Una vida ligada a La Floresta

Directory of Open Access Journals (Sweden)

Kintto Lucas

2015-01-01

Full Text Available En este número, el módulo Dibujos Animados, recoge las experiencias del primer curso realizado por el CIESPAL con apoyo de la UNICEF sobre la producción de programas educativos y culturales que utilizan este recurso como una opción comunicacional. Se trata de nuevas tecnologías aprovechadas en Cuba y que pueden ser aplicadas en nuestros países. El módulo relativo al medio ambiente habla del periodismo ecológico con importante desarrollo en América Latina, tema de actualidad que requiere preocupación por parte de los medios de comunicación. Incluye entrevistas a Gunter Grass y Jesús Polanco. Gabriel Alba adentra a los lectores en una novedosa forma de usar las computadoras. En el módulo Debate se trata la Economía, cultura y comunicación; La publicidad vía televisión, La evolución del merchandising en las novelas brasileñas ¿Exigir Ética solo al periodista?

Correlação entre a Autofluorescência de Fundo e o SD-OCT na Degenerescência Macular Ligada à Idade Exsudativa

OpenAIRE

Miranda, Ana Filipa

2016-01-01

Introdução: Estudos têm mostrado que na degenerescência macular ligada à idade (DMLI) exsudativa uma maior área de alteração do epitélio pigmentar retiniano (EPR) na autofluorescência de fundo (FAF) está associada a perda da acuidade visual (AV). Não existe, no entanto, nenhum estudo realizado nestes doentes que integre as alterações verificadas na FAF com a informação anatómica da tomografia de coerência óptica spectral domain (SD-OCT). Objectivo: Investigar a correlação entre a FAF e os res...

Nucleotide variation in Sabin type 3 poliovirus from an Albanian infant with agammaglobulinemia and vaccine associated poliomyelitis.

Science.gov (United States)

Foiadelli, Thomas; Savasta, Salvatore; Battistone, Andrea; Kota, Majlinda; Passera, Carolina; Fiore, Stefano; Bino, Silvia; Amato, Concetta; Lozza, Alessandro; Marseglia, Gian Luigi; Fiore, Lucia

2016-06-10

Vaccine-associated paralytic poliomyelitis (VAPP) and immunodeficient long-term polio excretors constitute a significant public health burden and are a major concern for the WHO global polio eradication endgame. Poliovirus type 3 characterized as Sabin-like was isolated from a 5-month-old Albanian child with X-linked agammaglobulinemia and VAPP after oral polio vaccine administration. Diagnostic workup and treatment were performed in Italy. Poliovirus replicated in the gut for 7 months. The 5' non coding region (NCR), VP1, VP3 capsid proteins and the 3D polymerase genomic regions of sequential isolates were sequenced. Increasing accumulation of nucleotide mutations in the VP1 region was detected over time, reaching 1.0 % of genome variation with respect to the Sabin reference strain, which is the threshold that defines a vaccine-derived poliovirus (VDPV). We identified mutations in the 5'NCR and VP3 regions that are associated with reversion to neurovirulence. Despite this, all isolates were characterized as Sabin-like. Several amino acid mutations were identified in the VP1 region, probably involved in growth adaptation and viral persistence in the human gut. Intertypic recombination with Sabin type 2 polio in the 3D polymerase region, possibly associated with increased virus transmissibility, was found in all isolates. Gamma-globulin replacement therapy led to viral clearance and neurological improvement, preventing the occurrence of persistent immunodeficiency-related VDPV. This is the first case of VAPP in an immunodeficient child detected in Albania through the Acute Flaccid Paralysis surveillance system and the first investigated case of vaccine associated poliomyelitis in Italy since the introduction of an all-Salk schedule in 2002. We discuss over the biological and clinical implications in the context of the Global Polio Eradication Program and emphasize on the importance of the Acute Flaccid Paralysis surveillance.

Las cadenas hoteleras en el mundo y evolución de su operación en México al inicio del siglo XXI

Directory of Open Access Journals (Sweden)

Alfonso de Jesús Jiménez Martínez

2008-12-01

Full Text Available Las cadenas hoteleras internacionales desempeñan un papel relevante en el sistema turístico internacional, y cada vez hay un mayor número de cuartos asociados a cadenas hoteleras en el mundo. Las más grandes, son empresas gigantescas que actúan a nivel global y con estrategias de escala planetaria. Las cadenas tienen particularidades específicas ligadas a la condición preponderante de los países desarrollados en la economía internacional, y su presencia mundial y regional está ligada a diversos factores que inciden en su funcionamiento. Actualmente, la dinámica de las grandes corporaciones se entiende más por la rentabilidad que promete a los accionistas que por la búsqueda de satisfacción del consumidor (el turista. En este texto se busca una aproximación a la identidad y la distribución regional de las cadenas en la oferta turística mundial y sus particularidades al inicio del siglo XXI. Se describe y analiza la evolución de esas cadenas en México de acuerdo con criterios de categoría y localización.

Proteinas do liquido cefalorraqueano: III. Valores normais das imuneglobulinas G, A e M (variações ligadas a cor, sexo e idade

Directory of Open Access Journals (Sweden)

Lucia M. Singer Vermes

1983-03-01

Full Text Available É apresentada inicialmente revisão de literatura a respeito dos resultados obtidos na determinação das taxas de imuneglobulinas do LCR normal, mediante diferentes métodos, assim como da influência dos fatores cor, sexo e idade, nestes valores. Mediante imunodifusão radial foram determinados os níveis de IgG, IgA e IgM do LCR normal de 115, 78 e 45 pessoas, respectivamente. Todas as amostras de LCR foram obtidas por punção sub-occipital (LCR-SO. Os resultados destas determinações permitiram concluir que: a as taxas médias de IgG, IgA e IgM do LCR de pretos ou pardos não diferem daquelas de brancos; b não existem variações ligadas ao sexo, nem à idade, em crianças com 1 a 11 anos, nas taxas das imuneglobulinas estudadas, no LCR; c os níveis fisiológicos em crianças com 1 a 11 anos, para IgG variam entre 0,21 e 2,93 mg/100 ml; os teores absolutos médios de IgG de crianças são inferiores àqueles encontrados em adultos; os níveis percentuais médios de IgG de crianças não diferem daqueles de adultos; d as taxas de IgA do LCR de crianças, tanto em valores absolutos como relativos, são, em média, inferiores àquelas encontradas em adultos, não ultrapassando, em condições normais, 0,15 mg/100 ml (0,7% do total protéico; e em adultos, não se observam variações ligadas ao sexo, nem à idade, nos níveis das imuneglobulinas estudadas, no LCR-SO; as taxas normais de IgG encontradas no LCR-SO de adultos são de 0,51 a 4,00 mg/100 ml; em crianças e adultos, as taxas fisiológicas desta imuneglobulina, em termos percentuais, são de 3 a 12%; o LCR-SO normal de adultos contém IgA em concentrações de até 0,32 mg/100 ml (0,9% do total protéico; f a IgM encontra-se no LCR-SO normal, tanto de crianças como de adultos, em níveis muito baixos, não ultrapassando 0,2 mg/100 ml (0,25% do total protéico.

Extrações sequenciais de chumbo e zinco em solos de área de mineração e metalurgia de metais pesados

Directory of Open Access Journals (Sweden)

Larissa Kummer

2011-12-01

Full Text Available A extração sequencial permite obter informações mais detalhadas sobre origem, modo de ocorrência, disponibilidade biológica e físico-química, mobilização e transporte dos metais pesados em ambientes naturais. Com o objetivo de estudar as formas de Pb e Zn foram selecionados oito perfis de solos de diferentes locais dentro de área de mineração e metalurgia de Pb, no município de Adrianópolis (PR, Vale do Rio Ribeira. As amostras foram coletadas nas profundidades de 0 a 10, 10 a 20 e 20 a 40 cm. Foram determinados os teores totais de Pb e Zn e sua especiação nas formas: solúvel; trocável; ligada a carbonatos; ligada à matéria orgânica; ligada aos óxidos de Fe de Al de baixa cristalinidade; ligada aos óxidos de Al cristalinos e filossilicatos 1:1 e 2:1; e residual. Com base nos valores percentuais de participação de cada fração nos teores totais, procedeu-se ao agrupamento das amostras similares por meio da análise de componentes principais (PCA. Houve basicamente duas formas de contaminação dos perfis de solo, sendo uma em decorrência das partículas das chaminés e a outra em função do acúmulo de rejeitos sólidos sobre os solos. A primeira foi mais prejudicial ao ambiente em razão dos maiores teores totais e de formas mais disponíveis no solo (solução mais trocável. De modo geral, houve maior associação de Pb aos carbonatos, seguida das frações residual e óxidos de Fe e Al de baixa cristalinidade. O Zn apresentou-se em formas mais insolúveis, aumentando a participação da fração residual nos teores totais. A PCA foi sensível às diferentes formas de Pb nos solos, pois promoveu o agrupamento das amostras, principalmente, em função da participação das formas trocáveis, ligadas aos óxidos de Fe e Al e ligadas aos carbonatos, em relação aos teores totais.

El espacio educativo y las referencias al género

Directory of Open Access Journals (Sweden)

Isabel CANTÓN MAYO

2007-01-01

Full Text Available La distribución del espacio en los centros educativos forma parte del currículum oculto de los mismos y las referencias al género en la distribución del mismo así lo demuestran. El artículo hace referencia a la noción de espacio en la educación partiendo de nociones pluridisciplinares: etimológicas, geográficas, filosóficas y educativas. Su vinculación histórica a la posesión, a la conquista y al dominio aporta elementos filogenéticos y ontogenéticos para determinar su uso y tradiciones ligadas al género en el centro educativo. La dimensión del centro como laberinto espacial se traduce en limitaciones para las mujeres. La distinta visión del espacio por hombres y mujeres tiene origen evolutivo; la división de las funciones de los géneros es consecuencia de la división en el sistema productivo. Los hombres han ocupado los espacios exteriores y han relegado a las mujeres a los interiores. Es posible ver el espacio con ojos distintos a los del propio género. Se trata de que hombres y mujeres compartamos la misma visión de los espacios que tiene el otro género para abarcar un ámbito más abierto y dinámico. En Educación los hombres han ocupado los espacios institucionales de poder en los centros educativos.

Ruedas cuadradas: Introducción al análisis de la falsa creatividad

Directory of Open Access Journals (Sweden)

Juan Martínez-Val

2012-04-01

Full Text Available El objetivo del artículo es analizar la denominada “falsa creatividad”. La creatividad es un valor social firmemente asentado. La falsa creatividad es aquella que se da en el proceso de creación, desarrollo o puesta a punto de un producto o servicio, destinado a un fin social. Es decir, una actividad que no tiene por qué estar ligada a las llamadas profesiones creativas ni a los conocidos como productos de diseño. El autor establece siete criterios diferenciales para analizar la “Falsa Creatividad”. Realiza una descripción exhaustiva de cada uno de ellos, identificando con ejemplos diversos los mismos. La falsa creatividad puede llevar al usuario o consumidor de un producto a rechazar este, o en todo caso, a obtener una imagen del mismo muy diferente a la que el creativo pensó, por lo que es indispensable garantizar que la creatividad en sí misma, no es un impedimento para el consumo de un producto concreto.

El Servicio al cliente: ¡Más que un querer, un deber!

Directory of Open Access Journals (Sweden)

Gustavo Vargas Vargas

2013-02-01

Full Text Available Uno de los aspectos más importantes en la generaciónde diferenciación con respecto a la competencia loconstituye “el Servicio al Cliente”. El Servicio al Cliente presenta características, queconvierten su tratamiento en complejo de implementar:Por ejemplo se menciona que el Servicio es intangible;que el Servicio es variable; que el Servicio se producey se consume a la vez; y, que el Servicio no puede seralmacenado. Lo anterior es influido por la cultura del paísdonde se ubique la empresa. El tratar el tema del Servicio al Cliente es muyimportante en aras de poder mantener a nuestros clientes.En este sentido, varias investigaciones citadas evidencianel impacto de un mal manejo del Servicio al Cliente, asícomo cifras ligadas en general a su comportamiento. El Servicio al Cliente se puede definir como el conjuntode aspectos relacionados con los clientes, y no sólo setrata de atención al cliente, aspecto que es comúnmenteconfundido con el primero. La atención al cliente es partedel Servicio, pero no lo es todo! Es necesario escapar de seguir tratando este tema consuperficialidad, y más bien, aprovechar su implementacióncomo medio de generar ventajas competitivas ante lacompetencia.   ABSTRACT One of the most important aspects in the generationof a differentiation with your competition is constitutedby “Customer Service”. Customer Service presents several characteristicsthat make it complex to implement: For example itis mentioned that Service is intangible; that Serviceis variable; that Service is produced and consumedsimultaneously; and, that Service cannot be stored. Thisis influenced by the culture of the country where thecompany is located. Dealing with the subject of Customer Service is veryimportant for the sake of being able to maintain ourclients. In this sense several quoted investigations showthe impact of a badly handed Customer Service, as wellas financial figures related to its performance. Customer Service can be

Periodismo y moral - Una aproximación al discurso de prensa sobre el narcotráfico en Colombia

Directory of Open Access Journals (Sweden)

Dra. Catalina González Quintero

1998-01-01

Full Text Available Colombia es un país violento: este estereotipo, generalizado tanto entre los colombianos como en otros países del mundo, encuentra parte de su razón de ser en el predominio de la temática violenta ligada al narcotráfico cuando se tratan noticias sobre Colombia en la prensa extranjera. Para adentramos al estudio de este estereotipo, tendremos en cuenta, primero, algunas consideraciones generales sobre la representación mediática de la violencia, y segundo, los resultados un análisis las noticias sobre Colombia aparecidas en el diario El País, de España. Este análisis hizo parte de la investigación -tendiente a tesis doctoral- que realicé recientemente sobre el cubrimiento de Colombia en la prensa extranjera. El periódico El País, de España, fue escogido para realizar el estudio, dada su importancia en el contexto europeo, pues se trata del diario de habla hispana más importante de dicho continente. La muestra observada corresponde a las noticias sobre Colombia aparecidas en El País durante 1988 y 1989, tiempo en el que se desarrolló en Colombia el 'narcoterrorismo', enfrentamiento entre el llamado cartel de Medellín y el gobierno Colombiano, que dejó muchas víctimas en la población civil.

X-Linked Agammaglobulinemia (XLA)

Science.gov (United States)

... Relations Cyber Infrastructure Computational Biology Equal Employment Opportunity Ethics Global Research Office of Mission Integration and Financial Management Strategic Planning Workforce Effectiveness Workplace Solutions Technology Transfer Intellectual Property Division of AIDS ...

Reconstitución inmune exitosa mediante trasplante de células madre hematopoyéticas en un paciente colombiano afectado con enfermedad granulomatosa crónica

Directory of Open Access Journals (Sweden)

Yermis Carolina Rocha

2016-06-01

Conclusión. El trasplante de células madre hematopoyéticas permite la reconstitución completa de la función inmunitaria relacionada con la actividad microbicida de las células fagocíticas de pacientes con enfermedad granulomatosa crónica ligada al cromosoma X.

La culpa y la vergüenza en la sexualidad adolescente: una perspectiva de género

OpenAIRE

Cadena López, Judith

2005-01-01

En el presente trabajo trataré de analizar aspectos relacionados con las manifestaciones de culpabilidad y vergüenza ligadas al ejercicio de la sexualidad, especialmente entre adolescentes y jóvenes. Haré alusión también, a algunas de las emociones que junto con la culpa y la vergüenza matizan el comportamiento de las personas, al momento de abordar tópicos relacionados con la sexualidad, situaciones de violencia y, en general al momento de mantener una relación interpers...

Casa - estudio de un escultor

Directory of Open Access Journals (Sweden)

Enzo Venturelli

2017-05-01

Full Text Available La nueva arquitectura, como las antiguas o simplemente anteriores, está ligada al concepto social de la época, a pesar de lo cual hay siempre una constante que debe mantenerse: el hombre vive dentro de la casa y, por consiguiente, es preciso que se le dé un carácter cálido, vivo, movido..., humano.

Derecho y Sociedad

Directory of Open Access Journals (Sweden)

ASOCIACION CIVIL DERECHO Y SOCIEDAD FACULTAD DE DERECHO

2010-12-01

Full Text Available Reseña de actividades desarrolladas por la Asociación Civil Derecho y Sociedad, a lo largo de su permanencia-dentro de la Facultad de Derecho de la Pontificia Universidad Católica del Perú vinculadas a la sociedad en general, algunas ligadas al campo jurídico, mientras que otras tuvieron un sentido altruista.

Espiritualidad y política: una propuesta tibetana para la transformación del orden mundial

OpenAIRE

Restrepo Ramírez, Álvaro Eduardo

2015-01-01

La Revolución Espiritual promovida por el Dalai Lama plantea una unión entre espiritualidad y política. El proyecto de una ética universal, que se inscribe dentro de dicha Revolución, busca impactar la manera en que las relaciones internacionales se desarrollan, dándole prevalencia a los valores humanos. Sin embargo, esa proposición se encuentra ligada al contexto de exilio en el marco del conflicto sino-tibetano que afecta al continente asiático. Por esto, en la presente monografía, haciendo...

Aristóteles y los publicistas: el anuncio de televisión como forma dramática

OpenAIRE

Esslin, Martin; Mora Contreras, Francisco Javier

2007-01-01

Presentación, traducción y notas de Kiko Mora (Universidad de Alicante). Martin Esslin desmonta la arquitectura narrativa del anuncio televisivo sobre la base de la retórica dramática aristotélica y de las formas del teatro contemporáneo, al tiempo que afirma la condición ritual de la publicidad ligada a los mitos que construyen nuestra ideología y nuestra cultura.

El «saber artístico» de un antropólogo y el estudio de la cultura en el Perú: A propósito de una obra olvidada de José María Arguedas

Directory of Open Access Journals (Sweden)

Juan Javier Rivera Andía

2011-12-01

Full Text Available Este breve texto intenta llamar la atención sobre ciertas preguntas en torno al carácter inédito que ha mantenido, por casi medio siglo, un archivo etnográfico acopiado por J. M. Arguedas. Entre ellas, nos preguntamos si tal condición estaría ligada a la forma en que Arguedas concebía el saber de la antropología.

El (los Sur buscando al Sur. Una construcción entre estereotipos y realidad.

Directory of Open Access Journals (Sweden)

Mabel Franzone

2010-11-01

Full Text Available Todas las lecturas que podamos hacer del Sur, de sus propias representaciones, de aquellas vehiculizadas por el Norte, de sus creaciones, de sus reacciones, de su búsqueda constante de identidad, son lecturas de múltiples situaciones, que llaman a cruces insoslayables entre pueblos, entre distintas etnias, entre disciplinas, entre sentimientos que van desde el rechazo hasta la atracción casi magnética entre los dos hemisferios. Nuestra intención primera era la de reunir de manera aproximativa las problemáticas actuales de los Sur, ligadas a lo imaginario.

De la pasión a la adicción: las tenues fronteras del amor

OpenAIRE

Cajiao Restrepo, Francisco

2010-01-01

Toda la actuación del erotismo tiene como fin alcanzar al ser en lo más íntimo, en el punto en que el ánimo falta. El paso del estado normal al de deseo erótico supone en nosotros la disolución relativa del ser constituido en el orden discontinuo. Este término de disolución responde a la expresión familiar de vida disoluta, ligada a la actividad erótica. (...) Toda la actuación erótica tiene como principio una destrucción de la estructura del ser cerrado.

Gestión del conocimiento, aprendizaje organizacional y psicología cognitiva: desentrañando importantes competencias individuales y organizacionales

Directory of Open Access Journals (Sweden)

PAUL R. SPARROW

2002-01-01

Deben absorber, procesar, dar sentido y después difundir un asombroso flujo de información para tomar decisiones y resolver problemas. Las perspectivas del aprendizaje organizacional y de la gestión del conocimiento se utilizan para identificar una serie de competencias mportantes, necesarias para ser eficaces en los nuevos diseños organizacionales. Estas competencias, al fin y al cabo, tienen sus raíces en la cognición y en el comportamiento individual; sin embargo, también se encuentran cada vez más inseparablemente ligadas a una serie de capacidades colectivas y organizacionales.

La política como espectáculo

Directory of Open Access Journals (Sweden)

Juan E. Fernández

2015-01-01

Full Text Available La política siempre estuvo ligada al espectáculo, la pompa y el teatro. La antigua oratoria imperial, eclesiástica y solemne; los debates cargados de ironías en asambleas y parlamentos; y los actuales espectáculos políticos televisados difieren más en la forma y el alcance (curiosamente más democrático que en su ausencia comunicacional. El autor piensa, que hay mucho de siniestro y peligroso en la trivialización del camino al poder cuando lo que está en juego parece ser la vida misma.

Estudio de factibilidad para la creación de una empresa productora y distribuidora de empanadas que se utiliza como materia prima el arroz en el Distrito Metropolitano de Quito.

OpenAIRE

López Quimbita, Daniela Cecilia

2012-01-01

La alimentación, es una necesidad íntimamente ligada al hombre, no solo como un evento con importancia biológica, también se encuentra ampliamente relacionada con la cultura. Se habla entonces de que el arroz es un alimento que ha acompañado al hombre desde hace miles de años y que además hace parte de su dieta cotidiana, no solo por ser un cereal abundante sino también por su valor nutricional, su alto aporte calórico y sobre todo por su accesibilidad y economía. Adicionalmente ayuda a comba...

El papel económico de las cofradías en el crepúsculo de la colonia y el ascenso de las sociedades mercantiles. Análisis de protocolos coloniales de San José (1837-1842)

OpenAIRE

Abarca Hernández, Oriester; Bartels Villanueva, Jorge

2011-01-01

Las cofradías cumplieron en la Colonia y hasta la primera mitad del siglo XIX un papel no sólo religioso sino también económico al poseer tierras y actuar como entidades financieras. Las personas ligadas a las operaciones económicas de las cofradías eran los miembros de la élite local, quienes formaban una red social. Junto al capital manejado por la Iglesia y sus instituciones (cofradías, y diversos tipos de fundaciones como las capellanías y los mayorazgos) a lo largo de la Colonia se produ...

Daniel Solano: "Me matan si no trabajo, y si trabajo me matan"

Directory of Open Access Journals (Sweden)

Jessica Visotsky

2015-01-01

Full Text Available Existe una creencia en el noroeste argentino que es la Leyenda del Familiar, esta leyenda que al parecer surgiría ligada al desarrollo industrial, nace y se desarrolla ligada a la instalación de los ingenios azucareros a fines del siglo XIX y principios del XX. En los mismos se llevó a cabo la explotación de miles y miles de trabajadores bajo condiciones inhumanas de trabajo y salarios miserables. El familiar era el perro del diablo o el diablo mismo, podía también adoptar formas de viborón, toro, burro, por lo general era un perro, negro, desprendía llamaradas de fuego por los ojos, tenía una fuerza descomunal en sus garras, con quién el patrón del ingenio o capataz había hecho un pacto: que saciaría su hambre con la entrega de un obrero por año, y éste le aseguraría prosperidad. En distintas situaciones un obrero podía encontrar la muerte, sea por accidentes, sea cayendo a una caldera, atrapado en una cinta trituradora de la caña, o si un trabajador desaparecía se decía que era obra “del familiar”.

Comunicación institucional en una organización regional. Federación Regional de Municipios y Provincias de Castilla y León

Directory of Open Access Journals (Sweden)

Alberto Martín Bravo

2012-04-01

Full Text Available Explicación de cómo una organización regional apuesta por la Comunicación Institucional. Cambio de logotipo y aplicación de la nueva imagen corporativa. Desarrollo de comunicación interna y externa. Elaboración de la nueva página web, ligada al entorno 2.0. y de cómo una nueva sede permitirá avanzar en Responsabilidad Social Institucional.

La música como instrumento y producto evolutivo. Cuatro aproximaciones al fenómeno musical

OpenAIRE

Maúrtua Alva, José Gabriel

2015-01-01

El presente trabajo se enmarca dentro del ámbito de la epistemología de las Ciencias Sociales con linderos con la neurociencia, la psicología, la antropología, la arqueología y la música misma. Partimos de una aproximación ligada a una concepción evolutiva de la música y las relaciones que comparte con las diversas áreas del conocimiento. Se dejara un poco entre paréntesis, aproximaciones de corte más “humanístico” que, si bien valiosas y ricas en muchos aspectos, no necesariamente se lig...

Genetics Home Reference: X-linked agammaglobulinemia

Science.gov (United States)

... 5 [updated 2016 Aug 4]. In: Pagon RA, Adam MP, Ardinger HH, Wallace SE, Amemiya A, Bean LJH, Bird TD, Ledbetter N, Mefford HC, Smith RJH, Stephens K, editors. GeneReviews® [Internet]. Seattle (WA): ...

Conexión entre inmunodeficiencia primaria y autoinmunidad

OpenAIRE

Lahera Sánchez, Tania

2010-01-01

Inmunodeficiencia y autoinmunidad constituyen 2 polos de la respuesta inmunitaria que pueden interrelacionarse con cierta frecuencia. En este artículo se exponen los síndromes autoinmunes que son causados por inmunodeficiencias primarias. También se describen otras inmunodeficiencias primarias como la inmunodeficiencia variable común, el síndrome de hiper Ig M, la deficiencia selectiva de Ig A, la hipogammaglobulinemia ligada al cromosoma X, el síndrome de Di George, la enfermedad granulomato...

[Satisfactory evolution of a patient diagnosed in childhood with Bruton's disease].

Science.gov (United States)

Román Jiménez, María Guadalupe; Yamazaki Nakashimada, Marco Antonio; Blancas Galicia, Lizbeth

2010-01-01

Bruton's agammaglobulinemia is a primary immunodeficiency with a disease onset during the first months of age, when the maternal serum immunoglobulin levels decrease. It is characterized by recurrent infections and agammaglobulinemia. We report the case of a 6-year-old male patient with third-degree consanguinity, product of a third pregnancy and complete immunization scheme. He had a history of oral candidiasis at the age of 3 months, chicken pox at the age of 7 months, and two episodes of complicated bronchopneumonia at the age of 1 year and 6 years. He was admitted to the hospital because of fever and cough. Examination of the chest showed rales and right basilar hypoventilation, and a blood cell count revealed leukocytosis and neutrophilia. The diagnosis of pneumonia was made. He was treated with IV antibiotics. Serum immunoglobulins were reported to be low (IgM 55 mg/dL, IgA 0.9 mg/dL, and IgG 199 mg/dL). With these findings the clinical diagnosis of X-linked agammaglobulinemia (ALX) was concluded. A molecular test was performed fining a BTK gene confirming the diagnosis of Bruton's disease. Therapy with intravenous IgG was started every 21 days. During his evolution, he presented three episodes of rhinosinusitis, one of suppurative otitis media, and four events of pneumonia that required 37 days of hospitalization. After hospital discharge, the patient was free of infections and he returned to his daily activities. In cases of recurrent and severe respiratory infections in children, we must consider primary immunodeficiency disease in the differential diagnosis, mainly antibiotic deficiency. Early diagnosis and treatment improves the survival and quality of life in these patients.

DEVELOPMENT OF REAL-TIME MULTIPLEX PCR FOR THE QUANTITATIVE DETERMINATION OF TREC'S AND KREC'S IN WHOLE BLOOD AND IN DRIED BLOOD SPOTS

Directory of Open Access Journals (Sweden)

M. A. Gordukova

2015-01-01

Full Text Available Primary immunodeficiencies (PID such as severe combined immunodeficiency (SCID and X-linked agammaglobulinemia are characterized by the lack of functional Tand B-cells, respectively. Without early diagnosis and prompt treatment children with PID suffer from severe infectious diseases, leading to their death or disability. Our purpose was developing of simple, inexpensive, high throughput technique based on the quantitative determination of TREC and KREC molecules by real-time PCR, and its validation in a group of children with a verified diagnosis of SCID and X-linked agammaglobulinemia.In this study, we developed and validated multiplex real-time PCR for the TREC’s and KREC’s quantitative analysis. We have shown that linear range of Ct changes depending on the concentrations of targets with a correlation coefficient R2 not worse than 0.98 was observed at concentrations from 109 to 5 × 104 copies per ml. The lowest amount of targets reliably detected in a reaction volume was 10 TREC’s copies, 5 KREC ‘s copies and 5 copies of internal control (IL17RA. We determined the age-depended reference values of TRECs and KRECs in whole blood in 29 boys and 27 girls with normal immunological parameters. The normal cut-offs for TRECs and KRECs were defined in dry blood spots depending on the method of extraction.The proposed method showed 100% diagnostic sensitivity and specificity in the studied group. The method can be proposed as a screening tool for the diagnosis of SCID and X-linked agammaglobulinemia both in whole blood and in the dry blood spots. The further investigation is required with larger number of samples. 

PAISAGEM URBANA E ÁREAS VERDES: CONTEXTO DOS PARQUES URBANOS DE GOIÂNIA

Directory of Open Access Journals (Sweden)

Clarinda Aparecida da Silva

2012-12-01

Full Text Available Este artigo tem como objetivo discutir a evolução do conceito de paisagem, a partir da análise da apropriação dessa categoria nos dias de hoje. As reflexões aqui apresentadas terão como objeto de estudo as áreas verdes, que têm sido foco da mídia turística e da administração pública municipal, que as utilizam para vender a imagem de qualidade de vida na capital. Além disso, buscam, por meio de intensa divulgação, atrair investimentos do mercado nacional e internacional para desenvolver atividades econômicas ligadas ao turismo e à construção civil. Essas iniciativas transformam a natureza na cidade – que deveria estar ligada à qualidade ambiental, em virtude de amenizar os impactos advindos da crescente e desordenada urbanização – em “fetiche” e objeto de fascinação dos apreciadores da paisagem dos parques urbanos.

Al-Qurû’ fi Al-Qur’an ‘Inda Al-Anbary fi Al-Adhdâd

Directory of Open Access Journals (Sweden)

Raushani Azza

2018-03-01

Full Text Available This study examines about the term al-Qurû in the Qur’an. Al-Qurû is one of the most popular discussions among muslim scholars and mufasir, both in terms of language and fiqh. However, there is a bate among muslim scholar and mufasir about the meaning of al-Qurû. It’s because al-Qurû is one of the sentence of al-Adhdâd wich has two meaning, especially in the Qur’an, namely haid (menstruation and thahr. One of the most popular muslim scholar who concern in Qur’an and Arabic is al-Anbari with his book al-Adhdâd. Al-Anbari explains that Qurû has two meanings, First, al-Qurû in etymology is the form of Jama’ from aqra and qurû. Second, al-Qurû has a meaning of menstruation, thahr, or the period of iddah as a sign of being allowed to remarry after certain period of time.

Al-Âyah al-Mutasyâbihât al-Lafzhiyyah fi Sûrah al-An’âm ‘Inda al-Kirmâny

Directory of Open Access Journals (Sweden)

Hikmatiar Pasya

2017-07-01

Full Text Available This paper discusses about the verses of mutasyâbihât in the Quran. The debate of this verses caused various opinions. The meaning of the mutasyâbihât in this paper is the similarity and difference of the words in the Qur'an. Mufasir have different opinion about the meaning of the verse of mutasyâbihât al-lafdzi. In addition, many Hufadz of the Quran who are confused from one verse to another, or one chapter to another. It’s because similarity of verses in the Qur'an with other verses. So the writer wants to explain the verses mutasyâbihât al-lafdzi in the perspective of Hamzh al-Karmani in Surah al-An'âm. In this discussion the author discovers some passages in mutasyâbihât al-lafdzi, namely Asrâru al-balaghah fi mutasyabih al-lafdzi, Asrar al-balaghah fi mutasyabih al-hurf, and murâ'ah al-ikhtilâfmurâd bi al-lafdzi al-mukarrar.

LA POLITICA Y LO POLITICO: DEL DILEMA AL PROBLEMA. Análisis de las argumentaciones y propuestas de acción de jóvenes estudiantes de la Ciudad de Buenos Aires

Directory of Open Access Journals (Sweden)

Miriam Kriger

2015-01-01

Full Text Available El artículo presenta hallazgos de un estudio realizado en BuenosAires y Conurbano sobre las representaciones de “la política” y“lo político” de jóvenes estudiantes. Tomando como punto departida el antagonismo hallado entre ellas en el contextoposterior a la crisis del 2001, proponemos indagar si en laactualidad se ha producido una re articulación ligada a unamayor politización. Se analizan los argumentos surgidos de ladiscusión grupal en torno al planteo de un dilema moral,enfatizando en los sentidos, valoraciones, posicionamientos yactitudes hacia la política como concepto ideal y prácticasituada. Encontramos mayor confianza en la “’política’” comoherramienta de construcción social, a la vez que persiste unaconcesión antipolítica fundada en la desconfianza hacia lospolíticos y las prácticas facciosas. Finalmente, se muestra quecuando el dilema es problematizado reflexivamente, se accede aun mayor pensamiento político y comprensión de los vínculosentre ciudadanía y clase política.

¿Cómo un liderazgo pedagógico y distribuido mejora los logros académicos? Revisión de la investigación y propuesta

Directory of Open Access Journals (Sweden)

ANTONIO BOLÍVAR-BOTÍA

2010-01-01

Full Text Available El artículo hace una revisión de la literatura y de algunas de las experiencias internacionales más recientes sobre cómo el liderazgo pedagógico constituye un factor relevante en la mejora de resultados de los establecimientos educativos. A su vez, presenta un diseño metodológico de investigación para analizar, por un lado, los factores y variables ligadas al liderazgo pedagógico que ejercen un impacto sobre los aprendizajes del alumnado y, por otro, qué buenas prácticas de liderazgo, no limitadas al equipo directivo, contribuyen decididamente a la mejora de la educación.

Análisis del procesamiento criminalístico del lugar de los hechos, en conflictos armados de alto riesgo en la franja fronteriza de Tamaulipas/Processing the place of the facts in armed conflict in northern Tamaulipas

Directory of Open Access Journals (Sweden)

Israel Estrada Camacho

2012-08-01

Full Text Available En México la violencia se ha incrementado, hay más 47,515 mil muertes ligadas a la delincuencia organizada y los criminalistas incursionaron en escenas del crimen diferentes y con técnicas desactualizadas. Es por esto que se investigó el procesamiento del lugar de los hechos de conflictos al Norte de Tamaulipas, utilizando un diseño documental y de campo consultando a peritos con experiencia en esta zona. Al 76 % les es imposible seguir la metodología establecida y el 64% adecuarían las técnicas. Según los resultados obtenidos sabemos que el riesgo, las magnitudes del lugar y el tiempo han causado esta situación.

Género y masculinidades ¿una transición discursiva incluyente? : intervenciones sobre salud sexual y salud reproductiva en las Fuerzas Armadas y la Policía Nacional.

OpenAIRE

Duque Vanegas, Janina María

2012-01-01

La categoría de género ligada al desarrollo (GED), a pesar de haber surgido con el fin de mirar el desarrollo como un asunto relacional, continúa centrando su atención en las mujeres. Consecuentemente como respuesta a esta tendencia se implementan proyectos de intervención que se fundamentan en un nuevo discurso: masculinidades. El presente estudio analiza los discursos alrededor del género y la masculinidad en dos proyectos sobre salud sexual y salud reproductiva, implementados por el Fondo ...

Ángulos de paralaje

OpenAIRE

Rico Zambrana, Alberto

2016-01-01

Este proyecto artístico consiste en dos series de trabajo que tratan la percepción del individuo y de su entorno a través de las interacciones con medio tecnológicos. Se trata de un estudio en dos sentidos: «hacia adentro», esto es, la propiocepción, la percepción de uno mismo, dirección muy ligada al concepto de auto-consciencia; y «hacia fuera», la exterocepción, la percepción de nuestro entorno.

Masonería y Sociabilidad en el centro y sur de la campaña bonaerense: Fines del siglo XIX principios del XX

OpenAIRE

Yolanda de Paz Trueba

2011-01-01

El objetivo de este trabajo es reflexionar en torno a la relación establecida entre la sociabilidad política derivada de la influencia masónica y otras formas de sociabilidad previas ligadas al catolicismo, en el marco de la construcción del Estado en sus diversos niveles a fines del siglo XIX. Este abordaje será realizado a través del análisis de pueblos de la campaña bonaerense, espacios no estudiados en este sentido hasta el momento.

Riesgo psicosocial de los trabajadores inmigrantes en España

OpenAIRE

Sanchis-Ruiz, A.; Varela-Hall, C.; Martins-Muñoz, G.; Díaz-Sotero, M.

2013-01-01

Introducción: España en las últimas décadas ha sido un receptor de un intenso flujo migratorio, sin embargo, por la crisis financiera actual, se está evidenciando un gran descenso. La inmigración está ligada al trabajo y búsqueda de mejores condiciones de vida. El trabajador inmigrante presenta una serie de riesgos psicosociales. Metodología: Se realiza búsqueda en principales bases de datos bibliográficas mediante palabras clave y se descriptores, aplicando posteriormente criterios de pertin...

Actividades de Física y Biología con ordenador

OpenAIRE

I. GARCÍA MATEOS; José Manuel VACAS PEÑA

2009-01-01

En este artículo se presentan dos programas de simulación con ordenador para ser aplicados en la enseñanza de las Ciencias Experimentales.El programa Circuitos Eléctricos, permite crear circuitos de corriente continua con diferentes componentes y estudiar la Ley de Ohm y las leyes de las resistencias.El programa Genética simula el cruce de moscas de la especie Drosophila melanogaster y permite estudiar las Leyes de Mendel, ligamiento factorial, entrecruzamiento y la herencia ligada al sexo.

Tratamiento fisioterápico en la distrofia muscular de Duchenne

OpenAIRE

Burgos González, Sara

2014-01-01

la Distrofia Muscular de Duchenne es una enfermedad neuromuscular hereditaria de carácter recesivo ligada al cromosoma X. Afecta aproximadamente a 1 de cada 3500 niños varones nacidos vivos. Se caracteriza por cursar con una debilidad progresiva como resultado de una degeneración de los músculos, iniciando en piernas y pelvis y posteriormente abarcando todo el cuerpo. Este trastorno se debe a una mutación que es culpable de la ausencia de una proteína muscular, la distrofina...

Diffusion-induced quadrupole relaxation of 27Al nuclei in dilute Al-Ti, Al-Cr, Al-Mn, and Al-Cu alloys at high temperatures

International Nuclear Information System (INIS)

Bottyan, L.; Beke, D.L.; Tompa, K.

1983-01-01

The temperature dependence of the laboratory frame spin-lattice relaxation time of 27 Al nuclei is measured in 5N Al and in dilute Al-Ti, Al-Cr, Al-Mn, and Al-Cu alloys at 5.7 and 9.7 MHz resonance frequencies. The relaxation in pure aluminium is found to be purely due to the conduction electrons. An excess T 1 -relaxation contribution is detected in all Al-3d alloys investigated above 670 K. The excess relaxation rate is proportional to the impurity content and the temperature dependence of the excess contribution is of Arrhenius-type with an activation energy of (1.3 +- 0.3) eV for all of the investigated alloys. The relaxation contribution is found to be quadrupolar in origin and is caused by the relative diffusional jumps of solute atoms and Al atoms relatively far from the impurity. (author)

Interfacial phenomena in the reactions of Al-B, Al-Ti-B, and Al-Zr-B alloys with KF-AlF3 and NaF-AlF3 melts

International Nuclear Information System (INIS)

Lee, M.S.; Terry, B.S.; Grieveson, P.

1993-01-01

The interfacial phenomena occurring during the contacting of liquid Al-B, Al-Ti-B, and Al-Zr-B melts with KF-AlF 3 liquid fluxes have been investigated by optical examination of quenched metal drops previously immersed in the liquid fluxes. Reactions in the Al-B/KF-AlF 3 system involve the formation of metastable AlB 12 at the metal/flux interface. At high KBF 4 levels in the flux, the AlB 12 is dispersed in the flux and also at low KBF 4 levels in the metal. Reactions in the Al-Ti-B/KF-AlF 3 system involve the formation of TiB 2 , which may be dispersed in either the metal or the flux depending upon the composition of the flux. The results obtained for the Al-Ti-B/NaF-AlF 3 and Al-Zr-B/KF-AlF 3 systems were similar to those observed for the Al-Ti-B/KF-AlF 3 system

Synthesizing (ZrAl3 + AlN)/Mg-Al composites by a 'matrix exchange' method

Science.gov (United States)

Gao, Tong; Li, Zengqiang; Hu, Kaiqi; Han, Mengxia; Liu, Xiangfa

2018-06-01

A method named 'matrix exchange' to synthesize ZrAl3 and AlN reinforced Mg-Al composite was developed in this paper. By inserting Al-10ZrN master alloy into Mg matrix and reheating the cooled ingot to 550 °C, Al and Mg atoms diffuse to the opposite side. As a result, liquid melt occurs once the interface areas reach to proper compositions. Then dissolved Al atoms react with ZrN, leading to the in-situ formation of ZrAl3 and AlN particles, while the Al matrix is finally replaced by Mg. This study provides a new insight for preparing Mg composites.

Coupled growth of Al-Al2Cu eutectics in Al-Cu-Ag alloys

International Nuclear Information System (INIS)

Hecht, U; Witusiewicz, V; Drevermann, A

2012-01-01

Coupled eutectic growth of Al and Al 2 Cu was investigated in univariant Al-Cu-Ag alloys during solidification with planar and cellular morphology. Experiments reveal the dynamic selection of small spacings, below the minimum undercooling spacing and show that distinct morphological features pertain to nearly isotropic or anisotropic Al-Al 2 Cu interfaces.

AL ITTIJAHAT AL MUNHARIFAH FI AT TAFSIR LI BADLI ASHAB AL MADZAHIB AL NAHWIYYAH WA BADL MAN YAJHALUNA QAWAID AL LUGHAH AL ARABIYYAH FI NADHAR MUHAMMAD HUSAIN AL DZAHABIY

Directory of Open Access Journals (Sweden)

Misbakhudin Misbakhudin

2017-06-01

Full Text Available One of the most precious achievement in qur’anic studies was the book of Al-Ittijâhât al-Munharifah fî al-Tafsîr: Dawâfi’uha wa Daf’uha written by A great Islamic scholar, Muhammad Husein al-Dzahabî. He was succeeded in discussing several issues of corruptions of the exegesis of the holy Qur’an. This article is aimed to explain and to describe his analysis toward several corrupted linguist interpretations in their originations and such corrupted linguistic interpretations of the holy Qur’an which are ignoring Arabic structures and grammers

Reseña del libro: Literatura y violencia en la narrativa latinoamericana reciente de Teresa Basile (compiladora)

OpenAIRE

Codaro, Laura

2016-01-01

Frente al genocidio, los sucesos límites y la violencia extrema en todas sus formas, el arte y la literatura en particular forjan diversos modos y retóricas de narrar el horror. Este libro propone un recorrido por las narrativas latinoamericanas ligadas a la historia reciente –parte de los años sesenta y se extiende prácticamente hasta la actualidad-, a la vez que teoriza y reflexiona sobre las voces y el lenguaje que caracterizan esas experiencias traumáticas. Se trata de una compilación que...

Masonería y Sociabilidad en el centro y sur de la campaña bonaerense: Fines del siglo XIX principios del XX

Directory of Open Access Journals (Sweden)

Yolanda de Paz Trueba

2011-12-01

Full Text Available El objetivo de este trabajo es reflexionar en torno a la relación establecida entre la sociabilidad política derivada de la influencia masónica y otras formas de sociabilidad previas ligadas al catolicismo, en el marco de la construcción del Estado en sus diversos niveles a fines del siglo XIX. Este abordaje será realizado a través del análisis de pueblos de la campaña bonaerense, espacios no estudiados en este sentido hasta el momento.

Estrategias motivadoras en alumnado con síndrome de Down

OpenAIRE

Salgado López, Soraya

2015-01-01

El presente trabajo tiene como objetivo alcanzar la motivación dentro del aula en alumnos con necesidades educativas especiales, en concreto al alumnado con síndrome de Down. Por ello, en la primera parte del trabajo he realizado una fundamentación teórica, sobre síndrome de Down, así como las estrategias de aprendizaje ligadas hacia la motivación. La segunda parte del trabajo aborda la intervención educativa, desde la perspectiva de la Educación Especial. Así pues, he realizado una unidad di...

A participação da fisioterapia respiratória intensiva no tempo de ventilação, no tempo de permanência e mortalidade de pacientes internados na unidade de terapia intensiva de um hospital privado

OpenAIRE

Teixeira, Vanessa de Amorim

2006-01-01

Introdução: O fisioterapeuta, na Unidade de Terapia Intensiva (UTI), é responsável por desenvolver um tratamento eficiente que possibilite a menor dependência do paciente do ventilador mecânico, bem como melhorar a qualidade de vida durante a sua hospitalização. Além disso, a terapia eficiente aprimora a capacidade funcional do paciente e restaura a sua independência física e respiratória, diminuindo o risco de complicações ligadas à imobilidade no leito. Apesar disso, o papel do fisioterapeu...

Eutanasia y valor absoluto de la vida

OpenAIRE

Collado Madurga, Ana María; Piñón Gámez, Aimeé; Odales Ibarra, Rogelio; Acosta Quintana, Leanne; Serra Larín, Silvia

2011-01-01

La eutanasia no es un problema nuevo, sino que se ha tratado en cada momento en dependencia de las circunstancias, ligada a diferencias políticas, culturales y religiosas. Es la eutanasia uno de los debates éticos de mayor actualidad. La literatura está llena de consideraciones a favor o en contra, en torno a la ética que comprometen al médico y a la sociedad a aliviar el sufrimiento y el dolor, particularmente en pacientes terminales cuando estos toman la decisión consciente de finalizar sus...

Laboratorio virtual de matemáticas (ALME2005)

OpenAIRE

Arrieta, Jaime; Canul, Antonio; Martínez, Emir

2005-01-01

Concebimos que la modelación de fenómenos es una práctica que está ligada a la construcción de conocimientos matemáticos y en este sentido se han realizado investigaciones entorno a su incorporación al contexto escolar. Sin embargo, el incorporar la experimentación en el aula de matemáticas conlleva dificultades, una de ellas es la carencia de material de laboratorio. El laboratorio virtual es un proyecto que intenta suplir la ausencia de un laboratorio físicamente, sin embargo, esta sustituc...

Programa de detección de errores innatos del metabolismo, Minas de Matahambre 2008-2012

OpenAIRE

Oliva López, Yinet; González García, Raúl

2014-01-01

Introducción: los errores innatos del metabolismo son un grupo muy heterogéneo de enfermedades congénitas, determinadas por el bloqueo de un paso metabólico debido a la mutación de genes responsables del funcionamiento del mismo. Con herencia autosómico recesiva y en algunos casos ligada al cromosoma X, su diagnóstico precoz y el uso correcto de todas las opciones terapéuticas posibles es fundamental para asegurar la supervivencia y la mejor calidad de vida posible de los individuos afectados...

Actividades de Física y Biología con ordenador

Directory of Open Access Journals (Sweden)

I. GARCÍA MATEOS

2009-12-01

Full Text Available En este artículo se presentan dos programas de simulación con ordenador para ser aplicados en la enseñanza de las Ciencias Experimentales.El programa Circuitos Eléctricos, permite crear circuitos de corriente continua con diferentes componentes y estudiar la Ley de Ohm y las leyes de las resistencias.El programa Genética simula el cruce de moscas de la especie Drosophila melanogaster y permite estudiar las Leyes de Mendel, ligamiento factorial, entrecruzamiento y la herencia ligada al sexo.

Adolescencia y suicidio: Entre la perspectiva neuropsicológica de Diamond y Psicoevolutiva de Dolto

OpenAIRE

Mónica Viviana Gómez; Diego Alejandro Calle; José Flórez Ocampo; Luisa Victoria Álvarez

2015-01-01

Este artículo presenta una reflexión sobre la problemática del suicidio en la adolescencia, tomando en consideración algunos aspectos comunes asociados al concepto de desarrollo entre la perspectiva neuropsicológica de Adele Diamond y la perspectiva psicoevolutiva de Françoise Dolto. Las dos perspectivas permiten un acercamiento a las nociones de temporalidad y vulnerabilidad, claves para la comprensión de dicha problemática, la cual está ligada a las condiciones socio históricas de la époc...

La legislación internacional sobre pueblos indígenas en el ordenamiento territorial y planes de desarrollo económico

OpenAIRE

Ibañez Sánchez, Miguel

2016-01-01

La situación de los pueblos indígenas ha sido largamente documentada en la historia peruana y ha estado ligada al despojo de sus tierras, territorios y recursos naturales. El modelo extractivo de crecimiento económico ha incrementado las actividades mineras, forestales y la producción de petróleo, en territorios de pueblos indígenas. Por otro lado, el ordenamiento territorial, la zonificación ecológica y los incentivos a la inversión privada, cada vez excluyen a los pueblos indígenas poniendo...

La danse folklorique en Tunisie

Directory of Open Access Journals (Sweden)

Salah El Mahdi

1995-01-01

Full Text Available Se ofrece una visión general de los diferentes tipos de danza folklórica en Túnez cuyas principales características son estar estrechamente ligada a la música vocal e instrumental y poseer un marcado carácter de improvisación por parte del bailarín con respecto al ritmo que acompaña a dicha música, así como un análisis de los aspectos que conciernen a la preservación de su rico legado coreográfico.

Incontinencia pigmenti con defecto en la inmunidad celular

OpenAIRE

Zamora-Chávez, Antonio; Escobar-Sánchez, Argelia; Sadowinski-Pine, Stanislaw; Saucedo-Ramírez, Omar Josué; Delgado-Barrera, Palmira; Enríquez-Quiñones, Claudia G.

2015-01-01

Introducción: La incontinencia pigmenti es una enfermedad genética rara ligada al cromosoma X, letal en el varón, que afecta a todos los tejidos derivados del ectodermo, como piel, faneras, ojos, dientes y sistema nervioso central, y presenta alteraciones de grado variable en la inmunidad celular. Se caracteriza por la disminución de la melanina en la epidermis y su incremento en la dermis. Caso clínico: Se presenta el caso de una lactante de dos meses de edad con incontinencia pigmenti gr...

El islario o la travesía literaria de Julieta Campos

Directory of Open Access Journals (Sweden)

Elba Sánchez Rolón

2009-07-01

Full Text Available Entre el juego de figuras sobre la posibilidad de un origen y los espacios imaginarios, la obra de Julieta Campos se encuentra ligada al viaje, a la travesía por las islas que componen el trazado laberíntico de escritura. Recorrer esta obra implica realizar una navegación por textos que oscilan entre su independencia y su entrecruzamiento; itinerarios de lectura propia y ajena desde miradores diversos. Fragmentos de una obra proyectada y reflexionada constantemente que al mismo tiempo constituyen unidades con autonomía permitiéndonos trazar una cartografía de la búsqueda o recorrido con pretensión integradora a lo largo de su obra literaria y ensayística.

LA PROBLEMÁTICA AGRARIA EN UN ENTORNO DE APERTURA

Directory of Open Access Journals (Sweden)

German Masís Morales

2006-07-01

Full Text Available La Apertura ComercialEn la última década, el entorno de apertura y liberalización, ha privilegiado los aspectos de equilibrio macroeconómico, inserción en el nuevo contexto mundial y protagonismo del sector privado, junto al debilitamiento del Estado. La estrategia aperturista ligada al modelo exportador, privilegia la apertura indiscriminada de mercados y estimula el desarrollo del sector externo de la economía, excluyendo a los sectores que no se vinculan a la actividad exportadora. La política comercial derivada del proceso deapertura, abrió una mayor incertidumbre en el comportamiento de los mercados y posibilidades de competencia desleal y dumping en muchos de los rubros de la pequeña y mediana producción.

Empatía y habilidades sociales en enfermeras asistenciales en el Servicio Madrileño de Salud

OpenAIRE

Ayuso Murillo, Diego

2016-01-01

La empatía y las habilidades sociales, ligadas a la comunicación con el paciente y familia, son consideradas dimensiones claves para poder desarrollar con éxito la profesión enfermera y alcanzar cotas de excelencia ligada a la satisfacción del pacien

Familial ALS

Science.gov (United States)

Boylan, Kevin

2015-01-01

Synopsis Genes linked to ALS susceptibility are being identified at an increasing rate owing to advances in molecular genetic technology. Genetic mechanisms in ALS pathogenesis appear to exert major effects in ~10% of patients, but genetic factors at some level may be important components of disease risk in most ALS patients. Identification of gene variants associated with ALS has informed concepts of the pathogenesis of ALS, aided the identification of therapeutic targets, facilitated research to develop new ALS biomarkers, and supported the establishment of clinical diagnostic tests for ALS-linked genes. Translation of this knowledge to ALS therapy development is ongoing. PMID:26515623

Malamih al-Ashwat al-'Arabiyyah wa Makharijaha

Directory of Open Access Journals (Sweden)

Amrah Muhammad Kasim

2015-12-01

Full Text Available This writing discusses on al-ashwat al-‘arabiyyah that is known with “phonetic” term. It talks and interprets makharij al-huruf or place for producing sounds and also processing production of sounds by parts of mouth in Arabic language. The problems of sounds and its systems in Arabic language have been conducted by the scholars of al-ashwat al-‘arabiyyah attractively, neatly, and detail and gotten ahead the phonetic western scholars. Part of their analysis results formulate the study about al-ashwat al-sakinah (al-Shamit is known with vocal and consonant sounds in research questions shawait – shawamit. Ibnu Jinni has formulated “harakat”(wowel in Arabic language and dimension of letter  mad and liyn on alif  letter - waw - ya’ (ا و ي, from these letters create  harakat fathah, dammah, and kasrah. Moreover, in this writing also exist the description of hija’i letters and its makhraj that are correct from parts of mouth and the unity of coordinative sounds that produce sounds in morphemes arrangement, in one word that produces meaning. The result of phonological study has divided al-ashwat to be kinds of sound like the pronounced sounds, produced sounds from mouth, and heard sound.

Transient oxidation of Al-deposited Fe-Cr-Al alloy foil

International Nuclear Information System (INIS)

Andoh, A.

1997-01-01

The oxide phases formed on an Al-deposited Fe-Cr-Al alloy foil and an Fe-Cr-Al alloy foil of the same levels of Al and (La+Ce) contents, and their oxidation kinetics have been studied in air at 1173 and 1373 K using TGA, XRD and SEM. Al deposition promotes the growth of metastable aluminas (θ-Al 2 O 3 , γ-Al 2 O 3 ). Scales consisting of θ-Al 2 O 3 and a small amount of α-Al 2 O 3 develop on the Al-deposited foil at 1173 K and exhibit the whisker-type morphology. In the early stage of oxidation at 1373 K, thick scales consisting of θ-Al 2 O 3 and α-Al 2 O 3 grow rapidly on the Al-deposited foil. The transformation from θ-Al 2 O 3 to α-Al 2 O 3 is very fast, and the scales result in only α-Al 2 O 3 . In contrast, α-Al 2 O 3 scales containing a minor amount of FeAl 2 O 4 develop on the alloy foil. The growth rate of α-Al 2 O 3 scales on the Al-deposited foil is smaller than that on the alloy foil and very close to that on NiAl at 1373 K. (orig.)

Inmunodeficiencias humorales: Un estudio en tres Centros de Inmunología Clínica de adultos en la Ciudad de Buenos Aires Antibody deficiencies: A survey from three Clinical Immunology Centers for adults in Buenos Aires City

Directory of Open Access Journals (Sweden)

Diego S. Fernández Romero

2011-08-01

Full Text Available Las inmunodeficiencias humorales (IDH comprenden a un grupo de enfermedades caracterizadas por la imposibilidad de desarrollar una respuesta inmune efectiva mediada por anticuerpos. Estos pacientes presentan infecciones, principalmente por bacterias extracelulares capsuladas, del tracto respiratorio. El objetivo de nuestro estudio fue describir las características clínicas de una población de 128 pacientes derivados con sospecha o diagnóstico de IDH a tres centros para inmunodeficiencias de adultos, asistidos entre junio de 2004 y diciembre de 2009. Tres (2.3% consultaron por infecciones recurrentes en una sola oportunidad sin datos suficientes para su adecuada clasificación y fueron excluidos del estudio. De los 125 pacientes restantes, en 21 (16.8% se descartó IDH, en 8 (6.4% se diagnosticó inmunodeficiencia humoral secundaria (IDHS y en 96 (76.8% inmunodeficiencia humoral primaria (IDHP. Las causas de IDHS fueron: en un caso enfermedad renal, en uno uso de fenitoína, dos casos: gammapatía monoclonal y en 4 linfoma B. Las causas de las 96 IDHP fueron: 57 inmunodeficiencia común variable, 12 agammaglobulinemia ligada al cromosoma X, 10 deficiencia selectiva de IgA, 7 deficiencia de IgG1, 3 síndrome hiper-IgM, 3 deficiencia de IgM, 2 síndrome linfoproliferativo ligado al cromosoma X, un síndrome de Good y una deficiencia funcional de anticuerpos. Sesenta y siete pacientes estaban en seguimiento en el momento de la finalización del estudio, 25 de ellos estaban en seguimiento al iniciarse el estudio. De los 58 pacientes en seguimiento con indicación de tratamiento sustitutivo con gammaglobulina, 54 se encontraban en tratamiento al finalizar el estudio. En cuatro pacientes no se pudo confirmar el diagnóstico de IDHP.Antibody deficiency (AD comprises a group of diseases characterized by the inability to develop an effective antibody mediated immune response. These patients suffer mainly of encapsulated extracellular bacterial

LA PRÁCTICA TURÍSTICA COMO MECANISMO DE TRANSMISIÓN DE VALORES: CATALUÑA Y LOS LUGARES DE MEMORIA DEMOCRÁTICA

Directory of Open Access Journals (Sweden)

David González-Vázquez

2014-10-01

Full Text Available Desde la década de los 80, Europa asiste a un auténtico auge de la valorización de sus lugares de memoria. Calificados sumariamente como aquellos espacios vinculados al recuerdo trágico de un pasado reciente, tienen en los lugares testimonio de las dos guerras mundiales y el holocausto sus elementos más protagónicos. La trayectoria de los lugares de memoria en España ha seguido otro camino, pues el desenlace de la Guerra Civil y las cuatro décadas de dictadura supusieron el establecimiento de un paradigma memorial diametralmente opuesto al de las democracias occidentales. Con la entrada al S.XXI, España ha acabado de dirigir dicho paradigma hacia posiciones más estandarizadas a nivel internacional, lo que ha supuesto una relativa valorización patrimonial de la memoria histórica. El caso catalán, con la creación de una red de lugares memoriales ligada a un discurso histórico y a una estrategia de valorización turística, ha sido precursor en España.El presente artículo analiza el estado actual de las prácticas turísticas ligadas a los lugares de memoria en Cataluña. Tomando como referencia el caso francés, auténtico referente a nivel internacional y forjador del propio término de turismo de memoria, el análisis de los elementos más representativos del modelo catalán permitirá establecer cuáles son los principales rasgos definitorios de esta nueva tipología turística que, dentro del turismo cultural, está llamada a ser una referencia.

Proton irradiation studies on Al and Al5083 alloy

Science.gov (United States)

Bhattacharyya, P.; Gayathri, N.; Bhattacharya, M.; Gupta, A. Dutta; Sarkar, Apu; Dhar, S.; Mitra, M. K.; Mukherjee, P.

2017-10-01

The change in the microstructural parameters and microhardness values in 6.5 MeV proton irradiated pure Al and Al5083 alloy samples have been evaluated using different model based techniques of X-ray diffraction Line Profile Analysis (XRD) and microindendation techniques. The detailed line profile analysis of the XRD data showed that the domain size increases and saturates with irradiation dose both in the case of Al and Al5083 alloy. The corresponding microstrain values did not show any change with irradiation dose in the case of the pure Al but showed an increase at higher irradiation doses in the case of Al5083 alloy. The microindendation results showed that unirradiated Al5083 alloy has higher hardness value compared to that of unirradiated pure Al. The hardness increased marginally with irradiation dose in the case of Al5083, whereas for pure Al, there was no significant change with dose.

Derechos Humanos: Del Iusnaturalismo clásico al Iusnaturalismo moderno

Directory of Open Access Journals (Sweden)

Elías Castro Blanco

2010-07-01

Full Text Available Indagar por la naturaleza de los derechos implica ante todo aclarar el sentido de esta expresión, en función de las siguientes consideraciones: ¿son los derechos asuntos concernientes a la naturaleza o la cultura?, ¿existen derechos en la naturaleza?, en sentido estricto ¿qué es naturaleza?, ¿qué significa la expresión,derechos naturales? Estas serán las preguntas orientadoras que formarán parte de la discusión expuesta en el presente capítulo, partiendo de una reflexión iusnaturalista clásica, ligada a las concepciones de igualdad y desigualdad de la naturaleza humana. Posteriormente se hará una breve exégesis del iusnaturalismo clásico a un iusnaturalismo teológico, en la versión de Pico Della Mirandola, para llegar finalmente a una concepción antropológica de naturaleza humana, basada en la idea de dignidad -a la manera kantiana- la que ha asumido la modernidad para sustentar la existencia de los Derechos Humanos.

PEMBARUAN MASLAḤAH DALAM MAQĀṢID AL- SHARĪ‘AH: TELAAH HUMANISTIS TENTANG AL-KULLIYYĀT AL-KHAMSAH

Directory of Open Access Journals (Sweden)

Zaenuddin Mansyur

2012-06-01

Full Text Available Abstract:   In order to answer a variety of issues faced by human being in the current era, such as human rights abuses, social disintegration, and terrorism, the renewal of Islamic law in the level of theoretical and practical aspects is very urgent. This paper aims to examine one of the Islamic legal reform efforts, namely to build a more technical understanding of the concept of maṣlaḥah contained in the maqāṣīd sharī‘ah, called the al-kulliyat al-khamsah. Therefore, the concept of maṣlaḥah in ḥifẓ al-dīn is technically defined as al-ḥurriyah al-i‘tiqād (freedom of religion and schools; in ḥifẓ al-nafs as al-karamat al-insān (human being breeding; in ḥifẓ al-nasl as ḥifẓ al-usrah (wholeness and harmony of the family; in ḥifẓ al-māl as al-taḍammun al-insān (social solidarity , and in ḥifẓ al-‘aql as al-ḥuqūq as al-tarbiyāt (increasing human resources quality.Abstrak: Demi menjawab aneka persoalan zaman yang dihadapi manusia era sekarang, seperti penyelewengan terhadap HAM, disintegrasi sosial, dan terorisme, maka pembaharuan hukum Islam dalam tataran teoretis dan praktis urgen dilakukan. Tulisan ini bertujuan untuk mengkaji salah satu upaya pembaruan hukum Islam, yaitu membangun pemahaman yang lebih teknis terhadap konsep maṣlaḥah yang terkandung dalam maqāṣīd sharī‘ah, yang disebut dengan al-kulliyāt al-khamsah. Oleh karena itu, konsep maṣlaḥah dalam ḥifẓu al-dīn secara teknis dimaknai sebagai ḥurriyah al-i‘tiqād (kebebasan untuk beragama dan beraliran; dalam ḥifẓu al-nafs sebagai al-karāmāt al-insān (pemuliaan kemanusiaan; dalam ḥifẓu al-nasl sebagai ḥifẓu al-usrah (keutuhan dan keharmonisan keluarga; dalam ḥifẓu al-māl sebagai al-taḍammun al-insān (solidaritas sosial; dan dalam ḥifẓu al-‘aql sebagai al-ḥuqūq al-tarbiyāt (peningkatan sumber daya manusia.

Combustion synthesis of AlB2-Al2O3 composite powders with AlB2 nanowire structures

Science.gov (United States)

Yang, Pan; Xiao, Guoqing; Ding, Donghai; Ren, Yun; Yang, Shoulei; Lv, Lihua; Hou, Xing

2018-05-01

Using of Al and B2O3 powders as starting materials, and Mg-Al alloy as additives, AlB2-Al2O3 composite powders with AlB2 nanowire structures were successfully fabricated via combustion synthesis method in Ar atmosphere at a pressure of 1.5 MPa. The effect of different amount of Mg-Al alloy on the phase compositions and morphology of the combustion products was investigated. The results revealed that AlB2 and Al2O3 increased, whereas Al decreased with the content of Mg-Al alloy increasing. The impurities MgAl2O4 and AlB12 would exist in the sample with adding of 18 wt% Mg-Al alloy. Interestingly, FESEM/TEM/EDS results showed that AlB2 nanowires were observed in the products when the content of Mg-Al alloy is 6 wt% and 12 wt%. The more AlB2 nanowires can be found as the content of Mg-Al alloy increased. And the yield of AlB2 nanowires with the diameter of about 200 nanometers (nm) and the length up to several tens of micrometers (μm) in the combustion product is highest when the content of Mg-Al alloy is 12 wt%. The vapor, such as Mg-Al (g), B2O2 (g), AlO (g) and Al2O (g), produced during the process of combustion synthesis, reacted with each other to yield AlB2 nanowires by vapor-solid (VS) mechanism and the corresponding model was also proposed.

The effects of boron in TiAl/Ti3Al

International Nuclear Information System (INIS)

Feng, C.R.; Michel, D.J.; Crowe, C.R.

1989-01-01

The authors discuss the TiAl/Ti 3 Al interfacial misfit dislocations structures investigated by TEM in Ti-45Al alloy and Ti-45Al/TiB 2 composite. For TiAl with c/a = 1.02, only a single set of misfit dislocation arrays are crystallographically possible; these were observed in Ti-45Al alloy. However, the observation of three sets of misfit dislocation arrays in the Ti-45Al/TiB 2 composite suggests that the occupation of octahedral sites in the TiAl structure by excess boron was responsible for a decrease in the c/a ratio leading to an increased fcc character of the TiAl at the TiAl/Ti 3 Al interface

In Situ Fabrication of AlN Coating by Reactive Plasma Spraying of Al/AlN Powder

Directory of Open Access Journals (Sweden)

Mohammed Shahien

2011-10-01

Full Text Available Reactive plasma spraying is a promising technology for the in situ formation of aluminum nitride (AlN coatings. Recently, it became possible to fabricate cubic-AlN-(c-AlN based coatings through reactive plasma spraying of Al powder in an ambient atmosphere. However, it was difficult to fabricate a coating with high AlN content and suitable thickness due to the coalescence of the Al particles. In this study, the influence of using AlN additive (h-AlN to increase the AlN content of the coating and improve the reaction process was investigated. The simple mixing of Al and AlN powders was not suitable for fabricating AlN coatings through reactive plasma spraying. However, it was possible to prepare a homogenously mixed, agglomerated and dispersed Al/AlN mixture (which enabled in-flight interaction between the powder and the surrounding plasma by wet-mixing in a planetary mill. Increasing the AlN content in the mixture prevented coalescence and increased the nitride content gradually. Using 30 to 40 wt% AlN was sufficient to fabricate a thick (more than 200 µm AlN coating with high hardness (approximately 1000 Hv. The AlN additive prevented the coalescence of Al metal and enhanced post-deposition nitriding through N₂ plasma irradiation by allowing the nitriding species in the plasma to impinge on a larger Al surface area. Using AlN as a feedstock additive was found to be a suitable method for fabricating AlN coatings by reactive plasma spraying. Moreover, the fabricated coatings consist of hexagonal (h-AlN, c-AlN (rock-salt and zinc-blend phases and certain oxides: aluminum oxynitride (Al₅O₆N, cubic sphalerite Al₂₃O₂₇N₅ (ALON and Al₂O₃. The zinc-blend c-AlN and ALON phases were attributed to the transformation of the h-AlN feedstock during the reactive plasma spraying. Thus, the zinc-blend c-Al

Instability of TiC and TiAl3 compounds in Al-10Mg and Al-5Cu alloys by addition of Al-Ti-C master alloy

Institute of Scientific and Technical Information of China (English)

无

2006-01-01

The performance of Al-Ti-C master alloy in refining Al-10Mg and A1-5Cu alloys was studied by using electron probe micro-analyzer (EPMA) and X-ray diffractometer (XRD) analysis.The results indicate that there are obvious fading phenomena in both Al-10Mg and Al-5Cu alloys with the addition of Al-5Ti-0.4C refiner which contains TiC and TiAl3 compounds.Mg element has no influence on the stability of TiC and TiAl3, while TiC particles in Al-10Mg alloy react with Al to form Al4C3 particles, resulting in the refinement fading.However, TiC particles are relatively stable in Al-5Cu alloy, while TiAl3 phase reacts with Al2Cu to produce a new phase Ti(Al, Cu)2, which is responsible for the refinement fading in Al-5Cu alloy.These indicate that the refinement fading will not occur only when both the TiC particles and TiAl3 compound of Al-Ti-C refiner are stable in Al alloys.

PEMAHAMAN HADITS TARBAWI BURHAN AL ISLAM AL ZARNUJI DALAM KITAB TA’LIM AL MUTA’ALLIM

Directory of Open Access Journals (Sweden)

Benny Afwadzi

2017-01-01

Full Text Available This paper explores the understanding of tarbawi (education hadith from one of the major influential clerics in the Islamic educational system, especially in pesantren. He is Burhan al Islam al Zarnuji with his landmark book Ta’lim al Muta’allim. The conclusion that can be drawn is that al Zarnuji has shades of sufistical view in understanding tarbawi hadith. This can be seen in his understanding of hadith on obligation to seek knowledge (thalab al ilmi faridhatun ‘ala kulli muslimin wa muslimatin, which is interpreted as ilm al hal, the science concerning the condition of the human religious or simplistically said as the religious sciences; and the hadith of intention of studying (innama al a’malu bi al niyyat with the intention for the sake of the hereafter and religion, not mundane. Such an understanding is not something taken for granted, but it can be reinterpreted and perfected in accordance with the spirit of the times of context.

Calculation of Gibbs energy of Zr-Al-Ni, Zr-Al-Cu, Al-Ni-Cu and Zr-Al-Ni-Cu liquid alloys based on quasiregular solution model

International Nuclear Information System (INIS)

Li, H.Q.; Yang, Y.S.; Tong, W.H.; Wang, Z.Y.

2007-01-01

With the effects of electronic structure and atomic size being introduced, the mixing enthalpy as well as the Gibbs energy of the ternary Zr-Al-Cu, Ni-Al-Cu, Zr-Ni-Al and quaternary Zr-Al-Ni-Cu systems are calculated based on quasiregular solution model. The computed results agree well with the experimental data. The sequence of Gibbs energies of different systems is: G Zr-Al-Ni-Cu Zr-Al-Ni Zr-Al-Cu Cu-Al-Ni . To Zr-Al-Cu, Ni-Al-Cu and Zr-Ni-Al, the lowest Gibbs energy locates in the composition range of X Zr 0.39-0.61, X Al = 0.38-0.61; X Ni = 0.39-0.61, X Al = 0.38-0.60 and X Zr = 0.32-0.67, X Al = 0.32-0.66, respectively. And to the Zr-Ni-Al-Cu system with 66.67% Zr, the lowest Gibbs energy is obtained in the region of X Al = 0.63-0.80, X Ni = 0.14-0.24

Bipolar characteristics of AlGaN/AlN/GaN/AlGaN double heterojunction structure with AlGaN as buffer layer

International Nuclear Information System (INIS)

Peng, Enchao; Wang, Xiaoliang; Xiao, Hongling; Wang, Cuimei; Yin, Haibo; Chen, Hong; Feng, Chun; Jiang, Lijuan; Hou, Xun; Wang, Zhanguo

2013-01-01

Highlights: •2DEG and 2DHG coexist in the AlGaN/AlN/GaN/AlGaN DH-structure. •The sheet densities of 2DEG and 2DHG vary with buffer Al content and GaN thickness. •The conditions for the disappearance of 2DHG are discussed. •Increasing buffer Al content provides better electron confinement. •Dislocation scattering is reduced in the DH-structure. -- Abstract: This is a theoretical study of AlGaN/AlN/GaN/AlGaN double heterojunction (DH) structure with AlGaN as buffer layer. Our calculation shows that as the buffer Al content increases, though two-dimensional electron gas (2DEG) sheet density decreases, the channel back-barrier caused by polarization-induced electric field in GaN provides better electron confinement. And under certain conditions the DH-structure shows bipolar characteristics, with an additional two-dimensional hole gas (2DHG) formed at GaN/AlGaN interface. The influence of the buffer Al content and GaN channel thickness on the 2DEG and 2DHG sheet densities are investigated, and the conditions for the disappearance of 2DHG are discussed. Also, the mobility inhibited by dislocation scattering is enhanced in DH-structure due to the enhancement of screening effect of the 2DEG

The code of light: al-ghazali and al-suhrawardi

OpenAIRE

Gediminaitė, Barbora

2017-01-01

The Code of Light: Al-Ghazali and Al-Suhrawardi The Bachelor’s thesis The Code of Light in Islam: al-Ghazali and al-Suhrawardi presents a comparative study of light. The study analyses the philosophical systems of al-Ghazali and al-Suhrawardi through the reconstruction of the image of light and its operation principles. The main subject of the thesis are the attributes of light. The main problem of the research is the semantics and contextuality of light in Islamic theology and philosophy. Th...

Pemikiran Filosofis Sadra Dalam Tafsir Al-Qur’an Al-Karim : Surah Al-’A‘la

Directory of Open Access Journals (Sweden)

Kerwanto Kerwanto

2014-12-01

Full Text Available Abstrak : Dalam tafsir atas Surah al-’A‘lā, Mulla Sadra, melalui karyanya Tafsīr al Qur’ān al-Karīm, mengajak jiwa kita berpetualang menuju lapisan makna terdalam untuk mengenali realitas ketauhidan (al- mabdā’, kenabian (shirāth atau nubuwwah dan kebangkitan (ma‘ād dan mengulasnya secara filosofis. Penelitian ini merupakan suatu upaya untuk menggali manfaat dari aspek-aspek penting dari sumber-sumber keagamaan yang tergali dari petunjuk al Qur’an yang berpadu dengan prinsip- prinsip rasional filosofis dan pengalaman mistik (intuitif Sadra. Setiap bab pada tafsir ini diberikan judul dengan tasbīḥ (pernyataan pemujian dan pensucian, dengan tetap memaparkan beragam pokok persoalan terkait metafisika al-Qur’an. Prinsip-prinsip filosofis yang digunakan dalam risalah tafsir ini bisa menjadi salah satu bukti ketidakberjarakan antara filsafat dengan teks-teks keagamaan. Sadra menggunakan metode tafsir yang tetap menerima sisi lahiriah al-Qur’an, dan selanjutnya mencari misteri-misteri, rahasia-rahasia, dan dengan bantuan intelek (akal, intuisi dan iluminasi Tuhan untuk memperoleh realitas-realitas dan makna- makna dibalik selaput ekternalnya (aspek literalnyaKata kunci : Ḥikmah Muta’āliyah, irfan, al-mabdā’, kebangkitan setelah mati, nubuwwah, takwīl, gerak substansial (ḥarakah jawhariyyah, denotasi utama (al-maqshūd al-ashlī, penyempurnaan diri (takammul, tasbīḥ.  Abstract : In his commentary on Surah al-’ A‘lā, Mulla Sadra, through his Tafsīr al-Qur’ān al-Karīm invites our souls to ventureinto the deepest layers of meaning to recognize the reality of Divinity (al- mabdā’, prophethood (Ṣirāṭ or nubuwwah and resurrection (ma‘ād and discusses it in a more philosophical manner. This study is an attempt to explore the benefits of these important aspects of religious sources unearthed from Qur’anic injunctions combined with rational principles of philosophical and mystical experiences

A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

International Nuclear Information System (INIS)

Ma Xiaoguang; Liu Xiangfa; Ding Haimin

2009-01-01

Because flake-like TiAl 3 particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl 3 particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of α-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption

Efeitos da derivação ileocólica e da exclusão total do íleo terminal na morfologia e nas funções de fígado, rins e íleo terminal de ratos submetidos a ligadura do ducto hepático comum

OpenAIRE

Evandro Luis de Oliveira Costa

2011-01-01

As doenças colestáticas e sua evolução para fibrose e cirrose são muito conhecidas. Apesar do incremento de terapias, como o transplante hepático, esse grupo de afecções, ainda representa desafio na prática médica, desde o diagnóstico até o tratamento, além de estarem ligadas a morbidade e letalidade altas, com custos de tratamento elevados. Novas condutas e busca dos mecanismos fisiopatológicos envolvidos são ampliados a cada dia. Este trabalho tem por objetivos avaliar a influência e os efe...

Efeitos da derivação ileocólica e da exclusão do íleo terminal na morfologia e nas funções de fígado, rins e íleo terminal de ratos submetidos a ligadura do ducto hepático comum

OpenAIRE

Evandro Luis de Oliveira Costa

2013-01-01

As doenças colestáticas e sua evolução para fibrose e cirrose são muito conhecidas. Apesar do incremento de terapias, como o transplante hepático, esse grupo de afecções, ainda representa desafio na prática médica, desde o diagnóstico até o tratamento, além de estarem ligadas a morbidade e letalidade altas, com custos de tratamento elevados. Novas condutas e busca dos mecanismos fisiopatológicos envolvidos são ampliados a cada dia. Este trabalho tem por objetivos avaliar a influência e os efe...

Creación de una empresa de recogida selectiva y gestión de aceite vegetal usado

OpenAIRE

Iribarren García, Iñigo

2010-01-01

Este proyecto trata sobre la creación de una empresa donde todo va a girar en torno a un producto principal: el aceite vegetal usado. A partir de ahí, en la empresa aparecen cuatro líneas de negocio independientes y a la vez relacionadas, que directa o indirectamente están ligadas con el aceite usado. Las cuatro líneas de trabajo van a ser una parte referente al servicio de recogida del aceite, actuación de la cual derivan otras dos de las cuatro líneas de negocio, como son la venta del aceit...

Definición y cálculo de la capacidad ambiental de una vía urbana

OpenAIRE

Aguilar Rovira, Mª del Mar

2005-01-01

Durante décadas se ha trabajado en las ciudades con volúmenes de tráfico relacionados con la capacidad física de los carriles destinados a la circulación, entendida como la máxima utilización del espacio viario disponible. La capacidad física va ligada al detrimento de necesidades de espacio para peatones, cilcistas y pasajeros de autobuses, además de contribuir a la contaminación atmosférica, acústica y a la accidentalidad que atenta contra la calidad y la movilidad urbana. Por eso define...

Análisis microeconometrico de las decisiones de participación y gasto turístico de los hogares

OpenAIRE

Mateo Erroz, Sara

2012-01-01

La tesis se enmarca en el análisis microeconométrico de la demanda turística de los hogares españoles. Su objetivo general es estudiar los determinantes que influyen en la decisión de consumo turístico, frecuencia de consumo y gasto de los hogares en servicios turísticos. En el análisis de todas las decisiones intervienen variables no estrictamente económicas específicas de cada hogar (número de miembros, existencia de niños y otras variable ligadas al ciclo de vida del hogar) y de sus mi...

¿Cómo un liderazgo pedagógico y distribuido mejora los logros académicos? Revisión de la investigación y propuesta

OpenAIRE

ANTONIO BOLÍVAR-BOTÍA

2010-01-01

El artículo hace una revisión de la literatura y de algunas de las experiencias internacionales más recientes sobre cómo el liderazgo pedagógico constituye un factor relevante en la mejora de resultados de los establecimientos educativos. A su vez, presenta un diseño metodológico de investigación para analizar, por un lado, los factores y variables ligadas al liderazgo pedagógico que ejercen un impacto sobre los aprendizajes del alumnado y, por otro, qué buenas prácticas de liderazgo, no limi...

Tzompantli, horca y picota: Sacrificio o pena capital

OpenAIRE

Carreón Blaine, Emilie

2006-01-01

En este artículo me refiero a una faceta del proceso de aculturación del México antiguo, la manifestación pública de violencia corporal ligada al castigo, la pena de muerte y la exposición de partes del cuerpo humano, como se representa en los mapas de las Relaciones geográficas del siglo XVI, donde la frontera entre el lugar de castigo y el lugar de sacrificio se desvanece. El estudio de dicho aspecto de la sociedad colonial permite entender el proceso mediante el cual las prácticas sacrific...

Ciencia, tecnología y desarrollo

Directory of Open Access Journals (Sweden)

Tomás V. Unger

2015-01-01

Full Text Available En América Latina el escribir sobre ciencia comparte una responsabilidad: el desarrollo tecnológico que piden todos los países del Tercer Mundo. Es función del periodismo científico crear interés en la ciencia, propugnar su difusión y apuntalar su enseñanza,función que está íntimamente ligada al desarrollo, pues sin ciencia y tecnología no es posible alcanzarlo. La ciencia consiste en llegar al por qué de las cosas y deducir reglas generales con las cuales se pueda predecir fenómenos que aún no han ocurrido. Esto a su vez permite crear procesos, primero de laboratorio, luego industriales, que devienen en tecnologías de producción,

Liquidus projection of the Nb-Cr-Al system near the Al3(Nb,Cr) + Cr(Al,Nb) eutectic region

International Nuclear Information System (INIS)

Souza, S.A.; Ferrandini, P.L.; Nunes, C.A.; Coelho, A.A.; Caram, R.

2006-01-01

The system Nb-Cr-Al was investigated in the region near the Al 3 (Nb,Cr) + Cr(Al,Nb) eutectic and the liquidus projection of that region was determined based on the microstructural characterization of arc melted alloys. The characterization utilized scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), differential thermal analysis (DTA) and X-ray diffraction (XRD). The results allowed one to determine three primary solidification liquidus surfaces ((Cr,Al) 2 Nb, Cr(Al,Nb) and Al 3 (Nb,Cr)), that are originated from the binary systems Cr-Nb, Cr-Al and Al-Nb. It is proposed the occurrence of the invariant reaction L + (Cr,Al) 2 Nb ↔ Al 3 (Nb,Cr) + Cr(Al,Nb) and of a point of minimum, which involves a three phase reaction, L ↔ Al 3 (Nb,Cr) + Cr(Al,Nb). All alloys studied showed formation of the Al 3 (Nb,Cr) + Cr(Al,Nb) eutectic as the last solidification step with Al(Nb)Cr 2 precipitating from Cr(Al,Nb)

A united refinement technology for commercial pure Al by Al-10Ti and Al-Ti-C master alloys

Energy Technology Data Exchange (ETDEWEB)

Ma Xiaoguang [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn; Ding Haimin [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan 250061 (China)

2009-03-05

Because flake-like TiAl{sub 3} particles in Al-Ti-C master alloys prepared in a melt reaction method dissolve slowly when they are added into Al melt at 720 deg. C, Ti atoms cannot be released rapidly to play the assistant role of grain refinement, leading to a poor refinement efficiency of Al-Ti-C master alloys. A united refinement technology by Al-10Ti and Al-Ti-C master alloys was put forward in this paper. The rational combination of fine blocky TiAl{sub 3} particles in Al-10Ti and TiC particles in Al-Ti-C can improve the nucleation rate of {alpha}-Al. It not only improves the grain refinement efficiency of Al-Ti-C master alloys, but also reduces the consumption.

United modification of Al-24Si alloy by Al-P and Al-Ti-C master alloys

Institute of Scientific and Technical Information of China (English)

韩延峰; 刘相法; 王海梅; 王振卿; 边秀房; 张均艳

2003-01-01

The modification effect of a new type of Al-P master alloy on Al-24Si alloys was investigated. It is foundthat excellent modification effect can be obtained by the addition of this new type of A1-P master alloy into Al-24Simelt and the average primary Si grain size is decreased below 47 μm from original 225 μm. It is also found that theTiC particles in the melt coming from Al8Ti2C can improve the modification effect of the Al-P master alloy. Whenthe content of TiC particles in the Al-24Si melt is 0.03 %, the improvement reaches the maximum and keeps steadywith increasing content of TiC particles. Modification effect occurs at 50 min after the addition of the Al-P master al-loy and TiC particles, and keeps stable with prolonging holding time.

Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling

Science.gov (United States)

Yu, Hailiang; Lu, Cheng; Tieu, A. Kiet; Li, Huijun; Godbole, Ajit; Kong, Charlie

2018-06-01

The roll bonding technique is one of the most widely used methods to produce metal laminate sheets. Such sheets offer interesting research opportunities for both scientists and engineers. In this paper, we report on an experimental investigation of the 'thickness effect' during laminate rolling for the first time. Using a four-high multifunction rolling mill, Cu/Al/Cu laminate sheets were fabricated with a range of thicknesses (16, 40, 70 and 130 μm) of the Al layer. The thickness of the Cu sheets was a constant 300 μm. After rolling, TEM images show good bonding quality between the Cu and Al layers. However, there are many nanoscale pores in the Al layer. The fraction of nanoscale pores in the Al layer increases with a reduction in the Al layer thickness. The finite element method was used to simulate the Cu/Al/Cu rolling process. The simulation results reveal the effect of the Al layer thickness on the deformation characteristics of the Cu/Al/Cu laminate. Finally, we propose that the size effect of the Al layer thickness during Cu/Al/Cu laminate rolling may offer a method to fabricate 'nanoporous' Al sandwich laminate foils. Such foils can be used in electromagnetic shielding of electrical devices and noisy shielding of building.

Structural stability and electronic properties of AlCu3, AlCu2Zr in AlZr3: Stabilnost strukture in elektronske lastnosti AlCu3, AlCu2Zr in AlZr3:

OpenAIRE

Cheng, Rong; Wu, Xiao-Yu

2013-01-01

First-principles calculations were performed to study the alloying stability and electronic structure of the Al-based intermetallic compounds AlCusub3, AlCusub{2}Zr and AlZrsub3. The results show that the lattice parameters obtained after the full relaxation of the crystalline cells are consistent with the experimental data, and these intermetallics have a strong alloying ability and structural stability due to their negative formation energies and their cohesive energies. A further analysis ...

/Cu-Al System

Science.gov (United States)

Kish, Orel; Froumin, Natalya; Aizenshtein, Michael; Frage, Nachum

2014-05-01

Wettability and interfacial interaction of the Ta2O5/Cu-Al system were studied. Pure Cu does not wet the Ta2O5 substrate, and improved spreading is achieved when relatively a high fraction of the active element (~40 at.% Al) was added. The Al2O3 and AlTaO4 phases were observed at the Ta2O5/Cu-Al interface. A thermodynamic evaluation allowed us to suggest that the lack of wetting bellow 40 at.% Al is due to the presence of a native oxide, which covers the drop. The conditions of the native oxide decomposition and the formation of the volatile Al2O suboxide strongly depend on the vacuum level during sessile drop experiments and the composition of the Cu-Al alloy. In our case, Al contents greater than 40% provides thermodynamic conditions for the formation of Al2O (as a result of Al reaction with Al2O3) and the drop spreading. It was suggested that the final contact angle in the Ta2O5/Cu-Al system (50°) is determined by Ta adsorption on the newly formed alumina interlayer.

Metodologi Kitab Ma‘alim al-Tanzil Karya Al-Bagawiy

Directory of Open Access Journals (Sweden)

M. Rusydi Khalid

2017-12-01

This study aims to describe the metodology of Ma'a> lim al-tanzi>l book by al-Bagawi. The book is one of the books of exegesis written on the basis of hadith, which by the commentary scholars recognized avoided from heresy and weak hadith. The author of this book is Imam Abu Humaid Hussein bin Mas‘u>d al-Farra>’ Al-Bagawi al-Syafi‘i>, died in the year 510 H. This exegesis book combines the interpretation of the companions, tabi‘i>n, and tabi‘i> tabi‘i>n. Interpretation is broken down with easy, simple, and concise diction choices. The stoning of the interpretation of the salaf scholars without mentioning the sanad as already mentioned in the introduction to his book. This book was first printed in one edition with the exegesis book of Ibn Kas}i>r and al-kha>zin. This book interprets the Qur'an analytically from the beginning to the end of the surah by using the method of interpretation based on the hadith, namely by mentioning the arguments of the hadith sahih, the fatwa of the companions and the tabi‘i>n. The characteristic or purpose of this book is fiqh oriented, which tends to the Shafi‘i fiqh.   Abstrak Tulisan ini mendeskripsikan metode penafsiran dalam kitab Ma’a>lim al-tanzi>l karya al-bagawi. Kitab tafsir ini merupakan salah satu di antara kitab-kitab tafsir yang ditulis berdasarkan riwayat, yang oleh para ulama tafsir diakui terhindar dari bid’ah dan hadis dhaif (lemah. Penulis buku ini adalah Imam Abu Muhammad Husain bin Mas‘u>d al-Farra>‘ al-Bagawi al-Syafi‘i>, wafat pada tahun 510 H. Kitab ini adalah kitab pertengahan yang mengutip penafsiran para Sahabat, ta>bi‘i>n, dan tabi‘i ta>bi‘i>n. Penafsiran diuraikan dengan pilihan diksi yang mudah, sederhana, dan ringkas. Penukilan dari interpretasi ulama salaf tanpa menyebutkan sanad karena telah disebutkan dalam pendahuluan bukunya. Buku ini pertama kali dicetak dalam satu edisi dengan tafsir Ibn Kas\\i>r dan tafsir al-Kha>zin. Kitab ini menafsirkan al-Qur’an secara

Desarrollo de la personalidad y virtudes sociales: relaciones en el contexto educativo familiar

Directory of Open Access Journals (Sweden)

Consuelo Martínez-Priego

2014-12-01

Full Text Available La multiculturalidad ha conducido al replanteamiento de la problemática de la consistencia social; es decir, la cohesión entre los diversos miembros de la sociedad. Para abordar el problema educativo, pueden estudiarse las condiciones psicológicas y pedagógicas ligadas todas ellas al contexto familiar. Son las condiciones familiares -los estilos y dinámicas familiares- las que posibilitan un desarrollo armónico de la personalidad que permita la sociabilidad. Por otro lado, son los vínculos familiares también, la condición para el desarrollo de virtudes que han venido a denominarse "sociales". El objetivo de este trabajo es, precisamente, describir los nexos que vinculan la educación familiar con las dos variables indicadas: el desarrollo de la personalidad y el crecimiento de las virtudes que favorecen la consistencia social. Se hacen también observaciones que apuntan al nexo real existente entre personalidad y desarrollo de las virtudes.

Las cosas que se llevan en la mochila: El poder en comunidades de okupación rural españolas

Directory of Open Access Journals (Sweden)

María Teresa Ramírez

2013-07-01

Full Text Available En este texto presento algunas reflexiones sobre los discursos que buscan generar una alternativa al modelohegemónico propuesto por el neoliberalismo. Para esto, me centro en el discurso sobre el poder de un grupo depersonas vinculadas al movimiento de okupación rural español. Comienzo desde las motivaciones que tienen laspersonas de este grupo para buscar una forma de vida cotidiana alternativa a la hegemónica, y las dificultades,centradas en la propia comunidad, con las que se han encontrado para lograrlo. Desde aquí, expongo las concepcionesque tienen sobre el poder, utilizando como marco interpretativo la teoría de Foucault. Luego me centroen la forma en que este grupo busca superar estas dificultades, principalmente vinculada al “reconocimientoindividual” de las emociones. Sobre este punto termino con algunas reflexiones críticas ligadas a conceptoscomo tecnologías del yo y subjetivación.

ALS Association

Science.gov (United States)

... toward a world without ALS! Walk to Defeat ALS® Walk to Defeat ALS® draws people of all ... We need your help. I Will Advocate National ALS Registry The National ALS Registry is a congressionally ...

AlN nanoparticle-reinforced nanocrystalline Al matrix composites: Fabrication and mechanical properties

International Nuclear Information System (INIS)

Liu, Y.Q.; Cong, H.T.; Wang, W.; Sun, C.H.; Cheng, H.M.

2009-01-01

To improve the specific strength and stiffness of Al-based composites, AlN/Al nanoparticles were in-situ synthesized by arc plasma evaporation of Al in nitrogen atmosphere and consolidated by hot-pressing to fabricate AlN nanoparticle-reinforced nanocrystalline Al composites (0-39 vol.% AlN). Microstructure characterization shows that AlN nanoparticles homogeneously distribute in the matrix of Al nanocrystalline, which forms atomically bonded interfaces of AlN/Al. The hardness and the elastic modulus of the nanocomposite have been improved dramatically, up to 3.48 GPa and 142 GPa, respectively. Such improvement is believed to result from the grain refinement strengthening and the interface strengthening (load transfer) between the Al matrix and AlN nanoparticles

Comparison of one and two-neutron transfer near the Coulomb barrier for the 27Al(18O, 16O)29Al, 27Al(18O, 17O)28Al and 27Al(13C, 12C)28Al reactions

International Nuclear Information System (INIS)

Schiller, S.A.; Eck, J.S.

1975-01-01

Total reaction cross sections for the transfer reactions 27 Al( 18 O, 16 O) 29 Al, 27 Al( 18 O, 17 O) 28 Al and 27 Al( 13 C, 12 C) 28 Al are reported for center-of-mass energies between 13 and 20 MeV for 18 O projectiles and between 11 and 17.5 MeV for 13 C projectiles. The reaction products, 29 Al, and 28 Al, beta decay to 29 Si and 28 Si, respectively, and the subsequent γ decays of 29 Si and 28 Si were measured. Due to the relatively long beta decay half lives, data were taken in a beam-off mode, resulting in very clean spectra. Total cross sections were calculated and compared with a theoretical model for barrier penetration proposed by C.Y. Wong. Differences between 18 O induced one and two-neutron total transfer reaction cross sections are discussed. (orig.) [de

Al-matrix composite materials reinforced by Al-Cu-Fe particles

International Nuclear Information System (INIS)

Bonneville, J; Laplanche, G; Joulain, A; Gauthier-Brunet, V; Dubois, S

2010-01-01

Al-matrix material composites were produced using hot isostatic pressing technique, starting with pure Al and icosahedral (i) Al-Cu-Fe powders. Depending on the processing temperature, the final reinforcement particles are either still of the initial i-phase or transformed into the tetragonal ω-Al0 0.70 Cu 0.20 Fe 0.10 crystalline phase. Compression tests performed in the temperature range 293K - 823K on the two types of composite, i.e. Al/i and Al/ω, indicate that the flow stress of both composites is strongly temperature dependent and exhibit distinct regimes with increasing temperature. Differences exist between the two composites, in particular in yield stress values. In the low temperature regime (T ≤ 570K), the yield stress of the Al/ω composite is nearly 75% higher than that of the Al/i composite, while for T > 570K both composites exhibit similar yield stress values. The results are interpreted in terms of load transfer contribution between the matrix and the reinforcement particles and elementary dislocation mechanisms in the Al matrix.

Piezo-tunnel effect in Al/Al2O3/Al junctions elaborated by atomic layer deposition

Science.gov (United States)

Rafael, R.; Puyoo, E.; Malhaire, C.

2017-11-01

In this work, the electrical transport in Al/Al2O3/Al junctions under mechanical stress is investigated in the perspective to use them as strain sensors. The metal/insulator/metal junctions are elaborated with a low temperature process (≤200 °C) fully compatible with CMOS back-end-of-line. The conduction mechanism in the structure is found to be Fowler-Nordheim tunneling, and efforts are made to extract the relevant physical parameters. Gauge factors up to -32.5 were found in the fabricated devices under tensile stress. Finally, theoretical mechanical considerations give strong evidence that strain sensitivity in Al/Al2O3/Al structures originates not only from geometrical deformations but also from the variation of interface barrier height and/or effective electronic mass in the tunneling oxide layer.

Generation and evolution of nanoscale AlP and Al{sub 13}Fe{sub 4} particles in Al-Fe-P system

Energy Technology Data Exchange (ETDEWEB)

Qiao, Huan; Gao, Tong; Zhu, Xiangzhen; Wu, Yuying; Qian, Zhao; Liu, Xiangfa, E-mail: xfliu@sdu.edu.cn

2015-02-15

Highlights: • Diffusion and gradual solid reactions between Al and Fe{sub x}P phases in Al-Fe-P alloy were investigated. • Nanoscale AlP clusters are in-situ generated and evolve during the whole process. • This novel Al-Fe-P alloy has an excellent low-temperature refining performance on hypereutectic Al-Si alloy. - Abstract: In this paper, the gradual solid reactions between Al and Fe{sub x}P phases in Al-Fe-P alloy were investigated. The results show that the whole reaction process undergoes four main stages: the diffusion of Al atom, the generation of (Al, Fe, P) intermediate compound, the precipitation of nano AlP and Al{sub 13}Fe{sub 4} clusters and their growth to submicron particles. The microstructure of Fe-P particles evolves from the “egg-type”, the “sponge-type” to the “sesame-cake” structure. AlP and Al{sub 13}Fe{sub 4} nano phases have in-situ generated and evolved during the whole process. The gradual reaction mechanism has been discussed. Furthermore, a novel Al-Fe-P alloy which contains (Al, Fe, P) intermediate compounds and nano AlP particles has been synthesized and its low-temperature refining performance on A390 alloy has also been investigated.

Japanese version of the ALS-FTD-Questionnaire (ALS-FTD-Q-J).

Science.gov (United States)

Watanabe, Yasuhiro; Beeldman, Emma; Raaphorst, Joost; Izumi, Yuishin; Yoshino, Hiide; Masuda, Michihito; Atsuta, Naoki; Ito, Satoru; Adachi, Tadashi; Adachi, Yoshiki; Yokota, Osamu; Oda, Masaya; Hanashima, Ritsuko; Ogino, Mieko; Ichikawa, Hiroo; Hasegawa, Kazuko; Kimura, Hideki; Shimizu, Toshio; Aiba, Ikuko; Yabe, Hayato; Kanba, Makoto; Kusumi, Kimiyoshi; Aoki, Tetsuya; Hiroe, Yu; Watanabe, Hirohisa; Nishiyama, Kazutoshi; Nomoto, Masahiro; Sobue, Gen; Nakashima, Kenji

2016-08-15

Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) share common clinical, genetic and neuropathological features. Some ALS patients have behavioral/personality changes, which could result in significant obstacles in the care provided by family members and caregivers. An easy screening tool would contribute greatly to the evaluation of these symptoms. We translated the ALS-FTD-Questionnaire, developed in the Netherlands, into Japanese (ALS-FTD-Q-J) and examined the clinimetric properties (internal consistency, construct and clinical validity). Patients with ALS and/or behavioral variant FTD (bvFTD) were evaluated alongside healthy controls in this multicenter study. All ALS patients, regardless of bvFTD status, were further evaluated by the frontal behavioral inventory (FBI) and for frontal/executive function, cognition, anxiety/depression, and motor functions. Data from 146 subjects were analyzed: ALS (92), ALS-bvFTD (6), bvFTD (16), and healthy controls (32). The internal consistency of the ALS-FTD-Q-J was good (Cronbach α=0.92). The ALS-FTD-Q-J showed construct validity as it exhibited a high correlation with the FBI (r=0.79). However, correlations were moderate with anxiety/depression and low with cognitive scales, in contrast to the original report, i.e. a moderate correlation with cognition and a low correlation with anxiety/depression. The ALS-FTD-Q-J discriminated ALS patients from (ALS-)bvFTD patients and controls. Thus, the ALS-FTD-Q-J is useful for evaluating Japanese ALS/FTD patients. Copyright © 2016 Elsevier B.V. All rights reserved.

Radiation detection with Nb/Al-AlOx/Al/Nb superconducting tunnel junctions

International Nuclear Information System (INIS)

Matsumura, Atsuki; Takahashi, Toru; Kurakado, Masahiko

1992-01-01

Superconductor radiation detectors have the possibility of 20-30 times better energy resolution than that of a high resolution Si detector. We fabricated Nb/Al-AlOx/Al/Nb superconducting tunnel junctions with low leakage current. X rays were detected with large area junctions of 178x178 μm 2 . High energy resolution of 160 eV for 5.9 keV was obtained. We also fabricated series connected junctions which covers a rather large area of 4x4 mm 2 . α particles injected into the rear substrate were detected using nonthermal phonons induced by the radiations in the substrate. (author)

ALS-Plus Syndrome: Non-Pyramidal Features in a Large ALS Cohort

Science.gov (United States)

McCluskey, Leo; Vandriel, Shannon; Elman, Lauren; Van Deerlin, Vivianna M.; Powers, John; Boller, Ashley; Wood, Elisabeth McCarty; Woo, John; McMillan, Corey T.; Rascovsky, Katya; Grossman, Murray

2014-01-01

Objective Autopsy studies show widespread pathology in amyotrophic lateral sclerosis (ALS), but clinical surveys of multisystem disease in ALS are rare. We investigated ALS-Plus syndrome, an understudied group of patients with clinical features extending beyond pyramidal and neuromuscular systems with or without cognitive/behavioral deficits. Methods In a large, consecutively-ascertained cohort of 550 patients with ALS, we documented atypical clinical manifestations. Genetic screening for C9orf72 hexanucleotide expansions was performed in 343 patients, and SOD1, TARDBP, and VCP were tested in the subgroup of patients with a family history of ALS. Gray matter and white matter imaging was available in a subgroup of 30 patients. Results Seventy-five (13.6%) patients were identified with ALS-Plus syndrome. We found disorders of ocular motility, cerebellar, extrapyramidal and autonomic functioning. Relative to those without ALS-Plus, cognitive impairment (8.0% vs 2.9%, p=0.029), bulbar-onset (49.3% vs 23.2%, pALS-Plus. Survival was significantly shorter in ALS-Plus (29.66 months vs 42.50 months, p=0.02), regardless of bulbar-onset or mutation status. Imaging revealed significantly greater cerebellar and cerebral disease in ALS-Plus compared to those without ALS-Plus. Conclusions ALS-Plus syndrome is not uncommon, and the presence of these atypical features is consistent with neuropathological observations that ALS is a multisystem disorder. ALS-Plus syndrome is associated with increased risk for poor survival and the presence of a pathogenic mutation. PMID:25086858

Tailoring ultrafine grained and dispersion-strengthened Ti 2 AlC/TiAl ...

Indian Academy of Sciences (India)

In situ Ti 2 AlC/TiAl composite was fabricated by hot-pressing method via the reaction system of Ti 3 AlC 2 and Ti-Al pre-alloyed powders at low temperature of 1150 ∘ C. The composite mainly consisted of TiAl, Ti 3 Al and Ti 2 AlC phases. Fine Ti 2 AlC particles were homogeneously distributed and dispersed in the matrix.

Prólogo al dossier monográfico "La presencia italiana en las Américas"

Directory of Open Access Journals (Sweden)

Adriana Cristina Crolla

2015-01-01

Full Text Available Pretender elaborar una cartografía de la presencia de los italianos en el continente americano constituye a primera vista una empresa titánica y de resultados siempre aproximativos e incompletos. Pero intentar realizarlo es un desafío que debe asumirse a fin de colocar nuevas piezas en un puzzle inconmensurable, configurado por cantidades de complejas aristas que esperan ser analizadas. La significativa presencia de viajeros e inmigrantes italianos en el continente americano durante los últimos doscientos años -especialmente relevante desde el punto de vista histórico, cultural y humano- permite de forma excepcional estudiar este complejo fenómeno migratorio partiendo del caso concreto del área hispanoamericana y lusófona, tomando para ello como referencia los múltiples ejemplos de interacción entre culturas, al igual que lo que sucedió en América del Norte, donde el arribo de oleadas inmigratorias y los contactos políticos y culturales fueron también sumamente fructíferos.En este sentido, el abordaje de mutuas contaminaciones e interinfluencias a lo largo del tiempo pasa necesariamente por el estudio de fenómenos históricos tan significativos como son las causas y perfiles de la (e(inmigración así como los procesos particulares de inserción en las nuevas territorialidades; la incidencia de la italianidad en corrientes políticas, sociológicas y culturales en los ámbitos de inserción, en las prácticas de lectura y de traducción; o el aporte de creadores italianos y sus descendientes en el campo de la literatura, la filosofía, la ciencia, el arte y la arquitectura. Otro campo de interés es el de la lengua y las investigaciones que se orientan a la detección de italianismos y al estudio de la generación de interlenguas en las variantes del español hispanoamericano, del portugués brasileño, en el inglés norteamericano y en el bilingüismo canadiense. Y todo ello sin descuidar la importancia que la matriz cultural

Assessing behavioural changes in ALS: cross-validation of ALS-specific measures.

Science.gov (United States)

Pinto-Grau, Marta; Costello, Emmet; O'Connor, Sarah; Elamin, Marwa; Burke, Tom; Heverin, Mark; Pender, Niall; Hardiman, Orla

2017-07-01

The Beaumont Behavioural Inventory (BBI) is a behavioural proxy report for the assessment of behavioural changes in ALS. This tool has been validated against the FrSBe, a non-ALS-specific behavioural assessment, and further comparison of the BBI against a disease-specific tool was considered. This study cross-validates the BBI against the ALS-FTD-Q. Sixty ALS patients, 8% also meeting criteria for FTD, were recruited. All patients were evaluated using the BBI and the ALS-FTD-Q, completed by a carer. Correlational analysis was performed to assess construct validity. Precision, sensitivity, specificity, and overall accuracy of the BBI when compared to the ALS-FTD-Q, were obtained. The mean score of the whole sample on the BBI was 11.45 ± 13.06. ALS-FTD patients scored significantly higher than non-demented ALS patients (31.6 ± 14.64, 9.62 ± 11.38; p ALS-FTD-Q was observed (r = 0.807, p ALS-FTD-Q. Good construct validity has been further confirmed when the BBI is compared to an ALS-specific tool. Furthermore, the BBI is a more comprehensive behavioural assessment for ALS, as it measures the whole behavioural spectrum in this condition.

Plastic deformation of Al13Fe4 particles in Al-Al13Fe4 by high-speed compression

International Nuclear Information System (INIS)

Yoneyama, N.; Mizoguchi, K.; Kumai, S.; Sato, A.; Kiritani, M.

2003-01-01

Spray-formed Al-Fe alloys having undergone high-speed deformation were examined under a high-voltage electron microscope. Two types of specimens were examined; one containing fine Al 13 Fe 4 particles, and the other containing large particles. In the former specimen, deformation is found to proceed in three patterns, depending on specimen thickness and strain rate: (1) without deformation of the Al 13 Fe 4 ; (2) breaking of the Al 13 Fe 4 ; or (3) melting of the Al 13 Fe 4 . Local melting is found to alter some of the Al 13 Fe 4 particles, to impart five-fold symmetry in diffraction or an amorphous structure. In the latter specimen, introduction of glide dislocations enabled us to determine a shear system in the mc102 monoclinic c2/m crystal of Al 13 Fe 4 . On the bases of these observations, the mechanism of high-speed deformation is discussed while taking into account the highly stressed and/or heated states of Al 13 Fe 4 embedded in Al matrix

Synthesis and characterization of pillared bentonite with Al, AL/Fe and impregnated with Pd; Sintese e caracterizacao de bentonitas pilarizadas com Al, AL/Fe e impregnadas com Pd

Energy Technology Data Exchange (ETDEWEB)

Silva, Marcus Vinicius Costa; Pizarro, Alejandro Herrero; Molina, Carmen Belen, E-mail: marcus.ufpa@yahoo.com.br [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Instituto de Tecnologia. Faculdade de Engenharia Quimica; Seccion de Ingenieria Quimica, Facultad de Ciencias, Universidad Autonoma de Madri (Spain)

2017-10-01

In this work, a north american bentonite was pillared with Al and Al/Fe, creating the Al-PILC and Al-Fe-PILC, respectively. Then the Pd was impregnated in the materials, generating Pd-Al-PILC and Pd-Al-Fe-PILC, respectively. The samples were characterized by X-ray diffraction, differential thermal analysis and thermogravimetric and N{sub 2} adsorption at 77 K to determine the specific surface area by BET method (Brunauer - Emmett - Teller). There was an increase in the basal spacing of bentonite from 12.4Å in the original sample to 17.81Å in the Al-Fe-PILC, 17.20Å in Pd-Al-PILC and 17.05Å in the Pd-Al-Fe-PILC. The specific surface area increased from 19.05m{sup 2}/g in the original sample to 173.49m{sup 2}/g in Al-Fe-PILC, 101.31m{sup 2}/g to Pd-Al-PILC and 92m{sup 2}/g in Pd-Al-Fe-PILC. The pillaring process was successful and the synthesized materials have great potential for use as catalysts. (author)

Electrodeposition of Al from a 1-butylpyrrolidine-AlCl3 ionic liquid

Directory of Open Access Journals (Sweden)

Giridhar Pulletikurthi

2015-12-01

Full Text Available The addition of 1-butylpyrrolidine to AlCl3 results in the formation of an electrolyte that is suited to Al deposition. The feasibility of electrodepositing Al from the synthesized electrolyte was investigated. Several compositions of AlCl3 and 1-butylpyrrolidine were prepared for this purpose. These mixtures show a different phase behavior at various compositions of AlCl3 and 1-butylpyrrolidine. IR, Raman and NMR spectroscopy were employed to characterize the synthesized liquids. Among the prepared compositions, 1:1.2 mol ratio of 1-butylpyrrolidine:AlCl3 and the upper phase of 1:1.3 mol ratio of 1-butylpyrrolidine:AlCl3 were found to be suitable for Al electrodeposition at room temperature (RT. Uniform and thick (~µm thick layers of Al were obtained on copper at RT. Al deposition occured from the cationic species of AlCl3−xLy+ (where x≤2, y=1–2, and L=1-butylpyrrolidine in this electrolyte. This behavior is contrary to the well investigated classic AlCl3 based ionic liquids, where the deposition of Al occurs mainly from anionic Al2Cl7− ions.

Orientation of Al3Ti platelets in Al-Al3Ti functionally graded material manufactured by centrifugal method

International Nuclear Information System (INIS)

Watanabe, Y.; Fukui, Y.

1997-01-01

Al-Al 3 Ti functionally graded materials (FGMs) were manufactured by the centrifugal method with a commercial ingot of Al-5 mass% Ti master alloy. The alloy was melted at a liquid/solid coexisting temperature, at which Al 3 Ti remains as a solid, and then it was cast into a thick-walled ring. It was found that the Al-Al 3 Ti functionally graded material can be successfully fabricated by the centrifugal method. It was also found that the volume fraction of the Al 3 Ti can be increased by repetition of the centrifugal method. Since the shape of Al 3 Ti particles in a commercial alloy ingot is that of a platelet, the Al 3 Ti particles are arranged with their platelet planes nearly perpendicular to the radial direction. The orientation effects become stronger when the G number becomes larger. Although the final centrifugal casting was conducted under a very large centrifugal force for the specimen cast three times, the orientation effects were weaker than those in the specimen cast one time. From these observations, it is concluded that the origin of orientation of Al 3 Ti platelets can be attributed to the angular velocity gradient of the melt along the radial direction produced by the difference in the viscosity. (orig.)

In situ synthesis of Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composite by vacuum sintering mechanically alloyed TiAl powder coated with CNTs

Energy Technology Data Exchange (ETDEWEB)

Wang, Jian [Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); Zhao, Naiqin, E-mail: nqzhao@tju.edu.cn [State Key Laboratory of Hydraulic Engineering Simulation and Safety, Tianjin (China); Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China); Nash, Philip [Thermal Processing Technology Center, Illinois Institute of Technology, IL (United States); Liu, Enzuo; He, Chunnian; Shi, Chunsheng; Li, Jiajun [Department of Materials Science and Engineering of Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, Tianjin 300072 (China)

2013-11-25

Highlights: •Using zwitterionic surfactant to enhance the dispersion of the CNTs on the powder surface. •CNTs as carbon source decreased the formation temperature of Ti{sub 2}AlC. •Al{sub 2}O{sub 3} was generated in situ from the oxygen atoms introduced in the drying procedure. •Nanosized Ti{sub 3}Al was precipitated at 1250 °C and distribute in the TiAl matrix homogeneously. •Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composite was synthesized in situ by sintering pre-alloy Ti–Al coated with CNTs. -- Abstract: Bulk Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composites were in situ synthesized by vacuum sintering mechanically alloyed Ti–50 at.% Al powders coated with carbon nanotubes (CNTs). The pre-alloyed Ti–50 at.% Al powder was obtained by ball milling Ti and Al powders. The multi-walled carbon nanotubes as the carbon resource were covered on the surface of the pre-alloyed powders by immersing them into a water solution containing the CNTs. A zwitterionic surfactant was used to enhance the dispersion of the CNTs on the powder surface. The samples were cold pressed and sintered in vacuum at temperatures from 950 to 1250 °C, respectively. The results show that the reaction of forming Ti{sub 2}AlC can be achieved below 950 °C, which is 150 °C lower than in the Ti–Al–TiC system and 250 °C lower than for the Ti–Al–C system due to the addition of CNTs. Additionally, the reinforcement of Al{sub 2}O{sub 3} particles was introduced in situ in Ti{sub 2}AlC/TiAl by the drying process and subsequent sintering of the composite powders. Dense Ti{sub 2}AlC–Al{sub 2}O{sub 3}/TiAl composites were obtained by sintering at 1250 °C and exhibited a homogeneous distribution of Ti{sub 2}AlC, Al{sub 2}O{sub 3} and precipitated Ti{sub 3}Al particles and a resulting high hardness.

27Al NMR studies of NpPd5Al2

International Nuclear Information System (INIS)

Chudo, H.; Sakai, H.; Tokunaga, Y.; Kambe, S.; Aoki, D.; Homma, Y.; Shiokawa, Y.; Haga, Y.; Ikeda, S.; Matsuda, T.D.; Onuki, Y.; Yasuoka, H.

2009-01-01

We present 27 Al NMR studies for a single crystal of the Np-based superconductor NpPd 5 Al 2 (T c =4.9K). We have observed a five-line 27 Al NMR spectrum with a center line and four satellite lines separated by first-order nuclear quadrupole splittings. The Knight shift clearly drops below T c . The temperature dependence of the 27 Al nuclear spin-lattice relaxation rate shows no coherence peak below T c , indicating that NpPd 5 Al 2 is an unconventional superconductor with an anisotropic gap. The analysis of the present NMR data provides evidence for strong-coupling d-wave superconductivity in NpPd 5 Al 2 .

Magnetic tunnel junctions with AlN and AlNxOy barriers

International Nuclear Information System (INIS)

Schwickert, M. M.; Childress, J. R.; Fontana, R. E.; Kellock, A. J.; Rice, P. M.; Ho, M. K.; Thompson, T. J.; Gurney, B. A.

2001-01-01

Nonoxide tunnel barriers such as AlN are of interest for magnetic tunnel junctions to avoid the oxidation of the magnetic electrodes. We have investigated the fabrication and properties of thin AlN-based barriers for use in low resistance magnetic tunnel junctions. Electronic, magnetic and structural data of tunnel valves of the form Ta (100 Aa)/PtMn (300 Aa)/CoFe 20 (20 Aa - 25 Aa)/barrier/CoFe 20 (10 - 20 Aa)/NiFe 16 (35 - 40 Aa)/Ta (100 Aa) are presented, where the barrier consists of AlN, AlN x O y or AlN/AlO x with total thicknesses between 8 and 15 Aa. The tunnel junctions were sputter deposited and then lithographically patterned down to 2 x 2μm 2 devices. AlN was deposited by reactive sputtering from an Al target with 20% - 35% N 2 in the Ar sputter gas at room temperature, resulting in stoichiometric growth of AlN x (x=0.50±0.05), as determined by RBS. TEM analysis shows that the as-deposited AlN barrier is crystalline. For AlN barriers and AlN followed by natural O 2 oxidation, we obtain tunnel magnetoresistance >10% with specific junction resistance R j down to 60Ωμm 2 . [copyright] 2001 American Institute of Physics

A study of the Al-rich part of the Al-Re alloy system

International Nuclear Information System (INIS)

Balanetskyy, S.; Grushko, B.

2008-01-01

The Al-rich part of the Al-Re phase diagram was reinvestigated by scanning and transmission electron microscopy, powder X-ray diffraction and differential thermal analysis. The earlier reported Al 12 Re, Al 6 Re, and Al 11 Re 4 phases were confirmed. Close to the Al 4 Re composition a high-temperature h-Al 4 Re and a low-temperature l-Al 4 Re phase were found to be formed at slightly different compositions. Both exhibited compositional ranges. A new phase was revealed close to the Al 3 Re composition. The Al 11 Re 4 phase is formed congruently at 1650 deg. C, Al 3 Re peritectically at 1610 deg. C, h-Al 4 Re peritectically at 1410 deg. C, l-Al 4 Re peritectically at ∼1000 deg. C, Al 6 Re peritectically at 813 deg. C and Al 12 Re peritectically at 746 deg. C. Finally, the Al 12 Re-(Al) eutectic is formed at 658 deg. C. The Al 3 Re and h-Al 4 Re are decomposed by eutectoid reactions at ∼946 and 833 deg., respectively. The structure of the h-Al 4 Re phase has not yet been clarified, but it is distinctly different from the Al 4 W phase suggested earlier. The structure of l-Al 4 Re was confirmed. The Al 3 Re phase was found to have a monoclinic structure with a = 0.5180(4) nm, b = 3.97641(9) nm, c = 0.4955(3) nm and β = 99.55(7) o

Abu al-Layth al-Libi

Science.gov (United States)

2015-02-01

success. As an Arab participant acknowledged very early on, “the situation was really harsh. All the brothers were tired,” as they lacked food and... glorious battles that occurred during the early Islamic period.133 He stressed the importance of the battlefield as the path to achieve honor and dignity...diaspora in Waziristan. In the words of Walid Othmani, a French jihadi trained by al-Qa`ida in Waziristan in 2008, “[Al-Libi] was someone well-known and

Agente adaptable y aprendizaje

Directory of Open Access Journals (Sweden)

Arturo Angel Lara Rivero

2013-05-01

Full Text Available En este trabajo se contrasta el concepto de agente programado con el de agente complejo adaptable, se presenta una nueva visión ligada al aprendizaje y la estructura del agente. La imagen del agente se analiza considerando los modelos internos, la práctica, el concepto de rutina y la influencia en su comportamiento, y la importancia del aprendizaje ex ante y ex post. Por último se muestra que la resolución de problemas está sujeta a restricciones del agente y se describen las formas de explorar el espacio de soluciones mediante tres tipos de exploración: exhaustiva, aleatoria y selectiva.

La comedia de la premodernidad a la posmodernidad: de Nicolás Granada a Javier Daulte

OpenAIRE

Sikora, Marina

2013-01-01

Desde sus orígenes, la comedia en nuestro país estuvo ligada al acontecer histórico y se manifestó como un género teñido de un fuerte didactismo que ya puede observarse en El hipócrita político (anónimo 1820), la primera comedia de costumbres del Río de la Plata. A partir de entonces, fue frecuente la utilización del género para debatir el contexto histórico imperante. A lo largo del tiempo, el género evolucionó sin perder su carácter didáctico, pasando por las renovaciones impuestas por Greg...

Notas sobre a pirataria de games no Brasil: inclusão (digital) dos pobres e resistência

OpenAIRE

José Carlos Messias

2015-01-01

O objetivo deste trabalho não é advogar sobre a pirataria sob um ponto de vista ético. Embora se reconheça a relevância deste debate, nossa análise se focará nas questões cognitivas e de produção de subjetividade ligadas às práticas piratas da cultura gamer. Defende-se que as subjetividades envolvidas na pirataria de games põem em movimento redes de sociabilidade, processos de autoformação e tutoria, manipulação de dispositivos técnicos complexos, além do estímulo a produção criativa e livre....

Relación entre la demanda de transporte de mercancías por carretera y la economía. Resultados de un análisis estructural con tablas input-output

OpenAIRE

Alises Pérez, Ana; Vassallo Magro, José Manuel

2014-01-01

En la mayoría de países industrializados la demanda de transporte de mercancías por carretera ha venido ligada al crecimiento económico. Sin embargo, las últimas décadas se ha visto cómo esta relación se está perdiendo en algunos países y se están registrando caídas del transporte, incluso en periodos de expansión económica. Este artículo propone un análisis Input-Output de descomposición estructural para explicar cuáles son los factores que, además del crecimiento del PIB considerado tradici...

El desarrollo de las competencias literarias una "inversión" educativa socialmente rentab

Directory of Open Access Journals (Sweden)

María Victoria Reyzábal

2016-01-01

Full Text Available En este momento nadie cuestiona la importancia educativa, emocional y hasta social del desarrollo de las competencias creativas. En el caso de las literarias, estas, además, favorecen el mejoramiento de la recepción y la expresión verbal. Por ello, dar cauce didáctico a estas exigencias o conveniencias, como quieran entenderse, resulta fundamental en una educación cada vez más ligada al futuro desempeño profesional, centrado específicamente en habilidades tecnológicas y economicistas. En este sentido, los talleres de escritura son esenciales para el desarrollo personal y resiliente.

Agente adaptable, aprendizaje y estructura del ambiente: un enfoque alternativo

Directory of Open Access Journals (Sweden)

Arturo Lara Rivero

2012-06-01

Full Text Available En este trabajo se contrasta el concepto de agente programado con el de agente complejo adaptable, se presenta una nueva visión ligada al aprendizaje y la estructura del agente. La imagen del agente se analiza considerando los modelos internos, la práctica, el concepto de rutina y la influencia en su comportamiento, y la importancia del aprendizaje ex ante y ex post. Por último se muestra que la resolución de problemas está sujeta a restricciones del agente y se describen las formas de explorar el espacio de soluciones mediante tres tipos de exploración: exhaustiva, aleatoria y selectiva.

Influencia de las relaciones sociales en el área de organización de empresas

OpenAIRE

Casanueva Rocha, C.; Espasandín Bustelo, F.

2007-01-01

La investigación previa sobre las estructuras sociales de científicos ha estado muy ligada al estudio de las cocitaciones y las coautorías y no se ha centrado en el área de Organización de empresas. Este trabajo utiliza una relación social en la comunidad científica, la elección de los tribunales de tesis doctorales, para identificar la estructura social del área de Organización de empresas en España. Los datos muestran la asociación entre centralidad de los doctores en el área y elección de ...

Felicidad en red. La huella de las políticas empresariales de felicidad en las relaciones sociales en el contexto organizativo

OpenAIRE

Yter Gimeno, Mireia

2017-01-01

[spa] Esta tesis nace con la intención de analizar sociológicamente un aspecto que ha preocupado a la humanidad desde tiempos inmemoriales y que está íntimamente ligada al día a día de las personas: la felicidad. En el ámbito académico el estudio y análisis de la felicidad se ha llevado a cabo desde aproximaciones de tipo individual. El papel de la sociología ha sido más bien secundario. En gran parte porque se ha tendido a conceptualizar la felicidad más como un estado mental que como algo ...

SAP-like ultrafine-grained Al composites dispersion strengthened with nanometric AlN

International Nuclear Information System (INIS)

Balog, M.; Krizik, P.; Yan, M.; Simancik, F.; Schaffer, G.B.; Qian, M.

2013-01-01

This paper reports the development of novel Sinter-Aluminum-Pulver (SAP)-like Al–AlN nanocomposites via replacing the native Al 2 O 3 thin films on fine Al powder with a large volume fraction of in situ formed nanometric AlN dispersoids. Fine gas-atomized Al powder (d 50 =1.3 µm) compacts were first partially nitrided at 590 °C in flowing nitrogen, controlled by a small addition of Sn (0.3–0.4 wt%), and subsequently consolidated by hot direct extrusion. The resulting Al–AlN composites consisted of submicrometric Al grains reinforced with nanometric AlN dispersoids together with some nanometric Al 2 O 3 dispersoids. An Al–13 vol% AlN nanocomposite fabricated this way achieved exceptional ultimate tensile strength of 227 MPa, yield strength of 195 MPa and Young's modulus of 66 GPa at 300 °C, superior to typical SAP materials and coarse grained Al–AlN composites. In addition, the Al–13 vol% AlN nanocomposite exhibited good thermal stability up to 500 °C. The strengthening mechanism is discussed

Analisis Kecenderungan Manhaj Akidah Shaykh Shams al-Din al-Sumatera’i

Directory of Open Access Journals (Sweden)

MOHD HAIDHAR KAMARZAMAN

2016-12-01

Full Text Available Shaykh Shams al-Din al-Sumatera'i is a very great and respected scholar during 16th and 17th century of Acheh. His knowledge in various fields recognized by local and international scholars. He had been a Qadi Malik al-’Adil, a religious leader, who became a referred by communities and country during the reign of the three Sultans of Aceh. He has authored nearly 40 pieces of books related to the theology and sufism. This study focuses on the methods used by Shaykh Shams al-Din al-Sumatera'i in his theological writings. This study found that Shaykh Shams al-Din al-Sumatera'i had used six methods in the such writings.

IDENTIFICACIÓN Y ANÁLISIS DE LOS CRITERIOS DE CAMBIOS DEL SISTEMA DE DISTRIBUCIÓN TURÍSTICO ASOCIADOS AL USO INTENSIVO DE LAS TECNOLOGÍAS DE LA INFORMACIÓN Y DE LA COMUNICACIÓN

Directory of Open Access Journals (Sweden)

Berné Manero, Carmen

2013-05-01

Full Text Available La literatura asigna unánimemente a las tecnologías de la información y de la comunicación (TIC la facultad de incrementar la eficacia de la cooperación entre los operadores turísticos y la de favorecer el desarrollo de la industria turística. Sin embargo, no existe una síntesis de la investigación teórica que permita abordar un análisis empírico dirigido a reducir la incertidumbre que se cierne sobre el futuro de la estructura del sistema de distribución turístico como consecuencia de un uso intensivo de las TIC. Así, el propósito de este trabajo es cubrir esta falta. Para ello, primero se identifican en la literatura los posibles cambios en el sistema que teóricamente pueden estar siendo generados por las TIC; segundo, se aplica este marco teórico a una base de datos que recoge información proporcionada por los intermediarios turísticos. El análisis factorial exploratorio encuentra que el uso intensivo de las TIC fomenta 4 tipos de cambios estructurales. La evolución del sector parece ligada a un incremento de canales directos así como al reposicionamiento de los proveedores, de los intermediarios (tanto tradicionales como virtuales y de los consumidores.

Ultrasonic spot welding of Al/Mg/Al tri-layered clad sheets

International Nuclear Information System (INIS)

Macwan, A.; Patel, V.K.; Jiang, X.Q.; Li, C.; Bhole, S.D.; Chen, D.L.

2014-01-01

Highlights: • The optimal welding condition is achieved at 100 J and 0.1 s. • Failure load first increases and then decreases with increasing welding energy. • The highest failure load after welding is close to that of the clad sheets. • At low energy levels failure occurs in the mode of interfacial failure. • At high energy levels failure takes place at the edge of nugget region. - Abstract: Solid-state ultrasonic spot welding (USW) was used to join Al/Mg/Al tri-layered clad sheets, aiming at exploring weldability and identifying failure mode in relation to the welding energy. It was observed that the application of a low welding energy of 100 J was able to achieve the optimal welding condition during USW at a very short welding time of 0.1 s for the tri-layered clad sheets. The optimal lap shear failure load obtained was equivalent to that of the as-received Al/Mg/Al tri-layered clad sheets. With increasing welding energy, the lap shear failure load initially increased and then decreased after reaching a maximum value. At a welding energy of 25 J, failure occurred in the mode of interfacial failure along the center Al/Al weld interface due to insufficient bonding. At a welding energy of 50 J, 75 J and 100 J, failure was also characterized by the interfacial failure mode, but it occurred along the Al/Mg clad interface rather than the center Al/Al weld interface, suggesting stronger bonding of the Al/Al weld interface than that of the Al/Mg clad interface. The overall weld strength of the Al/Mg/Al tri-layered clad sheets was thus governed by the Al/Mg clad interface strength. At a welding energy of 125 J and 150 J, thinning of weld nugget and extensive deformation at the edge of welding tip caused failure at the edge of nugget region, leading to a lower lap shear failure load

KITAB AL-SANĪ AL-MAṬĀLIB: INTERKONEKSI NAHWU DAN TASAWUF

Directory of Open Access Journals (Sweden)

Zakiyah Zakiyah

2012-12-01

Tulisan ini mereview buku yang berjudul al-Sanī al-Maṭālib yang ditulis oleh Kiai Nur Iman Mlangi Yogyakarta. Buku ini ditulis dalam bahasa Arab yang me­ngandung interkoneksi antara ilmu Nahwu (tata bahasa Arab dengan mis­tisis­me. Buku ini sangat menarik karena kenyataan bahwa kedua pengetahuan tersebut memiliki aturan sendiri-sendiri. Selain itu, sangat sedikit penulis yang menulis dengan gaya seperti itu. Salah satunya adalah Syaikh Abdul Qadir bin Ahmad al-Kuhany dengan karyanya yang berjudul Manniyat al-Fāqir al-Munjarid wa Sayrat al-Murīd al-Mutafarrid. Buku al-Saniy al-Muthalib diduga telah ditulis pada akhir abad ke-18 atau awal abad ke-19, menurut periode kehidupan Kiai Nur Iman yaitu sekitar pertengahan abad ke-18. Aturan Nahwu dalam buku ini dijelaskan secara teosofi yang dimulai dengan penjelasan mengenai tauhid (keesaan Tuhan sebagai kajian dasar bagi orang Islam, yang diikuti dengan makna dari masing-masing aturan bahasa Arab dalam aspek mistiknya.

Rekonstruksi Konsep Ijtihad: Studi Pemikiran Ben’umar tentang al-Ijtihad fi al-Waqi’

Directory of Open Access Journals (Sweden)

Duski Ibrahim

2015-10-01

Full Text Available This paper is the result of a research that evaluating the reconstruction the concept of ijtihad, by discuss the idea of al-Ijtihad Ben'umar fi al-waqi’. This paper concludes that Al-Ijtihad fi al-waqi’ is actually a form of collective ijtihad (al ijtihad al-jama'i, by gathering the experts of shari'ah law (fuqaha` ash-shar'i and experts Researchers and scientists (khubara` al-'ashr. Because experts know the nash purposes, while researchers and scientists (al-khubara` know the reality (al-waqi’, the effects in the future (ma'alat = future effect and challenges (tahaddiyat. The idea of formulating the concept of al-ijtihad fi al-waqi’ emerged based on a premise that ijtihad is a creation of experts to implement Islamic law in society. Therefore, the concept of ijtihad experienced a significant development, start from using the nash from the language aspects, continue to the using of logic. At the moment when the situation people are increasingly develop, then the creation of ijtihad become a necessary to developed, for example in the form of al-ijtihad fi al-waqi’ . About the source of the formation of the concept of al -ijtihad fi al-waqi’ comes from theory about the functions of nash, al-manath theory in Islamic law, and supported by the theory of al-mashlalah al-mursalah.

Study of the 26Al(n,p)26Mg and 26Al(n,α)23Na reactions using the 27Al(p,p')27Al inelastic scattering reaction

International Nuclear Information System (INIS)

Benamara, S; De Séréville, N; Hammache, F; Stefan, I; Roussel, P; Ancelin, S; Assié, M; Guillot, J; Le Crom, B; Lefebvre, L; Adsley, P; Laird, A M; Barton, C; Diget, C; Fox, S; Coc, A; Deloncle, I; Hamadache, C; Kiener, J; Lefebfre-Schuhl, A

2016-01-01

26 Al was the first cosmic radioactivity ever detected in the galaxy as well as one of the first extinct radioactivity observed in refractory phases of meteorites. Its nucleosynthesis in massive stars is still uncertain mainly due to the lack of nuclear information concerning the 26 Al(n,p) 26 Mg and 26 Al(n,α) 23 Na reactions. We report on a single and coincidence measurement of the 27 Al(p,p') 27 Al(p) 26 Mg and 27 Al(p,p') 27 Al(α) 23 Na reactions performed at the Orsay TANDEM facility aiming at the spectroscopy study of 27 Al above the neutron threshold. Fourteen states are observed for the first time within 350 keV above the 26 Al+n threshold. (paper)

AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Li Jinlong; Mao Shoudong; Sun Kefei [Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Li Xiaomin [Shanghai Institute of Ceramics Chinese Academy of Sciences, Shanghai 200050 (China); Song Zhenlun [Zhejiang Province Key Laboratory of Magnetic Materials and Application Technology, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)], E-mail: songzhenlun@nimte.ac.cn

2009-11-15

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.

AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

International Nuclear Information System (INIS)

Li Jinlong; Mao Shoudong; Sun Kefei; Li Xiaomin; Song Zhenlun

2009-01-01

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.

Al-Si/Al2O3 in situ composite prepared by displacement reaction of CuO/Al system

Directory of Open Access Journals (Sweden)

Zhang Jing

2010-02-01

Full Text Available Al2O3 particle-reinforced ZL109 composite was prepared by in situ reaction between CuO and Al. The microstructure was observed by means of OM, SEM and TEM. The Al2O3 particles in sub-micron sizes distribute uniformly in the matrix, and the Cu displaced from the in situ reaction forms net-like alloy phases with other alloy elements. The hardness and the tensile strength of the composites at room temperature have a slight increase as compared to that of the matrix. However, the tensile strength at 350 ℃ has reached 90.23 MPa, or 16.92 MPa higher than that of the matrix. The mechanism of the reaction in the CuO/Al system was studied by using of differential scanning calorimetry(DSC and thermodynamic calculation. The reaction between CuO and Al involves two steps. First, CuO reacts with Al to form Cu2O and Al2O3 at the melting temperature of the matrix alloy, and second, Cu2O reacts with Al to form Cu and Al2O3 at a higher temperature. At ZL109 casting temperature of 750–780 ℃, the second step can also take place because of the effect of exothermic reaction of the first step.

AlGaN nanocolumns and AlGaN/GaN/AlGaN nanostructures grown by molecular beam epitaxy

Energy Technology Data Exchange (ETDEWEB)

Ristic, J.; Sanchez-Garcia, M.A.; Ulloa, J.M.; Calleja, E. [Departamento de Ingenieria Electronica, ETSI Telecomunicacion, Universidad Politecnica de Madrid, Ciudad Universitaria, 28040 Madrid (Spain); Sanchez-Paramo, J.; Calleja, J.M. [Departamento de Fisica de Materiales, Universidad Autonoma de Madrid, Cantoblanco, 28049 Madrid (Spain); Jahn, U.; Trampert, A.; Ploog, K.H. [Paul-Drude-Institut fuer Festkoerperelektronik, Hausvogteiplatz 5-7, 10117 Berlin (Germany)

2002-12-01

This work reports on the characterization of hexagonal, single crystal AlGaN nanocolumns with diameters in the range of 30 to 100 nm grown by molecular beam epitaxy on Si(111) substrates. The change of the flux ratio between the Al and the total III-element controls the alloy composition. The Al composition trend versus the Al flux is consistent both with the E{sub 2} phonon energy values measured by inelastic light scattering and the luminescence emission peaks position. High quality low dimensional AlGaN/GaN/AlGaN heterostructures with five GaN quantum discs, 2 and 4 nm thick, embedded into the AlGaN columns, were designed in order to study the quantum confinement effects. (Abstract Copyright [2002], Wiley Periodicals, Inc.)

KONSEPSI AL-QURAN DAN AL-HADITS TENTANG OPERASIONAL BANK SYARIAH

Directory of Open Access Journals (Sweden)

Muhammad Ardy Zaini

2015-01-01

Full Text Available Islam hadir dengan beberapa tujuan, diantaranya adalah terciptanya khoirul ummah dan rahmatan lil’alamin dengan al-Qur’an dan al-Hadits sebagai penuntun umat Islam demi tercapainya tujuan tersebut. Sebagai pedoman hidup, al-Qur’an dan al-Hadits memberikan berbagai petunjuk tentang keteraturan dan permasalahan hidup, termasuk didalamnya mengenai perbankan yang telah memenuhi hampir separuh sisi-sisi kehidupan manusia. Untuk memaksimal ajaran syariah secara kaffah, maka nilai-nilai yang terdapat dalam al-Quran harus mampu diturunkan pada tataran praktis. Salah satu usaha dan langkah dalam rangka menemukan formula perbankan masa depan, al-Quran dan Hadits memiliki konsepsi dalam kegiatan operasional Bank Syariah. Hal ini dilakukan untuk membentuk sikap mental atau watak yang terjabarkan dalam pola berpikir, cara berbicara, dan etika bertingkah laku, sebagai ekspresi jiwa dari manusia yang beriman dan bertakwa kepada Allah Swt. Agar umat Islam mampu menjadi umat yang unggul (khayr ummah.

Fabrication of AlN-TiC/Al composites by gas injection processing

Institute of Scientific and Technical Information of China (English)

YU Huashun; CHEN Hongmei; MA Rendian; MIN Guanghui

2006-01-01

The fabrication of AlN-TiC/Al composites by carbon-and nitrogen-containing gas injection into Al-Mg-Ti melts was studied. It was shown that AlN and TiC particles could be formed by the in situ reaction of mixture gas (N2+C2H2+NH3) with Al-Mg-Ti melts. The condition for the formation of AlN was that the treatment temperature must be higher than 1373 K, and the amounts of AlN and TiC increased with the increase of the treatment temperature and the gas injection time.It was considered that AlN was formed by the direct reaction of Al with nitrogen-containing gas at the interface of the gas bubble and the melt. However, the mechanism of TiC formation is a combination mechanism of solution-precipitation and solid-liquid reaction.

The formation of AlB2 in an Al-B master alloy

International Nuclear Information System (INIS)

Wang Xiaoming

2005-01-01

The formation of borides in an Al-3 wt.%B master alloy, produced via chemical reactions of KBF 4 and aluminium has been investigated. The chemical reactions produce boron, which dissolves into molten aluminium and subsequently forms aluminium borides. Backscattered electron imaging (BEI) of the Al-3 wt.%B master alloy under a scanning electron microscope (SEM) revealed the presence of two types of phases that contain different levels of boron. Combined with X-ray diffraction (XRD) results, the two types of phases are identified as AlB 2 on AlB 12 . This gives a direct evidence for a peritectic reaction of AlB 12 and aluminium, which produces AlB 2 . The thermodynamic properties of the reactions that may be involved are examined, and the presence of AlB 12 phase in the master alloy explained. The observed microstructure is explained according to the peritectic reaction in an Al-B phase diagram. The stability of AlB 2 and AlB 12 at lower temperature than 975 deg. C is clarified

Construction and evaluation of multi-component Zn-Al based bearing alloys (Zn-Al-Si, Zn-Al-Cu)

International Nuclear Information System (INIS)

Shahmiri, M.; Shahin, K.

2001-01-01

Zn-Al based alloys, with excellent mechanical properties, are finding increasing applications in various industries, especially bearing and bushing fields. Observed dimensional instabilities, in their multicomponent systems, (e. g. Zn-Al-Si and, Zn-Al Si-Cu), is believed to be as the result of some kinds of phase transformation, due to the temperature variations, while in service. Profound understanding of the phase transformations due to the temperature variation, requires detailed evaluations of the isothermal sections of the multi-components phase diagrams of Zn-Al-Si and, Zn-Al-Si-Cu alloy systems. In the present article, the isothermal sections of the aforementioned ternary and quaternary systems in the solid state regions have been investigated and observed phase transitions have been critically evaluated

The Existence of a Designer Al=Al Double Bond in the LiAl2 H4- Cluster Formed by Electronic Transmutation.

Science.gov (United States)

Lundell, Katie A; Zhang, Xinxing; Boldyrev, Alexander I; Bowen, Kit H

2017-12-22

The Al=Al double bond is elusive in chemistry. Herein we report the results obtained via combined photoelectron spectroscopy and ab initio studies of the LiAl 2 H 4 - cluster that confirm the formation of a conventional Al=Al double bond. Comprehensive searches for the most stable structures of the LiAl 2 H 4 - cluster have shown that the global minimum isomer I possesses a geometric structure which resembles that of Si 2 H 4 , demonstrating a successful example of the transmutation of Al atoms into Si atoms by electron donation. Theoretical simulations of the photoelectron spectrum discovered the coexistence of two isomers in the ion beam, including the one with the Al=Al double bond. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Characterization of N-polar AlN in GaN/AlN/(Al,Ga)N heterostructures grown by metal-organic chemical vapor deposition

Science.gov (United States)

Li, Haoran; Mazumder, Baishakhi; Bonef, Bastien; Keller, Stacia; Wienecke, Steven; Speck, James S.; Denbaars, Steven P.; Mishra, Umesh K.

2017-11-01

In GaN/(Al,Ga)N high-electron-mobility transistors (HEMT), AlN interlayer between GaN channel and AlGaN barrier suppresses alloy scattering and significantly improves the electron mobility of the two-dimensional electron gas. While high concentrations of gallium were previously observed in Al-polar AlN interlayers grown by metal-organic chemical vapor deposition, the N-polar AlN (Al x Ga1-x N) films examined by atom probe tomography in this study exhibited aluminum compositions (x) equal to or higher than 95% over a wide range of growth conditions. The also investigated AlN interlayer in a N-polar GaN/AlN/AlGaN/ S.I. GaN HEMT structure possessed a similarly high x content.

KRITIK ATAS KRITIK EPISTEMOLOGI TAFSIR M. ABIED AL JABIRI: Studi Kritis atas Madkhal ila al Quran al Karim

Directory of Open Access Journals (Sweden)

Ahmad Fawaid

2015-12-01

Full Text Available This paper critically views the epistemology of Muhammad Abid al Jabiri’s interpretation in his book, Madkhal ila al Quran al Karim. His latest work is projected to make the Quran relevant to mankind today and with certainly critiquing classical Quranic studies that have been constructed by previous scholars. Starting from Arab criticism, which is expected to synergize the gap between Turath and modernity, al Jabiri tried out his theory in the realm of Quranic studies oriented to maintain its originality and interpretation from sectarian influence. Focusing on al Jabiri’s review on the Quran, this paper examines and associates some of the problems with the epistemology of critique in Arab reasoning. Finally, it is inferred that the epistemologic offer of al Jabiri used in Turath is not fully applicable in Quranic studies for several reasons. First, the Quranic studies existed within the chain of sanad in its formation. Secondly, at the application stage, al Jabri often overlooked the sanad and narrations from the companions.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

International Nuclear Information System (INIS)

Li, Shuo; Bhushan, Bharat

2016-01-01

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

Lubrication performance and mechanisms of Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxide nanoparticles as lubricant additives

Energy Technology Data Exchange (ETDEWEB)

Li, Shuo [School of Materials Science and Technology, China University of Geosciences (Beijing), 29 Xueyuan Road, Haidian Distract, Beijing 100083 (China); Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States); Bhushan, Bharat, E-mail: bhushan.2@osu.edu [Nanoprobe Laboratory for Bio- & Nanotechnology and Biomimetics (NLBB), The Ohio State University, 201 W. 19th Avenue Columbus, OH 43210-1142 (United States)

2016-08-15

Highlights: • Mg/Al-, Zn/Al- and Zn/Mg/Al-layered double hydroxide were synthesized. • Mg/Al-LDH had superior tribological performance compared to other LDHs. • The best thermal stability of Mg/Al-LDH was responsible for its friction property. - Abstract: Solid lubricant particles are commonly used as oil additives for low friction and wear. Mg/Al-, Zn/Al-, and Zn/Mg/Al-layered double hydroxides (LDH) were synthesized by coprecipitation method. The benefits of LDH nanoparticles are that they can be synthesized using chemical methods where size and shape can be controlled, and can be modified organically to allow dispersal in fluids. The LDH nanoparticles were characterized by X-ray diffraction, scanning electron microscope, thermogravimetry, and differential scanning calorimetry. A pin-on-disk friction and wear tester was used for evaluating the friction and wear properties of LDH nanoparticles as lubricant additives. LDH nanoparticles have friction-reducing and anti-wear properties compared to oil without LDHs. Mg/Al-LDH has the best lubrication, possibly due to better thermal stability in severe conditions.

La crianza y educación infantil como cuestión social, política y cotidiana: una etnografía en barrios populares del Gran Buenos Aires

Directory of Open Access Journals (Sweden)

Laura Santillán

2009-12-01

Full Text Available Dentro de las ciencias sociales se produjeron importantes avances respecto al conocimiento de las formas culturales de la crianza y la educación infantil. Sin embargo, en el sentido común y también en parte del discurso académico, persisten importantes reduccionismos que no hacen más que retomar solo algunos aspectos del cuidado infantil. En el siguiente artículo nos proponemos analizar los procesos y las relaciones que atraviesan las iniciativas ligadas con el cuidado y la educación infantil en contextos marcados por la desigualdad. Para ello nos basamos en los registros de tipo etnográfico que realizamos en barrios populares del Gran Buenos Aires, Argentina. Como daremos cuenta con el análisis, las iniciativas ligadas con la socialización y educación de los chicos que viven en las barriadas populares se definen en tramas de intervención a cargo de actores sociales que incluyen y rebasan a las instituciones esperables para ello. Nos referimos a actores que definimos como «sociales» y «políticos» en tanto producen significados sobre la educación en vinculación con distintas dimensiones de la vida social y en el marco de relaciones sociales atravesadas por el poder.

Dakwah Kultural Bayt al-Qur’an al-Akbar Ukiran Kayu Khas Melayu Palembang

Directory of Open Access Journals (Sweden)

Reza Pahlevi

2016-07-01

Full Text Available Penelitian ini berusaha mengungkap berbagai fenomena yang menggambarkan serangkaian kegiatan dakwah kultural Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang. Sehingga dapat diperoleh sejumlah informasi mengenai berbagai upaya penerapan program yang dimaksud. Penelitian ini dapat disimpulkan, pertama kontribusi Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang terhadap perkembangan metode dakwah kultural adalah dakwah melalui seni. Kedua, Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang sebagai tempat Wisata Religi yang sangat signifikan.   This research tries to reveal the various phenomenon that describe a series of cultural propaganda activities Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang. In order to obtain some informations about the efforts of the implementation of the program in question. It can be concluded, the first contribution of Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang on the development of methods of cultural propaganda is propaganda through art. Second Bayt al-Qur’an al-Akbar Ukiran Khas Melayu Palembang as a very significant Religious Tourism.

Optical phonon scattering on electronic mobility in Al2O3/AlGaN/AlN/GaN heterostructures

Science.gov (United States)

Zhou, X. J.; Qu, Y.; Ban, S. L.; Wang, Z. P.

2017-12-01

Considering the built-in electric fields and the two-mode property of transverse optical phonons in AlGaN material, the electronic eigen-energies and wave functions are obtained by solving Schrödinger equation with the finite difference method. The dispersion relations and potentials of the optical phonons are given by the transfer matrix method. The mobility of the two dimensional electron gas influenced by the optical phonons in Al2O3/AlGaN/AlN/GaN heterostructures is investigated based on the theory of Lei-Ting force balance equation. It is found that the scattering from the half-space phonons is the main factor affecting the electronic mobility, and the influence of the other phonons can be ignored. The results show that the mobility decreases with increasing the thicknesses of Al2O3 and AlN layers, but there is no definite relationship between the mobility and the thickness of AlGaN barrier. The mobility is obviously reduced by increasing Al component in AlGaN crystal to show that the effect of ternary mixed crystals is important. It is also found that the mobility increases first and then decreases as the increment of the fixed charges, but decreases always with increasing temperature. The heterostructures constructed here can be good candidates as metal-oxide-semiconductor high-electron-mobility-transistors since they have higher electronic mobility due to the influence from interface phonons weakened by the AlN interlayer.

Al2O3 adherence on CoCrAl alloys

International Nuclear Information System (INIS)

Kingsley, L.M.

1980-04-01

Adherence of protective oxides on NiCrAl and CoCrAl superalloys has been promoted by a dispersion of a highly oxygen reactive element or its oxide being produced within the protection system. Two aspects of this subject are investigated here: the use of Al 2 O 3 as both the dispersion and protective oxide; and the production of an HfO 2 dispersion while simultaneously aluminizing the alloy. It was found that an Al 2 O 3 dispersion will act to promote the adherence of an external scale of Al 2 O 3 to a degree comparable to previously tested dispersions and an HfO 2 dispersion comparable to that produced by a Rhines pack treatment is produced during aluminization

Tracing Al Shabaab’s Decision to Cooperate with Al Qaeda in Somalia (2008

Directory of Open Access Journals (Sweden)

Adlini Ilma Ghaisany Sjah

2014-02-01

Full Text Available 'Al Shabaab, a Somali insurgent with predominantly nationalistic causes (alongside transnational [global Jihad] and Islamic goals made the choice to fight on behalf of Al Qaeda in 2008. The decision to do so contrasted with Al Shabaab’s previous behaviour of actively denying cooperation and distancing itself from Al Qaeda. This study aims to uncover factors that contributed to Al Shabaab’s decision through the use of process-tracing. The results show that Al Shabaab’s declaration of cooperation with Al Qaeda in August 2008 was brought about by a series of events that traced back to four factors: public reactions to the implementation of a Salafi ideology, the shift to a radical leadership, Al Shabaab’s inability to maintain stability in areas under its control and its increasing attacks by Al Shabaab on the Somali public. Al Shabaab pursued cooperation with Al Qaeda after realizing that their nationalistic preference was no longer achievable in the near future.' ' '

All About ALS

Science.gov (United States)

... Subscribe August 2015 Print this issue All About ALS Understanding a Devastating Disorder En español Send us ... Sports Concussions Wise Choices How Can I Help ALS Research? If you have ALS, join the National ...

Atomistic simulations of diffusion mechanisms in off-stoichiometric Al-rich Ni3Al

International Nuclear Information System (INIS)

Duan, Jinsong

2007-01-01

This paper presents dynamics simulation results of diffusion in off-stoichiometric Al-rich Ni 3 Al (Ni 73 Al 27 ) at temperature ranging from 1300 to 1550 K. The interatomic forces are described by the Finnis-Sinclair type N-body potentials. Particular attention is devoted to the effect of the extra 2% of Al atoms sitting on the Ni sublattice as antisite point defects (Al Ni ) on diffusion. Simulation results show that Ni atoms mainly diffuse through the Ni sublattice at the temperatures investigated. Al atoms diffuse via both the intrasublattice and antistructure bridge (ASB) mechanisms. The contribution to Al diffusion from the ASB mechanism decreases at the lower temperature (T Ni ) enhances both Al and Ni diffusion in Ni 73 Al 27 . The Ni-Al coupled diffusion effect is observed and understood at the atomic level for the first time

Methodology and Characteristics of Zad al-masir fi ‘ilm al-tafsirby AllamaIbn al-Jawzī (Urdu

Directory of Open Access Journals (Sweden)

Dr. Muhammad Riaz al Azhari

2017-01-01

Full Text Available This article describes the methodology and characteristics of Zad al-masir fi ‘ilm al-tafsir. This is one the finest work of AllamaIbn al-Jawzī, a 6th century prominent Interpreter. Several editions of this Tafsir have been published. However, the edition of dar al-kitab al-‘arbi, Beirut published in four volumes is selected for this study. This exegesis is based on conventional narrations, authentic quotations from the Islamic Scholars and lingual & grammatical discussions. As a witness, causes of verses (asbabal-Nuz┴l,Makki and MadaniSurah’s (chapters, the abrogating and abrogated verses (al-nasikhwal-mans┴kh and Islamic jurisprudence have been discussed in it where needed. The quality of this translation which is admirable is that mostly authentic Ahadith from original sources, and references to well known basic books in relevant discussions have been described. `

Phenotypic and genotypic studies of ALS cases in ALS-SMA families.

Science.gov (United States)

Corcia, Philippe; Vourc'h, Patrick; Blasco, Helene; Couratier, Philippe; Dangoumau, Audrey; Bellance, Remi; Desnuelle, Claude; Viader, Fausto; Pautot, Vivien; Millecamps, Stephanie; Bakkouche, Salah; Salachas, FranÇois; Andres, Christian R; Meininger, Vincent; Camu, William

2018-03-01

Amyotrophic lateral sclerosis (ALS) and spinal muscular atrophy (SMA) are the most frequent motor neuron disorders in adulthood and infancy, respectively. There is a growing literature supporting common pathophysiological patterns between those disorders. One important clinical issue for that is the co-occurrence of both diseases within a family. To collect families in which ALS and SMA patients co-exist and describe the phenotype and the genotype of ALS patients. Nine families with co-occurrence of SMA and ALS have been gathered over the last 15 years. Epidemiological, phenotype and genetic status were collected. Out of the nine families, six corresponded to the criteria of familial ALS (FALS). Clinical data were available for 11 patients out of the 15 ALS cases. Mean age of onset was 58.5 years, site of onset was lower limbs in nine cases (81.8%), median duration was 22 months. Four ALS patients carried a mutation: three mutations in SOD1 gene (G147N in two cases and one with E121G) and one repeat expansion in the C9ORF72 gene. Three patients had abnormal SMN1 copy numbers. While the high proportion of familial history of ALS cases in these ALS-SMA pedigrees could have suggested that these familial clusters of the two most frequent MND rely on a genetic background, we failed to exclude that this occurred by chance.

Eutectic microstructures of Al-ThA13 and Al-UA14 alloys

International Nuclear Information System (INIS)

Vieira, R.R.; Ambrozio Filho, F.

1990-01-01

This paper deals on the microstructures of systems Al-ThAl3 and Al-UAL4, which are composed by a non faceted phase (aluminium) and an intermetallic phase (ThAl3 or UAL4) which is normally faceted phase. (C.M.)

Interface reactions in the Al-Si-SiC and Mg-Al-Al{sub 2}O{sub 3} composite systems

Energy Technology Data Exchange (ETDEWEB)

Johnson, P.K. [Commission of the European Communities, Petten (Netherlands). Inst. for Advanced Materials; Fazal-Ur-Rehman [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; Fox, S. [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; Flower, H.M. [Imperial Coll. of Science, Technology and Medicine, London (United Kingdom). Dept. of Materials; West, D.R.F.

1995-12-31

Structural and compositional observations are reported on the influence of the interfaces on the mechanisms and kinetics of liquid metal-ceramic reactions in Al-SiC, Al-Si-SiC, Mg-Al{sub 2}O{sub 3} and Mg-Al-Al{sub 2}O{sub 3} composites. The aluminium based materials contained up to 20 vol% SiC in particulate form, and were produced by a spray casting process; subsequently the interface reactions were studied in samples heated to temperatures up to 1100 C. The reaction product was Al{sub 4}C{sub 3} in both Al-SiC and Al-Si-SiC composites. The influence of the crystallography and topology of the SiC particle surfaces on the nucleation of the Al{sub 4}C{sub 3} has been demonstrated; surface asperities play an important role. Growth of nuclei proceeds to form continuous reaction product layers which control the subsequent kinetics. The magnesium based composites contained 5 vol% Al{sub 2}O{sub 3} fibres (3 {mu}m in diameter), and were produced by a liquid infiltration process. SD Safimax fibres with relatively low and high porosity, and also RF Saffil fibres, with a silica binder, were investigated. Fibre porosity plays a major role in accelerating the penetration of Mg into the fibres with reaction to form MgO. Silica binder on the fibre surface transforms to MgO. The reaction rate was reduced by the presence of aluminium in the matrix. The factors controlling the reactions in the aluminium and magnesium based composites are compared. (orig.)

KONSTRUKSI FIQH BUKHARI DALAM KITAB AL-JAMI’ AL-SHAHIH

Directory of Open Access Journals (Sweden)

Abdul Sattar

2011-06-01

Popularitas Imam Bukhari sebagai penyusun kitab Hadits memiliki posisi yang tinggi di kalangan masyarakat muslim. Kitab Al-Jami ‘al-Shahih karya Imam  Bukhari dianggap sebagai koleksi hadits terbaik setelah Quran. Namun, tidak ada banyak informasi tentang kemampuannya di bidang Hukum Islam (fiqh. Ada beberapa pertanyaan yang dapat diajukan dalam hal tersebut;  pertama, apakah pemikiran Imam Bukhari dipengaruh salah satu dari empat fuqaha Sunni saat menulis al-Jami ‘al-Shahih?. Kedua, apa yang diupayakan Imam Bukhari untuk mengartikulasikan pemikirannya tentang hukum Islam? Dengan menggunakan pendekatan eksploratif, verifikatif dan hermenetical, artikel ini akan mengungkapkan bahwa Imam Bukhari tidak berada di bawah pengaruh madhab tertentu dalam mengartikulasikan pemikirannya tentang hukum Islam. Dia mengartikulasikan pandangannya dengan cara yang unik dan execelent berdasarkan kapasitasnya sebagai muhaddits.

La "historia de los omeyas de al-Andalus" en los Masalik al-Absar

OpenAIRE

Molina, Luis

2005-01-01

[ES]Los Masalik al-absar de Ibn Fadl Allah al-`Umari incluyen un breve resumen de la Historia de los omeyas de al-Andalus. En este trabajo se analizan las relaciones textuales entre ese pasaje y el Muqtabis de Ibn Hayyan, crónica que resulta ser la fuente casi única utilizada por al-`Umari para redactar ese capítulo. [EN]The Masalik al-absar by Ibn Fadl Allah al-`Umari contains a brief summary of the Umayyad history in al-Andalus. In this article, the textual relationship between this p...

Cryptanalysis of Lin et al.'s Efficient Block-Cipher-Based Hash Function

NARCIS (Netherlands)

Liu, Bozhong; Gong, Zheng; Chen, Xiaohong; Qiu, Weidong; Zheng, Dong

2010-01-01

Hash functions are widely used in authentication. In this paper, the security of Lin et al.'s efficient block-cipher-based hash function is reviewed. By using Joux's multicollisions and Kelsey et al.'s expandable message techniques, we find the scheme is vulnerable to collision, preimage and second

From Kitāb al-ḥadā’iq to Kitāb al-dawā’ir: Reconsidering Ibn al-Sīd al-Batalyawsī’s Philosophical Treatise

Directory of Open Access Journals (Sweden)

Eliyahu, Ayala

2015-06-01

Full Text Available The philosophical treatise known as Kitāb al-ḥadā’iq is generally ascribed to the 12th century Andalusian author Ibn al-Sīd al-Batalyawsī, although this attribution is sometimes contested. This paper offers a new interpretation of the title, textual history, authorship, sources, and literary genre of this treatise, on the basis of new textual evidence, a reexamination of known evidence, and a comparison between the treatise and Batalyawsī’s works. The conclusions of this study are first, that Kitāb al-ḥadā’iq was not the treatise’s original title, and therefore it should be renamed Kitāb al-dawā’ir; second, that Kitāb al-dawā’ir was originally part of (one of the versions of Batalyawsī’s Kitāb al-masā’il; and third, that the textual and stylistic similarities between this treatise and Batalyawsī’s other works prove the authenticity of the treatise’s attribution to Batalyawsī. In addition, new findings regarding Batalyawsī’s use of formulas from the Rasā’il Ikhwān al-Safā, in Kitāb al-dawā’ir and Kitāb al-masā’il provide further evidence for the deep impact of the Ikhwān on Batalyawsī’s thought, as well as for the close connection between Kitāb al-dawā’ir and Kitāb al-masā’il. This connection is further highlighted according to the attribution of both treatises to the genre of questions and answers in Arabic literature. The evidence gathered in this paper supports the claim that Batalyawsī’s Kitāb al-dawā’ir should be seen as an integral part of his literary oeuvre, as well as of Andalusian philosophical literature in general.Generalmente el tratado filosófico conocido como Kitāb al-ḥadā’iq se asocia al autor andalusí del siglo XII Ibn al-Sid al-Batalyawsī, aunque esta atribución ha sido discutida en ocasiones. Este artículo ofrece una nueva interpretación del título, la historia del texto, la autoría, las fuentes e incluso del género literario al que se

Theory and X-ray Absorption Spectroscopy for Aluminum Coordination Complexes – Al K-Edge Studies of Charge and Bonding in (BDI)Al, (BDI)AlR2, and (BDI)AlX2 Complexes.

Science.gov (United States)

Altman, Alison B; Pemmaraju, C D; Camp, Clément; Arnold, John; Minasian, Stefan G; Prendergast, David; Shuh, David K; Tyliszczak, Tolek

2015-08-19

Polarized aluminum K-edge X-ray absorption near edge structure (XANES) spectroscopy and first-principles calculations were used to probe electronic structure in a series of (BDI)Al, (BDI)AlX2, and (BDI)AlR2 coordination compounds (X = F, Cl, I; R = H, Me; BDI = 2,6-diisopropylphenyl-β-diketiminate). Spectral interpretations were guided by examination of the calculated transition energies and polarization-dependent oscillator strengths, which agreed well with the XANES spectroscopy measurements. Pre-edge features were assigned to transitions associated with the Al 3p orbitals involved in metal-ligand bonding. Qualitative trends in Al 1s core energy and valence orbital occupation were established through a systematic comparison of excited states derived from Al 3p orbitals with similar symmetries in a molecular orbital framework. These trends suggested that the higher transition energies observed for (BDI)AlX2 systems with more electronegative X(1-) ligands could be ascribed to a decrease in electron density around the aluminum atom, which causes an increase in the attractive potential of the Al nucleus and concomitant increase in the binding energy of the Al 1s core orbitals. For (BDI)Al and (BDI)AlH2 the experimental Al K-edge XANES spectra and spectra calculated using the eXcited electron and Core-Hole (XCH) approach had nearly identical energies for transitions to final state orbitals of similar composition and symmetry. These results implied that the charge distributions about the aluminum atoms in (BDI)Al and (BDI)AlH2 are similar relative to the (BDI)AlX2 and (BDI)AlMe2 compounds, despite having different formal oxidation states of +1 and +3, respectively. However, (BDI)Al was unique in that it exhibited a low-energy feature that was attributed to transitions into a low-lying p-orbital of b1 symmetry that is localized on Al and orthogonal to the (BDI)Al plane. The presence of this low-energy unoccupied molecular orbital on electron-rich (BDI)Al distinguishes

El conocimiento y difusión del Patrimonio Histórico-Educativo de Andalucía en internet a través del museo pedagógico andaluz

Directory of Open Access Journals (Sweden)

Pablo Álvarez Domínguez

2010-06-01

Full Text Available (ES El uso del Museo Didáctico Virtual del Patrimonio Histórico-Educativo Andaluz -ligado al aprovechamiento de las potencialidades educativas de las nuevas tecnologías de la información y la comunicación a través de Internet-, viene a poner de manifiesto que el conocimiento y difusión del patrimonio histórico-educativo de Andalucía es un nuevo yacimiento cultural y socioformativo para el desarrollo de la humanidad y de la Historia de la Educación. A través de este trabajo, hemos tratado de aportar una serie de reflexiones a modo de propuestas, ligadas a contribuir al impulso de un proyecto museológico y museográfico virtual que aspira a convertirse en un ente cultural al servicio de la sociedad y en un nuevo espacio de educación y conservación, apto para propiciar la conservación, exposición y difusión del patrimonio histórico-educativo de Andalucía.

La educación secundaria en Perú y sus profesores: cambios y continuidades

Directory of Open Access Journals (Sweden)

Jerson Chuquilin Cubas

2011-01-01

Full Text Available Desde el momento en el que se constituyó el nuevo Estado peruano independiente del poder político español, el poder estatal se encargó de fundar y normar la organización y funcionamiento de las instituciones que conforman lo que hoy se conoce como sistema educativo. Dentro de este proceso, la educación secundaria ha experimentado desarrollos peculiares que la diferencian de los otros niveles educativos en lo que se refiere a las instituciones en las que se imparte, sus propósitos, la formación de sus profesores, las posiciones instituidas y el sentido asignado al quehacer docente y directivo. Así, la educación secundaria nació ligada a la educación superior universitaria y al servicio de una minoría privilegiada. Sus profesores, de una élite privilegiada al servicio del proyecto homogeneizador del Estado, han transitado hacia una situación de deterioro de sus condiciones de vida y desvalorización de su trabajo.

Thermodynamic properties of Al-Mn, Al-Cu, and Al-Fe-Cu melts and their relations to liquid and quasicrystal structure

International Nuclear Information System (INIS)

Zaitsev, A I; Zaitseva, N E; Shimko, R Yu; Arutyunyan, N A; Dunaev, S F; Kraposhin, V S; Lam, Ha Thanh

2008-01-01

Thermodynamic properties of molten Al-Mn, Al-Cu and Al-Fe-Cu alloys in a wide temperature range of 1123-1878 K and the whole range of concentrations have been studied using the integral effusion method and Knudsen mass spectrometry. Thermodynamic functions of melts were described by the associated solution model. The possibility of icosahedral quasicrystal (i-QC) precipitation from liquid Al-Mn and Al-Cu-Fe alloys was found to be a consequence of the existence in liquid associates (clusters). A geometric model is suggested for the structure of associates in liquid

Sintering Behavior of CNT Reinforced Al6061 and Al2124 Nanocomposites

Directory of Open Access Journals (Sweden)

Nouari Saheb

2014-01-01

Full Text Available Ball milling and spark plasma sintering were successfully used to produce carbon nanotube reinforced Al6061 and Al2124 nanocomposites which have potential applications in the fields of aerospace, automotive, electronics, and high precision instrumentation. Al2124 and Al6061 nanocomposite powders containing 0.5 to 2 wt.% CNTs prepared through sonication and wet ball milling were spark plasma sintered at 400, 450, and 500°C for 20 minutes under a pressure of 35 MPa. CNTs were better dispersed, and less agglomerated and had good adhesion to the matrix in composites containing 1 wt.% CNTs. The increase of CNT content to 2 wt.% led to the formation of CNT clusters which resulted in less uniform and homogenous composite powders. Almost full densification of Al6061 reinforced with CNTs was achieved at 500°C. Also, CNTs reinforced Al2124 nanocomposites reached very high densities at 500°C. Composites reinforced with 1 wt.% CNTs displayed better densification compared to composites containing 2 wt.% CNTs. The increase of CNTs content from 0.5 to 1 wt.% increased the hardness of the Al6061 and Al2124 alloys to maximum values. Further increase of CNTs content to 2 wt.% decreased the hardness to values lower than that of the monolithic alloys.

Cuerpos en venta: pinguerismo y masculinidad negociada en la Cuba contemporánea

Directory of Open Access Journals (Sweden)

Abel Sierra Madero

2013-04-01

Full Text Available El artículo da cuenta de la investigación sobre sujetos masculinos insertados dentro de la economía informal de placeres ligada al turismo en Cuba (pingueros. Se analizan los modos en que los pingueros negocian la masculinidad y la identidad en sus interacciones con los extranjeros, mediante el estudio de su desempeño en las redes homoeróticas en La Habana, así como los conceptos de género y sexualidad, por un lado, y de nación y sobrevivencia, por otro, que allí construyen. Se finaliza con la relación entre turismo sexual y las contradicciones del modelo revolucionario.

Tetragonal phase in Al-rich region of U-Fe-Al system

International Nuclear Information System (INIS)

Meshi, L.; Zenou, V.; Ezersky, V.; Munitz, A.; Talianker, M.

2005-01-01

A new ternary aluminide U 2 FeAl 20 with the approximate composition Al-4.2at% Fe-8.5at% U was observed in the Al-rich corner of the U-Al-Fe system. Transmission electron microscopy and electron microdiffraction technique were used for characterization of the structure of this phase. It has a tetragonal unit cell with the parameters a=12.4A and c=10.3A and can be described by the space group I4-bar 2m

Ilhaq al-Masa'il bi Nazairiha dan Penerapannya dalam Bahth al-Masa'il

Directory of Open Access Journals (Sweden)

Luthfi Hadi Aminuddin

2013-11-01

Full Text Available Abstract: Ilh}a>q al-Masa>’il bi Naz}a>iriha is one of the methods used by Nahdlatul Ulama in resisting the opinion based on (manhaji analytical concept of Islamic jurisprudence (the solution for complex social problems as the main purpose of Islamic shari’ah. As known that, up to now, ilh}a>q has been understood as a process of answering a new case by the way of equating to the old one which is written in the book called al-mu’tabarah. Such ilh}a>q has got many criticisms both from the definitions, procedures and its epistemogical footing. This paper is about to reveal how the NU clerics of Islam understand the concept of Ilh}a>q}, what its epistemological footing was and how the concept was applied in discussing many cases (bah}th al-masa>’il. Based on the writer’s study to several documents of decision results of NU that Ilh}a>q did not only simplify to equate the new cases with the old ones that have been freely discussed in the books of al-mu’tabarah, but both cases should have similar legal substance, that is, both should be under the decrees of laws of al-qawa> ‘id al-fiqhi>yah. Thus, Ilh}a>q is actually answering the problem by applying al-qawa>‘id al-fiqhi>yah, whereas the formulation al-qawa>‘id al-fiqhi>yah itself was set off from the examination of a number of furu>’ generated by qiya> s. This paper also found three variations of the implementation of Ilh}a>q in bah}th al-masa>’il. First, the application of Ilh}a>q was without mentioning al-qawa> ‘id al-fiqhi>yah which covered new cases (mulh}aq and the old case law that has been known in the books of fiqh (mulh}aq bih/attached to. Second, the application of Ilh}a>q was accompanied by mentioning mulh}aq bih and al-qawa> ‘id al-fiqhi>yah. Third, the application of Ilh}a>q, was only by the mentioning al-qawa> ‘id al-fiqhi>yah.

Nanoindentation studies of ex situ AlN/Al metal matrix nanocomposites

International Nuclear Information System (INIS)

Fale, Sandeep; Likhite, Ajay; Bhatt, Jatin

2014-01-01

Highlights: • Formation of in-situ phases nucleated on AlN particles strengthens the matrix. • Formation of in-situ phases increases with AlN content in nanocomposites. • Stronger in-situ phases results in increased hardness and modulus of elasticity. - Abstract: Nanocrystalline Aluminium nitride (AlN) powder is dispersed in different weight ratio in Aluminum matrix to fabricate metal matrix nanocomposite (MMNC) using ex situ melt metallurgy process. The synthesized Al–AlN nanocomposites are studied for phase analysis using high resolution scanning electron microscopy (FEG-SEM) and for hardness behavior using microindentation and nanoindentation tests. Quantitative analysis of the oxide phases is calculated from thermodynamic data and mass balance equation using elemental data obtained from energy dispersive spectroscopy (EDS) results. Role of oxide phases in association with AlN particles is investigated to understand the mechanical behavior of composites using nanoindentation tester. Load–displacement profile obtained from nanoindentation test reveals distribution of oxide phases along with AlN particle and their effect on indent penetration

Isothermal cross-sections of Sr-Al-Ge and Ba-Al-Ge systems at 673 K

International Nuclear Information System (INIS)

Kutsenok, N.L.; Yanson, T.I.

1987-01-01

X-ray and microstructural analyses are used to study phase equilibria in Sr-Al-Ge and Ba-Al-Ge systems. Existence of SrAl 2 Ge 2 , Sr(Al, Ge) 2 Ba(Al, Ge) 2 , Sr 3 Al 2 Ge 2 , Ba 3 Al 2 Ge 2 ternary compounds is confirmed, a new BaGe 4 binary compound and also new ternary compounds of approximate composition Sr 57 Al 30 Ge 13 and Ba 20 Al 40 Ge 40 , which crystal structure is unknown, are detected. Aluminium solubility in SrAl 4 and BaAl 4 binary compounds (0.05 atomic fraction) is determined. Ba(Al, Ge) 2 compound homogeneity region is defined more exactly (aluminium content varies from 0.27 to 0.51 at. fractions)

Production of 26Al by spallation of Fe, Si, Al nuclei

International Nuclear Information System (INIS)

Paillard, P.

1977-01-01

Cross sections for 7 Be, 10 Be and 26 Al formation in Al, Si and Fe targets bombarded with 0.6 and 24GeV protons have been measured by using highly selective chemical separation and low level background counters. Results for 26 Al at 0.6GeV are in mb: 17.9 + or - 2.7 in Al, 12.5 + or - 2.5 in Si and 0.45 + or - 0.14 in Fe; at 24GeV 2.6 + or - 0.5mb in Fe. Results for 10 Be are not valid on account of experimental difficulties. It is deduced from these values of aluminium in cosmic ray propagation that 26 Al is not yet cosmic ray chronometer [fr

Del juego antiguo al juego de computadora. Papel histórico del juego en el desarrollo de la tecnología digital.

Directory of Open Access Journals (Sweden)

Francisco Borja López Barinaga

2012-04-01

Full Text Available El juego de computadora parece que es un fenómeno original de los tiempos modernos pero sus raíces se hunden en un pasado que marcó la forma de entender la Naturaleza en la cultura de Occidente. En la actualidad, las tecnologías ligadas a la creación de videojuegos son las principales impulsoras del desarrollo de la tecnología digital y esta está directamente relacionada, de una u otra manera, con los mayores avances industriales y culturales del siglo XXI. El juego y las llamadas máquinas inteligentes, autómatas y computadoras de todo tipo, han ido evolucionando juntas desde la Antigüedad y son reflejo de una forma particular de racionalizar la experiencia del hombre.

143 - 148_Makeri et al.

African Journals Online (AJOL)

USER

2015-06-01

Jun 1, 2015 ... Yuan et al., 2003), antimicrobial activity (Sundarrao et al., 1993; Betancur-Galvis et al., 1999; Takashi et al., 2006), anti-parasitic, anti-malarial activities (Alali et al., 1998; Jaramillo et al., 2000; Luna et al.,. 2005). This study evaluates the antibacterial activity of extract of stem –bark and leaf extracts of Annona.

Phase relationships in the Al-rich region of the Al-Cu-Er system

International Nuclear Information System (INIS)

Zhang Ligang; Masset, Patrick J.; Cao Fuyong; Meng Fangui; Liu Libin; Jin Zhanpeng

2011-01-01

Research highlights: → One ternary phase τ 1 -Al 8 Cu 4 Er in Al-rich region with a composition of 59.4-60.4 at.% Al, 32.2-33.8 at.% Cu, and 6.4-7.7 at.% Er is observed in both as-cast and annealed alloys. At 673 K, the binary Al 3 Er phase dissolves about 3.51 at.% Cu. → The calculated solidification paths (based on the CALPHAD method) of as-cast alloys are in agreement with the experimental results. → It can be found that the resultant thermodynamic database can be applied to case studies of as-cast alloys, showing that the literature thermodynamic description of the Al-Cu-Er system is reliable as a working basis for computer-assisted alloy design. - Abstract: The Al-rich region of the ternary Al-Cu-Er system is investigated using the method of X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy. Phase equilibria in the Al-rich region of the Al-Cu-Er system at 673 K have been obtained, and the microstructures of as-cast alloys in the Al-rich region are also investigated. One ternary phase τ 1 -Al 8 Cu 4 Er with a composition of 59.4-60.4 at.% Al, 32.2-33.8 at.% Cu, and 6.4-7.7 at.% Er is observed in both as-cast and annealed alloys. At 673 K, the binary Al 3 Er phase dissolves about 3.51 at.% Cu. The calculated solidification paths (based on the CALPHAD method) of as-cast alloys are in agreement with the experimental results.

Mechanical properties and deformation behavior of Al/Al7075, two-phase material

International Nuclear Information System (INIS)

Sherafat, Z.; Paydar, M.H.; Ebrahimi, R.; Sohrabi, S.

2010-01-01

In the present study, mechanical properties and deformation behavior of Al/Al7075, two-phase material were investigated. The two-phase materials were fabricated by mixing commercially pure Al powder with Al7075 chips and consolidating the mixture through hot extrusion process at 500 o C. Mechanical properties and deformation behavior of the fabricated samples were evaluated using tensile and compression tests. A scanning electron microscope was used to study the fracture surface of the samples including different amount of Al powder, after they were fractured in tensile test. The results of the tensile and compression tests showed that with decreasing the amount of Al powder, the strength increases and ductility decreases. Calculation of work hardening exponent (n) indicated that deformation behavior does not follow a regular trend. In a way that the n value was approved to be variable and a strong function of strain and Al powder wt% of the sample. The results of the fractography studies indicate that the type of fracture happened changes from completely ductile to nearly brittle by decreasing the wt% of Al powder from 90% to 40%.

A Scholar from Saray: Mawlana Zada al-Sarayi (754/1353–791/1389 in the Biographical Dictionary of Taqi al-Din al-Maqrizi (766/1365–845/1441 “Kitab al-Muqaffa al-Kabir” (The Great Rhymed Book

Directory of Open Access Journals (Sweden)

D.R. Zaynuddinov

2017-03-01

Full Text Available Research objective: to introduce into academic circulation previously unknown source on the Golden Horde history. Research materials: biographical dictionary of Taqi al-Din al-Maqrizi (766/1365 – 845/1441 “Kitab al-Muqaffa al-Kabir” (The Great Rhymed Book. Results and novelty of the research: This article contains materials from the works of historians engaged in the narrative biography, which V.G. Tiesenhausen did not include in his “Collection of Materials on the Golden Horde history (extract from Arab writings”, although their writings contain very valuable information about the Golden Horde History. Research novelty consists in the fact that the author of this article presents one paragraph from biographical dictionary of Taqi al-Din al-Maqrizi, whose article number 421 provides information about a scholar from Saray – Mawlana Zada al-Sarayi. The author provides its translation and commentary referring to the more than ten medieval Arab sources. After receiving basic education at home, Mawlana Zada al-Sarayi traveled to many Eastern countries in search of knowledge and after having received high recognition he settled in Cairo as a teacher of Sharia Sciences. Despite the fact that his life was interrupted at an early age (36 years, he left a deep mark in science. His son Muhibbu al-Din (Cairo, 791/1389 – Mecca, Friday, the 3rd of Dhu al-Hijjah 859/13 November 1455 also became a great scholar as well as an imam of Sultan al-Ashraf Barsbay himself and other sultans after him. Nisba al-Sarayi sounded on the lips of the Ulema of the East as a symbol of learnedness and high temper. As a result of research it must be said that the study of life of Mawlana Zada al-Sarayi (754/1353 – 791/1389 and the number of migrants from Desht-i Kipchak in Egypt will help researchers in a deeper and more detailed study of the Golden Horde history.

Improved AlGaN/GaN HEMTs Grown on Si Substrates Using Stacked AlGaN/AlN Interlayer by MOCVD

International Nuclear Information System (INIS)

Wang Yong; Yu Nai-Sen; Li Ming; Lau Kei-May

2011-01-01

AlGaN/GaN high electron mobility transistors (HEMTs) are grown on 2-inch Si (111) substrates by MOCVD. The stacked AlGaN/AlN interlayer with different AlGaN thickness and indium surfactant doped is designed and optimized to relieve the tensile stress during GaN epitaxial growth. The top 1.0μm GaN buffer layer grown on the optimized AlGaN/AlN interlayer shows a crack-free and shining surface. The XRD results show that GaN(002) FWHM is 480 arcsec and GaN(102) FWHM is 900 arcsec. The AGaN/GaN HEMTs with optimized and non-optimized AlGaN/AlN interlayer are grown and processed for comparison and the dc and rf characteristics are characterized. For the dc characteristics of the device with optimized AlGaN/AlN interlayer, maximum drain current density I dss of 737mA/mm, peak transconductance G m of 185mS/mm, drain leakage current density I ds of 1.7μA/mm, gate leakage current density I gs of 24.8 μA/mm and off-state breakdown voltage V BR of 67 V are achieved with L g /W g /L gs /L gd = 1/10/1/1 μm. For the small signal rf characteristics of the device with optimized AlGaN/AlN interlayer, current gain cutoff frequency f T of 8.3 GHz and power gain cutoff frequency f max of 19.9 GHz are achieved with L g /W g /L gs /L gd = 1/100/1/1 μm. Furthermore, the best rf performance with f T of 14.5 GHz and f max of 37.3 GHz is achieved with a reduced gate length of 0.7μm. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Konsepsi Ibnu Jarir Al-Tabari Tentang Al-Qur’an, Tafsir Dan Ta’wil

Directory of Open Access Journals (Sweden)

A.M Ismatulloh

2012-12-01

Full Text Available The objective of this research is to describe the concept of Ibnu Jarir al-Tabari about al-Qur’an, tafsir and ta’wil. Ibn Jarir al-Tabari is an outstanding expert in the classic Islamic tradition. His knowledge in hadits, fiqh, lughah, history, and tafseer is unquestionable. This study uses an analytical descriptive design. The findings show that: Firstly, in defining al-Qur’an, al-Tabari focused on the al-Qur’an as an Arabic language text, not in other language. Secondly, al-Qur’an is written in sab’ah ahruf. It means that there are 7 different kinds of language with the same meaning. Thirdly, al-Qur’an comes from seven heaven’s door. Fourthly, there is no different word between tafseer and ta’wil. They have same meaning. These concepts are different to other concepts proposed by other ulama.

A pouca visibilidade da mulher brasileira no tráfico de drogas La invisibilidad de la mujer brasilera ligada al tráfico de drogas The low visibility of the brazilian woman in the drug trafficking

Directory of Open Access Journals (Sweden)

Kátia Ovídia José de Souza

2009-12-01

Full Text Available Entre os estudos sobre a violência de gênero e violência conjugal, a atenção recai sobre a mulher como vítima. Sem minimizar a importância desta questão, com base em uma discussão teórica com autores da área da saúde e da sociologia em saúde da década de 2000, este artigo tem como objetivo investigar a violência feminina. A literatura sobre violência de gênero tem poucas referências sobre a visibilidade da mulher como autora de atos de violência, especificamente o tráfico de drogas, o principal motivo do aprisionamento de mulheres nos últimos anos, o qual contribui para o aumento dos índices da mulher como autora de atos de violência. Deste modo, este artigo tenta contribuir com o conhecimento sobre a temática violência feminina, tema pouco estudado.Entre los estudios sobre violencia de género y violencia conyugal, la atención recae sobre la mujer como víctima. Sin restar importancia a esta cuestión, con base en la discusión teórica basada en autores del área de la salud y de la sociología de la salud en la década de 2000, este artículo tiene como objetivo investigar la violencia femenina. En la literatura sobre violencia de género se encuentran escasas referencias sobre la visibilidad de la mujer como autora de actos violentos, específicamente, como participante en el tráfico de drogas; aún siendo este el principal motivo de prisión entre mujeres en los últimos años, y un hecho que sin duda contribuye al aumento de los índices de la mujer como autora de actos de violencia. Así, este artículo se propone a contribuir al conocimiento sobre la violencia femenina, tema escasamente trabajado.Between the studies about gender and marital violence, the focus is more on women as victims of violence. This situation is important, but based on a theoretical discussion with authors of the health and sociology health field during the decade 2000, this article aims to investigate the feminine violence. In the

Predicting glass-forming compositions in the Al-La and Al-La-Ni systems

International Nuclear Information System (INIS)

Gargarella, P.; de Oliveira, M.F.; Kiminami, C.S.; Pauly, S.; Kuehn, U.; Bolfarini, C.; Botta, W.J.; Eckert, J.

2011-01-01

Research highlights: → The glass-forming ability of the Al-La and Al-La-Ni systems was studied using the λ* and the λ.Δe criteria. → Both criteria predicted with just 1% at. of error the best glass-former verified so far in the Al-La system. → Four new glass-former compositions could be predicted in the Al-La-Ni system using the λ.Δe criterion. → The best glass-former reported so far in the Al-La-Ni system was found. - Abstract: In this work, a criterion considering the topological instability (λ) and the differences in the electronegativity of the constituent elements (Δe) was applied to the Al-La and Al-Ni-La systems in order to predict the best glass-forming compositions. The results were compared with literature data and with our own experimental data for the Al-La-Ni system. The alloy described in the literature as the best glass former in the Al-La system is located near the point with local maximum for the λ.Δe criterion. A good agreement was found between the predictions of the λ.Δe criterion and literature data in the Al-La-Ni system, with the region of the best glass-forming ability (GFA) and largest supercooled liquid region (ΔT x ) coinciding with the best compositional region for amorphization indicated by the λ.Δe criterion. Four new glassy compositions were found in the Al-La-Ni system, with the best predicted composition presenting the best glass-forming ability observed so far for this system. Although the λ.Δe criterion needs further refinements for completely describe the glass-forming ability in the Al-La and Al-La-Ni systems, the results demonstrated that this criterion is a good tool to predict new glass-forming compositions.

Electric quadrupole moments of neutron-rich nuclei {sup 32}Al and {sup 31}Al

Energy Technology Data Exchange (ETDEWEB)

Kameda, D., E-mail: kameda@ribf.riken.jp; Ueno, H. [RIKEN Nishina Center (Japan); Asahi, K.; Nagae, D.; Takemura, M.; Shimada, K. [Tokyo Institute of Technology, Department of Physics (Japan); Yoshimi, A.; Nagatomo, T.; Sugimoto, T. [RIKEN Nishina Center (Japan); Uchida, M.; Arai, T.; Takase, K.; Suda, S.; Inoue, T. [Tokyo Institute of Technology, Department of Physics (Japan); Murata, J.; Kawamura, H. [Rikkyo University, Department of Physics (Japan); Watanabe, H. [Australian National University, Department of Nuclear Physics (Australia); Kobayashi, Y.; Ishihara, M. [RIKEN Nishina Center (Japan)

2007-11-15

The electric quadrupole moments for the ground states of {sup 32}Al and {sup 31}Al have been measured by the {beta} ray-detected nuclear quadrupole resonance method. Spin-polarized {sup 32}Al and {sup 31}Al nuclei were obtained from the fragmentation of {sup 40}Ar projectiles at E/A = 95 MeV/nucleon, and were implanted in a single crystal {alpha}-Al{sub 2}O{sub 3} stopper. The measured Q moment of {sup 32}Al, |Q({sup 32}Al)| = 24(2) mb, is in good agreement with a conventional shell-model calculation with a full sd model space and empirical effective charges, while that of {sup 31}Al is considerably smaller than the sd calculations.

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

International Nuclear Information System (INIS)

Markoli, B.; Spaic, S.; Zupanic, F.

2001-01-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation (α Al , β Si , Al 3 Sm, Al 2 Si 2 Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L → α Al + β Si + Al 2 Si 2 Sm, and two liquidus transition reactions, i. e., L + Al 3 Sm → α Al + AlSiSm, and L + AlSiSm → α Al + Al 2 Si 2 Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

Disordered crystal structure of 20H-AlON, Al10O3N8

International Nuclear Information System (INIS)

Banno, Hiroki; Funahashi, Shiro; Asaka, Toru; Hirosaki, Naoto; Fukuda, Koichiro

2015-01-01

The disordered crystal structure of 20H-AlON (Al 10 O 3 N 8 ) was determined by combined use of X-ray powder diffraction and transmission electron microscopy. The title compound is hexagonal with space group P6 3 /mmc (Z=2) and the unit-cell dimensions are a=0.307082(5) nm, c=5.29447(8) nm and V=0.432376(12) nm 3 . The structural model showed the positional disordering of three of the six Al sites in the unit cell. The reliability indices calculated from the Rietveld method were R wp =6.97%, S (=R wp /R e )=1.68, R p =5.45%, R B =5.13% and R F =4.56%. We interpreted the disordered structure of 20H-AlON as a statistical average of six different types of ordered structural configurations, which are composed of an octahedral [Al(O, N) 6 ] layer and tetrahedral [Al(O, N) 4 ] layers. We demonstrated the high correlations between the hexagonal unit-cell dimensions and the octahedral layer concentrations for AlON and SiAlON polytypoids. - Graphical abstract: Variations of a and c/(n O +n T ) with n O /(n O +n T ). The a and c are the hexagonal unit-cell dimensions of AlON, SiAlON and AlN. The n O and n T are, respectively, the numbers of octahedral and tetrahedral layers in the unit cells. The unit-cell dimensions in literature are plotted in black plus for AlON and black cross for SiAlON. The unit-cell dimensions of AlN are a=0.3110 nm and c=0.4980 nm. - Highlights: • Crystal structure of Al10O3N8 is determined by laboratory X-ray powder diffraction. • The atom arrangements are represented by the split-atom model. • Six types of ordered atom arrangements are derived from the disordered structure. • Hexagonal unit-cell dimensions changed systematically for AlON and SiAlON compounds

Prinsip Pendidikan Karakter dalam Islam: Studi Komparasi Pemikiran Al-Ghazali dan Burhanuddin Al-Zarnuji

Directory of Open Access Journals (Sweden)

Agus Setiawan

2014-06-01

Full Text Available The impelemtantion of character education that is done by the Indonesian government recently has been provoked by al-Ghazali and Burhanuddin al-Zarnuji long ago. It was proven by some written thoughts of al-Ghazali and Burhanuddin al-Zarnuji. They were very famous scientists in their era and widely welknown as educational experts who produced some phenomenal thoughts many people use today. Al-Ghazali and Burhanuddin al-Zarnuji lived in the era of Bani Abbasiyah monarchy, but Both of them lived in different era. Al-Ghazali was born first, then Burhanuddin al-Zarnuji. They had different mazhab, al-Ghazali went to the traditional principle of mazhab Syafi’I and Burhanuddin al-Zarnuji went to the modern principle of mazhab Hanafi. The differences, of course, would create a different thought. Still, they might have a similar principle of Islamic character education. The thoughts of character education of al-Ghazali have been poured in the “Ayyuha Walad” focusing to the students’ character building characterized by religiously obedient, skillfull of general and religious knowledge, socially helpful, affectionate, generous, good citizen, and coloring the society. Some applicable thoughts of character education of Ayyuha al-Walad of al-Gazhali to the contemporary education are: the balance of the happiness purposes of the recent life and the life after death, qana’ah and tawakal, affectionate, caring other, patience, honesty, philanthrophy, social works, generousity, democratic, peace makers, and patriotic. Those characters are also directed in the islamic character education nowdays. So that, the thoughts of al-Ghazali positively and responsively are absorbed by the Indonesian government to build the national character widely implementing in the national curriculum based on the local wisdom and the Islamic values. In the end, the students are able to live happily based on the Islamic rules by implementing the good behavior. Similar to the al

FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY

Directory of Open Access Journals (Sweden)

M. S. Kaiser

2014-12-01

Full Text Available The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were also studied using JMAK type analysis to see if there exists any correlation between the methods. Recrystallization fraction behavior between two methods the scandium added alloys show the higher variation due to precipitation hardening and higher recrystallization behavior. The scandium and zirconium as a combined shows the more variation due to formation of Al3(Sc, Zr precipitate. From the microstructure it is also observed that the base Al-Mg alloy attained almost fully re-crystallized state after annealing at 400 °C for 60 minutes

Chemical failure modes of AlQ3-based OLEDs: AlQ3 hydrolysis.

Science.gov (United States)

Knox, John E; Halls, Mathew D; Hratchian, Hrant P; Schlegel, H Bernhard

2006-03-28

Tris(8-hydroxyquinoline)aluminum(III), AlQ3, is used in organic light-emitting diodes (OLEDs) as an electron-transport material and emitting layer. The reaction of AlQ3 with trace H2O has been implicated as a major failure pathway for AlQ3-based OLEDs. Hybrid density functional calculations have been carried out to characterize the hydrolysis of AlQ3. The thermochemical and atomistic details for this important reaction are reported for both the neutral and oxidized AlQ3/AlQ3+ systems. In support of experimental conclusions, the neutral hydrolysis reaction pathway is found to be a thermally activated process, having a classical barrier height of 24.2 kcal mol(-1). First-principles infrared and electronic absorption spectra are compared to further characterize AlQ3 and the hydrolysis pathway product, AlQ2OH. The activation energy for the cationic AlQ3 hydrolysis pathway is found to be 8.5 kcal mol(-1) lower than for the neutral reaction, which is significant since it suggests a role for charge imbalance in promoting chemical failure modes in OLED devices.

Study on Mg/Al Weld Seam Based on Zn–Mg–Al Ternary Alloy

Directory of Open Access Journals (Sweden)

Liming Liu

2014-02-01

Full Text Available Based on the idea of alloying welding seams, a series of Zn–xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn–xAl filler metals, and when Zn–30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn–30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn–40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn2- and Al-based solid solution, the mechanical property of the joints was deteriorated.

Optical, structural, and nuclear scientific studies of AlGaN with high Al composition

Science.gov (United States)

Lin, Tse Yang; Chung, Yee Ling; Li, Lin; Yao, Shude; Lee, Y. C.; Feng, Zhe Chuan; Ferguson, Ian T.; Lu, Weijie

2010-08-01

AlGaN epilayers with higher Al-compositions were grown by Metalorganic Chemical Vapor Deposition (MOCVD) on (0001) sapphire. Trimethylgallium (TMGa), trimethylaluminium (TMAl) and NH3 were used as the source precursors for Ga, Al, and N, respectively. A 25 nm AlN nucleation layer was first grown at low-temperature of 590 °C at 300 Torr. Followed, AlxGa1-xN layers were grown at 1080 °C on low-temperature AlN nucleation layers. The heterostructures were characterized by a series of techniques, including x-ray diffraction (XRD), Rutherford backscattering (RBS), photoluminescence (PL), scanning electron microscopy (SEM) and Raman scattering. Precise Al compositions were determined through XRD, RBS, and SEM combined measurements. Room Temperature Raman Scattering spectra shows three major bands from AlGaN alloys, which are AlN-like, A1 longitudinal optical (LO) phonon modes, and E2 transverse optical (TO) band, respectively, plus several peak comes from the substrate. Raman spectral line shape analysis lead to an optical determination of the electrical property free carrier concentration of AlGaN. The optical properties of AlGaN with high Al composition were presented here.

Ion-beam mixing and thermal annealing of Al--Nb and Al--Ta thin films

International Nuclear Information System (INIS)

Rai, A.K.; Bhattacharya, R.S.; Mendiratta, M.G.; Subramanian, P.R.; Dimiduk, D.M.

1988-01-01

Ion-beam mixing and thermal annealing of thin, alternating layers of Al and Nb, as well as Al and Ta, were investigated by selected area diffraction and Rutherford backscattering. The individual layer thicknesses were adjusted to obtain the overall compositions as Al 3 Nb and Al 3 Ta. The films were ion mixed with 1 MeV Au + ions at a dose of 1 x 10 16 ions cm/sup -2/ . Uniform mixing and amorphization were achieved for both Al--Nb and Al--Ta systems. Equilibrium crystalline Al 3 Nb and Al 3 Ta phases were formed after annealing of ion mixed amorphous films at 400 0 C for 6 h. Unmixed films, however, remained unreacted at 400 0 C for 1 h. Partial reaction was observed in the unmixed film of Al--Nb at 400 0 C for 6 h. After annealing at 500 0 C for 1 h, a complete reaction and formation of Al 3 Nb and Al 3 Ta phases in the respective films were observed. The influence of thermodynamics on the phase formation by ion mixing and thermal annealing is discussed

Effect of elevated Al and pH on the growth and root morphology of Al-tolerant and Al-sensitive wheat seedlings in an acid soil

Directory of Open Access Journals (Sweden)

Md. Toufiq Iqbal

2014-03-01

Full Text Available Aluminium ion (Al3+ toxicity and hydrogen ion (H+ activity are the major constraints for plant growth in acid soil. This study was undertaken to determine the effect of pH and Al on the growth response and changes in root morphology of Al-tolerant (ET8 and Al-sensitive (ES8 wheat seedlings. Different levels of AlCl3 and CaCO3 were added to the soils to manipulate soil pH and extractable Al. The results showed that the bulk soil pH remained constant at pH 4.1 with further applications of AlCl3, and that the seedlings died at the 200 mg AlCl3/kg treatments. The ET8 seedlings responded better than the ES8 seedlings in both low and high Al and pH. The ET8 seedlings had higher root surface areas and root tip numbers than the ES8 seedlings in the Al treatment. In contrast, the ES8 had higher root diameters than the ET8 seedlings due to the elevated Al supply. Apoplast Al increased with the increase of soil available extractable Al, and declined with the decrease of soil extractable Al. The ET8 seedlings accumulated more Al in their apoplast than the ES8 seedlings. This study concluded that accumulation of Al in the apoplast is also involved in Al tolerance mechanism with the addition of organic acid exudation.

Information of “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” by ad-Dimashqi about the Turkic Tribes of Dasht-i Kipchak »

Directory of Open Access Journals (Sweden)

Z.S. Ilyasova

2016-12-01

Full Text Available This article introduced into academic circulation information of such a historical source as “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” (Excerpts of Time on the Marvels of the Land and Sea on Kipchak clans and Turkic tribes of Dasht-i Kipchak. The material of the study is drawn from this source. Main scientific result of this work was the source’s translation into Russian accompanied by scientific comments. Sheikh Shams al-Din Abu Abdallah Muhammad Abu Talib al-Ansari al-Sufi al-Dimashqi was the author of this work. Some scholars have mistakenly confuse him with another chronicler named Shihab al-Din Ahmad ibn Yahya Ibn Fadlallah al-Omari al-Dimashqi. There is a widespread misconception that while writing on Kipchak clans and Turkic tribes al-Dimashqi used the data of such an author as Muhammad ibn Ibrahim ibn Yahya al-Ansari al-Qutub al-Warraq al-Vatvat, also known as Ahmad al-Tini. After had studying the manuscripts of al-Tini and al-Dimashqi, we did not notice the connection between these two authors regarding their information about Kipchak clans and Turkic tribes of Dasht-i Kipchak. After had studying the information about Kipchak clans and Turkic tribes of Dasht-i Kipchak, we put forward the theory that 16 ethnonyms previously identified as Kipchak clans, are actually the etnonyms of eight Kipchak clans and eight Turkic tribes. The article also contains the extraction from “Nukhbat al-dahr fi ‘aja’ib al-barr wa-al-bahr” regarding the geography of Dasht-i Kipchak and the countries inhabited by the Turks. The following data are unique in this source: 1. The text describes such rivers as Ceyhun (Amu Darya, Seyhun (Syr Darya, Itil (Volga, as well as Khorezm and Khazar Seas (Aral and Caspian Seas. 2. Additionally, this text lists the following Turkic peoples: al-Kharlukhiya (Karluks, al-Khirgaziya (Kyrgyz, al-Kaymakiya (Kimaks, al-Guzziya (Oguz, al-Bazhanakiya (Pechenegs, al-Tuguzguziya (Uighurs, al-Khulkhiya (?, al

Studies on SiC(p) reinforced Al-Al sub 3 Ni eutectic matrix composites

International Nuclear Information System (INIS)

Masrom, A.K.; Foo, L.C.; Ismail, A.B.

1996-01-01

An investigation on processing of Al-5.69wt% Ni eutectic with SiC particulate composites is reported. The intermetallic composites are prepared by elemental powder metallurgy route and sintered at two different temperatures, i.e., 600 degree C and 620 degree C. Results show that the metal matrix was Al-Al sub 3 Ni eutectic. The phase analysis by XRD identified the presence of Al sub 3 Ni and Al as dominant phases together with silicon and Al sub 4 C sub 3 phase as minor phases. The Al sub 4 C sub 3 and Si phases are formed during sintering due to SiC-Al interface reaction. SEM micrographs also reveal the formation of microvoid surrounding the SiC particle

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

Energy Technology Data Exchange (ETDEWEB)

Markoli, B.; Spaic, S. [Ljubljana Univ. (Slovenia). Faculty of Natural Science and Engineering; Zupanic, F. [Maribor Univ. (Slovenia). Faculty of Mechanical Engineering

2001-09-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation ({alpha}{sub Al}, {beta}{sub Si}, Al{sub 3}Sm, Al{sub 2}Si{sub 2}Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L {yields} {alpha}{sub Al} + {beta}{sub Si} + Al{sub 2}Si{sub 2}Sm, and two liquidus transition reactions, i. e., L + Al{sub 3}Sm {yields} {alpha}{sub Al} + AlSiSm, and L + AlSiSm {yields} {alpha}{sub Al} + Al{sub 2}Si{sub 2}Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

Electronic Structures and Bonding Properties of Ti2AlC and Ti3AlC2

Institute of Scientific and Technical Information of China (English)

MIN Xinmin; REN Yi

2007-01-01

The relation among electronic structure, chemical bond and property of Ti2AlC, Ti3AlC2 and doping Si into Ti2AlC was studied by density function and the discrete variation (DFT-DVM) method. After adding Si into Ti2AlC, the interaction between Si and Ti is weaker than that between Al and Ti, and the strengths of ionic and covalent bonds decrease both. The ionic and covalent bonds in Ti3AlC2, especially in Ti-Al, are stronger than those in Ti2AlC. Therefore, in synthesis of Ti2AlC, the addition of Si enhances the Ti3AlC2 content instead of Ti2AlC. The density of state (DOS) shows that there is mixed conductor characteristic in Ti2AlC and Ti3AlC2. The DOS of Ti3AlC2 is much like that of Ti2AlC. Ti2SixAl1-x C has more obvious tendency to form a semiconductor than Ti2AlC, which is seen from the obvious difference of partial DOS between Si and Al3p.

Pornographie als Metapher

Directory of Open Access Journals (Sweden)

Caroline Schubarth

2010-02-01

Full Text Available In diesem Artikel werden unterschiedliche metaphorische Verwendungen des Pornografiebegriffs und deren Implikationen untersucht. Während die Existenz von Pornografie der feministischen Anti-Porno-Bewegung als Erklärung für die anhaltende Diskriminierung von Frauen in westlichen Gesellschaften dient, nutzen rechtskonservative Kräfte den Pornografievorwurf als Rechtfertigung für die Zensur von als deviant empfundenen Identitäten und sexuellen Praktiken.

Rara causa de discapacidad intelectual: síndrome de Coffin Lowry

Directory of Open Access Journals (Sweden)

Elibett Carcasés Carcasés

2015-12-01

Full Text Available El síndrome de Coffin–Lowry (CLS es una rara forma sindrómica de retardo mental, que muestra una herencia dominante ligada al X. Sus signos principales son el retardo del desarrollo psicomotor y del crecimiento, las dismorfias craneofaciales, las anomalías digitales y las alteraciones esqueléticas progresivas. Se aplicó el método clínico y la técnica comparativa o de patrón para realizar el diagnóstico del CLS en escolar femenina, blanca, de 8 años, que llegó a servicio de Genética remitida de la consulta de Ortopedia, donde era atendida por hiperlaxitud articular y escoliosis. Por su baja frecuencia esta entidad es poco conocida, por lo que resulta interesante la presentación de este caso, identificando las principales manifestaciones clínicas, que permiten un diagnóstico precoz y el manejo adecuado que incluye al paciente y su familia.

Deletion of ALS5, ALS6 or ALS7 increases adhesion of Candida albicans to human vascular endothelial and buccal epithelial cells

OpenAIRE

ZHAO, XIAOMIN; OH, SOON-HWAN; HOYER, LOIS L.

2007-01-01

C. albicans yeast forms deleted for ALS5, ALS6 or ALS7 are more adherent than a relevant control strain to human vascular endothelial cell monolayers and buccal epithelial cells. In the buccal and vaginal reconstituted human epithelium (RHE) disease models, however, mutant and control strains caused a similar degree of tissue destruction. Deletion of ALS5 or ALS6 significantly slowed growth of the mutant strain; this phenotype was not affected by addition of excess uridine to the culture medi...

Alpha and beta stabilizer character of Al in Zr-Nb-Al alloys

International Nuclear Information System (INIS)

Peruzzi Bardella, A.; Bolcich, J.C.

1987-01-01

The T β/α+β of Zr5Nb and Zr5Nb2Al (weight %) were determined in order to observe the alpha-stabilizer character of Al in ternary Zr-Nb-Al alloys. Techniques employed were change of resistivity with temperature in dynamic experiences, and metallography of samples quenched to room temperature after isothermal annealings. The T β/α+β of the ternary resulted 17 ± 8 deg C higher than that of the binary alloy. In addition, taking into account the results of previous investigations of the transformation of beta on quenching Zr-Nb-Al alloys from the beta field to room temperature, it is concluded that the beta-stabilizer character of Nb is stronger than the alpha-stabilizer character of Al in these Zr alloys, and that the Al can have important influence on the mechanical properties by the appearance of TRIP effect. (Author) [es

Insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor devices with Al2O3 or AlTiO gate dielectrics

Science.gov (United States)

Le, Son Phuong; Nguyen, Duong Dai; Suzuki, Toshi-kazu

2018-01-01

We have investigated insulator-semiconductor interface fixed charges in AlGaN/GaN metal-insulator-semiconductor (MIS) devices with Al2O3 or AlTiO (an alloy of Al2O3 and TiO2) gate dielectrics obtained by atomic layer deposition on AlGaN. Analyzing insulator-thickness dependences of threshold voltages for the MIS devices, we evaluated positive interface fixed charges, whose density at the AlTiO/AlGaN interface is significantly lower than that at the Al2O3/AlGaN interface. This and a higher dielectric constant of AlTiO lead to rather shallower threshold voltages for the AlTiO gate dielectric than for Al2O3. The lower interface fixed charge density also leads to the fact that the two-dimensional electron concentration is a decreasing function of the insulator thickness for AlTiO, whereas being an increasing function for Al2O3. Moreover, we discuss the relationship between the interface fixed charges and interface states. From the conductance method, it is shown that the interface state densities are very similar at the Al2O3/AlGaN and AlTiO/AlGaN interfaces. Therefore, we consider that the lower AlTiO/AlGaN interface fixed charge density is not owing to electrons trapped at deep interface states compensating the positive fixed charges and can be attributed to a lower density of oxygen-related interface donors.

Effects of Al(III and Nano-Al13 Species on Malate Dehydrogenase Activity

Directory of Open Access Journals (Sweden)

Rong Fu Chen

2011-05-01

Full Text Available The effects of different aluminum species on malate dehydrogenase (MDH activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT modified glass carbon electrode (GCE. The results showed that Al(III and Al13 can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III and Al13 concentration increase. Our study also found that the effects of Al(III and Al13 on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

Effects of Al(III) and nano-Al13 species on malate dehydrogenase activity.

Science.gov (United States)

Yang, Xiaodi; Cai, Ling; Peng, Yu; Li, Huihui; Chen, Rong Fu; Shen, Ren Fang

2011-01-01

The effects of different aluminum species on malate dehydrogenase (MDH) activity were investigated by monitoring amperometric i-t curves for the oxidation of NADH at low overpotential using a functionalized multi-wall nanotube (MWNT) modified glass carbon electrode (GCE). The results showed that Al(III) and Al(13) can activate the enzymatic activity of MDH, and the activation reaches maximum levels as the Al(III) and Al(13) concentration increase. Our study also found that the effects of Al(III) and Al(13) on the activity of MDH depended on the pH value and aluminum speciation. Electrochemical and circular dichroism spectra methods were applied to study the effects of nano-sized aluminum compounds on biomolecules.

Fracture toughness of Ti-Al3Ti-Al-Al3Ti laminate composites under static and cyclic loading conditions

Science.gov (United States)

Patselov, A. M.; Gladkovskii, S. V.; Lavrikov, R. D.; Kamantsev, I. S.

2015-10-01

The static and cyclic fracture toughnesses of a Ti-Al3Ti-Al-Al3Ti laminate composite material containing at most 15 vol % intermetallic compound are studied. Composite specimens are prepared by terminating reaction sintering of titanium and aluminum foils under pressure. The fracture of the titanium layers is quasi-cleavage during cyclic crack growth and is ductile during subsequent static loading.

Data supporting Al-Abed et al., Environ. Sci.: Nano, 2016,

Data.gov (United States)

U.S. Environmental Protection Agency — Data files representing each of the Figures and Tables published in Al-Abed et al., Environ. Sci.: Nano, 2016, 3, 593. The data file names identify the Figure or...

Ti, Al

Indian Academy of Sciences (India)

In the present study, authors report on the effect that substrate bias voltage has on the microstructure and mechanical properties of (Ti, Al)N hard coatings deposited with cathodic arc evaporation (CAE) technique. The coatings were deposited from a Ti0.5Al0.5 powder metallurgical target in a reactive nitrogen atmosphere at ...

Growth of CdTe: Al films; Crecimiento de peliculas de CdTe: Al

Energy Technology Data Exchange (ETDEWEB)

Gonzalez A, M.; Zapata T, M. [CICATA-IPN, 89600 Altamira, Tamaulipas (Mexico); Melendez L, M. [CINVESTAV-IPN, A.P. 14-740, 07000 Mexico D.F. (Mexico); Pena, J.L. [CINVESTAV-IPN, A.P. 73 Cordemex, 97310 Merida, Yucatan (Mexico)

2006-07-01

CdTe: AI films were grown by the close space vapor transport technique combined with free evaporation (CSVT-FE). The Aluminum (Al) evaporation was made by two kinds of sources: one made of graphite and the other of tantalum. The films were deposited on glass substrates. The Al source temperature was varied maintaining the CdTe source temperature fixed as well as the substrate temperature. The films were characterized by x-ray energy dispersive analysis (EDAX), x-ray diffraction and optical transmission. The results showed for the films grown with the graphite source for Al evaporation, the Al did not incorporate in the CdTe matrix, at least to the level of EDAX sensitivity; they maintained the same crystal structure and band gap. For the samples grown with the tantalum source, we were able to incorporate the Al. The x-ray diffraction patterns show that the films have a crystal structure that depends on Al concentration. They were cubic up to 2.16 at. % Al concentration; for 19.65 at. % we found a mixed phase; for Al concentration higher than 21 at. % the films were amorphous. For samples with cubic structure it was found that the lattice parameter decreases and the band gap increases with Al concentration. (Author)

First-principles study of L10 Ti-Al and V-Al alloys

International Nuclear Information System (INIS)

Chubb, S.R.; Papaconstantopoulos, D.A.; Klein, B.M.

1988-01-01

As a first step towards understanding the reduced embrittlement of L1 0 Ti-Al alloys which accompanies the introduction of small concentrations of V, we have determined from first principles, using full-potential linearized--augmented-plane-wave calculations, the equilibrium values of the structural parameters and the associated electronic structure for the stoichiometric (L1 0 ) Ti-Al (tetragonal) compound. Our calculated values of c/a and a are in good agreement with experiment. Using the same method of calculation, we have also studied the electronic structure associated with the (hypothetical) L1 0 V-Al alloy that would form when V is substituted for Ti. We find that (1) the electronic structures of these V-Al alloys are relatively insensitive to variations of c/a and a; (2) near the Ti-Al equilibrium geometry, the electronic structures of the V-Al and Ti-Al alloys are very similar; and (3) that a rigid-band model involving substitution of V for Ti can be used to gain a qualitative understanding of the reduction in c/a which accompanies the introduction of small concentrations of V. We relate the reduction in c/a to important changes in the bonding that accompany the occupation of bands immediately above the Fermi level of the stoichiometric Ti-Al compound

Kinetic studies of oxidation of MgAlON and a comparison of the oxidation behaviour of AlON, MgAlON, O'SiAlON-ZrO{sub 2}, and BN-ZCM ceramics

Energy Technology Data Exchange (ETDEWEB)

Wang Xidong; Seetharaman, S. [Div. of Metallurgy, Royal Inst. of Tech., Stockholm (Sweden); Li Wenchao [Dept. of Physical Chemistry, Univ. of Science and Technology Beijing (USTB), Beijing, BJ (China)

2002-06-01

The kinetics and morphology of the oxidation process of magnesium-aluminium oxynitride (MgAlON), aluminium oxynitride (AlON), O'SiAlON-ZrO{sub 2}, and BN-ZCM have been studied in the temperature range 1373-1773 K (ZCM=30 wt% ZrO{sub 2}, 52 wt% Al{sub 2}O{sub 3} and 18 wt% 3 Al{sub 2}O{sub 3}.2 SiO{sub 2}). Oxidation experiments with powder and plate samples of the above materials have been carried out in air. MgAlON shows the best resistance to oxidation at lower temperatures (< 1473 K), whereas at higher temperatures ({proportional_to} 773 K), AlON shows the best resistance. O'SiAlON-ZrO{sub 2} shows very good oxidation resistance up to 1673 K. But its oxidation rate increases strongly above 1673 K, presumably due to the formation of liquid phase. BN-ZCM has the poorest oxidation resistance due to the evaporation of B{sub 2}O{sub 3}. The activation energies for the chemical oxidation reaction of AlON, MgAlON, and O'SiAlON-ZrO{sub 2} are 214, 330 and 260 kJ/mol, respectively. The overall diffusion activation energies for AlON, MgAlON, O'SiAlON-ZrO{sub 2} and BN-ZCM are 227, 573, 367 and 289 kJ/mol, respectively. (orig.)

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

International Nuclear Information System (INIS)

Qin, Gaowu W.; Ren Yuping; Huang Wei; Li Song; Pei Wenli

2010-01-01

Graphical abstract: Display Omitted Research highlights: The ε-AlMn phase acts as the heterogeneous nucleus of α-Mg phase during the solidification of the AZ31 Mg alloy, not the γ-Al 8 Mn 5 phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure ε-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 o C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure ε-AlMn, γ 2 -Al 8 Mn 5 or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the ε-AlMn phase in the Mn-Al alloys, not the γ 2 -Al 8 Mn 5 phase. The grain size of AZ31 Mg alloy is about 91 μm without any addition of Mn-Al alloys, but remarkably decreases to ∼55 μm with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to ∼53 μm, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 o C.

Ibn Qutayba en al-Andalus. La préface à I 'Adab al-Kātib dans le commentaire d'Ibn al-Sīd al-Baṭalyawsī

Directory of Open Access Journals (Sweden)

Soravia, Bruna

2004-12-01

Full Text Available Ibn Qutayba's preface to his Adab al-kātib has been considered for centuries the most important section of this work and it has been the object of many commentaries, both in the Muslim East and West. This paper deals with Ibn al-Sīd al-Baṭalyawsī´s commentary al-Iqtiḍāb, trying to show the peculiar way in which Ibn al-Sīd develops his own critique of Ibn Qutayba's controversial thesis on the relation between orthodoxy, falsafa and kalām. At the same time, the Andalusi author works out his own conception of adab, deeply influenced by his biographical experience. Finally a full translation of Ibn Qutayba's preface is proposed, half a century after G. Lecomte's partial one.

El prefacio de Ibn Qutayba a su Adab al-Kātib ha sido considerado durante siglos como el fragmento más importante de su obra, y ha sido objeto de muchos comentarios, tanto orientales como occidentales. Este artículo trata del comentario que Ibn al-Sīd al-Baṭalyawsī hizo de ese texto de Ibn Qutayba, e intenta mostrar la forma peculiar en que Ibn al-Sīd desarrolla su propia crítica a la polémica tesis de Ibn Qutayba sobre la relación entre ortodoxia, falsafa y kalām. Al mismo tiempo, el autor andalusí elabora su propia concepción del adab, profundamente influida por su experiencia biográfica. Para concluir, se presenta una traducción completa del prefacio de Ibn Qutayba, medio siglo después de la parcial realizada por G. Lecomte.

Interview als Text vs. Interview als Interaktion

Directory of Open Access Journals (Sweden)

Arnulf Deppermann

2013-09-01

Full Text Available Das Interview ist nach wie vor das beliebteste sozialwissenschaftliche Verfahren des Datengewinns. Ökonomie der Erhebung, Vergleichbarkeit und die Möglichkeit, Einsicht in Praxisbereiche und historisch-biografische Dimensionen zu erhalten, die der direkten Beobachtung kaum zugänglich sind, machen seine Attraktivität aus. Zugleich mehren sich Kritiken, die seine Leistungsfähigkeit problematisieren, indem sie auf die begrenzte Reichweite der Explikationsfähigkeiten der Befragten, die Reaktivität der Erhebung oder die Differenz zwischen Handeln und dem Bericht über Handeln verweisen. Im Beitrag wird zwischen Ansätzen, die das Interview als Text, und solchen, die es als Interaktion verstehen, unterschieden. Nach dem Text-Verständnis werden Interviews unter inhaltlichen Gesichtspunkten analysiert und als Zugang zu einer vorgängigen sozialen oder psychischen Wirklichkeit angesehen. Das Interaktions-Verständnis versteht Interviews dagegen als situierte Praxis, in welcher im Hier und Jetzt von InterviewerInnen und Befragten gemeinsam soziale Sinnstrukturen hergestellt werden. Anhand ubiquitärer Phänomene der Interviewinteraktion – Fragen, Antworten und die Selbstpositionierung von InterviewerInnen und Befragten – werden Praktiken des interaktiv-performativen Handelns im Interview dargestellt. Ihre Relevanz für die Interviewkonstitution und ihre Erkenntnispotenziale für die Interviewauswertung werden aufgezeigt. Es wird dafür plädiert, die interaktive Konstitutionsweise von Interviews empirisch zu erforschen und methodisch konsequent zu berücksichtigen. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1303131

Structure and phase composition of Al-Ce-Cu system alloys in range of quasi-binary Al-Al8CeCu4 section

International Nuclear Information System (INIS)

Belov, N.A.; Khvan, A.V.

2007-01-01

The phase diagram of the Al-Cu-Ce system in the quasibinary section area of Al-Al 8 CeCu 4 has been investigated by metallographic, thermal, micro-X-ray spectral and X-ray structural analyses. The parameters of the eutectic reaction L→(Al)+CeCu 4 Al 8 : T=610 Deg C were found out; the composition was 14% Cu and 7% Ce. This eutectics is of a disperse structure and the ternary compound contained is capable of fragmentation and spheroidizing in the heating process (starting from 540 Deg C). It was demonstrated that the area of optimal (Al)+CeCu 4 Al 8 eutectics-based alloy compositions was within the narrow limits. That is related to the fact that at a comparatively little variation of the Cu:Ce=2 ratio solidus sharply decreases and, as a result, the crystallization interval considerably extends [ru

Structural and electrical characterization of AuPtAlTi ohmic contacts to AlGaN/GaN with varying annealing temperature and Al content

OpenAIRE

Fay, Mike W.; Han, Y.; Brown, Paul D.; Harrison, Ian; Hilton, K.P.; Munday, A.; Wallis, D.; Balmer, R.S.; Uren, M.J.; Martin, T.

2008-01-01

The effect of varying annealing temperature and Al layer thickness on the structural and electrical characteristics of AuPtAlTi/AlGaN/GaN ohmic contact structures has been systematically investigated. The relationship between annealing temperature, Al content, interfacial microstructure, surface planarity and contact resistance is\\ud examined. In particular, the presence of a detrimental low temperature Pt-Al reaction is identified. This is implicated in both the requirement for a higher Al:T...

Grain refining mechanism of Al-containing Mg alloys with the addition of Mn-Al alloys

Energy Technology Data Exchange (ETDEWEB)

Qin, Gaowu W., E-mail: qingw@smm.neu.edu.c [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China); Ren Yuping; Huang Wei; Li Song; Pei Wenli [Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), Northeastern University, Wenhu Road 3-11, Heping District, Shenyang 110004, Liaoning Province (China)

2010-10-08

Graphical abstract: Display Omitted Research highlights: The {epsilon}-AlMn phase acts as the heterogeneous nucleus of {alpha}-Mg phase during the solidification of the AZ31 Mg alloy, not the {gamma}-Al{sub 8}Mn{sub 5} phase. The grain refinement effect is very clear with the addition of only 0.5 wt% Mn-28Al alloy (pure {epsilon}-AlMn). The grain refinement does not deteriorate up to the holding time of 60 min at 740 {sup o}C. - Abstract: The effect of manganese on grain refinement of Al-containing AZ31 Mg alloy has been investigated by designing a series of Mn-Al alloys composed of either pure {epsilon}-AlMn, {gamma}{sub 2}-Al{sub 8}Mn{sub 5} or both of them using optical microscopy and X-ray diffraction. It is experimentally clarified that the grain refinement of the AZ31 Mg alloy is due to the existence of the {epsilon}-AlMn phase in the Mn-Al alloys, not the {gamma}{sub 2}-Al{sub 8}Mn{sub 5} phase. The grain size of AZ31 Mg alloy is about 91 {mu}m without any addition of Mn-Al alloys, but remarkably decreases to {approx}55 {mu}m with the addition of either Mn-34 wt% Al or Mn-28 wt% Al. With a minor addition of 0.5 wt% Mn-28Al alloy, the grain size of AZ31 alloy decreases to {approx}53 {mu}m, and the Mn-28Al alloy can be active as grain refiner for holding time up to 60 min for the melt AZ31 alloy at 750 {sup o}C.

AYAT-AYAT WAH}DAT AL-WUJUd dalam Kitab Tanbi>h al-Ma>shi Karya ‘Abdurrauf al-Sinkili

Directory of Open Access Journals (Sweden)

Asep Nahrul Musadad

2015-08-01

Full Text Available Abstract: One of the key moments in discussing the history of Indonesian Islam is a polemic related to the negotiation on the doctrine of wahdat al-wujud that occured in Aceh in 17th century between the followers of Hamzah al-Fansuri and Nuruddin al-Raniri. This article focuses on analyzing several Qur’anic verses used by ‘Abdurrauf as the confirmation of his argument. In the polemical context, Abdurrauf al-Sinkili appeared to be an actor of reconciliation between two opposite sides. He tried to respond to the disputed issues through his book called “Tanbi>h al-Mashi”. As an exponent of the so-called moderate sufism (mysticism, he built the argument concerning wah}dat al-wujud based on the Quranic text. After making a thematic classification chronologically, his interpretation on these verses is analyzed by using Hussain al-Dhahaby’s theory of sufistic exegesis. In conclusion, it shows that ‘Abdurrauf’s commentary is “sufi-nazari type”, featured by his exegeses pattern. This, of course, represents his attitude as a reconciler who then needs to seek confirmation to the Qur’anic verses in evaluating wah}dat al-wujud doctrine, through which such a polemical issues occurred at that time. الملخص: إن من المرحلة الأساسية التي مرّ بها تاريخ الإسلام في اندونيسيا الجدل و النزاع حول عقيدة وحدة الوجود فى أتشيه (Aceh حول قرن السابع عشر بين أتباع حمزة الفنسوري و نور الدين الرانيري. ففي ذلك الخطاب النزاعي جاء عبد الرؤوف السنكيلي مصلحا بين الجانبين المعاكسين. وعلى مقتضى الظروف، كتب كتاب " تنبيه الماشي" الذي تطرّق فيه طريق التوسّط، ممثّلا للتصوّف المعتدل. اعتمد عبد الرؤوف على النصوص القرآنية فى تحقيق آراءه حول ت

Reviewing Medical Education in KamelAl-Senaat Al-Tebieh

Directory of Open Access Journals (Sweden)

Shahla Moradi

2017-06-01

Full Text Available Background and Objective: Among the human sciences, medicine is superior to all other sciences. One of the effective factors in education, especially in medical education is using appropriate textbooks. This study aims to consider a classic book of medical education and find its relevance to modern medicine. Materials and Methods: Reviewing and analyzing parts of Kamel Al-Senaat Al-Tebieh medical textbook. Results: This book has about four hundred thousand words and it was divided into twenty articles, each consisting of several chapters, first ten topics of which are about theoretical medicine, and others are information related to practical medicine. Conclusion: One of the most important obligations of every nation is to protect and preserve written and unwritten cultural and scientific resources Kamel Al-Senaat Al-Tebieh was written in one of the glorious periods of Iranian Medical History by Ali Ibn Abbas. It has a dignified position because of its recording method. This method is one of the best methods that is used after Ahvazi. Even today it is a valuable source of medical education.

Density and atomic volume in liquid Al-Fe and Al-Ni binary alloys

Energy Technology Data Exchange (ETDEWEB)

Plevachuk, Yu. [Ivan Franko National Univ., Lviv (Ukraine). Dept. of Metal Physics; Egry, I.; Brillo, J.; Holland-Moritz, D. [Deutsches Zentrum fuer Luft- und Raumfahrt, Koeln (Germany). Inst. fuer Raumsimulation; Kaban, I. [Chemnitz Univ. of Technolgy (Germany). Inst. of Physics

2007-02-15

The density of liquid Al-Fe and Al-Ni binary alloys have been determined over a wide temperature range by a noncontact technique combining electromagnetic levitation and optical dilatometry. The temperature and composition dependences of the density are analysed. A negative excess volume correlates with the negative enthalpy of mixing, compound forming ability and chemical short-range ordering in liquid Al-Fe and Al-Ni alloys. (orig.)

TEM characterization of Al-C-Cu-Al2O3 composites produced by mechanical milling

International Nuclear Information System (INIS)

Santos-Beltran, A.; Gallegos-Orozco, V.; Estrada-Guel, I.; Bejar-Gomez, L.; Espinosa-Magana, F.; Miki-Yoshida, M.; Martinez-Sanchez, R.

2007-01-01

Novel Al-based composites (Al-C-Cu-Al 2 O 3 ) obtained by mechanical milling (MM), were characterized by transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). Analyses of composites were carried out in both, the as-milled and the as-sintered conditions. C nanoparticles were found in the as-milled condition and Al 2 O 3 nanofibers were found in as-sintered products, as determined by EELS. C and Cu react with Al to crystallize in Al 3 C 4 and Al 2 Cu structures, respectively

Formation of AlFeSi phase in AlSi12 alloy with Ce addition

Directory of Open Access Journals (Sweden)

S. Kores

2012-04-01

Full Text Available The influence of cerium addition on the solidification sequence and microstructure constituents of the Al-Si alloys with 12,6 mass % Si was examined. The solidification was analyzed by a simple thermal analysis. The microstructures were examined with conventional light and scanning electron microscopy. Ternary AlSiCe phase was formed in the Al-Si alloys with added cerium during the solidification process. AlSiCe and β-AlFeSi phases solidified together in the region that solidified the last. Cerium addition influenced on the morphology of the α-AlFeSi phase solidification.

La Peroxidación lipídica en la enfermedad periodontal inflamatoria experimental

Directory of Open Access Journals (Sweden)

Bárbara E García Triana

1998-04-01

Full Text Available La peroxidación de los lípidos de las membranas de los tejidos periodontales, parece estar implicada en la etiopatogenia de la enfermedad periodontal inflamatoria. En este estudio utilizamos perros Beagles, a los cuales se les provocó la enfermedad, por ligadura de los dientes de una hemiarcada, mientras la hemiarcada opuesta se empleó como control. Al final del experimento, las variables estudiadas (profundidad del surco gingival, altura ósea y niveles de malonil-dialdehído fueron significativamente superiores en la hemiarcada ligada, con respecto a la no ligada. Concluimos que el uso de este modelo es factible en nuestras condiciones. Estos resultados apoyan la teoría de la participación de la peroxidación lipídica en la etiopatogenia de la enfermedad periodontal inflamatoria.The lipid peroxidation of the periodontal membranes seems to be involved in the pathogenesis of the periodontal disease. We used for this study Beagles dogs which were caused such a disease by applying a ligature to a dental hemiarch teeth whereas the opposite hemiarch was used as a control. At the end of the experiment, the studied variables (gingival sulcus depth, bone height and malonyl-dialdehyde levels were significantly higher in the ligated hemiarch. We concluded that the use of this model is feasible in our conditions. These results back up the theory of the role of lipid peroxidation in the pathogenesis of the periodontal diseases.

Compressive performance and crack propagation in Al alloy/Ti{sub 2}AlC composites

Energy Technology Data Exchange (ETDEWEB)

Hanaor, D.A.H., E-mail: dorian.hanaor@sydney.edu.au [School of Civil Engineering, University of Sydney, Sydney, NSW 2006 (Australia); Hu, L. [Ames Laboratory, U.S. Department of Energy, Ames, Iowa 50011 (United States); Kan, W.H.; Proust, G. [School of Civil Engineering, University of Sydney, Sydney, NSW 2006 (Australia); Foley, M. [Australian Centre for Microscopy and Microanalysis, University of Sydney, Sydney, NSW 2006 (Australia); Karaman, I.; Radovic, M. [Department of Materials Science and Engineering, Texas A& M University, College Station, TX 77843 (United States)

2016-08-30

Composite materials comprising a porous Ti{sub 2}AlC matrix and Al 6061 alloy were fabricated by a current-activated pressure assisted melt infiltration process. Coarse, medium and fine meso-structures were prepared with Al alloy filled pores of differing sizes. Materials were subjected to uniaxial compressive loading up to stresses of 668 MPa, leading to the failure of specimens through crack propagation in both phases. As-fabricated and post-failure specimens were analysed by X-ray microscopy and electron microscopy. Quasi-static mechanical testing results revealed that compressive strength was the highest in the fine structured composite materials. While the coarse structured specimens exhibited a compressive strength of 80% relative to this. Reconstructed micro-scale X-ray tomography data revealed different crack propagation mechanisms. Large planar shear cracks propagated throughout the fine structured materials while the coarser specimens exhibited networks of branching cracks propagating preferentially along Al alloy-Ti{sub 2}AlC phase interfaces and through shrinkage pores in the Al alloy phase. Results suggest that control of porosity, compensation for Al alloy shrinkage and enhancement of the Al alloy-Ti{sub 2}AlC phase interfaces are key considerations in the design of high performance metal/Ti{sub 2}AlC phase composites.

Phase equilibria and crystalline structure of compounds in the Lu-Al and Lu-Cu-Al systems

International Nuclear Information System (INIS)

Kuz'ma, Yu.B.; Stel'makhovich, B.M.; Galamushka, L.I.

1992-01-01

Phase equilibria and crystal structure of compounds in Lu-Al and Lu-Cu-Al systems were studied. Existence of Lu 2 Al compound having the structure of the PbCl 2 type is ascertained. Diagram of phase equilibria of Lu-Cu-Al system at 870 K is plotted. Compounds Lu 2 (Cu,Al) 17 (the Th 2 Zn 17 type structure), Lu(Cu,Al) 5 (CaCu 5 type structure), Lu 6 (Cu,Al) 23 (Th 6 Mn 23 type structure) and ∼ LuCuAl 2 have been prepared for the first time. Investigation of component interaction in Lu-Cu-Al system shows that the system is similar to previously studied systems Dy-Cu-Al and Er-Cu-Al. The main difference consists in the absence of LuCuAl 3 compound with rhombic structure of the CeNi 2+x Sb 2-x type in the system investigated

Al Qaeda in the Arabian Peninsula (AQAP): An Al Qaeda Affiliate Case Study

Science.gov (United States)

2017-10-01

Villarosa, Al-Qaeda in Yemen, Carnegie Endowment, July 7, 2009, http://carnegieendowment.org/2009/07/07/Al-Qaeda-in-yemen- event-1372. 53 Brian Whitaker...73 Khaled Fattah, “Yemen’s Insecurity Dilemma,” Yemen Times, February 11, 2014, http:// carnegie -mec.org/2014/02...Johnsen, and Shari Villarosa, “Al-Qaeda in Yemen.” Carnegie Endowment. July 7, 2009. http://carnegieendowment.org/2009/07/07/Al-Qaeda-in- yemen-event

Formation of epitaxial Al 2O 3/NiAl(1 1 0) films: aluminium deposition

Science.gov (United States)

Lykhach, Y.; Moroz, V.; Yoshitake, M.

2005-02-01

Structure of epitaxial Al 2O 3 layers formed on NiAl(1 1 0) substrates has been studied by means of reflection high-energy electron diffraction (RHEED). The elucidated structure was compared to the model suggested for 0.5 nm-thick Al 2O 3 layers [K. Müller, H. Lindner, D.M. Zehner, G. Ownby, Verh. Dtsch. Phys. Ges. 25 (1990) 1130; R.M. Jaeger, H. Kuhlenbeck, H.J. Freund, Surf. Sci. 259 (1991) 235]. The stepwise growth of Al 2O 3 film, involving deposition and subsequent oxidation of aluminium onto epitaxial 0.5 nm-thick Al 2O 3 layers, has been investigated. Aluminium was deposited at room temperature, whereas its oxidation took place during annealing at 1070 K. The Al 2O 3 thickness was monitored by means of Auger electron spectroscopy (AES). It was found that Al 2O 3 layer follows the structure of 0.5 nm thick Al 2O 3 film, although a tilting of Al 2O 3(1 1 1) surface plane with respect to NiAl(1 1 0) surface appeared after Al deposition.

Amyotrophic lateral sclerosis (ALS)

Science.gov (United States)

Lou Gehrig disease; ALS; Upper and lower motor neuron disease; Motor neuron disease ... One out of 10 cases of ALS is due to a genetic defect. The cause is unknown in most other cases. In ALS, motor nerve cells (neurons) waste away ...

Pemikiran Politik al-Shawkânî dalam Fath al-Qadîr

Directory of Open Access Journals (Sweden)

Yusuf Hanafi

2015-09-01

Full Text Available Muhammad b. ‘Alî Muhammad b. ‘Abd Allâh al-Shawkânî al-San‘ânî. He was born in the Hijrah in Shawkân village, Yemen on Monday 28 Dhû al-Qa‘dah 1172 H and died on Tuesday, 27 Jumâd al-Akhîr 1250 H at the age about 78 years. Al-Shawkânî grew up in the San‘a city, it is the capital of the republic of Yemen now. He study first time about religion from his father, then from renowed scholars in San‘a and its surrounding, he was known as a scolar who mastered the various branches of religious sciences. Such as tafsîr, h}adîth, fiqh, us}ûl al-fiqh, history, science of kalâm, philosophy, balâghah, mant}iq etc. the main issue in this article is how political thought in the book of tafsir Fath al-Qadîr is the work of Shawkânî. At the end of article, the authors found that the intended political thinking in the study of Fath al-Qadîr is about constitutional ideas. These ideas about the constitution is limited to the concept of leadership and deliberation, the concept of the right of citizen to obtain justice, and the concept pf the right of citizens to live association and assembly

Oxidation behavior of Al/Cr coating on Ti2AlNb alloy at 900 °C

Science.gov (United States)

Yang, Zhengang; Liang, Wenping; Miao, Qiang; Chen, Bowen; Ding, Zheng; Roy, Nipon

2018-04-01

In this paper, the Al/Cr coating was fabricated on the surface of Ti2AlNb alloy via rf magnetron sputtering and double glow treatment to enhance oxidation resistance. The protective coating with an outer layer of Al and inner layer of Cr has great bonding strength due to the in-diffusion of Cr and the inter-diffusion between Al and Cr to form Al-Cr alloyed layer which has great hardness. Acoustic emission curve which was detected via WS-2005 scratch tester indicates the bonding strength between Al/Cr coating and substrate is great. Morphology of Ti2AlNb alloy with Al/Cr coating after scratch test shows that the scratch is smooth without disbanding, and the depth and breadth of scratch are changed uniformly. The mass change was reduced after oxidation test due to the Al/Cr protective coating. Isothermal oxidation test at 900 °C was researched. Results indicate that Al/Cr coating provided oxidation resistance of Ti2AlNb alloy with prolonged air exposure at 900 °C. Al2O3 was detected by XRD patterns and SEM images, and was formed on the surface of Ti2AlNb alloy to protect substrate during oxidation test. A certain content of Cr is beneficial for the formation of Al2O3. Besides, Cr2O3 was produced under Al2O3 by outward diffusion of Cr to protect substrate sequentially, no cracks were discovered on Al/Cr protective coating. The process of Ti outward diffusion into surface was suppressive due to integration of Cr-Ti and Al-Ti intermetallics. A steady, adherent and continuous coated layer of Al/Cr on Ti2AlNb alloy increases oxidation resistance.

¿COLOMBIA DEBE APOSTARLE AL SOFTWARE LIBRE, AL DE FUENTE ABIERTA O AL PROPIETARIO?

Directory of Open Access Journals (Sweden)

Luis Alberto Girón Murillo

2014-06-01

Full Text Available Es complejo para gestores y administradores conocer las implicaciones que la adopción de modelos de desarrollo de software tendría para una región. Este artículo ofrece una evaluación de las implicaciones dinámicas que para el desarrollo de software de una región tendría el apostar de forma excluyente al software libre, al software de fuente abierta y al software propietario. Se desarrolló un modelo de simulación en Vensim de la dinámica de sistemas en donde se evaluaron 3 escenarios: uno en donde se adopta de forma excluyente el software libre, uno en donde se adopta el software propietario y uno en donde se adopta el software de fuente abierta. Se ofrecen descripciones y explicaciones de los resultados que sugieren las potencialidades de cada uno de los modelos de desarrollo evaluados.

Investigation of annealing treatment on the interfacial properties of explosive-welded Al/Cu/Al multilayer

International Nuclear Information System (INIS)

Honarpisheh, M.; Asemabadi, M.; Sedighi, M.

2012-01-01

Highlights: ► We studied explosive-welded Al/Cu/Al multilayer. ► We investigated heat treatment influence on the bond properties of Al/Cu/Al. ► Intermetallic compounds were studied using the SEM, OM and EDS analysis. ► Variations of hardness in the thickness were investigated using micro-hardness. ► Intermetallic phases such as AlCu 3 and Al 2 C create at the interface of Al/Cu/Al. -- Abstract: In this study, an Al/Cu/Al multilayer sheet was fabricated by explosive welding process and the effects of annealing temperature on the interfacial properties of explosively bonded Al/Cu bimetal have been investigated. For this purpose, hardness changes along the thickness of the samples have been measured, and the thickness and type of intermetallic compounds formed at the joining interface have been explored by means of optical microscopy (OM), scanning electron microscopy (SEM) and also energy dispersive spectroscopy (EDS). The obtained results indicate that, with the increase of the annealing temperature, the thickness of intermetallic compounds has increased and the amount of hardness along the thickness of the joining interface has diminished. In the annealed sample at 400 °C for 30 min, it was observed that intermetallic layers have formed at the interface of Al/Cu bimetals. These layers consist of the intermetallic compounds AlCu 3 , Al 2 Cu and AlCu, and their thickness gets to about 5 μm at some points. The examinations performed by the SEM, following the Vickers micro-hardness test, indicated the existence of a number of microcracks at the top and bottom interface of the sample annealed at 400 °C. This shows the formation of brittle intermetallic compounds at the joining interface, and also indicates the low ductility of these compounds.

NMR evidence for Co-Al-Co molecular groups trapped in cages of Co4Al13

International Nuclear Information System (INIS)

Jeglic, P.; Heggen, M.; Feuerbacher, M.; Bauer, B.; Gille, P.; Haarmann, F.

2009-01-01

We present the results of 27 Al nuclear magnetic resonance (NMR) experiments on the phase Co 4 Al 13 . These results are compared to a recent structure model [1], which demonstrates a unique bonding for Al atoms in the Co-Al-Co molecular groups. In our measurement, two 27 Al signals were identified. The first one originates from Al atoms forming cages. The second signal corresponds to Al sites with exceptionally large almost axially symmetric quadrupole coupling. This finding is in perfect agreement with isolated Co-Al-Co molecular groups in accordance to Ref. [1].

The Y-Cu-Al system

International Nuclear Information System (INIS)

Krachan, T.; Stel'makhovych, B.; Kuz'ma, Yu.

2003-01-01

The phase diagram of the Y-Cu-Al system at 820 K has been constructed using X-ray powder diffraction. The existence of earlier known ternary aluminides has been confirmed and their homogeneity regions and atomic distributions in the structures have been determined: YCu 4.6-4.0 Al 7.4-8.0 (ThMn 12 -type R I =0.049), Y 2 Cu 12.0-10.5 Al 5.0-6.5 (Th 2 Zn 17 -type R I =0.092), YCu 1.0-1.1 Al 1.0-0.9 (Fe 2 P-type R I =0.068). It has been shown that the structure of Y(Cu,Al) 3 is characterized by an ordered distribution of the Cu and Al atoms and it should be referred as Ca 3 Cu 2 Al 7 structure type (R I =0.060) besides the PuNi 3 structure type with statistical occupancies of the smaller atoms. At the investigated temperature the compound YCu 1.0-0.25 Al 3.0-3.75 (BaAl 4 -type) was not observed. However, we found the ternary aluminide with composition Y 3 Cu 2.7-2.0 Al 8.3-9.0 and related La 3 Al 11 -type (space group Immm, a=0.4192-0.4228, b=1.2423-1.2557, c=0.9812-0.9895 nm, R I =0.069). The compounds YCu 6.8 Al 4.2 (space group Fddd, Tb(Cu 0.58 Al 0.42 ) 11 -type, a=1.42755, b=1.48587, c=0.65654 nm, R I =0.062) and YCu 6.5 Al 4.5 (space group I4 1 /amd, BaCd 11 -type, a=1.02774, c=0.65838 nm, R I =0.071) have been found and structurally refined for the first time

Preparation, deformation, and failure of functional Al-Sn and Al-Sn-Pb nanocrystalline alloys

Science.gov (United States)

Noskova, N. I.; Vil'Danova, N. F.; Filippov, Yu. I.; Churbaev, R. V.; Pereturina, I. A.; Korshunov, L. G.; Korznikov, A. V.

2006-12-01

Changes in the structure, hardness, mechanical properties, and friction coefficient of Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb (wt %) alloys subjected to severe plastic deformation by equal-channel angular pressing (with a force of 40 tonne) and by shear at a pressure of 5 GPa have been studied. The transition into the nanocrystalline state was shown to occur at different degrees of plastic deformation. The hardness exhibits nonmonotonic variations, namely, first it increases and subsequently decreases. The friction coefficient of the Al-30% Sn, Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys quenched from the melt was found to be 0.33; the friction coefficients of these alloys in the submicrocrystalline state (after equal-channel angular pressing) equal 0.24, 0.32, and 0.35, respectively. The effect of disintegration into nano-sized powders was found to occur in the Al-15% Sn-25% Pb, and Al-5% Sn-35% Pb alloys after severe plastic deformation to ɛ = 6.4 and subsequent short-time holding.

Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet

International Nuclear Information System (INIS)

Cao, J.; Song, X.G.; Wu, L.Z.; Qi, J.L.; Feng, J.C.

2012-01-01

The Al/Ni multilayers were characterized and diffusion bonding of TiAl intermetallics to TiC cermets was carried out using the multilayers. The microstructure of Al/Ni multilayers and TiAl/TiC cermet joint was investigated. The layered structures consisting of a Ni 3 (AlTi) layer, a Ni 2 AlTi layer, a (Ni,Al,Ti) layer and a Ni diffusion layer were observed from the interlayer to the TiAl substrate. Only one AlNi 3 layer formed at the multilayer/TiC cermet interface. The reaction behaviour of Al/Ni multilayers was characterized by means of differential scanning calorimeter (DSC) and X-ray diffraction. The initial exothermic peak of the DSC curve was formed due to the formation of Al 3 Ni and Al 3 Ni 2 phases. The reaction sequence of the Al/Ni multilayers was Al 3 Ni → Al 3 Ni 2 → AlNi → AlNi 3 and the final products were AlNi and AlNi 3 phases. The shear strength of the joint was tested and the experimental results suggested that the application of Al/Ni multilayers improved the joining quality. - Highlights: ► Diffusion bonding of TiAl to TiC cermet was realized using Al/Ni multilayer. ► The reaction sequence of the Al/Ni multilayers was Al 3 Ni → Al 3 Ni 2 → AlNi → AlNi 3 . ► The interfacial microstructure of the joint was clarified. ► The application of Al/Ni multilayers improved the joining quality.

Hot Corrosion Behavior of Stainless Steel with Al-Si/Al-Si-Cr Coating

Science.gov (United States)

Fu, Guangyan; Wu, Yongzhao; Liu, Qun; Li, Rongguang; Su, Yong

2017-03-01

The 1Cr18Ni9Ti stainless steel with Al-Si/Al-Si-Cr coatings is prepared by slurry process and vacuum diffusion, and the hot corrosion behavior of the stainless steel with/without the coatings is studied under the condition of Na2SO4 film at 950 °C in air. Results show that the corrosion kinetics of stainless steel, the stainless steel with Al-Si coating and the stainless steel with Al-Si-Cr coating follow parabolic laws in several segments. After 24 h corrosion, the sequence of the mass gain for the three alloys is the stainless steel with Al-Si-Cr coating coating coating. The corrosion products of the three alloys are layered. Thereinto, the corrosion products of stainless steel without coating are divided into two layers, where the outside layer contains a composite of Fe2O3 and FeO, and the inner layer is Cr2O3. The corrosion products of the stainless steel with Al-Si coating are also divided into two layers, of which the outside layer mainly consists of Cr2O3, and the inner layer is mainly SiO2. The corrosion film of the stainless steel with Al-Si-Cr coating is thin and dense, which combines well with substrate. Thereinto, the outside layer is mainly Cr2O3, and the inside layer is Al2O3. In the matrix of all of the three alloys, there exist small amount of sulfides. Continuous and protective films of Cr2O3, SiO2 and Al2O3 form on the surface of the stainless steel with Al-Si and Al-Si-Cr coatings, which prevent further oxidation or sulfide corrosion of matrix metals, and this is the main reason for the much smaller mass gain of the two alloys than that of the stainless steel without any coatings in the 24 h hot corrosion process.

Gate length scaling effect on high-electron mobility transistors devices using AlGaN/GaN and AlInN/AlN/GaN heterostructures.

Science.gov (United States)

Liao, S Y; Lu, C C; Chang, T; Huang, C F; Cheng, C H; Chang, L B

2014-08-01

Compared to AlGaN/GaN HEMT with 0.15 μm T-gate length, the AlInN/AlN/GaN one exhibits much higher current density and transconductance of 1558 mA/mm at Vd = 2 V and 330 mS/mm, respectively. The high extrinsic ft and fmax of 82 GHz and 70 GHz are extracted from AlInN/AlN/GaN HEMT. Besides, we find that the transconductance roll-off is significant in AlGaN/GaN, but largely improved in AlInN/AlN/GaN HEMT, suggesting that the high carrier density and lattice-matched epitaxial heterostructure is important to reach both large RF output power and high operation frequency, especially for an aggressively gate length scaling.

LA RAZÓN VITAL DE J. ORTEGA Y GASSET Y LA ANALÍTICA EXISTENCIAL DE M. HEIDEGGER

Directory of Open Access Journals (Sweden)

Francesco de Nigris

2012-01-01

Full Text Available En los reproches que José Ortega y Gasset le hace a Martin Heidegger sobre el problema del ser, al afirmar que este no puede ser un ciego punto de partida, una creencia, se evidencia la distancia entre dos perspectivas unidas por el horizonte real que pretenden explorar: la vida humana. Sin embargo, los resultados son distintos, porque el análisis del Existir humano (Dasein tiene como fin el descubrimiento del sentido general del ser, mientras que la concepción que Ortega tiene del ser como creencia, como interpretación histórica de la vida ligada a "un modo de pensar", hace que su análisis, la razón vital, sea un proyecto de salvación personal.

Editorial "La ingeniería industrial".

Directory of Open Access Journals (Sweden)

Ivan Santelices Malfanti

2013-07-01

Full Text Available La ingeniería industrial, área de la ingeniería que se dedica al diseño, la puesta en marcha y el mejoramiento de diversos tipos de sistemas productivos y de servicios, requiere de profesionales preparados en gestión de personal, equipos, recursos materiales y financieros, y especialmente los recursos de información y  tecnologías asociadas. Las principales áreas de conocimiento tradicionales, requeridas para el desempeño profesional, están ligadas a los métodos cuantitativos para apoyar la toma de decisiones,  economía, finanza, logística, producción, administración, estrategias empresariales y la gestión de recursos de información.

El papel de la societas mercatorum en la creación normativa: la lex mercatoria

Directory of Open Access Journals (Sweden)

Francisco López Ruiz

2010-06-01

Full Text Available En este trabajo se estudia el fenómeno de la creación privada del Derecho ligada al proceso de globalización económica. Más concretadamente, el papel de la societas mercatorum o business community  en la producción del Derecho.Se puede considerar como Derecho el conjunto de reglas – la lex mercatoria – elaboradas por asociaciones profesionales internacionales, grandes firmas de abogados y empresas transnacionales?. La tesis que mantendré es que la lex mercatoria  es, ciertamente un conjunto de reglas jurídicas altamente eficaces en el ámbito de los negocios internacionales. Sin embargo, tal eficacia no puede servir como criterio de legitimidad de la lex mercatoria.

La cultura como espacio lúdico desde la hermenéutica y el psicoanálisis de D. W. Winnicott

Directory of Open Access Journals (Sweden)

Barreiro, Julieta

2012-12-01

Full Text Available Este trabajo tiene por propósito vincular los términos cultura, jugar y espacio como comunes al psicoanálisis y a la hermenéutica. Desde el psicoanálisis de Winnicott estas nociones definen la subjetividad y la realidad psíquica, junto con la capacidad de creatividad ligada a la autenticidad del self. La hermenéutica de Heidegger define la realidad humana también como posibilidad (Existenz, mientras que Gadamer la considera como una categoría ontológica para comprender la historicidad del sujeto humano. Se puede afirmar entonces, que el punto de encuentro entre psicoanálisis y hermenéutica radica en la mutua implicancia entre juego, potencialidad e historicidad.

Some aspects of anelastic and microplastic creep of pure Al and two Al-alloys

Energy Technology Data Exchange (ETDEWEB)

Sgobba, S. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland)); Kuenzi, H.U. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland)); Ilschner, B. (Lab. de Metallurgie Mecanique, Dept. des Materiaux, Ecole Polytechnique Federale de Lausanne (Switzerland))

1993-11-01

Anelastic creep of pure Al, commercial Al-Cu and a binary Al-Cu alloy has been measured at room temperature by means of a high resolution laser interferometer. The irreversible component of the deformation was also quantified from measurements of the anelastic creep recovery. The dependence of the deformation-time curves on thermal treatment and cold work is analyzed. The mechanisms responsible for the room temperature anelastic creep are discussed. Materials loaded below their elastic limit can present either a pure anelastic behavior (commercial Al-Cu) or additional viscoelastic creep (pure Al, high purity Al-Cu). For commercial Al-Cu, the presence of an irreversible deformation appears to be mainly related to the state of the surface. A viscoelastic after effect has been measured for this alloy after a Cu-electroplating treatment. As a typical result for room temperature creep, the irreversible deformation depends logarithmically on load time. (orig.).

Some aspects of anelastic and microplastic creep of pure Al and two Al-alloys

International Nuclear Information System (INIS)

Sgobba, S.; Kuenzi, H.U.; Ilschner, B.

1993-01-01

Anelastic creep of pure Al, commercial Al-Cu and a binary Al-Cu alloy has been measured at room temperature by means of a high resolution laser interferometer. The irreversible component of the deformation was also quantified from measurements of the anelastic creep recovery. The dependence of the deformation-time curves on thermal treatment and cold work is analyzed. The mechanisms responsible for the room temperature anelastic creep are discussed. Materials loaded below their elastic limit can present either a pure anelastic behavior (commercial Al-Cu) or additional viscoelastic creep (pure Al, high purity Al-Cu). For commercial Al-Cu, the presence of an irreversible deformation appears to be mainly related to the state of the surface. A viscoelastic after effect has been measured for this alloy after a Cu-electroplating treatment. As a typical result for room temperature creep, the irreversible deformation depends logarithmically on load time. (orig.)

APOIO À DECISÃO DE COMPRA NA INDÚSTRIA DE CIMENTOS E DERIVADOS

OpenAIRE

Renan Felinto de Farias Aires; Leonardo Gevezier Braga; Jose Camelo Silveira Neto; Afrânio Galdino de Araújo

2017-01-01

O setor da construção civil é um dos mais dinâmicos setores da economia brasileira, impactando toda a complexa cadeia de atividades ligadas à construção, como, por exemplo, a produção de cimento. Assim, todas as indústrias ligadas à produção desse material necessitam tomar decisões da melhor maneira de forma a competirem no acirrado mercado brasileiro de cimento - quarto maior produtor do mundo. Por conta disso, o objetivo deste estudo é desenvolver um modelo multicritério para apoiar a compr...

A study of ion damage in Al, Al/Cu and Al/Ag

International Nuclear Information System (INIS)

Marikar, P.

1979-06-01

Specimens of pure aluminium, aluminium-copper and aluminium-silver have been irradiated with 20 keV helium ions and/or 100 keV aluminium ions and the nature of the damage assessed using transmission electron microscopy. Irradiation with 20 keV helium ions to a dose of 2.7 x 10 15 ions cm -2 results in the formation of interstitial loops and helium gas bubbles. The helium bubbles were detectable only after annealing at a high temperature following irradiation. When the helium preinjected aluminium specimens were irradiated with 100 keV Al + ions to a dose of 84 dpa at temperatures above 150 0 C, voids were observed to form. At a lower dose of 64 dpa, only a high density of dislocation loops was observed. Al-1 wt% Cu alloy containing partially coherent theta' precipitates resists void formation to a considerable extent, and Al-10 wt% Ag alloy containing coherent G.P. zones offers complete resistance to both dislocation loop nucleation and void formation. The experimental results are discussed in the light of the current theories of irradiation induced damage in metals. The importance of the dislocation-sink efficiency for point defects, the gaseous impurity and the alloying elements in determining void formation is highlighted. (author)

Interdiffusion between U(Mo,Pt) or U(Mo,Zr) and Al or Al A356 alloy

International Nuclear Information System (INIS)

Komar Varela, C.; Mirandou, M.; Arico, S.; Balart, S.; Gribaudo, L.

2009-01-01

Solid state reactions in chemical diffusion couples U-7 wt.%Mo-0.9 wt.%Pt/Al at 580 deg. C and U-7 wt.%Mo-0.9 wt.%Pt/Al A356 alloy, U-7 wt.%Mo-1 wt.%Zr/Al and U-7 wt.%Mo-1 wt.%Zr/Al A356 alloy at 550 deg. C were characterized. Results were obtained from optical and scanning electron microscopy, electron probe microanalysis and X-ray diffraction. The UAl 3, UAl 4 and Al 20 Mo 2 U phases were identified in the interaction layers of γU(Mo,Pt)/Al and γU(Mo,Zr)/Al diffusion couples. Al 43 Mo 4 U 6 ternary compound was also identified in γU(Mo,Zr)/Al due to the decomposition of γU(Mo,Zr) phase. The U(Al,Si) 3 and U 3 Si 5 phases were identified in the interaction layers of γU(Mo,Pt)/Al A356 and γU(Mo,Zr)/Al A356 diffusion couples. These phases are formed due to the migration of Si to the interaction layer. In the diffusion couple U(Mo,Zr)/Al A356, Zr 5 Al 3 phase was also identified in the interaction layer. The use of synchrotron radiation at Brazilian Synchrotron Light Laboratory (LNLS, CNPq, Campinas, Brazil) was necessary to achieve a complete crystallographic characterization.

CuAlO2 and CuAl2O4 thin films obtained by stacking Cu and Al films using physical vapor deposition

Science.gov (United States)

Castillo-Hernández, G.; Mayén-Hernández, S.; Castaño-Tostado, E.; DeMoure-Flores, F.; Campos-González, E.; Martínez-Alonso, C.; Santos-Cruz, J.

2018-06-01

CuAlO2 and CuAl2O4 thin films were synthesized by the deposition of the precursor metals using the physical vapor deposition technique and subsequent annealing. Annealing was carried out for 4-6 h in open and nitrogen atmospheres respectively at temperatures of 900-1000 °C with control of heating and cooling ramps. The band gap measurements ranged from 3.3 to 4.5 eV. Electrical properties were measured using the van der Pauw technique. The preferred orientations of CuAlO2 and CuAl2O4 were found to be along the (1 1 2) and (3 1 1) planes, respectively. The phase percentages were quantified using a Rietveld refinement simulation and the energy dispersive X-ray spectroscopy indicated that the composition is very close to the stoichiometry of CuAlO2 samples and with excess of aluminum and deficiency of copper for CuAl2O4 respectively. High resolution transmission electron microscopy identified the principal planes in CuAlO2 and in CuAl2O4. Higher purities were achieved in nitrogen atmosphere with the control of the cooling ramps.

Three-Dimensional FIB/EBSD Characterization of Irradiated HfAl3-Al Composite

Energy Technology Data Exchange (ETDEWEB)

Hua, Zilong; Guillen, Donna Post; Harris, William; Ban, Heng

2016-09-01

A thermal neutron absorbing material, comprised of 28.4 vol% HfAl3 in an Al matrix, was developed to serve as a conductively cooled thermal neutron filter to enable fast flux materials and fuels testing in a pressurized water reactor. In order to observe the microstructural change of the HfAl3-Al composite due to neutron irradiation, an EBSD-FIB characterization approach is developed and presented in this paper. Using the focused ion beam (FIB), the sample was fabricated to 25µm × 25µm × 20 µm and mounted on the grid. A series of operations were carried out repetitively on the sample top surface to prepare it for scanning electron microscopy (SEM). First, a ~100-nm layer was removed by high voltage FIB milling. Then, several cleaning passes were performed on the newly exposed surface using low voltage FIB milling to improve the SEM image quality. Last, the surface was scanned by Electron Backscattering Diffraction (EBSD) to obtain the two-dimensional image. After 50 to 100 two-dimensional images were collected, the images were stacked to reconstruct a three-dimensional model using DREAM.3D software. Two such reconstructed three-dimensional models were obtained from samples of the original and post-irradiation HfAl3-Al composite respectively, from which the most significant microstructural change caused by neutron irradiation apparently is the size reduction of both HfAl3 and Al grains. The possible reason is the thermal expansion and related thermal strain from the thermal neutron absorption. This technique can be applied to three-dimensional microstructure characterization of irradiated materials.

The Genyornis Egg: Response to Miller et al.'s commentary on Grellet-Tinner et al., 2016

Science.gov (United States)

Grellet-Tinner, Gerald; Spooner, Nigel A.; Handley, Warren D.; Worthy, Trevor H.

2017-04-01

Williams (1981) and Williams and Rich (1991) attributed Australian Quaternary fossil eggshell that differed from that of emu Dromaius novaehollandiae to the extinct bird Genyornis newtoni without any osteological or embryonic support. Such association by proximity or abundance mirrors the case of the mistaken association of oviraptor eggs to Protoceratops in the 1920's by Andrews (Grellet-Tinner and Makovicky, 2006). No other candidate species was considered, and this attribution has been unchallenged and followed by everyone thereafter. Much research has been done on this Australian eggshell, with one result being that the extinction of the parent of this eggshell is the most well documented for a taxon in Australia (e.g., Miller et al., 1999, 2005). Grellet-Tinner et al. (2016) raised several problems with the identity of the eggshell Williams (1981) attributed to Genyornis newtoni and suggested that extinct megapodes of the genus Progura were the more likely layer of this eggshell type, therein referred to as ;putative Genyornis oological material; (PGOM). Miller et al. (2017) challenged our hypothesis stating that ;Based on the dimensions of the reconstructed Spooner Egg,Grellet-Tinner et al. (2016)argue that PGOM is too small for a bird with the body mass estimated for Genyornis (168-275 kg) … …[and] …. None of the additional PGOM observations reported byGrellet-Tinner et al. (2016)are inconsistent with a Genyornis parent;. Here we take the opportunity to respond to their critique, the basis of which resolves into a few points, which we address in turn.

Characterization of Al/Ni multilayers and their application in diffusion bonding of TiAl to TiC cermet

Energy Technology Data Exchange (ETDEWEB)

Cao, J., E-mail: cao_jian@hit.edu.cn [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China); Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150001 (China); Song, X.G. [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China); Wu, L.Z. [Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150001 (China); Qi, J.L.; Feng, J.C. [State Key Lab of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin, 150001 (China)

2012-02-29

The Al/Ni multilayers were characterized and diffusion bonding of TiAl intermetallics to TiC cermets was carried out using the multilayers. The microstructure of Al/Ni multilayers and TiAl/TiC cermet joint was investigated. The layered structures consisting of a Ni{sub 3}(AlTi) layer, a Ni{sub 2}AlTi layer, a (Ni,Al,Ti) layer and a Ni diffusion layer were observed from the interlayer to the TiAl substrate. Only one AlNi{sub 3} layer formed at the multilayer/TiC cermet interface. The reaction behaviour of Al/Ni multilayers was characterized by means of differential scanning calorimeter (DSC) and X-ray diffraction. The initial exothermic peak of the DSC curve was formed due to the formation of Al{sub 3}Ni and Al{sub 3}Ni{sub 2} phases. The reaction sequence of the Al/Ni multilayers was Al{sub 3}Ni {yields} Al{sub 3}Ni{sub 2} {yields} AlNi {yields} AlNi{sub 3} and the final products were AlNi and AlNi{sub 3} phases. The shear strength of the joint was tested and the experimental results suggested that the application of Al/Ni multilayers improved the joining quality. - Highlights: Black-Right-Pointing-Pointer Diffusion bonding of TiAl to TiC cermet was realized using Al/Ni multilayer. Black-Right-Pointing-Pointer The reaction sequence of the Al/Ni multilayers was Al{sub 3}Ni {yields} Al{sub 3}Ni{sub 2} {yields} AlNi {yields} AlNi{sub 3}. Black-Right-Pointing-Pointer The interfacial microstructure of the joint was clarified. Black-Right-Pointing-Pointer The application of Al/Ni multilayers improved the joining quality.

UNDERSTANDING THE MULTIDIMENSIONAL ISLAMIC FAITH THROUGH ‘ABD AL-GHANI AL-NABULUSI’S MYSTICAL PHILOSOPHY

Directory of Open Access Journals (Sweden)

Naoki Yamamoto

2013-12-01

Full Text Available This paper tries to present a new perspective on Islamic faith and Muslim identity to Muslim minorities who are challenged in practicing or following Islamic law in non-Islamic countries or non-Muslims in the contemporary world. It will uncover the multidimensional perspective of the concept of faith based on sin (dhanb and repentance (tawbah through the mystical philosophy of a Syrian scholar, Abd al-Ghani al-Nabulusi (d. 1143/1741 of the 18th century Ottoman Damascus who contributed to the field of Sufism particularly based on Ibn ‘Arabi’s thought of wahdat al-wujud (oneness of being and insan kamil (the perfect man. Nabulusi believes that anyone who lived during the inexistence of prophet’s revelation, inhabited an isolated place cut off from information about Islam, or lived in dar al-harb and did not make a hijra to dar al-islam could not be regarded as sinful in their deeds. However, faith in Allah is essential and infidelity is not forgiven regardless whether or not they live in dar al-islam or dar al-harb. Further, Nabulusi insists that true faith can be achieved by understanding the sin of existence; the ignorance of the difference of existence between Allah and men.  [Artikel ini menjelaskan identitas keberagamaan umat Islam minoritas yang dituntut untuk menerapkan syariat, namun harus hidup di negara non-muslim, dengan mendiskusikan perspektif multidimensional terhadap konsep dosa dan tobat seperti dikembangkan oleh Abd al-Ghanī al-Nabulusī (1143/1741, seorang sufi pemikir Syria, khususnya  wahdat al-wujūd dan insan kamil, yang hidup di masa kesultanan Usmani di Damaskus. Nabulusī berkeyakinan bahwa siapa saja yang hidup sebelum turunnya wahyu di masa Nabi, hidup di daerah terpencil yang tidak mengenal Islam, atau hidup di dar al-harb dan tidak hijrah ke dar al-islam, tidaklah dibebani dosa atas perbuatannya. Namun demikian, iman kepada Allah amatlah penting dan kekufuran tidaklah dimaafkan, baik seseorang tersebut hidup

PRECIPITATION HARDENING IN B2-ORDERED NiAl BY Ni2AlTiCOMPOUND

Institute of Scientific and Technical Information of China (English)

W.H. Tian; K. Ohishi; M. Nemoto

2001-01-01

Microstructural variations and correlated hardness changes in B2-ordered NiAl containing fine precipitation of Ni2AlTi have been investigated by means of transmission electron microscopy (TEM) and hardness tests. The amount of age hardening is not large as compared to the large microstructural variations during aging. TEM observations have revealed that the L21-type Ni2AlTi precipitates keep a lattice coherency with the NiAl matrix at the beginning of aging. By longer periods of aging Ni2AlTi precipitates lose their coherency and change their morphology to the globular ones surrounded by misfit dislocations. The temperature dependence of the yield strength of precipitate-containing B2-ordered NiAl was investigated by compression tests over the temperature range of 873-1273K. The fine precipitation of Ni2AlTi was found to enhance greatly the yield strength and the high-temperature strength is comparison with that of superalloy Mar-M200.``

Rupture of Al matrix in U-Mo/Al dispersion fuel by fission induced creep

Energy Technology Data Exchange (ETDEWEB)

Jeong, Gwan Yoon; Sohn, Dong Seong [UNIST, Daejeon (Korea, Republic of); Kim, Yeon Soo [Argonne National Laboratory, Argonnge (United States); Lee, Kyu Hong [KAERI, Daejeon (Korea, Republic of)

2016-05-15

This phenomenon was found specifically in the dispersion fuel plate with Si addition in the Al matrix to suppress interaction layer (IL) formation between UMo and Al. It is known that the stresses induced by fission induced swelling in U-Mo fuel particles are relieved by creep deformation of the IL, surrounding the fuel particles, that has a much higher creep rate than the Al matrix. Thus, when IL growth is suppressed, the stress is instead exerted on the Al matrix. The observed rupture in the Al matrix is believed to be caused when the stress exceeded the rupture strength of the Al matrix. In this study, the possibility of creep rupture of the Al matrix between the neighboring U-Mo fuel particles was examined using the ABAQUS finite element analysis (FEA) tool. The predicted rupture time for a plate was much shorter than its irradiation life indicating a rupture during the irradiation. The higher stress leads Al matrix to early creep rupture in this plate for which the Al matrix with lower creep strain rate does not effectively relieve the stress caused by the swelling of the U-Mo fuel particles. For the other plate, no rupture was predicted for the given irradiation condition. The effect of creeping of the continuous phase on the state of stress is significant.

Effect of Al and AlP on the microstructure of Mn-30 wt.%Si alloy

Energy Technology Data Exchange (ETDEWEB)

Wu Yuying [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jing Shi Road 73, Jinan 250061 (China); Liu Xiangfa [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jing Shi Road 73, Jinan 250061 (China)], E-mail: xfliu@sdu.edu.cn

2008-04-15

Effect of Al and AlP particles on the microstructure of near eutectic Mn-Si alloy (Mn-30 wt.%Si) was studied by Electron Probe Micro-analyzer (EPMA) and Differential Scanning Calorimeter (DSC). Crystal lattice correspondence analyses show that both Al and AlP have good lattice matching coherence relationships with MnSi phase, and the addition of Al and AlP particles results in an abnormal eutectic structure, i.e. the eutectic constitution MnSi and Mn{sub 5}Si{sub 3} precipitate separately: MnSi precipitates firstly, and then the Mn{sub 5}Si{sub 3} phase.

Elastocaloric effect in CuAlZn and CuAlMn shape memory alloys under compression

OpenAIRE

Qian, Suxin; Geng, Yunlong; Wang, Yi; Pillsbury, Thomas E.; Hada, Yoshiharu; Yamaguchi, Yuki; Fujimoto, Kenjiro; Hwang, Yunho; Radermacher, Reinhard; Cui, Jun; Yuki, Yoji; Toyotake, Koutaro; Takeuchi, Ichiro

2016-01-01

This paper reports the elastocaloric effect of two Cu-based shape memory alloys: Cu68Al16Zn16 (CuAlZn) and Cu73Al15Mn12 (CuAlMn), under compression at ambient temperature. The compression tests were conducted at two different rates to approach isothermal and adiabatic conditions. Upon unloading at a strain rate of 0.1 s−1 (adiabatic condition) from 4% strain, the highest adiabatic temperature changes (ΔTad) of 4.0 K for CuAlZn and 3.9 K for CuAlMn were obtained. The maximum stress and hystere...

Formation of Al3Ti/Mg composite by powder metallurgy of Mg-Al-Ti system.

Science.gov (United States)

Yang, Zi R; Qi Wang, Shu; Cui, Xiang H; Zhao, Yu T; Gao, Ming J; Wei, Min X

2008-07-01

An in situ titanium trialuminide (Al 3 Ti)-particle-reinforced magnesium matrix composite has been successfully fabricated by the powder metallurgy of a Mg-Al-Ti system. The reaction processes and formation mechanism for synthesizing the composite were studied by differential scanning calorimetry (DSC), x-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). Al 3 Ti particles are found to be synthesized in situ in the Mg alloy matrix. During the reaction sintering of the Mg-Al-Ti system, Al 3 Ti particles are formed through the reaction of liquid Al with as-dissolved Ti around the Ti particles. The formed intermetallic particles accumulate at the original sites of the Ti particles. As sintering time increases, the accumulated intermetallic particles disperse and reach a relatively homogeneous distribution in the matrix. It is found that the reaction process of the Mg-Al-Ti system is almost the same as that of the Al-Ti system. Mg also acts as a catalytic agent and a diluent in the reactions and shifts the reactions of Al and Ti to lower temperatures. An additional amount of Al is required for eliminating residual Ti and solid-solution strengthening of the Mg matrix.

Al-‘Alāqah baina Ushūl al-Fiqh wa Maqāshidi al-Sharīah wa al-Da’wah ilā Ta’sīsi ‘Ilmi al-Maqāshid

Directory of Open Access Journals (Sweden)

Anggraini Binti Ramli

2016-12-01

Full Text Available The study of Maqāshid sharīa is an important point in the discussion of Islamic legal theory (ushūl al-fiqh. Serious debates began to emerge in the 19th century among Islamic jurists concerning the position of maqāshid sharīa. At least, there are three important debates in the history; first, whether maqāshid is part of the discussion ushūl al-fiqh; second, is maqāshid sharīa built upon a foundation of classical Islamic jurisprudence (fiqh; and third, whether the maqāshid sharīa study is able to become an independent science that is separated from the study of classical Islamic jurisprudence. This article tries to present a discussion of the three paradigms by employing a descriptive-analytic method. The results of this study uncover that the study of maqāshid sharīa is like two sides of one coin; theoretically it is a distinctive study from ushūl al-fiqh, but it cannot be separated from one another. Ushūl al-fiqh has become the foundation to find out more details about the study of maqashid sharia. The separation between classical Islamic jurisprudence (fiqh and maqāshid sharīa study conducted by Islamic jurists is a relative separation.

Solutional Landforms of Gabal Al-Qaraha, the Oasis of Al-Hasa, Saudi Arabia

OpenAIRE

Embabi, Nabil S.

1981-01-01

Jabal Al-Qarah is one of the small outlier hills at the Oasis of Al-Hasa, lying at about lOkm ENE of Al-Hafuf Town. The solutional forms of Al-Qarah hill discussed in this paper are as follows : 1. A calcareous duricrust which covers the top and some of the slopes of the hill. 2. Rock Pillars which are long columns of white lime-stone. 3. Huge crevasses which are wide erosional openings along vertical joints. 4. Narrow, sinuous caves inside the hill. 5. Pedestal rocks with mushroo...

Comparison on the interaction of Al3+/nano-Al13 with calf thymus DNA /salmon sperm DNA

Science.gov (United States)

Ma, Fei; Ma, Yue; Du, Changwen; Yang, Xiaodi; Shen, Renfang

2015-11-01

The conformation change, binding mode and binding site between Al3+/nano-Al13 and calf thymus DNA/salmon sperm DNA were investigated by UV-vis absorption, FTIR spectra, Raman spectroscopy and CD spectra, as well as melting curves measurement. The UV-vis spectra and circular dichroism spectra results suggested that the phosphate group structure was changed when Al3+ interacted with DNA, while the double-helix was distorted when nano-Al13 interacted with DNA. The FTIR and Raman spectroscopy revealed that the binding sites were Al3+ … PO2, Al3+ … N7/guanine PO2 … Al13 … N7-C8/guanine with calf thymus DNA, and Al3+ … N3-O2/cytosine, Al3+ … N7-C8/guanine, PO2 … Al13 … N7-C8/guanine, PO2 … Al13 … N1/adenine with salmon sperm DNA, respectively. The electrostatic binding was existed between Al3+ and DNA, and the electrostatic binding and complexing were found between nano-Al13 and DNA.

Bukti Kebenaran Al-quran

OpenAIRE

Aliyah, Sri

2015-01-01

Al Quran is the greatest miracles of Muhammad SAW as the direction of humankind in order to reach eternal happiness. Scientific evidences show that Al Quran has the truth massages, although it was released far before the finding of modern sciences. The researches continue to study the truth of Al Quran an it revealed the historical fact.

Sintering of (Ni,Mg)(Al,Fe)2O4 Materials and their Corrosion Process in Na3AlF6-AlF3-K3AlF6 Electrolyte

Science.gov (United States)

Xu, Yibiao; Li, Yawei; Yang, Jianhong; Sang, Shaobai; Wang, Qinghu

2017-06-01

The application of ledge-free sidewalls in the Hall-Héroult cells can potentially reduce the energy requirement of aluminum production by about 30 pct (Nightingale et al. in J Eur Ceram, 33:2761-2765, 2013). However, this approach poses great material challenges since such sidewalls are in direct contact with corrosive electrolyte. In the present paper, (Ni,Mg)(Al,Fe)2O4 materials were prepared using fused magnesia, reactive alumina, nickel oxide, and iron oxide powders as the starting materials. The sintering behaviors of specimens as well as their corrosion resistance to molten electrolyte have been investigated by means of X-ray diffraction and scanning electron microscope. The results show that after firing at temperature ranging from 1673 K (1400 °C) up to 1873 K (1600 °C), all the specimens prepared are composed of single-phase (Ni,Mg)(Al,Fe)2O4 composite spinel, the lattice parameter of which increases with increasing Fe3+ ion concentration. Increasing the iron oxide content enhances densification of the specimens, which is accompanied by the formation of homogeneously distributed smaller pores in the matrix. The corrosion tests show that corrosion layers consist of fluoride and Ni(Al,Fe)2O4 composite spinel grains are produced in specimens with Fe/Al mole ratio no more than 1, whereas dense Ni(Al,Fe)2O4 composite spinel layers are formed on the surface of the specimens with Fe/Al mole ratio more than 1. The dense Ni(Al,Fe)2O4 composite spinel layers formed improve the corrosion resistance of the specimens by inhibiting the infiltration of electrolyte and hindering the chemical reaction between the specimen and electrolyte.

Synthesis of Al(OH3 Nanostructures from Al(OH3 Microagglomerates via Dissolution-Precipitation Route

Directory of Open Access Journals (Sweden)

Bo Yu

2013-01-01

Full Text Available A facile method was developed to synthesize Al(OH3 nanostructures from Al(OH3 microagglomerates by dissolution in 9.0 mol·L−1 NaOH at 115°C followed by dilution and aging of the solution at room temperature. The influence of Al(OH3 nanoseed and surfactants as sodium dodecyl sulfate (SDS, polyethylene glycol 6000 (PEG6000, and cetyltrimethylammonium bromide (CTAB on the formation of the Al(OH3 nano-structures was investigated. The experimental results indicated that the Al(OH3 microspheres composed of nanoparticles were prepared in the blank experiment, while dispersive Al(OH3 nano-particles with a diameter of 80–100 nm were produced in the presence of Al(OH3 nano-seed and CTAB.

Effects of Al content on structure and mechanical properties of hot-rolled ZrTiAlV alloys

International Nuclear Information System (INIS)

Liang, S.X.; Yin, L.X.; Che, H.W.; Jing, R.; Zhou, Y.K.; Ma, M.Z.; Liu, R.P.

2013-01-01

Highlights: • Phase structure is greatly dependent on the Al content. • Intermetallic compound will precipitates while Al content is over 6.9 wt%. • Equiaxed α-phase grains present in the hot-rolled alloy with 6.9 wt% Al. • Alloys with Al content from 3.3 wt% to 5.6 wt% have good mechanical properties. - Abstract: Zirconium alloys show attractive properties for astronautic applications where the most important factors are anti-irradiation, corrosion resistance, anti-oxidant, very good strength-to-weight ratio. The effects of Al content (2.2–6.9 wt%) on structure and mechanical properties of the hot-rolled ZrTiAlV alloy samples were investigated in this study. Each sample of the hot-rolled ZrTiAlV alloys with Al contents from 2.2 wt% to 5.6 wt% is composed of the α phase and β phase, meanwhile, the relative content of the α phase increased with the Al content. However, the (ZrTi) 3 Al intermetallic compound was observed as the Al content increased to 6.9 wt%. Changes of phase compositions and structure with Al content distinctly affected mechanical properties of ZrTiAlV alloys. Yield strength of the alloy with 2.2 wt% Al is below 200 MPa. As Al content increased to 5.6 wt%, the yield strength, tensile strength and elongation of the examined alloy are 1088 MPa, 1256 MPa and 8%, respectively. As Al content further increased to 6.9 wt%, a rapid decrease in ductility was observed as soon as the (ZrTi) 3 Al intermetallic compound precipitated. Results show that the ZrTiAlV alloys with Al contents between 3.3 wt% and 5.6 wt% have excellent mechanical properties

Relationship between Al content and substitution mechanism of Al-bearing anhydrous bridgmanites

Science.gov (United States)

Noda, M.; Inoue, T.; Kakizawa, S.

2017-12-01

It is considered that two substitution mechanisms, Tschermak substitution and oxygen vacancy substitution, exist in MgSiO3 bridgmanite for the incorporation of Al in anhydrous condition. Kubo and Akaogi (2000) has conducted the phase equilibrium experiment in the system MgSiO3-Al2O3, and established the phase diagram up to 28 GPa. However the careful observation in the bridgmanite shows that the chemical compositions are slightly deviated from Tschermak substitution join. The same tendency can be also observed in the run products by Irifune et al. (1996). This result indicates that pure Tschermak substitution bridgmanite cannot be stable even in the MgSiO3-Al2O3 join experiment. However, the previous studies used powder samples as the starting materials, so the absorbed water may affect the results. Therefore, we tried to conduct the experiment in the join MgSiO3-Al2O3 in extremely anhydrous condition to clarify whether the pure Tschermak substitution bridgmanite can be stable or not. In addition, we also examined the stability of oxygen vacancy bridgmanite in the extremely anhydrous condition for the comparison. The high pressure synthesis experiments were conducted at 28 GPa and 1600-1700° for 1hour using a Kawai-type multi-anvil apparatus. Four different Al content samples were prepared as the starting materials along the ideal substitution line of Tschermak (Al=0.025, 0.05, 0.1, 0.15 mol) and oxygen-vacancy (Al=0.025, 0.05, 0.075, 0.1 mol) substitutions, respectively (when total cation of 2). The glass rods were used as the starting materials to eliminate the absorbed water on the sample surface. The chemical compositions of the synthesized bridgmanite could not be measured by EPMA because of small grain size less than submicron. Therefore the chemical compositions were estimated from the result of the XRD pattern by subtracting the amount of the other phases. The estimated chemical compositions of Tschermak substitution bridgmanites were consistent with the

Burden of rare variants in ALS genes influences survival in familial and sporadic ALS.

Science.gov (United States)

Pang, Shirley Yin-Yu; Hsu, Jacob Shujui; Teo, Kay-Cheong; Li, Yan; Kung, Michelle H W; Cheah, Kathryn S E; Chan, Danny; Cheung, Kenneth M C; Li, Miaoxin; Sham, Pak-Chung; Ho, Shu-Leong

2017-10-01

Genetic variants are implicated in the development of amyotrophic lateral sclerosis (ALS), but it is unclear whether the burden of rare variants in ALS genes has an effect on survival. We performed whole genome sequencing on 8 familial ALS (FALS) patients with superoxide dismutase 1 (SOD1) mutation and whole exome sequencing on 46 sporadic ALS (SALS) patients living in Hong Kong and found that 67% had at least 1 rare variant in the exons of 40 ALS genes; 22% had 2 or more. Patients with 2 or more rare variants had lower probability of survival than patients with 0 or 1 variant (p = 0.001). After adjusting for other factors, each additional rare variant increased the risk of respiratory failure or death by 60% (p = 0.0098). The presence of the rare variant was associated with the risk of ALS (Odds ratio 1.91, 95% confidence interval 1.03-3.61, p = 0.03), and ALS patients had higher rare variant burden than controls (MB, p = 0.004). Our findings support an oligogenic basis with the burden of rare variants affecting the development and survival of ALS. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

Influence of Al grain boundaries segregations and La-doping on embrittlement of intermetallic NiAl

Energy Technology Data Exchange (ETDEWEB)

Kovalev, Anatoly I., E-mail: a_kovalev@sprg.ru; Wainstein, Dmitry L.; Rashkovskiy, Alexander Yu.

2015-11-01

Highlights: • We investigated Al grain boundaries segregations in ordered pure and La-doped NiAl. • Structural segregation of Al decreases critical strain for brittle cracks nucleation. • La alloying sharply improves plasticity of NiAl intermetallic. • Metallicity of interatomic bonds on grain boundaries increases at La alloying. • We have experimentally measured by EELFS that La atoms are located in Al sublattice. - Abstract: The microscopic nature of intergranular fracture of NiAl was experimentally investigated by the set of electron spectroscopy techniques. The paper demonstrates that embrittlement of NiAl intermetallic compound is caused by ordering of atomic structure that leads to formation of structural aluminum segregations at grain boundaries (GB). Such segregations contain high number of brittle covalent interatomic bonds. The alloying by La increases the ductility of material avoiding Al GB enrichment and disordering GB atomic structure. The influence of La alloying on NiAl mechanical properties was investigated. GB chemical composition, atomic and electronic structure transformations after La doping were investigated by AES, XPS and EELFS techniques. To qualify the interatomic bonds metallicity the Fermi level (E{sub F}) position and electrons density (n{sub eff}) in conduction band were determined in both undoped and doped NiAl. Basing on experimental results the physical model of GB brittleness formation was proposed.

Heterogeneous nucleation of solid Al from the melt by Al 3 Ti : Molecular dynamics simulations

KAUST Repository

Wang, Junsheng; Horsfield, Andrew; Lee, Peter D.; Brommer, Peter

2010-01-01

It has been known experimentally for some time that Al3 Ti is a powerful nucleant for the solidification of aluminum from the melt; however, a full microscopic understanding is still lacking. To develop this understanding, we have performed molecular dynamics simulations of the nucleation and early stages of growth using published embedded atom method potentials for Al-Ti, but modified by us to stabilize the D 022 structure. We discover that Al3 Ti can indeed be very effective in promoting the growth of solid Al but the manner in which growth takes place depends sensitively on the surface on which the Al nucleates. In particular, complete growth of solid Al from the liquid on the (001) and (110) surfaces of Al3 Ti occurs at a lower temperature than on the (112) surface. This anisotropy agrees with observations in previous experiments. We explain this observation in terms of interfacial energies. On the preferential (111) surface of Al the solid-liquid interfacial energy is highest while the solid-vacuum energy is lowest. Our simulations also show that the extent of ordering taking place in liquid Al close to the Al 3 Ti substrate above the melting point correlates well with the effectiveness of the substrate as a nucleant below the melting temperature: this could provide a computationally efficient scheme to identify good nucleants. © 2010 The American Physical Society.

Heterogeneous nucleation of solid Al from the melt by Al 3 Ti : Molecular dynamics simulations

KAUST Repository

Wang, Junsheng

2010-10-27

It has been known experimentally for some time that Al3 Ti is a powerful nucleant for the solidification of aluminum from the melt; however, a full microscopic understanding is still lacking. To develop this understanding, we have performed molecular dynamics simulations of the nucleation and early stages of growth using published embedded atom method potentials for Al-Ti, but modified by us to stabilize the D 022 structure. We discover that Al3 Ti can indeed be very effective in promoting the growth of solid Al but the manner in which growth takes place depends sensitively on the surface on which the Al nucleates. In particular, complete growth of solid Al from the liquid on the (001) and (110) surfaces of Al3 Ti occurs at a lower temperature than on the (112) surface. This anisotropy agrees with observations in previous experiments. We explain this observation in terms of interfacial energies. On the preferential (111) surface of Al the solid-liquid interfacial energy is highest while the solid-vacuum energy is lowest. Our simulations also show that the extent of ordering taking place in liquid Al close to the Al 3 Ti substrate above the melting point correlates well with the effectiveness of the substrate as a nucleant below the melting temperature: this could provide a computationally efficient scheme to identify good nucleants. © 2010 The American Physical Society.

Strength of Al and Al-Mg/alumina bonds prepared using ultrahigh vacuum diffusion bonding

International Nuclear Information System (INIS)

King, W.E.; Campbell, G.H.; Wien, W.L.; Stoner, S.L.

1994-01-01

The authors have measured the cross-breaking strength of Al and Al-Mg alloys bonded with alumina. Diffusion bonding of Al and Al-Mg alloys requires significantly more bonding time than previously thought to obtain complete bonding. In contrast to previous diffusion bonding studies, fracture morphologies are similar to those obtained in bonds formed by liquid phase reaction; i.e., bonds are as strong or stronger than the ceramic; and fracture tends to propagate in the metal for pure Al and near the interface in the ceramic for the alloys. There are indications that the fracture morphology depends on Mg content and therefore on plasticity in the metal

Wear protection in cutting tool applications by PACVD (Ti,Al)N and Al2O3 coatings

International Nuclear Information System (INIS)

Kathrein, M.; Heiss, M.; Rofner, R.; Schleinkofer, U.; Schintlmeister, W.; Schatte, J.; Mitterer, C.

2001-01-01

Various (Ti,Al)N-, Al 2 O 3 -, and (Ti,Al)N/Al 2 O 3 multilayer coatings were deposited onto cemented carbide cutting tool inserts by a plasma assisted chemical vapor deposition (PACVD) technique. Al 2 O 3 coatings were deposited using the gaseous mixture AlCl 3 , Ar, H 2 , and O 2 . (Ti,Al)N intermediate layers were deposited in the same device using the process mentioned and the gases AICl 3 , Ar, H 2 , TiCl 4 and N 2 . The unique properties of (Ti,Al)N/Al 2 O 3 multilayer coatings result in superior wear protection for cutting inserts applied in severe multifunction cutting processes. The influence of different deposition temperatures an structure and properties of the coatings like crystallographic phases, chemical composition, mechanical and technological properties is shown. PACVD (Ti,Al)N/Al 2 O 3 coated cutting inserts with fine grained crystalline α/κ-Al 2 O 3 offer performance advantages which are superior with respect to coatings deposited by chemical vapor deposition (CVD) due to the low deposition temperature applied. (author)

Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

Science.gov (United States)

Pandit, Bhishma; Seo, Tae Hoon; Ryu, Beo Deul; Cho, Jaehee

2016-06-01

The current transport mechanism of graphene formed on AlxGa1-xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40) is investigated. The current-voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

Current transport mechanism in graphene/AlGaN/GaN heterostructures with various Al mole fractions

Directory of Open Access Journals (Sweden)

Bhishma Pandit

2016-06-01

Full Text Available The current transport mechanism of graphene formed on AlxGa1−xN/GaN heterostructures with various Al mole fractions (x = 0.15, 0.20, 0.30, and 0.40 is investigated. The current–voltage measurement from graphene to AlGaN/GaN shows an excellent rectifying property. The extracted Schottky barrier height of the graphene/AlGaN/GaN contacts increases with the Al mole fraction in AlGaN. However, the current transport mechanism deviates from the Schottky-Mott theory owing to the deterioration of AlGaN crystal quality at high Al mole fractions confirmed by reverse leakage current measurement.

Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

International Nuclear Information System (INIS)

Wolf, W.; Bolfarini, C.; Kiminami, C.S.; Botta, W.J.

2016-01-01

The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al 71 Co 13 Fe 8 Cr 8 , Al 77 Co 11 Fe 6 Cr 6 and Al 76 Co 19 Fe 4 Cr 1 were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al 71 Co 13 Fe 8 Cr 8 alloy. This work presents, for the first time, a detailed structural characterization of selected alloys in the Al-Co-Fe-Cr system close to the atomic composition Al 71 Co 13 Fe 8 Cr 8 . The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al 5 Co 2 and Al 13 Co 4 and are quasicrystalline approximants. Although the Al 5 Co 2 phase has already been reported in the Al 71 Co 13 Fe 8 Cr 8 alloy, the presence of the monoclinic Al 13 Co 4 is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al 13 Co 4 phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al 71 Co 13 Fe 8 Cr 8 alloy, the compositions Al 77 Co 11 Fe 6 Cr 6 and Al 76 Co 19 Fe 4 Cr 1 were chosen to be within the region of formation of the quaternary extension of the Al 13 Co 4 phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al-Co-Fe-Cr system, around the compositions studied, is composed of quaternary extensions of Al-Co intermetallic phases, which present solubility of Fe and Cr at Co atomic sites. - Highlights: •The Al rich region of the Al

Comparison of ALS functionality and plant growth in ALS-inhibitor susceptible and resistant Myosoton aquaticum L.

Science.gov (United States)

Liu, Weitang; Bai, Shuang; Jia, Sisi; Guo, Wenlei; Zhang, Lele; Li, Wei; Wang, Jinxin

2017-10-01

Herbicide target-site resistance mutations may cause pleiotropic effects on plant ecology and physiology. The effect of several known (Pro197Ser, Pro197Leu Pro197Ala, and Pro197Glu) target-site resistance mutations of the ALS gene on both ALS functionality and plant vegetative growth of weed Myosoton aquaticum L. (water chickweed) have been investigated here. The enzyme kinetics of ALS from four purified water chickweed populations that each homozygous for the specific target-site resistance-endowing mutations were characterized and the effect of these mutations on plant growth was assessed via relative growth rate (RGR) analysis. Plants homozygous for Pro197Ser and Pro197Leu exhibited higher extractable ALS activity than susceptible (S) plants, while all ALS mutations with no negative change in ALS kinetics. The Pro197Leu mutation increased ALS sensitivity to isoleucine and valine, and Pro197Glu mutation slightly increased ALS sensitivity to isoleucine. RGR results indicated that none of these ALS resistance mutations impose negative pleiotropic effects on relative growth rate. However, resistant (R) seeds had a lowed germination rate than S seeds. This study provides baseline information on ALS functionality and plant growth characteristics associated with ALS inhibitor resistance-endowing mutations in water chickweed. Copyright © 2017. Published by Elsevier Inc.

AL FIKR AL BALAGHI FI AL MA’ĂNI ‘INDA AS SAKĂKI FI KITABIHI MIFTAHUL ULUM DIRĂSAH BALAGHIYYAH

Directory of Open Access Journals (Sweden)

Talqis Nurdianto

2018-02-01

Full Text Available Miftāhul ‘Ulūm, written by al-Sakākī, especially the third part, was the beginning of a new phase in the development of Arabic rhetoric. Al-Sakākī divided the rhetoric into three fields of study, which are  (1 Ma’ānī, (2 Bayān, (3 Badī’. However, his style is influenced by philosophers, theologians and their verbal lexicon, which are difficult to take, especially for the ordinary recipient. Al-Sakākī described that his book containing several types of literature, namely, ‘ilm ṣarf in complete version and its conclusion, derivation science, and the grammatical study in the completeness of Ma’ānī and Bayān. The meaning of Makna is the study of completeness and conclusion. Therefore, books and prose, and poem require al-‘Arūḍ and al-Qawāfī include Ṣarf, Grammar, Ma’ānī, Bayān, limitation, reasoning, al’Arūḍ, and al-Qawāfī. He argued that the fields of study were influential in delivering knowledge to the student in order to reach the goal of the author towards his book.This research was an analytical descriptive study of al-Sakākī rhetoric that focused on the normative aspect represented by rhetorical rule and aesthetic aspects. Those aspects were shown by the feeling. Al-Sakākī rhetoric thought is a method based on mental division and has conducted in the construction of many factors, which the most important of them are philosophy and logic. Keywords: thought, rhetoric, meanings, sakkaki, study

A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

International Nuclear Information System (INIS)

Li Jianing; Chen Chuanzhong; Squartini, Tiziano; He Qingshan

2010-01-01

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti 3 Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti 3 Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti 3 Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti 3 Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

Study of the 27Al(n,2,)26Al reaction via accelerator mass spectrometry

International Nuclear Information System (INIS)

Wallner, A.

2000-06-01

The excitation function for the 27 Al(n,2n) 26 Al reaction is expected to show a strongly non-linear behavior in the neutron-energy region around 14 MeV, the neutron energy in D-T plasmas; thus the production rate of 26 Al (t 1/2 =7.2*10 5 a) in D-T fusion environments can in principle be used to measure the temperature of such plasmas. Existing measurements, however, are strongly discordant. Therefore, a new accurate measurement of the 27 Al(n,2n) 26 Al cross sections in the near threshold region (E n =13.5-14.8 MeV) was performed with the goal to achieve relative cross sections with the highest accuracy possible. In addition, the measurements were also designed to provide good absolute cross-section values, as absolute cross sections are important for radioactive waste predictions. Samples of Al metal were irradiated with neutrons in the energy range near threshold (E th =13.55 MeV) at the Radiuminstitutes of both Vienna and St. Petersburg, and in Tokai-mura, Japan. In Tuebingen irradiations with neutrons of higher energies (17 and 19 MeV) were performed. The amount of 26 Al produced during the irradiations was measured via accelerator mass spectrometry (AMS) at the Vienna Environmental Research Accelerator (VERA). This work represents the first 26 Al measurements for this new facility. With this system, a background as low as 3*10 -15 for 26 Al/ 27 Al isotope ratios was obtained, corresponding to a (n,2n) cross section of 0.04 mb. Utilizing AMS, cross sections with much higher precision and considerably closer to the threshold than in previous investigations could be measured. The prerequisite for its application as a temperature monitor, namely a very well known shape of the excitation function was met. A quantitative prediction of the sensitivity of this method for monitoring the temperature in a D-T fusion plasma was therefore possible. For thermal plasmas temperature changes in the order of 5 to 15 % should be detectable. An even higher sensitivity was found

Magnetostrictive properties of FeAl/polyester and FeAl/silicone composites

Energy Technology Data Exchange (ETDEWEB)

Riesgo, G. [Dpto. de Ciencias y Técnicas de la Navegación, Universidad de Oviedo, Campus universitario de Gijón, 33203 Gijón (Spain); Carrizo, J. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Elbaile, L., E-mail: elbaile@uniovi.es [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Crespo, R.D. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain); Sepúlveda, R. [Dpto. de Ingeniería Mecánica y de los Materiales, Universidad de Sevilla, Isla Cartuja, 41092 Sevilla (Spain); García, J.A. [Dpto. de Física de la Universidad de Oviedo, c/ Calvo Sotelo s/n, 33007 Oviedo (Spain)

2017-01-15

Highlights: • Nanocrystalline powders of FeAl have been obtained from the Fe{sub 81}Al{sub 19} ribbon produced by melt spinning. • The method allows the obtainment of a FeAl solid solution from the starting process. • The microstructure and magnetic properties of the powders were investigated. • Composites with a magnetostriction of 45 ppm have been obtained. - Abstract: Ribbons of composition Fe{sub 81}Al{sub 19} obtained by the melt spinning method have been used to yield powder by mechanical milling. Using this method, a rapid nanocrystallization and a FeAl solid solution phase was obtained from the start of the process. The microstructural and magnetic properties as well as the XRD patterns of the powders were studied in function of the milling time. Grain refinement and an increase of the coercive field were the main transformations resulting from increasing the milling time. Two sets of magnetostrictive composites were produced from the 100 h-milled powder. In one of them polyester was used as matrix and in the other one silicone. In the case of the silicone composites cured in a magnetic field of 140 mT in the longitudinal direction a saturation magnetostriction as high as 45 ppm was obtained.

Thermodynamic calculation of Al-Gd and Al-Gd-Mg phase equilibria checked by key experiments

International Nuclear Information System (INIS)

Groebner, J.; Kevorkov, D.; Schmid-Fetzer, R.

2001-01-01

The binary Al-Gd and the ternary Al-Gd-Mg systems were calculated using the Calphad method. It is demonstrated that previous interpretation of ternary liquidus temperatures below 700 C must be related to other phase equilibria. The actual ternary liquidus temperatures are much higher, up to some 600 C above the previous interpretation in literature. They are widely governed by the high-melting compounds Al 2 Gd and Al 3 Gd with liquidus surfaces stretching far into the ternary system. A small number of key experiments in this work confirmed the calculated liquidus temperature and the phase relations. The available experimental data in literature fit excellently with the calculation in the binary Al-Gd system. In the ternary Al-Gd-Mg system, which is shown in several sections of the phase diagram, a good agreement can be observed too, considering the necessary reinterpretation of the liquidus temperatures suggested by Rokhlin et al. Ternary solubilities were not found experimentally. The ternary compound Al 4 GdMg (τ) forms in a ternary peritectic reaction at 761 C. (orig.)

Forged HITEMAL: Al-based MMCs strengthened with nanometric thick Al{sub 2}O{sub 3} skeleton

Energy Technology Data Exchange (ETDEWEB)

Balog, Martin, E-mail: ummsbama@savba.sk [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia); Krizik, Peter; Nosko, Martin; Hajovska, Zuzana [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia); Victoria Castro Riglos, Maria [Centro Atómico Bariloche, Av. Bustillo 9.500, 8400 Bariloche, Río Negro (Argentina); Rajner, Walter [New Materials Development GmbH, Römerstrasse 28, 83410 Laufen, Leobendorf (Germany); Liu, De-Shin [National Chung Cheng University, 168 University Rd., Min-Hsiung, 62102 Chia-Yi, Taiwan (China); Simancik, Frantisek [Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Racianska 75, 83102 Bratislava (Slovakia)

2014-09-08

Bulk Al–Al{sub 2}O{sub 3} metal matrix composites (MMCs) named HITEMAL (high temperature aluminum) were fabricated in situ by forging compaction of five different types of gas-atomized commercial purity Al powders with a mean particle size in the range of 1–9 µm. As-forged HITEMAL consisted of (sub)micrometric Al grains (matrix) decorated with nanometric thick amorphous Al{sub 2}O{sub 3} (a-Al{sub 2}O{sub 3}) skeleton. Low-angle grain boundaries (LAGBs) free of Al{sub 2}O{sub 3} were located in the Al grain interior. The Al grain size and the portion of LAGBs increased with the increase in the relative powder surface area. As-forged HITEMAL shows excellent thermal stability up to 400 °C for 24 h. Annealing at temperatures ≥450 °C led to crystallization and morphological transformation from a-Al{sub 2}O{sub 3} skeleton to nanometric γ-Al{sub 2}O{sub 3} particles. Owing to the pinning effect of Al{sub 2}O{sub 3} phase, no Al grain growth took place during annealing up to 500 °C. HITEMAL showed attractive mechanical properties especially when tested at 300 °C (yield strength up to 220 MPa, Young's modulus up to 58 GPa). Despite the presence of a nearly continuous a-Al{sub 2}O{sub 3} skeleton along adjacent Al grains, forged HITEMAL materials had reasonable room temperature elongation of 7–26%. HITEMAL's elongation decreased as the Al grain size decreased and with increased testing temperature. The loss in elongation (uniform and total) was attributed to the inhomogeneous flow, which occurred due to high densities of high angle grain boundaries (dislocation sinks) and small content of LAGBs. The strength of HITEMAL stemmed from grain boundary mediated strengthening mechanisms. The results showed a positive deviation from the Hall–Petch plot, which is typical behavior of ultrafine-grained metals. Transformation of a-Al{sub 2}O{sub 3} skeleton to γ-Al{sub 2}O{sub 3} particles led to deterioration of the HITEMAL strength and Young's modulus.

Determination of Al concentration in Al doped ZnO using Auger spectra excited by Mo X-rays

International Nuclear Information System (INIS)

Toth, J.; Koever, L.; Cserny, I.; Varga, D.

2006-01-01

Complete text of publication follows. A good conductor with excellent transparency is of crucial importance for the window layer of CIGS solar cells. Al doped ZnO is a good candidate for this purpose, its conductivity depends on the concentration and chemical state of the Al dopant atoms. It was demonstrated that the non-conventional XPS using Mo X-rays for excitation is a very sensitive tool for the detection of Al, P, Si [1, 2, 3]. The present paper compares the experimental ratios for Zn/Al photoinduced peak intensity ratios obtained using both Al and Mo X-ray excitations. The Mo excited Zn/Al intensity ratios can be determined with higher selectivity and sensitivity than the Zn/Al intensity ratios excited by Al X-rays. The experiments were performed with a hemispherical deflector electron spectrometer [4]. The chemical state of the Al was identified to be close to that in Al 2 O 3 . The atomic concentrations were determined using a calibration curve based on ZnO/Al samples with known composition of Al. The energy dependent efficiency of the electron spectrometer was determined comparing REELS spectra of Cu specimen to standard spectra measured by K. Goto (Nagoya Institute of Technology, Japan). For evaluation of the Al atomic concentrations from the measured photoelectron intensities the photoionisation cross-sections of Band et al [5] and the IMFP data of S. Tanuma et al [6] and C.J. Powell and A. Jablonski [7] were used. (author)

Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

Science.gov (United States)

Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

2017-03-01

P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

Al-Shebab: An Al-Qaeda Affiliate Case Study (2Rev)

Science.gov (United States)

2017-10-01

deputies responsible for finance , administration, and security. Coordination among regional groups is common.10 The deputy leader of al-Shebab, Mukhtar...Maaliya (Ministry of Finance ) controlled taxation. A complex court system also emerged. Multiple training camps were built that focused on hand-to-hand...Nathan Chandler, Counterterrorism and Counterinsurgency in Somalia: Assessing the Campaign Against Al Shabaab, Rand Corporation , 2016, accessed 6/5

Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

OpenAIRE

Xiao Wang; Wei Wang; Jingli Wang; Hao Wu; Chang Liu

2017-01-01

P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgG...

Tadris Al Mufradat Li Tathbiq Maharah Al Kalam Fi Madrasah Al Muallimin Al Islamiyyah Li Mahad Bait Al Arqam Balong Jember

Directory of Open Access Journals (Sweden)

Muhammad Ardy Zaini

2017-06-01

Full Text Available There are four  skills in teaching Arabic. Ie listening, speaking, reading, and writing. Among these four, speaking considered one of the most important objectives of learning foreign language. In order to speak properly, one must know the vocabulary and apply it in a sentence. The aims of this research is to describe the teaching of vocabulary to apply the speaking skill in the school of Islamic teachers in the Institute of Bait al Arqom Balong Jember. This study used qualitative approach. The data collection was taken trough observation, personal interview, history and documentation. The teaching of vocabulary to apply the speaking skill at the Islamic Teachers' School at the Institute of Bait Al Arqam Balong Jember has gone well in terms of planning (general objectives and specific objectives, implementation (materials, use of the teaching method and teaching aids, and evaluation (assessment and evaluation. This teaching is to apply the speaking skill in terms of conversation or dialogue and lecture.

NEK1 genetic variability in a Belgian cohort of ALS and ALS-FTD patients.

Science.gov (United States)

Nguyen, Hung Phuoc; Van Mossevelde, Sara; Dillen, Lubina; De Bleecker, Jan L; Moisse, Matthieu; Van Damme, Philip; Van Broeckhoven, Christine; van der Zee, Julie

2018-01-01

We evaluated the genetic impact of the amyotrophic lateral sclerosis (ALS) risk gene never in mitosis gene a-related kinase 1 (NEK1) in a Belgian cohort of 278 patients with ALS (n = 245) or ALS with frontotemporal dementia (ALS-FTD, n = 33) and 609 control individuals. We identified 2 ALS patients carrying a loss-of-function (LOF) mutation, p.Leu854Tyrfs*2 and p.Tyr871Valfs*17, that was absent in the control group. A third LOF variant p.Ser1036* was present in 2 sibs with familial ALS but also in an unrelated control person. Missense variants were common in both patients (3.6%) and controls (3.0%). The missense variant, p.Arg261His, which was previously associated with ALS risk, was detected with a minor allele frequency of 0.90% in patients compared to 0.33% in controls. Taken together, NEK1 LOF variants accounted for 1.1% of patients, although interpretation of pathogenicity and penetrance is complicated by the observation of occasional LOF variants in unaffected individuals (0.16%). Furthermore, enrichment of additional ALS gene mutations was observed in NEK1 carriers, suggestive of a "second hit" model were NEK1 variants may modify disease presentation of driving mutations. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

The effect of ammonia flow in the AlN spacer on the electrical properties of InAlN/AlN/GaN HEMT structures

International Nuclear Information System (INIS)

Gamarra, Piero; Lacam, Cedric; Magis, Michelle; Tordjman, Maurice; Di Forte Poisson, Marie-Antoinette

2012-01-01

During the past few years it has been reported that a thin AlN spacer of few nanometers needs to be inserted in InAlN/GaN high electron mobility transistors (HEMTs) to obtain high 2DEG carrier mobility. This work presents a systematic study of the effects of varying the ammonia flow in the AlN spacer of InAlN/AlN/GaN HEMTs grown by low pressure metalorganic vapour phase epitaxy (LP-MOVPE). The strain state, the surface roughness and the growth rate of AlN were found to be dependent on the V/III ratio. In addition the ammonia flow in the interlayer has a strong impact on the structural properties of the subsequent InAlN barrier layer and on the electrical properties of the structure. A sheet resistance as low as 327 Ω/□ with a sheet carrier density of 1.5 x 10 13 cm -2 has been obtained at room temperature. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

The effect of ammonia flow in the AlN spacer on the electrical properties of InAlN/AlN/GaN HEMT structures

Energy Technology Data Exchange (ETDEWEB)

Gamarra, Piero; Lacam, Cedric; Magis, Michelle; Tordjman, Maurice; Di Forte Poisson, Marie-Antoinette [III-V Lab., Marcussis (France)

2012-01-15

During the past few years it has been reported that a thin AlN spacer of few nanometers needs to be inserted in InAlN/GaN high electron mobility transistors (HEMTs) to obtain high 2DEG carrier mobility. This work presents a systematic study of the effects of varying the ammonia flow in the AlN spacer of InAlN/AlN/GaN HEMTs grown by low pressure metalorganic vapour phase epitaxy (LP-MOVPE). The strain state, the surface roughness and the growth rate of AlN were found to be dependent on the V/III ratio. In addition the ammonia flow in the interlayer has a strong impact on the structural properties of the subsequent InAlN barrier layer and on the electrical properties of the structure.istance as low as 327 {omega}/{open_square} with a sheet carrier density of 1.5 x 10{sup 13} cm{sup -2} has been obtained at room temperature. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Assessment of phase constitution on the Al-rich region of rapidly solidified Al-Co-Fe-Cr alloys

Energy Technology Data Exchange (ETDEWEB)

Wolf, W., E-mail: witorw@gmail.com [Programa de Pós-Graduação em Ciência e Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Bolfarini, C., E-mail: cbolfa@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Kiminami, C.S., E-mail: kiminami@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil); Botta, W.J., E-mail: wjbotta@ufscar.br [Departamento de Engenharia de Materiais, Universidade Federal de São Carlos, Rod. Washington Luiz, Km 235, 13565-905 São Carlos, SP (Brazil)

2016-12-15

The formation of quasicrystalline approximants in rapidly solidified Al-Co-Fe-Cr alloys was investigated. Alloys of atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}, Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were produced using melt spinning and arc melting methods and their microstructural characterization was carried out by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Up to the present there is no consensus in the literature regarding the formation of quasicrystalline phase or quasicrystalline approximants in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy. This work presents, for the first time, a detailed structural characterization of selected alloys in the Al-Co-Fe-Cr system close to the atomic composition Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8}. The results indicated the samples to be composed, mostly, by two intermetallic phases, which are quaternary extensions of Al{sub 5}Co{sub 2} and Al{sub 13}Co{sub 4} and are quasicrystalline approximants. Although the Al{sub 5}Co{sub 2} phase has already been reported in the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the presence of the monoclinic Al{sub 13}Co{sub 4} is now identified for the first time in the as cast state. In the binary Al-Co system a quasicrystalline phase is known to form in a rapidly solidified alloy with composition close to the monoclinic and orthorhombic Al{sub 13}Co{sub 4} phases. This binary quasicrystalline phase presents an average valence electron per atom (e/a) between 1.7 and 1.9; thus, in addition to the Al{sub 71}Co{sub 13}Fe{sub 8}Cr{sub 8} alloy, the compositions Al{sub 77}Co{sub 11}Fe{sub 6}Cr{sub 6} and Al{sub 76}Co{sub 19}Fe{sub 4}Cr{sub 1} were chosen to be within the region of formation of the quaternary extension of the Al{sub 13}Co{sub 4} phase and also within the (e/a) of 1.7 to 1.9. However, no quasicrystalline phase is present in any of the studied alloys. The Al-Co-Fe-Cr system

Corrosion analysis of AlMg2 and AlMgSi using electrochemical method

International Nuclear Information System (INIS)

Dian A; Maman Kartaman; Rosika K; Yanlinastuti

2014-01-01

Corrosion test of cladding materials and structures of research reactor fuel, AlMgSi and AlMg2 have been performed in demineralized water of pH 2 and 6.7 using an electrochemical method. Corrosion phenomenon is affected by several factor such as composition and condition of solution. The purpose of this activity is to investigate the corrosion phenomena through the determination of the parameters of corrosion and polarization curve. The materials used are AlMg2 and AlMgSi alloy in circular dish shape with an area of 1 Cm"2. Preparation of the test sample is performed through several stages polishing, cleaning and drying procedures followed ASTM G3. The electrochemical method is done by measuring the open circuit potential (OCP), polarization resistance and potentiodynamic in demineralized water of pH 2 and pH 6.7 at temperature of 25°C. The results of the OCP is the corrosion potential (Ecorr) of AlMg2 and AlMgSi each of -906.1 mV and -619.8 mV at pH 2 and -868.6 and -756.7 mV at pH 6.7 mV. The results of measurements by polarization resistance technique showed that the corrosion rate of AlMg2 and AlMgSi in safe category (<2 mpy) at pH 6.7 and at pH 2 corrosion rate increased significantly, but still in the lightweight category (<20 mpy). Potentiodynamic curves showed that the passivation at pH 6.7 is very low while the passivation at pH 2 occurs within a relatively short range potential and followed events corroded. (author)

Catalytic effect of Al and AlN interlayer on the growth and properties of containing carbon films

International Nuclear Information System (INIS)

Zhou, Bing; Liu, Zhubo; Tang, Bin; Rogachev, A.V.

2015-01-01

Highlights: • DLC and CN x bilayers with Al (AlN) interlayer were fabricated by cathode arc technique. • Complete diffusion of Al and C atoms occurs at the interface of Al/DLC (CN x ) bilayer. • Al/CN x bilayer presents a higher content of Csp 3 /Csp 2 bonds. • The hardness of Al/DLC bilayer decreases but increases for the other bilayers. • Morphology of the bilayers was explained by growth mechanism of DLC and surface state of substrate. - Abstract: Diamond-like carbon (DLC) and carbon nitride (CN x ) bilayer films with Al and AlN interlayer were fabricated by pulse cathode arc technique. The structure, composition, morphology and mechanical properties of the films were investigated by Raman, Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), Knoop sclerometer and surface profilometer. The results indicated that the complete diffusion between C and Al atoms occurs in the Al/DLC and Al/CN x bilayer. Al interlayer induces the increase of the size and ordering of Csp 2 clusters in the films but AlN interlayer increases the disordering degree of Csp 2 clusters. XPS results showed that a higher content of Csp 3 /Csp 2 bonds presents in the Al/CN x bilayer, and Al and AlN interlayer decreases the atomic ratio of N/C. AFM with phase contrast mode illustrated the morphologic characteristics of the bilayer films. All the bilayers show a nano-structural surface. The morphology changes of the bilayer were well explained by the surface state of the substrate and the growth mechanism of DLC films. The hardness of Al/DLC bilayer decreases but it increases for the other bilayers compared to the corresponding DLC (CN x ) monolayer. The internal stress of the bilayer is significantly lower than that of the monolayer except for the AlN/CN x bilayer. These studies could make the difference at the time of choosing a suitable functional film for certain application

Characteristics in AlN/AlGaN/GaN Multilayer-Structured High-Electron-Mobility Transistors

International Nuclear Information System (INIS)

Gui-Zhou, Hu; Ling, Yang; Li-Yuan, Yang; Si, Quan; Shou-Gao, Jiang; Ji-Gang, Ma; Xiao-Hua, Ma; Yue, Hao

2010-01-01

A new multilayer-structured AlN/AlGaN/GaN heterostructure high-electron-mobility transistor (HEMT) is demonstrated. The AlN/AlGaN/GaN HEMT exhibits the maximum drain current density of 800 mA/mm and the maximum extrinsic transconductance of 170 mS/mm. Due to the increase of the distance between the gate and the two-dimensional electron-gas channel, the threshold voltage shifts slightly to the negative. The reduced drain current collapse and higher breakdown voltage are observed on this AlN/AlGaN/GaN HEMT. The current gain cut-off frequency and the maximum frequency of oscillation are 18.5 GHz and 29.0 GHz, respectively. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

60Co gamma radiation effect on AlGaN//AlN/GaN HEMT devices

International Nuclear Information System (INIS)

Wang Yanping; Luo Yinhong; Wang Wei; Zhang Keying; Guo Hongxia; Guo Xiaoqiang; Wang Yuanming

2013-01-01

The testing techniques and experimental methods of the 60 Co gamma irradiation effect on AlGaN/AlN/GaN high electron mobility transistors (HEMTs) are established. The degradation of the electrical properties of the device under the actual radiation environment are analyzed theoretically, and studies of the total dose effects of gamma radiation on AlGaN/AlN/GaN HEMTs at three different radiation bias conditions are carried out. The degradation patterns of the main parameters of the AlGaN/AlN/GaN HEMTs at different doses are then investigated, and the device parameters that were sensitive to the gamma radiation induced damage and the total dose level induced device damage are obtained. (authors)

Cu-segregation at the Q'/α-Al interface in Al-Mg-Si-Cu alloy

International Nuclear Information System (INIS)

Matsuda, Kenji; Teguri, Daisuke; Uetani, Yasuhiro; Sato, Tatsuo; Ikeno, Susumu

2002-01-01

Cu segregation was detected at the Q ' /α-Al interface in an Al-Mg-Si-Cu alloy by energy-filtered transmission electron microscopy. By contrast, in a Cu-free Al-Mg-Si alloy no segregation was observed at the interface between the matrix and Type-C precipitate

Effect of Al-5Ti-0.62C-0.2Ce Master Alloy on the Microstructure and Tensile Properties of Commercial Pure Al and Hypoeutectic Al-8Si Alloy

Directory of Open Access Journals (Sweden)

Wanwu Ding

2017-06-01

Full Text Available Al-5Ti-0.62C-0.2Ce master alloy was synthesized by a method of thermal explosion reaction in pure molten aluminum and used to modify commercial pure Al and hypoeutectic Al-8Si alloy. The microstructure and tensile properties of commercial pure Al and hypoeutectic Al-8Si alloy with different additions of Al-5Ti-0.62C-0.2Ce master alloy were investigated. The results show that the Al-5Ti-0.62C-0.2Ce alloy was composed of α-Al, granular TiC, lump-like TiAl3 and block-like Ti2Al20Ce. Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 5 min can significantly refine macro grains of commercial pure Al into tiny equiaxed grains. The Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 30 min still has a good refinement effect. The tensile strength and elongation of commercial pure Al modified by the Al-5Ti-0.62C-0.2Ce master alloy (0.3 wt %, 5 min increased by roughly 19.26% and 61.83%, respectively. Al-5Ti-0.62C-0.2Ce master alloy (1.5 wt %, 10 min can significantly refine both α-Al grains and eutectic Si of hypoeutectic Al-8Si alloy. The dendritic α-Al grains were significantly refined to tiny equiaxed grains. The morphology of the eutectic Si crystals was significantly refined from coarse needle-shape or lath-shape to short rod-like or grain-like eutectic Si. The tensile strength and elongation of hypoeutectic Al-8Si alloy modified by the Al-5Ti-0.62C-0.2Ce master alloy (1.5 wt %, 10 min increased by roughly 20.53% and 50%, respectively. The change in mechanical properties corresponds to evolution of the microstructure.

Tailoring ultrafine grained and dispersion-strengthened Ti2AlC/TiAl ...

Indian Academy of Sciences (India)

and Ti-Al pre-alloyed powders at low temperature of 1150◦C. The composite mainly consisted ... Metal–matrix composites; mechanical properties; microstructures; sintering. 1. Introduction γ-TiAl-based intermetallic alloys have been extensively.

Stagnation of the exploitation of Al ores and the depression of world prices of Al

Directory of Open Access Journals (Sweden)

Slavkovský Jozef

1999-03-01

Full Text Available In the contribution, data on Al – a metal of the 20th century are compiled together with the problems of genesis of the Al mineral raw ma-terials as well as types of bauxite and Al-laterite deposits. Furthermore, an overview of the world exploitation of bauxite during 1935-1980 is given along with the prognoses to 2000 and present situation (1992-1996. Overviews of the production of Al follows, providing its rela-tion to the bauxite exploitation. Contrary to the prognoses, a stabilization or stagnation has been observed in the exploitation of bauxite and production of Al during nineties, which a tendency is directly reflected in the world price of this commodity. When analyzing the Al prices for a longer period, some serious deviations can be noticed, that however presently represent a long-term minimum. We hope the stagnation of the production and the price decline are only temporary and new possibilities of the utilization of Al will be found soon.

A study on preparation and hydriding of β-Mg2Al3 and γ-Mg17Al12

International Nuclear Information System (INIS)

Hadi Suwarno

2009-01-01

The mechanism of the synthetic formation of β-Mg 2 Al 3 and γ-Mg 17 Al 12 has been studied. Mechanical alloying of Mg and Al powders with the atomic ratio of Mg:Al = 2:3 in toluene solution yields β-Mg 2 Al 3 compound after milling for 30 h. The γ-Mg 17 Al 12 can be formed by heating the β-Mg 2 Al 3 at 430°C under high vacuum. The measured hydrogen capacities of β-Mg 2 Al 3 and γ-Mg 17 Al 12 as hydride at 300°C are 3.2 and 4.9 wt%, respectively. Microstructure of the Mg-Al specimen shows that on hydriding at 300°C the polygonal shape of the γ-Mg 17 Al 12 changes into irregular shapes which are composed of γ-MgH 2 and Al. (author)

Marinbiologisk optegnelse i NUḪBAT AL-DAHR FĪ ʿAǦ ʾIB AL-BARR WA-AL-BAḤR

OpenAIRE

Provencal, Philippe

2014-01-01

I det arabiske geografiske værk NUḪBAT AL-DAHR FĪ ʿAǦ ʾIB AL-BARR WA-AL-BAḤR (færdigskrevet mellem 1324 og 1327) fra omtales seks dyr fra Adenbugten. Det dreje sig om savrokke, kuglefisk, pilrokke, pindsvinefisk og hvalhaj. Det sidste dyr har ikke kunnet bestemmes. Artiklen bringer en oversættelse af optegnelsen til engelsk samt både en filologisk som en biologisk kommentar. The aim of this article is to present a medieval Arabic report regarding sixanimals from the Gulf of Aden, to provid...

MOSQUE ARCHITECTURE AS A SUSTAINABLE BUILDING IN URBAN (Case Study: Al Markas Al Islamic Mosque Makassar

Directory of Open Access Journals (Sweden)

Imriyanti Imriyanti

2014-02-01

Full Text Available Abstract Mosque Architecture is a part of Islamic architecture. Mosque should be fused with elements of nature because its function as a place to pray to God who created the universe. Al Markas Al Islamic Makassar mosque is used as a center of Islamic aspirations of the people and the government to accommodate all the activities of moslems in Makassar. Through this function, the provision of Al Markas Al Islamic mosque began from the desire of Islamic societies in Makassar, which wants the Islamic center to be equipped with facilities and infrastructure as well as architectural, monumental buildings and structures that can be last for hundreds of years (continuous, blend with the environment, and also can be used by the public. Having regard to the function of a mosque especially at the Al Markas Al Islamic Makassar mosque, then the problem that arise is how the Al Markas Al Islamic mosque can be survived/sustainable  in order  to function  as a place  of worship  and  as a center  of Islam.  This research  is a descriptive qualitative research that is trying to generate data in the form of systematic and accurate picture of the object of study. The sustaiprophetlity  of Al Markas AL Islamic mosque can be known through the concept of Islam  in accordance with the view of Islam as well as the sustaiprophetlity of the buildings that seen in the spatial pattern of the mosque, appearance, natural lighting, natural ventilation, and user behavior of the mosque. Keywords: mosque architecture, sustaiprophetlity, view of Islam     Abstrak Arsitektur masjid merupakan bagian dari arsitektur Islam. Bangunan masjid sebaiknya dapat menyatu dengan unsur alam karena masjid difungsikan sebagai wadah dalam bersujud/sembahyang  kepada Allah SWT yang menciptakan alam semesta ini. Masjid Al Markas Al Islamic Makassar merupakan kompleks kegiatan Islam yang digunakan sebagai pusat aspirasi masyarakat  dan pemerintahan  yang dapat menampung �

Adhesive and tribocorrosive behavior of TiAlPtN/TiAlN/TiAl multilayers sputtered coatings over CoCrMo

Science.gov (United States)

Canto, C. E.; Andrade, E.; Rocha, M. F.; Alemón, B.; Flores, M.

2017-09-01

The tribocorrosion resistance and adherence of multilayer coatings of TiAlPtN/TiAlN/TiAl synthesized by PVD reactive magnetron sputtering over a CoCrMo alloy substrate in 10 periods of 30 min each were analyzed and compared to those of the substrate alone and to that of a TiAlPtN single layer coating of the same thickness. The objective of the present work was to create multilayers with different amounts of Pt in order to enhance the tribocorrosion resistance of a biomedical alloy of CoCrMo. Tribocorrosion tests were performed using Simulated Body Fluid (SBF) at typical body temperature with a tribometer in a pin on disk test. The elemental composition and thickness of the coating which behave better at the tribocorrosion tests were evaluated by means of RBS (Rutherford Backscattering Spectroscopy) IBA (Ion Beam Analysis) technique, using an alpha particles beam of 1.8 MeV, before and after the reciprocating motion in the tribocorrosion test. In order to simulate the elemental profile of the samples, the SIMNRA simulation computer code was used. Measurements of the adhesion of the coatings to the substrate were carried on by means of a scratch test using a tribometer. By taking micrographs of the produced tracks, the critical loads at which the coatings are fully separated from the substrate were determined. From these tests it was observed that a coating with 10 min of TiAlPtN in a TiAlPtN/TiAl period of 30 min in multilayers of 10 periods and with an average thickness of 145 nm for the TiAlPtN nanolayers had the best tribocorrosion resistance behavior, compared to that of the CoCrMo alloy. The RBS experiments showed a reduction of the thickness of the films along with some loss of the multilayer structure after the reciprocating motion. The adhesion tests indicated that the multilayer with the average TiAlPtN thickness of 145 nm displayed the highest critical load. These results indicate a high correlation between the adherence and the tribocorrosion behavior.

Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

Science.gov (United States)

Simões, Sónia; Viana, Filomena; Koçak, Mustafa; Ramos, A. Sofia; Vieira, M. Teresa; Vieira, Manuel F.

2012-05-01

In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al2NiTi and AlNiTi, and zones 2 and 3 to NiAl.

Al-quran dalam Perspektif Budaya

OpenAIRE

Sudrajat, Ajat

2009-01-01

Al-Quran merupakan kitab suci terakhir yang diturunkan kepada manusia. Tujuan utama diturunkannya al-Quran adalah sebagai kitab petunjuk yang meliputi bidang akidah, syariah, dan akhlak. Akan tetapi di luar ketiga petunjuk tersebut, al-Quran telah memberikan motivasi dan inspirasi kepada umat Islam dalam berbagai bidang kehidupan sehingga melahirkan jenis budaya tertentu. Dialog intelektual yang dilakukan secara kreatif oleh umat Islam terhadap al-Quran ternyata telah menghasilkan lahirnya ge...

ITIJAHAT KAUN AL-NABI WA AL-RASUL FI SYAKHSIYAH MUHAMMAD FI NATSR MAULID AL-BARZANJI

Directory of Open Access Journals (Sweden)

Himmah Istomah

2017-08-01

Full Text Available One of human personalities is humanist. Based on the understanding of Maslow’s theory of motivation, researcher seeks to uncover kinds of motivational needs of Muhammad Saw contained in Maulid Al-Barzanjiy (the work of Ja 'far bin Hasan al-Barzanji (d. 1763 M. The goal is realized through a descriptive qualitative approach with  text analysis  about Psycholiterature of Endraswara. The results of this study indicate that in Maulid Al-Barzanji there are Muhammad Saw’s five needs and how their satisfying perfectly,  namely: physiological needs, safety, social, esteem, and self-actualization. Thus, it can be interpreted that Muhammad SAW as an ordinary human having motivational needs. His prophetic and apostleship honor is not a direct blessing from Allah, but he had been through some complicated processes in life. This can be applied by his followers, so they can complete their motivational needs to reach the satiation as a caliph and to be useful person in this world.

Microstructure and bonding mechanism of Al/Ti bonded joint using Al-10Si-1Mg filler metal

International Nuclear Information System (INIS)

Sohn, Woong H.; Bong, Ha H.; Hong, Soon H.

2003-01-01

The microstructures and liquid state diffusion bonding mechanism of cp-Ti to 1050 Al using an Al-10.0wt.%Si-1.0wt.%Mg filler metal with 100 μm in thickness have been investigated at 620 deg. C under 1x10 -4 Torr. The effects of bonding process parameters on microstructure of bonded joint have been analyzed by using an optical microscope, AES, scanning electron microscopy and EDS. The interfacial bond strength of Al/Ti bonded joints was measured by the single lap shear test. The results show that the bonding at the interface between Al and filler metal proceeds by wetting the Al with molten filler metal, and followed by removal of oxide layer on surface of Al. The interface between Al and filler metal moved during the isothermal solidification of filler metal by the diffusion of Si from filler metal into Al layer. The interface between Al and filler metal became curved in shape with increasing bonding time due to capillary force at grain boundaries. The bonding at the interface between Ti and filler metal proceeds by the formation of two different intermetallic compound layers, identified as Al 5 Si 12 Ti 7 and Al 12 Si 3 Ti 5 , followed by the growth of the intermetallic compound layers. The interfacial bond strength at Al/Ti joint increased with increasing bonding time up to 25 min at 620 deg. C. However, the interfacial bond strength of Al/Ti joint decreased after bonding time of 25 min at 620 deg. C due to formation of cavities in Al near Al/intermetallic interfaces

Micromechanisms of fracture and fatigue in Ti3Al based and TiAl based intermetallics

International Nuclear Information System (INIS)

James, A.W.; Chave, R.A.; Hippsley, C.A.; Bowen, P.

1993-01-01

Micromechanisms of fracture and fatigue crack growth resistance in specific Ti 3 Al based and TiAl based intermetallics are reviewed. Effects of test temperature, environment and microstructure on crack growth resistance are considered in detail for several Ti 3 Al and Ti'Al based intermetallic systems under development. The implications of these studies for the structural reliability of these materials is also addressed briefly. (orig.)

Core electron binding energy shifts of AlBr3 and Al2Br6 vapor

International Nuclear Information System (INIS)

Mueller, Astrid M.; Plenge, Juergen; Leone, Stephen R.; Canton, Sophie E.; Rude, Bruce S.; Bozek, John D.

2006-01-01

The Al 2p and Br 3d inner-shell photoelectron spectra of aluminum tribromide monomer and dimer vapor were measured at 90 and 95 eV photon energy, respectively, to determine the core electron binding energies of the atoms in the two molecular species. While AlBr 3 has three identical Br atoms, Al 2 Br 6 exhibits four terminal and two bridging Br atoms. The species are identified by their distinct valence photoelectron spectra. Comparison of the observed Al 2p 1/2 and Al 2p 3/2 electron binding energies of AlBr 3 with those of Al 2 Br 6 shows that there is a chemical shift of (0.15 ± 0.03) eV to lower energy in the dimer. In Al 2 Br 6 , an assignment is proposed in which the Br 3d 3/2 and Br 3d 5/2 binding energies of terminal Br atoms are (1.18 ± 0.03) eV lower than those of bridging Br atoms. This assignment assumes that both types of Br atoms have similar cross-sections for ionization. With this result, the Br 3d 3/2 and Br 3d 5/2 binding energies of Br atoms in AlBr 3 are (0.81 ± 0.03) eV lower than those of bridging Br atoms of the dimer but (0.37 ± 0.03) eV higher than those of terminal Br atoms of the dimer. The obtained chemical shifts are considered in terms of the binding relations and electron density distributions in both molecules. Chemical shifts that are larger than a few hundred millielectron volts, as observed in the Al 2 Br 6 /AlBr 3 system, offer potential to study the dissociation dynamics of the dimer in a femtosecond visible or ultraviolet-pump/XUV-probe experiment

PENDEKATAN HERMENEUTIK DALAM PEMAHAMAN HADIS (Kajian Kitab Fath al-Bari Karya Ibn Hajar Al-‘Asqalani

Directory of Open Access Journals (Sweden)

Agusni Yahya

2014-12-01

Full Text Available The hadith explanation book of Sahih al-Bukhari written by Ibn Hajar Al-‘Asqalani, Fath al-Bari, is one of the most pupular books in Moslem ummah. Is widely used by Moslem scholars to meet the meanings of hadiths compiled by the imam al-Bukhari in his Sahih al-Bukhari. Fath al-Bari is considered significant to do the research on it in order to develop the science of hadith, mainly through the hermeneutic method. By using this method, the research questions are: 1. How does Ibn Hajar Al-‘Asqalani explain the matans (hadith texts of Sahih al Bukhari in connection with hermeneutic method? 2. What are the hermeneutic principles used by Ibn Hajar Al-‘Asqalani in his explanations of hadith? This research is expected to respond the research questions above so that it can be implimented the field of hadith in relation to develop hadith methodology. Finally, the research uncover that in his explanations of hadiths,  Ibn Hajar Al-‘Asqalani is oriented his world views to the classical Islam, the era of Prophet’s companions and their successors, the Salaf al-Salih. He does not express the Islamic world issues available in his time in his explanations of the hadiths. He is considered a normative ‘ulama since he is not influenced by the emerging cases situated his time in Egypt, Mecca and Madina. He tends to be textual to explain the matans of hadiths although to some extent he uncovers the historical contexts of the hadiths he explains. This is common for a muhadith  whose main jobs is to collect and narrate the whole data on Prophet's sayings, acts and permissions either on sanads (narrators or matans (texts.Keywords:  Fath al-Bari; sharh al-hadith; hermeneutik.

Avaliação de suscetibilidade a inundações utilizando geotecnologias para a bacia hidrográfica do rio Cachoeira - Joinville/SC

OpenAIRE

Muller, Cristiane Regina

2012-01-01

O conhecimento das áreas de risco sujeitas a inundações é uma informação fundamental para o poder público, seja para ações ligadas ao ordenamento territorial como também para a organização das ações da defesa civil em situações de emergência ligadas a eventos desta natureza. Como abordagem teórica, a pesquisa sustentou-se, especialmente, nos conceitos ligados a ordenamento territorial, bacias hidrográficas, desastres naturais e geotecnologias. Realizou-se a avaliação e mapeamento das variávei...

Thermophysical properties of αAl2O3, MgAl2O4 and AlN at low tempertures

International Nuclear Information System (INIS)

Burghartz, S.

1995-12-01

A possibility for producing energy in future might be the nuclear fusion. The process of nuclear fusion is characterized by melting nuclei of hydrogen atoms (deuterium and tritium) which yield to the production of helium atom nuclei. For this process extremely high temperatures of the deuterium-tritium-gas plasma are necessary. The additional heating of the plasma by microwaves requires materials with low diaelectric losses and high thermal conductivity. The thermal conductivity can be increased by cooling the windows which lead to the plasma chambre. Experimental investigations with the aim to check the influence of liquid nitrogen (T=70 K) on the cooling of the windows were performed in the temperature region 70 K 2 O 3 , MgAl 2 O 4 and AlN were measured. The thermal conductivity can be calculated using the equation λ=αc p ρ λ=thermal conductivity α=thermal diffusivity c p =specific heat (at constant pressure) ρ=density. Furthermore a theoretical method to calculate the thermal conductivity at low temperatures is presented; this is done by using a model modification of heat transport in electric insulators. As result the influence of intrinsic parameters (crystal structure, interatomar binding, anharmonicity) and extrinsic parameters (point defects, dislocations, boundary areas) upon thermal conductivity of α-Al 2 O 3 , MgAl 2 O 4 and AlN are achieved. (orig.)

Grain refinement of Al wrought alloys with newly developed AlTiC master alloys; Kornfeinung von Al-Knetlegierungen mit neu entwickelten AlTiC-Vorlegierungen

Energy Technology Data Exchange (ETDEWEB)

Schneider, W. [Vereinigte Aluminium-Werke AG, Bonn (Germany). Forschung und Entwicklung

2000-10-01

AlTiC master alloys are a new grain refiner type to produce an equiaxed grain structure of cast extrusion and rolling ingots. These master alloys contain Ti carbides which act as nucleants of the {alpha} solid solution during solidification. The TiC content is lower than the TiB{sub 2} content of the industrial proved AlTiB master alloys. Benefits of the AlTiC master alloys are the low agglomeration tendency of the Ti carbides in the melt and that no Zr poisoning takes place. Despite of the low Ti carbide content the grain refinement performance can be very efficient, if low melt temperatures during casting will be used and as result of this a sufficient constitutional supercooling at the solidification front is achieved. (orig.)

Advanced life support (ALS) instructors experience of ALS education in Western Australia: a qualitative exploratory research study.

Science.gov (United States)

Taplin, John; McConigley, Ruth

2015-04-01

When cardiac arrest occurs, timely competent advanced life support (ALS) interventions by nursing staff can influence patient outcomes. Ongoing ALS education influences maintenance of competency and avoids skill decay. To explore the methods of ALS education delivery for nurses in the workplace; describe the issues relating to maintaining ALS competency; explore ALS competency decay for nurses and develop recommendations for the provision of continuing ALS education. A qualitative exploratory design was used to study ALS education provision in the workplace. Data were collected from ALS nurse experts in Western Australia by face-to-face and phone interviews. Semi-structured interviews were conducted and organised around a set of predetermined questions. Two major themes were identified; the first theme Demand and Supply describes the increasing demand for ALS education for nurses and the challenges with providing timely cost effective traditional face-to-face ALS education. The second theme, Choosing The Best Education Options describes new ways to provide ALS education using emerging technologies. The study suggested that using e-learning methods would assist with educating the maximum amount of nurses in a timely manner and e-learning and teleconferencing offer opportunities to reach nurses in distant locations. Delivering ALS education more frequently than annually would increase skills maintenance and lessen skill decay. Further research is required to explore which blended e-learning model is best suited to ALS education. Copyright © 2014 Elsevier Ltd. All rights reserved.

Al-Qaeda-Syria (AQS): An Al-Qaeda Affiliate Case Study

Science.gov (United States)

2017-10-01

Special Operations/Low Intensity Conflict CT Counterterrorism FF Foreign Fighter FSA Free Syrian Army GEC Global Engagement Center HTS Hay’at...war as an opportunity for the global jihadist movement, an opportunity that paralleled the one Iraq had offered a decade earlier.11 He was initially...Zawahiri’s vision of Al-Qaeda franchises oriented toward winning popular support. When al-Zawahiri published his “General Guidelines for Jihad” in

Mechanochemical synthesis of Cu-Al and methyl orange intercalated Cu-Al layered double hydroxides

International Nuclear Information System (INIS)

Qu, Jun; He, Xiaoman; Chen, Min; Hu, Huimin; Zhang, Qiwu; Liu, Xinzhong

2017-01-01

In this study, a mechanochemical route to synthesize a Cu-Al layered double hydroxide (LDH) and a methyl orange (MO) intercalated one (MO-LDH) was introduced, in which basic cupric carbonate (Cu_2(OH)_2CO_3) and aluminum hydroxide (Al(OH)_3) with Cu/Al molar ratio at 2/1 was first dry ground for 2 h and then agitated in water or methyl orange solution for another 4 h to obtain the LDH and MO-LDH products without any heating operation. The prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetry (TG), Differential scanning calorimetry (DSC) and Scanning electron microscopy (SEM). The products showed high crystallinity phase of Cu-Al and MO intercalated Cu-Al LDH with no evident impurities, proving that the craft introduced here was facile and effective. The new idea can be applied in other fields to produce organic-inorganic composites. - Highlights: • A facile mechanochemical route to synthesize Cu-Al and MO intercalated Cu-Al LDH. • The products possesses high crystalline of LDH phase with no impure phases. • The dry milling process induces the element substitution between the raw materials. • The agitation operation helps the grain growth of LDH.

Mechanochemical synthesis of Cu-Al and methyl orange intercalated Cu-Al layered double hydroxides

Energy Technology Data Exchange (ETDEWEB)

Qu, Jun, E-mail: forsjun@whut.edu.cn [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); He, Xiaoman; Chen, Min; Hu, Huimin [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); Zhang, Qiwu, E-mail: zhangqw@whut.edu.cn [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); Liu, Xinzhong [College of Ecological Environment and Urban Construction, Fujian University of Technology, Fuzhou 350118 China (China)

2017-04-15

In this study, a mechanochemical route to synthesize a Cu-Al layered double hydroxide (LDH) and a methyl orange (MO) intercalated one (MO-LDH) was introduced, in which basic cupric carbonate (Cu{sub 2}(OH){sub 2}CO{sub 3}) and aluminum hydroxide (Al(OH){sub 3}) with Cu/Al molar ratio at 2/1 was first dry ground for 2 h and then agitated in water or methyl orange solution for another 4 h to obtain the LDH and MO-LDH products without any heating operation. The prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetry (TG), Differential scanning calorimetry (DSC) and Scanning electron microscopy (SEM). The products showed high crystallinity phase of Cu-Al and MO intercalated Cu-Al LDH with no evident impurities, proving that the craft introduced here was facile and effective. The new idea can be applied in other fields to produce organic-inorganic composites. - Highlights: • A facile mechanochemical route to synthesize Cu-Al and MO intercalated Cu-Al LDH. • The products possesses high crystalline of LDH phase with no impure phases. • The dry milling process induces the element substitution between the raw materials. • The agitation operation helps the grain growth of LDH.

Superstructure formation in PrNi_2Al_3 and ErPd_2Al_3

International Nuclear Information System (INIS)

Eustermann, Fabian; Hoffmann, Rolf-Dieter; Janka, Oliver; Oldenburg Univ.

2017-01-01

The intermetallic phase ErPd_2Al_3 was obtained by arc-melting of the elements and subsequent annealing for crystal growth. The sample was studied by X-ray diffraction on powders and single crystals. The structure of ErPd_2Al_3 was refined from X-ray diffraction data and revealed a superstructure of PrNi_2Al_3 - a CaCu_5 derivative (P6/m, a=1414.3(1), c=418.87(3) pm wR=0.0820, 1060 F"2 values, 48 variables). The same superstructure was subsequently found for PrNi_2Al_3 (P6/m, a=1407.87(4), c=406.19(2) pm, wR=0.0499, 904 F"2 values, 47 variables). In the crystal structure, the aluminium and transition metal atoms form a polyanionic network according to [T_2Al_3]"δ"-, while rare earth atoms fill cavities within the networks. They are coordinated by six transition metal and twelve aluminum atoms. In contrast to the PrNi_2Al_3 type structure reported so far, two crystallographic independent rare-earth sites are found of which one (1b) is shifted by 1/2 z, causing a distortion in the structure along with a recoloring of the T and Al atoms in the network.

Derecho humano al agua y al saneamiento: derechos estrechamente vinculados al derecho a la vida

OpenAIRE

Fernández Aller, Maria Celia; Luis Romero, Elena de; Guzmán Acha, Cristina

2013-01-01

Los derechos humanos al agua y al saneamiento están íntimamente relacionados con otros derechos esenciales para la vida, como la alimentación o la salud. Su reconocimiento como derechos humanos en 2010 marca un hito importante en el respeto, protección y realización de estos derechos, que se encuentran seriamente vulnerados para una mayoría de población más vulnerable y empobrecida, sobre todo en el ámbito rural. Mucho camino queda aún para conseguir no sólo la disponibilidad de agua y saneam...

Deformation mechanisms of nanotwinned Al

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xinghang [Texas A & M Univ., College Station, TX (United States)

2016-11-10

The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, such as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth twins in

Deformation mechanisms of nanotwinned Al

International Nuclear Information System (INIS)

Zhang, Xinghang

2016-01-01

The objective of this project is to investigate the role of different types of layer interfaces on the formation of high density stacking fault (SF) in Al in Al/fcc multilayers, and understand the corresponding deformation mechanisms of the films. Stacking faults or twins can be intentionally introduced (via growth) into certain fcc metals with low stacking fault energy (such as Cu, Ag and 330 stainless steels) to achieve high strength, high ductility, superior thermal stability and good electrical conductivity. However it is still a major challenge to synthesize these types of defects into metals with high stacking fault energy, such as Al. Although deformation twins have been observed in some nanocrystalline Al powders by low temperature, high strain rate cryomilling or in Al at the edge of crack tip or indentation (with the assistance of high stress intensity factor), these deformation techniques typically introduce twins sporadically and the control of deformation twin density in Al is still not feasible. This project is designed to test the following hypotheses: (1) Certain type of layer interfaces may assist the formation of SF in Al, (2) Al with high density SF may have deformation mechanisms drastically different from those of coarse-grained Al and nanotwinned Cu. To test these hypotheses, we have performed the following tasks: (i) Investigate the influence of layer interfaces, stresses and deposition parameters on the formation and density of SF in Al. (ii) Understand the role of SF on the deformation behavior of Al. In situ nanoindentation experiments will be performed to probe deformation mechanisms in Al. The major findings related to the formation mechanism of twins and mechanical behavior of nanotwinned metals include the followings: 1) Our studies show that nanotwins can be introduced into metals with high stacking fault energy, in drastic contrast to the general anticipation. 2) We show two strategies that can effectively introduce growth twins in

Study on Microstructure and Mechanical Properties of Hypereutectic Al-18Si Alloy Modified with Al-3B.

Science.gov (United States)

Gong, Chunjie; Tu, Hao; Wu, Changjun; Wang, Jianhua; Su, Xuping

2018-03-20

An hypereutectic Al-18Si alloy was modified via an Al-3B master alloy. The effect of the added Al-3B and the modification temperature on the microstructure, tensile fracture morphologies, and mechanical properties of the alloy were investigated using an optical microscope, Image-Pro Plus 6.0, a scanning electron microscope, and a universal testing machine. The results show that the size of the primary Si and its fraction decreased at first, and then increased as an additional amount of Al-3B was added. When the added Al-3B reached 0.2 wt %, the fraction of the primary Si in the Al-18Si alloy decreased with an increase in temperature. Compared with the unmodified Al-18Si alloy, the tensile strength and elongation of the alloy modified at 850 °C with 0.2 wt % Al-3B increased by 25% and 81%, respectively. The tensile fracture of the modified Al-18Si alloy exhibited partial ductile fracture characteristics, but there were more areas with ductile characteristics compared with that of the unmodified Al-18Si alloy.

26Mg(p,n)26Al and 23Na(α,n)26Al reactions

International Nuclear Information System (INIS)

Skelton, R.T.

1985-01-01

Cross sections for the 26 Mg(p,n) 26 Al reaction were measured from threshold at 4.988 MeV to 5.820 MeV. Cross sections for the 23 Na(α,n) 26 Al reaction were measured from threshold at 3.483 MeV to 4.597 MeV. In each case, separate measurements were to the ground state and to the first and second excited states of 26 Al. Cross sections for the inverse reactions were calculated and reaction rate factors relating to the destruction of 26 Al in a supernova environment were determined. Astrophysical implications relating to the observation of live and extinct 26 Al are discussed. Excitation functions for several additional exit channels for the 26 Mg + rho and 23 Na + α reactions are reported

La legionelosis como enfermedad profesional: metodología de valoración

Directory of Open Access Journals (Sweden)

Marta Dorronsoro Dorronsoro

2014-06-01

Full Text Available La Legionella es una enfermedad bacteriana producida por la Legionella Pneumofila, patógeno oportunista que para causar una enfermedad debe estar presente en el lugar (reservorio, debe alcanzar un número suficiente para causar la infección (amplificación y debe pasar al ambiente en estado infectivo (diseminación los focos de contaminación que con mayor frecuencia han sido relacionados con los brotes epidémicos son instalaciones de suministro de agua y de acondicionamiento del aire de los edificios como: circuitos de distribución de agua caliente sanitaria, sistemas de climatización, aguas termales de centros de rehabilitación y recreo, equipos de aerosolterapia. El desarrollo de la enfermedad depende de la exposición al microorganismo patógeno, de la virulencia y de la inmunidad del huésped. La enfermedad puede ser asumida como enfermedad profesional cuando su aparición va ligada a la exposición al agente patógeno, demostrada su presencia en el medio de trabajo y realizando tareas en las que es posible su infección. En este artículo a propósito de un caso se establecen los pasos para la determinación de la contingencia profesional de una enfermedad causada por exposición a agentes biológicos Material y método: Se han revisado hasta mayo de 2013 las siguientes bases de datos bibliográficas: SciELO, y PUBMED. Así como la Bibliografía y documentos de consulta citados en la misma Conclusiones: la neumonía por legionella puede contraerse tanto con carácter ocupacional ligado al trabajo como ambiental. Como toda enfermedad profesional, la diferencia no está en los signos o síntomas de la enfermedad, que no difieren en la neumonía por legionella ni en la clínica ni en la analítica, ni en las pruebas de imagen en cuanto al origen causal, sea este ambiental o de ocio o en la práctica laboral, sino que su adscripción diferencial causal ligada al trabajo viene definida por cumplir con los requisitos legales que dotan a

effect of the parameters of AlN/GaN/AlGaN and AlN/GaN/InAlN heterostructures with a two-dimensional electron gas on their electrical properties and the characteristics of transistors on their basis

Energy Technology Data Exchange (ETDEWEB)

Tsatsulnikov, A. F., E-mail: andrew@beam.ioffe.ru [Russian Academy of Sciences, Submicron Heterostructures for Microelectronics Research and Engineering Center (Russian Federation); Lundin, V. W.; Zavarin, E. E.; Yagovkina, M. A.; Sakharov, A. V. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation); Usov, S. O. [Russian Academy of Sciences, Submicron Heterostructures for Microelectronics Research and Engineering Center (Russian Federation); Zemlyakov, V. E.; Egorkin, V. I. [National Research University of Electronic Technology (MIET) (Russian Federation); Bulashevich, K. A.; Karpov, S. Yu. [“Soft-Impact” Ltd. (Russian Federation); Ustinov, V. M. [Russian Academy of Sciences, Submicron Heterostructures for Microelectronics Research and Engineering Center (Russian Federation)

2016-10-15

The effect of the layer thickness and composition in AlGaN/AlN/GaN and InAlN/AlN/GaN transistor heterostructures with a two-dimensional electron gas on their electrical and the static parameters of test transistors fabricated from such heterostructures are experimentally and theoretically studied. It is shown that the use of an InAlN barrier layer instead of AlGaN results in a more than twofold increase in the carrier concentration in the channel, which leads to a corresponding increase in the saturation current. In situ dielectric-coating deposition on the InAlN/AlN/GaN heterostructure surface during growth process allows an increase in the maximum saturation current and breakdown voltages while retaining high transconductance.

Fabrication and thermal characterization of amorphous and nanocrystalline Al{sub 9}FeNi/Al{sub 3}Ti compound

Energy Technology Data Exchange (ETDEWEB)

Tavoosi, Majid, E-mail: ma.tavoosi@gmail.com

2017-01-15

In this study, the fabrication and structural characterization of amorphous/nanocrystalline Al{sub 9}FeNi/Al{sub 3}Ti phase has been performed. In this regards, milling and annealing processes were applied on Al{sub 80}Fe{sub 10}Ti{sub 5}Ni{sub 5} (at. %) powder mixture for different periods of time. The prepared samples were characterized using X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM) and differential scanning calorimetery (DSC). According to the results, supersaturated solid solution, nanocrystalline Al{sub 9}FeNi/Al{sub 3}Ti (with average crystallite size of about 7 nm) and amorphous phases indicated three different microstructures which can be formed in Al{sub 80}Fe{sub 10}Ti{sub 5}Ni{sub 5} system during milling process. The formed supersaturated solid solution and amorphous phases were unstable and transformed to Al{sub 9}FeNi/Al{sub 3}Ti intermetallic compound during annealing process. It is shown that, Al{sub 9}FeNi phase in Al{sub 9}FeNi/Al{sub 3}Ti intermetallic compound can decompose into Al{sub 3}Ni, Al{sub 13}Fe{sub 4} and liquid phases during a reversible peritectic reaction at 809 °C. - Highlights: • We study the effect of milling process on Al{sub 80}Fe{sub 10}Ti{sub 5}Ni{sub 5} alloy. • We study the effect of annealing on Al{sub 80}Fe{sub 10}Ti{sub 5}Ni{sub 5} supersaturated solid solution phase. • We study the effect of annealing on Al{sub 80}Fe{sub 10}Ti{sub 5}Ni{sub 5} amorphous phase. • We study the thermal behaviour of Al{sub 9}FeNi/Al{sub 3}Ti compound.

Computer aided cooling curve analysis for Al-5Si and Al-11Si alloys ...

African Journals Online (AJOL)

The effect of grain refiner, modifier, and combination of grain refiner cum modifier was studied on Al-5Si and Al-11Si alloys using computer aided cooling curve analysis. For combined grain refinement and modification effect, Al-Ti-B-Sr single master alloy was developed that acted as both grain refiner and modifier.

AL-USRCRN Station Information

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Documentation of United States Alabama Regional Climate Reference Network (AL-USRCRN) installations in 2006. Installations documented are for AL-USRCRN pilot project...

Gd3+-ESR and magnetic susceptibility of GdCu4Al8 and GdMn4Al8

International Nuclear Information System (INIS)

Coldea, R.; Coldea, M.; Pop, I.

1994-01-01

Gd ESR of GdCu 4 Al 8 and GdMn 4 Al 8 and magnetic susceptibility of GdCu 4 Al 8 , GdMn 4 Al 8 , and YMn 4 Al 8 were measured in the temperature range of 290K--460K and 90K--1050K, respectively. The occurrence of the Mn moment in YMn 4 Al 8 and GdMn 4 Al 8 is strongly correlated with the critical value of d∼2.6 angstrom of the Mn-Mn distance below which the Mn moment is not stable. The experimental data for GdMn 4 Al 8 , compared with the data for the isostructural compounds GdCu 4 Al 8 and YMn 4 Al 8 , show that near the critical value of d, the existence of Mn moment depends not only on the value of d, but also on the local magnetic surroundings. It has been revealed that the magnetic character of Mn moment in YMn 4 Al 8 and GdMn 4 Al 8 changes from an itinerant electron type to a local-moment type with increasing temperature

Effect of AlB2-Mg interaction on the mechanical properties of Al-based composites

International Nuclear Information System (INIS)

Calderon, Hermes E.; Hidalgo, Ruth G.I.; Melgarejo, Z. Humberto; Suarez, O. Marcelo

2010-01-01

A series of Al-based composites with a matrix containing 2.5 wt.%Cu and 1 wt.%Mg, and reinforced with Al diborides was manufactured and characterized via microscopy and mechanical testing. The impact resistance of the composites revealed interaction between AlB 2 dispersoids and Mg originally present in the Al matrix. An unexpected increase in the absorbed impact energy of composites with diborides prompted complementary experiments leading to this finding. Hardness tests were correlated to those results and provided further evidence of the interaction between Mg and the dispersoids. Additional energy dispersive spectroscopy (EDS) analysis and X-ray diffraction tests supported with crystal modeling demonstrated that Mg effectively diffused into the AlB 2 crystal producing a doped structure with an Al 1-x Mg x B 2 formula where x lies between 0.08 and 0.15.

Potential skin involvement in ALS: revisiting Charcot's observation - a review of skin abnormalities in ALS.

Science.gov (United States)

Paré, Bastien; Gros-Louis, François

2017-07-26

Amyotrophic lateral sclerosis (ALS) is a neurodegenerative disease affecting motor neurons of the brain and spinal cord, leading to progressive paralysis and death. Interestingly, many skin changes have been reported in ALS patients, but never as yet fully explained. These observations could be due to the common embryonic origin of the skin and neural tissue known as the ectodermal germ layer. Following the first observation in ALS patients' skin by Dr Charcot in the 19th century, in the absence of bedsores unlike other bedridden patients, other morphological and molecular changes have been observed. Thus, the skin could be of interest in the study of ALS and other neurodegenerative diseases. This review summarizes skin changes reported in the literature over the years and discusses about a novel in vitro ALS tissue-engineered skin model, derived from patients, for the study of ALS.

Effects of O in a binary-phase TiAl-Ti3Al alloy: from site occupancy to interfacial energetics

International Nuclear Information System (INIS)

Wei Ye; Xu Huibin; Zhou Hongbo; Zhang Ying; Lu Guanghong

2011-01-01

We have investigated site occupancy and interfacial energetics of a TiAl-Ti 3 Al binary-phase system with O using a first-principles method. Oxygen is shown to energetically occupy the Ti-rich octahedral interstitial site, because O prefers to bond with Ti rather than Al. The occupancy tendency of O in TiAl alloy from high to low is α 2 -Ti 3 Al to the γ-α 2 interface and γ-TiAl. We demonstrate that O can largely affect the mechanical properties of the TiAl-Ti 3 Al system. Oxygen at the TiAl-Ti 3 Al interface reduces both the cleavage energy and the interface energy, and thus weakens the interface strength but strongly stabilizes the TiAl/Ti 3 Al interface with the O 2 molecule as a reference. Consequently, the mechanical property variation of TiAl alloy due to the presence of O not only depends on the number of TiAl/Ti 3 Al interfaces but also is related to the O concentration in the alloy.

A study on wear resistance and microcrack of the Ti{sub 3}Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

Energy Technology Data Exchange (ETDEWEB)

Li Jianing, E-mail: ljnljn1022@163.com [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials (Ministry of Education), Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China); Chen Chuanzhong [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China); Squartini, Tiziano [INFM-Department of Physics, Siena University, Siena 53100 (Italy); He Qingshan [Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, Department of Materials Science, Shandong University, Jing Shi Road 17923, Jinan 250061, Shandong (China)

2010-12-15

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti{sub 3}Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti{sub 3}Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti{sub 3}Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti{sub 3}Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.

Synthesis behavior of nanocrystalline Al-Al2O3 composite during low time mechanical milling process

International Nuclear Information System (INIS)

Alizadeh, Mostafa; Aliabadi, Morteza Mirzaei

2011-01-01

Research highlights: → In the low time milling the effect of Al 2 O 3 amount is investigated → Al 2 O 3 particles are distributed uniformly in the Al matrix → In the low time milling it is possible to produce nanostructured composite powder → Median size and bulk density measurements demonstrate reaching the steady state. - Abstract: In this work, four different volume fractions of Al 2 O 3 (10, 20, 30 and 40 vol.%) were mixed with the fine Al powder and the powder blends were milled for 5 h. Scanning electron microscopy analysis, particle size analysis and bulk density measurements were used to investigate the morphological changes and achieving the steady state conditions. The results showed that increasing the Al 2 O 3 content can provide the steady state particle size in 5 h milling process. It was found that increasing the volume fraction of Al 2 O 3 leads to increasing the uniformity of Al 2 O 3 . Standard deviations of microhardness measurements confirmed this result. The XRD pattern and XRF investigations depicted that increasing the Al 2 O 3 content causes an increase in the crystal defects, micro-strain and Fe contamination during 5 h milling process of nanocrystalline composite powders while the grain size is decreased. To investigate the effect of milling time, Al-30 vol.% Al 2 O 3 (which achieved steady state during 5 h milling process) was milled for 1-4 h. The results depicted that the milling time lower than 5 h, do not achieve to steady state conditions.

Study of the ternary alloy systems Al-Ni-Fe and Al-Cu-Ru with special regard to quasicrystalline phases

International Nuclear Information System (INIS)

Lemmerz, U.

1996-07-01

Two ternary alloy-systems, the Al-Ni-Fe system and the Al-Cu-Ru system were studied with special regard to quasicrystalline phases. Isothermal sections were established in both systems in the stoichiometric area of the quasicrystalline phase. In the Al-Ni-Fe system a new stable decagonal phase was found. Its stoichiometric range is very small around Al 71.6 Ni 23.0 Fe 5.4 . The temperature range in which it is stable lies between 847 and 930 C. The decagonal phase undergoes a eutectoid reaction to the three crystalline phases Al 3 Ni 2 , Al 3 Ni and Al 13 Fe 4 at 847 C. It melts peritectically at 930 C forming Al 13 Fe 4 , Al 3 Ni 2 and a liquid. The investigations in the Al-Cu-Ru system concentrated on the phase equilibria between the icosahedral phase and its neighbouring phases in a temperature range between 600 and 1000 C. The icosahedral phase was observed in the whole temperature range. The investigated stoichiometric area extends down to Al contents of 45%, which allows the fields of existence to be determined for the ternary phases α-AlCuRu, the icosahedral phase and Al 7 Cu 2 Ru. Binary phases were determined down to the upper (high Al content) border of AlRu. No hitherto unknown phase was observed in the investigated area. Rietveld analyses were carried out on α-AlCuRu and Al 7 Cu 2 Ru showing some discrepancies from the α-AlMnSi structure taken as a base for α-AlCuRu and confirming the Al 7 Cu 2 Fe structure for Al 7 Cu 2 Ru. (orig.)

Al-Cu-Li and Al-Mg-Li alloys: Phase composition, texture, and anisotropy of mechanical properties (Review)

Science.gov (United States)

Betsofen, S. Ya.; Antipov, V. V.; Knyazev, M. I.

2016-04-01

The results of studying the phase transformations, the texture formation, and the anisotropy of the mechanical properties in Al-Cu-Li and Al-Mg-Li alloys are generalized. A technique and equations are developed to calculate the amounts of the S1 (Al2MgLi), T1 (Al2CuLi), and δ' (Al3Li) phases. The fraction of the δ' phase in Al-Cu-Li alloys is shown to be significantly higher than in Al-Mg-Li alloys. Therefore, the role of the T1 phase in the hardening of Al-Cu-Li alloys is thought to be overestimated, especially in alloys with more than 1.5% Li. A new model is proposed to describe the hardening of Al-Cu-Li alloys upon aging, and the results obtained with this model agree well with the experimental data. A texture, which is analogous to that in aluminum alloys, is shown to form in sheets semiproducts made of Al-Cu-Li and Al-Mg-Li alloys. The more pronounced anisotropy of the properties of lithium-containing aluminum alloys is caused by a significant fraction of the ordered coherent δ' phase, the deformation mechanism in which differs radically from that in the solid solution.

Pornographie als Metapher

Directory of Open Access Journals (Sweden)

Caroline Schubarth

2010-03-01

Full Text Available In diesem Artikel werden unterschiedliche metaphorische Verwendungen des Pornografiebegriffs und deren Implikationen untersucht. Während die Existenz von Pornografie der feministischen Anti-Porno-Bewegung als Erklärung für die anhaltende Diskriminierung von Frauen in westlichen Gesellschaften dient, nutzen rechtskonservative Kräfte den Pornografievorwurf als Rechtfertigung für die Zensur von als deviant empfundenen Identitäten und sexuellen Praktiken.This article examines different metaphorical uses of the term pornography and the resulting implications. While the existence of pornography for the feminist anti-porno movement serves as factor in the continuing discrimination of women in western societies, conservative powers on the right use the allegation of pornography as a justification for censorship of those identities and sexual practices deemed deviant.

Strain Balanced AlGaN/GaN/AlGaN nanomembrane HEMTs.

Science.gov (United States)

Chang, Tzu-Hsuan; Xiong, Kanglin; Park, Sung Hyun; Yuan, Ge; Ma, Zhenqiang; Han, Jung

2017-07-25

Single crystal semiconductor nanomembranes (NM) are important in various applications such as heterogeneous integration and flexible devices. This paper reports the fabrication of AlGaN/GaN NMs and NM high electron mobility transistors (HEMT). Electrochemical etching is used to slice off single-crystalline AlGaN/GaN layers while preserving their microstructural quality. A double heterostructure design with a symmetric strain profile is employed to ensure minimal residual strain in freestanding NMs after release. The mobility of the two-dimensional electron gas (2DEG), formed by the AlGaN/GaN heterostructure, is noticeably superior to previously reported values of many other NMs. AlGaN/GaN nanomembrane HEMTs are fabricated on SiO 2 and flexible polymeric substrates. Excellent electrical characteristics, including a high ON/OFF ratio and transconductance, suggest that III-Nitrides nanomembranes are capable of supporting high performance applications.

Validated thermodynamic prediction of AlP and eutectic (Si) solidification sequence in Al-Si cast alloys

International Nuclear Information System (INIS)

Liang, S M; Schmid-Fetzer, R

2016-01-01

The eutectic microstructure in hypoeutectic Al-Si cast alloys is strongly influenced by AlP particles which are potent nuclei for the eutectic (Si) phase. The solidification sequence of AlP and (Si) phases is, thus, crucial for the nucleation of eutectic silicon with marked impact on its morphology. This study presents this interdependence between Si- and P-compositions, relevant for Al-Si cast alloys, on the solidification sequence of AlP and (Si). These data are predicted from a series of thermodynamic calculations. The predictions are based on a self-consistent thermodynamic description of the Al-Si-P ternary alloy system developed recently. They are validated by independent experimental studies on microstructure and undercooling in hypoeutectic Al-Si alloys. A constrained Scheil solidification simulation technique is applied to predict the undercooling under clean heterogeneous nucleation conditions, validated by dedicated experimental observations on entrained droplets. These specific undercooling values may be very large and their quantitative dependence on Si and P content of the Al alloy is presented. (paper)

Phase diagrams of aluminium alloys of Al-Cu-Mg, Al-Mg-Si-Cu, and Al-Mg-Li system

International Nuclear Information System (INIS)

Ber, L.B.; Kaputkin, E.Ya.

2001-01-01

Isothermal diagrams of phase transformations (DPT) and temperature-time charts (TTC) of variation of electric conductivity and of mechanical features at tension were plotted following thermal treatment according to the pattern of direct hardening and ageing and according to the pattern of normal aging for D16 commercial alloy, Al-Cu-Mg model alloy of the same system, AD37 commercial alloys of Al-Mg-Si-Cu and 1424 one of Al-Li-Mg system. Phase transformations were studied by means of fluorescence electron microscopy, micro-X-ray spectral analysis, X-ray phase analysis of single crystals and polycrystals and differential scanning calorimetry. For every alloy comparison of TTC and DPT enables to clarity the mechanism of phase composition effect on features and to optimize conditions of hardening cooling and ageing [ru

Superhydrophobic ZnAl double hydroxide nanostructures and ZnO films on Al and glass substrates

Energy Technology Data Exchange (ETDEWEB)

De, Debasis, E-mail: debasis.de@bcrec.ac.in [Electronics and Instrumentation Engineering Department, Dr. B C Roy Engineering College, Durgapur, West Bengal 713206 (India); Sarkar, D.K. [Centre Universitaire de Recherche sur l' Aluminium (CURAL), L' Université du Québec à Chicoutimi, 555 Blvd. Université, Chicoutimi, Saguenay, Québec G7H 2B1 (Canada)

2017-01-01

Superhydrophobic nanostructured ZnAl: layered double hydroxides (LDHs) and ZnO films have been fabricated on Al and glass substrates, respectively, by a simple and cost effective chemical bath deposition technique. Randomly oriented hexagonal patterned of ZnAl: LDHs thin nanoplates are clearly observed on Al-substrate in the scanning electron microscopic images. The average size of these hexagonal plates is ∼4 μm side and ∼30 nm of thickness. While on the glass substrate, a oriented hexagonal patterned ZnO nanorods (height ∼5 μm and 1 μm diameter) are observed and each rod is further decorated throughout the top few nanometers with several nanosteps. At the top of the nanorod, a perfectly hexagonal patterned ZnO surface with ∼250 nm sides is observed. The tendency to form hexagonal morphological features is due to the hexagonal crystal structure of ZnO confirmed from X-ray diffraction patterns and transmission electron microscopy image. The ZnAl: LDHs and/or ZnO coated substrates have been passivated by using stearic acid (SA) molecules. Infrared spectra of passivated ZnAl: LDHs coated substrates confirm the presence of SA. X-ray diffraction pattern also corroborates the results of infrared spectrum. The contact angle of the as prepared samples is zero. The superhydrophobicity is achieved by observing contact angle of ∼161° with a hysteresis of ∼4° for Al-substrate. On the glass substrate, a higher contact angle of ∼168° with a lower hysteresis of ∼3° is observed. A lower surface roughness of ∼4.93 μm is measured on ZnAl: LDHs surface layer on the Al substrate as compare to a higher surface roughness of 6.87 μm measured on ZnO layer on glass substrate. The superhydrophobicity of passivated nanostructured films on two different substrates is observed due to high surface roughness and low surface energy. - Highlights: • ZnAl: layered double hydroxides (LDHs) nanoplates are fabricated on Al substrate. • ZnO nanorods are fabricated on

Formation of Nb3Al in powder processed Nb-Al superconductors

International Nuclear Information System (INIS)

Johnson, P.E.

1987-05-01

In high magnetic fields, the critical current density is strongly dependent on the upper critical field, which is determined primarily by the stoichiometry of the Nb 3 Al. The critical temperature (T/sub c/), like the upper critical field, is considered to be a measure of the ''intrinsic'' quality of the superconductor, indicating the stoichiometry, order, and strain. If the A15 phase is stoichiometric and well ordered, a high T/sub c/ (and high H/sub C 2 /) is expected, regardless of the volume fraction of superconductor. On the other hand, if sigma phase is present with the A15, the resultant composition gradient across the sigma-A15 interface(s) requires that some of the A15 be off-stoichiometric, and therefore that the T/sub c/ (and H/sub C 2 /) be low. Thus the extent of the A15 (Nb 3 Al) reaction and the quality of the A15 formed are interdependent. This work focuses on the factors that control the extent of Nb 3 Al formation in Nb/Al powder wires. The morphology and content of the reacted and unreacted wires are studied in optical, SEM, and TEM micrographs. Critical current density data and its dependence on processing are explained in terms of the unreacted microstructure and its effect on the extent of Nb 3 Al formation. As a method of improving the critical current density, a new variation of the conventional powder process for wire manufacturing is developed and tested

Al-Si/B{sub 4}C composite coatings on Al-Si substrate by plasma spray technique

Energy Technology Data Exchange (ETDEWEB)

Sarikaya, Ozkan [Sakarya University, Faculty of Engineering, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Anik, Selahaddin [Sakarya University, Faculty of Engineering, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Aslanlar, Salim [Sakarya University, Faculty of Technical Education, Department of Mechanical Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Cem Okumus, S. [Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Esentepe Campus, Sakarya 54187 (Turkey); Celik, Erdal [Dokuz Eylul University, Engineering Faculty, Department of Metallurgical and Materials Engineering, Buca, Izmir 35160 (Turkey)]. E-mail: erdal.celik@deu.edu.tr

2007-07-01

Plasma-sprayed coatings of Al-Si/B{sub 4}C have been prepared on Al-Si piston alloys for diesel engine motors. The Al-Si/B{sub 4}C composite powders including 5-25 wt% B{sub 4}C were prepared by mixing and ball-milling processes. These powders were deposited on Al-Si substrate using an atmospheric plasma spray technique. The coatings have been characterised with respect to phase composition, microstructure, microhardness, bond strength and thermal expansion. It was found that Al, Si, B{sub 4}C and Al{sub 2}O{sub 3} phases were determined in the coatings with approximately 600 {mu}m thick by using X-ray diffraction analysis. Scanning electron microscope observation revealed that boron carbide particles were uniformly distributed in composite coatings and B{sub 4}C particles were fully wetted by Al-Si alloy. Also, no reaction products were observed in Al-Si/B{sub 4}C composite coatings. It was found that surface roughness, porosity, bond strength and thermal expansion coefficient of composite coatings decreased with increasing fraction of the boron carbide particle. It was demonstrated that the higher the B{sub 4}C content, the higher the hardness of coatings because the hardness of B{sub 4}C is higher than that of Al-Si.

Fluctuations of charge variance and interaction time for dissipative processes in 27 Al + 27 Al collision

International Nuclear Information System (INIS)

Berceanu, I.; Andronic, A.; Duma, M.

1999-01-01

The systematic studies of dissipative processes in light systems were completed with experiments dedicated to the measurement of the excitation functions in 19 F + 27 Al and 27 Al + 27 Al systems in order to obtain deeper insight on DNS configuration and its time evolution. The excitation function for 19 F + 27 Al system evidenced fluctuations larger than the statistical errors. Large Z and angular cross correlation coefficients supported their non-statistical nature. The energy dependence of second order observables, namely the second moment of the charge distribution and the product ω·τ (ω - the angular velocity of the DNS and τ its mean lifetime) extracted from the angular distributions were studied for 19 F + 27 Al case. In this contribution we are reporting the preliminary results of similar studies performed for 27 Al + 27 Al case. The variance of the charge distribution were obtained fitting the experimental charge distribution with a Gaussian centered on Z = 13 and the product ω·τ was extracted from the angular distributions. The results for 19 F + 27 Al case are confirmed by a preliminary analysis of the data for 27 Al + 27 Al system. The charge variance and ω·τ excitation functions for Z = 11 fragment are represented together with the excitation function of the cross section. One has to mention that the data for 27 Al + 27 Al system were not corrected for particle evaporation processes. The effect of the evaporation corrections on the excitation function was studied using a Monte Carlo simulation. The α particle evaporation was also included and the evaluation of the particle separation energies was made using experimental masses of the fragments. The excitation functions for 27 Al + 27 Al system for primary and secondary fragments were simulated. No structure due to particle evaporation was observed. The correlated fluctuations in σ Z and ω·τ excitation functions support a stochastic exchange of nucleons as the main mechanism for

Unprecedented Al supersaturation in single-phase rock salt structure VAlN films by Al+ subplantation

Science.gov (United States)

Greczynski, G.; Mráz, S.; Hans, M.; Primetzhofer, D.; Lu, J.; Hultman, L.; Schneider, J. M.

2017-05-01

Modern applications of refractory ceramic thin films, predominantly as wear-protective coatings on cutting tools and on components utilized in automotive engines, require a combination of excellent mechanical properties, thermal stability, and oxidation resistance. Conventional design approaches for transition metal nitride coatings with improved thermal and chemical stability are based on alloying with Al. It is well known that the solubility of Al in NaCl-structure transition metal nitrides is limited. Hence, the great challenge is to increase the Al concentration substantially while avoiding precipitation of the thermodynamically favored wurtzite-AlN phase, which is detrimental to mechanical properties. Here, we use VAlN as a model system to illustrate a new concept for the synthesis of metastable single-phase NaCl-structure thin films with the Al content far beyond solubility limits obtained with conventional plasma processes. This supersaturation is achieved by separating the film-forming species in time and energy domains through synchronization of the 70-μs-long pulsed substrate bias with intense periodic fluxes of energetic Al+ metal ions during reactive hybrid high power impulse magnetron sputtering of the Al target and direct current magnetron sputtering of the V target in the Ar/N2 gas mixture. Hereby, Al is subplanted into the cubic VN grains formed by the continuous flux of low-energy V neutrals. We show that Al subplantation enables an unprecedented 42% increase in metastable Al solubility limit in V1-xAlxN, from x = 0.52 obtained with the conventional method to 0.75. The elastic modulus is 325 ± 5 GPa, in excellent agreement with density functional theory calculations, and approximately 50% higher than for corresponding films grown by dc magnetron sputtering. The extension of the presented strategy to other Al-ion-assisted vapor deposition methods or materials systems is straightforward, which opens up the way for producing supersaturated single

Erudición y nostalgia. Al-Hanīn ilà l-awtān en el editor de al-Faraŷ ba,d al-šidda de al-Tanūjī

Directory of Open Access Journals (Sweden)

Garulo, Teresa

2012-06-01

Full Text Available If you want to read a book, a medieval Arabic book, that talks to you about man and his relation with power (God’s power or any kind of worldly power, or about daily life in 10th century Basra or Baghdad, you will probably choose al-Tanūkhī’s works. His Nishwār al-muhādara wa-l-mudhākara or al-Faraj ba,d al-shidda are so widely and so well provided with stories, anecdotes, historical narratives, etc., that you won’t be able to drop it and probably will forget to read the many comments and marginal notes by, Abbūd al-Shāljī, its editor. But if you are wise enough, you will read everything he writes, because you will find in his remarks not only a sustained scholarliness but a fascinating evocation of his life in Irak, mostly in the thirties, with its cooking, manners and customs, and a pang of nostalgia that deserves, I think, at least a note or a friendly comment. In this paper I try to analyse some of his nostalgic memories of Baghdad and its people and places.Uno de los temas clásicos de la literatura árabe, casi desde sus comienzos, es la nostalgia de la tierra natal (al-hanīn ilà l-awtān. Experiencia dolorosa de extrañamiento, que se nutre de las crisis políticas, la nostalgia ha dado lugar a obras que buscan recrear un pasado o unos lugares amados, que sólo la memoria es capaz de recuperar. En este artículo trato de mostrar cómo se articula la nostalgia de Iraq, y, más concretamente, de Bagdad, dentro del aparato crítico de al-Faraŷ ba,da l-šidda de al-Tanūjī (329-384/941-994 (con el apoyo de Nišwār al-muhādara, también de dicho autor en la edición de, Abbūd al-Šālŷī, publicada en los años setenta. La representación que hace al-Tanūjī de la vida cotidiana de la capital abbasí, expresada a través de un lenguaje claro y natural, en el que tienen cabida expresiones populares, suscita en al-Šālŷī toda una serie de remembranzas, sobre todo de sus años juveniles, que se desbordan en sus notas, e

Lou Gehrig's Disease (ALS)

Science.gov (United States)

... disease. Who Gets ALS? Although this disease can strike anyone, ALS is extremely rare in kids. According ... home to provide care that the family cannot handle alone. Living With Lou Gehrig's Disease Living with ...

Difficulties on study of ISM 26Al and a possible new way to nucleosynthesize 26Al-SNIa

International Nuclear Information System (INIS)

Peng Qiuhe

1995-01-01

Some observational results of the 1.809 MeV gamma-ray emitted by decay of the interstellar medium (ISM) 26 Al, which are obtained by spacecraft during (1979-1992) are firstly introduced. Secondly, both Mg-Al chain and Ne-Na cycle of nuclear reactions are discussed. Thirdly, some new experiments of nuclear physics, which are related with the question of the ISM 26 Al(e.g. measurements of the cross section of the nuclear reactions in the MgAl chain and in the NeNa cycle) are introduced. Then, comparing some experiments of nuclear physics, some difficulties confronted on various models responsible for the ISM 26 Al are discussed. The conclusions are: 1) all of hydrostatic H-burning models and all current nova models are hard to provide enough ISM 26 Al to be detected; 2) SN II + SN I b models are promising on responsibility for the half of ISM 26 Al, although current SN II + SN I b models should be improved, besides. Proposal of a new way to nucleosynthesizse 26 Al, 14 N + 16 O→ 26 Al + α, is suggested. SNI a as a possible source of the ISM 26 Al is discussed (63 refs.)

Estimación no paramétrica de variables geoquímicas. Aplicación al As como trazador del Au en mineralizaciones auríferas ligadas a zonas de cizalla

Directory of Open Access Journals (Sweden)

Chica Olmo, M.

1995-04-01

considera la parte de la información que más interesa. Además, tiene un tipo de representaciones gráficas de gran claridad. No obstante, este método tiene el inconveniente de no ser capaz de distinguir entre valores elevados realmente anómalos y valores elevados del fondo de variación regional. A lo largo del trabajo se presentan los resultados de la aplicación de esta técnica sobre un conjunto de datos de exploración minera realizada en un área del NW de España, caracterizada por la presencia de mineralizaciones de oro. La aplicación concreta se ha hecho sobre el As. Este elemento es considerado como un elemento trazador del Au en el área de estudio, al cristalizar éste por desestabilización de arsenopirita. Además, los valores de oro no permiten la realización de ningún tipo de tratamiento numérico. El Au presenta un gran número de valores coincidentes con el límite de detección, así como una serie de datos extremos que hacen que los variogramas indicatrices carezcan de estructuración y no pueda usarse para aplicar el krigeaje de indicatrices. Los resultados de la aplicación del krigeaje de indicatrices sobre el As llevan a localizar una serie de valores elevados situados a lo largo de una estructura geológica de orientación N-S coincidente con una zona de cizalla, considerada como metalotecto de oro en el área. Concretamente, estos puntos se sitúan en los alrededores del afloramiento de unas rocas cataclásticas, que son las litologías en las que aparecen las mineralizaciones de Au por la circulación de fluidos a través de las mismas.

Effect of the interface in laminated composites of Al-1100 and Al-2024

International Nuclear Information System (INIS)

Godefroid, L.B.

1983-01-01

Laminated composites consisting of alternating layers of Al-1100 and Al-2024 were produced by hot rolling, with 45% Al-2024 volume fraction. These composites were subjected to cyclic thermal treatment (various numbers of cycles) and to isothermal treatment (various numbers of cycles) and to isothermal treatment (at peak temperature and for times equivalent to those of the thermal cycles. Microhardness, tensile and fatigue crack arrester modes) were studied in the initial state and after treatments. (E.G.) [pt

AlGaN-Based Deep-Ultraviolet Light Emitting Diodes Fabricated on AlN/sapphire Template

International Nuclear Information System (INIS)

Li-Wen, Sang; Zhi-Xin, Qin; Hao, Fang; Yan-Zhao, Zhang; Tao, Li; Zheng-Yu, Xu; Zhi-Jian, Yang; Bo, Shen; Guo-Yi, Zhang; Shu-Ping, Li; Wei-Huang, Yang; Hang-Yang, Chen; Da-Yi, Liu; Jun-Yong, Kang

2009-01-01

We report on the growth and fabrication of deep ultraviolet (DUV) light emitting diodes (LEDs) on an AlN template which was grown on a pulsed atomic-layer epitaxial buffer layer. Threading dislocation densities in the AlN layer are greatly decreased with the introduction of this buffer layer. The crystalline quality of the AlGaN epilayer is further improved by using a low-temperature GaN interlayer between AlGaN and AlN. Electroluminescences of different DUV-LED devices at a wavelength of between 262 and 317 nm are demonstrated. To improve the hole concentration of p-type AlGaN, Mg-doping with trimethylindium assistance approach is performed. It is found that the serial resistance of DUV-LED decreases and the performance of DUV-LED such as EL properties is improved. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Surface study and thickness control of thin Al2O3 film on Cu-9%Al(111) single crystal

International Nuclear Information System (INIS)

Yamauchi, Yasuhiro; Yoshitake, Michiko; Song Weijie

2004-01-01

We were successful in growing a uniform flat Al 2 O 3 film on the Cu-9%Al(111) surface using the improved cleaning process, low ion energy and short time sputtering. The growth of ultra-thin film of Al 2 O 3 on Cu-9%Al was investigated using Auger electron spectroscopy (AES) and a scanning electron microscope (SEM). The Al 2 O 3 film whose maximum thickness was about 4.0 nm grew uniformly on the Cu-9%Al surface. The Al and O KLL Auger peaks of Al 2 O 3 film shifted toward low kinetic energy, and the shifts were related to Schottky barrier formation and band bending at the Al 2 O 3 /Cu-9%Al interface. The thickness of Al 2 O 3 film on the Cu-9%Al surface was controlled by the oxygen exposure

Reforma sanitaria, equidad y derecho a la salud en Colombia

Directory of Open Access Journals (Sweden)

Hernández Mario

2002-01-01

Full Text Available Se presenta una visión de largo plazo para la valoración de los avances en la equidad y en el derecho a la salud de la reforma del sistema de salud en Colombia. En medio de un sistema político restringido, los actores del campo de la salud en Colombia han construido opciones de tipo individualista que tienden a legalizar las desigualdades ligadas a la capacidad de pago de las personas. A pesar de los complejos mecanismos de regulación establecidos en el nuevo Sistema General de Seguridad Social en Salud, la tendencia apunta hacia una consolidación de las mismas desigualdades tradicionales y al distanciamiento de una garantía plena, equitativa y universal del derecho a la salud.

Consideraciones sobre la evolución de la respuesta inmunitaria Th2 y sus posibles relaciones con parasitosis y alergia

Directory of Open Access Journals (Sweden)

Luis Caraballo

2012-03-01

El desarrollo de este equilibrio debió incluir adaptaciones de ambos organismos y la supervivencia del parásito podría ser el resultado de la adquisición de mecanismos supresores de la respuesta defensiva, la selección de los huéspedes con menor intensidad de la respuesta de tipo 2, o ambas. Esto, a su vez, sugiere que aunque las infecciones helmínticas hayan influido en la conformación de la inmunidad de tipo 2, no han sido una fuerza selectiva importante en el caso particular de la respuesta alérgica que, a su vez, está más ligada a una exagerada respuesta Th2/IgE.   DOI: http://dx.doi.org/10.7705/biomedica.v32i1.419

Saltos del toro y carreras rituales. Deporte femenino y religión en la Antigua Grecia

Directory of Open Access Journals (Sweden)

Fernando García Romero

2015-10-01

Full Text Available La tan repetida afirmación de que en los Juegos Olímpicos antiguos las mujeres no participaban requiere ciertos matices. En estas páginas se estudian las razones por las que el deporte femenino en la antigua Grecia y sus competiciones se mantuvieron siempre muy estrechamente ligadas al contexto cultual y religioso en el que se celebraban. Sin embargo, en época imperial romana, algunos testimonios han hecho que diversos estudiosos se hayan planteado la posibilidad de que hubiera podido desprenderse de alguna manera de su estrechísima vinculación con los rituales iniciáticos y prematrimoniales, y haber tenido cabida incluso en las grandes competiciones deportivas, quizá ya más como espectáculo que como acto de culto.

Pedagogia empresarial: o pedagogo fora da sala de aula

Directory of Open Access Journals (Sweden)

Marcos Eduardo Andrade

2014-07-01

Full Text Available Este trabalho é resultado da pesquisa direcionada para a Pedagogia Empresarial.  Foi uma pesquisa qualitativa com o objetivo de compreender a formação do pedagogo para além da sala de aula, problematizando os novos direcionamentos das Diretrizes Curriculares Nacionais para o Curso de Graduação em Pedagogia. Estudou-se o Curso de Licenciatura em Pedagogia da Universidade do Estado do Mato Grosso Campus Sinop. Neste contexto, de mudanças históricas abrem-se novas perspectivas contemporâneas que abordam a formação do pedagogo e a sua atuação em áreas não diretamente ligada a educação formal.Palavras-chave: pedagogia empresarial; formação de pedagogos; universidade.

Microstructural and mechanical properties of Al-Mg/Al{sub 2}O{sub 3} nanocomposite prepared by mechanical alloying

Energy Technology Data Exchange (ETDEWEB)

Safari, J., E-mail: safari.jam@gmail.com [Department of Material Science and Engineering, Shahid Bahonar University of Kerman, P.O. Box No. 76135-133, Kerman (Iran, Islamic Republic of); Akbari, G.H. [Department of Material Science and Engineering, Shahid Bahonar University of Kerman, P.O. Box No. 76135-133, Kerman (Iran, Islamic Republic of); Research Center for Mineral Industries, Shahid Bahonar University of Kerman, P.O. Box No. 76135-133, Kerman (Iran, Islamic Republic of); Shahbazkhan, A. [Islamic Azad University, Saveh Branch, Saveh (Iran, Islamic Republic of); Delshad Chermahini, M. [Materials and Energy Research Center, Karaj (Iran, Islamic Republic of)

2011-09-29

Highlights: > The presence of Mg has remarkable effects on crystallite size and lattice strain. > The solution of Mg in the Al matrix accelerates the mechanical milling stages. > The microhardness increased in the presence of Mg. > The presence of Mg has significant effect on lattice parameter. > Steady-state situation was occurred in presence of Mg. - Abstract: The effect of milling time on the microstructure and mechanical properties of Al and Al-10 wt.% Mg matrix nanocomposites reinforced with 5 wt.% Al{sub 2}O{sub 3} during mechanical alloying was investigated. Steady-state situation was occurred in Al-10Mg/5Al{sub 2}O{sub 3} nanocomposite after 20 h, due to solution of Mg into Al matrix, while the situation was not observed in Al/5Al{sub 2}O{sub 3} nanocomposite at the same time. For the binary Al-Mg matrix, after 10 h, the predominant phase was an Al-Mg solid solution with an average crystallite size 34 nm. Up to 10 h, the lattice strain increased to about 0.4 and 0.66% for Al and Al-Mg matrix, respectively. The increasing of lattice parameter due to dissolution of Mg atom into Al lattice during milling was significant. By milling for 10 h the dramatic increase in microhardness (155 HV) for Al-Mg matrix nanocomposite was caused by grain refinement and solid solution formation. From 10 to 20 h, slower rate of increasing in microhardness may be attributed to the completion of alloying process, and dynamic and static recovery of powders.

Different magnetic behaviour of the Kondo compounds Al3Ce and Al11Ce3

International Nuclear Information System (INIS)

Benoit, A.; Flouquet, J.; Palleau, J.; Buevoz, J.L.

1979-08-01

Neutron diffraction experiments on the Al 3 Ce and Al 11 Ce 3 compounds have been performed on the multidetector of the I.L.L. high flux reactor. No magnetic structure has been detected on the Al 3 Ce compound down to 20 mK. This confirms the non magnetic ground state of Al 3 Ce. For Al 11 Ce 3 , two magnetic structures have been observed: a ferromagnetic one at 4.2 K and an antiferromagnetic one at 2 K. The antiferromagnetic structure, which corresponds to a propagation vector (0,0,1/3), implies a strong reduction of the magnetic moment of determined sites; this reflects the Kondo character of the compounds

Cast AlSi9Cu4 alloy with hybride strenghtened by Fe{sub x}Al{sub y}-Al{sub 2}O{sub 3} composite powder

Energy Technology Data Exchange (ETDEWEB)

Piatkowski, J [Department of Materials Technology, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice (Poland); Formanek, B, E-mail: jaroslaw.piatkowski@polsl.pl, E-mail: boleslaw.formanek@polsl.pl [Department of Materials Science, Silesian University of Technology, Krasinskiego 8, 40-019 Katowice (Poland)

2011-05-15

The main objective of the study was to develop a technology of dispersion strenghtened hypoeutectic Al-Si alloy. The article presented the materials and technology conception for producing aluminium matrix composite AlSi9Cu4Fe alloy with hybride reinforcement of Al{sub x}Fe{sub y} intermetallic and aluminium oxide powders. Composite powder obtained in mechanical agllomerisation mixture of elemental powders. Changes in the structure were confirmed by TA and ATD thermal analyses plotting the solidification curves, which showed a decrease in temperature T{sub liq} compared to the unmodified alloy and an exothermic effect originating from the crystallisation of eutectics with alloying elements. The examinations carried out by SEM and BSE as well as the determination of local chemical composition by EDX technique have characterised the structure of the alloy as containing some binary Al-Si-Al-Cu and Al-Fe eutectics and multicomponent eutectics.

Optical microcavities and enhanced electroluminescence from electroformed Al-Al{sub 2}O{sub 3}-Ag diodes

Energy Technology Data Exchange (ETDEWEB)

Hickmott, T. W. [Department of Physics, State University of New York at Albany, Albany, New York 12222 (United States)

2013-12-21

Electroluminescence (EL) and electron emission into vacuum (EM) occur when a non-destructive dielectric breakdown of Al-Al{sub 2}O{sub 3}-Ag diodes, electroforming, results in the development of a filamentary region in which current-voltage (I-V) characteristics exhibit voltage-controlled negative resistance. The temperature dependence of I-V curves, EM, and, particularly, EL of Al-Al{sub 2}O{sub 3}-Ag diodes with anodic Al{sub 2}O{sub 3} thicknesses between 12 nm and 30 nm, has been studied. Two filters, a long-pass (LP) filter with transmission of photons with energies less than 3.0 eV and a short-pass (SP) filter with photon transmission between 3.0 and 4.0 eV, have been used to characterize EL. The voltage threshold for EL with the LP filter, V{sub LP}, is ∼1.5 V. V{sub LP} is nearly independent of Al{sub 2}O{sub 3} thickness and of temperature and is 0.3–0.6 V less than the threshold voltage for EL for the SP filter, V{sub SP}. EL intensity is primarily between 1.8 and 3.0 eV when the bias voltage, V{sub S} ≲ 7 V. EL in the thinnest diodes is enhanced compared to EL in thicker diodes. For increasing V{sub S}, for diodes with the smallest Al{sub 2}O{sub 3} thicknesses, there is a maximum EL intensity, L{sub MX}, at a voltage, V{sub LMX}, followed by a decrease to a plateau. L{sub MX} and EL intensity at 4.0 V in the plateau region depend exponentially on Al{sub 2}O{sub 3} thickness. The ratio of L{sub MX} at 295 K for a diode with 12 nm of Al{sub 2}O{sub 3} to L{sub MX} for a diode with 25 nm of Al{sub 2}O{sub 3} is ∼140. The ratio of EL intensity with the LP filter to EL intensity with the SP filter, LP/SP, varies between ∼3 and ∼35; it depends on Al{sub 2}O{sub 3} thickness and V{sub S}. Enhanced EL is attributed to the increase of the spontaneous emission rate of a dipole in a non-resonant optical microcavity. EL photons interact with the Ag and Al films to create surface plasmon polaritons (SPPs) at the metal-Al{sub 2}O

Microstructure and Properties of Fe3Al-Fe3AlC x Composite Prepared by Reactive Liquid Processing

Science.gov (United States)

Verona, Maria Nalu; Setti, Dalmarino; Paredes, Ramón Sigifredo Cortés

2018-04-01

A Fe3Al-Fe3AlC x composite was prepared using reactive liquid processing (RLP) through controlled mixture of carbon steel and aluminum in the liquid state. The microstructure and phases of the composite were assessed using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, optical microscopy, and differential scanning calorimetry. In addition, the density, hardness, microhardness, and elastic modulus were evaluated. The Fe3Al-Fe3AlC x composite consisted of 65 vol pct Fe3Al and 35 vol pct Fe3AlC x ( κ). The κ phase contained 10.62 at. pct C, resulting in the stoichiometry Fe3AlC0.475. The elastic modulus of the Fe3Al-Fe3AlC0.475 composite followed the rule of mixtures. The RLP technique was shown to be capable of producing Fe3Al-Fe3AlC0.475 with a microstructure and properties similar to those achieved using other processing techniques reported in the literature.

Crisis ambiental y sustentabilidad: emergencia de nuevos lenguajes en el escenario administrativo-organizacional

Directory of Open Access Journals (Sweden)

Arias Pineda Andrés Alberto

2011-11-01

Full Text Available Los procesos de industrialización de la postguerra favorecen la confi guración de la sociedad de organizaciones gerenciables. En esta forma societal, la lógica administrativa tradicional se institucionaliza y permea la comprensión de los procesos organizacionales al traducir los lenguajes del mundo-de-la-vida en términos de productividad y competitividad. Esta situación favorece la crisis ambiental en la medida en que legitima una visión mecanicista, lineal y antiecológica de la realidad. En este orden de ideas, la investigación realiza reflexiones epistémicas al pensamiento administrativo tradicional en aras de proponer nuevas lecturas ligadas a nuevas visiones de la realidad, a partir de una revisión bibliográfica focalizada en bases de datos y revistas científicas. Así, emergen los conceptos de sustentabilidad y ciudadanía como fundamentales para la comprensión del rol de las organizaciones empresa en un mundo en crisis.

Grandes empresas mexicanas del calzado: entorno, cultura organizacional y comportamiento tecnológico

Directory of Open Access Journals (Sweden)

Andrés Morales Alquicira

2016-06-01

Full Text Available El objetivo de este trabajo es explicar las diferencias de comportamiento tecnológico entre las dos más grandes empresas similares productoras de calzado en México: Emyco y Flexi. Se asume que los cambios en el comportamiento tecnológico son producto de dos factores: a el entorno económico resultante del tránsito del modelo de industrialización vía sustitución de importaciones (ISI al de industrialización orientada al mercado externo (IOME y, b la cultura organizacional de la empresa caracterizada por sus valores, objetivos, capacidades, formas de operar, aprender y socializar el conocimiento. La metodología se basa en estudios de caso. Se muestra que las diferencias en el comportamiento tecnológico de las empresas analizadas se apoyan en suposiciones culturales ligadas con la valoración que dan a la tecnología que requieren en sus nichos de mercado y, a los procesos y formas de organización para lograr sus objetivos.

Appiah-Adjei et al

African Journals Online (AJOL)

PUBLICATIONS1

ing, sale of automobile spare parts, and metal fabrication. Some of these activities generate huge ... Keywords: Groundwater quality, pollution, waste disposal, Suame, Ghana ... of fertilizers (Chen et al., 2007; Parris, 2011;. Shen et al., 2011), ...

KONSEP MᾹQᾹṢID AL-SYᾹRĪAH MENURUT ṬᾹHᾹ JᾹBIR AL-‘ALWᾹNĪ

Directory of Open Access Journals (Sweden)

Chasnak Najidah

2017-03-01

Full Text Available One discourse which is receiving considerable attention from scholars of Islam is about the objectives of Islamic law (maqasid al-shari'ah. Taha Jabir al-'Alwānī as one reviewer of Maqasid al-shari'ah contemporary formulate the concept of maqasid al-shari'ah different from previous scholars. This article describes the concept of maqasid al-shari'ah by Taha Jabir al-'Alwānī. According to him, there are three levels of hierarchical of Maqasid al-Sharia. The highest value of maqasid al-shari'ah says is what he describes as al-Maqasid al-'ulyā al-Hakimah (intentions of the highest shari'ah and a legal basis, which consists of three main elements, namely al-Tawhid ( Onesess of God, al-Tazkiyah (purification and al-'umrān (prosperity. The position of the second al-shari'ah Maqasid are universal values such as justice, freedom, and equality. While the third position is the formulation of the previous scholars regarding maqasid al-shari'ah consisting of ḍarūriyyat, ḥājiyyāt, and taḥsīniyyāt. In terms of methodological, Taha Jabir al-'Alwānī basing the new system for Maqasid al-syarī'ahnya on the methods of al-jam'u Baina al-qirā'atain, a reading of the two entities: the revelation of God and the universe. With this basis, he argues that the maqasid al-shari'ah formulations are qaṭ'ī, so it can be a reference to the scholars in solving the problems of contemporary law.   [Salah satu diskursus yang mendapat perhatian cukup besar dari para akademisi Islam adalah seputar tujuan-tujuan hukum islam  (maqāṣid al-syarī'ah. Ṭāhā Jābir al-‘Alwānī sebagai salah satu ulama pengkaji maqāṣid asy-syarī’ahkontemporer merumuskan konsep maqāṣid asy-syarī’ahyang berbeda dari ulama sebelumnya. Artikel ini mendeskripsikan konsep maqāṣid asy-syarī’ahmenurut Ṭāhā Jābir al-‘Alwānī. Menurutnya, ada tiga tingkatan hierarkis maqāṣid al-syarī'ah. Nilai tertinggi maqāṣid asy-syarī’ahmenurutnya adalah apa

Measurement of the d({sup 26}Al{sup m},p){sup 27}Al reaction for nuclear astrophysics

Energy Technology Data Exchange (ETDEWEB)

Roeder, B.T.; Trache, L.; Iacob, V.E.; McCleskey, M.; Simmons, E.; Spiridon, A.; Tribble, R.E. [Texas A and M Univ., TX (United States); Davinson, T.; Lotay, G.; Woods, P.J. [University of Edinburgh (United Kingdom); La Cognata, M.; Pizzone, R.G.; Rapisarda, G.G.; Sparta, R.; Spitaleri, C. [Istituto Nazionale di Fisica Nucleare (LNS/INFN), Catania (Italy). Lab. Nazionali del Sud

2012-07-01

Full text: The detection of gamma rays from the decay of the {sup 26}Al ground state in the galaxy gives evidence that nucleosynthesis is occurring in present-day stars, but its origin is not yet clear. This implies that reactions involving {sup 26}Al are important for astrophysical processes. In a recent experiment at the Cyclotron Institute at Texas A and M University, reactions with the ground state and isomeric state of {sup 26}Al were investigated with the Texas A and M-Edinburgh-Catania Silicon detector Array (TECSA). TECSA is a collaborative effort to build a high-efficiency detector Si array useful for measuring reactions of interest for nuclear astrophysics and nuclear structure. The array consists of up to 16 Micron Semiconductor YY1 detectors that are each 300 μm thick. Each detector has 16 annular ring sectors to measure the energy and the scattering angle of the detected particles. Using TECSA, we measured d({sup 26}Al{sup g},p){sup 27}Al and d({sup 26}Al{sup m},p){sup 27}Al with a {sup 26}Al secondary beam prepared in-flight with the MARS spectrometer. First, the composition of the {sup 26}Al beam was determined by measuring the ratio of beta-decays to {sup 26}Al ions produced. It was found that at different spectrometer rigidities, beams of 2/3 isomer to ground state ratio or vice-versa could be obtained. Then, in the second part of the experiment, angular distributions were measured for both reactions at backward angles with TECSA. The protons were measured in TECSA in coincidence with timing signals from the beam detected by a scintillator and with the cyclotron radio-frequency. Details of the experiment and preliminary results from the analysis of the d({sup 26}Al{sup m},p){sup 27}Al and d({sup 26}Al{sup g},p){sup 27}Al data will be presented. They will give information about the proton capture reactions {sup 26}Al{sup m}(p,γ){sup 27}Si and {sup 26}Al{sup g}(p,γ){sup 27}Si taking place in stars. (author)

Khajeh Nasir al-Din al-Tusi’s Role in the Interaction of Triple Paradigms of Islamic Philosophy

Directory of Open Access Journals (Sweden)

r Mohammadzadeh

2013-09-01

Full Text Available Our aim in this article is to investigate Khajeh Nasir`s effective role in emergence, growth and development of triple paradigms of Islamic philosophy, that are, Masha’, Ishraq and al-Hekmah al-Motealiyeh. Thus, first we present a summary of the meaning of “paradigm” and then discuss Tusi`s role in the development of triple paradigms of Islamic philosophy. We believe that, by using an interactive approach, Khajeh Nasir has attained a new approach to understand the paradigms. He is the first thinker in Islamic world who created a constructive and effective interaction between two paradigms of Masha’ and Ishraq, and paved the way for the emergence of al-Hekmah al-Motealiyeh. This can be explained with regard to either the conceptualization of al-Hekmat al-Motealiyeh or epistemological approach. Al-Hekmah Al-Motealiyah was influenced a lot by Tusi.

Characterization of microstructure and mechanical properties of friction stir welded AlMg5- Al_2O_3 nanocomposites

International Nuclear Information System (INIS)

Babu, N. Kishore; Kallip, Kaspar; Leparoux, Marc; AlOgab, Khaled A.; Reddy, G.M.; Talari, M.K.

2016-01-01

In the present study, powder metallurgy processed unmilled AlMg5, milled AlMg5 and milled AlMg5-0.5 vol% Al_2O_3 nanocomposite have been successfully friction stir welded (FSW). The effect of friction stir welding on the evolution of weld microstructures; hardness and tensile properties were studied and discussed in detail. FSW of unmilled AlMg5 resulted in significant grain refinement and strain hardening in the nugget zone induced by the thermo-mechanical processing, thereby increasing the stir zone hardness and tensile strengths to 100 HV and 324 MPa when compared to 80 HV and 300 MPa of base metal, respectively. In contrast, the FSW of milled AlMg5 and milled AlMg5-0.5 vol% Al_2O_3 samples showed a reduction in UTS values to 375 MPa and 401 MPa in the stir zone compared to 401 MPa and 483 MPa of respective base metal values. Transmission electron microscopic (TEM) investigation of weld stir zones revealed the homogenous distribution of Al_4C_3 nanophases in milled AlMg5 and Al_2O_3 nanoparticles in milled AlMg5-0.5 vol% Al_2O_3 samples throughout the aluminium matrix. It was revealed that the pre-stored energy from the prior ball milling and hot pressing processes, higher deformation energy and grain boundary pinning effect due to the presence of reinforcement particles has resulted in a higher recrystallization tendency and retarded grain growth during FSW of milled samples. The welds prepared with milled AlMg5-0.5 vol% Al_2O_3 exhibited higher hardness and tensile strength in the stir zone when compared to all other conditions which was attributed to Hall Petch effect due to fine grain size and Orowan strengthening effect due to Al_2O_3 reinforcements.

Experimental investigation of the Al-Y phase diagram

International Nuclear Information System (INIS)

Liu Shuhong; Du Yong; Xu Honghui; He Cuiyun; Schuster, Julius C.

2006-01-01

The Al-Y phase diagram has been reinvestigated with 16 key alloys over its whole composition range by means of differential thermal analysis, X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive X-ray techniques. The existence of five intermetallic phases, Al 3 Y, Al 2 Y, AlY, Al 2 Y 3 , and AlY 2 , has been confirmed. Al 2 Y and Al 2 Y 3 melt congruently at 1490 ± 2 and 1105 ± 2 deg. C, respectively. Al 3 Y, AlY, and AlY 2 are formed via the peritectic reactions L + Al 2 Y ↔ Al 3 Y at 980 ± 2 deg. C, L + Al 2 Y ↔ AlY at 1138 ± 2 deg. C, and L + Al 2 Y 3 ↔ AlY 2 at 977 ± 2 deg. C, respectively. Three eutectic reactions L ↔ (Al) + Al 3 Y at 637 ± 2 deg. C, L ↔ AlY + Al 2 Y 3 at 1081 ± 2 deg. C, and L ↔ AlY 2 + (αY) at 955 ± 2 deg. C , are observed. The previously reported Al 3 Y 5 , AlY 3 compounds were not found. A revised Al-Y phase diagram is presented mainly based on the present experimental results

The corrosion and mechanical behaviour of Al, FeCrAlY, and CoCrAlY coatings in aggressive environments

NARCIS (Netherlands)

Haanappel, V.A.C.; Haanappel, V.A.C.; Geerdink, Bert; Fransen, T.; Gellings, P.J.

1991-01-01

The mechanical and chemical behaviours of aluminide coatings applied by pack cementation, FeCrAlY coatings applied by plasma spraying and CoCrAlY coatings applied by electrodeposition were studied. The coatings were pretreated for 0.5 h in argon at 1373 K to improve the adhesion and structural

Precipitation and strengthening phenomena in Al-Si-Ge and Al-Cu-Si-Ge alloys

International Nuclear Information System (INIS)

Mitlin, D.; Morris, J.W.; Dahmen, U.; Radmilovic, V.

2000-01-01

The objective of this work was to determine whether Al rich Al-Si-Ge and 2000 type Al-Cu-Si-Ge alloys have sufficient hardness to be useful for structural applications. It is shown that in Al-Si-Ge it is not possible to achieve satisfactory hardness through a conventional heat treatment. This result is explained in terms of sluggish precipitation of the diamond-cubic Si-Ge phase coupled with particle coarsening. However, Al-Cu-Si-Ge displayed a uniquely fast aging response, a high peak hardness and a good stability during prolonged aging. The high hardness of the Cu containing alloy is due to the dense and uniform distribution of fine θ' precipitates (metastable Al 2 Cu) which are heterogeneously nucleated on the Si-Ge particles. High resolution TEM demonstrated that in both alloys all the Si-Ge precipitates start out, and remain multiply twinned throughout the aging treatment. Since the twinned section of the precipitate does not maintain a low index interface with the matrix, the Si-Ge precipitates are equiaxed in morphology. Copyright (2000) AD-TECH - International Foundation for the Advancement of Technology Ltd

Bankole et al (2)

African Journals Online (AJOL)

DELL

Relationships of Clay-filled Channels on the Delta Flanks (Modified after Doust and Omatsola, 1990 and Lawrence et al., 2002). ... and in the Indo-Malaysian area (Germeraad et al.,. 1968). The genus ..... Upper Cretaceous of British Guiana.

Aussprache als motorische Fertigkeit

DEFF Research Database (Denmark)

Bonner, Maria

2013-01-01

Authentische Aussprache gilt im Fremdsprachenunterricht als schwer erreichbares Ziel, fremdsprachlicher Akzent wird als nahezu unvermeidbar gesehen. Weder die Hypothese einer kritischen Periode für den Erwerb einer authentischen Aussprache noch das Konzept der Fossilierung im Sprachlernprozess...

The removal of bisphenol A from aqueous solutions by MIL-53(Al) and mesostructured MIL-53(Al).

Science.gov (United States)

Zhou, Meimei; Wu, Yi-Nan; Qiao, Junlian; Zhang, Jing; McDonald, Amanda; Li, Guangtao; Li, Fengting

2013-09-01

In this work, metal-organic framework MIL-53(Al){Al(OH)[O2C-C6H4-CO2]} and MIL-53(Al)-F127{Al(OH)[O2C-C6H4-CO2]} were synthesized and used as sorbents to remove bisphenol A (BPA) from aqueous system. The sorption kinetics data of BPA were found to be in agreement with the pseudo-second-order model. The equilibrium sorption amounts of BPA on MIL-53(Al) and MIL-53(Al)-F127 reached 329.2±16.5 and 472.7±23.6 mg g(-1), respectively, far more than that of commercial activated carbons (ranging from 129.6 to 263.1 mg g(-1)). Both MIL-53(Al) and MIL-53(Al)-F127 could remove BPA fast from aqueous solutions, and the required contact time to reach equilibrium was approximately 90 min for MIL-53(Al) and 30 min for MIL-53(Al)-F127, respectively. The optimum pH levels for the removal of BPA using MIL-53 (Al) and MIL-53(Al)-F127 were 4 and 6 separately. The optimum temperature for the sorption behavior of BPA on the two sorbents was 20 °C. The results performed show that the resulting products, as one kind of MOFs, can be regarded as a new class of sorbents for water treatment and could find great applications in the fields of environmental water pollution control and resources reuse. Copyright © 2013 Elsevier Inc. All rights reserved.

Hyperfine fields and spin relaxation of Ce in GdAl2 and DyAl2

International Nuclear Information System (INIS)

Waeckelgaard, E.; Karlsson, E.; Lindgren, B.; Mayer, A.

1987-04-01

We have investigated the ferromagnetic state of the cubic intermetallic compounds GdAl 2 and DyAl 2 with the 140 Ce nuclei using DPAC. The local fields of Ce are for the lowest measured temperatures B eff (30 K) = 54(2) T for GdAl 2 and B eff (12.5 K) = 27(1) T for DyAl 2 which are considerably lower than the hyperfine field measured for a free Ce ion (183 T). By introducing a crystal field, of cubic symmetry, a lower hyperfine field is obtained which is in quantitative agreement with the local field of Ce in GdAl 2 . For DyAl 2 an additional effect, represented by a non-magnetic level below the lowest magnetic level, may explain a further reduction of the hyperfine field. Two models relating to a Kondo non-magnetic state of Ce are discussed. Spin relaxation in the paramagnetic state are also studied and compared with observations of the same systems measured with μSR. (authors)

Experimental evidence of structural transition at the crystal-amorphous interphase boundary between Al and Al2O3

International Nuclear Information System (INIS)

Yang, Z.Q.; He, L.L.; Zhao, S.J.; Ye, H.Q.

2002-01-01

High-resolution transmission electron microscopy observations on the structure of the interphase boundary between crystalline Al and amorphous Al 2 O 3 coating reveal that an interfacial melting transition of Al occurs at 833 K, which is distinctly lower than the bulk melting point of Al. The crystalline lattice planes of Al near the interface bend or small segments of crystalline Al deviated from the matrix Al grains are formed. Stand-off dislocations formed at the interphase boundary are also observed. The amorphous Al 2 O 3 coating plays an important role in retaining the evidence for structural transition at high temperature to room temperature, which makes it possible to make experimental observations. (author)

Room-Temperature Quantum Ballistic Transport in Monolithic Ultrascaled Al-Ge-Al Nanowire Heterostructures.

Science.gov (United States)

Sistani, Masiar; Staudinger, Philipp; Greil, Johannes; Holzbauer, Martin; Detz, Hermann; Bertagnolli, Emmerich; Lugstein, Alois

2017-08-09

Conductance quantization at room temperature is a key requirement for the utilizing of ballistic transport for, e.g., high-performance, low-power dissipating transistors operating at the upper limit of "on"-state conductance or multivalued logic gates. So far, studying conductance quantization has been restricted to high-mobility materials at ultralow temperatures and requires sophisticated nanostructure formation techniques and precise lithography for contact formation. Utilizing a thermally induced exchange reaction between single-crystalline Ge nanowires and Al pads, we achieved monolithic Al-Ge-Al NW heterostructures with ultrasmall Ge segments contacted by self-aligned quasi one-dimensional crystalline Al leads. By integration in electrostatically modulated back-gated field-effect transistors, we demonstrate the first experimental observation of room temperature quantum ballistic transport in Ge, favorable for integration in complementary metal-oxide-semiconductor platform technology.

The effectiveness of ERC advanced life support (ALS) provider courses for the retention of ALS knowledge.

Science.gov (United States)

Fischer, Henrik; Strunk, Guido; Neuhold, Stephanie; Kiblböck, Daniel; Trimmel, Helmut; Baubin, Michael; Domanovits, Hans; Maurer, Claudia; Greif, Robert

2012-02-01

Out-of-hospital emergency physicians in Austria need mandatory emergency physician training, followed by biennial refresher courses. Currently, both standardized ERC advanced life support (ALS) provider courses and conventional refresher courses are offered. This study aimed to compare the retention of ALS-knowledge of out-of-hospital emergency physicians depending on whether they had or had not participated in an ERC-ALS provider course since 2005. Participants (n=807) from 19 refresher courses for out-of-hospital emergency physicians answered eight multiple-choice questions (MCQ) about ALS based on the 2005 ERC guidelines. The pass score was 75% correct answers. A multivariate logistic regression analyzed differences in passing scores between those who had previously participated in an ERC-ALS provider course and those who had not. Age, gender, regularity of working as an out-of-hospital emergency physician and the self-reported number of real resuscitation efforts within the last 6months were entered as control variables. Out-of-hospital emergency physicians who had previously attended an ERC-ALS provider course had a significantly higher chance of passing the MCQ test (OR=1.60, p=0.015). Younger age (OR=0.95, pERC-ALS provider course since 2005 had a higher retention of ALS knowledge compared to non-ERC-ALS course participants. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

X-ray study of rapidly cooled ribbons of Al-Cr-Zr and Al-Ni-Y-Cr-Zr alloys

International Nuclear Information System (INIS)

Betsofen, S.Ya.; Osintsev, O.E.; Lutsenko, A.N.; Konkevich, V.Yu.

2002-01-01

One investigated into phase composition, lattice spacing and structure of rapidly cooled 25-200 μm gauge strips made of Al-4,1Cr-3,2Zr and Al-1,5Cr-1,5Zr-4Ni-3Y alloys, wt. %, produced by melt spinning to a water-cooled copper disk. In Al-4,1Cr-3,2Zr alloy one detected intermetallic phases: Al 3 Zr and two Al 86 Cr 14 composition icosahedral phases apart from aluminium solid solution with 4.040-4.043 A lattice spacing. In Al-1,5Cr-1,5Zr-4Ni-3Y alloy one identified two Al 86 Cr 14 icosahedral phases and two AlNiY and Al 3 Y yttrium-containing ones, lattice spacing of aluminium solid solution was equal to 4.052-4.053 A [ru

The Influence of the Asymmetric Arb Process on the Properties of Al-Mg-Al Multi-Layer Sheets / Wpływ Asymetrii W Procesie Arb Na Właściwości Wielowarstwowych Blach Al-Mg-Al

Directory of Open Access Journals (Sweden)

Wierzba A.

2015-12-01

Full Text Available The paper presents the results of the experimental study of the three-layer Al-Mg-Al sheets rolling process by the ARB method. The tests carried out were limited to single-pass symmetric and asymmetric rolling processes. An Al-Mg-Al package with an initial thickness of 4 mm (1-2-1 mm was subjected to the process of rolling with a relative reduction of 50%. To activate the shear band in the strip being deformed, an asymmetry factor of av=2 was applied. From the test results, an increase in the tensile strength of the multi-layer Al-Mg-Al sheets obtained from the asymmetric process was observed. Microhardness tests did not show any significant differences in aluminium layer between respective layers of sheets obtained from the symmetric and the asymmetric process. By contrast, for the magnesium layer, an increase in microhardness from 72 HV to 79 HV could be observed for the asymmetric rolling. The analysis of the produced Al-Mg-Al sheets shows that the good bond between individual layers and grain refinement in the magnesium layer contributed to the obtaining of higher mechanical properties in the multi-layer sheets produced in the asymmetric process compared to the sheets obtained from the symmetric process.

The investigation of Al0.29Ga0.71N/GaN/AlN and AlN/GaN/AlN thin films grown on Si (111) by RF plasma-assisted MBE

Science.gov (United States)

Yusoff, Mohd Zaki Mohd; Mahyuddin, Azzafeerah; Hassan, Zainuriah; Hassan, Haslan Abu; Abdullah, Mat Johar

2012-06-01

Recently, gallium nitride (GaN) and its related compounds involving Al and In have attracted much attention because of their potential to be used as high-efficiency UV light emitting devices, and as high frequency and high power electronic devices. Consequently, the growth and physics of GaN-based materials have attracted remarkable scientific attention. In this work, the growth and characterization of epitaxial Al0.29Ga0.71N and AlN layers grown on Si (111) by RF-plasma assisted molecular beam epitaxy (MBE) are described. The Al mole fraction was derived from the HR-XRD symmetric rocking curve (RC) ω/2θ scans of (0002) plane as x = 0.29. For AlN/GaN/AlN sample, the maximum Raman intensity at 521.53 cm-1 is attributed to crystalline silicon. It was found that the allowed Raman optical phonon mode of GaN, the E1 (high) is clearly visible, which is located at 570.74 cm-1. Photoluminscence (PL) spectrums of both samples have shown sharp and intense band edge emission of GaN without the existence of yellow emission band, showing good crystal quality of the samples have been successfully grown on Si substrate.

Field ion microscopy and 3-D atom probe analysis of Al3Zr particles in 7050 Al alloy

International Nuclear Information System (INIS)

Sha, G.; Cerezo, A.

2004-01-01

Full text: For high strength 7xxx series Al alloys, Zr is an important trace alloy element which is often added to optimise properties, having effects such as refining grain size, inhibiting recrystallization, and improving stress corrosion cracking resistance and quench sensitivity. In addition, it has been reported recently that Zr addition also has a significant influence on early stage ageing behaviour of a 7xxx series Al alloy. Zr equilibrium solubility in solid Al is extremely low. After solution or ageing treatment, most Zr is present as small spherical Ai 3 Zr dispersoids approximately 20 nm in diameter, distributed at grain boundaries as well as within the Al matrix. The crystallographic nature of intermetallic phase Al 3 Zr has been well studied in the literatures. So far, no direct measurement of the chemistry of the Al 3 Zr particles in 7xxx series Al alloys has been published. It is unclear if there is significant Zn, Mg or Cu included in the particles. In this research, 3DAP has been employed for the first time to investigate ionisation behaviour of Al 3 Zr particles and determine the chemistry of the particles in 7050 Al alloy. Using field ion microscopy, the local evaporation radius of the Al 3 Zr particle has been measured to be equivalent to 36 nm for a 10 kV tip, less than the equivalent tip radius for the Al matrix of ∼68 nm. Using the matrix Al evaporation field (19 V/nm) as a reference, this allows the evaporation field of Al 3 Zr to be calculated as 35 V/nm, the same as the field calculated for evaporation of Al as Al 2+ (35 V/nm), and that of Zr as Zr 3+ (35 V/nm). This result is consistent with Al 2+ and Zr 3+ being the main species observed in the mass spectrum during analysis of Al 3 Zr particles. Using 3DAP, the chemical compositions of Al 3 Zr particles are determined to be 64.8∼67.7 at% Al, 23.6∼24.8 at% Zr, 6.9∼9.1 at% Zn, 0.4∼0.7 at% Cu, 0.5∼1.2 at% Mg, with a (Al+Zn)/Zr ratio close to 3. Choice of specimen temperature of

Synthesis and structural transformations of hydrotalcite-like materials Mg-Al and Zn-Al

NARCIS (Netherlands)

Prihod'ko, R.V.; Sychev, M.V.; Astrelin, I.M.; Erdmann, K.; Mangel, A.; Santen, van R.A.

2001-01-01

Mg-Al and Zn-Al hydrotalcite-like layered double hydroxides of various compositions were synthesized and characterized. A detailed comparative analysis of the structure and composition of starting and reconstructed layered double hydroxides was made