Sample records for aircraft hangers

  1. 77 FR 72884 - Steel Wire Garment Hangers From Taiwan


    ... Register on August 20, 2012 (77 FR 50160) and on August 22, 2012 (77 FR 50713, corrected). The hearing was... COMMISSION Steel Wire Garment Hangers From Taiwan Determination On the basis of the record \\1\\ developed in... the United States is materially injured by reason of imports of steel wire garment hangers from...

  2. 78 FR 7452 - Steel Wire Garment Hangers From Vietnam; Determinations


    ... Register on August 20, 2012 (77 FR 50160) and on August 22, 2012 (77 FR 50713, corrected). The hearing was... COMMISSION Steel Wire Garment Hangers From Vietnam; Determinations On the basis of the record \\1\\ developed... imports of steel wire garment hangers from Vietnam, provided for in subheading 7326.20.00 of...

  3. Hanger-type laundry monitor system

    Laundry monitor is installed in nuclear power plants or other nuclear facilities in order to efficiently detect radioactive contamination remains on the surfaces of the working clothes which were used in the controlled area and washed afterward. The number of the working clothes which must be measured has been increasing in accordance with the increase of the nuclear facilities. This fact and recent intensified radiation control require automatic, high-speed and high sensitive measurement. Conveyer-type laundry monitor in which the working clothes are inserted by the metal net conveyer has been generally used, and recently new system with an automatic folder has become more popular. But, this type of system has not so big capacity because the clothes are conveyed longitudinally and also requires considerable wide space when installed. Fuji electric Co., Ltd. has been engaging in research and development for an optimum laundry monitor system used in nuclear facilities since the joint investigation with ten electric power companies in Japan in 1982. Consequently hanger-type laundry monitor system using automatic hanger conveyer was developed and 2 systems were delivered to Chubu Electric Power Co., Ltd. in 1986. This system permits to detect radioactive contamination on the working clothes, pick the contaminated clothes out and fold the uncontaminated clothes fully automatically and continuously. Moreover it allows to shorten the measurement time because the clothes are conveyed transversely and save the installation space, so that this will be regarded as considerably complete system in the world. This report describes the outline of the hanger-type laundry monitor system. (author)

  4. Failure analysis in locomotive Bogie Brake-Hanger



    Full Text Available Breakage of brake riggings in WAP7 locomotives has been a matter of concern since 2004, almost afterits commencement of manufacturing, which is having same bogie design as that in WAG9 locomotives. Both ofthese bogies are having TBU/PBU assembly for brakes, but breakage of brake hangers in WAG9 locomotivesare unheard off. Both the inner as well as outer hangers are breaking. However, the cases of breakage of innerhangers towards bogie frame are much more with 80% of the total failures. This paper deliberates to understandthe various failures in locomotive Bogie Brake-Hanger and on root cause analysis for the failure of Brakehanger. In this paper we analyze the characteristics of brake hanger using FEA software.The goal of the project is to develop a high-speed train system capable of reaching the maximum speedand to secure its key technologies, one of which is the braking technology.

  5. Moderator inlet line hanger replacement for Pickering nuclear power station

    Ontario Hydro's Pickering Nuclear Generating Station (PNGS), Units 1 and 2 were shutdown for large scale fuel channel replacement. Other nonroutine inspection and maintenance activities were performed to determine the overall condition of the units and it was seen that a moderator inlet line hanger (identified as HR-29) had failed in both units. Subsequent inspections during planned maintenance outages of Pickering NGS Units 3 and 4 revealed that hanger HR-29 had failed and required replacement. A research program was conducted to find a suitable technique. These problems included accessing tooling through small inspection ports, manipulating tooling from a significant distance and the high radiation fields within the vault. This paper describes the program undertaken to replace hanger HR-29. (author)

  6. Aircraft

    Hibbs, Bart D.; Lissaman, Peter B. S.; Morgan, Walter R.; Radkey, Robert L.


    This disclosure provides a solar rechargeable aircraft that is inexpensive to produce, is steerable, and can remain airborne almost indefinitely. The preferred aircraft is a span-loaded flying wing, having no fuselage or rudder. Travelling at relatively slow speeds, and having a two-hundred foot wingspan that mounts photovoltaic cells on most all of the wing's top surface, the aircraft uses only differential thrust of its eight propellers to turn. Each of five sections of the wing has one or more engines and photovoltaic arrays, and produces its own lift independent of the other sections, to avoid loading them. Five two-sided photovoltaic arrays, in all, are mounted on the wing, and receive photovoltaic energy both incident on top of the wing, and which is incident also from below, through a bottom, transparent surface. The aircraft is capable of a top speed of about ninety miles per hour, which enables the aircraft to attain and can continuously maintain altitudes of up to sixty-five thousand feet. Regenerative fuel cells in the wing store excess electricity for use at night, such that the aircraft can sustain its elevation indefinitely. A main spar of the wing doubles as a pressure vessel that houses hydrogen and oxygen gasses for use in the regenerative fuel cell. The aircraft has a wide variety of applications, which include weather monitoring and atmospheric testing, communications, surveillance, and other applications as well.

  7. Reengineering to reduce outage costs: Spring hanger pinning during outages

    One of the key steps in the reengineering process requires us to ask the question, open-quotes Is this step in our work process necessary?close quotes This paper describes one such redesign of a maintenance procedure, resulting in significant gains in cost reduction and schedule compression for plant outages. Before draining a water-filled piping system, maintenance procedures at many power plants require pinning of all spring hangers supporting the system. This requirement ensures that piping system components are not overloaded by the spring force that is no longer counteracted by the weight of water in the pipeline. Unfortunately, pinning spring hangers can be a time-consuming and costly endeavor. Because spring hangers quite often are located in congested areas that are inaccessible from floor level, scaffolding must be erected to allow physical access by maintenance personnel. At Clinton power station, the subject power plant for this paper, this activity was costing approximately $250 000 per refueling outage and a personnel radiation exposure of -5 person-rems. In the past, the only alternative to this costly requirement was to perform case-by-case analysis to evaluate the effects of the spring uplift forces on the drained piping and associated components. However, these analyses are costly (approximately $8000 per piping subsystem) and time consuming. Given these rather significant costs, it is highly advantageous to limit or eliminate the spring hanger pinning requirement. This paper presents an overview of an evaluation performed for Clinton power station to address this issue

  8. 24 CFR 3280.608 - Hangers and supports.


    ..., plastic drainage piping shall be supported at intervals not to exceed 4 feet and plastic water piping... provide protection against motion, vibration, road shock, or torque in the chassis. (3) Hangers and straps supporting plastic pipe shall not compress, distort, cut or abrade the piping and shall allow free...

  9. Attenuating resonant behavior of a tied arch railway bridge using increased hanger damping

    Andersson, Andreas; Karoumi, Raid


    In this paper, dynamic analyses and field measurements of a tied arch railway bridge is presented. Excessive vibrations of the hangers were obtained, caused by resonance during train passages. The resulting increase of the stress level and number of stress cycles were shown to decrease the fatigue service life significantly. The most critical section is a threaded turnbuckle connection of the hangers. Due to low damping of the hangers, more than 50 % of the cumulative fatigue damage was relat...

  10. 78 FR 8107 - Certain Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Countervailing Duty Order


    ... Countervailing Duty Determination and Final Affirmative Critical Circumstances Determination, 77 FR 75973... International Trade Administration Certain Steel Wire Garment Hangers From the Socialist Republic of Vietnam... order on certain steel wire garment hangers from the Socialist Republic of Vietnam (Vietnam)....

  11. 75 FR 42685 - Steel Wire Garment Hangers From the People's Republic of China: Initiation of Anti-Circumvention...


    ... Republic of China, 73 FR 58111 (October 6, 2008) (``Hangers Order''). DATES: Effective Date: July 22, 2010... hanger--occurs in the PRC with heavy and complex machinery. Citing to the factor of production..., tubes and struts to already formed hangers, without the need for equipment or machinery....

  12. 77 FR 73424 - Steel Wire Garment Hangers From Taiwan: Antidumping Duty Order


    ... Than Fair Value, 77 FR 62492 (October 15, 2012) (``Final Determination''). \\2\\ See Steel Wire Garment... Hangers from Taiwan: Preliminary Determination of Sales at Less than Fair Value, 77 FR 46055 (August 2... International Trade Administration Steel Wire Garment Hangers From Taiwan: Antidumping Duty Order AGENCY:...

  13. 78 FR 8105 - Steel Wire Garment Hangers From the Socialist Republic of Vietnam: Antidumping Duty Order


    ... Determination, 77 FR at 46054-55; and Steel Wire Garment Hangers From the Socialist Republic of Vietnam... Determination of Critical Circumstances, 77 FR 75980 (December 26, 2012) (``Vietnam Hangers Final Determination... Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 77 FR 46044 (August...

  14. 77 FR 9701 - Steel Wire Garment Hangers From Taiwan And Vietnam


    ... Commission, Washington, DC, and by publishing the notice in the Federal Register of January 6, 2012 (77 FR... COMMISSION Steel Wire Garment Hangers From Taiwan And Vietnam Determinations On the basis of the record \\1... injured by reason of imports from Taiwan and Vietnam of steel wire garment hangers, provided for...

  15. Paternal uniparental disomy 14: introducing the 'coat-hanger' sign

    Paternal uniparental disomy for chromosome 14 (patUPD14) is a rare condition, this being the eighth report. A male infant, born prematurely, was noted to have extremely lax skin and bilateral inguinal hernias. Skin biopsy confirmed the clinical diagnosis of congenital cutis laxa, but this did not explain the limb abnormalities. Radiographic findings (particularly the 'coat-hanger' configuration of the ribs on the chest radiograph), suggested a diagnosis of patUPD14, which was confirmed following DNA analysis. The patient died after prolonged respiratory failure. This combination of patUPD14 and congenital cutis laxa has not previously been described. Radiology can play a pivotal role in guiding the geneticist's choice of investigation. (orig.)

  16. Development and application of a packer-type drilling-free liner hanger

    Xin Tang


    Full Text Available In liner cementing, the upper cement plug and inner components of a common hanger needs to be drilled out after cementing, which will result in a poor cementing quality or even gas leakage at the flare opening. Therefore, a new packer-type drilling-free liner hanger has been developed, and a hydraulic setting-control packer, a flexible drilling-free seal box, and an auxiliary bearing back-off mechanism that go with the line hanger have been designed at the same time. Specific operation procedures include: (1 run in the liner string to the designed depth, then fully circulate the drilling fluid, finally drop the ball. When the tripping ball gets into the seat, the pressure will go up to cut off the hanging control pin and set the hanger; (2 continue to hold the pressure and cut off the ball seat pin to form circulation; (3 trip in the drill pipe to exert pressure on the hanger, back off to release the hanger from the running tool; (4 lower the drill pipe plug upon the completion of cement injection, cut off the releasing control pin of hollow casing plug, and run down further to bump with the bumping assembly; (5 remove the cementing head and connect the kelly driver, hold pressure again, then slowly pull up the drill tools, exert hydraulic pressure on the setting hydraulic cylinder of the packer assembly to cut off the setting control pin and set the packer; and (6 pull up the tools to the flare opening and wash out excessive cement slurry by circulating to realize free drilling of the whole hole. The successful application of the liner hanger in 127 mm diameter liner in Well BQ203-H1 indicates that the packer-type liner hanger has such advantages as easy hanging and back-off, accurate bumping, simple setting, and sound sealing performance.

  17. Case histories : implementation of new liner hanger technology in south central Venezuela significantly improves operations in complex wells

    Jimenez, C.; Soto, S.; Leon, A. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of); Marval, P.; Schoener-Scott, M. [Halliburton, Houston, TX (United States)


    Liner hangers are used in deep drilling operations to eliminate the need for full casing strings. However, conventional liner-hanger system do not always permit tool rotation, and liner-hanger failures can result in the complete loss of the wellbore. This study discussed an expandable liner hanger designed to withstand aggressive reaming as well as drilling to depths. Three case histories of wells located in southern Venezuela were used to compare the use of traditional and expandable liner hanger systems. The studies considered liner weight, and the pressure differentials caused by the use of positive seals. The study showed that conventional liner systems are not suited to the extreme environments of the Venezuelan heavy oil reserves. Multiple leak paths were observed. The expandable liner system provided a gas-tight seal, improved flow paths, and reduced the need for remedial cement jobs. It was concluded that use of the expandable systems also increased worker safety. 6 refs., 13 figs.

  18. A Preliminary Investigation of the Hanger Vibrations on the Great Belt East Bridge

    Gjelstrup, Henrik; Georgakis, Christos; Larsen, Allan


    investigation behind the causes of this relatively isolated hanger vibration event on the Great Belt East Bridge is undertaken. One of the main assumptions of the investigation is that coincidental icy conditions may have contributed in some way to large hanger response, by changing the cylindrical cross......On March 29, 2001, the Great Belt East Bridge exhibited large-amplitude hanger vibrations having elliptical orbits for wind speeds of between 16 - 17 m/s. Vibration amplitudes were in the order of 1.4m in the across-wind direction and 1.0m in the along-wind. In this paper, a preliminary...... the vibrations it is assumed that the aerodynamic moment coefficient is zero....

  19. 75 FR 68758 - Steel Wire Garment Hangers From the People's Republic of China: Preliminary Results and...


    ...: Creatine Monohydrate from the People's Republic of China, 64 FR 71104, 71104-05 (December 20, 1999) (where... Antidumping Duty Order: Steel Wire Garment Hangers from the People's Republic of China, 73 FR 58111 (October 6... to Request Administrative Review, 74 FR 50772 (October 1, 2009). On October 30, 2009, certain...

  20. Airports and Airfields, Airport hangers areas for storage of airplanes and tiedown areas., Published in unknown, Johnson County AIMS.

    NSGIC GIS Inventory (aka Ramona) — This Airports and Airfields dataset, was produced all or in part from Orthoimagery information as of unknown. It is described as 'Airport hangers areas for storage...

  1. Research and design of hanger and support series of nuclear safety class process piping

    Hangers and supports of nuclear safety class piping are an important part of primary system piping in a nuclear power plant. They will directly affect the reliability of operation, the period at construction and the investment for a nuclear power plant. It is an absolutely necessary job for Pakistan Chashma Nuclear Power Plant Project to research and design a series of piping supports in accordance with ASME-III NF. It is also an important designing for developing nuclear power plant later in China. After working over two years, a series of piping supports of nuclear safety class which have 57 types and more than 2460 specifications have been designed. This series is perfect, and can satisfy the requirements of piping final designing for nuclear power plant. This series of hangers and supports is mainly used in the process piping of nuclear safety class 1,2,3. They can also be used in other piping of nuclear safety class and piping with aseismic requirement of non-nuclear safety class

  2. The finishing problem of stress on pipe with cold spring and hanger spring

    The Fluid temperature influence stream in piping from pump nozzle to tank nozzle will cause expansion or contraction. This condition will pull or press to the nozzle. The consequences of piping displacement, so will rise return force to piping. Because of that must calculated the displacement using Caesar 11.4.program so that force of rising can support by piping without fracture and break. From calculation, resulted displacement Dy = -30,224 mm, Restraint summary Fy = 75,851 kg and Stress = 5.026,9 kg/cm2 and then It done to cut of Dy with Cold Spring method, and so Running on Caesar 11.4 program, resulted that It not different with the first data namely that is Dy = -30,038 mm, Restraint Summary Fy = 75.562 kg dan stress = 5.006,7 kg/cm2. Because of data still stress on Piping Installation indicated by value of Restraint summary and stress were height. And then It has taken solution by consideration that pipe of ∅30 very rigid, namely to lose The support and change with the spring hanger, so program of Caesar II.4 has run and result of support displacement is 45,588 mm, Restraint summary Fy = -1.823 kg dan Stress 2.1178 kg/cm2 with allowable stress 2.121,1 kg/cm2. It see result of calculate with spring hanger, in fact The stress more little than allowable stress, so that this condition is safety to install. (author)

  3. Feasibility Study on Tension Estimation Technique for Hanger Cables Using the FE Model-Based System Identification Method

    Kyu-Sik Park


    Full Text Available Hanger cables in suspension bridges are partly constrained by horizontal clamps. So, existing tension estimation methods based on a single cable model are prone to higher errors as the cable gets shorter, making it more sensitive to flexural rigidity. Therefore, inverse analysis and system identification methods based on finite element models are suggested recently. In this paper, the applicability of system identification methods is investigated using the hanger cables of Gwang-An bridge. The test results show that the inverse analysis and systemic identification methods based on finite element models are more reliable than the existing string theory and linear regression method for calculating the tension in terms of natural frequency errors. However, the estimation error of tension can be varied according to the accuracy of finite element model in model based methods. In particular, the boundary conditions affect the results more profoundly when the cable gets shorter. Therefore, it is important to identify the boundary conditions through experiment if it is possible. The FE model-based tension estimation method using system identification method can take various boundary conditions into account. Also, since it is not sensitive to the number of natural frequency inputs, the availability of this system is high.

  4. A Comparison between the Knight of the Dark Ages and the Hanger-on of an Aristocrat of the Warring States Era



    At the beginning of seven century B.C, as the conflicts between vassals were getting fierce, a bodyguard with force and courage was needed by the monarch of feudal China. Then stabber -the first type of the hanger-on of an aristocrat appeared.

  5. Amphibious Aircraft

    National Aeronautics and Space Administration — A brief self composed research article on Amphibious Aircrafts discussing their use, origin and modern day applications along with their advantages and...

  6. Aircraft Design

    Bowers, Albion H. (Inventor); Uden, Edward (Inventor)


    The present invention is an aircraft wing design that creates a bell shaped span load, which results in a negative induced drag (induced thrust) on the outer portion of the wing; such a design obviates the need for rudder control of an aircraft.

  7. Aircraft Noise

    Michel, Ulf; Dobrzynski, Werner; Splettstoesser, Wolf; Delfs, Jan; Isermann, Ullrich; Obermeier, Frank

    Aircraft industry is exposed to increasing public pressure aiming at a continuing reduction of aircraft noise levels. This is necessary to both compensate for the detrimental effect on noise of the expected increase in air traffic and improve the quality of living in residential areas around airports.

  8. 小井眼筛管悬挂器的研制与应用%Development and application of sieve tube hanger in slim hole

    赵峨松; 陈娟琪


    为增大防砂结构内通径尺寸,实现(O)101.6mm套管出砂小井眼油气井机械防砂,研制了小井眼专用筛管悬挂器,采用坐封、丢手动力装置与悬挂装置分开的独立设计,使悬挂器丢手后内通径为56mm,突破了传统卡瓦式封隔器最大通径36mm的设计极限.试验表明,该悬挂器使用方便,地面投球打压即可完成坐封、丢手,能实现悬挂器内冲砂,可配合筛管实现小井眼机械防砂工艺和小井眼复合防砂工艺,为解决小井眼出砂治理难题提供了一种新思路,具有广阔的应用前景.%In order to increase the inner diameter of the sand control device and realize mechanical sand control in oil & gas wells with the casing of 0101.6 mm, a special sieve tube hanger used in slim hole is developed. By separately designing block letter, lost hand power device and hanger implement, the inner diameter of hanger after lost hand is up to 56 mm which is a breakthrough in designing traditional slip packer with limit diameter of 036 mm. Ground test and field application show that the hanger is easy using, and can immediately finish set sealing and lost hand by putting steel ball and increasing the pressure on the ground. By constructing the hanger washed sand measure in the hanger, mechanical sand control technology and slim hole compound sand control process can be realized in slim hole companying with screen. The success provides a new measure to solve sand problem in slim hole and has broad application prospects in the future.

  9. Aircraft Carriers

    Nødskov, Kim; Kværnø, Ole

    the majority of its foreign trade, as well as its oil imports, upon which the country is totally dependent. China therefore has good reasons for acquiring an aircraft carrier to enable it to protect its national interests. An aircraft carrier would also be a prominent symbol of China’s future status...... information is pieced together, then a picture is created of a Chinese aircraft carrier program, where Varyag will be made operational for training purposes. With this as the model, China will build a similar sized carrier themselves. If this project does become a reality, then it will take many years for...... Kuznetsov carrier. The SU-33 is, in its modernized version, technologically at the same level as western combat aircraft in both the offensive as well as the defensive roles. But Russia and China currently have an arms trade 6 dispute that is likely to prevent a deal, unless the dispute is resolved. As an...

  10. A Comparison between the Knight of the Dark Ages and the Hanger- on of an Aristocrat of the Warring States Era



    @@ At the beginning of seven century B. C, as the conflicts between vassals were getting fierce, a bodyguard with force and courage was needed by the monarch of feudal China. Then stabber - the first type of the hanger - on of an aristocrat appeared. They served and protected their master. At the state of war they could lead soldiers to fight.At zero hour, they even threw themselves into the breach to save their master.

  11. Aircraft cybernetics


    The use of computers for aircraft control, flight simulation, and inertial navigation is explored. The man-machine relation problem in aviation is addressed. Simple and self-adapting autopilots are described and the assets and liabilities of digital navigation techniques are assessed.


    Ostroumov, Ivan; Kuz’menko, Natalia


    Abstract. In the article the important problems of software development for aircraft tracking have beendiscussed. Position reports of ACARS have been used for aircraft tracking around the world.An algorithm of aircraft coordinates decoding and visualization of aircraft position on the map has beenrepresented.Keywords: ACARS, aircraft, internet, position, software, tracking.

  13. Propulsion controlled aircraft computer

    Cogan, Bruce R. (Inventor)


    A low-cost, easily retrofit Propulsion Controlled Aircraft (PCA) system for use on a wide range of commercial and military aircraft consists of an propulsion controlled aircraft computer that reads in aircraft data including aircraft state, pilot commands and other related data, calculates aircraft throttle position for a given maneuver commanded by the pilot, and then displays both current and calculated throttle position on a cockpit display to show the pilot where to move throttles to achieve the commanded maneuver, or is automatically sent digitally to command the engines directly.

  14. Based on Bow-Tie Model of the Hanger Failure Analysis of Light-liner Cementing%基于Bow-Tie模型的轻尾管固井中悬挂器失效分析

    孙泽秋; 金磊; 马锦明; 李强


    Light-liner Cementing is a dynamic systems with clearly technological process and com-plex construction.For failure research of light-liner hanger cementing process,the hanger failure of Bow-Tie model is constructed,which combine FTA with ETA analysis method.By using fault-tree analytic method,the failure reasons of hanger are induced in this paper,the failure cause of the accident after the whole process is studied,through event-tree analysis,which can understand light liner hanger cementing failure intuitively in the whole development process.Combined with certain oilfield accident analysis of Y well,Bow-Tie model is viable for the hanger failure issue based on the analysis of light-liner cementing.Studies show that Bow-Tie model is of great signifi-cance to prevent the hanger failure,and has a guiding significance for light-liner on-site cementing operation.%轻尾管固井是一个工艺流程清晰、施工较复杂的动态系统。针对轻尾管固井中的悬挂器失效问题,采用事故树和事件树相结合的分析方法,构建了悬挂器失效的Bow-Tie 模型。利用事故树分析法得到了诱发悬挂器失效的原因,通过事件树分析法研究了悬挂器失效后引起事故的全过程,直观地了解轻尾管固井中悬挂器失效的整个发展过程。结合某油田 Y 井的事故分析,验证了Bow-Tie模型在分析轻尾管固井中悬挂器失效方面是可行的。研究得出的悬挂器失效Bow-Tie模型对于防止悬挂器失效的发生具有重要意义,对于轻尾管固井的现场施工具有指导作用。

  15. Database on aircraft accidents

    The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to the report, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. This year, the database was revised by adding aircraft accidents in 2010 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2011 database for latest 20 years from 1991 to 2010. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for latest 20 years from 1991 to 2010 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2011 revised database for latest 20 years from 1991 to 2010 shows the followings. The trend of the 2011 database changes little as compared to the last year's one. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. 4 large fixed-wing aircraft accidents, 58 small fixed-wing aircraft accidents, 5 large bladed aircraft accidents and 114 small bladed aircraft accidents occurred. The relevant accidents for evaluating

  16. Designing A Conventional Aircraft

    Sonei, Arash


    This paper is explaining the important design phases of dimensioning an unmanned conventional aircraft from scratch and will also design one according to a few chosen requirements. The design phases discussed will be all from wing dimensioning to stability and spin recovery, aircraft performance requirements and how to select a motor which overcomes these. As well as the optimal rate of climb for improved efficiency is discussed. In the end an aircraft which manages the set requirements and i...

  17. Lightning effects on aircraft


    Direct and indirect effects of lightning on aircraft were examined in relation to aircraft design. Specific trends in design leading to more frequent lightning strikes were individually investigated. These trends included the increasing use of miniaturized, solid state components in aircraft electronics and electric power systems. A second trend studied was the increasing use of reinforced plastics and other nonconducting materials in place of aluminum skins, a practice that reduces the electromagnetic shielding furnished by a conductive skin.

  18. 钢管混凝土拱桥吊杆张拉方案比选%Comparison and Selection of Tensioning Scheme for Hangers of Concrete-Filled Steel Tube Arch Bridge



    The main bridge of the Shahe River Bridge on Xingtai‐Fenyang Expressway is a con‐crete‐filled steel tube through arch bridge with a main span of 146 m .The hangers of the bridge were to be constructed by the unstressed state method .To determine the tensioning sequences and to ensure the safety of the tensioning process of the hangers in the construction ,4 types of the hanger tensioning schemes were proposed ,i .e .① the hangers were to be symmetrically tensioned from the arch springs at both ends of the bridge towards the arch crown ;② the hangers to be sym‐metrically tensioned from the arch crown towards the arch springs ;③ the hangers to be symmetri‐cally tensioned from the 1/4 or 3/4 arch ribs towards the arch springs and midspan and ④ the hangers to be tensioned in 3 batches .The software MIDAS Civil was used to set up the finite ele‐ment model for the whole bridge of the bridge ,the simulation calculation was conducted and the tensile forces of the hangers ,displacement of the arch ribs ,core concrete stress of the arch ribs and horizontal thrust of the arch springs of the completed bridge of the 4 tensioning schemes were analyzed .The results of the analysis show that for the scheme 4 ,the tensile forces of the hangers of the completed bridge are closest to the designed tensile forces ,the geometric shapes of the arch ribs are good ,the changing of the concrete compressive stress in the arch rib cross section is uni‐form .No great compressive stress occurs and the influence of the stress on the horizontal thrust of the arch springs is little .In the actual construction ,the scheme 4 is therefore selected .In the scheme ,the hangers of the bridge need not to be adjusted for the second time ,the construction progress of the bridge can be accelerated and the construction cost is also saved .%邢汾高速公路沙河特大桥主桥为主跨146 m的下承式钢管混凝土拱桥,吊杆采用无应力状态法施工。为确定该桥吊

  19. 服装吊挂系统上位机软件设计与实现%Design and implement of host computer software for garment hanger system

    吴鑫; 俞建定; 赵鹏飞; 骆国庆


    This paper introduces a kind of garment hanger system based on Ethernet and RS485 bus , and elaborates the de-sign and implement of host computer software of the system . The host computer software is a control center which controls the pro-duction process by communicating with every station and generates payroll report , production report and production analysis diagram in a realtime way . The management terminal using C# language , communication module is independent of the management terminal which using the Delphi platform , database using sql2000 . The actual application shows that the software runs stable , the user inter-face is friendly .%介绍了一种基于以太网和 RS485总线的服装吊挂系统设计,阐述了该系统的上位机软件的设计与实现。上位机软件是系统的控制中心,监控管理每个工作站的生产状况,实时生成薪资报表、产量报表、生产分析图。软件界面采用 C#编程语言,通信模块的程序采用 Delphi 技术实现,后台数据库采用 SQL2000。该系统已经投入企业使用,系统各项功能运行稳定,界面友好,满足用户需求。


    RAHMATI, Sadegh; GHASED, Amir


    Abstract. Generally domain Aircraft uses conventional fuel. These fuel having limited life, high cost and pollutant. Also nowadays price of petrol and other fuels are going to be higher, because of scarcity of those fuels. So there is great demand of use of non-exhaustible unlimited source of energy like solar energy. Solar aircraft is one of the ways to utilize solar energy. Solar aircraft uses solar panel to collect the solar radiation for immediate use but it also store the remaining part ...

  1. Aircraft electromagnetic compatibility

    Clarke, Clifton A.; Larsen, William E.


    Illustrated are aircraft architecture, electromagnetic interference environments, electromagnetic compatibility protection techniques, program specifications, tasks, and verification and validation procedures. The environment of 400 Hz power, electrical transients, and radio frequency fields are portrayed and related to thresholds of avionics electronics. Five layers of protection for avionics are defined. Recognition is given to some present day electromagnetic compatibility weaknesses and issues which serve to reemphasize the importance of EMC verification of equipment and parts, and their ultimate EMC validation on the aircraft. Proven standards of grounding, bonding, shielding, wiring, and packaging are laid out to help provide a foundation for a comprehensive approach to successful future aircraft design and an understanding of cost effective EMC in an aircraft setting.

  2. Depreciation of aircraft

    Warner, Edward P


    There is a widespread, and quite erroneous, impression to the effect that aircraft are essentially fragile and deteriorate with great rapidity when in service, so that the depreciation charges to be allowed on commercial or private operation are necessarily high.

  3. Aircraft Fire Protection Laboratory

    Federal Laboratory Consortium — The Navy Aircraft Protection Laboratory provides complete test support for all Navy air vehicle fire protection systems. The facility allows for the simulation of a...

  4. Solar thermal aircraft

    Bennett, Charles L. (Livermore, CA)


    A solar thermal powered aircraft powered by heat energy from the sun. A heat engine, such as a Stirling engine, is carried by the aircraft body for producing power for a propulsion mechanism, such as a propeller. The heat engine has a thermal battery in thermal contact with it so that heat is supplied from the thermal battery. A solar concentrator, such as reflective parabolic trough, is movably connected to an optically transparent section of the aircraft body for receiving and concentrating solar energy from within the aircraft. Concentrated solar energy is collected by a heat collection and transport conduit, and heat transported to the thermal battery. A solar tracker includes a heliostat for determining optimal alignment with the sun, and a drive motor actuating the solar concentrator into optimal alignment with the sun based on a determination by the heliostat.

  5. Aircraft Data Acquisition

    Elena BALMUS


    Full Text Available The introduction of digital systems instead of analog ones has created a major separation in the aviation technology. Although the digital equipment made possible that the increasingly faster controllers take over, we should say that the real world remains essentially analogue [4]. Fly-by-wire designers attempting to control and measure the real feedback of an aircraft were forced to find a way to connect the analogue environment to their digital equipment. In order to manage the implications of this division in aviation, data optimization and comparison has been quite an important task. The interest in using data acquisition boards is being driven by the technology and design standards in the new generation of aircraft and the ongoing efforts of reducing weight and, in some cases addressing the safety risks. This paper presents a sum of technical report data from post processing and diversification of data acquisition from Arinc 429 interface on a research aircraft platform. Arinc 429 is by far the most common data bus in use on civil transport aircraft, regional jets and executive business jets today. Since its introduction on the Boeing 757/767 and Airbus aircraft in the early 1980s hardly any aircraft has been produced without the use of this data bus. It was used widely by the air transport indu

  6. Analysis of the Application of New Combined Hanger in Installation Engineering%安装工程中新型组合式支吊架的应用分析



    随着建筑行业的快速发展,建筑市场逐渐标准化、规范化,市场、政府更加倡导标准化施工,提倡建筑的安全环保、节能降耗。因此,新型组合式支吊架在工程中的应用得到了推广。本文主要对新型组合式支吊架进行了介绍,分析了其在安装工程中的应用。%With the rapid development of the construction in-dustry, the construction market has gradual y been standard-ized. Both the market and the government advocate the standa-rdization of construction, the construction safety and enviro-nmental protection, energy saving. Therefore, the application of the new combined hanger has been promoted in engineering. This paper mainly introduced the new combined hanger and analyzed its application in the instal ation.


    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in the ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2004, Section 6.4.1). That determination was conservatively based on limited knowledge of flight data in the area of concern and on crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a Monitored Geologic Repository (MGR) at Yucca Mountain using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987, Section, as guidance for the inclusion or exclusion of identified aircraft hazards. NUREG-0800 is being used here as a reference because some of the same considerations apply. The intended use of this report is to provide inputs for further screening and analysis of the identified aircraft hazards based on the criteria that apply to Category 1 and 2 event sequence analyses as defined in 10 CFR 63.2 (see Section 4). The scope of this technical report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the MGR at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (see Section 7)


    K.L. Ashley


    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in the ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2004, Section 6.4.1). That determination was conservatively based on limited knowledge of flight data in the area of concern and on crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a Monitored Geologic Repository (MGR) at Yucca Mountain using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987, Section, as guidance for the inclusion or exclusion of identified aircraft hazards. NUREG-0800 is being used here as a reference because some of the same considerations apply. The intended use of this report is to provide inputs for further screening and analysis of the identified aircraft hazards based on the criteria that apply to Category 1 and 2 event sequence analyses as defined in 10 CFR 63.2 (see Section 4). The scope of this technical report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the MGR at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (see Section 7).

  9. Identification of Aircraft Hazards

    K. Ashley


    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2005 [DIRS 174235], Section 6.4.1). That determination was conservatively based upon limited knowledge of flight data in the area of concern and upon crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a monitored geologic repository (MGR) at Yucca Mountain, using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987 [DIRS 103124], Section, as guidance for the inclusion or exclusion of identified aircraft hazards. The intended use of this report is to provide inputs for further screening and analysis of identified aircraft hazards based upon the criteria that apply to Category 1 and Category 2 event sequence analyses as defined in 10 CFR 63.2 [DIRS 176544] (Section 4). The scope of this report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the repository at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (Section 7).

  10. Aircraft Operations Classification System

    Harlow, Charles; Zhu, Weihong


    Accurate data is important in the aviation planning process. In this project we consider systems for measuring aircraft activity at airports. This would include determining the type of aircraft such as jet, helicopter, single engine, and multiengine propeller. Some of the issues involved in deploying technologies for monitoring aircraft operations are cost, reliability, and accuracy. In addition, the system must be field portable and acceptable at airports. A comparison of technologies was conducted and it was decided that an aircraft monitoring system should be based upon acoustic technology. A multimedia relational database was established for the study. The information contained in the database consists of airport information, runway information, acoustic records, photographic records, a description of the event (takeoff, landing), aircraft type, and environmental information. We extracted features from the time signal and the frequency content of the signal. A multi-layer feed-forward neural network was chosen as the classifier. Training and testing results were obtained. We were able to obtain classification results of over 90 percent for training and testing for takeoff events.

  11. Identification of Aircraft Hazards

    Aircraft hazards were determined to be potentially applicable to a repository at Yucca Mountain in ''Monitored Geological Repository External Events Hazards Screening Analysis'' (BSC 2005 [DIRS 174235], Section 6.4.1). That determination was conservatively based upon limited knowledge of flight data in the area of concern and upon crash data for aircraft of the type flying near Yucca Mountain. The purpose of this report is to identify specific aircraft hazards that may be applicable to a monitored geologic repository (MGR) at Yucca Mountain, using NUREG-0800, ''Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants'' (NRC 1987 [DIRS 103124], Section, as guidance for the inclusion or exclusion of identified aircraft hazards. The intended use of this report is to provide inputs for further screening and analysis of identified aircraft hazards based upon the criteria that apply to Category 1 and Category 2 event sequence analyses as defined in 10 CFR 63.2 [DIRS 176544] (Section 4). The scope of this report includes the evaluation of military, private, and commercial use of airspace in the 100-mile regional setting of the repository at Yucca Mountain with the potential for reducing the regional setting to a more manageable size after consideration of applicable screening criteria (Section 7)

  12. Hazards from aircraft

    The siting of nuclear power plants has created innumerable environmental concerns. Among the effects of the ''man-made environment'' one of increasing importance in recent nuclear plant siting hazards analysis has been the concern about aircraft hazards to the nuclear plant. These hazards are of concern because of the possibility that an aircraft may have a malfunction and crash either near the plant or directly into it. Such a crash could be postulated to result, because of missile and/or fire effects, in radioactive releases which would endanger the public health and safety. The majority of studies related to hazards from air traffic have been concerned with the determination of the probability associated with an aircraft striking vulnerable portions of a given plant. Other studies have focused on the structural response to such a strike. This work focuses on the problem of strike probability. 13 references

  13. Advanced Aircraft Material

    Vivek Kumar Prince


    Full Text Available There has been long debate on “advanced aircraft material” from past decades & researchers too came out with lots of new advanced material like composites and different aluminum alloys. Now days a new advancement that is in great talk is third generation Aluminum-lithium alloy. Newest Aluminum-lithium alloys are found out to have low density, higher elastic modulus, greater stiffness, greater cryogenic toughness, high resistance to fatigue cracking and improved corrosion resistance properties over the earlier used aircraft material as mentioned in Table 3 [1-5]. Comparison had been made with nowadays used composite material and is found out to be more superior then that

  14. Optical communications for transport aircraft

    Stengel, Robert


    Optical communications for transport aircraft are discussed. The problem involves: increasing demand for radio-frequency bands from an enlarging pool of users (aircraft, ground and sea vehicles, fleet operators, traffic control centers, and commercial radio and television); desirability of providing high-bandwidth dedicated communications to and from every aircraft in the National Airspace System; need to support communications, navigation, and surveillance for a growing number of aircraft; and improved meteorological observations by use of probe aircraft. The solution involves: optical signal transmission support very high data rates; optical transmission of signals between aircraft, orbiting satellites, and ground stations, where unobstructed line-of-sight is available; conventional radio transmissions of signals between aircraft and ground stations, where optical line-of-sight is unavailable; and radio priority given to aircraft in weather.

  15. Long Range Aircraft Trajectory Prediction

    Magister, Tone


    The subject of the paper is the improvement of the aircraft future trajectory prediction accuracy for long-range airborne separation assurance. The strategic planning of safe aircraft flights and effective conflict avoidance tactics demand timely and accurate conflict detection based upon future four–dimensional airborne traffic situation prediction which is as accurate as each aircraft flight trajectory prediction. The improved kinematics model of aircraft relative flight considering flight ...

  16. Auralization of novel aircraft configurations

    Arntzen, M.; Bertsch, E.L.; Simons, D.G.


    A joint initiative of NLR, DLR, and TU Delft has been initiated to streamline the process of generating audible impressions of novel aircraft configurations. The integrated approach adds to the value of the individual tools and allows predicting the sound of future aircraft before they actually fly. Hence, an existing process for the aircraft design and system noise prediction at DLR has been upgraded to generate the required input data for an aircraft auralization framework developed by NLR ...

  17. 系杆拱桥吊杆节点足尺模型承载性能试验研究%Full-Scale Model Test Study of Load-Carrying Behavior of Hanger Joint of Tied Arch Bridge

    桂水荣; 陈水生; 万水


    To study if the strength of the anchor head in anchorage zone of the hanger joint of tied arch bridge could meet the load-carrying requirements, the Shengmi Bridge in Nanchang was cited as an example, the full-scale model for the anchorage zone of the hanger joint at arch crown of the bridge was fabricated and the load-carrying capacity of the joint under the action of the de signed load was tested. The spatial finite element model of the anchorage zone was established and the theoretic values of the finite element and the measurement values of the test were comparatively analyzed. The results of the analysis show that the global strength of the double-layer steel socket of the hanger joint can meet the requirements, however, the local compressive strength values of the contact between the stiffening plates and the steel padding plate exceed the allowable values and the stiffening plates should be reinforced. The fabrication accuracy of the model has influence on the proportions of the load shared by the inner layer and outer layer of the steel socket and in the future tests of the similar kind, attention should be paid.%为研究系杆拱桥吊杆节点锚固区锚头强度是否满足受力要求,以南昌生米大桥为研究背景,制作拱顶吊杆节点锚固区的足尺模型,测试在设计荷载作用下吊杆节点承载力,并建立空间有限元模型,对比分析有限元理论值与试验实测值.研究结果表明:双层钢套筒整体强度满足要求,但加劲板与钢垫板接触位置局部抗压强度超过允许值,应对加劲板予以补强.模型试件的制作精度影响内钢管与外钢套筒分担荷载比例,在今后的类似试验过程中应予以重视.

  18. Aircraft noise prediction

    Filippone, Antonio


    This contribution addresses the state-of-the-art in the field of aircraft noise prediction, simulation and minimisation. The point of view taken in this context is that of comprehensive models that couple the various aircraft systems with the acoustic sources, the propagation and the flight trajectories. After an exhaustive review of the present predictive technologies in the relevant fields (airframe, propulsion, propagation, aircraft operations, trajectory optimisation), the paper addresses items for further research and development. Examples are shown for several airplanes, including the Airbus A319-100 (CFM engines), the Bombardier Dash8-Q400 (PW150 engines, Dowty R408 propellers) and the Boeing B737-800 (CFM engines). Predictions are done with the flight mechanics code FLIGHT. The transfer function between flight mechanics and the noise prediction is discussed in some details, along with the numerical procedures for validation and verification. Some code-to-code comparisons are shown. It is contended that the field of aircraft noise prediction has not yet reached a sufficient level of maturity. In particular, some parametric effects cannot be investigated, issues of accuracy are not currently addressed, and validation standards are still lacking.

  19. The rotating tubing hanger system

    Beam pump systems are among the most cost efficient artificial lift systems in the industry, assuming a long run time between pulling jobs to repair tubing failures caused by rod wear. The tubing string represents the second largest investment in the well. The longer the period of time the well can be kept on-line and producing between pulling jobs, the more efficient and cost effective is the beam pump system. This paper describes in detail the conception, development and implementation of a new system that extends tubing life on rod pumped wells. The system uses a very simple concept; rotate the tubing string to extend the length of time between tubing failures and the resultant pulling jobs. The system is powered directly from the walking beam and requires no additional power source; nor does the system use any additional energy

  20. Guidance Systems of Fighter Aircraft

    K.N. Rajanikanth


    Full Text Available Mission performance of a fighter aircraft is crucial for survival and strike capabilities in todays' aerial warfare scenario. The guidance functions of such an aircraft play a vital role inmeeting the requirements and accomplishing the mission success. This paper presents the requirements of precision guidance for various missions of a fighter aircraft. The concept ofguidance system as a pilot-in-loop system is pivotal in understanding and designing such a system. Methodologies of designing such a system are described.

  1. 19 CFR 122.64 - Other aircraft.


    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Other aircraft. 122.64 Section 122.64 Customs... AIR COMMERCE REGULATIONS Clearance of Aircraft and Permission To Depart § 122.64 Other aircraft. Clearance or permission to depart shall be requested by the aircraft commander or agent for aircraft...

  2. Chemistry in aircraft plumes

    Kraabol, A.G.; Stordal, F.; Knudsen, S. [Norwegian Inst. for Air Research, Kjeller (Norway); Konopka, P. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany). Inst. fuer Physik der Atmosphaere


    An expanding plume model with chemistry has been used to study the chemical conversion of NO{sub x} to reservoir species in aircraft plumes. The heterogeneous conversion of N{sub 2}O{sub 5} to HNO{sub 3}(s) has been investigated when the emissions take place during night-time. The plume from an B747 has been simulated. During a ten-hour calculation the most important reservoir species was HNO{sub 3} for emissions at noon. The heterogeneous reactions had little impact on the chemical loss of NO{sub x} to reservoir species for emissions at night. (author) 4 refs.

  3. Structural integrity in aircraft.

    Hardrath, H. F.


    The paper reviews briefly the current design philosophies for achieving long, efficient, and reliable service in aircraft structures. The strengths and weaknesses of these design philosophies and their demonstrated records of success are discussed. The state of the art has not been developed to the point where designing can be done without major test inspection and maintenance programs. A broad program of research is proposed through which a viable computerized design scheme will be provided during the next decade. The program will organize and correlate existing knowledge on fatigue and fracture behavior, identify gaps in this knowledge, and guide specific research to upgrade design capabilities.

  4. Aircraft Inspection for the General Aviation Aircraft Owner.

    Federal Aviation Administration (DOT), Washington, DC. Flight Standards Service.

    Presented is useful information for owners, pilots, student mechanics, and others with aviation interests. Part I of this booklet outlines aircraft inspection requirements, owner responsibilities, inspection time intervals, and sources of basic information. Part II is concerned with the general techniques used to inspect an aircraft. (Author/JN)

  5. Altus aircraft on runway


    The remotely piloted Altus aircraft flew several developmental test flights from Rogers Dry Lake adjacent to NASA's Dryden Flight Research Center, Edwards, Calif., in 1996. The Altus--the word is Latin for 'high'--is a variant of the Predator surveillance drone built by General Atomics/Aeronautical Systems, Inc. It is designed for high-altitude, long-duration scientific sampling missions, and is powered by a turbocharged four-cylinder piston engine. The first Altus was developed under NASA's Environmental Research Aircraft and Sensor Technology program, while a second Altus was built for a Naval Postgraduate School/Department of Energy program. A pilot in a control station on the ground flew the craft by radio signals, using visual cues from a video camera in the nose of the Altus and information from the craft's air data system. Equipped with a single-stage turbocharger during the 1996 test flights, the first Altus reached altitudes in the 37,000-foot range, while the similarly-equipped second Altus reached 43,500 feet during developmental flights at Dryden in the summer of 1997. The NASA Altus also set an endurance record of more than 26 hours while flying a science mission in late 1996 and still had an estimated 10 hours of fuel remaining when it landed. Now equipped with a two-stage turbocharger, the NASA Altus maintained an altitude of 55,000 feet for four hours during flight tests in 1999.

  6. Radial cylinder aircraft engines

    Šimíček, Petr


    Práce je zaměřena na konstrukční řešení letadlových hvězdicových motorů. Úvod je pojednáním o historii letadlových hvězdicových motorů a jejich vývoji v historickém kontextu. Druhá část je zaměřena na konstrukci letadlových hvězdicových motorů, následně jsou uvedena některá zajímavá konstrukční řešení a porovnání s motorem jiného druhu konstrukce. The bachelor's thesis is focused on design of aircraft radial engines. Home is a treatise on the history of aircraft radial engines and their de...

  7. Aviation industry-research in aircraft finance

    Ehrenthal, Joachim C.F.


    Aircraft values are key to aircraft financing decisions: Aircraft values act as a source of security for providers of debt capital and lessors failing to re-place aircraft, and as a source of upside potential to equity investors. Yet, aircraft values cannot be precisely and continuously monitored. This is because neither actual primary nor secondary aircraft transaction prices are disclosed. Various types of third party valuation estimates exist, but relying solely on third party appraisa...


    C.M. Meyer


    Full Text Available Many sources maintain that the role played by air power in the 1973 Yom Kippur War was important. Other interpretations state that control of air space over the battlefield areas, (either by aircraft or anti-aircraft defences, was vital.

  9. Commercial aircraft composite technology

    Breuer, Ulf Paul


    This book is based on lectures held at the faculty of mechanical engineering at the Technical University of Kaiserslautern. The focus is on the central theme of societies overall aircraft requirements to specific material requirements and highlights the most important advantages and challenges of carbon fiber reinforced plastics (CFRP) compared to conventional materials. As it is fundamental to decide on the right material at the right place early on the main activities and milestones of the development and certification process and the systematic of defining clear requirements are discussed. The process of material qualification - verifying material requirements is explained in detail. All state-of-the-art composite manufacturing technologies are described, including changes and complemented by examples, and their improvement potential for future applications is discussed. Tangible case studies of high lift and wing structures emphasize the specific advantages and challenges of composite technology. Finally,...

  10. Aircraft recognition and pose estimation

    Hmam, Hatem; Kim, Jijoong


    This work presents a geometry based vision system for aircraft recognition and pose estimation using single images. Pose estimation improves the tracking performance of guided weapons with imaging seekers, and is useful in estimating target manoeuvres and aim-point selection required in the terminal phase of missile engagements. After edge detection and straight-line extraction, a hierarchy of geometric reasoning algorithms is applied to form line clusters (or groupings) for image interpretation. Assuming a scaled orthographic projection and coplanar wings, lateral symmetry inherent in the airframe provides additional constraints to further reject spurious line clusters. Clusters that accidentally pass all previous tests are checked against the original image and are discarded. Valid line clusters are then used to deduce aircraft viewing angles. By observing that the leading edges of wings of a number of aircraft of interest are within 45 to 65 degrees from the symmetry axis, a bounded range of aircraft viewing angles can be found. This generic property offers the advantage of not requiring the storage of complete aircraft models viewed from all aspects, and can handle aircraft with flexible wings (e.g. F111). Several aircraft images associated with various spectral bands (i.e. visible and infra-red) are finally used to evaluate the system's performance.

  11. 36 CFR 331.14 - Aircraft.


    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Aircraft. 331.14 Section 331..., KENTUCKY AND INDIANA § 331.14 Aircraft. (a) The operation of aircraft on WCA lands and waters is prohibited... prohibited. (c) The provisions of this section shall not be applicable to aircraft engaged on...

  12. 48 CFR 246.408-71 - Aircraft.


    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Aircraft. 246.408-71... Aircraft. (a) The Federal Aviation Administration (FAA) has certain responsibilities and prerogatives in connection with some commercial aircraft and of aircraft equipment and accessories (Pub. L. 85-726 (72...

  13. 36 CFR 327.4 - Aircraft.


    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Aircraft. 327.4 Section 327.4... Aircraft. (a) This section pertains to all aircraft including, but not limited to, airplanes, seaplanes, helicopters, ultra-light aircraft, motorized hang gliders, hot air balloons, any non-powered flight devices...

  14. 14 CFR 141.39 - Aircraft.


    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Aircraft. 141.39 Section 141.39 Aeronautics... CERTIFICATED AGENCIES PILOT SCHOOLS Personnel, Aircraft, and Facilities Requirements § 141.39 Aircraft. (a... certificate or provisional pilot school certificate must show that each aircraft used by the school for...

  15. 40 CFR 87.6 - Aircraft safety.


    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Aircraft safety. 87.6 Section 87.6... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES General Provisions § 87.6 Aircraft safety. The provisions of... met within the specified time without creating a safety hazard....

  16. Western Pacific Typhoon Aircraft Fixes

    National Oceanic and Atmospheric Administration, Department of Commerce — Western Pacific typhoon aircraft reconnaissance data from the years 1946 - 1965 and 1978, excluding 1952, were transcribed from original documents, or copy of...

  17. Electromagnetic Interference In New Aircraft

    Larsen, William E.


    Report reviews plans to develop tests and standards to ensure that digital avionics systems in new civil aircraft immune to electromagnetic interference (EMI). Updated standards reflect more severe environment and vulnerabilities of modern avionics.

  18. VTOL to Transonic Aircraft Project

    National Aeronautics and Space Administration — The cyclogyro, an aircraft propulsion concept with the potential for VTOL to the lower bounds of transonic flight, is conceptually simple but structurally and...

  19. Alloy design for aircraft engines

    Pollock, Tresa M.


    Metallic materials are fundamental to advanced aircraft engines. While perceived as mature, emerging computational, experimental and processing innovations are expanding the scope for discovery and implementation of new metallic materials for future generations of advanced propulsion systems.

  20. Challenges in Aircraft Noise Prediction

    Filippone A


    This contribution addresses the problem of aircraft noise prediction using theoretical methods. The problem is set in context with the needs at several levels to produce noise characterisation from commercial aircraft powered by gas turbine engines. We describe very briefly the computational model (whilst referring the reader to the appropriate literature), and provide examples of noise predictions and comparisons with measured data, where possible. We focus on the issue of stochastic analysi...

  1. Neural networks for aircraft control

    Linse, Dennis


    Current research in Artificial Neural Networks indicates that networks offer some potential advantages in adaptation and fault tolerance. This research is directed at determining the possible applicability of neural networks to aircraft control. The first application will be to aircraft trim. Neural network node characteristics, network topology and operation, neural network learning and example histories using neighboring optimal control with a neural net are discussed.

  2. Innovations in Aircraft Design


    The Boeing 777 carries with it basic and applied research, technology, and aerodynamic knowledge honed at several NASA field centers. Several Langley Research Center innovations instrumental to the development of the aircraft include knowledge of how to reduce engine and other noise for passengers and terminal residents, increased use of lightweight aerospace composite structures for increased fuel efficiency and range, and wind tunnel tests confirming the structural integrity of 777 wing-airframe integration. Test results from Marshall Space Flight Center aimed at improving the performance of the Space Shuttle engines led to improvements in the airplane's new, more efficient jet engines. Finally, fostered by Ames Research Center, the Boeing 777 blankets that protect areas of the plane from high temperatures and fire have a lineage to Advanced Flexible Reusable Surface Insulation used on certain areas of the Space Shuttle. According to Boeing Company estimates, the 777 has captured three-quarters of new orders for airplanes in its class since the program was launched.

  3. Aircraft exhaust sulfur emissions

    Brown, R.C.; Anderson, M.R.; Miake-Lye, R.C.; Kolb, C.E. [Aerodyne Research, Inc., Billerica, MA (United States). Center for Chemical and Environmental Physics; Sorokin, A.A.; Buriko, Y.I. [Scientific Research Center `Ecolen`, Moscow (Russian Federation)


    The extent to which fuel sulfur is converted to SO{sub 3} during combustion and the subsequent turbine flow in supersonic and subsonic aircraft engines is estimated numerically. The analysis is based on: a flamelet model with non-equilibrium sulfur chemistry for the combustor, and a one-dimensional, two-stream model with finite rate chemical kinetics for the turbine. The results indicate that between 2% and 10% of the fuel sulfur is emitted as SO{sub 3}. It is also shown that, for a high fuel sulfur mass loading, conversion in the turbine is limited by the level of atomic oxygen at the combustor exit, leading to higher SO{sub 2} oxidation efficiency at lower fuel sulfur loadings. While SO{sub 2} and SO{sub 3} are the primary oxidation products, the model results further indicate H{sub 2}SO{sub 4} levels on the order of 0.1 ppm for supersonic expansions through a divergent nozzle. This source of fully oxidized S(6) (SO{sub 3} + H{sub 2}SO{sub 4}) exceeds previously calculated S(6) levels due to oxidation of SO{sub 2} by OH in the exhaust plume outside the engine nozzle. (author) 26 refs.

  4. Optimization in fractional aircraft ownership

    Septiani, R. D.; Pasaribu, H. M.; Soewono, E.; Fayalita, R. A.


    Fractional Aircraft Ownership is a new concept in flight ownership management system where each individual or corporation may own a fraction of an aircraft. In this system, the owners have privilege to schedule their flight according to their needs. Fractional management companies (FMC) manages all aspects of aircraft operations, including utilization of FMC's aircraft in combination of outsourced aircrafts. This gives the owners the right to enjoy the benefits of private aviations. However, FMC may have complicated business requirements that neither commercial airlines nor charter airlines faces. Here, optimization models are constructed to minimize the number of aircrafts in order to maximize the profit and to minimize the daily operating cost. In this paper, three kinds of demand scenarios are made to represent different flight operations from different types of fractional owners. The problems are formulated as an optimization of profit and a daily operational cost to find the optimum flight assignments satisfying the weekly and daily demand respectively from the owners. Numerical results are obtained by Genetic Algorithm method.

  5. Aircraft Cabin Environmental Quality Sensors

    Gundel, Lara; Kirchstetter, Thomas; Spears, Michael; Sullivan, Douglas


    The Indoor Environment Department at Lawrence Berkeley National Laboratory (LBNL) teamed with seven universities to participate in a Federal Aviation Administration (FAA) Center of Excellence (COE) for research on environmental quality in aircraft. This report describes research performed at LBNL on selecting and evaluating sensors for monitoring environmental quality in aircraft cabins, as part of Project 7 of the FAA's COE for Airliner Cabin Environmental Research (ACER)1 effort. This part of Project 7 links to the ozone, pesticide, and incident projects for data collection and monitoring and is a component of a broader research effort on sensors by ACER. Results from UCB and LBNL's concurrent research on ozone (ACER Project 1) are found in Weschler et al., 2007; Bhangar et al. 2008; Coleman et al., 2008 and Strom-Tejsen et al., 2008. LBNL's research on pesticides (ACER Project 2) in airliner cabins is described in Maddalena and McKone (2008). This report focused on the sensors needed for normal contaminants and conditions in aircraft. The results are intended to complement and coordinate with results from other ACER members who concentrated primarily on (a) sensors for chemical and biological pollutants that might be released intentionally in aircraft; (b) integration of sensor systems; and (c) optimal location of sensors within aircraft. The parameters and sensors were selected primarily to satisfy routine monitoring needs for contaminants and conditions that commonly occur in aircraft. However, such sensor systems can also be incorporated into research programs on environmental quality in aircraft cabins.

  6. Analysis of aircraft maintenance models

    Vlada S. Sokolović


    Full Text Available This paper addressed several organizational models of aircraft maintenance. All models presented so far have been in use in Air Forces, so that the advantages and disadvantages of different models are known. First it shows the current model of aircraft maintenance as well as its basic characteristics. Then the paper discusses two organizational models of aircraft maintenance with their advantages and disadvantages. The advantages and disadvantages of different models are analyzed based on the criteria of operational capabilities of military units. In addition to operational capabilities, the paper presents some other criteria which should be taken into account in the evaluation and selection of an optimal model of aircraft maintenance. Performing a qualitative analysis of some models may not be sufficient for evaluating the optimum choice for models of maintenance referring to the selected set of criteria from the scope of operational capabilities. In order to choose the optimum model, it is necessary to conduct a detailed economic and technical analysis of individual tactical model maintenance. A high-quality aircraft maintenance organization requires the highest state and army authorities to be involved. It is necessary to set clear objectives for all the elements of modern air force technical support programs based on the given evaluation criteria.

  7. Algorithm project weight calculation aircraft

    Г. В. Абрамова


    Full Text Available The paper describes the process of a complex technical object design on the example of the aircraft, using information technology such as CAD/CAM/CAE-systems, presents the basic models of aircraft which are developed in the process of designing and reflect the different aspects of its structure and function. The idea of control parametric model at complex technical object design is entered, which is a set of initial data for the development of design stations and enables the optimal complex technical object control at all stages of design using modern computer technology. The paper discloses a process of weight design, which is associated with all stages of development aircraft and its production. Usage of a scheduling algorithm that allows to organize weight calculations are carried out at various stages of planning and weighing options to optimize the use of available database of formulas and methods of calculation

  8. MATE. Multi Aircraft Training Environment

    Hauland, G.; Bove, T.; Andersen, Henning Boje;


    A medium fidelity and low cost training device for pilots, called the Multi Aircraft Training Environment (MATE), is developed to replace other low fidelity stand-alone training devices and integrate them into a flexible environment, primarily aimed attraining pilots in checklist procedures. The...... cockpit switches and instruments in MATE are computer-generated graphics. The graphics are back projected onto semi-transparent touch screen panels in a hybrid cockpit mock-up. Thus, the MATE is relativelycheap, it is always available, it is reconfigurable (e.g. between types of aircraft/models to be...... in the MATE prototype was compared with the effects of traditional training that included the use of realaircraft. The experimental group (EXP) trained the pre-start checklist and the engine start checklist for the Saab 340 commuter aircraft in a MATE prototype. The control group (CTR) trained the...

  9. Hydrogen aircraft and airport safety

    First flight tests with a hydrogen demonstrator aircraft, currently under investigation in the scope of the German-Russia Cryoplane project, are scheduled for 1999. Regular service with regional aircraft may begin around 2005, followed by larger Airbus-type airliners around 2010-2015. The fuel storage aboard such airliners will be of the order of 15 t or roughly 200 m3 LH2. This paper investigates a number of safety problems associated with the handling and air transport of so much hydrogen. The same is done for the infrastructure on the airport. Major risks are identified, and appropriate measures in design and operation are recommended. It is found that hydrogen aircraft are no more dangerous than conventional ones - safer in some respects. (author)

  10. Composite components on commercial aircraft

    Dexter, H. B.


    The paper considers the use of composite components in commercial aircraft. NASA has been active in sponsoring flight service programs with advanced composites for the last 10 years, with 2.5 million total composite component hours accumulated since 1970 on commercial transports and helicopters with no significant degradation in residual strength of composite components. Design, inspection, and maintenance procedures have been developed; a major NASA/US industry technology program has been developed to reduce fuel consumption of commercial transport aircraft through the use of advanced composites.

  11. Future aircraft networks and schedules

    Shu, Yan


    Because of the importance of air transportation scheduling, the emergence of small aircraft and the vision of future fuel-efficient aircraft, this thesis has focused on the study of aircraft scheduling and network design involving multiple types of aircraft and flight services. It develops models and solution algorithms for the schedule design problem and analyzes the computational results. First, based on the current development of small aircraft and on-demand flight services, this thesis expands a business model for integrating on-demand flight services with the traditional scheduled flight services. This thesis proposes a three-step approach to the design of aircraft schedules and networks from scratch under the model. In the first step, both a frequency assignment model for scheduled flights that incorporates a passenger path choice model and a frequency assignment model for on-demand flights that incorporates a passenger mode choice model are created. In the second step, a rough fleet assignment model that determines a set of flight legs, each of which is assigned an aircraft type and a rough departure time is constructed. In the third step, a timetable model that determines an exact departure time for each flight leg is developed. Based on the models proposed in the three steps, this thesis creates schedule design instances that involve almost all the major airports and markets in the United States. The instances of the frequency assignment model created in this thesis are large-scale non-convex mixed-integer programming problems, and this dissertation develops an overall network structure and proposes iterative algorithms for solving these instances. The instances of both the rough fleet assignment model and the timetable model created in this thesis are large-scale mixed-integer programming problems, and this dissertation develops subproblem schemes for solving these instances. Based on these solution algorithms, this dissertation also presents

  12. Introduction to unmanned aircraft systems

    Marshall, Douglas M; Hottman, Stephen B; Shappee, Eric; Most, Michael Thomas


    Introduction to Unmanned Aircraft Systems is the editors' response to their unsuccessful search for suitable university-level textbooks on this subject. A collection of contributions from top experts, this book applies the depth of their expertise to identify and survey the fundamentals of unmanned aircraft system (UAS) operations. Written from a nonengineering civilian operational perspective, the book starts by detailing the history of UASs and then explores current technology and what is expected for the future. Covering all facets of UAS elements and operation-including an examination of s

  13. Nondestructive testing of aging aircraft

    Aircraft fleet in the US military is getting old, averaging over 40 years. These old planes are planned to be used for additional 20-30 years. Some commercial fleets are getting older as well, though not on the same level. Many NDT methods are in practice and new ones being developed. Corrosion and fatigue are the two main sources of damage to aircraft structures and require cost-effective NDT methods to detect and characterize the damage. Current approaches to this difficult task reviewed.

  14. Estimation of nuclear power plant aircraft hazards

    The standard procedures for estimating aircraft risk to nuclear power plants provide a conservative estimate, which is adequate for most sites, which are not close to airports or heavily traveled air corridors. For those sites which are close to facilities handling large numbers of aircraft movements (airports or corridors), a more precise estimate of aircraft impact frequency can be obtained as a function of aircraft size. In many instances the very large commercial aircraft can be shown to have an acceptably small impact frequency, while the very small general aviation aircraft will not produce sufficiently serious impact to impair the safety-related functions. This paper examines the in between aircraft: primarily twin-engine, used for business, pleasure, and air taxi operations. For this group of aircraft the total impact frequency was found to be approximately once in one million years, the threshold above which further consideration of specific safety-related consequences would be required

  15. Versatile Electric Propulsion Aircraft Testbed Project

    National Aeronautics and Space Administration — An all-electric aircraft testbed is proposed to provide a dedicated development environment for the rigorous study and advancement of electrically powered aircraft....

  16. Residents' Annoyance Responses to Aircraft Noise Events

    United States, National Aeronautics and Space Administration


    In a study conducted in the vicinity of Salt Lake City International Airport, community residents reported their annoyance with individual aircraft flyovers during rating sessions conducted in their homes. Annoyance ratings were obtained at different times of the day. Aircraft noise levels were measured, and other characteristics of the aircraft were noted by trained observers. Metrics commonly used for assessing aircraft noise were compared, but none performed significantly better than A-...

  17. The NASA Aircraft Energy Efficiency program

    Klineberg, J. M.


    A review is provided of the goals, objectives, and recent progress in each of six aircraft energy efficiency programs aimed at improved propulsive, aerodynamic and structural efficiency for future transport aircraft. Attention is given to engine component improvement, an energy efficient turbofan engine, advanced turboprops, revolutionary gains in aerodynamic efficiency for aircraft of the late 1990s, laminar flow control, and composite primary aircraft structures.

  18. Fiber optic hardware for transport aircraft

    White, John A.


    Aircraft manufacturers are developing fiber optic technology to exploit the benefits in system performance and manufacturing cost reduction. The fiber optic systems have high bandwidths and exceptional Electromagnetic Interference immunity that exceeds all new aircraft design requirements. Additionally, aircraft manufacturers have shown production readiness of fiber optic systems and design feasibility.

  19. 14 CFR 91.117 - Aircraft speed.


    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aircraft speed. 91.117 Section 91.117... speed. (a) Unless otherwise authorized by the Administrator, no person may operate an aircraft below 10... than the maximum speed prescribed in this section, the aircraft may be operated at that minimum speed....

  20. 19 CFR 122.37 - Precleared aircraft.


    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Precleared aircraft. 122.37 Section 122.37 Customs... AIR COMMERCE REGULATIONS Landing Requirements § 122.37 Precleared aircraft. (a) Application. This section applies when aircraft carrying crew, passengers and baggage, or merchandise which has...

  1. 14 CFR 252.13 - Small aircraft.


    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Small aircraft. 252.13 Section 252.13 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) ECONOMIC REGULATIONS SMOKING ABOARD AIRCRAFT § 252.13 Small aircraft. Air carriers shall prohibit smoking on...

  2. 43 CFR 423.41 - Aircraft.


    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Aircraft. 423.41 Section 423.41 Public... Aircraft. (a) You must comply with any applicable Federal, State, and local laws, and with any additional... this part 423, with respect to aircraft landings, takeoffs, and operation on or in the proximity...

  3. 14 CFR 21.127 - Tests: aircraft.


    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Tests: aircraft. 21.127 Section 21.127 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS Production Under Type Certificate Only § 21.127 Tests: aircraft. (a)...

  4. 50 CFR 27.34 - Aircraft.


    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Aircraft. 27.34 Section 27.34 Wildlife and... WILDLIFE REFUGE SYSTEM PROHIBITED ACTS Disturbing Violations: With Vehicles § 27.34 Aircraft. The unauthorized operation of aircraft, including sail planes, and hang gliders, at altitudes resulting...

  5. 36 CFR 13.1004 - Aircraft use.


    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Aircraft use. 13.1004 Section... § 13.1004 Aircraft use. In extraordinary cases where no reasonable alternative exists, local rural residents who permanently reside in the following exempted community(ies) may use aircraft for access...

  6. 48 CFR 908.7102 - Aircraft.


    ... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition of Special Items 908.7102 Aircraft. Acquisition of aircraft shall be in accordance with DOE-PMR 41 CFR 109-38.5205. ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Aircraft. 908.7102...

  7. 47 CFR 32.2113 - Aircraft.


    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Aircraft. 32.2113 Section 32.2113... FOR TELECOMMUNICATIONS COMPANIES Instructions for Balance Sheet Accounts § 32.2113 Aircraft. This account shall include the original cost of aircraft and any associated equipment and furnishings...

  8. Policy and the evaluation of aircraft noise

    Kroesen, M.; Molin, E.J.E.; Van Wee, G.P.


    In this paper, we hypothesize and test the ideas that (1) people’s subjectivity in relation to aircraft noise is shaped by the policy discourse, (2) this results in a limited number of frames towards aircraft noise, (3) the frames inform people how to think and feel about aircraft noise and (4) the




    Aircraft maintenance, as a specific field of military materiel maintenance, is characterized by high reliability standards, based on regulations and technical standards. A system approach to maintenance represents the key element of maintenance quality, while aircraft maintenance staff has a crucial influence on the final outcome of aircraft maintenance.

  10. 14 CFR 91.209 - Aircraft lights.


    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aircraft lights. 91.209 Section 91.209... Requirements § 91.209 Aircraft lights. No person may: (a) During the period from sunset to sunrise (or, in... or the sun is more than 6 degrees below the horizon)— (1) Operate an aircraft unless it has...

  11. 19 CFR 122.42 - Aircraft entry.


    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Aircraft entry. 122.42 Section 122.42 Customs... AIR COMMERCE REGULATIONS Aircraft Entry and Entry Documents; Electronic Manifest Requirements for Passengers, Crew Members, and Non-Crew Members Onboard Commercial Aircraft Arriving In, Continuing...

  12. 31 CFR 560.528 - Aircraft safety.


    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Aircraft safety. 560.528 Section 560..., Authorizations and Statements of Licensing Policy § 560.528 Aircraft safety. Specific licenses may be issued on a... the safety of civil aviation and safe operation of U.S.-origin commercial passenger aircraft....

  13. Aircraft Mechanics: Scope and Sequence.

    Nashville - Davidson County Metropolitan Public Schools, TN.

    This scope and sequence guide, developed for an aircraft mechanics vocational education program, represents an initial step in the development of a systemwide articulated curriculum sequence for all vocational programs within the Metropolitan Nashville Public School System. It was developed as a result of needs expressed by teachers, parents, and…

  14. Subsonic Aircraft Safety Icing Study

    Jones, Sharon Monica; Reveley, Mary S.; Evans, Joni K.; Barrientos, Francesca A.


    NASA's Integrated Resilient Aircraft Control (IRAC) Project is one of four projects within the agency s Aviation Safety Program (AvSafe) in the Aeronautics Research Mission Directorate (ARMD). The IRAC Project, which was redesigned in the first half of 2007, conducts research to advance the state of the art in aircraft control design tools and techniques. A "Key Decision Point" was established for fiscal year 2007 with the following expected outcomes: document the most currently available statistical/prognostic data associated with icing for subsonic transport, summarize reports by subject matter experts in icing research on current knowledge of icing effects on control parameters and establish future requirements for icing research for subsonic transports including the appropriate alignment. This study contains: (1) statistical analyses of accident and incident data conducted by NASA researchers for this "Key Decision Point", (2) an examination of icing in other recent statistically based studies, (3) a summary of aviation safety priority lists that have been developed by various subject-matter experts, including the significance of aircraft icing research in these lists and (4) suggested future requirements for NASA icing research. The review of several studies by subject-matter experts was summarized into four high-priority icing research areas. Based on the Integrated Resilient Aircraft Control (IRAC) Project goals and objectives, the IRAC project was encouraged to conduct work in all of the high-priority icing research areas that were identified, with the exception of the developing of methods to sense and document actual icing conditions.

  15. Aircraft Lightning Electromagnetic Environment Measurement

    Ely, Jay J.; Nguyen, Truong X.; Szatkowski, George N.


    This paper outlines a NASA project plan for demonstrating a prototype lightning strike measurement system that is suitable for installation onto research aircraft that already operate in thunderstorms. This work builds upon past data from the NASA F106, FAA CV-580, and Transall C-180 flight projects, SAE ARP5412, and the European ILDAS Program. The primary focus is to capture airframe current waveforms during attachment, but may also consider pre and post-attachment current, electric field, and radiated field phenomena. New sensor technologies are being developed for this system, including a fiber-optic Faraday polarization sensor that measures lightning current waveforms from DC to over several Megahertz, and has dynamic range covering hundreds-of-volts to tens-of-thousands-of-volts. A study of the electromagnetic emission spectrum of lightning (including radio wave, microwave, optical, X-Rays and Gamma-Rays), and a compilation of aircraft transfer-function data (including composite aircraft) are included, to aid in the development of other new lightning environment sensors, their placement on-board research aircraft, and triggering of the onboard instrumentation system. The instrumentation system will leverage recent advances in high-speed, high dynamic range, deep memory data acquisition equipment, and fiber-optic interconnect.

  16. Human Response to Aircraft Noise

    Kroesen, M.


    How can it be that one person is extremely annoyed by the sounds of aircrafts, while his neighbour claims not to be bothered at all? The present thesis attempts to explain this observation by applying a range of quantitative methods to field data gathered among residents living near large airports.

  17. Survival analysis of aging aircraft

    Benavides, Samuel

    This study pushes systems engineering of aging aircraft beyond the boundaries of empirical and deterministic modeling by making a sharp break with the traditional laboratory-derived corrosion prediction algorithms that have shrouded real-world failures of aircraft structure. At the heart of this problem is the aeronautical industry's inability to be forthcoming in an accurate model that predicts corrosion failures in aircraft in spite of advances in corrosion algorithms or improvements in simulation and modeling. The struggle to develop accurate corrosion probabilistic models stems from a multitude of real-world interacting variables that synergistically influence corrosion in convoluted and complex ways. This dissertation, in essence, offers a statistical framework for the analysis of structural airframe corrosion failure by utilizing real-world data while considering the effects of interacting corrosion variables. This study injects realism into corrosion failures of aging aircraft systems by accomplishing four major goals related to the conceptual and methodological framework of corrosion modeling. First, this work connects corrosion modeling from the traditional, laboratory derived algorithms to corrosion failures in actual operating aircraft. This work augments physics-based modeling by examining the many confounding and interacting variables, such as environmental, geographical and operational, that impact failure of airframe structure. Examined through the lens of censored failure data from aircraft flying in a maritime environment, this study enhances the understanding between the triad of the theoretical, laboratory and real-world corrosion. Secondly, this study explores the importation and successful application of an advanced biomedical statistical tool---survival analysis---to model censored corrosion failure data. This well-grounded statistical methodology is inverted from a methodology that analyzes survival to one that examines failures. Third, this

  18. Stability-Augmentation Devices for Miniature Aircraft

    Wood, RIchard M.


    Non-aerodynamic mechanical devices are under consideration as means to augment the stability of miniature autonomous and remotely controlled aircraft. Such aircraft can be used for diverse purposes, including military reconnaissance, radio communications, and safety-related monitoring of wide areas. The need for stability-augmentation devices arises because adverse meteorological conditions generally affect smaller aircraft more strongly than they affect larger aircraft: Miniature aircraft often become uncontrollable under conditions that would not be considered severe enough to warrant grounding of larger aircraft. The need for the stability-augmentation devices to be non-aerodynamic arises because there is no known way to create controlled aerodynamic forces sufficient to counteract the uncontrollable meteorological forces on miniature aircraft. A stability-augmentation device of the type under consideration includes a mass pod (a counterweight) at the outer end of a telescoping shaft, plus associated equipment to support the operation of the aircraft. The telescoping shaft and mass pod are stowed in the rear of the aircraft. When deployed, they extend below the aircraft. Optionally, an antenna for radio communication can be integrated into the shaft. At the time of writing this article, the deployment of the telescoping shaft and mass pod was characterized as passive and automatic, but information about the deployment mechanism(s) was not available. The feasibility of this stability-augmentation concept was demonstrated in flights of hand-launched prototype aircraft.

  19. Perception of aircraft Deviation Cues

    Martin, Lynne; Azuma, Ronald; Fox, Jason; Verma, Savita; Lozito, Sandra


    To begin to address the need for new displays, required by a future airspace concept to support new roles that will be assigned to flight crews, a study of potentially informative display cues was undertaken. Two cues were tested on a simple plan display - aircraft trajectory and flight corridor. Of particular interest was the speed and accuracy with which participants could detect an aircraft deviating outside its flight corridor. Presence of the trajectory cue significantly reduced participant reaction time to a deviation while the flight corridor cue did not. Although non-significant, the flight corridor cue seemed to have a relationship with the accuracy of participants judgments rather than their speed. As this is the second of a series of studies, these issues will be addressed further in future studies.

  20. Aircraft noise and birth weight

    Knipschild, P.; Meijer, H.; Salle, H.


    Data from six infant welfare centres in the vicinity of Amsterdam airport were analysed. Birth weights of 902 infants were related to aircraft noise levels to which the mother was exposed in pregnancy. The analysis was restricted to deliveries in hospital, single births and mothers aged 20-34 years. In high noise areas the mean birth weight was 69 g lower than in low noise areas. Of the infants in high noise areas 24% had a birth weight less than 3000 g, compared with 18% in low noise areas. In the analysis the effect of sex of the infant, birth order and to some extent socio-economic status were taken into account. An effect of smoking seemed unlikely. The results, together with existing knowledge, give some suggestion that aircraft noise can decrease birth weight.

  1. Aircraft emissions at Turkish airports

    This paper deals with estimating aircraft landing and take-off (LTO) emissions (HC, CO, NOx, SO2) at 40 Turkish airports including the biggest airports, i.e. Ataturk International Airport (AIA) in Istanbul, Antalya Airport in Antalya and Esenboga Airport in Ankara in 2001. The calculation model is based on flight data recorded by the State Airports Authority. The flight data include the type and number of aircraft, number of passengers, amount of cargo etc., which depend on day-time and date. For the emission calculations the International Civil Aviation Organization (ICAO)-Engine emission data bank, which includes minimum and maximum values for both fuel flow rates and emissions factors, is used. By using first the minimum and then the maximum values from the data bank, two estimations of aircraft LTO emissions at Turkish airports are calculated: i.e. minimum and maximum estimations. Total LTO emissions from aircraft at Turkish airports are estimated to be between 7614.34 and 8338.79 t/year. These results are comparable with those from USA airports. Approximately half of these amounts are produced at AIA. To predict future emissions, it is estimated that an increase of 25% in LTO cycles might cause a rise of between 31 and 33% in emissions. The estimations show that a decrease of 2 min in taxiing time results in a decrease of 6% in LTO emissions. The estimation model used in this study can be used for expansions and planning of airports from an environmental point of view. (author)

  2. Challenges of aircraft design integration

    Kafyeke, F.; Abdo, M.; Pepin, F; Piperni, P.; Laurendeau, E.


    The design of a modern airplane brings together many disciplines: structures, aerodynamics, controls, systems, propulsion with complex interdependencies and many variables. Recent aircraft programs, such as Bombardier's Continental Jet program use participants located around the world and selected for their cost, quality and delivery capability. These participants share the risk on the program and must therefore be fully implicated in the design. A big challenge is to provide information on c...

  3. Stochastic Methods for Aircraft Design

    Pelz, Richard B.; Ogot, Madara


    The global stochastic optimization method, simulated annealing (SA), was adapted and applied to various problems in aircraft design. The research was aimed at overcoming the problem of finding an optimal design in a space with multiple minima and roughness ubiquitous to numerically generated nonlinear objective functions. SA was modified to reduce the number of objective function evaluations for an optimal design, historically the main criticism of stochastic methods. SA was applied to many CFD/MDO problems including: low sonic-boom bodies, minimum drag on supersonic fore-bodies, minimum drag on supersonic aeroelastic fore-bodies, minimum drag on HSCT aeroelastic wings, FLOPS preliminary design code, another preliminary aircraft design study with vortex lattice aerodynamics, HSR complete aircraft aerodynamics. In every case, SA provided a simple, robust and reliable optimization method which found optimal designs in order 100 objective function evaluations. Perhaps most importantly, from this academic/industrial project, technology has been successfully transferred; this method is the method of choice for optimization problems at Northrop Grumman.

  4. Aircraft systems design methodology and dispatch reliability prediction

    Bineid, Mansour


    Aircraft despatch reliability was the main subject of this research in the wider content of aircraft reliability. The factors effecting dispatch reliability, aircraft delay, causes of aircraft delays, and aircraft delay costs and magnitudes were examined. Delay cost elements and aircraft delay scenarios were also studied. It concluded that aircraft dispatch reliability is affected by technical and non-technical factors, and that the former are under the designer's control. It showed that ...


    Clark, B. J.


    Methods developed at the NASA Lewis Research Center for predicting the noise contributions from various aircraft noise sources have been incorporated into a computer program for predicting aircraft noise levels either in flight or in ground test. The noise sources accounted for include fan inlet and exhaust, jet, flap (for powered lift), core (combustor), turbine, and airframe. Noise propagation corrections are available in the program for atmospheric attenuation, ground reflections, extra ground attenuation, and shielding. The capacity to solve the geometrical relationships between an aircraft in flight and an observer on the ground has been included in the program to make it useful in evaluating noise estimates and footprints for various proposed engine installations. The program contains two main routines for employing the noise prediction routines. The first main routine consists of a procedure to calculate at various observer stations the time history of the noise from an aircraft flying at a specified set of speeds, orientations, and space coordinates. The various components of the noise are computed by the program. For each individual source, the noise levels are free field with no corrections for propagation losses other than spherical divergence. The total spectra may then be corrected for the usual effects of atmospheric attenuation, extra ground attenuation, ground reflection, and aircraft shielding. Next, the corresponding values of overall sound pressure level, perceived noise level, and tone-weighted perceived noise level are calculated. From the time history at each point, true effective perceived noise levels are calculated. Thus, values of effective perceived noise levels, maximum perceived noise levels, and tone-weighted perceived noise levels are found for a grid of specified points on the ground. The second main routine is designed to give the usual format of one-third octave sound pressure level values at a fixed radius for a number of user

  6. AIRTV: Broadband Direct to Aircraft

    Sorbello, R.; Stone, R.; Bennett, S. B.; Bertenyi, E.


    Airlines have been continuously upgrading their wide-body, long-haul aircraft with IFE (in-flight entertainment) systems that can support from 12 to 24 channels of video entertainment as well as provide the infrastructure to enable in-seat delivery of email and internet services. This is a direct consequence of increased passenger demands for improved in-flight services along with the expectations that broadband delivery systems capable of providing live entertainment (news, sports, financial information, etc.) and high speed data delivery will soon be available. The recent events of Sept. 11 have slowed the airline's upgrade of their IFE systems, but have also highlighted the compelling need for broadband aeronautical delivery systems to include operational and safety information. Despite the impact of these events, it is estimated that by 2005 more than 3000 long haul aircraft (servicing approximately 1 billion passengers annually) will be fully equipped with modern IFE systems. Current aircraft data delivery systems, which use either Inmarsat or NATS, are lacking in bandwidth and consequently are unsuitable to satisfy passenger demands for broadband email/internet services or the airlines' burgeoning data requirements. Present live video delivery services are limited to regional coverage and are not readily expandable to global or multiregional service. Faced with a compelling market demand for high data transport to aircraft, AirTV has been developing a broadband delivery system that will meet both passengers' and airlines' needs. AirTV is a global content delivery system designed to provide a range of video programming and data services to commercial airlines. When AirTV is operational in 2004, it will provide a broadband connection directly to the aircraft, delivering live video entertainment, internet/email service and essential operational and safety data. The system has been designed to provide seamless global service to all airline routes except for those

  7. Advanced technology for future regional transport aircraft

    Williams, L. J.


    In connection with a request for a report coming from a U.S. Senate committee, NASA formed a Small Transport Aircraft Technology (STAT) team in 1978. STAT was to obtain information concerning the technical improvements in commuter aircraft that would likely increase their public acceptance. Another area of study was related to questions regarding the help which could be provided by NASA's aeronautical research and development program to commuter aircraft manufacturers with respect to the solution of technical problems. Attention is given to commuter airline growth, current commuter/region aircraft and new aircraft in development, prospects for advanced technology commuter/regional transports, and potential benefits of advanced technology. A list is provided of a number of particular advances appropriate to small transport aircraft, taking into account small gas turbine engine component technology, propeller technology, three-dimensional wing-design technology, airframe aerodynamics/propulsion integration, and composite structure materials.

  8. Choice of Aircraft Size - Explanations and Implications

    Givoni, Moshe; Rietveld, Piet


    To keep load factors high while offering high frequency service, airlines tend to reduce the size of the aircraft they use. At many of the world’s largest airports there are fewer than 100 passengers per air transport movement, although congestion and delays are growing. Furthermore, demand for air transport is predicted to continue growing but aircraft size is not. This paper aims to investigate and explain this phenomenon, the choice of relatively small aircraft. It seems that this choice i...

  9. Neural Networks Based Aircraft Fault Tolerant Control

    Zhong, Lunlong; Mora-Camino, Félix


    The purpose of this communication is to deal with the case in which an aerodynamic actuator failure occurs to an aircraft while it has to perform guidance maneuvers. The problem considered deals with the reallocation of redundant actuators to perform the required maneuvers and maintain the structural integrity of the aircraft. A Nonlinear Inverse Control technique is used to generate online nominal moment along the three axis of the aircraft. Then, taking into account all material and structu...

  10. AIRTV: Broadband Direct to Aircraft

    Sorbello, R.; Stone, R.; Bennett, S. B.; Bertenyi, E.


    Airlines have been continuously upgrading their wide-body, long-haul aircraft with IFE (in-flight entertainment) systems that can support from 12 to 24 channels of video entertainment as well as provide the infrastructure to enable in-seat delivery of email and internet services. This is a direct consequence of increased passenger demands for improved in-flight services along with the expectations that broadband delivery systems capable of providing live entertainment (news, sports, financial information, etc.) and high speed data delivery will soon be available. The recent events of Sept. 11 have slowed the airline's upgrade of their IFE systems, but have also highlighted the compelling need for broadband aeronautical delivery systems to include operational and safety information. Despite the impact of these events, it is estimated that by 2005 more than 3000 long haul aircraft (servicing approximately 1 billion passengers annually) will be fully equipped with modern IFE systems. Current aircraft data delivery systems, which use either Inmarsat or NATS, are lacking in bandwidth and consequently are unsuitable to satisfy passenger demands for broadband email/internet services or the airlines' burgeoning data requirements. Present live video delivery services are limited to regional coverage and are not readily expandable to global or multiregional service. Faced with a compelling market demand for high data transport to aircraft, AirTV has been developing a broadband delivery system that will meet both passengers' and airlines' needs. AirTV is a global content delivery system designed to provide a range of video programming and data services to commercial airlines. When AirTV is operational in 2004, it will provide a broadband connection directly to the aircraft, delivering live video entertainment, internet/email service and essential operational and safety data. The system has been designed to provide seamless global service to all airline routes except for those

  11. 19 CFR 122.132 - Sealing of aircraft liquor kits.


    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Sealing of aircraft liquor kits. 122.132 Section... OF THE TREASURY AIR COMMERCE REGULATIONS Aircraft Liquor Kits § 122.132 Sealing of aircraft liquor kits. (a) Sealing required. Aircraft liquor kits shall be sealed on board the aircraft by...

  12. 14 CFR 91.111 - Operating near other aircraft.


    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Operating near other aircraft. 91.111... § 91.111 Operating near other aircraft. (a) No person may operate an aircraft so close to another aircraft as to create a collision hazard. (b) No person may operate an aircraft in formation flight...

  13. Impact of aircraft systems within aircraft operation: A MEA trajectory optimisation study

    Seresinhe, R.


    Air transport has been a key component of the socio-economic globalisation. The ever increasing demand for air travel and air transport is a testament to the success of the aircraft. But this growing demand presents many challenges. One of which is the environmental impact due to aviation. The scope of the environmental impact of aircraft can be discussed from many viewpoints. This research focuses on the environmental impact due to aircraft operation. Aircraft operation causes...

  14. Research on Emerging and Descending Aircraft Noise

    Monika Bartkevičiūtė


    Full Text Available Along with an increase in the aircraft engine power and growth in air traffic, noise level at airports and their surrounding environs significantly increases. Aircraft noise is high level noise spreading within large radius and intensively irritating the human body. Air transport is one of the main sources of noise having a particularly strong negative impact on the environment. The article deals with activities and noises taking place in the largest nationwide Vilnius International Airport.The level of noise and its dispersion was evaluated conducting research on the noise generated by emerging and descending aircrafts in National Vilnius Airport. Investigation was carried out at 2 measuring points located in a residential area. There are different types of aircrafts causing different sound levels. It has been estimated the largest exceedances that occur when an aircraft is approaching. In this case, the noisiest types of aircrafts are B733, B738 and AT72. The sound level varies from 70 to 85 dBA. The quietest aircrafts are RJ1H and F70. When taking off, the equivalent of the maximum sound level value of these aircrafts does not exceed the authorized limits. The paper describes the causes of noise in aircrafts, the sources of origin and the impact of noise on humans and the environment.Article in Lithuanian

  15. Policy and the evaluation of aircraft noise

    Kroesen, M.; Molin, E.J.E.; Van Wee, G.P.


    In this paper, we hypothesize and test the ideas that (1) people’s subjectivity in relation to aircraft noise is shaped by the policy discourse, (2) this results in a limited number of frames towards aircraft noise, (3) the frames inform people how to think and feel about aircraft noise and (4) the distribution of the frames in the population is dependent on structural variables related to the individual. To reveal subjects’ frames of aircraft noise a latent class model is estimated based on ...

  16. NDT applications in the aircraft industry

    Non-destructive testing (NDT) in the aircraft industry is used primarily to detect process defects in the manufacturing stage and failure defects in the in-service stage. Inspection techniques such as X- or gamma ray radiography are used for examination. Eddy current and ultrasonic are applied for examination, fluorescent penetrant and magnetic particles are applied for examination of aircraft and engine. With the wide scope of application, this paper discussed one type of NDT that is much used in aircraft being the latest technique in aircraft manufacturing. 1 fig

  17. Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL)

    Federal Laboratory Consortium — Purpose: The Aircraft Wiring Support Equipment Integration Laboratory (AWSEIL) provides a variety of research, design engineering and prototype fabrication services...

  18. Challenges for the aircraft structural integrity program

    Lincoln, John W.


    Thirty-six years ago the United States Air Force established the USAF Aircraft Structural Integrity Program (ASIP) because flight safety had been degraded by fatigue failures of operational aircraft. This initial program evolved, but has been stable since the issuance of MIL-STD-1530A in 1975. Today, the program faces new challenges because of a need to maintain aircraft longer in an environment of reduced funding levels. Also, there is increased pressure to reduce cost of the acquisition of new aircraft. It is the purpose of this paper to discuss the challenges for the ASIP and identify the changes in the program that will meet these challenges in the future.

  19. 75 FR 51953 - Notification and Reporting of Aircraft Accidents or Incidents and Overdue Aircraft, and...


    ... applicability of these regulations to unmanned aircraft systems (UAS). The proposed definition stated... unmanned aircraft system that takes place between the time that the system is activated with the purpose of... notification and reporting of aircraft accidents or incidents by adding a definition of ``unmanned......


    Matei POPA


    Full Text Available In accordance with Air Force requirements, the comparative analysis of short/medium transport aircraft comes to sustain procurement decision of short/medium transport aircraft. This paper presents, in short, the principles and the results of the comparative analysis for short/medium military transport aircraft.

  1. Altus I aircraft on lakebed


    The remotely-piloted Altus I aircraft climbs away after takeoff from Rogers Dry Lake adjacent to NASA's Dryden Flight Research Center, Edwards, Calif. The short series of test flights sponsored by the Naval Postgraduate School in early August, 1997, were designed to demonstrate the ability of the experimental craft to cruise at altitudes above 40,000 feet for sustained durations. On its final flight Aug. 15, the Altus I reached an altitude of 43,500 feet. The Altus I and its sister ship, the Altus II, are variants of the Predator surveillance drone built by General Atomics/Aeronautical Systems, Inc. They are designed for high-altitude, long-duration scientific sampling missions, and are powered by turbocharged piston engines. The Altus I incorporates a single-stage turbocharger, while the Altus II, built for NASA's Environmental Research Aircraft and Sensor Technology program, sports a two-stage turbocharger to enable the craft to fly at altitudes above 55,000 feet. The Altus II, the first of the two craft to be completed, made its first flight on May 1, 1996. With its engine augmented by a single-stage turbocharger, the Altus II reached an altitude of 37,000 ft during its first series of development flights at Dryden in Aug., 1996. In Oct. of that year, the Altus II was flown in an Atmospheric Radiation Measurement study for the Department of Energy's Sandia National Laboratory in Oklahoma. During the course of those flights, the Altus II set a single-flight endurance record for remotely-operated aircraft of more than 26 hours. The Altus I, completed in 1997, flew a series of development flights at Dryden that summer. Those test flights culminated with the craft reaching an altitude of 43,500 ft while carrying a simulated 300-lb payload, a record for an unmanned aircraft powered by a piston engine augmented with a single-stage turbocharger. The Altus II sustained an altitudeof 55,000 feet for four hours in 1999. A pilot in a control station on the ground flies the

  2. Technology for aircraft energy efficiency

    Klineberg, J. M.


    Six technology programs for reducing fuel use in U.S. commercial aviation are discussed. The six NASA programs are divided into three groups: Propulsion - engine component improvement, energy efficient engine, advanced turboprops; Aerodynamics - energy efficient transport, laminar flow control; and Structures - composite primary structures. Schedules, phases, and applications of these programs are considered, and it is suggested that program results will be applied to current transport derivatives in the early 1980s and to all-new aircraft of the late 1980s and early 1990s.

  3. Aircraft type influence on contrail properties

    P. Jeßberger


    Full Text Available The investigation of the impact of aircraft parameters on contrail properties helps to better understand the climate impact from aviation. Yet, in observations, it is a challenge to separate aircraft and meteorological influences on contrail formation. During the CONCERT campaign in November 2008, contrails from 3 Airbus passenger aircraft of type A319-111, A340-311 and A380-841 were probed at cruise under similar meteorological conditions with in-situ instruments on board the DLR research aircraft Falcon. Within the 2 min old contrails detected near ice saturation, we find similar effective diameters Deff (5.2–5.9 μm, but differences in particle number densities nice (162–235 cm−3 and in vertical contrail extensions (120–290 m, resulting in large differences in contrail optical depths τ (0.25–0.94. Hence larger aircraft produce optically thicker contrails. Based on the observations, we apply the EULAG-LCM model with explicit ice microphysics and in addition the Contrail and Cirrus Prediction model CoCiP to calculate the aircraft type impact on young contrails under identical meteorological conditions. The observed increase in τ for heavier aircraft is confirmed by the models, yet for generally smaller τ. An aircraft dependence of climate relevant contrail properties persists during contrail lifetime, adding importance to aircraft dependent model initialization. We finally derive an analytical relationship between contrail, aircraft and meteorological parameters. Near ice saturation, contrail width × τ scales linearly with fuel flow rate as confirmed by observations. For higher saturation ratios approximations from theory suggest a non-linear increase in the form (RHI–12/3. Summarized our combined results could help to more accurately assess the climate impact from aviation using an aircraft dependent contrail parameterization.

  4. Multispectral imaging of aircraft exhaust

    Berkson, Emily E.; Messinger, David W.


    Aircraft pollutants emitted during the landing-takeoff (LTO) cycle have significant effects on the local air quality surrounding airports. There are currently no inexpensive, portable, and unobtrusive sensors to quantify the amount of pollutants emitted from aircraft engines throughout the LTO cycle or to monitor the spatial-temporal extent of the exhaust plume. We seek to thoroughly characterize the unburned hydrocarbon (UHC) emissions from jet engine plumes and to design a portable imaging system to remotely quantify the emitted UHCs and temporally track the distribution of the plume. This paper shows results from the radiometric modeling of a jet engine exhaust plume and describes a prototype long-wave infrared imaging system capable of meeting the above requirements. The plume was modeled with vegetation and sky backgrounds, and filters were selected to maximize the detectivity of the plume. Initial calculations yield a look-up chart, which relates the minimum amount of emitted UHCs required to detect the presence of a plume to the noise-equivalent radiance of a system. Future work will aim to deploy the prototype imaging system at the Greater Rochester International Airport to assess the applicability of the system on a national scale. This project will help monitor the local pollution surrounding airports and allow better-informed decision-making regarding emission caps and pollution bylaws.

  5. The longitudinal static stability of tailless aircraft

    de Castro, Helena V.


    This paper describes the development of a simple theory of the longitudinal controls fixed static stability of tailless aeroplanes. The classical theory, as developed for the conventional aircraft, is modified to accommodate the particular features of the tailless aeroplanes. The theory was then applied to a particular blended-wing-body tailless civil transport aircraft, BWB-98.

  6. 14 CFR 121.538 - Aircraft security.


    ..., FLAG, AND SUPPLEMENTAL OPERATIONS Flight Operations § 121.538 Aircraft security. Certificate holders conducting operations under this part must comply with the applicable security requirements in 49 CFR chapter... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Aircraft security. 121.538 Section...

  7. 14 CFR 135.125 - Aircraft security.


    ....125 Aircraft security. Certificate holders conducting operators conducting operations under this part must comply with the applicable security requirements in 49 CFR chapter XII. ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Aircraft security. 135.125 Section...

  8. Laminar flow control for transport aircraft applications

    Wagner, R. D.


    The incorporation of laminar flow control into transport aircraft is discussed. Design concepts for the wing surface panel of laminar flow control transport aircraft are described. The development of small amounts of laminar flow on small commercial transports with natural or hybrid flow control is examined. Techniques for eliminating the insect contamination problem in the leading-edge region are proposed.

  9. Noise control mechanisms of inside aircraft

    Zverev, A. Ya.


    World trends in the development of methods and approaches to noise reduction in aircraft cabins are reviewed. The paper discusses the mechanisms of passive and active noise and vibration control, application of "smart" and innovative materials, new approaches to creating all fuselage-design elements, and other promising directions of noise control inside aircraft.

  10. Aircraft Stand Allocation with Associated Resource Scheduling

    Justesen, Tor Fog; Larsen, Jesper; Lusby, Richard Martin;

    different ground handling resources (taxiways, aircraft stands, gates, etc) at different times. Each resource can be claimed by at most one turn-round at a time. The aircraft stand allocation problem with associated resource scheduling is the problem of allocating the required ground handling resources to...

  11. Wireless Network Simulation in Aircraft Cabins

    Beggs, John H.; Youssef, Mennatoallah; Vahala, Linda


    An electromagnetic propagation prediction tool was used to predict electromagnetic field strength inside airplane cabins. A commercial software package, Wireless Insite, was used to predict power levels inside aircraft cabins and the data was compared with previously collected experimental data. It was concluded that the software could qualitatively predict electromagnetic propagation inside the aircraft cabin environment.

  12. Study on Impedance Characteristics of Aircraft Cables

    Weilin Li


    Full Text Available Voltage decrease and power loss in distribution lines of aircraft electric power system are harmful to the normal operation of electrical equipment and may even threaten the safety of aircraft. This study investigates how the gap distance (the distance between aircraft cables and aircraft skin and voltage frequency (variable frequency power supply will be adopted for next generation aircraft will affect the impedance of aircraft cables. To be more precise, the forming mechanism of cable resistance and inductance is illustrated in detail and their changing trends with frequency and gap distance are analyzed with the help of electromagnetic theoretical analysis. An aircraft cable simulation model is built with Maxwell 2D and the simulation results are consistent with the conclusions drawn from the theoretical analysis. The changing trends of the four core parameters of interest are analyzed: resistance, inductance, reactance, and impedance. The research results can be used as reference for the applications in Variable Speed Variable Frequency (VSVF aircraft electric power system.

  13. Aircraft Manufacturing Occupations. Aviation Careers Series.

    Zaharevitz, Walter

    This booklet, one in a series on aviation careers, outlines the variety of careers available in the aircraft manufacturing industry. The first part of the booklet provides general information about careers in the aerospace industry (of which aircraft manufacturing is one part), including the numbers of various types of workers employed in those…

  14. Scorpion: Close Air Support (CAS) aircraft

    Allen, Chris; Cheng, Rendy; Koehler, Grant; Lyon, Sean; Paguio, Cecilia


    The objective is to outline the results of the preliminary design of the Scorpion, a proposed close air support aircraft. The results obtained include complete preliminary analysis of the aircraft in the areas of aerodynamics, structures, avionics and electronics, stability and control, weight and balance, propulsion systems, and costs. A conventional wing, twin jet, twin-tail aircraft was chosen to maximize the desirable characteristics. The Scorpion will feature low speed maneuverability, high survivability, low cost, and low maintenance. The life cycle cost per aircraft will be 17.5 million dollars. The maximum takeoff weight will be 52,760 pounds. Wing loading will be 90 psf. The thrust to weight will be 0.6 lbs/lb. This aircraft meets the specified mission requirements. Some modifications have been suggested to further optimize the design.

  15. Small Aircraft RF Interference Path Loss Measurements

    Nguyen, Truong X.; Koppen, Sandra V.; Ely, Jay J.; Szatkowski, George N.; Mielnik, John J.; Salud, Maria Theresa P.


    Interference to aircraft radio receivers is an increasing concern as more portable electronic devices are allowed onboard. Interference signals are attenuated as they propagate from inside the cabin to aircraft radio antennas mounted on the outside of the aircraft. The attenuation level is referred to as the interference path loss (IPL) value. Significant published IPL data exists for transport and regional category airplanes. This report fills a void by providing data for small business/corporate and general aviation aircraft. In this effort, IPL measurements are performed on ten small aircraft of different designs and manufacturers. Multiple radio systems are addressed. Along with the typical worst-case coupling values, statistical distributions are also reported that could lead to more meaningful interference risk assessment.

  16. Small Aircraft RF Interference Path Loss

    Nguyen, Truong X.; Koppen, Sandra V.; Ely, Jay J.; Szatkowski, George N.; Mielnik, John J.; Salud, Maria Theresa P.


    Interference to aircraft radio receivers is an increasing concern as more portable electronic devices are allowed onboard. Interference signals are attenuated as they propagate from inside the cabin to aircraft radio antennas mounted on the outside of the aircraft. The attenuation level is referred to as the interference path loss (IPL) value. Significant published IPL data exists for transport and regional category airplanes. This report fills a void by providing data for small business/corporate and general aviation aircraft. In this effort, IPL measurements are performed on ten small aircraft of different designs and manufacturers. Multiple radio systems are addressed. Along with the typical worst-case coupling values, statistical distributions are also reported that could lead to better interference risk assessment.

  17. Infrared thermographic diagnostic aid to aircraft maintenance

    Delo, Michael; Delo, Steve


    Thermographic data can be used as a supplement to aircraft maintenance operations in both back shop and flight line situations. Aircraft systems such as electrical, propulsion, environmental, pitot static and hydraulic/pneumatic fluid, can be inspected using a thermal infrared (IR) imager. Aircraft systems utilize electro-hydraulic, electro-mechanical, and electro-pneumatic mechanisms, which, if accessible, can be diagnosed for faults using infrared technology. Since thermographs are images of heat, rather than light, the measurement principle is based on the fact that any physical object (radiating energy at infrared wavelengths within the IR portion of the electro-magnetic spectrum), can be imaged with infrared imaging equipment. All aircraft systems being tested with infrared are required to be energized for troubleshooting, so that valuable baseline data from fully operational aircraft can be collected, archived and referenced for future comparisons.

  18. A Turbo-Brayton Cryocooler for Aircraft Superconducting Systems Project

    National Aeronautics and Space Administration — Hybrid turboelectric aircraft with gas turbines driving electric generators connected to electric propulsion motors have the potential to transform the aircraft...

  19. An Instrument to Measure Aircraft Sulfate Particle Emissions Project

    National Aeronautics and Space Administration — Aircraft particle emissions contribute a modest, but growing, portion of the overall particle emissions budget. Characterizing aircraft particle emissions is...

  20. TEPC measurements in commercial aircraft

    The collaborative project involving the Mullard Space Science Laboratory (MSSL), Virgin Atlantic Airways (VAA), the UK Civil Aviation Authority (CAA) and the UK National Physical Laboratory (NPL) has been performing tissue-equivalent proportional counter measurements of cosmic ray doses in commercial aircraft since January 2000. In that time data have been recorded on over 700 flights, including over 150 flights with Air New Zealand (ANZ). This substantial set of data from the southern hemisphere is an ideal complement to the London-based measurements performed primarily on VAA flights. Although some ANZ data remains to be analysed, dose information from 111 flights has been compared with the CARI and EPCARD computer codes. Overall, the agreement between the measurements and EPCARD was excellent (within 1% for the total ambient dose equivalent), and the difference in the total effective doses predicted by EPCARD and CARI was <5%. (authors)

  1. Aircraft wing structure detail design

    Sager, Garrett L.; Roberts, Ron; Mallon, Bob; Alameri, Mohamed; Steinbach, Bill


    The provisions of this project call for the design of the structure of the wing and carry-through structure for the Viper primary trainer, which is to be certified as a utility category trainer under FAR part 23. The specific items to be designed in this statement of work were Front Spar, Rear Spar, Aileron Structure, Wing Skin, and Fuselage Carry-through Structure. In the design of these parts, provisions for the fuel system, electrical system, and control routing were required. Also, the total weight of the entire wing planform could not exceed 216 lbs. Since this aircraft is to be used as a primary trainer, and the SOW requires a useful life of 107 cycles, it was decided that all of the principle stresses in the structural members would be kept below 10 ksi. The only drawback to this approach is a weight penalty.

  2. Turboprop aircraft against terrorism: a SWOT analysis of turboprop aircraft in CAS operations

    Yavuz, Murat; Akkas, Ali; Aslan, Yavuz


    Today, the threat perception is changing. Not only for countries but also for defence organisations like NATO, new threat perception is pointing terrorism. Many countries' air forces become responsible of fighting against terorism or Counter-Insurgency (COIN) Operations. Different from conventional warfare, alternative weapon or weapon systems are required for such operatioins. In counter-terrorism operations modern fighter jets are used as well as helicopters, subsonic jets, Unmanned Aircraft Systems (UAS), turboprop aircraft, baloons and similar platforms. Succes and efficiency of the use of these platforms can be determined by evaluating the conditions, the threats and the area together. Obviously, each platform has advantages and disadvantages for different cases. In this research, examples of turboprop aircraft usage against terrorism and with a more general approach, turboprop aircraft for Close Air Support (CAS) missions from all around the world are reviewed. In this effort, a closer look is taken at the countries using turboprop aircraft in CAS missions while observing the fields these aircraft are used in, type of operations, specifications of the aircraft, cost and the maintenance factors. Thus, an idea about the convenience of using these aircraft in such operations can be obtained. A SWOT analysis of turboprop aircraft in CAS operations is performed. This study shows that turboprop aircraft are suitable to be used in counter-terrorism and COIN operations in low threat environment and is cost benefical compared to jets.

  3. Novel methods for aircraft corrosion monitoring

    Bossi, Richard H.; Criswell, Thomas L.; Ikegami, Roy; Nelson, James; Normand, Eugene; Rutherford, Paul S.; Shrader, John E.


    Monitoring aging aircraft for hidden corrosion is a significant problem for both military and civilian aircraft. Under a Wright Laboratory sponsored program, Boeing Defense & Space Group is investigating three novel methods for detecting and monitoring hidden corrosion: (1) atmospheric neutron radiography, (2) 14 MeV neutron activation analysis and (3) fiber optic corrosion sensors. Atmospheric neutron radiography utilizes the presence of neutrons in the upper atmosphere as a source for interrogation of the aircraft structure. Passive track-etch neutron detectors, which have been previously placed on the aircraft, are evaluated during maintenance checks to assess the presence of corrosion. Neutrons generated by an accelerator are used via activation analysis to assess the presence of distinctive elements in corrosion products, particularly oxygen. By using fast (14 MeV) neutrons for the activation, portable, high intensity sources can be employed for field testing of aircraft. The third novel method uses fiber optics as part of a smart structure technology for corrosion detection and monitoring. Fiber optic corrosion sensors are placed in the aircraft at locations known to be susceptible to corrosion. Periodic monitoring of the sensors is used to alert maintenance personnel to the presence and degree of corrosion at specific locations on the aircraft. During the atmospheric neutron experimentation, we identified a fourth method referred to as secondary emission radiography (SER). This paper discusses the development of these methods.

  4. Aircraft impact on a spherical shell

    For nuclear power plants located in the immediate vicinity of cities and airports safeguarding against an accidental aircraft strike is important. Because of the complexity of such an aircraft crash the building is ordinarily designed for loading by an idealized dynamical load F(t), which follows from measurements (aircraft striking a rigid wall). The extent to which the elastic displacements of a structure influence the impact load F(t) is investigatd in this paper. The aircraft is idealized by a linear mass-spring-dashpot combination which can easily be treated in computations and which can suffer elastic as well as plastic deformations. This 'aircraft' normally strikes a spherical shell at the apex. The time-dependent reactions of the shell as a function of the unknown impact load F(t) are expanded in terms of the normal modes, which are Legendre functions. The continuity condition at the impact point leads to an integral equation for F(t) which may be solved by Laplace transformation. F(t) is computed for hemispheres with several ratios of thickness to radius, several edge conditions and several 'aircraft' parameters. In all cases F(t) differs very little from that function obtained for the case of the aircraft striking a rigid wall. (Auth.)

  5. Processing infrared images of aircraft lapjoints

    Syed, Hazari; Winfree, William P.; Cramer, K. E.


    Techniques for processing IR images of aging aircraft lapjoint data are discussed. Attention is given to a technique for detecting disbonds in aircraft lapjoints which clearly delineates the disbonded region from the bonded regions. The technique is weak on unpainted aircraft skin surfaces, but can be overridden by using a self-adhering contact sheet. Neural network analysis on raw temperature data has been shown to be an effective tool for visualization of images. Numerical simulation results show the above processing technique to be an effective tool in delineating the disbonds.

  6. Improved portable lighting for visual aircraft inspection

    Shagam, R.N. [Sandia National Lab., Albuquerque, NM (United States); Lerner, J.; Shie, R. [Physical Optics Corp., Torrance, CA (United States)


    The most common tool used by aircraft inspectors is the personal flashlight. While it is compact and very portable, it is generally typified by poor beam quality which can interfere with the ability for an inspector to detect small defects and anomalies, such as cracks and corrosion sites, which may be indicators of major structural problems. A Light Shaping Diffuser{trademark} (LSD) installed in a stock flashlight as a replacement to the lens can improve the uniformity of an average flashlight and improve the quality of the inspection. Field trials at aircraft maintenance facilities have demonstrated general acceptance of the LSD by aircraft inspection and maintenance personnel.

  7. Improved portable lighting for visual aircraft inspection

    Shagam, Richard N.; Lerner, Jeremy M.; Shie, Rick


    The most common tool used by aircraft inspectors is the personal flashlight. While it is compact and very portable, it is generally typified by poor beam quality which can interfere with the ability for an inspector to detect small defects and anomalies, such as cracks and corrosion sites, which may be indicators of major structural problems. A Light Shaping Diffuser TM (LSD) installed in a stock flashlight as a replacement to the lens can improve the uniformity of an average flashlight and improve the quality of the inspection. Field trials at aircraft maintenance facilities have demonstrated general acceptance of the LSD by aircraft inspection and maintenance personnel.

  8. Aircraft Energy Efficiency (ACEE) status report

    Nored, D. L.; Dugan, J. F., Jr.; Saunders, N. T.; Ziemianski, J. A.


    Fuel efficiency in aeronautics, for fuel conservation in general as well as for its effect on commercial aircraft operating economics is considered. Projects of the Aircraft Energy Efficiency Program related to propulsion are emphasized. These include: (1) engine component improvement, directed at performance improvement and engine diagnostics for prolonged service life; (2) energy efficient engine, directed at proving the technology base for the next generation of turbofan engines; and (3) advanced turboprop, directed at advancing the technology of turboprop powered aircraft to a point suitable for commercial airline service. Progress in these technology areas is reported.

  9. Hydrogen fueled subsonic aircraft - A prospective

    Witcofski, R. D.


    The performance characteristics of hydrogen-fueled subsonic transport aircraft are compared with those of aircraft using conventional aviation kerosene. Results of the Cryogenically Fueled Aircraft Technology Program sponsored by NASA indicate that liquid hydrogen may be particularly efficient for subsonic transport craft when ranges of 4000 km or more are involved; however, development of advanced cryogenic tanks for liquid hydrogen fuel is required. The NASA-sponsored program also found no major technical obstacles for international airports converting the liquid hydrogen fueling systems. Resource utilization efficiency and fuel production costs for hydrogen produced by coal gasification or for liquid methane or synthetic aviation kerosene are also assessed.

  10. Aircraft Loss-of-Control Accident Analysis

    Belcastro, Christine M.; Foster, John V.


    Loss of control remains one of the largest contributors to fatal aircraft accidents worldwide. Aircraft loss-of-control accidents are complex in that they can result from numerous causal and contributing factors acting alone or (more often) in combination. Hence, there is no single intervention strategy to prevent these accidents. To gain a better understanding into aircraft loss-of-control events and possible intervention strategies, this paper presents a detailed analysis of loss-of-control accident data (predominantly from Part 121), including worst case combinations of causal and contributing factors and their sequencing. Future potential risks are also considered.

  11. 32 CFR 855.15 - Detaining an aircraft.


    ... 32 National Defense 6 2010-07-01 2010-07-01 false Detaining an aircraft. 855.15 Section 855.15 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE AIRCRAFT CIVIL AIRCRAFT USE OF UNITED STATES AIR FORCE AIRFIELDS Civil Aircraft Landing Permits § 855.15 Detaining an...

  12. 42 CFR 71.44 - Disinsection of aircraft.


    ... 42 Public Health 1 2010-10-01 2010-10-01 false Disinsection of aircraft. 71.44 Section 71.44... Disinsection of aircraft. (a) The Director may require disinsection of an aircraft if it has left a foreign area that is infected with insect-borne communicable disease and the aircraft is suspected of...

  13. 9 CFR 91.41 - Cleaning and disinfecting of aircraft.


    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Cleaning and disinfecting of aircraft... INSPECTION AND HANDLING OF LIVESTOCK FOR EXPORTATION Cleaning and Disinfecting of Aircraft § 91.41 Cleaning and disinfecting of aircraft. Prior to loading of animals, the stowage area of aircraft to be used...

  14. 8 CFR 1280.21 - Seizure of aircraft.


    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Seizure of aircraft. 1280.21 Section 1280... REGULATIONS IMPOSITION AND COLLECTION OF FINES § 1280.21 Seizure of aircraft. Seizure of an aircraft under the authority of section 239 of the Act and § 1280.2 will not be made if such aircraft is damaged to an...

  15. 14 CFR 375.11 - Other foreign civil aircraft.


    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Other foreign civil aircraft. 375.11... PROCEEDINGS) SPECIAL REGULATIONS NAVIGATION OF FOREIGN CIVIL AIRCRAFT WITHIN THE UNITED STATES Authorization § 375.11 Other foreign civil aircraft. A foreign civil aircraft other than those referred to in §...

  16. 14 CFR 399.43 - Treatment of leased aircraft.


    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Treatment of leased aircraft. 399.43... Treatment of leased aircraft. In determining the appropriate treatment of leased aircraft for ratemaking... leased aircraft value (determined on a constructive depreciated basis) in relation to net book value...

  17. Impact of Advanced Propeller Technology on Aircraft/Mission Characteristics of Several General Aviation Aircraft

    Keiter, I. D.


    Studies of several General Aviation aircraft indicated that the application of advanced technologies to General Aviation propellers can reduce fuel consumption in future aircraft by a significant amount. Propeller blade weight reductions achieved through the use of composites, propeller efficiency and noise improvements achieved through the use of advanced concepts and improved propeller analytical design methods result in aircraft with lower operating cost, acquisition cost and gross weight.

  18. Aircraft Nodal Data Acquisition System (ANDAS) Project

    National Aeronautics and Space Administration — Development of an Aircraft Nodal Data Acquisition System (ANDAS) is proposed. The proposed methodology employs the development of a very thin (135m) hybrid...

  19. Smart structure application for the Challenger aircraft

    Grenier, L.; Blaha, Franz A.


    The Challenger aircraft fleet of the Canadian Forces will fly demanding missions, requiring the implementation of a fatigue management program based on the monitoring of in-flight aircraft load conditions. Conventional sensing techniques experience problems arising from severe electromagnetic interference (EMI). This paper describes the development of an EMI- insensitive smart-structure sensing concept for loads monitoring. Fiber-optic strain sensors, incorporated at critical structural locations, are used to monitor the fatigue life of the aircraft wing, fuselage, and empennage. A fiber-optic accelerometer is also incorporated in the system. A long-term plan is presented for the development of an advanced smart-structure concept which can support the continuous monitoring of fatigue-prone components, and provide the aircraft with near real-time damage location and assessment.

  20. Aircraft Nodal Data Acquisition System (ANDAS) Project

    National Aeronautics and Space Administration — Development of an Aircraft Nodal Data Acquisition System (ANDAS) based upon the short haul Zigbee networking standard is proposed. It employs a very thin (135 um)...

  1. Directional monitoring terminal for aircraft noise

    Genescà, M.


    This paper presents a concept of an aircraft noise monitoring terminal (NMT) that reduces background noise and the influence of ground reflection, in comparison with a single microphone. Also, it automatically identifies aircraft sound events based on the direction of arrival of the sound rather than on the sound pressure level (or radar data). And moreover, it provides an indicator of the quality of the sound pressure level measurement, i.e. if it is possibly disturbed by extraneous sources. The performance of this NMT is experimentally tested under real conditions in a measurement site close to Zurich airport. The results show that the NMT unambiguously identifies the noise events generated by the target aircraft, correctly detects those aircraft noise events that may be disturbed by the presence of other sources, and offers a substantial reduction in background and ground reflected sound.

  2. The drive for Aircraft Energy Efficiency

    James, R. L., Jr.; Maddalon, D. V.


    NASA's Aircraft Energy Efficiency (ACEE) program, which began in 1976, has mounted a development effort in four major transport aircraft technology fields: laminar flow systems, advanced aerodynamics, flight controls, and composite structures. ACEE has explored two basic methods for achieving drag-reducing boundary layer laminarization: the use of suction through the wing structure (via slots or perforations) to remove boundary layer turbulence, and the encouragement of natural laminar flow maintenance through refined design practices. Wind tunnel tests have been conducted for wide bodied aircraft equipped with high aspect ratio supercritical wings and winglets. Maneuver load control and pitch-active stability augmentation control systems reduce fuel consumption by reducing the drag associated with high aircraft stability margins. Composite structures yield lighter airframes that in turn call for smaller wing and empennage areas, reducing induced drag for a given payload. In combination, all four areas of development are expected to yield a fuel consumption reduction of 40 percent.

  3. Engineering students win NASA aircraft design competition

    Crumbley, Liz


    Centuria," a single-engine jet aircraft designed by undergraduate engineering students from Virginia Tech and their counterparts at Loughborough University in the U.K., has won the Best Overall Award in NASA's 2004 Revolutionary Vehicles and Concepts Competition.

  4. Aircraft Trajectory Optimization Using Parametric Optimization Theory

    Valenzuela Romero, Alfonso


    In this thesis, a study of the optimization of aircraft trajectories using parametric optimization theory is presented. To that end, an approach based on the use of predefined trajectory patterns and parametric optimization is proposed. The trajectory pat

  5. Emerging nondestructive inspection methods for aging aircraft

    Beattie, A; Dahlke, L; Gieske, J [and others


    This report identifies and describes emerging nondestructive inspection (NDI) methods that can potentially be used to inspect commercial transport and commuter aircraft for structural damage. The nine categories of emerging NDI techniques are: acoustic emission, x-ray computed tomography, backscatter radiation, reverse geometry x-ray, advanced electromagnetics, including magnetooptic imaging and advanced eddy current techniques, coherent optics, advanced ultrasonics, advanced visual, and infrared thermography. The physical principles, generalized performance characteristics, and typical applications associated with each method are described. In addition, aircraft inspection applications are discussed along with the associated technical considerations. Finally, the status of each technique is presented, with a discussion on when it may be available for use in actual aircraft maintenance programs. It should be noted that this is a companion document to DOT/FAA/CT-91/5, Current Nondestructive Inspection Methods for Aging Aircraft.

  6. Thermal Management System for Superconducting Aircraft Project

    National Aeronautics and Space Administration — Aircraft powered by hydrogen power plants or gas turbines driving electric generators connected to distributed electric motors for propulsion have the potential to...

  7. Design of heavy lift cargo aircraft

    National Aeronautics and Space Administration — This is the bird of the skies of the future. The heavy lift cargo aircraft which is currently being developed by me has twice the payload capacity of an Antonov...

  8. Engine selection for transport and combat aircraft.

    Dugan, J. F., Jr.


    Review of the procedures used to select engines for transport and combat aircraft by illustrating the procedures for a long haul CTOL transport, a short haul VTOL transport, a long range SST, and a fighter aircraft. For the CTOL transport, it is shown that advances in noise technology and advanced turbine cooling technology will greatly reduce the airplane performance penalties associated with achieving low noise goals. A remote lift fan powered by a turbofan air generator is considered for the VTOL aircraft. In this case, the lift fan pressure ratio which maximizes payload also comes closest to meeting the noise goal. High turbine temperature in three different engines is considered for the SST. Without noise constraints it leads to an appreciable drop in DOC, but with noise constraints the reduction in DOC is very modest. For the fighter aircraft it is shown how specific excess power requirements play the same role in engine selection as noise constraints for commercial airplanes.

  9. Analysis of Aircraft Crash Accident for WETF

    This report applies the methodology of DOE-STD-3014-96, ''Accident Analysis for Aircraft Crash into Hazardous Facilities'', to the Weapons Engineering Tritium Facility (WETF) at LANL. Straightforward application of that methodology shows that including local helicopter flights with those of all other aircraft with potential to impact the facility poses a facility impact risk slightly in excess of the DOE standard's threshold--10-6 impacts per year. It is also shown that helicopters can penetrate the facility if their engines impact that facility's roof. However, a refinement of the helicopter impact analysis shows that penetration risk of the facility for all aircraft lies below the DOE standard's threshold. By that standard, therefore, the potential for release of hazardous material from the facility as a result of an aircraft crashing into the facility is negligible and need not be analyzed further

  10. Modular Electric Propulsion Test Bed Aircraft Project

    National Aeronautics and Space Administration — A hybrid electric aircraft simulation system and test bed is proposed to provide a dedicated development environment for the rigorous study and advancement of...

  11. Modular Electric Propulsion Test Bed Aircraft Project

    National Aeronautics and Space Administration — An all electric aircraft test bed is proposed to provide a dedicated development environment for the rigorous study and advancement of electrically powered...

  12. Technology for reducing aircraft engine pollution

    Rudey, R. A.; Kempke, E. E., Jr.


    Programs have been initiated by NASA to develop and demonstrate advanced technology for reducing aircraft gas turbine and piston engine pollutant emissions. These programs encompass engines currently in use for a wide variety of aircraft from widebody-jets to general aviation. Emission goals for these programs are consistent with the established EPA standards. Full-scale engine demonstrations of the most promising pollutant reduction techniques are planned within the next three years. Preliminary tests of advanced technology gas turbine engine combustors indicate that significant reductions in all major pollutant emissions should be attainable in present generation aircraft engines without adverse effects on fuel consumption. Fundamental-type programs are yielding results which indicate that future generation gas turbine aircraft engines may be able to utilize extremely low pollutant emission combustion systems.

  13. Tips for Travel and Aircraft Flight

    ... Knowledge and support Tips for Travel and Aircraft Flight Category: FAQ's Tags: Risks Archives Breast Cancer Survivors ... limb carefully) and apply pressure as needed. DURING FLIGHT Keep your seat belt loosely fastened so that ...

  14. Cooling system for high speed aircraft

    Lawing, P. L.; Pagel, L. L. (Inventor)


    The system eliminates the necessity of shielding an aircraft airframe constructed of material such as aluminum. Cooling is accomplished by passing a coolant through the aircraft airframe, the coolant acting as a carrier to remove heat from the airframe. The coolant is circulated through a heat pump and a heat exchanger which together extract essentially all of the added heat from the coolant. The heat is transferred to the aircraft fuel system via the heat exchanger and the heat pump. The heat extracted from the coolant is utilized to power the heat pump. The heat pump has associated therewith power turbine mechanism which is also driven by the extracted heat. The power turbines are utilized to drive various aircraft subsystems, the compressor of the heat pump, and provide engine cooling.

  15. Incidence of Fungal attack on Aircraft Fuselage

    H. M. Dayal


    Full Text Available Incidence of fungal attack on the fuselage of a few Vampire aircraft has been observed. The fungus isolated from the infected regions has been tentatively indentified as TorulaSp. Laboratory experiments have revealed that within four weeks this fungus causes about 44 percent loss in the tensile strength of the brich plywood used in the manufacture of the fuselage of the aircraft.

  16. Schlieren Imaging Of An Aircraft In Flight

    Weinstein, Leonard M.


    Technique for making schlieren images of airplanes and missiles in supersonic flight devised to help understand physics of compressible aerodynamic flows about complicated aircraft shapes. Technique also used to study far-field sonic booms. Data obtained from schlieren images useful in optimizing designs of prototype aircraft. Technique incorporates elements of focusing schlieren photography, astronomical photography, and streak photography. Using sun or moon as source of light, apparatus forms image revealing gradients of density in air flow.

  17. Aircraft Noise: Annoyance, House Prices and Valuation

    Brooker, Peter


    “Nobody wants to buy your house. It’s the aircraft noise. You’ll have to reduce the price a lot.” Aircraft noise around airports causes annoyance, and tends to reduce the price of affected properties. Can annoyance be ‘costed’ by examining house price reductions? Are there other ways of valuing annoyance in monetary terms? This short paper summarises key research results and poses some questions.

  18. Research on Emerging and Descending Aircraft Noise

    Monika Bartkevičiūtė; Raimondas Grubliauskas


    Along with an increase in the aircraft engine power and growth in air traffic, noise level at airports and their surrounding environs significantly increases. Aircraft noise is high level noise spreading within large radius and intensively irritating the human body. Air transport is one of the main sources of noise having a particularly strong negative impact on the environment. The article deals with activities and noises taking place in the largest nationwide Vilnius International Airport.T...

  19. An Optimization Model for Aircraft Service Logistics

    Angus; Cheung; W; H; Ip; Angel; Lai; Eva; Cheung


    Scheduling is one of the most difficult issues in t he planning and operations of the aircraft services industry. In this paper, t he various scheduling problems in ground support operation of an aircraft mainte nance service company are addressed. The authors developed a set of vehicle rout ings to cover each schedule flights; the objectives pursued are the maximization of vehicle and manpower utilization and minimization of operation time. To obta in the goals, an integer-programming model with geneti...

  20. Anti-aircraft Missiles and Gun Control

    BLOCK, Walter


    Abstract. Gun control is a highly debatable topic both in the popular and scholarly media. But what about anti-aircraft missiles? Should they be banned? On the one hand, there are fewer of them around, so their challenge is more tractable. On the other hand, they can do far more damage than handguns. The present paper is an attempt to wrestle with this challenge.Keywords. Gun control, Second amendment, Libertarianism, Anti-aircraft missiles.JEL. K15.

  1. Aircraft Wake Vortex Evolution and Prediction

    Holzäpfel, Frank


    Aircraft trailing vortices constitute both a kaleidoscope of instructive fluid dynamics phenomena and a challenge for the sustained development of safety and capacity of the air-transportation industry. The current manuscript gives an overview on the wake vortex issue which commences at its historical roots and concludes with the current status of knowledge regarding the nature and characteristics, and the modeling of aircraft wakes. The incentive of today's wake vortex research still re...

  2. Aging aircraft wiring: a proactive management methodology

    Tambouratzis, Vasileios.


    During the last years, military budgets have been dramatically reduced and the services have been unable to acquire sufficient new systems. Military aviation is one of the areas that have been severely impacted. The result is that the current fleet faces significant aging aircraft problems. Aircraft wiring is one of the areas that have severely affected by the aging process. Recent accidents involving aging wiring problems and reduced operational readiness due to aging wiring have made clear ...

  3. Crashworthiness of composite seats for civil aircraft

    Stephens, V. M.


    A study has been conducted into the design of civil aircraft seats which are forward-facing and use the lap-belt method of restraint. Within these terms of reference, the response of the seat restraint occupant system (SROS) to impact loading has been analysed using physical (dynamic testing) and analytical (computer simulation) modelling techniques. With the increasing use of fibre-reinforced polymer composites in aircraft for weight efficiency, and the consequent appearance of composite se...

  4. Computer Aided Visual Inspection of Aircraft Surfaces

    Rafia Mumtaz; Mustafa Mumtaz; Atif Bin Mansoor; Hassan Masood


    Non Destructive Inspections (NDI) plays a vital role in aircraft industry as it determines the structural integrity of aircraft surface and material characterization. The existing NDI methods are time consuming, we propose a new NDI approach using Digital Image Processing that has the potential to substantially decrease the inspection time. Automatic Marking of cracks have been achieved through application of Thresholding, Gabor Filter and Non Subsampled Contourlet transform. For a novel meth...

  5. Maintenance program developmentandImport /Export of Aircraft in USA

    Takele, Teklu


    AbstractThis thesis discuss how United Parcel Service (UPS) develop its aircraft maintenanceprogram after import of McDonnell Douglas MD-11aircraft and the process of exporting newMD-11 aircraft from manufacturer in USA to European operator as passenger aircraft. It alsodiscusses the process of importing the same types of aircraft as freight carrier. The aircraftundergo, through different modifications at Singapore Technologies Aerospace (STA)conversion from passenger to freight carrier, a pr...

  6. Aircraft Noise and Quality of Life around Frankfurt Airport

    Thomas Eikmann; Christin Peschel; Cara Kahl; Dirk Schreckenberg; Markus Meis


    In a survey of 2,312 residents living near Frankfurt Airport aircraft noise annoyance and disturbances as well as environmental (EQoL) and health-related quality of life (HQoL) were assessed and compared with data on exposure due to aircraft, road traffic, and railway noise. Results indicate higher noise annoyance than predicted from general exposure-response curves. Beside aircraft sound levels source-related attitudes were associated with reactions to aircraft noise. Furthermore, aircraft n...

  7. Predictive Health Monitoring for Aircraft Systems using Decision Trees

    Gerdes, Mike


    Unscheduled aircraft maintenance causes a lot problems and costs for aircraft operators. This is due to the fact that aircraft cause significant costs if flights have to be delayed or canceled and because spares are not always available at any place and sometimes have to be shipped across the world. Reducing the number of unscheduled maintenance is thus a great costs factor for aircraft operators. This thesis describes three methods for aircraft health monitoring and prediction; one method fo...

  8. High altitude aircraft flight tests

    Helmken, Henry; Emmons, Peter; Homeyer, David


    In order to make low earth orbit L-band propagation measurements and test new voice communication concepts, a payload was proposed and accepted for flight aboard the COMET (now METEOR) spacecraft. This Low Earth Orbiting EXperiment payload (LEOEX) was designed and developed by Motorola Inc. and sponsored by the Space Communications Technology Center (SCTC), a NASA Center for the Commercial Development of Space (CCDS) located at Florida Atlantic University. In order to verify the LEOEX payload for satellite operation and obtain some preliminary propagation data, a series of 9 high altitude aircraft (SR-71 and ER-2) flight tests were conducted. These flights took place during a period of 7 months, from October 1993 to April 1994. This paper will summarize the operation of the LEOEX payload and the particular configuration used for these flights. The series of flyby tests were very successful and demonstrated how bi-directional, Time Division Multiple Access (TDMA) voice communication will work in space-to-ground L-band channels. The flight tests also acquired propagation data which will be representative of L-band Low Earth Orbiting (LEO) communication systems. In addition to verifying the LEOEX system operation, it also uncovered and ultimately aided the resolution of several key technical issues associated with the payload.

  9. Intelligent control of agile aircraft

    Mohler, R.R.; Zakrzewski, R.R. [Dept. of Electrical and Computer Engineering, Corvallis, OR (United States)


    A brief overview of adaptive and computer-aided flight control is presented as background for the evolution of recent research on nonlinear intelligent control. Here, several nonlinear control algorithms are investigated but emphasis is given to nearly time-optimal, neural-net generated feedback control which is trained on ideal minimum-time, open-loop trajectories. The minimum-time policies are computed by a new version of the switching-line-variational method (gradient algorithm). Critical control constraints and a benchmark for performance as well as a basis for training are obtained for the system design. This further demonstrates the need for an integrated controls and aircraft system design for full utilization of nonlinear control capability. Complex nonlinear simulations show the effectiveness of the derived nonlinear feedback controller for the high-angle-of-attack research vehicle (HARV) with stabilator and thrust-vector control. For example, angle of attack is controlled from near zero to sixty degrees in about two seconds with appropriate trim conditions at both ends. Such control greatly enhances maneuverability and general flight envelope admissibility.

  10. Beamforming for aircraft noise measurements

    Dougherty, Robert P.


    Phased array beamforming for aircraft noise source location has a long history, including early work on jet noise, wind tunnel measurements, and flyover testing. In the last 10 years, advancements in sparse 2-D and 3-D arrays, wind tunnel test techniques, and computer power have made phased array measurements almost common. Large aerospace companies and national research institutes have an advantage in access to major facilities and hundreds of measurement microphones, but universities and even consulting companies can perform tests with electret microphones and PC data acquisition systems. The type of testing remains a blend of science and art. A complex noise source is approximated by a mathematical model, and the microphones are deployed to evaluate the parameters of the model. For example, the simplest, but often the best, approach is to assume a distribution of mutually incoherent monopoles. This leads to an imaging process analogous to photography. Other models include coherent distributions of multipoles or duct modes. It is sometimes important to simulate the results that would have been obtained from single microphone measurements of part of the airplane in an ideal environment, had such measurements been feasible.

  11. 41 CFR 102-33.90 - What is the process for budgeting to acquire a Federal aircraft (including a Federal aircraft...


    ... AIRCRAFT Acquiring Government Aircraft and Aircraft Parts The Process for Budgeting to Acquire Government Aircraft § 102-33.90 What is the process for budgeting to acquire a Federal aircraft (including a Federal aircraft transferred from another executive agency)? (a) The process for budgeting to acquire a...

  12. Common factors in the withdrawal of European aircraft manufacturers from the regional aircraft market

    Heerkens, Hans; Bruijn, de Erik J.; Steenhuis, Harm-Jan


    We investigate whether there were common causes for the withdrawal from the regional aircraft market of three established manufacturers (BAE Systems, Fokker and Saab), while competitors thrived. We focus on the markets for 50- and 100-seat aircraft. One cause concerning the 50-seat market was the in

  13. Conceptual design of high speed supersonic aircraft: A brief review on SR-71 (Blackbird) aircraft

    Xue, Hui; Khawaja, H.; Moatamedi, M.


    The paper presents the conceptual design of high-speed supersonic aircraft. The study focuses on SR-71 (Blackbird) aircraft. The input to the conceptual design is a mission profile. Mission profile is a flight profile of the aircraft defined by the customer. This paper gives the SR-71 aircraft mission profile specified by US air force. Mission profile helps in defining the attributes the aircraft such as wing profile, vertical tail configuration, propulsion system, etc. Wing profile and vertical tail configurations have direct impact on lift, drag, stability, performance and maneuverability of the aircraft. A propulsion system directly influences the performance of the aircraft. By combining the wing profile and the propulsion system, two important parameters, known as wing loading and thrust to weight ratio can be calculated. In this work, conceptual design procedure given by D. P. Raymer (AIAA Educational Series) is applied to calculate wing loading and thrust to weight ratio. The calculated values are compared against the actual values of the SR-71 aircraft. Results indicates that the values are in agreement with the trend of developments in aviation.

  14. 78 FR 65554 - Exhaust Emission Standards for New Aircraft Turbine Engines and Identification Plate for Aircraft...


    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Parts 34 and 45 RIN 2120-AK15 Exhaust Emission Standards for New Aircraft Turbine Engines and Identification Plate for Aircraft Engines Correction In rule document...

  15. Improving Aircraft Design Robustness with Scenario Methods

    A. Strohmayer


    Full Text Available Compared to other industries, the aerospace sector is characterized by long product cycles in a very complex environment. The aircraft manufacturer has to base his product strategy on a long-term view of risks and opportunities in the transport industry but he cannot predict the development of relevant factors in this market environment with any certainty. In this situation, scenario methods offer a pragmatic way to limit the uncertainties and to work them up methodically, in order to derive recommendations for cost-intensive strategic decisions like for example the go-ahead for a new aircraft concept. By including scenario methods in the aircraft design cycle, the ‘design robustness’ can be improved, i.e. the design is not optimised for a prognosticated operating environment, but can cope with various possible future developments. The paper will explain the three fundamental aspects in applying scenario planning to the aircraft design process: requirement definition, design evaluation and technology identification. For each aspect, methods will be shown, which connect the rather qualitative results of a scenario process with aircraft design, which typically demands a qualitative input.

  16. Control strategies for aircraft airframe noise reduction

    Li Yong; Wang Xunnian; Zhang Dejiu


    With the development of low-noise aircraft engine,airframe noise now represents a major noise source during the commercial aircraft's approach to landing phase.Noise control efforts have therefore been extensively focused on the airframe noise problems in order to further reduce aircraft overall noise.In this review,various control methods explored in the last decades for noise reduction on airframe components including high-lift devices and landing gears are summarized.We introduce recent major achievements in airframe noise reduction with passive control methods such as fairings,deceleration plates,splitter plates,acoustic liners,slat cove cover and side-edge replacements,and then discuss the potential and control mechanism of some promising active flow control strategies for airframe noise reduction,such as plasma technique and air blowing/suction devices.Based on the knowledge gained throughout the extensively noise control testing,a few design concepts on the landing gear,high-lift devices and whole aircraft are provided for advanced aircraft low-noise design.Finally,discussions and suggestions are given for future research on airframe noise reduction.

  17. Aircraft impact analysis for the HFBR

    This report presents an analysis performed to determine the annual frequency at which aircraft are expected to strike the High Flux Beam Reactor (HFBR) complex, located at Brookhaven National Laboratory. Since the HFBR is not hardened against light aircraft, this report considers the impact of military, commercial, twin engine and single engine aircraft operating in the vicinity of the HFBR. The large volume of light aircraft operating in this area contributes heavily to the estimated annual impact frequency of 3.54E-05 impacts per year. There are two chapters and seven appendices in this report. The first chapter describes the airspace in the vicinity of the HFBR. This includes five airports, two major airways, one standard arrival route, as well as a significant volume of radar vectored and air-taxi traffic. The second chapter of this report presents the calculations by which the expected impact frequency was derived, and an assessment of the uncertainty in those calculations. The calculations were performed using the method outlined in the NRC Standard Review Plan. A separate set of calculations is presented for each of three sources of aircraft: airway traffic, Brookhaven Airport, and Calverton Airport. The appendices contain discussions and side calculations ancillary to the presentation in the second section. This includes a discussion of the data used to estimate traffic counts, information on accident rates, and several other points which would have only been distracting if included in the main discussion

  18. Design of a spanloader cargo aircraft


    With a growing demand for fast international freight service, the slow-moving cargo ships currently in use will soon find a substantial portion of their clients looking elsewhere. One candidate for filling this expected gap in the freight market is a span-loading aircraft (or 'flying wing') capable of long-range operation with extremely large payloads. This report summarizes the design features of an aircraft capable of fulfilling a long-haul, high-capacity cargo mission. The spanloader seeks to gain advantage over conventional aircraft by eliminating the aircraft fuselage and thus reducing empty weight. The primary disadvantage of this configuration is that the cargo-containing wing tends to be thick, thus posing a challenge to the airfoil designer. It also suffers from stability and control problems not encountered by conventional aircraft. The result is an interesting, challenging exercise in unconventional design. The report that follows is a student written synopsis of an effort judged to be the best of eight designs developed during the year 1988-1989.

  19. Small Autonomous Aircraft Servo Health Monitoring

    Quintero, Steven


    Small air vehicles offer challenging power, weight, and volume constraints when considering implementation of system health monitoring technologies. In order to develop a testbed for monitoring the health and integrity of control surface servos and linkages, the Autonomous Aircraft Servo Health Monitoring system has been designed for small Uninhabited Aerial Vehicle (UAV) platforms to detect problematic behavior from servos and the air craft structures they control, This system will serve to verify the structural integrity of an aircraft's servos and linkages and thereby, through early detection of a problematic situation, minimize the chances of an aircraft accident. Embry-Riddle Aeronautical University's rotary-winged UAV has an Airborne Power management unit that is responsible for regulating, distributing, and monitoring the power supplied to the UAV's avionics. The current sensing technology utilized by the Airborne Power Management system is also the basis for the Servo Health system. The Servo Health system measures the current draw of the servos while the servos are in Motion in order to quantify the servo health. During a preflight check, deviations from a known baseline behavior can be logged and their causes found upon closer inspection of the aircraft. The erratic behavior nay include binding as a result of dirt buildup or backlash caused by looseness in the mechanical linkages. Moreover, the Servo Health system will allow elusive problems to be identified and preventative measures taken to avoid unnecessary hazardous conditions in small autonomous aircraft.

  20. Aircraft Combat Survivability Estimation and Synthetic Tradeoff Methods

    LI Shu-lin; LI Shou-an; LI Wei-ji; LI Dong-xia; FENG Feng


    A new concept is proposed that susceptibility, vulnerability, reliability, maintainability and supportability should be essential factors of aircraft combat survivability. A weight coefficient method and a synthetic method are proposed to estimate aircraft combat survivability based on the essential factors. Considering that it takes cost to enhance aircraft combat survivability, a synthetic tradeoff model between aircraft combat survivability and life cycle cost is built. The aircraft combat survivability estimation methods and synthetic tradeoff with a life cycle cost model will be helpful for aircraft combat survivability design and enhancement.

  1. Improvements in Aircraft Gas Turbine Engines for the 90s

    Arun Prasad


    Full Text Available The gas turbine propulsion system has been playing the most significant role in the evolution and development of present-day aircraft, and has become the limiting technology for developing most new aircraft. However, the jet engine still remains the preferred propulsion choice. Aircraft gas turbines in one form or the other, viz. turbojet, turbofan, turboprop or turboshaft, have been used in commercial passenger aircraft, high performance military aircraft and in rotary wing aircraft (helicopters. The emphasis in engine development programmes world over seems to be in reducing fuel consumption, increasing thrust and in reducing weight.

  2. Aircraft System Design and Integration

    D. P. Coldbeck


    Full Text Available In the 1980's the British aircraft industry changed its approach to the management of projects from a system where a project office would manage a project and rely on a series of specialist departments to support them to a more process oriented method, using systems engineering models, whose most outwardly visible signs were the introduction of multidisciplinary product teams. One of the problems with the old method was that the individual departments often had different priorities and projects would get uneven support. The change in the system was only made possible for complex designs by the electronic distribution of data giving instantaneous access to all involved in the project. In 1997 the Defence and Aerospace Foresight Panel emphasised the need for a system engineering approach if British industry was to remain competitive. The Royal Academy of Engineering recognised that the change in working practices also changed what was required of a chartered engineer and redefined their requirements in 1997 [1]. The result of this is that engineering degree courses are now judged against new criteria with more emphasis placed on the relevance to industry rather than on purely academic content. At the University of Glasgow it was realized that the students ought to be made aware of current working practices and that there ought to be a review to ensure that the degrees give students the skills required by industry. It was decided to produce a one week introduction course in systems engineering for Masters of Engineering (MEng students to be taught by both university lecturers and practitioners from a range of companies in the aerospace industry with the hope of expanding the course into a module. The reaction of the students was favourable in terms of the content but it seems ironic that the main criticism was that there was not enough discussion involving the students. This paper briefly describes the individual teaching modules and discusses the

  3. Review of Idealized Aircraft Wake Vortex Models

    Ahmad, Nashat N.; Proctor, Fred H.; Duparcmeur, Fanny M. Limon; Jacob, Don


    Properties of three aircraft wake vortex models, Lamb-Oseen, Burnham-Hallock, and Proctor are reviewed. These idealized models are often used to initialize the aircraft wake vortex pair in large eddy simulations and in wake encounter hazard models, as well as to define matched filters for processing lidar observations of aircraft wake vortices. Basic parameters for each vortex model, such as peak tangential velocity and circulation strength as a function of vortex core radius size, are examined. The models are also compared using different vortex characterizations, such as the vorticity magnitude. Results of Euler and large eddy simulations are presented. The application of vortex models in the postprocessing of lidar observations is discussed.

  4. Requirements for the protection against aircraft noise.

    Wende, H; Ortscheid, J


    In preparation of the revised edition of the Air Traffic Noise Act the Federal Environmental Agency formulated targets for aircraft noise control. They were prepared oriented to the Federal Immission Control Act. The assessment periods were chosen analogously to the regulations on other traffic noise sources (rail traffic, road traffic). The control targets cover the following affected areas * aural, extra-aural health * night's sleep * annoyance * communication * recreation Considerable nuisance can be avoided by limiting the exposure to aircraft noise(outside) to equivalent levels below 55 dB(A) by day and 45 dB(A) at night, and impairment of health can be avoided by limiting the exposure to aircraft noise (outside) to equivalent levels below 60 dB(A) by day and 50 dB(A) at night. PMID:15703137

  5. Aircraft induced contrail cirrus over Europe

    Mannstein, H.; Schumann, U. [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Inst. fuer Physik der Atmosphaere, Oberpfaffenhofen (Germany)


    Condensation trails (contrails) and aircraft induced cirrus are nowadays a common feature at the mid latitude skies. Previously the impact of aircraft induced cirrus changes has been roughly estimated from observed decadal trends in cirrus cover but the direct attribution of observed cirrus changes to changes in aviation activity remains uncertain. In this paper the amount of additional cirrus induced from spreading contrails in humid air is estimated from the direct correlation between observed cirrus cover derived with suitable methods from METEOSAT data and aviation flight density reported by EUROCONTROL at high spatial and temporal resolution from June 22 to July 27, 1998 and September 27 to October 21, 2000. The results indicate that the aircraft induced cirrus cover over Europe is about ten times larger than that of linear contrails in the same region. Radiative forcing from the additional cirrus may be more than 10 times higher than that of linear contrails and aviation induced CO{sub 2} increases. (orig.)

  6. Robotic aircraft scanner for neutron radiographic inspection

    A robotic positioner and manipulator, a key component of a mobile neutron radiography system (MNRS) for aircraft inspection, is described. The MNRS is designed to inspect military aircraft for hidden corrosion in aluminum structures. The MNRS is comprised of an accelerator-based (Kaman A-711 sealed tube neutron generator using the deuterium-tritium reaction) thermal neutron source, electronic neutron imaging system, robotic positioner and manipulator for the source/imager, control trailer housing system control electronics and digital image processing system, mobile dark room for film processing, self-contained electrical power source, and radiation safety system. For in situ aircraft inspection, the robotic scanner is programmed (in a teach/learn mode) to scan a region of the components (e.g., wings, stabilizers, etc.) using a control pendant

  7. ANASE: measuring aircraft noise annoyance very unreliably.

    Brooker, Peter


    Does anyone who lives under a flight-path like aircraft noise? It is a political hot potato as well as a peace-destroyer. Tens of thousands of people will hear the noise from any third runway at Heathrow. So, when a study commissioned by the government claimed that people are becoming less tolerant of aircraft noise, it made highly unpleasant reading for supporters of a third runway. But the Department for Transport rejected the report as unreliable. Peter Brooker senses the vibrations.

  8. Aerodynamics/ACEE: Aircraft energy efficiency


    An overview is presented of a 10 year program managed by NASA which seeks to make possible the most efficient use of energy for aircraft propulsion and lift as well as provide a technology that can be used by U.S. manufacturers of air transports and engines. Supercritical wings, winglets, vortex drag reduction, high lift, active control, laminar flow control, and aerodynamics by computer are among the topics discussed. Wind tunnel models in flight verification of advanced technology, and the design, construction and testing of various aircraft structures are also described.

  9. Titanium alloys Russian aircraft and aerospace applications

    Moiseyev, Valentin N


    This text offers previously elusive information on state-of-the-art Russian metallurgic technology of titanium alloys. It details their physical, mechanical, and technological properties, as well as treatments and applications in various branches of modern industry, particularly aircraft and aerospace construction. Titanium Alloys: Russian Aircraft and Aerospace Applications addresses all facets of titanium alloys in aerospace and aviation technology, including specific applications, fundamentals, composition, and properties of commercial alloys. It is useful for all students and researchers interested in the investigation and applications of titanium.

  10. Aircraft concepts for service to small communities

    Galloway, T. L.


    Small communities are served by trunk, local-service, and commuter carriers having a wide variety in route structure, type of service, and economic character, operating over stage lengths less than 400 statute miles. NASA studies have investigated various aircraft concepts for short-haul that have potential in this market area. Aircraft concepts for this market require a careful balancing of performance, technology, and design-to-cost considerations. This paper summarizes some results of recent NASA sponsored air transportation system studies applicable to small community arenas.

  11. A strategic planning methodology for aircraft redesign

    Romli, Fairuz Izzuddin

    Due to a progressive market shift to a customer-driven environment, the influence of engineering changes on the product's market success is becoming more prominent. This situation affects many long lead-time product industries including aircraft manufacturing. Derivative development has been the key strategy for many aircraft manufacturers to survive the competitive market and this trend is expected to continue in the future. Within this environment of design adaptation and variation, the main market advantages are often gained by the fastest aircraft manufacturers to develop and produce their range of market offerings without any costly mistakes. This realization creates an emphasis on the efficiency of the redesign process, particularly on the handling of engineering changes. However, most activities involved in the redesign process are supported either inefficiently or not at all by the current design methods and tools, primarily because they have been mostly developed to improve original product development. In view of this, the main goal of this research is to propose an aircraft redesign methodology that will act as a decision-making aid for aircraft designers in the change implementation planning of derivative developments. The proposed method, known as Strategic Planning of Engineering Changes (SPEC), combines the key elements of the product redesign planning and change management processes. Its application is aimed at reducing the redesign risks of derivative aircraft development, improving the detection of possible change effects propagation, increasing the efficiency of the change implementation planning and also reducing the costs and the time delays due to the redesign process. To address these challenges, four research areas have been identified: baseline assessment, change propagation prediction, change impact analysis and change implementation planning. Based on the established requirements for the redesign planning process, several methods and

  12. Modelling Lightning Initiation and Attachment to Aircraft

    We present initial calculations of the formation of streamers on an aircraft. A two-dimensional model has been used to determine electric field strengths and charge densities around solids of various geometries and electrical conductivities. The calculations take into account the distortion of the background electric fields by the solid material and the production and motion of charged species. Detailed time-dependent visualizations of the streamer initiation and propagation are presented. The effects of size and aspect ratio of the gross features of the aircraft on the development of the streamers is discussed

  13. Ageing aircraft research in the Netherlands

    Dejonge, J. B.; Bartelds, G.


    The problems of aging aircraft are worldwide. Hence, international cooperative actions to overcome or prevent problems should be taken. The Federal Aviation Administration (FAA) and the Netherlands Civil Aviation Department (RLD) signed a Memorandum of Cooperation in the area of structural integrity, with specific reference to research on problems in the area of aging aircraft. Here, an overview is given of aging research that is going on in the Netherlands. The work described is done largely at the National Aerospace Laboratory; much of the research is part of the forementioned cooperative agreement.

  14. Conversion of the dual training aircraft (DC into single control advanced training aircraft (SC. Part I



    Full Text Available Converting the DC school jet aircraft into SC advanced training aircraft - and use them forthe combat training of military pilots from the operational units, has become a necessity due to thebudget cuts for Air Force, with direct implications on reducing the number of hours of flight assignedto operating personnel for preparing and training.The purpose of adopting such a program is to reduce the number of flight hours allocated annuallyfor preparing and training in advanced stages of instruction, for every pilot, by more intensive use ofthis type of aircraft, which has the advantage of lower flight hour costs as compared to a supersoniccombat plane.

  15. The contribution of aircraft emissions to the atmospheric sulfur budget

    Kjellstroem, E. [Stockholm Univ. (Sweden). Dept. of Meteorology; Feichter, J. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany); Sausen, R.; Hein, R. [Deutsches Zentrum fuer Luft- und Raumfahrt (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere


    An atmospheric general circulation model including the atmospheric sulfur cycle has been used to investigate the impact of aircraft sulfur emissions on the global sulfur budget of the atmosphere. The relative contribution from aircraft sulfur to the atmospheric sulfate burden is larger than the ratio between aircraft emissions and surface emissions due to the calculated long turn-over time of aircraft sulfate (about 12 days). However, in terms of the sulfate mass balance, aircraft emissions are small, contributing about 1% of the total sulfate mass north of 40 deg C where the aircraft emissions are largest. Despite this small contribution to sulfate mass, the aircraft emissions could potentially significantly enhance the background number concentration of aerosol particles. Based on the model calculations the increased stratospheric background aerosol mass observed during the last decades can not be explained by increased aircraft sulfur emissions 50 refs, 9 figs, 4 tabs

  16. Distributed Data Mining for Aircraft Health Management Project

    National Aeronautics and Space Administration — NASA, DoD, and commercial aircraft operators need to transform vast amounts of aircraft data accumulated in distributed databases into actionable knowledge. We...

  17. A Turbo-Brayton Cryocooler for Aircraft Superconducting Systems Project

    National Aeronautics and Space Administration — Hybrid turbo-electric aircraft with gas turbines driving electric generators connected to electric propulsion motors have the potential to transform the aircraft...

  18. Practical Voice Recognition for the Aircraft Cockpit Project

    National Aeronautics and Space Administration — This proposal responds to the urgent need for improved pilot interfaces in the modern aircraft cockpit. Recent advances in aircraft equipment bring tremendous...

  19. Fault Tolerance, Diagnostics, and Prognostics in Aircraft Flight

    National Aeronautics and Space Administration — Abstract In modern fighter aircraft with statically unstable airframe designs, the flight control system is considered flight critical, i.e. the aircraft will...

  20. Distributed Data Mining for Aircraft Health Management Project

    National Aeronautics and Space Administration — Aircraft Flight Operations Quality Assurance (FOQA) programs are implemented by most of the aircraft operators. Vast amounts of FOQA data are distributed between...


    Nilesh W. Nirwan; Dilip G. Gangwani,


    Aircraft landing gear supports the entire weight of an aircraft during landing and ground operations. They are attached to primary structural members of the aircraft. The type of gear depends on the aircraft design and its intended use. Most landing gear has wheels to facilitate operation to and from hard surfaces, such as airport runways. Other gear feature skids for this purpose, such as those found on helicopters, balloon gondolas, and in the tail area of some tail dragger airc...

  2. Flight Control Design for a Tailless Aircraft Using Eigenstructure Assignment

    Clara Nieto-Wire; Kenneth Sobel


    We apply eigenstructure assignment to the design of a flight control system for a wind tunnel model of a tailless aircraft. The aircraft, known as the innovative control effectors (ICEs) aircraft, has unconventional control surfaces plus pitch and yaw thrust vectoring. We linearize the aircraft in straight and level flight at an altitude of 15,000 feet and Mach number 0.4. Then, we separately design flight control systems for the longitudinal and lateral dynamics. We use a control allocation ...

  3. 49 CFR 172.448 - CARGO AIRCRAFT ONLY label.


    ... 49 Transportation 2 2010-10-01 2010-10-01 false CARGO AIRCRAFT ONLY label. 172.448 Section 172.448... SECURITY PLANS Labeling § 172.448 CARGO AIRCRAFT ONLY label. (a) Except for size and color, the CARGO AIRCRAFT ONLY label must be as follows: ER14JA09.001 (b) The CARGO AIRCRAFT ONLY label must be black on...

  4. Actuation technology for flight control system on civil aircraft

    Xue, L.


    This report addresses the author’s Group Design Project (GDP) and Individual Research Project (IRP). The IRP is discussed primarily herein, presenting the actuation technology for the Flight Control System (FCS) on civil aircraft. Actuation technology is one of the key technologies for next generation More Electric Aircraft (MEA) and All Electric Aircraft (AEA); it is also an important input for the preliminary design of the Flying Crane, the aircraft designed in the author’s G...

  5. 8 CFR 280.21 - Seizure of aircraft.


    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Seizure of aircraft. 280.21 Section 280.21... OF FINES § 280.21 Seizure of aircraft. Seizure of an aircraft under the authority of section 239 of the Act and § 280.2 will not be made if such aircraft is damaged to an extent that its value is...

  6. A measurement method to discriminate aircraft fly-over noise

    Genesca Francitorra, Meritxell; Romeu Garbí, Jordi; Pàmies Gómez, Teresa


    Currently aircraft noise monitoring systems use a mesh of single microphones distributed around an airport to continuously sample the noise level. This fact requires a manual process of aircraft noise event detection and classification in order to distinguish aircraft events from the rest of noise events in the recording. In the present paper a 3-meter-long 12-microphone linear array is used to automatically obtain a background noise free aircraft noise recording. The beamforming process sepa...

  7. Light shaping diffusers{trademark} improve aircraft inspection

    Shagam, R.N. [Sandia National Labs., Albuquerque, NM (United States); Shie, R.; Lerner, J. [Physical Optics Corp., Torrance, CA (United States)


    Physical Optical Corporation has introduced a Light Shaping Diffuser{trademark} (LSD) for the specialized illumination requirements of aircraft inspection. Attached to a handheld, battery-powered flashlight, this light-weight, holographic diffuser element provides bright, even illumination as aircraft inspectors perform the important task of visually examining aircraft for possible structural defects. Field trials conducted by the Aging Aircraft Program at Sandia National Laboratories confirm that the LSD-equipped flashlights are preferred by visual inspectors over stock flashlights.

  8. Corrosion Sensor Development for Condition-Based Maintenance of Aircraft

    Gino Rinaldi; Trisha Huber; Heather McIntosh; Les Lebrun; Heping Ding; John Weber


    Aircraft routinely operate in atmospheric environments that, over time, will impact their structural integrity. Material protection and selection schemes notwithstanding, recurrent exposure to chlorides, pollution, temperature gradients, and moisture provide the necessary electrochemical conditions for the development and profusion of corrosion in aircraft structures. For aircraft operators, this becomes an important safety matter as corrosion found in a given aircraft must be assumed to be p...

  9. 78 FR 12259 - Unmanned Aircraft System Test Site Program


    ... of provisions pertaining to integration of unmanned aircraft systems (UAS) into the National Airspace... Federal Aviation Administration 14 CFR Part 91 Unmanned Aircraft System Test Site Program AGENCY: Federal... be levied on the Unmanned Aircraft Systems Test Site operators, but prior to the close of the...

  10. 76 FR 45647 - Consensus Standards, Light-Sport Aircraft


    ... revision process. Background: Under the provisions of the Sport Pilot and Light-Sport Aircraft rule, 69 FR... Federal Aviation Administration Consensus Standards, Light-Sport Aircraft AGENCY: Federal Aviation... to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004,...