Draft Automatic Data Acquisition System Plan
International Nuclear Information System (INIS)
1987-04-01
This Automatic Data Acquisition System (ADAS) Plan has been prepared in support of the requirement for detailed site characterization of the Deaf Smith County candidate repository site in salt, and describes the data acquisition system which will be used for unattended data collection from the geotechnical instrumentation installed at the site. Section 1.1 discusses the programmatic background to the plan, Section 1.2 presents the scope and purpose of the plan, and the organization of the document is given in Section 1.3. 31 refs., 34 figs., 8 tabs
National Ignition Facility project acquisition plan
International Nuclear Information System (INIS)
Callaghan, R.W.
1996-04-01
The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility (NIF) Project. The scope of the plan describes the procurement activities and acquisition strategy for the following phases of the NIF Project, each of which receives either plant and capital equipment (PACE) or other project cost (OPC) funds: Title 1 and 2 design and Title 3 engineering (PACE); Optics manufacturing facilitization and pilot production (OPC); Convention facility construction (PACE); Procurement, installation, and acceptance testing of equipment (PACE); and Start-up (OPC). Activities that are part of the base Inertial Confinement Fusion (ICF) Program are not included in this plan. The University of California (UC), operating Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory, and Lockheed-Martin, which operates Sandia National Laboratory (SNL) and the University of Rochester Laboratory for Laser Energetics (UR-LLE), will conduct the acquisition of needed products and services in support of their assigned responsibilities within the NIF Project structure in accordance with their prime contracts with the Department of Energy (DOE). LLNL, designated as the lead Laboratory, will have responsibility for all procurements required for construction, installation, activation, and startup of the NIF
48 CFR 873.105 - Acquisition planning.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Acquisition planning. 873.105 Section 873.105 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS DEPARTMENT... planning. (a) Acquisition planning is an indispensable component of the total acquisition process. (b) For...
National Ignition Facility project acquisition plan revision 1
International Nuclear Information System (INIS)
Clobes, A.R.
1996-01-01
The purpose of this National Ignition Facility Acquisition Plan is to describe the overall procurement strategy planned for the National Ignition Facility M Project. It was prepared for the NIP Prood Office by the NIF Procurement Manager
Acoustic window planning for ultrasound acquisition.
Göbl, Rüdiger; Virga, Salvatore; Rackerseder, Julia; Frisch, Benjamin; Navab, Nassir; Hennersperger, Christoph
2017-06-01
Autonomous robotic ultrasound has recently gained considerable interest, especially for collaborative applications. Existing methods for acquisition trajectory planning are solely based on geometrical considerations, such as the pose of the transducer with respect to the patient surface. This work aims at establishing acoustic window planning to enable autonomous ultrasound acquisitions of anatomies with restricted acoustic windows, such as the liver or the heart. We propose a fully automatic approach for the planning of acquisition trajectories, which only requires information about the target region as well as existing tomographic imaging data, such as X-ray computed tomography. The framework integrates both geometrical and physics-based constraints to estimate the best ultrasound acquisition trajectories with respect to the available acoustic windows. We evaluate the developed method using virtual planning scenarios based on real patient data as well as for real robotic ultrasound acquisitions on a tissue-mimicking phantom. The proposed method yields superior image quality in comparison with a naive planning approach, while maintaining the necessary coverage of the target. We demonstrate that by taking image formation properties into account acquisition planning methods can outperform naive plannings. Furthermore, we show the need for such planning techniques, since naive approaches are not sufficient as they do not take the expected image quality into account.
Crawler Acquisition and Testing Demonstration Project Management Plan
International Nuclear Information System (INIS)
DEFIGH-PRICE, C.
2000-01-01
If the crawler based retrieval system is selected, this project management plan identifies the path forward for acquiring a crawler/track pump waste retrieval system, and completing sufficient testing to support deploying the crawler for as part of a retrieval technology demonstration for Tank 241-C-104. In the balance of the document, these activities will be referred to as the Crawler Acquisition and Testing Demonstration. During recent Tri-Party Agreement negotiations, TPA milestones were proposed for a sludge/hard heel waste retrieval demonstration in tank C-104. Specifically one of the proposed milestones requires completion of a cold demonstration of sufficient scale to support final design and testing of the equipment (M-45-03G) by 6/30/2004. A crawler-based retrieval system was one of the two options evaluated during the pre-conceptual engineering for C-104 retrieval (RPP-6843 Rev. 0). The alternative technology procurement initiated by the Hanford Tanks Initiative (HTI) project, combined with the pre-conceptual engineering for C-104 retrieval provide an opportunity to achieve compliance with the proposed TPA milestone M-45-03H. This Crawler Acquisition and Testing Demonstration project management plan identifies the plans, organizational interfaces and responsibilities, management control systems, reporting systems, timeline and requirements for the acquisition and testing of the crawler based retrieval system. This project management plan is complimentary to and supportive of the Project Management Plan for Retrieval of C-104 (RPP-6557). This project management plan focuses on utilizing and completing the efforts initiated under the Hanford Tanks Initiative (HTI) to acquire and cold test a commercial crawler based retrieval system. The crawler-based retrieval system will be purchased on a schedule to support design of the waste retrieval from tank C-104 (project W-523) and to meet the requirement of proposed TPA milestone M-45-03H. This Crawler
Customer acquisition plan for a small-size entrepreneur
Puotiniemi, Tiia
2014-01-01
The aim of this thesis was to draw a customer acquisition plan and improve the marketing planning in the company. Therefore, the final result was the market research summary. Development of the marketing strategy planning was based on internal and external situation analyses. This thesis is concentrated on a small-size operator’s business and therefore the internet marketing was brought up with its profitable benefits and advantages. The thesis was written as an auxiliary guide to build u...
Plans should abstractly describe intended behavior
Energy Technology Data Exchange (ETDEWEB)
Pfleger, K.; Hayes-Roth, B. [Stanford Univ., CA (United States)
1996-12-31
Planning is the process of formulating a potential course of action. How courses of action (plans) produced by a planning module are represented and how they are used by execution-oriented modules of a complex agent to influence or dictate behavior are critical architectural issues. In contrast to the traditional model of plans as executable programs that dictate precise behaviors, we claim that autonomous agents inhabiting dynamic, unpredictable environments can make better use of plans that only abstractly describe their intended behavior. Such plans only influence or constrain behavior, rather than dictating it. This idea has been discussed in a variety of contexts, but it is seldom incorporated into working complex agents. Experiments involving instantiations of our Adaptive Intelligent Systems architecture in a variety of domains have demonstrated the generality and usefulness of the approach, even with our currently simple plan representation and mechanisms for plan following. The behavioral benefits include (1) robust improvisation of goal-directed behavior in response to dynamic situations, (2) ready exploitation of dynamically acquired knowledge or behavioral capabilities, and (3) adaptation based on dynamic aspects of coordinating diverse behaviors to achieve multiple goals. In addition to these run-time advantages, the approach has useful implications for the design and configuration of agents. Indeed, the core ideas of the approach are natural extensions of fundamental ideas in software engineering.
International Nuclear Information System (INIS)
WHITE, D.A.
1999-01-01
This Software Configuration Management Plan (SCMP) provides the instructions for change control of the AZ1101 Mixer Pump Demonstration Data Acquisition System (DAS) and the Sludge Mobilization Cart (Gamma Cart) Data Acquisition and Control System (DACS)
48 CFR 7.105 - Contents of written acquisition plans.
2010-10-01
..., business, management, and other significant considerations that will control the acquisition. The specific... conditions affecting the acquisition, such as (i) requirements for compatibility with existing or future... appropriate, discuss the cost model used to develop life-cycle-cost estimates. (ii) Design-to-cost. Describe...
Equipment acquisition plans for the SSCL magnet excitation power system
International Nuclear Information System (INIS)
Winje, R.
1993-05-01
This report gives a brief description of the major electrical technical equipment used in the Superconducting Super Collider accelerators systems and the present laboratory plans for the acquisition of the equipment
Crowdsourcing as a Tool for Knowledge Acquisition in Spatial Planning
Directory of Open Access Journals (Sweden)
Chrysaida-Aliki Papadopoulou
2014-03-01
Full Text Available The term “crowdsourcing” was initially introduced by Howe in his article “The Rise of Crowdsourcing” [1]. During the last few years, crowdsourcing has become popular among companies, institutions and universities, as a crowd-centered modern “tool” for problem solving. Crowdsourcing is mainly based on the idea of an open-call publication of a problem, requesting the response of the crowd for reaching the most appropriate solution. The focus of this paper is on the role of crowdsourcing in knowledge acquisition for planning applications. The first part provides an introduction to the origins of crowdsourcing in knowledge generation. The second part elaborates on the concept of crowdsourcing, while some indicative platforms supporting the development of crowdsourcing applications are also described. The third part focuses on the integration of crowdsourcing with certain web technologies and GIS (Geographic Information Systems, for spatial planning applications, while in the fourth part, a general framework of the rationale behind crowdsourcing applications is presented. Finally, the fifth part focuses on a range of case studies that adopted several crowdsourcing techniques.
Berkowitz, D A; Swan, M M
1993-01-01
Technology should be viewed as an integrating rather than a divisive element in hospital planning. In the past, technology decision-making responsibility has often been diffused throughout hospitals, but providers are beginning to take a more considered and coherent approach. The process of making decisions about technology has four key elements: assessment, planning, acquisition, and management. The most important aspect of the assessment phase is the formation of a technology advisory committee to review and evaluate requests for new and emerging technology; review capital budget requests for new and replacement technology; and set mission-based and strategic priorities for new, emerging, and replacement technologies. Technology planning allows hospitals to set long-term goals for technology acquisition. The process involves an audit of existing technologies, evaluation of other hospitals' technologies, and review of technology trends. A well-defined technology plan will, in turn, facilitate the acquisition and management process, allowing hospitals greater flexibility in negotiating costs and budgeting for training, spare parts, service, upgrades, and support. By pooling resources with other providers in their region, hospitals can further enhance the effectiveness of their use and acquisition of technology. Collaboration allows providers to share the risks of technologically volatile and intensive services and avoid costly duplication of equipment and facilities.
Tank farm instrumentation and data acquisition/management upgrade plan
International Nuclear Information System (INIS)
Scaief, C.C. III.
1994-01-01
This plan provides the strategy, implementation, and schedule for upgrading tank farm instrumentation, data acquisition and data management. The focus is on surveillance parameters to verify and maintain tank safety. The criteria do not necessarily constitute mandatory requirements but are based upon engineering judgement and best available information. Schedules reflect preliminary funding for FY95. For out years they are best engineering judgment
Large-scale demonstration test plan for digface data acquisition system
International Nuclear Information System (INIS)
Roybal, L.G.; Svoboda, J.M.
1994-11-01
Digface characterization promotes the use of online site characterization and monitoring during waste retrieval efforts, a need that arises from safety and efficiency considerations during the cleanup of a complex waste site. Information concerning conditions at the active digface can be used by operators as a basis for adjusting retrieval activities to reduce safety risks and to promote an efficient transition between retrieval and downstream operations. Most importantly, workers are given advance warning of upcoming dangerous conditions. In addition, detailed knowledge of digface conditions provides a basis for selecting tools and methods that avoid contamination spread and work stoppages. In FY-94, work began in support of a largescale demonstration coordinating the various facets of a prototype digface remediation operation including characterization, contaminant suppression, and cold waste retrieval. This test plan describes the activities that will be performed during the winter of FY-95 that are necessary to assess the performance of the data acquisition and display system in its initial integration with hardware developed in the Cooperative Telerobotic Retrieval (CTR) program. The six specific objectives of the test are determining system electrical noise, establishing a dynamic background signature of the gantry crane and associated equipment, determining the resolution of the overall system by scanning over known objects, reporting the general functionality of the overall data acquisition system, evaluating the laser topographic functionality, and monitoring the temperature control features of the electronic package
TMI-2 accident evaluation program sample acquisition and examination plan. Executive summary
International Nuclear Information System (INIS)
Russell, M.L.; McCardell, R.K.; Broughton, J.M.
1985-12-01
The purpose of the TMI-2 Accident Evaluation Program Sample Acquisition and Examination (TMI-2 AEP SA and E) program is to develop and implement a test and inspection plan that completes the current-condition characterization of (a) the TMI-2 equipment that may have been damaged by the core damage events and (b) the TMI-2 core fission product inventory. The characterization program includes both sample acquisitions and examinations and in-situ measurements. Fission product characterization involves locating the fission products as well as determining their chemical form and determining material association
48 CFR 307.104-70 - Acquisition strategy.
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Acquisition strategy. 307... AND ACQUISITION PLANNING ACQUISITION PLANNING Acquisition Planning 307.104-70 Acquisition strategy... designated by the HHS CIO, DASFMP, the CAO, or the cognizant HCA) shall prepare an acquisition strategy using...
LAMPF nuclear chemistry data acquisition system
International Nuclear Information System (INIS)
Giesler, G.C.
1983-01-01
The LAMPF Nuclear Chemistry Data Acquisition System (DAS) is designed to provide both real-time control of data acquisition and facilities for data processing for a large variety of users. It consists of a PDP-11/44 connected to a parallel CAMAC branch highway as well as to a large number of peripherals. The various types of radiation counters and spectrometers and their connections to the system will be described. Also discussed will be the various methods of connection considered and their advantages and disadvantages. The operation of the system from the standpoint of both hardware and software will be described as well as plans for the future
Radioisotope thermoelectric generator transportation system subsystem 143 software development plan
International Nuclear Information System (INIS)
King, D.A.
1994-01-01
This plan describes the activities to be performed and the controls to be applied to the process of specifying, developing, and qualifying the data acquisition software for the Radioisotope Thermoelectric Generator (RTG) Transportation System Subsystem 143 Instrumentation and Data Acquisition System (IDAS). This plan will serve as a software quality assurance plan, a verification and validation (V and V) plan, and a configuration management plan
Processes Asunder: Acquisition & Planning Misfits
2009-03-26
Establishing six Business Enterprise Priorities ( BEPs ) to focus the Department’s business transformation efforts, which now guide DoD investment decisions...three phases which look very much like Milestone A, B, and C of the previously existing Life Cycle Management Framework . With this obvious redundancy...February 2002). 30 6 Defense Acquisition University, “Integrated Defense Acquisition, Technology, & Logistics Life Cycle Management Framework , version 5.2
International Nuclear Information System (INIS)
LeVine, M.J.
1985-01-01
The data acquisition architecture planned for experiment E802 is described. A VAX 11/785 will be front-ended by a VME-based array of 68000-family microprocessors, which will be used as intelligent CAMAC crate controllers, event builders, and to augment the computing power of the VAX for on-line analysis of the data. 4 refs
An introduction to LAMPF data acquisition system introduce
International Nuclear Information System (INIS)
Fu Saihong
1993-01-01
LAMPF Data Acquisition Systems are divided into general DAQ system and advanced MEGA DAQ system. The construct and future plan of general system are described. The second stage trigger has been implemented at LAMPF using a commercially available workstation and VME interface. The implementation is described and measurements of data transfer speeds are presented
Farm Service Agency, Department of Agriculture — Planned States for 2017 NAIP acquisition and acquisition status layer (updated daily). Updates to the acquisition seasons may be made during the season to...
International Nuclear Information System (INIS)
Peerenboom, J.P.; Leser, C.C.; Ramsey, G.M.; Widing, M.A.
1995-04-01
In February 1975, the accidental puncture of an underground transfer line buried about 4 ft below the ground surface at the SNL installation in Livermore, California, resulted in the release of approximately 225.5 m 3 of No. 2 diesel fuel. This report describes the formal quality assurance plan that will be used for the data acquisition and management system developed to monitor a bioremediation pilot study by Argonne National Laboratory in association with Sandia National Laboratories. The data acquisition and management system will record the site data during the bioremediation effort and assist users in site analysis. The designs of the three major subsystems of this system are described in this report. Quality assurance criteria are defined for the management, performance, and assessment of the system. Finally, the roles and responsibilities for configuration management of this system are defined for the entire life cycle of the project
48 CFR 207.401 - Acquisition considerations.
2010-10-01
..., DEPARTMENT OF DEFENSE ACQUISITION PLANNING ACQUISITION PLANNING Equipment Lease or Purchase 207.401... prepare and provide the contracting officer with the justification supporting the decision to lease or purchase. ...
The data acquisition system for SLD
International Nuclear Information System (INIS)
Sherden, D.J.
1986-10-01
This paper describes the data acquisition system planned for the SLD detector, which is being constructed for use with the SLAC Linear Collider (SLC). Analog electronics, heavily incorporating hybrid and custom VLSI circuitry, is mounted on the detector itself. Extensive use is made of multiplexing through optical fibers to a FASTBUS readout system. The low repetition rate of the SLC allows a relatively simple software-based trigger. Hardware and software processors within the acquisition modules are used to reduce the large volume of data per event and to calibrate the electronics. A farm of microprocessors is used for full reconstruction of a sample of events prior to transmission to the host
Performance Confirmation Data Acquisition System
International Nuclear Information System (INIS)
D.W. Markman
2000-01-01
The purpose of this analysis is to identify and analyze concepts for the acquisition of data in support of the Performance Confirmation (PC) program at the potential subsurface nuclear waste repository at Yucca Mountain. The scope and primary objectives of this analysis are to: (1) Review the criteria for design as presented in the Performance Confirmation Data Acquisition/Monitoring System Description Document, by way of the Input Transmittal, Performance Confirmation Input Criteria (CRWMS M and O 1999c). (2) Identify and describe existing and potential new trends in data acquisition system software and hardware that would support the PC plan. The data acquisition software and hardware will support the field instruments and equipment that will be installed for the observation and perimeter drift borehole monitoring, and in-situ monitoring within the emplacement drifts. The exhaust air monitoring requirements will be supported by a data communication network interface with the ventilation monitoring system database. (3) Identify the concepts and features that a data acquisition system should have in order to support the PC process and its activities. (4) Based on PC monitoring needs and available technologies, further develop concepts of a potential data acquisition system network in support of the PC program and the Site Recommendation and License Application
Scandia Plan: Collecting Cooperation in the Nordic Countries.
Sanner, L. E.
This report describes the Scandiaplan, a plan for coordinating the acquisition of materials among several special and research libraries in Denmark, Finland, Norway, and Sweden. Elements covered include prerequisites for developing a cooperative acquisition program, the history of the Scandiaplan, technical and economic problems, goals of the…
Project Delivery Acquisition and Contracting Plan for the Tank Farm Contractor
International Nuclear Information System (INIS)
MERCADO, L.C.
2000-01-01
This document is a plan presenting the process, strategies and approaches for vendor contracting by the Tank Farm Contractor. The plan focuses on contracting structures, practices, methods, and desired approaches in contracting. The U.S. Department of Energy (DOE), Office of River Protection (ORP) has contracted with the CH2M HILL Hanford Group, Inc. (CHG), as the Tank Farm Contractor (TFC), to support vitrification of Hanford Site tank waste by the Privatization Contractor. During Waste Feed Delivery Phase 1, waste will be retrieved from certain double-shell tanks and delivered to the Privatization Contractor to meet contract feed delivery requirements. Near-term project goals include upgrading infrastructure systems; retrieving and delivering the waste; and accepting the waste packages for interim onsite storage and disposal. Project Delivery includes individual projects assigned to provide the infrastructure and systems responsible to provide engineering, design, procurement, installation/construction, and testing/turnover of systems for retrieval of waste from Hanford double-shell tanks. This plan sets the requirements for projects work scope, contracting practices, structures, methods, and performance measurements. The plan is designed to integrate Life-Cycle Projects acquisitions and provide a consistent contracting approach. This effort will serve as a step improvement in contract reform implementing commercial practices into DOE projects
105-N Basin sediment removal subcontract acquisition strategy plan
International Nuclear Information System (INIS)
Wilsey, D.J.
1997-01-01
The 105-N Basin Sediment Removal Subcontract Acquisition Strategy Plan provides a detailed set of actions to specify and procure services and equipment for removal of approximately 400 ft 3 (wet) of radioactive sediment. The plan outlines a cost-effective approach to remove this sediment safely and within an aggressive schedule. This 105-N Basin Sediment Removal Strategy Plan includes the following key elements: a current vendor survey of capabilities and interest in this type of work, confirming that qualified, competitive sources are available, and in the time frame required; a systematic review of the various options for sediment disposal in enough detail to exhaustively uncover pros and cons of each approach; use of a workshop approach to assess different ways to accomplish the work and ensure the disposal options considered are cost and schedule effective; integration of the complicated sampling and characterization process, which is essential to successful execution of the procurement scheme; review of the various subcontracting options to maximize the use of existing technology, existing equipment, and specialized expertise; detailed early planning and strategizing for early identification of problems that can be solved early before they become restraints or potential added costs; tailored design schedule to cover three alternate approaches so that sample characterization will not delay engineering preparation for disposal; support required from various organizations onsite as well as subcontractors, well in advance of the need for that support, improving availability of the proper personnel to support schedule and cost objectives; and provides the possible opportunity to process the sediment in the valve pit and pump pit through this same subcontractor's process
DEFF Research Database (Denmark)
Meglio, Olimpia; King, David R.; Risberg, Annette
2017-01-01
The advantage of speed is often invoked by academics and practitioners as an essential condition during post-acquisition integration, frequently without consideration of the impact earlier decisions have on acquisition speed. In this article, we examine the role speed plays in acquisitions across...... the acquisition process using research organized around characteristics that display complexity with respect to acquisition speed. We incorporate existing research with a process perspective of acquisitions in order to present trade-offs, and consider the influence of both stakeholders and the pre......-deal-completion context on acquisition speed, as well as the organization’s capabilities to facilitating that speed. Observed trade-offs suggest both that acquisition speed often requires longer planning time before an acquisition and that associated decisions require managerial judgement. A framework for improving...
Data acquisition system for SLD
International Nuclear Information System (INIS)
Sherden, D.J.
1985-05-01
This paper describes the data acquisition system planned for the SLD detector which is being constructed for use with the SLAC Linear Collider (SLC). An exclusively FASTBUS front-end system is used together with a VAX-based host system. While the volume of data transferred does not challenge the band-width capabilities of FASTBUS, extensive use is made of the parallel processing capabilities allowed by FASTBUS to reduce the data to a size which can be handled by the host system. The low repetition rate of the SLC allows a relatively simple software-based trigger. The principal components and overall architecture of the hardware and software are described
2011-04-30
Corporation. All rights reserved End Users Administrator/ Maintainer (A/M) Subject Matter Expert ( SME ) Trainer/ Instructor Manager, Evaluator, Supervisor... CMMI ) - Acquisition (AQ) © 2011 The MITRE Corporation. All rights reserved 13 CMMI -Development Incremental iterative development (planning & execution...objectives Constructing games highlighting particular aspects of proposed CCOD® acquisition, and conducting exercises with Subject Matter Experts ( SMEs
DEFF Research Database (Denmark)
Risberg, Annette
Introduction to the study of mergers and acquisitions. This book provides an understanding of the mergers and acquisitions process, how and why they occur, and also the broader implications for organizations. It presents issues including motives and planning, partner selection, integration......, employee experiences and communication. Mergers and acquisitions remain one of the most common forms of growth, yet they present considerable challenges for the companies and management involved. The effects on stakeholders, including shareholders, managers and employees, must be considered as well...... by editorial commentaries and reflects the important organizational and behavioural aspects which have often been ignored in the past. By providing this in-depth understanding of the mergers and acquisitions process, the reader understands not only how and why mergers and acquisitions occur, but also...
Planning applications in image analysis
Boddy, Mark; White, Jim; Goldman, Robert; Short, Nick, Jr.
1994-01-01
We describe two interim results from an ongoing effort to automate the acquisition, analysis, archiving, and distribution of satellite earth science data. Both results are applications of Artificial Intelligence planning research to the automatic generation of processing steps for image analysis tasks. First, we have constructed a linear conditional planner (CPed), used to generate conditional processing plans. Second, we have extended an existing hierarchical planning system to make use of durations, resources, and deadlines, thus supporting the automatic generation of processing steps in time and resource-constrained environments.
Energy Technology Data Exchange (ETDEWEB)
Walker, Amy, E-mail: aw554@uowmail.edu.au; Metcalfe, Peter [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522, Australia and Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); Liney, Gary [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522 (Australia); Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); South West Clinical School, University of New South Wales, Sydney, NSW 2170 (Australia); Holloway, Lois [Centre for Medical Radiation Physics, University of Wollongong, Wollongong, NSW 2522 (Australia); Liverpool and Macarthur Cancer Therapy Centres and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); South West Clinical School, University of New South Wales, Sydney, NSW 2170 (Australia); Institute of Medical Physics, School of Physics, University of Sydney, Sydney, NSW 2006 (Australia); Dowling, Jason; Rivest-Henault, David [Commonwealth Scientific and Industrial Research Organisation, Australian E-Health Research Centre, Herston, QLD 4029 (Australia)
2015-04-15
Purpose: Accurate geometry is required for radiotherapy treatment planning (RTP). When considering the use of magnetic resonance imaging (MRI) for RTP, geometric distortions observed in the acquired images should be considered. While scanner technology and vendor supplied correction algorithms provide some correction, large distortions are still present in images, even when considering considerably smaller scan lengths than those typically acquired with CT in conventional RTP. This study investigates MRI acquisition with a moving table compared with static scans for potential geometric benefits for RTP. Methods: A full field of view (FOV) phantom (diameter 500 mm; length 513 mm) was developed for measuring geometric distortions in MR images over volumes pertinent to RTP. The phantom consisted of layers of refined plastic within which vitamin E capsules were inserted. The phantom was scanned on CT to provide the geometric gold standard and on MRI, with differences in capsule location determining the distortion. MRI images were acquired with two techniques. For the first method, standard static table acquisitions were considered. Both 2D and 3D acquisition techniques were investigated. With the second technique, images were acquired with a moving table. The same sequence was acquired with a static table and then with table speeds of 1.1 mm/s and 2 mm/s. All of the MR images acquired were registered to the CT dataset using a deformable B-spline registration with the resulting deformation fields providing the distortion information for each acquisition. Results: MR images acquired with the moving table enabled imaging of the whole phantom length while images acquired with a static table were only able to image 50%–70% of the phantom length of 513 mm. Maximum distortion values were reduced across a larger volume when imaging with a moving table. Increased table speed resulted in a larger contribution of distortion from gradient nonlinearities in the through
17 CFR 229.508 - (Item 508) Plan of distribution.
2010-04-01
... business function of such underwriter(s) will be to sell the securities to be registered, or that the... acquisition, reorganization, readjustment or succession, describe briefly the general effect of the plan and...
32 CFR 644.7 - Acquisition lines.
2010-07-01
... HANDBOOK Project Planning Civil Works § 644.7 Acquisition lines. (a) Tentative acquisition lines. As..., in accordance with sound real estate practices. Accordingly, fringe tracts will not be acquired until...
Inductive acquisition of expert knowledge
Energy Technology Data Exchange (ETDEWEB)
Muggleton, S.H.
1986-01-01
Expert systems divide neatly into two categories: those in which (1) the expert decisions result in changes to some external environment (control systems), and (2) the expert decisions merely seek to describe the environment (classification systems). Both the explanation of computer-based reasoning and the bottleneck (Feigenbaum, 1979) of knowledge acquisition are major issues in expert-systems research. The author contributed to these areas of research in two ways: 1. He implemented an expert-system shell, the Mugol environment, which facilitates knowledge acquisition by inductive inference and provides automatic explanation of run-time reasoning on demand. RuleMaster, a commercial version of this environment, was used to advantage industrially in the construction and testing of two large classification systems. 2. He investigated a new techniques called 'sequence induction' that can be used in construction of control systems. Sequence induction is based on theoretical work in grammatical learning. He improved existing grammatical learning algorithms as well as suggesting and theoretically characterizing new ones. These algorithms were successfully applied to acquisition of knowledge for a diverse set of control systems, including inductive construction of robot plans and chess end-gam strategies.
48 CFR 47.202 - Presolicitation planning.
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Presolicitation planning. 47.202 Section 47.202 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT... Presolicitation planning. Contracting officers shall inform activities that plan to acquire transportation or...
International Nuclear Information System (INIS)
Clout, P.N.
1982-01-01
Data acquisition systems are discussed for molecular biology experiments using synchrotron radiation sources. The data acquisition system requirements are considered. The components of the solution are described including hardwired solutions and computer-based solutions. Finally, the considerations for the choice of the computer-based solution are outlined. (U.K.)
Light Duty Utility Arm Software Test Plan
International Nuclear Information System (INIS)
Kiebel, G.R.
1995-01-01
This plan describes how validation testing of the software will be implemented for the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). The purpose of LDUA software validation testing is to demonstrate and document that the LDUA software meets its software requirements specification
Waste Isolation Pilot Plant (WIPP) startup plan
International Nuclear Information System (INIS)
1988-03-01
To allow the Waste Isolation Pilot Plant (WIPP) to transition from a Major System Acquisition to an operating demonstration facility, the Acquisition Executive and the Energy System Acquisition Advisory Board (ESAAB) must concur in the facility's readiness to receive waste. This action, designated in DOE Order 4700.1 as Key Decision Four, concludes with the Chairman of the ESAAB issuing a Record of Decision. Since the meeting leading to the Record of Decision is scheduled for August 1988, plans must be made to ensure all activities contributing to that decision are completed in a clear and well-coordinated process. To support that effort, this Start-Up Plan was prepared to identify and track key events necessary to verify WIPP's readiness to receive waste; this provides a management/scheduling/tracking tool for the DOE WIPP Project Office (WPO) and a tracking mechanism for the DOE Albuquerque Operations Office (DOE-AL) and for DOE Headquarters (DOE-HQ); and describe the process to ensure readiness is documented by providing relevant data and reports to the cognizant decision makers. The methods by which these two purposes are achieved are discussed in further detail in the remainder of this plan
48 CFR 7.402 - Acquisition methods.
2010-10-01
... ACQUISITION PLANNING Equipment Lease or Purchase 7.402 Acquisition methods. (a) Purchase method. (1) Generally, the purchase method is appropriate if the equipment will be used beyond the point in time when cumulative leasing costs exceed the purchase costs. (2) Agencies should not rule out the purchase method of...
Acquisition system for the CLIC Module
Vilalte, Sebastien
2011-01-01
The status of R&D activities for CLIC module acquisition are discussed [1]. LAPP is involved in the design of the local CLIC module acquisition crate, described in the document Study of the CLIC Module Front-End Acquisition and Evaluation Electronics [2]. This acquisition system is a project based on a local crate, assigned to the CLIC module, including several mother boards. These motherboards are foreseen to hold mezzanines dedicated to the different subsystems. This system has to work in radiation environment. LAPP is involved in the development of Drive Beam stripline position monitors read-out, described in the document Drive Beam Stripline BPM Electronics and Acquisition [3]. LAPP also develops a generic acquisition mezzanine that allows to perform all-around acquisition and components tests for drive beam stripline BPM read-out.
Procedure for image acquisition and dose planning of prostate cancer with 3D-CRT in the MIRS 3.0
International Nuclear Information System (INIS)
Perez Velasquez, Reytel; Alvarez Zaldivar, Junior; Gonzalez Lopez, Nadia
2009-01-01
For over 30 years in the department of Radiotherapy of the Lenin Hospital has been making conventional radiotherapy. In the present work is presented the procedure for dosimetric planning of patients with prostate cancer with 3D-CRT in the MIRS RTPS 3.0. The work ranges from image acquisition in the TAC, its including quality control, the definition of organs at risk by medical radiation therapists to the data to be transferred to the treatment machine. With this procedure has been possible to establish guidelines for planning 3D-CRT treatments for other locations. (author)
Software quality assurance plan for PORFLOW-3D
International Nuclear Information System (INIS)
Maheras, S.J.
1993-03-01
This plan describes the steps taken by the Idaho National Engineering Laboratory Subsurface and Environmental Modeling Unit personnel to implement software quality assurance procedures for the PORFLOW-3D computer code. PORFLOW-3D was used to conduct radiological performance assessments at the Savannah River Site. software quality assurance procedures for PORFLOW-3D include software acquisition, installation, testing, operation, maintenance, and retirement. Configuration control and quality assurance procedures are also included or referenced in this plan
Image acquisition, transmission and assignment in 60Co container inspection system
International Nuclear Information System (INIS)
Wu Zhifang; Zhou Liye; Liu Ximing; Wang Liqiang
1999-01-01
The author describes the data acquisition mode and image reconstruction method in 60 Co container inspection system, analyzes the relationship between line pick period and geometry distortion, makes clear the demand to data transmitting rate. It discusses several data communication methods, draws up a plan for network, realizes automatic direction and reasonable assignment of data in the system, cooperation of multi-computer and parallel processing, thus greatly improves the systems inspection efficiency
Validating Acquisition IS Integration Readiness with Drills
DEFF Research Database (Denmark)
Wynne, Peter J.
2017-01-01
To companies, mergers and acquisitions are important strategic tools, yet they often fail to deliver their expected value. Studies have shown the integration of information systems is a significant roadblock to the realisation of acquisition benefits, and for an IT department to be ready......), to understand how an IT department can use them to validate their integration plans. The paper presents a case study of two drills used to validate an IT department’s readiness to carry out acquisition IS integration, and suggests seven acquisition IS integration drill characteristics others could utilise when...
15 CFR 921.13 - Management plan and environmental impact statement development.
2010-01-01
... simple options) to establish adequate long-term state control; an estimate of the fair market value of... simple property interest (e.g., conservation easement), fee simple property acquisition, or a combination..., including appropriate government enforcement agencies; (9) If applicable, a restoration plan describing...
2013-01-29
of modern portfolio and control theory . The reformulation allows for possible changes in estimated quantities (e.g., due to market shifts in... Portfolio Theory (MPT). Final Report: NPS award N00244-11-1-0003 5 Extending CEM and Markov: Agent-Based Modeling Approach Research conducted in the...integration and acquisition from a robust portfolio theory standpoint. Robust portfolio management methodologies have been widely used by financial
PMU Frequency Data Processing for A Planned Islanding Operation in Bornholm
DEFF Research Database (Denmark)
(PMU) system in Bornholm during the planned islanding operation first, as it has high time resolution and it is synchronized to Global Position System (GPS). However, there were some problems with the PMU system during the islanding period, which made the data not as complete as expected. This paper...... describes the problems and provides proposals for a data processing procedure to ensure that the improved frequency data are acceptable for statistics analysis. The proposed data processing procedure is described and evaluated. Furthermore, this paper provides a reference for future PMU data acquisition...... and processing. Individually, section I in the paper generally describes the background for islanding operation and the Bornholm system. Section II introduces the installed PMU measurement system, followed by section III, which describes the PMU original frequency data, the problems during the acquisition...
Evaluating mergers and acquisitions with a purchase investigation.
Grant, E A; Giniat, E J
1988-04-01
Mergers and acquisitions are risk transactions. Therefore, a well-planned and executed purchase investigation that considers financial, personnel, legal and risk management, third-party payer, and medical staff issues is imperative. Organizations that can successfully complete a purchase investigation will be able to make better informed, lower risk, financial decisions, and will have a competitive advantage in achieving strategic goals. This article is the third in a series on mergers and acquisitions. Other articles will include legal issues and capital planning.
Diagnostic planning in JT-60 project
International Nuclear Information System (INIS)
Matoba, Tohru; Suzuki, Yasuo; Funahashi, Akimasa; Itagaki, Tokiyoshi
1977-08-01
The diagnostic plans of JT-60 were made along with design of the main machine. Basic requirements of the diagnostic program are (1) multiple measurement of respective plasma parameters, (2) efficient usage of the discharge, (3) capable data acquisition system, (4) high reliability of the diagnostic equipments, and (5) systematic development of new diagnostic techniques. Dimensions of the diagnostic ports were determined in detailed design of the vacuum vessel, anticipating the possible diagnostic methods. The proposed diagnostic systems and the plans are shown in table and figures respectively. Problems in the diagnostics are also described. (auth.)
STUDENT PLANNING TIME IN ORAL TESTS
Institute of Scientific and Technical Information of China (English)
WangLei
2004-01-01
This paper describes the process of planning in an oral test situation. Since many researchers have studied the impact of pretask planning in the Second Language Acquisition (SLA) field and some have explored the same subject into the area of oral tests, the present study tries to make a tentative attempt to see what the test takers are actually doing in the planning time while taking an oral test. A questionnaire was designed with the effort to find out whether planning time results in an increased focus on form, particularly at the level of strategic attention to form.The result of the investigation tells us that restricted by the type of situation, test takers can only plan the framework of what they are going to say, which may differ to the results achieved by previous studies.
Mergers and acquisitions: new arrangements in health care. Part 1.
Grant, E A
1988-02-01
Mergers and acquisitions are assuming a more important role in the healthcare industry today. These transactions require various issues be considered, such as valuation, capital planning, and so forth. In this article, the first in a five-part series on mergers and acquisitions, the fundamental methods and techniques of valuation are discussed. Some of these valuation methods, including comparative market transactions and free cash flow, are explained and examples are used to help potential purchasers and sellers to determine an organization's true value. Other articles in this series will include legal issues, tax implications, purchase investigations, and capital planning for mergers and acquisitions.
2012-06-29
... market research/industry communication. In 2008, the Office of Management and Budget and Office of... unique or brand name specifications, and enhancing acquisition planning. In 2010, the Government... strategic defense capabilities, because of a shift to ``lowest price possible.'' Further, according to this...
Energy Technology Data Exchange (ETDEWEB)
None
2000-11-01
This Plan provides strategies and milestones to implement Executive Order 13101, Greening the Government Through Waste Prevention, Recycling, and Federal Acquisition, and to achieve the new Secretarial goals for 2005 and 2010. It serves as the principal Secretarial guidance to Department of Energy (DOE) Headquarters, Field Offices, and laboratory and contractor staff to improve sanitary waste prevention, recycling, and the purchase and use of recycled content and environmentally preferable products and services in the DOE.
Acquisition Path Analysis as a Collaborative Activity
International Nuclear Information System (INIS)
Nakao, A.; Grundule, R.; Gushchyn, K.; El Gebaly, A.; Higgy, R.; Tsvetkov, I.; Mandl, W.
2015-01-01
In the International Atomic Energy Agency, acquisition path analysis (APA) is indispensable to safeguards implementation. It is an integral part of both State evaluation process and the development of State level safeguards approaches, all performed through ongoing collaborative analysis of all available safeguards relevant information by State evaluation groups (SEG) with participation of other contributors, as required. To perform comprehensive State evaluation, to develop and revise State-level safeguards approaches, and to prepare annual implementation plans, the SEG in its collaborative analysis follows accepted safeguards methodology and guidance. In particular, the guide ''Performing Acquisition Path Analysis for the Development of a State-level Safeguards Approach for a State with a CSA'' is used. This guide identifies four major steps of the APA process: 1. Consolidating information about the State's past, present and planned nuclear fuel cycle-related capabilities and infrastructure; 2. Identifying and visually presenting technically plausible acquisition paths for the State; 3. Assessing acquisition path steps (State's technical capabilities and possible actions) along the identified acquisition paths; and 4. Assessing the time needed to accomplish each identified technically plausible acquisition path for the State. The paper reports on SEG members' and other contributors' experience with APA when following the above steps, including the identification of plausible acquisition pathways, estimation of time frames for all identified steps and determination of the time needed to accomplish each acquisition path. The difficulties that the SEG encountered during the process of performing the APA are also addressed. Feedback in the form of practical suggestions for improving the clarity of the acquisition path step assessment forms and a proposal for software support are also included. (author)
Casey, Frances E; Sonenstein, Freya L; Astone, Nan M; Pleck, Joseph H; Dariotis, Jacinda K; Marcell, Arik V
2016-01-01
The Centers for Disease Control and Prevention and Healthy People 2020 call for improvements in meeting men's reproductive health needs but little is known about the proportion of men in need. This study describes men aged 35 to 39 in need of family planning and preconception care, demographic correlates of these needs, and contraception use among men in need of family planning. Using data from Wave 4 (2008-2010) of the National Survey of Adolescent Males, men were classified in need of family planning and preconception care if they reported sex with a female in the last year and believed that they and their partner were fecund; the former included men who were neither intentionally pregnant nor intending future children and the latter included men intending future children. Men were classified as being in need of both if they reported multiple sex partners in the past year. About 40% of men aged 35 to 39 were in need of family planning and about 33% in need of preconception care with 12% in need of both. Current partner's age, current union type, and sexually transmitted infection health risk differentiated men in need of family planning and preconception care (all ps family planning reported none of the time current partner hormonal use (55%) or condom use (52%) during the past year. This study identified that many men in their mid-30s are in need of family planning or preconception care. © The Author(s) 2014.
Steam Generator Group Project. Progress report on data acquisition/statistical analysis
International Nuclear Information System (INIS)
Doctor, P.G.; Buchanan, J.A.; McIntyre, J.M.; Hof, P.J.; Ercanbrack, S.S.
1984-01-01
A major task of the Steam Generator Group Project (SGGP) is to establish the reliability of the eddy current inservice inspections of PWR steam generator tubing, by comparing the eddy current data to the actual physical condition of the tubes via destructive analyses. This report describes the plans for the computer systems needed to acquire, store and analyze the diverse data to be collected during the project. The real-time acquisition of the baseline eddy current inspection data will be handled using a specially designed data acquisition computer system based on a Digital Equipment Corporation (DEC) PDP-11/44. The data will be archived in digital form for use after the project is completed. Data base management and statistical analyses will be done on a DEC VAX-11/780. Color graphics will be heavily used to summarize the data and the results of the analyses. The report describes the data that will be taken during the project and the statistical methods that will be used to analyze the data. 7 figures, 2 tables
48 CFR 1602.170-9 - Health benefits plan.
2010-10-01
... EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL DEFINITIONS OF WORDS AND TERMS Definitions of FEHBP Terms 1602.170-9 Health benefits plan. Health benefits plan means a group insurance policy, contract... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Health benefits plan. 1602...
Vienhage, Paul; Barcomb, Heather; Marshall, Karel; Black, William A.; Coons, Amanda; Tran, Hien T.; Nguyen, Tien M.; Guillen, Andy T.; Yoh, James; Kizer, Justin; Rogers, Blake A.
2017-05-01
The paper describes the MATLAB (MathWorks) programs that were developed during the REU workshop1 to implement The Aerospace Corporation developed Unified Game-based Acquisition Framework and Advanced Game - based Mathematical Framework (UGAF-AGMF) and its associated War-Gaming Engine (WGE) models. Each game can be played from the perspectives of the Department of Defense Acquisition Authority (DAA) or of an individual contractor (KTR). The programs also implement Aerospace's optimum "Program and Technical Baseline (PTB) and associated acquisition" strategy that combines low Total Ownership Cost (TOC) with innovative designs while still meeting warfighter needs. The paper also describes the Bayesian Acquisition War-Gaming approach using Monte Carlo simulations, a numerical analysis technique to account for uncertainty in decision making, which simulate the PTB development and acquisition processes and will detail the procedure of the implementation and the interactions between the games.
Success and Failures of Acquisitions: A Case Study for a Chemical Company
Directory of Open Access Journals (Sweden)
Shainaaz MOOSA MUSTAFFA
2017-05-01
Full Text Available The purpose of this study was to perform a universal inspection of the processes adopted in acquisitions by concentrating on attributes which are speedily implemented in the industry. The approach to this research study was based on literature reviews to gain knowledge on the causes of failure and the factors attributed to the success of acquisitions in the case study concerning a chemical company. This method was applied to identify if the failures and successes researched are shown in the case study. The research study firstly looked at various approaches to acquisitions, namely, the pre-acquisition, post-acquisition and integration phases together with the motives for acquisitions. The study delves further into factors influencing the failures and successes of acquisitions. A notable body of research was consulted to focus on these factors. The research study highlights a framework incorporating the management of post-integration strategy concurrently with the people and the organisational goals. The key findings showed that the company lacked a formal integration plan, cultural integration, ad proper communication plans. This resulted in staff unrest and high attrition of staff from deal announcement date up to post integration, leading to high resistance from staff and poor people integration. The company did however achieve financial success through synergy realisation. This positive outcome could have been achieved quicker with the proper integration plans within the different phases of the acquisition. The knowledge attained from this study will hopefully add to the body of knowledge on acquisitions.
17 CFR 230.145 - Reclassification of securities, mergers, consolidations and acquisitions of assets.
2010-04-01
..., mergers, consolidations and acquisitions of assets. 230.145 Section 230.145 Commodity and Securities... § 230.145 Reclassification of securities, mergers, consolidations and acquisitions of assets.... A statutory merger or consolidation or similar plan or acquisition in which securities of such...
Design of gamma camera data acquisition system based on PCI9810
International Nuclear Information System (INIS)
Zhao Yuanyuan; Zhao Shujun; Liu Yang
2004-01-01
This paper describe the design of gamma camera's data acquisition system, which is based on PCI9810 data acquisition card of ADLink Technology Inc. The main function of PCI9810 and the program of data acquisition system are described. (authors)
Transportation Business Plan: strategy options document
International Nuclear Information System (INIS)
1984-10-01
This document provides the framework for development of a business plan for establishing and operating the transportation system necessary to support a repository. Section I contains introductory material and defines the plan in terms of policy basis, purpose, and scope of business activities. Section II discusses the evolving strategy that will direct the Department's business actions and describes various strategy options that are under consideration. Also discussed in Section II is a process for the systematic development and acquisition of the transportation system. This process is based on a phased development approach with business activities divided into four stages: system definition; engineering development and certification; cask fleet procurement and carrier negotiations; and transportation operations. 8 figures, 2 tables
International Nuclear Information System (INIS)
Truitt, R.W.
1994-08-01
The purpose of this effort is to upgrade the existing DACS-1 used for control and data acquisition in support of the hydrogen mitigation program for tank 101-SY. The planned upgrades will enhance the system capabilities to support additional mitigation projects and improve the system operability by implementing changes identified during operation of the system to date. Once the upgrades have been implemented, the DACS-1 system should operate as it did prior to the upgrade, but with greatly increased speed and capability. No retraining of Test Engineers will be required; the upgrade is designed to be transparent to those who operate it, with only a noticeable increase in the speed of the system. This work plan defines the tasks required for implementing the upgrade. It identifies deliverables, responsible organizations and individuals, interfaces, and schedule. This upgrade effort employs system engineering principles wherever applicable
A higher level language data acquisition system (III) - the user data acquisition program
International Nuclear Information System (INIS)
Finn, J.M.; Gulbranson, R.L.; Huang, T.L.
1983-01-01
The nuclear physics group at the University of Illinois has implemented a data acquisition system using modified versions of the Concurrent Pascal and Sequential Pascal languages. The user, a physicist, develops a data acquisition ''operating system'', written in these higher level languages, which is tailored to the planned experiment. The user must include only those system functions which are essential to the task, thus improving efficiency. The user program is constructed from simple modules, mainly consisting of Concurrent Pascal PROCESSes, MONITORs, and CLASSes together with appropriate data type definitions. Entire programs can be put together using ''cut and paste'' techniques. Planned enhancements include the automating of this process. Systems written for the Perkin-Elmer 3220 using this approach can easily exceed 2 kHz data rates for event by event handling; 20 kHz data rates have been achieved by the addition of buffers in the interrupt handling software. These rates have been achieved without the use of special-purpose hardware such as micro-programmed branch drivers. With the addition of such devices even higher data rates should be possible
Value Creation through ICT Integration in Merger & Acquisition Processes
DEFF Research Database (Denmark)
Holm Larsen, Michael
2005-01-01
As deals are becoming more complex, and as technology, and the people supporting it, are becoming key drivers of merger and acquisition processes, planning of information and communication technologies in early stages of the integration process is vital to the realization of benefits of an Merger...... & Acquisition process. This statement is substantiated through review of literature from academics as well as practitioners, and case exemplifications of the financial service organization, the Nordea Group. Keywords: ICT Integration, Mergers & Acquisitions, Nordea Group....
Data acquisition for experiments with multi-detector arrays
Indian Academy of Sciences (India)
Experiments with multi-detector arrays have special requirements and place higher demands on computer data acquisition systems. In this contribution we discuss data acquisition systems with special emphasis on multi-detector arrays and in particular we describe a new data acquisition system, AMPS which we have ...
Summary of DOD Acquisition Program Audit Coverage
National Research Council Canada - National Science Library
2001-01-01
This report will provide the DoD audit community with information to support their planning efforts and provide management with information on the extent of audit coverage of DoD acquisition programs...
Case study : power distribution PBR plans of National Grid USA
International Nuclear Information System (INIS)
Hill, T.
2001-01-01
This power point presentation described the progressive approach taken by the Northeastern United States towards electric power restructuring and performance based ratemaking (PBR) with reference to National Grid USA and the NEES tradition of pursuing regulatory matters. The catalyst for change was the NEES acquisition of EUA (and National Grid USA acquisition of NEES). Another catalyst for change was the desire to merge operating companies and consolidate rates. This paper described the settlement negotiations of the New England Process with reference to meeting the customer's desire for lower electricity prices and rate stability.The paper also described a multi-year PBR-based plan proposed for Niagara Mohawk which offers incentives for both cost efficiency and service quality. It was concluded that PBR is a sound basis for optimizing customer and shareholder benefits. It was emphasized that while PBR has universal application, detailed implementation must be sensitive to local issues and priorities. tabs., figs
International Nuclear Information System (INIS)
McClees, J.; Truitt, R.W.
1994-01-01
The purpose of this effort is to transfer operating and maintenance responsibility for the 241-SY-101 data acquisition and control system (DACS-1) from Los Alamos National Laboratory to Westinghouse Hanford Company. This work plan defines the tasks required for a successful turnover. It identifies DACS-1 transition, deliverables, responsible organizations and individuals, interfaces, cost, and schedule. The transition plan will discuss all required hardware, software, documentation, maintenance, operations, and training for use at Hanford Waste Tank 241-SY-101. The transfer of responsibilities for DACS-1 to WHC is contingent on final approval of applicable Acceptance for Beneficial Use documentation by Waste Tank Operations. The DACS-1 was designed to provide data monitoring, display, and storage for Tank 241-SY-101. The DACS-1 also provides alarm and control of all the hydrogen mitigation testing systems, as well as ancillary systems and equipment (HVAC, UPS, etc.) required to achieve safe and reliable operation of the testing systems in the tank
NNSA?s Computing Strategy, Acquisition Plan, and Basis for Computing Time Allocation
Energy Technology Data Exchange (ETDEWEB)
Nikkel, D J
2009-07-21
This report is in response to the Omnibus Appropriations Act, 2009 (H.R. 1105; Public Law 111-8) in its funding of the National Nuclear Security Administration's (NNSA) Advanced Simulation and Computing (ASC) Program. This bill called for a report on ASC's plans for computing and platform acquisition strategy in support of stockpile stewardship. Computer simulation is essential to the stewardship of the nation's nuclear stockpile. Annual certification of the country's stockpile systems, Significant Finding Investigations (SFIs), and execution of Life Extension Programs (LEPs) are dependent on simulations employing the advanced ASC tools developed over the past decade plus; indeed, without these tools, certification would not be possible without a return to nuclear testing. ASC is an integrated program involving investments in computer hardware (platforms and computing centers), software environments, integrated design codes and physical models for these codes, and validation methodologies. The significant progress ASC has made in the past derives from its focus on mission and from its strategy of balancing support across the key investment areas necessary for success. All these investment areas must be sustained for ASC to adequately support current stockpile stewardship mission needs and to meet ever more difficult challenges as the weapons continue to age or undergo refurbishment. The appropriations bill called for this report to address three specific issues, which are responded to briefly here but are expanded upon in the subsequent document: (1) Identify how computing capability at each of the labs will specifically contribute to stockpile stewardship goals, and on what basis computing time will be allocated to achieve the goal of a balanced program among the labs. (2) Explain the NNSA's acquisition strategy for capacity and capability of machines at each of the labs and how it will fit within the existing budget constraints. (3
Conference data acquisition process at CERN
CERN. Geneva
2002-01-01
Will describe the data acquisition process set up at CERN (and tools developed for this purpose) and propose a MaC capture module based on CERN's experience. Will also focus on the video acquisition and how we can improve it to produce better InDiCo analysis test videos.
Success Factors of the Companies Mergers and Acquisitions
Directory of Open Access Journals (Sweden)
Maria Sierpińska
2007-01-01
Full Text Available Mergers and acquisitions (MA are one of the most important phenomenons influencing dynamics of the world economy growth. At the same time, big number of acquisitions turns out to be unsuccessful which induces one to examine reasons for failures and factors having influence on success of MA. In the article an attempt to systematize researchers and specialists-practitioners opinions on factors that play a key role in acquisition success was made, as complexity of MA processes causes that only actions resulting from reliable analysis, that are afterwards well planned and carried out may bring results expected by the entities.
Acquisition (Purchasing of ERP Systems from Organizational Buying Behavior Perspective
Directory of Open Access Journals (Sweden)
Tariq Bhatti
2014-05-01
Full Text Available Enterprise Resource Planning (ERP systems are becoming a mature infrastructure in many organizations. Organizations purchase these systems to integrate, improve internal business processes, serve their customers better and fulfill their needs. The buying process of these systems is more complicated and it requires a lot more consideration as it can have long term effects and consequences for the organization as well as for its stakeholders. Acquisition (purchasing of ERP systems is a complex behavior for organizations and has a lot to consider, from motives all the way to goals being pursued. Buying organizations consider several components that make up its business entity: like vendors, consumers, competitors, and regulations (Harris, 2013. Importance and relevance should be given to each one of these components as they all play key essential roles in sales organizations and their success. Typical organizations treat the purchasing process as a problem solving situation and rely on consultants or sometimes miss out on systematic buying process and the success factors to be considered vary from technicality, price, risk aversion, reputation, all the way to ethical decisions and legal regulations (Bellizzi, 2009. This research paper describe the current acquisition processes, critical success factors literature and propose integrated ERP systems acquisition model for organizations interested in buying similar systems in future.
2010-10-01
... laws to subcontracts for the acquisition of commercial items. 212.504 Section 212.504 Federal... PLANNING ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items 212.504 Applicability of certain laws to subcontracts for the acquisition of commercial items. (a...
The Acquisition Experiences of Kazoil
DEFF Research Database (Denmark)
Minbaeva, Dana; Muratbekova-Touron, Maral
2016-01-01
This case describes two diverging post-acquisition experiences of KazOil, an oil drilling company in Kazakhstan, in the years after the dissolution of the Soviet Union. When the company was bought by the Canadian corporation Hydrocarbons Ltd in 1996, exposed to new human resource strategies...... among students that cultural distance is not the main determinant for the success of social integration mechanisms in post-acquisition situations. On the contrary, the relationship between integration instrument and integration success is also governed by contextual factors such as the attractiveness...... of the acquisition target or state of development of HRM in the target country....
Multi-user data acquisition environment
International Nuclear Information System (INIS)
Storch, N.A.
1983-01-01
The typical data acquisition environment involves data collection and monitoring by a single user. However, in order to support experiments on the Mars facility at Lawrence Livermore National Laboratory, we have had to create a multi-user data acquisition environment where any user can control the data acquisition and several users can monitor and analyze data being collected in real time. This paper describes how we accomplished this on an HP A600 computer. It focuses on the overall system description and user communication with the tasks within the system. Our current implementation is one phase of a long-term software development project
Acquisition of Scientific Literature in Developing Countries. 2: Malaysia.
Taib, Rosna
1989-01-01
Describes the acquisition of scientific literature by academic libraries in Malaysia. The discussion covers the impact of government policies, library acquisition policies, the selection process, acquisition of special materials, the role of gifts and exchanges, and problems with customs clearance and censorship. Progress in cooperative…
Using Options to Manage Dynamic Uncertainty in Acquisition Projects
National Research Council Canada - National Science Library
Ceylan, B. K; Ford, David N
2002-01-01
Uncertainty in acquisition projects and environments can degrade performance. Traditional project planning, management tools, and methods can effectively deal with uncertainties in relatively stable environments...
2010-10-01
..., DEPARTMENT OF DEFENSE ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items 212.570 Applicability of certain laws to contracts and... laws to contracts and subcontracts for the acquisition of commercially available off-the-shelf items...
Multi spectral scaling data acquisition system
International Nuclear Information System (INIS)
Behere, Anita; Patil, R.D.; Ghodgaonkar, M.D.; Gopalakrishnan, K.R.
1997-01-01
In nuclear spectroscopy applications, it is often desired to acquire data at high rate with high resolution. With the availability of low cost computers, it is possible to make a powerful data acquisition system with minimum hardware and software development, by designing a PC plug-in acquisition board. But in using the PC processor for data acquisition, the PC can not be used as a multitasking node. Keeping this in view, PC plug-in acquisition boards with on-board processor find tremendous applications. Transputer based data acquisition board has been designed which can be configured as a high count rate pulse height MCA or as a Multi Spectral Scaler. Multi Spectral Scaling (MSS) is a new technique, in which multiple spectra are acquired in small time frames and are then analyzed. This paper describes the details of this multi spectral scaling data acquisition system. 2 figs
Scandal and Tragedy Or Acquisition Lessons Relearned by the F-35 Program
2017-01-01
Extend decontamination tests O — GAO 05—Establish an executable program consistent with best practices and DoD poli - cy regarding knowledge-based...Crawley, E. F. (2012). Relieving joint pain : Planning government acquisition of complex common systems. Defense Acquisition Research Journal, 19
2010-10-01
... laws to executive agency contracts for the acquisition of commercial items. 212.503 Section 212.503... ACQUISITION PLANNING ACQUISITION OF COMMERCIAL ITEMS Applicability of Certain Laws to the Acquisition of Commercial Items 212.503 Applicability of certain laws to executive agency contracts for the acquisition of...
Data Acquisition and Real-Time Systems.
Lawrence, D. E., Ed.; Fenwick, P. M., Ed.
The first group of papers starts with a tutorial paper which surveys the methods used in data acquisition systems. Other papers in this group describe: (1) some problems involved in the computer acquisition of high-speed randomly-occurring data and the protection of this data from accidental corruption, (2) an input/output bus to allow an IBM…
1997-09-30
This Integrated Logistics Support Plan (ILSP) serves as the master logistics planning document that describes necessary logistic activities, assigns responsibility for those activities, and establishes a schedule for completion. It is one of the init...
MFTF plasma diagnostics data acquisition system
International Nuclear Information System (INIS)
Davis, G.E.; Coffield, F.E.
1979-01-01
The initial goal of the Data Acquisition System (DAS) is to control 11 instruments chosen as the startup diagnostic set and to collect, process, and display the data that these instruments produce. These instruments are described in a paper by Stan Thomas, et. al. entitled ''MFTF Plasma Diagnostics System.'' The DAS must be modular and flexible enough to allow upgrades in the quantity of data taken by an instrument, and also to allow new instruments to be added to the system. This is particularly necessary to support a research project where needs and requirements may change rapidly as a result of experimental findings. Typically, the startup configuration of the diagnostic instruments will contain only a fraction of the planned detectors, and produce approximately one half the data that the expanded version is designed to generate. Expansion of the system will occur in fiscal year 1982
Yakima Habitat Improvement Project Master Plan, Technical Report 2003.
Energy Technology Data Exchange (ETDEWEB)
Golder Associates, Inc.
2003-04-22
The Yakima Urban Growth Area (UGA) is a developing and growing urban area in south-central Washington. Despite increased development, the Yakima River and its tributaries within the UGA continue to support threatened populations of summer steelhead and bull trout as well as a variety of non-listed salmonid species. In order to provide for the maintenance and recovery of these species, while successfully planning for the continued growth and development within the UGA, the City of Yakima has undertaken the Yakima Habitat Improvement Project. The overall goal of the project is to maintain, preserve, and restore functioning fish and wildlife habitat within and immediately surrounding the Yakima UGA over the long term. Acquisition and protection of the fish and wildlife habitat associated with key properties in the UGA will prevent future subdivision along riparian corridors, reduce further degradation or removal of riparian habitat, and maintain or enhance the long term condition of aquatic habitat. By placing these properties in long-term protection, the threat of development from continued growth in the urban area will be removed. To most effectively implement the multi-year habitat acquisition and protection effort, the City has developed this Master Plan. The Master Plan provides the structure and guidance for future habitat acquisition and restoration activities to be performed within the Yakima Urban Area. The development of this Master Plan also supports several Reasonable and Prudent Alternatives (RPAs) of the NOAA Fisheries 2000 Biological Opinion (BiOp), as well as the Water Investment Action Agenda for the Yakima Basin, local planning efforts, and the Columbia Basin Fish and Wildlife Authority's 2000 Fish and Wildlife Program. This Master Plan also provides the framework for coordination of the Yakima Habitat Improvement Project with other fish and wildlife habitat acquisition and protection activities currently being implemented in the area. As a
An emotion-based view of acquisition integration capability
Q.N. Huy (Quy N.); T.H. Reus (Taco)
2011-01-01
markdownabstractWe propose an emotion-based view of acquisition integration capability by developing an inter-firm model that focuses on dealing constructively with emotions during various organizational identification processes following mergers and acquisitions. The model describes diverse types
EBT data acquisition and analysis system
International Nuclear Information System (INIS)
Burris, R.D.; Greenwood, D.E.; Stanton, J.S.; Geoffroy, K.A.
1980-10-01
This document describes the design and implementation of a data acquisition and analysis system for the EBT fusion experiment. The system includes data acquisition on five computers, automatic transmission of that data to a large, central data base, and a powerful data retrieval system. The system is flexible and easy to use, and it provides a fully documented record of the experiments
Technology support for military capability based acquisition
CSIR Research Space (South Africa)
Thaba, Mphahlela
2017-05-01
Full Text Available gap between capability planning and acquisition of product systems in the SANDF. (Thaba J et al, 2015). The need for decision support tools and technologies to assist capability planners to close this gap and make sound decisions has become more...
System Description for Tank 241-AZ-101 Waste Retrieval Data Acquisition System
International Nuclear Information System (INIS)
ROMERO, S.G.
2000-01-01
The proposed activity provides the description of the Data Acquisition System for Tank 241-AZ-101. This description is documented in HNF-5572, Tank 241-AZ-101 Waste Retrieval Data Acquisition System (DAS). This activity supports the planned mixer pump tests for Tank 241-AZ-101. Tank 241-AZ-101 has been selected for the first full-scale demonstration of a mixer pump system. The tank currently holds over 960,000 gallons of neutralized current acid waste, including approximately 12.7 inches of settling solids (sludge) at the bottom of the tank. As described in Addendum 4 of the FSAR (LMHC 2000a), two 300 HP mixer pumps with associated measurement and monitoring equipment have been installed in Tank 241-AZ-101. The purpose of the Tank 241-AZ-101 retrieval system Data Acquisition System (DAS) is to provide monitoring and data acquisition of key parameters in order to confirm the effectiveness of the mixer pumps utilized for suspending solids in the tank. The suspension of solids in Tank 241-AZ-101 is necessary for pretreatment of the neutralized current acid waste and eventual disposal as glass via the Hanford Waste Vitrification Plant. HNF-5572 provides a basic description of the Tank 241-AZ-101 retrieval system DAS, including the field instrumentation and application software. The DAS is provided to fulfill requirements for data collection and monitoring. This document is not an operations procedure or is it intended to describe the mixing operation. This USQ screening provides evaluation of HNF-5572 (Revision 1) including the changes as documented on ECN 654001. The changes include (1) add information on historical trending and data backup, (2) modify DAS I/O list in Appendix E to reflect actual conditions in the field, and (3) delete IP address in Appendix F per Lockheed Martin Services, Inc. request
Seismic data acquisition systems
International Nuclear Information System (INIS)
Kolvankar, V.G.; Nadre, V.N.; Rao, D.S.
1989-01-01
Details of seismic data acquisition systems developed at the Bhabha Atomic Research Centre, Bombay are reported. The seismic signals acquired belong to different signal bandwidths in the band from 0.02 Hz to 250 Hz. All these acquisition systems are built around a unique technique of recording multichannel data on to a single track of an audio tape and in digital form. Techniques of how these signals in different bands of frequencies were acquired and recorded are described. Method of detecting seismic signals and its performance is also discussed. Seismic signals acquired in different set-ups are illustrated. Time indexing systems for different set-ups and multichannel waveform display systems which form essential part of the data acquisition systems are also discussed. (author). 13 refs., 6 figs., 1 tab
An Overview of Advanced Data Acquisition System (ADAS)
Mata, Carlos T.; Steinrock, T. (Technical Monitor)
2001-01-01
The paper discusses the following: 1. Historical background. 2. What is ADAS? 3. R and D status. 4. Reliability/cost examples (1, 2, and 3). 5. What's new? 6. Technical advantages. 7. NASA relevance. 8. NASA plans/options. 9. Remaining R and D. 10. Applications. 11. Product benefits. 11. Commercial advantages. 12. intellectual property. Aerospace industry requires highly reliable data acquisition systems. Traditional Acquisition systems employ end-to-end hardware and software redundancy. Typically, redundancy adds weight, cost, power consumption, and complexity.
The data acquisition system for the JADE detector
International Nuclear Information System (INIS)
Cords, D.; Dittmann, P.; Eichler, R.; Mills, H.E.
1985-07-01
An outline of the data acquisition system for the JADE experiment at PETRA, DESY is presented. After describing the hardware configuration, we describe our guiding ideas for the design of the data acquisition system, which is followed by accounts of the implementation of real time software, the data flow, the monitoring and detector control as well as the online event analysis and filtering. Finally we summarise our experience with the system. (orig.)
Optimizing Federal Fleet Vehicle Acquisitions: An Eleven-Agency FY 2012 Analysis
Energy Technology Data Exchange (ETDEWEB)
Singer, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Daley, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2015-02-01
This report focuses on the National Renewable Energy Laboratory's (NREL) fiscal year (FY) 2012 effort that used the NREL Optimal Vehicle Acquisition (NOVA) analysis to identify optimal vehicle acquisition recommendations for eleven diverse federal agencies. Results of the study show that by following a vehicle acquisition plan that maximizes the reduction in greenhouse gas (GHG) emissions, significant progress is also made toward the mandated complementary goals of acquiring alternative fuel vehicles, petroleum use reduction, and alternative fuel use increase.
DEFF Research Database (Denmark)
Sun, X.; Li, Y.; Govindan, Kannan
2013-01-01
As uncertainties increase in both the acquisition of used products and the demand of remanufactured products, balancing supply and demand has become more important for a remanufacturing firm. Therefore, the remanufacturing firm needs to combine acquisition management with remanufacturing planning...... level and acquisition price of each period, which holds a lower computational complexity. Finally, numerical examples are provided to show the effectiveness of the algorithm and to conduct managerial insights of main parameters....
Implementation of three dimensional treatment planning system for external radiotherapy
International Nuclear Information System (INIS)
Major, Tibor; Kurup, P.G.G.; Stumpf, Janos
1997-01-01
A three dimensional (3D) treatment planning system was installed at Apollo Cancer Hospital, Chennai, India in 1995. This paper gives a short description of the system including hardware components, calculation algorithm, measured data requirements and specific three dimensional features. The concept and the structure of the system are shortly described. The first impressions along with critical opinions and the experiences are gained during the data acquisition are mentioned. Some improvements in the user interface are suggested. It is emphasized that although a 3D system offers more detailed and accurate dose distributions compared to a 2D system, it also introduces a greatly increased workload for the planning staff. (author)
Disclosure requirements for merger and acquisition transactions
International Nuclear Information System (INIS)
Holm, D.I.
1998-01-01
The legal disclosure requirements for merger and acquisition transactions involving Canadian public companies are described. The focus is on issues regarding merger and acquisition related disclosure, including the potential consequences of failing to provide proper information, Ontario Securities Commission Policy 9.1 considerations regarding valuation, review, and approval, cross border considerations and financing a merger and acquisition transaction. Legal and practical consequences for failing to provide proper disclosure, including the steps involved in establishing the due diligence defence, are also discussed
Multi-channel data acquisition system for CT
International Nuclear Information System (INIS)
Cao Fuqiang; He Bin; Liu Guohua; Xu Minjian
2009-01-01
The architecture design and realization of a data acquisition system for multi-channel CT is described. The article introduces the conversion of analog signal to digital signal, the data cache and transmission. This data acquisition system can be widely used in the system which requires the multi-channel, weak current signal detection. (authors)
Application of PIMS Software in Monthly Planning of Refinery Production
Institute of Scientific and Technical Information of China (English)
无
2005-01-01
This article describes the application of the PIMS software in formulating monthly refining production plan. Application of the PIMS software can help to solve a series of problems related with monthly plan of refining production such as optimized selection of crude and feedstocks, optimized selection of production scale and processing scheme, identification of bottlenecks and their mitigation,optimized selection of turnaround time and optimized selection of operating regime, which have increased the economic benefits of refining enterprises. With the further development and improvement of models the PIMS software will play an increasingly important role in formulating monthly plans of refining operations and production management at refineries. This article also explores the problems existing in refinery monthly planning, and has made recommendations on developing and improving models and reporting system, enhancement of basic data acquisition, model maintenance personnel and staff training.
Strategic Planning and Management in Defense Systems Acquisition
2014-04-30
Program analysis /assessment Needs assessment Mission/strategy mapping SWOT analyses Root cause analyses Balanced Scorecard Stakeholder...Strategic planning, according to Dr. John Bryson (2010), offers many benefits to public-sector organizations: Promotes strategic thinking, acting, and...and Benefits people directly involved. Bryson (2010), a strategic planning researcher from the University of Minnesota, states, “Evidence
Forrest Ranch Acquisition, Annual Report 2001-2002.
Energy Technology Data Exchange (ETDEWEB)
Smith, Brent
2003-08-01
Through their John Day Basin Office, the Confederated Tribes of Warm Springs Reservation of Oregon (Tribes) acquired the Forrest Ranch during July of 2002. The property consists of two parcels located in the John Day subbasin within the Columbia basin. The mainstem parcel consists of 3,503 acres and is located 1/2 mile to the east of Prairie City, Oregon on the mainstem of the John Day River. The middle fork parcel consists of 820 acres and is located one mile to the west of the town of Austin, OR on the middle fork John Day River. The Forrest Ranch Project is under a memorandum of agreement with the Bonneville Power Administration (BPA) to provide an annual written report generally describing the real property interests of the project and management activities undertaken or in progress. The Forrest Ranch acquisition was funded by BPA as part of their program to protect, mitigate, and enhance fish and wildlife habitat affected by the operation of their hydroelectric facilities on the Columbia River and its tributaries. Following lengthy negotiations with the BPA and property owner, the Tribes were able to conclude the acquisition of the Forrest Ranch in July of 2002. The intent of the acquisition project was to partially mitigate fish and wildlife impacts for the John Day Dam on the Columbia River as outlined in the Northwest Power Planning Council's Wildlife Program (NPPC 1994, section 11.1, section 7.6). While the Tribes hold fee-title to the property, the BPA has assured a level of program funding through a memorandum of agreement and annual statement of work. As early as 1997, the Tribes identified this property as a priority for restoration in the John Day basin. In 2000, the Tribes arranged an agreement with the landowner to seek funds for the acquisition of both the Middle Fork and upper Mainstem John Day River holdings of Mr. John Forrest. This property had been a priority of not only the Tribes, but of many other basin natural resource agencies. The
2XIIB computer data acquisition system
International Nuclear Information System (INIS)
Tyler, G.C.
1975-01-01
All major plasma diagnostic measurements from the 2XIIB experiment are recorded, digitized, and stored by the computer data acquisition system. The raw data is then examined, correlated, reduced, and useful portions are quickly retrieved which direct the future conduct of the plasma experiment. This is done in real time and on line while the data is current. The immediate availability of this pertinent data has accelerated the rate at which the 2XII personnel have been able to gain knowledge in the study of plasma containment and fusion interaction. The up time of the experiment is being used much more effectively than ever before. This paper describes the hardware configuration of our data system in relation to various plasma parameters measured, the advantages of powerful software routines to reduce and correlate the data, the present plans for expansion of the system, and the problems we have had to overcome in certain areas to meet our original goals
Defense Contract Management Command Support to System Acquisition Program Managers
National Research Council Canada - National Science Library
1999-01-01
.... This report discusses the planning of contract administration office support to system acquisition program managers through the program integration process and the customer support outreach program...
Mission Planning System Increment 5 (MPS Inc 5)
2016-03-01
2016 Major Automated Information System Annual Report Mission Planning System Increment 5 (MPS Inc 5) Defense Acquisition Management Information...President’s Budget RDT&E - Research, Development, Test, and Evaluation SAE - Service Acquisition Executive TBD - To Be Determined TY - Then Year...Phone: 845-9625 DSN Fax: Date Assigned: May 19, 2014 Program Information Program Name Mission Planning System Increment 5 (MPS Inc 5) DoD
Mergers and acquisitions involving equine veterinary practices.
Jackman, Brad R; McCafferty, Owen E
2009-12-01
This article discusses mergers and acquisitions involving equine veterinary practices. Combining practices can be professionally and economically advantageous but requires a great deal of thought, planning, and implementation. If due diligence is performed and true business teamwork is undertaken, the benefits can be enormous and rewarding.
Design of the data acquisition and analysis system for RFX
International Nuclear Information System (INIS)
Flor, G.
1986-01-01
This paper describes the conceptual design of the data acquisition and analysis system for the RFX experiment. In order to adequately describe an intrinsically dynamic experiment, the concept of an experiment's model is introduced. The model is generated by means of a suitable experiment description language; the diagnostic system is represented as a tree structure and is described by defining all the data and devices involved in the data acquisition system. The resulting data structures drive the data acquisition process and can be used, with minor modifications, as data descriptions in the archiving system. The need of a generalized I/O system is envisaged and a way to implement it is outlined
Impact of Merger and Acquisition on University Performance.
Mohamadi Bolbanabad, Amjad; Mosadeghrad, Ali Mohammad; Arab, Mohammad; Majdzadeh, Reza
2017-08-01
Merger and acquisitions (M&A) widen access to higher education, improve quality of teaching and research, and increase efficiency of higher education institutions. Three big medical universities in Iran merged in 2010. The purpose of this study was to highlight the impact of this acquisition on the performance of Tehran University of Medical Sciences. This qualitative study was conducted using semi-structured in-depth interviews with 60 participants from April 2015 to November 2015. Purposeful sampling was used to recruit participants. Data analysis was performed using MAXQDA software (V. 10). The reasons for acquisition of IUMS by TUMS were to enhance the position of TUMS worldwide, and to increase its efficiency. The acquisition improved the organization and management of the newly formed TUMS, enhanced its academic position and market recognition. However, the achieved benefits did not come without shortcomings and unanticipated consequences. The merger and acquisition in higher education has some advantages and disadvantages. A well planned and carefully implemented M&A gives cutting edge to the higher education institutes.
International Nuclear Information System (INIS)
Rinne, C.A.; Curry, R.H.; Hagan, J.W.; Seiler, S.W.; Sommer, D.J.; Yancey, E.F.
1990-01-01
The Hanford Site Development Plan (Site Development Plan) is intended to guide the short- and long-range development and use of the Hanford Site. All acquisition, development, and permanent facility use at the Hanford Site will conform to the approved plan. The Site Development Plan also serves as the base document for all subsequent studies that involve use of facilities at the Site. This revision is an update of a previous plan. The executive summary presents the highlights of the five major topics covered in the Site Development Plan: general site information, existing conditions, planning analysis, Master Plan, and Five-Year Plan. 56 refs., 67 figs., 31 tabs
Energy Technology Data Exchange (ETDEWEB)
Rinne, C.A.; Curry, R.H.; Hagan, J.W.; Seiler, S.W.; Sommer, D.J. (Westinghouse Hanford Co., Richland, WA (USA)); Yancey, E.F. (Pacific Northwest Lab., Richland, WA (USA))
1990-01-01
The Hanford Site Development Plan (Site Development Plan) is intended to guide the short- and long-range development and use of the Hanford Site. All acquisition, development, and permanent facility use at the Hanford Site will conform to the approved plan. The Site Development Plan also serves as the base document for all subsequent studies that involve use of facilities at the Site. This revision is an update of a previous plan. The executive summary presents the highlights of the five major topics covered in the Site Development Plan: general site information, existing conditions, planning analysis, Master Plan, and Five-Year Plan. 56 refs., 67 figs., 31 tabs.
An agile acquisition decision-support workbench for evaluating ISR effectiveness
Stouch, Daniel W.; Champagne, Valerie; Mow, Christopher; Rosenberg, Brad; Serrin, Joshua
2011-06-01
The U.S. Air Force is consistently evolving to support current and future operations through the planning and execution of intelligence, surveillance and reconnaissance (ISR) missions. However, it is a challenge to maintain a precise awareness of current and emerging ISR capabilities to properly prepare for future conflicts. We present a decisionsupport tool for acquisition managers to empirically compare ISR capabilities and approaches to employing them, thereby enabling the DoD to acquire ISR platforms and sensors that provide the greatest return on investment. We have developed an analysis environment to perform modeling and simulation-based experiments to objectively compare alternatives. First, the analyst specifies an operational scenario for an area of operations by providing terrain and threat information; a set of nominated collections; sensor and platform capabilities; and processing, exploitation, and dissemination (PED) capacities. Next, the analyst selects and configures ISR collection strategies to generate collection plans. The analyst then defines customizable measures of effectiveness or performance to compute during the experiment. Finally, the analyst empirically compares the efficacy of each solution and generates concise reports to document their conclusions, providing traceable evidence for acquisition decisions. Our capability demonstrates the utility of using a workbench environment for analysts to design and run experiments. Crafting impartial metrics enables the acquisition manager to focus on evaluating solutions based on specific military needs. Finally, the metric and collection plan visualizations provide an intuitive understanding of the suitability of particular solutions. This facilitates a more agile acquisition strategy that handles rapidly changing technology in response to current military needs.
On the reproducibility of expert-operated and robotic ultrasound acquisitions.
Kojcev, Risto; Khakzar, Ashkan; Fuerst, Bernhard; Zettinig, Oliver; Fahkry, Carole; DeJong, Robert; Richmon, Jeremy; Taylor, Russell; Sinibaldi, Edoardo; Navab, Nassir
2017-06-01
We present the evaluation of the reproducibility of measurements performed using robotic ultrasound imaging in comparison with expert-operated sonography. Robotic imaging for interventional procedures may be a valuable contribution, but requires reproducibility for its acceptance in clinical routine. We study this by comparing repeated measurements based on robotic and expert-operated ultrasound imaging. Robotic ultrasound acquisition is performed in three steps under user guidance: First, the patient is observed using a 3D camera on the robot end effector, and the user selects the region of interest. This allows for automatic planning of the robot trajectory. Next, the robot executes a sweeping motion following the planned trajectory, during which the ultrasound images and tracking data are recorded. As the robot is compliant, deviations from the path are possible, for instance due to patient motion. Finally, the ultrasound slices are compounded to create a volume. Repeated acquisitions can be performed automatically by comparing the previous and current patient surface. After repeated image acquisitions, the measurements based on acquisitions performed by the robotic system and expert are compared. Within our case series, the expert measured the anterior-posterior, longitudinal, transversal lengths of both of the left and right thyroid lobes on each of the 4 healthy volunteers 3 times, providing 72 measurements. Subsequently, the same procedure was performed using the robotic system resulting in a cumulative total of 144 clinically relevant measurements. Our results clearly indicated that robotic ultrasound enables more repeatable measurements. A robotic ultrasound platform leads to more reproducible data, which is of crucial importance for planning and executing interventions.
48 CFR 1052.219-71 - Subcontracting Plan.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Subcontracting Plan. 1052... Subcontracting Plan. As prescribed in DTAR 1019.708-70(b), insert the following provision: Subcontracting Plan (MAR 2002) As part of its initial proposal, each large business offeror must submit a contracting plan...
The ALICE data acquisition system
Carena, F; Chapeland, S; Chibante Barroso, V; Costa, F; Dénes, E; Divià, R; Fuchs, U; Grigore, A; Kiss, T; Simonetti, G; Soós, C; Telesca, A; Vande Vyvre, P; Von Haller, B
2014-01-01
In this paper we describe the design, the construction, the commissioning and the operation of the Data Acquisition (DAQ) and Experiment Control Systems (ECS) of the ALICE experiment at the CERN Large Hadron Collider (LHC). The DAQ and the ECS are the systems used respectively for the acquisition of all physics data and for the overall control of the experiment. They are two computing systems made of hundreds of PCs and data storage units interconnected via two networks. The collection of experimental data from the detectors is performed by several hundreds of high-speed optical links. We describe in detail the design considerations for these systems handling the extreme data throughput resulting from central lead ions collisions at LHC energy. The implementation of the resulting requirements into hardware (custom optical links and commercial computing equipment), infrastructure (racks, cooling, power distribution, control room), and software led to many innovative solutions which are described together with ...
DEFF Research Database (Denmark)
Fomcenco, Alex
This dissertation is a legal dogmatic thesis, the goal of which is to describe and analyze the current state of law in Europe in regard to some relevant selected elements related to mergers and acquisitions, and the adviser’s counsel in this regard. Having regard to the topic of the dissertation...... and fiscal neutrality, group-related issues, holding-structure issues, employees, stock exchange listing issues, and corporate nationality....
A Lossless Network for Data Acquisition
AUTHOR|(SzGeCERN)698154; The ATLAS collaboration; Lehmann Miotto, Giovanna
2016-01-01
The planned upgrades of the experiments at the Large Hadron Collider at CERN will require higher bandwidth networks for their data acquisition systems. The network congestion problem arising from the bursty many-to-one communication pattern, typical for these systems, will become more demanding. It is questionable whether commodity TCP/IP and Ethernet technologies in their current form will be still able to effectively adapt to the bursty traffic without losing packets due to the scarcity of buffers in the networking hardware. We continue our study of the idea of lossless switching in software running on commercial-off-the-shelf servers for data acquisition systems, using the ATLAS experiment as a case study. The flexibility of design in software, performance of modern computer platforms, and buffering capabilities constrained solely by the amount of DRAM memory are a strong basis for building a network dedicated to data acquisition with commodity hardware, which can provide reliable transport in congested co...
Acquisition Information Management system telecommunication site survey results
Energy Technology Data Exchange (ETDEWEB)
Hake, K.A. [Oak Ridge National Lab., TN (United States); Key, B.G. [COR, Inc., Oak Ridge, TN (United States)
1993-09-01
The Army acquisition community currently uses a dedicated, point-to-point secure computer network for the Army Material Plan Modernization (AMPMOD). It must transition to the DOD supplied Defense Secure Network 1 (DSNET1). This is one of the first networks of this size to begin the transition. The type and amount of computing resources available at individual sites may or may not meet the new network requirements. This task surveys these existing telecommunications resources available in the Army acquisition community. It documents existing communication equipment, computer hardware, associated software, and recommends appropriate changes.
2010-07-01
... exceeds 10 percent of the fair market value of the assets of the plan. (b) Acquisition. For pusposes of... dividend or stock split. (c) Fair market value—Indebtedness incurred in connection with the acquisition of... value of total plan assets shall be the fair market value of such assets less the unpaid amount of: (1...
2016-09-01
Figure 12. PPBE Process Flowchart . Source: AcqNotes (2016). We comment above that once a program manager has completed his major Defense...acquisition system: 1) acquisition, 2) requirements and 3) planning, programming , budgeting, and execution (PPBE). We looked at the evolution of...to gain traction or improve promulgation of key guidance and documentation for new-starts and/or upgrades to weapon system acquisition programs
LANDSAT-D ground segment operations plan, revision A
Evans, B.
1982-01-01
The basic concept for the utilization of LANDSAT ground processing resources is described. Only the steady state activities that support normal ground processing are addressed. This ground segment operations plan covers all processing of the multispectral scanner and the processing of thematic mapper through data acquisition and payload correction data generation for the LANDSAT 4 mission. The capabilities embedded in the hardware and software elements are presented from an operations viewpoint. The personnel assignments associated with each functional process and the mechanisms available for controlling the overall data flow are identified.
International Nuclear Information System (INIS)
Petremann, E.
1989-01-01
The development and construction of a complete data acquisition system for nuclear physics applications, are described. The system is based on the VME bus and the 16/32 bits microprocessor. The data acquisition system enables the obtention of line spectra, involving one or two parameters, and the simultaneous storage of events in a magnetic tape. The analysis and the description of the data acquisition software, the experimental spectra display and saving on magnetic systems are given. Pascal and Assembler are used. The development of cards, for the standard VME and electronic equipment interfaces, is performed [fr
Software for nuclear data acquisition systems
International Nuclear Information System (INIS)
Christensen, P.
1983-01-01
The situation for experimenters and system designers needing software for instrumentation is described. It is stated that software for a data acquisition system can be divided into programmes described as the foundation software, the applications programme, and the analysis programme. Special attention is given to CAMAC. Two examples from Risoe describing data transportation and archiving are given. Finally the supply of software and the problems of documentation are described. (author)
Stathopoulos, Fotios; Guillermin, Guillaume; Garcia Acero, Carlos; Reich, Karin; Mrowka, Falk
2016-01-01
After the successful Global Coverage of the Digital Elevation Model, the TanDEM-X Science phase was initiated in September of 2014, dedicated to the demonstration of innovative techniques and experiments. The TanDEM-X Science phase had a large impact on the TerraSAR-X/TanDEM-X Mission Planning System. The two main challenges were the formation flying changes and the activation of a new acquisition mode, the so called Dual Receive Antenna (DRA) acquisition mode. This paper describes all action...
PAN-DA and beyond: Data acquisition for the next generation experiments
International Nuclear Information System (INIS)
Pordes, R.; Anderson, J.; Berg, D.; Berman, E.; Brown, D.; Dorries, T.; Mackinnon, B.; Meadows, J.; Moore, C.; Nicinski, T.; Oleynik, G.; Petravick, D.; Rechenmacher, R.; Sergey, G.; Slimmer, D.; Streets, J.; Vittone, M.; Votava, M.; Wilcer, N.; White, V.
1991-06-01
We report on the status of the PAN-DA data acquisition system presented at the last Real Time Conference. Since that time, PAN-DA has been successfully used in the fixed target program at Fermilab. We also report on the plans and strategies for development of a new data acquisition system for the next generation of fixed target experiments at Fermilab. 10 refs., 3 figs
48 CFR 970.5226-1 - Diversity plan.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Diversity plan. 970.5226-1... and Operating Contracts 970.5226-1 Diversity plan. As prescribed in 48 CFR 970.2671-2, insert the following clause: Diversity Plan (DEC 2000) The Contractor shall submit a Diversity Plan to the contracting...
Design of data acquisition system for GEM detector
International Nuclear Information System (INIS)
Lu Jianliang; Chen Ziyu; Shen Ji; Jin Xi
2011-01-01
It describes the design and realization of the USB 2.0 high speed data acquisition devise which is used in the readout electronics of the GEM (gas electron multiplier) detector. By using of the USB Microcontroller EZ-USB FX2 CY7C68013A, high speed ADC and FPGA, high-speed data rate of data acquisition and transmission was realized. The data rate reaches to 20 MByte/s, meeting the requirements of data acquisition and transmission of the detector. (authors)
Executing on Integration: The Key to Success in Mergers and Acquisitions.
Bradley, Carol
2016-01-01
Health care mergers and acquisitions require a clearly stated vision and exquisite planning of integration activities to provide the best possible conditions for a successful transaction. During the due diligence process, key steps can be taken to create a shared vision and a plan to inspire confidence and build enthusiasm for all stakeholders. Integration planning should include a defined structure, roles and responsibilities, as well as a method for evaluation.
Minicomputer data acquisition system for nuclear physics applications
Energy Technology Data Exchange (ETDEWEB)
Kouzes, R [Princeton Univ., NJ (USA). Joseph Henry Labs.
1978-09-15
The data acquisition system for the Princeton Cyclotron facility based on a Data General Eclipse computer is described. The program ACQUIRE is a highly flexible acquisition code able to support diverse experimental requirements and yet capable of sorting a repetitious pulser in a single ADC at up to 40 kHz without loss.
Incidental Lexicon Acquisition through Playful Interaction
Lukas Wilhelm Ansteeg
2015-01-01
This paper presents an educational game which aids learners with foreign lexicon acquisition while entertaining them at the same time. An overview over existing language learning tools is given, and a general platform for educational games for second language acquisition (SLA) is described. It introduces a specific prototype video game which teaches Italian vocabulary to the user. The application puts learning at the core of its game mechanics and combines it with a narrative and role-playing...
DABASCO Experiment Data Acquisition and Control System
International Nuclear Information System (INIS)
Alberdi Primicia, J.; Artigao Arteaga, A.; Barcala Rieveira, J. M.; Oller Gonzalez, J. C.
2000-01-01
DABASCO experiment wants to study the thermohydraulic phenomena produced into the containment area for a severe accident in a nuclear power facility. This document describes the characteristics of the data acquisition and control system used in the experiment. The main elements of the system were a data acquisition board, PCI-MIO-16E-4, and an application written with LaB View. (Author) 5 refs
TFTR diagnostic control and data acquisition system
International Nuclear Information System (INIS)
Sauthoff, N.R.; Daniels, R.E.; PPL Computer Division
1985-01-01
General computerized control and data-handling support for TFTR diagnostics is presented within the context of the Central Instrumentation, Control and Data Acquisition (CICADA) System. Procedures, hardware, the interactive man--machine interface, event-driven task scheduling, system-wide arming and data acquisition, and a hierarchical data base of raw data and results are described. Similarities in data structures involved in control, monitoring, and data acquisition afford a simplification of the system functions, based on ''groups'' of devices. Emphases and optimizations appropriate for fusion diagnostic system designs are provided. An off-line data reduction computer system is under development
A data acquisition architecture for the SSC
International Nuclear Information System (INIS)
Partridge, R.
1990-01-01
An SSC data acquisition architecture applicable to high-p T detectors is described. The architecture is based upon a small set of design principles that were chosen to simplify communication between data acquisition elements while providing the required level of flexibility and performance. The architecture features an integrated system for data collection, event building, and communication with a large processing farm. The interface to the front end electronics system is also discussed. A set of design parameters is given for a data acquisition system that should meet the needs of high-p T detectors at the SSC
The data-acquisition and second level trigger system for the ZEUS calorimeter
International Nuclear Information System (INIS)
Lugt, H.J. van der.
1993-01-01
ZEUS and HERA are introduced in chapter 1 with emphasis on the ZEUS Calorimeter and the ZEUS trigger system. The analog and digital electronics developed for the readout of the Calorimeter signals, and the hardware for the Calorimeter Second Level Trigger and data-acquisition system, is described in chapter 2. Emphasis is put on the hardware developed at NIKHEF, which is based on the transputer as the main processing element. The ZEUS trigger and data-acquisition environment as well as the calibration procedures needed for the Calorimeter impose several requirements on the design of the data-acquisition system. The requirements, their implications for the design of the transputer network architecture and the design itself, are described in detail in chapter 3. The software developed for the Calorimeter data-acquisition is described in chapter 4. It includes both the software for the Calorimeter data-acquisition as that required for the calibration of the Calorimeter. First experiences with the CAL-SLT algorithms, obtained during the 1992 HERA running periods, are presented in chapter 5. Chapter 6 discusses the performance of the Calorimeter data-acquisition system. (orig.)
Distributed multiprotocol acquisition network for environmental data
Barone, Fabrizio; De Rosa, Rosario; Milano, Leopoldo; Qipiani, Ketevan
2003-03-01
The acquisition and storage of large amount of data coming from distributed environmental sensors of different kind can be solved with the aid of a network between the acquisition subsystems, but problems can arise if they are not homogeneous. In this case the network should be as flexible as possible to ensure modularity and connectivity. In this work we describe the development and testing of a network based acquisition system. The network uses, where possible, commercial products, based on different standards, in order to increase the availability of its components, as well as its modularity. In addition it is completely independent from proprietary hardware and software products. In particular we tested an acquisition network based on multiple transmission protocol, like wireless and cabled RS232 and Fast Ethernet, which includes the acquisition, archiving and data analysis systems. Each acquisition subsystem can get time from satellite using GPS, and is able to monitor seismic activity, temperature, pressure, humidity and electromagnetic data. The sampling frequency and the dynamics of the acquired data can be matched to the characteristics of each probe. All the acquisition stations can use different platform as well as different operating systems. Tests have been performed to evaluate the capability of long acquisition periods and the fault tolerance of the whole system.
Acquisition of Scientific Literature in Developing Countries. 3: Pakistan.
Haider, Syed Jalaluddin
1989-01-01
Summarizes the development of science and technology in Pakistan and the existing library resources in science and technology. The organization of acquisitions work is described, including acquisitions policy, book selection, financial support, procurement of books and periodicals, import restrictions, book order work, and gifts and exchanges.…
48 CFR 1426.7102 - Minority Business Development Agency (MBDA-91) Plan and Reports.
2010-10-01
... Reports 1426.7102 Minority Business Development Agency (MBDA-91) Plan and Reports. ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Minority Business Development Agency (MBDA-91) Plan and Reports. 1426.7102 Section 1426.7102 Federal Acquisition Regulations...
Möbus, Claus; Schröder, Olaf
1993-01-01
The topic of our project has been to empirically investigate and to model processes of the acquisition, utilization, and optimization of knowledge while working with the ABSYNT Problem Solving Monitor (PSM ). The ABSYNT PSM is designed to support the acquisition of basic functional programming concepts by supplying learners with individualized, adaptive online help and proposals. ABSYNT ("Abstract Syntax Trees") is a functional visual programming language developed in the project. The ABSYNT ...
General image acquisition parameters
International Nuclear Information System (INIS)
Teissier, J.M.; Lopez, F.M.; Langevin, J.F.
1993-01-01
The general parameters are of primordial importance to achieve image quality in terms of spatial resolution and contrast. They also play a role in the acquisition time for each sequence. We describe them separately, before associating them in a decision tree gathering the various options that are possible for diagnosis
48 CFR 5152.208-9001 - Industrial preparedness planning.
2010-10-01
... planning. 5152.208-9001 Section 5152.208-9001 Federal Acquisition Regulations System DEPARTMENT OF THE ARMY... planning. As prescribed at 5108-070(g)(4) insert the following clause in full text in contracts where the contractor is designated a Limited Fee Planned Producer. Industrial Preparedness Planning (XXX 1989) (DEV) (a...
International Nuclear Information System (INIS)
Price, L.E.
1990-01-01
The SSC Laboratory is in the process of planning the acquisition of a substantial computing system to support the design of detectors. Advice has been sought from users and computer experts in several stages. This paper discuss this process
Tax Implication of Structuring and Financing Mergers and Acquisitions
Directory of Open Access Journals (Sweden)
Cristian Ianca
2008-09-01
Full Text Available The structuring and financing of mergers and acquisitions has substantial tax consequences. The decision to acquire the assets or the shares of the target company should take into consideration, on one hand, the capital gains taxation at the transaction time and, on the other hand, the tax planning opportunities for the future. The tax burden can also be minimized by an optimum selection of the acquisition vehicle. The choice of a financing alternative should take into account the interest deductibility and the specific tax regulations of each jurisdiction concerned.
Energy Technology Data Exchange (ETDEWEB)
Aquino, Andre Teixeira de; Juca, Sandro Cesar Silveira; Cavalcante, Tiago Malveira [Centro Federal de Educacao Tecnologica de Petrolina (CEFET), PE (Brazil). Area da Industria; Carvalho, Paulo Cesar Marques de [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Engenharia Eletrica
2008-07-01
The work describes a micro controlled acquisition data system of low cost (Simlogger), as well as analyzing the results with implementation in a pumping water system that uses the photovoltaic conversion of the solar energy to foretell optimum day period for the pumps drive increasing, thus, the converted energy efficiency. Voltage values measurements had been carried through during two days in a solar pump by five photovoltaic panels in parallel. The readings had been carried through in intervals of 10 minutes and the data rescue was made using a supervision software that generates analog graphs of obtained data in a personal computer. This acquisition system makes possible the planning of solar energy optimum period for conversion in potential energy through the water pumping for high reservoirs. (author)
A nuclear data acquisition system flow control model
International Nuclear Information System (INIS)
Hack, S.N.
1988-01-01
A general Petri Net representation of a nuclear data acquisition system model is presented. This model provides for the unique requirements of a nuclear data acquisition system including the capabilities of concurrently acquiring asynchronous and synchronous data, of providing multiple priority levels of flow control arbitration, and of permitting multiple input sources to reside at the same priority without the problem of channel lockout caused by a high rate data source. Finally, a previously implemented gamma camera/physiological signal data acquisition system is described using the models presented
Nguyen, Tien M.; Guillen, Andy T.
2017-05-01
This paper describes cooperative and non-cooperative static Bayesian game models with complete and incomplete information for the development of optimum acquisition strategies associated with the Program and Technical Baseline (PTB) solutions obtained from Part 1 of this paper [1]. The optimum acquisition strategies discussed focus on achieving "Affordability" by incorporating contractors' bidding strategies into the government acquisition strategies for acquiring future space systems. The paper discusses System Engineering (SE) frameworks, analytical and simulation approaches and modeling for developing the optimum acquisition strategies from both the government and contractor perspectives for Firm Fixed Price (FFP) and Fixed Price Incentive Firm (FPIF) contract types.
Distributed real time data processing architecture for the TJ-II data acquisition system
International Nuclear Information System (INIS)
Ruiz, M.; Barrera, E.; Lopez, S.; Machon, D.; Vega, J.; Sanchez, E.
2004-01-01
This article describes the performance of a new model of architecture that has been developed for the TJ-II data acquisition system in order to increase its real time data processing capabilities. The current model consists of several compact PCI extension for instrumentation (PXI) standard chassis, each one with various digitizers. In this architecture, the data processing capability is restricted to the PXI controller's own performance. The controller must share its CPU resources between the data processing and the data acquisition tasks. In the new model, distributed data processing architecture has been developed. The solution adds one or more processing cards to each PXI chassis. This way it is possible to plan how to distribute the data processing of all acquired signals among the processing cards and the available resources of the PXI controller. This model allows scalability of the system. More or less processing cards can be added based on the requirements of the system. The processing algorithms are implemented in LabVIEW (from National Instruments), providing efficiency and time-saving application development when compared with other efficient solutions
48 CFR 31.205-12 - Economic planning costs.
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Economic planning costs... GENERAL CONTRACTING REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 31.205-12 Economic planning costs. Economic planning costs are the costs of general long-range...
Data acquisition system for nuclear reactor environment
International Nuclear Information System (INIS)
Tiwari, Akash; Tiwari, Railesha; Tiwari, S.S.; Panday, Lokesh; Suri, Nitin; Chouksey, Abhsek; Singh, Sarvesh Kumar; Dwivedi, Tarun; Agrawal, Ashish; Pandey, Pranav Kumar; Sharma, Brijnandan; Bhatia, Chirag
2004-01-01
We have designed an online real time data acquisition system for nuclear reactor environment monitoring. Data acquisition system has eight channels of analog signals and one channel of pulsed input signal from detectors like GM Tube, or any other similar input. Connectivity between the data acquisition system and environmental parameters monitoring computer is made through a wireless data communication link of 151 MHz/100 mW RF power and 10 km maximum communication range for remote data telemetry. Sensors used are gamma ionizing radiation sensor made from CsI:Tl scintillator, atmospheric pressure sensor with +/-0.1 mbar precision, temperature sensor with +/-l milli degree Celsius precision, relative humidity with +/-0.1RH precision, pulse counts with +/-1 count in 0-10000 Hz count rate measurement precision and +/-1 count is accumulated count measurement precision. The entire data acquisition system and wireless telemetry system is 9 V battery powered and the device is to be fitted on a wireless controlled mobile robot for scanning the nuclear reactor zone from remote. Wireless video camera has been planned for integration into the existing system on a later date for moving the robotics environmental data acquisition system beyond human vision reach. System development cost is Rs.25 Lacs and has been developed for Department of Atomic Energy, Government of India and Indian Defense use. (author)
Incident reporting: Its role in aviation safety and the acquisition of human error data
Reynard, W. D.
1983-01-01
The rationale for aviation incident reporting systems is presented and contrasted to some of the shortcomings of accident investigation procedures. The history of the United State's Aviation Safety Reporting System (ASRS) is outlined and the program's character explained. The planning elements that resulted in the ASRS program's voluntary, confidential, and non-punitive design are discussed. Immunity, from enforcement action and misuse of the volunteered data, is explained and evaluated. Report generation techniques and the ASRS data analysis process are described; in addition, examples of the ASRS program's output and accomplishments are detailed. Finally, the value of incident reporting for the acquisition of safety information, particularly human error data, is explored.
Data acquisition for the Zeus central tracking detector
International Nuclear Information System (INIS)
Quinton, S.; Allen, D.; Cambell, D.; Mcarthur, I.
1990-01-01
The Zeus experiment is being installed on the Hera electron-proton collider being built at the Desy laboratory in Hamburg. The high-beam crossover rate of the Hera machine will provide experience in data acquisition and triggering relevant to the environment of future accelerators such as the SSC. The Transputer-based data acquisition system for the Zeus central tracking detector is described
The data acquisition tasks for TASSO. User manual
International Nuclear Information System (INIS)
Quarrie, D.R.
1981-07-01
The TASSO Data Acquisition System is designed to accept events from various trigger sources at rates of several Hz and to transfer these events to the central DESY IBM Triplex for later offline analysis. A NORD 10S computer is used for this purpose with several data acquisition tasks running under control of a Supervisor task DASSO that is described elsewhere. (author)
Electron beam fusion data acquisition program DATAIN (EBD)
International Nuclear Information System (INIS)
Boyer, W.B.
1977-02-01
This report describes the e beam automatic data acquisition program DATAIN. The program was written for a Modular Computer Systems Modcomp II computer interfaced to Tektronix R7912 Transient Digitizers. Operator Communications and data handling steps are described
48 CFR 1852.236-73 - Hurricane plan.
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Hurricane plan. 1852.236-73... Hurricane plan. As prescribed in 1836.570(c), insert the following clause: Hurricane Plan (DEC 1988) In the event of a hurricane warning, the Contractor shall— (a) Inspect the area and place all materials...
Development of a data acquisition unit intended for pulsed plasma measurements
International Nuclear Information System (INIS)
Moulin, B.
1976-12-01
A system suitable for the acquisition of the signals from measuring devices implanted in Petula and Wega is described. The technical specifications of the data acquisition system are discussed together with the results obtained [fr
48 CFR 3052.216-72 - Performance evaluation plan.
2010-10-01
... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Performance evaluation... CONTRACT CLAUSES Text of Provisions and Clauses 3052.216-72 Performance evaluation plan. As prescribed in... Evaluation Plan (DEC 2003) (a) A Performance Evaluation Plan shall be unilaterally established by the...
48 CFR 2452.216-73 - Performance evaluation plan.
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Performance evaluation plan... 2452.216-73 Performance evaluation plan. As prescribed in 2416.406(e)(3), insert the following clause in all award fee contracts: Performance Evaluation Plan (AUG 1987) (a) The Government shall...
48 CFR 1252.216-72 - Performance evaluation plan.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Performance evaluation....216-72 Performance evaluation plan. As prescribed in (TAR) 48 CFR 1216.406(b), insert the following clause: Performance Evaluation Plan (OCT 1994) (a) A Performance Evaluation Plan shall be unilaterally...
2015-09-01
Applicable to NAVSUP NFCS (after NLL, 2015) ...................21 Table 3. DON SAP Policy Letters (after NLL, 2015...and Acquisition Policy ERP Enterprise Resource Planning FAR Federal Acquisition Regulation FLC Fleet Logistic Center GLS Global Logistics...DON SAP Policy Letters (after NLL, 2015) Policy Letter # Subject Date Issued Current? Y/N Comments SA12- 03R1 NAVSUP ENTERPRISE POLICY FOR
2012-04-03
... to which technology, economic conditions, or other factors have changed in the area affected by the... comments on factors described in the Supplementary Information. DATES: Comments must be received by VA on... (003A2A), Office of Acquisition, Logistics and Construction, Department of Veterans Affairs, 810 Vermont...
International Nuclear Information System (INIS)
Cyborski, D.R.; Teh, K.M.
1995-01-01
Up to now, DAPHNE, the data-acquisition system developed for ATLAS, was used routinely for experiments at ATLAS and the Dynamitron. More recently, the Division implemented 2 MSU/DAPHNE systems. The MSU/DAPHNE system is a hybrid data-acquisition system which combines the front-end of the Michigan State University (MSU) DA system with the traditional DAPHNE back-end. The MSU front-end is based on commercially available modules. This alleviates the problems encountered with the DAPHNE front-end which is based on custom designed electronics. The first MSU system was obtained for the APEX experiment and was used there successfully. A second MSU front-end, purchased as a backup for the APEX experiment, was installed as a fully-independent second MSU/DAPHNE system with the procurement of a DEC 3000 Alpha host computer, and was used successfully for data-taking in an experiment at ATLAS. Additional hardware for a third system was bought and will be installed. With the availability of 2 MSU/DAPHNE systems in addition to the existing APEX setup, it is planned that the existing DAPHNE front-end will be decommissioned
Data acquisition for X ray microprobe. User's manual
International Nuclear Information System (INIS)
2002-01-01
A modified data acquisition software for X ray microprobe was developed by the Physics Group, Instrumentation Unit, IAEA Laboratories at Seibersdorf, with assistance from M. Bogovac, Croatia. The software consists of data acquisition (scanning and calibration), automatic positioning and micro-movement of sample, data reduction and evaluation. The acquisition software was designed in order to support different measurement set-ups which are applied in low-energy nuclear physics. The modification was done in 1999-2000 under the projects Nuclear Spectrometry and Utilization of Particle Accelerators. The manual supersedes the first version entitled Microanalysis Data Acquisition and Control Program published under Computer Manual Series, No. 9 in 1996. The software described in this manual is freely available from the IAEA upon request
"Hello Jumbo!” The spatio-temporal rollout and traffic to a new grocery chain after acquisition
van Lin, Arjen; Gijsbrechts, Els
Grocery retailers increasingly use acquisitions to expand their presence. Such acquisitions are risky, especially when retailers decide to subsume the acquired stores under their own banner, which can take years and demands careful planning. We show how the dynamics of consumer valuations of the old
26 CFR 1.401(m)-4 - Special rules for mergers, acquisitions and similar events. [Reserved
2010-04-01
... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Special rules for mergers, acquisitions and similar events. [Reserved] 1.401(m)-4 Section 1.401(m)-4 Internal Revenue INTERNAL REVENUE SERVICE... Bonus Plans, Etc. § 1.401(m)-4 Special rules for mergers, acquisitions and similar events. [Reserved] ...
Advanced data acquisition system for SEVAN
Chilingaryan, Suren; Chilingarian, Ashot; Danielyan, Varuzhan; Eppler, Wolfgang
2009-02-01
Huge magnetic clouds of plasma emitted by the Sun dominate intense geomagnetic storm occurrences and simultaneously they are correlated with variations of spectra of particles and nuclei in the interplanetary space, ranging from subtermal solar wind ions till GeV energy galactic cosmic rays. For a reliable and fast forecast of Space Weather world-wide networks of particle detectors are operated at different latitudes, longitudes, and altitudes. Based on a new type of hybrid particle detector developed in the context of the International Heliophysical Year (IHY 2007) at Aragats Space Environmental Center (ASEC) we start to prepare hardware and software for the first sites of Space Environmental Viewing and Analysis Network (SEVAN). In the paper the architecture of the newly developed data acquisition system for SEVAN is presented. We plan to run the SEVAN network under one-and-the-same data acquisition system, enabling fast integration of data for on-line analysis of Solar Flare Events. An Advanced Data Acquisition System (ADAS) is designed as a distributed network of uniform components connected by Web Services. Its main component is Unified Readout and Control Server (URCS) which controls the underlying electronics by means of detector specific drivers and makes a preliminary analysis of the on-line data. The lower level components of URCS are implemented in C and a fast binary representation is used for the data exchange with electronics. However, after preprocessing, the data are converted to a self-describing hybrid XML/Binary format. To achieve better reliability all URCS are running on embedded computers without disk and fans to avoid the limited lifetime of moving mechanical parts. The data storage is carried out by means of high performance servers working in parallel to provide data security. These servers are periodically inquiring the data from all URCS and storing it in a MySQL database. The implementation of the control interface is based on high level
The Bochum on-line data acquisition system
International Nuclear Information System (INIS)
Paul, H.J.; Freiesleben, H.
1986-01-01
We describe an on-line data acquisition system based on a PDP 11 computer with CAMAC hardware. The software fully exploits the real-time features of the RSX-11M operating system. The basic characteristics of the program package, mainly written in FORTRAN 77, are: multitasking, shared common blocks, dynamical access to CAMAC hardware and data, and command orientated user interface. The system is particularly tailored for data acquisition in list mode of up to 64 parameters. (orig.)
Mergers and Acquisitions-1998 M&A: The Year in Review.
Defendeifer, Linda
1999-01-01
Discusses mergers and acquisitions in the publishing industry, including alliances among the largest publishers and printers; planned and abandoned deals; issues in academia, including rising scholarly journal prices and electronic journals; smaller firm alliances; magazine publishing; and newspaper consolidations. (LRW)
Optimization of Hierarchical System for Data Acquisition
Directory of Open Access Journals (Sweden)
V. Novotny
2011-04-01
Full Text Available Television broadcasting over IP networks (IPTV is one of a number of network applications that are except of media distribution also interested in data acquisition from group of information resources of variable size. IP-TV uses Real-time Transport Protocol (RTP protocol for media streaming and RTP Control Protocol (RTCP protocol for session quality feedback. Other applications, for example sensor networks, have data acquisition as the main task. Current solutions have mostly problem with scalability - how to collect and process information from large amount of end nodes quickly and effectively? The article deals with optimization of hierarchical system of data acquisition. Problem is mathematically described, delay minima are searched and results are proved by simulations.
The ALICE data acquisition system
Energy Technology Data Exchange (ETDEWEB)
Carena, F.; Carena, W.; Chapeland, S.; Chibante Barroso, V.; Costa, F. [European Organization for Nuclear Research (CERN), Geneva 23 (Switzerland); Dénes, E. [Research Institute for Particle and Nuclear Physics, Wigner Research Center, Budapest (Hungary); Divià, R.; Fuchs, U. [European Organization for Nuclear Research (CERN), Geneva 23 (Switzerland); Grigore, A. [European Organization for Nuclear Research (CERN), Geneva 23 (Switzerland); Politehnica Univesity of Bucharest, Bucharest (Romania); Kiss, T. [Cerntech Ltd., Budapest (Hungary); Simonetti, G. [Dipartimento Interateneo di Fisica ‘M. Merlin’, Bari (Italy); Soós, C.; Telesca, A.; Vande Vyvre, P. [European Organization for Nuclear Research (CERN), Geneva 23 (Switzerland); Haller, B. von, E-mail: bvonhall@cern.ch [European Organization for Nuclear Research (CERN), Geneva 23 (Switzerland)
2014-03-21
In this paper we describe the design, the construction, the commissioning and the operation of the Data Acquisition (DAQ) and Experiment Control Systems (ECS) of the ALICE experiment at the CERN Large Hadron Collider (LHC). The DAQ and the ECS are the systems used respectively for the acquisition of all physics data and for the overall control of the experiment. They are two computing systems made of hundreds of PCs and data storage units interconnected via two networks. The collection of experimental data from the detectors is performed by several hundreds of high-speed optical links. We describe in detail the design considerations for these systems handling the extreme data throughput resulting from central lead ions collisions at LHC energy. The implementation of the resulting requirements into hardware (custom optical links and commercial computing equipment), infrastructure (racks, cooling, power distribution, control room), and software led to many innovative solutions which are described together with a presentation of all the major components of the systems, as currently realized. We also report on the performance achieved during the first period of data taking (from 2009 to 2013) often exceeding those specified in the DAQ Technical Design Report.
International Nuclear Information System (INIS)
Arevalo, S; Atwood, C; Bell, P; Blacker, T D; Dey, S; Fisher, D; Fisher, D A; Genalis, P; Gorski, J; Harris, A; Hill, K; Hurwitz, M; Kendall, R P; Meakin, R L; Morton, S; Moyer, E T; Post, D E; Strawn, R; Veldhuizen, D v; Votta, L G
2008-01-01
In FY2008, the U.S. Department of Defense (DoD) initiated the Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, a $360M program with a two-year planning phase and a ten-year execution phase. CREATE will develop and deploy three computational engineering tool sets for DoD acquisition programs to use to design aircraft, ships and radio-frequency antennas. The planning and execution of CREATE are based on the 'lessons learned' from case studies of large-scale computational science and engineering projects. The case studies stress the importance of a stable, close-knit development team; a focus on customer needs and requirements; verification and validation; flexible and agile planning, management, and development processes; risk management; realistic schedules and resource levels; balanced short- and long-term goals and deliverables; and stable, long-term support by the program sponsor. Since it began in FY2008, the CREATE program has built a team and project structure, developed requirements and begun validating them, identified candidate products, established initial connections with the acquisition programs, begun detailed project planning and development, and generated the initial collaboration infrastructure necessary for success by its multi-institutional, multidisciplinary teams
The CMD-3 Data Acquisition System
Kozyrev, A N; Epifanov, D A; Epshteyn, L B; Logashenko, I B; Mikhailov, K Yu; Popov, A S; Ruban, A A; Selivanov, A N; Talyshev, A A; Titov, V M; Yudin, Y V
2017-01-01
The specialized data acquisition system designed for CMD-3 detector which is installed at the electron-positron collider VEPP-2000 to the Budker Institute of Nuclear Physics, Novosibirsk, Russia. The structure of electronic hardware and firmware is described.
A small Unix-based data acquisition system
International Nuclear Information System (INIS)
Engberg, D.; Glanzman, T.
1993-06-01
The proposed SLAC B Factory detector plans to use Unix-based machines for all aspects of computing, including real-time data acquisition and experimental control. An R ampersand D program has been established to investigate the use of Unix in the various aspects of experimental computation. Earlier R ampersand D work investigated the basic real-time aspects of the IBM RS/6000 workstation running AIX. The next step in this R ampersand D is the construction of prototype data acquisition system which attempts to exercise many of the features needed in the final on-line system in a realistic situation. For this project, we have combined efforts with a team studying the use of novel cell designs and gas mixtures in a new prototype drift chamber
Path Planning Algorithms for the Adaptive Sensor Fleet
Stoneking, Eric; Hosler, Jeff
2005-01-01
The Adaptive Sensor Fleet (ASF) is a general purpose fleet management and planning system being developed by NASA in coordination with NOAA. The current mission of ASF is to provide the capability for autonomous cooperative survey and sampling of dynamic oceanographic phenomena such as current systems and algae blooms. Each ASF vessel is a software model that represents a real world platform that carries a variety of sensors. The OASIS platform will provide the first physical vessel, outfitted with the systems and payloads necessary to execute the oceanographic observations described in this paper. The ASF architecture is being designed for extensibility to accommodate heterogenous fleet elements, and is not limited to using the OASIS platform to acquire data. This paper describes the path planning algorithms developed for the acquisition phase of a typical ASF task. Given a polygonal target region to be surveyed, the region is subdivided according to the number of vessels in the fleet. The subdivision algorithm seeks a solution in which all subregions have equal area and minimum mean radius. Once the subregions are defined, a dynamic programming method is used to find a minimum-time path for each vessel from its initial position to its assigned region. This path plan includes the effects of water currents as well as avoidance of known obstacles. A fleet-level planning algorithm then shuffles the individual vessel assignments to find the overall solution which puts all vessels in their assigned regions in the minimum time. This shuffle algorithm may be described as a process of elimination on the sorted list of permutations of a cost matrix. All these path planning algorithms are facilitated by discretizing the region of interest onto a hexagonal tiling.
26 CFR 1.401(k)-5 - Special rules for mergers, acquisitions and similar events. [Reserved
2010-04-01
... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Special rules for mergers, acquisitions and similar events. [Reserved] 1.401(k)-5 Section 1.401(k)-5 Internal Revenue INTERNAL REVENUE SERVICE... Bonus Plans, Etc. § 1.401(k)-5 Special rules for mergers, acquisitions and similar events. [Reserved] [T...
Determination of characteristics of feromagnetic material using modern data acquisition system
Directory of Open Access Journals (Sweden)
Koprivica Branko
2009-01-01
Full Text Available This paper describes the use of modern measuring and data acquisition system for determining characteristics of feromagnetic material. For this purpose data acquisition card NI USB-6009, PC with data acquisition software and fluxmeter Electrical Steel Measuring System MPG 100 D were used. Based on the results obtained by measurements the modeling of hysteresis loop is performed by using appropriate mathematical model.
Acquisition/Diversion Pathway Analysis for the Assessment of Proliferation Resistance
International Nuclear Information System (INIS)
Chang, Hong Lae; Ko, Won Il
2009-01-01
The INPRO methodology in the area of proliferation resistance (PR) has one basic principle and five user requirements with relevant criteria, indicators, evaluation parameters, etc. The two Korean case studies on proliferation resistance of the DUPIC fuel cycle during 2004 and 2005 and various consultancy meetings have contributed to the establishment of the assessment metrics and procedures for three user requirements regarding States' commitment, attractiveness of nuclear material and technology, and difficulty and detectability of diversion. However, the assessment indicators and procedure for user requirement 4 regarding multiplicity and robustness of barriers against proliferation still need to be developed. In this paper, a systematic approach to identify and analyze the acquisition/diversion pathways in a nuclear energy system is described, including follow-up R and D plans to assess the multiplicity and robustness of barriers against proliferation
Data acquisition and detector characterization of GEO600
International Nuclear Information System (INIS)
Koetter, K; Aulbert, C; Babak, S; Balasubramanian, R; Berukoff, S; Bose, S; Churches, D; Colacino, C N; Cutler, C; Danzmann, K; Davies, R; Dupuis, R; Freise, A; Grote, H; Heinzel, G; Hewitson, M; Hough, J; Lueck, H; Malec, M; Mohanty, S D; Mukherjee, S; Nagano, S; Papa, M A; Robertson, D; Sathyaprakash, B S; Schutz, B F; Sintes, A M; Strain, K A; Taylor, I J; Vecchio, A; Ward, H; Weiland, U; Willke, B; Woan, G
2002-01-01
The data acquisition system of the gravitational wave detector GEO600 is recording the first data now. Data from detector subsystems and environmental channels are being acquired. The data acquisition system is described and first results from the detector characterization work are being presented. We analysed environmental influences on the detector to determine noise propagation through the detector. Long-term monitoring allowed us to see long-timescale drifts in subsystems
UNIBUS processor interface for a FASTBUS data acquisition system
International Nuclear Information System (INIS)
Larwill, M.; Lagerlund, T.D.; Barsotti, E.; Taff, L.M.; Franzen, J.
1981-01-01
Current work on a FASTBUS data acquisition system at Fermilab is described. The system will consist of three pieces of FASTBUS hardware: a UNIBUS processor interface (UPI), a dual-ported bulk memory, and a FASTBUS ''event builder'' (i.e., data acquisition processor). Primary efforts have been on specifying and constructing a UPI. The present specification includes capability for all basic FASTBUS operations, including list processing of consecutive FASTBUS operations. Some possible FASTBUS data acquisition system architectures employing the UPI are discussed along with some detailed specifications of the UPI itself
Foundation for the Future. 2013-2015 Strategic Plan. FY13 Organizational Performance Plan
2013-01-01
Strengths, Weaknesses, Opportunities, and Threats ( SWOT ) Analysis 192013–2015 Strategic Plan tr t ic l The Planning, Policy, and Leadership Support (PPLS...and public cloud mix Conduct government/private market survey to determine future cloud strategy Implement future cloud strategy Thin Client...Systems Acquisition Reform Act of 2009, National Security Strategy , and the Digital Government Strategy • Department of Defense, as set forth in the
ATLAS Trigger and Data Acquisition Upgrades for High Luminosity LHC
AUTHOR|(INSPIRE)INSPIRE-00439268; The ATLAS collaboration
2016-01-01
The ATLAS experiment at CERN is planning a second phase of upgrades to prepare for the "High Luminosity LHC", a 4th major run due to start in 2026. In order to deliver an order of magnitude more data than previous runs, 14 TeV protons will collide with an instantaneous luminosity of 7.5 × 1034 cm−2s−1, resulting in much higher pileup and data rates than the current experiment was designed to handle. While this extreme scenario is essential to realise the physics programme, it is a huge challenge for the detector, trigger, data acquisition and computing. The detector upgrades themselves also present new requirements and opportunities for the trigger and data acquisition system. Initial upgrade designs for the trigger and data acquisition system are shown, including the real time low latency hardware trigger, hardware-based tracking, the high throughput data acquisition system and the commodity hardware and software-based data handling and event filtering. The motivation, overall architecture and expected ...
ATLAS Trigger and Data Acquisition Upgrades for High Luminosity LHC
AUTHOR|(INSPIRE)INSPIRE-00421104; The ATLAS collaboration
2016-01-01
The ATLAS experiment at CERN is planning a second phase of upgrades to prepare for the "High Luminosity LHC", a 4th major run due to start in 2026. In order to deliver an order of magnitude more data than previous runs, 14 TeV protons will collide with an instantaneous luminosity of $7.5 \\times 10^{34} cm^{-2}s^{-1}$, resulting in much higher pileup and data rates than the current experiment was designed to handle. While this extreme scenario is essential to realise the physics programme, it is a huge challenge for the detector, trigger, data acquisition and computing. The detector upgrades themselves also present new requirements and opportunities for the trigger and data acquisition system. Initial upgrade designs for the trigger and data acquisition system are shown, including the real time low latency hardware trigger, hardware-based tracking, the high throughput data acquisition system and the commodity hardware and software-based data handling and event filtering. The motivation, overall architecture an...
ATLAS Trigger and Data Acquisition Upgrades for High Luminosity LHC
George, Simon; The ATLAS collaboration
2016-01-01
The ATLAS experiment at CERN is planning a second phase of upgrades to prepare for the "High Luminosity LHC", a 4th major run due to start in 2026. In order to deliver an order of magnitude more data than previous runs, 14 TeV protons will collide with an instantaneous luminosity of 7.5 × 10^{34} cm^{−2}s^{−1}, resulting in much higher pileup and data rates than the current experiment was designed to handle. While this extreme scenario is essential to realise the physics programme, it is a huge challenge for the detector, trigger, data acquisition and computing. The detector upgrades themselves also present new requirements and opportunities for the trigger and data acquisition system. Initial upgrade designs for the trigger and data acquisition system are shown, including the real time low latency hardware trigger, hardware-based tracking, the high throughput data acquisition system and the commodity hardware and software-based data handling and event filtering. The motivation, overall architecture and ...
ATLAS Trigger and Data Acquisition Upgrades for High Luminosity LHC
Balunas, William Keaton; The ATLAS collaboration
2016-01-01
The ATLAS experiment at CERN is planning a second phase of upgrades to prepare for the "High Luminosity LHC", a 4th major run due to start in 2026. In order to deliver an order of magnitude more data than previous runs, 14 TeV protons will collide with an instantaneous luminosity of $7.5 × 10^{34}$ cm$^{−2}$s$^{−1}$, resulting in much higher pileup and data rates than the current experiment was designed to handle. While this extreme scenario is essential to realise the physics programme, it is a huge challenge for the detector, trigger, data acquisition and computing. The detector upgrades themselves also present new requirements and opportunities for the trigger and data acquisition system. Initial upgrade designs for the trigger and data acquisition system are shown, including the real time low latency hardware trigger, hardware-based tracking, the high throughput data acquisition system and the commodity hardware and software-based data handling and event filtering. The motivation, overall architectur...
1994 Electricity plan: An introduction to BC Hydro's integrated resource plan
International Nuclear Information System (INIS)
1994-01-01
A summary is provided of British Columbia Hydro's 1994 electricity plan. The plan provides up-to-date information on the options available to meet the 20-year forecast of domestic electricity requirements as well as an evaluation of alternative resource acquisitions to assess how to best minimize social cost, fulfill corporate objectives, and meet economic development initiatives of the corporation and the provincial government. The resource evaluations also incorporate the most recent information available on energy capabilities, construction, operation, and fuel supply costs, and environmental and socio-economic impacts. The 1994 plan includes updated estimates of the costs and expected contributions from currently committed resource acquisitions, including the Power Smart and Resource Smart programs and the Burrard Upgrade Project. The continuing uncertainty concerning the return of the Canadian Entitlement to the Columbia River Treaty downstream benefits, the purchase of power from the Kemano Completion Project, and the impact of customer self-generation are also considered in the plan. Considering the forecast net energy load and the existing and committed supply, a deficit in supply is forecast by 2003/04 if the treaty entitlement is not returned and by 2008/09 if it is returned. A dependable capacity balance is forecast to be in a negative position only by 2013/14 with a full sale of the treaty entitlement. A glossary is included. 9 figs., 8 tabs
Analysis of the SIAM Infrared Acquisition System
Energy Technology Data Exchange (ETDEWEB)
Varnado, S.G.
1974-02-01
This report describes and presents the results of an analysis of the performance of the infrared acquisition system for a Self-Initiated Antiaircraft Missile (SIAM). A description of the optical system is included, and models of target radiant intensity, atmospheric transmission, and background radiance are given. Acquisition probabilities are expressed in terms of the system signal-to-noise ratio. System performance against aircraft and helicopter targets is analyzed, and background discrimination techniques are discussed. 17 refs., 22 figs., 6 tabs.
Event Handler: a fast programmable, CAMAC-coupled data acquisition interface
International Nuclear Information System (INIS)
Hensley, D.C.
1978-01-01
The purpose of this paper is to describe the architecture and performance of the Event Handler, a fast, programmable data acquisition interface which is linked to and through CAMAC. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics
A microcomputer based multi parametric system for nuclear data acquisition and processing
International Nuclear Information System (INIS)
Toledo Acosta B, Rene; Osorio Deliz F, Juan; Arista Romeu, Eduardo; Perez Sanchez, Reinaldo; Lopes Torres, E.
1997-01-01
A four-parameter Multi parametric System for the acquisition and processing of nuclear data is described. It is characterized for its flexibility and relatively low cost, also guaranteeing a high acquisition capacity. The system allows to be utilized in a multi parametric manner, in pulse height analysis or in many combination of both for parameter. It is described the hardware and the software of the system
Dumand-array data-acquisition system
International Nuclear Information System (INIS)
Brenner, A.E.; Theriot, D.; Dau, W.D.; Geelhood, B.D.; Harris, F.; Learned, J.G.; Stenger, V.; March, R.; Roos, C.; Shumard, E.
1982-04-01
An overall data acquisition approach for DUMAND is described. The scheme assumes one array to shore optical fiber transmission line for each string of the array. The basic event sampling period is approx. 13 μsec. All potentially interesting data is transmitted to shore where the major processing is performed
The SINQ data acquisition environment
Energy Technology Data Exchange (ETDEWEB)
Maden, D [Paul Scherrer Inst. (PSI), Villigen (Switzerland)
1996-11-01
The data acquisition environment for the neutron scattering instruments supported by LNS at SINQ is described. The intention is to provide future users with the necessary background to the computing facilities on site rather than to present a user manual for the on-line system. (author) 5 figs., 6 refs.
The SINQ data acquisition environment
International Nuclear Information System (INIS)
Maden, D.
1996-01-01
The data acquisition environment for the neutron scattering instruments supported by LNS at SINQ is described. The intention is to provide future users with the necessary background to the computing facilities on site rather than to present a user manual for the on-line system. (author) 5 figs., 6 refs
Processing of acquisition data for a time of flight positron tomograph
International Nuclear Information System (INIS)
Robert, G.
1987-10-01
After a review of basic principles concerning the time of flight positron tomography, the LETI positron tomograph is briefly described. For performance optimization (acquisition, calibration, image reconstruction), various specialized operators have been designed: the realization of the acquisition system is presented [fr
Evaluation of Acquisition Strategies for Image-Based Construction Site Monitoring
Tuttas, S.; Braun, A.; Borrmann, A.; Stilla, U.
2016-06-01
Construction site monitoring is an essential task for keeping track of the ongoing construction work and providing up-to-date information for a Building Information Model (BIM). The BIM contains the as-planned states (geometry, schedule, costs, ...) of a construction project. For updating, the as-built state has to be acquired repeatedly and compared to the as-planned state. In the approach presented here, a 3D representation of the as-built state is calculated from photogrammetric images using multi-view stereo reconstruction. On construction sites one has to cope with several difficulties like security aspects, limited accessibility, occlusions or construction activity. Different acquisition strategies and techniques, namely (i) terrestrial acquisition with a hand-held camera, (ii) aerial acquisition using a Unmanned Aerial Vehicle (UAV) and (iii) acquisition using a fixed stereo camera pair at the boom of the crane, are tested on three test sites. They are assessed considering the special needs for the monitoring tasks and limitations on construction sites. The three scenarios are evaluated based on the ability of automation, the required effort for acquisition, the necessary equipment and its maintaining, disturbance of the construction works, and on the accuracy and completeness of the resulting point clouds. Based on the experiences during the test cases the following conclusions can be drawn: Terrestrial acquisition has the lowest requirements on the device setup but lacks on automation and coverage. The crane camera shows the lowest flexibility but the highest grade of automation. The UAV approach can provide the best coverage by combining nadir and oblique views, but can be limited by obstacles and security aspects. The accuracy of the point clouds is evaluated based on plane fitting of selected building parts. The RMS errors of the fitted parts range from 1 to a few cm for the UAV and the hand-held scenario. First results show that the crane camera
EVALUATION OF ACQUISITION STRATEGIES FOR IMAGE-BASED CONSTRUCTION SITE MONITORING
Directory of Open Access Journals (Sweden)
S. Tuttas
2016-06-01
Full Text Available Construction site monitoring is an essential task for keeping track of the ongoing construction work and providing up-to-date information for a Building Information Model (BIM. The BIM contains the as-planned states (geometry, schedule, costs, ... of a construction project. For updating, the as-built state has to be acquired repeatedly and compared to the as-planned state. In the approach presented here, a 3D representation of the as-built state is calculated from photogrammetric images using multi-view stereo reconstruction. On construction sites one has to cope with several difficulties like security aspects, limited accessibility, occlusions or construction activity. Different acquisition strategies and techniques, namely (i terrestrial acquisition with a hand-held camera, (ii aerial acquisition using a Unmanned Aerial Vehicle (UAV and (iii acquisition using a fixed stereo camera pair at the boom of the crane, are tested on three test sites. They are assessed considering the special needs for the monitoring tasks and limitations on construction sites. The three scenarios are evaluated based on the ability of automation, the required effort for acquisition, the necessary equipment and its maintaining, disturbance of the construction works, and on the accuracy and completeness of the resulting point clouds. Based on the experiences during the test cases the following conclusions can be drawn: Terrestrial acquisition has the lowest requirements on the device setup but lacks on automation and coverage. The crane camera shows the lowest flexibility but the highest grade of automation. The UAV approach can provide the best coverage by combining nadir and oblique views, but can be limited by obstacles and security aspects. The accuracy of the point clouds is evaluated based on plane fitting of selected building parts. The RMS errors of the fitted parts range from 1 to a few cm for the UAV and the hand-held scenario. First results show that the crane
Perspective information in the cockpit as a target acquisition aid
Breda, L. van; Veltman, H.A.
1998-01-01
In a simulator experiment, the potential benefits of perspective radar displays for situation awareness support were investigated. A target acquisition task was used in which fighter pilots were required to locate and intercept a target. The pilots were supported by a conventional plan-view radar
Acquisition of German Pluralization Rules in Monolingual and Multilingual Children
Zaretsky, Eugen; Lange, Benjamin P.; Euler, Harald A.; Neumann, Katrin
2013-01-01
Existing studies on plural acquisition in German have relied on small samples and thus hardly deliver generalizable and differentiated results. Here, overgeneralizations of certain plural allomorphs and other tendencies in the acquisition of German plural markers are described on the basis of test data from 7,394 3- to 5-year-old monolingual…
Workforce Planning in Complex Organizations
National Research Council Canada - National Science Library
2004-01-01
...) civilian acquisition workforces. The greater need for workforce planning is expected to arise from an unusually heavy workforce turnover, itself due to a large number of expected retirements among older employees in a workforce...
Event Handler II: a fast, programmable, CAMAC-coupled data acquisition interface
International Nuclear Information System (INIS)
Hensley, D.C.
1979-01-01
The architecture of the Event Handler II, a fast, programmable data acquisition interface linked to and through CAMAC is described. The special features of this interface make it a powerful tool in implementing data acquisition systems for experiments in nuclear physics. 1 figure, 1 table
Simulation Based Acquisition for NASA's Office of Exploration Systems
Hale, Joe
2004-01-01
In January 2004, President George W. Bush unveiled his vision for NASA to advance U.S. scientific, security, and economic interests through a robust space exploration program. This vision includes the goal to extend human presence across the solar system, starting with a human return to the Moon no later than 2020, in preparation for human exploration of Mars and other destinations. In response to this vision, NASA has created the Office of Exploration Systems (OExS) to develop the innovative technologies, knowledge, and infrastructures to explore and support decisions about human exploration destinations, including the development of a new Crew Exploration Vehicle (CEV). Within the OExS organization, NASA is implementing Simulation Based Acquisition (SBA), a robust Modeling & Simulation (M&S) environment integrated across all acquisition phases and programs/teams, to make the realization of the President s vision more certain. Executed properly, SBA will foster better informed, timelier, and more defensible decisions throughout the acquisition life cycle. By doing so, SBA will improve the quality of NASA systems and speed their development, at less cost and risk than would otherwise be the case. SBA is a comprehensive, Enterprise-wide endeavor that necessitates an evolved culture, a revised spiral acquisition process, and an infrastructure of advanced Information Technology (IT) capabilities. SBA encompasses all project phases (from requirements analysis and concept formulation through design, manufacture, training, and operations), professional disciplines, and activities that can benefit from employing SBA capabilities. SBA capabilities include: developing and assessing system concepts and designs; planning manufacturing, assembly, transport, and launch; training crews, maintainers, launch personnel, and controllers; planning and monitoring missions; responding to emergencies by evaluating effects and exploring solutions; and communicating across the OEx
MDSplus data acquisition system
International Nuclear Information System (INIS)
Stillerman, J.A.; Fredian, T.W.; Klare, K.; Manduchi, G.
1997-01-01
MDSplus, a tree based, distributed data acquisition system, was developed in collaboration with the ZTH Group at Los Alamos National Lab and the RFX Group at CNR in Padua, Italy. It is currently in use at MIT, RFX in Padua, TCV at EPFL in Lausanne, and KBSI in South Korea. MDSplus is made up of a set of X/motif based tools for data acquisition and display, as well as diagnostic configuration and management. It is based on a hierarchical experiment description which completely describes the data acquisition and analysis tasks and contains the results from these operations. These tools were designed to operate in a distributed, client/server environment with multiple concurrent readers and writers to the data store. While usually used over a Local Area Network, these tools can be used over the Internet to provide access for remote diagnosticians and even machine operators. An interface to a relational database is provided for storage and management of processed data. IDL is used as the primary data analysis and visualization tool. IDL is a registered trademark of Research Systems Inc. copyright 1996 American Institute of Physics
Competition under capacitated dynamic lot-sizing with capacity acquisition
DEFF Research Database (Denmark)
Li, Hongyan; Meissner, Joern
2011-01-01
Lot-sizing and capacity planning are important supply chain decisions, and competition and cooperation affect the performance of these decisions. In this paper, we look into the dynamic lot-sizing and resource competition problem of an industry consisting of multiple firms. A capacity competition...... production setup, along with inventory carrying costs. The individual production lots of each firm are limited by a constant capacity restriction, which is purchased up front for the planning horizon. The capacity can be purchased from a spot market, and the capacity acquisition cost fluctuates...
VME-Real-Time Data Acquisition for the Ultracryogenic Gravitational Antenna of the Third Generation
Energy Technology Data Exchange (ETDEWEB)
Mazzitelli, G. [Istituto Nazionale di Fisica Nucleare, Frascati (Italy). Lab. Nazionale di Frascati
1996-05-01
It is described a new design of the front-end electronics for the data acquisition of NAUTILUS, the first ultra cryogenic resonant gravitational wave detector, operating in the INFN National Laboratories of Frascati. The improved sensitivity of this kind of detector poses new requirements on the data acquisition, as more speed, amplitude and timing accuracy are needed. In this work it is discussed the result obtained with a new front-end configuration based on VME standard for a data acquisition rate of 5kHz (present rate 220 Hz). Is it also described the data acquisition system for the cosmic ray telescope assembled around NAUTILUS and the timing system of both the components.
Versatile data acquisition system and the ISOL facility TRISTAN
International Nuclear Information System (INIS)
Gill, R.L.; Stelts, M.L.; Chrien, R.E.; Manzella, V.; Liou, H.I.; Shostak, S.
1980-01-01
The on-line mass separator, TRISTAN, is located at Brookhaven's High Flux Beam Reactor. A Nielsen-type ion source, which can contain up to 8g. of 235 U in an external beam with a flux of approx. 2 x 10 9 n/cm 2 /sec is used to generate short-lived fission products. A Users Group has been formed to coordinate research between University groups and BNL. Developments planned for TRISTAN include FEBIAD, surface ionization and negative-surface ionization-type ion sources, and a He-jet system as well as construction of new experimental facilities. An off-line separator, ISTU, is available for the development program. A versatile, modular data acquisition system to service experiments on TRISTAN and other nuclear research facilities at the HFBR using Camac interfacing is described. Standard, commercially-available electronic instruments and computer programs, such as FORTRAN and system routines, are used throughout. Simple interfaces have been built to adapt non-Camac equipment to Camac input registers
The MicroVAX-based data acquisition system for D0
International Nuclear Information System (INIS)
Cutts, D.; Hoftun, J.S.; McLean, J.; Johnson, C.R.; Zeller, R.T.
1987-01-01
A large array of Micro VAX computers will be used for high-speed data acquisition and online filtering in the D0 experiment at Fermi National Laboratory. Described is this system, as well as several smaller data acquisition systems now operational, with particular emphasis on the control and communication software. The computers in this array will run under VAXELN
Data acquisition software for DIRAC experiment
International Nuclear Information System (INIS)
Ol'shevskij, V.G.; Trusov, S.V.
2000-01-01
The structure and basic processes of data acquisition software of DIRAC experiment for the measurement of π + π - atom life-time are described. The experiment is running on PS accelerator of CERN. The developed software allows one to accept, record and distribute to consumers up to 3 Mbytes of data in one accelerator supercycle of 14.4 s duration. The described system is used successfully in the DIRAC experiment starting from 1998 year
Data acquisition software for DIRAC experiment
Olshevsky, V.; Trusov, S.
2001-08-01
The structure and basic processes of data acquisition software of the DIRAC experiment for the measurement of π +π - atom lifetime are described. The experiment is running on the PS accelerator of CERN. The developed software allows one to accept, record and distribute up to 3 Mbytes of data to consumers in one accelerator supercycle of 14.4 s duration. The described system is successfully in use in the experiment since its startup in 1998.
Data acquisition software for DIRAC experiment
International Nuclear Information System (INIS)
Olshevsky, V.; Trusov, S.
2001-01-01
The structure and basic processes of data acquisition software of the DIRAC experiment for the measurement of π + π - atom lifetime are described. The experiment is running on the PS accelerator of CERN. The developed software allows one to accept, record and distribute up to 3 Mbytes of data to consumers in one accelerator supercycle of 14.4 s duration. The described system is successfully in use in the experiment since its startup in 1998
Use of Geographic Information Systems for Planning HIV Prevention Interventions for High-Risk Youths
Geanuracos, Catherine G.; Cunningham, Shayna D.; Weiss, George; Forte, Draco; Henry Reid, Lisa M.; Ellen, Jonathan M.
2007-01-01
Geographic information system (GIS) analysis is an emerging tool for public health intervention planning. Connect to Protect, a researcher–community collaboration working in 15 cities to reduce HIV infection among youths, developed GIS databases of local health, crime, and demographic data to evaluate the geographic epidemiology of sexually transmitted infections and HIV risk among adolescents. We describe the process and problems of data acquisition, analysis, and mapping in the development of structural interventions, demonstrating how program planners can use this technology to inform and improve planning decisions. The Connect to Protect project’s experience suggests strategies for incorporating public data and GIS technology into the next generation of public health interventions. PMID:17901452
Ion implantation data acquisition system
International Nuclear Information System (INIS)
Struttmann, D.A.; Anderl, R.A.
1989-01-01
This paper describes a data acquisition system developed for hydrogen ion-driven permeation experiments for materials relevant to fusion technology. The system consists of an IMB PC-AT, CAMAC interface to diagnostic instrumentation and custom-developed software (BASIC) to provide time-history information for signals from several instruments including three quadrupole mass spectrometers. 4 refs., 5 figs
Music and Early Language Acquisition
Brandt, Anthony; Gebrian, Molly; Slevc, L. Robert
2012-01-01
Language is typically viewed as fundamental to human intelligence. Music, while recognized as a human universal, is often treated as an ancillary ability – one dependent on or derivative of language. In contrast, we argue that it is more productive from a developmental perspective to describe spoken language as a special type of music. A review of existing studies presents a compelling case that musical hearing and ability is essential to language acquisition. In addition, we challenge the prevailing view that music cognition matures more slowly than language and is more difficult; instead, we argue that music learning matches the speed and effort of language acquisition. We conclude that music merits a central place in our understanding of human development. PMID:22973254
International Nuclear Information System (INIS)
Perez Velasquez, Reytel; Alvarez Zaldivar, Junior; Gonzalez Lopez, Nadia
2009-01-01
For over 30 years in the department of Radiotherapy of the Lenin Hospital has been doing conventional radiotherapy. In this paper we describe the dose planning procedure for patients with prostate cancer with 3D-CRT in the MIRS RTPS 3.0. The work ranges from imaging in the TAC including quality control of this, the definition of bodies radio therapists medical risk to the data to be transferred to processing machine. With this procedure we have established guidelines for planning 3D-CRT treatments for other locations. (author)
49 CFR 1106.4 - The Safety Integration Plan process.
2010-10-01
... 49 Transportation 8 2010-10-01 2010-10-01 false The Safety Integration Plan process. 1106.4 Section 1106.4 Transportation Other Regulations Relating to Transportation (Continued) SURFACE... CONSIDERATION OF SAFETY INTEGRATION PLANS IN CASES INVOLVING RAILROAD CONSOLIDATIONS, MERGERS, AND ACQUISITIONS...
The acquisition system for Tore Supra 1000 s discharges
International Nuclear Information System (INIS)
Guillerminet, B.; How, J.
2000-01-01
Long duration discharges are planned for Tore Supra in the near future. A study has been made to detect and correct all the possible limitations of the data acquisition system. Results and analysis of a few 1000 s 'dry-run' test pulses are presented in this paper as well as the solutions foreseen for Tore Supra
Progress on the data acquisition system at NSCL
International Nuclear Information System (INIS)
Fox, R.; Au, R.; Glynn, T.; Pollack, B.; Vander Mulen, A.
1985-01-01
We report on the progress made in data acquisition software development. Specifically, a unique generalized data routing scheme has been developed which allows user online analysis programs to be safely integrated into the acquisition system without endangering data sent to event recording devices. We describe the structure of the system. Performance is discussed and throughput calculated from it. User experience with the system is also discussed. We show how this routing system may easily be adapted to loosely coupled multiprocessor systems
Plans for characterization of the potential geologic repository site at Yucca Mountain, Nevada
International Nuclear Information System (INIS)
Dobson, D.C.; Blanchard, M.B.; Voegele, M.D.; Younker, J.L.
1990-01-01
Site investigations in the vicinity of the potential repository site at Yucca Mountain, Nevada, have occurred for many years. Although information from previous site investigations was adequate to support preliminary evaluations by the US Department of Energy (DOE) in the Environmental Assessment and to develop conceptual repository and waste package designs, this information is insufficient to proceed to the advanced designs and performance assessments required for the license application to the US Nuclear Regulatory Commission (NRC). Therefore, intensive site characterization is planned, as described in the December 1988 Site Characterization Plan (SCP). The data acquisition activities described in the SCP are focused on obtaining information to allow evaluations of the natural and engineered barriers considered potentially relevant to repository performance. The site data base must be adequate to allow predictions of the range of expected variation in geologic conditions over the next 10,000 years, as well as predictions of the probabilities for catastrophic geologic events that could affect repository performance. 4 refs., 4 figs
Defense Resource Management Studies: Introduction to Capability and Acquisition Planning Processes
2010-08-01
Evaluation Plans ( BEPs ) Establishes how the MoD approved, procurement action will proceed – Dates for requesting and receiving bids – Evaluation period...Proposed Bid and Evaluation Plan ( BEP ) Next chart highlights the intended process and products Flag Button BLOCK 6 8 Intended Process and Products...Funding Level and Source Circular of Requirements (COR) with Key Performance Parameters (KPPs) Bid and Evaluation Plan ( BEP ) A B C D E D1 D2 D3
Acquisition and tracking for underwater optical communications
Williams, Andrew J.; Laycock, Leslie L.; Griffith, Michael S.; McCarthy, Andrew G.; Rowe, Duncan P.
2017-10-01
There is a growing requirement to transfer large volumes of data between underwater platforms. As seawater is transmissive in the visible band, underwater optical communications is an active area of interest since it offers the potential for power efficient, covert and high bandwidth datalinks at short to medium ranges. Short range systems have been successfully demonstrated using sources with low directionality. To realise higher data rates and/or longer ranges, the use of more efficient directional beams is required; by necessity, these must be sufficiently aligned to achieve the required link margin. For mobile platforms, the acquisition and tracking of each node is therefore critical in order to establish and maintain an optical datalink. This paper describes work undertaken to demonstrate acquisition and tracking in a 3D underwater environment. A range of optical sources, beam steering technologies, and tracking sensors have been assessed for suitability. A novel scanning strategy exploiting variable beam divergence was developed to provide robust acquisition whilst minimising acquisition time. A prototype system was assembled and demonstrated in a large water tank. This utilised custom quadrant detectors based on Silicon PhotoMultiplier (SiPM) arrays for fine tracking, and a Wide Field of View (WFoV) sCMOS camera for link acquisition. Fluidic lenses provided dynamic control of beam divergence, and AC modulation/filtering enabled background rejection. The system successfully demonstrated robust optical acquisition and tracking between two nodes with only nanowatt received optical powers. The acquisition time was shown to be dependent on the initial conditions and the transmitted optical power.
International Nuclear Information System (INIS)
Lemeshewky, W.; Macaluso, C.; Smith, P.; Teer, B.
1998-05-01
The Department of Energy has the responsibility for the shipment of spent nuclear fuel (SNF) from commercial reactors to a Federal facility for storage and/or disposal. DOE has developed a strategy for a market driven approach for the acquisition of transportation services and equipment which will maximize the participation of private industry. To implement this strategy, DOE is planning to issue a Request for Proposal (RFP) for the provision of the required services and equipment to accept SNF from the utilities and transport the SNF to a Federal facility. The paper discusses this strategy and describes the RFP
Data acquisition software for DIRAC experiment
Olshevsky, V G
2001-01-01
The structure and basic processes of data acquisition software of the DIRAC experiment for the measurement of pi /sup +/ pi /sup -/ atom lifetime are described. The experiment is running on the PS accelerator of CERN. The developed software allows one to accept, record and distribute up to 3 Mbytes of data to consumers in one accelerator supercycle of 14.4 s duration. The described system is successfully in use in the experiment since its startup in 1998. (13 refs).
Removal Action Plan for the Accelerated Retrieval Project for a Described Area within Pit 4
International Nuclear Information System (INIS)
A. M. Tyson
2006-01-01
This Removal Action Plan documents the plan for implementation of the Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action to be performed by the Accelerated Retrieval Project. The focus of the action is the limited excavation and retrieval of selected waste streams from a designated portion of the Radioactive Waste Management Complex Subsurface Disposal Area that are contaminated with volatile organic compounds, isotopes of uranium, or transuranic radionuclides. The selected retrieval area is approximately 0.2 ha (1/2 acre) and is located in the eastern portion of Pit 4. The proposed project is referred to as the Accelerated Retrieval Project. This Removal Action Plan details the major work elements, operations approach, and schedule, and summarizes the environmental, safety and health, and waste management considerations associated with the project
Energy Technology Data Exchange (ETDEWEB)
Minehara, M; Nakagami, K; Tanaka, H [Japan National Oil Corp., Tokyo (Japan). Technology Research Center
1996-10-01
Theory of parameter setting for data acquisition is arranged, mainly as to the seismic generating and receiving geometry. This paper also introduces an example of survey planning for three-dimensional land seismic exploration in progress. For the design of data acquisition, fundamental parameters are firstly determined on the basis of the characteristics of reflection records at a given district, and then, the layout of survey is determined. In this study, information through modeling based on the existing interpretation of geologic structures is also utilized, to reflect them for survey specifications. Land three-dimensional seismic survey was designed. Ground surface of the surveyed area consists of rice fields and hilly regions. The target was a nose-shaped structure in the depth about 2,500 m underground. A survey area of 4km{times}5km was set. Records in the shallow layers could not obtained when near offset was not ensured. Quality control of this distribution was important for grasping the shallow structure required. In this survey, the seismic generating point could be ensured more certainly than initially expected, which resulted in the sufficient security of near offset. 2 refs., 2 figs.
Making operational sense of mergers and acquisitions
Energy Technology Data Exchange (ETDEWEB)
Anderson, J.E.
1999-09-01
Mergers and acquisitions place a new requirement on many utilities. Not only must they be operationally efficient, but they must also be able to effectively manage internal change projects that results in the integration of new and acquired businesses. Evidence from US industry suggests that this is not an easy feat. However, careful planning of integration strategy, as well as taking the proper steps to design, develop, and implement integrated overhead functions, contribute significantly to successful M and A. Fundamentally, this means choosing the right integration organizational structure, picking the right overhead functions for integration, developing complete plans for integration, and thoroughly executing those plans. For the many utilities that are attempting to develop shared services operations, a number of specific steps can be taken to avoid common pitfalls. Key among these is to develop plans in a manner very similar to the establishment of new ventures. Communicating these efforts to the affected staff and garnering executive buy-in are key aspects of the change effort. Ultimately, utilities must track the impacts of these change efforts in cost savings and service quality improvements.
Multiprocessor data acquisition system
International Nuclear Information System (INIS)
Haumann, J.R.; Crawford, R.K.
1987-01-01
A multiprocessor data acquisition system has been built to replace the single processor systems at the Intense Pulsed Neutron Source (IPNS) at Argonne National Laboratory. The multiprocessor system was needed to accommodate the higher data rates at IPNS brought about by improvements in the source and changes in instrument configurations. This paper describes the hardware configuration of the system and the method of task sharing and compares results to the single processor system
Data acquisition system for TBR-1
International Nuclear Information System (INIS)
Fagundes, A.N.
1989-07-01
The data acquisition system of Tokamak TBR-1 has as goal to obtain retrieval signal from diagnostic systems. The final process of storage, register and transfer of the signals is described. The hardware used to convert the signals and its storage and the software developed for the operation are discussed [pt
The data acquisition system for the ANTARES neutrino telescope
International Nuclear Information System (INIS)
Aguilar, J.A.; Albert, A.; Ameli, F.
2007-01-01
The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described
The data acquisition system for the ANTARES neutrino telescope
Energy Technology Data Exchange (ETDEWEB)
Aguilar, J.A. [IFIC, Instituto de Fisica Corpuscular, Edificios Investigacion de Paterna, CSIC, Universitat de Valencia, Apdo. de Correos 22085, 46071 Valencia (Spain); Albert, A. [GRPHE - Groupe de Recherche en Physique des Hautes Energies, Universite de Haute Alsace, 61 Rue Albert Camus, 68093 Mulhouse Cedex (France); Ameli, F. [Dipartimento di Fisica dell' Universita ' La Sapienza' e Sezione INFN, P.le Aldo Moro 2, 00185 Rome (Italy)] (and others)
2007-01-01
The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described.
Final report for fuel acquisition and design of a fast subcritical blanket facility
International Nuclear Information System (INIS)
Clikeman, F.M.; Ott, K.O.
1976-01-01
A summary is presented of work leading to the design of a subcritical facility for the study of fast reactor blankets. Included are activities related to fuel acquisition, design of the facility, and experiment planning
Design of data acquisition system for 2D-ARRAY ionization chamber detector
International Nuclear Information System (INIS)
He Chaohui; Xing Guilai; Wu Zhifang; Wang Zhentao
2012-01-01
The introduction is given on the design and development of data acquisition system for 2D-ARRAY ionization chamber detector, which is used for dose verification of tumor radiotherapy. The paper describes the structure and the principle of the 2D-ARRAY ionization chamber detector system in detail, and focuses on the discussion on the design process of the detector's data acquisition system and the development of data acquisition system which is constituted by preamplifier, preamplifier control board and data acquisition board. The client can setup the parameters of the detector system via TCP/IP and do data processing such as high speed data collection and acquisition, further operation and so on. (authors)
Fast control and data acquisition in the neutral beam test facility
International Nuclear Information System (INIS)
Luchetta, A.; Manduchi, G.; Taliercio, C.
2014-01-01
Highlights: • The paper describes the fast control and data acquisition in the ITER neutral beam test facility. • The usage of real time control in ion beam generation and extraction is proposed. • Real time management of breakdowns is described. • The implementation of event-driven data acquisition is reported. - Abstract: Fast control and data acquisition are required in the ion source test bed of the ITER neutral beam test facility, referred to as SPIDER. Fast control will drive the operation of the power supply systems with particular reference to special asynchronous events, such as the breakdowns. These are short-circuits among grids or between grids and vessel that can occur repeatedly during beam operation. They are normal events and, as such, they will be managed by the fast control system. Cycle time associated to such fast control is down to hundreds of microseconds. Fast data acquisition is required when breakdowns occur. Event-driven data acquisition is triggered in real time by fast control at the occurrence of each breakdown. Pre- and post-event samples are acquired, allowing capturing information on transient phenomena in a whole time-window centered on the event. Sampling rate of event-driven data acquisition is up to 5 MS/s. Fast data acquisition may also be independent of breakdowns as in the case of the cavity ring-down spectroscopy where data chunks are acquired at 100 MS/s in bursts of 1.5 ms every 100 ms and are processed in real time to produce derived measurements. The paper after the description of the SPIDER fast control and data acquisition application will report the system design based on commercially available hardware and the MARTe and MDSplus software frameworks. The results obtained by running a full prototype of the fast control and data acquisition system are also reported and discussed. They demonstrate that all SPIDER fast control and data acquisition requirements can be met in the prototype solution
Fast control and data acquisition in the neutral beam test facility
Energy Technology Data Exchange (ETDEWEB)
Luchetta, A., E-mail: adriano.luchetta@igi.cnr.it; Manduchi, G.; Taliercio, C.
2014-05-15
Highlights: • The paper describes the fast control and data acquisition in the ITER neutral beam test facility. • The usage of real time control in ion beam generation and extraction is proposed. • Real time management of breakdowns is described. • The implementation of event-driven data acquisition is reported. - Abstract: Fast control and data acquisition are required in the ion source test bed of the ITER neutral beam test facility, referred to as SPIDER. Fast control will drive the operation of the power supply systems with particular reference to special asynchronous events, such as the breakdowns. These are short-circuits among grids or between grids and vessel that can occur repeatedly during beam operation. They are normal events and, as such, they will be managed by the fast control system. Cycle time associated to such fast control is down to hundreds of microseconds. Fast data acquisition is required when breakdowns occur. Event-driven data acquisition is triggered in real time by fast control at the occurrence of each breakdown. Pre- and post-event samples are acquired, allowing capturing information on transient phenomena in a whole time-window centered on the event. Sampling rate of event-driven data acquisition is up to 5 MS/s. Fast data acquisition may also be independent of breakdowns as in the case of the cavity ring-down spectroscopy where data chunks are acquired at 100 MS/s in bursts of 1.5 ms every 100 ms and are processed in real time to produce derived measurements. The paper after the description of the SPIDER fast control and data acquisition application will report the system design based on commercially available hardware and the MARTe and MDSplus software frameworks. The results obtained by running a full prototype of the fast control and data acquisition system are also reported and discussed. They demonstrate that all SPIDER fast control and data acquisition requirements can be met in the prototype solution.
Semantic Boggle: A Game for Vocabulary Acquisition
Toma, Irina; Alexandru, Cristina-Elena; Dascalu, Mihai; Dessus, Philippe; Trausan-Matu, Stefan
2017-01-01
Learning a new language is a difficult endeavor, the main encountered problem being vocabulary acquisition. The learning process can be improved through visual representations of coherent contexts, best represented in serious games. The game described in this paper, Semantic Boggle, is a serious
Rad Chem data acquisition chassis users manual
International Nuclear Information System (INIS)
Jones, B.A.
1980-01-01
The Shiva Laser at LLL requires many forms of diagnostics to measure and analyze fusion experiments. This manual describes the operation of a Micro-Processor controlled data acquisition system designed at LLL to measure Neutron Activation during fusion experiments on the Shiva Laser
International Nuclear Information System (INIS)
Jiang Weichun; Zhu Linfan; Zhang Yijun; Xu Kezuo
2010-01-01
It describes a data acquisition system used in one dimension multichannel fast electron energy loss spectrometer, which can work in scan acquisition mode and static acquisition mode. The timing precision of the scan mode is less than 4 μs by utilizing the gated signal generated by data acquisition card DAQ2010 and an AND logic circuit. A timer card PCI8554 is used to synchronize the data acquisition card and the personal computer. The scan voltage supply is controlled by the personal computer through the RS232 interface. The multithreading technology is used in the acquisition software in order to improve the accommodating-err ability of the acquisition system. A satisfactory test result is given. (authors)
International Nuclear Information System (INIS)
Muralidhar, K.R.; Anurupa; Soubhagya; Sudhakar; Shiva; Krishnam Raju, A.; Narayana Murthy, P.
2008-01-01
The commissioning of XIO treatment planning system (TPS) was carried out by Computerized Medical Devices, USA for Siemens and Elekta linear accelerators. The Commissioning and quality assurance of the CMS XIO radiotherapy treatment planning system involves many steps, beginning from beam data acquisition and entry into the computerized TPS, through patient data acquisition, to treatment plan generation and the final transfer of data to the treatment machine and quality assurance of TPS
Mark-II Data Acquisition and Trigger system
International Nuclear Information System (INIS)
Breidenbach, M.
1984-06-01
The Mark-II Data Acquisition and Trigger system requirements and general solution are described. The solution takes advantage of the synchronous crossing times and low event rates of an electron positron collider to permit a very highly multiplexed analog scheme to be effective. The system depends on a two level trigger to operate with acceptable dead time. The trigger, multiplexing, data reduction, calibration, and CAMAC systems are described
Seligman, Linda
1993-01-01
Describes approach to teaching treatment planning that author has used successfully in both seminars and graduate courses. Clarifies nature and importance of systematic treatment planning, then describes context in which treatment planning seems more effectively taught, and concludes with step-by-step plan for teaching treatment planning.…
Multiple multichannel spectra acquisition and processing system with intelligent interface
International Nuclear Information System (INIS)
Chen Ying; Wei Yixiang; Qu Jianshi; Zheng Futang; Xu Shengkui; Xie Yuanming; Qu Xing; Ji Weitong; Qiu Xuehua
1986-01-01
A Multiple multichannel spectra acquisition and processing system with intelligent interface is described. Sixteen spectra measured with various lengths, channel widths, back biases and acquisition times can be identified and collected by the intelligent interface simultaneously while the connected computer is doing data processing. The execution time for the Ge(Li) gamma-ray spectrum analysis software on IBM PC-XT is about 55 seconds
1024-65536 channel nuclear spectrum data acquisition and processing system
Energy Technology Data Exchange (ETDEWEB)
Songjiang, Xia
1987-09-01
A multiscale data acquisition and processing system based on IBM PC/XT microcomputer is described. In this system, not only 1024,2048,4096 single parameter spectrum, but also 128 x 128, 256 x 256 dual parameter spectrum can be acquisited. The interface logic is designed to work at sequential recording DMA mode, the total avergage time for recording each descriptor is 7.5 ..mu..s.
Experience from Tore Supra acquisition system and evolutions
International Nuclear Information System (INIS)
Guillerminet, B.; Buravand, Y.; Chatelier, E.; Leroux, F.
2004-01-01
The Tore Supra tokamak has been upgraded to explore long duration plasma discharges up to 1000s. Since summer 2001, the acquisition system operates in continuous mode apart of the data processing which is still done after the pulse. In the first part, we explore a few solutions to process continuously the data during the pulse, based on parallel processing on a Linux farm and then on a CONDOR system. The second part is devoted to the Web service exposing the Tore Supra operation. In the last part, the VME acquisition system has been redesigned to keep up with the high data rates required by a few diagnostics. The workflow is now distributed among a few computers. At the end, we give the current status of the realisation and the future planning
Real-time data acquisition and processing platform for fusion experiments
International Nuclear Information System (INIS)
Ruiz, M.; Barrera, E.; Lopez, S.; Machon, D.; Vega, J.; Sanchez, E.
2004-01-01
This paper describes the features of the hardware and low-level software of the PXI real-time data acquisition and processing system developed for the TJ-II device located in the Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT) in Madrid. This system fulfills three objectives: (1) to increase processing capabilities of standard data acquisition systems by adding specific processing cards, (2) to acquire and process data in real time with a view to deployment on steady state fusion devices, and (3) to develop the data acquisition and processing applications using graphical languages like LabView
Planning oral narrative tasks: optimizing strategic planning condition through strategy instruction
Directory of Open Access Journals (Sweden)
André Luís Specht
2017-06-01
Full Text Available This article presents the results of a master thesis, which aimed at investigating the impact of strategic planning instruction on the speech performance of 6 L2 Brazilian learners. The participants, Letras-Inglês students, performed three now-and-there picture-cued narrative tasks under three different conditions: (1 no planning, (2 planning before instruction, and (3 planning after instruction. In addition, the participants filled in post-task questionnaires after the performance of each task, aiming at understanding their opinion on the conditions and tasks. Quantitative and qualitative analyses were conducted in order to examine participants’ oral production and perception, respectively. In general, there was no statistical evidence supporting the impact of instruction on participants’ oral planned performance; however, some statistical results approached significance, which may suggest some positive effects. Qualitative analyses provided positive evidence of the impact of strategic planning instruction on participant perception and their use of strategies during planning time. Moreover, the results of this study can contribute to the fields of Second Language Acquisition and Language Pegadogy.
Data Management Standards in Computer-aided Acquisition and Logistic Support (CALS)
Jefferson, David K.
1990-01-01
Viewgraphs and discussion on data management standards in computer-aided acquisition and logistic support (CALS) are presented. CALS is intended to reduce cost, increase quality, and improve timeliness of weapon system acquisition and support by greatly improving the flow of technical information. The phase 2 standards, industrial environment, are discussed. The information resource dictionary system (IRDS) is described.
Data acquisition for FNAL E665
International Nuclear Information System (INIS)
Geesaman, D.F.; Green, M.C.; Kaufman, S.
1989-01-01
The data acquisition system for FNAL E665, an experiment to study deep inelastic muon scattering from nucleons and nuclei, is described. The system is built with the FNAL VAXONLINE and RSX DA building blocks. The structure, capabilities and limitations for data flow, control and monitoring are discussed. 20 refs., 1 fig
Application of tape unit in data acquisition system and its maintenance and trouble shoot
International Nuclear Information System (INIS)
Xing Jianping; Qian Xicheng
1995-01-01
Application of magnetic tape unit in data acquisition system of DEC computer imported from German and its maintenance as well as trouble shoot is described. The system is used for nuclear data acquisition and processing
Disentangling Contributions of Reproductive Tract Infections to HIV Acquisition in African Women
van de Wijgert, Janneke H. H. M.; Morrison, Charles S.; Brown, Joelle; Kwok, Cynthia; van der Pol, Barbara; Chipato, Tsungai; Byamugisha, Josaphat K.; Padian, Nancy; Salata, Robert A.
2009-01-01
Objective: To estimate the effects of reproductive tract infections (RTIs) on HIV acquisition among Zimbabwean and Ugandan women. Methods: A multicenter prospective observational cohort study enrolled 4439 HIV-uninfected women aged 18 to 35 attending family planning clinics in Zimbabwe and Uganda.
Current position on software for the automatic data acquisition system
International Nuclear Information System (INIS)
1988-01-01
This report describes the current concepts for software to control the operation of the Automatic Data Acquisition System (ADAS) proposed for the Deaf Smith County, Texas, Exploratory Shaft Facility (ESF). The purpose of this report is to provide conceptual details of how the ADAS software will execute the data acquisition function, and how the software will make collected information available to the test personnel, the Data Management Group (DMG), and other authorized users. It is not intended that this report describe all of the ADAS functions in exact detail, but the concepts included herein will form the basis for the formal ADAS functional requirements definition document. 5 refs., 14 figs
National Waste Terminal Storage Program: information management plan. Volume II. Plan description
International Nuclear Information System (INIS)
1977-05-01
A comprehensive information management plan to provide for the systematic processing of large amounts of internally prepared and externally acquired documentation that will accrue to the Office of Waste Isolation (OWI) during the next decade is outlined. The Information Management Plan of the National Waste Terminal Storage (NWTS) Program is based on time proven procedures developed by government and industry for the requirements determination, acquisition, and the administration of documentation. The NWTS Information Management Plan is designed to establish the basis for the planning, development, implemenation, operation and maintenance of the NWTS Information Management System. This plan will help assure that documentation meets required quality standards and that each organization's needs are reflected when soliciting documentation from subcontractors. An example would be the Quality Assurance documentation requirement necessary to comply with eventual NRC licensing regulations. The provisions of the NWTS Information Management Plan will apply to all documentation from OWI contractors, subcontractors, and suppliers, and to OWI organizations for documentation prepared periodically for external dissemination
Front-end data processing the SLD data acquisition system
International Nuclear Information System (INIS)
Nielsen, B.S.
1986-07-01
The data acquisition system for the SLD detector will make extensive use of parallel at the front-end level. Fastbus acquisition modules are being built with powerful processing capabilities for calibration, data reduction and further pre-processing of the large amount of analog data handled by each module. This paper describes the read-out electronics chain and data pre-processing system adapted for most of the detector channels, exemplified by the central drift chamber waveform digitization and processing system
Full information acquisition in scanning probe microscopy and spectroscopy
Energy Technology Data Exchange (ETDEWEB)
Jesse, Stephen; Belianinov, Alex; Kalinin, Sergei V.; Somnath, Suhas
2017-04-04
Apparatus and methods are described for scanning probe microscopy and spectroscopy based on acquisition of full probe response. The full probe response contains valuable information about the probe-sample interaction that is lost in traditional scanning probe microscopy and spectroscopy methods. The full probe response is analyzed post data acquisition using fast Fourier transform and adaptive filtering, as well as multivariate analysis. The full response data is further compressed to retain only statistically significant components before being permanently stored.
COMPUTER-AIDED DATA ACQUISITION FOR COMBUSTION EXPERIMENTS
The article describes the use of computer-aided data acquisition techniques to aid the research program of the Combustion Research Branch (CRB) of the U.S. EPA's Air and Energy Engineering Research Laboratory (AEERL) in Research Triangle Park, NC, in particular on CRB's bench-sca...
International Nuclear Information System (INIS)
Sader, Kasim; Schaffer, Bernhard; Vaughan, Gareth; Brydson, Rik; Brown, Andy; Bleloch, Andrew
2010-01-01
We have developed a novel acquisition methodology for the recording of electron energy loss spectra (EELS) using a scanning transmission electron microscope (STEM): 'Smart Acquisition'. Smart Acquisition allows the independent control of probe scanning procedures and the simultaneous acquisition of analytical signals such as EELS. The original motivation for this work arose from the need to control the electron dose experienced by beam-sensitive specimens whilst maintaining a sufficiently high signal-to-noise ratio in the EEL signal for the extraction of useful analytical information (such as energy loss near edge spectral features) from relatively undamaged areas. We have developed a flexible acquisition framework which separates beam position data input, beam positioning, and EELS acquisition. In this paper we demonstrate the effectiveness of this technique on beam-sensitive thin films of amorphous aluminium trifluoride. Smart Acquisition has been used to expose lines to the electron beam, followed by analysis of the structures created by line-integrating EELS acquisitions, and the results are compared to those derived from a standard EELS linescan. High angle annular dark-field images show clear reductions in damage for the Smart Acquisition areas compared to the conventional linescan, and the Smart Acquisition low loss EEL spectra are more representative of the undamaged material than those derived using a conventional linescan. Atomically resolved EELS of all four elements of CaNdTiO show the high resolution capabilities of Smart Acquisition.
Energy Technology Data Exchange (ETDEWEB)
Sader, Kasim, E-mail: k.sader@leeds.ac.uk [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Schaffer, Bernhard [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Department of Physics and Astronomy, University of Glasgow (United Kingdom); Vaughan, Gareth [Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Brydson, Rik [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Brown, Andy [Institute for Materials Research, University of Leeds, LS2 9JT (United Kingdom); Bleloch, Andrew [SuperSTEM, J block, Daresbury Laboratory, Warrington, Cheshire, WA4 4AD (United Kingdom); Department of Engineering, University of Liverpool, Liverpool (United Kingdom)
2010-07-15
We have developed a novel acquisition methodology for the recording of electron energy loss spectra (EELS) using a scanning transmission electron microscope (STEM): 'Smart Acquisition'. Smart Acquisition allows the independent control of probe scanning procedures and the simultaneous acquisition of analytical signals such as EELS. The original motivation for this work arose from the need to control the electron dose experienced by beam-sensitive specimens whilst maintaining a sufficiently high signal-to-noise ratio in the EEL signal for the extraction of useful analytical information (such as energy loss near edge spectral features) from relatively undamaged areas. We have developed a flexible acquisition framework which separates beam position data input, beam positioning, and EELS acquisition. In this paper we demonstrate the effectiveness of this technique on beam-sensitive thin films of amorphous aluminium trifluoride. Smart Acquisition has been used to expose lines to the electron beam, followed by analysis of the structures created by line-integrating EELS acquisitions, and the results are compared to those derived from a standard EELS linescan. High angle annular dark-field images show clear reductions in damage for the Smart Acquisition areas compared to the conventional linescan, and the Smart Acquisition low loss EEL spectra are more representative of the undamaged material than those derived using a conventional linescan. Atomically resolved EELS of all four elements of CaNdTiO show the high resolution capabilities of Smart Acquisition.
Acquisition of a bodily-tactile language as first language
DEFF Research Database (Denmark)
Ask Larsen, Flemming
2013-01-01
Language acquisition in the bodily-tactile modality is difficult to understand, describe, and support. This chapter advocates a reinterpretation of the gestural and idiosyncratic bodily-tactile communication of people with congenital deafblindness (CDB) in terms of early language acquisition...... towards Tactile Sign Language (TSL). The access to participation in complex TSL culture is crucial for language acquisition. We already know how to transfer the patterns of social interaction into the bodily-tactile modality. This is the fundation on which to build actual linguistic participation. TSL...... as a first language is presently a theoretic possibility. We need more research on how to accommodate TSL to language Development and on how to fit TSL into participation in complex cultural activities....
Approval plans issues and innovations
Katz, Linda S
2013-01-01
How can you, as an acquisition librarians, keep current on the output of hundreds of publishers? The answer, of course, is that you cannot. For over 30 years, approval plans have been used by librarians to acquire current titles, save staff time, and build core collections. Even today, these reasons seem appropriate, as libraries try to maintain up-to-date collections and control personnel and operating budgets. However, as shown in Approval Plans: Issues and Innovations, the use of approval plans is not so simple and straightforward; their use is subject to complex procedures and policies--an
The GRIFFIN data acquisition system
Energy Technology Data Exchange (ETDEWEB)
Garnsworthy, A.B., E-mail: garns@triumf.ca [Physical Sciences Division, TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, Canada V6T 2A3 (Canada); Pearson, C.J.; Bishop, D.; Shaw, B.; Smith, J.K.; Bowry, M. [Physical Sciences Division, TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, Canada V6T 2A3 (Canada); Bildstein, V. [Department of Physics, University of Guelph, 50 Stone Rd E, Guelph, ON, Canada N1G 2W1 (Canada); Hackman, G. [Physical Sciences Division, TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, Canada V6T 2A3 (Canada); Garrett, P.E. [Department of Physics, University of Guelph, 50 Stone Rd E, Guelph, ON, Canada N1G 2W1 (Canada); Linn, Y. [Physical Sciences Division, TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, Canada V6T 2A3 (Canada); Martin, J.-P. [Department of Physics, Université de Montréal, 2900 Boulevard Edouard-Montpetit, Montréal, QC, Canada H3T 1J4 (Canada); Mills, W.J. [Physical Sciences Division, TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, Canada V6T 2A3 (Canada); Svensson, C.E. [Department of Physics, University of Guelph, 50 Stone Rd E, Guelph, ON, Canada N1G 2W1 (Canada)
2017-05-01
Gamma-Ray Infrastructure For Fundamental Investigations of Nuclei, GRIFFIN, is a new experimental facility for radioactive decay studies at the TRIUMF-ISAC laboratory. This article describes the details of the custom designed GRIFFIN digital data acquisition system. The features of the system that will enable high-precision half-life and branching ratio measurements with levels of uncertainty better than 0.05% are described. The system has demonstrated the ability to effectively collect signals from High-purity germanium crystals at counting rates up to 50 kHz while maintaining good energy resolution, detection efficiency and spectral quality.
Language Acquisition without an Acquisition Device
O'Grady, William
2012-01-01
Most explanatory work on first and second language learning assumes the primacy of the acquisition phenomenon itself, and a good deal of work has been devoted to the search for an "acquisition device" that is specific to humans, and perhaps even to language. I will consider the possibility that this strategy is misguided and that language…
A CAMAC-based data acquisition system with a Macintosh interface
International Nuclear Information System (INIS)
McKisson, J.E.; Ely, D.W.; Weisenberger, A.G.; Piercy, R.B.; Haskins, P.S.
1990-01-01
This paper describes a commercially available Macintosh-based data acquisition system and its application to a specific measurement. Based on Computer Aided Measurement and Control (CAMAC) and Nuclear Instrumentation Module (NIM) standard modules, the data acquisition system features a hardware and software interface to a Macintosh computer. This system has been used both for laboratory and remote site measurements, and has been found to perform well as both a highly interactive laboratory system and as a very automatable system for long term data acquisition. Ease in configuration allows for flexibility in fast response applications where a data acquisition system is needed in short time. The system software also supports much of the data analysis and presentation of results with a versatile set of histogram display and manipulation tools. In a recent application, the system controlled data acquisition for two germanium detectors used as part of the whole- spacecraft induced activation measurements of the Long Duration Exposure Facility (LDEF) satellite
Post-Acquisition IT Integration
DEFF Research Database (Denmark)
Henningsson, Stefan; Yetton, Philip
2013-01-01
The extant research on post-acquisition IT integration analyzes how acquirers realize IT-based value in individual acquisitions. However, serial acquirers make 60% of acquisitions. These acquisitions are not isolated events, but are components in growth-by-acquisition programs. To explain how...... serial acquirers realize IT-based value, we develop three propositions on the sequential effects on post-acquisition IT integration in acquisition programs. Their combined explanation is that serial acquirers must have a growth-by-acquisition strategy that includes the capability to improve...... IT integration capabilities, to sustain high alignment across acquisitions and to maintain a scalable IT infrastructure with a flat or decreasing cost structure. We begin the process of validating the three propositions by investigating a longitudinal case study of a growth-by-acquisition program....
International Nuclear Information System (INIS)
Johnson, A.G.; Ringle, J.C.; Anderson, T.V.
1976-01-01
Recent legislative actions within the State of Oregon have had a significant impact upon the OSU TRIGA Emergency Response Plan, and to a lesser extent upon the Physical Security Plan. These state imposed changes will be reviewed in light of existing federal requirements. With the upcoming acquisition of FLIP fuel in August 1976, NRC required several major changes to the existing Physical Security Plan. Within the limitations of public disclosure, these changes will be contrasted to the present plan. (author)
Microprocessor based data acquisition system for Moessbauer spectrometer
International Nuclear Information System (INIS)
Patwardhan, P.K.; Indurkar, V.S.
1981-01-01
A data acquisition system, for Moessbauer spectrometer and other probability distribution spectrum is described. This utilizes the advantages of incorporating a microcomputer for providing a flexible analytical capability and speed of hard wired MCS unit updating channel contents in DMA. Holbourn, Player and Woodhams have recently described a microprocessor controlled Moessbauer spectrometer where microprocessor performs the task of updating channel contents, requiring about 60 micro seconds in interrupt mode. This imposes restrictions on increasing the channel number and on increasing the velocity scan frequency in order to cover higher velocity ranges. The system described in this article performs data acquisition in faster direct memory access. It is a two module system, (1) MCS module (2) Microcomputer module, arranged around a common address, data and control buses. The microcomputer module has an access to the system data during flyback periods and can be programmed for the task of monitor on progess of experiment and as a manipulator of various control operations needed during experiment. The system firmware includes: (1) MONITOR (2) BLOCK-TRANSFER (3) DATA-SMOOTHING (4) DECIMAL-CONVERTER (5) MATH. The scope of this firmware is briefly described. (author)
A planning and scheduling system for the LHC project
Bachy, Gérard; Tarrant, M
1995-01-01
The purpose of this paper is to present modern ways to manage time, resources and progress in a large-scale project. Over the last ten years, new project management techniques and tools have appeared such as concurrent engineering, Continuous Acquisition Lifecycle Support (CALS) and Engineering Data Management System (EDMS). The world downturn of the early 90s influenced project management: increasing constraints on time and budget and more external direction on spending that, for example, requires sophisticated sub-contracting practises. However, the evolution of the software and hardware market makes project control tools cheaper and easier to use. All project groups want to have their scope of work considered as complete projects and to control them themselves. This has several consequences on project staff behaviour concerning project control, and has to be taken into account in every planning process designed today. The system described will be at the heart of the planning and scheduling procedures issue...
Prose Learning for Veterinary Educators: Facilitating Acquisition
Harkness, John E.
1978-01-01
A prose text in veterinary medicine can be arranged and supplemented to facilitate efficient and effective acquisition into short-term memory. Methods include: variation in textual format; relating new information to previous knowledge and future goals; providing specific, test-relevant objectives or introductions, describing mnemonic devices; and…
77 FR 183 - Federal Acquisition Regulation; Preventing Abuse of Interagency Contracts
2012-01-03
... ensure a level playing field in the acquisition planning process, the FAR should be amended to require a... the ability of the Government to leverage its purchasing power, e.g., will it have a negative effect... Act also provides authority for placement of orders between major organizational units within an...
Business planning for license renewal and plant acquisitions. Panel Discussion
International Nuclear Information System (INIS)
Quinn, Edward L.; Grimes, Chris; Walters, Doug; Doroshuk, Barth; Gasper, Joe; Salmon, Harry; Bier, Vicki M.; Hagen, Ronald; Richardson, Charles J.
2001-01-01
Full text of publication follows: Subsequent to Calvert Cliffs and Oconee license renewals in 2000, many plants have not applied for license renewal. Industry is moving to standardize and streamline the process to make it as efficient and effective as possible. At the same time, it is focusing on business practices and competitiveness of nuclear plants in the long-term market-both under regulated and deregulated state formats. In addition, new acquisitions and consolidation in the nuclear market have created several large owner-operators that have specialized business needs. Speakers with experience in the foregoing facets have been selected from the U.S. Nuclear Regulatory Commission, the Nuclear Energy Institute, and utilities to address the business challenges facing them now and in the future. (authors)
B2B Models for DoD Acquisition
2007-07-30
product design, demand forecasting, asset management, and sales and marketing plans 35 Proctor & Gamble’s Private Industrial Network SOURCE: Laudon... B2B Models for DoD Acquisition 30 July 2007 by Magdi N. Kamel, Associate Professor Graduate School of Operational & Information Sciences...number. 1. REPORT DATE 30 JUL 2007 2. REPORT TYPE 3. DATES COVERED 00-00-2007 to 00-00-2007 4. TITLE AND SUBTITLE B2B Models for DoD
Expansion of the data acquisition system for the 20 MV tandem accelerator
International Nuclear Information System (INIS)
Tomita, Yoshiaki
1981-02-01
This report describes an expansion of the program of the data acquisition system for the 20 MV tandem accelerator. By the present expansion it became possible to change the accuisition mode or to use non-standard CAMAC modules with partial modification of the program according to well defined prescriptions. The modification can be made by writing microprograms for the MBD or appending subroutines for the reduced spectra in the LIST mode data acquisition. The new program can handle up to 32 ADC's in the standard LIST mode data acquisition. The present expansion aimed to increase the flexibility in data acquisition. It can also be applied to control experimental devices. (author)
Data acquisition system for radiographic imaging
International Nuclear Information System (INIS)
Lanza, R.C.; Votano, J.R.; Russ, T.
1992-01-01
This patent describes a continuous data acquisition system for radiographic imaging without interrupting acquisition activity the acquisition system. It comprises at least two memory means for storing radiographic data from a radiation detector wherein each of the memory means having a plurality of addressable memory locations and each of the memory means are such that the locations of the memory means correspond to spatial locations in the radiation detector; logic control means for sensing radiographic data transmitted by the radiation detector, for selecting one of the memory means for storage of the data, for transferring data to the selected memory means, and for switching form one memory means to another memory means according to a predefined schedule and according to memory capacity level, the logic control means further comprising a logic device which receives data and increments the contents of locations in a memory means in response to such data; and interface control means for reading data from one or the other memory means when such memory means is not actively acquiring data such that data can be acquired continuously by the system
Work plan for SY Farm Integrated Data Acquisition and Control System (DACS-2a)
International Nuclear Information System (INIS)
Conner, R.P.; Katz, R.S.
1994-01-01
The SY Farm currently has a temporary Data Acquisition ampersand Control System (DACS) housed in a mobile trailer. The system is currently referred to as DACS-1. It was designed and configured to support engineers and scientists conducting the special performance evaluation and testing program for the safety mitigation test equipment located in waste tank 241-SY-101 (101-SY). It is currently being maintained and utilized by engineering personnel to monitor and control the 101-SY mitigation pump activities. Based upon the results of the mitigation testing program, some of the temporary test mitigation equipment (such as mixing pump) will be replaced with longer-term ''operational'' mitigation equipment. This is resulting in new requirements for the Data Acquisition and Control System which will be full-filled by a newer control facility referred to as the DACS-2. A teaming between Westinghouse Hanford Company (WHC) and Los Alamos National Laboratory (LANL) has been established for the SY farm mitigation program in order to develop and implement the ''next generation'' of the data acquisition and control system for the mitigation pump operations. The new system will be configured for use by the tank farm operational personnel. It will support the routine operations necessary for safety mitigation and the future waste retrieval of Project W-211. It is intended to replace the existing DACS-1 and provide the necessary control room space for future integration of W-211
Energy Technology Data Exchange (ETDEWEB)
Spiesser, Ph.
1996-05-01
A user interface has been developed for geometrical and thermal data acquisition, in order to allow calculations of heat diffusion in certain types of electronic circuits such as power hybrids and compact electronic modules, using computerized simulations. Data management, structure and organization, the data acquisition interface program, and variables and sources, are described
International Nuclear Information System (INIS)
Mestrovic, Ante; Otto, Karl; Nichol, Alan; Clark, Brenda G
2009-01-01
The main objective of this manuscript is to propose a new approach to on-line adaptive radiation therapy (ART) in which daily image acquisition, plan adaptation and radiation delivery are integrated together and performed concurrently. A method is described in which on-line ART is performed based on intra-fractional digital tomosynthesis (DTS) images. Intra-fractional DTS images were reconstructed as the gantry rotated between treatment positions. An edge detection algorithm was used to automatically segment the DTS images as the gantry arrived at each treatment position. At each treatment position, radiation was delivered based on the treatment plan re-optimized for the most recent DTS image contours. To investigate the feasibility of this method, a model representing a typical prostate, bladder and rectum was used. To simulate prostate deformations, three clinically relevant, non-rigid deformations (small, medium and large) were modeled by systematically deforming the original anatomy. Using our approach to on-line ART, the original treatment plan was successfully adapted to arrive at a clinically acceptable plan for all three non-rigid deformations. In conclusion, we have proposed a new approach to on-line ART in which plan adaptation is performed based on intra-fractional DTS images. The study findings indicate that this approach can be used to re-optimize the original treatment plan to account for non-rigid anatomical deformations. The advantages of this approach are 1) image acquisition and radiation delivery are integrated in a single gantry rotation around the patient, reducing the treatment time, and 2) intra-fractional DTS images can be used to detect and correct for patient motion prior to the delivery of each beam (intra-fractional patient motion).
Workshop on data acquisition and trigger system simulations for high energy physics
Energy Technology Data Exchange (ETDEWEB)
NONE
1992-12-31
This report discusses the following topics: DAQSIM: A data acquisition system simulation tool; Front end and DCC Simulations for the SDC Straw Tube System; Simulation of Non-Blocklng Data Acquisition Architectures; Simulation Studies of the SDC Data Collection Chip; Correlation Studies of the Data Collection Circuit & The Design of a Queue for this Circuit; Fast Data Compression & Transmission from a Silicon Strip Wafer; Simulation of SCI Protocols in Modsim; Visual Design with vVHDL; Stochastic Simulation of Asynchronous Buffers; SDC Trigger Simulations; Trigger Rates, DAQ & Online Processing at the SSC; Planned Enhancements to MODSEM II & SIMOBJECT -- an Overview -- R.; DAGAR -- A synthesis system; Proposed Silicon Compiler for Physics Applications; Timed -- LOTOS in a PROLOG Environment: an Algebraic language for Simulation; Modeling and Simulation of an Event Builder for High Energy Physics Data Acquisition Systems; A Verilog Simulation for the CDF DAQ; Simulation to Design with Verilog; The DZero Data Acquisition System: Model and Measurements; DZero Trigger Level 1.5 Modeling; Strategies Optimizing Data Load in the DZero Triggers; Simulation of the DZero Level 2 Data Acquisition System; A Fast Method for Calculating DZero Level 1 Jet Trigger Properties and Physics Input to DAQ Studies.
Workshop on data acquisition and trigger system simulations for high energy physics
International Nuclear Information System (INIS)
1992-01-01
This report discusses the following topics: DAQSIM: A data acquisition system simulation tool; Front end and DCC Simulations for the SDC Straw Tube System; Simulation of Non-Blocklng Data Acquisition Architectures; Simulation Studies of the SDC Data Collection Chip; Correlation Studies of the Data Collection Circuit ampersand The Design of a Queue for this Circuit; Fast Data Compression ampersand Transmission from a Silicon Strip Wafer; Simulation of SCI Protocols in Modsim; Visual Design with vVHDL; Stochastic Simulation of Asynchronous Buffers; SDC Trigger Simulations; Trigger Rates, DAQ ampersand Online Processing at the SSC; Planned Enhancements to MODSEM II ampersand SIMOBJECT -- an Overview -- R.; DAGAR -- A synthesis system; Proposed Silicon Compiler for Physics Applications; Timed -- LOTOS in a PROLOG Environment: an Algebraic language for Simulation; Modeling and Simulation of an Event Builder for High Energy Physics Data Acquisition Systems; A Verilog Simulation for the CDF DAQ; Simulation to Design with Verilog; The DZero Data Acquisition System: Model and Measurements; DZero Trigger Level 1.5 Modeling; Strategies Optimizing Data Load in the DZero Triggers; Simulation of the DZero Level 2 Data Acquisition System; A Fast Method for Calculating DZero Level 1 Jet Trigger Properties and Physics Input to DAQ Studies
Data acquisition and test system software
International Nuclear Information System (INIS)
Bourgeois, N.A. Jr.
1979-03-01
Sandia Laboratories has been assigned the task by the Base and Installation Security Systems (BISS) Program Office to develop various aspects of perimeter security systems. One part of this effort involves the development of advanced signal processing techniques to reduce the false and nuisance alarms from sensor systems while improving the probability of intrusion detection. The need existed for both data acquisition hardware and software. Also, the hardware is used to implement and test the signal processing algorithms in real time. The hardware developed for this signal processing task is the Data Acquisition and Test System (DATS). The programs developed for use on DATS are described. The descriptions are taken directly from the documentation included within the source programs themselves
A tomograph VMEbus parallel processing data acquisition system
International Nuclear Information System (INIS)
Atkins, M.S.; Wilkinson, N.A.; Rogers, J.G.
1988-11-01
This paper describes a VME based data acquisition system suitable for the development of Positron Volume Imaging tomographs which use 3-D data for improved image resolution over slice-oriented tomographs. The data acquisition must be flexible enough to accommodate several 3-D reconstruction algorithms; hence, a software-based system is most suitable. Furthermore, because of the increased dimensions and resolution of volume imaging tomographs, the raw data event rate is greater than that of slice-oriented machines. These dual requirements are met by our data acquisition systems. Flexibility is achieved through an array of processors connected over a VMEbus, operating asynchronously and in parallel. High raw data throughput is achieved using a dedicated high speed data transfer device available for the VMEbus. The device can attain a raw data rate of 2.5 million coincidence events per second for raw events per second for raw events which are 64 bits wide. Real-time data acquisition and pre-processing requirements can be met by about forty 20 MHz Motorola 68020/68881 processors
Data acquisition for a large neutrino detector
International Nuclear Information System (INIS)
Ahrens, L.A.; Aronson, S.A.; Connolly, P.L.
1983-01-01
A hierarchical, distributed intelligence data acquisition system which has been used for the past two years in neutrino experiments at Brookhaven National Laboratory is described. Performance characteristics and the nature of problems encountered in bringing the system to maturity are discussed and some generalizations of the experience are suggested
Operation and maintenance manual for data acquisition system of MIDAS
International Nuclear Information System (INIS)
Lee, D. Y.; Park, W. M.; Kim, J. T.; Euh, D. J.
2001-09-01
This report describes an operation and maintenance manual of the data acquisition system and the data processing system for the DVI performance evaluation facility, MIDAS. The data acquisition system is implemented with VXI based system of Kinetic Systems TM , and the data processing PC. This report presents the configuration method and operation procedure for the operator. The modification procedure and method for functional extension and performance modification are also included for the future demand
Directory of Open Access Journals (Sweden)
Aitang Xing
2016-06-01
Full Text Available Purpose: The purpose of this paper is to describe a practical approach to commissioning and quality assurance (QA of a dedicated wide-bore 3 Tesla (3T magnetic resonance imaging (MRI scanner for radiotherapy planning.Methods: A comprehensive commissioning protocol focusing on radiotherapy (RT specific requirements was developed and performed. RT specific tests included: uniformity characteristics of radio-frequency (RF coil, couch top attenuation, geometric distortion, laser and couch movement and an end-to-end radiotherapy treatment planning test. General tests for overall system performance and safety measurements were also performed.Results: The use of pre-scan based intensity correction increased the uniformity from 61.7% to 97% (body flexible coil, from 50% to 90% (large flexible coil and from 51% to 98% (small flexible coil. RT flat top couch decreased signal-to-noise ratio (SNR by an average of 42%. The mean and maximum geometric distortion was found to be 1.25 mm and 4.08 mm for three dimensional (3D corrected image acquisition, 2.07 mm and 7.88 mm for two dimensional (2D corrected image acquisition over 500 mm × 375 mm × 252 mm field of view (FOV. The accuracy of the laser and couch movement was less than ±1 mm. The standard deviation of registration parameters for the end-to-end test was less than 0.41 mm. An on-going QA program was developed to monitor the system’s performance.Conclusion: A number of RT specific tests have been described for commissioning and subsequent performance monitoring of a dedicated MRI simulator (MRI-Sim. These tests have been important in establishing and maintaining its operation for RT planning.
2012-02-24
...DoD is issuing a final rule amending the Defense Federal Acquisition Regulation Supplement to extend the program period for the DoD Test Program for Negotiation of Comprehensive Small Business Subcontracting Plans.
Acquisition of business intelligence from human experience in route planning
Bello Orgaz, Gema; Barrero, David F.; R-Moreno, María D.; Camacho, David
2015-04-01
The logistic sector raises a number of highly challenging problems. Probably one of the most important ones is the shipping planning, i.e. plan the routes that the shippers have to follow to deliver the goods. In this article, we present an artificial intelligence-based solution that has been designed to help a logistic company to improve its routes planning process. In order to achieve this goal, the solution uses the knowledge acquired by the company drivers to propose optimised routes. Hence, the proposed solution gathers the experience of the drivers, processes it and optimises the delivery process. The solution uses data mining to extract knowledge from the company information systems and prepares it for analysis with a case-based reasoning (CBR) algorithm. The CBR obtains critical business intelligence knowledge from the drivers experience that is needed by the planner. The design of the routes is done by a genetic algorithm that, given the processed information, optimises the routes following several objectives, such as minimise the distance or time. Experimentation shows that the proposed approach is able to find routes that improve, on average, the routes made by the human experts.
Preliminary Project Execution Plan for the Remote-Handled Low-Level Waste Disposal Project
Energy Technology Data Exchange (ETDEWEB)
David Duncan
2011-05-01
This preliminary project execution plan (PEP) defines U.S. Department of Energy (DOE) project objectives, roles and responsibilities of project participants, project organization, and controls to effectively manage acquisition of capital funds for construction of a proposed remote-handled low-level waste (LLW) disposal facility at the Idaho National Laboratory (INL). The plan addresses the policies, requirements, and critical decision (CD) responsibilities identified in DOE Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets.' This plan is intended to be a 'living document' that will be periodically updated as the project progresses through the CD process to construction and turnover for operation.
Preliminary Project Execution Plan for the Remote-Handled Low-Level Waste Disposal Project
International Nuclear Information System (INIS)
Duncan, David
2011-01-01
This preliminary project execution plan (PEP) defines U.S. Department of Energy (DOE) project objectives, roles and responsibilities of project participants, project organization, and controls to effectively manage acquisition of capital funds for construction of a proposed remote-handled low-level waste (LLW) disposal facility at the Idaho National Laboratory (INL). The plan addresses the policies, requirements, and critical decision (CD) responsibilities identified in DOE Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets.' This plan is intended to be a 'living document' that will be periodically updated as the project progresses through the CD process to construction and turnover for operation.
Optimal Acquisition and Inventory Control for a Remanufacturing System
Directory of Open Access Journals (Sweden)
Zhigang Jiang
2013-01-01
Full Text Available Optimal acquisition and inventory control can often make the difference between successful and unsuccessful remanufacturing. However, there is a greater degree of uncertainty and complexity in a remanufacturing system, which leads to a critical need for planning and control models designed to deal with this added uncertainty and complexity. In this paper, a method for optimal acquisition and inventory control of a remanufacturing system is presented. The method considers three inventories, one for returned item and the other for serviceable and recoverable items. Taking the holding cost for returns, recoverable and remanufactured products, remanufacturing cost, disposal cost, and the loss caused by backlog into account, the optimal inventory control model is established to minimize the total costs. Finally, a numerical example is provided to illustrate the proposed methods.
A new data acquisition system for pelletron-LINAC experiments
International Nuclear Information System (INIS)
Ramachandran, K.; Chatterjee, A.; Singh, Sudheer; Jha, K.; Joy, Saju; Behere, A.; Goadgoankar, M.D.
2007-01-01
The LINAC booster facility coupled with Pelletron accelerator at Mumbai and the plans to have large detector arrays such as Indian National Gamma Array, Charged Particle Array, Neutron Array, BaF 2 etc. pose new challenges to have a Data Acquisition system (DAQ) with a throughput an order of magnitude higher than the present CAMAC system. The major limitation of CAMAC readout is the 1μs/word readout time. A new FERA (Fast Encoding and Readout) data acquisition system developed at BARC for the augmentation of the throughput of CAMAC is a readout bus for the CAMAC ADCs. With this FERA DAQ, it is possible to readout CAMAC ADC's at 150 ns/word. This talk will present the new DAQ system used at BARC-TIFR Pelletron Accelerator facility. (author)
In Search of Value Drivers in Mergers and Acquisitions
DEFF Research Database (Denmark)
Rose, Caspar; Sørheim, Daniel; Lerkerød, Magnus
2017-01-01
The international literature on M&As is extensive, but surprisingly little evidence exists for the Nordic countries. This article attempts to fill the gap by studying 184 merger announcements from 1995 to 2014. Our findings differ in a number of ways. “First, we extend the current literature since...... we find that diversifying acquisitions” generate a higher bidder abnormal return compared with focused transactions. A possible explanation is that in diversifying acquisitions acquirers overpay for target firms within their core industry because they overestimate operational synergies...... with excessive free cash flows experience negative returns prior to an announcement. Furthermore, our results imply that a bidder company must be able convincingly to justify an acquisition to the market by communicating the presence of a sound and coherent integration plan....
Patron-driven acquisition at Glasgow School of Art Library
Buri, David
2014-01-01
Reports on a five-month pilot of staff-mediated patron-driven acquisition (PDA) of e-books in a small specialist arts institution. Examines the background to the trial; the selection of platforms and vendors; and the import of e-book records into the catalogue. Presents the results of the pilot; a brief analysis of usage; and an outline of future plans for the further development of the service.
Frasch, Manfred; Leptin, Maria
2000-01-01
Mergers and acquisitions (M&As) are booming a strategy of choice for organizations attempting to maintain a competitive advantage. Previous research on mergers and acquisitions declares that acquirers do not normally benefit from acquisitions. Targets, on the other hand, have a tendency of gaining positive returns in the few days surrounding merger announcements due to several characteristic on the acquisitions deal. The announcement period wealth effect on acquiring firms, however, is as cle...
Aerial robotic data acquisition system
International Nuclear Information System (INIS)
Hofstetter, K.J.; Hayes, D.W.; Pendergast, M.M.
1995-01-01
A small unmanned aerial vehicle (UAV) equipped with sensors for physical and chemical measurements of remote environments, is described. A miniature helicopter airframe is used as a platform for sensor testing and development. The sensor output is integrated with the flight control system for real-time, interactive, data acquisition and analysis. Pre programmed flight missions will be flown with several sensors to demonstrate the cost-effective surveillance capabilities of this new technology. (author) 10 refs
Processability in Scandinavian second language acquisition
DEFF Research Database (Denmark)
Glahn, Esther; Håkansson, Gisela; Hammerberg, Björn
2001-01-01
. The three languages mentioned are very closely related and have the same adjective morphology and subordinate clause syntax. We can, therefore, treat them as one language for the purposes of this study. Three analyses have been carried out: The first follows Pienemann's theory and is concerned only...... with syntactic levels; the second is a semantic analysis of the acquisition of number versus that of gender; the third analysis studies the various kinds of mismatches between the inflection of the noun, the controller, and the adjective. The results are the following: The first test supports PT as it has been...... described by Pienemann. The second analysis shows that there is an acquisitional hierarchy such that number is acquired before gender (in adjectives), and the mismatch analysis raises questions about the fundamental assumptions of the theory....
Incidental Lexicon Acquisition through Playful Interaction
Directory of Open Access Journals (Sweden)
Lukas Wilhelm Ansteeg
2015-02-01
Full Text Available This paper presents an educational game which aids learners with foreign lexicon acquisition while entertaining them at the same time. An overview over existing language learning tools is given, and a general platform for educational games for second language acquisition (SLA is described. It introduces a specific prototype video game which teaches Italian vocabulary to the user. The application puts learning at the core of its game mechanics and combines it with a narrative and role-playing elements. In a user study, the game is compared to two other learning methods with focus on long term retention of vocabulary and enjoyment of the exercise. The game is found to perform within 10% of the efficiency of pure vocabulary learning exercises, while being considerably more enjoyable to the user.
Microcomputer-controlled ultrasonic data acquisition system
International Nuclear Information System (INIS)
Simpson, W.A. Jr.
1978-11-01
The large volume of ultrasonic data generated by computer-aided test procedures has necessitated the development of a mobile, high-speed data acquisition and storage system. This approach offers the decided advantage of on-site data collection and remote data processing. It also utilizes standard, commercially available ultrasonic instrumentation. This system is controlled by an Intel 8080A microprocessor. The MCS80-SDK microcomputer board was chosen, and magnetic tape is used as the storage medium. A detailed description is provided of both the hardware and software developed to interface the magnetic tape storage subsystem to Biomation 8100 and Biomation 805 waveform recorders. A boxcar integrator acquisition system is also described for use when signal averaging becomes necessary. Both assembly language and machine language listings are provided for the software
Collaborative environments for capability-based planning
McQuay, William K.
2005-05-01
Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.
National Research Council Canada - National Science Library
2000-01-01
.... According to the report, the plan should identify the projected armored threat and the projected quantity of all antiarmor weapons, whether fielded or in development, with the purpose of identifying...
40 CFR 51.152 - Contingency plans.
2010-07-01
... FOR PREPARATION, ADOPTION, AND SUBMITTAL OF IMPLEMENTATION PLANS Prevention of Air Pollution Emergency... emission control actions to be taken at each episode stage. (Examples of emission control actions are set...: (1) Prompt acquisition of forecasts of atmospheric stagnation conditions and of updates of such...
A tomograph VMEbus parallel processing data acquisition system
International Nuclear Information System (INIS)
Wilkinson, N.A.; Rogers, J.G.; Atkins, M.S.
1989-01-01
This paper describes a VME based data acquisition system suitable for the development of Positron Volume Imaging tomographs which use 3-D data for improved image resolution over slice-oriented tomographs. the data acquisition must be flexible enough to accommodate several 3-D reconstruction algorithms; hence, a software-based system is most suitable. Furthermore, because of the increased dimensions and resolution of volume imaging tomographs, the raw data event rate is greater than that of slice-oriented machines. These dual requirements are met by our data acquisition system. Flexibility is achieved through an array of processors connected over a VMEbus, operating asynchronously and in parallel. High raw data throughput is achieved using a dedicated high speed data transfer device available for the VMEbus. The device can attain a raw data rate of 2.5 million coincidence events per second for raw events which are 64 bits wide
SAR: A fast computer for Camac data acquisition
International Nuclear Information System (INIS)
Bricaud, B.; Faivre, J.C.; Pain, J.
1979-01-01
This paper describes a special data acquisition and processing facility developed for Nuclear Physics experiments at intermediate energy installed at SATURNE (France) and at CERN (Geneva, Switzerland). Previously, we used a PDP 11/45 computer which was connected to the experiments through a Camac Branch highway. In a typical experiment (340 words per event), the computer limited the data acquisition rate at 4 μsec for each 16-bit transfer and the on-line data reduction at 20 events per second only. The initial goal of this project was to increase these two performances. Previous known acquisition processors were limited by the memory capacity these systems could support. Most of the time the data reduction was done on the host mini computer. Higher memory size can be designed with new fast RAM (Intel 2147) and the data processing can now take place on the front end processor
48 CFR 652.239-70 - Information Technology Security Plan and Accreditation.
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Information Technology... Clauses 652.239-70 Information Technology Security Plan and Accreditation. As prescribed in 639.107-70(a), insert the following provision: Information Technology Security Plan and Accreditation (SEP 2007) All...
48 CFR 1252.239-71 - Information technology security plan and accreditation.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Information technology... Provisions and Clauses 1252.239-71 Information technology security plan and accreditation. As prescribed in (TAR) 48 CFR 1239.70, insert the following provision: Information Technology Security Plan and...
Baiker, M.; Vastenhouw, B.; Branderhorst, W.; Reiber, J.H.C.; Beekman, F.; Lelieveldt, B.P.F.
2009-01-01
Highly focused Micro-SPECT scanners enable the acquisition of functional small animal data with very high-resolution. To acquire a maximum of emitted photons from a specific structure of interest and at the same time minimize the required acquisition time, typically only a small subvolume of the
Baiker, M.; Vastenhouw, B.; Branderhorst, S.W.; Reiber, J.H.C.; Beekman, F.J.; Lelieveld, B.P.F.
2009-01-01
Highly focused Micro-SPECT scanners enable the acquisition of functional small animal data with very high-resolution. To acquire a maximum of emitted photons from a specific structure of interest and at the same time minimize the required acquisition time, typically only a small subvolume of the
International Nuclear Information System (INIS)
Bettinardi, Valentino; Picchio, Maria; Di Muzio, Nadia; Gianolli, Luigi; Gilardi, Maria Carla; Messa, Cristina
2010-01-01
Purpose: To describe the degradation effects produced by respiratory organ and lesion motion on PET/CT images and to define the role of respiratory gated (RG) 4D-PET/CT techniques to compensate for such effects. Methods: Based on the literature and on our own experience, technical recommendations and clinical indications for the use of RG 4D PET/CT have been outlined. Results: RG 4D-PET/CT techniques require a state of the art PET/CT scanner, a respiratory monitoring system and dedicated acquisition and processing protocols. Patient training is particularly important to obtain a regular breathing pattern. An adequate number of phases has to be selected to balance motion compensation and statistical noise. RG 4D PET/CT motion free images may be clinically useful for tumour tissue characterization, monitoring patient treatment and target definition in radiation therapy planning. Conclusions: RG 4D PET/CT is a valuable tool to improve image quality and quantitative accuracy and to assess and measure organ and lesion motion for radiotherapy planning.
Real time data acquisition and processing system software supported by RDOS
International Nuclear Information System (INIS)
Yang Huimin; Chou Gongchun; Hao Shuxiang
1982-01-01
The paper describes a system software supported by RDOS operating system for management and supervision a multiuser nuclear spectrum data acquisition and processing system to be made of NOVA/840 computer. The system has manifold functions including four direct address data acquisition channels. One multi-dimension nuclear data acquisition channel, four scalers and four automatic control entrances. Every channel is used competitively by each user. The system's management and all processing functions are performed by system software. The architecture of the system can renew according to users' requirement with support of the system software.This article explains the logical structure of the system software and discusses some technical keys
A microprocessor based multiscaling data acquisition system for moessbauer spectroscopy
International Nuclear Information System (INIS)
Bohm, C.; Ekdahl, T.
1985-01-01
A microprocessor based data acquisition system is described, which was developed for use in Moessbauer spectroscopy. It is designed to record two spectra simultaneously, one of which could be a calibration spectrum. It is autonomous, but uses a host computer for initialization and permanent storage of data. The host communication software is also described. (Author)
2013-06-17
... and for foreign firms in their supply chains. The U.S. concluded the DTC Treaties with Australia and... respondent commended the Defense Acquisition Regulations (DAR) Council on recognizing the importance of the... established a Management Board to resolve such issues, adopted a detailed management plan, and conducted...
MSFC Doppler Lidar Science experiments and operations plans for 1981 airborne test flight
Fichtl, G. H.; Bilbro, J. W.; Kaufman, J. W.
1981-01-01
The flight experiment and operations plans for the Doppler Lidar System (DLS) are provided. Application of DLS to the study of severe storms and local weather penomena is addressed. Test plans involve 66 hours of flight time. Plans also include ground based severe storm and local weather data acquisition.
The need for speed: informed land acquisitions for conservation in a dynamic property market.
McDonald-Madden, Eve; Bode, Michael; Game, Edward T; Grantham, Hedley; Possingham, Hugh P
2008-11-01
Land acquisition is a common approach to biodiversity conservation but is typically subject to property availability on the public market. Consequently, conservation plans are often unable to be implemented as intended. When properties come on the market, conservation agencies must make a choice: purchase immediately, often without a detailed knowledge of its biodiversity value; survey the parcel and accept the risk that it may be removed from the market during this process; or not purchase and hope a better parcel comes on the market at a later date. We describe both an optimal method, using stochastic dynamic programming, and a simple rule of thumb for making such decisions. The solutions to this problem illustrate how optimal conservation is necessarily dynamic and requires explicit consideration of both the time period allowed for implementation and the availability of properties.
Automated data acquisition technology development:Automated modeling and control development
Romine, Peter L.
1995-01-01
This report documents the completion of, and improvements made to, the software developed for automated data acquisition and automated modeling and control development on the Texas Micro rackmounted PC's. This research was initiated because a need was identified by the Metal Processing Branch of NASA Marshall Space Flight Center for a mobile data acquisition and data analysis system, customized for welding measurement and calibration. Several hardware configurations were evaluated and a PC based system was chosen. The Welding Measurement System (WMS), is a dedicated instrument strickly for use of data acquisition and data analysis. In addition to the data acquisition functions described in this thesis, WMS also supports many functions associated with process control. The hardware and software requirements for an automated acquisition system for welding process parameters, welding equipment checkout, and welding process modeling were determined in 1992. From these recommendations, NASA purchased the necessary hardware and software. The new welding acquisition system is designed to collect welding parameter data and perform analysis to determine the voltage versus current arc-length relationship for VPPA welding. Once the results of this analysis are obtained, they can then be used to develop a RAIL function to control welding startup and shutdown without torch crashing.
A data acquisition system for the wide angle shower apparatus (WASA)
International Nuclear Information System (INIS)
Gustafsson, L.; Carius, S.; Fransson, K.; Sukhanov, A.
1994-01-01
A new data acquisition system based on concepts such as data switches and multiple-processors is described. The main topic is how data coming from a multicrate front-end in CAMAC, VME and FASTBUS are transported over different links to a buffer-matrix data switch and further into a farm of microprocessors. Modularity, scalability and multilevel data monitoring are important parts of the design goals that are presented. The system is intended for use in an experiment searching for rare events where high interaction rates are necessary and where a fast and selective trigger is difficult to define. Other experimental constraints, the trigger logical structure and the performance of the data acquisition are also described
Effect of State-Specific Factors on Acquisition Path Ranking
International Nuclear Information System (INIS)
Vincze, A.; Nemeth, A.
2015-01-01
The ''directed graph analysis'' has been shown to be a promising methodology to implement acquisition path analysis by the IAEA to support the State evaluation process. Based on this methodology a material flow network model has been developed under the Hungarian Support Programme to the IAEA, in which materials in different chemical and physical form can flow through pipes representing declared processes, material transports, diversions or undeclared processes. The ranking of the resulting acquisition paths of the analysis is a key step to facilitate the determination of technical objectives and the planning of safeguards implementation on State-level. These are determined by the attributes of the processes included into the graph and different state-specific factors. In this paper different set of attributes, State-specific factors and their functional combination will be tested for hypothetical case studies. (author)
The on-line data acquisition system for the MHD facility of Frascati
International Nuclear Information System (INIS)
Di Bartolomeo, M.; Papalia, B.; Gay, P.; Panaccione, L.
1975-01-01
An on-line data acquisition system for the MHD facility of the Laboratorio Conversione Diretta at Frascati is described. After a brief description of the MHD facility and of the measurement requirements, the criteria a,d the configuration of the minicomputer-based data acquisition system chosen are presented. Then the general philosophy and the flow-charts of the software implemented are shown, with particular emphasis to the real-time requirements of the measurement system. At last it is illustrated an off-line program, running on a large computer, that elaborates the output data of the data acquisition system
A high-speed CAMAC data acquisition system for PDP-11
International Nuclear Information System (INIS)
Berg, D.M.; Heinicke, P.; Quigg, L.
1985-01-01
This paper describes a high-speed data acquisition system for a PDP-11 running under the RSX-11M operating system. It has been used by several high-energy physics experiments at Fermilab. The system consists of several coordinated tasks which acquire data through a CAMAC interface, log data to magnetic tape, supply data to independent monitoring and analysis tasks (such as RSXMULTI), and perform control functions. A data buffer extending beyond the 18-bit address space of the PDP-11 is implemented using Konelar bank-switchable memory. Supported configurations range from small systems with single data acquisition and analysis tasks on the same processor, to large multi-processor systems with data acquisition on several PDPs and analysis on separate PDPs or VAXs
TECHNOLOGICAL IMPLEMENTATION PLAN
DEFF Research Database (Denmark)
Bellini, Anna
2004-01-01
This document has the purpose to describe the technological implementation plan in the IDEAL project.......This document has the purpose to describe the technological implementation plan in the IDEAL project....
Biomedical signal acquisition, processing and transmission using smartphone
International Nuclear Information System (INIS)
Roncagliolo, Pablo; Arredondo, Luis; Gonzalez, AgustIn
2007-01-01
This article describes technical aspects involved in the programming of a system of acquisition, processing and transmission of biomedical signals by using mobile devices. This task is aligned with the permanent development of new technologies for the diagnosis and sickness treatment, based on the feasibility of measuring continuously different variables as electrocardiographic signals, blood pressure, oxygen concentration, pulse or simply temperature. The contribution of this technology is settled on its portability and low cost, which allows its massive use. Specifically this work analyzes the feasibility of acquisition and the processing of signals from a standard smartphone. Work results allow to state that nowadays these equipments have enough processing capacity to execute signals acquisition systems. These systems along with external servers make it possible to imagine a near future where the possibility of making continuous measures of biomedical variables will not be restricted only to hospitals but will also begin to be more frequently used in the daily life and at home
Biomedical signal acquisition, processing and transmission using smartphone
Energy Technology Data Exchange (ETDEWEB)
Roncagliolo, Pablo [Department of Electronics, Universidad Tecnica Federico Santa Maria, Casilla 110-V, ValparaIso (Chile); Arredondo, Luis [Department of Biomedical Engineering, Universidad de ValparaIso, Casilla 123-V, ValparaIso (Chile); Gonzalez, AgustIn [Department of Electronics, Universidad Tecnica Federico Santa MarIa, Casilla 110-V, ValparaIso (Chile)
2007-11-15
This article describes technical aspects involved in the programming of a system of acquisition, processing and transmission of biomedical signals by using mobile devices. This task is aligned with the permanent development of new technologies for the diagnosis and sickness treatment, based on the feasibility of measuring continuously different variables as electrocardiographic signals, blood pressure, oxygen concentration, pulse or simply temperature. The contribution of this technology is settled on its portability and low cost, which allows its massive use. Specifically this work analyzes the feasibility of acquisition and the processing of signals from a standard smartphone. Work results allow to state that nowadays these equipments have enough processing capacity to execute signals acquisition systems. These systems along with external servers make it possible to imagine a near future where the possibility of making continuous measures of biomedical variables will not be restricted only to hospitals but will also begin to be more frequently used in the daily life and at home.
Biomedical signal acquisition, processing and transmission using smartphone
Roncagliolo, Pablo; Arredondo, Luis; González, Agustín
2007-11-01
This article describes technical aspects involved in the programming of a system of acquisition, processing and transmission of biomedical signals by using mobile devices. This task is aligned with the permanent development of new technologies for the diagnosis and sickness treatment, based on the feasibility of measuring continuously different variables as electrocardiographic signals, blood pressure, oxygen concentration, pulse or simply temperature. The contribution of this technology is settled on its portability and low cost, which allows its massive use. Specifically this work analyzes the feasibility of acquisition and the processing of signals from a standard smartphone. Work results allow to state that nowadays these equipments have enough processing capacity to execute signals acquisition systems. These systems along with external servers make it possible to imagine a near future where the possibility of making continuous measures of biomedical variables will not be restricted only to hospitals but will also begin to be more frequently used in the daily life and at home.
An intelligent data acquisition system for fluid mechanics research
Cantwell, E. R.; Zilliac, G.; Fukunishi, Y.
1989-01-01
This paper describes a novel data acquisition system for use with wind-tunnel probe-based measurements, which incorporates a degree of specific fluid dynamics knowledge into a simple expert system-like control program. The concept was developed with a rudimentary expert system coupled to a probe positioning mechanism operating in a small-scale research wind tunnel. The software consisted of two basic elements, a general-purpose data acquisition system and the rulebased control element to take and analyze data and supplying decisions as to where to measure, how many data points to take, and when to stop. The system was validated in an experiment involving a vortical flow field, showing that it was possible to increase the resolution of the experiment or, alternatively, reduce the total number of data points required, to achieve parity with the results of most conventional data acquisition approaches.
The control and data acquisition system of a laser in-vessel viewing system
International Nuclear Information System (INIS)
Pereira, Rita C.; Cruz, Nuno; Neri, C.; Riva, M.; Correia, C.; Varandas, C.A.F.
2000-01-01
This paper presents the dedicated control and data acquisition system (CADAS) of a new laser in-vessel viewing system that has been developed for inspection purposes in fusion experiments. CADAS is based on a MC68060 microprocessor and on-site developed VME instrumentation. Its main aims are to simultaneously control the laser alignment system as well as the laser beam deflection for in-vessel scanning, acquire a high-resolution image and support real-time data flow rates up to 2 Mbyte/s from the acquisition modules to the hard disk and network. The hardware (modules for control and alignment acquisition, scanning acquisition and monitoring) as well as the three levels of software are described
EWLMII: a measurement and data-acquisition system for radon daughters
Energy Technology Data Exchange (ETDEWEB)
Keefe, D.J.; McDowell, W.P.; Groer, P.G.
1981-01-01
Development of new methods and instruments for the measurement of WL and Rn-daughter concentrations has been in progress for several years. However, efficient methods of data acquisition has not been the primary thrust of this research. If large volumes of data from automated instruments are to be efficiently analyzed, a built in data acquisition system is needed. One such instrument, the EWLMII, is described. The need for accelerated research for the understanding and control of Rn-daughters can be enhanced by such an instrument.
EWLMII: a measurement and data-acquisition system for radon daughters
International Nuclear Information System (INIS)
Keefe, D.J.; McDowell, W.P.; Groer, P.G.
1981-01-01
Development of new methods and instruments for the measurement of WL and Rn-daughter concentrations has been in progress for several years. However, efficient methods of data acquisition has not been the primary thrust of this research. If large volumes of data from automated instruments are to be efficiently analyzed, a built in data acquisition system is needed. One such instrument, the EWLMII, is described. The need for accelerated research for the understanding and control of Rn-daughters can be enhanced by such an instrument
The new WAGR data acquisition scheme
International Nuclear Information System (INIS)
Ellis, W.E.; Leng, J.H.; Smith, I.C.; Smith, M.R.
1976-06-01
The existing WAGR data acquisition equipment was inadequate to meet the requirements introduced by the installation of two additional experimental loops and was in any case due for replacement. A completely new scheme was planned and implemented based on mini-computers, which while preserving all the useful features of the old scheme provided additional flexibility and improved data display. Both the initial objectives of the design and the final implementation are discussed without introducing detailed descriptions of hardware or the programming techniques employed. Although the scheme solves a specific problem the general principles are more widely applicable and could readily be adapted to other data checking and display problems. (author)
Describing and Enhancing Collaboration at the Computer
Directory of Open Access Journals (Sweden)
Ken Beatty
2002-06-01
Full Text Available Computer-based learning materials differ from classroom practice in that they seldom explicitly offer opportunities for collaboration. Despite this, students do collaborate, helping one another through the content and affordances of computer materials. But, in doing so, students meet with challenges. Paradoxically, these challenges can either inspire or discourage learning and second-language acquisition. This paper, based on research with twenty Hong Kong university students in a controlled experiment, evaluates challenges to collaboration at the computer as evidenced by discourse. The students were videotaped and their discourse transcribed and evaluated both qualitatively and quantitatively, according to a set of discourse markers created to describe collaborative, non-collaborative and ambiguous strategies. The paper begins by exploring the differences between collaboration and similar terms such as teamwork and cooperative learning then goes on to define collaboration in the context of computer-assisted learning. It ends by presenting practical suggestions for software designers, teachers and students to enhance collaboration at the computer.
Crystal ball data acquisition system
International Nuclear Information System (INIS)
Chestnut, R.; Kiesling, C.; Bloom, E.; Bulos, F.; Gaiser, J.; Godfrey, G.; Oreglia, M.; Partridge, R.; Peck, C.; Porter, F.; Aschman, D.; Cavali-Sforza, M.; Coyne, D.; Sadrozinski, H.; Kollmann, W.; Richardson, M.
1979-01-01
The data acquisition system for the Crystal Ball project at SLAC is described. A PDP-11/t55 using RSX-11M connected to the SLAC Triplex is the basis of the system. A ''physics pipeline'' allows physicists to write their own equipment-monitoring or physics tasks which require event sampling. As well, an interactive analysis package (MULTI) is in the pipeline. Histogram collection and display on the PDP are implemented using the Triplex histogramming package. Various interactive event displays are also implemented
Organizational Conflict In Local Management Budget Planning In Raja Ampat Regency
Directory of Open Access Journals (Sweden)
Baba
2015-01-01
Full Text Available ABSTRACT Local government leadership in Raja Ampat based on the writers observation yet effectively perform conflict resolution organizations in the area of financial management. This is evident from the acquisition of predicate disclaimer that occur repeatedly. Disclaimer predicate occurs repeatedly in the area of financial management in Raja Ampat because the local government leadership has not been effective in reducing conflicts that have a negative effect on the performance of individuals and the performance of positions in all SKPDs not implementing more effective management strategies in order to moderate the conflict related to disagreements about the task policy and other organizational issues and less effective in stimulating the learning process SKPDs level with regard to financial management area. Based on the above description organizational conflict studies in the area of financial management in Raja Ampat is important and urgent to do. The importance of this study because of financial management in Raja Ampat still face the task of conflict situations and conflict relations in the budget planning. The purpose of this study is to 1 Describe the forms of organizational conflicts in planning budget in Raja Ampat.2 Describe the sources of conflict in the organization of planning budget in Raja Ampat. 3 Analyze the conflict resolution organizations in planning budget in Raja Ampat. Based on several conclusions can be drawn as follows 1In the budget planning are forms of task conflict and relationship conflict. 2 Sources of conflict in the budget planning is the difference in the organizations goals criteria that do not work worth it and the inequality of treatment between sub-units. 3 Conflict resolution is a budget planning by providing an understanding of the meaning-Term Development Plan and the area and ask for advice and input from the Regent to accommodate the pricing to be more flexible to adjust to market conditions and the
New data acquisition system for beam loss monitor used in J-PARC main ring
Satou, K.; Toyama, T.; Kamikubota, N.; Yoshida, S.; Matsushita, J.; Wakita, T.; Sugiyama, M.; Morino, T.
2018-04-01
A new data acquisition system has been developed continually as a part of the development of a new beam loss monitor (BLM) system for the J-PARC main ring. This development includes a newly designed front-end isolation amp that uses photo-couplers and a VME-based new analog-to-digital converter (ADC) system. Compared to the old amp, the new amp has a 10 times higher conversion impedance for the input current to the output voltage; this value is 1 M Ω. Moreover, the bandwidth was improved to from DC to 50 kHz, which is about two orders of magnitude greater than the previously used bandwidth. The theoretical estimations made in this study roughly agree with the frequency response obtained for the new system. The new ADC system uses an on-board field-programmable gate array chip for signal processing. By replacing the firmware of this chip, changes pertaining to future accelerator upgrade plans may be introduced into the new ADC system; in addition, the ADC system can be used in other applications. The sampling speed of the system is 1 MS/s, and it exhibits a 95 dBc spurious-free dynamic range and 16.5 effective number of bits. The obtained waveform and integrated charge data are compared with two reference levels in the ADC system. If the data exceeds the reference level, the system generates an alarm to dump the beams. By using the new data acquisition system, it was proved that the new BLM system shows a wide dynamic range of 160 dB. In this study, the details of the new data acquisition system are described.
48 CFR 552.219-72 - Preparation, Submission, and Negotiation of Subcontracting Plans.
2010-10-01
..., and Negotiation of Subcontracting Plans. 552.219-72 Section 552.219-72 Federal Acquisition Regulations... Text of Provisions and Clauses 552.219-72 Preparation, Submission, and Negotiation of Subcontracting... Negotiation of Subcontracting Plans (JUN 2005) (a) An offeror, other than a small business concern, submitting...
Energy Technology Data Exchange (ETDEWEB)
Misirlioglu, Cem [Technische Univ. Berlin (Germany). Fachgebiet Innovationsoekonomie
2013-07-15
Growth strategies have become an essential component of corporate planning since the onset of market liberalisation and deregulation. The present article analyses the use of mergers and acquisitions as an external market strategy (M and A) in the period from 2000 until 2010. It transpires that the development of M and A has gained momentum and will probably see even greater dynamism in the future as a result of changing political framework conditions as well as further developments in the market for conventional and renewable energies.
Data acquisition for the Sodium Loop Safety Facility experiment P4
International Nuclear Information System (INIS)
Baldwin, R.D.; Kraimer, M.R.; Wilson, R.E.; Gilbert, D.M.
1982-01-01
Data acquisition for the Sodium Loop Safety Facility (SLSF) experiment P4 used three computers for the continuous collection of data and two computers for the routing and displaying of data. Four of these computer systems were located at the Engineering Test Reactor (ETR) site, in Idaho, to access sensor signals from the analog to digital interfaces. The fifth system was located at Argonne National Laboratory (ANL), in Illinois, and was used mainly for display and storage of data. All display computers were connected together using the DECNET software package. The transmission of data was managed over a dedicated phone line using 9600 baud long distance modems. A stand-alone high speed data acquisition system was also used to record data during planned reactor transients
National Spherical Torus Experiment Real Time Plasma Control Data Acquisition Hardware
International Nuclear Information System (INIS)
R.J. Marsala; J. Schneider
2002-01-01
The National Spherical Torus Experiment (NSTX) is currently providing researchers data on low aspect-ratio toroidal plasmas. NSTX's Plasma Control System adjusts the firing angles of thyristor rectifier power supplies, in real time, to control plasma position, shape and density. A Data Acquisition system comprised of off-the-shelf and custom hardware provides the magnetic diagnostics data required in calculating firing angles. This VERSAmodule Eurocard (VME) bus-based system utilizes Front Panel Data Port (FPDP) for high-speed data transfer. Data coming from physically different locations is referenced to several different ground potentials necessitating the need for a custom FPDP multiplexer. This paper discusses the data acquisition system configuration, the in-house designed 4-to-1 FPDP Input Multiplexing Module (FIMM), and future expansion plans
Multi parametric system for the acquisition and processing of nuclear data on a personal computer
International Nuclear Information System (INIS)
Toledo Acosta, R. B.; Osorio Deliz, J. F.; Arista Romeu, E.; Perez Sanchez, R.; Lopez Torres, E.
1997-01-01
A four-parameter Multi parametric System for the acquisition and processing of nuclear data is described. It is characterized for its flexibility and relatively low cost, also guaranteeing a high acquisition capacity. The system allows to be utilized in a multi parametric manner, in pulse height analysis or in any combination of both for parameter. The hardware and the software of the system are described. A general explanation of the operation and the characteristics of the system is offered. (author) [es
L-C Measurement Acquisition Method for Aerospace Systems
Woodard, Stanley E.; Taylor, B. Douglas; Shams, Qamar A.; Fox, Robert L.
2003-01-01
This paper describes a measurement acquisition method for aerospace systems that eliminates the need for sensors to have physical connection to a power source (i.e., no lead wires) or to data acquisition equipment. Furthermore, the method does not require the sensors to be in proximity to any form of acquisition hardware. Multiple sensors can be interrogated using this method. The sensors consist of a capacitor, C(p), whose capacitance changes with changes to a physical property, p, electrically connected to an inductor, L. The method uses an antenna to broadcast electromagnetic energy that electrically excites one or more inductive-capacitive sensors via Faraday induction. This method facilitates measurements that were not previously possible because there was no practical means of providing power and data acquisition electrical connections to a sensor. Unlike traditional sensors, which measure only a single physical property, the manner in which the sensing element is interrogated simultaneously allows measurement of at least two unrelated physical properties (e.g., displacement rate and fluid level) by using each constituent of the L-C element. The key to using the method for aerospace applications is to increase the distance between the L-C elements and interrogating antenna; develop all key components to be non-obtrusive and to develop sensing elements that can easily be implemented. Techniques that have resulted in increased distance between antenna and sensor will be presented. Fluid-level measurements and pressure measurements using the acquisition method are demonstrated in the paper.
International Nuclear Information System (INIS)
Saidi, Farid; Chambe, Jacques; Courcy, Georges.
1977-05-01
The data acquisitions must be done in real time. Here, they are made, by fast ADC of the electric charge contained in a sampling pulse. The CAMAC module which permits 32 acquisitions simultaneously is described [fr
Data acquisition and treatment unit for use in nuclear medicine
Energy Technology Data Exchange (ETDEWEB)
Annaix, C; Prieur, G; Vilayleck, S; Jallet, P [C.H.R., Angers (France)
1981-01-01
Here is below a one-channel data acquisition unit piloted through a minicomputer programmed by means of an advanced language of the Basic type. This unit allows, especially in nuclear medicine, pulse counts from a spectrometer according to a programmed sequence. Moreover, it provides treatment of measures as well as printing and filing of interpreted results. The acquisition unit is linked to the minicomputer through a RS 232 C serial mode, which ensures both easy operation and universal use of the system here described. Accuracy of measurement is also examined.
Prioritizing Acquisition Pathways in the State Level Concept
Energy Technology Data Exchange (ETDEWEB)
Murphy, Chantell L. [Los Alamos National Laboratory; Budlong-Sylvester, Kory [Los Alamos National Laboratory; Pilat, Joseph F. [Los Alamos National Laboratory
2012-06-27
The International Atomic Energy Agency's (IAEA) Department of Safeguards has launched a project to further develop the State-level concept for the planning, implementation, and evaluation of safeguards activities. In order to further evolve the safeguards system an emphasis is placed on integrating inspection-related activities and the State evaluation process to draw safeguards conclusions in the most efficient way. The credible implementation of acquisition pathway analysis is central to the success of the IAEA's State-level concept. NNSA's Office of Nuclear Safeguards and Security (NA-241) The Next Generation Safeguards Initiative (NGSI) is sponsoring Los Alamos National Laboratory (LANL) to produce a study that will examine the use of acquisition pathway analysis in: (1) Developing a State-specific, State-level approach (SLA) and Annual Implementation Plan (AIP); (2) Maximizing the utility of the physical model; and (3) Supporting resource allocation decisions through a pathway prioritization. To deal with the challenge of developing an effective and efficient SLA, this study looks at: (1) Prioritizing proliferation pathways based on an assessment of a State's capabilities and assumed proliferation strategies; and (2) Relevant State behavior (e.g., transparency, cooperation, etc.) while avoiding subjective judgments about States themselves. The study makes use of case studies and concrete examples in order to illustrate how new concepts and approaches will be implemented, and how they may differ from more traditional safeguards approaches.
On Board Data Acquisition System with Intelligent Transducers for Unmanned Aerial Vehicles
Rochala, Zdzisław
2012-02-01
This report presents conclusions from research project no. ON50900363 conducted at the Mechatronics Department, Military University of Technology in the years 2007-2010. As the main object of the study involved the preparation of a concept and the implementation of an avionics data acquisition system intended for research during flight of unmanned aerial vehicles of the mini class, this article presents a design of an avionics system and describes equipment solutions of a distributed measurement system intended for data acquisition consisting of intelligent transducers. The data collected during a flight controlled by an operator confirmed proper operation of the individual components of the data acquisition system.
Data Acquisition System Based in MDAS Unit for the FEBEX Project
International Nuclear Information System (INIS)
Alberdi, J.; Barcala, J.M.; Navarrete, J.J.; Martin, P.L.
1998-01-01
The engineered barrier concept for the storage of radioactive wastes is being tested at CIEMAT facilities. This document describes the data acquisition system of one of that experiments. (Author) 2 refs
Operation of inspection data acquisition and evaluation system
International Nuclear Information System (INIS)
Takahashi, Yoichi; Harada, Hiroshi; Watanabe, Masayuki; Sakaguchi, Makoto; Ishikawa, Masayuki
2016-01-01
Rokkasho Reprocessing Plant (RRP) is a large scale plant to treat a huge amount of Plutonium significant for safeguards. The LArge SCAle Reprocessing plant safeguards (LASCAR) Forum recommended an effective utilization of unattended verification systems and automated data acquisition system etc. Based on LASCAR recommendation, Nuclear Material Control Center (NMCC) has developed the inspection data acquisition system as the automated data acquisition system from the unattended verification systems (including non-destructive assay equipment, solution monitoring system and surveillance camera). The data gathered from the unattended verification system are provided to the inspection data evaluation system for the State and the IAEA. In this development, redundancy concepts for data transfer line, in order to prevent inspection data missing, were introduced, and the timely confirmation of solution behaver such as material flows and inventories by the solution monitoring can be achieved. Furthermore, for purpose of efficiency of evaluation of inspection activity for the State, NMCC has developed the inspection data evaluation system which operates automated partition of inspection data coming from each verification equipment. Additionally, the inspection data system evaluation can manage the inspection activities and their efforts. These development and operation have been funded by JSGO (Japan Safeguards Office). This paper describes development history and operation of the inspection data acquisition and evaluation system. (author)
International Nuclear Information System (INIS)
Fontenla, D.P.
2008-01-01
All aspects of treatment planning in radiotherapy are discussed in detail. Included are, among others, machine data and their acquisition, photon dose calculations and tests thereof, criteria of acceptability, sources of uncertainties, from 2D to 3D and from 3D to IMRT, dosimetric measurements for RTP validation, frequency of QA tests and suggested tolerances for TPS, time and staff requirements, model based segmentation, multi-dimensional radiotherapy (MD C RT), and biological IMRT process. (P.A.)
International Nuclear Information System (INIS)
Qian Dongbin; Guo Yuhui; Zhang Dacheng; Chinese Academy of Sciences, Beijing; Ma Xinwen; Zhao Zhizheng; Wang Yanyu; Zu Kailing
2006-01-01
A CAMAC data acquisition system for measuring ionization cross section in laser multi-step resonant ionization experiment is described. The number of scalers in the front-end CAMAC can be adjusted by changing the data read-out table files. Both continuous and manual acquisition models are available, and there is a wide adjustable range from 1 ms to 800 s with the acquisition time unit. The long-term stability, Δt/t, for the data acquisition system with an acquisition time unit of 100 s was measured to be better than ±0.01%, thus validating its reliability in long-term online experimental data acquisition. The time response curves for three electrothermal power-meters were also measured by this DAQ system. (authors)
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
An Assessment of Early Competitive Prototyping for Major Defense Acquisition Programs
2016-04-30
Executive ( CAE ). The MDA determines when programs move from one acquisition phase to the next by reviewing program accomplishments at the various...the M113 family of vehicles. The AMPV will come in five variants: general purpose, medical evacuation, medical treatment , mortar carrier and...System (EPS) Program Control and Planning Segment (CAPS). EPS will provide extremely high frequency, jam-resistant, and secure satellite communications
Language acquisition from a biolinguistic perspective.
Crain, Stephen; Koring, Loes; Thornton, Rosalind
2017-10-01
This paper describes the biolinguistic approach to language acquisition. We contrast the biolinguistic approach with a usage-based approach. We argue that the biolinguistic approach is superior because it provides more accurate and more extensive generalizations about the properties of human languages, as well as a better account of how children acquire human languages. To distinguish between these accounts, we focus on how child and adult language differ both in sentence production and in sentence understanding. We argue that the observed differences resist explanation using the cognitive mechanisms that are invoked by the usage-based approach. In contrast, the biolinguistic approach explains the qualitative parametric differences between child and adult language. Explaining how child and adult language differ and demonstrating that children perceive unity despite apparent diversity are two of the hallmarks of the biolinguistic approach to language acquisition. Copyright © 2016 Elsevier Ltd. All rights reserved.
Microcomputer-controlled ultrasonic data acquisition system. [LMFBR
Energy Technology Data Exchange (ETDEWEB)
Simpson, W.A. Jr.
1978-11-01
The large volume of ultrasonic data generated by computer-aided test procedures has necessitated the development of a mobile, high-speed data acquisition and storage system. This approach offers the decided advantage of on-site data collection and remote data processing. It also utilizes standard, commercially available ultrasonic instrumentation. This system is controlled by an Intel 8080A microprocessor. The MCS80-SDK microcomputer board was chosen, and magnetic tape is used as the storage medium. A detailed description is provided of both the hardware and software developed to interface the magnetic tape storage subsystem to Biomation 8100 and Biomation 805 waveform recorders. A boxcar integrator acquisition system is also described for use when signal averaging becomes necessary. Both assembly language and machine language listings are provided for the software.
Patron-driven acquisitions history and best practices
2011-01-01
About 40 percent of the books academic libraries purchase in traditional ways never circulate and another 40 percent circulate fewer than three times. By contrast, patron-driven acquisition allows a library to borrow or buy books only when a patron needs them. In a typical workflow, the library imports bibliographic records into its catalogue at no cost. When a patron finds a patron-driven record in the course of research, a short-term loan can allow him to borrow the book, and the transaction charge to the library will be a small percentage of the list price. Typically, a library will automatically buy a book on a third or fourth use. The contributions in this volume, written by experts, describe the genesis and brief history of patron-driven acquisitions, its current status, and its promise.
CAMAC interface for TPC data-acquisition electronics
International Nuclear Information System (INIS)
Sidman, S.; Olson, S.; Jared, R.
1983-06-01
The Time Projection Chamber (TPC) is a detector used for high-energy physics research at the Stanford PEP Accelerator. TPC requires about 17,000 channels of data acquisition, which samples on command the input to each channel at a 10 MHz rate. This high data rate is made possible by means of Charge Coupled Devices (CCDs), intelligent digitizers, and a sophisticated trigger system. The TPC-CAMAC interface described here was developed to allow experiments of smaller scale than the complete TPC to use the standard data acquisition portion of the TPC electronics, namely the amplifier, CCD and digitizer bins. These three bins, when properly interconnected and controlled by the interface control bin, form a transient digitizer with a depth of 455 samples and a maximum width of 256 channels per bin set
Technology Implementation Plan
DEFF Research Database (Denmark)
Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe
The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential.......The Technology Implementation Plan (TIP) describes the main project results and the intended future use. The TIP is confidential....
CORBA technology in reengineering the FTU data acquisition system
International Nuclear Information System (INIS)
Bertocchi, A.; Buceti, G.; Centioli, C.; Di Muzio, D.; Iannone, F.; Panella, M.; Vitale, V.
2002-01-01
In its early stages, Frascati tokamak upgrade DAS was essentially devoted to acquiring data from experiments in CAMAC standard, using a software system (code and database) entirely written by domestic professionals. In 15 years of life DAS has been growing in size and complexity, still preserving its original structure; at the same time new standards were introduced (VME, PCI) to take into account users' ever increasing demands for amount of data and acquisition frequency with which the existing code couldn't cope. Moreover, machines were getting old and the maintenance became troublesome. Finally, the data archive porting to Unix has definitely shown that the DAS system was ageing and a thorough redesign was needed. The system we are planning to introduce is founded on a standard CORBA bus: (i) to integrate heterogeneous platforms and define a standard layer for interactions between the different acquisition units; (ii) to grant, with open source tools (MySql) and interfaces (Html and Java), unified access to hardware and software configuration data. So, a dedicated PC server, connected via a suitable PCI serial highway driver card, will perform the CAMAC access for all the clients interacting through the CORBA layer. Up to now we have successfully tested CAMAC access, and we designed an acquisition unit, which will be the building block of the new system. The next step will be migrating to Alpha/VMS the software related to CAMAC data acquisition, which has been so far the cornerstone of the whole DAS; it will be completely redesigned to fit the 'acquisition unit' paradigm we have defined. Finally we will have a fully distributed data acquisition system with VME (at present six such units have been operating since 1999) and PCI stations, an Alpha/VMS client of the CAMAC/PC server and any possible platform interacting through a CORBA bus for getting data configuration, synchronisation and data archiving
CORBA technology in reengineering the FTU data acquisition system
Energy Technology Data Exchange (ETDEWEB)
Bertocchi, A; Buceti, G; Centioli, C; Di Muzio, D; Iannone, F.; Panella, M; Vitale, V
2002-06-01
In its early stages, Frascati tokamak upgrade DAS was essentially devoted to acquiring data from experiments in CAMAC standard, using a software system (code and database) entirely written by domestic professionals. In 15 years of life DAS has been growing in size and complexity, still preserving its original structure; at the same time new standards were introduced (VME, PCI) to take into account users' ever increasing demands for amount of data and acquisition frequency with which the existing code couldn't cope. Moreover, machines were getting old and the maintenance became troublesome. Finally, the data archive porting to Unix has definitely shown that the DAS system was ageing and a thorough redesign was needed. The system we are planning to introduce is founded on a standard CORBA bus: (i) to integrate heterogeneous platforms and define a standard layer for interactions between the different acquisition units; (ii) to grant, with open source tools (MySql) and interfaces (Html and Java), unified access to hardware and software configuration data. So, a dedicated PC server, connected via a suitable PCI serial highway driver card, will perform the CAMAC access for all the clients interacting through the CORBA layer. Up to now we have successfully tested CAMAC access, and we designed an acquisition unit, which will be the building block of the new system. The next step will be migrating to Alpha/VMS the software related to CAMAC data acquisition, which has been so far the cornerstone of the whole DAS; it will be completely redesigned to fit the 'acquisition unit' paradigm we have defined. Finally we will have a fully distributed data acquisition system with VME (at present six such units have been operating since 1999) and PCI stations, an Alpha/VMS client of the CAMAC/PC server and any possible platform interacting through a CORBA bus for getting data configuration, synchronisation and data archiving.
Noble, David J; Scoffings, Daniel; Ajithkumar, Thankamma; Williams, Michael V; Jefferies, Sarah J
2016-11-01
There is no consensus approach to covering skull base meningeal reflections-and cerebrospinal fluid (CSF) therein-of the posterior fossa cranial nerves (CNs VII-XII) when planning radiotherapy (RT) for medulloblastoma and ependymoma. We sought to determine whether MRI and specifically fast imaging employing steady-state acquisition (FIESTA) sequences can answer this anatomical question and guide RT planning. 96 posterior fossa FIESTA sequences were reviewed. Following exclusions, measurements were made on the following scans for each foramen respectively (left, right); internal acoustic meatus (IAM) (86, 84), jugular foramen (JF) (83, 85) and hypoglossal canal (HC) (42, 45). A protocol describes measurement procedure. Two observers measured distances for five cases and agreement was assessed. One observer measured all the remaining cases. IAM and JF measurement interobserver variability was compared. Mean measurement difference between observers was -0.275 mm (standard deviation 0.557). IAM and JF measurements were normally distributed. Mean IAM distance was 12.2 mm [95% confidence interval (CI) 8.8-15.6]; JF was 7.3 mm (95% CI 4.0-10.6). The HC was difficult to visualize on many images and data followed a bimodal distribution. Dural reflections of posterior fossa CNs are well demonstrated by FIESTA MRI. Measuring CSF extension into these structures is feasible and robust; mean CSF extension into IAM and JF was measured. We plan further work to assess coverage of these structures with photon and proton RT plans. Advances in knowledge: We have described CSF extension beyond the internal table of the skull into the IAM, JF and HC. Oncologists planning RT for patients with medulloblastoma and ependymoma may use these data to guide contouring.
McCready, John W.
2010-01-01
The purpose of this study was to examine use of decision-making tools and feedback in strategic planning in order to develop a rigorous process that would promote the efficiency of strategic planning for acquisitions in the United States Coast Guard (USCG). Strategic planning is critical to agencies such as the USCG in order to be effective…
SHIVA - A multitask data acquisition system for the Oslo University cyclotron laboratory
International Nuclear Information System (INIS)
Skaali, B.; Haugen, A.; Ingebretsen, F.; Midttun, G.
1983-01-01
The authors describe a general nuclear data acquisition system implemented on a minicomputer using the standard facilities of a real time operating system. The CAMAC data acquisition hardware is controlled by a high speed ADC scanner module. Sorting of multiparameter data is based on a flexible Transformation Of Nuclear Event (TONE) language. The data processing rate, including tape transfer, is several thousand events/s, depending on the complexity of the sorting program
The arison data acquisition and elaboration software package running on Hewlett-Packard minicomputer
International Nuclear Information System (INIS)
Diamantidis, Z.
1987-01-01
In this article, a data acquisition and elaboration system is described consisting in a PCM data acquisition and a spectrum analyser system and their data elaboration package for reactor safety or other general purposes. Measurements on temperature, noise fluctuations of temperature or other noise analysis dynamics, pressure, etc. Time series and their conversion in engineering units and their statistical and frequency analysis is provided
International Nuclear Information System (INIS)
Pfeifer, T.; Ruehle, W.
1982-10-01
This paper describes the setup of a pilotsystem for test and inspection data acquisition within a qualitydata acquisition-system (QDA-System) and the principles how the data transmission system acts. First a general description of the system concept for test- and inspection data acquisition is given and then acquisition-equipments, -components and -systems will be touched. Depending on the structure of the test- and inspection equipment and the termination of the gauge process, different concepts of substations will be described. Based on requirements for serial data-highways used in QDA-systems, the architecture and the operation sequence of the PDV-Bus pilot system will be presented. The detailed description of the data transmission system will be pointed out as well as the implemented system software moduls. The achieved results are shown in a system estimation. (orig.) [de
An acquisition system for CMOS imagers with a genuine 10 Gbit/s bandwidth
International Nuclear Information System (INIS)
Guérin, C.; Mahroug, J.; Tromeur, W.; Houles, J.; Calabria, P.; Barbier, R.
2012-01-01
This paper presents a high data throughput acquisition system for pixel detector readout such as CMOS imagers. This CMOS acquisition board offers a genuine 10 Gbit/s bandwidth to the workstation and can provide an on-line and continuous high frame rate imaging capability. On-line processing can be implemented either on the Data Acquisition Board or on the multi-cores workstation depending on the complexity of the algorithms. The different parts composing the acquisition board have been designed to be used first with a single-photon detector called LUSIPHER (800×800 pixels), developed in our laboratory for scientific applications ranging from nano-photonics to adaptive optics. The architecture of the acquisition board is presented and the performances achieved by the produced boards are described. The future developments (hardware and software) concerning the on-line implementation of algorithms dedicated to single-photon imaging are tackled.
International Nuclear Information System (INIS)
Cirstea, C.D.; Buda, S.I.; Constantin, F.
2005-01-01
This paper deals with a multi parametric acquisition system developed for a four input Analog to Digital Converter working in CAMAC Standard. The acquisition software is built in MS Visual C++ on a standard PC with a USB interface. It has a visual interface which permits Start/Stop of the acquisition, setting the type of acquisition (True/Live time), the time and various menus for primary data acquisition. The spectrum is dynamically visualized with a moving cursor indicating the content and position. The microcontroller PIC16C765 is used for data transfer from ADC to PC; The microcontroller and the software create an embedded system which emulates the CAMAC protocol programming the 4 input ADC for operating modes ('zero suppression', 'addressed' and 'sequential') and handling the data transfers from ADC to its internal memory. From its memory the data is transferred into the PC by the USB interface. The work is in progress. (authors)
International Nuclear Information System (INIS)
Cirstea, D.C.; Buda, S.I.; Constantin, F.
2005-01-01
The topic of this paper deals with a multi parametric acquisition system developed around a four input Analog to Digital Converter working in CAMAC Standard. The acquisition software is built in MS Visual C++ on a standard PC with a USB interface. It has a visual interface which permits Start/Stop of the acquisition, setting the type of acquisition (True/Live time), the time and various menus for primary data acquisition. The spectrum is dynamically visualized with a moving cursor indicating the content and position. The microcontroller PIC16C765 is used for data transfer from ADC to PC; The microcontroller and the software create an embedded system which emulates the CAMAC protocol programming, the 4 input ADC for operating modes ('zero suppression', 'addressed' and 'sequential') and handling the data transfers from ADC to its internal memory. From its memory the data is transferred into the PC by the USB interface. The work is in progress. (authors)
A new compiler for the GANIL Data Acquisition description
International Nuclear Information System (INIS)
Saillant, F.; Raine, B.
1997-01-01
An important feature of the GANIL Data Acquisition System is the description of the experiments by means of a language developed at GANIL. The philosophy is to attribute to each element (parameters, spectra, etc) an operational name which will be used at any level of the system. This language references a library of modules to free the user from the technical details of the hardware. This compiler has been recently entirely re-developed using technologies as the object-oriented language (C++) and object-oriented software development method and tool. This enables us to provide a new functionality or to support a new electronic module within a very short delay and without any deep modification of the application. A new Dynamic Library of Modules has been also developed. Its complete description is available on the GANIL WEB site http://ganinfo.in2p3.fr/acquisition/homepage.html. This new compiler brings a lot of new functionalities, among which the most important is the notion of 'register' whatever the module standard is. All the registers described in the module provider's documentation can now be accessed by their names. Another important new feature is the notion of 'function' that can be executed on a module. Also a set of new instructions has been implemented to execute commands on CAMAC crates. Another possibility of this new compiler is to enable the description of specific interfaces with GANIL Data Acquisition System. This has been used to describe the coupling of the CHIMERA Data Acquisition System with the INDRA one through a shared memory in the VME crate. (authors)
Embedded multi-channel data acquisition system on FPGA for Aditya Tokamak
Energy Technology Data Exchange (ETDEWEB)
Rajpal, Rachana, E-mail: rachana@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Mandaliya, Hitesh, E-mail: hitesh@ipr.res.in [ITER, Cadarache (France); Patel, Jignesh, E-mail: jjp@ipr.res.in [ITER, Cadarache (France); Kumari, Praveena, E-mail: praveena@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Gautam, Pramila, E-mail: pramila@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Raulji, Vismaysinh, E-mail: vismay@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Edappala, Praveenlal, E-mail: praveen@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Pujara, H.D, E-mail: pujara@ipr.res [Institute for Plasma Research, Gandhinagar, Gujarat (India); Jha, R., E-mail: jha@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India)
2016-11-15
Highlights: • 64 channel data acquisition, interface to PC/104 bus, using single board computer. • Integration of all components in single hardware to make it standalone and portable. • Development of application software in Qt on Linux platform for better performance and low cost compared to Windows. • Explored and utilized FPGA resources for hardware interfacing. - Abstract: The 64 channel data acquisition board is designed to meet the future demand of acquisition channels for plasma diagnostics. The inherent features of the board are 16 bit resolution, programmable sampling rate upto 200 kS/s/ch and simultaneous acquisition. To make system embedded and compact, 8 Analog Inputs ADC chip, 4M × 16 bit RAM memory, Field Programmable Gate Arrays, PC/104 platform and single board computer are used. High speed timing control signals for all ADCs and RAMs are generated by FPGA. The system is standalone, portable and interface through Ethernet. The acquisition application is developed in Qt. on Linux platform, in SBC. Due to ethernet connectivity and onboard processing, system can be integrated into Aditya and SST-1 data acquisition system. The performance of hardware is tested on Linux and Windows Embedded OS. The paper describes design, hardware and software architecture, implementation and results of 64 channel DAQ system.
Embedded multi-channel data acquisition system on FPGA for Aditya Tokamak
International Nuclear Information System (INIS)
Rajpal, Rachana; Mandaliya, Hitesh; Patel, Jignesh; Kumari, Praveena; Gautam, Pramila; Raulji, Vismaysinh; Edappala, Praveenlal; Pujara, H.D; Jha, R.
2016-01-01
Highlights: • 64 channel data acquisition, interface to PC/104 bus, using single board computer. • Integration of all components in single hardware to make it standalone and portable. • Development of application software in Qt on Linux platform for better performance and low cost compared to Windows. • Explored and utilized FPGA resources for hardware interfacing. - Abstract: The 64 channel data acquisition board is designed to meet the future demand of acquisition channels for plasma diagnostics. The inherent features of the board are 16 bit resolution, programmable sampling rate upto 200 kS/s/ch and simultaneous acquisition. To make system embedded and compact, 8 Analog Inputs ADC chip, 4M × 16 bit RAM memory, Field Programmable Gate Arrays, PC/104 platform and single board computer are used. High speed timing control signals for all ADCs and RAMs are generated by FPGA. The system is standalone, portable and interface through Ethernet. The acquisition application is developed in Qt. on Linux platform, in SBC. Due to ethernet connectivity and onboard processing, system can be integrated into Aditya and SST-1 data acquisition system. The performance of hardware is tested on Linux and Windows Embedded OS. The paper describes design, hardware and software architecture, implementation and results of 64 channel DAQ system.
The hybrid UNIX controller for real-time data acquisition
International Nuclear Information System (INIS)
Huesman, R.H.; Klein, G.J.; Fleming, T.K.
1996-01-01
The authors describe a hybrid data acquisition architecture integrating a conventional UNIX workstation with CAMAC-based real-time hardware. The system combines the high-level programming simplicity and user interface of a UNIX workstation with the low-level timing control available from conventional real-time hardware. They detail this architecture as it has been implemented for control of the Donner 600-Crystal Positron Tomograph (PET600). Low-level data acquisition is carried out in this system using eight LeCroy 3588 histogrammers, which together after derandomization, acquire events at rates up to 4 MHz, and two dedicated Motorola 6809 microprocessors, which arbitrate fine timing control during acquisition. A SUN Microsystems UNIX workstation is used for high-level control, allowing an easily extensible user interface in an X-Windows environment, as well as real-time communications to the low-level acquisition units. Communication between the high- and low-level units is carried out via a Jorway 73A SCSI-CAMAC crate controller and a serial interface. For this application, the hybrid configuration segments low from high-level control for ease of maintenance and provided a low-cost upgrade from dated high-level control hardware
Comparative accuracy of different techniques in planning radiation therapy of breast cancer
International Nuclear Information System (INIS)
Bignardi, M.; Frata, P.; Barbera, F.; Moretti, R.
1991-01-01
The authors report the results of the analysis of several factors contributing to the accuracy of treatment planning in the radiation therapy of breast cancer. Different techniques (non-radiological vs CT-based) were used for the acquisition of patients' data; different methods (manual vs computerized) were employed for dose calculation. As for geometric parameters describing the external outline and target volume, mean differences were lower than 4%. Switching from a completely manual method to a CT-based one with computerized calculation, a 3.56% mean decrease in the value of reference isodose (p<0.01) was observed, togheter with a 3.87% mean increase in the estimated inhomogeneity (p<0.001). The non-CT-based outline of target volume exhibited geographic missing of inner portions of the target in 8/16 patients. Our results demonstarte that treatment planning procedures can be a significant source of clinically relevant inaccuracy, which may affect treatment outcome and tumor control
Department of Defense Enterprise Requirements and Acquisition Model
2011-06-01
30 Figure 11: ExtendSim Icons ...collected through a series of interviews with space requirements and acquisition personnel from AFSPC Requirements directorate (AFSPC/ A5 ), the Under...of the many ExtendSim® icons are described and illustrated in Figure 11. The “Event/Activity” icon is implemented with a time duration allowing a
DEFF Research Database (Denmark)
Colombo, Massimo G.; Rabbiosi, Larissa
2014-01-01
This paper aims to disentangle the mechanisms through which technological similarity between acquiring and acquired firms influences innovation in horizontal acquisitions. We develop a theoretical model that links technological similarity to: (i) two key aspects of post-acquisition reorganization...... of acquired R&D operations – the rationalization of the R&D operations and the replacement of the R&D top manager, and (ii) two intermediate effects that are closely associated with the post-acquisition innovation performance of the combined firm – improvements in R&D productivity and disruptions in R......&D personnel. We rely on PLS techniques to test our theoretical model using detailed information on 31 horizontal acquisitions in high- and medium-tech industries. Our results indicate that in horizontal acquisitions, technological similarity negatively affects post-acquisition innovation performance...
Reliability and maintainability data acquisition in equipment development tests
International Nuclear Information System (INIS)
Haire, M.J.; Gift, E.H.
1983-10-01
The need for collection of reliability, maintainability, and availability data adds a new dimension to the data acquisition requirements of equipment development tests. This report describes the reliability and maintainability data that are considered necessary to ensure that sufficient and high quality data exist for a comprehensive, quantitative evaluation of equipment and system availability. These necessary data are presented as a set of data collection forms. Three data acquisition forms are discussed: an inventory and technical data form, which is filed by the design engineer when the design is finished or the equipment is received; an event report form, which is completed by the senior test operator at each shutdown; and a maintainability report, which is a collaborative effort between senior operators and lead engineers and is completed on restart. In addition, elements of a reliability, maintainability evaluation program are described. Emphasis is placed on the role of data, its storage, and use in such a program
Lim, Hui W; Wells, Bill; Howard, Sara
2015-01-01
Early child multilingual acquisition is under-explored. Using a cross-sectional study approach, the present research investigates the rate of multilingual phonological acquisition of English-Mandarin-Malay by 64 ethnic Chinese children aged 2;06-4;05 in Malaysia--a multiracial-multilingual country of Asia. The aims of the study are to provide clinical norms for speech development in the multilingual children and to compare multilingual acquisition with monolingual and bilingual acquisition. An innovative multilingual phonological test which adopts well-defined scoring criteria drawing upon local accents of English, Mandarin and Malay is proposed and described in this article. This procedure has been neglected in the few existing Chinese bilingual phonological acquisition studies resulting in peculiar findings. The multilingual children show comparable phonological acquisition milestones to that of monolingual and bilingual peers acquiring the same languages. The implications of the present results are discussed. The present findings contribute to the development of models and theories of child multilingual acquisition.
Robillard, Cassandra M; Kerr, Jeremy T
2017-08-01
High costs of land in agricultural regions warrant spatial prioritization approaches to conservation that explicitly consider land prices to produce protected-area networks that accomplish targets efficiently. However, land-use changes in such regions and delays between plan design and implementation may render optimized plans obsolete before implementation occurs. To measure the shelf life of cost-efficient conservation plans, we simulated a land-acquisition and restoration initiative aimed at conserving species at risk in Canada's farmlands. We accounted for observed changes in land-acquisition costs and in agricultural intensity based on censuses of agriculture taken from 1986 to 2011. For each year of data, we mapped costs and areas of conservation priority designated using Marxan. We compared plans to test for changes through time in the arrangement of high-priority sites and in the total cost of each plan. For acquisition costs, we measured the savings from accounting for prices during site selection. Land-acquisition costs and land-use intensity generally rose over time independent of inflation (24-78%), although rates of change were heterogeneous through space and decreased in some areas. Accounting for spatial variation in land price lowered the cost of conservation plans by 1.73-13.9%, decreased the range of costs by 19-82%, and created unique solutions from which to choose. Despite the rise in plan costs over time, the high conservation priority of particular areas remained consistent. Delaying conservation in these critical areas may compromise what optimized conservation plans can achieve. In the case of Canadian farmland, rapid conservation action is cost-effective, even with moderate levels of uncertainty in how to implement restoration goals. © 2016 Society for Conservation Biology.
Design of device driver program for PCI data acquisition adapters based on WDM of windows 2000
International Nuclear Information System (INIS)
Yuan Weihua; Qiao Weimin; Jing Lan; Zhu Haijun
2003-01-01
The paper describes the design of device driver program for PCI data acquisition adapters based on WDM of Windows 2000. Give an actual example of PCI6208. Now, several data acquisition adapters based in this method are using in national big science engineer HIRFL-CSR. (authors)
National Waste Terminal Storage Program: planning and control plan. Volume II. Plan description
International Nuclear Information System (INIS)
1977-05-01
Objective of the NWTS program planning and control plan is to provide the information necessary for timely and effective OWI management decisions. Purpose is to describe the concepts and techniques that will be utilized by OWI to establish structured, completely planned and controlled technical, cost, and schedule NWTS baselines from which performance or progress can be accurately measured
The acquisition of conditioned responding.
Harris, Justin A
2011-04-01
This report analyzes the acquisition of conditioned responses in rats trained in a magazine approach paradigm. Following the suggestion by Gallistel, Fairhurst, and Balsam (2004), Weibull functions were fitted to the trial-by-trial response rates of individual rats. These showed that the emergence of responding was often delayed, after which the response rate would increase relatively gradually across trials. The fit of the Weibull function to the behavioral data of each rat was equaled by that of a cumulative exponential function incorporating a response threshold. Thus, the growth in conditioning strength on each trial can be modeled by the derivative of the exponential--a difference term of the form used in many models of associative learning (e.g., Rescorla & Wagner, 1972). Further analyses, comparing the acquisition of responding with a continuously reinforced stimulus (CRf) and a partially reinforced stimulus (PRf), provided further evidence in support of the difference term. In conclusion, the results are consistent with conventional models that describe learning as the growth of associative strength, incremented on each trial by an error-correction process.
Jeffrey S. Evans; Andrew T. Hudak; Russ Faux; Alistair M. S. Smith
2009-01-01
Recent years have seen the progression of light detection and ranging (lidar) from the realm of research to operational use in natural resource management. Numerous government agencies, private industries, and public/private stakeholder consortiums are planning or have recently acquired large-scale acquisitions, and a national U.S. lidar acquisition is likely before...
Isolated data acquisition system for high voltage applications
International Nuclear Information System (INIS)
Waitz, A.; Donaldson, A.
1985-06-01
This report describes the design and operation of a microcomputer controlled system for acquisition of both analog and binary data within the high voltage stages of a linac modulator. The system is comprised of a microprocessor Controller which communicates with the remote data Acquisition circuits via an optical bus. The bus, which uses a 1 MHz Manchester II format, is configured as a loop, starting at the Controller, daisy-chaining the remote cards and terminating back at the Controller. Upon receiving a linac timing pulse, the Controller sends addressed commands to the individual remote cards and receives data back. It then passes this data to the linac control system through a Multibus connection. Each remote circuit can return 16 binary sense and 7 (12 bit) analog parameters within 270 us. This speed is possible because of a pipelined design where one word is transmitted while another is being converted. A data conversion cycle is initiated when a remote data acquisition card receives the proper command and address from the controller
Architecture of SPIDER control and data acquisition system
International Nuclear Information System (INIS)
Luchetta, A.; Manduchi, G.; Taliercio, C.; Soppelsa, A.; Barbalace, A.; Paolucci, F.; Sartori, F.; Barbato, P.; Breda, M.; Capobianco, R.; Molon, F.; Moressa, M.; Polato, S.; Simionato, P.; Zampiva, E.
2012-01-01
The ITER Heating Neutral Beam injectors will be implemented in three steps: development of the ion source prototype, development of the full injector prototype, and, finally, construction of up to three ITER injectors. The first two steps will be carried out in the ITER neutral beam test facility under construction in Italy. The ion source prototype, referred to as SPIDER, which is currently in the development phase, is a complex experiment involving more than 20 plant units and operating with beam-on pulses lasting up to 1 h. As for control and data acquisition it requires fast and slow control (cycle time around 0.1 ms and 10 ms, respectively), synchronization (10 ns resolution), and data acquisition for about 1000 channels (analogue and images) with sampling frequencies up to tens of MS/s, data throughput up to 200 MB/s, and data storage volume of up to tens of TB/year. The paper describes the architecture of the SPIDER control and data acquisition system, discussing the SPIDER requirements and the ITER CODAC interfaces and specifications for plant system instrumentation and control.
Data acquisition systems for high energy physics experiments
International Nuclear Information System (INIS)
Duran, I.; Olmos, P.
1986-01-01
The Data Acquisition Systems most frequently used in High Energy Physics experiments is described. This report begins with a brief description of the main elements of a typical signal processing chain, following with a detailed exposition of the four most popular instrumentation standards used in this kind of experiments: NIM, CAMAC, and VMI. (author). 20 figs., 9 ref
Data acquisition systems for high energy Physics experiments
International Nuclear Information System (INIS)
Duran, I.; Olmos, P.
1986-01-01
We describe here the Data Acquisition Systems most frequently used in High Energy Physics experiments. This report begins with a brief description of the main elements of a typical signal processing chain, following with a detailed exposition of the four most popular instrumentation standards used in this kind of experimental: NIM, CAMAC, FASTBUS and VME. (Author) 9 refs
The data acquisition system for the TASSO experiment
International Nuclear Information System (INIS)
Quarrie, D.R.
1981-06-01
The TASSO experiment at PETRA uses a Norsk Data NORD-10S for monitoring and control of the experiment. Trigger rates of typically 1 to 10 Hz are accepted and data are sent via a high speed link to the Central DESY IBM Triplex for later off-line analysis. This data acquisition system is described. (author)
War-gaming application for future space systems acquisition
Nguyen, Tien M.; Guillen, Andy T.
2016-05-01
Recently the U.S. Department of Defense (DOD) released the Defense Innovation Initiative (DII) [1] to focus DOD on five key aspects; Aspect #1: Recruit talented and innovative people, Aspect #2: Reinvigorate war-gaming, Aspect #3: Initiate long-range research and development programs, Aspect #4: Make DOD practices more innovative, and Aspect #5: Advance technology and new operational concepts. Per DII instruction, this paper concentrates on Aspect #2 and Aspect #4 by reinvigorating the war-gaming effort with a focus on an innovative approach for developing the optimum Program and Technical Baselines (PTBs) and their corresponding optimum acquisition strategies for acquiring future space systems. The paper describes a unified approach for applying the war-gaming concept for future DOD acquisition of space systems. The proposed approach includes a Unified Game-based Acquisition Framework (UGAF) and an Advanced Game-Based Mathematical Framework (AGMF) using Bayesian war-gaming engines to optimize PTB solutions and select the corresponding optimum acquisition strategies for acquiring a space system. The framework defines the action space for all players with a complete description of the elements associated with the games, including Department of Defense Acquisition Authority (DAA), stakeholders, warfighters, and potential contractors, War-Gaming Engines (WGEs) played by DAA, WGEs played by Contractor (KTR), and the players' Payoff and Cost functions (PCFs). The AGMF presented here addresses both complete and incomplete information cases. The proposed framework provides a recipe for the DAA and USAF-Space and Missile Systems Center (SMC) to acquire future space systems optimally.
Program plan for shipment, receipt, and storage of the TMI-2 core. Revision 1
International Nuclear Information System (INIS)
Quinn, G.J.; Reno, H.W.; Schmitt, R.C.
1985-01-01
This plan addresses the preparation and shipment of core debris from Three Mile Island Unit 2 (TMI-2) to the Idaho National Engineering Laboratory (INEL) and receipt and storage of that core debris. The Manager of the Nuclear Materials Evaluation Programs Division of EG and G Idaho, Inc. will manage two separate but integrated programs, one located at TMI (Part 1) and the other at INEL (Part 2). The Technical Integration Office (at TMI) is responsible for developing and implementing Part 1, TMI-2 Core Shipment Program. The Technical Support Branch (at INEL) is responsible for developing and implementing Part 2, TMI-2 Core Receipt and Storage. The plan described herein is a revision of a previous document entitled Plan for Shipment, Storage, and Examination of TMI-2 Fuel. This revision was required to delineate changes, primarily in Part 2, Core Activities Program, of the previous document. That part of the earlier document related to core examination was reidentified in mid-FY-1984 as a separate trackable entity entitled Core Sample Acquisition and Examination Project, which is not included here
Electric Motors Maintenance Planning From Its Operating Variables
Rodrigues, Francisco; Fonseca, Inácio; Farinha, José Torres; Ferreira, Luís; Galar, Diego
2017-09-01
The maintenance planning corresponds to an approach that seeks to maximize the availability of equipment and, consequently, increase the levels of competitiveness of companies by increasing production times. This paper presents a maintenance planning based on operating variables (number of hours worked, duty cycles, number of revolutions) to maximizing the availability of operation of electrical motors. The reading of the operating variables and its sampling is done based on predetermined sampling cycles and subsequently is made the data analysis through time series algorithms aiming to launch work orders before reaching the variables limit values. This approach is supported by tools and technologies such as logical applications that enable a graphical user interface for access to relevant information about their Physical Asset HMI (Human Machine Interface), including the control and supervision by acquisition through SCADA (Supervisory Control And data acquisition) data, also including the communication protocols among different logical applications.
Virginia Power's capacity acquisition program
International Nuclear Information System (INIS)
Carney, R.W.
1991-01-01
Virginia Power is a utility with a growing demand for electricity. To meet that growth it has embarked on an aggressive program to encourage the construction of privately-owned generating plants. In 1988 it conducted the largest competitive acquisition program by any utility to date. Virginia Power has retained the option to build plants if the bids it receives are too costly or do not meet the needs of its customers. This paper describes the situation at Virginia Power, the program it has implemented, and the capacity additions which are scheduled between 1989 and 1995
Operational plans for life science payloads - From experiment selection through postflight reporting
Mccollum, G. W.; Nelson, W. G.; Wells, G. W.
1976-01-01
Key features of operational plans developed in a study of the Space Shuttle era life science payloads program are presented. The data describes the overall acquisition, staging, and integration of payload elements, as well as program implementation methods and mission support requirements. Five configurations were selected as representative payloads: (a) carry-on laboratories - medical emphasis experiments, (b) mini-laboratories - medical/biology experiments, (c) seven-day dedicated laboratories - medical/biology experiments, (d) 30-day dedicated laboratories - Regenerative Life Support Evaluation (RLSE) with selected life science experiments, and (e) Biomedical Experiments Scientific Satellite (BESS) - extended duration primate (Type I) and small vertebrate (Type II) missions. The recommended operational methods described in the paper are compared to the fundamental data which has been developed in the life science Spacelab Mission Simulation (SMS) test series. Areas assessed include crew training, experiment development and integration, testing, data-dissemination, organization interfaces, and principal investigator working relationships.
International Nuclear Information System (INIS)
Greenwood, D.E.
1987-01-01
SAMS performs much of the synchronization of the distributed data acquisition system for the Advanced Toroidal Facility (ATF). SAMS is responsible for propagating shot information and managing te data system directories and logical names. This paper describes how SAMS communicates with other processes, both within the VAX cluster that supports most of the ATF data acquisition and on VAXes that are connected to the cluster via DECnet. 3 refs
SemGroup acquisition of central Alberta midstream : case study
International Nuclear Information System (INIS)
Purcell, T.
2005-01-01
A case study of SemGroup's acquisition of Central Alberta Midstream was presented. SemCAMS specializes in providing more efficient supply, storage, and distribution assets and services. Seminole Canada Gas is a leading independent natural gas marketing and energy asset management company that currently markets 369 MMbtu per day. The company purchases natural gas in western Canada for fee-based marketing services while also managing firm transportation contracts and providing gas storage for third party customers. SemCAMS owns the largest sour gas processor in Alberta as well as 3 sour gas processing plants, 600 miles of gathering pipeline, and a sweet gas processing plant. the company is also planning increased drilling and production activities and is now pursuing aggressive land acquisition policies. Over 25,000 square miles of land have been acquired. It was concluded that midstream companies should be customer-focused, provide reliability and guarantees, infrastructure investment and optimization. tabs., figs
Analysis Planning Methodology: For Thesis, Joint Applied Project, & MBA Research Reports
Naegle, Brad R.
2010-01-01
Acquisition Research Handbook Series Purpose: This guide provides the graduate student researcher—you—with techniques and advice on creating an effective analysis plan, and it provides methods for focusing the data-collection effort based on that analysis plan. As a side benefit, this analysis planning methodology will help you to properly scope the research effort and will provide you with insight for changes in that effort. The information presented herein was supported b...
Analysis of Logistics Support via Acquisition and Cross-Servicing Agreements and Contracted Support
2017-12-01
Automated Tracking and Reporting System AIT Accountability , Integrity, and Transparency AO Area of Operation AT&L Acquisition, Technology, and... Accountability Office HNS Host Nation Support xvi ID Indefinite Delivery IQ Indefinite Quantity JOPES Joint Operations Planning and Execution...Three Integrative Pillars USC United States Code USMC United States Marine Corps VAT Value Added Tax xviii THIS PAGE INTENTIONALLY LEFT
Frauger, Elisabeth; Nordmann, Sandra; Orleans, Veronica; Pradel, Vincent; Pauly, Vanessa; Thirion, Xavier; Micallef, Joëlle
2012-08-01
The objective of the study was to determine which psychoactive prescription drugs are illegally obtained and through which ways of acquisition. OPPIDUM is an annual national study. It is based on specialized care centers that included subjects presenting a drug dependency or under opiate maintenance treatment. All their psychoactive substances consumed are reported. This work focuses on the different ways of acquisition specially the illegal ways of acquisition (bought on the street, forged prescription, stolen, given, internet). For each medication illegally obtained, a ratio has been calculated (number of illegal acquisitions divided by the number of described acquisitions). In 2008, 5542 subjects have been included and have described the consumption of 11 027 substances including 63.8% of prescription drugs. Among them, 11% were illegally obtained. The different illegal acquisition ways were 'street market' (77.6%), 'gift' (16.6%), 'theft' (2.3%), 'forged prescription' (2.3%), and 'internet' (0.7%). The third first drugs illegally obtained were high dosage buprenorphine, methadone, and clonazepam. Some prescription drugs, less consumed, have an important ratio of illegal acquisition like ketamine, flunitrazepam, morphine, trihexyphenidyl, or methylphenidate. This study confirms that theft, forged prescription and internet are few used and permits to highlight diversion of prescription drugs. It is important to inform healthcare professionals on the different prescription drugs that are illegally obtained. © 2011 The Authors Fundamental and Clinical Pharmacology © 2011 Société Française de Pharmacologie et de Thérapeutique.
The Dreyfus model of clinical problem-solving skills acquisition: a critical perspective.
Peña, Adolfo
2010-06-14
The Dreyfus model describes how individuals progress through various levels in their acquisition of skills and subsumes ideas with regard to how individuals learn. Such a model is being accepted almost without debate from physicians to explain the 'acquisition' of clinical skills. This paper reviews such a model, discusses several controversial points, clarifies what kind of knowledge the model is about, and examines its coherence in terms of problem-solving skills. Dreyfus' main idea that intuition is a major aspect of expertise is also discussed in some detail. Relevant scientific evidence from cognitive science, psychology, and neuroscience is reviewed to accomplish these aims. Although the Dreyfus model may partially explain the 'acquisition' of some skills, it is debatable if it can explain the acquisition of clinical skills. The complex nature of clinical problem-solving skills and the rich interplay between the implicit and explicit forms of knowledge must be taken into consideration when we want to explain 'acquisition' of clinical skills. The idea that experts work from intuition, not from reason, should be evaluated carefully.
2010-09-08
...., because the changes are to internal Government organization and operating procedures only. The rule... 48 CFR Part 207 Government procurement. Ynette R. Shelkin, Editor, Defense Acquisition Regulations... Life Cycle of Major Defense Acquisition Programs (DFARS Case 2009-D014) AGENCY: Defense Acquisition...
[Prosody, speech input and language acquisition].
Jungheim, M; Miller, S; Kühn, D; Ptok, M
2014-04-01
In order to acquire language, children require speech input. The prosody of the speech input plays an important role. In most cultures adults modify their code when communicating with children. Compared to normal speech this code differs especially with regard to prosody. For this review a selective literature search in PubMed and Scopus was performed. Prosodic characteristics are a key feature of spoken language. By analysing prosodic features, children gain knowledge about underlying grammatical structures. Child-directed speech (CDS) is modified in a way that meaningful sequences are highlighted acoustically so that important information can be extracted from the continuous speech flow more easily. CDS is said to enhance the representation of linguistic signs. Taking into consideration what has previously been described in the literature regarding the perception of suprasegmentals, CDS seems to be able to support language acquisition due to the correspondence of prosodic and syntactic units. However, no findings have been reported, stating that the linguistically reduced CDS could hinder first language acquisition.
Production compilation : A simple mechanism to model complex skill acquisition
Taatgen, N.A.; Lee, F.J.
2003-01-01
In this article we describe production compilation, a mechanism for modeling skill acquisition. Production compilation has been developed within the ACT-Rational (ACT-R; J. R. Anderson, D. Bothell, M. D. Byrne, & C. Lebiere, 2002) cognitive architecture and consists of combining and specializing
International Nuclear Information System (INIS)
Kueffer, K.
1980-01-01
This lecture covers the Emergency Planning of the Operating organization and is based on the Code of Practice and Safety Guides of the IAEA as well as on arrangements in use at the Swiss Nuclear Power Station Beznau and - outlines the basis and content of an emergency plan - describes the emergencies postulated for emergency planning purposes - describes the responsibilities, the organization and the procedures of the operating organization to cope with emergency situations and the liaison between the operating organization, the regulatory body and public authorities - describes the facilities and equipment which should be available to cope with emergency sitauations - describes the measures and actions to be taken when an emergency arises in order to correct abnormal plant conditions and to protect the persons on-and off-site - describes the aid to be given to affected personnel - describes the aspects relevant to maintaining the emergency plan and organization in operational readiness. (orig./RW)
48 CFR 11.203 - Customer satisfaction.
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Customer satisfaction. 11.203 Section 11.203 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining Requirements Documents 11.203 Customer satisfaction...
Energy Technology Data Exchange (ETDEWEB)
Welch, L.C.
1984-01-01
This paper describes a project to meet these data acquisition needs for a new accelerator, ATLAS, being built at Argonne National Laboratory. ATLAS is a heavy-ion linear superconducting accelerator providing beam energies up to 25 MeV/A with a relative spread in beam energy as good as .0001 and a time spread of less than 100 psec. Details about the hardware front end, command language, data structure, and the flow of event treatment are covered.
Development of an automatic sample changer and a data acquisition system
International Nuclear Information System (INIS)
Bianchini, Ricardo M.; Estevez, Jorge; Vollmer, Alberto E.; Iglicki, Flora A.
1999-01-01
An automatic electro-pneumatic sample changer with a rotating sample holder is described. The changer is coupled through an electronic interface with the data acquisition station. The software to automate the system has been designed. (author)
Conceptual Design Plan SM-43 Replacement Project
Energy Technology Data Exchange (ETDEWEB)
University of California, Los Alamos National Laboratory, SCC Project Office
2000-11-01
The Los Alamos National Laboratory Conceptual Design Plan for the SM-43 Replacement Project outlines plans for replacing the SM-43 Administration Building. Topics include the reasons that replacement is considered a necessity; the roles of the various project sponsors; and descriptions of the proposed site and facilities. Also covered in this proposal is preliminary information on the project schedule, cost estimates, acquisition strategy, risk assessment, NEPA strategy, safety strategy, and safeguards and security. Spreadsheets provide further detail on space requirements, project schedules, and cost estimates.
Constraint-based Attribute and Interval Planning
Jonsson, Ari; Frank, Jeremy
2013-01-01
In this paper we describe Constraint-based Attribute and Interval Planning (CAIP), a paradigm for representing and reasoning about plans. The paradigm enables the description of planning domains with time, resources, concurrent activities, mutual exclusions among sets of activities, disjunctive preconditions and conditional effects. We provide a theoretical foundation for the paradigm, based on temporal intervals and attributes. We then show how the plans are naturally expressed by networks of constraints, and show that the process of planning maps directly to dynamic constraint reasoning. In addition, we de ne compatibilities, a compact mechanism for describing planning domains. We describe how this framework can incorporate the use of constraint reasoning technology to improve planning. Finally, we describe EUROPA, an implementation of the CAIP framework.
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Short selection processes... ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 636.602-5 Short selection processes for contracts not to exceed the simplified acquisition threshold. The short selection process described in FAR 36...
International Nuclear Information System (INIS)
Ikeda, Mitsuru; Mizoguchi, Riichirou; Yoshikawa, Shinji; Ozawa, Kenji
1997-03-01
This report describes a technical survey of acquisition method of an operator's understanding for functions and structures of his target nuclear plant. This method is to play a key role in the information processing framework to support on-training operators in forming their knowledge of the nuclear plants. This kind of technical framework is aiming at enhancing human operator's ability to cope with anomaly plant situations which are difficult to expect from preceding experiences or engineering surveillance. In these cases, cause identifications and responding operation selections are desired to made not only empirically but also based on thoughts about possible phenomena to take place within the nuclear plant. This report focuses on a particular element technique, defined as 'explanation-based knowledge acquisition', as the candidate technique to potentially be extended to meet the requirement written above, and discusses about applicability to the learning support system and about necessary improvements, to identify future technical developments. (author)
Data acquisition for the D0 experiment
International Nuclear Information System (INIS)
Cutts, D.; Hoftun, J.S.; Johnson, C.R.; Zeller, R.T.; Trojak, T.; Van Berg, R.
1985-01-01
We describe the acquisition system for the D0 experiment at Fermilab, focusing primarily on the second level, which is based on a large parallel array of MicroVAX-II's. In this design data flows from the detector readout crates at a maximum rate of 320 Mbytes/sec into dual-port memories associated with one selected processor in which a VAXELIN based program performs the filter analysis of a complete event
Clinical study of Whole Heart MRCA. Evaluation of acquisition method
International Nuclear Information System (INIS)
Iwai, Mitsuhiro; Tateishi, Toshiki; Takeda, Soji; Hayashi, Ryuji
2006-01-01
In CT coronary angiography (CTCA), image reconstruction is performed using the optimal phase with either the relative or the absolute delaying methods. Whole Heart MRCA is generally considered to set up the signal acquisition time when is only the middle-diastolic phase in the standstill state of the right coronary artery per cardiac beat as the conventional method. However, in the case of high cardiac beats, such as arrhythmia respiratory instability, etc., image acquisition can take long time and a good quality image may not be maintained. We use not only the middle-diastolic acquisition (conventional method) but also the systolic phase acquisition (systolic phase method) and the shortening method (total acquisition shortening (TASH) method). The aim of this study was to examine the depiction ability and the image quality in the images of 585 Whole Heart MRCA(s) acquired by three methods described above. Seventy percent of all exhibited good quality images in the middle of extension. The remaining images obtained by the systolic phase (at the time of high cardiac beats) and the TASH methods (respiratory instability etc.) were better than those obtained using the conventional method. The sensitivity and the specificity of coronary stenosis (75%) in the TASH, systolic-phase and the conventional methods were 90% and 96%, 96% and 97%, and 87% and 96%, respectively. These findings proved that no significant differences in the depiction of the coronary stenosis were apparent using the three methods. It was concluded that it was necessary to establish suitable signal time acquisition and to change the acquisition method depending on cardiac beats or the state of breathing for Whole Heart MRCA. (author)
System design description for mini-dacs data acquisition and control system
International Nuclear Information System (INIS)
Vargo, F.G. Jr.; Trujillo, L.T.; Smith, S.O.
1994-01-01
This document describes the hardware computer system, for the mini data acquisition and control system (DACS) that was fabricated by Los Alamos National Laboratory (LANL), to support the testing of the spare mixer pump for SY-101
48 CFR 970.5223-1 - Integration of environment, safety, and health into work planning and execution.
2010-10-01
..., safety, and health into work planning and execution. 970.5223-1 Section 970.5223-1 Federal Acquisition... Integration of environment, safety, and health into work planning and execution. As prescribed in 970.2303-3(b), insert the following clause: Integration of Environment, Safety, and Health Into Work Planning and...
Defense Acquisition Research Journal. Volume 20, Number 3, Issue 67, October 2013
2013-10-01
National Security and Resource Strategy Dr. Keith Snider Naval Postgraduate School Dr. John Snoderly Defense Acquisition University Dr. David M. Tate... David M. Van Buren on our Research Advisory Board. Second, Mr. Jerry Vandewiele has replaced Dr. Don McKeon as the DAU Midwest representative on our...planning in particular—and has proven its value (Barzelay & Campbell, 2003; Berman & West, 1998; Berry & Wechsler , 1995; Boyne & Gould-Williams
Directory of Open Access Journals (Sweden)
Iamandi Irina Eugenia
2010-12-01
Full Text Available Based on empirical studies and theoretical evidence, the paper investigates the relationship between mergers and acquisitions in Romania and Romanian stock market, described by the BET and BET-C indexes. By using the Granger causality test for the number of mergers and acquisitions, the research results suggest that, for the market and period considered, one way and both ways relationships are present.
RECENT DEVELOPMENTS IN ALTERNATIVES TO CAMAC FOR DATA ACQUISITION AT DIII-D
International Nuclear Information System (INIS)
KELLMAN, D.H.; CAMPBELL, G.L.; FERRON, J.R.; PIGLOWSKI, D.A.; AUSTIN, M.E.; MCKEE, G.R.
2004-03-01
OAK-B135 For over twenty years, data acquisition hardware at DIII-D has been based on the CAMAC platform. These rugged and reliable systems, however, are gradually becoming obsolete due to end-of-life issues, ever-decreasing industry support of older hardware, and the availability of modern alternative hardware with superior performance. Efforts are underway at DIII-D to adopt new data acquisition solutions which exploit modern technologies and surpass the limitations of the CAMAC standard. These efforts have involved the procurement and development of data acquisition systems based on the PCI and Compact-PCI platform standards. These systems are comprised of rack-mount computers containing data acquisition boards (digitizers), Ethernet connectivity, and the drivers and software necessary for control. Each digitizer contains analog-to-digital converters, control circuitry, firmware and memory to collect, store, and transfer waveform data acquired using internal or external triggers and clocks. Software has been developed which allows DIII-D computers to program the operational parameters of the digitizers, as well as to upload acquired data into the DIII-D acquisition database. All communication between host computers and the new acquisition systems occurs via standard Ethernet connections, a vast improvement over the slower, serial loop highways used for control and data transfer with CAMAC systems. In addition, the capabilities available in modern integrated and printed circuit manufacture result in digitizers with high channel count and memory density. Cost savings are also realized by utilizing a platform based on standards of the personal computer industry. Details of the new systems at DIII-D are presented, along with initial experience with their use, and plans for future expansion and improvement
Acquisitions Everywhere: Modeling an Acquisitions Data Standard to Connect a Distributed Environment
Hanson, Eric M.; Lightcap, Paul W.; Miguez, Matthew R.
2016-01-01
Acquisitions functions remain operationally crucial in providing access to paid information resources, but data formats and workflows utilized within library acquisitions remain primarily within the traditional integrated library system (ILS). As libraries have evolved to use distributed systems to manage information resources, so too must acquisitions functions adapt to an environment that may include the ILS, e‐resource management systems (ERMS), institutional repositories (IR), and other d...
Management plan -- Multi-Function Waste Tank Facility. Revision 1
International Nuclear Information System (INIS)
Fritz, R.L.
1995-01-01
This Westinghouse Hanford Company (WHC) Multi-Function Waste Tank Facility (MWTF) Management Plan provides guidance for execution WHC MWTF Project activities related to design, procurement, construction, testing, and turnover. This Management Plan provides a discussion of organizational responsibilities, work planning, project management systems, quality assurance (QA), regulatory compliance, personnel qualifications and training, and testing and evaluations. Classified by the US Department of Energy (DOE) as a major systems acquisition (MSA), the MWTF mission is to provide a safe, cost-effective, and environmentally sound method for interim storage of Hanford Site high-level wastes. This Management Plan provides policy guidance and direction to the Project Office for execution of the project activities
Management plan -- Multi-Function Waste Tank Facility. Revision 1
Energy Technology Data Exchange (ETDEWEB)
Fritz, R.L.
1995-01-11
This Westinghouse Hanford Company (WHC) Multi-Function Waste Tank Facility (MWTF) Management Plan provides guidance for execution WHC MWTF Project activities related to design, procurement, construction, testing, and turnover. This Management Plan provides a discussion of organizational responsibilities, work planning, project management systems, quality assurance (QA), regulatory compliance, personnel qualifications and training, and testing and evaluations. Classified by the US Department of Energy (DOE) as a major systems acquisition (MSA), the MWTF mission is to provide a safe, cost-effective, and environmentally sound method for interim storage of Hanford Site high-level wastes. This Management Plan provides policy guidance and direction to the Project Office for execution of the project activities.
ACP/R3000 processors in data acquisition systems
International Nuclear Information System (INIS)
Deppe, J.; Areti, H.; Atac, R.
1989-02-01
We describe ACP/R3000 processor based data acquisition systems for high energy physics. This VME bus compatible processor board, with a computational power equivalent to 15 VAX 11/780s or better, contains 8 Mb of memory for event buffering and has a high speed secondary bus that allows data gathering from front end electronics. 2 refs., 3 figs
Acquisition of German pluralization rules in monolingual and multilingual children
Directory of Open Access Journals (Sweden)
Eugen Zaretsky
2013-10-01
Full Text Available Existing studies on plural acquisition in German have relied on small samples and thus hardly deliver generalizable and differentiated results. Here, overgeneralizations of certain plural allomorphs and other tendencies in the acquisition of German plural markers are described on the basis of test data from 7,394 3- to 5-yearold monolingual German and bi/multilingual immigrant children tested with a modified, validated version of the Marburger Sprachscreening (MSS language test and 476 children tested with the SETK 3-5 language test. Classified correct and wrong answers to MSS and SETK 3-5 plural items were compared. The acquisition patterns of immigrants corresponded to those of younger German children. Both monolingual German and immigrant children demonstrated generally the same universal frequency and phonetically/phonologically based error patterns, irrespective of their linguistic background, but with different tendencies such as overgeneralization of -s by German children only.
A fast data acquisition system for PHA and MCS measurements
International Nuclear Information System (INIS)
Eijk, P.J.A. van; Keyser, C.J.; Rigterink, B.J.; Hasper, H.
1985-01-01
A microprocessor controlled data acquisition system for pulse height analysis and multichannel scaling is described. A 4K x 24 bit static memory is used to obtain a fast data acquisition rate. The system can store 12 bit ADC or TDC data within 150 ns. Operating commands can be entered via a small keyboard or by a RS-232-C interface. An oscilloscope is used to display a spectrum. The display of a spectrum or the transmission of spectrum data to an external computer causes only a short interruption of a measurement in progress and is accomplished by using a DMA circuit. The program is written in Modular Pascal and is divided into 15 modules. These implement 9 parallel processes which are synchronized by using semaphores. Hardware interrupts from the data acquisition, DMA, keyboard and RS-232-C circuits are used to signal these processes. (orig.)
48 CFR 434.004 - Acquisition strategy.
2010-10-01
... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Acquisition strategy. 434.004 Section 434.004 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING MAJOR SYSTEM ACQUISITION General 434.004 Acquisition strategy. (a) The program...
Continuous and real-time data acquisition system for superconducting tokamaks HT-7 and TRIAM-1M
International Nuclear Information System (INIS)
Wang, F.; Luo, J.R.; Nakamura, K.; Sato, K.N.; Hanada, K.; Sakamoto, M.; Idei, H.; Kawasaki, S.; Nakashima, H.
2006-01-01
Conventional data acquisition systems cannot deal with data acquisition for a long-time discharge of a nuclear fusion reactor. Thus, continuous data acquisition with a real-time data presentation during discharge must be developed. Two data acquisition systems, which include alternating CAMAC data acquisition and long-time PCI data acquisition, are designed for the long-time operation of HT-7 tokamak. Since an effective alternating mode is adopted, the alternating CAMAC data acquisition can accurately and continuously acquire data at a rate of 10 kHz. The acquired data is immediately transmitted to a data server and real-time results can be presented during the plasma discharge. As for the long-time PCI data acquisition, a special kind of PCI A/D card, which has a hard disk on board, is designed to collect data at a max speed of 200 kHz. Thus, the total sampling duration is only related to the capacity of the hard disk on board. These two types of data acquisitions were applied to HT-7 tokamak and a 250 s discharge was acquired. These data acquisition systems were also successfully demonstrated on a 2500 s plasma discharge on TRIAM-1M. This paper describes the two data acquisitions in detail
Project Execution Plan, Rev. 3
International Nuclear Information System (INIS)
IT Corporation, Las Vegas
2002-01-01
This plan addresses project activities encompassed by the U.S. Department of Energy's (DOE's), National Nuclear Security Administration Nevada Operations Office, Environmental Restoration Division and conforms to the requirements contained in the Life-Cycle Asset Management, DOE Order 430.1A; The Joint Program Office Policy on Project Management in Support of DOE Order 430.1; Program and Project Management for the Acquisition of Capital Assets, DOE Order 413.3; the Project Execution and Engineering Management Planning Guide, GPG-FM-010; and other applicable Good Practice Guides; and the FY 2001 Integrated Planning, Accountability, and Budgeting System Policy Guidance. The plan also reflects the milestone philosophies of the Federal Facility Agreement and Consent Order, as agreed to by the State of Nevada, the DOE, and the U.S. Department of Defense; and traditional project management philosophies such as the development of life-cycle costs, schedules, and work scope; identification o f roles and responsibilities; and baseline management and controls
Energy Technology Data Exchange (ETDEWEB)
Erhart, Steven C. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Spencer, Charles G. [Y-12 National Security Complex, Oak Ridge, TN (United States)
2013-12-01
The accomplishments to date and the long-range planning of the Y-12 Energy Management and Sustainability and Stewardship programs support the U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) vision for a commitment to energy effi ciency and sustainability and to achievement of the Guiding Principles. Specifi cally, the Y-12 vision is to support the Environment, Safety and Health Policy and the DOE Strategic Sustainability Performance Plan (SSPP), while promoting overall sustainability and reduction of greenhouse gas (GHG) emissions. The mission of the Y-12 Energy Management program is to incorporate energy-efficient technologies site-wide and to position Y-12 to meet NNSA energy requirement needs through 2025 and beyond. This plan addresses: Greenhouse Gas Reduction and Comprehensive Greenhouse Gas Inventory; Buildings, ESPC Initiative Schedule, and Regional and Local Planning; Fleet Management; Water Use Efficiency and Management; Pollution Prevention and Waste Reduction; Sustainable Acquisition; Electronic Stewardship and Data Centers; Renewable Energy; Climate Change; and Budget and Funding.
32 CFR 644.23 - Real Estate Planning Documents.
2010-07-01
... PROPERTY REAL ESTATE HANDBOOK Project Planning Military (army and Air Force) and Other Federal Agencies... of any peculiar or unusual problems anticipated in connection with the proposed acquisition including... property for U.S. Army Reserve and Army National Guard use by transfer from another military department or...
48 CFR 34.004 - Acquisition strategy.
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Acquisition strategy. 34... CATEGORIES OF CONTRACTING MAJOR SYSTEM ACQUISITION General 34.004 Acquisition strategy. The program manager, as specified in agency procedures, shall develop an acquisition strategy tailored to the particular...
48 CFR 3034.004 - Acquisition strategy.
2010-10-01
... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Acquisition strategy. 3034.004 Section 3034.004 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND... Acquisition strategy. See (HSAR) 48 CFR 3009.570 for policy applicable to acquisition strategies that consider...
Gerry Bauer
The CMS Storage Manager System The tail-end of the CMS Data Acquisition System is the Storage Manger (SM), which collects output from the HLT and stages the data at Cessy for transfer to its ultimate home in the Tier-0 center. A SM system has been used by CMS for several years with the steadily evolving software within the XDAQ framework, but until relatively recently, only with provisional hardware. The SM is well known to much of the collaboration through the ‘MiniDAQ’ system, which served as the central DAQ system in 2007, and lives on in 2008 for dedicated sub-detector commissioning. Since March of 2008 a first phase of the final hardware was commissioned and used in CMS Global Runs. The system originally planned for 2008 aimed at recording ~1MB events at a few hundred Hz. The building blocks to achieve this are based on Nexsan's SATABeast storage array - a device housing up to 40 disks of 1TB each, and possessing two controllers each capable of almost 200 MB/sec throughput....
ELECTRIC MOTORS MAINTENANCE PLANNING FROM ITS OPERATING VARIABLES
Directory of Open Access Journals (Sweden)
Francisco RODRIGUES
2017-07-01
Full Text Available The maintenance planning corresponds to an approach that seeks to maximize the availability of equipment and, conse-quently, increase the levels of competitiveness of companies by increasing production times. This paper presents a maintenance planning based on operating variables (number of hours worked, duty cycles, number of revolutions to maximizing the availability of operation of electrical motors. The reading of the operating variables and its sampling is done based on predetermined sampling cycles and subsequently is made the data analysis through time series algo-rithms aiming to launch work orders before reaching the variables limit values. This approach is supported by tools and technologies such as logical applications that enable a graphical user interface for access to relevant information about their Physical Asset HMI (Human Machine Interface, including the control and supervision by acquisition through SCADA (Supervisory Control And data acquisition data, also including the communication protocols among different logical applications.
Age of Acquisition Effects in Chinese EFL learners’ Delexicalized Verb and Collocation Acquisition
Directory of Open Access Journals (Sweden)
Miao Haiyan
2015-05-01
Full Text Available This paper investigates age of acquisition (AoA effects and the acquisition of delexicalized verbs and collocations in Chinese EFL learners, and explores the underlying reasons from the connectionist model for these learners’ acquisition characteristics. The data were collected through a translation test consisted of delexialized verb information section and English-Chinese and Chinese-English collocation parts, aiming to focus on Chinese EFL learners’ receptive and productive abilities respectively. As Chinese EFL is a nationally classroom-based practice beginning from early primary school, the pedagogical value and different phases of acquisition are thus taken into consideration in designing the translation test. Research results show that the effects of AoA are significant not only in the learners’ acquisition of individual delexicalized verbs but also in delexicalized collocations. Although learners have long begun to learn delexicalized verbs, their production indicates that early learning does not guarantee total acquisition, because their grasp of delexicalized verbs still stay at the senior middle school level. AoA effects significantly affect the recognition but not the production of collocations. Furthermore, a plateau effect occurs in learners’ acquisition of college-level delexicalized collocations, as their recognition and production have no processing advantages over earlier learned collocations.
Sustaining an Acquisition-based Growth Strategy
DEFF Research Database (Denmark)
Henningsson, Stefan; Toppenberg, Gustav; Shanks, Graeme
Value creating acquisitions are a major challenge for many firms. Our case study of Cisco Systems shows that an advanced Enterprise Architecture (EA) capability can contribute to the acquisition process through a) preparing the acquirer to become ‘acquisition ready’, b) identifying resource...... complementarity, c) directing and governing the integration process, and d) post-acquisition evaluation of the achieved integration and proposing ways forward. Using the EA capability in the acquisition process improves Cisco’s ability to rapidly capture value from its acquisitions and to sustain its acquisition...
48 CFR 234.004 - Acquisition strategy.
2010-10-01
... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Acquisition strategy. 234..., DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING MAJOR SYSTEM ACQUISITION 234.004 Acquisition strategy. (1) See 209.570 for policy applicable to acquisition strategies that consider the use of lead system...
Energy Technology Data Exchange (ETDEWEB)
Klaue, S. [Freie Univ. Berlin (Germany). Inst. fuer Publizistik- und Kommunikationswissenschaften
2007-10-15
In the contribution under consideration the author reports on participation acquisitions at and between redistributors. The imperfect treatment of the acquisition of minority participations at public utilities by cartel authorities and courts did not bring satisfying results for the structure to the power economy. The preconditions for more competition became worse due to the changes in the structure of power economy which were not prevented by the cartel authorities. The competitive order loses at clarity, if the previous practice of the cartel authorities is continued. It is undecided whether the development of a dominating market system by a multiplicity of minority acquisitions can be described as an improper use of a market dominating position according to paragraph 19 of the law against restraints of competition.
Analyzing and executing mergers and acquisitions.
Woodard, M A; Lindstrom, K
1997-05-01
Healthcare organization are consolidating at an unprecedented rate. With the number of mergers and acquisitions not likely to abate, healthcare organizations will need to become involved in strategic planning to manage the effects of this transaction activity and exert more control over the direction it will take. In particular, healthcare organizations need to know how to respond when their organizations are approached about a consolidation opportunity and how to determine whether a consolidation transaction would be strategically advantageous. Healthcare organizations can increase the chances that a consolidation will be successful by following six steps: performing a business inventory; determining the desire business profile; setting criteria for selecting a partner; identifying potential buyers and sellers; negotiating terms; and closing the transaction.
Overview of data acquisition system for SST-1 diagnostics
International Nuclear Information System (INIS)
Sharma, Manika; Mansuri, Imran; Raval, Tushar; Sharma, A.L; Pradhan, S.
2016-01-01
Highlights: • An account of architecture and data acquisition activities of SST-1 data acquisition system (DAS) for SST-1 diagnostics and subsystems. • PXI based Data acquisition system and CAMAC based Data acquisition system for slow and fast plasma diagnostics. • SST-1 DAS interface and its communication with SST-1 central control system. Integration of SST-1 DAS with timing system. • SST-1 DAS data archival and data analysis. - Abstract: The recent first phase operations of SST-1 in short pulse mode have provided an excellent opportunity for the essential initial tests and benchmark of the SST-1 Data Acquisition System. This paper describes the SST-1 Data Acquisition systems (DAS), which with its heterogeneous composition and distributed architecture, aims to cover a wide range of slow to fast channels interfaced with a large set of diagnostics. The DAS also provides the essential user interface for data acquisition to cater both on and off-line data usage. The central archiving and retrieval service is based on a dual step architecture involving a combination of Network Attached Server (NAS) and a Storage Area Network (SAN). SST-1 Data Acquisition Systems have been reliably operated in the SST-1 experimental campaigns. At present different distributed DAS caters the need of around 130 channels from different SST-1 diagnostics and its subsystems. PXI based DAS and CAMAC based DAS have been chosen to cater the need, with sampling rates varying from 10Ksamples/sec to 1Msamples/sec. For these large sets of channels acquiring from individual diagnostics and subsystems has been a combined setup, subjected to a gradual phase of optimization and tests resulting into a series of improvisations over the recent operations. In order to facilitate a reliable data acquisition, the model further integrates the objects of the systems with the Central Control System of SST-1 using the TCP/IP communication. The associated DAS software essentially addresses the
Overview of data acquisition system for SST-1 diagnostics
Energy Technology Data Exchange (ETDEWEB)
Sharma, Manika, E-mail: bithi@ipr.res.in; Mansuri, Imran; Raval, Tushar; Sharma, A.L; Pradhan, S.
2016-11-15
Highlights: • An account of architecture and data acquisition activities of SST-1 data acquisition system (DAS) for SST-1 diagnostics and subsystems. • PXI based Data acquisition system and CAMAC based Data acquisition system for slow and fast plasma diagnostics. • SST-1 DAS interface and its communication with SST-1 central control system. Integration of SST-1 DAS with timing system. • SST-1 DAS data archival and data analysis. - Abstract: The recent first phase operations of SST-1 in short pulse mode have provided an excellent opportunity for the essential initial tests and benchmark of the SST-1 Data Acquisition System. This paper describes the SST-1 Data Acquisition systems (DAS), which with its heterogeneous composition and distributed architecture, aims to cover a wide range of slow to fast channels interfaced with a large set of diagnostics. The DAS also provides the essential user interface for data acquisition to cater both on and off-line data usage. The central archiving and retrieval service is based on a dual step architecture involving a combination of Network Attached Server (NAS) and a Storage Area Network (SAN). SST-1 Data Acquisition Systems have been reliably operated in the SST-1 experimental campaigns. At present different distributed DAS caters the need of around 130 channels from different SST-1 diagnostics and its subsystems. PXI based DAS and CAMAC based DAS have been chosen to cater the need, with sampling rates varying from 10Ksamples/sec to 1Msamples/sec. For these large sets of channels acquiring from individual diagnostics and subsystems has been a combined setup, subjected to a gradual phase of optimization and tests resulting into a series of improvisations over the recent operations. In order to facilitate a reliable data acquisition, the model further integrates the objects of the systems with the Central Control System of SST-1 using the TCP/IP communication. The associated DAS software essentially addresses the
Data acquisition and control for LMFBR component testing
International Nuclear Information System (INIS)
Turner, G.E.
1983-01-01
Liquid Metal Fast Breeder Reactor components such as pumps, steam generators, and piping components are tested for their ability to withstand expected thermal transients of up to 25 0 F/s (14 0 C/s). The Energy Technology Engineering Center performs these tests in facilities specifically designed for that purpose. Although much of the instrumentation and controls for these test facilities are similar to those used in conventional process plants, the requirement to produce, control, and measure the effects of rapid thermal transients results in some not-so-conventional data acquisition and control system design criteria. This paper describes a typical data-acquisition system used at one of the ETEC test facilities and how the thermal transients are produced and controlled in the pump and steam-generator test facilities
SRP [Salt Repository Project] configuration management plan
International Nuclear Information System (INIS)
1987-01-01
This configuration management plan describes the organization, policies, and procedures that will be used on the Salt Repository Project (SRP) to implement the configuration management disciplines and controls. Configuration management is a part of baseline management. Baseline management is defined in the SRP Baseline Procedures Notebook and also includes cost and schedule baselines. Configuration management is a discipline applying technical and administrative direction and surveillance to identify and document the functional and physical characteristics of an item, to control changes to those characteristics, to record and report change processing and implementation status, and to audit the results. Configuration management is designed as a project management tool to determine and control baselines, and ensure and document all components of a project interface both physically and functionally. The purpose is to ensure that the product acquired satisfies the project's technical and operational requirements, and that the technical requirements are clearly defined and controlled throughout the development and acquisition process. 5 figs
User Manual for the AZ-101 Data Acquisition System (AS-101 DAS)
Energy Technology Data Exchange (ETDEWEB)
BRAYTON, D.D.
2000-02-17
User manual for the TK AZ-101 Waste Retrieval System Data Acquisition System. The purpose of this document is to describe use of the AZ-101 Data Acquisition System (AZ-101 DAS). The AZ-101 DAS is provided to fulfill the requirements for data collection and monitoring as defined in Letters of Instruction (LOI) from Numatec Hanford Corporation (NHC) to Fluor Federal Services (FFS). For a complete description of the system, including design, please refer to the AZ-101 DAS System Description document, RPP-5572.
User Manual for the AZ-101 Data Acquisition System (AS-101 DAS)
International Nuclear Information System (INIS)
BRAYTON, D.D.
2000-01-01
User manual for the TK AZ-101 Waste Retrieval System Data Acquisition System. The purpose of this document is to describe use of the AZ-101 Data Acquisition System (AZ-101 DAS). The AZ-101 DAS is provided to fulfill the requirements for data collection and monitoring as defined in Letters of Instruction (LOI) from Numatec Hanford Corporation (NHC) to Fluor Federal Services (FFS). For a complete description of the system, including design, please refer to the AZ-101 DAS System Description document, RPP-5572
Data acquisition system from uncorrelated experimental inputs
International Nuclear Information System (INIS)
Bals, I.; Caprini, M.; Goran, B.; Lutescu, S.; Niculescu, D.
1974-01-01
The system described in this work was performed as a small acquisition center for neutron physics experiment and was designed as a specialized device. The system was entirely MSI and SSI integrated circuits performed using 33 double sided printed circuit boards. The modular structure with information flow on buses led to wining simplification. The system can be further developed, using appropriate interfaces and programming modules to extend the range of possible experiments
48 CFR 11.801 - Preaward in-use evaluation.
2010-10-01
... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Preaward in-use evaluation. 11.801 Section 11.801 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Testing 11.801 Preaward in-use evaluation. Supplies may be...
2010-01-01
... management plan, and addition of multiple-site components. (a) Changes in the boundary of a Reserve and major changes to the final management plan, including state laws or regulations promulgated specifically for the... management plan change. Changes in the boundary of a Reserve involving the acquisition of properties not...
Energy Technology Data Exchange (ETDEWEB)
Ikeda, Mitsuru; Mizoguchi, Riichirou [Inst. of Scientific and Industrial Research, Osaka Univ., Ibaraki (Japan); Yoshikawa, Shinji; Ozawa, Kenji
1997-03-01
This report describes a technical survey of acquisition method of an operator`s understanding for functions and structures of his target nuclear plant. This method is to play a key role in the information processing framework to support on-training operators in forming their knowledge of the nuclear plants. This kind of technical framework is aiming at enhancing human operator`s ability to cope with anomaly plant situations which are difficult to expect from preceding experiences or engineering surveillance. In these cases, cause identifications and responding operation selections are desired to made not only empirically but also based on thoughts about possible phenomena to take place within the nuclear plant. This report focuses on a particular element technique, defined as `explanation-based knowledge acquisition`, as the candidate technique to potentially be extended to meet the requirement written above, and discusses about applicability to the learning support system and about necessary improvements, to identify future technical developments. (author)
IPNS distributed-processing data-acquisition system
International Nuclear Information System (INIS)
Haumann, J.R.; Daly, R.T.; Worlton, T.G.; Crawford, R.K.
1981-01-01
The Intense Pulsed Neutron Source (IPNS) at Argonne National Laboratory is a major new user-oriented facility which has come on line for basic research in neutron scattering and neutron radiation damage. This paper describes the distributed-processing data-acquisition system which handles data collection and instrument control for the time-of-flight neutron-scattering instruments. The topics covered include the overall system configuration, each of the computer subsystems, communication protocols linking each computer subsystem, and an overview of the software which has been developed
Radioactive waste management plan. Plan 82
International Nuclear Information System (INIS)
1982-06-01
The report is the first account of the nuclear power utilities of Sweden about the plans for the final disposal of the radioactive waste products of the nuclear power. Part 1 describes the general background, the plans for research and development, including the necessary facilities. The time schedule and the calculated costs of the operations are presented. (G.B.)
International Nuclear Information System (INIS)
1993-07-01
The purpose of this Public Participation Plan is to describe the US Department of Energy's (DOE) plan for involving the public in the decision-making process for the Uranium Mill Tailings Remedial Action (UMTRA) Project. The plan describes how the DOE will meet the public participation requirements of the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, as amended, and of the National Environmental Policy Act (NEPA) of 1969. It includes the UMTRA Project Office plans for complying with DOE Order 5440.1D and for implementing the DOE's Public Participation Policy for Environmental Restoration and Waste Management (1992) and Public Participation Guidance for Environmental Restoration and Waste Management (1993)
Implementation of imaging of the national protocol for quality control in planning systems
International Nuclear Information System (INIS)
Caudepon Moreno, F.; Martin-Viera cueto, J. A.; Bodineau gil, C.; Benitez Villegas, E. M.; Casado Villalon, F. J.; Moreno Sainz, C.
2011-01-01
Quality control of the planning system (SP) plays a key role in quality assurance schemes that include all stages of the radiotherapy process.In this work we focus on the evidence detailing the ''Protocol for quality control in therapy planning systems with ionizing radiation of the SEFM in ''anatomical data acquisition (DA).
Monitoring and data acquisition of the high speed hydrogen pellet in SPINS
Energy Technology Data Exchange (ETDEWEB)
Mukherjee, Samiran Shanti, E-mail: samiran@ipr.res.in; Mishra, Jyotishankar; Gangradey, Ranjana; Dutta, Pramit; Rastogi, Naveen; Panchal, Paresh; Nayak, Pratik; Agarwal, Jyoti; Bairagi, Pawan; Patel, Haresh; Sharma, Hardik
2016-11-15
Highlights: • Pellet INjector System with monitoring and data acquisition is described. • A high speed camera was used to view pellet size, and its flight trajectory. • PXI based high speed control system is used data acquisition. • Pellets of length 2–4.8 mm and speed 250–750 m/s were obtained. - Abstract: Injection of solid hydrogen pellets is an efficient way of replenishing the spent fuel in high temperature plasmas. Aiming that, a Single Pellet INjector System (SPINS) is developed at Institute for Plasma Research (IPR), India, to initiate pellet injection related research in SST-1. The pellet injector is controlled by a PXI system based data acquisition and control (DAC) system for pellet formation, precise firing control, data collection and diagnostics. The velocity of high speed moving pellets is estimated by using two sets of light gate diagnostic. Apart from light gate, a fast framing camera is used to measure the pellet size and its speed. The pellet images are captured at a frame rate of ∼200,000 frames per second at (128 × 64) pixel resolution with an exposure time of 1 μs. Using these diagnostic, various cylindrical pellets of length ranging from 2 to 4.8 mm and speed 250–750 m/s were successfully obtained. This paper describes the control and data acquisition system of SPINS, the techniques for measurement of pellet velocity and capturing images of high speed moving pellet.
The Resource Manager the ATLAS Trigger and Data Acquisition System
Aleksandrov, Igor; The ATLAS collaboration; Lehmann Miotto, Giovanna; Soloviev, Igor
2016-01-01
The Resource Manager of the ATLAS Trigger and Data Acquisition system The Resource Manager is one of the core components of the Data Acquisition system of the ATLAS experiment at the LHC. The Resource Manager marshals the right for applications to access resources which may exist in multiple but limited copies, in order to avoid conflicts due to program faults or operator errors. The access to resources is managed in a manner similar to what a lock manager would do in other software systems. All the available resources and their association to software processes are described in the Data Acquisition configuration database. The Resource Manager is queried about the availability of resources every time an application needs to be started. The Resource Manager’s design is based on a client-server model, hence it consists of two components: the Resource Manager "server" application and the "client" shared library. The Resource Manager server implements all the needed functionalities, while the Resource Manager c...
Embedded systems design for high-speed data acquisition and control
Di Paolo Emilio, Maurizio
2015-01-01
This book serves as a practical guide for practicing engineers who need to design embedded systems for high-speed data acquisition and control systems. A minimum amount of theory is presented, along with a review of analog and digital electronics, followed by detailed explanations of essential topics in hardware design and software development. The discussion of hardware focuses on microcontroller design (ARM microcontrollers and FPGAs), techniques of embedded design, high speed data acquisition (DAQ) and control systems. Coverage of software development includes main programming techniques, culminating in the study of real-time operating systems. All concepts are introduced in a manner to be highly-accessible to practicing engineers and lead to the practical implementation of an embedded board that can be used in various industrial fields as a control system and high speed data acquisition system. • Describes fundamentals of embedded systems design in an accessible manner; • Takes a problem-solving ...
PET/CT (and CT) instrumentation, image reconstruction and data transfer for radiotherapy planning
International Nuclear Information System (INIS)
Sattler, Bernhard; Lee, John A.; Lonsdale, Markus; Coche, Emmanuel
2010-01-01
The positron emission tomography in combination with CT in hybrid, cross-modality imaging systems (PET/CT) gains more and more importance as a part of the treatment-planning procedure in radiotherapy. Positron emission tomography (PET), as a integral part of nuclear medicine imaging and non-invasive imaging technique, offers the visualization and quantification of pre-selected tracer metabolism. In combination with the structural information from CT, this molecular imaging technique has great potential to support and improve the outcome of the treatment-planning procedure prior to radiotherapy. By the choice of the PET-Tracer, a variety of different metabolic processes can be visualized. First and foremost, this is the glucose metabolism of a tissue as well as for instance hypoxia or cell proliferation. This paper comprises the system characteristics of hybrid PET/CT systems. Acquisition and processing protocols are described in general and modifications to cope with the special needs in radiooncology. This starts with the different position of the patient on a special table top, continues with the use of the same fixation material as used for positioning of the patient in radiooncology while simulation and irradiation and leads to special processing protocols that include the delineation of the volumes that are subject to treatment planning and irradiation (PTV, GTV, CTV, etc.). General CT acquisition and processing parameters as well as the use of contrast enhancement of the CT are described. The possible risks and pitfalls the investigator could face during the hybrid-imaging procedure are explained and listed. The interdisciplinary use of different imaging modalities implies a increase of the volume of data created. These data need to be stored and communicated fast, safe and correct. Therefore, the DICOM-Standard provides objects and classes for this purpose (DICOM RT). Furthermore, the standard DICOM objects and classes for nuclear medicine (NM, PT) and
The ATLAS Data Acquisition and High Level Trigger system
International Nuclear Information System (INIS)
2016-01-01
This paper describes the data acquisition and high level trigger system of the ATLAS experiment at the Large Hadron Collider at CERN, as deployed during Run 1. Data flow as well as control, configuration and monitoring aspects are addressed. An overview of the functionality of the system and of its performance is presented and design choices are discussed.
Gaschler, Robert; Progscha, Johanna; Smallbone, Kieran; Ram, Nilam; Bilalić, Merim
2014-01-01
Learning curves have been proposed as an adequate description of learning processes, no matter whether the processes manifest within minutes or across years. Different mechanisms underlying skill acquisition can lead to differences in the shape of learning curves. In the current study, we analyze the tournament performance data of 1383 chess players who begin competing at young age and play tournaments for at least 10 years. We analyze the performance development with the goal to test the adequacy of learning curves, and the skill acquisition theories they are based on, for describing and predicting expertise acquisition. On the one hand, we show that the skill acquisition theories implying a negative exponential learning curve do a better job in both describing early performance gains and predicting later trajectories of chess performance than those theories implying a power function learning curve. On the other hand, the learning curves of a large proportion of players show systematic qualitative deviations from the predictions of either type of skill acquisition theory. While skill acquisition theories predict larger performance gains in early years and smaller gains in later years, a substantial number of players begin to show substantial improvements with a delay of several years (and no improvement in the first years), deviations not fully accounted for by quantity of practice. The current work adds to the debate on how learning processes on a small time scale combine to large-scale changes.
Lansky, Amy L.; Getoor, Lise C.; Friedland, Peter (Technical Monitor)
1994-01-01
COLLAGE is a domain-independent planner that differs from traditional planners in two key ways: (1) it uses a diverse and extendible set of (it action-based) plan constructions methods; and (2) it utilizes a technique called (it localization) to partition the planning problem into smaller (and potentially interacting) sub problems. In this paper, we describe these features and how they are exploited in two different real-world planning domains. The first domain, building construction planning, has served as a framework for us to investigate how localization can improve scalability. The second domain, data analysis planning, benefits from COLLAGE's unique plan construction and representation methods. In addition, we describe extensions that were necessary to tackle these real-world problems.
Energy Technology Data Exchange (ETDEWEB)
1994-09-01
The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Project Public Affairs Plan is to establish goals for the Fiscal Year 1995 UMTRA public affairs program and identify specific activities to be conducted during the year. It also describes the roles of various agencies involved in the conduct of the public affairs program and defines the functions of the Technical Assistance Contractor (TAC) Public Affairs Department. It integrates and replaces the Public Participation Plan (DOE/AL/62350-47D) and Public Information Plan (DOE/AL/623590-71). The plan describes the US Department of Energy`s (DOE) plans to keep stakeholders and other members of the public informed about project policies, plans, and activities, and provide opportunities for stakeholders and interested segments of the public to participate in project decision-making processes. The plan applies to the UMTRA Project Office; the DOE Albuquerque Operations Office, Office of Intergovernmental and External Affairs (OIEA); the UMTRA TAC; the UMTRA Remedial Action Contractor (RAC); and other cooperating agencies.
International Nuclear Information System (INIS)
1994-09-01
The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Project Public Affairs Plan is to establish goals for the Fiscal Year 1995 UMTRA public affairs program and identify specific activities to be conducted during the year. It also describes the roles of various agencies involved in the conduct of the public affairs program and defines the functions of the Technical Assistance Contractor (TAC) Public Affairs Department. It integrates and replaces the Public Participation Plan (DOE/AL/62350-47D) and Public Information Plan (DOE/AL/623590-71). The plan describes the US Department of Energy's (DOE) plans to keep stakeholders and other members of the public informed about project policies, plans, and activities, and provide opportunities for stakeholders and interested segments of the public to participate in project decision-making processes. The plan applies to the UMTRA Project Office; the DOE Albuquerque Operations Office, Office of Intergovernmental and External Affairs (OIEA); the UMTRA TAC; the UMTRA Remedial Action Contractor (RAC); and other cooperating agencies
Building an Undergraduate Book Approval Plan for a Large Academic Library
Directory of Open Access Journals (Sweden)
Denise Koufogiannakis
2007-05-01
Full Text Available The University of Alberta Libraries (UAL, working with two book vendors, created large-scale undergraduate book approval plans to deliver new publications. Detailed selections profiles were created for many subject areas, designed to deliver books that would have been obvious choices by subject selectors. More than 5800 monographs were received through the book approval plans during the pilot period. These volumes proved to be highly relevant to users, showing twice as much circulation as other monographs acquired during the same time period. Goals achieved through this project include: release of selectors’ time from routine work, systematic acquisition of a broadly based high-demand undergraduate collection and faster delivery of undergraduate materials. This successful program will be expanded and incorporated into UAL’s normal acquisitions processes for undergraduate materials.
Submicronic Particle Measurement Instrumentation Test Bench Data Acquisition and Control System
International Nuclear Information System (INIS)
Alberdi, J.; Barcala, J. M.; Sanz, D.; Gomez, F. J.; Molinero, A.; Navarrete, J. J.
1999-01-01
This document describes the SAD-100 system characteristics. The unit makes the instrumentation test bench data acquisition and control, SAD-100 was designed and developed by Electronic and Automation Area (CIEMAT) and Aerosol Technology in Energy Generation Project (CIEMAT). (Author) 2 refs
[First language acquisition research and theories of language acquisition].
Miller, S; Jungheim, M; Ptok, M
2014-04-01
In principle, a child can seemingly easily acquire any given language. First language acquisition follows a certain pattern which to some extent is found to be language independent. Since time immemorial, it has been of interest why children are able to acquire language so easily. Different disciplinary and methodological orientations addressing this question can be identified. A selective literature search in PubMed and Scopus was carried out and relevant monographies were considered. Different, partially overlapping phases can be distinguished in language acquisition research: whereas in ancient times, deprivation experiments were carried out to discover the "original human language", the era of diary studies began in the mid-19th century. From the mid-1920s onwards, behaviouristic paradigms dominated this field of research; interests were focussed on the determination of normal, average language acquisition. The subsequent linguistic period was strongly influenced by the nativist view of Chomsky and the constructivist concepts of Piaget. Speech comprehension, the role of speech input and the relevance of genetic disposition became the centre of attention. The interactionist concept led to a revival of the convergence theory according to Stern. Each of these four major theories--behaviourism, cognitivism, interactionism and nativism--have given valuable and unique impulses, but no single theory is universally accepted to provide an explanation of all aspects of language acquisition. Moreover, it can be critically questioned whether clinicians consciously refer to one of these theories in daily routine work and whether therapies are then based on this concept. It remains to be seen whether or not new theories of grammar, such as the so-called construction grammar (CxG), will eventually change the general concept of language acquisition.
Prevent, Counter, and Respond - A Strategic Plan to Reduce Global Nuclear Threats (FY 2016-FY2020)
Energy Technology Data Exchange (ETDEWEB)
None
2015-03-01
NNSA’s second core mission is reducing global nuclear dangers by preventing the acquisition of nuclear weapons or weapons-usable materials, countering efforts to acquire such weapons or materials, and responding to nuclear or radiological incidents. In 2015, NNSA reorganized its nonproliferation activities based on core competencies and realigned its counterterrorism and counterproliferation functions to more efficiently address both current and emerging threats and challenges. The reorganization accompanied the March 2015 release of the first ever Prevent, Counter, and Respond – A Strategic Plan to Reduce Global Nuclear Threats. This report, which NNSA will update annually, highlights key nuclear threat trends and describes NNSA’s integrated threat reduction strategy.
Preliminary Hanford Waste Vitrification Plan Waste Form Qualification Plan
International Nuclear Information System (INIS)
Nelson, J.L.
1987-09-01
This Waste Form Qualification Plan describes the waste form qualification activities that will be followed during the design and operation of the Hanford Waste Vitrification Plant to ensure that the vitrified Hanford defense high-level wastes will meet the acceptance requirements of the candidate geologic repositories for nuclear waste. This plan is based on the defense waste processing facility requirements. The content of this plan is based on the assumption that the Hanford Waste Vitrification Plant high-level waste form will be disposed of in one of the geologic repository projects. Proposed legislation currently under consideration by Congress may change or delay the repository site selection process. The impacts of this change will be assessed as details of the new legislation become available. The Plan describes activities, schedules, and programmatic interfaces. The Waste Form Qualification Plan is updated regularly to incorporate Hanford Waste Vitrification Plant-specific waste acceptance requirements and to serve as a controlled baseline plan from which changes in related programs can be incorporated. 10 refs., 5 figs., 5 tabs
Software development for a switch-based data acquisition system
Energy Technology Data Exchange (ETDEWEB)
Booth, A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Black, D.; Walsh, D. (Fermi National Accelerator Lab., Batavia, IL (United States))
1991-12-01
We report on the software aspects of the development of a switch-based data acquisition system at Fermilab. This paper describes how, with the goal of providing an integrated systems engineering'' environment, several powerful software tools were put in place to facilitate extensive exploration of all aspects of the design. These tools include a simulation package, graphics package and an Expert System shell which have been integrated to provide an environment which encourages the close interaction of hardware and software engineers. This paper includes a description of the simulation, user interface, embedded software, remote procedure calls, and diagnostic software which together have enabled us to provide real-time control and monitoring of a working prototype switch-based data acquisition (DAQ) system.
Subseabed-disposal program: systems-analysis program plan
International Nuclear Information System (INIS)
Klett, R.D.
1981-03-01
This report contains an overview of the Subseabed Nuclear Waste Disposal Program systems analysis program plan, and includes sensitivity, safety, optimization, and cost/benefit analyses. Details of the primary barrier sensitivity analysis and the data acquisition and modeling cost/benefit studies are given, as well as the schedule through the technical, environmental, and engineering feasibility phases of the program
Design of the M&S acquisition support effort of the SANDF GBADS acquisition programme
CSIR Research Space (South Africa)
Nel, JJ
2007-06-01
Full Text Available (AmADS) GBADS Phase 2 (MobADS) GBADS Phase 3 (LmADS) GBADS Phase 4 (C2 Optimisation) GBADS Phase 5 (MecADS) Figure 1: GBADS Phased Acquisition. The acquisition programme comprises five phases each addressing the acquisition of a specific... element of the GBADS. Phase 1 addresses an Air-mobile Air Defence System (AmADS) utilising man-portable missiles that can also be employed as a component of a Mobile Air Defence System (MobADS). Phase 2 involves the acquisition of the remainder...
An Inexpensive, Open-Source USB Arduino Data Acquisition Device for Chemical Instrumentation.
Grinias, James P; Whitfield, Jason T; Guetschow, Erik D; Kennedy, Robert T
2016-07-12
Many research and teaching labs rely on USB data acquisition devices to collect voltage signals from instrumentation. However, these devices can be cost-prohibitive (especially when large numbers are needed for teaching labs) and require software to be developed for operation. In this article, we describe the development and use of an open-source USB data acquisition device (with 16-bit acquisition resolution) built using simple electronic components and an Arduino Uno that costs under $50. Additionally, open-source software written in Python is included so that data can be acquired using nearly any PC or Mac computer with a simple USB connection. Use of the device was demonstrated for a sophomore-level analytical experiment using GC and a CE-UV separation on an instrument used for research purposes.
Software quality assurance plan for viscometer
International Nuclear Information System (INIS)
Gimera, M.
1994-01-01
The in situ viscometer is a portable instrument designed to raise and lower a sphere (rheometer ball) through layers of tank waste material while recording ball position, velocity, and cable tension. In the field, the viscometer attaches to a decontamination spool piece which in turn is designed to attach to any 4-inch, 150-pound flange (typical of many available tank risers). The motion of the ball and collection of data is controlled by instrumentation and control equipment housed in a separate remote control console. This document covers the product, Viscometer Data Acquisition Software. This document provides the software quality assurance plan, verification and validation plan, and configuration management plan for developing the software for the instrumentation that will be used to obtain rheology data from Tank SY-101
An Empirical Generative Framework for Computational Modeling of Language Acquisition
Waterfall, Heidi R.; Sandbank, Ben; Onnis, Luca; Edelman, Shimon
2010-01-01
This paper reports progress in developing a computer model of language acquisition in the form of (1) a generative grammar that is (2) algorithmically learnable from realistic corpus data, (3) viable in its large-scale quantitative performance and (4) psychologically real. First, we describe new algorithmic methods for unsupervised learning of…
The data acquisition system for the HERA H1 experiment
International Nuclear Information System (INIS)
Haynes, W.J.
1990-06-01
The HERA ep collider will set new challenges for the acquisition of data from large particle physics experiments. Short bunch-crossing times combined with high data rates imply sophisticated designs based on current technology. This paper describes how a multi-microprocessor system is being used at the H1 experiment. (author)
Neutral particle beam distributed data acquisition system
International Nuclear Information System (INIS)
Daly, R.T.; Kraimer, M.R.; Novick, A.H.
1987-01-01
A distributed data acquisition system has been designed to support experiments at the Argonne Neutral Particle Beam Accelerator. The system uses a host VAXstation II/GPX computer acting as an experimenter's station linked via Ethernet with multiple MicroVAX IIs and rtVAXs dedicated to acquiring data and controlling hardware at remote sites. This paper describes the hardware design of the system, the applications support software on the host and target computers, and the real-time performance
Experimental single-chip color HDTV image acquisition system with 8M-pixel CMOS image sensor
Shimamoto, Hiroshi; Yamashita, Takayuki; Funatsu, Ryohei; Mitani, Kohji; Nojiri, Yuji
2006-02-01
We have developed an experimental single-chip color HDTV image acquisition system using 8M-pixel CMOS image sensor. The sensor has 3840 × 2160 effective pixels and is progressively scanned at 60 frames per second. We describe the color filter array and interpolation method to improve image quality with a high-pixel-count single-chip sensor. We also describe an experimental image acquisition system we used to measured spatial frequency characteristics in the horizontal direction. The results indicate good prospects for achieving a high quality single chip HDTV camera that reduces pseudo signals and maintains high spatial frequency characteristics within the frequency band for HDTV.
IT-based Value Creation in Serial Acquisitions
DEFF Research Database (Denmark)
Henningsson, Stefan; Yetton, Philip
2013-01-01
serial acquirers realize IT-based value, we integrate and model the findings on individual acquisitions from the extant literature, and extend that model to explain the effects of sequential acquisitions in a growth-by-acquisition strategy. This extended model, drawing on the Resource-Based Theory......The extant research on post-acquisition IT integration analyzes how acquirers realize IT-based value in individual acquisitions. However, serial acquirers make 60% of acquisitions. These acquisitions are not isolated events, but are components in growth-by-acquisition programs. To explain how...
A data acquisition system for elementary particle physics
International Nuclear Information System (INIS)
Grittenden, J.A.; Benenson, G.; Cunitz, H.; Hsuing, Y.B.; Kaplan, D.M.; Sippach, W.; Stern, B.
1984-01-01
The data acquisition system experiment 605 at the Fermi National Accelerator Laboratory employs a set of data transfer protocols developed at Columbia University and implemented in the Nevis Laboratories Data Transport System. The authors describe the logical design of the Transport System, its physical realization, and its particular application during the Spring, 1982 data run of experiment 605. During that run it served as the interface between the data latches and a megabyte of fast memory, operating at a data transfer rate of 200 nsec/16-bit word. Up to two thousand events were read out during the one second beam spill, each event consisting of about 250 words. Included are details of proposed improvements to the data acquisition system and append a brief comment of the need for inexpensive, versatile readout systems in experimental elementary particle physics
Sea materials experimental plans
International Nuclear Information System (INIS)
1987-07-01
This Seal Materials Performance Test Plan describes the plan for testing materials that will be used to seal a high-level nuclear waste repository in salt at a proposed site in Deaf Smith County, Texas. The need for sealing and backfilling the repository and the use of various sealing materials are described. The seal materials include mined salt backfills, cementitious bulkheads and plugs, and earthen backfills. The laboratory testing program for characterizing the behavior and performance of these materials is described. This report includes plans for screening materials, evaluating candidate materials to be tested, and testing a representative set of materials
EXD HME MicroCT Data Acquisition, Processing and Data Request Overview
Energy Technology Data Exchange (ETDEWEB)
Seetho, Isaac M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Brown, William D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Jr., Harry E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
2016-12-06
This document is a short summary of the steps required for MicroCT evaluation of a specimen. This includes data acquisition through image analysis, for the EXD HME program. Expected outputs for each stage are provided. Data shall be shipped to LLNL as described herein.
48 CFR 970.2301 - Sustainable acquisition.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Sustainable acquisition. 970.2301 Section 970.2301 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY..., Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970.2301 Sustainable acquisition...
Acquisitions by EMNCs in Developed Markets
DEFF Research Database (Denmark)
Rabbiosi, Larissa; Elia, Stefano; Bertoni, Fabio
2012-01-01
Building on an organisational learning perspective, we argue that emerging market firms’ international experience and home-country characteristics are core sources of learning. Furthermore, we argue that these factors constitute important determinants of emerging market firms’ acquisition behaviour...... in developed countries (south-north acquisitions). We test our hypotheses on a sample of 808 south-north acquisitions. The acquisitions were undertaken in Europe, Japan and North America (Canada and the US) between 1999 and 2008 by firms from the emerging economies of Brazil, Russia, India and China....... As suggested by the internationalisation process model, our results show that emerging market firms undertake acquisitions in developed countries in an incremental fashion. Acquisition experience in developed markets increases the likelihood of exploitative expansion, while acquisition experience in developing...
Improving Acquisition Outcomes with Contextual Ambidexterity
DEFF Research Database (Denmark)
Meglio, Olimpia; King, David R.; Risberg, Annette
2015-01-01
The results of research on mergers and acquisitions often point to a need to improve acquisition outcomes and lessen the organizational turmoil that can often follow integration efforts. We assert that viewing acquisition integration through the lens of contextual ambidexterity may improve...... acquisition outcomes in two ways: by providing an integrated solution to the economic and social tensions in acquisitions, and by enabling managers to effectively confront the competing needs of task and human integration. We also posit that by building on contextual ambidexterity, we can extend...... the possibilities for both research and practice regarding task and human integration in acquisitions. We also emphasize the role of an integration manager and integration mechanisms in enabling contextual ambidexterity for successful acquisition integration. Finally, we identify implications for research...
Multiage Assessment: One School's Plan.
Arnold, Sue Beth; Kidwell, Barbara; Rossman, David
1998-01-01
Describes one elementary school's multiage assessment plan. Describes how standards were developed, and describes the assessment plan's guiding element: the progress report arranged as a continuum of objectives that serve as a goal indicator and a reporting mechanism. Discusses how objectives are assessed, record keeping and documentation, and the…
A modular and extensible data acquisition and control system for testing superconducting magnets
International Nuclear Information System (INIS)
Darryl F. Orris and Ruben H. Carcagno
2001-01-01
The Magnet Test Facility at Fermilab tests a variety of full-scale and model superconducting magnets for both R and D and production. As the design characteristics and test requirements of these magnets vary widely, the magnet test stand must accommodate a wide range of Data Acquisition (DAQ) and Control requirements. Such a system must provide several functions, which includes: quench detection, quench protection, power supply control, quench characterization, and slow DAQ of temperature, mechanical strain gauge, liquid helium level, etc. The system must also provide cryogenic valve control, process instrumentation monitoring, and process interlock logic associated with the test stand. A DAQ and Control system architecture that provides the functionality described above has been designed, fabricated, and put into operation. This system utilizes a modular approach that provides both extensibility and flexibility. As a result, the complexity of the hardware is minimized while remaining optimized for future expansion. The architecture of this new system is presented along with a description of the different technologies applied to each module. Commissioning and operating experience as well as plans for future expansion are discussed
Acquisition of HPLC-Mass Spectrometer
2015-08-18
31-Jan-2015 Approved for Public Release; Distribution Unlimited Final Report: Acquisition of HPLC -Mass Spectrometer The views, opinions and/or findings...published in peer-reviewed journals: Final Report: Acquisition of HPLC -Mass Spectrometer Report Title The acquisition of the mass spectrometer has been a
Imitation simulation of collective acquisition systems for nuclear-physical data
International Nuclear Information System (INIS)
Ryabov, Yu.F.; Khomutnikov, V.P.
1981-01-01
The imitation simulation method of collective investigation systems (CIS) oriented to the acquisition and express-processing of experiments performed on the basis of multi-beam research reactors under film data measurements by means of semiautomatic installations is described. The method is based on description of specific requests to the system as service phase sequences (small computer data acquisition, mass transfer in CIS, data bank record processing). The algorithm basis of these phases performed is delay imitation at each of the means employed. The structure of the simulating program is presented. The complex of programs is realized on the base of the NOST program packet for the M-4030 computer. Its efficiency in collective multiprogram systems investigation is shown [ru
Autonomous data acquisition system for Paks NPP process noise signals
International Nuclear Information System (INIS)
Lipcsei, S.; Kiss, S.; Czibok, T.; Dezso, Z.; Horvath, Cs.
2005-01-01
A prototype of a new concept noise diagnostics data acquisition system has been developed recently to renew the aged present system. This new system is capable of collecting the whole available noise signal set simultaneously. Signal plugging and data acquisition are performed by autonomous systems (installed at each reactor unit) that are controlled through the standard plant network from a central computer installed at a suitable location. Experts can use this central unit to process and archive data series downloaded from the reactor units. This central unit also provides selected noise diagnostics information for other departments. The paper describes the hardware and software architecture of the new system in detail, emphasising the potential benefits of the new approach. (author)
Marine spatial planning in Cyprus
Hadjimitsis, Diofantos; Agapiou, Athos; Mettas, Christodoulos; Themistocleous, Kyriacos; Evagorou, Evagoras; Cuca, Branka; Papoutsa, Christiana; Nisantzi, Argyro; Mamouri, Rodanthi-Elisavet; Soulis, George; Xagoraris, Zafiris; Lysandrou, Vasiliki; Aliouris, Kyriacos; Ioannou, Nicolas; Pavlogeorgatos, Gerasimos
2015-06-01
Marine Spatial Planning (MSP), which is in concept similar to land-use planning, is a public process by which the relevant Member State's authorities analyse and organise human activities in marine areas to achieve ecological, economic and social objectives. MSP aims to promote sustainable growth of maritime economies, sustainable development of marine areas and sustainable use of marine resources. This paper highlights the importance of MSP and provides basic outcomes of the main European marine development. The already successful MSP plans can provide useful feedback and guidelines for other countries that are in the process of implementation of an integrated MSP, such as Cyprus. This paper presents part of the MSP project, of which 80% funded by the European Regional Development Fund (ERDF) and 20% from national contribution. An overview of the project is presented, including data acquisition, methodology and preliminary results for the implementation of MSP in Cyprus.
Energy Technology Data Exchange (ETDEWEB)
Spencer, Charles G
2012-12-01
The accomplishments to date and the long-range planning of the Y-12 Energy Management and Sustainability and Stewardship programs support the U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) vision for a commitment to energy effi ciency and sustainability and to achievement of the Guiding Principles. Specifi cally, the Y-12 vision is to support the Environment, Safety and Health Policy and the DOE Strategic Sustainability Performance Plan, while promoting overall sustainability and reduction of greenhouse gas emissions. The mission of the Y-12 Energy Management program is to incorporate energy-effi cient technologies site-wide and to position Y-12 to meet NNSA energy requirement needs through 2025 and beyond. The plan addresses greenhouse gases, buildings, fleet management, water use, pollution prevention, waste reduction, sustainable acquisition, electronic stewardship and data centers, site innovation and government-wide support.
Computerised tomography in radiotherapy planning
International Nuclear Information System (INIS)
Badcock, P.C.
1983-01-01
This study evaluates the effectiveness of computed tomography as an adjunct to radiotherapy planning. Until recently, acquisition of accurate data concerning tumour anatomy lagged behind other developments in radiotherapy. With the advent of computer-tomography (CT), these data can be displayed and transmitted to a treatment planning computer. It is concluded that the greatest inaccuracies in the radiation treatment of patients are to be found in both the inadequate delineation of the target volume within the patient and changes in body outline relative to the target volume over the length of the irradiated volume. The technique was useful in various subgroups (pelvic, intra-thoracic and chest-wall tumours) and for those patients being treated palliatively. With an estimated improvement in cure rate of 4.5% and cost-effective factors of between 3.3 and 5, CT-assisted radiotherapy planning appears to be a worthwhile procedure. (orig.)
Planning Related to the Curation and Processing of Returned Martian Samples
McCubbin, F. M.; Harrington, A. D.
2018-04-01
Many of the planning activities in the NASA Astromaterials Acquisition and Curation Office at JSC are centered around Mars Sample Return. The importance of contamination knowledge and the benefits of a mobile/modular receiving facility are discussed.
48 CFR 11.304 - Contract clause.
2010-10-01
... Section 11.304 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Acceptable Material 11.304 Contract clause. Insert the clause at 52.211-5, Material Requirements, in solicitations and contracts for supplies that are not commercial items. ...
WiFi Data Acquisition System Applied to a Photovoltaic Powered Water Pumping Plant
Directory of Open Access Journals (Sweden)
Sandro César Silveira JUCÁ
2015-02-01
Full Text Available The present paper describes how to design and assemble a low cost online monitoring and WiFi data acquisition system using free software applied to microgeneration based on renewable energy sources. The development of online monitoring systems for microgeneration plants based on renewable energy sources is becoming more important, considering that monitoring and data acquisition systems are applicable in stages of the microgeneration process. The monitoring and data acquisition WiFi system was developed using an embedded WiFi modem (Wifly coupled to a microcontrolled board based on the free tool SanUSB. This monitoring system was applied to a photovoltaic (PV water pumping plant without batteries, so as the control system and the wireless communication with the online server, which is also autonomous and powered by PV panel. The free software for online monitoring and WiFi data acquisition allows the analysis of stored data and charts through mobile devices as notebooks, tablets and smartphones.
A data acquisition and analysis system for the RIBLL
Wenlong, Z; Zhong Yan, G; Guoqing, X; Jin Chuan W; Jia Xing, L; Xiang Wei, M; Shanhong, J; Lijun, Q; Quanjin, W
2000-01-01
The Radioactive Ion Beam Line in Lanzhou (RIBLL) is described. This system has been connected to a 100 M Ethernet and is run on the NT platform of MS windows. The system has adopted CAMAC specification and incorporates PAW and CERNLIB from CERN. It is a powerful and flexible data acquisition and analysis system with a rate of ~640 Kb /s. (4 refs).
Data acquisition, handling, and display for the heater experiments at Stripa
Energy Technology Data Exchange (ETDEWEB)
McEvoy, M.B.
1979-02-01
In June 1978, a joint Swedish/American research team began acquiring data from the Stripa mine in Sweden, 340 m below the surface. Electrical heaters are used to assess the suitability of granite rock as a repository for radioactive waste material. Extensive instrumentation also measures temperature, stress, and displacement effects caused by these heaters. This report describes the data acquisition system, its design considerations, capabilities, and operational use. The techniques employed to detect and analyze any anomalous experimental results are also described. Environmental considerations are described in an appendix.
Project Execution Plan,Rev. 3; FINAL
International Nuclear Information System (INIS)
IT Corporation, Las Vegas
2002-01-01
This plan addresses project activities encompassed by the U.S. Department of Energy's (DOE's), National Nuclear Security Administration Nevada Operations Office, Environmental Restoration Division and conforms to the requirements contained in the Life-Cycle Asset Management, DOE Order 430.1A; The Joint Program Office Policy on Project Management in Support of DOE Order 430.1; Program and Project Management for the Acquisition of Capital Assets, DOE Order 413.3; the Project Execution and Engineering Management Planning Guide, GPG-FM-010; and other applicable Good Practice Guides; and the FY 2001 Integrated Planning, Accountability, and Budgeting System Policy Guidance. The plan also reflects the milestone philosophies of the Federal Facility Agreement and Consent Order, as agreed to by the State of Nevada, the DOE, and the U.S. Department of Defense; and traditional project management philosophies such as the development of life-cycle costs, schedules, and work scope; identification o f roles and responsibilities; and baseline management and controls
Omoragbon, Amen
Although, the Aerospace and Defense (A&D) industry is a significant contributor to the United States' economy, national prestige and national security, it experiences significant cost and schedule overruns. This problem is related to the differences between technology acquisition assessments and aerospace vehicle conceptual design. Acquisition assessments evaluate broad sets of alternatives with mostly qualitative techniques, while conceptual design tools evaluate narrow set of alternatives with multidisciplinary tools. In order for these two fields to communicate effectively, a common platform for both concerns is desired. This research is an original contribution to a three-part solution to this problem. It discusses the decomposition step of an innovation technology and sizing tool generation framework. It identifies complex multidisciplinary system definitions as a bridge between acquisition and conceptual design. It establishes complex multidisciplinary building blocks that can be used to build synthesis systems as well as technology portfolios. It also describes a Graphical User Interface Designed to aid in decomposition process. Finally, it demonstrates an application of the methodology to a relevant acquisition and conceptual design problem posed by the US Air Force.
International Nuclear Information System (INIS)
1995-09-01
The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Project Public Affairs Plan is to establish goals for the fiscal year (FY) 1996 UMTRA Project public affairs program and to identify specific activities to be conducted during the year. It describes the roles of various agencies involved in the public affairs program and defines the functions of the UMTRA Project Technical Assistance Contractor (TAC) Public Affairs Department. It replaces the FY 1995 Public Affairs Plan (DOE/AL/62350-154). The plan also describes the US Department of Energy's (DOE) plans to keep stakeholders and other members of the public informed about UMTRA Project policies, plans, and activities, and provide opportunities for stakeholders and interested segments of the public to participate in UMTRA Project decision-making processes. The plan applies to the UMTRA Project Team; the DOE Grand Junction Projects Office (GJPO); the DOE Albuquerque Operations Office, Office of Public Affairs (OPA); the TAC; the UMTRA Project Remedial Action Contractor (RAC); and other cooperating agencies
MDAS2: A Data Acquisition System for the Soil Mechanic Laboratory
International Nuclear Information System (INIS)
Alberdi, J.; Barcala, J. M.
2000-01-01
The Soil Mechanic Laboratory in CIEMAT is working to characterize a bentonite which may be use in the storage of radioactive waste. The bentonite is studied with several tests, frequently used in soil mechanics. This document describes the data acquisition system used in one of these experiments
The effect of mergers and acquisitions on behavioral health care.
Lazarus, A
1995-01-01
The consolidation of America's managed health care industry rivals any corporate raider scenario. Unlike previous merger booms, however, health care unions in the 1990s have been strategically planned. Particular attention is paid to merger activity in the behavioral health care field. Ultimately, the author writes, mergers will bring greater efficiency and lower costs to health care but also less choice for patients. Unless providers and payers pay close attention to the human side of mergers and acquisitions, new alliances are likely to fall short of their goals.
Energy Technology Data Exchange (ETDEWEB)
NONE
1995-12-11
Various problems on intelligent planning (IP) and the tendency of basic technology were investigated. For each technique of IP, a Petri net and mark graph have been widely used as the modeling and analysis methods of a discrete event system. Moreover, various planning problems were modeled by a traveling salesman problem, and the efficient solution of the traveling salesman problem has been studied simultaneously. The tendency of the basic technology and application system viewed from an example of intelligent plant planning was investigated as an applied field of planning technology, with importance attached to the production system and robot planning. In the scheduling technology of the production system, the activation of an AI study and a new theory (i.e., architecture study) based on natural science information was investigated with the transition in the world as a trigger. A robot system has been planned in a wide range such as the environmental information acquisition planning of a robot. 202 refs., 69 figs., 4 tabs.
Liu, Hu; Su, Rong-jia; Wu, Min-jie; Zhang, Yi; Qiu, Xiang-jun; Feng, Jian-gang; Xie, Ting; Lu, Shu-liang
2012-06-01
To form a wound information management scheme with objectivity, standardization, and convenience by means of wound information management system. A wound information management system was set up with the acquisition terminal, the defined wound description, the data bank, and related softwares. The efficacy of this system was evaluated in clinical practice. The acquisition terminal was composed of the third generation mobile phone and the software. It was feasible to get access to the wound information, including description, image, and therapeutic plan from the data bank by mobile phone. During 4 months, a collection of a total of 232 wound treatment information was entered, and accordingly standardized data of 38 patients were formed automatically. This system can provide standardized wound information management by standardized techniques of acquisition, transmission, and storage of wound information. It can be used widely in hospitals, especially primary medical institutions. Data resource of the system makes it possible for epidemiological study with large sample size in future.
Monitoring plan for borehole logging at 216-Z-1A Tile Field, 216-Z-9 Trench, and 216-Z-12 Crib
International Nuclear Information System (INIS)
Horton, D.G.
1998-04-01
This plan describes the fiscal year 1998 vadose monitoring of three inactive, liquid waste disposal facilities associated with the Plutonium Finishing Plant (Z-Plant): the 216-Z-1A Tile Field, the 216-Z-9 Trench, and the 216-Z-12 Crib. Monitoring will consist of spectral gamma ray logging of 21 boreholes. This plan describes the physical characteristics of the facilities, their operational histories, the subsurface geology and known contamination distribution at each facility. The plan then describes the specific monitoring to be done including the boreholes to be logged, the methods of data acquisition, data reduction, and data evaluation, and finally, the quality control, data management and data reporting for this effort. The three liquid waste disposal facilities at the Z Plant were chosen to be monitored because they were identified as containing some of the most significant sources of radioactive contamination in the Hanford vadose zone. Johnson's analysis was based on the relative hazard obtained by combining curie quantities disposed to the facilities with appropriate health risk standards. The basic question to be addressed by this logging activity addresses the configuration of subsurface contamination since it was last measured. Historical data from the 216-Z-1A Tile Field, the 216-Z-9 Trench, and the 216-Z-12 Crib form the baseline for comparisons to answer this question
First Language Acquisition and Teaching
Cruz-Ferreira, Madalena
2011-01-01
"First language acquisition" commonly means the acquisition of a single language in childhood, regardless of the number of languages in a child's natural environment. Language acquisition is variously viewed as predetermined, wondrous, a source of concern, and as developing through formal processes. "First language teaching" concerns schooling in…
The processes of mergers and acquisitions in the Russian banking business
Directory of Open Access Journals (Sweden)
Gritsenko S. E.
2017-02-01
Full Text Available the article is dedicated to the changes in the banking sector due to sales and aggregation of the small and medium-sized banks. This paper describes the processes of consolidation and aggregation of the banking sector in Russia, it analyses the dynamics of the M&A deals and identifies the main trends in this market segment for 2017–2018. Based on the overview of the Russian M&A market (M&A means mergers and acquisitions in the banking sector for the past years a conclusion is drawn about the aims and rationale of the modern processes of mergers and acquisitions in the Russian banking business.
2011-11-02
... Acquisition Circular 2005-54; Small Entity Compliance Guide AGENCY: Department of Defense (DoD), General... Federal Acquisition Circular (FAC) 2005-54, which amend the Federal Acquisition Regulation (FAR... (FAR Case 2009-006) This final rule amends the FAR to implement Executive Order (E.O.) 13494, Economy...
2010-04-13
... Acquisition Circular 2005-41; Small Entity Compliance Guide AGENCIES: Department of Defense (DoD), General... Federal Acquisition Circular (FAC) 2005-41 which amends the Federal Acquisition Regulation (FAR... projects where the total cost to the Government is $25 million or more in order to promote economy and...
Indexing mergers and acquisitions
Gang, Jianhua; Guo, Jie (Michael); Hu, Nan; Li, Xi
2017-01-01
We measure the efficiency of mergers and acquisitions by putting forward an index (the ‘M&A Index’) based on stochastic frontier analysis. The M&A Index is calculated for each takeover deal and is standardized between 0 and 1. An acquisition with a higher index encompasses higher efficiency. We find that takeover bids with higher M&A Indices are more likely to succeed. Moreover, the M&A Index shows a strong and positive relation with the acquirers’ post-acquisition stock perfo...
75 FR 14057 - Federal Acquisition Regulation; Federal Acquisition Circular 2005-40; Introduction
2010-03-23
... the Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) in..., consider all the information in FAPIIS and PPIRS when making a responsibility determination, and notify the... appropriate for the official's consideration; and Enter a non-responsibility determination into FAPIIS. The...
75 FR 53127 - Federal Acquisition Regulation; Federal Acquisition Circular 2005-45; Introduction
2010-08-30
... summarizes the Federal Acquisition Regulation (FAR) rules agreed to by the Civilian Agency Acquisition... Chambers. Cost or Pricing Data. III American Recovery 2009-008 Davis. and Reinvestment Act of 2009 (the Recovery Act)-- Buy American Requirements for Construction Materials. SUPPLEMENTARY INFORMATION: Summaries...
Programme RAE: software that automates data acquisition in nuclear spectroscopy
International Nuclear Information System (INIS)
Bellido, Luis F.
1995-07-01
A software for automatic acquisition and storing of nuclear spectra was developed. This program is to be used in a system composed of a radiation detector, a Spectrum-ACE or ADCAM and the Maestro II emulation software. In this paper the operating mode is fully described and several examples are given. (author). 2 refs
Gurowitz, William D.; And Others
1988-01-01
Describes how Division of Campus Life at Cornell University conducted long-range planning and the results of its 2-year effort. Explains 2 (strategic and organizational) by 3 (diagnosis, formulation, and execution) matrix providing systems view from describing and evaluating long-range planning. Presents 10-step process implemented at Cornell. (NB)
ORELA data acquisition system hardware. Volume 1: introduction
International Nuclear Information System (INIS)
Reynolds, J.W.
1977-01-01
The Oak Ridge Electron Linear Accelerator Facility (ORELA) has been specifically designed as a facility for neutron cross-section measurements by the time-of-flight technique. ORELA was designed so that a number of cross-section experiments can be performed simultaneously. This goal of simultaneous operation of several experiments, a maximum of six to date, has been achieved by using the multiple flight paths radiating from the target room, the multiple flight stations on each flight path, the laboratory facilities surrounding the central data area, and a shared data acquisition computer system. The flight stations contain the fast electronics for initial processing of the nuclear detector signals on a time scale of nanoseconds. The laboratories, and in some cases the flight stations, contain the equipment to digitize the nanosecond detector signals on a time scale of a few microseconds. At this point, the data passes into the ORELA Data Acquisition portion of the ORELA Data Handling System. An introduction to the ORELA Data Acquisition System is given, and the component parts of the system are briefly reviewed. Each specifically designed piece of hardware is briefly described with a simplified block diagram. Modifications to standard peripheral devices are reviewed. A list of drawings and programming notes are also included
48 CFR 1511.011-79 - Information resources management.
2010-10-01
... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Information resources management. 1511.011-79 Section 1511.011-79 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY ACQUISITION PLANNING DESCRIBING AGENCY NEEDS 1511.011-79 Information resources management. The...
48 CFR 811.204 - Contract clause.
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contract clause. 811.204 Section 811.204 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS COMPETITION AND ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Using and Maintaining Requirements Documents 811.204 Contract...