WorldWideScience

Sample records for 3rd edition revision

  1. A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

    handbook contains solutions for the stress intensity factor and the limit load for a number of crack geometries of importance for applications. It also contains rules for defect characterization, recommendations for estimation of residual stresses, material data for nuclear applications and a safety evaluation system. To ensure conservatism, the procedure with the given solutions of the stress intensity factor and the limit load has been validated. Predictions of the procedure were compared with the actual outcome of full scale experiments reported in the literature. The first edition of the handbook was released in 1990 and the second in 1991. This third edition has been extensively revised. A new safety evaluation system has been introduced. The conservatism in the method for assessment of secondary stresses has been reduced. The solutions for the stress intensity factor and the limit load, the recommendations for estimation of residual stresses and the given material data for nuclear applications have been updated. A modern Windows based PC-program SACC has been developed which can perform the assessments described in this handbook including calculation of crack growth due to stress corrosion and fatigue. The program also has an option which enables assessment of cracks according to the 1995 edition of the ASME Boiler and Pressure Vessel Code, Section XI. Appendices A, C and H for assessment of cracks in ferritic pressure vessels, austenitic piping and ferritic piping, respectively

  2. A procedure for safety assessment of components with cracks - Handbook. 3rd revised edition

    Andersson, P.; Bergman, M.; Brickstad, B.; Dahlberg, L.; Nilsson, F.; Sattari-Far, I. [SAQ Kontroll AB, Stockholm (Sweden)

    1999-12-01

    given objectives, the handbook contains solutions for the stress intensity factor and the limit load for a number of crack geometries of importance for applications. It also contains rules for defect characterization, recommendations for estimation of residual stresses, material data for nuclear applications and a safety evaluation system. To ensure conservatism, the procedure with the given solutions of the stress intensity factor and the limit load has been validated. Predictions of the procedure were compared with the actual outcome of full scale experiments reported in the literature. The first edition of the handbook was released in 1990 and the second in 1991. This third edition has been extensively revised. A new safety evaluation system has been introduced. The conservatism in the method for assessment of secondary stresses has been reduced. The solutions for the stress intensity factor and the limit load, the recommendations for estimation of residual stresses and the given material data for nuclear applications have been updated. A modern Windows based PC-program SACC has been developed which can perform the assessments described in this handbook including calculation of crack growth due to stress corrosion and fatigue. The program also has an option which enables assessment of cracks according to the 1995 edition of the ASME Boiler and Pressure Vessel Code, Section XI. Appendices A, C and H for assessment of cracks in ferritic pressure vessels, austenitic piping and ferritic piping, respectively.

  3. Introducing ZBrush 3rd Edition

    Keller, Eric

    2012-01-01

    Learn ZBrush inside and out with this updated new edition Get totally comfortable sculpting in a digital environment with the latest edition of this bestselling beginner's guide to ZBrush. Fully updated for the newest version of the software, ZBrush 4R3, this book dispels any fears you might have about the difficulty of using ZBrush and soon has you creating realistic, cartoon, and organic models with flair. Learn all the essentials, as you complete fun tutorials on painting, meshes, organic scripting, hard surface sculpting, lighting, rendering, and more. Introduces you to ZBrush, the sculpt

  4. Veterinary Microbiology, 3rd Edition

    Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...

  5. Spacecraft Systems Engineering, 3rd Edition

    Fortescue, Peter; Stark, John; Swinerd, Graham

    2003-03-01

    Following on from the hugely successful previous editions, the third edition of Spacecraft Systems Engineering incorporates the most recent technological advances in spacecraft and satellite engineering. With emphasis on recent developments in space activities, this new edition has been completely revised. Every chapter has been updated and rewritten by an expert engineer in the field, with emphasis on the bus rather than the payload. Encompassing the fundamentals of spacecraft engineering, the book begins with front-end system-level issues, such as environment, mission analysis and system engineering, and progresses to a detailed examination of subsystem elements which represent the core of spacecraft design - mechanical, electrical, propulsion, thermal, control etc. This quantitative treatment is supplemented by an appreciation of the interactions between the elements, which deeply influence the process of spacecraft systems design. In particular the revised text includes * A new chapter on small satellites engineering and applications which has been contributed by two internationally-recognised experts, with insights into small satellite systems engineering. * Additions to the mission analysis chapter, treating issues of aero-manouevring, constellation design and small body missions. In summary, this is an outstanding textbook for aerospace engineering and design students, and offers essential reading for spacecraft engineers, designers and research scientists. The comprehensive approach provides an invaluable resource to spacecraft manufacturers and agencies across the world.

  6. Building java programs (3rd edition)

    Reges, Stuart

    2013-01-01

    Building Java Programs: A Back to Basics Approach, Third Edition, introduces novice programmers to basic constructs and common pitfalls by emphasizing the essentials of procedural programming, problem solving, and algorithmic reasoning. By using objects early to solve interesting problems and defining objects later in the course, Building Java Programs develops programming knowledge for a broad audience. NEW! This edition is available with MyProgrammingLab, an innovative online homework and assessment tool. Through the power of practice and immediate personalized feedback, MyProgrammingLab helps students fully grasp the logic, semantics, and syntax of programming. Note: If you are purchasing the standalone text or electronic version, MyProgrammingLab does not come automatically packaged with the text. To purchase MyProgrammingLab, please visit: myprogramminglab.com or you can purchase a package of the physical text + MyProgrammingLab by searching the Pearson Higher Education web site. MyProgrammi...

  7. Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. First Update. (3rd edition)

    The proposed Update is for Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition. Attached to the report is a list of methods included in the proposed update indicating whether the method is a new method, a partially revised method, or a totally revised method. Do not discard or replace any of the current pages in the SW-846 manual until the proposed update I package is promulgated. Until promulgation of the update package, the methods in the update package are not officially part of the SW-846 manual and thus do not carry the status of EPA-approved methods. In addition to the proposed Update, six finalized methods are included for immediate inclusion into the Third Edition of SW-846. Four methods, originally proposed October 1, 1984, will be finalized in a soon to be released rulemaking. They are, however, being submitted to subscribers for the first time in the update. These methods are 7211, 7381, 7461, and 7951. Two other methods were finalized in the 2nd Edition of SW-846. They were inadvertantly omitted from the 3rd Edition and are not being proposed as new. These methods are 7081 and 7761

  8. Radar principles for the nonspecialist, 3rd edition

    Toomay, John

    2004-01-01

    Radar Principles for the Non-specialist, Third Edition continues its popular tradition: to distill the very complex technology of radar into its fundamentals, tying them to the laws of nature on one end and to the most modern and complex systems on the other. It starts with electromagnetic propagation, describes a radar of the utmost simplicity, and derives the radar range equation from that simple radar. Once the range equation is available, the book attacks the meaning of each term in it, moving through antennas, detection and tracking, radar cross-section, waveforms andsignal proces

  9. Standard of Nuclear Medicine Protocols. The 3rd revision, 1994

    NONE

    1994-09-01

    This document is designed to provide `Standard of Nuclear Medicine Protocols` revised in 1994. The present revision is aimed at providing new imaging agents (e.g, Tc-99m-HMPAO, Tc-99m-ECD, Tc-99m-technegas, Tc-99m MIBI, Tc-99m-tetrofosmin, I-123-BMIPP, and I-123-MIBG) and at introducing new application of conventional imaging agents. The descriptions are given under two sections: (I) standardization of imaging and (II) protocols for imaging of various organs. Section I covers static imaging, dynamic imaging, radioisotope angiography, SPECT, and collimators. In Section II, various imaging procedures are described as follows: (1) brain imaging, (2) brain perfusion imaging, (3) cistern imaging, (4) thyroid imaging, (5) imaging for metastatic foci from thyroid carcinoma, (6) parathyroid imaging, (7) lung perfusion imaging, (8) lung inhalation imaging, (9) lung ventilation imaging, (10) myocardial imaging, (11) myocardial metabolism imaging, (12) myocardial sympathetic functional imaging, (13) imaging for acute myocardial infarction, (14) blood pool imaging of the cardiac aorta, (15) RI venography, (16) hepato-splenic imaging, (17) hepato-biliary imaging, (18) imaging for the hepatic receptor, (19) hepatic RI angiography, (20) measurement of the portal-systemic shunt, (21) splenic imaging, (22) renal imaging, (23) vesicoureteral reflux imaging, (24) adrenal cortex imaging, (25) adrenal medulla imaging, (26) bone imaging, (27) bone joint imaging, (28) bone marrow imaging, (29) tumor imaging, (30) inflammatory imaging, (31) indium-labeled blood platelet imaging, (32) salivary imaging, (33) imaging of the Meckel`s diverticulum and ectopic gastric mucosa, (34) lymph node imaging, (35) lymphatic imaging, (36) imaging of the gastrointestinal hemorrhage, (37) testiclar imaging, (38) abdominal imaging, and (39) gastrointestinal movement imaging. (N.K.).

  10. Teaching Organic Farming and Gardening: Resources for Instructors, 3rd Edition. Introduction

    2015-01-01

    Drawing on nearly 50 years of teaching organic farming and gardening, the staff of the University of California, Santa Cruz Farm & Garden Apprenticeship and invited authors have developed an updated and expanded resource for instructors based on many of the skills and concepts taught in UCSC’s annual Apprenticeship in Ecological Horticulture program. Teaching Organic Farming & Gardening: Resources for Instructors, 3rd Edition addresses practical aspects of organic farming and gardening, appli...

  11. Revising and editing for translators

    Mossop, Brian

    2014-01-01

    Revising and Editing for Translators provides guidance and learning materials for translation students learning to edit texts written by others, and professional translators wishing to improve their self-revision ability or learning to revise the work of others. Editing is understood as making corrections and improvements to texts, with particular attention to tailoring them to the given readership. Revising is this same task applied to draft translations. The linguistic work of editors and revisers is related to the professional situations in which they work. Mossop offers in-depth coverage of a wide range of topics, including copyediting, style editing, structural editing, checking for consistency, revising procedures and principles, and translation quality assessment. This third edition provides extended coverage of computer aids for revisers, and of the different degrees of revision suited to different texts. The inclusion of suggested activities and exercises, numerous real-world examples, a proposed gra...

  12. Airfield construction (3rd revised and enlarged edition)

    Goretskii, Leonid I.; Boguslavskii, Adol'f. M.; Serebrenikov, Vadim A.; Barzdo, V. I.; Leshchitskaia, T. P.; Polosin-Nikitin, S. M.

    The principal engineering aspects of airfield construction are discussed. In particular, attention is given to the fundamental principles and organizational aspects of airfield construction; excavation work and airfield layout; construction of drainage systems; foundations and pavements; and quality control and safety engineering. The discussion also covers the operation of various support plants, including concrete production and mixing, production of asphalt-concrete mixtures and organic binders, production of structural steel and reinforced concrete components, and operation of stone quarries and gravel pits.

  13. Essential surgery: key messages from Disease Control Priorities, 3rd edition.

    Mock, Charles N; Donkor, Peter; Gawande, Atul; Jamison, Dean T; Kruk, Margaret E; Debas, Haile T

    2015-05-30

    The World Bank will publish the nine volumes of Disease Control Priorities, 3rd edition, in 2015-16. Volume 1--Essential Surgery--identifies 44 surgical procedures as essential on the basis that they address substantial needs, are cost effective, and are feasible to implement. This report summarises and critically assesses the volume's five key findings. First, provision of essential surgical procedures would avert about 1·5 million deaths a year, or 6-7% of all avertable deaths in low-income and middle-income countries. Second, essential surgical procedures rank among the most cost effective of all health interventions. The surgical platform of the first-level hospital delivers 28 of the 44 essential procedures, making investment in this platform also highly cost effective. Third, measures to expand access to surgery, such as task sharing, have been shown to be safe and effective while countries make long-term investments in building surgical and anaesthesia workforces. Because emergency procedures constitute 23 of the 28 procedures provided at first-level hospitals, expansion of access requires that such facilities be widely geographically diffused. Fourth, substantial disparities remain in the safety of surgical care, driven by high perioperative mortality rates including anaesthesia-related deaths in low-income and middle-income countries. Feasible measures, such as WHO's Surgical Safety Checklist, have led to improvements in safety and quality. Fifth, the large burden of surgical disorders, cost-effectiveness of essential surgery, and strong public demand for surgical services suggest that universal coverage of essential surgery should be financed early on the path to universal health coverage. We point to estimates that full coverage of the component of universal coverage of essential surgery applicable to first-level hospitals would require just over US$3 billion annually of additional spending and yield a benefit-cost ratio of more than 10:1. It would

  14. A comparing overview on ECAC Doc.29 3rd Edition and the new German AzB

    Isermann, Ullrich

    2010-01-01

    The European Environmental Noise Directive END requires harmonized calculation methods for the major environmental noise sources. Currently two potential candidates are discussed for the modeling of aircraft noise: the 3rd edition of ECAC Doc.29 was published in 2005 describing a recommended method for the calculation of aircraft noise around civil airports. The German AzB model published in 2008 was developed as a tool for the enforcement of the new German Act for Protection against Aircraf...

  15. A global drought climatology for the 3rd edition of the World Atlas of Desertification (WAD)

    Spinoni, Jonathan; Carrao, Hugo; Naumann, Gustavo; Antofie, Tiberiu; Barbosa, Paulo; Vogt, Jürgen

    2013-04-01

    A new version of the World Atlas of Desertification (WAD) is being compiled in the framework of cooperation between the Joint Research Centre (JRC) of the European Commission and the United Nations Environment Programme (UNEP). This initiative aims at mapping the global land degradation and desertification, as well as introducing the reader with complex interactions of geo-physical, socio-economic, and political aspects that affect the environmental sustainability. Recurrent extreme events resulting from climate change, such as more severe droughts, combined with non-adapted land use practices can affect the resilience of ecosystems tipping them into a less productive state. Thus, to describe the effects of climatological hazards on land degradation and desertification processes, we computed a World drought climatology that will be part of the 3rd edition of the WAD and will replace and update to 2010 the results presented in the 2nd edition in 1997. This paper presents the methodology used to compute three parameters included in the WAD drought climatology, i.e. drought frequency, intensity and duration, and discusses their spatio-temporal patterns both at global and continental scales. Because drought is mainly driven and triggered by a rainfall deficit, we chose the Standardized Precipitation Index (SPI) as the drought indicator to estimate our climatological parameters. The SPI is a statistical precipitation-based drought indicator widely used in drought-related studies. We calculated the SPI on three different accumulation periods: 3 months (SPI-3), 6 months (SPI-6), and 12 months (SPI-12), in order to take into account meteorological, agricultural, and hydrological drought-related features. Each quantity has been calculated on a monthly basis using the baseline period between January 1951 and December 2010. As data input, we used the Full Data Reanalysis Version 6.0 (0.5˚x0.5˚) of gridded monthly precipitation provided by the Global Precipitation

  16. Specifications and Construction Methods for Asphalt Concrete and Other Plant-Mix Types, 3rd Edition.

    Asphalt Inst., College Park, MD.

    The purpose of this publication is to assist engineers in the analysis, design and control of paving projects that use asphalt concrete and other asphalt plant-mixes. The scope of this new third edition has been enlarged, and changes necessitated by advances in asphalt technology have been incorporated. Chapters I and II and Appendices A and B…

  17. Medical writing, revising and editing

    Pilegaard, Morten

    2006-01-01

    The globalization of science makes medical writing, editing and revision a rapidly growing field of linguistic study and practice. Medical science texts are written according to uniform, general guidelines and medical genres have become highly conventionalized in terms of structure and linguistic...

  18. ASSET guidelines. Revised 1991 Edition

    The present publication is an updated version of the IAEA Assessment of Safety Significant Events Team (ASSET) Guidelines, IAEA-TECDOC-573, published in 1990. Sections 5 and 6 include revised definitions and investigation guidelines for identification of both direct and root causes. These revisions were recommended by a Consultants Meeting held in Vienna on 3-7 December 1990. This guidance is not intended to infringe an expert's prerogative to investigate additional items. Its main purpose is to provide a basic structure and ensure consistency in the assessments. Use of the ASSET guidelines should also facilitate comparison between the observations made in different nuclear power plants and harmonize the reporting of generic ASSET results. The guidelines should always be used with a critical attitude and a view to possible improvements

  19. 《牛津高阶英汉双解词典》第3版与第4版编纂的比较研究%The Differences between the 3rd Edition and the 4th Edition of Oxford Advanced Learner's English-Chinese Dictionary in Compilation

    秦勇

    2003-01-01

    This paper is to analyze the differences between the 3rd edition and 4th edition of Oxford Advanced Learner's English- Chinese Dictionary (hereafter referred to as ALECD3 and ALECD4). By making comparison between the two dictionaries in the learner's and compiler's perspectives, it highlights the priority of the 4th edition in content and compilation. Following a brief introduction in Part 1,Part 2 examines the innovations the 3rd edition has made in verb - pattern scheme, compounds, entries,examples,adjectives and appendices from the learner's perspective. Part3 holds a theoretical discussion of prescription and description in the 4th edition.

  20. Compilation of comments concerning the 3rd draft revision of the IAEA regulations for safety transport of radioactive materials

    The report contains comments made by Member States and International Organizations to the third draft revision of the International Energy Agency's regulations for the safe transport of radioactive materials. The comments are compiled in logical groups referring to various aspects of the regulations

  1. Metabolic engineering of E.coli for the production of a precursor to artemisinin, an anti-malarial drug [Chapter 25 in Manual of Industrial Microbiology and Biotechnology, 3rd edition

    Petzold, Christopher; Keasling, Jay

    2011-07-18

    This document is Chapter 25 in the Manual of Industrial Microbiology and Biotechnology, 3rd edition. Topics covered include: Incorporation of Amorpha-4,11-Diene Biosynthetic Pathway into E. coli; Amorpha-4,11-Diene Pathway Optimization; "-Omics" Analyses for Increased Amorpha-4,11-Diene Production; Biosynthetic Oxidation of Amorpha-4,11-Diene.

  2. Long Distance Revisions in Drafting and Post-editing

    Carl, Michael; Kay, Martin; Jensen, Kristian T. H.

    2010-01-01

    This paper investigates properties of translation processes, as observed in the translation behaviour of student and professional translators. The translation process can be divided into a gisting, drafting and post-editing phase. We find that student translators have longer gisting phases whereas professional translators have longer post-editing phases. Long-distance revisions, which would typically be expected during post-editing, occur to the same extent during drafting a...

  3. Designing Successful Transitions: A Guide for Orienting Students to College. 3rd Edition. The First-Year Experience Monograph Series No. 13

    Ward-Roof, Jeanine A., Ed.

    2010-01-01

    The 2010 edition of this monograph addresses many topics (e.g., administration of orientation programs, family involvement, student characteristics and needs, assessment, and orientation for specific student populations and institutional types) that were included in previous editions but approaches them with new information, updated data, and…

  4. A History of American Archaeology, by Gordon R. Willey and Jeremy A. Sabloff, 3rd edition. W. H. Freeman and Co., New York, 1993

    Andrew L. Christenson

    1995-11-01

    Full Text Available Those who were waiting to see dramatic changes in Willey and Sabloff will be disappointed. The first five chapters are virtually identical to the previous edition, except that Indians have been transformed into Native Americans and the footnotes have been expanded somewhat to incorporate new publications. I have little to say about this section, which comprises two thirds of the book, and which does a reasonable job of covering the major archaeologists and themes of the first 100+ years of American archaeology. There are always specific points that one can take issue with but the authors make a real effort to cover American archaeology prior to 1960 in its broadest sense.

  5. Probability and Statistics The Science of Uncertainty (Revised Edition)

    Tabak, John

    2011-01-01

    Probability and Statistics, Revised Edition deals with the history of probability, describing the modern concept of randomness and examining "pre-probabilistic" ideas of what most people today would characterize as randomness. This revised book documents some historically important early uses of probability to illustrate some very important probabilistic questions. It goes on to explore statistics and the generations of mathematicians and non-mathematicians who began to address problems in statistical analysis, including the statistical structure of data sets as well as the theory of

  6. 3rd annual biomass energy systems conference

    1979-10-01

    The main objectives of the 3rd Annual Biomass Energy Systems Conference were (1) to review the latest research findings in the clean fuels from biomass field, (2) to summarize the present engineering and economic status of Biomass Energy Systems, (3) to encourage interaction and information exchange among people working or interested in the field, and (4) to identify and discuss existing problems relating to ongoing research and explore opportunities for future research. Abstracts for each paper presented were edited separately. (DC)

  7. Algebra Sets, Symbols, and the Language of Thought (Revised Edition)

    Tabak, John

    2011-01-01

    Algebra, Revised Edition describes the history of both strands of algebraic thought. This updated resource describes some of the earliest progress in algebra as well as some of the mathematicians in Mesopotamia, Egypt, China, and Greece who contributed to this early period. It goes on to explore the many breakthroughs in algebraic techniques as well as how letters were used to represent numbers. New material has been added to the chapter on "modern" algebra, a type of mathematical research that continues to occupy the attention of many mathematicians today.

  8. Geometry The Language of Space and Form (Revised Edition)

    Tabak, John

    2011-01-01

    Geometry, Revised Edition describes geometry in antiquity. Beginning with a brief description of some of the geometry that preceded the geometry of the Greeks, it takes up the story of geometry during the European Renaissance as well as the significant mathematical progress in other areas of the world. It also discusses the analytic geometry of Ren Descartes and Pierre Fermat, the alternative coordinate systems invented by Isaac Newton, and the solid geometry of Leonhard Euler. Also included is an overview of the geometry of one of the most successful mathematicians of the 19th century, Bernha

  9. 3rd IDPASC School

    Lectures on particle physics, astrophysics and cosmology

    2015-01-01

    This volume gathers the content of the courses held at the Third IDPASC School, which took place in San Martiño Pinario, Hospederia and Seminario Maior, in the city of Santiago de Compostela, Galiza, Spain, from January 21st to February 2nd, 2013. This school is the annual joint program of the International Doctorate Network in Particle Physics, Astrophysics, and Cosmology (IDPASC).   The purpose of the school series is to present doctoral students from different universities and laboratories in Europe and beyond with a broad range of the latest results and current state of the art in the fields of Particle Physics, Astrophysics, and Cosmology, and to further introduce them to both the questions now posed by the potentials of physics and to challenges connected with current and future experiments – in particular, with the newly available energy ranges.   Following these guidelines, the content of this third edition of the IDPASC School was jointly planned by the Academic Council and by the network’s In...

  10. Alaska Highway bibliography, 3rd edition

    Prange, Laurie

    Since the early 20th century various schemes were considered for the construction of roads, trails or railways 71 to link the Yukon, northern British Columbia and Alaska to the “outside.” These schemes were motivated by economic interests, including mining, lumber and tourism concerns. During the....... The impacts included an increased awareness of the world outside of the Yukon, imported ideas and technology, improved health care, highway transportation, telecommunications, and the development of more mining and tourist-related industries....

  11. Costs, affordability, and feasibility of an essential package of cancer control interventions in low-income and middle-income countries: key messages from Disease Control Priorities, 3rd edition.

    Gelband, Hellen; Sankaranarayanan, Rengaswamy; Gauvreau, Cindy L; Horton, Susan; Anderson, Benjamin O; Bray, Freddie; Cleary, James; Dare, Anna J; Denny, Lynette; Gospodarowicz, Mary K; Gupta, Sumit; Howard, Scott C; Jaffray, David A; Knaul, Felicia; Levin, Carol; Rabeneck, Linda; Rajaraman, Preetha; Sullivan, Terrence; Trimble, Edward L; Jha, Prabhat

    2016-05-21

    Investments in cancer control--prevention, detection, diagnosis, surgery, other treatment, and palliative care--are increasingly needed in low-income and particularly in middle-income countries, where most of the world's cancer deaths occur without treatment or palliation. To help countries expand locally appropriate services, Cancer (the third volume of nine in Disease Control Priorities, 3rd edition) developed an essential package of potentially cost-effective measures for countries to consider and adapt. Interventions included in the package are: prevention of tobacco-related cancer and virus-related liver and cervical cancers; diagnosis and treatment of early breast cancer, cervical cancer, and selected childhood cancers; and widespread availability of palliative care, including opioids. These interventions would cost an additional US$20 billion per year worldwide, constituting 3% of total public spending on health in low-income and middle-income countries. With implementation of an appropriately tailored package, most countries could substantially reduce suffering and premature death from cancer before 2030, with even greater improvements in later decades. PMID:26578033

  12. Safe Handling of Radioisotopes. First Edition with Revised Appendix I

    Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it was considered an urgent task to provide users of radioisotopes with a manual of practice for the safe handling of these substances. The first edition of such a manual was published in 1958 and represented the first of the 'Safety Series', a series of manuals and codes on health and safety published by the Agency. It was prepared after careful consideration of existing national and international codes of radiation safety by a group of international experts and in consultation with other international bodies. This edition presents the first revision. It incorporates in the Appendices the latest recommendations of the International Commission on Radiological Protection and extracts from the report of the Committee II of the I.C.R.P. on permissible dose for internal radiation. The Health Physics and Medical Addenda to this Manual, published as No. 2 and No. 3 in the Safety Series in 1960, give more complete advice to the user on specialized topics.

  13. Delta's Key to the TOEFL iBT[R]: Advanced Skill Practice. Revised Edition

    Gallagher, Nancy

    2012-01-01

    Delta's Key to the TOEFL iBT: Advanced Skill Practice is a revised and updated edition of Delta's Key to the Next Generation TOEFL Test. Since the introduction of the TOEFL iBT in 2005, there have been significant changes to some of the test questions, particularly the integrated writing and integrated speaking tasks. The new 2011 edition of…

  14. What Video Games Have to Teach Us about Learning and Literacy. Second Edition: Revised and Updated Edition

    Gee, James Paul

    2007-01-01

    The author begins his classic book with "I want to talk about video games--yes, even violent video games--and say some positive things about them." With this simple but explosive statement, one of America's most well-respected educators looks seriously at the good that can come from playing video games. In this revised edition, new games like…

  15. Coal mine ground control. 3rd ed.

    Peng, S.S.

    2008-09-15

    The third edition not only completely revises and updates the original subject areas, but also is broadened to include a number of new topics such as high horizontal stresses, computer modeling, and highwall stability. The subject areas covered in this book define the current field of coal mine ground control, except for the recently emerging topic of mine seals and some conventional subjects such as coal/rock cutting and impoundment dams. It contains 1,134 references from all published sources, and archived since 1876.

  16. Bully Blocking: Six Secrets to Help Children Deal with Teasing and Bullying. Revised Edition

    Field, Evelyn M.

    2007-01-01

    This confidence-boosting book aims to help children overcome the damaging effects of teasing and bullying, and to develop practical skills and attitudes to improve their self-esteem and quality of life. This revised edition of "Bully Blocking" (originally published under the title "Bully Busting") is based on Evelyn Field's "Secrets of Relating,"…

  17. For Reading Out Loud! A Guide to Sharing Books with Children. Revised and Expanded Edition.

    Kimmel, Margaret Mary; Segel, Elizabeth

    This guide contains detailed and thoughtful descriptions of 175 recommended books that teachers and parents can read to children--this revised and expanded edition carries a new section on reading aloud from infancy to kindergarten. Following a foreword by "Mister Rogers," chapters in the guide are entitled: (1) Why Bother? The Case for Reading…

  18. Easy Steps to STAIRS. 2nd Revised Edition.

    National Library of Australia, Canberra.

    This manual for computer searchers describes the software package--IBM's STAIRS (Storage And Information Retrieval System)--used for searching databases in AUSINET (AUStralian Information NETwork). Whereas the first edition explained STAIRS in the context of the National Library's Online ERIC Project and the ERIC data base, this second edition…

  19. Mathematics and the Laws of Nature Developing the Language of Science (Revised Edition)

    Tabak, John

    2011-01-01

    Mathematics and the Laws of Nature, Revised Edition describes the evolution of the idea that nature can be described in the language of mathematics. Colorful chapters explore the earliest attempts to apply deductive methods to the study of the natural world. This revised resource goes on to examine the development of classical conservation laws, including the conservation of momentum, the conservation of mass, and the conservation of energy. Chapters have been updated and revised to reflect recent information, including the mathematical pioneers who introduced new ideas about what it meant to

  20. Standard and reference materials for marine science, revised edition, 1993

    IOC for UNESCO

    1993-01-01

    This is the third edition of the catalog of reference materials suited for use in marine science, originally compiled in 1986 for NOAA, IOC and UNEP. The catalog lists close to 2,000 reference materials from sixteen producers and contains information about their proper use, sources, availability, and analyte concentrations. Indices are included for elements, isotopes, and organic compounds, as are cross references to CAS registry numbers, alternate names, and chemical structures of selected o...

  1. Florida's Manatee. An Educator's Guide. Third Edition Revised.

    Fritz-Quincy, Debbie

    This revised and updated guide provides resources for teaching about the Florida manatee, a nearly hairless, thick-skinned marine mammal without hindlimbs and with paddle-like forelimbs. The manatee (an endangered species) is sometimes called a sea cow. The guide includes: (1) a vocabulary list; (2) a list of suggested readings; (3) an annotated…

  2. Lifelong Adaptability: A Cultural Literacy Perspective (Revised Edition)

    Moyer, John Thayer

    2011-01-01

    This revised 1997 ex post facto study attempted to identify a lifelong adaptability curriculum from a cultural literacy perspective. It investigated students' lifelong adaptability ratings of 15 general school subjects as predicted by family structure, parental age, parental educational level, student cultural literacy, and student gender;…

  3. A Glossary of Literature and Composition. Revised Edition.

    Lazarus, Arnold; Smith, H. Wendell

    A valuable adjunct reference tool for teachers and students of English, this revised and enlarged glossary defines and discusses nearly 800 concepts and terms used in literature and literary criticism, rhetorical theory, and composition. The authors explain many key concepts in considerable detail, placing terms in historical context, offering…

  4. Reinventing Management Smarter Choices for Getting Work Done, Revised and Updated Edition

    Birkinshaw, Julian

    2012-01-01

    The economic crisis was not just caused by a failure of regulation or economic policy; it was a story of the failure of management in a fundamental sense-a deeply flawed approach to management that encouraged bankers to pursue opportunities without regard for their long-term consequences, and to put their own interests ahead of those of their employers and their shareholders. The revised edition of this best-selling book shows convincingly that many of today's major economic problems in the west can be traced to a failure of management. In this updated edition the author draws our attention to

  5. Exercises in Statistics. 3rd Semester

    Exercises in Statistics includes exercises for the tutorials forming a part of the course in statistics at the 3rd semester bachelors programme at the Aarhus School of Business.......Exercises in Statistics includes exercises for the tutorials forming a part of the course in statistics at the 3rd semester bachelors programme at the Aarhus School of Business....

  6. Lecture Notes in Statistics. 3rd Semester

    The lecture note is prepared to meet the requirements of the curriculum for the 3rd smester course in statistics at the Aarhus School of Business.......The lecture note is prepared to meet the requirements of the curriculum for the 3rd smester course in statistics at the Aarhus School of Business....

  7. The principles of radio engineering and antennas. II Antennas (2nd revised and enlarged edition)

    Belotserkovskii, G. B.

    This book represents the second part of a textbook for technical schools. The characteristics and parameters of antennas are considered along with transmission lines, the theory of single dipoles and radiator systems, and the technological realization of elements and units of the antenna-feeder system, taking into account filters and multiport networks for microwave communications applications, and ferrite circulators and isolators. The first edition of this textbook was published in 1969. For the current edition, the material in the first edition has been revised, and new material has been introduced. Much attention is given to microwave antennas, including, in particular, arrays with electrical scanning characteristics. Other topics discussed are related to the general principles of antennas, the matching of the impedance of transmission lines, the elements of transmission lines, aperture-type antennas for microwaves, and the functional characteristics of antennas for ultrashort waves.

  8. 3rd International Conference on Ecosystem Assessment Management

    Ma, Sheng-Quan; Cao, Hu-hua; Ecosystem Assessment and Fuzzy Systems Management

    2014-01-01

    “Ecosystem Assessment and Fuzzy Systems Management” is the edited outcome of the 3rd International Conference on Ecosystem Assessment Management (ICEAM) and the Workshop on the Construction of an Early Warning Platform for Eco-tourism (WCEWPE) in Hainan on May 5-12, 2013, Haikou, China. The 3rd ICEAM and the WCEWPE, built on the success of previous conferences, are major Symposiums for scientists, engineers and logistic management researchers presenting their the latest achievements, developments and applications in all areas of Ecosystem Assessment Management, Early Warning Platform for Eco-tourism and fuzziology. It aims to strengthen relations between industry research laboratories and universities, and to create a primary symposium for world scientists. The book, containing 47 papers, is divided into five parts: “Ecosystem Assessment, Management and Information”; “Intelligent Algorithm, Fuzzy Optimization and Engineering Application”; “Spatial Data Analysis and Intelligent Information Proces...

  9. Lecture Notes in Statistics. 3rd Semester

    The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models.......The lecture note is prepared to meet the requirements for the 3rd semester course in statistics at the Aarhus School of Business. It focuses on multiple regression models, analysis of variance, and log-linear models....

  10. 3rd Workshop on "Combinations of Intelligent Methods and Applications"

    Palade, Vasile

    2013-01-01

    The combination of different intelligent methods is a very active research area in Artificial Intelligence (AI). The aim is to create integrated or hybrid methods that benefit from each of their components.  The 3rd Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2012) was intended to become a forum for exchanging experience and ideas among researchers and practitioners who are dealing with combining intelligent methods either based on first principles or in the context of specific applications. CIMA 2012 was held in conjunction with the 22nd European Conference on Artificial Intelligence (ECAI 2012).This volume includes revised versions of the papers presented at CIMA 2012.  .

  11. Guide Catalogues on Adjusting Industrial Structure 2011 Edition Revised and Published by the State

    2011-01-01

    On March 27,National Development and Reform Commission published its No.9 order Guide Catalogues on Adjusting Industrial Structure (2011 Edition),to be implemented from June 1,2011.At the same time the Guide Catalogues on Adjusting Industrial Structure (2005 Edition) shall be abolished. Guide Catalogues on Adjusting Industrial Structure is an important reference for government to guide the investment direction,administrate investment projects,draw up and carry out fiscal and tax,financial,land,import and export policies.The revision of 2005 Edition keeps to the following principles:the first is to insist on the combination of market adjustment with government guidance;the second is to insist on the combination of traditional industrial upgrade with developing strategic emerging industries;the third is to insist on the combination of structural adjustment with coordinated development;and the fourth is to insist on the combination of controlling the total volume with optimizing the stock.The new catalogues aim to reflect the direction and content of structural adjustment and industrial upgrade.It lays much stress on the development and independent innovation of strategic emerging industries,and the limitation and guidance for industries with excess production capacity.The new edition keeps to the classification of 2005 Edition,and it's still divided into three categories including encouraged,limited and eliminated ones.Categories that do not belong to the above three categories,but still meet the requirements of national laws,regulations and policies arc defined as allowed category,which will not be included in the Catalogues.

  12. Introduction to high energy physics, 3rd edition

    This book presents the important aspects of the field of high-energy physics, or particle physics, at an elementary level. The first chapter presents basic introductory ideas, the historical development, and a brief overview of the subject; the second and third chapters deal with experimental methods, conservation laws, and invariance principles. The following chapters deal in turn with the main features of the interactions between hadrons; the description of the hadrons in terms of quark constituents, and discussion of the basic interactions-electromagnetic, weak and strong-between the lepton and quark constituents. The final chapter discusses unification of the various interactions

  13. Legal Concepts in Sport: A Primer. 3rd Edition

    Carpenter, Linda Jean

    2008-01-01

    When most people think of legal issues in sport, they think about negligence. However, most professionals will face a much broader range of issues. For instance, topics such as sexual harassment, corporal punishment, drug testing, transportation, and hazing are all of special importance today. Also anti-discrimination laws and the concepts…

  14. Landman's encyclopedia. 3rd edition

    Hankinson, R.L.; Hankinson, R.L. Jr.

    1987-01-01

    This book discusses the guidelines for petroleum landmen and includes the new documents: partial assignment of oil, gas, and mineral lease, net profits agreement, net profit interest, ratification agreements, an additional farmout agreement form, gas balancing agreement, shut-in gas royalty, oil, gas, and mineral lease form (Exxon lease), extension agreement, Pugh clause, assignment form of lease and equipment, losses addendum for operating agreements, boundary agreement, change of lease description forms. Also included is a cross-listing of the document numbers used in this book with those used in the popular software database.

  15. Entrepreneurship and Small Business : 3rd Asia-Pacific Edition

    Schaper, Michael; Volery, Thierry; Weber, Paull; Lewis, Kate

    2010-01-01

    (See also PDF) PART 1 The nature of small business and entrepreneurship. CHAPTER 1 Entrepreneurship: definition and evolution. CHAPTER 2 The personality of entrepreneurs. CHAPTER 3 Creativity, innovation and entrepreneurship. CHAPTER 4 Small business: definitions and characteristics. PART 2 Getting into business. CHAPTER 5 Options for going into business. CHAPTER 6 Market research and strategy formulation. CHAPTER 7 Preparing a business plan. CHAPTER 7 ...

  16. Growth and mineral nutrition of field crops 3rd Edition

    Green revolution technology of last century led to increased production. The green revolution, however, did not link farming system sustainability to food system sustainability as a whole. In recent years the rate of food-grain production has been lower than the rate of population growth. This will ...

  17. Diagnosis and Fault-tolerant Control, 3rd Edition

    Blanke, Mogens; Kinnaert, Michel; Lunze, Jan; Staroswiecki, Marcel

    The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process...

  18. 3rd Semester and Master's Thesis Ideas

    Clausen, Johan

    The following pages contain a list of project ideas proposed by the scientific staff at the department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalouge may form the basis for long and short candidate projects as well as regular 3rd s...

  19. The 3rd power unit roofing decontamination

    The most features of the 3rd power unit (PU) roofing decontamination are described: 1) the most active materials were thrown into the 4th PU ruins before the Ukrytie construction completion; 2) the decontamination was fulfilled using remote-controlled mechanisms and manual devices (the main part). 6 figs.; 1 tab

  20. The Possibility of 3rd Harmonic Filtration

    Sýkora, T.; Brettschneider, Z.; Švec, J.; Tlustý, J.; Valouch, Viktor

    Košice : Technical University of Košice, 2007, s. 492-498. ISBN 978-80-8073-844-0. [International Scientific Symposium ELEKTROENERGETIKA 2007 /4./. Stará Lesná, High Tatras (SK), 19.09.2007-21.09.2007] Institutional research plan: CEZ:AV0Z20570509 Keywords : 3rd harmonic * passive transformer filter Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

  1. PREFACE: 3rd International Conference of Mechanical Engineering Research (ICMER 2015)

    Mamat, Riazalman; Rahman, Mustafizur; Mohd. Zuki Nik Mohamed, Nik; Che Ghani, Saiful Anwar; Harun, Wan Sharuzi Wan

    2015-12-01

    The 3rd ICMER2015 is the continuity of the NCMER2010. The year 2010 represents a significant milestone in the history for Faculty of Mechanical Engineering, Universiti Malaysia Pahang (UMP) Malaysia with the organization of the first and second national level conferences (1st and 2nd NCMER) at UMP on May 26-27 and Dec 3-4 2010. The Faculty then changed the name from National Conference on Mechanical Engineering Research (NCMER) to International Conference on Mechanical Engineering Research (ICMER) in 2011 and this year, 2015 is our 3rd ICMER. These proceedings contain the selected scientific manuscripts submitted to the conference. It is with great pleasure to welcome you to the "International Conference on Mechanical Engineering Research (ICMER2015)" that is held at Zenith Hotel, Kuantan, Malaysia. The call for papers attracted submissions of over two hundred abstracts from twelve different countries including Japan, Iran, China, Kuwait, Indonesia, Norway, Philippines, Morocco, Germany, UAE and more. The scientific papers published in these proceedings have been revised and approved by the technical committee of the 3rd ICMER2015. All of the papers exhibit clear, concise, and precise expositions that appeal to a broad international readership interested in mechanical engineering, combustion, metallurgy, materials science as well as in manufacturing and biomechanics. The reports present original ideas or results of general significance supported by clear reasoning and compelling evidence, and employ methods, theories and practices relevant to the research. The authors clearly state the questions and the significance of their research to theory and practice, describe how the research contributes to new knowledge, and provide tables and figures that meaningfully add to the narrative. In this edition of ICMER representatives attending are from academia, industry, governmental and private sectors. The plenary and invited speakers will present, discuss, promote and

  2. 3rd International Conference on Robot Intelligence Technology and Applications

    Yang, Weimin; Jo, Jun; Sincak, Peter; Myung, Hyun

    2015-01-01

    This book covers all aspects of robot intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving researchers and practitioners with a timely dissemination of the recent progress on robot intelligence technology and its applications, based on a collection of papers presented at the 3rd International Conference on Robot Intelligence Technology and Applications (RiTA), held in Beijing, China, November 6 - 8, 2014. For better readability, this edition has the total 74 papers group...

  3. 3rd MeTrApp Conference

    Lovasz, Erwin-Christian; Hüsing, Mathias

    2015-01-01

    This volume deals with topics such as mechanism and machine design, biomechanics and medical engineering, gears, mechanical transmissions, mechatronics, computational and experimental methods, dynamics of mechanisms and machines, micromechanisms and microactuators, and history of mechanisms and transmissions. Following MeTrApp 2011 and 2013, held under the auspices of the IFToMM, these proceedings of the 3rd Conference on Mechanisms, Transmissions and Applications offer a platform for original research presentations for researchers, scientists, industry experts and students in the fields of mechanisms and transmissions with special emphasis on industrial applications in order to stimulate the exchange of new and innovative ideas.

  4. The German radiation protection ordinance: revised edition 2001. Text edition with an explanatory introduction. 6. tot. new rev. ed.

    The text edition with an explanatory introduction is intended to help readers from the various professions involved in matters of radiation protection keep abreast of the relevant legislation. (orig./CB)

  5. 3rd International Conference Nanotechnology and Nanomaterials

    Yatsenko, Leonid

    2016-01-01

    This book presents some of the latest achievements in nanotechnology and nanomaterials from leading researchers in Ukraine, Europe, and beyond. It features contributions from participants in the 3rd International Science and Practice Conference Nanotechnology and Nanomaterials (NANO2015) held in Lviv, Ukraine on August 26-30, 2015. The International Conference was organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), Ivan Franko National University of Lviv (Ukraine), University of Turin (Italy), Pierre and Marie Curie University (France), and European Profiles A.E. (Greece). Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results on topics ranging from nanooptics, nanoplasmonics, and interface studies to energy storage and biomedical applications. Presents cutting-edge advances in nanocomposites and carbon and silicon-based nanomaterials for a wide range of engine...

  6. 77 FR 72985 - Health Information Technology: Revisions to the 2014 Edition Electronic Health Record...

    2012-12-07

    ... September 4, 2012 Federal Register (77 FR 54163), the Secretary issued a final rule (the ``2014 Edition EHR... Catalog In the 2014 Edition EHR certification criteria final rule (77 FR 54163), we adopted the Data... accepted by CMS. As noted in the 2014 Edition EHR certification criteria final rule (77 FR 54232),...

  7. 3rd CEAS Specialist Conference on Guidance, Navigation and Control

    Drouin, Antoine; Roos, Clément

    2015-01-01

    The two first CEAS (Council of European Aerospace Societies) Specialist Conferences on Guidance, Navigation and Control (CEAS EuroGNC) were held in Munich, Germany in 2011 and in Delft, The Netherlands in 2013. ONERA The French Aerospace Lab, ISAE (Institut Supérieur de l’Aéronautique et de l’Espace) and ENAC (Ecole Nationale de l’Aviation Civile) accepted the challenge of jointly organizing the 3rd edition. The conference aims at promoting new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems. It represents a unique forum for communication and information exchange between specialists in the fields of GNC systems design and operation, including air traffic management. This book contains the forty best papers and gives an interesting snapshot of the latest advances over the following topics: l  Control theory, analysis, and design l  Novel navigation, estimation, and tracking methods l  Aircr...

  8. New Features in the Revised Edition of the Records of the Grand Historian%《史记》修订本亮点管窥

    芮文浩

    2014-01-01

    In September 2013, Zhonghua Book Company published the revised edition of Historical Records.Compared with the edition published in 1959 , the revised one is an upgraded edition .In order to produce a good version , many different editions were selected.While emendating, the revised edition focuses on the internal evidences of Historical Records.In some significant re-spects, the revision does not change the texts rashly , but makes some important evidences in certain collating notes , thus made the revision well-informed and suspend judgment on the things in doubt , which showed the revised version was loyal to the master edi-tion.The sophisticated collation and punctuation make the revised edition of Historical Records present numerous new features ,then the revision takes on a new look .%中华书局2013年9月出版的《史记》修订本是原1959年点校本的升级本。在校勘方面,修订本择善本予以全面校勘,并在校改时注重内证,对某些歧义较大的问题在校勘记中提出重要的证据,多闻阙疑,不轻易改字,忠实于底本。精审的校点使得《史记》修订本亮点纷呈,修订本也因此面貌一新。

  9. Application of the Revised Provisions for Transport of Fissile Material in the IAEA Regulations for the Safe Transport of Radioactive Material. 2012 Edition

    In 2012, the IAEA published IAEA Safety Standards No. SSR-6, Regulations for the Safe Transport of Radioactive Material, 2012 Edition, a revision of the IAEA regulations. The 2012 Edition includes major revisions to the provisions that allow exceptions to the use of competent authority approved package designs for the transport of fissile material. These revisions address safety concerns identified by Member States by providing a graded approach with consistent assurance of criticality safety. Where possible, practical needs identified by industry as beneficial to efficiency and clarity in applying the regulations are addressed. This publication provides the background and overview to the revised requirements, as well as providing practical advice regarding the use of the revised provisions

  10. "Convenience Editing" in Action: Comparing English Teachers' and Medical Professionals' Revisions of a Medical Abstract

    Willey, Ian; Tanimoto, Kimie

    2012-01-01

    Native English-speaking (NES) English teachers at universities in English as a foreign language (EFL) contexts are sometimes asked to edit English manuscripts written by non-native English-speaking (NNES) colleagues in scientific fields. However, professional peers may differ from English teachers in their approach towards editing scientific…

  11. A Practical Guide for Translators (Third Revised Edition). Topics in Translation 13.

    Samuelsson-Brown, Geoffrey

    This third edition of a guide for translators contains more information than the second edition and looks at translation as a business as well as an occupation, focusing on marketing and quality control. It is designed for people with little or no practical experience with translation in a commercial environment. The 16 chapters examine these…

  12. The 3rd International Symposium on Avian Brood Parasitism

    2013-01-01

    正Invited participants on the 3rd International Symposium on Avian Brood Parasitism, sponsored by Hainan Normal University (HNU), China, Norwegian University of Science and Technology (NTNU), Norway, the Research Council of Norway, and China Ornithological Society (COS).

  13. Magnet Free Generators - 3rd Generation Wind Turbine Generators

    Jensen, Bogi Bech; Mijatovic, Nenad; Henriksen, Matthew Lee

    2013-01-01

    This paper presents an introduction to superconducting wind turbine generators, which are often referred to as 3rd generation wind turbine generators. Advantages and challenges of superconducting generators are presented with particular focus on possible weight and efficiency improvements. A...

  14. CERN Library | Ted Wilson presents "Engines of discovery: a century of particle accelerators" (revised and expanded edition) | 22 July

    2014-01-01

    Particle accelerators exploit the cutting edge of every aspect of today's technology and have themselves contributed to many of these technologies. The largest accelerators have been constructed as research tools for nuclear and high energy physics and there is no doubt that it is this field that has sustained their development culminating in the Large Hadron Collider.   Engines of discovery: a century of particle accelerators (revised and expanded edition), by Andrew Sessler and Ted Wilson, World Scientific, 2014, ISBN 9789814417198. An earlier book by the same authors, Engines of Discovery: A Century of Particle Accelerators, chronicled the development of these large accelerators and colliders, emphasising the critical discoveries in applied physics and engineering that drove the field. Particular attention was given to the key individuals who contributed, the methods they used to arrive at their particular discoveries and inventions, often recalling how their human strengths and attit...

  15. Nordic Criminal Statistics 1950-2010 : Summary of a report. 8th revised edition

    von Hofer, Hanns; Lappi-Seppälä, Tapio; Westfelt, Lars

    2012-01-01

    In a joint Nordic project, criminal statistics from Denmark, Finland, Norway and Sweden were compiled under the auspices of the Nordic Committee on Criminal Statistics (NUK) and were published under the title Nordisk kriminalstatistik 1950-1980 in 1982. In December of 1982, the first abbreviated English language version of this report was published.  For this 8th edition of the English version, the original data have been updated for the years up to and including 2010 and now cover 61 years o...

  16. Regulations for the Safe Transport of Radioactive Materials. 1964 Revised Edition

    In 1961 the International Atomic Energy Agency, within the framework of its statutory functions and in accordance with recommendations made by its Preparatory Commission and by the Economic and Social Council of the United Nations, published safety regulations which could be applied to the national and international transport of radio active materials by all means of transport. At the same time, the Director General of the Agency indicated that these regulations would be revised at appropriate intervals in consultation with Member States and the organizations concerned and invited suggestions for their improvement in the light of experience and increased knowledge. In preparing the revised regulations presented in this document, the Agency has received considerable support from its Member States and the organizations concerned, which have made extensive studies and suggestions in order to assist in its work. The Agency also convened several meetings of experts from its Member States and of representatives of a number of international organizations, and has been represented in several meetings convened by those organizations. In publishing the revised transport regulations which result from that co-ordinated effort, the Agency aims at proposing a lasting framework of principles and rules, complemented by appropriate technical data, acceptable for the safe transport of radio active materials by air, land and water. In particular, the developments which have been introduced concerning the packaging requirements, the nuclear safety criteria for the transport of fissile materials and the methods for testing packages should facilitate the international acceptance of packages by the authorities concerned. The Board of Governors of the Agency approved the revised regulations in June and September 1964. It authorized the Director General to apply them, as appropriate, to Agency operations and Agency assisted operations and to recommend to Member States and to the

  17. The revision process for the 1996 edition of the IAEA's Regulations for the Safe Transport of Radioactive Materials, Safety Series No. 6

    The next edition of the IAEA's Regulations for the Safe Transport of Radioactive Material, Safety Series No. 6, (SS6) is scheduled to be published in 1996. This will be the end of the current review and revision cycle for SS6. Four meetings of the revision panel will have been held during this time. The first three meetings of the revision panel for this cycle were held in 1991, 1993, and 1994, and the forth and final meeting of the revision panel is scheduled for the fall of 1995. This final meeting will be the culmination of ten years of effort and will result in a substantially changed SS6. Many proposed amendments have already been approved by the three previous revision panels and many issues still remain to be resolved. This paper discusses what changes have been approved to date and what issues are still left for the last revision panel to resolve. The changes that are approved during this revision cycle will effect the transport of radioactive material well into the next century, since the next scheduled revision of SS6 is not until 2006

  18. Minutes of the 3rd World Integrative Medicine Congress

    2007-01-01

    @@ With its mottos of Inheritance,Innovation,Harmonization,and Development,the 3rd World Integrative Medicine Congress has been held in Guangzhou,China from September 22 to 24,2007,sponsored by the Chinese Association of Integrative Medicine and co-organized by Guangdong Provincial Academy of Chinese Medical Sciences.

  19. 3rd Semester and Master’s Thesis Ideas 2013

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd seme...

  20. 3rd Semester and Master’s Thesis Ideas 2011

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester p...

  1. 3rd Semester and Master’s Thesis Ideas 2012

    Clausen, Johan

    The report contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester p...

  2. PREFACE: 3rd International Congress on Mechanical Metrology (CIMMEC2014)

    2015-10-01

    From October 14th to 16th 2014, The Brazilian National Institute of Metrology, Quality, and Technology (Inmetro) and the Brazilian Society of Metrology (SBM) organized the 3rd International Congress on Mechanical Metrology (3rd CIMMEC). The 3rd CIMMEC was held in the city of Gramado, Rio Grande do Sul, Brazil. Anticipating the interest and enthusiasm of the technical-scientific community, the Organizing Institutions invite people and organizations to participate in this important congress, reiterating the commitment to organize an event according to highest international standards. This event has been conceived to integrate people and organizations from Brazil and abroad in the discussion of advanced themes in metrology. Manufacturers and dealers of measuring equipment and standards, as well as of auxiliary accessories and bibliographic material, had the chance to promote their products and services in stands at the Fair, which has taken place alongside the Congress. The 3rd CIMMEC consisted of five Keynote Speeches and 116 regular papers. Among the regular papers, the 25 most outstanding ones, comprising a high quality content on Mechanical Metrology, were selected to be published in this issue of Journal of Physics: Conference Series. It is our great pleasure to present this volume of Journal of Physics: Conference Series to the scientific community to promote further research in Mechanical Metrology and related areas. We believe that this volume will be both an excellent source of scientific material in the fast evolving fields that were covered by CIMMEC 2014.

  3. Impressions from the 3rd Nordcode Seminar & Workshop

    Lenau, Torben Anker; Boelskifte, Per; Hansen, Claus Thorp

    2005-01-01

    This paper summarises the purpose and contents of the 3rd Nordcode Seminar and Workshop. First, the workshop assignments are described. Second, the paper briefly presents the topics of the keynote speeches and all presentations of the working papers that took place in the seminar....

  4. Environmental impact data for fuels. Part 2: Background information and technical appendix (New revised edition)

    This report is a compilation of data concerning environmental impacts from the utilization of different fuels. The entire life cycle is studied, from the extraction of raw materials to combustion. The fuels under study are gasoline, gasoline with MTBE, diesel, fuel oil, LPG, coal, natural gas, peat, refuse, ethanol, RME, DME, methane and wood fuels (forestry residues, Salix, pellets/briquettes). Utilization areas studied are heating plants, cogeneration plants, power plants, domestic boilers, and light and heavy vehicles. In this new edition, the following changes were made: New life cycle analyses have been included, a few new fuels added, electricity from hydroelectric plants, wind power plants and nuclear power plants have been included and some other minor changes

  5. Strategies of Qualitative Inquiry. Third Edition

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    2007-01-01

    "Strategies of Qualitative Inquiry, Third Edition," the second volume in the paperback version of "The SAGE Handbook of Qualitative Research, 3rd Edition," consists of Part III of the handbook ("Strategies of Inquiry"). "Strategies of Qualitative Inquiry, Third Edition" presents the major tactics--historically, the research methods--that…

  6. Frisbee - the first artificial cervical disc of 3RD generation

    Karin Büttner-Janz; Bernhard Meyer; Rafael Donatus Sambale; Hans-Joachim Wilke; Nelli Rüdiger; Eiko Büttner

    2014-01-01

    OBJECTIVE: The current cervical disc arthroplasty is limited by postoperative facet joint arthritis, heterotopic ossification and segmental kyphosis. The total Frisbee disc, which has an upper convex/concave non-spherical surface and a lower flat sliding surface, is a new approach for improved outcomes. Prior to clinical application, safety and suitability tests are required. METHODS: The Frisbee is the first 3rd generation disc according to a new classification of total disc because it can...

  7. Developing new levels of edit

    Prono, J.K.

    1997-06-01

    Since 1985, Los Alamos National Laboratory (LANL) staff have had four levels of edit to choose from for technical reports. When a CQI survey showed that both authors and editors felt the levels were not meeting author needs, LANL set about revising them. The goals were to simplify the editing process, focus editing on improving technical clarity, and ensure value added in editing. This paper describes the revision process and product--three author-based levels of edit.

  8. Guidelines for the Diagnosis and Treatment of Chronic Functional Constipation in Korea, 2015 Revised Edition

    Shin, Jeong Eun; Jung, Hye-Kyung; Lee, Tae Hee; Jo, Yunju; Lee, Hyuk; Song, Kyung Ho; Hong, Sung Noh; Lim, Hyun Chul; Lee, Soon Jin; Chung, Soon Sup; Lee, Joon Seong; Rhee, Poong-Lyul; Lee, Kwang Jae; Choi, Suck Chei; Shin, Ein Soon

    2016-01-01

    The Korean Society of Neurogastroenterology and Motility first published guidelines for chronic constipation in 2005 and was updated in 2011. Although the guidelines were updated using evidence-based process, they lacked multidisciplinary participation and did not include a diagnostic approach for chronic constipation. This article includes guidelines for diagnosis and treatment of chronic constipation to realistically fit the situation in Korea and to be applicable to clinical practice. The guideline development was based upon the adaptation method because research evidence was limited in Korea, and an organized multidisciplinary group carried out systematical literature review and series of evidence-based evaluations. Six guidelines were selected using the Appraisal of Guidelines for Research & Evaluation (AGREE) II process. A total 37 recommendations were adopted, including 4 concerning the definition and risk factors of chronic constipation, 8 regarding diagnoses, and 25 regarding treatments. The guidelines are intended to help primary physicians and general health professionals in clinical practice in Korea, to provide the principles of medical treatment to medical students, residents, and other healthcare professionals, and to help patients for choosing medical services based on the information. These guidelines will be updated and revised periodically to reflect new diagnostic and therapeutic methods. PMID:27226437

  9. Modelling the human cardiac fluid mechanics. 3rd ed.

    Oertel, Herbert; Krittian, Sebastian; Spiegel, Kathrin

    2009-01-01

    The third edition of this article on the modelling and simulation of the flow in human hearts supplements earlier editions. It discusses the flow-structure coupled heart model KAHMO FSI (Karlsruhe Heart Model) and examines patient-specific clinical application of the heart model for cardiac surgery. The KAHMO heart model can be used to predict flow losses and flow structures due to pathalogical ventricle defects. These are considered before and after surgery.

  10. 3rd International Conference on Intelligent Technologies and Engineering Systems

    2016-01-01

    This book includes the original, peer reviewed research from the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014), held in December, 2014 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: Automation and robotics, fiber optics and laser technologies, network and communication systems, micro and nano technologies, and solar and power systems. This book also Explores emerging technologies and their application in a broad range of engineering disciplines Examines fiber optics and laser technologies Covers biomedical, electrical, industrial, and mechanical systems Discusses multimedia systems and applications, computer vision and image & video signal processing.

  11. Chinese Students in Irish 3rd Level Education

    Heavey, Anita

    2006-01-01

    This paper aims to examine some of the issues Chinese students face in Irish 3rd level Education. I will look at some of the cultural, social and academic issues that may influence the quality of a Chinese students learning experience in a Western system. I will begin by looking at Irelands involvement with Chinese student recruitment and then briefly look at Chinas educational history. This will put the situation into context and allow me to examine some of the problems encountered by the Ch...

  12. Revised

    Johannsen, Vivian Kvist; Nord-Larsen, Thomas; Riis-Nielsen, Torben;

    This report is a revised analysis of the Danish data on CO2 emissions from forest, afforestation and deforestation for the period 1990 - 2008 and a prognosis for the period until 2020. Revision have included measurements from 2009 in the estimations. The report is funded by the Ministry of Climate...

  13. Designing a 3rd generation, authenticatable attribute measurement system

    Attribute measurement systems (AMS) are designed to measure potentially sensitive items containing Special Nuclear Materials to determine if the items possess attributes which fall within an agreed-upon range. Such systems could be used in a treaty to inspect and verify the identity of items in storage without revealing any sensitive information associated with the item. An AMS needs to satisfy two constraints: the host party needs to be sure that none of their sensitive information is released, while the inspecting party wants to have confidence that the limited amount of information they see accurately reflects the properties of the item being measured. The former involves 'certifying' the system and the latter 'authenticating' it. Previous work into designing and building AMS systems have focused more on the questions of certifiability than on the questions of authentication - although a few approaches have been investigated. The next step is to build a 3rd generation AMS which (1) makes the appropriate measurements, (2) can be certified, and (3) can be authenticated (the three generations). This paper will discuss the ideas, options, and process of producing a design for a 3rd generation AMS.

  14. 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications

    Koziel, Slawomir; Kacprzyk, Janusz; Leifsson, Leifur; Ören, Tuncer

    2015-01-01

    This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

  15. Prognostic factors and significance of the revised 6th edition of the AJCC classification in patients with locally advanced nasopharyngeal carcinoma

    Kalogera-Fountzila, A.; Karanikolas, D.; Sarafopoulos, A.; Ikonomou, I.; Dimitriadis, A.S. [Dept. of Radiology, AHEPA Hospital, Aristotle Univ. of Thessaloniki (Greece); Katodritis, N. [Bank of Cyprus Oncology Center, Nicosia (Cyprus); Samantas, E. [' ' Agii Anargiri' ' Cancer Hospital, Athens (Greece); Zamboglou, N.; Tselis, N. [Dept. of Radiation Oncology, Klinikum Offenbach (Germany); Fountzilas, G. [Dept. of Medical Oncology, ' ' Papageorgiou' ' General Hospital, Thessaloniki (Greece); Hellenic Cooperative Oncology Group (HeCOG) Data Office, Athens (Greece)

    2006-08-15

    Purpose: To compare the 4th edition 1992 and 6th edition 2002 of the American Joint Committee on Cancer (AJCC) staging systems, to evaluate the paranasopharyngeal structures and lymph node involvement, and to define the prognostic significance of the above factors to overall survival (OS) in patients with locally advanced nasopharyngeal carcinoma (NPC). Patients and Methods: CT images of 162 patients, who were diagnosed with NPC and received irradiation alone or chemotherapy and irradiation, were retrospectively reviewed. CT scans, performed prior to and after the completion of treatment, were reviewed. Results: The parapharyngeal space was found to be involved very commonly (98%). 50 of 162 patients (31%) displayed parapharyngeal extension of the tumor to degree A, 59 patients (36%) showed degree B, and 50 patients (31%) degree C nasopharyngeal extension. According to the AJCC 6th edition 2002, patients were distributed into stages IIA, IIB, III, IVA, and IVB. By contrast, using the AJCC 4th edition 1992, patients were distributed into stages III and IV only. After a median follow up of 71.1 months, median survival was 60.7 months, with a 2-year survival rate of 71.3% and a 3-year survival rate of 62.2%. Multivariate analysis identified age, degree of parapharyngeal lateral extension, cavernous-sinus-infiltration, and size of infiltrated lymph nodes as independent prognostic factors for OS. Conclusion: The 6th revision of TNM staging reported herein, provides a more uniform distribution of patients between stages. The degree of tumor extension into the parapharyngeal space should be considered in future TNM staging revisions. (orig.)

  16. Announcement: Release of CDC's 2016 Model Aquatic Health Code, Second Edition and Revised Hyperchlorination and Fecal Incident Response Recommendations.

    2016-01-01

    The 2016 Model Aquatic Health Code (MAHC), Second Edition was released on July 15, 2016 (http://www.cdc.gov/mahc/editions/current.html). MAHC is national guidance that can be voluntarily adopted by state and local jurisdictions to minimize the risk for illness and injury at public aquatic facilities through facility design, construction, operation, maintenance, and management. PMID:27442593

  17. New technical knowledge to be implemented to the revision of rules on pipe wall thinning management for PWR Plants. 2006 edition

    Rules for PWR plant pipe wall thinning management were formulated by the Japan Society of Mechanical Engineers in 2006. Since then thinning management of Japanese PWR plants has been carried out based on this rule. Pipe wall thinning phenomena to be dealt with in this rule have been identified in many piping components of power plants. New technical knowledge has been accumulated since the issuance of 2006 edition. We have formulated these knowledge and information about the thinning phenomena in PWR power plants. Given the history of application of this rule, we have to make our best effort to carry out a study of latest technical knowledge and implement them to the revision of rule and improve pipe wall thinning management. This paper summarizes the new technical knowledge and basis to be implemented to the revision of rules on pipe wall thinning management for PWR plants in Japan. (author)

  18. 3rd International Conference on Nanotechnologies and Biomedical Engineering

    Tiginyanu, Ion

    2016-01-01

    This volume presents the proceedings of the 3rd International Conference on Nanotechnologies and Biomedical Engineering which was held on September 23-26, 2015 in Chisinau, Republic of Moldova. ICNBME-2015 continues the series of International Conferences in the field of nanotechnologies and biomedical engineering. It aims at bringing together scientists and engineers dealing with fundamental and applied research for reporting on the latest theoretical developments and applications involved in the fields. Topics include Nanotechnologies and nanomaterials Plasmonics and metamaterials Bio-micro/nano technologies Biomaterials Biosensors and sensors systems Biomedical instrumentation Biomedical signal processing Biomedical imaging and image processing Molecular, cellular and tissue engineering Clinical engineering, health technology management and assessment; Health informatics, e-health and telemedicine Biomedical engineering education Nuclear and radiation safety and security Innovations and technology transfer...

  19. 3rd Computer Science On-line Conference

    Senkerik, Roman; Oplatkova, Zuzana; Silhavy, Petr; Prokopova, Zdenka

    2014-01-01

    This book is based on the research papers presented in the 3rd Computer Science On-line Conference 2014 (CSOC 2014).   The conference is intended to provide an international forum for discussions on the latest high-quality research results in all areas related to Computer Science. The topics addressed are the theoretical aspects and applications of Artificial Intelligences, Computer Science, Informatics and Software Engineering.   The authors provide new approaches and methods to real-world problems, and in particular, exploratory research that describes novel approaches in their field. Particular emphasis is laid on modern trends in selected fields of interest. New algorithms or methods in a variety of fields are also presented.   This book is divided into three sections and covers topics including Artificial Intelligence, Computer Science and Software Engineering. Each section consists of new theoretical contributions and applications which can be used for the further development of knowledge of everybod...

  20. 3rd grade English language learners making sense of sound

    Suarez, Enrique; Otero, Valerie

    2013-01-01

    Despite the extensive body of research that supports scientific inquiry and argumentation as cornerstones of physics learning, these strategies continue to be virtually absent in most classrooms, especially those that involve students who are learning English as a second language. This study presents results from an investigation of 3rd grade students' discourse about how length and tension affect the sound produced by a string. These students came from a variety of language backgrounds, and all were learning English as a second language. Our results demonstrate varying levels, and uses, of experiential, imaginative, and mechanistic reasoning strategies. Using specific examples from students' discourse, we will demonstrate some of the productive aspects of working within multiple language frameworks for making sense of physics. Conjectures will be made about how to utilize physics as a context for English Language Learners to further conceptual understanding, while developing their competence in the English language.

  1. 3rd International Workshop on Turbulent Spray Combustion

    Gutheil, Eva

    2014-01-01

    This book reflects the results of the 2nd and 3rd International Workshops on Turbulent Spray Combustion. The focus is on progress in experiments and numerical simulations for two-phase flows, with emphasis on spray combustion. Knowledge of the dominant phenomena and their interactions allows development of predictive models and their use in combustor and gas turbine design. Experts and young researchers present the state-of-the-art results, report on the latest developments and exchange ideas in the areas of experiments, modelling and simulation of reactive multiphase flows. The first chapter reflects on flame structure, auto-ignition and atomization with reference to well-characterized burners, to be implemented by modellers with relative ease. The second chapter presents an overview of first simulation results on target test cases, developed at the occasion of the 1st International Workshop on Turbulent Spray Combustion. In the third chapter, evaporation rate modelling aspects are covered, while the fourth ...

  2. Organizational Knowledge Communication – a Nascent 3rd Order Disciplinarity

    Kastberg, Peter

    2014-01-01

    There is an emerging tendency that the organizational communication functions of larger companies enter into a symbiotic relationship with the companies’ Knowledge Management function. A tendency this journal has labelled Organizational Knowledge Communication. This should come as no surprise to...... neither the researcher nor the practitioner; after all who can say where a corporation’s knowledge work ends and where its organizational communication begins – and vice versa? In this paper I will present a theoretical account of the three disciplinary trajectories that, in my view, have given rise to...... Organizational Knowledge Communication, i.e., organization studies, communication theory and Knowledge Management, respectively. In their synthesis the three trajectories form a disciplinary triple helix, a triple helix which, in turn, gives rise to Organizational Knowledge Communication as a novel, 3rd order...

  3. 3rd International Conference on Computational Mathematics and Computational Geometry

    Ravindran, Anton

    2016-01-01

    This volume presents original research contributed to the 3rd Annual International Conference on Computational Mathematics and Computational Geometry (CMCGS 2014), organized and administered by Global Science and Technology Forum (GSTF). Computational Mathematics and Computational Geometry are closely related subjects, but are often studied by separate communities and published in different venues. This volume is unique in its combination of these topics. After the conference, which took place in Singapore, selected contributions chosen for this volume and peer-reviewed. The section on Computational Mathematics contains papers that are concerned with developing new and efficient numerical algorithms for mathematical sciences or scientific computing. They also cover analysis of such algorithms to assess accuracy and reliability. The parts of this project that are related to Computational Geometry aim to develop effective and efficient algorithms for geometrical applications such as representation and computati...

  4. 3rd grade English language learners making sense of sound

    Suarez, Enrique

    2012-01-01

    Despite the extensive body of research that supports scientific inquiry and argumentation as cornerstones of physics learning, these strategies continue to be virtually absent in most classrooms, especially those that involve students who are learning English as a second language. This study presents results from an investigation of 3rd grade students' discourse about how length and tension affect the sound produced by a string. These students came from a variety of language backgrounds, and all were learning English as a second language. Our results demonstrate varying levels, and uses, of experiential, imaginative, and mechanistic reasoning strategies. Using specific examples from students' discourse, we will demonstrate some of the productive aspects of working within multiple language frameworks for making sense of physics. Conjectures will be made about how to utilize physics as a context for English Language Learners to further conceptual understanding, while developing their competence in the English l...

  5. Introduction to Recreation Services for People with Disabilities: A Person-Centered Approach. 3rd Edition

    Bullock, Charles C.; Mahon, Michael J.; Killingsworth, Charles L.

    2010-01-01

    Ultimately, all successful recreation programs center around its participants wants and needs. Serving people with disabilities is no exception. "Introduction to Recreation Services for People with Disabilities" is intended to be an introductory book for anyone planning or working in the parks, recreation, and leisure service industry. Through…

  6. An introduction to Kolmogorov complexity and its applications. - 3rd edition

    M. Li; P. Vitányi

    2008-01-01

    Written by two experts in the field, this book is ideal for advanced undergraduate students, graduate students, and researchers in all fields of science. It is self-contained: it contains the basic requirements from mathematics, probability theory, statistics, information theory, and computer scienc

  7. Principles and Applications of Imaging Radar, Manual of Remote Sensing, 3rd Edition, Volume 2

    Moran, M. Susan

    Aerial photographs and digital images from orbiting optical scanners are a daily source of information for the general public through newspapers, television, magazines, and posters. Such images are just as prevalent in scientific journal literature. In the last 6 months, more than half of the weekly issues of Eos published an image acquired by a remote digital sensor. As a result, most geoscientists are familiar with the characteristics and even the acronyms of the current satellites and their optical sensors, common detector filters, and image presentation. In many cases, this familiarity has bred contempt. This is so because the limitations of optical sensors (imaging in the visible and infrared portions of the electromagnetic spectrum) can be quite formidable. Images of the surface cannot be acquired through clouds, and image quality is impaired with low-light conditions (such as at polar regions), atmospheric scattering and absorption, and variations in sun/sensor/surface geometry.

  8. Teaching Organic Farming and Gardening: Resources for Instructors, 3rd Edition. Part 2 - Applied Soil Science

    2015-01-01

    Part 2, Applied Soil Science, covers basic information on soil chemistry, soil physical properties, and soil biology and ecology, providing a more detailed overview of the underlying scientific principles that inform many of the organic farming practices covered in Part 1.

  9. How Things Work: The Physics of Everyday Life, 3rd Edition

    Bloomfield, Louis A.

    2005-09-01

    This book is an unconventional introduction to physics and science that starts with whole objects and looks inside them to see what makes them work. It's written for students who seek a connection between science and the world in which they live. How Things Work brings science to the reader rather than the reverse. Like the course in which it developed, this book has always been for nonscientists and is written with their interests in mind. Nonetheless, it has attracted students from the sciences, engineering, architecture, and other technical fields who wish to put scientific concepts into context. This book is written in English and organized in a case-study fashion. It conveys an understanding and appreciation for physics by finding physics concepts and principles within the familiar objects of everyday experience. Because its structure is defined by real-life examples, this book necessarily discusses concepts as they're needed and then revisits them later on when they reappear in other objects. Lou Bloomfield is a highly dedicated teacher and one of the most popular professors at University of Virginia, and was the recipient of the 1998 State of Virginia Outstanding Faculty Award. Lou has given talks all over the country on teaching physics through everyday objects. He has extreme attention to detail and knowledge of technical physics. He is very tech savvy and has been able to provide many of the photos and illustrations for the text himself.

  10. ASPHALT FOR OFF-STREET PAVING AND PLAY AREAS, 3RD EDITION.

    Asphalt Inst., College Park, MD.

    THIS PAMPHLET DISCUSSES THE ALTERNATIVE METHODS, APPLICATIONS, AND TECHNICAL CONSIDERATIONS FOR OFF-STREET PAVING AND PLAY AREAS. OFF-STREET PAVING INCLUDES--(1) ASPHALT-PAVED PARKING AREAS, (2) ROOF DECK PARKING AREAS, (3) ASPHALT-PAVED DRIVEWAYS, (4) ASPHALT-PAVED SERVICE STATION LOTS, AND (5) SIDEWALKS. THE DISCUSSION OF PLAY AREAS…

  11. Teaching Elementary Mathematics: A Resource for Field Experiences. 3rd Edition

    Smith, Nancy L.

    2006-01-01

    This book is a hands-on field manual for elementary school teachers. It features a range of activities that offer opportunities for reflection while enhancing student field experiences, through observation and practicum. The first section of the book provides activities that focus on collecting information about the school and its resources, and…

  12. United States Savings Bonds Seminar: Seminar Leader's Guide. 3rd Edition.

    Department of the Treasury, Washington, DC.

    This leader's guide is designed for use in conducting a seminar to train bank employees in correct procedures for issuing and redeeming U.S. Savings Bonds and in answering routine customer inquiries concerning savings bonds. Included in the first section of the guide are an overview of the purpose and content of the seminar, procedures for…

  13. Shilpa. 1990 Revised Edition.

    Hansen, Carol; And Others

    This document presents a collection of materials designed to help students learn about the culture of India through an examination of the country's folk art tradition. Sections on folk crafts, folk dances, folk music, and puppets are included. Each section contains numerous activities. A glossary and an extensive bibliography, folk music scores,…

  14. 3rd Joint Dutch-Brazil School on Theoretical Physics

    2015-01-01

    The Joint Dutch-Brazil School on Theoretical Physics is now in its third edition with previous schools in 2007 and 2011. This edition of the school will feature minicourses by Nima Arkani-Hamed (IAS Princeton), Jan de Boer (University of Amsterdam) and Cumrun Vafa (Harvard University), as well as student presentations. The school is jointly organized with the Dutch Research School of Theoretical Physics (DRSTP) and is intended for graduate students and researchers in the field of high-energy theoretical physics. There is no registration fee and limited funds are available for local and travel support of participants. This school in São Paulo will be preceded by the XVIII J. A. Swieca School in Campos de Jordão.

  15. 75 FR 55313 - Record of Decision (ROD) for Conversion of the 3rd Armored Cavalry Regiment (3rd ACR) to a...

    2010-09-10

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF DEFENSE Department of the Army Record of Decision (ROD) for Conversion of the 3rd Armored Cavalry Regiment (3rd ACR) to a Stryker Brigade Combat Team (SBCT) at Fort Hood, TX AGENCY: Department of the Army, DoD....

  16. The 3rd colloquium on process simulation. Proceedings

    Jokilaakso, A. [ed.

    1996-12-31

    The presentations collected in this volume were presented at the 3rd Colloquium on Process Simulation held at Helsinki University of Technology, Espoo, Finland, June 12-14, 1996. In the more developed industrial nations, the processes for producing chemicals, energy, and materials encounter environmental concern and laws which challenge engineers to develop the processes towards more efficient, economical and safe operation. This necessitates more thorough understanding of the processes and phenomena involved. Formerly, the development of the processes was largely based on trial and error, whereas today, the development of computer performance together with the diversification of modelling software enables simulation of the processes. The increased capacity and possibilities for modelling the processes brought by the improved hardware and software, have generated a strong demand for more accurate mathematical descriptions of the processes. Especially, the coupling of computational fluid dynamics and chemical kinetics, combustion, and thermodynamics is of current interest in process oriented technology. This colloquium attempts to give examples of modelling efforts in operation in different universities, research institutes and companies. Furthermore, the aim of this colloquium is to offer an annual opportunity to the researchers to come together and discuss their common problems and the state of their investigations

  17. The 3rd irradiation test plan of DUPIC fuel

    Yang, Myung Seung; Song, K. C.; Park, J. H. and others

    2001-05-01

    The objective of the 3rd irradiation test of DUPIC fuel at the HANARO is to estimate the in-core behaviour of a DUPIC pellet that is irradiated up to more than average burnup of CANDU fuel. The irradiation of DUPIC fuel is planned to start at May 21, 2001, and will be continued at least for 8 months. The burnup of DUPIC fuel through this irradiation test is thought to be more than 7,000 MWd/tHE. The DUPIC irradiation rig instrumented with three SPN detectors will be used to accumulate the experience for the instrumented irradiation and to estimate the burnup of irradiated DUPIC fuel more accurately. Under normal operating condition, the maximum linear power of DUPIC fuel was estimated as 55.06 kW/m, and the centerline temperature of a pellet was calculated as 2510 deg C. In order to assess the integrity of DUPIC fuel under the accident condition postulated at the HANARO, safety analyses on the locked rotor and reactivity insertion accidents were carried out. The maximum centerline temperature of DUPIC fuel was estimated 2590 deg C and 2094 deg C for each accident, respectively. From the results of the safety analysis, the integrity of DUPIC fuel during the HANARO irradiation test will be secured. The irradiated DUPIC fuel will be transported to the IMEF. The post-irradiation examinations are planned to be performed at the PIEF and IMEF.

  18. Academic Training: 3rd Term - 01 April - 30 June 2005

    Françoise Benz

    2005-01-01

    2004 - 2005 ACADEMIC TRAINING PROGRAMME 3rd Term - 01 April - 30 June 2005 REGULAR LECTURE PROGRAMME Monte Carlo generators fot the LHC by T. Sjostrand / CERN-PH 4, 5, 6, 7 April The LHC machine experiment interface by S. Tapprogge / Univ. Gutenberg, Mainz, D R. Assmann, CERN-AB, E. Tsesmelis and D. Macina / CERN-TS 18, 19, 20, 21, 22 April Cosmology for particle physicists by S. Carroll / Univ. of Chicago, USA 9, 10, 11, 12, 13 May The ITER projects: technological challenges by P. Bruzzone / EPFL CRPP, Zürich, CH J. Lister / EPFL CRPP, Lausanne, CH 30, 31 May, 1, 2, 3 June String theory by C. Johnson / Univ. of Southern California, USA 6, 7, 8, 9, 10 June Small may be beautiful By M. Davier / LAL, Orsay, F. T. Soldner / ILL, Grenoble, F. 13, 14, 15, 16, 17 June Climate change and challenges for the environment by C. Schluchter / Univ. Bern. CH 20, 21, 22 June LECTURE SERIES FOR POSTGRADUATE STUDENTS Particle detectors - principles and techniques by C. Joram, L. Ropelewski, M. Moll, C. ...

  19. 3rd Course of the International School of Advanced Geodesy

    Sansò, Fernando

    1985-01-01

    During the period April 25th to May 10th, 1984 the 3rd Course of the International School of Advanced Geodesy entitled "Optimization and Design of Geodetic Networks" took place in Erice. The main subject of the course is clear from the title and consisted mainly of that particular branch of network analysis, which results from applying general concepts of mathematical optimization to the design of geodetic networks. As al­ ways when dealing with optimization problems, there is an a-priori choice of the risk (or gain) function which should be minimized (or maximized) according to the specific interest of the "designer", which might be either of a scientific or of an economic nature or even of both. These aspects have been reviewed in an intro­ ductory lecture in which the particular needs arising in a geodetic context and their analytical representations are examined. Subsequently the main body of the optimization problem, which has been conven­ tionally divided into zero, first, second and third order desi...

  20. The effect of surgical technique on lingual nerve damage during lower 3rd molar removal by dental students.

    Robinson, P P; Loescher, A R; Smith, K G

    1999-05-01

    We have previously shown that avoidance of lingual flap retraction with a Howarth periosteal elevator during lower 3rd molar removal, reduces the incidence of lingual nerve damage. In that study, the surgery was undertaken by qualified staff and we have now assessed the effect of revising the method taught to our junior undergraduate dental students. We evaluated the outcome of surgery undertaken by 2 consecutive years of students, each group being taught 1 of the 2 methods. A total of 200 patients requiring lower 3rd molar removal under local anaesthesia were included in the study. In year 1, the surgery included elevation of a lingual flap and insertion of a Howarth elevator adjacent to the lingual plate; in year 2 this part of the procedure was avoided by using a purely buccal approach. There were no significant differences between the levels of tooth eruption and types of impaction of the teeth removed in each year. Lingual sensory disturbance occurred in 3 patients in the 'flap' group (3.3%) and in 1 patient (0.9%) in the 'no flap' group. As this incidence is not significantly different in the 2 groups (P 3rd molar removal does not appear to place the lingual nerve at greater risk. In view of the results of our previous study, we therefore advocate this method for use in undergraduate dental education. PMID:10530161

  1. PREFACE: 3rd International Conference on Hadron Physics (TROIA'11)

    Erkol, Güray; Küçükarslan, Ayşe; Özpineci, Altuğ

    2012-03-01

    The 3rd International Conference on Hadron Physics, TROIA'11 was held at Canakkale, Turkey on 22-25 August 2011. Ozyegin University, Middle East Technical University, Canakkale Onsekiz Mart University and HadronPhysics2 Consortium sponsored the conference. Its aim was to bring together the experts and young scientists working on experimental and theoretical hadron physics. About 60 participants from 12 countries attended the conference. The topics covered included: Chiral Perturbation Theory QCD Sum Rules Effective Field Theory Exotic Hadrons Hadron Properties from Lattice QCD Experimental Results and Future Perspectives Hadronic Distribution Amplitudes The conference presentations were organized such that the morning sessions contained invited talks and the afternoon sessions were devoted to contributed talks and poster presentations. The speakers of the invited talks were: D Melikhov, M Nielsen, M Oka, E Oset, S Scherer, T T Takahashi and R Wanke. The conference venue was a resort hotel near Canakkale. As a social program, a guided full-day excursion to the excavation site of the ancient town of Troia and Assos was organized. We believe that this conference provided a medium for young scientists and experts in the field to effectively communicate and share ideas. We would like to express our sincere thanks to all participants for their contributions and stimulating discussions. We are also grateful to the Scientific Secretary, Kadir Utku Can, and all other members of the Organizing Committee for their patience and efforts. 13 February 2012 The Editors Güray Erkol Ayşe Küçükarslan Altuğ Özpineci Conference photograph

  2. Frisbee - the first artificial cervical disc of 3RD generation

    Karin Büttner-Janz

    2014-03-01

    Full Text Available OBJECTIVE: The current cervical disc arthroplasty is limited by postoperative facet joint arthritis, heterotopic ossification and segmental kyphosis. The total Frisbee disc, which has an upper convex/concave non-spherical surface and a lower flat sliding surface, is a new approach for improved outcomes. Prior to clinical application, safety and suitability tests are required. METHODS: The Frisbee is the first 3rd generation disc according to a new classification of total disc because it can precisely mimic the segmental ROM, including the soft limitation of axial rotation. The ISO 18192-1 test was carried out to determine the rate of wear debris. A FE model was used to assess the safety of prosthetic components. In the sagittal plane several variables to determine the most favorable lordotic angle were evaluated. RESULTS: Two angled prosthetic plates are safer than one sliding angled core to prevent the displacement. The lordosis of 7° of the Frisbee leads to kyphosis of no more than 2° without reduction of the ROM. The wear rate of the Frisbee is five times smaller compared to an FDA-approved disc with a spherical sliding surface. CONCLUSIONS: Based on the test results, the clinical application of Frisbee can now be studied. The postoperative kyphosis observed with other devices is not an issue with the Frisbee design. Physiological ROM is combined with the significant reduction of wear debris. For these reasons the Frisbee has the potential to provide a better balanced segmental loading reducing the degeneration of the joint surface and heterotopic ossification.

  3. 3rd Active Flow and Combustion Control Conference

    2015-01-01

    The book reports on the latest theoretical and experimental advances in the  field of active flow and combustion control. It covers new developments in actuator technology and sensing, in robust and optimal open- and closed-loop control, as well as in model reduction for control. It collects contributions presented during the third edition of the Active Flow and Combustion Control conference, held in September 10-12, 2014 at the Technische Universität Berlin (Germany). This conference, as well as the research presented in the book, have been supported by the collaborative research center SFB 1029 -Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics, funded by the DFG (German Research Foundation).

  4. PREFACE: 3rd International Symposium ''Optics and its Applications''

    Calvo, M. L.; Dolganova, I. N.; Gevorgyan, N.; Guzman, A.; Papoyan, A.; Sarkisyan, H.; Yurchenko, S.

    2016-01-01

    The SPIE.FOCUS Armenia: 3rd International Symposium ''Optics and its Applications'' (OPTICS-2015) http://rau.am/optics2015/ was held in Yerevan, Armenia, in the period October 1 - 5, 2015. The symposium was organized by the International Society for Optics and Photonics (SPIE), the Armenian SPIE student chapter with collaboration of the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-PYRKAL, and the Yerevan State University (YSU). The Symposium was co-organized by the SPIE & OSA student chapters of BMSTU, the Armenian OSA student chapter, and the SPIE student chapters of Lund University and Wroclaw University of Technology. The symposium OPTICS-2015 was dedicated to the International Year of Light and Light-Based Technologies. OPTICS-2015 was devoted to modern topics and optical technologies such as: optical properties of nanostructures, silicon photonics, quantum optics, singular optics & its applications, laser spectroscopy, strong field optics, biomedical optics, nonlinear & ultrafast optics, photonics & fiber optics, and mathematical methods in optics. OPTICS-2015 was attended by 100 scientists and students representing 17 countries: Armenia, China, Czech Republic, France, Georgia, Germany, India, Iran, Italy, Latvia, Mexico, Poland, Russia, Saudi Arabia, Sweden, Ukraine, and USA. Such a broad international community confirmed the important mission of science to be a uniting force between different countries, religions, and nations. We hope that OPTICS-2015 inspired and motivated students and young scientists to work in optics and in science in general. The present volume of Journal of Physics: Conference Series includes proceedings of the symposium covering various aspects of modern problems in optics. We are grateful to all people who were involved in the organization process. We gratefully acknowledge support from

  5. PREFACE: 3rd International Congress on Ceramics (ICC3)

    Niihara, Koichi; Ohji, Tatsuki; Sakka, Yoshio

    2011-10-01

    Early in 2005, the American Ceramic Society, the European Ceramic Society and the Ceramic Society of Japan announced a collaborative effort to provide leadership for the global ceramics community that would facilitate the use of ceramic and glass materials. That effort resulted in an agreement to organize a new biennial series of the International Congress on Ceramics, convened by the International Ceramic Federation (ICF). In order to share ideas and visions of the future for ceramic and glass materials, the 1st International Congress on Ceramics (ICC1) was held in Canada, 2006, under the organization of the American Ceramic Society, and the 2nd Congress (ICC2) was held in Italy, 2008, hosted by the European Ceramic Society. Organized by the Ceramic Society of Japan, the 3rd Congress (ICC3) was held in Osaka, Japan, 14-18 November 2010. Incorporating the 23rd Fall Meeting of the Ceramic Society of Japan and the 20th Iketani Conference, ICC3 was also co-organized by the Iketani Science and Technology Foundation, and was endorsed and supported by ICF, Asia-Oceania Ceramic Federation (AOCF) as well as many other organizations. Following the style of the previous two successful Congresses, the program was designed to advance ceramic and glass technologies to the next generation through discussion of the most recent advances and future perspectives, and to engage the worldwide ceramics community in a collective effort to expand the use of these materials in both conventional as well as new and exciting applications. ICC3 consisted of 22 voluntarily organized symposia in the most topical and essential themes of ceramic and glass materials, including Characterization, design and processing technologies Electro, magnetic and optical ceramics and devices Energy and environment related ceramics and systems Bio-ceramics and bio-technologies Ceramics for advanced industry and safety society Innovation in traditional ceramics It also contained the Plenary Session and the

  6. Human exposure to soil contamination: a qualitative and quantitative analysis towards proposals for human toxicological intervention values (partly revised edition)

    Berg R van den; LBG

    1994-01-01

    In view of a revision of the Dutch Soil Protection act, proposals are presented in this report for human toxicologically based intervention values for soil and groundwater, calculated from human toxicological guideline values and human exposure. To this purpose the exposure model CSOIL is presented

  7. Book of abstracts of the 3rd International conference and the 3rd International School for young scientists Interaction of hydrogen isotopes with structural materials. IHISM-07

    The book involves abstracts of presentations at the 3rd International Conference and the 3rd International School for Young Scientists Interaction of Hydrogen Isotopes with Structural Materials (IHISM-07). The activities of Russian and foreign scientific centers associated with the use of hydrogen isotopes in power engineering, national economy and basic research are considered. The presentations cover the following areas: kinetics and interaction between hydrogen isotopes and solids including effects of radiogenic helium accumulation, hydrides and hydride transformations; structural transformations and mechanical properties; equipment and research techniques

  8. Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5). Recommendations (Spanish Edition)

    This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

  9. Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5). Recommendations (Arabic Edition)

    This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

  10. Nuclear security recommendations on physical protection of nuclear material and nuclear facilities (INFCIRC/225/Revision 5). Recommendations (Chinese Edition)

    This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

  11. The Movement Imagery Questionnaire-Revised, Second Edition (MIQ-RS Is a Reliable and Valid Tool for Evaluating Motor Imagery in Stroke Populations

    Andrew J. Butler

    2012-01-01

    Full Text Available Mental imagery can improve motor performance in stroke populations when combined with physical therapy. Valid and reliable instruments to evaluate the imagery ability of stroke survivors are needed to maximize the benefits of mental imagery therapy. The purposes of this study were to: examine and compare the test-retest intra-rate reliability of the Movement Imagery Questionnaire-Revised, Second Edition (MIQ-RS in stroke survivors and able-bodied controls, examine internal consistency of the visual and kinesthetic items of the MIQ-RS, determine if the MIQ-RS includes both the visual and kinesthetic dimensions of mental imagery, correlate impairment and motor imagery scores, and investigate the criterion validity of the MIQ-RS in stroke survivors by comparing the results to the KVIQ-10. Test-retest analysis indicated good levels of reliability (ICC range: .83–.99 and internal consistency (Cronbach α: .95–.98 of the visual and kinesthetic subscales in both groups. The two-factor structure of the MIQ-RS was supported by factor analysis, with the visual and kinesthetic components accounting for 88.6% and 83.4% of the total variance in the able-bodied and stroke groups, respectively. The MIQ-RS is a valid and reliable instrument in the stroke population examined and able-bodied populations and therefore useful as an outcome measure for motor imagery ability.

  12. 75 FR 34450 - Filing Dates for the Indiana Special Election in the 3rd Congressional District

    2010-06-17

    ... General Election on November 2, 2010, to fill the U.S. House seat in the 3rd Congressional District... has not previously filed a report, the first report must cover all activity that occurred before...

  13. Operation results of 3-rd generation nuclear fuel WWER-440 in initial period

    On unit 4 of Kola NPP trial operation of 3-rd generation's fuel began in 2010. Fuel assemblies of 3-rd generation (FA-3) have a number of design features that provide better operational characteristics. Concise description of a design and the basic advantages of fuel of 3-rd generation are described in articles. Increasing of efficiency of nuclear fuel usage will be achieved by reduction of the parasitic capture of thermal neutrons in constructional materials (weight of zirconium is reduced), optimization of uranium-water relation (increase in fuel elements step), increasing of uranium loading (usage of fuel pellets with increased diameter and without central hole in them). By results of trial operation mass transition to use of given type of assemblies in WWER-440 is possible. This report presents the basic outcomes of the trial operation, a brief survey of the obtained data. The basic characteristics of the reactor core with fuel of 3-rd generation are resulted in work. (authors)

  14. TUNNEL CHANNEL PROJECT VERSUS 3rd BRIDGE PROJECT OVER THE BOSPHORUS STRAIT

    ŞENER, Orhan

    2015-01-01

    This project deals with the problems of landroad dominated transportation system in Istanbul, and compares the social costs and benefits of Channel Tunnel (tube) and 3rd Bridge Projets respectively. Although, cost-benefit analysis of both projects proves that,the Channel Tunnel Project is indispensible with regard to principles of public economy. But, this project has been postponed, since big business successfully exerted heavy influence over the politicians in favour of 3rd Bridge Project o...

  15. The 3rd-order nonlinearity of bacteriorhodopsin by four-wave mixing

    2000-01-01

    The 3rd-order nonlinear optical susceptibility X(3) and the response time of the light-transducing biomolecule bacteriorhodopsin were measured with the four-wave mixing technique and a picosecond frequency-doubled Nd:YAG laser(532nm).The X(3) and the response time measured are 10-9 esu and 20 ps,respectively.The possible mechanism for generating the 3rd-order nonlinear optical susceptibility X(3) and response time were discussed.

  16. Key Success Factors of 3rd Generation Mobile Network Services for M-Commerce in Malaysia

    Saravanan Muthaiyah

    2004-01-01

    While there has been a great deal of excitement in view of M-commerce, very little is actually known about conditions and critical success factors for successful introduction of the 3rd generation mobile network services here in Malaysia. This study investigates the factors for successful diffusion of 3G network services and their role in advancing an interactive marketplace. 3G which simply means 3rd generation mobile communications technology has been widely discussed by many telecommunicat...

  17. The relationship of JNC and JCO in the uranium processing plant criticality accident. The second revision edition

    On September 30th 1999, the criticality accident occurred at JCO's uranium conversion building in Tokai. The accident occurred during reconversion from U3O8 to uranium nitrate solution (UNH) with uranium enriched 18.8% and about 60 kgU. JCO contracted with JNC to supply UNH that is fuel material for the experimental fast breeder reactor 'JOYO'. JNC has contracted with JCO that had started nuclear fuel material processing business following a definite policy of Japanese government and developed SUMITOMO ADU PROCESS'. JNC made the first contract with JCO in 1985 and has made a contact every year. There had never been a problem in their products. JNC inspected products based on contract. JNC discharge our duty as customer inspecting products based on contract. As for safety control, JCO had taken licensing safety review and had been permitted to be 'a processing facility'. Therefore JNC understood that JCO produced following this license. 'The Uranium Processing Plant Criticality Accident Investigation' showed that JCO had been taking a different method from the permit and violating the license. However JNC had never been explained about that and JCO's operation procedures had never described about that. Therefore the Criticality Accident couldn't be avoided. The reports is the revision of former JNC TN8420 2003-003. (author)

  18. File list: Pol.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available Pol.Lar.20.AllAg.3rd_instar dm3 RNA polymerase Larvae 3rd instar SRX287908,SRX28790...7,SRX013070,SRX013082 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Pol.Lar.20.AllAg.3rd_instar.bed ...

  19. File list: InP.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available InP.Lar.20.AllAg.3rd_instar dm3 Input control Larvae 3rd instar SRX467108,SRX287726...67103,SRX288024,SRX288023,SRX104976,SRX016172,SRX467107,SRX016173 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/InP.Lar.20.AllAg.3rd_instar.bed ...

  20. File list: ALL.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available ALL.Lar.10.AllAg.3rd_instar dm3 All antigens Larvae 3rd instar SRX104963,SRX104968,...SRX287718,SRX022334,SRX104976,SRX467107,SRX013086,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.10.AllAg.3rd_instar.bed ...

  1. File list: Unc.Lar.10.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available Unc.Lar.10.AllAg.3rd_instar dm3 Unclassified Larvae 3rd instar SRX1038029,SRX103803...1,SRX1038032,SRX1038030,SRX032124,SRX032123,SRX022335,SRX022334,SRX013058 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Unc.Lar.10.AllAg.3rd_instar.bed ...

  2. The Role of Training and Promotion to Increase The 3rd Party Funds Indonesian Islamic Banking

    Rahmat Hidayat

    2014-03-01

    Full Text Available Objective – This study aims to determine whether the role of training is much larger than the promotion in raising third-party funds in Islamic banks in Indonesia given the cost of the training is spent is greater than the cost of promotion. This study empirically examines the relationship and impact of training and promotion to raise funds for a 3rd party in Indonesia Islamic banks.Methods – This study uses secondary data Islamic commercial banks in the form of panel (time-series and cross-section of Bank Indonesia data from 2010 until 2012. There are two independent variables training cost (X1 and promotion cost (X2 and one dependent variable is 3rd-party funds (Y. The analysis technique used path analysis to examine the role of training and the promotion of financial performance (The 3rd Party Funds.Result – Simultaneously, training and promotion gives an effect by 52%, and partially or individual training gives an insignificant negative effect, while the promotion has a significant positive impact on financial performance (financial-party funds on Islamic banking.Conclusion – The role of promotion is higher in raising The 3rd Party Funds than training. Keywords : Cost, Training, Promotion, The 3rd Party Funds 

  3. Nair handbook. 1995 edition

    This Handbook contains general background, administrative and technical information for those participating in the National Arrangements for Incidents involving Radioactivity (NAIR), updating and replacing the previous edition published in 1987. The overriding need for revision was brought about as a result of changes introduced by British Telecom to the telephone numbers of establishments. (UK)

  4. An evaluation of the primary 3rd grade English language teaching program: Tekirdağ case

    Çankaya, Pınar

    2015-01-01

    The present study attempts to find out active English teachers’ opinions regarding the primary 3rd grade ELTP (launched in 2013) in terms of its general overview, content, goals, teaching-learning process and assessment dimensions under the heading of “An Evaluation of the Primary 3rd Grade English Language Teaching Program: Tekirdağ Case” . The study was carried out in the city center of Tekirdağ including 20 state primary schools with 38 teachers in the academic term 2014-2015 spring. In th...

  5. FOREWORD: 3rd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2013)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2013-10-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 3rd International Workshop on New Computational Methods for Inverse Problems, NCMIP 2013 (http://www.farman.ens-cachan.fr/NCMIP_2013.html). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 22 May 2013, at the initiative of Institut Farman. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 (http://www.farman.ens-cachan.fr/NCMIP_2012.html). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational

  6. PREFACE: 3rd Workshop on Theory, Modelling and Computational Methods for Semiconductors (TMCSIII)

    Califano, Marco; Migliorato, Max; Probert, Matt

    2012-05-01

    These conference proceedings contain the written papers of the contributions presented at the 3rd International Conference on Theory, Modelling and Computational Methods for Semiconductor materials and nanostructures. The conference was held at the School of Electronic and Electrical Engineering, University of Leeds, Leeds, UK on 18-20 January 2012. The previous conferences in this series took place in 2010 at St William's College, York and in 2008 at the University of Manchester, UK. The development of high-speed computer architectures is finally allowing the routine use of accurate methods for calculating the structural, thermodynamic, vibrational, optical and electronic properties of semiconductors and their hetero- and nano-structures. The scope of this conference embraces modelling, theory and the use of sophisticated computational tools in semiconductor science and technology, where there is substantial potential for time-saving in R&D. Theoretical approaches represented in this meeting included: Density Functional Theory, Tight Binding, Semiempirical Pseudopotential Methods, Effective Mass Models, Empirical Potential Methods and Multiscale Approaches. Topics included, but were not limited to: Optical and Transport Properties of Quantum Nanostructures including Colloids and Nanotubes, Plasmonics, Magnetic Semiconductors, Graphene, Lasers, Photonic Structures, Photovoltaic and Electronic Devices. This workshop ran for three days, with the objective of bringing together UK and international leading experts in the theoretical modelling of Group IV, III-V and II-VI semiconductors, as well as students, postdocs and early-career researchers. The first day focused on providing an introduction and overview of this vast field, aimed particularly at students, with several lectures given by recognised experts in various theoretical approaches. The following two days showcased some of the best theoretical research carried out in the UK in this field, with several

  7. Litigating for change: proceedings from the 3rd Symposium on HIV, Law and Human Rights. Introduction.

    2011-10-01

    From 9-10 June 2011, the 3rd Symposium on HIV, Law and Human Rights took place in Toronto, drawing over 150 participants from across Canada. The event built on the success of the two previous Symposia and brought together policymakers, legal professionals, health researchers, students, activists, community organizations and people living with HIV or from communities particularly affected by HIV. PMID:22165282

  8. Special issue featuring articles from the 3rd Asian Symposium on Biomineralization

    2008-01-01

    @@ This issue contains a selection of nine peer-reviewed articles that were presented during the 3rd Asian Symposium on Biomineralization held in Xiamen,China on 21-23 November,2007.The symposium focused on the recent development of mechanisms of biomineralization and its applications in novel biomaterials,environmental issues,geophysics and nano-biotechnologies.

  9. Participants to the 3rd HEP Information Resources Summit, 6-7 May 2009

    Fermilab, Photo Service

    2009-01-01

    The broad theme of the 3rd HEP Information Resources Summit was "Collaboration between Information Services." As HEP increasingly borders fields such as instrumentation and astrophysics, it was discussed what potential interrelationships and communication this group have to serve this broader research community seamlessly.

  10. Evaluation of the "Respect Not Risk" Firearm Safety Lesson for 3rd-Graders

    Liller, Karen D.; Perrin, Karen; Nearns, Jodi; Pesce, Karen; Crane, Nancy B.; Gonzalez, Robin R.

    2003-01-01

    The purpose of this study was to evaluate the MORE HEALTH "Respect Not Risk" Firearm Safety Lesson for 3rd-graders in Pinellas County, Florida. Six schools representative of various socioeconomic levels were selected as the test sites. Qualitative and quantitative data were collected. A total of 433 matched pretests/posttests were used to…

  11. Sandstone columns of the 3rd Nile Cataract (Nubia, Northern Sudan)

    Cílek, Václav; Adamovič, Jiří; Suková, L.

    Wroclaw: University of Wroclaw, 2012 - (Duszynski, F.; Swirad, Z.). s. 11-11 [Sandstone Landscapes (3.). 25.04.2012-28.04.2012, Kudowa-Zdrój] Institutional research plan: CEZ:AV0Z30130516 Keywords : geoarchaeology * sandstones * 3rd Nile Cataract Subject RIV: DB - Geology ; Mineralogy

  12. The 3rd World Integrative Medicine Congress Was Held in Guangzhou

    2007-01-01

    @@ The 3rd World Integrative Medicine Congress was held in Guangzhou,China,from September 22 to 24,2007,sponsored by the Chinese Association of the Integrative Medicine and co-organized by Guangdong Provincial Hospital of Chinese Medicine,Guangdong Integrative Medicine Association and Guangdong Provincial Academy of Chinese Medical Sciences.

  13. Using Food as a Tool to Teach Science to 3rd Grade Students in Appalachian Ohio

    Duffrin, Melani W.; Hovland, Jana; Carraway-Stage, Virginia; McLeod, Sara; Duffrin, Christopher; Phillips, Sharon; Rivera, David; Saum, Diana; Johanson, George; Graham, Annette; Lee, Tammy; Bosse, Michael; Berryman, Darlene

    2010-01-01

    The Food, Math, and Science Teaching Enhancement Resource (FoodMASTER) Initiative is a compilation of programs aimed at using food as a tool to teach mathematics and science. In 2007 to 2008, a foods curriculum developed by professionals in nutrition and education was implemented in 10 3rd-grade classrooms in Appalachian Ohio; teachers in these…

  14. The 3rd China Standardization Forum Held in Urumqi, Xinjiang Uygur Autonomous Region

    2005-01-01

    @@ On Aug. 14th-15th, the 3rd China Standardization Forum, hosted by Standardization Administration of China(SAC), sponsored by China Association for Standardization (CAS) and associated by the Bureau of Quality &Technical Supervision of Xinjiang Uygur Autonomous Region of the People's Republic of China, was held in Urumqi, Xinjiang.

  15. Summary of the 3rd LHC Crab Cavity Workshop (LHC-CC09)

    Calaga, R.; Zimmermann, Frank; Koutchouk, Jean-Pierre; Delayen, Jean; Pierini, Paolo; Ciapala, Edmond; McIntosh, Peter; Giovannozzi, Massimo; Brüning, Oliver; Collier, Paul; Funakoshi, Yoshihiro

    2010-01-01

    The 3rd workshop on crab compensation for the LHC luminosity upgrade (LHC-CC09) was held September 16-18, 2008 at CERN, Geneva, Switzerland. The workshop was organized by joint collaboration of CERN, EUCARD, KEK and US-LARP. Approximately 50 workshop participants from 3 continents and several institutions discussed the future strategy of implementing crab cavities in the LHC

  16. Malaria and fetal growth alterations in the 3(rd) trimester of pregnancy

    Schmiegelow, Christentze; Minja, Daniel Thomas; Oesterholt, Mayke;

    2013-01-01

    Pregnancy associated malaria is associated with decreased birth weight, but in-utero evaluation of fetal growth alterations is rarely performed. The objective of this study was to investigate malaria induced changes in fetal growth during the 3(rd) trimester using trans-abdominal ultrasound....

  17. Addressing the burden of mental, neurological, and substance use disorders: key messages from Disease Control Priorities, 3rd edition.

    Patel, Vikram; Chisholm, Dan; Parikh, Rachana; Charlson, Fiona J; Degenhardt, Louisa; Dua, Tarun; Ferrari, Alize J; Hyman, Steve; Laxminarayan, Ramanan; Levin, Carol; Lund, Crick; Medina Mora, María Elena; Petersen, Inge; Scott, James; Shidhaye, Rahul; Vijayakumar, Lakshmi; Thornicroft, Graham; Whiteford, Harvey

    2016-04-16

    The burden of mental, neurological, and substance use (MNS) disorders increased by 41% between 1990 and 2010 and now accounts for one in every 10 lost years of health globally. This sobering statistic does not take into account the substantial excess mortality associated with these disorders or the social and economic consequences of MNS disorders on affected persons, their caregivers, and society. A wide variety of effective interventions, including drugs, psychological treatments, and social interventions, can prevent and treat MNS disorders. At the population-level platform of service delivery, best practices include legislative measures to restrict access to means of self-harm or suicide and to reduce the availability of and demand for alcohol. At the community-level platform, best practices include life-skills training in schools to build social and emotional competencies. At the health-care-level platform, we identify three delivery channels. Two of these delivery channels are especially relevant from a public health perspective: self-management (eg, web-based psychological therapy for depression and anxiety disorders) and primary care and community outreach (eg, non-specialist health worker delivering psychological and pharmacological management of selected disorders). The third delivery channel, hospital care, which includes specialist services for MNS disorders and first-level hospitals providing other types of services (such as general medicine, HIV, or paediatric care), play an important part for a smaller proportion of cases with severe, refractory, or emergency presentations and for the integration of mental health care in other health-care channels, respectively. The costs of providing a significantly scaled up package of specified cost-effective interventions for prioritised MNS disorders in low-income and lower-middle-income countries is estimated at US$3-4 per head of population per year. Since a substantial proportion of MNS disorders run a chronic and disabling course and adversely affect household welfare, intervention costs should largely be met by government through increased resource allocation and financial protection measures (rather than leaving households to pay out-of-pocket). Moreover, a policy of moving towards universal public finance can also be expected to lead to a far more equitable allocation of public health resources across income groups. Despite this evidence, less than 1% of development assistance for health and government spending on health in low-income and middle-income countries is allocated to the care of people with these disorders. Achieving the health gains associated with prioritised interventions will require not just financial resources, but committed and sustained efforts to address a range of other barriers (such as paucity of human resources, weak governance, and stigma). Ultimately, the goal is to massively increase opportunities for people with MNS disorders to access services without the prospect of discrimination or impoverishment and with the hope of attaining optimal health and social outcomes. PMID:26454360

  18. Teaching Organic Farming and Gardening: Resources for Instructors, 3rd Edition. Part 1 - Skills and Practices

    2015-01-01

    Part 1 of the manual, Organic Farming and Gardening Skills and Practices, emphasizes the “how-to” aspects of organic gardening and farming, including propagation, irrigation, tillage, transplanting, and compost production. This 11-unit section also introduces students to critical skills and considerations in the management of soil fertility and agricultural pests (arthropods, diseases, and weeds) in organic systems. The information included in the manual is based on certified organic producti...

  19. Improvements for international medicine donations: a review of the World Health Organization Guidelines for Medicine Donations, 3rd edition.

    Cañigueral-Vila, Nuria; Chen, Jennifer C; Frenkel-Rorden, Lindsey; Laing, Richard

    2015-01-01

    Some humanitarian and development organizations respond to major natural disasters and emergencies by donating medicines. Many provide medicines on a routine basis to support health systems, particularly those run by Faith-Based Organizations. Although such donations can provide essential medicines to populations in great need, inappropriate donations also take place, with burdensome consequences. The World Health Organization (WHO) has developed the interagency Guidelines for Medicine Donations for use by donors and recipients in the context of emergency aid and international development assistance. Although comprehensive in nature and transferable to various emergency situations, adjustments to both content and formatting would improve this resource. Recommendations for the next version of these guidelines include: specific wording and consistent formatting; definition of who is a recipient, clear distinction between acute and long-term emergencies, and proper donation procedures pertaining to each; inclusion of visual aides such as flowcharts, checklists, and photos; and improving the citations system. PMID:26525948

  20. Improvements for international medicine donations: a review of the World Health Organization Guidelines for Medicine Donations, 3rd edition

    Cañigueral-Vila, Nuria; Chen, Jennifer C.; Frenkel-Rorden, Lindsey; Laing, Richard

    2015-01-01

    Some humanitarian and development organizations respond to major natural disasters and emergencies by donating medicines. Many provide medicines on a routine basis to support health systems, particularly those run by Faith-Based Organizations. Although such donations can provide essential medicines to populations in great need, inappropriate donations also take place, with burdensome consequences. The World Health Organization (WHO) has developed the interagency Guidelines for Medicine Donati...

  1. Red list of Czech spiders: 3rd edition, adjusted according to evidence-based national conservation priorities

    Řezáč, M.; Kůrka, A.; Růžička, Vlastimil; Heneberg, P.

    2015-01-01

    Roč. 70, č. 5 (2015), s. 645-666. ISSN 0006-3088 Grant ostatní: MZe(CZ) RO0415 Institutional support: RVO:60077344 Keywords : evidence-based conservation * extinction risk * invertebrate surveys Subject RIV: EG - Zoology Impact factor: 0.827, year: 2014

  2. Teaching Organic Farming and Gardening: Resources for Instructors, 3rd Edition. Part 3 - Social and Environmental Issues in Agriculture

    2015-01-01

    Part 3, Social and Environmental Issues in Agriculture, first outlines the history and development of agriculture in the U.S. and then introduces students to social and environmental issues associated with conventional agriculture practices and the current organization of the food system. This section also introduces the concept of sustainable agriculture and current food justice efforts, and some of the existing obstacles to more sustainable food and agriculture systems.

  3. Living Tomorrow... An Inquiry into the Preparation of Young People for Working Life in Europe. 3rd Edition.

    Deforge, Ives

    Technological advances have created changes in working life. Automation displaces more workers than the service industry can absorb. The jobs that are left are often downgraded from the complexity they have formerly enjoyed. As society becomes more and more automated, unemployment becomes structural. How do we prepare young people for the jobs of…

  4. Automotive Electronics. Teacher Edition (Revised).

    Mackert, Howard C.; Heiserman, Russell L.

    This learning module addresses computers and their applications in contemporary automobiles. The text provides students with information on automotive microcomputers and hands-on activities that will help them see how semiconductors and digital logic devices fit into the modern repair facility. The module contains nine instructional units that…

  5. PreK-3rd: Educational Transition in USA%美国的教育衔接举措:PreK-3^rd

    郭力平; 谢萌; 陈宇卿

    2012-01-01

    美国的PreK-3^rd改革聚焦从早期教育至小学三年级的教育衔接问题,旨在为3~8岁儿童提供高质量的教育,在增进教育公平,减少学生学业成绩差距的同时,促使早期教育的学习成效能够长期保持积极影响。当前,美国儿童的学业成绩差距出现更早,差距更大;学前教育不够系统;小学低年级存在早期教育成效消退现象。鉴于这一现状,PreK-3^rd改革强调要普及全目制早期教育,建设高素质师资队伍,建立相匹配的绩效责任体系,完善管理架构,以促进教育衔接。%American PreK-3rd reform focuses on the educational transition from early childhood education to the 3rd grade education. The purpose of the reform is to provide high quality education for 3-8 year old children and maintain positive influence early childhood education produces on learning. Currently, the gap of American children's learning achievements is wider and appears earlier. American early childhood education is not quite systematic and it can be observed that learning effectiveness subsides in lower grades. Thus, PreK-3rd reform focuses on the popularization of full time early childhood education, training high quality teachers, building up matching performance and responsibility system and perfecting managing structure so as to improve the transition from kindergartens to elementary schools.

  6. File list: His.Lar.50.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available His.Lar.50.AllAg.3rd_instar dm3 Histone Larvae 3rd instar SRX287824,SRX215502,SRX33...SRX013040,SRX104977,SRX215500,SRX331367,SRX287703,SRX331379,SRX287728,SRX287720,SRX287727,SRX215499 http://dbar...chive.biosciencedbc.jp/kyushu-u/dm3/assembled/His.Lar.50.AllAg.3rd_instar.bed ...

  7. File list: Oth.Lar.20.AllAg.3rd_instar [Chip-atlas[Archive

    Full Text Available Oth.Lar.20.AllAg.3rd_instar dm3 TFs and others Larvae 3rd instar SRX318781,SRX31878...04974,SRX104972,SRX104973,SRX287660,SRX287659,SRX495306,SRX467110,SRX104971,SRX33...1403,SRX495243 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/Oth.Lar.20.AllAg.3rd_instar.bed ...

  8. Conference report: the 3rd Global CRO Council for Bioanalysis at the International Reid Bioanalytical Forum.

    Breda, Massimo; Garofolo, Fabio; Caturla, Maria Cruz; Couerbe, Philippe; Maltas, John; White, Peter; Struwe, Petra; Sangster, Timothy; Riches, Suzanne; Hillier, Jim; Garofolo, Wei; Zimmerman, Thomas; Pawula, Maria; Collins, Eileen; Schoutsen, Dick; Wieling, Jaap; Green, Rachel; Houghton, Richard; Jeanbaptiste, Bernard; Claassen, Quinton; Harter, Tammy; Seymour, Mark

    2011-12-01

    The 3rd Global CRO Council Closed Forum was held on the 3rd and 4th July 2011 in Guildford, United Kingdom, in conjunction with the 19th International Reid Bioanalytical Forum. In attendance were 21 senior-level representatives from 19 CROs on behalf of nine European countries and, for many of the attendees, this occasion was the first time that they had participated in a GCC meeting. Therefore, this closed forum was an opportunity to increase awareness of the aim of the GCC and how it works, share information about bioanalytical regulations and audit findings from different agencies, their policies and procedures and also to discuss some topics of interest and aim to develop ideas and provide recommendations for bioanalytical practices at future GCC meetings in Europe. PMID:22185271

  9. 2007: 3rd Jameson - D.I.T Faculty of Tourism and Food Cocktail Competition

    Murphy, James Peter

    2007-01-01

    The 3rd Jameson - D.I.T Faculty of Tourism and Food Cocktail Competition took place on Thursday November 29th 2007, this initiative between the Faculty of Tourism and Food and Jameson offered over 60 hospitality and bartending students currently studying and working in the hospitality and licensed trade industries the opportunity to improve their skills in creative drinks mixing, in direct response to the growing demand for new cocktails and exciting new drinks to suit every season. Overall p...

  10. Evaluation of paracavernous cranial nerves (3rd to 6th) with CT

    We have now used CT to evaluate the cavernous sinuses, especially the 3rd, 4th, 5th, and 6th cranial nerves. adjacent to them. Twenty cases, presumably all having sellar or parasellar lesions, were examined by means of thin-slice (2-4 mm) axial and coronal (including both direct and reconstructed methods) CT studies. Moreover, three blocks of the sellar region obtained from adult cadavers were examined beforehand by CT scan, and the courses of the respective paracavernous cranial nerves were confirmed by microsurgical dissection. As a result, the following conclusions were obtained. 1. It was valuable to perform a post-enhanced direct coronal study for the definite identification of the paracavernous cranial nerves (3rd to 6th cranial nerves). 2. Also valuable was a magnified CT film of the parasellar regions, which made the identification of the parasellar cranial nerves clearer. 3. In the clinical cases showing a normal shape of the cavernous sinuses on CT, each cranial nerve was evaluated. In the axial studies (almost 10 to 15 degrees anterior to Reid's basal line), the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 76%, 97% (as to the Gasserian ganglion), and 21% respectively. None of the 4th cranial nerve was visualized in the cases examined. On the other hand, the frequencies of the identification of the 3rd, 5th, and 6th cranial nerves were 83%, 86%, and 21% respectively in the direct coronal studies and 62%, 57%, and 4% in those of the reconstructed films. The visualization of each cranial nerve in the direct coronal study was better than when the reconstructed method was used. Finally, a schematic presentation of the cranial nerves adjacent to the cavernous sinuses was made in the axial and coronal projections. (J.P.N.)

  11. Insights from the 3rd World Congress on Integrated Computational Materials Engineering

    Howe, D.; Goodlet, B.; Weaver, J.; Spanos, G.

    2016-05-01

    The 3rd World Congress on Integrated Computational Materials Engineering (ICME) was a forum for presenting the "state-of-the-art" in the ICME discipline, as well as for charting a path for future community efforts. The event concluded with in an interactive panel-led discussion that addressed such topics as integrating efforts between experimental and computational scientists, uncertainty quantification, and identifying the greatest challenges for future workforce preparation. This article is a summary of this discussion and the thoughts presented.

  12. Sandstone columns of the 3rd Nile Cataract (Nubia, Northern Sudan)

    Cílek, Václav; Adamovič, Jiří; Suková, L.

    2015-01-01

    Roč. 59, Supplement 1 (2015), s. 151-165. ISSN 0372-8854 Grant ostatní: Program interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100130902 Institutional support: RVO:67985831 Keywords : Nubian sandstone * columnar jointing * Voronoi fragmentation * 3rd Nile Cataract * Sudan Subject RIV: DB - Geology ; Mineralogy Impact factor: 0.734, year: 2014

  13. 3rd Workshop on Semantic Ambient Media Experience (SAME) - In Conjunction with AmI-2010

    Lugmayr, Artur; Stockleben, Bjoern; Kaario, Juha; Pogorelc, Bogdan; Risse, Thomas

    The SAME workshop takes place for the 3rd time in 2010, and it's theme in this year was creating the business value-creation, vision, media theories and technology for ambient media. SAME differs from other workshops due to its interactive and creative touch and going beyond simple powerpoint presentations. Several results will be published by AMEA - the AMbient Media Association (www.ambientmediaassociation.org.

  14. Meet Cambodia's Needs——The 3rd China Auto International Exhibition Tour

    2009-01-01

    @@ The 3rd China Auto International Exhibition Tour in 2005 gathered 39 well-known Chinese home brands,traveled across the Indo-China Peninsula and finally arrived at Phnom Penh,the capital of Cambodia.The Chinese automobiles got warm welcome from the local people due to the low price and good quality of the Chinese automobiles and living standard of this developing country.

  15. A 3rd Order Low Power Switched Current Sigma-Delta Modulator

    Jørgensen, Ivan Herald Holger; Bogason, Gudmundur

    This paper presents a 3rd order switched current Sigma-Delta modulator. The Sigma-Delta modulator operates at a sampling rate of 600kHz and the signal band is 5.5kHz, i.e. an oversampling factor of 54.5 is used. Multiple input signals are used to reduce the internal signal swings which results in...

  16. ChemSession'06 - 3rd Seminary of Warsaw PhD Students in Chemistry. Abstracts

    3rd Annual Seminary of Warsaw PhD Students in Chemistry presented the latest achievements in chemistry, obtained in all Warsaw universities and scientific institutes. In 2006 participants presented 4 plenary lectures, and 109 posters. Among others, posters covered four disciplines related to the nuclear sciences: (a) radiobiology and radiotherapy, (b) radiation chemistry and photochemistry, (c) isotopic effects in chemistry, and (d) chemical technology

  17. The 3rd Nordic Innovation Research Conference - NIR 2008—IEM Arctic Workshop

    Haapasalo, H. (Harri); Kropsu-Vehkaperä, H. (Hanna)

    2009-01-01

    Abstract The 3rd Nordic Innovation Research PhD Conference, IEM Arctic Workshop, held in December 2008 in Oulu, Finland, focuses on different aspects on Management of Innovation. The NIR 2008 is devoted to support doctoral students in their actual research work. This book is a selection of papers written by the participating PhD students from the universities of Oulu, Lappeenranta, Luleå, and also long distance co-operators from Kasetsart University, Thailand. 13 papers, presented in ...

  18. Book Review: Guide to computer forensics and investigations (3rd ed.)

    Keyu Jiang; Ruifeng Xuan

    2008-01-01

    Nelson, B., Phillips, A., Enfinger, F., & Steuart, C. (2008). Guide to computer forensics and investigations (3rd ed.). New Jersey: Pearson Education, Inc. 693 pages, ISBN: 1-4180-6733-4 (paper).Reviewed by Keyu Jiang () and Ruifeng Xuan (), Department of Information Networking and Telecommunications, Fort Hays State University, Hays, KS 67601Nelson, Phillips, Enfinger, and Steuart’s book is about the science of computer forensics and its implicatio...

  19. The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

    In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

  20. Recent advances on developing 3rd generation enzyme electrode for biosensor applications.

    Das, Priyanki; Das, Madhuri; Chinnadayyala, Somasekhar R; Singha, Irom Manoj; Goswami, Pranab

    2016-05-15

    The electrochemical biosensor with enzyme as biorecognition element is traditionally pursued as an attractive research topic owing to their high commercial perspective in healthcare and environmental sectors. The research interest on the subject is sharply increased since the beginning of 21st century primarily, due to the concomitant increase in knowledge in the field of material science. The remarkable effects of many advance materials such as, conductive polymers and nanomaterials, were acknowledged in the developing efficient 3rd generation enzyme bioelectrodes which offer superior selectivity, sensitivity, reagent less detection, and label free fabrication of biosensors. The present review article compiles the major knowledge surfaced on the subject since its inception incorporating the key review and experimental papers published during the last decade which extensively cover the development on the redox enzyme based 3rd generation electrochemical biosensors. The tenet involved in the function of these direct electrochemistry based enzyme electrodes, their characterizations and various strategies reported so far for their development such as, nanofabrication, polymer based and reconstitution approaches are elucidated. In addition, the possible challenges and the future prospects in the development of efficient biosensors following this direct electrochemistry based principle are discussed. A comparative account on the design strategies and critical performance factors involved in the 3rd generation biosensors among some selected prominent works published on the subject during last decade have also been included in a tabular form for ready reference to the readers. PMID:26735873

  1. FOREWORD: 3rd International Workshop on New Computational Methods for Inverse Problems (NCMIP 2013)

    Blanc-Féraud, Laure; Joubert, Pierre-Yves

    2013-10-01

    Conference logo This volume of Journal of Physics: Conference Series is dedicated to the scientific contributions presented during the 3rd International Workshop on New Computational Methods for Inverse Problems, NCMIP 2013 (http://www.farman.ens-cachan.fr/NCMIP_2013.html). This workshop took place at Ecole Normale Supérieure de Cachan, in Cachan, France, on 22 May 2013, at the initiative of Institut Farman. The prior editions of NCMIP also took place in Cachan, France, firstly within the scope of the ValueTools Conference, in May 2011 (http://www.ncmip.org/2011/), and secondly at the initiative of Institut Farman, in May 2012 (http://www.farman.ens-cachan.fr/NCMIP_2012.html). The NCMIP Workshop focused on recent advances in the resolution of inverse problems. Indeed inverse problems appear in numerous scientific areas such as geophysics, biological and medical imaging, material and structure characterization, electrical, mechanical and civil engineering, and finances. The resolution of inverse problems consists of estimating the parameters of the observed system or structure from data collected by an instrumental sensing or imaging device. Its success firstly requires the collection of relevant observation data. It also requires accurate models describing the physical interactions between the instrumental device and the observed system, as well as the intrinsic properties of the solution itself. Finally, it requires the design of robust, accurate and efficient inversion algorithms. Advanced sensor arrays and imaging devices provide high rate and high volume data; in this context, the efficient resolution of the inverse problem requires the joint development of new models and inversion methods, taking computational and implementation aspects into account. During this one-day workshop, researchers had the opportunity to bring to light and share new techniques and results in the field of inverse problems. The topics of the workshop were: algorithms and computational

  2. PREFACE: 3rd Italian-Pakistani Workshop on Relativistic Astrophysics (IPWRA2011)

    De Paolis, Francesco; Siddiqui, Azad A.

    2012-03-01

    The Third Italian-Pakistani Workshop on Relativistic Astrophysics was held at the Rectorate of the University of Salento in Lecce on June 20-22, 2011. It follows the first two editions of this Workshop held at the Department of Physics of the University of Salento on 20-22 June 2007 and at ICRA (International Center for Relativistic Astrophysics) in Pescara on 8-10 July 2009. The Proceedings of the first two editions of this Workshop have been published in two special issues of Nuovo Cimento B [1] and General Relativity and Gravitation [2], respectively. The workshop series, whose aim is that of discussing the different aspects (both theoretical and observational) of Relativistic Astrophysics, follows the signature, in 2006, of an agreement between the University of Salento, Italy and the National University of Sciences and Technology (NUST), Pakistan, and aims at promoting scientific and academic cooperation between the parties. The organizing committee of this Workshop has decided to dedicate the present workshop's edition to the celebration of the 65th birthday of the founder of this series of meetings, Prof. Asghar Qadir, one of the greatest Pakistani scientists of any time and a renowned world expert in the theory of general relativity. Many of the Workshop's participants have either been students or collaborators of Asghar Qadir, or both. In Pakistan the words Relativity and Asghar Qadir are synonymous. It would not be entirely wrong to say that anybody who has anything to do with relativity in Pakistan is either his student or a student of one of his students. Asghar Qadir has inspired generations of researchers and teachers, and continues to be a source of inspiration for hard work and dedication. He is a mentor of Pakistani scientists and the equivalent in Pakistan of what John Archibald Wheeler has been in the US. Qadir and Wheeler An autographed picture of John Archibald Wheeler with a young Asghar Qadir Asghar had the rare privilege of being introduced

  3. The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency. Latest Status (Spanish Edition)

    The Revised Guiding Principles and General Operating Rules to Govern the Provision of Technical Assistance by the Agency were approved by the Board of Governors on 21 February 1979. The test is reproduced herein for the information of all Members. The provisions established by the Board of Governors on 24 September 1977 for the application of safeguards in relation to the granting of technical assistance are also reproduced in the Annex to the Revised Guiding Principles and General Operating Rules.

  4. Vocational Entry-Skills for Secondary and Adult Students with Learning Disabilities. A Teacher's Guide to Implementing the ITP. Vocational Entry-Skills. Student Workbook. Revised Edition.

    Washburn, Winifred

    This updated and expanded edition of a 1-year course on how to get a job and hold it, aimed at students with learning disabilities and their teachers, includes five teaching units: (1) vocational academics (mathematics, letter writing, telephone techniques); (2) vocational resources (responding to classified advertisements in newspapers, Social…

  5. Summary of the 3rd workshop on the reduced-moderation water reactor

    Ishikawa, Nobuyuki; Nakatsuka, Tohru; Iwamura, Takamichi [eds.

    2000-06-01

    The research activities of a Reduced-Moderation Water Reactor (RMWR) are being performed for a development of the next generation water-cooled reactor. A workshop on the RMWR was held on March 3rd 2000 aiming to exchange information between JAERI and other organizations such as universities, laboratories, utilities and vendors. This report summarizes the contents of lectures and discussions on the workshop. The 1st workshop was held on March 1998 focusing on the review of the research activities and future research plan. The succeeding 2nd workshop was held on March 1999 focusing on the topics of the plutonium utilization in water-cooled reactors. The 3rd workshop was held on March 3rd 2000, which was attended by 77 participants. The workshop began with a lecture titled 'Recent Situation Related to Reduced-Moderation Water Reactor (RMWR)', followed by 'Program on MOX Fuel Utilization in Light Water Reactors' which is the mainstream scenario of plutonium utilization by utilities, and 'Feasibility Studies on Commercialized Fast Breeder Reactor Cycle System' mainly conducted by Japan Nuclear Cycle Development Institute (JNC). Also, following lectures were given as the recent research activities in JAERI: 'Progress in Design Study on Reduced-Moderation Water Reactors', 'Long-Term Scenarios of Power Reactors and Fuel Cycle Development and the Role of Reduced Moderation Water Reactors', 'Experimental and Analytical Study on Thermal Hydraulics' and Reactor Physics Experiment Plan using TCA'. At the end of the workshop, a general discussion was performed about the research and development of the RMWR. This report includes the original papers presented at the workshop and summaries of the questions and answers for each lecture and general discussion, as well as presentation viewgraphs, program and participant list as appendixes. The 7 of the presented papers are indexed individually. (J.P.N.)

  6. Directory of Adult Education Periodicals. Seventh Revised Edition. = Repertoire des Periodiques sur l'Education des Adultes. Septieme Edition Revisee. = Repertorio de Periodicos sobre Educacion de Adultos. Septima Edicion Revisada.

    United Nations Educational, Scientific, and Cultural Organization, Paris (France). Div. of Primary Educ., Literacy & Adult Educ., Educ. in Rural Areas

    Intended as a reference for persons seeking documentation on adult education, this directory provides a list of professional journals and newsletters--international, national, and regional--appearing regularly and dealing either exclusively or substantially with information and activities relating to adult education. This seventh revised edition…

  7. Evaluation of the primary 3rd grade English language teaching program through teachers’ eyes

    Çankaya, Pınar

    2016-01-01

    The present study attempts to find out active English teachers’ opinions regarding the primary 3rd grade English Language Teaching Program (ELTP) which was launched in 2013 in terms of its general overview, content,  goals, teaching-learning process and assessment dimensions in the city center of Tekirdağ including 20 primary schools with 38 teachers in the academic term 2014-2015 spring. In this evaluation study, quantitavive data were used in order to explore how teachers evaluate the prima...

  8. Virtual Visit to the ATLAS Control Room by 3rd Gymnasium in Volos

    2013-01-01

    The city of Volos, situated at the centre of the Greek mainland, will be hosting the 7th International Olympiad on Astronomy and Astrophysics this summer. In this context, and with support of PATHWAY and Discover the COSMOS projects, Volos` science education community is organising several pre-events aimed at bringing the world`s biggest experiments in science closer to students - the scientists of tomorrow. Junior high school students from the 3rd Gymnasium in Volos will have the unique opportunity to visit the ATLAS control room on 29th of March.

  9. 3rd IFToMM Symposium on Mechanism Design for Robotics

    Ceccarelli, Marco

    2015-01-01

    This volume contains the Proceedings of the 3rd IFToMM Symposium on Mechanism Design for Robotics, held in Aalborg, Denmark, 2-4 June, 2015. The book contains papers on recent advances in the design of mechanisms and their robotic applications. It treats the following topics: mechanism design, mechanics of robots, parallel manipulators, actuators and their control, linkage and industrial manipulators, innovative mechanisms/robots and their applications, among others. The book can be used by researchers and engineers in the relevant areas of mechanisms, machines and robotics.

  10. 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences

    Dinh, Tao; Nguyen, Ngoc

    2015-01-01

    This proceedings set contains 85 selected full papers presented at the 3rd International Conference on Modelling, Computation and Optimization in Information Systems and Management Sciences - MCO 2015, held on May 11–13, 2015 at Lorraine University, France. The present part I of the 2 volume set includes articles devoted to Combinatorial optimization and applications, DC programming and DCA: thirty years of Developments, Dynamic Optimization, Modelling and Optimization in financial engineering, Multiobjective programming, Numerical Optimization, Spline Approximation and Optimization, as well as Variational Principles and Applications

  11. 3rd International Symposium on Big Data and Cloud Computing Challenges

    Neelanarayanan, V

    2016-01-01

    This proceedings volume contains selected papers that were presented in the 3rd International Symposium on Big data and Cloud Computing Challenges, 2016 held at VIT University, India on March 10 and 11. New research issues, challenges and opportunities shaping the future agenda in the field of Big Data and Cloud Computing are identified and presented throughout the book, which is intended for researchers, scholars, students, software developers and practitioners working at the forefront in their field. This book acts as a platform for exchanging ideas, setting questions for discussion, and sharing the experience in Big Data and Cloud Computing domain.

  12. Proceedings of the 3rd NINS symposium on engineering and technology

    The 3rd NINS Symposium on Engineering and Technology was held on 24-25, July 2008 at National Institute for Fusion Science (NIFS), organized by Department of Engineering and Technical Services, NIFS. This Symposium is continuation of an annual series. The 1st one was held on 25-26 July, 2006 organized by National Astronomical Observatory of Japan. The 2nd one was held on 25-26 June, 2007 organized by Institute for Molecular Science. This proceedings is a compilation of papers presented at the symposium. 49 participants from 5 institutes of NINS attended this symposium and 23 papers were presented. (author)

  13. Preface to Special Topic: Invited Papers of the 3rd International Conference on Ultrafast Structural Dynamics

    S. L. Johnson

    2016-03-01

    Full Text Available The ability to visualize the real-time dynamics of atomic, magnetic, and electronic structure is widely recognized in many fields as a key element underpinning many important processes in chemistry, materials science, and biology. The need for an improved understanding of such processes becomes acute as energy conversion processes on fast time scales become increasingly relevant to problems in science and technology. This special issue, containing invited papers from participants at the 3rd International Conference on Ultrafast Structural Dynamics held June 10–12, 2015 in Zurich, Switzerland, discusses several recent developments in this area.

  14. 3rd International Conference on Computer Science, Applied Mathematics and Applications

    Nguyen, Ngoc; Do, Tien

    2015-01-01

    This volume contains the extended versions of papers presented at the 3rd International Conference on Computer Science, Applied Mathematics and Applications (ICCSAMA 2015) held on 11-13 May, 2015 in Metz, France. The book contains 5 parts: 1. Mathematical programming and optimization: theory, methods and software, Operational research and decision making, Machine learning, data security, and bioinformatics, Knowledge information system, Software engineering. All chapters in the book discuss theoretical and algorithmic as well as practical issues connected with computation methods & optimization methods for knowledge engineering and machine learning techniques.  

  15. Design of a 3rd order micro power switched current ΣΔ-modulator

    Jørgensen, Ivan Harald Holger; Bogason, Gudmundur

    1996-01-01

    This paper reports the design of a 3rd order switched current-ΣΔ-modulator. The modulator is design to have a SNR of 80 dB with a signal bandwidth of fb=6 kHz. The oversampling ratio is R=90 and the sampling frequency fs=1.08 MHz. Multiple input signals are used to reduce the internal signal swings...... supply voltage is VDD=2.7 V. A new methology is presented that allows for optimization of SI circuits for minimum power consumption with respect to process tolerances...

  16. Preface to Special Topic: Invited Papers of the 3rd International Conference on Ultrafast Structural Dynamics.

    Johnson, S L

    2016-03-01

    The ability to visualize the real-time dynamics of atomic, magnetic, and electronic structure is widely recognized in many fields as a key element underpinning many important processes in chemistry, materials science, and biology. The need for an improved understanding of such processes becomes acute as energy conversion processes on fast time scales become increasingly relevant to problems in science and technology. This special issue, containing invited papers from participants at the 3rd International Conference on Ultrafast Structural Dynamics held June 10-12, 2015 in Zurich, Switzerland, discusses several recent developments in this area. PMID:27191008

  17. 《八思巴字与元代汉语》增订本评介%Book Review: Phagspa Script and the Chinese Language in the Yuan Period in Revised and Enlarged Edition

    尚朴斋

    2005-01-01

    Among the handed-down and archaeologically discovered documents, there are lots of Phagspa-script historical sources translated from Chinese, which provide a great amount of valuable information for studying the history of the Yuan Dynasty. As this script was abandoned and became unknown long ago, the use of these literal data calls, first of all, for its correct decipherment. The Phagspa Script and the Chinese Language in the Yuan Period, first published in 1958, is the fundamental work in this field. Its revised and enlarged edition coming out in 2004 supplements a large amount of new content, collects firsthand referential documents and previous phonological research results, and furnishes a retrievable glossary. Its accomplishments have important value to historical, philological and archaeological studies.

  18. Detection and clinical evolution of scrapie in sheep by 3rd eyelid biopsy.

    Vargas, Francisco; Luján, Lluís; Bolea, Rosa; Monleón, Eva; Martín-Burriel, Inmaculada; Fernández, Antonio; De Blas, Ignacio; Badiola, Juan José

    2006-01-01

    The goal of this article was to characterize the clinical evolution of scrapie in naturally affected sheep. Eighteen sheep with scrapie diagnosed by examination of 3rd eyelid biopsy and 12 control ewes were studied throughout the duration of their disease. Diagnosis was confirmed postmortem by histopathologic, immunohistochemical, and Western blot analysis of nervous tissue. Complete clinical examinations were performed every 2 weeks for each animal, of which 3 clinical examinations per animal are reported. Those clinical signs that showed a significant frequency within the corresponding clinical examination were considered representative of each stage of the disease (ie, early, middle, and late). The representative clinical signs for the early stage were hypoesthesia in the limbs, alteration of mental status, and a body condition score gait abnormalities, and teeth grinding. On the basis of these results, we propose the calculation of an objective clinical index that allows the differentiation among clinical stages and that could be useful for further studies. The usefulness of 3rd eyelid lymphoid tissue biopsies for sequential clinical studies in naturally scrapie-affected sheep is demonstrated. PMID:16496940

  19. Key Success Factors of 3rd Generation Mobile Network Services for M-Commerce in Malaysia

    Saravanan Muthaiyah

    2004-01-01

    Full Text Available While there has been a great deal of excitement in view of M-commerce, very little is actually known about conditions and critical success factors for successful introduction of the 3rd generation mobile network services here in Malaysia. This study investigates the factors for successful diffusion of 3G network services and their role in advancing an interactive marketplace. 3G which simply means 3rd generation mobile communications technology has been widely discussed by many telecommunications service providers. It was launched by the International Telecommunication Union (ITU some 13 years ago. 3G is viewed as an enabler of M-Commerce here in Malaysia. However, true success of this technology depends on various factors. The objective of this study is to investigate significant key enablers of 3G deployment and adoption in Malaysia. An insight into the critical factors to be considered for the deployment of 3G technology in Malaysia and experiences of other countries will be used as a benchmark to understand the mitigating factors of 3G deployment. Critical factors such as cost to of service, interoperability of standards, insufficiency of mobile services or content and deficiency of the laws will be discussed in this study. The study also discusses diffusion barriers and drivers for the rapid service diffusion of 3G mobile networks.

  20. Proceedings of the 3rd Workshop of R and D and technologies on Radioactive Waste management. Vol. 1,2

    The sessions present at the 3rd workshops on radioactive waste management are: 1. Bases for the radioactive waste management 2. Capsule fuel barrier 3. Barriers for engineering 4. Geologic barriers 5. The biosphere as barrier

  1. Passive solar progress: a simplified guide to the 3rd national passive solar conference

    Miller, H.; Howell, Y.; Richards, D.

    1980-10-01

    Some of the concepts and practices that have come to be known as passive solar heating and cooling are introduced, and a current picture of the field is presented. Much of the material presented is derived from papers given at the 3rd National Passive Solar Conference held in San Jose, California in January 1979 and sponsored by the US Department of Energy. Extracts and data from these papers have been integrated in the text with explanatory and descriptive material. In this way, it is attempted to present technical information in an introductory context. Topics include design considerations, passive and hybrid systems and applications, sizing methods and performance prediction, and implementation issues. A glossary is included. (WHK)

  2. The relationship between component skills, reading experience, and reading comprehension in Danish 3rd graders

    Rønberg, Louise Flensted-Jensen; Petersen, Dorthe Klint

    majority simultaneous phonological and orthographic coding difficulties were found as well. Conclusions The results suggest that access to semantic structuring of lexical items play an important role in reading comprehension abilities for the entire group of 3rd graders. However, for those with poor......Purpose The main aim of this study was to investigate the contribution of aspects of vocabulary, word reading abilities, and reading experience to reading comprehension, and to analyse sub-samples of students with comprehension difficulties. Method The study employed a cross-sectional design. Full...... data sets were obtained from 179 Danish Grade 3 pupils. Participants were given a standard reading comprehension test requiring multiple-choice answers to six different texts of various length and type. Orthographic and phonological coding, as well as non-verbal problem solving were assessed by means...

  3. 3rd International Summer School Nanotechnology : From Fundamental Research to Innovations

    Yatsenko, Leonid

    2015-01-01

    This book highlights the most recent advances in nanoscience from leading researchers in Ukraine, Europe, and beyond.  It features contributions from participants of the 3rd International Summer School “Nanotechnology: From Fundamental Research to Innovations,” held in Yaremche, Ukraine on August 23-26, 2014 and of the 2nd International NANO-2014 Conference, held in Lviv, Ukraine on August 27-30, 2014.  These events took place within the framework of the European Commission FP7 project Nanotwinning, and were organized jointly by the Institute of Physics of the National Academy of Sciences of Ukraine, University of Tartu (Estonia), University of Turin (Italy), and Pierre and Marie Curie University (France).  Internationally recognized experts from a wide range of universities and research institutions share their knowledge and key results in the areas of nanocomposites and nanomaterials, nanostructured surfaces, microscopy of nano-objects, nano-optics and nanophotonics, nanoplasmonics, nanochemistry, na...

  4. Virtual Visit to the ATLAS Control Room by 1st and 3rd Lyceums in Chios

    2013-01-01

    High school students from the 1st and 3rd Lyceums of Chios, Greece, will be visiting the control room of ATLAS to discuss the latest results on the Higgs search, LHC’s first long shutdown and what the future holds for the ATLAS experiment. This visit takes place in the context of a Masterclass where students will learn how to analyse real events from the LHC with the use of the HYPATIA online applet based on educational scenarios from the Discover the COSMOS portal. This full-day activity is organized by the University of Athens, the University of the Aegean, Ellinogermaniki Agogi and the Chios Physical Society in the framework of the Open Discovery Space EU project.

  5. Proceedings of the 3rd international symposium on material chemistry in nuclear environment (MATERIAL CHEMISTRY '02)

    The volume contains all presented papers during the 3rd International Symposium on Material Chemistry in Nuclear Environment: MATERIAL CHEMISTRY 02 (MC'02), held March 13-15, 2002. The purpose of this symposium is to provide an international forum for the discussion of recent progress in the field of materials chemistry in nuclear environments. This symposium intends to build on the success of the previous symposiums held in Tsukuba in 1992 and 1996. The topics discussed in the symposium MC'02 are Chemical Reaction and Thermodynamics, Degradation Phenomena, New Characterization Technology, Fabrication and New Materials, Composite Materials, Surface Modification, and Computational Science. The 61 of the presented papers are indexed individually. (J.P.N.)

  6. 3rd International Conference on Modelling and Management of Engineering Processes

    Gericke, Kilian; Szélig, Nikoletta; Vajna, Sándor

    2015-01-01

    Innovative processes for the development of products and services are more and more considered as an organisational capability, which is recognised to be increasingly important for business success in today’s competitive environment. However, management and academia need a more profound understanding of these processes in order to develop improved management approaches to exploit business potentials. This book contains the proceedings of the 3rd International Conference on Modelling and Management of Engineering Processes (MMEP2013) held in Magdeburg, Germany, in November 2013. It includes contributions from international leading researchers in the fields of process modelling and process management. The conference topics were recent trends in modelling and management of engineering processes, potential synergies between different modelling approaches, future challenges for the management of engineering processes as well as future research in these areas.

  7. The Perception of Entrepreneurial and 3rd Generation University in Turkey

    Deniz Zungun

    2016-07-01

    Full Text Available Increased competition caused by globalization has led to philosophical changes in private and public businesses. This situation has affected educational institutions and they have needed dynamic, innovator and transformational tools in order to survive in competitive environment. The universities defined as �3rd Generation Universities� need commercialization, network among universities, close co-operation among institutions and entrepreneurship as well as intellectual and innovative changes. In this regard, the aim of the research is formed by the analysis of �Entrepreneur University� concept from the perspective of the academicians that served at managerial positions at the universities in Turkey. The research is limited to the opinions of the academicians that served at top, middle and lower management at randomly chosen 20 universities.

  8. 3rd Sino-German Conference “Underground Storage of CO2 and Energy”

    Xie, Heping; Were, Patrick

    2013-01-01

    Anthropogenic greenhouse gas emissions, energy security and sustainability are three of the greatest contemporary global challenges today. This year the Sino-German Cooperation Group “Underground Storage of CO2 and Energy”, is meeting on the 21-23 May 2013 for the second time in Goslar, Germany, to convene its 3rd Sino-German conference on the theme “Clean Energy Systems in the Subsurface: Production, Storage and Conversion”.   This volume is a collection of diverse quality scientific works from different perspectives elucidating on the current developments in CO2 geologic sequestration research to reduce greenhouse emissions including measures to monitor surface leakage, groundwater quality and the integrity of caprock, while ensuring a sufficient supply of clean energy. The contributions herein have been structured into 6 major thematic research themes: Integrated Energy and Environmental Utilization of Geo-reservoirs: Law, Risk Management & Monitoring CO2 for Enhanced Gas and Oil Recovery, Coa...

  9. Highlights of the 3rd International Conference on High Pressure Bioscience and Biotechnology

    J.A. Mignaco

    2005-08-01

    Full Text Available The 3rd International Conference on High Pressure Bioscience and Biotechnology was held in the city of Rio de Janeiro from September 27 to September 30, 2004. The meeting, promoted by the International Association of High Pressure Bioscience and Biotechnology (IAHPBB, congregated top scientists and researchers from all over the world. In common, they shared the use of hydrostatic pressure for research, technical development, or industrial applications. The meeting consisted of invited lectures, contributed papers and a well-attended poster session. Very exciting discussions were held inside and outside the sessions, and the goals of discussing state-of-the-art data and establishing working collaborations and co-operations were fully attained.

  10. Proceedings of the 3rd workshop on Wendelstein VII-X

    This report presents the major part of the information given at the 3rd Workshop on Wendelstein VII-X, held at Schloss Ringberg near Lake Tegernsee, 26-30 June 1989. A number of 9 papers by members of the INTERATOM study group has been summarized. The ongoing work of the development of W VII-X is concentrated on a small number of Helias configurations with five field periods, in order to define their coil systems and the attainable parameter range. This effort aims at a simultaneous realization of the desired numbers of plasma aspect ratio, stability-β, transport, improvement in bootstrap current, etc., in order to arrive at a 'reference configuration' for this experiment. (orig.)

  11. Nonlinear Dynamics of Memristor Based 2nd and 3rd Order Oscillators

    Talukdar, Abdul Hafiz

    2011-05-01

    Exceptional behaviours of Memristor are illustrated in Memristor based second order (Wien oscillator) and third order (phase shift oscillator) oscillator systems in this Thesis. Conventional concepts about sustained oscillation have been argued by demonstrating the possibility of sustained oscillation with oscillating resistance and dynamic poles. Mathematical models are also proposed for analysis and simulations have been presented to support the surprising characteristics of the Memristor based oscillator systems. This thesis also describes a comparative study among the Wien family oscillators with one Memristor. In case of phase shift oscillator, one Memristor and three Memristors systems are illustrated and compared to generalize the nonlinear dynamics observed for both 2nd order and 3rd order system. Detail explanations are provided with analytical models to simplify the unconventional properties of Memristor based oscillatory systems.

  12. 3rd international KES conference on Smart Education and Smart e-Learning

    Howlett, Robert; Jain, Lakhmi

    2016-01-01

    This book contains the contributions presented at the 3rd international KES conference on Smart Education and Smart e-Learning, which took place in Puerto de la Cruz, Tenerife, Spain, June 15-17, 2016. It contains a total of 56 peer-reviewed book chapters that are grouped into several parts: Part 1 - Smart University: Conceptual Modeling, Part 2 – Smart Education: Research and Case Studies, Part 3 – Smart e-Learning, Part 4 – Smart Education: Software and Hardware Systems, and Part 5 – Smart Technology as a Resource to Improve Education and Professional Training. We believe that the book will serve as a useful source of research data and valuable information for faculty, scholars, Ph.D. students, administrators, and practitioners - those who are interested in innovative areas of smart education and smart e-learning. .

  13. Analysis of coherence properties of 3-rd generation synchrotron sources and free-electron lasers

    A general theoretical approach based on the results of statistical optics is used for the analysis of the transverse coherence properties of 3-rd generation synchrotron sources and X-ray free-electron lasers (XFEL). Correlation properties of the wave elds are calculated at different distances from an equivalent Gaussian Schell-model source. This model is used to describe coherence properties of the five meter undulator source at the synchrotron storage ring PETRA III. In the case of XFEL sources the decomposition of the statistical fields into a sum of independently propagating transverse modes is used for the analysis of the coherence properties of these new sources. A detailed calculation is performed for the parameters of the SASE1 undulator at the European XFEL. It is demonstrated that only a few modes contribute significantly to the total radiation field of that source. (orig.)

  14. 3rd International Asia Conference on Informatics in Control, Automation and Robotics

    Informatics in Control, Automation and Robotics

    2012-01-01

    Session 2 includes 110 papers selected from 2011 3rd International Asia Conference on Informatics in Control, Automation and Robotics (CAR 2011), held on December 24-25, 2011, Shenzhen, China.   As we all know, the ever growing technology in robotics and automation will help build a better human society. This session will provide a unique opportunity for the academic and industrial communities to address new challenges, share solutions, and discuss research directions for the future. Robotics research emphasizes intelligence and adaptability to cope with unstructured environments. Automation research emphasizes efficiency, productivity, quality, and reliability, focusing on systems that operate autonomously. The main focus of this session is on the autonomous acquisition of semantic information in intelligent robots and systems, as well as the use of semantic knowledge to guide further acquisition of information.

  15. Proceedings of the 3rd seminar of R and D on advanced ORIENT (International)

    The 3rd Seminar of R and D on advanced ORIENT (International) was held at Tohoku University, on October 30th, 2009 organized by Japan Atomic Energy Agency. The first meeting of this seminar was held at Oarai, Ibaraki on May, 2007, and the second seminar was held at Tokai, Ibaraki on November, 2008. This seminar has the world-wide concept and includes the main topics from foreign researchers. Spent nuclear fuel should be recognized not only mass of radioactive elements but also potentially useful materials including platinum metals and rare earth elements. Taking the cooperation with universities related companies and research institutes, into consideration, we aimed at expanding and progressing the basic researches. This report records abstracts and figures submitted from the oral speakers in this seminar. (author)

  16. Strengthening Family Resilience, Second Edition

    Walsh, Froma

    2006-01-01

    In a fully revised, updated, and expanded second edition, this informative clinical resource and text presents Froma Walsh's family resilience framework for intervention and prevention with clients dealing with adversity. Drawing on extensive research and clinical experience, the author describes key processes in resilience for practitioners to…

  17. The Structure of Diagnostic and Statistical Manual of Mental Disorders (4th Edition, Text Revision) Personality Disorder Symptoms in a Large National Sample

    Trull, Timothy J.; Vergés, Alvaro; Wood, Phillip K.; Jahng, Seungmin; Sher, Kenneth J.

    2012-01-01

    We examined the latent structure underlying the criteria for DSM–IV–TR (American Psychiatric Association, 2000, Diagnostic and statistical manual of mental disorders (4th ed., text revision). Washington, DC: Author.) personality disorders in a large nationally representative sample of U.S. adults. Personality disorder symptom data were collected using a structured diagnostic interview from approximately 35,000 adults assessed over two waves of data collection in the National Epidemiologic Sur...

  18. Environmental impact data for fuels. Part 2: Background information and technical appendix (New revised edition); Miljoefaktabok foer braenslen. Del 2: Bakgrundsinformation och Teknisk bilaga (Ny reviderad upplaga)

    Uppenberg, S.; Almemark, M.; Brandel, M.; Lindfors, L.G.; Marcus, H.O.; Stripple, H.; Wachtmeister, A.; Zetterberg, L.

    2001-05-01

    This report is a compilation of data concerning environmental impacts from the utilization of different fuels. The entire life cycle is studied, from the extraction of raw materials to combustion. The fuels under study are gasoline, gasoline with MTBE, diesel, fuel oil, LPG, coal, natural gas, peat, refuse, ethanol, RME, DME, methane and wood fuels (forestry residues, Salix, pellets/briquettes). Utilization areas studied are heating plants, cogeneration plants, power plants, domestic boilers, and light and heavy vehicles. In this new edition, the following changes were made: New life cycle analyses have been included, a few new fuels added, electricity from hydroelectric plants, wind power plants and nuclear power plants have been included and some other minor changes.

  19. Environmental impact data for fuels. Part 1: Main report. Resource consumption and emissions from the entire life cycle (New revised edition)

    This report is a compilation of data concerning environmental impacts from the utilization of different fuels. The entire life cycle is studied, from the extraction of raw materials to combustion. The fuels under study are gasoline, gasoline with MTBE, diesel, fuel oil, LPG, coal, natural gas, peat, refuse, ethanol, RME, DME, methane and wood fuels (forestry residues, Salix, pellets/briquettes). Utilization areas studied are heating plants, cogeneration plants, power plants, domestic boilers, and light and heavy vehicles. In this new edition, the following changes were made: New life cycle analyses have been included, a few new fuels added, electricity from hydroelectric plants, wind power plants and nuclear power plants have been included and some other minor changes

  20. Results of the 3rd regular inspection of Unit 2 in Hamaoka Nuclear Power Station

    The 3rd regular inspection of Unit 2 in the Hamaoka Nuclear Power Station in fiscal 1981 was carried out from October 14, 1981, to February 17, 1982. Inspection was made on the reactor proper, reactor cooling system, instrumentation and control system, waste management, reactor containment, etc. By visual, disassembling, leakage, functional, performance and other inspections, the results were as follows. (1) Cracks were detected in the impeller of a control rod-driving water pump. The main shaft and impeller were replaced. (2) During adjustment operation, nitrogen gas leaked in the containment vessel from the diaphragm of an air-operated valve in the vessel. The diaphragm was replaced. Radiation exposure dose during the inspection was all below the permissible level. During the regular inspection, the following improvement works and others were done: new installation of the trip for a reactor recirculation pump, and the replacement of the control rod-driving mechanism, power range instrumentation and the small diameter piping for a steam-engine. (Mori, K.)

  1. SESAME-A 3rd Generation Synchrotron Light Source for the Middle East

    Winick, Herman

    2010-02-01

    Developed under the auspices of UNESCO and modeled on CERN, SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) is an international research center in construction in Jordan. It will enable world class research by scientists from the region, reversing the brain drain. It will also build bridges between diverse societies, contributing to a culture of peace through international cooperation in science. The centerpiece is a synchrotron light source originating from BESSY I, a gift by Germany. The upgraded machine, a 2.5 GeV 3rd Generation Light Source (133m circumference, 26nm-rad emittance and 12 places for insertion devices), will provide light from infra-red to hard X-rays, offering excellent opportunities to train local scientists and attract those working abroad to return. The SESAME Council meets twice each year and presently has nine Members (Bahrain, Cyprus, Egypt, Iran, Israel, Jordan, Pakistan, Palestinian Authority, Turkey). Members have responsibility for the project and provide the annual operations budget (1.5M US dollars in 2009, expected to rise to about 5M when operation starts in 2012-13). Jordan provided the site, building, and infrastructure. A staff of 20 is installing the 0.8 GeV BESSY I injection system. The facility will have the capacity to serve 30 or more experiments operating simultaneously. See www.sesame.org.jo )

  2. Report from the 3rd AIDS Impact Conference: culture, community, empowerment.

    Aggleton, P

    1997-10-01

    Presentations made at the 3rd AIDS Impact Conferences in June 1997 in Melbourne, Australia are summarized. The presentations focused on the importance of local beliefs, practices, and sexual cultures as factors that impact HIV risk. The three dominant themes of this conference were a concern for community, an emphasis on culture, and empowerment for the most vulnerable groups. Speakers illustrated the importance of culture as a factor in the form, context, and meaning of sex among young men and women in Thailand, Australia, Italy, Cambodia, and the United States. Studies conducted in correctional facilities illustrate how the culture of sex and substance use can intensify the HIV risk. Papers examined the sexual revolution in China and the experiences of indigenous people in Brazil, Australia, and New Zealand. The presentations also highlighted drug use cultures among gay men in Australian and German cities and introduced new research methodologies for the analysis of these processes and issues. The closing presentation considered the politics of HIV and their relationship to national and international processes of negative societal responses to HIV diseases. PMID:11364796

  3. SESAME, A 3rd Generation Synchrotron Light Source for the Middle East

    Developed under the auspices of UNESCO, SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be a major international research centre in the Middle East and Mediterranean region. On 6th of January 2003, the official foundation of SESAME took place. The facility is located in Allan, Jordan, 30 km North-West of Amman. As of August 2003 the Founding Members are Bahrain, Egypt, Iran, Israel, Jordan, Pakistan, Palestine, Turkey and United Arabic Emirates, representing a population of over 300 million. SESAME will be a 2.5 GeV 3rd Generation light source (emittance 24.6 nm.rad, circumference ∼125m). About 40% of the circumference is available for insertion devices (average length 2.75m) in 13 straight sections. Beam lines are up to 36m. The site and a building are provided by Jordan. Construction started in August 2003. The scientific program will start with up to 6 beam lines: MAD Protein Crystallography, SAXS and WAXS for polymers and proteins, Powder Diffraction for material science, UV/VUV/SXR Photoelectron Spectroscopy and Photoabsorption Spectroscopy, IR Spectroscopy, and EXAFS

  4. China Satellite Navigation Conference (CSNC) 2012 Proceedings : The 3rd China Satellite Navigation Conference

    Liu, Jingnan; Yang, Yuanxi; Fan, Shiwei

    2012-01-01

    Proceedings of the 3rd China Satellite Navigation Conference (CSNC2012) presents selected research papers from CSNC2012, held on 15-19 May in Guanzhou, China. These papers discuss the technologies and applications of the Global Navigation Satellite System (GNSS), and the latest progress made in the China BeiDou system especially. They are divided into 9 topics to match the corresponding sessions in CSNC2012, which broadly covered key topics in GNSS. Readers can learn about the BeiDou system and keep abreast of the latest advances in GNSS techniques and applications. SUN Jiadong is the Chief Designer of the Compass/BeiDou system, and the Academician of Chinese Academy of Sciences; LIU Jingnan is a professor at Wuhan University, and the Academician of Chinese Academy of Engineering; YANG Yuanxi is a professor at China National Administration of GNSS and Applications, and the Academician of Chinese Academy of Sciences; FAN Shiwei öis a researcher on satellite navigation.

  5. PREFACE: 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015)

    Lumban Gaol, Ford; Webb, Jeff; Ding, Jun

    2015-05-01

    The 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015) was held at the Sheraton Kuta, Bali, Indonesia, from 28 - 29 March 2015. The MOIME 2015 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program, as well as the invited and plenary speakers. This year, we received 99 papers and after rigorous review, 24 papers were accepted. The participants come from eight countries. There were four parallel sessions and two invited speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2015. The Editors of the MOIME 2015 Proceedings Dr. Ford Lumban Gaol Jeff Webb, Ph.D Prof. Jun DING, Ph.D

  6. Regional apparent diffusion coefficient values in 3rd trimester fetal brain

    Hoffmann, Chen [Tel Aviv University, Department of Radiology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Sheba Medical Center, Diagnostic Imaging, 52621, Tel Hashomer (Israel); Weisz, Boaz; Lipitz, Shlomo; Katorza, Eldad [Tel Aviv University, Department of Obstetrics and Gynecology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Yaniv, Gal; Bergman, Dafi [Tel Aviv University, Department of Radiology, Sheba Medical Center, Tel Hashomer (affiliated to the Sackler School of Medicine), Tel Aviv (Israel); Biegon, Anat [Stony Brook University School of Medicine, Department of Neurology, Stony Brook, NY (United States)

    2014-07-15

    Apparent diffusion coefficient (ADC) values in the developing fetus can be used in the diagnosis and prognosis of prenatal brain pathologies. To this end, we measured regional ADC in a relatively large cohort of normal fetal brains in utero. Diffusion-weighted imaging (DWI) was performed in 48 non-sedated 3rd trimester fetuses with normal structural MR imaging results. ADC was measured in white matter (frontal, parietal, temporal, and occipital lobes), basal ganglia, thalamus, pons, and cerebellum. Regional ADC values were compared by one-way ANOVA with gestational age as covariate. Regression analysis was used to examine gestational age-related changes in regional ADC. Four other cases of CMV infection were also examined. Median gestational age was 32 weeks (range, 26-33 weeks). There was a highly significant effect of region on ADC, whereby ADC values were highest in white matter, with significantly lower values in basal ganglia and cerebellum and the lowest values in thalamus and pons. ADC did not significantly change with gestational age in any of the regions tested. In the four cases with fetal CMV infection, ADC value was associated with a global decrease. ADC values in normal fetal brain are relatively stable during the third trimester, show consistent regional variation, and can make an important contribution to the early diagnosis and possibly prognosis of fetal brain pathologies. (orig.)

  7. The 3^rd International Conference on Women in Physics: Global Perspectives, Common Concerns, Worldwide Views

    Zastavker, Yevgeniya V.

    2009-03-01

    The 3^rd International Conference on Women in Physics (ICWIP), held in Seoul, Korea, in October 2008, brought together 300 participants from 57 countries, including a diverse 22-member U.S. Delegation, for a 3-day summit of stimulating discussions, thought-provoking presentations, inspirational posters, and networking. Held under the auspices of the Working Group on Women in Physics of the International Union of Pure and Applied Physics (IUPAP), this meeting built on the successes of the 1^st (Paris, 2002) and 2^nd (Rio de Janeiro, 2005) Conferences and further clarified the importance of diversifying the field of physics worldwide. Although considerable progress has been made since 2002, it was clear that the global scientific workforce is still under-utilizing a large percentage of the available female talent pool. If human society is to benefit to its fullest from various contributions that the field of physics can offer in addressing global issues of economic crisis, energy, environment, water, health, poverty, and hunger, women of all races and nationalities need to become fully included and engaged in the national and international physical community. To address these and many other issues, the ICWIP unanimously approved a five-part resolution to IUPAP recommending actions to promote the recruitment, retention, and advancement of women in physics and related fields.

  8. Visual, Critical, and Scientific Thinking Dispositions in a 3rd Grade Science Classroom

    Foss, Stacy

    Many American students leave school without the required 21st century critical thinking skills. This qualitative case study, based on the theoretical concepts of Facione, Arheim, and Vygotsky, explored the development of thinking dispositions through the arts in science on the development of scientific thinking skills when used as a conceptual thinking routine in a rural 3rd grade classroom. Research questions examined the disposition to think critically through the arts in science and focused on the perceptions and experiences of 25 students with the Visual Thinking Strategy (VTS) process. Data were collected from classroom observations (n = 10), student interviews (n = 25), teacher interviews ( n = 1), a focus group discussion (n = 3), and artifacts of student work (n = 25); these data included perceptions of VTS, school culture, and classroom characteristics. An inductive analysis of qualitative data resulted in several emergent themes regarding disposition development and students generating questions while increasing affective motivation. The most prevalent dispositions were open-mindedness, the truth-seeking disposition, the analytical disposition, and the systematicity disposition. The findings about the teachers indicated that VTS questions in science supported "gradual release of responsibility", the internalization of process skills and vocabulary, and argumentation. This case study offers descriptive research that links visual arts inquiry and the development of critical thinking dispositions in science at the elementary level. A science curriculum could be developed, that emphasizes the development of thinking dispositions through the arts in science, which in turn, could impact the professional development of teachers and learning outcomes for students.

  9. Recent developments at 3rd generation storage ring light sources (2/4)

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  10. Recent developments at 3rd generation storage ring light sources (1/4)

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  11. Recent developments at 3rd generation storage ring light sources (4/4)

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  12. Recent developments at 3rd generation storage ring light sources (3/4)

    CERN. Geneva

    2009-01-01

    Over the last decade, many 3rd generation storage ring light sources have been built and put into operation. Progressively, significant improvements have been brought to the machine performances and experiences developed at the first facilities have benefited to the most recently built ones. Most of the recent facilities are now featuring small emittances, high current together with high position stability. The small sizes of the electron beam at the source points impose achieving position stabilities in the sub micron range. The technology to build the insertion devices that produce the photon beams has reached a very mature state and enables 3 GeV medium energy /medium size machines to produce high brilliance beams up to the hard X-Ray range (10 - 30 keV). The designing of the optical set-up of a beamline includes now the choice of the best suited undulator. All these facilities are operated as “photon factories” and deliver their beams to many beamlines over several thousands hours per year. Some re...

  13. The 2001 activities and the 3rd workshop of the human resources development project in FNCA

    In 1999, the Project for Human Resources Development (HRD) was initiated as defined in the framework of the Forum for Nuclear Cooperation in Asia (FNCA), organized by the Atomic Energy Commission of Japan. The objective of the HRD Project is to solidify the foundation of technologies for nuclear development and utilization in Asia by promoting human resources development in Asian countries. In the Project are two kinds of activity; In-workshop activity and Outside-of-workshop activity. The 3rd Workshop on Human Resources Development in the Nuclear Field was held on October 29 to November 1, at the Nuclear Training Center of KAERI. Participating countries were China, Indonesia, Republic of Korea, Japan, Malaysia, the Philippines, Thailand, and Vietnam. The secretariat for the Human Resources Development Project is provided by the Nuclear Training Center of the Korea Atomic Energy Research Institute and the Nuclear Technology and Education Center of the Japan Atomic Energy Research Institute. This report consists of presentation papers and materials at the Workshop as In-Workshop Activity, a document of project review on Human Resources Development for the fourth Coordinators Meeting of FNCA at Tokyo on March, 2002, a letter of proposal from the Project Leader of Japan to the project leaders of the participating countries, and training materials of participating countries as Outside-Workshop Activity. (author)

  14. Proceedings of the 3rd topical meeting on FEL and high power radiation

    The meeting was held on June 10 and 11, 1993, at the National Laboratory for High Energy Physics. This is the joint study meeting with 31st large power microwave-milliwave study meeting. At the meeting, lectures were given on the report of 1st Asia FEL study meeting, infrared free electron laser (FEL) project in JAERI, present state of Free Electron Laser Research Institute Inc., infrared FEL experiment in the Institute of Scientific and Industrial Research, Osaka University, FEL experiment in UVSOR storage ring, NIJI-4 SRFEL, simulation of FEL oscillation in photo-klystron, vacuum UVFEL in PF, beam characteristics of small photon storage ring, micro-cherenkov FEL using field emission array, coherent spontaneous emission and radiation build-up in FEL oscillator, stability of soft X-ray multilayers under exposure to multipole Wigger radiation, long life Zn2 excimer excited with relativistic electron beam, development of large power klystron in KEK, design of 1 THz gyrotron and first experiment, experiment of relativistic peniotron, experiments of 3rd and 10th cyclotron harmonic peniotron oscillators and others. (K.I.)

  15. The 3rd ATLAS Domestic Standard Problem for Improvement of Safety Analysis Technology

    The third ATLAS DSP (domestic standard problem exercise) was launched at the end of 2012 in response to the strong need for continuation of the ATLAS DSP. A guillotine break of a main steam line without LOOP at a zero power condition was selected as a target scenario, and it was successfully completed in the beginning of 2014. In the 3rd ATLAS DSP, comprehensive utilization of the integral effect test data was made by dividing analysis with three topics; 1. scale-up where extrapolation of ATLAS IET data was investigated 2. 3D analysis where how much improvement can be obtained by 3D modeling was studied 3. 1D sensitivity analysis where the key phenomena affecting the SLB simulation were identified and the best modeling guideline was achieved. Through such DSP exercises, it has been possible to effectively utilize high-quality ATLAS experimental data of to enhance thermal-hydraulic understanding and to validate the safety analysis codes. A strong human network and technical expertise sharing among the various nuclear experts are also important outcomes from this program

  16. A 3rd Order WENO GLM-MHD Scheme for Magnetic Reconnection

    FENG Xueshang; ZHOU Yufen; HU Yanqi

    2006-01-01

    A new numerical scheme of 3rd order Weighted Essentially Non-Oscillatory (WENO)type for 2.5D mixed GLM-MHD in Cartesian coordinates is proposed. The MHD equations are modified by combining the arguments as by Dellar and Dedner et al to couple the divergence constraint with the evolution equations using a Generalized Lagrange Multiplier (GLM). Moreover, the magnetohydrodynamic part of the GLM-MHD system is still in conservation form. Meanwhile, this method is very easy to add to an existing code since the underlying MHD solver does not have to be modified. To show the validation and capacity of its application to MHD problem modelling,interaction between a magnetosonic shock and a denser cloud and magnetic reconnection problems are used to verify this new MHD code. The numerical tests for 2D Orszag and Tang's MHD vortex,interaction between a magnetosonic shock and a denser cloud and magnetic reconnection problems show that the third order WENO MHD solvers are robust and yield reliable results by the new mixed GLM or the mixed EGLM correction here even if it can not be shown that how the divergence errors are transported as well as damped as done for one dimensional ideal MHD by Dedner et al.

  17. New half-film method for measuring Al2O3 film MTF of 3rd generation image intensifier

    Cheng, Yaojin; Shi, Feng; Bai, Xiaofeng; Zhu, Yufeng; Yan, Lei; Liu, Feng; Li, Min

    2012-10-01

    In 3rd generation image intensifier, Al2O3 film on the input of MCP is a serious influence factor on device MTF due to its electron scattering process. There are no reportes about how to measure the MTF of Al2O3 film. In this paper a new Half-film comparssion test method is creatively established for determing the film MTF, which overcomes the difficulty of measuring super thin film less than a few nm. In this way, the MTF curves of 10nm Al2O3 film can be accurately obtained. The measurement results show that 10nm Al2O3 film obviously decay the MTF performance of the 3rd generation image intensifier and take an important role in the improvement work of 3rd generation image intensifier MTF and resolution performances.

  18. 3rd ACIS International Conference on Applied Computing and Information Technology

    2016-01-01

    This edited book presents scientific results of the 3nd International Conference on Applied Computing and Information Technology (ACIT 2015) which was held on July 12-16, 2015 in Okayama, Japan. The aim of this conference was to bring together researchers and scientists, businessmen and entrepreneurs, teachers, engineers, computer users, and students to discuss the numerous fields of computer science and to share their experiences and exchange new ideas and information in a meaningful way. Research results about all aspects (theory, applications and tools) of computer and information science, and to discuss the practical challenges encountered along the way and the solutions adopted to solve them.

  19. On the Generalisation of Kepler's 3rd Law for the Vacuum Field of the Point-Mass

    Crothers S. J.

    2005-07-01

    Full Text Available I derive herein a general form of Kepler’s 3rd Law for the general solution to Einstein’s vacuum field. I also obtain stable orbits for photons in all the configurations of the point-mass. Contrary to the accepted theory, Kepler’s 3rd Law is modified by General Relativity and leads to a finite angular velocity as the proper radius of the orbit goes down to zero, without the formation of a black hole. Finally, I generalise the expression for the potential function of the general solution for the point-mass in the weak field.

  20. Catalysis in the 3rd Dimension: How Organic Molecules May be Formed

    Freund, Friedemann; DeVincenzi, D. (Technical Monitor)

    2001-01-01

    Catalysis is often little more than a word to phenomenologically describe the fact that a reaction follows a pat1 that leads to products of an unexpected kind or of unexpected yield. Low activation energy barriers for intermediates are recognized as the most likely cause why a system deviates from the thermodynamic pull towards minimizing its free energy and ends up in a metastable state. Seldom is the mechanism known. This i: particularly true for heterogeneous catalysis under hydrothermal conditions with minerals as catalysts. It is commonly assumed that catalytic action takes place across solid-fluid interfaces and that, on the atomic level, interfaces are just 2-dimensional contacts. This makes it difficult to understand, for instance, the assembly of long-chain carboxylic (fatty) acids. 3y studying single crystals that grew from a melt in the presence of H2O and CO2, we can show: (1) that numerals take up the fluid components into solid solution, (2) that some-thing happens converting them to -educedH and C, (3) that C atoms segregate into dislocations and tie C-C bonds. The products are medium-to-long chain Cn protomolecules, with some C-H attached, pre-assembled in the dislocations. Upon solvent extraction, these proto-molecules turn into carboxylic and dicarboxylic acids. This observation suggests that, in a very elementary step, catalysis under hydrothermal conditions leading to fatty acids involves the pre-assembly of Cn entities in the interface that is not 2-D but extends into the 3rd dimension, with dislocations as synthesis sites.

  1. The 3rd questionnaire report of safety control on instrument in nuclear medicine laboratory

    The present 3rd survey was aimed at grasping safety control in nuclear medicine examination and the trend for SPECT usage. Questionnaires were sent to 1238 facilities dealing with nuclear medicine; and 1127 facilities (91.0%) responded. The survey period was three years from April 1, 1989 through March 31, 1992. The following 7 items were surveyed: (1) nuclear medicine personnel, (2) nuclear medicine equipments, (3) accidents occurring in nuclear medicine laboratories, (4) risk factors leading to accidents, (5) countermeasures for improving safety control, (6) major breakdown of the machinery and equipment, and (7) demands for makers. Majority of nuclear medicine personnel were male and were less than 50 years old. The number of SPECT equipments increased from 714 in the previous survey to 968. Accidents (personal injuries) and narrow escape from an accident were seen in 45 and 154 cases. Personal injuries such as falling occurred in 37 patients and 8 nuclear medicine personnel. According to nuclear medicine examinations, SPECT was the most common examination associated with accident and narrow escape cases (86/199). Such cases at the beginning of examination were remarkably decreased, as compared with those in the previous two surveys. Accidents were primarily attributable to careless management by personnel. Breakdown of the machinery and equipment was reported in 207 cases. In Item 5, the following contents were presented: heads for examination, personnel's behavior, education, examination equipments, collimators and others. Finally, contents in Item 7 included: equipment design, heads for examination, maintenance or management, data processing, collimators, examination equipments and others. (N.K.)

  2. Overview of the 3rd phase crossover research on migration of radionuclides in biosphere

    In 1991, we started a series of projects in Nuclear Energy Generic Crossover Research, which is known as ''Crossover Research (CR)''. This 1st phase was successfully finished with the active cooperation of five organizations: Japan Atomic Energy Research Institute (JAERI), Meteorological Research Institute (MRI), National Institute of Radiological Sciences (NIRS), the Institute of Physical and Chemical Research (RIKEN) and Power Reactor and Nuclear Fuel Development Corporation (PNC). Subsequently we carried out the 2nd phase of CR (1996-1998). A new member, Institute for Environmental Sciences (IES) participated from this phase. In the 3rd phase CR, a project on ''Development of a dynamic transfer model of radionuclides in the soil ecosphere'', is currently being promoted (1999-2003). The following five researches are carried out in this project. (1) Research into the forms of existence of nuclide and their change in the soil (NIRS and JAERI), (2) Research into the transition behavior of radionuclides in plants (IES, RIKEN and NIRS), (3) Research into the relation to the microorganism and on environmental remediation (RIKEN, JAERI and NIRS), (4) Research on the migration of radionuclides from atmosphere to soil and plant (MRI and JAERI), and (5) Database construction on transfer parameters (JAERI, NIRS and MRI). Then, JAERI, MRI and NIRS are working on the development of a dynamic transfer model for radionuclides on the basis of a gained knowledge about the environmental behavior with the cooperation of universities, etc. The dynamic transfer model developed in this project is effective not only for Japan, but also for the Southeast Asian countries. Besides, this model is capable of predicting the behavior of materials that are harmful to the environment, i.e. hazardous heavy metals discharged in the soil ecosphere. (author)

  3. PREFACE: 3rd International Youth Conference "Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology" (Nanobiotech 2015)

    Refsnes, Magne, Prof; Gusev, Alexander, Dr; Godymchuk, Anna, Dr; Bogdan, Anna

    2015-11-01

    The 3rd International Youth Conference "Interdisciplinary Problems of Nanotechnology, Biomedicine and Nanotoxicology" (Nanobiotech2015) was held on 21-22 May 2015 in Tambov, Russia, and was jointly organized by Tambov Derzhavin State University (Russia), the Norwegian Institute of Public Health (Norway), the National University of Science and Technology MISiS (Russia), Tomsk Polytechnic University (Russia) and Tomsk State University. The conference gathered experienced and young researchers, post-docs and students, working in the fieldof nanotechnologies, nanomedicine, nano(eco)toxicology and risk assessment of nanomaterials, in order to facilitate the aggregation and sharing of interests and results for better collaboration and visibility of activity. The goal of Nanobiotech2015 was to bring researchers and practitioners together to share the latest knowledge on nanotechnology-specific risks to occupational and environmental health and assessing how to reduce these potential risks. The main objective of the conference is to identify, systematize and solve current scientific problems inthe sphere of nanobiotechnologies, nanomedicine and nanotoxicology, in order to join forces todetermine prospective areas and compose working groups of interested co-workers for carrying out interdisciplinary research projects. The topics of Nanobiotech2015 were: (1) Nanotechnologies in pharmaceutics and medicine; (2) Sources and mechanisms of nanoparticle release into the environment; (3) Ecological and biological effects of nanoparticles; (4) (Eco)toxicology of nanomaterials; (5) Methods for detection of nanoparticles in the environment and in biological objects; and (6) Physico-chemical properties of nanoparticles in the environment. We want to thank the Organizing Committee, the universities and sponsors supporting the conference,and everyone who contributed to the organization of this meeting, for their contribution towards the conference and for their contributions to these

  4. Proceedings of the 3rd workshop on ion-beam-applied biology

    In order to encourage research on biological application using ion beam at TIARA, we have had the workshop on ion beam applied biology at JAERI Takasaki every year since 2002. The 3rd workshop titled 'Future development of plant research using the positron imaging method - Understanding the plant functions through visualization images-' is held this year. The main topics of this workshop are introduction of the latest studies on the assimilation and transportation of nutrients by plant using positron imaging method. Further, related technologies of the positron imaging and prospect of positron imaging for is discussed. We hope this workshop popularizes positron imaging technology for plants, accelerates cooperation between industries, universities and governmental institutes and contributes future projects of understanding of the physiological functions of plants using the positron imaging method. This workshop was held on September 29th 2004, hosted by JAERI Takasaki and cooperated by The Japan Radioisotope Association, Japanese Society of Soil Science and Plant Nutrition. The Japanese Society of Plant Physiologists, Atomic Energy Society of Japan, The Japanese Society of Nuclear and Radiochemical Science and The Ion Beam Breeding Society. There were 85 participants from not only universities and laboratories but also private company developing the environment conservation technology, so on. Highly qualified presentations were given on biological studies with ion beam, on analysis of plant functions using the positron imaging method and on supporting technology for the positron imaging monitoring. Progress in the elucidation of plant functions is expected to develop the technologies for production of safe provisions and conservation of environment with plant. The 14 of the presented papers are indexed individually. (J.P.N.)

  5. Guidelines for the Review of Research Reactor Safety: Revised Edition. Reference Document for IAEA Integrated Safety Assessment of Research Reactors (INSARR)

    The Integrated Safety Assessment of Research Reactors (INSARR) is an IAEA safety review service available to Member States with the objective of supporting them in ensuring and enhancing the safety of their research reactors. This service consists of performing a comprehensive peer review and an assessment of the safety of the respective research reactor. The reviews are based on IAEA safety standards and on the provisions of the Code of Conduct on the Safety of Research Reactors. The INSARR can benefit both the operating organizations and the regulatory bodies of the requesting Member States, and can include new research reactors under design or operating research reactors, including those which are under a Project and Supply Agreement with the IAEA. The first IAEA safety evaluation of a research reactor operated by a Member State was completed in October 1959 and involved the Swiss 20 MW DIORIT research reactor. Since then, and in accordance with its programme on research reactor safety, the IAEA has conducted safety review missions in its Member States to enhance the safety of their research reactor facilities through the application of the Code of Conduct on the Safety of Research Reactors and the relevant IAEA safety standards. About 320 missions in 51 Member States were undertaken between 1972 and 2012. The INSARR missions and other limited scope safety review missions are conducted following the guidelines presented in this publication, which is a revision of Guidelines for the Review of Research Reactor Safety (IAEA Services Series No. 1), published in December 1997. This publication details those IAEA safety standards and guidance publications relevant to the safety of research reactors that have been revised or published since 1997. The purpose of this publication is to give guidance on the preparation, implementation, reporting and follow-up of safety review missions. It is also intended to be of assistance to operators and regulators in conducting

  6. Visual Arts Teaching in Kindergarten through 3rd-Grade Classrooms in the UAE: Teacher Profiles, Perceptions, and Practices

    Buldu, Mehmet; Shaban, Mohamed S.

    2010-01-01

    This study portrayed a picture of kindergarten through 3rd-grade teachers who teach visual arts, their perceptions of the value of visual arts, their visual arts teaching practices, visual arts experiences provided to young learners in school, and major factors and/or influences that affect their teaching of visual arts. The sample for this study…

  7. M.Sc. in Civil and Structural Engineering:3rd Semester and Master’s Thesis Ideas 2014

    2014-01-01

    The following pages contain a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short master projects as well as regular 3rd semester projects at the M.Sc. programme in Civil and Structural Engineering.

  8. M.Sc. in Civil and Structural Engineering:3rd Semester and Master’s Thesis Ideas 2011

    2011-01-01

    This catalogue contains a list of project ideas proposed by the scientific staff at the Department of Civil Engineering, Aalborg University, and a number of companies. Most of the project ideas in this catalogue may form the basis for long and short candidate projects as well as regular 3rd semester projects at the M.Sc. programme in Civil and Structural Engineering.

  9. Abstracts from the Third International Meeting of ISEV 2014 Rotterdam, The Netherlands, April 30th – May 3rd, 2014

    supplement, Complete

    2014-01-01

    Abstracts from the Third International Meeting of ISEV 2014 Rotterdam, The Netherlands, April 30th – May 3rd, 2014(Published: 25 April 2014)Citation: Journal of Extracellular Vesicles 2014, 3: 24214 - http://dx.doi.org/10.3402/jev.v3.24214

  10. Constancy and Variability: Dialogic Literacy Events as Sites for Improvisation in Two 3rd-Grade Classrooms

    Jordan, Michelle E.; Santori, Diane

    2015-01-01

    This multisite study investigates dialogic literacy events that revolved around narrative and informational texts in two 3rd-grade classrooms. The authors offer a metaphor of musical improvisation to contemplate dialogic literacy events as part of the repertoire of teaching and learning experiences. In literacy learning, where there is much…

  11. 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations

    Rubini, Riccardo; D'Elia, Gianluca; Cocconcelli, Marco; Chaari, Fakher; Zimroz, Radoslaw; Bartelmus, Walter; Haddar, Mohamed

    2014-01-01

    This book presents the processings of the third edition of the Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO13) which was held in Ferrara, Italy. This yearly event merges an international community of researchers who met – in 2011 in Wroclaw (Poland) and in 2012 in Hammamet (Tunisia) – to discuss issues of diagnostics of rotating machines operating in complex motion and/or load conditions. The growing interest of the industrial world on the topics covered by the CMMNO13 involves the fields of packaging, automotive, agricultural, mining, processing and wind machines in addition to that of the systems for data acquisition.The participation of speakers and visitors from industry makes the event an opportunity for immediate assessment of the potential applications of advanced methodologies for the signal analysis. Signals acquired from machines often contain contributions from several different components as well as noise. Therefore, the major challenge of condition monitoring is to po...

  12. 3rd International Workshop on Advances in Simulation-Driven Optimization and Modeling

    Leifsson, Leifur; Yang, Xin-She

    2016-01-01

    This edited volume is devoted to the now-ubiquitous use of computational models across most disciplines of engineering and science, led by a trio of world-renowned researchers in the field. Focused on recent advances of modeling and optimization techniques aimed at handling computationally-expensive engineering problems involving simulation models, this book will be an invaluable resource for specialists (engineers, researchers, graduate students) working in areas as diverse as electrical engineering, mechanical and structural engineering, civil engineering, industrial engineering, hydrodynamics, aerospace engineering, microwave and antenna engineering, ocean science and climate modeling, and the automotive industry, where design processes are heavily based on CPU-heavy computer simulations. Various techniques, such as knowledge-based optimization, adjoint sensitivity techniques, and fast replacement models (to name just a few) are explored in-depth along with an array of the latest techniques to optimize the...

  13. PREFACE: 3rd International Workshop on "State of the Art in Nuclear Cluster Physics"

    Yamada, Taiichi; Kanada-En'yo, Yoshiko

    2014-12-01

    The 3rd International Workshop on "State of the Art in Nuclear Cluster Physics"(SOTANCP3) was held at KGU Kannai Media Center, Kanto Gakuin University, Yokohama, Japan, from May 26 to 30, 2014. Yokohama is the second largest city in Japan, about 25 km southeast of Tokyo. The first workshop of the series was held in Strasbourg, France, in 2008 and the second one was in Brussels, Belgium, in 2010. The purpose of SOTANCP3 was to discuss the present status and future perspectives of the nuclear cluster physics. The following nine topics were selected in order to cover most of the scientific programme and highlight an area where new ideas have emerged over recent years: (1) Cluster structures and many-body correlations in stable and unstable nuclei (2) Clustering aspects of nuclear reactions and resonances (3) Alpha condensates and analogy with condensed matter approaches (4) Role of tensor force in cluster physics and ab initio approaches (5) Clustering in hypernuclei (6) Nuclear fission, superheavy nuclei, and cluster decay (7) Cluster physics and nuclear astrophysics (8) Clustering in nuclear matter and neutron stars (9) Clustering in hadron and atomic physics There were 122 participants, including 53 from 17 foreign countries. In addition to invited talks, we had many talks selected from contributed papers. There were plenary, parallel, and poster sessions. Poster contributions were also presented as four-minute talks in parallel sessions. This proceedings contains the papers presented in invited and selected talks together with those presented in poster sessions. We would like to express our gratitude to the members of the International Advisory Committee and those of the Organizing Committee for their efforts which made this workshop successful. In particular we would like to present our great thanks to Drs. Y. Funaki, W. Horiuchi, N. Itagaki, M. Kimura, T. Myo, and T. Yoshida. We would like also to thank the following organizations for their sponsors: RCNP

  14. PREFACE: 3rd International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS 2012)

    Tayurskii, Dmitrii; Abe, Sumiyoshi; Alexandre Wang, Q.

    2012-11-01

    The 3rd International Workshop on Statistical Physics and Mathematics for Complex Systems (SPMCS2012) was held between 25-30 August at Kazan (Volga Region) Federal University, Kazan, Russian Federation. This workshop was jointly organized by Kazan Federal University and Institut Supérieur des Matériaux et Mécaniques Avancées (ISMANS), France. The series of SPMCS workshops was created in 2008 with the aim to be an interdisciplinary incubator for the worldwide exchange of innovative ideas and information about the latest results. The first workshop was held at ISMANS, Le Mans (France) in 2008, and the third at Huazhong Normal University, Wuhan (China) in 2010. At SPMCS2012, we wished to bring together a broad community of researchers from the different branches of the rapidly developing complexity science to discuss the fundamental theoretical challenges (geometry/topology, number theory, statistical physics, dynamical systems, etc) as well as experimental and applied aspects of many practical problems (condensed matter, disordered systems, financial markets, chemistry, biology, geoscience, etc). The program of SPMCS2012 was prepared based on three categories: (i) physical and mathematical studies (quantum mechanics, generalized nonequilibrium thermodynamics, nonlinear dynamics, condensed matter physics, nanoscience); (ii) natural complex systems (physical, geophysical, chemical and biological); (iii) social, economical, political agent systems and man-made complex systems. The conference attracted 64 participants from 10 countries. There were 10 invited lectures, 12 invited talks and 28 regular oral talks in the morning and afternoon sessions. The book of Abstracts is available from the conference website (http://www.ksu.ru/conf/spmcs2012/?id=3). A round table was also held, the topic of which was 'Recent and Anticipated Future Progress in Science of Complexity', discussing a variety of questions and opinions important for the understanding of the concept of

  15. SESAME — A 3rd Generation Synchrotron Light Source for the Middle East

    Å°lkü, Dinçer; Rahighi, Javad; Winick, Herman

    2007-01-01

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ˜133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  16. SESAME - A 3rd Generation Synchrotron Light Source for the Middle East

    U˝Lkü, Dinçer; Rahighi, Javad; Winick, Herman

    2007-01-01

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ~133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  17. SESAME - A 3rd Generation Synchrotron Light Source for the Middle East

    SESAME (Synchrotron-light for Experimental Science and Applications in the Middle East) will be the Middle East's first international research center. It is a cooperative venture by the scientists and governments of the region with founding members Bahrain, Egypt, Israel, Jordan, Pakistan, Palestine Authority, and Turkey. Iran is in the process of finalizing its formal membership. Other countries (Cyprus, Morocco, and the United Arab Emirates) are also expected to join. The permanent Council of member states has full responsibility for the project. Members provide the annual operating budget. Observer countries are Germany, Greece, Italy, Kuwait, Portugal, Russian Federation, Sweden, the UK, and the US. SESAME is being developed under the umbrella of UNESCO. Jordan was selected as the building site. SESAME will offer excellent opportunities for training of Middle East scientists and attract those working abroad to consider returning. SESAME will be a 2.5GeV 3rd Generation light source (emittance 26nm-rad, circumference ∼133m), providing excellent performance for structural molecular biology, molecular environmental science, surface and interface science, microelectromechanical devices, x-ray imaging, archaeological microanalysis, and materials characterization. It will cover a broad spectral range from the infrared to hard x-rays and will have 12 straight sections for insertion devices (average length 2.75m). The injector will be the BESSY I 0.8 GeV booster synchrotron which has been given as a gift from Germany. Four committees advise the Council and assist in developing the technical design, beam lines, user community, and scientific Program. The SESAME building, now in construction with funds and a site provided by Jordan, is scheduled for completion in late 2006 after which the BESSY I injector will be installed. First stored beam in the new 2.5 GeV ring is planned for 2009 with six initial beamlines planned. Some beamlines will be built by member countries

  18. ic-cmtp3: 3rd International Conference on Competitive Materials and Technology Processes

    2016-04-01

    Competitiveness is one of the most important factors in our lives and it plays a key role in the efficiency both of organizations and societies. The more scientifically advanced and prepared organizations develop more competitive materials with better physical, chemical, and biological properties, and the leading companies apply more competitive equipment and technological processes. The aims of the 3rd International Conference on Competitive Materials and Technology Processes (ic-cmtp3), and the 1st International Symposium on Innovative Carbons and Carbon Based Materials (is-icbm1) and the 1st International Symposium on Innovative Construction Materials (is-icm1) organized alongside are the following: —Promote new methods and results of scientific research in the fields of material, biological, environmental and technological sciences; —Exchange information between the theoretical and applied sciences as well as technical and technological implementations; —Promote communication and collaboration between the scientists, researchers and engineers of different nations, countries and continents. Among the major fields of interest are advanced and innovative materials with competitive characteristics, including mechanical, physical, chemical, biological, medical and thermal, properties and extreme dynamic strength. Their crystalline, nano - and micro-structures, phase transformations as well as details of their technological processes, tests and measurements are also in the focus of the ic-cmtp3 conference and the is-scbm1 and is-icm1 symposia. Multidisciplinary applications of material science and the technological problems encountered in sectors like ceramics, glasses, thin films, aerospace, automotive and marine industries, electronics, energy, construction materials, medicine, biosciences and environmental sciences are of particular interest. In accordance with the program of the ic-cmtp3 conference and is-icbm1 and is-icm1 symposia we have received more

  19. Recalibrating the Sunspot Number (SN): The 3rd and 4th SN Workshops

    Cliver, E. W.; Clette, F.; Svalgaard, L.; Vaquero, J. M.

    At the XIIth Hvar Astrophysical Colloquium in 2012, we reviewed the progress of an effort begun in 2011 to recalibrate the sunspot number (SN). That work is now nearing completion and we review the motivation, approach, and results of this process which was conducted via a series of four international workshops. Previously we discussed the principal results of workshops at Sunspot in 2011 and Brussels in 2012. These involved the identification of discontinuities circa 1885 in the Hoyt and Schatten Group SN and 1945 in the International SN. Subsequently, workshops were held in Tucson (2013) and Locarno (2014). Key results during the time of these two workshops included: (1) development of an independent ''backbone'' method for determining the Group sunspot number; (2) identification of post-1970 inhomogeneities in the Group SN and the International SN; (3) construction of preliminary revisions of the Group SN from 1610-present and the International SN from 1700--present; (4) reassessment (ongoing) of the Hoyt and Schatten Group SN data base from 1610-present; and (5) establishment of a SN archive at the University of Extremadura. The release of the new International and Group SN series is anticipated during the second half of 2015 and procedures are being put in place both to maintain the calibration of these two series and to produce subsequent revisions should more historical data be unearthed or new inhomogeneities in the series be uncovered or arise.

  20. Cluster editing

    Böcker, S.; Baumbach, Jan

    2013-01-01

    The Cluster Editing problem asks to transform a graph into a disjoint union of cliques using a minimum number of edge modifications. Although the problem has been proven NP-complete several times, it has nevertheless attracted much research both from the theoretical and the applied side. The...... algorithms for biological problems. © 2013 Springer-Verlag....... problem has been the inspiration for numerous algorithms in bioinformatics, aiming at clustering entities such as genes, proteins, phenotypes, or patients. In this paper, we review exact and heuristic methods that have been proposed for the Cluster Editing problem, and also applications of these...

  1. Conceptual Tools for Understanding Nature - Proceedings of the 3rd International Symposium

    Costa, G.; Calucci, M.

    1997-04-01

    The Table of Contents for the full book PDF is as follows: * Foreword * Some Limits of Science and Scientists * Three Limits of Scientific Knowledge * On Features and Meaning of Scientific Knowledge * How Science Approaches the World: Risky Truths versus Misleading Certitudes * On Discovery and Justification * Thought Experiments: A Philosophical Analysis * Causality: Epistemological Questions and Cognitive Answers * Scientific Inquiry via Rational Hypothesis Revision * Probabilistic Epistemology * The Transferable Belief Model for Uncertainty Representation * Chemistry and Complexity * The Difficult Epistemology of Medicine * Epidemiology, Causality and Medical Anthropology * Conceptual Tools for Transdisciplinary Unified Theory * Evolution and Learning in Economic Organizations * The Possible Role of Symmetry in Physics and Cosmology * Observational Cosmology and/or other Imaginable Models of the Universe

  2. The update of GHS third revised edition and protection of ozone layer%GHS第3修订版的更新和臭氧层的保护

    于晓; 吴晓蔚; 车礼东

    2013-01-01

    介绍了联合国全球化学品统一分类和标签制度(Globally Harmonized System of Classification and Labelling of Chemicals,GHS)的基本情况及其包含的危险类别,详细阐述了其第3修订版新加入的对于危害臭氧层物质的分类和《蒙特利尔协定书》的基本情况.通过列出我国制冷剂等行业淘汰消耗臭氧层物质的进展,分析了我国对《蒙特利尔协定书》的实施情况,并将GHS与淘汰消耗臭氧层物质结合提出了我国检验检疫部门在标准制定和进出口商品检验方面针对在我国全面实施《全球化学品统一分类和标签制度》的工作方向.%This paper introduces the basic situation of the Globally Harmonized System of Classification and Labelling of Chemicals ( GHS) and the hazard classes in it, and elucidates the addition of ozone depleting substances in its third revised edition and Montreal Protocol. The implementation of Montreal Protocol in China is analyzed by listing the development of elimination of ozone depleting substances in refrigeration and other industries. The work perspective of administration of inspection and quarantine in standards development and entry-exit goods inspection is discussed according to GHS combined with elimination of ozone depleting substances.

  3. Multilinguals and Wikipedia Editing

    Hale, Scott A

    2013-01-01

    This article analyzes one month of edits to Wikipedia in order to examine the role of users editing multiple language editions (referred to as multilingual users). Such multilingual users may serve an important function in diffusing information across different language editions of the project, and prior work has suggested this could reduce the level of self-focus bias in each edition. This study finds multilingual users are much more active than their single-edition (monolingual) counterparts. They are found in all language editions, but smaller-sized editions with fewer users have a higher percentage of multilingual users than larger-sized editions. About a quarter of multilingual users always edit the same articles in multiple languages, while just over 40% of multilingual users edit different articles in different languages. When non-English users do edit a second language edition, that edition is most frequently English. Nonetheless, several regional and linguistic cross-editing patterns are also present...

  4. PREFACE: 3rd International Workshop on Materials Analysis and Processing in Magnetic Fields (MAP3)

    Sakka, Yoshio; Hirota, Noriyuki; Horii, Shigeru; Ando, Tsutomu

    2009-07-01

    The 3rd International Workshop on Materials Analysis and Processing in Materials Fields (MAP3) was held on 14-16 May 2008 at the University of Tokyo, Japan. The first was held in March 2004 at the National High Magnetic Field Laboratory in Tallahassee, USA. Two years later the second took place in Grenoble, France. MAP3 was held at The University of Tokyo International Symposium, and jointly with MANA Workshop on Materials Processing by External Stimulation, and JSPS CORE Program of Construction of the World Center on Electromagnetic Processing of Materials. At the end of MAP3 it was decided that the next MAP4 will be held in Atlanta, USA in 2010. Processing in magnetic fields is a rapidly expanding research area with a wide range of promising applications in materials science. MAP3 focused on the magnetic field interactions involved in the study and processing of materials in all disciplines ranging from physics to chemistry and biology: Magnetic field effects on chemical, physical, and biological phenomena Magnetic field effects on electrochemical phenomena Magnetic field effects on thermodynamic phenomena Magnetic field effects on hydrodynamic phenomena Magnetic field effects on crystal growth Magnetic processing of materials Diamagnetic levitation Magneto-Archimedes effect Spin chemistry Application of magnetic fields to analytical chemistry Magnetic orientation Control of structure by magnetic fields Magnetic separation and purification Magnetic field-induced phase transitions Materials properties in high magnetic fields Development of NMR and MRI Medical application of magnetic fields Novel magnetic phenomena Physical property measurement by Magnetic fields High magnetic field generation> MAP3 consisted of 84 presentations including 16 invited talks. This volume of Journal of Physics: Conference Series contains the proceeding of MAP3 with 34 papers that provide a scientific record of the topics covered by the conference with the special topics (13 papers) in

  5. 3rd International School of Trigger and Data Acquisition - Cracow (Poland), 1 – 8 February 2012

    Yi Ling

    2011-01-01

    After two successful editions of the International School of Trigger and Data Acquisition (ISOTDAQ), the ISOTDAQ 2012 is the third of a series of this International School dedicated to introduce MSc and PhD students to the arts and crafts of triggering and acquiring data for physics experiments. The school will be held from 1 – 8 February 2012 in the Cracow University of Technology and Institute of Nuclear Physics, Cracow, Poland.  The school provides an up-to-date overview of the basic instruments and methodologies used in high energy physics, spanning from small experiences in lab to the very large LHC experiments, spotting the main building blocks as well as the different solutions and architectures at different levels of complexity. The main topics of the school include the basics of Data Acquisition (DAQ) programming concepts (e.g. threaded programming, data storage, networking, IO programming), hardware bus systems (VME bus, PCI), Trigger logic and Hardware (NIM). PC based readout...

  6. Air Sampling Instruments for Evaluation of Atmospheric Contaminants. Fourth Edition.

    American Conference of Governmental Industrial Hygienists, Cincinnati, OH.

    This text, a revision and extension of the first three editions, consists of papers discussing the basic considerations in sampling air for specific purposes, sampler calibration, systems components, sample collectors, and descriptions of air-sampling instruments. (BT)

  7. Coronal MR imaging of the normal 3rd, 4th, and 5th lumbar and 1st sacral nerve roots

    Seven healthy volunteers underwent coronal MR imaging at 1.5 tesla of the normal 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots. Coronal slices, 3-mm-thick with a 0.3-mm gap between the slices were obtained (TR/TE 600/22) through the lumbar spinal canal. All the nerve roots were visible on at least one image. One can routinely expect to demonstrate the 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots on T1-weighted, 3-mm-thick coronal MR scans. We found no correlation between the degree of lumbar lordosis and the lengths of the visible nerve roots. Five patients with one of the following spinal problems: anomaly, tumor, disk herniation, and failed back surgery syndrome were examined according to our protocol. In all these cases coronal MR imaging gave the correct diagnosis. (orig.)

  8. Coronal MR imaging of the normal 3rd, 4th, and 5th lumbar and 1st sacral nerve roots

    Hald, J.K.; Nakstad, P.H.; Hauglum, B.E. (National Hospital, Oslo (Norway). Dept. of Radiology)

    1991-05-01

    Seven healthy volunteers underwent coronal MR imaging at 1.5 tesla of the normal 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots. Coronal slices, 3-mm-thick with a 0.3-mm gap between the slices were obtained (TR/TE 600/22) through the lumbar spinal canal. All the nerve roots were visible on at least one image. One can routinely expect to demonstrate the 3rd, 4th, and 5th lumbar, and 1st sacral nerve roots on T1-weighted, 3-mm-thick coronal MR scans. We found no correlation between the degree of lumbar lordosis and the lengths of the visible nerve roots. Five patients with one of the following spinal problems: anomaly, tumor, disk herniation, and failed back surgery syndrome were examined according to our protocol. In all these cases coronal MR imaging gave the correct diagnosis. (orig.).

  9. The 26th China Autumn Motorcycle and Parts Fair,the 3rd China [Guangzhou] International Motorcycle Parts Exhibition Opened

    Zhang Jinzhu; Xu Jianmei

    2006-01-01

    @@ The 26th China Autumn Motorcycle and Parts Fair,the 3rd China (Guangzhou) International Motorcycle Parts Exhibition (CAMPF),organized by China National Automobile Industry Sales Corp.,Guangzhou Baiyun District Government,China Federation of Industry and Commerce Auto & Motorbike Parts Articles for Use Chamber of Commerce,undertook by Guangzhou Baiyun Motorbike Parts Wholesales Market,opened on November 12 in Guangzhou.

  10. The 2nd and 3rd lower molars development of in utero gamma irradiated mouse fetus and neonates

    Pregnant mothers were irradiated by a single dose of gamma rays (0, 2, 4, 6 Gy cobalt 60) in the days 10, 12, 14, 16, 18 of pregnancy. The heads of the embryos, and those of the neonates were taken at consecutive intervals of irradiation, starting from 16 days of pregnancy till 3rd day after delivery. The effect of irradiation was investigated in the development of the 2nd and 3rd lower molars on serial tissue sections, within consecutive periods of their organogenesis. Irradiation led to growth-deficiency in the 2nd and 3rd molars, and causes delay in their development. This was observed in various degree depending on the dose, time of irradiation, and time after irradiation. This belated development was manifested in morphogenesis, histogenesis, and odontoblasts and ameloblastis cyto and functional differentiations. The study showed that the delay in the development-stages of the 2nd lower molar, under control, if compared with the same process, to which is exposed, the 1st lower molar - within two days difference - dose not diminish the later irradiation effect on the 2nd molar, when compared with the immediate irradiation effect in the 1st molar (demonstrated in a previous study by Osman and Al-Achkar, 2001). On the contrary, the present study showed that the 2nd lower molar is more radiosensitive to various doses than the 1st lower molar. Also it showed the irradiation with two doses 4 and 6 Gy leads to a delay in the formation of the 3rd lower molar's bud, and it does not go deeper beyond the lower molar. (Author)

  11. The Relation between Academic Competence and Social Competence along Time: A Study with 3rd and 4th Grades

    Veríssimo, Lurdes; de Lemos, Marina Serra; Lopes, João; Rodrigues, Luís Paulo

    2015-01-01

    The association between social competence and academic achievement has been broadly supported. This paper is guided by the theoretical model of social competence of Vaughn and Hogan (1990) and tries to explore the relation between social competence and academic competence along schooling. The results presented are from a longitudinal study with four data collection moments. Participants were 240 students from primary school (3rd and 4th grades). The main goal is to understand the reciprocal r...

  12. A 3rd Order Low Power SI Sigma-Delta A/D Converter for Voice-Band Applications

    Jørgensen, Ivan Herald Holger; Bogason, Gudmundur

    This paper presents a 3rd order switched current-ΣΔ-modulator. The ΣΔ-modulator operates at a sampling rate of fs=600 kHz and the signal band is fb=5.5 kHz, i.e., an oversampling factor of R=54.5 is used. Multiple input signals are used to reduce the internal signal swings which results in reduce...

  13. An Inquiry into Perceived Autonomy Support of Iranian EFL Learners: 2nd, 3rd and 4th Grade University Students

    Husain Abdulhay

    2015-01-01

    Gaining an insight into Iranian EFL learning environment is increasingly felt, consonant with dissociation from the traditional and spoon-feeding rituals of Iranian indigenous teaching. To that end, the study tried to scour the grade level differences of 202 students in their perceived autonomy support in the context of Iranian universities. Exposures to autonomy supportive environment were examined in 2nd, 3rd and 4th grade-levels through the administration of Learning Climate Questionnaire ...

  14. 3rd Summer Youth Olympic Games in 2018: report of the IOC working group : Lausanne, November 2012

    2015-01-01

    The IOC Working Group for the 3rd Summer Youth Olympic Games (YOG) in 2018 is pleased to present the results of its evaluation of the five candidate cities (listed in alphabetical order): Buenos Aires (ARG), Glasgow (GBR), Guadalajara (MEX), Medellin (COL) and Rotterdam (NED). The Working Group notes that the city of Poznan (POL) withdrew its candidature mid-October 2012.Following an introduction that provides information on the methodology followed in assessing the cities’ projects and some ...

  15. Addressing learning difficulties in Newtons 1st and 3rd Laws through problem based inquiry using Easy Java Simulation

    Goh, Khoon Song Aloysius; Yip, Kim Wah; Toh, Ping Yong Jeffrey; Lye, Sze Yee

    2013-01-01

    We develop an Easy Java Simulation (EJS) model for students to visualize Newtons 1st and 3rd laws, using frictionless constant motion equation and a spring collision equation during impact. Using Physics by Inquiry instructional (PbI) strategy, the simulation and its problem based inquiry worksheet aim to enhance learning of these two Newtonian concepts. We report results from Experimental (N=62 students) and Control (N=67) Groups in 11 multiple choice questions pre and post tests, conducted by three teachers in the school. Results suggest, at 95 percent confidence level, significant improvement for concept of Newtons 1st Law while not so for Newtons 3rd Law. A Focus Group Discussion revealed students confirming the usefulness of the EJS model in visualizing the 1st Law while not so much for the 3rd Law. We speculate the design ideas for constant velocity motion in the computer model coupled with the PbI worksheet did allow for making sense and experiencing of the 1st Law, where traditional pen-paper represen...

  16. Preoperative and Postoperative (1st and 3rd Month Metabolic Data of Patients Who Underwent Bariatric Surgery

    Nilüfer Özdemir Kutbay

    2015-03-01

    Full Text Available Purpose: The growing prevalence of obesity has become a major concern. The efficacy of medical treatment, diet and behavior therapy in morbidly obese patients is limited. Obesity surgery is a treatment option for selected morbidly obese patients. Material and Method: Data of 47 patients (n=39 women, 8 men who underwent bariatric surgery were investigated. Results: Out of 47 patients, 20 underwent Roux-en-Y gastric bypass (RYGB (43% and 27 had sleeve gastrectomy (SG (57%. The mean age of the patients was 37±9.5 (19-59 years. 17% of patients were men and 83% were women. In the analysis of data on weight that could be found for 31 out of 47 patients, we detected preoperative and postoperative (1st and 3rd month mean weight values as 125.4±15.9 kg, 112.7±13.2 kg (p<0.001 and 100.9±17.5 kg (p<0.001, respectively. In addition, the analysis of the data on mean fasting plasma glucose (FPG levels which could be found for 23 out of 47 patients, showed us that preoperative and postoperative (1st and 3rd month FPG levels were 100.9±17.5 mg/dL, 91.6±10.9 mg/dL (p=0.03 and 87.3±2.0 mg/dL, respectively. Only 1 patient had diabetes before the surgery. In the RYGB group, the mean change in weight was 12.4±5.5 kg in the 1st month and 22.2±8.6 kg in the 3rd month (compared to the weights in the preoperative period. Moreover, in the SG group, the mean change in weight was 13.7±4.5 kg in the 1st month and 23.4±5.8 kg in the 3rd month. No statistically significant difference was found between the weight changes in the 1st and the 3rd month as for surgery types. Discussion: After bariatric surgery, significant loss in weight and reduction in FPG occurred in short-term.

  17. Stages of Geoinformation Evolution Related to the Territories Described in the Bible - from the 3Rd Millennium B.C. to Modern Times

    Linsenbarth, Adam

    2012-09-01

    The paper presents consecutive stages of the evolution of geoinformation related to the territories of the events described in the Bible. Two geoinformation sources are presented: the Bible and non-Bible sources. In the Bible there is much, often some highly detailed information regarding terrain topography. The oldest non-Bible sources are incorporated in the ancient documents, which were discovered in Egypt and Mesopotamia. Some of them are related to the 3rd millen- nium B.C. The further stages are related to the onomasticons and itineraries written by travellers and pilgrims to the Holy Land. The most famous onomasticons include: onomasticons prepared by bishop Eusebius from Caesarea and those pre- pared by St. Jerome. One of the oldest maps of Palestine's territory is the so-called mosaic map of Madaba dated to 565. In the 15th century several Bible maps were edited. The most rapid evolution occurred in the 16th and 17* centuries, when the world famous cartographers such as Mercator and Ortelius edited several maps of Palestine's territory. Cartographers from several European countries edited more than 6,000 maps presenting the Biblical territories and Biblical events. Modem maps, based on detailed topographical surveys, were edited m the second half of the 19* and 20th centuries. W artykule przedstawiono kolejne etapy rozwoju geoinformacji dotyczącej terenówr biblijnych. Omówiono dwa źródła informacji, a mianowicie geoinformacje biblijne i pozabiblijne. W tekstach biblijnych można znaleźć wiele, często bardzo detalicznych informacji topograficznych. Najstarsze źródła pozabiblijne, to starożytne dokumenty odnalezione na terenach Egiptu i Mezopotamii. Niektóre z nich pochodzą z trzeciego milenium przed Chr. Kolejnym etapem geoinformacji były onomastikony oraz dzienniki podróży pisane przez podróżników i pielgrzymów do Ziemi Świętej. Do najbardziej znanych należy onomastikon sporządzony przez biskupa Euzebiusza z Cezarei oraz

  18. Handbook of Qualitative Research. Second Edition.

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    This handbook's second edition represents the state of the art for the theory and practice of qualitative inquiry. It features eight new topics, including autoethnography, critical race theory, applied ethnography, queer theory, and "testimonio"every chapter in the handbook has been thoroughly revised and updated. The book contains:"Preface" (1…

  19. A Dictionary of American Idioms. Third Edition.

    Makkai, Adam; And Others

    This revised, updated, and expanded edition defines more than 8000 idiomatic words and phrases of American English. Each alphabetical entry has a grammatical explanation and an example sentence. The dictionary, which includes a preface in nine different languages, is a tool to help increase fluency in English for students, business travelers, and…

  20. PREFACE: The 3rd ISESCO International Workshop and Conference On Nanotechnology 2012 (IWCN2012)

    Umar, Akrajas Ali; Yahaya, Muhammad; Mat Salleh, Muhamad

    2013-04-01

    The ISESCO Conference on Nanomaterials and Applications (IWCN2012) is one of a series of nanotechnology seminars organized by ISESCO, Malaysian Solid State Science and Technology Society (MASS), the Universiti Kebangsaan Malaysia. IWCN2012 is the third seminar, following IWCN2007 and IWCN2010, held in the Universiti Kebangsaaan Malaysia, Bangi Malaysia from 5-7 December 2012. The conference was attended by more than 250 participants from 15 countries, including 150 students. The conference and workshop provided a forum for researchers and students, policymakers and other professionals especially from the ISESCO Member States to exchange information, enhance understanding and more importantly to engage in the development of new nanoscience and nanotechnology research in multidisciplinary areas in physics, chemistry and biology. Together with the conference, the third Meeting of the ISESCO Expert Panel on Nanotechnology was held to chart the future activities in Nanoscience and Nanotechnology in ISESCO member countries. The objective of the conference is to communicate and discuss recent progress in nanoscience and nanotechnology research and its potential applications in future economic growth. The main focus for the present activity is on energy and environment. The conference received 105 papers in total and 50 of them were selected to be considered for publication in Journal of Physics: Conference Series. However, finally, after undergoing vigorous and thorough revisions by respected editors and reviewers in the fields, 29 papers were accepted. This volume covers the follwing topics: Nanomaterials Synthesis and Characterization Nanomaterials for Energy and Catalysis Nanoelectronics, Sensors and MEMS Devices Nanophotonics We are indebted to all the keynote speakers, invited speakers, participant and authors for their contribution to this event. Their contribution has led to the success of this conference. We are also very grateful for the time, effort and

  1. Palaeopathology of human remains of the 1st century BC–3rd century AD from Armenia (Beniamin, Shirakavan I)

    Khudaverdyan Anahit Yu.

    2015-01-01

    The aim of this article was to document the pathology of the individuals from the archeological sites of Beniamin and Shirakavan I, Armenia, dated on the 1st century BC - 3rd century AD. The findings revealed that two groups differed in mean age at death of adults. At Beniamin it was 24 years, 40.8 years for males and 30.9 years for females, whereas at Shirakavanit it was 29.3 years, 29.6 years for males and 35.8 years for females. The greatest mortality appeared to have occurred when the chi...

  2. 3rd DAtF-seminar on the development of potential for young scientists and engineers in nuclear technology

    The 3rd seminar organized by the Deutsches Atomforum e.V. for young nuclear scientists and engineers seeking to realize their potential was about 'Communication - Key to Acceptance'. The topic was presented in contributions outlining the scientific viewpoint and in results of practical everyday experience. The young participants from all areas of the nuclear industry were sensitized to the problem areas under discussion, which were then debated in more detail. Reference was made to the importance of continuous communication with all participants. The seminar offered valuable suggestions for working with the media and the public, but also for handling information in one's daily work. (orig.)

  3. Influence of solar eclipse of November 3rd, 2013 on the total ozone column over Badajoz, Spain

    Mateos, D; Vaquero, J M

    2014-01-01

    The hybrid eclipse of November 3rd, 2013 was observed as partial with a magnitude equal to 0.126 from Badajoz (38^\\circ 53' N, 6^\\circ 58' W). The evolution of the Total Ozone Column (TOC) values during 4 hours was monitored using a Solar Light Microtops-II manual sun-photometer. Before the eclipse, TOC remained invariable ~280 Dobson Units (DU) for one hour and a half. Once the eclipse was started, a clear decrease in TOC occurred. After the eclipse maximum (with TOC = 273 DU), a rapid TOC recovery was observed. When the eclipse was over, TOC came back to values ~280 DU.

  4. Test Review: Wechsler Abbreviated Scale of Intelligence, Second Edition

    Irby, Sarah M.; Floyd, Randy G.

    2013-01-01

    The Wechsler Abbreviated Scale of Intelligence, Second Edition (WASI-II; Wechsler, 2011) is a brief intelligence test designed for individuals aged 6 through 90 years. It is a revision of the Wechsler Abbreviated Scale of Intelligence (WASI; Wechsler, 1999). During revision, there were three goals: enhancing the link between the Wechsler…

  5. Institute for Science Education. Institut fur die Padagogik der Naturwissenschaften an der Universitat Kiel. IPN Report-in-Brief 11. 3rd Edition.

    Blansdorf, Klaus, Ed.

    The Institut fur die Padagogik der Naturwissenschaften (IPN) is the research institute for science education, with a national function in the Federal Republic of Germany. The IPN consists of biology education, chemistry education, physics education, educational science, research methodology/statistics, and administration/general services…

  6. Students' Alternative Frameworks and Science Education. Bibliography. 3rd Edition. IPN Reports-in-Brief = Alltagsvorstellungen und Naturwissenschaftlicher Unterricht. Bibliographie. 3. Auflage. IPN-Kurzberichte.

    Pfundt, Helga; Duit, Reinders

    This bibliography contains some 2,000 articles on empirical investigation and theoretical considerations covering the topic of students' conceptions entered before September 1990. PUblications in journals, books, working papers, and contributions to conferences are included. English, German, and French publications, and ones in other languages are…

  7. China energy databook. Revision 2, 1992 edition

    Sinton, J.E.; Levine, M.D.; Liu, Feng; Davis, W.B. [eds.] [Lawrence Berkeley Lab., CA (United States); Jiang Zhenping; Zhuang Xing; Jiang Kejun; Zhou Dadi [eds.] [State Planning Commission of China, Beijing, BJ (China). Energy Research Inst.

    1993-06-01

    The Energy Analysis Program at the Lawrence Berkeley Laboratory (LBL) first became involved in Chinese energy issues through a joint China-US symposium on markets and demand for energy held in Nanjing in November of 1988. Discovering common interests, EAP began to collaborate on projects with the Energy Research Institute of China`s State Planning Commission. In the course of this work it became clear that a major issue in the furtherance of our research was the acquisition of reliable data. In addition to other, more focused activities-evaluating programs of energy conservation undertaken in China and the prospects for making Chinese industries more energy-efficient, preparing historical reviews of energy supply and demand in the People`s Republic of China, sponsoring researchers from China to work with experts at LBL on such topics as energy efficiency standards for buildings, adaptation of US energy analysis software to Chinese conditions, and transportation issues, we decided to compile, assess, and organize Chinese energy data. We are hopeful that this volume will not only help us in our work, but help build a broader community of Chinese energy policy studies within the US. In order to select appropriate data from what was available we established several criteria. Our primary interest was to use the data to help understand the historical evolution and likely future of the Chinese energy system. A primary criterion was thus that the data relate to the structure of energy supply and demand in the past and indicate probable developments (e.g., as indicated by patterns of investment). Other standards were accuracy, consistency with other information, and completeness of coverage. This is not to say that all the data presented herein are accurate, consistent, and complete, but where discrepancies and omissions do occur we have tried to note them.

  8. The City in India. Revised Edition.

    Panigrahi, Lalita

    This is a guide to a series of 8mm loop films on the Indian cities of Kanchipuram, Jaisalmer (two films), Fatehpur Sikri, Chandigarh, Gwalior, Bombay, Simla, Goa, Jamshedpur, and Ahmedabad. Each four to five minute film is a source of material for self-study and for group discussion by students in introductory civilizations courses, comparative…

  9. Oklahoma Handbook: Child Nutrition Programs. Revised Edition.

    Oklahoma State Dept. of Education, Oklahoma City.

    Nutrition concepts, school food service guidelines, and related materials (such as nutrition charts, menu planning worksheets, and student survey forms) are provided in this nutrition handbook. Prepared by the Oklahoma State Department of Education's School Lunch Section, the handbook consists of nine sections that are organized in outline format.…

  10. The Holistic Curriculum. Revised and Expanded Edition.

    Miller, John P.

    Holistic education attempts to bring education into alignment with the fundamental realities of nature. This book argues for adopting a holistic educational curriculum. Chapter 1 offers a rationale for and description of holistic education. Chapter 2 reviews the philosophic contexts of the transmission and transaction positions--atomism and…

  11. Anatomy and Physiology. Revised Teacher Edition.

    Hartman, Danene; And Others

    This curriculum guide contains 14 units of instruction for a course in anatomy and physiology for surgical technology students. The units cover the following topics: (1) organization of the body; (2) cells, tissues, and membranes; (3) integumentary system; (4) skeletal system; (5) muscular system; (6) nervous system; (7) special sense organs; (8)…

  12. Student Loan Collection Procedures. Revised Edition.

    McAlvey, Warren C.; Price, Anne J.

    Guidelines for loan collection staff who award/service college student loans are presented. Attention is directed to sound collection procedures, three specific loan programs, suing a defaulted borrower, the Family Educational Rights and Privacy Act and the use of credit bureaus, and student loan borrower bankruptcy. Loan collection procedures for…

  13. Colorado Academic Library Master Plan. Revised Edition.

    Johns, Claude, Jr., Ed.; Moore, Beverly, Ed.

    This master plan for Colorado academic libraries assesses current strengths and weaknesses of public and private academic libraries in the state and forecasts the role of academic libraries in support of higher education. The plan consists of a series of recommendations divided into six related and overlapping sections: access, collection…

  14. LAS Language Arts Supplement, English. Revised Edition.

    DeAvila, Edward A.; Duncan, Sharon E.

    This collection of over 100 games and activities is intended to increase oral proficiency among Spanish-speaking children without requiring reading skills. The collection grew out of the desire to provide remedies for specific linguistic weaknesses in English as identified by the Language Assessment Scales (LAS). Because tongue twisters, riddles…

  15. LAS Language Arts Supplement, Spanish. Revised Edition.

    DeAvila, Edward A.; Duncan, Sharon E.

    Like its English counterpart, this is a collection of over 100 games and activities whose intent is to increase oral proficiency without requiring reading skills. The collection grew out of the desire to provide remedies for specific linguistic weaknesses in Spanish as identified by the Language Assessment Scales. Because tongue twisters, riddles,…

  16. Radon Measurement in Schools. Revised Edition.

    Environmental Protection Agency, Washington, DC.

    The Environmental Protection Agency (EPA) and other major national and international scientific organizations have concluded that radon is a human carcinogen and a serious environmental health problem. The EPA has conducted extensive research on the presence and measurement of radon in schools. This report provides school administrators and…

  17. Analysis and Design of a 3rd Order Velocity-Controlled Closed-Loop for MEMS Vibratory Gyroscopes

    Ji-wei Jiao

    2013-09-01

    Full Text Available The time-average method currently available is limited to analyzing the specific performance of the automatic gain control-proportional and integral (AGC-PI based velocity-controlled closed-loop in a micro-electro-mechanical systems (MEMS vibratory gyroscope, since it is hard to solve nonlinear functions in the time domain when the control loop reaches to 3rd order. In this paper, we propose a linearization design approach to overcome this limitation by establishing a 3rd order linear model of the control loop and transferring the analysis to the frequency domain. Order reduction is applied on the built linear model’s transfer function by constructing a zero-pole doublet, and therefore mathematical expression of each control loop’s performance specification is obtained. Then an optimization methodology is summarized, which reveals that a robust, stable and swift control loop can be achieved by carefully selecting the system parameters following a priority order. Closed-loop drive circuits are designed and implemented using 0.35 μm complementary metal oxide semiconductor (CMOS process, and experiments carried out on a gyroscope prototype verify the optimization methodology that an optimized stability of the control loop can be achieved by constructing the zero-pole doublet, and disturbance rejection capability (D.R.C of the control loop can be improved by increasing the integral term.

  18. LabVIEW 8 student edition

    Bishop, Robert H

    2007-01-01

    For courses in Measurement and Instrumentation, Electrical Engineering lab, and Physics and Chemistry lab. This revised printing has been updated to include new LabVIEW 8.2 Student Edition. National Instruments' LabVIEW is the defacto industry standard for test, measurement, and automation software solutions. With the Student Edition of LabVIEW, students can design graphical programming solutions to their classroom problems and laboratory experiments with software that delivers the graphical programming capabilites of the LabVIEW professional version. . The Student Edition is also compatible with all National Instruments data acquisition and instrument control hardware. Note: The LabVIEW Student Edition is available to students, faculty, and staff for personal educational use only. It is not intended for research, institutional, or commercial use. For more information about these licensing options, please visit the National Instruments website at (http:www.ni.com/academic/)

  19. Results of the independent verification of radiological remedial action at 280 South 3rd East Street, Monticello, Utah (MS00099)

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1985 and 1986, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 280 South 3rd East Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  20. Results of the independent verification of radiological remedial action at 281 East 3rd South Street, Monticello, Utah (MS00138)

    In 1980 the site of a vanadium and uranium mill at Monticello, Utah, was accepted into the US Department of Energy's (DOE's) Surplus Facilities Management Program, with the objectives of restoring the government-owned mill site to safe levels of radioactivity, disposing of or containing the tailings in an environmentally safe manner, and performing remedial actions on off-site (vicinity) properties that had been contaminated by radioactive material resulting from mill operations. During 1985, UNC Geotech, the remedial action contractor designated by DOE, performed remedial action on the vicinity property at 281 East 3rd South Street, Monticello, Utah. The Pollutant Assessments Group (PAG) of Oak Ridge National Laboratory was assigned the responsibility of verifying the data supporting the adequacy of remedial action and confirming the site's compliance with DOE guidelines. The PAG found that the site successfully meets the DOE remedial action objectives. Procedures used by PAG are described. 3 refs., 2 tabs

  1. [Proceedings of the] International Conference on Educational Data Mining (EDM) (3rd, Pittsburgh, PA, July 11-13, 2010)

    Baker, Ryan S. J. d., Ed.; Merceron, Agathe, Ed.; Pavlik, Philip I., Jr., Ed.

    2010-01-01

    The Third International Conference on Data Mining (EDM 2010) was held in Pittsburgh, PA, USA. It follows the second conference at the University of Cordoba, Spain, on July 1-3, 2009 and the first edition of the conference held in Montreal in 2008, and a series of workshops within the AAAI, AIED, EC-TEL, ICALT, ITS, and UM conferences. EDM 2011…

  2. Test Review: D. Wechsler "Wechsler Individual Achievement Test" (3rd ed.). San Antonio, Texas--Pearson, 2009

    Vaughan-Jensen, Jessica; Adame, Cindy; McLean, Lauren; Gamez, Brenda

    2011-01-01

    This article reviews "Wechsler Individual Achievement Test-Third Edition" (WIAT-III), which is designed to assess students' skills in listening, speaking, reading, writing, and mathematics. The test can identify an individual's strengths and weaknesses, assist professionals who are determining whether a student is eligible for special educational…

  3. 3rd SAGA Workshop

    Conti, Giuseppe

    2014-01-01

    Mathematical algorithms are a fundamental component of Computer Aided Design and Manufacturing (CAD/CAM) systems. This book provides a bridge between algebraic geometry and geometric modelling algorithms, formulated within a computer science framework. Apart from the algebraic geometry topics covered, the entire book is based on the unifying concept of using algebraic techniques – properly specialized to solve geometric problems – to seriously improve accuracy, robustness and efficiency of CAD-systems. It provides new approaches as well as industrial applications to deform surfaces when animating virtual characters, to automatically compare images of handwritten signatures, and to improve control of NC machines. This book further introduces a noteworthy representation based on 2D contours, which is essential to model the metal sheet in industrial processes. It additionally reviews applications of numerical algebraic geometry to differential equations systems with multiple solutions and bifurcations. Futur...

  4. 3rd Dynamics Days

    Clerc, Marcel

    2016-01-01

    This book presents recent advances, new ideas and novel techniques related to the field of nonlinear dynamics, including localized pattern formation, self-organization and chaos. Various natural systems ranging from nonlinear optics to mechanics, fluids and magnetic are considered. The aim of this book is to gather specialists from these various fields of research to promote cross-fertilization and transfer of knowledge between these active research areas. In particular, nonlinear optics and laser physics constitute an important part in this issue due to the potential applications for all-optical control of light, optical storage, and information processing. Other possible applications include the generation of ultra-short pulses using all-fiber cavities.

  5. 3rd Abel Symposium

    Owren, Brynjulf

    2008-01-01

    The 2006 Abel symposium is focusing on contemporary research involving interaction between computer science, computational science and mathematics. In recent years, computation has been affecting pure mathematics in fundamental ways. Conversely, ideas and methods of pure mathematics are becoming increasingly important within computational and applied mathematics. At the core of computer science is the study of computability and complexity for discrete mathematical structures. Studying the foundations of computational mathematics raises similar questions concerning continuous mathematical structures. There are several reasons for these developments. The exponential growth of computing power is bringing computational methods into ever new application areas. Equally important is the advance of software and programming languages, which to an increasing degree allows the representation of abstract mathematical structures in program code. Symbolic computing is bringing algorithms from mathematical analysis into the...

  6. Radiation protection - general regulations. 1992 edition

    The edition 1977 of the fire brigade service regulation 9/1 has been revised completely and passed as ''edition 1992''. As far as it has not been done, the Federal uniform introduction through the countries is realized at short-term. Though the application of radioactive materials (also reactor fuels and basic material) in research, technology, medicine, additional endangering possibilities may occur for application forces in fire company service. FwDV 9/91 contains regulations according to which these dangers can be met through corresponding measures. (orig.)

  7. The levels of edit, second edition

    Vanburen, R.; Buehler, M. F.

    1980-01-01

    The editorial process is analyzed, and five levels of edit are identified. These levels represent cumulative combinations of nine types of edit: Coordination, Policy, Integrity, Screening, Copy Clarification, Format, Mechanical Style, Language, and Substantive. The levels and types of edit, although developed for specific use with external reports at the Jet Propulsion Laboratory, cover the general range of technical editing, especially as it applies to an in-house technical publications organization. Each type of edit is set forth in terms of groups of actions to be performed by editor. The edit-level concept has enhanced understanding and communication among editors, authors, and publications managers concerning the specific editorial work to be done on each manuscript. It has also proved useful as a management tool for estimating and monitoring cost.

  8. Wikipedia editing dynamics

    Gandica, Y.; Carvalho, J.; Sampaio dos Aidos, F.

    2015-01-01

    A model for the probabilistic function followed in editing Wikipedia is presented and compared with simulations and real data. It is argued that the probability of editing is proportional to the editor's number of previous edits (preferential attachment), to the editor's fitness, and to an aging factor. Using these simple ingredients, it is possible to reproduce the results obtained for Wikipedia editing dynamics for a collection of single pages as well as the averaged results. Using a stochastic process framework, a recursive equation was obtained for the average of the number of edits per editor that seems to describe the editing behavior in Wikipedia.

  9. Wikipedia edition dynamics

    Gandica, Y; Carvalho, J

    2014-01-01

    A model for the probabilistic function followed in Wikipedia edition is presented and compared with simulations and real data. It is argued that the probability to edit is proportional to the editor's number of previous editions (preferential attachment), to the editor's fitness and to an ageing factor. Using these simple ingredients, it is possible to reproduce the results obtained for Wikipedia edition dynamics for a collection of single pages as well as the averaged results. Using a stochastic process framework, a recursive equation was obtained for the average of the number of editions per editor that seems to describe the editing behaviour in Wikipedia.

  10. Marine botany. Second edition

    Dawes, C.J. [Univ. of South Florida, Tampa, FL (United States)

    1998-12-01

    Marine plants are a diverse group that include unicellular algae, seaweeds, seagrasses, salt marshes, and mangrove forests. They carry out a variety of ecological functions and serve as the primary producers in coastal wetlands and oceanic waters. The theme that connects such a wide variety of plants is their ecology, which was also emphasized in the 1981 edition. The goal of this revision is to present taxonomic, physiological, chemical, and ecological aspects of marine plants, their adaptations, and how abiotic and biotic factors interact in their communities. The data are presented in a concise, comparative manner in order to identify similarities and differences between communities such as salt marsh and mangroves or subtidal seaweeds and seagrasses. To accomplish this, the text is organized into five chapters that introduce the marine habitats, consider abiotic and biotic factors, and anthropogenic influences on the communities followed by seven chapters that deal with microalgae, seaweeds, salt marshes, mangroves, seagrasses, and coral reefs. Two appendixes are included; one presents simple field techniques and the other is a summary of seaweed uses.

  11. Early Acute Antibody-Mediated Rejection of a Negative Flow Crossmatch 3rd Kidney Transplant with Exclusive Disparity at HLA-DP

    Mierzejewska, Beata; Schroder, Paul M.; Baum, Caitlin E.; Blair, Annette; Smith, Connie; Duquesnoy, Rene J.; Marrari, Marilyn; Gohara, Amira; Malhotra, Deepak; Kaw, Dinkar; Liwski, Robert; Rees, Michael A.; Stepkowski, Stanislaw

    2014-01-01

    Donor-specific alloantibodies (DSA) to HLA-DP may cause antibody-mediated rejection (AMR), especially in re-transplants. We describe the immunization history of a patient who received 3 kidney transplants; the 3rd kidney was completely matched except at DPA1 and DPB1. Prior to the 3rd transplant, single antigen bead analysis (SAB) showed DSA reactivity against DPA1 shared by the 1st and 3rd donors, but B and T flow crossmatch (FXM) results were negative. Within 11 days the 3rd transplant underwent acute C4d+ AMR which coincided with the presence of complement (C1q)-binding IgG1 DSA against donor DPA1 and DPB1. Using HLAMatchmaker and SAB, we provide evidence that eplet (epitope) spreading on DPA1 and eplet sharing on differing DPB1 alleles of the 1st and 3rd transplants was associated with AMR. Since weak DSA to DPA1/DPB1 may induce acute AMR with negative FXM, donor DPA1/DPB1 high resolution typing should be considered in sensitized patients with DP-directed DSA. PMID:24755353

  12. 3rd Quarter Transportation Report FY 2014: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 3rd quarter of Fiscal Year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  13. [The Original Formulation for Toso-shu (Tusujiu), Created by the 3rd Century Chinese Physician, Hua Tuo].

    Mouri, Chika; Mikage, Masayuki

    2015-01-01

    The original formulation for "Tusujiu," which Japanese people still consume on the morning of January 1st, was created by Hua Tuo, but has not been studied in detail. The book Huatuo Shenyi Bizhuan, found in 1918, describes a concoction, "Biyijiu," that shows great similarity to the current Tusujiu; the ingredients for Biyijiu being rhubarb, atractylodes rhizome, cinnamon bark, platycodon root, zanthoxylum fruit, processed aconite root and smilax rhizome. The procedures for preparing and drinking it are to "pound the ingredients and then put them into a silk bag dyed with madder. During the daytime of the last day of the year, hang the bag in a well to soften the powder. Take the bag out early in the morning of the next day, the first day of the year. Heat the bag in fermented liquor until simmering. Drink the liquid with all family members, doing so while facing east. If one person drinks it, there will be no disease in the family. If the whole family drinks it, there will be no disease in their neighborhood in an area of one square 'li'. In this study, to determine the original formulation for Tusujiu, we examined a number of ancient medical texts from the 3rd to the 13th century that discuss Biyijiu and Tusujiu. As a result, we concluded that "Biyijiu" is likely to be the original formulation developed by Hua Tuo. PMID:26427101

  14. From Bottom to Top: Identification to Precision Measurement of 3rd-Generation Quarks with the ATLAS Detector

    AUTHOR|(INSPIRE)INSPIRE-00335926

    The 3rd-generation quarks, bottom ($b$) and top ($t$), are recent additions to the Standard Model of particle physics, and precise characterization of their properties have important implications to searching for new physics phenomena. This thesis presents two analyses which use 4.6 fb$^{-1}$ of $pp$ collision data at $\\sqrt{s} = 7$ TeV collected by the ATLAS detector at the Large Hadron Collider (LHC) to measure their properties. The first is an analysis which measures our ability to identify jets originating from $b$ quarks with machine-learning algorithms applied to simulated and real data, so the result in simulation can be corrected to match that in data. This measurement has implications for our ability to identify processes with b quarks in their final state; $t$ quarks decay to a $b$ quark and a weak vector boson $W$ more than 99% of the time. The second analysis presented measures properties of the $t \\rightarrow Wb$ decay channel associated with phenomena not predicted by the Standard Model, through...

  15. Evaluation of a model of dissertation supervision for 3rd year B.Sc. undergraduate nursing students.

    Scholefield, Donna; Cox, Georgina

    2016-03-01

    All English universities now offer an all degree undergraduate nursing programme. Many currently use an individual supervision model to support final year dissertation students, but with increased numbers and limited resources new models of supervision are needed. This study evaluated a mixed (group and individual) model of dissertation supervision to determine its effectiveness for a large group of undergraduate nursing students. A sample of 3rd year students and their supervisors were selected from one large university. An evaluation survey was conducted using anonymous internet-based questionnaires and focus groups. The data was analysed using Survey Monkey, SPSS and thematic analysis. A 51% (n = 56/110) response rate (students) and 65% (n = 24/37) for supervisors was obtained. The majority of students and supervisors were satisfied with the new model. There was a mixed response to the group workshops and supervision groups. Three themes emerged from the qualitative data: engaging with the process, motivation to supervise and valuing the process. The supervision process is a struggle but both parties gained considerably from going through the process. In conclusion, a mixed model of supervision together with a range of other learning resources can be an effective approach in supporting students through the dissertation process. PMID:26700648

  16. Sublexical spelling deficits in German 3rd graders with developmental language impairment: the effects of phonological-awareness training

    Jürgen Cholewa

    2013-12-01

    Full Text Available Numerous treatment studies conducted with dyslexic children from divergent alphabetic systems support the assumption that phonological awareness and consequently alphabetic reading and spelling can be trained effectively in preschool and during the first two years of literacy acquisition. However, for older primary school children acquiring a transparent orthography, such as German, these training approaches are considered to be ineffective, because in these languages the comparably simple relations between phonemes and graphemes can be understood even by most dyslexic children up to the end of the second grade. In this paper evidence is provided that this optimistic prediction should not be generalized to all subgroups of dyslexic/dysgraphic children in German. The 26 dyslexic German 3rd graders from specialized schools for children with developmental speech and language impairments who participated in a treatment study showed severe difficulties when they were asked to write simple pseudowords based on dictation or to segment these pseudowords phonemically. Even after 10 hours of training with one of two different treatment approaches the performance of these children in writing and analyzing pseudowords only improved to a limited extent and remained far below an age appropriate level. Consequences for the development of more efficacious methods to help improve the alphabetic spelling skills of German children with particularly severe and persistent orthographic and phonological difficulties are discussed.

  17. 3rd Quarter Transportation Report FY 2014: Radioactive Waste Shipments to and from the Nevada National Security Site (NNSS)

    Gregory, Louis [National Security Technologies, LLC. (NSTec), Mercury, NV (United States)

    2014-09-20

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the 3rd quarter of Fiscal Year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  18. The 3rd Canadian Symposium on Hepatitis C Virus: Expanding Care in the Interferon-Free Era

    Sonya A MacParland

    2014-01-01

    Full Text Available Hepatitis C virus (HCV currently infects approximately 250,000 individuals in Canada and causes more years of life lost than any other infectious disease in the country. In August 2011, new therapies were approved by Health Canada that have achieved higher response rates among those treated, but are poorly tolerated. By 2014/2015, short-course, well-tolerated treatments with cure rates >95% will be available. However, treatment uptake is poor due to structural, financial, geographical, cultural and social barriers. As such, ‘Barriers to access to HCV care in Canada’ is a crucial topic that must be addressed to decrease HCV disease burden and potentially eliminate HCV in Canada. Understanding how to better care for HCV-infected individuals requires integration across multiple disciplines including researchers, clinical services and policy makers to address the major populations affected by HCV including people who inject drugs, baby boomers, immigrants and Aboriginal and/or First Nations people. In 2012, the National CIHR Research Training Program in Hepatitis C organized the 1st Canadian Symposium on Hepatitis C Virus (CSHCV in Montreal, Quebec. The 2nd CSHCV was held in 2013 in Victoria, British Columbia. Both symposia were highly successful, attracting leading international faculty with excellent attendance leading to dialogue and knowledge translation among attendees of diverse backgrounds. The current article summarizes the 3rd CSHCV, held February 2014, in Toronto, Ontario.

  19. The 3rd Canadian Symposium on Hepatitis C Virus: expanding care in the interferon-free era.

    MacParland, Sonya A; Bilodeau, Marc; Grebely, Jason; Bruneau, Julie; Cooper, Curtis; Klein, Marina; Sagan, Selena; Choucha, Norma; Balfour, Louise; Bialystok, Frank; Krajden, Mel; Raven, Jennifer; Roberts, Eve; Russell, Rodney; Houghton, Michael; Tyrrell, D Lorne; Feld, Jordan J

    2014-10-01

    Hepatitis C virus (HCV) currently infects approximately 250,000 individuals in Canada and causes more years of life lost than any other infectious disease in the country. In August 2011, new therapies were approved by Health Canada that have achieved higher response rates among those treated, but are poorly tolerated. By 2014⁄2015, short-course, well-tolerated treatments with cure rates >95% will be available. However, treatment uptake is poor due to structural, financial, geographical, cultural and social barriers. As such, 'Barriers to access to HCV care in Canada' is a crucial topic that must be addressed to decrease HCV disease burden and potentially eliminate HCV in Canada. Understanding how to better care for HCV-infected individuals requires integration across multiple disciplines including researchers, clinical services and policy makers to address the major populations affected by HCV including people who inject drugs, baby boomers, immigrants and Aboriginal and⁄or First Nations people. In 2012, the National CIHR Research Training Program in Hepatitis C organized the 1st Canadian Symposium on Hepatitis C Virus (CSHCV) in Montreal, Quebec. The 2nd CSHCV was held in 2013 in Victoria, British Columbia. Both symposia were highly successful, attracting leading international faculty with excellent attendance leading to dialogue and knowledge translation among attendees of diverse backgrounds. The current article summarizes the 3rd CSHCV, held February 2014, in Toronto, Ontario. PMID:25314353

  20. Altered differential hemocyte count in 3rd instar larvae of Drosophila melanogaster as a response to chronic exposure of Acephate

    Rajak Prem

    2015-06-01

    Full Text Available Acephate, an organophosphate (OP pesticide, was used to investigate the effects of its chronic exposure on hemocyte abundance in a non-target dipteran insect Drosophila melanogaster. For this purpose, six graded concentrations ranging from 1 to 6 μg/ml were selected, which are below the reported residual values (up to 14 μg/ml of the chemical. 1st instar larvae were fed with these concentrations up to the 3rd instar stage and accordingly hemolymph smears from these larvae were prepared for differential hemocyte count. Three types of cells are found in Drosophila hemolymph, namely, plasmatocytes, lamellocytes and crystal cells. Plasmatocyte count was found to decrease with successive increase in treatment concentrations. Crystal cells showed an increasing trend in their number. Though the number of lamellocytes was very low, a bimodal response was noticed. Lamellocyte number was found to increase with the initial three concentrations, followed by a dose dependent reduction in their number. As hemocytes are directly linked to the immune system of fruit flies, fluctuations in normal titer of these cells may affect insect immunity. Hemocytes share homologies in their origin and mode of action with the immune cells of higher organisms including man. Thus the present findings suggest that immune cells of humans and other organisms may be affected adversely under chronic exposure to Acephate.

  1. Effects of using relaxation breathing training to reduce music performance anxiety in 3rd to 6th graders.

    Su, Yu-Huei; Luh, Jer-Junn; Chen, Hsin-I; Lin, Chao-Chen; Liao, Miin-Jiun; Chen, Heng-Shuen

    2010-06-01

    The current study examined the effects of applying relaxation breathing training (RBT) as a means to reduce music performance anxiety (MPA) in young, talented musicians. A group of 59 young musicians from 3rd to 6th grade participated in this study, and all of them started RBT twice a week for 2 months prior to the examination. Four tests--2 mos, 1 mos, half an hour and 5 min before the examination--were conducted to examine the level of MPA after the application of RBT. Results show that the degree of MPA 5 min before the trial was lower than the degree of performance anxiety half an hour before the jury (t = -3.683, p < 0.01), which indicated that the RBT was associated with a decrease in MPA. Although a series of RBT exercises was applied, results indicated that when approaching the date of examination, the degree of performance anxiety still increased and reached its maximum half an hour before the jury. The recommendation for future studies is to combine the application of RBT with other methods to expand its effect in reducing MPA. PMID:20795337

  2. Palaeopathology of human remains of the 1st century BC–3rd century AD from Armenia (Beniamin, Shirakavan I

    Khudaverdyan Anahit Yu.

    2015-06-01

    Full Text Available The aim of this article was to document the pathology of the individuals from the archeological sites of Beniamin and Shirakavan I, Armenia, dated on the 1st century BC - 3rd century AD. The findings revealed that two groups differed in mean age at death of adults. At Beniamin it was 24 years, 40.8 years for males and 30.9 years for females, whereas at Shirakavanit it was 29.3 years, 29.6 years for males and 35.8 years for females. The greatest mortality appeared to have occurred when the children reached the age of one year (Beniamin. The population had high number of young-adult females with a cause of death associated with child-bearing. Very few females survived to old age. Traumatic conditions (63.64% and enamel hypoplasias (57.2% have a high frequency in the skeletal material from Shirakavan. The volume of selection of Shirakavan does not allow itself to so big discussion as it was possible with the Beniamin site. Fewer hypoplasias in Beniamin group indicate that food resources were more abundant and more easily exploited. The small frequency of a periodontal disorder indicates that dental hygiene was good during the Antiquity period. We here report a case of possible pituitary dwarfism and a case of decapitation.

  3. Transmission Electron Microscopy and Diffractometry of Materials (Third Edition)

    Fultz, Brent; Howe, James M.

    2007-01-01

    This book explains concepts of transmission electron microscopy (TEM) and x-ray diffractometry (XRD) that are important for the characterization of materials. The third edition has been updated to cover important technical developments, including the remarkable recent improvement in resolution of the TEM. This edition is not substantially longer than the second, but all chapters have been updated and revised for clarity. A new chapter on high resolution STEM methods has been added. The book e...

  4. [The Washington summit: orange light for genome editing?].

    Jordan, Bertrand

    2016-02-01

    The summit organised in early December 2015 considered in depth the various issues (technical, scientific, societal and ethical) raised by the prospect of genome editing using the extremely effective CRISPR system. Germline editing (for therapeutic or "enhancement" purposes) was stated to be irresponsible under current conditions, but the possibility that this could be considered in the future was not excluded; a mechanism for monitoring progress and possibly revising recommendations was proposed. PMID:26936181

  5. Edit wars in Wikipedia

    Sumi, Róbert; Yasseri, Taha; Rung, András; Kornai, András; Kertész, János

    2011-01-01

    We present a new, efficient method for automatically detecting severe conflicts `edit wars' in Wikipedia and evaluate this method on six different language WPs. We discuss how the number of edits, reverts, the length of discussions, the burstiness of edits and reverts deviate in such pages from those following the general workflow, and argue that earlier work has significantly over-estimated the contentiousness of the Wikipedia editing process.

  6. Analysis of time-variant quadratic phase couplings in the tracé alternant EEG by recursive estimation of 3rd-order time-frequency distributions.

    Helbig, Marko; Schwab, Karin; Leistritz, Lutz; Eiselt, Michael; Witte, Herbert

    2006-10-15

    The quantification of transient quadratic phase couplings (QPC) by means of time-variant bispectral analysis is a useful approach to explain several interrelations between signal components. A generalized recursive estimation approach for 3rd-order time-frequency distributions (3rd-order TFD) is introduced. Based on 3rd-order TFD, time-variant estimations of biamplitude (BA), bicoherence (BC) and phase bicoherence (PBC) can be derived. Different smoothing windows and local moment functions for an optimization of the estimation properties are investigated and compared. The methods are applied to signal simulations and EEG signals, and it can be shown that the new time-variant bispectral analysis results in a reliable quantification of QPC in the tracé alternant EEG of healthy neonates. PMID:16737739

  7. Hip Revision

    Full Text Available ... pretty much all these revisions, I try and use the largest head size possible, just for our ... of Trabecular Metal in your revisions? Do you use it selectively, or do you use it all ...

  8. Hip Revision

    Full Text Available ... in that situation. He's also got a tantalum modular revision or -- excuse me -- a tantalum revision shell ... more straightforward, I tend to use just the modular shell. With a lot of shells we're ...

  9. Hip Revision

    Full Text Available ... actually able to remop and put a Trabecular Metal Revision Shell in place. And we got a ... instability. Scott, what is your role of Trabecular Metal in your revisions? Do you use it selectively, ...

  10. Revising Translations

    Rasmussen, Kirsten Wølch; Schjoldager, Anne

    2011-01-01

    survey. Results clearly show that most translation companies regard both unilingual and comparative revisions as essential components of professional quality assurance. Data indicate that revision is rarely fully comparative, as the preferred procedure seems to be a unilingual revision followed by a more...... or less comparative rereading. Though questionnaire data seem to indicate that translation companies use linguistic correctness and presentation as the only revision parameters, interview data reveal that textual and communicative aspects are also considered. Generally speaking, revision is not...... carried out by specialised revisers, but by staff translators, who revise the work of colleagues and freelancers on an ad hoc basis. Corrections are mostly given in a peer-to-peer fashion, though the work of freelancers and inexperienced in-house translators is often revised in an authoritative...

  11. Organizational Support for the 3rd Summer Institute on Complex Plasmas, July 30 – August 8, 2012

    Lopez, Jose L. [Seton Hall University

    2012-07-01

    This grant provided partial funds for American graduate students to attend the 3rd Graduate Summer Institute on Complex Plasmas, which was held from July 30 to August 8, 2012 at Seton Hall University in South Orange, New Jersey. The Graduate Summer Institute is a topical series of instructional workshops held bi-annually on the emerging field of complex plasmas that is jointly organized through a collaboration between American and German-European Union plasmas researchers. This specialized program brings together many of the world's leading researchers in the specialized area of complex plasmas, who freely provide instructional lectures and tutorials on the most recent research and discoveries done in this branch of plasma science. The partial funds provided by this grant helped support the travel and accommodation expenses of the participating American students and tutorial instructors. Partial funds further supported the travel and accommodation of three renown American plasma researchers that provided educational tutorials to the thirty-eight participating students from the United States, Europe, and Asia. The organized program afforded a unique opportunity for the participating American graduate students to learn about and engage more deeply in an area of plasma science that is not studied in any of the graduate educational curriculums provided by universities in the United States of America. The educational experience offered by this program provided the necessary knowledge needed by future American plasma researchers to keep the national plasma research effort on the cutting-edge and keep the national plasma community as a global leader.

  12. When should orthostatic blood pressure changes be evaluated in elderly: 1st, 3rd or 5th minute?

    Soysal, Pinar; Aydin, Ali Ekrem; Koc Okudur, Saadet; Isik, Ahmet Turan

    2016-01-01

    Detection of orthostatic hypotension (OH) is very important in geriatric practice, since OH is associated with mortality, ischemic stroke, falls, cognitive failure and depression. It was aimed to determine the most appropriate time for measuring blood pressure in transition from supine to upright position in order to diagnose OH in elderly. Comprehensive geriatric assessment (CGA) including Head up Tilt Table (HUT) test was performed in 407 geriatric patients. Orthostatic changes were assessed separately for the 1st, 3rd and 5th minutes (HUT1, HUT3 and HUT5, respectively) taking the data in supine position as the basis. The mean age, recurrent falls, presence of dementia and Parkinson's disease, number of drugs, alpha-blocker and anti-dementia drug use, and fasting blood glucose levels were significantly higher in the patients with versus without OH; whereas, albumin and 25-hydroxy vitamin D levels were significantly lower (p<0.05). However, different from HUT3 and HUT5, Charlson Comorbidity Index and the prevalence of diabetes mellitus were higher, the use of antidiabetics, antipsychotics, benzodiazepine, opioid and levodopa were more common (p<0.05). Statistical significance of the number of drugs and fasting blood glucose level was prominent in HUT1 as compared to HUT3 (p<0.01, p<0.05). Comparison of the patients that had OH only in HUT1, HUT3or HUT5 revealed no difference in terms of CGA parameters. These results suggests that orthostatic blood pressure changes determined at the 1st minute might be more important for geriatric practice. Moreover, 1st minute measurement might be more convenient in the elderly as it requires shorter time in practice. PMID:27077324

  13. A Comparison of Low IQ Scores from the Reynolds Intellectual Assessment Scales and the Wechsler Adult Intelligence Scale--Third Edition

    Umphress, Thomas B.

    2008-01-01

    Twenty people with suspected intellectual disability took the Reynolds Intellectual Assessment Scales (RIAS; C. R. Reynolds & R. W. Kamphaus, 1998) and the Wechsler Adult Intelligence Scale--3rd Edition (WAIS-III; D. Wechsler, 1997) to see if the 2 IQ tests produced comparable results. A t test showed that the RIAS Composite Intelligence Index…

  14. Arrangements for transition from the 1985 edition (as amended 1990) to the 1996 edition of the IAEA Transport Regulations

    The purpose of this publication is to provide guidance to National Competent Authorities to facilitate compliance during, and after, transition from the previous edition of the International Atomic Energy Agency's (IAEA's) Transport Regulations (Safety Series No. 6, 1985 Edition, as Amended 1990) to the 1996 editions (TS-R-1 [ST-1, Revised], in English; ST-1 in French, Russian and Spanish) of the regulations. This may also provide guidance to other users of the IAEA's Transport Regulations such as consignors, carriers, consignees, owners and designers and fabricators of radioactive material and package designers and fabrications

  15. Design of control system for the 2nd and 3rd charge exchange system in J-PARC 3GeV RCS

    J-PARC 3GeV Synchrotron Accelerator is using method of charge exchange injection using three carbon foils. In order to achieve this injection, three charge exchange devices installed in this facility. These devices are controlled by one control system. The 2nd and 3rd charge exchange devices are upgrading to increase maintainability and exhaust ability of the vacuum unit, and the control system has reconsidered. Basic policy of redesigning the control system is separated from centralized control system of the three devices, and we reconstruct the control system that independent from the centralized control system. On this condition, we are upgrading of the 2nd and 3rd charge exchange device. It is necessary to redesign the interlock unit about safety, because of being stand-alone control. Now, the error signal of the charge exchange unit consolidates the error signal of three devices, and it operates the Machine Protection System (MPS). Therefore, we needed long time to search occasion why the error happened. However, the MPS will be operated by the error signal on each unit, we hope it makes a difference to search occasion easily. The 2nd and 3rd charge exchange units adopt a simple control system using Yokogawa electric PLC FA-M3. We are designing of the control system with safety that fuses the drive unit and the vacuum unit. This report is about design of the 2nd and 3rd charge exchange unit control system that reconstructed the hardware of their unit. (author)

  16. for video describing a prestigious Government of Canada prize which the Canadian team in ALPHA will be awarded on February 3rd

    2013-01-01

    Footage for video describing a prestigious Government of Canada prize which the Canadian team in ALPHA will be awarded on February 3rd 2014. On the video: -Mic-Michael Hayden (Simon Fraser Univ.) -Walter Hardy (Univ. of British Columbia) -Andrea Capra (York Univ.)hael Hayden (Simon Fraser Univ.)

  17. The 3rd CARISMA international conference on medium and high temperature proton exchange membrane fuel cells: Three approaches to better platinum catalysts at biannual conference

    Jensen, Jens Oluf; Cleemann, Lars Nilausen; Li, Qingfeng

    2013-01-01

    The 3rd CARISMA International Conference was held at the Axelborg venue in Copenhagen, Denmark, from September 3-5, 2012. The CARISMA conference series was specifically devoted to challenges in the development and testing of fuel cell materials and membrane electrode assemblies (MEAs) for proton...

  18. The "Unknown" Marx's Capital, Volume I: The French Edition of 1872-75, 100 Years Later

    Kevin Anderson

    1983-01-01

    None of the existing English editions of Marx's Capital, Vol. I, including the new Ben Fowkes translation published by Penguin in 1976, fully incorporate the text as revised by the author for his 1872-75 French edition. These omitted or alternate texts cover the subjects of the role of private property in capitalism, alienation and unskilled factory work, capitalist crises, unemployment, and imperialism. Finally, the French edition of Capital is viewed briefly in the overall context of the wr...

  19. PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

    Gaol, F. L.

    2015-06-01

    The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19

  20. PREFACE: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science 2015 (AeroEarth 2015)

    Gaol, F. L.

    2016-02-01

    The 3rd International Conferences on Geological, Geographical, Aerospaces and Earth Sciences 2015 (AeroEarth 2015), was held at The DoubleTree Hilton, Jakarta, Indonesia during 26 - 27 September 2015. The 1st AeoroEarth was held succefully in Jakarta in 2013. The success continued to The 2nd AeroEarth 2014 that was held in Kuta Bali, Indonesia. The publications were published by EES IOP in http://iopscience.iop.org/1755-1315/19/1 and http://iopscience.iop.org/1755-1315/23/1 respectively. The AeroEarth 2015 conference aims to bring together researchers, engineers and scientists from around the world. Through research and development, Earth's scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. The theme of AeroEarth 2015 is ''Earth and Aerospace Sciences : Challenges and Opportunities'' Earth provides resources and the exact conditions to make life possible. However, with the advent of technology and industrialization, the Earth's resources are being pushed to the brink of depletion. Non-sustainable industrial practices are not only endangering the supply of the Earth's natural resources, but are also putting burden on life itself by bringing about pollution and climate change. A major role of earth science scholars is to examine the delicate balance between the Earth's resources and the growing demands of industrialization. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 78 papers and after rigorous review, 18 papers were accepted. The participants

  1. Fuel Cell Handbook, Fourth Edition

    Stauffer, D.B; Hirschenhofer, J.H.; Klett, M.G.; Engleman, R.R.

    1998-11-01

    Robust progress has been made in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in January 1994. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultra high efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 6 describe the four major fuel cell types and their performance based on cell operating conditions. The section on polymer electrolyte membrane fuel cells has been added to reflect their emergence as a significant fuel cell technology. Phosphoric acid, molten carbonate, and solid oxide fuel cell technology description sections have been updated from the previous edition. New information indicates that manufacturers have stayed with proven cell designs, focusing instead on advancing the system surrounding the fuel cell to lower life cycle costs. Section 7, Fuel Cell Systems, has been significantly revised to characterize near-term and next-generation fuel cell power plant systems at a conceptual level of detail. Section 8 provides examples of practical fuel cell system calculations. A list of fuel cell URLs is included in the Appendix. A new index assists the reader in locating specific information quickly.

  2. New Mandates and Imperatives in the Revised "ACA Code of Ethics"

    Kaplan, David M.; Kocet, Michael M.; Cottone, R. Rocco; Glosoff, Harriet L.; Miranti, Judith G.; Moll, E. Christine; Bloom, John W.; Bringaze, Tammy B.; Herlihy, Barbara; Lee, Courtland C.; Tarvydas, Vilia M.

    2009-01-01

    The first major revision of the "ACA Code of Ethics" in a decade occurred in late 2005, with the updated edition containing important new mandates and imperatives. This article provides interviews with members of the Ethics Revision Task Force that flesh out seminal changes in the revised "ACA Code of Ethics" in the areas of confidentiality,…

  3. The Autism Diagnostic Observation Schedule, Module 4: Revised Algorithm and Standardized Severity Scores

    Hus, Vanessa; Lord, Catherine

    2014-01-01

    The recently published Autism Diagnostic Observation Schedule, 2nd edition (ADOS-2) includes revised diagnostic algorithms and standardized severity scores for modules used to assess younger children. A revised algorithm and severity scores are not yet available for Module 4, used with verbally fluent adults. The current study revises the Module 4…

  4. Using Technology with Classroom Instruction that Works. Second Edition

    Kuhn, Matt; Hubbell, Elizabeth R.; Pitler, Howard

    2012-01-01

    If you've upgraded to the second edition of the landmark book "Classroom Instruction That Works," you need this companion guide to help you use technology to support research-based instruction. The authors follow the revised Instructional Planning Guide that makes it easier for you to know when to emphasize each of the instructional strategies,…

  5. 75 FR 42786 - Accounting Guide for LSC Recipients (2010 Edition)

    2010-07-22

    ... practices and internal control practices; reviewing the annual IRS Form 990 for completeness, accuracy, and... Accounting Guide for LSC Recipients (2010 Edition) AGENCY: Legal Services Corporation. ACTION: Notice. SUMMARY: The Legal Services Corporation (LSC) is revising the Accounting Guide for LSC Recipients...

  6. Advanced Technology in Teaching : Proceedings of the 2009 3rd International Conference on Teaching and Computational Science, v.1

    Intelligent Ubiquitous Computing and Education

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Teaching and Computational Science (WTCS 2009) held on December 19- 20, 2009, Shenzhen, China.   WTCS 2009 best papers Volume 1 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Intelligent Ubiquitous Computing and Education to disseminate their latest research results and exchange views on the future research directions of these fields. 128 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Wu.   On behalf of the WTCS 2009, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Intelligent Ubiquitous Computing and Education.

  7. Advanced Technology in Teaching : Proceedings of the 2009 3rd International Conference on Teaching and Computational Science, v.2

    Education, Psychology and Computer Science

    2012-01-01

    The volume includes a set of selected papers extended and revised from the International Conference on Teaching and Computational Science (WTCS 2009) held on December 19- 20, 2009, Shenzhen, China.   WTCS 2009 best papers Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Education, Psychology and Computer Science to disseminate their latest research results and exchange views on the future research directions of these fields. 128 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof. Wu.   On behalf of the WTCS 2009, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Education, Psychology and Computer Science. 

  8. 对新世纪《中药学》教材(第二版)修改的建议%Suggestions on Revising New Century Traditional Chinese Pharmacology(The Second Edition)

    苗彦霞

    2011-01-01

    This paper analyzes some problems that lie in the textbook new century Traditional Chinese Pharmacology ( the second edition ) designed by the national universities of Chinese medicine. As for the adaptation of the textbook, the author recommends that editors lay greater emphasis on the following points including language conciseness, accuracy of conceptions, coherence of logics and standardization of terminologies.%分析了新世纪全国高等中医药院校规划教材《中药学》(第二版)存在的一些问题,建议教材的编写应进一步注意语言精练,概念准确,逻辑自洽以及术语的规范.

  9. Coming 5th Edition of the API Standard 618: major changes compared to the API 618, 4th edition

    Pyle, A.; Eijk, A.; Elferink, H.

    2003-01-01

    This paper will present the highlights of changes that will be found in the 5th Edition of API 618, which is expected to be published in late 2003 or early 2004. Approximately every 5 years the API Standards are revised in such a way that the latest field experiences and proven designs are included

  10. The construction of the CMS electromagnetic calorimeter: delivery of the 3rd and 4th endcap "Dees" and Ring Flanges to CERN

    2006-01-01

    Delivery of the 3rd and 4th Dees and Ring Flanges of the CMS-ECAL endcaps to CERN. The pictures show also an endcap crystal with its VPT (Vacuum PhotoTriode), the aluminium blackplates of the endcap Dees and four mock supercrystals (5x5 crystals) attached in their position on the backplate, along with 138 positional spacers. Finally, endcap assembly in the CMS construction hall in Cessy (neighbouring France) is also shown.

  11. Medical students’ skills in image interpretation before and after training: A comparison between 3rd-year and 6th-year students from two different medical curricula

    The purpose of this study was to assess student's performance in the interpretation of images before and after training in radiology, by comparing two groups, 6th-year and 3rd-year students, from two different medical curricula. Students participated in an anonymous evaluation consisting of the interpretation of 12 radiological images accompanied with the salient history and clinical data by answering 60 open-ended questions about technique, anatomy, semiology, and clinics. The number of correct, incorrect and blank responses of each group was used to compare pre- and post-training results. Unpaired two-sample t-test was used to evaluate differences between groups. A significant increase in correct responses was found in both groups after training. The comparison between both groups did not show differences for incorrect answers of the whole test and correct answers about anatomy in the pre-training evaluation. The percentage of correct answers to the median question improved from 15.5% to 53.3% for 6th-year students and from 8.3% to 41.1% for 3rd-year students. The post-training evaluation showed a significant increase of correct answers of 6th-year students with respect to 3rd-year students (mean ± standard deviation 53.6 ± 31.3% and 38.7 ± 29.9% respectively), mainly due to differences in technical and clinical questions. This study provides objective and quantitative evidence of pre- and post-training student skills in image interpretation. The similarities found in the previous level of knowledge and skills of both groups emphasizes the suitable change of the first-time training in radiology, from the 6th to the 3rd year course in medical curricula.

  12. New aspects in the Bragg Glass-Disordered phase transition: an analysis based on the 3rd harmonics of the AC magnetic susceptibility

    Adesso*, M. G.; Flukiger, R.; Giamarchi, T.; Goldacker, W.; H.; Kupfer; Pace, S.; Polichetti, M.; Uglietti, D.

    2007-01-01

    We analyse the phase transition between the Bragg Glass and the Disordered phase in the vortex lattice in type-II superconductors, both by analytical computations and experimental investigations. It is known that if the Peak Effect can be detected, a Bragg Glass/Disordered phase transition takes place. We show that, in some conditions, this transition can occur without the observation of the Peak Effect Phenomenon. We introduce a method based on the 3rd harmonics of the AC magnetic susceptibi...

  13. Medical students’ skills in image interpretation before and after training: A comparison between 3rd-year and 6th-year students from two different medical curricula

    Sendra-Portero, Francisco, E-mail: sendra@uma.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain); Torales-Chaparro, Oscar E., E-mail: oetjft@terra.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain); Ruiz-Gómez, Miguel J., E-mail: mjrg@uma.es [Departamento de Radiología y Medicina Física, Facultad de Medicina, Universidad de Málaga, Boulevar Louis Pasteur, 32, 29071 Málaga (Spain)

    2012-12-15

    The purpose of this study was to assess student's performance in the interpretation of images before and after training in radiology, by comparing two groups, 6th-year and 3rd-year students, from two different medical curricula. Students participated in an anonymous evaluation consisting of the interpretation of 12 radiological images accompanied with the salient history and clinical data by answering 60 open-ended questions about technique, anatomy, semiology, and clinics. The number of correct, incorrect and blank responses of each group was used to compare pre- and post-training results. Unpaired two-sample t-test was used to evaluate differences between groups. A significant increase in correct responses was found in both groups after training. The comparison between both groups did not show differences for incorrect answers of the whole test and correct answers about anatomy in the pre-training evaluation. The percentage of correct answers to the median question improved from 15.5% to 53.3% for 6th-year students and from 8.3% to 41.1% for 3rd-year students. The post-training evaluation showed a significant increase of correct answers of 6th-year students with respect to 3rd-year students (mean ± standard deviation 53.6 ± 31.3% and 38.7 ± 29.9% respectively), mainly due to differences in technical and clinical questions. This study provides objective and quantitative evidence of pre- and post-training student skills in image interpretation. The similarities found in the previous level of knowledge and skills of both groups emphasizes the suitable change of the first-time training in radiology, from the 6th to the 3rd year course in medical curricula.

  14. Proceedings of the 3rd Biennial Conference of the Society for Implementation Research Collaboration (SIRC) 2015: advancing efficient methodologies through community partnerships and team science

    Kerns, Suzanne; Puspitasari, Ajeng; Hendricks, Karin; Pierson, Andria; Fizur, Phil; Comtois, Katherine A.; Green, Amy E; Trott, Elise M.; Willging, Cathleen E.; Fernandez, Maria E.; Woolf, Nicholas H.; Liang, Shuting Lily; Heredia, Natalia I.; Kegler, Michelle; Risendal, Betsy

    2016-01-01

    Table of contents Introduction to the 3rd Biennial Conference of the Society for Implementation Research Collaboration: advancing efficient methodologies through team science and community partnerships Cara Lewis, Doyanne Darnell, Suzanne Kerns, Maria Monroe-DeVita, Sara J. Landes, Aaron R. Lyon, Cameo Stanick, Shannon Dorsey, Jill Locke, Brigid Marriott, Ajeng Puspitasari, Caitlin Dorsey, Karin Hendricks, Andria Pierson, Phil Fizur, Katherine A. Comtois A1: A behavioral economic perspective ...

  15. Food Micro 2010, 22th International ICFMH Symposium, “ Microbial Behaviour in the Food Chain ” 30th August – 3rd September 2010, Copenhagen, Denmark

    2012-01-01

    This Special Issue of International Journal of Food Microbiology contains a selection of papers presented at Food Micro 2010, the 22th Symposium of the International Committee on Food Microbiology and Hygiene (ICFMH). Food Micro 2010 was held on 30th August to 3rd September 2010 in Copenhagen......, Denmark and organized in collaboration between the Danish Centre for Advanced Food Studies (LMC) and Lund University in Sweden....

  16. Orthotics, prosthesis and mobility aids (OPM) dispensation in the Regional Health Department of the 3RD Region of Sao Paulo State

    Camila Caminha Caro; Paloma Soares Pereira Faria; Tatiana Barbieri Bombarda; Iracema Serrat Vergotti Ferrigno; Marina Silveira Palhares

    2014-01-01

    Objective: To identify the process of dispensation of orthotics, prostheses and mobility aids (OPM) by the Unified Health System (SUS) in the Regional Health Department of the 3rd Region (DRSIII) of Sao Paulo state; perform a mapping of the existing physical rehabilitation services in that region; and subsequently correlate the data with applicable laws. Methodology: This is an exploratory cross-sectional qualitative study whose subjects were the main professionals involved in the process ...

  17. Quality text editing

    Gyöngyi Bujdosó

    2009-10-01

    Full Text Available Text editing is more than the knowledge of word processing techniques. Originally typographers, printers, text editors were the ones qualified to edit texts, which were well structured, legible, easily understandable, clear, and were able to emphasize the coreof the text. Time has changed, and nowadays everyone has access to computers as well as to text editing software and most users believe that having these tools is enough to edit texts. However, text editing requires more skills. Texts appearing either in printed or inelectronic form reveal that most of the users do not realize that they are not qualified to edit and publish their works. Analyzing the ‘text-products’ of the last decade a tendency can clearly be drawn. More and more documents appear, which instead of emphasizingthe subject matter, are lost in the maze of unstructured text slices. Without further thoughts different font types, colors, sizes, strange arrangements of objects, etc. are applied. We present examples with the most common typographic and text editing errors. Our aim is to call the attention to these mistakes and persuadeusers to spend time to educate themselves in text editing. They have to realize that a well-structured text is able to strengthen the effect on the reader, thus the original message will reach the target group.

  18. The Art of Electronics - 2nd Edition

    Horowitz, Paul; Hill, Winfield

    1989-09-01

    This is the thoroughly revised and updated second edition of the hugely successful The Art of Electronics. Widely accepted as the single authoritative text and reference on electronic circuit design, both analog and digital, the original edition sold over 125,000 copies worldwide and was translated into eight languages. The book revolutionized the teaching of electronics by emphasizing the methods actually used by citcuit designers - a combination of some basic laws, rules to thumb, and a large nonmathematical treatment that encourages circuit values and performance. The new Art of Electronics retains the feeling of informality and easy access that helped make the first edition so successful and popular. It is an ideal first textbook on electronics for scientists and engineers and an indispensable reference for anyone, professional or amateur, who works with electronic circuits. The best self-teaching book and reference book in electronics Simply indispensable, packed with essential information for all scientists and engineers who build electronic circuits Totally rewritten chapters on microcomputers and microprocessors The first edition of this book has sold over 100,000 copies in seven years, it has a market in virtually all research centres where electronics is important

  19. Revision Notes

    Matthewson, Siobhan; Debbadi, Margaret

    2012-01-01

    Revision Notes: CCEA ICT for GCSE has been written by experienced teachers and examiners so that you can be confident that it covers only the facts and ideas you will be expected to recall and use in the exam. - Essential facts are carefully organised to make revising easier. - Exams tips show you how to avoid losing marks and get the best grade. - Check your understanding questions support you in the run-up to the exams, with answers provided free online at www.hodderplus.co.uk. This book will help you plan and pace your revision to suit your learning needs and can be integrated with other re

  20. Cell and molecular biology. 8th Edition

    De Robertis

    1987-01-01

    Extensively revised and reorganized, this edition can be considered a new book. The chapters on the cell membrane, cell interactions, cytoskeleton and cell motility, cell secretion, interphase nucleus, the genetic code and genetic engineering, transcription and processing of RNA, ribosomes and protein synthesis, gene regulation and differentiation are completely rewritten. More than half of the 504 illustrations are new. The discussions are concise and easy to read. Each chapter offers an introduction to the broad objectives of that chapter and concluding summary paragraphs which underscore the important points.

  1. Hip Revision

    Full Text Available ... I think that's a good thing -- especially in these cases where there's a fair bit of bone ... to be putting in here. You know, on these revisions, Todd, I don't know what your ...

  2. Hip Revision

    Full Text Available Hip Revision Featuring the ZMR® Hip System Tapered Distal Stem Zimmer, Inc. Winfield, Illinois September 3, 2009 Welcome to this OR Live webcast presentation, brought to you by Zimmer. ...

  3. Hip Revision

    Full Text Available ... Revision Featuring the ZMR® Hip System Tapered Distal Stem Zimmer, Inc. Winfield, Illinois September 3, 2009 Welcome ... a hybrid hip arthroplasty with a cemented femoral stem and an acetabular shell. You can see the ...

  4. CRISPR Genome Editing

    A research article about a technique for gene editing known as CRISPR-Cas9. The technique has made it much easier and faster for cancer researchers to study mutations and test new therapeutic targets.

  5. The comparison of salivary level of estrogen and progesterone in 1 st , 2 nd and 3 rd trimester in pregnant women with and without geographic tongue

    Parichehr Ghalayani

    2013-01-01

    Full Text Available Background: Geographic tongue (GT was first reported as a wandering rash of the tongue in 1831; however, its etiopathogenesis remains unclear. Increased prevalence of GT has been documented in the pregnancy. The aim of this study was to compare the level of salivary estrogen and progesterone in pregnant women with and without GT. Materials and Methods: This analytical-descriptive study consisted of 26 pregnant women (13 with GT, 13 without GT with an age range between 18 years and 45 years. The estrogen and progesterone level was measured during 1 st , 2 nd and 3 rd trimester of pregnancy. Saliva sampling was performed to determine the level of sex hormones. The samples were stored at -80°C and determined by Eliza method. The results were analyzed by t-test and repeated measure ANOVA (α = 0.05. Results: The mean level of estrogen for control and case group was 49.4and 52.33 in the 1 st , 71.05 and 74.12 in the 2 nd and 109.1 and 112.16 in the 3 rd trimester respectively. The mean level of progesterone was 0.72 and 0.72 in the 1 st , 1.14 and 1.21 in the 2 nd and 1.3 and 1.28 in the 3 rd trimester of pregnancy for the control and case groups respectively. Even though, there was no significant difference regarding the level of sex hormones between case and control groups (P > 0.05, but the difference between the level of these hormones during 3 trimesters of pregnancy was significant in each group (P = 0.001. Conclusion: The level of sex hormones is not the only etiologic factor of GT in pregnant women, but other factors such as genetic potential, human leukocyte antigen marker and stress may aggravate the incidence of this lesion.

  6. Irradiation experiments of 3rd, 4th and 5th fuel assemblies by an in-pile gas loop, OGL-1

    Three irradiation experiments for 3rd, 4th and 5th fuel assemblies which had been composed of VHTR reference coated particle fuels and graphite components were carried out by an in-pile gas loop, OGL-1 during 1979 and 1982. The main purposes of these experiments were to study on bowing of the fuel rod by irradiation for the 3rd fuel assembly, to study on fuel behavior under relatively low burnup irradiation for the 4th fuel assembly, and to study on fuel behavior up to full burnup of VHTR design for the 5th fuel assembly. For understanding in-pile fuel behavior, fractional releases of fission gases from each fuel assembly were estimated by measuring the fission gas concentrations in the primary loop of OGL-1. The post-irradiation examination (PIE) was carried out extensively on the fuel block, the fuel rods and the fuel compacts in Tokai Hot Laboratory. Also, made were the measurements of metallic fission product distributions in the fuel assemblies and the fuel rods. The results in these experiments were given as follows ; bowing of the fuel rod in the 3rd fuel assembly was 0.7 mm, but integrity of the rod was kept under irradiation. Fractional release of the fission gas from the 4th fuel assembly remained in the order of 10-7 during irradiation, suggesting that the fuel performance was excellent. The fractional release from the 5th fuel assembly, on the other hand, was in the order of 10-5 which was the same level in the VHTR design. (author)

  7. Highly efficient source for frequency-entangled photon pairs generated in a 3rd order periodically poled MgO-doped stoichiometric LiTaO3 crystal

    Kim, Heonoh; Lee, Sang Min; Moon, Han Seb

    2015-01-01

    We present a highly efficient source for discrete frequency-entangled photon pairs based on spontaneous parametric down-conversion using 3rd order type-0 quasi-phase matching in a periodically poled MgO-doped stoichiometric LiTaO3 crystal pumped by a 355.66 nm laser. Correlated two-photon states were generated with automatic conservation of energy and momentum in two given spatial modes. These states have a wide spectral range, even under small variations in crystal temperature, which consequently results in higher discreteness. Frequency entanglement was confirmed by measuring two-photon quantum interference fringes without any spectral filtering.

  8. Searching for new gamma-ray blazar candidates in the 3rd Palermo BAT Hard X-ray Catalog with WISE

    Maselli, A.; Massaro, F.; Cusumano, G.; D'Abrusco, R.; La Parola, V.; Paggi, A.; Segreto, A.; Smith, Howard A.; Tosti, G

    2013-01-01

    We searched for gamma-ray blazar candidates among the 382 unidentified hard X-ray sources of the 3rd Palermo BAT Catalog (3PBC) obtained from the analysis of 66 months of SWIFT-BAT survey data and listing 1586 sources. We adopted a recently developed association method based on the peculiar infrared colors which characterize the gamma-ray blazars included in the second catalog of active galactic nuclei detected by the Fermi Large Area Telescope (2LAC). We used this method exploiting the data ...

  9. 21st Century Strategies for Protected Areas in East Asia--Briefs of the 3rd Conference on Conservative Land in East Asia

    ZHANG Zurong

    2001-01-01

    @@ The author had the opportunity to attend the 3rd Conference on the Conservative Land in East Asia in Seoul, Korea in September 1999, whose theme was " 21st Century Strategies for Protected Areas in East Asia". As the majority of protected areas in China is located in mountain areas,since the government announced prohibition of any commercial wood cutting, all mountains have become sort of protected areas in a certain degree. The following is a brief introduction on the major issues discussed at the conference.

  10. Brief Report: An Exploratory Study Comparing Diagnostic Outcomes for Autism Spectrum Disorders under DSM-IV-TR with the Proposed DSM-5 Revision

    Gibbs, Vicki; Aldridge, Fiona; Chandler, Felicity; Witzlsperger, Ellen; Smith, Karen

    2012-01-01

    The proposed revision for Autism spectrum disorders (ASDs) in the Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (DSM-5) represents a shift from the Diagnostic and Statistical Manual of Mental Disorders-Fourth Edition, Text Revision (DSM-IV-TR). As the proposed DSM-5 criteria require a higher minimum number of symptoms to be…

  11. Fuel Cell Handbook, Fifth Edition

    Energy and Environmental Solutions

    2000-10-31

    Progress continues in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in November 1998. Uppermost, polymer electrolyte fuel cells, molten carbonate fuel cells, and solid oxide fuel cells have been demonstrated at commercial size in power plants. The previously demonstrated phosphoric acid fuel cells have entered the marketplace with more than 220 power plants delivered. Highlighting this commercial entry, the phosphoric acid power plant fleet has demonstrated 95+% availability and several units have passed 40,000 hours of operation. One unit has operated over 49,000 hours. Early expectations of very low emissions and relatively high efficiencies have been met in power plants with each type of fuel cell. Fuel flexibility has been demonstrated using natural gas, propane, landfill gas, anaerobic digester gas, military logistic fuels, and coal gas, greatly expanding market opportunities. Transportation markets worldwide have shown remarkable interest in fuel cells; nearly every major vehicle manufacturer in the U.S., Europe, and the Far East is supporting development. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultrahigh efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 8 describe the six major fuel cell types and their performance based on cell operating conditions. Alkaline and intermediate solid state fuel cells were added to this edition of the Handbook. New information indicates that manufacturers have stayed

  12. Orthotics, prosthesis and mobility aids (OPM dispensation in the Regional Health Department of the 3RD Region of Sao Paulo State

    Camila Caminha Caro

    2014-12-01

    Full Text Available Objective: To identify the process of dispensation of orthotics, prostheses and mobility aids (OPM by the Unified Health System (SUS in the Regional Health Department of the 3rd Region (DRSIII of Sao Paulo state; perform a mapping of the existing physical rehabilitation services in that region; and subsequently correlate the data with applicable laws. Methodology: This is an exploratory cross-sectional qualitative study whose subjects were the main professionals involved in the process of OPM dispensation, or responsible for their acquisition flow in the cities of that region. Data collection was carried out through a semi-structured questionnaire, developed by the researchers themselves, composed of questions aiming to identify the physical rehabilitation centers in the towns, the staff members involved, the provision of assistive technology through SUS, delivery time and existence of waiting lists. Results and discussion: The data were statistically measured, categorized, described and correlated with the current legislation aimed to guarantee access to assistive technology. We observed that the practice around this resource in the 3rd region concentrates in a single care center, causing long waits and poor efficiency of the services provided, in addition to maintaining a paternalistic aspect. Conclusion: This study provides evidence that, although the right to access to assistive technology is legally guaranteed, there are still many difficulties and challenges around this practice.

  13. [An overview on the collation and revision of medical books by the Bureau for Revising Medical Books in the Northern Song Dynasty].

    Meng, Yongliang; Liang, Yongxuan

    2014-07-01

    The Bureau for Revising Medical Books was a temporary agency established by the government of the Northern Song Dynasty in 1057, the 2nd year of Jiayou of Emperor Renzong, exclusively for the edition, revision and publishing of ancient medical books. 11 medical books were revised and edited by 13 Bureau members in a period of 12 years until 1069, the 2nd year of Xining of Emperor ShenZong, which eventually became the final versions until today. 8 medical books were initially planned for the revision, but 11 were actually completed in the end. The time for completing a revision varied from over 10 years at most to less than 1 year at least. Instead of working in the office, the officers of the Bureau for Revising Medical Books did their works at home. The members of the said Bureau came from the Tiju officer of the Bureau for Revising Medical Books and the officials of revising medical books, consisting of both Confucian ministers and medical officers. Confucian ministers played an important role in revising medical books. The Bureau had a strict workflow in electing revising officials, making the project, and the determination of the principles and arrangements of the tasks of editing and proofreading. PMID:25429879

  14. The genome editing revolution

    Stella, Stefano; Montoya, Guillermo

    2016-01-01

    In the last 10 years, we have witnessed a blooming of targeted genome editing systems and applications. The area was revolutionized by the discovery and characterization of the transcription activator-like effector proteins, which are easier to engineer to target new DNA sequences than the previo......In the last 10 years, we have witnessed a blooming of targeted genome editing systems and applications. The area was revolutionized by the discovery and characterization of the transcription activator-like effector proteins, which are easier to engineer to target new DNA sequences than...... sequence). This ribonucleoprotein complex protects bacteria from invading DNAs, and it was adapted to be used in genome editing. The CRISPR ribonucleic acid (RNA) molecule guides to the specific DNA site the Cas9 nuclease to cleave the DNA target. Two years and more than 1000 publications later, the CRISPR......-Cas system has become the main tool for genome editing in many laboratories. Currently the targeted genome editing technology has been used in many fields and may be a possible approach for human gene therapy. Furthermore, it can also be used to modifying the genomes of model organisms for studying human...

  15. Hip Revision

    Full Text Available ... the acetabular revision side; and hopefully by the time we've been there -- or get there -- he ... précis on what he's done up to that time. Here's Scott's initial preoperative x-ray, where we ...

  16. Hip Revision

    Full Text Available ... number one, I don't know is a clinical concern; and number two, that even if there is a little bit of fretting that occurs, we're not seeing license -- we're not seeing problems as far as from a revision standpoint necessitating us coming back in. The other question then too ...

  17. 4 August 2011 - Austrian Head of Protocol, Directorate General III, Federal Ministry of Science and Research I. Friedrich (3rd from left) in the LHC superconducting magnet test hall with M. Benedkit, C. Wulz and C. Fabjan.

    Maximilien Brice

    2011-01-01

    4 August 2011 - Austrian Head of Protocol, Directorate General III, Federal Ministry of Science and Research I. Friedrich (3rd from left) in the LHC superconducting magnet test hall with M. Benedkit, C. Wulz and C. Fabjan.

  18. Precision genome editing

    Steentoft, Catharina; Bennett, Eric P; Schjoldager, Katrine Ter-Borch Gram;

    2014-01-01

    of glycobiology, primarily due to their low efficiencies, with resultant failure to impose substantial phenotypic consequences upon the final glycosylation products. Here, we review novel nuclease-based precision genome editing techniques enabling efficient and stable gene editing, including gene disruption...... by introducing single or double-stranded breaks at a defined genomic sequence. We here compare and contrast the different techniques and summarize their current applications, highlighting cases from the field of glycobiology as well as pointing to future opportunities. The emerging potential of precision gene...

  19. Edit Distance for Timed Automata

    Chatterjee, Krishnendu; Ibsen-Jensen, Rasmus; Majumdar, Rupak

    2013-01-01

    The edit distance between two (untimed) traces is the minimum cost of a sequence of edit operations (insertion, deletion, or substitution) needed to transform one trace to the other. Edit distances have been extensively studied in the untimed setting, and form the basis for approximate matching of sequences in different domains such as coding theory, parsing, and speech recognition. In this paper, we lift the study of edit distances from untimed languages to the timed setting. We define ...

  20. Editing graphs for maximum effect

    Murphy, P.W.; Rhiner, R.W.

    1991-01-08

    The paper contains over eighty rules for editing graphs, arranged under nine major headings in a logical sequence for editing all the graphs in a manuscript. It is excerpted from a monograph used at the Lawrence Livermore National Laboratory to train beginning technical editors in editing graphs; a corresponding Hypercard stack is also used in this training. 6 refs., 4 figs.

  1. Final report for the 3rd Ex-Vessel Neutron Dosimetry Installations and Evaluations for Kori Unit 1 Reactor Pressure Vessel

    Kim, Byoung Chul; Yoo, Choon Sung; Lee, Sam Lai (and others)

    2008-03-15

    This report describes a neutron fluence assessment performed for the Kori Unit 1 pressure vessel belt line region based on the guidance specified in Regulatory Guide 1.190. In this assessment, maximum fast neutron exposures expressed in terms of fast neutron fluence (E>1 MeV) and iron atom displacements (dpa) were established for the belt line region of the pressure vessel. After Cycle 23 of reactor operation, 3rd Ex-Vessel Neutron Dosimetry Program was instituted at Kori Unit 1 to provide continuous monitoring of the belt line region of the reactor vessel. The use of the Ex-Vessel Neutron Dosimetry Program coupled with available surveillance capsule measurements provides a plant specific data base that enables the evaluation of the vessel exposure and the uncertainty associated with that exposure over the service life of the unit. Ex-Vessel Neutron Dosimetry has been evaluated at the conclusion of Cycle 24.

  2. Final Report of the 3rd Ex-Vessel Neutron Dosimetry Installation And Evaluations for Kori Unit 3 Reactor Pressure Vessel

    This report describes a neutron fluence assessment performed for the Kori Unit 3 pressure vessel belt line region based on the guidance specified in Regulatory Guide 1.190. In this assessment, maximum fast neutron exposures expressed in terms of fast neutron fluence (E>1 MeV) and iron atom displacements (dpa) were established for the belt line region of the pressure vessel. After Cycle 17 of reactor operation, 3rd Ex-Vessel Neutron Dosimetry Program was instituted at Kori Unit 3 to provide continuous monitoring of the belt line region of the reactor vessel. The use of the Ex-Vessel Neutron Dosimetry Program coupled with available surveillance capsule measurements provides a plant specific data base that enables the evaluation of the vessel exposure and the uncertainty associated with that exposure over the service life of the unit. Ex-Vessel Neutron Dosimetry has been evaluated at the conclusion of Cycle 18

  3. [Pathological diagnosis, work-up and reporting of breast cancer. Recommendations of the 3rd Hungarian Consensus Conference on Breast Cancer].

    Cserni, Gábor; Kulka, Janina; Francz, Monika; Járay, Balázs; Kálmán, Endre; Kovács, Ilona; Krenács, Tibor; Udvarhelyi, Nóra; Vass, László

    2016-09-01

    There have been relevant changes in the diagnosis and treatment of breast cancer to implement the updating of the 2010 recommendations made during the 2nd national consensus conference on the disease. Following a wide interdisciplinary consultation, the present recommendations have been finalized after their public discussion at the 3rd Hungarian Consensus Conference on Breast Cancer. The recommendations cover non-operative and intraoperative diagnostics, the work-up of operative specimens, the determination of prognostic and predictive markers and the content of the cytology and histology reports. Furthermore, it touches some special issues such as the current status of multigene molecular markers, the role of pathologists in clinical trials and prerequisites for their involvement, some relevant points about the future. PMID:27579721

  4. 深圳天麓三区种植屋面施工技术%Shenzhen Tianlu 3rd Zone planted roof construction technology

    石伟国

    2011-01-01

    In Shenzhen Tianlu 3rd Zone Rhine Castle project, basement roof is designed as the sky garden, and it is planted roof above the waterproof layer. This paper introduces the waterproof design scheme, waterproof material characteristics, roof greening, and construction process of the planted roof.%深圳天麓三区莱茵堡项目地下室顶板设计为空中花园,防水层上为种植屋面.介绍该种植屋面防水设计方案、防水材料特点、屋面绿化及种植屋面的施工工艺.

  5. Final Report of the 3rd Ex-vessel Neutron Dosimetry Installation And Evaluations for Yonggwang Unit 1 Reactor Pressure Vessel

    This report describes a neutron fluence assessment performed for the Yonggwang Unit 1 pressure vessel beltline region based on the guidance specified in Regulatory Guide 1.190. In this assessment, maximum fast neutron exposures expressed in terms of fast neutron fluence (E>1 MeV) and iron atom displacements (dpa) were established for the beltline region of the pressure vessel. During Cycle 17 of reactor operation, 3rd Ex-Vessel Neutron Dosimetry Program was instituted at Yonggwang Unit 1 to provide continuous monitoring of the beltline region of the reactor vessel. The use of the Ex-Vessel Neutron Dosimetry Program coupled with available surveillance capsule measurements provides a plant specific data base that enables the evaluation of the vessel exposure and the uncertainty associated with that exposure over the service life of the unit. Ex-Vessel Neutron Dosimetry has been evaluated at the conclusion of Cycle 17

  6. [3rd generation's TKI in lung cancer non-small cell EGFR-mutated having acquired a secondary T790M resistance].

    Brosseau, Solenn; Viala, Marie; Varga, Andréa; Planchard, David; Besse, Benjamin; Soria, Jean-Charles

    2015-09-01

    Activating EGFR mutations discovery and efficacy of 1st generation tyrosine kinase inhibitors (TKI), such as erlotinib or gefitinib, inaugurated the beginning of personalized medicine in the treatment of EGFR-mutated non-small cell lung cancer (NSCLC). However, all patients showed a tumor progression of 10 to 16 months after the onset of TKI therapy related to molecular resistance mechanisms as T790M mutation. Till now, patients suffering from EGFR-mutated NSCLC with acquired resistance have conventional treatment options. Two new 3rd generations' TKI, AZD9291 and rociletinib, are currently being studied in phases 1-3 studies. Preliminary results show relevant therapeutic properties in patients with T790M mutated-EGFR NSCLC. This review aims to highlight these new molecules, their effectiveness and their clinical toxicities in the treatment of advanced stages of NSCLC expressing the T790M mutation. PMID:26235419

  7. An estimate of the minting method of three silver coins of the 3rd century B.C. through their microstructural study

    Pistofidis, N.; Vourlias, G. [Department of Physics, Aristotle University of Thessaloniki, Thessaloniki (Greece); Dilo, T. [Department of Physics, FNSc, University of Tirana, Tirana (Albania); Civici, N. [Department of Spectroscopy, Institute of Nuclear Physics, Tirana (Albania); Gjongecaj, Sh. [Department of Antiquity, Institute of Archaeology, Tirana (Albania); Skolianos, S. [Physical Metallurgy Laboratory, Department of mechanical Engineering, Aristotle University of Thessaloniki, 54124, Thessaloniki (Greece); Polychroniadis, E.K., E-mail: polychr@auth.g [Department of Physics, Aristotle University of Thessaloniki, Thessaloniki (Greece)

    2010-05-01

    The microstructure of three silver coins of the 3rd century B.C. from the Illyrian King Monounios and the ancient Greek cities of Dyrrachion and Corcyra, belonging to the Kreshpan hoard, was determined with X-ray diffraction and transmission electron microscopy in order to investigate their minting method. It is deduced that the coins are characterized by a large number of structural defects, mainly dislocations, twins and microtwins, which in some cases were bent. These crystal defects are common in each of the coins examined. This information allowed the formulation of a possible minting method. Since twins in FCC metals are formed with thermal treatment, and mechanical twinning is rather improbable, it seems that the coins were initially hot-worked. Bent twins indicate that working continued during cooling. Especially for the Corcyra coin it was deduced that it was treated at higher temperature or its cooling rate was lower.

  8. Seismic re-evaluation of EDF Bugey 900 PWR nuclear power plant in the frame of the 3rd periodic safety review

    Viallet, E.; Labbe, P.; Gallitre, E.; Nadjarian, A.; Vandeputte, D.; Ravet, S.; Humbert, N. [EDF - SEPTEN, 12-14 avenue Dutrievoz, 69628 Villeurbanne Cedex (France); Durouchoux, C. [EDF - TEGG, 905 Avenue du Camp de Menthe, 13097 AIX-EN-PROVENCE CEDEX 02 (France); Pascal, P.; Blanchard, M.T.; Pons, Y. [EDF - SEPTEN, 12-14 avenue Dutrievoz, 69628 Villeurbanne Cedex (France); Jadot, H., E-mail: hugo.jadot@edf.f [EDF - SEPTEN, 12-14 avenue Dutrievoz, 69628 Villeurbanne Cedex (France); Louche, V.; Nicolet, S. [EDF - CIPN, 140 Avenue Viton, 13401 Marseille Cedex 20 (France)

    2010-06-15

    As compared to the previous Periodic Safety Review (PSR), main features of the seismic facet of the Bugey NPP (France) 3rd PSR are relating to (i) a 45% increase of the Review Level Earthquake (RLE), (ii) a dramatic increase of computer code capabilities and (iii) a certain evolution of safety standards. This paper presents the method implemented to cope with this situation. Seismic input motion is determined according to an updated Basic Safety Rule published in 2001. Concerning buildings, 3D models are established, accounting for torsion effects, which were not represented by the initial design spring-mass models; analyses are carried out as per the IAEA methodology, accounting for ductile capacity through a F{sub m}u factor; finally the major impact of the seismic re-evaluation is a reinforcement of electrical building, so that it is less torsion sensitive. Regarding equipment, the concept of Safe Shutdown Equipment List (SSEL) is enlarged to all the Safety Related Equipment List (SREL). An equipment hierarchy classification is introduced, based on two complementary approaches: a system approach that identifies components associated to success paths for a safe shutdown, and a ruggedness approach that considers experience feedback about seismic behavior of components. On these bases, all the safety related equipments are classified in two categories: High Hierarchy level (HH) and Medium Hierarchy level (MH). MH equipment is mainly verified by walkdown, whereas HH equipment is by calculation, taking benefit from design margins. The optimization procedures enable to focus on the more relevant components. Bugey NPP seismic re-evaluation stands out by its realistic calculation chain and the completeness of its assessment, and eventually, the 3rd PSR is an opportunity to improve the plant safety and increase design margins.

  9. Knowledge and institutional requirements to promote land degradation neutrality in drylands - An analysis of the outcomes of the 3rd UNCCD scientific conference

    Akhtar-Schuster, Mariam; Safriel, Uriel; Abraham, Elena; de Vente, Joris; Essahli, Wafa; Escadafal, Richard; Stringer, Lindsay

    2015-04-01

    Achieving land degradation neutrality (LDN) through sustainable land management (SLM) targets the maintenance or restoration of the productivity of land, and therefore has to include decision-makers, knowledge generators and knowledge holders at the different relevant geographic scales. In order to enhance the implementation of the Convention, the Conference of the Parties (COP) of the United Nations Convention to Combat Desertification therefore decided that each future session of its Committee on Science and Technology (CST) would be organized in a predominantly scientific and technical conference-style format. This contribution will outline the major outcomes of UNCCD's 3rd scientific conference that will be held in Cancún, Mexico, from 9 to 12 March 2015, on addressing desertification, land degradation and drought issues (DLDD) for poverty reduction and sustainable development. The conference follows an exceptional new round table conference format that will allow the various stakeholders to discuss scientific as well as the contribution of traditional knowledge and practices in combating land degradation. This format should provide two-way communication and enable deeper insight into the availability and contribution of all forms of knowledge for achieving LDN through the assessment of: • the vulnerability of lands to DLDD and climate change and the adaptive capacities of socio-ecosystems; • best examples of adapted, knowledge-based practices and technologies; • monitoring and assessment methods to evaluate the effectiveness of adaptation practices and technologies. The outcomes of UNCCD's 3rd scientific conference will serve as a basis for discussing: • contributions of science to diagnose the status of land; • research gaps that need to be addressed to achieve LDN for poverty reduction; • additional institutional requirements to optimally bridge knowledge generation, knowledge maintenance and knowledge implementation at the science

  10. Beginning to edit physics

    Murphy, P.W.

    1995-02-01

    A physicist-turned-editor shows you the basics required for copyediting physics papers (physical quantities, symbols, units, scientific notation, the structure of mathematical expressions, the nature of graphs), and points the way to learning enough ``editorial physics`` to begin substantive editing.

  11. ISBD Consolidated Edition

    Section, Standing Committee of the IFLA Cataloguing

    2011-01-01

    This is the new edition of the first consolidated ISBD that was published in 2007. The first years of usage have led to interesting and useful corrections and additions. Many cataloguers and practitioners worldwide will welcome this updated first class tool, which is useful and applicable for descriptions of bibliographic resources in any type of catalogue.

  12. The Craft of Editing

    Moeran, Brian

    To edit is to make a choice, or series of choices. Will I write a rough draft of this essay in longhand, or hammer it out on my computer? If the latter, what font shall I use? Times New Roman, Book Antiqua, or Garamond? Once I get started, what style shall I adopt: realistic, confessional or...

  13. Preface to Special Edition

    Renee Nathanson

    2012-01-01

    Given that reading comprehension is at the forefront of global literacy discourse, this special edition of Per Linguam, the first number that is also published online, features a collection of articles that cover different aspects of reading comprehension and instruction, such as, strategies for comprehending texts, metacognitive awareness, the reciprocity of assessment and comprehension instruction and socio-affective factors that influence comprehension.

  14. Tokamaks (Second Edition)

    The first edition of John Wesson's book on tokamaks, published in 1987, established itself as essential reading for researchers in the field of magnetic confinement fusion: it was an excellent introduction for students to tokamak physics and also a valuable reference work for the more experienced. The second edition, published in 1997, has been completely rewritten and substantially enlarged (680 pages compared with 300). The new edition maintains the aim of providing a simple introduction to basic tokamak physics, but also includes discussion of the substantial advances in fusion research during the past decade. The new book, like its predecessor, is well written and commendable for its clarity and accuracy. In fact many of the chapters are written by a series of co-authors bringing the benefits of a wide range of expertise but, by careful editing, Wesson has maintained a uniformity of style and presentation. The chapter headings and coverage for the most part remain the same - but are expanded considerably and brought up to date. The most substantial change is that the single concluding chapter in the first edition on 'Experiments' has been replaced by three chapters: 'Tokamak experiments' which deals with some of the earlier key experiments plus a selection of recent small and medium-sized devices, 'Large experiments' which gives an excellent summary of the main results from the four large tokamaks - TFTR, JET, JT60/JT60U and DIII-D, and 'The future' which gives a very short (possibly too short in my opinion) account of reactors and ITER. This is an excellent book, which I strongly recommend should have a place - on the desk rather than in the bookshelf - of researchers in magnetic confinement fusion. (book review)

  15. 3rd International Algebra Conference

    Fong, Yuen; Zelmanov, Efim

    2003-01-01

    This volume contains one invited lecture which was presented by the 1994 Fields Medal­ ist Professor E. Zelmanov and twelve other papers which were presented at the Third International Conference on Algebra and Their Related Topics at Chang Jung Christian University, Tainan, Republic of China, during the period June 26-July 1, 200l. All papers in this volume have been refereed by an international referee board and we would like to express our deepest thanks to all the referees who were so helpful and punctual in submitting their reports. Thanks are also due to the Promotion and Research Center of National Science Council of Republic of China and the Chang Jung Christian University for their generous financial support of this conference. The spirit of this conference is a continuation of the last two International Tainan­ Moscow Algebra Workshop on Algebras and Their Related Topics which were held in the mid-90's of the last century. The purpose of this very conference was to give a clear picture of the rece...

  16. Edit Distance for Pushdown Automata

    Chatterjee, Krishnendu; Henzinger, Thomas A.; Ibsen-Jensen, Rasmus; Otop, Jan

    2015-01-01

    The edit distance between two words $w_1, w_2$ is the minimal number of word operations (letter insertions, deletions, and substitutions) necessary to transform $w_1$ to $w_2$. The edit distance generalizes to languages ${\\cal L}_1, {\\cal L}_2$, where the edit distance is the minimal number $k$ such that for every word from ${\\cal L}_1$ there exists a word in ${\\cal L}_2$ with edit distance at most $k$. We study the edit distance computation problem between pushdown automata and their subclas...

  17. Arrangements for transition from the 1985 edition (as amended 1990) to the 1996 edition of the IAEA Transport Regulations

    In December 1996 the International Atomic Energy Agency published the 1996 Edition of the Regulations for the Safe Transport of Radioactive Material (formerly Safety Series No. 6) in a document called ST-1. That document has served as the basis for revising the UN Committee of Experts Recommendations on the Safe Transport of Dangerous Goods (published in 1999 as ''Model Regulations''), and as the basis for the Class 7 portions of the forthcoming revisions of RID, ADR, IMO (IMDG Code), ICAO (Technical Instructions) and IATA modal dangerous goods regulations. ST-1 was subsequently reviewed and revised with minor editorial corrections, and in 2000, a revised English version of the regulations called TS-R-1 (ST-1, Revised) was published. Difficulties may arise when applying the Regulations during the transition from the 1985 Edition of the Transport Regulations to the 1996 Edition of these regulations. These difficulties come mainly from the differences between the two sets of regulations, e.g. the definition of radioactive material with the new nuclide specific exemption levels, the new values of A1/A2, the annual dose limits, the related documentation, the labelling requirements for fissile material package, the changes in UN numbers and proper shipping names, the shipment of fissile material by air, etc. This TECDOC is intended to provide guidance on the implementation of changes in the Regulations for the Safe Transport of Radioactive Material. This guidance may be used to facilitate compliance with the Regulations. This guidance is aimed at all users of the regulations including National Competent Authorities, consignors, consignees and carriers

  18. A Warm Welcome to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition?

    Razzaghi, Emran Mohammad

    2014-01-01

    The present article discusses the reaction of psychiatric professionals and specifically the academia in Iran to the publication of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition, (DSM-5). It is argued that the reaction to changes and the approach of the new revision of DSM has been neither technical, nor emotional. This argument has further been examined for the previous revisions of the DSM and the conclusion is that the Iranian psychiatry has become alienated from...

  19. 77 FR 66650 - Proposed Revisions to Radiation Protection

    2012-11-06

    ...The U.S. Nuclear Regulatory Commission (NRC or the Commission) is revising the following sections in Chapter 12, ``Radiation Protection'' and soliciting public comment on NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR Edition,'' Section 12.1, ``Assuring that Occupational Radiation Exposures Are As Low As Is Reasonably Achievable,''......

  20. Cognitive Conflicts and Resolutions in Online Text Revisions: Three Profiles

    Yang, Yu-Fen

    2010-01-01

    This study investigates how college students solve their cognitive conflicts when receiving peers' suggestions and corrections in online text revision. A sample of 45 undergraduate students were recruited to read their peer writers' texts, edit peer writers' errors, evaluate peer editors' corrections and suggestions, and finally rewrite their own…

  1. Toxicity considerations when revising the Nordic nutrition recommendations.

    Sandström, B

    1998-02-01

    The Nordic countries have issued common nutrition recommendations since 1980. In connection with the 3rd revision, a joint working group of nutritionists and toxicologists assessed the toxicology of selected trace elements. Values for upper limits of intake were established for iron, zinc, iodine and selenium. The safety factors between the lowest intakes at which adverse effects had been reported and the suggested upper limits of intake were small. In the toxicological evaluation of upper safe intake levels of essential trace elements, interactions between trace elements as well as long-term exposure to moderately elevated trace element intakes have to be considered. PMID:9478028

  2. Technical committee meeting to revise the regulations for the safe transport of radioactive material. Chairman's report

    Technical Committee Meeting 405.9 was the first meeting of the new two year revision cycle. This meeting was charged not only with beginning the preparation of the next edition of the IAEA Transport Regulations but also with defining many of the roles, responsibilities, procedures, and guidelines involved in the new revision process. This document presents the revision process and summarises the changes recommended by working groups and accepted by Plenary approval process. List of participants is provided in an annex

  3. Admissible and Restrained Revision

    Booth, R; 10.1613/jair.1874

    2011-01-01

    As partial justification of their framework for iterated belief revision Darwiche and Pearl convincingly argued against Boutiliers natural revision and provided a prototypical revision operator that fits into their scheme. We show that the Darwiche-Pearl arguments lead naturally to the acceptance of a smaller class of operators which we refer to as admissible. Admissible revision ensures that the penultimate input is not ignored completely, thereby eliminating natural revision, but includes the Darwiche-Pearl operator, Nayaks lexicographic revision operator, and a newly introduced operator called restrained revision. We demonstrate that restrained revision is the most conservative of admissible revision operators, effecting as few changes as possible, while lexicographic revision is the least conservative, and point out that restrained revision can also be viewed as a composite operator, consisting of natural revision preceded by an application of a "backwards revision" operator previously studied by Papini. ...

  4. Non-proliferation under revision

    At the 3rd NPT Revision Conference held in Geneva between August 27 and September 21, 1985, the member states to the Treaty reconfirmed their conviction that the agreement had become an essential part in the efforts to secure peace in the world and that is fundamental objectives continued to serve this purpose. Since the ratification in 1968 and the entering into force in 1970 of the Non-proliferation Treaty, the number of member states had risen continually to, at present, 130. In 1975, 92 states in 1980, 114 states had signed the agreement. The three nuclear weapon states, USA, UK, and USSR, are depositary states. France acts as if she had acceded to the Treaty, and the People's Republic of China as the 5th nuclear weapon state seems to take steps in the same direction by voluntarily opening nuclear installations to checks by IAEA inspectors. Incidentally, an effective framework of non-proliferation in the South American region has been created in the Treaty of Tlatelolco. 98% of all nuclear installations in the non-nuclear weapon countries are covered by IAEA safeguards. (orig.)

  5. Psychology. 5th edition

    Martin, G. Neil; Carlson, Neil R.; Buskist, William

    2013-01-01

    A comprehensive, lively and engaging introduction to the fascinating study of the subject. The fifth edition of the best-selling Psychology is a contemporary text that will captivate all psychology students. The authors describe and explore every major area of psychology and present the latest findings, along with clear evaluation of controversial theories and models, to give a rigorous and critical grounding in the subject. Over 420 new references in this thoroughly updated fifth editi...

  6. Commercial Pilot Airplane Written Test Guide. Revised Edition.

    Federal Aviation Administration (DOT), Washington, DC. Flight Standards Service.

    This guide is intended to help applicants prepare for the Commercial Airplane Pilot Written Test. The guide outlines the aeronautical knowledge requirements for a commercial pilot, informs the applicant of source material that can be used to acquire their knowledge, and includes test items and illustrations representative of those used in the…

  7. Private Pilot Airplane Written Test Guide. Revised Edition.

    Federal Aviation Administration (DOT), Washington, DC. Flight Standards Service.

    This guide is intended to assist persons preparing to take the written test for the private airplane pilot rating. Guidance is offered on what to expect on the FAA-administered test. Recommendations for study material are presented. Samples of test forms are included and 119 pages of sample questions are provided. (RE)

  8. Living in Italy. Intercultural Exchange Series. Revised Edition.

    Hawkinson, Annie

    The guide provides a brief introduction to the culture and language of Italy, and is designed for visitors, students, and business travelers. It offers practical information on various aspects of daily living, including: money; food; restaurants; hotels; postal and telecommunications services; transportation; shopping; health and medical care;…

  9. Science Project Ideas about Kitchen Chemistry. Revised Edition.

    Gardner, Robert

    This book presents science experiments that can be conducted in the kitchen. Contents include: (1) "Safety First"; (2) "Chemistry in and Near the Kitchen Sink"; (3) "Chemistry in the Refrigerator"; (4) "Chemistry on the Stove"; (5) "Chemistry on the Kitchen Counter"; and (6) "Further Reading and Internet Addresses." (YDS)

  10. Waste-to-energy compendium: Revised 1982 edition

    1982-08-01

    This report surveys 49 waste-to-energy recovery projects throughout the United States. Included are ten refuse-derived fuel (RDF) production facilities, eight RDF user facilities, five combined RDF production-user facilities, and 26 mass burning facilities ith energy recovery. Only those facilities that are fully operational or those in advanced stages of startup and shakedown are surveyed. Information is provided on processing capacities, operation and maintenance problems, equipment specifications, capital and operating costs, and the current status of each facility. In addition, process flow schematics are provided for each of the ten RDF production plants and the five RDF production-user plants.

  11. Zuyder Zee/Lake Ijssel. Third Revised Edition.

    Meijer, Henk, Comp.

    This excursion guide describes the Zuyder Zee project which dammed and partially drained a low coastal area of the northern Netherlands. The guide also provides itineraries and other practical information for visitors to the area. It is one of a series of publications developed by the Information and Documentation Center for the Geography of the…

  12. The Complete Handbook of Science Fair Projects, Revised Edition.

    Bochinski, Julianne Blair

    Science fairs have become an important key to gathering valuable science experience while pursuing independent projects. This book serves as a guide to every aspect of science fairs and science fair projects. It provides information on finding suitable topics, researching them properly, developing experiments, and giving meaning to data results.…

  13. Planning, Promoting and Passing School Tax Issues. [Revised Edition].

    Whitman, Robert L.; Pittner, Nicholas A.

    This book provides Ohio citizens with information on school tax issues and levy campaigning. The material is presented in a structural step-by-step process that lends itself to the practical application for preparing a levy. This book is a guide to understanding various tax issues, tax reduction factors, and the changing tax duplicate that affects…

  14. Economic Education. Curriculum Guide. Kindergarten-12. Revised Edition.

    Oklahoma Curriculum Improvement Commission, Oklahoma City.

    The document offers practical and motivating techniques for helping students achieve economic literacy. The activities are designed to develop competency for effective citizenship as a consumer, a worker making occupational choices, and a voter on socioeconomic issues. The material in the elementary section discusses economic wants, scarcity and…

  15. The Instructional Guide for Abbott Skills Enhancement Classes. Revised Edition.

    Ballinger, Ronda; Gee, Mary Kay

    This guide, which integrates adult basic education (ABE) curriculum, job skills for Abbott Laboratories, and work-related foundation skills, is designed for an instructional program in the skill areas of reading, writing, oral communications, mathematics, and problem solving. In addition to creating a uniform process and product to promote…

  16. Bread in a Bag. Teacher's Packet. Revised Edition.

    Oklahoma State Dept. of Education, Oklahoma City.

    This unit is designed to familiarize students in grades 3-6 with wheat production; teach them the nutritional value of wheat products and their role in a well-balanced diet; and give then an easy, hands-on experience in bread making with a nominal amount of cleanup for teachers. The kit suggests that in the first week, teachers discuss wheat…

  17. How We Get Pictures from Space, Revised Edition

    Haynes, Robert

    1987-01-01

    The past 25 years of space travel and exploration have generated an unprecedented quantity of data from planetary systems. Data gathered at close range, and from above the distorting effects of Earth's atmosphere, produce images far more detailed than pictures taken by even the largest Earth-bound telescopes. The techniques used to acquire and process these images are discussed briefly.

  18. Arizona State Capitol Museum. Teacher Resource Guide. Revised Edition.

    Arizona State Dept. of Library, Archives and Public Records, Phoenix.

    Information about Arizona's history, government, and state capitol is organized into two sections. The first section presents a timeline of Arizona history from the prehistoric era to 1992. Brief descriptions of the state's entrance into the Union and the city of Phoenix as the selection for the State Capitol are discussed. Details are given about…

  19. BIS Handbook: An Organizational Manual & Directory. Revised Edition.

    Association of Coll. and Research Libraries, Chicago, IL. Bibliographic Instruction Section.

    This handbook was prepared for the officers and committee members of the ACRL (Association of College and Research Libraries) Bibliographic Instruction Section (BIS). Introductory material by Mimi Dudley and James W. Hart traces the history of bibliographic instruction (BI) and the development of BIS. Following a brief discussion of how to get…

  20. Recommended Collections for Prison Law Libraries. Revised Edition.

    American Association of Law Libraries, Chicago, IL.

    The American Association of Law Libraries has published a two-part bibliography containing: (1) a list of legal material for a minimum collection in both a state and federal prison, and (2) an expanded list, including court decisions starting in 1950. Also included are a publishers directory for legal resources and a listing of required shelf…

  1. Algorithms, Computation and Mathematics (Fortran Supplement). Teacher's Commentary. Revised Edition.

    Charp, Sylvia; And Others

    This is the teacher's guide and commentary for the SMSG textbook Algorithms, Computation, and Mathematics (Fortran Supplement). The teacher's commentary provides background information for the teacher, suggestions for activities found in the Fortran Supplement, and answers for exercises and activities. The course is designed for high school…

  2. Elementary Accounting. A Programed Text. Revised. Edition Code-3.

    Army Finance School, Fort Benjamin Harrison, IN.

    This programed text is designed to teach the basic elements of the double entry system of accounting, including basic terms, procedures, definitions, and principles used. The text consists of frames, which are sequenced instructional steps and, in most cases, are composed of two parts. The first part states a fact or relates information and asks a…

  3. Better Speeches in Ten Simple Steps. Revised 2nd Edition.

    Robinson, James W.

    Acknowledging that the fear of public speaking is widespread, this book guides the reader/communicator through 10 steps of writing and presenting a speech. The book is based on the idea that solid preparation and following a few basic rules makes public speaking easier and the finished product more dynamic. The book is divided into the following…

  4. The Waiter and Waitress Training Manual. Revised Edition.

    Mitchell, Barbara J.

    This manual is intended for use in pre-employment or upgrading training programs for persons who are planning to work or are presently working in the hotel and restaurant food service industry. Eleven chapters cover interpersonal relationships with employers, fellow employees, and customers; grooming and personal hygiene; sanitary food handling;…

  5. Management of Chronic Infectious Diseases in School Children. Revised Edition.

    Illinois State Board of Education, Springfield.

    This manual contains current guidelines for Illinois school personnel to follow when working with children who have infectious diseases. The first chapter focuses on school district development of policies and procedures and program implementation. The next chapter provides information on characteristics, mode of transmission, prevention, and…

  6. Calculus, Part 3, Teacher's Commentary, Unit No. 71. Revised Edition.

    Beck, A.; And Others

    This is part three of a three-part manual for teachers using SMSG high school text materials. The overall purpose for each of the chapters is described and the mathematical development detailed. Background information for key concepts and answers for all exercises in each chapter are provided. Chapter topics include: (1) vectors and curves; (2)…

  7. Classroom Creature Culture: Algae to Anoles. Revised Edition.

    Hampton, Carolyn H.; And Others

    Identifying and providing the most appropriate classroom environment for living organisms can be time consuming, expensive, and sometimes seemingly impossible. This document, a collection of 2-4 page articles from "Sciences and Children," provides useful information on the collecting and culturing of plants and animals. Among the 43 chapters are:…

  8. Primary Treatment and Sludge Digestion Workshop. Second Edition (Revised).

    Ontario Ministry of the Environment, Toronto.

    This manual was developed for use at workshops designed to upgrade the knowledge of experienced wastewater treatment plant operators. Each of the sixteen lessons has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. The body of the text provides content information, procedure outlines,…

  9. Life Science, A Process Approach, Second Edition: Revised, 1970.

    Phare, Wayne; And Others

    Seventeen scientific processes are identified and annotated; some suggestions for activities to demonstrate them are given. These processes are used as headings in the teacher's guide to succeeding units on biological classifications, microbiology, physiology of plants and animals, chick embryology and ecology. Similar headings are usually used in…

  10. Learning about Sex: Resource Guide for Sex Educators. Revised Edition

    Huberman, Barbara

    2011-01-01

    Whether you are someone new to the field of sex education, trying to start a library or resource center on adolescent sexual health, or an old pro, this guide should give you a basic orientation to what's available to support your work. These resources are important to advancing positive attitudes toward adolescent sexual health and the author…

  11. Dance Movement Therapy: A Healing Art. [Revised Edition.

    Levy, Fran J.

    The concern of this text is the need that many individuals have for nonverbal, primarily physical forms of expression, and how this need has fueled the development of a new psychomotor discipline. The book treats the theory and practice of dance therapy, and examines the entire field from its inception through the present. Dance therapy, the use…

  12. Stirling engine design manual, 2nd edition

    Martini, W. R.

    1983-01-01

    This manual is intended to serve as an introduction to Stirling cycle heat engines, as a key to the available literature on Stirling engines and to identify nonproprietary Stirling engine design methodologies. Two different fully described Stirling engines are discussed. Engine design methods are categorized as first order, second order, and third order with increased order number indicating increased complexity. FORTRAN programs are listed for both an isothermal second order design program and an adiabatic second order design program. Third order methods are explained and enumerated. In this second edition of the manual the references are updated. A revised personal and corporate author index is given and an expanded directory lists over 80 individuals and companies active in Stirling engines.

  13. Searching for new gamma-ray blazar candidates in the 3rd Palermo BAT Hard X-ray Catalog with WISE

    Maselli, A; Cusumano, G; D'Abrusco, R; La Parola, V; Paggi, A; Segreto, A; Smith, Howard A; Tosti, G

    2013-01-01

    We searched for gamma-ray blazar candidates among the 382 unidentified hard X-ray sources of the 3rd Palermo BAT Catalog (3PBC) obtained from the analysis of 66 months of SWIFT-BAT survey data and listing 1586 sources. We adopted a recently developed association method based on the peculiar infrared colors which characterize the gamma-ray blazars included in the second catalog of active galactic nuclei detected by the Fermi Large Area Telescope (2LAC). We used this method exploiting the data of the all-sky survey performed by the Wide-Field Infrared Survey Explorer (WISE) to establish correspondences between unidentified 3PBC sources and WISE gamma-ray blazar candidates located within the BAT positional uncertainty region at 99% confidence level. We obtained a preliminary list of candidates for which we analysed all the available data in the SWIFT archive to complement the information in the literature and in the radio, infrared and optical catalogs with the information on their optical-UV and soft X-ray emis...

  14. Effect of carbon content on the microstructure and creep properties of a 3rd generation single crystal nickel-base superalloy

    Effect of carbon content on the microstructure and creep properties of a 3rd generation single crystal nickel-base superalloy has been investigated by the scanning electron microscope, X-ray computed tomography and electron probe microanalyzer. With the increase of the carbon content, MC carbides evolve from octahedral to well-developed dendrite, which promotes the formation of microporosity. Moreover, the volume fraction of porosity increases in the experimental alloys after solution heat treatment. As a result, the increase in the size of MC carbides and the porosity has a detrimental effect on the low temperature and high stress creep behavior of the alloys. The specimen crept at 850 °C and 586 MPa with the carbon content of 430 ppm shows the shortest rupture life due to the largest primary creep strain. However, the creep behavior of the alloy at 1120 °C and 140 MPa gets better as the carbon content increases from 88 to 430 ppm. TCP phase is observed near the fracture surfaces of the alloys, which explores as a potential cause for the creep rupture. However, the formation of TCP phase is effectively suppressed for decreasing segregation of the alloying elements, which results in the improvement of the creep life in the alloy with 430 ppm carbon at 1120 °C and 140 MPa

  15. Non-destructive measurement of demineralization and remineralization in the occlusal pits and fissures of extracted 3rd molars with PS-OCT

    Lee, Chulsung; Hsu, Dennis J.; Le, Michael H.; Darling, Cynthia L.; Fried, Daniel

    2009-02-01

    Previous studies have demonstrated that Polarization Sensitive Optical Coherence Tomography (PS-OCT) can be used to image the remineralization of early artificial caries lesion on smooth enamel surfaces of human and bovine teeth. However, most new dental decay is found in the pits and fissures of the occlusal surfaces of posterior dentition and it is in these high risk areas where the performance of new caries imaging devices need to be investigated. The purpose of this study was to demonstrate that PS-OCT can be used to measure the subsequent remineralization of artificial lesions produced in the pits and fissures of extracted 3rd molars. A PS-OCT system operating at 1310-nm was used to acquire polarization resolved images of occlusal surfaces exposed to a demineralizing solution at pH-4.5 followed by a fluoride containing remineralizing solution at pH-7.0 containing 2-ppm fluoride. The integrated reflectivity was calculated to a depth of 200-µm in the entire lesion area using an automated image processing algorithm. Although a well-defined surface zone was clearly resolved in only a few of the samples that underwent remineralization, the PS-OCT measurements indicated a significant (pcaries agents in the important pits and fissures of the occlusal surface.

  16. Evidence of human-induced morphodynamic changes along the Campania coastal areas (southern Italy) since the 3rd-4th cent. AD

    Russo Ermolli, Elda; Romano, Paola; Liuzza, Viviana; Amato, Vincenzo; Ruello, Maria Rosaria; Di Donato, Valentino

    2014-05-01

    Campania has always offered suitable climatic and physiographic conditions for human settlements since prehistoric times. In particular, many Graeco-Roman towns developed along its coasts starting from the 7th-6th cent. BC. In the last decade, geoarchaelogical surveys have been carried out in the archaeological excavations of Neapolis, Paestum and Elea-Velia allowing the main steps of the landscape evolution around these towns to be defined in detail. The greek town of Neapolis rose in the late 6th cent. BC [1] on a terrace overlooking a low-relief rocky coast surrounded by volcanic hills. Port activities developed in a protected bay facing the town from the 4th-2nd cent. BC up to the 4th cent. AD, as testified by the discovery of structures and shipwrecks [2, 3, 4]. Starting from the 3rd cent. AD a spit bar formed at the bay entrance causing the progressive establishment of a lagoon which was gradually filled up by alluvial inputs and completely closed in the 5th cent. AD. During the same period, episodes of increased alluvial inputs were also recorded further west along the coast, where a narrow sandy beach formed at the cliff toe. The greek town of Poseidonia, renamed Paestum by the Romans, was founded in the 540 BC on a travertine terrace facing the sandy littoral of a prograding coastal plain [5]. In front of the main town door, a coastal lagoon developed thanks to the growth of a dune ridge and was probably used for harbor activities [5]. After this period the shoreline shifted seawards, another dune ridge formed and the back-ridge depression was filled with fluvial-marshy deposits, slowly drying up. Phases of travertine deposition, which characterized the SE sector of the plain all along the Holocene, were recorded in the northern and southern quarters of the town in historical times and were connected to the abandonment of the town in the early Medieval times. The greek colony of Elea-Velia was located on top of a siliciclastic promontory where the ruins of

  17. Edit Distance with Block Deletions

    Dana Shapira; Storer, James A.

    2011-01-01

    Several variants of the edit distance problem with block deletions are considered. Polynomial time optimal algorithms are presented for the edit distance with block deletions allowing character insertions and character moves, but without block moves. We show that the edit distance with block moves and block deletions is NP-complete (Nondeterministic Polynomial time problems in which any given solution to such problem can be verified in polynomial time, and any NP problem can be converted into...

  18. Light-Emitting Diodes - 2nd Edition

    Schubert, E. Fred

    2006-06-01

    Revised and fully up-dated, the second edition of this graduate textbook offers a comprehensive explanation of the technology and physics of LEDs such as infrared, visible-spectrum, ultraviolet, and white LEDs made from III-V semiconductors. Elementary properties such as electrical and optical characteristics are reviewed, followed by the analysis of advanced device structures. With nine additional chapters, the treatment of LEDs has been vastly expanded, including new material on device packaging, reflectors, UV LEDs, III-V nitride materials, solid-state sources for illumination applications, and junction temperature. Radiative and non-radiative recombination dynamics, methods for improving light extraction, high-efficiency and high-power device designs, white-light emitters with wavelength-converting phosphor materials, optical reflectors, and spontaneous recombination in resonant-cavity structures are discussed in detail. With exercises, solutions, and illustrative examples, this textbook will be of interest to scientists and engineers working on LEDs and graduate students in electrical engineering, applied physics, and materials science. Contains 30 exercises, over 20 of which have solutions provided in the book Many illustrative examples Contains the same broad perspective as the first edition but is significantly expanded with new material on device packaging, reflectors, UV LEDs, solid-state sources for illumination applications, junction temperature, and III-V nitride materials

  19. Safe Handling of Radioisotopes. 1973 Edition

    Under its Statute the International Atomic Energy Agency is empowered to provide for the application of standards of safety for protection against radiation to its own operations and to operations making use of assistance provided by it or with which it is otherwise directly associated. To this end authorities receiving such assistance are required to observe relevant health and safety measures prescribed by the Agency. As a first step, it was considered an urgent task to provide users of radionuclides with a manual of practice for the safe handling of these substances. The first edition of such a manual was published in 1958 and represented the first of the ''Safety Series'', a series of manuals and codes on health and safety published by the Agency. It was prepared after careful consideration of existing national and international codes of radiation safety by a group of international experts and in consultation with other international bodies. This edition presents the second revision. In response to the suggestion made by some Member States, the term 'radioisotopes' has been changed to 'radionuclides' in the title and, as appropriate, in the text because the term 'radionuclides' includes the radioactive element itself as well as the isotopes. The series of manuals and codes published in the Safety Series and the Technical Reports Series give more complete advice to the user on specialized topics.

  20. Peer-editing Practice in the Writing Classroom: Benefits and Drawbacks

    Ann Rosnida Md. Deni

    2011-01-01

    Full Text Available Small scale studies have shown that peer-editing is beneficial to students as it increases their awareness of the complex process of writing, it improves their knowledge of and skills in writing and helps them become more autonomous in learning. Teachers too may benefit from peer-editing as this practice discloses invaluable information on students’ writing weaknesses and strengths: and teachers’ teaching effectiveness. This is a small scale study conducted on fifteen first-year degree students majoring in Tourism to view the usefulness of peer-editing practice in enhancing their writing skills. Retrospective notes were taken to record students’ receptiveness and reaction towards peer editing practice: students writing samples and peer- editing questionnaires were analyzed to view students’ revisions and comments; and an open— ended questionnaire was distributed to identify students perceptions of peer—editing practice in the writing classroom. Analysis of data gathered revealed that peer-editing practice benefitted both the teacher and most of her students as it exposed important information that could improve her teaching of writing and her students’ writing practices. Data analysis also. however, discloses that peer-editing practice may have adverse effects on students’ motivation and improvement in writing if they are not deployed properly.

  1. A contextual normalised edit distance

    Higuera, Colin de la; Micó Andrés, Luisa

    2008-01-01

    In order to better fit a variety of pattern recognition problems over strings, using a normalised version of the edit or Levenshtein distance is considered to be an appropriate approach. The goal of normalisation is to take into account the lengths of the strings. We define a new normalisation, contextual, where each edit operation is divided by the length of the string on which the edit operation takes place. We prove that this contextual edit distance is a metric and that it can be...

  2. Exploring Leadership: For College Students Who Want to Make a Difference. 2nd Edition

    Komives, Susan R.; Lucas, Nance; McMahon, Timothy R.

    2006-01-01

    This is the thoroughly revised and updated second edition of the bestselling book Exploring Leadership. The book is designed to help college students understand that they are capable of being effective leaders and to guide them in developing their leadership potential. Exploring Leadership incorporates new insights and material developed in the…

  3. The Movement Assessment Battery for Children-Second Edition (MABC-2): A Review and Critique

    Brown, Ted; Lalor, Aislinn

    2009-01-01

    The Movement Assessment Battery for Children-Second Edition (MABC-2) is a recent revision of the well-known Movement Assessment Battery for Children (MABC). The MABC-2 is designed to identify and describe impairments in motor performance of children and adolescents 3 through 16 years of age. The Performance Test and the Checklist have been…

  4. Review and revision of the IAEA transport regulations

    The Regulations for the Safe Transport of Radioactive Material issued by the International ATOMIC Energy Agency (IAEA) have been an important factor in achieving an excellent world-wide safety record for the transport of radioactive material. In order to support maintaining this excellent safety record there is a recognised need to keep these regulations up to data through review and revision, taking into account the latest radiation protection principles and technological developments in the transport and packaging of radioactive material. The 10 year review and revision process which led to the 1996 edition of the IAEA transport regulations was put into place shortly after the 1985 edition had been completed. The IAEA transport regulations have developed and matured with each new edition. The requirements for review and revision of the regulations have evolved accordingly. It was recognised that the review and revision process should be re-evaluated following the publication of the 1996 edition. Proposals for improving the review and revision process were discussed at IAEA meetings of the Transport Safety Standards Advisory Committee in 1996 and 1997. A Consultant Services Meeting in February 1997 produced a general framework for an improved process and a Technical Committee Meeting in June 1997 developed further details. The Technical Committee Meeting addressed the overall sequencing and timing of meetings, any required intermediate steps, criteria for justifying, developing and analysing changes to the regulations and the consensus approach for making changes. This paper will provide an overview of the improved review and revision process which has been recommended by the June 1997 Technical Committee Meeting. (authors)

  5. Scar revision

    Mohit Sharma

    2013-01-01

    Full Text Available Most surgical patients end up with a scar and most of these would want at least some improvement in the appearance of the scar. Using sound techniques for wound closure surgeons can, to a certain extent, prevent suboptimal scars. This article reviews the principles of prevention and treatment of suboptimal scars. Surgical techniques of scar revision, i.e., Z plasty, W plasty, and geometrical broken line closure are described. Post-operative care and other adjuvant therapies of scars are described. A short description of dermabrasion and lasers for management of scars is given. It is hoped that this review helps the surgeon to formulate a comprehensive plan for management of scars of these patients.

  6. Image Quality of 3rd Generation Spiral Cranial Dual-Source CT in Combination with an Advanced Model Iterative Reconstruction Technique: A Prospective Intra-Individual Comparison Study to Standard Sequential Cranial CT Using Identical Radiation Dose

    Wenz, Holger; Máté E Maros; Meyer, Mathias; Förster, Alex; Haubenreisser, Holger; Kurth, Stefan; Schoenberg, Stefan O.; Flohr, Thomas; Leidecker, Christianne; Groden, Christoph; Scharf, Johann; HENZLER, THOMAS

    2015-01-01

    Objectives To prospectively intra-individually compare image quality of a 3rd generation Dual-Source-CT (DSCT) spiral cranial CT (cCT) to a sequential 4-slice Multi-Slice-CT (MSCT) while maintaining identical intra-individual radiation dose levels. Methods 35 patients, who had a non-contrast enhanced sequential cCT examination on a 4-slice MDCT within the past 12 months, underwent a spiral cCT scan on a 3rd generation DSCT. CTDIvol identical to initial 4-slice MDCT was applied. Data was recon...

  7. Dynamic Texture Editing

    Richtr, Radek; Haindl, Michal

    New York, NY, USA: ACM, 2015 - (Jorge, J.; Santos, L.; Durikovic, R.), s. 133-140. (SCCG '15). ISBN 978-1-4503-3693-2. [31st Spring Conference on Computer Graphics. Smolenice (SK), 22.04.2015-24.04.2015] R&D Projects: GA ČR(CZ) GA14-10911S Institutional support: RVO:67985556 Keywords : computer graphics * dynamic texture * dynamic texture editing * dynamic texture modeling * image generation * patch-based texture synthesi Subject RIV: BD - Theory of Information http://library.utia.cas.cz/separaty/2016/RO/haindl-0452757.pdf

  8. The Study of Compound Quality of various Siam Weed (Eupatorium odoratum) Extracts and Toxicity Detoxification mechanisms Against 3rd Instar Larvae of Fruit Fly (Dacus dorsalis)

    The 1H-NMR spectroscopy showed signals of DeltaH tild0.71.6 from hexane-leaf extracts from Siam weed (Eupatorium odoratum) These signals derive from protons of non-polar compounds which include fatty acid residues and terpinoids. In addition, the amplification of the signals indicated of some minor DeltaH tild6.2-7.7. This revealed protons from aromatic rings possibly involving in flavonoids from 1H-NMR spectrum. This is a believe that is a believe that these compounds could be varied from slightly polar compounds to moderately polar compounds. Furthermore, the Thin Layer Chromatography (TLC) of hexane, chloroform and methanol fractions showed the extracts composed of majority of less polar. It is and indication of the method of separation is quite food for separation of polarity basis from these extracts. Finally, the TLC of hexane fraction distinctively produced 7-8 compounds from the extracts. Toxicity testing using topical spray method showed that methnoloc extracts gave highest toxicity against 3rd instar larvae of fruit fly (Darcus dorsalis). The root extracts produced ca. 5 fold mohile GSH-S-transferase ws elevated 2-3 fold. The addition of dimethyl maleate into the extraccts increased their toxicity. The persistent experiment of eupathal from the extracts showed that the extracts can be stabilixed under aqueous solution upto 1 month with losing the compound. Finally, the Siam weed extracts prosuced non toxic to non-target organisms such as gabbies, bee, and mouse. The results of LC50 showed 15,000-26,000 mg/L 6,000-15,000 mg/L and 3,000-10,000 mg/L from hexane, chloroform and methanol extracts, respectively.

  9. Natural Hazards, Second Edition

    Rouhban, Badaoui

    Natural disaster loss is on the rise, and the vulnerability of the human and physical environment to the violent forces of nature is increasing. In many parts of the world, disasters caused by natural hazards such as earthquakes, floods, landslides, drought, wildfires, intense windstorms, tsunami, and volcanic eruptions have caused the loss of human lives, injury, homelessness, and the destruction of economic and social infrastructure. Over the last few years, there has been an increase in the occurrence, severity, and intensity of disasters, culminating with the devastating tsunami of 26 December 2004 in South East Asia.Natural hazards are often unexpected or uncontrollable natural events of varying magnitude. Understanding their mechanisms and assessing their distribution in time and space are necessary for refining risk mitigation measures. This second edition of Natural Hazards, (following a first edition published in 1991 by Cambridge University Press), written by Edward Bryant, associate dean of science at Wollongong University, Australia, grapples with this crucial issue, aspects of hazard prediction, and other issues. The book presents a comprehensive analysis of different categories of hazards of climatic and geological origin.

  10. 齐刺法治疗腰三横突综合征123例%TRIPLE NEEDLING FOR TREATING 123 CASES OF THE 3rd LUMBAR TRANSVERSE SYNDROME

    刘国建

    2007-01-01

    @@ The 3rd lumbar transverse process syndrome is a frequently encountered disease in clinic. It is caused by prolonged stimulation of the fascia of the psoas major muscles by the pointed end of the excessive long transverse processes, leading to inflammation of the fibrous tissues around the transverse processes.

  11. Image Quality of 3rd Generation Spiral Cranial Dual-Source CT in Combination with an Advanced Model Iterative Reconstruction Technique: A Prospective Intra-Individual Comparison Study to Standard Sequential Cranial CT Using Identical Radiation Dose.

    Holger Wenz

    Full Text Available To prospectively intra-individually compare image quality of a 3rd generation Dual-Source-CT (DSCT spiral cranial CT (cCT to a sequential 4-slice Multi-Slice-CT (MSCT while maintaining identical intra-individual radiation dose levels.35 patients, who had a non-contrast enhanced sequential cCT examination on a 4-slice MDCT within the past 12 months, underwent a spiral cCT scan on a 3rd generation DSCT. CTDIvol identical to initial 4-slice MDCT was applied. Data was reconstructed using filtered backward projection (FBP and 3rd-generation iterative reconstruction (IR algorithm at 5 different IR strength levels. Two neuroradiologists independently evaluated subjective image quality using a 4-point Likert-scale and objective image quality was assessed in white matter and nucleus caudatus with signal-to-noise ratios (SNR being subsequently calculated.Subjective image quality of all spiral cCT datasets was rated significantly higher compared to the 4-slice MDCT sequential acquisitions (p<0.05. Mean SNR was significantly higher in all spiral compared to sequential cCT datasets with mean SNR improvement of 61.65% (p*Bonferroni0.05<0.0024. Subjective image quality improved with increasing IR levels.Combination of 3rd-generation DSCT spiral cCT with an advanced model IR technique significantly improves subjective and objective image quality compared to a standard sequential cCT acquisition acquired at identical dose levels.

  12. Introduction to Surgical Technology. Third Edition. Teacher Edition [and] Student Edition.

    Bushey, Vicki; Hildebrand, Bob; Hildebrand, Dinah; Johnson, Dave; Sikes, John; Tahah, Ann; Walker, Susan; Zielsdorf, Lani

    These teacher and student editions provide instructional materials for an introduction to surgical technology course. Introductory materials in the teacher edition include information on use, instructional/task analysis, academic and workplace skill classifications and definitions, related academic and workplace skill list, and crosswalk to…

  13. Oxyacetylene Welding and Oxyfuel Cutting. Third Edition. Teacher Edition [and] Student Edition [and] Student Workbook.

    Knapp, John; Harper, Eddie

    This Oklahoma curriculum guide, which includes a teacher edition, a student edition, and a student workbook, provides three units for a course on oxyacetylene welding, oxyfuel cutting, and cutting done with alternative fuels such as MAPP, propane, and natural gas. The three units are: "Oxyacetylene Welding"; "Oxyfuel Cutting"; and "Oxyacetylene…

  14. Fundamentals of Welding. Teacher Edition [and] Student Edition [and] Student Workbook. Second Edition.

    Fortney, Clarence; Gregory, Mike; New, Larry

    Teacher and student editions and a student workbook for fundamentals of welding comprise the first of six in a series of competency-based instructional materials for welding programs. Introductory pages in the teacher edition are training and competency profile, instructional/task analysis, basic skills icons and classifications, basic skills…

  15. Map Edit Distance vs Graph Edit Distance for Matching Images

    Combier, Camille; Damiand, Guillaume; Solnon, Christine

    2013-01-01

    Generalized maps are widely used to model the topology of nD objects (such as 2D or 3D images) by means of incidence and adjacency relationships between cells (0D vertices, 1D edges, 2D faces, 3D volumes, ...). Recently, we have introduced a map edit distance. This distance compares maps by means of a minimum cost sequence of edit operations that should be performed to transform a map into another map. In this paper, we introduce labelled maps and we show how the map edit distance may be exte...

  16. ICOM2012: 3rd International Conference on the Physics of Optical Materials and Devices (Belgrade, Serbia, 2-6 September 2012)

    Dramićanin, Miroslav D.; Antić, Željka; Viana, Bruno

    2013-11-01

    The 3rd International Conference on the Physics of Optical Materials and Devices (ICOM2012) was held in Belgrade (Serbia) from 2 to 6 September 2012 (figure 1). The conference was organized by the Vinča Institute of Nuclear Sciences, University of Belgrade (Serbia) and the Laboratoire de Chimie de la Matière Condensée de Paris (France), and supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia and Optical Society of America. ICOM2012 was a follow-up to the two previous, successful ICOM conferences held in Herceg Novi in 2006 and 2009. The conference aimed at providing a forum for scientists in optical materials to debate on: • Luminescent materials and nanomaterials • Hybrid optical materials (organic/inorganic) • Characterization techniques of optical materials • Luminescence mechanisms and energy transfers • Theory and modeling of optical processes • Ultrafast-laser processing of materials • Optical sensors • Medical imaging • Advanced optical materials in photovoltaics and biophotonics • Photothermal and photoacoustic spectroscopy and phenomena The conference stressed the value of a fundamental scientific understanding of optical materials. A particular accent was put on wide band-gap materials in crystalline, glass and nanocrystalline forms. The applications mainly involved lasers, scintillators and phosphors. Rare earth and transition metal ions introduced as dopants in various hosts were considered, and their impact on the optical properties were detailed in several presentations. This volume contains selected contributions of speakers and participants of the ICOM2012 conference. The conference provided a unique opportunity for about 200 scientists from 32 countries to discuss recent progress in the field of optical materials. During the three and half days, 21 invited talks and 52 contributed lectures were given, with a special event in memory of our dear colleague Professor Dr Tsoltan

  17. Fast Quasi-Threshold Editing

    Brandes, Ulrik; Strasser, Ben; Wagner, Dorothea

    2015-01-01

    We introduce Quasi-Threshold Mover (QTM), an algorithm to solve the quasi-threshold (also called trivially perfect) graph editing problem with edge insertion and deletion. Given a graph it computes a quasi-threshold graph which is close in terms of edit count. This edit problem is NP-hard. We present an extensive experimental study, in which we show that QTM is the first algorithm that is able to scale to large real-world graphs in practice. As a side result we further present a simple linear-time algorithm for the quasi-threshold recognition problem.

  18. Java2 Enterprise Edition 14 (J2EE 14) Bible

    McGovern, James; Fain, Yakov; Gordon, Jason; Henry, Ethan; Hurst, Walter; Jain, Ashish; Little, Mark; Nagarajan, Vaidyanathan; Oak, Harshad; Phillips, Lee Anne

    2011-01-01

    Java 2 Enterprise Edition (J2EE) is the specification that all enterprise Java developers need to build multi-tier applications, and also the basis for BEA's WebLogic Application Server and IBM's WebSphereRevised to be current with the significant J2EE 1.4 update that will drive substantial developer interestWritten by a top-selling team of eleven experts who provide unique and substantial business examples in a vendor-neutral format, making the information applicable to various application serversCovers patterns, J2EE application servers, frameworks, Ant, and continuous availabilityIncludes e

  19. Engineering Materials and Their Applications, 4th Edition

    Flinn, Richard A.; Trojan, Paul K.

    1994-12-01

    This edition of the classic text/reference book has been updated and revised to provide balanced coverage of metals, ceramics, polymers and composites. The first five chapters assess the different structures of metals, ceramics and polymers and how stress and temperature affect them. Demonstrates how to optimize a material's structure by using equilibrium data (phase diagrams) and nonequilibrium conditions, especially precipitation hardening. Discusses the structures, characteristics and applications of the important materials in each field. Considers topics common to all materials--corrosion and oxidation, failure analysis, processing of electrical and magnetic materials, materials selection and specification. Contains special chapters on advanced and large volume engineering materials plus abundant examples and problems.

  20. Edit while watching: home video editing made easy

    Campanella, Marco; Weda, Hans; Barbieri, Mauro

    2007-01-01

    In recent years, more and more people capture their experiences in home videos. However, home video editing still is a difficult and time-consuming task. We present the Edit While Watching system that allows users to automatically create and change a summary of a home video in an easy, intuitive and lean-back way. Based on content analysis, video is indexed, segmented, and combined with proper music and editing effects. The result is an automatically generated home video summary that is shown to the user. While watching it, users can indicate whether they like certain content, so that the system will adapt the summary to contain more content that is similar or related to the displayed content. During the video playback users can also modify and enrich the content, seeing immediately the effects of their changes. Edit While Watching does not require a complex user interface: a TV and a few keys of a remote control are sufficient. A user study has shown that it is easy to learn and to use, even if users expressed the need for more control in the editing operations and in the editing process.

  1. Computer Organization and Design, Revised Printing The Hardware/Software Interface

    Patterson, David A

    2007-01-01

    What's New in the Third Edition, Revised Printing. The same great book gets better! This revised printing features all of the original content along with these additional features:. • Appendix A (Assemblers, Linkers, and the SPIM Simulator) has been moved from the CD-ROM into the printed book. • Corrections and bug fixes. Third Edition features. New pedagogical features. • Understanding Program Performance. - Analyzes key performance issues from the programmer's perspective. • Check Yourself Questions. - Helps students assess their understanding of key points of a section. • Computers In the R

  2. Learning Stochastic Tree Edit Distance

    Bernard, Marc; Habrard, Amaury; Sebban, Marc

    2006-01-01

    Trees provide a suited structural representation to deal with complex tasks such as web information extraction, RNA secondary structure prediction, or conversion of tree structured documents. In this context, many applications require the calculation of similarities between tree pairs. The most studied distance is likely the tree edit distance for which improvements in terms of complexity have been achieved during the last decade. However, this classic edit distance usually uses a priori fixe...

  3. Natural Editing of Algebraic Expressions

    Nicaud, Jean-François

    2007-01-01

    We call “natural editing of algebraic expressions” the editing of algebraic expressions in their natural representation, the one that is used on paper and blackboard. This is an issue we have investigated in the Aplusix project, a project which develops a system aiming at helping students to learn algebra. The paper summarises first the Aplusix project. Second it presents a notion of algebraic expressions, of representations of algebraic expressions. The last section develops ideas about natu...

  4. CIFLog: the 3rd generation logging software based on Java-NetBeans%基于Java-NetBeans的第三代测井软件CIFLog

    李宁; 王才志; 刘英明; 李伟忠; 夏守姬; 原野

    2013-01-01

    To follow direction of well-logging technology development, get rid of dependence on foreign well-logging software, improve capability of independent innovation, and enchance core competitiveness, CIFLog, the 3rd generation well-logging software which has independent intellectual property rights, has been successfully developed by PetroChina supported by the major national oil and gas project. Based on advanced Java-NetBeans programming technology, CIFLog adopts three-layer structure, and it can run under three major operating systems, i. e. Windows, Linux and Unix. Combine with well-logging evaluation of open-holes and cased holes, CIFLog offers the interpretation methods of complex reservoir including volcanic, carbonate, low-resistivity clastic rocks and flooded zones, and it is the first well-logging software that can be successfully applied to processing and interpretation of all domestically produced high-end imaging logging equipment in China. The successful development of the software not only breaks technical barriers of foreign software, and also fill gaps in relevant fields, meanwhile, it greatly enhances well logging technology and research and development of large-scale software in China.%为了紧跟测井技术的发展方向,摆脱对国外测井软件的依赖,提高自主创新能力,开发具有自主知识产权的测井处理解释软件,提升核心竞争力,中国石油天然气集团公司依托国家油气重大专项,成功研发了第三代测井软件CIFLog.CIFLog基于先进的Java-NetBeans编程技术,采用数据层、支持层和应用层3层框架结构,可以同时运行在Windows、Linux和Unix操作系统下.CI-FLog还将全系列裸眼测井评价与套后测井评价集成为一体,提供了火山岩、碳酸盐岩、低阻碎屑岩和水淹层等复杂储层的处理解释方法,并在国内首家对全部国产高端成像测井装备处理解释提供支持.该软件的成功研发不仅打破了国外软件技术封锁的

  5. Joint conference of iMEC 2015 (2nd International Manufacturing Engineering Conference & APCOMS 2015 (3rd Asia-Pacific Conference on Manufacturing Systems)

    2016-02-01

    The iMEC 2015 is the second International Manufacturing Engineering Conference organized by the Faculty of Manufacturing, Universiti Malaysia Pahang (UMP), held from 12-14th November 2015 in Kuala Lumpur, Malaysia, with a theme "Materials, Manufacturing and Systems for Tomorrow". For the first time, iMEC is organized together with 3rd Asia- Pacific Conference on Manufacturing System (APCOMS 2015) which owned by Fakulti Teknologi Industri, Institut Teknologi Bandung (ITB), Indonesia. This is an extended collaboration between UMP and ITB to intensify knowledge sharing and experiences between higher learning institutions. This conference (iMEC & APCOMS 2015) is a platform for knowledge exchange and the growth of ideas, particularly in manufacturing engineering. The conference aims to bring researchers, academics, scientists, students, engineers and practitioners from around the world together to present their latest findings, ideas, developments and applications related to manufacturing engineering and other related research areas. With rapid advancements in manufacturing engineering, iMEC is an appropriate medium for the associated community to keep pace with the changes. In 2015, the conference theme is “Materials, Manufacturing and Systems for Tomorrow” which reflects the acceleration of knowledge and technology in global manufacturing. The papers in these proceedings are examples of the work presented at the conference. They represent the tip of the iceberg, as the conference attracted over 200 abstracts from Malaysia, Indonesia, Japan, United Kingdom, Australia, India, Bangladesh, South Africa, Turkey and Morocco and 151 full papers were accepted in these proceedings. The conference was run in four parallel sessions with 160 presenters sharing their latest finding in the areas of manufacturing process, systems, advanced materials and automation. The first keynote presentation was given by Prof. B. S. Murthy (IIT, Madras) on "Nanomaterials with Exceptional

  6. To edit or not to edit: regulation of ADAR editing specificity and efficiency.

    Deffit, Sarah N; Hundley, Heather A

    2016-01-01

    Hundreds to millions of adenosine (A)-to-inosine (I) modifications are present in eukaryotic transcriptomes and play an essential role in the creation of proteomic and phenotypic diversity. As adenosine and inosine have different base-pairing properties, the functional consequences of these modifications or 'edits' include altering coding potential, splicing, and miRNA-mediated gene silencing of transcripts. However, rather than serving as a static control of gene expression, A-to-I editing provides a means to dynamically rewire the genetic code during development and in a cell-type specific manner. Interestingly, during normal development, in specific cells, and in both neuropathological diseases and cancers, the extent of RNA editing does not directly correlate with levels of the substrate mRNA or the adenosine deaminase that act on RNA (ADAR) editing enzymes, implying that cellular factors are required for spatiotemporal regulation of A-to-I editing. The factors that affect the specificity and extent of ADAR activity have been thoroughly dissected in vitro. Yet, we still lack a complete understanding of how specific ADAR family members can selectively deaminate certain adenosines while others cannot. Additionally, in the cellular environment, ADAR specificity and editing efficiency is likely to be influenced by cellular factors, which is currently an area of intense investigation. Data from many groups have suggested two main mechanisms for controlling A-to-I editing in the cell: (1) regulating ADAR accessibility to target RNAs and (2) protein-protein interactions that directly alter ADAR enzymatic activity. Recent studies suggest cis- and trans-acting RNA elements, heterodimerization and RNA-binding proteins play important roles in regulating RNA editing levels in vivo. WIREs RNA 2016, 7:113-127. doi: 10.1002/wrna.1319. PMID:26612708

  7. Loosening After Acetabular Revision

    Beckmann, Nicholas A.; Weiss, Stefan; Klotz, Matthias C.M.;

    2014-01-01

    The best method of revision acetabular arthroplasty remains unclear. Consequently, we reviewed the literature on the treatment of revision acetabular arthroplasty using revision rings (1541 cases; mean follow-up (FU) 5.7 years) and Trabecular Metal, or TM, implants (1959 cases; mean FU 3.7 years)...

  8. NIOSH Manual of Analytical Methods (third edition). Fourth supplement

    1990-08-15

    The NIOSH Manual of Analytical Methods, 3rd edition, was updated for the following chemicals: allyl-glycidyl-ether, 2-aminopyridine, aspartame, bromine, chlorine, n-butylamine, n-butyl-glycidyl-ether, carbon-dioxide, carbon-monoxide, chlorinated-camphene, chloroacetaldehyde, p-chlorophenol, crotonaldehyde, 1,1-dimethylhydrazine, dinitro-o-cresol, ethyl-acetate, ethyl-formate, ethylenimine, sodium-fluoride, hydrogen-fluoride, cryolite, sodium-hexafluoroaluminate, formic-acid, hexachlorobutadiene, hydrogen-cyanide, hydrogen-sulfide, isopropyl-acetate, isopropyl-ether, isopropyl-glycidyl-ether, lead, lead-oxide, maleic-anhydride, methyl-acetate, methyl-acrylate, methyl-tert-butyl ether, methyl-cellosolve-acetate, methylcyclohexanol, 4,4'-methylenedianiline, monomethylaniline, monomethylhydrazine, nitric-oxide, p-nitroaniline, phenyl-ether, phenyl-ether-biphenyl mixture, phenyl-glycidyl-ether, phenylhydrazine, phosphine, ronnel, sulfuryl-fluoride, talc, tributyl-phosphate, 1,1,2-trichloro-1,2,2-trifluoroethane, trimellitic-anhydride, triorthocresyl-phosphate, triphenyl-phosphate, and vinyl-acetate.

  9. Learner and Teacher Readiness for Constructivism in the Algerian EFL Classroom: The Case of 3rd Year Literary Classrooms in Colonel Abd Elhadi Secondary School (Sidi Bel-Abbes)

    KHELIFI, Khayreddine

    2014-01-01

    By the rise of the twenty first century, the Algerian educational system was reformed adopting the Competency-Based Approach inspired from constructivist learning theory. Thus, the aim of this work was to explore, through a case study design, the readiness of both learners and teachers for constructivism in the Algerian EFL classroom (3rd year literary classrooms). The analysis and triangulation of the data obtained from a set of research instruments (learners’ questionnaire, t...

  10. The ICSTM+TUM+UP Approach to the 3rd CHIME Challenge: Single-Channel LSTM Speech Enhancement with Multi-Channel Correlation Shaping Dereverberation and LSTM Language Models

    Mousa, Amr El-Desoky; Marchi, Erik; Schuller, Björn

    2015-01-01

    This paper presents our contribution to the 3rd CHiME Speech Separation and Recognition Challenge. Our system uses Bidirectional Long Short-Term Memory (BLSTM) Recurrent Neural Networks (RNNs) for Single-channel Speech Enhancement (SSE). Networks are trained to predict clean speech as well as noise features from noisy speech features. In addition, the system applies two methods of dereverberation on the 6-channel recordings of the challenge. The first is the Phase-Error based Filtering (PEF) ...

  11. An Analysis of Revisions to Annual GDP Estimates of Six ADB Regional Members

    Sim, Benson; de Castro, Modesta; Pascua, Melissa

    2009-01-01

    This paper analyzes the histories of revisions of official annual real gross domestic product (GDP) growth rates for six regional members of the Asian Development Bank (ADB) - People's Republic of China; India; Indonesia; Republic of Korea; Taipei,China; and Thailand - for the period 1990–2004 as computed from successive editions of ADB's flagship annual statistical publication, Key Indicators for Asia and the Pacific. A number of revisions indicators for each economy are computed. The result...

  12. How to Teach Poetry Writing: Workshops for Ages 8-13. Developing Creative Literacy, 2nd Edition

    Morgan, Michaela

    2011-01-01

    Now in a fully revised and extended second edition, "How to Teach Poetry Writing: Workshops for Ages 8-13" is a practical and activity based resource of writing workshops to help you teach poetry in the primary classroom. Designed to help build writing, speaking and listening skills, this book contains a wide selection of workshops exemplifying a…

  13. Test Reviews: Reynolds, C., & Voress, J. K. (2007). "Test of Memory and Learning: Second Edition." Austin, TX: PRO-ED

    Schmitt, Ara J.; Decker, Scott L.

    2009-01-01

    This article reviews the Test of Memory and Learning: Second Edition (TOMAL-2), published by PRO-ED, which constitutes a recent revision of the Test of Memory and Learning (TOMAL; Reynolds & Bigler, 1994). Advertised as the "single most comprehensive memory battery available for the entire age range of 5 years through 59 years of age", the TOMAL-2…

  14. Effects of Deep Water Source-Sink Terms in 3rd generation Wave Model SWAN using different wind data in Black Sea

    Kirezci, Cagil; Ozyurt Tarakcioglu, Gulizar

    2016-04-01

    Coastal development in Black Sea has increased in recent years. Therefore, careful monitoring of the storms and verification of numerical tools with reliable data has become important. Previous studies by Kirezci and Ozyurt (2015) investigated extreme events in Black Sea using different wind datasets (NCEP's CFSR and ECMWF's operational datasets) and different numerical tools (SWAN and Wavewatch III). These studies showed that significant effect to results is caused by the deep water source-sink terms (wave growth by wind, deep water dissipation of wave energy (whitecapping) and deep water non-linear wave-wave interactions). According to Timmermans(2015), uncertainty about wind forcing and the process of nonlinear wave-wave interactions are found to be dominant in numerical wave modelling. Therefore, in this study deep water source and sink term solution approaches of 3rd generation numerical tool (SWAN model) are tested, validated and compared using the selected extreme storms in Black Sea. 45 different storms and storm like events observed in Black Sea between years 1994-1999 are selected to use in the models. The storm selection depends on the instrumental wave data (significant wave heights, mean wave period and mean wave direction) obtained in NATO-TU Waves project by the deep water buoy measurements at Hopa, Sinop, Gelendzhik, and wind data (mean and peak wind speeds, storm durations) of the regarding events. 2 different wave growth by wind with the corresponding deep water dissipation terms and 3 different wave -wave interaction terms of SWAN model are used in this study. Wave growth by wind consist of two parts, linear growth which is explained by Cavaleri and Malanotte-Rizzoli(1981),and dominant exponential growth. There are two methods in SWAN model for exponential growth of wave, first one by Snyder et al. (1981), rescaled in terms of friction velocity by Komen et. al (1984) which is derived using driving wind speed at 10m elevation with related drag

  15. Effects of Deep Water Source-Sink Terms in 3rd generation Wave Model SWAN using different wind data in Black Sea

    Kirezci, Cagil; Ozyurt Tarakcioglu, Gulizar

    2016-04-01

    Coastal development in Black Sea has increased in recent years. Therefore, careful monitoring of the storms and verification of numerical tools with reliable data has become important. Previous studies by Kirezci and Ozyurt (2015) investigated extreme events in Black Sea using different wind datasets (NCEP's CFSR and ECMWF's operational datasets) and different numerical tools (SWAN and Wavewatch III). These studies showed that significant effect to results is caused by the deep water source-sink terms (wave growth by wind, deep water dissipation of wave energy (whitecapping) and deep water non-linear wave-wave interactions). According to Timmermans(2015), uncertainty about wind forcing and the process of nonlinear wave-wave interactions are found to be dominant in numerical wave modelling. Therefore, in this study deep water source and sink term solution approaches of 3rd generation numerical tool (SWAN model) are tested, validated and compared using the selected extreme storms in Black Sea. 45 different storms and storm like events observed in Black Sea between years 1994-1999 are selected to use in the models. The storm selection depends on the instrumental wave data (significant wave heights, mean wave period and mean wave direction) obtained in NATO-TU Waves project by the deep water buoy measurements at Hopa, Sinop, Gelendzhik, and wind data (mean and peak wind speeds, storm durations) of the regarding events. 2 different wave growth by wind with the corresponding deep water dissipation terms and 3 different wave -wave interaction terms of SWAN model are used in this study. Wave growth by wind consist of two parts, linear growth which is explained by Cavaleri and Malanotte-Rizzoli(1981),and dominant exponential growth. There are two methods in SWAN model for exponential growth of wave, first one by Snyder et al. (1981), rescaled in terms of friction velocity by Komen et. al (1984) which is derived using driving wind speed at 10m elevation with related drag

  16. Connectivity editing for quadrilateral meshes

    Peng, Chihan

    2011-12-12

    We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed highlevel operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques. © 2011 ACM.

  17. Connectivity editing for quadrilateral meshes

    Peng, Chihan

    2011-12-01

    We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed high-level operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques.

  18. Comparative biomechanics: life's physical world (second edition)

    Vogel, Steven

    2013-01-01

    Why do you switch from walking to running at a specific speed? Why do tall trees rarely blow over in high winds? And why does a spore ejected into air at seventy miles per hour travel only a fraction of an inch? Comparative Biomechanics is the first and only textbook that takes a comprehensive look at the mechanical aspects of life--covering animals and plants, structure and movement, and solids and fluids. An ideal entry point into the ways living creatures interact with their immediate physical world, this revised and updated edition examines how the forms and activities of animals and plants reflect the materials available to nature, considers rules for fluid flow and structural design, and explores how organisms contend with environmental forces. Drawing on physics and mechanical engineering, Steven Vogel looks at how animals swim and fly, modes of terrestrial locomotion, organism responses to winds and water currents, circulatory and suspension-feeding systems, and the relationship between size and mech...

  19. Understanding Editing Behaviors in Multilingual Wikipedia

    Hale, Scott A.; Kim, Sooyoung; Byun, Jeongmin; Oh, Alice H.

    2016-01-01

    Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary) languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language. PMID:27171158

  20. Understanding Editing Behaviors in Multilingual Wikipedia.

    Suin Kim

    Full Text Available Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language.

  1. Understanding Editing Behaviors in Multilingual Wikipedia.

    Kim, Suin; Park, Sungjoon; Hale, Scott A; Kim, Sooyoung; Byun, Jeongmin; Oh, Alice H

    2016-01-01

    Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary) languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language. PMID:27171158

  2. A structural determinant required for RNA editing

    Tian, Nan; Yang, Yun; Sachsenmaier, Nora; Muggenhumer, Dominik; Bi, Jingpei; Waldsich, Christina; Jantsch, Michael F.; Jin, Yongfeng

    2011-01-01

    RNA editing by adenosine deaminases acting on RNAs (ADARs) can be both specific and non-specific, depending on the substrate. Specific editing of particular adenosines may depend on the overall sequence and structural context. However, the detailed mechanisms underlying these preferences are not fully understood. Here, we show that duplex structures mimicking an editing site in the Gabra3 pre-mRNA unexpectedly fail to support RNA editing at the Gabra3 I/M site, although phylogenetic analysis suggest an evolutionarily conserved duplex structure essential for efficient RNA editing. These unusual results led us to revisit the structural requirement for this editing by mutagenesis analysis. In vivo nuclear injection experiments of mutated editing substrates demonstrate that a non-conserved structure is a determinant for editing. This structure contains bulges either on the same or the strand opposing the edited adenosine. The position of these bulges and the distance to the edited base regulate editing. Moreover, elevated folding temperature can lead to a switch in RNA editing suggesting an RNA structural change. Our results indicate the importance of RNA tertiary structure in determining RNA editing. PMID:21427087

  3. Gas Metal Arc Welding and Flux-Cored Arc Welding. Third Edition. Teacher Edition [and] Student Edition [and] Student Workbook.

    Knapp, John; Harper, Eddie

    This packet, containing a teacher's edition, a student edition, and a student workbook, introduces students to high deposition welding and processes for "shielding" a weld. In addition to general information, the teacher edition consists of introductory pages and teacher pages, as well as unit information that corresponds to the materials in the…

  4. Beginning XML, 5th Edition

    Fawcett, Joe; Quin, Liam R E

    2012-01-01

    A complete update covering the many advances to the XML language The XML language has become the standard for writing documents on the Internet and is constantly improving and evolving. This new edition covers all the many new XML-based technologies that have appeared since the previous edition four years ago, providing you with an up-to-date introductory guide and reference. Packed with real-world code examples, best practices, and in-depth coverage of the most important and relevant topics, this authoritative resource explores both the advantages and disadvantages of XML and addresses the mo

  5. Genome editing comes of age.

    Kim, Jin-Soo

    2016-09-01

    Genome editing harnesses programmable nucleases to cut and paste genetic information in a targeted manner in living cells and organisms. Here, I review the development of programmable nucleases, including zinc finger nucleases (ZFNs), TAL (transcription-activator-like) effector nucleases (TALENs) and CRISPR (cluster of regularly interspaced palindromic repeats)-Cas9 (CRISPR-associated protein 9) RNA-guided endonucleases (RGENs). I specifically highlight the key advances that set the foundation for the rapid and widespread implementation of CRISPR-Cas9 genome editing approaches that has revolutionized the field. PMID:27490630

  6. [An introduction on the editions of Zhang Gao's Yi shuo (Medical Narrations)].

    Wang, Xuguang; Lu, Xiang

    2014-11-01

    Zhang Gao's Yi shuo (Medical Narrations) of the Southern Song Dynasty had 2 kinds of editions: domestic editions and foreign editions. The former includes 1 Song edition, 14 Ming editions, 3 Qing editions and 25 editions after the Republic of China. The latter, mainly 2 classes, the Japanese edition and Korean printing type edition. In the Ming Dynasty, the editions of Yi shuo generated 2 branches: inherited edition and supplementary edition. The inherited editions include Gu Dingfang's edition, Zhang Yaode's edition, Wu Mianxue's edition, Wu Zhongheng's edition, Wang Kentang's edition, editions from Si ku quan shu (Imperial Collection of Four), stereotype edition of the 3th year of Xuantong reign (1911) from Shanghai Civilization Bookstore, edition of the 2(nd) year of Manji of Japan etc. The supplemental editions include Zhang Zili's edition, Shen Fan's edition, Fu Feng'ao's edition, transcript of the late Ming Dynasty preserved in the Library of Peking University, and Korean printing type edition etc. PMID:25620361

  7. Civil Technology Applications. Teacher Edition [and] Student Edition.

    Schertz, Karen

    Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

  8. Controlled flexibility in technical editing - The levels-of-edit concept at JPL

    Buehler, M. F.

    1977-01-01

    The levels-of-edit concept, which can be used to specify the amount of editorial effort involved in the preparation of a manuscript for publication, is discussed. Nine types of editing are identified and described. These include coordination edit (preparing estimates, gathering cost data, monitoring production processes), policy edit, integrity edit (making sure that parts of a publication match in a physical or numerical sense), screening edit (ensuring that the quality of camera-ready copy is sufficient for external publication), copy clarification edit, format edit, mechanical style edit, language edit, and substantive edit (reviewing the manuscript for content coherence, emphasis, subordination and parallelism). These functions are grouped into five levels of edit. An edit-level number is assigned to each manuscript, providing a quantitative and qualitative indicator of the editing to be done which is clearly understood by authors, managers, and editors alike. In addition, clear boundaries are drawn between normal and extraordinary editing tasks. Individual organizations will group various edits in different ways to reflect their needs and priorities; the essential element of the system is unambiguous definition and coding of the types and amount of work to be done.

  9. Dictionary of minor planet names addendum to 6th edition 2012-2014

    Schmadel, Lutz D

    2015-01-01

    The quantity of numbered minor planets is now approaching half a million. Together with this Addendum, the sixth edition of the Dictionary of Minor Planet Names, which is the IAU's official reference for the field, now covers more than 19,000 named minor planets. In addition to being of practical value for identification purposes, the Dictionary of Minor Planet Names provides authoritative information about the basis for the rich and colorful variety of ingenious names, from heavenly goddesses to artists, from scientists to Nobel laureates, from historical or political figures to ordinary women and men, from mountains to buildings, as well as a variety of compound terms and curiosities. This Addendum to the 6th edition of the Dictionary of Minor Planet Names adds approximately 2200 entries. It also contains many corrections, revisions and updates to the entries published in earlier editions. This work is an abundant source of information for anyone interested in minor planets and who enjoys reading about the ...

  10. Parameter-Free Extended Edit Distance

    Muhammad Fuad, Muhammad Marwan

    2014-01-01

    The edit distance is the most famous distance to compute the similarity between two strings of characters. The main drawback of the edit distance is that it is based on local procedures which reflect only a local view of similarity. To remedy this problem we presented in a previous work the extended edit distance, which adds a global view of similarity between two strings. However, the extended edit distance includes a parameter whose computation requires a long training time. In this paper w...

  11. 16th edition IEE wiring regulations design and verification of electrical installations

    Scaddan, Brian

    1995-01-01

    This book builds on the basic knowledge and techniques covered in 16th Edition IEE Wiring Regulations Explained and Illustrated, providing the information and revision materials needed for the City & Guilds 2400 (Design, Erection and Verification ofElectrical Installations) exam. All Qualifying Managers will be required to gain this qualification, and Brian Scaddan's book is the ideal text for all students undertaking C&G 2400 courses.

  12. Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. General Safety Requirements. Pt. 3 (Chinese Edition)

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  13. Radiation protection and safety of radiation sources: International basic safety standards. General safety requirements. Pt. 3 (Russian Edition)

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  14. Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. General Safety Requirements. Pt. 3 (Arabic Edition)

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  15. A Guide to the Elements, Rev. Edition (by Albert Stwertka)

    Berger, Reviewed By Daniel

    1999-12-01

    This edition is identical in format and content to the 1996 edition, now sold as the "library edition", except that the names and information for elements 104-109 have been updated. My earlier review still applies; a page-by-page comparison found this edition identical to the first except as noted in the previous sentence. The major revision has been in size and price. The 50% price reduction is welcome, but the format was not changed when the size was reduced, and the resulting 9-point font puts readers at risk of eyestrain. I would like to correct one of the criticisms in my earlier review There is excellent discussion of the industrial uses of each element, as well as its most common source minerals. The more economically important elements are given extensive discussions, detailing industrial uses of the element and its compounds. However, biological activity is given spotty coverage. There is no mention - under "iron" or elsewhere - of the central biological role of iron in oxygen transport or of magnesium in photosynthesis. When coverage appears it is not bad: the roles of calcium in vertebrate and invertebrate skeletons, of fluorine in reducing tooth decay by changing hydroxyapatite to fluorapatite, and of cobalt in vitamin B12 are discussed. While information on transuranium elements has been updated, there has been no attempt to correct several minor errors in spelling, placement, or even information. On page 14 the 1s subshell appears as part of the L (n = 2) shell, and upon the electrolysis of molten sodium chloride on page 54, "sodium collects atthe cathode, and chloride [sic] at...the anode." On page 73 the etymology of "potash" is still given as "potassium-rich ash" rather than "ash burned down in pots", though it is obvious that the latter is intended. On page 74, a picture caption claims that black powder ("potassium nitrate, wood charcoal, and sulfur") is used in modern, high-powered rifle cartridges. In spite of the mistakes, which are relatively

  16. Revised cost estimate for the decommissioning of the reactor DR3

    2001-01-01

    The report describes a revision of the cost estimate for the decommissioning of the research Reactor DR 3 as described in the report Risø-R-1250(EN). Decommissioning of the Nuclear Facilities at Risø National Laboratory. Edited by Kurt Lauridsen. Therevision has been performed by the planning group...

  17. Bilingual Children's Writing: Self-Correction and Revision of Written Narratives in Spanish and Nahuatl

    Francis, Norbert

    2005-01-01

    The article reports on findings from a replication of a study of bilingual children's editing and correction strategies. The earlier study analyzed revisions that 2nd, 4th, and 6th graders made to their own compositions, written in Spanish. The present study applied the same procedure and assessment rubric to the first draft of compositions…

  18. The Rehabilitation Counselor Scale: A New Scale for the Revised Strong Interest Inventory

    Leierer, Stephen J.; Strohmer, Douglas C.; Blackwell, Terry L.; Thompson, Richard C.; Donnay, David A. C.

    2008-01-01

    The vocational interests of rehabilitation counselors were explored by developing an occupational scale for the "Strong Interest Inventory, Revised Edition" (SII; 2004). A sample of 414 rehabilitation counselors who were satisfied with rehabilitation counseling as their profession completed an experimental version of the SII. Based on these data,…

  19. Money and Schools. Fifth Edition

    Thompson, David C.; Crampton, Faith E.; Wood, R. Craig

    2012-01-01

    In the new edition of this essential, all-inclusive text, the authors provide more important research for future principals and others enrolled in graduate-level school finance courses. Written in a style that is highly readable, the book offers strong connections to real-world experiences. Readers get both a broad overview of funding concepts and…

  20. Tea and cake [second edition

    Wood, Philippa; MacLellan, Tamar

    2011-01-01

    Tea & Cake is an edited version of the original book produced by Philippa Wood in 2007. The book takes a nostalgic look at childhood memories of ‘baking with mother’ or special tea-time treats. The book combines ink-jet printing with typewritten text and rubber stamps; doilly end-papers and embroidered traycloth covers.