WorldWideScience

Sample records for actinium compounds

  1. Extraction of actinium with di-(2-ethylhexyl)phosphoric acid from hydrochloric and nitric acid solutions

    The extraction of actinium with HDEHP from Cl- and NO3- systems has been investigated. It was found that extraction of actinium from HCl solutions is much better than from HNO3 solutions. Stability constants of actinium complexes Ac(X-)+2 with Cl- and NO3- ligands were determined. Our results show that the actinium formed less stable complexes with Cl- than with NO3- ligands. 5 refs., 3 figs., 1 tab. (author)

  2. The sorption of polonium, actinium and protactinium onto geological materials

    This paper describes a combined experimental and modeling program of generic sorption studies to increase confidence in the performance assessment for a potential high-level radioactive waste repository in Japan. The sorption of polonium, actinium and protactinium onto geological materials has been investigated. Sorption of these radioelements onto bentonite, tuff and granodiorite from equilibrated de-ionized water was studied under reducing conditions at room temperature. In addition, the sorption of actinium and protactinium was investigated at 60 C. Thermodynamic chemical modeling was carried out to aid interpretation of the results

  3. Separation of Actinium 227 from the uranium minerals

    The purpose of this work was to separate Actinium 227, whose content is 18%, from the mineral carnotite found in Gomez Chihuahua mountain range in Mexico. The mineral before processing is is pre-concentrated and passed, first through anionic exchange resins, later the eluate obtained is passed through cationic resins. The resins were 20-50 MESH QOWEX and 100-200 MESH 50 X 8-20 in some cased 200-400 MESH AG 50W-X8, 1X8 in other cases. The eluates from the ionic exchange were electrodeposited on stainless steel polished disc cathode and platinum electrode as anode; under a current ODF 10mA for 2.5 to 5 hours and of 100mA for .5 of an hour. it was possible to identify the Actinium 227 by means of its descendents, TH-227 and RA-223, through alpha spectroscopy. Due to the radiochemical purity which the electro deposits were obtained the Actinium 227 was low and was not quantitatively determined. A large majority of the members of the natural radioactive series 3 were identified and even alpha energies reported in the literature with very low percentages of non-identified emissions were observed. We conclude that a more precise study is needed concerning ionic exchange and electrodeposit to obtain an Actinium 227 of radiochemical purity. (Author)

  4. Spectroscopic and computational investigation of actinium coordination chemistry.

    Ferrier, Maryline G; Batista, Enrique R; Berg, John M; Birnbaum, Eva R; Cross, Justin N; Engle, Jonathan W; La Pierre, Henry S; Kozimor, Stosh A; Lezama Pacheco, Juan S; Stein, Benjamin W; Stieber, S Chantal E; Wilson, Justin J

    2016-01-01

    Actinium-225 is a promising isotope for targeted-α therapy. Unfortunately, progress in developing chelators for medicinal applications has been hindered by a limited understanding of actinium chemistry. This knowledge gap is primarily associated with handling actinium, as it is highly radioactive and in short supply. Hence, Ac(III) reactivity is often inferred from the lanthanides and minor actinides (that is, Am, Cm), with limited success. Here we overcome these challenges and characterize actinium in HCl solutions using X-ray absorption spectroscopy and molecular dynamics density functional theory. The Ac-Cl and Ac-OH2O distances are measured to be 2.95(3) and 2.59(3) Å, respectively. The X-ray absorption spectroscopy comparisons between Ac(III) and Am(III) in HCl solutions indicate Ac(III) coordinates more inner-sphere Cl(1-) ligands (3.2±1.1) than Am(III) (0.8±0.3). These results imply diverse reactivity for the +3 actinides and highlight the unexpected and unique Ac(III) chemical behaviour. PMID:27531582

  5. Discovery of the actinium, thorium, protactinium, and uranium isotopes

    Fry, C; Thoennessen, M

    2012-01-01

    Currently, 31 actinium, 31 thorium, 28 protactinium, and 23 uranium isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  6. Production of high-purity radium-223 from legacy actinium-beryllium neutron sources.

    Soderquist, Chuck Z; McNamara, Bruce K; Fisher, Darrell R

    2012-07-01

    Radium-223 is a short-lived alpha-particle-emitting radionuclide with potential applications in cancer treatment. Research to develop new radiopharmaceuticals employing (223)Ra has been hindered by poor availability due to the small quantities of parent actinium-227 available world-wide. The purpose of this study was to develop innovative and cost-effective methods to obtain high-purity (223)Ra from (227)Ac. We obtained (227)Ac from two surplus actinium-beryllium neutron generators. We retrieved the actinium/beryllium buttons from the sources and dissolved them in a sulfuric-nitric acid solution. A crude actinium solid was recovered from the solution by coprecipitation with thorium fluoride, leaving beryllium in solution. The crude actinium was purified to provide about 40 milligrams of actinium nitrate using anion exchange in methanol-water-nitric acid solution. The purified actinium was then used to generate high-purity (223)Ra. We extracted (223)Ra using anion exchange in a methanol-water-nitric acid solution. After the radium was separated, actinium and thorium were then eluted from the column and dried for interim storage. This single-pass separation produces high purity, carrier-free (223)Ra product, and does not disturb the (227)Ac/(227)Th equilibrium. A high purity, carrier-free (227)Th was also obtained from the actinium using a similar anion exchange in nitric acid. These methods enable efficient production of (223)Ra for research and new alpha-emitter radiopharmaceutical development. PMID:22697483

  7. Radium, thorium, and actinium extraction from seawater using an improved manganese-oxide-coated fiber

    Laboratory experiments were conducted to determine the efficiency with which improved manganese-oxide-coated acrylic fibers extract radium, thorium, and actinium from seawater. Tests were made using surface seawater spiked with 227Ac, 227Th and 223Ra. For sample volumes of approximately 30 liters and flow rates up to 0.5 liters per minute, radium and actinium are removed quantitatively. Approximately 80-95% of the thorium is removed under these same conditions. (Auth.)

  8. Production of Actinium-225 via High Energy Proton Induced Spallation of Thorium-232

    The science of cancer research is currently expanding its use of alpha particle emitting radioisotopes. Coupled with the discovery and proliferation of molecular species that seek out and attach to tumors, new therapy and diagnostics are being developed to enhance the treatment of cancer and other diseases. This latest technology is commonly referred to as Alpha Immunotherapy (AIT). Actinium-225/Bismuth-213 is a parent/daughter alpha-emitting radioisotope pair that is highly sought after because of the potential for treating numerous diseases and its ability to be chemically compatible with many known and widely used carrier molecules (such as monoclonal antibodies and proteins/peptides). Unfortunately, the worldwide supply of actinium-225 is limited to about 1,000mCi annually and most of that is currently spoken for, thus limiting the ability of this radioisotope pair to enter into research and subsequently clinical trials. The route proposed herein utilizes high energy protons to produce actinium-225 via spallation of a thorium-232 target. As part of previous R and D efforts carried out at Argonne National Laboratory recently in support of the proposed US FRIB facility, it was shown that a very effective production mechanism for actinium-225 is spallation of thorium-232 by high energy proton beams. The base-line simulation for the production rate of actinium-225 by this reaction mechanism is 8E12 atoms per second at 200 MeV proton beam energy with 50 g/cm2 thorium target and 100 kW beam power. An irradiation of one actinium-225 half-life (10 days) produces ∼100 Ci of actinium-225. For a given beam current the reaction cross section increases slightly with energy to about 400 MeV and then decreases slightly for beam energies in the several GeV regime. The object of this effort is to refine the simulations at proton beam energies of 400 MeV and above up to about 8 GeV. Once completed, the simulations will be experimentally verified using 400 MeV and 8 GeV protons

  9. Production of Actinium-225 via High Energy Proton Induced Spallation of Thorium-232

    Harvey, James T.; Nolen, Jerry; Vandergrift, George; Gomes, Itacil; Kroc, Tom; Horwitz, Phil; McAlister, Dan; Bowers, Del; Sullivan, Vivian; Greene, John

    2011-12-30

    The science of cancer research is currently expanding its use of alpha particle emitting radioisotopes. Coupled with the discovery and proliferation of molecular species that seek out and attach to tumors, new therapy and diagnostics are being developed to enhance the treatment of cancer and other diseases. This latest technology is commonly referred to as Alpha Immunotherapy (AIT). Actinium-225/Bismuth-213 is a parent/daughter alpha-emitting radioisotope pair that is highly sought after because of the potential for treating numerous diseases and its ability to be chemically compatible with many known and widely used carrier molecules (such as monoclonal antibodies and proteins/peptides). Unfortunately, the worldwide supply of actinium-225 is limited to about 1,000mCi annually and most of that is currently spoken for, thus limiting the ability of this radioisotope pair to enter into research and subsequently clinical trials. The route proposed herein utilizes high energy protons to produce actinium-225 via spallation of a thorium-232 target. As part of previous R and D efforts carried out at Argonne National Laboratory recently in support of the proposed US FRIB facility, it was shown that a very effective production mechanism for actinium-225 is spallation of thorium-232 by high energy proton beams. The base-line simulation for the production rate of actinium-225 by this reaction mechanism is 8E12 atoms per second at 200 MeV proton beam energy with 50 g/cm2 thorium target and 100 kW beam power. An irradiation of one actinium-225 half-life (10 days) produces {approx}100 Ci of actinium-225. For a given beam current the reaction cross section increases slightly with energy to about 400 MeV and then decreases slightly for beam energies in the several GeV regime. The object of this effort is to refine the simulations at proton beam energies of 400 MeV and above up to about 8 GeV. Once completed, the simulations will be experimentally verified using 400 MeV and 8 Ge

  10. Neutron-Induced Fission of Actinium-227, Protactinium-231 and Neptunium-237: Mass Distribution

    Results of radiochemical studies on the mass distribution in the neutron-induced fission of actinium-227, protactinium-231 and neptunium-237 have been presented. This work has been carried out as part of a programme to determine the mass distribution in the fission of heavy elements as a function of Z and A. All irradiations have been carried out in the core of the swimming-pool type reactor APSARA with cadmium shielding wherever necessary. Relative yields of several fission product nuclides have been obtained by a method involving a comparison of the fission product activities from the respective targets with those formed from uranium-235 simultaneously irradiated. Thermal-neutron fission yields of uranium-235 have been assumed. These results indicate a predominantly asymmetric mass distribution in all the three cases, and also a distinct though small symmetric peak in the case of actinium-227. (author)

  11. A new method for the determination of low-level actinium-227 in geological samples

    We developed a new method for the determination of 227Ac in geological samples. The method uses extraction chromatographic techniques and alpha-spectrometry and is applicable for a range of natural matrices. Here we report on the procedure and results of the analysis of water (fresh and seawater) and rock samples. Water samples were acidified and rock samples underwent total dissolution via acid leaching. A DGA (N,N,N',N'-tetra-n-octyldiglycolamide) extraction chromatographic column was used for the separation of actinium. The actinium fraction was prepared for alpha spectrometric measurement via cerium fluoride micro-precipitation. Recoveries of actinium in water samples were 80 ± 8 % (number of analyses n = 14) and in rock samples 70 ± 12 % (n = 30). The minimum detectable activities (MDA) were 0.017-0.5 Bq kg-1 for both matrices. Rock sample 227Ac activities ranged from 0.17 to 8.3 Bq kg-1 and water sample activities ranged from below MDA values to 14 Bq kg-1of 227Ac. From the analysis of several standard rock and water samples with the method we found very good agreement between our results and certified values. (author)

  12. Analysis of the gamma spectra of the uranium, actinium, and thorium decay series

    Momeni, M.H.

    1981-09-01

    This report describes the identification of radionuclides in the uranium, actinium, and thorium series by analysis of gamma spectra in the energy range of 40 to 1400 keV. Energies and absolute efficiencies for each gamma line were measured by means of a high-resolution germanium detector and compared with those in the literature. A gamma spectroscopy method, which utilizes an on-line computer for deconvolution of spectra, search and identification of each line, and estimation of activity for each radionuclide, was used to analyze soil and uranium tailings, and ore.

  13. Analysis of the gamma spectra of the uranium, actinium, and thorium decay series

    This report describes the identification of radionuclides in the uranium, actinium, and thorium series by analysis of gamma spectra in the energy range of 40 to 1400 keV. Energies and absolute efficiencies for each gamma line were measured by means of a high-resolution germanium detector and compared with those in the literature. A gamma spectroscopy method, which utilizes an on-line computer for deconvolution of spectra, search and identification of each line, and estimation of activity for each radionuclide, was used to analyze soil and uranium tailings, and ore

  14. In-source laser spectroscopy developments at TRILIS—towards spectroscopy on actinium and scandium

    Resonance Ionization Laser Ion Sources (RILIS) have become a versatile tool for production and study of exotic nuclides at Isotope Separator On-Line (ISOL) facilities such as ISAC at TRIUMF. The recent development and addition of a grating tuned spectroscopy laser to the TRIUMF RILIS solid state laser system allows for wide range spectral scans to investigate atomic structures on short lived isotopes, e.g., those from the element actinium, produced in uranium targets at ISAC. In addition, development of new and improved laser ionization schemes for rare isotope production at ISAC is ongoing. Here spectroscopic studies on bound states, Rydberg states and autoionizing (AI) resonances on scandium using the existing off-line capabilities are reported. These results allowed to identify a suitable ionization scheme for scandium via excitation into an autoionizing state at 58,104 cm − 1 which has subsequently been used for ionization of on-line produced exotic scandium isotopes.

  15. Developments towards in-gas-jet laser spectroscopy studies of actinium isotopes at LISOL

    Raeder, S.; Bastin, B.; Block, M.; Creemers, P.; Delahaye, P.; Ferrer, R.; Fléchard, X.; Franchoo, S.; Ghys, L.; Gaffney, L. P.; Granados, C.; Heinke, R.; Hijazi, L.; Huyse, M.; Kron, T.; Kudryavtsev, Yu.; Laatiaoui, M.; Lecesne, N.; Luton, F.; Moore, I. D.; Martinez, Y.; Mogilevskiy, E.; Naubereit, P.; Piot, J.; Rothe, S.; Savajols, H.; Sels, S.; Sonnenschein, V.; Traykov, E.; Van Beveren, C.; Van den Bergh, P.; Van Duppen, P.; Wendt, K.; Zadvornaya, A.

    2016-06-01

    To study exotic nuclides at the borders of stability with laser ionization and spectroscopy techniques, highest efficiencies in combination with a high spectral resolution are required. These usually opposing requirements are reconciled by applying the in-gas-laser ionization and spectroscopy (IGLIS) technique in the supersonic gas jet produced by a de Laval nozzle installed at the exit of the stopping gas cell. Carrying out laser ionization in the low-temperature and low density supersonic gas jet eliminates pressure broadening, which will significantly improve the spectral resolution. This article presents the required modifications at the Leuven Isotope Separator On-Line (LISOL) facility that are needed for the first on-line studies of in-gas-jet laser spectroscopy. Different geometries for the gas outlet and extraction ion guides have been tested for their performance regarding the acceptance of laser ionized species as well as for their differential pumping capacities. The specifications and performance of the temporarily installed high repetition rate laser system, including a narrow bandwidth injection-locked Ti:sapphire laser, are discussed and first preliminary results on neutron-deficient actinium isotopes are presented indicating the high capability of this novel technique.

  16. Groundwater seepage from the Ranger uranium mine tailings dam: radioisotopes of radium, thorium and actinium. Supervising Scientist report 106

    Monitoring of bores near the Ranger uranium mine tailings dam has revealed deterioration in water quality in several bores since 1983. In a group of bores to the north of the dam, increases have been observed of up to 500 times for sulphate concentrations and of up to 5 times for 226Ra concentrations. Results are presented here of measurements of members of the uranium, thorium and actinium decay series in borewater samples collected between 1985 and 1993. In particular, measurements of all four naturally-occurring radium isotopes have been used in an investigation of the mechanism of radium concentration changes. For the most seepage-affected bores the major findings of the study include: 228Ra/226Ra 223Ra /226Ra and 224Ra/228Ra ratios all increased over the course of the study; barium concentrations show high seasonal variability, being lower in November than May, but strontium concentrations show a steady increase with time. Calculations show that the groundwater is probably saturated with respect to barite but not with respect to celestite or anglesite; sulphide concentrations are low in comparison with sulphate, and are higher in November than in May; and 227Ac concentrations have increased with time, but do not account for the high 223Ra/226Ra ratios. It is concluded on the basis of these observations that increases in Ra isotope concentrations observed in a number of seepage-affected bores arise from increases in salinity leading to desorption of radium from adsorption sites in the vicinity of the bore rather by direct transport of radium from the tailings. Increased salinity is also causing the observed increases in 227Ac and strontium concentrations, while formation of a barite solid phase in the groundwater is causing the removal of some radium from solution. This is the cause of the increasing radium isotope ratios noted above

  17. Multipurpose Compound

    1983-01-01

    Specially formulated derivatives of an unusual basic compound known as Alcide may be the answer to effective treatment and prevention of the disease bovine mastitis, a bacterial inflammation of a cow's mammary gland that results in loss of milk production and in extreme cases, death. Manufactured by Alcide Corporation the Alcide compound has killed all tested bacteria, virus and fungi, shortly after contact, with minimal toxic effects on humans or animals. Alcide Corporation credits the existence of the mastitis treatment/prevention products to assistance provided the company by NERAC, Inc.

  18. Compound odontoma

    Monica Yadav

    2012-01-01

    Full Text Available Odontomas have been extensively reported in the dental literature, and the term refers to tumors of odontogenic origin. Though the exact etiology is still unknown, the postulated causes include: local trauma, infection, inheritance and genetic mutation. The majority of the lesions are asymptomatic; however, may be accompanied with pain and swelling as secondary complaints in some cases. Here, we report a case of a compound odontome in a 14 year old patient.

  19. Magnesium compounds

    Kramer, D.A.

    2006-01-01

    In 2005, seawater and natural brines accounted for 51% of US magnesium compounds production. World magnesia production was estimated to be 14.5 Mt. Most of the production came from China, North Korea, Russia and Turkey. Although no specific production figures are available, Japan and the United States are estimated to account for almost one-half of the world's capacity from seawater and brines.

  20. Intermetallic Compounds

    Takagiwa, Y.; Matsuura, Y.; Kimura, K.

    2014-06-01

    We have focused on the binary narrow-bandgap intermetallic compounds FeGa3 and RuGa3 as thermoelectric materials. Their crystal structure is FeGa3-type (tetragonal, P42/ mnm) with 16 atoms per unit cell. Despite their simple crystal structure, their room temperature thermal conductivity is in the range 4-5-W-m-1-K-1. Both compounds have narrow-bandgaps of approximately 0.3-eV near the Fermi level. Because their Seebeck coefficients are quite large negative values in the range 350-thermoelectric materials both by adjusting the carrier concentration and by reducing the thermal conductivity. Here, we report the effects of doping on the thermoelectric properties of FeGa3 and RuGa3 as n and p-type materials. The dimensionless figure of merit, ZT, was significantly improved by substitution of Sn for Ga in FeGa3 (electron-doping) and by substitution of Zn for Ga in RuGa3 (hole-doping), mainly as a result of optimization of the electronic part, S 2 σ.

  1. Compound odontoma

    José Marcelo Vargas Pinto

    2008-01-01

    Full Text Available Odontomas are the most common types of odontogenic tumors, as they are considered more as a developmental anomaly (hamartoma than as a true neoplasia. The aim of the present study is to describe a clinical case of compound odontoma, analyzing its most commonsigns, its region of location, the decade of life and patient’s gender, disorders that may occur as well as the treatment proposed. In order to attain this objective, the method was description of the present clinical case and bibliographic revision, arriving at the result that the treatment for this type of lesion invariably is surgical removal (enucleation and curettage and the prognosis is excellent. The surgical result was followed up in the post-operative period by radiographic exam, and it was possible to conclude that there was complete cicatrization and tissue repair.

  2. Volatile Organic Compounds (VOCs)

    ... Organic Compounds' Impact on Indoor Air Quality Volatile Organic Compounds' Impact on Indoor Air Quality On this page: ... Exposure Standards or Guidelines Additional Resources Introduction Volatile organic compounds (VOCs) are emitted as gases from certain solids ...

  3. Synthesis Organic Compound

    Rasyid, Herlina; Firdaus; Hariani, Nunuk

    2015-01-01

    Abstract. Synthesis of metil ??-(p-hidroksifenil)akrilic from ??-(p-hidroksifenil)akrilat acid and methanol using Dean Stark Trap method had been done. Synthesis of ths compound intended to form the starting material in the subsequent synthesis of amide???s compound through the formation of ester compound. This synthesis using H2SO4 catalyst and Dean Stark Trap method, some of benzena which is added to remove the water that resulting from the reaction. Synthesis of this compound be held at re...

  4. On labelled compounds nomenclature

    Different approaches of major labelled compounds producers to their nomenclature in technical and commercial documentation are discussed. Some draft options of a standard technical guide document for labelled compounds nomenclature rules are suggested. Such a document after due discussion by the experts will serve to unification of the labelled compounds nomenclature within the frame of the CMEA member-countries co-operation in this field. The suggested options are based on the general recommendations by the International Union of Pure and Applied Chemistry and incorporate some more accurate definitions originating from the labelled compounds production and application experience

  5. NATURAL POLYACETYLENE COMPOUNDS

    D. A. Konovalov

    2014-01-01

    Full Text Available Polyacetylenes (polyynes are compounds which contain two or more triple bonds in its structure. About 2 000 different polyacetylenes and biogenetically related substances were identified in 24 families of higher plants. However, most of these compounds were found in seven families of flowering plants: Apiaceae (Umbelliferae, Araliaceae, Asteraceae (Compositae, Campanulaceae, Olacaceae, Pittosporaceae and Santalaceae. Polyacetylenes are relatively unstable, chemically and biologically active compounds, and present in fungi, microorganisms, marine invertebrates and other organisms except for plants. Acetylenes form distinct specialized group of chemically active natural compounds, which are biosynthesized in plants of unsaturated fatty acids. In addition to widespread aliphatic polyacetylenes thiophenes dithiacyclohexadienes (thiarubrines, thioethers, sulphoxides, sulphones, alkamides, chlorohydrins, lactones, spiroacetal enol ethers, furans, pyrans, tetrahydropyrans, isocoumarins, aromatic acetylenes were also found in plant species. Polyacetylenes are localized in different plant organs, and can be found both individually and as a compound with carbohydrates, terpene, phenolic and other compounds. Many polyacetylenes are found in the composition of the essential oils of plants and it confirms their strongly marked ecological functions. From biological point of view these compounds are often synthesized by plants as toxic or bitter antifeedants, allelopathic compounds, phytoalexins or broadly antibiotic components. Polyynes are strong photosensitizers. They exhibit anti-inflammatory, anti-coagulant, anti-bacterial, antituberculosis, anti-fungal, anti-viral, neuroprotective and neurotoxic activity. Immunostimulatory influence associated with certain allergenicity of some of these substances was established. Therefore, without a doubt polyacetylenes are of interest for the modern pharmacy and medicine.

  6. Stable isotopes labelled compounds

    The catalogue on stable isotopes labelled compounds offers deuterium, nitrogen-15, and multiply labelled compounds. It includes: (1) conditions of sale and delivery, (2) the application of stable isotopes, (3) technical information, (4) product specifications, and (5) the complete delivery programme

  7. NATURAL POLYACETYLENE COMPOUNDS

    D. A. Konovalov

    2014-01-01

    Polyacetylenes (polyynes) are compounds which contain two or more triple bonds in its structure. About 2 000 different polyacetylenes and biogenetically related substances were identified in 24 families of higher plants. However, most of these compounds were found in seven families of flowering plants: Apiaceae (Umbelliferae), Araliaceae, Asteraceae (Compositae), Campanulaceae, Olacaceae, Pittosporaceae and Santalaceae. Polyacetylenes are relatively unstable, chemically and biologically activ...

  8. Nomenclature for labelled compounds

    This paper report on isotopically labelled compounds. The first indexing system for isotopically labelled organic compounds is generally credited to Boughton and named after him. An extension of his principles for designating compounds containing hydrogen isotopes has been part of the Chemical Abstracts Service index nomenclature system for many years. After close on five years labor the IUPAC sponsored Commission on Nomenclature of Organic Chemistry presented in 1979 their findings on Isotopically Modified Compounds. The system codified in their rules provides for recognition of various types of isotopic modification and is therefore of more general applicability. Concurrently the rules for the nomenclature of isotopically modified inorganic compounds are developed. These are to be seen as supplementing and extending the guidelines laid down in the IUPAC Inorganic Nomenclature Rules already published

  9. Biokinetics of radioactive compounds

    Biokinetics of radioactive compounds in the human organism represent the central notion in this work, consisting of a theoretical and an experimental part. The first chapter contains definitions and explanations on the importance of the biokinetics of radioactive compounds in clinical therapy and pharmaceuticals research as well as for assessing radiation exposure and radiation hazards. Chapter 2 describes the bases of the biokinetics of radioactive compounds in the medical and non-medical sector, and biokinetics. Chapter 3 deals with obtaining biokinetics data for radioactive compounds from investigations in animals and man, evaluation of measurements, transferring data obtained by animal experiments to man, and with the variability of biokinetics data. In Chapter 4 the results of comprehensive studies in literature on the biokinetics of radioactive compounds are summarized. They relate to three areas: professional and environmental incorporation of radioactive compounds, use of radioactive pharmaceuticals in therapy and research, and incorporation of radioactive compounds by embryo and fetus in consequence of the uptake of radioactive compounds by the mother. Chapter 5 gives an assessment of radiation hazards from radioactive compounds in connection with occupational radiation exposure and nuclear diagnostics in vivo, and a comparison with other risks. For that purpose the concept of effective dose equivalent is applied in connection with suitable risk coefficients to professional and nuclear-medical radiation exposure. Chapter 6 is dedicated to measurement of the biokinetics of radioactive compounds in man using conventional devices. The object of Chapter 7 is measurement of the biokinetics of radioactive pharmaceuticals in man by means of single photon emission computed tomography. (orig./MG)

  10. Compound composite odontoma

    G Girish

    2016-01-01

    Full Text Available The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas.

  11. Compound composite odontoma.

    Girish, G; Bavle, Radhika M; Singh, Manish Kumar; Prasad, Sahana N

    2016-01-01

    The term odontoma has been used as a descriptor for any tumor of odontogenic origin. It is a growth in which both epithelial and mesenchymal cells exhibits complete differentiation. Odontomas are considered as hamartomas rather than true neoplasm. They are usually discovered on routine radiographic examination. Odontomas, according to the World Health Organization, are classified into complex odontoma and compound odontomas. The present paper reports a case of compound composite odontomas. PMID:27194882

  12. Compounding a Problem?

    Berlin, Joey

    2016-01-01

    Allergist-immunologists say a U.S. Pharmacopeia proposal will mess with an allergy treatment system that's worked for more than a century. The revised standards, if adopted, would remove a key exemption separating allergen extract preparations from the stricter requirements of other compounds. Immunologists say the exemption has allowed them to compound allergen extracts in their own offices, and they've done so safely and effectively millions of times a year. PMID:27175928

  13. Phenolic compounds in flaxseed

    Johnsson, Pernilla

    2004-01-01

    The dietary lignan secoisolariciresinol diglucoside (SDG), present in high concentrations in flaxseed, and its metabolites enterolactone and enterodiol are thought to decrease the risk of hormone dependent cancers, cardiovascular disease and other “welfare” diseases. Flaxseed also contains other biologically active phenolic compounds, such as phenolic acids. The understanding of the nature of these compounds is crucial for their possible exploitation in drugs and functional foods. Until the m...

  14. Phenolic Molding Compounds

    Koizumi, Koji; Charles, Ted; de Keyser, Hendrik

    Phenolic Molding Compounds continue to exhibit well balanced properties such as heat resistance, chemical resistance, dimensional stability, and creep resistance. They are widely applied in electrical, appliance, small engine, commutator, and automotive applications. As the focus of the automotive industry is weight reduction for greater fuel efficiency, phenolic molding compounds become appealing alternatives to metals. Current market volumes and trends, formulation components and its impact on properties, and a review of common manufacturing methods are presented. Molding processes as well as unique advanced techniques such as high temperature molding, live sprue, and injection/compression technique provide additional benefits in improving the performance characterisitics of phenolic molding compounds. Of special interest are descriptions of some of the latest innovations in automotive components, such as the phenolic intake manifold and valve block for dual clutch transmissions. The chapter also characterizes the most recent developments in new materials, including long glass phenolic molding compounds and carbon fiber reinforced phenolic molding compounds exhibiting a 10-20-fold increase in Charpy impact strength when compared to short fiber filled materials. The role of fatigue testing and fatigue fracture behavior presents some insight into long-term reliability and durability of glass-filled phenolic molding compounds. A section on new technology outlines the important factors to consider in modeling phenolic parts by finite element analysis and flow simulation.

  15. The compound ethers of glycerin

    In this chapter of book authors describe several methods of receiving of compound ethers of glycerin. The important technic significance have compound glycerin ether and nitric acid. This compound receive by reaction of glycerin with fuming nitric acid

  16. Compound management beyond efficiency.

    Burr, Ian; Winchester, Toby; Keighley, Wilma; Sewing, Andreas

    2009-06-01

    Codeveloping alongside chemistry and in vitro screening, compound management was one of the first areas in research recognizing the need for efficient processes and workflows. Material management groups have centralized, automated, miniaturized and, importantly, found out what not to do with compounds. While driving down cost and improving quality in storage and processing, researchers still face the challenge of interfacing optimally with changing business processes, in screening groups, and with external vendors and focusing on biologicals in many companies. Here we review our strategy to provide a seamless link between compound acquisition and screening operations and the impact of material management on quality of the downstream processes. Although this is driven in part by new technologies and improved quality control within material management, redefining team structures and roles also drives job satisfaction and motivation in our teams with a subsequent positive impact on cycle times and customer feedback. PMID:19502566

  17. Fluorine-18 labelled compounds

    The work presented in this thesis deals with the problems involved in the adaption of reactor-produced fluorine-18 to the synthesis of 18F-labelled organic fluorine compounds. Several 18F-labelling reagents were prepared and successfully applied. The limitations to the synthetic possibilities of reactor-produced fluoride-18 become manifest in the last part of the thesis. An application to the synthesis of labelled aliphatic fluoro amino acids has appeared to be unsuccessful as yet, although some other synthetic approaches can be indicated. Seven journal articles (for which see the availability note) are used to compose the four chapters and three appendices. The connecting text gives a survey of known 18F-compounds and methods for preparing such compounds. (Auth.)

  18. Compound semiconductor device physics

    Tiwari, Sandip

    2013-01-01

    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those inter

  19. Flavour Compounds in Fungi

    Ravasio, Davide Antonio

    Fungi produce a variety of volatile organic compounds (VOCs) during their primary or secondary metabolism and with a wide range of functions. The main focus of this research work has been put on flavour molecules that are produced during fermentation processes, mainly esters and alcohols derived...

  20. Forecasting of superconducting compounds

    In forecasting new superconducting intermetallic compounds of the A15 and Mo3Se types most promising from the viewpoint of high critical temperature Tsub(c), high critical magnetic fields Hsub(c), and high critical currents and in estimating their transition temperature it is proposed to apply cybernetic methods of computer learning

  1. Chemical compounds in teak

    Fernanda Viana da Silva Leonardo

    2015-09-01

    Full Text Available Quinone compounds are largely generated at extractive fraction of the woods in a complex and variable biological system. The literature has indications for many segments from food industry to pharmaceutical industry. Within the field of industrial use of wood, they are less desirable since they are treated only as incidental substances in production strings of pulp, paper, charcoal, and sawmill. In spite of its small amount, compared to other chemical compounds called essential, these substances have received special attention from researchers revealing a diverse range of offerings to market products textiles, pharmaceuticals, colorants, and other polymers, for which are being tested and employed. Quinones are found in fungi, lichens, and mostly in higher plants. Tectona grandis, usually called teak, is able to biosynthesize anthraquinones, which is a quinone compound, byproduct of secondary metabolism. This species provides wood that is much prized in the furniture sector and can also be exploited for metabolites to supply the market in quinone compounds and commercial development of new technologies, adding value to the plantations of this species within our country.

  2. NATURAL POLYACETYLENE COMPOUNDS

    A. M. Nasukhova

    2014-01-01

    Full Text Available In article the review of the initial stage of researches of natural polyacetylene compounds is resulted. The high reactionary ability leading to fast oxidation and degradation of these compounds, especially at influence of Uf-light, oxygen of air, pH and other factors, has caused the serious difficulties connected with an establishment of structure and studying of their physical and chemical properties. Therefore the greatest quantity of works of this stage is connected with studying of essential oils of plants from families Apiaceae, Araliaceae, Asteraceae, Campanulaceae, Olacaceae, Pittosporaceae and Santalaceae where have been found out, basically, diacetylene compounds. About development of physical and chemical methods of the analysis of possibility of similar researches have considerably extended. More than 2000 polyacetylenes are known today, from them more than 1100 are found out in plants fam. Asteraceae. Revolution in the field of molecular biology has allowed to study processes of biosynthesis of these compounds intensively.

  3. Stabilization of labelled compounds

    This invention concerns a composition including a labelled compound, and the vitamin B 12. This vitamin gives a red colour to the solution and stabilize it radiochemically, allowing to transport the solution at ambient temperature and a storage at 4 degrees celsius. (N.C.). 5 refs

  4. Compound floating pivot micromechanisms

    Garcia, Ernest J.

    2001-04-24

    A new class of tilting micromechanical mechanisms have been developed. These new mechanisms use compound floating pivot structures to attain far greater tilt angles than are practical using other micromechanical techniques. The new mechanisms are also capable of bi-directional tilt about multiple axes.

  5. Fissibility of compound nuclei

    Iwata, Yoritaka

    2012-01-01

    Collisions between $^{248}$Cm and $^{48}$Ca are systematically investigated by time-dependent density functional calculations with evaporation prescription. Depending on the incident energy and impact parameter, fusion, deep-inelastic and fission events are expected to appear. In this paper, a microscopic method of calculating the fissibility of compound nuclei is presented.

  6. Compound semiconductor device modelling

    Miles, Robert

    1993-01-01

    Compound semiconductor devices form the foundation of solid-state microwave and optoelectronic technologies used in many modern communication systems. In common with their low frequency counterparts, these devices are often represented using equivalent circuit models, but it is often necessary to resort to physical models in order to gain insight into the detailed operation of compound semiconductor devices. Many of the earliest physical models were indeed developed to understand the 'unusual' phenomena which occur at high frequencies. Such was the case with the Gunn and IMPATI diodes, which led to an increased interest in using numerical simulation methods. Contemporary devices often have feature sizes so small that they no longer operate within the familiar traditional framework, and hot electron or even quantum­ mechanical models are required. The need for accurate and efficient models suitable for computer aided design has increased with the demand for a wider range of integrated devices for operation at...

  7. Erupted compound odontome

    Shekar S

    2009-01-01

    Full Text Available Odontomas are considered to be hamartomas rather than a true neoplasm. They consist chiefly of enamel and dentin, with variable amount of pulp and cementum when fully developed. They are generally asymptomatic and are included under the benign calcified odontogenic tumors. They are usually discovered on routine radiographic examination. Eruption of an odontoma in the oral cavity is rare. Peripheral compound odontomas arise extraosseously and have a tendency to exfoliate. In this article we are reporting a case of a 15-year-old girl with peripheral compound odontoma, with a single rudimentary tooth-like structure in the mandibular right second molar region, which is about to be exfoliated. Its eruption in the oral cavity and location in the mandibular posterior region is associated with aplasia of the mandibular right second molar, making it an interesting case for reporting.

  8. Endocrine disrupting compounds

    Bøgh, I B; Christensen, P; Dantzer, V;

    2001-01-01

    With the growing concern that environmental chemicals might impair human and animal fertility, it is important to investigate the possible influence of these substances on sexual differentiation and genital development of mammals. Many of these substances are suspected to interfere with endocrine...... of alkylphenols, these are disseminated in the environment with sewage sludge, and domestic animals and humans are likely to be exposed via the food chain. Using the pig as an in vivo model, we studied the effect of intrauterine exposure to tertiary octylphenol (OP) on essential reproductive...... usefulness of in vivo animal or embryo models for the evaluation of possible consequences of human exposure to endocrine disrupting compounds is discussed. Furthermore, possible consequences of exposure to endocrine disrupting compounds for the embryo transfer industry are addressed....

  9. Organic compounds in meteorites

    Lawless, J. G.

    1980-01-01

    Recent studies of carbonaceous chondrites provide evidence that certain organic compounds are indigenous and the result of an abiotic, chemical synthesis. The results of several investigators have established the presence of amino acids and precursors, mono- and dicarboxylic acids, N-heterocycles, and hydrocarbons as well as other compounds. For example, studies of the Murchison and Murray meteorites have revealed the presence of at least 40 amino acids with nearly equal abundances of D and L isomers. The population consists of both protein and nonprotein amino acids including a wide variety of linear, cyclic, and polyfunctional types. Results show a trend of decreasing concentration with increasing carbon number, with the most abundant being glycine (41 n Moles/g). These and other results to be reviewed provide persuasive support for the theory of chemical evolution and provide the only natural evidence for the protobiological subset of molecules from which life on earth may have arisen.

  10. Compound Chondrules fused Cold

    Hubbard, Alexander

    2015-01-01

    About 4-5% of chondrules are compound: two separate chondrules stuck together. This is commonly believed to be the result of the two component chondrules having collided shortly after forming, while still molten. This allows high velocity impacts to result in sticking. However, at T ~ 1100K, the temperature below which chondrules collide as solids (and hence usually bounce), coalescence times for droplets of appropriate composition are measured in tens of seconds. Even at 1025K, at which temperature theory predicts that the chondrules must have collided extremely slowly to have stuck together, the coalescence time scale is still less than an hour. These coalescence time scales are too short for the collision of molten chondrules to explain the observed frequency of compound chondrules. We suggest instead a scenario where chondrules stuck together in slow collisions while fully solid; and the resulting chondrule pair was subsequently briefly heated to a temperature in the range of 900-1025K. In that temperatur...

  11. Hydrogen in compound semiconductors

    Haller, E.E.

    1993-05-01

    Progress in the understanding of hydrogen and its interactions in III/V and II/VI compound semiconductors is reviewed. Donor, acceptor and deep level passivation is well established in III/V compounds based on electrical measurements and on spectroscopic studies. The hydrogen donor levels in GaAs and GaP are estimated to lie near E{sub v}+0.5 eV and E{sub v}+0.3 eV, respectively. Arsenic acceptors have been passivated by hydrogen in CdTe and the very first nitrogen-hydrogen local vibrational model spectra in ZnSe have been reported. This long awaited result may lead to an explanation for the poor activation of nitrogen acceptors in ZnSe grown by techniques which involve high concentrations of hydrogen.

  12. Labelled compounds. (Pt. B)

    Since the end of World War II there has been a tremendous increase in the number of compounds that have been synthesized with radioactive or stable isotopes. They have found application in many diverse fields, so much so, that hardly a single area in pure and applied science has not benefited. Not surprisingly it has been reflected in appearance of related publications. The early proceedings of the Symposia on Advances in Trace Methodology were soon followed by various Euratom sponsored meetings in which methods of preparing and storing labelled compounds featured prominently. In due course a resurgence of interest in stable isotopes, brought about by their greater availability (also lower cost) and partly by development of new techniques such as gas chromatography - mass spectrometry (gc-ms), led to the publication of proceedings of several successful conferences. More recently conferences dealing with the synthesis and applications of isotopes and isotopically labelled compounds have been established on a regular basis. In addition to the proceedings of conferences and journal publications individuals left their mark by producing definitive texts, usually on specific nuclides. Only the classic two volume publication of Murray and Williams (Organic syntheses with isotopes, New York 1985), now over 30 years old and out of print, attempted to do justice to several nuclides. With the large amount of work that has been undertaken since then it seems unlikely that an updated edition could be produced. The alternative strategy was to ask scientists currently active to review specific areas and this is the approach adopted in the present series of monographs. In this way it is intended to cover the broad advances that have been made in the synthesis and applications of isotopes and isotopically labelled compounds in the physical and biomedical sciences. (author). refs.; figs.; tabs

  13. Phenolic compounds in oats

    Skoglund, Maria

    2008-01-01

    This research project examined how to treat raw oat material for oat-based food products in order to sustain or increase the levels of phenolic compounds. The focus was mainly on the avenanthramides, which are potentially health beneficial bioactive components found exclusively in oats. A proposed enzymatic decrease in avenanthramide levels when non heat-treated milled oats are steeped in water was investigated. The decrease was strongly suggested to be caused by a polyphenol oxidase. Althoug...

  14. Compound chondrules fused cold

    Hubbard, Alexander

    2015-07-01

    About 4-5% of chondrules are compound: two separate chondrules stuck together. This is commonly believed to be the result of the two component chondrules having collided shortly after forming, while still molten. This allows high velocity impacts to result in sticking. However, at T ∼ 1100 K, the temperature below which chondrules collide as solids (and hence usually bounce), coalescence times for droplets of appropriate composition are measured in tens of seconds. Even at 1025 K, at which temperature theory predicts that the chondrules must have collided extremely slowly to have stuck together, the coalescence time scale is still less than an hour. These coalescence time scales are too short for the collision of molten chondrules to explain the observed frequency of compound chondrules. We suggest instead a scenario where chondrules stuck together in slow collisions while fully solid; and the resulting chondrule pair was subsequently briefly heated to a temperature in the range of 900-1025 K. In that temperature window the coalescence time is finite but long, covering a span of hours to a decade. This is particularly interesting because those temperatures are precisely the critical window for thermally ionized MRI activity, so compound chondrules provide a possible probe into that vital regime.

  15. Compound Wiretap Channels

    Shlomo Shamai (Shitz

    2009-01-01

    Full Text Available This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom (s.d.o.f. are derived for the degraded case with one receiver. Schemes to achieve the s.d.o.f. for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable s.d.o.f. is given for the general case.

  16. Compound Wiretap Channels

    Kramer Gerhard

    2009-01-01

    Full Text Available Abstract This paper considers the compound wiretap channel, which generalizes Wyner's wiretap model to allow the channels to the (legitimate receiver and to the eavesdropper to take a number of possible states. No matter which states occur, the transmitter guarantees that the receiver decodes its message and that the eavesdropper is kept in full ignorance about the message. The compound wiretap channel can also be viewed as a multicast channel with multiple eavesdroppers, in which the transmitter sends information to all receivers and keeps the information secret from all eavesdroppers. For the discrete memoryless channel, lower and upper bounds on the secrecy capacity are derived. The secrecy capacity is established for the degraded channel and the semideterministic channel with one receiver. The parallel Gaussian channel is further studied. The secrecy capacity and the secrecy degree of freedom ( are derived for the degraded case with one receiver. Schemes to achieve the for the case with two receivers and two eavesdroppers are constructed to demonstrate the necessity of a prefix channel in encoder design. Finally, the multi-antenna (i.e., MIMO compound wiretap channel is studied. The secrecy capacity is established for the degraded case and an achievable is given for the general case.

  17. Light metal compound casting

    Konrad; J.; M.; PAPIS; Joerg; F.; LOEFFLER; Peter; J.; UGGOWITZER

    2009-01-01

    Compound casting’simplifies joining processes by directly casting a metallic melt onto a solid metal substrate. A continuously metallurgic transition is very important for industrial applications, such as joint structures of spaceframe constructions in transport industry. In this project, ‘compound casting’ of light metals is investigated, aiming at weight-saving. The substrate used is a wrought aluminium alloy of type AA5xxx, containing magnesium as main alloying element. The melts are aluminium alloys, containing various alloying elements (Cu, Si, Zn), and magnesium. By replacing the natural oxygen layer with a zinc layer, the inherent wetting difficulties were avoided, and compounds with flawless interfaces were successfully produced (no contraction defects, cracks or oxides). Electron microscopy and EDX investigations as well as optical micrographs of the interfacial areas revealed their continu- ously metallic constitution. Diffusion of alloying elements leads to heat-treatable microstructures in the vicinity of the joining interfaces in Al-Al couples. This permits significant variability of mechanical properties. Without significantly cutting down on wettability, the formation of low-melting intermetallic phases (Al3Mg2 and Al12Mg17 IMPs) at the interface of Al-Mg couples was avoided by applying a protective coating to the substrate.

  18. Light metal compound casting

    Konrad J.M.PAPIS; Joerg F.LOEFFLER; Peter J.UGGOWITZER

    2009-01-01

    'Compound casting'simplifies joining processes by directly casting a metallic melt onto a solid metal substrate. A continuously metallurgic transition is very important for industrial applications, such as joint structures of spaceframe constructions in transport industry. In this project, 'compound casting' of light metals is investigated, aiming at weight-saving. The substrate used is a wrought aluminium alloy of type AA5xxx, containing magnesium as main alloying element. The melts are aluminium alloys, containing various alloying elements (Cu, Si, Zn), and magnesium. By replacing the natural oxygen layer with a zinc layer, the inherent wetting difficulties were avoided, and compounds with flawless interfaces were successfully produced (no contraction defects, cracks or oxides). Electron microscopy and EDX investigations as well as optical micrographs of the interfacial areas revealed their continu-ously metallic constitution. Diffusion of alloying elements leads to heat-treatable microstructures in the vicinity of the joining interfaces in Al-Al couples. This permits significant variability of mechanical properties. Without significantly cutting down on wettability, the formation of low-melting intermetallic phases (Al3Mg2 and AI12Mg17 IMPs) at the interface of Al-Mg couples was avoided by applying a protec-tive coating to the substrate.

  19. Toxic compounds in honey.

    Islam, Md Nazmul; Khalil, Md Ibrahim; Islam, Md Asiful; Gan, Siew Hua

    2014-07-01

    There is a wealth of information about the nutritional and medicinal properties of honey. However, honey may contain compounds that may lead to toxicity. A compound not naturally present in honey, named 5-hydroxymethylfurfural (HMF), may be formed during the heating or preservation processes of honey. HMF has gained much interest, as it is commonly detected in honey samples, especially samples that have been stored for a long time. HMF is a compound that may be mutagenic, carcinogenic and cytotoxic. It has also been reported that honey can be contaminated with heavy metals such as lead, arsenic, mercury and cadmium. Honey produced from the nectar of Rhododendron ponticum contains alkaloids that can be poisonous to humans, while honey collected from Andromeda flowers contains grayanotoxins, which can cause paralysis of limbs in humans and eventually leads to death. In addition, Melicope ternata and Coriaria arborea from New Zealand produce toxic honey that can be fatal. There are reports that honey is not safe to be consumed when it is collected from Datura plants (from Mexico and Hungary), belladonna flowers and Hyoscamus niger plants (from Hungary), Serjania lethalis (from Brazil), Gelsemium sempervirens (from the American Southwest), Kalmia latifolia, Tripetalia paniculata and Ledum palustre. Although the symptoms of poisoning due to honey consumption may differ depending on the source of toxins, most common symptoms generally include dizziness, nausea, vomiting, convulsions, headache, palpitations or even death. It has been suggested that honey should not be considered a completely safe food. PMID:24214851

  20. Morphology of uranium compounds

    Uranium metal is being used as nuclear fuel for Indian Research Reactors. During production of U metal various intermediate compounds of uranium are being processed. Physical, chemical properties of these compounds are important in overall processing rate and conversion determination. As no systematic data on morphology of these compounds were available, study was conducted to record the morphology of various U-compounds which are important in production of ceramic and metallic U-fuel for reactors. Most important intermediates were found to be ammonium diuranate (ADU) and uranium oxide (UO3/UO2). Morphology of these powders controls their flowability required for further material movement through different equipment, surface area required for chemical reactivity of powder, carryover losses occurred during gas solid counter current reaction and tap density required for effective capacity determination. ADU particle basically consists of primary platelets of 250-500 nm width and of 500-1000 nm length. These primary platelets form primary agglomerates. These agglomerates look like woollen balls or balls or cauliflower and primary agglomerates are also connected with each other to form secondary agglomerates. The basic morphology of ADU is maintained in UO3 even after calcination at high temperature. Pores are generated at the surface of platelet of UO3 due to release of gaseous reaction products during calcination. As temperature increases more pores are generated and sintering also starts. Specific surface area of UO3, produced by the calcination of ammonium di-urinate is generally a function of two competing processes: generation of surface area due to generation of pores because of the evolution of gaseous products (NH3, H2O vapour) and the loss of surfaces due to sintering. As a results surface area increases with calcination temperature due to generation of pores and then reduces. It has also been observed that morphology of the compounds are very much processing

  1. Xenobiotic organic compounds in wastewater

    Eriksson, Eva; Baun, Anders; Henze, Mogens; Ledin, Anna

    Information regarding the contents of xenobiotic organic compounds (XOCs) in wastewater is limited, but it has been shown that at least 900 different compounds / compound groups could potentially be present in grey wastewater. Analyses of Danish grey wastewater revealed the presence of several...... hundred of XOCs, among them mainly originating from hygiene products: chlorophenols, detergents and phthalates. Several compounds not deriving from hygiene products were also identified e.g. flame-retardants and drugs. A environmental hazard identification showed that a large number of compounds with high...... aquatic toxicity were present and that data for environmental fate could only be retrieved for about half of the compounds....

  2. Nomenclature on an inorganic compound

    This book contains eleven chapters : which mention nomenclature of an inorganic compound with introduction and general principle on nomenclature of compound. It gives the description of grammar for nomenclature such as brackets, diagonal line, asterisk, and affix, element, atom and groups of atom, chemical formula, naming by stoichiometry, solid, neutral molecule compound, ion, a substituent, radical and name of salt, oxo acid and anion on introduction and definition of oxo acid, coordination compound like symbol of stereochemistry , boron and hydrogen compound and related compound.

  3. Xenobiotic organic compounds in wastewater

    Eriksson, Eva; Baun, Anders; Henze, Mogens;

    2002-01-01

    Information regarding the contents of xenobiotic organic compounds (XOCs) in wastewater is limited, but it has been shown that at least 900 different compounds / compound groups could potentially be present in grey wastewater. Analyses of Danish grey wastewater revealed the presence of several...... hundred of XOCs, among them mainly originating from hygiene products: chlorophenols, detergents and phthalates. Several compounds not deriving from hygiene products were also identified e.g. flame-retardants and drugs. A environmental hazard identification showed that a large number of compounds with high...... aquatic toxicity were present and that data for environmental fate could only be retrieved for about half of the compounds....

  4. Offset Compound Gear Drive

    Stevens, Mark A.; Handschuh, Robert F.; Lewicki, David G.

    2010-01-01

    The Offset Compound Gear Drive is an in-line, discrete, two-speed device utilizing a special offset compound gear that has both an internal tooth configuration on the input end and external tooth configuration on the output end, thus allowing it to mesh in series, simultaneously, with both a smaller external tooth input gear and a larger internal tooth output gear. This unique geometry and offset axis permits the compound gear to mesh with the smaller diameter input gear and the larger diameter output gear, both of which are on the same central, or primary, centerline. This configuration results in a compact in-line reduction gear set consisting of fewer gears and bearings than a conventional planetary gear train. Switching between the two output ratios is accomplished through a main control clutch and sprag. Power flow to the above is transmitted through concentric power paths. Low-speed operation is accomplished in two meshes. For the purpose of illustrating the low-speed output operation, the following example pitch diameters are given. A 5.0 pitch diameter (PD) input gear to 7.50 PD (internal tooth) intermediate gear (0.667 reduction mesh), and a 7.50 PD (external tooth) intermediate gear to a 10.00 PD output gear (0.750 reduction mesh). Note that it is not required that the intermediate gears on the offset axis be of the same diameter. For this example, the resultant low-speed ratio is 2:1 (output speed = 0.500; product of stage one 0.667 reduction and stage two 0.750 stage reduction). The design is not restricted to the example pitch diameters, or output ratio. From the output gear, power is transmitted through a hollow drive shaft, which, in turn, drives a sprag during which time the main clutch is disengaged.

  5. Compound semiconductor integrated circuits

    Vu, Tho T

    2003-01-01

    This is the book version of a special issue of the International Journal of High Speed Electronics and Systems , reviewing recent work in the field of compound semiconductor integrated circuits. There are fourteen invited papers covering a wide range of applications, frequencies and materials. These papers deal with digital, analog, microwave and millimeter-wave technologies, devices and integrated circuits for wireline fiber-optic lightwave transmissions, and wireless radio-frequency microwave and millimeter-wave communications. In each case, the market is young and experiencing rapid growth

  6. Titanium alkoxide compound

    Boyle, Timothy J.

    2007-08-14

    A titanium alkoxide composition is provided, as represented by the chemical formula (OC.sub.6H.sub.5N).sub.2Ti(OC.sub.6H.sub.5NH.sub.2).sub.2. As prepared, the compound is a crystalline substance with a hexavalent titanium atom bonded to two OC.sub.6H.sub.5NH.sub.2 groups and two OC.sub.6H.sub.5N groups with a theoretical molecular weight of 480.38, comprising 60.01% C, 5.04% H and 11.66% N.

  7. Catalytic properties of niobium compounds

    The catalytic activity and selectivity of niobium compounds including oxides, salts, organometallic compounds and others are outlined. The application of these compounds as catalysts to diversified reactions is reported. The nature and action of niobium catalysts are characteristic and sometimes anomalous, suggesting the necessity of basic research and the potential use as catalysts for important processes in the chemical industry. (Author)

  8. Goldenphilicity: Luminescent gold compounds

    In the solids and molecules different types of bonds are presented depending on the involved atoms, covalent bonds are common among elements of open shell, where more bond orbitals are filled than anti bond orbitals. It is expected that ionic bonds among closed shell atoms which have charges of opposite sign. Bonds type Van der Waals are presented among molecules which have a bipolar moment. It would not be expected bonds among zero charge species, or more generally with the same nominal charge and in any case the attractive forces would be very small. In fact it is expected that two metallic cations to be repelled each other. There recently is evidence that in organic or organometallic compounds could exist attractive interactions between two cations of the d8 -d10 -s2 families. These bonds are weak but stronger than those of Van der Waals. They are compared with the hydrogen bonds. In this work it was reviewed some examples in which the goldenphilicity plays an important role in the luminescence that the gold complexes present. Examples of mono, bi and trinuclear and the structures that these organometallic compounds could take are examined. (Author)

  9. Semiconducting III-V compounds

    Hilsum, C; Henisch, Heinz R

    1961-01-01

    Semiconducting III-V Compounds deals with the properties of III-V compounds as a family of semiconducting crystals and relates these compounds to the monatomic semiconductors silicon and germanium. Emphasis is placed on physical processes that are peculiar to III-V compounds, particularly those that combine boron, aluminum, gallium, and indium with phosphorus, arsenic, and antimony (for example, indium antimonide, indium arsenide, gallium antimonide, and gallium arsenide).Comprised of eight chapters, this book begins with an assessment of the crystal structure and binding of III-V compounds, f

  10. Volatile organic compounds

    The goal is: Not more emission of volatile organic compounds (VOCs) than necessary. The items discussed in this presentation are the VOCs, how to calculate emission of VOCs, how to reduce or avoid them, and different recovery processes. The largest source of Norwegian emissions of non methane VOCs (NMVOCs) is offshore loading of raw petroleum. Emissions of VOCs should be reduced mainly for two reasons: (1) on sunny days NMVOCs may react with NOx to form ozon and smog close to the surface, (2) ozone and smog close to the surface may be harmful to plants and animals, and they are hazardous to human health. As for the calculation of VOC emissions, the VOCON project will release the calculation program HCGASS in 1999. This project is a cooperative project headed by SINTEF/Marintek

  11. Synthesis of labeled compounds

    Intermediate compounds labeled with 13C included methane, sodium cyanide, methanol, ethanol, and acetonitrile. A new method for synthesizing 15N-labeled 4-ethylsulfonyl-1-naphthalene-sulfonamide was developed. Studies were conducted on pathways to oleic-1-13C acid and a second pathway investigated was based on carbonation of 8-heptadecynylmagnesium bromide with CO2 to prepare sterolic acid. Biosynthetic preparations included glucose-13C from starch isolated from tobacco leaves following photosynthetic incubation with 13CO2 and galactose-13C from galactosylglycerol-13C from kelp. Research on growth of organisms emphasized photosynthetic growth of algae in which all cellular carbon is labeled. Preliminary experiments were performed to optimize the growth of Escherichia coli on sodium acetate-13C

  12. Microoptical telescope compound eye.

    Duparré, Jacques; Schreiber, Peter; Matthes, André; Pshenay-Severin, Ekaterina; Bräuer, Andreas; Tünnermann, Andreas; Völkel, Reinhard; Eisner, Martin; Scharf, Toralf

    2005-02-01

    A new optical concept for compact digital image acquisition devices with large field of view is developed and proofed experimentally. Archetypes for the imaging system are compound eyes of small insects and the Gabor-Superlens. A paraxial 3x3 matrix formalism is used to describe the telescope arrangement of three microlens arrays with different pitch to find first order parameters of the imaging system. A 2mm thin imaging system with 21x3 channels, 70 masculinex10 masculine field of view and 4.5mm x 0.5mm image size is optimized and analyzed using sequential and non-sequential raytracing and fabricated by microoptics technology. Anamorphic lenses, where the parameters are a function of the considered optical channel, are used to achieve a homogeneous optical performance over the whole field of view. Captured images are presented and compared to simulation results. PMID:19494951

  13. TSTA compound cryopump

    The Tritium System Test Assembly (TSTA), at the Los Alamos Scientific Laboratory, is intended to demonstrate realistic fuel supply and cleanup scenarios for future fusion reactors. The vacuum pumps must be capable of handling large quantities of reactor exhaust gases consisting largely of mixtures of hydrogen and helium isotopes. Cryocondensing pumps will not pump helium at 4.2 K; while cryosorption pumps using molecular sieves or charcoal have good helium pumping speed, the adsorbent clogs with condensed hydrogen while pumping mixtures of both. A solution to this problem is a compound design whereby the first stage condenses the hydrogen and the second, or sorption, stage pumps the helium. The TSTA pump designed at Lawrence Livermore National Laboratory uses argon gas to cryotrap the helium in the helium-hydrogen mixture. The argon is sprayed directly onto the 4.2 K surface at a rate proportional to the helium flow rate, permitting continuous pumping of the helium-hydrogen mixtures in a single-stage pump. However, the possibility of differential desorption as a first stage in the TSTA gas separation cycle required the inclusion of a first-stage hydrogen isotope condenser. The design, performance, and operating characteristics are discussed

  14. Compounding in synthetic aperture imaging.

    Hansen, Jens Munk; Jensen, Jørgen Arendt

    2012-09-01

    A method for obtaining compound images using synthetic aperture data is investigated using a convex array transducer. The new approach allows spatial compounding to be performed for any number of angles without reducing the frame rate or temporal resolution. This important feature is an intrinsic property of how the compound images are constructed using synthetic aperture data and an improvement compared with how spatial compounding is obtained using conventional methods. The synthetic aperture compound images are created by exploiting the linearity of delay-and-sum beamformation for data collected from multiple spherical emissions to synthesize multiple transmit and receive apertures, corresponding to imaging the tissue from multiple directions. The many images are added incoherently, to produce a single compound image. Using a 192-element, 3.5-MHz, λ-pitch transducer, it is demonstrated from tissue-phantom measurements that the speckle is reduced and the contrast resolution improved when applying synthetic aperture compound imaging. At a depth of 4 cm, the size of the synthesized apertures is optimized for lesion detection based on the speckle information density. This is a performance measure for tissue contrast resolution which quantifies the tradeoff between resolution loss and speckle reduction. The speckle information density is improved by 25% when comparing synthetic aperture compounding to a similar setup for compounding using dynamic receive focusing. The cystic resolution and clutter levels are measured using a wire phantom setup and compared with conventional application of the array, as well as to synthetic aperture imaging without compounding. If the full aperture is used for synthetic aperture compounding, the cystic resolution is improved by 41% compared with conventional imaging, and is at least as good as what can be obtained using synthetic aperture imaging without compounding. PMID:23007781

  15. Organic Compounds in Carbonaceous Meteorites

    Cooper, Grorge

    2001-01-01

    Carbonaceous meteorites are relatively enriched in soluble organic compounds. To date, these compounds provide the only record available to study a range of organic chemical processes in the early Solar System chemistry. The Murchison meteorite is the best-characterized carbonaceous meteorite with respect to organic chemistry. The study of its organic compounds has related principally to aqueous meteorite parent body chemistry and compounds of potential importance for the origin of life. Among the classes of organic compounds found in Murchison are amino acids, amides, carboxylic acids, hydroxy acids, sulfonic acids, phosphonic acids, purines and pyrimidines (Table 1). Compounds such as these were quite likely delivered to the early Earth in asteroids and comets. Until now, polyhydroxylated compounds (polyols), including sugars (polyhydroxy aldehydes or ketones), sugar alcohols, sugar acids, etc., had not been identified in Murchison. Ribose and deoxyribose, five-carbon sugars, are central to the role of contemporary nucleic acids, DNA and RNA. Glycerol, a three-carbon sugar alcohol, is a constituent of all known biological membranes. Due to the relative lability of sugars, some researchers have questioned the lifetime of sugars under the presumed conditions on the early Earth and postulated other (more stable) compounds as constituents of the first replicating molecules. The identification of potential sources and/or formation mechanisms of pre-biotic polyols would add to the understanding of what organic compounds were available, and for what length of time, on the ancient Earth.

  16. II-VI semiconductor compounds

    1993-01-01

    For condensed matter physicists and electronic engineers, this volume deals with aspects of II-VI semiconductor compounds. Areas covered include devices and applications of II-VI compounds; Co-based II-IV semi-magnetic semiconductors; and electronic structure of strained II-VI superlattices.

  17. Cytotoxic Compounds from Zanthoxylum Americanum

    2000-01-01

    Four pyranocoumarins: dipetaline, alloxanthoxyletin, xanthoxyletin, and xanthyletin, and two lignans: sesamin and asarinin were isolated from the northern prickly ash, Zanthoxylum americanum. To varying degrees, all six compounds inhibited the incorporation of tritiated thymidine into human leukemia (HL-60) cells and the inhibitory effect was dependent on the structures of the isolated compounds.

  18. Bilayer Effects of Antimalarial Compounds.

    Nicole B Ramsey

    Full Text Available Because of the perpetual development of resistance to current therapies for malaria, the Medicines for Malaria Venture developed the Malaria Box to facilitate the drug development process. We tested the 80 most potent compounds from the box for bilayer-mediated effects on membrane protein conformational changes (a measure of likely toxicity in a gramicidin-based stopped flow fluorescence assay. Among the Malaria Box compounds tested, four compounds altered membrane properties (p< 0.05; MMV007384 stood out as a potent bilayer-perturbing compound that is toxic in many cell-based assays, suggesting that testing for membrane perturbation could help identify toxic compounds. In any case, MMV007384 should be approached with caution, if at all.

  19. Optimizing Synthetic Aperture Compound Imaging

    Hansen, Jens Munk; Jensen, Jørgen Arendt

    2012-01-01

    Spatial compound images are constructed from synthetic aperture data acquired using a linear phased-array transducer. Compound images of wires, tissue, and cysts are created using a method, which allows both transmit and receive compounding without any loss in temporal resolution. Similarly to...... optimal for lesion detection. Synthetic aperture data are acquired from unfocused emissions and 154 compound images are constructed by synthesizing different aperture configurations with more or less compounding, all maintaining a constant resolution across depth corresponding to an f-number of 2.0 for...... transmit and receive. The same configurations are used for scanning a phantom with cysts, and it is demonstrated how an improved cysts contrast follows from an aperture configuration, which gives a higher value for the performance measure extracted from the phantom without cysts. A correlation value R = 0...

  20. Characterization of Sulfur Compounds in MTBE

    Mingqing Wu; Chunyan Chang; Tao Li; Jian Zhou; Liping Zhao

    2015-01-01

    A study is carried out on chemical constitution of sulfur compounds in MTBE and their formation mechanisms. These sulfur compounds are classified into three types: common sulfur compounds, newly formed sulfur compounds, and high boiling sulfur compounds. Common sulfur compounds which include mercaptans, low molecule sulfides and disulfides, are directly from C4, one of the stocks for production of MTBE. The newly formed sulfur compounds, with one sulfur atom and five or more total carbon atom...

  1. Nomenclature on an organic compound (I)

    This book is about nomenclature on an organic compound, which includes introduction with general principle on nomenclature on compounds it describes hydrocarbon like terpene hydrocarbon, basic heterocyclic organic compound including carbon, hydrogen, oxygen, nitrogen, halogen, sulfur, selenium and tellurium such as nomenclature system, halogen derivatives, alcohol and phenol derivatives, compound with sulfur, amino, nitroso and nitro compound, amino radical ion, azo and azoxy compound, compound including an atom group, hydrazine and derivatives.

  2. Regulation of Compound Leaf Development

    Yuan Wang

    2013-12-01

    Full Text Available Leaf morphology is one of the most variable, yet inheritable, traits in the plant kingdom. How plants develop a variety of forms and shapes is a major biological question. Here, we discuss some recent progress in understanding the development of compound or dissected leaves in model species, such as tomato (Solanum lycopersicum, Cardamine hirsuta and Medicago truncatula, with an emphasis on recent discoveries in legumes. We also discuss progress in gene regulations and hormonal actions in compound leaf development. These studies facilitate our understanding of the underlying regulatory mechanisms and put forward a prospective in compound leaf studies.

  3. Crystallographic properties of fertilizer compounds

    Frazier, A.W.; Dillard, E.F.; Thrasher, R.D.; Waerstad, K.R.; Hunter, S.R.; Kohler, J.J.; Scheib, R.M.

    1991-02-01

    This bulletin is a compilation of crystallographic data collected at NFERC on 450 fertilizer-related compounds. In TVA's fertilizer R and D program, petrographic examination, XRD, and infrared spectroscopy are combined with conventional chemical analysis methods in identifying the individual compounds that occur in fertilizer materials. This handbook brings together the results of these characterization studies and supplemental crystallographic data from the literature. It is in one-compound-per-page, loose-leaf format, ordered alphabetically by IUPAC name. Indexes provided include IUPAC name, formula, group, alternate formula, synonyms, x-ray data, optical data. Tables are given for solids, compounds in commercial MAP and DAP, and matrix materials in phosphate rock.

  4. The precipitation of vanadium compounds

    The results of a study on the chemistry of the precipitation process of vanadium compounds in sulfuric media are presented, in order to recover the vanadium contained in the ore from Campo Alegre de Lourdes (Bahia-Brazil). (Author)

  5. Optimization of compound gear pump

    栾振辉

    2002-01-01

    This paper introduces the performances of compound gear pump. Based on the target of having the smallest mass per unit volume, the paper established a mathematical model of optimization, and obtained the results of optimization of the pump.

  6. Fourth symposium on macrocyclic compounds

    Both theoretical and experimental aspects of the properties and behavior of synthetic and naturally occurring macrocyclic compounds are covered in this symposium. This document contains abstracts of the papers

  7. The demise of compound houses

    Andreasen, Jørgen; Eskemose Andersen, Jørgen

    2006-01-01

    The compound house has long provided the accomodation required by low income households in West African cities. In Kumasi, Ghana, evidence suggests that no new compounds are being built. Instead, the city is being ringed by relatively affluent villa-style development while neighbourhoods dominated...... the neighbourhood unity is a challenge for urban planners. However they represent good value for money, cost little to build, suit traditional inheritence patterns, allow independent life at low cost and allow sharing of services with a finite and known group (albeit within a potential conflictive...... characteristics of compound housing and analyses the advantages and disadvantages of life within such housing in Kumasi. Issues of privacy, image and communal life are usually cited by occupants dissatiesfied with life in compound houses, and the difficulty of extending them without spoiling the open spaces and...

  8. Compounding in synthetic aperture imaging

    Hansen, J. M.; Jensen, J. A.

    2012-01-01

    A method for obtaining compound images using synthetic aperture data is investigated using a convex array transducer. The new approach allows spatial compounding to be performed for any number of angles without reducing the frame rate or temporal resolution. This important feature is an intrinsic...... from multiple spherical emissions to synthesize multiple transmit and receive apertures, corresponding to imaging the tissue from multiple directions. The many images are added incoherently, to produce a single compound image. Using a 192-element, 3.5-MHz, λ-pitch transducer, it is demonstrated from...... tissue-phantom measurements that the speckle is reduced and the contrast resolution improved when applying synthetic aperture compound imaging. At a depth of 4 cm, the size of the synthesized apertures is optimized for lesion detection based on the speckle information density. This is a performance...

  9. Quality control of labelled compounds

    Some advantages and disadvantages of methods used for quality control of organic labelled compounds (131I, 14C) are shortly discussed. The methods used are electrophoresis, ultraviolet and infrared spectrometry, radiogas and thin-layer chromatography. (author)

  10. Phenolic Compounds in Brassica Vegetables

    Pablo Velasco

    2010-12-01

    Full Text Available Phenolic compounds are a large group of phytochemicals widespread in the plant kingdom. Depending on their structure they can be classified into simple phenols, phenolic acids, hydroxycinnamic acid derivatives and flavonoids. Phenolic compounds have received considerable attention for being potentially protective factors against cancer and heart diseases, in part because of their potent antioxidative properties and their ubiquity in a wide range of commonly consumed foods of plant origin. The Brassicaceae family includes a wide range of horticultural crops, some of them with economic significance and extensively used in the diet throughout the world. The phenolic composition of Brassica vegetables has been recently investigated and, nowadays, the profile of different Brassica species is well established. Here, we review the significance of phenolic compounds as a source of beneficial compounds for human health and the influence of environmental conditions and processing mechanisms on the phenolic composition of Brassica vegetables.

  11. Multi-angle compound imaging

    Jespersen, Søren Kragh; Wilhjelm, Jens Erik; Sillesen, Henrik

    1998-01-01

    This paper reports on a scanning technique, denoted multi-angle compound imaging (MACI), using spatial compounding. The MACI method also contains elements of frequency compounding, as the transmit frequency is lowered for the highest beam angles in order to reduce grating lobes. Compared to...... conventional B-mode imaging MACI offers better defined tissue boundaries and lower variance of the speckle pattern, resulting in an image with reduced random variations. Design and implementation of a compound imaging system is described, images of rubber tubes and porcine aorta are shown and effects on...... visualization are discussed. The speckle reduction is analyzed numerically and the results are found to be in excellent agreement with existing theory. An investigation of detectability of low-contrast lesions shows significant improvements compared to conventional imaging. Finally, possibilities for improving...

  12. Third Symposium on Macrocyclic Compounds

    At the Third Symposium on Macrocyclic Compounds there were sessions on facilitated transport, analytical applications, organic synthesis and reactions, phase transfer catalysis, and metal complexation. Abstracts of the individual presentations are included

  13. Structural Library of Natural Compounds

    Subhash Chandra Bose Kotte

    2011-07-01

    Full Text Available Natural products with biological activity are of considerable interest to drug discovery community and a structural library of such compounds serves as data set for insilico experiments to predict the target specific activity before screening them in in-vitro experiments. This work leverages open source scientific tools to create a database of such compounds library in Structure Data Format with 3D coordinates which in turn may be used as an input file for various applications.

  14. Phenolic Compounds in Brassica Vegetables

    Pablo Velasco; María Elena Cartea; Pilar Soengas; Marta Francisco

    2011-01-01

    Phenolic compounds are a large group of phytochemicals widespread in the plant kingdom. Depending on their structure they can be classified into simple phenols, phenolic acids, hydroxycinnamic acid derivatives and flavonoids. Phenolic compounds have received considerable attention for being potentially protective factors against cancer and heart diseases, in part because of their potent antioxidative properties and their ubiquity in a wide range of commonly consumed foods of plant origin. The...

  15. Transplacental Transfer of Perfluorinated Compounds

    Adhikari, M.

    2015-01-01

    Humans are exposed to chemical carcinogens and endocrine disruptors for instances through environment and diet they consume. Special attention should be paid to pregnant mothers in whom consumption of any harmful compounds can lead to adverse effects in a new born baby as it is believed that these compounds pass through the placenta. The developing foetus is vulnerable to toxic and teratogenic effects and the prenatal exposure of chemicals might lead to developmental changes or even increase ...

  16. Sulfated compounds from marine organisms.

    Kornprobst, J M; Sallenave, C; Barnathan, G

    1998-01-01

    More than 500 sulfated compounds have been isolated from marine organisms so far but most of them originate from two phyla only, Spongia and Echinodermata. The sulfated compounds are presented according to the phyla they have been identified from and to their chemical structures. Biological activities, when available, are also given. Macromolecules have also been included in this review but without structural details. PMID:9530808

  17. Antitumor compounds from marine actinomycetes.

    Salas, José A.; Carmen Méndez; Carlos Olano

    2009-01-01

    Chemotherapy is one of the main treatments used to combat cancer. A great number of antitumor compounds are natural products or their derivatives, mainly produced by microorganisms. In particular, actinomycetes are the producers of a large number of natural products with different biological activities, including antitumor properties. These antitumor compounds belong to several structural classes such as anthracyclines, enediynes, indolocarbazoles, isoprenoides, macrolides, non-ribosomal pept...

  18. Cancer chemoprevention by natural compounds

    スズキ, マスミ; Masumi, SUZUI

    2007-01-01

    There is growing interest in the use of natural compounds for the treatment and prevention of a wide variety of diseases, including cancer. Several herb-derived components are currently evaluated in preclinical studies as potential cancer chemopreventive agents. We have recently found that several herbal plants in the Ryukyu Islands, or any other natural compound, have a potential chemopreventive effect on biomarkers of colon carcinogenesis and a growth inhibitory effect on human cancer cells...

  19. Insertion compounds of uranium oxides

    Insertion compounds are formed by the intercalation of an electropositive species, such as hydrogen or an alkali metal, with minimal structural rearrangement of the host oxide. In this report a review of the measured structural, thermodynamic and transport properties of the insertion compounds of α-U3O8, α-UO3, γ-UO3, δ-UO3 and related systems is given. (author)

  20. Antitumor Immunity and Dietary Compounds

    Annalise R. Smith

    2013-12-01

    Full Text Available The mechanisms by which natural dietary compounds exert their antitumor effects have been the focus of a large number of research efforts in recent years. Induction of apoptosis by inhibition of cell proliferative pathways is one of the common means of cell death employed by these dietary compounds. However, agents that can activate an antitumor immune response in addition to a chemotherapeutic effect may be useful adjuvants or alternative therapies for the treatment of cancer. The focus of this review is to highlight representative dietary compounds, namely Withania somnifera, Panax ginseng, curcumin and resveratrol with special emphasis on their antitumor immune mechanism of action. Each of these dietary compounds and their sources has a history of safe human use as food or in herbal medicine traditions, potentially making them ideal therapeutics. Here we report the recent advances in the cellular immune mechanisms utilized by these compounds to induce antitumor immunity. Taken together, these findings provide a new perspective for exploiting novel dietary compounds as chemoimmunotherapeutic anti-cancer agents.

  1. Host compounds for red phosphorescent OLEDs

    Xia, Chuanjun; Cheon, Kwang -Ohk

    2015-08-25

    Novel compounds containing a triphenylene moiety linked to an .alpha..beta. connected binaphthyl ring system are provided. These compounds have surprisingly good solubility in organic solvents and are useful as host compounds in red phosphorescent OLEDs.

  2. Method for purifying bidentate organophosphorus compounds

    Schulz, Wallace W.

    1977-01-01

    Bidentate organophosphorus compounds useful for extracting actinide elements from acidic nuclear waste solutions are purified of undesirable acidic impurities by contacting the compounds with ethylene glycol which preferentially extracts the impurities found in technical grade bidentate compounds.

  3. Nomenclature on an organic compound (II)

    This book deals with nomenclature on an organic compound except carbon, hydrogen, oxygen, nitrogen, halogen, sulfur, selenium and tellurium. It mentions introduction, nomenclature system, coordination compound, an organo-metallic compound, homogeneous chains and rings with regular form of heteroatoms, organic compound including arsenic, phosphorus and bismuth, stereochemistry, nomenclature of compound related a natural substance, modified compound in to an isotope. The last chapter has recommendation on general principle and instruction for nomenclature.

  4. Al-Al compound casting

    Papis, Konrad; Uggowitzer, Peter; Loeffler, Joerg [ETH Zurich, Laboratory of Metal Physics and Technology, Zurich (Switzerland)

    2007-07-01

    'Compound casting' is a process where a melt is cast onto or around a solid metallic 'insert'. It is the realization of a simple joining procedure for light metals aimed at weight-saving. Difficulties inherent in joining aluminium are its natural oxide layer and the formation of intermetallic phases. In this project, both the solid substrate and the melt used are aluminium alloys containing various alloying elements (Cu, Si, Zn in the melt, Mg in the substrate). Compounds with flawless interfaces (no contraction defects, no oxides) were successfully produced by replacing the oxide layer with a zinc layer. This was accomplished by pickling the substrate in a solution containing zincate ions, implying a redox reaction by which zinc is deposited in its metallic form. The composition and mechanical properties of the compounds' interfacial regions were investigated by SEM/EDX and microhardness measurements following the 'compound casting' process and successive heat treatments. DICTRA calculations were carried out to simulate the diffusion processes at the interface. The results from the mechanical characterization were compared to the simulations, the conclusion being that diffusion of alloying elements led to precipitation hardening of the compound.

  5. Particle formation of gas-phase silicon compounds and aromatic compounds by light or electron irradiation

    A number of silicon compounds and aromatic compounds form particles under UV light or electron beam irradiation in the gas phase. Carbonyl compounds, halogen compounds and some aromatic compounds act as initiators for photo-induced particle formation of silicon compounds. (author)

  6. Biodegradation of halogenated organic compounds.

    Chaudhry, G R; Chapalamadugu, S

    1991-03-01

    In this review we discuss the degradation of chlorinated hydrocarbons by microorganisms, emphasizing the physiological, biochemical, and genetic basis of the biodegradation of aliphatic, aromatic, and polycyclic compounds. Many environmentally important xenobiotics are halogenated, especially chlorinated. These compounds are manufactured and used as pesticides, plasticizers, paint and printing-ink components, adhesives, flame retardants, hydraulic and heat transfer fluids, refrigerants, solvents, additives for cutting oils, and textile auxiliaries. The hazardous chemicals enter the environment through production, commercial application, and waste. As a result of bioaccumulation in the food chain and groundwater contamination, they pose public health problems because many of them are toxic, mutagenic, or carcinogenic. Although synthetic chemicals are usually recalcitrant to biodegradation, microorganisms have evolved an extensive range of enzymes, pathways, and control mechanisms that are responsible for catabolism of a wide variety of such compounds. Thus, such biological degradation can be exploited to alleviate environmental pollution problems. The pathways by which a given compound is degraded are determined by the physical, chemical, and microbiological aspects of a particular environment. By understanding the genetic basis of catabolism of xenobiotics, it is possible to improve the efficacy of naturally occurring microorganisms or construct new microorganisms capable of degrading pollutants in soil and aquatic environments more efficiently. Recently a number of genes whose enzyme products have a broader substrate specificity for the degradation of aromatic compounds have been cloned and attempts have been made to construct gene cassettes or synthetic operons comprising these degradative genes. Such gene cassettes or operons can be transferred into suitable microbial hosts for extending and custom designing the pathways for rapid degradation of recalcitrant

  7. A Compound MRF Texture Model

    Haindl, Michal; Havlíček, Vojtěch

    Los Alamitos : IEEE Computer Society CPS, 2010, s. 1792-1795. ISBN 978-1-4244-7542-1. ISSN 1051-4651. [20th International Conference on Pattern Recognition ICPR 2010. Istanbul (TR), 23.08.2010-26.08.2010] R&D Projects: GA MŠk 1M0572; GA ČR GA102/08/0593 Grant ostatní: GA MŠk(CZ) 2C06019 Institutional research plan: CEZ:AV0Z10750506 Keywords : compound Markov random field * bidirectional texture function Subject RIV: BD - Theory of Information http://library.utia.cas.cz/separaty/2010/RO/haindl-a compound mrf texture model.pdf

  8. Method to extract uranium compounds

    The uranium compounds present in gangue of phosphate ores are also to be determined and extracted with the proposed method. The gangue-water mixture in phosphate extraction is to be displaced, according to the invention, by a component which selectively dissolves the uranium compounds out of the gangue. The enriched solution is separated off and processed. Weak acids (e.g. phosphoric acid, acetre acid, citric acid), lyes (e.g. ammonium carbonate, soda) or salts (e.g. sodium hydrogen phosphate, NaHCO3 tartrates) are named as solution components. (UWI)

  9. Antiprotozoal compounds from Asparagus africanus

    Oketch-Rabah, H A; Dossaji, S F; Christensen, S B;

    1997-01-01

    Two antiprotozoal compounds have been isolated from the roots of Asparagus africanus Lam. (Liliaceae), a new sapogenin, 2 beta, 12 alpha-dihydroxy-(25R)-spirosta-4,7-dien-3-one (1), which was named muzanzagenin, and the lignan (+)-nyasol (2), (Z)-(+)-4,4'-(3-ethenyl-1-propene-1,3-diyl)-bisphenol.......Two antiprotozoal compounds have been isolated from the roots of Asparagus africanus Lam. (Liliaceae), a new sapogenin, 2 beta, 12 alpha-dihydroxy-(25R)-spirosta-4,7-dien-3-one (1), which was named muzanzagenin, and the lignan (+)-nyasol (2), (Z)-(+)-4,4'-(3-ethenyl-1-propene-1,3-diyl...

  10. The structures of binary compounds

    Hafner, J; Jensen, WB; Majewski, JA; Mathis, K; Villars, P; Vogl, P; de Boer, FR

    1990-01-01

    - Up-to-date compilation of the experimental data on the structures of binary compounds by Villars and colleagues. - Coloured structure maps which order the compounds into their respective structural domains and present for the first time the local co-ordination polyhedra for the 150 most frequently occurring structure types, pedagogically very helpful and useful in the search for new materials with a required crystal structure. - Crystal co-ordination formulas: a flexible notation for the interpretation of solid-state structures by chemist Bill Jensen. - Recent important advances in unders

  11. Halogenated Compounds from Marine Algae

    Amélia Pilar Rauter

    2010-08-01

    Full Text Available Marine algae produce a cocktail of halogenated metabolites with potential commercial value. Structures exhibited by these compounds go from acyclic entities with a linear chain to complex polycyclic molecules. Their medical and pharmaceutical application has been investigated for a few decades, however other properties, such as antifouling, are not to be discarded. Many compounds were discovered in the last years, although the need for new drugs keeps this field open as many algal species are poorly screened. The ecological role of marine algal halogenated metabolites has somehow been overlooked. This new research field will provide valuable and novel insight into the marine ecosystem dynamics as well as a new approach to comprehending biodiversity. Furthermore, understanding interactions between halogenated compound production by algae and the environment, including anthropogenic or global climate changes, is a challenging target for the coming years. Research of halogenated metabolites has been more focused on macroalgae than on phytoplankton. However, phytoplankton could be a very promising material since it is the base of the marine food chain with quick adaptation to environmental changes, which undoubtedly has consequences on secondary metabolism. This paper reviews recent progress on this field and presents trends on the role of marine algae as producers of halogenated compounds.

  12. Moessbauer spectroscopy in neptunium compounds

    Nakamoto, Tadahiro; Nakada, Masami; Masaki, Nobuyuki; Saeki, Masakatsu [Japan Atomic Energy Research Inst., Tokyo (Japan)

    1997-03-01

    Moessbauer effects are observable in seven elements of actinides from {sup 232}Th to {sup 247}Cm and Moesbauer spectra have been investigated mainly with {sup 237}Np and {sup 238}U for the reasons of availability and cost of materials. This report describes the fundamental characteristics of Moessbauer spectra of {sup 237}Np and the correlation between the isomer shift and the coordination number of Np(V) compounds. The isomer shifts of Np(V) compounds had a tendency to increase as an increase of coordination number and the isomer shifts of Np(V) compounds showed broad distribution as well as those of Np(VI) but {delta} values of the compounds with the same coordination number were distributed in a narrow range. The {delta} values of Np(VI) complexes with O{sub x} donor set suggest that the Np atom in its hydroxide (NpO{sub 2}(OH){center_dot}4H{sub 2}O)might have pentagonal bipyramidal structure and at least, pentagonal and hexagonal bipyramidal structures might coexist in its acetate and benzoate. Really, such coexistence has been demonstrated in its nitrate, (NpO{sub 2}){sub 2}(NO{sub 3}){sub 2}{center_dot}5H{sub 2}O. (M.N.)

  13. Unpacking Noun-Noun Compounds

    Smith, Viktor; Barratt, Daniel; Zlatev, Jordan

    2014-01-01

    Danish food market and using Danish NNCs. Specifically, we addressed a highly productive type of compound food names where the modifier denotes a geographical entity and the head denotes a type of food, e.g. Hawaii pizza. Our findings contribute new evidence to central issues of (cognitive) linguistic...

  14. Organophosphorus Compounds in Organic Electronics.

    Shameem, Muhammad Anwar; Orthaber, Andreas

    2016-07-25

    This Minireview describes recent advances of organophosphorus compounds as opto-electronic materials in the field of organic electronics. The progress of (hetero-) phospholes, unsaturated phosphanes, and trivalent and pentavalent phosphanes since 2010 is covered. The described applications of organophosphorus materials range from single molecule sensors, field effect transistors, organic light emitting diodes, to polymeric materials for organic photovoltaic applications. PMID:27276233

  15. Instability of viscoelastic compound jets

    Ye, Han-Yu; Yang, Li-Jun; Fu, Qing-Fei

    2016-04-01

    This paper investigates the axisymmetric instability of a viscoelastic compound jet, for which the constitutive relation is described by the Oldroyd B model. It is found that a viscoelastic compound jet is more unstable than a Newtonian compound jet, regardless of whether the viscoelastic compound jet is inner-Newtonian-outer-viscoelastic, inner-viscoelastic-outer-Newtonian, or fully viscoelastic. It is also found that an increase in the stress relaxation time of the inner or outer fluid renders the jet more unstable, while an increase in the time constant ratio makes the jet less unstable. An analysis of the energy budget of the destabilization process is performed, in which a formulation using the relative rate of change of energy is adopted. The formulation is observed to provide a quantitative analysis of the contribution of each physical factor (e.g., release of surface energy and viscous dissipation) to the temporal growth rate. The energy analysis reveals the mechanisms of various trends in the temporal growth rate, including not only how the growth rate changes with the parameters, but also how the growth rate changes with the wavenumber. The phenomenon of the dispersion relation presenting two local maxima, which occurred in previous research, is explained by the present energy analysis.

  16. Fission Dynamics of Compound Nuclei

    Iwata, Yoritaka; Heinz, Sophia

    2012-01-01

    Collisions between $^{248}$Cm and $^{48}$Ca are systematically investigated by time-dependent density functional calculations with evaporation prescription. Depending on the incident energy and impact parameter, fusion, deep-inelastic and quasi-fission events are expected to appear. In this paper, possible fission dynamics of compound nuclei is presented.

  17. Students' Categorizations of Organic Compounds

    Domin, Daniel S.; Al-Masum, Mohammad; Mensah, John

    2008-01-01

    Categorization is a fundamental psychological ability necessary for problem solving and many other higher-level cognitive tasks. In organic chemistry, students must establish groupings of different chemical compounds in order not only to solve problems, but also to understand course content. Classic models of categorization emphasize similarity as…

  18. Compound Cuing in Free Recall

    Lohnas, Lynn J.; Kahana, Michael J.

    2014-01-01

    According to the retrieved context theory of episodic memory, the cue for recall of an item is a weighted sum of recently activated cognitive states, including previously recalled and studied items as well as their associations. We show that this theory predicts there should be compound cuing in free recall. Specifically, the temporal contiguity…

  19. An epoxide modified polymerisable compound

    The description is given of an epoxide modified polymerisable compound. It includes a mixture of the following reactive substances; a vinyled carboxylic acid which is acrylic or methacrylic acid; an aliphatic epoxide; a diepoxide and a modifier containing a reagent group that is a carboxylic acid; a phenol, an alcohol, a carboxylic acid amide or a carboxylic acid halogenide

  20. Olive oil phenolic compounds affect the release of aroma compounds.

    Genovese, Alessandro; Caporaso, Nicola; Villani, Veronica; Paduano, Antonello; Sacchi, Raffaele

    2015-08-15

    Twelve aroma compounds were monitored and quantified by dynamic headspace analysis after their addition in refined olive oil model systems with extra virgin olive oil (EVOO) biophenols to simulate EVOO aroma. The influence of polyphenols on aroma release was studied under simulated mouth conditions by using human saliva, and SPME-GC/MS analysis. While few differences were observed in orthonasal assay (without saliva), interesting results were obtained for retronasal aroma. Biophenols caused generally the lowest headspace release of almost all volatile compounds. However, only ethyl esters and linalool concentrations were significantly lower in retronasal than orthonasal assay. Saliva also caused higher concentration of hexanal, probably due to hydroperoxide lyase (HPL) action on linoleyl hydroperoxides. Epicatechin was compared to EVOO phenolics and the behaviour was dramatically different, likely to be due to salivary protein-tannin binding interactions, which influenced aroma headspace release. These results were also confirmed using two extra virgin olive oils. PMID:25794752

  1. Fe organoiron compounds. Pt. B11

    The chapter of compounds with ligands bonded by five carbon atoms deals with one 5L ligand, one 5L ligands and additional 1L ligands. In this chapter, there are different type compounds or complexes with iron containing carbonyl nitroxyl. The chapter of compounds with two CO ligands present the organoiron compounds with halide, where we find chemical properties, physical properties, analysis, adducts formation with halogen. In the last chapters, different compound with oxygen, nitrogen and their mechanism is discussed. (AB)

  2. Heuristics for chemical compound matching.

    Hattori, Masahiro; Okuno, Yasushi; Goto, Susumu; Kanehisa, Minoru

    2003-01-01

    We have developed an efficient algorithm for comparing two chemical compounds, where the chemical structure is treated as a 2D graph consisting of atoms as vertices and covalent bonds as edges. Based on the concept of functional groups in chemistry, 68 atom types (vertex types) are defined for carbon, nitrogen, oxygen, and other atomic species with different environments, which has enabled detection of biochemically meaningful features. Maximal common subgraphs of two graphs can be found by searching for maximal cliques in the association graph, and we have introduced heuristics to accelerate the clique finding. Our heuristic procedure is controlled by some adjustable parameters. Here we applied our procedure to the latest KEGG/LIGAND database with different sets of parameters, and demonstrated the correlation of parameters in our algorithm with the distribution of similarity scores and/or the execution time. Finally, we showed the effectiveness of our heuristics for compound pairs along metabolic pathways. PMID:15706529

  3. Microstructural degradation in compound tubes

    Salonen, J.; Auerkari, P. [VTT Manufacturing Technology, Espoo (Finland)

    1996-12-31

    In order to quantify microstructural degradation at high temperatures, samples of SA 210 / AISI 304 L compound tube material were annealed in the temperature range 540-720 deg C for 1 to 1 000 hours. The hardness of the annealed material was measured and the micro structure of the samples was investigated with optical and scanning electron microscopy. Microstructural degradation was characterised by the carbide structure in the ferritic-pearlitic base material and by the depth of decarburised and carburised zones of the compound tube interface. The observed changes were quantified in terms of their time and temperature dependence and diffusion coefficients of the process. The results can be used in estimating the extent of thermal exposure of high-temperature components after long-term service or after incidences of overheating. (orig.) (4 refs.)

  4. Bacterial Degradation of Aromatic Compounds

    Qing X. Li

    2009-01-01

    Full Text Available Aromatic compounds are among the most prevalent and persistent pollutants in the environment. Petroleum-contaminated soil and sediment commonly contain a mixture of polycyclic aromatic hydrocarbons (PAHs and heterocyclic aromatics. Aromatics derived from industrial activities often have functional groups such as alkyls, halogens and nitro groups. Biodegradation is a major mechanism of removal of organic pollutants from a contaminated site. This review focuses on bacterial degradation pathways of selected aromatic compounds. Catabolic pathways of naphthalene, fluorene, phenanthrene, fluoranthene, pyrene, and benzo[a]pyrene are described in detail. Bacterial catabolism of the heterocycles dibenzofuran, carbazole, dibenzothiophene, and dibenzodioxin is discussed. Bacterial catabolism of alkylated PAHs is summarized, followed by a brief discussion of proteomics and metabolomics as powerful tools for elucidation of biodegradation mechanisms.

  5. Thin compound-eye camera.

    Duparré, Jacques; Dannberg, Peter; Schreiber, Peter; Bräuer, Andreas; Tünnermann, Andreas

    2005-05-20

    An artificial compound-eye objective fabricated by micro-optics technology is adapted and attached to a CMOS sensor array. The novel optical sensor system with an optics thickness of only 0.2 mm is examined with respect to resolution and sensitivity. An optical resolution of 60 x 60 pixels is determined from captured images. The scaling behavior of artificial compound-eye imaging systems is analyzed. Cross talk between channels fabricated by different technologies is evaluated, and the influence on an extension of the field of view by addition of a (Fresnel) diverging lens is discussed. The lithographic generation of opaque walls between channels for optical isolation is experimentally demonstrated. PMID:15929282

  6. Compounds in food packaging materials

    Rosenmai, Anna Kjerstine

    Food contact materials (FCMs) are sources of food contamination and human chemical exposure. Some chemicals in these materials are known to cause adverse effects, but many are poorly characterized for their potential toxicological hazards making risk assessment a challenge. The aim of the project...... were tested in vitro, active extracts were fractionated and tested in vitro, tentative identification was performed in active fractions, and tentatively identified compounds were tested in vitro and quantified in the extract. BPA analogues generally led to similar estrogenic and antiandrogenic effects...... in vitro compared to BPA. However, the BPA analogue BPS caused less marked effects on most of these endpoints, but led to a more pronounced effects on progestagen levels compared to BPA. Likewise, the effects on corticoid levels in the H295R steroidogenesis assay differed between the six compounds...

  7. Bioactive compounds from Carissa spinarum.

    Wangteeraprasert, Ruchira; Lipipun, Vimolmas; Gunaratnam, Mekala; Neidle, Stephen; Gibbons, Simon; Likhitwitayawuid, Kittisak

    2012-10-01

    In our continuing efforts to find new antiherpetic agents from plants, an extract prepared from the stems of Carissa spinarum L. was found to possess appreciable activity against herpes simplex viruses (HSV I and II). A chemical study of this plant was then initiated, and this led to the isolation of 12 compounds, including a coumarin, two cardiac glycosides and nine lignans. These isolated compounds were evaluated for several biological activities, including antiherpetic, cytotoxic, antioxidant and antibacterial effects. The cardiac glycoside evomonoside was found to be the only antiherpetic principle, showing moderate activity against herpes simplex virus types I and II in the inactivation method. The lignans (-)-carinol, (-)-carissanol and (-)-nortrachelogenin exhibited cytotoxicity against breast (MCF7) and lung (A549) cancer cells. Moderate anti-DPPH free radical activity was observed for all the lignans. None of the isolates showed antibacterial activity. PMID:22308099

  8. [Compound at Takalafiya, c.1939

    Unknown

    2003-01-01

    Showing two girls spinning yarn in a compound. The photograph is part of a series of British Official photographs (Crown Copyright Reserved) issued under the general title 'Sleeping sickness experiment is pattern for progress in rural Africa'. The photograph has two captions stuck on the reverse. The first reads: 'The British Government is carrying out a successful and interesting experiment in Nigeria, to beat that great menace to African life, Sleeping Sickness. The town of Anchau, cent...

  9. The formation of new compounds

    Gasparoli, A.

    1998-01-01

    The formation of new compounds The study of model systems allows us to reconstruct the complex mosaic of reactions which make up the frying process. In particular such systems, if made up of single oils or their components, verify the transformation of the triglyceride matrix by thermo-oxidizing treatment. Should this then have added specific substrates (protein, starch) they reconstruct the oil-substrate interaction and the influence of the same substrate in the transformation. The contribut...

  10. Polymer-solvent molecular compounds

    Guenet, Jean-Michel

    2010-01-01

    Crystallisable polymers represent a large share of the polymers used for manufacturing a wide variety of objects, and consequently have received continuous attention from scientists these past 60 years. Molecular compounds from crystallisable polymers, particularly from synthetic polymers, are receiving growing interest due to their potential application in the making of new materials such as multiporous membranes capable of capturing large particles as well as small pollutant molecules. The present book gives a detailed description of these promising systems. The first chapter

  11. Quantitative analysis of endogenous compounds.

    Thakare, Rhishikesh; Chhonker, Yashpal S; Gautam, Nagsen; Alamoudi, Jawaher Abdullah; Alnouti, Yazen

    2016-09-01

    Accurate quantitative analysis of endogenous analytes is essential for several clinical and non-clinical applications. LC-MS/MS is the technique of choice for quantitative analyses. Absolute quantification by LC/MS requires preparing standard curves in the same matrix as the study samples so that the matrix effect and the extraction efficiency for analytes are the same in both the standard and study samples. However, by definition, analyte-free biological matrices do not exist for endogenous compounds. To address the lack of blank matrices for the quantification of endogenous compounds by LC-MS/MS, four approaches are used including the standard addition, the background subtraction, the surrogate matrix, and the surrogate analyte methods. This review article presents an overview these approaches, cite and summarize their applications, and compare their advantages and disadvantages. In addition, we discuss in details, validation requirements and compatibility with FDA guidelines to ensure method reliability in quantifying endogenous compounds. The standard addition, background subtraction, and the surrogate analyte approaches allow the use of the same matrix for the calibration curve as the one to be analyzed in the test samples. However, in the surrogate matrix approach, various matrices such as artificial, stripped, and neat matrices are used as surrogate matrices for the actual matrix of study samples. For the surrogate analyte approach, it is required to demonstrate similarity in matrix effect and recovery between surrogate and authentic endogenous analytes. Similarly, for the surrogate matrix approach, it is required to demonstrate similar matrix effect and extraction recovery in both the surrogate and original matrices. All these methods represent indirect approaches to quantify endogenous compounds and regardless of what approach is followed, it has to be shown that none of the validation criteria have been compromised due to the indirect analyses. PMID

  12. Dynamical Friction for Compound Bodies

    Domínguez-Tenreiro, R.; Gómez-Flechoso, M. A.

    1997-01-01

    In the framework of the fluctuation-dissipation approach to dynamical friction, we derive an expression giving the orbital energy exchange experienced by a compound body as it moves interacting with a non homogeneous discrete background. The body is assumed to be composed of particles endowed with a velocity spectrum and with a non homogeneous spatial distribution. The Chandrasekhar formula is recovered in the limit of a point-like satellite with zero velocity dispersion and infinite temperat...

  13. Optimization of compound pressure cylinders

    G.H. Majzoobi; A. Ghomi

    2006-01-01

    Purpose: The purpose of this paper is optimization of the weight of compound cylinder for a specific pressure. The variables are shrinkage radius and shrinkage tolerance.Design/methodology/approach: SEQ technique for optimization, the finite element code, ANSYS for numerical simulation are employed to predict the optimized conditions. The results are verified by testing a number of closed end cylinders with various geometries, materials and internal pressures.Findings: The weight of a compoun...

  14. Natural Compounds Modulating Mitochondrial Functions

    Lara Gibellini

    2015-01-01

    Full Text Available Mitochondria are organelles responsible for several crucial cell functions, including respiration, oxidative phosphorylation, and regulation of apoptosis; they are also the main intracellular source of reactive oxygen species (ROS. In the last years, a particular interest has been devoted to studying the effects on mitochondria of natural compounds of vegetal origin, quercetin (Qu, resveratrol (RSV, and curcumin (Cur being the most studied molecules. All these natural compounds modulate mitochondrial functions by inhibiting organelle enzymes or metabolic pathways (such as oxidative phosphorylation, by altering the production of mitochondrial ROS and by modulating the activity of transcription factors which regulate the expression of mitochondrial proteins. While Qu displays both pro- and antioxidant activities, RSV and Cur are strong antioxidant, as they efficiently scavenge mitochondrial ROS and upregulate antioxidant transcriptional programmes in cells. All the three compounds display a proapoptotic activity, mediated by the capability to directly cause the release of cytochrome c from mitochondria or indirectly by upregulating the expression of proapoptotic proteins of Bcl-2 family and downregulating antiapoptotic proteins. Interestingly, these effects are particularly evident on proliferating cancer cells and can have important therapeutic implications.

  15. Bioactive compounds from northern plants.

    Hohtola, Anja

    2010-01-01

    Northern conditions are characterised by long days with much light and low temperatures during the growing season. It has been chimed that herbs and berries grown in the north are stronger tasting compared to those of southern origin. The compounds imparting aroma and color to berries and herbs are secondary metabolites which in plants mostly act as chemical means of defense. Recently, the production of secondary metabolites using plant cells has been the subject of expanding research. Light intensity, photoperiod and temperature have been reported to influence the biosynthesis of many secondary metabolites. Native wild aromatic and medicinal plant species of different families are being studied to meet the needs of raw material for the expanding industry of e.g., health-promoting food products known as nutraceutics. There are already a large number of known secondary compounds produced by plants, but the recent advances in modern extraction and analysis should enable many more as yet unknown compounds to be found, characterised and utilised. Rose root (Rhodiola rosea) is a perennial herbaceous plant which inhabits mountain regions throughout Europe, Asia and east coastal regions of North America. The extract made from the rhizomes acts as a stimulant like the Ginseng root. Roseroot has been categorized as an adaptogen and is reported to have many pharmacological properties. The biologically active components of the extract are salitroside tyrosol and cinnamic acid glycosides (rosavin, rosarin, rosin). Round-leaved sundew (Drosera rotundifolia L.) has circumboreal distribution. It inhabits nutrient-poor, moist and sunny areas such as peat bogs and wetlands. Sundew leaves are collected from the wild-type for various medicinal preparations and can be utilized in treating e.g., as an important "cough-medicine" for different respiratory diseases. The antimicrobial activity of extracts of aerial parts against various bacteria has been investigated. Drosera produces

  16. Nomenclature of inorganic compounds. Principles and examples

    This text-book consist of eighteen parts: (1) Classification and nomenclature of elements; (2) Classification and nomenclature of chemical compounds; (3) Nomenclature systems; (4) Classification of chemical formulas; (5) Codified numerical prefixes; (6) General principles of nomenclature; (7) Binary compounds; (8) Neutral and cationic atomic groups terminated with -YL; (9) Acids; (10) Polynuclear acids; (11) Double salts and mixed forms of oxides and hydroxides; (12) Adducts; (13) Intermetallic compounds; (14) Isotopically modified compounds; (15) Coordination compounds; (16) Organometallic compounds and their derivatives; (17) Appendixes; (18) Used and recommended literature. This text-book is assigned for university students of the chemistry and related sciences.

  17. Nitrogen Compounds in Radiation Chemistry

    Water radiolysis in presence of N2 is probably the topic the most controversy in the field of water radiolysis. It still exists a strong discrepancy between the different reports of ammonia formation by water radiolysis in presence of N2 and moreover in absence of oxygen there is no agreement on the formation or not of nitrogen oxide like NO2- and NO3-. These discrepancies come from multiple sources: - the complexity of the reaction mechanisms where nitrogen is involved - the experimental difficulties - and, the irradiation conditions. The aim of the workshop is to capitalize the knowledge needed to go further in simulations and understanding the problems caused (or not) by the presence of nitrogen / water in the environment of radioactive materials. Implications are evident in terms of corrosion, understanding of biological systems and atmospheric chemistry under radiation. Topics covered include experimental and theoretical approaches, application and fundamental researches: - Nitrate and Ammonia in radiation chemistry in nuclear cycle; - NOx in biological systems and atmospheric chemistry; - Formation of Nitrogen compounds in Nuclear installations; - Nitrogen in future power plant projects (Gen4, ITER...) and large particle accelerators. This document gathers the transparencies available for 7 of the presentations given at this workshop. These are: - H.E SIMS: 'Radiation Chemistry of Nitrogen Compounds in Nuclear Power Plant'; - G.R. DEY: 'Nitrogen Compounds Formation in the Radiolysis of Aqueous Solutions'; - C.E. VAUDEY et al.: 'Radiolytic corrosion of nuclear graphite studied with the dedicated gas irradiation cell of IPNL'; - J.L. BOUCHER: 'Roles and biosynthesis of NO in eukaryotes and prokaryotes'; - W.H. KOPPENOL: 'Chemistry of NOx'; - E. JANATA: 'Yield of OH in N2O saturated aqueous solution'; - V. DAUVOIS: 'Analytical strategy for the study of radiolysis gases'

  18. Aroma compounds in fresh cut pomegranate arils.

    Little published information exists regarding flavor and aroma compounds in pomegranate (Punica granatum). Although arils have fruity and sweet characteristics, we found no publications describing actual compounds responsible for their typical flavor. Since most commercial usage of pomegranates in...

  19. Potts Compound Markovian Texture Model

    Haindl, Michal; Remeš, Václav; Havlíček, Vojtěch

    Piscataway : IEEE Press, 2012, s. 29-32. ISBN 978-1-4673-2216-4. [21st International Conference on Pattern Recognition (ICPR 2012). Tsukuba (JP), 11.11.2012-15.11.2012] R&D Projects: GA ČR GAP103/11/0335; GA ČR GA102/08/0593 Grant ostatní: CESNET(CZ) 409/2011 Institutional support: RVO:67985556 Keywords : texture * Markov random field Subject RIV: BD - Theory of Information http://library.utia.cas.cz/separaty/2012/RO/haindl-potts compound markov ian texture model.pdf

  20. Thermodynamic data of intermetallic compounds

    The data are presented in the alphabetical order of the chemical symbol for the elements. Each table presents the data of a group of binary intermetallic compounds with a common first component. For example, Table 1 shows the data of all binaries of silver. The table lists the properties indicated. For completeness, the experimental methods used in obtaining the data are also listed in the remarks column. The units are kJ mol-1 for all energy quantities and J K-1 mol-1 for entropies. (author)

  1. Hydrogen storage in molecular compounds

    Mao, Wendy L.; Mao, Ho-kwang

    2004-01-01

    At low temperature (T) and high pressure (P), gas molecules can be held in ice cages to form crystalline molecular compounds that may have application for energy storage. We synthesized a hydrogen clathrate hydrate, H2(H2O)2, that holds 50 g/liter hydrogen by volume or 5.3 wt %. The clathrate, synthesized at 200–300 MPa and 240–249 K, can be preserved to ambient P at 77 K. The stored hydrogen is released when the clathrate is warmed to 140 K at ambient P. Low T also stabilizes other molecular...

  2. BTF Potts compound texture model

    Haindl, Michal; Remeš, Václav; Havlíček, Vojtěch

    Bellingham: SPIE-IS&T, 2015, 939807-1-939807-11. (Proceedings of SPIE. 9398). ISBN 978-1-62841-488-2. ISSN 0277-786X. [Electronic Imaging 2015. San Francisco (US), 08.02.2015-12.02.2015] R&D Projects: GA ČR(CZ) GA14-10911S; GA ČR(CZ) GA14-02652S Keywords : Texture * texture synthesis * compound Markov random field model * CAR model * Potts MRF * Voronoi mosaic Subject RIV: BD - Theory of Information http://library.utia.cas.cz/separaty/21015/RO/haindl-0443580.pdf

  3. Volatile organic compound sensor system

    Schabron, John F. (Laramie, WY); Rovani, Jr., Joseph F. (Laramie, WY); Bomstad, Theresa M. (Waxahachie, TX); Sorini-Wong, Susan S. (Laramie, WY); Wong, Gregory K. (Laramie, WY)

    2011-03-01

    Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

  4. Two new acetylenic compounds from Asparagus officinalis.

    Li, Xue-Mei; Cai, Jin-Long; Wang, Wen-Xiang; Ai, Hong-Lian; Mao, Zi-Chao

    2016-01-01

    Two new acetylenic compounds, asparoffins A (1) and B (2), together with two known compounds, nyasol (3) and 3″-methoxynyasol (4), were isolated from stems of Asparagus officinalis. The structures of two new compounds were elucidated on the basis of detailed spectroscopic analyses (UV, IR, MS, 1D, and 2D NMR). All compounds were evaluated for their cytotoxicities against three human cancer cell lines. PMID:26558641

  5. Semiconducting compounds and devices incorporating same

    Marks, Tobin J.; Facchetti, Antonio; Boudreault, Pierre-Luc; Miyauchi, Hiroyuki

    2016-01-19

    Disclosed are molecular and polymeric compounds having desirable properties as semiconducting materials. Such compounds can exhibit desirable electronic properties and possess processing advantages including solution-processability and/or good stability. Organic transistor and photovoltaic devices incorporating the present compounds as the active layer exhibit good device performance.

  6. Low-molecular compounds of erythrocytes

    O. O. Sorochan

    2006-01-01

    Full Text Available Glucose and free amino acids levels in rats’ blood plasma and erythrocytes hemolysate under carcinoma Geuren Т8 development as well as after introduction of Rhenium (III and сys-Platinum compounds were studied. The complex Rhenium (III compounds with organic ligands act as antioxidant and normalize the concentration of low-molecular compounds in erythrocytes under the carcinogenesis.

  7. Five new bioactive compounds from Chenopodium ambrosioides.

    Song, Kun; Zhang, Jian; Zhang, Peng; Wang, Hong-Qing; Liu, Chao; Li, Bao-Ming; Kang, Jie; Chen, Ruo-Yun

    2015-05-01

    Five new bioactive compounds, chenopodiumamines A-D (1-4) and chenopodiumoside A (5), were isolated from the ethanol extract of Chenopodium ambrosioides. The structures of these compounds were elucidated by various spectroscopic means (UV, IR, HR-ESI-MS, 1D and 2D NMR). Compounds 1-3 had moderate antioxidant and anti-inflammatory activities. PMID:26001043

  8. Superconductivity in graphite intercalation compounds

    Smith, Robert P. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Weller, Thomas E.; Howard, Christopher A. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Dean, Mark P.M. [Department of Condensed Matter Physics and Materials Science, Brookhaven National Laboratory, Upton, NY 11973 (United States); Rahnejat, Kaveh C. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Saxena, Siddharth S. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Ellerby, Mark, E-mail: mark.ellerby@ucl.ac.uk [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom)

    2015-07-15

    Highlights: • Historical background of graphite intercalates. • Superconductivity in graphite intercalates and its place in the field of superconductivity. • Recent developments. • Relevant modeling of superconductivity in graphite intercalates. • Interpretations that pertain and questions that remain. - Abstract: The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC{sub 6} and YbC{sub 6} in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.

  9. Superconductivity in graphite intercalation compounds

    Highlights: • Historical background of graphite intercalates. • Superconductivity in graphite intercalates and its place in the field of superconductivity. • Recent developments. • Relevant modeling of superconductivity in graphite intercalates. • Interpretations that pertain and questions that remain. - Abstract: The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC6 and YbC6 in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition

  10. Latent IBP Compound Dirichlet Allocation.

    Archambeau, Cedric; Lakshminarayanan, Balaji; Bouchard, Guillaume

    2015-02-01

    We introduce the four-parameter IBP compound Dirichlet process (ICDP), a stochastic process that generates sparse non-negative vectors with potentially an unbounded number of entries. If we repeatedly sample from the ICDP we can generate sparse matrices with an infinite number of columns and power-law characteristics. We apply the four-parameter ICDP to sparse nonparametric topic modelling to account for the very large number of topics present in large text corpora and the power-law distribution of the vocabulary of natural languages. The model, which we call latent IBP compound Dirichlet allocation (LIDA), allows for power-law distributions, both, in the number of topics summarising the documents and in the number of words defining each topic. It can be interpreted as a sparse variant of the hierarchical Pitman-Yor process when applied to topic modelling. We derive an efficient and simple collapsed Gibbs sampler closely related to the collapsed Gibbs sampler of latent Dirichlet allocation (LDA), making the model applicable in a wide range of domains. Our nonparametric Bayesian topic model compares favourably to the widely used hierarchical Dirichlet process and its heavy tailed version, the hierarchical Pitman-Yor process, on benchmark corpora. Experiments demonstrate that accounting for the power-distribution of real data is beneficial and that sparsity provides more interpretable results. PMID:26353244

  11. Prebiotic Evolution of Nitrogen Compounds

    Arrhenius, G.

    1999-01-01

    Support from this four year grant has funded our research on two general problems. One involves attempts to model the abiotic formation of simple source compounds for functional biomolecules, their concentration from dilute state in the hydrosphere and, in several cases, surface induced reactions to form precursor monomers for bioactive end products (refs. 1-5). Because of the pervasiveness and antiquity of phosphate based biochemistry and the catalytic activity of RNA we have exploring the hypothesis of an RNA World as an early stage in the emergence of life. This concept is now rather generally considered, but has been questioned due to the earlier lack of an experimentally demonstrated successful scheme for the spontaneous formation of ribose phosphate, the key backbone molecule in RNA. That impediment has now been removed. This has been achieved by demonstrating probable sources of activated (condensed) highly soluble and strongly sorbed phosphates in nature (Refs. 1,2) and effective condensation of aldehyde phosphates to form ribose phosphate in high yield (ref.6), thereby placing the RNA World concept on a somewhat safer experimental footing. Like all work in this field these experiments are oversimplifications that largely ignore competing side reactions with other compounds expected to be present. None the less our choice of experimental conditions aim at selective processes that eliminate interfering reactions. We have also sought to narrow the credibility gap by simulating geophysically and geochemically plausible conditions surrounding the putative prebiotic reactions.

  12. Corrosion Preventive Compounds Lifetime Testing

    Hale, Stephanie M.; Kammerer, Catherine C.; Copp, Tracy L.

    2007-01-01

    Lifetime Testing of Corrosion Preventive Compounds (CPCs) was performed to quantify performance in the various environments to which the Space Shuttle Orbiter is exposed during a flight cycle. Three CPCs are approved for use on the Orbiter: RD Calcium Grease, Dinitrol AV-30, and Braycote 601 EF. These CPCs have been rigorously tested to prove that they mitigate corrosion in typical environments, but little information is available on how they perform in the unique combination of the coastal environment at the launch pad, the vacuum of low-earth orbit, and the extreme heat of reentry. Currently, there is no lifetime or reapplication schedule established for these compounds that is based on this combination of environmental conditions. Aluminum 2024 coupons were coated with the three CPCs and exposed to conditions that simulate the environments to which the Orbiter is exposed. Uncoated Aluminum 2024 coupons were exposed to the environmental conditions as a control. Visual inspection and Electro- Impedance Spectroscopy (EIS) were performed on the samples in order to determine the effectiveness of the CPCs. The samples were processed through five mission life cycles or until the visual inspection revealed the initiation of corrosion and EIS indicated severe degradation of the coating.

  13. INSENSITIVE HIGH-NITROGEN COMPOUNDS

    D. CHAVEZ; ET AL

    2001-03-01

    The conventional approach to developing energetic molecules is to chemically place one or more nitro groups onto a carbon skeleton, which is why the term ''nitration'' is synonymous to explosives preparation. The nitro group carries the oxygen that reacts with the skeletal carbon and hydrogen fuels, which in turn produces the heat and gaseous reaction products necessary for driving an explosive shock. These nitro-containing energetic molecules typically have heats of formation near zero and therefore most of the released energy is derived from the combustion process. Our investigation of the tetrazine, furazan and tetrazole ring systems has offered a different approach to explosives development, where a significant amount of the chemical potential energy is derived from their large positive heats of formation. Because these compounds often contain a large percentage of nitrogen atoms, they are usually regarded as high-nitrogen fuels or explosives. A general artifact of these high-nitrogen compounds is that they are less sensitive to initiation (e.g. by impact) when compared to traditional nitro-containing explosives of similar performances. Using the precursor, 3,6-bis-(3,5-dimethylpyrazol-1-yl)-s-tetrazine, several useful energetic compounds based on the s-tetrazine system have been synthesized and studied. Some of the first compounds are 3,6-diamino-s-tetrazine-1,4-dioxide (LAX-112) and 3,6-dihydrazino-s-tetrazine (DHT). LAX-112 was once extensively studied as an insensitive explosive by Los Alamos; DHT is an example of a high-nitrogen explosive that relies entirely on its heat of formation for sustaining a detonation. Recent synthesis efforts have yielded an azo-s-tetrazine, 3,3'-azobis(6-amino-s-tetrazine) or DAAT, which has a very high positive heat of formation. The compounds, 4,4'-diamino-3,3'-azoxyfurazan (DAAF) and 4,4'-diamino-3,3'-azofurazan (DAAzF), may have important future roles in insensitive explosive

  14. Generation of Single, Monodisperse Compound Droplets

    Black, James

    2010-01-01

    The generation of single, monodisperse compound droplets is shown in these fluid dynamics videos. In an apparatus designed to produce single compound droplets, a piezoelectric diaphragm generates a pressure pulse from a voltage waveform input to eject a droplet. In the method presented, oil is allowed to flow into the water nozzle with the pressure pulse ejecting both fluids as a compound droplet. Experiments were performed to demonstrate how changes in water pressure affect compound droplet compositions. It was found that increasing the water pressure decreased the thickness of the compound droplet's oil layer.

  15. English Compounds and Russian Relational Adjectives

    Mezhevich, Ilana

    2004-01-01

    English noun-noun compounds are often translated into Russian as relational adjective-noun constructions with the adjective parallel in function to the non-head noun of a compound. However, a large subclass of English compounds which are sometimes referred to as ‘deverbal’ do not have a relational adjective-noun equivalent in Russian. In deverbal compounds (e.g. van driver), as opposed to so-called ‘root’ compounds (e.g. bookstore), the head noun is derived from a verb and the non-head nou...

  16. Diffusion mechanisms in intermetallic compounds

    Larikov, L.N. (ANU, Inst. Metallofiziki, Kiev (Ukraine))

    1992-08-01

    Recent research aimed at the identification of the principal mechanisms of diffusion in intermetallics is reviewed. In particular, attention is given to the effect of the type of interatomic bond on the contribution of different mechanisms to diffusion in ordered metallic compounds. Results of an analysis of experimental determinations of diffusion coefficients D(A) and D(B) in binary intermetallics (CuZn, Cu3Sn, AuCd, AgZn, AgMg, InSb, GaSb, AlSb, Fe3Al, FeAl, FeAl3, Ni3Al, Ni3Nb, FeSn, FeSn2, Ni3Sn2, Ni3Sn4, Co3Sn2, CoSn, CoSn2, and CoGa) are presented, and it is shown that the D(A)/D(B) ratio differs substantially for different diffusion mechanisms. 60 refs.

  17. The formation of new compounds

    Gasparoli, A.

    1998-08-01

    Full Text Available The formation of new compounds The study of model systems allows us to reconstruct the complex mosaic of reactions which make up the frying process. In particular such systems, if made up of single oils or their components, verify the transformation of the triglyceride matrix by thermo-oxidizing treatment. Should this then have added specific substrates (protein, starch they reconstruct the oil-substrate interaction and the influence of the same substrate in the transformation. The contribution of the information is equally distributed between the volatile products and the complex products; in fact both contribute to indicate the reactions in play, supporting the previous considerations for investigation at an analytical level. The present work discusses the newly formed products (volatile or nonvolatile, verifying in particular the formation of reaction products with the substrates.

  18. GRAPE, System for Pre-compound and Compound Nuclear Reactions

    1 - Description of program or function: The GRAPE code system for the calculation of pre-compound and compound nuclear reactions. The main code in this system is GRYPHON. The statistical exciton model following the master-equation approach has been improved and extended for application as an evaluation tool of double- differential reaction cross sections at incident nucleon energies of 5 to 50 MeV. For this purpose the code system GRAPE has been developed, which combines a number of interesting features such as: unified treatment of pre-equilibrium and equilibrium processes, renormalized exciton state-densities summing up to the back-shifted Fermi-gas formula, a new model for the internal transition rates based upon the nucleon mean free path in nuclear matter, angle-energy distributions based on intra-nuclear scattering in nuclear matter, account of discrete-level excitations, a new model for gamma-ray competition, inclusion of multi-particle emission, and various sorting options with code output in the new ENDF-VI format. An important characteristic of the proposed model is that consistency with equilibrium models has been demanded for the summed exciton-state densities as well as for the particle and gamma-ray emission cross sections. Consistency with the adopted state densities has also been imposed upon the internal transition rates. A survey of the theory is given and structure of the GRYPHON code is described. This report also contains a user' manual for GRYPHON. 2 - Method of solution: The master equations are solved with a fast algorithm, without approximations. 3 - Restrictions on the complexity of the problem: - exciton model without spin-parity conservation; - incoming or outgoing particles: a, p, alpha, 3He, d, t, and gamma-rays; - the code has been tested for incoming neutrons only; - not more than 5 multi-particle emissions; - not more than 100 energy points (variable grid); - no calculation of full gamma-ray cascade; - maximum energy of composite

  19. High-Strength, Superelastic Compounds

    Stanford, Malcolm; Noebe, Ronald; Dellacorte, Christopher; Bigelow, Glen; Thomas, Fransua

    2013-01-01

    In a previous disclosure, the use of 60- NiTiNOL, an ordered intermetallic compound composed of 60 weight percent nickel and 40 weight percent titanium, was investigated as a material for advanced aerospace bearings due to its unique combination of physical properties. Lessons learned during the development of applications for this material have led to the discovery that, with the addition of a ternary element, the resulting material can be thermally processed at a lower temperature to attain the same desirable hardness level as the original material. Processing at a lower temperature is beneficial, not only because it reduces processing costs from energy consumption, but because it also significantly reduces the possibility of quench cracking and thermal distortion, which have been problematic with the original material. A family of ternary substitutions has been identified, including Hf and Zr in various atomic percentages with varying concentrations of Ni and Ti. In the present innovation, a ternary intermetallic compound consisting of 57.6 weight percent Ni, 39.2 weight percent Ti, and 3.2 weight percent Hf (54Ni-45Ti-1Hf atomic percent) was prepared by casting. In this material, Hf substitutes for some of the Ti atoms in the material. In an alternate embodiment of the innovation, Zr, which is close in chemical behavior to Hf, is used as the substitutional element. With either substitution, the solvus temperature of the material is reduced, and lower temperatures can be used to obtain the necessary hardness values. The advantages of this innovation include the ability to solution-treat the material at a lower temperature and still achieve the required hardness for bearings (at least 50 Rockwell C) and superelastic behavior with recoverable strains greater than 2%. Most structural alloys will not return to their original shape after being deformed as little as 0.2% (a tenth of that possible with superelastic materials like 60 NiTiNOL). Because lower temperatures

  20. Organic electronic devices using phthalimide compounds

    Hassan, Azad M.; Thompson, Mark E.

    2010-09-07

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  1. Organic electronic devices using phthalimide compounds

    Hassan, Azad M.; Thompson, Mark E.

    2012-10-23

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  2. Organic electronic devices using phthalimide compounds

    Hassan, Azad M.; Thompson, Mark E.

    2013-03-19

    Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

  3. Two new compounds from Senecio cannabifolius.

    Tao, Yi; Jiang, Wei; Cheng, Yi-Yu; Zhang, Yu-Feng

    2012-01-01

    Chemical investigation of the water extracts from the Senecio cannabifolius Less. led us to find two new compounds (1 and 2), along with 12 known compounds (3-14). The two new compounds were determined as (E, 4R)-4-hydroxy-4,5,5-trimethyl-3-(3-oxobut-1-enyl)cyclohex-2-enone (1) and (E)-4-((1S, 3R, 4R)-1-hydroxy-4,5,5-trimethyl-7-oxabicyclo[4.1.0]heptan-1-yl)but-1-en-3-o-ne (2), respectively. The structures of other compounds were elucidated by extensive analysis of spectral data and in comparison with the literature values. Compounds 1 and 2 were evaluated for inhibitory activity against lipopolysaccharide-induced NO production in RAW 264.7 macrophages, and compound 1 showed potent inhibitory activity with IC(50) value of 30.65 μM. PMID:22873286

  4. Compound cryopump for fusion reactors

    Kovari, M; Shephard, T

    2013-01-01

    We reconsider an old idea: a three-stage compound cryopump for use in fusion reactors such as DEMO. The helium "ash" is adsorbed on a 4.5 K charcoal-coated surface, while deuterium and tritium are adsorbed at 15-22 K on a second charcoal-coated surface. The helium is released by raising the first surface to ~30 K. In a separate regeneration step, deuterium and tritium are released at ~110 K. In this way, the helium can be pre-separated from other species. In the simplest design, all three stages are in the same vessel, with a single valve to close the pump off from the tokamak during regeneration. In an alternative design, the three stages are in separate vessels, connected by valves, allowing the stages to regenerate without interfering with each other. The inclusion of the intermediate stage would not affect the overall pumping speed significantly. The downstream exhaust processing system could be scaled down, as much of the deuterium and tritium could be returned directly to the reactor. This could reduce ...

  5. Technetium complexation by macrocyclic compounds

    Research in nuclear medicine are directed towards the labelling of biological molecules, however, sup(99m)Tc does not show sufficient affinity for these molecules. The aim of this study was to evaluate the ability of macrocyclic compounds to bind strongly technetium in order to be used as complexation intermediate. The reducing agents used were a stannous complex and sodium dithionite. Cryptates and polyesters are not good complexing agents. They form two complexes: a 2:1 sandwich complex or 3:2 and a 1:1 complex. Cyclams are good complexing agents for technetium their complexations strength was determined by competition with pyrophosphate, gluconate and DTPA. Using the method of ligand exchange, the oxidation state of technetium in the Tc-cyclam complex was IV or V. They are 1:1 cationic complexes, the complex charge is +1. The biodistribution in rats of labelling solutions containing (cyclam 14 ane N4) C12H25 shows a good urinary excretion without intoxication risks

  6. Novel Marine Compounds: Anticancer or Genotoxic?

    Arif, Jamal M.; Al-Hazzani, Amal A.; Muhammed Kunhi; Fahad Al-Khodairy

    2004-01-01

    In the past several decades, marine organisms have generously gifted to the pharmaceutical industries numerous naturally bioactive compounds with antiviral, antibacterial, antimalarial, anti-inflammatory, antioxidant, and anticancer potentials. But till date only few anticancer drugs (cytarabine, vidarabine) have been commercially developed from marine compounds while several others are currently in different clinical trials. Majority of these compounds were tested in the tumor xenograft mode...

  7. Determination of volatile compounds of pine honeys

    SİLİCİ, Sibel

    2011-01-01

    The volatile compounds of 13 Turkish pine (Pinus brutia Ten.) honey samples were characterized by solid phase microextraction (SPME) analysis, followed by gas chromatography-mass spectrometry (GC-MS) analysis. A total of 42 volatile compounds were identified, but volatile compounds such as nonana1, benzene, 4-hexen-3-ol, alpha-pinene, and 2-heptanone were recognized to be specific floral origin markers of the pine honey. The SPME extraction method was proposed as an alternative way to carry o...

  8. Phenolic Compounds and Uses in Fruit Growing

    Sulusoglu, Melekber

    2014-01-01

    Phenolic compounds are a class of chemical compounds in organic chemistry which consist of a hydroxyl group directly bonded to an aromatic hydrocarbon group. Phenolic compounds find in cell wall structures and play a major role in the growth regulation of plant as an internal physiological regulators or chemical messengers. They are used in the fruit growing field. They are related with defending system against pathogens and stress. They increase the success of tissue culture; can be helpful ...

  9. Method for the detection of aquaretic compounds

    2003-01-01

    Disclosed is a method for detecting an aquaretic compound. In one embodiment, the method includes administering to a mammal a candidate compound that modulates a nociceptin receptor. Biological material is isolated from the mammal and expression of aquaporin-2 is measured. Modulation of the...... aquaporin-2 is taken to be indicative of a candidate compound having aquaretic activity. The invention has a wide spectrum of uses including helping to identify new diuretics that spare unwanted loss of sodium and potassium ions....

  10. Antibacterial and Antifungal Compounds from Marine Fungi

    Lijian Xu; Wei Meng; Cong Cao; Jian Wang; Wenjun Shan; Qinggui Wang

    2015-01-01

    This paper reviews 116 new compounds with antifungal or antibacterial activities as well as 169 other known antimicrobial compounds, with a specific focus on January 2010 through March 2015. Furthermore, the phylogeny of the fungi producing these antibacterial or antifungal compounds was analyzed. The new methods used to isolate marine fungi that possess antibacterial or antifungal activities as well as the relationship between structure and activity are shown in this review.

  11. Hydrodesulfurization catalysis by Chevrel phase compounds

    McCarty, Kevin F.; Schrader, Glenn L.

    1985-12-24

    A process is disclosed for the hydrodesulfurization of sulfur-containing hydrocarbon fuel with reduced ternary molybdenum sulfides, known as Chevrel phase compounds. Chevrel phase compounds of the general composition M.sub.x Mo.sub.6 S.sub.8, with M being Ho, Pb, Sn, Ag, In, Cu, Fe, Ni, or Co, were found to have hydrodesulfurization activities comparable to model unpromoted and cobalt-promoted MoS.sub.2 catalysts. The most active catalysts were the "large" cation compounds (Ho, Pb, Sn), and the least active catalysts were the "small" cation compounds (Cu, Fe, Ni, Co.).

  12. Microbial growth on C1 compounds: proceedings

    This book contains individual papers prepared for the 4th International Symposium on Microbial Growth on One Carbon Compounds. Individual reports were abstracted and indexed for EDB. Topics presented were in the areas of the physiology and biochemistry of autotraps, physiology and biochemistry of methylotrophs and methanotrops, physiology and biochemistry of methanogens, genetics of microbes that use C1 compounds, taxonomy and ecology of microbes tht grow on C1 compounds, applied aspects of microbes that grow on C1 compounds, and new directions in C1 metabolism. (DT)

  13. Potent antifouling compounds produced by marine Streptomyces

    Xu, Ying

    2010-02-01

    Biofouling causes huge economic loss and a recent global ban on organotin compounds as antifouling agents has increased the need for safe and effective antifouling compounds. Five structurally similar compounds were isolated from the crude extract of a marine Streptomyces strain obtained from deep-sea sediments. Antifouling activities of these five compounds and four other structurally-related compounds isolated from a North Sea Streptomyces strain against major fouling organisms were compared to probe structure-activity relationships of compounds. The functional moiety responsible for antifouling activity lies in the 2-furanone ring and that the lipophilicity of compounds substantially affects their antifouling activities. Based on these findings, a compound with a straight alkyl side-chain was synthesized and proved itself as a very effective non-toxic, anti-larval settlement agent against three major fouling organisms. The strong antifouling activity, relatively low toxicity, and simple structures of these compounds make them promising candidates for new antifouling additives. © 2009 Elsevier Ltd. All rights reserved.

  14. Technetium compounds and their field of application

    This chapter reviews the different applications of technetium and technetium compounds in catalysis, corrosion inhibition, superconductivity of technetium alloys, diagnostic techniques, radioisotope generators and radiopharmaceuticals. 649 refs

  15. Antimicrobial Action of Compounds from Marine Seaweed

    María José Pérez

    2016-03-01

    Full Text Available Seaweed produces metabolites aiding in the protection against different environmental stresses. These compounds show antiviral, antiprotozoal, antifungal, and antibacterial properties. Macroalgae can be cultured in high volumes and would represent an attractive source of potential compounds useful for unconventional drugs able to control new diseases or multiresistant strains of pathogenic microorganisms. The substances isolated from green, brown and red algae showing potent antimicrobial activity belong to polysaccharides, fatty acids, phlorotannins, pigments, lectins, alkaloids, terpenoids and halogenated compounds. This review presents the major compounds found in macroalga showing antimicrobial activities and their most promising applications.

  16. Antimicrobial Action of Compounds from Marine Seaweed.

    Pérez, María José; Falqué, Elena; Domínguez, Herminia

    2016-03-01

    Seaweed produces metabolites aiding in the protection against different environmental stresses. These compounds show antiviral, antiprotozoal, antifungal, and antibacterial properties. Macroalgae can be cultured in high volumes and would represent an attractive source of potential compounds useful for unconventional drugs able to control new diseases or multiresistant strains of pathogenic microorganisms. The substances isolated from green, brown and red algae showing potent antimicrobial activity belong to polysaccharides, fatty acids, phlorotannins, pigments, lectins, alkaloids, terpenoids and halogenated compounds. This review presents the major compounds found in macroalga showing antimicrobial activities and their most promising applications. PMID:27005637

  17. CHARACTERIZATION OF RUTIN-CYCLODEXTRIN INCLUSION COMPOUNDS

    Andreia Corciovă

    2011-12-01

    Full Text Available The objectives of this study were to examine the potential of beta-cyclodextrin to improve the solubility of rutin and obtain inclusion compounds that were analyzed by different techniques: UV-Vis, IR spectroscopy, thermal analysis. The presence of β-cyclodextrin raises the content of rutin in water. The inclusion compounds were prepared by dry mixing, complexation in semisolid and liquid medium in 1:2 molar ratio rutin - β-cyclodextrin. The UV-Vis and IR analysis demonstrated the obtaining of inclusion compounds and the thermal analysis show that these compounds are more stable than the parent substance.

  18. A Probabilistic Model of Compound Nouns

    Lauer, M; Lauer, Mark; Dras, Mark

    1994-01-01

    Compound nouns such as example noun compound are becoming more common in natural language and pose a number of difficult problems for NLP systems, notably increasing the complexity of parsing. In this paper we develop a probabilistic model for syntactically analysing such compounds. The model predicts compound noun structures based on knowledge of affinities between nouns, which can be acquired from a corpus. Problems inherent in this corpus-based approach are addressed: data sparseness is overcome by the use of semantically motivated word classes and sense ambiguity is explicitly handled in the model. An implementation based on this model is described in Lauer (1994) and correctly parses 77% of the test set.

  19. Automated compound classification using a chemical ontology

    Bobach Claudia

    2012-12-01

    Full Text Available Abstract Background Classification of chemical compounds into compound classes by using structure derived descriptors is a well-established method to aid the evaluation and abstraction of compound properties in chemical compound databases. MeSH and recently ChEBI are examples of chemical ontologies that provide a hierarchical classification of compounds into general compound classes of biological interest based on their structural as well as property or use features. In these ontologies, compounds have been assigned manually to their respective classes. However, with the ever increasing possibilities to extract new compounds from text documents using name-to-structure tools and considering the large number of compounds deposited in databases, automated and comprehensive chemical classification methods are needed to avoid the error prone and time consuming manual classification of compounds. Results In the present work we implement principles and methods to construct a chemical ontology of classes that shall support the automated, high-quality compound classification in chemical databases or text documents. While SMARTS expressions have already been used to define chemical structure class concepts, in the present work we have extended the expressive power of such class definitions by expanding their structure-based reasoning logic. Thus, to achieve the required precision and granularity of chemical class definitions, sets of SMARTS class definitions are connected by OR and NOT logical operators. In addition, AND logic has been implemented to allow the concomitant use of flexible atom lists and stereochemistry definitions. The resulting chemical ontology is a multi-hierarchical taxonomy of concept nodes connected by directed, transitive relationships. Conclusions A proposal for a rule based definition of chemical classes has been made that allows to define chemical compound classes more precisely than before. The proposed structure-based reasoning

  20. A Method for Synthetic Aperture Compounding

    Hansen, Jens Munk; Jensen, Jørgen Arendt

    2010-01-01

    An approach to perform ultrasound spatial compounding using synthetic aperture data is proposed. The approach allows compounding to be performed for any number of directions without reducing the frame rate or temporal resolution. It is demonstrated how the contrast is improved by compounding and...... obtained when using 5 images. Using the same RF data, a synthetic aperture image without compounding reveals a CNR of -0.36, -0.93, -1.23, and -1.61 dB for the four cysts, respectively....

  1. Investigations on organogermanium compounds XII. Reactions of trialkylgermylalkalimetal compounds in hexamethylphosphoric triamide (HMPT) with some inorganic and organic compounds

    Bulten, E.J.; Noltes, J.G.

    1971-01-01

    Trialkylgermyl alkali metal compounds in HMPT have been found to be highly reactive nucleophiles. Reactions with some inorganic and organic compounds, such as oxygen, carbon dioxide, inorganic and orgaanic halides, aldehydes, ketones, epoxides and lactones are described. Several new carbon-functiona

  2. Bis(1,3-dithiole) Compounds

    Andersen, Jan Rud; Engler, E. M.; Green, D. C.; Patel, V. V.

    1977-01-01

    There is described the preparation of bis-1,3-dithiole compounds (I) which are key synthetic precursors for the preparation of new polymeric metal bis(dithiolene) (i.e., II) and tetrathiafulvalene compounds (i.e., III): (Image Omitted)...

  3. Intercalation Compounds of Barium and Strontium Phenylphosphonate

    Beneš, L.; Melánová, Klára; Svoboda, Jan; Zima, Vítězslav; Růžička, A.

    Pardubice : Institute of Macromolecular Chemistry AS CR, 2011. s. 172. ISBN 978-80-85009-66-8. [16th International Symposium on Intercalation Compounds. 23.05.2011-26.05.2011, Seč] Institutional research plan: CEZ:AV0Z40500505 Keywords : intercalates * layered compounds * structure Subject RIV: CA - Inorganic Chemistry

  4. Organic halogen compounds in the environment

    There are 20 research reports on selected problems concerning the analysis, the occurence, and the behaviour of a wide spectrum of organic halogen compounds. The work was carried out in the framework of the project 'Organic Halogen Compounds in the Environment', financed by the BMFT, between 1975 and 1978. (orig.)

  5. Performance of BNL-TSTA compound cryopump

    A compound cryopump using cryocondensation pumping for hydrogen isotopes and cryosorption pumping with coconut charcoal as adsorbent for helium was designed. This compound cryopump was subsequently built (by Janis Research, Stoneham, MA) and has been tested at Brookhaven, fulfilling the design requirements and are delivered to Tritium Systems Test Assembly (TSTA) Vacuum Facility at Los Alamos Scientific Laboratory (LASL) for on-line operations

  6. Improvements in or relating to compounds

    The invention provides a process for the preparation of a dispersible product containing a cerium compound which comprises heating a cerium (IV) oxide hydrate in the presence of a salt to cause deaggregation of aggregated crystallites in the cerium (IV) oxide hydrate and produce a dispersible product containing a cerium compound. (author)

  7. Lattice anisotropy in uranium ternary compounds

    Maskova, S.; Adamska, A.M.; Havela, L.;

    2012-01-01

    Several U-based intermetallic compounds (UCoGe, UNiGe with the TiNiSi structure type and UNiAl with the ZrNiAl structure type) and their hydrides were studied from the point of view of compressibility and thermal expansion. Confronted with existing data for the compounds with the ZrNiAl structure...

  8. Volatile organic compound emissions from silage systems

    As a precursor to smog, emission of volatile organic compounds (VOCs) to the atmosphere is an environmental concern in some regions. The major source from farms is silage, with emissions coming from the silo face, mixing wagon, and feed bunk. The major compounds emitted are alcohols with other impor...

  9. Use of Polyphenolic Compounds in Dermatologic Oncology.

    Costa, Adilson; Bonner, Michael Yi; Arbiser, Jack L

    2016-08-01

    Polyphenols are a widely used class of compounds in dermatology. While phenol itself, the most basic member of the phenol family, is chemically synthesized, most polyphenolic compounds are found in plants and form part of their defense mechanism against decomposition. Polyphenolic compounds, which include phenolic acids, flavonoids, stilbenes, and lignans, play an integral role in preventing the attack on plants by bacteria and fungi, as well as serving as cross-links in plant polymers. There is also mounting evidence that polyphenolic compounds play an important role in human health as well. One of the most important benefits, which puts them in the spotlight of current studies, is their antitumor profile. Some of these polyphenolic compounds have already presented promising results in either in vitro or in vivo studies for non-melanoma skin cancer and melanoma. These compounds act on several biomolecular pathways including cell division cycle arrest, autophagy, and apoptosis. Indeed, such natural compounds may be of potential for both preventive and therapeutic fields of cancer. This review evaluates the existing scientific literature in order to provide support for new research opportunities using polyphenolic compounds in oncodermatology. PMID:27164914

  10. Compound for consolidating particulate materials. [French patent

    Van Blaricom, L.E.; Deweyert, H.R.; Smith, N.H.

    1969-03-10

    This compound consists of a sulfonated polyphenolic material extracted from the bark of coniferous trees and/or quebracho wood, a water-soluble bichromate, and borax. The aqueous compound with a pH of 8 to 10.5 is mixed with solid particulate materials, such as earth, sand or gravel.

  11. Chalcones: compounds possessing a diversity in applications

    Urmila Berar

    2012-01-01

    Chalcones are a class of α, β- unsaturated carbonyl compounds that form the central core for a variety of naturally occurring biologically active compounds. They exhibit tremendous potential to act as a pharmacological agent. Besides their various pharmacological activities, chalcones have been explored for different optical applications including second harmonic generation materials in non- linear optics, fluorescent probe for sensing different molecules.

  12. Magnetic properties of rare earth iron compounds

    In this thesis, a study is made of hyperfine interactions in the intermetallic compounds Rsub(x)Fesub(y) (R = rare earth, Y or Th) by using the Moessbauer effect in the 57Fe nucleus. The hyperfine interactions in two series of Rsub(x)Fesub(y) compounds, for which Ysub(x)Fesub(y) and Ersub(x)Fesub(y) were chosen, are studied. Thus a comparison can be made between the magnetic properties of compounds with diamagnetic yttrium and ferromagnetic erbium, respectively. In addition, the magnetic anisotropy of these compounds Ysub(x)Fesub(y) and Ersub(x)Fesub(y) has been investigated. The major part of this thesis concerns a study of the R2Fe17 intermetallic compounds. Since Co or Ni substitution for Fe in R2Fe17 compounds results in a fast increase of the Curie temperature, some pseudobinary R2Fesub(17-x)Msub(x) compounds with R = Tm and Er and M = Co and Ni, have been investigated. ThFe5 has been studied, since it is the only known existing RFe5 compound with a crystal structure which is closely related to that of Th2Fe17

  13. Hybrid Compounding in New Zealand English

    Degani, Marta; Onysko, Alexander

    2010-01-01

    This study investigates hybrid compound formation of Maori and English terms in present day New Zealand English (NZE). On the background of Maori and English language contact, the phenomenon of hybrid compounding emerges as a process that, on the one hand, symbolizes the vitality of the Maori element in NZE and, on the other hand, marks the…

  14. Intercalated compounds of niobium and tantalum dicalcogenides

    The synthesis of niobium and tantalum lamellar compounds and its intercalated derivatives is described. The intercalated compounds with lithium, with alkaline metal and with metals of the first-row transition are studied, characterized by X-ray diffraction. (C.G.C.)

  15. Methods of making organic compounds by metathesis

    Abraham, Timothy W.; Kaido, Hiroki; Lee, Choon Woo; Pederson, Richard L.; Schrodi, Yann; Tupy, Michael John

    2015-09-01

    Described are methods of making organic compounds by metathesis chemistry. The methods of the invention are particularly useful for making industrially-important organic compounds beginning with starting compositions derived from renewable feedstocks, such as natural oils. The methods make use of a cross-metathesis step with an olefin compound to produce functionalized alkene intermediates having a pre-determined double bond position. Once isolated, the functionalized alkene intermediate can be self-metathesized or cross-metathesized (e.g., with a second functionalized alkene) to produce the desired organic compound or a precursor thereto. The method may be used to make bifunctional organic compounds, such as diacids, diesters, dicarboxylate salts, acid/esters, acid/amines, acid/alcohols, acid/aldehydes, acid/ketones, acid/halides, acid/nitriles, ester/amines, ester/alcohols, ester/aldehydes, ester/ketones, ester/halides, ester/nitriles, and the like.

  16. Microbial metabolism of organosulfur compounds in petroleum

    The microbial metabolism of a large number of hydrocarbons has been thoroughly studied and described in the literature. In contrast, much less is known about the metabolism of organosulfur compounds found in petroleum. These investigations have been hampered by the commercial unavailability of most of the sulfur compounds of interest. Some of the first studies on the biodegradation of sulfur compounds focused on their fate and removal from oil-contaminated environments. Another major area of study is the microbial process of 'biodesulfurization' which has been suggested as a means of selectively removing sulfur compounds from petroleum prior to refining. Information gathered from these two areas of research provide the basis of the present knowledge of metabolism of organosulfur compounds in petroleum. This information is reviewed with emphasis on the metabolism of dibenzothiophenes and n-alkyl tetrahydrothiophenes (n-alkyl thiolanes)

  17. Characteristic Aroma Compounds from Different Pineapple Parts

    Guang-Ming Sun

    2011-06-01

    Full Text Available Characteristic aroma volatile compounds from different parts of cayenne pineapple were analyzed by headspace-solid phase microextraction (HS-SPME and gas chromatography-mass spectrometry (GC/MS. The main volatile compounds were esters, terpenes, ketones and aldehydes. The number and content of aroma compounds detected in pulp were higher than those found in core. In pulp, the characteristic aroma compounds were ethyl 2-methylbutanoate, ethyl hexanoate, 2,5-dimethyl-4-hydroxy-3(2H-furanone (DMHF, decanal, ethyl 3-(methylthiopropionate, ethyl butanoate, and ethyl (E-3-hexenoate; while in core the main compounds were ethyl 2-methylbutanoate, ethyl hexanoate and DMHF. The highest odor units were found to correspond to ethyl 2-methylbutanoate, followed by ethyl hexanoate and DMHF. The odor units found for pulp were higher than those for core.

  18. Integrated modelling of two xenobiotic organic compounds

    Lindblom, Erik Ulfson; Gernaey, K.V.; Henze, Mogens;

    2006-01-01

    This paper presents a dynamic mathematical model that describes the fate and transport of two selected xenobiotic organic compounds (XOCs) in a simplified representation. of an integrated urban wastewater system. A simulation study, where the xenobiotics bisphenol A and pyrene are used as reference...... compounds, is carried out. Sorption and specific biological degradation processes are integrated with standardised water process models to model the fate of both compounds. Simulated mass flows of the two compounds during one dry weather day and one wet weather day are compared for realistic influent flow...... rate and concentration profiles. The wet weather day induces resuspension of stored sediments, which increases the pollutant load on the downstream system. The potential of the model to elucidate important phenomena related to origin and fate of the model compounds is demonstrated....

  19. New uranium compounds preparation and use as catalyst for hydrogenation of non-saturated organic compounds

    Preparation of new organic uranium compounds and their use as catalysts for hydrogenation of non-saturated organic compounds are described. These compounds include Uranium III, a cyclopentadienic group, an alkyl group and an acetylenic derivative C6H5C triple bonds CR fixed by a π bond. Catalysts can be prepared with depleted uanium for hydrogenation of olefins for example

  20. Thiophenic Sulfur Compounds Released During Coal Pyrolysis.

    Xing, Mengwen; Kong, Jiao; Dong, Jie; Jiao, Haili; Li, Fan

    2013-06-01

    Thiophenic sulfur compounds are released during coal gasification, carbonization, and combustion. Previous studies indicate that thiophenic sulfur compounds degrade very slowly in the environment, and are more carcinogenic than polycyclic aromatic hydrocarbons and nitrogenous compounds. Therefore, it is very important to study the principle of thiophenic sulfur compounds during coal conversion, in order to control their emission and promote clean coal utilization. To realize this goal and understand the formation mechanism of thiophenic sulfur compounds, this study focused on the release behavior of thiophenic sulfur compounds during coal pyrolysis, which is an important phase for all coal thermal conversion processes. The pyrolyzer (CDS-5250) and gas chromatography-mass spectrometry (Focus GC-DSQII) were used to analyze thiophenic sulfur compounds in situ. Several coals with different coal ranks and sulfur contents were chosen as experimental samples, and thiophenic sulfur compounds of the gas produced during pyrolysis under different temperatures and heating rates were investigated. Levels of benzothiophene and dibenzothiophene were obtained during pyrolysis at temperatures ranging from 200°C to 1300°C, and heating rates ranging from 6°C/ms to 14°C/ms and 6°C/s to 14°C/s. Moreover, the relationship between the total amount of benzothiophene and dibenzothiophene released during coal pyrolysis and the organic sulfur content in coal was also discussed. This study is beneficial for understanding the formation and control of thiophenic sulfur compounds, since it provides a series of significant results that show the impact that operation conditions and organic sulfur content in coal have on the amount and species of thiophenic sulfur compounds produced during coal pyrolysis. PMID:23781126

  1. Cytotoxic Compounds Isolated from Murraya tetramera Huang

    Chun-Xue You

    2014-08-01

    Full Text Available A new compound and seven known compounds were isolated from Murraya tetramera Huang for the first time, and they were identified with NMR and MS spectral analysis. It was confirmed that the new compound was 10-methoxy-7-methyl-2H-benzo[g]chromen-2-one (3 and the others were β-eudesmol (1, trans-3β-(1-hydroxy-1-methylethyl-8aβ-methyl-5-methylenedecalin-2-one (2, 5,7-dimethoxy-8-[(Z-3'-methyl-butan-1',3'-dienyl]coumarin (4, 7-geranyloxy-6-methoxycoumarin (5, 5,7-dimethoxy-8-(3-methyl-2-oxo-butylcoumarin (6, murrangatin acetate (7 and toddalenone (8. Furthermore, the cytotoxic activity against human lung adenocarcinoma (A549, human hepatocellular carcinoma cells (SMMC-7721, human bladder tumor cells (EJ, human cervical carcinoma cells (HeLa, and human B-lineage acute lymphoblastic leukemia 1 cells (BALL-1 was evaluated for all compounds. It was found that five of them displayed various degrees of cytotoxicity against different testing targets. Compound 1 showed significant cytotoxic activity against the five cell lines (A549, SMMC-7721, EJ, Hela and BALL-1. Compounds 2 and 5 showed significant cytotoxicity against three cell lines (A549, SMMC-7721 and BALL-1. Compound 4 showed significant cytotoxicity against three cell lines (A549, EJ and BALL-1. However, compound 3 only showed fair cytotoxicity against the BALL-1 cell line. The structure-active relationships were investigated as well. These active compounds might be potential lead compounds for the treatment of cancer.

  2. Biodegradable compounds: Rheological, mechanical and thermal properties

    Nobile, Maria Rossella; Lucia, G.; Santella, M.; Malinconico, M.; Cerruti, P.; Pantani, R.

    2015-12-01

    Recently great attention from industry has been focused on biodegradable polyesters derived from renewable resources. In particular, PLA has attracted great interest due to its high strength and high modulus and a good biocompatibility, however its brittleness and low heat distortion temperature (HDT) restrict its wide application. On the other hand, Poly(butylene succinate) (PBS) is a biodegradable polymer with a low tensile modulus but characterized by a high flexibility, excellent impact strength, good thermal and chemical resistance. In this work the two aliphatic biodegradable polyesters PBS and PLA were selected with the aim to obtain a biodegradable material for the industry of plastic cups and plates. PBS was also blended with a thermoplastic starch. Talc was also added to the compounds because of its low cost and its effectiveness in increasing the modulus and the HDT of polymers. The compounds were obtained by melt compounding in a single screw extruder and the rheological, mechanical and thermal properties were investigated. The properties of the two compounds were compared and it was found that the values of the tensile modulus and elongation at break measured for the PBS/PLA/Talc compound make it interesting for the production of disposable plates and cups. In terms of thermal resistance the compounds have HDTs high enough to contain hot food or beverages. The PLA/PBS/Talc compound can be, then, considered as biodegradable substitute for polystyrene for the production of disposable plates and cups for hot food and beverages.

  3. Phenolic compounds in Ross Sea water

    Zangrando, Roberta; Barbaro, Elena; Gambaro, Andrea; Barbante, Carlo; Corami, Fabiana; Kehrwald, Natalie; Capodaglio, Gabriele

    2016-04-01

    Phenolic compounds are semi-volatile organic compounds produced during biomass burning and lignin degradation in water. In atmospheric and paleoclimatic ice cores studies, these compounds are used as biomarkers of wood combustion and supply information on the type of combusted biomass. Phenolic compounds are therefore indicators of paleoclimatic interest. Recent studies of Antarctic aerosols highlighted that phenolic compounds in Antarctica are not exclusively attributable to biomass burning but also derive from marine sources. In order to study the marine contribution to aerosols we developed an analytical method to determine the concentration of vanillic acid, vanillin, p-coumaric acid, syringic acid, isovanillic acid, homovanillic acid, syringaldehyde, acetosyringone and acetovanillone present in dissolved and particle phases in Sea Ross waters using HPLC-MS/MS. The analytical method was validated and used to quantify phenolic compounds in 28 sea water samples collected during a 2012 Ross Sea R/V cruise. The observed compounds were vanillic acid, vanillin, acetovanillone and p-coumaric acid with concentrations in the ng/L range. Higher concentrations of analytes were present in the dissolved phase than in the particle phase. Sample concentrations were greatest in the coastal, surficial and less saline Ross Sea waters near Victoria Land.

  4. Risk and liabilities of prescribing compounded medications.

    Randell, Michael D; Duffy, Phillip J

    2014-07-01

    Complications resulting from the use of compounded medications have become a troubling trend nationwide. There is a significant potential for patients to suffer serious harm from the use of substandard medications prepared by compounding pharmacies, and the reality of this problem has been demonstrated in several well-publicized incidences of serious medical complications, including patient deaths, that directly resulted from the use of medications prepared at compounding pharmacies. Unlike US Food and Drug Administration (FDA)-approved drugs, compounded products are not required to meet evidentiary standards for establishing safety and efficacy. Moreover, these products are not held to Good Manufacturing Practices, which require regular inspections, quality control testing, and rejection of material not meeting specifications. Physicians, as well as other prescribers, need to be aware that when a patient suffers harm from using a compounded medication, those injured patients may bring negligence and malpractice claims, not only against the pharmacy and the pharmacist responsible for preparing the medication, but also against the prescribing physician and the physician’s practice. Consequently, the best way for physicians to manage professional risk and avoid both litigation and potential negative patient outcomes related to compounded pharmaceuticals is to not use these products if there is an FDA-approved product available. However, if the use of a compounded medication is medically necessary, then physicians should adhere to the FDA guidance concerning traditional compounding. Moreover, it would be prudent for any physician who intends to either resell or participate in the distribution of compounded products beyond the direct treatment of their patients to consider obtaining the appropriate insurance coverage for this activity. PMID:25276868

  5. Bioremediation of nitroaromatic and haloaromatic compounds

    Alleman, B.C.; Leeson, A.

    1999-01-01

    Sites contaminated with explosive compounds, pesticides, herbicides, PCBs, and other aromatic compounds present formidable technical, regulatory, and financial challenges. The application of bioremediatin technologies at such sites offers the promise of cost-effective site remediation that can serve as a key component of a well-formulated strategy for achieving site closure. This volume presents the results of bench-, pilot-, and field-scale projects focused on the use of biological approaches to remediate problem compounds, such as RDX, HMX, TNT, DDT, 2,4-D, nitro- and chlorobenzenes, nitroaniline, chloroaniline, hexachlorbenzene, PCPs, PCBs, and dichlorophenol in soils and groundwater.

  6. Bioremediation of nitroaromatic and haloaromatic compounds

    Alleman, B.C.; Leeson, A.

    1999-11-01

    Sites contaminated with explosive compounds, pesticides, herbicides, PCBs, and other aromatic compounds present formidable technical, regulatory, and financial challenges. The application of bioremediatin technologies at such sites offers the promise of cost-effective site remediation that can serve as a key component of a well-formulated strategy for achieving site closure. This volume presents the results of bench-, pilot-, and field-scale projects focused on the use of biological approaches to remediate problem compounds, such as RDX, HMX, TNT, DDT, 2,4-D, nitro- and chlorobenzenes, nitroaniline, chloroaniline, hexachlorbenzene, PCPs, PCBs, and dichlorophenol in soils and groundwater.

  7. Bioremediation of nitroaromatic and haloaromatic compounds

    Alleman, B.C.; Leeson, A. [eds.

    1999-10-01

    Sites contaminated with explosive compounds, pesticides, herbicides, PCBs, and other aromatic compounds present formidable technical, regulatory, and financial challenges. The application of bioremediation technologies at such sites offers the promise of cost-effective site remediation that can serve as a key component of a well-formulated strategy for achieving site closure. This volume presents the results of bench-, pilot-, and field-scale projects focused on the use of biological approaches to remediate problem compounds, such as RDX, HMX, TNT, DDT, 2,4-D, nitro- and chlorobenzenes, nitroaniline, chloroaniline, hexachlorobenzene, PCPs, PCBs, and dichlorophenol in soils and groundwater.

  8. HYDRAULICS OF COMPOUND CHANNEL WITH VEGETATED FLOODPLAINS

    2002-01-01

    Experimental researches were conducted on flood carrying capacity of compound open channels with wide and narrow floodplains as well as hydrodynamic behavior of overbank flow across vegetated floodplains. Results show that hydrodynamic behavior of compound channels with narrow floodplains is different from that of the wide floodplains. In such compound channels with narrow vegetated floodplains as in the Pearl River delta nework, it has been found that vegetated domains become really impenetrable when the length of vegetated domain is larger than Lm, the length of flow in floodplain coming into the main channel, and that the influence of vegetated floodplains upon flood stages of a channel is not very significant.

  9. Three new compounds from Cinnamomum cassia.

    He, Shan; Jiang, Yong; Tu, Peng-Fei

    2016-01-01

    Three new compounds, including two new diterpenoids, named epianhydrocinnzeylanol (1) and cinnacasiol H (2), and one hydroxylasiodiplodin, (3R,4S,6R)-4,6-dihydroxy-de-O-methyllasiodiplodin (3), together with five known diterpenoids (4-8) and two known phenolic glycosides (9-10) were isolated from the barks of Cinnamomum cassia. Their structures were elucidated by extensive spectroscopic analysis and comparison of the chemical shift values with those of related known compounds. The anti-inflammatory activities of the isolates were evaluated on nitric oxide production in lipopolysaccharide-induced BV-2 microglial cells and the compounds showed weak inhibition activities. PMID:26498626

  10. Capacity results for compound wiretap channels

    Sommerfeld, Jochen; Boche, Holger

    2011-01-01

    We derive a lower bound on the secrecy capacity of the compound wiretap channel with channel state information at the transmitter which matches the general upper bound on the secrecy capacity of general compound wiretap channels given by Liang et al. and thus establishing a full coding theorem in this case. We achieve this with a stronger secrecy criterion and with a decoder that is robust against the effect of randomisation in the encoding. This relieves us from the need of decoding the randomisation parameter which is in general not possible within this model. Moreover we prove a lower bound on the secrecy capacity of the compound wiretap channel without channel state information.

  11. Pickpocket compounds from Latin to Romance

    Whitehead, Benedicte Nielsen

    This thesis discusses the development in Proto–Indo–European, Latin and Romance of a word–formation pattern which the most adequate terminology in use dubs ‘verbal government compounds with a governing first member’; I use the shorthand ‘pickpocket compounds’. The first member of such compounds......–noun, represented by truck–driver, has the deverbal member second and carries an agentive suffix, -er. Pickpocket compounds are attested in early strata of Greek and Indo–Iranian and in medieval strata of Germanic, Slavic and Romance. Latin has around a dozen examples. The scholarly debate, continued in this thesis...

  12. Health promoting compounds in vegetables and fruits:

    Brandt, K.; Christensen, L.P.; Hansen-Møller, J.;

    2004-01-01

    Vegetables contain unknown compounds with important health promoting effect. The described project defined and tested a two-step screening procedure for identification of such compounds. Step 1 is initial screening according to three criteria: 1.1, chemically reactive functional groups; 1.......2, toxicity at high concentrations or other bioactivity; and 1.3, presence in healthy foods. Step 2 is testing for minimum criteria defining health-promoting compounds: 2.1, positive or biphasic ("hormesis") responses in bioassay; 2.2, human tissue concentrations corresponding to beneficial effects in...

  13. Chlorinated organic compounds produced by Fusarium graminearum.

    Ntushelo, Khayalethu

    2016-06-01

    Fusarium graminearum, a pathogen of wheat and maize, not only reduces grain yield and degrades quality but also produces mycotoxins in the infected grain. Focus has been on mycotoxins because of the human and animal health hazards associated with them. In addition to work done on mycotoxins, chemical profiling of F. graminearum to identify other compounds produced by this fungus remains critical. With chemical profiling of F. graminearum the entire chemistry of this fungus can be understood. The focus of this work was to identify chlorinated compounds produced by F. graminearum. Various chlorinated compounds were detected and their role in F. graminearum is yet to be understood. PMID:27165533

  14. Synthesis of Novel Antifungal Triazole Compounds

    Yong CHU; Ming Xia XU; Ding LU

    2004-01-01

    Based on our previous studies of 3D-QSAR, 38 novel objective compounds belonging to 4 series were designed and successfully synthesized directed by the idea of reconstructing the structure of non-pharmacophores while reserving essential ones in triazoles. In vitro pilot studies on their antifungal activities showed that most compounds have inhibitory effects on C.albicans and some inhibit S.cerevisiae also. The effects on C.albicans of 5 compounds are more potent than or equal to that of fluconazole or itraconazole.

  15. Allylic Nitro Compounds as Nitrite Donors

    Chakrapani, Harinath; Gorczynski, Michael J.; King, S Bruce

    2006-01-01

    Allylic nitro compounds were synthesized and evaluated as organic sources of nitrite and nitric oxide. Unactivated allylic nitro compounds do not spontaneously release nitrite and nucleophile promoted nitrite release is slow. However, 2-(nitromethyl)-cyclohex-1-ene-3-one spontaneously dissociates in buffer (pH = 7.4) to release nitrite with a kobs = 1.6 × 10−5 s−1. In the presence of L-cysteine, this compound rapidly yields nitrite and reacts with hemoglobin similarly to sodium nitrite. Struc...

  16. Expatriate Compound Living: An Ethnographic Field Study

    Lauring, Jakob; Selmer, Jan

    2009-01-01

    In certain countries, closed expatriate compounds have developed.  They serve to provide resident expatriates and accompanying family members with a comfortable and safe environment. Unfortunately, not much is known about compound life since associated empirical research is scarce. Through...... ethnographic field-work methodology, including interviews and participant observation during a period of three months, this exploratory study investigated 16 Danish business expatriates of a large Danish corporation and their families living in the same compound in Saudi Arabia. They shared their spare time...

  17. Cytotoxic Compounds Isolated from Murraya tetramera Huang

    Chun-Xue You; Kai Yang; Cheng-Fang Wang; Wen-Juan Zhang; Ying Wang; Jiao Han; Li Fan; Shu-Shan Du; Zhu-Feng Geng; Zhi-Wei Deng

    2014-01-01

    A new compound and seven known compounds were isolated from Murraya tetramera Huang for the first time, and they were identified with NMR and MS spectral analysis. It was confirmed that the new compound was 10-methoxy-7-methyl-2H-benzo[g]chromen-2-one (3) and the others were β-eudesmol (1), trans-3β-(1-hydroxy-1-methylethyl)-8aβ-methyl-5-methylenedecalin-2-one (2), 5,7-dimethoxy-8-[(Z)-3'-methyl-butan-1',3'-dienyl]coumarin (4), 7-geranyloxy-6-methoxycoumarin (5), 5,7-dimethoxy-8-(3-methyl-2-o...

  18. Endocannabinoids, Related Compounds and Their Metabolic Routes

    Filomena Fezza

    2014-10-01

    Full Text Available Endocannabinoids are lipid mediators able to bind to and activate cannabinoid receptors, the primary molecular targets responsible for the pharmacological effects of the Δ9-tetrahydrocannabinol. These bioactive lipids belong mainly to two classes of compounds: N-acylethanolamines and acylesters, being N-arachidonoylethanolamine (AEA and 2-arachidonoylglycerol (2-AG, respectively, their main representatives. During the last twenty years, an ever growing number of fatty acid derivatives (endocannabinoids and endocannabinoid-like compounds have been discovered and their activities biological is the subject of intense investigations. Here, the most recent advances, from a therapeutic point of view, on endocannabinoids, related compounds, and their metabolic routes will be reviewed.

  19. Novel Marine Compounds: Anticancer or Genotoxic?

    Arif Jamal M.

    2004-01-01

    Full Text Available In the past several decades, marine organisms have generously gifted to the pharmaceutical industries numerous naturally bioactive compounds with antiviral, antibacterial, antimalarial, anti-inflammatory, antioxidant, and anticancer potentials. But till date only few anticancer drugs (cytarabine, vidarabine have been commercially developed from marine compounds while several others are currently in different clinical trials. Majority of these compounds were tested in the tumor xenograft models, however, lack of anticancer potential data in the chemical- and/or oncogene-induced pre-initiation animal carcinogenesis models might have cost some of the marine anticancer compounds an early exit from the clinical trials. This review critically discusses importance of preclinical evaluation, failure of human clinical trials with certain potential anticancer agents, the screening tests used, and choice of biomarkers.

  20. Chemistry of tin compounds and environment

    Of the large volume of tin compounds reported in the literature, possible only 100 are commercially important. Tin compounds are a wide variety of purposes such as catalysts, stabilizers for many materials including polymer, biocidal agents, bactericides, insecticides, fungicides, wood preservatives, acaricides and anti fouling agents in paints, anticancer and antitumour agents, ceramic opacifiers, as textile additives, in metal finishing operations, as food additives and in electro conductive coating. All these applications make the environment much exposed to tin contamination. The application of organotin compounds as biocides account for about 30% of total tin consumption suggesting that the main environmental effects are likely to originate from this sector. Diorgano tins and mono-organo tins are used mainly in plastic industry which is the next big source for environmental pollution. In this presentation all environmental aspects of the use of tin compounds and the recommended preventive measures are discussed. (author)

  1. Trifluoromethylation of Carbonyl Compounds with Sodium Trifluoroacetate

    2005-01-01

    In the presence of copper (Ⅰ) halide as catalyst, a variety of carbonyl compounds could be trifluoromethylated with sodium trifluoroacetate to give the corresponding alcohols in moderate to high yields.

  2. Mechanochemical reactions on copper-based compounds

    H.L. Castricum; H. Bakker; E.K. Poels

    1998-01-01

    Mechanochemical reactions of copper and copper oxides with oxygen and carbon dioxide are discussed, as well as decomposition and reduction of copper compounds by mechanical milling under high-vacuum conditions.

  3. Phytoestrogens: Plant-derived Estrogenic Compounds

    Nevzat Konar

    2011-12-01

    Full Text Available Estrogen is a hormone, which is produced in ovary and testis; however, it has many biological effects besides the reproductive system. Phytoestrogens are the compounds, which have estrogen-like structure and activities, taking place in structure of various edible plants at different levels and in different compositions. These compounds attracted notice after the first quarter of 20th century upon they had been associated with infertility seen in some of animals fed with alfalfa, and these compounds have been identified in human-derived biological samples and its effects on health have been taken under study in the recent 30 years. These materials have especially antioxidant role in plants while they have activities in animals and humans as estrogen agonist and antagonists. Based on their chemical structure, they may be gathered under especially isoflavon and lignan groups while some of members of coumestan and stilbene groups are also identified as phytoestrogenic compound.

  4. Negative thermal expansion in framework compounds

    R Mittal

    2008-10-01

    We have studied negative thermal expansion (NTE) compounds with chemi- cal compositions of NX2O8 and NX2O7 (N=Zr, Hf and X=W, Mo, V) and M2O (M=Cu, Ag) using the techniques of inelastic neutron scattering and lattice dynamics. There is a large variation in the negative thermal expansion coefficients of these compounds. The inelastic neutron scattering experiments have been carried out using polycrystalline and single crystal samples at ambient pressure as well as at high pressures. Experimental data are useful to confirm the predictions made from our lattice dynamical calculations as well as to check the quality of the interatomic potentials developed by us. We have been able to successfully model the NTE behaviour of these compounds. Our studies show that unusual phonon softening of low energy modes is able to account for NTE in these compounds.

  5. Techniques for Analysis of Plant Phenolic Compounds

    Thomas H. Roberts

    2013-02-01

    Full Text Available Phenolic compounds are well-known phytochemicals found in all plants. They consist of simple phenols, benzoic and cinnamic acid, coumarins, tannins, lignins, lignans and flavonoids. Substantial developments in research focused on the extraction, identification and quantification of phenolic compounds as medicinal and/or dietary molecules have occurred over the last 25 years. Organic solvent extraction is the main method used to extract phenolics. Chemical procedures are used to detect the presence of total phenolics, while spectrophotometric and chromatographic techniques are utilized to identify and quantify individual phenolic compounds. This review addresses the application of different methodologies utilized in the analysis of phenolic compounds in plant-based products, including recent technical developments in the quantification of phenolics.

  6. Thermodynamic Properties of Hexavalent Uranium Compounds

    Hexavalent uranium compounds are of importance as starting materials and as intermediary compounds in the preparation of compounds of nuclear interest. Recent experimental work on the thermodynamic and thermal properties, including phase diagrams, of a number of these compounds is presented and discussed in relation to practical applications. Thermodynamic data are given on the systems UO3-U3O8 and UO2 (NO3)2-H2O, based on calorimetric measurements as well as on vapour pressure measurements. Finally, data of some other materials, including the hydrates of uranium peroxide and UO2Cl2, are discussed. Although many of the thermodynamic data are consistent, a number of inconsistencies still remain to be resolved. On this basis suggestions are given for future work. (author)

  7. HEALTH EFFECTS ASSESSMENT FOR TIN AND COMPOUNDS

    The report summarizes and evaluates information relevant to a preliminary interim assessment of adverse health effects associated with specific chemicals or compounds. The Office of Emergency and Remedial Response (Superfund) uses these documents in preparing cost-benefit analyse...

  8. Atmospheric Chemistry of Micrometeoritic Organic Compounds

    Kress, M. E.; Belle, C. L.; Pevyhouse, A. R.; Iraci, L. T.

    2011-01-01

    Micrometeorites approx.100 m in diameter deliver most of the Earth s annual accumulation of extraterrestrial material. These small particles are so strongly heated upon atmospheric entry that most of their volatile content is vaporized. Here we present preliminary results from two sets of experiments to investigate the fate of the organic fraction of micrometeorites. In the first set of experiments, 300 m particles of a CM carbonaceous chondrite were subject to flash pyrolysis, simulating atmospheric entry. In addition to CO and CO2, many organic compounds were released, including functionalized benzenes, hydrocarbons, and small polycyclic aromatic hydrocarbons. In the second set of experiments, we subjected two of these compounds to conditions that simulate the heterogeneous chemistry of Earth s upper atmosphere. We find evidence that meteor-derived compounds can follow reaction pathways leading to the formation of more complex organic compounds.

  9. Stabilized lanthanum sulphur compounds. [thermoelectric materials

    Reynolds, G. H.; Elsner, N. B.; Shearer, C. H. (Inventor)

    1983-01-01

    Lanthanum sulfide is maintained in the stable cubic phase form over a temperature range of from 500 C to 1500 C by adding to it small amounts of calcium, barium, or strontium. This compound is an excellent thermoelectric material.

  10. BEHAVIORAL TOXICITY OF TRIALKYLTIN COMPOUNDS: A REVIEW

    Triethyltin (TET) and trimethyltin (TMT) are neurotoxic organotin compounds which produce different patterns of toxicity in adult animals. Exposure to TET produces behavioral toxicity (decreased motor activity, grip strength, operant response rate and startle response amplitude) ...

  11. Agricultural Compounds in Water and Birth Defects.

    Brender, Jean D; Weyer, Peter J

    2016-06-01

    Agricultural compounds have been detected in drinking water, some of which are teratogens in animal models. The most commonly detected agricultural compounds in drinking water include nitrate, atrazine, and desethylatrazine. Arsenic can also be an agricultural contaminant, although arsenic often originates from geologic sources. Nitrate has been the most studied agricultural compound in relation to prenatal exposure and birth defects. In several case-control studies published since 2000, women giving birth to babies with neural tube defects, oral clefts, and limb deficiencies were more likely than control mothers to be exposed to higher concentrations of drinking water nitrate during pregnancy. Higher concentrations of atrazine in drinking water have been associated with abdominal defects, gastroschisis, and other defects. Elevated arsenic in drinking water has also been associated with birth defects. Since these compounds often occur as mixtures, it is suggested that future research focus on the impact of mixtures, such as nitrate and atrazine, on birth defects. PMID:27007730

  12. Phenolic Compounds in Four Astragalus Species

    Ilina N. Krasteva

    2013-01-01

    Aim: To investigate the phenolic compounds in four Astragalus species (A. hamosus, A. ponticus, A. corniculatus and A. cicer) distributed in Bulgarian flora. Study Design: Using LC-MS, HPLC, UV, NMR and HRESIMS for identification of the compounds. Place and Duration of Study: Department of Pharmacognosy, Faculty of Pharmacy, Medical University of Sofia, Bulgaria, between May 2009 and December 2012. Methodology: LC/MS/MS analysis was performed using Agilent 1100 and API 365 t...

  13. Antimicrobial Compounds to Combat Citrus Huanglongbing

    Zhang, Muqing; Guo, Ying; Powell, Charles A.; Duan, Yongping

    2014-01-01

    Citrus Huanglongbing (HLB) is associated with the fastidious bacterium,Candidatus Liberibacter, (Las) that is transmitted by a phloem-feeding insect (Citrus Psyllid). An ideal solution to combat citrus HLB is to completely eliminate the bacteria after a single course of the chemotherapy, either active directly on the bacteria or indirectly through induction of host defense compounds. Twenty-seven antimicrobial compounds were screened to test for in vivo activities against HLB bacterium while ...

  14. Mercury compounds characterization by thermal desorption

    Rumayor Villamil, Marta; Díaz Somoano, Mercedes; López Antón, María Antonia; Martínez Tarazona, María Rosa

    2013-01-01

    [EN] The ability to accurately determine metal mercury content and identify different mercury species in solid samples is essential for developing remediation and control strategies. The aim of the present study is to characterize mercury compounds based on thermal desorption. For this purpose a series of samples was prepared and the operational parameters—heating velocity, carrier gas—were optimized. Fifteen commercial mercury compounds were analyzed for use as fingerprints. The results of t...

  15. BASF Launches New Compounding Plant in China

    2007-01-01

    @@ BASF, a leading international chemical company,kicked off construction of an engineering plastics compounding plant Pudong Area in Shanghai in midMay. The new facility is a world-scale plant with annual capacity of 45,000 tons. It is one of the most modern compounding plants in the world today, with "the highest environmental standards and the most efficient production capabilities available," according to a BASF official.

  16. Medical Applications and Toxicities of Gallium Compounds

    Christopher R. Chitambar

    2010-05-01

    Full Text Available Over the past two to three decades, gallium compounds have gained importance in the fields of medicine and electronics. In clinical medicine, radioactive gallium and stable gallium nitrate are used as diagnostic and therapeutic agents in cancer and disorders of calcium and bone metabolism. In addition, gallium compounds have displayed anti-inflammatory and immunosuppressive activity in animal models of human disease while more recent studies have shown that gallium compounds may function as antimicrobial agents against certain pathogens. In a totally different realm, the chemical properties of gallium arsenide have led to its use in the semiconductor industry. Gallium compounds, whether used medically or in the electronics field, have toxicities. Patients receiving gallium nitrate for the treatment of various diseases may benefit from such therapy, but knowledge of the therapeutic index of this drug is necessary to avoid clinical toxicities. Animals exposed to gallium arsenide display toxicities in certain organ systems suggesting that environmental risks may exist for individuals exposed to this compound in the workplace. Although the arsenic moiety of gallium arsenide appears to be mainly responsible for its pulmonary toxicity, gallium may contribute to some of the detrimental effects in other organs. The use of older and newer gallium compounds in clinical medicine may be advanced by a better understanding of their mechanisms of action, drug resistance, pharmacology, and side-effects. This review will discuss the medical applications of gallium and its mechanisms of action, the newer gallium compounds and future directions for development, and the toxicities of gallium compounds in current use.

  17. Preparation of azo compounds with solid catalysts

    Corma, Avelino; García Gómez, Hermenegildo; Grirrane, Abdessamad

    2008-01-01

    [EN] The present invention refers to a procedure for preparing azo compounds comprising a reaction between at least: one amine or polyamine, molecular oxygen, a catalyst comprising at least one support selected fkom at least a metal oxide of one of the elements of the groups 3,4, 5, 6, 8, 9, 11 and 13, silica, an anionic laminar compound of hydrotalcite type or its derivatives, active carbon or an organic polymer. In addition, said catalyst may contain nanoparticles of gold.

  18. Antiviral Lead Compounds from Marine Sponges

    Kenneth P. Minneman; Mandeep Kaur; Sunil Sagar

    2010-01-01

    Marine sponges are currently one of the richest sources of pharmacologically active compounds found in the marine environment. These bioactive molecules are often secondary metabolites, whose main function is to enable and/or modulate cellular communication and defense. They are usually produced by functional enzyme clusters in sponges and/or their associated symbiotic microorganisms. Natural product lead compounds from sponges have often been found to be promising pharmaceutical agents. Seve...

  19. Mass spectrometry for determination of bioactive compounds

    Tilvi, S.; Majik, M.S.; Singh, K.S.

    cell. This type of experiment is particularly useful for monitoring groups of compounds contained within a mixture which fragment to produce common fragment ions, e.g. glycosylated peptides in a tryptic digest mixture, aliphatic hydrocarbons in an oil... in a matrix e.g. drug testing with blood or urine samples. It is not only a highly specific method but also has very high sensitivity. For known compounds, mass spectra can be used much like fingerprints. A match is extremely strong evidence...

  20. Techniques for Analysis of Plant Phenolic Compounds

    Roberts, Thomas H.; Meredith A. Wilkes; Ali Khoddami

    2013-01-01

    Phenolic compounds are well-known phytochemicals found in all plants. They consist of simple phenols, benzoic and cinnamic acid, coumarins, tannins, lignins, lignans and flavonoids. Substantial developments in research focused on the extraction, identification and quantification of phenolic compounds as medicinal and/or dietary molecules have occurred over the last 25 years. Organic solvent extraction is the main method used to extract phenolics. Chemical procedures are used to detect the pre...

  1. Bioactive compounds in whole grain wheat

    Mateo Anson, N.

    2010-01-01

    Bread can be healthier! Consuming whole-grain foods can prevent cardiovascular diseases, type-2 diabetes and metabolic syndrome. This is due to bioactive compounds in whole grain, such as antioxidants and anti-inflammatory compounds. We found that the different fractions of a wheat grain vary much in their content. The external fractions of the grain, the bran and specially the aleurone, are the richest. We observed that processing the bran in whole-grain breads increased three times the leve...

  2. Superconductivity in rare earth and actinide compounds

    Rare earth and actinide compounds and the extraordinary superconducting and magnetic phenomena they exhibit are surveyed. The rare earth and actinide compounds described belong to three classes of novel superconducting materials: high temperature, high field superconductors (intermetallics and layered cuprates); superconductors containing localized magnetic moments; heavy fermion superconductors. Recent experiments on the resistive upper critical field of high Tc cuprate superconductors and the peak effect in the critical current density of the f-electron superconductor CeRu2 are discussed. (orig.)

  3. AN AROMATIC COMPOUND from CENTAUREA PTOSIMOPAPPOIDES

    A. ULUBELEN, S. ÖKSÜZ

    2015-01-01

    Centaurea ptosimopappoides was previously investigated by our groupand the presence of two new triterpenes were reported. The rare occurrence ofthis type compounds in the plants prompted us to further investigation of Centaureaptosimopappoides. In this work we report the isolation and structure determinationof an aromatic glycoside which was found in the genus Centaureafor the first time. The structure of the compound was determined by spectralmethods.Key words: Centaurea ptosimopappoides; Co...

  4. Phenolic compounds of three unconventional Sudanese oils

    Abdalbasit Mariod; Bertrand Matthäus; Karl Eichner; Hussein, Ismail H.

    2015-01-01

    Background. The total amount and content of phenolic and fl avonoid compounds using the Folin-Ciocalteu and Aluminum chloride methods of the methanolic extracts of Sclerocarya birrea oil (SCO), Melon bug oil (MBO), and Sorghum bug oil (SBO) were studied. Material and methods. Dry samples of Sclerocarya birrea, Aspongopus vidiuatus and Agonoscelis pubescens were used in this study. The oil was extracted using n-hexane following AOCS method. The phenolic compounds were extracted following a...

  5. Crystal Structure of New Heusler Compounds

    Graf, Tanja; Casper, Frederick; Winterlik, Jürgen; Balke, Benjamin; FECHER, GERHARD H.; Felser, Claudia

    2009-01-01

    Abstract Heusler compounds are promising materials in many fields of contemporary research. The spectrum of their possible applications ranges from magnetic and magneto-mechanical materials over semiconductors and thermoelectrics to superconductors. An important feature of the Heusler compounds is the possibility of controlling the valence electron concentration by partial substitution of elements. On the other hand, the properties also depend on the degree of ordering of the the c...

  6. Crystal Structure of New Heusler Compounds

    Graf, Tanja; Casper, Frederick; Winterlik, Jürgen; Balke, Benjamin; FECHER, GERHARD H.; Felser, Claudia

    2009-01-01

    Heusler compounds are promising materials in many fields of contemporary research. The spectrum of their possible applications ranges from magnetic and magneto-mechanical materials over semiconductors and thermoelectrics to superconductors. An important feature of the Heusler compounds is the possibility of controlling the valence electron concentration by partial substitution of elements. On the other hand, the properties also depend on the degree of ordering of the the crystal structure. In...

  7. Basics and prospective of magnetic Heusler compounds

    Claudia Felser; Lukas Wollmann; Stanislav Chadov; FECHER, GERHARD H.; Parkin, Stuart S. P.

    2015-01-01

    Heusler compounds are a remarkable class of materials with more than 1000 members and a wide range of extraordinary multi-functionalities including halfmetallic high-temperature ferri- and ferromagnets, multi-ferroics, shape memory alloys, and tunable topological insulators with a high potential for spintronics, energy technologies, and magneto-caloric applications. The tunability of this class of materials is exceptional and nearly every functionality can be designed. Co2-Heusler compounds s...

  8. Botanical Compounds: Effects on Major Eye Diseases

    Tuan-Phat Huynh; Mann, Shivani N.; Mandal, Nawajes A.

    2013-01-01

    Botanical compounds have been widely used throughout history as cures for various diseases and ailments. Many of these compounds exhibit strong antioxidative, anti-inflammatory, and antiapoptotic properties. These are also common damaging mechanisms apparent in several ocular diseases, including age-related macular degeneration (AMD), glaucoma, diabetic retinopathy, cataract, and retinitis pigmentosa. In recent years, there have been many epidemiological and clinical studies that have demonst...

  9. Electrochemical activation of reactions involving organometallic compounds

    Data on the electrochemical activation of various reactions involving organometallic compounds are generalised. Primary attention is devoted to the main types of transformation that can be performed by electrochemical electron transfer: redox activation of 16- and 18-electron complexes of transition metals, molybdenum, tungsten, and ruthenium in particular, as the first step of a broad range of reactions, electrocatalysis, mediator processes, and electrosynthesis of compounds containing carbon-metal σ-bonds

  10. Reduced sulfur compound oxidation by Thiobacillus caldus.

    Hallberg, K. B.; Dopson, M; Lindström, E B

    1996-01-01

    The oxidation of reduced inorganic sulfur compounds was studied by using resting cells of the moderate thermophile Thiobacillus caldus strain KU. The oxygen consumption rate and total oxygen consumed were determined for the reduced sulfur compounds thiosulfate, tetrathionate, sulfur, sulfide, and sulfite in the absence and in the presence of inhibitors and uncouplers. The uncouplers 2,4-dinitrophenol and carbonyl cyanide m-chlorophenyl-hydrazone had no affect on the oxidation of thiosulfate, ...

  11. Two new compounds from Xanthium strumarium.

    Yin, Rong-Hua; Bai, Xue; Feng, Tao; Dong, Ze-Jun; Li, Zheng-Hui; Liu, Ji-Kai

    2016-01-01

    One new lignan, fructusol A (1), and one new thiazine derivative, 2-hydroxy-xanthiazone (2), along with eight known ones, were isolated from the seeds of Xanthium strumarium. The structures of new compounds were elucidated on the basis of extensive spectroscopic methods. Meanwhile, compounds 1-3 were tested for their antifungal activities against Candida albicans (ATCC 10231) in vitro. No one showed obvious inhibitions (MIC90 > 128 μg/ml). PMID:26629595

  12. PERFLUORINATED COMPOUNDS: EMERGING POPs WITH POTENTIAL IMMUNOTOXICITY

    Corsini, Emanuela; Luebke, Robert W.; Germolec, Dori R.; DeWitt, Jamie C.

    2014-01-01

    Perfluorinated compounds (PFCs) have been recognized as an important class of environmental contaminants commonly detected in blood samples of both wildlife and humans. These compounds have been in use for more than 60 years as surface treatment chemicals, polymerization aids, and surfactants. They possess a strong carbon-fluorine bond, which leads to their environmental persistence. There is evidence from both epidemiology and laboratory studies that PFCs may be immunotoxic, affecting both c...

  13. Chemotaxis of Azospirillum Species to Aromatic Compounds

    Lopez-de-Victoria, Geralyne; Lovell, Charles R.

    1993-01-01

    Chemotaxis of Azospirillum lipoferum Sp 59b and Azospirillum brasilense Sp 7 and Sp CD to malate and to the aromatic substrates benzoate, protocatechuate, 4-hydroxybenzoate, and catechol was assayed by the capillary method and direct cell counts. A. lipoferum required induction by growth on 4-hydroxybenzoate for positive chemotaxis to this compound. Chemotaxis of Azospirillum spp. to all other substrates did not require induction. Maximum chemotactic responses for most aromatic compounds occu...

  14. Carbonyl Compounds Generated from Electronic Cigarettes

    Kanae Bekki

    2014-10-01

    Full Text Available Electronic cigarettes (e-cigarettes are advertised as being safer than tobacco cigarettes products as the chemical compounds inhaled from e-cigarettes are believed to be fewer and less toxic than those from tobacco cigarettes. Therefore, continuous careful monitoring and risk management of e-cigarettes should be implemented, with the aim of protecting and promoting public health worldwide. Moreover, basic scientific data are required for the regulation of e-cigarette. To date, there have been reports of many hazardous chemical compounds generated from e-cigarettes, particularly carbonyl compounds such as formaldehyde, acetaldehyde, acrolein, and glyoxal, which are often found in e-cigarette aerosols. These carbonyl compounds are incidentally generated by the oxidation of e-liquid (liquid in e-cigarette; glycerol and glycols when the liquid comes in contact with the heated nichrome wire. The compositions and concentrations of these compounds vary depending on the type of e-liquid and the battery voltage. In some cases, extremely high concentrations of these carbonyl compounds are generated, and may contribute to various health effects. Suppliers, risk management organizations, and users of e-cigarettes should be aware of this phenomenon.

  15. Natural compounds for pediatric cancer treatment.

    Ferrucci, Veronica; Boffa, Iolanda; De Masi, Gina; Zollo, Massimo

    2016-02-01

    There is a tremendous need in clinics to impair cancer progression through noninvasive therapeutic approaches. The use of natural compounds to achieve this is of importance to improve the quality of life of young patients during their treatments. This review will address the "status of the art" related to the potential of natural compounds that are undergoing investigation in combination with standard therapeutic protocols in preclinical and clinical studies and their importance for pediatric cancer treatment. The early studies of drug discovery of these natural compounds discussed here include the main targets, the cellular signaling pathways involved, and the potential modes of action. We also focus on some promising natural compounds that have shown excellent results in vitro and in vivo: Chebulagic acid, Apigenin, Norcantharidin, Saffron/Crocin, Parthenolide, Longikaurin E, Lupeol, Spongistatin 1, and Deoxy-variolin B. Additionally, we introduce the effects of several compounds from nutraceutical and functional foods, to underline their potential use as adjuvant therapies to improve therapeutic benefits. For this purpose, we have selected several compounds: Agaritine, Ganoderma and GL6 peptide, Diallyl trisulfide and Ajoene from garlic, Epigallocatechin gallate from green tea, Curcumin, Resveratrol, and Quercetin. PMID:26650503

  16. Environmentally acceptable drill pipe thread compound

    Environmental concerns are prompting the petroleum industry to replace thread compounds. Traditional thread compound formulations, now widely used for more than three decades have proven effective. But all contain significant percentages (up to about 60%) of heavy metal powders. Ingredients such as copper, lead and zinc are increasingly being banned for use or dumping. This paper outlines the issues and describes the new technology which will be required in most areas during 1992. It introduces a drill pipe thread compound with unique mechanisms to achieve improved functional performance while providing environmental acceptability. Rotary shouldered compounds (and orthodox thinking) have relied upon soft, low melting point, malleable metal particles to provide connection sealing and anti-galling characteristics. The new approach uses the non-conformist approach of hard ceramic microspheres to achieve the same results. This work gives the application and general performance requirements for rotary shouldered thread compounds. It compares the new technology with traditional compounds from the standpoint of composition, functional performance, and environmental acceptability. Bomac's work now makes it possible to run a drilling project entirely free of lead, copper and zinc

  17. Polymers containing borane or carborane cage compounds and related applications

    Bowen, III, Daniel E; Eastwood, Eric A

    2013-04-23

    Polymers comprising residues of cage compound monomers having at least one polyalkoxy silyl substituent are provided. The cage compound monomers are selected from borane cage compound monomers comprising at least 7 cage atoms and/or carborane cage compound monomers comprising 7 to 11 cage compound monomers. Such polymers can further comprise one or more reactive matrices and/or co-monomers covalently bound with the cage compound monomer residues. Articles of manufacture comprising such polymers are also disclosed.

  18. Chemical effect on diffusion in intermetallic compounds

    Chen, Yi-Ting

    With the trend of big data and the Internet of things, we live in a world full of personal electronic devices and small electronic devices. In order to make the devices more powerful, advanced electronic packaging such as wafer level packaging or 3D IC packaging play an important role. Furthermore, ?-bumps, which connect silicon dies together with dimension less than 10 ?m, are crucial parts in advanced packaging. Owing to the dimension of ?-bumps, they transform into intermetallic compound from tin based solder after the liquid state bonding process. Moreover, many new reliability issues will occur in electronic packaging when the bonding materials change; in this case, we no longer have tin based solder joint, instead, we have intermetallic compound ?-bumps. Most of the potential reliability issues in intermetallic compounds are caused by the chemical reactions driven by atomic diffusion in the material; thus, to know the diffusivities of atoms inside a material is significant and can help us to further analyze the reliability issues. However, we are lacking these kinds of data in intermetallic compound because there are some problems if used traditional Darken's analysis. Therefore, we considered Wagner diffusivity in our system to solve the problems and applied the concept of chemical effect on diffusion by taking the advantage that large amount of energy will release when compounds formed. Moreover, by inventing the holes markers made by Focus ion beam (FIB), we can conduct the diffusion experiment and obtain the tracer diffusivities of atoms inside the intermetallic compound. We applied the technique on Ni3Sn4 and Cu3Sn, which are two of the most common materials in electronic packaging, and the tracer diffusivities are measured under several different temperatures; moreover, microstructure of the intermetallic compounds are investigated to ensure the diffusion environment. Additionally, the detail diffusion mechanism was also discussed in aspect of diffusion

  19. Pharmacists' Perceptions of the Economic Value of Compounded Pharmaceuticals: A Comparison of Compounded and Commercial Pharmaceuticals in Select Disease States.

    Lobb, William B; Wilkin, Noel E; Holmes, Erin R

    2015-01-01

    Studies have been conducted to assess patient satisfaction with compounded pharmaceuticals and to directly compare compounded pharmaceuticals with their comparable commercial pharmaceuticals. Yet, the economic value of or potential for economic value derived from compounded pharmaceuticals relative to commercial pharmaceuticals is still not known. Therefore, the purpose of this study was to assess and compare compounding and non-compounding pharmacists' perceptions of the economic value of compounded preparations relative to commercial products. In-depth interviews with 10 compounding pharmacists and physicians who prescribe compounded prescription pharmaceutical preparations were conducted to help develop a self-administered questionnaire distributed to 50 compounding and 50 non-compounding pharmacists. Compounding and non-compounding pharmacists' perceptions differed most often in the context of compounded pharmaceuticals for pediatric patients. However, both groups responded with moderate agreement that compounded prescription treatments are more profitable for the pharmacy than commercial prescription treatments in most therapeutic areas. This research sought to understand the perception of pharmacists of areas for potential direct and indirect economic cost savings as a result of compounding. For all items whereby compounding and non-compounding pharmacists' ratings were significantly different, compounding pharmacists more strongly believed that compounding pharmaceuticals offered benefit and vice versa. The differences in ratings that were most common were those that directly compared the economic value of compounding and commercial pharmaceuticals, with compounding pharmacists more strongly agreeing with the potential cost savings associated with compounded pharmaceuticals. Based on these findings, prescription compounds are believed to have a benefit to the health system by those who provide them. Future research should proactively explore the economic

  20. Reflectance spectroscopy of organic compounds: 1. Alkanes

    Clark, R.N.; Curchin, J.M.; Hoefen, T.M.; Swayze, G.A.

    2009-01-01

    Reflectance spectra of the organic compounds comprising the alkane series are presented from the ultraviolet to midinfrared, 0.35 to 15.5 /??m. Alkanes are hydrocarbon molecules containing only single carbon-carbon bonds, and are found naturally on the Earth and in the atmospheres of the giant planets and Saturn's moon, Titan. This paper presents the spectral properties of the alkanes as the first in a series of papers to build a spectral database of organic compounds for use in remote sensing studies. Applications range from mapping the environment on the Earth, to the search for organic molecules and life in the solar system and throughout the. universe. We show that the spectral reflectance properties of organic compounds are rich, with major diagnostic spectral features throughout the spectral range studied. Little to no spectral change was observed as a function of temperature and only small shifts and changes in the width of absorption bands were observed between liquids and solids, making remote detection of spectral properties throughout the solar system simpler. Some high molecular weight organic compounds contain single-bonded carbon chains and have spectra similar to alkanes even ' when they fall into other families. Small spectral differences are often present allowing discrimination among some compounds, further illustrating the need to catalog spectral properties for accurate remote sensing identification with spectroscopy.

  1. Determination of arsenic compounds in earthworms

    Geiszinger, A.; Goessler, W.; Kuehnelt, D.; Kosmus, W. [Karl-Franzens-Univ., Graz (Austria). Inst. for Analytical Chemistry; Francesconi, K. [Odense Univ. (Denmark). Inst. of Biology

    1998-08-01

    Earthworms and soil collected from six sites in Styria, Austria, were investigated for total arsenic concentrations by ICP-MS and for arsenic compounds by HPLC-ICP-MS. Total arsenic concentrations ranged from 3.2 to 17.9 mg/kg dry weight in the worms and from 5.0 to 79.7 mg/kg dry weight in the soil samples. There was no strict correlation between the total arsenic concentrations in the worms and soil. Arsenic compounds were extracted from soil and a freeze-dried earthworm sample with a methanol/water mixture (9:1, v/v). The extracts were evaporated to dryness, redissolved in water, and chromatographed on an anion- and a cation-exchange column. Arsenic compounds were identified by comparison of the retention times with known standards. Only traces of arsenic acid could be extracted from the soil with the methanol/water (9:1, v/v) mixture. The major arsenic compounds detected in the extracts of the earthworms were arsenous acid and arsenic acid. Arsenobetaine was present as a minor constituent, and traces of dimethylarsinic acid were also detected. Two dimethylarsinoyltribosides were also identified in the extracts by co-chromatography with standard compounds. This is the first report of the presence of dimethylarsinoylribosides in a terrestrial organism. Two other minor arsenic species were present in the extract, but their retention times did not match with the retention times of the available standards.

  2. Basics and prospective of magnetic Heusler compounds

    Claudia Felser

    2015-04-01

    Full Text Available Heusler compounds are a remarkable class of materials with more than 1000 members and a wide range of extraordinary multi-functionalities including halfmetallic high-temperature ferri- and ferromagnets, multi-ferroics, shape memory alloys, and tunable topological insulators with a high potential for spintronics, energy technologies, and magneto-caloric applications. The tunability of this class of materials is exceptional and nearly every functionality can be designed. Co2-Heusler compounds show high spin polarization in tunnel junction devices and spin-resolved photoemission. Manganese-rich Heusler compounds attract much interest in the context of spin transfer torque, spin Hall effect, and rare earth free hard magnets. Most Mn2-Heusler compounds crystallize in the inverse structure and are characterized by antiparallel coupling of magnetic moments on Mn atoms; the ferrimagnetic order and the lack of inversion symmetry lead to the emergence of new properties that are absent in ferromagnetic centrosymmetric Heusler structures, such as non-collinear magnetism, topological Hall effect, and skyrmions. Tetragonal Heusler compounds with large magneto crystalline anisotropy can be easily designed by positioning the Fermi energy at the van Hove singularity in one of the spin channels. Here, we give a comprehensive overview and a prospective on the magnetic properties of Heusler materials.

  3. Basics and prospective of magnetic Heusler compounds

    Heusler compounds are a remarkable class of materials with more than 1000 members and a wide range of extraordinary multi-functionalities including halfmetallic high-temperature ferri- and ferromagnets, multi-ferroics, shape memory alloys, and tunable topological insulators with a high potential for spintronics, energy technologies, and magneto-caloric applications. The tunability of this class of materials is exceptional and nearly every functionality can be designed. Co2-Heusler compounds show high spin polarization in tunnel junction devices and spin-resolved photoemission. Manganese-rich Heusler compounds attract much interest in the context of spin transfer torque, spin Hall effect, and rare earth free hard magnets. Most Mn2-Heusler compounds crystallize in the inverse structure and are characterized by antiparallel coupling of magnetic moments on Mn atoms; the ferrimagnetic order and the lack of inversion symmetry lead to the emergence of new properties that are absent in ferromagnetic centrosymmetric Heusler structures, such as non-collinear magnetism, topological Hall effect, and skyrmions. Tetragonal Heusler compounds with large magneto crystalline anisotropy can be easily designed by positioning the Fermi energy at the van Hove singularity in one of the spin channels. Here, we give a comprehensive overview and a prospective on the magnetic properties of Heusler materials

  4. Basics and prospective of magnetic Heusler compounds

    Felser, Claudia, E-mail: felser@cpfs.mpg.de; Wollmann, Lukas; Chadov, Stanislav; Fecher, Gerhard H. [Max-Planck-Institut für Chemische Physik fester Stoffe, Nöthnitzer Str. 40, 01187 Dresden (Germany); Parkin, Stuart S. P. [Max-Planck-Institut für Mikrostrukturphysik, Weinberg 2, Halle (Germany)

    2015-04-01

    Heusler compounds are a remarkable class of materials with more than 1000 members and a wide range of extraordinary multi-functionalities including halfmetallic high-temperature ferri- and ferromagnets, multi-ferroics, shape memory alloys, and tunable topological insulators with a high potential for spintronics, energy technologies, and magneto-caloric applications. The tunability of this class of materials is exceptional and nearly every functionality can be designed. Co{sub 2}-Heusler compounds show high spin polarization in tunnel junction devices and spin-resolved photoemission. Manganese-rich Heusler compounds attract much interest in the context of spin transfer torque, spin Hall effect, and rare earth free hard magnets. Most Mn{sub 2}-Heusler compounds crystallize in the inverse structure and are characterized by antiparallel coupling of magnetic moments on Mn atoms; the ferrimagnetic order and the lack of inversion symmetry lead to the emergence of new properties that are absent in ferromagnetic centrosymmetric Heusler structures, such as non-collinear magnetism, topological Hall effect, and skyrmions. Tetragonal Heusler compounds with large magneto crystalline anisotropy can be easily designed by positioning the Fermi energy at the van Hove singularity in one of the spin channels. Here, we give a comprehensive overview and a prospective on the magnetic properties of Heusler materials.

  5. Secrecy results for compound wiretap channels

    Bjelakovic, Igor; Sommerfeld, Jochen

    2011-01-01

    We derive a lower bound on the secrecy capacity of the compound wiretap channel with channel state information at the transmitter which matches the general upper bound on the secrecy capacity of general compound wiretap channels given by Liang et al. and thus establishing a full coding theorem in this case. We achieve this with a stronger secrecy criterion and with a decoder that is robust against the effect of randomisation in the encoding. This relieves us from the need of decoding the randomisation parameter which is in general not possible within this model. Moreover we prove a lower bound on the secrecy capacity of the compound wiretap channel without channel state information and derive a multi-letter expression for the capacity in this communication scenario.

  6. Bioactive Compounds Found in Brazilian Cerrado Fruits

    Elisa Flávia Luiz Cardoso Bailão

    2015-10-01

    Full Text Available Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provides information about Cerrado fruits and highlights the structures and pharmacologic potential of functional compounds found in these fruits. Compounds detected in Caryocar brasiliense Camb. (pequi, Dipteryx alata Vog. (baru, Eugenia dysenterica DC. (cagaita, Eugenia uniflora L. (pitanga, Genipa americana L. (jenipapo, Hancornia speciosa Gomes (mangaba, Mauritia flexuosa L.f. (buriti, Myrciaria cauliflora (DC Berg (jabuticaba, Psidium guajava L. (goiaba, Psidium spp. (araçá, Solanum lycocarpum St. Hill (lobeira, Spondias mombin L. (cajá, Annona crassiflora Mart. (araticum, among others are reported here.

  7. Environmentally acceptable thread compounds: Requirements defined

    New environmental regulations on thread compounds are now being enforced in several areas with strong maritime tradition and a sensitive environment. These areas include Indonesia, Alaska and portions of Norway. The industry generally recognizes the environmental concerns but, with wider enforcement of regulations imminent, has not been able to define clearly the requirements for environmental compliance. This paper, written in collaboration with The Netherlands State Supervision of Mines, is based on the National Policy on Thread Compounds of The Netherlands. This national policy is representative of policies being followed by other North Sea governments. Similar policies might well be adopted by other governments worldwide. These policies will affect the operator, drilling contractor, and supplier. This paper provides a specific and detailed definition of thread compound requirements by addressing four relevant categories. The categories of interest are regulatory approval, environmental, health, and performance

  8. Reliability and radiation effects in compound semiconductors

    Johnston, Allan

    2010-01-01

    This book discusses reliability and radiation effects in compound semiconductors, which have evolved rapidly during the last 15 years. Johnston's perspective in the book focuses on high-reliability applications in space, but his discussion of reliability is applicable to high reliability terrestrial applications as well. The book is important because there are new reliability mechanisms present in compound semiconductors that have produced a great deal of confusion. They are complex, and appear to be major stumbling blocks in the application of these types of devices. Many of the reliability problems that were prominent research topics five to ten years ago have been solved, and the reliability of many of these devices has been improved to the level where they can be used for ten years or more with low failure rates. There is also considerable confusion about the way that space radiation affects compound semiconductors. Some optoelectronic devices are so sensitive to damage in space that they are very difficu...

  9. Oxidative electrochemical switching of photochromic diarylethene compounds

    Fan, Congbin; Pu, Shouzhi; Liu, Weijun; Yang, Tianshe; Liu, Gang

    2008-12-01

    A series of photochromic diarylethenes compounds were synthesized and the electrochemistry and electrochemistry reaction mechanism properties were investigated. The cyclic voltammetry tests demonstrated that the colorless open-ring isomers were assigned to the unique oxidation process, but the color closed-ring isomers of these compounds were assigned to two oxidation processes. In addition, the electrochromism of diarylethene compound is observed in solution: The closed-ring reaction can be triggered by electrochemical oxidation, while the open-ring reaction must be photochemically driven. These oxidation processes properties can be useful as the oxidation processes electrochemical switching and the oxidation electrochemical switching properties of these different diarylethene isomers can be potential for electrochemistry data storages.

  10. Energetic Compounds for Future Space Applications

    Davenas, A.; Jacob, G.; Longevialle, Y.; Pérut, C.

    2004-10-01

    The need for new rocket propellants to improve or replace those in use today has led during the past ten years to studies of various, ancient or relatively new, energetic ingredients. The most often mentioned compounds for solid propellants are ADN (ammonium dinitramide), the nitramines RDX and HMX, HNIW (hexanitro hexaaza isowurtzitane), HNF (hydrazinum nitroformate), GAP (glycidyl azide polymer), and high nitrogen compounds. ADN, HNF, HAN (hydroxylammonium nitrate) are mentioned as possible ingredients in liquid mono and bi propellants for the future. A review of the work being conducted in the development and testing of the candidate propellants as well as an analysis of the general constraints of the industrial use and handling of these propellants and of their basic ingredients allows for a first tentative selection of the most promising ingredients. The possible synthesis routes, main characteristics, production and cost perspectives of these compounds are summarized and discussed.

  11. The isotopic fractionation of organic compounds

    Isotopic fractionation of organic compounds is the observation of their chromatographic separation caused solely by differing isotopic content. The phenomenon has been observed for over 35 years by investigators in various disciplines working with labeled compounds on GC, TLC, and HPLC. Over 100 reports of such separations for organic compounds labeled with 2H, 3H, 13C, and 14C are scattered throughout the literature, and it has been over twenty years since the topic was adequately reviewed. This paper will highlight the existing literature and examples from the author's own laboratory as well as emphasize the thoroughness and caution that one must exercise before invoking this explanation for anomalous chromatographic behavior of organic isotopomers

  12. Radiation synthesis of materials and compounds

    Kharisov, Boris Ildusovich; Ortiz Méndez, Ubaldo

    2013-01-01

    Researchers and engineers working in nuclear laboratories, nuclear electric plants, and elsewhere in the radiochemical industries need a comprehensive handbook describing all possible radiation-chemistry interactions between irradiation and materials, the preparation of materials under distinct radiation types, the possibility of damage of materials under irradiation, and more. Radiation nanotechnology is still practically an undeveloped field, except for some achievements in the fabrication of metallic nanoparticles under ionizing flows. Radiation Synthesis of Materials and Compounds presents the state of the art of the synthesis of materials, composites, and chemical compounds, and describes methods based on the use of ionizing radiation. It is devoted to the preparation of various types of materials (including nanomaterials) and chemical compounds using ionizing radiation (alpha particles, beta particles, gamma rays, x-rays, and neutron, proton, and ion beams). The book presents contributions from leaders ...

  13. Modeling of cooperative properties of inorganic compounds

    When modeling cooperative phenomena, the approach based on the study of certain diamagnetodiluted compounds with increasing concentration of magnetic complexes has been realized sequentially. It has been shown that in the systems with a strong electron-phonon interaction the study of properties of isolated and interacting complexes permits a correct prediction of the structure and magnetic properties of the concentrated compounds. Examples of the study of CuL6 complexes Jahn-Teller effect in various classes of inorganic compounds by the ESR method are considered. The detection and study of the dynamic Jahn-Teller complexes in solid solutions La2-ySryAl1-xCuxO4 permitted suggesting a model dynamic structure of CuO2 basic layer in high-Tc materials

  14. Photoinduced mass transport in azo compounds

    Klismeta, K.; Teteris, J.; Aleksejeva, J.

    2013-12-01

    The photoinduced changes of optical properties in azobenzene containing compound thin films were studied under influence of polarized and non-polarized 532 nm laser light. Under influence of light azo compounds experience trans-cis isomerisation process, that can be observed in the absorbance spectrum of the sample. If the light is linearly polarized, molecules align perpendicularly to the electric field vector and as a result photoinduced dichroism and birefringence is obtained. If a known lateral polarization modulation of the light beam is present, mass transport of the azobenzene containing compound occurs. By measuring the surface relief with a profilometer the direction of mass transport can be determined. The studies of this work show that direct holographic recording of surface relief gratings can be used in optoelectronics, telecommunications and data storage.

  15. Bioactive Compounds Found in Brazilian Cerrado Fruits.

    Bailão, Elisa Flávia Luiz Cardoso; Devilla, Ivano Alessandro; da Conceição, Edemilson Cardoso; Borges, Leonardo Luiz

    2015-01-01

    Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provides information about Cerrado fruits and highlights the structures and pharmacologic potential of functional compounds found in these fruits. Compounds detected in Caryocar brasiliense Camb. (pequi), Dipteryx alata Vog. (baru), Eugenia dysenterica DC. (cagaita), Eugenia uniflora L. (pitanga), Genipa americana L. (jenipapo), Hancornia speciosa Gomes (mangaba), Mauritia flexuosa L.f. (buriti), Myrciaria cauliflora (DC) Berg (jabuticaba), Psidium guajava L. (goiaba), Psidium spp. (araçá), Solanum lycocarpum St. Hill (lobeira), Spondias mombin L. (cajá), Annona crassiflora Mart. (araticum), among others are reported here. PMID:26473827

  16. Antiviral lead compounds from marine sponges

    Sagar, Sunil

    2010-10-11

    Marine sponges are currently one of the richest sources of pharmacologically active compounds found in the marine environment. These bioactive molecules are often secondary metabolites, whose main function is to enable and/or modulate cellular communication and defense. They are usually produced by functional enzyme clusters in sponges and/or their associated symbiotic microorganisms. Natural product lead compounds from sponges have often been found to be promising pharmaceutical agents. Several of them have successfully been approved as antiviral agents for clinical use or have been advanced to the late stages of clinical trials. Most of these drugs are used for the treatment of human immunodeficiency virus (HIV) and herpes simplex virus (HSV). The most important antiviral lead of marine origin reported thus far is nucleoside Ara-A (vidarabine) isolated from sponge Tethya crypta. It inhibits viral DNA polymerase and DNA synthesis of herpes, vaccinica and varicella zoster viruses. However due to the discovery of new types of viruses and emergence of drug resistant strains, it is necessary to develop new antiviral lead compounds continuously. Several sponge derived antiviral lead compounds which are hopedto be developed as future drugs are discussed in this review. Supply problems are usually the major bottleneck to the development of these compounds as drugs during clinical trials. However advances in the field of metagenomics and high throughput microbial cultivation has raised the possibility that these techniques could lead to the cost-effective large scale production of such compounds. Perspectives on biotechnological methods with respect to marine drug development are also discussed. 2010 by the authors; licensee MDPI.

  17. Antiviral Lead Compounds from Marine Sponges

    Kenneth P. Minneman

    2010-10-01

    Full Text Available Marine sponges are currently one of the richest sources of pharmacologically active compounds found in the marine environment. These bioactive molecules are often secondary metabolites, whose main function is to enable and/or modulate cellular communication and defense. They are usually produced by functional enzyme clusters in sponges and/or their associated symbiotic microorganisms. Natural product lead compounds from sponges have often been found to be promising pharmaceutical agents. Several of them have successfully been approved as antiviral agents for clinical use or have been advanced to the late stages of clinical trials. Most of these drugs are used for the treatment of human immunodeficiency virus (HIV and herpes simplex virus (HSV. The most important antiviral lead of marine origin reported thus far is nucleoside Ara-A (vidarabine isolated from sponge Tethya crypta. It inhibits viral DNA polymerase and DNA synthesis of herpes, vaccinica and varicella zoster viruses. However due to the discovery of new types of viruses and emergence of drug resistant strains, it is necessary to develop new antiviral lead compounds continuously. Several sponge derived antiviral lead compounds which are hopedto be developed as future drugs are discussed in this review. Supply problems are usually the major bottleneck to the development of these compounds as drugs during clinical trials. However advances in the field of metagenomics and high throughput microbial cultivation has raised the possibility that these techniques could lead to the cost-effective large scale production of such compounds. Perspectives on biotechnological methods with respect to marine drug development are also discussed.

  18. Capacities of classical compound quantum wiretap and classical quantum compound wiretap channels

    Cai, Minglai; Deppe, Christian

    2012-01-01

    We determine the capacity of the classical compound quantum wiretapper channel with channel state information at the transmitter. Moreover we derive a lower bound on the capacity of this channel without channel state information and determine the capacity of the classical quantum compound wiretap channel with channel state information at the transmitter.

  19. Microbiological disproportionation of inorganic sulfur compounds

    Finster, Kai

    2008-01-01

    The disproportionation of inorganic sulfur intermediates at moderate temperatures (0-80 °C) is a microbiologically catalyzed chemolithotrophic process in which compounds like elemental sulfur, thiosulfate, and sulfite serve as both electron donor and acceptor, and generate hydrogen sulfide...... and sulfate. Thus the overall process is comparable to the fermentation of organic compounds such as glucose and is consequently often described as 'inorganic fermentation'. The process is primarily carried out by microorganisms with phylogenetic affiliation to the so called sulfate-reducing bacteria within...

  20. Oxidation kinetics of UPb3 compound

    UPb3 is planned to be used as a shielding material for high energy gamma, but there are some problems associated with its oxidation in air. Therefore, the oxidation behaviour of this compound was investigated in dry air using TG-DTA. The compound was oxidized at different heating rates from room temperature to 1073 K. The isothermal weight gain data at 473 K, 623 K, 773 K and 973 K, was used to find the activation energy of oxidation of UPb3. (author)

  1. Double emulsion in a compound droplet

    Terwagne, Denis; Gilet, Tristan; Vandewalle, Nicolas; Dorbolo, Stéphane

    2010-01-01

    A compound drop is made of a millimetric water drop encapsulated in an oil shell. They are obtained by merging one drop of each component (water and oil). Afterwards, they are laid on a high viscosity oil bath which is vertically vibrated. When the forcing acceleration is higher than a given threshold Γth, compound drops can bounce on the surface. We show that above a second threshold Γe > Γth some oil contained in the shell enters in the inner water droplet forming a stable double emulsion.

  2. Dissipation and the population of compound nuclei

    The importance of nuclear dissipative efforts on the formation of compound nuclei is studied with the γ-ray decay of the giant dipole resonance (GDR) built on highly excited states. The compound nuclei 164Yb, 160Er, and 110Sn were produced with very mass-asymmetric and with more mass-symmetric target/projectile combinations. The large deviation from statistical model prediction observed in the γ-ray spectra from the more symmetrically formed 160Er and 164Yb can be qualitatively explained within the particle exchange model

  3. Bioactive compounds from Iostephane heterophylla (Asteraceae).

    Aguilar, M I; Delgado, G; Hernández, M L; Villarreal, M L

    2001-01-01

    The novel bisabolene sesquiterpenes 3-6, were isolated from Iostephane heterophylla, using bioguided fractionation. The new compounds were determined to be (12R/12S)-12,13-epoxy-xanthorrhizols (3,4) and (12R/12S)-12,13-dihydro-12,13-dihydroxy-xanthorrizols (5,6) and their structures were characterized by analysis of spectroscopic data and by chemical correlation from xanthorrhizol (2). The stereochemistry at C-12 of 5 was deduced using the modified Mosher experiment. Some of the isolated compounds elicited activity against gram positive and gram negative bacteria, levadura and dermatophytes. PMID:11561451

  4. Improvements in or relating to cerium compounds

    A process for the preparation of a dispersible cerium compound comprises heating a substantially dry cerium (IV) oxide hydrate in the presence of a deaggregating agent to cause deaggregation of aggregated crystallites in the cerium (IV) oxide hydrate and produce a dry dispersible cerium compound. The deaggregating agent is an acid species e.g. NO3-, Cl- or ClO4-. The dry dispersible product may be mixed with an aqueous medium to form a colloidal dispersion and if the dispersion is allowed to dry, a gel. (author)

  5. Phonological Processes in Complex and Compound Words

    Alieh Kord Zaferanlu Kambuziya

    2016-02-01

    Full Text Available Abstract This research at making a comparison between phonological processes in complex and compound Persian words. Data are gathered from a 40,000-word Persian dictionary. To catch some results, 4,034 complex words and 1,464 compound ones are chosen. To count the data, "excel" software is used. Some results of the research are: 1- "Insertion" is the usual phonological process in complex words. More than half of different insertions belongs to the consonant /g/. Then /y/ and // are in the second and the third order. The consonant /v/ has the least percentage of all. The most percentage of vowel insertion belongs to /e/. The vowels /a/ and /o/ are in the second and third order. Deletion in complex words can only be seen in consonant /t/ and vowel /e/. 2- The most frequent phonological processes in compounds is consonant deletion. In this process, seven different consonants including /t/, //, /m/, /r/, / ǰ/, /d, and /c/. The only deleted vowel is /e/. In both groups of complex and compound, /t/ deletion can be observed. A sequence of three consonants paves the way for the deletion of one of the consonants, if one of the sequences is a sonorant one like /n/, the deletion process rarely happens. 3- In complex words, consonant deletion causes a lighter syllable weight, whereas vowel deletion causes a heavier syllable weight. So, both of the processes lead to bi-moraic weight. 4- The production of bi-moraic syllable in Persian is preferable to Syllable Contact Law. So, Specific Rules have precedence to Universals. 5- Vowel insertion can be seen in both groups of complex and compound words. In complex words, /e/ insertion has the most fundamental part. The vowels /a/ and /o/ are in the second and third place. Whenever there are two sequences of ultra-heavy syllables. By vowel insertion, the first syllable is broken into two light syllables. The compounds that are influenced by vowel insertion, can be and are pronounced without any insertion

  6. Compound Synchronization of Four Chaotic Complex Systems

    Junwei Sun

    2015-01-01

    Full Text Available The chaotic complex system is designed from the start of the chaotic real system. Dynamical properties of a chaotic complex system in complex space are investigated. In this paper, a compound synchronization scheme is achieved for four chaotic complex systems. According to Lyapunov stability theory and the adaptive control method, four chaotic complex systems are considered and the corresponding controllers are designed to realize the compound synchronization scheme. Four novel design chaotic complex systems are given as an example to verify the validity and feasibility of the proposed control scheme.

  7. Photostimulated exoemission from some organic compounds

    Photostimulated exoemission from polyethylene and some organic low-molecular model compounds: C22H46 and C19H38O containing functional C=O group, was investigated. Time dependences of intensity of photostimulated exoemission when illuminating with a mercury-quartz lamp and spectral photoemission distribution for initial specimens and for specimens subjected to ultraviolet radiation (photolysis) or 60Co gamma radiation (radiolysis) have been investigated. The developed approach to the investigation of phenomena of photostimulated emission from organic compounds based on simultaneous recording of photocurrent and photochemical transformations permits to elucidate the formation mechanism of surface traps during illumination, stabilization of charges formed and the trap nature

  8. Design of artificial spherical superposition compound eye

    Cao, Zhaolou; Zhai, Chunjie; Wang, Keyi

    2015-12-01

    In this research, design of artificial spherical superposition compound eye is presented. The imaging system consists of three layers of lens arrays. In each channel, two lenses are designed to control the angular magnification and a field lens is added to improve the image quality and extend the field of view. Aspherical surfaces are introduced to improve the image quality. Ray tracing results demonstrate that the light from the same object point is focused at the same imaging point through different channels. Therefore the system has much higher energy efficiency than conventional spherical apposition compound eye.

  9. Synthesis of Dibenzylidene Sorbitol Series Compound

    FENG Rongxiu; CHEN Ligong; HOU Zhongke; SONG Jian

    2007-01-01

    A series of alditol derivatives were designed and synthesized with relatively high yield. On the basis of reaction between sorbitol and a series of substituted benzaldehyde in the presence of an acid catalyst, a series of acetal derivatives were synthesized through free hydroxyl esterification. D-sorbitol acetal amido derivatives were prepared by reduction of nitryl and acylation of amino. Dsorbitol acetal carboxyl esterification derivatives were prepared through esterification and hydrolysis. By high performance liquid chromatography-mass spectra (HPLC-MS) and H nuclear magneticresonance spectra (1 H-NMR), 36 compounds prepared were identified. Among these derivatives prepared, 26 compounds have not been reported in the previous literatures.

  10. Impulse Plasma Deposition (IPD) of Compound powder

    Different powder materials have been deposited by Impulse plasma Deposition(IPD) using coaxial plasma accelerator. Commercial compound powder is placed at the breach of the plasma accelerator. For discharge energy of 208 Joule, the deposited layer thickness was 3 nm/pulse. Analyses showed that the deposited layer consists of the different materials in the powder compound. Plasma current sheath carried the powder ions has been studied experimentally and theoretically. The grain size distribution for the deposited materials showed that most of the grain size is 2 um with Maxwellian distribution

  11. Detection of Metallic Compounds in Rocket Plumes

    Rogers, Chris; Dunn, Dr. Robert

    1998-04-01

    Recent experiments using metal mixed in hydroxyl-terminated polybutadiene (HTPB) fuel grains in small hybrid rocket indicates ion detectors may be effective in detection of metallic compounds in rocket plumes. We wanted to ascertain the extent to which the presence of metallic compounds in rocket plumes could be detected using ion probes and Gaussian rings. Charges that collide with or pass near the intruding probe are detected. Gaussian rings, short insulated cylindrical Gaussian surfaces, enclose the plume without intruding into the plume. Charges in the plume are detected by currents they induce in the cylinder.

  12. Volatile compound formation during argan kernel roasting.

    El Monfalouti, Hanae; Charrouf, Zoubida; Giordano, Manuela; Guillaume, Dominique; Kartah, Badreddine; Harhar, Hicham; Gharby, Saïd; Denhez, Clément; Zeppa, Giuseppe

    2013-01-01

    Virgin edible argan oil is prepared by cold-pressing argan kernels previously roasted at 110 degrees C for up to 25 minutes. The concentration of 40 volatile compounds in virgin edible argan oil was determined as a function of argan kernel roasting time. Most of the volatile compounds begin to be formed after 15 to 25 minutes of roasting. This suggests that a strictly controlled roasting time should allow the modulation of argan oil taste and thus satisfy different types of consumers. This could be of major importance considering the present booming use of edible argan oil. PMID:23472454

  13. Polymers contamination by heavy metal compounds

    Jovanić Saša

    2002-01-01

    Full Text Available The contamination of important synthetic (surface unmodified polymers by various heavy metal compounds (such as copper, manganese and lead in aqueous medium was investigated in this study. The influence of the pH of the aqueous medium, temperature and metal type on contamination was investigated during a 10 day period. It was found that increasing pH contributed to higher polymer contamination (at higher pH 100 times for copper and up to 400 times for lead, as well as contact with easily penetrable substances. Increasing temperature decreased contamination by the metal compound for PELD and PET which was not the case for PEHD and PR.

  14. Broad spectrum antibiotic compounds and use thereof

    Koglin, Alexander; Strieker, Matthias

    2016-07-05

    The discovery of a non-ribosomal peptide synthetase (NRPS) gene cluster in the genome of Clostridium thermocellum that produces a secondary metabolite that is assembled outside of the host membrane is described. Also described is the identification of homologous NRPS gene clusters from several additional microorganisms. The secondary metabolites produced by the NRPS gene clusters exhibit broad spectrum antibiotic activity. Thus, antibiotic compounds produced by the NRPS gene clusters, and analogs thereof, their use for inhibiting bacterial growth, and methods of making the antibiotic compounds are described.

  15. Which Is The Best Sandwich Compound? Hexaphenylbenzene Substituted By Sandwich Compounds Bearing Sc, Cr, and Fe.

    Ramos, Estrella; Martínez, Ana; Rios, Citlalli; Salcedo, Roberto

    2015-11-25

    The electronic properties of nine different hexaarylbenzene molecules substituted by sandwich compounds have been studied by applying density functional theory. Different structures and the particular electron donor power of these systems have been considered in order to analyze their oxidant capacity, using bis(ciclopentadienyl) scandium, ferrocene, and bis(benzene)chromium as sandwich compounds. Both monometallic and bimetallic combinations are investigated. According to the ionization energies and electron affinities, compounds with Cr are nucleophiles and represent the best electron donors, whereas compounds with Sc are electrophiles and represent the best electron acceptors. The worse electron donor or acceptor is hexakis(4-ferrocenyl phenyl) benzene. This is very significant, as it implies that the very well-known electronic properties of hexakis(4-ferrocenyl phenyl) benzene can be improved by substituting with other metals, such as Sc and Cr. This suggests several possible applications for these compounds. PMID:26528582

  16. Fluorescent compounds for plastic scintillation applications

    Several 2-(2'-hydroxyphenyl)benzothiazole, -benzoxazole, and -benzimidazole derivatives have been prepared. Transmittance, fluorescence, light yield, and decay time characteristics of these compounds have been studied in a polystyrene matrix and evaluated for use in plastic scintillation detectors. Radiation damage studies utilizing a 60C source have also been performed

  17. Flavor compounds of popped amaranth seeds

    Gamel, T.H.; Linssen, J.P.H.

    2008-01-01

    Amaranth caudatus seeds were popped and studied for optimal popping conditions and flavor compounds. The optimum popping temperature for the seeds was 180C. At this temperature, the expansion volume, flake size and unpopped kernel proportion were 9.4¿11.3 cm3/g, 0.010¿0.012 cm/g and 10¿2%, respectiv

  18. Reduction of Compound Lotteries with Objective Probabilities

    Harrison, Glenn W.; Martínez-Correa, Jimmy; Swarthout, J. Todd

    2015-01-01

    -stages compound lotteries, and their actuarially equivalent one-stage lotteries. We find violations of ROCL and that behavior is better characterized by a source-dependent version of the Rank-Dependent Utility model rather than Expected Utility Theory. Since we use the popular “1-in-K” random lottery incentive...

  19. Model compound vulcanization studied by XANES

    Taweepreda, W; Nu-Mard, R [Membrane Science and Technology Research Center, Polymer Science Program, Faculty of Science, Prince of Songkla University, Hat-Yai, Songkhla, 90112 (Thailand); Pattanasiriwisawa, W; Songsiriritthigul, P, E-mail: wirach.t@psu.ac.t [Synchrotron Light Research Institute, 111 University Avenue, Muang, Nakhon Ratchasima 30000 (Thailand)

    2009-11-15

    Squalene has been used as a model compound for the investigation of sulphur crosslink in the vulcanization process. The effects of the accelerator on the crosslink were deduced from the sulfur K-edge absorption spectra. The majority of the crosslinks for the squalene vulcanized with ZDEC or TMTD is likely disulfidic, while that vulcanized with CBS or MBTS is monosulfidic.

  20. Atmospheric lifetimes of selected fluorinated ether compounds

    Heathfield, A.E.; Anastasi, C.; Pagsberg, Palle Bjørn;

    1998-01-01

    Atmospheric lifetimes have been estimated for a selection of ethers, the latter representing a class of compounds being considered as replacements for chlorofluorocarbons. The estimates are based on laboratory measurements of rate constants for the reaction of the OH radical with the ethers, and ...

  1. Practical Applications of the Compound Pendulum.

    Hinrichsen, Peter F.

    1981-01-01

    Examples of the application of compound pendulum theory to the practical measurement of the moments of inertia of human beings, farm tractors, and sailing boats are presented. Suggests developing laboratory experiments to measure moments of inertia of hockey sticks, golf clubs, and frisbees, among others. (Author/SK)

  2. Crystallization of compound plastic optical fibers

    Ramos, J.I.; Blanco-Rodriguez, F.J. [Malaga Univ., Malaga (Spain). School of Engineering

    2010-07-01

    Melt-spinning processes are often used to manufacture optical, textile, electrically conducting and reinforced fibers. This paper proposed a single-phase two-dimensional model of the spinning of compound plastic optical fibers that used a Newtonian rheology modified by the degrees of crystallization and molecular orientation. The model accounted for temperature through an effective dynamic viscosity, and the molecular orientation of the liquid crystalline polymer through an orientation parameter that depended on the velocity field. For slender fibers, an asymptotic procedure based on the slenderness ratio showed that the temperature was uniform across the compound fiber provided that the Biot number was in the order of the fourth power of the slenderness ratio and the leading-order equations for the fiber's geometry and axial velocity component, temperature, molecular orientation and crystallization were one-dimensional. This paper also proposed a two-dimensional model based on the leading-order equations for the fiber's geometry and velocity for slender fibers. This model provided the two-dimensional fields of temperature, molecular orientation and degree of crystallization and indicated that for moderate Biot numbers, the temperature distribution across the fiber was not uniform and a thermal boundary layer was formed on the outer surface of the compound fiber. The study showed that the crystallization of the compound fiber affected primarily by thermal effects rather than by flow-induced effects. 17 refs., 1 tab., 7 figs.

  3. New hydrotalcite-like compounds containing yttrium

    Fernandez, J.M.; Barriga, C.; Ulibarri, M.A. [Universidad de Cordoba (Spain)] [and others

    1997-01-01

    The synthesis of hydrotalcite-type compounds containing yttrium was carried out by the coprecipitation of Mg(II), Al(III), and Y(III) cations at 60 degrees C with strong alkaline solutions. Thermal treatments were applied and changes studied.

  4. Iron(III) spin crossover compounds

    van Koningsbruggen, PJ; Maeda, Y; Oshio, H

    2004-01-01

    In this chapter, selected results obtained so far on Fe(III) spin crossover compounds are summarized and discussed. Fe(III) spin transition materials of ligands containing chalcogen donor atoms are considered with emphasis on those of N,N-disubstituted-dithiocarbamates, N,N-disubstituted-XY-carbamat

  5. Quantum chemical studies of estrogenic compounds

    Quantum chemical methods are potent tools to provide information on the chemical structure and electronic properties of organic molecules. Modern computational chemistry methods have provided a great deal of insight into the binding of estrogenic compounds to estrogenic receptors (ER), an important ...

  6. Synthesis of Novel Dipyrazolopyrimidine Fused Heterotricyclic Compounds

    张晓弘; 金桂玉

    2005-01-01

    Novel fused heterotricyclic compounds 3—6 containing two different dipyrazolopyrimidine framework were prepared from 1a—1d. The reaction of 1 with K2CO3 in DMSO or NaH in DMF led to the formation of 2 or 3, respectively, which reacted further to afford 6 or 5, respectively.

  7. Superconducting graphite intercalation compounds with calcium

    Emery, N.; Hérold, C.; Marêché, J.-F.; Lagrange, P.; Bellouard, C.; Lamura, G.; Di Gennaro, E.; Andreone, A.

    2008-04-01

    In the graphite-lithium-calcium system, four well-defined intercalation compounds were synthesised. Two of them, CaC 6 and Li 3Ca 2C 6, exhibit superconducting properties at 11.5 K and 11.15 K, respectively, the highest critical temperatures among those of graphite intercalation compounds. The samples are synthesised using a liquid-solid method allowing the preparation of pure bulk samples, auspicious for crystallographic and magnetic measurements. The crystal structure of CaC 6 was entirely specified; this compound crystallises in the R-3 m space group. The two-dimensional unit cell of Li 3Ca 2C 6 is hexagonal and commensurate with that of graphite and the intercalated sheets, very rich in metal, are seven-layered. The magnetic properties of these phases were studied with an applied field parallel and perpendicular to the graphene sheets. In both cases the magnetic phase diagram indicates that these compounds are type II superconducting materials slightly anisotropic in spite of their lamellar structure. In the case of CaC 6, in-plane magnetic penetration depth measurements show a clear exponential behaviour at low temperatures, consistent with an s-wave symmetry of the gap function, well fitted by the standard BCS theory in the dirty limit.

  8. Visualizing Compound Rotations with Virtual Reality

    Flanders, Megan; Kavanagh, Richard C.

    2013-01-01

    Mental rotations are among the most difficult of all spatial tasks to perform, and even those with high levels of spatial ability can struggle to visualize the result of compound rotations. This pilot study investigates the use of the virtual reality-based Rotation Tool, created using the Virtual Reality Modeling Language (VRML) together with…

  9. Michael Addition Reaction of Fluorinated Nitro Compounds

    郇凤; 胡华伟; 黄焰根; 陈庆云; 郭勇

    2012-01-01

    The Michael addition reactions of fluorinated nitro compounds with electron deficient olefins to give γ-fiuoro-γ-nitro-esters, nitriles and ketones which bear a fluorinated quaternary carbon center were reported. The reactions were promoted by TMG, affording the desired adducts in acceptable to good yields.

  10. Helium compounds and solidification of α particles

    Helium is not rare gas in the universe, and also not inert gas, for there are Helium com- pounds, α-Particles emitted from plutonium can be solidified based on the formation of helium compounds, then, the coefficient expansion of plutonium is negligible with such a solidification, otherwise, will be remarkable to 6.8%. (author)

  11. Excretion of biliary compounds during intrauterine life

    Rocio IR Macias; Jose JG Marin; Maria A Serrano

    2009-01-01

    In adults, the hepatobiliary system, together with thekidney, constitute the main routes for the eliminationof several endogenous and xenobiotic compounds intobile and urine, respectively. However, during intrauterinelife the biliary route of excretion for cholephiliccompounds, such as bile acids and biliary pigments, isvery poor. Although very early in pregnancy the fetal liver produces bile acids, bilirubin and biliverdin, these compounds cannot be efficiently eliminated by the fetal hepatobiliary system, owing to the immaturity of the excretory machinery in the fetal liver. Therefore, the potentially harmful accumulation of cholephilic compounds in the fetus is prevented by their elimination across the placenta. Owing to the presence of detoxifying enzymes and specific transport systems at different locations of the placental barrier, such as the endothelial cells of chorionic vessels and trophoblast cells, this organ plays an important role in the hepatobiliary-like function during intrauterine life. The relevance of this excretory function in normal fetal physiology is evident in situations where high concentrations of biliary compounds are accumulated in the mother. This may result in oxidative stress and apoptosis, mainly in the placenta and fetal liver, which might affect normal fetal development and challenge the fate of the pregnancy. The present article reviews current knowledge of the mechanisms underlying the hepatobiliary function of the fetal-placental unit and the repercussions of several pathological conditions on this tandem.

  12. Phthalates and organophosphorus compounds in indoor dust

    Hwang, H.; Lee, S.; Lim, J.; Joen, S.; Mikuška, Pavel; Kumar, A.

    Pensacola: Society of Environmental Toxicology and Chemistry (SETAC), 2010. s. 360. ISBN 1087-8939. [SETAC North America Annual Meeting /31./. 07.11.2010-11.11.2010, Portland] Institutional research plan: CEZ:AV0Z40310501 Keywords : indoor floor dust * phthalates * organophosphorus compounds Subject RIV: CB - Analytical Chemistry, Separation

  13. Baseline isotopic data of polyhalogenated compounds

    The δ 2H- and δ 13C-values of polyhalogenated compounds were determined by EA-IRMS. Most of the compounds were related to the chloropesticides DDT and its metabolites, hexachlorocyclohexanes, and toxaphene, as well as several polybrominated compounds such as bromophenols and -anisoles. δ 2H-values ranged between -235 per mille and +75 per mille whereas δ 13C-values were found in the range -22 per mille to -38 per mille . No correlation between δ 2H- and δ 13C-values could be identified. Comparative analysis clarified that bromophenols and the corresponding bromoanisoles may vary in their isotopic distribution. 2H NMR was used to quantify abundances of 2H isotopomers. Quantification of isotopomers of 2,4-dibromophenol and 2,4-dibromoanisole proved that both compounds from different suppliers do not originate from the same source. Differences in the δ 2H-values of two toxaphene products were further investigated by the synthesis of products of different degree of chlorination from camphene. It was shown that the δ 13C-values remained mostly unaltered as was expected since no carbon is lost in this procedure. However, the reaction products became enriched in 2H with increasing degree of chlorination. Different δ 2H-values of the starting material will also impact the δ 2H-values of the chlorination products

  14. Spatial Information Capacity of Compound Eyes

    Snyder, Allan W.; Stavenga, Doekele G.; Laughlin, Simon B.

    1977-01-01

    The capacity of the compound eye to perceive its spatial environment is quantified by determining the number of different pictures that can be reconstructed by its array of retinula cells. We can then decide on the best compromise between an animal's capacity for fine detail and contrast sensitivity

  15. Synthesis and characterization of volatile technetium compound

    Technetium-99 is an important fission (T1/2 = 2.13.105 y) product of the nuclear industry. Technetium in its highest oxidation state (VII) is highly mobile and can represent a threat to the environment. There are over 55 million gallons of high level mixed waste located at the Hanford site. Waste tanks at the Hanford site contain Tc that could potentially leak, and in the context of management of technetium, a glass waste form was proposed to counteract the issue. In the process of synthesizing melt glass between the temperatures of 600°C and 1100°C, volatile technetium compounds were observed in the reaction tube. These compounds displayed characteristic colors based upon the reaction environments of either breathing air or nitrogen gas. A breathing air atmosphere produces a red compound that adheres to the walls of the reaction tube. An atmosphere of nitrogen gas produces a white compound that was observed on the walls of the reaction tube. (author)

  16. Self injection of Dichlorvos, an Organophosphorus Compound

    Sujeet Raina

    2008-07-01

    Full Text Available We report two patients who injected themselves a strong organophosphate compound, dichlorvas, and showed the typical clinical picture of organophosphate intoxication. There are very few case reports of parenteral organophosphorous poisoning. With the appropriate therapy, their symptoms disappeared in a few days. The cases are reported because of unusual and interesting way of intoxication.

  17. Effects of uranium compounds on skin

    The following uranium compounds were topically applied to the dorsal skin of 35 day-old Wistar rats (60 g, male): uranium dioxide, uranyl nitrate, uranyl acetate, ammonium uranyl tricarbonate and ammonium diuranate. Percutaneous absorption was mediated with the aid of a vehicle and known quantities of various particle-sized batches of uranium compounds were directly implanted in the subcutaneous tissue. Animals were sacrificed 3, 6, 24 and 48 hours after implantation. Subcutaneous tissue and muscle underneath the implantation site were anlaysed by light and electron microscopy. A Cameca 322 X-ray microanalyzer was used to analyze uranium traces in calcified tissue (bones and teeth) and kidneys. A steady loss in body weight was observed in animals given high concentration of uranyl nitrate and ammonium uranyl tricarbonate. All animals died five days after the onset of the experiment due to renal failure. Slightly soluble compounds, ammonium diuranate and uranyl acetate, caused only a slight decrease in body weight. Uranium dioxide, the most insoluble compound used, induced only a transitory slight body weight decrease. Histopathological study revealed damages to the tissues of topicated skin, hair follicles and adnexal glands. High concentration of uranium was indicated in bone, teeth and kidneys by X-ray scanning

  18. PubChem Substance and Compound databases.

    Kim, Sunghwan; Thiessen, Paul A; Bolton, Evan E; Chen, Jie; Fu, Gang; Gindulyte, Asta; Han, Lianyi; He, Jane; He, Siqian; Shoemaker, Benjamin A; Wang, Jiyao; Yu, Bo; Zhang, Jian; Bryant, Stephen H

    2016-01-01

    PubChem (https://pubchem.ncbi.nlm.nih.gov) is a public repository for information on chemical substances and their biological activities, launched in 2004 as a component of the Molecular Libraries Roadmap Initiatives of the US National Institutes of Health (NIH). For the past 11 years, PubChem has grown to a sizable system, serving as a chemical information resource for the scientific research community. PubChem consists of three inter-linked databases, Substance, Compound and BioAssay. The Substance database contains chemical information deposited by individual data contributors to PubChem, and the Compound database stores unique chemical structures extracted from the Substance database. Biological activity data of chemical substances tested in assay experiments are contained in the BioAssay database. This paper provides an overview of the PubChem Substance and Compound databases, including data sources and contents, data organization, data submission using PubChem Upload, chemical structure standardization, web-based interfaces for textual and non-textual searches, and programmatic access. It also gives a brief description of PubChem3D, a resource derived from theoretical three-dimensional structures of compounds in PubChem, as well as PubChemRDF, Resource Description Framework (RDF)-formatted PubChem data for data sharing, analysis and integration with information contained in other databases. PMID:26400175

  19. Adsorption of Organic Compounds to Building Products

    Kjær, Ulla Dorte

    The presence of VOCs (Volatile Organic Compounds) in the indoor air may be a contributory cause of complaints about irritation of mucous membranes in eyes, nose and throat, difficulty in breathing, frequent airway inflammation, skin irritation, fatigue, concentration difficulty, dizziness and...

  20. Special Heusler compounds for spintronic applications

    Balke, B.

    2007-07-01

    This work emphasizes the potential of Heusler compounds in a wide range of spintronic applications. Using electronic structure calculations it is possible to design compounds for specific applications. Examples for GMR and TMR applications, for spin injection into semiconductors, and for spin torque transfer applications will be shown. After a detailed introduction about spintronics and related materials chapter 5 reports about the investigation of new half-metallic compounds where the Fermi energy is tuned in the middle of the gap to result in more stable compounds for GMR and TMR applications. The bulk properties of the quaternary Heusler alloy Co{sub 2}Mn{sub 1-x}Fe{sub x}Si with the Fe concentration ranging from x=0 to 1 are reported and the results suggest that the best candidate for applications may be found at an iron concentration of about 50%. Due to the effect that in the Co{sub 2}Mn{sub 1-x}Fe{sub x}Si series the transition metal carrying the localized moment is exchanged and this might lead to unexpected effects on the magnetic properties if the samples are not completely homogeneous chapter 6 reports about the optimization of the Heusler compounds for GMR and TMR applications. The structural and magnetic properties of the quaternary Heusler alloy Co{sub 2}FeAl{sub 1-x}Si{sub x} with varying Si concentration are reported. From the combination of experimental (better order for high Si content) and theoretical findings (robust gap at x=0.5) it is concluded that a compound with an intermediate Si concentration close to x=0.5-0.7 would be best suited for spintronic applications, especially for GMR and TMR applications. In chapter 7 the detailed investigation of compounds for spin injection into semiconductors is reported. It is shown that the diluted magnetic semiconductors based on CoTiSb with a very low lattice mismatch among each other are interesting materials for spintronics applications like Spin-LEDs or other spin injection devices. Chapter 8 refers

  1. Synthesis of a naphthalene-hydroxynaphthalene polymer model compound

    1991-10-02

    The objective of this project was the synthesis of one pound of a new naphthalene-hydroxynaphthalene polymer model compound for use in coal combustion studies. Since this compound was an unreported compound, this effort also required the development of a synthetic route to this compound (including routes to the unique and unreported intermediates leading to its synthesis).

  2. Tritium labeling of organic compounds deposited on porous structures

    Ehrenkaufer, Richard L. E.; Wolf, Alfred P.; Hembree, Wylie C.

    1979-01-01

    An improved process for labeling organic compounds with tritium is carried out by depositing the selected compound on the extensive surface of a porous structure such as a membrane filter and exposing the membrane containing the compound to tritium gas activated by the microwave discharge technique. The labeled compound is then recovered from the porous structure.

  3. Boron-containing amino carboxylic acid compounds and uses thereof

    Novel compounds which are useful for boron neutron capture therapy (BNCT) are disclosed. The compounds comprise a stable boron-containing group and an aminocycloalkane carboxylic acid group or a boronated acyclic hydrocarbon-linked amino carboxylic acid. Methods for synthesis of the compounds and for use of the compounds in BNCT are disclosed

  4. Compositions containing borane or carborane cage compounds and related applications

    Bowen, III, Daniel E; Eastwood, Eric A

    2013-05-28

    Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

  5. Compositions containing borane or carborane cage compounds and related applications

    Bowen, III, Daniel E; Eastwood, Eric A

    2014-11-11

    Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

  6. Compositions containing borane or carborane cage compounds and related applications

    Bowen, III, Daniel E.; Eastwood, Eric A.

    2015-09-15

    Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

  7. Student Evaluation of Online Pharmaceutical Compounding Videos.

    Park, Hanna L; Shrewsbury, Robert P

    2016-03-25

    Objective. To describe pharmacy students' views on the effectiveness of an expansion of the compounding laboratory website at the UNC Eshelman School of Pharmacy. Methods. Originally, there were 39 videos and three animations available. In 2011, an additional 59 videos and two animations were added. Concurrently, all of the interactive questions were updated to fully integrate with the expanded video library. Students were surveyed about the expanded video library regarding accessibility, functionality, and usefulness, and how using the library impacted their learning of compounding. Surveys were analyzed with descriptive statistics. Means and SDs were calculated for the rating scale questions; independent t tests and Wilcoxon nonparametric tests were used to find differences between professional classes and campuses. Analytical results were evaluated with a one-way analysis of variance (ANOVA), z test, and a homogeneity of variance (Levene's) test. Results. The response rate to the survey was 85%. Compounding videos were used by 386/391 students. Thirty-four percent of students used the videos an average of 30 minutes or less per week; 56% used the videos 1-2 hours per week. Approximately 80% of students were satisfied with the functionality and accessibility of the videos. All students, regardless of professional year or campus affiliation, put their confidence/competence at about 70% of the rating scale. Conclusions. As no standardized compounding curriculum was found in US schools of pharmacy and students reported being satisfied with the website, it could be an accessible, functional, and useful resource for pharmaceutical compounding in schools of pharmacy. PMID:27073283

  8. New compounds as potential radio diagnosticians Alzheimer

    Alzheimer's disease (AD) is the most common cause of dementia in Cuba and all over the World. According to demographic trends it has been called the epidemic of the century. It is characterized by the presence of neuropathological brain deposits: senile plaques, formed by neurofibrillary tangles (NT) and deposits of β-amyloid protein (Aß). Aß plaques could appear even 20 years before the establishment of first clinical symptoms of the disease. The aim of this study was to synthesize new naphthalene derivatives, feasible to be labeled with radionuclides emitters of either gamma radiation or positrons. These labeled compounds should be able to cross blood–brain barrier (BBB) in healthy and AD transgenic animals. As a result of this work, several synthetic precursors were synthesized, which were labeled with iodine-131, carbon-11 and fluorine-18 with a satisfactory radiochemical purity. The corresponding non-radioactive control compounds were also synthesized.In in vitro and in silico studies, obtained compounds showed affinity for the β-amyloid protein. According to SPECT and PET-CT images in healthy laboratory animals, obtained labeled compounds crossed BBB in a bi-directional way without any sign of brain uptake.Furthermore, evaluation of the biodistribution of the [18F] -2- (3-fluoropropyl) -6-methoxynaphthalene ([[18F] Amyloid® was performed in healthy animals.[[18F]Amylovis crossed blood brain barrier. Renal and hepatic pathways were the main excretion routes. On the other hand, in transgenic mice with AD, its uptake and its retention time were higher in comparison with healthy mice. Immunohistochemistry and Congo red staining of control and transgenic mice brain slices were performed to identify β-amyloid plaques.Conclusions: Obtained compounds were able to bi-directionally cross BBB.[[18F]Amylovis® could be a promising PET radiotracer for amyloid plaques visualization. (author)

  9. Sonochemical degradation of chlorinated organic compounds, phenolic compounds and organic dyes - A review

    Sonochemical processes have been widely used in chemistry and chemical engineering field. Recently, these processes have found new applications in the environmental field, because of advantages in terms of operational simplicity, secondary pollutant formation and safety. Several studies have reported on sonochemical degradation of organic compounds that are toxic in nature. The objective of this review was to identify and examine some of the studies on sonochmical degradation of chlorinated organic compounds, phenolic compounds and organic dyes. This review also examines the basic theory of sonochemical reactions and the use of sonochemical reactors for environmental applications

  10. SCOPE: A Scientific Compound Object Publishing and Editing System

    Kwok Cheung; Jane Hunter; Anna Lashtabeg; John Drennan

    2008-01-01

    This paper presents the SCOPE (Scientific Compound Object Publishing and Editing) system which is designed to enable scientists to easily author, publish and edit scientific compound objects. Scientific compound objects encapsulate the various datasets and resources generated or utilized during a scientific experiment or discovery process, within a single compound object, for publishing and exchange. The adoption of “named graphs” to represent these compound objects enables provenance informa...

  11. Fungal tools for the degradation of endocrine disrupting compounds

    Kabiersch, Grit

    2013-01-01

    Endocrine disrupting compounds are synthetic or natural compounds that mimic the action of hormones and thus disrupt or alter functions of the endocrine system usually through direct interactions with nuclear receptors. The main objective of this work was to develop strategies of how to degrade endocrine disrupting compounds and how to monitor the removal of the endocrine disrupting effect with focus on the estrogenic compound bisphenol A and on the virilizing compound tributyltin. Bisph...

  12. Raman scattering in transition metal compounds: Titanium and compounds of titanium

    Jimenez, J.; Ederer, D.L.; Shu, T. [Tulane Univ., New Orleans, LA (United States)] [and others

    1997-04-01

    The transition metal compounds form a very interesting and important set of materials. The diversity arises from the many states of ionization the transition elements may take when forming compounds. This variety provides ample opportunity for a large class of materials to have a vast range of electronic and magnetic properties. The x-ray spectroscopy of the transition elements is especially interesting because they have unfilled d bands that are at the bottom of the conduction band with atomic like structure. This group embarked on the systematic study of transition metal sulfides and oxides. As an example of the type of spectra observed in some of these compounds they have chosen to showcase the L{sub II, III} emission and Raman scattering in some titanium compounds obtained by photon excitation.

  13. Multiferroic Compounds with Double-Perovskite Structures

    Noriya Ichikawa

    2011-01-01

    Full Text Available New multiferroic compounds with double-perovskite structures were synthesized. Bi2NiMnO6 was synthesized in bulk form by high-pressure synthesis and also in a thin-film form by epitaxial growth. The material showed both ferromagnetic and ferroelectric properties, i.e., the multiferroic property at low temperature. Bi2FeCrO6 was also fabricated in a (1 1 1 oriented BiFeO3/BiCrO3 artificial superlattice, with a 1/1 stacking period. The superlattice film showed ferromagnetic behavior and polarization switching at room temperature. In the compounds, Bi3+ ion, located at the A site in the perovskite structure, caused ferroelectric structural distortion, and the B-site ordering of the Ni2+ and Mn4+ ions (Fe3+ and Cr3+ ions in a rock-salt configuration led to ferromagnetism according to the Kanamori-Goodenough rule.

  14. Compound Composite Odontoma and Its Management

    Morawala Abdul

    2014-01-01

    Full Text Available Odontomas are odontogenic benign tumors composed of dental tissue. Majority of these lesions are asymptomatic and are often detected on routine radiographs. They can be thought of as “tooth hamartomas" with the lesion consisting of various tooth components. They are divided histologically into complex odontomas and compound odontomas. This paper describes the case of a compound odontoma in a 13-year-old girl diagnosed due to the retention of the primary right mandibular second molar. A surgical excision was performed without disturbing the unerupted premolar. The results achieved indicate that early diagnosis of odontomas enables adoption of less complex treatment, a better prognosis, and displacement or devitalisation of adjacent tooth.

  15. Screening Some Plants for their Antiproliferative Compounds

    Ufuk Kolak

    2012-03-01

    Full Text Available This paper covers the screening of the secondary plant products to find a cure against cancer which were piled up during the years. In early stages of these studies highly active antitumor glycoproteins were obtained from native Arizona (USA plants. Later smaller molecules were isolated showing antitumor activity in different test systems. Among these compounds sesquiterpene lactones with an exo-methylene group in the lactone ring, unsaturated diterpenoids and some triterpenoids exhibited activity in vivo and in vitro test systems. A few Colchicum alkaloids showed high activity against murine lymphocytic leukemia (P388. Activity also established in some flavonoidal compounds. Today all around the world research on Natural Products is still going on.

  16. Two New Compounds from Hedyotis lindleyana.

    Kim, Tuyen Pham Nguyen; Mai, Tram Phan Thi; Phi, Phung Nguyen Kim

    2015-07-01

    One new sodium salt of an iridoid acid, sodium 6-O-methyldeacetylasperulosidate (1) and one new heterocyclic compound, 1,3,6-trimethylpyrano[2,3- d]imidazole-2,5(1H,3H)-dione (2) were isolated from Hedyotis lindleyana Hook. (Rubiaceae), together with seven known compounds, oleanolic acid (3), ursolic acid (4), teneoside D (5), 6β-hydroxygeniposide (6), deacetylasperulosidic acid sodium salt (7), liquiritin (8), and 3,3',4'-tri-O-methylellagic acid (9). The structures were established by spectroscopic (1D, 2D NMR) and HR-ESI-MS analysis, as well as by comparison with data reported in the literature. PMID:26410995

  17. Compound Composite Odontoma and Its Management

    Abdul, Morawala; Pragati, Kapila; Yusuf, Chunawala

    2014-01-01

    Odontomas are odontogenic benign tumors composed of dental tissue. Majority of these lesions are asymptomatic and are often detected on routine radiographs. They can be thought of as “tooth hamartomas" with the lesion consisting of various tooth components. They are divided histologically into complex odontomas and compound odontomas. This paper describes the case of a compound odontoma in a 13-year-old girl diagnosed due to the retention of the primary right mandibular second molar. A surgical excision was performed without disturbing the unerupted premolar. The results achieved indicate that early diagnosis of odontomas enables adoption of less complex treatment, a better prognosis, and displacement or devitalisation of adjacent tooth. PMID:25587458

  18. Production of aroma compounds in lactic fermentations.

    Smid, E J; Kleerebezem, M

    2014-01-01

    This review describes recent scientific research on the production of aroma compounds by lactic acid bacteria (LAB) in fermented food products. We discuss the various precursor molecules for the formation of aroma compounds in connection with the metabolic pathways involved. The roles of nonmetabolic properties such as cell lysis are also described in relation to aroma formation. Finally, we provide an overview of the literature on methods to steer and control aroma formation by LAB in mixed culture fermentations. We demonstrate that the technological progress made recently in high-throughput analysis methods has been driving the development of new approaches to understand, control, and steer aroma formation in (dairy) fermentation processes. This currently entails proposing new rules for designing stable, high-performance mixed cultures constituting a selection of strains, which in concert and on the basis of their individual predicted gene contents deliver the required functionalities. PMID:24580073

  19. Degradation of air polluted by organic compounds

    According to the Mexican standard NOM-010-STPS-1994 it has been established concentrations of maximum permissible levels in workable air for styrene in the range 420-1710 mg/m3 and for xylene between 218-870 mg/m3. In this work it is studied a biological treatment (bio filtration) for air polluted by xylene and styrene where the microorganisms are adhered at synthetic fiber, these degrade to the organic compounds that across in gaseous state and they are mineralized toward CO2 and H2O. The characteristics of temperature, p H, concentration of organic compound and mineral parameters, as well as, the biomass quantity have been optimized for that bio filters efficiency were greater than those reported in other works. (Author)

  20. Quaternary ammonium compounds – New occupational hazards

    Agnieszka Lipińska-Ojrzanowska

    2014-10-01

    Full Text Available Quaternary ammonium compounds (QACs, quats belong to organic ionic chemical agents which display unique properties of both surfactants and disinfectants. Their wide distribution in the work environment and also in private households brings about new occupational hazards. This paper reviews reports about the health effects of QACs. QACs could play a role of sensitizers and irritants to the skin and mucous membranes. It is suspected that particular QACs can display an immunologic crossreactivity between each other and with other chemical compounds containing ammonium ion, such as muscle relaxants widely used in anesthesia. They may promote the development of airway allergy, however, the background mechanisms are still unclear and need to be further investigated. Until now, a few cases of occupational asthma induced by QACs have been described and their involvement in contact dermatitis has been documented. The possibility of anaphylaxis due to QACs cannot be excluded as well. Med Pr 2014;65(5:675–682

  1. Development of labelled compound for neuroreceptor imaging

    Cho, J. H.; Oh, C. H.; Lee, K. S.; Lee, S. C. [Korea Institute of Science and Technology, Seoul (Korea)

    2000-03-01

    The purpose of this research and development is to develop the radioisotope labeled compound for serotonin neuroreceptor imaging. This serotonir receptor plays a key role in many neurological disease, such as anxiety and depression. Radio-Labeled compounds (Radio pharmaceuticals) has the advantage of early diagnosis and non-invasiveness. New arylpiplrazine ligand for imaging serotonin receptor 5HT{sub 1A} were synthesized. These ligand has a novel N{sub 2}S{sub 2} moiety of which deprotection process is expected to be much simple and to give high yield. New radiopharmaceuticals which was obtained as a results of this research will be developed as a diagnostic reagent. 5 refs. (Author)

  2. Intercalation compounds involving inorganic layered structures

    CONSTANTINO VERA R. L.

    2000-01-01

    Full Text Available Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.

  3. Reducing NOx emissions with Group IIIB compounds

    This patent describes improvement in a process for the catalytic cracking of a heavy hydrocarbon feed containing nitrogen compounds by contact with a circulating inventory of catalytic cracking catalyst to produce catalytically cracked products and spent catalyst containing coke comprising nitrogen compounds. The spent catalyst is regenerated by contact with oxygen or an oxygen-containing gas in a catalyst regeneration zone operating at catalyst regeneration conditions to produce hot regenerated catalyst which is recycled to catalytically crack the heavy feed and the catalyst regeneration zone produces a flue gas comprising CO, CO2 and oxides of nitrogen (NOx). The improvement comprises: reducing the NOx content of the flue gas by adding to the circulating catalyst inventory an additive comprising discrete particles comprising oxides of Group IIIB elements, exclusive of Group III elements which are ion exchanged or impregnated into the cracking catalyst, the additive being added in an amount sufficient to reduce the production of NOx relative to operation without the additive

  4. Study of oxalate compounds of nickel

    The Ni(NO3)2-M2C2O4-H2O(M=L+-Cs+, NH4+) in aqueous solutions at 25 deg C and molar relation C2O42-:Ni2+=0.5-8.0 are studied by the method of residual concentrations. It is established that the NiC2O4x2H2O(1) compound is formed in all systems in a solid phase, and Cs(Ni(C2O4)2)x4H2O(2) - in the system with cesium oxalate. Complex 2, unlike compound 1, dissolves well in water and does not dissolve in the cesium oxalate excess. At 150 deg C complex 2 losses crystallization water and in 310-500 deg C interval it decomposes with Cs2NiO2 formation

  5. Analysis of cell death inducing compounds

    Spicker, Jeppe; Pedersen, Henrik Toft; Nielsen, Henrik Bjørn;

    2007-01-01

    Biomarkers for early detection of toxicity hold the promise of improving the failure rates in drug development. In the present study, gene expression levels were measured using full-genome RAE230 version 2 Affymetrix GeneChips on rat liver tissue 48 h after administration of six different compounds......), ornithine aminotransferase (OAT) and Cytochrome P450, subfamily IIC (mephenytoin 4-hydroxylase) (Cyp2C29). RT-PCR for these three genes was performed and four additional compounds were included for validation. The quantitative RT-PCR analysis confirmed the findings based on the microarray data and using the...... three genes a classification rate of 55 of 57 samples was achieved for the classification of not toxic versus toxic. The single most promising biomarker (OAT) alone resulted in a surprisingly 100% correctly classified samples. OAT has not previously been linked to toxicity and cell death in the...

  6. Determination of Phenolic Compounds in Wines

    Charalampos Proestos

    2012-04-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 Wine contains natural antioxidants such as phenolic compounds also known as bioactive compounds. Samples of commercially available Greek wines were analyzed in order to determine this phenolic content. For the analysis, Reversed Phase-High Performance Liquid Chromatography (RP-HPLC coupled with a multiwavelength Ultraviolet/visible (UV/vis detector was used. The most abundant phenolic substances detected were (+-catechin (13.5-72.4 mg L-1 , gallic acid (0.40-99.47 mg L-1 and caffeic acid (0.87-33.48 mg L-1. The principal component analysis (PCA technique was used to study differentiation among wines according to their production area. Red wines contained more phenolic substances than white ones. Differences of the phenolic composition in wines of the same cultivar were investigated too.

  7. Optical spectroscopy of f-element compounds

    It is noted that the energies and intensities of transitions observed in the optical spectra of lanthanide (Ln) and actinide (An) compounds can typically be measured with a high degree of accuracy. The observed transitions can then be directly represented as upper state energy levels where the structure is induced by the environment. A discussion is presented of the systematic theoretical interpretation of these transitions both in terms of energy level structure and transition probability. Particularly for the trivalent lanthanides and actinides, the detail to which the interpretation can be carried is unique in the periodic table. The electronic structure of organometallic lanthanides and actinides is emphasized in the discussion. It is made clear that this type of ligand does not present any unique interpretive problems. The basic framework of the interpretation is not dependent upon the specific ionic environment. On the other hand, organometallic compounds represent a particularly interesting group in which to study excited state relaxation

  8. Brazilian gorgonians: a source of odoriferous compounds?

    Silvia Siag Oigman

    2015-12-01

    Full Text Available Abstract The gorgonian Phyllogorgia dilatata Esper is an octocoral known to be source of biologically active terpenes. In this study, odoriferous compounds present in P. dilatata tissues were investigated, due to their exotic olfactory notes. The search of volatile compounds was performed in a dichloromethane/methanol extract submitted to a silica gel vacuum chromatography and HPLC, yielding the isomers (Z,E and (E,E-germacrones, identified by GC/MS, 1 and 2D NMR. The stereochemistry of (E,E-germacrone, as well as its preferred conformation, was confirmed by NOESY. Sensory analysis of the two isomers revealed a fragrant, citrus, woody and weak marine odor, similar to the odor of the natural gorgonian, and (E,E-germacrone has a three times more intense aroma than the (Z,E isomer.

  9. Researches on vanadium and its compounds

    In this research thesis, the author proposes a new study of the action of some reduction agents on two groups of vanadium compounds, oxides and chlorides. Thus, he reports the study of the circumstances of reduction of vanadium oxides by carbon and of vanadium carburization from these compounds. He also reports the determination of the composition of vanadium melts obtained at high temperatures (either in a vacuum furnace or with an electric arc furnace). In order to determine in which conditions the processing of vanadium oxides could produce the pure metal, the author studied the action of calcium and magnesium on the vanadium pentoxide and trioxide. The second part of the thesis addresses the preparation of pure vanadium from vanadium anhydride chlorides. Then, the author reports the development of processes which could easily produce powdered vanadium

  10. Sound propagation in heavy fermion compounds

    Sound propagation experiments are used to investigate the superconducting (sc) phases of Heavy Fermion (HF) compounds. Velocity measurements lead to accurate B-T phase diagrams and results for the temperature dependent attenuation of all modes in UPt3 are presented. In addition to the strain-order parameter interaction for longitudinal modes there is a Lorentz force coupling of transverse modes to the normal electrons. It leads to a B-dependence of velocity and attenuation from which information about both London and skin penetration depth in URu2Si2 and UBe13 may be obtained. In UBe13 magnetoacoustic quantum oscillations are observed which prove the coexistence of light and heavy electrons in this compound. (orig.)

  11. Oxyfluoride Chemistry of Layered Perovskite Compounds

    Yoshihiro Tsujimoto

    2012-03-01

    Full Text Available In this paper, we review recent progress and new challenges in the area of oxyfluoride perovskite, especially layered systems including Ruddlesden-Popper (RP, Dion-Jacobson (DJ and Aurivillius (AV type perovskite families. It is difficult to synthesize oxyfluoride perovskite using a conventional solid-state reaction because of the high chemical stability of the simple fluoride starting materials. Nevertheless, persistent efforts made by solid-state chemists have led to a major breakthrough in stabilizing such a mixed anion system. In particular, it is known that layered perovskite compounds exhibit a rich variety of O/F site occupation according to the synthesis used. We also present the synthetic strategies to further extend RP type perovskite compounds, with particular reference to newly synthesized oxyfluorides, Sr2CoO3F and Sr3Fe2O5+xF2−x (x ~ 0.44.

  12. [Today's threat of use of organophosphorus compounds].

    Sokołowski, Rafał; Płusa, Tadeusz

    2015-09-01

    Organophosphates are stable cholinesterases inhibitors (AChE). Inhibition of AChE activity leads to the accumulation of large amounts of acetylcholine and hyperactivity of the cholinergic system by stimulating acetylcholine receptors - muscarinic and nicotinic. This group included tabun, sarin, soman and VX gases. Exposure to gaseous form causes symptoms within a few seconds of exposure. This depends on the gas concentration in the atmosphere. The most sensitive organ is the eyes and the respiratory system. Severe poisoning are characterized by the immediate loss of consciousness with convulsions. Therapeutic management of acute poisoning organophosphorus compounds boils down to treating symptomatic and supportive vital functions. Monitoring of cardiovascular, respiratory and renal failure in intensive care gives only guarantee the effective treatment of poisoning. Properties toxic organophosphorus compounds also are of interest to terrorist groups. PMID:26449583

  13. Organic compounds as indicators of air pollution

    Mølhave, Lars

    2003-01-01

    suchstandards. A major research need exist on the less adverse pollutants beforerecommendations or guidelines can be established. In the interim period a pre-caution principle should lead to an ALARA principle for these secondary cau-salities. It should be noted that volatile organic compound (VOC) as an...... IAQproblem still is in the end of a phase of ad hoc solutions, in the middle of aresearch phase and only in the beginning of a regulatory phase. Any final officialregulation in this area will have to be tentative and the final regulation mustawait further research. Total volatile organic compound (TVOC) is...... an indicatorfor the presence of VOC indoors. The TVOC indicator can be used in relation toexposure characterization and source identification but for VOCs only, not as anindictor of other pollutants and their health effects. In risk assessment the TVOCindicator can only be used as a screening tool...

  14. Flavor release and perception in hard candy: influence of flavor compound-compound interactions.

    Schober, Amanda L; Peterson, Devin G

    2004-05-01

    The influence of flavor compound-compound interactions on flavor release properties and flavor perception in hard candy was investigated. Hard candies made with two different modes of binary flavor delivery, (1) L-menthol and 1,8-cineole added as a mixture and (2) L-menthol and 1,8-cineole added separate from one another, were analyzed via breath analysis and sensory time-intensity testing. Single-flavor candy containing only L-menthol or 1,8-cineole was also investigated via breath analysis for comparison. The release rates of both L-menthol and 1,8-cineole in the breath were more rapid and at a higher concentration when the compounds were added to hard candy separate from one another in comparison to their addition as a mixture (conventional protocol). Additionally, the time-intensity study indicated a significantly increased flavor intensity (measured as overall cooling) for hard candy made with separate addition of these flavor compounds. In conclusion, the flavor properties of hard candy can be controlled, at least in part, by flavor compound-compound interactions and may be altered by the method of flavor delivery. PMID:15113168

  15. Aromatic compounds from three Brazilian Lauraceae species

    Batista, Andrea Nastri de Luca; Batista Junior, Joao Marcos; Lopez, Silvia Noeli; Furlan, Maysa; Cavalheiro, Alberto Jose; Silva, Dulce Helena Siqueira; Bolzani, Vanderlan da Silva [UNESP, Araraquara, SP (Brazil). Inst. de Quimica. Dept. de Quimica Organica; Nunomura, Sergio Massayoshi [Instituto Nacional de Pesquisa da Amazonia (INPA), Manaus, AM (Brazil). Dept. de Produtos Naturais; Yoshida, Massayoshi [Centro de Biotecnologia da Amazonia, Manaus, AM (Brazil)

    2010-07-01

    Phytochemical investigations on three Brazilian Lauraceae species from the Cerrado region of Sao Paulo State, Ocotea corymbosa (Meins) Mez., O. elegans Mez. and Persea pyrifolia Nees and Mart. ex Nees resulted in the isolation of flavonoids, an ester of the 4-O-E-caffeoylquinic acid, an aromatic sesquiterpene besides furofuran lignans. This is the first chemical study on the leaves of Ocotea elegans and O. corymbosa as well as the first report of non-volatile compounds from Persea pyrifolia. (author)

  16. Hemielectron method generalization for complex compound calculations

    A hemielectron method is considered as applied to the systems having one open shell (n electrons on m-fold degenerated level) or several open shells. General expressions for corrections to a total energy of the system and to energies of monoelectron levels, corresponding to an unfilled shell, are obtained. Using the [RuCl6]3- complex as an example, expendiency of the approach application to the calculation of electron structure of coordination compounds is shown

  17. Minor lipophilic compounds in edible insects

    Monika Sabolová; Anna Adámková; Lenka Kouřimská; Diana Chrpová; Jan Pánek

    2016-01-01

    Contemporary society is faced with the question how to ensure suffiecient nutrition (quantity and quality) for rapidly growing population. One solution can be consumption of edible insect, which can have very good nutritional value (dietary energy, protein, fatty acids, fibers, dietary minerals and vitamins composition). Some edible insects species, which contains a relatively large amount of fat, can have a potential to be a „good" (interesting, new) source of minor lipophilic compound...

  18. Thin Film Synthesis of Nickel Containing Compounds

    Lindahl, Erik

    2009-01-01

    Most electrical, magnetic or optical devices are today based on several, usually extremely thin layers of different materials.  In this thesis chemical synthesis processes have been developed for growth of less stable and metastable layers, and even multilayers, of nickel containing compounds. A chemical vapor deposition (CVD) method for deposition of metastable Ni3N has been developed.  The deposition process employs ammonia as nitrogen precursor. An atomic layer deposition (ALD) process for...

  19. Fission Barriers of Compound Superheavy Nuclei

    Pei, J C; Nazarewicz, W.; Sheikh, J. A.; Kerman, A. K.

    2009-01-01

    The dependence of fission barriers on the excitation energy of the compound nucleus impacts the survival probability of superheavy nuclei synthesized in heavy-ion fusion reactions. In this work, we investigate the isentropic fission barriers by means of the self-consistent nuclear density functional theory. The relationship between isothermal and isentropic descriptions is demonstrated. Calculations have been carried out for $^{264}$Fm, $^{272}$Ds, $^{278}$112, $^{292}$114, and $^{312}$124. F...

  20. Theoretical Investigation of Compounds with Triple Bonds

    Devarajan, Deepa

    2011-01-01

    In this thesis, compounds with potential triple-bonding character involving the heavier main-group elements, Group 4 transition metals, and the actinides uranium and thorium were studied by using molecular quantum mechanics. The triple bonds are described in terms of the individual orbital contributions (σ, π||, and π┴), involving electron-sharing covalent or donor–acceptor interactions between the orbitals of two atoms or fragmen...

  1. Tetrazolium Compounds: Synthesis and Applications in Medicine

    Cheng-Xi Wei; Ming Bian; Guo-Hua Gong

    2015-01-01

    Tetrazoles represent a class of five-membered heterocyclic compounds with polynitrogen electron-rich planar structural features. This special structure makes tetrazole derivatives useful drugs, explosives, and other functional materials with a wide range of applications in many fields of medicine, agriculture, material science, etc. Based on our research works on azoles and other references in recent years, this review covers reported work on the synthesis and biological activities of tetrazo...

  2. Tetrazolium Compounds: Synthesis and Applications in Medicine

    Cheng-Xi Wei

    2015-03-01

    Full Text Available Tetrazoles represent a class of five-membered heterocyclic compounds with polynitrogen electron-rich planar structural features. This special structure makes tetrazole derivatives useful drugs, explosives, and other functional materials with a wide range of applications in many fields of medicine, agriculture, material science, etc. Based on our research works on azoles and other references in recent years, this review covers reported work on the synthesis and biological activities of tetrazole derivatives.

  3. Steroidal Compounds in Commercial Parenteral Lipid Emulsions

    Siddiqui, Rafat A; Zaloga, Gary P; Mary Hise; Guy Dutot; Thomas Pavlina; Zhidong Xu; Harvey, Kevin A.

    2012-01-01

    Parenteral nutrition lipid emulsions made from various plant oils contain steroidal compounds, called phytosterols. During parenteral administration of lipid emulsions, phytosterols can reach levels in the blood that are many fold higher than during enteral administration. The elevated phytosterol levels have been associated with the development of liver dysfunction and the rare development of liver failure. There is limited information available in the literature related to phytosterol conce...

  4. Aromatic compounds from three Brazilian Lauraceae species

    Phytochemical investigations on three Brazilian Lauraceae species from the Cerrado region of Sao Paulo State, Ocotea corymbosa (Meins) Mez., O. elegans Mez. and Persea pyrifolia Nees and Mart. ex Nees resulted in the isolation of flavonoids, an ester of the 4-O-E-caffeoylquinic acid, an aromatic sesquiterpene besides furofuran lignans. This is the first chemical study on the leaves of Ocotea elegans and O. corymbosa as well as the first report of non-volatile compounds from Persea pyrifolia. (author)

  5. Extraction chemistry of some bidentate organophosphorus compounds

    Martella, L.L.; Navratil, J.D.; Santiago, W.F.

    1978-01-01

    The extraction chemistry of methylenediphosphonates, carbamoylphosphonates, and carbamoylmethylenephosphonates has been investigated. The bidentate organophosphorus compounds extract actinides strongly, extract lanthanides, iron, gallium, molybdenum, titanium, vanadium, and zirconium partially, and do not extract most other elements from 5 to 7 M nitric acid. The properties of the extractants and extraction mechanisms are discussed. The effect of complexing agents on the extraction of actinides and lanthanides is also presented.

  6. Decarboxylative and direct functionalisations of aromatic compounds

    Seo, Sangwon

    2014-01-01

    Aromatic rings are privileged structures found in a diverse range of natural and synthetic compounds, thus synthetic methods for their functionalisations are important in organic synthesis. Despite significant advancements made, especially in the field of transition metal catalysis, work still continues for the development of milder, more efficient, and more atom economical reactions. We describe here our efforts towards the development of decarboxylative/direct C(aryl)–N and C(aryl)–C bond f...

  7. NOVEL BIOACTIVE COMPOUNDS FROM MANGROVE DERIVED ACTINOMYCETES

    Kumari Amrita; Jain Nitin; Subathra Devi, C.

    2012-01-01

    Mangrove is most productive and unexplored ecosystem that approximately covers one fourth of world coastline with high diversity of thriving organism. Recently the rate of isolation of novel bioactive compounds from microorganism living in mangrove forest has tremendously increased which is reflected in significant hasten for exploration of mangrove actinomycetes. Actinomycetes are group of bacteria which are extremely interesting as active producers of many primary and secondary metabolites....

  8. Highly sophisticated compound droplets on fiber arrays

    Weyer, Floriane; Lismont, Marjorie; Dreesen, Laurent; Vandewalle, Nicolas

    2014-01-01

    The poster shows a drop of oil containing four soapy water droplets of four different colors : red, orange, green and blue. This sophisticated object is created thanks to a fiber array. Fiber networks allow processes such as droplet motion, fragmentation, trapping, releasing, mixing and encapsulation. Therefore, by using a vertical fiber decorated with successive nodes, compound droplets can be created. A soapy water droplet, with a specific color, is placed at each intersection. Then, a sili...

  9. Volatile compounds of functional dairy products

    Iličić Mirela D.; Milanović Spasenija D.; Carić Marijana Đ.; Kanurić Katarina G.; Vukić Vladimir R.; Hrnjez Dajana V.; Ranogajec Marjan I.

    2012-01-01

    Volatile compounds, affecting flavour of traditional and probiotic fresh cheese, were determined. Functional dairy product-fresh cheese was produced from milk of 2.5% fat content and milk of 4.2% fat content, under the semi-industrial conditions. The traditional starter culture Flora Danica (FD) and a combination of probiotic starter ABT-1 and FD (ABT-1:FD=1:1) were applied as starters. The volatile fractions were isolated by employing the combined simultaneous distillation-extraction t...

  10. Nanoencapsulation of bioactive compounds for food applications

    Sessa, Mariarenata

    2012-01-01

    2010 - 2011 The increase in dietary-intake-related illnesses, such as obesity, cardiovascular diseases, hypertension, diabetes and cancer, have made in recent years the development of health-and-wellness promoting foods a priority of the food industry. Clinical studies have demonstrated tangible health benefits that may be derived from the intake of bioactive compounds. However many difficulties are associated with their inclusion in food matrices, due to a very low solubility in water and...

  11. Applications of chiroptical spectroscopy to coordination compounds

    Wu, Tao; You, X. Z.; Bouř, Petr

    2015-01-01

    Roč. 284, SI (2015), s. 1-18. ISSN 0010-8545 R&D Projects: GA ČR GA13-03978S; GA ČR GAP208/11/0105 Grant ostatní: GA AV ČR(CZ) M200550902 Institutional support: RVO:61388963 Keywords : chirality * coordination compounds * chiroptical spectroscopy * new materials Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 12.239, year: 2014

  12. Semivolatile organic compounds in indoor environments

    Weschler, Charles J.; Nazaroff, W.W.

    2008-01-01

    Semivolatile organic compounds (SVOCs) are ubiquitous in indoor environments, redistributing from their original sources to all indoor surfaces. Exposures resulting from their indoor presence contribute to detectable body burdens of diverse SVOCs, including pesticides, plasticizers, and flame...... retardants. This paper critically examines equilibrium partitioning of SVOCs among indoor compartments. It proceeds to evaluate kinetic constraints on sorptive partitioning to organic matter on fixed surfaces and airborne particles. Analyses indicate that equilibrium partitioning is achieved faster for...

  13. Bioactive Compounds Found in Brazilian Cerrado Fruits

    Elisa Flávia Luiz Cardoso Bailão; Ivano Alessandro Devilla; Edemilson Cardoso da Conceição; Leonardo Luiz Borges

    2015-01-01

    Functional foods include any natural product that presents health-promoting effects, thereby reducing the risk of chronic diseases. Cerrado fruits are considered a source of bioactive substances, mainly phenolic compounds, making them important functional foods. Despite this, the losses of natural vegetation in the Cerrado are progressive. Hence, the knowledge propagation about the importance of the species found in Cerrado could contribute to the preservation of this biome. This review provi...

  14. Diffusion of phenolic compounds through polyethylene films

    M. Mendes; Touze Foltz, N.; Gardoni, M.; Mazéas, L.

    2014-01-01

    This paper presents experimental results of the diffusion of phenolic compounds through virgin and aged polyethylene (PE) films. The study considers five chlorophenols contaminants (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-tricholophenol, 2,3,5,6-tetrachlorophenol, and pentachlorophenol) that are known to be toxic even at very low concentrations. The concentration dynamics in the source and receptor chambers of the diffusion cells is interpreted using the numerical code Pollute. For virgin P...

  15. Variability of antinutritive compounds in flaxseed flours

    Roberto Russo; Remo Reggiani

    2013-01-01

    The use of flaxseed flours in the diets of poultry and broilers may be limited by the presence of antinutritive compounds. The content of cyanogenic glycosides, phytic acid, condensed tannins and trypsin inhibitors was evaluated in seven varieties of Linum usitatissimum. Phytic acid, condensed tannins and trypsin inhibitors showed significant differences among varieties. Only the concentration of cyanogenic glycosides and phytic acid in the flour deserves attention, while the content of conde...

  16. Characterization of A New Organic Photochromic Compound

    LIU,Guang-Fei; LIU,Lang; JIA,Dian-Zeng; HU,Xin; YU,Kai-Bei

    2004-01-01

    @@ A new organic photochromic compound, 1-phenyl-3-methyl-4-(4-fluoro)-benzal-5-pyrazolone ethanyl-thiosemicarbazone (PM4FBP-ETSC) was found to undergo photochromic reactions in the solid state. Upon irradiation with 365nm light the white powder sample turned light yellow. The photochromic properties were characterized by the time-dependent UV-vis reflective spectra. The structure of PM4FBP-ETSC was determined by single crystal X-ray diffraction.

  17. Copula Relations in Compound Poisson Processes

    Palmes, Christian

    2014-01-01

    We investigate in multidimensional compound Poisson processes (CPP) the relation between the dependence structure of the jump distribution and the dependence structure of the respective components of the CPP itself. For this purpose the asymptotic $\\lambda t\\to \\infty$ is considered, where $\\lambda$ denotes the intensity and $t$ the time point of the CPP. For modeling the dependence structures we are using the concept of copulas. We prove that the copula of a CPP converges under quite general...

  18. Emissions of volatile organic compounds from wood

    Granström, Karin

    2005-01-01

    The central aim of this thesis is to support the efforts to counteract certain environmental problems caused by emissions of volatile organic compounds. The purpose of this work was (1) to develop a method to establish the amount of emitted substances from dryers, (2) to determine the effect of drying medium temperature and end moisture content of the processed material on emissions of monoterpenes and other hydrocarbons, (3) to examine the emissions of monoterpenes during production of pelle...

  19. Elimination of Pt Organic Compounds from Groundwater

    Papežová, Barbora; Matějková, Martina; Kaštánek, František; Šolcová, Olga

    Maribor : IOS, Inštitut za okoljevarstvo in senzorje d.o.o, 2015 - (Lobnik, A.), PO1 ISBN 978-961-92863-3-3. [International Conference on Nanomaterials & Applications (NANOAPP 2015) /2./. Maribor (SI), 23.06.2015-26.06.2015] R&D Projects: GA TA ČR TA04020700 Institutional support: RVO:67985858 Keywords : organic compounds * groundwater * decontamination techniques Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  20. The Q, Compound Q is Finally Deciphered

    Bhagi-Damodaran, Ambika; Lu, Yi

    2015-01-01

    Methane monooxygenases (MMOs) activate the high energy C-H bond of methane and convert it to methanol with high selectivity and under physiological conditions. Despite decades of efforts focusing on elucidating the structure, function and mechanism of soluble MMOs, the structure of a key intermediate (called compound Q) remained unknown. This article highlights a recent report by Banerjee et. al. which not only firmly establishes the core-structure of Q, but also provides significant insight ...

  1. Enediyne compounds - new promises in anticancer therapy.

    Gredicak, Matija; Jerić, Ivanka

    2007-06-01

    Scientists of all kinds have long been intrigued by the nature, action and potential of natural toxins that possess exceptional antibacterial and anticancer activities. These compounds, named enediynes, are among the most effective chemotherapeutic agents known. Often compared with intelligent weapons, due to the unique structure and sophisticated mechanism by which they destroy double-helical DNA, enediyne antibiotics are nowadays the most promising leaders in the anticancer therapy. Apart from their diversity, enediyne compounds share some structural and functional similarities. One fragment of a structure is responsible for the recognition and transport, another part acts as molecular trigger while the third, reactive enediyne unit, undergoes Bergman cycloaromatization and causes DNA breakage. Members of the enediyne family are already in clinical use to treat various cancers, but more general use is limited by their complex structure, which makes them formidable targets for synthetic chemists. There are three main approaches in the design of new enediyne-related compounds: improvement of enediyne >warheadsenediynes, their mode of action and efforts undertaken to design artificial enediyne-related DNA cleaving agents. PMID:17507311

  2. Activity of Polyphenolic Compounds against Candida glabrata

    Ricardo Salazar-Aranda

    2015-09-01

    Full Text Available Opportunistic mycoses increase the morbidity and mortality of immuno-compromised patients. Five Candida species have been shown to be responsible for 97% of worldwide cases of invasive candidiasis. Resistance of C. glabrata and C. krusei to azoles has been reported, and new, improved antifungal agents are needed. The current study was designed to evaluatethe activity of various polyphenolic compounds against Candida species. Antifungal activity was evaluated following the M27-A3 protocol of the Clinical and Laboratory Standards Institute, and antioxidant activity was determined using the DPPH assay. Myricetin and baicalein inhibited the growth of all species tested. This effect was strongest against C. glabrata, for which the minimum inhibitory concentration (MIC value was lower than that of fluconazole. The MIC values against C. glabrata for myricitrin, luteolin, quercetin, 3-hydroxyflavone, and fisetin were similar to that of fluconazole. The antioxidant activity of all compounds was confirmed, and polyphenolic compounds with antioxidant activity had the greatest activity against C. glabrata. The structure and position of their hydroxyl groups appear to influence their activity against C. glabrata.

  3. Natural Biodegradation of Phenolic Compounds in Groundwater

    2000-01-01

    A combination of field data and theoretical approaches is used to assess the natural attenuation and status of a complex plume of phenolic compounds (phenol, cresols, xylenols) in a deep, consolidated, UK Permo-Triassic sandstone aquifer. Biodegradation of the phenolic compounds at concentrations up to 12500mg·L-1 is occurring under aerobic, NO-3-reducing, Mn/Fe-reducing, SO2-4-reducing and methanogenic conditions in the aquifer, with the accumulation of inorganic and organic metabolites in the plume. An electron and carbon balance for the plume suggests that only 6% of the source term has been degraded in 50 years. The residual contaminant mass in the plume significantly exceeds estimates of electron acceptor inputs, indicating that the plume will grow. Two detailed vertical profiles through the plume show that contaminant distributions are controlled more by source history than by biodegradation processes. Microbiological and mass balance studies show that biodegradation is greatest at the plume fringe where contaminant concentrations are diluted by transverse mixing. Active bacterial populations exist throughout the plume but biodegradation is inhibited in the plume core by high contaminant concentrations. Stable isotope studies show that SO2-4-reduction is particularly sensitive to contaminant concentration. The aquifer is not oxidant-deficient but natural attenuation of the phenolic compounds in this system is limited by toxicity from the pollutant load and the bioavailability of electron acceptors. Natural attenuation of these contaminants will increase only after increased dilution of the plume.

  4. Barocaloric effect in rare earth compounds

    Antunes de Oliveira, Nilson

    2014-03-01

    The magnetic barocaloric effect, which is characterized by the isothermal entropy change and adiabatic temperature change upon pressure variation can be a very useful to improve the performance of magnetic refrigerator. In this work, we discuss the barocaloric effect in rare earth compounds. To this end we use a model of interacting localized magnetic moments. In the first part of the work we make a systematic analysis in terms of the model parameters, considering the simplest case whose angular momentum is 1/2. Our calculations show that the behavior of the barocaloric quantities can be normal, inverse or anomalous. In the second part of the work, we apply the model to describe the barocaloric effect in the compounds RCo2, Gd5Si2Ge2 and Tb5Si2Ge2. Our theoretical calculations for Gd5Si2Ge2 is in a reasonable agreement with the available experimental data. Our calculations for the other compounds, need experimental data to be confirmed. CNPq, FAPERJ

  5. Photofunctional ruthenium sulfoxide compounds for molecular photonics

    Ruthenium polypyridine sulfoxide compounds are promising photofunctional molecules, which comply with the key requirements of (ultra-)fast all-optical devices, e.g. in information and telecommunication industry. These small molecular compounds provide a fast phototriggered linkage isomerization located at the SO ligand into two structural metastable states. The isomerization is accompanied by a pronounced photochromism with a tremendous photosensitivity. An advantage of these compounds is their adaptability on the optical requirements (e.g. spectral sensitivity) by two possibilities: Substitution of ligands or modification of the (dielectric) environment of the complex. We highlight the optical properties of these sulfoxides in the view of material design for the field of nonlinear molecular photonics: This includes the possibility of tailoring the optical properties studied by linear and nonlinear optical spectroscopy. Dynamical control of light by optical recording of 2D-photonic structures is verified by a spatially modulated phototriggered linkage isomerism using a single-pulse two-beam interferometer. Our findings are discussed in the frame of pronounced photochromism and presence of refractive index changes accompanying the phototriggered isomerism. The latter is explained satisfactorily both by Kramers-Kronig-relation as well as Lorentz-Lorenz relation.

  6. Transitions between compound states of spherical nuclei

    Wigner's statistical matrices are used to study the average reduced g widths and their dispersion for g transitions from a compound state c to another state f, with a lower excitation energy but of arbitrary complexity, for spherical nuclei. It is found that the Porter--Thomas distribution holds for the g widths for all cases of practical interest. In g transitions between compound states c and c' with E/sub g/< or =2 MeV, the most important transitions are M1 transitions involving the major many-quasiparticle components of state c and E1 transitions involving the minor components of state c. It is shown that the strength functions predicted by the various theories for M1 and E1 transitions between compound states with E/sub g/< or =2 MeV are similar. Preference is assigned to the M1-transition version because of experimental results on (n,ga) reactions with thermal and resonance neutrons

  7. Unstable magnetic moments in Ce compounds

    The problems which are connected with the appearance or disappearance of local moments in metals are well reflected in the magnetic behaviour of Ce intermetallic compounds. This work describes experiments on two Ce compounds which are typical examples of unstable moment systems. The first of these is CeAl2 which at low temperatures, shows coexistence of antiferromagnetic order and the Kondo effect. Measurements are presented of the magnetization and the susceptibility in different magnetic field and temperature regions. An analysis of these measurements, using a model for the crystal field effects, shows the agreement between the measurements and the calculations to be reasonably good for CeAl2, but this agreement becomes worse upon decreasing Ce concentration. A phenomenological description of the observations is given. The second compound reported on is CeCu2Si2, the first 'heavy-fermion' superconductor to be investigated. The superconducting state is possibly formed by the quasi-particles of a non-magnetic many body singlet state, and not simply by the (sd) conduction electrons. This being a novel phenomenon, a number of experiments were performed to test this picture and to obtain a detailed description of the behaviour of CeCu2Si2. Measurements of the Meissner volume, confirmed the superconductivity to be intrinsic. (Auth.)

  8. Organic compounds trapped in aqueous fluid inclusions

    Ruble, T.E.D.; George, S.C.; Lisk, M.; Quezada, R.A. [CSIRO Div. of Petroleum Resources, North Ryde (Australia)

    1998-12-31

    Fluid inclusion samples from several Australian oil wells have been analysed to document the prevalence and composition of volatile hydrocarbons contained within aqueous inclusions. These results clearly establish that trapped palaeo formation waters can be a source of such compounds, which are frequently predominant in samples with a low content of oil-bearing inclusions. The apparent ``anomalous`` hydrocarbons distributions derived from aqueous inclusions contain abundant water-soluble compounds, such as benzene and toluene, which may originate from interaction of formation waters with subsurface petroleum accumulations. Aqueous inclusions are also often enriched in alkenes and oxygenated species, such as furans, which are minor constituents of petroleum but could form via secondary processes such as anoxic microbial degradation in formation waters. The co-occurrence of aqueous-derived organic compounds within samples containing oil inclusions suggest the need for caution when interpreting volatile hydrocarbon distributions. However, the presence of these components in samples from dry wells could be used as a tool to substantiate the proximity of a petroleum accumulation in an area which would otherwise be considered to have low prospectivity. (author)

  9. Photofunctional ruthenium sulfoxide compounds for molecular photonics

    Dieckmann, Volker; Eicke, Sebastian; Springfeld, Kristin; Imlau, Mirco [Department of Physics, University of Osnabrueck, Barbarastr. 7, D-49069 Osnabrueck (Germany)

    2011-07-01

    Ruthenium polypyridine sulfoxide compounds are promising photofunctional molecules, which comply with the key requirements of (ultra-)fast all-optical devices, e.g. in information and telecommunication industry. These small molecular compounds provide a fast phototriggered linkage isomerization located at the SO ligand into two structural metastable states. The isomerization is accompanied by a pronounced photochromism with a tremendous photosensitivity. An advantage of these compounds is their adaptability on the optical requirements (e.g. spectral sensitivity) by two possibilities: Substitution of ligands or modification of the (dielectric) environment of the complex. We highlight the optical properties of these sulfoxides in the view of material design for the field of nonlinear molecular photonics: This includes the possibility of tailoring the optical properties studied by linear and nonlinear optical spectroscopy. Dynamical control of light by optical recording of 2D-photonic structures is verified by a spatially modulated phototriggered linkage isomerism using a single-pulse two-beam interferometer. Our findings are discussed in the frame of pronounced photochromism and presence of refractive index changes accompanying the phototriggered isomerism. The latter is explained satisfactorily both by Kramers-Kronig-relation as well as Lorentz-Lorenz relation.

  10. Volatile compounds of functional dairy products

    Iličić Mirela D.

    2012-01-01

    Full Text Available Volatile compounds, affecting flavour of traditional and probiotic fresh cheese, were determined. Functional dairy product-fresh cheese was produced from milk of 2.5% fat content and milk of 4.2% fat content, under the semi-industrial conditions. The traditional starter culture Flora Danica (FD and a combination of probiotic starter ABT-1 and FD (ABT-1:FD=1:1 were applied as starters. The volatile fractions were isolated by employing the combined simultaneous distillation-extraction technique (SDE. The compounds were identified by gas chromatography - mass spectrometry (GC-MS and quantified by using standard procedure. Following 19 compounds have been identified: 8 hydrocarbons (decane, undecane, tridecane, tetradecane, pentadecane, hexadecane, octadecane and 2, 6, 10, 14-tetramethyl hexadecane; 6 ketones (2-heptanone, 2-nonanone, 2- undecanone, 2-pentadecanone, 2-heptadecanone and 2-tridecanone; 3 aldehydes (nonanal, tetradecanal and hexadecanal; 1 fatty acid (decanoic acid and disulfide, bis (1-methylethyl. The highest levels were associated with hexadecanal, 2-pentadecanone, 2-tridecanone, and 2-undecanone in all examined samples, regardless to the starter culture and type of milk used. [Projekat Ministarstva nauke Republike Srbije, br. 46009

  11. Antioxidative compounds from Garcinia buchananii stem bark.

    Stark, Timo D; Salger, Mathias; Frank, Oliver; Balemba, Onesmo B; Wakamatsu, Junichiro; Hofmann, Thomas

    2015-02-27

    An aqueous ethanolic extract of the stem bark of Garcinia buchananii showed strong antioxidative activity using H2O2 scavenging, oxygen radical absorbance capacity (ORAC), and Trolox equivalent antioxidant capacity (TEAC) assays. Activity-guided fractionation afforded three new compounds, isomanniflavanone (1), an ent-eriodictyol-(3α→6)-dihydroquercetin-linked biflavanone, 1,5-dimethoxyajacareubin (2), and the depsidone garcinisidone-G (3), and six known compounds, (2″R,3″R)-preussianon, euxanthone, 2-isoprenyl-1,3,5,6-tetrahydroxyxanthone, jacareubin, isogarcinol, and garcinol. All compounds were described for the first time in Garcinia buchananii. The absolute configurations were determined by a combination of NMR, ECD spectroscopy, and polarimetry. These natural products showed high in vitro antioxidative power, especially isomanniflavanone, with an EC50 value of 8.5 μM (H2O2 scavenging), 3.50/4.95 mmol TE/mmol (H/L-TEAC), and 7.54/14.56 mmol TE/mmol (H/L-ORAC). PMID:25625705

  12. Modulation of leptin resistance by food compounds.

    Aragonès, Gerard; Ardid-Ruiz, Andrea; Ibars, Maria; Suárez, Manuel; Bladé, Cinta

    2016-08-01

    Leptin is mainly secreted by white adipose tissue and regulates energy homeostasis by inhibiting food intake and stimulating energy expenditure through its action in neuronal circuits in the brain, particularly in the hypothalamus. However, hyperleptinemia coexists with the loss of responsiveness to leptin in common obese conditions. This phenomenon has been defined as leptin resistance and the restoration of leptin sensitivity is considered to be a useful strategy to treat obesity. This review summarizes the existing literature on potentially valuable nutrients and food components to reverse leptin resistance. Notably, several food compounds, such as teasaponins, resveratrol, celastrol, caffeine, and taurine among others, are able to restore the leptin signaling in neurons by overexpressing anorexigenic peptides (proopiomelanocortin) and/or repressing orexigenic peptides (neuropeptide Y/agouti-related peptide), thus decreasing food intake. Additionally, some nutrients, such as vitamins A and D, can improve leptin transport through the blood-brain barrier. Therefore, food components can improve leptin resistance by acting at different levels of the leptin pathway; moreover, some compounds are able to target more than one feature of leptin resistance. However, systematic studies are necessary to define the actual effectiveness of each compound. PMID:26842874

  13. Heavy metal screening in compounds feeds

    Tomas Toth

    2015-05-01

    Full Text Available Heavy metals are generally classified as basic groups of pollutants that are now a days found in different environmental compartments. This is quite a large group of contaminants, which have different characteristics, effects on the environment and sources of origin. For environment pose the greatest risks, especially heavy metals produced by anthropogenic activities that adversely affect the health and vitality of organisms and natural environmental conditions. Livestock nutrition is among the main factors which affect not only the deficiency of livestock production and quality of food of animal origin, but they are also a factor affecting the safety and wholesomeness and the animal health. Compound feeds is characterized as a mixture of two or more feed grain. Containing organic, inorganic nutrients and specifically active compound feed meet the nutritional requirements of a given kind and age category of animals. They are used mainly in the diet of pigs, poultry, but also the nutrition of cattle, sheep, horses and other animal categories. The basic ingredients are cereals in proportion of 60-70 %. The aim of this thesis was to analyze the content of hazardous elements (copper, zinc, iron, manganese, cobalt, nickel, chromium, lead, cadmium, mercury in 15 samples of compound feeds and then evaluating their content in comparison with maximum limits laid down by Regulation of the Government of the Slovak Republic and Regulation Commission (EC.

  14. Lattice anisotropy in uranium ternary compounds: UTX

    Highlights: ► Compressibility and thermal expansion of several U-based compounds were established. ► The direction of the U–U bonds is the “soft” crystallographic direction. ► Highest coefficient of linear thermal expansion is in the direction of the U–U bonds. ► The closer the U atoms are together the better they can be compressed together. - Abstract: Several U-based intermetallic compounds (UCoGe, UNiGe with the TiNiSi structure type and UNiAl with the ZrNiAl structure type) and their hydrides were studied from the point of view of compressibility and thermal expansion. Confronted with existing data for the compounds with the ZrNiAl structure type a common pattern emerges. The direction of the U–U bonds with participation of the 5f states is distinctly the “soft” crystallographic direction, exhibiting also the highest coefficient of linear thermal expansion. The finding leads to an apparent paradox: the closer the U atoms are together in a particular direction the better they can be additionally compressed together by applied hydrostatic pressure.

  15. Processing compound words: Evidence from synaesthesia.

    Mankin, Jennifer L; Thompson, Christopher; Branigan, Holly P; Simner, Julia

    2016-05-01

    This study used grapheme-colour synaesthesia, a neurological condition where letters evoke a strong and consistent impression of colour, as a tool to investigate normal language processing. For two sets of compound words varying by lexical frequency (e.g., football vs lifevest) or semantic transparency (e.g., flagpole vs magpie), we asked 19 grapheme-colour synaesthetes to choose their dominant synaesthetic colour using an online colour palette. Synaesthetes could then select a second synaesthetic colour for each word if they experienced one. For each word, we measured the number of elicited synaesthetic colours (zero, one, or two) and the nature of those colours (in terms of their saturation and luminance values). In the first analysis, we found that the number of colours was significantly influenced by compound frequency, such that the probability of a one-colour response increased with frequency. However, semantic transparency did not influence the number of synaesthetic colours. In the second analysis, we found that the luminance of the dominant colour was predicted by the frequency of the first constituent (e.g. rain in rainbow). We also found that the dominant colour was significantly more luminant than the secondary colour. Our results show the influence of implicit linguistic measures on synaesthetic colours, and support multiple/dual-route models of compound processing. PMID:26848730

  16. Chlorinated organic compounds in urban river sediments

    Soma, Y.; Shiraishi, H.; Inaba, K. [National Inst. of Environmental Studies, Tsukuba, Ibaraki (Japan)

    1995-12-31

    Among anthropogenic chemicals, many chlorinated organic compounds have been used as insecticides and detected frequently as contaminants in urban river sediments so far. However, the number and total amount of chemicals produced commercially and used are increasing year by year, though each amount of chemicals is not so high. New types of contaminants in the environment may be detected by the use of newly developed chemicals. Chlorinated organic compounds in the urban river sediments around Tokyo and Kyoto, large cities in Japan, were surveyed and recent trends of contaminants were studied. Contaminants of the river sediments in industrial areas had a variety, but PCB (polychlorinated biphenyls) was detected in common in industrial areas. Concentration of PCB related well to the number of factories on both sides of rivers, although the use of PCB was stopped 20 years ago. In domestic areas, Triclosan (5-chloro-2-(2,4-dichlorophenoxy)-phenol) and Triclocarban (3,4,4{prime}-trichlorocarbanilide)(both are contained in soap or shampoo for fungicides), p-dichlorobenzene (insecticides for wears) and TCEP(tris-chloroethyl phosphate) were detected. EOX(extracted organic halogen) in the sediments was 5 to 10 times of chlorinated organic compounds detected by GC/MS. Major part of organic halogen was suggested to be included in chlorinated organics formed by bleaching or sterilization.

  17. Steroidal Compounds in Commercial Parenteral Lipid Emulsions

    Rafat A. Siddiqui

    2012-08-01

    Full Text Available Parenteral nutrition lipid emulsions made from various plant oils contain steroidal compounds, called phytosterols. During parenteral administration of lipid emulsions, phytosterols can reach levels in the blood that are many fold higher than during enteral administration. The elevated phytosterol levels have been associated with the development of liver dysfunction and the rare development of liver failure. There is limited information available in the literature related to phytosterol concentrations in lipid emulsions. The objective of the current study was to validate an assay for steroidal compounds found in lipid emulsions and to compare their concentrations in the most commonly used parenteral nutrition lipid emulsions: Liposyn® II, Liposyn® III, Lipofundin® MCT, Lipofundin® N, Structolipid®, Intralipid®, Ivelip® and ClinOleic®. Our data demonstrates that concentrations of the various steroidal compounds varied greatly between the eight lipid emulsions, with the olive oil-based lipid emulsion containing the lowest levels of phytosterols and cholesterol, and the highest concentration of squalene. The clinical impression of greater incidences of liver dysfunction with soybean versus MCT/LCT and olive/soy lipid emulsions may be reflective of the levels of phytosterols in these emulsions. This information may help guide future studies and clinical care of patients with lipid emulsion-associated liver dysfunction.

  18. Synthesis of bioreductive esters from fungal compounds.

    Weerapreeyakul, Natthida; Anorach, Rutchayaporn; Khuansawad, Thidarut; Yenjai, Chavi; Isaka, Masahiko

    2007-06-01

    Four new bioreductive esters (7-10) have been synthesized. Their structures composed of trimethyl lock containing quinone propionic acid with an ester linkage to the fungal cytotoxic compounds; preussomerin G (1), preussomerin I (2), phaseolinone (3) and phomenone (4). The synthesized esters are aimed to act via reductive activation specifically at the cancer cells, resulting from hypoxia and overexpression of reductases. Hence, the toxicity will be lessened during distribution across the normal cells. The anticancer activity was determined in cancer cell lines with reported reductase i.e., BC-1 cells and NCI-H187 as well as in non-reductase containing cancer cells; KB cells. When considering each cell lines, result showed that structure modification giving to 7-10 led to less cytotoxicity than their parent compounds (1-4). Both 7 and 8 were strongly cytotoxic (IC50 < or = 5 microg/ml) to NCI-H187, whereas 9 and 10 were moderately cytotoxic (IC50 = 6-10 microg/ml) to BC-1 cells. Additional study of stability of represented phenolic ester (8) and an alcoholic ester (9) were performed. Result illustrated that both 8 and 9 were stable in the presence of esterase. Therefore, the cytotoxicity of the synthesized compounds (8-10) might be due to partial bioreductive activation in the cancer cells. PMID:17541198

  19. Antitumor activity of chemical modified natural compounds

    Marilda Meirelles de Oliveira

    1991-01-01

    Full Text Available Search of new activity substances starting from chemotherapeutic agents, continously appears in international literature. Perhaps this search has been done more frequently in the field of anti-tumor chemotherapy on account of the unsuccess in saving advanced stage patients. The new point in this matter during the last decade was computer aid in planning more rational drugs. In near future "the accessibility of supercomputers and emergence of computer net systems, willopen new avenues to rational drug design" (Portoghese, P. S. J. Med. Chem. 1989, 32, 1. Unknown pharmacological active compounds synthetized by plants can be found even without this eletronic devices, as tradicional medicine has pointed out in many contries, and give rise to a new drug. These compounds used as found in nature or after chemical modifications have produced successful experimental medicaments as FAA, "flavone acetic acid" with good results as inibitors of slow growing animal tumors currently in preclinical evaluation for human treatment. In this lecture some international contributions in the field of chemical modified compounds as antineoplasic drugs will be examined, particularly those done by Brazilian researches.

  20. of polyphenolic compounds in Ilex Sp.

    Zwyrzykowska Anna

    2015-11-01

    Full Text Available Natural compounds are an important source of desired biological activity which help to improve nutritional status, enhance productivity and bring many health benefits. The leaves of the Ilex paraguariensis (Aquifoliaceae are used for preparing a beverage known as yerba mate and represent a proven source of natural polyphenols which are known to foster biological activity with the emphasis on antioxidant properties. In present work we focused on the polyphenolic content of air-dried leaves of Ilex aquifolium L., Ilex aquifolium ‘Argentea Mariginata’, Ilex meserveae ‘Blue Angel’, and a commercially available mate as the reference product. Liquid chromatography combined with mass spectrometry (HPLC and LC-MS and thin layer chromatography (TLC, were used to establish polyphenolic substances content in aqueous methanolic extracts obtained from the biological matter. Up to 20 polyphenolic compounds were identified in the extracts, including rutin, quinic acid and its caffeoyl esters, i.e. chlorogenic acid and its isomers as well as dicaffeoyl derivatives. We took chlorogenic acid and rutin as reference compounds to quantify their levels in the extracts. It was determined that in all tested plants, high levels of these antioxidants were present. This led us to the conclusion that their leaves might serve as valuable food additives.

  1. Aldose reductase inhibitory compounds from Xanthium strumarium.

    Yoon, Ha Na; Lee, Min Young; Kim, Jin-Kyu; Suh, Hong-Won; Lim, Soon Sung

    2013-09-01

    As part of our ongoing search for natural sources of therapeutic and preventive agents for diabetic complications, we evaluated the inhibitory effects of components of the fruit of Xanthium strumarium (X. strumarium) on aldose reductase (AR) and galactitol formation in rat lenses with high levels of glucose. To identify the bioactive components of X. strumarium, 7 caffeoylquinic acids and 3 phenolic compounds were isolated and their chemical structures were elucidated on the basis of spectroscopic evidence and comparison with published data. The abilities of 10 X. strumarium-derived components to counteract diabetic complications were investigated by means of inhibitory assays with rat lens AR (rAR) and recombinant human AR (rhAR). From the 10 isolated compounds, methyl-3,5-di-O-caffeoylquinate showed the most potent inhibition, with IC₅₀ values of 0.30 and 0.67 μM for rAR and rhAR, respectively. In the kinetic analyses using Lineweaver-Burk plots of 1/velocity and 1/substrate, methyl-3,5-di-O-caffeoylquinate showed competitive inhibition of rhAR. Furthermore, methyl-3,5-di-O-caffeoylquinate inhibited galactitol formation in the rat lens and in erythrocytes incubated with a high concentration of glucose, indicating that this compound may be effective in preventing diabetic complications. PMID:23604720

  2. Applying Quality by Design Concepts to Pharmacy Compounding.

    Timko, Robert J

    2015-01-01

    Compounding of medications is an important part of the practice of the pharmacy profession. Because compounded medications do not have U.S. Food and Drug Administration approval, a pharmacist has the responsibility to ensure that compounded medications are of suitable quality, safety, and efficacy. The Federal Government and numerous states have updated their laws and regulations regarding pharmacy compounding as a result of recent quality issues. Compounding pharmacists are expected to follow good preparation prodecures in their compounding practices in much the same way pharmaceutical manufacturers are required to follow Current Good Manufacturing Procedures as detailed in the United States Code of Federal Regulations. Application of Quality by Design concepts to the preparation process for a compounded medication can help in understanding the potential pitfalls and the means to mitigate their impact. The goal is to build quality into the compounding process to ensure that the resultant compounded prescription meets the human or animal patients' requirements. PMID:26891559

  3. Biogenic volatile organic compounds - small is beautiful

    Owen, S. M.; Asensio, D.; Li, Q.; Penuelas, J.

    2012-12-01

    While canopy and regional scale flux measurements of biogenic volatile organic compounds (bVOCs) are essential to obtain an integrated picture of total compound reaching the atmosphere, many fascinating and important emission details are waiting to be discovered at smaller scales, in different ecological and functional compartments. We concentrate on bVOCs below ground to pollination of flowers. Although bVOC emissions from soil surfaces are small, bVOCs are exuded by roots of some plant species, and can be extracted from decaying litter. Naturally occurring monoterpenes in the rhizosphere provide a specialised carbon source for micro-organisms, helping to define the micro-organism community structure, and impacting on nutrient cycles which are partly controlled by microorganisms. Naturally occurring monoterpenes in the soil system could also affect the aboveground structure of ecosystems because of their role in plant defence strategies and as mediating chemicals in allelopathy. A gradient of monoterpene concentration was found in soil around Pinus sylvestris and Pinus halepensis, decreasing with distance from the tree. Some compounds (α-pinene, sabinene, humulene and caryophyllene) in mineral soil were linearly correlated with the total amount of each compound in the overlying litter, indicating that litter might be the dominant source of these compounds. However, α-pinene did not fall within the correlation, indicating a source other than litter, probably root exudates. We also show that rhizosphere bVOCs can be a carbon source for soil microbes. In a horizontal gradient from Populus tremula trees, microbes closest to the tree trunk were better enzymatically equipped to metabolise labeled monoterpene substrate. Monoterpenes can also increase the degradation rate in soil of the persistant organic pollutants, likely acting as analogues for the cometabo-lism of polychlorinated biphenyls (PCBs) Flowers of a ginger species (Alpinia kwangsiensis) and a fig species

  4. Interstellar fullerene compounds and diffuse interstellar bands

    Omont, Alain

    2016-05-01

    Recently, the presence of fullerenes in the interstellar medium (ISM) has been confirmed and new findings suggest that these fullerenes may possibly form from polycyclic aromatic hydrocarbons (PAHs) in the ISM. Moreover, the first confirmed identification of two strong diffuse interstellar bands (DIBs) with the fullerene, C60+, connects the long standing suggestion that various fullerenes could be DIB carriers. These new discoveries justify reassessing the overall importance of interstellar fullerene compounds, including fullerenes of various sizes with endohedral or exohedral inclusions and heterofullerenes (EEHFs). The phenomenology of fullerene compounds is complex. In addition to fullerene formation in grain shattering, fullerene formation from fully dehydrogenated PAHs in diffuse interstellar clouds could perhaps transform a significant percentage of the tail of low-mass PAH distribution into fullerenes including EEHFs. But many uncertain processes make it extremely difficult to assess their expected abundance, composition and size distribution, except for the substantial abundance measured for C60+. EEHFs share many properties with pure fullerenes, such as C60, as regards stability, formation/destruction and chemical processes, as well as many basic spectral features. Because DIBs are ubiquitous in all lines of sight in the ISM, we address several questions about the interstellar importance of various EEHFs, especially as possible carriers of diffuse interstellar bands. Specifically, we discuss basic interstellar properties and the likely contributions of fullerenes of various sizes and their charged counterparts such as C60+, and then in turn: 1) metallofullerenes; 2) heterofullerenes; 3) fulleranes; 4) fullerene-PAH compounds; 5) H2@C60. From this reassessment of the literature and from combining it with known DIB line identifications, we conclude that the general landscape of interstellar fullerene compounds is probably much richer than heretofore realized

  5. An introduction to the chemistry of complex compounds

    Grinberg, Aleksander Abramovich; Trimble, R F

    1962-01-01

    An Introduction to the Chemistry of Complex Compounds discusses the fundamental concepts that are essential in understanding the underlying principles of complex compounds. The coverage of the book includes the compounds of the hexa, penta, and tetrammine type; compounds of the tri, dl, monoamine and hexacido types for the coordination number of 6; and complex compounds with a coordination number of 4. The text also covers the effects and chemical properties of complex compounds, such as the nature of the force of complex formation; the mutual effects of coordinated groups; and acid-base prope

  6. Chemical compounds isolated from Talinum triangulare (Portulacaceae).

    de Oliveira Amorim, Ana Paula; de Carvalho, Almir Ribeiro; Lopes, Norberto Peporine; Castro, Rosane Nora; de Oliveira, Marcia Cristina Campos; de Carvalho, Mário Geraldo

    2014-10-01

    This first phytochemical study of Talinum triangulare Leach (Portulacaceae), also known as 'cariru', which is a commonly consumed food in Northern Brazil, allowed the isolation and structural determination of four new compounds: one acrylamide, 3-N-(acryloyl, N-pentadecanoyl) propanoic acid (5), and three new phaeophytins named (15(1)S, 17R, 18R)-Ficuschlorin D acid (3(1),3(2)-didehydro-7-oxo-17(3)-O-phytyl-rhodochlorin-15-acetic acid), (13), Talichorin A (17R, 18R)-phaeophytin b-15(1)-hidroxy, 15(2),15(3)-acetyl-13(1)-carboxilic acid (14), and (15(1)S, 17R, 18R)-phaeophytin b peroxylactone or (15(1)S, 17R, 18R)-hydroperoxy-ficuschlorin D (16), together with twelve known compounds, including four phaeophytins (11,12, 15 and 17). The structures of the compounds were established on the basis of 1D and 2D NMR, IR, HRESI-MS spectra, including GC-MS, and HPLC-UV analysis, as well as comparisons with the literature data. The CD spectra data analysis were used to define the absolute configuration of phaeophytins 12 (13(2)R, 17R, 18R)-13(2)-hydroxyphaeophytin a, 13 and 16, 15 (15(1)S, 17R, 18R)-3(1),3(2)-didehydro-15(1)-hydroxyrhodochlorin-15-acetic acid δ-lactone-15(2)-methyl-17(3)-phytyl ester and 17 (17R, 18R)-purpurin 18-phytyl ester. PMID:24799228

  7. The Atmospheric Fate of Organic Nitrogen Compounds

    Borduas, Nadine

    Organic nitrogen compounds are present in our atmosphere from biogenic and anthropogenic sources and have impacts on air quality and climate. Due to recent advances in instrumentation, these compounds are being detected in the gas and particle phases, raising questions as to their source, processing and sinks in the environment. With their recently identified role as contributors to aerosol formation and growth, their novel large scale use as solvents in carbon capture and storage (CCS) technology and their emissions from cigarette smoke, it is now important to address the gaps in our understanding of the fate of organic nitrogen. Experimentally and theoretically, I studied the chemical atmospheric fate of specific organic nitrogen compounds in the amine, amide and isocyanate families, yielding information that can be used in chemical transport models to assess the fate of this emerging class of atmospheric molecules. I performed kinetic laboratory studies in a smog chamber to measure the room temperature rate coefficient for reaction with the hydroxyl radical of monoethanolamine, nicotine, and five different amides. I employed online-mass spectrometry techniques to quantify the oxidation products. I found that amines react quickly with OH radicals with lifetimes of a few hours under sunlit conditions, producing amides as oxidation products. My studies on amides revealed that they have much longer lifetimes in the atmosphere, ranging from a few hours to a week. Photo-oxidation of amides produces isocyanates and I investigated these mechanisms in detail using ab initio calculations. Furthermore, I experimentally measured isocyanic acid's Henry's Law constant as well as its hydrolysis rate constants to better understand its sinks in the atmosphere. Finally, I re-examined the structure-activity relationship (SAR) of organic nitrogen molecules for improved model parameterizations.

  8. Compound Semiconductor Nano structures for Optoelectronic Applications

    Compound semiconductors belong to an important class of semiconductors which have direct band gaps and are exploited in optoelectronic applications for efficient emission of optical radiation ranging in wavelengths from the infrared to the ultraviolet. They are principally classified into Gp II-Vs such as GaN, GaAs and InP and Gp II-VIs such as ZnO, CdS and CdTe. Besides being used as light emitters, some compound semiconductors have large carrier mobility and high breakdown voltage compared to Si, the mainstay of the integrated circuit industry. They are now being considered for high power and very high speed electronic devices. Device performance for optoelectronic applications are measured in terms of internal and external quantum efficiency. These are related to materials quality and light extraction efficiency. Defects are generally generated because of lattice mismatch between the device epitaxial layers and the substrate. Ways have to be found to reduce the stress or through compensation by introducing intermediate layers. The wide range of band gaps available is utilized in heterojunctions to create potential barriers for confining charge carriers such as in quantum wells and quantum dots that result in more efficient radiative recombination. For solid-state lighting application, the quality of lighting is measured by an additional parameter known the color rendering index. In all the above-mentioned considerations, nano structures have been used to provide solutions to enhance the performance parameters of the optical devices. In this presentation, some examples of applications of nano structures are described together with their motivations, fabrication techniques and the results. Two compound semiconductors, GaN for Gp III-V and ZnO for Gp II-VI, are used for the fabrication of the nano structures. (author)

  9. Microbial degradation of furanic compounds: biochemistry, genetics, and impact

    Wierckx, N.; Koopman, F.; Ruijssenaars, H.J.; De Winde. J.H.

    2011-01-01

    Microbial metabolism of furanic compounds, especially furfural and 5-hydroxymethylfurfural (HMF), is rapidly gaining interest in the scientific community. This interest can largely be attributed to the occurrence of toxic furanic aldehydes in lignocellulosic hydrolysates. However, these compounds ar

  10. Composition and method for stabilizing radiolabelled compounds using thiocarbonylated diethylenetriamines

    Radiolabelled compounds, such as amino acids, nucleosides, vitamins and drugs, are stabilised against radiolytic decomposition by adding a solution of a thiocarbonylated diethylenetriamine to a solution of the radiolabelled compound. (author)

  11. Compound chondrule formation via collision of supercooled droplets

    Arakawa, Sota

    2016-01-01

    We present a novel model showing that compound chondrules are formed by collisions of supercooled droplets. This model reproduces two prominent observed features of compound chondrules: the nonporphyritic texture and the size ratio between two components.

  12. Neoclassical compounds and final combining forms in English

    Ana Díaz-Negrillo

    2014-12-01

    Full Text Available English neoclassical compounds rely on a distinct vocabulary stock and present morphological features which raise a number of theoretical questions. Generalisations about neoclassical compounds are also problematic because the output is by no means homogeneous, that is, defining features of neoclassical compounds sometimes co-exist with features that are not prototypical of these formations. The paper looks at neoclassical compounds with a view to exploring patterns of morphological behaviour and development in this class of compounds. The approach is both synchronic and diachronic: it researches whether the morphological behaviour of recently formed compounds is different from that of earlier compounds and, if so, in which respects. This is assessed on data from the BNC with respect to some of the features that are cited in the literature as defining properties of neoclassical compounds, specifically, their internal configuration, the occurrence or not of a linking vowel, and their productivity.

  13. Palladium catalyzed hydrogenation of bio-oils and organic compounds

    Elliott, Douglas C.; Hu, Jianli; Hart, Todd R.; Neuenschwander, Gary G.

    2008-09-16

    The invention provides palladium-catalyzed hydrogenations of bio-oils and certain organic compounds. Experimental results have shown unexpected and superior results for palladium-catalyzed hydrogenations of organic compounds typically found in bio-oils.

  14. Organic compounds inhibiting S. epidermidis adhesion and biofilm formation

    Qin, Zhiqiang; Zhang, Jingdong; Hu, Yifan;

    2009-01-01

    air and aqueous environments. We have investigated the inhibitory effects of surfaces treated with four organic compounds, two benzoate derivatives denoted as compound 59 and 75 and two carboxamicle derivatives denoted as compound 47 and 73, on S. epidermidis adhesion and biofilm formation. All four...... compounds evoke significant inhibitory effects on the formation of S. epidermidis biofilms with compounds 47 and 73 being most effective. None of the compounds were found to inhibit growth of S. epidermidis in liquid cultures. Bacteria attached to the substrate when exposed to the compounds were not...... affected indicating that these compounds inhibit initial adhesion. These results suggest a pretreatment for medically implanted surfaces that can prevent the biofilm formation and reduce infection....

  15. Compound droplet manipulations on fiber arrays

    Weyer, Floriane; Dreesen, Laurent; Vandewalle, Nicolas

    2015-01-01

    Recent works demonstrated that fiber arrays may constitue the basis of an open digital microfluidics. Various processes, such as droplet motion, fragmentation, trapping, release, mixing and encapsulation, may be achieved on fiber arrays. However, handling a large number of tiny droplets resulting from the mixing of several liquid components is still a challenge for developing microreactors, smart sensors or microemulsifying drugs. Here, we show that the manipulation of tiny droplets onto fiber networks allows for creating compound droplets with a high complexity level. Moreover, this cost-effective and flexible method may also be implemented with optical fibers in order to develop fluorescence-based biosensor.

  16. Penta-coordinate phosphorous compounds and biochemistry

    林长学; 韩波; 赵玉芬; 万荣; 李艳梅; 冯亚兵; 成昌梅

    2002-01-01

    The relationship between penta-coordinate phosphorus compounds and biochemistry is briefly reviewed. Some interesting phenomena such as peptide formation, ester formation, ester exchange on phosphorus and N to O migration occur at room temperature when the amino group of amino acid is associated with phosphoryl group. Serine or threonine in conjugate of nucleo-side-amino acid could recognize different nucleobases. N-phosphoryl Histine and Ser-His dipep-tide could cleavage nucleic acid, protein and ester in neutral medium. It is found that the above phenomena all undergo penta-coordinate intermediate of phosphorus atom, which is proposed as the key factor to determine their activities.

  17. Aromatic compounds from three Brazilian Lauraceae species

    Andrea Nastri de Luca Batista

    2010-01-01

    Full Text Available Phytochemical investigations on three Brazilian Lauraceae species from the Cerrado region of São Paulo State, Ocotea corymbosa (Meins Mez., O. elegans Mez. and Persea pyrifolia Nees & Mart. ex Nees resulted in the isolation of flavonoids, an ester of the 4-O-E-caffeoylquinic acid, an aromatic sesquiterpene besides furofuran lignans. This is the first chemical study on the leaves of Ocotea elegans and O. corymbosa as well as the first report of non-volatile compounds from Persea pyrifolia.

  18. Compound odontoma associated with impacted maxillary incisors

    S Sreedharan

    2012-01-01

    Full Text Available Odontomas are considered to be the most common odontogenic tumors of the oral cavity. Some authors consider it as malformations rather than true neoplasms. The exact etiology of odontomes is still not known. Most odontomes are asymptomatic and are discovered during routine radiographic investigations. Odontomes generally cause disturbances in the eruption of the teeth, most commonly delayed eruption or deflection. The present report describes the surgical management of a case of compound odontoma in a 10-year-old boy who presented with a complaint of swelling in the maxillary right anterior region and retained deciduous incisors. The related literature is also being reviewed in this article.

  19. The Q, Compound Q is Finally Deciphered

    Bhagi-Damodaran, Ambika; Lu, Yi

    2015-01-01

    Methane monooxygenases (MMOs) activate the high energy C-H bond of methane and convert it to methanol with high selectivity and under physiological conditions. Despite decades of efforts focusing on elucidating the structure, function and mechanism of soluble MMOs, the structure of a key intermediate (called compound Q) remained unknown. This article highlights a recent report by Banerjee et. al. which not only firmly establishes the core-structure of Q, but also provides significant insight into its formation, reaction with methane and eventual decay. PMID:26346336

  20. Radioisotope method of compound flow analysis

    Petryka, L.; Zych, M.; Hanus, R.; Sobota, J.; Vlasák, Pavel; Malczewska, B.

    Liberec: Technical university of Liberec, 2014 - (Dančová, P.; Vít, T.), s. 459-462. (EPJ Web of Conferences). ISSN 2100-014X. [Experimental Fluid Mechanics 2014. Český Krumlov (CZ), 18.11.2014-21.11.2014] R&D Projects: GA ČR GAP105/10/1574 Grant ostatní: National Science Centre of Poland(PL) N N523 755340 Institutional support: RVO:67985874 Keywords : compound flow analysis * Cross Correlation Analysis * hydrotransport of solid particles Subject RIV: BK - Fluid Dynamics

  1. Preparation of some compounded soup powders

    B. S. Bhatia

    1961-01-01

    Full Text Available Recipes for the preparation of some compounded soup powders from tomatoes, potatoes, carrots, green peas, dried peas, chicken and mutton using components like corn starch, skim milk powder, hydrogenated groundnut oil, common salt, mixed spices (black pepper, caraway and ginger and monosodium glutamate have been developed. Pretreatment and drying conditions for the preparation of pre-cooked dry bases from tomatoes, potatoes, carrots, green peas, dried peas, chicken and mutton have been determined. Except for tomatoes where vacuum drier is necessary, other bases can be easily prepared in a simple cross flow hot air cabinet drier and used subsequently in the preparation of soup powders.

  2. Magnetic ordering in trigonal chain compounds

    Eyert, V.; Schwingenschloegl, U.; Hackenberger, C.; Kopp, T.; Fresard, R.; Eckern, U.

    2005-01-01

    We present electronic structure calculations for the one-dimensional magnetic chain compounds Ca_3CoRhO_6 and Ca_3FeRhO_6. The calculations are based on density functional theory and the local density approximation. We use the augmented spherical wave (ASW) method. The observed alternation of low- and high-spin states along the Co-Rh and Fe-Rh chains is related to differences in the oxygen coordination of the transition metal sites. Due to strong hybridization the O 2p states are polarized, g...

  3. Surfacing of drawplates by compound alloys

    Myshko, Y.D.; Gladchenko, A.N.; Gonchak, N.E.; Matkovskii, N.V.; Nechiporenko, V.G.

    1984-01-01

    Hard alloy sleeves fixed by soldering them with silver solder to drawplates of pelletizing heads in machinery used for processing plastic materials does not provide the required strength. A technology for surfacing the drawplates with wear-resistant alloys type VK8+MNMts by thermal impregnation has been developed. The strength of the compound alloy tested depends on the wetting of the solid phase by the matrix alloy-binder. The systems studied possessed high wettability and a stable bond between the phases. Surfaces drawplates have been successfully tested.

  4. A novel crystalline SiCO compound.

    Marqués, Miriam; Morales-García, Angel; Menéndez, José Manuel; Baonza, Valentín G; Recio, José Manuel

    2015-10-14

    Ab initio evolutionary structural searches have been performed on SixCyO2(x+y) compounds. A novel structure, with SiC2O6 stoichiometry and the P21/c space group is calculated to be stable against decomposition within a wide pressure window from 7.2 to 41 GPa, and metastable under ambient conditions. It consists of CO3 units, linked to SiO6 octahedra, supporting previous experimental studies. The evolution of the carbon environment towards tetrahedral CO4 units, thus resembling the crystal chemistry of silicon, is predicted at higher pressures. PMID:26345349

  5. Vapor deposition of tantalum and tantalum compounds

    Tantalum, and many of its compounds, can be deposited as coatings with techniques ranging from pure, thermal chemical vapor deposition to pure physical vapor deposition. This review concentrates on chemical vapor deposition techniques. The paper takes a historical approach. The authors review classical, metal halide-based techniques and current techniques for tantalum chemical vapor deposition. The advantages and limitations of the techniques will be compared. The need for new lower temperature processes and hence new precursor chemicals will be examined and explained. In the last section, they add some speculation as to possible new, low-temperature precursors for tantalum chemical vapor deposition

  6. Analysis of lunar samples for carbon compounds.

    Kvenvolden, K. A.

    1971-01-01

    Description of one approach to the analysis for carbon compounds in lunar materials from the Apollo 11 mission. The sequential scheme followed generally accepted organic geochemical practices, but was unusual in its application to a single sample. The procedures of the scheme were designed to minimize handling of the solids and extracts or hydrolysates. The solid lunar sample was retained in all steps of the sequential analysis in the vessel in which it was originally placed. Centrifugation was used to separate solid and liquid phases after extraction or refluxing. Liquids were recovered from solids by decantation.

  7. Chemically engineered extracts: source of bioactive compounds.

    Ramallo, I Ayelen; Salazar, Mario O; Mendez, Luciana; Furlan, Ricardo L E

    2011-04-19

    Biological research and drug discovery critically depend on access to libraries of small molecules that have an affinity for biomacromolecules. By virtue of their sustained success as sources of lead compounds, natural products are recognized as "privileged" starting points in structural space for library development. Compared with synthetic compounds, natural products have distinguishing structural properties; indeed, researchers have begun to quantify and catalog the differences between the two classes of molecules. Measurable differences in the number of chiral centers, the degree of saturation, the presence of aromatic rings, and the number of the various heteroatoms are among the chief distinctions between natural and synthetic compounds. Natural products also include a significant proportion of recurring molecular scaffolds that are not present in currently marketed drugs: the bioactivity of these natural substructures has been refined over the long process of evolution. In this Account, we present our research aimed at preparing libraries of semisynthetic compounds, or chemically engineered extracts (CEEs), through chemical diversification of natural products mixtures. The approach relies on the power of numbers, that is, in the chemical alteration of a sizable fraction of the starting complex mixture. Major changes in composition can be achieved through the chemical transformation of reactive molecular fragments that are found in most natural products. If such fragments are common enough, their transformation represents an entry point for chemically altering a high proportion of the components of crude natural extracts. We have searched for common reactive fragments in the Dictionary of Natural Products (CRC Press) and identified several functional groups that are expected to be present in a large fraction of the components of an average natural crude extract. To date, we have used reactions that incorporate (i) nitrogen atoms through carbonyl groups, (ii

  8. Polymers contamination by heavy metal compounds

    Jovanić Saša; Stoiljković Dragoslav M.; Popović Ivanka G.

    2002-01-01

    The contamination of important synthetic (surface unmodified) polymers by various heavy metal compounds (such as copper, manganese and lead) in aqueous medium was investigated in this study. The influence of the pH of the aqueous medium, temperature and metal type on contamination was investigated during a 10 day period. It was found that increasing pH contributed to higher polymer contamination (at higher pH 100 times for copper and up to 400 times for lead), as well as contact with easily p...

  9. Multicutter machining of compound parametric surfaces

    Hatna, Abdelmadjid; Grieve, R. J.; Broomhead, P.

    2000-10-01

    Parametric free forms are used in industries as disparate as footwear, toys, sporting goods, ceramics, digital content creation, and conceptual design. Optimizing tool path patterns and minimizing the total machining time is a primordial issue in numerically controlled (NC) machining of free form surfaces. We demonstrate in the present work that multi-cutter machining can achieve as much as 60% reduction in total machining time for compound sculptured surfaces. The given approach is based upon the pre-processing as opposed to the usual post-processing of surfaces for the detection and removal of interference followed by precise tracking of unmachined areas.

  10. Spin and orbital moments in actinide compounds

    Lebech, B.; Wulff, M.; Lander, G.H.

    1991-01-01

    -electron band-structure calculations, is that the orbital moments of the actinide 5f electrons are considerably reduced from the values anticipated by a simple application of Hund's rules. To test these ideas, and thus to obtain a measure of the hybridization, we have performed a series of neutron scattering...... experiments designed to determine the magnetic moments at the actinide and transition-metal sublattice sites in compounds such as UFe2, NpCo2, and PuFe2 and to separate the spin and orbital components at the actinide sites. The results show, indeed, that the ratio of the orbital to spin moment is reduced as...

  11. [Synthesis of indole compounds using multifunctional synthons].

    Abe, Takumi

    2013-01-01

    This review describes a synthesis of indole compounds using multifunctional synthons. The multifunctional synthons, trienes and gramines, were respectively synthesized using Pd-catalyzed tandem cyclization/cross-coupling reaction of indolylborate with vinyl bromide, and reaction of indolylcuprate with iminium chloride. As an application of the multifunctional synthons to the indole alkaloids synthesis, we accomplished the total synthesis of ellipticine, 9-methoxyellipticine, 9-hydroxyellipticine, tetrahydroellipticine, μ-alkaloid B, μ-alkaloid D, calothrixin A, calothrixin B, tubifoline, and yuehchukene. We have also developed 6π-electrocyclization of hexatrienes catalyzed by Cu(I) trifluoromethanesulfonate toluene complexe, which is unprecedented. PMID:23292026

  12. Adsorption capacity of phenolic compounds onto cellulose and xylan

    Telma dos Santos Costa; Hervé Rogez; Rosinelson da Silva Pena

    2015-01-01

    The interaction between three phenolic compounds (catechin, caffeic acid and ferulic acid) onto two dietary fibres (cellulose and xylan) has been evaluated to inquire possible interferences on the biodisponibility of phenolic compounds. The adsorption kinetics were performed using solutions containing 100 mg/L of phenolic compounds during a contact time ranging between 10 and 120 minutes at pH 2.0, 4.5, and 7.0. After the kinetics, isotherms were obtained using phenolic compounds concentratio...

  13. Oceanic protection of prebiotic organic compounds from UV radiation

    Cleaves, H. James; Miller, Stanley L.

    1998-01-01

    It is frequently stated that UV light would cause massive destruction of prebiotic organic compounds because of the absence of an ozone layer. The elevated UV flux of the early sun compounds this problem. This applies to organic compounds of both terrestrial and extraterrestrial origin. Attempts to deal with this problem generally involve atmospheric absorbers. We show here that prebiotic organic polymers as well as several inorganic compounds are sufficient to protect oceanic organic molecul...

  14. Diffusion of coal-tar compounds in natural clayey till

    Broholm, Mette M.; Broholm, Kim; Arvin, Erik

    2000-01-01

    The diffusion of coal-tar compounds in natural clayey till was studied. Diffusion profile data strongly indicated highly non-linear sorption isotherms with significantly stronger sorption of the most strongly sorbing compounds, in contrast to weaker sorption of the less strongly sorbing compounds......, at high solute concentrations. The observed diffusion profiles have important implications with respect to migration of coal-tar and dissolved coal-tar compounds in fractured clayey till....

  15. Phenolic Compounds in the Potato and Its Byproducts: An Overview

    Hazal Akyol; Ylenia Riciputi; Esra Capanoglu; Maria Fiorenza Caboni; Vito Verardo

    2016-01-01

    The potato (Solanum tuberosum L.) is a tuber that is largely used for food and is a source of different bioactive compounds such as starch, dietary fiber, amino acids, minerals, vitamins, and phenolic compounds. Phenolic compounds are synthetized by the potato plant as a protection response from bacteria, fungi, viruses, and insects. Several works showed that these potato compounds exhibited health-promoting effects in humans. However, the use of the potato in the food industry submits this v...

  16. Sulfur-containing compounds in \\kur{Ferula} species

    TICHÁ, Iveta

    2012-01-01

    The theoretical part of the Bachelor thesis is focused on Ferula genus plants, their significance, occurrence and usage. The thesis also deals with their sulfur-containing compounds and the formation pathways of the sulfur compounds occurring in the Allium genus. In the experimental part, the most important Ferula volatile sulfur compounds and their possible precursor are investigated. The precursor was suggested on the basis of the principle of similar sulfur compounds in Ferula genus plants...

  17. The synthesis of cementitious compounds in molten salts

    Sheikh, R. A.

    2016-01-01

    This thesis describes an investigation into the synthesis of cementitious compounds in molten salts. These compounds are produced in energy-intensive industries (EIIs), such as the cement process, and are responsible for emitting significant quantities of carbon dioxide (CO2) emissions. Molten salt synthesis (MSS) involves dissolving compounds in a molten salt and reacting in solution. If the MSS of cementitious compounds can occur at lower temperatures than EIIs, this could lead to fewer qua...

  18. Experimental and theoretical studies of manganite and magnetite compounds Transition oxide compounds

    Srinitiwarawong, C

    2002-01-01

    In the recent years interest in the transition oxide compounds has renewed among researchers in the field of condensed matter physics. This thesis presents the studies of the two families of the transition oxides, the manganite and magnetite compounds. Manganite has regained the interest since the discovery of the large magnetoresistance around its Curie temperature in 1990s. Magnetite on the other hand is the oldest magnetic material known to man however some of its physical properties are still controversial. The experimental works address some basic properties of these compounds when fabricated in the form of thin films. These include the resistivity measurements and magnetic measurements as well as the Hall effect. The various models of transport mechanism have been compared. The magnetic field and the temperature dependence of magnetoresistance have also been studied. Simple devices such as an artificial grain boundary and bilayers thin film have been investigated. The second part of this thesis concentr...

  19. Enzymatic Conversion of Aromatic Compounds Obtained from Crop Residues

    Biomass obtained from crop residues and the related processing wastes typically contain minor amounts of aromatic compounds such as ferulic and p-coumaric acids. These compounds occur as esters and ethers associated with plant cell wall structures and as components of lignin. These compounds exhibit...

  20. Coordination compounds of transition metal chlorides with tetrazoles

    Coordination compounds (CC) of Co(2), Ni(2), Cu(2), Cd(2) chlorides with tetrazole and Ni(2) and Cd(2) chloride CC with tetrazolylhydrazone benzaldehyde are synthesized. The compounds are characterized by electron- and IR-spectroscopy, magnetic measurements (78-300 K), radiography. Conclusions are made on polynuclear structure of coordination compounds and Msup((2)) octahedron coordination

  1. Antimicrobial compounds as side products from the agricultural processing industry

    Sumthong, Pattarawadee

    2007-01-01

    Antimicrobial compounds have many applications, in medicines, food, agriculture, livestock, textiles, paints, and wood protectants. Microorganisms resistant to most antibiotics are rapidly spreading. Consequently there is an urgent and continuous need for novel antimicrobial compounds. Most antibiotics have been developed from microorganisms. Plants also represent an important source for finding novel antimicrobial compounds, as plants in their permanent fight with microorganisms in their env...

  2. Reduction of aromatic and heteroaromatic azo compounds with hydrazine hydrate

    Sevim Rollas

    2010-01-01

    ABSTRACT: The azo compounds have been reduced with hydrazine hydrate in the presenceof a catalyst or without a catalyst. This reaction is an atractive alternate for the reduction ofazo functional group to obtain new amines. In this review, the reduction of aromatic or heteroaromaticazo compounds with hydrazine hydrate have been reported.KEYWORDS: Reduction, azo compounds, uncatalyzed reduction, hydrazine hydrate.

  3. Biodegradation of NSO-compounds under different redox-conditions

    Dyreborg, S.; Arvin, E.; Broholm, K.

    Laboratory experiments were carried out to investigate the potential of groundwater microorganisms to degrade selected heterocyclic aromatic compounds containing nitrogen, sulphur, or oxygen (NSO-compounds) under four redox-conditions over a period of 846 days. Eight compounds (pyrrole, 1...

  4. Luminescence and energy transfer in hexavalent uranium compounds

    The author investigates the luminescence of uranate groups in uranates and examines the possible role of excitation energy transfer between the uranate groups in these compounds. Some uranyl compounds were investigated in order to compare the energy transfer in these compounds with that in the uranates. (G.T.H.)

  5. 46 CFR 153.1025 - Motor fuel antiknock compounds.

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 153.1025 Section 153... Cargo Procedures § 153.1025 Motor fuel antiknock compounds. (a) No person may load or carry any other cargo in a containment system approved for motor fuel antiknock compounds containing lead alkyls...

  6. 46 CFR 151.50-6 - Motor fuel antiknock compounds.

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Motor fuel antiknock compounds. 151.50-6 Section 151.50... BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-6 Motor fuel antiknock compounds. When transporting motor fuel antiknock compounds containing tetraethyl lead...

  7. Surface microlayer enrichment of volatile organic compounds and semivolatile organic compounds in drinking water source

    HUANG Zhi; ZHOU Wen; YU Ya-juan; ZHANG Ai-qian; HAN Shuo-kui; WANG Lian-sheng

    2004-01-01

    Enrichment of volatile organic compounds(VOC) and semi-volatility organic compounds(SVOC) in surface microlayer(SM) of three drinking water sources were studied. The enrichment factor(EFs) were 0.67 to 13.37 and 0. 16 to 136, respectively. The results showed some VOC and most SVOC could enrich in SM. Some EFs of SVOC was quite high. Suspension and temperature could affect EFs of SVOC, slim wind and water movement do not destroy enrichment of organic in SM.

  8. Thermoelectric transport in rare-earth compounds

    Koehler, Ulrike

    2007-07-01

    This work focuses on the thermoelectric transport in rare-earth compounds. The measurements of the thermal conductivity, thermopower, and Nernst coefficient are supplemented by investigations of other quantities as magnetic susceptibility and specific heat. Chapter 2 provides an introduction to the relevant physical concepts. Section 1 of that chapter summarizes the characteristic properties of rare-earth systems; section 2 gives an overview on thermoelectric transport processes in magnetic fields. The applied experimental techniques as well as the new experimental setup are described in detail in Chapter 3. The experimental results are presented in Chapter 4-6, of which each concentrates on a different subject. In Chapter 4, various Eu clathrates and the skutterudite-like Ce{sub 3}Rh{sub 4}Sn{sub 13} are presented, which have been investigated as potential thermoelectric materials for applications. Chapter 5 focusses on the study of the energy scales in the heavy-fermion series Lu{sub 1-x}Yb{sub x}Rh{sub 2}Si{sub 2} and Ce{sub x}La{sub 1-x}Ni{sub 2}Ge{sub 2} by means of thermopower investigations. Chapter 6 is dedicated to the thermoelectric transport properties of the correlated semimetal CeNiSn with special emphasis on the Nernst coefficient of this compound. (orig.)

  9. Placental transfer of iodine and iodine compounds

    The following topics are valid for man and mammalians with haemochorial placenta, which are examined up to now: Within several hours after injection of radioactive inorganic iodide-compounds activity can be realized in the fetus. The transfer occurs bidirectionally through the placenta. The concentration of radioactive iodide in the fetal serum exceeds that of the maternal one already a short time after application. Radioactive iodide accumulates in the fetus before its thyroid starts its function and is mainly concentrated in liver and intestine; after starting its function, the fetal thyroid, stores the radioactive iodide at a very high percent rate. During gestation the concentration of radioactive iodide in the fetal thyroid increases and at the end of gestation it can exceed by 3-10 fold that in the maternal thyroid. Single uptake of radioactive iodide leads to a higher activity than chronic uptake. No analogy can be found in the concentration of fetal and maternal radioactive thyroid hormon compounds. A placental permeability for T4 and T3 only exists to a very small extent. Resulting from radioactive iodide transfer examinations, good accordance can be found between the individual animal species and man, while data on the passage of radioactive thyroid hormones vary to a small extent between the animal species. (orig./MG)

  10. Estimation of Stability Constants of Complex Compounds

    Raos, N.

    Full Text Available The stability constant of a complex generally depends on the electronic, stereochemical and steric factors, as well as on the chelate effect and interaction of the complex, metal and ligand with water. In the first part of the paper we discuss the Irving-Williams order of stability of bivalent transition metal ion complexes from Mn2+ to Zn2+, along with the HSAB model (hard and soft acids and bases of stability. The second part describes three kinds of models for the estimation of the stability constants of complex compounds. First are those based on molecular mechanics, which were used mainly for the estimation of the enantioselectivity effect, i. e. Gibbs energy differences between MLL and MDL isomers. The second kind of models are mechanistic, that rest on the presumption of linear dependence of measured stability constants of the complexes with the same ligand (stability constants of mono- and bis-complexes, protonation constants, etc.. The third kind of models are heuristic (QSPR, which encompass molecular descriptors calculated by the method of overlapping spheres (OS, as well as topological indices. Among the variety of topological indices, connectivity indices proved best. They were calculated for the ligand and various representations of the coordination compound structure.

  11. Metabolic Reactions among Organic Sulfur Compounds

    Schulte, M.; Rogers, K.

    2005-01-01

    Sulfur is central to the metabolisms of many organisms that inhabit extreme environments. Numerous authors have addressed the energy available from a variety of inorganic sulfur redox pairs. Less attention has been paid, however, to the energy required or gained from metabolic reactions among organic sulfur compounds. Work in this area has focused on the oxidation of alkyl sulfide or disulfide to thiol and formaldehyde, e.g. (CH3)2S + H2O yields CH3SH + HCHO + H2, eventually resulting in the formation of CO2 and SO4(-2). It is also found that reactions among thiols and disulfides may help control redox disequilibria between the cytoplasm and the periplasm. Building on our earlier efforts for thiols, we have compiled and estimated thermodynamic properties for alkyl sulfides. We are investigating metabolic reactions among various sulfur compounds in a variety of extreme environments, ranging from sea floor hydrothermal systems to organic-rich sludge. Using thermodynamic data and the revised HKF equation of state, along with constraints imposed by the geochemical environments sulfur-metabolizing organisms inhabit, we are able to calculate the amount of energy available to these organisms.

  12. Degraded Compound Multi-receiver Wiretap Channels

    Ekrem, Ersen

    2009-01-01

    In this paper, we study the degraded compound multi-receiver wiretap channel. The degraded compound multi-receiver wiretap channel consists of two groups of users and a group of eavesdroppers, where, if we pick an arbitrary user from each group of users and an arbitrary eavesdropper, they satisfy a certain Markov chain. We study two different communication scenarios for this channel. In the first scenario, the transmitter wants to send a confidential message to users in the first (stronger) group and a different confidential message to users in the second (weaker) group, where both messages need to be kept confidential from the eavesdroppers. For this scenario, we assume that there is only one eavesdropper. We obtain the secrecy capacity region for the general discrete memoryless channel model, the parallel channel model, and the Gaussian parallel channel model. For the Gaussian multiple-input multiple-output (MIMO) channel model, we obtain the secrecy capacity region when there is only one user in the second...

  13. Encapsulation of Natural Polyphenolic Compounds; a Review

    Florence Edwards-Lévy

    2011-11-01

    Full Text Available Natural polyphenols are valuable compounds possessing scavenging properties towards radical oxygen species, and complexing properties towards proteins. These abilities make polyphenols interesting for the treatment of various diseases like inflammation or cancer, but also for anti-ageing purposes in cosmetic formulations, or for nutraceutical applications. Unfortunately, these properties are also responsible for a lack in long-term stability, making these natural compounds very sensitive to light and heat. Moreover, polyphenols often present a poor biodisponibility mainly due to low water solubility. Lastly, many of these molecules possess a very astringent and bitter taste, which limits their use in food or in oral medications. To circumvent these drawbacks, delivery systems have been developed, and among them, encapsulation would appear to be a promising approach. Many encapsulation methods are described in the literature, among which some have been successfully applied to plant polyphenols. In this review, after a general presentation of the large chemical family of plant polyphenols and of their main chemical and biological properties, encapsulation processes applied to polyphenols are classified into physical, physico-chemical, chemical methods, and other connected stabilization methods. After a brief description of each encapsulation process, their applications to polyphenol encapsulation for pharmaceutical, food or cosmetological purposes are presented.

  14. Differential scaling within an insect compound eye.

    Perl, Craig D; Niven, Jeremy E

    2016-03-01

    Environmental and genetic influences cause individuals of a species to differ in size. As they do so, organ size and shape are scaled to available resources whilst maintaining function. The scaling of entire organs has been investigated extensively but scaling within organs remains poorly understood. By making use of the structure of the insect compound eye, we show that different regions of an organ can respond differentially to changes in body size. Wood ant (Formica rufa) compound eyes contain facets of different diameters in different regions. When the animal body size changes, lens diameters from different regions can increase or decrease in size either at the same rate (a 'grade' shift) or at different rates (a 'slope' shift). These options are not mutually exclusive, and we demonstrate that both types of scaling apply to different regions of the same eye. This demonstrates that different regions within a single organ can use different rules to govern their scaling, responding differently to their developmental environment. Thus, the control of scaling is more nuanced than previously appreciated, diverse responses occurring even among homologous cells within a single organ. Such fine control provides a rich substrate for the diversification of organ morphology. PMID:26979561

  15. Compound Refractive Lenses for Thermal Neutron Applications

    Gary, Charles K.

    2013-11-12

    This project designed and built compound refractive lenses (CRLs) that are able to focus, collimate and image using thermal neutrons. Neutrons are difficult to manipulate compared to visible light or even x rays; however, CRLs can provide a powerful tool for focusing, collimating and imaging neutrons. Previous neutron CRLs were limited to long focal lengths, small fields of view and poor resolution due to the materials available and manufacturing techniques. By demonstrating a fabrication method that can produce accurate, small features, we have already dramatically improved the focal length of thermal neutron CRLs, and the manufacture of Fresnel lens CRLs that greatly increases the collection area, and thus efficiency, of neutron CRLs. Unlike a single lens, a compound lens is a row of N lenslets that combine to produce an N-fold increase in the refraction of neutrons. While CRLs can be made from a variety of materials, we have chosen to mold Teflon lenses. Teflon has excellent neutron refraction, yet can be molded into nearly arbitrary shapes. We designed, fabricated and tested Teflon CRLs for neutrons. We demonstrated imaging at wavelengths as short as 1.26 ? with large fields of view and achieved resolution finer than 250 μm which is better than has been previously shown. We have also determined designs for Fresnel CRLs that will greatly improve performance.

  16. Magnetic form factor studies of actinide compounds

    Some results obtained at ILL on Actinide compound form factors are reviewed. In the paramagnetic NpO2 single crystal (5mg), an induced magnetic moment of 0.07μsub(B) was obtained at 4.2K (4.6T). In the ferromagnetic phase of NpAs2 single crystal (0.2mm3), the magnetic moment (1.46μsub(B)/Np atom) has been found fixed along the [001] direction. In both cases, the Np form factors fit satisfactorily the Np4+ form factor calculated with relativistic atomic wave functions. The Fermi length for Np was deduced (b(Np) = 1.015(15)10-12cm). In the paramagnetic Laves phase UNi2 compound, equally small moments are observed on U atom (0.013(1)μsub(B)) and on Ni atom (0.016(1)μsub(B)) confirming important changes in 3d band structure of Ni by hybridization with U electrons

  17. Polyphenol Compound as a Transcription Factor Inhibitor

    Seyeon Park

    2015-10-01

    Full Text Available A target-based approach has been used to develop novel drugs in many therapeutic fields. In the final stage of intracellular signaling, transcription factor–DNA interactions are central to most biological processes and therefore represent a large and important class of targets for human therapeutics. Thus, we focused on the idea that the disruption of protein dimers and cognate DNA complexes could impair the transcriptional activation and cell transformation regulated by these proteins. Historically, natural products have been regarded as providing the primary leading compounds capable of modulating protein–protein or protein-DNA interactions. Although their mechanism of action is not fully defined, polyphenols including flavonoids were found to act mostly as site-directed small molecule inhibitors on signaling. There are many reports in the literature of screening initiatives suggesting improved drugs that can modulate the transcription factor interactions responsible for disease. In this review, we focus on polyphenol compound inhibitors against dimeric forms of transcription factor components of intracellular signaling pathways (for instance, c-jun/c-fos (Activator Protein-1; AP-1, c-myc/max, Nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB and β-catenin/T cell factor (Tcf.

  18. Fungal Laccases Degradation of Endocrine Disrupting Compounds

    Gemma Macellaro

    2014-01-01

    Full Text Available Over the past decades, water pollution by trace organic compounds (ng/L has become one of the key environmental issues in developed countries. This is the case of the emerging contaminants called endocrine disrupting compounds (EDCs. EDCs are a new class of environmental pollutants able to mimic or antagonize the effects of endogenous hormones, and are recently drawing scientific and public attention. Their widespread presence in the environment solicits the need of their removal from the contaminated sites. One promising approach to face this challenge consists in the use of enzymatic systems able to react with these molecules. Among the possible enzymes, oxidative enzymes are attracting increasing attention because of their versatility, the possibility to produce them on large scale, and to modify their properties. In this study five different EDCs were treated with four different fungal laccases, also in the presence of both synthetic and natural mediators. Mediators significantly increased the efficiency of the enzymatic treatment, promoting the degradation of substrates recalcitrant to laccase oxidation. The laccase showing the best performances was chosen to further investigate its oxidative capabilities against micropollutant mixtures. Improvement of enzyme performances in nonylphenol degradation rate was achieved through immobilization on glass beads.

  19. Rhenium coordination compounds : a structural study

    The Thesis is based on the development and systematic physicochemical study of a family of new precursors for the synthesis of Re(III) complexes by ligand substitution, which do not show the drawbacks of the pre-existing starting compounds. The capacity of thiourea and its alkyl derivatives (L) to stabilize the +3 oxidation state for Re, with the formation of [ReIIIL6]3+ complexes, is established. The structural (X ray diffraction methods), spectral (IR, electronic UV-vis, NMR) and redox (cyclic voltammetry) properties of these new complexes are studied and compared to those of some Technetium analogous compounds. Arylthioureas also stalilize Re(III). A new synthetic route for Re(III) complexes, starting from these precursors in aqueous, alcoholic and hydroalcoholic media, is designed. Incoming ligands tested are polyaminepolycarboxylic acids and diphosphines. Kinetics of decomposition of the Re precursors and of ligand substitution onto these precursors by polyaminepolycarboxylic acids is studied. Significant differences (mainly in decomposition and substitution kinetics and redox properties) and similarities between Re and Tc chemistry in the low oxidation state +3 are established and discussed. Having in mind the differences, the potentiality in Radiopharmacy of these Re(III) precursors for the synthesis of new agents for therapy is discussed. In addition, a new Re(V) oxo precursor with tetramethylthiourea as ligand is developed, characterized and tested using diethyldithiocarbamate as incoming ligand

  20. Perspectives of antimony compounds in oncology

    Pankaj SHARMA; Diego PEREZ; Armando CABRERA; Nee ROSAS; Jose Luis ARIAS

    2008-01-01

    Antimony, a natural element that has been used as a drug for over more than 100 years, has remarkable therapeutic efficacy in patients with acute promyelocytic leukemia. This review focuses on recent advances in developing antimony anti- cancer agents with an emphasis on antimony coordination complexes, Sb (Ⅲ) and Sb (V). These complexes, which include many organometallic complexes, may provide a broader spectrum of antitumoral activity. They were compared with classical platinum anticancer drugs. The review covers the literature data pub- lished up to 2007. A number of antimonials with different antitumoral activities are known and have diverse applications, even though little research has been done on their possibilities. It might be feasible to develop more specific and effective inhibitors for phosphatase-targeted, anticancer therapeutics through the screen- ing of sodium stibogluconate (SSG) and potassium antimonyltartrate-related compounds, which are comprised of antimony conjugated to different organic moieties. For example, SSG appears to be a better inhibitor than suramin which is a compound known for its antineoplastic activity against several types of cancers.

  1. Occupational exposure to chromium(VI compounds

    Jolanta Skowroń

    2015-07-01

    Full Text Available This article discusses the effect of chromium(VI (Cr(VI on human health under conditions of acute and chronic exposure in the workplace. Chromium(VI compounds as carcinogens and/or mutagens pose a direct danger to people exposed to them. If carcinogens cannot be eliminated from the work and living environments, their exposure should be reduced to a minimum. In the European Union the proposed binding occupational exposure limit value (BOELV for chromium(VI of 0.025 mg/m³ is still associated with high cancer risk. Based on the Scientific Commitee of Occupational Exposure Limits (SCOEL document chromium(VI concentrations at 0.025 mg/m³ increases the risk of lung cancer in 2–14 cases per 1000 exposed workers. Exposure to chromium(VI compounds expressed in Cr(VI of 0.01 mg Cr(VI/m3 is responsible for the increased number of lung cancer cases in 1–6 per 1000 people employed in this condition for the whole period of professional activity. Med Pr 2015;66(3:407–427

  2. [Occupational exposure to chromium(VI) compounds].

    Skowroń, Jolanta; Konieczko, Katarzyna

    2015-01-01

    This article discusses the effect of chromium(VI) (Cr(VI)) on human health under conditions of acute and chronic exposure in the workplace. Chromium(VI) compounds as carcinogens and/or mutagens pose a direct danger to people exposed to them. If carcinogens cannot be eliminated from the work and living environments, their exposure should be reduced to a minimum. In the European Union the proposed binding occupational exposure limit value (BOELV) for chromium(VI) of 0.025 mg/m³ is still associated with high cancer risk. Based on the Scientific Commitee of Occupational Exposure Limits (SCOEL) document chromium(VI) concentrations at 0.025 mg/m³ increases the risk of lung cancer in 2-14 cases per 1000 exposed workers. Exposure to chromium(VI) compounds expressed in Cr(VI) of 0.01 mg Cr(VI)/m3; is responsible for the increased number of lung cancer cases in 1-6 per 1000 people employed in this condition for the whole period of professional activity. PMID:26325053

  3. Main antimicrobial compounds in table olives.

    Medina, Eduardo; Brenes, Manuel; Romero, Concepción; García, Aranzazu; de Castro, Antonio

    2007-11-28

    The inhibitors involved in the lactic acid fermentation of table olives were investigated in aseptic olive brines of the Manzanilla and Gordal varieties. Phenolic and oleosidic compounds in these brines were identified by high-performance liquid chromatography with ultraviolet and electrospray ionization mass spectrometry detection, and several substances were also characterized by nuclear magnetic resonance. Among these compounds, the dialdehydic form of decarboxymethyl elenolic acid linked to hydroxytyrosol showed the strongest antilactic acid bacteria activity, and its presence in brines could explain the growth inhibition of these microorganisms during olive fermentation. However, it was found that the dialdehydic form of decarboxymethyl elenolic acid, identified for the first time in table olives, and an isomer of oleoside 11-methyl ester were also effective against Lactobacillus pentosus and can, therefore, contribute to the antimicrobial activity of olive brines. It must also be stressed that the three new inhibitors discovered in table olive brines exerted a more potent antibacterial activity than the well-studied oleuropein and hydroxytyrosol. PMID:17970590

  4. Analysis of cell death inducing compounds.

    Spicker, Jeppe S; Pedersen, Henrik Toft; Nielsen, Henrik Bjørn; Brunak, Søren

    2007-11-01

    Biomarkers for early detection of toxicity hold the promise of improving the failure rates in drug development. In the present study, gene expression levels were measured using full-genome RAE230 version 2 Affymetrix GeneChips on rat liver tissue 48 h after administration of six different compounds, three toxins (ANIT, DMN and NMF) and three non-toxins (Caeruelein, Dinitrophenol and Rosiglitazone). We identified three gene transcripts with exceptional predictive performance towards liver toxicity and/or changes in histopathology. The three genes were: glucokinase regulatory protein (GCKR), ornithine aminotransferase (OAT) and Cytochrome P450, subfamily IIC (mephenytoin 4-hydroxylase) (Cyp2C29). RT-PCR for these three genes was performed and four additional compounds were included for validation. The quantitative RT-PCR analysis confirmed the findings based on the microarray data and using the three genes a classification rate of 55 of 57 samples was achieved for the classification of not toxic versus toxic. The single most promising biomarker (OAT) alone resulted in a surprisingly 100% correctly classified samples. OAT has not previously been linked to toxicity and cell death in the literature and the novel finding represents a putative hepatotoxicity biomarker. PMID:17503021

  5. Precipitation of organic compounds in soils

    Precipitation samples collected in Hannover in 1990/1991 were analyzed for various organic compound classes. The following average concentrations were observed: formaldehyde (111 μg/l), acetaldehyde (12.0 μg/l), propionaldehyde (4.7 μg/l), n-alkanes from n-C18H38 to n-C33H68 (52.2 μg/l), polycyclic aromatic hydrocarbons (PAHs) (in summer 1989: 351.0 ng/l, in fall 1989: 765 ng/l) higher fatty acids from C9-C26 (24.9 μg/l), phenol (8.4 μg/l), 3-/4-methylphenol (3.3 μg/l), 2-nitrophenol (0.18 μg/l) 4-nitrophenol (6.1. μg/l) and higher alkanols. These compounds are of predominantly biogenic origin (n-alkanes, fatty acids, n-alkanols), formed by photochemical reaction in the atmosphere (aldehydes, phenols) or due to direct antropogenic sources (PAHs). (orig.)

  6. Thermoelectric transport in rare-earth compounds

    This work focuses on the thermoelectric transport in rare-earth compounds. The measurements of the thermal conductivity, thermopower, and Nernst coefficient are supplemented by investigations of other quantities as magnetic susceptibility and specific heat. Chapter 2 provides an introduction to the relevant physical concepts. Section 1 of that chapter summarizes the characteristic properties of rare-earth systems; section 2 gives an overview on thermoelectric transport processes in magnetic fields. The applied experimental techniques as well as the new experimental setup are described in detail in Chapter 3. The experimental results are presented in Chapter 4-6, of which each concentrates on a different subject. In Chapter 4, various Eu clathrates and the skutterudite-like Ce3Rh4Sn13 are presented, which have been investigated as potential thermoelectric materials for applications. Chapter 5 focusses on the study of the energy scales in the heavy-fermion series Lu1-xYbxRh2Si2 and CexLa1-xNi2Ge2 by means of thermopower investigations. Chapter 6 is dedicated to the thermoelectric transport properties of the correlated semimetal CeNiSn with special emphasis on the Nernst coefficient of this compound. (orig.)

  7. Acoustic transmission through compound subwavelength slit arrays

    Ward, G. P.; Hibbins, A. P.; Sambles, J. R.; Smith, J. D.

    2016-07-01

    The angular dependence of the transmission of sound in air through four types of two-dimensional slit arrays formed of aluminium slats is explored, both experimentally and numerically. For a simple, subwavelength periodic slit array, it is well known that Fabry-Perot-like waveguide resonances, supported by the slit cavities, coupled to diffracted evanescent waves, result in enhanced acoustic transmission at frequencies determined by the length, width, and separation of each slit cavity. We demonstrate that altering the spacing or width of some of the slits to form a compound array (i.e., an array having a basis comprised of more than one slit) results in sharp dips in the transmission spectra, which may have a strong angular dependence. These features correspond to phase resonances, which have been studied extensively in the electromagnetic case. This geometry allows for additional near-field configurations compared to the simple array, whereby the field in adjacent cavities can be out of phase. Several types of compound slit arrays are investigated; one such structure is optimized to minimize the effect of boundary-layer loss mechanisms present in each slit cavity, thereby achieving a deep, sharp transmission minimum in a broad maximum.

  8. Pharmaceutical Compounding in Portuguese Community Pharmacies: CHARACTERIZATION AND FUTURE PERSPECTIVES.

    Palmeira-de-Oliveira, Rita; Macedo, Marina; Machado, Rita M; Pacheco, Ana Filipa; Palmeira-de-Oliveira, Ana; Martinez-de-Oliveira, José; Duarte, Paulo

    2016-01-01

    A study of compounding practices among Portuguese community pharmacies from 2008 to 2011 and pharmacists' perspectives concerning compounding was conducted. The retrospective study was based on an online questionnaire developed to gather information on pharmacies characteristics frequency, and type of compounded preparations. Additionally, difficulties, motivations, and pharmacist's perspectives regarding compounding were assessed. Up to 1,450 Portuguese pharmacies were contacted, and 250 completed questionnaires obtained. Statistical analysis was performed using SPSS Version 21. Frequency and cross-tab analysis was used to describe data. Chi-square test was used to assess statistical significant differences between compounding and non-compounding pharmacies' characteristics. Among all pharmacies, 75.2% reported compounding practices, although the majority prepared less than 50 preparations per year, corresponding to less than 10 different formulations. Those pharmacies' with a higher lifetime activity, number of customers, and team members were associated to compounding practices. Dermatological preparations were the most frequently prepared formulations, followed by oral solutions, and otorhinolaryngological preparations. Dermatologists and pediatricians were the most frequent prescribers of compounded medicines. Regarding future perspectives, 51.4% of pharmacists believed that compounding will decrease. However, 79.1% indicated that they will continue to compound, and 70.7% considered that compounded prescriptions should be encouraged. Patient satisfaction (66.1%) and improvement of the pharmacy image (63.8%) were considered the main advantages of compounding services. Compounded medicines are still prepared in the community pharmacy setting to fulfill special patients' therapeutic needs, especially following dermatologists' and pediatricians' prescriptions. Offering compounding services is perceived by pharmacists as an important factor for high

  9. Synthesis, Properties Characterization and Applications of Various Organobismuth Compounds

    Jingfei Luan

    2011-05-01

    Full Text Available Organobismuth chemistry was emphasized in this review article due to the low price, low toxicity and low radioactivity characteristics of bismuth. As an environmentally-friendly class of organometallic compounds, different types of organobismuth compounds have been used in organic synthesis, catalysis, materials, etc. The synthesis and property characterization of many organobismuth compounds had been summarized. This review article also presented a survey of various applications of organobismuth compounds in organic transformations, as reagents or catalysts. The reactivity, reaction pathways and mechanisms of reactions with organobismuths were discussed. Less common and limiting aspects of organobismuth compounds were also briefly mentioned.

  10. A New Cyano-compound from Rhodiola kirilowii

    YANG Lian-mei; HU Rong; FU Hong-zheng

    2011-01-01

    Objective To study the chemical constituents of Rhodiola kirilowii.Methods The compounds were separated and purified by various chromatographic techniques and their structures were elucidated on the basis of physicochemical properties and spectroscopic methods.Results Five compounds were purified and their structures were identified as 4-(β-D-glucopyranosyloxy)-3-hydroxy-2-(hydroxymethyl)-butanenitrfle (1),epicatechin (2),arbutin (3),rutin (4),and β-D-glucose (5).Conclusion Compound 1 is a new cyano-compound and other compounds are isolated from the plant for the first time.

  11. Materials Chemistry and Performance of Silicone-Based Replicating Compounds.

    Brumbach, Michael T.; Mirabal, Alex James; Kalan, Michael; Trujillo, Ana B; Hale, Kevin

    2014-11-01

    Replicating compounds are used to cast reproductions of surface features on a variety of materials. Replicas allow for quantitative measurements and recordkeeping on parts that may otherwise be difficult to measure or maintain. In this study, the chemistry and replicating capability of several replicating compounds was investigated. Additionally, the residue remaining on material surfaces upon removal of replicas was quantified. Cleaning practices were tested for several different replicating compounds. For all replicating compounds investigated, a thin silicone residue was left by the replica. For some compounds, additional inorganic species could be identified in the residue. Simple solvent cleaning could remove some residue.

  12. The III-Bi binary compounds

    Keen, Benjamin

    Bismuth containing III-V alloys such as GaAsBi, GaSbBi, InSbBi and InAsBi have recently become of great interest in the development of optical devices in the infrared spectrum. Difficulties in fabricating these materials stems, in part, from the lack of experimental data on the characteristics of the III-Bi family of compounds: AlBi, GaBi, and InBi. This thesis outlines the growth conditions and characteristics of the MBE deposition of InBi. To date, InBi remains the only one of the three compounds that has been experimentally reported, and the difficulties associated with the growth of AlBi and GaBi are also described herein. InBi thin films were grown on GaAs substrates at temperatures ranging from 50 °C to 100 °C. Unlike other III-V materials, which require a group V overpressure during deposition, to achieve stoichiometric quantities of indium and bismuth an In:Bi BEP ratio of 4:3 was found to be necessary. InBi samples were studied by a variety of measurement techniques, including SEM, EDX, XRD, HAXPES, and HRTEM. Films were found to grow in a 3-D Volmer-Weber mode, forming hemispherical droplets on the substrate surface. These droplets indicated clear signs of Ostwald ripening during growth, but maintained their distribution after deposition. InBi samples are believed to be semi-metallic, confirming some of the properties predicted by density functional theory (DFT) calculations. However, analysis of the crystal structure at the substrate/droplet interface indicates the epitaxial growth of InBi is in the zinc-blende configuration, instead of the PbO configuration, in direct opposition to predictions by DFT and experimental data reported from bulk crystal studies. Attempts to grow the other III-Bi materials, GaBi and AlBi, by MBE also resulted in 3-D droplet formation, but both gallium and aluminum failed to incorporate with bismuth to form a compound. Instead, the materials formed segregated regions in the droplets, clearly visible to SEM and EDX

  13. Trace compounds affecting biogas energy utilisation - A review

    Rasi, S., E-mail: saija.rasi@gmail.com [University of Jyvaeskylae, Department of Biological and Environmental Science, P.O. Box 35, FI-40014 (Finland); Laentelae, J.; Rintala, J. [University of Jyvaeskylae, Department of Biological and Environmental Science, P.O. Box 35, FI-40014 (Finland)

    2011-11-15

    Highlights: {yields} In regards to trace compounds, landfill gases are the most studied biogases. {yields} More strict requirements are set for biogas purity with new biogas applications. {yields} With traditional applications, small variations in biogas quality are acceptable. {yields} New requirements set challenges on raw material control and biogas quality. {yields} In this study, variations in analysing methods and biogas quality are discussed. - Abstract: This paper investigates the trace compounds affecting energy utilisation in biogas that come from different production sites. With biogas being more widely used in different energy applications more interest has arisen for the specific composition of biogas. In traditional energy applications, methane and hydrogen sulphide contents have had the most influence when energy utilisation application has been considered. With more advanced processes also the quantity and quality of trace compounds is more important. In regards to trace compounds, it was found that the concentrations and the variations of volatile organic compounds (VOCs) can be high in different landfills, especially, with compounds originating from the biological degradation process (like aromatics and terpenes) as seasonal variations affect the biological degradation. Trace compounds produced by direct volatilisation (halogenated and silicon compounds) show a smaller seasonal variation. Halogenated compounds are rarely present in high concentrations in waste water treatment plant (WWTP) biogas, but the concentrations of organic silicon compounds and their variation is high. Organic silicon compounds are usually detected only in low concentrations in co-digestion plant biogas, when no WWTP sludge is used as a raw material.

  14. Trace compounds affecting biogas energy utilisation - A review

    Highlights: → In regards to trace compounds, landfill gases are the most studied biogases. → More strict requirements are set for biogas purity with new biogas applications. → With traditional applications, small variations in biogas quality are acceptable. → New requirements set challenges on raw material control and biogas quality. → In this study, variations in analysing methods and biogas quality are discussed. - Abstract: This paper investigates the trace compounds affecting energy utilisation in biogas that come from different production sites. With biogas being more widely used in different energy applications more interest has arisen for the specific composition of biogas. In traditional energy applications, methane and hydrogen sulphide contents have had the most influence when energy utilisation application has been considered. With more advanced processes also the quantity and quality of trace compounds is more important. In regards to trace compounds, it was found that the concentrations and the variations of volatile organic compounds (VOCs) can be high in different landfills, especially, with compounds originating from the biological degradation process (like aromatics and terpenes) as seasonal variations affect the biological degradation. Trace compounds produced by direct volatilisation (halogenated and silicon compounds) show a smaller seasonal variation. Halogenated compounds are rarely present in high concentrations in waste water treatment plant (WWTP) biogas, but the concentrations of organic silicon compounds and their variation is high. Organic silicon compounds are usually detected only in low concentrations in co-digestion plant biogas, when no WWTP sludge is used as a raw material.

  15. Health promoting and sensory properties of phenolic compounds in food

    Lívia de Lacerda de Oliveira

    2014-12-01

    Full Text Available Phenolic compounds have been extensively studied in recent years. The presence of these compounds in various foods has been associated with sensory and health promoting properties. These products from the secondary metabolism of plants act as defense mechanisms against environmental stress and attack by other organisms. They are divided into different classes according to their chemical structures. The objective of this study was to describe the different classes of phenolic compounds, the main food sources and factors of variation, besides methods for the identification and quantification commonly used to analyze these compounds. Moreover, the role of phenolic compounds in scavenging oxidative stress and the techniques of in vitro antioxidant evaluation are discussed. In vivo studies to evaluate the biological effects of these compounds and their impact on chronic disease prevention are presented as well. Finally, it was discussed the role of these compounds on the sensory quality of foods.

  16. Trichloromethyl compounds - natural background concentrations and fates within and

    Albers, Christian Nyrop; Hansen, Poul Erik; Jacobsen, Ole Stig

    2010-01-01

    atmospheric input of trichloromethyl compounds is found to be minor, with significant contributions for trichloroacetic acid (TCAA), only. In top soil, where the formation of the compounds is expected to occur, there is a clear positive relationship between chloroform and trichloroacetyl containing compounds...... occurrence and cycling of organic compounds with a trichloromethyl moiety in common. The study areas are temperate coniferous forests. Trichloromethyl compounds can be found in all compartments of the forests (groundwater, soil, vegetation and throughfall), but not all compounds in all compartments. The....... Other positive relations occur, which in combination with chlorination experiments performed in the laboratory, point to the fact that all the trichloromethyl compounds may be formed concurrently in the soil, and their subsequent fates then differ due to different physical, chemical and biological...

  17. Transport of defense compounds from source to sink

    Jørgensen, Morten Egevang; Nour-Eldin, Hussam Hassan; Halkier, Barbara Ann

    2015-01-01

    Plants synthesize a plethora of defense compounds crucial for their survival in a challenging and changing environment. Transport processes are important for shaping the distribution pattern of defense compounds, albeit focus hitherto has been mostly on their biosynthetic pathways. A recent ident...... distribution patterns and source-sink relations. We focus on lessons learned from glucosinolate transport that may apply to transport of other defense compounds and discuss future avenues in the emerging field of defense compound transport.......Plants synthesize a plethora of defense compounds crucial for their survival in a challenging and changing environment. Transport processes are important for shaping the distribution pattern of defense compounds, albeit focus hitherto has been mostly on their biosynthetic pathways. A recent...... identification of two glucosinolate transporters represents a breakthrough in our understanding of glucosinolate transport in Arabidopsis and has advanced knowledge in transport of defense compounds. In this review, we discuss the role of the glucosinolate transporters in establishing dynamic glucosinolate...

  18. Biochemical studies on certain biologically active nitrogenous compounds

    Certain biologically active nitrogenous compounds such as alkaloids are widely distributed in many wild and medicinal plants such as peganum harmala L. (Phycophyllaceae). However, less literature cited on the natural compounds was extracted from the aerial parts of this plant; therefore this study was conducted on harmal leaves using several solvents. Data indicated that methanol extract was the inhibitoriest effect against some pathogenic bacteria, particularly Streptococcus pyogenus. Chromatographic separation illustrated that presence of four compounds; the most active one was the third compound (3). Elementary analysis (C, H, N) revealed that the primary chemical structure of the active antibacterial compound (C3) was: C17 H21 N3 O7 S with molecular weight 411. Spectroscopic analysis proved that coninical structure was = 1- thioformyl, 8?- D glucoperanoside- Bis- 2, 3 dihydroisopyridino pyrrol. This new compound is represented as a noval ?- carboline alkaloid compound

  19. MORPHOLOGICAL ASPECTS OF ENGLISH ADJECTIVAL COMPOUNDS: CORPUS ANALYSIS

    Vladimir Ž. Jovanović

    2005-12-01

    Full Text Available The paper considers the main formal characteristics of English compound words in adjectival sentence positions, systematized and based on language corpus analysis. The analysis of the compounds along the lines of their composite form, the constituent elements of these words, their interrelationships and other features is accompanied by numerous contextualized examples. The paper provides a statistical confirmation of the fact that compound adjectives make the most prominent group of adjectival compounds (65%, as well as it makes a statement about certain important orthographic implications. Further on, the typical English adjectival compound wouldbe the one with a noun as the first and past participle as the second element of the compound. On the basis of the research conducted here, it can be also concluded that the presence of inflectional morphemes in adjectival compounds is semantically conditioned, and that derivatives only infrequently serve as elements of compoundadjectivals.

  20. Characterization of Titanium-Containing Compounds in Gray Iron

    ZENG Daxin; ZHANG Yuanhao; LIU Jianyong; HE Hanjun; HONG Xiaoxian

    2008-01-01

    Titanium produces different compounds in gray iron. In order to determine their characteristics, a scanning electron microscope, an energy dispersive X-ray spectroscopy, and an optical microscopy were used to analyze the morphology, distribution, and composition of titanium-containing compounds in metal-lographic specimens and machined surfaces in four gray irons. The results show that the titanium-containing compounds in the gray irons are complex compounds containing V, Nb, Mn, S, and other metals, depending on the concentration of these elements in the iron. The number of titanium-containing compounds increases with increasing Ti content in the gray iron. Most of the titanium-containing compounds are located in the peariite matrix, with some in the steadite and carbides. The results suggest that titanium-containing com-pounds reduce tool lifetime.

  1. Reflection asymmetry in odd-A and odd-odd actinium nuclei

    Theoretical calculations and measurements indicate that octupole correlations are at a maximum in the ground states of the odd-proton nuclei Ac and Pa. It has been expected that odd-odd nuclei should have even larger amount of octupole-octupole correlations. We have recently made measurements on the structure of 224Ac. Although spin and parity assignments could not be made, two bands starting at 354.1 and 360.0 keV have properties characteristic of reflection asymmetric shape. These two bands have very similar rotational constants and also similar alpha decay rates, which suggest similarity between the wavefunctions of these bands. These signatures provide evidence for octupole correlations in these nuclides

  2. Bestimmung der Ionisationsenergie von Actinium und Ultraspurenanalyse von Plutonium mit resonanter Ionisationsmassenspektrometrie (RIMS)

    Waldek, Achim Marcus

    2001-01-01

    ZusammenfassungDie Resonanzionisationsmassenspektrometrie (RIMS) verbindet hohe Elementselektivität mit guter Nachweiseffizienz. Aufgrund dieser Eigenschaften ist die Methode für Ultraspurenanalyse und Untersuchungen an seltenen oder schwer handhabbaren Elementen gut geeignet. Für RIMS werden neutrale Atome mit monochromatischem Laserlicht ein- oder mehrfach resonant auf energetisch hoch liegende Niveaus angeregt und anschließend durch einen weiteren Laserstrahl oder durch ein elektrisches Fe...

  3. Radium-228 analysis of natural waters by Cherenkov counting of Actinium-228

    The activities of 228Ra in natural waters were determined by the Cherenkov counting of the daughter nuclide 228Ac. The radium was pre-concentrated on MnO2 and the radium purified via ion exchange and, after a 2-day period of incubation to allow for secular equilibrium between the parent-daughter 228Ra(228Ac), the daughter nuclide 228Ac was isolated by ion exchange according to the method of Nour et al. [2004. Radium-228 determination of natural waters via concentration on manganese dioxide and separation using Diphonix ion exchange resin. Appl. Radiat. Isot. 61, 1173-1178]. The Cherenkov photons produced by 228Ac were counted directly without the addition of any scintillation reagents. The optimum Cherenkov counting window, sample volume, and vial type were determined experimentally to achieve optimum Cherenkov photon detection efficiency and lowest background count rates. An optimum detection efficiency of 10.9±0.1% was measured for 228Ac by Cherenkov counting with a very low Cherenkov photon background of 0.317±0.013 cpm. The addition of sodium salicylate into the sample counting vial at a concentration of 0.1 g/mL yielded a more than 3-fold increase in the Cherenkov detection efficiency of 228Ac to 38%. Tests of the Cherenkov counting technique were conducted with several water standards of known activity and the results obtained compared closely with a conventional liquid scintillation counting technique. The advantages and disadvantages of Cherenkov counting compared to liquid scintillation counting methods are discussed. Advantages include much lower Cherenkov background count rates and consequently lower minimal detectable activities for 228Ra and no need for expensive environmentally unfriendly liquid scintillation cocktails. The disadvantages of the Cherenkov counting method include the need to measure 228Ac Cherenkov photon detection efficiency and optimum Cherenkov counting volume, which are not at all required when liquid scintillation analysis is used

  4. Linear free energy relationship applied to trivalent cations with lanthanum and actinium oxide and hydroxide structure

    Linear free energy relationships for trivalent cations with crystalline M2O3 and, M(OH)3 phases of lanthanides and actinides were developed from known thermodynamic properties of the aqueous trivalent cations, modifying the Sverjensky and Molling equation. The linear free energy relationship for trivalent cations is as ΔGf,MvX0=aMvXΔGn,M3+0+bMvX+βMvXrM3+, where the coefficients aMvX, bMvX, and βMvX characterize a particular structural family of MvX, rM3+ is the ionic radius of M3+ cation, ΔGf,MvX0 is the standard Gibbs free energy of formation of MvX and ΔGn,M3+0 is the standard non-solvation free energy of the cation. The coefficients for the oxide family are: aMvX=0.2705, bMvX=-1984.75 (kJ/mol), and βMvX=197.24 (kJ/molnm). The coefficients for the hydroxide family are: aMvX=0.1587, bMvX=-1474.09 (kJ/mol), and βMvX=791.70 (kJ/molnm).

  5. Actinium: A RESTful Runtime Container for Scriptable Internet of Things Applications

    Kovatsch, Matthias; Lanter, Martin; Duquennoy, Simon

    2012-01-01

    Programming Internet of Things (IoT) applications is challenging because developers have to be knowledgeable in various technical domains, from low-power networking, over embedded operating systems, to distributed algorithms. Hence, it will be challenging to find enough experts to provide software for the vast number of expected devices, which must also be scalable and particularly safe due to the connection to the physical world. To remedy this situation, we propose an architecture that pr...

  6. New method for large scale production of medically applicable Actinium-225 and Radium-223

    Alpha-emitters (211At, 212Bi, 213Bi, 223Ra, 225Ac) are promising for targeted radiotherapy of cancer. Only two alpha decays near a cell membrane result in 50% death of cancer cell and only a single decay inside the cell is required for this. 225Ac may be used either directly or as a mother radionuclide in 213Bi isotope generator. Production of 225Ac is provided by three main suppliers - Institute for Transuranium Elements in Germany, Oak Ridge National Laboratory in USA and Institute of Physics and Power Engineering in Obninsk, Russia. The current worldwide production of 225Ac is approximately 1.7 Ci per year that corresponds to only 100-200 patients that could be treated annually. The common approach for 225Ac production is separation from mother 229Th or irradiation of 226Ra with protons in a cyclotron. Both the methods have some practical limitations to be applied routinely. 225Ac can be also produced by irradiation of natural thorium with medium energy protons . Cumulative cross sections of 225Ac, 227Ac, 227Th, 228Th formations have been obtained recently. Thorium targets (1-9 g) were irradiated by 114-91 MeV proton beam (1-50 μA) at INR linear accelerator. After dissolution in 8 M HNO3 + 0.004 M HF thorium was removed by double LLX by HDEHP in toluene (1:1). Ac and REE were pre-concentrated and separated from Ra and most fission products by DGA-Resin (Triskem). After washing out by 0.01 M HNO3 Ac was separated from REE by TRU Resin (Triskem) in 3 M HNO3 media. About 6 mCi 225Ac were separated in hot cell with chemical yield 85%. The method may be upscaled for production of Ci amounts of the radionuclide. The main impurity is 227Ac (0.1% at the EOB) but it does not hinder 225Ac from being used for medical 225Ac/213Bi generators. (author)

  7. Synthesis of chelating agents for actinium 225 complexation and its application in radioimmunotherapy

    Immunotherapy with radiolabeled antibodies should allow fairly specific targeting of certain cancers. However, iodine 131 may not be the best isotope for tumor therapy because of its limited specific activity, low beta-energy, relatively long half life and strong gamma emission. Another approach to improve therapeutic efficacy is the use of replacement isotopes with better physical properties. Chelator that can hold radio-metals with high stability under physiological conditions are essential to avoid excessive damage to non-target cells; Moreover, the development of new bifunctional chelating agents is essential for this purpose. Accordingly, our efforts have been directed, for several years, to the synthesis of original chelating agents likely to form stable complexes in vivo with the numerous potential candidates for such applications. Therefore, we have developed a new simple and efficient synthesis pathway of 2-(4-iso-thio-cyanate-benzyl)-1,4,7,10,13,16- hexa-aza-cyclo-hexadecane- 1,4,7,10,13,16-hexa-acetic acid, though functionalized on the cycle by a termination allowed coupling to an antibody or any other biological substance such as a hapten. (author)

  8. Purification of selenium from thorium, uranium, radium, actinium and potassium impurities for low background measurements

    A technique of selenium purification from 232Th, 238U, 226,228Ra, 227Ac and 40K was developed. This technique is simple to perform and employs a minimum number of highly pure reagents (bidistilled water, nitric acid). Operations carried out during purification (elution, evaporation) practically exclude losses of the target product (chemical yields of Se > 99%). A test purification of 100 g of selenium was carried out using this technique. The efficiency of this technique was confirmed by low background gamma spectrometry of the purified selenium sample. Distribution coefficients of Th, U, Ra and Ac on DOWEX 50W- x 8 cation-exchange resin at different concentrations of selenium and nitric acid were experimentally determinated. Instrumental neutron activation analysis of bidistilled water, deionized water and nitric acid was performed. (orig.)

  9. Purification of selenium from thorium, uranium, radium, actinium and potassium impurities for low background measurements

    Rakhimov, A.V. [Joint Institute for Nuclear Research (JINR), Dubna (Russian Federation); Uzbek Academy of Sciences, Tashkent (Uzbekistan). Inst. of Nuclear Physics (INP AS RUz); Warot, G. [CEA-CNRS, Modane (France). Laboratoire Souterrain de Modane (LSM); Karaivanov, D.V. [Joint Institute for Nuclear Research (JINR), Dubna (Russian Federation); Institute for Nuclear Research and Nuclear Energy (INRNE), Sofia (Bulgaria); Kochetov, O.I.; Lebedev, N.A.; Filosofov, D.V. [Joint Institute for Nuclear Research (JINR), Dubna (Russian Federation); Mukhamedshina, N.M.; Sadikov, I.I. [Uzbek Academy of Sciences, Tashkent (Uzbekistan). Inst. of Nuclear Physics (INP AS RUz)

    2013-07-01

    A technique of selenium purification from {sup 232}Th, {sup 238}U, {sup 226,228}Ra, {sup 227}Ac and {sup 40}K was developed. This technique is simple to perform and employs a minimum number of highly pure reagents (bidistilled water, nitric acid). Operations carried out during purification (elution, evaporation) practically exclude losses of the target product (chemical yields of Se > 99%). A test purification of 100 g of selenium was carried out using this technique. The efficiency of this technique was confirmed by low background gamma spectrometry of the purified selenium sample. Distribution coefficients of Th, U, Ra and Ac on DOWEX 50W- x 8 cation-exchange resin at different concentrations of selenium and nitric acid were experimentally determinated. Instrumental neutron activation analysis of bidistilled water, deionized water and nitric acid was performed. (orig.)

  10. Characteristics and production of compound powder articles

    Characteristics of production of compound powder articles have been studied. It is shown that parts made from powder can be joined when heating using the 'growth' effect of pressed parts during sintering due to austenite-carbide alloy introduction into composition of the insent. Joining of parts is very strong if the structure of the jouning zone is similar to that of the basic material. It is reached by formation of grains common to joined materials due to the boundary migration induced either by primary or secondary recrystallization. The production parameters, temperature, sintering time, amount of the introduced addition, are ascertained to affect the joining strength. Properties of sintered materials based on iron are studied as affected by the process of complex thermodiffusion alloying. Mechanical properties, corrosion and scale resistance are determined in sintered articles with diffusion coatings. Saturation with chromium, nickel and silicon is shown to increase essentially mechanical-and-physical properties of sintered articles. (author)

  11. Phase transitions and structures of methylammonium compounds

    The structures of CD3ND3Cl, CD3ND3I, CD3ND3BF4, (CD3ND3)2SnCl6, and CD3ND3SnBr3 crystals were studied with time-of-flight type high-resolution powder diffractometers using spallation pulsed neutron sources. The orientations of the CD3ND3 cations, including the positions of the D atoms, were determined at all the room temperature phases and at the low temperature phases of CD3ND3I and (CD3ND3)2SnCl6. The heat capacity experiments were also performed for both protonated and deuterated analogs of these compounds. From both structural and thermodynamic points of view, it was found that the transitions are mainly associated with the order-disorder change of the orientations of the CD3ND3 cations. (author)

  12. Phenolic compounds from Anaphalis aureo-punctata

    WU Yan-Qi; LOU Ning; LI Yu

    2003-01-01

    @@ From the ethanolic extract of the whole plant of Anaphalis aureo-punctata, a new acylated flavonoid glycoside 3-O-kaempferol-3-O-acetyl-6-O-(p-coumaroyl)-β-D-glucopyranoside (1), and five known phenolic compounds 3-O-kaempferol-6- O- ( p-coumaroyl )-β-D-glucopyranoside ( 2 ), kaempferol-3- O-β-D-glucopyranoside 3,6-(4′-hydroxystyryl)-4-methoxy-2-pyrone (4), 2H-pyran-2-one, 6-[ 2-( 4-(β-D-glucopyranosyloxy ) phenyl ) ethenyl ]-4-methoxy-( E ) (5) and 4-hydroxy-3-methoxycinnamic hexacosyl ester (6) were isolated. Their structures were established by spectral methods (UV, IR, MS, 1D, 2D-NMR). The flavonoid glycosides, 1, 2 and 3 showed markedly inhibited oxidative DNA strand breaks induced by Fenton reaction and NADH/PMS in a concentration-dependent manner.

  13. Multiple compound odontomas in mandible: A rarity

    Sanjeev Vaid

    2012-01-01

    Full Text Available Odontomas are benign odontogenic tumors composed of enamel, dentine, and cementum and pulp tissue. They are usually clinically asymptomatic, but often associated with tooth eruption disturbances. The present study reports an unusual case of eleven odontomas in the left lateral incisor-canine region of lower jaw. A 26 years old female presented to the department of orthodontics and dentofacial orthopedics in H.P. Govt. Dental College and Hospital Shimla for the treatment of misaligned teeth. Clinical examination revealed that the lower left lateral incisor was missing. Patient was advised for radiographs, which revealed a mixed radiopaque lesion associated to impacted lower left canine. The histological report in this case indicated a compound odontoma.

  14. Impacted permanent incisors associated with compound odontoma.

    Machado, Cintia de Vasconcellos; Knop, Luégya Amorin Henriques; da Rocha, Maria Celina Barreiros Siquara; Telles, Paloma Dias da Silva

    2015-01-01

    Odontomas are the most common odontogenic tumours of the maxillary bones, characterised by a slow growth and benign behaviour. They are usually small, asymptomatic and diagnosed after routine radiographic examination. The aim of this study was to report a case of a compound odontoma in the anterior maxilla of a 7-year-old girl, which was causing the impaction of the maxillary right central and lateral incisors, as well as the prolonged retention of the corresponding primary teeth. We also aimed to review the literature about these tumours, since they are not part of the dentist's day-to-day clinical practice. The clinical and radiographic features, the diagnosis and treatment of the case were discussed in this work. PMID:25583937

  15. PUNGENT AND COLOUR COMPOUNDS OF RED PEPPERS

    Çetin KADAKAL

    2001-03-01

    Full Text Available The capcaicinoid amount of red peppers from Solanacea family is used for the evaluation of quality and classification in many countries. Capsaicin is the major pungent principle (69 % of capsaicinoids. The others are dihidrocapsaicin (22 %, nordihidrocapsaicin (7 %, homocapsaicin (1 % and homodihidrocapsaicin (1 %. As in most foods, the carotenoids of red peppers are also important compounds. Carotenoids are typical colour pigments and some of them have vitamin A activity. Major carotenoids of ripe fruit of red peppers are capsanthin, capsorubin, ß-carotene and zeaxanthin. Capcaicinoid and carotenoid contents of red peppers grown in many different regions of the world, their properties and roles on the human health were given in this review.

  16. Theoretical investigation of compounds with triple bonds

    In this thesis, compounds with potential triple-bonding character involving the heavier main-group elements, Group 4 transition metals, and the actinides uranium and thorium were studied by using molecular quantum mechanics. The triple bonds are described in terms of the individual orbital contributions (σ, π parallel, and π perpendicular to), involving electron-sharing covalent or donor-acceptor interactions between the orbitals of two atoms or fragments. Energy decomposition, natural bond orbital, and atoms in molecules analyses were used for the bonding analysis of the triple bonds. The results of this thesis suggest that the triple-bonding character between the heavier elements of the periodic table is important and worth further study and exploration.

  17. Investigation of Gd compounds using synchrotron radiation

    The electronic structure of ferromagnetic compound GdTiGe has been investigated using element sensitive methods-X-ray absorption spectroscopy (XAS), X-ray magnetic circular dichroism (XMCD) and resonant inelastic X-ray scattering (RIXS). Additionally, another ferromagnet GdTiSi has been studied using XMCD. XMCD revealed a strong dichroic signal at Gd L2 and L3 edges, which can be related to polarisation of Gd 5d band. XAS at Ti L2,3 edges has exhibited a structure which appeared to be in general agreement with the LAPW calculations. RIXS spectra have shown some resonance features for photon energies close to Ti L2 and Gd M5 edges

  18. A Study of Polycarbonyl Compounds in Magnegases

    Aringazin, A K

    2001-01-01

    In this paper we study the structure and thermochemical properties of some new polycarbonyl compounds, with particular attention devoted to the study of (CO)$_n$ complexes, which are expected to be present in magnegases^TM. The latter are anomalous gases produced by Hadronic Reactors^TM of molecular type [2] (Patented and International Patents Pending) which expose atoms to the extremely intense electronmagnetic fields existing at atomic distances from electric arcs in such a way to create a toroidal distribution of the orbitals of individual atoms, whether isolated or part of a valence bond. Polarized atoms, dimers and molecules then attract each other via opposing magnetic polarities resulting into stable clusters which constitute a new chemical species called Santilli's magnecules [2]. Some of the numerous open problems in the study of this intriguing new chemical species are pointed out.

  19. AFFINITY OF LIGNIN PREPARATIONS TOWARDS GENOTOXIC COMPOUNDS

    Božena Košíková

    2009-02-01

    Full Text Available The carcinogenicity and mutagenicity of chemicals may be modulated by other chemicals, including those prepared by organic synthesis. Consid-ering the several drawbacks of synthetic compounds vis-a-vis the human organism, the lignin biomass component was examined for this purpose. The binding affinity of lignin samples prepared by chemical and biological modification of lignin products derived from chemical wood treatment towards for N-nitrosodiethylamine (NDA was examined. The protective role of the lignin samples against carcinogenesis was tested on a well-known model carcinogen, N-methyl-N´-nitro-N-nitrosoguanidine (MNNG. The observed ability of a series of lignin preparations to reduce alkylation damage of deoxyribonucleic acid (DNA on hamster cells in vitro could be explained by their affinity to bind N-nitrosoamines. The results indicate that lignin has potential to protect living organisms against damaging effects of different genotoxicants.

  20. Neuroprotective effects of some creatine derivative compounds

    L. Perasso

    2010-01-01

    Full Text Available Some derivatives more lipophylic than creatine, thus theoretically being capable to better cross the blood-brain barrier, were studied for their neuroprotective effect in mouse hippocampal slices. In mouse hippocampal slices we found that EM2 I is ineffective, EM"" weakly increased the latency to population spike disapperance during anoxia. Creatine, Creatine-MG-complex (acetate and Phosphocreatine-Mg-complex (acetate increased more effectively the latency to population spike disappearance during anoxia. Moreover, Phosphocreatine-Mg-complex (acetate significantly reduced neuronal hyperexcitability during anoxia, an effect that no other compound (including creatine itself showed. Summing up, EM2 I is not useful for brain protection, while EM22 and cgelates of both creatine and phosphocreatine di replicate some of the knownn protective effects of creatine. In addition, Phosphocreatine-Mg-complex (acetate also reduced neuronal hyperexcitability during anoxia.