WorldWideScience

Sample records for abbott prism positive

  1. Collaborative evaluation of the Abbott Avantage system for identification of frequently isolated nonfermentative or oxidase-positive gram-negative bacilli.

    Jorgensen, J H; Dyke, J W; Helgeson, N G; Cooper, B. H.; Redding, J S; Crawford, S. A.; Andruszewski, M T; Prowant, S A

    1984-01-01

    The capability of the Abbott Avantage system to identify 10 species of commonly isolated glucose nonfermentative or oxidase-positive gram-negative bacilli in a 5-h test period was evaluated in a collaborative study. The Avantage nonenteric data base uses 20 biochemical test reactions performed in an expanded Abbott bacterial identification cartridge plus the results of a manual oxidase test. The species included in the Avantage data base are Acinetobacter anitratus, Acinetobacter Iwoffi, Aero...

  2. Abbott Infant Formula Recall

    U.S. Department of Health & Human Services — This list includes products subject to recall since September 2010 related to infant formula distributed by Abbott. This list will be updated with publicly...

  3. Solving the Camera Intrinsic Parameters with the Positive Tri-prism Based on the Circular Points

    Hui Wang

    2012-01-01

    Full Text Available This study proposed a method of camera self-calibration with the positive tri-prism. The coordinates of circular points can be obtained through the properties of positive tri-prism. According to the theory of projective transformation, the coordinates of the vanishing points of each edges of positive tri-prism can be obtained. After that, combined with the corollary of Laguerre theorem (the infinity points of two mutually perpendicular lines and the circular points harmonic conjugate, one can obtain the image coordinates of the circular points. By computing coordinates of whole the circular points in an image, according to the constraints on the intrinsic parameters which are established through image of the absolute-conic, we can obtain the intrinsic parameters linearly. The method algorithm has been tested on both computer simulated data and real data. The technique only required single target image and the orientation of camera did not need to be known. The results gained considerable robustness.

  4. FDA Abbott Infant Formula Recall

    U.S. Department of Health & Human Services — On September 22, 2010, Abbott issued a voluntary recall of certain Similac powdered infant formula after identifying a common warehouse beetle (both larvae and...

  5. Technology evaluation: ABT-510, Abbott.

    Westphal, J.R.

    2004-01-01

    ABT-510 is a small peptide thrombospondin-1 mimetic angiogenesis inhibitor under development by Abbott Laboratories for the potential treatment of solid tumors. ABT-510 is undergoing phase II clinical trials.

  6. Spatial representations of the city and daily mobility through the prism of social positions

    Dias, Pierre

    2016-01-01

    Ever since the earliest forms of urbanism, cities have been shaped by ideological constructs that impact the everyday life of individuals and socio-spatial segregations. This PhD thesis focuses specifically on how positions in the social structure are objectified in the representations and everyday practice of urban space. Based on study of five different socio-spatial representations among University of Strasbourg staffers, it evidences a principle of structural homology between the cognitiv...

  7. Technology evaluation: adalimumab, Abbott laboratories.

    Lorenz, Hanns M

    2002-04-01

    Adalimumab (D2E7), a human monoclonal antibody that binds to and neutralizes TNFa, is being developed by Abbott (formerly Knoll), under license from Cambridge Antibody Technology (CAT), for the potential treatment of inflammatory disorders such as rheumatoid arthritis (RA) and Crohn's disease. It is also being investigated for the potential treatment of coronary heart disease. Phase II studies for Crohn's disease and phase III for RA were ongoing throughout 2001. Limited data are only available for RA. In January 2002, it was reported that phase III trials of adalimumab for RA had been completed, but details have not been published in the primary literature so far. At this time CAT and Abbott expected to file for US approval in the second quarter of 2002 with a launch date anticipated for 2003. Phase III data are expected to be presented at the European League Against Rheumatism meeting in June 2002. In November 2000, Lehman Brothers predicted a US launch in June 2002 with peak US sales of $600 million in 2007 and a launch in non-US markets in 2003 with peak sales in these markets of $300 million in 2008. In December 2000, Merrill Lynch predicted regulatory clearance in the second half of 2003. The probability of adalimumab reaching the market is estimated to be 70%. In December 2000, Merrill Lynch predicted a 2003 launch, with estimated sales of pounds sterling 3.65 million in that year rising to pounds sterling 30.14 million in 2010. In March 2001, ABN AMRO predicted sales of $73 million in 2003 rising to $392 million in 2007. PMID:12044041

  8. 75 FR 80061 - Abbott Laboratories, Inc.; Withdrawal of Approval of a New Drug Application for MERIDIA

    2010-12-21

    ... HUMAN SERVICES Food and Drug Administration Abbott Laboratories, Inc.; Withdrawal of Approval of a New... (sibutramine hydrochloride (HCl)) oral capsules held by Abbott Laboratories, Inc. (Abbott), 100 Abbott Park Rd., Abbott Park, IL 60064. Abbott has voluntarily requested that approval of this application be...

  9. 77 FR 13232 - Abbott Laboratories; Filing of Food Additive Petition

    2012-03-06

    ... HUMAN SERVICES Food and Drug Administration 21 CFR Part 172 Abbott Laboratories; Filing of Food Additive... Administration (FDA) is announcing that Abbott Laboratories has filed a petition proposing that the food additive...))), notice is given that a food additive petition (FAP 2A4788) has been filed by Abbott Laboratories,...

  10. Clinical laboratory evaluation of the Abbott MS-2 automated antimicrobial susceptibility testing system: report of a collaborative study.

    Thornsberry, C; Anhalt, J P; Washington, J A; McCarthy, L R; Schoenknecht, F D; Sherris, J. C.; Spencer, H J

    1980-01-01

    The MS-2 system (Abbott Diagnostics, Division of Abbott Laboratories, Dallas, Tex.) was evaluated for its efficacy in determining the susceptibilities of both clinical and selected challenge (nonfastidious, facultative, and aerobic) isolates. The MS-2 results were compared with standard Kirby-Bauer disk diffusion and microdilution results by using fresh clinical isolates. For gram-positive isolates other than enterococci, overall agreement between MS-2 and reference results was 93 to 98%. Wit...

  11. Cethromycin: A-195773, A-195773-0, A-1957730, Abbott-195773, ABT 773.

    2007-01-01

    Cethromycin [ABT 773, A-195773, Abbott-195773, A-1957730, A-195773-0] is a once-daily ketolide antibiotic that originated from Abbott Laboratories' research into next-generation compounds to the macrolide antibacterial, clarithromycin. The aim of the research programme was to maintain the positive attributes of clarithromycin and to add the property of efficacy against macrolide-resistant organisms. Cethromycin acts by binding to the 23S molecule of the 50S ribosomal subunit. Advanced Life Sciences is conducting multinational, pivotal phase III trials of cethromycin for the treatment of mild-to-moderate community-acquired pneumonia, phase II/III trials for treatment of acute bacterial sinusitis, as well as preclinical trials for the treatment of anthrax. Advanced Life Sciences plans to advance discussions with prospective commercialisation partners for cethromycin during 2006. Abbott Laboratories and Taisho Pharmaceutical entered a collaboration to develop and commercialise new macrolide antibacterials in October 1997. Each company brought its existing macrolides into the collaboration and both companies were to jointly develop novel new macrolides. Abbott was to have exclusive marketing, manfacturing and supply rights worldwide (except in Japan) to any compounds resulting from this collaboration. Taisho was to receive royalties on Abbott's sales in consideration of granted rights. In Japan, the two companies were to co-market any resulting macrolide antibacterials. This agreement extended to the development of cethromycin; however, the agreement was suspended in April 2004 and appears to have been terminated. Abbott exclusively licensed cethromycin to Advanced Life Sciences worldwide excluding Japan in December 2004. Advanced Life Sciences initiated commercial manufacturing agreements for cethromycin with DSM and Cardinal Health in May 2006. In March 2006, Advanced Life Sciences completed private placement of $US36 million from which the net proceeds will be used

  12. Octagonal prism shaped lithium iron phosphate composite particles as positive electrode materials for rechargeable lithium-ion battery

    Highlights: • Octagonal prism shaped LiFePO4 particles are prepared. • A boiling reflux assisted annealing method is developed to prepare LiFePO4. • Carbon sources with different structures may determine the morphologies of LiFePO4. - Abstract: For the first time, octagonal prism shaped lithium iron phosphate (LiFePO4) composite particles supported on the multi-walled carbon nanotubes (MWNTs) (denoted as OP-LiFePO4/MWNTs) are prepared by using a boiling reflux assisted calcination method. Interestingly, spherical LiFePO4 composite particles (indexed as S-LiFePO4/C) are produced by the same procedure in the presence of activated carbon. It is observed that the edge length of OP-LiFePO4 particles is about 400 nm as compared to the particle size of S-LiFePO4 (∼150 nm) sample. Cyclic voltammetry (CV) tests demonstrate that at the scan rate of 0.5 mVs−1 the potential separation of the OP-LiFePO4 sample (about 250 mV) is much smaller than that of S-LiFePO4 (about 443 mV). More importantly, the initial discharge capacities at 0.1 and 1.0 C for the OP-LiFePO4/MWNTs are 160.58 and 116.71 mAhg−1, higher than that of S-LiFePO4/C (151.29 and 95.69 mAhg−1 at 0.1 and 1.0 C)

  13. Prism Window for Optical Alignment

    Tang, Hong

    2008-01-01

    A prism window has been devised for use, with an autocollimator, in aligning optical components that are (1) required to be oriented parallel to each other and/or at a specified angle of incidence with respect to a common optical path and (2) mounted at different positions along the common optical path. The prism window can also be used to align a single optical component at a specified angle of incidence. Prism windows could be generally useful for orienting optical components in manufacture of optical instruments. "Prism window" denotes an application-specific unit comprising two beam-splitter windows that are bonded together at an angle chosen to obtain the specified angle of incidence.

  14. 77 FR 4368 - Abbott Laboratories, Diagnostics Division, Including On-Site Leased Workers From Manpower...

    2012-01-27

    ... Employment and Training Administration Abbott Laboratories, Diagnostics Division, Including On-Site Leased... for Worker Adjustment Assistance on February 24, 2011, applicable to workers of Abbott Laboratories... location of Abbott Laboratories, Diagnostics Division. The Department has determined that these...

  15. Deborah Abbott: Out in the Redwoods, Documenting Gay, Lesbian, Bisexual, Transgender History at the University of California, SAnta Cruz, 1965-2003

    Reti, Irene H.; Brashear, Regan; Abbott, Deborah

    2004-01-01

    Deborah Abbott is a writer, health activist, teacher, river guide and current director of the Gay, Lesbian, Bisexual and Transgender Resource Center at UCSC. Since assuming her position in November of 1997, she has given new shape and direction to the Center. As an American studies major, I was eager to interview  Deb Abbott. Deb Abbott to learn more about the queer history of UCSC, as well as about her work within two local feminist health organizations: the Santa Cruz Women's Health Collect...

  16. Australopithecine enamel prism patterns.

    Vrba, E S; Grine, F E

    1978-11-24

    Following a recent suggestion that tooth enamel prism shape differs within Hominoidea, the teeth of a number of extinct and extant hominoid species were analyzed by scanning electron microscopy. The enamel prism patterns of some gracile and robust australopithecine specimens from Sterkfontein, Swartkrans, and Kromdraai are recorded. The characteristic arrangements of enamel prisms in all modern and extinct hominoid species were found to be essentially similar. The implications of enamel prisms for phylogenetic deduction in Hominoidea are discussed. PMID:102032

  17. Performance of the new automated Abbott RealTime MTB assay for rapid detection of Mycobacterium tuberculosis complex in respiratory specimens.

    Chen, J H K; She, K K K; Kwong, T-C; Wong, O-Y; Siu, G K H; Leung, C-C; Chang, K-C; Tam, C-M; Ho, P-L; Cheng, V C C; Yuen, K-Y; Yam, W-C

    2015-09-01

    The automated high-throughput Abbott RealTime MTB real-time PCR assay has been recently launched for Mycobacterium tuberculosis complex (MTBC) clinical diagnosis. This study would like to evaluate its performance. We first compared its diagnostic performance with the Roche Cobas TaqMan MTB assay on 214 clinical respiratory specimens. Prospective analysis of a total 520 specimens was then performed to further evaluate the Abbott assay. The Abbott assay showed a lower limit of detection at 22.5 AFB/ml, which was more sensitive than the Cobas assay (167.5 AFB/ml). The two assays demonstrated a significant difference in diagnostic performance (McNemar's test; P = 0.0034), in which the Abbott assay presented significantly higher area under curve (AUC) than the Cobas assay (1.000 vs 0.880; P = 0.0002). The Abbott assay demonstrated extremely low PCR inhibition on clinical respiratory specimens. The automated Abbott assay required only very short manual handling time (0.5 h), which could help to improve the laboratory management. In the prospective analysis, the overall estimates for sensitivity and specificity of the Abbott assay were both 100 % among smear-positive specimens, whereas the smear-negative specimens were 96.7 and 96.1 %, respectively. No cross-reactivity with non-tuberculosis mycobacterial species was observed. The superiority in sensitivity of the Abbott assay for detecting MTBC in smear-negative specimens could further minimize the risk in MTBC false-negative detection. The new Abbott RealTime MTB assay has good diagnostic performance which can be a useful diagnostic tool for rapid MTBC detection in clinical laboratories. PMID:26071001

  18. Berenice Abbott (1898-1991, photographies

    Juliette Mélia

    2012-05-01

    Full Text Available C’est la première fois que Berenice Abbott est exposée à Paris. Les cent vingt images et trente documents présentés au Jeu de Paume sont regroupés en quatre grandes séries, qui correspondent aux quatre grandes phases de sa carrière photographique. La première partie retrace son œuvre de portraitiste, qui commence à Paris au début des années 1920, où elle photographie des anonymes, mais aussi beaucoup d’artistes et d’écrivains tels que Marcel Duchamp, Jean Cocteau, James Joyce, ou encore Djuna...

  19. Collaborative evaluation of the Abbott yeast identification system.

    Cooper, B. H.; Prowant, S; B. Alexander; Brunson, D H

    1984-01-01

    The Abbott yeast identification system (Abbott Laboratories, Diagnostics Division, Irving, Tex.) is a 24-h, instrumental method for identifying medically important yeasts, based on matrix analysis of 19 biochemical reactions and the germ tube test. The system was evaluated in two clinical laboratories by using 179 coded isolates, which included a high percentage of the less frequently encountered species. Based upon results with these coded isolates and from previously obtained laboratory dat...

  20. Multisite Analytical Evaluation of the Abbott ARCHITECT Cyclosporine Assay.

    Wallemacq, Pierre; Maine, Gregory,; Berg, Keith; Rosiere, Thomas; Marquet, Pierre; Aimo, Giuseppe; Mengozzi, Giulio; Young, Juliana; Wonigert, Kurt; Krestchmer, Robert; Wermuth, Bendicht; Schmid, Rainer,

    2010-01-01

    International audience The objective of this study was to evaluate the analytical performance of the Abbott ARCHITECT Cyclosporine (CsA) immunoassay in 7 clinical laboratories in comparison to liquid chromatography/tandem mass spectrometry (LC/MS/MS), Abbott TDx, Cobas Integra 800, and the Dade Dimension Xpand immunoassay. The ARCHITECT assay uses a whole blood specimen, a pretreatment step with organic reagents to precipitate proteins and extract the drug, followed by a 2-step automated i...

  1. Viterbi training in PRISM

    Sato, Taisuke; Kubota, Keiichi

    2013-01-01

    VT (Viterbi training), or hard EM, is an efficient way of parameter learning for probabilistic models with hidden variables. Given an observation $y$, it searches for a state of hidden variables $x$ that maximizes $p(x,y \\mid \\theta)$ by coordinate ascent on parameters $\\theta$ and $x$. In this paper we introduce VT to PRISM, a logic-based probabilistic modeling system for generative models. VT improves PRISM in three ways. First VT in PRISM converges faster than EM in PRISM due to the VT's t...

  2. The PRISM Benchmark Suite

    Kwiatkowsa, Marta; Norman, Gethin; Parker, David

    2012-01-01

    We present the PRISM benchmark suite: a collection of probabilistic models and property specifications, designed to facilitate testing, benchmarking and comparisons of probabilistic verification tools and implementations.

  3. Analýza marketingové komunikace divize Abbott Diabetes Care, spol. Abbott Laboratories, s.r.o.

    Iblová, Mirka

    2009-01-01

    This dissertation discusses the analysis of marketing communication within Abbott Laboratories Ltd. division of Abbott Diabetes Care, which carry business within the market of pharmaceutical industry. Prior to the analysis, the focus is on the theoretical part of the traditional components of the communication mix. In the practical part, the theoretical knowledge is then applied to the chosen example of the company. On the basis of performed analysis, recommendations are proposed in order to ...

  4. Penta prism laser polarizer.

    Lotem, H; Rabinovitch, K

    1993-04-20

    A novel type of laser prism polarizer is proposed. The polarizer is characterized by a high transmission efficiency, a high optical damage threshold, and a high extinction ratio. The polarizer is shaped like a regular penta prism and, thus, it is a constant deviation angle device. Polarization effects occur upon the two internal cascade reflections in the prism. Anisotropic and Isotropic types of the polarizer are discussed. The isotropic polarizer is a prism made of a high refractive-index glass coated by multilayer polarization-type dielectric coatings. Efficient s-state polarization is obtained because of p-state leakage upon the two internal cascade reflections. The anisotropic polarizer is made of a birefringent crystal in which angular polarization splitting is obtained by the bireflectance (double-reflection) effect. Fanning of a laser beam into up to eight polarized beams is possible in a prism made of a biaxial crystal. PMID:20820335

  5. A portable direct view configuration prism spectrometer using a double Amici prism

    Sun, Lanjun; Zhang, Yanchao; Tian, Zhaoshuo; Ren, Xiuyun; Fu, Shiyou

    2015-10-01

    In this paper, we present a prism spectrometer that exploits a double Amici prism dispersion structure. The system consists of a slit, a collimating lens, a double Amici prism, an imaging lens and a CCD. The incident light enter into slit, and then is paralleled by a collimating lens to the double Amici prism. The double Amici prism is used to realize spectral dispersion. The dispersed light is collected by an imaging lens and image on the photosensitive surface of the CCD. The dispersion resolution is theoretical analyzed from the ray tracing point of view. In addition, the imaging position on CCD element at different wavelength is presented according to nonlinear curve of dispersion. The designed prism spectrometer can obtain a high light throughput and less optical distortion spectrum in the spectral range of 370-700nm. In experiment, we measured the spectral resolution of the designed prism spectrometer at five wavelength used a grating monochromator. The designed in-line, direct view configuration prism spectrometer owns the advantages of high light throughput, less optical distortions, compact structure, small volume and easy operation, which has important role in application of laser spectral measurement especially laser remote sensing spectral detection.

  6. PRISM Spectrograph Optical Design

    Chipman, Russell A.

    1995-01-01

    The objective of this contract is to explore optical design concepts for the PRISM spectrograph and produce a preliminary optical design. An exciting optical configuration has been developed which will allow both wavelength bands to be imaged onto the same detector array. At present the optical design is only partially complete because PRISM will require a fairly elaborate optical system to meet its specification for throughput (area*solid angle). The most complex part of the design, the spectrograph camera, is complete, providing proof of principle that a feasible design is attainable. This camera requires 3 aspheric mirrors to fit inside the 20x60 cm cross-section package. A complete design with reduced throughput (1/9th) has been prepared. The design documents the optical configuration concept. A suitable dispersing prism material, CdTe, has been identified for the prism spectrograph, after a comparison of many materials.

  7. 76 FR 4283 - Foreign-Trade Zone 153-San Diego, CA; Application for Manufacturing Authority; Abbott...

    2011-01-25

    ...; Abbott Cardiovascular Systems, Inc. (Cardiovascular Device Manufacturing); Riverside County, CA An.... (Abbott), located in Riverside County, California. The application was submitted pursuant to the... sourced from abroad (representing 5% of the value of the finished product) include: resins, plastic...

  8. Acoustic dispersive prism

    Hussein Esfahlani; Sami Karkar; Herve Lissek; Mosig, Juan R.

    2016-01-01

    The optical dispersive prism is a well-studied element, which allows separating white light into its constituent spectral colors, and stands in nature as water droplets. In analogy to this definition, the acoustic dispersive prism should be an acoustic device with capability of splitting a broadband acoustic wave into its constituent Fourier components. However, due to the acoustical nature of materials as well as the design and fabrication difficulties, there is neither any natural acoustic ...

  9. A neutron prism

    A neutron detector with an energy and time resolution makes it possible to realize a new type of a scattering instrument. Such kind of detector can be developed by combining the neutron refractive device (neutron prism) and position-sensitive-detector (PSD) with a time resolution. As the neutron refractive device, two candidates are considered; a compound refractive device and magnetic field gradient. In former case, suitable choice of material and design of the refractive device overcomes a problem of neutron absorption and weak refraction due to material. On the other hand, the magnetic field gradient has an advantage that it has a large refraction and zero neutron absorption comparing with the compound refractive device. A refractive device has been developed with suitable material and design for neutron optics and a quadrupole magnet with permanent magnets in which a constant field gradient is realized. In this paper, the construction and performance of the energy and time resoluble detectors using the neutron refractive devices are described and their application to a neutron scattering experiment is discussed. (author)

  10. Evaluation of the Abbott LCx Mycobacterium tuberculosis Assay for Direct Detection of Mycobacterium tuberculosis Complex in Human Samples

    Garrino, M. G.; Glupczynski, Gerald; Degraux, J; Nizet, H; Delmée, Michel

    1999-01-01

    Seven hundred thirty-seven clinical samples from 460 patients were processed for direct detection of Mycobacterium tuberculosis complex by a semiautomated ligase chain reaction commercial assay, the LCx Mycobacterium tuberculosis Assay (LCx assay) from Abbott Laboratories. Results were compared to those of direct microscopy and standard microbiological culture. Of 26 patients (5.7%) with a culture positive for M. tuberculosis, 22 (84.6%) were found positive by the LCx assay. The sensitivity o...

  11. 77 FR 75610 - Foreign-Trade Zone 22-Chicago, IL, Notification of Proposed Production Activity, Abbott...

    2012-12-21

    ..., Abbott Laboratories, Inc., AbbVie, Inc. (Pharmaceutical Production), North Chicago, IL, Area Abbott Laboratories, Inc. (Abbott) and AbbVie, Inc. (AbbVie) submitted a notification for expanded production... (Board Order 611, 12/ 14/1991, 57 FR 61045, 12/14/1992) and authority was later expanded in 1999 and...

  12. 78 FR 54487 - Abbott Laboratories; Diagnostic-Hematology; Including On-Site Leased Workers From Manpower...

    2013-09-04

    ... Employment and Training Administration Abbott Laboratories; Diagnostic--Hematology; Including On-Site Leased... on-site at the Santa Clara, California location of Abbott Laboratories, Diagnostic--Hematology... International, reporting to Abbott Laboratories, Diagnostic--Hematology division, including on-site...

  13. The Instructional Guide for Abbott Skills Enhancement Classes. Revised Edition.

    Ballinger, Ronda; Gee, Mary Kay

    This guide, which integrates adult basic education (ABE) curriculum, job skills for Abbott Laboratories, and work-related foundation skills, is designed for an instructional program in the skill areas of reading, writing, oral communications, mathematics, and problem solving. In addition to creating a uniform process and product to promote…

  14. Geometric formula for prism deflection

    Apoorva G Wagh; Veer Chand Rakhecha

    2004-08-01

    While studying neutron deflections produced by a magnetic prism, we have stumbled upon a simple `geometric' formula. For a prism of refractive index close to unity, the deflection simply equals the product of the refractive power − 1 and the base-to-height ratio of the prism, regardless of the apex angle. The base and height of the prism are measured respectively along and perpendicular to the direction of beam propagation within the prism. The geometric formula greatly simplifies the optimisation of prism parameters to suit any specific experiment.

  15. PRISM project optical instrument

    Taylor, Charles R.

    1994-01-01

    The scientific goal of the Passively-cooled Reconnaissance of the InterStellar Medium (PRISM) project is to map the emission of molecular hydrogen at 17.035 micrometers and 28.221 micrometers. Since the atmosphere is opaque at these infrared wavelengths, an orbiting telescope is being studied. The availability of infrared focal plane arrays enables infrared imaging spectroscopy at the molecular hydrogen wavelengths. The array proposed for PRISM is 128 pixels square, with a pixel size of 75 micrometers. In order to map the sky in a period of six months, and to resolve the nearer molecular clouds, each pixel must cover 0.5 arcminutes. This sets the focal length at 51.6 cm. In order for the pixel size to be half the diameter of the central diffraction peak at 28 micrometers would require a telescope aperture of 24 cm; an aperture of 60 cm has been selected for the PRISM study for greater light gathering power.

  16. Prism vergence measurements following adaptation to a base out prism

    Tuff, L.C.; Firth, A Y; Griffiths, H.J.

    2000-01-01

    This study examines the effect of adaptation on the prism vergence range following an induced deviation. Five young adult subjects, with normal binocular functions, underwent fusional verfence testing to base in prisms before and after wearing a 10(Δ) base out Fresnel prism. The Fresnel prism was worn for a period of 2, 5, or 10 min on each of three separate occasions. The base in fusional vergence showed no statistical difference before or after adaptation, for any of the time periods. Also ...

  17. 77 FR 16039 - Abbott Laboratories et al.; Withdrawal of Approval of 35 New Drug Applications and 64 Abbreviated...

    2012-03-19

    ... HUMAN SERVICES Food and Drug Administration Abbott Laboratories et al.; Withdrawal of Approval of 35 New... Application No. Drug Applicant NDA 005545 Dicumarol Tablets... Abbott Laboratories, PA77/Bldg. AP30-1E, 200...)) Injection Preservative Free. NDA 010021 Placidyl Abbott Laboratories, (ethchlorvynol) 200 Abbott...

  18. Ultra-dispersive adaptive prism

    Sautenkov, Vladimir A.; Li, Hebin; Rostovtsev, Yuri V.; Scully, Marlan O.

    2007-01-01

    We have experimentally demonstrated an ultra-dispersive optical prism made from coherently driven Rb atomic vapor. The prism possesses spectral angular dispersion that is six orders of magnitude higher than that of a prism made of optical glass; it is the highest spectral angular dispersion that has ever been shown (such angular dispersion allows one to spatially resolve light beams with different frequencies separated by a few kHz). The prism operates near the resonant frequency of atomic va...

  19. Dove prism heterodyne refractometer

    Hsu, Cheng-Chih; Lee, Chia-Yun; Chu, Kuan-Ho; Wu, Tsai-Chen

    2015-10-01

    In this study, we proposed an alternative method, integrating a Dove prism and precision circular heterodyne interferometry, for measuring the refractive index and concentration of sodium chloride and hydrogen peroxide solutions with low phase error. Due to the optical properties of the Dove prism, the test light undergoes total internal reflection (TIR) at the interface between the test sample and the prism. The light beam travels in and out of the Dove prism while maintaining the same direction. Therefore, only slight alignment is required, leading to only small errors in the phase and refractive index. In this study, the phase error, refractive index error, and resolution of the concentration are approximated to be 0.003°, 2×10-5, and 1×10-3 M, respectively. The proposed method has the advantages of a simple optical configuration, ease of operation, little alignment required, and high stability, and it allows for high-precision measurement of the refractive index and concentration of the liquid sample.

  20. Prism Adaptation in Schizophrenia

    Bigelow, Nirav O.; Turner, Beth M.; Andreasen, Nancy C.; Paulsen, Jane S.; O'Leary, Daniel S.; Ho, Beng-Choon

    2006-01-01

    The prism adaptation test examines procedural learning (PL) in which performance facilitation occurs with practice on tasks without the need for conscious awareness. Dynamic interactions between frontostriatal cortices, basal ganglia, and the cerebellum have been shown to play key roles in PL. Disruptions within these neural networks have also…

  1. Generalization of Prism Adaptation

    Redding, Gordon M.; Wallace, Benjamin

    2006-01-01

    Prism exposure produces 2 kinds of adaptive response. Recalibration is ordinary strategic remapping of spatially coded movement commands to rapidly reduce performance error. Realignment is the extraordinary process of transforming spatial maps to bring the origins of coordinate systems into correspondence. Realignment occurs when spatial…

  2. Acoustic dispersive prism

    Esfahlani, Hussein; Karkar, Sami; Lissek, Herve; Mosig, Juan R.

    2016-01-01

    The optical dispersive prism is a well-studied element, which allows separating white light into its constituent spectral colors, and stands in nature as water droplets. In analogy to this definition, the acoustic dispersive prism should be an acoustic device with capability of splitting a broadband acoustic wave into its constituent Fourier components. However, due to the acoustical nature of materials as well as the design and fabrication difficulties, there is neither any natural acoustic counterpart of the optical prism, nor any artificial design reported so far exhibiting an equivalent acoustic behaviour. Here, based on exotic properties of the acoustic transmission-line metamaterials and exploiting unique physical behaviour of acoustic leaky-wave radiation, we report the first acoustic dispersive prism, effective within the audible frequency range 800 Hz-1300 Hz. The dispersive nature, and consequently the frequency-dependent refractive index of the metamaterial are exploited to split the sound waves towards different and frequency-dependent directions. Meanwhile, the leaky-wave nature of the structure facilitates the sound wave radiation into the ambient medium.

  3. Reflection by Porro Prisms

    Greenslade, Thomas B.

    2010-04-01

    Students all know that reflection from a plane mirror produces an image that is reversed right to left and so cannot be read by anyone but Leonardo da Vinci, who kept his notes in mirror writing. A useful counter-example is the Porro prism, which produces an image that is not reversed.

  4. Avoidance of generic competition by Abbott Laboratories' fenofibrate franchise.

    Downing, Nicholas S; Ross, Joseph S; Jackevicius, Cynthia A; Krumholz, Harlan M

    2012-05-14

    The ongoing debate concerning the efficacy of fenofibrate has overshadowed an important aspect of the drug's history: Abbott Laboratories, the maker of branded fenofibrate, has produced several bioequivalent reformulations that dominate the market, although generic fenofibrate has been available for almost a decade. This continued use of branded formulations, which cost twice as much as generic versions of fenofibrate, imposes an annual cost of approximately $700 million on the US health care system. Abbott Laboratories maintained its dominance of the fenofibrate market in part through a complex switching strategy involving the sequential launch of branded reformulations that had not been shown to be superior to the first-generation product and patent litigation that delayed the approval of generic formulations. The small differences in dose of the newer branded formulations prevented their substitution with generics of older-generation products. As soon as direct generic competition seemed likely at the new dose level, where substitution would be allowed, Abbott would launch another reformulation, and the cycle would repeat. Based on the fenofibrate example, our objective is to describe how current policy can allow pharmaceutical companies to maintain market share using reformulations of branded medications, without demonstrating the superiority of next-generation products. PMID:22493409

  5. A displacement-doubling prism

    A novel prism has been devised which can be used in place of the ‘flag’ in an optical shadow-sensing type of displacement sensor, for example. In this way, theoretically the displacement sensitivity of the sensor can be doubled. Such a prism has been manufactured, and its displacement-doubling property has been verified. - Highlights: • A new type of glass prism doubles linear displacement of optical beams. • Optical operation has been verified. • Light beams enter and exit at normal incidence to prism's windows. • Optical path length through prism remains constant, as prism is moved. • Designed to double the displacement sensitivity of knife-edge shadow sensors

  6. 78 FR 23220 - Foreign-Trade Zone 22-Chicago, Illinois, Authorization of Production Activity, Abbott...

    2013-04-18

    ..., Abbott Laboratories, Inc., AbbVie, Inc. (Pharmaceutical Production), North Chicago, Illinois, Area On December 14, 2012, Abbott Laboratories, Inc., and AbbVie, Inc., submitted a notification for expanded... FTZ Board (15 CFR part 400), including notice in the Federal Register inviting public comment (77...

  7. Multibeam collimator uses prism stack

    Minott, P. O.

    1981-01-01

    Optical instrument creates many divergent light beams for surveying and machine element alignment applications. Angles and refractive indices of stack of prisms are selected to divert incoming laser beam by small increments, different for each prism. Angles of emerging beams thus differ by small, precisely-controlled amounts. Instrument is nearly immune to vibration, changes in gravitational force, temperature variations, and mechanical distortion.

  8. Optical design of prism-grating-prism imaging spectrometers

    Zhu, Shanbing; Tang, Minxue; Ji, Yiqun; Gong, Guangbiao; Zhang, Ruirui; Shen, Weimin

    2008-12-01

    Imaging spectrometers can provide imagery and spectrum information of objects and form so-called three-dimensional spectral imagery, two spatial and one spectral dimension. Most of imaging spectrometers use conventional spectroscopic elements or systems, such as reflective diffraction gratings, prisms, filters, spatial modulated interferometers, and so on. Here a special imaging spectrometer which is based on a novel cemented Prism-Grating-Prism (PGP) is reported. Its spectroscopic element PGP consists of two prisms and a holographic transmission volume grating, which is cemented between these prisms. The two prisms mainly function as beam deviation, the grating as a disperser. In addition to the high light efficiency of the volume gratings that is required for high spectral resolution, the cementing difficulty when surface relief gratings are used can be avoided due to its voluminal characteristic. The PGP imaging spectrometer has advantages of direct vision, dispersion uniform, compactness, low cost, and facility to be used. The principle, structure, and optimized design of the PGP imaging spectrometer are given in detail. Its front collimation optics and rear focusing lenses are same so as to reduce its cost further. The spectral coverage, resolution, and track length of the designed system are respectively visible light from 400nm to 800nm, 1.6nm/pixel, and 85mm. From its performance evaluation, it is shown that the PGP imaging spectrometer has the potentiality to be used in microscopic hyperspectral imagers and hyperspectral imaging remote sensors.

  9. 21 CFR 886.1660 - Gonioscopic prism.

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Gonioscopic prism. 886.1660 Section 886.1660 Food... DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1660 Gonioscopic prism. (a) Identification. A gonioscopic prism is a device that is a prism intended to be placed on the eye to study the anterior...

  10. Evaluations of 1990 PRISM design revisions

    Analyses of the 1990 version of the PRISM Advanced Liquid Metal Reactor (ALMR) design are presented and discussed. Most of the calculations were performed using BNL computer codes, particularly SSC and MINET. In many cases, independent BNL calculations were compared against analyses presented by General Electric when they submitted the PRISM design revisions for evaluation by the Nuclear Regulatory Commission (NRC). The current PRISM design utilizes the metallic fuel developed by Argonne National Laboratory (ANL) which facilitates the passive/''inherent'' shutdown mechanism that acts to shut down reactor power production whenever the system overheats. There are a few vulnerabilities in the passive shutdown, with the most worrisome being the positive feedback from sodium density decreases or sodium voiding. Various postulated unscrammed events were examined by GE and/or BNL, and much of the analysis discussed in this report is focused on this category of events. For the most part, the BNL evaluations confirm the information submitted by General Electric. The principal areas of concern are related to the performance of the ternary metal fuel, and may be resolved as ANL continues with its fuel development and testing program

  11. Evaluations of 1990 PRISM design revisions

    Van Tuyle, G.J.; Slovik, G.C.; Chan, B.C.; Aronson, A.L.; Kennett, R.J. [Brookhaven National Lab., Upton, NY (United States)

    1992-03-01

    Analyses of the 1990 version of the PRISM Advanced Liquid Metal Reactor (ALMR) design are presented and discussed. Most of the calculations were performed using BNL computer codes, particularly SSC and MINET. In many cases, independent BNL calculations were compared against analyses presented by General Electric when they submitted the PRISM design revisions for evaluation by the Nuclear Regulatory Commission (NRC). The current PRISM design utilizes the metallic fuel developed by Argonne National Laboratory (ANL) which facilitates the passive/``inherent`` shutdown mechanism that acts to shut down reactor power production whenever the system overheats. There are a few vulnerabilities in the passive shutdown, with the most worrisome being the positive feedback from sodium density decreases or sodium voiding. Various postulated unscrammed events were examined by GE and/or BNL, and much of the analysis discussed in this report is focused on this category of events. For the most part, the BNL evaluations confirm the information submitted by General Electric. The principal areas of concern are related to the performance of the ternary metal fuel, and may be resolved as ANL continues with its fuel development and testing program.

  12. Detection of respiratory syncytial virus antigen in nasal washings by Abbott TestPack enzyme immunoassay.

    Wren, C G; Bate, B J; Masters, H B; Lauer, B A

    1990-01-01

    We compared the new Abbott TestPack (TP) respiratory syncytial virus (RSV) enzyme immunoassay (EIA) with cell culture and two commercial RSV EIAs (from Abbott Diagnostics and Kallestad Laboratories) by using split samples of fresh nasal washings from children with suspected RSV disease. Two tubes of HEp-2 cells were inoculated and observed for cytopathic effect for 14 days, and isolates were confirmed by immunofluorescence. The TP EIA was performed by following the manufacturer's instructions...

  13. Study of dose calculation on breast brachytherapy using prism TPS

    PRISM is one of non-commercial Treatment Planning System (TPS) and is developed at the University of Washington. In Indonesia, many cancer hospitals use expensive commercial TPS. This study aims to investigate Prism TPS which been applied to the dose distribution of brachytherapy by taking into account the effect of source position and inhomogeneities. The results will be applicable for clinical Treatment Planning System. Dose calculation has been implemented for water phantom and CT scan images of breast cancer using point source and line source. This study used point source and line source and divided into two cases. On the first case, Ir-192 seed source is located at the center of treatment volume. On the second case, the source position is gradually changed. The dose calculation of every case performed on a homogeneous and inhomogeneous phantom with dimension 20 × 20 × 20 cm3. The inhomogeneous phantom has inhomogeneities volume 2 × 2 × 2 cm3. The results of dose calculations using PRISM TPS were compared to literature data. From the calculation of PRISM TPS, dose rates show good agreement with Plato TPS and other study as published by Ramdhani. No deviations greater than ±4% for all case. Dose calculation in inhomogeneous and homogenous cases show similar result. This results indicate that Prism TPS is good in dose calculation of brachytherapy but not sensitive for inhomogeneities. Thus, the dose calculation parameters developed in this study were found to be applicable for clinical treatment planning of brachytherapy

  14. Study of dose calculation on breast brachytherapy using prism TPS

    Fendriani, Yoza; Haryanto, Freddy

    2015-09-01

    PRISM is one of non-commercial Treatment Planning System (TPS) and is developed at the University of Washington. In Indonesia, many cancer hospitals use expensive commercial TPS. This study aims to investigate Prism TPS which been applied to the dose distribution of brachytherapy by taking into account the effect of source position and inhomogeneities. The results will be applicable for clinical Treatment Planning System. Dose calculation has been implemented for water phantom and CT scan images of breast cancer using point source and line source. This study used point source and line source and divided into two cases. On the first case, Ir-192 seed source is located at the center of treatment volume. On the second case, the source position is gradually changed. The dose calculation of every case performed on a homogeneous and inhomogeneous phantom with dimension 20 × 20 × 20 cm3. The inhomogeneous phantom has inhomogeneities volume 2 × 2 × 2 cm3. The results of dose calculations using PRISM TPS were compared to literature data. From the calculation of PRISM TPS, dose rates show good agreement with Plato TPS and other study as published by Ramdhani. No deviations greater than ±4% for all case. Dose calculation in inhomogeneous and homogenous cases show similar result. This results indicate that Prism TPS is good in dose calculation of brachytherapy but not sensitive for inhomogeneities. Thus, the dose calculation parameters developed in this study were found to be applicable for clinical treatment planning of brachytherapy.

  15. Evaluation of the Abbott LCx Assay for Detection of Neisseria gonorrhoeae in Endocervical Swab Specimens from Females

    Kehl, Sue C.; Georgakas, Kristina; Swain, Geoffrey R.; Sedmak, Gerald; Gradus, Stephen; Singh, Ajaib; Foldy, Seth

    1998-01-01

    The Abbott LCx Neisseria gonorrhoeae assay (Abbott Laboratories, Abbott Park, Ill.) uses a ligase chain reaction (LCR) amplification in the LCx probe system for detection of a specific nucleotide sequence in the Opa-encoding gene of N. gonorrhoeae. We evaluated the LCx assay in a comparison with conventional culture employing modified Thayer-Martin media for the detection of N. gonorrhoeae from female endocervical specimens obtained from patients attending a sexually transmitted disease clini...

  16. Rotatable prism for pan and tilt

    Ball, W. B.

    1980-01-01

    Compact, inexpensive, motor-driven prisms change field of view of TV camera. Camera and prism rotate about lens axis to produce pan effect. Rotating prism around axis parallel to lens produces tilt. Size of drive unit and required clearance are little more than size of camera.

  17. Preserving with Prisms: Producing Nets

    Prummer, Kathy E.; Amador, Julie M.; Wallin, Abraham J.

    2016-01-01

    Two mathematics teachers in a small rural school decided to create a task that would engage seventh graders. The goal of the real-world activity was to help students develop geometric and spatial reasoning and to support their understanding of volume of rectangular prisms. The impetus for the task came from the teachers' desire to engage students…

  18. Prism-based single-camera system for stereo display

    Zhao, Yue; Cui, Xiaoyu; Wang, Zhiguo; Chen, Hongsheng; Fan, Heyu; Wu, Teresa

    2016-06-01

    This paper combines the prism and single camera and puts forward a method of stereo imaging with low cost. First of all, according to the principle of geometrical optics, we can deduce the relationship between the prism single-camera system and dual-camera system, and according to the principle of binocular vision we can deduce the relationship between binoculars and dual camera. Thus we can establish the relationship between the prism single-camera system and binoculars and get the positional relation of prism, camera, and object with the best effect of stereo display. Finally, using the active shutter stereo glasses of NVIDIA Company, we can realize the three-dimensional (3-D) display of the object. The experimental results show that the proposed approach can make use of the prism single-camera system to simulate the various observation manners of eyes. The stereo imaging system, which is designed by the method proposed by this paper, can restore the 3-D shape of the object being photographed factually.

  19. A Liquid Prism for Refractive Index Studies

    Edmiston, Michael D.

    2001-11-01

    A hollow glass prism filled with liquid becomes a "liquid prism". A simple method for constructing hollow glass prisms is presented. A method is given for a demonstration that uses the liquid prism with a laser or laser pointer so the audience can observe differences in refractive index for various liquids. The demonstration provides a quick and easy determination of the sugar content of soft drinks and juices. The prism makes it easy to determine a numerical value for the refractive index of a liquid.

  20. Evaluation of the Abbott Real Time HCV genotype II assay for Hepatitis C virus genotyping

    Sariguzel, Fatma Mutlu; Berk, Elife; Gokahmetoglu, Selma; Ercal, Baris Derya; Celik, Ilhami

    2015-01-01

    Objective: The determination of HCV genotypes and subtypes is very important for the selection of antiviral therapy and epidemiological studies. The aim of this study was to evaluate the performance of Abbott Real Time HCV Genotype II assay in HCV genotyping of HCV infected patients in Kayseri, Turkey. Methods: One hundred patients with chronic hepatitis C admitted to our hospital were evaluated between June 2012 and December 2012, HCV RNA levels were determined by the COBAS® AmpliPrep/COBAS® TaqMan® 48 HCV test. HCV genotyping was investigated by the Abbott Real Time HCV Genotype II assay. With the exception of genotype 1, subtypes of HCV genotypes could not be determined by Abbott assay. Sequencing analysis was used as the reference method. Results: Genotypes 1, 2, 3 and 4 were observed in 70, 4, 2 and 24 of the 100 patients, respectively, by two methods. The concordance between the two systems to determine HCV major genotypes was 100%. Of 70 patients with genotype 1, 66 showed infection with subtype 1b and 4 with subtype 1a by Abbott Real Time HCV Genotype II assay. Using sequence analysis, 61 showed infection with subtype 1b and 9 with subtype 1a. In determining of HCV genotype 1 subtypes, the difference between the two methods was not statistically significant (P>0.05). HCV genotype 4 and 3 samples were found to be subtype 4d and 3a, respectively, by sequence analysis. There were four patients with genotype 2. Sequence analysis revealed that two of these patients had type 2a and the other two had type 2b. Conclusion: The Abbott Real Time HCV Genotype II assay yielded results consistent with sequence analysis. However, further optimization of the Abbott Real Time HCV Genotype II assay for subtype identification of HCV is required. PMID:26649001

  1. A multicenter evaluation of the Abbott RealTime HCV genotype II assay

    Marco Ciotti

    2009-12-01

    Full Text Available Viral genotype is an important determinant of the therapeutical outcome of the chronic hepatitis C and is useful in clinical practice to determine the duration of treatment1.While the viral type shows a clear association with therapeutic success, there is currently no evidence to that effect for HCV subtype, whose value is thus confined to epidemiological studies.The Abbott RealTime HCV Genotype II assay, through the use of Minor Groove Binder probes (MGB is able to distinguish genotypes 1 to 6 (target 5’-UTR region and subtypes 1a and 1b (NS5B region. In four different Italian centers a comparison between the Abbott RealTime HCV Genotype II assay and the Versant HCV Genotype 2.0 (LIPA has been performed.A total of 143 non selected samples with the request of HCV genotyping have been analysed. 141/143 samples (98.6% have provided reportable results with both tests (2 indeterminates with LIPA. Concordance at the type level was 96.5% (136/141. Considering the 136 concordant samples, the distribution was as follows: type 1 = 61 (44.9%, 2 = 36 (26.5%, 3 = 21 (15.4%, 4 = 17 (12.5% 5 = 1 (0.7%. Both assays assigned subtype in 56/61 (91.8% samples of genotype 1 (3 and 2 samples only provided the type for LIPA and Abbott, respectively and 50/56 (89.3% had concordant subtype. It is worth to note that 4 of the 5 samples with discordant subtype Abbott 1a/LiPA 1b came from the only center that used for LIPA the 5-UTR amplicon, loosing the benefit of the core region which has been introduced in the version 2 of the test to improve the accuracy in distinguishing between 1a and 1b.There was only one discordant sample at type level (Abbott 4, LIPA 1b which after sequencing and phylogenetic analysis was resolved as type 4. Four mixed infections were detected, 3 with the Abbott test (two 1a+4 and one 1b+3 and 1 with the LIPA test (1a+3. In all cases the comparison test showed a single genotype 1 infection. The new Abbott RealTime HCV Genotype II assay showed a

  2. An Evaluation of the Main Performance of the Abbott Axsym System%美国Abbott Axsym免疫分析仪性能初步评价

    王红旗; 金晶; 成军; 孙长贵; 孙关忠

    2003-01-01

    目的对Abbott Axsym免疫分析仪性能进行评价.方法通过检测HBsAg,对Abbott Axsym免疫分析仪的灵敏度、特异性、正确检测率(可检测性)、重复性、线性及与ELISA检测HBsAg的相关性等指标进行测定.结果Abbott Axsym免疫分析仪的灵敏度达到0.16 μg/L,特异性为100%,正确检测率(可检测性)为99.72%,不同参比血清的总CV值在5.4%~9.4%之间波动,在0.1~100μg/L范围内线性良好(r=0.994 9),与ELISA比较,两法的符合率为97%,结论该仪器设计科学合理,检测快速方便,结果准确可靠,是大、中型医院临床实验室比较理想的免疫分析仪之一.

  3. Early Childhood Education: The Sustainability of the Benefits of Preschool Participation in Abbott Districts

    Fernandez, Norma

    2010-01-01

    The landmark New Jersey Supreme Court school funding case, "Abbott v. Burke", established the availability of preschool for all three- and four-year-olds living within the state's thirty-one poorest districts as a means of eradicating the effects of poverty. Longitudinal studies have shown the value of high quality preschool programs for improving…

  4. 75 FR 340 - Approval for Expansion of Subzone 22F, Abbott Molecular, Inc. (Pharmaceutical and Molecular...

    2010-01-05

    ...- 17-09); Whereas, notice inviting public comment has been given in the Federal Register (74 FR 8052... Foreign-Trade Zones Board Approval for Expansion of Subzone 22F, Abbott Molecular, Inc. (Pharmaceutical and Molecular Diagnostic Products), Chicago, IL, Area Pursuant to its authority under the...

  5. Reproducibility Problems with the Abbott Laboratories LCx Assay for Chlamydia trachomatis and Neisseria gonorrhoeae

    Gronowski, Ann M.; Copper, Susan; Baorto, David; Murray, Patrick R.

    2000-01-01

    This study demonstrates that significant reproducibility problems can occur during routine use of the Abbott Laboratories LCx assay for Chlamydia trachomatis and Neisseria gonorrhoeae. These problems can go undetected by the quality control procedures outlined in the manufacturer's package insert. We outline here procedures for detecting and preventing contamination and reproducibility problems.

  6. The Labour Process of Teaching at John Abbott College (Part One).

    Johnson, Walter

    This survey was conducted at John Abbott College to gauge teachers' responses to issues concerning their job satisfaction, interaction with colleagues, perceptions of student abilities, and perceptions concerning union negotiating priorities and areas of conflict within the institutional environment. Of the 75 teachers contacted, 47 returned…

  7. Preoperative prism adaptation test in normosensoric strabismus

    Schildwächter-von Langenthal, Annette; Kommerell, Guntram; Klein, Ulrike; Simonsz, Huib

    1989-01-01

    textabstractIn 19 patients with normosensoric esotropia, the squint angles measured with the alternate cover test were compared with those after prolonged prismatic correction of the squint angle and with those after prolonged occlusion of one eye. All patients showed an increase of the squint angle after prism adaptation. The angle was generally smaller after diagnostic occlusion of one eye than after prism adaptation. We assume that the increase in the squint angle after prism adaptation is...

  8. Neutron forward diffraction by single crystal prisms

    Sohrab Abbas; Apoorva G Wagh; Markus Strobl; Wolfgang Treimer

    2008-11-01

    We have derived analytic expressions for the deflection as well as transmitted fraction of monochromatic neutrons forward diffracted by a single crystal prism. In the vicinity of a Bragg reflection, the neutron deflection deviates sharply from that for an amorphous prism, exhibiting three orders of magnitude greater sensitivity to the incidence angle. We have measured the variation of neutron deflection and transmission across a Bragg reflection, for several single crystal prisms. The results agree well with theory.

  9. Dispersion Compensation using a Prism-pair

    Shaked, Yaakov; Yefet, Shai; Pe'er, Avi

    2014-01-01

    A simple and intuitive formulation is reviewed for the Brewster prism-pair - A most common component in spectroscopy-oriented experiments using ultrashort pulses. This review aims to provide students and beginners in the field of spectroscopy with a unified description of a major experimental component. The total spectral phase experienced by a broadband light field is calculated after passing through a pair of Brewster-cut prisms, demonstrating the flexibility of the prism pair to provide tu...

  10. Planar scanning method for detecting refraction characteristics of two-dimensional photonic quasi-crystal wedge-shaped prisms.

    Liu, Jianjun; Tan, Wei; Liu, Exian; Hu, Haili; Fan, Zhigang; Zhang, Tianhua; Zhang, Xiong

    2016-05-01

    In this study, a planar scanning method is proposed. This novel method adapts two monitors moving along double planar tracks that can be used to detect refraction characteristics of two-dimensional (2D) photonic quasi-crystal (PQC) wedge-shaped prisms. Refraction of a decagonal Penrose-type PQC prism is analyzed for a given incident beam and two polarization modes at different incident positions in the prism using this method. Refraction from the prism is irregular, indicating that nonuniformity in the arrangement of scatterers in the prism causes Bragg-like scattering irregularities. Numerical results show that this method can be used for guiding the design of a 2D PQC prism and for the analysis of its refraction characteristics. PMID:27140896

  11. Superconducting magnetic Wollaston prism for neutron spin encoding

    A magnetic Wollaston prism can spatially split a polarized neutron beam into two beams with different neutron spin states, in a manner analogous to an optical Wollaston prism. Such a Wollaston prism can be used to encode the trajectory of neutrons into the Larmor phase associated with their spin degree of freedom. This encoding can be used for neutron phase-contrast radiography and in spin echo scattering angle measurement (SESAME). In this paper, we show that magnetic Wollaston prisms with highly uniform magnetic fields and low Larmor phase aberration can be constructed to preserve neutron polarization using high temperature superconducting (HTS) materials. The Meissner effect of HTS films is used to confine magnetic fields produced electromagnetically by current-carrying HTS tape wound on suitably shaped soft iron pole pieces. The device is cooled to ∼30 K by a closed cycle refrigerator, eliminating the need to replenish liquid cryogens and greatly simplifying operation and maintenance. A HTS film ensures that the magnetic field transition within the prism is sharp, well-defined, and planar due to the Meissner effect. The spin transport efficiency across the device was measured to be ∼98.5% independent of neutron wavelength and energizing current. The position-dependent Larmor phase of neutron spins was measured at the NIST Center for Neutron Research facility and found to agree well with detailed simulations. The phase varies linearly with horizontal position, as required, and the neutron beam shows little depolarization. Consequently, the device has advantages over existing devices with similar functionality and provides the capability for a large neutron beam (20 mm × 30 mm) and an increase in length scales accessible to SESAME to beyond 10 μm. With further improvements of the external coupling guide field in the prototype device, a larger neutron beam could be employed

  12. Study of dose calculation on breast brachytherapy using prism TPS

    Fendriani, Yoza; Haryanto, Freddy [Nuclear Physics and Biophysics Research Division, FMIPA Institut Teknologi Bandung, Physics Buildings, Jl. Ganesha 10, Bandung 40132 (Indonesia)

    2015-09-30

    PRISM is one of non-commercial Treatment Planning System (TPS) and is developed at the University of Washington. In Indonesia, many cancer hospitals use expensive commercial TPS. This study aims to investigate Prism TPS which been applied to the dose distribution of brachytherapy by taking into account the effect of source position and inhomogeneities. The results will be applicable for clinical Treatment Planning System. Dose calculation has been implemented for water phantom and CT scan images of breast cancer using point source and line source. This study used point source and line source and divided into two cases. On the first case, Ir-192 seed source is located at the center of treatment volume. On the second case, the source position is gradually changed. The dose calculation of every case performed on a homogeneous and inhomogeneous phantom with dimension 20 × 20 × 20 cm{sup 3}. The inhomogeneous phantom has inhomogeneities volume 2 × 2 × 2 cm{sup 3}. The results of dose calculations using PRISM TPS were compared to literature data. From the calculation of PRISM TPS, dose rates show good agreement with Plato TPS and other study as published by Ramdhani. No deviations greater than ±4% for all case. Dose calculation in inhomogeneous and homogenous cases show similar result. This results indicate that Prism TPS is good in dose calculation of brachytherapy but not sensitive for inhomogeneities. Thus, the dose calculation parameters developed in this study were found to be applicable for clinical treatment planning of brachytherapy.

  13. Molecular detection and confirmation of Neisseria gonorrhoeae in urogenital and extragenital specimens using the Abbott CT/NG RealTime assay and an in-house assay targeting the porA pseudogene.

    Walsh, A

    2011-04-01

    Culture for detection of Neisseria gonorrhoeae (NG) is being replaced by molecular assays, but difficulties are observed with false positive and negatives results, especially for extragenital samples. This study evaluates the Abbott CT\\/NG Real-Time assay and a real-time porA pseudogene assay. Samples (n = 600) from a mixed prevalence Irish population include 164 male urines with corresponding urethral swabs, 58 endocervical swabs, 173 male pharyngeal swabs, 205 male rectal swabs, 36 NG clinical isolates and 26 commensal Neisseria species isolates. There was a 100% concordance between the Abbott CT\\/NG Real-Time and the porA assay. The positivity rate was 1.2%, 1.7%, 8.1% and 5.8% for FVU\\/urethral swabs, endocervical, pharyngeal and rectal swabs, respectively. These results were compared to culture and discrepancies were found with nine pharyngeal and three rectal swabs. Seven of the 12 discrepant positive samples were sequenced and were confirmed "true positives". The sensitivity and specificity of the molecular assays was 100%. The sensitivity of the culture-based testing was 100% for urogenital samples but 36% and 75% for pharyngeal and rectal swabs, respectively. The combined Abbott CT\\/NG and porA assays provide a valuable alternative to culture and also generate a significant increase in the diagnosis of pharyngeal and rectal NG infection.

  14. The PRISM/PRIME Project

    Lepton Flavour violation is predicted by many theories beyond the standard model. In the muon sector such a violation entails not only direct μ→eγ decay but also the conversion process μ→e. To measure this to high precision requires a large number of muons of very similar energy, and this is difficult to achieve from a muon target with conventional beam optics. PRISM is an FFAG system designed to accept large numbers of muons (1012/sec) with a wide range of energies, and render them monochromatic by accelerating the less energetic muons and decelerating the more energetic ones. To preserve Liouville's theorem, this is accompanied by a broadening in the timing of the muons, hence the name 'Phase Rotated Intense Slow Muon source.' The principles of this device have been demonstrated and components prototyped. PRIME is a detector (PRISM Muon Electron Conversion) which has been designed to stop 20 MeV bunches of muons in a thin foil, giving a very clean signal and reaching a background sensitivity of 10-18, four orders of magnitude better than today's limits and probing the interesting region for BSM theories.

  15. Effect of using heat-inactivated serum with the Abbott human T-cell lymphotropic virus type III antibody test.

    Jungkind, D. L.; DiRenzo, S A; Young, S J

    1986-01-01

    The Abbott enzyme immunoassay (Abbott Laboratories, North Chicago, Ill.) for human T-cell lymphotropic virus type III (HTLV-III) antibody was evaluated to determine the effect of using heat-inactivated (56 degrees C for 30 min) serum as the sample. Each of 58 nonreactive serum samples gave a higher A492 value when tested after heat inactivation. Ten of the samples became reactive after heating. Heat-inactivated serum should not be used in the current Abbott HTLV-III antibody test, because thi...

  16. PRISM: FFAG as a phase rotator

    PRISM is a project in Japan to make a high-intensity low-energy muon source with a narrow energy-spread and high purity. In this report, we present an overview of the PRISM project and its physics applications, especially to a search for muon lepton flavor violation. Its future extension towards a neutrino factory is also mentioned. (author)

  17. The Prism Plastic Calorimeter (PPC)

    2002-01-01

    This proposal supports two goals: \\\\ \\\\ First goal:~~Demonstrate that current, widely used plastic technologies allow to design Prism Plastic Calorimeter~(PPC) towers with a new ``liquid crystal'' type plastic called Vectra. It will be shown that this technique meets the requirements for a LHC calorimeter with warm liquids: safety, hermeticity, hadronic compensation, resolution and time response. \\\\ \\\\ Second goal:~~Describe how one can design a warm liquid calorimeter integrated into a LHC detector and to list the advantages of the PPC: low price, minimum of mechanical structures, minimum of dead space, easiness of mechanical assembly, accessibility to the electronics, possibility to recirculate the liquid. The absorber and the electronic being outside of the liquid and easily accessible, one has maximum flexibility to define them. \\\\ \\\\ The R&D program, we define here aims at showing the feasibility of these new ideas by building nine towers of twenty gaps and exposing them to electron and hadron beams.

  18. Evaluation of the Abbott TESTPACK RSV enzyme immunoassay for detection of respiratory syncytial virus in nasopharyngeal swab specimens.

    Swierkosz, E M; Flanders, R; Melvin, L; Miller, J D; Kline, M W

    1989-01-01

    The Abbott TESTPACK RSV assay (Abbott Laboratories, North Chicago, Ill.), a rapid (20-min) enzyme immunoassay, was compared with culture and direct immunofluorescence (DFA) of nasopharyngeal cells for the detection of respiratory syncytial virus (RSV) in nasopharyngeal swab specimens. Nasopharyngeal swab specimens, collected from 234 infants, were placed in viral transport medium. Portions of specimen in transport medium were used for each test. Of 234 specimens, 70 (30%) were culture positiv...

  19. Abbott Wave-Triggered Runaway in Line-Driven Winds from Stars and Accretion Disks

    Feldmeier, Achim; Shlosman, Isaac

    2001-01-01

    Line-driven winds from stars and accretion disks are accelerated by scattering in numerous line transitions. The wind is believed to adopt a unique critical solution, out of the infinite variety of shallow and steep solutions. We study the inherent dynamics of the transition towards the critical wind. A new runaway wind mechanism is analyzed in terms of radiative-acoustic (Abbott) waves which are responsible for shaping the wind velocity law and fixing the mass loss. Three different flow type...

  20. Revisiting Abbott Thayer: non-scientific reflections about camouflage in art, war and zoology

    Behrens, Roy R.

    2008-01-01

    This paper reviews the achievements of Abbott Handerson Thayer (1849–1921), an American painter and naturalist whose pioneering writings on animal camouflage addressed shared concerns among artists, zoologists and military tacticians. It discusses his beliefs about camouflage (both natural and military) in the context of his training as an artist, with particular emphasis on three of his major ideas: countershading, ruptive (or disruptive) coloration and background picturing.

  1. Automation of the Limulus amoebocyte lysate test by using the Abbott MS-2 microbiology system.

    Jorgensen, J H; Alexander, G A

    1981-01-01

    A rapid, automated method for the performance of the Limulus amoebocyte lysate endotoxin assay has been developed by using the Abbott MS-2 Microbiology System. This instrument automatically determines sequential changes in the optical density of up to 176 samples at 1- or 5-min increments during a 1-h assay period. Graphic representation of optical density changes can be viewed on a cathode-ray tube or reproduced by using a hard-copy printer. Limulus amoebocyte lysate preparations that were o...

  2. PRISM: a planned risk information seeking model.

    Kahlor, LeeAnn

    2010-06-01

    Recent attention on health-related information seeking has focused primarily on information seeking within specific health and health risk contexts. This study attempts to shift some of that focus to individual-level variables that may impact health risk information seeking across contexts. To locate these variables, the researcher posits an integrated model, the Planned Risk Information Seeking Model (PRISM). The model, which treats risk information seeking as a deliberate (planned) behavior, maps variables found in the Theory of Planned Behavior (TPB; Ajzen, 1991) and the Risk Information Seeking and Processing Model (RISP; Griffin, Dunwoody, & Neuwirth, 1999), and posits linkages among those variables. This effort is further informed by Kahlor's (2007) Augmented RISP, the Theory of Motivated Information Management (Afifi & Weiner, 2004), the Comprehensive Model of Information Seeking (Johnson & Meischke, 1993), the Health Information Acquisition Model (Freimuth, Stein, & Kean, 1989), and the Extended Parallel Processing Model (Witte, 1998). The resulting integrated model accounted for 59% of the variance in health risk information-seeking intent and performed better than the TPB or the RISP alone. PMID:20512716

  3. Demagnetizing effects in stacked rectangular prisms

    Christensen, Dennis; Nielsen, Kaspar Kirstein; Bahl, Christian Robert Haffenden;

    2011-01-01

    configuration, temperature distribution and applied magnetic field. In this paper the model is applied to the case of a stack of parallel, ferromagnetic rectangular prisms and the resulting internal field is found as a function of the orientation of the applied field, the number of prisms in the stack, the...... spacing between the prisms and the packing density of the stack. The results show that the resulting internal field is far from being equal to the applied field and that the various stack configurations investigated affect the resulting internal field significantly and non-linearly. The results have a...

  4. CHR(PRISM)-based probabilistic logic learning

    Sneyers, Jon; Meert, Wannes; Vennekens, Joost; Kameya, Yoshitaka; Sato, Taisuke

    2010-01-01

    PRISM is an extension of Prolog with probabilistic predicates and built-in support for expectation-maximization learning. Constraint Handling Rules (CHR) is a high-level programming language based on multi-headed multiset rewrite rules. In this paper, we introduce a new probabilistic logic formalism, called CHRiSM, based on a combination of CHR and PRISM. It can be used for high-level rapid prototyping of complex statistical models by means of "chance rules". The underlying PRISM system can t...

  5. A prism carbon molecule C$_20$

    OHNO, Koichi; Satoh, Hiroko; Iwamoto, Takeaki

    2015-01-01

    A new carbon family with a prism structure has been found by quantum chemical calculations. The prism-$C_20$ has a $D_10h$ structure with double-layered decagonal rings connected each other by ten vertical CC bonds. The CC bond lengths are 0.144 nm on the decagonal rings and 0.148 nm on the side faces. The diameter of the ring is 0.465 nm. The $prism-C_20$ is expected to be stable, since the lowest energy barrier from it was estimated to be 158.0 kJ mol$^−1$.

  6. Highly dispersive photonic band-gap prism

    We propose the concept of a photonic band-gap (PBG) prism based on two-dimensional PBG structures and realize it in the millimeter-wave spectral regime. We recognize the highly nonlinear dispersion of PBG materials near Brillouin zone edges and utilize the dispersion to achieve strong prism action. Such a PBG prism is very compact if operated in the optical regime, ∼20μm in size for λ∼700nm, and can serve as a dispersive element for building ultracompact miniature spectrometers. copyright 1996 Optical Society of America

  7. Highly dispersive photonic band-gap prism.

    Lin, S Y; Hietala, V M; Wang, L; Jones, E D

    1996-11-01

    We propose the concept of a photonic band-gap (PBG) prism based on two-dimensional PBG structures and realize it in the millimeter-wave spectral regime. We recognize the highly nonlinear dispersion of PBG materials near Brillouin zone edges and utilize the dispersion to achieve strong prism action. Such a PBG prism is very compact if operated in the optical regime, ~20 mm in size for lambda ~ 700 nm, and can serve as a dispersive element for building ultracompact miniature spectrometers. PMID:19881796

  8. 21 CFR 886.1650 - Ophthalmic bar prism.

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic bar prism. 886.1650 Section 886.1650...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1650 Ophthalmic bar prism. (a) Identification. An ophthalmic bar prism is a device that is a bar composed of fused prisms of gradually...

  9. Stabilization of a self-referenced, prism-based, Cr:forsterite laser frequency comb using an intracavity prism

    The frequency comb from a prism-based Cr:forsterite laser has been frequency stabilized using intracavity prism insertion and pump power modulation. Absolute frequency measurements of a CW fiber laser stabilized to the P(13) transition of acetylene demonstrate a fractional instability of ∼2x10-11 at a 1 s gate time, limited by a commercial Global Positioning System (GPS)-disciplined rubidium oscillator. Additionally, absolute frequency measurements made simultaneously using a second frequency comb indicate relative instabilities of 3x10-12 for both combs for a 1 s gate time. Estimations of the carrier-envelope offset frequency linewidth based on relative intensity noise and the response dynamics of the carrier-envelope offset to pump power changes confirm the observed linewidths.

  10. Portable Remote Imaging Spectrometer (PRISM) Project

    National Aeronautics and Space Administration — Develop an UV-NIR (350nm to 1050 nm) portable remote imaging spectrometer (PRISM) for flight on a variety of airborne platforms with high SNR and response...

  11. Random prism: an alternative to random forests

    Stahl, F.; Bramer, Max

    2012-01-01

    Ensemble learning techniques generate multiple classifiers, so called base classifiers, whose combined classification results are used in order to increase the overall classification accuracy. In most ensemble classifiers the base classifiers are based on the Top Down Induction of Decision Trees (TDIDT) approach. However, an alternative approach for the induction of rule based classifiers is the Prism family of algorithms. Prism algorithms produce modular classification rules that do not nece...

  12. Pillars and pinning centers in superconducting prisms

    We solve the Ginzburg-Landau equations for to study the vortex configurations in a superconducting prism with a square array of pillars or holes in the presence of a uniform applied magnetic field. The presence of the pillars (holes) changes the vortex structures in the superconducting prism considerably. We calculate magnetization, free energy and vorticity curves, which shows the transition between different vortex configurations as a function of magnetic fields

  13. Recent studies on the PRISM FFAG ring

    Next generation lepton flavour violation experiments require high intensity and high quality muon beams. The PRISM Task Force focuses on accelerator R and D for realizing such beams using an FFAG ring. The scaling and non-scaling designs for the PRISM FFAG ring are discussed. The recent studies on injection/extraction systems and matching to the solenoid channel are outlined. The future plans for the study are presented.

  14. OPERA: Objective Prism Enhanced Reduction Algorithms

    Universidad Complutense de Madrid Astrophysics Research Group

    2015-09-01

    OPERA (Objective Prism Enhanced Reduction Algorithms) automatically analyzes astronomical images using the objective-prism (OP) technique to register thousands of low resolution spectra in large areas. It detects objects in an image, extracts one-dimensional spectra, and identifies the emission line feature. The main advantages of this method are: 1) to avoid subjectivity inherent to visual inspection used in past studies; and 2) the ability to obtain physical parameters without follow-up spectroscopy.

  15. Demagnetizing effects in stacked rectangular prisms

    A numerical, magnetostatic model of the internal magnetic field of a rectangular prism is extended to the case of a stack of rectangular prisms. The model enables the calculation of the spatially resolved, three-dimensional internal field in such a stack given any magnetic state function, stack configuration, temperature distribution and applied magnetic field. In this paper the model is applied to the case of a stack of parallel, ferromagnetic rectangular prisms and the resulting internal field is found as a function of the orientation of the applied field, the number of prisms in the stack, the spacing between the prisms and the packing density of the stack. The results show that the resulting internal field is far from being equal to the applied field and that the various stack configurations investigated affect the resulting internal field significantly and non-linearly. The results have a direct impact on the design of, e.g., active magnetic regenerators made of stacked rectangular prisms in terms of optimizing the internal field.

  16. Neutron energy analysis by silicon prisms

    Neutron energy analysing by refraction with prisms allows to measure different wavelengths at the same time thus avoiding losses due to monochromatization. We built and tested a refractive energy analysing device made from small prisms, where losses only occur due to the attenuation in the material. We measured the refraction and the transmission of MgF2 and Si prisms at the V14 reflectometer in Berlin at 4.9 Å to check their applicability. The experimentally determined linear attenuation coefficients are 0.055 cm−1 for the MgF2 and 0.03 cm−1 for the Si prisms. An energy analyser consisting of silicon prism layers was measured at the EROS reflectometer at the LLB in a white neutron beam. The useful wavelength band was 2.4–7.6 Å. At 6.7 Å a wavelength resolution of 5% and a transmission of 53% were achieved. The surface roughness of the prisms could be determined to be (0.011±0.006)deg

  17. Neutron energy analysis by silicon prisms

    Schulz, J., E-mail: jennifer.schulz@helmholtz-berlin.de [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Ott, F. [Laboratoire Leon Brillouin, Bât 563 CEA Saclay, 91191 Gif sur Yvette Cedex (France); Hülsen, Ch.; Krist, Th. [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany)

    2013-11-21

    Neutron energy analysing by refraction with prisms allows to measure different wavelengths at the same time thus avoiding losses due to monochromatization. We built and tested a refractive energy analysing device made from small prisms, where losses only occur due to the attenuation in the material. We measured the refraction and the transmission of MgF{sub 2} and Si prisms at the V14 reflectometer in Berlin at 4.9 Å to check their applicability. The experimentally determined linear attenuation coefficients are 0.055 cm{sup −1} for the MgF{sub 2} and 0.03 cm{sup −1} for the Si prisms. An energy analyser consisting of silicon prism layers was measured at the EROS reflectometer at the LLB in a white neutron beam. The useful wavelength band was 2.4–7.6 Å. At 6.7 Å a wavelength resolution of 5% and a transmission of 53% were achieved. The surface roughness of the prisms could be determined to be (0.011±0.006)deg.

  18. Positioning.

    Conone, Ruth M.

    The key to positioning is the creation of a clear benefit image in the consumer's mind. One positioning strategy is creating in the prospect's mind a position that takes into consideration the company's or agency's strengths and weaknesses as well as those of its competitors. Another strategy is to gain entry into a position ladder owned by…

  19. Multiplicity of carbohydrate-binding sites in -prism fold lectins: occurrence and possible evolutionary implications

    Alok Sharma; Divya Chandran; Desh D Singh; M Vijayan

    2007-09-01

    The -prism II fold lectins of known structure, all from monocots, invariably have three carbohydrate-binding sites in each subunit/domain. Until recently, -prism I fold lectins of known structure were all from dicots and they exhibited one carbohydrate-binding site per subunit/domain. However, the recently determined structure of the -prism fold I lectin from banana, a monocot, has two very similar carbohydrate-binding sites. This prompted a detailed analysis of all the sequences appropriate for two-lectin folds and which carry one or more relevant carbohydrate-binding motifs. The very recent observation of a -prism I fold lectin, griffithsin, with three binding sites in each domain further confirmed the need for such an analysis. The analysis demonstrates substantial diversity in the number of binding sites unrelated to the taxonomical position of the plant source. However, the number of binding sites and the symmetry within the sequence exhibit reasonable correlation. The distribution of the two families of -prism fold lectins among plants and the number of binding sites in them, appear to suggest that both of them arose through successive gene duplication, fusion and divergent evolution of the same primitive carbohydrate-binding motif involving a Greek key. Analysis with sequences in individual Greek keys as independent units lends further support to this conclusion. It would seem that the preponderance of three carbohydrate-binding sites per domain in monocot lectins, particularly those with the -prism II fold, is related to the role of plant lectins in defence.

  20. Subsurface damage distribution characterization of ground surfaces using Abbott-Firestone curves

    Measurement of subsurface damage (SSD) induced by grinding process is of major interest in the development of high laser damage fused silica optical components manufacturing processes. Most SSD measurements methods give only access to the peak to peak value. We herein report on the benefit of using Abbott-Firestone curves to get an insight of the SSD distribution inside the optical material. We evidence on various diamond wheel ground fused silica substrates that such an approach is complementary to a classical SSD peak to peak measurement and bring useful information to optimize a grinding process. (authors)

  1. Quantitation of human chorionic gonadotropin with the Abbott IMx immunochemistry analyzer.

    van Oers, R J; Leerkes, B; Bertschi, I

    1990-01-01

    The analytical performance of the Abbott IMx automated system was studied and initial results from the human chorionic gonadotropin assay are presented: Within run and between day precision was good, the majority of all CVs lying between 3 and 5%; Patient results showed excellent comparability with our routine method; No significant specimen-related carry-over was detected; The automated IMx dilution protocol was found to be superior to the manual procedure; The usefulness of the instrument in routine use and as a "Stat" analyzer was very good. PMID:2179460

  2. Detection of Chlamydia trachomatis and Neisseria gonorrhoeae in Rectal and Oropharyngeal Swabs and Urine Specimens from Men Who Have Sex With Men with Abbott's M2000 RealTime.

    Moncada, Jeanne; Shayevich, Clara; Philip, Susan S; Lucic, Danijela; Schachter, Julius

    2015-11-01

    We evaluated Abbott's RealTime assay for the detection of Chlamydia trachomatis (CT) and Neisseria gonorrhoeae (GC) in the urethra, oropharynx, and rectum of 260 men who have sex with men. Compared with Hologic's AC2, RealTime had good agreement for detecting CT and GC. Overall, there were 25 CT and 44 GC AC2 positives, and 26 CT and 38 GC RealTime positives. For total negatives, there were 742 CT and 725 GC for AC2, 744 CT and 724 GC for RealTime. PMID:26457488

  3. An improved prism energy analyzer for neutrons

    The effects of two improvements of an existing neutron energy analyzer consisting of stacked silicon prism rows are presented. First we tested the effect of coating the back of the prism rows with an absorbing layer to suppress neutron scattering by total reflection and by refraction at small angles. Experiments at HZB showed that this works perfectly. Second the prism rows were bent to shift the transmitted wavelength band to larger wavelengths. At HZB we showed that bending increased the transmission of neutrons with a wavelength of 4.9 Å. Experiments with a white beam at the EROS reflectometer at LLB showed that bending of the energy analyzing device to a radius of 7.9 m allows to shift the transmitted wavelength band from 0 to 9 Å to 2 to 16 Å

  4. An improved prism energy analyzer for neutrons

    Schulz, J., E-mail: jennifer.schulz@helmholtz-berlin.de [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Ott, F. [Laboratoire Leon Brillouin, Bât 563 CEA Saclay, 91191 Gif sur Yvette Cedex (France); Krist, Th. [Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109 Berlin (Germany)

    2014-04-21

    The effects of two improvements of an existing neutron energy analyzer consisting of stacked silicon prism rows are presented. First we tested the effect of coating the back of the prism rows with an absorbing layer to suppress neutron scattering by total reflection and by refraction at small angles. Experiments at HZB showed that this works perfectly. Second the prism rows were bent to shift the transmitted wavelength band to larger wavelengths. At HZB we showed that bending increased the transmission of neutrons with a wavelength of 4.9 Å. Experiments with a white beam at the EROS reflectometer at LLB showed that bending of the energy analyzing device to a radius of 7.9 m allows to shift the transmitted wavelength band from 0 to 9 Å to 2 to 16 Å.

  5. Multicenter evaluation of the new Abbott Realtime assays for quantitative detection of human immunodeficiency virus type 1 and hepatitis C virus RNA

    M. Schutten (Martin); D. Peters (D.); N. Back (Nicole); A.W. van den Beld (Annewieke); B. Beuselinck (B.); V. Foulongne (V.); A.M. Geretti (Anna Maria); L. Pandiani (L.); M. Tiemann; H.G.M. Niesters (Bert)

    2007-01-01

    textabstractThe analytical performances of the new Abbott RealTime hepatitis C virus (HCV) and human immunodeficiency virus type 1 viral load assays were compared at nine laboratories with different competitor assays. These included the Abbott LcX, Bayer Versant bDNA, Roche COBAS Amplicor, and Roche

  6. Multicenter evaluation of the new Abbott RealTime assays for quantitative detection of human immunodeficiency virus type 1 and hepatitis C virus RNA

    Schutten, M; Peters, D; Back, N K T; Beld, M; Beuselinck, K; Foulongne, V; Geretti, A-M; Pandiani, L; Tiemann, C; Niesters, H G M

    2007-01-01

    The analytical performances of the new Abbott RealTime hepatitis C virus (HCV) and human immunodeficiency virus type 1 viral load assays were compared at nine laboratories with different competitor assays. These included the Abbott LcX, Bayer Versant bDNA, Roche COBAS Amplicor, and Roche COBAS TaqMa

  7. Abbott Wave-Triggered Runaway in Line-Driven Winds from Stars and Accretion Disks

    Feldmeier, A; Feldmeier, Achim; Shlosman, Isaac

    2001-01-01

    Line-driven winds from stars and accretion disks are accelerated by scattering in numerous line transitions. The wind is believed to adopt a unique critical solution, out of the infinite variety of shallow and steep solutions. We study the inherent dynamics of the transition towards the critical wind. A new runaway wind mechanism is analyzed in terms of radiative-acoustic (Abbott) waves which are responsible for shaping the wind velocity law and fixing the mass loss. Three different flow types result, depending on the location of perturbations. First, if the shallow solution is perturbed sufficiently far downstream, a single critical point forms in the flow, which is a barrier for Abbott waves, and the solution tends to the critical one. Second, if the shallow solution is perturbed upstream from this critical point, mass overloading results, and the critical point is shifted inwards. This wind exhibits a broad, stationary region of decelerating flow and its velocity law has kinks. Third, for perturbations eve...

  8. Development of the Abbott MATRIX Aero assay for the measurement of specific IgE.

    Lindberg, R E; Anawis, M A; Bailey, M; Mangat, D; Frank, P M; Hrusovsky, I G; Hooyman, L; Putterman, C; Defreese, J D

    1991-01-01

    An enzyme immunoassay has been developed for the quantitation of specific immunoglobulin E (IgE) in human serum to a panel of allergens. The assay system, called the Abbott MATRIX Aero, includes an instrument, reagents and test cell disposables. Each test cell contains fourteen airborne allergens individually localized on a nitrocellulose solid phase. Individual calibration curves for each allergen are established by the manufacturer and included in barcode form with each test kit. Stable factory calibration eliminates the need to establish a calibration curve with each assay run. The instrument automatically incubates, washes, and reads the test cell and prints each result, which ensures assay reproducibility and provides ease-of-use. Analysis of test results shows good agreement with another in vitro assay for specific IgE. The Abbott MATRIX Aero is a sensitive, reproducible and easy-to-use system for the measurement of specific IgE to a panel of fourteen allergens simultaneously using a single, small volume of serum. PMID:1806584

  9. Fresnel Prism on Hess Screen Test

    Kyung Min Koh; Ungsoo Samuel Kim

    2013-01-01

    A 65-year-old male patient complained of diplopia after a cataract surgery. He had esotropia of 18 prism diopters (PDs) at distant and near deviation, and therefore, we performed the Hess screen test to identify any abnormal eye movement. However, the indicator was found to be out of bounds, and therefore, the test could not be completed. Therefore, the test was subsequently performed with a 20 PD base-out Fresnel prism, and an abduction deficit was observed in the right eye, but not in the l...

  10. Symmetry Breaking Analysis of Prism Adaptation's Latent Aftereffect

    Frank, Till D.; Blau, Julia J. C.; Turvey, Michael T.

    2012-01-01

    The effect of prism adaptation on movement is typically reduced when the movement at test (prisms off) differs on some dimension from the movement at training (prisms on). Some adaptation is latent, however, and only revealed through further testing in which the movement at training is fully reinstated. Applying a nonlinear attractor dynamic model…

  11. 21 CFR 886.1655 - Ophthalmic Fresnel prism.

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic Fresnel prism. 886.1655 Section 886...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1655 Ophthalmic Fresnel prism. (a) Identification. An ophthalmic Fresnel prism is a device that is a thin plastic sheet with embossed rulings...

  12. 21 CFR 886.1665 - Ophthalmic rotary prism.

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic rotary prism. 886.1665 Section 886.1665...) MEDICAL DEVICES OPHTHALMIC DEVICES Diagnostic Devices § 886.1665 Ophthalmic rotary prism. (a) Identification. An ophthalmic rotary prism is a device with various prismatic powers intended to be handheld...

  13. 21 CFR 886.5810 - Ophthalmic prism reader.

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic prism reader. 886.5810 Section 886.5810...) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5810 Ophthalmic prism reader. (a) Identification. An ophthalmic prism reader is a device intended for use by a patient who is in a supine...

  14. Comparing the Volumes of Rectangular Prisms

    Assuah, Charles K.; Wiest, Lynda R.

    2010-01-01

    Can middle-grades students determine which of two rectangular prisms has a larger volume? Can they do so without using a formula? Geometry, and particularly the concept of volume, is important in many subjects, such as physics and chemistry. Students greatly enhance their mathematics knowledge when they make generalizations and construct arguments…

  15. Prisms Throw Light on Developmental Disorders

    Brookes, Rebecca L.; Nicolson, Roderick I.; Fawcett, Angela J.

    2007-01-01

    Prism adaptation, in which the participant adapts to prismatic glasses that deflect vision laterally, is a specific test of cerebellar function. Fourteen dyslexic children (mean age 13.5 years); 14 children with developmental coordination disorder (DCD): 6 of whom had comorbid dyslexia; and 12 control children matched for age and IQ underwent…

  16. Dispersion Compensation with a Prism-pair

    Shaked, Yaakov; Pe'er, Avi

    2014-01-01

    We present a detailed calculation of the total dispersion (spectral phase) from a pair of Brewster-cut prisms. This paper aims to aid advanced students in tracking the operation of this major configuration for dispersion-compensation and phase-control of ultra-short pulses.

  17. CHR(PRISM)-based Probabilistic Logic Learning

    Sneyers, Jon; Vennekens, Joost; Kameya, Yoshitaka; Sato, Taisuke; 10.1017/S1471068410000207

    2010-01-01

    PRISM is an extension of Prolog with probabilistic predicates and built-in support for expectation-maximization learning. Constraint Handling Rules (CHR) is a high-level programming language based on multi-headed multiset rewrite rules. In this paper, we introduce a new probabilistic logic formalism, called CHRiSM, based on a combination of CHR and PRISM. It can be used for high-level rapid prototyping of complex statistical models by means of "chance rules". The underlying PRISM system can then be used for several probabilistic inference tasks, including probability computation and parameter learning. We define the CHRiSM language in terms of syntax and operational semantics, and illustrate it with examples. We define the notion of ambiguous programs and define a distribution semantics for unambiguous programs. Next, we describe an implementation of CHRiSM, based on CHR(PRISM). We discuss the relation between CHRiSM and other probabilistic logic programming languages, in particular PCHR. Finally we identify ...

  18. Efficient broadband second-harmonic generation by dispersive achromatic nonlinear conversion using only prisms

    Richman, B.A.; Bisson, S.E.; Trebino, R.

    1997-12-01

    Using a lossless dispersive apparatus consisting of six prisms, optimized to match a second-harmonic crystal phase-matching angle vs. wavelength to second order, we efficiently doubled tunable fundamental light near 660 nm over a range of 80 nm using a 4-mm-long type-I {beta}-Barium Borate (BBO) crystal. Another lossless set of six prisms after the crystal realigned the propagation directions of the various second-harmonic frequencies to be collinear to within 1/4 spot diameter in position and 200 {mu}rad in angle. The measured conversion efficiency of a 40-mJ, 5-ns fundamental pulse was 10%.

  19. Enraizamento de estacas caulinares de kiwi (Actinidia chinensis Planch cv Abbott tratadas com auxinas e boro Rooting of kiwi stem cuttings (Actinidia chinensis Planch. cv Abbott treated with auxins and boron

    E.G. Ono

    1995-12-01

    Full Text Available O trabalho teve como finalidade, estudar o efeito de várias auxinas sintéticas em formulações comerciais e do boro, sobre o enraizamento de estacas caulinares de kiwi (Actinidia chinensis Planch, cv Abbott.. As estacas utilizadas continham dois nós e duas folhas cortadas ao meio, com aproximadamente 10 cm de comprimento, onde o corte basal em bisel foi realizado logo abaixo de um nó e o apical acima do outro nó. O efeito das auxinas, sobre o enraizamento de estacas caulinares de kiwi foi verificado mediante os seguintes tratamentos, aplicados sobre as bases das estacas: T1 H(20; T2 (NAA 300 ppm; T3 (IBA 300 ppm; T4 (NAA 300 ppm + B; T5 (IBA 300 ppm + B; T6 (NAA 0,5%-pó e T7 (IBA 0,5%-pó. Após o tratamento das estacas, estas foram plantadas em bandejas de enraizamento, contendo vermiculita pura e colocadas em câmara de nebulização, onde permaneceram por 120 dias, até a sua coleta. Para a avaliação do efeito de auxinas e do ácido bórico, sobre o enraizamento de estacas caulinares de kiwi, foram realizadas as seguintes observações: 1. porcentagem de estacas enraizadas; 2. análise de açúcares redutores e açúcares totais (em g/100 g de matéria seca; 3. análise de triptofano (em µg/100 mg de matéria seca. Os resultados obtidos no processo de enraizamento de estacas caulinares de kiwi (Actinidia chinensis Planch. variedade Abbott, levou a concluir que o inverno e outono foram as melhores épocas de coleta dos ramos de auxinas para a confecção das estacas. O processo de enraizamento foi ainda incrementado com a aplicação exógena na base das estacas, sendo que o alto teor de açúcares redutores e totais beneficiou a maior porcentagem de enraizamento.This study was carried out to evaluate the effects of some synthetical auxins and boron trade formulations in the rooting of stem cuttings of some kiwi (Actinidia chinensis Planch varieties. The experiment was carried out in a misty nebulization chamber in the Botany

  20. Self-referenced prism deflection measurement schemes with microradian precision

    Olson, R; Bergeson, S; Durfee, D S; Olson, Rebecca; Paul, Justin; Bergeson, Scott; Durfee, Dallin S.

    2005-01-01

    We have demonstrated several inexpensive methods which can be used to measure the deflection angles of prisms with microradian precision. The methods are self-referenced, using various reversals to achieve absolute measurements without the need of a reference prism or any expensive precision components other than the prisms under test. These techniques are based on laser interferometry and have been used in our lab to characterize parallel-plate beamsplitters, penta prisms, right angle prisms, and corner cube reflectors using only components typically available in an optics lab.

  1. Abbott AXSYM免疫分析仪几种节约试剂方法

    徐忠玉; 梁声强; 邓小军

    2006-01-01

    Abbott AXSYM免疫分析仪是目前比较理想的全自动免疫分析仪器,但该仪器所用的试剂昂贵也是实际。因此如何在不影响检测结果的基础上,节约成本、减少浪费是值得关注的问题。我们在使用过程中,摸索和总结了几种节约试剂用量和利用剩余试剂的方法,现介绍如下,供参考。

  2. 美国Abbott Axsym免疫分析仪性能初步评价

    成军; 袁兴旺; 金晶; 王国政; 孙长贵; 孙关忠

    2003-01-01

    @@ 随着国内临床免疫学实验室自动化程度的不断提高,全自动免疫分析仪逐步得到普及和应用[1],本文以检测乙型肝炎病毒表面抗原(HBsAg)为例,对美国Abbott Axsym免疫分析仪微粒子酶免疫分析(MEIA)技术的灵敏度、可检测性、特异性、重复性、线性、干扰试验及与酶联免疫吸附试验(ELISA)检测HBsAg的相关性等指标进行了检测,以评价其性能.

  3. 巧用AbbottC8000的Retest功能进行试剂比对

    刘风华

    2013-01-01

    目的通过AbbottC8000本身具有的“RetestRule”功能进行试剂间的比对,观察同一仪器同一项目不同试剂间的检测结果是否具有可比性。方法在Abbott(;8000上调试同一项目两种试剂(bun)参数,并设定“RetestRule”。结果通过对比对数据的统计学分析,得到两系统间相关性良好,R2=0.9991。结论运用Ab—bottC8000的“RetestRule”功能可以简便、快捷的完成比对实验,值得推广。

  4. Multivariable control for the PRISM ALMR

    This paper describes the application of state variable control design methods in the conceptual design of two key system level controllers in the PRISM ALMR. The PRISM plant concept consists of three power blocks, each made up of three identical reactors and steam generator modules connected to one turbine. Operation of these physically distributed systems is directed by a hierarchy of controllers at the system, power block, and plant levels. The system level controllers in this paper are the reactivity controllers for movement of the six control rods in each of the nine reactor modules, and the feedwater control of the three parallel steam generators in each of the three power blocks. 4 refs., 6 figs., 1 tab

  5. Risley prism universal pointing system (RPUPS)

    Dixon, John; Engel, James R.; Vaillancourt, Robert; Schwarze, Craig; Potter, Kevin

    2015-09-01

    OPTRA is currently developing a Risley Prism Universal Pointing System (RPUPS): a highly customizable cued beamsteering system. The RPUPS consists of a visible or infrared cueing imager co-aligned with an optical beam steering system's pointing-field-of-regard. The cueing imager is used to identify a region-of-interest within its wide field-of-view, via a wireless tablet device. The tablet user can choose to manually or automatically, identify and track regions-of-interest. The optical beam steering system uses a matched pair of Risley Prisms to direct an interrogating optical system's instantaneous-field-of-view onto the identified region-of-interest. The tablet updates the user with real time information from both the cueing imager and the interrogating optical system. Risley prism material and geometry choices provide operating wavelength, aperture size, and field-of-regard flexibility for this front-end pointing component. Back-end components may be receive-only, transmit-only, or transmit/receive combinations. The flexibility of the RPUPS allows for mission specific customization where applications include but are not limited to: synthetic foveated imaging, spectroscopic probes and laser (LIDAR) ranging and tracking. This paper will focus on the design and anticipated applications of the RPUPS.

  6. Impact of the New Abbott mPLUS Feature on Clinical Laboratory Efficiencies of Abbott RealTime Assays for Detection of HIV-1, Hepatitis C Virus, Hepatitis B Virus, Chlamydia trachomatis, and Neisseria gonorrhoeae

    Lucic, Danijela; Jones, Sara; Wiesneth, Russ; Barry, Cathy; Webb, Erika; Belova, Larissa; Dolan, Peggy; Ho, Shiaolan; Abravaya, Klara; Cloherty, Gavin

    2013-01-01

    Diagnostic laboratories are under increasing pressure to improve and expand their services. Greater flexibility in sample processing is a critical factor that can improve the time to results while reducing reagent waste, making laboratories more efficient and cost-effective. The introduction of the Abbott mPLUS feature, with the capacity for extended use of amplification reagents, significantly increases the flexibility of the m2000 platform and enables laboratories to customize their workflo...

  7. PRogram In Support of Moms (PRISM): Development and Beta Testing.

    Byatt, Nancy; Pbert, Lori; Hosein, Safiyah; Swartz, Holly A; Weinreb, Linda; Allison, Jeroan; Ziedonis, Douglas

    2016-08-01

    Most women with perinatal depression do not receive depression treatment. The authors describe the development and beta testing of a new program, PRogram In Support of Moms (PRISM), to improve treatment of perinatal depression in obstetric practices. A multidisciplinary work group of seven perinatal and behavioral health professionals was convened to design, refine, and beta-test PRISM in an obstetric practice. Iterative feedback and problem solving facilitated development of PRISM components, which include provider training and a toolkit, screening procedures, implementation assistance, and access to immediate psychiatric consultation. Beta testing with 50 patients over two months demonstrated feasibility and suggested that PRISM may improve provider screening rates and self-efficacy to address depression. On the basis of lessons learned, PRISM will be enhanced to integrate proactive patient engagement and monitoring into obstetric practices. PRISM may help overcome patient-, provider-, and system-level barriers to managing perinatal depression in obstetric settings. PMID:27079994

  8. Minimal residual HIV viremia: verification of the Abbott Real-Time HIV-1 assay sensitivity

    Alessandra Amendola

    2010-06-01

    Full Text Available Introduction: In the HIV-1 infection, the increase in number of CD4 T lymphocytes and the viral load decline are the main indicators of the effectiveness of antiretroviral therapy. On average, 85% of patients receiving effective treatment has a persistent suppression of plasma viral load below the detection limit (<50 copies/mL of clinically used viral load assays, regardless of treatment regimen in use. It is known, however, that, even when viremia is reduced below the sensitivity limit of current diagnostic assays, the virus persists in “reservoirs” and traces of free virions can be detected in plasma.There is a considerable interest to investigate the clinical significance of residual viremia. Advances in molecular diagnostics allows nowadays to couple a wide dynamic range to a high sensitivity.The Abbott Real-time HIV-1 test is linear from 40 to 107 copies/mL and provides, below 40 copies/mL, additional information such as “<40cp/mL, target detected” or “target not detected”. The HIV-1 detection is verified by the max-Ratio algorithm software.We assessed the test sensitivity when the qualitative response is considered as well. Methods: A ‘probit’ analysis was performed using dilutions of the HIV-1 RNA Working Reagent 1 for NAT assays (NIBSC code: 99/634, defined in IU/mL and different from that used by the manufacturer (VQA,Virology Quality Assurance Laboratory of the AIDS Clinical Trial Group for standardization and definition of performances.The sample input volume (0.6 mL was the same used in clinical routine. A total of 196 replicates at concentrations decreasing from 120 to 5 copies/mL, in three different sessions, have been tested.The ‘probit’ analysis (binomial dose-response model, 95% “hit-rate” has been carried out on the SAS 9.1.3 software package. Results: The sensitivity of the “<40cp/mL, target detected” response was equal to 28,76 copies/mL, with 95% confidence limits between 22,19 and 52,27 copies

  9. Performance of the Abbott RealTime CT/NG for Detection of Chlamydia trachomatis and Neisseria gonorrhoeae▿

    Gaydos, C A; Cartwright, C P; Colaninno, P.; Welsch, J.; Holden, J; Ho, S. Y.; Webb, E. M.; Anderson, C.; Bertuzis, R.; Zhang, L.; Miller, T; Leckie, G.; Abravaya, K.; Robinson, J.

    2010-01-01

    A multicenter clinical study was conducted to evaluate the performance characteristics of the Abbott RealTime CT/NG assay, a multiplex real-time PCR assay, for simultaneous detection of Chlamydia trachomatis and Neisseria gonorrhoeae. The specimens were collected from a total of 3,832 male and female subjects at 16 geographically diverse sites. Specimens included male and female urine samples, male urethral swabs, female endocervical swabs, and self-collected and clinician-collected vaginal s...

  10. Evaluation of an Automated Liquid-Handling System (Tecan Genesis RSP 100) in the Abbott LCx Assay for Chlamydia trachomatis

    Hanson, Kevan L.; Cartwright, Charles P.

    2001-01-01

    The present study investigated the feasibility of automating the specimen-pipetting component of sample preparation in the LCx Chlamydia assay (LCx-CT assay; Abbott Laboratories, Chicago, Ill.) by using a commercially available liquid-handling system (Tecan Genesis RSP100; Tecan Inc., Research Triangle Park, N.C.). The Tecan instrument proved to be comparable in both precision and accuracy to a manual multipipettor (Eppendorf model 4850; Eppendorf Scientific, Westbury, N.Y.). The Tecan instru...

  11. Pure rotation of a prism on a ramp

    Zhao, Zhen; Liu, Caishan; Ma, Daolin

    2014-01-01

    In this work, we study a prism with a cross section in polygon rolling on a ramp inclined at a small angle. The prism under gravity rolls purely around each individual edge, intermittently interrupted by a sequence of face collisions between the side face of the prism and the ramp. By limiting the prism in a planar motion, we propose a mathematical model to deal with the events of the impacts. With a pair of laser-Doppler vibrometers, experiments are also conducted to measure the motions of v...

  12. Wollaston prism phase-stepping point diffraction interferometer and method

    Rushford, Michael C.

    2004-10-12

    A Wollaston prism phase-stepping point diffraction interferometer for testing a test optic. The Wollaston prism shears light into reference and signal beams, and provides phase stepping at increased accuracy by translating the Wollaston prism in a lateral direction with respect to the optical path. The reference beam produced by the Wollaston prism is directed through a pinhole of a diaphragm to produce a perfect spherical reference wave. The spherical reference wave is recombined with the signal beam to produce an interference fringe pattern of greater accuracy.

  13. Inverse solutions for a Risley prism scanner with iterative refinement by a forward solution.

    Li, Anhu; Gao, Xinjian; Sun, Wansong; Yi, Wanli; Bian, Yongming; Liu, Hongzhan; Liu, Liren

    2015-11-20

    Risley prism scanners are increasingly used for laser beam steering due to their wide angular scanning range and high resolution. However, the inverse problem, which focuses on obtaining the required prisms' orientations for a given target position, has not been perfectly solved so far. The existing inverse solutions are not accurate or efficient enough for high-accuracy and real-time tracking. An iterative method that combines an approximate inverse solution with an iterative refinement by the forward solution is set forth in this paper. Two case studies indicate that the rotation motions of Risley prism pairs controlled by iterative solutions can slew the beam to create the desired tracking pattern quickly and accurately. Based on this method, a Risley prism scanner developed as a standard trajectory generator is implemented for the error measurement of a robotic manipulator in our experiments. The simulation and experimental results show that the inverse solution for one target point can be obtained within nine iterations for a prescribed tracking error threshold. PMID:26836567

  14. Inherent safety and design certification of PRISM

    General Electric Company has introduced an innovative technological approach to reactor design that, when combined with change in US Nuclear Regulatory Commission (NRC) practice, will lead to safe and economically competitive fast breeder reactor electric power plants. The key elements in this approach are characteristics in the reactor that will cause it to passively control reactivity and shutdown and passively cool itself without action by the human operators or active devices that require energy supplies external to the reactor module. These characteristics have been called the inherent features or the inherency of the design. They are inherent because they depend on only the material and geometric properties of the reactor module design. Thermal expansion and deflections as well as temperature dependent nuclear properties, such as the Doppler effect, are examples of inherent behavior. Natural convection due to density differences in fluid coolant paths is another example. These characteristics do not depend on active devices that require external energy supplies. PRISM uses natural circulation cooling for safety grade decay heat removal. Negative reactivity feedback with increasing temperature will balance the power generated with the heat removed. The PRISM also incorporates a factory fabricated containment barrier that encloses the reactor and primary coolant. The reactor module design is being developed so that the inherent characteristics of the reactor module can be tested in a full scale prototype. Results from this testing along with other safety and design information will be used to obtain NRC Design Certification

  15. Illusory reversal of causality between touch and vision has no effect on prism adaptation rate

    HirokazuTanaka

    2012-12-01

    Full Text Available Learning, according to Oxford Dictionary, is “to gain knowledge or skill by studying, from experience, from being taught, etc.” In order to learn from experience, the central nervous system has to decide what action leads to what consequence, and temporal perception plays a critical role in determining the causality between actions and consequences. In motor adaptation, causality between action and consequence is implicitly assumed so that a subject adapts to a new environment based on the consequence caused by her action. Adaptation to visual displacement induced by prisms is a prime example; the visual error signal associated with the motor output contributes to the recovery of accurate reaching, and a delayed feedback of visual error can decrease the adaptation rate. Subjective feeling of temporal order of action and consequence, however, can be modified or even reversed when her sense of simultaneity is manipulated with an artificially delayed feedback. Our previous study (Tanaka, Homma & Imamizu (2011 Exp Brain Res demonstrated that the rate of prism adaptation was unaffected when the subjective delay of visual feedback was shortened. This study asked whether subjects could adapt to prism adaptation and whether the rate of prism adaptation was affected when the subjective temporal order was illusory reversed. Adapting to additional 100 ms delay and its sudden removal caused a positive shift of point of simultaneity in a temporal-order judgment experiment, indicating an illusory reversal of action and consequence. We found that, even in this case, the subjects were able to adapt to prism displacement with the learning rate that was statistically indistinguishable to that without temporal adaptation. This result provides further evidence to the dissociation between conscious temporal perception and motor adaptation.

  16. Testing the PRISM Temperature Model in Complex Terrain: Implications for Mountain Ecohydrology

    Strachan, S.; Daly, C.; Millar, C.

    2015-12-01

    Studies in mountainous terrain related to ecology and hydrology often use interpolated climate products because of a lack of local observations. One dataset frequently used to develop plot-to-watershed scale climatologies is the PRISM (Parameter-elevation Regression on Independent Slopes Model) temperature model. Benefits of this approach include geographically-weighted station observations and topographic positioning modifiers, which become important factors for predicting temperature in complex topography. Because of the paucity of long-term climate records in mountain environments, validation of PRISM algorithms across diverse regions remains challenging, with end users instead relying on atmospheric relationships derived in sometimes distant geographic settings. Recent developments of the PRISM model have increased temporal resolution capability from monthly to daily, which in turn has allowed a reasonable test of PRISM performance during a single season at distributed points across a large watershed. Presented are results from testing instrumental observations of daily max/min temperature on 16 sites in the Walker Basin, CA-NV, located on open woodland slopes ranging from 1967 to 3111 m in elevation. Individual site MAE varies from 1.34 to 4.22 C with better performance observed during summertime as opposed to winter. We observe a consistent bias in minimum temperatures for all seasons across all sites, with bias in maximum temperatures varying with season. Model error for minimum is associated strongly with elevation, whereas model error for maximum is associated with topographic radiative indices (solar exposure and heat loading). These results indicate that actual temperature conditions across open mountain woodland slopes are more heterogeneous than interpolated models (such as PRISM) indicate, which in turn impacts prediction/modeling of landscape processes such as ecological niches, bioclimatic refugia, and snow hydrology.

  17. Identifying Codes in the Complementary Prism of Cycles

    Cappelle, Marcia R.; Coelho, Erika M. M.; Coelho, Hebert; Penso, Lucia D.; Rautenbach, Dieter

    2015-01-01

    We show that an identifying code of minimum order in the complementary prism of a cycle of order $n$ has order $7n/9+\\Theta(1)$. Furthermore, we observe that the clique-width of the complementary prism of a graph of clique-width $k$ is at most $4k$, and discuss some algorithmic consequences.

  18. A Study of the PDGF Signaling Pathway with PRISM

    Qixia Yuan; Jun Pang; Sjouke Mauw; Panuwat Trairatphisan; Monique Wiesinger; Thomas Sauter

    2011-01-01

    In this paper, we apply the probabilistic model checker PRISM to the analysis of a biological system -- the Platelet-Derived Growth Factor (PDGF) signaling pathway, demonstrating in detail how this pathway can be analyzed in PRISM. We show that quantitative verification can yield a better understanding of the PDGF signaling pathway.

  19. New Light on a Prism: The Concert for All Reasons

    Linaberry, Robin

    2004-01-01

    The prism concert concept was introduced in this country at the Eastman School of Music in 1975. The development of Eastman's inaugural prism concert is commonly attributed to Donald Hunsberger and Gustav Meier, conductors of the wind ensemble and orchestra, respectively. The basic idea is that different styles of music performed by different…

  20. The Variprism: A Large-Range Variable Prism for Measurement of the Angle of Squint

    Simonsz, Huib

    1988-01-01

    textabstractPrism bars and variable Herschel prisms are most commonly used today to measure the angle of squint. Both have drawbacks, however. Prism bars are too large to carry around all day and are usually limited to 40 prism diopters (PD), while variable Herschel prisms have even smaller ranges. Hans Meester and I have therefore developed, at the Netherlands Ophthalmic Research Institute, Amsterdam, a hand-held prism that is continuously variable over a large range, horizontally as well as...

  1. Evaluation of 3 automated real-time PCR (Xpert C. difficile assay, BD MAX Cdiff, and IMDx C. difficile for Abbott m2000 assay) for detecting Clostridium difficile toxin gene compared to toxigenic culture in stool specimens.

    Yoo, Jaeeun; Lee, Hyeyoung; Park, Kang Gyun; Lee, Gun Dong; Park, Yong Gyu; Park, Yeon-Joon

    2015-09-01

    We evaluated the performance of the 3 automated systems (Cepheid Xpert, BD MAX, and IMDx C. difficile for Abbott m2000) detecting Clostridium difficile toxin gene compared to toxigenic culture. Of the 254 stool specimens tested, 87 (48 slight, 35 moderate, and 4 heavy growth) were toxigenic culture positive. The overall sensitivities and specificities were 82.8% and 98.8% for Xpert, 81.6% and 95.8% for BD MAX, and 62.1% and 99.4% for IMDx, respectively. The specificity was significantly higher in IMDx than BD MAX (P= 0.03). All stool samples underwent toxin A/B enzyme immunoassay testing, and of the 254 samples, only 29 samples were positive and 2 of them were toxigenic culture negative. Considering the rapidity and high specificity of the real-time PCR assays compared to the toxigenic culture, they can be used as the first test method for C. difficile infection/colonization. PMID:26081240

  2. Efficacy of enteroclysis through Miller-Abbott tube for decompression in patients with postoperative intestinal obstruction

    The purpose of this study is to assess the efficacy of enteroclysis through the previously inserted Miller-Abbott (M-A) tube for decompression in the postoperative intestinal obstruction. This study includes twenty patients who has intestinal obstruction symptoms after operation for benign(12) or malignant(8) abdominal lesions. Small amount of barium was introduced to M-A tube for enteroclysis. We evaluated the presence, level, degree, and causes of obstruction on enteroclysis, compared with surgical(11) and clinical(9) findings. Obstruction was seen in 18 cases including the two cases in which the level of obstruction was not clear. There was no obstruction in two cases. Obstruction on enteroclysis was demonstrated in all 11 operated cases(100% accuracy, 11/11). The level of obstruction on enteroclysis were jejunum in three cases, ileum in seven, and colon in one case. The levels of obstruction on enteroclysis were matched with those in operation field in 10 cases. There were two cases of nonobstruction on enteroclysis were jejunum in three cases, ileum in seven, and colon in one case. The levels of obstruction on enteroclysis were matched with those in operation field in 10 cases. There were two cases of nonobstruction, nine cases of low-grade partial obstruction, and nine cases of high-grade partial obstruction. We analyzed the findings on enteroclysis regarding causes of obstruction in 16 patients with the findings of adhesive bands of extrinsic cause(9), cancer recurrence of intrinsic cause(6), and bezoar of intraluminal cause(1). Misinterpreted cases were two cases(87.7% accuracy, 14/16). The cause, for nonvisualization of obstruction site on enteroclysis in four patients included technical failure such as inadequate location of tube(1) and bowel overlapping(1), minimal obstruction(1), and nonexistent obstruction(1), in spite of diffuse edematous mucosa. Enteroclysis through the M-A tube for decompression in patients with postoperative intestinal obstruction

  3. Active stereo vision routines using PRISM-3

    Antonisse, Hendrick J.

    1992-11-01

    This paper describes work in progress on a set of visual routines and supporting capabilities implemented on the PRISM-3 real-time vision system. The routines are used in an outdoor robot retrieval task. The task requires the robot to locate a donor agent -- a Hero2000 -- which holds the object to be retrieved, to navigate to the donor, to accept the object from the donor, and return to its original location. The routines described here will form an integral part of the navigation and wide-area search tasks. Active perception is exploited to locate the donor using real-time stereo ranging directed by a pan/tilt/verge mechanism. A framework for orchestrating visual search has been implemented and is briefly described.

  4. Spatial compression impairs prism-adaptation in healthy individuals

    Roger Newport

    2013-05-01

    Full Text Available Neglect patients typically present with gross inattention to one side of space following damage to the contralateral hemisphere. While prism-adaptation is effective in ameliorating some neglect behaviours, the mechanisms involved and their relationship to neglect remain unclear. Recent studies have shown that conscious strategic control processes in prism-adaptation may be impaired in neglect patients, who are also reported to show extraordinarily long aftereffects compared to healthy participants. Determining the underlying cause of these effects may be the key to understanding therapeutic benefits. Alternative accounts suggest that reduced strategic control might result from a failure to detect prism-induced reaching errors properly either because a the size of the error is underestimated in compressed visual space or b pathologically increased error detection thresholds reduce the requirement for error correction. The purpose of this study was to model these two alternatives in healthy participants and to examine whether strategic control and subsequent aftereffects were abnormal compared to standard prism adaptation. Each participant completed three prism-adaptation procedures within a MIRAGE mediated reality environment with direction errors recorded before, during and after adaptation. During prism-adaptation, visual-feedback of the reach could be compressed, perturbed by noise or represented veridically. Compressed visual space significantly reduced strategic control and aftereffects compared to control and noise conditions. These results support recent observations in neglect patients, suggesting that a distortion of spatial representation may successfully model neglect and explain neglect performance while adapting to prisms.

  5. Efficient broadband second-harmonic generation by dispersive achromatic nonlinear conversion using only prisms

    Using a lossless dispersive apparatus consisting of six prisms, optimized to match a second-harmonic crystal phase-matching angle versus wavelength to second order, we efficiently doubled tunable fundamental light near 660nm over a range of 80nm, using a 4-mm-long type I β-barium borate crystal without tuning the crystal angle. Another set of six prisms after the crystal realigned the propagation directions of the various second-harmonic frequencies to be collinear to within 1/4 spot diameter in position and 200 μrad in angle. The measured conversion efficiency of a 40-mJ, 5-ns fundamental pulse was 10%. copyright 1998 Optical Society of America

  6. Multicenter Evaluation of the New Abbott RealTime Assays for Quantitative Detection of Human Immunodeficiency Virus Type 1 and Hepatitis C Virus RNA▿

    Schutten, M.; Peters, D.; Back, N.K.T.; Beld, M; Beuselinck, K.; Foulongne, V.; Geretti, A.-M.; Pandiani, L.; Tiemann, C; Niesters, H.G.M.

    2007-01-01

    The analytical performances of the new Abbott RealTime hepatitis C virus (HCV) and human immunodeficiency virus type 1 viral load assays were compared at nine laboratories with different competitor assays. These included the Abbott LcX, Bayer Versant bDNA, Roche COBAS Amplicor, and Roche COBAS TaqMan assays. Two different protocols used during the testing period with and without a pre-m1000 RNA isolation spin were compared. The difference proved to be nonsignificant. A uracil-N-glycosylase (U...

  7. Comparison of the Abbott m2000 HIV-1 Real-Time and Roche AMPLICOR Monitor v1.5 HIV-1 assays on plasma specimens from Rakai, Uganda

    Ssebugenyi, I.; Kizza, A; Mpoza, B; Aluma, G.; Boaz, I.; Newell, K.; Laeyendecker, O; Shott, J P; Serwadda, D; Reynolds, S.J.

    2011-01-01

    The need for viral load (VL) monitoring of HIV patients receiving antiretroviral therapy (ART) in resource-limited settings (RLS) has become apparent with studies showing the limitations of immunological monitoring. We compared the Abbott m2000 Real-Time (Abbott) HIV-1 assay with the Roche AMPLICOR Monitor v1.5 (Roche) HIV-1 assay over a range of VL concentrations. Three hundred and eleven plasma samples were tested, including 164 samples from patients on ART ≥ six months and 147 from ART-naï...

  8. Abbott Aeroset全自动生化分析仪安装调试故障浅析

    苏娜; 胡远明

    2002-01-01

    @@ 我科于2001年11月28日安装了一台Abbott Aeroset全自动生化分析仪,在安装和调试期间出现的几例典型故障及其排除方法介绍如下,以供同行在使用该型号或同等档次的全自动生化分析仪时参考. Abbott Aeroset出厂时虽以整机装箱,在实验室安装时,安装部件只有近水管、4根废液管和2根加样针、4根试剂针加上搅拌器和比色杯以及工作站SCC,容易被工程师忽略整机中的其他部件,这就会导致一些很难觉察的故障.

  9. Mining the Digital Hamburg/ESO Objective Prism Survey

    Christlieb, N.; Wisotzki, L.; Reimers, D.

    2000-01-01

    We report on the exploitation of the stellar content of the Hamburg/ESO objective prism survey by quantitative selection methods, such as automatic spectral classification, and first results obtained.

  10. Recognizing Variable Environments The Theory of Cognitive Prism

    Dong, Tiansi

    2012-01-01

    Normal adults do not have any difficulty in recognizing their homes. But can artificial systems do in the same way as humans? This book collects interdisciplinary evidences and presents an answer from the perspective of computing, namely, the theory of cognitive prism. To recognize an environment, an intelligent system only needs to classify objects, structures them based on the connection relation (not through measuring!), subjectively orders the objects, and compares with the target environment, whose knowledge is similarly structured. The intelligent system works, therefore, like a prism: when a beam of light (a scene) reaches (is perceived) to an optical prism (by an intelligent system), some light (objects) is reflected (are neglected), those passed through (the recognized objects) are distorted (are ordered differently). So comes the term 'cognitive prism'! Two fundamental propositions used in the theory can be informally stated as follow: an orientation relation is a kind of distance comparison relatio...

  11. Strongly-Refractive One-Dimensional Photonic Crystal Prisms

    Ting, David Z. (Inventor)

    2004-01-01

    One-dimensional (1D) photonic crystal prisms can separate a beam of polychromatic electromagnetic waves into constituent wavelength components and can utilize unconventional refraction properties for wavelength dispersion over significant portions of an entire photonic band rather than just near the band edges outside the photonic band gaps. Using a ID photonic crystal simplifies the design and fabrication process and allows the use of larger feature sizes. The prism geometry broadens the useful wavelength range, enables better optical transmission, and exhibits angular dependence on wavelength with reduced non-linearity. The properties of the 1 D photonic crystal prism can be tuned by varying design parameters such as incidence angle, exit surface angle, and layer widths. The ID photonic crystal prism can be fabricated in a planar process, and can be used as optical integrated circuit elements.

  12. Dynamics of a microliquid prism actuated by electrowetting.

    Lee, Duck-Gyu; Park, Jaebum; Bae, Jungmok; Kim, Ho-Young

    2013-01-21

    A microliquid prism is a microchannel filled with two immiscible liquids, whose interface acts as a refractive surface. To steer a light beam that constructs optical images, the interface profile or the contact angle is modulated through electrowetting on a dielectric. Accurate, yet agile actuation of the liquid prism critically depends on the understanding of dynamics of the fluid interface. Here we fabricate liquid prisms, visualize the shape evolution of the interface, and theoretically model its dynamics. By comparing the magnitude of capillary forces to those of viscous, inertial and hydrostatic forces, we find that the meniscus motion within submillimetric channels is dominated by the capillary effect. The theoretical predictions for microscale meniscus dynamics are shown to agree well with the experimental measurements. We then discuss the formation of waves in millimetric liquid prisms, which may significantly limit fast and reliable operation of the optofluidic device. PMID:23165931

  13. Cerebellar cathodal tDCS interferes with recalibration and spatial realignment during prism adaptation procedure in healthy subjects.

    Panico, Francesco; Sagliano, Laura; Grossi, Dario; Trojano, Luigi

    2016-06-01

    The aim of this study is to clarify the specific role of the cerebellum during prism adaptation procedure (PAP), considering its involvement in early prism exposure (i.e., in the recalibration process) and in post-exposure phase (i.e., in the after-effect, related to spatial realignment). For this purpose we interfered with cerebellar activity by means of cathodal transcranial direct current stimulation (tDCS), while young healthy individuals were asked to perform a pointing task on a touch screen before, during and after wearing base-left prism glasses. The distance from the target dot in each trial (in terms of pixels) on horizontal and vertical axes was recorded and served as an index of accuracy. Results on horizontal axis, that was shifted by prism glasses, revealed that participants who received cathodal stimulation showed increased rightward deviation from the actual position of the target while wearing prisms and a larger leftward deviation from the target after prisms removal. Results on vertical axis, in which no shift was induced, revealed a general trend in the two groups to improve accuracy through the different phases of the task, and a trend, more visible in cathodal stimulated participants, to worsen accuracy from the first to the last movements in each phase. Data on horizontal axis allow to confirm that the cerebellum is involved in all stages of PAP, contributing to early strategic recalibration process, as well as to spatial realignment. On vertical axis, the improving performance across the different stages of the task and the worsening accuracy within each task phase can be ascribed, respectively, to a learning process and to the task-related fatigue. PMID:27031676

  14. Tricapped trigonal prism in crystal chemistry of oxygen lanthanide compounds

    It is shown that in the course of fragmentation of extreme coordination (CP)-icosahedron- 1 9-atom fragment (broken piece) appears to be one of the stages. Minimal transformations turn this 9-atom fragment into a tricapped trigonal prism. The latter represents the only extreme CP, which is built by monodentate acidoanions for the elements of the whole rare earth series. Statistic analysis of Ln-O interatomic distances in tricapped trigonal prisms is performed

  15. Spatial compression impairs prism-adaptation in healthy individuals

    Roger Newport

    2013-01-01

    Neglect patients typically present with gross inattention to one side of space following damage to the contralateral hemisphere. While prism-adaptation is effective in ameliorating some neglect behaviours, the mechanisms involved and their relationship to neglect remain unclear. Recent studies have shown that conscious strategic control processes in prism-adaptation may be impaired in neglect patients, who are also reported to show extraordinarily long aftereffects compared to healthy partici...

  16. Random Prism: a noise-tolerant alternative to Random Forests

    Stahl, Frederic; Bramer, Max

    2014-01-01

    Ensemble learning can be used to increase the overall classification accuracy of a classifier by generating multiple base classifiers and combining their classification results. A frequently used family of base classifiers for ensemble learning are decision trees. However, alternative approaches can potentially be used, such as the Prism family of algorithms that also induces classification rules. Compared with decision trees, Prism algorithms generate modular classification rules that cannot...

  17. Wedge Prism for Direction Resolved Speckle Correlation Interferometry

    The role of a wedge prism for strain sign determination and enhancing the sensitivity for sub-fringe changes is emphasized. The design and incorporation aspects for in-plane sensitive interferometers have been described in detail. Some experimental results dealing with stress determination by laser annealing and speckle correlation interferometry are presented. The prism can also be applied to produce standardized carrier fringes in spatial phase shifting interferometry

  18. Actinide recycle utilizing oxide and metallic fuel in prism

    PRISM is a modular, pool-type sodium-cooled fast reactor employing innovative, passive features to provide an extremely high level of public safety. The PRISM reactor design can accommodate both oxide and metallic fuel forms. A comparison of core design and performance of these forms is made for various options. These options include low fuel cycle cost options, maximum transuranic burning options, and the addition of rare earth elements to the fuel mix. (authors)

  19. k-Odd mean labeling of prism

    B. Gayathri

    2015-03-01

    Full Text Available ‎A $(p‎,‎q$ graph $G$ is said to have a $k$-odd mean‎ ‎labeling $(k ge 1$ if there exists an injection $f‎ : ‎V‎ ‎to {0‎, ‎1‎, ‎2‎, ‎ldots‎, ‎2k‎ + ‎2q‎ - ‎3}$ such that the‎ ‎induced map $f^*$ defined on $E$ by $f^*(uv =‎ ‎leftlceil frac{f(u+f(v}{2}rightrceil$ is a‎ ‎bijection from $E$ to ${2k - ‎‎‎1‎, ‎2k‎ + ‎1‎, ‎2k‎ + ‎3‎, ‎ldots‎, ‎2‎ ‎k‎ + ‎2q‎ - ‎3}$‎. ‎A graph that admits $k$-odd mean‎ ‎labeling is called $k$-odd mean graph‎. ‎In this paper‎, ‎we investigate $k$-odd mean labeling of prism $C_m times‎ ‎P_n$‎.

  20. Negative Refraction experiments in Photonic Crystal prisms

    Vodo, Plarenta; Parimi, Patanjali. V.; Lu, Wentao. T.; di Gennaro, Emiliano; Sridhar, Srinivas

    2004-03-01

    We have experimentally demonstrated negative refraction in metallic photonic crystal (PC) prisms [1]. The refracted fields in the parallel plate waveguide (PPW) are measured by an automated dipole antenna, which scans the desired area, while the free space (FS) measurements, performed in a anechoic chamber, are measured by a rectangular X-band horn that swings in an arc in far field area. Both TE and TM excitation modes are used in FS experiments. Numerical calculations of the band structure and equi-frequency surface simulations are used to determine frequency regions of negative refraction of the triangular lattice PC. Angle of refraction determined by theoretical simulations and experimental results, are in exceptional good agreement, yielding the negative refraction index. FS and PPW refraction experimental results agree remarkably with simulations. 1. "Negative Refraction and Left-handed electromagnetism in Microwave Photonic Crystals", P.V Parimi, W.T Lu, P.Vodo J. Sokoloff and S.Sridhar, cond-mat/0306109 (2003)

  1. Single negative birefringence in stacked spoof plasmon metasurfaces by prism experiment.

    Beruete, M; Navarro-Cía, M; Falcone, F; Campillo, I; Sorolla, M

    2010-03-01

    We report negative and positive refraction in a prism made of stacked perforated thin surfaces for s and p polarization, respectively. By corrugating the subwavelength slits of a free-standing periodic arrangement, geometrically induced surface-plasmon-like currents are excited and transmission is allowed under s polarization (electric-field vector parallel to the slit). When several of those corrugated slit arrays are subwavelength stacked, the stack behaves as a negative effective index medium (because of double negativity) under s polarization, whereas it behaves as a positive effective index medium under p polarization. The birefringence has been confirmed by the usual wedge experiment in the millimeter-wave range. PMID:20195305

  2. An angular fluidic channel for prism-free surface-plasmon-assisted fluorescence capturing

    Nomura, Ken-Ichi; Gopinath, Subash C. B.; Lakshmipriya, Thangavel; Fukuda, Nobuko; Wang, Xiaomin; Fujimaki, Makoto

    2013-12-01

    Surface plasmon excitation provides stronger enhancement of the fluorescence intensity and better sensitivity than other sensing approaches but requires optimal positioning of a prism to ensure optimum output of the incident light. Here we describe a simple, highly sensitive optical sensing system combining surface plasmon excitation and fluorescence to address this limitation. V-shaped fluidic channels are employed to mimic the functions of a prism, sensing plate, and flow channel in a single setup. Superior performance is demonstrated for different biomolecular recognition reactions on a self-assembled monolayer, and the sensitivity reaches 100 fM for biotin-streptavidin interactions. Using an antibody as a probe, we demonstrate the detection of intact influenza viruses at 0.2 HA units ml-1 levels. The convenient sensing system developed here has the advantages of being prism-free and requiring less sample (1-2 μl), making this platform suitable for use in situations requiring low sample volumes.

  3. A 1-Diopter Vertical Prism Induces a Decrease of Head Rotation: A Pilot Investigation

    Matheron, Eric; Zandi, Ava; Wang, Danping; Kapoula, Zoï

    2016-01-01

    Clinical studies in non-specific chronic arthralgia and back pain seem to indicate an association between vertical heterophoria (VH – latent vertical retinal misalignment) and asymmetrical head rotation. Such clinical observations suggest a link between VH and head rotation, but this was never tested. The purpose of this study was to simulate a VH in healthy subjects and examine its influence on the amplitude of active head rotation during 3D motion capture in upright stance. Subjects were asked to rotate their head three times from the straight ahead position and then to the right, back to straight ahead, to the left, and back to the straight ahead again. Three randomized conditions were run: normal viewing, with a 1-diopter prism base down on the dominant eye, or the non-dominant eye. The most important finding is that the experimental VH whichever the eye with the prism induces a significant decrease in the mean angle of head rotation compared to the normal viewing condition. This decrease was significant for rotation to the left. We suggest that the prism-induced VH modifies the reference posture and thereby affects head rotation; further studies are needed to confirm this effect and to extend to other types of dynamic activities. PMID:27199886

  4. Advanced prism-grating-prism imaging spectrograph in online industrial applications

    Vaarala, Tapio; Aikio, Mauri; Keraenen, Heimo

    1997-08-01

    Imaging spectrographs have traditionally been utilized in aerial and remote sensing applications. A novel, compact and inexpensive imaging spectrograph developed by VTT Electronics is now available. It contains a multichannel fiber optic sensor head, a dispersive prism-grating-prism (PGP) component and digital CCD matrix camera capable of area integration. In rolled steel manufacturing, a protective oil film is applied on steel to resist corrosion while in transport and storage. The main problems in the oiling machine are film thickness control and jet failures. In this application, the spectrum of fluorescence of an oil film was measured simultaneously with parallel fibers. A relatively simple calibration and analysis procedure was used to calculate the oil film thickness. On-line color control for color reproduction is essential in both consumer and industrial products. The instrument was tested and analyzed for measuring differences in color by multivariate analysis of the spectra and by color space coordinate estimation. In general, a continuous spectrum is not absolute requirement. In these two examples, filter-based measurement would probably cost less thana PGP spectrograph solution. On the other hand, by measuring the spectrum and using an advanced signal processing algorithm one production version will cover all installations in both applications. In practice, only the fiber sensor mechanics need to be modified.

  5. Comparison of Perceptions of "Preparedness" of John Abbott C.E.G.E.P. Nursing Graduates: Prior to Graduation and After.

    Iton, Carmen; Sabiston, Judy

    A study of John Abbott College's nursing graduates was conducted to determine how well prepared for their professional responsibilities the graduates saw themselves just prior to graduation and later after working in the nursing field. A sample of 98 nursing students who graduated between 1986 and 1988 was surveyed, with 93% responding to the…

  6. Reverse time migration of prism waves for salt flank delineation

    Dai, Wei

    2013-09-22

    In this paper, we present a new reverse time migration method for imaging salt flanks with prism wave reflections. It consists of four steps: (1) migrating the seismic data with conventional RTM to give the RTM image; (2) using the RTM image as a reflectivity model to simulate source-side reflections with the Born approximation; (3) zero-lag correlation of the source-side reflection wavefields and receiver-side wavefields to produce the prism wave migration image; and (4) repeating steps 2 and 3 for the receiver-side reflections. An advantage of this method is that there is no need to pick the horizontal reflectors prior to migration of the prism waves. It also separately images the vertical structures at a different step to reduce crosstalk interference. The disadvantage of prism wave migration algorithm is that its computational cost is twice that of conventional RTM. The empirical results with a salt model suggest that prism wave migration can be an effective method for salt flank delineation in the absence of diving waves.

  7. Multiple surface plasmon waves in [prism/Ag/SiO2 helical thin film] Kretschmann configuration

    Two surface plasmon resonance dips in reflectance angular spectrum for a p-polarized incident beam of a [prism/Ag/SiO2 helical thin film] Kretschmann configuration are measured and compared with simulations. The simulation also shows that the angular positions of resonances due to surface plasmon waves in reflectance spectrum are sensitive to the variation of principal refractive indices of helical films. It indicates that multiple surface plasmon waves at the [Ag/SiO2 helical thin film] interface is more attractive than the traditional method of producing only one surface plasmon wave for chemical- and bio-sensing applications.

  8. Refractive index gradient measurement across the thickness of a dielectric film by the prism coupling method

    A method is proposed for measuring the refractive index gradient n(z) in nonuniformly thick dielectric films. The method is based on the excitation of waveguide modes in a film using the prism coupling technique and on the calculation of n(z) and film thickness Hf with the help of the angular positions of the TE or TM modes. The method can be used for an arbitrary shape of the index modulation over the film thickness in the limit of a small gradient [Δ n(z)/n(z) || 1]. (laser applications and other topics in quantum electronics)

  9. Nuclear medicine gamma camera system PRISM-XP series

    Recently, SPECT gamma camera systems have become important in RI imaging of the brain and torso. The PRISM-XP series is a new SPECT system which employs multiple detectors, a fan beam collimator and a non-circular orbit for improved acquisition speed and sensitivity. For improved data processing, this machine uses a 64-bit CPU and a 3D graphics subsystem specially designed for image processing. The PRISM-XP series also includes 3-detector, 2-detector and 1-detector systems. The dual and single detector systems also have functions for whole-body imaging. In this article, the PRISM-XP series, which is commercialized by PICKER International Inc, Ohio, U.S.A., is presented. (author)

  10. Advanced hyperspectral video imaging system using Amici prism.

    Feng, Jiao; Fang, Xiaojing; Cao, Xun; Ma, Chenguang; Dai, Qionghai; Zhu, Hongbo; Wang, Yongjin

    2014-08-11

    In this paper, we propose an advanced hyperspectral video imaging system (AHVIS), which consists of an objective lens, an occlusion mask, a relay lens, an Amici prism and two cameras. An RGB camera is used for spatial reading and a gray scale camera is used for measuring the scene with spectral information. The objective lens collects more light energy from the observed scene and images the scene on an occlusion mask, which subsamples the image of the observed scene. Then, the subsampled image is sent to the gray scale camera through the relay lens and the Amici prism. The Amici prism that is used to realize spectral dispersion along the optical path reduces optical distortions and offers direct view of the scene. The main advantages of the proposed system are improved light throughput and less optical distortion. Furthermore, the presented configuration is more compact, robust and practicable. PMID:25321019

  11. Birefringent neutron prisms for spin echo scattering angle measurement

    Pynn, Roger, E-mail: rpynn@indiana.ed [Indiana University, Bloomington, IN (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Fitzsimmons, M.R. [Los Alamos National Laboratory, Los Alamos, NM (United States); Lee, W.T. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Stonaha, P.; Shah, V.R.; Washington, A.L. [Indiana University, Bloomington, IN (United States); Kirby, B.J.; Majkrzak, C.F.; Maranville, B.B. [National Institute of Standards and Technology (United States)

    2009-09-01

    In the first decade of the 19th century, an English chemist, William Wollaston, invented an arrangement of birefringent prisms that splits a beam of light into two spatially separated beams with orthogonal polarizations. We have constructed similar devices for neutrons using triangular cross-section solenoids and employed them for Spin Echo Scattering Angle Measurement (SESAME). A key difference between birefringent neutron prisms and their optical analogues is that it is hard to embed the former in a medium which has absolutely no birefringence because this implies the removal of all magnetic fields. We have overcome this problem by using the symmetry properties of the Wollaston neutron prisms and of the overall spin echo arrangement. These symmetries cause a cancellation of Larmor phase aberrations and provide robust coding of neutron scattering angles with simple equipment.

  12. Transmission and Distribution of Optical Field in Prism Coupler

    Transmission and distribution characteristics of optical field in prism coupler are studies, and the phase matching function of prism coupler is deduced based on coupled wave theory. It is shown that the stable light field distribution and mode pattern are determined by its own geometric and dielectric parameters, but have nothing to do with the categories of incident light sources. It is also found that the coupling effect would generate between waveguides through evanescent field. Our numerical simulation is based on the finite difference time domain method with perfectly matched layer absorbing boundary condition. The simulation program is compiled in MATLAB. The simulation results are analyzed carefully.

  13. Temperature Influence on Divergence Angles of Quartz Crystal Wollaston Prism

    We propose a structural angle and main refractive indices as two key factors to understand the temperature influence on the divergence angles of the Wollaston prism. The temperature influence on the divergence angles of quartz crystal Wollaston prism is studied theoretically The results show that divergence angles decrease with increasing temperature, while the divergence angle of e-light decrease more quickly than that of o-light. The testing system is established to verify the above results, and the experimental results are in agreement well with the theoretical analysis. (fundamental areas of phenomenology (including applications))

  14. Assessment of PRISM responses to loss of flow events

    The Nuclear Regulatory Commission (NRC), with Brookhaven National Laboratory providing technical support, is continuing a preapplication review of the 471 MWt, Advanced Liquid Metal Reactor (ALMR), PRISM by General Electric. The revised design has been evaluated using the SSC code, for a series of loss of flow events (LOF) with and without Gas Expansion Modules (GEMs). These devices have a net worth of 69 cents and have reduced the seriousness of the LOF in PRISM. However, it was found that the extremely low probability case of an instantaneous loss of 4 EM pumps without scram could lead to sodium boiling even with the GEMs. (author)

  15. Prism refractive index measurement at INRiM

    A simple method to measure the refractive index of a glass prism with very low uncertainty was developed at INRiM. The method is a modification of the classical minimum deviation method. A brief description of the methods used to measure the vertex angles of the prism and the angle of minimum deviation is reported together with the uncertainty evaluation. The technique is going to be validated by a comparison between INRiM and two other laboratories. A relative standard uncertainty better than 1 ppm has been obtained

  16. Quartz-Enhanced Photoacoustic Spectroscopy with Right-Angle Prism

    Yongning Liu; Jun Chang; Jie Lian; Zhaojun Liu; Qiang Wang; Zengguang Qin

    2016-01-01

    A right-angle prism was used to enhance the acoustic signal of a quartz-enhanced photoacoustic spectroscopy (QEPAS) system. The incident laser beam was parallelly inverted by the right-angle prism and passed through the gap between two tuning fork prongs again to produce another acoustic excitation. Correspondingly, two pairs of rigid metal tubes were used as acoustic resonators with resonance enhancement factors of 16 and 12, respectively. The QEPAS signal was enhanced by a factor of 22.4 co...

  17. Intricacies of Feedback in Computer-based Prism Adaptation Therapy

    Wilms, Inge Linda; Rytter, Hana Malá

    Prism Adaptation Therapy (PAT) is an intervention method for treatment of attentional disorders, such as neglect e.g. 1,2. The method involves repeated pointing at specified targets with or without prism glasses using a specifically designed wooden box. The aim of this study was to ascertain...... direct feedback (physical finger) on pointing precision. Attempts to provide feedback indirectly via icons on the computer screen fail to create the aftereffects observed in the original PAT. The findings have direct implications for future implementations of computer-based methods in treatment of...

  18. Cerebellar inactivation impairs memory of learned prism gaze-reach calibrations

    Norris, Scott A.; Hathaway, Emily N.; Taylor, Jordan A.; Thach, W. Thomas

    2011-01-01

    Three monkeys performed a visually guided reach-touch task with and without laterally displacing prisms. The prisms offset the normally aligned gaze/reach and subsequent touch. Naive monkeys showed adaptation, such that on repeated prism trials the gaze-reach angle widened and touches hit nearer the target. On the first subsequent no-prism trial the monkeys exhibited an aftereffect, such that the widened gaze-reach angle persisted and touches missed the target in the direction opposite that o...

  19. A high throughput (>90%), large compensation range, single-prism femtosecond pulse compressor

    Kong, Lingjie; Cui, Meng

    2013-01-01

    We demonstrate a high throughput, large compensation range, single-prism femtosecond pulse compressor, using a single prism and two roof mirrors. The compressor has zero angular dispersion, zero spatial dispersion, zero pulse-front tilt, and unity magnification. The high efficiency is achieved by adopting two roof mirrors as the retroreflectors. We experimentally achieved ~ -14500 fs2 group delay dispersion (GDD) with 30 cm of prism tip-roof mirror prism separation, and ~90.7% system throughp...

  20. Cardiac rate detection method based on the beam splitter prism

    Yang, Lei; Liu, Xiaohua; Liu, Ming; Zhao, Yuejin; Dong, Liquan; Zhao, Ruirui; Jin, Xiaoli; Zhao, Jingsheng

    2013-09-01

    A new cardiac rate measurement method is proposed. Through the beam splitter prism, the common-path optical system of transmitting and receiving signals is achieved. By the focusing effect of the lens, the small amplitude motion artifact is inhibited and the signal-to-noise is improved. The cardiac rate is obtained based on the PhotoPlethysmoGraphy (PPG). We use LED as the light source and use photoelectric diode as the receiving tube. The LED and the photoelectric diode are on the different sides of the beam splitter prism and they form the optical system. The signal processing and display unit is composed by the signal processing circuit, data acquisition device and computer. The light emitted by the modulated LED is collimated by the lens and irradiates the measurement target through the beam splitter prism. The light reflected by the target is focused on the receiving tube through the beam splitter prism and another lens. The signal received by the photoelectric diode is processed by the analog circuit and obtained by the data acquisition device. Through the filtering and Fast Fourier Transform, the cardiac rate is achieved. We get the real time cardiac rate by the moving average method. We experiment with 30 volunteers, containing different genders and different ages. We compare the signals captured by this method to a conventional PPG signal captured concurrently from a finger. The results of the experiments are all relatively agreeable and the biggest deviation value is about 2bmp.

  1. The Pacific Oaks College's Prism Principles Professional Development Approach

    Beyer, Kalani

    2012-01-01

    In a struggling atmosphere for education, one college is optimistic about the future by offering school districts its PRISM Principles professional development as a means to ensure that "no child is left behind." Pacific Oaks College & Children's School is known for its premiere programs in early childhood education, human…

  2. Portable Remote Imaging Spectrometer (PRISM): Laboratory and Field Calibration

    Mouroulis, Pantazis; Van Gorp, Byron; Green, Robert O.; Eastwood, Michael; Boardman, Joseph; Richardson, Brandon S.; Rodriguez, Jose I.; Urquiza, Eugenio; Franklin, Brian D.; Gao, Bo-Cai

    2012-01-01

    We report the characteristics of the Portable Remote Imaging Spectrometer, an airborne sensor specifically designed for the challenges of coastal ocean research. PRISM has high signal to noise ratio and uniformity, as well as low polarization sensitivity. Acquisition of high quality data has been demonstrated with the first engineering flight.

  3. Programmable agile beam steering based on a liquid crystal prism

    To meet the application need for agile precision beam steering, a novel liquid crystal prism device with a simple structure, convenient control, low cost and applicable performance is presented, and analysed theoretically and experimentally. The relationships between the optical path and the thickness of the liquid crystal cell under different voltages are investigated quantitatively by using a theoretical model. Analysis results show that the optical path profile of the liquid crystal prism has a quasi-linear slope and the standard deviation of the linear slope is less than 16 nm. The slope ratio can be changed by a voltage, which achieves the programmable beam steering and control. Practical liquid crystal prism devices are fabricated. Their deflection angles and wavefront profiles with different voltages are experimentally tested. The results are in good agreement with the simulated results. The results imply that the agile beam steering in a scope of 100 μrad with a micro-rad resolution is substantiated in the device. The two-dimensional beam steering is also achieved by cascading two liquid crystal prism devices. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  4. First Observation of Neutron Deflections by Single Crystal Prisms

    For a monochromatic neutron beam incident on a single crystal prism, we derived analytic expressions for variations of the deflection δcr and transmitted fraction IO of forward diffracted neutrons, with the incidence angle θ. In the vicinity of a Bragg reflection, δcr deviates sharply from the deflection δam for an equivalent amorphous prism, reaching opposite extrema at either end of the total reflectivity domain and exhibits a 3 orders of magnitude greater sensitivity to θ than δam. We have experimentally observed the variation of δcr and IO across a Bragg reflection for single crystal silicon prisms of various apex angles in several asymmetric Bragg configurations. The observed δcr deviates from δam by upto 27% with sensitivities |dδcr/dθ| upto 0.43 arcsec/arcsec. The results are in harmony with theory. This observation has led to the design of a super-collimator Bragg prism producing neutron beams with sub-arcsecond angular widths.

  5. Astigmatism and coma-free prism dye ring laser

    The characteristics of two prism ring lasers for cw operation have been experimentally studied. With improved compensation for aberrations due to astigmatism and coma, cw ring lasers operated in the traveling-wave mode provide high output efficiency, stable narrow bandwidth in multimode and single-mode operation, and a broad tuning range

  6. THz Photonic Band-Gap Prisms Fabricated by Fiber Drawing

    Busch, Stefan F.; Xu, Lipeng; Stecher, Matthias;

    2012-01-01

    We suggest a novel form of polymeric based 3D photonic crystal prisms for THz frequencies which could be fabricated using a standard fiber drawing technique. The structures are modeled and designed using a finite element analyzing technique. Using this simulation software we theoretically study...... their performance....

  7. The demagnetizing field of a non-uniform rectangular prism

    Smith, Anders; Nielsen, Kaspar Kirstein; Christensen, Dennis;

    2010-01-01

    The effect of demagnetization on the magnetic properties of a rectangular ferromagnetic prism under non-uniform conditions is investigated. A numerical model for solving the spatially varying internal magnetic field is developed, validated and applied to relevant cases. The demagnetizing field is......-uniformity of the internal field, especially for non-constant temperature distributions and composite magnetic materials....

  8. A decomposition theorem for binary matroids with no prism minor

    Kingan, Sandra

    2012-01-01

    The prism graph is the dual of the complete graph on five vertices with an edge deleted, $K_5\\backslash e$. In this paper we determine the class of binary matroids with no prism minor. The motivation for this problem is the 1963 result by Dirac where he identified the simple 3-connected graphs with no minor isomorphic to the prism graph. We prove that besides Dirac's infinite families of graphs and four infinite families of non-regular matroids determined by Oxley, there are only three possibilities for a matroid in this class: it is isomorphic to the dual of the generalized parallel connection of $F_7$ with itself across a triangle with an element of the triangle deleted; it's rank is bounded by 5; or it admits a non-minimal exact 3-separation induced by the 3-separation in $P_9$. Since the prism graph has rank 5, the class has to contain the binary projective geometries of rank 3 and 4, $F_7$ and $PG(3, 2)$, respectively. We show that there is just one rank 5 extremal matroid in the class. It has 17 element...

  9. Coxeter Decompositions of Bounded Hyperbolic Pyramids and Triangular Prisms

    Felikson, A.

    2002-01-01

    Coxeter decompositions of hyperbolic simplices where studied in math.MG/0212010 and math.MG/0210067. In this paper we use the methods of these works to classify Coxeter decompositions of bounded convex pyramids and triangular prisms in the hyperbolic space H^3.

  10. Electrowetting-Controlled Dual Liquid Prism for Adaptive Beam Steering

    Cheng, Jiangtao

    2015-03-01

    The use of concentrating photovoltaic (CPV) technology has been the most promising method of harvesting solar radiation. These CPV systems often require motor-driven tracking devices to steer the sun's beams onto solar cells. The cost of maintaining these tracking systems is the primary inhibitor for widespread application. We aim to overcome the need for mechanical trackers through the use of an electrowetting-driven solar tracking (EWST) system. The electrowetting-driven solar tracking system consists of an array of novel electrowetting-controlled dual liquid prisms, which are filled with immiscible fluids that have large differences in refractive indices. The naturally formed meniscus between the fluids can function as a dynamic optical prism. Via the full-range modulation of the liquid prisms, incident sunlight can be adaptively tracked, steered, and focused onto CPV cells through a fixed optical condenser. Furthermore, unlike the conventional and cumbersome motor-driven tracking systems used today, the liquid prism system would be suitable for rooftop applications. The results of this project reveal that the EWST system has the potential to generate ~ 70% more green energy at 50% of the conventional capital cost.

  11. Prism adaptation contrasts perceptual habituation for repetitive somatosensory stimuli.

    Torta, D M; Tatu, M K; Cotroneo, D; Alamia, A; Folegatti, A; Trojan, J

    2016-03-01

    Prism adaptation (PA) is a non-invasive procedure that requires performing a visuo-motor pointing task while wearing prism goggles inducing a visual displacement of the pointed target. This procedure involves a reorganization of sensorimotor coordination, and induces long-lasting effects on numerous higher-order cognitive functions in healthy volunteers and neglect patients. Prismatic displacement (PD) of the visual field can be induced when prisms are worn but no sensorimotor task is required. In this case, it is unlikely that any subsequent reorganization takes place. The effects of PD are short-lived in the sense that they last as long as prisms are worn. In this study we aimed, to the best of our knowledge for the first time, at investigating whether PA and PD induce changes in the perception of intensity of nociceptive and non- nociceptive somatosensory stimuli. We induced, in healthy volunteers, PD (experiment 1), or PA (experiment 2) and asked participants to rate the intensity of the stimuli applied to the hand undergoing the visuo-proprioceptive conflict (experiment 1) or adaptation (experiment 2). Our results indicate that: 1) the visuo-proprioceptive conflict induced by PD does not reduce the perceived intensity of the stimuli, 2) PA prevents perceptual habituation for both nociceptive and non-nociceptive somatosensory stimuli. Moreover, to investigate the possible underlying mechanisms of the effects of PA we conducted a third experiment in which stimuli were applied both at the adapted and the non-adapted hand. In line with the results of experiment 2, we found that perceptual habituation was prevented for stimuli applied onto the adapted hand. Moreover, we observed the same finding for stimuli applied onto the non-adapted hand. This result suggests that the detention of habituation is not merely driven by changes in spatial attention allocation. Taken together, these data indicate that prisms can affect the perceived intensity of somatosensory stimuli

  12. Sediment compaction and fluid migration in the Makran Accretionary Prism

    Minshull, Tim; White, Robert

    1989-06-01

    The Makran continental margin in the Gulf of Oman forms the seaward extremity of an accretionary sediment prism which extends several hundred kilometers inland. A recently acquired multichannel seismic reflection profile shot across the margin imaged the structure of the prism in greater detail than was previously possible and allowed us to investigate the relationship between deformation and pore fluid motion in the region. Velocity analyses of the common midpoint gathers reveal a marked change in velocity structure at the toe of the accretionary wedge, as seen in previous sonobuoy wide-angle data. Accreted sediments show significantly higher vertical velocity gradients than those of sediments entering the prism; this change is interpreted as due to porosity reduction as pore fluids are squeezed out of the compacting sediment. A prominent "bottom simulating reflector" appears 500-800 m beneath the sea bed. Several lines of evidence suggest that this reflector represents the base of a gas hydrate zone underlain by widespread free gas, which may be exsolved from pore water migrating from deep within the sediment pile up permeable fault planes imaged in the profile. The hydrate reflector appears to shallow in the region of some faults, suggesting a temperature anomaly due to the presence of warm pore fluids. A heat flow profile derived from the depth of the hydrate reflector does not show the expected landward decrease as the sediment pile thickens. Simple thermal modeling suggests that advective heat flow within the prism may explain this anomaly. The inferred presence of overpressured pore fluids in the Makran suggests that accreted sediments have a low permeability. The seismic evidence suggests a two-stage compaction process, with rapid initial dewatering through intergranular permeability as sediment enters the prism followed by a buildup of pore pressure as the permeability decreases and fluid migration is restricted to fault zones.

  13. Efficient Quantification of HIV-1 in Heparin Plasma Spiked with Cultured HIV-1 by the Roche Cobas TaqMan and Abbott RealTime HIV-1 Tests

    Jagodzinski, Linda L; Weston, Holly R.; Liu, Ying; O'Connell, Robert J.; Peel, Sheila A

    2012-01-01

    The current automated real-time HIV-1 viral load assays, the Roche Cobas AmpliPrep/Cobas TaqMan test and the Abbott RealTime test, are FDA cleared for use with EDTA plasma. We show that both real-time reverse transcription-PCR (RT-PCR) tests reliably quantify HIV-1 RNA in heparin plasma specimens spiked with HIV-1 isolate MN.

  14. Abbott RealTime HIV-1 m2000rt viral load testing: Manual extraction versus the automated m2000sp extraction

    Scott, Lesley E.; Crump, John A.; Msuya, Emma; Morrissey, Anne B.; Venter, Willem F.; Stevens, Wendy S.

    2010-01-01

    The Abbott RealTime HIV-1 assay is a real-time nucleic acid amplification assay available for HIV-1 viral load quantitation. The assay has a platform for automated extraction of viral RNA from plasma or dried blood spot samples, and an amplification platform with real time fluorescent detection. Overall, this study found no clinically relevant differences in viral load, if samples were extracted manually.

  15. Sensitivity and specificity of the GAMMACOAT-M CEA-RIA from Travenol-Genentech Diagnostics compared to the ABBOTT CEA-RIA monoclonal

    A new monoclonal radioimmunoassay from Travenol-Genentech Diagnostics was investigated with respect to its sensitivity and specificity and compared to the established monoclonal antibody assay of ABBOTT. Both tests revealed increased CEA plasma values in healthy smokers, whereby the elevation was dependent on the number of cigarettes smoked per day. The sensitivities as well as the cut-off levels for CEA at 90% specificity were coincident in both tests. (orig.)

  16. Study on the conditions for stabilizing trigonal-prism coordination compounds

    A new calculating method has been proposed for the elongation and twist of trigonal-prism. The calculations show that the calculated and determined values of the bite for bidentate trigonal prism complexes are similar and that rigidity of the bite favors the stabilization of the trigonal prism configuration. The structural characteristics of the bidentate ligands and central atoms are further discussed based on the structural data of trigonal-prism compounds. The discussion provides a guide for the preparation of new trigonal-prism labelled compounds

  17. Postural Stability Changes during Large Vertical Diplopia Induced by Prism Wear in Normal Subjects

    Matsuo,Toshihiko; Yamasaki,Hanako; Yasuhara,Hirotaka; Hasebe, Kayoko

    2013-01-01

    To test the effect of double vision on postural stability, we measured postural stability by electric stabilometry before prism-wearing and immediately, 15, 30, and 60min after continuous prism-wearing with 6 prism diopters in total (a 3-prism-diopter prism placed with the base up in front of one eye and with the base down in front of the other eye) in 20 normal adult individuals with their eyes open or closed. Changes in stabilometric parameters in the time course of 60min were analyzed stat...

  18. PREDICTION OF OUTCOME OF PAEDIATRIC PATIENTS BY VALIDATING PRISM III SCORING WITHIN 12 HOURS AND PRISM III AT 72-84 HOURS AFTER INITIATION OF THE TREATMENT

    Sonica

    2014-01-01

    `BACKGROUND: One of the scoring systems in Pediatric Intensive Care is the PRISM III (PAEDITRIC RISK OF MORTALITY III) which is an updated version of PRISM. Study was done at time point 72 hrs of initiation of therapy as well in a view that it will better prognosticate the outcome. AIMS: 1. To find out PRISM III within 1st 12 hours of admission and at 72-84 hours of admission, 2. To evaluate any correlation between PRISM III and mortality, 4.To find out correlation between...

  19. Nano-accuracy measurements and the surface profiler by use of Monolithic Hollow Penta-Prism for precision mirror testing

    We developed a Monolithic Hollow Penta-Prism Long Trace Profiler-NOM (MHPP-LTP-NOM) to attain nano-accuracy in testing plane- and near-plane-mirrors. A new developed Monolithic Hollow Penta-Prism (MHPP) combined with the advantages of PPLTP and autocollimator ELCOMAT of the Nano-Optic-Measuring Machine (NOM) is used to enhance the accuracy and stability of our measurements. Our precise system-alignment method by using a newly developed CCD position-monitor system (PMS) assured significant thermal stability and, along with our optimized noise-reduction analytic method, ensured nano-accuracy measurements. Herein we report our tests results; all errors are about 60 nrad rms or less in tests of plane- and near-plane- mirrors

  20. A beam-displacement prism based, three band stellar photo-polarimeter

    Raveendran, A V; Muneer, S; Mekkaden, M V; Jayavel, N; Somashekar, M R; Sagayanathan, K; Ramamoorthy, S; Rosario, M J; Jayakumar, K

    2015-01-01

    A new astronomical photo-polarimeter that can measure linear polarization of point sources simultaneously in three spectral bands was designed and built in Indian Institute of Astrophysics. The polarimeter has a Calcite beam-displacement prism as the analyzer. The ordinary and extra-ordinary emerging beams in each spectral band are quasi-simultaneously detected by the same photomultiplier by using a high speed rotating chopper. The effective chopping frequency can be set to as high as 200 Hz. A rotating superachromatic Pancharatnam halfwave plate is used to modulate the light incident on the analyzer. The spectral bands are isolated using appropriate dichroic and glass filters. A detailed analysis shows that the reduction of 50% in the efficiency of the polarimeter because of the fact that the intensities of the two beams are measured alternately is partly compensated by the reduced time to be spent on the observation of the sky background. The position angle of polarization produced by the Glan-Taylor prism ...

  1. Transient safety performance of the PRISM innovative liquid metal reactor

    The PRISM sodium-cooled reactor concept utilizes passive safety characteristics and modularity to increase performance margins, improve licensability, reduce owner's risk and reduce costs. The relatively small size of each reactor module (471 MWt) facilitates the use of passive self-shutdown and shutdown heat removal features, which permit design simplification and reduction of safety-related systems. Key to the transient performance is the inherent negative reactivity feedback characteristics of the core design resulting from the use of metal (U-Pu-Zr) swing, and very low control rod runout worth. Selected beyond design basis events relying only on these core design features are analyzed and the design margins summarized to demonstrate the advancement in reactor safety achieved with the PRISM design concept

  2. Hyperbolic prisms and foams in Hele-Shaw cells

    The propagation of light in foams creates patterns which are generated due to the reflection and refraction of light. One of these patterns is observed by the formation of multiple mirror images inside liquid bridges in a layer of bubbles in a Hele-Shaw cell. We are presenting the existence of these patterns in foams and their relation with hyperbolic geometry and Sierpinski gaskets using the Poincare disk model. The images obtained from the experiment in foams are compared to the case of hyperbolic optical elements. -- Highlights: → The chaotic scattering of light in foams generating deltoid patterns is based on hyperbolic geometry. → The deltoid patterns are obtained through the Plateau borders in a Hele-Shaw cell. → The Plateau borders act like hyperbolic prism. → Some effects of the refraction and reflection of the light rays were studied using a hyperbolic prism.

  3. Extremely simple single-prism ultrashort- pulse compressor.

    Akturk, Selcuk; Gu, Xun; Kimmel, Mark; Trebino, Rick

    2006-10-16

    We have designed and demonstrated a very simple and compact ultrashort-pulse compressor using a single prism and a corner-cube. Our design is significantly easier to align and tune compared with previous designs. Angle-tuning the prism wavelength-tunes, and translating the corner cube varies the group-delay dispersion over a wide range. When tuned, the device automatically maintains zero angular dispersion, zero pulse-front tilt, zero spatial chirp, and unity magnification. The device can easily be built so that its output beam remains collinear with the input beam, and when the input beam or pulse compressor moves, the input and output beams remain collinear. PMID:19529405

  4. Prism-coupled light emission from tunnel junctions

    Ushioda, S.; Rutledge, J. E.; Pierce, R. M.

    1985-01-01

    Completely p-polarized light emission has been observed from smooth Al-AlO(x)-Au tunnel junctions placed on a prism coupler. The angle and polarization dependence demonstrate unambiguously that the emitted light is radiated by the fast-mode surface plasmon polariton. The emission spectra suggest that the dominant process for the excitation of the fast mode is through conversion of the slow mode to the fast mode mediated by residual roughness on the junction surface.

  5. Advanced SFR Concept Based on PRISM and KALIMER

    The Sodium-cooled Fast Reactor has been recognized as one of the promising nuclear options for generating electricity with efficient uranium resource utilization and reduction of radioactive wastes from nuclear power plants. This paper compares design features, identifies differences between KALIMER-600 and S-PRISM sodium-cooled reactors, and derives R and D requirements in order to explore the possibility of developing a novel SFR concept. (author)

  6. Prism adaptation does not alter configural processing of faces

    Bultitude, Janet H.; Downing, Paul E.; Robert D. Rafal

    2013-01-01

    Patients with hemispatial neglect (‘neglect’) following a brain lesion show difficulty responding or orienting to objects and events on the left side of space. Substantial evidence supports the use of a sensorimotor training technique called prism adaptation as a treatment for neglect. Reaching for visual targets viewed through prismatic lenses that induce a rightward shift in the visual image results in a leftward recalibration of reaching movements that is accompanied by a reduction of symp...

  7. Stereovision Imaging in Smart Mobile Phone Using Add on Prisms

    Bar-Magen Numhauser, Jonathan; Zalevsky, Zeev

    2014-03-01

    In this work we present the use of a prism-based add on component installed on top of a smart phone to achieve stereovision capabilities using iPhone mobile operating system. Through these components and the combination of the appropriate application programming interface and mathematical algorithms the obtained results will permit the analysis of possible enhancements for new uses to such system, in a variety of areas including medicine and communications.

  8. Prism therapy and visual rehabilitation in homonymous visual field loss.

    O'Neill, Evelyn C

    2011-02-01

    Homonymous visual field defects (HVFD) are common and frequently occur after cerebrovascular accidents. They significantly impair visual function and cause disability particularly with regard to visual exploration. The purpose of this study was to assess a novel interventional treatment of monocular prism therapy on visual functioning in patients with HVFD of varied etiology using vision targeted, health-related quality of life (QOL) questionnaires. Our secondary aim was to confirm monocular and binocular visual field expansion pre- and posttreatment.

  9. Prism therapy and visual rehabilitation in homonymous visual field loss.

    O'Neill, Evelyn C

    2012-02-01

    PURPOSE: Homonymous visual field defects (HVFD) are common and frequently occur after cerebrovascular accidents. They significantly impair visual function and cause disability particularly with regard to visual exploration. The purpose of this study was to assess a novel interventional treatment of monocular prism therapy on visual functioning in patients with HVFD of varied etiology using vision targeted, health-related quality of life (QOL) questionnaires. Our secondary aim was to confirm monocular and binocular visual field expansion pre- and posttreatment. METHODS: Twelve patients with acquired, documented HVFD were eligible to be included. All patients underwent specific vision-targeted, health-related QOL questionnaire and monocular and binocular Goldmann perimetry before commencing prism therapy. Patients were fitted with monocular prisms on the side of the HVFD with the base-in the direction of the field defect creating a peripheral optical exotropia and field expansion. After the treatment period, QOL questionnaires and perimetry were repeated. RESULTS: Twelve patients were included in the treatment group, 10 of whom were included in data analysis. Overall, there was significant improvement within multiple vision-related, QOL functioning parameters, specifically within the domains of general health (p < 0.01), general vision (p < 0.05), distance vision (p < 0.01), peripheral vision (p < 0.05), role difficulties (p < 0.05), dependency (p < 0.05), and social functioning (p < 0.05). Visual field expansion was shown when measured monocularly and binocularly during the study period in comparison with pretreatment baselines. CONCLUSIONS: Patients with HVFD demonstrate decreased QOL. Monocular sector prisms can improve the QOL and expand the visual field in these patients.

  10. Stereo Evaluation Of ALOS PRISM And IKONOS In Yemen

    Müller, Rupert; Schneider, Mathias; Radhadevi, P.V.; Reinartz, Peter; Schwonke, Friedhelm

    2009-01-01

    DLR's Remote Sensing Technology Institute has a long lasting experience in developing spaceborne stereo scanners (MEOSS, MOMS) and the corresponding photogrammetric software systems for stereo evaluation and orthorectification. It takes part in the ESA/JAXA-AO Program to evaluate the performance and potential of the three-line stereo scanner PRISM and the multispectral imaging sensor AVNIR-2 on-board the Japanese satellite ALOS as a principal investigator. The high geometric resolution of PRI...

  11. Performance analysis of the 840 MWt PRISM reference burner core

    The General Electric PRISM (Power Reactor, Innovative Small Module) is a modular, pool-type sodium-cooled fast reactor employing innovative, passive features to provide an extremely high level of public safety. A PRISM power block consists of two 840 MWt reactor modules, each with a vessel diameter of 9.15 m (30 ft), tied to a turbine generator and producing 622 MWe. A full-size plant consists of three power blocks producing 1866 MWe of electrical power. Two core configurations have been analyzed. The reference is a 'burner' core (conversion ratio of 0.8) and the alternative is a breakeven' core (plutonium consumption balanced by plutonium generation). The core nuclear designs are largely governed by passive safety and reactivity control issues. The key features employed to produce the desired passive safety characteristics are: a small core with a tight restraint system, the use of metallic U-Pu-Zr fuel, control rod withdrawal limiters (rod stops) and gas expansion modules (GEMs). A passive reactor vessel auxiliary cooling system (RVACS) assures safety-grade decay heat removal. This paper summarizes the operational and safety performance of the 840 MWt PRISM modular reactor, with emphasis on the reference burner core. (author)

  12. Controllable Sonar Lenses and Prisms Based on ERFs

    Bar-Cohen, Yoseph; Sherrit, Stewart; Chang, Zensheu; Bao, Xiaoqi; Paustian, Iris; Lopes, Joseph; Folds, Donald

    2004-01-01

    Sonar-beam-steering devices of the proposed type would contain no moving parts and would be considerably smaller and less power-hungry, relative to conventional multiple-beam sonar arrays. The proposed devices are under consideration for installation on future small autonomous underwater vehicles because the sizes and power demands of conventional multiple-beam arrays are excessive, and motors used in single-beam mechanically scanned systems are also not reliable. The proposed devices would include a variety of electrically controllable acoustic prisms, lenses, and prism/lens combinations both simple and compound. These devices would contain electrorheological fluids (ERFs) between electrodes. An ERF typically consists of dielectric particles floating in a dielectric fluid. When an electric field is applied to the fluid, the particles become grouped into fibrils aligned in rows, with a consequent increase in the viscosity of the fluid and a corresponding increase in the speed of sound in the fluid. The change in the speed of sound increases with an increase in the applied electric field. By thus varying the speed of sound, one varies the acoustic index of refraction, analogously to varying the index of refraction of an optical lens or prism. In the proposed acoustic devices, this effect would be exploited to control the angles of refraction of acoustic beams, thereby steering the beams and, in the case of lenses, controlling focal lengths.

  13. Prism: a new approach to radiotherapy planning software

    Purpose: We describe the capabilities and performance of Prism, an innovative new radiotherapy planning system with unusual features and design. The design and implementation strategies are intended to assure high quality and clinical acceptability. The features include Artificial Intelligence tools and special support for multileaf collimator (MLC) systems. The design provides unusual flexibility of operation and ease of expansion. Methods and Materials: We have implemented Prism, a three-dimensional (3D) radiotherapy treatment-planning system on standard commercial workstations with the widely available X window system. The design and implementation use ideas taken from recent software engineering research, for example, the use of behavioral entity-relationship modeling and the 'Mediator Method' instead of ad-hoc programming. The Prism system includes the usual features of a 3D planning system, including Beam's Eye View and the ability to simulate any treatment geometry possible with any standard radiotherapy accelerator. It includes a rule-based expert system for automated generation of the planning target volume as defined in ICRU Report 50. In addition, it provides special support for planning treatments with a multileaf collimator (MLC). We also implemented a Radiotherapy Treatment Planning Tools Foundation for Prism, so that we are able to use software tools from other institutions without any source code modification. Results: The Prism system has been in clinical operation at the University of Washington since July 1994 and has been installed at several other clinics. The system is run simultaneously by several users, each with their own workstation operating from a common networked database and software. In addition to the dosimetrists, the system is used by radiation oncologists to define tumor and target volumes and by radiation therapists to select treatment setups to load into a computer controlled accelerator. Conclusions: Experience with the

  14. Local Seismicity Recorded by ChilePEPPER: Implications for Dynamic Accretionary Prism Response and Long-term Prism Evolution

    de Moor, A.; Trehu, A. M.; Tryon, M. D.

    2015-12-01

    To investigate the dynamic response of the outer accretionary wedge updip from the patch of greatest slip during the Mw8.8 2010 Maule earthquake, 10 Ocean Bottom Seismometers (OBS) were deployed from May 2012 to March 2013 in a small array with an inter-instrument spacing of ~12 km . Nine instruments were recovered, with 4 recording data on 3 intermediate-band 3-component seismometers and a differential pressure gauge and 5 recording data from absolute pressure gauges. [note: All instruments were also equipped with a fluid flow meter sensitive to flow rates as low as 0.0001 cm/yr in or out of the sediments. However, no flow signal was detected.] Here we present hypocenters for 569 local events that have S-P times less than 17 seconds (i.e. within ~125 km of the array) using hand-picked arrival times and a 1D velocity model derived from a 2D seismic refraction profile through the region (Moscoso et al 2011, EPSL). We analyze the distribution of seismicity in the context of published slip models, ChilePEPPER high-resolution seismic reflection data, critical taper analysis done by Cubas et al 2013 (EPSL), and offshore gravity data. The data show distinct segmentation within the outer prism. The northern section of the study area is characterized by a lack of seismicity, accretion of nearly all incoming sediment and a prism at critical taper. In contrast, abundant seismicity, significant sediment underthrusting at the deformation front and a prism below critical taper angle characterize the southern part of the study area. Both coseismic slip and post-rupture local seismicity can be related to density anomalies within the upper plate as revealed by free air gravity data corrected for the effects of bathymetry and the subducting plate. [ChilePEPPER - Project Evaluating Prism Post-Earthquake Response

  15. A PROSPECTIVE COHORT STUDY FOR THE COMPARISON OF TWO PROGNOSTIC SCORES-PRISM 3 AND PIM 2 IN A PAEDIATRIC INTENSIVE CARE UNIT

    Raghavendra Bhupal

    2014-09-01

    Full Text Available BACKGROUND AND OBJECTIVES: Various prognostic scores are used to evaluate the outcome in the PICU. Among these scores PRISM (Pediatric Risk of Mortality and PIM (Pediatric Index of Mortality, are the most recent versions. The objectives of this study were to compare performance of PIM II and PRISM III scores at a general pediatric intensive care unit, relation between observed mortality and survival and predicted mortality and survival. METHODS: Present prospective cohort study was conducted at Pediatric Intensive Care Unit, KLES, Dr. Prabhakar Kore Hospital and Medical Research Centre, Belgaum during period of July-2009 to October-2009. Ethical clearance was obtained from Ethical and Research Committee of Jawaharlal Nehru Medical College, Belgaum. A total of 316 patients were enrolled out of 350 admissions during study period. Within first hour of admission PIM II was assessed and at 24 hours PRISM III score was assessed. Patients were followed up for outcome measured in form of survivors and non survivors. RESULTS: A total 316 patients were enrolled, 28 patients were excluded as their outcome was not known. Among the 288 patients 261 were survivors and 27 were non-survivors. Majority of survivors and non survivors were males but there was no statistical significant influence on outcome. The overall number of estimated mortality was 13.2 and 16.5 with PIM II and PRISM III respectively compared to observed mortality of 27. PIM II (x2=16.34; p<0.001 and PRISM III (x2=6.78; p=0.009 had poor calibration. PRISM III showed the better discrimination (ROC=0.892 followed by PIM II 0.871 (0.827 to 0.907. PIM II and PRISM III (0.850 to 0.925 revealed positive and significant correlation, with spearman's rank correlation (r= 0.318; p<0.0001. INTERPRETATION AND CONCLUSION: In this study PIM II and PRISM III under predicted mortality and also had poor calibration with good discrimination. Overall both scores exhibited good capacity to discriminate between

  16. 罗氏 Cobas e601与雅培 Architect i2000检测乙肝表面抗原的比较%Comparison of HBsAg Results between Roche Cobas e601 and Abbott Architect i2000 analysis systems

    孙彬; 李康; 吴纯; 郭奉洁; 白光亮; 董梅

    2014-01-01

    目的:比较罗氏电化学发光检测仪Cobas e601与雅培化学发光微粒子免疫分析仪Architect i2000检测乙肝表面抗原的结果。方法选取在雅培 i2000检测仪上检测乙肝表面抗原结果为有反应性,且定量结果小于250 IU/mL 的标本,同时在罗氏 e601进行检测,分析比较检测结果间的差别,并进行直线相关和回归分析。结果共检测46份临床标本,剔除1份两台仪器上检测结果反应性不符的标本外,其余结果具有很好的相关性。其中雅培检测值为0.05~1.00 IU/mL 的15份,两者的直线回归方程为Y =17.49X +0.843,相关系数 r=0.979;1.1~10.00 IU/mL 的15份,两者的直线回归方程为Y =15.72X +21.06,相关系数 r=0.952;11~250 IU/mL 的15份,两者的直线回归方程为Y =29.17X -129,相关系数 r=1.000。结论两种方法的检测结果具有很好的相关性,并可以通过公式进行相互换算。%Objective To compare the difference of the HBsAg detected results between the Roche cobas e601 electrochemilumi-nescence immunoassay instrument and the Abbott Architect i2000chemiluminescent microparticle immunoassay instrument.Methods The HBsAg positive specimens with the quantitation results of lower than 250IU/mL detected by the Abbott Architect i2000 were selected and simultaneously detected by the Roche cobas e601.The differences of detected results were compared and per-formed the linear correlation and analysis regression.Results 46 clinical specimens were detected.The detected results had best correlation between the two instruments by getting rid of 1 specimen with unconformable reactivity of detected results.15 speci-mens had the HBsAg detected result of 0.05-1.00 IU/mL by the Abbott Architect i2000,the linear regression equation was Y =17.49X+0.843(r=0.979);15 specimens had the HBsAg detected result of 1.1 -10.00 IU/mL IU/mL by the Abbott Architect i2000,the linear

  17. Experimental study on the flow regimes past a confined prism undergoing self-sustained oscillations

    Highlights: • A experimental study is presented on the flow regimes past a confined prism. • Flow is 3D and involves the self-sustained motion of the prism. • Different regimes are indentified as a function of two control parameters. • Control parameters are the Reynolds number and the density ratio. • The concept has potential industrial applications. - Abstract: An experimental study based on Particle Image Velocimetry (PIV) is presented with the objective of studying the flow regimes that appear in the flow past a confined prism undergoing self-sustained oscillations at low Reynolds numbers (Re). The square-section prism, placed inside a 3D square cross-section vertical channel with a confinement ratio of 1/2.5, was tethered to the channel walls and, therefore, it was allowed to move freely transverse to the incoming flow. Re (based on the prism cross-section height) was varied in the range from 100 to 700. Three different prism to fluid density ratios (m∗) were considered: 0.56, 0.70, and 0.91. These two parameters, Re and m∗, were used to map the results obtained. In particular, it was found that five different regimes appear: (1) steady prism with steady recirculation bubble, (2) steady prism with unsteady vortex shedding wake, (3) large amplitude low frequency oscillating prism with unsteady vortex shedding wake, (4) small amplitude high frequency oscillating prism with unsteady vortex shedding wake, and (5) irregular/chaotic motion of both the prism and the wake. The PIV results and associated numerical simulations were used to analyze the different prism and wake states

  18. Redshift estimation from low-resolution prism SEDs with an NGST MOS

    Teplitz, Harry I.; Malumuth, Eliot; Woodgate, Bruce E.; Moseley, S. Harvey; Gardner, Jonathan P.; Kimble, Randy A.; Bowers, Charles W.; Kutyrev, Alexander S.; Fettig, Rainer K.; Wesenberg, Richard P.; Mentzell, John E.

    2000-01-01

    We discuss the utility of a low resolution prism as a component of a Multi-Object Spectrometer for NASA's proposed Next Generation Space Telescope (NGST). Low resolution prism spectroscopy permits simultaneous observation of the 0.6-5micron wavelength regime at R~50. To such data we can apply the modern techniques in spectral energy distribution (SED) fitting to determine source redshifts, sometimes called ``photometric redshifts''. Low resolution prism observations of galaxy SED's provide a ...

  19. Synthesis and Photocatalytic Activity of Ag3PO4 Triangular Prism

    Pengyu Dong; Yan Hao; Peiyang Gao; Entian Cui; Qinfang Zhang

    2015-01-01

    Ag3PO4 triangular prism was synthesized by a facile chemical precipitation approach by simply adjusting external ultrasonic condition. The as-synthesized Ag3PO4 triangular prism was characterized by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectra, and ultraviolet-visible diffuse reflectance (UV-vis DRS) absorption spectra. The photocatalytic activity of Ag3PO4 triangular prism was evaluated by photodegradation of or...

  20. PriSM: a primer selection and matching tool for amplification and sequencing of viral genomes

    Yu, Qing; Ryan, Elizabeth M; Allen, Todd M.; Birren, Bruce W.; Henn, Matthew R.; Lennon, Niall J.

    2010-01-01

    Summary: PriSM is a set of algorithms designed to select and match degenerate primer pairs for the amplification of viral genomes. The design of panels of hundreds of primer pairs takes just hours using this program, compared with days using a manual approach. PriSM allows for rapid in silico optimization of primers for downstream applications such as sequencing. As a validation, PriSM was used to create an amplification primer panel for human immunodeficiency virus (HIV) Clade B.

  1. Left-Deviating Prism Adaptation in Left Neglect Patient: Reflexions on a Negative Result

    Jacques Luauté; Sophie Jacquin-Courtois; Jacinta O'Shea; Laure Christophe; Gilles Rode; Dominique Boisson; Yves Rossetti

    2012-01-01

    Adaptation to right-deviating prisms is a promising intervention for the rehabilitation of patients with left spatial neglect. In order to test the lateral specificity of prism adaptation on left neglect, the present study evaluated the effect of left-deviating prism on straight-ahead pointing movements and on several classical neuropsychological tests in a group of five right brain-damaged patients with left spatial neglect. A group of healthy subjects was also included for comparison purpos...

  2. Mortality Risk Prediction by Application of PRISM Scoring System in Pediatric Intensive Care Unit

    Mahdi Mohammadi; Afshin Fayyazi; Mohsen Raeisi; Noor Mohammad Noori; Ali Khajeh; Ghasem Miri-Aliabad

    2013-01-01

    Objective: The Pediatric Risk of Mortality (PRISM) score is one of the scores used by many pediatricians for prediction of the mortality risk in the pediatric intensive care unit (PICU). Herein, evaluate the efficacy of PRISM score in prediction of mortality rate in PICU.Methods: In this cohort study, 221 children admitted during an 18-month period to PICU, were enrolled. PRISM score and mortality risk were calculated. Follow up was noted as death or discharge. Results were analyzed by Kaplan...

  3. DYNAMIQUE DES PRISMES OROGÉNIQUES, LE RÔLE DES FLUIDES

    Deville, Eric

    2011-01-01

    The work presented is a dossier presented to anobyainaccreditation to supervise research (HDR). It concerns the role of fluids in orogenic prisms. The presentation is organized around three approaches: (1) an integrated approach to iconic sites: a mature accretionary prism (the prism of Barbados) and a chain collision (Western Alps), (2) a methodological approach, and (3) a thematic approach to study processes poorly understood and to discuss problems of structure and dynamics of convergent o...

  4. Erythropoiesis: Short Report: Translation of Analysis Results between Serum Ferritin Assays, Ferritin RIA AmershamTM and Abbott AxSYMTM Ferritin.

    Milman, NILS; Byg, KELD-ERIK; Juul-Jørgensen, BIRGIT; Weis Bentzon, MICHAEL

    1999-01-01

    The serum ferritin assays, Ferritin RIA Amersham(TM) and Abbott AxSYM(TM) Ferritin were compared in order to translate values from one assay to the other. Serum ferritin was analysed with both assays in 102 samples. Logarithmic transformation of the results was performed in order to stabilize the variance. The relationship between the untransformed values was most exactly expressed by a proportionality: AxSYM Ferritin = 0.873 * RIA Ferritin. Due to this proportionality, the numerical difference between the assays increases with the ferritin concentration, although the percentage difference between the assays remains constant. PMID:11399562

  5. BC-5500与Abbott CD-3700全自动血细胞分析仪性能的比较分析

    吴立兵; 李德奎

    2010-01-01

    @@ 深圳迈瑞公司和美国雅培公司采用不同的检测原理分别生产了BC-5500和Abbott CD-3700血细胞分析仪,为了解这2种血细胞分析仪检测结果的准确性、精密度和一致性,本组对二者的临床检测结果进行了分析、比较.结果报告如下.

  6. Development and Clinical Evaluation of a Recombinant-Antigen-Based Cytomegalovirus Immunoglobulin M Automated Immunoassay Using the Abbott AxSYM Analyzer

    Maine, G T; Stricker, R; Schuler, M.; Spesard, J.; Brojanac, S.; Iriarte, B.; Herwig, K.; Gramins, T.; Combs, B.; Wise, J.; Simmons, H.; Gram, T.; Lonze, J.; Ruzicki, D.; Byrne, B

    2000-01-01

    A new microparticle enzyme immunoassay (MEIA), the Cytomegalovirus (CMV) Immunoglobulin M (IgM) test, was developed on the Abbott AxSYM analyzer. This test uses recombinant CMV antigens derived from portions of four structural and nonstructural proteins of CMV: pUL32 (pp150), pUL44 (pp52), pUL83 (pp65), and pUL80a (pp38). A total of 1,608 specimens from random volunteer blood donors (n = 300), pregnant women (n = 1,118), transplant recipients (n = 6), and patients with various clinical condit...

  7. Group-delay Dispersion in Double-prism Pair and Limitation in Broadband Laser Pulses

    程昭; 赵卫

    2002-01-01

    A general expression of group-delay dispersion is obtained without any approximation for a pair of double prisms with an arbitrary apex angle. This expression also includes the change of dispersion resulting from change in insertion of the prism material into the beam by translating prism-pairs. The high-order dispersion can be calculated by means of this expression. The limitation for generation of negative group-delay dispersion by use of prism-pairs is presented for ultrashort laser pulses with broadband spectrum.

  8. Ray-optical negative refraction and pseudoscopic imaging with Dove-prism arrays

    Courtial, J.; Nelson, J

    2008-01-01

    A sheet consisting of an array of small, aligned Dove prisms can locally (on the scale of the width of the prisms) invert one component of the ray direction. A sandwich of two such Dove-prism sheets that inverts both transverse components of the ray direction is a ray-optical approximation to the interface between two media with refractive indices +n and –n. We demonstrate the simulated imaging properties of such a Dove-prism-sheet sandwich, including a demonstration of pseudoscopic imaging.

  9. PRISM -- A tool for modelling proton energy deposition in semiconductor materials

    This paper presents a description of, and test results from, a new PC based software simulation tool PRISM (Protons in Semiconductor Materials). The model describes proton energy deposition in complex 3D sensitive volumes of semiconductor materials. PRISM is suitable for simulating energy deposition in surface-barrier detectors and semiconductor memory devices, the latter being susceptible to Single-Event Upset (SEU) and Multiple-Bit Upset (MBU). The design methodology on which PRISM is based, together with the techniques used to simulate ion transport and energy deposition, are described. Preliminary test results used to analyze the PRISM model are presented

  10. A high throughput (>90%), large compensation range, single-prism femtosecond pulse compressor

    Kong, Lingjie

    2013-01-01

    We demonstrate a high throughput, large compensation range, single-prism femtosecond pulse compressor, using a single prism and two roof mirrors. The compressor has zero angular dispersion, zero spatial dispersion, zero pulse-front tilt, and unity magnification. The high efficiency is achieved by adopting two roof mirrors as the retroreflectors. We experimentally achieved ~ -14500 fs2 group delay dispersion (GDD) with 30 cm of prism tip-roof mirror prism separation, and ~90.7% system throughput with the current implementation. With better components, the throughput can be even higher.

  11. The spectral characteristics of the splitting angle for double Wollaston prism

    WU Wen-di; WANG Zhao-bing; WANG Hai-long; ZHANG Shan

    2009-01-01

    The spectral characteristics of the splitting angle and its asymmetry for double-Wollaston prism are analyzed theoretically. With the increase of the prism structure angle, the splitting angle of the double Wollaston prism and its asymmetry increase. However, the splitting angle decreases with the increase of the wavelength of incident light. The influence of the incident light wavelength on the splitting angle in the ultraviolet wave band is much greater than that in visible and near-infrared wave band. To verify the theoretical analysis, the characteristics of the double Wollaston prism are also studied experimentally.

  12. Brain Activity Stimulated by Prism Adaptation Tasks Utilized for the Treatment of Unilateral Spatial Neglect: A Study with fNIRS

    Hiroshi Taniguchi

    2012-01-01

    Full Text Available We investigated the neurological basis for efficacy of prism adaptation therapy, which is used for the treatment of poststroke unilateral spatial neglect (USN. Study subjects were 6 USN-positive (+, 6 USN-negative patients, and 6 healthy volunteer control subjects. USN was identified by the Behavioural Inattention Test (BIT. During the tasks, brain activity was assessed with fNIRS via changes in oxyHb concentration per unit length. There was no significant difference in the number of errors in the task between the 3 groups. However, in the USN(+ group there was a significantly greater reduction in oxyHb levels in the right parietal association cortex during the prism adaptation task than in the other 2 groups (<0.05. There was an immediate improvement in USN symptoms as well as a significant increase in oxyHb levels during the prism adaptation in the channels covering the right frontal and parietal lobes in 2 patients in the USN(+ group (<0.05. This result suggested that decreased activity in the right parietal association cortex, which is related to spatial perception, during the prism adaptation task and task-induced reorganization of the right frontal and parietal areas were involved in improvement in USN symptoms.

  13. Perfluorinated Ligands Induce Meridional Metal Stereochemistry to Generate M8L12, M10L15, and M12L18 Prisms.

    Kieffer, Marion; Pilgrim, Ben S; Ronson, Tanya K; Roberts, Derrick A; Aleksanyan, Mina; Nitschke, Jonathan R

    2016-06-01

    Meridional (mer) coordination promotes the generation of larger and lower-symmetry prismatic metallosupramolecular structures, in contrast with the facial (fac) coordination common to smaller and higher-symmetry polyhedra. Here, we describe a general route to the selective formation of large metallosupramolecular prisms that contain exclusively mer-coordinated metal vertices. The use of 2-formylpyridine subcomponents that contain perfluorophenylene substituents at their 5-positions resulted in stereoselective formation of the iron(II) complexes from these subcomponents. Only mer vertices were observed, as opposed to the statistical fac/mer mixture otherwise generated. This mer-selective self-assembly could be used to prepare tetragonal (M8L12), pentagonal (M10L15), and hexagonal (M12L18) prisms by taking advantage of the subtle selectivities imposed by the different anilines and counterions employed. The equilibrium between the tetragonal and pentagonal prism followed a linear free-energy relationship, with the ratio between structures correlating with the Hammett σp(+) parameter of the incorporated aniline. The contrasting preferences of the fluorinated and nonfluorinated ligands to generate prisms and tetrahedra, respectively, were quantified energetically, with the destabilization increasing linearly for each "incorrect ligand" incorporated into either structure. PMID:27145216

  14. Ultrafine Metal-Organic Right Square Prism Shaped Nanowires.

    Otake, Ken-Ichi; Otsubo, Kazuya; Sugimoto, Kunihisa; Fujiwara, Akihiko; Kitagawa, Hiroshi

    2016-05-23

    We report the structural design and control of electronic states of a new series of ultrafine metal-organic right square prism-shaped nanowires. These nanowires have a very small inner diameter of about 2.0 Å, which is larger than hydrogen and similar to xenon atomic diameters. The electronic states of nanowires can be widely controlled by substitution of structural components. Moreover, the platinum homometallic nanowire shows a 100 times higher proton conductivity than a palladium/platinum heterometallic one depending on the electronic states. PMID:27080935

  15. Deformation of the Nankai Trough inner accretionary prism: The role of inherited structures

    Boston, Brian; Moore, Gregory F.; Jurado, María. José; Sone, Hiroki

    2016-02-01

    Accretionary prisms commonly grow seaward, with the strata of the inner prism consisting of older, previously accreted outer prism rocks overlain by thick fore-arc basin strata. We focus on the Nankai Trough inner accretionary prism using three-dimensional (3-D) seismic data and logging data from the Integrated Ocean Drilling Program (IODP). We update the 3-D seismic volume using well velocity data to better constrain deeper horizons. Interpretation of these horizons reveals multiple folds with axial surfaces that strike near parallel to modern outer prism thrust faults, and we interpret that these folds formed as a result of thrust faulting. Reactivation of one inner prism thrust fault continued until at least ˜0.44 Ma, after the modern fore-arc basin formed, indicating that the inner prism had continued deformation until that time. Structural restorations of these folded seismic horizons demonstrate that ˜580 m of slip occurred on this steeply dipping reactivated thrust after fore-arc basin formation. Structural interpretation and analysis of logging-while-drilling data, including borehole images, in the deep inner prism revealed intense deformation of a generally homogenous lithology characterized by bedding that dips steeply (60°-90°), intersected by faults and fractures that have a range of dips and densities. Our study of the deep Kumano Basin provides new insights into the structure of the inner prism and reveals that although the inner prism has partially preserved inherited outer prism structures, these older folds and faults are steeply rotated and cut by multiple fracture populations during subsequent deformation.

  16. Comparison of the AdvanSure Human Papillomavirus Screening Real-Time PCR, the Abbott RealTime High Risk Human Papillomavirus Test, and the Hybrid Capture Human Papillomavirus DNA Test for the Detection of Human Papillomavirus

    Hwang, Yusun; Lee, Miae

    2012-01-01

    Background We evaluated the performance of various commercial assays for the molecular detection of human papillomavirus (HPV); the recently developed AdvanSure HPV Screening real-time PCR assay (AdvanSure PCR) and the Abbott RealTime High Risk HPV PCR assay (Abbott PCR) were compared with the Hybrid Capture 2 HPV DNA Test (HC2). Methods All 3 tests were performed on 177 samples, and any sample that showed a discrepancy in any of the 3 tests was genotyped using INNO-LiPA HPV genotyping and/or...

  17. 全自动血液分析仪Sysmex XE-2100与Abbott CD-3700的比较分析

    范华杰; 凌励; 周道银

    2006-01-01

    目的比较分析Sysmex XE-2100和Abbott CD-3700 2类全自动血液分析仪各项检测参数结果的精确度和相关性.方法选取EDTA-K2抗凝静脉全血,对2台仪器进行精密度和相关性的检测.结果精密度测定,Sysmex XE-2100血细胞计数各参数变异系数(CV)值位于0.24%~3.56%之间,白细胞分类各参数CV值位于0.66%~37.04%之间;Abbott CD-3700血细胞计数各参数CV值位于0.30%~4.37%之间,白细胞分类各参数CV值位于0.92%~27.91%之间.2台仪器间血细胞计数各参数相关系数的平方(r2)位于0.931 2~0.998 7之间.结论 2台仪器各参数精密度符合设计范围,两者之间相关性较好.

  18. The PRISM (Pliocene palaeoclimate) reconstruction: time for a paradigm shift.

    Dowsett, Harry J; Robinson, Marci M; Stoll, Danielle K; Foley, Kevin M; Johnson, Andrew L A; Williams, Mark; Riesselman, Christina R

    2013-10-28

    Global palaeoclimate reconstructions have been invaluable to our understanding of the causes and effects of climate change, but single-temperature representations of the oceanic mixed layer for data-model comparisons are outdated, and the time for a paradigm shift in marine palaeoclimate reconstruction is overdue. The new paradigm in marine palaeoclimate reconstruction stems the loss of valuable climate information and instead presents a holistic and nuanced interpretation of multi-dimensional oceanographic processes and responses. A wealth of environmental information is hidden within the US Geological Survey's Pliocene Research, Interpretation and Synoptic Mapping (PRISM) marine palaeoclimate reconstruction, and we introduce here a plan to incorporate all valuable climate data into the next generation of PRISM products. Beyond the global approach and focus, we plan to incorporate regional climate dynamics with emphasis on processes, integrating multiple environmental proxies wherever available in order to better characterize the mixed layer, and developing a finer time slice within the Mid-Piacenzian Age of the Pliocene, complemented by underused proxies that offer snapshots into environmental conditions. The result will be a proxy-rich, temporally nested, process-oriented approach in a digital format-a relational database with geographic information system capabilities comprising a three-dimensional grid representing the surface layer, with a plethora of data in each cell. PMID:24043866

  19. The PRISM (Pliocene Palaeoclimate) reconstruction: Time for a paradigm shift

    Dowsett, Harry J.; Robinson, Marci M.; Stoll, Danielle K.; Foley, Kevin M.; Johnson, Andrew L. A.; Williams, Mark; Riesselman, Christina

    2013-01-01

    Global palaeoclimate reconstructions have been invaluable to our understanding of the causes and effects of climate change, but single-temperature representations of the oceanic mixed layer for data–model comparisons are outdated, and the time for a paradigm shift in marine palaeoclimate reconstruction is overdue. The new paradigm in marine palaeoclimate reconstruction stems the loss of valuable climate information and instead presents a holistic and nuanced interpretation of multi-dimensional oceanographic processes and responses. A wealth of environmental information is hidden within the US Geological Survey's Pliocene Research,Interpretation and Synoptic Mapping (PRISM) marine palaeoclimate reconstruction, and we introduce here a plan to incorporate all valuable climate data into the next generation of PRISM products. Beyond the global approach and focus, we plan to incorporate regional climate dynamics with emphasis on processes, integrating multiple environmental proxies wherever available in order to better characterize the mixed layer, and developing a finer time slice within the Mid-Piacenzian Age of the Pliocene, complemented by underused proxies that offer snapshots into environmental conditions. The result will be a proxy-rich, temporally nested, process-oriented approach in a digital format—a relational database with geographic information system capabilities comprising a three-dimensional grid representing the surface layer, with a plethora of data in each cell.

  20. The Color Splitting System for TV Cameras - XYZ Prism

    E. Kostal

    2001-09-01

    Full Text Available One of the dominant aspects, which prejudices the quality of colorimage reproduction, is the first operation in TV chain - scanning. Upto this day, the color splitting system, working in RGB colorimetricsystem, is still entirely used. The existence of negative parts of thecolor matching functions r(l, g(l, b(l causes complications byoptical separation of partial pictures R, G, B in classic scanningsystem. It leads to distortion of reproduction of color images.However, the specific technical and scientific applications, where thecolor carries the substantial part of information (cosmic development,medicine, demand high fidelity of color reproduction. This articlesubmits the results of the design of the color splitting system workingin XYZ colorimetric system (next only XYZ prism. Shortly the way toobtain theoretical spectral reflectances of partial filters of XYZprism is described. Further, these filters are approximated by realoptical interference filters and the geometry of XYZ prism isestablished. Finally, the results of the colorimetric distortion testof proposed scanning system are stated.

  1. ABBOTTARCHITECTC16000全自动生化分析仪性能评价%Evaluation on performance of ABBOTT ARCHITECT C16000 automatic biochemistry analyzer

    张娟; 蒋小燕; 李顺君; 黄文芳

    2014-01-01

    Objective To evaluate the main performance of ABBOTT ARCHITECT C160000 biochemistry analyzer,and to judge whether the performance meets the laboratory requirement.Methods According to the clinical laboratory management meth-od and the requirement of accreditation of national laboratory,the precision,accuracy and linearity of the 17 test items(Urea,Cre, UA,Glu,etc.)were analyzed by the CLSI EP5-A2 document,CLSI EP9-A2 document and CLSI EP6-P document;the quotative ref-erence ranges of the 17 test items were verified.Results The coefficient of variation(CV)in within-batch precision of Urea,Cre, UA,Glu,etc.was ≤1/4 CLIA′88 standard and CV in the between-batch precision ≤1/3CLIA′88 standard;in the accuracy test,the relative bias of the 17 test items≤1/2CLIA′88 standard;the linearity of the 17 items was good(r2 >0.95);the cited reference range of various detection items was suitable.Conclusion The performance of the ABBOTT ARCHITECT C160000 automatic biochem-istry analyzer meets the laboratory demand.%目的:对 ABBOTT ARCHITECT C16000生化分析仪主要性能进行评价,判断其是否能够满足本科实验室需求。方法依照实验室管理办法及国家实验室认可的要求,分别采用美国临床和实验室标准化协会(CLSI)的 EP5-A2、EP9-A2和EP6-A 文件评价方法分析尿素(Urea)、肌酐(Cre)、尿酸(UA)和葡萄糖(Glu)等17项检测项目的精密度、准确度和线性;并对各检测项目引用的参考区间进行验证。结果 ABBOTT ARCHITECT C16000生化分析仪 Urea、Cre、UA、Glu 等17项检测项目批内精密度变异系数(CV)均小于或等1/4CLIA′88标准,批间精密度 CV 均小于或等于1/3CLIA′88标准;在准确度试验中,该17项检测项目的相对偏倚均小于或等于1/2CLIA′88标准;线性良好(r2>0.95);各检测项目引用的参考区间合适。结论 ABBOTT ARCHITECT C16000生化分析仪性能满足本实验室需求。

  2. Prism Foil from an LCD Monitor as a Tool for Teaching Introductory Optics

    Planinsic, Gorazd; Gojkosek, Mihael

    2011-01-01

    Transparent prism foil is part of a backlight system in LCD monitors that are widely used today. This paper describes the optical properties of the prism foil and several pedagogical applications suitable for undergraduate introductory physics level. Examples include experiments that employ refraction, total internal reflection, diffraction and…

  3. Investigating First Year Elementary Mathematics Teacher Education Students' Knowledge of Prism

    Bozkurt, Ali; Koc, Yusuf

    2012-01-01

    The purpose of this study was to investigate first year elementary mathematics teacher education students' knowledge of prism. For this goal, the participants were asked to define the geometric concept of prism. The participants were 158 first year elementary mathematics teacher education students from a public university in Southern Turkey. The…

  4. Prism foil from an LCD monitor as a tool for teaching introductory optics

    Transparent prism foil is part of a backlight system in LCD monitors that are widely used today. This paper describes the optical properties of the prism foil and several pedagogical applications suitable for undergraduate introductory physics level. Examples include experiments that employ refraction, total internal reflection, diffraction and image formation in a nontrivial way and are therefore particularly useful for active learning strategies.

  5. Hierarchically triangular prism structured Co3O4: Self-supported fabrication and photocatalytic property

    The formation of ammonium cobalt (II) phosphate was utilized to synthesize unprecedented 3D structures of Co3O4, triangular prisms and trunk-like structures, via a self-supported and organics-free method. The length of a triangular side of the prepared 3D triangular prisms is ~1...

  6. DEVELOPMENT OF A NEW OREGON PRECIPITATION MAP USING THE PRISM MODEL

    Significant progress in our ability to distribute point monthly and annual precipitation data to a regular grid in complex terrain has recently been achieved through the development of PRISM (Precipitation-elevation Regressions on Independent Slopes Model) . PRISM is well suited ...

  7. Simultaneous adaptation of the thumb and index finger of the same hand to opposite prism displacements

    Schot, Willemijn D; Brenner, Eli; Smeets, Jeroen B J

    2014-01-01

    It only takes a few goal-directed hand movements to adapt one's movements to a prism-induced displacement of the visual scene. Adaptation to the displacement leads to errors in the opposite direction from the initial displacement when the prisms are removed. Such aftereffects are thought to arise fr

  8. Electron sharing and anion-π recognition in molecular triangular prisms.

    Schneebeli, Severin T; Frasconi, Marco; Liu, Zhichang; Wu, Yilei; Gardner, Daniel M; Strutt, Nathan L; Cheng, Chuyang; Carmieli, Raanan; Wasielewski, Michael R; Stoddart, J Fraser

    2013-12-01

    Stacking on a full belly: Triangular molecular prisms display electron sharing among their triangularly arranged naphthalenediimide (NDI) redox centers. Their electron-deficient cavities encapsulate linear triiodide anions, leading to the formation of supramolecular helices in the solid state. Chirality transfer is observed from the six chiral centers of the filled prisms to the single-handed helices. PMID:24227594

  9. Relationship between Timing Jitter and Prism Separation in Mode-locked Solid State Lasers

    LU Hong

    2001-01-01

    The function expression of the group delay dispersion (GDD) depending on the prism separation and the normal displacement is derived, and that the GDD is proportional to the prism separation and near to a linear function of the normal displacement in the case of small normal displacement are found. Then we discuss the timing jitter caused by the amplified spontaneous emission (ASE) which depends on the prism separation and the normal displacement. We find that the timing jitter is near to a linear function of the prism separation and can be regrded as a linear function of the normal displacement in the case of small normal displacement. Based on the theoretic work, we suggest an experimental setup to measure the relationship between the timing jitter and the prism separation or the normal displacement.

  10. ePRISM: A case study in multiple proxy and mixed temporal resolution integration

    Robinson, Marci M.; Dowsett, Harry J.

    2010-01-01

    As part of the Pliocene Research, Interpretation and Synoptic Mapping (PRISM) Project, we present the ePRISM experiment designed I) to provide climate modelers with a reconstruction of an early Pliocene warm period that was warmer than the PRISM interval (similar to 3.3 to 3.0 Ma), yet still similar in many ways to modern conditions and 2) to provide an example of how best to integrate multiple-proxy sea surface temperature (SST) data from time series with varying degrees of temporal resolution and age control as we begin to build the next generation of PRISM, the PRISM4 reconstruction, spanning a constricted time interval. While it is possible to tie individual SST estimates to a single light (warm) oxygen isotope event, we find that the warm peak average of SST estimates over a narrowed time interval is preferential for paleoclimate reconstruction as it allows for the inclusion of more records of multiple paleotemperature proxies.

  11. Optical device with conical input and output prism faces

    Brunsden, Barry S.

    1981-01-01

    A device for radially translating radiation in which a right circular cylinder is provided at each end thereof with conical prism faces. The faces are oppositely extending and the device may be severed in the middle and separated to allow access to the central part of the beam. Radiation entering the input end of the device is radially translated such that radiation entering the input end at the perimeter is concentrated toward the output central axis and radiation at the input central axis is dispersed toward the output perimeter. Devices are disclosed for compressing beam energy to enhance drilling techniques, for beam manipulation of optical spatial frequencies in the Fourier plane and for simplification of dark field and color contrast microscopy. Both refracting and reflecting devices are disclosed.

  12. Cosmic topology of prism double-action manifolds

    The cosmic microwave background (CMB) anisotropies in spherical 3-spaces with a non-trivial topology are studied. This paper discusses the special class of the so-called double-action manifolds, which are for the first time analysed with respect to their CMB anisotropies. The CMB anisotropies are computed for all prism double-action manifolds generated by a binary dihedral and a cyclic group with a group order of up to 180 leading to 33 different topologies. Several spaces are found which show a suppression of the CMB anisotropies on large angular distances as it is found on the real CMB sky. It turns out that two of these spaces possess Dirichlet domains which are not very far from highly symmetric polyhedra like Platonic or Archimedean ones. (paper)

  13. Mass spectrometers based on a cone-shaped acromatic prism

    We have elaborated a mass spectrometer without lenses consisting of one conic achromatic prism. It has a specific mass dispersion which is equal to 67.5 mm/m per 1% change of mass. (By specific dispersion we mean linear dispersion related to the main path.) The pass of charged particles with different emittance is investigated with the help of integrating precise equations for tracks of charged particles in natural curvilinear coordinates. We have calculated the resolving power and aberration of a mass spectrometer for different beams of particles. It is evident that the mass spectrometer is particularly effective in use when we deal with rather wide ion beams having an insignificant angular divergence in the mean plane. (orig.)

  14. Acoustic Prism for Continuous Beam Steering Based on Piezoelectric Metamaterial

    Xu, Jiawen

    2016-01-01

    This paper investigates an acoustic prism for continuous acoustic beam steering by a simple frequency sweep. This idea takes advantages of acoustic wave velocity shifting in metamaterials in the vicinity of local resonance. We apply this concept into the piezoelectric metamaterial consisting of host medium and piezoelectric LC shunt. Theoretical modeling and FEM simulations are carried out. It is shown that the phase velocity of acoustic wave changes dramatically in the vicinity of local resonance. The directions of acoustic wave can be adjusted continuously between 2 to 16 degrees by a simple sweep of the excitation frequency. Such an electro-mechanical coupling system has a feature of adjusting local resonance without altering the mechanical part of the system.

  15. A VUV prism spectrometer for RICH radiator refractometry

    Moyssides, P G; Fokitis, E

    2000-01-01

    A prism spectrometer has been developed to operate in the VUV wavelength range from 120 to 200 nm. It can be used as a pre- disperser in conjunction with a Fabry-Perot based gas refractometer. This instrument has also been used to measure the refractive index of the liquid radiator C/sub 6/F/sub 14/ in various spectral lines. This radiator is used in the RICH detectors of the DELPHI experiment and has been proposed for ALICE, and LHCb experiments. The spectral resolution of the system is improved as the wavelength decreases and the data are consistent with a wavelength accuracy about 0.4 nm at 140 nm. The results for the dispersion curve of the above liquid are presented. (17 refs).

  16. Mass spectrometers based on a cone-shaped acromatic prism

    Spivak-Lavrov, I.F. [Pedagogical Inst. of Aktyubinsk (Kazakhstan)

    1995-09-01

    We have elaborated a mass spectrometer without lenses consisting of one conic achromatic prism. It has a specific mass dispersion which is equal to 67.5 mm/m per 1% change of mass. (By specific dispersion we mean linear dispersion related to the main path.) The pass of charged particles with different emittance is investigated with the help of integrating precise equations for tracks of charged particles in natural curvilinear coordinates. We have calculated the resolving power and aberration of a mass spectrometer for different beams of particles. It is evident that the mass spectrometer is particularly effective in use when we deal with rather wide ion beams having an insignificant angular divergence in the mean plane. (orig.).

  17. R&D proposal the prism plastic calorimeter:PPC

    Dobrzynski, Ludwik; Marchand, P; Nédélec, P; Salin, P; CERN. Geneva. Detector Research and Development Committee

    1990-01-01

    This proposal supports two goals: First Goal_Demonstrate that current, widely used plastic technologies allow to design Prism Plastic Calorimeter (PPC) towers with a new "liquid crystal" type plastic called Vectra. It will be shown that this technique meets the requirements for a LHC calorimeter with warm liquids: safety, hermeticity, hadronic compensation, resolution and time response. Second Goal_ Describe how one can design a warm liquid calorimeter integrated into a LHC detector,and list the advantages of the PPC: low price, minimum of mechanical structures, minimum amount of dead space, easiness of mechanical assembly, accessibility to the electronics, possibility to recirculate the liquid. The absorber and the electronics being outside the liquid and easily accessible, one has maximum flexibility to define them. The R&D program we define here aims at showing the feasibility of these new ideas by building nine towers of twenty gaps and exposing them to electron and hadron beams.

  18. Structure of a growing accretionary prism, Hikurangi margin, New Zealand

    Davey, F. J.; Hampton, M.; Childs, J.; Fisher, M. A.; Lewis, K.; Pettinga, J. R.

    1986-08-01

    The Hikurangi margin of eastern North Island, New Zealand, represents the feather edge of the Indian plate at its convergent boundary with the subducting Pacific plate. A migrated seismic reflection profile across this margin clearly displays the structural evolution of an accretionary prism. A 25-km-wide band of “protothrusts” is delineated between the toe of the slope and a converging seamount; this illustrates an early stage in the seaward propagation of a deformation front. Landward-tilted trench-slope basins are separated by ridges that have clearly defined thrusts, which appear to sole out at a decollement. The decollement continues at an angle of only 3° beneath the 150-km-wide margin to a depth of 14 km near the coast where it coincides with an onshore zone of high seismicity.

  19. Larmor labeling of neutron spin using superconducting Wollaston prisms

    Li, Fankang

    Neutron spin Larmor labeling using magnetic Wollaston prisms (WP) provides a way to overcome some of the limitations arising from the nature of neutron beams: low flux and divergence. Using superconducting films and tapes, a series of strong, well-defined shaped magnetic fields can be produced due to both the zero-resistance and Meissner effect in superconductors. Using finite element simulations, the criterion to build a superconducting magnetic Wollaston prism with high encoding efficiency and low Larmor phase aberrations are presented. To achieve a high magnetic field and simplify the maintenance, we optimize the design using careful thermal analysis. The measured neutron spin flipping efficiency is measured to be independent of both the neutron wavelength and energizing current, which is a significant improvement over other devices with similar functions. A highly linear variation of the Larmor phase is measured across the device, which ensures a highly uniform encoding of scattering angles into the neutron spin Larmor phase. Using two WPs, the correlation function for a colloidal silica sample was measured by spin echo modulated small angle neutron scattering (SEMSANS) and agrees well with other techniques. Using Monte Carlo code (McStas), we further investigated the SEMSANS setup and showed the requirements to improve its performance. We have proposed a new technique to implement neutron spin echo on a triple axis neutron spectrometer to achieve high resolution measurements of the lifetime of dispersive phonon excitations. The spin echo is tuned by appropriate choice of magnetic fields instead of physically tilting the coils used in traditional methods. This new approach allows a higher energy resolution and a larger effective tilting angle and hence larger group velocity to be measured.

  20. Results of the Abbott RealTime HIV-1 Assay for Specimens Yielding “Target Not Detected” Results by the Cobas AmpliPrep/Cobas TaqMan HIV-1 Test▿

    Babady, N. Esther; Germer, Jeffrey J.; Yao, Joseph D. C.

    2009-01-01

    No significantly discordant results were observed between the Abbott RealTime HIV-1 assay and the COBAS AmpliPrep/COBAS TaqMan HIV-1 Test (CTM) among 1,190 unique clinical plasma specimens obtained from laboratories located in 40 states representing all nine U.S. geographic regions and previously yielding “target not detected” results by CTM.

  1. Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM)

    We propose a compressive sensing approach for multi-energy computed tomography (CT), namely the prior rank, intensity and sparsity model (PRISM). To further compress the multi-energy image for allowing the reconstruction with fewer CT data and less radiation dose, the PRISM models a multi-energy image as the superposition of a low-rank matrix and a sparse matrix (with row dimension in space and column dimension in energy), where the low-rank matrix corresponds to the stationary background over energy that has a low matrix rank, and the sparse matrix represents the rest of distinct spectral features that are often sparse. Distinct from previous methods, the PRISM utilizes the generalized rank, e.g., the matrix rank of tight-frame transform of a multi-energy image, which offers a way to characterize the multi-level and multi-filtered image coherence across the energy spectrum. Besides, the energy-dependent intensity information can be incorporated into the PRISM in terms of the spectral curves for base materials, with which the restoration of the multi-energy image becomes the reconstruction of the energy-independent material composition matrix. In other words, the PRISM utilizes prior knowledge on the generalized rank and sparsity of a multi-energy image, and intensity/spectral characteristics of base materials. Furthermore, we develop an accurate and fast split Bregman method for the PRISM and demonstrate the superior performance of the PRISM relative to several competing methods in simulations. (papers)

  2. Left-Deviating Prism Adaptation in Left Neglect Patient: Reflexions on a Negative Result

    Jacques Luauté

    2012-01-01

    Full Text Available Adaptation to right-deviating prisms is a promising intervention for the rehabilitation of patients with left spatial neglect. In order to test the lateral specificity of prism adaptation on left neglect, the present study evaluated the effect of left-deviating prism on straight-ahead pointing movements and on several classical neuropsychological tests in a group of five right brain-damaged patients with left spatial neglect. A group of healthy subjects was also included for comparison purposes. After a single session of exposing simple manual pointing to left-deviating prisms, contrary to healthy controls, none of the patients showed a reliable change of the straight-ahead pointing movement in the dark. No significant modification of attentional paper-and-pencil tasks was either observed immediately or 2 hours after prism adaptation. These results suggest that the therapeutic effect of prism adaptation on left spatial neglect relies on a specific lateralized mechanism. Evidence for a directional effect for prism adaptation both in terms of the side of the visuomanual adaptation and therefore possibly in terms of the side of brain affected by the stimulation is discussed.

  3. Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM).

    Gao, Hao; Yu, Hengyong; Osher, Stanley; Wang, Ge

    2011-11-01

    We propose a compressive sensing approach for multi-energy computed tomography (CT), namely the prior rank, intensity and sparsity model (PRISM). To further compress the multi-energy image for allowing the reconstruction with fewer CT data and less radiation dose, the PRISM models a multi-energy image as the superposition of a low-rank matrix and a sparse matrix (with row dimension in space and column dimension in energy), where the low-rank matrix corresponds to the stationary background over energy that has a low matrix rank, and the sparse matrix represents the rest of distinct spectral features that are often sparse. Distinct from previous methods, the PRISM utilizes the generalized rank, e.g., the matrix rank of tight-frame transform of a multi-energy image, which offers a way to characterize the multi-level and multi-filtered image coherence across the energy spectrum. Besides, the energy-dependent intensity information can be incorporated into the PRISM in terms of the spectral curves for base materials, with which the restoration of the multi-energy image becomes the reconstruction of the energy-independent material composition matrix. In other words, the PRISM utilizes prior knowledge on the generalized rank and sparsity of a multi-energy image, and intensity/spectral characteristics of base materials. Furthermore, we develop an accurate and fast split Bregman method for the PRISM and demonstrate the superior performance of the PRISM relative to several competing methods in simulations. PMID:22223929

  4. The penta-prism LTP: A long-trace-profiler with stationary optical head and moving penta prism (abstract)

    Metrology requirements for optical components for third generation synchrotron sources are taxing the state-of-the-art in manufacturing technology. We have investigated a number of effect sources in a commercial figure measurement instrument, the Long Trace Profiler II (LTP II), and have demonstrated that, with some simple modifications, we can significantly reduce the effect of error sources and improve the accuracy and reliability of the measurement. By keeping the optical head stationary and moving a penta prism along the translation stage, the stability of the optical system is greatly improved, and the remaining error signals can be corrected by a simple reference beam subtraction. We illustrate the performance of the modified system by investigating the distortion produced by gravity on a typical synchrotron mirror and demonstrate the repeatability of the instrument despite relaxed tolerances on the translation stage

  5. Assessment of hydrologic and water quality data collected in Abbotts Lagoon watershed, Point Reyes National Seashore, California, during water years 1999 and 2000

    Kratzer, Charles R.; Saleh, Dina K.; Zamora, Celia

    2006-01-01

    Abbotts Lagoon is part of Point Reyes National Seashore, located about 40 miles northwest of San Francisco and about 20 miles south of Bodega Bay. Water-quality samples were collected quarterly during water year 1999 at a site in each of three connected lagoons that make up Abbotts Lagoon and at a site in its most significant tributary. The quarterly samples were analyzed for major ions, nutrients, and chlorophyll-a. A bed-sediment sample was collected in each lagoon during August 1999 and was analyzed for organic carbon, iron, and total phosphorus. Seven tributaries were sampled during a February 1999 storm and four during an April 1999 storm. These samples were analyzed only for nutrients. One storm sample collected in April 1999 from a tributary downstream of the I Ranch dairy was analyzed for a suite of 47 compounds indicative of wastewater. Continuous water-level recorders were installed in the most significant tributary and the two largest lagoons for portions of the study. A water budget analysis for an April 2000 storm indicated that the main tributary accounted for 85 percent of surface inflows to Abbotts Lagoon. The portion of the surface inflow from the main tributary was lower in the February 1999 storms and is a function of upstream storage and vegetative growth in the tributary basins. Another water budget analysis for a period of no surface inflow (June and July 2000) indicated that the net ground-water contribution was an outflow (seepage) from Abbotts Lagoon of about 0.3 ft3/s. Salinity increased and nutrient concentrations decreased from upstream to downstream in the chain of lagoons. The lower lagoon, nearest the ocean, had less organic carbon and total phosphorus in the bed sediment than the upper lagoons. The two tributaries originating in the I Ranch dairy had the highest concentrations of nutrients in storm runoff, and the highest loading rates and yields of ammonia and phosphorus. These tributaries account for only 10.3 percent of the area

  6. Analysis of an Attenuator Artifact in an Experimental Attack by Gunn-Allison-Abbott Against the Kirchhoff-Law-Johnson-Noise (KLJN) Secure Key Exchange System

    Kish, Laszlo B.; Gingl, Zoltan; Mingesz, Robert; Vadai, Gergely; Smulko, Janusz; Granqvist, Claes-Göran

    2015-12-01

    A recent paper by Gunn-Allison-Abbott (GAA) [L. J. Gunn et al., Scientific Reports 4 (2014) 6461] argued that the Kirchhoff-law-Johnson-noise (KLJN) secure key exchange system could experience a severe information leak. Here we refute their results and demonstrate that GAA's arguments ensue from a serious design flaw in their system. Specifically, an attenuator broke the single Kirchhoff-loop into two coupled loops, which is an incorrect operation since the single loop is essential for the security in the KLJN system, and hence GAA's asserted information leak is trivial. Another consequence is that a fully defended KLJN system would not be able to function due to its built-in current-comparison defense against active (invasive) attacks. In this paper we crack GAA's scheme via an elementary current-comparison attack which yields negligible error probability for Eve even without averaging over the correlation time of the noise.

  7. Enhanced performance of wind energy harvester by aerodynamic treatment of a square prism

    Hu, Gang; Tse, K. T.; Kwok, K. C. S.

    2016-03-01

    This letter presents the effects that fitting fins to various corners of a square-prism galloping-based piezoelectric energy harvester (PEH) has on its performance, based on results from a series of wind tunnel model tests. The results show that attaching fins to the leading edge significantly improves the efficiency of the harvester, achieving a maximum power 2.5 times that attained by a plain square prism PEH. Furthermore, a length that is 1/6 of the prism's cross-sectional width is found to be optimal for fins that are attached to the harvester.

  8. Does prism width from the shell prismatic layer have a random distribution?

    Verrecchia, Eric P.; Vancolen, Séverine

    2009-01-01

    A study of the distribution of the prism width inside the prismatic layer of Unio tumidus (Philipsson 1788, Diss Hist-Nat, Berling, Lundæ) from Lake Neuchâtel, Switzerland, has been conducted in order to determine whether or not this distribution is random. Measurements of 954 to 1,343 prism widths (depending on shell sample) have been made using a scanning electron microscope in backscattered electron mode. A white noise test has been applied to the distribution of prism sizes (i.e. width). ...

  9. Structure-Property Relationship for Two-Photon Absorbing Multiporphyrins: Supramolecular Assembly of Highly-Conjugated Multiporphyrinic Ladders and Prisms

    Easwaramoorthi, Shanmugam; Jang, So Young; Yoon, Zin Seok; Lim, Jong Min; Lee, Cheng-Wei; Mai, Chi-Lun; Liu, Yen-Chun; Yeh, Chen-Yu; Vura-Weis, Josh; Wasielewski, Michael R.; Kim, Dongho (NWU); (Yonsei); (NSHU)

    2008-10-03

    Two-photon absorption (TPA) phenomena of a series of single-strand as well as supramolecular self-assembled ladders and prisms of highly conjugated ethyne bridged multiporphyrin dimer, trimer, and star shaped pentamer have been investigated. The ligand mediated self-assembled supramolecular structures were characterized by UV-visible spectroscopy and small- and wide-angle X-ray scattering (SAXS/WAXS) analysis. The TPA cross section values of multiporphyrins increase nonlinearly from {approx}100 to {approx}18000 GM with an increased number of porphyrin units and elongated ?-conjugation length by virtue of charge transfer and excited-state cumulenic configurations. The observed opposite TPA behavior between their supramolecular ladder and prism configurations necessitates the importance of interstrand interactions between the multiporphyrinic units and the overall shape of the assembly. Furthermore, the diminished TPA cross section of the pentamer, despite the increased ?-conjugation resulting from duplex formation suggests that destabilizing the essential functional configurations at the cost of elongation of ?-delocalization pathway must cause unfavorable effects. We have also shown that one- and two-photon allowed energy-levels of linear multiporphyrins are nearly isoenergetic and the latter transition originates exclusively from the extent of ?-delocalization within the molecule. The identical TPA maximum position of the trimer and pentamer indicates that the TPA of the pentamer arises only from its basic trimer unit in spite of its extended two-dimensional {pi}-conjugation pathway involving five porphyrinic units.

  10. Prism-C2n carbon dimer, trimer, and nano-sheets: A quantum chemical study

    Ohno, Koichi; Satoh, Hiroko; Iwamoto, Takeaki

    2015-07-01

    Quantum chemical calculations have predicted the existence of a new carbon family with double-layered structures formed by arranging prism-C2n (n = 6, 8, and 12) units. Theoretical explorations of potential energy surfaces suggest the lowest barriers of the reaction channels to be ca. 30 kJ mol-1 for a D2h prism-C16 dimer and a D3h prism-C24 trimer. Geometry optimizations under periodic boundary conditions yield some prism-C2n sheets composed of CC single bonds of ca. 0.15-0.16 nm. The relative energies per one atom with respect to graphene are 90-160 kJ mol-1. Van der Waals thickness is estimated to be ca. 0.5 nm.

  11. Finite layer and triangular prism element method to subsidence prediction and stress analysis in underground mining

    LIU Li-min(刘立民); LIU Han-long(刘汉龙); LIAN Chuan-jie(连传杰)

    2003-01-01

    The application of the finite layer & triangular prism element method to the 3D ground subsidence and stress analysis caused by mining is presented. The layer elements and the triangular prism elements have been alternatively used in the numerical simulation system, the displacement pattern, strain matrix, elastic matrix, stiffness matrix, load matrix and the stress matrix of the layer element and triangular prism element have been presented. By means of the Fortran90 programming language, a numerical simulation system based on finite layer & triangular prism element have been built up, and this system is suitable for subsidence prediction and stress analysis of all mining condition and mining methods. Comparing with the infinite element method, this approach dramatically reduces the size of the set of equations that need to be solved, and greatly reduces the amount of data preparation required. It not only saves the internal storage, and the computation time, but also decreases the cost.

  12. Improvement of Mental Imagery after Prism Exposure in Neglect: A Case Study

    Gilles Rode

    1999-01-01

    Full Text Available Previous work has shown that various symptoms of unilateral neglect, including the pathological shift of the subjective midline to the right, may be improved by a short adaptation period to a prismatic shift of the visual field to the right. We report here the improvement of imagined neglect after prism exposure in a patient with a left unilateral neglect. Despite a strong neglect observed for mental images as well as for conventional tests, the mental evocation of left-sided information from an internal image of the map of France map was fully recovered following prism adaptation to the right. This improvement could not be explained by the alteration of visuomotor responses induced by the prism adaptation. Prism adaptation may therefore act not only on sensory-motor levels but also on a higher cognitive level of mental space representation and/or exploration.

  13. Prism-assisted inclined UV lithography for 3D microstructure fabrication

    A prism-assisted inclined ultraviolet (UV) lithography technique is introduced for the fabrication of three-dimensional (3D) microstructures. Slanted structures with exposure angles ranging from 0° to 60° in SU-8 photoresist have been easily achieved without immersion in the index matching liquid. The fabrication process of multidirectional slanted structures can be simplified by one-step UV exposure using a prism with multidirectional side surfaces. A corner prism and a cone prism have been used in our experiment to demonstrate this concept. Upside-down tripod structures and horn structures have been fabricated in one-step exposures. The effective exposure area as one key parameter of the one-step exposure is analyzed for practical applications. Examples of various 3D microstructures fabricated by this method are presented. (paper)

  14. A study on transmitted intensity's perturbance for air-spaced Glan-type polarizing prisms

    Fan, J Y; Wu, F Q; Fan, Ji-Yang; Li, Hong-Xia; Wu, Fu-Quan

    2003-01-01

    The explanation for the perturbance of the transmitted intensity for air-spaced Glan-type polarizing prisms with varying rotation angle newly observed in the experiment is given. It is found that the transmitted intensity depends sensitively on the angle of incidence at the cut of the Glan-type prism. The minute fluctuation for values of the angle of incidence during the rotation of the stepmotor gives rise to the perturbance. The relation between the perturbance and the wavelength and the thickness of the air-gap is carefully investigated. Study shows that the disturbance for the Glan-Foucault prism is much stronger than that for the Glan-Taylor prism, as the experimental results have indicated. Theoretical results are perfectly in accordance with the experimental results. Effective measures for reducing the disturbance are presented.

  15. TEST METHOD FOR SINGLE INTERIOR RIGHT ANGLE IN A CORNER CUBE PRISM

    2000-01-01

    A new test method for single interior right angle in a corner cube prism is presented. Some key points and parameters are analyzed and derived. The advantage of this method is concluded by comparing with some current conventional methods.

  16. Fusional Vergence Detected by Prism Bar and Synoptophore in Chinese Childhood Intermittent Exotropia

    2015-01-01

    Purpose. To measure the changes in fusional vergence in Chinese children with intermittent exotropia (IXT) and the association with the control of IXT. Methods. Ninety-two patients with IXT (8–15 years old) were compared with 86 controls. Exodeviation control was evaluated using the Revised Newcastle Control Score. Angle of deviation was measured using prism and alternate cover testing at distance and near. Fusional vergence was measured using prism bar and synoptophore. This study was regist...

  17. PRISM (Polarized Radiation Imaging and Spectroscopy Mission): an extended white paper

    PRISM Collaboration

    2014-01-01

    PRISM (Polarized Radiation Imaging and Spectroscopy Mission) was proposed to ESA in May 2013 as a large-class mission for investigating within the framework of the ESA Cosmic Vision program a set of important scientific questions that require high resolution, high sensitivity, full-sky observations of the sky emission at wavelengths ranging from millimeter-wave to the far-infrared. PRISM's main objective is to explore the distant universe, probing cosmic history from very early times until no...

  18. The dual Jacobian of a generalised tetrahedron, and volumes of prisms

    Kolpakov, Alexander; Murakami, Jun

    2014-01-01

    We derive an analytic formula for the dual Jacobian matrix of a generalised hyperbolic tetrahedron. Two cases are considered: a mildly truncated and a prism truncated tetrahedron. The Jacobian for the latter arises as an analytic continuation of the former, that falls in line with a similar behaviour of the corresponding volume formulae. Also, we obtain a volume formula for a hyperbolic $n$-gonal prism: the proof requires the above mentioned Jacobian, employed in the analysis of the edge leng...

  19. Nitridation aspects of a basal and a prism plane textured Ti film

    High dose nitrogen implantation into a basal and a prism plane textured Ti film show differences in their end products. While the basal plane textured Ti film undergoes complete transformation to δ-TiN for a dose of 3 x 1017 ions/cm2, the prism plane textured film has a mixture of Ti and TiN for the same dose. The results indicate that the texture of the starting material has synergistic effects on the phase transformation. (author)

  20. Effects of prism adaptation on motor-intentional spatial bias in neglect

    Fortis, Paola; Chen, Peii; Goedert, Kelly M.; Barrett, Anna M.

    2011-01-01

    Prism adaptation may alleviate some symptoms of spatial neglect. However, the mechanism through which this technique works is still unclear. The current study investigated whether prism adaptation differentially affects dysfunction in perceptual-attentional “where” versus motor-intentional “aiming” bias. Five neglect patients performed a line bisection task in which lines were viewed under both normal and right-left reversed viewing conditions, allowing for the fractionation of “where” and “a...

  1. PERANCANGAN DAN IMPLEMENTASI SISTEM PENGUKURAN KINERJA DENGAN METODE PERFORMANCE PRISM (Studi Kasus pada Hotel X)

    Iwan Vanany; Dian Tanukhidah

    2004-01-01

    This article described a result of research design of performance measurement system in hotel business with Performance Prism Model. As long as, performance measurement system at hotel X not yet representatived organization performance according to comprehensif and integrated. Because of needed redesign performance measurement system with new model. From the objective condition of hotel X, Performance Prism model more representative than others. The result of design described that stakeholder...

  2. PrismTech Data Distribution Service Java API Evaluation

    Riggs, Cortney

    2008-01-01

    My internship duties with Launch Control Systems required me to start performance testing of an Object Management Group's (OMG) Data Distribution Service (DDS) specification implementation by PrismTech Limited through the Java programming language application programming interface (API). DDS is a networking middleware for Real-Time Data Distribution. The performance testing involves latency, redundant publishers, extended duration, redundant failover, and read performance. Time constraints allowed only for a data throughput test. I have designed the testing applications to perform all performance tests when time is allowed. Performance evaluation data such as megabits per second and central processing unit (CPU) time consumption were not easily attainable through the Java programming language; they required new methods and classes created in the test applications. Evaluation of this product showed the rate that data can be sent across the network. Performance rates are better on Linux platforms than AIX and Sun platforms. Compared to previous C++ programming language API, the performance evaluation also shows the language differences for the implementation. The Java API of the DDS has a lower throughput performance than the C++ API.

  3. PRISM: A DATA-DRIVEN PLATFORM FOR MONITORING MENTAL HEALTH.

    Kamdar, Maulik R; Wu, Michelle J

    2016-01-01

    Neuropsychiatric disorders are the leading cause of disability worldwide and there is no gold standard currently available for the measurement of mental health. This issue is exacerbated by the fact that the information physicians use to diagnose these disorders is episodic and often subjective. Current methods to monitor mental health involve the use of subjective DSM-5 guidelines, and advances in EEG and video monitoring technologies have not been widely adopted due to invasiveness and inconvenience. Wearable technologies have surfaced as a ubiquitous and unobtrusive method for providing continuous, quantitative data about a patient. Here, we introduce PRISM-Passive, Real-time Information for Sensing Mental Health. This platform integrates motion, light and heart rate data from a smart watch application with user interactions and text entries from a web application. We have demonstrated a proof of concept by collecting preliminary data through a pilot study of 13 subjects. We have engineered appropriate features and applied both unsupervised and supervised learning to develop models that are predictive of user-reported ratings of their emotional state, demonstrating that the data has the potential to be useful for evaluating mental health. This platform could allow patients and clinicians to leverage continuous streams of passive data for early and accurate diagnosis as well as constant monitoring of patients suffering from mental disorders. PMID:26776198

  4. Optical system design of the Dyson imaging spectrometer based on the Fery prism

    Pei, Linlin; Xiangli, Bin; Lv, Qunbo; Shao, Xiaopeng

    2016-08-01

    Imaging spectrometer has obtained wide development since rich feature information can be obtained by it; now, we focus on its high spectral resolution and miniaturization. In this paper, we design the Dyson imaging spectrometer system based on Fery prism. The average spectral resolution is 4.3 nm and the structure of the total length is 229 mm. It is a small, high-spectrometer imaging system. The front and rear surface of the traditional prism are plane, but the surfaces of the Fery prism are spherical, which can provide some optical power to realize imaging function and produce the dispersion effect. The Fery prism does not need to be placed in the parallel optical path, which simplifies the collimator lens and the imaging lens and are necessary in the prism spectrometer, making it possible to obtain a compact spectrometer. Full-spectrum transmittance of the prism is up to 94 %. Compared to the convex grating, the energy efficiency is greatly improved, and the free spectral range is wider, and its dispersion will not bring higher-order spectral aliasing problem. The small high spectrometer only includes two components. Its spectral range is from 400 to 1000 nm, covering the near-ultraviolet to near-infrared. The various aberrations of the typical spectrum are corrected. The spectrometer is excellent in performance.

  5. Rhomboid prism pair for rotating the plane of parallel light beams

    Orloff, K. L. (Inventor); Yanagita, H.

    1982-01-01

    An optical system is described for rotating the plane defined by a pair of parallel light beams. In one embodiment a single pair of rhomboid prisms have their respective input faces disposed to receive the respective input beams. Each prism is rotated about an axis of revolution coaxial with each of the respective input beams by means of a suitable motor and gear arrangement to cause the plane of the parallel output beams to be rotated relative to the plane of the input beams. In a second embodiment, two pairs of rhomboid prisms are provided. In a first angular orientation of the output beams, the prisms merely decrease the lateral displacement of the output beams in order to keep in the same plane as the input beams. In a second angular orientation of the prisms, the input faces of the second pair of prisms are brought into coincidence with the input beams for rotating the plane of the output beams by a substantial angle such as 90 deg.

  6. Optical system design of the Dyson imaging spectrometer based on the Fery prism

    Pei, Linlin; Xiangli, Bin; Lv, Qunbo; Shao, Xiaopeng

    2016-07-01

    Imaging spectrometer has obtained wide development since rich feature information can be obtained by it; now, we focus on its high spectral resolution and miniaturization. In this paper, we design the Dyson imaging spectrometer system based on Fery prism. The average spectral resolution is 4.3 nm and the structure of the total length is 229 mm. It is a small, high-spectrometer imaging system. The front and rear surface of the traditional prism are plane, but the surfaces of the Fery prism are spherical, which can provide some optical power to realize imaging function and produce the dispersion effect. The Fery prism does not need to be placed in the parallel optical path, which simplifies the collimator lens and the imaging lens and are necessary in the prism spectrometer, making it possible to obtain a compact spectrometer. Full-spectrum transmittance of the prism is up to 94 %. Compared to the convex grating, the energy efficiency is greatly improved, and the free spectral range is wider, and its dispersion will not bring higher-order spectral aliasing problem. The small high spectrometer only includes two components. Its spectral range is from 400 to 1000 nm, covering the near-ultraviolet to near-infrared. The various aberrations of the typical spectrum are corrected. The spectrometer is excellent in performance.

  7. Lens-Prism Correctors For Ritchey-Chretien And Quasi Ritchey-Chretien Foci

    Ding-qiang, Su; Ming, Liang

    1986-08-01

    Two new lens-prism correctors are designed for secondary foci, of which the diameter of the primary is 7.5 meter, the f-ratio of the primary is 2 and the final f-ratio is about 5.4. The field of view of the R-C system is 46 and that of the quasi R-C system is 1°. These correctors can be used for the correction of both the aberrations and the atmospheric disper-sion. They consist of two cemented lenses. Each cemented lens is made of two different kinds of glasses, of which the indexes of refraction are near and the dispersions are different. The cemented surface is tilted. The two cemented lenses can rotate oppositly around the optical axis for correcting the atmospheric dispersion at different zenith distance. All of surfaces of these correctors are spherical. Spot diagrams of two systems are given for three relative orientations of two cemented lenses, each at nine positions in the field of view, which show both the monochromatic image quality and the effect of correcting the atmospheric dispersion are excellent.

  8. PRISM offers a comprehensive genomic approach to transcription factor function prediction

    Wenger, A. M.

    2013-02-04

    The human genome encodes 1500-2000 different transcription factors (TFs). ChIP-seq is revealing the global binding profiles of a fraction of TFs in a fraction of their biological contexts. These data show that the majority of TFs bind directly next to a large number of context-relevant target genes, that most binding is distal, and that binding is context specific. Because of the effort and cost involved, ChIP-seq is seldom used in search of novel TF function. Such exploration is instead done using expression perturbation and genetic screens. Here we propose a comprehensive computational framework for transcription factor function prediction. We curate 332 high-quality nonredundant TF binding motifs that represent all major DNA binding domains, and improve cross-species conserved binding site prediction to obtain 3.3 million conserved, mostly distal, binding site predictions. We combine these with 2.4 million facts about all human and mouse gene functions, in a novel statistical framework, in search of enrichments of particular motifs next to groups of target genes of particular functions. Rigorous parameter tuning and a harsh null are used to minimize false positives. Our novel PRISM (predicting regulatory information from single motifs) approach obtains 2543 TF function predictions in a large variety of contexts, at a false discovery rate of 16%. The predictions are highly enriched for validated TF roles, and 45 of 67 (67%) tested binding site regions in five different contexts act as enhancers in functionally matched cells.

  9. Extended-Range Ultrarefractive 1D Photonic Crystal Prisms

    Ting, David Z.

    2007-01-01

    by use of conventional prisms and diffraction gratings and is highly nonlinear.

  10. XeCl excimer laser with new prism resonator configurations and its performance characteristics

    New resonator cavity configurations, namely, the prism resonator and unstable prism resonator, are demonstrated for the first time in an excimer (XeCl) laser with interesting and novel results. High misalignment tolerance ∼50 mrad is achieved with considerably reduced beam divergence of less than ∼1 mrad without reduction in output power capabilities of the laser. The misalignment tolerance of ∼50 mrad is a dramatic improvement of ∼25 times compared to ∼2 mrad normally observed in standard excimer laser with plane-plane cavity. Increase in depth of focus from 3 mm to 5.5 mm was also achieved in case of prism resonator configuration with an improvement of about 60%. Unstable prism resonator configuration is demonstrated here in this paper with further reduction in beam divergence to about 0.5 mrad using plano-convex lens as output coupler. The misalignment tolerance in case of unstable prism resonator was retained at about 30 mrad which is a high value compared to standard unstable resonators. The output beam spot was completely filled with flat-top profile with prism resonator configurations, which is desired for various material processing applications. Focusing properties and beam divergence in case of prism resonator have been investigated using SEM (scanning electron microscope) images. SEM images of the focused spot size (∼20 μm holes) on metal sheet indicate beam divergence of about 0.05 mrad which is about 1.5 times diffraction limit. Energy contained in this angle is thus sufficient for micro-machining applications. Clean and sharp edges of the micro-holes show high pointing stability with multiple shot exposures. Such characteristics of the excimer laser system will be extremely useful in micro-machining and other field applications

  11. Synthesis of hexagonal wurtzite Cu2ZnSnS4 prisms by an ultrasound-assisted microwave solvothermal method

    Long, Fei; Chi, Shangsen; He, Jinyun; Wang, Jilin; Wu, Xiaoli; Mo, Shuyi; Zou, Zhengguang

    2015-09-01

    Wurtzite Cu2ZnSnS4 (CZTS) hexagonal prisms were synthesized by a simple ultrasound-microwave solvothermal method. The product was characterized by XRD, FESEM, EDS, TEM, Raman and UV-vis spectrometer. The hexagonal prisms were 0.5-2 μm wide and 5-12 μm long. The PVP played an important role in the formation of the CZTS hexagonal prisms. In addition, the ultrasound-assisted microwave process was helpful for synthesis of wurtzite rather than kesterite phase CZTS. A nucleation-dissolution-recrystallization mechanism was also proposed to explain the growth of the CZTS hexagonal prisms.

  12. Effect of endocervical specimen quality on detection of Chlamydia trachomatis and on the incidence of false-positive results with the Chlamydiazyme method.

    Kellogg, J A; Seiple, J W; Murray, C L; Levisky, J S

    1990-01-01

    Duplicate endocervical swabs were collected from 1,675 patients to assess the effects of variations in specimen quality on Chlamydiazyme (Abbott Laboratories) detection of Chlamydia trachomatis and the incidence of false-positive results. One swab (at random) from each patient was tested for C. trachomatis antigen by using the standard Chlamydiazyme procedure. A 200-microliter volume of 0.9% saline was added to the other swab from each patient. After vortexing, 20 microliters was smeared on a...

  13. Comparison of optical characteristics according to shape change based on micro prism pattern

    Je, Tae-Jin; Kim, Chang-Eui; Choi, Hwan-Jin; Kang, Myoung-Chang; Jeon, Eun-chae; Park, Min-gyu; Jo, Byeong-Muk; Lee, Bong-Jae

    2015-07-01

    For high-functional optical films composed of micro patterns, the optical properties, such as the diffraction, reflection and diffusion, depend on the pattern size, shape, and arrangement. For this reason, a high precision machining process and the technology of pattern design were studied in order to increase function and efficiency. The basic shapes of micro patterns are often prisms, square pyramids and triangular pyramids. Generally, a prism pattern on a flat surface can be continuously grooved by a diamond tool same as a shape angle of the pattern. The square pyramid shape is perpendicularly machined on the prism pattern. The triangular pyramid is made with a bisection of the square pyramid along the diagonal direction. Thus, optical properties can be changed according to prism patterns produced by mechanical machining. In this paper, prism, square pyramid and triangular pyramid pattern molds were machined, and optical properties of the respective shapes were compared. The machining experiment employed an ultra-precision 4-axis planer, V-shape diamond tools, and Cu-plating molds. The machined micro patterns were replicated using UV-resin; then light-transmission measurements were performed to confirm the optical properties of the mold pattern.

  14. Fusional Vergence Detected by Prism Bar and Synoptophore in Chinese Childhood Intermittent Exotropia

    Tao Fu

    2015-01-01

    Full Text Available Purpose. To measure the changes in fusional vergence in Chinese children with intermittent exotropia (IXT and the association with the control of IXT. Methods. Ninety-two patients with IXT (8–15 years old were compared with 86 controls. Exodeviation control was evaluated using the Revised Newcastle Control Score. Angle of deviation was measured using prism and alternate cover testing at distance and near. Fusional vergence was measured using prism bar and synoptophore. This study was registered with ChiCTR-RCC-13003920. Results. Using prism bar, convergence break points were lower whereas divergence break points were higher in children with IXT at distance (P<0.001 and near (P<0.001 compared with controls. There was no significant difference in mean divergence amplitudes between the two groups when testing using a synoptophore (P=0.53. In children with IXT, the distance between recovery point and break point in both convergence (distance: P=0.02; near: P=0.02 and divergence (distance: P<0.001; near: P<0.001 was larger than controls when detected by prism bar and synoptophore (convergence: P=0.005; divergence: P=0.006. Conclusions. Children with IXT have reduced convergence amplitudes as detected by both prism bar and synoptophore.

  15. DSM Generation from ALSO/PRISM Images Using SAT-PP

    Wolff, Kirsten; Gruen, Armin

    2008-11-01

    One of the most important products of ALOS/PRISM image data are accurate DSMs. To exploit the full potential of the full resolution of PRISM for DSM generation, a highly developed image matcher is needed. As a member of the validation and calibration team for PRISM we published earlier results of DSM generation using PRISM image triplets in combination with our software package SAT-PP. The overall accuracy across all object and image features for all tests lies between 1-5 pixels in matching, depending primarily on surface roughness, vegetation, image texture and image quality. Here we will discuss some new results. We focus on four different topics: the use of two different evaluation methods, the difference between a 5m and a 10m GSD for the final PRISM DSM, the influence of the level of initial information and the comparison of the quality of different combinations of the three different views forward, nadir and backward. All tests have been conducted with our testfield Bern/Thun, Switzerland.

  16. THREE-DIMENSIONAL IGNITION AND GROWTH REACTIVE FLOW MODELING OF PRISM FAILURE TESTS ON PBX 9502

    Garcia, M L; Tarver, C M

    2006-06-20

    The Ignition and Growth reactive flow model for shock initiation and detonation of solid explosives based on triaminotirnitrobenzene (TATB) is applied to three-dimensional detonation wave propagation. The most comprehensive set of three-dimensional detonation wave propagation data is that measured using the trapezoidal prism test. In this test, a PBX 9501 (95% HMX, 2.5% Estane, and 2.5% BDNPA/F) line detonator initiates a detonation wave along the trapezoidal face of a PBX 9502 (95% TATB and 5% Kel-F binder) prism. The failure thickness, which has been shown experimentally to be roughly half of the failure diameter of a long cylindrical charge, is measured after 50 mm of detonation wave propagation by impact with an aluminum witness plate. The effects of confinement impedance on the PBX 9502 failure thickness have been measured using air (unconfined), water, PMMA, magnesium, aluminum, lead, and copper placed in contact with the rectangular faces of the prism parallel to the direction of detonation propagation. These prism test results are modeled using the two-dimensional PBX 9502 Ignition and Growth model parameters determined by calculating failure diameter and tested on recent corner turning experiments. Good agreement between experimentally measured and calculated prism failure thicknesses for unconfined and confined PBX 9502 is reported.

  17. Investigation of beam steering performances in rotation Risley-prism scanner.

    Li, Anhu; Sun, Wansong; Yi, Wanli; Zuo, Qiyou

    2016-06-13

    Rotation Risley-prism scanner appears to be the most promising solution to high-accuracy beam scanning and target tracking. In the paper, some important issues crucial to the function implementation are thoroughly investigated. First the forming law of scan blind zone relative to double-prism structural parameters is explored by a quantitative analysis method. Then the nonlinear relationship between the rotation speeds of double prisms and the change rate of beam deviation angle is presented, and the beam scan singularity is indicated as an essential factor that confines the beam scan region. Finally, the high-accuracy radial scan theory is verified to illustrate the important application owing to the high reduction ratio from the rotation angles of double prisms to the deviation angles of the emergent beam. The research not only reveals the inner mechanisms of the Risley-prism beam scanning in principle, but also provide a foundation for the nonlinear control of various beam scan modes. PMID:27410303

  18. Beyond the sensorimotor plasticity: cognitive expansion of prism adaptation in healthy individuals.

    Carine eMICHEL

    2016-01-01

    Full Text Available Sensorimotor plasticity allows us to maintain an efficient motor behavior in reaction to environmental changes. One of the classical models for the study of sensorimotor plasticity is prism adaptation. It consists of pointing to visual targets while wearing prismatic lenses that shift the visual field laterally. The conditions of the development of the plasticity and the sensorimotor after-effects have been extensively studied for more than a century. However, the interest taken in this phenomenon was considerably increased since the demonstration of neglect rehabilitation following prism adaptation by Rossetti and his colleagues in 1998. Mirror effects, i.e. simulation of neglect in healthy individuals, were observed for the first time by Colent and collaborators in 2000. The present review focuses on the expansion of prism adaptation to cognitive functions in healthy individuals during the last 15 years. Cognitive after-effects have been shown in numerous tasks even in those that are not intrinsically spatial in nature. Altogether, these results suggest the existence of a strong link between low-level sensorimotor plasticity and high-level cognitive functions and raise important questions about the mechanisms involved in producing unexpected cognitive effects following prism adaptation. Implications for the functional mechanisms and neuroanatomical network of prism adaptation are discussed to explain how sensorimotor plasticity may affect cognitive processes.

  19. All-prism achromatic phase matching for tunable second-harmonic generation.

    Richman, B A; Bisson, S E; Trebino, R; Sidick, E; Jacobson, A

    1999-05-20

    Achromatic phase matching (APM) involves dispersing the light entering a nonlinear optical crystal so that a wide range of wavelengths is simultaneously phase matched. We constructed an APM apparatus consisting of six prisms, the final dispersion angle of which was optimized to match to second order in wavelength the type I phase-matching angle of beta barium borate (BBO). With this apparatus, we doubled tunable fundamental light from 620 to 700 nm in wavelength using a 4-mm-long BBO crystal. An analogous set of six prisms after the BBO crystal, optimized to second order in second-harmonic wavelength, realigned the output second-harmonic beams. Computer simulations predict that adjustment of a single prism can compensate angular misalignment of any or all the prisms before the crystal, and similarly for the prisms after the crystal. We demonstrated such compensation with the experimental device. The simulations also indicate that the phase-matching wavelength band can be shifted and optimized for different crystal lengths. PMID:18319927

  20. Accelerator system for the PRISM based muon to electron conversion experiment

    Alekou, A; Aslaninejad, M; Barlow, R J; Hock, R Chudzinski K M; Garland, J; Jenner, L J; Kelliher, D J; Kuno, Y; Kurup, A; Lagrange, J-B; Lancaster, M; Machida, S; Mori, Y; Muratori, B; Ohmori, C; Owen, H; Pasternak, J; Planche, T; Prior, C; Sato, A; Shi, Y; Smith, S; Uchida, Y; Witte, H; Yokoi, T; C13-07-29.2

    2013-01-01

    The next generation of lepton flavor violation experiments need high intensity and high quality muon beams. Production of such beams requires sending a short, high intensity proton pulse to the pion production target, capturing pions and collecting the resulting muons in the large acceptance transport system. The substantial increase of beam quality can be obtained by applying the RF phase rotation on the muon beam in the dedicated FFAG ring, which was proposed for the PRISM project.This allows to reduce the momentum spread of the beam and to purify from the unwanted components like pions or secondary protons. A PRISM Task Force is addressing the accelerator and detector issues that need to be solved in order to realize the PRISM experiment. The parameters of the required proton beam, the principles of the PRISM experiment and the baseline FFAG design are introduced. The spectrum of alternative designs for the PRISM FFAG ring are shown. Progress on ring main systems like injection and RF are presented. The cu...

  1. Digital Beam Steering Device Based on Decoupled Birefringent Prism Deflector and Polarization Rotator

    Pishnyak, Oleg; Kreminska, Lyubov; Laventovich, Oleg D.; Pouch, John J.; Miranda, Felix A.; Winker, Bruce K.

    2004-01-01

    We describe digital beam deflectors (DBDs) based on liquid crystals. Each stage of the device comprises a polarization rotator and a birefringent prism deflector. The birefringent prism deflects the beam by an angle that depends on polarization of the incident beam. The prism can be made of the uniaxial smectic A (SmA) liquid crystal (LC) or a solid crystal such as yttrium orthovanadate (YVO4). SmA prisms have high birefringence and can be constructed in a variety of shapes, including single prisms and prismatic blazed gratings of different angles and profiles. We address the challenges of uniform alignment of SmA, such as elimination of focal conic domains. Rotation of linear polarization is achieved by an electrically switched twisted nematic (TN) cell. A DBD composed of N rotator-deflector pairs steers the beam into 2(sup N) directions. As an example, we describe a four-stage DBD deflecting normally incident laser beam within the range of +/- 56 mrad with 8 mrad steps. Redirection of the beam is achieved by switching the TN cells.

  2. Prism-patterned Nafion membrane for enhanced water transport in polymer electrolyte membrane fuel cell

    Kim, Sang Moon; Kang, Yun Sik; Ahn, Chiyeong; Jang, Segeun; Kim, Minhyoung; Sung, Yung-Eun; Yoo, Sung Jong; Choi, Mansoo

    2016-06-01

    Here, we report a simple and effective strategy to enhance the performance of the polymer electrolyte membrane fuel cell by imprinting prism-patterned arrays onto the Nafion membrane, which provides three combined effects directly related to the device performance. First, a locally thinned membrane via imprinted micro prism-structures lead to reduced membrane resistance, which is confirmed by electrochemical impedance spectroscopy. Second, increments of the geometrical surface area of the prism-patterned Nafion membrane compared to a flat membrane result in the increase in the electrochemical active surface area. Third, the vertically asymmetric geometry of prism structures in the cathode catalyst layer lead to enhanced water transport, which is confirmed by oxygen gain calculation. To explain the enhanced water transport, we propose a simple theoretical model on removal of water droplets existing in the asymmetric catalyst layer. These three combined effects achieved via incorporating prism patterned arrays into the Nafion membrane effectively enhance the performance of the polymer electrolyte membrane fuel cell.

  3. 重度黄疸干扰Abbott CD1700血液分析仪白细胞测定的探讨

    黄小燕; 戴小波

    2006-01-01

    目的 探讨重度黄疸对Abbott CD1700全自动血液分析仪(简称CD1700)测定白细胞的影响和消除方法.方法 用CD1700和手工方法分别测定42例血清胆红素>150μmol/L的标本离心洗涤前后的白细胞总数和分类结果.结果 离心洗涤前CD1700对白细胞的测定结果与手工法测定差异有显著性(P<0.01);离心洗涤后CD1700对白细胞的测定结果与手工法差异无显著性(P>0.05).结论 重度黄疸(总胆红素>150μmol/L)对CD1700测定白细胞有很大干扰,离心洗涤可作为消除其干扰的有效方法.

  4. Study on Measurement Threshold of Screening Specific Antibody of Treponema Pallidum with Abbott I 2000sr CMIA Method%雅培I2000sr CMIA法筛查梅毒螺旋体特异性抗体的测量阈值探讨

    熊继红; 张秀明; 卢建强; 阚丽娟

    2012-01-01

    目的 对梅毒螺旋体特异性抗体筛查结果进行回顾分析,探讨改变雅培I2000sr筛查梅毒螺旋体特异性抗体的Cutoff值的可能.方法 收集经雅培I2000sr检测的梅毒螺旋体特异性抗体阳性标本410例并且记录其S/CO值结果,通过TPPA法做补充试验.结果 通过TPPA法补充试验得出,410例标本中真阳性标本319例,真阳性率为77.8%,其中S/CO值1~2之间真阳性率为19.3%,2~3之间真阳性率为50.0%,3~5之间真阳性率为84.8%,5~7之间真阳性率93.9%,7~10之间真阳性率为97.5%,≥10真阳性标本为100.0%.结论 通过TPPA补充试验得出,S/CO值≥10的标本出现假阳性率为0,S/CO值<10的标本可能出现假阳性.故当仪器检测出的S/CO值≥10无需做补充试验可直接发结果.S/CO值<10时应做TPPA补充试验.此次研究有利于提高实验室筛查梅毒螺旋体特异性抗体报告质量,即可减少发出的假阳性报告.%Objective To analyze retrospectively the results of screening treponema pallidum antibody, and investigate the change of Abbott I2000sr screening of specific antibody of Treponema pallidum Cutoff values. Methods Collected Treponema pallidum antibody positive specimens by Abbott I2000sr screening from 410 patients and recorded the results of S/CO value,and then used the TPPA to do supplementary test. Results Through the TPPA method experiment,410 specimens of true positive specimens from 319 cases of true positive rate was 77. 8% ,in which the S/CO value 1~2 between true positive rate was 19. 3% ,2~3 between true positive rate was 50% ,3~5 between true positive rate was 84. 8% ,5~7 between true positive rate was 93. 9% ,from 7~10 between true positive rate was 97. 5% ,≥10 true positive specimens for 100%. Conclusion By TPPA supplementation experiment,S/CO≥10 specimens appeared a false positive rate of 0,S/CO<10 specimens would be false positive. When the S/CO≥10 without supplemental test results could be directly issued

  5. Laser Oscillator Incorporating a Wedged Polarization Rotator and a Porro Prism as Cavity Mirror

    Li, Steven

    2011-01-01

    A laser cavity was designed and implemented by using a wedged polarization rotator and a Porro prism in order to reduce the parts count, and to improve the laser reliability. In this invention, a z-cut quartz polarization rotator is used to compensate the wavelength retardance introduced by the Porro prism. The polarization rotator rotates the polarization of the linear polarized beam with a designed angle that is independent of the orientation of the rotator. This unique property was used to combine the retardance compensation and a Risley prism to a single optical component: a wedged polarization rotator. This greatly simplifies the laser alignment procedure and reduces the number of the laser optical components.

  6. Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

    LIU, Jin-Song; JI, Guang-Bin; LI, Zi-Quan; CAO, Jie-Ming; ZHENG, Ming-Bo; KE, Xing-Fei

    2007-01-01

    ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn(CH3COO)2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.

  7. DNS of heat transfer in turbulent and transitional channel flow obstructed by rectangular prisms

    Direct numerical simulation (DNS) of heat transfer in a channel flow obstructed by rectangular prisms has been performed for Reτ = 80-20, where Reτ is based on the friction velocity, the channel half width and the kinematic viscosity. The molecular Prandtl number is set to be 0.71. The flow remains unsteady down to Reτ = 40 owing to the disturbance induced by the prism. For Reτ = 30 and 20, the flow results in a steady laminar flow. In the vicinity of the prism, the three-dimensional complex vortices are generated and heat transfer is enhanced. The Reynolds number effect on the time-averaged vortex structure and the local Nusselt number are investigated. The mechanism of the heat transfer enhancement is discussed. In addition, the mean flow parameters such as the friction factor and the Nusselt number are examined in comparison with existing DNS and experimental data

  8. Bragg prism monochromator and analyser for super ultra-small angle neutron scattering studies

    Apoorva G Wagh; Sohrab Abbas; Markus Strobl; Wolfgang Treimer

    2008-11-01

    We have designed, fabricated and operated a novel Bragg prism monochromator–analyser combination. With a judicious choice of the Bragg reflection, its asymmetry and the apex angle of the silicon single crystal prism, the monochromator has produced a neutron beam with sub-arcsec collimation. A Bragg prism analyser with the opposite asymmetry has been tailored to accept a still sharper angular profile. With this optimized monochromator–analyser pair, we have attained the narrowest and sharpest neutron angular profile to date. At this facility, we have recorded the first SUSANS spectra spanning wave vector transfers ∼ 10−6 Å-1 to characterize samples containing agglomerates up to tens of micrometres in size.

  9. On possibility of quality index increase for the prism mass analyzer

    In the work the possibilities of further growth of quality index (Q-value) in the prism mass-spectrometers with focusing by energy are found. In particularly, the achromatization in mass-analyzer could be reached at a peculiarly high Q value if the incoming unit consists of the decelerating collimator lense and several accelerating refracting faces with two-dimensional field are declining of the beam to the different sides. Q value in prism mass-analyzer increase additionally if the decelerating face with high angle enlargement adjoins to the object space. An increase of Q value in 4-5 times in comparison with symmetrical prism mass-analyzer of the same overall dimensions easily reaching already at existence in the incoming electrostatic unit the one refracting face both before the lense and after it, and in the output unit only focusing lenses

  10. Instantaneous flow field above the free end of finite-height cylinders and prisms

    Highlights: • PIV measurements of the flow above the free end of finite-height bodies. • Effect of cross-sectional shape of the models on the instantaneous flow. • Small-scale structures generated by the separated shear layer were revealed. • Effect of aspect ratio on the reattachment of the separated flow on the free end. -- Abstract: The flow above the free ends of surface-mounted finite-height circular cylinders and square prisms was studied experimentally using particle image velocimetry (PIV). Cylinders and prisms with aspect ratios of AR = 9, 7, 5, and 3 were tested at a Reynolds number of Re = 4.2 × 104. The bodies were mounted normal to a ground plane and were partially immersed in a turbulent zero-pressure-gradient boundary layer, where the boundary layer thickness relative to the body width was δ/D = 1.6. PIV measurements were made above the free ends of the bodies in a vertical plane aligned with the flow centreline. The present PIV results provide insight into the effects of aspect ratio and body shape on the instantaneous flow field. The recirculation zone under the separated shear layer is larger for the square prism of AR = 3 compared to the more slender prism of AR = 9. Also, for a square prism with low aspect ratio (AR = 3), the influence of the reverse flow over the free end surface becomes more significant compared to that for a higher aspect ratio (AR = 9). For the circular cylinder, a cross-stream vortex forms within the recirculation zone. As the aspect ratio of the cylinder decreases, the reattachment point of the separated flow on the free end surface moves closer to the trailing edge. For both the square prism and circular cylinder cases, the instantaneous velocity vector field and associated in-plane vorticity field revealed small-scale structures mostly generated by the separated shear layer

  11. Development of an x-ray prism for analyzer based imaging systems

    Analyzer crystal based imaging techniques such as diffraction enhanced imaging (DEI) and multiple imaging radiography (MIR) utilize the Bragg peak of perfect crystal diffraction to convert angular changes into intensity changes. These x-ray techniques extend the capability of conventional radiography, which derives image contrast from absorption, by providing large intensity changes for small angle changes introduced from the x-ray beam traversing the sample. Objects that have very little absorption contrast may have considerable refraction and ultrasmall angle x-ray scattering contrast improving visualization and extending the utility of x-ray imaging. To improve on the current DEI technique an x-ray prism (XRP) was designed and included in the imaging system. The XRP allows the analyzer crystal to be aligned anywhere on the rocking curve without physically moving the analyzer from the Bragg angle. By using the XRP to set the rocking curve alignment rather than moving the analyzer crystal physically the needed angle sensitivity is changed from submicroradians for direct mechanical movement of the analyzer crystal to tens of milliradians for movement of the XRP angle. However, this improvement in angle positioning comes at the cost of absorption loss in the XRP and depends on the x-ray energy. In addition to using an XRP for crystal alignment it has the potential for scanning quickly through the entire rocking curve. This has the benefit of collecting all the required data for image reconstruction in a single measurement thereby removing some problems with motion artifacts which remain a concern in current DEI/MIR systems especially for living animals.

  12. A Novel Method for Heightening Sensitivity of Prism Coupler-Based SPR Sensor

    ZHANG Zhi-Wei; WEN Ting-Dun; WU Zhi-Fang

    2011-01-01

    We present a novel method for heightening the sensitivity of a prism coupler-based surface plasmon resonance (SPR) sensor. The method is based on the total reflection prism made of BK7 glass combined with the Kretschmann geometry of theattenuated total reflection (ATR) method. Compared to the conventional methods of prism coupler-based SPR the novel method provides higher semsitivity to the measurement system.Theoretical simulations show that the detetion sensitivity to the refractive index (RI) of the sensor based on the novel approach has a strong dependence on the thickness of the metal layer. The RI resolution of the sensor is predicted to be 8 × 107 refractive indox units (RIU) under the condition of optimum metal film thickness.This novel method can leave out a precision angle rotation device in the angle modulation and it is unnecessary to adjust the acceptance angle of the light detector. The principal advantage of this method over other methods of light intensity modulation based on prism coupler-based SPR is high sensitivity, expediency to measure and aplication of long distances.%@@ We present a novel method for heightening the sensitivity of a prism coupler-based surface plasmon resonance(SPR) sensor.The method is based on the total reflection prism made of BK7 glass combined with the Kretschmann geometry of theattenuated total reflection(ATR) method.Compared to the conventional methods of prism coupler-based SPR,the novel method provides higher sensitivity to the measurement system.Theoretical simulations show that the detection sensitivity to the refractive index(RI) of the sensor based on the novel approach has a strong dependence on the thickness of the metal layer.The RI resolution of the sensor is predicted to be 8 × 10-7 refractive index units(RIU) under the condition of optimum metal film thickness.This novel method can leave out a precision angle rotation device in the angle modulation and it is unnecessary to adjust the acceptance angle of

  13. Design of an Airborne Portable Remote Imaging Spectrometer (PRISM) for the Coastal Ocean

    Mouroulis, P.; vanGorp, B.; Green, R. O.; Cohen, D.; Wilson, D.; Randall, D.; Rodriguez, J.; Polanco, O.; Dierssen, H.; Balasubramanian, K.; Vargas, R.; Hein, R.; Sobel, H.; Eastwood, M.

    2010-01-01

    PRISM is a pushbroom imaging spectrometer currently under development at the Jet Propulsion Laboratory, intended to address the needs of airborne coastal ocean science research. We describe here the instrument design and the technologies that enable it to achieve its distinguishing characteristics. PRISM covers the 350-1050 nm range with a 3.1 nm sampling and a 33(deg) field of view. The design provides for high signal to noise ratio, high uniformity of response, and low polarization sensitivity. The complete instrument also incorporates two additional wavelength bands at 1240 and 1610 nm in a spot radiometer configuration to aid with atmospheric correction.

  14. Evaluation of the Performance of Routine Information System Management (PRISM framework: evidence from Uganda

    Aqil Anwer

    2010-07-01

    Full Text Available Abstract Background Sound policy, resource allocation and day-to-day management decisions in the health sector require timely information from routine health information systems (RHIS. In most low- and middle-income countries, the RHIS is viewed as being inadequate in providing quality data and continuous information that can be used to help improve health system performance. In addition, there is limited evidence on the effectiveness of RHIS strengthening interventions in improving data quality and use. The purpose of this study is to evaluate the usefulness of the newly developed Performance of Routine Information System Management (PRISM framework, which consists of a conceptual framework and associated data collection and analysis tools to assess, design, strengthen and evaluate RHIS. The specific objectives of the study are: a to assess the reliability and validity of the PRISM instruments and b to assess the validity of the PRISM conceptual framework. Methods Facility- and worker-level data were collected from 110 health care facilities in twelve districts in Uganda in 2004 and 2007 using records reviews, structured interviews and self-administered questionnaires. The analysis procedures include Cronbach's alpha to assess internal consistency of selected instruments, test-retest analysis to assess the reliability and sensitivity of the instruments, and bivariate and multivariate statistical techniques to assess validity of the PRISM instruments and conceptual framework. Results Cronbach's alpha analysis suggests high reliability (0.7 or greater for the indices measuring a promotion of a culture of information, RHIS tasks self-efficacy and motivation. The study results also suggest that a promotion of a culture of information influences RHIS tasks self-efficacy, RHIS tasks competence and motivation, and that self-efficacy and the presence of RHIS staff have a direct influence on the use of RHIS information, a key aspect of RHIS performance

  15. Optimization studies for the prism alternative oxide core, and its response to the actinide burning strategy

    The PRISM advanced liquid metal reactor is designed by General Electric in a reference solution equipped by a metal fuelled core. An alternative oxide core is studied by General Electric and ENEA in the frame of a collaboration existing since 1989. This paper deals with the ENEA contribution on the oxide solution, aimed at the core optimization both from safety parameters and fuel cycle economy points of view. Moreover, synthetic information about ENEA evaluations about the minor actinide burning capability of the PRISM oxide core are given. (author)

  16. The building and simulation of color analytical model based on prism dispersion

    Yu, Xun; Li, Xiaoming; Wang, Yawei

    2015-02-01

    The color based on prism dispersion was analyzed and the mathematical model was established in this paper. Firstly, based on Dan Bruton's research, the mapping relationship between visible wavelength and data in color map matrix was created, the geometric data of color after dispersion of the prism was processed with least squares curve fitting, then the mapping relationship between wavelength and the refractive index was built. Secondly, on the basis of the work before, the mapping relationship between wavelength and projection geometry was built. Finally, through the building of color management system, the characterization of spectral lines and colors in LAB color space would be got.

  17. PRETVORBA 3D MODELOV IZ PROGRAMA BLENDER V BINARNI ZAPIS IGRALNEGA POGONA PRISM3D

    Lušenc, Simon

    2014-01-01

    Magistrsko delo predstavi binarni zapis 3D modelov, uporabljenih v igralnem pogonu Prism3D in razvoj dodatka za pretvorbo 3D modelov s programskim orodjem Blender, ki ga tudi najprej na kratko opišemo. V nadaljevanju analiziramo zapise uporabljenih datotek, kar nam omogoči razvoj dodatka za uvoz in izvoz 3D modela, uporabljenega v igralnem pogonu Prism3D. Po predstavljeni izdelavi dodatka z vizualno primerjavo ocenimo njegovo uspešnosti in podamo možne izboljšave.

  18. PRISM, a Novel Visual Metaphor Measuring Personally Salient Appraisals, Attitudes and Decision-Making: Qualitative Evidence Synthesis.

    Tom Sensky

    Full Text Available PRISM (the Pictorial Representation of Illness and Self Measure is a novel, simple visual instrument. Its utility was initially discovered serendipitously, but has been validated as a quantitative measure of suffering. Recently, new applications for different purposes, even in non-health settings, have encouraged further exploration of how PRISM works, and how it might be applied. This review will summarise the results to date from applications of PRISM and propose a generic conceptualisation of how PRISM works which is consistent with all these applications.A systematic review, in the form of a qualitative evidence synthesis, was carried out of all available published data on PRISM.Fifty-two publications were identified, with a total of 8254 participants. Facilitated by simple instructions, PRISM has been used with patient groups in a variety of settings and cultures. As a measure of suffering, PRISM has, with few exceptions, behaved as expected according to Eric Cassell's seminal conceptualisation of suffering. PRISM has also been used to assess beliefs about or attitudes to stressful working conditions, interpersonal relations, alcohol consumption, and suicide, amongst others.This review supports PRISM behaving as a visual metaphor of the relationship of objects (eg 'my illness' to a subject (eg 'myself' in a defined context (eg 'my life at the moment'. As a visual metaphor, it is quick to complete and yields personally salient information. PRISM is likely to have wide applications in assessing beliefs, attitudes, and decision-making, because of its properties, and because it yields both quantitative and qualitative data. In medicine, it can serve as a generic patient-reported outcome measure. It can serve as a tool for representational guidance, can be applied to developing strategies visually, and is likely to have applications in coaching, psychological assessment and therapeutic interventions.

  19. PRISM, a Novel Visual Metaphor Measuring Personally Salient Appraisals, Attitudes and Decision-Making: Qualitative Evidence Synthesis

    Sensky, Tom; Büchi, Stefan

    2016-01-01

    Background PRISM (the Pictorial Representation of Illness and Self Measure) is a novel, simple visual instrument. Its utility was initially discovered serendipitously, but has been validated as a quantitative measure of suffering. Recently, new applications for different purposes, even in non-health settings, have encouraged further exploration of how PRISM works, and how it might be applied. This review will summarise the results to date from applications of PRISM and propose a generic conceptualisation of how PRISM works which is consistent with all these applications. Methods A systematic review, in the form of a qualitative evidence synthesis, was carried out of all available published data on PRISM. Results Fifty-two publications were identified, with a total of 8254 participants. Facilitated by simple instructions, PRISM has been used with patient groups in a variety of settings and cultures. As a measure of suffering, PRISM has, with few exceptions, behaved as expected according to Eric Cassell’s seminal conceptualisation of suffering. PRISM has also been used to assess beliefs about or attitudes to stressful working conditions, interpersonal relations, alcohol consumption, and suicide, amongst others. Discussion This review supports PRISM behaving as a visual metaphor of the relationship of objects (eg ‘my illness’) to a subject (eg ‘myself’) in a defined context (eg ‘my life at the moment’). As a visual metaphor, it is quick to complete and yields personally salient information. PRISM is likely to have wide applications in assessing beliefs, attitudes, and decision-making, because of its properties, and because it yields both quantitative and qualitative data. In medicine, it can serve as a generic patient-reported outcome measure. It can serve as a tool for representational guidance, can be applied to developing strategies visually, and is likely to have applications in coaching, psychological assessment and therapeutic interventions. PMID

  20. Understanding University Reform in Japan through the Prism of the Social Sciences

    Goodman, Roger

    2008-01-01

    This article looks at current university reforms in Japan through two slightly different social science prisms: how social science methodologies and theories can help us understand those reforms better and how social science teaching in universities will be affected by the current reform processes. (Contains 3 tables and 7 notes.)

  1. Economic assessment of S-prism including development and generating costs

    S-PRISM is an advanced Fast Reactor plant design that utilizes compact modular pool-type reactors sized to enable factory fabrication and an affordable prototype test of a single Nuclear Steam Supply System (NSSS) for design certification at minimum cost and risk. S-PRISM retains all of the key ALMR (advanced liquid metal reactor) design features including passive reactor shutdown, passive shutdown heat removal, and passive reactor cavity cooling that were developed under an earlier DOE program. Key factors that make S-PRISM competitive include: 1) The use of passive safety systems that eliminate the need for diesel generators and hardened active heat sinks to assure that sufficient heat is removed from the core, reactor, and containment systems following design and beyond design basis events. 2) A seven point advantage in the plant capacity factor (93 versus 86%) over a single large plant. 3) A much shorter construction schedule (45%) made possible by a modular design that allows near parallel (sequenced) construction of three relatively small, simple factory fabricated NSSSs instead of one large complex NSSS. This paper describes the approach, methods, and results of an in-depth economic assessment of S-PRISM. The assessment found that the generation cost from an NOAK plant would be less than 3 cents/kW-hr and that a design certification could be obtained in less than 15 years at a cost of 2.1 billion dollars. (authors)

  2. Two-pass-internal second-harmonic generation using a prism coupler.

    Gonzalez, D. G.; Nieh, S. T. K.; Steier, W. H.

    1973-01-01

    A dispersive quartz prism is used to couple the total second harmonic generated in both directions by an internal cavity frequency doubler. The study shows that the dispersion of air and mirror reflection phase shifts can be compensated for by a slight nonphase match condition in the doubler.

  3. Tidal Prism Modeling of Phytoplankton and Nitrogen Concentrations in Narragansett Bay and its Sub-Embayments

    A tidal prism model was developed to calculate temporal changes in the spatially averaged concentration of three state variables: phytoplankton, dissolved inorganic nitrogen, and detritus. Our main objective was to develop a model to help us understand the causes of phytoplankton...

  4. Novel laterally pumped by prism laser configuration for compact solid-state lasers

    We propose a new laser configuration in which the pump radiation is coupled into the laser crystal through a prism. The laser medium is square shaped and the prism is attached on one of its lateral sides, near one of the crystal extremities. The diode-laser fiber end is placed close to the prism hypotenuse, the pump radiation is coupled into the laser crystal through the opposite surface of the prism and propagates into the crystal through total internal reflections. This laser geometry is simple to align and permits the realization of compact diode-pumped laser systems, as well as power scaling. A diode-pumped Nd:YAG laser yielding pulses of 2.1 mJ energy under a pump with pulses of 9.9 mJ is demonstrated. The laser slope efficiency is 0.22. Furthermore, this geometry enables one to obtain passively Q-switched lasers with the saturable absorber crystal placed between the resonator high-reflectivity mirror and the laser crystal. A Nd:YAG laser, passively Q-switched by a Cr4+:YAG crystal with initial transmission T0 = 0.90, delivering laser output with a pulsed energy of 93 μJ, a duration of 26 ns and a pump threshold of 1.9 mJ, is realized in order to prove the concept. (letter)

  5. COMET and PRISM - Search for Charged Lepton Flavor Violation with Muons

    The experiment (COMET) at J-PARC to search for a charged-lepton-flavor-violating process of muon to electron conversion in a muonic atom is described. Future prospects of an experiment (PRISM) with even higher sensitivity is mentioned. On-going R and D on a highly intense muon source (MuSIC) at Osaka University is presented.

  6. Measurement of separator contact forces in ball bearings using a derotation prism

    Nypan, L. J.

    1978-01-01

    A derotation prism was used to produce a stationary image of balls deflecting a portion of the separator. Ball to cage contact forces in a 110 mm bearing at speeds to 12,000 rpm were found to be 25 N (five lb) maximum. Inner race land contact force was found to vary up to 20 N (four lb).

  7. A Novel Method for Heightening Sensitivity of Prism Coupler-Based SPR Sensor

    We present a novel method for heightening the sensitivity of a prism coupler-based surface plasmon resonance (SPR) sensor. The method is based on the total reflection prism made of BK7 glass combined with the Kretschmann geometry of theattenuated total reflection (ATR) method. Compared to the conventional methods of prism coupler-based SPR, the novel method provides higher sensitivity to the measurement system. Theoretical simulations show that the detection sensitivity to the refractive index (RI) of the sensor based on the novel approach has a strong dependence on the thickness of the metal layer. The RI resolution of the sensor is predicted to be 8 × 10−7 refractive index units (RIU) under the condition of optimum metal film thickness. This novel method can leave out a precision angle rotation device in the angle modulation and it is unnecessary to adjust the acceptance angle of the light detector. The principal advantage of this method over other methods of light intensity modulation based on prism coupler-based SPR is high sensitivity, expediency to measure and application of long distances. (fundamental areas of phenomenology(including applications))

  8. Nonlinear attractor dynamics in the fundamental and extended prism adaptation paradigm

    Frank, T.D. [Center for the Ecological Study of Perception and Action, Department of Psychology, University of Connecticut, 406 Babbidge Road, Storrs, CT 06269 (United States)], E-mail: frank@uconn.edu; Blau, Julia J.C. [Center for the Ecological Study of Perception and Action, Department of Psychology, University of Connecticut, 406 Babbidge Road, Storrs, CT 06269 (United States); Turvey, M.T. [Center for the Ecological Study of Perception and Action, Department of Psychology, University of Connecticut, 406 Babbidge Road, Storrs, CT 06269 (United States); Haskins Laboratories, New Haven, CT 06510 (United States)

    2009-03-09

    Adaptation and re-adaptation processes are studied in terms of dynamic attractors that evolve and devolve. In doing so, a theoretical account is given for the fundamental observation that adaptation and re-adaptation processes do not exhibit one-trial learning. Moreover, the emergence of the latent aftereffect in the extended prism paradigm is addressed.

  9. COMET and PRISM - Search for Charged Lepton Flavor Violation with Muons

    Kuno, Yoshitaka [Department of Physics, Osaka University, Osaka, 560-0043 (Japan)

    2012-04-15

    The experiment (COMET) at J-PARC to search for a charged-lepton-flavor-violating process of muon to electron conversion in a muonic atom is described. Future prospects of an experiment (PRISM) with even higher sensitivity is mentioned. On-going R and D on a highly intense muon source (MuSIC) at Osaka University is presented.

  10. Nonlinear attractor dynamics in the fundamental and extended prism adaptation paradigm

    Adaptation and re-adaptation processes are studied in terms of dynamic attractors that evolve and devolve. In doing so, a theoretical account is given for the fundamental observation that adaptation and re-adaptation processes do not exhibit one-trial learning. Moreover, the emergence of the latent aftereffect in the extended prism paradigm is addressed

  11. Family Perspectives: Using a Cultural Prism to Understand Families from Asian Cultural Backgrounds

    Lee, Suk-Hyang; Turnbull, Ann P.; Zan, Fei

    2009-01-01

    Educators can better serve students who come from diverse cultural backgrounds by understanding the differing cultural values of these students and their families. This article explores different cultural perspectives using a cultural prism approach, focused most specifically on the Korean and Chinese cultures. (Contains 2 tables.)

  12. Development and application of GIS-based PRISM integration through a plugin approach

    Lee, Woo-Seop; Chun, Jong Ahn; Kang, Kwangmin

    2014-05-01

    A PRISM (Parameter-elevation Regressions on Independent Slopes Model) QGIS-plugin was developed on Quantum GIS platform in this study. This Quantum GIS plugin system provides user-friendly graphic user interfaces (GUIs) so that users can obtain gridded meteorological data of high resolutions (1 km × 1 km). Also, this software is designed to run on a personal computer so that it does not require an internet access or a sophisticated computer system. This module is a user-friendly system that a user can generate PRISM data with ease. The proposed PRISM QGIS-plugin is a hybrid statistical-geographic model system that uses coarse resolution datasets (APHRODITE datasets in this study) with digital elevation data to generate the fine-resolution gridded precipitation. To validate the performance of the software, Prek Thnot River Basin in Kandal, Cambodia is selected for application. Overall statistical analysis shows promising outputs generated by the proposed plugin. Error measures such as RMSE (Root Mean Square Error) and MAPE (Mean Absolute Percentage Error) were used to evaluate the performance of the developed PRISM QGIS-plugin. Evaluation results using RMSE and MAPE were 2.76 mm and 4.2%, respectively. This study suggested that the plugin can be used to generate high resolution precipitation datasets for hydrological and climatological studies at a watershed where observed weather datasets are limited.

  13. Active control of flow around a square prism by slot jet injection

    Hacıalioğulları M.

    2013-04-01

    Full Text Available The main aim of the experimental study is to determine both the most effective injection surface and rate in order to ensure minimum drag and fluctuating forces on a square prism subjected to crossflow. All predetermined jet injection surfaces i.e. front, side, and rear, tested separately for injection ratios of IR = 0, 1, 1.5, 2 at Reynolds number of Re = 16,000. Surface pressures were measured by differential pressure transducer whereas instantaneous velocity measurements were performed by using multichannel Constant Temperature Anemometer (CTA. It was concluded that jet injection, especially from the rear surface, brought noticeable improvements to the flow characteristics of a square prism. For rear jet configuration with IR = 1.5, the mean drag coefficient (CDT¯$overline {{C_{{m{DT}}}}} $ was reduced to 79.4% and CP RMS level on side surfaces was reduced to 20% of that of the single square prism. In addition, instantaneous flow visualization photographs and Strouhal number (St distribution across the injection ratio were also presented to identify the flow patterns and underlying mechanism of drag and fluctuating force reduction of square prism with rear jet configuration.

  14. On the Orchard crossing number of prisms, ladders and other related graphs

    Feder, Elie

    2011-01-01

    This paper deals with the Orchard crossing number of some families of graphs which are based on cycles. These include disjoint cycles, cycles which share a vertex and cycles which share an edge. Specifically, we focus on the prism and ladder graphs.

  15. Prioritization Risk Integration Simulation Model (PRISM) For Environmental Remediation and Waste Management - 12097

    The PRISM (Prioritization Risk Integration Simulation Model), a computer model was developed to support the Department of Energy's Office of Environmental Management (DOE-EM) in its mission to clean up the environmental legacy from the Nation's nuclear weapons materials production complex. PRISM provides a comprehensive, fully integrated planning tool that can tie together DOE-EM's projects. It is designed to help DOE managers develop sound, risk-informed business practices and defend program decisions. It provides a better ability to understand and manage programmatic risks. The underlying concept for PRISM is that DOE-EM 'owns' a portfolio of environmental legacy obligations (ELOs), and that its mission is to transform the ELOs from their current conditions to acceptable conditions, in the most effective way possible. There are many types of ELOs - - contaminated soils and groundwater plumes, disused facilities awaiting D and D, and various types of wastes waiting for processing or disposal. For a given suite of planned activities, PRISM simulates the outcomes as they play out over time, allowing for all key identified uncertainties and risk factors. Each contaminated building, land area and waste stream is tracked from cradle to grave, and all of the linkages affecting different waste streams are captured. The progression of the activities is fully dynamic, reflecting DOE-EM's prioritization approaches, precedence requirements, available funding, and the consequences of risks and uncertainties. The top level of PRISM is the end-user interface that allows rapid evaluation of alternative scenarios and viewing the results in a variety of useful ways. PRISM is a fully probabilistic model, allowing the user to specify uncertainties in input data (such as the magnitude of an existing groundwater plume, or the total cost to complete a planned activity) as well as specific risk events that might occur. PRISM is based on the GoldSim software that is widely used for risk

  16. Preapplication safety evaluation report for the Power Reactor Innovative Small Module (PRISM) liquid-metal reactor

    This preapplication safety evaluation report (PSER) presents the results of the preapplication desip review for die Power Reactor Innovative Small Module (PRISM) liquid-mew (sodium)-cooled reactor, Nuclear Regulatory Commission (NRC) Project No. 674. The PRISM conceptual desip was submitted by the US Department of Energy in accordance with the NRC's ''Statement of Policy for the Regulation of Advanced Nuclear Power Plants'' (51 Federal Register 24643). This policy provides for the early Commission review and interaction with designers and licensees. The PRISM reactor desip is a small, modular, pool-type, liquid-mew (sodium)-cooled reactor. The standard plant design consists of dim identical power blocks with a total electrical output rating of 1395 MWe- Each power block comprises three reactor modules, each with a thermal rating of 471 MWt. Each module is located in its own below-grade silo and is co to its own intermediate heat transport system and steam generator system. The reactors utilize a metallic-type fuel, a ternary alloy of U-Pu-Zr. The design includes passive reactor shutdown and passive decay heat removal features. The PSER is the NRC's preliminary evaluation of the safety features in the PRISM design, including the projected research and development programs required to support the design and the proposed testing needs. Because the NRC review was based on a conceptual design, the PSER did not result in an approval of the design. Instead it identified certain key safety issues, provided some guidance on applicable licensing criteria, assessed the adequacy of the preapplicant's research and development programs, and concluded that no obvious impediments to licensing the PRISM design had been identified

  17. Design considerations for an unconventional infrared prism with a 90-degree ray deviation

    Akarca, Beyza; Artan, Göktuǧ G.

    2015-09-01

    In this study, the optical performance of a 90 degree prism working in the mid-wave infrared region with the purpose of carrying a beam of light from one optical system to another in an unconventional way is discussed. First, a group of mirrors is considered as a design alternative to lower the overall cost of the system. However, using mirrors greatly increases the diameter of the beam due to the rays coming from wide field of view angles. Another drawback of mirrors is that having separate mirrors requires precise alignment for the system to work at full performance which is difficult for the given application. However, these alignment issues are not valid for a single piece prism. Therefore, a single piece prism is the preferred option and has been taken into account in this study. Material selection is important, especially in the mid-wave infrared region where the index of refraction differs greatly from material to material. Silicon and Germanium are the materials preferred because of their high index of refraction and transmission characteristics. Aside from optical properties, these materials are also considered in terms of manufacturability. Also, options for the coatings to be applied to reflecting surfaces of the prism are discussed with regard to the transmission loss within the system. In order to have total internal reflection within a prism, coatings must be chosen carefully to handle transmission loss at the reflecting surfaces. All of the system parameters are examined using sequential and non-sequential modes of ZEMAX OpticStudio software.

  18. The Personalized Reminder Information and Social Management System (PRISM) Trial: Rationale, Methods and Baseline Characteristics

    Czaja, Sara J.; Boot, Walter R.; Charness, Neil; Rogers, Wendy; Sharit, Joseph; Fisk, Arthur D.; Lee, Chin Chin; Nair, Sankaran N.

    2014-01-01

    Technology holds promise in terms of providing support to older adults. To date there have been limited robust systematic efforts to evaluate the psychosocial benefits of technology for older people and identify factors that influence both the usability and uptake of technology systems. In response to these issues we developed the Personal Reminder Information and Social Management System (PRISM), a software application designed for older adults to support social connectivity, memory, knowledge about topics, leisure activities and access to resources. This trail is evaluating the impact of access to the PRISM system on outcomes such as social isolation, social support and connectivity. This paper reports on the approach used to design the PRISM system, study design, methodology and baseline data for the trial. The trial is multi-site randomized field trial. PRISM is being compared to a Binder condition where participants received a binder that contained content similar to that found on PRISM. The sample includes 300 older adults, aged 65 – 98 years, who lived alone and at risk for being isolated. The primary outcome measures for the trial include indices of social isolation and support and well-being. Secondary outcomes measures include indices of computer proficiency, technology uptake and attitudes towards technology. Follow-up assessments occurred at 6 and 12 months post-randomization. The results of this study will yield important information about the potential value of technology for older adults. The study also demonstrates how a user-centered iterative design approach can be incorporated into the design and evaluation of an intervention protocol. PMID:25460342

  19. Comparison of the Abbott m2000 RealTime CT Assay and the Cepheid GeneXpert CT/NG Assay to the Roche Amplicor CT Assay for Detection of Chlamydia trachomatis in Ocular Samples from Tanzania

    Dize, Laura; West, Sheila; Williams, James A; Van Der Pol, Barbara; Quinn, Thomas C.; Gaydos, Charlotte A.

    2013-01-01

    The GeneXpert CT/NG assay (GeneXpert) and the Abbott m2000 RealTime CT (m2000) assay were compared to Amplicor for detecting ocular Chlamydia trachomatis. Discordant specimens were tested by the Aptima CT assay. The m2000 assay sensitivity was 100% (95% confidence interval [CI], 90% to 100%), and specificity was 98.46% (95% CI, 95.2% to 99.2%); GeneXpert sensitivity was 100% (95% CI, 90% to 100%), and specificity was 100% (95% CI, 98.1% to 100%). The m2000 and GeneXpert assays appear to perfo...

  20. Comparative evaluation of the Abbott RealTime High Risk HPV test and INNO-LiPA HPV Genotyping Extra test for detecting and identifying human papillomaviruses in archival tissue specimens of head and neck cancers:

    Gale, Nina; Hošnjak, Lea; Kocjan, Boštjan; Maver Vodičar, Polona; Odar, Katarina; Poljak, Mario; Zidar, Nina

    2012-01-01

    Introduction: The Abbott RealTime is a novel real-time PCR assay designed for concurrent individual genotyping of HPV16 and HPV18 and pooled detection of 12 HPV genotypes: HPV31, 33, 35, 39, 45, 51, 52, 56, 58, 59, 66, and 68 in cervical swab specimens. In this study, the performance of RealTime for detecting HPV in formalin-fixed, paraffin-embedded tissue specimens of head and neck cancers was compared to the Innogenetics INNO-LiPA assay, which allows identification of 28 HPVs, including all...

  1. Synthesis of hexagonal wurtzite Cu2ZnSnS4 prisms by an ultrasound-assisted microwave solvothermal method

    Wurtzite Cu2ZnSnS4 (CZTS) hexagonal prisms were synthesized by a simple ultrasound-microwave solvothermal method. The product was characterized by XRD, FESEM, EDS, TEM, Raman and UV–vis spectrometer. The hexagonal prisms were 0.5–2 μm wide and 5–12 μm long. The PVP played an important role in the formation of the CZTS hexagonal prisms. In addition, the ultrasound-assisted microwave process was helpful for synthesis of wurtzite rather than kesterite phase CZTS. A nucleation–dissolution–recrystallization mechanism was also proposed to explain the growth of the CZTS hexagonal prisms. - Graphical abstract: Wurtzite Cu2ZnSnS4 hexagonal prisms were synthesized by ultrasound-microwave solvothermal method. The ultrasound-assisted microwave process and PVP were useful to the growth of CZTS. A nucleation–dissolution–recrystallization growth mechanism was also proposed. - Highlights: • Wurtzite Cu2ZnSnS4 was prepared by ultrasound-assisted microwave solvothermal method. • The wurtzite CZTS hexagonal prisms are demonstrated a band gap of 1.49 eV. • Synergistic effect of ultrasound and microwave is helpful to prepare Wurtzite CZTS. • PVP plays an important role in the formation of the CZTS hexagonal prisms. • Nucleation–dissolution–recrystallization growth mechanism of the CZTS was proposed

  2. Eu3+-doped Y2O3 hexagonal prisms: Shape-controlled synthesis and tailored luminescence properties

    In this work, Eu3+ doped Y2O3 hexagonal prisms were synthesized by a novel two-phase approach, which involves water at the bottom as aqueous phase and oleylamine in the above as oil phase. With this unique reaction system, precursors of hexagonal prisms Y4O(OH)9(NO3) were first obtained by simply varying the volume ratio of water to oleylamine. Time-dependent experiments were systematically performed to reveal the growth mechanism of the precursor. After subsequent heat treatment, these precursors transformed to Y2O3 hexagonal prisms with controlled diameters and aspect ratios varying from 4 to 19. Such a transformation is preceded via a topotactic process, as indicated by TG-DTA and mass spectra. Eventually, all Eu3+ doped Y2O3 hexagonal prisms were found to exhibit an intensive red emission at 611 nm, which corresponds to 5D0→7F2 transition of Eu3+. With varying the aspect ratio of hexagonal prisms and increasing Eu3+ concentration in Y2O3, an optimum external quantum efficiency was achieved. - Graphical abstract: In this work, Eu3+ doped Y2O3 hexagonal prisms with controlled aspect ratio from 4.4 to 19.3 were synthesized by transformation of the precursor Y4O(OH)9(NO3) hexagonal prisms from a novel two-phase reaction system. The growth mechanism of the precursor has been systematically investigated, and a topotactic phase transformation from precursors to cubic Y2O3 is for the first time put forward. By the size controlling and aspect ratio adjusting, the luminescence emission intensity as well as external quantum efficiency of Eu3+ doped Y2O3 hexagonal prisms is further tailored to show an optimum. - Highlights: • Eu3+ doped Y2O3 hexagonal prisms were synthesized by a novel two-phase approach. • Inheriting mechanism of prisms morphology from Y4O(OH)9(NO3) to Y2O3 was discussed. • Aspect ratio of prisms was tailored by the volume ratio of water to oleylamine. • Luminescence properties were optimized by adjusting aspect ratio of prisms

  3. Prism stacking faults observed contiguous to a {10-12} twin in a Mg–Y alloy

    Using transmission electron microscopy, we document, for the first time, the presence of stacking faults on the (10-10) prism planes in a fine-grained Mg–Y alloy. These prism stacking faults were found to be exclusively contiguous to a {10-12} deformation twin. In addition, the {10-12} twin contained a high density of basal plane stacking faults. Arguments are developed for the interrelationship between the stacking faults on the prism planes in the matrix and those on the basal planes in the twin

  4. A poly(dimethylsiloxane) based prism for surface plasmon resonance imaging system and its application for gas detection

    Zhang, L. L.; Chen, X.; Sun, J. H.; Cai, H. Y.; Li, H.; Chao, Y. P.; Cui, D. F.

    2013-03-01

    This paper presents a surface plasmon resonance (SPR) imaging system based on a low-cost, convenient poly(dimethylsiloxane) (PDMS) prism featured with a close contact with the gold film. Compared to conventional glass prism, both numerical simulations and experimental studies indicated a deeper but wider absorption peak with a higher coupling angle for the PDMS based prism. System repeatability was quantified by the cycled detection of helium and air, with the effect of the flow rate investigated. Furthermore, five types of gases (nitrogen, air, oxygen, hydrogen, and helium) were detected and differentiated by the SPR system, with a calculated sensitivity of 5 × 10-6 RIU.

  5. Performance of the fully automated progesterone assays on the Abbott AxSYM and the Technicon Immuno 1 Analyser compared with the radioimmunoassay progesterone MAIA

    Test performance of two automated progesterone assays available on the immunoassay analysers Abbott AxSYM and Technicon Immuno 1, respectively, was evaluated in comparison with the radioimmunoassay Progesterone MAIA. For assessment of test performance imprecision, functional sensitivity and linearity of dilution was examined. Correlation with the manual radioimmunoassay was assessed using 122 serum samples over the range 0-110 nmol/L. Imprecision studies revealed for the AxSYM Progesterone within-run CV's of 1.8-6.4% and day-to-day CV's of 3.5-9.7% (concentration range 2.3-75 nmol/L); Immuno 1 Progesterone: within-run CV's 1.0-7.3%, day-to-day CV's 2.3-7.7% (concentration range 1.2-60 nmol/L). The functional sensitivity was <1.7 nmol/L for the AxSYM Progesterone and <1.1 nmol/L for the Immuno 1 Progesterone. With the AxSYM Progesterone the mean recovery after dilution from five samples was 102% (89-107%), from one sample only 69-80% was recovered; with the Immuno 1 Progesterone the mean recovery was 95% (80-105%). Despite of a quite good overall correlation (coefficients 0.972 and 0.981) the relationship of both assays to the Progesterone MAIA significantly deviate from linearity with a considerably higher slope within the lower concentration range. The relationship between the automated assays was linear over the entire concentration range (Immuno = 1.207 * AxSYM + 1; r = 0.986). The time to first result was 20 min for the AxSYM Progesterone, 45 min for the Immuno 1 Progesterone and 90 min for the Progesterone MAIA. The evaluated progesterone assays both exhibit an excellent precision and a high degree of sensitivity. They offer a rapid and flexible method for progesterone determination which may be especially useful for the monitoring of ovarian stimulation during in-vitro fertilization. (author)

  6. Innovative Solar Tracking Concept by Rotating Prism Array

    Héctor García; Carlos Ramírez; Noel León

    2014-01-01

    Solar energy has become one of the most promising renewable energies and is the most widely used nowadays. In order to achieve an optimum performance, both photovoltaic and solar thermal applications are required to track the position of the sun throughout the day and year in the most effective way possible to avoid a high negative impact on the system efficiency. The present paper attempts to describe a novel semipassive solar tracking concentrator (SPSTC) in which, in order to track the sun...

  7. Temperature Effects on Prism-Based Surface Plasmon Resonance Sensor

    LIN Kai-Qun; WEI Lai-Ming; ZHANG Dou-Guo; ZHENG Rong-sheng; WANG Pei; LU Yong-Hua; MING Hai

    2007-01-01

    We theoretically analyse the temperature effects on a surface plasmon resonance (SPR) sensor in Kretschmann configuration. The temperature effects include the thermo-optic effect and the dispersion of thermal-optic coefficient in the dielectric along with the thermal expansion effect, phonon-electron scattering and electron-electron scattering in the metal layer. We simulate the temperature dependence of the resonance position and the sensitivity of the SPR sensor under wavelength-interrogation and angular-interrogation mode of operation and the differences are pointed out in the two modes.

  8. Thermo-optic Imbert-Fedorov effect in a prism-waveguide coupling system with silicon-on-insulator

    Tang, Tingting; Li, Chaoyang; Luo, Li; Zhang, Yanfen; Yuan, Quan

    2016-07-01

    In this paper, a prism-waveguide coupling system based on silicon-on-insulator (SOI) is revisited. We find that thermo-optic Imbert-Fedorov (TOIF) effect displays in this four-layer optical system which has not been proposed before. Furthermore, we discuss the TOIF shifts in prism/SiO2/Si/SiO2 and prism/Au/Si/SiO2 waveguides with different parameters and study the observed phenomena from physical point of view. It is shown that the maximum IF shift can achieve 140 μm in a prism/Au/Si/SiO2 waveguide which is large enough to be directly measured by the calculation results. Accordingly, TOIF shift provides a temperature control method for the enhancement and modulation of IF shift.

  9. Digital spatial wavelength domain multiplexing (DSWDM) using a prism-grating-prism (PGP) and a CMOS imager: implementation and initial testing

    Christiansen, Martin B.; Chen, Steve; Baldwin, Christopher S.; Niemczuk, John B.; Kiddy, Jason S.; Chen, Peter C.; Kopola, Harri K.; Aikio, Mauri; Suopajarvi, Pekka; Buckley, Steven G.

    2001-08-01

    A CMOS imager-based spectrometer is used to interrogate a network containing a large number of Bragg grating sensors on multiple fibers as part of a proprietary structural health monitoring system. The spectrometer uses a Prism-Grating-Prism (PGP) to spectrally separate serially multiplexed Bragg reflections on a single fiber. As a result, each Bragg grating produces a discrete spot on the CMOS imager that shifts horizontally as the Bragg grating experiences changes in strain or temperature. The reflected wavelength of the Bragg grating can be determined by finding the center of the spot produced. The use of a random addressing CMOS imager enables a flexible sampling rate. Some fibers can be interrogated at a high sampling rate while others can be interrogated at a lower sampling rate. However, the use of a CMOS camera brings several specific problems in terms of signal processing. These include a logarithmic pixel response, a low signal-to-noise ratio, the long pixel time constant, obtaining sufficient process priority for the control program, and proper selection of the window of interest. In this paper we investigate computer algorithms and hardware solutions to address these problems. We also present experimental data to validate these solutions including calibration data and initial field-testing data with 24 sensors on 4 fibers.

  10. A beam separator of a close packed prism array for low energy electron microscopy

    The electron optical properties of a beam separator made of a ''Chicane'' type close packed prism array proposed by Kolarik et al. [Optik 87 (1991) 1] have been analyzed. The total deflection angle of the illumination beam is 90 and that of the image forming beam is 0 . The second order aberrations are estimated using the eikonal method developed by Rose [Optik 51 (1978) 15] under the SCOFF approximation. It has a limitation in the analysis of the close packed prism array, because of the overlapped fringing field distributions. The magnetic field distributions of the separator are numerically calculated using the three dimensional finite difference method followed by direct ray tracing. The angles of the edge were readjusted by trial and error to get the stigmatic focus of the beam. (orig.)

  11. The Refractive Index Measurement Of Silicon Dioxide Thin Film by the Coupling Prism Method

    Refractive index of silicon dioxide thin film that doped with phosphor (SiO2:P) above the pure silicon dioxide substrate has been measured by light coupling prism method. The method principle is focusing the light on coupling prism base so that the light propagates into the waveguide layer while the reflected one forms a mode in the observation plane. The SiO2 thin film as waveguide layer has a refractive index that give the thick and refractive index relation. The He-Ne laser as light source has the wavelength λ 0,6328 μm. The refractive index measurement of the thin film with the substrate refractive index nsb = 1,47 and the thin film thick d = 2μm gives ng = 1,5534 ± 0,01136. This method can distinguish the refractive index of thin film about 6% to the refractive index of substrate

  12. Prism dispersion effects in near-guided-wave surface plasmon resonance sensors

    Refractive index dispersion causes the light line to curve. As a result it is shown that when the prism is dispersive, an additional dip in the spectral response of Surface Plasmon Resonance (SPR) sensors is observed in the Kretschmann-Raether (KR) configuration. Since the new dip evolves in the infrared (IR) region, it exhibits a high sensitivity to the analyte refractive index (RI) changes and the mode penetrates deeper into the analyte. Adding a thin dielectric layer with high refractive index on top of the metallic layer enables to control the dip location and strength. The two dips shift in opposite directions as the analyte RI changes and therefore when the spectral difference is considered as the measurand, higher RI sensitivity is obtained. The dispersion relation of two thin films bounded by two semi-infinite media is derived when the prism dispersion is considered. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Dispersive radio frequency electrometry using Rydberg atoms in a prism-shaped atomic vapor cell

    Fan, H. Q.; Kumar, S.; Kübler, H.; Shaffer, J. P.

    2016-05-01

    We introduce a method to measure radio frequency (RF) electric fields (E-fields) using atoms contained in a prism-shaped vapor cell. The method utilizes the concept of electromagnetically induced transparency with Rydberg atoms. The RF E-field induces changes in the index of refraction of the vapor resulting in deflection of the probe laser beam as it passes through the prism-shaped vapor cell. We measured a minimum RF E-field of 8.25 μ {{Vcm}}-1 with a sensitivity of ∼ 46.5 μ {{Vcm}}-1 {{Hz}}-1/2. The experimental results agree with a numerical model that includes dephasing effects. We discuss possible improvements to obtain higher sensitivity for RF E-field measurements.

  14. Hard X-ray Holographic Microscopy using Refractive Prism and Fresnel Zone Plate Objective

    Imaging holography in hard x-ray region is realized by combining imaging microscopy with a refractive prism interferometer. The prism is placed behind the back-focal-plane of objective lens in order to configure a wave-front-division interferometer, and a magnified interferogram of object image is generated at an image plane. Spatial resolution of the image hologram is essentially determined by the performance of objective lens. However, speckle noise is a serious problem for fully coherent illumination. We have tried 'asymmetric spatial coherence' to reduce the speckle noise. A synchrotron radiation light source with small coupling constant is very suitable for this purpose. The spatial coherence is sufficiently high in the vertical direction to make an interferogram, and low enough in the horizontal direction to suppress the speckle noise. Preliminary experiments at BL20XU of SPring-8 are shown

  15. Moving forward with prisms: Sensory-motor adaptation improves gait initiation in Parkinson’s disease.

    Janet Helen Bultitude

    2012-09-01

    Full Text Available It is postulated that the decreased walking speed; small, shuffling steps; and ‘freezing’ shown by patients with Parkinson’s disease could stem from an inability to tilt the body forward enough to provide sufficient forward propulsion. In two repeated-measures studies we examined whether adaptation to upward-shifting prisms, resulting in a downward after-effect, could improve gait initiation in healthy participants and patients with Parkinson’s disease. Faster forward stepping followed a brief (5 min exposure period for patients, and a longer (20 min exposure period for age-matched controls. Backward stepping was unchanged, and adaptation to downward-shifting prisms with control participants showed no effect on forward or backward stepping. These results suggest that adaptation of arm proprioception in the vertical plane may generalise to anterior-posterior postural control, presenting new possibilities for the treatment of gait disturbance in basal ganglia disorders.

  16. Experimental Evaluation of Lightweight AAC Masonry Wall Prisms with Ferrocement Layers in Compression and Flexure

    Abdel Mooty, Mohamed

    2012-05-01

    An experimental program is designed to evaluate the performance of lightweight autoclaved aerated concrete masonry wall strengthened using ferrocement layers, in a sandwich structure, under in-plane compression and out-of-plane bending. The 25 mm thick ferrocement mortar is reinforced with steel welded wire mesh of 1 mm diameters at 15 mm spacing. Different types of shear connectors are used to evaluate their effect on failure loads. The effect of different design parameters on the wall strength are considered including wall thickness, mortar strength, and type and distribution of shear connectors. A total of 20 prisms are tested in compression and 5 prisms are tested under bending. The proposed ferrocement strengthening technique is easy to apply on existing wall system and results in significant strength and stiffness enhancement of the tested wall specimens. © (2012) Trans Tech Publications.

  17. Femtosecond laser direct writing of monocrystalline hexagonal silver prisms

    Bottom-up growth methods and top-down patterning techniques are both used to fabricate metal nanostructures, each with a distinct advantage: One creates crystalline structures and the other offers precise positioning. Here, we present a technique that localizes the growth of metal crystals to the focal volume of a laser beam, combining advantages from both approaches. We report the fabrication of silver nanoprisms—hexagonal nanoscale silver crystals—through irradiation with focused femtosecond laser pulses. The growth of these nanoprisms is due to a nonlinear optical interaction between femtosecond laser pulses and a polyvinylpyrrolidone film doped with silver nitrate. The hexagonal nanoprisms have bases hundreds of nanometers in size and the crystal growth occurs over exposure times of less than 1 ms (8 orders of magnitude faster than traditional chemical techniques). Electron backscatter diffraction analysis shows that the hexagonal nanoprisms are monocrystalline. The fabrication method combines advantages from both wet chemistry and femtosecond laser direct-writing to grow silver crystals in targeted locations. The results presented in this letter offer an approach to directly positioning and growing silver crystals on a substrate, which can be used for plasmonic devices.

  18. A scalable expressive ensemble learning using Random Prism: a MapReduce approach

    Stahl, Frederic; May, David; Mills, Hugo; Bramer, Max; Gaber, Mohamed Medhat

    2015-01-01

    The induction of classification rules from previously unseen examples is one of the most important data mining tasks in science as well as commercial applications. In order to reduce the influence of noise in the data, ensemble learners are often applied. However, most ensemble learners are based on decision tree classifiers which are affected by noise. The Random Prism classifier has recently been proposed as an alternative to the popular Random Forests classifier, which is based on decision...

  19. Improvement of Mental Imagery after Prism Exposure in Neglect: A Case Study

    Gilles Rode; Yves Rossetti; Ling Li; Dominique Boisson

    1999-01-01

    Previous work has shown that various symptoms of unilateral neglect, including the pathological shift of the subjective midline to the right, may be improved by a short adaptation period to a prismatic shift of the visual field to the right. We report here the improvement of imagined neglect after prism exposure in a patient with a left unilateral neglect. Despite a strong neglect observed for mental images as well as for conventional tests, the mental evocation of left-sided information from...

  20. What controls landward vergence of the accretionary prism offshore northern Sumatra?

    Frederik, M. C. G.; Gulick, S. P. S.; Austin, J. A., Jr.; Bangs, N. L.; Udrekh, U.

    2014-12-01

    The accretionary prism offshore northern Sumatra consists of steep outer slopes (5-12°), and a plateau ~100-120 km wide comprised of anticlinal folds of 2-16 km wavelength seaward of a steep slope adjacent to the Aceh (forearc) Basin. Our study area, 1-7°N and 92-97°E, covers the entire forearc from northwest of Aceh to west of Simeulue Island. Five 2D MCS seismic profiles transecting the prism from the Sunda Trench to the Aceh Basin, along with multibeam data, have been used to investigate wedge morphology and structure. Analysis of fold vergence along the profiles and areal classification of the predominant vergence reveal three structural zones: 1) predominantly landward-vergent folds near the Sunda Trench, 2) predominantly seaward-vergent folds near the Aceh Basin, and 3) mixed vergent folds between those two zones. Extensive landward vergence is uncommon in accretionary prisms worldwide. One explanation is the existence of a backstop with a seaward dipping edge, such that overlying younger sediments accreted to the prism form landward-vergent folds. We propose a backstop geometry that extends from under the Aceh Basin to under the mixed vergence zone, based on the observed structural zones and published velocity models of this margin. The backstop may consist either of older accreted sediment or the granitic Sunda Block. With the existence of a strong inner wedge acting as a backstop, together with suspected indurated sediments forming the landward vergence zone, rupture during major subduction zone earthquakes nucleating under the forearc basin or central plateau high can propagate farther seaward toward the Sunda Trench and displace greater volumes of water than a more landward rupture, yielding more hazardous tsunami. Using bathymetric data of before and after the 2004 earthquake, we are now testing the hypothesis that maximum slip occurs near the trench. These results will be presented.

  1. PRISM [Power Reactor Inherently Safe Module] design concept enhances waste management

    PRISM, a modular advanced liquid metal reactor (ALMR), has been designed conceptually by GE under the US Department of Energy sponsorship. The concept design and analyses have been primarily focused on passive safety and improved construction and operating costs. Significantly, the unique design of multiple modules and features of PRISM enhance waste management over conventional reactor systems. This paper provides an overview of PRISM of these enhancements. Inherent to the ALMR's, the sodium coolant precludes crud buildup on reactor surfaces and in components and waste for disposal. Preliminary evaluations indicate this fundamental feature results in factors of 2-4 less waste volume and 2-3 orders of magnitude less curies per megawatt-electric for ultimate disposal. For example, the tap designed for sodium cleanup is expected to be exchanged only once every thirty years. Also, inherent to ALMR's, burning waste actinides and selected fission products to preclude their accumulation and burial is very attractive. The hard neutron spectrum of ALMR burns the actinides efficiently and is not poisoned by the actinides and fission products. The modular design of PRISM components (and the fuel cycle equipment) permit replacement without expensive and potentially hazardous volume reduction. For example, the functional components of the reference electromagnetic pump and IHK can be removed intact for waste disposal. Although development of the reference metal fuel is not completed, it is estimated that (low-level) waste from recycle of the fuel will result in significantly less volume than would be generated by aqueous recycle of oxide fuel. 6 refs., 10 figs

  2. Prism adaptation reverses the local processing bias in patients with right temporo-parietal junction lesions

    Bultitude, Janet H.; Rafal, Robert D.; List, Alexandra

    2009-01-01

    Lesions to the right temporo-parietal cortex commonly result in hemispatial neglect. Lesions to the same area are also associated with hyperattention to local details of a scene and difficulty perceiving the global structure. This local processing bias is an important factor contributing to neglect and may contribute to the higher prevalence of the disorder following right compared with left hemisphere strokes. In recent years, visuomotor adaptation to rightward-shifting prisms has been intro...

  3. HEATING OF BLANK IN FORM OF PRISM IN ACCORDANCE WITH TECHNOLOGICAL LIMITATIONS

    V. B. Kovalevsky

    2014-12-01

    Full Text Available The paper considers a problem on optimum heating control of a blank in the form of prism under complicated conditions of heat-transfer in accordance with criteria of gas consumption minimization, decarburized layer and scaling. Numerical algorithm of the problem solution and examples are given in the paper. A new technology of the flame furnace operation has been developed in the paper. 

  4. Fluid circulation in the depths of accretionary prisms: an example of the Shimanto Belt, Kyushu, Japan

    Raimbourg, Hugues; Vacelet, Maxime; Ramboz, Claire; Famin, Vincent; Augier, Romain; Palazzin, Giulia; Yamaguchi, Asuka; Kimura, Gaku

    2015-01-01

    Accretionary prisms constitute ideal targets to study fluid circulation and fluid-rock interactions at depths beyond the reach of active margin deep drilling. The highest-grade rocks from the Shimanto Belt on Kyushu were buried under 3-5 kbars at ~ 300°C (Toriumi and Teruya, 1988). They contain abundant quartz veins, formed throughout burial and exhumation and variably affected by brittle and ductile deformation.Cathodoluminescence (CL) reveals the existence of two distinct types of quartz, c...

  5. A study on transmitted intensity of disturbance for air-spaced Glan-type polarizing prisms

    Fan, Ji-Yang; Li, Hong-Xia; Wu, Fu-Quan

    2002-01-01

    We study theoretically and experimentally the transmission intensity of polarized light through the air-spaced Glan-type polarizing prsims. It is found that the variation of the transmitted intensity with the rotation angle deviates from Malus Law, exhibiting a cyclic fluctuation with the rotation angle. The occurrence of the disturbance is explained by the use of an argument based on the interference effect produced from the air-gap in the prisms. The theoretcal results are well agreed with ...

  6. High-resolution NO₂ remote sensing from the Airborne Prism EXperiment (APEX) imaging spectrometer

    Popp, C; Brunner, D.; Damm, A.; Van Roozendael, M.; Fayt, C.; Buchmann, B

    2012-01-01

    We present and evaluate the retrieval of high spatial resolution maps of NO2 vertical column densities (VCD) from the Airborne Prism EXperiment (APEX) imaging spectrometer. APEX is a novel instrument providing airborne measurements of unique spectral and spatial resolution and coverage as well as high signal stability. In this study, we use spectrometer data acquired over Zurich, Switzerland, in the morning and late afternoon during a flight campaign on a cloud-free summer d...

  7. High-Order Optimal Edge Elements for Pyramids, Prisms and Hexahedra

    Bergot, Morgane; Duruflé, Marc

    2013-01-01

    Edge elements are a popular method to solve Maxwell's equations especially in time-harmonic domain. However, when non-affine elements are considered, elements of the Nedelec's first family are not providing an optimal rate of the convergence of the numerical solution toward the solution of the exact problem in H(curl)-norm. We propose new finite element spaces for pyramids, prisms, and hexahedra in order to recover the optimal convergence. In the particular case of pyramids, a comparison with...

  8. ANALISIS PENGUKURAN KINERJA PERUSAHAAN DENGAN METODE PERFORMANCE PRISM DAN SCORING OBJECTIVE MATRIX (OMAX) PADA PT. BPAS

    Adianto .; M. Agung Saryatmo; Ardi S. Gunawan

    2014-01-01

    Kinerja merupakan suatu tampilan keadaan secara utuh atas perusahaan selama periode waktu tertentu. PT. BPAS adalah sebuah perusahaan yang bergerak dalam bidang industri papan semen. Selama ini sistem pengukuran kinerja di PT. BPAS belum merepresentasikan kinerja organisasi secara komprehensif dan integratif. Oleh sebab itu pengukuran kinerja perlu dilakukan pada PT. BPAS dengan menggunakan metode Performance Prism dan Scoring OMAX agar dapat meningkatkan kinerja perusahaan secara maksimal. P...

  9. High-resolution NO₂ remote sensing from the Airborne Prism EXperiment (APEX) imaging spectrometer

    Popp, C; Brunner, Dominik; DAMM Alexander; M. Van Roozendael; C. Fayt; B. Buchmann

    2012-01-01

    We present and evaluate the retrieval of high spatial resolution maps of NO₂ vertical column densities (VCD) from the Airborne Prism EXperiment (APEX) imaging spectrometer. APEX is a novel instrument providing airborne measurements of unique spectral and spatial resolution and coverage as well as high signal stability. In this study, we use spectrometer data acquired over Zurich, Switzerland, in the morning and late afternoon during a flight campaign on a cloud-free summer day in June 2010. N...

  10. Existence of a Diffusion Length in a Finite Prism of Pure Moderator

    An exact integral transport equation is derived for the neutron flux in a finite prism of pure moderator. Assuming that the prism is infinite in the z-direction, a trial solution expi(-vz) is inserted, and an eigenvalue problem for v, the spatial relaxation constant, results. The eigenvalue v is studied as a function of the absorption and dimensions of the prism. It is shown that the discrete eigenvalues are bounded by Σmin, and that a minimum dimension exists below which a diffusion length can no longer be found. This result is much more restrictive than the maximum absorption theorem of Comgold, and the minimum dimension of the prism is shown to correspond to transverse bucklings of 10-3 cm2 for beryllium, and 1.5 x 10-3cm2 for graphite, at 300°K. For poisoned and low-temperature moderators these values will be even smaller. The angular distribution of the neutrons in the moderator has been calculated perpendicular and parallel to the axis, and it is found that a marked anisotropy of the spectrum exists, particularly in the neighbourhood of the Bragg cut-off. On the basis of degenerate kernel approximation to the scattering process, it is shown that when the system is such that no diffusion length exists, then the asymptotic transverse flux shape is no longer of the cosine type, but becomes progressively flatter as the distance from the source increases. This is due to an increase in the proportion of cold neutrons which have longer mean free paths than the average. The well-known cold neutron filtering effect can be explained in terms of this phenomenon. The results obtained from the present analysis are in quantitative agreement with recent experiments performed by De Juren and Swanson. (author)

  11. PRISM: a web server and repository for prediction of protein–protein interactions and modeling their 3D complexes

    Baspinar, Alper; Cukuroglu, Engin; Nussinov, Ruth; Keskin, Ozlem; Gursoy, Attila

    2014-01-01

    The PRISM web server enables fast and accurate prediction of protein–protein interactions (PPIs). The prediction algorithm is knowledge-based. It combines structural similarity and accounts for evolutionary conservation in the template interfaces. The predicted models are stored in its repository. Given two protein structures, PRISM will provide a structural model of their complex if a matching template interface is available. Users can download the complex structure, retrieve the interface r...

  12. Measurement of Stress-Strain Response of A Rammed Earth Prism In Compression Using Fiber Bragg Grating Sensors

    Prasad, Guru AS; Anitha, M.; Rao, Nanjunda KS; S. Asokan

    2011-01-01

    A comparative study of strain response and mechanical properties of rammed earth prisms, has been made using Fiber Bragg Grating (FBG) sensors (optical) and clip-on extensometer (electro-mechanical). The aim of this study is to address the merits and demerits of traditional extensometer vis-à-vis FBG sensor; a uni-axial compression test has been performed on a rammed earth prism to validate its structural properties from the stress - strain curves obtained by two different methods of measurem...

  13. Optimization of the laser beam propagation conditions in the prism stretcher of THL-100 multiterawatt laser system

    Ivanov, Mikhail Vladimirovich; Alekseev, Sergey Vladimirovich; Ivanov, Nikolay Georgievich; Losev, Valery Fedorovich

    2015-01-01

    The influence of the optical inhomogeneities effect of the prism stretcher elements on the spatial, angular and spectral parameters of the transmitted radiation and the degree of change in the phase aberrations of the laser beam during its propagation in the stretcher are studied. It is shown that the prism material does not allow transmitting of a required diameter of 75 mm without linear distortions of the beam. The maximum intensity and beam diameter allowing to amplify the picosecond puls...

  14. Approximation of H(div) with High-Order Optimal Finite Elements for Pyramids, Prisms and Hexahedra

    Bergot, Morgane; Duruflé, Marc

    2013-01-01

    Classical facet elements do not provide an optimal rate of convergence of the numerical solution toward the solution of the exact problem in H(div)-norm for general unstructured meshes containing hexahedra and prisms. We propose two new families of high-order elements for hexahedra, triangular prisms and pyramids that recover the optimal convergence. These elements have compatible restrictions with each other, such that they can be used directly on general hybrid meshes. Moreover the H(div) p...

  15. Diamond-coated ATR prism for infrared absorption spectroscopy of surface-modified diamond nanoparticles

    Linear antenna microwave chemical vapor deposition process was used to homogeneously coat a 7 cm long silicon prism by 85 nm thin nanocrystalline diamond (NCD) layer. To show the advantages of the NCD-coated prism for attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) of nanoparticles, we apply diamond nanoparticles (DNPs) of 5 nm nominal size with various surface modifications by a drop-casting of their methanol dispersions. ATR-FTIR spectra of as-received, air-annealed, plasma-oxidized, and plasma-hydrogenated DNPs were measured in the 4000–1500 cm−1 spectral range. The spectra show high spectral resolution, high sensitivity to specific DNP surface moieties, and repeatability. The NCD coating provides mechanical protection against scratching and chemical stability of the surface. Moreover, unlike on bare Si surface, NCD hydrophilic properties enable optically homogeneous coverage by DNPs with some aggregation on submicron scale as evidenced by scanning electron microscopy and atomic force microscopy. Compared to transmission FTIR regime with KBr pellets, direct and uniform deposition of DNPs on NCD-ATR prism significantly simplifies and speeds up the analysis (from days to minutes). We discuss prospects for in situ monitoring of surface modifications and molecular grafting.

  16. Possibilities of magnet prism β-spectrometer application in on-line experiments

    The main attention is paid to works with particle beam in up-to-date nuclear investigations. The application of magnet prism β-spectrometer for works in 'on-line' experiments is considered in this article. The source chamber and detector chamber are distanted from each other on great distance (4 m) and are out of operation field of spectrometer. There is a reliable defence of operating field of device from external parasitic fields by the magnetic screens system. The additional advantage is a factor that source (target) and detector could replacing in specific directions about few centimetres during the device operating. The main β-spectroscopic performances of device are compared with Grenoble spectroscopic complex. The liner depression of prism spectrometer account for from 3,6 up to 6 m; light force - from 2·10-4 up to 6·10-4 up to 4π; operating resolving power - 0,02-0,05% by impulse. Investigation range is from several keV up to 3 MeV. There are all opportunities for installing of the on-line magnetic prism spectrometer on the U-150 accelerator and the WWR-K reactor. Spectrometer application in 'on-line' experiments gives possibility to obtain more wide information. 4 refs

  17. Standard neutron fields in graphite prism with Ra-α-Be source

    Neutron slowing-down and space-energy distribution of neutron flux in graphite prism with Ra-α-Be source were investigated experimentally, numerically and theoretically. Recent measurement and numerical experiment based on Monte Carlo calculations were carried out for the purpose of determining detailed space and energy distribution of neutron flux in the prism. Measurement of two-group neutron flux distribution along the central vertical axis of graphite prism was performed by irradiation of golden foils with cadmium covers and without them. Gamma and beta activities of foils were measured absolutely by using coaxial semiconductor germanium gamma detector and dual gas proportional alpha/beta detector, respectively. Starting from the results of numerical Monte Carlo experiment, neutron ages that enable analytical representation of neutron flux in broad energy intervals were determined. For the six chosen broad energy intervals the very good agreement between numerical experiment and Fermi age theory results was achieved with three age groups, corresponded source fractions and neutron ages. (author)

  18. Polarization properties in a prism laser gyro with mechanical dither bias

    Theoretical analysis and experimental research on the polarization properties of output light in gyro are carried out to investigate the phenomenon that the amplitude of an output voltage signal is modulated by dither bias in laser gyros consisting of totally reflecting prisms. Taking the effect of prism stress birefringence into account, an analytical formula of the output light intensity in the gyro and the relationship between the polarization parameter and the amplitude modulation of the output signal are obtained and discussed. For the first time, the polarized power value of the output light is adopted as a basis to estimate the output signal amplitude fading extent of laser gyros. Experimental results demonstrate that when the value of polarized power of output light is below 25.5% of that in ideal static case, the standard error is over 0.0337 dBm, and the displacement extent of the prism is higher than 53% of the radius of the beam waist in the gyro cavity, the amplitude modulation extent of gyro output signal can reach up to 16%, which badly influences the measurement accuracy of the laser gyro. Using this polarized power detecting measurement method can repair the gyro immediately during its fabrication process, improve the testing and production efficiency and shorten the product development cycle. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  19. Research on refractive index of optical cement used in Glan-Thompson prisms

    Haifeng Wang; Fuquan Wu; Hailong Wang; Jing Wang; Shan Zhang

    2007-01-01

    The influence of the refractive index n2 of optical cement on the structure angle, field angle, and transmission of Glan-Thompson prism has been studied in detail. The results show that the structure angle will increase with the decrease of n2 under the condition of the largest field angle. Thus, the ratio of length to width (L/A) of the prism will decrease, which means more materials can be saved. When the value of L/A is 3.0 or 2.5 in the routine design, the field angle will firstly increase and then decrease with the increment of n2. Two routine designs with the n2 values of 1.47 and 1.45 have the optimal field angle. In addition, n2 also has great influence on light intensity transmittance of the prism. Considering all these factors, it will be the best choice with L/A=2.5 and n2 = 1.45 - 1.46.

  20. Deformation-induced diagenesis and microbial activity in the Nankai accretionary prism

    Famin, V.; Andreani, M.; Boullier, A. M.; Raimbourg, H.; Magnin, V.

    2014-12-01

    We performed a microscopic and chemical study of diagenetic reactions in deformation microstructures within deep mud sediments from the Nankai accretionary prism (SW Japan) collected during IODP Expedition 315. Our study reveals that deformation microstructures localize the crystallization of pyrite, a diagenetic reaction also found in large megasplay faults of the prism. Textural observation shows that pyrite crystallization is synchronous of the sediment deformation. The framboidal shape of pyrite crystals, the barium depletion and the strong arsenic enrichment observed in deformation microstructures compared with the sediment matrix, suggest that pyrite crystallization is mediated by the proliferation of anoxic archae. During scientific drilling expeditions IODP 315, 316 and 319, microbial life has been evidenced at depths of up to 800 m below the sea floor by the presence of biogenic methane and sulfate reducers in sediments. We suggest that deformation structures localize microbial proliferation because the fracturing of silicate minerals produces hydrogen, a necessary compound for bacteria under anoxic conditions. Bacteria proliferate as long as active deformation supplies hydrogen, and vanish when the deformation stops. The development of bacteria in deformation structures impacts our mechanical understanding of fault zones in accretionary prisms: Firstly, bacterial activity converts carbon from organic matter and hydrogen into methane and/or water, which may alter the fluid budget of fault zones and the recurrence of dynamic ruptures in megathrusts. Secondly, the abundance of bacteria could be used to recognize active fault zones from inactive ones in drilling cores.

  1. ONE-DIMENSIONAL LIGHT BEAM WIDENING USING PRISMS FOR INCREASE OF SPECTROMETER SPECTRAL RESOLUTION AND ANGULAR DISPERSION

    I. M. Gulis

    2016-01-01

    Full Text Available The increase of angular dispersion and slit resolution limit of grating spectrometers by means of variation of grating parameters is limited by its period and allowable order of diffraction. The special solutions (echelle, holographic, immersion gratings are acceptable in a limited parameter range and are technologically complex in fabrication, thus hardly applicable to instruments of mass production. We propose to decrease slit resolution limit by one-dimensional beam widening in dispersion plane by means of passing it through oblique prism before incidence onto diffraction grating. The increase of angular dispersion can be achieved by narrowing of dispersed beams after grating while passing through other oblique prism. We prove that slit resolution limit in such a system changes approximately as multiplied by angular magnification of the first prism (that is less than 1 times. Also angular dispersion changed approximately as multiplied by angular magnification of the second prism. The Fresnel reflection from the faces of prisms is analyzed. Accounting for that factor gives the increase of resolution about 1,4–1,6 times without loss of light (and can be 2 and more times while using anti-reflective coating. The proposed method is different from the similar ones first of all by its simplicity because it uses simple optical elements – plane reflective grating and thin prisms. It can be applied to amend the analytical characteristics of dispersive spectrometers, first of all the small-sized ones. 

  2. Implications of Faulting Styles in the Outer Wedge of the Nankai Accretionary Prism, Japan

    Kington, J. D.; Tobin, H. J.

    2009-12-01

    The Nankai Trough, Japan near Kumano Basin displays a well developed accretionary prism with a major out-of-sequence “megasplay” thrust separating the recently active outer wedge of the prism from the forearc basin deposits. While not in the seismogenic zone, this thrust is thought to play a key role in tsunamigenesis by transferring deeper coseismic slip to the seafloor. Understanding the development of this fault requires a detailed understanding of the kinematics and structure of the outer wedge of the accretionary prism. The outer wedge of the Nankai accretionary prism consists of an in-sequence series of landward-dipping thrusts that record two directions of shortening. Based on 3D reflection seismic, older thrusts and their associated folds strike ~225 degrees, almost exactly perpendicular to plate motion in the area, which has an azimuth of 314 (Zang, et al, 2002). The youngest thrusts, including the megasplay at the rear of the outer wedge, trend 240-245 degrees, subparallel to the margin in the area, which trends roughly 250. This suggests two possibilities: 1) the older thrusts formed during a period of relatively strong coupling with the subducting slab, perhaps due to highly irregular oceanic basement topography which has since been subducted, or 2) the trench margin had been previously indented by a subducted seamount and has since been rebuilding. In addition, two right lateral tear faults with offsets of approximately 1km cut the fold-thrust belt of the outer wedge. These faults cleanly offset the fold hinge of faults striking perpendicular to plate motion and interact with the oldest faults that strike parallel to the margin, implying that their timing is coincident with the change in shortening direction. Therefore, these tear faults may accommodate along-strike changes in the taper angle of the accretionary prism following the subduction of irregular basement topography. Significant normal faulting within the seismically imaged portion of the

  3. PERANCANGAN DAN IMPLEMENTASI SISTEM PENGUKURAN KINERJA DENGAN METODE PERFORMANCE PRISM (Studi Kasus pada Hotel X

    Iwan Vanany

    2004-01-01

    Full Text Available This article described a result of research design of performance measurement system in hotel business with Performance Prism Model. As long as, performance measurement system at hotel X not yet representatived organization performance according to comprehensif and integrated. Because of needed redesign performance measurement system with new model. From the objective condition of hotel X, Performance Prism model more representative than others. The result of design described that stakeholder in hotel X such as: customer, employee, supplier, owner and investor, and regulator and community. From the performance measurement system design are obtained 36 types Key Performance Indicator (KPI such as: 6 KPI of customer, 9 KPI of staff manajerial, 9 KPI of staff operational, 4 KPI of supplier, 3 KPI of investor, and 5 KPI of regulator & community. Result of implementation performance measurement system with scoring system indicates that the amount of scor current performance indicator is 50,75%. Result of measurement can be based management act evaluation and choice planning improvement organization and all Stakeholder requirements must be request. Abstract in Bahasa Indonesia : Artikel ini menguraikan hasil penelitian perancangan sistem pengukuran kinerja pada sebuah perusahaan dalam bisnis hotel dengan model Performance Prism. Selama ini, sistem pengukuran kinerja di Hotel X belum merepresentasikan kinerja organisasi secara komprehensif dan integratif. Oleh karena itu, perlu dilakukan perancangan kembali sistem pengukuran kinerjanya. Dari kondisi objektif hotel X, model yang tepat digunakan adalah model Performance Prism dibanding model lain. Hasil rancangan menunjukkan bahwa stakeholder hotel X meliputi: konsumen, tenaga kerja, supplier, pemilik/investor, serta pemerintah dan masyarakat sekitar lingkungan hotel. Sistem pengukuran kinerja memuat 36 KPI yang meliputi 6 KPI konsumen, 9 KPI staff manajerial, 9 KPI staff operasional, 4 KPI supplier, 3

  4. Mercury contamination from mine and natural sources in Harley Gulch, downstream from the Abbott and Turkey Run Mercury Mines, Lake County, California

    Hothem, R. L.; Rytuba, J. J.; Goldstein, D.; Brussee, B.

    2011-12-01

    The Abbott and Turkey Run Mercury (Hg) mine area in central California has released Hg tailings into the Harley Gulch watershed since 1862. Harley Gulch flows into Cache Creek which is a significant source of Hg into San Francisco Bay Delta. Thermal mine water effluent emanating from the Turkey Run adit flows into the upper part of the watershed. Despite remediation efforts, Hg tailings and enriched sediment remain in the Harley Gulch wetlands and in the creek downstream from the mine area. Water, sediment, and biota have been sampled from below the mine area to 15 km downstream to the confluence with Cache Creek in order to assess the impact of Hg on water quality and biota. Two previously unrecognized natural sources of Hg in the watershed are connate groundwater with elevated levels of Hg, and biogenic sediment composed of phytoplankton that accumulates in the upper part of the watershed during the dry season. The connate groundwater source contains isotopically-heavy Mg-Ca-Cl-CO3-SO4 water that has elevated concentrations of Ba, W, Ti, and Hg. This water first enters Harley Gulch in the central part of the wetland immediately downstream from the mine area and continues to contribute water downstream for a distance of 1.5 km. It is both chemically and isotopically distinct from the thermal mine water effluent from the Turkey Run adit. The biogenic source consists of blooms of phytoplankton that accumulate to a thickness of up to 0.2 m. Phytoplankton have a large bioaccumulation factor of Hg and monomethyl mercury (MMeHg) that results in a high concentrations of Hg and MMeHg (Hg: 5-25 μg/g, MMeHg 5.2 ng/g) in the biogenic sediment. The tan biogenic sediment at the surface consists of living diatoms and below it is a layer of black reduced biogenic sediment consisting of diatom fragments with micron- to submicron-sized FeS, HgS, and barite grains. Sulfate-reducing bacteria reduce sulfate to sulfide in the pore waters of the biogenic sediment that reacts with

  5. Prediction of the position of coal particles in an air dense medium fluidized bed system

    Prusti Pallishree; Sahu Ashok K.; Biswal Surendra K

    2015-01-01

    An air dense medium fluidized bed separator (ADMFBS) is used for dry beneficiation of coal using ultra-fine magnetite particles as a pseudo-fluid medium. In this process, the coal particle gains additional weight due to coating on its surface and deposition at dead zone area by fine magnetite particles. Hence, the effective density of coal particle increases and the position of coal particle changes accord-ingly. In this work, an attempt was made to predict the position of coal particle in non-bubbling condition dense medium fluidized bed system. Coal particles of different shape such as cubical, rectangular prism, spherical and triangular prism with different projected area and density were used. The results show that the position of coal particle in air dense medium fluidized bed follows descending order with respect to the increase of density, projected area of coal particle and different shapes (i.e., triangular prism, cubical, rectangular prism and spherical). Empirical mathematical correlations were developed to predict the position of coal particle.

  6. Positive Organizational Culture as a new trend in cross-cultural management. Basic concepts

    Mazur, Kamila

    2010-01-01

    The article presents the most popular concepts in intercultural management. So far, the majority of these concepts has focused on the study of differences arising from national foreign cultures and on the elimination of conflicts arising from these differences. A new perspective in the concept of intercultural management is looking at it through the prism of the positive values which create Positive Organizational Culture. This perspective assumes the Positive Organizational Potential. The la...

  7. Model and Visualization of Ray Tracing using JavaScript and HTML5 for TIR Measurement System Equipped with Equilateral Right Angle Prism

    Viridi, Sparisoma; Hendro

    2013-01-01

    Trace of ray deviated by a prism, which is common in a TIR (total internal reflection) measurement system, is sometimes difficult to manage, especially if the prism is an equilateral right angle prism (ERAP). The point where the ray is reflected inside the right-angle prism is also changed as the angle of incident ray changed. In an ATR (attenuated total reflectance) measurement system, range of this point determines size of sample. Using JavaScript and HTML5 model and visualization of ray tr...

  8. Arctic PRISM Shorebird Location and Plot Survey Geodatabase. U.S. Fish and Wildlife Service, Division of Migratory Bird Management (2012).

    Arctic Landscape Conservation Cooperative — This dataset consists of shorebird surveys conducted as part of the Program for Regional and International Shorebird Monitoring (PRISM). This dataset was derived...

  9. Machining characteristics of complex prism pattern on electroplated roll by copper

    Tae-Jin JE; Sang-Cheon PARK; Kang-Won LEE; Yeong-Eun YOO; Doo-Sun CHOI; Kyung-Hyun WHANG; Myung-Chang KANG

    2009-01-01

    The BLU (back light unit)is the core component of the LCD for notebook, mobile-phone, navigation, as well as large sized TV, PID (public information display), etc. In order to enhance optical efficiency of LCD, optical films with the uniform prism patterns have been used for BLU by stacking two films up orthogonally. In this case, light interference-phenomenon occurred such as Morie, wet-out, u-turning, etc. It caused several problems such as low brightness, spots and stripes in LCD. Recently, the high-luminance micro complex prism patterns are actively studied to avoid the light interference-phenomenon and enhance the optical efficiency. In this study, the roll master to manufacture complex micro prism pattern film was machined by using the high precision lathe. The machined patterns on the roll master were 50, 45, 40, 35, 30, 25, 20, 15, 10 and 5μm in the pitch with 25.0, 22.5, 20.0, 17.5, 15.0, 12.5, 10.0, 7.5, 5.0 and 2.5 μm in the peak height, respectively. The roll was 2 000 mm in length and 320 mm in diameter. The electroplated roll by copper and the natural single crystal diamond tool was used for machining the patterns. The cutting force was measured and analyzed for each cutting condition by using the dynamometer. The chips and the surfaces after being machined were analyzed by SEM and microscope.

  10. Dynamics of dual prism adaptation: relating novel experimental results to a minimalistic neural model.

    Orlando Arévalo

    Full Text Available In everyday life, humans interact with a dynamic environment often requiring rapid adaptation of visual perception and motor control. In particular, new visuo-motor mappings must be learned while old skills have to be kept, such that after adaptation, subjects may be able to quickly change between two different modes of generating movements ('dual-adaptation'. A fundamental question is how the adaptation schedule determines the acquisition speed of new skills. Given a fixed number of movements in two different environments, will dual-adaptation be faster if switches ('phase changes' between the environments occur more frequently? We investigated the dynamics of dual-adaptation under different training schedules in a virtual pointing experiment. Surprisingly, we found that acquisition speed of dual visuo-motor mappings in a pointing task is largely independent of the number of phase changes. Next, we studied the neuronal mechanisms underlying this result and other key phenomena of dual-adaptation by relating model simulations to experimental data. We propose a simple and yet biologically plausible neural model consisting of a spatial mapping from an input layer to a pointing angle which is subjected to a global gain modulation. Adaptation is performed by reinforcement learning on the model parameters. Despite its simplicity, the model provides a unifying account for a broad range of experimental data: It quantitatively reproduced the learning rates in dual-adaptation experiments for both direct effect, i.e. adaptation to prisms, and aftereffect, i.e. behavior after removal of prisms, and their independence on the number of phase changes. Several other phenomena, e.g. initial pointing errors that are far smaller than the induced optical shift, were also captured. Moreover, the underlying mechanisms, a local adaptation of a spatial mapping and a global adaptation of a gain factor, explained asymmetric spatial transfer and generalization of prism

  11. High-performance beam steering using electrowetting-driven liquid prism fabricated by a simple dip-coating method

    Enrico Clement, Carlos; Park, Sung-Yong

    2016-05-01

    A high degree of beam steering is demonstrated using an electrowetting-driven liquid prism. While prism devices have typically relied on complex and expensive laboratory setups, such as high-vacuum facilities for fabrication of dielectric layers, this work utilizes a simple dip-coating method to provide an ion gel layer as a dielectric, offering 2 or 3 orders higher specific capacitance (c ≈ 10 μF/cm2) than that of conventional dielectrics. Analytical studies present the effects of liquid selection and arrangement on overall prism performance. For experimental demonstrations of high-performance beam steering, we not only selected two immiscible liquids of water and 1-bromonaphthalene (1-BN) oil which provide the large refractive index difference (nwater = 1.33 and n1-BN = 1.65 at λ = 532 nm) between them, but also utilized a double-stacked prism configuration which increases the number of interfaces for incoming light to be steered. At a prism apex angle of φ = 27°, we were able to achieve significantly large beam steering of up to β = 19.06°, which is the highest beam steering performance ever demonstrated using electrowetting technology.

  12. Simplified analysis of PRISM RVACS [Reactor Vessel Auxiliary Cooling System] performance without liner spill-over

    Simplified analysis of the performance of the PRISM RVACS decay heat removal system under off-normal conditions, i.e., without the liner spill-over, is described. Without the spilling of hot-pool sodium over the liner and the resultant down-flow along the inside of the reactor vessel wall, the RVACS system performance becomes dominated by the radial heat condition and radiation. Simple estimates of the resulting heat conduction and radiation processes support GE's contention that the RVACS performance is not severely impacted by the absence of spillover, and can improve significantly if sodium has leaked into the region between the reactor and containment vessels. 7 refs

  13. PRISM (Polarized Radiation Imaging and Spectroscopy Mission): an extended white paper

    PRISM (Polarized Radiation Imaging and Spectroscopy Mission) was proposed to ESA in May 2013 as a large-class mission for investigating within the framework of the ESA Cosmic Vision program a set of important scientific questions that require high resolution, high sensitivity, full-sky observations of the sky emission at wavelengths ranging from millimeter-wave to the far-infrared. PRISM's main objective is to explore the distant universe, probing cosmic history from very early times until now as well as the structures, distribution of matter, and velocity flows throughout our Hubble volume. PRISM will survey the full sky in a large number of frequency bands in both intensity and polarization and will measure the absolute spectrum of sky emission more than three orders of magnitude better than COBE FIRAS. The data obtained will allow us to precisely measure the absolute sky brightness and polarization of all the components of the sky emission in the observed frequency range, separating the primordial and extragalactic components cleanly from the galactic and zodiacal light emissions. The aim of this Extended White Paper is to provide a more detailed overview of the highlights of the new science that will be made possible by PRISM, which include: (1) the ultimate galaxy cluster survey using the Sunyaev-Zeldovich (SZ) effect, detecting approximately 106 clusters extending to large redshift, including a characterization of the gas temperature of the brightest ones (through the relativistic corrections to the classic SZ template) as well as a peculiar velocity survey using the kinetic SZ effect that comprises our entire Hubble volume; (2) a detailed characterization of the properties and evolution of dusty galaxies, where the most of the star formation in the universe took place, the faintest population of which constitute the diffuse CIB (Cosmic Infrared Background); (3) a characterization of the B modes from primordial gravity waves generated during inflation

  14. Q-switching of a microchip laser using a plasma prism

    We demonstrate a novel method for active and passive Q-switching of a bulk laser source. The mechanism is based on the deflection of laser light through an electric channel of plasma that is temporarily created inside the resonator. The channel of plasma consists of an electric spark in air actuated with a spark gap. It acts as a spatio-temporal prism that momentarily enables the laser light to oscillate resonantly, thus triggering the creation of a laser pulse. Nanosecond pulses from a microchip laser source have been obtained with a limited timing jitter

  15. Modeling of turbulent flow in the neighborhood of forced and freely oscillating rectangular prisms

    The problem of incompressible two-dimensional viscous flow past an infinite prism of rectangular cross section subjected to forced or free oscillation in the transverse direction is considered. The complete Reynolds equations, closed by means of a two-parameter k-ε-model of turbulence, are solved numerically in the noninertial coordinate system. The coefficients of the aerodynamic forces acting on the body are calculated as time functions; in the case of free oscillations the paths of the body and the instantaneous velocities of the oscillatory motion are calculated

  16. Reflected beam parameters during excitation of a waveguide with cubic nonlinearity through a prism coupler

    The problem of the field of TE-polarized light beam reflected from the prism during excitation of an optical waveguide possessing cubic nonlinearity is solved. The effect of nonlinear switching is studied taking into account the amplitude distribution of the exciting beam and nonlinear absorption. New possibilities of determining the nonlinear constants of waveguide layers form the intensity distribution of the reflected beam are found. The results of experimental study of the As2S3 film waveguide are presented. 20 refs., 4 figs

  17. Spectroscopic Evidence for the Tricapped Trigonal Prism Structure of Semiconductor Clusters

    We have obtained photoelectron spectra (PES) for silicon cluster anions with up to 20 atoms. Efficient cooling of species in the source has allowed us to resolve multiple features in the PES for all sizes studied. Spectra for an extensive set of low-energy Sin- isomers found by a global search have been simulated using density functional theory and pseudopotentials. Except for n=12 , calculations for Sin- ground states agree with the measurements. This does not hold for other plausible geometries. Hence PES data validate the tricapped trigonal prism morphologies for medium-sized Si clusters. (c) 2000 The American Physical Society

  18. PRISM (Polarized Radiation Imaging and Spectroscopy Mission): an extended white paper

    André, Philippe [Laboratoire d' Astrophysique de Paris-Saclay, Gif-sur-Yvette Cedex (France); Baccigalupi, Carlo; Bielewicz, Pawel [SISSA, Via Bonomea 265, 34136, Trieste (Italy); Banday, Anthony [Université de Toulouse, UPS-OMP, IRAP, F-31028 Toulouse cedex 4 (France); Barbosa, Domingos [Grupo de Radio Astronomia Basic Sciences and Enabling Technologies Instituto de Telecomunicações, Campus Universitario de Santiago, 3810-193 Aveiro (Portugal); Barreiro, Belen [Instituto de Fìsica de Cantabria (CSIC-Universidad de Cantabria) Avda. de los Castros s/n, 39005 Santander (Spain); Bartlett, James [APC, AstroParticule et Cosmologie, Université Paris Diderot, CNRS/IN2P3, CEA/lrfu, Observatoire de Paris, Sorbonne Paris, Cité, 10, rue Alice Domon et Léonie Duquet, 75205 Paris Cedex 13 (France); Bartolo, Nicola [Dipartimento di Fisica e Astronomia ' ' G. Galilei" , Università degli studi di Padova, via Marzolo 8, I-35131, Padova (Italy); Battistelli, Elia [Dipartimento di Fisica, Università di Roma La Sapienza, P.le A. Moro 2, 00185 Roma (Italy); Battye, Richard; Bonaldi, Anna [Jordell Bank Centre for Astrophysics, School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); Bendo, George [U.K. ALMA Regional Centre Node, Jordell Bank Centre for Astrophysics, School of Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); Benoȋt, Alain [Physics and Astronomy, University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); Bernard, Jean-Philippe [CNRS, IRAP, 9 Av. colonel Roche, BP 44346, F-31028 Toulouse cedex 4 (France); Bersanelli, Marco [Dipartimento di Fisica, Università degli Studi di Milano, Via Celoria, 16, Milano (Italy); Béthermin, Matthieu, E-mail: naselsky@nbi.dk [European Southern Observatory, Karl-Schwarzschild-Str. 2, 85748 Garching (Germany); and others

    2014-02-01

    PRISM (Polarized Radiation Imaging and Spectroscopy Mission) was proposed to ESA in May 2013 as a large-class mission for investigating within the framework of the ESA Cosmic Vision program a set of important scientific questions that require high resolution, high sensitivity, full-sky observations of the sky emission at wavelengths ranging from millimeter-wave to the far-infrared. PRISM's main objective is to explore the distant universe, probing cosmic history from very early times until now as well as the structures, distribution of matter, and velocity flows throughout our Hubble volume. PRISM will survey the full sky in a large number of frequency bands in both intensity and polarization and will measure the absolute spectrum of sky emission more than three orders of magnitude better than COBE FIRAS. The data obtained will allow us to precisely measure the absolute sky brightness and polarization of all the components of the sky emission in the observed frequency range, separating the primordial and extragalactic components cleanly from the galactic and zodiacal light emissions. The aim of this Extended White Paper is to provide a more detailed overview of the highlights of the new science that will be made possible by PRISM, which include: (1) the ultimate galaxy cluster survey using the Sunyaev-Zeldovich (SZ) effect, detecting approximately 10{sup 6} clusters extending to large redshift, including a characterization of the gas temperature of the brightest ones (through the relativistic corrections to the classic SZ template) as well as a peculiar velocity survey using the kinetic SZ effect that comprises our entire Hubble volume; (2) a detailed characterization of the properties and evolution of dusty galaxies, where the most of the star formation in the universe took place, the faintest population of which constitute the diffuse CIB (Cosmic Infrared Background); (3) a characterization of the B modes from primordial gravity waves generated during

  19. Compact surface plasmon resonance biosensor utilizing an injection-molded prism

    Chen, How-Foo; Chen, Chih-Han; Chang, Yun-Hsiang; Chuang, Hsin-Yuan

    2016-05-01

    Targeting at a low cost and accessible diagnostic device in clinical practice, a compact surface plasmon resonance (SPR) biosensor with a large dynamic range in high sensitivity is designed to satisfy commercial needs in food safety, environmental bio-pollution monitoring, and fast clinical diagnosis. The core component integrates an optical coupler, a sample-loading plate, and angle-tuning reflectors is injection-molded as a free-from prism made of plastic optics. This design makes a matching-oil-free operation during operation. The disposability of this low-cost component ensures testing or diagnosis without cross contamination in bio-samples.

  20. Pyridine ligand rotation in self-assembled trigonal prisms. Evidence for intracage solvent vapor bubbles

    Vacek, Jaroslav; Caskey, D. C.; Horinek, D.; Shoemaker, R. K.; Stang, P. J.; Michl, Josef

    2008-01-01

    Roč. 130, č. 24 (2008), s. 7629-7638. ISSN 0002-7863 R&D Projects: GA AV ČR IAA400550616; GA MŠk ME 857 Grant ostatní: NSF(US) CHE-0306720; NSF(US) CHE-0446688; NSF(US) OISE0532040; European Commission(XE) STRPNMP4-013880; European Commission(XE) MCRTNCT-2005019481 Institutional research plan: CEZ:AV0Z40550506 Keywords : role of bubbles * self assembly * trigonal prisms Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 8.091, year: 2008

  1. Indirect versus direct feedback in computer-based Prism Adaptation Therapy

    Wilms, Inge Linda; Rytter, Hana Malá

    2010-01-01

    Prism Adaptation Therapy (PAT) is an intervention method in the treatment of the attention disorder neglect (Frassinetti, Angeli, Meneghello, Avanzi, & Ladavas, 2002; Rossetti, et al., 1998). The aim of this study was to investigate whether one session of PAT using a computer-attached touchscreen...... would produce similar aftereffects as the conventional physical box normally used in PAT. In four experiments, 81 healthy subjects and 7 brain-injured patients diagnosed with neglect were subjected to a single session of PAT under two conditions: 1) using the original physical box, 2) using a computer...

  2.   Indirect versus direct feedback in computer-based Prism Adaptation Therapy

    Wilms, Inge Linda; Rytter, Hana Malá

    2010-01-01

      Prism Adaptation Therapy (PAT) is an intervention method in the treatment of the attention disorder neglect (Frassinetti, Angeli, Meneghello, Avanzi, & Ladavas, 2002; Rossetti, et al., 1998). The aim of this study was to investigate whether one session of PAT using a computer-attached touchscreen...... would produce similar aftereffects as the conventional physical box normally used in PAT.   In four experiments, 81 healthy subjects and 7 brain-injured patients diagnosed with neglect were subjected to a single session of PAT under two conditions: 1) using the original physical box, 2) using a computer...

  3. Hollow optical-fiber based infrared spectroscopy for measurement of blood glucose level by using multi-reflection prism.

    Kino, Saiko; Omori, Suguru; Katagiri, Takashi; Matsuura, Yuji

    2016-02-01

    A mid-infrared attenuated total reflection (ATR) spectroscopy system employing hollow optical fibers and a trapezoidal multi-reflection ATR prism has been developed to measure blood glucose levels. Using a multi-reflection prism brought about higher sensitivity, and the flat and wide contact surface of the prism resulted in higher measurement reproducibility. An analysis of in vivo measurements of human inner lip mucosa revealed clear signatures of glucose in the difference spectra between ones taken during the fasting state and ones taken after ingestion of glucose solutions. A calibration plot based on the absorption peak at 1155 cm(-1) that originates from the pyranose ring structure of glucose gave measurement errors less than 20%. PMID:26977373

  4. THE PRISM MULTI-OBJECT SURVEY (PRIMUS). II. DATA REDUCTION AND REDSHIFT FITTING

    Cool, Richard J. [MMT Observatory, Tucson, AZ 85721 (United States); Moustakas, John [Department of Physics, Siena College, 515 Loudon Rd., Loudonville, NY 12211 (United States); Blanton, Michael R.; Hogg, David W. [Center for Cosmology and Particle Physics, Department of Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Burles, Scott M. [D.E. Shaw and Co. L.P, 20400 Stevens Creek Blvd., Suite 850, Cupertino, CA 95014 (United States); Coil, Alison L.; Aird, James; Mendez, Alexander J. [Department of Physics, Center for Astrophysics and Space Sciences, University of California, 9500 Gilman Dr., La Jolla, San Diego, CA 92093 (United States); Eisenstein, Daniel J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St, MS 20, Cambridge, MA 02138 (United States); Wong, Kenneth C. [Steward Observatory, The University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721 (United States); Zhu, Guangtun [Center for Astrophysical Sciences, Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Bernstein, Rebecca A. [Department of Astronomy and Astrophysics, UCA/Lick Observatory, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Bolton, Adam S. [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States)

    2013-04-20

    The PRIsm MUlti-object Survey (PRIMUS) is a spectroscopic galaxy redshift survey to z {approx} 1 completed with a low-dispersion prism and slitmasks allowing for simultaneous observations of {approx}2500 objects over 0.18 deg{sup 2}. The final PRIMUS catalog includes {approx}130,000 robust redshifts over 9.1 deg{sup 2}. In this paper, we summarize the PRIMUS observational strategy and present the data reduction details used to measure redshifts, redshift precision, and survey completeness. The survey motivation, observational techniques, fields, target selection, slitmask design, and observations are presented in Coil et al. Comparisons to existing higher-resolution spectroscopic measurements show a typical precision of {sigma}{sub z}/(1 + z) = 0.005. PRIMUS, both in area and number of redshifts, is the largest faint galaxy redshift survey completed to date and is allowing for precise measurements of the relationship between active galactic nuclei and their hosts, the effects of environment on galaxy evolution, and the build up of galactic systems over the latter half of cosmic history.

  5. Optical system design of the snapshot imaging spectrometerusing image replication based on Wollaston prism

    Pei, Lin-lin; Min, Huang; Lv, Qun-bo; Wang, Jian-wei; Li, Wei-yan

    2015-01-01

    Imaging spectral is a novel detection approach which simultaneously acquires two-dimensional visual picture and one-dimensional spectral information.The imaging spectrometer not only provides abundant data for aeronautics and astronautics remote sensing, but also offers promising applications on biomedical imaging, conservation and identification of art works,surveillance of food safety,prevention and control of plant diseases and elimination of pests,and so forth. In this paper, the snapshot imaging spectrometer using image replication based on Wollaston prisms is designed. This system includes the telescope objective, the collimator lens, the wave plates, Wollaston prisms, and the imaging lens.The imaging spectrometer system based on multi-configuration can obtain a high diffraction efficiency. Every configuration provide a kind of wave. The 16 configurations are in one mechanical structure. The system's MTF at 56 line pairs is better than 0.75. The RMS of the spots are all in one pixel.The imaging spectrometer can obtain perfect data.

  6. Polygonal Prism Mesh in the Viscous Layers for the Polyhedral Mesh Generator, PolyGen

    Polyhedral mesh has been known to have some benefits over the tetrahedral mesh. Efforts have been made to set up a polyhedral mesh generation system with open source programs SALOME and TetGen. The evaluation has shown that the polyhedral mesh generation system is promising. But it is necessary to extend the capability of the system to handle the viscous layers to be a generalized mesh generator. A brief review to the previous works on the mesh generation for the viscous layers will be made in section 2. Several challenging issues for the polygonal prism mesh generation will be discussed as well. The procedure to generate a polygonal prism mesh will be discussed in detail in section 3. Conclusion will be followed in section 4. A procedure to generate meshes in the viscous layers with PolyGen has been successfully designed. But more efforts have to be exercised to find the best way for the generating meshes for viscous layers. Using the extrusion direction of the STL data will the first of the trials in the near future

  7. Use of a double-Wollaston prism laser differential interferometer in a plasma focus

    A double-Wollaston prism laser differential interferometer (LDI) has been developed to observe, for the first time, the evolution of the imploding current sheath (CS) and the high temperature and high density plasma pinch in the plasma focus. The light source is a Q-switched and frequency-doubled YAG laser operated in a single-pulse mode: λ=532 nm, the pulse width (FWHM) about 10 nm (also the resolution time of the LDI). The LDI measures density gradients and has a line sensitivity of about ne'=(2.58±0.46)x1025 m-4 for a typical sheath thickness of 1.6 mm and a minimum distinguishable fringe shift of 5%, and a spatial resolution of 1.26 mm. The density gradient and equivalent density of the CS are measured to be ne'∼(2.58±0.46)x1026 m-4 and ne∼(3.25±0.59)x1023 m-3, respectively. More importantly in this article, the double-Wollaston prism LDI, with a simple optical arrangement, gives direct physical pictures of the high density gradient plasma configuration and structure which are of interest in studying the status of plasma motion. copyright 1997 American Institute of Physics

  8. THE PRISM MULTI-OBJECT SURVEY (PRIMUS). I. SURVEY OVERVIEW AND CHARACTERISTICS

    We present the PRIsm MUlti-object Survey (PRIMUS), a spectroscopic faint galaxy redshift survey to z ∼ 1. PRIMUS uses a low-dispersion prism and slitmasks to observe ∼2500 objects at once in a 0.18 deg2 field of view, using the Inamori Magellan Areal Camera and Spectrograph camera on the Magellan I Baade 6.5 m telescope at Las Campanas Observatory. PRIMUS covers a total of 9.1 deg2 of sky to a depth of iAB ∼ 23.5 in seven different deep, multi-wavelength fields that have coverage from the Galaxy Evolution Explorer, Spitzer, and either XMM or Chandra, as well as multiple-band optical and near-IR coverage. PRIMUS includes ∼130,000 robust redshifts of unique objects with a redshift precision of σz/(1 + z) ∼ 0.005. The redshift distribution peaks at z ∼ 0.6 and extends to z = 1.2 for galaxies and z = 5 for broad-line active galactic nuclei. The motivation, observational techniques, fields, target selection, slitmask design, and observations are presented here, with a brief summary of the redshift precision; a forthcoming paper presents the data reduction, redshift fitting, redshift confidence, and survey completeness. PRIMUS is the largest faint galaxy survey undertaken to date. The high targeting fraction (∼80%) and large survey size will allow for precise measures of galaxy properties and large-scale structure to z ∼ 1.

  9. THE PRISM MULTI-OBJECT SURVEY (PRIMUS). II. DATA REDUCTION AND REDSHIFT FITTING

    The PRIsm MUlti-object Survey (PRIMUS) is a spectroscopic galaxy redshift survey to z ∼ 1 completed with a low-dispersion prism and slitmasks allowing for simultaneous observations of ∼2500 objects over 0.18 deg2. The final PRIMUS catalog includes ∼130,000 robust redshifts over 9.1 deg2. In this paper, we summarize the PRIMUS observational strategy and present the data reduction details used to measure redshifts, redshift precision, and survey completeness. The survey motivation, observational techniques, fields, target selection, slitmask design, and observations are presented in Coil et al. Comparisons to existing higher-resolution spectroscopic measurements show a typical precision of σz/(1 + z) = 0.005. PRIMUS, both in area and number of redshifts, is the largest faint galaxy redshift survey completed to date and is allowing for precise measurements of the relationship between active galactic nuclei and their hosts, the effects of environment on galaxy evolution, and the build up of galactic systems over the latter half of cosmic history.

  10. The PRIsm MUlti-object Survey (PRIMUS). II. Data Reduction and Redshift Fitting

    Cool, Richard J; Blanton, Michael R; Burles, Scott M; Coil, Alison L; Eisenstein, Daniel J; Wong, Kenneth C; Zhu, Guangtun; Aird, James; Bernstein, Rebecca A; Bolton, Adam S; Hogg, David W; Mendez, Alexander J

    2013-01-01

    The PRIsm MUti-object Survey (PRIMUS) is a spectroscopic galaxy redshift survey to z~1 completed with a low-dispersion prism and slitmasks allowing for simultaneous observations of ~2,500 objects over 0.18 square degrees. The final PRIMUS catalog includes ~130,000 robust redshifts over 9.1 sq. deg. In this paper, we summarize the PRIMUS observational strategy and present the data reduction details used to measure redshifts, redshift precision, and survey completeness. The survey motivation, observational techniques, fields, target selection, slitmask design, and observations are presented in Coil et al 2010. Comparisons to existing higher-resolution spectroscopic measurements show a typical precision of sigma_z/(1+z)=0.005. PRIMUS, both in area and number of redshifts, is the largest faint galaxy redshift survey completed to date and is allowing for precise measurements of the relationship between AGNs and their hosts, the effects of environment on galaxy evolution, and the build up of galactic systems over t...

  11. 2D Numerical Simulation of Fluid Flow over a Rectangular Prism

    Kaustubh Ravindra Bhat

    2009-08-01

    Full Text Available

    This paper is a part of an elaborate research involving simulation and practical testing of flows across solid objects. The research presented here deals with only the numerical modelling of such flows by development of code specifically for this purpose. The objective of this paper is to model the unsteady flow of incompressible fluid across a rectangular prism using simple collocated grid arrangement for Navier-Stokes Equation. The flow has been modelled numerically and flow visualizations have been generated for increasing values of Reynolds Number for a fluid at high kinematic viscosity. These results have been validated against previously probed values of the Strouhal Number versus the Reynolds Number. Also, an investigation has been made into the flow characteristics of a fluid at low kinematic viscosity in comparison with the highly viscous fluid at the same Reynolds Number. The simulations have been performed at low values of Reynolds Number. A prism of unit depth was chosen. The numerical investigation provides substantial information regarding the vortex shedding characteristics with increasing values of Reynolds Number.

  12. On testing violations of Bose and $CPT$ symmetries via Dalitz plots and Dalitz `prism'

    Sahoo, Dibyakrupa; Deshpande, N G

    2014-01-01

    Bose symmetry and $CPT$ symmetry are two very fundamental symmetries of Nature. However, the validity of these symmetries in diverse phenomena must be verified by experiments. We propose new techniques to probe these two fundamental symmetries in the realm of mesons by using the Dalitz plot of a few three-body meson decays. Since these symmetries are very fundamental in nature, their violations, if any, are expected to be extremely small. Hence observing their violations requires study of a huge data sample. In this context we introduce a new three-dimensional plot which we refer to as the Dalitz 'prism'. This provides an innovative means for acquiring the huge statistics required for such studies. Using the Dalitz plots and the Dalitz prisms we chart out the way to probe the violations of Bose and $CPT$ symmetries in a significant manner. Since mesons are unstable and composite particles, testing the validity of Bose symmetry and the $CPT$ symmetry in these cases are of paramount importance for fundamental p...

  13. Morphine enhances the release of /sup 3/H-purines from rat brain cerebral cortical prisms

    Wu, P.H.; Phillis, J.W.; Yuen, H.

    1982-10-01

    In vitro experiments have shown that /sup 3/H-purines can be released from /sup 3/H-adenosine preloaded rat brain cortical prisms by a KCl-evoked depolarization. The KCl-evoked release of /sup 3/H-purines is dependent on the concentration of KCl present in the superfusate. At concentrations of 10(-7) approximately 10(-5)M morphine did not influence the basal release of /sup 3/H-purines from the prisms, although it enhanced the KCl-evoked release of /sup 3/H-purines. The enhancement of KCl-evoked /sup 3/H-purine release by morphine was concentration-dependent and was antagonized by naloxone, suggesting the involvement of opiate receptors. Uptake studies with rat brain cerebral cortical synaptosomes show that morphine is a very weak inhibitor of adenosine uptake. Comparisons with dipyridamole, a potent inhibitor of adenosine uptake, suggest that this low level of inhibition of the uptake did not contribute significantly to the release of /sup 3/H-purine by morphine seen in our experiments. It is therefore suggested that morphine enhances KCl-evoked /sup 3/H-purine release by an interaction with opiate receptors and that the resultant increase in extracellular purine (adenosine) levels may account for some of the actions of morphine.

  14. Morphine enhances the release of 3H-purines from rat brain cerebral cortical prisms

    In vitro experiments have shown that 3H-purines can be released from 3H-adenosine preloaded rat brain cortical prisms by a KCl-evoked depolarization. The KCl-evoked release of 3H-purines is dependent on the concentration of KCl present in the superfusate. At concentrations of 10(-7) approximately 10(-5)M morphine did not influence the basal release of 3H-purines from the prisms, although it enhanced the KCl-evoked release of 3H-purines. The enhancement of KCl-evoked 3H-purine release by morphine was concentration-dependent and was antagonized by naloxone, suggesting the involvement of opiate receptors. Uptake studies with rat brain cerebral cortical synaptosomes show that morphine is a very weak inhibitor of adenosine uptake. Comparisons with dipyridamole, a potent inhibitor of adenosine uptake, suggest that this low level of inhibition of the uptake did not contribute significantly to the release of 3H-purine by morphine seen in our experiments. It is therefore suggested that morphine enhances KCl-evoked 3H-purine release by an interaction with opiate receptors and that the resultant increase in extracellular purine (adenosine) levels may account for some of the actions of morphine

  15. Porosity-formation factor and porosity-velocity relationships in Barbados prism

    Erickson, Stephanie N.; Jarrard, Richard D.

    1999-07-01

    Ocean Drilling Program Leg 171A collected logging while drilling (LWD) data to investigate the porosity and velocity structure of Barbados accretionary complex. Porosity and velocity measurements were needed for interpretation of prism dynamics. However, the LWD tool string did not measure velocity, and previous velocity data from Barbados prism are scarce and generally of low quality. Furthermore, most density-based porosities are subject to errors associated with variations in smectite content. To determine porosities more accurately, we use smectite-corrected, density-based porosities to calibrate a porosity-formation factor (FF) transform, then calculate porosities from resistivity logs. We used cation exchange capacity (CEC) measurements and LWD logs to evaluate the possibility that resistivity is affected by clay conduction. The CEC data warn of potential clay conduction, especially in smectite-rich zones, but LWD data indicate that clay conduction is minor in these high-porosity sediments. Instead, tortuosity is the secondary control of FF, after porosity. By comparing resistivity-based porosities to velocities from vertical seismic profiles, we determine a porosity-velocity transform applicable to Barbados. We then use this transform to calculate velocity logs from resistivity-based porosity logs.

  16. Seasonal variation of tidal prism and energy in the Changjiang River estuary: a numerical study

    Zhang, Min; Townend, Ian Howard; Cai, Huayang; Zhou, Yunxuan

    2016-01-01

    Tidal rivers are intrinsically complex because tidal propagation is influenced by river discharge. This study aims to examine the seasonal variation of tidal prism and energy variance in the tidal river of the Changjiang (Yangtze) River estuary in China. In order to quantify the behaviour of river and tide, we use numerical modelling that has been validated using measured data. We conduct our analysis by quantifying the discharge and energy variance in separate components for both the river and the tide, during wet and dry seasons. We note various definitions of tidal prism and explore the difference between tidal discharge on the flood and ebb and tidal storage volume. The results show that the river discharge attenuates the tidal motion and reduces the tidal flood discharge but the tidal storage volume is approximately constant with different riverine discharge since part of the fresh water discharge is intercepted and captured in the estuary due to the backwater effect. It appears that the tidal discharge adjusts according to the variation of river discharge to keep a constant tidal storage volume. An analysis of the hydraulics shows that the transition from tidal dominance (at the mouth) to river dominance (upstream) depends on the location of tidal current reversal which varies from wet season to dry season. Duringthe wet season, the Changjiang River estuary is totally dominated by energy from fresh water discharge.

  17. FDS5 Simulation for OECD PRISME Fire Test of DOOR PRSD5

    OECD/NEA PRISME Fire Project is an international co-operation project to investigate fire propagation by means of experiments and analyses for nuclear power plant applications. This project focuses on the generation of experimental data for fire and smoke propagation from the fire room to adjacent rooms under various conditions and room configurations. In addition, analyses using computer codes are performed to understand the phenomena of interest and to produce a consistent interpretation of the experimental results. The PRISME Project is composed of series of tests named as SOURCE, DOOR, LEAK and Global Tests. The SOURCE is composed of tests to characterize the fire source, and the DOOR is to study fire and smoke propagation through an open door, while the LEAK is to investigate hot gas leakages through other modes of openings such as holes, a slot, a duct, and a partially opened door. The Global test will be conducted as integral tests on the basis of the results of the previous separate effects tests. In this paper, simulations are performed with FDS5 computer code for the DOOR Test No.5 (PRSD5) and the calculation results are compared with the corresponding experimental data to study the code capability to predict the phenomena of the hot gas propagation between two rooms

  18. Hard x-ray holographic microscopy using refractive prism and Fresnel zone plate objective

    An optics for hard x-ray holographic microscopy has been developed and preliminary experiments have been done at SPring-8 undulator beamline 20XU. The optical system consists of an x-ray objective lens (Fresnel zone plate) and a wave front-division-type interferometer with prism optics. The illuminating x-ray beam is coherent with parallel radiation, and the spatially coherent area is much larger than the aperture of the objective lens. The refractive prism is placed behind the back focal plane of the objective lens in order to configure the wavefront-dividing interferometer. Half of the illuminating radiation is used for illuminating an object, and the other half is used for forming a reference wave. The magnified image of the object is generated at an image plane, and the reference wave is superimposed on the magnified image of the object. The recorded interferogram includes both amplitude and phase information of the object. The spatial resolution is determined by the numerical aperture of the objective lens. Therefore, in principle, this method enables holographic imaging at nanometer scale to be carried out in the hard x-ray region

  19. Reading performance is not affected by a prism induced increase of horizontal and vertical vergence demand

    Muriel eDysli

    2014-06-01

    Full Text Available Purpose Dyslexia is the most common developmental reading disorder that affects language skills. Latent strabismus (heterophoria has been suspected to be causally involved. Even though phoria correction in dyslexic children is commonly applied, the evidence in support of a benefit is poor. In order to provide experimental evidence on this issue, we simulated phoria in healthy readers by modifying the vergence tone required to maintain binocular alignment. MethodsVergence tone was altered with prisms that were placed in front of one eye in 16 healthy subjects to induce exophoria, esophoria, or vertical phoria. Subjects were to read one paragraph for each condition, from which reading speed was determined. Text comprehension was tested with a forced multiple choice test. Eye movements were recorded during reading and subsequently analysed for saccadic amplitudes, saccades per 10 letters, percentage of regressive (backward saccades, average fixation duration, first fixation duration on a word, and gaze duration.ResultsAcute change of horizontal and vertical vergence tone does neither significantly affect reading performance nor reading associated eye movements. Conclusion Prisms in healthy subjects fail to induce a significant change of reading performance. This finding is not compatible with a role of phoria in dyslexia. Our results contrast the proposal for correcting small angle heterophorias in dyslexic children.

  20. Calibration of miniature prism-based stereoscopic imagers for precise spatial measurements

    Machikhin, Alexander S.; Gorevoy, Alexey V.

    2016-04-01

    The paper is targeted to find the optimal mathematical model and the calibration algorithm for the industrial endoscope equipped with the prism-based attachable stereo adapter, which allows imaging from two different points by a single sensor. We consider the conventional calibration methods for the pinhole camera model with polynomial distortion approximation and compared them with the ray tracing model based on the vector form of Snell's law. In order to evaluate each of the proposed models we have developed the software for the imitation of various calibration procedures using different types of calibration targets. We use the computer simulation to prove that the pinhole camera models, widely used in machine vision, are very limited for describing prism-based endoscopic measurement systems. Our analysis identified the main problems for these models, such as entrance pupil shift, non-homocentric beams and required number of coefficients for polynomial models and the iterative forward ray aiming for the ray-tracing model. The proposed technique is flexible and can also be used to test stability and convergence of the parameter estimation procedures and to compare calibration targets and strategies.

  1. SISTEM PENGUKURAN KINERJA DENGAN METODE PERFORMANCE PRISM (Studi Kasus di RUMAH SAKIT ISLAM SULTAN AGUNG SEMARANG

    Heru Prastawa

    2012-02-01

    Full Text Available Sultan Agung Islamic Hospital Semarang is a healthcare institution owned by Yayasan Badan Wakaf SultanAgung. To survive against the competitors, the hospital must have a good performance. Thus, a properperformance measurement system is required to assist the company in informing the hospital, so they know howfar has their effort worked in achieving the company’s vision and mission, including to analyze how far has thecompany developed. The researcher intends to design a performance measurement system using theperformance prism method at Sultan Agung Islamic Hospital Semarang. Designing a performance measurementsystem by implementing the performance prism method is sequenced by several phases. Firstly, identify thesatisfaction and stakeholder’s contribution, strategy identification phase, process, and capability, KeyPerformance Indicator (KPI identification phase, weighing KPI by Analytical Hierarchy Process (AHP phase,achieving performance targets by an Objective Matrix (OMAX phase, and the calculation phase of performancevalue in numbers. After we calculate the weighed KPI and performance value, a simulation is conducted to knowthe criteria and KPI elements that is prioritized a suggestion, improvement recommendation that could beapplied to enhance the performance of Sultan Agung Islamic Hospital Semarang

  2. ANALISIS PENGUKURAN KINERJA PERUSAHAAN DENGAN METODE PERFORMANCE PRISM DAN SCORING OBJECTIVE MATRIX (OMAX PADA PT. BPAS

    Adianto .

    2014-06-01

    Full Text Available Kinerja merupakan suatu tampilan keadaan secara utuh atas perusahaan selama periode waktu tertentu. PT. BPAS adalah sebuah perusahaan yang bergerak dalam bidang industri papan semen. Selama ini sistem pengukuran kinerja di PT. BPAS belum merepresentasikan kinerja organisasi secara komprehensif dan integratif. Oleh sebab itu pengukuran kinerja perlu dilakukan pada PT. BPAS dengan menggunakan metode Performance Prism dan Scoring OMAX agar dapat meningkatkan kinerja perusahaan secara maksimal. Performance Prism merupakan pengukuran yang terintegrasi, meliputi seluruh aspek perusahaan (stakeholder yang menyangkut kepuasan stakeholder dan kontribusi stakeholder, strategi, proses dan kapabilitas kepada perusahaan. Pengukuran kinerja dalam penelitian ini akan dilakukan secara bertahap dengan menggunakan beberapa metode antara lain pembobotan dengan Analytical Hierachy Process (AHP untuk mengetahui skala nilai prioritas setiap KPI, Scoring System dengan metode Objectives Matrix (OMAX dan Traffic Light System untuk mengetahui level setiap KPI pada perusahaan di tingkat korporasi. Dari hasil pengukuran kinerja pada PT. BPAS terdapat 16 KPI yang telah sesuai dengan harapan, 19 KPI yang masih memiliki performa yang cukup namun perlu diperhatikan dan 5 KPI yang memiliki performa sangat rendah. Sehingga didapatkan kesimpulan yaitu perusahaan perlu memperbaiki 5 KPI kinerja agar perusahaan dapat meningkatkan keseluruhan kinerjanya secara maksimal.

  3. Rapid growth of ZnO hexagonal prism crystals by direct microwave heating

    ZHU Zhenqi; ZHOU Jian; LIU Guizhen; REN Zhiguo

    2008-01-01

    ZnO hexagonal prism crystals were synthesized from ZnO powders by microwave heating in a short time (within 20 min) without any metal catalyst or transport agent.Zinc oxide raw materials were made by evaporating from the high-temperature zone in an enclosure atmosphere and crystals were grown on the self-source substrate.The inherent asymmetry in microwave heating provides the temperature gradient for crystal growth.Substrate and temperature distribution in the oven show significant effects on the growth of the ZnO crystal.The morphologies demonstrate that these samples are pure hexagonal prism crystals with maximum 80 μm in diameter and 600 μm in length,which possess a well faceted end and side surface.X-ray diffraction (XRD) reveals that these samples are pure crystals.The photoluminescence (PL) exhibits strong ultraviolet emission at room temperature,indicating potential applications for short-wave light-emitting photonic devices.

  4. EDUCATIONAL SOFTWARE FOR INTERACTIVE TRAINING OF STUDENTS ON THE THEME “MUTUAL INTERSECTING OF PYRAMIDS AND PRISMS IN AXONOMETRY”

    Boyan Georgiev Zlatanov

    2012-04-01

    Full Text Available This work acquaints with the program Sam for interactive computer training of students on the theme "Mutual intersecting of pyramids and prisms in axonometry”. The program containing three modules – teacher, student and autopilot – allows for briefest time to teach and study the whole variety of the tasks on this theme. A classification of the pierce points of the surrounding edges of the one polyhedron with the other one, based on the mutual position of their auxiliary planes, is made. The solutions of the tasks can be traced in each of the popular axonometric projection (cabinet projection, cavalier perspective, military perspective, increased orthogonal dimetry, increased orthogonal isometry in their significant stages as well as in each step. Each stage of the solution is accompanied by commentary. The student can manipulate any object of the drawing or can apply on the whole drawing rotation, translation, expansion, shrink, zoom, etc. The student can watch on all sides the rotating 3D image of the composition of the two intersecting polyhedrons and separate the rotating 3D image of their common part. The combination of traditional methods of training in descriptive geometry using the program Sam and the classification of the pierce points enable for a thorough, creative and self study of the students. They are instruments through which the students can not only learn in depth material for a short time, but they can prepare creative course projects such as: improvisations on a task or a selection of tasks from known sources and creating original tasks on a given topic. The program also allows to create dynamic geometric drawings.

  5. Affective SSVEP BCI to effectively control 3D objects by using a prism array-based display

    Mun, Sungchul; Park, Min-Chul

    2014-06-01

    3D objects with depth information can provide many benefits to users in education, surgery, and interactions. In particular, many studies have been done to enhance sense of reality in 3D interaction. Viewing and controlling stereoscopic 3D objects with crossed or uncrossed disparities, however, can cause visual fatigue due to the vergenceaccommodation conflict generally accepted in 3D research fields. In order to avoid the vergence-accommodation mismatch and provide a strong sense of presence to users, we apply a prism array-based display to presenting 3D objects. Emotional pictures were used as visual stimuli in control panels to increase information transfer rate and reduce false positives in controlling 3D objects. Involuntarily motivated selective attention by affective mechanism can enhance steady-state visually evoked potential (SSVEP) amplitude and lead to increased interaction efficiency. More attentional resources are allocated to affective pictures with high valence and arousal levels than to normal visual stimuli such as white-and-black oscillating squares and checkerboards. Among representative BCI control components (i.e., eventrelated potentials (ERP), event-related (de)synchronization (ERD/ERS), and SSVEP), SSVEP-based BCI was chosen in the following reasons. It shows high information transfer rates and takes a few minutes for users to control BCI system while few electrodes are required for obtaining reliable brainwave signals enough to capture users' intention. The proposed BCI methods are expected to enhance sense of reality in 3D space without causing critical visual fatigue to occur. In addition, people who are very susceptible to (auto) stereoscopic 3D may be able to use the affective BCI.

  6. Antibody-free PRISM-SRM for multiplexed protein quantification: Is this the new competition for immunoassays in bioanalysis?

    Shi, Tujin; Qian, Weijun

    2013-02-01

    Highly sensitive technologies for multiplexed quantification of a large number of candidate proteins will play an increasingly important role in clinical biomarker discovery, systems biology, and general biomedical research. Herein we introduce the new PRISM-SRM technology, which represents a highly sensitive multiplexed quantification technology capable of simultaneous quantification of many low-abundance proteins without the need of affinity reagents. The versatility of antibody-free PRISM-SRM for quantifying various types of targets including protein isoforms, protein modifications, metabolites, and others, thus offering new competition with immunoassays.

  7. X-ray holographic microscopy with Fresnel zone plate objective lens and double-diamond-prism interferometer

    A hard X-ray imaging holography system with a Fresnel zone plate objective lens and double-diamond-prism interferometer has been developed. The refractive prism made of single-crystal diamond is used for solving the radiation damage problem caused by high-flux-density X-ray beams. Uniform periodic interference fringes are observed, and a carrier fringe scan is carried out using a rotating thin glass plate as a phase shifter. Phase retrieval by the fringe scan method is also achieved with a suboptical spatial resolution. (author)

  8. Microwave Experimental Observation of Transmitted Enhanced Goos–Hänchen Displacement in Symmetry-Double-Prism Configuration

    It is theoretically proven that the transmitted Goos–Hänchen (GH) displacement in the symmetry-double prism could be resonantly enhanced when the incident angle is less than but near the critical angle, and is modulated by the slab thickness between two prisms and the incident angle. This enhancement effect is directly observed in microwave experiments in which the incident angle is properly chosen. The measured data are in good agreement with the result of the numerical simulation. (fundamental areas of phenomenology (including applications))

  9. Evaluating PRISM (Pictorial Representation of Illness and Self Measure) as a measure of life quality for children with skin diseases

    Melbardis Jørgensen, K.; Jemec, G.B.E.

    2011-01-01

    of age-dependant cognitive development on children's self-reported QoL. Methods and materials: A total of 43 children of both sexes aged 5-16, with a diagnosed dermatologic disease were asked to complete both PRISM and CDLQI. Children with a mental handicap, children who did not speak Danish or who......-verbal instrument may therefore be of particular relevance to pediatric patients. Purpose: To evaluate PRISM (Pictorial Representation of Illness and Self Measure) as a non-verbal measure of QoL for children with skin diseases compared to CDLQI (Children's Dermatology Life Quality Index) and the possible influence...

  10. Nursing Positions

    ... Story" 5 Things to Know About Zika & Pregnancy Nursing Positions KidsHealth > For Parents > Nursing Positions Print A ... and actually needs to feed. Getting Comfortable With Breastfeeding Nursing can be one of the most challenging ...

  11. Positive Psychology

    Peterson, Christopher

    2009-01-01

    Positive psychology is a deliberate correction to the focus of psychology on problems. Positive psychology does not deny the difficulties that people may experience but does suggest that sole attention to disorder leads to an incomplete view of the human condition. Positive psychologists concern themselves with four major topics: (1) positive…

  12. Ubiquitous positioning

    Mannings, Robin

    2008-01-01

    This groundbreaking resource offers a practical, in-depth understanding of Ubiquitous Positioning - positioning systems that identify the location and position of people, vehicles and objects in time and space in the digitized networked economy. The future and growth of ubiquitous positioning will be fueled by the convergence of many other areas of technology, from mobile telematics, Internet technology, and location systems, to sensing systems, geographic information systems, and the semantic web. This first-of-its-kind volume explores ubiquitous positioning from a convergence perspective, of

  13. Evidence of a Biological Control over Origin, Growth and End of the Calcite Prisms in the Shells of Pinctada margaritifera (Pelecypod, Pterioidea

    Jean-Pierre Cuif

    2014-12-01

    Full Text Available Consistently classified among the references for calcite simple prisms, the microstructural units that form the outer layer of the Pinctada margaritifera have been investigated through a series of morphological, crystallographical and biochemical characterizations. It is often said that the polygonal transverse shape of the prisms result from the competition for space between adjacent crystals. In contrast to this classical scheme the Pinctada prisms appear to be composed of four successive developmental stages from the concentrically growing disks on the internal side of the periostracum to the morphological, structural and compositional changes in both envelopes and mineral components at the end of the prisms. These latest structural and compositional changes predate nacre deposition, so that the end of prism growth is not caused by occurrence of nacre, but by metabolic changes in the secretory epithelium. This sequence makes obvious the permanent biological control exerted by the outer cell layer of the mantle in both organic envelopes and mineralizing organic phases.

  14. Traits of patients who screen positive for dementia and refuse diagnostic assessment

    Fowler, Nicole R.; Frame, Amie; Perkins, Anthony J; Gao, Sujuan; Watson, Dennis P; Monahan, Patrick; Boustani, Malaz A.

    2015-01-01

    Background As part of the debate about screening for dementia, it is critical to understand why patients agree or disagree to diagnostic assessment after a positive screening test. We used the Perceptions Regarding Investigational Screening for Memory in Primary Care (PRISM-PC) questionnaire to measure the characteristics of patients who screened positive for dementia but refused further diagnostic assessment. Methods Survey of patients ≥65 years old without a diagnosis of dementia attending ...

  15. Open Season for Data Fishing on the Web: The Challenges of the US PRISM Programme for the EU

    D. Bigo; G. Boulet; C. Bowden; S. Carrera; E. Guild; N. Hernanz; P. de Hert; J. Jeandesboz; A. Scherrer

    2013-01-01

    The revelation of the top-secret US intelligence-led PRISM Programme has triggered wide-ranging debates across Europe. Press reports have shed new light on the electronic surveillance ‘fishing expeditions’ of the US National Security Agency and the FBI into the world’s largest electronic communicati

  16. Educational Software for Interactive Training of Students on the Theme "Mutual Intersecting of Pyramids and Prisms in Axonometry"

    Karaibryamov, Samet; Tsareva, Bistra; Zlatanov, Boyan

    2012-01-01

    This work acquaints with the program Sam for interactive computer training of students on the theme "Mutual intersecting of pyramids and prisms in axonometry". The program containing three modules--teacher, student and autopilot--allows for briefest time to teach and study the whole variety of the tasks on this theme. A classification of…

  17. A 900 electrostatic prism for microparticle beam steering on a 2 MV van der Graaff dust accelerator

    The design and construction of a 900 electrostatic prism is described. The device is used to deflect hypervelocity dust particles produced in a horizontal van der Graaff accelerator to simulate micrometeoroid impacts on dusty lunar and asteroidal surfaces where vertical incidence must be provided. (author)

  18. A Pilot Evaluation of On-Road Detection Performance by Drivers with Hemianopia Using Oblique Peripheral Prisms

    Alex R. Bowers

    2012-01-01

    Full Text Available Aims. Homonymous hemianopia (HH, a severe visual consequence of stroke, causes difficulties in detecting obstacles on the nonseeing (blind side. We conducted a pilot study to evaluate the effects of oblique peripheral prisms, a novel development in optical treatments for HH, on detection of unexpected hazards when driving. Methods. Twelve people with complete HH (median 49 years, range 29–68 completed road tests with sham oblique prism glasses (SP and real oblique prism glasses (RP. A masked evaluator rated driving performance along the 25 km routes on busy streets in Ghent, Belgium. Results. The proportion of satisfactory responses to unexpected hazards on the blind side was higher in the RP than the SP drive (80% versus 30%; P=0.001, but similar for unexpected hazards on the seeing side. Conclusions. These pilot data suggest that oblique peripheral prisms may improve responses of people with HH to blindside hazards when driving and provide the basis for a future, larger-sample clinical trial. Testing responses to unexpected hazards in areas of heavy vehicle and pedestrian traffic appears promising as a real-world outcome measure for future evaluations of HH rehabilitation interventions aimed at improving detection when driving.

  19. Palatini wormholes and energy conditions from the prism of General Relativity

    Bejarano, C; Olmo, Gonzalo J; Rubiera-Garcia, D

    2016-01-01

    Wormholes are hypothetical shortcuts in spacetime that in General Relativity unavoidably violate all of the pointwise energy conditions. In this paper, we consider several wormhole spacetimes that, as opposed to the standard \\emph{designer} procedure frequently employed in the literature, arise directly from gravitational actions including additional terms resulting from contractions of the Ricci tensor with the metric, and which are formulated assuming independence between metric and connection (Palatini approach). We reinterpret such wormhole solutions under the prism of General Relativity and study the matter sources that thread them. We discuss the size of violation of the energy conditions in different cases, and how this is related to the same spacetimes when viewed from the modified gravity side.

  20. Prism coupling characterization of planar optical waveguides made by silver ion exchange in glass

    Hidalgo, O.; Berencén, Y.; Rodríguez, J.

    2005-08-01

    A modified dark-lines method of prism-coupling technique is utilized for the experimental determination of the effective index of propagating modes in a glass planar waveguide. We use to make the waveguides a silver-sodium ion exchange in a nitrate solution and sodalime glass as substrate (microscope slides). The measurements were accomplished by direct HeNe laser beam incidence and sensing the reflected light by a Thorlabs Dec110 optical detector linked to a Protek500 digital multimeter. A LabView virtual instrument was implemented for the automation of the measurement process. The effective indexes measured have been used to calculate the refractive index profile by IWKB method. A comparison with other results shows that our experimental setup is suitable for slab waveguide modes characterization.

  1. Scattering from long prisms computed using ray tracing combined with diffraction on facets

    A new model suitable for rapid computation of scattering on faceted dielectric objects such as ice crystals is presented. It combines ray tracing with diffraction on flat facets. The model allows retaining the ray nature of the internal field by calculating the diffraction component using an approximation for the far field direction of the Poynting vector. While this approach is similar to methods using the uncertainty principle, it does not require the use of angular distributions of diffracted rays, which leads to negligible computational overheads with respect to pure ray tracing. Results showing angle-dependent scattering computed for long hexagonal prisms, including phase functions and degree of linear polarization, are presented and compared with other models and with measurements on hexagonal fibers

  2. Determination of the topological charge of a twisted beam with a Fresnel bi-prism

    The self-interference pattern of a Laguerre Gaussian beam using a Fresnel bi-prism is shown to be very different from what could be expected from a usual laser beam. It resembles the interference pattern that could be obtained using a double slit experiment. The interferences are shifted and the topological charge and its sign can be readily determined considering the shift order of the pattern only. However, since there is no diffraction nor absorption losses unlike in a double slit interference, such a set up could be used even for low power twisted beams or beams with high topological charge. Even fractional topological charges could be determined with an absolute precision of 0.05. (paper)

  3. Alternating prism exposure causes dual adaptation and generalization to a novel displacement

    Welch, Robert B.; Bridgeman, Bruce; Anand, Sulekha; Browman, Kaitlin E.

    1993-01-01

    In two experiments, we examined the hypothesis that repeatedly adapting and readapting to two mutually conflicting sensory environments fosters the development of a separate adaptation to each situation (dual adaptation) as well as an increased ability to adapt to a novel displacement (adaptive generalization). In the preliminary study, subjects alternated between adapting their visuomotor coordination to 30-diopter prismatic displacement and readapting to normal vision. Dual adaptation was observed by the end of 10 alternation cycles. However, an unconfounded test of adaptive generalization was prevented by an unexpected prism-adaptive shift in preexposure baselines for the dual-adapted subjects. In the primary experiment, the subjects adapted and readapted to opposite 15-diopter displacements for a total of 12 cycles. Both dual adaptation and adaptive generalization to a 30-diopter displacement were obtained. These findings may be understood in terms of serial reversal learning and 'learning to learn'.

  4. Astrophysical Information from Objective Prism Digitized Images: Classification with an Artificial Neural Network

    Bratsolis Emmanuel

    2005-01-01

    Full Text Available Stellar spectral classification is not only a tool for labeling individual stars but is also useful in studies of stellar population synthesis. Extracting the physical quantities from the digitized spectral plates involves three main stages: detection, extraction, and classification of spectra. Low-dispersion objective prism images have been used and automated methods have been developed. The detection and extraction problems have been presented in previous works. In this paper, we present a classification method based on an artificial neural network (ANN. We make a brief presentation of the entire automated system and we compare the new classification method with the previously used method of maximum correlation coefficient (MCC. Digitized photographic material has been used here. The method can also be used on CCD spectral images.

  5. The theoretic analysis of maskless surface plasmon resonant interference lithography by prism coupling

    The use of an attenuated total reflection-coupling mode of prism coated with metal film to excite the interference of the surface plasmon polaritons (SPPs) was proposed for periodic patterning with a resolution of subwavelength scale. High intensity of electric field can be obtained because of the coupling between SPPs and evanescence under a resonance condition, which can reduce exposure time and improve contrast. In this paper, several critical parameters for maskless surface plasmon resonant lithography are described, and the preliminary simulation based on a finite difference time-domain technique agrees well with the theoretical analysis, which demonstrates this scheme and provides the theoretical basis for further experiments. (classical areas of phenomenology)

  6. Localized surface plasmons in face to face dimer silver triangular prism nanoparticles

    Azarian, Abas; Babaei, Ferydon

    2016-05-01

    Using the discrete dipole approximation method, all plasmonic bands in 80 nm silver face to face dimer triangular prism nanoparticles were reported. The characteristics of plasmonics peaks were investigated with variations of dimer gap and refractive index of the surrounding medium of dimer. We found that there are three and four plasmonic bands, respectively, for dimer separation 2 and 4 nm. The extinction spectra and electric field distribution showed that the dipole-dipole interaction creates strong plasmonic band, but the quadrupole-quadrupole interaction relates to weak plasmonic band. The results revealed that the strong plasmonic bands have high sensitivity factors with respect to weak plasmonic bands. This study may be used in the synthesis of asymmetric dimers made of metal nanoparticles with new plasmonics properties.

  7. Influence of humidity and temperature on the corrosion of reinforced concrete prisms

    Reinforcement corrosion is one of the major durability problems that need to be solved in order to extend the service life of a structure. It is influenced, on one hand, by the concrete itself, sound or polluted (chlorinated or carbonated), and on the other hand, by the environmental conditions (controlled or outdoor). To explore the influence of temperature and humidity, electrochemical characterisations (potential, linear polarisation resistance and corrosion rate) were carried out on reinforced concrete prisms. A database of more than 3000 values has been delivered. The results enabled us to deduce that both parameters have influences on each other. Moreover, considering the four concretes, the corrosion order obtained in controlled conditions may be different from the one obtained in outdoor conditions. (authors)

  8. Large dynamic range SPR measurements in the visible using a ZnSe prism

    Canning, John; Cook, Kevin

    2015-01-01

    Large dynamic index measurement range (n = 1 to n = 1.7) using surface plasmon resonance (SPR) shifts is demonstrated with a ZnSe prism at 632.8 nm, limited by the available high index liquid hosts. In contrast to borosilicate based SPR measurements where angular limitations restrict solvent use to water and requires considerable care dealing with Fresnel reflections, the ZnSe approach allows SPR spectroscopies to be applied to a varied range of solvents An uncertainty in angular resolution between 1.5 and 6 deg, depending on the solvent and SPR angle, was estimated. The refractive index change for a given glucose concentration in water was measured to be n = (0.114 to 0.007) per precentage C6H12O6 conc. Given the transmission properties of ZnSe the processes can be readily extended into the mid infrared.

  9. Impacts of dichroic prism coatings on radiometry of the airborne imaging spectrometer APEX.

    Hueni, A; Schlaepfer, D; Jehle, M; Schaepman, M

    2014-08-20

    The generation of well-calibrated radiometric measurements from imaging spectrometer data requires careful consideration of all influencing factors, as well as an instrument calibration based on a detailed sensor model. Deviations of ambient parameters (i.e., pressure, humidity, temperature) from standard laboratory conditions during airborne operations can lead to biases that should be accounted for and properly compensated by using dedicated instrument models. This study introduces a model for the airborne imaging spectrometer airborne prism experiment (APEX), describing the impact of spectral shifts as well as polarization effects on the radiometric system response due to changing ambient parameters. Key issues are related to changing properties of the dichroic coating applied to the dispersing elements within the optical path. We present a model based on discrete numerical simulations. With the improved modeling approach, we predict radiometric biases with an root mean square error (RMSE) below 1%, leading to a substantial improvement of radiometric stability and predictability of system behavior. PMID:25321104

  10. On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms

    Fraternali, Fernando; Carpentieri, Gerardo; Amendola, Ada

    2015-01-01

    We study the geometrically nonlinear behavior of uniformly compressed tensegrity prisms through fully elastic and rigid-elastic models. The given models predict a variety of mechanical behaviors in the regime of large displacements, including an extreme stiffening-type response, already known in the literature, and a newly discovered, extreme softening behavior. The latter may lead to a snap buckling event producing an axial collapse of the structure. The switching from one mechanical regime to another depends on the aspect ratio of the structure, the magnitude of the applied prestress, and the material properties of the constituent elements. We discuss potential mechanical and acoustic applications of such behaviors, which are related to the design and manufacture of tensegrity lattices and innovative metamaterials.

  11. A linguistic picture of the world and expression of emotions through the prism of expressive lexis

    DANKA SIROKA

    2013-12-01

    Full Text Available This paper deals with expressive lexis, which is understood as the expression of emotions. Through this prism we would like to present a picture of the world which is formed by the opposites, emotional – rational. This picture would also present some examples of speech that is created in the mind as a result of man’s preferences and values. The relation of language and mind, formation of a picture of the world on the basis of both linguistic and extralinguistic foundations, projection of emotions and assessments on language – all of these components are inspiring avenues and this paper trys to enlighten the basis of expressive linguistic inventory of the users of the Slovak language. Keywords: ; ; ; ; ; ;

  12. Determination of the topological charge of a twisted beam with a Fresnel bi-prism

    Emile, Olivier; Emile, Janine; Brousseau, Christian

    2014-12-01

    The self-interference pattern of a Laguerre Gaussian beam using a Fresnel bi-prism is shown to be very different from what could be expected from a usual laser beam. It resembles the interference pattern that could be obtained using a double slit experiment. The interferences are shifted and the topological charge and its sign can be readily determined considering the shift order of the pattern only. However, since there is no diffraction nor absorption losses unlike in a double slit interference, such a set up could be used even for low power twisted beams or beams with high topological charge. Even fractional topological charges could be determined with an absolute precision of 0.05.

  13. Single-domain versus two-domain configuration in thin ferromagnetic prisms

    Thin ferromagnetic elements in the form of rectangular prisms are theoretically investigated in order to study the transition from single-domain to two-domain state, with changing the in-plane aspect ratio p. We address two main questions: first, how general is the transition; second, how the critical value pc depends on the physical parameters. We use two complementary methods: discrete-lattice calculations and a micromagnetic continuum approach. Ultrathin films do not appear to split in two domains. Instead, thicker films may undergo the above transition. We have used the continuum approach to analyze recent magnetic force microscopy observations in 30nm-thick patterned permalloy elements, finding a good agreement for pc

  14. Preliminary evaluation of CEA residual reagent recycling in Abbott ARCHITECT I2000SR%雅培ARCHITECT I2000SR化学发光CEA残余试剂再利用评估

    朱波; 沈伟; 黄家勤; 严莉; 彭宇生; 王鹏

    2013-01-01

    Objective To evaluate the performance of recycling about CEA residual reagent in Abbott ARCHITECT I2000SR. Methods Recycle combined residual reagents, to evaluate the detection precision and recovery, and in accordance with the Committee of Clinical Laboratory Standards (NCCLS) EP9-A2 document solutions, comparative tests with the original reagents. Results The residual reagent CEA batch precision is 2.84%-3.69%, inter-day precision is 3.28%-4.86%, the recovery rate is 92.31%-104.53%, are in line with the relevant provisions; the two reagent CEA correlation coefficient r=0.996, the regression equation is Y=1.049X-0.521.The expected bias (Bc) was within allowed bias on the medical decision level (Xc), so two methods can be accepted. Conclusion About Abbott Architect i2000SR, the performance of CEA residual reagents accords with clinical requirement and can be recycled.%目的:评估雅培ARCHITECT I2000SR化学发光仪CEA残余试剂再利用的性能。方法回收合并残余试剂,评价其检测精密度和回收率,并依据美国临床实验室标准化委员会(NCCLS)EP9-A2文件方案,与原装试剂进行对比试验。结果残余试剂检测CEA的批内精密度2.84%~3.69%,天间精密度3.28~4.86%,回收率为92.31%~104.53%,均符合相关规定;两种试剂检测CEA的相关系数r=0.996,回归方程为Y=1.049X-0.521,在各医学决定水平(Xc)的预期偏倚(Bc)在允许偏倚内,两方法相当,可以被接受。结论雅培ARCHITECT I2000SR化学发光仪CEA残余试剂的性能符合临床要求,可以回收再利用。

  15. Improved triangular prism methods for fractal analysis of remotely sensed images

    Zhou, Yu; Fung, Tung; Leung, Yee

    2016-05-01

    Feature extraction has been a major area of research in remote sensing, and fractal feature is a natural characterization of complex objects across scales. Extending on the modified triangular prism (MTP) method, we systematically discuss three factors closely related to the estimation of fractal dimensions of remotely sensed images. They are namely the (F1) number of steps, (F2) step size, and (F3) estimation accuracy of the facets' areas of the triangular prisms. Differing from the existing improved algorithms that separately consider these factors, we simultaneously take all factors to construct three new algorithms, namely the modification of the eight-pixel algorithm, the four corner and the moving-average MTP. Numerical experiments based on 4000 generated images show their superior performances over existing algorithms: our algorithms not only overcome the limitation of image size suffered by existing algorithms but also obtain similar average fractal dimension with smaller standard deviation, only 50% for images with high fractal dimensions. In the case of real-life application, our algorithms more likely obtain fractal dimensions within the theoretical range. Thus, the fractal nature uncovered by our algorithms is more reasonable in quantifying the complexity of remotely sensed images. Despite the similar performance of these three new algorithms, the moving-average MTP can mitigate the sensitivity of the MTP to noise and extreme values. Based on the numerical and real-life case study, we check the effect of the three factors, (F1)-(F3), and demonstrate that these three factors can be simultaneously considered for improving the performance of the MTP method.

  16. Generation of the 30 M-Mesh Global Digital Surface Model by Alos Prism

    Tadono, T.; Nagai, H.; Ishida, H.; Oda, F.; Naito, S.; Minakawa, K.; Iwamoto, H.

    2016-06-01

    Topographical information is fundamental to many geo-spatial related information and applications on Earth. Remote sensing satellites have the advantage in such fields because they are capable of global observation and repeatedly. Several satellite-based digital elevation datasets were provided to examine global terrains with medium resolutions e.g. the Shuttle Radar Topography Mission (SRTM), the global digital elevation model by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER GDEM). A new global digital surface model (DSM) dataset using the archived data of the Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM) onboard the Advanced Land Observing Satellite (ALOS, nicknamed "Daichi") has been completed on March 2016 by Japan Aerospace Exploration Agency (JAXA) collaborating with NTT DATA Corp. and Remote Sensing Technology Center, Japan. This project is called "ALOS World 3D" (AW3D), and its dataset consists of the global DSM dataset with 0.15 arcsec. pixel spacing (approx. 5 m mesh) and ortho-rectified PRISM image with 2.5 m resolution. JAXA is also processing the global DSM with 1 arcsec. spacing (approx. 30 m mesh) based on the AW3D DSM dataset, and partially releasing it free of charge, which calls "ALOS World 3D 30 m mesh" (AW3D30). The global AW3D30 dataset will be released on May 2016. This paper describes the processing status, a preliminary validation result of the AW3D30 DSM dataset, and its public release status. As a summary of the preliminary validation of AW3D30 DSM, 4.40 m (RMSE) of the height accuracy of the dataset was confirmed using 5,121 independent check points distributed in the world.

  17. UJI KETELITIAN HASIL KOREKSI GEOMETRIK CITRA SATELIT ALOS PRISM DENGAN HITUNG PERATAAN KUADRAT TERKECIL METODE PARAMETER

    Bambang Sudarsono

    2012-02-01

    Full Text Available Remote sensing is a branch science of Geodesy Engineering that using satellite applications for survey andmapping. One of the natural resources satellite that be used for mapping is Alos Satellite.It is own of Japan, italso could be used in 3D Application, especially Prism and Palsar. There are some methods for making 3Dapplication that are stereo mode, interferometry, and DSM2DEM. Geometric correction of this satellite is veryimportant so it needs a study for its statistical test. Alos satellite have 3D shape as Digital Terrain Model(DSM, not Digital Terrain Model (DTM, Digitallen HöheModellen (DHM, Digital Geoid Model (DGM orDigital Elevation Model (DEM. Alos satellite that be used are Alos Prism where it has spatial resolution in 2.5meter. The reference system of 3D model that are produced by Alos satellite image still as surface for z axis, forx axis and y axis has been closed to 2D reference system in some certain datum and system of map projection.So, this research will give result of its accuracy and precision and it could uses for the reference system.For its statistical test, it needs a method for checking its accuracy. It is least square adjustment in parametermethods. In case, it needs a research for observate the accuracy and precision of Alos satellite data using aleast square adjustment of parameter methods. Data from Alos satellite will be compared with data from Globalpositioning System (GPS of geodetic. The results of this research will be used as reference for next research toinvent a way for changing DSM from satellite, radar, air video and interferometry-automatically.

  18. MANAGING UNCERTAINTIES ASSOCIATED WITH RADIOACTIVE WASTE DISPOSAL: TASK GROUP 4 OF THE IAEA PRISM PROJECT

    Seitz, R.

    2011-03-02

    It is widely recognized that the results of safety assessment calculations provide an important contribution to the safety arguments for a disposal facility, but cannot in themselves adequately demonstrate the safety of the disposal system. The safety assessment and a broader range of arguments and activities need to be considered holistically to justify radioactive waste disposal at any particular site. Many programs are therefore moving towards the production of what has become known as a Safety Case, which includes all of the different activities that are conducted to demonstrate the safety of a disposal concept. Recognizing the growing interest in the concept of a Safety Case, the International Atomic Energy Agency (IAEA) is undertaking an intercomparison and harmonization project called PRISM (Practical Illustration and use of the Safety Case Concept in the Management of Near-surface Disposal). The PRISM project is organized into four Task Groups that address key aspects of the Safety Case concept: Task Group 1 - Understanding the Safety Case; Task Group 2 - Disposal facility design; Task Group 3 - Managing waste acceptance; and Task Group 4 - Managing uncertainty. This paper addresses the work of Task Group 4, which is investigating approaches for managing the uncertainties associated with near-surface disposal of radioactive waste and their consideration in the context of the Safety Case. Emphasis is placed on identifying a wide variety of approaches that can and have been used to manage different types of uncertainties, especially non-quantitative approaches that have not received as much attention in previous IAEA projects. This paper includes discussions of the current results of work on the task on managing uncertainty, including: the different circumstances being considered, the sources/types of uncertainties being addressed and some initial proposals for approaches that can be used to manage different types of uncertainties.

  19. Managing Uncertainties Associated With Radioactive Waste Disposal: Task Group 4 Of The IAEA PRISM Project

    It is widely recognized that the results of safety assessment calculations provide an important contribution to the safety arguments for a disposal facility, but cannot in themselves adequately demonstrate the safety of the disposal system. The safety assessment and a broader range of arguments and activities need to be considered holistically to justify radioactive waste disposal at any particular site. Many programs are therefore moving towards the production of what has become known as a Safety Case, which includes all of the different activities that are conducted to demonstrate the safety of a disposal concept. Recognizing the growing interest in the concept of a Safety Case, the International Atomic Energy Agency (IAEA) is undertaking an intercomparison and harmonization project called PRISM (Practical Illustration and use of the Safety Case Concept in the Management of Near-surface Disposal). The PRISM project is organized into four Task Groups that address key aspects of the Safety Case concept: Task Group 1 - Understanding the Safety Case; Task Group 2 - Disposal facility design; Task Group 3 - Managing waste acceptance; and Task Group 4 - Managing uncertainty. This paper addresses the work of Task Group 4, which is investigating approaches for managing the uncertainties associated with near-surface disposal of radioactive waste and their consideration in the context of the Safety Case. Emphasis is placed on identifying a wide variety of approaches that can and have been used to manage different types of uncertainties, especially non-quantitative approaches that have not received as much attention in previous IAEA projects. This paper includes discussions of the current results of work on the task on managing uncertainty, including: the different circumstances being considered, the sources/types of uncertainties being addressed and some initial proposals for approaches that can be used to manage different types of uncertainties.

  20. Preapplication safety evaluation report for the Power Reactor Innovative Small Module (PRISM) liquid-metal reactor. Final report

    Donoghue, J.E.; Donohew, J.N.; Golub, G.R.; Kenneally, R.M.; Moore, P.B.; Sands, S.P.; Throm, E.D.; Wetzel, B.A. [Nuclear Regulatory Commission, Washington, DC (United States). Associate Directorate for Advanced Reactors and License Renewal

    1994-02-01

    This preapplication safety evaluation report (PSER) presents the results of the preapplication desip review for die Power Reactor Innovative Small Module (PRISM) liquid-mew (sodium)-cooled reactor, Nuclear Regulatory Commission (NRC) Project No. 674. The PRISM conceptual desip was submitted by the US Department of Energy in accordance with the NRC`s ``Statement of Policy for the Regulation of Advanced Nuclear Power Plants`` (51 Federal Register 24643). This policy provides for the early Commission review and interaction with designers and licensees. The PRISM reactor desip is a small, modular, pool-type, liquid-mew (sodium)-cooled reactor. The standard plant design consists of dim identical power blocks with a total electrical output rating of 1395 MWe- Each power block comprises three reactor modules, each with a thermal rating of 471 MWt. Each module is located in its own below-grade silo and is co to its own intermediate heat transport system and steam generator system. The reactors utilize a metallic-type fuel, a ternary alloy of U-Pu-Zr. The design includes passive reactor shutdown and passive decay heat removal features. The PSER is the NRC`s preliminary evaluation of the safety features in the PRISM design, including the projected research and development programs required to support the design and the proposed testing needs. Because the NRC review was based on a conceptual design, the PSER did not result in an approval of the design. Instead it identified certain key safety issues, provided some guidance on applicable licensing criteria, assessed the adequacy of the preapplicant`s research and development programs, and concluded that no obvious impediments to licensing the PRISM design had been identified.

  1. Improved mapping of National Atmospheric Deposition Program wet-deposition in complex terrain using PRISM-gridded data sets

    Latysh, Natalie E.; Wetherbee, Gregory Alan

    2012-01-01

    High-elevation regions in the United States lack detailed atmospheric wet-deposition data. The National Atmospheric Deposition Program/National Trends Network (NADP/NTN) measures and reports precipitation amounts and chemical constituent concentration and deposition data for the United States on annual isopleth maps using inverse distance weighted (IDW) interpolation methods. This interpolation for unsampled areas does not account for topographic influences. Therefore, NADP/NTN isopleth maps lack detail and potentially underestimate wet deposition in high-elevation regions. The NADP/NTN wet-deposition maps may be improved using precipitation grids generated by other networks. The Parameter-elevation Regressions on Independent Slopes Model (PRISM) produces digital grids of precipitation estimates from many precipitation-monitoring networks and incorporates influences of topographical and geographical features. Because NADP/NTN ion concentrations do not vary with elevation as much as precipitation depths, PRISM is used with unadjusted NADP/NTN data in this paper to calculate ion wet deposition in complex terrain to yield more accurate and detailed isopleth deposition maps in complex terrain. PRISM precipitation estimates generally exceed NADP/NTN precipitation estimates for coastal and mountainous regions in the western United States. NADP/NTN precipitation estimates generally exceed PRISM precipitation estimates for leeward mountainous regions in Washington, Oregon, and Nevada, where abrupt changes in precipitation depths induced by topography are not depicted by IDW interpolation. PRISM-based deposition estimates for nitrate can exceed NADP/NTN estimates by more than 100% for mountainous regions in the western United States.

  2. Position indeterminacy

    Calculations assuming position indeterminacy in the Dirac equation are reported. Energy shift contributions for low-lying states of hydrogen-like atoms are calculated by treating the position indeterminacy as a perturbation additional to standard quantum mechanics. The results are consistent with the current discrepancy between theory and experiment for Lamb shifts in hydrogen, deuterium and the helium ion. Copyright (2000) CSIRO Australia

  3. Positive Psychotherapy

    Seligman, Martin E. P.; Rashid, Tayyab; Parks, Acacia C.

    2006-01-01

    Positive psychotherapy (PPT) contrasts with standard interventions for depression by increasing positive emotion, engagement, and meaning rather than directly targeting depressive symptoms. The authors have tested the effects of these interventions in a variety of settings. In informal student and clinical settings, people not uncommonly reported…

  4. Positioning support

    A positioning support for infants during X-ray examinations is described. The support which can be placed on the X-ray examination table has a simple structure and can easily be handled. It guarantees a stable positioning of the patient at a short object-film distance

  5. Use of a Novel Visual Metaphor Measure (PRISM) to Evaluate School Children's Perceptions of Natural Hazards, Sources of Hazard Information, Hazard Mitigation Organizations, and the Effectiveness of Future Hazard Education Programs in Dominica, Eastern Car

    Parham, Martin; Day, Simon; Teeuw, Richard; Solana, Carmen; Sensky, Tom

    2015-04-01

    This project aims to study the development of understanding of natural hazards (and of hazard mitigation) from the age of 11 to the age of 15 in secondary school children from 5 geographically and socially different schools on Dominica, through repeated interviews with the students and their teachers. These interviews will be coupled with a structured course of hazard education in the Geography syllabus; the students not taking Geography will form a control group. To avoid distortion of our results arising from the developing verbalization and literacy skills of the students over the 5 years of the project, we have adapted the PRISM tool used in clinical practice to assess patient perceptions of illness and treatment (Buchi & Sensky, 1999). This novel measure is essentially non-verbal, and uses spatial positions of moveable markers ("object" markers) on a board, relative to a fixed marker that represents the subject's "self", as a visual metaphor for the importance of the object to the subject. The subjects also explain their reasons for placing the markers as they have, to provide additional qualitative information. The PRISM method thus produces data on the perceptions measured on the board that can be subjected to statistical analysis, and also succinct qualitative data about each subject. Our study will gather data on participants' perceptions of different natural hazards, different sources of information about these, and organizations or individuals to whom they would go for help in a disaster, and investigate how these vary with geographical and social factors. To illustrate the method, which is generalisable, we present results from our initial interviews of the cohort of 11 year olds whom we will follow through their secondary school education. Büchi, S., & Sensky, T. (1999). PRISM: Pictorial Representation of Illness and Self Measure: a brief nonverbal measure of illness impact and therapeutic aid in psychosomatic medicine. Psychosomatics, 40(4), 314-320.

  6. Use of a Novel Visual Metaphor Measure (PRISM) to Evaluate School Children's Perceptions of Natural Hazards, Sources of Hazard Information, Hazard Mitigation Organizations, and the Effectiveness of Future Hazard Education Programs in Dominica, Eastern Caribbean

    Parham, M.; Day, S. J.; Teeuw, R. M.; Solana, C.; Sensky, T.

    2014-12-01

    This project aims to study the development of understanding of natural hazards (and of hazard mitigation) from the age of 11 to the age of 15 in secondary school children from 5 geographically and socially different schools on Dominica, through repeated interviews with the students and their teachers. These interviews will be coupled with a structured course of hazard education in the Geography syllabus; the students not taking Geography will form a control group. To avoid distortion of our results arising from the developing verbalization and literacy skills of the students over the 5 years of the project, we have adapted the PRISM tool used in clinical practice to assess patient perceptions of illness and treatment (Buchi & Sensky, 1999). This novel measure is essentially non-verbal, and uses spatial positions of moveable markers ("object" markers) on a board, relative to a fixed marker that represents the subject's "self", as a visual metaphor for the importance of the object to the subject. The subjects also explain their reasons for placing the markers as they have, to provide additional qualitative information. The PRISM method thus produces data on the perceptions measured on the board that can be subjected to statistical analysis, and also succinct qualitative data about each subject. Our study will gather data on participants' perceptions of different natural hazards, different sources of information about these, and organizations or individuals to whom they would go for help in a disaster, and investigate how these vary with geographical and social factors. To illustrate the method, which is generalisable, we present results from our initial interviews of the cohort of 11 year olds whom we will follow through their secondary school education.Büchi, S., & Sensky, T. (1999). PRISM: Pictorial Representation of Illness and Self Measure: a brief nonverbal measure of illness impact and therapeutic aid in psychosomatic medicine. Psychosomatics, 40(4), 314-320.

  7. Positioning consumption

    Halkier, Bente; Keller, Margit

    2014-01-01

    This article analyses the ways in which media discourses become a part of contested consumption activities. We apply a positioning perspective with practice theory to focus on how practitioners relate to media discourse as a symbolic resource in their everyday practices. A typology of performance...... discourse, practitioners attempt to maintain their self-positioning of competence when performing. This leads us, as researchers, to caution against any a priori anticipation of the anchoring power of media discourses within everyday activities....... positionings emerges based on empirical examples of research in parent–children consumption. Positionings are flexible discursive fixations of the relationship between the performances of the practitioner, other practitioners, media discourse and consumption activities. The basic positioning types...

  8. Synthesis of hexagonal wurtzite Cu{sub 2}ZnSnS{sub 4} prisms by an ultrasound-assisted microwave solvothermal method

    Long, Fei, E-mail: long.drf@gmail.com [Key Laboratory of New Processing Technology for Nonferrous Metals and Materials of Ministry of Education, Guilin University of Technology, Guilin 541004 (China); Chi, Shangsen [Key Laboratory of New Processing Technology for Nonferrous Metals and Materials of Ministry of Education, Guilin University of Technology, Guilin 541004 (China); Institute of Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083 (China); He, Jinyun; Wang, Jilin; Wu, Xiaoli; Mo, Shuyi; Zou, Zhengguang [Key Laboratory of New Processing Technology for Nonferrous Metals and Materials of Ministry of Education, Guilin University of Technology, Guilin 541004 (China)

    2015-09-15

    Wurtzite Cu{sub 2}ZnSnS{sub 4} (CZTS) hexagonal prisms were synthesized by a simple ultrasound-microwave solvothermal method. The product was characterized by XRD, FESEM, EDS, TEM, Raman and UV–vis spectrometer. The hexagonal prisms were 0.5–2 μm wide and 5–12 μm long. The PVP played an important role in the formation of the CZTS hexagonal prisms. In addition, the ultrasound-assisted microwave process was helpful for synthesis of wurtzite rather than kesterite phase CZTS. A nucleation–dissolution–recrystallization mechanism was also proposed to explain the growth of the CZTS hexagonal prisms. - Graphical abstract: Wurtzite Cu{sub 2}ZnSnS{sub 4} hexagonal prisms were synthesized by ultrasound-microwave solvothermal method. The ultrasound-assisted microwave process and PVP were useful to the growth of CZTS. A nucleation–dissolution–recrystallization growth mechanism was also proposed. - Highlights: • Wurtzite Cu{sub 2}ZnSnS{sub 4} was prepared by ultrasound-assisted microwave solvothermal method. • The wurtzite CZTS hexagonal prisms are demonstrated a band gap of 1.49 eV. • Synergistic effect of ultrasound and microwave is helpful to prepare Wurtzite CZTS. • PVP plays an important role in the formation of the CZTS hexagonal prisms. • Nucleation–dissolution–recrystallization growth mechanism of the CZTS was proposed.

  9. Researcher Positioning

    Khawaja, Iram; Mørck, Line Lerche

    2009-01-01

    This article focuses on the complex and multilayered process of researcher positioning,specifically in relation to the politically sensitive study of marginalised and "othered"groups such as Muslims living in Denmark. We discuss the impact of different ethnic,religious, and racial backgrounds, of...... involvement by the researcher, which challenges traditional perspectives onresearch and researcher positioning. A key point in this regard is the importance ofconstant awareness of and reflection on the multiple ways in which one's positioningas a researcher influences the research process. Studying the other...... calls for closereflections on one's own position, theoretically, personally, and politically, taking intoaccount one's complicity in either overcoming or reproducing processes of otheringand marginalisation....

  10. Prism adaptation does not alter configural processing of faces [v1; ref status: indexed, http://f1000r.es/1wk

    Janet H. Bultitude

    2013-10-01

    Full Text Available Patients with hemispatial neglect (‘neglect’ following a brain lesion show difficulty responding or orienting to objects and events on the left side of space. Substantial evidence supports the use of a sensorimotor training technique called prism adaptation as a treatment for neglect. Reaching for visual targets viewed through prismatic lenses that induce a rightward shift in the visual image results in a leftward recalibration of reaching movements that is accompanied by a reduction of symptoms in patients with neglect. The understanding of prism adaptation has also been advanced through studies of healthy participants, in whom adaptation to leftward prismatic shifts results in temporary neglect-like performance. Interestingly, prism adaptation can also alter aspects of non-lateralised spatial attention. We previously demonstrated that prism adaptation alters the extent to which neglect patients and healthy participants process local features versus global configurations of visual stimuli. Since deficits in non-lateralised spatial attention are thought to contribute to the severity of neglect symptoms, it is possible that the effect of prism adaptation on these deficits contributes to its efficacy. This study examines the pervasiveness of the effects of prism adaptation on perception by examining the effect of prism adaptation on configural face processing using a composite face task. The composite face task is a persuasive demonstration of the automatic global-level processing of faces: the top and bottom halves of two familiar faces form a seemingly new, unknown face when viewed together. Participants identified the top or bottom halves of composite faces before and after prism adaptation. Sensorimotor adaptation was confirmed by significant pointing aftereffect, however there was no significant change in the extent to which the irrelevant face half interfered with processing. The results support the proposal that the therapeutic effects

  11. Researcher positioning

    Mørck, Line Lerche; Khawaja, Iram

    2009-01-01

    abstract  This article focuses on the complex and multi-layered process of researcher positioning, specifically in relation to the politically sensitive study of marginalised and ‘othered' groups such as Muslims living in Denmark. We discuss the impact of different ethnic, religious and racial...... political and personal involvement by the researcher, which challenges traditional perspectives on research and researcher positioning. A key point in this regard is the importance of constant awareness of and reflection on the multiple ways in which one's positioning as a researcher influences the research...... process. Studying the other calls for close reflections on one's own position, theoretically, personally, and politically, taking into account one's complicity in either overcoming or reproducing processes of othering and marginalisation. [i] We use the term (ethnic) minoritised, not as a distinction with...

  12. Nuclear Positioning

    Gundersen, Gregg G.; Worman, Howard J.

    2013-01-01

    The nucleus is the largest organelle and is commonly depicted in the center of the cell. Yet during cell division, migration and differentiation, it frequently moves to an asymmetric position aligned with cell function. We consider the toolbox of proteins that move and anchor the nucleus within the cell and how forces generated by the cytoskeleton are coupled to the nucleus to move it. The significance of proper nuclear positioning is underscored by numerous diseases resulting from genetic al...

  13. Comparative analysis of Sysmex KX-21 and Abbott CELL-DYN 3700 for routine blood test%血常规检验在希森美康和雅培检测系统的结果分析

    唐葵; 罗建科

    2013-01-01

    目的探索如何解决雅培血球质控品因有效期短、国内无经营许可证导致境外采购,经常供应不及时造成没有室内质控怎么保证血常规检验结果准确可靠的问题。方法将58份新鲜标本同时在希森美康KX-21和雅培CELL-DYN 3700血球仪上检测,比较7个主要指标的均值、相关性。结果白细胞计数(WBC)、红细胞计数(RBC)、血红蛋白(Hb)、血小板计数(PLT )、血细胞比容(Hct)、淋巴细胞百分比(LYM%)、中性粒细胞百分比(NEU%)等指标在希森美康和雅培血球仪上检测均值分别为WBC(10.36±11.70)、(11.47±12.98)×109/L ,RBC (3.46±0.87)×1012/L、(3.56±0.89)×1012/L,Hb(94.8±19.8)、(95.5±19.9)g/L,PLT(174±170)×109/L、(173±161)×109/L ,Hct(30.5±6.4)%、(27.6±5.9)%,LYM%(16.4±12.8)%、(16.5±12.4)%,NEU%(73.7±18.3)%、(74.2±17.8)%,相关性分别为1,1,1,1,0.98,0.84,0.89,两个系统检测相比较,Hct差异有统计学意义(P<0.01),其余6项差异无统计学意义(P>0.05)。结论日常工作中,在保证希森美康血球仪在控的前提下,每天抽取3个标本(最好包含高、中、低值)在两个系统上比对,同时调整 Hct参数为1.11,可以保证用雅培血球仪检测结果的准确性。%Objective To explore how to ensure the accuracy and reliability of Abbott CELL-DYN 3700 for routine blood test .Methods 58 fresh specimens were detected both in Sysmex KX-21 and Abbott CELL-DYN 3700 at the same time ,mean values and correlation of the seven major indicators were compared .Results The values of white blood cell count (WBC) ,red blood cell count (RBC) ,hemoglobin (Hb) ,blood platelet count (PLT) ,hema-tokrit (Hct) ,lymphocyte percentage (LYM% ) and neutrophils percentage (NEU% ) ,detected by Sysmex KX-21 were

  14. Eu{sup 3+}-doped Y{sub 2}O{sub 3} hexagonal prisms: Shape-controlled synthesis and tailored luminescence properties

    Yang, Errui [Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Li, Guangshe [Fujian Provincial Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Fu, Chaochao; Zheng, Jing [Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Huang, Xinsong [Fujian Provincial Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Xu, Wen [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); Li, Liping, E-mail: lipingli@fjirsm.ac.cn [Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China)

    2015-10-25

    In this work, Eu{sup 3+} doped Y{sub 2}O{sub 3} hexagonal prisms were synthesized by a novel two-phase approach, which involves water at the bottom as aqueous phase and oleylamine in the above as oil phase. With this unique reaction system, precursors of hexagonal prisms Y{sub 4}O(OH){sub 9}(NO{sub 3}) were first obtained by simply varying the volume ratio of water to oleylamine. Time-dependent experiments were systematically performed to reveal the growth mechanism of the precursor. After subsequent heat treatment, these precursors transformed to Y{sub 2}O{sub 3} hexagonal prisms with controlled diameters and aspect ratios varying from 4 to 19. Such a transformation is preceded via a topotactic process, as indicated by TG-DTA and mass spectra. Eventually, all Eu{sup 3+} doped Y{sub 2}O{sub 3} hexagonal prisms were found to exhibit an intensive red emission at 611 nm, which corresponds to {sup 5}D{sub 0}→{sup 7}F{sub 2} transition of Eu{sup 3+}. With varying the aspect ratio of hexagonal prisms and increasing Eu{sup 3+} concentration in Y{sub 2}O{sub 3}, an optimum external quantum efficiency was achieved. - Graphical abstract: In this work, Eu{sup 3+} doped Y{sub 2}O{sub 3} hexagonal prisms with controlled aspect ratio from 4.4 to 19.3 were synthesized by transformation of the precursor Y{sub 4}O(OH){sub 9}(NO{sub 3}) hexagonal prisms from a novel two-phase reaction system. The growth mechanism of the precursor has been systematically investigated, and a topotactic phase transformation from precursors to cubic Y{sub 2}O{sub 3} is for the first time put forward. By the size controlling and aspect ratio adjusting, the luminescence emission intensity as well as external quantum efficiency of Eu{sup 3+} doped Y{sub 2}O{sub 3} hexagonal prisms is further tailored to show an optimum. - Highlights: • Eu{sup 3+} doped Y{sub 2}O{sub 3} hexagonal prisms were synthesized by a novel two-phase approach. • Inheriting mechanism of prisms morphology from Y{sub 4}O(OH){sub 9

  15. PRISM (processes research by an imaging spaceborne mission) high-resolution hyperspectral imager for scientific land processes monitoring applications

    Kunkel, Bernd P.; Blechinger, Fritz; Lutz, Reinhold; Posselt, Winfried; Del Bello, Umberto; Meynart, Roland; Lobb, Daniel R.; Saint-Pe, Olivier

    1995-11-01

    Dasa (Daimler-Benz Aerospace) currently is in charge of an ESA contract for the PRISM feasibility study, including MATRA MS/France and SIRA/UK. The main PRISM mission objectives are to monitor selected target areas with emphasis on bio-chemical stress analyses which are the subject of changes such as vegetation, in particular deforestation; further areas include glaciers, land/water boundaries, and similar features. The Dasa study team makes use of a similar ESA instrument currently the subject of dedicated subunits technology developments, the HRIS (high resolution imaging spectrometer), also lead by Dasa. Its main features and technology developments are covered in a survey. PRISM is covering most of the HRIS features, i.e., it will have an imaging spectrometer segment for the visible/NIR and the SWIR spectrum (450-2350 nm) as HRIS, but implements four MIR and TIR channels to provide surface temperature data, represented by linear detector arrays (essentially the features of another currently pursued ESA development program designated HRTIR). In a first study phase it also included a novel feature, a wide-angle two-axis pointing system for along- and across-track pointing in order to yield multi-directional reflectance data of dedicated targets, which turned out to be the greatest design driver in the instrument, it was omitted in the later phases. The geometric sampling interval is defined to 50 m (design goal) at 50 km swath. PRISM is currently studied in a feasibility study in a competitive way by two teams, one being lead by Dasa. At the time of the Symposium both studies are completed. The results of the Dasa team are presented. Since PRISM covers most of the HRIS mission it is rather likely that in the case of a successful concept feasibility proof (performance and technology wise), it may later replace the HRIS instrument. It is anticipated that a major part of the technology developments currently performed for HRIS will be utilized -- with some

  16. Positional games

    Hefetz, Dan; Stojaković, Miloš; Szabó, Tibor

    2014-01-01

    This text serves as a thorough introduction to the rapidly developing field of positional games. This area constitutes an important branch of combinatorics, whose aim it is to systematically develop an extensive mathematical basis for a variety of two-player perfect information games. These range from such popular games as Tic-Tac-Toe and Hex to purely abstract games played on graphs and hypergraphs. The subject of positional games is strongly related to several other branches of combinatorics such as Ramsey theory, extremal graph and set theory, and the probabilistic method. These notes cover a variety of topics in positional games, including both classical results and recent important developments. They are presented in an accessible way and are accompanied by exercises of varying difficulty, helping the reader to better understand the theory. The text will benefit both researchers and graduate students in combinatorics and adjacent fields.

  17. Probabilistic models of state estimation predict visuomotor transformations during prism adaptation.

    Yamamoto, Masaki; Ando, Hiroshi

    2012-03-01

    This study aims to create a prediction model for state-space estimation and to elucidate the required information processing for identifying an external space in prism adaptation. Subjects were 57 healthy students. The subjects were instructed to rapidly perform reaching movements to one of the randomly illuminating light-emitting diode lights. Their movements were measured while wearing prism glasses and after removing that. We provided the following four conditions and control. In target condition, reaching error distance was visually fed back to the subject. In trajectory condition, the trajectory of fingertip movement could be seen, and the final reaching error was not fed back. Two restricted visual feedback conditions were prepared based on a different presentation timing (on-time and late-time conditions). We set up a linear parametric model and an estimation model using Kalman filtering. The goodness of fit between the estimated and observed values in each model was examined using Akaike information criterion (AIC). AIC would be one way to evaluate two models with different number of parameters. In the control, the value of AIC was 179.0 and 154.0 for the linear model and Kalman filtering, respectively, while these values were 173.6 and 161.1 for the target condition, 202.8 and 159.7 for the trajectory condition, 192.7 and 180.8 for the on-time condition, and 206.9 and 174.0 for the late-time condition. Kalman gain in the control was 0.07-0.26. Kalman gain relies on the prior estimation distribution when its value is below 0.5. Kalman gain in the trajectory and late-time conditions was 0.03-0.60 and 0.08-0.95, respectively. The Kalman filter, a state estimation model based on Bayesian theory, expressed the dynamics of the internal model under uncertain feedback information better than the linear parametric model. The probabilistic estimation model can clearly simulate state estimation according to the reliability of the visual feedback. PMID:22391218

  18. Prism Adaptation Alters Electrophysiological Markers of Attentional Processes in the Healthy Brain.

    Martín-Arévalo, Elisa; Laube, Inga; Koun, Eric; Farnè, Alessandro; Reilly, Karen T; Pisella, Laure

    2016-01-20

    Neglect patients typically show a rightward attentional orienting bias and a strong disengagement deficit, such that they are especially slow in responding to left-sided targets after right-sided cues (Posner et al., 1984). Prism adaptation (PA) can reduce diverse debilitating neglect symptoms and it has been hypothesized that PA's effects are so generalized that they might be mediated by attentional mechanisms (Pisella et al., 2006; Redding and Wallace, 2006). In neglect patients, performance on spatial attention tasks improves after rightward-deviating PA (Jacquin-Courtois et al., 2013). In contrast, in healthy subjects, although there is evidence that leftward-deviating PA induces neglect-like performance on some visuospatial tasks, behavioral studies of spatial attention tasks have mostly yielded negative results (Morris et al., 2004; Bultitude et al., 2013). We hypothesized that these negative behavioral findings might reflect the limitations of behavioral measures in healthy subjects. Here we exploited the sensitivity of event-related potentials to test the hypothesis that electrophysiological markers of attentional processes in the healthy human brain are affected by PA. Leftward-deviating PA generated asymmetries in attentional orienting (reflected in the cue-locked N1) and in attentional disengagement for invalidly cued left targets (reflected in the target-locked P1). This is the first electrophysiological demonstration that leftward-deviating PA in healthy subjects mimics attentional patterns typically seen in neglect patients. Significance statement: Prism adaptation (PA) is a promising tool for ameliorating many deficits in neglect patients and inducing neglect-like behavior in healthy subjects. The mechanisms underlying PA's effects are poorly understood but one hypothesis suggests that it acts by modulating attention. To date, however, there has been no successful demonstration of attentional modulation in healthy subjects. We provide the first

  19. Positive psychotherapy.

    Seligman, Martin E P; Rashid, Tayyab; Parks, Acacia C

    2006-11-01

    Positive psychotherapy (PPT) contrasts with standard interventions for depression by increasing positive emotion, engagement, and meaning rather than directly targeting depressive symptoms. The authors have tested the effects of these interventions in a variety of settings. In informal student and clinical settings, people not uncommonly reported them to be "life-changing." Delivered on the Web, positive psychology exercises relieved depressive symptoms for at least 6 months compared with placebo interventions, the effects of which lasted less than a week. In severe depression, the effects of these Web exercises were particularly striking. This address reports two preliminary studies: In the first, PPT delivered to groups significantly decreased levels of mild-to-moderate depression through 1-year follow-up. In the second, PPT delivered to individuals produced higher remission rates than did treatment as usual and treatment as usual plus medication among outpatients with major depressive disorder. Together, these studies suggest that treatments for depression may usefully be supplemented by exercises that explicitly increase positive emotion, engagement, and meaning. ((c) 2006 APA, all rights reserved). PMID:17115810

  20. Web-based Tools for Educators: Outreach Activities of the Polar Radar for Ice Sheet Measurements (PRISM) Project

    Braaten, D. A.; Holvoet, J. F.; Gogineni, S.

    2003-12-01

    The Radar Systems and Remote Sensing Laboratory at the University of Kansas (KU) has implemented extensive outreach activities focusing on Polar Regions as part of the Polar Radar for Ice Sheet Measurements (PRISM) project. The PRISM project is developing advanced intelligent remote sensing technology that involves radar systems, an autonomous rover, and communications systems to measure detailed ice sheet characteristics, and to determine bed conditions (frozen or wet) below active ice sheets in both Greenland and Antarctica. These measurements will provide a better understanding of the response of polar ice sheets to global climate change and the resulting impact the ice sheets will have on sea level rise. Many of the research and technological development aspects of the PRISM project, such as robotics, radar systems, climate change and exploration of harsh environments, can kindle an excitement and interest in students about science and technology. These topics form the core of our K-12 education and training outreach initiatives, which are designed to capture the imagination of young students, and prompt them to consider an educational path that will lead them to scientific or engineering careers. The K-12 PRISM outreach initiatives are being developed and implemented in a collaboration with the Advanced Learning Technology Program (ALTec) of the High Plains Regional Technology in Education Consortium (HPR*TEC). ALTec is associated with the KU School of Education, and is a well-established educational research center that develops and hosts web tools to enable teachers nationwide to network, collaborate, and share resources with other teachers. An example of an innovative and successful web interface developed by ALTec is called TrackStar. Teachers can use TrackStar over the Web to develop interactive, resource-based lessons (called tracks) on-line for their students. Once developed, tracks are added to the TrackStar database and can be accessed and modified

  1. Anodic-hydrothermal preparation of prism-shaped CaTiO3 structure on titanium surface

    The prism-shaped perovskite structure of CaTiO3 on titanium surface was fabricated by an anodic-hydrothermal method. Firstly, the TiO2 film was formed on Ti substrate by electrochemical anodization. Secondly, the anodized TiO2/Ti substrate was used as a template for the hydrothermal synthesis of CaTiO3 coating. The samples were characterized with X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectrum. The experimental results show that anodic TiO2 substrate and alkali environment are key factors for the formation of prism-shaped CaTiO3, and the NaOH concentrations plays an important role in determining the size and shape of CaTiO3 structures. Meanwhile, the CaTiO3 surfaces possess the better deposition ability of Ca and P in vitro.

  2. Contrasting décollement and prism properties over the Sumatra 2004-2005 earthquake rupture boundary.

    Dean, Simon M; McNeill, Lisa C; Henstock, Timothy J; Bull, Jonathan M; Gulick, Sean P S; Austin, James A; Bangs, Nathan L B; Djajadihardja, Yusuf S; Permana, Haryadi

    2010-07-01

    Styles of subduction zone deformation and earthquake rupture dynamics are strongly linked, jointly influencing hazard potential. Seismic reflection profiles across the trench west of Sumatra, Indonesia, show differences across the boundary between the major 2004 and 2005 plate interface earthquakes, which exhibited contrasting earthquake rupture and tsunami generation. In the southern part of the 2004 rupture, we interpret a negative-polarity sedimentary reflector approximately 500 meters above the subducting oceanic basement as the seaward extension of the plate interface. This predécollement reflector corresponds to unusual prism structure, morphology, and seismogenic behavior that are absent along the 2005 rupture zone. Although margins like the 2004 rupture zone are globally rare, our results suggest that sediment properties influence earthquake rupture, tsunami hazard, and prism development at subducting plate boundaries. PMID:20616276

  3. Basal and prism dislocation cores in magnesium: comparison of first-principles and embedded-atom-potential methods predictions

    The core structures of screw and edge dislocations on the basal and prism planes in Mg, and the associated gamma surfaces, were studied using an ab initio method and the embedded-atom-method interatomic potentials developed by Sun et al and Liu et al. The ab initio calculations predict that the basal plane dislocations dissociate into partials split by 16.7 Å (edge) and 6.3 Å (screw), as compared with 14.3 Å and 12.7 Å (Sun and Liu edge), and 6.3 Å and 1.4 Å (Sun and Liu screw), with the Liu screw dislocation being metastable. In the prism plane, the screw and edge cores are compact and the edge core structures are all similar, while ab initio does not predict a stable prismatic screw in stress-free conditions. These results are qualitatively understood through an examination of the gamma surfaces for interplanar sliding on the basal and prism planes. The Peierls stresses at T = 0 K for basal slip are a few megapascals for the Sun potential, in agreement with experiments, but are ten times larger for the Liu potential. The Peierls stresses for prism slip are 10–40 MPa for both potentials. Overall, the dislocation core structures from ab initio are well represented by the Sun potential in all cases while the Liu potential shows some notable differences. These results suggest that the Sun potential is preferable for studying other dislocations in Mg, particularly the (c + a) dislocations, for which the core structures are much larger and not accessible by ab initio methods

  4. Single-frequency diode-pumped Nd:YAG prism laser with use of a composite laser crystal

    Pedersen, Christian; Hansen, P. L.; Buchhave, Preben; Skettrup, Torben

    1997-01-01

    A compact, stable, diode-pumped Nd:YAG laser suitable for high-power single-frequency operation is investigated theoretically as well as experimentally. Residual spatial hole burning has been eliminated with a unidirectional ring-laser design with a specially designed intracavity prism and a...... composite YAG laser crystal. A detailed Jones matrix analysis is performed, leading to design criteria for high loss difference and high-frequency stability....

  5. Economy of capital construction product quality through the prism of the evolution of tax processes in Ukraine

    Iastrebova Ganna

    2013-01-01

    The article is devoted to the study of the modern state and methods of assessment of quality of products of capital construction companies through the prism of the evolution of tax processes in Ukraine. It considers specific features of quality economy against the background of evolution processes in Ukraine, marks out the role of the capital construction branch, and determines a significant role of quality of products of the construction company in connection with their role as tax payers. I...

  6. A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms

    Moradabadi, Ehsan; Laefer, Debra F.; Clarke, Julie; Lourenço, Paulo B.

    2015-01-01

    An accurate prediction of the compressive strength of masonry is essential both for the analysis of existing structures and the construction of new masonry buildings. Since experimental material testing of individual masonry components (e.g. masonry unit and mortar joints) often produces highly variable results, this paper presents a numerical modelling based approach to address the associated uncertainty for the prediction of the maximum compressive load of masonry prisms. The method conside...

  7. Time-frequency analysis of the dynamics of different vorticity structures generated from a finite-length triangular prism

    Iungo, Giacomo Valerio; Lombardi, Edoardo

    2011-01-01

    Time–frequency analysis of the dynamics of different wake vorticity structures, generated from a triangular prism orientated with its apex edge against the incoming wind, is carried out. Time–frequency analysis of time-series obtained with hot-wire anemometry is performed through a procedure based on proper orthogonal decomposition and spectral components are extracted with a technique that provides an increased efficiency for fluid dynamic applications.

  8. Faint stellar spectral-type standards for objective-prism plates from the UK 1.2-m Schmidt

    Illustrations and descriptions are given for 10 stellar spectral types from A3 to M5 as they appear on photographs obtained with the objective prism of the UK Schmidt telescope. The corresponding slit spectra at 18-A resolution also are shown from the image photon-counting system of the 3.9-m Anglo-Australian telescope. The stars range between msub(B) = 14.8 and 18.8 with little or no reddening. (author)

  9. Experimental study on the confined 3D laminar flow past a square prism with a high blockage ratio

    Highlights: • Experimental study of the flow past a confined square section prism. • Flow regime is 3D and laminar. • Different regimes are identified depending on the Reynolds number. • Results could be used for practical engineering design purposes. -- Abstract: An experimental PIV study is presented that addresses the confined 3D laminar flow behaviour past a square prism. The Reynolds number (Re), based on prism cross-section height varies between 100 and 256. The channel aspect ratio is 1/1 and the blockage ratio is 1/2.5. This geometry is representative of a passive method to enhance mixing in otherwise highly ordered laminar channel flow. It is found that the lateral walls exert a strong effect on the flow behaviour with two main consequences: (a) the onset of vortex shedding is delayed to a Re in the vicinity of 170, as opposed to the unconfined case where the critical Re is reported to be between 50 and 60 and (b) transition from the steady closed recirculation bubble regime to the vortex shedding regime is not abrupt. In particular, there is a range of Re for which the closed recirculation bubble pulsates with increasing amplitude prior to the onset of the Karman street regime. The experimental results are supported by numerical computations, and the relation of the results with the practical design of engineering systems is also discussed

  10. Graphite oxide-mediated synthesis of porous CeO2 quadrangular prisms and their high-efficiency adsorptive performance

    Graphical abstract: - Highlights: • Porous CeO2 quadrangular prisms have been prepared via graphite oxide-mediated synthesis. • Dual-pore hierarchical systems are formed with the pore distributions around 4 nm and 30 nm. • Porous CeO2 exhibits a rapid adsorption to Rhodamine B with a removal efficiency of ∼99%. • Porous CeO2 retains the same performances in different pH solutions. - Abstract: We report a graphite oxide-mediated approach for synthesizing porous CeO2 through a facile hydrothermal process followed by thermal annealing in air. The phase structure, morphology, microstructure and porosity of the products have been revealed by a combination of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and N2 adsorption. The as-prepared CeO2 products show well-defined quadrangular prism morphology, and they are composed of interconnected nanoparticles with diameters around 30–100 nm. In particular, the dual-pore hierarchical systems are created in the CeO2 quadrangular prisms with the pore distributions around 4 nm and 30 nm. The dye sorption capacity of the porous CeO2 is investigated, which exhibits a rapid adsorption to rhodamine B with a high removal efficiency of ∼99%. Moreover, the CeO2 absorbent retains the same performances in different pH solutions

  11. Tests on a prototype of the Passive Fission Gas Monitor for failed detection (PRISM reactor)

    The Passive Diffusion Fission Gas Monitor PDFGM is mounted on the PRISM reactor head and extends into the cover gas Region where it determines the presence of radioactive fission gases (Kr, Xe, and so on) released from failed fuel pins. It contains a steel diffusion column that is closed at the upper end but opened to the cover gas at its lower end. The upper portion of the column is located in the field of view of a collimated gamma detector which is shielded from the remainder of the cover gas and of the sodium pool below. Heaters are provided to obtain a uniform axial temperature in the gas column and to minimize the potential for natural convection currents. In this way, the molecular diffusion can be established based on the fission gas concentration gradients along the column length. This is an advanced solution in comparison with current devices based on active components (pumps, filters, and so on). The experimental results on a prototype of PDFGM and their interpretation will be presented in this paper. (author)

  12. Electro-Optic Modulator Based on Organic Planar Waveguide Integrated with Prism Coupler

    Sarkisov, Sergey S.

    2002-01-01

    The objectives of the project, as they were formulated in the proposal, are the following: (1) Design and development of novel electro-optic modulator using single crystalline film of highly efficient electro-optic organic material integrated with prism coupler; (2) Experimental characterization of the figures-of-merit of the modulator. It is expected to perform with an extinction ratio of 10 dB at a driving signal of 5 V; (3) Conclusions on feasibility of the modulator as an element of data communication systems of future generations. The accomplishments of the project are the following: (1) The design of the electro-optic modulator based on a single crystalline film of organic material NPP has been explored; (2) The evaluation of the figures-of-merit of the electro-optic modulator has been performed; (3) Based on the results of characterization of the figures-of-merit, the conclusion was made that the modulator based on a thin film of NPP is feasible and has a great potential of being used in optic communication with a modulation bandwidth of up to 100 GHz and a driving voltage of the order of 3 to 5 V.

  13. Scattering depth correction of evanescent waves in inelastic neutron scattering using a neutron prism

    Grazing Incidence Neutron Spin Echo Spectroscopy (GINSES) has recently been applied to measure the dynamics of surfactant membranes close to a hydrophilic silicon wall. The scattering depth of the evanescent wave inside the microemulsion depends strongly on the angle of incidence and the wavelength. The inherently low scattering intensity of GINSES measurements, however, requires the integration over a rather broad wavelength band. In particular, at a pulsed source the instrument operates with a broad wavelength band covering all neutrons within one frame between two pulses. In order to yield viable counting statistics it is highly desirable to integrate data corresponding to significant fractions of the wavelength band. Therefore, in a normal reflectometry setup the penetration length would be smeared and blur the depth dependence of the experimental results. Here we describe a new method to strongly mitigate this effect and show its application in a GINSES experiment at the neutron spin echo instrument at the Spallation Neutron Source (SNS). A prism in front of the sample was introduced in order to adapt the angle of the incoming beam according to the wavelength by this optical component. As an example an experiment on a bicontinuous microemulsion using these neutron optics is presented.

  14. Multi-energy CT based on a prior rank, intensity and sparsity model (PRISM)

    In this article, we propose a compressive sensing (CS) approach for multi-energy computed tomography (CT). This approach utilizes prior knowledge on the rank of a spatial spectral matrix after certain transform, energy-dependent intensity (linear attenuation coefficient) characteristics, namely spectral properties, of structures and/or base materials, and image sparsity after a sparsifying transform. The spatial spectral matrix is formed with the row dimension in space and the column dimension in energy. Real images are presented as a mixture of a low-rank matrix and a sparse matrix, where the low-rank matrix corresponds to the background over energy under the aforementioned transform, while the sparse matrix stands for the distinct spectral features under the sparsifying transform. Also, the energy-dependent intensity information can be incorporated into the PRISM in terms of the spectral curves for base materials. In this case, we can transform the reconstruction of spectral images into the estimation of a material composition matrix, which is independent of energy. (orig.)

  15. Three-head positron coincidence detection (γ PET) by PRISM-IRIX gamma camera system

    The Shimadzu PRISM-IRIX is a three-headed variable-angle gamma camera system that also ensures the highest performances in single photon emission computed tomography (SPECT). It provides not only single photon imaging, but also positron coincidence imaging, by using two of the three heads. We have successfully improved the hardware and software of this system, so that the system fully utilizes all of the three heads in order to perform more reliable positron coincidence imaging. Also, we utilized the method of computer simulation to find out the head configuration that ensures the highest performances. Our investigations have shown that the triangular head configuration ensures the highest performances and stability of results in examinations of small organs where the rotation angle is set to 15 cm and that the C-mode head configuration gives the highest stability in examinations of larger organs where the rotation angle is set to 30 cm. We have further improved the electronic circuitry of the head to establish a system called AZTec (adaptive zone technology system). This system ensures even higher coincidence efficiency and higher performances in general. (author)

  16. Comet P/Halley 1910, 1986: An objective-prism study

    Carsenty, U.; Bus, E. S.; Wyckoff, S.; Lutz, B.

    1986-01-01

    V. M. Slipher of the Lowell Obs. collected a large amount of spectroscopic data during the 1910 apparition of Halley's comet. Three of his post perihelion objective-prism plates were selected, digitized, and subjected to modern digital data reduction procedures. Some of the important steps in the analysis where: (1) Density to intensity conversion for which was used 1910 slit spectra of Fe-arc lamp on similar plates (Sigma) and derived an average characteristic curve; (2) Flux calibration using the fact that during the period June 2 to 7 1910 P/Halley was very close (angular distance) to the bright star Alpha Sex (A0III, V-4.49), and the spectra of both star and comet were recorded on the same plates. The flux distribution of Alpha Sex was assumed to be similar to that of the standard star 58 Aql and derived a sensitivity curve for the system; (3) Atmospheric extinction using the standard curve for the Lowell Obs.; (4) Solar continuum subtraction using the standard solar spectrum binned to the spectral resolution. An example of a flux-calibrated spectrum of the coma (integrated over 87,000km) before the subtraction of solar continuum is presented.

  17. Rise time of inverted triangular prism intruder in vibrating granular bed: Experiments and model

    Nuraini, N.; Adriani, I. K.; Baladram, M. S.; Viridi, S.

    2012-05-01

    Experiment results and a qualitative model of the phenomenon called Brazil nut effect (BNE) with inverted triangular prism are reported in this work. The model is constructed by considering some forces (earth gravitational force, buoyant force, and fluid viscous force) and using Newton's second law of motion. The rise time of BNE T is defined as time needed for the intruder to be on granular surface with all of his parts (no part is still immersed in the granular bed). One side of the triangular base of the intruder l is varied from 1.5 to 5 cm with other two sides are kept in constant values (1 and 3 cm). It has been observed in experiment that l with value 3-4 cm gives the smaller rise time. Plot of T versus l has the form of concave up parabolic curve with minimum lies at l between 3-4 cm. This observation has been confirmed by the proposed model with the same order of magnitude and similar curve trend.

  18. Validation of "AW3D" Global Dsm Generated from Alos Prism

    Takaku, Junichi; Tadono, Takeo; Tsutsui, Ken; Ichikawa, Mayumi

    2016-06-01

    Panchromatic Remote-sensing Instrument for Stereo Mapping (PRISM), one of onboard sensors carried by Advanced Land Observing Satellite (ALOS), was designed to generate worldwide topographic data with its optical stereoscopic observation. It has an exclusive ability to perform a triplet stereo observation which views forward, nadir, and backward along the satellite track in 2.5 m ground resolution, and collected its derived images all over the world during the mission life of the satellite from 2006 through 2011. A new project, which generates global elevation datasets with the image archives, was started in 2014. The data is processed in unprecedented 5 m grid spacing utilizing the original triplet stereo images in 2.5 m resolution. As the number of processed data is growing steadily so that the global land areas are almost covered, a trend of global data qualities became apparent. This paper reports on up-to-date results of the validations for the accuracy of data products as well as the status of data coverage in global areas. The accuracies and error characteristics of datasets are analyzed by the comparison with existing global datasets such as Ice, Cloud, and land Elevation Satellite (ICESat) data, as well as ground control points (GCPs) and the reference Digital Elevation Model (DEM) derived from the airborne Light Detection and Ranging (LiDAR).

  19. Comparison of the Spectral Properties of Pansharpened Images Generated from AVNIR-2 and Prism Onboard Alos

    Matsuoka, M.

    2012-07-01

    A considerable number of methods for pansharpening remote-sensing images have been developed to generate higher spatial resolution multispectral images by the fusion of lower resolution multispectral images and higher resolution panchromatic images. Because pansharpening alters the spectral properties of multispectral images, method selection is one of the key factors influencing the accuracy of subsequent analyses such as land-cover classification or change detection. In this study, seven pixel-based pansharpening methods (additive wavelet intensity, additive wavelet principal component, generalized Laplacian pyramid with spectral distortion minimization, generalized intensity-hue-saturation (GIHS) transform, GIHS adaptive, Gram-Schmidt spectral sharpening, and block-based synthetic variable ratio) were compared using AVNIR-2 and PRISM onboard ALOS from the viewpoint of the preservation of spectral properties of AVNIR-2. A visual comparison was made between pansharpened images generated from spatially degraded AVNIR-2 and original images over urban, agricultural, and forest areas. The similarity of the images was evaluated in terms of the image contrast, the color distinction, and the brightness of the ground objects. In the quantitative assessment, three kinds of statistical indices, correlation coefficient, ERGAS, and Q index, were calculated by band and land-cover type. These scores were relatively superior in bands 2 and 3 compared with the other two bands, especially over urban and agricultural areas. Band 4 showed a strong dependency on the land-cover type. This was attributable to the differences in the observing spectral wavelengths of the sensors and local scene variances.

  20. Potential of a polygonal prism and lamina; Takakuchu men no potential

    Koyama, S.

    1996-05-01

    With the use of rectangular coordinates O-XYZ, the potential of a calculation point P is expressed in the form of a triple repeated integral of a density {sigma} at point Q in the mass. The potential at the density {sigma} assumed to be 1 is named the potential of a polygonal prism. Further, a double repeated integral with an integral concerning Z removed from the triple integral is named the potential of polygonal lamina. This potential can be expressed in a quadratic form (linear form) with 2nd order partial derivative (1st order partial derivative) as a coefficient. On the contrary, in order to extract the 1st/2nd order partial derivatives from this potential by partial differential, it requires partial differentiation with these partial derivatives considered to be a constant. The reason that they can be realized is attributable to the zero result of the linear form which has as the coefficient a 3rd order partial derivative concerning the variable of integration in a primitive function. If this relation is used, the integral calculation and description may be simplified. An explanation was given with examples enumerated so that these conditions might be understood.