This PhD research was conducted as a collaboration between Laboratoire National d'Hydraulique et Environnement (LNHE) from EDF R and D and the Institut de Mecanique des Fluides de Toulouse (IMFT) in the frame of a CIFRE contract. This PhD thesis aims at providing LNHE a reliable numerical model to study the feasibility of a nuclear waste storage in deep geological structures. The main focus of the thesis is put on developing and implementing a Random Walk Particle Method (RWPM) to model contaminant transport in 3D heterogeneous and fractured porous media. In its first part, the report presents the Lagrangian particle tracking method used to model transport in heterogeneous media with a direct high resolution approach. The solute plume is discretized into concentration packets: particles. The model tracks each particle based on a time-explicit displacement algorithm according to an advective component and a diffusive random component. The method is implemented on a hydraulic model discretized on a 3D unstructured tetrahedral finite element mesh. We focus on techniques to overcome problems due to the discontinuous transport parameters and the unstructured mesh. First, we introduce an asynchronous time-stepping approach to deal with the numerical and overshoot errors that occur with conventional RWPM. Then, a filtering method is applied to smooth discontinuous transport parameters (pre-processing). Finally, once the particle displacements are computed, we propose several filtering and sampling methods to obtain concentrations from particle positions (post-processing). Applications of these methods are presented with cases of tracer advection-dispersion in homogeneous and heterogeneous media. For dense fracture networks, direct high resolution methods are very time consuming and need a lot of computational resources. So, as an alternative to the discrete approach, a dual-continuum representation is used, in the second part of the report, to describe the porous matrix
Lam, M.Ph
2008-06-15
This PhD research was conducted as a collaboration between Laboratoire National d'Hydraulique et Environnement (LNHE) from EDF R and D and the Institut de Mecanique des Fluides de Toulouse (IMFT) in the frame of a CIFRE contract. This PhD thesis aims at providing LNHE a reliable numerical model to study the feasibility of a nuclear waste storage in deep geological structures. The main focus of the thesis is put on developing and implementing a Random Walk Particle Method (RWPM) to model contaminant transport in 3D heterogeneous and fractured porous media. In its first part, the report presents the Lagrangian particle tracking method used to model transport in heterogeneous media with a direct high resolution approach. The solute plume is discretized into concentration packets: particles. The model tracks each particle based on a time-explicit displacement algorithm according to an advective component and a diffusive random component. The method is implemented on a hydraulic model discretized on a 3D unstructured tetrahedral finite element mesh. We focus on techniques to overcome problems due to the discontinuous transport parameters and the unstructured mesh. First, we introduce an asynchronous time-stepping approach to deal with the numerical and overshoot errors that occur with conventional RWPM. Then, a filtering method is applied to smooth discontinuous transport parameters (pre-processing). Finally, once the particle displacements are computed, we propose several filtering and sampling methods to obtain concentrations from particle positions (post-processing). Applications of these methods are presented with cases of tracer advection-dispersion in homogeneous and heterogeneous media. For dense fracture networks, direct high resolution methods are very time consuming and need a lot of computational resources. So, as an alternative to the discrete approach, a dual-continuum representation is used, in the second part of the report, to describe the porous
Selective particle capture by asynchronously beating cilia
Ding, Yang; Kanso, Eva
2015-12-01
Selective particle filtration is fundamental in many engineering and biological systems. For example, many aquatic microorganisms use filter feeding to capture food particles from the surrounding fluid, using motile cilia. One of the capture strategies is to use the same cilia to generate feeding currents and to intercept particles when the particles are on the downstream side of the cilia. Here, we develop a 3D computational model of ciliary bands interacting with flow suspended particles and calculate particle trajectories for a range of particle sizes. Consistent with experimental observations, we find optimal particle sizes that maximize capture rate. The optimal size depends nonlinearly on cilia spacing and cilia coordination, synchronous vs. asynchronous. These parameters affect the cilia-generated flow field, which in turn affects particle trajectories. The low capture rate of smaller particles is due to the particles' inability to cross the flow streamlines of neighboring cilia. Meanwhile, large particles have difficulty entering the sub-ciliary region once advected downstream, also resulting in low capture rates. The optimal range of particle sizes is enhanced when cilia beat asynchronously. These findings have potentially important implications on the design and use of biomimetic cilia in processes such as particle sorting in microfluidic devices.
Particle Acceleration in 3D Magnetic Reconnection
Dahlin, J.; Drake, J. F.; Swisdak, M.
2015-12-01
Magnetic reconnection is an important driver of energetic particles in phenomena such as magnetospheric storms and solar flares. Using kinetic particle-in-cell (PIC) simulations, we show that the stochastic magnetic field structure which develops during 3D reconnection plays a vital role in particle acceleration and transport. In a 2D system, electrons are trapped in magnetic islands which limits their energy gain. In a 3D system, however, the stochastic magnetic field enables the energetic electrons to access volume-filling acceleration regions and therefore gain energy much more efficiently than in the 2D system. We also examine the relative roles of two important acceleration drivers: parallel electric fields and a Fermi mechanism associated with reflection of charged particles from contracting field lines. We find that parallel electric fields are most important for accelerating low energy particles, whereas Fermi reflection dominates energetic particle production. We also find that proton energization is reduced in the 3D system.
EEG-based asynchronous BCI control of a car in 3D virtual reality environments
ZHAO QiBin; ZHANG LiQing; CICHOCKI Andrzej
2009-01-01
Brain computer interface (BCl) aims at creating new communication channels without depending on brain's normal output channels of peripheral nerves and muscles.However,natural and sophisticated interactions manner between brain and computer still remain challenging.In this paper,we investigate how the duration of event-related desynchronization/synchronization (ERD/ERS) caused by motor im-agery (MI) can be modulated and used as an additional control parameter beyond simple binary deci-sions.Furthermore,using the non-time-locked properties of sustained (de)synchronization,we have developed an asynchronous BCl system for driving a car in 3D virtual reality environment (VRE) based on cumulative incremental control strategy.The extensive real time experiments confirmed that our new approach is able to drive smoothly a virtual car within challenging VRE only by the MI tasks with-out involving any muscular activities.
GPU-Based Asynchronous Global Optimization with Particle Swarm
The recent upsurge in research into general-purpose applications for graphics processing units (GPUs) has made low cost high-performance computing increasingly more accessible. Many global optimization algorithms that have previously benefited from parallel computation are now poised to take advantage of general-purpose GPU computing as well. In this paper, a global parallel asynchronous particle swarm optimization (PSO) approach is employed to solve three relatively complex, realistic parameter estimation problems in which each processor performs significant computation. Although PSO is readily parallelizable, memory bandwidth limitations with GPUs must be addressed, which is accomplished by minimizing communication among individual population members though asynchronous operations. The effect of asynchronous PSO on robustness and efficiency is assessed as a function of problem and population size. Experiments were performed with different population sizes on NVIDIA GPUs and on single-core CPUs. Results for successful trials exhibit marked speedup increases with the population size, indicating that more particles may be used to improve algorithm robustness while maintaining nearly constant time. This work also suggests that asynchronous operations on the GPU may be viable in stochastic population-based algorithms to increase efficiency without sacrificing the quality of the solutions.
A parallel algorithm for 3D particle tracking and Lagrangian trajectory reconstruction
Particle-tracking methods are widely used in fluid mechanics and multi-target tracking research because of their unique ability to reconstruct long trajectories with high spatial and temporal resolution. Researchers have recently demonstrated 3D tracking of several objects in real time, but as the number of objects is increased, real-time tracking becomes impossible due to data transfer and processing bottlenecks. This problem may be solved by using parallel processing. In this paper, a parallel-processing framework has been developed based on frame decomposition and is programmed using the asynchronous object-oriented Charm++ paradigm. This framework can be a key step in achieving a scalable Lagrangian measurement system for particle-tracking velocimetry and may lead to real-time measurement capabilities. The parallel tracking algorithm was evaluated with three data sets including the particle image velocimetry standard 3D images data set #352, a uniform data set for optimal parallel performance and a computational-fluid-dynamics-generated non-uniform data set to test trajectory reconstruction accuracy, consistency with the sequential version and scalability to more than 500 processors. The algorithm showed strong scaling up to 512 processors and no inherent limits of scalability were seen. Ultimately, up to a 200-fold speedup is observed compared to the serial algorithm when 256 processors were used. The parallel algorithm is adaptable and could be easily modified to use any sequential tracking algorithm, which inputs frames of 3D particle location data and outputs particle trajectories
Light Attenuation Method for 3D data acquisition (LAM3D) of bottom particle deposits
Er, Jenn Wei; Law, Adrian W. K.; Adams, E. Eric; Yang, Yang
2015-11-01
We have developed a novel experimental technique, Light Attenuation Method for 3D data acquisition (LAM3D), to acquire three-dimensional spatial characteristics and temporal development of bottom particle deposits. The new technique performs data acquisition with higher spatial and temporal resolution than existing approaches with laser and ultrasonic 3D profilers, and is therefore ideal for laboratory investigations with fast varying changes in the sediment bed, such as the developing deposition profile from sediment clouds commonly formed during dredging or land reclamation projects and the dynamic evolution in movable bed processes in rivers. The principle of the technique is based on the analysis of the light attenuation due to multiple light scattering through the particle deposits layer compared to the clear water column. With appropriate calibration, the particles size and distribution thickness can be quantified by the transmitted light spectrum. In the presentation, we will first show our measurement setup with a light panel for calibrated illumination and a system of DSLR cameras for the light capturing. Subsequently, we shall present the experimental results of fast evolving deposition profile of a barge-disposed sediment cloud upon its bottom impact on the sea bed.
Ultrafine particle emissions from desktop 3D printers
Stephens, Brent; Azimi, Parham; El Orch, Zeineb; Ramos, Tiffanie
2013-11-01
The development of low-cost desktop versions of three-dimensional (3D) printers has made these devices widely accessible for rapid prototyping and small-scale manufacturing in home and office settings. Many desktop 3D printers rely on heated thermoplastic extrusion and deposition, which is a process that has been shown to have significant aerosol emissions in industrial environments. However, we are not aware of any data on particle emissions from commercially available desktop 3D printers. Therefore, we report on measurements of size-resolved and total ultrafine particle (UFP) concentrations resulting from the operation of two types of commercially available desktop 3D printers inside a commercial office space. We also estimate size-resolved (11.5 nm-116 nm) and total UFP (PLA) feedstock to ˜1.9 × 1011 # min-1 for the same type of 3D printer utilizing a higher temperature acrylonitrile butadiene styrene (ABS) thermoplastic feedstock. Because most of these devices are currently sold as standalone devices without any exhaust ventilation or filtration accessories, results herein suggest caution should be used when operating in inadequately ventilated or unfiltered indoor environments. Additionally, these results suggest that more controlled experiments should be conducted to more fundamentally evaluate particle emissions from a wider arrange of desktop 3D printers.
A 3D diamond detector for particle tracking
A novel device using single-crystal chemical vapour deposited diamond and resistive electrodes in the bulk forming a 3D diamond detector is presented. The electrodes of the device were fabricated with laser assisted phase change of diamond into a combination of diamond-like carbon, amorphous carbon and graphite. The connections to the electrodes of the device were made using a photo-lithographic process. The electrical and particle detection properties of the device were investigated. A prototype detector system consisting of the 3D device connected to a multi-channel readout was successfully tested with 120 GeV protons proving the feasibility of the 3D diamond detector concept for particle tracking applications for the first time
Vertical Flow Lithography for Fabrication of 3D Anisotropic Particles.
Habasaki, Shohei; Lee, Won Chul; Yoshida, Shotaro; Takeuchi, Shoji
2015-12-22
A microfluidics-based method for the 3D fabrication of anisotropic particles is reported. The method uses a vertical microchannel where tunable light patterns solidify photocurable resins for stacking multiple layers of the resins, thus enabling an application of stereolithography concepts to conventional flow lithography. Multilayered, tapered, and angular compartmental microparticles are demonstrated. PMID:26551590
3D measurements of mobile dust particle trajectories in NSTX
The transport of dust particles in plasmas may play a significant role in the performance of next step fusion devices. Highly mobile incandescent dust particles are observed on NSTX for the majority of the discharges using fast visible cameras. Particles are most often born in the divertor region during events such as ELMs or disruptions. Particles born on the midplane are most often deflected by the plasma boundary and remain outside the scrape off layer. The dynamics of the dust trajectories can be quite complex exhibiting a large variation in both speed (10-200 m/s) and direction. Particles may have constant velocities or exhibit various degrees of acceleration or deceleration. Abrupt reversals in direction are sometimes observed while some of the larger particles are seen to break apart during mid-flight. 3D trajectories of the dust particles have been derived from measurements of dust trajectories taken simultaneously from two observations points with two fast cameras
A Parallel Particle Swarm Optimization Algorithm Accelerated by Asynchronous Evaluations
Venter, Gerhard; Sobieszczanski-Sobieski, Jaroslaw
2005-01-01
A parallel Particle Swarm Optimization (PSO) algorithm is presented. Particle swarm optimization is a fairly recent addition to the family of non-gradient based, probabilistic search algorithms that is based on a simplified social model and is closely tied to swarming theory. Although PSO algorithms present several attractive properties to the designer, they are plagued by high computational cost as measured by elapsed time. One approach to reduce the elapsed time is to make use of coarse-grained parallelization to evaluate the design points. Previous parallel PSO algorithms were mostly implemented in a synchronous manner, where all design points within a design iteration are evaluated before the next iteration is started. This approach leads to poor parallel speedup in cases where a heterogeneous parallel environment is used and/or where the analysis time depends on the design point being analyzed. This paper introduces an asynchronous parallel PSO algorithm that greatly improves the parallel e ciency. The asynchronous algorithm is benchmarked on a cluster assembled of Apple Macintosh G5 desktop computers, using the multi-disciplinary optimization of a typical transport aircraft wing as an example.
3D GEOMETRIC CHARACTERIZATION OF PARTICLES APPLIED TO TECHNICAL CLEANLINESS
Irene Vecchio
2012-11-01
Full Text Available During production of mechanical components, residual dirt collects on the surfaces, thus creating a contamination that affects the durability of the assembled products. Residual particles are currently analyzed based on microscopic 2d images. However, the particle's shape is decisive for the damage it can cause, yet can not be judged reliably from 2d data. Micro-computed tomography allows to capture the complex spatial structures of thousands of particles simultaneously. Now new methods to characterize three dimensional shapes are needed to establish 3d cleanliness analysis. In this work, unambiguously indicative geometric features are defined and it is investigated how they can yield a reliable classification in three typical classes: fibers, chips and granules. Finally, the efficiency of the proposed method is proved by analyzing samples of real dirt particles.
Resolution improvement by 3D particle averaging in localization microscopy
Inspired by recent developments in localization microscopy that applied averaging of identical particles in 2D for increasing the resolution even further, we discuss considerations for alignment (registration) methods for particles in general and for 3D in particular. We detail that traditional techniques for particle registration from cryo electron microscopy based on cross-correlation are not suitable, as the underlying image formation process is fundamentally different. We argue that only localizations, i.e. a set of coordinates with associated uncertainties, are recorded and not a continuous intensity distribution. We present a method that owes to this fact and that is inspired by the field of statistical pattern recognition. In particular we suggest to use an adapted version of the Bhattacharyya distance as a merit function for registration. We evaluate the method in simulations and demonstrate it on 3D super-resolution data of Alexa 647 labelled to the Nup133 protein in the nuclear pore complex of Hela cells. From the simulations we find suggestions that for successful registration the localization uncertainty must be smaller than the distance between labeling sites on a particle. These suggestions are supported by theoretical considerations concerning the attainable resolution in localization microscopy and its scaling behavior as a function of labeling density and localization precision. (paper)
3d particle simulations on ultra short laser interaction
Nishihara, Katsunobu; Okamoto, Takashi; Yasui, Hidekazu [Osaka Univ., Suita (Japan). Inst. of Laser Engineering
1998-03-01
Two topics related to ultra short laser interaction with matter, linear and nonlinear high frequency conductivity of a solid density hydrogen plasma and anisotropic self-focusing of an intense laser in an overdense plasma, have been investigated with the use of 3-d particle codes. Frequency dependence of linear conductivity in a dense plasma is obtained, which shows anomalous conductivity near plasma frequency. Since nonlinear conductivity decreases with v{sub o}{sup -3}, where v{sub o} is a quivering velocity, an optimum amplitude exists leading to a maximum electron heating. Anisotropic self-focusing of a linear polarized intense laser is observed in an overdense plasma. (author)
3D IMAGING OF INDIVIDUAL PARTICLES: A REVIEW
Eric Pirard
2012-06-01
Full Text Available In recent years, impressive progress has been made in digital imaging and in particular in three dimensional visualisation and analysis of objects. This paper reviews the most recent literature on three dimensional imaging with a special attention to particulate systems analysis. After an introduction recalling some important concepts in spatial sampling and digital imaging, the paper reviews a series of techniques with a clear distinction between the surfometric and volumetric principles. The literature review is as broad as possible covering materials science as well as biology while keeping an eye on emerging technologies in optics and physics. The paper should be of interest to any scientist trying to picture particles in 3D with the best possible resolution for accurate size and shape estimation. Though techniques are adequate for nanoscopic and microscopic particles, no special size limit has been considered while compiling the review.
Three-dimensional (3D) volumetric velocity measurement techniques, such as tomographic or holographic particle image velocimetry (PIV), rely upon the computationally intensive formation, storage and localized interrogation of multiple 3D particle intensity fields. Calculation of a single velocity field typically requires the extraction of particle intensities into tens of thousands of 3D sub-volumes or discrete particle clusters, the processing of which can significantly affect the performance of 3D cross-correlation based PIV and 3D particle tracking velocimetry (PTV). In this paper, a series of popular and customized volumetric data formats are presented and investigated using synthetic particle volumes and experimental data arising from tomographic PIV measurements of a turbulent boundary layer. Results show that the use of a sub-grid ordered non-zero intensity format with a sub-grid size of 16 × 16 × 16 points provides the best performance for cross-correlation based PIV analysis, while a particle clustered non-zero intensity format provides the best format for PTV applications. In practical tomographic PIV measurements the sub-grid ordered non-zero intensity format offered a 29% improvement in reconstruction times, while providing a 93% reduction in volume data requirements and a 28% overall improvement in cross-correlation based velocity analysis and validation times. (paper)
Atkinson, C.; Buchmann, N. A.; Soria, J.
2013-11-01
Three-dimensional (3D) volumetric velocity measurement techniques, such as tomographic or holographic particle image velocimetry (PIV), rely upon the computationally intensive formation, storage and localized interrogation of multiple 3D particle intensity fields. Calculation of a single velocity field typically requires the extraction of particle intensities into tens of thousands of 3D sub-volumes or discrete particle clusters, the processing of which can significantly affect the performance of 3D cross-correlation based PIV and 3D particle tracking velocimetry (PTV). In this paper, a series of popular and customized volumetric data formats are presented and investigated using synthetic particle volumes and experimental data arising from tomographic PIV measurements of a turbulent boundary layer. Results show that the use of a sub-grid ordered non-zero intensity format with a sub-grid size of 16 × 16 × 16 points provides the best performance for cross-correlation based PIV analysis, while a particle clustered non-zero intensity format provides the best format for PTV applications. In practical tomographic PIV measurements the sub-grid ordered non-zero intensity format offered a 29% improvement in reconstruction times, while providing a 93% reduction in volume data requirements and a 28% overall improvement in cross-correlation based velocity analysis and validation times.
Optimizing Stellarators for Energetic Particle Confinement using BEAMS3D
Bolgert, Peter; Drevlak, Michael; Lazerson, Sam; Gates, David; White, Roscoe
2015-11-01
Energetic particle (EP) loss has been called the ``Achilles heel of stellarators,'' (Helander, Rep. Prog. Phys. 77 087001 (2014)) and there is a great need for magnetic configurations with improved EP confinement. In this study we utilize a newly developed capability of the stellarator optimization code STELLOPT: the ability to optimize EP confinement via an interface with guiding center code BEAMS3D (McMillan et al., Plasma Phys. Control. Fusion 56, 095019 (2014)). Using this new tool, optimizations of the W7-X experiment and ARIES-CS reactor are performed where the EP loss fraction is one of many target functions to be minimized. In W7-X, we simulate the experimental NBI system using realistic beam geometry and beam deposition physics. The goal is to find configurations with improved neutral beam deposition and energetic particle confinement. These calculations are compared to previous studies of W7-X NBI deposition. In ARIES-CS, we launch 3.5 MeV alpha particles from a near-axis flux surface using a uniform grid in toroidal and poloidal angle. As these particles are born from D-T reactions, we consider an isotropic distribution in velocity space. This research is supported by DoE Contract Number DE-AC02-09CH11466.
Satake, Shin-ichi; Unno, Noriyuki; Nakata, Shuichiro; Taniguchi, Jun
2016-08-01
A new technique based on digital holography and evanescent waves was developed for 3D measurements of the position of gold nanoparticles in water. In this technique, an intensity profile is taken from a holographic image of a gold particle. To detect the position of the gold particle with high accuracy, its holographic image is recorded on a nanosized step made of MEXFLON, which has a refractive index close to that of water, and the position of the particle is reconstructed by means of digital holography. The height of the nanosized step was measured by using a profilometer and the digitally reconstructed height of the glass substrate had good agreement with the measured value. Furthermore, this method can be used to accurately track the 3D position of a gold particle in water.
Particle-Vortex Duality from 3d Bosonization
Karch, Andreas
2016-01-01
We provide a simple derivation of particle-vortex duality in d=2+1 dimensions. Our starting point is a relativistic form of flux attachment, designed to transmute the statistics of particles. From this seed, we derive a web of new dualities. These include particle-vortex duality for bosons as well as the recently discovered counterpart for fermions.
Track reconstruction by GPU in 3D particle tracking detectors
Bozza, Cristiano, E-mail: kryss@sa.infn.it [Department of Physics of the University of Salerno and INFN Gruppo Collegato di Salerno, via Giovanni Paolo II 132, Fisciano, SA 84084 (Italy); De Sio, Chiara [Department of Physics of the University of Salerno and INFN Gruppo Collegato di Salerno, via Giovanni Paolo II 132, Fisciano, SA 84084 (Italy); Kose, Umut [CERN, Geneva (Switzerland); Stellacci, Simona Maria [Department of Physics of the University of Salerno and INFN Gruppo Collegato di Salerno, via Giovanni Paolo II 132, Fisciano, SA 84084 (Italy)
2015-09-11
3D detectors for high-energy physics have always needed large computing power. Its availability has sometimes determined the statistics and performance of experiments. The increasing specific computing power of GPUs in recent years offers new opportunities for this field of application that should not be missed. The paper shows a novel algorithm that supports, as a by-product of speed, wider angular acceptance with respect to established techniques based on CPUs. While the algorithm has been developed in the environment of nuclear emulsions, it has been conceived from the very beginning as a tool for general tracking in 3D detectors. The overall logic can apply to many operational contexts in which tracking occurs in high combinatorial background. The performances of the algorithm are evaluated from different points of view, describing the details of the computing technique that are common to tracking problems and discussing measurements and data from a test-beam exposure. Computing speed has been evaluated on a broad variety of hardware, investigating an approximated scaling formula.
Track reconstruction by GPU in 3D particle tracking detectors
3D detectors for high-energy physics have always needed large computing power. Its availability has sometimes determined the statistics and performance of experiments. The increasing specific computing power of GPUs in recent years offers new opportunities for this field of application that should not be missed. The paper shows a novel algorithm that supports, as a by-product of speed, wider angular acceptance with respect to established techniques based on CPUs. While the algorithm has been developed in the environment of nuclear emulsions, it has been conceived from the very beginning as a tool for general tracking in 3D detectors. The overall logic can apply to many operational contexts in which tracking occurs in high combinatorial background. The performances of the algorithm are evaluated from different points of view, describing the details of the computing technique that are common to tracking problems and discussing measurements and data from a test-beam exposure. Computing speed has been evaluated on a broad variety of hardware, investigating an approximated scaling formula
Freestanding 3D supramolecular particle bridges: fabrication and mechanical behavior.
Ling, Xing Yi; Phang, In Yee; Schönherr, Holger; Reinhoudt, David N; Vancso, G Julius; Huskens, Jurriaan
2009-06-01
Freestanding particle bridges with controlled composition and macroscopic robustness are demonstrated by the use of supramolecular nanoparticle assembly. Self-assembly of nanoparticles, templating, and supramolecular glue infiltration are combined to form stable and ordered three-dimensional polystyrene particle composites on a polydimethylsiloxane stamp. Freestanding hybrid polystyrene nanoparticle bridges are obtained by transfer printing of the hybrid structures onto topographically patterned substrates via host-guest interactions. The mechanical robustness and rigidity of the particle bridges can be controlled by manipulating the layer-by-layer cycles of supramolecular glues of gold nanoparticles and dendrimers. Atomic force microscopy-based microbending results, in particular the location and force-dependent deflection behavior, confirm that the particle bridge fulfills the classical supported-beam characteristics. As estimated from classical beam theory, the bending moduli of the particle bridges vary between 0.8 and 1.1 GPa, depending on the degree of filling by the supramolecular glues. Failure analysis on the particle structure indicates linear elastic behavior and a plastic deformation upon failure. PMID:19373830
Online reconstruction of 3D magnetic particle imaging data
Knopp, T.; Hofmann, M.
2016-06-01
Magnetic particle imaging is a quantitative functional imaging technique that allows imaging of the spatial distribution of super-paramagnetic iron oxide particles at high temporal resolution. The raw data acquisition can be performed at frame rates of more than 40 volumes s‑1. However, to date image reconstruction is performed in an offline step and thus no direct feedback is available during the experiment. Considering potential interventional applications such direct feedback would be mandatory. In this work, an online reconstruction framework is implemented that allows direct visualization of the particle distribution on the screen of the acquisition computer with a latency of about 2 s. The reconstruction process is adaptive and performs block-averaging in order to optimize the signal quality for a given amount of reconstruction time.
Online reconstruction of 3D magnetic particle imaging data.
Knopp, T; Hofmann, M
2016-06-01
Magnetic particle imaging is a quantitative functional imaging technique that allows imaging of the spatial distribution of super-paramagnetic iron oxide particles at high temporal resolution. The raw data acquisition can be performed at frame rates of more than 40 volumes s(-1). However, to date image reconstruction is performed in an offline step and thus no direct feedback is available during the experiment. Considering potential interventional applications such direct feedback would be mandatory. In this work, an online reconstruction framework is implemented that allows direct visualization of the particle distribution on the screen of the acquisition computer with a latency of about 2 s. The reconstruction process is adaptive and performs block-averaging in order to optimize the signal quality for a given amount of reconstruction time. PMID:27182668
3D Visual Tracking with Particle and Kalman Filters
Bayramli, Burak
2010-01-01
One of the most visually demonstrable and straightforward uses of filtering is in the field of Computer Vision. In this document we will try to outline the issues encountered while designing and implementing a particle and kalman filter based tracking system.
3D Simulations of Space Charge Effects in Particle Beams
For the first time, it is possible to calculate the complicated three-dimensional proton accelerator structures at the Paul Scherrer Institut (PSI). Under consideration are external and self effects, arising from guiding and space-charge forces. This thesis has as its theme the design, implementation and validation of a tracking program for charged particles in accelerator structures. This work form part of the discipline of Computational Science and Engineering (CSE), more specifically in computational accelerator modelling. The physical model is based on the collisionless Vlasov-Maxwell theory, justified by the low density (∼ 109 protons/cm3) of the beam and of the residual gas. The probability of large angle scattering between the protons and the residual gas is then sufficiently low, as can be estimated by considering the mean free path and the total distance a particle travels in the accelerator structure. (author)
3D Simulations of Space Charge Effects in Particle Beams
Adelmann, A
2002-10-01
For the first time, it is possible to calculate the complicated three-dimensional proton accelerator structures at the Paul Scherrer Institut (PSI). Under consideration are external and self effects, arising from guiding and space-charge forces. This thesis has as its theme the design, implementation and validation of a tracking program for charged particles in accelerator structures. This work form part of the discipline of Computational Science and Engineering (CSE), more specifically in computational accelerator modelling. The physical model is based on the collisionless Vlasov-Maxwell theory, justified by the low density ({approx} 10{sup 9} protons/cm{sup 3}) of the beam and of the residual gas. The probability of large angle scattering between the protons and the residual gas is then sufficiently low, as can be estimated by considering the mean free path and the total distance a particle travels in the accelerator structure. (author)
Two-Particle Asynchronous Quantum Correlation: Wavefunction Collapse Acting as a Beamsplitter
Kowalski, F. V.; Browne, R. S.
2016-03-01
A two-body quantum correlation is calculated for a particle reflecting from a moving mirror. Correlated interference results when the incident and reflected particle substates and their associated mirror substates overlap. Using the Copenhagen interpretation of measurement, an asynchronous joint probability density (PDF), which is a function both of the different positions and different times at which the particle and mirror are measured, is derived assuming that no interaction occurs between each measurement. Measurement of the particle first, in the correlated interference region, results in a splitting of the mirror substate into ones which have and have not reflected the particle. An analog of the interference from the Doppler effect for only measurements of the particle (a marginal PDF), in this two-body system, is shown to be a consequence of the asynchronous measurement. The simplification obtained for a microscopic particle reflecting from a mesoscopic or macroscopic mirror is used to illustrate asynchronous correlation interferometry. In this case, the small displacement between these mirror states can yield negligible environmental decoherence times. In addition, interference of these mirror states does not vanish in the limit of large mirror mass due to the small momentum exchange in reflecting a microscopic particle.
Fire simulation for a 3D character with particles and motion capture data in Blender
Hoikkala, Ville
2016-01-01
The object of this thesis was to study particle based simulations in 3D and how they can be applied to motion capture data. The theoretical part examines the history of 3D and computer graphics concisely and finally particles and simulations. The practical part consists of the case-work involving a fire emitting particle simulation. The study examines two methods of creating a fire simulation in Blender and how they influence the outlook of the particles. It was found that the fire si...
Hohlmann, M.
2013-01-01
This white paper suggests posing a "grand challenge" to the HEP instrumentation community, i.e. the aggressive development of additive manufacturing, also known as 3D-printing, for the production of particle detectors in collaboration with industry. This notion is an outcome of discussions within the instrumentation frontier group during the 2013 APS-DPF Snowmass summer study conducted by the U.S. HEP community. Improvements of current industrial 3D-printing capabilities by one to two orders ...
Steady-state particle tracking in the object-oriented regional groundwater model ZOOMQ3D
Jackson, C.R.
2002-01-01
This report describes the development of a steady-state particle tracking code for use in conjunction with the object-oriented regional groundwater flow model, ZOOMQ3D (Jackson, 2001). Like the flow model, the particle tracking software, ZOOPT, is written using an object-oriented approach to promote its extensibility and flexibility. ZOOPT enables the definition of steady-state pathlines in three dimensions. Particles can be tracked in both the forward and reverse directions en...
Continuous 3D particle focusing in a microchannel with curved and symmetric sharp corner structures
A new microchannel that enables continuous three-dimensional (3D) particle focusing with a single sheath flow is reported. The 3D particle focusing is based on the combination of the microfluidic drifting effect induced by a curved microchannel and the momentum-change-induced inertial effect induced by a series of repeated symmetric sharp corner structures on both side walls of the microchannel. The microfluidic drifting effect induces particle focusing in the vertical direction (z direction) while the momentum-change-induced inertial effect induces particle focusing in the horizontal direction (on the x–y plane). Eventually, particles are three-dimensionally focused at the center of the microchannel. The 3D particle focusing behavior in the present microchannel was demonstrated by the experiment using 7.32 μm particles at a sample flow rate of 66.7 μL min−1 and a sheath flow rate of 400 μL min−1. Force analysis and computational fluid dynamics (CFD) simulation confirmed particles of different sizes (from 5 to 15 μm) could also be three-dimensionally focused in the present microchannel over a wide range of flow rates. In comparison with other 3D passive focusing techniques, this microchannel built in a single layer only requires a single sheath flow, and hence avoids complex flow control. With its simple structure and operation, this device can potentially be used in 3D particle focusing processes in many lab-on-a chip applications, such as micro flow cytometer. (paper)
Electrophoretic mobility of particles dispersed in an electrolyte solution induces the particles to lag behind a Poiseuille flow in a rectangular microchannel, which causes bidirectional inward migration of particles to the central axis of the channel. As a result, in the present theoretical and experimental study, three-dimensional (3D) particle focusing is clearly realized in such a manner that the particles are aligned in a single file along the axis of the channel as they are transported downstream. Theoretical prediction on the particle migration time provides an excellent assessment of the experimental results. The method proposed in the present study has potential for development of low-cost rapid manufacturing process of sheathless monolayer microchips for 3D particle focusing. (technical note)
Stereoscopic particle tracking for 3D touch, vision and closed-loop control in optical tweezers
Force measurement in an interactive 3D micromanipulation system can allow the user to make delicate adjustments, and to explore surfaces with touch as well as vision. We present a system to achieve this on the micron scale using stereoscopic particle tracking combined with holographic optical tweezers, which can track particles with nanometre accuracy. 2D tracking of particles in each of the stereo images gives 3D positions for each particle. This takes less than 200 µs per image pair, using a 1D 'symmetry transform' applied to each row and column of a 2D image, which can maintain tracking of particles throughout the 10 µm axial range. The only parameters required are the geometry of the imaging system, and therefore there is no need to recalibrate for different particle sizes or refractive indices. Consequently, we can calculate the force exerted by the optical trap in real time at 1 kilohertz, allowing us to implement a force-feedback interface (with a loop rate of 400 Hz). In combination with our OpenGL hologram calculation engine, the system has a closed-loop bandwidth of 20 Hz. This allows us to stabilize trapped particles axially through active feedback, cancelling out some Brownian motion. For the weak traps we use here (spring constant k≈2 pN µm−1), this results in a threefold increase in axial stiffness. We demonstrate the 3D interface by probing an oil droplet, mapping out its surface in the y–z plane
Hoffmann Alex C.
2013-05-01
Full Text Available Particle tracks in a hydrocyclone generated both experimentally by positron emission particle tracking (PEPT and numerically with Eulerian-Lagranian CFD have been studied and compared. A hydrocyclone with a cylinder-on-cone design was used in this study, the geometries used in the CFD simulations and in the experiments being identical. It is shown that it is possible to track a fast-moving particle in a hydrocyclone using PEPT with high temporal and spatial resolutions. The numerical 3-D particle trajectories were generated using the Large Eddy Simulation (LES turbulence model for the fluid and Lagrangian particle tracking for the particles. The behaviors of the particles were analyzed in detail and were found to be consistent between experiments and CFD simulations. The tracks of the particles are discussed and related to the fluid flow field visualized in the CFD simulations using the cross-sectional static pressure distribution.
Verrier, Nicolas; Fournel, Thierry
2015-01-01
In-line digital holography is a valuable tool for sizing, locating and tracking micro- or nano-objects in a volume. When a parametric imaging model is available, Inverse Problems approaches provide a straightforward estimate of the object parameters by fitting data with the model, thereby allowing accurate reconstruction. As recently proposed and demonstrated, combining pixel super-resolution techniques with Inverse Problems approaches improves the estimation of particle size and 3D-position. Here we demonstrate the accurate tracking of colloidal particles in Brownian motion. Particle size and 3D-position are jointly optimized from video holograms acquired with a digital holographic microscopy set up based on a "low-end" microscope objective ($\\times 20$, $\\rm NA\\ 0.5$). Exploiting information redundancy makes it possible to characterize particles with a standard deviation of 15 nm in size and a theoretical resolution of 2 x 2 x 5 nm$^3$ for position under additive white Gaussian noise assumption.
Finite Volume Particle Method for 3-D Elasto-Plastic Solid Simulation
Jahanbakhsh, Ebrahim; Vessaz, Christian; Avellan, François
2014-01-01
Finite Volume Particle Method was successfully used to predict fluid flow behavior for 2-D simulations. In this paper, we present a FVPM which is applicable for 3-D solid mechanics simulations. This method features rectangular top-hat kernels for computing the interaction vectors exactly and efficiently. We employed this method to solve the elasto-plastic constitutive equations. To validate the model, we study the impact of rigid spherical particle to the solid surface with different velociti...
3D imaging of particle tracks in Solid State Nuclear Track Detectors
Wertheim, D.; Gillmore, G.; Brown, L.; Petford, N.
2009-04-01
Inhalation of radon gas (222Rn) and associated ionizing decay products is known to cause lung cancer in human. In the U.K., it has been suggested that 3 to 5 % of total lung cancer deaths can be linked to elevated radon concentrations in the home and/or workplace. Radon monitoring in buildings is therefore routinely undertaken in areas of known risk. Indeed, some organisations such as the Radon Council in the UK and the Environmental Protection Agency in the USA, advocate a ‘to test is best' policy. Radon gas occurs naturally, emanating from the decay of 238U in rock and soils. Its concentration can be measured using CR?39 plastic detectors which conventionally are assessed by 2D image analysis of the surface; however there can be some variation in outcomes / readings even in closely spaced detectors. A number of radon measurement methods are currently in use (for examples, activated carbon and electrets) but the most widely used are CR?39 solid state nuclear track?etch detectors (SSNTDs). In this technique, heavily ionizing alpha particles leave tracks in the form of radiation damage (via interaction between alpha particles and the atoms making up the CR?39 polymer). 3D imaging of the tracks has the potential to provide information relating to angle and energy of alpha particles but this could be time consuming. Here we describe a new method for rapid high resolution 3D imaging of SSNTDs. A ‘LEXT' OLS3100 confocal laser scanning microscope was used in confocal mode to successfully obtain 3D image data on four CR?39 plastic detectors. 3D visualisation and image analysis enabled characterisation of track features. This method may provide a means of rapid and detailed 3D analysis of SSNTDs. Keywords: Radon; SSNTDs; confocal laser scanning microscope; 3D imaging; LEXT
The single particle orbit code, TIBRO, has been modified extensively to improve the interpolation methods used and to allow use of vector potential fields in the simulation of charged particle orbits on a 3D domain. A 3D cubic B-spline algorithm is used to generate spline coefficients used in the interpolation. Smooth and accurate field representations are obtained. When vector potential fields are used, the 3D cubic spline interpolation formula analytically generates the magnetic field used to push the particles. This field has del.BETA = 0 to computer roundoff. When magnetic induction is used the interpolation allows del.BETA does not equal 0, which can lead to significant nonphysical results. Presently the code assumes quadrupole symmetry, but this is not an essential feature of the code and could be easily removed for other applications. Many details pertaining to this code are given on microfiche accompanying this report
3D head pose estimation and tracking using particle filtering and ICP algorithm
Ben Ghorbel, Mahdi
2010-01-01
This paper addresses the issue of 3D head pose estimation and tracking. Existing approaches generally need huge database, training procedure, manual initialization or use face feature extraction manually extracted. We propose a framework for estimating the 3D head pose in its fine level and tracking it continuously across multiple Degrees of Freedom (DOF) based on ICP and particle filtering. We propose to approach the problem, using 3D computational techniques, by aligning a face model to the 3D dense estimation computed by a stereo vision method, and propose a particle filter algorithm to refine and track the posteriori estimate of the position of the face. This work comes with two contributions: the first concerns the alignment part where we propose an extended ICP algorithm using an anisotropic scale transformation. The second contribution concerns the tracking part. We propose the use of the particle filtering algorithm and propose to constrain the search space using ICP algorithm in the propagation step. The results show that the system is able to fit and track the head properly, and keeps accurate the results on new individuals without a manual adaptation or training. © Springer-Verlag Berlin Heidelberg 2010.
Transfer-printing and host-guest properties of 3D supramolecular particle structures.
Ling, Xing Yi; Phang, In Yee; Reinhoudt, David N; Vancso, G Julius; Huskens, Jurriaan
2009-04-01
Mechanically robust and crystalline supramolecular particle structures have been constructed by decoupling nanoparticle assembly and supramolecular glue infiltration into a sequential process. First, beta-cyclodextrin (CD)-functionalized polystyrene particles (d approximately 500 nm) were assembled on a CD-functionalized surface via convective assembly to form highly ordered, but mechanically unstable, particle crystals. Subsequently, the crystals were infiltrated by a solution of adamantyl-functionalized dendrimers, functioning as a supramolecular glue to bind neighboring particles together and to couple the entire particle crystal to the CD surface, both in a noncovalent manner. The supramolecular particle crystals are highly robust, as witnessed by their ability to withstand agitation by ultrasonication. When assembled on a poly(dimethylsiloxane) (PDMS) stamp, the dendrimer-infiltrated particle crystals could be transfer-printed onto a CD-functionalized target surface. By variation of the geometry and size of the PDMS stamps, single particle lines, interconnected particle rings, and V-shaped particle assemblies were obtained. The particle structures served as 3D receptors for the binding of (multiple) complementary guest molecules, indicating that the supramolecular host functionalities of the particle crystals were retained throughout the fabrication process. PMID:20356024
Hohlmann, M
2013-01-01
This white paper suggests posing a "grand challenge" to the HEP instrumentation community, i.e. the aggressive development of additive manufacturing, also known as 3D-printing, for the production of particle detectors in collaboration with industry. This notion is an outcome of discussions within the instrumentation frontier group during the 2013 APS-DPF Snowmass summer study conducted by the U.S. HEP community. Improvements of current industrial 3D-printing capabilities by one to two orders of magnitude in terms of printing resolution, speed, and object size together with developing the ability to print composite materials could enable the production of any desired 3D detector structure directly from a digital model. Current industrial 3D-printing capabilities are briefly reviewed and contrasted with capabilities desired for printing detectors for particle physics, with micro-pattern gaseous detectors used as a first example. A significant impact on industrial technology could be expected if HEP were to part...
3D particle tracking velocimetry using dynamic discrete tomography for plasma physics applications
Moseev, Dmitry; Alpers, Andreas; Gritzmann, Peter;
2013-01-01
3D particle tracking velocimetry (PTV) is a diagnostic technique which is widely used for studying flows, combustion, and plasmas. Current tomographic particle tracking methods are based on the multiplicative algebraic reconstruction technique and used for reconstructing the distribution of multi......-pixel sized particles as greylevel images. Reconstructions obtained by these methods do not necessarily match the experimental data. We propose a new algorithm which can be used for tracking dust particles in tokamaks and stellarators, as well as in low-temperature and complex plasmas. The dynamic discrete...... tomography algorithm is efficient for data from two projection directions and exact. The non-uniqueness can be detected and tracked individually. The algorithm performance is proportional to N3 on average where N is the number of particles in the reconstruction. There is a room for further improvement of the...
3D Head Pose Tracking Using a Particle Filter with Nose Template Matching
Kubota, Hitoshi; Takeshi, Masami; Saito, Hideo
In this paper, we propose a real-time tracking method for driver's head pose in real vehicle environment by using multiple NIR cameras. In order to achieve real-time performance and high-accuracy, 6-DOF of head pose is estimated by a particle filter with restricted state space. Firstly, the 3D position of nose hole is measured by template matching of stereo images. Because nose hole is the most dark area in the captured NIR images, we can robustly detect the position of the nose very precisely. From the 3D position of the nose, we can estimate the head pose as an initial estimate. Then, each hypothesis is updated by prior probability with a constraint of nose position. Thus it can reduce the number of particles with maintained accuracy. The experimental results indicate that this method is effective for head pose tracking.
Visual object tracking in 3D with color based particle filter
Barrera González, Pablo; Matellán Olivera, Vicente; Cañas, José María
2005-01-01
This paper addresses the problem of determining the current 3D location of a moving object and robustly tracking it from a sequence of camera images. The approach presented here uses a particle lter and does not perform any explicit triangulation. Only the color of the object to be tracked is required, but not any precise motion model. The observation model we have developed avoids the color ltering of the entire image. That and the MonteCarlo techniques inside the part...
A Particle Filter of Blind Equalization and Multiuser Detection in Asynchronous DS/CDMA Systems
ZHANG Jing; DONG Jian-ping; ZHANG Qian
2008-01-01
The particle filter (PF) is proposed to be the asynchronous direct-sequence eude-division multiple-access (DS/CDMA) multiuser detector without knowing the channel state information. The PF performs symbol detection according to the joint posterior density probability of simulated particles including relative delays, fading gains and symbols via sequential importance sample and resample. A simplified scheme is also proposed by separating the independent relative delays and fading with symbols. These parameters are modeled as the extended aggressive processes and estimated by the Kalman fdter, so as to provide their arbitrary importance distribution for symbol detection. Simulation results show that the bit error rate of the PF is less than convntional detectors.Moreover, the complexity of PF is moderate comaparable to other nonlinear suboptimal approaches.
Madura, Thomas; Gull, Theodore R.; Clementel, Nicola; Paardekooper, Jan-Pieter; Kruip, Chael; Corcoran, Michael F.; Hamaguchi, Kenji; Teodoro, Mairan
2015-01-01
We present the first 3D prints of output from a supercomputer simulation of a complex astrophysical system, the colliding stellar winds in the massive (>120 MSun), highly eccentric (e ~ 0.9) binary Eta Carinae. Using a consumer-grade 3D printer (Makerbot Replicator 2X), we successfully printed 3D smoothed particle hydrodynamics simulations of Eta Carinae's inner (r ~110 AU) wind-wind collision interface at multiple orbital phases. These 3D prints reveal important, previously unknown 'finger-like' structures at orbital phases shortly after periastron (φ ~1.045) that protrude radially outward from the spiral wind-wind collision region. We speculate that these fingers are related to instabilities (e.g. Rayleigh-Taylor) that arise at the interface between the radiatively-cooled layer of dense post-shock primary-star wind and the hot, adiabatic post-shock companion-star wind. The success of our work and easy identification of previously unknown physical features highlight the important role 3D printing can play in the visualization and understanding of complex 3D time-dependent numerical simulations of astrophysical phenomena.
Moriya, Toshio; Acar, Erman; Cheng, R Holland; Ruotsalainen, Ulla
2015-09-01
In the single particle reconstruction, the initial 3D structure often suffers from the limited angular sampling artifact. Selecting 2D class averages of particle images generally improves the accuracy and efficiency of the reference-free 3D angle estimation, but causes an insufficient angular sampling to fill the information of the target object in the 3D frequency space. Similarly, the initial 3D structure by the random-conical tilt reconstruction has the well-known "missing cone" artifact. Here, we attempted to solve the limited angular sampling problem by sequentially applying maximum a posteriori estimate with expectation maximization algorithm (sMAP-EM). Using both simulated and experimental cryo-electron microscope images, the sMAP-EM was compared to the direct Fourier method on the basis of reconstruction error and resolution. To establish selection criteria of the final regularization weight for the sMAP-EM, the effects of noise level and sampling sparseness on the reconstructions were examined with evenly distributed sampling simulations. The frequency information filled in the missing cone of the conical tilt sampling simulations was assessed by developing new quantitative measurements. All the results of visual and numerical evaluations showed the sMAP-EM performed better than the direct Fourier method, regardless of the sampling method, noise level, and sampling sparseness. Furthermore, the frequency domain analysis demonstrated that the sMAP-EM can fill the meaningful information in the unmeasured angular space without detailed a priori knowledge of the objects. The current research demonstrated that the sMAP-EM has a high potential to facilitate the determination of 3D protein structures at near atomic-resolution. PMID:26193484
Using Gaussian Process Annealing Particle Filter for 3D Human Tracking
Michael Rudzsky
2008-01-01
Full Text Available We present an approach for human body parts tracking in 3D with prelearned motion models using multiple cameras. Gaussian process annealing particle filter is proposed for tracking in order to reduce the dimensionality of the problem and to increase the tracker's stability and robustness. Comparing with a regular annealed particle filter-based tracker, we show that our algorithm can track better for low frame rate videos. We also show that our algorithm is capable of recovering after a temporal target loss.
In this article we present methods for measuring hindered Brownian motion in the confinement of complex 3D geometries using digital video microscopy. Here we discuss essential features of automated 3D particle tracking as well as diffusion data analysis. By introducing local mean squared displacement-vs-time curves, we are able to simultaneously measure the spatial dependence of diffusion coefficients, tracking accuracies and drift velocities. Such local measurements allow a more detailed and appropriate description of strongly heterogeneous systems as opposed to global measurements. Finite size effects of the tracking region on measuring mean squared displacements are also discussed. The use of these methods was crucial for the measurement of the diffusive behavior of spherical polystyrene particles (505 nm diameter) in a microfluidic chip. The particles explored an array of parallel channels with different cross sections as well as the bulk reservoirs. For this experiment we present the measurement of local tracking accuracies in all three axial directions as well as the diffusivity parallel to the channel axis while we observed no significant flow but purely Brownian motion. Finally, the presented algorithm is suitable also for tracking of fluorescently labeled particles and particles driven by an external force, e.g., electrokinetic or dielectrophoretic forces
LEWICE3D/GlennHT Particle Analysis of the Honeywell Al502 Low Pressure Compressor
Bidwell, Colin S.; Rigby, David L.
2015-01-01
A flow and ice particle trajectory analysis was performed for the booster of the Honeywell AL502 engine. The analysis focused on two closely related conditions one of which produced a rollback and another which did not rollback during testing in the Propulsion Systems Lab at NASA Glenn Research Center. The flow analysis was generated using the NASA Glenn GlennHT flow solver and the particle analysis was generated using the NASA Glenn LEWICE3D v3.56 ice accretion software. The flow and particle analysis used a 3D steady flow, mixing plane approach to model the transport of flow and particles through the engine. The inflow conditions for the rollback case were: airspeed, 145 ms; static pressure, 33,373 Pa; static temperature, 253.3 K. The inflow conditions for the non-roll-back case were: airspeed, 153 ms; static pressure, 34,252 Pa; static temperature, 260.1 K. Both cases were subjected to an ice particle cloud with a median volume diameter of 24 microns, an ice water content of 2.0 gm3 and a relative humidity of 100 percent. The most significant difference between the rollback and non-rollback conditions was the inflow static temperature which was 6.8 K higher for the non-rollback case.
3-D electromagnetic plasma particle simulations on the Intel Delta parallel computer
A three-dimensional electromagnetic PIC code has been developed on the 512 node Intel Touchstone Delta MIMD parallel computer. This code is based on the General Concurrent PIC algorithm which uses a domain decomposition to divide the computation among the processors. The 3D simulation domain can be partitioned into 1-, 2-, or 3-dimensional sub-domains. Particles must be exchanged between processors as they move among the subdomains. The Intel Delta allows one to use this code for very-large-scale simulations (i.e. over 108 particles and 106 grid cells). The parallel efficiency of this code is measured, and the overall code performance on the Delta is compared with that on Cray supercomputers. It is shown that their code runs with a high parallel efficiency of ≥ 95% for large size problems. The particle push time achieved is 115 nsecs/particle/time step for 162 million particles on 512 nodes. Comparing with the performance on a single processor Cray C90, this represents a factor of 58 speedup. The code uses a finite-difference leap frog method for field solve which is significantly more efficient than fast fourier transforms on parallel computers. The performance of this code on the 128 node Cray T3D will also be discussed
Sebastian Spath
2015-07-01
Full Text Available 3D printing is a promising method for the fabrication of scaffolds in the field of bone tissue engineering. To date, the mechanical strength of 3D printed ceramic scaffolds is not sufficient for a variety of applications in the reconstructive surgery. Mechanical strength is directly in relation with the porosity of the 3D printed scaffolds. The porosity is directly influenced by particle size and particle-size distribution of the raw material. To investigate this impact, a hydroxyapatite granule blend with a wide particle size distribution was fractioned by sieving. The specific fractions and bimodal mixtures of the sieved granule blend were used to 3D print specimens. It has been shown that an optimized arrangement of fractions with large and small particles can provide 3D printed specimens with good mechanical strength due to a higher packing density. An increase of mechanical strength can possibly expand the application area of 3D printed hydroxyapatite scaffolds.
High-energy particle transport in 3D hydrodynamic models of colliding-wind binaries
Reitberger, K; Reimer, A; Dubus, G; Reimer, O
2014-01-01
Massive stars in binary systems (as WR140, WR147 or $\\eta$ Carinae) have long been regarded as potential sources of high-energy $\\gamma$-rays. The emission is thought to arise in the region where the stellar winds collide and produce relativistic particles which subsequently might be able to emit $\\gamma$-rays. Detailed numerical hydrodynamic simulations have already offered insight in the complex dynamics of the wind collision region (WCR), while independent analytical studies, albeit with simplified descriptions of the WCR, have shed light on the spectra of charged particles. In this paper, we describe a combination of these two approaches. We present a 3D-hydrodynamical model for colliding stellar winds and compute spectral energy distributions of relativistic particles for the resulting structure of the WCR. The hydrodynamic part of our model incorporates the line-driven acceleration of the winds, gravity, orbital motion and the radiative cooling of the shocked plasma. In our treatment of charged particle...
Augustsson, P.; Barnkob, Rune; Bruus, Henrik; Kähler, C. J.; Laurell, T.; Marín, Á. G.; Rossi, M.
We introduce full three-dimensional tracking of particles in an acoustophoresis microchannel using Astigmatism Particle Tracking Velocimetry (APTV) [1]. For the first time the interaction between acoustic streaming and the primary acoustic radiation force in microchannel acoustophoresis are...
Augustsson, P.; Barnkob, Rune; Bruus, Henrik; Kähler, C. J.; Laurell, T.; Marín, Á. G.; Rossi, M.
We introduce full three-dimensional tracking of particles in an acoustophoresis microchannel using Astigmatism Particle Tracking Velocimetry (APTV) [1]. For the first time the interaction between acoustic streaming and the primary acoustic radiation force in microchannel acoustophoresis are exami...
Particle optics in the TIT-RFQ calculated using a 3D particle-in-cell code
Beam dynamics in an RFQ at the Tokyo Institute of Technology was analyzed using a 3D particle-in-cell computer code. In this calculation not only space charge force between each macroparticles but also 3D image charge field were included. Beam transmission performance was calculated for two types of vane-tip design with different tip curvature radii. These results are compared with ones obtained with the idealized linear two-term potential. The old vane tip design with a small tip curvature radius has given very poor beam transmission efficiency which cannot be accepted for the actual machine. (author)
Sebastian Spath; Philipp Drescher; Hermann Seitz
2015-01-01
3D printing is a promising method for the fabrication of scaffolds in the field of bone tissue engineering. To date, the mechanical strength of 3D printed ceramic scaffolds is not sufficient for a variety of applications in the reconstructive surgery. Mechanical strength is directly in relation with the porosity of the 3D printed scaffolds. The porosity is directly influenced by particle size and particle-size distribution of the raw material. To investigate this impact, a hydroxyapatite gran...
3D printing enables separation of orthogonal functions within a hydrogel particle.
Raman, Ritu; Clay, Nicholas E; Sen, Sanjeet; Melhem, Molly; Qin, Ellen; Kong, Hyunjoon; Bashir, Rashid
2016-06-01
Multifunctional particles with distinct physiochemical phases are required by a variety of applications in biomedical engineering, such as diagnostic imaging and targeted drug delivery. This motivates the development of a repeatable, efficient, and customizable approach to manufacturing particles with spatially segregated bioactive moieties. This study demonstrates a stereolithographic 3D printing approach for designing and fabricating large arrays of biphasic poly (ethylene glycol) diacrylate (PEGDA) gel particles. The fabrication parameters governing the physical and biochemical properties of multi-layered particles are thoroughly investigated, yielding a readily tunable approach to manufacturing customizable arrays of multifunctional particles. The advantage in spatially organizing functional epitopes is examined by loading superparamagnetic iron oxide nanoparticles (SPIONs) and bovine serum albumin (BSA) in separate layers of biphasic PEGDA gel particles and examining SPION-induced magnetic resonance (MR) contrast and BSA-release kinetics. Particles with spatial segregation of functional moieties have demonstrably higher MR contrast and BSA release. Overall, this study will contribute significant knowledge to the preparation of multifunctional particles for use as biomedical tools. PMID:27215416
Cornell, Stephen R.; Leser, William P.; Hochhalter, Jacob D.; Newman, John A.; Hartl, Darren J.
2014-01-01
A method for detecting fatigue cracks has been explored at NASA Langley Research Center. Microscopic NiTi shape memory alloy (sensory) particles were embedded in a 7050 aluminum alloy matrix to detect the presence of fatigue cracks. Cracks exhibit an elevated stress field near their tip inducing a martensitic phase transformation in nearby sensory particles. Detectable levels of acoustic energy are emitted upon particle phase transformation such that the existence and location of fatigue cracks can be detected. To test this concept, a fatigue crack was grown in a mode-I single-edge notch fatigue crack growth specimen containing sensory particles. As the crack approached the sensory particles, measurements of particle strain, matrix-particle debonding, and phase transformation behavior of the sensory particles were performed. Full-field deformation measurements were performed using a novel multi-scale optical 3D digital image correlation (DIC) system. This information will be used in a finite element-based study to determine optimal sensory material behavior and density.
3D hybrid and MHD/particle simulations of field-reversed configurations
A nonlinear 3D code in cylindrical geometry is being developed for the stability studies of FRC. Two numerical schemes have been implemented: a hybrid scheme with particle ions and fluid electrons, and MHD/particle scheme in which the background plasma is described by MHD equations. And energetic ions are treated via particle simulations. The MHD equations are advanced on a finite-difference mesh in a cylindrical coordinate system, while particle pushing is done on 3D Cartesian grids. Full ion dynamics is retained in order to include large-orbit effects (with s∼1), which are important for the tilt mode stabilization in FRC. Also, in contrast to the previous work, δf method is utilized to reduce numerical noise in the simulations. The code has been benchmarked against previous MHD simulation of tilting instability in FRC. It was found that rigid rotation reduces the growth rate, but does not stabilize the mode even for rotation rates equal to the Alfven time. Sheared rotation is found to be destabilizing for the velocity profile considered. Simulations with a fast ion beam with 1 % of the bulk ion density and s∼3 did not show a reduction in growth rate of the tilting instability. (author)
Simulation of the 3D viscoelastic free surface flow by a parallel corrected particle scheme
Jin-Lian, Ren; Tao, Jiang
2016-02-01
In this work, the behavior of the three-dimensional (3D) jet coiling based on the viscoelastic Oldroyd-B model is investigated by a corrected particle scheme, which is named the smoothed particle hydrodynamics with corrected symmetric kernel gradient and shifting particle technique (SPH_CS_SP) method. The accuracy and stability of SPH_CS_SP method is first tested by solving Poiseuille flow and Taylor-Green flow. Then the capacity for the SPH_CS_SP method to solve the viscoelastic fluid is verified by the polymer flow through a periodic array of cylinders. Moreover, the convergence of the SPH_CS_SP method is also investigated. Finally, the proposed method is further applied to the 3D viscoelastic jet coiling problem, and the influences of macroscopic parameters on the jet coiling are discussed. The numerical results show that the SPH_CS_SP method has higher accuracy and better stability than the traditional SPH method and other corrected SPH method, and can improve the tensile instability. Project supported by the Natural Science Foundation of Jiangsu Province, China (Grant Nos. BK20130436 and BK20150436) and the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province, China (Grant No. 15KJB110025).
3D Simulation of Dam-break effect on a Solid Wall using Smoothed Particle Hydrodynamics
Suprijadi,; Naa, Christian; Putra, Anggy Trisnawan
2013-01-01
Dam is built for water supply, water flow or flooding control and electricity energy storage, but in other hand, dam is one of the most dangerous natural disaster in many countries including in Indonesia. The impact of dam break in neighbour area and is huge and many flooding in remote area, as happen in Dam Situ Gintung in Tangerang (close to Jakarta) in 2009. Smoothed Particle Hydrodynamics (SPH), is one of numerical method based on Lagrangian grid which is ap- plied in astrophysical simulation may be used to solve the simulation on dam break effect. The development of SPH methods become alternative methods to solving Navier Stokes equation, which is main key in fluid dynamic simulation. In this paper, SPH is developed for supporting solid par- ticles in use for 3D dam break effect (3D-DBE) simulation. Solid particle have been treated same as fluid particles with additional calculation for converting gained position became translation and rotation of solid object in a whole body. With this capability, the r...
Parallel 3-D particle-in-cell modelling of charged ultrarelativistic beam dynamics
Boronina, Marina A.; Vshivkov, Vitaly A.
2015-12-01
> ) in supercolliders. We use the 3-D set of Maxwell's equations for the electromagnetic fields, and the Vlasov equation for the distribution function of the beam particles. The model incorporates automatically the longitudinal effects, which can play a significant role in the cases of super-high densities. We present numerical results for the dynamics of two focused ultrarelativistic beams with a size ratio 10:1:100. The results demonstrate high efficiency of the proposed computational methods and algorithms, which are applicable to a variety of problems in relativistic plasma physics.
Global gyrokinetic models for energetic particle driven Alfvén instabilities in 3D equilibria
Spong, Don; Holod, Ihor
2015-11-01
The GTC global gyrokinetic PIC model has been adapted to 3D VMEC equilibria and provides a new method for the analysis of Alfvénic instabilities in stellarators, 3D tokamaks, and helical RFP states. The gyrokinetic orderings (k||/k⊥ applicable to a range of energetic particle driven instabilities that have been observed in 3D configurations. Applications of this model to stellarators have indicated that a variety of different Alfvén instabilities can be excited, depending on the toroidal mode number, fast ion average energy and fast ion density profile. Both an LHD discharge where bursting n = 1 Alfvén activity in the TAE gap was observed and a W7-X case have been examined. TAE,/EAE/GAE modes have been found in the simulations, depending on the mode family and fast ion profiles used. The dynamical evolution of the instabilities shows the field period coupling between n and n + Nfp expected for a stellarator. The development of gyrofluid reduced models that can capture relevant physics aspects of the gyrokinetic models will also be discussed. Research sponsored by the U.S. Department of Energy under Contract DE-AC05-00OR22725 with UT-Battelle, LLC and the GSEP SciDAC Center.
A Parallelized 3D Particle-In-Cell Method With Magnetostatic Field Solver And Its Applications
Hsu, Kuo-Hsien; Chen, Yen-Sen; Wu, Men-Zan Bill; Wu, Jong-Shinn
2008-10-01
A parallelized 3D self-consistent electrostatic particle-in-cell finite element (PIC-FEM) code using an unstructured tetrahedral mesh was developed. For simulating some applications with external permanent magnet set, the distribution of the magnetostatic field usually also need to be considered and determined accurately. In this paper, we will firstly present the development of a 3D magnetostatic field solver with an unstructured mesh for the flexibility of modeling objects with complex geometry. The vector Poisson equation for magnetostatic field is formulated using the Galerkin nodal finite element method and the resulting matrix is solved by parallel conjugate gradient method. A parallel adaptive mesh refinement module is coupled to this solver for better resolution. Completed solver is then verified by simulating a permanent magnet array with results comparable to previous experimental observations and simulations. By taking the advantage of the same unstructured grid format of this solver, the developed PIC-FEM code could directly and easily read the magnetostatic field for particle simulation. In the upcoming conference, magnetron is simulated and presented for demonstrating the capability of this code.
Generating Irregular Models for 3D Spherical-Particle-Based Numerical Methods
Gang-Hai Huang
2013-01-01
Full Text Available The realistic representation of an irregular geological body is essential to the construction of a particle simulation model. A three-dimensional (3D sphere generator for an irregular model (SGIM, which is based on the platform of Microsoft Foundation Classes (MFC in VC++, is developed to accurately simulate the inherent discontinuities in geological bodies. OpenGL is employed to visualize the modeling in the SGIM. Three key functions, namely, the basic-model-setup function, the excavating function, and the cutting function, are implemented. An open-pit slope is simulated using the proposed model. The results demonstrate that an extremely irregular 3D model of a geological body can be generated using the SGIM and that various types of discontinuities can be inserted to cut the model. The data structure of the model that is generated by the SGIM is versatile and can be easily modified to match various numerical calculation tools. This can be helpful in the application of particle simulation methods to large-scale geoengineering projects.
Hybrid pixel detectors are now widely used in particle physics experiments and are becoming established at synchrotron light sources. They have also stimulated growing interest in other fields and, in particular, in medical imaging. Through the continuous pursuit of miniaturization in CMOS it has been possible to increase the functionality per pixel while maintaining or even shrinking pixel dimensions. The main constraint on the more extensive use of the technology in all fields is the cost of module building and the difficulty of covering large areas seamlessly. On another hand, in the field of electronic component integration, a new approach has been developed in the last years, called 3D Integration. This concept, based on using the vertical axis for component integration, allows improving the global performance of complex systems. Thanks to this technology, the cost and the form factor of components could be decreased and the performance of the global system could be enhanced. In the field of radiation imaging detectors the advantages of 3D Integration come from reduced inter chip dead area even on large surfaces and from improved detector construction yield resulting from the use of single chip 4-side buttable tiles. For many years, numerous R and centres and companies have put a lot of effort into developing 3D integration technologies and today, some mature technologies are ready for prototyping and production. The core technology of the 3D integration is the TSV (Through Silicon Via) and for many years, LETI has developed those technologies for various types of applications. In this paper we present how one of the TSV approaches developed by LETI, called TSV last, has been applied to a readout wafer containing readout chips intended for a hybrid pixel detector assembly. In the first part of this paper, the 3D design adapted to the read-out chip will be described. Then the complete process flow will be explained and, finally, the test strategy adopted and
A Stereo Vision Framework for 3-D Underwater Mosaicking
Leone, A.; Diraco, G.; Distante, C.
2008-01-01
A framework for seabed 3-D mosaic reconstruction has been presented. The three mainly troublesome aspects discussed are asynchronous stereo acquisition, depth estimation and the 3-D mosaic registration. The use of an inexpensive asynchronous stereo sequence is explained,
Measurements of the solid-body rotation of anisotropic particles in 3D turbulence
We introduce a new method to measure Lagrangian vorticity and the rotational dynamics of anisotropic particles in a turbulent fluid flow. We use 3D printing technology to fabricate crosses (two perpendicular rods) and jacks (three mutually perpendicular rods). Time-resolved measurements of their orientation and solid-body rotation rate are obtained from four video images of their motion in a turbulent flow between oscillating grids with Rλ = 91. The advected particles have a largest dimension of 6 times the Kolmogorov length, making them a good approximation to anisotropic tracer particles. Crosses rotate like disks and jacks rotate like spheres, so these measurements, combined with previous measurements of tracer rods, allow experimental study of axisymmetric ellipsoids across the full range of aspect ratios. The measured mean square tumbling rate, 〈 p-dot i p-dot i〉, confirms previous direct numerical simulations that indicate that disks tumble much more rapidly than rods. Measurements of the alignment of a unit vector defining the orientation of crosses with the direction of their solid-body rotation rate vector provide the first direct observation of the alignment of anisotropic particles by the velocity gradients in a turbulent flow. (fast track communication)
3D Particle image velocimetry test of inner flow in a double blade pump impeller
Liu, Houlin; Wang, Kai; Yuan, Shouqi; Tan, Minggao; Wang, Yong; Ru, Weimin
2012-05-01
The double blade pump is widely used in sewage treatment industry, however, the research on the internal flow characteristics of the double blade pump with particle image velocimetry (PIV) technology is very little at present. To reveal inner flow characteristics in double blade pump impeller under off-design and design conditions, inner flows in a double blade pump impeller, whose specific speed is 111, are measured under the five off-design conditions and design condition by using 3D PIV test technology. In order to ensure the accuracy of the 3D PIV test, the external trigger synchronization system which makes use of fiber optic and equivalent calibration method are applied. The 3D PIV relative velocity synthesis procedure is compiled by using Visual C++ 2005. Then absolute velocity distribution and relative velocity distribution in the double blade pump impeller are obtained. Test results show that vortex exists in each condition, but the location, size and velocity of vortex core are different. Average absolute velocity value of impeller outlet increases at first, then decreases, and then increases again with increase of flow rate. Again average relative velocity values under 0.4, 0.8, and 1.2 design condition are higher than that under 1.0 design condition, while under 0.6 and 1.4 design condition it is lower. Under low flow rate conditions, radial vectors of absolute velocities at impeller outlet and blade inlet near the pump shaft decrease with increase of flow rate, while that of relative velocities at the suction side near the pump shaft decreases. Radial vectors of absolute velocities and relative velocities change slightly under the two large flow rate conditions. The research results can be applied to instruct the hydraulic optimization design of double blade pumps.
3D imaging and characterisation of strengthening particles in inconel 718 using FIB tomography
Kruk, Adam; Gruszczynski, Adam; Czyrska-Filemonowicz, Aleksandra [AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Krakow (Poland)
2011-07-01
The Inconel 718 is a commercial nickel-base superalloy, widely used for critical pieces in turbine engines. Its microstructure consists of the {gamma} matrix and strengthening coherent nanoparticles {gamma}' and {gamma}''. In the present work FIB tomography technique was used for imaging and characterisation of strengthening particles. FIB tomography is based on a serial sectioning procedure using a FIB/SEM dual beam workstation. Repeated removal of layers as thin as several nm for some hundred times allows to investigate at total a volume of some {mu}m3 with a voxel size as 2.5 nm x 2.5 nm x 2.5 nm. 3D mapping of nanoparticles with high Z-resolution by serial FIB slicing (in a distance of about 2.5 nm) and SEM imaging was performed. Ga ion beam at 30 kV was used to perform a precise in-situ milling. The SEM images at accelerating voltage 1.5 kV were taken with using ESB detector. The real 3D-data of precipitates obtained by FIB tomography, open a new possibility for microstructure analysis of materials for industrial applications.
Yan, X.; Cai, D.; Nishikawa, K.; Lembege, B.
2004-12-01
We made our efforts to parallelize the global 3D HPF Electromagnetic particle model (EMPM) for several years and have also reported our meaningful simulation results that revealed the essential physics involved in interaction of the solar wind with the Earth's magnetosphere using this EMPM (Nishikawa et al., 1995; Nishikawa, 1997, 1998a, b, 2001, 2002) in our PC cluster and supercomputer(D.S. Cai et al., 2001, 2003). Sash patterns and related phenomena have been observed and reported in some satellite observations (Fujumoto et al. 1997; Maynard, 2001), and have motivated 3D MHD simulations (White and al., 1998). We also investigated it with our global 3D parallelized HPF EMPM with dawnward IMF By (K.-I. Nishikawa, 1998) and recently new simulation with dusk-ward IMF By was accomplished in the new VPP5000 supercomputer. In the new simulations performed on the new VPP5000 supercomputer of Tsukuba University, we used larger domain size, 305×205×205, smaller grid size (Δ ), 0.5R E(the radium of the Earth), more total particle number, 220,000,000 (about 8 pairs per cell). At first, we run this code until we get the so-called quasi-stationary status; After the quasi-stationary status was established, we applied a northward IMF (B z=0.2), and then wait until the IMF arrives around the magnetopuase. After the arrival of IMF, we begin to change the IMF from northward to duskward (IMF B y=-0.2). The results revealed that the groove structure at the day-side magnetopause, that causes particle entry into inner magnetosphere and the cross structure or S-structure at near magneto-tail are formed. Moreover, in contrast with MHD simulations, kinetic characteristic of this event is also analyzed self-consistently with this simulation. The new simulation provides new and more detailed insights for the observed sash event.
Parallel 3D Finite Element Particle-in-Cell Simulations with Pic3P
Candel, A.; Kabel, A.; Lee, L.; Li, Z.; Ng, C.; Schussman, G.; Ko, K.; /SLAC; Ben-Zvi, I.; Kewisch, J.; /Brookhaven
2009-06-19
SLAC's Advanced Computations Department (ACD) has developed the parallel 3D Finite Element electromagnetic Particle-In-Cell code Pic3P. Designed for simulations of beam-cavity interactions dominated by space charge effects, Pic3P solves the complete set of Maxwell-Lorentz equations self-consistently and includes space-charge, retardation and boundary effects from first principles. Higher-order Finite Element methods with adaptive refinement on conformal unstructured meshes lead to highly efficient use of computational resources. Massively parallel processing with dynamic load balancing enables large-scale modeling of photoinjectors with unprecedented accuracy, aiding the design and operation of next-generation accelerator facilities. Applications include the LCLS RF gun and the BNL polarized SRF gun.
A novel approximation method of CTF amplitude correction for 3D single particle reconstruction
The typical resolution of three-dimensional reconstruction by cryo-EM single particle analysis is now being pushed up to and beyond the nanometer scale. Correction of the contrast transfer function (CTF) of electron microscopic images is essential for achieving such a high resolution. Various correction methods exist and are employed in popular reconstruction software packages. Here, we present a novel approximation method that corrects the amplitude modulation introduced by the contrast transfer function by convoluting the images with a piecewise continuous function. Our new approach can easily be implemented and incorporated into other packages. The implemented method yielded higher resolution reconstructions with data sets from both highly symmetric and asymmetric structures. It is an efficient alternative correction method that allows quick convergence of the 3D reconstruction and has a high tolerance for noisy images, thus easing a bottleneck in practical reconstruction of macromolecules.
Combination of Annealing Particle Filter and Belief Propagation for 3D Upper Body Tracking
Ilaria Renna
2012-01-01
Full Text Available 3D upper body pose estimation is a topic greatly studied by the computer vision society because it is useful in a great number of applications, mainly for human robots interactions including communications with companion robots. However there is a challenging problem: the complexity of classical algorithms that increases exponentially with the dimension of the vectors’ state becomes too difficult to handle. To tackle this problem, we propose a new approach that combines several annealing particle filters defined independently for each limb and belief propagation method to add geometrical constraints between individual filters. Experimental results on a real human gestures sequence will show that this combined approach leads to reliable results.
Polyribosomes Are Molecular 3D Nanoprinters That Orchestrate the Assembly of Vault Particles
2014-01-01
Ribosomes are molecular machines that function in polyribosome complexes to translate genetic information, guide the synthesis of polypeptides, and modulate the folding of nascent proteins. Here, we report a surprising function for polyribosomes as a result of a systematic examination of the assembly of a large ribonucleoprotein complex, the vault particle. Structural and functional evidence points to a model of vault assembly whereby the polyribosome acts like a 3D nanoprinter to direct the ordered translation and assembly of the multi-subunit vault homopolymer, a process which we refer to as polyribosome templating. Structure-based mutagenesis and cell-free in vitro expression studies further demonstrated the critical importance of the polyribosome in vault assembly. Polyribosome templating prevents chaos by ensuring efficiency and order in the production of large homopolymeric protein structures in the crowded cellular environment and might explain the origin of many polyribosome-associated molecular assemblies inside the cell. PMID:25354757
Automated 3D Particle Field Extraction and Tracking System Using Digital in-line Holography
Hesham Eldeeb
2006-01-01
Full Text Available Digital holography for 3D particle field extraction and tracking is an active research topic. It has a great application in realizing characterization of micro-scale structures in microelectromechanical systems (MEMS with high resolution and accuracy. In-line configuration is studied in this study as the fundamental structure of a digital holography system. Digital holographic approach, not only eliminates wet chemical processing and mechanical scanning, but also enables the use of complex amplitude information inaccessible by optical reconstruction, thereby allowing flexible reconstruction algorithms to achieve optimization of specific information. However, owing to the inherently low pixel resolution of solid-state imaging sensors, digital holography gives poor depth resolution for images. This problem severely impairs the usefulness of digital holography especially in densely populated particle fields. This study describes a system that significantly improves particle axial-location accuracy by exploring the reconstructed complex amplitude information, compared with other numerical reconstruction schemes that are merely traditional optical reconstruction. Theoretical analysis and experimental results demonstrate that in-line configuration presents advantageous in enhancing the system performance. Greater flexibility of the system, higher lateral resolution and lower speckle noise can be achieved
Particle Concentration At Planet Induced Gap Edges and Vortices: I. Inviscid 3-D Hydro Disks
Zhu, Zhaohuan; Rafikov, Roman R; Bai, Xuening
2013-01-01
We perform a systematic study of the dynamics of dust particles in protoplanetary disks with embedded planets using global 2-D and 3-D inviscid hydrodynamic simulations. We implement Lagrangian particles into magnetohydrodynamic code Athena with cylindrical coordinates and explore the behavior of dust grains with sizes spanning more than 6 orders of magnitude --- from the well-coupled to decoupled limits. We find two distinct outcomes depending on the mass of the embedded planet, which is varied between 8 M_earth to 9 M_{J}. In the presence of a low mass planet (8 M_earth), two narrow gaps start to open in the gas on each side of the planet where the density waves shock. Although these gaps are quite shallow, they dramatically affect particle drift speed and cause significant, axisymmetric dust depletion near the planet. On the other hand, a more massive planet (>0.1 M_{J}) carves out a deeper gap with sharp edges, which are unstable to the formation of vortices that later merge into a single vortex. The vort...
3D simulations of supernova remnants evolution including non-linear particle acceleration
Ferrand, Gilles; Ballet, Jean; Teyssier, Romain; Fraschetti, Federico
2009-01-01
If a sizeable fraction of the energy of supernova remnant shocks is channeled into energetic particles (commonly identified with Galactic cosmic rays), then the morphological evolution of the remnants must be distinctly modified. Evidence of such modifications has been recently obtained with the Chandra and XMM-Newton X-ray satellites. To investigate these effects, we coupled a semi-analytical kinetic model of shock acceleration with a 3D hydrodynamic code (by means of an effective adiabatic index). This enables us to study the time-dependent compression of the region between the forward and reverse shocks due to the back reaction of accelerated particles, concomitantly with the development of the Rayleigh-Taylor hydrodynamic instability at the contact discontinuity. Density profiles depend critically on the injection level eta of particles: for eta up to about 10^-4 modifications are weak and progressive, for eta of the order of 10^-3 modifications are strong and immediate. Nevertheless, the extension of the...
Full-field drift Hamiltonian particle orbits in 3D geometry
Cooper, W A; Graves, J P; Brunner, S [Ecole Polytechnique Federale de Lausanne (EPFL), Centre de Recherches en Physique des Plasmas, Association Euratom-Confederation Suisse, CH1015 Lausanne (Switzerland); Isaev, M Yu, E-mail: wilfred.cooper@epfl.ch [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation)
2011-02-15
A Hamiltonian/Lagrangian theory to describe guiding centre orbit drift motion which is canonical in the Boozer coordinate frame has been extended to include full electromagnetic perturbed fields in anisotropic pressure 3D equilibria with nested magnetic flux surfaces. A redefinition of the guiding centre velocity to eliminate the motion due to finite equilibrium radial magnetic fields and the choice of a gauge condition that sets the radial component of the electromagnetic vector potential to zero are invoked to guarantee that the Boozer angular coordinates retain the canonical structure. The canonical momenta are identified and the guiding centre particle radial drift motion and parallel gyroradius evolution are derived. The particle coordinate position is linearly modified by wave-particle interactions. All the nonlinear wave-wave interactions appear explicitly only in the evolution of the parallel gyroradius. The radial variation of the electrostatic potential is related to the binormal component of the displacement vector for MHD-type perturbations. The electromagnetic vector potential projections can then be determined from the electrostatic potential and the radial component of the MHD displacement vector.
A 3D Lagrangian particle model for direct plume gamma dose rate calculations
A fully 3D Lagrangian particle model has been presented for calculating the direct gamma dose rates due to a radionuclide plume in the atmosphere. A continuous release of radionuclides into the atmosphere was simulated by liberating a series of puffs (each containing 100 Lagrangian particles). These puffs were released with a constant time lag between the successive puffs. The Lagrangian particle trajectories were tracked for about 25 h in a turbulent atmosphere, with a specified wind field. The atmosphere turbulent/stability characteristics like wind velocity fluctuations, eddy lifetime, etc, were obtained from the reported data in the published literature. For calculating the direct plume gamma dose rates, a point isotropic source formula has been used with appropriate attenuation and build-up factors for the air medium. Each Lagrangian particle represented a point source whose radioactive strength was calculated from the known release rate. The dose rates at ground due to the radionuclide plume were calculated by adding the contribution from each Lagrangian particle in the domain. The numerically calculated dose rates were compared with the numerical results reported in the literature. An excellent comparison was observed for downwind distances up to about 20 km. However, for distances exceeding 20 km, the numerical data were below the reported results for the Gaussian plume model. This discrepancy was due to the vertical wind shear. It is concluded that a Gaussian plume model can be used for the concentration calculations provided the lateral dispersion parameter, σy, includes the effect of wind shear, for distances exceeding 20 km. (author)
Wu, Yingchun; Wu, Xuecheng; Yao, Longchao; Gréhan, Gérard; Cen, Kefa
2015-03-20
The 3D measurement of the particles in a gas-solid pipe flow is of great interest, but remains challenging due to curved pipe walls in various engineering applications. Because of the astigmatism induced by the pipe, concentric ellipse fringes in the hologram of spherical particles are observed in the experiments. With a theoretical analysis of the particle holography by an ABCD matrix, the in-focus particle image can be reconstructed by the modified convolution method and fractional Fourier transform. Thereafter, the particle size, 3D position, and velocity are simultaneously measured by digital holographic particle tracking velocimetry (DHPTV). The successful application of DHPTV to the particle size and 3D velocity measurement in a glass pipe's flow can facilitate its 3D diagnostics. PMID:25968543
3d and r,z particle simulations of Heavy Ion Fusion beams
The space-charge-dominated beams in a Heavy Ion beam driven inertial Fusion (HIF) accelerator must be focuses onto small (few mm) spots at the fusion target, and so preservation of a small emittance is crucial. The nonlinear beam self-fields can lead to emittance growth; thus, a self-consistent field description is necessary. We have developed a multi-dimensional time-dependent discrete particle simulation code, WARP, and are using it to study the behavior of HIF beams. The code's 3d package combines features of an accelerator code and a particle-in-cell (PIC) plasma simulation. Novel techniques allow it to follow beams through many accelerator elements over long distances and around bends. We have used the code to understand the emittance growth observed in the MBE4 experiment at. Lawrence Berkeley Laboratory (LBL) under conditions of aggressive drift-compression. We are currently applying it to LBL's planned ILSE experiments, and (most recently) to an ESQ injector option being evaluated for ILSE. The code's r, z package is being used to study the axial confinement afforded by the shaped ends of the accelerating pulses, and to study longitudinal instability induced by induction module impedance
Numerical simulation on the evolution of cloud particles in 3-D convective cloud
LIU XiaoLi; NIU ShengJie
2009-01-01
A 3-D convective cloud model with compressible non-hydrostatic dynamics and the spectral bin microphysics of a 2-D slab-symmetric model has been used to simulate an observed supercell storm occurring on 29 June, 2000 near Bird City, Kansas, USA. The main objective of this paper is to study the evolution of particles in this convective storm with bin spectral microphysics scheme. Graupels form and grow through two mechanisms, deposition and riming, with the riming process dominant on top of the inflow and in the upper portion of main updraft. Over the outflow and during the developing and mature stages of the storm, graupel particles mainly grow through deposition with dominant unimodal spectra. Most fall out after growing up. Reducing initial relative humidity disturbance (increasing initial potential temperature disturbance) has negative impact on the formation and growth of graupels over the inflow (outflow). This study shows that large graupel and hail could be suppressed by altering the deposition and coalescence process over the inflow and main updraft. At different locations of the convective cells and with different initial humidity and potential temperature disturbance, the graupel formation and growth mechanisms are different, so as to the feasible hail suppression locations and methods.
SKB is planning to perform a large-scale pillar stability experiment called APSE (Aespoe Pillar Stability Experiment) at Aespoe HRL. The study is focused on understanding and control of progressive rock failure in hard crystalline rock and damage caused by high stresses. The elastic thermo-mechanical modeling was carried out in three dimensions because of the complex test geometry and in-situ stress tensor by using a finite-difference modeling software FLAC3D. Cracking and damage formation were modeled in the area of interest (pillar between two large scale holes) in two dimensions by using the Particle Flow Code (PFC), which is based on particle mechanics. FLAC and PFC were coupled to minimize the computer resources and the computing time. According to the modeling the initial temperature rises from 15 deg C to about 65 deg C in the pillar area during the heating period of 120 days. The rising temperature due to thermal expansion induces stresses in the pillar area and after 120 days heating the stresses have increased about 33% from the excavation induced maximum stress of 150 MPa to 200 MPa in the end of the heating period. The results from FLAC3D model showed that only regions where the crack initiation stress has exceeded were identified and they extended to about two meters down the hole wall. These could be considered the areas where damage may occur during the in-situ test. When the other hole is pressurized with a 0.8 MPa confining pressure it yields that 5 MPa more stress is needed to damage the rock than without confining pressure. This makes the damaged area in some degree smaller. High compressive stresses in addition to some tensile stresses might induce some AE (acoustic emission) activity in the upper part of the hole from the very beginning of the test and are thus potential areas where AE activities may be detected. Monitoring like acoustic emissions will be measured during the test execution. The 2D coupled PFC-FLAC modeling indicated that
3D simulations of young core-collapse supernova remnants undergoing efficient particle acceleration
Ferrand, Gilles
2016-01-01
Within our Galaxy, supernova remnants are believed to be the major sources of cosmic rays up to the "knee". However important questions remain regarding the share of the hadronic and leptonic components, and the fraction of the supernova energy channelled into these components. We address such question by the means of numerical simulations that combine a hydrodynamic treatment of the shock wave with a kinetic treatment of particle acceleration. Performing 3D simulations allows us to produce synthetic projected maps and spectra of the thermal and non-thermal emission, that can be compared with multi-wavelength observations (in radio, X-rays, and gamma-rays). Supernovae come in different types, and although their energy budget is of the same order, their remnants have different properties, and so may contribute in different ways to the pool of Galactic cosmic-rays. Our first simulations were focused on thermonuclear supernovae, like Tycho's SNR, that usually occur in a mostly undisturbed medium. Here we present...
3D numerical model of the spherical particle saltation in a channel with a rough fixed bed
Lukerchenko, Nikolay; Piatsevich, Siarhei; Chára, Zdeněk; Vlasák, Pavel
2009-01-01
Roč. 57, č. 2 (2009), s. 100-112. ISSN 0042-790X R&D Projects: GA ČR GA103/06/1487 Institutional research plan: CEZ:AV0Z20600510 Keywords : 3D Saltation Model * Bed-Load Transport * Particle-Bed Collision * Particle Rotation * Particle Lateral Dispersion Subject RIV: BK - Fluid Dynamics Impact factor: 1.000, year: 2009
The leading-edge simulation software for 3D EM and charged particle dynamics, and its applications
The latest 3D electromagnetic and charged particle dynamics simulation software enables scientists and engineers to develop accelerators and its components in less time at a lower cost as compared to testing experientially, even when only personal computers are available. These simulations provide solutions for various applications in industry, medicine and research, including non-destructive inspection, radiation cancer treatment, medical device sterilization and synchrotron radiation. Additionally, we are benefiting from advances in computer hardware technology, especially GPU computing. This paper reviews the current status of the latest 3D EM and charged particle dynamics simulation software and its applications. (author)
Afik, Eldad
2013-01-01
Three-dimensional particle tracking is an essential tool in studying dynamics under the microscope, namely, cellular trafficking, bacteria taxis, fluid dynamics in microfluidics devices. The 3d position of a fluorescent particle can be determined using 2d imaging alone, by measuring the diffraction rings generated by an out-of-focus particle, imaged on a single camera. Here I present a ring detection algorithm exhibiting a high detection rate, which is robust to the challenges arising from particles vicinity. It is capable of real time analysis thanks to its high performance and low memory footprint. Many of the algorithmic concepts introduced can be advantageous in other cases, particularly for sparse data. The implementation is based on open-source and cross-platform software packages only, making it easy to distribute and modify. The image analysis algorithm, which is an offspring of the full 3d circle Hough transform, addresses the need to efficiently trace the trajectories of several particles concurrent...
Particle tracks in a hydro-cyclone generated both experimentally by positron emission particle tracking (PEPT) and numerically with Eulerian-Lagrangian CFD have been studied and compared. A hydro-cyclone with a cylinder-on-cone design was used in this study, the geometries used in the CFD simulations and in the experiments being identical. It is shown that it is possible to track a fast-moving particle in a hydro-cyclone using PEPT with high temporal and spatial resolutions. The numerical 3-D particle trajectories were generated using the Large Eddy Simulation (LES) turbulence model for the fluid and Lagrangian particle tracking for the particles. The behaviors of the particles were analyzed in detail and were found to be consistent between experiments and CFD simulations. The tracks of the particles are discussed and related to the fluid flow field visualized in the CFD simulations using the cross-sectional static pressure distribution. (authors)
A deterministic particle-tracking code (TRACK3D) has been developed to compute convective flow paths of conservative (nonreactive) contaminants through porous geological media. TRACK3D requires the groundwater velocity distribution, which, in our applications, results from flow simulations using AECL's MOTIF code. The MOTIF finite-element code solves the transient and steady-state coupled equations of groundwater flow, solute transport and heat transport in fractured/porous media. With few modifications, TRACK3D can be used to analyse the velocity distributions calculated by other finite-element or finite-difference flow codes. TRACK3D temporarily integrates the velocity distribution, in conjunction with the model geometry, to calculate convective flow paths, exit locations and travel times of as many as 1000 water-coincident particles released in the flow domain. Both steady-state and time-varying velocity distributions can be handled. TRACK3D requires the flow domain to be discretized by a finite-element mesh containing as many as 25 000 elements. The mesh can contain three-dimensional (3-D) eight-noded hexahedral elements representing a solid region, or two-dimensional four-noded quadrilateral elements representing a plane, which can be oriented arbitrarily in 3-D space. TRACK3D has been verified by comparison with analytical and numerical solutions, and in an independent confirmation by Ontario Hydro Research. This report describes the assumptions, limitations, organization, operation and applications of the TRACK3D code, and provides a comprehensive user's manual. TRACK3D has been applied by AECL Research in the concept assessment phase of the Canadian Nuclear Fuel Waste Management Program to analyse convective radionuclide pathways and travel times from a hypothetical vault containing (for example) CANDU reactor fuel waste, through the surrounding geologic formations to discharge locations in the biosphere. The program has been used to examine the sensitivity
CMOS MAPS in a Homogeneous 3D Process for Charged Particle Tracking
Manazza, A; Manghisoni, M; Re, V; Traversi, G; Bettarini, S; Forti, F; Morsani, F; Rizzo, G; 10.1109/TNS.2014.2299341
2014-01-01
This work presents the characterization of deep n-well (DNW) CMOS monolithic active pixel sensors (MAPS) fabricated in a 130 nm homogeneous, vertically integrated technology. An evaluation of the 3D MAPS device performance, designed for application of the experiments at the future high luminosity colliders, is provided through the characterization of the prototypes, including tests with infrared (IR) laser, 55Fe and 90Sr sources. The radiation hardness study of the technology will also be presented together with its impact on 3D DNW MAPS performance.
Choi, Jiwoong; Yin, Youbing; Hoffman, Eric; Tawhai, Merryn; Lin, Ching-Long
2010-11-01
Correct prediction of regional distribution of inhaled aerosol particles is vital to improve pulmonary medicine. Physiologically consistent regional ventilations of airflow and aerosol particles are simulated with a 3D-1D coupled subject-specific boundary condition (BC). In 3D CT-resolved 7-generation airways, large eddy simulations are performed to capture detailed airflow characteristics and Lagrangian particle simulations are carried to track the particle transport and deposition. Results are compared with two traditional outlet BCs: uniform velocity and uniform pressure. Proposed BC is eligible for physiologically consistent airflow distribution in the lung, while the others are not. The regional ventilation and deposition of particles reflect the regional ventilation of airflow. In this study, two traditional BCs yield up to 98% (334%) over-prediction in lobar particle ventilation (deposition) fraction. Upper to lower particle ventilation ratios of both left and right lungs read ˜0.4 with the proposed BC, while those for the other two BCs vary with the error up to 73%.
3D Shape-Encoded Particle Filter for Object Tracking and Its Application to Human Body Tracking
Chellappa R
2008-01-01
Full Text Available Abstract We present a nonlinear state estimation approach using particle filters, for tracking objects whose approximate 3D shapes are known. The unnormalized conditional density for the solution to the nonlinear filtering problem leads to the Zakai equation, and is realized by the weights of the particles. The weight of a particle represents its geometric and temporal fit, which is computed bottom-up from the raw image using a shape-encoded filter. The main contribution of the paper is the design of smoothing filters for feature extraction combined with the adoption of unnormalized conditional density weights. The "shape filter" has the overall form of the predicted 2D projection of the 3D model, while the cross-section of the filter is designed to collect the gradient responses along the shape. The 3D-model-based representation is designed to emphasize the changes in 2D object shape due to motion, while de-emphasizing the variations due to lighting and other imaging conditions. We have found that the set of sparse measurements using a relatively small number of particles is able to approximate the high-dimensional state distribution very effectively. As a measures to stabilize the tracking, the amount of random diffusion is effectively adjusted using a Kalman updating of the covariance matrix. For a complex problem of human body tracking, we have successfully employed constraints derived from joint angles and walking motion.
3D Shape-Encoded Particle Filter for Object Tracking and Its Application to Human Body Tracking
R. Chellappa
2008-03-01
Full Text Available We present a nonlinear state estimation approach using particle filters, for tracking objects whose approximate 3D shapes are known. The unnormalized conditional density for the solution to the nonlinear filtering problem leads to the Zakai equation, and is realized by the weights of the particles. The weight of a particle represents its geometric and temporal fit, which is computed bottom-up from the raw image using a shape-encoded filter. The main contribution of the paper is the design of smoothing filters for feature extraction combined with the adoption of unnormalized conditional density weights. The Ã¢Â€Âœshape filterÃ¢Â€Â has the overall form of the predicted 2D projection of the 3D model, while the cross-section of the filter is designed to collect the gradient responses along the shape. The 3D-model-based representation is designed to emphasize the changes in 2D object shape due to motion, while de-emphasizing the variations due to lighting and other imaging conditions. We have found that the set of sparse measurements using a relatively small number of particles is able to approximate the high-dimensional state distribution very effectively. As a measures to stabilize the tracking, the amount of random diffusion is effectively adjusted using a Kalman updating of the covariance matrix. For a complex problem of human body tracking, we have successfully employed constraints derived from joint angles and walking motion.
Wang, ChengYue; Gao, Qi; Wei, RunJie; Li, Tian; Wang, JinJun
2016-06-01
Volumetric measurement for the leading-edge vortex (LEV) breakdown of a delta wing has been conducted by three-dimensional (3D) flow visualization and tomographic particle image velocimetry (TPIV). The 3D flow visualization is employed to show the vortex structures, which was recorded by four cameras with high resolution. 3D dye streaklines of the visualization are reconstructed using a similar way of particle reconstruction in TPIV. Tomographic PIV is carried out at the same time using same cameras with the dye visualization. Q criterion is employed to identify the LEV. Results of tomographic PIV agree well with the reconstructed 3D dye streaklines, which proves the validity of the measurements. The time-averaged flow field based on TPIV is shown and described by sections of velocity and streamwise vorticity. Combining the two measurement methods sheds light on the complex structures of both bubble type and spiral type of breakdown. The breakdown position is recognized by investigating both the streaklines and TPIV velocity fields. Proper orthogonal decomposition is applied to extract a pair of conjugated helical instability modes from TPIV data. Therefore, the dominant frequency of the instability modes is obtained from the corresponding POD coefficients of the modes based on wavelet transform analysis.
Experimental and analytical characterization of the 3D motion of particles in acoustofluidic devices
Rossi, M.; Barnkob, Rune; Augustsson, P.; Marín, Á. G.; Muller, Peter Barkholt; Bruus, Henrik; Laurell, T.; Kähler, C. J.
2012-01-01
. Astigmatism Particle Tracking Velocimetry (APTV) was used to measure the three-dimensional trajectories, velocities and accelerations of the particles. The experiments show how the acoustic radiation force dominates for the large 5-µm particles, whereas the drag force from the acoustic streaming dominates for...
3D sensors, with electrodes micro-processed inside the silicon bulk using Micro-Electro-Mechanical System (MEMS) technology, were industrialized in 2012 and were installed in the first detector upgrade at the LHC, the ATLAS IBL in 2014. They are the radiation hardest sensors ever made. A new idea is now being explored to enhance the three-dimensional nature of 3D sensors by processing collecting electrodes at different depths inside the silicon bulk. This technique uses the electric field strength to suppress the charge collection effectiveness of the regions outside the p-n electrodes' overlap. Evidence of this property is supported by test beam data of irradiated and non-irradiated devices bump-bonded with pixel readout electronics and simulations. Applications include High-Luminosity Tracking in the high multiplicity LHC forward regions. This paper will describe the technical advantages of this idea and the tracking application rationale
Growth of a brittle crack (001) in 3D bcc iron crystal with a Cu nano-particle
Uhnáková, Alena; Machová, Anna; Hora, Petr; Červená, Olga
2014-01-01
Roč. 83, February (2014), s. 229-234. ISSN 0927-0256 R&D Projects: GA ČR GA101/09/1630 Institutional support: RVO:61388998 Keywords : brittle crack extension * 3D * mode I * bcc iron * Cu nano-particle * molecular dynamics * acoustic emission Subject RIV: JG - Metallurgy Impact factor: 2.131, year: 2014 http://www.sciencedirect.com/science/article/pii/S0927025613006575
Qian, Long; Lu, Yong; Zhong, Wenqi; Chen, Xi; Ren, Bing; Jin, Baosheng
2013-07-01
A novel fiber high speed photography method has been developed to measure particle phase velocity in a dense gas-solid flow. The measurement system mainly includes a fiber-optic endoscope, a high speed video camera, a metal halide light source and a powerful computer with large memory. The endoscope which could be inserted into the reactors is used to form motion images of particles within the measurement window illuminated by the metal halide lamp. These images are captured by the high speed video camera and processed through a series of digital image processing algorithms, such as calibration, denoising, enhancement and binarization in order to improve the image quality. Then particles' instantaneous velocity is figured out by tracking each particle in consecutive frames. Particle phase velocity is statistically calculated according to the probability of particle velocity in each frame within a time period. This system has been applied to the investigation of particles fluidization characteristics in a 3D spouted bed. The experimental results indicate that the particle fluidization feature in the region investigated could be roughly classified into three sections by particle phase vertical velocity and the boundary between the first section and the second is the surface where particle phase velocity tends to be 0, which is in good agreement with the results published in other literature.
Time dependence of Fe/O ratio within a 3D Solar Energetic Particle propagation model including drift
Dalla, S; Zelina, P; Laitinen, T
2016-01-01
Context. The intensity profiles of iron and oxygen in Solar Energetic Particle (SEP) events often display differences that result in a decreasing Fe/O ratio over time. The physical mechanisms behind this behaviour are not fully understood, but these observational signatures provide important tests of physical modelling efforts. Aims. In this paper we study the propagation of iron and oxygen SEP ions using a 3D model of propagation which includes the effect of guiding centre drift in a Parker spiral magnetic field. We derive time intensity profiles for a variety of observer locations and study the temporal evolution of the Fe/O ratio. Methods. We use a 3D full orbit test particle model which includes scattering. The configuration of the interplanetary magnetic field is a unipolar Parker spiral. Particles are released instantaneously from a compact region at 2 solar radii and allowed to propagate in 3D. Results. Both Fe and O experience significant transport across the magnetic field due to gradient and curvatu...
Full text: The finite number and limited toroidal extent of the TF coils cause a periodic variation of the toroidal field called the magnetic ripple. This ripple can provide a significant channel for fast particle leakage, leading to very localized fast particle loads on the walls. Ferromagnetic inserts will be embedded in the double wall structure of the vacuum vessel in order to reduce the ripple. In ITER the toroidal field deviations are locally further enhanced by the presence of discrete ferromagnetic structures, e.g. TBM. Thus, there are complex symmetry-breaking effects. It is not yet fully understood how superimposing the periodic ripple and a local perturbation affect the fast ion confinement and concerns have been voiced that the combined effect might lead to significant channelling of the alpha power. In this work, the wall power loads due to fusion-born alpha particles were restudied for a variety of cases addressing issues such as different wall configurations, proper inclusion of the TBM effect on the magnetic background, and the possible corrections to 3D equilibrium introduced by the ferromagnetic materials using the 3D equilibrium code, VMEC, since 3D corrections to the equilibrium might enhance the alpha particle loss. To properly include the TBM effect on the magnetic background, the FEMAG code was used, and the effect was calculated on the total field including the poloidal field by the plasma current as well as the vacuum field. In the VMEC analysis, it was found that the difference between a full 3D equilibrium reconstruction and 'an axisymmetric equilibrium + vacuum fields' was small. Thus, it was concluded that no 3D equilibrium reconstruction was needed and that it was sufficient to add the vacuum field perturbations onto an axisymmetric equilibrium. Under the new boundary condition, the wall load calculation was carried out by using ASCOT, DELTA5D, and F3D OFMC code. Including the plasma current contribution in the magnetic field
Implementation of a 3D plasma particle-in-cell code on a MIMD parallel computer
A three-dimensional plasma particle-in-cell (PIC) code has been implemented on the Intel Delta MIMD parallel supercomputer using the General Concurrent PIC algorithm. The GCPIC algorithm uses a domain decomposition to divide the computation among the processors: A processor is assigned a subdomain and all the particles in it. Particles must be exchanged between processors as they move. Results are presented comparing the efficiency for 1-, 2- and 3-dimensional partitions of the three dimensional domain. This algorithm has been found to be very efficient even when a large fraction (e.g. 30%) of the particles must be exchanged at every time step. On the 512-node Intel Delta, up to 125 million particles have been pushed with an electrostatic push time of under 500 nsec/particle/time step
3D Discrete Dislocation Dynamics Applied to Interactions between Dislocation Walls and Particles
Záležák, Tomáš; Dlouhý, Antonín
2012-01-01
Roč. 122, č. 3 (2012), s. 450-452. ISSN 0587-4246. [ International Symposium on Physics of Materials /12./ - ISPMA 12. Prague, 04.09.2011-08.09.2011] R&D Projects: GA ČR GD106/09/H035; GA ČR GA202/09/2073; GA MŠk OC 162 Institutional research plan: CEZ:AV0Z20410507 Keywords : 3D discrete dislocation dynamics * tilt boundary * migration * diffusion * pecipitation hardening Subject RIV: JG - Metallurgy Impact factor: 0.531, year: 2012
Real-time visual sensing system achieving high-speed 3D particle tracking with nanometer resolution.
Cheng, Peng; Jhiang, Sissy M; Menq, Chia-Hsiang
2013-11-01
This paper presents a real-time visual sensing system, which is created to achieve high-speed three-dimensional (3D) motion tracking of microscopic spherical particles in aqueous solutions with nanometer resolution. The system comprises a complementary metal-oxide-semiconductor (CMOS) camera, a field programmable gate array (FPGA), and real-time image processing programs. The CMOS camera has high photosensitivity and superior SNR. It acquires images of 128×120 pixels at a frame rate of up to 10,000 frames per second (fps) under the white light illumination from a standard 100 W halogen lamp. The real-time image stream is downloaded from the camera directly to the FPGA, wherein a 3D particle-tracking algorithm is implemented to calculate the 3D positions of the target particle in real time. Two important objectives, i.e., real-time estimation of the 3D position matches the maximum frame rate of the camera and the timing of the output data stream of the system is precisely controlled, are achieved. Two sets of experiments were conducted to demonstrate the performance of the system. First, the visual sensing system was used to track the motion of a 2 μm polystyrene bead, whose motion was controlled by a three-axis piezo motion stage. The ability to track long-range motion with nanometer resolution in all three axes is demonstrated. Second, it was used to measure the Brownian motion of the 2 μm polystyrene bead, which was stabilized in aqueous solution by a laser trapping system. PMID:24216655
Fully 3D Particle-in-Cell Simulation of Double Post-Hole Convolute on PTS Facility
Zhao, Hailong; Dong, Ye; Zhou, Haijing; Zou, Wenkang; Institute of Fluid Physics Collaboration; Institute of Applied Physics; Computational Mathematics Collaboration
2015-11-01
In order to get better understand of energy transforming and converging process during High Energy Density Physics (HEDP) experiments, fully 3D particle-in-cell (PIC) simulation code NEPTUNE3D was used to provide numerical approach towards parameters which could hardly be acquired through diagnostics. Cubic region (34cm × 34cm × 18cm) including the double post-hole convolute (DPHC) on the primary test stand (PTS) facility was chosen to perform a series of fully 3D PIC simulations, calculating ability of codes were tested and preliminary simulation results about DPHC on PTS facility were discussed. Taking advantages of 3D simulation codes and large-scale parallel computation, massive data (~ 250GB) could be acquired in less than 5 hours and clear process of current transforming and electron emission in DPHC were demonstrated with the help of visualization tools. Cold-chamber tests were performed during which only cathode electron emission was considered without temperature rise or ion emission, current loss efficiency was estimated to be 0.46% ~ 0.48% by comparisons between output magnetic field profiles with or without electron emission. Project supported by the National Natural Science Foundation of China (Grant No. 11205145, 11305015, 11475155).
Improvement of the 3D numerical model of the spherical particle saltation
Lukerchenko, Nikolay; Piatsevich, Siarhei; Chára, Zdeněk; Vlasák, Pavel
Tbilisi : Agricultural University of Wroclaw, Poland, 2006 - (Gochitashvili, T.; Sobota, J.), s. 177-186 ISBN 83-60574-00-6. [International Conference on Transport and Sedimentation of Solid Particles /13./. Tbilisi (GE), 18.09.2006-20.09.2006] R&D Projects: GA ČR GA103/06/1487 Institutional research plan: CEZ:AV0Z20600510 Keywords : particle saltation, * particle-bed collision * Magnus force * contact zone * numerical simulation * deviation angle * relative concentration Subject RIV: BK - Fluid Dynamics
Design of a 3D Digital Liquid Crystal Particle Thermometry and Velocimetry (3DDLCPT/V) System
Grothe, Rob; Rixon, Greg; Dabiri, Dana
2007-11-01
A novel 3D Digital Liquid Crystal Particle Thermometry and Velocimetry (3DDLCPT/V) system has been designed and fabricated. By combining 3D Defocusing Particle Image Velocimetry (3DDPIV) and Digital Particle Image Thermometry (DPIT) into one system, this technique provides simultaneous temperature and velocity data using temperature-sensitive liquid crystal particles (LCP) as flow sensors. A custom water-filled prism corrects for astigmatism caused by off-axis imaging. New optics equations are derived to account for multi-surface refractions. This redesign also maximizes the use of the CCD area to more efficiently image the volume of interest. Six CCD cameras comprise the imaging system, with three allocated for velocity measurements and three for temperature measurements. The cameras are optically aligned to sub-pixel accuracy using a precision grid and high-resolution translation stages. Two high-intensity custom-designed xenon flashlamps provide illumination. Temperature calibration of the LCP is then performed. These results and proof-of-concept experiments will be discussed in detail.
Collette, Robyn; Rosen, Daniel; Shirk, Kathryn
Microfluidic devices have high importance in fields such as bioanalysis because they can manipulate volumes of fluid in the range of microliters to picoliters. Small samples can be quickly and easily tested using complex microfluidic devices. Typically, these devices are created through lithography techniques, which can be costly and time consuming. It has been shown that inexpensive microfluidic devices can be produced quickly using a 3D printer and PDMS. However, a size limitation prohibits the fabrication of precisely controlled microchannels. By using shrinking materials in combination with 3D printing of flow-focusing geometries, this limitation can be overcome. This research seeks to employ these techniques to quickly fabricate an inexpensive, working device with three dimensional particle focusing capabilities. By modifying the channel geometry, colloidal particles in a solution will be focused into a single beam when passed through this device. The ability to focus particles is necessary for a variety of biological applications which requires precise detection and characterization of particles in a sample. We would like to thank the Shippensburg University Undergraduate Research Grant Program for their generous funding.
Interaction of particles with complex electrostatic structures and 3D clusters
Particles of micrometer size externally introduced in plasmas usually find their positions of levitation in the plasma sheath, where the gravity force is compensated by the strong electric field. Here due to electrostatic interaction they form different structures, which are interesting objects for the investigation of strongly coupled systems and critical phenomena. Because of the low damping (e.g. in comparison to colloidal suspension) it is possible to measure the dynamics up to the relevant highest frequency (e.g. Einstein frequency) at the most elementary level of single particle motion. The task of this work was to analyze the three dimensional structure, dynamical processes and the limit of the cooperative behavior in small plasma crystals. In addition to the study of the systems formed, the immersed particles themselves may be used for diagnostics of the plasma environment: estimation of parameters or monitoring of the processes inside plasma. The laboratory experiments are performed in two radio-frequency (RF) plasma reactors with parallel plate electrodes, where the lower electrode is a so-called ''adaptive electrode''. This electrode is segmented into 57 small ''pixels'' independently driven in DC (direct current) and/or RF voltage. When RF voltage is applied to one of these pixels, a bright localized glow, ''secondary plasma ball'', appears above. Three dimensional dust crystals with less than 100 particles are formed inside this ''plasma ball'' - the ideal conditions for the investigation of the transition from cluster systems to collective systems. The investigation of the particle interactions in crystals is performed with an optical diagnostic, which allows determination of all three particle coordinates simultaneously with time resolution of 0.04 sec. The experimental results are: 1. The binary interaction among particles in addition to the repelling Coulomb force exhibits also an attractive part, which is experimentally determined for the first
Interaction of particles with complex electrostatic structures and 3D clusters
Antonova, Tetyana
2007-10-16
Particles of micrometer size externally introduced in plasmas usually find their positions of levitation in the plasma sheath, where the gravity force is compensated by the strong electric field. Here due to electrostatic interaction they form different structures, which are interesting objects for the investigation of strongly coupled systems and critical phenomena. Because of the low damping (e.g. in comparison to colloidal suspension) it is possible to measure the dynamics up to the relevant highest frequency (e.g. Einstein frequency) at the most elementary level of single particle motion. The task of this work was to analyze the three dimensional structure, dynamical processes and the limit of the cooperative behavior in small plasma crystals. In addition to the study of the systems formed, the immersed particles themselves may be used for diagnostics of the plasma environment: estimation of parameters or monitoring of the processes inside plasma. The laboratory experiments are performed in two radio-frequency (RF) plasma reactors with parallel plate electrodes, where the lower electrode is a so-called 'adaptive electrode'. This electrode is segmented into 57 small 'pixels' independently driven in DC (direct current) and/or RF voltage. When RF voltage is applied to one of these pixels, a bright localized glow, 'secondary plasma ball', appears above. Three dimensional dust crystals with less than 100 particles are formed inside this 'plasma ball' - the ideal conditions for the investigation of the transition from cluster systems to collective systems. The investigation of the particle interactions in crystals is performed with an optical diagnostic, which allows determination of all three particle coordinates simultaneously with time resolution of 0.04 sec. The experimental results are: 1. The binary interaction among particles in addition to the repelling Coulomb force exhibits also an attractive part, which is
Gravity driven deterministic lateral displacement for suspended particles in a 3D obstacle array.
Du, Siqi; Drazer, German
2016-01-01
We present a simple modification to enhance the separation ability of deterministic lateral displacement (DLD) systems by expanding the two-dimensional nature of these devices and driving the particles into size-dependent, fully three-dimensional trajectories. Specifically, we drive the particles through an array of long cylindrical posts, such that they not only move parallel to the basal plane of the posts as in traditional two-dimensional DLD systems (in-plane motion), but also along the axial direction of the solid posts (out-of-plane motion). We show that the (projected) in-plane motion of the particles is completely analogous to that observed in 2D-DLD systems. In fact, a theoretical model originally developed for force-driven, two-dimensional DLD systems accurately describes the experimental results. More importantly, we analyze the particles out-of-plane motion and observe, for certain orientations of the driving force, significant differences in the out-of-plane displacement depending on particle size. Therefore, taking advantage of both the in-plane and out-of-plane motion of the particles, it is possible to achieve the simultaneous fractionation of a polydisperse suspension into multiple streams. PMID:27526935
Felician ALECU
2010-01-01
Full Text Available Many professionals and 3D artists consider Blender as being the best open source solution for 3D computer graphics. The main features are related to modeling, rendering, shading, imaging, compositing, animation, physics and particles and realtime 3D/game creation.
3D Joint Speaker Position and Orientation Tracking with Particle Filters
Carlos Segura
2014-01-01
Full Text Available This paper addresses the problem of three-dimensional speaker orientation estimation in a smart-room environment equipped with microphone arrays. A Bayesian approach is proposed to jointly track the location and orientation of an active speaker. The main motivation is that the knowledge of the speaker orientation may yield an increased localization performance and vice versa. Assuming that the sound produced by the speaker is originated from his mouth, the center of the head is deduced based on the estimated head orientation. Moreover, the elevation angle of the head of the speaker can be partly inferred from the fast vertical movements of the computed mouth location. In order to test the performance of the proposed algorithm, a new multimodal dataset has been recorded for this purpose, where the corresponding 3D orientation angles are acquired by an inertial measurement unit (IMU provided by accelerometers, magnetometers and gyroscopes in the three-axes. The proposed joint algorithm outperforms a two-step approach in terms of localization and orientation angle precision assessing the superiority of the joint approach.
3D joint speaker position and orientation tracking with particle filters.
Segura, Carlos; Hernando, Javier
2014-01-01
This paper addresses the problem of three-dimensional speaker orientation estimation in a smart-room environment equipped with microphone arrays. A Bayesian approach is proposed to jointly track the location and orientation of an active speaker. The main motivation is that the knowledge of the speaker orientation may yield an increased localization performance and vice versa. Assuming that the sound produced by the speaker is originated from his mouth, the center of the head is deduced based on the estimated head orientation. Moreover, the elevation angle of the head of the speaker can be partly inferred from the fast vertical movements of the computed mouth location. In order to test the performance of the proposed algorithm, a new multimodal dataset has been recorded for this purpose, where the corresponding 3D orientation angles are acquired by an inertial measurement unit (IMU) provided by accelerometers, magnetometers and gyroscopes in the three-axes. The proposed joint algorithm outperforms a two-step approach in terms of localization and orientation angle precision assessing the superiority of the joint approach. PMID:24481230
陈华毅; 杨明发
2015-01-01
Deals with 3D temperature estimation for the asynchronous motor Y100L2-4. According to the structure characteristics and electromagnetic parameters, the thermal fields of steady state operation with rated load has been analyzed to extract the heat source of the motor, as the foundation of the steady temperature distribution. The heat dissipation coefficient of each part in motor and the equivalent heat transfer coefficient of air gap between the rotor and stator were analyzed. According to the boundary condition and the equivalent hypothesis and material properties of the motor, the temperature field was derive by One-way coupled simulation of finite element software, based on the simulation results of electromagnetic field. the simulation results have higher accuracy was verify by comparing with the experimental data.%以型号为Y100L2-4的异步电机为对象，建立了三维有限元模型。根据样机的结构特征和电磁参数，仿真计算出了样机额定负载下运行至稳态的电磁场，用以提取较为精确的发热源，进而计算其稳态温度分布。分析了电机各部分散热系数、定转子间气隙的等效传热系数，依据电机的边界条件、等效假设和材料属性，以电磁场仿真结果为基础，利用有限元软件单向耦合出相应的温度场分布图。最后通过与试验数据对比，验证仿真结果有更高的准确性。
White, Brian; Squires, Todd M.; Hain, Timothy C.; Stone, Howard A.
2003-11-01
Benign paroxysmal positional vertigo (BPPV) is a mechanical disorder of the vestibular system where micron-size crystals abnormally drift into the semicircular canals of the inner ear that sense angular motion of the head. Sedimentation of these crystals causes sensation of motion after true head motion has stopped: vertigo results. The usual clinical treatment is through a series of head maneuvers designed to move the particles into a less sensitive region of the canal system. We present a three-dimensional model to simulate treatment of BPPV by determining the complete hydrodynamic motion of the particles through the course of a therapeutic maneuver while using a realistic representation of the actual geometry. Analyses of clinical maneuvers show the parameter range for which they are effective, and indicate inefficiencies in current practice. In addition, an optimization process determines the most effective head maneuver, which significantly differs from those currently in practice.
Yu, Peicheng; Xu, Xinlu; Davidson, Asher; Tableman, Adam; Dalichaouch, Thamine; Li, Fei; Meyers, Michael D.; An, Weiming; Tsung, Frank S.; Decyk, Viktor K.; Fiuza, Frederico; Vieira, Jorge; Fonseca, Ricardo A.; Lu, Wei; Silva, Luis O.; Mori, Warren B.
2016-07-01
When modeling laser wakefield acceleration (LWFA) using the particle-in-cell (PIC) algorithm in a Lorentz boosted frame, the plasma is drifting relativistically at βb c towards the laser, which can lead to a computational speedup of ∼ γSUB>/bSUB>2 = (1 -space-time distribution of the LWFA data in the lab and boosted frame, we propose to use a moving window to follow the drifting plasma, instead of following the laser driver as is done in the LWFA lab frame simulations, in order to further reduce the computational loads. We describe the details of how the NCI is mitigated for the quasi-3D geometry, the setups for simulations which combine the Lorentz boosted frame, quasi-3D geometry, and the use of a moving window, and compare the results from these simulations against their corresponding lab frame cases. Good agreement is obtained among these sample simulations, particularly when there is no self-trapping, which demonstrates it is possible to combine the Lorentz boosted frame and the quasi-3D algorithms when modeling LWFA. We also discuss the preliminary speedups achieved in these sample simulations.
Li, Ming
2012-10-18
This article presents a dielectrophoresis (DEP)-based microfluidic device with the three-dimensional (3D) microelectrode configuration for concentrating and separating particles in a continuous throughflow. The 3D electrode structure, where microelectrode array are patterned on both the top and bottom surfaces of the microchannel, is composed of three units: focusing, aligning and trapping. As particles flowing through the microfluidic channel, they are firstly focused and aligned by the funnel-shaped and parallel electrode array, respectively, before being captured at the trapping unit due to negative DEP force. For a mixture of two particle populations of different sizes or dielectric properties, with a careful selection of suspending medium and applied field, the population exhibits stronger negative DEP manipulated by the microelectrode array and, therefore, separated from the other population which is easily carried away toward the outlet due to hydrodynamic force. The functionality of the proposed microdevice was verified by concentrating different-sized polystyrene (PS) microparticles and yeast cells dynamically flowing in the microchannel. Moreover, separation based on size and dielectric properties was achieved by sorting PS microparticles, and isolating 5 μm PS particles from yeast cells, respectively. The performance of the proposed micro-concentrator and separator was also studied, including the threshold voltage at which particles begin to be trapped, variation of cell-trapping efficiency with respect to the applied voltage and flow rate, and the efficiency of separation experiments. The proposed microdevice has various advantages, including multi-functionality, improved manipulation efficiency and throughput, easy fabrication and operation, etc., which shows a great potential for biological, chemical and medical applications. © 2012 Springer-Verlag Berlin Heidelberg.
A 3D photograph with 92 million pixels for tagging particles
Antonella Del Rosso
2013-01-01
Where was a given particle born? How can we tag it precisely enough to be able to then follow it along its track and through its decays? This is the job of the pixel detector installed at the heart of the ATLAS detector, only centimeters away from the LHC collisions. In order to improve its identification and tagging capabilities, the ATLAS collaboration has recently taken a big step towards the completion of the upgrade of its Pixel detector, which will include the insertion of a brand-new layer of 12 million pixels. The 7 metre long beryllium beam pipe inserted in the carbon-fibre positioning tool is being prepared ready for the new innermost layer of the Pixel detector to be mounted. Photo: ATLAS Collaboration. With its three layers and 80 million channels concentrated in 2.2 square metres, the ATLAS pixel detector was already the world’s largest pixel-based system used in particle physics. Its excellent performance was instrumental in the discovery of the Higgs boson in July ...
3D dual-virtual-pinhole assisted single particle tracking microscopy
Ma, Ye; Wang, Yifan; Zhou, Xin; Kuang, Cuifang; Liu, Xu
2014-07-01
We propose a novel approach for high-speed, three-dimensional single particle tracking (SPT), which we refer to as dual-virtual-pinhole assisted single particle tracking microscopy (DVPaSPTM). DVPaSPTM system can obtain axial information of the sample without optical or mechanical depth scanning, so as to offer numbers of advantages including faster imaging, improved efficiency and a great reduction of photobleaching and phototoxicity. In addition, by the use of the dual-virtual-pinhole, the effect that the quantum yield exerts to the fluorescent signal can be eliminated, which makes the measurement independent of the surroundings and increases the accuracy of the result. DVPaSPTM system measures the intensity within different virtual pinholes of which the radii are given by the host computer. Axial information of fluorophores can be measured by the axial response curve through the ratio of intensity signals. We demonstrated the feasibility of the proposed method by a series of experiments. Results showed that the standard deviation of the axial measurement was 19.2 nm over a 2.5 μm range with 30 ms temporal resolution.
Afik, Eldad
2015-09-01
Three-dimensional particle tracking is an essential tool in studying dynamics under the microscope, namely, fluid dynamics in microfluidic devices, bacteria taxis, cellular trafficking. The 3d position can be determined using 2d imaging alone by measuring the diffraction rings generated by an out-of-focus fluorescent particle, imaged on a single camera. Here I present a ring detection algorithm exhibiting a high detection rate, which is robust to the challenges arising from ring occlusion, inclusions and overlaps, and allows resolving particles even when near to each other. It is capable of real time analysis thanks to its high performance and low memory footprint. The proposed algorithm, an offspring of the circle Hough transform, addresses the need to efficiently trace the trajectories of many particles concurrently, when their number in not necessarily fixed, by solving a classification problem, and overcomes the challenges of finding local maxima in the complex parameter space which results from ring clusters and noise. Several algorithmic concepts introduced here can be advantageous in other cases, particularly when dealing with noisy and sparse data. The implementation is based on open-source and cross-platform software packages only, making it easy to distribute and modify. It is implemented in a microfluidic experiment allowing real-time multi-particle tracking at 70 Hz, achieving a detection rate which exceeds 94% and only 1% false-detection.
Rottner, L.; Baehr, C.
2014-12-01
Turbulent phenomena in the atmospheric boundary layer (ABL) are characterized by small spatial and temporal scales which make them difficult to observe and to model.New remote sensing instruments, like Doppler Lidar, give access to fine and high-frequency observations of wind in the ABL. This study suggests to use a method of nonlinear estimation based on these observations to reconstruct 3D wind in a hemispheric volume, and to estimate atmospheric turbulent parameters. The wind observations are associated to particle systems which are driven by a local turbulence model. The particles have both fluid and stochastic properties. Therefore, spatial averages and covariances may be deduced from the particles. Among the innovative aspects, we point out the absence of the common hypothesis of stationary-ergodic turbulence and the non-use of particle model closure hypothesis. Every time observations are available, 3D wind is reconstructed and turbulent parameters such as turbulent kinectic energy, dissipation rate, and Turbulent Intensity (TI) are provided. This study presents some results obtained using real wind measurements provided by a five lines of sight Lidar. Compared with classical methods (e.g. eddy covariance) our technic renders equivalent long time results. Moreover it provides finer and real time turbulence estimations. To assess this new method, we suggest computing independently TI using different observation types. First anemometer data are used to have TI reference.Then raw and filtered Lidar observations have also been compared. The TI obtained from raw data is significantly higher than the reference one, whereas the TI estimated with the new algorithm has the same order.In this study we have presented a new class of algorithm to reconstruct local random media. It offers a new way to understand turbulence in the ABL, in both stable or convective conditions. Later, it could be used to refine turbulence parametrization in meteorological meso-scale models.
Electrostatic environment near lunar vertical hole: 3D plasma particle simulations
Miyake, Yohei; Nishino, Masaki N.
2015-11-01
The dayside electrostatic environment near the lunar surface is governed by interactions among the solar wind plasma, photoelectrons, and the charged lunar surface, providing topologically complex boundaries to the plasma. Three-dimensional, particle-in-cell simulations are applied to recently discovered vertical holes on the Moon, which have spatial scales of tens of meters and greater depth-to-diameter ratios than typical impact craters. The vertical wall of the hole introduces a new boundary for both photo and solar wind electrons. The current balance condition established at a hole bottom is altered by the limited solar wind electron penetration into the hole due to loss at the wall and photoelectron current path connecting the hole bottom and wall surfaces. The self-consistent modeling not only reproduces intense differential charging between sunlit and shadowed surfaces, but also reveals the potential difference between sunlit surfaces inside and outside the hole, demonstrating the uniqueness of the near-hole electrostatic environment.
The linear Boltzmann transport equation (BTE) is an integro-differential equation arising in deterministic models of neutral and charged particle transport. In slab (one-dimensional Cartesian) geometry and certain higher-dimensional cases, Diffusion Synthetic Acceleration (DSA) is known to be an effective algorithm for the iterative solution of the discretized BTE. Fourier and asymptotic analyses have been applied to various idealizations (e.g., problems on infinite domains with constant coefficients) to obtain sharp bounds on the convergence rate of DSA in such cases. While DSA has been shown to be a highly effective acceleration (or preconditioning) technique in one-dimensional problems, it has been observed to be less effective in higher dimensions. This is due in part to the expense of solving the related diffusion linear system. We investigate here the effectiveness of a parallel semicoarsening multigrid (SMG) solution approach to DSA preconditioning in several three dimensional problems. In particular, we consider the algorithmic and implementation scalability of a parallel SMG-DSA preconditioner on several types of test problems
3D Particle Track Reconstrution in a Single Layer Cadmium-Telluride Hybrid Active Pixel Detector
Filipenko, Mykhaylo; Anton, Gisela; Michel, Thilo
2014-01-01
In the past 20 years the search for neutrinoless double beta decay has driven many developements in all kind of detector technology. A new branch in this field are highly-pixelated semiconductor detectors - such as the CdTe-Timepix detectors. It compromises a cadmium-telluride sensor of 14 mm x 14 mm x 1 mm size with an ASIC which has 256 x 256 pixel of 55 \\textmu m pixel pitch and can be used to obtain either spectroscopic or timing information in every pixel. In regular operation it can provide a 2D projection of particle trajectories; however, three dimensional trajectories are desirable for neutrinoless double beta decay and other applications. In this paper we present a method to obtain such trajectories. The method was developed and tested with simulations that assume some minor modifications to the Timepix ASIC. Also, we were able to test the method experimentally and in the best case achieved a position resolution of about 90 \\textmu m with electrons of 4.4 GeV.
An integrated 3D sound intensity sensor using four-wire particle velocity sensors: II. Modelling
The sensitivity of a micromachined acoustic sensor consisting of four hot-wire particle velocity sensors is analysed theoretically and experimentally. The device and its fabrication have been presented in part 1 of this paper (Yntema et al 2010 J. Micromech. Microeng. 20 015042). A relatively straightforward analytical model is presented that describes both the air flow around the probe and the temperature profile around the heated wires. The presence of the chip surface near the heated wires influences the fluid flow around the wires, while it also affects the temperature distribution in the probe by altering the direction of heat transport. Both effects result into a modified angular dependence of the sensor sensitivity with respect to the normal 'figure-of-eight' figure of the response. By means of finite elements software, the thermal and the acoustic flow behaviour of the sensor are also investigated numerically, both effects together and each apart, and the results are compared to the analytical model. Comparison with the experimental data is presented, showing that the model is appropriate to describe the angular dependence and the magnitude of the sensor response. It is concluded that the perturbed air flow due to the chip surface is the dominant reason for the observed angular sensitivity
Ferrand, Gilles; Safi-Harb, Samar
2014-01-01
Supernova remnants are believed to be the major contributors to Galactic cosmic rays. In this paper, we explore how the non-thermal emission from young remnants can be used to probe the production of energetic particles at the shock (both protons and electrons). Our model couples hydrodynamic simulations of a supernova remnant with a kinetic treatment of particle acceleration. We include two important back-reaction loops upstream of the shock: energetic particles can (i) modify the flow structure and (ii) amplify the magnetic field. As the latter process is not fully understood, we use different limit cases that encompass a wide range of possibilities. We follow the history of the shock dynamics and of the particle transport downstream of the shock, which allows us to compute the non-thermal emission from the remnant at any given age. We do this in 3D, in order to generate projected maps that can be compared with observations. We observe that completely different recipes for the magnetic field can lead to sim...
Guildenbecher, Daniel R.; Gao, Jian; Reu, Phillip L.; Chen, Jun
2013-01-01
The accuracy of digital in-line holography to detect particle position and size within a 3D domain is evaluated with particular focus placed on detection of nonspherical particles. Dimensionless models are proposed for simulation of holograms from single particles, and these models are used to evaluate the uncertainty of existing particle detection methods. From the lessons learned, a new hybrid method is proposed. This method features automatic determination of optimum thresholds, and simulations indicate improved accuracy compared to alternative methods. To validate this, experiments are performed using quasi-stationary, 3D particle fields with imposed translations. For the spherical particles considered in experiments, the proposed hybrid method resolves mean particle concentration and size to within 4% of the actual value, while the standard deviation of particle depth is less than two particle diameters. Initial experimental results for nonspherical particles reveal similar performance.
Jacques Georgy
2011-04-01
Full Text Available Satellite navigation systems such as the global positioning system (GPS are currently the most common technique used for land vehicle positioning. However, in GPS-denied environments, there is an interruption in the positioning information. Low-cost micro-electro mechanical system (MEMS-based inertial sensors can be integrated with GPS and enhance the performance in denied GPS environments. The traditional technique for this integration problem is Kalman filtering (KF. Due to the inherent errors of low-cost MEMS inertial sensors and their large stochastic drifts, KF, with its linearized models, has limited capabilities in providing accurate positioning. Particle filtering (PF was recently suggested as a nonlinear filtering technique to accommodate for arbitrary inertial sensor characteristics, motion dynamics and noise distributions. An enhanced version of PF called the Mixture PF is utilized in this study to perform tightly coupled integration of a three dimensional (3D reduced inertial sensors system (RISS with GPS. In this work, the RISS consists of one single-axis gyroscope and a two-axis accelerometer used together with the vehicle’s odometer to obtain 3D navigation states. These sensors are then integrated with GPS in a tightly coupled scheme. In loosely-coupled integration, at least four satellites are needed to provide acceptable GPS position and velocity updates for the integration filter. The advantage of the tightly-coupled integration is that it can provide GPS measurement update(s even when the number of visible satellites is three or lower, thereby improving the operation of the navigation system in environments with partial blockages by providing continuous aiding to the inertial sensors even during limited GPS satellite availability. To effectively exploit the capabilities of PF, advanced modeling for the stochastic drift of the vertically aligned gyroscope is used. In order to benefit from measurement updates for such drift
Brücker, Ch.
1995-08-01
Scanning-Particle-Image-Velocimetry Technique (SPIV), introduced by Brücker (1992) and Brücker and Althaus (1992), offers the quantitative investigation of three-dimensional vortical structures in unsteady flows. On principle, this technique combines classical Particle-Image-Velocimetry (PIV) with volume scanning using a scanning light-sheet. In our previous studies, single scans obtained from photographic frame series were evaluated to show the instantaneous vortical structure of the respective flow phenomena. Here, continuous video recordings are processed to capture also the temporal information for the study of the set-up of 3D effects in the cylinder wake. The flow is continuously sampled in depth by the scanning light-sheet and in each of the parallel planes frame-to-frame cross-correlation of the video images (DPIV) is applied to obtain the 2D velocity field. Because the scanning frequency and repetition rate is high in comparison with the characteristic time-scale of the flow, the evaluation provides a complete time-record of the 3D flow during the starting process. With use of the continuity concept as described by Robinson and Rockwell (1993), we obtained in addition the out-of-plane component of the velocity in spanwise direction. This in view, the described technique enabled the reconstruction of the three-dimensional time-dependent velocity and vorticity field. The visualization of the dynamical behaviour of these quantities as, e.g. by video, gave a good impression of the spanwise flow showing the “tornado-like” suction effect of the starting vortices.
Metere, Alfredo; Dzugutov, Mikhail
2015-01-01
We present a new program able to perform unique visual analysis on generic particle systems: PASYVAT (PArticle SYstem Visual Analysis Tool). More specifically, it can perform a selection of multiple interparticle distance ranges from a radial distribution function (RDF) plot and display them in 3D as bonds. This software can be used with any data set representing a system of particles in 3D. In this manuscript the reader will find a description of the program and its internal structure, with emphasis on its applicability in the study of certain particle configurations, obtained from classical molecular dynamics simulation in condensed matter physics.
Lagrangian 3D particle tracking in high-speed flows: Shake-The-Box for multi-pulse systems
Novara, Matteo; Schanz, Daniel; Reuther, Nico; Kähler, Christian J.; Schröder, Andreas
2016-08-01
The Shake-The-Box (STB) particle tracking technique, recently introduced for time-resolved 3D particle image velocimetry (PIV) images, is applied here to data from a multi-pulse investigation of a turbulent boundary layer flow with adverse pressure gradient in air at 36 m/s ( Re τ = 10,650). The multi-pulse acquisition strategy allows for the recording of four-pulse long time-resolved sequences with a time separation of a few microseconds. The experimental setup consists of a dual-imaging system and a dual-double-cavity laser emitting orthogonal polarization directions to separate the four pulses. The STB particle triangulation and tracking strategy is adapted here to cope with the limited amount of realizations available along the time sequence and to take advantage of the ghost track reduction offered by the use of two independent imaging systems. Furthermore, a correction scheme to compensate for camera vibrations is discussed, together with a method to accurately identify the position of the wall within the measurement domain. Results show that approximately 80,000 tracks can be instantaneously reconstructed within the measurement volume, enabling the evaluation of both dense velocity fields, suitable for spatial gradients evaluation, and highly spatially resolved boundary layer profiles. Turbulent boundary layer profiles obtained from ensemble averaging of the STB tracks are compared to results from 2D-PIV and long-range micro particle tracking velocimetry; the comparison shows the capability of the STB approach in delivering accurate results across a wide range of scales.
Saha, Debashish; Babler, Matthaus U; Holzner, Markus; Soos, Miroslav; Lüthi, Beat; Liberzon, Alex; Kinzelbach, Wolfgang
2016-01-12
Aggregates grown in mild shear flow are released, one at a time, into homogeneous isotropic turbulence, where their motion and intermittent breakup is recorded by three-dimensional particle tracking velocimetry (3D-PTV). The aggregates have an open structure with a fractal dimension of ∼2.2, and their size is 1.4 ± 0.4 mm, which is large, compared to the Kolmogorov length scale (η = 0.15 mm). 3D-PTV of flow tracers allows for the simultaneous measurement of aggregate trajectories and the full velocity gradient tensor along their pathlines, which enables us to access the Lagrangian stress history of individual breakup events. From this data, we found no consistent pattern that relates breakup to the local flow properties at the point of breakup. Also, the correlation between the aggregate size and both shear stress and normal stress at the location of breakage is found to be weaker, when compared with the correlation between size and drag stress. The analysis suggests that the aggregates are mostly broken due to the accumulation of the drag stress over a time lag on the order of the Kolmogorov time scale. This finding is explained by the fact that the aggregates are large, which gives their motion inertia and increases the time for stress propagation inside the aggregate. Furthermore, it is found that the scaling of the largest fragment and the accumulated stress at breakup follows an earlier established power law, i.e., dfrag ∼ σ(-0.6) obtained from laminar nozzle experiments. This indicates that, despite the large size and the different type of hydrodynamic stress, the microscopic mechanism causing breakup is consistent over a wide range of aggregate size and stress magnitude. PMID:26646289
Asynchronous Anytime Sequential Monte Carlo
Paige, Brooks; Wood, Frank; Doucet, Arnaud; Teh, Yee Whye
2014-01-01
We introduce a new sequential Monte Carlo algorithm we call the particle cascade. The particle cascade is an asynchronous, anytime alternative to traditional particle filtering algorithms. It uses no barrier synchronizations which leads to improved particle throughput and memory efficiency. It is an anytime algorithm in the sense that it can be run forever to emit an unbounded number of particles while keeping within a fixed memory budget. We prove that the particle cascade is an unbiased mar...
Bartzke, Gerhard; Kuhlmann, Jannis; Huhn, Katrin
2016-04-01
The entrainment of single grains and, hence, their erosion characteristics are dependent on fluid forcing, grain size and density, but also shape variations. To quantitatively describe and capture the hydrodynamic conditions around individual grains, researchers commonly use empirical approaches such as laboratory flume tanks. Nonetheless, it is difficult with such physical experiments to measure the flow velocities in the direct vicinity or within the pore spaces of sediments, at a sufficient resolution and in a non-invasive way. As a result, the hydrodynamic conditions in the water column, at the fluid-porous interface and within pore spaces of a granular medium of various grain shapes is not yet fully understood. For that reason, there is a strong need for numerical models, since these are capable of quantifying fluid speeds within a granular medium. A 3D-SPH (Smooth Particle Hydrodynamics) numerical wave tank model was set up to provide quantitative evidence on the flow velocities in the direct vicinity and in the interior of granular beds composed of two shapes as a complementary method to the difficult task of in situ measurement. On the basis of previous successful numerical wave tank models with SPH, the model geometry was chosen in dimensions of X=2.68 [m], Y=0.48 [m], and Z=0.8 [m]. Three suites of experiments were designed with a range of particle shape models: (1) ellipsoids with the long axis oriented in the across-stream direction, (2) ellipsoids with the long axis oriented in the along-stream direction, and (3) spheres. Particle diameters ranged from 0.04 [m] to 0.08 [m]. A wave was introduced by a vertical paddle that accelerated to 0.8 [m/s] perpendicular to the granular bed. Flow measurements showed that the flow velocity values into the beds were highest when the grains were oriented across the stream direction and lowest in case when the grains were oriented parallel to the stream, indicating that the model was capable to simulate simultaneously
1 - Description of program or function: PARTISN (Parallel, Time-Dependent SN) is the evolutionary successor to CCC-0547/DANTSYS. User input and cross section formats are very similar to that of DANTSYS. The linear Boltzmann transport equation is solved for neutral particles using the deterministic (SN) method. Both the static (fixed source or eigenvalue) and time-dependent forms of the transport equation are solved in forward or adjoint mode. Vacuum, reflective, periodic, white, or inhomogeneous boundary conditions are solved. General anisotropic scattering and inhomogeneous sources are permitted. PARTISN solves the transport equation on orthogonal (single level or block-structured AMR) grids in 1-D (slab, two-angle slab, cylindrical, or spherical), 2-D (X-Y, R-Z, or R-T) and 3-D (X-Y-Z or R-Z-T) geometries. 2 - Methods:PARTISN numerically solves the multigroup form of the neutral-particle Boltzmann transport equation. The discrete-ordinates form of approximation is used for treating the angular variation of the particle distribution. For curvilinear geometries, diamond differencing is used for angular discretization. The spatial discretizations may be either low-order (diamond difference or Adaptive Weighted Diamond Difference (AWDD)) or higher-order (linear discontinuous or exponential discontinuous). Negative fluxes are eliminated by a local set-to-zero-and-correct algorithm for the diamond case (DD/STZ). Time differencing is Crank-Nicholson (diamond), also with a set-to-zero fix-up scheme. Both inner and outer iterations can be accelerated using the diffusion synthetic acceleration method, or transport synthetic acceleration can be used to accelerate the inner iterations. The diffusion solver uses either the conjugate gradient or multigrid method. Chebyshev acceleration of the fission source is used. The angular source terms may be treated either via standard PN expansions or Galerkin scattering. An option is provided for strictly positive scattering sources
Hu, Z. W.; Winarski, R. P.
2016-09-01
Unlocking the 3-D structure and properties of intact chondritic porous interplanetary dust particles (IDPs) in nanoscale detail is challenging, which is also complicated by atmospheric entry heating, but is important for advancing our understanding of the formation and origins of IDPs and planetary bodies as well as dust and ice agglomeration in the outer protoplanetary disk. Here, we show that indigenous pores, pristine grains, and thermal alteration products throughout intact particles can be noninvasively visualized and distinguished morphologically and microstructurally in 3-D detail down to ~10 nm by exploiting phase contrast X-ray nanotomography. We have uncovered the surprisingly intricate, submicron, and nanoscale pore structures of a ~10-μm-long porous IDP, consisting of two types of voids that are interconnected in 3-D space. One is morphologically primitive and mostly submicron-sized intergranular voids that are ubiquitous; the other is morphologically advanced and well-defined intragranular nanoholes that run through the approximate centers of ~0.3 μm or lower submicron hollow grains. The distinct hollow grains exhibit complex 3-D morphologies but in 2-D projections resemble typical organic hollow globules observed by transmission electron microscopy. The particle, with its outer region characterized by rough vesicular structures due to thermal alteration, has turned out to be an inherently fragile and intricately submicron- and nanoporous aggregate of the sub-μm grains or grain clumps that are delicately bound together frequently with little grain-to-grain contact in 3-D space.
Mohanty, Soumyaranjan; Sanger, Kuldeep; Heiskanen, Arto;
2016-01-01
fabricate dual-pore scaffolds for various tissue engineering applications where 3D printing of poly(vinyl alcohol) (PVA) mould is combined with salt leaching process. In this technique the sacrificial PVA mould, determining the structured pore architecture, was filled with salt crystals to define the random...... pore regions of the scaffold. After crosslinking the casted polymer the combined PVA-salt mould was dissolved in water. The technique has advantages over previously reported ones, such as automated assembly of the sacrificial mould, and precise control over pore architecture/dimensions by 3D printing...
Fast particles identification in programmable form at level-0 trigger by means of the 3D-Flow system
The 3D-Flow Processor system is a new, technology-independent concept in very fast, real-time system architectures. Based on either an FPGA or an ASIC implementation, it can address, in a fully programmable manner, applications where commercially available processors would fail because of throughput requirements. Possible applications include filtering-algorithms (pattern recognition) from the input of multiple sensors, as well as moving any input validated by these filtering-algorithms to a single output channel. Both operations can easily be implemented on a 3D-Flow system to achieve a real-time processing system with a very short lag time. This system can be built either with off-the-shelf FPGAs or, for higher data rates, with CMOS chips containing 4 to 16 processors each. The basic building block of the system, a 3D-Flow processor, has been successfully designed in VHDL code written in ''Generic HDL'' (mostly made of reusable blocks that are synthesizable in different technologies, or FPGAs), to produce a netlist for a four-processor ASIC featuring 0.35 micron CBA (Ceil Base Array) technology at 3.3 Volts, 884 mW power dissipation at 60 MHz and 63.75 mm sq. die size. The same VHDL code has been targeted to three FPGA manufacturers (Altera EPF10K250A, ORCA-Lucent Technologies 0R3T165 and Xilinx XCV1000). A complete set of software tools, the 3D-Flow System Manager, equally applicable to ASIC or FPGA implementations, has been produced to provide full system simulation, application development, real-time monitoring, and run-time fault recovery. Today's technology can accommodate 16 processors per chip in a medium size die, at a cost per processor of less than $5 based on the current silicon die/size technology cost
Bull, D. J.
2014-01-01
In this thesis, particle-toughened and untoughened, carbon fibre composite material systems with quasi-isotropic layups were investigated. This was to understand better the toughening behaviour leading to increased impact damage resistance and post-impact compression damage tolerance performance. To achieve this, mechanical testing and conventional ultrasonic C-scan methods were combined with damage assessments using several 3D X-ray computed tomography techniques. These consisted of lab base...
Yan, Bo; Lim, Cheolwoong; Zhu, Likun; Yin, Leilei
2014-01-01
Diffusion induces stresses in the electrode during charge and discharge processes of lithium ion batteries, which can cause deformation and even fracture, further result in the fade of capacity and duration. The 3D model coupling diffusion and induced stress is applied to the reconstructed LiCoO2 electrode particles determined by X-ray nanocomputed tomography technology, of which the nonuniform electrochemical intercalation reaction takes place on the surface. A code is developed to simulate ...
In the paper a successful automatisation of advanced air pollution dispersion modelling is presented. Air pollution dispersion modelling is an important part of dose projection procedures. At Krsko NPP modelling consists of 3D wind and turbulence field reconstruction and numerical Lagrangean particle model air pollution dispersion simulation. Input data collection and modelling calculations are done every half hour totally automatically. Results are automatically available for dose calculation system. (author)
Chen, Shaoxia; McMullan, Greg; Faruqi, Abdul R; Murshudov, Garib N; Short, Judith M; Scheres, Sjors H W; Henderson, Richard
2013-12-01
Three-dimensional (3D) structure determination by single particle electron cryomicroscopy (cryoEM) involves the calculation of an initial 3D model, followed by extensive iterative improvement of the orientation determination of the individual particle images and the resulting 3D map. Because there is much more noise than signal at high resolution in the images, this creates the possibility of noise reinforcement in the 3D map, which can give a false impression of the resolution attained. The balance between signal and noise in the final map at its limiting resolution depends on the image processing procedure and is not easily predicted. There is a growing awareness in the cryoEM community of how to avoid such over-fitting and over-estimation of resolution. Equally, there has been a reluctance to use the two principal methods of avoidance because they give lower resolution estimates, which some people believe are too pessimistic. Here we describe a simple test that is compatible with any image processing protocol. The test allows measurement of the amount of signal and the amount of noise from overfitting that is present in the final 3D map. We have applied the method to two different sets of cryoEM images of the enzyme beta-galactosidase using several image processing packages. Our procedure involves substituting the Fourier components of the initial particle image stack beyond a chosen resolution by either the Fourier components from an adjacent area of background, or by simple randomisation of the phases of the particle structure factors. This substituted noise thus has the same spectral power distribution as the original data. Comparison of the Fourier Shell Correlation (FSC) plots from the 3D map obtained using the experimental data with that from the same data with high-resolution noise (HR-noise) substituted allows an unambiguous measurement of the amount of overfitting and an accompanying resolution assessment. A simple formula can be used to calculate an
Streamer and leader formation in high pressure devices is dynamic process involving a broad range of physical phenomena. These include elastic and inelastic particle collisions in the gas, radiation generation, transport and absorption, and electrode interactions. Accurate modeling of these physical processes is essential for a number of applications, including high-current, laser-triggered gas switches. Towards this end, we present a new 3D implicit particle-in-cell simulation model of gas breakdown leading to streamer formation in electronegative gases. The model uses a Monte Carlo treatment for all particle interactions and includes discrete photon generation, transport, and absorption for ultra-violet and soft x-ray radiation. Central to the realization of this fully kinetic particle treatment is an algorithm that manages the total particle count by species while preserving the local momentum distribution functions and conserving charge [D. R. Welch, T. C. Genoni, R. E. Clark, and D. V. Rose, J. Comput. Phys. 227, 143 (2007)]. The simulation model is fully electromagnetic, making it capable of following, for example, the evolution of a gas switch from the point of laser-induced localized breakdown of the gas between electrodes through the successive stages of streamer propagation, initial electrode current connection, and high-current conduction channel evolution, where self-magnetic field effects are likely to be important. We describe the model details and underlying assumptions used and present sample results from 3D simulations of streamer formation and propagation in SF6.
Lee, Yunjeong; Lim, Yeongjin; Shin, Heungjoo
2016-06-01
Reproducible research results for nanofluidics and their applications require viable fabrication technologies to produce nanochannels integrated with microchannels that can guide fluid flow and analytes into/out of the nanochannels. We present the simple fabrication of mixed-scale polydimethylsiloxane (PDMS) channel networks consisting of nanochannels and microchannels via a single molding process using a monolithic mixed-scale carbon mold. The monolithic carbon mold is fabricated by pyrolyzing a polymer mold patterned by photolithography. During pyrolysis, the polymer mold shrinks by ~90%, which enables nanosized carbon molds to be produced without a complex nanofabrication process. Because of the good adhesion between the polymer mold and the Si substrate, non-uniform volume reduction occurs during pyrolysis resulting in the formation of curved carbon mold side walls. These curved side walls and the relatively low surface energy of the mold provide efficient demolding of the PDMS channel networks. In addition, the trigonal prismatic shape of the polymer is converted into to a Kingfisher-beak-shaped carbon structure due to the non-uniform volume reduction. The transformation of this mold architecture produces a PDMS Kingfisher-beak-shaped 3D microfunnel that connects the microchannel and the nanochannel smoothly. The smooth reduction in the cross-sectional area of the 3D microfunnels enables efficient single microparticle trapping at the nanochannel entrance; this is beneficial for studies of cell transfection.Reproducible research results for nanofluidics and their applications require viable fabrication technologies to produce nanochannels integrated with microchannels that can guide fluid flow and analytes into/out of the nanochannels. We present the simple fabrication of mixed-scale polydimethylsiloxane (PDMS) channel networks consisting of nanochannels and microchannels via a single molding process using a monolithic mixed-scale carbon mold. The monolithic
Chen, Shaoxia; McMullan, Greg; Faruqi, Abdul R.; Murshudov, Garib N.; Short, Judith M.; Scheres, Sjors H.W.; Henderson, Richard, E-mail: rh15@mrc-lmb.cam.ac.uk
2013-12-15
Three-dimensional (3D) structure determination by single particle electron cryomicroscopy (cryoEM) involves the calculation of an initial 3D model, followed by extensive iterative improvement of the orientation determination of the individual particle images and the resulting 3D map. Because there is much more noise than signal at high resolution in the images, this creates the possibility of noise reinforcement in the 3D map, which can give a false impression of the resolution attained. The balance between signal and noise in the final map at its limiting resolution depends on the image processing procedure and is not easily predicted. There is a growing awareness in the cryoEM community of how to avoid such over-fitting and over-estimation of resolution. Equally, there has been a reluctance to use the two principal methods of avoidance because they give lower resolution estimates, which some people believe are too pessimistic. Here we describe a simple test that is compatible with any image processing protocol. The test allows measurement of the amount of signal and the amount of noise from overfitting that is present in the final 3D map. We have applied the method to two different sets of cryoEM images of the enzyme beta-galactosidase using several image processing packages. Our procedure involves substituting the Fourier components of the initial particle image stack beyond a chosen resolution by either the Fourier components from an adjacent area of background, or by simple randomisation of the phases of the particle structure factors. This substituted noise thus has the same spectral power distribution as the original data. Comparison of the Fourier Shell Correlation (FSC) plots from the 3D map obtained using the experimental data with that from the same data with high-resolution noise (HR-noise) substituted allows an unambiguous measurement of the amount of overfitting and an accompanying resolution assessment. A simple formula can be used to calculate an
Three-dimensional (3D) structure determination by single particle electron cryomicroscopy (cryoEM) involves the calculation of an initial 3D model, followed by extensive iterative improvement of the orientation determination of the individual particle images and the resulting 3D map. Because there is much more noise than signal at high resolution in the images, this creates the possibility of noise reinforcement in the 3D map, which can give a false impression of the resolution attained. The balance between signal and noise in the final map at its limiting resolution depends on the image processing procedure and is not easily predicted. There is a growing awareness in the cryoEM community of how to avoid such over-fitting and over-estimation of resolution. Equally, there has been a reluctance to use the two principal methods of avoidance because they give lower resolution estimates, which some people believe are too pessimistic. Here we describe a simple test that is compatible with any image processing protocol. The test allows measurement of the amount of signal and the amount of noise from overfitting that is present in the final 3D map. We have applied the method to two different sets of cryoEM images of the enzyme beta-galactosidase using several image processing packages. Our procedure involves substituting the Fourier components of the initial particle image stack beyond a chosen resolution by either the Fourier components from an adjacent area of background, or by simple randomisation of the phases of the particle structure factors. This substituted noise thus has the same spectral power distribution as the original data. Comparison of the Fourier Shell Correlation (FSC) plots from the 3D map obtained using the experimental data with that from the same data with high-resolution noise (HR-noise) substituted allows an unambiguous measurement of the amount of overfitting and an accompanying resolution assessment. A simple formula can be used to calculate an
武晓峰; 陈运法; 魏连启; 王奇
2006-01-01
PS/SiO2 particles with core-shell structure were synthesized by coating silica on surface of polystyrene (PS)colloidal particles. The reaction parameters, such as initial tetraethyl orthosilicate (TEOS) concentration, water concentration and reaction temperature, have been investigated to control the thickness of silica shells. The shell thickness was prepositional to the square root of the initial concentration of TEOS and first increased with increasing water concentration, reached a maximum at about 2.0 mol/L and then started decreasing beyond that concentration. It was also found that the shell thickness decreased firstly with the reaction temperature added, then tended to a constant. The so-synthesized PS/SiO2 core-shell particles were directly crystallized into 3-D ordered thin film, then sintered at 570 ℃ into the ordered macroporous thin film.Compared with the conditional method, the present approach avoids repeatedly filling the precursor in the templetes and save time more.
Several years of optimization on the super-scalar architecture has made it more difficult to port the current version of the 3D particle-in-cell code GTC to the CRAY/NEC SX-6 vector architecture. This paper explains the initial work that has been done to port this code to the SX-6 computer and to optimize the most time consuming parts. Early performance results are shown and compared to the same test done on the IBM SP Power 3 and Power 4 machines
3d and r,z particle simulation of beams for heavy ion fusion: The WARP code
WARP is an electrostatic particle-in-cell (PIC) code that is optimized for studies of space-charge-dominated beams. The authors use the code to understand a number of issues in HIF accelerators and transport systems, including: drift-compression in the presence of misalignments, axial confinement, longitudinal stability, transport around bends, and thermal equilibration processes. In this paper they describe the code architecture and numerical techniques employed to enhance efficiency. They then describe the new simple algorithm for following a beam around a bend, and recent results on bent-beam dynamics and transverse emittance evolution. Finally, they describe the code's most recent feature, a general-lattice capability structured to preserve the efficiency of the particle advance, and present initial results using it
Highlights: • Development of MPS eutectic model for solid–solid interaction. • Analysis of experiments dealing with eutectic behavior of Pb–Sn by MPS simulation. • The analysis has revealed the mechanism of eutectic melting due to eutectic reaction. - Abstract: The eutectic reaction phenomenon was analyzed based on the Moving Particle Semi-implicit (MPS) method. The improved MPS code was applied to three-dimensional Pb–Sn system experiments conducted at Central Research Institute of Electric Power Industry (CRIEPI). The experiments dealt with solid–solid contact materials at 225 and 205 °C. The mass diffusion process was modeled based on Fick’s second law. The criterion of eutectic reaction was modeled based on binary phase diagram. The calculated penetration rates, i.e. height reduction rates, were compared with the experimental measurements. The results obtained by the MPS simulations exhibit good agreement with the experiments carried out at 205 and 225 °C. MPS simulation predicted that Sn particle will liquefy earlier than Pb particle
Rodríguez-Sevilla, Paloma; Labrador-Páez, Lucía; Wawrzyńczyk, Dominika; Nyk, Marcin; Samoć, Marek; Kar, Ajoy Kumar; MacKenzie, Mark D.; Paterson, Lynn; Jaque, Daniel; Haro-González, Patricia
2015-12-01
An approach to unequivocally determine the three-dimensional orientation of optically manipulated NaYF4:Er3+,Yb3+ upconverting nanorods (UCNRs) is demonstrated. Long-term immobilization of individual UCNRs inside single and multiple resonant optical traps allow for stable single UCNR spectroscopy studies. Based on the strong polarization dependent upconverted luminescence of UCNRs it is possible to unequivocally determine, in real time, their three-dimensional orientation when optically trapped. In single-beam traps, polarized single particle spectroscopy has concluded that UCNRs orientate parallel to the propagation axis of the trapping beam. On the other hand, when multiple-beam optical tweezers are used, single particle polarization spectroscopy demonstrated how full spatial control over UCNR orientation can be achieved by changing the trap-to-trap distance as well as the relative orientation between optical traps. All these results show the possibility of real time three-dimensional manipulation and tracking of anisotropic nanoparticles with wide potential application in modern nanobiophotonics.An approach to unequivocally determine the three-dimensional orientation of optically manipulated NaYF4:Er3+,Yb3+ upconverting nanorods (UCNRs) is demonstrated. Long-term immobilization of individual UCNRs inside single and multiple resonant optical traps allow for stable single UCNR spectroscopy studies. Based on the strong polarization dependent upconverted luminescence of UCNRs it is possible to unequivocally determine, in real time, their three-dimensional orientation when optically trapped. In single-beam traps, polarized single particle spectroscopy has concluded that UCNRs orientate parallel to the propagation axis of the trapping beam. On the other hand, when multiple-beam optical tweezers are used, single particle polarization spectroscopy demonstrated how full spatial control over UCNR orientation can be achieved by changing the trap-to-trap distance as well as
Proper interpretation of space based critical velocity ionization experiments depends upon understanding the expected results from in-situ or remote sensors. A three-dimensional electromagnetic Particle-in-Cell code with Monte Carlo charged particle-neutral collisions has been developed to model CIV interactions in typical neutral gas release experiments. In the model, the released neutral gas is taken to be a spherical cloud traveling with a constant density and velocity rvec υn across the geomagnetic field rvec B0. Then dynamics of the plasma ionized from the neutral cloud are studied, and the induced instabilities are discussed. The simulations show that the newly ionized plasma evolves to form an ''asymmetric sphere-sheet tail'' structure: the ions mainly drift with the neutral cloud and expand in the rvec υ x rvec B0 direction; the electrons are trapped by the magnetic field and form a curved ''sheet-like'' tail which spreads along the rvec B0 direction. The ionization rate determines the structure shape. Significant ion density enhancement occurs only in the core region of the neutral gas cloud. It is shown that the detection of CIV in an ionospheric gas release experiment critically depends on the sensor location
Taccogna, F.; Minelli, P.; Cavenago, M.; Veltri, P.; Ippolito, N.
2016-02-01
The geometry of a single aperture in the extraction grid plays a relevant role for the optimization of negative ion transport and extraction probability in a hybrid negative ion source. For this reason, a three-dimensional particle-in-cell/Monte Carlo collision model of the extraction region around the single aperture including part of the source and part of the acceleration (up to the extraction grid (EG) middle) regions has been developed for the new aperture design prepared for negative ion optimization 1 source. Results have shown that the dimension of the flat and chamfered parts and the slope of the latter in front of the source region maximize the product of production rate and extraction probability (allowing the best EG field penetration) of surface-produced negative ions. The negative ion density in the plane yz has been reported.
Marcus, Guy; Parsa, Shima; Kramel, Stefan; Ni, Rui; Voth, Greg
2013-11-01
We have developed a general methodology to experimentally measure the time-resolved Lagrangian orientation and solid body rotation rate of anisotropic particles with arbitrary aspect ratio from standard stereoscopic video image data. We apply these techniques to particles advected in a Rλ ~ 110 fluid flow, where turbulence is generated by two grids oscillating in phase. We use 3D printing technology to design and fabricate neutrally buoyant rods, crosses (two perpendicular rods), and jacks (three mutually perpendicular rods) with a largest dimension of 7 times the Kolmogorov length scale, which makes them good approximations to tracer particles. We have measured the mean square rotation rate, ṗiṗi , of particles spanning the full range of aspect ratios and obtained results that agree with direct numerical simulations. By measuring the full solid-body rotation of jacks, we provide a new, extensible way to directly probe the Lagrangian vorticity of a fluid. We also present direct measurements of the alignment of crosses with the direction of their solid body rotation rate vector--in agreement with direct numerical simulations. Supported by NSF grant DMR1208990.
Han, Daoru; Wang, Pu; He, Xiaoming; Lin, Tao; Wang, Joseph
2016-09-01
Motivated by the need to handle complex boundary conditions efficiently and accurately in particle-in-cell (PIC) simulations, this paper presents a three-dimensional (3D) linear immersed finite element (IFE) method with non-homogeneous flux jump conditions for solving electrostatic field involving complex boundary conditions using structured meshes independent of the interface. This method treats an object boundary as part of the simulation domain and solves the electric field at the boundary as an interface problem. In order to resolve charging on a dielectric surface, a new 3D linear IFE basis function is designed for each interface element to capture the electric field jump on the interface. Numerical experiments are provided to demonstrate the optimal convergence rates in L2 and H1 norms of the IFE solution. This new IFE method is integrated into a PIC method for simulations involving charging of a complex dielectric surface in a plasma. A numerical study of plasma-surface interactions at the lunar terminator is presented to demonstrate the applicability of the new method.
High-Fidelity RF Gun Simulations with the Parallel 3D Finite Element Particle-In-Cell Code Pic3P
Candel, A; Kabel, A.; Lee, L.; Li, Z.; Limborg, C.; Ng, C.; Schussman, G.; Ko, K.; /SLAC
2009-06-19
SLAC's Advanced Computations Department (ACD) has developed the first parallel Finite Element 3D Particle-In-Cell (PIC) code, Pic3P, for simulations of RF guns and other space-charge dominated beam-cavity interactions. Pic3P solves the complete set of Maxwell-Lorentz equations and thus includes space charge, retardation and wakefield effects from first principles. Pic3P uses higher-order Finite Elementmethods on unstructured conformal meshes. A novel scheme for causal adaptive refinement and dynamic load balancing enable unprecedented simulation accuracy, aiding the design and operation of the next generation of accelerator facilities. Application to the Linac Coherent Light Source (LCLS) RF gun is presented.
In the paper we present Large-eddy simulation (LES) results of 3D Taylor- Green vortex obtained by the three different computational approaches: Smoothed Particle Hydrodynamics (SPH), Lattice Boltzmann Method (LBM) and Finite Volume Method (FVM). The Smagorinsky model was chosen as a subgrid-scale closure in LES for all considered methods and a selection of spatial resolutions have been investigated. The SPH and LBM computations have been carried out with the use of the in-house codes executed on GPU and compared, for validation purposes, with the FVM results obtained using the open-source CFD software OpenFOAM. A comparative study in terms of one-point statistics and turbulent energy spectra shows a good agreement of LES results for all methods. An analysis of the GPU code efficiency and implementation difficulties has been made. It is shown that both SPH and LBM may offer a significant advantage over mesh-based CFD methods.
Particle System Based Unity3D Game Effects%基于Unity3D粒子系统的游戏特效实现
谢韬
2015-01-01
近年来，人们对电子游戏的娱乐性需求越来越高，追求更加真实的效果也成为电子游戏发展的大方向，无论是手游还是PC游戏都广泛用到粒子系统来实现游戏特效和场景模拟。从分析粒子系统的基础上，通过使用Unity3D引擎上的粒子系统，由理论到实际代码的编写来实现游戏中子弹击中物体后的爆炸效果。%In recent years, people demand entertainment video games become more sophisticated, the pursuit of a more realistic effect has become the general direction of development of video games, both the mobile games and PC games are widely used in the particle system to achieve gaming effects. Based on the analysis from the particle system, by using a particle system on Unity3D engine, from theory to write the actual code of the game to achieve the explosion of the bullet bomb.
利用三维重建进行粒子统计的方法%Statistic Means of Particle Using 3D Reconstruction
原飞; 肖德成; 任新宇; 刘畅; 王宗祺; 范勇
2013-01-01
Aiming at the difficulty of calculating the volume and count of the adhesion particle based single 2D-image, a space statistical algorithm based on reconstruction was presented in this paper. Firstly, taking the erosion based on mathematical morphology of the CT slice images, the images of the separated adhesive particles were obtained. Secondly, 3D reconstruction of the slice images was taken by using the Marching Cubes algorithm. Then, these reconstructed particles were saved with the STL data format. Finally , the statistic was completed according to the features of STL data format and the connectivity of particles. The experimental results show that this algorithm can accurately count the number and estimate the volume of the spherical particles within 20% random noise.%针对单张二维图片难以准确完成粘连粒子计数与体积计算的问题,提出了一种基于重建的空间统计算法.首先对CT切片图像采用数学形态中的腐蚀处理,得到粘连粒子分离图像,然后采用Marching Cubes算法对切片图像进行三维重建,再将重建的粒子以STL数据格式保存,最后根据STL数据的特征和粒子的连通性完成统计.实验结果表明,当球形粒子随机噪声分布概率在20％以内时该方法能够准确完成粘连粒子计数和粒子体积估算.
VOLTAGE REGULATORS ASYNCHRONOUS GENERATORS
Grigorash O. V.; Bogatyrev N. I.; Hitskova A. O.
2015-01-01
A promising is currently the use of asynchronous generators with capacitive excitation as a source of electricity in stand-alone power systems. Drive asynchronous generators may exercise as a thermal engine and wind wheel wind power plant or turbines of small hydropower plants. The article discusses the structural and schematics of voltage stabilizers and frequency of asynchronous generators with improved operational and technical specifications. Technical novelty of design solutions of the m...
Lucas, Laurent; Loscos, Céline
2013-01-01
While 3D vision has existed for many years, the use of 3D cameras and video-based modeling by the film industry has induced an explosion of interest for 3D acquisition technology, 3D content and 3D displays. As such, 3D video has become one of the new technology trends of this century.The chapters in this book cover a large spectrum of areas connected to 3D video, which are presented both theoretically and technologically, while taking into account both physiological and perceptual aspects. Stepping away from traditional 3D vision, the authors, all currently involved in these areas, provide th
Beane, Andy
2012-01-01
The essential fundamentals of 3D animation for aspiring 3D artists 3D is everywhere--video games, movie and television special effects, mobile devices, etc. Many aspiring artists and animators have grown up with 3D and computers, and naturally gravitate to this field as their area of interest. Bringing a blend of studio and classroom experience to offer you thorough coverage of the 3D animation industry, this must-have book shows you what it takes to create compelling and realistic 3D imagery. Serves as the first step to understanding the language of 3D and computer graphics (CG)Covers 3D anim
Martelloni, Gianluca; Bagnoli, Franco; Di Cintio, Pierfrancesco
2015-04-01
We integrate existing soil infiltration modeling with particle based methods in order to simulate two and three-dimensional setups of triggered landslides. Commonly, the infiltration models are based on continuum schemes (e.g. Eulerian approach) by means of which it is possible to define the field of the pore pressure within a soil. By contrast, the particle based methods follow a Lagrangian scheme that allows one to identify the particle trajectories and their dynamical properties. In this work, in order to simulate the triggering mechanism, we apply the classical, fractal and fractional Richards equations and the Mohr-Coulomb failure criterion, adapted to the molecular dynamics technique. In our scheme the (local) positive pore pressure is simply implemented as a perturbation of the rest state of each grain. Therefore, the pore pressure function can be interpreted as a time-space dependent scalar field acting on each particle. To initialize the system we generate, using a molecular dynamics based algorithm, a mechanically stable disk (2D) or sphere (3D) packing simulating the consolidated soil. In this way, we can built the micro and macro pore structure related to different infiltration time scales. The inter-particle interactions are modeled with a Lennard-Jones like potential. The particle positions are updated in time, after and during a rainfall, with standard molecular dynamics. We analyze the sensitivity of the model with respect to the variation of some parameters such as hydraulic conductivity, cohesion, slope and friction angle, soil depth and fractional order of the generalized infiltration model. In addition, we consider both regular and random particle configurations. The results of our simulations are found to be in agreement with real landslides. In particular, the mean velocity patterns of the simulated landslides appear extremely similar to the observed ones. Moreover, it is possible to apply the method of the inverse surface displacement
Compositional asynchronous membrane systems
Cosmin Bonchis; Cornel Izbasa; Gabriel Ciobanu
2007-01-01
This paper presents an algorithmic way of building complex membrane systems by coupling elementary membranes. Its application seems particularly valuable in the case of asynchronous membrane systems, since the resulting membrane system remains asynchronous. The composition method is based on a handshake mechanism implemented by using antiport rules and promoters.
PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITHOUT TURB3D)
Buning, P.
1994-01-01
PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into
PLOT3D/AMES, APOLLO UNIX VERSION USING GMR3D (WITH TURB3D)
Buning, P.
1994-01-01
PLOT3D is an interactive graphics program designed to help scientists visualize computational fluid dynamics (CFD) grids and solutions. Today, supercomputers and CFD algorithms can provide scientists with simulations of such highly complex phenomena that obtaining an understanding of the simulations has become a major problem. Tools which help the scientist visualize the simulations can be of tremendous aid. PLOT3D/AMES offers more functions and features, and has been adapted for more types of computers than any other CFD graphics program. Version 3.6b+ is supported for five computers and graphic libraries. Using PLOT3D, CFD physicists can view their computational models from any angle, observing the physics of problems and the quality of solutions. As an aid in designing aircraft, for example, PLOT3D's interactive computer graphics can show vortices, temperature, reverse flow, pressure, and dozens of other characteristics of air flow during flight. As critical areas become obvious, they can easily be studied more closely using a finer grid. PLOT3D is part of a computational fluid dynamics software cycle. First, a program such as 3DGRAPE (ARC-12620) helps the scientist generate computational grids to model an object and its surrounding space. Once the grids have been designed and parameters such as the angle of attack, Mach number, and Reynolds number have been specified, a "flow-solver" program such as INS3D (ARC-11794 or COS-10019) solves the system of equations governing fluid flow, usually on a supercomputer. Grids sometimes have as many as two million points, and the "flow-solver" produces a solution file which contains density, x- y- and z-momentum, and stagnation energy for each grid point. With such a solution file and a grid file containing up to 50 grids as input, PLOT3D can calculate and graphically display any one of 74 functions, including shock waves, surface pressure, velocity vectors, and particle traces. PLOT3D's 74 functions are organized into
D. Pletinckx
2012-09-01
Full Text Available The current 3D hype creates a lot of interest in 3D. People go to 3D movies, but are we ready to use 3D in our homes, in our offices, in our communication? Are we ready to deliver real 3D to a general public and use interactive 3D in a meaningful way to enjoy, learn, communicate? The CARARE project is realising this for the moment in the domain of monuments and archaeology, so that real 3D of archaeological sites and European monuments will be available to the general public by 2012. There are several aspects to this endeavour. First of all is the technical aspect of flawlessly delivering 3D content over all platforms and operating systems, without installing software. We have currently a working solution in PDF, but HTML5 will probably be the future. Secondly, there is still little knowledge on how to create 3D learning objects, 3D tourist information or 3D scholarly communication. We are still in a prototype phase when it comes to integrate 3D objects in physical or virtual museums. Nevertheless, Europeana has a tremendous potential as a multi-facetted virtual museum. Finally, 3D has a large potential to act as a hub of information, linking to related 2D imagery, texts, video, sound. We describe how to create such rich, explorable 3D objects that can be used intuitively by the generic Europeana user and what metadata is needed to support the semantic linking.
The LHC-B collaboration is in the process of designing a forward spectrometer, optimized for the detection of Beauty particles, to run at the LHC collider. One very crucial aspect of the design is the global multi-level trigger scheme, required to reduce the event rate from around 40 MHz (the LHC beam crossing rate) down to the foreseen recording rate of a few KHz. At Level-1, it is currently envisaged to implement high pt electron, muon and hadron triggers.The requirements for Level 1 are to accept, with zero deadtime, events at the 40 MHz rate, and to provide an answer within a couple of microseconds. The rejection rate for minimum bias events expected of Level 1 is of the order of one hundred. The 3D-Flow system can implement the above requirements in real time with zero dead-time giving the user the flexibility to change at later time the algorithm, including more signals in the decision process, and to upgrade incrementally the system with changes in granularity and/or segmentation
This book explains modeling of solid works 3D and application of 3D CAD/CAM. The contents of this book are outline of modeling such as CAD and 2D and 3D, solid works composition, method of sketch, writing measurement fixing, selecting projection, choosing condition of restriction, practice of sketch, making parts, reforming parts, modeling 3D, revising 3D modeling, using pattern function, modeling necessaries, assembling, floor plan, 3D modeling method, practice floor plans for industrial engineer data aided manufacturing, processing of CAD/CAM interface.
Zhang, Y.; Jacob, D. J.; Dutkiewicz, S.; Amos, H. M.; Long, M. S.; Sunderland, E. M.
2014-12-01
Rivers are estimated to deliver 27 Mmol a-1 of mercury (Hg) to ocean margins, which is comparable to the global atmospheric deposition flux of Hg to the ocean. Previous studies presumed that most of this riverine Hg is sequestered by settling to the coastal regions. However, there has been little investigation of the mechanism and efficiency with which this sequestration takes place, and the implications for riverine influence in different ocean regions. Here we develop a global 3-D chemical transport model for Hg in the ocean (MITgcm-Hg) with ecology (DARWIN model). We track offshore export of the discharged Hg from heterogeneous river systems over different ocean regions, and how it is influenced by the interaction of Hg in a variety of geochemical forms with carbon and suspended particles. We constrain our model assumptions with available offshore observations that bear strong riverine signals. Modeling results suggest that some of the riverine Hg is highly refractory, sorbs strongly to particles and does not follow equilibrium partitioning with the dissolved phase. Simulated global Hg evasion from riverine sources is 50 times larger without this refractory particulate pool, which results in a total evasion flux two times larger than our current best estimate. Based on a typology system of global rivers, we calculate that 10% to 60% of the particulate Hg from different rivers settles in ocean margin sediments because of subgrid sedimentation processes. The remaining 7.5 Mmol a-1 (28% of total river discharge) is available for offshore transport, where it undergoes further sedimentation to the shelf (5.3 Mmol a-1) as well as evasion to the atmosphere (0.44 Mmol a-1). Only 1.7 Mmol a-1 (6.4% of the global riverine Hg) reaches the open ocean, although that fraction varies from 2.6% in East Asia because of the blockage of Korean Peninsula to 25% in east North America facilitated by the Gulf Stream. We find large riverine influences over coastal oceans off East Asia
3d-3d correspondence revisited
Chung, Hee-Joong; Dimofte, Tudor; Gukov, Sergei; Sułkowski, Piotr
2016-04-01
In fivebrane compactifications on 3-manifolds, we point out the importance of all flat connections in the proper definition of the effective 3d {N}=2 theory. The Lagrangians of some theories with the desired properties can be constructed with the help of homological knot invariants that categorify colored Jones polynomials. Higgsing the full 3d theories constructed this way recovers theories found previously by Dimofte-Gaiotto-Gukov. We also consider the cutting and gluing of 3-manifolds along smooth boundaries and the role played by all flat connections in this operation.
Brdnik, Lovro
2015-01-01
Diplomsko delo analizira trenutno stanje 3D tiskalnikov na trgu. Prikazan je razvoj in principi delovanja 3D tiskalnikov. Predstavljeni so tipi 3D tiskalnikov, njihove prednosti in slabosti. Podrobneje je predstavljena zgradba in delovanje koračnih motorjev. Opravljene so meritve koračnih motorjev. Opisana je programska oprema za rokovanje s 3D tiskalniki in komponente, ki jih potrebujemo za izdelavo. Diploma se oklepa vprašanja, ali je izdelava 3D tiskalnika bolj ekonomična kot pa naložba v ...
Meulien Ohlmann, Odile
2013-02-01
Today the industry offers a chain of 3D products. Learning to "read" and to "create in 3D" becomes an issue of education of primary importance. 25 years professional experience in France, the United States and Germany, Odile Meulien set up a personal method of initiation to 3D creation that entails the spatial/temporal experience of the holographic visual. She will present some different tools and techniques used for this learning, their advantages and disadvantages, programs and issues of educational policies, constraints and expectations related to the development of new techniques for 3D imaging. Although the creation of display holograms is very much reduced compared to the creation of the 90ies, the holographic concept is spreading in all scientific, social, and artistic activities of our present time. She will also raise many questions: What means 3D? Is it communication? Is it perception? How the seeing and none seeing is interferes? What else has to be taken in consideration to communicate in 3D? How to handle the non visible relations of moving objects with subjects? Does this transform our model of exchange with others? What kind of interaction this has with our everyday life? Then come more practical questions: How to learn creating 3D visualization, to learn 3D grammar, 3D language, 3D thinking? What for? At what level? In which matter? for whom?
Marcos Rogério Szeliga; Woodrow Nelson Lopes Roma
2009-01-01
Particle Image Velocimetry (PIV) é uma técnica recente de medição não-intrusiva de campos de velocidades em escoamentos. Neste trabalho, foi desenvolvido um equipamento de medição com características similares aos convencionais, porém com algumas características exclusivas, como o método óptico de aquisição de imagens e a calibração de coordenadas, que resultaram na utilização de uma única câmera convencional para obtenção de imagens e dados tridimensionais em escoamentos de baixa turbulência...
Marcos Rogério Szeliga
2009-12-01
Full Text Available Particle Image Velocimetry (PIV é uma técnica recente de medição não-intrusiva de campos de velocidades em escoamentos. Neste trabalho, foi desenvolvido um equipamento de medição com características similares aos convencionais, porém com algumas características exclusivas, como o método óptico de aquisição de imagens e a calibração de coordenadas, que resultaram na utilização de uma única câmera convencional para obtenção de imagens e dados tridimensionais em escoamentos de baixa turbulência, proporcionando significativa economia na implantação. Foi desenvolvido um software específico e os resultados consistem em campos de velocidades tridimensionais. A aplicação destinou-se à medição de velocidades na superfície do escoamento em um tanque de grades oscilantes de forma a correlacionar a turbulência superficial com a capacidade de reaeração dos corpos da água.Particle Image Velocimetry (PIV is a recent technique of flow measurement labeled as a non-intrusive methodology. The system developed in this paper used principles similar to conventional systems including some exclusive characteristics as the optical method of image acquisition and the calibration process of the coordinate system. The measurement system, resulted from these characteristics, uses a single conventional digital video camera to obtain three-dimensional data in low turbulence flow, which provided significant economy in the system implantation. A specific software was developed and the results consist of fields of three-dimensional velocities obtained from the digital video file. The application was destined to the measurement of velocities on the flow surface in a tank of oscillating grids in order to correlate the surface turbulence with the rearation capacity of the bodies of water.
VOLTAGE REGULATORS ASYNCHRONOUS GENERATORS
Grigorash O. V.
2015-06-01
Full Text Available A promising is currently the use of asynchronous generators with capacitive excitation as a source of electricity in stand-alone power systems. Drive asynchronous generators may exercise as a thermal engine and wind wheel wind power plant or turbines of small hydropower plants. The article discusses the structural and schematics of voltage stabilizers and frequency of asynchronous generators with improved operational and technical specifications. Technical novelty of design solutions of the magnetic system and stabilizers asynchronous generator of electricity parameters confirmed by the patents for the invention of the Russian Federation. The proposed technical solution voltage stabilizer asynchronous generators, can reduce the weight of the block capacitors excitation and reactive power compensation, as well as to simplify the control system power circuit which has less power electronic devices. For wind power plants it is an important issue not only to stabilize the voltage of the generator, but also the frequency of the current. Recommend functionality stabilizer schemes parameters of electric power made for direct frequency converters with artificial and natural switching power electronic devices. It is also proposed as part of stabilization systems use single-phase voltage, three-phase transformers with rotating magnetic field, reduce the level of electromagnetic interference generated by power electronic devices for switching, enhance the efficiency and reliability of the stabilizer.
Tournay, Bruno; Rüdiger, Bjarne
2006-01-01
3d digital model af Arkitektskolens gård med virtuel udstilling af afgangsprojekter fra afgangen sommer 2006. 10 s.......3d digital model af Arkitektskolens gård med virtuel udstilling af afgangsprojekter fra afgangen sommer 2006. 10 s....
Roberto Rinaldi
2014-12-01
Full Text Available After an experimental phase of many years, 3D filming is now effective and successful. Improvements are still possible, but the film industry achieved memorable success on 3D movie’s box offices due to the overall quality of its products. Special environments such as space (“Gravity” and the underwater realm look perfect to be reproduced in 3D. “Filming in space” was possible in “Gravity” using special effects and computer graphic. The underwater realm is still difficult to be handled. Underwater filming in 3D was not that easy and effective as filming in 2D, since not long ago. After almost 3 years of research, a French, Austrian and Italian team realized a perfect tool to film underwater, in 3D, without any constrains. This allows filmmakers to bring the audience deep inside an environment where they most probably will never have the chance to be.
Asynchronous Variational Contact Mechanics
Vouga, Etienne; Tamstorf, Rasmus; Grinspun, Eitan
2010-01-01
An asynchronous, variational method for simulating elastica in complex contact and impact scenarios is developed. Asynchronous Variational Integrators (AVIs) are extended to handle contact forces by associating different time steps to forces instead of to spatial elements. By discretizing a barrier potential by an infinite sum of nested quadratic potentials, these extended AVIs are used to resolve contact while obeying momentum- and energy-conservation laws. A series of two- and three-dimensional examples illustrate the robustness and good energy behavior of the method.
Asynchronized synchronous machines
Botvinnik, M M
1964-01-01
Asynchronized Synchronous Machines focuses on the theoretical research on asynchronized synchronous (AS) machines, which are "hybrids of synchronous and induction machines that can operate with slip. Topics covered in this book include the initial equations; vector diagram of an AS machine; regulation in cases of deviation from the law of full compensation; parameters of the excitation system; and schematic diagram of an excitation regulator. The possible applications of AS machines and its calculations in certain cases are also discussed. This publication is beneficial for students and indiv
Zhuang, Guisheng; Jensen, Thomas G.; Kutter, Jörg P.
2012-01-01
are fabricated in one SU‐8 layer by standard photolithography. The channels for out‐of‐plane focusing are made in a polydimethylsiloxane (PDMS) layer by a single cast using a SU‐8 master. Numerical and experimental results indicate that the device can realize 3D hydrodynamic focusing reliably over a...
Valenza, Enrico
2015-01-01
This book is aimed at the professionals that already have good 3D CGI experience with commercial packages and have now decided to try the open source Blender and want to experiment with something more complex than the average tutorials on the web. However, it's also aimed at the intermediate Blender users who simply want to go some steps further.It's taken for granted that you already know how to move inside the Blender interface, that you already have 3D modeling knowledge, and also that of basic 3D modeling and rendering concepts, for example, edge-loops, n-gons, or samples. In any case, it'
Panicker, Rajesh; Puthusserypady, Sadasivan; Sun, Ying
2010-01-01
An asynchronous hybrid brain-computer interface (BCI) system combining the P300 and steady-state visually evoked potentials (SSVEP) paradigms is introduced. A P300 base system is used for information transfer, and is augmented to include SSVEP for control state detection. The proposed system has...
Redundant Asynchronous Microprocessor System
Meyer, G.; Johnston, J. O.; Dunn, W. R.
1985-01-01
Fault-tolerant computer structure called RAMPS (for redundant asynchronous microprocessor system) has simplicity of static redundancy but offers intermittent-fault handling ability of complex, dynamically redundant systems. New structure useful wherever several microprocessors are employed for control - in aircraft, industrial processes, robotics, and automatic machining, for example.
Hundebøl, Jesper
wave of new building information modelling tools demands further investigation, not least because of industry representatives' somewhat coarse parlance: Now the word is spreading -3D digital modelling is nothing less than a revolution, a shift of paradigm, a new alphabet... Research qeustions. Based...... on empirical probes (interviews, observations, written inscriptions) within the Danish construction industry this paper explores the organizational and managerial dynamics of 3D Digital Modelling. The paper intends to - Illustrate how the network of (non-)human actors engaged in the promotion (and arrest) of 3......D Modelling (in Denmark) stabilizes - Examine how 3D Modelling manifests itself in the early design phases of a construction project with a view to discuss the effects hereof for i.a. the management of the building process. Structure. The paper introduces a few, basic methodological concepts...
Lively, Michael
2010-01-01
Professional Papervision3D describes how Papervision3D works and how real world applications are built, with a clear look at essential topics such as building websites and games, creating virtual tours, and Adobe's Flash 10. Readers learn important techniques through hands-on applications, and build on those skills as the book progresses. The companion website contains all code examples, video step-by-step explanations, and a collada repository.
Jaworski Jacek
2015-12-01
Full Text Available In recent years the 3D printing methods have been developing rapidly. This article presents researches about a new composite consisted of golden and magnetite nanoparticles which could be used for this technique. Preparation of golden nanoparticles by laser ablation and their soldering by laser green light irradiation proceeded in water environment. Magnetite was obtained on chemical way. During experiments it was tested a change of a size of nanoparticles during laser irradiation, surface plasmon resonance, zeta potential. The obtained golden - magnetite composite material was magnetic after laser irradiation. On the end there was considered the application it for 3D printing devices, water filters and four-valued non-volatile memories.
3D Reconstruction Technique for Tomographic PIV
姜楠; 包全; 杨绍琼
2015-01-01
Tomographic particle image velocimetry(Tomo-PIV) is a state-of-the-art experimental technique based on a method of optical tomography to achieve the three-dimensional(3D) reconstruction for three-dimensional three-component(3D-3C) flow velocity measurements. 3D reconstruction for Tomo-PIV is carried out herein. Meanwhile, a 3D simplified tomographic reconstruction model reduced from a 3D volume light inten-sity field with 2D projection images into a 2D Tomo-slice plane with 1D projecting lines, i.e., simplifying this 3D reconstruction into a problem of 2D Tomo-slice plane reconstruction, is applied thereafter. Two kinds of the most well-known algebraic reconstruction techniques, algebraic reconstruction technique(ART) and multiple algebraic reconstruction technique(MART), are compared as well. The principles of the two reconstruction algorithms are discussed in detail, which has been performed by a series of simulation images, yielding the corresponding recon-struction images that show different features between the ART and MART algorithm, and then their advantages and disadvantages are discussed. Further discussions are made for the standard particle image reconstruction when the background noise of the pre-initial particle image has been removed. Results show that the particle image recon-struction has been greatly improved. The MART algorithm is much better than the ART. Furthermore, the computa-tional analyses of two parameters(the particle density and the number of cameras), are performed to study their effects on the reconstruction. Lastly, the 3D volume particle field is reconstructed by using the improved algorithm based on the simplified 3D tomographic reconstruction model, which proves that the algorithm simplification is feasible and it can be applied to the reconstruction of 3D volume particle field in a Tomo-PIV system.
Singh, Sudhanshu S.; Williams, Jason J.; Stannard, Tyler J.; Xiao, Xianghui; De Carlo, Francesco; Chawla, Nikhilesh
2016-03-01
In situ X-ray synchrotron tomography was used to measure the localized corrosion rate of Mg2Si particles present in 7075 aluminum alloys in deionized ultra-filtered (DIUF) water. The evolution of hydrogen bubbles was captured as a function of time and the measured volume was used to calculate the local corrosion rate of Mg2Si particles. It was shown that in the absence of chloride ions, stress was needed to create fresh particle surfaces, either by fracture or debonding, to initiate corrosion at the particles.
3D Spectroscopic Instrumentation
Bershady, Matthew A
2009-01-01
In this Chapter we review the challenges of, and opportunities for, 3D spectroscopy, and how these have lead to new and different approaches to sampling astronomical information. We describe and categorize existing instruments on 4m and 10m telescopes. Our primary focus is on grating-dispersed spectrographs. We discuss how to optimize dispersive elements, such as VPH gratings, to achieve adequate spectral resolution, high throughput, and efficient data packing to maximize spatial sampling for 3D spectroscopy. We review and compare the various coupling methods that make these spectrographs ``3D,'' including fibers, lenslets, slicers, and filtered multi-slits. We also describe Fabry-Perot and spatial-heterodyne interferometers, pointing out their advantages as field-widened systems relative to conventional, grating-dispersed spectrographs. We explore the parameter space all these instruments sample, highlighting regimes open for exploitation. Present instruments provide a foil for future development. We give an...
Halskov, Kim; Johansen, Stine Liv; Bach Mikkelsen, Michelle
2014-01-01
Three-dimensional projection installations are particular kinds of augmented spaces in which a digital 3-D model is projected onto a physical three-dimensional object, thereby fusing the digital content and the physical object. Based on interaction design research and media studies, this article...... contributes to the understanding of the distinctive characteristics of such a new medium, and identifies three strategies for designing 3-D projection installations: establishing space; interplay between the digital and the physical; and transformation of materiality. The principal empirical case, From...... Fingerplan to Loop City, is a 3-D projection installation presenting the history and future of city planning for the Copenhagen area in Denmark. The installation was presented as part of the 12th Architecture Biennale in Venice in 2010....
Francisco R. Feito Higueruela
2010-04-01
Full Text Available Applications of Geographical Information Systems on several Archeology fields have been increasing during the last years. Recent avances in these technologies make possible to work with more realistic 3D models. In this paper we introduce a new paradigm for this system, the GIS Thetrahedron, in which we define the fundamental elements of GIS, in order to provide a better understanding of their capabilities. At the same time the basic 3D characteristics of some comercial and open source software are described, as well as the application to some samples on archeological researchs
Iliesiu, Luca; Kos, Filip; Poland, David; Pufu, Silviu S.; Simmons-Duffin, David; Yacoby, Ran
2016-03-01
We study the conformal bootstrap for a 4-point function of fermions in 3D. We first introduce an embedding formalism for 3D spinors and compute the conformal blocks appearing in fermion 4-point functions. Using these results, we find general bounds on the dimensions of operators appearing in the ψ × ψ OPE, and also on the central charge C T . We observe features in our bounds that coincide with scaling dimensions in the GrossNeveu models at large N . We also speculate that other features could coincide with a fermionic CFT containing no relevant scalar operators.
Ms. Swapnali R. Ghadge
2013-01-01
In today’s ever-shifting media landscape, it can be a complex task to find effective ways to reach your desired audience. As traditional media such as television continue to lose audience share, one venue in particular stands out for its ability to attract highly motivated audiences and for its tremendous growth potential the 3D Internet. The concept of '3D Internet' has recently come into the spotlight in the R&D arena, catching the attention of many people, and leading to a lot o...
Kotek, L.
2015-01-01
This paper is about 3D scan of plaster dental casts. The main aim of the work is a hardware and software proposition of 3D scan system for scanning of dental casts. There were used camera, projector and rotate table for this scanning system. Surface triangulation was used, taking benefits of projections of structured light on object, which is being scanned. The rotate table is controlled by PC. The camera, projector and rotate table are synchronized by PC. Controlling of stepper motor is prov...
Villaume, René Domine; Ørstrup, Finn Rude
2002-01-01
Projektet undersøger potentialet for interaktiv 3D design via Internettet. Arkitekt Jørn Utzons projekt til Espansiva blev udviklet som et byggesystem med det mål, at kunne skabe mangfoldige planmuligheder og mangfoldige facade- og rumudformninger. Systemets bygningskomponenter er digitaliseret som...... 3D elementer og gjort tilgængelige. Via Internettet er det nu muligt at sammenstille og afprøve en uendelig række bygningstyper som systemet blev tænkt og udviklet til....
Asynchronous Multiparty Computation
Damgård, Ivan Bjerre; Geisler, Martin; Krøigaard, Mikkel;
2009-01-01
We propose an asynchronous protocol for general multiparty computation. The protocol has perfect security and communication complexity where n is the number of parties, |C| is the size of the arithmetic circuit being computed, and k is the size of elements in the underlying field. The protocol...... multithreading. Benchmarking of a VIFF implementation of our protocol confirms that it is applicable to practical non-trivial secure computations....
Asynchronous Variational Integrators
Lew, A.; Marsden, J. E.; Ortiz, M.; West, M
2003-01-01
We describe a new class of asynchronous variational integrators (AVI) for nonlinear elastodynamics. The AVIs are distinguished by the following attributes: (i) The algorithms permit the selection of independent time steps in each element, and the local time steps need not bear an integral relation to each other; (ii) the algorithms derive from a spacetime form of a discrete version of Hamilton’s variational principle. As a consequence of this variational structure, the algorith...
Text Mining: (Asynchronous Sequences
Sheema Khan
2014-12-01
Full Text Available In this paper we tried to correlate text sequences those provides common topics for semantic clues. We propose a two step method for asynchronous text mining. Step one check for the common topics in the sequences and isolates these with their timestamps. Step two takes the topic and tries to give the timestamp of the text document. After multiple repetitions of step two, we could give optimum result.
M.M. Voormolen
2007-01-01
textabstractThree dimensional (3D) echocardiography has recently developed from an experimental technique in the â€™90 towards an imaging modality for the daily clinical practice. This dissertation describes the considerations, implementation, validation and clinical application of a unique
Hejlesen, Aske K.; Ovesen, Nis
2012-01-01
This paper presents an experimental approach to teaching 3D modelling techniques in an Industrial Design programme. The approach includes the use of tangible free form models as tools for improving the overall learning. The paper is based on lecturer and student experiences obtained through...
Stenholt, Rasmus; Madsen, Claus B.
2011-01-01
Enabling users to shape 3-D boxes in immersive virtual environments is a non-trivial problem. In this paper, a new family of techniques for creating rectangular boxes of arbitrary position, orientation, and size is presented and evaluated. These new techniques are based solely on position data...
Asynchronous Bounded Expected Delay Networks
Bakhshi, Rena; Endrullis, Jörg; Fokkink, Wan; Pang, Jun
2010-01-01
The commonly used asynchronous bounded delay (ABD) network models assume a fixed bound on message delay. We propose a probabilistic network model, called asynchronous bounded expected delay (ABE) model. Instead of a strict bound, the ABE model requires only a bound on the expected message delay. While the conditions of ABD networks restrict the set of possible executions, in ABE networks all asynchronous executions are possible, but executions with extremely long delays are less probable. In ...
Robertson, C., E-mail: christian.robertson@cea.fr [Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India); Commissariat a l' Energie Atomique, SRMA Saclay, 91191 Gif-sur-Yvette (France); Gururaj, K. [Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102, Tamil Nadu (India)
2011-08-15
Ferritic steels strengthened by oxide particle dispersions (ODS) are prime candidate for future nuclear applications. So far, the beneficial mechanical characteristics of ODS steels are not fully understood, in terms of dislocation-based mechanisms. In this work, three-dimensional discrete dislocation dynamics simulations were carried out to analyze pre and post-irradiation plastic deformation in ferritic grains, with and without ODS particles. In the absence of irradiation induced defect loops, ODS-grains are stronger and plastic strain is more localized than in the corresponding, particle-free grain. After irradiation however, ODS-grain become more resistant to loop-induced hardening, while plastic strain spreading is broader, with respect to particle-free grain. This effect is due to dislocations accumulating next to the precipitates, generating internal stress allowing cross-slipped dislocations to go past the irradiation induced defect loops. Cross-slip is therefore a key feature of our model, for explaining the beneficial role of ODS particles on post-irradiation plastic deformation.
Klusoň, Jindřich
2010-01-01
Computer animation has a growing importance and application in the world. With expansion of technologies increases quality of the final animation as well as number of 3D animation software. This thesis is currently mapped animation software for creating animation in film, television industry and video games which are advisable users requirements. Of them were selected according to criteria the best - Autodesk Maya 2011. This animation software is unique with tools for creating special effects...
Elena eBoccardi
2015-11-01
Full Text Available The design and characterization of a new family of multifunctional scaffolds based on bioactive glass (BG of 45S5 composition for bone tissue engineering and drug delivery applications is presented. These BG-based scaffolds are developed via a replication method of polyurethane packaging foam. In order to increase the therapeutic functionality, the scaffolds were coated with mesoporous silica particles (MCM-41, which act as an in-situ drug delivery system. These sub-micron spheres are characterized by large surface area and pore volume with a narrow pore diameter distribution. The solution used for the synthesis of the silica mesoporous particles was designed to obtain at the same time a high ordered mesoporous structure and spherical shape, both are key factors for achieving the desired controlled drug release. The MCM-41 particles were synthesized directly inside the BG-based scaffolds and the drug release capability of this combined system was evaluated. Moreover the effect of MCM-41 particle coating on the bioactivity of the BG-based scaffolds was assessed. The results indicate that it is possible to obtain a multifunctional scaffold system characterized by high and interconnected porosity, high bioactivity and sustained drug delivery capability.
Boccardi, Elena; Philippart, Anahí; Juhasz-Bortuzzo, Judith A.; Beltrán, Ana M.; Novajra, Giorgia; Vitale-Brovarone, Chiara; Spiecker, Erdmann; Boccaccini, Aldo R.
2015-01-01
The design and characterization of a new family of multifunctional scaffolds based on bioactive glass (BG) of 45S5 composition for bone tissue engineering and drug delivery applications are presented. These BG-based scaffolds are developed via a replication method of polyurethane packaging foam. In order to increase the therapeutic functionality, the scaffolds were coated with mesoporous silica particles (MCM-41), which act as an in situ drug delivery system. These sub-micron spheres are characterized by large surface area and pore volume with a narrow pore diameter distribution. The solution used for the synthesis of the silica mesoporous particles was designed to obtain a high-ordered mesoporous structure and spherical shape – both are key factors for achieving the desired controlled drug release. The MCM-41 particles were synthesized directly inside the BG-based scaffolds, and the drug-release capability of this combined system was evaluated. Moreover, the effect of MCM-41 particle coating on the bioactivity of the BG-based scaffolds was assessed. The results indicate that it is possible to obtain a multifunctional scaffold system characterized by high and interconnected porosity, high bioactivity, and sustained drug delivery capability. PMID:26594642
Santasusana, Miquel; Irazábal, Joaquín; Oñate, Eugenio; Carbonell, Josep Maria
2016-07-01
In this work, we present a new methodology for the treatment of the contact interaction between rigid boundaries and spherical discrete elements (DE). Rigid body parts are present in most of large-scale simulations. The surfaces of the rigid parts are commonly meshed with a finite element-like (FE) discretization. The contact detection and calculation between those DE and the discretized boundaries is not straightforward and has been addressed by different approaches. The algorithm presented in this paper considers the contact of the DEs with the geometric primitives of a FE mesh, i.e. facet, edge or vertex. To do so, the original hierarchical method presented by Horner et al. (J Eng Mech 127(10):1027-1032, 2001) is extended with a new insight leading to a robust, fast and accurate 3D contact algorithm which is fully parallelizable. The implementation of the method has been developed in order to deal ideally with triangles and quadrilaterals. If the boundaries are discretized with another type of geometries, the method can be easily extended to higher order planar convex polyhedra. A detailed description of the procedure followed to treat a wide range of cases is presented. The description of the developed algorithm and its validation is verified with several practical examples. The parallelization capabilities and the obtained performance are presented with the study of an industrial application example.
Terajets produced by 3D dielectric cuboids
Pacheco-Peña, V; Minin, I V; Minin, O V
2014-01-01
The capability of generating terajets using 3D dielectric cuboids working at terahertz (THz) frequencies (as analogues of nanojets in the infrared band) are introduced and studied numerically. The focusing performance of the terajets are evaluated in terms of the transversal full width at half maximum along x- and y- directions using different refractive indexes for a 3D dielectric cuboid with a fixed geometry, obtaining a quasi-symmetric terajet with a subwavelength resolution of ~0.46{\\lambda}0 when the refractive index is n = 1.41. Moreover, the backscattering enhancement produced when metal particles are introduced in the terajet region is demonstrated for a 3D dielectric cuboid and compared with its 2D counterpart. The results of the jet generated for the 3D case are experimentally validated at sub-THz waves, demonstrating the ability to produce terajets using 3D cuboids.
Boccardi, Elena; Philippart, Anahí; Juhasz-Bortuzzo, Judith A.; Beltrán, Ana M.; Novajra, Giorgia; Vitale-Brovarone, Chiara; Spiecker, Erdmann; Boccaccini , Aldo R.
2015-01-01
The design and characterization of a new family of multifunctional scaffolds based on bioactive glass (BG) of 45S5 composition for bone tissue engineering and drug delivery applications are presented. These BG-based scaffolds are developed via a replication method of polyurethane packaging foam. In order to increase the therapeutic functionality, the scaffolds were coated with mesoporous silica particles (MCM-41), which act as an in situ drug delivery system. These sub-micron spheres are char...
Andringa, Roel; de Roo, Mees; Hohm, Olaf; Sezgin, Ergin; Townsend, Paul K
2009-01-01
We construct the N=1 three-dimensional supergravity theory with cosmological, Einstein-Hilbert, Lorentz Chern-Simons, and general curvature squared terms. We determine the general supersymmetric configuration, and find a family of supersymmetric adS vacua with the supersymmetric Minkowski vacuum as a limiting case. Linearizing about the Minkowski vacuum, we find three classes of unitary theories; one is the supersymmetric extension of the recently discovered `massive 3D gravity'. Another is a `new topologically massive supergravity' (with no Einstein-Hilbert term) that propagates a single (2,3/2) helicity supermultiplet.
Andringa, Roel; Bergshoeff, Eric A; De Roo, Mees; Hohm, Olaf [Centre for Theoretical Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); Sezgin, Ergin [George and Cynthia Woods Mitchell Institute for Fundamental Physics and Astronomy, Texas A and M University, College Station, TX 77843 (United States); Townsend, Paul K, E-mail: E.A.Bergshoeff@rug.n, E-mail: O.Hohm@rug.n, E-mail: sezgin@tamu.ed, E-mail: P.K.Townsend@damtp.cam.ac.u [Department of Applied Mathematics and Theoretical Physics, Centre for Mathematical Sciences, University of Cambridge, Wilberforce Road, Cambridge, CB3 0WA (United Kingdom)
2010-01-21
We construct the N=1 three-dimensional supergravity theory with cosmological, Einstein-Hilbert, Lorentz Chern-Simons, and general curvature squared terms. We determine the general supersymmetric configuration, and find a family of supersymmetric adS vacua with the supersymmetric Minkowski vacuum as a limiting case. Linearizing about the Minkowski vacuum, we find three classes of unitary theories; one is the supersymmetric extension of the recently discovered 'massive 3D gravity'. Another is a 'new topologically massive supergravity' (with no Einstein-Hilbert term) that propagates a single (2,3/2) helicity supermultiplet.
Ms. Swapnali R. Ghadge
2013-08-01
Full Text Available In today’s ever-shifting media landscape, it can be a complex task to find effective ways to reach your desired audience. As traditional media such as television continue to lose audience share, one venue in particular stands out for its ability to attract highly motivated audiences and for its tremendous growth potential the 3D Internet. The concept of '3D Internet' has recently come into the spotlight in the R&D arena, catching the attention of many people, and leading to a lot of discussions. Basically, one can look into this matter from a few different perspectives: visualization and representation of information, and creation and transportation of information, among others. All of them still constitute research challenges, as no products or services are yet available or foreseen for the near future. Nevertheless, one can try to envisage the directions that can be taken towards achieving this goal. People who take part in virtual worlds stay online longer with a heightened level of interest. To take advantage of that interest, diverse businesses and organizations have claimed an early stake in this fast-growing market. They include technology leaders such as IBM, Microsoft, and Cisco, companies such as BMW, Toyota, Circuit City, Coca Cola, and Calvin Klein, and scores of universities, including Harvard, Stanford and Penn State.
3D Molecular dynamics simulations using spheropolytopes
Galindo-Torres, Sergio-Andres; Alonso-Marroquin, Fernando; Wang, Yucang
2008-01-01
We present a simple and efficient method to simulate three-dimensional, complex-shaped, interacting bodies. The particle shape is represented by Minkowski operators. A time-continuous interaction between these bodies is derived using simple concepts of computational geometry. The model (particles + interactions) is efficient, accurate and easy to implement, and it complies with the conservation laws of physics. 3D simulations of hopper flow shows that the non-convexity of the particles strong...
Volumetric motion quantification by 3D tissue phase mapped CMR
Lutz Anja
2012-10-01
Full Text Available Abstract Background The objective of this study was the quantification of myocardial motion from 3D tissue phase mapped (TPM CMR. Recent work on myocardial motion quantification by TPM has been focussed on multi-slice 2D acquisitions thus excluding motion information from large regions of the left ventricle. Volumetric motion assessment appears an important next step towards the understanding of the volumetric myocardial motion and hence may further improve diagnosis and treatments in patients with myocardial motion abnormalities. Methods Volumetric motion quantification of the complete left ventricle was performed in 12 healthy volunteers and two patients applying a black-blood 3D TPM sequence. The resulting motion field was analysed regarding motion pattern differences between apical and basal locations as well as for asynchronous motion pattern between different myocardial segments in one or more slices. Motion quantification included velocity, torsion, rotation angle and strain derived parameters. Results All investigated motion quantification parameters could be calculated from the 3D-TPM data. Parameters quantifying hypokinetic or asynchronous motion demonstrated differences between motion impaired and healthy myocardium. Conclusions 3D-TPM enables the gapless volumetric quantification of motion abnormalities of the left ventricle, which can be applied in future application as additional information to provide a more detailed analysis of the left ventricular function.
Asynchronous Power Flow Controller
Rahul Juneja
2014-04-01
Full Text Available In the present system demand of electrical power increases so fast and transfer of electrical power is need of today‟s scenario. . The electrical power is transfer at same frequency through AC transmission line. However, power generation may be at different frequencies such as wind generation, sources at islanding or power generation in different countries. The proposed Asynchronous Power Flow Controller (APFC system essentially consists of two back-to-back voltage source converters as “Shunt Converter” and “Series Converter” which is coupled via a common dc link provided by a dc storage capacitor This paper suggests the power transfer and control between the sources operating at different or same frequencies.
Optimal two-dimensional, three-dimensional wave launching configurations are proposed for enhanced acceleration of charged particles in magnetized plasmas. A primary wave is launched obliquely with respect to the magnetic field and a secondary, low amplitude, wave is launched perpendicularly. The effect of both the launching angle of the primary wave, and the presence of the secondary wave is investigated. Theoretical predictions of the highest performances of the three-dimensional configurations are proposed using a Resonance Moments Method (RMM) based on estimates for the moments of the velocity distribution function calculated inside the resonance layers (RL). They suggest the existence of an optimal angle corresponding to non parallel launching. Direct statistical simulations show that it is possible to rise the mean electron velocity up to the order of magnitude as compared to the primary wave launching alone. It is a quite promising result because the amplitude of the secondary wave is ten times lower than the one of the first wave. The parameters used are related to magnetic plasma fusion experiments in electron cyclotron resonance heating and electron acceleration in planetary ionospheres and magnetospheres. (authors)
Pro asynchronous programming with .NET
Blewett, Richard; Ltd, Rock Solid Knowledge
2014-01-01
Pro Asynchronous Programming with .NET teaches the essential skill of asynchronous programming in .NET. It answers critical questions in .NET application development, such as: how do I keep my program responding at all times to keep my users happy how do I make the most of the available hardware how can I improve performanceIn the modern world, users expect more and more from their applications and devices, and multi-core hardware has the potential to provide it. But it takes carefully crafted code to turn that potential into responsive, scalable applications.With Pro Asynchronous Programming
Hausman, Kalani Kirk
2014-01-01
Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer just a figment of your imagination. This remarkable technology is coming to the masses with the growing availability of 3D printers. 3D printers create 3-dimensional layered models and they allow users to create prototypes that use multiple materials and colors. This friendly-but-straightforward guide examines each type of 3D printing technology available today and gives artists, entrepreneurs, engineers, and hobbyists insight into the amazing things 3D printing has to offer. You'll discover methods for
Szkandera, Jan
2009-01-01
Tato bakalářská práce se zabývá návrhem a realizací systému, který umožní obraz scény zobrazovaný na ploše vnímat prostorově. Prostorové vnímání 2D obrazové informace je umožněno jednak stereopromítáním a jednak tím, že se obraz mění v závislosti na poloze pozorovatele. Tato práce se zabývá hlavně druhým z těchto problémů. This Bachelor's thesis goal is to design and realize system, which allows user to perceive 2D visual information as three-dimensional. 3D visual preception of 2D image i...
Mobile tomographs often have the problem that high spatial resolution is impossible owing to the position or setup of the tomograph. While the tree tomograph developed by Messrs. Isotopenforschung Dr. Sauerwein GmbH worked well in practice, it is no longer used as the spatial resolution and measuring time are insufficient for many modern applications. The paper shows that the mechanical base of the method is sufficient for 3D CT measurements with modern detectors and X-ray tubes. CT measurements with very good statistics take less than 10 min. This means that mobile systems can be used, e.g. in examinations of non-transportable cultural objects or monuments. Enhancement of the spatial resolution of mobile tomographs capable of measuring in any position is made difficult by the fact that the tomograph has moving parts and will therefore have weight shifts. With the aid of tomographies whose spatial resolution is far higher than the mechanical accuracy, a correction method is presented for direct integration of the Feldkamp algorithm
3D Magnetron simulation with CST STUDIO SUITE
The modeling of magnetrons compared to other tubes is more difficult since it requires 3D modeling rather than a 2D investigation. This is not only due to the geometry which can include complicated details to be modeled in 3D but also due to the interaction process itself. The electric field, magnetic field and particle movement span a 3D space. In this paper 3D simulations of a strapped magnetron with CSTSTUDIO SUITETM are presented. (author)
Reducing energy with asynchronous circuits
Rivas Barragan, Daniel
2012-01-01
Reducing energy consumption using asynchronous circuits. The elastic clocks approach has been implemented along with a closed-feedback loop in order to achieve a lower energy consumption along with more reliability in integrated circuits.
X3D: Extensible 3D Graphics Standard
Daly, Leonard; Brutzman, Don
2007-01-01
The article of record as published may be located at http://dx.doi.org/10.1109/MSP.2007.905889 Extensible 3D (X3D) is the open standard for Web-delivered three-dimensional (3D) graphics. It specifies a declarative geometry definition language, a run-time engine, and an application program interface (API) that provide an interactive, animated, real-time environment for 3D graphics. The X3D specification documents are freely available, the standard can be used without paying any royalties,...
3D game environments create professional 3D game worlds
Ahearn, Luke
2008-01-01
The ultimate resource to help you create triple-A quality art for a variety of game worlds; 3D Game Environments offers detailed tutorials on creating 3D models, applying 2D art to 3D models, and clear concise advice on issues of efficiency and optimization for a 3D game engine. Using Photoshop and 3ds Max as his primary tools, Luke Ahearn explains how to create realistic textures from photo source and uses a variety of techniques to portray dynamic and believable game worlds.From a modern city to a steamy jungle, learn about the planning and technological considerations for 3D modelin
Aboufadel, Edward F.
2014-01-01
The purpose of this short paper is to describe a project to manufacture a regular octohedron on a 3D printer. We assume that the reader is familiar with the basics of 3D printing. In the project, we use fundamental ideas to calculate the vertices and faces of an octohedron. Then, we utilize the OPENSCAD program to create a virtual 3D model and an STereoLithography (.stl) file that can be used by a 3D printer.
Rodrigues, Marcos; Robinson, Alan; Alboul, Lyuba; Brink, Willie
2006-01-01
3D face recognition is an open field. In this paper we present a method for 3D facial recognition based on Principal Components Analysis. The method uses a relatively large number of facial measurements and ratios and yields reliable recognition. We also highlight our approach to sensor development for fast 3D model acquisition and automatic facial feature extraction.
孙晓红; 杜龙安; 刘弘; 张晓伟
2012-01-01
针对标准BP神经网络易陷入局部极小值的问题，本文结合全局随机搜索最优解的粒子群优化算法，建立了一种3D动漫造型评价模型，并将其应用到3D动漫造型的生成过程。该模型充分利用粒子群算法的全局寻优特性，优化BP网络的权值和阈值，使网络的均方误差小于或等于目标设定值。实验结果表明，本文方法在保证BP网络能收敛到全局最优解的前提下，加快了BP网络的收敛速度和收敛精度，并在3D动漫造型的进化中具有较好的评价性能，提高了造型的生成质量。%This paper constructs a 3D animation modeling evaluation model with Particle Swarm Optimization (PSO) algorithm and BP network in view of the issues of easy falling of standard BP neural network into local minimum and the global searching of PSO. We apply the model to the generation of 3D animation modeling. It fully utilizes the characteristic of global searching of PSO and optimizes the weights and thresholds of BP network, which makes mean-square error less than or equal to the preset value. Experimental results show that the approach improves the convergence rate and convergence precision of BP network based on the guarantee of the global optimization result. It has preferable evaluation capability in the evolution of 3D animation modelings and improves the quality of 3D animation modelings.
3-D contextual Bayesian classifiers
Larsen, Rasmus
distribution for the pixel values as well as a prior distribution for the configuration of class variables within the cross that is made of a pixel and its four nearest neighbours. We will extend these algorithms to 3-D, i.e. we will specify a simultaneous Gaussian distribution for a pixel and its 6 nearest 3......-D neighbours, and generalise the class variable configuration distributions within the 3-D cross given in 2-D algorithms. The new 3-D algorithms are tested on a synthetic 3-D multivariate dataset....
Asynchronous Distributed Searchlight Scheduling
Obermeyer, Karl J; Bullo, Francesco
2011-01-01
This paper develops and compares two simple asynchronous distributed searchlight scheduling algorithms for multiple robotic agents in nonconvex polygonal environments. A searchlight is a ray emitted by an agent which cannot penetrate the boundary of the environment. A point is detected by a searchlight if and only if the point is on the ray at some instant. Targets are points which can move continuously with unbounded speed. The objective of the proposed algorithms is for the agents to coordinate the slewing (rotation about a point) of their searchlights in a distributed manner, i.e., using only local sensing and limited communication, such that any target will necessarily be detected in finite time. The first algorithm we develop, called the DOWSS (Distributed One Way Sweep Strategy), is a distributed version of a known algorithm described originally in 1990 by Sugihara et al \\cite{KS-IS-MY:90}, but it can be very slow in clearing the entire environment because only one searchlight may slew at a time. In an ...
Asynchronous interactive control systems
Vuskovic, M. I.; Heer, E.
1980-01-01
A class of interactive control systems is derived by generalizing interactive manipulator control systems. The general structural properties of such systems are discussed and an appropriate general software implementation is proposed. This is based on the fact that tasks of interactive control systems can be represented as a network of a finite set of actions which have specific operational characteristics and specific resource requirements, and which are of limited duration. This has enabled the decomposition of the overall control algorithm into a set of subalgorithms, called subcontrollers, which can operate simultaneously and asynchronously. Coordinate transformations of sensor feedback data and actuator set-points have enabled the further simplification of the subcontrollers and have reduced their conflicting resource requirements. The modules of the decomposed control system are implemented as parallel processes with disjoint memory space communicating only by I/O. The synchronization mechanisms for dynamic resource allocation among subcontrollers and other synchronization mechanisms are also discussed in this paper. Such a software organization is suitable for the general form of multiprocessing using computer networks with distributed storage.
Taming Supersymmetric Defects in 3d-3d Correspondence
Gang, Dongmin; Romo, Mauricio; Yamazaki, Masahito
2015-01-01
We study knots in 3d Chern-Simons theory with complex gauge group $SL(N,\\mathbb{C})$, in the context of its relation with 3d $\\mathcal{N}=2$ theory (the so-called 3d-3d correspondence). The defect has either co-dimension 2 or co-dimension 4 inside the 6d $(2,0)$ theory, which is compactified on a 3-manifold $\\hat{M}$. We identify such defects in various corners of the 3d-3d correspondence, namely in 3d $SL(N,\\mathbb{C})$ Chern-Simons theory, in 3d $\\mathcal{N}=2$ theory, in 5d $\\mathcal{N}=2$ super Yang-Mills theory, and in the M-theory holographic dual. We can make quantitative checks of the 3d-3d correspondence by computing partition functions at each of these theories. This Letter is a companion to a longer paper, which contains more details and more results.
ASYNCHRONOUS ELECTRONIC DISCUSSION GROUP:
Tina Lim Swee KIM
2007-01-01
Full Text Available This paper examines the practice of online discussion in a course specially tailored for in-service teachers who are pursuing their basic degree qualification at a teacher training institute. Analyses of postings to the asynchronous electronic discussion group were made according to the type of postings as proposed by Poole (2000. Four focus areas were looked into, that is, content, technical, procedural, or non-academic. Analyses were done for each quarter of the 12 weeks of interaction. At the end of the learners’ participation in the EDG and before their end-of-course examination, the participants were then given a paper-based questionnaire asking their perceptions on the use of EDG as part of their coursework on the whole. Six aspects of EDG were examined, these are;Ø technical aspects, Ø motivation to use the EDG, Ø quality of interaction, Ø tutor’s response, Ø perceived learning, and Ø attitude towards EDG. Analyses on postings for the EDG showed that the bulk of the postings were made in the last quarter of the online discussions. Further, 97.8% of the postings were on content and the types of content posting registered were predominantly questions (41.19% and those that sought clarification/elaboration (37.48%. Findings from this study suggest that overall the participants were satisfied with the six aspects of EDG examined. The aspect that recorded the highest mean was ‘motivation to read tutor’s responses’ whilst the lowest mean (and the only one with negative perception was for ‘worthiness of time spent on online discussions’.
3D Printing Functional Nanocomposites
Leong, Yew Juan
2016-01-01
3D printing presents the ability of rapid prototyping and rapid manufacturing. Techniques such as stereolithography (SLA) and fused deposition molding (FDM) have been developed and utilized since the inception of 3D printing. In such techniques, polymers represent the most commonly used material for 3D printing due to material properties such as thermo plasticity as well as its ability to be polymerized from monomers. Polymer nanocomposites are polymers with nanomaterials composited into the ...
3D IBFV : Hardware-Accelerated 3D Flow Visualization
Telea, Alexandru; Wijk, Jarke J. van
2003-01-01
We present a hardware-accelerated method for visualizing 3D flow fields. The method is based on insertion, advection, and decay of dye. To this aim, we extend the texture-based IBFV technique for 2D flow visualization in two main directions. First, we decompose the 3D flow visualization problem in a
3D Elevation Program—Virtual USA in 3D
Lukas, Vicki; Stoker, J.M.
2016-01-01
The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) uses a laser system called ‘lidar’ (light detection and ranging) to create a virtual reality map of the Nation that is very accurate. 3D maps have many uses with new uses being discovered all the time.
Connell, Ellery
2011-01-01
Helping graphic designers expand their 2D skills into the 3D space The trend in graphic design is towards 3D, with the demand for motion graphics, animation, photorealism, and interactivity rapidly increasing. And with the meteoric rise of iPads, smartphones, and other interactive devices, the design landscape is changing faster than ever.2D digital artists who need a quick and efficient way to join this brave new world will want 3D for Graphic Designers. Readers get hands-on basic training in working in the 3D space, including product design, industrial design and visualization, modeling, ani
Griffey, Jason
2014-01-01
As the maker movement continues to grow and 3-D printers become more affordable, an expanding group of hobbyists is keen to explore this new technology. In the time-honored tradition of introducing new technologies, many libraries are considering purchasing a 3-D printer. Jason Griffey, an early enthusiast of 3-D printing, has researched the marketplace and seen several systems first hand at the Consumer Electronics Show. In this report he introduces readers to the 3-D printing marketplace, covering such topics asHow fused deposition modeling (FDM) printing workBasic terminology such as build
Larsen, Rasmus
1997-01-01
. This includes the specification of a Gaussian distribution for the pixel values as well as a prior distribution for the configuration of class variables within the cross that is m ade of a pixel and its four nearest neighbours. We will extend this algorithm to 3-D, i.e. we will specify a simultaneous Gaussian...... distr ibution for a pixel and its 6 nearest 3-D neighbours, and generalise the class variable configuration distribution within the 3-D cross. The algorithm is tested on a synthetic 3-D multivariate dataset....
3D Bayesian contextual classifiers
Larsen, Rasmus
2000-01-01
We extend a series of multivariate Bayesian 2-D contextual classifiers to 3-D by specifying a simultaneous Gaussian distribution for the feature vectors as well as a prior distribution of the class variables of a pixel and its 6 nearest 3-D neighbours.......We extend a series of multivariate Bayesian 2-D contextual classifiers to 3-D by specifying a simultaneous Gaussian distribution for the feature vectors as well as a prior distribution of the class variables of a pixel and its 6 nearest 3-D neighbours....
Interactive 3D multimedia content
Cellary, Wojciech
2012-01-01
The book describes recent research results in the areas of modelling, creation, management and presentation of interactive 3D multimedia content. The book describes the current state of the art in the field and identifies the most important research and design issues. Consecutive chapters address these issues. These are: database modelling of 3D content, security in 3D environments, describing interactivity of content, searching content, visualization of search results, modelling mixed reality content, and efficient creation of interactive 3D content. Each chapter is illustrated with example a
Miniaturized 3D microscope imaging system
Lan, Yung-Sung; Chang, Chir-Weei; Sung, Hsin-Yueh; Wang, Yen-Chang; Chang, Cheng-Yi
2015-05-01
We designed and assembled a portable 3-D miniature microscopic image system with the size of 35x35x105 mm3 . By integrating a microlens array (MLA) into the optical train of a handheld microscope, the biological specimen's image will be captured for ease of use in a single shot. With the light field raw data and program, the focal plane can be changed digitally and the 3-D image can be reconstructed after the image was taken. To localize an object in a 3-D volume, an automated data analysis algorithm to precisely distinguish profundity position is needed. The ability to create focal stacks from a single image allows moving or specimens to be recorded. Applying light field microscope algorithm to these focal stacks, a set of cross sections will be produced, which can be visualized using 3-D rendering. Furthermore, we have developed a series of design rules in order to enhance the pixel using efficiency and reduce the crosstalk between each microlens for obtain good image quality. In this paper, we demonstrate a handheld light field microscope (HLFM) to distinguish two different color fluorescence particles separated by a cover glass in a 600um range, show its focal stacks, and 3-D position.
无
2003-01-01
The disadvantage remaining in 3D scanning system and its reasons are discussed. A new host-and-slave structure with high speed image acquisition and processing system is proposed to quicken the image processing and improve the performance of 3D scanning system.
ECT Team, Purdue
2015-01-01
Building Bytes, by Brian Peters, is a project that uses desktop 3D printers to print bricks for architecture. Instead of using an expensive custom-made printer, it uses a normal standard 3D printer which is available for everyone and makes it more accessible and also easier for fabrication.