 21502 Geesthacht (Germany); Fechner, D.; Hoeche, D.; Heitmann, V.; Dietzel, W.; Kainer, K.U. [GKSS Forschungszentrum Geesthacht GmbH, Max-Planck-Str. 1, 21502 Geesthacht (Germany); Zivanovic, P.; Scharf, C.; Ditze, A.; Groebner, J.; Schmid-Fetzer, R. [TU Clausthal, Institut fuer Metallurgie, Robert-Koch-Str. 42, 38678 Clausthal-Zellerfeld (Germany)

2010-07-15

The development of secondary magnesium alloys requires a completely different concept compared with standard alloys which obtain their corrosion resistance by reducing the levels of impurities below certain alloy and process depending limits. The present approach suitable for Mg-Al based cast and wrought alloys uses a new concept replacing the {beta}-phase by {tau}-phase, which is able to incorporate more impurities while being electro-chemically less detrimental to the matrix. The overall experimental effort correlating composition, microstructure and corrosion resistance was reduced by using thermodynamic calculations to optimise the alloy composition. The outcome is a new, more impurity tolerant alloy class with a composition between the standard AZ and ZC systems having sufficient ductility and corrosion properties comparable to the high purity standard alloys.

Alloying principles for magnesium base heat resisting alloys

International Nuclear Information System (INIS)

Drits, M.E.; Rokhlin, L.L.; Oreshkina, A.A.; Nikitina, N.I.

1982-01-01

Some binary systems of magnesium-base alloys in which solid solutions are formed, are considered for prospecting heat resistant alloys. It is shown that elements having essential solubility in solid magnesium strongly decreasing with temperature should be used for alloying maqnesium base alloys with high strength properties at increased temperatures. The strengthening phases in these alloys should comprise essential quantity of magnesium and be rather refractory

Intraspecific responses of 188 rice cultivars to enhanced UVB radiation

International Nuclear Information System (INIS)

Dai, Q.; Peng, A.; Chavez, A.Q.; Vergara, B.S.

1994-01-01

Phytotron studies were conducted to determine the intraspecific variation in sensitivity of rice (Oryza sativa L.) to enhanced UVB and to test the hypothesis that rice cultivars originating from regions with higher ambient UVB radiation are more tolerant to enhanced UVB. Out of the 188 rice cultivars (from various rice growing regions and ecosystems) tested, 143 had significantly reduced plant height, 52 had smaller leaf area, 61 had lower plant dry weight and 41 had less tiller number under elevated UVB radiation (13.0 kJ m −2 day −1 ) for 3 weeks. Six cultivars showed significant positive growth response to enhanced UVB radiation, although the mechanism is not clear at present. These six cultivars were from the summer rice crop of Bangladesh and from high elevation rice areas where prevailing UVB radiation is most likely to be greater. However, there was no correlation between the dry matter changes under enhanced UVB and the ambient UVB level at the origin of the cultivar across the 188 cultivars tested. Therefore, cultivars originating from regions with higher ambient UVB are not necessarily more tolerant to enhanced UVB radiation. (author)

[Experimental study on the corrosion behavior of a type of oral near β-type titanium alloys modified with double glow plasma nitriding].

Science.gov (United States)

Wen, Ke; Li, Fenglan

2015-12-01

To study the electrochemical corrosion performance of a type of biomedical materials near beta titanium alloy(Ti-3Zr-2Sn-3Mo-25Nb, TLM) in artificial saliva before and after nitride changing, and to provide clinical basis for clinical application of titanium alloy TLM. The double glow plasma alloying technology was used to nitride the surface of titanium alloy TLM. The surface properties of the modified layer were observed and tested by optical microscope, scanning electron microscope, glow discharge spectrum analyzer, X-ray diffraction and micro hardness tester. Then, electrochemical measurement system was used to test and compare titanium alloy TLM's electrochemical corrosion in artificial saliva before and after its surface change. Finally, the surface morphology of the original titanium alloy and the modified layer was compared by scanning electron microscope. By the technology of double glow plasma nitriding, the surface of the titanium alloy TLM had been successfully nitrided with a modified layer of 4-5 µm in thickness, uniform and compact. Its main compositions were Ti and Ti(2)N. The Microhardness of modified layer also had been improved from (236.8 ± 5.4) to (871.8 ± 5.2) HV. The self-corrosion potential in electrochemical corrosion tests had been increased from -0.559 V to -0.540 V, while the self- corrosion current density had been reduced from 2.091 × 10(-7) A/cm(2) to 7.188 × 10(-8) A/cm(2). Besides, alternating-current impedance(AC Impedance) had also been increased. With the scanning electron microscope, it's obvious that the diameter of corrosion holes on modified layer were approximately 10 µm. As to the diameter and number of corrosion holes on modified layer, they had been decreased comparing with the original titanium alloy. The type of near beta titanium alloy TLM can construct a nitriding modified layer on its surface. Meanwhile, the performance of its anti- corrosion in artificial saliva has been improved, comparing to the original

Alloy materials

Energy Technology Data Exchange (ETDEWEB)

Hans Thieme, Cornelis Leo (Westborough, MA); Thompson, Elliott D. (Coventry, RI); Fritzemeier, Leslie G. (Acton, MA); Cameron, Robert D. (Franklin, MA); Siegal, Edward J. (Malden, MA)

2002-01-01

An alloy that contains at least two metals and can be used as a substrate for a superconductor is disclosed. The alloy can contain an oxide former. The alloy can have a biaxial or cube texture. The substrate can be used in a multilayer superconductor, which can further include one or more buffer layers disposed between the substrate and the superconductor material. The alloys can be made a by process that involves first rolling the alloy then annealing the alloy. A relatively large volume percentage of the alloy can be formed of grains having a biaxial or cube texture.

Formation of SiNx:H by PECVD: optimization of the optical, bulk passivation and structural properties for photovoltaic applications

International Nuclear Information System (INIS)

Lelievre, J.F.

2007-04-01

The hydrogenated silicon nitride SiNx:H is widely used as antireflection coating and passivation layer in the manufacture of silicon photovoltaic cells. The aim of this work was to implement a low frequency (440 kHz) PECVD reactor and to characterize the obtained SiN layers. After having determined the parameters of the optimal deposition, the physico-chemical structure of the layers has been studied. The optical properties have been studied with the aim to improve the antireflection coating of the photovoltaic cells. The surface and bulk passivation properties, induced by the SiN layer in terms of its stoichiometry, have been analyzed and have revealed the excellent passivating efficiency of this material. At last, have been studied the formation conditions of the silicon nano-crystals in the SiN matrix. (O.M.)

Use of Re-188 labelled anti-EGFr humanized monoclonal antibody h-R3 for radioimmunotherapy of gliomas

International Nuclear Information System (INIS)

Perera, A.; Torres, L.A.; Lopez, G.; Casaco, A.; Batista, J.F.; Pena, Y.; Coca, M.A.; Leyva, R.; Garcia, I.

2007-01-01

Full text: Locally administered monoclonal antibodies labelled with radioisotopes like 90Y, 131I, 186Re, 212Bi, 211At, 177Lu and others, constitute a viable and promising alternative for management different kind of malignancies. The development of 188W/188Re generator has given the possibility of having a radionuclide showing satisfactory features for radioimmunotherapy (Eb2.12 MeV, Eg155 keV, T1/2=16.9 h and easy to make labelling approaches, similar to used for 99mTc). Neuroepithelial-derived tumours show an increased expression of the EGF receptor with regard to adjacent normal tissue. This overexpression could be related with the autocrine stimulation of the neoplasm by EGF and TGFb. Humanized monoclonal antibody h-R3 has shown a high affinity for this EGF receptor, blocking the binding of EGF to it receptor and inducing apoptosis. Thus, it could be a good candidate for radioimmunotherapy of neuroepithelial malignancies. The aim of the present work was to label monoclonal antibody h-R3 with 188Re, to assess it in an animal model and evaluate its internal dosimetry and toxicity in patients with grade III-IV gliomas through a phase I clinical trial. Schwarz's direct labelling method was employed. Briefly, a 2000-fold molar excess of 2-mercaptoethanol was used to reduce bisulfide bonds of the antibody. The amount of sodium glucoheptonate, ascorbic acid and stannous fluoride were varied to achieve optimum labelling yield. 188Re-labeling yield was proportional to the volume of stannous glucoheptonate solution added to the formulation. Radiochemical purity of 188Re-h-R3 was 98.0±0.4%. Challenge against 300-fold molar excess of L-cysteine was made to assess the stability of the tracer. There was no significant difference between stability of 188Re-h-R3 and 99mTc-h-R3 against cysteine challenge up to 24 h. Animal biodistribution study was performed at 3 and 24 h after intravenous administration of 188Re-h-R3 through tale vein of Male Wistar rats. The results were

26 CFR 1.188-1 - Amortization of certain expenditures for qualified on-the-job training and child care facilities.

Science.gov (United States)

2010-04-01

... qualified on-the-job training and child care facilities. 1.188-1 Section 1.188-1 Internal Revenue INTERNAL... qualified on-the-job training and child care facilities. (a) Allowance of deduction—(1) In general. Under... operation of a qualified on-the-job training or child care facility or are integrally related facilities...

On the Magnetic Properties of the K=1 Rotational Band in {sup 188}Re

Energy Technology Data Exchange (ETDEWEB)

Malmskog, S G; Hoejeberg, M

1967-05-15

The transitions in the decay of the 18.6 min {sup 188}Re isomer have been studied with a Ge(Li) detector. Two new weak gamma ray transitions of 156 and 169 keV were found and interpreted as cross-over transitions. From a delayed coincidence experiment using a double lens electron-electron coincidence spectrometer the half-life of the first excited 63.6 keV level in Re was determined as T{sub 1/2} = 56 {+-} 7 psec. The half lives of the first excited 2{sup +} levels in {sup 186}Os and {sup 188}Os were also measured and found to be 0.81 {+-} 0.03 nsec and 0.68 {+-} 0.03 nsec respectively.

188Re DD-3B6/22 Fab' for use in therapy of ovarian cancer: labelling and animal studies

International Nuclear Information System (INIS)

Schmidt, Peter F.; Smith, Suzanne V.; Bundesen, Peter G.

1998-01-01

A fast and high yielding method of 188 Re radiolabelling DD-3B6/22 Fab' is described. An inert atmosphere [N 2 (g)] and ascorbic acid was essential for preparation and storage of therapeutic levels (≤2 GBq/mg) for up to 24 h. Immunoreactivity was greater than 75%. Pharmacokinetic studies in nu/nu mice demonstrated localisation of 188 Re DD-3B6/22 Fab' was equivalent and correlated well with the behaviour observed for 99m Tc DD-3B6/22 Fab' used to image ovarian cancer. Excellent stability at the target site in vivo supports the potential use of 188 Re DD-3B6/22 Fab' in the therapy of ovarian cancer

Nanocrystalline Si pathway induced unipolar resistive switching behavior from annealed Si-rich SiNx/SiNy multilayers

Science.gov (United States)

Jiang, Xiaofan; Ma, Zhongyuan; Yang, Huafeng; Yu, Jie; Wang, Wen; Zhang, Wenping; Li, Wei; Xu, Jun; Xu, Ling; Chen, Kunji; Huang, Xinfan; Feng, Duan

2014-09-01

Adding a resistive switching functionality to a silicon microelectronic chip is a new challenge in materials research. Here, we demonstrate that unipolar and electrode-independent resistive switching effects can be realized in the annealed Si-rich SiNx/SiNy multilayers with high on/off ratio of 109. High resolution transmission electron microscopy reveals that for the high resistance state broken pathways composed of discrete nanocrystalline silicon (nc-Si) exist in the Si nitride multilayers. While for the low resistance state the discrete nc-Si regions is connected, forming continuous nc-Si pathways. Based on the analysis of the temperature dependent I-V characteristics and HRTEM photos, we found that the break-and-bridge evolution of nc-Si pathway is the origin of resistive switching memory behavior. Our findings provide insights into the mechanism of the resistive switching behavior in nc-Si films, opening a way for it to be utilized as a material in Si-based memories.

Development of radiolabeling procedures of bioconjugates with 153Sm and 186-188Re: In-vitro and in-vivo studies. Argentina

International Nuclear Information System (INIS)

Gomez de Castiglia, Silvia

2000-01-01

Mercaptoacetyltriglycine (MAG3) is a compound that has been extensively used in nuclear medicine as a prosthetic group, following carbodiimide activation, for labeling antibodies with 99m Tc and also 188 Re. MAG3 and related derivatives are attractive ligands for coupling to biomolecules in that they provide very stable complexes. In the preconjugate approach radiolabeled MAG3 is chemically activated to obtain Re188-MAG3-activated ester and then this ester is coupled to amines. 188 Re has several potential advantages over other therapeutic radionuclides including the fact that carrier-free 188 Re(T1/2=17 h) can be obtained cost-effectively and on demand from an ''in house'' 188 W/ 189 Re generator. 189 Re decays by emission of a relatively high energy beta particle(Emax=2,11 Mev) which is suitable for radiotherapy followed by emission of 155KeV gamma photons in 10% abundance. The average penetration of the beta particle is 3.3 mm (maximum 10.8 mm), which provides a highly localised region of high energy deposition with little or no damage to adjacent organs. The gamma photon can be used to monitor biodistribution and estimate dosimetry with standard scintigraphic equipment. The aim of this project is to label biomolecules with 188 Re using an active ester of the MAG3. The labeled chelating agent was conjugated with a biotin derivative and with the Polyclonal Immunoglobulin IgG (Sandoz). During this multistep procedure an active ester of tetrafluorophenol and MAG3 carrying the radioisotope is prepared, which is subsequently conjugated to amino groups of the biomolecule. Of the commercially available biotin derivatives we used biocytin which contains a free amino group for conjugation to MAG3 via the MAG3TFP ester. Another derivative DTPA-biocytinamide (DB2) was also labeled with 188 Re. Quality assurance tests were performed on the final preparation of the radiolabeled biomolecules

Synthesis of insulin-like growth factor 1 analogue (188Re/99Tcm-IGF-1A) and the binding with pancreatic carcinoma cell

International Nuclear Information System (INIS)

Zhang Bin; Wu Yiwei; Fan Guanglei; Fan Wo

2007-01-01

Objective: An useful and stable method was developed for labeling insulin-like growth factor 1 analogue (IGF-1A) with 188 Re/ 99 Tc m , and its binding characteristic was studied with human pancreatic cancer cell Patu8988 in this study. Methods: The direct labeling method was adopted to label IGF- 1A under different conditions: 2 to 10 μl Tween80; 0.75 to 25 g/L SnCl 2 ·2H 2 O; 20 to 100 μg IGF-1A; 10 to 500 μl 188 ReO 4 - . The labeling rate was dynamically measured from 5 min to 6 h after labeling. The in vitro stabilities of 188 Re/ 99 Tc m -IGF-1A were accessed by dynamic labeling rates measured at 2 to 24 h. SPECT imaging after intravenous injection of 99 Tc m -IGF-1A and intratumoral injection of 188 Re-IGF-1A in nude mice was performed. Results: The best condition for labeling 188 Re was: 100 μl SnCl 2 ·2H 2 O (10 g/L), 50 μl IGF-1A (2 g/L), 300 μl Na 3 PO 4 , l0 μl 0.1% Tween80, 50 μl 188 ReO 4 - with 30 min reaction time at room temperature and pH 7.0. The maximum labeling rate of 188 Re-IGF-1A was (94.07 ± 0.32)%. The radiochemical purity was (76.57 ± 9.96)% at 24 h after mixing with human serum. The maximum binding efficiency of 188 Re-IGF-1A with Patu8988 cell was (24.13 ± 2.03)% , and the specific binding was 12.68%. The best labeling condition of 99 Tc m was: 100 μl SnCl 2 ·2H 2 O (3 g/L), 40 μl IGF-1A (2 g/L), 2 μl 0.1% Tween80, 50 μl 99 Tc m O - 4. The maximum labeling rate of 99 Tc m -IGF-1A was (94.43 ± 0.75)% and the radiochemical purity was (54.07 ± 3.86)% at 24 h after mixing with human serum. The maximum binding with Patu8988 cell was (22.95 ± 3.94)%, and the specific binding rate was 19.31%. The tumors in nude mice could be best imaged at 6 h after intravenous injection of 99 Tc m -IGF-1A and 48 h after intratumoral injection of 188 Re-IGF-1A. Conclusions: The presented method of labeling IGF-1A with 188 Re/ 99 Tc m was stable and efficient. 188 Re/ 99 Tc m -IGF-1A could bind with the pancreatic cancer cell Patu8988

{sup 188}Rhenium-HEDP in the Treatment of Pain in Bone Metastases

Energy Technology Data Exchange (ETDEWEB)

Gaudiano, J.; Savio, E.; Robles, A.; Muniz, S.; Leon, A.; Verdera, S.; Martinez, G.; Hermida, J.C.; Knapp, F.F., Jr.

1999-01-18

Systemic use of radiopharmaceuticals is a recognized alternative method for the treatment of pain in patients with multiple bone metastasis. A new option, {sup 188}Re-HEDP is proposed, using generator-obtained {sup 188}Rhenium ({beta} energy = 2.1 MeV, {gamma} energy = 155 keV, half-life = 16.9 hours). After establishing parameters of biodistribution, dosimetry and image acquisition in mice, rats and rabbits, Phase I and II studies were conducted on 12 patients with multiple metastasis from carcinomas, with pain surpassing other analgesic options. More than 50% pain relief was found in 91% of the patients, with total relief during a variable period in 41% of them allowing opiate and other analgesic drugs to be decreased or withdrawn, and showing a lower bone marrow contribution to total absorbed dose than that reported for other similar radiopharmaceuticals. Further study of this option is recommended in order to determine higher dose protocols without toxic bone marrow reaction possibilities.

Structural, mechanical, electrical and wetting properties of ZrNx films deposited by Ar/N2 vacuum arc discharge: Effect of nitrogen partial pressure

Science.gov (United States)

Abdallah, B.; Naddaf, M.; A-Kharroub, M.

2013-03-01

Non-stiochiometric zirconium nitride (ZrNx) thin films have been deposited on silicon substrates by vacuum arc discharge of (N2 + Ar) gas mixtures at different N2 partial pressure ratio. The microstructure, mechanical, electrical and wetting properties of these films are studied by means of X-ray diffraction (XRD), micro-Raman spectroscopy, Rutherford back scattering (RBS) technique, conventional micro-hardness testing, electrical resistivity, atomic force microscopy (AFM) and contact angle (CA) measurements. RBS results and analysis show that the (N/Zr) ratio in the film increases with increasing the N2 partial pressure. A ZrNx film with (Zr/N) ratio in the vicinity of stoichiometric ZrN is obtained at N2 partial pressure of 10%. XRD and Raman results indicate that all deposited films have strained cubic crystal phase of ZrN, regardless of the N2 partial pressure. On increasing the N2 partial pressure, the relative intensity of (1 1 1) orientation with respect to (2 0 0) orientation is seen to decrease. The effect of N2 partial pressure on micro-hardness and the resistivity of the deposited film is revealed and correlated to the alteration of grain size, crystallographic texture, stoichiometry and residual stress developed in the film. In particular, it is found that residual stress and nitrogen incorporation in the film play crucial role in the alteration of micro-hardness and resistivity respectively. In addition, CA and AFM results demonstrate that as N2 partial pressure increases, both the surface hydrophobicity and roughness of the deposited film increase, leading to a significant decrease in the film surface free energy (SFE).

{sup 188}Re-HDD/lipiodol therapy for hepatocellular carcinoma: an activity escalation study

Energy Technology Data Exchange (ETDEWEB)

Lambert, Bieke; Vos, Filip de; Wiele, Christophe van de [Ghent University Hospital, Nuclear Medicine Division, Gent (Belgium); Bacher, Klaus; Thierens, Hubert [Ghent University, Department of Medical Physics, Gent (Belgium); Defreyne, Luc [Ghent University Hospital, Division of Interventional Radiology, Gent (Belgium); Vlierberghe, Hans van [Ghent University Hospital, Division of Gastroenterology, Gent (Belgium); Jeong, Jae Min [Seoul National University College of Medicine, Department of Nuclear Medicine, Cancer Research Institute, Seoul (Korea); Wang, Rong Fu [Beijing University, Department of Nuclear Medicine, Beijing (China); Meerbeeck, Jan van [Ghent University Hospital, Department of Respiratory Diseases, Gent (Belgium); Smeets, Peter [Ghent University Hospital, Department of Radiology, Gent (Belgium); Troisi, Roberto [Ghent University Hospital, Division of Abdominal Surgery and Liver Transplantation, Gent (Belgium)

2006-03-15

The aim of this study was to investigate the feasibility of administering increasing activities of {sup 188}Re-4-hexadecyl-1-2,9,9-tetramethyl-4,7-diaza-1,10-decanethiol/lipiodol ({sup 188}Re-HDD/lipiodol) for the treatment of hepatocellular carcinoma (HCC) in patients with well-compensated cirrhosis. The activity levels were increased by 1.1 GBq/step after a 6-week interval without unacceptable adverse events in at least five consecutive patients. Absorbed doses to the various organs were calculated according to the MIRD formalism, based on three gamma-scintigraphic studies. Response was assessed by means of MRI and alpha-fetoprotein (AFP) monitoring. Thirty-five treatments were carried out in 28 patients. Activities from 4.8 to 7.0 GBq {sup 188}Re-HDD/lipiodol were administered via a transfemoral catheter. The mean absorbed dose to the liver (including tumour) was 7.6{+-}2.2, 9.8{+-}4.9 and 15.2{+-}4.9 Gy for the 4.8-, 5.9- and 7.0-GBq groups, respectively. Treatment was well tolerated at all activity levels. Further escalation of the administered activity was not feasible owing to limitations related to the radiolabelling procedure. Response assessment on MRI showed partial response, stable disease and disease progression in 1, 28 and 2 assessable treatments, respectively. In 8 of 17 treatment sessions with an initially elevated AFP, a reduction ranging from 19% to 97% was observed 6 weeks later. (orig.)

Electrochemical characterisation of X10CrNi 18-8 steel in artificial plasma

Directory of Open Access Journals (Sweden)

J. Przondziono

2015-01-01

Full Text Available Quality of applied guide wires conditions the course of treatment and its success to a great extent. In order to simulate conditions that can be found in blood vascular system samples were exposed to artificial blood plasma (T = 37 } 1 oC for the time of 8 h. In order to obtain information regarding physical and chemical properties of modified surface of wire made of X10CrNi 18-8 steel, electrochemical impedance spectroscopy (EIS test and tests of chemical composition of the surface layer X-ray photoelectron spectroscopy (XPS were made. On the ground of performed EIS and XPS tests, favourable impact of steam sterilisation process on corrosion resistance of X10CrNi 18-8 steel was observed only for the case when chemical passivation was applied prior to sterilisation.

Synthesis and in Vitro evaluation of ''1''8''8Re-biotinyl-hydrazino-etda

International Nuclear Information System (INIS)

Pervez, S; Mushtaq, A.; Jehangir, M.

2002-01-01

Pretargeting strategies have overcome many drawbacks associated with the use of directly labelled MoAbs in the diagnosis / treatment of various solid tumors. In particular the avidin-biotin system has received much attention due to extremely high affinity between avidin and biotin. An EDTA derivative of biotin has been synthesized (yield-35%). In order or label biotin derivative (biotinyl-hydrazino-EDTA) , stannous ion was used to reduce ''1''8''8ReO 4 (VII) to lower oxidation state and weak chelating agent glucoheptonate as stabilizer and trans chelating agent. Thin layer chromatography and high performance liquid chromatography techniques were employed to monitor the radiolabeling efficiency. The radiolabeling yield of ''1''8''8Re-EDTA B1 was >95%. The radiolabeled product was found to bind to avidin (70-80%), thereby demonstrating retention of its biological integrity

Influence of a-Si:H deposition power on surface passivation property and thermal stability of a-Si:H/SiNx:H stacks

Directory of Open Access Journals (Sweden)

Hua Li

2012-06-01

Full Text Available The effectiveness of hydrogenated amorphous silicon (a-Si:H layers for passivating crystalline silicon surfaces has been well documented in the literature for well over a decade. One limitation of such layers however has arisen from their inability to withstand temperatures much above their deposition temperature without significant degradation. This limitation is of importance particularly with multicrystalline silicon materials where temperatures of at least 400°C are needed for effective hydrogenation of the crystallographic defects such as grain boundaries. To address this limitation, in this work the surface passivation quality and thermal stability of a stack passivating system, combining a layer of intrinsic a-Si:H and a capping layer of silicon nitride (SiNx:H, on p-type crystalline silicon wafers is studied and optimized. In particular the sensitivity of different microwave (MW power levels for underlying a-Si:H layer deposition are examined. Both effective minority carrier lifetime (ζeff measurement and Fourier transform infrared (FTIR spectrometry were employed to study the bonding configurations, passivating quality and thermal stability of the a-Si:H/SiNx:H stacks. It is established that the higher MW power could result in increased as-deposited ζeff and implied Voc (iVoc values, indicating likely improved surface passivation quality, but that this combination degrades more quickly when exposed to prolonged thermal treatments. The more dihydride-rich film composition corresponding to the higher MW power appears to be beneficial for bond restructuring by hydrogen interchanges when exposed to short term annealing, however it also appears more susceptible to providing channels for hydrogen out-effusion which is the likely cause of the poorer thermal stability for prolonged high temperature exposure compared with stacks with underlying a-Si:H deposited with lower MW power.

Analysis of the prognostic factors for low rectal cancer with the pT1-2NxM0 stage after abdominoperineal resection.

Science.gov (United States)

Zhang, Xing-mao; Ma, Chao; Sun, Da-yong; Wang, Zheng; Zhou, Zhi-xiang

2015-01-01

This study was designed to explore the factors influencing local recurrence and survival for low rectal cancer with pT1-2NxM0 stage after an abdominoperineal resection (APR). Data of 429 patients confirmed to have pT1-2NxM0 after APR were reviewed. The recurrence rate in patients with intraoperative perforation, less than 12 lymph nodes (LNs) harvested, T2 staging, and positive circumferential resection margin (CRM) was 25.1, 19.9, 9.5, and 26.1% compared with 6.9, 7.0, 0, and 5.8% in patients with no perforation, 12 or more LNs harvested, T1, and negative CRM. The 5-year survival rate in patients with age of at least 70, perforation, less than 12 LNs harvested, T2, and positive CRM was 71.1, 60.8, 58.8, 69.9, and 46.0%, but 73.4, 73.5, 73.8, 89.4, and 75.0% in patients with age less than 70, no perforation, 12 or more LNs harvested, T1, and negative CRM. Meanwhile, patients with N0, N1, and N2 had a survival rate of 90.7, 69.9, and 63.9%. Multivariate analysis showed that perforation (PCRM status (P=0.002) were associated with local recurrence, whereas age of the patients (P=0.023), N staging (PCRM status (P=0.004) were associated with survival. APR was affected by patients' age, operation performer, perforation, number of LNs harvested, T staging, N staging, differentiation, and CRM status. Perforation, number of LNs harvested, T staging, differentiation, and CRM status were independent factors for recurrence; meanwhile, age of the patients, N staging, differentiation, and CRM status were independent factors influencing survival.

A new technique for labeling of Lipiodol with 188Re in the treatment of hepatic tumor

International Nuclear Information System (INIS)

Shyh-Jen Wang; Wan-Yu Lin; Bor-Tsung Hsieh; Kai-Yuan Cheng; Lie-Hang Shen; Ming-Ja Su

2004-01-01

A new method for the synthesis of 188 Re-Lipiodol without using a chelating agent and to evaluate the stability and biodistribution of the new agent in rats with hepatic tumors was attempted. Eighteen male Sprague -Dawley rats with liver tumors were sacrificed at 1, 24, and 48 hours (six rats at each time) after injection of approximately 7.4 MBq (0.2 mCi) of 188 Re Lipiodol via the hepatic artery. Samples of tumor, liver and other organs were collected and tissue concentration (%ID/g) of the markers were calculated. A high level of radioactivity in the hepatic tumors was found at every time of the study. The ratios of tumor to normal liver tissue concentration (T/N ratio) were 7.62 at 1 hour, 8.03 at 24 hours, and 7.70 at 48 hours. Except for the liver, kidneys and lungs, concentrations in other organs were low. The new method for labeling Lipiodol with 188 Re is simple and has potential for the treatment of hepatic tumors. (author)

Formulation, radiopharmaceutical kinetics and dosimetry of the 188Re(V)-DMSA complex

International Nuclear Information System (INIS)

Garcia S, L.; Ferro F, G.; Murphy, C.A. de; Pedraza L, M.; Azorin N, J.

1999-01-01

It was developed through experimental design (ANOVA), a formulation to prepare the 188 Re(V)-Dmsa complex. Likewise, there were realized studies of radiopharmaceutical kinetics and internal dosimetry in animals, its normal and with induced tumors, considering an open bi compartmental model using the MIRD methodology. The 188 Re(V)-Dmsa complex was obtained with a radiochemical purity greater than 95% incubating 30 min at 90 Centigrade under the following formulation: [SnCl 2 ] = 1.4 mg/ml, [ascorbic acid] = 0.5 mg/ml, p H = 2.0 - 3.0. The stability test of the formulation, shows that after 48 h of its preparation, does not produce radiolytic degradation neither chemical decomposition. The radiopharmaceutical kinetics data show an average residence time 7.2h, velocity constant α = 0.6508h -1 and β = 0.1046 h -1 with an apparent distribution volume 6.9 l. The main elimination via was renal and it was observed osseous caption with an accumulated activity 522.049 ± 62 MBq h (residence time 14.1094 ± 1.69h). In according with the dosimetric calculations, by each 37 MBq injected, the equivalent dose at the tumor was 9.67± 0.33 Sv/g, for an effective dose 0.292 ± 0.0017 mSv/MBq. The images obtained in the gamma camera of the mice with induced tumors, show that do not have significant accumulation in the metabolic organs. The caption in bone and in tumors induced of the 188 Re(V)-Dmsa complex, show its potential for be used as a palliative agent for pain in patients with osseous metastasis and in the treatment of tumors of soft tissue. (Author)

Investigation on mechanical alloying process for v-cr-ti alloys

International Nuclear Information System (INIS)

Stanciulescu, M.; Carlan, P.; Mihalache, M.; Bucsa, G.; Abrudeanu, M.; Galateanu, A.

2015-01-01

Mechanical alloying (MA) is an efficient approach for fabricating oxide-dispersion alloys and structural materials including vanadium alloys for fusion and fission application. Dissolution behaviour of the alloying elements is a key issue for optimizing the mechanical alloying process in fabricating vanadium alloys. This paper studies the MA process of V-4wt.%Cr-4wt.%Ti alloy. The outcomes of the MA powders in a planetary ball mill are reported in terms of powder particle size and morphology evolution and elemental composition. The impact of spark-plasma sintering process on the mechanically alloyed powder is analysed. An optimal set of sintering parameters, including the maximum temperature, the dwell time and the heating rate are determined. (authors)

Laser surface alloying of aluminium-transition metal alloys

Directory of Open Access Journals (Sweden)

Almeida, A.

1998-04-01

Full Text Available Laser surface alloying has been used as a tool to produce hard and corrosion resistant Al-transition metal (TM alloys. Cr and Mo are particularly interesting alloying elements to produce stable highstrength alloys because they present low diffusion coefficients and solid solubility in Al. To produce Al-TM surface alloys a two-step laser process was developed: firstly, the material is alloyed using low scanning speed and secondly, the microstructure is modified by a refinement step. This process was used in the production of Al-Cr, Al-Mo and Al-Nb surface alloys by alloying Cr, Mo or Nb powder into an Al and 7175 Al alloy substrate using a CO₂ laser. This paper presents a review of the work that has been developed at Instituto Superior Tecnico on laser alloying of Al-TM alloys, over the last years.

En el presente trabajo se estudia la aleación superficial mediante láser de aluminio con metales de transición. El cromo y el molibdeno son particularmente interesantes porque producen aleaciones de alta resistencia y por el bajo coeficiente de difusión y solución sólida en aluminio. Para producir estas aleaciones se ha seguido un procedimiento desarrollado en dos partes. En primer lugar, el material se alea usando una baja velocidad de procesado y en segundo lugar la estructura se modifica mediante un refinamiento posterior. Este procedimiento se ha empleado en la producción de aleaciones Al-Cr, Al-Mo y Al-Nb mediante aleación con láser de CO₂ de polvos de Cr, Mo o Nb en aluminio y la aleación 7175. Este trabajo es una revisión del desarrollado en el Instituto Superior Técnico de Lisboa en los últimos años.

Therapeutic efficacy and dosimetric aspects of Rhenium-188-HEDP in bone pain palliation

International Nuclear Information System (INIS)

Liepe, Knut

2005-01-01

Full text: Bone metastases are a frequent complication of cancer, occurring in up 70% of patients suffering from advanced breast or prostate cancer and often present with severe bone pain. In this purpose the radionuclide therapy is a useful option for cancer patients. Different radionuclides are described, such as 89 Sr, 32 P, 153 Sm-EDTMP, 186 Re-HEDP, 131 I-BDP3, 90 Y, 117mSn-DTPA, 188 Re-HEDP and 188 Re-DMSA. The most experiences are available for 89 Sr. An indication for the treatment are patients with osteoblastic metastases, bone pain, sufficient bone marrow function and at least of three bone metastases visualized in bone scan. A bisphosphonate therapy, a chemotherapy with lower bone marrow toxicity or a local field external beam radiotherapy represent no contraindications, especially because the reported synergistic effects to the systemic radionuclide therapy. In 33 treated patients (breast and prostate cancer) we investigated the effect of 188 Re-HEDP on pain relief, analgesic intake and impairment of bone marrow function. There were an improvement on the Karnofsky performance scale from 74 7% to 85 9% 12 weeks after therapy (p= 0.001). The pain score showed a maximum decrease from 44 ± 18% to 27 ± 20% in the 3rd to the 8th week after therapy (p = .009) and 76% had a pain relief (20% were pain free). The maximal differences between the values of platelets and leukocytes before and after therapy were not statistically significant (p = 0.021 and p = 0.094). In 105 investigated patients treated with different radionuclides ( 89 Sr, 153 Sm-EDTMP, 186 Re-HEDP, 188 Re-HEDP and 89 Sr in combination with chemotherapy) no different therapeutic efficacy of the treatments were observed. In dose calculation of 188 Re-HEDP a radiation dose of 3.83 ± 2.01 mGy/MBq (12.6 Gy for 3300 MBq) for bone metastases and 0.61 ± 0.21 mGy/MBq (2 Gy for 3300 MBq) were found. With the introducing of radionuclide treatments with chemotherapy and repeated treatments, the

Synthesis, Characterization and Biological Studies of 99mTc and 188Re Peptides

Science.gov (United States)

Sanders, Vanessa

Radiopharmaceuticals are very powerful diagnostic tools for evaluation of a host of medical conditions. These drugs are labeled with radioactive isotopes, which are utilized to create pictures of areas of interest through absorption of the drug. They are currently in high demand due to their ability to image areas that traditional imaging devices cannot. The radioisotope 99mTc, with a half-life of 6.01 hours and a 140 keV gamma emission, is central to many radiopharmaceutical compounds. This isotope is easily obtained from a 99Mo-99mTc generator, through beta decay and column chromatography separations. Very little technetium, less than 6 ng, is needed to label the pharmaceuticals for use in-vivo. Another radioisotope 188Re is also important due to its ability to be used for therapy while being tracked throughout the body. Radiotherapy gives radiopharmaceuticals a huge advantage by their ability to destroy rapidly growing cells. One of the main reasons there is interest in rhenium pharmaceuticals is the chemical similarity between it and technetium. The 188Re isotope also has a considerably short half-life of approximately 17 hours and has emission energy of 155 keV. The 188Re isotope is separated from 188W-188Re generator, analogously to the 99Mo-99mTc generator. The ligand used in this work is a pentapepetide macrocyclic ligand. This ligand, KYCAR (lysyl-tyrosyl-cystyl-alanyl-arginine), has been designed as a potential chelating ligand for imaging and therapeutic in vivo agents. Ligands are chosen based on their in-situ biological behavior, and are used in the complexation with technetium and rhenium. Understanding and exploiting technetium and rhenium chemistry can provide insight into the reaction mechanisms and coordination chemistry of these compounds. The exploration of various oxidation states as a function of the ligands used and the reaction conditions can help develop novel radiopharmaceuticals. The investigations of the manipulation of oxidation states

The microstructure and creep behavior of cold rolled udimet 188 sheet.

Science.gov (United States)

Boehlert, C J; Longanbach, S C

2011-06-01

Udimet 188 was subjected to thermomechanical processing (TMP) in an attempt to understand the effects of cold-rolling deformation on the microstructure and tensile-creep behavior. Commercially available sheet was cold rolled to varying amounts of deformation (between 5-35% reduction in sheet thickness) followed by a solution treatment at 1,464 K (1,191 °C) for 1 h and subsequent air cooling. This sequence was repeated four times to induce a high-volume fraction of low-energy grain boundaries. The resultant microstructure was characterized using electron backscattered diffraction. The effect of the TMP treatment on the high-temperature [1,033-1,088 K (760-815 °C)] creep behavior was evaluated. The measured creep stress exponents (6.0-6.8) suggested that dislocation creep was dominant at 1,033 K (760 °C) for stresses ranging between 100-220 MPa. For stresses ranging between 25-100 MPa at 1,033 K (760 °C), the stress exponents (2.3-2.8) suggested grain boundary sliding was dominant. A significant amount of grain boundary cracking was observed both on the surface and subsurface of deformed samples. To assess the mechanisms of crack nucleation, in situ scanning electron microscopy was performed during the elevated-temperature tensile-creep deformation. Cracking occurred preferentially along general high-angle grain boundaries (GHAB) and less than 25% of the cracks were found on low-angle grain boundaries (LAB) and coincident site lattice boundaries (CSLB). Creep rupture experiments were performed at T = 1,088 K (815 °C) and σ = 165 MPa and the greatest average time-to-rupture was exhibited by the TMP sheet with the greatest fraction of LAB+CSLB. However, a clear correlation was not exhibited between the grain boundary character distribution and the minimum creep rates. The findings of this work suggest that although grain boundary engineering may be possible for this alloy, simply relating the fraction of grain boundary types to the creep resistance is not

Characteristics of mechanical alloying of Zn-Al-based alloys

International Nuclear Information System (INIS)

Zhu, Y.H.; Hong Kong Polytechnic; Perez Hernandez, A.; Lee, W.B.

2001-01-01

Three pure elemental powder mixtures of Zn-22%Al-18%Cu, Zn-5%Al-11%Cu, and Zn-27%Al-3%Cu (in wt.%) were mechanically alloyed by steel-ball milling processing. The mechanical alloying characteristics were investigated using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy techniques. It was explored that mechanical alloying started with the formation of phases from pure elemental powders, and this was followed by mechanical milling-induced phase transformation. During mechanical alloying, phases stable at the higher temperatures formed at the near room temperature of milling. Nano-structure Zn-Al-based alloys were produced by mechanical alloying. (orig.)

The Dresden in-stent restenosis radiation trial (DIRRT) with liquid-filled 188Re balloon

International Nuclear Information System (INIS)

Kropp, J.; Runge, R.R.; Reynen, K.; Koeckeritz, U.; Schmeisser, A.; Strasser, R.H.

2002-01-01

Full text: In some studies intracoronary radiation therapy (IRT) to minimize the restenosis rate after PTCA proved to be effective. We evaluated the performance, safety and effectiveness of IRT with 188 Re-perrhenate filled into a standard PTCA balloon. This kind of IRT allows a self-centering homogenous dose distribution to the vessel wall. 107 patients (pts) with a mean age of 63 years (81 m, 26 fin) with in-stent restenosis (type B in 39 %, type C in 61 %) and proven ischemia were included. After routine re-PTCA with or without additional stent implantation a second standard balloon was placed into the PTCA area and filled with β - -emitting liquid 188 Re at 3 atm. Irradiation time was 525 ± 167 sec to achieve a dose of 30 Gy at 0.5 mm depth of the vessel wall. In only one procedure there was a disconnection of the 188 Re containing system and the catheter but no contamination of the cath table or lab was measured. In 16 coronaries 21 stents were additionally implanted. In the follow-up 4 stent thromboses (1 day, 37 days, 2 x 6 months) with subsequent myocardial infarction were noticed, all in pts with additionally implanted stents. 57 pts had control angiography after 4 to 6 months after therapy and 41 after one year. Restenosis (stenosis > 50 % of luminal diameter) was shown in 9 out of 12 pts (75 %) with additionally implanted stents but only in 4 out of 24 pts (17 %) with PTCA alone. Reocclusion was noticed in 3 (25 %) pts with additional stent but only in 1 pt (4 %) without. No re-restenosis occurred in 20 patients which were without finding after 6 months. Intracoronary radiation therapy (IRT) with β - -emitting liquid-filled 188 Re balloon is a safe and effective therapy method which might be used routinely. Long-term results seem satisfactory in a patient group with in-stent restenosis and high risk of re-restenosis. But the positive effect of irradiation is abolished if an additional stent after PTCA is needed. (author)

Shape-coexistence and shape-evolution studies for bismuth isotopes by insource laser spectroscopy and $\\beta$-delayed fission in $^{188}$Bi

CERN Multimedia

The proposal aims at the two main goals: \\\\ \\\\1) the studies of shape-coexistence and shape-evolution phenomena in the long chain of bismuth isotopes (Z=83) by in-source laser spectroscopy measurements of isotopic shifts (IS) and hyperfine structures (hfs), and \\\\ 2) $\\beta$-delayed fission ($\\beta$DF) of two isomeric states in $^{188}$Bi. \\\\ \\\\Isomer-selective $\\beta$DF studies for $^{188m1, 188m2}$Bi isomers will enable us for the first time to investigate the spin-dependence of the $\\beta$DF process and to check theoretical predictions of asymmetrical fission fragment mass-distribution in this region of nuclei. The measurements will be performed with the well-proven Windmill and MR-TOF MS/Penning Trap techniques.

Use of new tandem cation/anion exchange system with clinical-scale generators provides high specific volume solutions of technetium-99m and rhenium-188

International Nuclear Information System (INIS)

Knapp, F.F. Jr.; Beets, A.L.; Mirzadeh, S.; Guhlke, S.

1998-01-01

In this paper we describe the first application of our simple and inexpensive post-elution tandem cation/anion exchange column system which is based on generator elution with salts of weak acids such as ammonium acetate instead of saline solution to provide very high specific volume solutions of technetium-99m and rhenium-188 from clinical-scale molybdenum-99/technetium-99m generator prepared from low specific activity (n,y) molybdenum-99, and tungsten-188/rhenium-188 generators, respectively. Initial passage of the bolus through a strong cation exchange cartridge converts the ammonium acetate to acetic acid which is essentially not ionized at the acidic pH, allowing specific subsequent amine-type (QMA SepPak TM ) anion exchange cartridge column trapping of the microscopic levels of the pertechnetate or perrhenate. Subsequent elution of the anion cartridge with a small volume ( 500 mCi/mL) from the alumina-based tungsten-188/rhenium-188 generator. (author)

Transarterial Re-188 labeled Lipiodol therapy in cases of inoperable hepatocellular carcinoma

International Nuclear Information System (INIS)

Kumar, Ajay; Pant, G.S.; Bandopadhyaya, G.P.; Bal, C.S.; Srivastava, D.N.; Acharya, S.K.; Pandey, G.K.; DattaGupta, S.; Sundaram, K.R.; Zanzonicog, Pat; Sundaram, Felix X.; Padhy, A.K.

2004-01-01

Full text: Most of the patients of hepatocellular carcinoma (HCC) present late with inoperable disease, cirrhosis of the liver and sometimes with portal vein thrombosis. In these circumstances, chemoembolisation is not possible. Similarly, if tumor is not accessible percutaneously, percutaneous ablative procedures are also ruled out. Such patients can be offered internal radionuclide therapy. In the internal radionuclide therapy, it is desirable to deliver the maximum possible radiation to the tumor, while protecting the critical organs such as normal liver parenchyma, lungs and the bone marrow (for which critical levels of radiation doses are predetermined as 30, 12 and 1.5 Gy, respectively). This is possible with individual dosimetry, by which radiation-absorbed dose/MBq to the various organs including the tumor is calculated and the 'maximum tolerated activity (MTA)', which can be safely administered to the patient, is estimated. However, this MTA should be able to deliver enough radiation to the tumor to ablate it completely (considered to be 80-100 Gy). We conducted trans-arterial Re-188 lipiodol therapy in patients with inoperable HCC after calculating MTA with individual dosimetry, in a multi-centric trial conducted by IAEA, and tried to evaluate whether calculated MTA could deliver tumoricidal radiation dose. With a transarterially injected scout dose (185 MBq) of Re-188, radiation absorbed dose to above mentioned organs including tumor were calculated in ten patients after acquiring planar gamma camera images, using conjugate view method (images taken up to 3 hrs post-injection along with a standard source) and performing first-order corrections for scatter (by taking images both in photopeak and scatter window) and attenuation (by taking a flood source and a transmission scan of the patents prior to the administration of Re-188). Images were acquired on gamma camera(Siemens-ORBITOR or GE- Millennium VG) with high/medium-energy collimator and radiation

Contributions to a systematic examination of deformed transition nuclei by the study of the decay of 188Tl and 190Tl

International Nuclear Information System (INIS)

Waetzig, W.

1980-01-01

Using the reaction 197 Au( 3 He,xn) Tl the decay of the nuclides 188 Tl and 190 Tl to 188 Hg (Tsub(1/2) = 70s) respectively to 190 Hg(Tsub(1/2) = 3.0 min) was studied at the mass separator ISOCELE of the Orsay-synchrocyclotron by gamma, conversion electron, gamma-gamma coincidence, and electron-gamma coincidence spectroscopy. The level schemes of 188 Hg and 190 Hg could be remarkably extended in comparison with earlier works. By a statistical analysis of the nuclear level density the nuclear temperature was calculated as a measure for the number of excitation modes of these nuclei. (orig./HSI) [de

Draft Genome Sequence of the Plant Growth–Promoting Rhizobacterium Acinetobacter radioresistens Strain SA188 Isolated from the Desert Plant Indigofera argentea

KAUST Repository

Lafi, Feras Fawzi; Alam, Intikhab; Bisseling, Ton; Geurts, Rene; Bajic, Vladimir B.; Hirt, Heribert; Saad, Maged

2017-01-01

Acinetobacter radioresistens strain SA188 is a plant endophytic bacterium, isolated from root nodules of the desert plants Indigofera spp., collected in Jizan, Saudi Arabia. Here, we report the 3.2-Mb draft genome sequence of strain SA188, highlighting characteristic pathways for plant growth–promoting activity and environmental adaptation.

Draft Genome Sequence of the Plant Growth–Promoting Rhizobacterium Acinetobacter radioresistens Strain SA188 Isolated from the Desert Plant Indigofera argentea

KAUST Repository

Lafi, Feras Fawzi

2017-03-03

Acinetobacter radioresistens strain SA188 is a plant endophytic bacterium, isolated from root nodules of the desert plants Indigofera spp., collected in Jizan, Saudi Arabia. Here, we report the 3.2-Mb draft genome sequence of strain SA188, highlighting characteristic pathways for plant growth–promoting activity and environmental adaptation.

Efficacy of Re-188-labelled sulphur colloid on prolongation of survival time in melanoma-bearing animals

International Nuclear Information System (INIS)

Chen, F.D.; Hsieh, B.T.; Wang, H.E.; Ou, Y.H.; Yang, W.K.; Whang-Peng, J.; Liu, R.S.; Knapp, F.F.; Ting, G.; Yen, S.H.

2001-01-01

In this study, the effectiveness of a 188 Re labeled sulfur colloid with two particle size ranges was used to evaluate the effectiveness of this agent on melanoma tumors in mice in terms of animal lifespan. Methods: Two separate group of animals were used for investigating biodistribution and survival time. A total of 188 B16F10-melanoma-bearing BDF 1 mice were injected intraperitoneally with 3.7 MBq (0.1mCi)/2mL of radiolabeled sulfur colloid ten days after intraperitoneal inoculation of 5x10 5 B16F10 melanoma cells/2ml. For group 1, 30 mice were sacrificed at 1, 4, 24, 48 and 72 hours for biodistribution studies. In group 2, 158 mice were divided into 9 groups (n=16∼18/groups)each receiving respectively tumor alone, tumor with normal saline, cold colloid or hot colloid with 16, 23, 31, 46, 62, or 124 MBq activity. Each of these colloid groups was further divided into two groups, one receiving smaller particle sizes ( 188 Re-sulfur colloid is an effective agent in controlling tumor cells in the abdominal cavity in animals

Preclinical evaluation of isostructural Tc-99m- and Re-188-folate-Gly-Gly-Cys-Glu for folate receptor-positive tumor targeting.

Science.gov (United States)

Kim, Woo Hyoung; Kim, Chang Guhn; Kim, Myoung Hyoun; Kim, Dae-Weung; Park, Cho Rong; Park, Ji Yong; Lee, Yun-Sang; Youn, Hyewon; Kang, Keon Wook; Jeong, Jae Min; Chung, June-Key

2016-06-01

The purpose of the present study was to prepare isostructural Tc-99m- and Re-188-folate-Gly-Gly-Cys-Glu (folate-GGCE), and to evaluate the feasibility of their use for folate receptor (FR)-targeted molecular imaging and as theranostic agents in a mouse tumor model. Folate-GGCE was synthesized using solid-phase peptide synthesis and radiolabeled with Tc-99m or Re-188. Radiochemical characterization was performed by radio-high-performance liquid chromatography. The biodistribution of Tc-99m-folate-GGCE was studied, with or without co-injection of excess free folate, in mice bearing both FR-positive (KB cell) and FR-negative (HT1080 cell) tumors. Biodistribution of Re-188-folate-GGCE was studied in mice bearing KB tumors. Serial planar scintigraphy was performed in the dual tumor mouse model after intravenous injection of Tc-99m-folate-GGCE. Serial micro-single photon emission computed tomography/computed tomography (SPECT/CT) studies were performed, with or without co-injection of excess free folate, in the mouse tumor model after injection of Tc-99m-folate-GGCE or Re-188-folate-GGCE. The radiolabeling efficiency and radiochemical stability of Tc-99m- and Re-188-folate-GGCE were more than 95 % for up to 4 h after radiolabeling. Uptake of Tc-99m-folate-GGCE at 1, 2, and 4 h after injection in KB tumor was 16.4, 23.2, and 17.6 % injected dose per gram (%ID/g), respectively. This uptake was suppressed by 97.4 % when excess free folate was co-administered. Tumor:normal organ ratios at 4 h for blood, liver, lung, muscle, and kidney were 54.3, 25.2, 38.3, 97.8, and 0.3, respectively. Tumor uptake of Re-188-folate-GGCE at 2, 4, 8, and 16 h after injection was 17.4, 21.7, 24.1, and 15.6 %ID/g, respectively. Tumor:normal organ ratios at 8 h for blood, liver, lung, muscle, and kidney were 126.8, 21.9, 54.8, 80.3, and 0.4, respectively. KB tumors were clearly visualized at a high intensity using serial scintigraphy and micro-SPECT/CT in mice injected with Tc-99m- or Re

Pharmacokinetic properties of new antitumor radiopharmaceutical on the basis of diamond nanoporous composites labeled with rhenium-188

International Nuclear Information System (INIS)

Petriev, V M; Tishchenko, V K; Kuril’chik, A A; Skvortsov, V G

2017-01-01

Today the development of address therapeutic radionuclide delivery systems directly to tumor tissue is of current interest. It can be achieved by the design of drug containers of specific sizes and shapes from carbon-based composite materials. It will be allowed to enhance the efficacy of anticancer therapy and avoid serious side effects. In this work we studied the pharmacokinetic properties of nanodiamond nanoporous composite labeled with rhenium-188 in rats with hepatocholangioma PC-1 after intratumoral injection. It was established that substantial part of injected radioactivity remained in tumor tissue. Within three hours after 188 Re-nanoporous composites injection activity in tumor constituted 79.1–91.3% of injected dose (ID). Then activity level declined to 45.9% ID at 120 hours. No more than 1.34% ID entered the bloodstream. In soft organs and tissues, except thyroid gland, the content of compound didn’t exceed 0.3% ID/g. The highest activity in thyroid gland was 6.95% ID/g. In conclusion, received results suggest 188 Re-nanoporous composites can be promising radionuclide delivery systems for cancer treatment. (paper)

S values at voxels level for 188Re and 90Y calculated with the MCNP-4C code

International Nuclear Information System (INIS)

Coca, M.A.; Torres, L.A.; Cornejo, N.; Martin, G.

2008-01-01

Full text: MIRD formalism at voxel level has been suggested as an optional methodology to perform internal radiation dosimetry calculation during internal radiation therapy in Nuclear Medicine. Voxel S values for Y 90 , 131 I, 32 P, 99m Tc and 89 Sr have been published to different sizes. Currently, 188 Re has been proposed as a promising radionuclide for therapy due to its physical features and availability from generators. The main objective of this work was to estimate the voxel S values for 188 Re at cubical geometry using the MCNP-4C code for the simulations of radiation transport and energy deposition. Mean absorbed dose to target voxels per radioactive decay in a source voxel were estimated and reported for 188 Re and Y 90 . A comparison of voxel S values computed with the MCNP code and the data reported in MIRD Pamphlet 17 for 90 Y was performed in order to evaluate our results. (author)

Photoluminescence of heterostructures with GaP1−xNx and GaP1−x−yNxAsy layers grown on GaP and Si substrates by molecular-beam epitaxy

International Nuclear Information System (INIS)

Lazarenko, A. A.; Nikitina, E. V.; Sobolev, M. S.; Pirogov, E. V.; Denisov, D. V.; Egorov, A. Yu.

2015-01-01

The structural and optical properties of heterostructures containing GaP 1−x N x ternary and GaP 1−x−y N x As y quaternary alloy layers are discussed. The heterostructures are grown by molecular-beam epitaxy on GaP and Si substrates. The structures are studied by the high-resolution X-ray diffraction technique and photoluminescence measurements in a wide temperature range from 10 to 300 K. In the low-temperature photoluminescence spectra of the alloys with a low nitrogen fraction (x < 0.007), two clearly resolved narrow lines attributed to the localized states of nitrogen pairs and the phonon replicas of these lines are observed

Application of mechanical alloying to synthesis of intermetallic phases based alloys

International Nuclear Information System (INIS)

Dymek, S.

2001-01-01

Mechanical alloying is the process of synthesis of powder materials during milling in high energetic mills, usually ball mills. The central event in mechanical alloying is the ball-powder-ball collision. Powder particles are trapped between the colliding balls during milling and undergo deformation and/or fracture. Fractured parts are cold welded. The continued fracture and cold welding results in a uniform size and chemical composition of powder particles. The main applications of mechanical alloying are: processing of ODS alloys, syntheses of intermetallic phases, synthesis of nonequilibrium structures (amorphous alloys, extended solid solutions, nanocrystalline, quasi crystals) and magnetic materials. The present paper deals with application of mechanical alloying to synthesis Ni A l base intermetallic phases as well as phases from the Nb-Al binary system. The alloy were processed from elemental powders. The course of milling was monitored by scanning electron microscopy and X-ray diffraction. After milling, the collected powders were sieved by 45 μm grid and hot pressed (Nb alloys and NiAl) or hot extruded (NiAl). The resulting material was fully dense and exhibited fine grain (< 1 μm) and uniform distribution of oxide dispersoid. The consolidated material was compression and creep tested. The mechanical properties of mechanically alloys were superior to properties of their cast counterparts both in the room and elevated temperatures. Higher strength of mechanically alloyed materials results from their fine grains and from the presence of dispersoid. At elevated temperatures, the Nb-Al alloys have higher compression strength than NiAl-based alloys processed at the same conditions. The minimum creep rates of mechanically alloyed Nb alloys are an order of magnitude lower than analogously processed NiAl-base alloys. (author)

Young stars in the old galactic cluster NGC 188

International Nuclear Information System (INIS)

Veer, F. van 't

1984-01-01

We first briefly discuss the age of the oldest known galactic clusters, according to recently published determinations. The now definitely established membership of our W UMa type contact binaries in this cluster is difficult to understand if the age of these stars is that of the cluster. It appears therefore that these binaries are much younger and that the several episodes of star formation took place in NGC 188. This conclusion is reached after a new study of the mean density of the four contact binaries and a critical discussion of the chemical composition and the mixing length parameter. (orig.)

Use of a new tandem cation/anion exchange system with clinical-scale generators provides high specific volume solutions of technetium-99m and rhenium-188

International Nuclear Information System (INIS)

Knapp, F.R. Jr.; Beets, A.L.; Mirzadeh, S.; Guhlke, S.; Univ. of Bonn

1998-03-01

In this paper the authors describe the first application of a simple and inexpensive post elution tandem cation-anion exchange column system which is based on generator elution with salts of weak acids such as ammonium acetate instead of saline solution to provide very high specific volume solutions of technetium-99m and rhenium-188 from clinical scale molybdenum-99/technetium-99m generator prepared from low specific activity (n,y) molybdenum-99, and tungsten-188/rhenium-188 generators, respectively. Initial passage of the bolus through a strong cation exchange cartridge converts the ammonium acetate to acetic acid which is essentially not ionized at the acidic pH, allowing specific subsequent amine type (QMA SepPak trademark) anion exchange cartridge column trapping of the microscopic levels of the pertechnetate or perrhenate. Subsequent elution of the anion cartridge with a small volume ( 500 mCi/mL) from the alumina-based tungsten-188/rhenium-188 generator

S values at voxels level for 188Re and 90Y calculated with the MCNP-4C code

International Nuclear Information System (INIS)

Coca Perez, Marco Antonio; Torres Aroche, Leonel Alberto; Cornejo, Nestor; Martin Hernandez, Guido

2003-01-01

The main objective of this work was estimate the voxels S values for 188 Re at cubical geometry using the MCNP-4C code for the simulation of radiation transport and energy deposition. Mean absorbed dose to target voxels per radioactive decay in a source voxels were estimated and reported for 188 Re and Y 90 . A comparison of voxels S values computed with the MCNP code the data reported in MIRD pamphlet 17 for 90 Y was performed in order to evaluate our results

Treatment with rhenium-188-perrhenate and iodine-131 of NIS-expressing mammary cancer in a mouse model remarkably inhibited tumor growth

International Nuclear Information System (INIS)

Dadachova, Ekaterina; Nguyen, Andrew; Lin, Elaine Y.; Gnatovskiy, Leo; Lu, Ping; Pollard, Jeffrey W.

2005-01-01

Introduction: Novel therapeutic modalities are needed for breast cancer patients in whom standard treatments are not effective. Mammary gland sodium/iodide symporter has been identified as a molecular target in breast cancers in humans and in some transgenic mouse models. We report the results of a therapy study with 131 I - and 188 ReO 4 - of breast cancer in polyoma middle T oncoprotein (PyMT) transgenic mice endogenously expressing the Na + /I - symporter (NIS). Methods: PyMT mice (12-13 weeks old) with one palpable tumor of 0.5-0.8 cm in diameter were used. For the therapy studies, PyMT mice were (1) treated with two intraperitoneal injections of 1.5 mCi of 188 ReO 4 - 1 week apart, (2) pretreated for 1 week with 5 μg of triiodothyronine (T3) followed by two intraperitoneal injections of 1.5 mCi of 131 I - 1 week apart or (3) left untreated. The tumor and normal organ uptakes were assessed by scintigraphic imaging. The thyroid function of treated and control animals was evaluated at the completion of the study by measuring the T3/thyroxine (T4) ratio in their blood. Results: There was significant uptake of 131 I - and 188 ReO 4 - in the primary palpable tumors as well as in nonpalpable tumors, stomachs and thyroids. The tumor uptake after the second injection was 10 times lower in comparison with the first injection. Tumor growth was significantly inhibited in both the 131 I - and 188 ReO 4 - groups in comparison with the control group, and tumors in the 188 ReO 4 - group increased in size significantly less than in the 131 I - group. The T3/T4 ratios were calculated to be 27 and 25 for the control group and the 188 ReO 4 - group, respectively; for 131 I - , both the T3 and T4 levels were below detection limit, demonstrating much less effect on the thyroids of treatment with 188 ReO 4 - than with 131 I - . Conclusions: These results prove that NIS expression in breast tumors in animal models allows specific, efficient and safe treatment with a variety of

Effect of Cr, Ti, V, and Zr Micro-additions on Microstructure and Mechanical Properties of the Al-Si-Cu-Mg Cast Alloy

Science.gov (United States)

Shaha, S. K.; Czerwinski, F.; Kasprzak, W.; Friedman, J.; Chen, D. L.

2016-05-01

Uniaxial static and cyclic tests were used to assess the role of Cr, Ti, V, and Zr additions on properties of the Al-7Si-1Cu-0.5Mg (wt pct) alloy in as-cast and T6 heat-treated conditions. The microstructure of the as-cast alloy consisted of α-Al, eutectic Si, and Cu-, Mg-, and Fe-rich phases Al2.1Cu, Al8.5Si2.4Cu, Al5.2CuMg4Si5.1, and Al14Si7.1FeMg3.3. In addition, the micro-sized Cr/Zr/Ti/V-rich phases Al10.7SiTi3.6, Al6.7Si1.2TiZr1.8, Al21.4Si3.4Ti4.7VZr1.8, Al18.5Si7.3Cr2.6V, Al7.9Si8.5Cr6.8V4.1Ti, Al6.3Si23.2FeCr9.2V1.6Ti1.3, Al92.2Si16.7Fe7.6Cr8.3V1.8, and Al8.2Si30.1Fe1.6Cr18.8V3.3Ti2.9Zr were present. During solution treatment, Cu-rich phases were completely dissolved, while the eutectic silicon, Fe-, and Cr/Zr/Ti/V-rich intermetallics experienced only partial dissolution. Micro-additions of Cr, Zr, Ti, and V positively affected the alloy strength. The modified alloy in the T6 temper during uniaxial tensile tests exhibited yield strength of 289 MPa and ultimate tensile strength of 342 MPa, being significantly higher than that for the Al-Si-Cu-Mg base. Besides, the cyclic yield stress of the modified alloy in the T6 state increased by 23 pct over that of the base alloy. The fatigue life of the modified alloy was substantially longer than that of the base alloy tested using the same parameters. The role of Cr, Ti, V, and Zr containing phases in controlling the alloy fracture during static and cyclic loading is discussed.

Radiation absorbed doses in the event of balloon rupture (BR) during endovascular brachytherapy (EB) using 188Re-perrhenate

International Nuclear Information System (INIS)

Angelides, S.; Hetherington, E.; Karolis, C.; Walker, B.; Jackson, T.; Knittel, T.; Friend, C.; Pitney, M.; Jepson, N.; Milross, C.; Lonergan, D.

2000-01-01

Full text: endovascular brachytherapy (EB) using liquid or solid radiation sources, is an effective emerging therapy for coronary artery disease. Liquid sources provide uniform radiation dose to the vessel wall. However the radiation burden in the unlikely event of BR is not insignificant. The aims of this study were to determine i) absorbed dose for various 188 Re radiopharmaceuticals in the event of BR, and ii) effects of thyroid uptake blocking agent, Lugol's iodine (Ll) and/or bladder catheterisation (BC). Dose calculations were based on MIRDOSE 3.1 with dynamic bladder model and MIRD Dose Estimate Report No.8 for 99 Tc m -pertechnetate, which has similar biokinetic properties to 188 Re-perrhenate. Normal renal function and a bladder voiding interval of 4.8h (1 minute with catheter) were assumed. BR was simulated ex-vivo by puncturing a Solaris angioplasty balloon filled with normal saline at 4 atm. LI, MAG3 and DTPA substantially reduces the radiation dose following BR, particularly to the thyroid, and BC reduces the bladder wall dose. Only the contents of the balloon leaked; 0.4 ml of the total volume of 1.8ml. As binding of 188 Re to ligands is cumbersome, we opted to use LI. Twenty five patients with in-stent re-stenosis have been treated using 188 Re-perrhenate (8 GBq/ml), with no BR. Copyright (2000) The Australian and New Zealand Society of Nuclear Medicine Inc

Instability of buried hydration sites increases protein subdomains fluctuations in the human prion protein by the pathogenic mutation T188R

Directory of Open Access Journals (Sweden)

Katsufumi Tomobe

2016-05-01

Full Text Available The conformational change from the cellular prion protein (PrPc to scrapie prion protein (PrPsc is a key process in prion diseases. The prion protein has buried water molecules which significantly contribute to the stability of the protein; however, there has been no report investigating the influence on the buried hydration sites by a pathogenic mutation not adjacent to the buried hydration sites. Here, we perform molecular dynamics simulations of wild type (WT PrPc and pathogenic point mutant T188R to investigate conformational changes and the buried hydration sites. In WT-PrPc, four buried hydration sites are identified by residence time and rotational relaxation analysis. However, there are no stable buried hydration sites in one of T188R simulations, which indicates that T188R sometimes makes the buried hydration sites fragile. We also find that fluctuations of subdomains S1-H1-S2 and H1-H2 increase in T188R when the buried hydration sites become unstable. Since the side chain of arginine which is replaced from threonine in T188R is larger than of threonine, the side chain cannot be embedded in the protein, which is one of the causes of the instability of subdomains. These results show correlations between the buried hydration sites and the mutation which is far from them, and provide a possible explanation for the instability by mutation.

Instability of buried hydration sites increases protein subdomains fluctuations in the human prion protein by the pathogenic mutation T188R

Science.gov (United States)

Tomobe, Katsufumi; Yamamoto, Eiji; Akimoto, Takuma; Yasui, Masato; Yasuoka, Kenji

2016-05-01

The conformational change from the cellular prion protein (PrPc) to scrapie prion protein (PrPsc) is a key process in prion diseases. The prion protein has buried water molecules which significantly contribute to the stability of the protein; however, there has been no report investigating the influence on the buried hydration sites by a pathogenic mutation not adjacent to the buried hydration sites. Here, we perform molecular dynamics simulations of wild type (WT) PrPc and pathogenic point mutant T188R to investigate conformational changes and the buried hydration sites. In WT-PrPc, four buried hydration sites are identified by residence time and rotational relaxation analysis. However, there are no stable buried hydration sites in one of T188R simulations, which indicates that T188R sometimes makes the buried hydration sites fragile. We also find that fluctuations of subdomains S1-H1-S2 and H1-H2 increase in T188R when the buried hydration sites become unstable. Since the side chain of arginine which is replaced from threonine in T188R is larger than of threonine, the side chain cannot be embedded in the protein, which is one of the causes of the instability of subdomains. These results show correlations between the buried hydration sites and the mutation which is far from them, and provide a possible explanation for the instability by mutation.

Surface modification of 5083 Al alloy by electrical discharge alloying processing with a 75 mass% Si-Fe alloy electrode

Energy Technology Data Exchange (ETDEWEB)

Stambekova, Kuralay [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Rd., Taichung 40227, Taiwan (China); Lin, Hung-Mao [Department of Mechanical Engineering, Far East University, No. 49, Zhonghua Rd., Xinshi Dist., Tainan City 74448, Taiwan (China); Uan, Jun-Yen, E-mail: jyuan@dragon.nchu.edu.tw [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Rd., Taichung 40227, Taiwan (China)

2012-03-01

This study experimentally investigates the surface modification of 5083 Al alloy by the electrical discharge alloying (EDA) process with a Si-Fe alloy as an electrode. Samples were analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), micro-hardness and corrosion resistance tests. The micro-hardness of EDA alloyed layer was evidently higher than that of the base metal (5083 Al alloy). The TEM results show that the matrix of the alloyed layer has an amorphous-like structure; the matrix contains fine needle-like Si particles, block-like Si particles and nano-size Al{sub 4.5}FeSi and Al{sub 13}Fe{sub 4} particles. The TEM results support experimental results for the high hardness of the alloyed layer. Moreover, the EDA alloyed layer with composite microstructures has good corrosion resistance in NaCl aqueous solution.

Synthesis Of NiCrAlC alloys by mechanical alloying

International Nuclear Information System (INIS)

Silva, A.K.; Pereira, J.I.; Vurobi Junior, S.; Cintho, O.M.

2010-01-01

The purpose of the present paper is the synthesis of nickel alloys (NiCrAlC), which has been proposed like a economic alternative to the Stellite family Co alloys using mechanical alloying, followed by sintering heat treatment of milled material. The NiCrAlC alloys consist of a chromium carbides dispersion in a Ni 3 Al intermetallic matrix, that is easily synthesized by mechanical alloying. The use of mechanical alloying enables higher carbides sizes and distribution control in the matrix during sintering. We are also investigated the compaction of the processed materials by compressibility curves. The milling products were characterized by X-ray diffraction, and the end product was featured by conventional metallography and scanning electronic microscopy (SEM), that enabled the identification of desired phases, beyond microhardness test, which has been shown comparable to alloys manufactured by fusion after heat treating. (author)

Preliminary studies with 188Rhenium-tin colloid for radiation synovectomy: preparation, size determination, in vivo distribution, effects and dosimetry studies

International Nuclear Information System (INIS)

Mathe, D.; Balogh, L.; Polyak, A.; Kiraly, R.; Andocs, G.; Janoki, G. A.; Chaudhari, P.R.; Perge, E.; Glavits, R.

2002-01-01

Generator-produced beta-emitting radionuclides such 188R e are gaining in importance for radiosynoviorthesis because of their availability on a regular basis. We prepared a 188 Re-tin colloid in reaction carried out either at 100 o C or at room temperature (RT). The size of the colloid particles was measured with a laser light-scattering method, and their biodistribution, dosimetric aspects and therapeutic effects were studied in an antigen-induced arthritis (AIA) model in rabbits. 188R e-tin colloid solution was injected intraarticularly into the knee joints of rabbits with AIA and imaging studies were performed. Blood samples were collected post injection for estimation of the blood residence time. We also injected 2 intact rabbits in the same manner with 188R e perrhenate solution in order to observe its effects and distribution in the body. All the treated rabbit knees were subjected to histopathology.The colloid particle size distribution was different after preparation at the different reaction temperatures, with a more suitable mean of 4.53 μm in the RT preparation. The dose delivered to the synovial surface was between 3.51 and 4.21 Gy and that to the bone surface was between 0.70 and 0.84 Gy. Histopathologic examination revealed the development of fibrous connective tissue in the AIA knees 4 weeks after treatment, but not in the control group. The 188R e-tin colloid preparation used in study was suitable for radiation synovectomy application. It requires modifications in the preparation protocol so as to increase the labelling efficiency in correlation with an appropriate particle size. (author)

Correlation between diffusion barriers and alloying energy in binary alloys

DEFF Research Database (Denmark)

Vej-Hansen, Ulrik Grønbjerg; Rossmeisl, Jan; Stephens, Ifan

2016-01-01

In this paper, we explore the notion that a negative alloying energy may act as a descriptor for long term stability of Pt-alloys as cathode catalysts in low temperature fuel cells.......In this paper, we explore the notion that a negative alloying energy may act as a descriptor for long term stability of Pt-alloys as cathode catalysts in low temperature fuel cells....

Studies on the preparation and isomeric composition of [sup 186]Re- and [sup 188]Re-pentavalent rhenium dimercaptosuccinic acid complex

Energy Technology Data Exchange (ETDEWEB)

Singh, J. (Canterbury Univ. (United Kingdom). Biological Lab.); Reghebi, K.; Lazarus, C.R.; Clarke, S.E.M. (Guy' s Hospital, London (United Kingdom)); Callahan, A.P.; Knapp, F.F. Jr. (Oak Ridge National Lab., TN (United States)); Blower, P.J. (Kent and Canterbury Hospital (United Kingdom))

1993-03-01

The preparative conditions for [sup 186]Re(V)DMSA and [sup 188]Re(V)DMSA (DMSA = meso-dimercaptosuccinic acid), [beta]-emitting radiopharmaceuticals that have been shown to localize in medullary thyroid carcinoma, require modification depending on the amount of carrier rhenium and the chemical form and medium in which the rhenium is supplied. Preparative conditions are described for use with carrier-free [sup 188]ReO[sub 4][sup -] in saline, and for use with [sup 186]ReO[sub 4][sup -] in saline, sodium hydroxide or nitric acid. Preparation of [sup 186]Re(V)DMSA (carrier present up to 2 mg per 2.5 ml reaction volume) requires a DMSA:SnCl[sub 2]:Re ratio of 10:5:1 at 100[sup o]C for 30 min. Addition of excess nitric acid or hydrochloric acid up to a concentration of 155 mM does not reduce the yield from 100%. A commercial DMSA kit vial (e.g. Amerscan DMSA) can be used for preparation of [sup 188]Re(V)DMSA (carrier free) provided the required is in a volume of less than 1 ml per vial. A convenient method of concentrating the [sup 188]Re generator eluate to the required volume is described. (Author).

Titanium alloys. Advances in alloys, processes, products and applications

International Nuclear Information System (INIS)

Blenkinsop, P.A.

1993-01-01

The last few years have been a period of consolidation of existing alloys and processes. While the aerospace industry remains the principal driving force for alloy development, the paper illustrates examples of new markets being established in 'older' alloys, by a combination of product/process development and a re-examination of engineering design parameters. Considerable attention is still being directed towards the titanium aluminide systems, but other more conventional alloy developments are underway aimed at specific engineering and process requirements, both in the aerospace and non-aerospace sectors. Both the advanced high temperature and conventional alloy developments are considered, before the paper goes on to assess the potential of new processes and products, like spray-forming, metal matrix composites and shaped-plate rolling. (orig.)

High-temperature deformation of a mechanically alloyed niobium-yttria alloy

International Nuclear Information System (INIS)

Chou, I.; Koss, D.A.; Howell, P.R.; Ramani, A.S.

1997-01-01

Mechanical alloying (MA) and hot isostatic pressing have been used to process two Nb alloys containing yttria particles, Nb-2 vol.%Y 2 O 3 and Nb-10 vol.%Y 2 O 3 . Similar to some thermomechanically processed nickel-based alloys, both alloys exhibit partially recrystallized microstructures, consisting of a 'necklace' of small recrystallized grains surrounding much larger but isolated, unrecrystallized, cold-worked grains. Hot compression tests from 1049 to 1347 C (0.5-0.6T MP ) of the 10% Y 2 O 3 alloy show that MA material possesses a much higher yield and creep strength than its powder-blended, fully recrystallized counterpart. In fact, the density-compensated specific yield strength of the MA Nb-10Y 2 O 3 exceeds that of currently available commercial Nb alloys. (orig.)

Development of radiolabeling procedures of bioconjugates with 135Sm and 186-188 Re: In-vitro and in-vivo studies

International Nuclear Information System (INIS)

Gomez de Castiglia, S.

2000-01-01

Mercaptoacetyltriglycine (MAG3) is a compound that has been extensively used in nuclear medicine as a prosthetic group, following carbodiimide activation, for labeling antibodies with 99m Tc and also 188 Re. MAG3 and related derivatives are attractive ligands for coupling to biomolecules in that they provide very stable complexes. The aim of this project is to label biomolecules with 188 Re using an active ester of the MAG3. The labeled chelating agent was conjugated with a biotin derivative and with the Polyclonal Immunoglobulin IgG (Sandoz). During this multistep procedure an active ester of tetrafluorophenol and MAG3 carrying the radioisotope is prepared, which is subsequently conjugated to amino groups of the biomolecule. Of the commercially available biotin derivatives we used biocytin which contains a free amino group for conjugation to MAG3 via the MAG3TFP ester. Another derivative DTPA-biocytinamide (DB2) was also labeled with 188 Re. Quality assurance tests were performed on the final preparation of the radiolabeled biomolecules

Iron-based amorphous alloys and methods of synthesizing iron-based amorphous alloys

Science.gov (United States)

Saw, Cheng Kiong; Bauer, William A.; Choi, Jor-Shan; Day, Dan; Farmer, Joseph C.

2016-05-03

A method according to one embodiment includes combining an amorphous iron-based alloy and at least one metal selected from a group consisting of molybdenum, chromium, tungsten, boron, gadolinium, nickel phosphorous, yttrium, and alloys thereof to form a mixture, wherein the at least one metal is present in the mixture from about 5 atomic percent (at %) to about 55 at %; and ball milling the mixture at least until an amorphous alloy of the iron-based alloy and the at least one metal is formed. Several amorphous iron-based metal alloys are also presented, including corrosion-resistant amorphous iron-based metal alloys and radiation-shielding amorphous iron-based metal alloys.

Bayesian investigation of isochrone consistency using the old open cluster NGC 188

Energy Technology Data Exchange (ETDEWEB)

Hills, Shane; Courteau, Stéphane [Department of Physics, Engineering Physics and Astronomy, Queen’s University, Kingston, ON K7L 3N6 Canada (Canada); Von Hippel, Ted [Department of Physical Sciences, Embry-Riddle Aeronautical University, Daytona Beach, FL 32114 (United States); Geller, Aaron M., E-mail: shane.hills@queensu.ca, E-mail: courteau@astro.queensu.ca, E-mail: ted.vonhippel@erau.edu, E-mail: a-geller@northwestern.edu [Center for Interdisciplinary Exploration and Research in Astrophysics (CIERA) and Department of Physics and Astronomy, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States)

2015-03-01

This paper provides a detailed comparison of the differences in parameters derived for a star cluster from its color–magnitude diagrams (CMDs) depending on the filters and models used. We examine the consistency and reliability of fitting three widely used stellar evolution models to 15 combinations of optical and near-IR photometry for the old open cluster NGC 188. The optical filter response curves match those of theoretical systems and are thus not the source of fit inconsistencies. NGC 188 is ideally suited to this study thanks to a wide variety of high-quality photometry and available proper motions and radial velocities that enable us to remove non-cluster members and many binaries. Our Bayesian fitting technique yields inferred values of age, metallicity, distance modulus, and absorption as a function of the photometric band combinations and stellar models. We show that the historically favored three-band combinations of UBV and VRI can be meaningfully inconsistent with each other and with longer baseline data sets such as UBVRIJHK{sub S}. Differences among model sets can also be substantial. For instance, fitting Yi et al. (2001) and Dotter et al. (2008) models to UBVRIJHK{sub S} photometry for NGC 188 yields the following cluster parameters: age = (5.78 ± 0.03, 6.45 ± 0.04) Gyr, [Fe/H] = (+0.125 ± 0.003, −0.077 ± 0.003) dex, (m−M){sub V} = (11.441 ± 0.007, 11.525 ± 0.005) mag, and A{sub V} = (0.162 ± 0.003, 0.236 ± 0.003) mag, respectively. Within the formal fitting errors, these two fits are substantially and statistically different. Such differences among fits using different filters and models are a cautionary tale regarding our current ability to fit star cluster CMDs. Additional modeling of this kind, with more models and star clusters, and future Gaia parallaxes are critical for isolating and quantifying the most relevant uncertainties in stellar evolutionary models.

Short period strain balanced gallium arsenide nitride/indium arsenide nitride superlattice lattice matched to indium phosphide for mid-infrared photovoltaics

Science.gov (United States)

Bhusal, Lekhnath

Dilute nitrogen-containing III-V-N alloys have been intensively studied for their unusual electronic and optical behavior in the presence of a small amount of nitrogen. Those behaviors can further be manipulated, with a careful consideration of the strain and strain balancing, for example, in the context of a strain-balanced superlattice (SL) based on those alloys. In this work, the k.p approximation and the band anti-crossing model modified for the strain have been used to describe the electronic states of the strained bulk-like GaAs1-xNx and InAs 1-yNy ternaries in the vicinity of the center of the Brillouin zone (Gamma-point). Band-offsets between the conduction and valence bands of GaAs1-xNx and InAs1-yN y have also been evaluated, before implementing them into the SL structure. By minimizing the total mechanical energy of the stack of the alternating layers of GaAs1-xNx and InAs1-yNy in the SL, the ratio of the thicknesses of the epilayers is determined to make the structure lattice-matching on the InP(001), through the strain-balancing. Mini-band energies of the strain-balanced GaAs1-xNx/InAs 1-yNy short-period SL on InP(001) is then investigated using the transfer matrix formalism. This enabled identifying the evolution of the band edge transition energies of the superlattice structure for different nitrogen compositions. Results show the potential of the new proposed design to exceed the existing limits of bulk-like InGaAsN alloys and offer the applications for photon absorption/emission energies in the range of ~0.65-0.35eV at 300K for a typical nitrogen composition of ≤5%. The optical absorption coefficient of such a SL is then estimated under the anisotropic medium approximation, where the optical absorption of the bulk structure is modified according to the anisotropy imposed by the periodic potential in the growth direction. As an application, the developed SL structure is used to investigate the performance of double, triple and quadruple junction

High strength alloys

Science.gov (United States)

Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

2010-08-31

High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

Treatment with rhenium-188-perrhenate and iodine-131 of NIS-expressing mammary cancer in a mouse model remarkably inhibited tumor growth

Energy Technology Data Exchange (ETDEWEB)

Dadachova, Ekaterina [Department of Nuclear Medicine, Albert Einstein College of Medicine, Bronx, NY 10461 (United States)]. E-mail: edadacho@aecom.yu.edu; Nguyen, Andrew [Department of Microbiology and Immunology, Albert Einstein College of Medicine, Bronx, NY 10461 (United States); Lin, Elaine Y. [Department of Developmental and Molecular Biology, Albert Einstein College of Medicine, Bronx, NY 10461 (United States); Gnatovskiy, Leo [Department of Developmental and Molecular Biology, Albert Einstein College of Medicine, Bronx, NY 10461 (United States); Lu, Ping [Department of Nuclear Medicine, Albert Einstein College of Medicine, Bronx, NY 10461 (United States); Pollard, Jeffrey W. [Department of Developmental and Molecular Biology, Albert Einstein College of Medicine, Bronx, NY 10461 (United States)

2005-10-01

Introduction: Novel therapeutic modalities are needed for breast cancer patients in whom standard treatments are not effective. Mammary gland sodium/iodide symporter has been identified as a molecular target in breast cancers in humans and in some transgenic mouse models. We report the results of a therapy study with {sup 131}I{sup -} and {sup 188}ReO{sub 4} {sup -} of breast cancer in polyoma middle T oncoprotein (PyMT) transgenic mice endogenously expressing the Na{sup +}/I{sup -} symporter (NIS). Methods: PyMT mice (12-13 weeks old) with one palpable tumor of 0.5-0.8 cm in diameter were used. For the therapy studies, PyMT mice were (1) treated with two intraperitoneal injections of 1.5 mCi of {sup 188}ReO{sub 4} {sup -} 1 week apart, (2) pretreated for 1 week with 5 {mu}g of triiodothyronine (T3) followed by two intraperitoneal injections of 1.5 mCi of {sup 131}I{sup -} 1 week apart or (3) left untreated. The tumor and normal organ uptakes were assessed by scintigraphic imaging. The thyroid function of treated and control animals was evaluated at the completion of the study by measuring the T3/thyroxine (T4) ratio in their blood. Results: There was significant uptake of {sup 131}I{sup -} and {sup 188}ReO{sub 4} {sup -} in the primary palpable tumors as well as in nonpalpable tumors, stomachs and thyroids. The tumor uptake after the second injection was 10 times lower in comparison with the first injection. Tumor growth was significantly inhibited in both the {sup 131}I{sup -} and {sup 188}ReO{sub 4} {sup -} groups in comparison with the control group, and tumors in the {sup 188}ReO{sub 4} {sup -} group increased in size significantly less than in the {sup 131}I{sup -} group. The T3/T4 ratios were calculated to be 27 and 25 for the control group and the {sup 188}ReO{sub 4} {sup -} group, respectively; for {sup 131}I{sup -}, both the T3 and T4 levels were below detection limit, demonstrating much less effect on the thyroids of treatment with {sup 188}ReO{sub 4

Role of 188Re(V)DMSA in the diagnosis and therapy of medullary thyroid carcinoma: a pilot study in an animal model

International Nuclear Information System (INIS)

Learoyd, D.L.; Roach, P.J.; Snowdon, G.M.; Dadachova, K.; Moreau, A.M.; Robinson, B.G.

1999-01-01

Full text: 99 Tc m (V)DMSA has been reported to be highly sensitive in the diagnosis of medullary thyroid cancer (MTC). Rhenium-188, a beta emitter, has potential for therapy of MTC. However, initial studies with 188 Re indicate high renal uptake which may interfere with potential therapeutic applications of this radiopharmaceutical. A modified radiolabelling method has been shown to reduced the renal uptake of 188 Re(V)DMSA in control animals. The aims of this study were to determine whether there is uptake of modified 188 Re(V)DMSA in nude mice injected with an MTC cell line and whether there is potential for MTC therapy. Two groups of mice were injected in the left flank (SC) with TT cell line, and in mice showing tumour growth a low-dose (400 kBq) of 188 Re(V)DMSA was injected via a tail vein 8 weeks later. Biodistribution was performed on several mice and several others were given 'therapy' injections (8 MBq) to determine whether tumour shrinkage could be objectively observed. Tracer uptake was highest in bone and kidneys but tumour uptake was relatively low. However, no new tumour growth was seen in any of the mice subsequent to therapy injections and 1 mouse showed complete remission within 5 weeks of injection. Further animal and human studies will need to be performed to determine the potential role of this modified 118 Re(V)DMSA in patients with MTC

Aluminum fin-stock alloys

International Nuclear Information System (INIS)

Gul, R.M.; Mutasher, F.

2007-01-01

Aluminum alloys have long been used in the production of heat exchanger fins. The comparative properties of the different alloys used for this purpose has not been an issue in the past, because of the significant thickness of the finstock material. However, in order to make fins lighter in weight, there is a growing demand for thinner finstock materials, which has emphasized the need for improved mechanical properties, thermal conductivity and corrosion resistance. The objective of this project is to determine the effect of iron, silicon and manganese percentage increment on the required mechanical properties for this application by analyzing four different aluminum alloys. The four selected aluminum alloys are 1100, 8011, 8079 and 8150, which are wrought non-heat treatable alloys with different amount of the above elements. Aluminum alloy 1100 serve as a control specimen, as it is commercially pure aluminum. The study also reports the effect of different annealing cycles on the mechanical properties of the selected alloys. Metallographic examination was also preformed to study the effect of annealing on the precipitate phases and the distribution of these phases for each alloy. The microstructure analysis of the aluminum alloys studied indicates that the precipitated phase in the case of aluminum alloys 1100 and 8079 is beta-FeAI3, while in 8011 it is a-alfa AIFeSi, and the aluminum alloy 8150 contains AI6(Mn,Fe) phase. The comparison of aluminum alloys 8011 and 8079 with aluminum alloy 1100 show that the addition of iron and silicon improves the percent elongation and reduces strength. The manganese addition increases the stability of mechanical properties along the annealing range as shown by the comparison of aluminum alloy 8150 with aluminum alloy 1100. Alloy 8150 show superior properties over the other alloys due to the reaction of iron and manganese, resulting in a preferable response to thermal treatment and improved mechanical properties. (author)

Improvement of poly-γ-glutamic acid biosynthesis in a moving bed biofilm reactor by Bacillus subtilis NX-2.

Science.gov (United States)

Jiang, Yongxiang; Tang, Bao; Xu, Zongqi; Liu, Kun; Xu, Zheng; Feng, Xiaohai; Xu, Hong

2016-10-01

The production of poly-γ-glutamic acid (γ-PGA) by Bacillus subtilis NX-2 using a moving bed biofilm reactor (MBBR) system was tested for the first time in this study. Polypropylene TL-2 was chosen as a suitable carrier, and γ-PGA concentration of 42.7±0.86g/L and productivity of 0.59±0.06g/(Lh) were obtained in batch fermentation. After application of the strategy of dissolved oxygen (DO)-stat feeding, higher γ-PGA concentration and productivity were achieved than with glucose feedback feeding. Finally, the repeated fed-batch cultures implemented in the MBBR system showed high stability, and the maximal γ-PGA concentration and productivity of 74.2g/L and 1.24g/(Lh) were achieved, respectively. In addition, the promotion of oxygen transfer by an MBBR carrier was well explained by a computational fluid dynamics (CFD) simulation. These results suggest that an MBBR system could be applied to large-scale γ-PGA production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nickel alloys and high-alloyed special stainless steels. Properties, manufacturing, applications. 4. compl. rev. ed.

International Nuclear Information System (INIS)

Heubner, Ulrich; Kloewer, Jutta; Alves, Helena; Behrens, Rainer; Schindler, Claudius; Wahl, Volker; Wolf, Martin

2012-01-01

This book contains the following eight topics: 1. Nickel alloys and high-alloy special stainless steels - Material overview and metallurgical principles (U. Heubner); 2. Corrosion resistance of nickel alloys and high-alloy special stainless steels (U. Heubner); 3. Welding of nickel alloys and high-alloy special stainless steels (T. Hoffmann, M. Wolf); 4. High-temperature materials for industrial plant construction (J. Kloewer); 5. Nickel alloys and high-alloy special stainless steels as hot roll clad composites-a cost-effective alternative (C. Schindler); 6. Selected examples of the use of nickel alloys and high-alloy special stainless steels in chemical plants (H. Alves); 7. The use of nickel alloys and stainless steels in environmental engineering (V. Wahl); 8: Nickel alloys and high-alloy special stainless steels for the oil and gas industry (R. Behrens).

Biocompatibility of dental alloys

Energy Technology Data Exchange (ETDEWEB)

Braemer, W. [Heraeus Kulzer GmbH and Co. KG, Hanau (Germany)

2001-10-01

Modern dental alloys have been used for 50 years to produce prosthetic dental restorations. Generally, the crowns and frames of a prosthesis are prepared in dental alloys, and then veneered by feldspar ceramics or composites. In use, the alloys are exposed to the corrosive influence of saliva and bacteria. Metallic dental materials can be classified as precious and non-precious alloys. Precious alloys consist of gold, platinum, and small amounts of non-precious components such as copper, tin, or zinc. The non-precious alloys are based on either nickel or cobalt, alloyed with chrome, molybdenum, manganese, etc. Titanium is used as Grade 2 quality for dental purposes. As well as the dental casting alloys, high purity electroplated gold (99.8 wt.-%) is used in dental technology. This review discusses the corrosion behavior of metallic dental materials with saliva in ''in vitro'' tests and the influence of alloy components on bacteria (Lactobacillus casei and Streptococcus mutans). The test results show that alloys with high gold content, cobalt-based alloys, titanium, and electroplated gold are suitable for use as dental materials. (orig.)

Interphase thermodynamic bond in heterogeneous alloys: effects on alloy properties

International Nuclear Information System (INIS)

Savchenko, A.M.; Konovalov, Yu.V.; Yuferov, O.I.

2005-01-01

Inconsistency between a conventional thermodynamic description of alloys as a mechanical mixture of phases and a real alloys state as a common thermodynamic system in which there is a complicated physical-chemical phases interaction has been considered. It is supposed that in heterogeneous alloys (eutectic ones, for instance), so called interphase thermodynamic bond can become apparent due to a partial electron levels splitting under phase interaction. Thermodynamic description of phase equilibrium in alloys is proposed taking into account a thermodynamic bond for the system with phase diagram of eutectic type, and methods of the value of this bond estimation are presented. Experimental evidence (Al-Cu-Si, Al-Si-Mg-Cu, U-Mo + Al) of the effect of interphase thermodynamic bond on temperature and enthalpy of melting of alloys are produced as well as possibility of its effects on alloys electrical conduction, strength, heat and corrosion resistance is substantiated theoretically [ru

Re-188 labelling of DD-3B6/22 Fab' monoclonal antibody fragment for radio immuno therapy

International Nuclear Information System (INIS)

Schmidt, P.F.; Smith, S.V.; Bundesen, P.

1996-01-01

The chemical similarity of technetium and rhenium has created much interest in the nuclear medicine field to make a 'matched pair' of radiopharmaceuticals for radioimmuno- diagnosis and therapy. Clinical trials with the 99 mTc-DD-3B6/22 Fab' has shown promise in the diagnosis of ovarian cancer. The design of the analogous therapeutic agent with rhenium-188 (155 keV γ 15 % abundant, β E max 2.1 MeV, T 1/2 17 h) is under investigation. The present study describes the approach taken for direct radiolabelling of the DD-3B6/22 Fab' with carrier-free 188 Re and its biological evaluation in balb/c and nude mice. The effect of temperature, pH and antibody concentration on the amount and rate of transchelation was also evaluated. The final product had a specific activity of 35 mCi/mg with an immunoreactive fraction of 77%. Stability of the product was assessed under various conditions: temperature, presence and absence of an inert atmosphere and presence of ascorbic acid (stabilised). Pharmacokinetics of the final product was evaluated in balb/c and nude mice transplanted with both D-dimer (+Ve) and Glycine (-Ve) beads. Results show that 188 Re DD-3B6/22 Fab' clears rapidly from the blood (α = 2.4 hr, β = 3.5 hr) and is excreted through the renal system. Localisation to subcutaneous antigen beads shows specific uptake to the D-dimer (antigen) beads was achieved within 6 h (0.23% ID) and was maintained for 24 hour post injection. Specificity to antigen implants was 5:1 (P 99m Tc DD-3B6/22 Fab' in mice. The radiolabelling procedures are congenial for therapeutic levels and hence the authors believe that the 188 Re DD-3B6/22 Fab' has some potential for use in treatment of ovarian cancer

Exciton confinement in strain-engineered metamorphic InAs/I nxG a1 -xAs quantum dots

Science.gov (United States)

Khattak, S. A.; Hayne, M.; Huang, J.; Vanacken, J.; Moshchalkov, V. V.; Seravalli, L.; Trevisi, G.; Frigeri, P.

2017-11-01

We report a comprehensive study of exciton confinement in self-assembled InAs quantum dots (QDs) in strain-engineered metamorphic I nxG a1 -xAs confining layers on GaAs using low-temperature magnetophotoluminescence. As the lattice mismatch (strain) between QDs and confining layers (CLs) increases from 4.8% to 5.7% the reduced mass of the exciton increases, but saturates at higher mismatches. At low QD-CL mismatch there is clear evidence of spillover of the exciton wave function due to small localization energies. This is suppressed as the In content x in the CLs decreases (mismatch and localization energy increasing). The combined effects of low effective mass and wave-function spillover at high x result in a diamagnetic shift coefficient that is an order of magnitude larger than for samples where In content in the barrier is low (mismatch is high and localization energy is large). Finally, an anomalously small measured Bohr radius in samples with the highest x is attributed to a combination of thermalization due to low localization energy, and its enhancement with magnetic field, a mechanism which results in small dots in the ensemble dominating the measured Bohr radius.

Study of SiNx:Hy passivant layers for AlGaN/GaN high electron mobility transistors

International Nuclear Information System (INIS)

Redondo-Cubero, A.; Gago, R.; Romero, M.F.; Gonzalez-Posada, F.; Brana, A.F.; Munoz, E.; Jimenez, A.

2008-01-01

In this work, hydrogenated silicon nitride (SiN x :H y ) grown by chemical vapour deposition as passivant layers for high electron mobility transistors (HEMT) have been studied. The film composition and bonding structure were determined by ion beam analysis and X-ray absorption spectroscopy techniques, respectively. The effects of gas precursors (SiH 4 /N 2 and SiH 4 /NH 3 ) and film/substrate interface on the film growth have been addressed. The growth on different substrates (Si, GaN, AlGaN), and the effects of plasma pre-treatments have been studied before the growth and the film growth evolution. Results yield no significant differences in all the analysed samples. This points out the relevant role of SiHn radicals as growth precursor species and that intrinsic characteristics of the SiNx:Hy layers are not affected by the film/substrate interface. Hence, improved performance of HEMT with surface plasma pre-treatments before passivation should be related to extrinsic mechanisms (such as creation of defects in AlGaN surface, removal of the surface contamination or ion-induced roughness). (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Irradiation-assisted stress corrosion cracking in HTH Alloy X-750 and Alloy 625

International Nuclear Information System (INIS)

Bajaj, R.; Mills, W.J.; Lebo, M.R.; Hyatt, B.Z.; Burke, M.G.

1995-01-01

In-reactor testing of bolt-loaded compact tension specimens was performed in 360 C water to determine the irradiation-assisted stress corrosion cracking (IASCC) behavior of HTH Alloy X-750 and direct-aged Alloy 625. New data confirm previous results showing that high irradiation levels reduce SCC resistance in Alloy X-750. Heat-to-heat variability correlates with boron content, with low boron heats showing improved IASCC properties. Alloy 625 is resistant to IASCC, as no cracking was observed in any Alloy 625 specimens. Microstructural, microchemical and deformation studies were performed to characterize the mechanisms responsible for IASCC in Alloy X-750 and the lack of an effect in Alloy 625. The mechanisms under investigation are: boron transmutation effects, radiation-induced changes in microstructure and deformation characteristics, and radiation-induced segregation. Irradiation of Alloy X-750 caused significant strengthening and ductility loss that was associated with the formation of cavities and dislocation loops. High irradiation levels did not cause significant segregation of alloying or trace elements in Alloy X-750. Irradiation of Alloy 625 resulted in the formation of small dislocation loops and a fine body-centered-orthorhombic phase. The strengthening due to the loops and precipitates was apparently offset by a partial dissolution of γ double-prime precipitates, as Alloy 625 showed no irradiation-induced strengthening or ductility loss. In the nonirradiated condition, an IASCC susceptible HTH heat containing 28 ppm B showed grain boundary segregation of boron, whereas a nonsusceptible HTH heat containing 2 ppm B and Alloy 625 with 20 ppm B did not show significant boron segregation. Transmutation of boron to helium at grain boundaries, coupled with matrix strengthening, is believed to be responsible for IASCC in Alloy X-750, and the absence of these two effects results in the superior IASCC resistance displayed by Alloy 625

Cats in Positive Energy Balance Have Lower Rates of Adipose Gain When Fed Diets Containing 188 versus 121 ppm L-Carnitine

Directory of Open Access Journals (Sweden)

M. A. Gooding

2016-01-01

Full Text Available L-carnitine (LC is included in select adult feline diets for weight management. This study investigated whether feeding adult cats with diets containing either 188 ppm of LC (LC188 or 121 ppm of LC (LC121 and feeding them 120% of maintenance energy requirement (MER resulted in differences in total energy expenditure (EE, metabolic fuel selection, BW, body composition, and behavior. Cats (n=20, 4±1.2 yrs were stratified for BCS and randomly assigned to one of two dietary treatments and fed for 16 weeks. BW was measured weekly, and indirect calorimetry, body composition, physical activity, play motivation, and cognition were measured at baseline and throughout the study. A mixed, repeated measures, ANCOVA model was used. Cats in both treatments gained BW (P0.05. There were no differences in body composition between groups at baseline; however, body fat (g and body fat : lean mass ratio were greater in cats fed LC121 in contrast to cats fed LC188 (P0.05. Supplying dietary LC at a dose of at least 188 ppm may be beneficial for the health and well-being of cats fed above MER.

16 CFR 18.8 - Deception as to origin or source of industry products.

Science.gov (United States)

2010-01-01

... misrepresentation as to source or origin (e.g., “Colorado Blue Spruce,” “Arizona Cypress,” “Black Hills Spruce... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Deception as to origin or source of industry... GUIDES FOR THE NURSERY INDUSTRY § 18.8 Deception as to origin or source of industry products. (a) It is...

Filler metal alloy for welding cast nickel aluminide alloys

Science.gov (United States)

Santella, M.L.; Sikka, V.K.

1998-03-10

A filler metal alloy used as a filler for welding cast nickel aluminide alloys contains from about 15 to about 17 wt. % chromium, from about 4 to about 5 wt. % aluminum, equal to or less than about 1.5 wt. % molybdenum, from about 1 to about 4.5 wt. % zirconium, equal to or less than about 0.01 wt. % yttrium, equal to or less than about 0.01 wt. % boron and the balance nickel. The filler metal alloy is made by melting and casting techniques such as are melting the components of the filler metal alloy and cast in copper chill molds. 3 figs.

The Evaluation of the Corrosion Resistance of the Al-Si Alloys Antimony Alloyed

Directory of Open Access Journals (Sweden)

Svobodova J.

2014-06-01

Full Text Available This paper deals with the evaluation of the corrosion resistance of the Al-Si alloys alloyed with the different amount of antimony. Specifically it goes about the alloy AlSi7Mg0,3 which is antimony alloyed in the concentrations 0; 0,001; 0,005; 0,01 a 0,05 wt. % of antimony. The introduction of the paper is dedicated to the theory of the aluminium alloys corrosion resistance, testing and evaluation of the corrosion resistance. The influence of the antimony to the Al-Si alloys properties is described further in the introduction. The experimental part describes the experimental samples which were prepared for the experiment and further they were exposed to the loading in the atmospheric conditions for a period of the 3 months. The experimental samples were evaluated macroscopically and microscopically. The results of the experiment were documented and the conclusions in terms of the antimony impact to the corrosion resistance of the Al-Si alloy were concluded. There was compared the corrosion resistance of the Al-Si alloy antimony alloyed (with the different antimony content with the results of the Al-Si alloy without the alloying after the corrosion load in the atmospheric conditions in the experiment.

VANADIUM ALLOYS

Science.gov (United States)

Smith, K.F.; Van Thyne, R.J.

1959-05-12

This patent deals with vanadium based ternary alloys useful as fuel element jackets. According to the invention the ternary vanadium alloys, prepared in an arc furnace, contain from 2.5 to 15% by weight titanium and from 0.5 to 10% by weight niobium. Characteristics of these alloys are good thermal conductivity, low neutron capture cross section, good corrosion resistance, good welding and fabricating properties, low expansion coefficient, and high strength.

Crevice corrosion propagation on alloy 625 and alloy C276 in natural seawater

International Nuclear Information System (INIS)

McCafferty, E.; Bogar, F.D.; Thomas, E.D. II; Creegan, C.A.; Lucas, K.E.; Kaznoff, A.I.

1997-01-01

Chemical composition of the aqueous solution within crevices on two different Ni-Cr-Mo-Fe alloys immersed in natural seawater was determined using a semiquantitative thin-layer chromatographic method. Active crevices were found to contain concentrated amounts of dissolved Ni 2+ , Cr 3+ , Mo 3+ , and Fe 2+ ions. Propagation of crevice corrosion for the two alloys was determined from anodic polarization curves in model crevice solutions based upon stoichiometric dissolution or selective dissolution of alloy components. Both alloys 625 (UNS N06625) and C276 (UNS N10276) underwent crevice corrosion in the model crevice electrolytes. For the model crevice solution based upon selective dissolution of alloy constituents, the anodic dissolution rate for alloy 625 was higher than that for alloy C276. This trend was reversed for the model crevice solution based upon uniform dissolution of alloy constituents

Corrosion of aluminum alloys as a function of alloy composition

International Nuclear Information System (INIS)

Johnson, A.B. Jr.

1969-10-01

A study was initiated which included nineteen aluminum alloys. Tests were conducted in high purity water at 360 0 C and flow tests (approx. 20 ft/sec) in reactor process water at 130 0 C (TF-18 loop tests). High-silicon alloys and AlSi failed completely in the 360 0 C tests. However, coupling of AlSi to 8001 aluminum suppressed the failure. The alloy compositions containing iron and nickel survived tht 360 0 C autoclave exposures. Corrosion rates varied widely as a function of alloy composition, but in directions which were predictable from previous high-temperature autoclave experience. In the TF-18 loop flow tests, corrosion penetrations were similar on all of the alloys and on high-purity aluminum after 105 days. However, certain alloys established relatively low linear corrosion rates: Al-0.9 Ni-0.5 Fe-0.1 Zr, Al-1.0 Ni-0.15 Fe-11.5 Si-0.8 Mg, Al-1.2 Ni-1.8 Fe, and Al-7.0 Ni-4.8 Fe. Electrical polarity measurements between AlSi and 8001 alloys in reactor process water at temperatures up to 150 0 C indicated that AlSi was anodic to 8001 in the static autoclave system above approx. 50 0 C

Surface treatment of new type aluminum lithium alloy and fatigue crack behaviors of this alloy plate bonded with Ti–6Al–4V alloy strap

International Nuclear Information System (INIS)

Sun, Zhen-Qi; Huang, Ming-Hui; Hu, Guo-Huai

2012-01-01

Highlights: ► A new generation aluminum lithium alloy which special made for Chinese commercial plane was investigated. ► Pattern of aluminum lithium alloy and Ti alloy were shown after anodization. ► Crack propagation of samples bonded with different wide Ti straps were studied in this paper. -- Abstract: Samples consisting of new aluminum lithium alloy (Al–Li alloy) plate developed by the Aluminum Company of America and Ti–6Al–4V alloy (Ti alloy) plate were investigated. Plate of 400 mm × 140 mm × 2 mm with single edge notch was anodized in phosphoric solution and Ti alloy plate of 200 mm × 20 (40) mm × 2 mm was anodized in alkali solution. Patterns of two alloys were studied at original/anodized condition. And then, aluminum alloy and Ti alloy plates were assembled into a sample with FM 94 film adhesive. Fatigue crack behaviors of the sample were investigated under condition of nominal stress σ = 36 MPa and 54 MPa, stress ratio of 0.1. Testing results show that anodization treatment modifies alloys surface topography. Ti alloy bonding to Al–Li alloy plate effectively retards crack growth than that of Al–Li alloy plate. Fatigue life of sample bonded with Ti alloy strap improves about 62.5% than that of non-strap plate.

The Properties of 7xxx Series Alloys Formed by Alloying Additions

Directory of Open Access Journals (Sweden)

Kwak Z.

2015-06-01

Full Text Available Currently there is a constant development in the field of aluminium alloys engineering. This results from, i.a., better understanding of the mechanisms that direct strengthening of these alloys and the role of microalloying. Now it is microalloying in aluminum alloys that is receiving a lot of attention. It affects substantially the macro- and microstructure and kinetics of phase transformation influencing the properties during production and its exploitation. 7xxx series aluminum alloys, based on the Al-Zn-Mg-Cu system, are high-strength alloys, moreover, the presence of Zr and Sr further increases their strength and improves resistance to cracking.

Country report: Brazil. Development of Radiopharmaceuticals Based on {sup 188}Re and {sup 90}Y for Radionuclide Therapy at IPEN-CNEN/SP

Energy Technology Data Exchange (ETDEWEB)

Osso, Jr., J. A.; Barrio, G.; Dias, C. R.B.R.; Brambilla, T. P.; Dantas, D. M.; Suzuki, K. N.; Barboza, M. F.S.; Bortoleti, E.; Fukumori, N. T.; Mengatti, J. [Radiopharmacy Center – Institute of Energetic and Nuclear Research – IPE N-CNEN/SP, São Paulo – Brazil (Brazil)

2010-07-01

The overall objective of this CRP is to develop radiopharmaceuticals for targeted therapy using {sup 188}Re and {sup 90}Y and to study the performance of generators with long lived parent radionuclides as well as to validate the QC control procedures for estimating the purity of generator eluents. The CRP is expected to enhance the capability in production of {sup 90}Y and {sup 188}Re radiopharmaceuticals to meet the increasing demand of therapeutic products for clinical applications, in particular in Brazil. In this period efforts were made towards the assembling of {sup 90}Sr-{sup 90}Y generators, quality control of {sup 90}Y, the labelling of DMSA(V) and anti-CD20 with {sup 188}Re and the labelling of Hydroxiapatite(HA) with {sup 90}Y. (author)

Reducing thermal conductivity of binary alloys below the alloy limit via chemical ordering

International Nuclear Information System (INIS)

Duda, John C; English, Timothy S; Jordan, Donald A; Norris, Pamela M; Soffa, William A

2011-01-01

Substitutional solid solutions that exist in both ordered and disordered states will exhibit markedly different physical properties depending on their exact crystallographic configuration. Many random substitutional solid solutions (alloys) will display a tendency to order given the appropriate kinetic and thermodynamic conditions. Such order-disorder transitions will result in major crystallographic reconfigurations, where the atomic basis, symmetry, and periodicity of the alloy change dramatically. Consequently, the dominant scattering mechanism in ordered alloys will be different than that in disordered alloys. In this study, we present a hypothesis that ordered alloys can exhibit lower thermal conductivities than their disordered counterparts at elevated temperatures. To validate this hypothesis, we investigate the phononic transport properties of disordered and ordered AB Lennard-Jones alloys via non-equilibrium molecular dynamics and harmonic lattice dynamics calculations. It is shown that the thermal conductivity of an ordered alloy is the same as the thermal conductivity of the disordered alloy at ∼0.6T melt and lower than that of the disordered alloy above 0.8T melt .

Translating VDM to Alloy

DEFF Research Database (Denmark)

Lausdahl, Kenneth

2013-01-01

specifications. However, to take advantage of the automated analysis of Alloy, the model-oriented VDM specifications must be translated into a constraint-based Alloy specifications. We describe how a sub- set of VDM can be translated into Alloy and how assertions can be expressed in VDM and checked by the Alloy...

Test Operations Procedure (TOP) 08-2-188 Chemical Point Detector Vapor Testing

Science.gov (United States)

2018-04-27

Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Test Operations Procedure (TOP) 08-2-188 Chemical Point Detector Vapor Testing 5a. CONTRACT...NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING...ORGANIZATION NAME(S) AND ADDRESS(ES) US Army Dugway Proving Ground West Desert Test Center (TEDT-DPW) Dugway, UT 84022-5000 8. PERFORMING ORGANIZATION

Electron beam and laser surface alloying of Al-Si base alloys

International Nuclear Information System (INIS)

Vanhille, P.; Tosto, S.; Pelletier, J.M.; Issa, A.; Vannes, A.B.; Criqui, B.

1992-01-01

Surface alloying on aluminium-base alloys is achieved either by using an electron beam or a laser beam, in order to improve the mechanical properties of the near-surface region. A predeposit of nickel is first realized by plasma spraying. Melting of both the coating and part of the substrate produces a surface alloy with a fine, dendritic microstructure with a high hardness. Enhancement of this property requires an increase in the nickel content. Various problems occur during the formation of nickel-rich surface layers: incomplete homogenization owing to a progressive increase of the liquidus temperature, cracks owing to the brittleness of this hard suface alloy, formation of a plasma when experiments are carried out in a gaseous environment (laser surface alloying). Nevertheless, various kinds of surface layers may be achieved; for example very hard surface alloys (HV 0.2 =900), with a thickness of about 500-600 μm, or very thick surface alloys (e>2 mm), with a fairly good hardness (greater than 350 HV 0.2 ). Thus, it is possible to obtain a large variety of new materials by using high energy beams on aluminium substrates. (orig.)

Combinatorial thin film materials science: From alloy discovery and optimization to alloy design

Energy Technology Data Exchange (ETDEWEB)

Gebhardt, Thomas, E-mail: gebhardt@mch.rwth-aachen.de; Music, Denis; Takahashi, Tetsuya; Schneider, Jochen M.

2012-06-30

This paper provides an overview of modern alloy development, from discovery and optimization towards alloy design, based on combinatorial thin film materials science. The combinatorial approach, combining combinatorial materials synthesis of thin film composition-spreads with high-throughput property characterization has proven to be a powerful tool to delineate composition-structure-property relationships, and hence to efficiently identify composition windows with enhanced properties. Furthermore, and most importantly for alloy design, theoretical models and hypotheses can be critically appraised. Examples for alloy discovery, optimization, and alloy design of functional as well as structural materials are presented. Using Fe-Mn based alloys as an example, we show that the combination of modern electronic-structure calculations with the highly efficient combinatorial thin film composition-spread method constitutes an effective tool for knowledge-based alloy design.

Combinatorial thin film materials science: From alloy discovery and optimization to alloy design

International Nuclear Information System (INIS)

Gebhardt, Thomas; Music, Denis; Takahashi, Tetsuya; Schneider, Jochen M.

2012-01-01

This paper provides an overview of modern alloy development, from discovery and optimization towards alloy design, based on combinatorial thin film materials science. The combinatorial approach, combining combinatorial materials synthesis of thin film composition-spreads with high-throughput property characterization has proven to be a powerful tool to delineate composition–structure–property relationships, and hence to efficiently identify composition windows with enhanced properties. Furthermore, and most importantly for alloy design, theoretical models and hypotheses can be critically appraised. Examples for alloy discovery, optimization, and alloy design of functional as well as structural materials are presented. Using Fe-Mn based alloys as an example, we show that the combination of modern electronic-structure calculations with the highly efficient combinatorial thin film composition-spread method constitutes an effective tool for knowledge-based alloy design.

Shape memory alloys

International Nuclear Information System (INIS)

Kaszuwara, W.

2004-01-01

Shape memory alloys (SMA), when deformed, have the ability of returning, in certain circumstances, to their initial shape. Deformations related to this phenomenon are for polycrystals 1-8% and up to 15% for monocrystals. The deformation energy is in the range of 10 6 - 10 7 J/m 3 . The deformation is caused by martensitic transformation in the material. Shape memory alloys exhibit one directional or two directional shape memory effect as well as pseudoelastic effect. Shape change is activated by temperature change, which limits working frequency of SMA to 10 2 Hz. Other group of alloys exhibit magnetic shape memory effect. In these alloys martensitic transformation is triggered by magnetic field, thus their working frequency can be higher. Composites containing shape memory alloys can also be used as shape memory materials (applied in vibration damping devices). Another group of composite materials is called heterostructures, in which SMA alloys are incorporated in a form of thin layers The heterostructures can be used as microactuators in microelectromechanical systems (MEMS). Basic SMA comprise: Ni-Ti, Cu (Cu-Zn,Cu-Al, Cu-Sn) and Fe (Fe-Mn, Fe-Cr-Ni) alloys. Shape memory alloys find applications in such areas: automatics, safety and medical devices and many domestic appliances. Currently the most important appears to be research on magnetic shape memory materials and high temperature SMA. Vital from application point of view are composite materials especially those containing several intelligent materials. (author)

Grindability of dental magnetic alloys.

Science.gov (United States)

Hayashi, Eisei; Kikuchi, Masafumi; Okuno, Osamu; Kimura, Kohei

2005-06-01

In this study, the grindability of cast magnetic alloys (Fe-Pt-Nb magnetic alloy and magnetic stainless steel) was evaluated and compared with that of conventional dental casting alloys (Ag-Pd-Au alloy, Type 4 gold alloy, and cobalt-chromium alloy). Grindability was evaluated in terms of grinding rate (i.e., volume of metal removed per minute) and grinding ratio (i.e., volume ratio of metal removed compared to wheel material lost). Solution treated Fe-Pt-Nb magnetic alloy had a significantly higher grinding rate than the aged one at a grinding speed of 750-1500 m x min(-1). At 500 m x min(-1), there were no significant differences in grinding rate between solution treated and aged Fe-Pt-Nb magnetic alloys. At a lower speed of 500 m x min(-1) or 750 m x min(-1), it was found that the grinding rates of aged Fe-Pt-Nb magnetic alloy and stainless steel were higher than those of conventional casting alloys.

Preparation of cyclotron-produced {sup 186}Re and comparison with reactor-produced {sup 186}Re and generator-produced {sup 188}Re for the labeling of bombesin

Energy Technology Data Exchange (ETDEWEB)

Moustapha, Moustapha E. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Ehrhardt, Gary J. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Smith, Charles J. [Department of Radiology, University of Missouri-Columbia, Columbia, MO 65211 (United States); University of Missouri Research Reactor (MURR), University of Missouri-Columbia, Columbia, MO 65211 (United States); Research Services, Harry S. Truman Memorial Veterans' Hospital, Columbia, MO 65201 (United States); Szajek, Lawrence P. [Positron Emission Tomography Department, National Institutes of Health, Bethesda, MD 20892-1180 (United States); Eckelman, William C. [Positron Emission Tomography Department, National Institutes of Health, Bethesda, MD 20892-1180 (United States); Jurisson, Silvia S. [Department of Chemistry, University of Missouri-Columbia, Columbia, MO 65211 (United States)]. E-mail: jurissons@missouri.edu

2006-01-15

The radioisotopes {sup 186}Re and {sup 188}Re have been extensively investigated for various forms of radiotherapy due to their useful and high-abundance {beta} particle emissions, low-abundance and imageable {gamma}-rays, and chemical resemblance to technetium. In addition, {sup 188}Re is available in no-carrier-added (NCA) form from long lived W-188 generators, whereas {sup 186}Re can be produced in large quantities from reactors, although not in NCA form. However, NCA {sup 186}Re can be produced on a cyclotron by a (p,n) reaction on {sup 186}W. The purpose of this study was to compare labeling of the peptide bombesin with these three forms of rhenium radioisotopes. Cyclotron-produced NCA {sup 186}Re was separated radiochemically from enriched {sup 186}W (96.9%) targets using high-purity methyl ethyl ketone (MEK). The resulting {sup 186}Re-MEK was then loaded onto a small alumina column to separate the resulting NCA {sup 186}Re from any remaining {sup 186}W. The experimental levels of impurities associated with {sup 186}Re at the end of the separation process were found to be 5.7x10{sup -6} Ci of {sup 182}Re (0.57%, t {sub 1/2}=12.7 h) and 1.283x10{sup -5} Ci of {sup 182m}Re (1.28%, t {sub 1/2}=2.67 days). The radionuclidic purity of the separated {sup 186}Re was found to be 99.6%, whereas the chemical identity was determined by reversed phase high-performance liquid chromatography (RP-HPLC) to be perrhenate ({sup 186}ReO{sub 4} {sup -}). Generator-produced {sup 188}ReO{sub 4} {sup -} from a {sup 188}W/{sup 188}Re generator (Oak Ridge National Laboratory) and CA {sup 186}ReO{sub 4} {sup -} produced from a {sup 185}Re(n,{gamma}){sup 186}Re reaction at the University of Missouri Research Reactor (MURR) were used for comparison with the NCA {sup 186}Re in subsequent studies. N{sub 3}S-5-Ava-BBN(7-14)NH{sub 2} conjugates provide flexibility for designing {sup 186,188}Re-labeled conjugates that retain high in vitro and in vivo specificity targeting of GRP receptor

Alloying Solid Solution Strengthening of Fe-Ga Alloys: A First-Principle Study

National Research Council Canada - National Science Library

Chen, Kuiying; Cheng, Leon M

2006-01-01

... and Co in cubic solid solution of Fe-Ga alloys. Mayer bond order "BO" values were used to evaluate the atomic bond strengths in the alloys, and were then used to assess the alloying strengthening characteristics...

A software package for patient-specific dosimetry in the locoregional RIT of gliomas using 188Re labelled NIMOTUZUMAB

International Nuclear Information System (INIS)

Torres, L.A.; Coca, M.A.; Sanchez, Y.; Cornejo, N.; Catasus, C.; Denaro, M. de

2008-01-01

Full text: The locoregional treatment of high-grade gliomas using beta emitter compounds allows delivering high radiation doses in the tumor bed and the brain adjacent tissues of patients suffering these aggressive malignancies. The main goal of this work was to implement patient-specific dosimetry procedures using a voxel-based methodology in order to compute and analyze the three-dimensional doses distributions received by the patients undergoing loco-regional treatment of gliomas with the 188 Re labeled MAb NIMOTUZUMAB. A software package called TRIDOSE has been developed to perform the image managing, volume registration, dose calculations and qualitative and quantitative analysis of the results, including dose-volume histograms and isodose curves. The dosimetric factors at voxel level for 188 Re ('S' values) were estimated using two different methods, Monte Carlo simulations of energy transport and deposition and the integration of the dose kernel functions. A quality control module was also implemented in order to test the software using well-known 3D distribution of activities or counts. The TRIDOSE outputs were compared with other commercial software showing relative differences lower than 1.10% for different sphere sizes. The established dosimetric procedures constitute a useful tool to compute the absorbed doses received by patients undergoing radioimmunotherapy of brain tumors with 188 Re-NIMOTUZUMAB. (author)

Investigation of the spin-lattice coupling in M n3G a1 -xS nxN antiperovskites

Science.gov (United States)

Shi, Kewen; Sun, Ying; Colin, Claire V.; Wang, Lei; Yan, Jun; Deng, Sihao; Lu, Huiqing; Zhao, Wenjun; Kazunari, Yamaura; Bordet, Pierre; Wang, Cong

2018-02-01

The magnetovolume effects (MVEs) of M n3G a1 -xS nxN antiperovskite compounds have been investigated by means of neutron powder diffraction. Increasing the Sn-doping content at the Ga site leads to the broadening of the magnetic phase transition temperature range and the thermal expansion behavior changes from negative to positive. We establish the relationship between the square of the ordered magnetic moment m2 and the volume variation Δ ωm for the antiferromagnetic phase (Γ5 g magnetic structure with rhombohedral symmetry R 3 ¯m ). The temperature variations of Δ ωm(T ) , m2(T ) and the magnetoelastic coupling constant C (T ) are also quantitatively analyzed according to the itinerant-electron theory. Moreover, the increase of the phonon contribution to the thermal expansion induced by Sn doping and the corresponding decrease of dm/dT are revealed to be the key parameters for tuning the MVEs. Our results allow elucidating and quantifying the mechanism of the spin-lattice coupling and can be used to design magnetic functional materials with controlled thermal expansion behaviors for specific applications.

Studies on neutron irradiation effects of iron alloys and nickel-base heat resistant alloys

International Nuclear Information System (INIS)

Watanabe, Katsutoshi

1987-09-01

The present paper describes the results of neutron irradiation effects on iron alloys and nickel-base heat resistant alloys. As for the iron alloys, irradiation hardening and embrittlement were investigated using internal friction measurement, electron microscopy and tensile testings. The role of alloying elements was also investigated to understand the irradiation behavior of iron alloys. The essential factors affecting irradiation hardening and embrittlement were thus clarified. On the other hand, postirradiation tensile and creep properties were measured of Hastelloy X alloy. Irradiation behavior at elevated temperatures is discussed. (author)

Dosimetry and microdosimetry of 188 Re-anti-CD20 and 131 I-anti-CD20 for the treatment of No Hodgkin lymphomas

International Nuclear Information System (INIS)

Torres G, E.

2007-01-01

The purpose of this investigation was to prepare 131 I-anti-CD20 and 188 Re-anti-CD20 and to estimate the radiation absorbed dose at macro- and micro- level during a NHL treatment. The work was divided in 4 general objectives: 1) preparation of 131 I-anti-CD20 and 188 Re-anti-CD20, 2) application in patients to obtain biokinetic parameters and estimate the organ absorbed doses 3) estimation of the cellular dosimetry using the MIRD methodology and the MCNP4C2 code and 4) estimation of the cellular microdosimetry using the NOREC code. 188 Re-anti-CD20 was prepared by a direct labelling method using sodium tartrate as a weak ligand. To evaluate the biological recognition a comparative study of the in vitro binding of 188 Re-anti-CD20, 125 I-anti-CD20 (positive control) and 188 Re-anti-CEA (negative control) to normal B Iymphocytes was performed. Biodistribution studies in normal mice were accomplished to assess the in vivo Re-anti-CD20 complex stability. The binding of ' Re-anti-CD20 to cells was in the same range as '251-anti-CD20 (>80%) considered as the positive control. 188 Re-anti-CD20 and '3'1-anti-CD20 prepared were administered in patients diagnosed with B cell NHL at the Centro Medico Siglo XXI (IMSS). The protocol was approved by the hospital's Medical Ethics Committee. AJI patients signed a consent form after receiving detailed information on the aims of the study. N data were the input for the OLINDA/EXM software to calculate the radiation absorbed dose to organs and whole body. Dosimetric studies indicate that after administration of 6.4 GBq and 4.87 to 8.75 GBq of '3'1-anti-CD20 and 188 Re-anti-CD20 respectively, the absorbed dose to total body would be 0.75 Gy which corresponds to the recommended dose for NHL therapies. The calculated organ absorbed doses indicate that 188 Re-anti-CD20 may be used in radioimmunotherapy without the risk of toxicity to red marrow or healthy organs. The absorbed dose (D) into cellular nucleus was calculated by two

Interim report on intrathoracic radiotherapy of human small-cell lung carcinoma in nude mice with Re-188-RC-160, a radiolabeled somatostatin analogue

International Nuclear Information System (INIS)

Zamora, P.O.; Bender, H.; Biersack, H.J.; Knapp, F.F. Jr.

1995-01-01

The purpose of this study was to evaluate the therapeutic efficacy of Re-188-RC-160 in experimental models of human small cell lung carcinomas which mimic the clinical presentation. In the experimental model, cells from the human small cell lung carcinoma cell line NCI-H69 cells were inoculated into the thoracic cavity of athymic mice and rats. Subsequently, the biodistribution of Re-188-RC-160 after injection into the pleural cavity, a radiolabeled somatostatin analogue, was monitored as was the effect on the subsequent growth of tumors. The results presented here, and which are a part of a larger series of studies, suggest that Re-188-RC-160 can be effectively used in this animal model to restrict the growth of small cell lung carcinoma in the thoracic cavity

Neutron-absorbing alloys

International Nuclear Information System (INIS)

Portnoi, K.I.; Arabei, L.B.; Gryaznov, G.M.; Levi, L.I.; Lunin, G.L.; Kozhukhov, V.M.; Markov, J.M.; Fedotov, M.E.

1975-01-01

A process is described for the production of an alloy consiting of 1 to 20% In, 0.5 to 15% Sm, and from 3 to 18% Hf, the balance being Ni. Such alloys show a good absorption capacity for thermal and intermediate neutrons, good neutron capture efficiency, and good corrosion resistance, and find application in nuclear reactor automatic control and safety systems. The Hf provides for the maintenance of a reasonably high order of neutron capture efficiency throughout the lifetime of a reactor. The alloys are formed in a vacuum furnace operating with an inert gas atmosphere at 280 to 300 mm.Hg. They have a corrosion resistance from 3 to 3.5 times that of the Ag-based alloys commonly employed, and a neutron capture efficiency about twice that of the Ag alloys. Castability and structural strength are good. (U.K.)

Effect of mechanical alloying on FeCrC reinforced Ni alloys

Energy Technology Data Exchange (ETDEWEB)

Yilmaz, S. Osman [Univ. of Namik Kemal, Tekirdag (Turkey); Teker, Tanju [Adiyaman Univ. (Turkey). Dept. of Metallurgical and Materials Engineering; Demir, Fatih [Batman Univ. (Turkey)

2016-05-01

Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing and rewelding of powder particles in a high-energy ball mill. In the present study, the intermetallic matrix composites (IMCs) of Ni-Al reinforced by M{sub 7}C{sub 3} were produced by powder metallurgical routes via solid state reaction of Ni, Al and M{sub 7}C{sub 3} particulates by mechanical alloying processes. Ni, Al and M{sub 7}C{sub 3} powders having 100 μm were mixed, mechanical alloyed and the compacts were combusted in a furnace. The mechanically alloyed (MAed) powders were investigated by X-ray diffraction (XRD), microhardness measurement, optic microscopy (OM), scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The presence of the carbides depressed the formation of unwanted NiAl intermetallic phases. The mechanical alloyed M{sub 7}C{sub 3} particles were unstable and decomposed partially within the matrix during alloying and sintering, and the morphology of the composites changed with the dissolution ratio of M{sub 7}C{sub 3} and sintering temperature.

Advances in titanium alloys

International Nuclear Information System (INIS)

Seagle, S.R.; Wood, J.R.

1993-01-01

As described above, new developments in the aerospace market are focusing on higher temperature alloys for jet engine components and higher strength/toughness alloys for airframe applications. Conventional alloys for engines have reached their maximum useful temperature of about 1000 F (540 C) because of oxidation resistance requirements. IMI 834 and Ti-1100 advanced alloys show some improvement, however, the major improvement appears to be in gamma titanium aluminides which could extend the maximum usage temperature to about 1500 F (815 C). This puts titanium alloys in a competitive position to replace nickel-base superalloys. Advanced airframe alloys such as Ti-6-22-22S, Beta C TM , Ti-15-333 and Ti-10-2-3 with higher strength than conventional Ti-6-4 are being utilized in significantly greater quantities, both in military and commercial applications. These alloys offer improved strength with little or no sacrifice in toughness and improved formability, in some cases. Advanced industrial alloys are being developed for improved corrosion resistance in more reducing and higher temperature environments such as those encountered in sour gas wells. Efforts are focused on small precious metal additions to optimize corrosion performance for specific applications at a modest increase in cost. As these applications develop, the usage of titanium alloys for industrial markets should steadily increase to approach that for aerospace applications. (orig.)

Progressive degradation of alloy 690 and the development of a significant improvement in alloy 800CR

International Nuclear Information System (INIS)

Staehle, Roger W.; Arioka, Koji; Tapping, Robert

2015-01-01

The present most widely used alloys for tubing in steam generators and structural materials in water cooled reactors are Alloy 690 and Alloy 800. However, both alloys, while improved over Alloy 600 may not meet the needs of longer range applications in the range of 80-100 years. Alloy 690 sustains damage resulting from the formation of cavities at grain boundaries which eventually cover about 50% of the area of the grain boundaries with the remainder covering being covered with carbides. The cavities seem to nucleate on the carbides leaving the grain boundaries a structure of cavities and carbides. Such a structure will lead the Alloy 690 to fail completely. Normal Alloy 800 does not produce such cavities and probably retains a large amount of its corrosion resistance but does sustain progressive SCC at low rate. A new alloy, 800CR, has been developed in a collaboration among Arioka, Tapping, and Staehle. This alloy is based on a Cr composition of 23.5-27% with the remainder retaining the previous Alloy 800 composition. 800CR sustains a crack velocity about 100 times less than Alloy 690 and a negligible rate of initiation. The 800CR, alloy is now seeking a patent. (authors)

Dosimetry and microdosimetry of {sup 188} Re-anti-CD20 and {sup 131} I-anti-CD20 for the treatment of No Hodgkin lymphomas; Dosimetria y microdosimetria del {sup 188} Re-anti-CD20 y {sup 131} I-anti-CD20 para el tratamiento de linfomas No Hodgkin

Energy Technology Data Exchange (ETDEWEB)

Torres G, E

2007-07-01

The purpose of this investigation was to prepare {sup 131}I-anti-CD20 and {sup 188}Re-anti-CD20 and to estimate the radiation absorbed dose at macro- and micro- level during a NHL treatment. The work was divided in 4 general objectives: 1) preparation of {sup 131}I-anti-CD20 and {sup 188}Re-anti-CD20, 2) application in patients to obtain biokinetic parameters and estimate the organ absorbed doses 3) estimation of the cellular dosimetry using the MIRD methodology and the MCNP4C2 code and 4) estimation of the cellular microdosimetry using the NOREC code. {sup 188}Re-anti-CD20 was prepared by a direct labelling method using sodium tartrate as a weak ligand. To evaluate the biological recognition a comparative study of the in vitro binding of {sup 188}Re-anti-CD20, {sup 125}I-anti-CD20 (positive control) and {sup 188}Re-anti-CEA (negative control) to normal B Iymphocytes was performed. Biodistribution studies in normal mice were accomplished to assess the in vivo Re-anti-CD20 complex stability. The binding of ' Re-anti-CD20 to cells was in the same range as '251-anti-CD20 (>80%) considered as the positive control. {sup 188}Re-anti-CD20 and '3'1-anti-CD20 prepared were administered in patients diagnosed with B cell NHL at the Centro Medico Siglo XXI (IMSS). The protocol was approved by the hospital's Medical Ethics Committee. AJI patients signed a consent form after receiving detailed information on the aims of the study. N data were the input for the OLINDA/EXM software to calculate the radiation absorbed dose to organs and whole body. Dosimetric studies indicate that after administration of 6.4 GBq and 4.87 to 8.75 GBq of '3'1-anti-CD20 and {sup 188}Re-anti-CD20 respectively, the absorbed dose to total body would be 0.75 Gy which corresponds to the recommended dose for NHL therapies. The calculated organ absorbed doses indicate that {sup 188}Re-anti-CD20 may be used in radioimmunotherapy without the risk of toxicity to red marrow or

Dosimetry and microdosimetry of {sup 188} Re-anti-CD20 and {sup 131} I-anti-CD20 for the treatment of No Hodgkin lymphomas; Dosimetria y microdosimetria del {sup 188} Re-anti-CD20 y {sup 131} I-anti-CD20 para el tratamiento de linfomas No Hodgkin

Energy Technology Data Exchange (ETDEWEB)

Torres G, E

2007-07-01

The purpose of this investigation was to prepare {sup 131}I-anti-CD20 and {sup 188}Re-anti-CD20 and to estimate the radiation absorbed dose at macro- and micro- level during a NHL treatment. The work was divided in 4 general objectives: 1) preparation of {sup 131}I-anti-CD20 and {sup 188}Re-anti-CD20, 2) application in patients to obtain biokinetic parameters and estimate the organ absorbed doses 3) estimation of the cellular dosimetry using the MIRD methodology and the MCNP4C2 code and 4) estimation of the cellular microdosimetry using the NOREC code. {sup 188}Re-anti-CD20 was prepared by a direct labelling method using sodium tartrate as a weak ligand. To evaluate the biological recognition a comparative study of the in vitro binding of {sup 188}Re-anti-CD20, {sup 125}I-anti-CD20 (positive control) and {sup 188}Re-anti-CEA (negative control) to normal B Iymphocytes was performed. Biodistribution studies in normal mice were accomplished to assess the in vivo Re-anti-CD20 complex stability. The binding of ' Re-anti-CD20 to cells was in the same range as '251-anti-CD20 (>80%) considered as the positive control. {sup 188}Re-anti-CD20 and '3'1-anti-CD20 prepared were administered in patients diagnosed with B cell NHL at the Centro Medico Siglo XXI (IMSS). The protocol was approved by the hospital's Medical Ethics Committee. AJI patients signed a consent form after receiving detailed information on the aims of the study. N data were the input for the OLINDA/EXM software to calculate the radiation absorbed dose to organs and whole body. Dosimetric studies indicate that after administration of 6.4 GBq and 4.87 to 8.75 GBq of '3'1-anti-CD20 and {sup 188}Re-anti-CD20 respectively, the absorbed dose to total body would be 0.75 Gy which corresponds to the recommended dose for NHL therapies. The calculated organ absorbed doses indicate that {sup 188}Re-anti-CD20 may be used in radioimmunotherapy without the risk of toxicity to red marrow or healthy organs. The absorbed dose

Nonswelling alloy

Science.gov (United States)

Harkness, S.D.

1975-12-23

An aluminum alloy containing one weight percent copper has been found to be resistant to void formation and thus is useful in all nuclear applications which currently use aluminum or other aluminum alloys in reactor positions which are subjected to high neutron doses.

Nonswelling alloy

International Nuclear Information System (INIS)

Harkness, S.D.

1975-01-01

An aluminum alloy containing one weight percent copper has been found to be resistant to void formation and thus is useful in all nuclear applications which currently use aluminum or other aluminum alloys in reactor positions which are subjected to high neutron doses

Labelled biomolecules with Sm-153, Re-188 and Y-90 for targeted radiotherapy

International Nuclear Information System (INIS)

Ahmad, M.; Pervez, S.

2000-01-01

Direct labeling of Lanreotide with Rhenium-188 was studied. Reduction of cysteine bridge was performed by reducing agents (ascorbic acid, 2ME). The perrhenate eluted from the generator was reduced with stannous chloride. Tartarate was used as transchelating agent. After pH adjustment, shaking and incubation for various time intervals were carried out. Thin Layer chromatography and reverse phase chromatography were used to monitor the radiolabelling yield. Stability of radiolabelled Lanreotide was also checked

PLUTONIUM-ZIRCONIUM ALLOYS

Science.gov (United States)

Schonfeld, F.W.; Waber, J.T.

1960-08-30

A series of nuclear reactor fuel alloys consisting of from about 5 to about 50 at.% zirconium (or higher zirconium alloys such as Zircaloy), balance plutonium, and having the structural composition of a plutonium are described. Zirconium is a satisfactory diluent because it alloys readily with plutonium and has desirable nuclear properties. Additional advantages are corrosion resistance, excellent fabrication propenties, an isotropie structure, and initial softness.

187Os/188Os of boninites from the Izu-Bonin-Mariana forearc, IODP Exp 352

Science.gov (United States)

Niles, D. E.; Nelson, W. R.; Reagan, M. K.; Pearce, J. A.; Godard, M.; Shervais, J. W.

2016-12-01

The Izu-Bonin-Mariana (IBM) subduction zone is an ideal laboratory in which to study the evolution of a subduction zone from its initiation to the development of modern-day arc volcanism. Boninite lavas were produced in the IBM forearc region during the early stages of subduction and are thought to have been generated by flux melting the previously depleted mantle wedge. Mariana forearc mantle peridotites record unradiogenic 187Os/188Os signatures (0.1193-0.1273) supporting the existence of variably depleted mantle in this region (Parkinson et al., 1998). In order to understand the connection between the regional mantle, slab-derived fluids, and the generation of boninites, Re-Os isotopic data were measured on subset of boninite-series lavas obtained during IODP Expedition 352. Preliminary age-corrected (48 Ma) 187Os/188Os isotopic data for boninite-series lavas (sites U1439C and U1442A) are unradiogenic to modestly radiogenic (0.1254-0.1390) compared to primitive mantle (0.1296), consistent with Os isotopic data from boninite sands from the Bonin Islands (0.1279-0.1382; Suzuki et al., 2011). The least radiogenic boninites have 187Os/188Os (< 0.1296) values consistent with average MORB mantle recorded globally by abyssal peridotites (0.1238 ± 0.0042; Rudnick & Walker, 2009). However, boninite lavas were not derived from the most refractory ancient mantle recorded by Mariana peridotites. Unradiogenic boninites generally have higher Os abundances (0.043-0.567 ppb), whereas more radiogenic boninites have low Os abundances (0.015-0.036). Due to their low Os abundances, the moderately radiogenic isotopic signatures may be the result of interaction with highly radiogenic seawater or incorporation of radiogenic sediment (e.g. Suzuki et al. 2011). However, the radiogenic values could also be the result of fluid flux from the subducting Pacific plate.

3D dosimetry study of 188Re liquid balloon for intravascular brachytherapy using BANG polymer gel dosemeters

International Nuclear Information System (INIS)

Wuu, S.; Schiff, P.B.; Maryanski, M.; Liu, T.; Borzillary, S.; Weinberger, J.

2002-01-01

It has been suggested that the combination of intravascular brachytherapy and coronary stent implantation may result in further reduction of restenosis after percutaneous balloon angioplasty. The use of an angioplasty balloon filled with a P 188 Re liquid beta source for intravascular brachytherapy provides the advantage of accurate source positioning and uniform dose distribution to the coronary vessel wall. The effect of source edge and stent on the dose distribution of the target tissue may be clinically important. In BANG gels, the absorbed radiation produces free-radical chain polymerisation of acrylic monomers that are initially dissolved in the gel. The number of polymer particles is proportional to the absorbed dose. In this study, 3D dose distributions are presented for 188 Re balloons, with and without stents, using a prototype He-Ne laser CT scanner and the proprietary BANG polymer gel dosemeters. (author)

Ultrahigh temperature intermetallic alloys

Energy Technology Data Exchange (ETDEWEB)

Brady, M.P.; Zhu, J.H.; Liu, C.T.; Tortorelli, P.F.; Wright, J.L.; Carmichael, C.A.; Walker, L.R. [Oak Ridge National Lab., TN (United States). Metals and Ceramics Div.

1997-12-01

A new family of Cr-Cr{sub 2}X based alloys with fabricability, mechanical properties, and oxidation resistance superior to previously developed Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys has been identified. The new alloys can be arc-melted/cast without cracking, and exhibit excellent room temperature and high-temperature tensile strengths. Preliminary evaluation of oxidation behavior at 1100 C in air indicates that the new Cr-Cr{sub 2}X based alloys form an adherent chromia-based scale. Under similar conditions, Cr-Cr{sub 2}Nb and Cr-Cr{sub 2}Zr based alloys suffer from extensive scale spallation.

Electronic structure of alloys

International Nuclear Information System (INIS)

Ehrenreich, H.; Schwartz, L.M.

1976-01-01

The description of electronic properties of binary substitutional alloys within the single particle approximation is reviewed. Emphasis is placed on a didactic exposition of the equilibrium properties of the transport and magnetic properties of such alloys. Topics covered include: multiple scattering theory; the single band alloy; formal extensions of the theory; the alloy potential; realistic model state densities; the s-d model; and the muffin tin model. 43 figures, 3 tables, 151 references

Monitoring alloy formation during mechanical alloying process by x-ray diffraction techniques

International Nuclear Information System (INIS)

Abdul Kadir Masrom; Noraizam Md Diah; Mazli Mustapha

2002-01-01

Monitoring alloying (MA) is a novel processing technique that use high energy impact ball mill to produce alloys with enhanced properties and microscopically homogeneous materials starting from various powder mixtures. Mechanical alloying process was originally developed to produce oxide dispersion strengthened nickel superalloys. In principal, in high-energy ball milling process, alloy is formed by the result of repeated welding, fracturing and rewelding of powder particles in a high energy ball mill. In this process a powder mixture in a ball mill is subjected to high-energy collisions among balls. MA has been shown to be capable of synthesizing a variety of materials. It is known to be capable to prepare equilibrium and non-equilibrium phases starting from blended elemental or prealloyed powders. The process ability to produce highly metastable materials such as amorphous alloys and nanostructured materials has made this process attractive and it has been considered as a promising material processing technique that could be used to produce many advanced materials at low cost. The present study explores the conditions under which aluminum alloys formation occurs by ball milling of blended aluminum and its alloying elements powders. In this work, attempt was made in producing aluminum 2024 alloys by milling of blended elemental aluminum powder of 2024 composition in a stainless steel container under argon atmosphere for up to 210 minutes. X-ray diffraction together with thermal analysis techniques has been used to monitor phase changes in the milled powder. Results indicate that, using our predetermined milling parameters, alloys were formed after 120 minutes milling. The thermal analysis data was also presented in this report. (Author)

Beta Radiation exposure of medical personnel during vascular brachytherapy with Re-188

International Nuclear Information System (INIS)

Moka, D.; Baer, F.; Barth, I.; Rimpler, A.

2002-01-01

Intracoronary radiation is currently considered a promising breakthrough approach for preventing restenosis after angioplasty and stenting in patients with severe coronary artery disease. For the therapy of in-stent-restenosis vascular irradiation using balloon catheters filled with liquid radioisotopes provide excellent homogeneity due to the artery stenosis morphology. The radionuclide normally used is a Re-188 solutions (E β ,max=2,12 MeV). To achieve a sufficient dose in the stenosed artery wall (30 Gy in 0.5 mm wall depth) in a tolerable time-scale very high specific activities (>5-10 GBq/ml) of the isotope are necessary. During the preparation of the radioactive solution and the application at the patient very short distances between the source of the radiation and the skin of the doctors for cardiology / nuclear medicine are possible, especially when manipulations at the balloon catheter during the radiation are necessary. In addition, a severe risk of contamination exists. A further problem is that in hospitals often no or insufficient dosimeters for beta radiation are available. Occupational radiation exposure of the personnel was determined at the preparation of the Re-188 solution, the therapy itself and the waste management. The partial body exposure, i. e. the dose of the skin at the hands due to beta radiation, was determined with very sensitive thin-layer thermoluminescence dosimeters (TLD). During a preparation, intracoronary radiation and waste management of the Re-188-perrhenate solution using normal radiation shielding first measurements resulted din more than 500 mSv per working day at the fingertips. This extreme high radiation exposure of the personnel were mainly due to direct radiation by touching the evacuated balloon catheter (only residual radionuclides left). to reduced radiation we performed several additional radiation protection measures. The consequent use of plastic shielding of the source, the use of a semiautomatic preparation

Effect of ternary alloying elements on the shape memory behavior of Ti-Ta alloys

International Nuclear Information System (INIS)

Buenconsejo, Pio John S.; Kim, Hee Young; Miyazaki, Shuichi

2009-01-01

The effect of ternary alloying elements (X = V, Cr, Fe, Zr, Hf, Mo, Sn, Al) on the shape memory behavior of Ti-30Ta-X alloys was investigated. All the alloying elements decreased the martensitic transformation temperatures. The decrease in the martensitic transformation start (M s ) temperature due to alloying was affected by the atomic size and number of valence electrons of the alloying element. A larger number of valence electrons and a smaller atomic radius of an alloying element decreased the M s more strongly. The effect of the alloying elements on suppressing the aging effect on the shape memory behavior was also investigated. It was found that the additions of Sn and Al to Ti-Ta were effective in suppressing the effect of aging on the shape memory behavior, since they strongly suppress the formation of ω phase during aging treatment. For this reason the Ti-30Ta-1Al and Ti-30Ta-1Sn alloys exhibited a stable high-temperature shape memory effect during thermal cycling.

Anodic behavior of alloy 22 in bicarbonate containing media: Effect of alloying

International Nuclear Information System (INIS)

Zadorozne, N S; Giordano, C M; Rebak, R B; Ares, A E; Carranza, R M

2012-01-01

Alloy 22 is one of the candidates for the manufacture of high level nuclear waste containers. These containers provide services in natural environments characterized by multi-ionic solutions.It is estimated they could suffer three types of deterioration: general corrosion, localized corrosion (specifically crevice corrosion) and stress corrosion cracking (SCC). It has been confirmed that the presence of bicarbonate and chloride ions is necessary to produce cracking, . It has also been determined that the susceptibility to SCC could be related to the occurrence of an anodic peak in the polarization curves in these media at potentials below transpassivity. The aim of this work is to study the effect of alloying elements on the anodic behavior of Alloy 22 in media containing bicarbonate and chloride ions at different concentrations and temperatures. Polarization curves were made on alloy 22 (Ni-22% Cr-13% Mo), Ni-Mo (Ni-28, 5% Mo) and Ni-Cr (Ni-20% Cr) in the following solutions: 1 mol/L NaCl at 90 o C, and 1.148 mol/L NaHCO 3 ; 1.148 mol/L NaHCO 3 + 1 mol/L NaCl; 1.148 mol/L NaHCO 3 + 0.1 mol/L NaCl, at 90 o C, 75 o C, 60 o C and 25 o C. It was found that alloy 22 has a anodic current density peak at potentials below transpassivity, only in the presence of bicarbonate ions. Curves performed in 1 mol/L NaCl did not show any anodic peak, in any of the tested alloys. The curves made on alloys Ni-Mo and Ni-Cr in the presence of bicarbonate ions, allowed to determine that Cr, is responsible for the appearance of the anodic peak in alloy 22. The curves of alloy Ni-Mo showed no anodic peak in the studied conditions. The potential at which the anodic peak appears in alloy 22 and Ni-Cr alloy, increases with decreasing temperature. The anodic peak was also affected by solution composition. When chloride ion is added to bicarbonate solutions, the anodic peak is shifted to higher potential and current densities, depending on the concentration of added chloride ions (author)

INVESTIGATION OF MAGNESIUM ALLOYS MACHINABILITY

Directory of Open Access Journals (Sweden)

Berat Barıs BULDUM

2013-01-01

Full Text Available Magnesium is the lightest structural metal. Magnesium alloys have a hexagonal lattice structure, which affects the fundamental properties of these alloys. Plastic deformation of the hexagonal lattice is more complicated than in cubic latticed metals like aluminum, copper and steel. Magnesium alloy developments have traditionally been driven by industry requirements for lightweight materials to operate under increasingly demanding conditions. Magnesium alloys have always been attractive to designers due to their low density, only two thirds that of aluminium and its alloys [1]. The element and its alloys take a big part of modern industry needs. Especially nowadays magnesium alloys are used in automotive and mechanical (trains and wagons manufacture, because of its lightness and other features. Magnesium and magnesium alloys are the easiest of all metals to machine, allowing machining operations at extremely high speed. All standard machining operations such as turning, drilling, milling, are commonly performed on magnesium parts.

Characteristics of Film Formed on Alloy 600 and Alloy 690 in Water Containing lead

International Nuclear Information System (INIS)

Hwang Seong Sik; Lee, Deok Hyun; Kim, Hong Pyo; Kim, Joung Soo; Kim, Ju Yup

1999-01-01

Anodic polarization behaviors of Alloy 600 and Alloy 690 have been studied as a function of lead content in the solution of pH 4 and 10 at 90 .deg. C. As the amount of lead in the solution increased, critical current densities and passive current densities of Alloy 600 and Alloy 690 increased, while the breakdown potential of the alloys decreased. The high critical current density in the high lead solution was thought to come from the combination of an enhanced dissolution of constituents on the surface of the alloys by the lead and an anodic dissolution of metallic lead deposited on the surface of the specimens. The morphology of lead precipitated on the specimen after the anodic scan changed with the pH of solution: small irregular particles were precipitated on the surface of the specimen in the solution of pH 4, while the high density of regular sized particles was formed on it in the solution of pH 10.Pb was observed to enhance Cr depletion from the outer surface of Alloy 600 and Alloy 690 and also to increase the ratio of O 2- /OH - in the surface film formed in the high lead solution. The SCC resistance of Alloy 600 and Alloy 690 may have decreased due to the poor quality of the passive film formed and the enhanced oxygen evolution in the solution containing lead

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

International Nuclear Information System (INIS)

Qin, Gaowu W.; Ren Yuping; Huang Wei; Li Song; Pei Wenli

2010-01-01

Graphical abstract: Display Omitted Research highlights: The ε-AlMn phase acts as the heterogeneous nucleus of α-Mg phase during the solidification of the AZ31 Mg alloy, not the γ-Al 8 Mn 5 phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure ε-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 o C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure ε-AlMn, γ 2 -Al 8 Mn 5 or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the ε-AlMn phase in the Mn-Al alloys, not the γ 2 -Al 8 Mn 5 phase. The grain size of AZ31 Mg alloy is about 91 μm without any addition of Mn-Al alloys, but remarkably decreases to ∼55 μm with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to ∼53 μm, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 o C.

Development and utilization of the inorganic polymer materials for {sup 99}Mo-{sup 99m}Tc and {sup 188}W-{sup 188}Re generator based on (n, gamma) method

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Kosuke; Ishikawa, Koji; Terunuma, Hitoshi; Hasegawa, Yoshio; Tatenuma, Katsuyoshi [KAKEN Co., Mito, Ibaraki (Japan)

2003-03-01

A molybdenum (Mo) adsorbent called PZC (Poly Zirconium Compound) with high efficiency of Mo adsorption has been developed in order to generate {sup 99m}Tc from {sup 99}Mo produced from natural Mo by (n, gamma) method. The {sup 99m}Tc generator using PZC has cleared mostly the technical subjects. By the results of many experiments, cold and hot test with {sup 99}Mo activity from low level (10{sup 5} Bq) to high level (10{sup 10} Bq), it has been confirmed that the PZC method can be practically applied for the (n, gamma) {sup 99}Mo-{sup 99m}Tc generator. From the reasons that PZC has the ability and many merits such as high adsorption capacity (>250 mg-Mo/g-PZC) of Mo, high elution yield (av. 80%) of {sup 99m}Tc, the low breakthrough (<0.05 kBq-{sup 99m}Mo/MBq-{sup 99m}Tc) of {sup 99}Mo and others, the current (n, fission) {sup 99m}Tc generator utilizing {sup 99}Mo produced from enriched uranium will be taken the place by PZC method. In this paper, the practicability of PZC and a newly developed functional material PTC(Poly Titanium Compound) as the (n, gamma) {sup 99}Mo-{sup 99m}Tc generator, and an ability of PZC as the {sup 188}W-{sup 188}Re generator will be shown. (author)

Synthesis of Amorphous Powders of Ni-Si and Co-Si Alloys by Mechanical Alloying

Science.gov (United States)

Omuro, Keisuke; Miura, Harumatsu

1991-05-01

Amorphous powders of the Ni-Si and Co-Si alloys are synthesized by mechanical alloying (MA) from crystalline elemental powders using a high energy ball mill. The alloying and amorphization process is examined by X-ray diffraction, differential scanning calorimetry (DSC), and scanning electron microscopy. For the Ni-Si alloy, it is confirmed that the crystallization temperature of the MA powder, measured by DSC, is in good agreement with that of the powder sample prepared by mechanical grinding from the cast alloy ingot products of the same composition.

Preclinical models for an innovative glioblastoma therapeutical strategy by 188Re-SSS encapsulated in nano-tools: translational view

International Nuclear Information System (INIS)

Cikankowitz, A.; Belloche, C.; Verger, E.; Garcion, E.; Hindre, F.; Chassain, G.; Fellah, B.; Abadie, J.; Chouin, N.; Ibisch, C.; Davodeau, F.; Couez, D.; Lepareur, N.; Lacoeuille, F.; Menei, P.

2015-01-01

Full text of publication follows. Aim: Glioblastoma (GBM) is the most frequent cancer of the nervous system and therapies currently used cannot treat definitively this disease. By the way of NucSan (Nuclear for health) program which supports research development about the use of radio pharmaceutics in oncology, the aim of the proposed work is to provide evidences that internal radiotherapy through lipid nanocapsules loaded with Rhenium-188 (LNC 188 Re-SSS) is an alternative therapeutic strategy for GBM that can be translated to human medicine. Previous works have shown a remarkable efficiency of this tool among syngeneic rats linked with local and peripheral recruitments of the immune system's effectors. In this context, two animal models have been chosen to validate the feasibility of this new innovative therapy design (LNC 188 Re-SSS stereotactic injection). Materials and methods: the syngeneic six weeks old C57BL/6J female mice were treated 6 or 12 days after stereotactic GL261 cells implantation, by a single injection of increasing activities of LNC 188 Re-SSS (0,925; 1,85 and 2,7 MBq/5μl). MRI was used to follow tumor progression to determine the mass volume through the selection of regions of interest. The increased median survival time (IMST) was also assessed for treated mice versus control mice (stereotactic injection of saline solution). For long time survival animals (3 times the median survival time), they were rechallenged through the same procedure in the other hemisphere. The brachy-cephalic dog bearing spontaneous tumor will lead to additional evidences to specifically highlight the potential of this innovative technology for GBM treatment. In order to validate procedures of intracerebral injections, a stereotactic head frame specially designed for dog has been conceived which allow both images acquisition (MRI-SPECT and PET) and the achievement of biopsies. Results/Perspectives: as previously observed on rat models, the preliminary data show

Formation and characterization of Al–Ti–Nb alloys by electron-beam surface alloying

Energy Technology Data Exchange (ETDEWEB)

Valkov, S., E-mail: stsvalkov@gmail.com [Institute of Electronics, Bulgarian Academy of Science, 72 Tzarigradsko Chaussee blvd., 1784 Sofia (Bulgaria); Petrov, P. [Institute of Electronics, Bulgarian Academy of Science, 72 Tzarigradsko Chaussee blvd., 1784 Sofia (Bulgaria); Lazarova, R. [Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics Center, Bulgarian Academy of Science, 67 Shipchenski Prohod blvd., 1574 Sofia (Bulgaria); Bezdushnyi, R. [Department of Solid State Physics and Microelectronics, Faculty of Physics, Sofia University “St. Kliment Ohridsky”, 1164 Sofia (Bulgaria); Dechev, D. [Institute of Electronics, Bulgarian Academy of Science, 72 Tzarigradsko Chaussee blvd., 1784 Sofia (Bulgaria)

2016-12-15

Highlights: • Al–Ti–Nb surface alloys have been successfully obtained by electron-beam surface alloying technology. • The alloys consist of (Ti,Nb)Al{sub 3} fractions, distributed in the biphasic structure of (Ti,Nb)Al{sub 3} particles dispersed in α-Al. • The alloying speed does not affect the lattice parameters of (Ti,Nb)Al{sub 3} and, does not form additional stresses, strains etc. • It was found that lower velocity of the specimen motion during the alloying process develops more homogeneous structures. • The measured hardness of (Ti,Nb)Al{sub 3} compound reaches 775 HV[kg/cm{sup 2}] which is much greater than the values of NbAl{sub 3}. - Abstract: The combination of attractive mechanical properties, light weight and resistance to corrosion makes Ti-Al based alloys applicable in many industrial branches, like aircraft and automotive industries etc. It is known that the incorporation of Nb improves the high temperature performance and mechanical properties. In the present study on Al substrate Ti and Nb layers were deposited by DC (Direct Current) magnetron sputtering, followed by electron-beam alloying with scanning electron beam. It was chosen two speeds of the specimen motion during the alloying process: V{sub 1} = 0.5 cm/s and V{sub 2} = 1 cm/s. The alloying process was realized in circular sweep mode in order to maintain the melt pool further. The obtained results demonstrate a formation of (Ti,Nb)Al{sub 3} fractions randomly distributed in biphasic structure of intermetallic (Ti,Nb)Al{sub 3} particles, dispersed in α-Al solid solution. The evaluated (Ti,Nb)Al{sub 3} lattice parameters are independent of the speed of the specimen motion and therefore the alloying speed does not affect the lattice parameters and thus, does not form additional residual stresses, strains etc. It was found that lower velocity of the specimen motion during the alloying process develops more homogeneous structures. The metallographic analyses demonstrate a

Effects of alloying elements on thermal desorption of helium in Ni alloys

International Nuclear Information System (INIS)

Xu, Q.; Cao, X.Z.; Sato, K.; Yoshiie, T.

2012-01-01

It is well known that the minor elements Si and Sn can suppress the formation of voids in Ni alloys. In the present study, to investigate the effects of Si and Sn on the retention of helium in Ni alloys, Ni, Ni–Si, and Ni–Sn alloys were irradiated by 5 keV He ions at 723 K. Thermal desorption spectroscopy (TDS) was performed at up to 1520 K, and microstructural observations were carried out to identify the helium trapping sites during the TDS analysis. Two peaks, at 1350 and 1457 K, appeared in the TDS spectrum of Ni. On the basis of the microstructural observations, the former peak was attributed to the release of trapped helium from small cavities and the latter to its release from large cavities. Small-cavity helium trapping sites were also found in the Ni–Si and Ni–Sn alloys, but no large cavities were observed in these alloys. In addition, it was found that the oversized element Sn could trap He atoms in the Ni–Sn alloy.

Effects of alloying elements on thermal desorption of helium in Ni alloys

Energy Technology Data Exchange (ETDEWEB)

Xu, Q., E-mail: xu@rri.kyoto-u.ac.jp [Research Reactor Institute, Kyoto University, Osaka 590-0494 (Japan); Cao, X.Z.; Sato, K.; Yoshiie, T. [Research Reactor Institute, Kyoto University, Osaka 590-0494 (Japan)

2012-12-15

It is well known that the minor elements Si and Sn can suppress the formation of voids in Ni alloys. In the present study, to investigate the effects of Si and Sn on the retention of helium in Ni alloys, Ni, Ni-Si, and Ni-Sn alloys were irradiated by 5 keV He ions at 723 K. Thermal desorption spectroscopy (TDS) was performed at up to 1520 K, and microstructural observations were carried out to identify the helium trapping sites during the TDS analysis. Two peaks, at 1350 and 1457 K, appeared in the TDS spectrum of Ni. On the basis of the microstructural observations, the former peak was attributed to the release of trapped helium from small cavities and the latter to its release from large cavities. Small-cavity helium trapping sites were also found in the Ni-Si and Ni-Sn alloys, but no large cavities were observed in these alloys. In addition, it was found that the oversized element Sn could trap He atoms in the Ni-Sn alloy.

Effects of alloying elements on thermal desorption of helium in Ni alloys

Science.gov (United States)

Xu, Q.; Cao, X. Z.; Sato, K.; Yoshiie, T.

2012-12-01

It is well known that the minor elements Si and Sn can suppress the formation of voids in Ni alloys. In the present study, to investigate the effects of Si and Sn on the retention of helium in Ni alloys, Ni, Ni-Si, and Ni-Sn alloys were irradiated by 5 keV He ions at 723 K. Thermal desorption spectroscopy (TDS) was performed at up to 1520 K, and microstructural observations were carried out to identify the helium trapping sites during the TDS analysis. Two peaks, at 1350 and 1457 K, appeared in the TDS spectrum of Ni. On the basis of the microstructural observations, the former peak was attributed to the release of trapped helium from small cavities and the latter to its release from large cavities. Small-cavity helium trapping sites were also found in the Ni-Si and Ni-Sn alloys, but no large cavities were observed in these alloys. In addition, it was found that the oversized element Sn could trap He atoms in the Ni-Sn alloy.

High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance

Science.gov (United States)

Hofstetter, J.; Becker, M.; Martinelli, E.; Weinberg, A. M.; Mingler, B.; Kilian, H.; Pogatscher, S.; Uggowitzer, P. J.; Löffler, J. F.

2014-04-01

This article deals with the development of fine-grained high-strength low-alloy (HSLA) magnesium alloys intended for use as biodegradable implant material. The alloys contain solely low amounts of Zn and Ca as alloying elements. We illustrate the development path starting from the high-Zn-containing ZX50 (MgZn5Ca0.25) alloy with conventional purity, to an ultrahigh-purity ZX50 modification, and further to the ultrahigh-purity Zn-lean alloy ZX10 (MgZn1Ca0.3). It is shown that alloys with high Zn-content are prone to biocorrosion in various environments, most probably because of the presence of the intermetallic phase Mg6Zn3Ca2. A reduction of the Zn content results in (Mg,Zn)2Ca phase formation. This phase is less noble than the Mg-matrix and therefore, in contrast to Mg6Zn3Ca2, does not act as cathodic site. A fine-grained microstructure is achieved by the controlled formation of fine and homogeneously distributed (Mg,Zn)2Ca precipitates, which influence dynamic recrystallization and grain growth during hot forming. Such design scheme is comparable to that of HSLA steels, where low amounts of alloying elements are intended to produce a very fine dispersion of particles to increase the material's strength by refining the grain size. Consequently our new, ultrapure ZX10 alloy exhibits high strength (yield strength R p = 240 MPa, ultimate tensile strength R m = 255 MPa) and simultaneously high ductility (elongation to fracture A = 27%), as well as low mechanical anisotropy. Because of the anodic nature of the (Mg,Zn)2Ca particles used in the HSLA concept, the in vivo degradation in a rat femur implantation study is very slow and homogeneous without clinically observable hydrogen evolution, making the ZX10 alloy a promising material for biodegradable implants.

The influence of alloy composition on residual stresses in heat treated aluminium alloys

Energy Technology Data Exchange (ETDEWEB)

Robinson, J.S., E-mail: jeremy.robinson@ul.ie [Department of Mechanical, Aeronautical and Biomedical Engineering, University of Limerick (Ireland); Redington, W. [Materials and Surface Science Institute, University of Limerick (Ireland)

2015-07-15

The as quenched properties of eight different heat treatable aluminium alloys are related to residual stress magnitudes with the objective being to establish if there is a relationship between the residual stress and the as quenched alloy hardness and strength. Near surface residual stresses were assessed with X-ray diffraction using both the established sin{sup 2}ψ method and the more recent cos α technique. Through thickness residual stresses were also characterised using neutron diffraction. The alloys were chosen to encompass a wide range of strengths. The low to medium strength alloys were 6060 and 6082, medium to high strength 2618A, 2014A, 7075, 7010 and two variants of 7449, while the very high strength alloy was the powder metallurgy alloy N707. To assess the as quenched strength, dynamic hardness and tensile properties were determined from samples tested immediately after quenching to minimise the influence of precipitation hardening by natural aging. In addition, hot hardness measurements were made in situ on samples cooled to simulate quench paths. Within the experimental constraints of the investigation, the distribution of residual stress through the thickness was found to follow the same pattern for all the alloys investigated, varying from tensile in the interior to surface compression. The influence of alloy strength was manifested as a change in the observed residual stress magnitudes, and surface residual stresses were found to vary linearly with as quenched hardness and strength. - Highlights: • As quenched aluminium alloys contain high magnitude residual stresses. • Surface is compressive balance by a tensile core. • As quenched surface residual stress is linear function of alloy strength. • In situ hot hardness demonstrates rapid change in intrinsic hardness during rapid cooling.

The ALU+ concept: n-type silicon solar cells with surface passivated screen-printed aluminum-alloyed rear emitter

NARCIS (Netherlands)

Bock, R.; Schmidt, J.; Mau, S.; Hoex, B.; Kessels, W.M.M.; Brendel, R.

2009-01-01

Aluminum-doped p-type (Al-p+) silicon emitters fabricated by means of screen-printing and firing are effectively passivated by plasma-enhanced chemicalvapor deposited (PECVD) amorphous silicon (a-Si) and atomic-layer-deposited (ALD) aluminum oxide (Al2O3) as well as Al2O3/SiNx stacks, where the

WC-3015 alloy (high-temperature alloy)

International Nuclear Information System (INIS)

Anon.

1974-01-01

WC-3015 Nb alloy containing 28 to 30 Hf, 1 to 2 Zr, 13 to 16 W, 0 to 4 Ta, 0 to 5 Ti, 0.07 to 0.33 C, less than or equal to 0.02 N, less than or equal to 0.03 O, less than or equal to 0.001 H was developed for use at high temperature in oxidizing environments. Its composition can be tailored to meet specific requirements. When WC-3015 is exposed to O at elevated temperature, Hf and Nb oxidized preferentially and HfO 2 dissolves in Nb 2 O 5 to form 6HfO-Nb 2 O 5 . This complex oxide has a tight cubic lattice which resists the diffusion of O into the substrate. During 24-h exposure to air at 2400 0 F, the alloy oxidizes to a depth of approximately 0.035 in. with a surface recession of 0 to 0.004 in. Oxidation resistance of WC-3015 welds and base material can be further enhanced greatly by applying silicide coatings. WC-3015 alloy can be machined by conventional and electrical-discharge methods. It can be hot worked readily by extrusion, forging or rolling. Cold working can be used at room or elevated temperature. It can be welded by the electron-beam or Tig processes. Physical constants, typical mechanical properties at 75 to 2400 0 F, and effects of composition and heat treatment on tensile and stress-rupture properties of the alloy are tabulated

Advanced ordered intermetallic alloy deployment

Energy Technology Data Exchange (ETDEWEB)

Liu, C.T.; Maziasz, P.J.; Easton, D.S. [Oak Ridge National Lab., TN (United States)

1997-04-01

The need for high-strength, high-temperature, and light-weight materials for structural applications has generated a great deal of interest in ordered intermetallic alloys, particularly in {gamma}-based titanium aluminides {gamma}-based TiAl alloys offer an attractive mix of low density ({approximately}4g/cm{sup 3}), good creep resistance, and high-temperature strength and oxidation resistance. For rotating or high-speed components. TiAl also has a high damping coefficient which minimizes vibrations and noise. These alloys generally contain two phases. {alpha}{sub 2} (DO{sub 19} structure) and {gamma} (L 1{sub 0}), at temperatures below 1120{degrees}C, the euticoid temperature. The mechanical properties of TiAl-based alloys are sensitive to both alloy compositions and microstructure. Depending on heat-treatment and thermomechanical processing, microstructures with near equiaxed {gamma}, a duplex structure (a mix of the {gamma} and {alpha}{sub 2} phases) can be developed in TiAl alloys containing 45 to 50 at. % Al. The major concern for structural use of TiAl alloys is their low ductility and poor fracture resistance at ambient temperatures. The purpose of this project is to improve the fracture toughness of TiAl-based alloys by controlling alloy composition, microstructure and thermomechanical treatment. This work is expected to lead to the development of TiAl alloys with significantly improved fracture toughness and tensile ductility for structural use.

Impact toughness of laser alloyed aluminium AA1200 alloys

CSIR Research Space (South Africa)

Mabhali, Luyolo AB

2013-08-01

Full Text Available ),. 559-563. [2] T. Tomida, K. Nakata, S. Saji, T. Kubo, T, Formation of metal matrix composite layer on aluminium alloy with TiC-Cu powder by laser surface alloying process; Surface and Coatings Technology; vol. 142-144, 2001, 585-589. [3] L. A. B...

A sulfidation-resistant nickel-base alloy

International Nuclear Information System (INIS)

Lai, G.Y.

1989-01-01

For applications in mildly to moderately sulfidizing environments, stainless steels, Fe-Ni-Cr alloys (e.g., alloys 800 and 330), and more recently Fe-Ni-Cr-Co alloys (e.g., alloy 556) are frequently used for construction of process equipment. However, for many highly sulfidizing environments, few existing commercial alloys have adequate performance. Thus, a new nickel-based alloy containing 27 wt.% Co, 28 wt.% Cr, 4 wt.% Fe, 2.75 wt.% Si, 0.5 wt.% Mn and 0.05 wt.% C (Haynes alloy HR-160) was developed

Irradiation assisted stress corrosion cracking of HTH Alloy X-750 and Alloy 625

International Nuclear Information System (INIS)

Mills, W.J.; Lebo, M.R.; Bajaj, R.; Kearns, J.J.; Hoffman, R.C.; Korinko, J.J.

1994-01-01

In-reactor testing of bolt-loaded precracked compact tension specimens was performed in 360 degree C water to determine effect of irradiation on the SCC behavior of HTH Alloy X-750 and direct aged Alloy 625. Out-of-flux and autoclave control specimens provided baseline data. Primary test variables were stress intensity factor, fluence, chemistry, processing history, prestrain. Results for the first series of experiments were presented at a previous conference. Data from two more recent experiments are compared with previous results; they confirm that high irradiation levels significantly reduce SCC resistance in HTH Alloy X-750. Heat-to-heat differences in IASCC were related to differences in boron content, with low boron heats showing improved SCC resistance. The in-reactor SCC performance of Alloy 625 was superior to that for Alloy X-750, as no cracking was observed in any Alloy 625 specimens even though they were tested at very high K 1 and fluence levels. A preliminary SCC usage model developed for Alloy X-750 indicates that in-reactor creep processes, which relax stresses but also increase crack tip strain rates, and radiolysis effects accelerate SCC. Hence, in-reactor SCC damage under high flux conditions may be more severe than that associated with postirradiation tests. In addition, preliminary mechanism studies were performed to determine the cause of IASCC In Alloy X-750

Improvement of magnetocaloric properties of Gd-Ge-Si alloys by alloying with iron

Directory of Open Access Journals (Sweden)

Erenc-Sędziak T.

2013-01-01

Full Text Available The influence of annealing of Gd5Ge2Si2Fex alloys at 1200°C and of alloying with various amount of iron on structure as well as thermal and magnetocaloric properties is investigated. It was found that annealing for 1 to 10 hours improves the entropy change, but reduces the temperature of maximum magnetocaloric effect by up to 50 K. Prolonged annealing of the Gd5Ge2Si2 alloy results in the decrease of entropy change due to the reduction of Gd5Ge2Si2 phase content. Addition of iron to the ternary alloy enhances the magnetocaloric effect, if x = 0.4 – 0.6, especially if alloying is combined with annealing at 1200°C: the peak value of the isothermal entropy change from 0 to 2 T increases from 3.5 to 11 J/kgK. Simultaneously, the temperature of maximum magnetocaloric effect drops to 250 K. The changes in magnetocaloric properties are related to the change in phase transformation from the second order for arc molten ternary alloy to first order in the case of annealed and/or alloyed with iron. The results of this study indicate that the minor addition of iron and heat treatment to Gd-Ge-Si alloys may be useful in improving the materials’ magnetocaloric properties..

Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design

Energy Technology Data Exchange (ETDEWEB)

Pradeep, K.G. [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany); Materials Chemistry, RWTH Aachen University, Kopernikusstr.10, 52074 Aachen (Germany); Tasan, C.C., E-mail: c.tasan@mpie.de [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany); Yao, M.J. [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany); Deng, Y. [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany); Department of Engineering Design and Materials, Norwegian University of Science and Technology, No-7491 Trondheim (Norway); Springer, H. [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany); Raabe, D., E-mail: d.raabe@mpie.de [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-str.1, 40237 Düsseldorf (Germany)

2015-11-11

The high entropy alloy (HEA) concept has triggered a renewed interest in alloy design, even though some aspects of the underlying thermodynamic concepts are still under debate. This study addresses the short-comings of this alloy design strategy with the aim to open up new directions of HEA research targeting specifically non-equiatomic yet massively alloyed compositions. We propose that a wide range of massive single phase solid solutions could be designed by including non-equiatomic variants. It is demonstrated by introducing a set of novel non-equiatomic multi-component CoCrFeMnNi alloys produced by metallurgical rapid alloy prototyping. Despite the reduced configurational entropy, detailed characterization of these materials reveals a strong resemblance to the well-studied equiatomic single phase HEA: The microstructure of these novel alloys exhibits a random distribution of alloying elements (confirmed by Energy-Dispersive Spectroscopy and Atom Probe Tomography) in a single face-centered-cubic phase (confirmed by X-ray Diffraction and Electron Backscatter Diffraction), which deforms through planar slip (confirmed by Electron-Channeling Contrast Imaging) and leads to excellent ductility (confirmed by uniaxial tensile tests). This approach widens the field of HEAs to non-equiatomic multi-component alloys since the concept enables to tailor the stacking fault energy and associated transformation phenomena which act as main mechanisms to design useful strain hardening behavior.

Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design

International Nuclear Information System (INIS)

Pradeep, K.G.; Tasan, C.C.; Yao, M.J.; Deng, Y.; Springer, H.; Raabe, D.

2015-01-01

The high entropy alloy (HEA) concept has triggered a renewed interest in alloy design, even though some aspects of the underlying thermodynamic concepts are still under debate. This study addresses the short-comings of this alloy design strategy with the aim to open up new directions of HEA research targeting specifically non-equiatomic yet massively alloyed compositions. We propose that a wide range of massive single phase solid solutions could be designed by including non-equiatomic variants. It is demonstrated by introducing a set of novel non-equiatomic multi-component CoCrFeMnNi alloys produced by metallurgical rapid alloy prototyping. Despite the reduced configurational entropy, detailed characterization of these materials reveals a strong resemblance to the well-studied equiatomic single phase HEA: The microstructure of these novel alloys exhibits a random distribution of alloying elements (confirmed by Energy-Dispersive Spectroscopy and Atom Probe Tomography) in a single face-centered-cubic phase (confirmed by X-ray Diffraction and Electron Backscatter Diffraction), which deforms through planar slip (confirmed by Electron-Channeling Contrast Imaging) and leads to excellent ductility (confirmed by uniaxial tensile tests). This approach widens the field of HEAs to non-equiatomic multi-component alloys since the concept enables to tailor the stacking fault energy and associated transformation phenomena which act as main mechanisms to design useful strain hardening behavior.

Alloy Fabrication Laboratory

Data.gov (United States)

Federal Laboratory Consortium — At NETL’s Alloy Fabrication Facility in Albany, OR, researchers conduct DOE research projects to produce new alloys suited to a variety of applications, from gas...

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

Energy Technology Data Exchange (ETDEWEB)

Qin, Gaowu W., E-mail: qingw@smm.neu.edu.c [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China); Ren Yuping; Huang Wei; Li Song; Pei Wenli [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China)

2010-10-08

Graphical abstract: Display Omitted Research highlights: The {epsilon}-AlMn phase acts as the heterogeneous nucleus of {alpha}-Mg phase during the solidification of the AZ31 Mg alloy, not the {gamma}-Al{sub 8}Mn{sub 5} phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure {epsilon}-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 {sup o}C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure {epsilon}-AlMn, {gamma}{sub 2}-Al{sub 8}Mn{sub 5} or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the {epsilon}-AlMn phase in the Mn-Al alloys, not the {gamma}{sub 2}-Al{sub 8}Mn{sub 5} phase. The grain size of AZ31 Mg alloy is about 91 {mu}m without any addition of Mn-Al alloys, but remarkably decreases to {approx}55 {mu}m with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to {approx}53 {mu}m, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 {sup o}C.

Development of pharmaceuticals with radioactive rhenium for cancer therapy. Production of {sup 186}Re and {sup 188}Re, synthesis of labeled compounds and their biodistributions

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Production of the radioactive rhenium isotopes {sup 186}Re and {sup 188}Re, and synthesis of their labeled compounds have been studied together with the biodistributions of the compounds. This work was carried out by the Working Group on Radioactive Rhenium, consisting of researchers of JAERI and some universities, in the Subcommittee for Production and Radiolabeling under the Consultative Committee of Research on Radioisotopes. For {sup 186}Re, production methods by the {sup 185}Re(n,{gamma}){sup 186}Re reaction in a reactor and by the {sup 186}W(p,n){sup 186}Re reaction with an accelerator, which can produce nocarrier-added {sup 186}Re, have been established. For {sup 188}Re, a production method by the double neutron capture reaction of {sup 186}W, which produces a {sup 188}W/{sup 188}Re generator, has been established. For labeling of bisphosphonate, DMSA, DTPA, DADS, aminomethylenephosphonate and some monoclonal antibodies with the radioactive rhenium isotopes, the optimum conditions, including pH, the amounts of reagents and so on, have been determined for each compound. The biodistributions of each of the labeled compounds in mice have been also obtained. (author)

Corrosion-electrochemical and mechanical properties of aluminium-berylium alloys alloyed by rare-earth metals

International Nuclear Information System (INIS)

Safarov, A.M.; Odinaev, Kh.E.; Shukroev, M.Sh.; Saidov, R.Kh.

1997-01-01

In order to study influence of rare earth metals on corrosion-electrochemical and mechanical properties of aluminium-berylium alloys the alloys contain 1 mass % beryllium and different amount of rare earth metals were obtained.-electrochemical and mechanical properties of aluminium-berylium alloys. The electrochemical characteristics of obtained alloys, including stationary potential, potentials of passivation beginning and full passivation, potentials of pitting formation and re passivation were defined.

Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys

Energy Technology Data Exchange (ETDEWEB)

Dasgupta, Rupa, E-mail: rupadasgupta@ampri.res.in; Jain, Ashish Kumar; Kumar, Pravir; Hussain, Shahadat; Pandey, Abhishek

2015-01-25

Highlights: • Cu based SMAs with high transition temperature could be made using LM route. • The properties depend on alloying composition. • Property characterisation establishes feasibility of making SMAs. - Abstract: The effect of alloying seven different elements [Zn, Si, Fe, Ni, Mg, Cr and Ti] on the microstructure, hardness, phase precipitation and transformation temperature in a Cu–12.5Al–5Mn alloy with a view to possible improvements as a result of these additions is the focus of the reported study. The base alloy has been chosen keeping in mind its ability to exhibit shape memory properties and improved ductility over other Cu-based SMAs. The objective was to ascertain changes or improvements attained due to the individual tertiary additions. The samples were prepared through liquid metallurgy route using pure copper, aluminum, manganese and the respective quaternary alloying elements in right quantities to weigh 1000 g of the alloy in total and were melted together. Samples from the cast alloys were subject to homogenisation treatment at 200 °C for 2 h in a muffle furnace and furnace cooled. Samples from the homogenised alloys were heated and held for 2 h at 920 °C followed by ice quenching to obtain the desired martensitic structure for shape memory behaviour. The alloys in the cast, homogenised and quenched conditions were metallographically polished to observe the martensitic phase formation mainly in quenched samples which is a pre requisite for exhibiting shape memory properties in these alloys. X-ray Diffraction studies were carried out on the cast and quenched samples using Cu Kα target; and the phases identified indicate martensitic phase precipitation; however in some cases the precipitation is incomplete. Differential Scanning Calorimetric [DSC] studies were carried out on quenched samples from room temperature to 600 °C maintaining a constant rate of 10 °C/min. Results indicate clear transformation peaks in all the samples which

Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys

International Nuclear Information System (INIS)

Dasgupta, Rupa; Jain, Ashish Kumar; Kumar, Pravir; Hussain, Shahadat; Pandey, Abhishek

2015-01-01

Highlights: • Cu based SMAs with high transition temperature could be made using LM route. • The properties depend on alloying composition. • Property characterisation establishes feasibility of making SMAs. - Abstract: The effect of alloying seven different elements [Zn, Si, Fe, Ni, Mg, Cr and Ti] on the microstructure, hardness, phase precipitation and transformation temperature in a Cu–12.5Al–5Mn alloy with a view to possible improvements as a result of these additions is the focus of the reported study. The base alloy has been chosen keeping in mind its ability to exhibit shape memory properties and improved ductility over other Cu-based SMAs. The objective was to ascertain changes or improvements attained due to the individual tertiary additions. The samples were prepared through liquid metallurgy route using pure copper, aluminum, manganese and the respective quaternary alloying elements in right quantities to weigh 1000 g of the alloy in total and were melted together. Samples from the cast alloys were subject to homogenisation treatment at 200 °C for 2 h in a muffle furnace and furnace cooled. Samples from the homogenised alloys were heated and held for 2 h at 920 °C followed by ice quenching to obtain the desired martensitic structure for shape memory behaviour. The alloys in the cast, homogenised and quenched conditions were metallographically polished to observe the martensitic phase formation mainly in quenched samples which is a pre requisite for exhibiting shape memory properties in these alloys. X-ray Diffraction studies were carried out on the cast and quenched samples using Cu Kα target; and the phases identified indicate martensitic phase precipitation; however in some cases the precipitation is incomplete. Differential Scanning Calorimetric [DSC] studies were carried out on quenched samples from room temperature to 600 °C maintaining a constant rate of 10 °C/min. Results indicate clear transformation peaks in all the samples which

Immunological parameters of dental alloy corrosion; A study of gingival inflammation after placement of stainless steel crown

Directory of Open Access Journals (Sweden)

Ratna Indriyanti

2008-11-01

Full Text Available The dental alloy is widely used in many fields of dentistry as a restoration material, orthodontic, prosthodontic, oral surgery and endodontic treatments. Naturally, most of the metallic materials without exception to stainless steel alloy will experience a process of corrosion in a form of electrochemical reaction to achieve thermodynamic equilibrium. The corrosion process in the oral cavity is due to the reaction of metal with saliva as an oral cavity electrolyte fluid. SSC has preformed restoration material conform with dental anatomy, manufactured from stainless steel alloy which is formable and adaptable to the teeth. Stainless Steel Crown generally made of austenitic stainless steel 18/8 of AISI 304 group contain chrome 18% and Nickel 8%, can be used as a restoration for teeth with excessive caries, crown fracture, email hypoplasia, or restoration after endodontic treatment. The toxic effect of Ni+2 released due to corrosion process may cause an inflammation of the gingiva and periodontal tissue. Laboratorically this condition indicated by the expression of pro-inflammation cytokines as immunological parameters such as IL-6, IL-8, TNF and IL-1β whose main role is to initiate and enhance any inflammation responses. The presence of pro-inflammation cytokines can be detected as soon as 1 hour after placement of SSC by examination of gingival crevicular fluid (GCF by ELISA technique. The magnitude of the toxic effect depends on corrosion rate and ions release which is influenced by metal chemical composition, environment temperature and pH, metal wear due to abrasion and friction, soldering if any, and elongation of the metal. Conclusion: The release of Ni+2 during corrosion process after placement of SSC cause gingival inflammation which is indicated by the change of the immunological parameters.

Fracture of Shape Memory Alloys

OpenAIRE

Miyazaki, Shuichi; Otsuka, Kazuhiro

1981-01-01

The initiation and the propagation of cracks during both quenching and deformation in polycrystalline Cu-Al-Ni alloys have been investigated under various conditions. The fracture surfaces of Ti-Ni and Cu-Al-Ni alloys were also observed by a scanning electron microscope. From these results, it was concluded that the brittleness of Cu-Al-Ni alloy and other β phase alloys are due to large elastic anisotropy and large grain sizes, while that the large ductility in Ti-Ni alloy being due to the sm...

Alloy development for cladding and duct applications

International Nuclear Information System (INIS)

Straalsund, J.L.; Johnson, G.D.

1981-01-01

Three general classes of materials under development for cladding and ducts are listed. Solid solution strengthened, or austenitic, alloys are Type 316 stainless steel and D9. Precipitation hardened (also austenitic) alloys consist of D21, D66 and D68. These alloys are similar to such commercial alloys as M-813, Inconel 706, Inconel 718 and Nimonic PE-16. The third general class of alloys is composed of ferritic alloys, with current emphasis being placed on HT-9, a tempered martensitic alloy, and D67, a delta-ferritic steel. The program is comprised of three parallel paths. The current reference, or first generation alloy, is 20% cold worked Type 316 stainless steel. Second generation alloys for near-term applications include D9 and HT-9. Third generation materials consist of the precipitation strengthened steels and ferritic alloys, and are being considered for implementation at a later time than the first and second generation alloys. The development of second and third generation materials was initiated in 1974 with the selection of 35 alloys. This program has proceeded to today where there are six advanced alloys being evaluated. These alloys are the developmental alloys D9, D21, D57, D66 and D68, together with the commerical alloy, HT-9. The status of development of these alloys is summarized

Labeling Lanreotide with 125I and 188Re. China

International Nuclear Information System (INIS)

Bai Hongsheng

2000-01-01

Lanreotide (D-β-Nal-Cys-Try-D-Trp-Lys-Val-Cys-Thr-NH2) is a new somatostatin analogue. It can bind to human somatostatin receptor (hSSTR) subtype 2 through 5 with high affinity and to hSSTR subtype 1 with low affinity. We investigate labeling condition, quality control and stability in vitro of 125 I-Lanreotide and 188 Re-lanreotide respectively. (A) Lanreotide is labeled with 125 I using Chloramine T. The effect of reaction condition (such as reaction time, pH value, Lanreotide amount, quantity of Chloramine T and reaction volume) on labeling yield is investigated in detail. (B) The labeling yield and radiochemical purity (RP) is measured with paper chromatography (PC) and Sep-Pak C 18 Cartridge. For PC method, 125 I-Lanreotide is spotted on the Whatman No.1 paper and developed in the mixture of CH 3 CH 2 CH 2 CH 2 OH and CH 3 CH 2 OH and NH 4 OH (v/v/v=5:2:1), the Rf value of every component in the mobile phase is given in table 1. For Sep-Pak C 18 Cartridge methods each cartridge is washed with 10 ml of ethanol followed by 10 ml of iso-CH 3 CH 2 CH 2 OH solution. Aliquots of 0.1 mI sample is loaded onto the cartridge, unbound peptide (sodium iodine-125) is eluted with 5 ml of 0.5mol/L sodium acetate solution, 125 I-Lanreotide is eluted with 5 mI of 95% aqueous ethanol solution. (C) The stability of 125 I-Lanreotide in vitro is investigated by labeling compound incubating for 48 hours at 37 deg. C in the 0.9% sodium chloride solution and RP is tested by PC at specific time intervals. (D) Lanreotide is labeled directly with 188 Re via the mixture of citrate and tartate using stannous chloride as reduced agent. The influence of reaction conditions such as pH, temperature, amount of stannous chloride, amount of Lanreotide and reaction time on labeling yield is investigated in detail. At the time, the stability in vitro quality control and animal test are evaluated

Stress corrosion cracking of Alloy 82 in hydrogenated steam at 400 C: influence of microstructural and mechanical parameters on initiation of SCC cracks

International Nuclear Information System (INIS)

Chaumun, Elizabeth

2016-01-01

In Pressurize Water Reactors (PWR), Stress Corrosion Cracking (SCC) is the mean degradation mode of components pieced together by welding. Nickel based alloys are, among others, used in dissimilar metal welding (DMW). International report showed only 3 cracking cases in Alloy 82 out of 300 cracking cases concerned on nickel based alloys DMW in primary water circuit. The aim of this study is to identify which microstructural and local mechanism parameters at microstructure scale provide the initiation of SCC cracks. Characterizations performed on specimen surface to identify those parameters are composed of chemical composition analysis and EBSD analysis (Electron Back-Scattered Diffraction) to know the morphology and the crystallography of grains for microstructure features on one hand, and experimental strain fields measured by Digital Imaging Correlation (DIC) of gold micro-grids deposed by electronic lithography on U-bend specimen surface and stress fields calculated along grains boundaries by finite element for local mechanical features on the other hand. The correlation between those characterizations and localization of initiation sites of SCC cracks, obtained on U-bend specimens tested in autoclave in hydrogen steam water at 400 C and 188 bar for 3500 hours, confirmed the susceptibility of the Alloy 82 in SCC conditions with intergranular SCC cracks. The perpendicular position to the loading direction (mode I) is the worst conditions for grains boundary in SCC. The others points concern the chemical composition (precipitation, impurities) around grain boundary and the grain boundary type which is more susceptible when it is a High Angle Grain Boundary. It is following by the mechanical characterization (stress and strain gradient) along grain boundary. This methodology can be used to other material and helped to define which microstructural and mechanical parameter can be define the initiation of SCC cracks. (author) [fr

ZIRCONIUM-TITANIUM-BERYLLIUM BRAZING ALLOY

Science.gov (United States)

Gilliland, R.G.; Patriarca, P.; Slaughter, G.M.; Williams, L.C.

1962-06-12

A new and improved ternary alloy is described which is of particular utility in braze-bonding parts made of a refractory metal selected from Group IV, V, and VI of the periodic table and alloys containing said metal as a predominating alloying ingredient. The brazing alloy contains, by weight, 40 to 50 per cent zirconium, 40 to 50 per cent titanium, and the balance beryllium in amounts ranging from 1 to 20 per cent, said alloy having a melting point in the range 950 to 1400 deg C. (AEC)

Borated aluminum alloy manufacturing technology

International Nuclear Information System (INIS)

Shimojo, Jun; Taniuchi, Hiroaki; Kajihara, Katsura; Aruga, Yasuhiro

2003-01-01

Borated aluminum alloy is used as the basket material of cask because of its light weight, thermal conductivity and superior neutron absorbing abilities. Kobe Steel has developed a unique manufacturing process for borated aluminum alloy using a vacuum induction melting method. In this process, aluminum alloy is melted and agitated at higher temperatures than common aluminum alloy fabrication methods. It is then cast into a mold in a vacuum atmosphere. The result is a high quality aluminum alloy which has a uniform boron distribution and no impurities. (author)

Grain refinement of an AZ63B magnesium alloy by an Al-1C master alloy

Energy Technology Data Exchange (ETDEWEB)

Yichuan Pan; Xiangfa Liu; Hua Yang [The Key Lab. of Liquid Structure and Heredity of Materials, Shandong Univ., Jinan (China)

2005-12-01

In order to develop a refiner of Mg-Al alloys, an Al-1C (in wt.%) master alloy was synthesized using a casting method. The microstructure and grain-refining performance of the Al-1C master alloy were investigated using X-ray diffraction (XRD), electron probe microanalysis (EPMA) and a grain-refining test. The microstructure of the Al-1C master alloy is composed of {alpha}-Al solid solution, Al{sub 4}C{sub 3} particles, and graphite phases. After grain refinement of AZ63B alloy by the Al-1C master alloy, the mean grain size reached a limit when 2 wt.% Al-C master alloy was added at 800 C and held for 20 min in the melt before casting. The minimum mean grain size is approximately 48 {mu}m at the one-half radius of the ingot and is about 17% of that of the unrefined alloy. The Al-1C master alloy results in better grain refinement than C{sub 2}Cl{sub 6} and MgCO{sub 3} carbon-containing refiners. (orig.)

The physical metallurgy of mechanically-alloyed, dispersion-strengthened Al-Li-Mg and Al-Li-Cu alloys

Science.gov (United States)

Gilman, P. S.

1984-01-01

Powder processing of Al-Li-Mg and Al-Li-Cu alloys by mechanical alloying (MA) is described, with a discussion of physical and mechanical properties of early experimental alloys of these compositions. The experimental samples were mechanically alloyed in a Szegvari attritor, extruded at 343 and 427 C, and some were solution-treated at 520 and 566 C and naturally, as well as artificially, aged at 170, 190, and 210 C for times of up to 1000 hours. All alloys exhibited maximum hardness after being aged at 170 C; lower hardness corresponds to the solution treatment at 566 C than to that at 520 C. A comparison with ingot metallurgy alloys of the same composition shows the MA material to be stronger and more ductile. It is also noted that properly aged MA alloys can develop a better combination of yield strength and notched toughness at lower alloying levels.

De-alloyed platinum nanoparticles

Science.gov (United States)

Strasser, Peter [Houston, TX; Koh, Shirlaine [Houston, TX; Mani, Prasanna [Houston, TX; Ratndeep, Srivastava [Houston, TX

2011-08-09

A method of producing de-alloyed nanoparticles. In an embodiment, the method comprises admixing metal precursors, freeze-drying, annealing, and de-alloying the nanoparticles in situ. Further, in an embodiment de-alloyed nanoparticle formed by the method, wherein the nanoparticle further comprises a core-shell arrangement. The nanoparticle is suitable for electrocatalytic processes and devices.

Variations of color with alloying elements in Pd-free Au-Pt-based high noble dental alloys

International Nuclear Information System (INIS)

Shiraishi, Takanobu; Takuma, Yasuko; Miura, Eri; Fujita, Takeshi; Hisatsune, Kunihiro

2007-01-01

The effects of alloying addition of a small amount of base metals (In, Sn, Fe, Zn) on color variations in Pd-free Au-Pt-based high noble dental alloys were investigated in terms of rectilinear and polar color coordinates. The ternary Au-Pt-X (X = In, Sn, Fe, Zn) and quaternary Au-Pt-In-Y (Y = Sn, Fe, Zn) alloys were prepared from high purity component metals. The amount of alloying base metals, X and Y, were restricted up to 2 at.%. The alloying addition of a small amount of Fe, In, Sn, to a binary Au-10 at.% Pt alloy (referred to as AP10) effectively increased chroma, C *. On the other hand, the addition of Zn to the parent alloy AP10 did not change color coordinates greatly. The increase in chroma in the present Au-Pt-based high noble alloys was attributed to the increase in the slope of spectral reflectance curve at its absorption edge near 515 nm. It was found that the addition of a small amount of Fe to the parent alloy AP10 markedly increased lightness, L *, and the addition of Sn gave a very light tint of red to the parent alloy. Although red-green chromaticity index a * contributed to chroma to some extent, contribution of yellow-blue chromaticity index b * was much greater in determining chroma in this Pd-free Au-Pt-based multi-component alloys. The present results are expected to be valuable in case color is to be taken into account in designing Pd-free Au-Pt-based high noble dental alloys

Variations of color with alloying elements in Pd-free Au-Pt-based high noble dental alloys

Energy Technology Data Exchange (ETDEWEB)

Shiraishi, Takanobu [Department of Dental and Biomedical Materials Science, Unit of Basic Medical Sciences, Graduate School of Biomedical Sciences, Nagasaki University, 1-7-1 Sakamoto, Nagasaki 852-8588 (Japan)]. E-mail: siraisi@nagasaki-u.ac.jp; Takuma, Yasuko [Department of Dental and Biomedical Materials Science, Unit of Basic Medical Sciences, Graduate School of Biomedical Sciences, Nagasaki University, 1-7-1 Sakamoto, Nagasaki 852-8588 (Japan); Miura, Eri [Department of Dental and Biomedical Materials Science, Unit of Basic Medical Sciences, Graduate School of Biomedical Sciences, Nagasaki University, 1-7-1 Sakamoto, Nagasaki 852-8588 (Japan); Fujita, Takeshi [Department of Dental and Biomedical Materials Science, Unit of Basic Medical Sciences, Graduate School of Biomedical Sciences, Nagasaki University, 1-7-1 Sakamoto, Nagasaki 852-8588 (Japan); Hisatsune, Kunihiro [Department of Dental and Biomedical Materials Science, Unit of Basic Medical Sciences, Graduate School of Biomedical Sciences, Nagasaki University, 1-7-1 Sakamoto, Nagasaki 852-8588 (Japan)

2007-06-15

The effects of alloying addition of a small amount of base metals (In, Sn, Fe, Zn) on color variations in Pd-free Au-Pt-based high noble dental alloys were investigated in terms of rectilinear and polar color coordinates. The ternary Au-Pt-X (X = In, Sn, Fe, Zn) and quaternary Au-Pt-In-Y (Y = Sn, Fe, Zn) alloys were prepared from high purity component metals. The amount of alloying base metals, X and Y, were restricted up to 2 at.%. The alloying addition of a small amount of Fe, In, Sn, to a binary Au-10 at.% Pt alloy (referred to as AP10) effectively increased chroma, C *. On the other hand, the addition of Zn to the parent alloy AP10 did not change color coordinates greatly. The increase in chroma in the present Au-Pt-based high noble alloys was attributed to the increase in the slope of spectral reflectance curve at its absorption edge near 515 nm. It was found that the addition of a small amount of Fe to the parent alloy AP10 markedly increased lightness, L *, and the addition of Sn gave a very light tint of red to the parent alloy. Although red-green chromaticity index a * contributed to chroma to some extent, contribution of yellow-blue chromaticity index b * was much greater in determining chroma in this Pd-free Au-Pt-based multi-component alloys. The present results are expected to be valuable in case color is to be taken into account in designing Pd-free Au-Pt-based high noble dental alloys.

Effects of segregation of primary alloying elements on the creep response in magnesium alloys

DEFF Research Database (Denmark)

Huang, Y.D.; Dieringa, H.; Hort, N.

2008-01-01

The segregation of primary alloying elements deteriorates the high temperature creep resistance of magnesium alloys. Annealing at high temperatures alleviating their segregations can improve the creep resistance. Present investigation on the effect of segregation of primary alloying elements...... on the creep response may provide some useful information about how to improve the creep resistance of magnesium alloys in the future. (c) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved....

Design of Hydrogen Storage Alloys/Nanoporous Metals Hybrid Electrodes for Nickel-Metal Hydride Batteries

Science.gov (United States)

Li, M. M.; Yang, C. C.; Wang, C. C.; Wen, Z.; Zhu, Y. F.; Zhao, M.; Li, J. C.; Zheng, W. T.; Lian, J. S.; Jiang, Q.

2016-06-01

Nickel metal hydride (Ni-MH) batteries have demonstrated key technology advantages for applications in new-energy vehicles, which play an important role in reducing greenhouse gas emissions and the world’s dependence on fossil fuels. However, the poor high-rate dischargeability of the negative electrode materials—hydrogen storage alloys (HSAs) limits applications of Ni-MH batteries in high-power fields due to large polarization. Here we design a hybrid electrode by integrating HSAs with a current collector of three-dimensional bicontinuous nanoporous Ni. The electrode shows enhanced high-rate dischargeability with the capacity retention rate reaching 44.6% at a discharge current density of 3000 mA g-1, which is 2.4 times that of bare HSAs (18.8%). Such a unique hybrid architecture not only enhances charge transfer between nanoporous Ni and HSAs, but also facilitates rapid diffusion of hydrogen atoms in HSAs. The developed HSAs/nanoporous metals hybrid structures exhibit great potential to be candidates as electrodes in high-performance Ni-MH batteries towards applications in new-energy vehicles.

Effectiveness of Ti-micro alloying in relation to cooling rate on corrosion of AZ91 Mg alloy

International Nuclear Information System (INIS)

Candan, S.; Celik, M.; Candan, E.

2016-01-01

In this study, micro Ti-alloyed AZ91 Mg alloys (AZ91 + 0.5wt.%Ti) have been investigated in order to clarify effectiveness of micro alloying and/or cooling rate on their corrosion properties. Molten alloys were solidified under various cooling rates by using four stage step mold. The microstructural investigations were carried out by using scanning electron microscopy (SEM). Corrosion behaviors of the alloys were evaluated by means of immersion and electrochemical polarization tests in 3.5% NaCl solution. Results showed that the Mg 17 Al 12 (β) intermetallic phase in the microstructure of AZ91 Mg alloy formed as a net-like structure. The Ti addition has reduced the distribution and continuity of β intermetallic phase and its morphology has emerged as fully divorced eutectic. Compared to AZ91 alloy, the effect of the cooling rate in Ti-added alloy on the grain size was less pronounced. When AZ91 and its Ti-added alloys were compared under the same cooling conditions, the Ti addition showed notably high corrosion resistance. Electrochemical test results showed that while I corr values of AZ91 decrease with the increase in the cooling rate, the effect of the cooling rate on I corr values was much lower in the Ti-added alloy. The corrosion resistance of AZ91 Mg alloy was sensitive towards the cooling rates while Ti-added alloy was not affected much from the cooling conditions. - Highlights: • Effect the cooling rate on grain size was less pronounced in the Ti-added alloy. • The morphology of the β phase transformed into fully divorced eutectics. • Ti addition exhibited significantly higher corrosion resistance. • Ti micro alloying is more effective than faster cooling of the alloy on corrosion.

Labelled biomolecules with SM-153, Re-188 and Y-90 for targeted radiotherapy. Pakistan

International Nuclear Information System (INIS)

Ahmad, Mushtaq; Pervez, Shahid

2000-01-01

Direct labeling of Lanreotide with Rhenium-188 was studied. Reduction of cysteine bridge was performed by reducing agents (ascorbic acid, 2ME). The perrhenate eluted from the generator was reduced with stannous chloride. Tartarate was used as transchelating agent. After pH adjustment, shaking and incubation for various time intervals were carried out. Thin layer chromatography and reverse phase chromatography were used to monitor the radiolabelling yield. Stability of radiolabelled Lanreotide was also checked

Low conversion loss 94 GHz and 188 GHz doublers in InP DHBT technology

DEFF Research Database (Denmark)

Zhurbenko, Vitaliy; Johansen, Tom Keinicke; Squartecchia, Michele

2017-01-01

An Indium Phosphide (InP) Double Heterojunction Bipolar Transistor (DHBT) process has been utilized to design two doublers to cover the 94 GHz and 188 GHz bands. The 94 GHz doubler employs 4-finger DHBTs and provides conversion loss of 2 dB. A maximum output power of nearly 3 dBm is measured whil...... operate over a broad bandwidth. The total circuit area of each chip is 1.41 mm2....

Mechanical and bio-corrosion properties of quaternary Mg–Ca–Mn–Zn alloys compared with binary Mg–Ca alloys

International Nuclear Information System (INIS)

Bakhsheshi-Rad, H.R.; Idris, M.H.; Abdul-Kadir, M.R.; Ourdjini, A.; Medraj, M.; Daroonparvar, M.; Hamzah, E.

2014-01-01

Highlights: • Quaternary alloy show better mechanical and corrosion properties than binary alloy. • Mg–2Ca–0.5Mn–2Zn alloy showed suitable mechanical properties for bone application. • The improved corrosion resistance with addition of Mn and Zn into the Mg–Ca alloy. • Formation of protective surface film Mn-containing magnesium on quaternary alloy. • Secondary phases have strong effect on micro-galvanic corrosion of Mg alloys. - Abstract: Binary Mg–xCa alloys and the quaternary Mg–Ca–Mn–xZn were studied to investigate their bio-corrosion and mechanical properties. The surface morphology of specimens was characterized by X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The results of mechanical properties show that the yield strength (YS), ultimate tensile strength (UTS) and elongation of quaternary alloy increased significantly with the addition of zinc (Zn) up to 4 wt.%. However, further addition of Zn content beyond 4 wt.% did not improve yield strength and ultimate tensile strength. In contrast, increasing calcium (Ca) content has a deleterious effect on binary Mg–Ca alloys. Compression tests of the magnesium (Mg) alloys revealed that the compression strength of quaternary alloy was higher than that of binary alloy. However, binary Mg–Ca alloy showed higher reduction in compression strength after immersion in simulated body fluid. The bio-corrosion behaviour of the binary and quaternary Mg alloys were investigated using immersion tests and electrochemical tests. Electrochemical tests shows that the corrosion potential (E corr ) of binary Mg–2Ca significantly shifted toward nobeler direction from −1996.8 to −1616.6 mV SCE with the addition of 0.5 wt.% manganese (Mn) and 2 wt.% Zn content. However, further addition of Zn to 7 wt.% into quaternary alloy has the reverse effect. Immersion tests show that the quaternary

[Minna Ahokas. Valistus suomalaisessa kirjakulttuurissa 1700-luvulla. Bidrag till kännedom av Finlands natur och folk 188] / Tuija Laine

Index Scriptorium Estoniae

Laine, Tuija, 1964-

2012-01-01

Arvustus: Minna Ahokas. Valistus suomalaisessa kirjakulttuurissa 1700-luvulla. Bidrag till kännedom av Finlands natur och folk 188. Diss. Sasatamala : Finska Vetenskaps-societeten. (Suomen Tiedeseura, 2011)

Search for anomalons produced in nuclear emulsion by 1.88A GeV 40Ar ions

International Nuclear Information System (INIS)

El-Nadi, M.; Badawy, O.E.; El-Nagdy, M.S.; Sadek, N.M.; El-Sourogy, A.A.; Mosaad, M.M.; El-Bakry, M.N.; El-Hamalawy, A.

1987-01-01

The interaction mean free paths of relativistic projectile fragments produced from a 40 Ar beam at 1.88A GeV in nuclear emulsion are measured. No statistically significant anomalously short mean free path is observed for projectile fragments of charges ranging from Ζ = 2 up to Ζ ≥ 10 at such energy. (author)

Tool life equation for blanking 18-8 stainless steel strips

Directory of Open Access Journals (Sweden)

Faura, F.

1998-08-01

Full Text Available Hereinafter it is presented a model for the behaviour and life of circular blanking tool used in sheet forming processes of 18-8 stainless steel (sheet thickness: 1 mm. Firstly it has analyzed the different studies that have previously delt with this problem. Secondly taking into account recently made experiments, it is proposed a simple formulation to predict tool life with enough reliability. To this purpose it has examined different parameters in the wear process, inferring from these the fundamental parameters that regulate them and about which the different equations have been configurated. Blanking tests were performed using a 20 t press at a speed of 150 strokes/min. Punch materials used in these tests were AISI A2 and AISI D2 with diameters between 1.5 and 10 mm. The blanking tests were performed at a clearance between 5 and 20 % of the work material thickness.

En el presente artículo se presenta un modelo de ecuación de vida de herramientas para punzonado circular de chapa de acero inoxidable 18-8 (1 mm de espesor. Se han analizado inicialmente los diferentes estudios que previamente han abordado este problema. Posteriormente, teniendo en cuenta los experimentos realizados recientemente, se propone una formulación simple para predecir con Habilidad suficiente la vida de la herramienta. Para este propósito se han examinado los diferentes parámetros que afectan al proceso de desgaste, infiriendo a partir de estos, los parámetros fundamentales que lo regulan y sobre los cuales se han configurado las diferentes ecuaciones. Los ensayos fueron realizados en una prensa de 20 t y una velocidad de punzonado de 150 golpes/min. Los materiales de los punzones usados en los ensayos fueron AISI A2 y AISI D2 con diámetros comprendidos entre 1,5 y 10 mm. Los ensayos se realizaron para juegos de corte comprendidos entre un 5 y 20 % del espesor de la chapa.

Effect of reversible hydrogen alloying and plastic deformation on microstructure development in titanium alloys

International Nuclear Information System (INIS)

Murzinova, M.A.

2011-01-01

Hydrogen leads to degradation in fracture-related mechanical properties of titanium alloys and is usually considered as a very dangerous element. Numerous studies of hydrogen interaction with titanium alloys showed that hydrogen may be considered not only as an impurity but also as temporary alloying element. This statement is based on the following. Hydrogen stabilizes high-temperature β-phase, leads to decrease in temperature of β→α transformation and extends (α + β )-phase field. The BCC β-phase exhibits lower strength and higher ductility in comparison with HCP α -phase. As a result, hydrogen improves hot workability of hard-to-deform titanium alloys. Hydrogen changes chemical composition of the phases, kinetics of phase transformations, and at low temperatures additional phase transformation (β→α + TiH 2 ) takes place, which is accompanied with noticeable change in volumes of phases. As a result, fine lamellar microstructure may be formed in hydrogenated titanium alloys after heat treatment. It was shown that controlled hydrogen alloying improves weldability and machinability of titanium alloys. After processing hydrogenated titanium preforms are subjected to vacuum annealing, and the hydrogen content decreases up to safe level. Hydrogen removal is accompanied with hydrides dissolution and β→α transformation that makes possible to control structure formation at this final step of treatment. Thus, reversible hydrogen alloying of titanium alloys allows to obtain novel microstructure with enhanced properties. The aim of the work was to study the effect of hydrogen on structure formation, namely: i) influence of hydrogen content on transformation of lamellar microstructure to globular one during deformation in (α+β)-phase field; ii) effect of dissolved hydrogen on dynamic recrystallization in single α- and β- phase regions; iii) influence of vacuum annealing temperature on microstructure development. The work was focused on the optimization of

Physical metallurgy of titanium alloys

International Nuclear Information System (INIS)

Collings, E.W.

1988-01-01

Researches in electric, magnetic, thermophysical properties of titanium alloys in the wide range of temperatures (from helium upto elevated one), as well as stability of phases in alloys of different types are generalized. Fundamental description of physical properties of binary model alloys is given. Acoustic emission, shape memory and Bauschinger effects, pseudoelasticity, aging and other aspects of physical metallurgy of titanium alloys are considered

Fe-Cr-Ni system alloys

International Nuclear Information System (INIS)

Levin, F.L.

1986-01-01

Phase diagram of Fe-Cr-Ni system, which is the basic one for production of corrosion resistant alloys, is considered. Data on corrosion resistance of such alloys are correlated depending on a number of factors: quality and composition of modifying elements, corrosion medium, temperature, alloy structure, mechanical and thermal treatment. Grades of Fe-Ni-Cr alloys are presented, and fields of their application are pointed out

Galvanic corrosion in odontological alloys

International Nuclear Information System (INIS)

Riesgo, O.; Bianchi, G.L.; Duffo, G.S.

1993-01-01

Galvanic corrosion can occur when different alloys are placed in direct contact within the oral cavity or within tissues. Concern has been expressed associated with the coupling of selected restorative materials as well as implant material with various alloys used for restorative procedures. This could be critical if the crown or bridge had subgingival finish line with a metallic zone in contact with the tissue, and the implant was made in titanium alloy. The present work shows the results of galvanic coupling studies done on implants of titanium alloy connected to nickel-chromium and cobalt-chromium alloys. (Author)

Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy

Science.gov (United States)

Hotea, V.; Juhasz, J.; Cadar, F.

2017-05-01

This paper aims to bring some clarification on grain refinement and modification of high strength alloys used in aerospace technique. In this work it was taken into account 7075 Al alloy, and the melt treatment was carried out by placing in the form of master alloy wire ternary AlTiB the casting trough at 730°C. The morphology of the resulting microstructures was characterized by optical microscopy. Micrographs unfinished and finished with pre-alloy containing ternary Al5Ti1B evidence fine crystals, crystal containing no columnar structure and highlights the size of the dendrites, and intermetallic phases occurring at grain boundaries in Al-Zn-Mg-Cu alloy. It has been found that these intermetallic compounds are MgZn2 type. AlTiB master alloys finishing ensures a fine eutectic structure, which determines the properties of hardware and improving the mechanical properties of aluminum alloys used in aeronautical engineering.

Two phase titanium aluminide alloy

Science.gov (United States)

Deevi, Seetharama C.; Liu, C. T.

2001-01-01

A two-phase titanic aluminide alloy having a lamellar microstructure with little intercolony structures. The alloy can include fine particles such as boride particles at colony boundaries and/or grain boundary equiaxed structures. The alloy can include alloying additions such as .ltoreq.10 at % W, Nb and/or Mo. The alloy can be free of Cr, V, Mn, Cu and/or Ni and can include, in atomic %, 45 to 55% Ti, 40 to 50% Al, 1 to 5% Nb, 0.3 to 2% W, up to 1% Mo and 0.1 to 0.3% B. In weight %, the alloy can include 57 to 60% Ti, 30 to 32% Al, 4 to 9% Nb, up to 2% Mo, 2 to 8% W and 0.02 to 0.08% B.

Studies of the AA2519 Alloy Hot Rolling Process and Cladding with EN AW-1050A Alloy

Directory of Open Access Journals (Sweden)

Płonka B.

2016-03-01

Full Text Available The objective of the study was to determine the feasibility of plastic forming by hot rolling of the AA2519 aluminium alloy sheets and cladding these sheets with a layer of the EN AW-1050A alloy. Numerous hot-rolling tests were carried out on the slab ingots to define the parameters of the AA2519 alloy rolling process. It has been established that rolling of the AA2519 alloy should be carried out in the temperature range of 400-440°C. Depending on the required final thickness of the sheet metal, appropriate thickness of the EN AW-1050A alloy sheet, used as a cladding layer, was selected. As a next step, structure and mechanical properties of the resulting AA2519 alloy sheets clad with EN AW-1050A alloy was examined. The thickness of the coating layer was established at 0,3÷0,5mm. Studies covered alloy grain size and the core alloy-cladding material bond strength.

Investigation of a hot-pressed Nb–Ti–Al alloy: Mechanical alloying, microstructure and mechanical property

Energy Technology Data Exchange (ETDEWEB)

Shi, Zhiwu; Wei, Hua; Zhang, Hongyu; Jin, Tao; Sun, Xiaofeng; Zheng, Qi, E-mail: qzheng@imr.ac.cn

2016-01-10

The Nb–23Ti–15Al (at%) alloy was prepared by mechanical alloying (MA) and hot-pressing (HPing). The microstructure evolution of powder particles during MA and its influence on the microstructure and mechanical properties of the hot-pressed (HPed) alloy have been investigated. The powder and HPed alloy were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicate that particle size increases in the first stage and then decreases in the second stage during MA; as milling speed increases, mechanically alloyed (MAed) powder with convoluted elemental lamellae, homogeneous Nb solid-solution and an amorphous phase could be obtained respectively in 24 h. Higher homogeneity in microstructure and composition of the MAed powder particles promotes the precipitation of the δ phase and refines the β and Ti(O,C) phases in the HPed alloy. Moreover, due to the phase equilibrium changes caused by Fe and Cr in the amorphous powder, σ phase appears in the alloy as a stable phase instead of the δ phase. Properly MAed powder contributes to higher hardness of the HPed alloy, for reasons of microstructure refinement and sufficient precipitating of strengthening phases.

Investigation of a hot-pressed Nb–Ti–Al alloy: Mechanical alloying, microstructure and mechanical property

International Nuclear Information System (INIS)

Shi, Zhiwu; Wei, Hua; Zhang, Hongyu; Jin, Tao; Sun, Xiaofeng; Zheng, Qi

2016-01-01

The Nb–23Ti–15Al (at%) alloy was prepared by mechanical alloying (MA) and hot-pressing (HPing). The microstructure evolution of powder particles during MA and its influence on the microstructure and mechanical properties of the hot-pressed (HPed) alloy have been investigated. The powder and HPed alloy were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicate that particle size increases in the first stage and then decreases in the second stage during MA; as milling speed increases, mechanically alloyed (MAed) powder with convoluted elemental lamellae, homogeneous Nb solid-solution and an amorphous phase could be obtained respectively in 24 h. Higher homogeneity in microstructure and composition of the MAed powder particles promotes the precipitation of the δ phase and refines the β and Ti(O,C) phases in the HPed alloy. Moreover, due to the phase equilibrium changes caused by Fe and Cr in the amorphous powder, σ phase appears in the alloy as a stable phase instead of the δ phase. Properly MAed powder contributes to higher hardness of the HPed alloy, for reasons of microstructure refinement and sufficient precipitating of strengthening phases.

Structure of the Kπ = 4+ bands in 186,188Os

Science.gov (United States)

Phillips, A. A.; Garrett, P. E.; Bettermann, L.; Braun, N.; Burke, D. G.; Demand, G. A.; Faestermann, T.; Finlay, P.; Green, K. L.; Hertenberger, R.; Krü; cken, R.; Leach, K. G.; Schumaker, M. A.; Svensson, C. E.; Wirth, H.-F.; Wong, J.

2009-01-01

The structures of 3+ states in Os have been debated over several decades. Based on measured B(E2) values they were interpreted in 186-192Os as Kπ = 4+ two-phonon vibrations, whereas inelastic scattering, and (t,α) work imply a hexadecapole phonon description. To clarify the nature of these Kπ = 4+ bands in 186,188Os, we performed a (3He,d) reaction on 185,187Re targets using 30 MeV 3He beams and a Q3D spectrograph. Absolute cross sections were obtained for excited states up to 3 MeV at 9 angles from 5° to 50°. Results indicate a significant 5/2+[402]π+3/2+[402]π component in agreement with quasiparticle phonon model predictions for a single hexadecapole phonon structure.

Structure of the Kπ=4+ bands in Os186,188

Science.gov (United States)

Phillips, A. A.; Garrett, P. E.; Lo Iudice, N.; Sushkov, A. V.; Bettermann, L.; Braun, N.; Burke, D. G.; Demand, G. A.; Faestermann, T.; Finlay, P.; Green, K. L.; Hertenberger, R.; Leach, K. G.; Krücken, R.; Schumaker, M. A.; Svensson, C. E.; Wirth, H.-F.; Wong, J.

2010-09-01

The (He3,d) single-proton stripping reaction has been performed on targets of Re185,187 to investigate the structures of the 43+ states in Os186,188. The experiment employed 30 MeV He3 beams, and the reaction products were analyzed with a Q3D spectrograph. Absolute cross sections were determined at nine angles between 5° and 50° for states up to approximately 3 MeV in excitation energy. Large (5)/(2)+[402]π+(3)/(2)+[402]π two-quasiparticle components are deduced for the 43+ levels of both isotopes. Their magnitudes are in agreement with calculations performed using the quasiparticle phonon model, which predicts a coexistence of a large hexadecapole with a smaller, but sizable, γ-γ component in the 43+.

A new technique to modify hypereutectic Al-24%Si alloys by a Si-P master alloy

Energy Technology Data Exchange (ETDEWEB)

Wu Yaping; Wang Shujun; Li Hui [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, 73 Jingshi Road, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn

2009-05-27

The modification effect of a Si-P master alloy on Al-24%Si alloy was investigated by using electron probe micro-analyzer (EPMA) and optical microscopy (OM). The dissolution problem of the Si-P master alloys was solved by changing the sequence of addition. When the Si-P master alloy was added into Al melt before the addition of silicon, the best modification effect could be achieved. The modification parameters of the master alloy on Al-24%Si alloy were optimized through designing and analyzing the orthogonal experiment, and their influences on the modification effect were discussed. The results show that the influence of temperature on the modification effect is the greatest, followed by the addition level, and the holding time is the least. The optimized modification parameters are the modification temperature of 810 deg. C, the addition level of 0.35 wt.%, the holding time of 30 min + 50 min whose meaning is that the Si-P master alloy is added firstly to the molten Al, and silicon is added 30 min later, then holding another 50 min. In addition, the modification mechanism of the Si-P master alloy on Al-24%Si alloy was also discussed.

Study on microstructure and properties of Mg-alloy surface alloying layer fabricated by EPC

Directory of Open Access Journals (Sweden)

Chen Dongfeng

2010-02-01

Full Text Available AZ91D surface alloying was investigated through evaporative pattern casting (EPC technology. Aluminum powder (0.074 to 0.104 mm was used as the alloying element in the experiment. An alloying coating with excellent properties was fabricated, which mainly consisted of adhesive, co-solvent, suspending agent and other ingredients according to desired proportion. Mg-alloy melt was poured under certain temperature and the degree of negative pressure. The microstructure of the surface layer was examined by means of scanning electron microscopy. It has been found that a large volume fraction of network new phases were formed on the Mg-alloy surface, the thickness of the alloying surface layer increased with the alloying coating increasing from 0.3 mm to 0.5 mm, and the microstructure became compact. Energy dispersive X-ray (EDX analysis was used to determine the chemical composition of the new phases. It showed that the new phases mainly consist of β-Mg17Al12, in addition to a small quantity of inter-metallic compounds and oxides. A micro-hardness test and a corrosion experiment to simulate the effect of sea water were performed. The result indicated that the highest micro-hardness of the surface reaches three times that of the matrix. The corrosion rate of alloying samples declines to about a fifth of that of the as-cast AZ91D specimen.

Dispersion strengthening of precipitation hardened Al-Cu-Mg alloys prepared by rapid solidification and mechanical alloying

Science.gov (United States)

Gilman, P. S.; Sankaran, K. K.

1988-01-01

Several Al-4Cu-1Mg-1.5Fe-0.75Ce alloys have been processed from either rapidly solidified or mechanically alloyed powder using various vacuum degassing parameters and consolidation techniques. Strengthening by the fine subgrains, grains, and the dispersoids individually or in combination is more effective when the alloys contain shearable precipitates; consequently, the strength of the alloys is higher in the naturally aged rather than the artificially aged condition. The strengths of the mechanically alloyed variants are greater than those produced from prealloyed powder. Properties and microstructural features of these dispersion strengthened alloys are discussed in regards to their processing histories.

Pilot-plant testing of materials proposed for use as NWCF feed and fuel nozzle caps

International Nuclear Information System (INIS)

Birrer, S.A.

1980-12-01

Results of a series of tests performed on materials proposed for use at New Waste Calcining Facility (NWCF) fuel and feed nozzle caps are described. Results show that Haynes Alloys 25 and 188 and Inconel Alloys 617, 625, and 690 have acceptable corrosion and erosion rates based upon the high-temperature oxidation, erosion, and corrosion tests conducted

The Development of the Low-Cost Titanium Alloy Containing Cr and Mn Alloying Elements

Science.gov (United States)

Zhu, Kailiang; Gui, Na; Jiang, Tao; Zhu, Ming; Lu, Xionggang; Zhang, Jieyu; Li, Chonghe

2014-04-01

The α + β-type Ti-4.5Al-6.9Cr-2.3Mn alloy has been theoretically designed on the basis of assessment of the Ti-Al-Cr-Mn thermodynamic system and the relationship between the molybdenum equivalent and mechanical properties of titanium alloys. The alloy is successfully prepared by the split water-cooled copper crucible, and its microstructures and mechanical properties at room temperature are investigated using the OM, SEM, and the universal testing machine. The results show that the Ti-4.5Al-6.9Cr-2.3Mn alloy is an α + β-type alloy which is consistent with the expectation, and its fracture strength, yield strength, and elongation reach 1191.3, 928.4 MPa, and 10.7 pct, respectively. Although there is no strong segregation of alloying elements under the condition of as-cast, the segregation of Cr and Mn is obvious at the grain boundary after thermomechanical treatment.

Effect of Al alloying on the martensitic temperature in Ti-Ta shape memory alloys

Energy Technology Data Exchange (ETDEWEB)

Ferrari, Alberto; Rogal, Jutta; Drautz, Ralf [Interdisciplinary Centre for Advanced Materials Simulation, Ruhr-Universitaet Bochum (Germany)

2017-07-01

Ti-Ta-based alloys are promising candidates as high temperature shape memory alloys (HTSMAs) for actuators and superelastic applications. The shape memory mechanism involves a martensitic transformation between the low-temperature α'' phase (orthorhombic) and the high-temperature β phase (body-centered cubic). In order to prevent the degradation of the shape memory effect, Ti-Ta needs to be alloyed with further elements. However, this often reduces the martensitic temperature M{sub s}, which is usually strongly composition dependent. The aim of this work is to analyze how the addition of a third element to Ti-Ta alloys affects M{sub s} by means of electronic structure calculations. In particular, it will be investigated how alloying Al to Ti-Ta alters the relative stability of the α'' and β phases. This understanding will help to identify new alloy compositions featuring both a stable shape memory effect and elevated transformation temperatures.

Density of Liquid Ni-Cr Alloy

Institute of Scientific and Technical Information of China (English)

无

2003-01-01

The density of liquid Ni-Cr alloy was measured by a modified sessile drop method. The density of liquid Ni-Cr alloywas found to decrease with increasing temperature and Cr concentration in the alloy. The molar volume of liquidNi-Cr alloy increases with increasing the Cr concentration in the alloy. The molar volume of Ni-Cr alloy determinedin the present work shows a positive deviation from the linear molar volume.

Conversion of agroindustrial residues for high poly(γ-glutamic acid) production by Bacillus subtilis NX-2 via solid-state fermentation.

Science.gov (United States)

Tang, Bao; Xu, Hong; Xu, Zongqi; Xu, Cen; Xu, Zheng; Lei, Peng; Qiu, Yibin; Liang, Jinfeng; Feng, Xiaohai

2015-04-01

Poly(γ-glutamic acid) (γ-PGA) production by Bacillus subtilis NX-2 was carried out through solid-state fermentation with dry mushroom residues (DMR) and monosodium glutamate production residues (MGPR; a substitute of glutamate) for the first time. Dry shiitake mushroom residue (DSMR) was found to be the most suitable solid substrate among these DMRs; the optimal DSMR-to-MGPR ratio was optimized as 12:8. To increase γ-PGA production, industrial waste glycerol was added as a carbon source supplement to the solid-state medium. As a result, γ-PGA production increased by 34.8%. The batch fermentation obtained an outcome of 115.6 g kg(-1) γ-PGA and 39.5×10(8) colony forming units g(-1) cells. Furthermore, a satisfactory yield of 107.7 g kg(-1) γ-PGA was achieved by compost experiment on a scale of 50 kg in open air, indicating that economically large-scale γ-PGA production was feasible. Therefore, this study provided a novel method to produce γ-PGA from abundant and low-cost agroindustrial residues. Copyright © 2015 Elsevier Ltd. All rights reserved.

Low activation ferritic alloys

Science.gov (United States)

Gelles, David S.; Ghoniem, Nasr M.; Powell, Roger W.

1986-01-01

Low activation ferritic alloys, specifically bainitic and martensitic stainless steels, are described for use in the production of structural components for nuclear fusion reactors. They are designed specifically to achieve low activation characteristics suitable for efficient waste disposal. The alloys essentially exclude molybdenum, nickel, nitrogen and niobium. Strength is achieved by substituting vanadium, tungsten, and/or tantalum in place of the usual molybdenum content in such alloys.

Impact of the De-Alloying Kinetics and Alloy Microstructure on the Final Morphology of De-Alloyed Meso-Porous Metal Films

Directory of Open Access Journals (Sweden)

Bao Lin

2014-10-01

Full Text Available Nano-textured porous metal materials present unique surface properties due to their enhanced surface energy with potential applications in sensing, molecular separation and catalysis. In this paper, commercial alloy foils, including brass (Cu85Zn15 and Cu70Zn30 and white gold (Au50Ag50 foils have been chemically de-alloyed to form nano-porous thin films. The impact of the initial alloy micro-structure and number of phases, as well as chemical de-alloying (DA parameters, including etchant concentration, time and solution temperature on the final nano-porous thin film morphology and properties were investigated by electron microscopy (EM. Furthermore, the penetration depth of the pores across the alloys were evaluated through the preparation of cross sections by focus ion beam (FIB milling. It is demonstrated that ordered pores ranging between 100 nm and 600 nm in diameter and 2–5 μm in depth can be successfully formed for the range of materials tested. The microstructure of the foils were obtained by electron back-scattered diffraction (EBSD and linked to development of pits across the material thickness and surface during DA. The role of selective etching of both noble and sacrificial metal phases of the alloy were discussed in light of the competitive surface etching across the range of microstructures and materials tested.

Preparation of Copper and Chromium Alloyed Layers on Pure Titanium by Plasma Surface Alloying Technology

Science.gov (United States)

He, Xiaojing; Li, Meng; Wang, Huizhen; Zhang, Xiangyu; Tang, Bin

2015-05-01

Cu-Cr alloyed layers with different Cu and Cr contents on pure titanium were obtained by means of plasma surface alloying technology. The microstructure, chemical composition and phase composition of Cu-Cr alloyed layers were analyzed by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD), respectively. The experimental results demonstrate that the alloyed layers are bonded strongly to pure titanium substrate and consist of unbound Ti, CuTi, Cu3Ti, CuTi3 and Cr2Ti. The thickness of Cu5Cr5 and Cu7Cr3 alloyed layer are about 18 μm and 28 μm, respectively. The antibacterial properties against gram-negative Escherichia coli (E.coli, ATCC10536) and gram-positive Staphylococcus aureus (S. aureus, ATCC6538) of untreated pure titanium and Cu-Cr alloyed specimen were investigated by live/dead fluorescence staining method. The study shows that Cu-Cr alloyed layers exhibit excellent antibacterial activities against both E.coli and S.aureus within 24 h, which may be attributed to the formation of Cu-containing phases.

Preparation of a high strength Al–Cu–Mg alloy by mechanical alloying and press-forming

International Nuclear Information System (INIS)

Tang Huaguo; Cheng Zhiqiang; Liu Jianwei; Ma Xianfeng

2012-01-01

Highlights: ► A high strength aluminum alloy of Al–2 wt.%Mg–2 wt.%Cu has been prepared by mechanical alloying and press-forming. ► The alloy only consists of solid solution α-Al. ► The grains size of α-Al was about 300 nm–5 μm. ► The solid solution strengthening and the grain refinement strengthening are the main reasons for such a high strength. - Abstract: A high strength aluminum alloy, with the ratio of 96 wt.%Al–2 wt.%Mg–2 wt.%Cu, has been prepared by mechanical alloying and press-forming. The alloy exhibited a high tensile strength of 780 MPa and a high microhardness of 180 HV. X-ray diffraction characterizations confirmed that the alloy only consists of a solid solution α-Al. Microstructure characterizations revealed that the grain size of α-Al was about 300 nm–5 μm. The solid solution strengthening and the grain refinement strengthening were considered to be the reason for such a high strength.

Preparation of a high strength Al-Cu-Mg alloy by mechanical alloying and press-forming

Energy Technology Data Exchange (ETDEWEB)

Tang Huaguo [State Key Laboratory of Rare Earth Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Cheng Zhiqiang [College of Resources and Environment, Jilin Agricultural University, Changchun 130118 (China); Liu Jianwei [State Key Laboratory of Rare Earth Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Ma Xianfeng, E-mail: xfma@ciac.jl.cn [State Key Laboratory of Rare Earth Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China)

2012-07-30

Highlights: Black-Right-Pointing-Pointer A high strength aluminum alloy of Al-2 wt.%Mg-2 wt.%Cu has been prepared by mechanical alloying and press-forming. Black-Right-Pointing-Pointer The alloy only consists of solid solution {alpha}-Al. Black-Right-Pointing-Pointer The grains size of {alpha}-Al was about 300 nm-5 {mu}m. Black-Right-Pointing-Pointer The solid solution strengthening and the grain refinement strengthening are the main reasons for such a high strength. - Abstract: A high strength aluminum alloy, with the ratio of 96 wt.%Al-2 wt.%Mg-2 wt.%Cu, has been prepared by mechanical alloying and press-forming. The alloy exhibited a high tensile strength of 780 MPa and a high microhardness of 180 HV. X-ray diffraction characterizations confirmed that the alloy only consists of a solid solution {alpha}-Al. Microstructure characterizations revealed that the grain size of {alpha}-Al was about 300 nm-5 {mu}m. The solid solution strengthening and the grain refinement strengthening were considered to be the reason for such a high strength.

Nano-structureal and nano-chemical analysis of Ni-based alloy/low alloy steel dissimilar metal weld interfaces

International Nuclear Information System (INIS)

Choi, Kyoung Joon; Shin, Sang Hun; Kim, Jong Jin; Jung, Ju Ang; Kim, Ji Hyun

2012-01-01

The dissimilar metal joints welded between Ni-based alloy, Alloy 690 and low alloy steel, A533 Gr. B with Alloy 152 filler metal were characterized by using optical microscope, scanning electron microscope, transmission electron microscope, secondary ion mass spectrometry and 3-dimensional atom probe tomography. It was found that in the weld root region, the weld was divided into several regions including unmixed zone in Ni-base alloy, fusion boundary, and heat-affected zone in the low alloy steel. The result of nanostructural and nanochemical analyses in this study showed the non-homogeneous distribution of elements with higher Fe but lower Mn, Ni and Cr in A533 Gr. B compared with Alloy 152, and the precipitation of carbides near the fusion boundary.

Nano-structureal and nano-chemical analysis of Ni-based alloy/low alloy steel dissimilar metal weld interfaces

Energy Technology Data Exchange (ETDEWEB)

Choi, Kyoung Joon; Shin, Sang Hun; Kim, Jong Jin; Jung, Ju Ang; Kim, Ji Hyun [Interdisciplinary School of Green Energy, Ulsan National Institute of Science and Technology (UNIST), Ulsan (Korea, Republic of)

2012-06-15

The dissimilar metal joints welded between Ni-based alloy, Alloy 690 and low alloy steel, A533 Gr. B with Alloy 152 filler metal were characterized by using optical microscope, scanning electron microscope, transmission electron microscope, secondary ion mass spectrometry and 3-dimensional atom probe tomography. It was found that in the weld root region, the weld was divided into several regions including unmixed zone in Ni-base alloy, fusion boundary, and heat-affected zone in the low alloy steel. The result of nanostructural and nanochemical analyses in this study showed the non-homogeneous distribution of elements with higher Fe but lower Mn, Ni and Cr in A533 Gr. B compared with Alloy 152, and the precipitation of carbides near the fusion boundary.

Superconducting alloys

International Nuclear Information System (INIS)

Bowers, J.E.

1976-01-01

Reference is made to superconductors having high critical currents. The superconductor described comprises an alloy consisting of a matrix of a Type II superconductor which is a homogeneous mixture of 50 to 95 at.% Pb and 5 to 40 at.%Bi and/or 10 to 50 at.%In. Dispersed in the matrix is a material to provide pinning centres comprising from 0.01% to 20% by volume of the alloy; this material is a stable discontinuous phase of discrete crystalline particles of Cu, Mn, Te, Se, Ni, Ca, Cr, Ce, Ge or La, either in the form of the element or a compound with a component of the matrix. These particles should have an average diameter of not more than 2μ. A method for making this alloy is described. (U.K.)

Imparting passivity to vapor deposited magnesium alloys

Science.gov (United States)

Wolfe, Ryan C.

Magnesium has the lowest density of all structural metals. Utilization of low density materials is advantageous from a design standpoint, because lower weight translates into improved performance of engineered products (i.e., notebook computers are more portable, vehicles achieve better gas mileage, and aircraft can carry more payload). Despite their low density and high strength to weight ratio, however, the widespread implementation of magnesium alloys is currently hindered by their relatively poor corrosion resistance. The objective of this research dissertation is to develop a scientific basis for the creation of a corrosion resistant magnesium alloy. The corrosion resistance of magnesium alloys is affected by several interrelated factors. Among these are alloying, microstructure, impurities, galvanic corrosion effects, and service conditions, among others. Alloying and modification of the microstructure are primary approaches to controlling corrosion. Furthermore, nonequilibrium alloying of magnesium via physical vapor deposition allows for the formation of single-phase magnesium alloys with supersaturated concentrations of passivity-enhancing elements. The microstructure and surface morphology is also modifiable during physical vapor deposition through the variation of evaporation power, pressure, temperature, ion bombardment, and the source-to-substrate distance. Aluminum, titanium, yttrium, and zirconium were initially chosen as candidates likely to impart passivity on vapor deposited magnesium alloys. Prior to this research, alloys of this type have never before been produced, much less studied. All of these metals were observed to afford some degree of corrosion resistance to magnesium. Due to the especially promising results from nonequilibrium alloying of magnesium with yttrium and titanium, the ternary magnesium-yttrium-titanium system was investigated in depth. While all of the alloys are lustrous, surface morphology is observed under the scanning

Strength and fracture of two-phase alloys: a comparison of two alloy systems

International Nuclear Information System (INIS)

Gurland, J.

1978-01-01

The functional roles of the hard and soft constituents in the deformation and fracture of two-phase alloys are discussed on the basis of two commercially important alloy systems, namely spheroidized carbon steels and cemented carbides, WC-Co. A modified rule of mixtures provides a structural approach to the yield and flow strength. Consideration of the fracture toughness is attempted by means of a phenomenological modelling of the fracture process on the microscale. While there are large differences in properties between the two alloys, the deformation and fracture processes show broad smilarities which are associated with the features of the interaction between constituents common to both alloys

Passive Corrosion Behavior of Alloy 22

International Nuclear Information System (INIS)

R.B. Rebak; J.H. Payer

2006-01-01

Alloy 22 (NO6022) was designed to stand the most aggressive industrial applications, including both reducing and oxidizing acids. Even in the most aggressive environments, if the temperature is lower than 150 F (66 C) Alloy 22 would remain in the passive state having particularly low corrosion rates. In multi-ionic solutions that may simulate the behavior of concentrated ground water, even at near boiling temperatures, the corrosion rate of Alloy 22 is only a few nano-meters per year because the alloy is in the complete passive state. The corrosion rate of passive Alloy 22 decreases as the time increases. Immersion corrosion testing also show that the newer generation of Ni-Cr-Mo alloys may offer a better corrosion resistance than Alloy 22 only in some highly aggressive conditions such as in hot acids

Corrosion-electrochemical behaviour and mechanical properties ofaluminium alloy-321, alloyed by barium

International Nuclear Information System (INIS)

Ganiev, I.; Mukhiddinov, G.N.; Kargapolova, T.V.; Mirsaidov, U.

1995-01-01

The purpose of present work is studying of influence of barium additionson electrochemical corrosion of casting aluminium-copper alloy Al-321,containing as base alloying components copper, chromium, manganese, titanium,zirconium, cadmium

Coupling between bulk ordering and surface segregation: from alloy surfaces to surface alloys

International Nuclear Information System (INIS)

Gallis, Coralie

1997-01-01

-The knowledge of the alloy surfaces is of prime interest to understand their catalytic properties. On the one hand, the determination of the stability of the surface alloys depends very strongly on the behaviours of the A c B 1-c alloy surfaces. On the other hand, the knowledge of the kinetics of the formation-dissolution of surface alloys can allow to understand the equilibrium segregation isotherm. We have then studied the relation between the equilibrium surface segregation in an alloy A c B 1-c and the kinetics of dissolution of a few metallic layers of A/B and the inverse deposit. We have used an energetic model derived from the electronic structure (T.I.B.M.) allowing us to study the surface segregation both in the disordered state and in the ordered one. The kinetics of dissolution were studied using the kinetic version of this model (K.T.I.B.M.) consistent with the equilibrium model. To illustrate our study, we have chosen the Cu-Pd system, a model for the formation of surface alloys and for which a great number of studies, both experimental and theoretical, are in progress. We then have shown for the (111) surface of this system that the surface alloys obtained during the dissolution are related to the alloy surfaces observed for the equilibrium segregation. The Cu-Pd system is characteristic of systems which have a weak segregation energy. Then, we have performed an equivalent study for a system with a strong segregation energy. Our choice was directly put on the Pt-Sn system. The surface behaviour, both in equilibrium and during the kinetics of dissolution, is very different from the Cu-Pd case. In particular, we have found pure 2-D surface alloys. Finally, a quenched molecular dynamics study has allowed us to determine the relative stability of various possible surface superstructures. (author) [fr

ODS Alloys for Nuclear Applications

International Nuclear Information System (INIS)

Jang, Jin Sung

2006-01-01

ODS (oxide dispersion strengthening) alloy is one of the potential candidate alloys for the cladding or in reactor components of Generation IV reactors and for the structural material even for fusion reactors. It is widely accepted as very resistant material to neutron irradiation as well as strong material at high temperature due to its finely distributed and stable oxide particles. Among Generation IV reactors SFR and SCWR are anticipated in general to run in the temperature range between 300 and 550 .deg. C, and the peak cladding temperature is supposed to reach at about 620 .deg. C during the normal operation. Therefore Zr.base alloys, which have been widely known and adopted for the cladding material due to their excellent neutron economics, are no more adequate at these operating conditions. Fe-base ODS alloys in general has a good high temperature strength at the above high temperature as well as the neutron resistance. In this study a range of commercial grade ODS alloys and their applications are reviewed, including an investigation of the stability of a commercial grade 20% Cr Fe-base ODS alloy(MA956). The alloy was evaluated in terms of the fracture toughness change along with the aging treatment. Also an attempt of the development of 9% Cr Fe-base ODS alloys is introduced

Finite element analysis of smart reinforced concrete beam with super elastic shape memory alloy subjected to static loading for seismic mitigation

Science.gov (United States)