WorldWideScience

Sample records for 2nd generation bio-ethanol

  1. 2nd Generation Alkaline Electrolysis

    Yde, Lars; Kjartansdóttir, Cecilia Kristin; Allebrod, Frank; Mogensen, Mogens Bjerg; Møller, Per; Hilbert, Lisbeth R.; Nielsen, Peter Tommy; Mathiesen, Troels; Jensen, Jørgen; Andersen, Lars; Dierking, Alexander

    This report provides the results of the 2nd Generation Alkaline Electrolysis project which was initiated in 2008. The project has been conducted from 2009-2012 by a consortium comprising Århus University Business and Social Science – Centre for Energy Technologies (CET (former HIRC)), Technical...

  2. Sugarcane bio ethanol and bioelectricity

    Nogueira, Luiz Augusto Horta; Leal, Manoel Regis Lima Verde

    2012-07-01

    This chapter approaches the Brazilian sugar cane production and processing model, sugarcane processing, sugarcane reception, sugarcane preparation and juice extraction, juice treatment, fermentation, distillation, sector efficiencies and future improvement - 2007, 2015 and 2025, present situation (considering the 2007/2008 harvesting season), prospective values for 2015 and for 2025, bioelectricity generation, straw recovery, bagasse availability, energy balance, present situation, perspective for improvements in the GHG mitigation potential, bio ethanol production chain - from field to tank, and surplus electricity generation.

  3. 2nd generation biogas. BioSNG

    The substitution of natural gas by a renewable equivalent is an interesting option to reduce the use of fossil fuels and the accompanying greenhouse gas emissions, as well as from the point of view of security of supply. The renewable alternative for natural gas is green natural gas, i.e. gaseous energy carriers produced from biomass comprising both biogas and Synthetic Natural Gas (SNG). Via this route can be benefited from all the advantages of natural gas, like the existing dense infrastructure, trade and supply network, and natural gas applications. In this presentation attention is paid to the differences between first generation biogas and second generation bioSNG; the market for bioSNG: grid injection vs. transportation fuel; latest update on the lab- and pilot-scale bioSNG development at ECN; and an overview is given of ongoing bioSNG activities worldwide

  4. 2nd Generation alkaline electrolysis. Final report

    Yde, L. [Aarhus Univ. Business and Social Science - Centre for Energy Technologies (CET), Aarhus (Denmark); Kjartansdottir, C.K. [Technical Univ. of Denmark. DTU Mechanical Engineering, Kgs. Lyngby (Denmark); Allebrod, F. [Technical Univ. of Denmark. DTU Energy Conversion, DTU Risoe Campus, Roskilde (Denmark)] [and others

    2013-03-15

    The overall purpose of this project has been to contribute to this load management by developing a 2{sup nd} generation of alkaline electrolysis system characterized by being compact, reliable, inexpensive and energy efficient. The specific targets for the project have been to: 1) Increase cell efficiency to more than 88% (according to the higher heating value (HHV)) at a current density of 200 mA /cm{sup 2}; 2) Increase operation temperature to more than 100 degree Celsius to make the cooling energy more valuable; 3) Obtain an operation pressure more than 30 bar hereby minimizing the need for further compression of hydrogen for storage; 4) Improve stack architecture decreasing the price of the stack with at least 50%; 5) Develop a modular design making it easy to customize plants in the size from 20 to 200 kW; 6) Demonstrating a 20 kW 2{sup nd} generation stack in H2College at the campus of Arhus University in Herning. The project has included research and development on three different technology tracks of electrodes; an electrochemical plating, an atmospheric plasma spray (APS) and finally a high temperature and pressure (HTP) track with operating temperature around 250 deg. C and pressure around 40 bar. The results show that all three electrode tracks have reached high energy efficiencies. In the electrochemical plating track a stack efficiency of 86.5% at a current density of 177mA/cm{sup 2} and a temperature of 74.4 deg. C has been shown. The APS track showed cell efficiencies of 97%, however, coatings for the anode side still need to be developed. The HTP cell has reached 100 % electric efficiency operating at 1.5 V (the thermoneutral voltage) with a current density of 1. 1 A/cm{sup 2}. This track only tested small cells in an externally heated laboratory set-up, and thus the thermal loss to surroundings cannot be given. The goal set for the 2{sup nd} generation electrolyser system, has been to generate 30 bar pressure in the cell stack. An obstacle to be

  5. The 2nd Generation VLTI path to performance

    Woillez, Julien; Berger, Jean-Philippe; Bonnet, Henri; de Wit, Willem-Jan; Egner, Sebastian; Eisenhauer, Frank; Gonté, Frédéric; Guieu, Sylvain; Haguenauer, Pierre; Mérand, Antoine; Pettazzi, Lorenzo; Poupar, Sébastien; Schöller, Markus; Schuhler, Nicolas

    2016-01-01

    The upgrade of the VLTI infrastructure for the 2nd generation instruments is now complete with the transformation of the laboratory, and installation of star separators on both the 1.8-m Auxiliary Telescopes (ATs) and the 8-m Unit Telescopes (UTs). The Gravity fringe tracker has had a full semester of commissioning on the ATs, and a first look at the UTs. The CIAO infrared wavefront sensor is about to demonstrate its performance relative to the visible wavefront sensor MACAO. First astrometric measurements on the ATs and astrometric qualification of the UTs are on-going. Now is a good time to revisit the performance roadmap for VLTI that was initiated in 2014, which aimed at coherently driving the developments of the interferometer, and especially its performance, in support to the new generation of instruments: Gravity and MATISSE.

  6. Super Boiler 2nd Generation Technology for Watertube Boilers

    Mr. David Cygan; Dr. Joseph Rabovitser

    2012-03-31

    This report describes Phase I of a proposed two phase project to develop and demonstrate an advanced industrial watertube boiler system with the capability of reaching 94% (HHV) fuel-to-steam efficiency and emissions below 2 ppmv NOx, 2 ppmv CO, and 1 ppmv VOC on natural gas fuel. The boiler design would have the capability to produce >1500 F, >1500 psig superheated steam, burn multiple fuels, and will be 50% smaller/lighter than currently available watertube boilers of similar capacity. This project is built upon the successful Super Boiler project at GTI. In that project that employed a unique two-staged intercooled combustion system and an innovative heat recovery system to reduce NOx to below 5 ppmv and demonstrated fuel-to-steam efficiency of 94% (HHV). This project was carried out under the leadership of GTI with project partners Cleaver-Brooks, Inc., Nebraska Boiler, a Division of Cleaver-Brooks, and Media and Process Technology Inc., and project advisors Georgia Institute of Technology, Alstom Power Inc., Pacific Northwest National Laboratory and Oak Ridge National Laboratory. Phase I of efforts focused on developing 2nd generation boiler concepts and performance modeling; incorporating multi-fuel (natural gas and oil) capabilities; assessing heat recovery, heat transfer and steam superheating approaches; and developing the overall conceptual engineering boiler design. Based on our analysis, the 2nd generation Industrial Watertube Boiler when developed and commercialized, could potentially save 265 trillion Btu and $1.6 billion in fuel costs across U.S. industry through increased efficiency. Its ultra-clean combustion could eliminate 57,000 tons of NOx, 460,000 tons of CO, and 8.8 million tons of CO2 annually from the atmosphere. Reduction in boiler size will bring cost-effective package boilers into a size range previously dominated by more expensive field-erected boilers, benefiting manufacturers and end users through lower capital costs.

  7. Bio ethanol production from oil palm empty fruit bunches

    Full text: The oil palm industry has an abundance of oil palm biomass. The type of biomass generated includes empty fruit bunches (EFB), oil palm trunk (OPT), kernel, shell and fronds. Generally, ligno celluloses biomass derived from oil palm has great potential to be converted into various forms of renewable energy. In this study, EFB in pulverized form was used as a feedstock for bio ethanol production. EFB contains lignin, hemicelluloses and cellulose which can be converted into fermentable sugar and bio ethanol. The EFB was initially pre-treated with 1% NaOH followed by acid hydrolysis with 0.7% sulfuric acid and enzyme prior to fermentation process with Saccharomyces cerevisea. The various process parameters for bio ethanol production was optimized i.e. pH, temperature, rate of agitation and initial feedstock concentration. The fermentation of EFB hydrolysate was at pH 4, 30 degree Celsius and 100 rpm within 72 hours of incubation yielded 10.48 g/L of bio ethanol from 50 g/L of EFB. The bio ethanol production in a 6-L bioreactor showed 36% conversion of fermentable sugar from EFB into bio ethanol. (author)

  8. The 2nd Generation Real Time Mission Monitor (RTMM) Development

    Blakeslee, R. J.; Goodman, M.; Hardin, D. M.; Hall, J.; Yubin He, M.; Regner, K.; Conover, H.; Smith, T.; Meyer, P.; Lu, J.; Garrett, M.

    2009-12-01

    The NASA Real Time Mission Monitor (RTMM) is a visualization and information system that fuses multiple Earth science data sources, to enable real time decision-making for airborne and ground validation experiments. Developed at the National Aeronautics and Space Administration (NASA) Marshall Space Flight Center, RTMM is a situational awareness, decision-support system that integrates satellite imagery and orbit data, radar and other surface observations (e.g., lightning location network data), airborne navigation and instrument data sets, model output parameters, and other applicable Earth science data sets. The integration and delivery of this information is made possible using data acquisition systems, network communication links, network server resources, and visualizations through the Google Earth virtual globe application. In order to improve the usefulness and efficiency of the RTMM system, capabilities are being developed to allow the end-user to easily configure RTMM applications based on their mission-specific requirements and objectives. This second generation RTMM is being redesigned to take advantage of the Google plug-in capabilities to run multiple applications in a web browser rather than the original single application Google Earth approach. Currently RTMM employs a limited Service Oriented Architecture approach to enable discovery of mission specific resources. We are expanding the RTMM architecture such that it will more effectively utilize the Open Geospatial Consortium Sensor Web Enablement services and other new technology software tools and components. These modifications and extensions will result in a robust, versatile RTMM system that will greatly increase flexibility of the user to choose which science data sets and support applications to view and/or use. The improvements brought about by RTMM 2nd generation system will provide mission planners and airborne scientists with enhanced decision-making tools and capabilities to more

  9. From 1st- to 2nd-Generation Biofuel Technologies: Extended Executive Summary

    NONE

    2008-07-01

    This report looks at the technical challenges facing 2nd-generation biofuels, evaluates their costs and examines related current policies to support their development and deployment. The potential for production of more advanced biofuels is also discussed. Although significant progress continues to be made to overcome the technical and economic challenges, 2nd-generation biofuels still face major constraints to their commercial deployment.

  10. Bio-ethanol steam reforming and autothermal reforming in 3- m channels coated with RhPd/CeO2 for hydrogen generation

    Divins, N.J.; López, Eduardo; Rodríguez Martínez, Ángel; Vega, Didac; Llorca Piqué, Jordi

    2013-01-01

    A silicon micromonolith of 7 mm diameter and 0.2 mm length containing 1.5 million regular channels with a diameter of 3.3 μm was used for obtaining hydrogen through ethanol or bio-ethanol steam reforming (ESR) and oxidative steam reforming (OSR). The microchannels were coated with RhPd/CeO2 catalyst by a two-step method. First a CeO2 layer of ca. 100 nm thickness was deposited from cerium methoxyethoxide over a SiO2 layer, which was previously grown over the silicon microchannels by oxidation...

  11. Potential of sweet potato mutant lines for bio ethanol production

    Shoots of sweet potato Sari variety were irradiated at the doses of 0, 10, 20, 30 and 40 Gy. Irradiated shoots were planted and selected to obtain better mutant lines than that of the parent plant. Ten mutant lines were from the fourth generation which better morphology and productivity than that of the parent plant. The best productivity was found at mutant line number 40-2 which was 717.50 g/plant compared to parent plant with 622.50 g/plant. The highest glucose and starch content obtained were at the dose of 20 Gy which were 8.85 and 28.56 % respectively. The mutant line of Sari sweet potato has a potential to produce bio ethanol. The bio-ethanol production from those of mutant lines at a range of 15.02 to 19.46 % compared to 13.67 % in the parent plant. The mutant line number 20 was the best line to produce bio-ethanol. The aim of this experiment was to find mutant lines having potential to produce bio-ethanol. (author)

  12. Intergenerational Transmission and the School-to-work Transition for 2nd Generation Immigrants

    Nielsen, Helena Skyt; Rosholm, Michael; Smith, Nina;

    2001-01-01

    We analyse the extent of intergenerational transmission through parental capital, ethnic capital and neighbourhood effects on several aspects of the school-to-work transition of 2nd generation immigrants and young ethnic Danes. The main findings are that parental capital has strong positive effects...... on the probability of completing a qualifying education and on the entry into the labour market, but it has a much smaller impact on the duration of the first employment spell and on the wage level. Growing up in neighbourhoods with a high concentration of immigrants is associated with negative...... labour market prospects both for young natives and 2nd generation immigrants....

  13. Performance and validation of COMPUCEA 2nd generation for uranium measurements in physical inventory verifications

    Full text: In order to somewhat alleviate the kind of logistical problems encountered in the in-field measurements with the current COMPUCEA equipment (COMbined Product for Uranium Content and Enrichment Assay), and with the expected benefits of saving some time and costs for the missions in mind, ITU is presently developing a 2nd generation of the COMPUCEA device. This new development also forms a task in the support programme of the Joint Research Centre of the European Commission to the IAEA. To validate the in-field performance of the newly developed 2nd generation COMPUCEA, a prototype has been tested together with the 1st generation equipment during physical inventory verification (PIV) measurements in different uranium fuel fabrication plants in Europe. In this paper we will present the prototype of COMPUCEA 2nd generation, its hardware as well as the software developed for the evaluation of the U content and 235U enrichment. We will show a comparison of the performance of the 2nd generation with the 1st generation on a larger number of uranium samples measured during the in-field PIVs. The observed excellent performance of the new COMPUCEA represents an important step in the validation of this new instrument. (author)

  14. Intergenerational Transmission and the School-to-work Transition for 2nd Generation Immigrants

    Nielsen, Helena Skyt; Rosholm, Michael; Smith, Nina;

    2001-01-01

    We analyse the extent of intergenerational transmission through parental capital, ethnic capital and neighbourhood effects on several aspects of the school-to-work transition of 2nd generation immigrants and young ethnic Danes. The main findings are that parental capital has strong positive effects...

  15. The 1997 Protocol and the European Union (European Union and '2nd generation' responsibility conventions)

    The issue of accession of the Eastern European Member States to the 1997 Protocol is discussed with focus on the European Union's authority and enforcement powers. Following up the article published in the preceding issue of this journal, the present contribution analyses the relations of the '2nd generation' responsibility conventions to the law of the European Union. (orig.)

  16. A ZeroDimensional Model of a 2nd Generation Planar SOFC Using Calibrated Parameters

    Brian Elmegaard; Niels Houbak; Thomas Frank Petersen

    2006-01-01

    This paper presents a zero-dimensional mathematical model of a planar 2nd generation coflow SOFC developed for simulation of power systems. The model accounts for the electrochemical oxidation of hydrogen as well as the methane reforming reaction and the water-gas shift reaction. An important part of the paper is the electrochemical sub-model, where experimental data was used to calibrate specific parameters. The SOFC model was implemented in the DNA simulation software which is designed for ...

  17. Performance and validation of COMPUCEA 2nd generation for uranium measurements in physical inventory verification

    A new instrumental version of COMPUCEA has been developed with the aim to provide a simplified and more practical instrumentation for in-field use. The main design goals were to eliminate the radioactive sources and the liquid nitrogen-cooled Ge detectors used in the 1st generation of COMPUCEA. This paper describes the major technical features of the 2nd generation of equipment together with typical performance data. The performance tests carried out during first in-field measurements in the course of physical inventory verification campaigns represent an important step in the validation of this new instrument. (author)

  18. Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

    Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

    2002-01-01

    The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

  19. A ZeroDimensional Model of a 2nd Generation Planar SOFC Using Calibrated Parameters

    Brian Elmegaard

    2006-12-01

    Full Text Available This paper presents a zero-dimensional mathematical model of a planar 2nd generation coflow SOFC developed for simulation of power systems. The model accounts for the electrochemical oxidation of hydrogen as well as the methane reforming reaction and the water-gas shift reaction. An important part of the paper is the electrochemical sub-model, where experimental data was used to calibrate specific parameters. The SOFC model was implemented in the DNA simulation software which is designed for energy system simulation. The result is an accurate and flexible tool suitable for simulation of many different SOFC-based power systems.

  20. Boosting biogas yield of anaerobic digesters by utilizing concentrated molasses from 2nd generation bioethanol plant

    Shiplu Sarker, Henrik Bjarne Møller

    2013-01-01

    Concentrated molasses (C5 molasses) from 2nd generation bioethanol plant has been investigated for enhancing productivity of manure based digesters. A batch study at mesophilic condition (35±1C) showed the maximum methane yield from molasses as 286 LCH4/kgVS which was approximately 63% of the calculated theoretical yield. In addition to the batch study, co-digestion of molasses with cattle manure in a semi-continuously stirred reactor at thermophilic temperature (50±1°C) was also performed wi...

  1. Effects of Thermal Cycling on Control and Irradiated EPC 2nd Generation GaN FETs

    Patterson, Richard L.; Scheick, Leif; Lauenstein, Jean-Marie; Casey, Megan; Hammoud, Ahmad

    2013-01-01

    The power systems for use in NASA space missions must work reliably under harsh conditions including radiation, thermal cycling, and exposure to extreme temperatures. Gallium nitride semiconductors show great promise, but information pertaining to their performance is scarce. Gallium nitride N-channel enhancement-mode field effect transistors made by EPC Corporation in a 2nd generation of manufacturing were exposed to radiation followed by long-term thermal cycling in order to address their reliability for use in space missions. Results of the experimental work are presented and discussed.

  2. Advanced Electron Beam Ion Sources (EBIS) for 2-nd generation carbon radiotherapy facilities

    In this work we analyze how advanced Electron Beam Ion Sources (EBIS) can facilitate the progress of carbon therapy facilities. We will demonstrate that advanced ion sources enable operation of 2-nd generation ion beam therapy (IBT) accelerators. These new accelerator concepts with designs dedicated to IBT provide beams better suited for therapy and, are more cost efficient than contemporary IBT facilities. We will give a sort overview of the existing new IBT concepts and focus on those where ion source technology is the limiting factor. We will analyse whether this limitation can be overcome in the near future thanks to ongoing EBIS development

  3. Advanced Electron Beam Ion Sources (EBIS) for 2-nd generation carbon radiotherapy facilities

    Shornikov, A.; Wenander, F.

    2016-04-01

    In this work we analyze how advanced Electron Beam Ion Sources (EBIS) can facilitate the progress of carbon therapy facilities. We will demonstrate that advanced ion sources enable operation of 2-nd generation ion beam therapy (IBT) accelerators. These new accelerator concepts with designs dedicated to IBT provide beams better suited for therapy and, are more cost efficient than contemporary IBT facilities. We will give a sort overview of the existing new IBT concepts and focus on those where ion source technology is the limiting factor. We will analyse whether this limitation can be overcome in the near future thanks to ongoing EBIS development.

  4. Emotional and Behavioral Disorders in 1.5th Generation, 2nd Generation Immigrant Children, and Foreign Adoptees.

    Tan, Tony Xing

    2016-10-01

    Existing theories (e.g., acculturative stress theory) cannot adequately explain why mental disorders in immigrants are less prevalent than in non-immigrants. In this paper, the culture-gene co-evolutionary theory of mental disorders was utilized to generate a novel hypothesis that connection to heritage culture reduces the risk for mental disorders in immigrant children. Four groups of children aged 2-17 years were identified from the 2007 United States National Survey of Children's Health: 1.5th generation immigrant children (n = 1378), 2nd generation immigrant children (n = 4194), foreign adoptees (n = 270), and non-immigrant children (n = 54,877). The 1.5th generation immigrant children's connection to their heritage culture is stronger than or similar to the 2nd generation immigrants, while the foreign adoptees have little connection to their birth culture. Controlling for age, sex, family type and SES, the odds for having ADD/ADHD, Conduct Disorder, Anxiety Disorder, and Depression diagnosis were the lowest for the 1.5th generation immigrant children, followed by the 2nd generation immigrant children and the foreign adoptees. The foreign adoptees and non-adopted children were similar in the odds of having these disorders. Connection to heritage culture might be the underlying mechanism that explained recent immigrants' lower rates of mental disorders. PMID:26972324

  5. The Planar Optics Phase Sensor: a study for the VLTI 2nd Generation Fringe Tracker

    Blind, Nicolas; Absil, Olivier; Alamir, Mazen; Berger, Jean-Philippe; Defrère, Denis; Feautrier, Philippe; Hénault, Franois; Jocou, Laurent; Kern, Pierre; Laurent, Thomas; Malbet, Fabien; Mourard, Denis; Rousselet-Perrault, Karine; Sarlette, Alain; Surdej, Jean; Tarmoul, Nassima; Tatulli, Eric; Vincent, Lionel; 10.1117/12.857114

    2010-01-01

    In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

  6. Enabling the 2nd Generation in Space: Building Blocks for Large Scale Space Endeavours

    Barnhardt, D.; Garretson, P.; Will, P.

    Today the world operates within a "first generation" space industrial enterprise, i.e. all industry is on Earth, all value from space is from bits (data essentially), and the focus is Earth-centric, with very limited parts of our population and industry participating in space. We are limited in access, manoeuvring, on-orbit servicing, in-space power, in-space manufacturing and assembly. The transition to a "Starship culture" requires the Earth to progress to a "second generation" space industrial base, which implies the need to expand the economic sphere of activity of mankind outside of an Earth-centric zone and into CIS-lunar space and beyond, with an equal ability to tap the indigenous resources in space (energy, location, materials) that will contribute to an expanding space economy. Right now, there is no comfortable place for space applications that are not discovery science, exploration, military, or established earth bound services. For the most part, space applications leave out -- or at least leave nebulous, unconsolidated, and without a critical mass -- programs and development efforts for infrastructure, industrialization, space resources (survey and process maturation), non-traditional and persistent security situational awareness, and global utilities -- all of which, to a far greater extent than a discovery and exploration program, may help determine the elements of a 2nd generation space capability. We propose a focus to seed the pre-competitive research that will enable global industry to develop the necessary competencies that we currently lack to build large scale space structures on-orbit, that in turn would lay the foundation for long duration spacecraft travel (i.e. key technologies in access, manoeuvrability, etc.). This paper will posit a vision-to-reality for a step wise approach to the types of activities the US and global space providers could embark upon to lay the foundation for the 2nd generation of Earth in space.

  7. The New 2nd-Generation SRF R&D Facility at Jefferson Lab: TEDF

    Reece, Charles E.; Reilly, Anthony V.

    2012-09-01

    The US Department of Energy has funded a near-complete renovation of the SRF-based accelerator research and development facilities at Jefferson Lab. The project to accomplish this, the Technical and Engineering Development Facility (TEDF) Project has completed the first of two phases. An entirely new 3,100 m{sup 2} purpose-built SRF technical work facility has been constructed and was occupied in summer of 2012. All SRF work processes with the exception of cryogenic testing have been relocated into the new building. All cavity fabrication, processing, thermal treatment, chemistry, cleaning, and assembly work is collected conveniently into a new LEED-certified building. An innovatively designed 800 m2 cleanroom/chemroom suite provides long-term flexibility for support of multiple R&D and construction projects as well as continued process evolution. The characteristics of this first 2nd-generation SRF facility are described.

  8. Boosting biogas yield of anaerobic digesters by utilizing concentrated molasses from 2nd generation bioethanol plant

    Sarker, Shiplu [Department of Renewable Energy, Faculty of Engineering and Science, University of Agder, Grimstad-4879 (Norway); Moeller, Henrik Bjarne [Department of Biosystems Engineering, Faculty of Science and Technology, Aarhus University, Research center Foulum, Blichers Alle, Post Box 50, Tjele-8830 (Denmark)

    2013-07-01

    Concentrated molasses (C5 molasses) from 2nd generation bioethanol plant has been investigated for enhancing productivity of manure based digesters. A batch study at mesophilic condition (35+- 1 deg C) showed the maximum methane yield from molasses as 286 LCH4/kgVS which was approximately 63% of the calculated theoretical yield. In addition to the batch study, co-digestion of molasses with cattle manure in a semi-continuously stirred reactor at thermophilic temperature (50+- 1 deg C) was also performed with a stepwise increase in molasses concentration. The results from this experiment revealed the maximum average biogas yield of 1.89 L/L/day when 23% VSmolasses was co-digested with cattle manure. However, digesters fed with more than 32% VSmolasses and with short adaptation period resulted in VFA accumulation and reduced methane productivity indicating that when using molasses as biogas booster this level should not be exceeded.

  9. Geodesign from Theory to Practice: From Metaplanning to 2nd Generation of Planning Support Systems

    Michele Campagna

    2014-05-01

    Full Text Available This paper deals with the concept of Geodesign, a new approach to spatial planning and design which is grounded on extensive use of Geographic Information Science methods and tools. As a method Geodesign is intended to inform projects since their conceptualization, to analysis and diagnosis, to design of alternatives and impact simulation, and eventually the final choice. This approach appears particularly urgent and actual to many scholars from academia and practitioners from the industry and the planning practice for advances in GIScience nowadays offer unprecedented data and tools to manage territorial knowledge for decision-making support. The author argues research in Geodesign may contribute to solve major actual pitfalls in sustainable spatial planning: namely it may offer methods to help planners to inform sustainable design alternatives with environmental considerations and contextually assess their impacts; secondly, it may help to ensure more transparent, responsible, and accountable democratic decision-making processes. The argumentation is supported by the author recent research results with regards to the evolution from 1st generation Planning Support Systems (PSS, to metaplanning and 2nd generation PSS.

  10. Synthesis Gas generation from Bio-Ethanol

    High-voltage discharge (called GlidArc) is used to assist the partial oxidation of 50 to 90 Ethanol/water solutions using air. The feed conversion is total and the produced synthesis gas does not contain soot, coke or tars. The output reformate gas reaches presently 22 kW power at only 1% of electric power necessary to assist such reforming process. Up to 46 vol.% of H2+CO SynGas mixture is produced (the balance being mostly the N2) in long runs. A 75% thermal efficiency of the process is obtained but a large part of remaining heat can be further reused. (authors)

  11. Synthesis Gas generation from Bio-Ethanol

    High-voltage discharge (called GlidArc) is used to assist the partial oxidation of 50 C to 90 C Ethanol/water solutions using air. The feed conversion is total and the produced synthesis gas does not contain soot, coke or tars. The output re-formate gas reaches presently 22 kW power at only 1% of electric power necessary to assist such reforming process. Up to 46 vol.% of H2+CO SynGas mixture is produced (the balance being mostly the N2) in long runs. A 75% thermal efficiency of the process is obtained but a large part of remaining heat can be further reused. (author)

  12. Improved beam spot measurements in the 2nd generation proton beam writing system

    Nanosized ion beams (especially proton and helium) play a pivotal role in the field of ion beam lithography and ion beam analysis. Proton beam writing has shown lithographic details down to the 20 nm level, limited by the proton beam spot size. Introducing a smaller spot size will allow smaller lithographic features. Smaller probe sizes, will also drastically improve the spatial resolution for ion beam analysis techniques. Among many other requirements, having an ideal resolution standard, used for beam focusing and a reliable focusing method, is an important pre-requisite for sub-10 nm beam spot focusing. In this paper we present the fabrication processes of a free-standing resolution standard with reduced side-wall projection and high side-wall verticality. The resulting grid is orthogonal (90.0° ± 0.1), has smooth edges with better than 6 nm side-wall projection. The new resolution standard has been used in focusing a 2 MeV H2+ beam in the 2nd generation PBW system at Center for Ion Beam Applications, NUS. The beam size has been characterized using on- and off-axis scanning transmission ion microscopy (STIM) and ion induced secondary electron detection, carried out with a newly installed micro channel plate electron detector. The latter has been shown to be a realistic alternative to STIM measurements, as the drawback of PIN diode detector damage is alleviated. With these improvements we show reproducible beam focusing down to 14 nm

  13. Conceptual design study of $Nb_{3} Sn$ low-beta quadrupoles for 2nd generation LHC IRs

    Zlobin, A V; Andreev, N; Barzi, E; Bauer, P; Chichili, D R; Huang, Y; Imbasciati, L; Kashikhin, V V; Lamm, M J; Limon, P; Novitski, I; Peterson, T; Strait, J B; Yadav, S; Yamada, R

    2003-01-01

    Conceptual designs of 90-mm aperture high-gradient quadrupoles based on the Nb/sub 3/Sn superconductor, are being developed at Fermilab for possible 2nd generation IRs with the similar optics as in the current low-beta insertions. Magnet designs and results of magnetic, mechanical, thermal and quench protection analysis for these magnets are presented and discussed. (10 refs).

  14. Environmental sustainability assessment of bio-ethanol production in Thailand

    Bio-ethanol is playing an important role in renewable energy for transport according to Thai government policy. This study aims to evaluate the energy efficiency and renewability of bio-ethanol system and identify the current significant environmental risks and availability of feedstocks in Thailand. Four of the seven existing ethanol plants contributing 53% of the total ethanol fuel production in Thailand have been assessed by the net energy balance method and Life Cycle Assessment (LCA). A renewability and net energy ratio portfolio has been used to indicate whether existing bio-ethanol production systems have net energy gain and could help reduce dependency on fossil energy. In addition, LCA has been conducted to identify and evaluate the environmental hotspots of 'cradle to gate' bio-ethanol production. The results show that there are significant differences of energy and environmental performance among the four existing production systems even for the same feedstock. The differences are dependent on many factors such as farming practices, feedstock transportion, fuel used in ethanol plants, operation practices and technology of ethanol conversion and waste management practices. Recommendations for improving the overall energy and environmental performance of the bio-ethanol system are suggested in order to direct the bio-ethanol industry in Thailand towards environmental sustainability.

  15. Biorefinery of corn cob for microbial lipid and bio-ethanol production: An environmental friendly process.

    Cai, Di; Dong, Zhongshi; Wang, Yong; Chen, Changjing; Li, Ping; Qin, Peiyong; Wang, Zheng; Tan, Tianwei

    2016-07-01

    Microbial lipid and bio-ethanol were co-generated by an integrated process using corn cob bagasse as raw material. After pretreatment, the acid hydrolysate was used as substrate for microbial lipid fermentation, while the solid residue was further enzymatic hydrolysis for bio-ethanol production. The effect of acid loading and pretreatment time on microbial lipid and ethanol production were evaluated. Under the optimized condition for ethanol production, ∼131.3g of ethanol and ∼11.5g of microbial lipid were co-generated from 1kg raw material. On this condition, ∼71.6% of the overall fermentable sugars in corn cob bagasse could be converted into valuable products. At the same time, at least 33% of the initial COD in the acid hydrolysate was depredated. PMID:27060242

  16. Multi-objective Optimization of a Solar Assisted 1st and 2nd Generation Sugarcane Ethanol Production Plant

    Zevenhoven, Ron; Wallerand, Anna Sophia; Queiroz Albarelli, Juliana; Viana Ensinas, Adriano; Ambrosetti, Gianluca; Mian, Alberto; Maréchal, François

    2014-01-01

    Ethanol production sites utilizing sugarcane as feedstock are usually located in regions with high land availability and decent solar radiation. This offers the opportunity to cover parts of the process energy demand with concentrated solar power (CSP) and thereby increase the fuel production and carbon conversion efficiency. A plant is examined that produces 1st and 2nd generation ethanol by fermentation of sugars (from sugarcane) and enzymatic hydrolysis of the lignocellulosic residues (bag...

  17. Optimization of upstream and development of cellulose hydrolysis process for cellulosic bio-ethanol production

    The purpose of this project is optimization of upstream and development of cellulose hydrolysis process for cellulosic bio-ethanol production. The 2nd year Research scope includes: 1) Optimization of pre-treatment conditions for enzymatic hydrolysis of lignocellulosic biomass and 2) Demonstration of enzymatic hydrolysis by recombinant enzymes. To optimize the pretreatment, we applied two processes: a wet process (wet milling + popping), and dry process (popping + dry milling). Out of these, the wet process presented the best glucose yield with a 93.1% conversion, while the dry process yielded 69.6%, and the unpretreated process yielded <20%. The recombinant cellulolytic enzymes showed very high specific activity, about 80-1000 times on CMC and 13-70 times on filter paper at pH 3.5 and 55 .deg. C

  18. BMI differences in 1st and 2nd generation immigrants of Asian and European origin to Australia.

    Hauck, Katharina; Hollingsworth, Bruce; Morgan, Lawrie

    2011-01-01

    We estimate assimilation of immigrants' body mass index (BMI) to the host population of Australia over one generation, conducting separate analyses for immigrants from 7 regions of Europe and Asia. We use quantile regressions to allow for differing impact of generational status across 19 quantiles of BMI from under-weight to morbidly obese individuals. We find that 1st generation South European immigrants have higher, and South and East Asian immigrants have lower BMI than Australians, but have assimilated to the BMI of their hosts in the 2nd generation. There are no or only small BMI differences between Australians and 1st and 2nd generation immigrants from East Europe, North-West Europe, Middle East and Pacific regions. We conclude that both upward and downward assimilation in some immigrant groups is most likely caused by factors which can change over one generation (such as acculturation), and not factors which would take longer to change (such as genetics). Our results suggest that public health policies targeting the lifestyles of well educated Asian immigrants may be effective in preventing BMI increase in this subgroup. PMID:20869292

  19. White paper on perspectives of biofuels in Denmark - with focus on 2nd generation bioethanol; Hvidbog om perspektiver for biobraendstoffer i Danmark - med fokus paa 2. generations bioethanol

    Larsen, Gy.; Foghmar, J.

    2009-11-15

    The white paper presents the perspectives - both options and barriers - for a Danish focus on production and use of biomass, including sustainable 2nd generation bioethanol, for transport. The white paper presents the current knowledge of biofuels and bioethanol and recommendations for a Danish strategy. (ln)

  20. Time resolved 2nd harmonic generation at LaAlO3/SrTiO3 Interfaces

    Adhikari, Sanjay; Eom, Chang-Beom; Ryu, Sangwoo; Cen, Cheng

    2014-03-01

    Ultrafast spectroscopy can produce information of carrier/lattice dynamics, which is especially valuable for understanding phase transitions at LaAlO3/SrTiO3 interfaces. LaAlO3 (LAO) and SrTiO3 (STO) are both associated with wide band gap, which allows deep penetration of commonly used laser wavelengths and therefore usually leads to overwhelming bulk signal background. Here we report a time resolved study of a 2nd harmonic generation (SHG) signal resulting from impulsive below-the-band-gap optical pumping. The nonlinear nature of the signal enables us to probe the interface directly. Output of a home built Ti:Sapphire laser and BBO crystal were used to generate 30fs pulses of two colors (405nm and 810nm). The 405nm pulse was used to pump the LAO/STO interfaces, while 2nd harmonics of the 810nm pulse generated at the interfaces was probed as a function of the time delay. Signals from samples with varying LAO thicknesses clearly correlates to the metal-insulator transition. Distinct time dependent signals were observed at LAO/STO interfaces grown on different substrates. Experiments performed at different optical polarization geometries, interface electric fields and temperatures allow us to paint a clearer picture of the novel oxide heterostructures under investigation.

  1. The water footprint of sweeteners and bio-ethanol

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.

    2012-01-01

    An increasing demand for food together with a growing demand for energy crops result in an increasing demand for and competition over water. Sugar cane, sugar beet and maize are not only essential food crops, but also important feedstock for bio-ethanol. Crop growth requires water, a scarce resource

  2. The water footprint of sweeteners and bio-ethanol.

    Gerbens-Leenes, Winnie; Hoekstra, Arjen Y

    2012-04-01

    An increasing demand for food together with a growing demand for energy crops result in an increasing demand for and competition over water. Sugar cane, sugar beet and maize are not only essential food crops, but also important feedstock for bio-ethanol. Crop growth requires water, a scarce resource. This study aims to assess the green, blue and grey water footprint (WF) of sweeteners and bio-ethanol from sugar cane, sugar beet and maize in the main producing countries. The WFs of sweeteners and bio-ethanol are mainly determined by the crop type that is used as a source and by agricultural practise and agro-climatic conditions; process water footprints are relatively small. The weighted global average WF of sugar cane is 209 m(3)/tonne; for sugar beet this is 133 m(3)/tonne and for maize 1222 m(3)/tonne. Large regional differences in WFs indicate that WFs of crops for sweeteners and bio-ethanol can be improved. It is more favourable to use maize as a feedstock for sweeteners or bio-ethanol than sugar beet or sugar cane. The WF of sugar cane contributes to water stress in the Indus and Ganges basins. In the Ukraine, the large grey WF of sugar beet contributes to water pollution. In some western European countries, blue WFs of sugar beet and maize need a large amount of available blue water for agriculture. The allocation of the limited global water resources to bio-energy on a large scale will be at the cost of water allocation to food and nature. PMID:21802146

  3. Clinical evaluation of the 2nd generation radio-receptor assay for anti-thyrotropin receptor antibodies (TRAb) in Graves' disease

    Full text: Detection of autoantibodies to the TSH receptor by radioreceptorial assays (RRA) is largely requested in clinical practice for the diagnosis of Graves' disease and its differentiation from diffuse thyroid autonomy. Additionally, TRAb measurement during antithyroid drug treatment can be useful to evaluate the risk of disease's relapse alter therapy discontinuation. Nevertheless, some patients affected by Graves' disease are TRAb negative when 1st generation assay is used. Recently a new RRA method for TRAb assay was developed by using human recombinant TSH-receptor and solid-phase technique. Aim of our work was the comparison between 1st and 2nd generation TRAb assays in Graves' disease patients and, particularly, the evaluation of 2nd generation test in a sub-group of patients affected by Graves' disease but with negative 1st generation TRAb assay. We evaluated the diagnostic performance of a newly developed 2nd generation TRAb assay (DYNOtest(r) TRAK human, BRAHMS Diagnostica GmbH, Germany) in 46 patients affected by Graves' disease with negative 1st generation TRAb assay (TRAK Assay(r), BRAHMS Diagnostica GmbH, Germany) . A control groups of 50 Graves' disease patients with positive 1st generation TRAb assay, 50 patients affected by Hashimoto's thyroiditis and 50 patients affected by nodular goiter were also examined. 41 out of 46 patients affected by Graves' disease with negative 1st generation TRAb assay showed a positive 2nd generation test. The overall sensitivity of the 2nd generation test was significantly improved respect the 1st generation assay in Graves' disease patients (χ2 = 22.5, p<0.0001). 1 and 3 out of 50 patients affected by Hashimoto's thyroiditis were positive by 1st and 2nd generation TRAB assay, respectively. All these patients showed primary hypothyroidism. No differences resulted in euthyroid Hashimoto's thyroiditis sub-group and in nodular goiter control group. The 2nd generation TRAB assay is clearly more sensitive than the 1

  4. Large-aperture $Nb_{3}Sn$ quadrupoles for $2^{nd}$ generation LHC IRs

    Zlobin, A V; Chichili, D R; Huang Yu; Kashikhin, V V; Lamm, M J; Limon, P J; Mokhov, N V; Novitski, I; Peterson, T; Strait, J B; Yadav, S

    2002-01-01

    The 1/sup st/ generation of low-beta quadrupoles for the LHC interaction region (IR) was designed to achieve the nominal LHC luminosity of 10/sup 34/ cm/sup -2/s/sup -1/. Given that the lifetime of the 1/sup st/ generation IR quadrupoles is limited by ionizing radiation to 6-7 years, the 2/sup nd/ generation of IR quadrupoles has to be developed with the goal to achieve the ultimate luminosity up to 10/sup 35/ cm/sup -2/s/sup -1/. The IR quadrupole parameters such as nominal gradient, dynamic aperture and physical aperture, operation margins are the main factors limiting the machine performance. Conceptual designs of 90-mm aperture high-gradient quadrupoles, suitable for use in 2/sup nd/ generation high-luminosity LHC IRs with the similar optics, are presented. The issues related to the field gradient, field quality and operation margins are discussed. (5 refs).

  5. Mobile Radio Communications: Second and Third Generation Cellular and WATM Systems: 2nd

    Steele, R; Hanzo, L

    1999-01-01

    This comprehensive all-in-one reference work covers the fundamental physical aspects of mobile communications and explains the latest techniques employed in second and third generation digital cellular mobile radio systems. Mobile radio communications technology has progressed rapidly and it is now capable of the transmission of voice, data and image signals. This new edition reflects the current state-of-the-art by featuring: * Expanded and updated sections on voice compression techniques, i...

  6. STARS 2.0: 2nd-generation open-source archiving and query software

    Winegar, Tom

    2008-07-01

    The Subaru Telescope is in process of developing an open-source alternative to the 1st-generation software and databases (STARS 1) used for archiving and query. For STARS 2, we have chosen PHP and Python for scripting and MySQL as the database software. We have collected feedback from staff and observers, and used this feedback to significantly improve the design and functionality of our future archiving and query software. Archiving - We identified two weaknesses in 1st-generation STARS archiving software: a complex and inflexible table structure and uncoordinated system administration for our business model: taking pictures from the summit and archiving them in both Hawaii and Japan. We adopted a simplified and normalized table structure with passive keyword collection, and we are designing an archive-to-archive file transfer system that automatically reports real-time status and error conditions and permits error recovery. Query - We identified several weaknesses in 1st-generation STARS query software: inflexible query tools, poor sharing of calibration data, and no automatic file transfer mechanisms to observers. We are developing improved query tools and sharing of calibration data, and multi-protocol unassisted file transfer mechanisms for observers. In the process, we have redefined a 'query': from an invisible search result that can only transfer once in-house right now, with little status and error reporting and no error recovery - to a stored search result that can be monitored, transferred to different locations with multiple protocols, reporting status and error conditions and permitting recovery from errors.

  7. Bellman's GAP : a 2nd generation language and system for algebraic dynamic programming

    Sauthoff, Georg

    2010-01-01

    The dissertation describes the new Bellman’s GAP which is a programming system for writing dynamic programming algorithms over sequential data. It is the second generation implementation of the algebraic dynamic programming framework (ADP). The system includes the multi-paradigm language (GAP-L), its compiler (GAP-C), functional modules (GAP-M) and a web site (GAP Pages) to experiment with GAP-L programs. GAP-L includes declarative constructs, e.g. tree grammars to model the search space, and...

  8. Next generation LP system for maintenance in nuclear power reactors (2nd report)

    Laser peening is a surface enhancement process that introduces compressive residual stress on materials by irradiating laser pulses under aqueous environment. The process utilizes the impulsive effect of high-pressure plasma generated by ablative interaction of each laser pulse. Around a decade ago, the authors invented a new process of laser peening (LP) without any surface preparation, while the conventional types required coating that prevented the surface from melting. Taking advantage of the new process without surface preparation, we have applied laser peening without coating to nuclear power plants as a preventive maintenance against stress corrosion cracking (SCC). Toshiba released the first LP system in 1999, which delivered laser pulses through waterproof pipes with mirrors. In 2002, fiber-delivery was attained and significantly extended the applicability. Now, the development of a new system has been just accomplished, which is extremely simple, reliable and easy-handled. (author)

  9. Cogeneration and production of 2nd generation bio fuels using biomass gasification; Cogeneracion y produccion de biocombustibles de 2 generacion mediante gasificacion de biomasa

    Uruena Leal, A.; Diez Rodriguez, D.; Antolin Giraldo, G.

    2011-07-01

    Thermochemical decomposition process of gasification, in which a carbonaceous fuel, under certain conditions of temperature and oxygen deficiency, results in a series of reactions that will produce a series of gaseous products is now widely used for high performance energetic and versatility of these gaseous products for energy and 2nd generation bio fuels and reduce the emission of greenhouse gases. (Author)

  10. Strategies for 2nd generation biofuels in EU - Co-firing to stimulate feedstock supply development and process integration to improve energy efficiency and economic competitiveness

    The present biofuel policies in the European Union primarily stimulate 1st generation biofuels that are produced based on conventional food crops. They may be a distraction from lignocellulose based 2nd generation biofuels - and also from biomass use for heat and electricity - by keeping farmers' attention and significant investments focusing on first generation biofuels and the cultivation of conventional food crops as feedstocks. This article presents two strategies that can contribute to the development of 2nd generation biofuels based on lignocellulosic feedstocks. The integration of gasification-based biofuel plants in district heating systems is one option for increasing the energy efficiency and improving the economic competitiveness of such biofuels. Another option, biomass co-firing with coal, generates high-efficiency biomass electricity and reduces CO2 emissions by replacing coal. It also offers a near-term market for lignocellulosic biomass, which can stimulate development of supply systems for biomass also suitable as feedstock for 2nd generation biofuels. Regardless of the long-term priorities of biomass use for energy, the stimulation of lignocellulosic biomass production by development of near term and cost-effective markets is judged to be a no-regrets strategy for Europe. Strategies that induce a relevant development and exploit existing energy infrastructures in order to reduce risk and reach lower costs, are proposed an attractive complement the present and prospective biofuel policies. (author)

  11. Strategies for 2nd generation biofuels in EU - Co-firing to stimulate feedstock supply development and process integration to improve energy efficiency and economic competitiveness

    The present biofuel policies in the European Union primarily stimulate 1st generation biofuels that are produced based on conventional food crops. They may be a distraction from lignocellulose based 2nd generation biofuels - and also from biomass use for heat and electricity - by keeping farmers' attention and significant investments focusing on first generation biofuels and the cultivation of conventional food crops as feedstocks. This article presents two strategies that can contribute to the development of 2nd generation biofuels based on lignocellulosic feedstocks. The integration of gasification-based biofuel plants in district heating systems is one option for increasing the energy efficiency and improving the economic competitiveness of such biofuels. Another option, biomass co-firing with coal, generates high-efficiency biomass electricity and reduces CO2 emissions by replacing coal. It also offers a near-term market for lignocellulosic biomass, which can stimulate development of supply systems for biomass also suitable as feedstock for 2nd generation biofuels. Regardless of the long-term priorities of biomass use for energy, the stimulation of lignocellulosic biomass production by development of near term and cost-effective markets is judged to be a no-regrets strategy for Europe. Strategies that induce a relevant development and exploit existing energy infrastructures in order to reduce risk and reach lower costs, are proposed an attractive complement the present and prospective biofuel policies.

  12. The Emergence and Challenging Growth of the Bio-Ethanol Innovation System in Taiwan (1949–2015)

    Chao-Chen Chung; Siang-Cing Yang

    2016-01-01

    This study explores the bio-ethanol innovation system in Taiwan from the perspective of a technology innovation system (TIS). Taiwan is a newly industrialized country and is not currently a main producer of bio-ethanol. This study analyzes the evolution of bio-ethanol innovation system in Taiwan and places a particular emphasis on challenges that present policies face in the context of potential long-term bio-ethanol development. Through an evaluation of the consistency of the present researc...

  13. Immobilized High Level Waste (HLW) Interim Storage Alternative Generation and analysis and Decision Report 2nd Generation Implementing Architecture

    CALMUS, R.B.

    2000-09-14

    Two alternative approaches were previously identified to provide second-generation interim storage of Immobilized High-Level Waste (IHLW). One approach was retrofit modification of the Fuel and Materials Examination Facility (FMEF) to accommodate IHLW. The results of the evaluation of the FMEF as the second-generation IHLW interim storage facility and subsequent decision process are provided in this document.

  14. Price determination for hydrogen produced from bio-ethanol in Argentina

    Gregorini, V.A.; Pasquevich, D. [Instituto de Energia y Desarrollo Sustentable - CNEA, Av. Del Libertador 8250, Buenos Aires (Argentina); Laborde, M. [Facultad de Ingenieria - Universidad de Buenos Aires, Ciudad Universitaria, Buenos Aires (Argentina)

    2010-06-15

    A massive penetration for hydrogen as a fuel vector requires a price reduction against fossil fuels (up to lower or at less equal to current prices). That is why it is important to calculate the current prices, so that we can determinate the gap between them and work in reducing them. In order to follow properly prices evolution it is necessary been able to compare data generated by Universities, Laboratories and Industries. So that, DOE creates in 2003 a tool (H2A) to determine prices for hydrogen, with some assumptions and pre defined values, to facilitate transparency and consistency of data. In this work we will use the H2A tool to calculate de price of hydrogen produced in a bio-ethanol semi-industrial Plant in Argentina, and we will compare it with the prices of USA studies. (author)

  15. Price determination for hydrogen produced from bio-ethanol in Argentina

    A massive penetration for hydrogen as a fuel vector requires a price reduction against fossil fuels (up to lower or at less equal to current prices). That is why it is important to calculate the current prices, so that we can determinate the gap between them and work in reducing them. In order to follow properly prices evolution it is necessary been able to compare data generated by Universities, Laboratories and Industries. So that, DOE creates in 2003 a tool (H2A) to determine prices for hydrogen, with some assumptions and pre defined values, to facilitate transparency and consistency of data. In this work we will use the H2A tool to calculate de price of hydrogen produced in a bio-ethanol semi-industrial Plant in Argentina, and we will compare it with the prices of USA studies. (author)

  16. Tax exemption for biofuels in Germany: Is bio-ethanol really an option for climate policy?

    Henke, Jan Michael; Klepper, Gernot; Schmitz, Norbert

    2003-01-01

    Last year the German Parliament exempted biofuels from the gasoline tax. The promotion of biofuels is being justified by allegedly positive effects on climate, energy, and agricultural policy goals. The paper takes a closer look at bio-ethanol as a substitute for gasoline. We analyze the basic conditions that provide the setting for the production and promotion of biofuels and show that the production of bio-ethanol in Germany is not competitive. Using energy and greenhouse gas balances we de...

  17. Study of bio-ethanol production from cellulosic waste (rice straw)

    Tadayosi, YOSHIMURA; Marie, HATAKAWA; Fumio, TAKAHASHI; Takatoshi, KAWASHIMA

    2012-01-01

    This basic research was carried out on bio-ethanol derived from cellulosic waste (rice straw). In view of the fact that rice straw is incorporated into the soil after harvesting the grains to increase mineral soil content, we examined the option of using high pressure pretreatment which does not involve chemical treatment, thus allowing residues from bio-ethanol production to be returned to the soil as a liquid fertilizer. Results from this study showed that i) high-pressure treatment enhance...

  18. Bio-Ethanol Production from Banana, Plantain and Pineapple Peels by Simultaneous Saccharification and Fermentation Process

    J. Itelima; F. Onwuliri; E. Onwuliri; Isaac Onyimba; S. Oforji

    2013-01-01

    Most nations, whether economically advanced or at different stages of development are faced with the problem of disposal and treatment of wastes. Wastes could be treated in several ways (e.g. by reducing its bulk or by recovering and reprocessing it into useful substance) to meet sanitary standards. Ethanol fermented from renewable sources for fuel or fuel additives are known as bio-ethanol. In Nigeria, many food crops have been specifically grown for the production of bio-ethanol. However, b...

  19. Recent trends in global production and utilization of bio-ethanol fuel

    Bio-fuels are important because they replace petroleum fuels. A number of environmental and economic benefits are claimed for bio-fuels. Bio-ethanol is by far the most widely used bio-fuel for transportation worldwide. Production of bio-ethanol from biomass is one way to reduce both consumption of crude oil and environmental pollution. Using bio-ethanol blended gasoline fuel for automobiles can significantly reduce petroleum use and exhaust greenhouse gas emission. Bio-ethanol can be produced from different kinds of raw materials. These raw materials are classified into three categories of agricultural raw materials: simple sugars, starch and lignocellulose. Bio-ethanol from sugar cane, produced under the proper conditions, is essentially a clean fuel and has several clear advantages over petroleum-derived gasoline in reducing greenhouse gas emissions and improving air quality in metropolitan areas. Conversion technologies for producing bio-ethanol from cellulosic biomass resources such as forest materials, agricultural residues and urban wastes are under development and have not yet been demonstrated commercially. (author)

  20. Experimental Investigation of 2nd Generation Bioethanol Derived from Empty-fruit-bunch (EFB) of Oil-palm on Performance and Exhaust Emission of SI Engine

    Yanuandri Putrasari; Haznan Abimanyu; Achmad Praptijanto; Arifin Nur; Yan Irawan; Sabar Pangihutan Simanungkalit

    2014-01-01

    The experimental investigation of 2nd generation bioethanol derived from EFB of oil-palm blended with gasoline for 10, 20, 25% by volume and pure gasoline were conducted on performance and exhaust emission tests of SI engine. A four stroke, four cylinders, programmed fuel injection (PGMFI), 16 valves variable valve timing and electronic lift control (VTEC), single overhead camshaft (SOHC), and 1,497 cm3 SI engine (Honda/L15A) was used in this investigation. Engine performance test was carried...

  1. The Emergence and Challenging Growth of the Bio-Ethanol Innovation System in Taiwan (1949–2015

    Chao-Chen Chung

    2016-02-01

    Full Text Available This study explores the bio-ethanol innovation system in Taiwan from the perspective of a technology innovation system (TIS. Taiwan is a newly industrialized country and is not currently a main producer of bio-ethanol. This study analyzes the evolution of bio-ethanol innovation system in Taiwan and places a particular emphasis on challenges that present policies face in the context of potential long-term bio-ethanol development. Through an evaluation of the consistency of the present research, technology, development and innovation (RTDI policies as well as the influence of these policies on the functional dynamics of bio-ethanol innovation system, mechanisms prohibiting the system from flourishing are determined. It is suggested that the production of bio-ethanol in Taiwan would be achieved if the government: (1 fixes long-term targets for both domestic bio-ethanol development and emission reduction; and (2 comprehensively designs a set of interrelated RTDI policies in accordance with the functional pattern of the bio-ethanol innovation system and consistently implements these policies. If such measures were implemented, it is considered that the bio-ethanol innovation system in Taiwan would flourish.

  2. Bio-ethanol Production from Wheat in the Winter Rainfall Region of South Africa: A Quantitative Risk Analysis

    Richardson, James W.; Lemmer, Wessel J.; Outlaw, Joe L.

    2007-01-01

    Contrary to developments in other parts of the world, South Africa has not developed a bio-ethanol industry. The objective was to quantify the risks and economic viability of a wheat based bio-ethanol plant in the winter rainfall region of South Africa. Monte Carlo simulation of a bio-ethanol plant was used to quantify the risk that investors will likely face. Under the Base scenario a 103 million liter bio-ethanol plant would not offer a reasonable chance of being economically viable. Altern...

  3. Security of feedstocks supply for future bio-ethanol production in Thailand

    This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. (author)

  4. Security of feedstocks supply for future bio-ethanol production in Thailand

    Silalertruksa, Thapat; Gheewala, Shabbir H. [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, 126 Prachauthit Road, Bangkok 10140 (Thailand)

    2010-11-15

    This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. (author)

  5. Study on bio-ethanol production from oil palm (Elaies Guineensis) trunks sap using factorial design

    Norhazimah, A. H.; Che Ku, M. Faizala [Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang (Malaysia)], email: amfaizal@ump.edu.my

    2011-07-01

    Oil palm (Elaies Guineensis) trunks (OPT), a waste generated from the re-plantation of oil palm trees for palm oil production, contain useful fermentable sugar for bio-ethanol production, and are a very important biomass material for future energy production. The fermentation usually can be affected along several parameters: temperature, pH, agitation rate, percentage inoculums, time of incubation, nitrogen sources, age of the inoculums and other chemical and physical factors. Since identifying all the effects of a particular factor on the fermentation process is impractical for reasons of time and cost, the approach of this study was based on a two-level five-factor (25) full factorial design (FFD) in order to identify the independent parameters for screening experiment purposes and determine the range of levels of the factor as well as the regions for optimization. The results from this study showed that the most influential principal factors affecting ethanol concentration and productivity were temperature, followed by initial pH and agitation rate.

  6. Conceptual Design of an Operator Training Simulator for a Bio-Ethanol Plant

    Inga Gerlach

    2015-09-01

    Full Text Available Conceptual design methodology for the configuration and procedural training with an operating training simulator (OTS in a large-scale plant for commercial bio-ethanol production is described. The aim of the study is to show how the methodology provides a powerful way for finding the best configuration and training structure of the OTS before constructing and implementing the software of the OTS. The OTS principle, i.e., to use a computer-based virtual representation of the real process plant intended for efficient training of process operators, has long since been applied in aviation and process industries for more efficient and flawless operations. By using the conceptual design methodology (sometimes referred to as bio-mechatronics a variety of OTS configurations with this capacity was generated. The systematic approach of for targeting the users’ (i.e., the plant management and process operators needs resulted in better understanding and efficiency in training of hands-on skills in operating the plant. The training included general standard operating procedures for running the plant under normal operation conditions with different starch materials, handling of typical frequent disturbances as well as acting in situations not described in the standard operation procedures and applying trouble-shooting.

  7. Stabilization of cereal markets by flexible use of cereals for bio-ethanol

    This report addresses the question if it is possible to stabilize the grain market and the grain price by means of variation in the deployment of grain for producing bio-ethanol in the Eu-27. The time horizon of this study is 2020, taking into account the blending obligation for biofuels of minimal 10% in the Eu-27. A basic scenarios and several alternative scenarios are developed by means of an economic calculation model. In the alternative scenarios more or less grain is used for own production of bio-ethanol in the Eu-27. The variation depends on the volume of the grain production compared to the basic scenario. The effect of the additional own production of bio-ethanol on the grain price is subsequently addressed.

  8. Anaerobic digestion in combination with 2nd generation ethanol production for maximizing biofuels yield from lignocellulosic biomass – testing in an integrated pilot-scale biorefinery plant

    Uellendahl, Hinrich; Ahring, Birgitte Kiær

    was higher for mesophilic than for thermophilic operation. The effluent from the ethanol fermentation showed no signs of toxicity to the anaerobic microorganisms. Implementation of the biogas production from the fermentation effluent accounted for about 30% higher biofuels yield in the biorefinery......An integrated biorefinery concept for 2nd generation bioethanol production together with biogas production from the fermentation effluent was tested in pilot-scale. The pilot plant comprised pretreatment, enzymatic hydrolysis, hexose and pentose fermentation into ethanol and anaerobic digestion of...... the fermentation effluent in a UASB (upflow anaerobic sludge blanket) reactor. Operation of the 770 liter UASB reactor was tested under both mesophilic (38ºC) and thermophilic (53ºC) conditions with increasing loading rates of the liquid fraction of the effluent from ethanol fermentation. At an OLR of...

  9. Methodology for measuring the impact of mobile technology change from 2nd to 3th generation percerved by users of smes in Barranquilla

    Jairo Polo

    2011-06-01

    Full Text Available This article presents the results of a research project undertaken to obtain a Masters inBusiness Administration from the Business School at the Universidad del Norte, whosepurpose was to identify and test a methodology to measure the impact exerted by thechange from 2nd to 3rd generation mobile tech, based on the perception of users belongingto Barranquilla SME, motivated by the influence of technological changes in behavior andthe knowledge creation among society members, and the importance it has taken to thesurvival of organizations the adoption of applications for process automation, web-basedapplications, voice, data and video that allow the development of competitive advantages,based on information and creativity for new and better products or services.

  10. Security of feedstocks supply for future bio-ethanol production in Thailand

    This study assesses the security of feedstock supply to satisfy the increased demand for bio-ethanol production based on the recent 15 years biofuels development plan and target (year 2008-2022) of the Thai government. Future bio-ethanol systems are modeled and the feedstock supply potentials analyzed based on three scenarios including low-, moderate- and high-yields improvement. The three scenarios are modeled and key dimensions including availability; diversity; and environmental acceptability of feedstocks supply in terms of GHG reduction are evaluated through indicators such as net feedstock balances, Shannon index and net life cycle GHG emissions. The results show that only the case of high yields improvement scenario can result in a reliable and sufficient supply of feedstocks to satisfy the long-term demands for bio-ethanol and other related industries. Cassava is identified as the critical feedstock and a reduction in cassava export is necessary. The study concludes that to enhance long-term security of feedstocks supply for sustainable bio-ethanol production in Thailand, increasing use of sugarcane juice as feedstock, improved yields of existing feedstocks and promoting production of bio-ethanol derived from agricultural residues are three key recommendations that need to be urgently implemented by the policy makers. - Research highlights: →Bioethanol in Thailand derived from molasses, cassava, sugarcane juice could yield reductions of 64%, 49% and 87% in GHGs when compared to conventional gasoline. →High yields improvement are required for a reliable and sufficient supply of molasses, cassava and sugarcane to satisfy the long-term demands for bio-ethanol and other related industries. →Other factors to enhance long-term security of feedstocks supply for sustainable bioethanol production in Thailand include increasing use of sugarcane juice as feedstock and promoting production of bioethanol derived from agricultural residues.

  11. Efficient 2(nd) and 4(th) harmonic generation of a single-frequency, continuous-wave fiber amplifier.

    Sudmeyer, Thomas; Imai, Yutaka; Masuda, Hisashi; Eguchi, Naoya; Saito, Masaki; Kubota, Shigeo

    2008-02-01

    We demonstrate efficient cavity-enhanced second and fourth harmonic generation of an air-cooled, continuous-wave (cw), single-frequency 1064 nm fiber-amplifier system. The second harmonic generator achieves up to 88% total external conversion efficiency, generating more than 20-W power at 532 nm wavelength in a diffraction-limited beam (M(2) crystal operated at 25 degrees C. The fourth harmonic generator is based on an AR-coated, Czochralski-grown beta-BaB(2)O(4) (BBO) crystal optimized for low loss and high damage threshold. Up to 12.2 W of 266-nm deep-UV (DUV) output is obtained using a 6-mm long critically phase-matched BBO operated at 40 degrees C. This power level is more than two times higher than previously reported for cw 266-nm generation. The total external conversion efficiency from the fundamental at 1064 nm to the fourth harmonic at 266 nm is >50%. PMID:18542230

  12. Lignocellulosic ethanol in Brazil : technical assessment of 1st and 2nd generation sugarcane ethanol in a Brazilian setting

    Stojanovic, M.; Bakker, R.R.C.

    2009-01-01

    Brazil is currently the largest ethanol-biofuel producer worldwide. Ethanol is produced by fermenting the sucrose part of the sugarcane that contains only one third of the sugarcane energy. The rest of the plant is burned to produce energy to run the process and to generate electricity that is sold

  13. Lignocellulosic ethanol in Brazil : technical assessment of 1st and 2nd generation sugarcane ethanol in a Brazilian setting

    Stojanovic, M.; Bakker, R.R.C.

    2009-01-01

    Brazil is currently the largest ethanol-biofuel producer worldwide. Ethanol is produced by fermenting the sucrose part of the sugarcane that contains only one third of the sugarcane energy. The rest of the plant is burned to produce energy to run the process and to generate electricity that is sold to the public grid, making the process a net energy producer. This paper evaluates current technology from an energy efficiency point of view and quantifies additional benefits from extra energy ge...

  14. Advances with the new AIMS fab 193 2nd generation: a system for the 65 nm node including immersion

    Zibold, Axel M.; Poortinga, E.; Doornmalen, H. v.; Schmid, R.; Scherubl, T.; Harnisch, W.

    2005-06-01

    The Aerial Image Measurement System, AIMS, for 193nm lithography emulation is established as a standard for the rapid prediction of wafer printability for critical structures including dense patterns and defects or repairs on masks. The main benefit of AIMS is to save expensive image qualification consisting of test wafer exposures followed by wafer CD-SEM resist or wafer analysis. By adjustment of numerical aperture (NA), illumination type and partial coherence (σ) to match any given stepper/ scanner, AIMS predicts the printability of 193nm reticles such as binary with, or without OPC and phase shifting. A new AIMS fab 193 second generation system with a maximum NA of 0.93 is now available. Improvements in field uniformity, stability over time, measurement automation and higher throughput meet the challenging requirements of the 65nm node. A new function, "Global CD Map" can be applied to automatically measure and analyse the global CD uniformity of repeating structures across a reticle. With the options of extended depth-of-focus (EDOF) software and the upcoming linear polarisation capability in the illumination the new AIMS fab 193 second generation system is able to cover both dry and immersion requirements for NA performed to study the effects of polarisation for imaging by comparing the aerial image of the AIMS to the resist image of the scanner.

  15. Advances with the new AIMS fab 193 2nd generation: a system for the 65 nm node including immersion

    Zibold, Axel M.; Poortinga, E.; Doornmalen, H. v.; Schmid, R.; Scherubl, T.; Harnisch, W.

    2005-06-01

    The Aerial Image Measurement System, AIMS, for 193nm lithography emulation is established as a standard for the rapid prediction of wafer printability for critical structures including dense patterns and defects or repairs on masks. The main benefit of AIMS is to save expensive image qualification consisting of test wafer exposures followed by wafer CD-SEM resist or wafer analysis. By adjustment of numerical aperture (NA), illumination type and partial coherence (σ) to match any given stepper/ scanner, AIMS predicts the printability of 193nm reticles such as binary with, or without OPC and phase shifting. A new AIMS fab 193 second generation system with a maximum NA of 0.93 is now available. Improvements in field uniformity, stability over time, measurement automation and higher throughput meet the challenging requirements of the 65nm node. A new function, "Global CD Map" can be applied to automatically measure and analyse the global CD uniformity of repeating structures across a reticle. With the options of extended depth-of-focus (EDOF) software and the upcoming linear polarisation capability in the illumination the new AIMS fab 193 second generation system is able to cover both dry and immersion requirements for NA < 1. Rigorous simulations have been performed to study the effects of polarisation for imaging by comparing the aerial image of the AIMS to the resist image of the scanner.

  16. Bitter sweet : How sustainable is bio-ethanol production in Brazil?

    Azadi, Hossein; de Jong, Sanne; Derudder, Ben; De Maeyer, Philippe; Witlox, Frank

    2012-01-01

    While biofuels have currently been regarded as a good alternative for fossil fuels, there remain many debates on their impacts on human and environment. This paper tried to shed light on bio-ethanol in Brazil as one of the main producers and exporters in the world. The main question was to understan

  17. Promoting Bio-Ethanol in the United States by Incorporating Lessons from Brazil's National Alcohol Program

    Du, Yangbo

    2007-01-01

    Current U.S. energy policy supports increasing the use of bio-ethanol as a gasoline substitute, which Brazil first produced on a large scale in response to the 1970s energy crises. Brazil's National Alcohol Program stood out among its contemporaries regarding its success at displacing a third of Brazil's gasoline requirements, primarily due to…

  18. Evaluation of the parameters effects on the bio-ethanol production process from Ricotta Cheese Whey

    Sansonetti, Sascha; Curcio, Stefano; Calabrò, Vincenza;

    2010-01-01

    The work consists of an experimental analysis to evaluate the effects of the variables temperature (T), pH, agitation rate (K) and initial lactose concentration (L) on the batch fermentation process of Ricotta Cheese Whey (RCW) into bio-ethanol by using the yeast Kluyveromyces marxianus. A central...

  19. BIO-ETHANOL FUELS: SHORT-TERM SOLUTIONS, LONG-TERM DISASTERS

    Ethanol derived from bio-mass is often advocated as a significant contributor to possible solutions to our need for a sustainable transportation fuel. Substituting bio-ethanol for conventional fuel immediately addresses the issue of reducing our use of non-renewable resources (f...

  20. Modeling Separation Dynamics in a Multi-Tray Bio-Ethanol Distillation Column

    Løhndorf, Petar Durdevic; Pedersen, Simon; Yang, Zhenyu

    2015-01-01

    product quality and energy consumption in a typical bio-ethanol distillation column is proposed in this paper. The proposed model is derived based on mass and energy balance principles, with an empirical model of the evaporation dynamics of liquids on column trays. The model parameters are identified...

  1. The water footprint of sweeteners and bio-ethanol from sugar cane, sugar beet and maize

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.

    2009-01-01

    Sugar cane and sugar beet are used for sugar for human consumption. In the US, maize is used, amongst others, for the sweetener High Fructose Maize Syrup (HFMS). Sugar cane, sugar beet and maize are also important for bio-ethanol production. The growth of crops requires water, a scarce resource. The

  2. FT-IR Investigation of Hoveyda-Grubbs'2nd Generation Catalyst in Self-Healing Epoxy Mixtures

    The development of smart composites capable of self-repair on aeronautical structures is still at the planning stage owing to complex issues to overcome. A very important issue to solve concerns the components' stability of the proposed composites which are compromised at the cure temperatures necessary for good performance of the composite. In this work we analyzed the possibility to apply Hoveyda Grubbs' second generation catalyst (HG2) to develop self-healing systems. Our experimental results have shown critical issues in the use of epoxy precursors in conjunction with Hoveyda-Grubbs II metathesis catalyst. However, an appropriate curing cycle of the self-healing mixture permits to overcome the critical issues making possible high temperatures for the curing process without deactivating self-repair activity.

  3. Contribution of ion beam analysis methods to the development of 2nd generation high temperature superconducting (HTS) wires

    Usov, Igor O [Los Alamos National Laboratory; Arendt, Paul N [Los Alamos National Laboratory; Stan, Liliana [Los Alamos National Laboratory; Holesinger, Terry G [Los Alamos National Laboratory; Foltyn, Steven R [Los Alamos National Laboratory; Depaula, Raymond F [Los Alamos National Laboratory

    2009-01-01

    One of the crucial steps in the second generation high temperature superconducting wire program was development of the buffer layer architecture. The architecture designed at the Superconductivity Technology Center at Los Alamos National Laboratory consists of several oxide layers wherein each layer plays a specific role, namely: nucleation layer, diffusion barrier, biaxially textured template, and an intermediate layer with a good match to the lattice parameter of superconducting Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7} (YBCO) compound. This report demonstrates how a wide range of ion beam analysis techniques (SIMS, RBS, channeling, PIXE, PIGE, NRA, ERD) was employed for analysis of each buffer layer and the YBCO films. These results assisted in understanding of a variety of physical processes occurring during the buffet layer fabrication and helped to optimize the buffer layer architecture as a whole.

  4. Control system for the 2nd generation Berkeley automounters (BAM2) at GM/CA-CAT macromolecular crystallography beamlines

    GM/CA-CAT at Sector 23 of the Advanced Photon Source (APS) is an NIH funded facility for crystallographic structure determination of biological macromolecules by X-ray diffraction. A second-generation Berkeley automounter is being integrated into the beamline control system at the 23BM experimental station. This new device replaces the previous all-pneumatic gripper motions with a combination of pneumatics and XYZ motorized linear stages. The latter adds a higher degree of flexibility to the robot including auto-alignment capability, accommodation of a larger capacity sample Dewar of arbitrary shape, and support for advanced operations such as crystal washing, while preserving the overall simplicity and efficiency of the Berkeley automounter design.

  5. New approaches for improving the production of the 1st and 2nd generation ethanol by yeast.

    Kurylenko, Olena; Semkiv, Marta; Ruchala, Justyna; Hryniv, Orest; Kshanovska, Barbara; Abbas, Charles; Dmytruk, Kostyantyn; Sibirny, Andriy

    2016-01-01

    Increase in the production of 1st generation ethanol from glucose is possible by the reduction in the production of ethanol co-products, especially biomass. We have developed a method to reduce biomass accumulation of Saccharomyces cerevisiae by the manipulation of the intracellular ATP level due to overexpression of genes of alkaline phosphatase, apyrase or enzymes involved in futile cycles. The strains constructed accumulated up to 10% more ethanol on a cornmeal hydrolysate medium. Similar increase in ethanol accumulation was observed in the mutants resistant to the toxic inhibitors of glycolysis like 3-bromopyruvate and others. Substantial increase in fuel ethanol production will be obtained by the development of new strains of yeasts that ferment sugars of the abundant lignocellulosic feedstocks, especially xylose, a pentose sugar. We have found that xylose can be fermented under elevated temperatures by the thermotolerant yeast, Hansenula polymorpha. We combined protein engineering of the gene coding for xylose reductase (XYL1) along with overexpression of the other two genes responsible for xylose metabolism in yeast (XYL2, XYL3) and the deletion of the global transcriptional activator CAT8, with the selection of mutants defective in utilizing ethanol as a carbon source using the anticancer drug, 3-bromopyruvate. Resulted strains accumulated 20-25 times more ethanol from xylose at the elevated temperature of 45°C with up to 12.5 g L(-1) produced. Increase in ethanol yield and productivity from xylose was also achieved by overexpression of genes coding for the peroxisomal enzymes: transketolase (DAS1) and transaldolase (TAL2), and deletion of the ATG13 gene. PMID:26619255

  6. Experimental Investigation of 2nd Generation Bioethanol Derived from Empty-fruit-bunch (EFB of Oil-palm on Performance and Exhaust Emission of SI Engine

    Yanuandri Putrasari

    2014-07-01

    Full Text Available The experimental investigation of 2nd generation bioethanol derived from EFB of oil-palm blended with gasoline for 10, 20, 25% by volume and pure gasoline were conducted on performance and exhaust emission tests of SI engine. A four stroke, four cylinders, programmed fuel injection (PGMFI, 16 valves variable valve timing and electronic lift control (VTEC, single overhead camshaft (SOHC, and 1,497 cm3 SI engine (Honda/L15A was used in this investigation. Engine performance test was carried out for brake torque, power, and fuel consumption. The exhaust emission was analyzed for carbon monoxide (CO and hydrocarbon (HC. The engine was operated on speed range from1,500 until 4,500 rev/min with 85% throttle opening position. The results showed that the highest brake torque of bioethanol blends achieved by 10% bioethanol content at 3,000 to 4,500 rpm, the brake power was greater than pure gasoline at 3,500 to 4,500 rpm for 10% bioethanol, and bioethanol-gasoline blends of 10 and 20% resulted greater bsfc than pure gasoline at low speed from 1,500 to 3,500 rpm. The trend of CO and HC emissions tended to decrease when the engine speed increased.

  7. The Role of Systems Modeling for Sustainable Development Policy Analysis: the Case of Bio-Ethanol

    Albert W. Chan

    2004-12-01

    Full Text Available A dynamic systems modeling technique has been developed to assess technologies according to the criterion of sustainability. In a case study, the potential contribution of bio-ethanol toward achieving Canada’s commitment to the Kyoto targets for greenhouse gas reductions is analyzed. The analysis concludes that, although bio-ethanol may help reduce greenhouse gas emissions, the technology by itself is insufficient to meet the Kyoto target. Applying the systems modeling approach to analyze sustainability helps highlight those policy issues that warrant more in-depth study. Although the systems model may not provide definitive answers, it raises relevant questions about physical constraints that might be encountered and estimates the extent to which sustainability targets may be met under various scenarios.

  8. Performance Assessment of SOFC Systems Integrated with Bio-Ethanol Production and Purification Processes

    Sumittra Charojrochkul

    2010-03-01

    Full Text Available The overall electrical efficiencies of the integrated systems of solid oxide fuel cell (SOFC and bio-ethanol production with purification processes at different heat integration levels were investigated. The simulation studies were based on the condition with zero net energy. It was found that the most suitable operating voltage is between 0.7 and 0.85 V and the operating temperature is in the range from 973 to 1173 K. For the effect of percent ethanol recovery, the optimum percent ethanol recovery is at 95%. The most efficient case is the system with full heat integration between SOFC and bio-ethanol production and purification processes with biogas reformed for producing extra hydrogen feed for SOFC which has the overall electrical efficiency = 36.17%. However more equipment such as reformer and heat exchangers are required and this leads to increased investment cost.

  9. Enhanced Bio-Ethanol Production from Industrial Potato Waste by Statistical Medium Optimization

    Gulten Izmirlioglu; Ali Demirci

    2015-01-01

    Industrial wastes are of great interest as a substrate in production of value-added products to reduce cost, while managing the waste economically and environmentally. Bio-ethanol production from industrial wastes has gained attention because of its abundance, availability, and rich carbon and nitrogen content. In this study, industrial potato waste was used as a carbon source and a medium was optimized for ethanol production by using statistical designs. The effect of various medium componen...

  10. Sweet sorghum - a potential alternate raw material for bio-ethanol and bio-energy

    Belum VS Reddy; Ramesh, S; P Sanjana Reddy; B Ramaiah; PM Salimath; Rajashekar Kachapur

    2005-01-01

    This paper focuses on the potential of sweet sorghum (Sorghum bicolor) as an alternate raw material for bio-ethanol and bio-energy production, highlighting its advantages (in terms of cost of cultivation, cost of ethanol production, and ethanol productivity) over sugarcane molasses. Prospects of enhancing the genetic potential of sweet sorghum through various plant breeding strategies are discussed. The status of national research programmes and public and private sector collaborations aimed ...

  11. Sugar palm (Argena pinnata). Potential of sugar palm for bio-ethanol production

    Elbersen, H.W.; Oyen, L.P.A.

    2010-01-01

    The energetic and economic feasibility of bioethanol production from sugar palm is virtually unknown. A positive factor are the potentially very high yields while the long non-productive juvenile phase and the high labor needs can be seen as problematic. Expansion to large scale sugar palm cultivation comes with risks. Small-scale cultivation of sugar palm perfectly fits into local farming systems. In order to make a proper assessment of the value palm sugar as bio-ethanol crop more informati...

  12. Bio-ethanol Production from Green Onion by Yeast in Repeated Batch

    Robati, Reza

    2013-01-01

    Considered to be the cleanest liquid fuel, bio-ethanol can be a reliable alternative to fossil fuels. It is produced by fermentation of sugar components of plant materials. The common onions are considered to be a favorable source of fermentation products as they have high sugar contents as well as contain various nutrients. This study focused on the effective production of ethanol from Green onion (Allium fistulosum L.) by the yeast “Saccharomyces cerevisiae” in repeated batch. The results s...

  13. Conceptual Design of an Operator Training Simulator for a Bio-Ethanol Plant

    Inga Gerlach; Volker C. Hass; Carl-Fredrik Mandenius

    2015-01-01

    Conceptual design methodology for the configuration and procedural training with an operating training simulator (OTS) in a large-scale plant for commercial bio-ethanol production is described. The aim of the study is to show how the methodology provides a powerful way for finding the best configuration and training structure of the OTS before constructing and implementing the software of the OTS. The OTS principle, i.e., to use a computer-based virtual representation of the real process plan...

  14. Robust industrial Saccharomyces cerevisiae strains for very high gravity bio-ethanol fermentations

    Pereira, Francisco B.; Guimarães, Pedro M. R.; Teixeira, J.A.; Domingues, Lucília

    2011-01-01

    The application and physiological background of two industrial Saccharomyces cerevisiae strains, isolated from harsh industrial environments, were studied in Very High Gravity (VHG) bio-ethanol fermentations. VHG laboratory fermentations, mimicking industrially relevant conditions, were performed with PE-2 and CA1185 industrial strains and the CEN.PK113-7D laboratory strain. The industrial isolates produced remarkable high ethanol titres (>19%, v/v) and accumulated an increased content of ste...

  15. Emerging bio-ethanol projects in Nigeria. Their opportunities and challenges

    Despite being a major petroleum producing and exporting country, Nigeria has for a long time imported refined petroleum products for domestic consumption. The country has recently made an entrance into the bio-energy sector by seeding the market with imported ethanol until enough capability exists for the domestic production of ethanol. The Nigerian Biofuel Policy was released in 2007 calling for the domestic production of bio-ethanol to meet the national demand of 5.14 billion litres/year. Some investors have responded by investing over $3.86 billion for the construction of 19 ethanol bio-refineries, 10,000 units of mini-refineries and feedstock plantations for the production of over 2.66 billion litres of fuel grade ethanol per annum. Also, another 14 new projects are in the offing. Of the 20 pioneer projects, 4 are at the conception phase, 8 are in the planning phase, and 7 are under construction with only 1 operational. The potential benefits of the emerging bio-ethanol projects include investment in the economy, employment, energy security and boost rural infrastructure, while the major challenge is land take (859,561 ha). This is the first time an attempt is been made to document the emerging bio-ethanol projects in Nigeria. (author)

  16. Emerging bio-ethanol projects in Nigeria: Their opportunities and challenges

    Despite being a major petroleum producing and exporting country, Nigeria has for a long time imported refined petroleum products for domestic consumption. The country has recently made an entrance into the bio-energy sector by seeding the market with imported ethanol until enough capability exists for the domestic production of ethanol. The Nigerian Biofuel Policy was released in 2007 calling for the domestic production of bio-ethanol to meet the national demand of 5.14 billion litres/year. Some investors have responded by investing over $3.86 billion for the construction of 19 ethanol bio-refineries, 10,000 units of mini-refineries and feedstock plantations for the production of over 2.66 billion litres of fuel grade ethanol per annum. Also, another 14 new projects are in the offing. Of the 20 pioneer projects, 4 are at the conception phase, 8 are in the planning phase, and 7 are under construction with only 1 operational. The potential benefits of the emerging bio-ethanol projects include investment in the economy, employment, energy security and boost rural infrastructure, while the major challenge is land take (859,561 ha). This is the first time an attempt is been made to document the emerging bio-ethanol projects in Nigeria.

  17. Emerging bio-ethanol projects in Nigeria. Their opportunities and challenges

    Ohimain, Elijah I. [Department of Natural Resources and Environmental Design, School of Agriculture and Environmental Sciences, North Carolina A and T State University, 1601 E. Market St., Greensboro, NC 27411 (United States)

    2010-11-15

    Despite being a major petroleum producing and exporting country, Nigeria has for a long time imported refined petroleum products for domestic consumption. The country has recently made an entrance into the bio-energy sector by seeding the market with imported ethanol until enough capability exists for the domestic production of ethanol. The Nigerian Biofuel Policy was released in 2007 calling for the domestic production of bio-ethanol to meet the national demand of 5.14 billion litres/year. Some investors have responded by investing over $3.86 billion for the construction of 19 ethanol bio-refineries, 10,000 units of mini-refineries and feedstock plantations for the production of over 2.66 billion litres of fuel grade ethanol per annum. Also, another 14 new projects are in the offing. Of the 20 pioneer projects, 4 are at the conception phase, 8 are in the planning phase, and 7 are under construction with only 1 operational. The potential benefits of the emerging bio-ethanol projects include investment in the economy, employment, energy security and boost rural infrastructure, while the major challenge is land take (859,561 ha). This is the first time an attempt is been made to document the emerging bio-ethanol projects in Nigeria. (author)

  18. Bio-ethanol: from the Brazilian experience to the formation of a global market

    Almost a century of regular use as a car fuel and a few decades of significant technical progress have now made sugar cane bio ethanol a viable option to replace efficiently fossil fuels. This article sets out the main steps of the development of Brazil's bio ethanol industry as well as the growth of demand, while underlining the role of public policies that have been gradually introduced to help reach economic competitiveness, at the same time favouring sustainable development. Currently, 33 million cars made locally or imported into Brazil run on pure bio ethanol, or mixed with gasoline (E25) and a significant part of Brazil's electricity is produced by cogeneration systems that use sugar cane bagasse. This positive experience stands a good chance of spreading, thus extending the contribution of renewable energies to meeting global energy demand. This, on condition that a global bio fuel market emerges, stimulating trade between producing countries, located in the humid tropics, and consumer countries, which have a sufficient number of suitably adapted vehicles in use, with environmental, economic and social benefits for all concerned and for the planet. (authors)

  19. Tax exemption for bio fuels in Germany: is bio-ethanol really an option for climate policy?

    In 2002 the German Parliament decided to exempt biofuels from the gasoline tax to increase their competitiveness compared to conventional gasoline. The policy to promote biofuels is being justified by their allegedly positive effects on climate, energy, and agricultural policy goals. An increased use of biofuels would contribute to sustainable development by reducing greenhouse-gas emissions and the use of non-renewable resources. The paper takes a closer look at bio-ethanol as a substitute for gasoline. It analyzes the underlying basic German, European, and worldwide conditions that provide the setting for the production and promotion of biofuels. It is shown that the production of bio-ethanol in Germany is not competitive and that imports are likely to increase. Using energy and greenhouse-gas balances we then demonstrate that the promotion and a possible increased use of bio-ethanol to reduce greenhouse-gas emissions are economically inefficient and that there are preferred alternative strategies. In addition, scenarios of the future development of the bio-ethanol market are derived from a model that allows for variations in all decisive variables and reflects the entire production and trade chain of bio-ethanol, from the agricultural production of wheat and sugar beet to the consumption of bio-ethanol in the fuel sector. (author)

  20. Quantification of left and right ventricular function and myocardial mass: Comparison of low-radiation dose 2nd generation dual-source CT and cardiac MRI

    Objective: To prospectively evaluate the accuracy of left and right ventricular function and myocardial mass measurements based on a dual-step, low radiation dose protocol with prospectively ECG-triggered 2nd generation dual-source CT (DSCT), using cardiac MRI (cMRI) as the reference standard. Materials and methods: Twenty patients underwent 1.5 T cMRI and prospectively ECG-triggered dual-step pulsing cardiac DSCT. This image acquisition mode performs low-radiation (20% tube current) imaging over the majority of the cardiac cycle and applies full radiation only during a single adjustable phase. Full-radiation-phase images were used to assess cardiac morphology, while low-radiation-phase images were used to measure left and right ventricular function and mass. Quantitative CT measurements based on contiguous multiphase short-axis reconstructions from the axial CT data were compared with short-axis SSFP cardiac cine MRI. Contours were manually traced around the ventricular borders for calculation of left and right ventricular end-diastolic volume, end-systolic volume, stroke volume, ejection fraction and myocardial mass for both modalities. Statistical methods included independent t-tests, the Mann–Whitney U test, Pearson correlation statistics, and Bland–Altman analysis. Results: All CT measurements of left and right ventricular function and mass correlated well with those from cMRI: for left/right end-diastolic volume r = 0.885/0.801, left/right end-systolic volume r = 0.947/0.879, left/right stroke volume r = 0.620/0.697, left/right ejection fraction r = 0.869/0.751, and left/right myocardial mass r = 0.959/0.702. Mean radiation dose was 6.2 ± 1.8 mSv. Conclusions: Prospectively ECG-triggered, dual-step pulsing cardiac DSCT accurately quantifies left and right ventricular function and myocardial mass in comparison with cMRI with substantially lower radiation exposure than reported for traditional retrospective ECG-gating.

  1. Selection of Saccharomyces cerevisiae strains for efficient very high gravity bio-ethanol fermentation processes

    Pereira, Francisco B; Guimarães, Pedro M. R.; J. A. Teixeira; Domingues, Lucília

    2010-01-01

    Abstract An optimized very high gravity (VHG) glucose medium supplemented with low cost nutrient sources was used to evaluate bio-ethanol production by 11 Saccharomyces cerevisiae strains. The industrial strains PE-2 and CA1185 exhibited the best overall fermentation performance, producing an ethanol titre of 19.2% (v/v) corresponding to a batch productivity of 2.5 g l?1 h?1, while the best laboratory strain (CEN.PK 113-7D) produced 17.5% (v/v) ethanol with a productivity of 1.7 g ...

  2. Effect of aeration and dilution on continuous bio ethanol production in a packed-bed bioreactor by Saccharomyces cerevisiae

    Stability of cell growth was achieved continuously at a steady state in a packed-bed bioreactor. The highest productivity of ethanol was achieved (0.02 g/ L/ h) when 0.003 vvm was employed. The productivity of bio ethanol increases when dilution rate increases. The highest production of 0.037 g/ L/ h was recorded when the dilution rate (D) was at 0.05 per hour. The production of bio ethanol was successfully maintained in a non 100 b % anaerobic condition. The best aeration for the continuous production of bio ethanol in a condition of steady state growth was at an aeration rate of 0.003 vvm. (author)

  3. Study of Application of Vinasse from Bio-ethanol Production to Farmland

    Chen, Yan; Shinogi, Yoshiyuki

    During bio-ethanol production from sugarcane molasses, large amounts of vinasse, which is strongly acidic with high COD and BOD, is produced as a by-product. Disposal of vinasse is one restrictive problem for sustainable bio-ethanol production. In this study, possible application of vinasse to farmland was investigated. First, the staple characteristics of vinasse were determined. Second, availability of nutrients such as nitrogen and potassium to crops and dynamics in the soil environment were studied in the laboratory, and crop growth experiments were carried out in the field. Farmland application of vinasse as a substitute for one third of the potassium showed no significant damage to the growth of red-radishes and tomatoes. When large amounts of vinasse are applied to farmland as a substitution for the nitrogen in traditional chemical fertilizers, nitrogen-hunger especially immediately after application is expected. In addition, it is necessary to take into consideration the leaching of ions and the dark material in the vinasse for proper timing of application and soil conditions.

  4. Fuel bio ethanol production from experimental crops of sugar cane, sweet sorghum and sugar beet in Uruguay

    This article is about the fuel bio ethanol production. Its requires the use of raw materials, process, integration with food producing chains, and social inclusion. Agricultural and fermentability assays of three sugar crops were performed: sugar beet, sugar cane and sweet sorghum grown in fields of small producers .

  5. 2nd Tourism Postdisciplinarity Conference

    2016-01-01

    Following the noted success of the 1st international conference on postdisciplinary approaches to tourism studies (held in Neuchatel, Switzerland, 19-22 June, 2013), we are happy to welcome you to the 2nd Tourism Postdisciplinarity Conference. Postdisciplinarity surpasses the boundaries of disciplinary thinking and opens up the possibility to question the established phenomena – touristic or otherwise – we take for granted. It does not claim that disciplinarity is essentially wrong, but it...

  6. The role of bio-ethanol in aqueous phase reforming to sustainable hydrogen

    Tokarev, A.V.; Murzina, E.V.; Eraenen, K.; Murzin, D.Yu. [Aabo Akademi University, Industrial Chemistry and Reaction Engineering, Process Chemistry Centre, Biskopsgatan 8, FIN-20500 Turku/Aabo (Finland); Kirilin, A.V. [Aabo Akademi University, Industrial Chemistry and Reaction Engineering, Process Chemistry Centre, Biskopsgatan 8, FIN-20500 Turku/Aabo (Finland); Zelinsky Institute of Organic Chemistry, Moscow (Russian Federation); Kustov, L.M. [Zelinsky Institute of Organic Chemistry, Moscow (Russian Federation); Mikkola, J.-P. [Aabo Akademi University, Industrial Chemistry and Reaction Engineering, Process Chemistry Centre, Biskopsgatan 8, FIN-20500 Turku/Aabo (Finland); Umeaa University, Technical Chemistry Department of Chemistry, Chemical-Biological Centre, Umeaa (Sweden)

    2010-11-15

    Aqueous Phase Reforming (APR) has during the recent years emerged as a potent, alternative means of processing raw materials of biological origin to component suitable as chemicals and fuel components. In contrary to e.g. steam reforming, aqueous phase reforming bares the promise of lower temperatures in processing which gives rise to potential of reduced energy consumption in the upgrading process itself. Aqueous phase reforming was studied over Pt/Al2O3 at 225 C. Stable catalyst performance and high selectivity was observed. Upon a comparison of two 'bio-alcohols', bio-ethanol and Sorbitol (a sugar alcohol), the latter one is a better feedstock from overall energy utilization viewpoint but the use of it results in a broad range of products. Interestingly, in the case of sorbitol-ethanol mixtures, an improvement in the hydrogen yield was observed. (author)

  7. Emission consequences of introducing bio ethanol as a fuel for gasoline cars

    Winther, Morten Mentz; Møller, Flemming; Jensen, Thomas Christian

    2012-01-01

    difference values calculated for the individual cars. The large standard deviations introduce some uncertainties in the final averages computed for each emission component.The vehicle based emissions are made up for two fossil fuel baseline scenarios (FS), characterised by high and low traffic growth rates......This article describes the direct vehicle emission impact of the future use of bio ethanol as a fuel for gasoline cars in Denmark arising from the vehicle specific fuel consumption and emission differences between neat gasoline (E0) and E5/E85 gasoline-ethanol fuel blends derived from emission...... standard introduced in Europe from the mid-2000s. This matches well with the propagation of the FFV technology in Europe.For vehicles using E5 rather than E0, the average fuel consumption and emission differences are small. For CO, VOC and NOx the derived average differences are 0.5%, −5% and 7...

  8. 2nd Tourism Postdisciplinarity Conference

    Following the noted success of the 1st international conference on postdisciplinary approaches to tourism studies (held in Neuchatel, Switzerland, 19-22 June, 2013), we are happy to welcome you to the 2nd Tourism Postdisciplinarity Conference. Postdisciplinarity surpasses the boundaries of...... study less embedded in that system of thought. Postdisciplinarity is an epistemological endeavour that speaks of knowledge production and the ways in which the world of physical and social phenomena can be known. It is also an ontological discourse as it concerns what we call ‘tourism...

  9. 家族企业代际传承及二代推动战略转型的绩效研究%Performance Study of Intergenerational Succession and Strategic Transformation Driven by the 2nd Generation of Family Business

    汪祥耀; 金一禾

    2015-01-01

    本文将家族企业代际传承分为参与管理、共同管理和接收管理三个阶段,探究了处于不同阶段家族企业的绩效情况以及二代推动的家族企业战略转型对企业绩效的影响。利用2010-2012年我国A股主板上市公司中家族企业的样本展开实证研究,得出如下结论:二代进入家族企业高管,参与家族企业的日常经营和战略决策,或者与一代共同管理家族企业,对企业业绩产生正面影响;由于样本数量较少的客观原因,接收管理后企业绩效的经济后果关系未能得到证实;二代推动的战略转型对共同管理和企业绩效的关系起反向调节作用,在代际传承的共同管理阶段实施战略转型会降低原有真实绩效。%This paper divides the intergeneration succession of family business into three phases, including Involvement Management, Co-management, and Takeover Management, then researches the performance of intergenerational succession and strategic transformation driven by the 2nd generation.The empirical study of the listed family firms in China's A-share main market in the years of 2010-2012 finds that the family firms with the 2nd generation involvement management and co-management have a better performance, that there is no proof of relationship between takeover management and firm perform-ance due to the lack of enough samples.Besides, the strategic transformation driven by the 2nd generation has a reverse effect on the relationship between the co-management and firm performance, and the strategic transformation will reduce the o-riginal real performance in the co-management phase.

  10. "Me-A Different 2nd Generation of the Wealthy"%"我——就是不一样的富二代"

    Guo Yan

    2010-01-01

    @@ In recent years,phrases like "G2 of the Wealthy"are frequently mentioned by people,and discussions on the second generation of wealthy Chinese are a hot topic.However,people still have the impression that"G2 of the" Wealthy"is a generation which lacds nothing but significance and pursuit,a generation without responsibility and lnly meaningless individuality.

  11. Enhanced animal productivity and health with improved manure management in 2nd Generation Environmentally Superior Technology in North Carolina: II. Air quality

    The aim of this study was to evaluate the effects of improved manure management on air quality and the beneficial effect of a cleaner environment on animal productivity and health using a second generation of Environmentally Superior Technology. The second generation system combines solid-liquid sep...

  12. 2nd Historic Mortars Conference

    Hughes, John; Groot, Caspar; Historic Mortars : Characterisation, Assessment and Repair

    2012-01-01

    This volume focuses on research and practical issues connected with mortars on historic structures. The book is divided into four sections: Characterisation of Historic Mortars, Repair Mortars and Design Issues, Experimental Research into Properties of Repair Mortars, and Assessment and Testing. The papers present the latest work of researchers in their field. The individual contributions were selected from the contributions to the 2nd Historic Mortars Conference, which took place in Prague, September, 22-24, 2010. All papers were reviewed and improved as necessary before publication. This peer review process by the editors resulted in the 34 individual contributions included in here. One extra paper reviewing and summarising State-of-the-Art knowledge covered by this publication was added as a starting and navigational point for the reader. The editors believe that having these papers in print is important and they hope that it will stimulate further research into historic mortars and related subjects. 

  13. PEM Fuel Cells with Bio-Ethanol Processor Systems A Multidisciplinary Study of Modelling, Simulation, Fault Diagnosis and Advanced Control

    Feroldi, Diego; Outbib, Rachid

    2012-01-01

    An apparently appropriate control scheme for PEM fuel cells may actually lead to an inoperable plant when it is connected to other unit operations in a process with recycle streams and energy integration. PEM Fuel Cells with Bio-Ethanol Processor Systems presents a control system design that provides basic regulation of the hydrogen production process with PEM fuel cells. It then goes on to construct a fault diagnosis system to improve plant safety above this control structure. PEM Fuel Cells with Bio-Ethanol Processor Systems is divided into two parts: the first covers fuel cells and the second discusses plants for hydrogen production from bio-ethanol to feed PEM fuel cells. Both parts give detailed analyses of modeling, simulation, advanced control, and fault diagnosis. They give an extensive, in-depth discussion of the problems that can occur in fuel cell systems and propose a way to control these systems through advanced control algorithms. A significant part of the book is also given over to computer-aid...

  14. Using the residue of spirit production and bio-ethanol for protein production by yeasts.

    Silva, Cristina F; Arcuri, Silvio L; Campos, Cássia R; Vilela, Danielle M; Alves, José G L F; Schwan, Rosane F

    2011-01-01

    The residue (vinasse) formed during the distillation of bio-ethanol and cachaça, a traditional rum-type spirit produced from sugar-cane in Brazil, is highly harmful if discharged into the environment due to high values of COD and BOD. One possibility for minimizing the impact of vinasse in soils and waters is to use the residue in the production of microbial biomass for use as an animal feed supplement that will provide high levels on nitrogen (>9% d.m.) and low content of nucleic (≤ 10% d.m.) This paper reports the production and quality of biomass produced from fermentation of Saccharomyces cerevisiae and Candida parapsilosis in culture media under 12 different culture conditions and the respective effects of each variable (glucose, yeast extract, peptone, potassium phosphate, vinasse, pH and temperature). Of the S. cerevisiae isolates tested, two (VR1 and PE2) originating from fuel alcohol-producing plants were identified as offering the best potential for the industrial production of single cell protein from vinasse due to highest biomass productivity. Our results showed a potential viable and economic use of vinasse. PMID:20864326

  15. Screening of Jerusalem artichoke varieties for bio-ethanol production in Portugal

    Passarinho, P.C.; Oliveira, A.C.; Rosa, M.F. [INETI, Departamento de Energias Renovaveis, Estrada do Paco do Lumiar, Ed. G, 1649-038, Lisboa (Portugal)

    2008-07-01

    The aim of this work was the evaluation of the potential of 9 Jerusalem artichoke varieties for the sustainable production of bio-ethanol in Portugal. The tubers, which are the part of the plant with higher sugar content, were harvested at different stages of development (29 to 55 weeks), and crashed for juice extraction. The two phases obtained were characterized in terms of total sugars, protein, ash and dry matter. The ethanol productivity of the different J. artichoke varieties was then evaluated fermenting juice or mixtures of juice and pulp aqueous extract with a strain of Kluyveromyces marxianus, a yeast able to hydrolyze and ferment inulin polymers. The chamical characteristic more dependable on the harvest period was the amount of total sugars in the tubers. Juices, obtained until 48 weeks development, contained 173 - 235 g/L of total sugars while juices from the last harvest presented markedly lower sugar contents, indicating crop degradation or sugar migration to the soil. Regarding the fermentative process, ethanol yields ranged from 0.3 to 0.5 g/g. The main conclusion of this work indicates C13 variety as the best. Although bearing a lower sugar concentration in tubers, the substantially higher agricultural productivities (kg/m2) after 8 months growing allowed to estimate productions higher than 10 000 L/ha.

  16. Enhanced animal productivity and health with improved manure management in 2nd Generation Environmentally Superior Technology in North Carolina: I. Water quality

    New legislation in North Carolina promotes the replacement of old lagoon technology with new Environmentally Superior Technology. Scientists at ARS Florence Center and industry cooperators completed design and demonstration of a second generation treatment system for swine waste that can achieve hig...

  17. Techno-economic evaluation of 2nd generation bioethanol production from sugar cane bagasse and leaves integrated with the sugar-based ethanol process

    Macrelli Stefano

    2012-04-01

    Full Text Available Abstract Background Bioethanol produced from the lignocellulosic fractions of sugar cane (bagasse and leaves, i.e. second generation (2G bioethanol, has a promising market potential as an automotive fuel; however, the process is still under investigation on pilot/demonstration scale. From a process perspective, improvements in plant design can lower the production cost, providing better profitability and competitiveness if the conversion of the whole sugar cane is considered. Simulations have been performed with AspenPlus to investigate how process integration can affect the minimum ethanol selling price of this 2G process (MESP-2G, as well as improve the plant energy efficiency. This is achieved by integrating the well-established sucrose-to-bioethanol process with the enzymatic process for lignocellulosic materials. Bagasse and leaves were steam pretreated using H3PO4 as catalyst and separately hydrolysed and fermented. Results The addition of a steam dryer, doubling of the enzyme dosage in enzymatic hydrolysis, including leaves as raw material in the 2G process, heat integration and the use of more energy-efficient equipment led to a 37 % reduction in MESP-2G compared to the Base case. Modelling showed that the MESP for 2G ethanol was 0.97 US$/L, while in the future it could be reduced to 0.78 US$/L. In this case the overall production cost of 1G + 2G ethanol would be about 0.40 US$/L with an output of 102 L/ton dry sugar cane including 50 % leaves. Sensitivity analysis of the future scenario showed that a 50 % decrease in the cost of enzymes, electricity or leaves would lower the MESP-2G by about 20%, 10% and 4.5%, respectively. Conclusions According to the simulations, the production of 2G bioethanol from sugar cane bagasse and leaves in Brazil is already competitive (without subsidies with 1G starch-based bioethanol production in Europe. Moreover 2G bioethanol could be produced at a lower cost if subsidies were used to compensate for the

  18. [Implications of TCGA Network Data on 2nd Generation Immunotherapy Concepts Based on PD-L1 and PD-1 Target Structures].

    Peters, I; Tezval, H; Kramer, M W; Wolters, M; Grünwald, V; Kuczyk, M A; Serth, J

    2015-11-01

    The era of cytokines, given to patients with metastatic renal cell carcinoma (mRCC) as part of an unspecific immunomodulatory treatment concept, seems to have ended with the introduction of targeted therapies. However, preliminary data from studies on treatment with checkpoint inhibitors (e. g. anti-PD-1 and anti-PD-L1) may point the way to second-generation immunotherapy. The rationale of such immunomodulatory treatment is to stop or interrupt the tumour from "escaping" the body's immune defence. Thompson et al. report that increased protein expression of PD-L1 (CD274/ B7-H1) in tumour cells and tumour-infiltrating immune cells (TILs; lymphocytes and histiocytes) is associated with unfavourable clinical pathological parameters as well as poor survival. In small pilot groups of mRCC patients it was found that increased PD-L1 protein expression in tumours and TILs may be correlated with the objective response to anti-PD-1 treatment. Sometimes, however, a very wide variety of response rates was observed, which raises the question if this can be explained by individual expression levels of PD-L1 (CD 274) or PD-1 (PDCD1).Recently published data from the Cancer Genome Atlas (TCGA) Kidney Renal Clear Cell Carcinoma (KIRC) Network now provide a genome-wide data base that allows us to review or validate the molecular results obtained in clear cell renal cell carcinomas (ccRCC) to date.In this study, we analysed the TCGA KIRC mRNA expression data for PD-L1 and PD-1 for a possible association with clinical pathological parameters and the survival of 417 ccRCC patients.The mRNA expression of PD-L1 in primary nephrectomy specimens revealed no significant association with unfavourable clinical parameters. Interestingly, though, a positive correlation with patient survival was found (HR=0,59, p=0,006).These results, which partly contradict the concept applied to date, point out the necessity to ascertain the characteristics of PD-L1 and PD-1 expression at mRNA and protein

  19. Environmental Assessment of 2nd Generation Bio-ethanol

    Wenzel, Henrik

    2007-01-01

    Throughout the world, nations are seeking ways to decrease CO2 emissions and to reduce their dependency on fossil fuels, especially oil and gas deriving from so-called politically unstable regions. The efforts comprise the energy sector (heat and electricity) as well as the transport sector. An...... oil saving is, therefore, that biomass substitutes gas in the heat & power sector and gas substitute oil in the transport sector. By taking this path, we overall achieve almost twice as high a CO2 reduction and save almost twice as much oil, as if we want to substitute the oil via car engines through...... conversion to ethanol. We must acknowledge that society will use natural gas and other fossil fuels for heat & power production for the next 40 years ahead. Throughout this period of time, therefore, we can save them more efficiently there, and we will only lose on CO2 and oil dependency, if we use our...

  20. A 2nd generation cosmic axion experiment

    Hagmann, C; Stoeffl, W.; Van Bibber, K.; Daw, E.; Kinion, D.; Rosenberg, L; Sikivie, P.; Sullivan, N.; D. Tanner; Moltz, D.; Nezrick, F.; Turner, M; Golubev, N.; Kravchuk, L.

    1995-01-01

    An experiment is described to detect dark matter axions trapped in the halo of our galaxy. Galactic axions are converted into microwave photons via the Primakoff effect in a static background field provided by a superconducting magnet. The photons are collected in a high Q microwave cavity and detected by a low noise receiver. The axion mass range accessible by this experiment is 1.3-13 micro-eV. The expected sensitivity will be roughly 50 times greater than achieved by previous experiments i...

  1. A 2nd generation cosmic axion experiment

    Hagmann, C A; Van Bibber, K; Daw, E J; Kinion, D S; Rosenberg, L J; Sikivie, P; Sullivan, N; Tanner, D B; Moltz, D M; Nezrick, F A; Turner, M; Golubev, N A; Kravchuk, L V

    1995-01-01

    An experiment is described to detect dark matter axions trapped in the halo of our galaxy. Galactic axions are converted into microwave photons via the Primakoff effect in a static background field provided by a superconducting magnet. The photons are collected in a high Q microwave cavity and detected by a low noise receiver. The axion mass range accessible by this experiment is 1.3-13 micro-eV. The expected sensitivity will be roughly 50 times greater than achieved by previous experiments in this mass range. The assembly of the detector is well under way at LLNL and data taking will start in mid-1995.

  2. Life cycle assessment and resource management options for bio-ethanol production from cane molasses in Indonesia

    Kummamuru Venkata, Bharadwaj

    2013-01-01

    The intent of this thesis is to analyse the sustainability of producing bio-ethanol from cane molasses in Indonesia and its potential to replace gasoline in the transportation sector. A field trip was conducted in East Java, Indonesia, and data was gathered for analysis. Life cycle assessment (LCA) was performed to analyse the net emissions and energy consumption in the process chain. The greenhouse gas (GHG) emissions of the life cycle are 17.45 gCO2e per MJ of ethanol produced. In compariso...

  3. Comparative study of bio-ethanol production from mahula (Madhuca latifolia L.) flowers by Saccharomyces cerevisiae and Zymomonas mobilis

    Behera, Shuvashish; Mohanty, Rama Chandra [Department of Botany, Utkal University, Vanivihar, Bhubaneswar 751004, Orissa (India); Ray, Ramesh Chandra [Microbiology Laboratory, Central Tuber Crops Research Institute (Regional Centre), Bhubaneswar 751019, Orissa (India)

    2010-07-15

    Mahula (Madhuca latifolia L.) flower is a suitable alternative cheaper carbohydrate source for production of bio-ethanol. Recent production of bio-ethanol by microbial fermentation as an alternative energy source has renewed research interest because of the increase in the fuel price. Saccharomyces cerevisiae (yeast) and Zymomonas mobilis (bacteria) are two most widely used microorganisms for ethanol production. In this study, experiments were carried out to compare the potential of the yeast S. cerevisiae (CTCRI strain) with the bacterium Z. mobilis (MTCC 92) for ethanol fermentation from mahula flowers. The ethanol production after 96 h fermentation was 149 and 122.9 g kg{sup -1} flowers using free cells of S. cerevisiae and Z. mobilis, respectively. The S. cerevisiae strain showed 21.2% more final ethanol production in comparison to Z. mobilis. Ethanol yield (Yx/s), volumetric product productivity (Qp), sugar to ethanol conversion rate (%) and microbial biomass concentration (X) obtained by S. cerevisiae were found to be 5.2%, 21.1%, 5.27% and 134% higher than Z. mobilis, respectively after 96 h of fermentation. (author)

  4. Comparative study of bio-ethanol production from mahula (Madhuca latifolia L.) flowers by Saccharomyces cerevisiae and Zymomonas mobilis

    Mahula (Madhuca latifolia L.) flower is a suitable alternative cheaper carbohydrate source for production of bio-ethanol. Recent production of bio-ethanol by microbial fermentation as an alternative energy source has renewed research interest because of the increase in the fuel price. Saccharomyces cerevisiae (yeast) and Zymomonas mobilis (bacteria) are two most widely used microorganisms for ethanol production. In this study, experiments were carried out to compare the potential of the yeast S. cerevisiae (CTCRI strain) with the bacterium Z. mobilis (MTCC 92) for ethanol fermentation from mahula flowers. The ethanol production after 96 h fermentation was 149 and 122.9 g kg-1 flowers using free cells of S. cerevisiae and Z. mobilis, respectively. The S. cerevisiae strain showed 21.2% more final ethanol production in comparison to Z. mobilis. Ethanol yield (Yx/s), volumetric product productivity (Qp), sugar to ethanol conversion rate (%) and microbial biomass concentration (X) obtained by S. cerevisiae were found to be 5.2%, 21.1%, 5.27% and 134% higher than Z. mobilis, respectively after 96 h of fermentation. (author)

  5. Sistema especialista de 2ª geração para diagnose técnica: modelo e procedimento 2nd generation expert system for technical diagnosis: a model and a procedure

    Néocles Alves Pereira

    1994-04-01

    Full Text Available Este trabalho trata da diagnose em equipamentos industriais através do uso de Sistemas Especialistas. Com o objetivo de desenvolver procedimentos que contribuam na construção de Sistemas Especialistas para diagnose em Manutenção Industrial, consideramos os chamados Sistemas Especialistas de 2ª Geração. Propomos um modelo modificado e um procedimento de diagnose. Na estratégia de diagnose utilizamos uma busca "top-down best-first", que combina dois tipos de tratamento de incerteza: (i entropia, para decidir pelo melhor caminho nas estruturas de conhecimento, e (ii crença nos sintomas, para validar os diagnósticos obtidos. Esta proposta traz as seguintes vantagens: base de conhecimento mais completa, melhores explicação e apresentação de diagnósticos finais. Desenvolvemos um protótipo com base em informações reais sobre bombas centrífugas.This paper deals with the diagnosis of industrial equipments through the use of Expert Systems. Intending to develop procedures that result in diagnosis knowledge bases for Industrial Maintenance, we have considered 2nd Generation Expert Systems. We have proposed a modified model and a diagnosis procedure. We used for the diagnosis strategy a "top-down best-first search", that combines two types of uncertainty treatment: (i entropy, to find the best way in the search throughout knowledge structures, (ii belief in the symptoms, to validate the resultant diagnostics. This proposal has the following advantages: a more complete knowledge base, a better explanation and presentation of the resultant diagnostics. We have developed a prototype considering real informations about centrifugal pumps.

  6. Use of ethanol in public urban transport: BEST (BioEthanol for Sustainable Transport) Project; Uso de etanol no transporte publico urbano: projeto BEST (Bio Ethanol para o Transporte Sustentavel)

    Moreira, Jose Roberto; Apolinario, Sandra; Pecora, Vanessa [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa; Velazquez, Silvia [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil)

    2008-07-01

    This paper present the BEST project - Bio Ethanol for Sustainable Transport, that aims to promote the ethanol usage, replacing diesel, in the urban public transport in Brazil and worldwide. Apart from Sao Paulo, leading city in the Americas, another eight cities located in Europe and Asia takes part in the project. One of the Brazilian project's goals is to evaluate ethanol usage as diesel fuel replacement in public transport buses by comparatively following the operational output of the experimental fleet, taking as reference an equivalent diesel bus. The utilized test vehicles will be evaluated and monitored to demonstrate ethanol energetic efficiency and, after the results the BEST project and the European Union will set a blue print for public policies to incentive ethanol usage in the urban public transport. The results will allow identifying technical and economical barriers that will eventually overlap the viability process of this technology in the Brazilian public transport. (author)

  7. Co/Zr substitution in a cerium-zirconium oxide by catalytic steam reforming of bio-ethanol

    This work deals with the production of hydrogen by bio-ethanol catalytic steam reforming. The aim is to develop a catalyst active in ethanol conversion, selective in hydrogen and resistant to deactivation, particularly those induced by the formation of carbon deposition. The metal-support interaction being one of the keys of this challenge, catalysts in which a transition metal is inserted into an oxide by a liquid synthesis method (by the precursor method) have been developed. The initial insertion of cobalt into a cerium oxide-zirconia structure presents the advantages to increase the redox properties of the host oxide and to allow a stable reduction of a cobalt part while favoring the metal-support interaction. (O.M.)

  8. Experimental Stochatics (2nd edition)

    Otto Moeschlin and his co-authors have written a book about simulation of stochastic systems. The book comes with a CD-ROM that contains the experiments discussed in the book, and the text from the book is repeated on the CD-ROM. According to the authors, the aim of the book is to give a quick introduction to stochastic simulation for 'all persons interested in experimental stochastics'. To please this diverse audience, the authors offer a book that has four parts. Part 1, called 'Artificial Randomness', is the longest of the four parts. It gives an overview of the generation, testing and basic usage of pseudo random numbers in simulation. Although algorithms for generating sequences of random numbers are fundamental to simulation, it is a slightly unusual choice to give it such weight in comparison to other algorithmic topics. The remaining three parts consist of simulation case studies. Part 2, 'Stochastic Models', treats four problems - Buffon's needle, a queuing system, and two problems related to the kinetic theory of gases. Part 3 is called 'Stochastic Processes' and discusses the simulation of discrete time Markov chains, birth-death processes, Brownian motion and diffusions. The last section of Part 3 is about simulation as a tool to understand the traffic flow in a system controlled by stoplights, an area of research for the authors. Part 4 is called 'Evaluation of Statistical Procedures'. This section contains examples where simulation is used to test the performance of statistical methods. It covers four examples: the Neymann-Pearson lemma, the Wald sequential test, Bayesian point estimation and Hartigan procedures. The CD-ROM contains an easy-to-install software package that runs under Microsoft Windows. The software contains the text and simulations from the book. What I found most enjoyable about this book is the number of topics covered in the case studies. The highly individual selection of applications, which may serve as a source of inspiration

  9. Abstracts: 2nd interventional MRI symposium

    Main topics of the 2nd interventional MRI symposium were: MR compatibility and pulse sequences; MR thermometry, biopsy, musculoskeletal system; laser-induced interstitial thermotherapy, radiofrequency ablations; intraoperative MR; vascular applications, breast, endoscopy; focused ultrasound, cryotherapy, perspectives; poster session with 34 posters described. (AJ)

  10. Abstracts: 2nd interventional MRI symposium

    Anon.

    1997-09-01

    Main topics of the 2nd interventional MRI symposium were: MR compatibility and pulse sequences; MR thermometry, biopsy, musculoskeletal system; laser-induced interstitial thermotherapy, radiofrequency ablations; intraoperative MR; vascular applications, breast, endoscopy; focused ultrasound, cryotherapy, perspectives; poster session with 34 posters described. (AJ)

  11. Continuous production of bio-oil by catalytic liquefaction from wet distiller’s grain with solubles (WDGS) from bio-ethanol production

    Bio-refinery concepts are currently receiving much attention due to the drive toward flexible, highly efficient systems for utilization of biomass for food, feed, fuel and bio-chemicals. One way of achieving this is through appropriate process integration, in this particular case combining enzymatic bio-ethanol production with catalytic liquefaction of the wet distillers grains with soluble, a byproduct from the bio-ethanol process. The catalytic liquefaction process is carried out at sub-critical conditions (280–370 °C and 25 MPa) in the presence of a homogeneous alkaline and a heterogeneous Zirconia catalyst, a process known as the Catliq® process. In the current work, catalytic conversion of WDGS was performed in a continuous pilot plant with a maximum capacity of 30 dm3 h−1 of wet biomass. In the process, WDGS was converted to bio-oil, gases and water-soluble organic compounds. The oil obtained was characterized using several analysis methods, among them elementary analysis and GC–MS. The study shows that WDGS can be converted to bio oil with high yields. The results also indicate that through the combination of bio-ethanol production and catalytic liquefaction, it is possible to significantly increase the liquid product yield and scope, opening up for a wider end use applicability. -- Highlights: ► Hydrothermal liquefaction of wet biomass. ► Product phase analysis: oil, acqeous, gas and mineral phase. ► Energy and mass balance evaluation.

  12. Bio-ethanol production by fermentation of ricotta cheese whey as an effective alternative non-vegetable source

    Sansonetti, Sascha; Curcio, Stefano; Calabro, Vincenza; Iorio, Gabriele [Department of Engineering Modeling, University of Calabria, Ponte P. Bucci, Cubo 42/A, 87036 Rende, Cosenza (Italy)

    2009-12-15

    The aim of the present paper is to investigate the feasibility of bio-ethanol production by batch fermentation of ricotta cheese whey (''Scotta''), a dairy industry waste characterized by lactose concentration ranging from 4.5% to 5.0% (w/w) and, with respect to traditional (raw) whey, by much lower protein content. Scotta, therefore, could represent an effective non-vegetable source for renewable energy production. The microrganism used to carry out the fermentation processes was the yeast Kluyveromyces marxianus. Preliminary experiments, performed in aerobic conditions on different volumes of scotta, have shown the actual growth of the yeast. The subsequent fermentation experiments were carried out, in anaerobic conditions, on three different substrates: scotta, raw cheese whey and deproteinized whey. The experimental data have demonstrated the process feasibility: scotta is an excellent substrate for fermentation and exhibits better performance with respect to both raw cheese whey and deproteinized whey. Complete lactose consumption, indeed, was observed in the shortest time (13 h) and with the highest ethanol yield (97% of the theoretical value). (author)

  13. Exergy and CO2 Analyses as Key Tools for the Evaluation of Bio-Ethanol Production

    Qian Kang; Tianwei Tan

    2016-01-01

    The background of bioethanol as an alternative to conventional fuels is analyzed with the aim of examining the efficiency of bioethanol production by first (sugar-based) and second (cellulose-based) generation processes. Energy integration is of paramount importance for a complete recovery of the processes’ exergy potential. Based upon literature data and our own findings, exergy analysis is shown to be an important tool in analyzing integrated ethanol production from an efficiency and cost p...

  14. Engineering of core Pentose Metabolism in Saccharomyces cerevisiae for Bio-ethanol Production

    Pereira, Filipa Alexandra Barroso

    2013-01-01

    Tese de Doutoramento em Ciências (Especialidade em Biologia) Renewable fuels that do not contribute to atmospheric carbon dioxide have gained increased attention due to peak oil and the possibility of carbon dioxide induced climate change. Bioethanol is the currently largest biofuel in terms of annual production and is mainly produce by fermentation of hexose sugars in sucrose or starch from sugarcane or corn by the yeast Saccharomyces cerevisiae. Second generation biofuel is ...

  15. Bioconversion of biodegradable municipal solid waste (BMSW) to glucose for bio-ethanol production.

    Li, A

    2008-01-01

    Municipal solid waste (MSW), as an emerging biomass source, presents a unique opportunity for large-scale second-generation bioethanol production. Feedstock supply is reliable and in sufficient quantity, making it a promising biomass source but the conversion yield is currently too low to make it financially attractive. This work presented in this thesis provides a better understanding of bioconversion systems, in particular of pre-treatment and hydrolysis processes which contribute to more t...

  16. 2nd International Conference on Natural Fibers

    Rana, Sohel

    2016-01-01

    This book collects selected high quality articles submitted to the 2nd International Conference on Natural Fibers (ICNF2015). A wide range of topics is covered related to various aspects of natural fibres such as agriculture, extraction and processing, surface modification and functionalization, advanced structures, nano fibres, composites and nanocomposites, design and product development, applications, market potential, and environmental impact. Divided into separate sections on these various topics, the book presents the latest high quality research work addressing different approaches and techniques to improve processing, performance, functionalities and cost-effectiveness of natural fibre and natural based products, in order to promote their applications in various advanced technical sectors. This book is a useful source of information for materials scientists, teachers and students from various disciplines as well as for R& D staff in industries using natural fibre based materials. .

  17. Simultaneous production of bio-ethanol and bleached pulp from red algae.

    Yoon, Min Ho; Lee, Yoon Woo; Lee, Chun Han; Seo, Yung Bum

    2012-12-01

    The red algae, Gelidium corneum, was used to produce bleached pulp for papermaking and ethanol. Aqueous extracts obtained at 100-140 °C were subjected to saccharification, purification, fermentation, and distillation to produce ethanol. The solid remnants were bleached with chlorine dioxide and peroxide to make pulp. In the extraction process, sulfuric acid and sodium thiosulfate were added to increase the extract yield and to improve de-polymerization of the extracts, as well as to generate high-quality pulp. An extraction process incorporating 5% sodium thiosulfate by dry weight of the algae provided optimal production conditions for the production of both strong pulp and a high ethanol yield. These results suggest that it might be possible to utilize algae instead of trees and starch for pulp and ethanol production, respectively. PMID:23073109

  18. Sun-to-Wheels Exergy Efficiencies for Bio-Ethanol and Photovoltaics.

    Williams, Eric; Sekar, Ashok; Matteson, Schuyler; Rittmann, Bruce E

    2015-06-01

    The two main paths to power vehicles with sunlight are to use photosynthesis to grow biomass, converting to a liquid fuel for an internal combustion engine or to generate photovoltaic electricity that powers the battery of an electric vehicle. While the environmental attributes of these two paths have been much analyzed, prior studies consider the current state of technology. Technologies for biofuel and photovoltaic paths are evolving; it is critical to consider how progress might improve environmental performance. We address this challenge by assessing the current and maximum theoretical exergy efficiencies of bioethanol and photovoltaic sun-to-wheels process chains. The maximum theoretical efficiency is an upper bound stipulated by physical laws. The current net efficiency to produce motive power from silicon photovoltaic modules is estimated at 5.4%, much higher than 0.03% efficiency for corn-based ethanol. Flat-plate photovoltaic panels also have a much higher theoretical maximum efficiency than a C4 crop plant, 48% versus 0.19%. Photovoltaic-based power will always be vastly more efficient than a terrestrial crop biofuel. Providing all mobility in the U.S. via crop biofuels would require 130% of arable land with current technology and 20% in the thermodynamic limit. Comparable values for photovoltaic-based power are 0.7% and 0.081%, respectively. PMID:25938893

  19. Impacts of Thai bio-ethanol policy target on land use and greenhouse gas emissions

    The growing demand for biofuels has led to an increased demand for feedstocks which in turn is anticipated to induce changes in the cropping systems or land requirement for agriculture use. This study used consequential life cycle assessment (LCA) to evaluate the environmental consequences of possible (future) changes in agricultural production systems and determine their effects on land use change (LUC) and greenhouse gas (GHG) implications when cassava demand in Thailand increases. Six different cropping systems to increase cassava production including converting unoccupied land to cropland, yield improvement, displacement of area currently under sugarcane cultivation and the other potential changes in cropping systems in Vietnam and Australia are modeled and assessed. The comparative results show that LUC is an important factor in overall GHG emissions of the first generation biofuels especially change in soil carbon stock contributing about 58-60% of the net GHG emissions. Increased cassava production by expanding cultivation area has a significantly larger effect on GHG emissions than increased productivity. The analysis shows that increasing productivity of both sugarcane and cassava are important ways to maximize benefits in using of certain area of Thailand to serve both the food and fuel industries.

  20. 2nd International Arctic Ungulate Conference

    A. Anonymous

    1996-01-01

    Full Text Available The 2nd International Arctic Ungulate Conference was held 13-17 August 1995 on the University of Alaska Fairbanks campus. The Institute of Arctic Biology and the Alaska Cooperative Fish and Wildlife Research Unit were responsible for organizing the conference with assistance from biologists with state and federal agencies and commercial organizations. David R. Klein was chair of the conference organizing committee. Over 200 people attended the conference, coming from 10 different countries. The United States, Canada, and Norway had the largest representation. The conference included invited lectures; panel discussions, and about 125 contributed papers. There were five technical sessions on Physiology and Body Condition; Habitat Relationships; Population Dynamics and Management; Behavior, Genetics and Evolution; and Reindeer and Muskox Husbandry. Three panel sessions discussed Comparative caribou management strategies; Management of introduced, reestablished, and expanding muskox populations; and Health risks in translocation of arctic ungulates. Invited lectures focused on the physiology and population dynamics of arctic ungulates; contaminants in food chains of arctic ungulates and lessons learned from the Chernobyl accident; and ecosystem level relationships of the Porcupine Caribou Herd.

  1. Exogenous attention enhances 2nd-order contrast sensitivity.

    Barbot, Antoine; Landy, Michael S; Carrasco, Marisa

    2011-05-11

    Natural scenes contain a rich variety of contours that the visual system extracts to segregate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are predominant in natural scenes and cannot be detected by linear mechanisms. We assess whether and how exogenous attention--the involuntary and transient capture of spatial attention--affects the contrast sensitivity of channels sensitive to 2nd-order, texture-defined patterns. Using 2nd-order, texture-defined stimuli, we demonstrate that exogenous attention increases 2nd-order contrast sensitivity at the attended location, while decreasing it at unattended locations, relative to a neutral condition. By manipulating both 1st- and 2nd-order spatial frequency, we find that the effects of attention depend both on 2nd-order spatial frequency of the stimulus and the observer's 2nd-order spatial resolution at the target location. At parafoveal locations, attention enhances 2nd-order contrast sensitivity to high, but not to low 2nd-order spatial frequencies; at peripheral locations attention also enhances sensitivity to low 2nd-order spatial frequencies. Control experiments rule out the possibility that these effects might be due to an increase in contrast sensitivity at the 1st-order stage of visual processing. Thus, exogenous attention affects 2nd-order contrast sensitivity at both attended and unattended locations. PMID:21356228

  2. Bio-ethanol

    Wenzel, Henrik

    2007-01-01

    Throughout the world, nations are seeking ways to decrease CO2 emissions and to reduce their dependency on fossil fuels, especially oil and gas deriving from so-called politically unstable regions. The efforts comprise the energy sector (heat and electricity) as well as the transport sector. An...... oil saving is, therefore, that biomass substitutes gas in the heat & power sector and gas substitute oil in the transport sector. By taking this path, we overall achieve almost twice as high a CO2 reduction and save almost twice as much oil, as if we want to substitute the oil via car engines through...... conversion to ethanol. We must acknowledge that society will use natural gas and other fossil fuels for heat & power production for the next 40 years ahead. Throughout this period of time, therefore, we can save them more efficiently there, and we will only lose on CO2 and oil dependency, if we use our...

  3. The influence of surface microstructure and chemical composition on corrosion behaviour in fuel-grade bio-ethanol of low-alloy steel modified by plasma nitro-carburizing and post-oxidizing

    The interaction of bio-ethanol on steel surfaces modified by plasma-assisted diffusion technologies is studied for the first time. The influence of surface microstructure and chemical composition on corrosion behaviour of AISI 4140 low-alloy steel in fuel-grade bio-ethanol was investigated. The steel surfaces were modified by plasma nitro-carburizing followed plasma oxidizing. X-ray diffraction, scanning electron microscopy, optical microscopy, X-ray dispersive spectroscopy, and glow-discharge optical emission spectroscopy were used to characterize the modified surface before and after immersion tests in bio-ethanol up to 77 days. The main corrosion mechanism is pit formation. The pit density and pit size were measured in order to quantify the corrosion resistance which was found to depend more strongly on microstructure and morphology of the oxide layer than on its thickness. The best corrosion protection was observed for samples post-oxidized at 480 °C and 90 min.

  4. Structure and performance of cobalt and nickel catalysts for hydrogen generation from bio-ethanol partial oxidation

    Ehrlich, Heike; Kraleva, Elka [Rostock Univ. (Germany). Leibniz-Institut fuer Katalyse

    2012-07-01

    A hydrogen and CO rich fuel gas used for SOFC applications is obtained directly from ethanol by partial oxidation. Low-cost cobalt and nickel metals supported on different mixed oxides were found to be highly active catalysts in this reaction. The ethanol conversion started above 350 C and increased with increasing reaction temperature. Hydrogen and carbon monoxide were the predominant products at temperatures above 500 C. Among the catalysts studied, CoAlZn and NiAlZn mixed oxides showed to provide the highest H{sub 2} and CO selectivity. By the use of a sol-gel method for catalyst preparation the drawback of oxide sintering at high temperature could be eliminated. It was found that phase composition of the catalysts and their thermal stability depends significantly on the preparation method and chemical composition. (orig.)

  5. Hot compressed water pretreatment of oil palm fronds to enhance glucose recovery for production of second generation bio-ethanol.

    Goh, Chun Sheng; Lee, Keat Teong; Bhatia, Subhash

    2010-10-01

    This work presents the pretreatment of oil palm fronds (OPF) using hot compressed water (HCW) to enhance sugar recovery in enzymatic hydrolysis. A central, composite rotatable design was used to optimize the effect of reaction temperature, reaction time and liquid-solid ratio on the pretreatment process. All variables were found to significantly affect the glucose yield. A quadratic polynomial equation was used to model glucose yield by multiple regression analysis, using response surface methodology (RSM). Using a 10 bar pressurized reactor, the optimum conditions for pretreatment of OPF were found at 178 degrees C, 11.1 min and a liquid-solid ratio of 9.6. The predicted glucose yield was 92.78 wt.% at the optimum conditions. Experimental verification of the optimum conditions gave a glucose yield in good agreement with the estimated value of the model. PMID:20471249

  6. 2nd International technical meeting on small reactors

    The 2nd International Technical Meeting on Small Reactors was held on November 7-9, 2012 in Ottawa, Ontario. The meeting was hosted by Atomic Energy of Canada Limited (AECL) and Canadian Nuclear Society (CNS). There is growing international interest and activity in the development of small nuclear reactor technology. This meeting provided participants with an opportunity to share ideas and exchange information on new developments. This Technical Meeting covered topics of interest to designers, operators, researchers and analysts involved in the design, development and deployment of small reactors for power generation and research. A special session focussed on small modular reactors (SMR) for generating electricity and process heat, particularly in small grids and remote locations. Following the success of the first Technical Meeting in November 2010, which captured numerous accomplishments of low-power critical facilities and small reactors, the second Technical Meeting was dedicated to the achievements, capabilities, and future prospects of small reactors. This meeting also celebrated the 50th Anniversary of the Nuclear Power Demonstration (NPD) reactor which was the first small reactor (20 MWe) to generate electricity in Canada.

  7. Florida Investigates 2nd Possible Local Transmission of Zika Virus

    ... html Florida Investigates 2nd Possible Local Transmission of Zika Virus If confirmed, cases would be first instances of ... Broward County, north of Miami. Infection with the Zika virus, which in most cases is transmitted by mosquitoes, ...

  8. Socio-economic impact in a region in the southern part of Jutland by the establishment of a plant for processing of bio ethanol

    Joergensen, Henning; Hjort-Gregersen, K.

    2005-09-15

    The Farmers Association of Southern Jutland took an interest in the establishment of a plant for processing of Ethanol primarily due to the wish to contribute to the business development in the western part of Southern Jutland. A large plant for production of bio ethanol will bring along a significant number of local jobs with positive derived economic effects in the local community. Further the plant will also form the basis for a new possibility of marketing of cereal crops. From asocial point of view the request to produce ethanol and other biomass based propellants are motivated by the international obligation to reduce emission of greenhouse gasses, which primarily originate from energy production from conventional fossil fuels. A certain amount of fossil fuels is required in the production of crops, but it has been estimated that the net emission of CO{sub 2} by production of ethanol only constitutes 10% of the emission by fossil energy. (au)

  9. 2nd European Advanced Accelerator Concepts Workshop

    Assmann, Ralph; Grebenyuk, Julia

    2015-01-01

    The European Advanced Accelerator Concepts Workshop has the mission to discuss and foster methods of beam acceleration with gradients beyond state of the art in operational facilities. The most cost effective and compact methods for generating high energy particle beams shall be reviewed and assessed. This includes diagnostics methods, timing technology, special need for injectors, beam matching, beam dynamics with advanced accelerators and development of adequate simulations. This workshop is organized in the context of the EU-funded European Network for Novel Accelerators (EuroNNAc2), that includes 52 Research Institutes and universities.

  10. Thermoluminescent characteristics of ZrO2:Nd films

    In this work it is exposed the obtained results after analysing the photo luminescent and thermoluminescent characteristics of activated zirconium oxide with neodymium (ZrO2 :Nd) and its possible application in the UV radiation dosimetry. The realized experiments had as objective to study the characteristics such as the optimum thermal erased treatment, the influence of light on the response, the response depending on the wavelength, the fadeout of the information, the temperature effect, the response depending on the time and the recurring of the response. The results show that the ZrO2 :Nd is a promising material to be used as Tl dosemeter for the UV radiation. (Author)

  11. 2nd Quarter Transportation Report FY 2014

    Gregory, L.

    2014-07-30

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the second quarter of fiscal year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet (ft3) generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  12. A Handbook for Classroom Instruction That Works, 2nd Edition

    Association for Supervision and Curriculum Development, 2012

    2012-01-01

    Perfect for self-help and professional learning communities, this handbook makes it much easier to apply the teaching practices from the ASCD-McREL best-seller "Classroom Instruction That Works: Research-Based Strategies for Increasing Student Achievement, 2nd Edition." The authors take you through the refined Instructional Planning Guide, so you…

  13. 2nd International Conference on Nuclear Physics in Astrophysics

    Fülöp, Zsolt; Somorjai, Endre; The European Physical Journal A : Volume 27, Supplement 1, 2006

    2006-01-01

    Launched in 2004, "Nuclear Physics in Astrophysics" has established itself in a successful topical conference series addressing the forefront of research in the field. This volume contains the selected and refereed papers of the 2nd conference, held in Debrecen in 2005 and reprinted from "The European Physical Journal A - Hadrons and Nuclei".

  14. 2nd International Conference on Data Management Technologies and Applications

    2013-01-01

    The 2nd International Conference on Data Management Technologies and Applications (DATA) aims to bring together researchers, engineers and practitioners interested on databases, data warehousing, data mining, data management, data security and other aspects of information systems and technology involving advanced applications of data.

  15. The 2nd Seminar on Standardization Cooperation in Northeast Asia

    2004-01-01

    @@ The 2nd Seminar on Standardization Cooperation in Northeast Asia(2003) was held in Beijing from Oct 30th - Oct 31st, which was the succession of the first one in Korea, 2002, with the participants coming from the standardization circles in China, Japan and Korea.

  16. Comparative study of bio-ethanol production from mahula (Madhuca latifolia L.) flowers by Saccharomyces cerevisiae cells immobilized in agar agar and Ca-alginate matrices

    Behera, Shuvashish; Mohanty, Rama Chandra [Department of Botany, Utkal University, Vani Vihar, Bhubaneswar 751004, Orissa (India); Kar, Shaktimay; Ray, Ramesh Chandra [Microbiology Laboratory, Central Tuber Crops Research Institute (Regional Centre), Bhubaneswar 751019, Orissa (India)

    2010-01-15

    Batch fermentation of mahula (Madhuca latifolia L., a tree commonly found in tropical rain forest) flowers was carried out using immobilized cells (in agar agar and calcium alginate) and free cells of Saccharomyces cerevisiae. The ethanol yields were 151.2, 154.5 and 149.1 g kg{sup -1} flowers using immobilized (in agar agar and calcium alginate) and free cells, respectively. Cell entrapment in calcium alginate was found to be marginally superior to those in agar agar (2.2% more) as well as over free cell (3.5% more) as regard to ethanol yield from mahula flowers is concerned. Further, the immobilized cells were physiologically active at least for three cycles [150.6, 148.5 and 146.5 g kg{sup -1} (agar agar) and 152.8, 151.5 and 149.5 g kg{sup -1} flowers (calcium alginate) for first, second and third cycle, respectively] of ethanol fermentation without apparently lowering the productivity. Mahula flowers, a renewable, non-food-grade cheap carbohydrate substrate from non-agricultural environment such as forest can serve as an alternative to food grade sugar/starchy crops such as maize, sugarcane for bio-ethanol production. (author)

  17. 2nd International Conference on Green Communications and Networks 2012

    Ma, Maode; GCN 2012

    2013-01-01

    The objective of the 2nd International Conference on Green Communications and Networks 2012 (GCN 2012) is to facilitate an exchange of information on best practices for the latest research advances in the area of communications, networks and intelligence applications. These mainly involve computer science and engineering, informatics, communications and control, electrical engineering, information computing, and business intelligence and management. Proceedings of the 2nd International Conference on Green Communications and Networks 2012 (GCN 2012) will focus on green information technology and applications, which will provide in-depth insights for engineers and scientists in academia, industry, and government. The book addresses the most innovative research developments including technical challenges, social and economic issues, and presents and discusses the authors’ ideas, experiences, findings, and current projects on all aspects of advanced green information technology and applications. Yuhang Yang is ...

  18. 2nd Interdiciplinary Conference on Production, Logistics and Traffic 2015

    Friedrich, Hanno; Thaller, Carina; Geiger, Christiane

    2016-01-01

    This contributed volume contains the selected and reviewed papers of the 2nd Interdisciplinary Conference on Production, Logistics and Traffic (ICPLT) 2015, Dortmund, Germany. The topical focus lies on economic, ecological and societal issues related to commercial transport. The authors are international experts and the paper collection presents the state-of-the-art in the field, thus making this book a valuable read for both practitioners and researchers.

  19. 2nd International Open and Distance Learning (IODL) Symposium

    Reviewed by Murat BARKAN

    2006-01-01

    This closing remarks prepared and presented by Prof. Dr. Murat BARKAN Anadolu University, Eskisehir, TURKEY DEAR GUESTS, As the 2nd International Open and Distance Learning (IODL) Symposium is now drawing to end, I would like to thank you all for your outstanding speeches, distinguished presentations, constructive roundtable and session discussions, and active participation during the last five days. I hope you all share my view that the whole symposium has been...

  20. Exogenous attention enhances 2nd-order contrast sensitivity

    Barbot, Antoine; Landy, Michael S.; Carrasco, Marisa

    2011-01-01

    Natural scenes contain a rich variety of contours that the visual system extracts to segregrate the retinal image into perceptually coherent regions. Covert spatial attention helps extract contours by enhancing contrast sensitivity for 1st-order, luminance-defined patterns at attended locations, while reducing sensitivity at unattended locations, relative to neutral attention allocation. However, humans are also sensitive to 2nd-order patterns such as spatial variations of texture, which are ...

  1. 2nd International Conference on Electric and Electronics (EEIC 2012)

    Advances in Electric and Electronics

    2012-01-01

    This volume contains 108 full length papers presented at the 2nd International Conference on Electric and Electronics (EEIC 2012), held on April 21-22 in Sanya, China, which brings together researchers working in many different areas of education and learning to foster international collaborations and exchange of new ideas. This volume can be divided into two sections on the basis of the classification of manuscripts considered: the first section deals with Electric and the second section with Electronics.

  2. 2nd International Conference on Intelligent Technologies and Engineering Systems

    Chen, Cheng-Yi; Yang, Cheng-Fu

    2014-01-01

    This book includes the original, peer reviewed research papers from the 2nd International Conference on Intelligent Technologies and Engineering Systems (ICITES2013), which took place on December 12-14, 2013 at Cheng Shiu University in Kaohsiung, Taiwan. Topics covered include: laser technology, wireless and mobile networking, lean and agile manufacturing, speech processing, microwave dielectrics, intelligent circuits and systems, 3D graphics, communications, and structure dynamics and control.

  3. Introduction on the 2nd annual general meeting of ARCCNM

    This paper outlines general information on the 2nd annual general meeting of ARCCNM (Asian Regional Cooperative Council for Nuclear Medicine). The international symposium exchanged new development recently on basic and clinical nuclear medicine. Asian school of nuclear medicine is an educational enterprise of ARCCNM, and the objective is to organize and coordinate academic and training programs in nuclear medicine. It will promote nuclear medicine in Asia region through enhancing regional scientific activities and research collaboration

  4. Simultaneous fast pyrolysis and catalytic upgrading of lignin to obtain a marine diesel fuel

    Zhou, Guofeng

    The topic of this Ph.D. project is to convert lignin, a by-product from a 2nd generation bio-ethanol plant, into a marine diesel fuel by fast pyrolysis followed with catalytic upgrading of the pyrolysis vapor. Lignin, a major component of lignocellulosic biomass, is underutilized in the 2nd...

  5. Nano- and micro-powder of zirconia and ceria-supported cobalt catalysts for the steam reforming of bio-ethanol

    Machocki, Andrzej, E-mail: machocki@umcs.lublin.pl [University of Maria Curie-Sklodowska, Faculty of Chemistry, Department of Chemical Technology, 3 Maria Curie-Sklodowska Square, 20-031 Lublin (Poland); Denis, Andrzej; Grzegorczyk, Wieslaw; Gac, Wojciech [University of Maria Curie-Sklodowska, Faculty of Chemistry, Department of Chemical Technology, 3 Maria Curie-Sklodowska Square, 20-031 Lublin (Poland)

    2010-06-15

    The usefulness of nano- and micro-powders of ceria and zirconia as a support of the cobalt-based catalyst as well as additional modification of zirconia-supported cobalt catalysts with cerium for the production of hydrogen in the steam reforming of bio-ethanol (SRE) for fuel cell applications was studied. It was found that mainly different structural features of the nano- and micro-powder of ceria- and zirconia-supported cobalt catalysts are higher cobalt surface area and much smaller average sizes of cobalt crystallites for the catalysts with high-dispersed support. Similarly, the presence of high-dispersed ceria introduced to the zirconia-supported catalysts simultaneously with the deposition of cobalt increases their total and active surface area as well as decreases the size of cobalt crystallites, regardless of the initial dispersion of zirconia support. The results of the temperature-programmed reduction and the temperature-programmed desorption of hydrogen showed that small crystallites of the cobalt phase strongly interact with high-dispersed ceria. Ceria has a great influence on the effects of the SRE. For the nano-powder ceria-supported cobalt catalyst and for the nano-powder zirconia-supported catalysts with the cobalt-ceria active phase the yield of hydrogen formed from one molecule of ethanol supplied to the SRE process was the highest; even at the relatively low temperature of 420 deg. C it is close to 5.5 mol H{sub 2}/mol EtOH. At the same time there were achieved: complete conversion of ethanol, very close to that of water and 92%, 81-84%, 5-6% selectivities to hydrogen, carbon dioxide and carbon monoxide, respectively.

  6. Nano- and micro-powder of zirconia and ceria-supported cobalt catalysts for the steam reforming of bio-ethanol

    The usefulness of nano- and micro-powders of ceria and zirconia as a support of the cobalt-based catalyst as well as additional modification of zirconia-supported cobalt catalysts with cerium for the production of hydrogen in the steam reforming of bio-ethanol (SRE) for fuel cell applications was studied. It was found that mainly different structural features of the nano- and micro-powder of ceria- and zirconia-supported cobalt catalysts are higher cobalt surface area and much smaller average sizes of cobalt crystallites for the catalysts with high-dispersed support. Similarly, the presence of high-dispersed ceria introduced to the zirconia-supported catalysts simultaneously with the deposition of cobalt increases their total and active surface area as well as decreases the size of cobalt crystallites, regardless of the initial dispersion of zirconia support. The results of the temperature-programmed reduction and the temperature-programmed desorption of hydrogen showed that small crystallites of the cobalt phase strongly interact with high-dispersed ceria. Ceria has a great influence on the effects of the SRE. For the nano-powder ceria-supported cobalt catalyst and for the nano-powder zirconia-supported catalysts with the cobalt-ceria active phase the yield of hydrogen formed from one molecule of ethanol supplied to the SRE process was the highest; even at the relatively low temperature of 420 deg. C it is close to 5.5 mol H2/mol EtOH. At the same time there were achieved: complete conversion of ethanol, very close to that of water and 92%, 81-84%, 5-6% selectivities to hydrogen, carbon dioxide and carbon monoxide, respectively.

  7. Two 2nd Circuit decisions represent mixed bag on insurance.

    2000-01-21

    The 2nd U.S. Circuit Court of Appeals in New York issued two important rulings within a week on the extent to which the Americans with Disabilities Act (ADA) regulates insurance practices. [Name removed] v. Allstate Life Insurance Co. was a plaintiff-friendly decision, finding that the insurance company illegally refused to sell life insurance to a married couple because of their mental disability, major depression. [Name removed]. v. Israel Discount Bank of New York was more defendant friendly and tackled the issue of whether the ADA permits different benefit caps for mental and physical disabilities. PMID:11367226

  8. BIPHASIC TREATMENT OF 2ND CLASS ANGLE ANOMALIES

    C. Romanec

    2011-09-01

    Full Text Available Our approach aims at presenting, based on clinical observations and complementary examinations, the effects of a treatment’s setting up during the mixed dentition period. The objectives include the identification of the optimal time of treatment of II/1, II/2 Angle malocclusions, as well as the therapeutic possibilities for the treatment of 2nd class Angle malocclusion during the period of mixed and permanent dentition. The study is based on data collected from 114 clinical cases (69 girls and 45 boys with an age span between 7 and 18 years.

  9. 2nd conference on Continuous Media with Microstructure

    Kuczma, Mieczysław

    2016-01-01

    This book presents research advances in the field of Continuous Media with Microstructure and considers the three complementary pillars of mechanical sciences: theory, research and computational simulation. It focuses on the following problems: thermodynamic and mathematical modeling of materials with extensions of classical constitutive laws, single and multicomponent media including modern multifunctional materials, wave propagation, multiscale and multiphysics processes, phase transformations, and porous, granular and composite materials. The book presents the proceedings of the 2nd Conference on Continuous Media with Microstructure, which was held in 2015 in Łagów, Poland, in memory of Prof. Krzysztof Wilmański. .

  10. Economic analysis of hydrogen production through a bio-ethanol steam reforming process: Sensitivity analyses and cost estimations

    In this study, the hydrogen selling price from ethanol steam reforming has been estimated for two different production scenarios in the United States, i.e. central production (150,000 kg H2/day) and distributed (forecourt) production (1500 kg H2/day), based on a process flowchart generated by Aspen Plus registered including downstream purification steps and economic analysis model template published by the U.S Department of Energy (DOE). The effect of several processing parameters as well as catalyst properties on the hydrogen selling price has been evaluated. 2.69/kg is estimated as the selling price for a central production process of 150,000 kg H2/day and 4.27/kg for a distributed hydrogen production process at a scale of 1500 kg H2/day. Among the parameters investigated through sensitivity analyses, ethanol feedstock cost, catalyst cost, and catalytic performance are found to play a significant role on determining the final hydrogen selling price. (author)

  11. The BEST project - BioEthanol for the Sustainable Transportation - a contribution to the environment of the metropolis; O projeto BEST - BioEtanol para o Transporte Sustentavel - uma contribuicao ao meio ambiente das metropoles

    Gonzalez Velazquez, Silvia Maria Stortini; Santos, Sandra Maria Apolinario; Moreira, Jose Roberto; Melo, Euler Hoffmann; Coelho, Suani Teixeira [Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)], E-mail: silvia@iee.usp.br

    2010-07-01

    The BEST Project - Bio Ethanol for the Sustainable Transportation was an initiative of the European Union, coordinated by the Stockholm City Hall, at Sweden. This project gave incentives the use of ethanol, replacing the Diesel fuel, at the public transportation in Brazil and in the world. The used vehicles in the tests were monitored and evaluated to demonstrate the efficiency and environmental energy of the ethanol, and after the results, the BEST project and the European Union gave recommendations for the formulation of public politics of incentives to the use of technology.

  12. Afs password expiration starts Feb 2nd 2004

    2004-01-01

    Due to security reasons, and in agreement with CERN management, afs/lxplus passwords will fall into line with Nice/Mail passwords on February 2nd and expire annually. As of the above date afs account holders who have not changed their passwords for over a year will have a 60 day grace period to make a change. Following this date their passwords will become invalid. What does this mean to you? If you have changed your afs password in the past 10 months the only difference is that 60 days before expiration you will receive a warning message. Similar warnings will also appear nearer the time of expiration. If you have not changed your password for more than 10 months, then, as of February 2nd you will have 60 days to change it using the command ‘kpasswd'. Help to choose a good password can be found at: http://security.web.cern.ch/security/passwords/ If you have been given a temporary password at any time by the Helpdesk or registration team this will automatically fall into the expiration category ...

  13. Scoping analysis of the Advanced Test Reactor using SN2ND

    Wolters, E.; Smith, M. (NE NEAMS PROGRAM); ( SC)

    2012-07-26

    A detailed set of calculations was carried out for the Advanced Test Reactor (ATR) using the SN2ND solver of the UNIC code which is part of the SHARP multi-physics code being developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in DOE-NE. The primary motivation of this work is to assess whether high fidelity deterministic transport codes can tackle coupled dynamics simulations of the ATR. The successful use of such codes in a coupled dynamics simulation can impact what experiments are performed and what power levels are permitted during those experiments at the ATR. The advantages of the SN2ND solver over comparable neutronics tools are its superior parallel performance and demonstrated accuracy on large scale homogeneous and heterogeneous reactor geometries. However, it should be noted that virtually no effort from this project was spent constructing a proper cross section generation methodology for the ATR usable in the SN2ND solver. While attempts were made to use cross section data derived from SCALE, the minimal number of compositional cross section sets were generated to be consistent with the reference Monte Carlo input specification. The accuracy of any deterministic transport solver is impacted by such an approach and clearly it causes substantial errors in this work. The reasoning behind this decision is justified given the overall funding dedicated to the task (two months) and the real focus of the work: can modern deterministic tools actually treat complex facilities like the ATR with heterogeneous geometry modeling. SN2ND has been demonstrated to solve problems with upwards of one trillion degrees of freedom which translates to tens of millions of finite elements, hundreds of angles, and hundreds of energy groups, resulting in a very high-fidelity model of the system unachievable by most deterministic transport codes today. A space-angle convergence study was conducted to determine the meshing and angular cubature

  14. Scoping analysis of the Advanced Test Reactor using SN2ND

    A detailed set of calculations was carried out for the Advanced Test Reactor (ATR) using the SN2ND solver of the UNIC code which is part of the SHARP multi-physics code being developed under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program in DOE-NE. The primary motivation of this work is to assess whether high fidelity deterministic transport codes can tackle coupled dynamics simulations of the ATR. The successful use of such codes in a coupled dynamics simulation can impact what experiments are performed and what power levels are permitted during those experiments at the ATR. The advantages of the SN2ND solver over comparable neutronics tools are its superior parallel performance and demonstrated accuracy on large scale homogeneous and heterogeneous reactor geometries. However, it should be noted that virtually no effort from this project was spent constructing a proper cross section generation methodology for the ATR usable in the SN2ND solver. While attempts were made to use cross section data derived from SCALE, the minimal number of compositional cross section sets were generated to be consistent with the reference Monte Carlo input specification. The accuracy of any deterministic transport solver is impacted by such an approach and clearly it causes substantial errors in this work. The reasoning behind this decision is justified given the overall funding dedicated to the task (two months) and the real focus of the work: can modern deterministic tools actually treat complex facilities like the ATR with heterogeneous geometry modeling. SN2ND has been demonstrated to solve problems with upwards of one trillion degrees of freedom which translates to tens of millions of finite elements, hundreds of angles, and hundreds of energy groups, resulting in a very high-fidelity model of the system unachievable by most deterministic transport codes today. A space-angle convergence study was conducted to determine the meshing and angular cubature

  15. 2nd International Open and Distance Learning (IODL Symposium

    Reviewed by Murat BARKAN

    2006-10-01

    Full Text Available This closing remarks prepared and presented by Prof. Dr. Murat BARKAN Anadolu University, Eskisehir, TURKEY DEAR GUESTS, As the 2nd International Open and Distance Learning (IODL Symposium is now drawing to end, I would like to thank you all for your outstanding speeches, distinguished presentations, constructive roundtable and session discussions, and active participation during the last five days. I hope you all share my view that the whole symposium has been a very stimulating and successful experience. Also, on behalf of all the participants, I would like to take this opportunity to thank and congratulate the symposium organization committee for their excellent job in organizing and hosting our 2nd meeting. Throughout the symposium, five workshops, six keynote speeches and 66 papers, which were prepared by more than 150 academicians and practitioners from 23 different countries, reflected remarkable and various views and approaches about open and flexible learning. Besides, all these academic endeavors, 13 educational films were displayed during the symposium. The technology exhibition, hosted by seven companies, was very effective to showcase the current level of the technology and the success of applications of theory into practice. Now I would like to go over what our scholar workshop and keynote presenters shared with us: Prof. Marina McIsaac form Arizona State University dwelled on how to determine research topics worthwhile to be examined and how to choose appropriate research design and methods. She gave us clues on how to get articles published in professional journals. Prof. Colin Latchem from Australia and Prof. Dr. Ali Ekrem Ozkul from Anadolu University pointed to the importance of strategic planning for distance and flexible learning. They highlighted the advantages of strategic planning for policy-makers, planners, managers and staff. Dr. Wolfram Laaser from Fern University of Hagen, presented different multimedia clips and

  16. Availability and production costs of forest biomass as a feedstock for bio ethanol production; Disponibilidad y costos de produccion de biomasa forestal como materia prima para la produccion de bioetanol

    Perez-Verdin, G.; Navar-Chaidez, J. J.; Grebner, D. L.; Soto-Alvarez, C. E.

    2012-07-01

    Forest biomass is a viable alternative to produce ethanol because is abundant, clean, renewable, and can help mitigate greenhouse gas emissions. In this study, a methodology to estimate availability and production costs of forest biomass in forest pines of the state of Durango, Mexico is presented. Forest periodic inventory, forest management plans, and sawmill information were used to estimate forest residues and mill residues, respectively. Since a market for bio ethanol from forest biomass is still not well defined, Monte Carlo simulations were conducted to estimate procurement, transportation, and stumpage costs. Results show that about 322,000 tons can be used to produce up to 38 million of liters of ethanol per year. Of that amount, 66% is forest residues and the rest mill residues. Monte Carlo simulations indicated that the average cost of forest residues is US $23.8 per metric ton (US $0.20 L{sup -}1 ethanol) while the cost for mill residues is US $22.6 per metric ton (US $0.19 L{sup -}1 ethanol). The more important factors in the sensitivity analysis were stumpage costs, technological efficiency, and transportation. The study concluded that in the short term bio ethanol development have to compete with products that use similar raw material such as the pulp, paper and wood-based panels industries and reduce transportation costs. Alternatively, it is recommended the development of integrated bio refineries and the use of more efficient transportation means. (Author) 37 refs.

  17. 2nd international conference on advanced nanomaterials and nanotechnology

    Goswami, D; Perumal, A

    2013-01-01

    Nanoscale science and technology have occupied centre stage globally in modern scientific research and discourses in the early twenty first century. The enabling nature of the technology makes it important in modern electronics, computing, materials, healthcare, energy and the environment. This volume contains selected articles presented (as Invited/Oral/Poster presentations) at the 2nd international conference on advanced materials and nanotechnology (ICANN-2011) held recently at the Indian Institute of Technology Guwahati, during Dec 8-10, 2011. The list of topics covered in this proceedings include: Synthesis and self assembly of nanomaterials Nanoscale characterisation Nanophotonics & Nanoelectronics Nanobiotechnology Nanocomposites  F   Nanomagnetism Nanomaterials for Enery Computational Nanotechnology Commercialization of Nanotechnology The conference was represented by around 400 participants from several countries including delegates invited from USA, Germany, Japan, UK, Taiwan, Italy, Singapor...

  18. Isotope effects on vapour phase 2nd viral coefficients

    Vapor phase 2nd virial coefficient isotope effects (VCIE's) are interpreted. A useful correlation ids developed between -Δ(B-b0)/(B-b0) = -VCIE and the reference condensed phase reduced isotopic partition function ratio [ln(fc/fg)]*. B is the second virial coefficient , b0 = 2πσ3/3, σ is the Lennard-Jones size parameter, and Δ is an isotopic difference, light-heavy. [ln(fc/fg)]* can be obtained from vapor pressure isotope effects for T/TCRITICAL p/f2g), where ln(fp/f2g) is the reduced isotopic partition function ratio describing the equilibrium between monomers and interacting pairs. At temperatures well removed from crossovers in ln(fp/f2g) or [ln(fc/fg)]*, ln(fp/f2g) = (0.4±0.2)[ln(fc/fg)]*. (author)

  19. 2nd International Conference on NeuroRehabilitation

    Andersen, Ole; Akay, Metin

    2014-01-01

    The book is the proceedings of the 2nd International Conference on NeuroRehabilitation (ICNR 2014), held 24th-26th June 2014 in Aalborg, Denmark. The conference featured the latest highlights in the emerging and interdisciplinary field of neural rehabilitation engineering and identified important healthcare challenges the scientific community will be faced with in the coming years. Edited and written by leading experts in the field, the book includes keynote papers, regular conference papers, and contributions to special and innovation sessions, covering the following main topics: neuro-rehabilitation applications and solutions for restoring impaired neurological functions; cutting-edge technologies and methods in neuro-rehabilitation; and translational challenges in neuro-rehabilitation. Thanks to its highly interdisciplinary approach, the book will not only be a  highly relevant reference guide for academic researchers, engineers, neurophysiologists, neuroscientists, physicians and physiotherapists workin...

  20. 2nd Colombian Congress on Computational Biology and Bioinformatics

    Cristancho, Marco; Isaza, Gustavo; Pinzón, Andrés; Rodríguez, Juan

    2014-01-01

    This volume compiles accepted contributions for the 2nd Edition of the Colombian Computational Biology and Bioinformatics Congress CCBCOL, after a rigorous review process in which 54 papers were accepted for publication from 119 submitted contributions. Bioinformatics and Computational Biology are areas of knowledge that have emerged due to advances that have taken place in the Biological Sciences and its integration with Information Sciences. The expansion of projects involving the study of genomes has led the way in the production of vast amounts of sequence data which needs to be organized, analyzed and stored to understand phenomena associated with living organisms related to their evolution, behavior in different ecosystems, and the development of applications that can be derived from this analysis.  .

  1. 2nd International Afro-European Conference for Industrial Advancement

    Wegrzyn-Wolska, Katarzyna; Hassanien, Aboul; Snasel, Vaclav; Alimi, Adel

    2016-01-01

    This volume contains papers presented at the 2nd International Afro-European Conference for Industrial Advancement -- AECIA 2015. The conference aimed at bringing together the foremost experts and excellent young researchers from Africa, Europe and the rest of the world to disseminate the latest results from various fields of engineering, information, and communication technologies. The topics, discussed at the conference, covered a broad range of domains spanning from ICT and engineering to prediction, modeling, and analysis of complex systems. The 2015 edition of AECIA featured a distinguished special track on prediction, modeling and analysis of complex systems -- Nostradamus, and special sessions on Advances in Image Processing and Colorization and Data Processing, Protocols, and Applications in Wireless Sensor Networks.

  2. 2nd CEAS Specialist Conference on Guidance, Navigation and Control

    Mulder, Bob; Choukroun, Daniel; Kampen, Erik-Jan; Visser, Coen; Looye, Gertjan

    2013-01-01

    Following the successful 1st CEAS (Council of European Aerospace Societies) Specialist Conference on Guidance, Navigation and Control (CEAS EuroGNC) held in Munich, Germany in 2011, Delft University of Technology happily accepted the invitation of organizing the 2nd  CEAS EuroGNC in Delft, The Netherlands in 2013. The goal of the conference is to promote new advances in aerospace GNC theory and technologies for enhancing safety, survivability, efficiency, performance, autonomy and intelligence of aerospace systems using on-board sensing, computing and systems. A great push for new developments in GNC are the ever higher safety and sustainability requirements in aviation. Impressive progress was made in new research fields such as sensor and actuator fault detection and diagnosis, reconfigurable and fault tolerant flight control, online safe flight envelop prediction and protection, online global aerodynamic model identification, online global optimization and flight upset recovery. All of these challenges de...

  3. 2nd International Multidisciplinary Microscopy and Microanalysis Congress

    Oral, Ahmet; Ozer, Mehmet

    2015-01-01

    The 2nd International Multidisciplinary Microscopy and Microanalysis Congress & Exhibition (InterM 2014) was held on 16–19 October 2014 in Oludeniz, Fethiye/ Mugla, Turkey. The aim of the congress was to gather scientists from various branches and discuss the latest improvements in the field of microscopy. The focus of the congress has been widened in an "interdisciplinary" manner, so as to allow all scientists working on several related subjects to participate and present their work. These proceedings include 33 peer-reviewed technical papers, submitted by leading academic and research institutions from over 17 countries and representing some of the most cutting-edge research available. The papers were presented at the congress in the following sessions: ·         Applications of Microscopy in the Physical Sciences ·         Applications of Microscopy in the Biological Sciences.

  4. 2nd International Conference on Communication and Computer Engineering

    Othman, Mohd; Othman, Mohd; Rahim, Yahaya; Pee, Naim

    2016-01-01

    This book covers diverse aspects of advanced computer and communication engineering, focusing specifically on industrial and manufacturing theory and applications of electronics, communications, computing and information technology. Experts in research, industry, and academia present the latest developments in technology, describe applications involving cutting-edge communication and computer systems, and explore likely future trends. In addition, a wealth of new algorithms that assist in solving computer and communication engineering problems are presented. The book is based on presentations given at ICOCOE 2015, the 2nd International Conference on Communication and Computer Engineering. It will appeal to a wide range of professionals in the field, including telecommunication engineers, computer engineers and scientists, researchers, academics and students.

  5. 2nd International Conference on Harmony Search Algorithm

    Geem, Zong

    2016-01-01

    The Harmony Search Algorithm (HSA) is one of the most well-known techniques in the field of soft computing, an important paradigm in the science and engineering community.  This volume, the proceedings of the 2nd International Conference on Harmony Search Algorithm 2015 (ICHSA 2015), brings together contributions describing the latest developments in the field of soft computing with a special focus on HSA techniques. It includes coverage of new methods that have potentially immense application in various fields. Contributed articles cover aspects of the following topics related to the Harmony Search Algorithm: analytical studies; improved, hybrid and multi-objective variants; parameter tuning; and large-scale applications.  The book also contains papers discussing recent advances on the following topics: genetic algorithms; evolutionary strategies; the firefly algorithm and cuckoo search; particle swarm optimization and ant colony optimization; simulated annealing; and local search techniques.   This book ...

  6. 2nd International Conference on Construction and Building Research

    Fernández-Plazaola, Igor; Hidalgo-Delgado, Francisco; Martínez-Valenzuela, María; Medina-Ramón, Francisco; Oliver-Faubel, Inmaculada; Rodríguez-Abad, Isabel; Salandin, Andrea; Sánchez-Grandia, Rafael; Tort-Ausina, Isabel; Construction and Building Research

    2014-01-01

    Many areas of knowledge converge in the building industry and therefore research in this field necessarily involves an interdisciplinary approach. Effective research requires strong relations between a broad variety of scientific and technological domains and more conventional construction or craft processes, while also considering advanced management processes, where all the main actors permanently interact. This publication takes an interdisciplinary approach grouping various studies on the building industry chosen from among the works presented for the 2nd International Conference on Construction and Building Research. The papers examine aspects of materials and building systems; construction technology; energy and sustainability; construction management; heritage, refurbishment and conservation. The information contained within these pages may be of interest to researchers and practitioners in construction and building activities from the academic sphere, as well as public and private sectors.

  7. 2nd International Congress on Neurotechnology, Electronics and Informatics

    Encarnação, Pedro

    2016-01-01

    This book is a timely report on current neurotechnology research. It presents a snapshot of the state of the art in the field, discusses current challenges and identifies new directions. The book includes a selection of extended and revised contributions presented at the 2nd International Congress on Neurotechnology, Electronics and Informatics (NEUROTECHNIX 2014), held October 25-26 in Rome, Italy. The chapters are varied: some report on novel theoretical methods for studying neuronal connectivity or neural system behaviour; others report on advanced technologies developed for similar purposes; while further contributions concern new engineering methods and technological tools supporting medical diagnosis and neurorehabilitation. All in all, this book provides graduate students, researchers and practitioners dealing with different aspects of neurotechnologies with a unified view of the field, thus fostering new ideas and research collaborations among groups from different disciplines.

  8. 2nd International Conference on Mobile and Wireless Technology

    Wattanapongsakorn, Naruemon

    2015-01-01

    This book provides a snapshot of the current state-of-the-art in the fields of mobile and wireless technology, security and applications.  The proceedings of the 2nd International Conference on Mobile and Wireless Technology (ICMWT2015), it represents the outcome of a unique platform for researchers and practitioners from academia and industry to share cutting-edge developments in the field of mobile and wireless science technology, including those working on data management and mobile security.   The contributions presented here describe the latest academic and industrial research from the international mobile and wireless community.  The scope covers four major topical areas: mobile and wireless networks and applications; security in mobile and wireless technology; mobile data management and applications; and mobile software.  The book will be a valuable reference for current researchers in academia and industry, and a useful resource for graduate-level students working on mobile and wireless technology...

  9. Book review: Psychology in a work context (2nd Ed.

    Nanette Tredoux

    2003-10-01

    Full Text Available Bergh, Z. & Theron, A.L. (Eds (2003 Psychology in a work context (2nd Ed.. Cape Town: Oxford University Press. This book is an overview and introduction to Industrial and Organisational Psychology. It is a work of ambitious scope, and it is clear that the contributors have invested a great deal of thought and effort in the planning and execution of the book. The current version is the second edition, and it looks set to become one of those standard textbooks that are revised every few years to keep up with changing times. It is a handsome volume, produced to a high standard of editorial care, pleasingly laid out and organised well enough to be useful as an occasional reference source. An English-Afrikaans glossary, tables of contents for every chapter as well as for the entire book, a comprehensive index and extensive bibliography make it easy to retrieve the information relating to a particular topic. Every chapter ends with a conclusion summarising the gist of the material covered. Quality illustrations lighten the tone and help to bring some of the concepts to life. Learning outcomes and self-assessment exercises and questions for every chapter will be useful to the lecturer using the book as a source for a tutored course, and for the student studying by distance learning. If sold at the suggested retail price, the book represents good value compared to imported textbooks that cover similar ground.

  10. PREFACE: 2nd International Symposium "Optics and its Applications"

    Calvo, Maria L.; Dolganova, Irina N.; Gevorgyan, Narine; Guzman, Angela; Papoyan, Aram; Sarkisyan, Hayk; Yurchenko, Stanislav

    2016-01-01

    The ICTP smr2633: 2nd International Symposium "Optics and its Applications" (OPTICS-2014) http://indico.ictp.it/event/a13253/ was held in Yerevan and Ashtarak, Armenia, on 1-5 September 2014. The Symposium was organized by the Abdus Salam International Center for Theoretical Physics (ICTP) with the collaboration of the SPIE Armenian Student Chapter, the Armenian TC of ICO, the Russian-Armenian University (RAU), the Institute for Physical Research of the National Academy of Sciences of Armenia (IPR of NAS), the Greek-Armenian industrial company LT-Pyrkal, and the Yerevan State University (YSU). The Symposium was co-organized by the BMSTU SPIE & OSA student chapters. The International Symposium OPTICS-2014 was dedicated to the 50th anniversary of the Abdus Salam International Center for Theoretical Physics. This symposium "Optics and its Applications" was the First Official ICTP Scientific Event in Armenia. The presentations at OPTICS-2014 were centered on these topics: optical properties of nanostructures; quantum optics & information; singular optics and its applications; laser spectroscopy; strong field optics; nonlinear & ultrafast optics; photonics & fiber optics; optics of liquid crystals; and mathematical methods in optics.

  11. APTWG: 2nd Asia-Pacific Transport Working Group Meeting

    This conference report summarizes the contributions to and discussions at the 2nd Asia-Pacific Transport Working Group Meeting held in Chengdu, China, from 15 to 18 May 2012. The topics of the meeting were organized under five main headings: momentum transport, non-locality in transport, edge turbulence and L–H transition, three-dimensional effects on transport physics, and particle, momentum and heat pinches. It is found that lower hybrid wave and ion cyclotron wave induce co-current rotation while electron cyclotron wave induces counter-current rotation. A four-stage imaging for low (L) to high (H) confinement transition gradually emerges and a more detailed verification is urgently expected. The new edge-localized modes mitigation technique with supersonic molecular beam injection was approved to be effective to some extent on HL-2A and KSTAR. It is also found that low collisionality, trapped electron mode to ion temperature gradient transition (or transition of higher to lower density and temperature gradients), fuelling and lithium coating are in favour of inward pinch of particles in tokamak plasmas. (paper)

  12. Resolution 519/012. It is allowed to R DEL SUR S.A company to generate a wind electricity source by a generating power plant placed in Maldonado province 2nd and 4th Catastral section, as well as the connection to the Interconnected National System

    The Resolution 519 is according to the Electric Wholesale Market regulation and it authorizes the power generation using the wind as the primary source. The company who presented this project was R DEL SUR S.A with the aim to instal a wind power plant in Maldonado province.

  13. Examples to Accompany "Descriptive Cataloging of Rare Books, 2nd Edition."

    Association of Coll. and Research Libraries, Chicago, IL.

    This book is intended to be used with "Descriptive Cataloging of Rare Books," 2nd edition (DCRB) as an illustrative aid to catalogers and others interested in or needing to interpret rare book cataloging. As such, it is to be used in conjunction with the rules it illustrates, both in DCRB and in "Anglo-American Cataloging Rules," 2nd edition…

  14. Development of a Hydrologic Characterization Technology for Fault Zones Phase II 2nd Report

    Karasaki, Kenzi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Doughty, Christine [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Gasperikova, Erika [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Peterson, John [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Conrad, Mark [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Cook, Paul [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tiemi, Onishi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-03-31

    This is the 2nd report on the three-year program of the 2nd phase of the NUMO-LBNL collaborative project: Development of Hydrologic Characterization Technology for Fault Zones under NUMO-DOE/LBNL collaboration agreement. As such, this report is a compendium of the results by Kiho et al. (2011) and those by LBNL.

  15. PREFACE: 2nd National Conference on Nanotechnology 'NANO 2008'

    Czuba, P.; Kolodziej, J. J.; Konior, J.; Szymonski, M.

    2009-03-01

    This issue of Journal of Physics: Conference Series contains selected papers presented at the 2nd National Conference on Nanotechnology 'NANO2008', that was held in Kraków, Poland, 25-28 June 2008. It was organized jointly by the Polish Chemical Society, Polish Physical Society, Polish Vacuum Society, and the Centre for Nanometer-scale Science and Advanced Materials (NANOSAM) of the Jagiellonian University. The meeting presentations were categorized into the following topics: 1. Nanomechanics and nanotribology 2. Characterization and manipulation in nanoscale 3. Quantum effects in nanostructures 4. Nanostructures on surfaces 5. Applications of nanotechnology in biology and medicine 6. Nanotechnology in education 7. Industrial applications of nanotechnology, presentations of the companies 8. Nanoengineering and nanomaterials (international sessions shared with the fellows of Maria-Curie Host Fellowships within the 6th FP of the European Community Project 'Nano-Engineering for Expertise and Development, NEED') 9. Nanopowders 10. Carbon nanostructures and nanosystems 11. Nanoelectronics and nanophotonics 12. Nanomaterials in catalysis 13. Nanospintronics 14. Ethical, social, and environmental aspects of nanotechnology The Conference was attended by 334 participants. The presentations were delivered as 7 invited plenary lectures, 25 invited topical lectures, 78 oral and 108 poster contributions. Only 1/6 of the contributions presented during the Conference were submitted for publication in this Proceedings volume. From the submitted material, this volume of Journal of Physics: Conference Series contains 37 articles that were positively evaluated by independent referees. The Organizing Committee gratefully acknowledges all these contributions. We also thank all the referees of the papers submitted for the Proceedings for their timely and thorough work. We would like to thank all members of the National Program Committee for their work in the selection process of

  16. 2nd interface between ecology and land development in California

    Keeley, Jon E.; Baer-Keeley, Melanie; Fortheringham, C.J.

    2000-01-01

    The 2nd Interface Between Ecology and Land Development Conference was held in association with Earth Day 1997, five years after the first Interface Conference. Rapid population growth in California has intensified the inevitable conflict between land development and preservation of natural ecosystems. Sustainable development requires wise use of diminishing natural resources and, where possible, restoration of damaged landscapes. These Earth Week Celebrations brought together resource managers, scientists, politicians, environmental consultants, and concerned citizens in an effort to improve the communication necessary to maintain our natural biodiversity, ecosystem processes and general quality of life. As discussed by our keynote speaker, Michael Soule, the best predictor of habitat loss is population growth and nowhere is this better illustrated than in California. As urban perimeters expand, the interface between wildlands and urban areas increases. Few problems are more vexing than how to manage the fire prone ecosystems indigenous to California at this urban interface. Today resource managers face increasing challenges of dealing with this problem and the lead-off section of the proceedings considers both the theoretical basis for making decisions related to prescribed burning and the practical application. Habitat fragmentation is an inevitable consequence of development patterns with significant impacts on animal and plant populations. Managers must be increasingly resourceful in dealing with problems of fragmentation and the often inevitable consequences, including susceptibility to invasive oganisms. One approach to dealing with fragmentation problems is through careful landplanning. California is the national leader in the integration of conservation and economics. On Earth Day 1991, Governor Pete Wilson presented an environmental agenda that promised to create between land owners and environmentalists, agreements that would guarantee the protection of

  17. PREFACE: 2nd Workshop on Germanium Detectors and Technologies

    Abt, I.; Majorovits, B.; Keller, C.; Mei, D.; Wang, G.; Wei, W.

    2015-05-01

    The 2nd workshop on Germanium (Ge) detectors and technology was held at the University of South Dakota on September 14-17th 2014, with more than 113 participants from 8 countries, 22 institutions, 15 national laboratories, and 8 companies. The participants represented the following big projects: (1) GERDA and Majorana for the search of neutrinoless double-beta decay (0νββ) (2) SuperCDMS, EDELWEISS, CDEX, and CoGeNT for search of dark matter; (3) TEXONO for sub-keV neutrino physics; (4) AGATA and GRETINA for gamma tracking; (5) AARM and others for low background radiation counting; (5) as well as PNNL and LBNL for applications of Ge detectors in homeland security. All participants have expressed a strong desire on having better understanding of Ge detector performance and advancing Ge technology for large-scale applications. The purpose of this workshop was to leverage the unique aspects of the underground laboratories in the world and the germanium (Ge) crystal growing infrastructure at the University of South Dakota (USD) by brining researchers from several institutions taking part in the Experimental Program to Stimulate Competitive Research (EPSCoR) together with key leaders from international laboratories and prestigious universities, working on the forefront of the intensity to advance underground physics focusing on the searches for dark matter, neutrinoless double-beta decay (0νββ), and neutrino properties. The goal of the workshop was to develop opportunities for EPSCoR institutions to play key roles in the planned world-class research experiments. The workshop was to integrate individual talents and existing research capabilities, from multiple disciplines and multiple institutions, to develop research collaborations, which includes EPSCor institutions from South Dakota, North Dakota, Alabama, Iowa, and South Carolina to support multi-ton scale experiments for future. The topic areas covered in the workshop were: 1) science related to Ge

  18. 76 FR 29750 - Filing Dates for the Nevada Special Election in the 2nd Congressional District

    2011-05-23

    ... General Election on September 13, 2011, to fill the U.S. House seat in ] the 2nd Congressional District... report, the first report must cover all activity that occurred before the committee registered as...

  19. 77 FR 75161 - Filing Dates for the Illinois Special Election in the 2nd Congressional District

    2012-12-19

    ... February 26, 2013, and April 9, 2013, to fill the U.S. House seat in the 2nd Congressional District vacated... not previously filed a report, the first report must cover all activity that occurred before...

  20. 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic

    ... news/fullstory_159807.html 2nd U.S. Case of Bacteria Resistant to Last-Resort Antibiotic Scientists concerned it ... the United States who was infected with a bacteria that is resistant to an antibiotic of last ...

  1. Optimized Pump Power Ratio on 2nd Order Pumping Discrete Raman Amplifier

    Renxiang Huang; Youichi Akasaka; David L. Harris; James Pan

    2003-01-01

    By optimizing pump power ratio between 1st order backward pump and 2nd order forward pump on discrete Raman amplifier, we demonstrated over 2dB noise figure improvement without excessive non-linearity degradation.

  2. Combustion synthesis and characterization of Ba2NdSbO6 nanocrystals

    V T Kavitha; R Jose; S Ramakrishna; P R S Wariar; J Koshy

    2011-07-01

    Nanocrystalline Ba2NdSbO6, a complex cubic perovskite metal oxide, powders were synthesized by a self-sustained combustion method employing citric acid. The product was characterized by X-ray diffraction, differential thermal analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, transmission electron microscopy and scanning electron microscopy. The as-prepared powders were single phase Ba2NdSbO6 and a mixture of polycrystalline spheroidal particles and single crystalline nanorods. The Ba2NdSbO6 sample sintered at 1500°C for 4 h has high density (∼ 95% of theoretical density). Sintered nanocrystalline Ba2NdSbO6 had a dielectric constant of ∼ 21; and dielectric loss = 8 × 10-3 at 5 MHz.

  3. File list: His.Lar.50.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available His.Lar.50.AllAg.2nd_instar dm3 Histone Larvae 2nd instar SRX013015,SRX013042,SRX01...3112,SRX013043,SRX013087,SRX013096 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/His.Lar.50.AllAg.2nd_instar.bed ...

  4. File list: ALL.Lar.10.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available ALL.Lar.10.AllAg.2nd_instar dm3 All antigens Larvae 2nd instar SRX013087,SRX013015,...SRX013112,SRX013042,SRX013043,SRX013096,SRX013113,SRX013016,SRX013114 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.10.AllAg.2nd_instar.bed ...

  5. File list: His.Lar.05.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available His.Lar.05.AllAg.2nd_instar dm3 Histone Larvae 2nd instar SRX013087,SRX013096,SRX01...3043,SRX013015,SRX013112,SRX013042 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/His.Lar.05.AllAg.2nd_instar.bed ...

  6. File list: His.Lar.20.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available His.Lar.20.AllAg.2nd_instar dm3 Histone Larvae 2nd instar SRX013015,SRX013042,SRX01...3112,SRX013043,SRX013096,SRX013087 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/His.Lar.20.AllAg.2nd_instar.bed ...

  7. File list: ALL.Lar.20.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available ALL.Lar.20.AllAg.2nd_instar dm3 All antigens Larvae 2nd instar SRX013015,SRX013042,...SRX013112,SRX013043,SRX013016,SRX013114,SRX013096,SRX013087,SRX013113 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.20.AllAg.2nd_instar.bed ...

  8. File list: ALL.Lar.50.AllAg.2nd_instar [Chip-atlas[Archive

    Full Text Available ALL.Lar.50.AllAg.2nd_instar dm3 All antigens Larvae 2nd instar SRX013015,SRX013042,...SRX013112,SRX013016,SRX013114,SRX013043,SRX013087,SRX013096,SRX013113 http://dbarchive.biosciencedbc.jp/kyushu-u/dm3/assembled/ALL.Lar.50.AllAg.2nd_instar.bed ...

  9. 生物醇醚在炼油-汽油池中的价值工程研究%Study on value engineering of bio-ethanol/ether in oil refining/gasoline pool of China

    张武平; 周山花; 田恒水

    2013-01-01

    Through value analysis of bio-ethanol/ether in clean gasoline developing, it indicated that, compared to direct blending, ethanol etherification (TAEE) could lead 2.5 times effects of olefin reduction, and by introducing FCC light components with higher octane numbers and lower cost through etherification and RVP balance, 15 times relative increment of gasoline pool and 2.5 times relative increment of AKI could be achieved. So the key of raising the value of clean gasoline would be etherification and conversion totality of ethanol. A novel process of composite distillation extraction was suggested by combining with the value analysis of ethyl tert-alkyl ether preparation, which would allow adding excess anhydrous ethanol to raise the conversion of the etherification reaction and could reduce energy consumption by 75% for ethanol concentration recovery by integrating with ETBE/ethanol coupling separation, while, the recovered anhydrous ethanol could be returned to the etherification reactor that would has a positive leverage in developing bio-ethanol/ether fuel and raising oil refining/gasoline pool value.%生物醇醚在中国清洁汽油发展中的价值分析表明,与单位乙醇直接掺混相比,乙醇醚化(TAEE)可取得2.5倍的降烯烃效应,可通过醚化反应和雷德蒸汽压平衡导入较高辛烷值的廉价FCC轻组分获得15倍的汽油池相对增量,相对于90#汽油其抗爆指数的相对增量可达2.5倍,乙醇醚化转化总量是提升清洁汽油价值的关键.结合乙基叔烷基醚制备价值分析提出的改进复合精馏-萃取新工艺,在允许添加过量乙醇以提高醚化转化率的同时,还可集成利用ETBE/乙醇耦合分离的杠杆平衡作用,节省约75%的乙醇增浓回收能耗,并联产获得醚化反应所需的无水乙醇,从而可对生物醇醚燃料发展以及炼油-汽油池价值提升产生积极的杠杆效应.

  10. Severe weather phenomena: SQUALL LINES The case of July 2nd 2009

    Paraschivescu, Mihnea; Tanase, Adrian

    2010-05-01

    The wind intensity plays an important role, among the dangerous meteorological phenomena, to produce negative effects on the economy and the social activities, particularly when the wind is about to turn into a storm. During the past years one can notice an increase of wind frequency and intensity due to climate changes and, consequently, as a result of the extreme meteorological phenomena not only on a planetary level but also on a regional one. Although dangerous meteorological phenomena cannot be avoided, since they are natural, nevertheless they can be anticipated and decision making institutions and mass media can be informed. This is the reason why, in this paper, we set out to identify the synoptic conditions that led to the occurrence of the severe storm case in Bucharest on July 2nd, 2009, as well as the matrices that generate such cases. At the same time we sought to identify some indications evidence especially from radar data so as to lead to the improvement of the time interval between the nowcasting warning and the actual occurrence of the phenomenon.

  11. A Soliton Hierarchy Associated with a Spectral Problem of 2nd Degree in a Spectral Parameter and Its Bi-Hamiltonian Structure

    Yuqin Yao

    2016-01-01

    Full Text Available Associated with so~(3,R, a new matrix spectral problem of 2nd degree in a spectral parameter is proposed and its corresponding soliton hierarchy is generated within the zero curvature formulation. Bi-Hamiltonian structures of the presented soliton hierarchy are furnished by using the trace identity, and thus, all presented equations possess infinitely commuting many symmetries and conservation laws, which implies their Liouville integrability.

  12. Power system economics : the Nordic electricity market. 2nd ed.

    This book written as a textbook for students of engineering is designed for the Norwegian Power Markets course which is part of the Energy and Environment Master's Program and the recently established international MSc program in Electric Power Engineering. As the title indicates, the book deals with both power system economics in general and the practical implementation and experience from the Nordic market. Areas of coverage include: -- Restructuring/deregulation of the power supply system -- Grid access including tariffs and congestion management -- Generation planning -- Market modeling -- Ancillary services -- Regulation of grid monopolies. Although Power Systems Economics is written primarily as a textbook for students, other readers will also find the book interesting. It deals with problems that have been subject of considerable attention in the power sector for some years and it addresses issues that are still relevant and important. (au)

  13. 2nd International Conference on Robot Intelligence Technology and Applications

    Matson, Eric; Myung, Hyun; Xu, Peter; Karray, Fakhri

    2014-01-01

    We are facing a new technological challenge on how to store and retrieve knowledge and manipulate intelligence for autonomous services by intelligent systems which should be capable of carrying out real world tasks autonomously. To address this issue, robot researchers have been developing intelligence technology (InT) for “robots that think” which is in the focus of this book. The book covers all aspects of intelligence from perception at sensor level and reasoning at cognitive level to behavior planning at execution level for each low level segment of the machine. It also presents the technologies for cognitive reasoning, social interaction with humans, behavior generation, ability to cooperate with other robots, ambience awareness, and an artificial genome that can be passed on to other robots. These technologies are to materialize cognitive intelligence, social intelligence, behavioral intelligence, collective intelligence, ambient intelligence and genetic intelligence. The book aims at serving resear...

  14. Monitoring North Korea Explosions: Status and Result of 1st and 2nd Tests (Invited)

    Chi, H.; Lee, H.; Shin, J.; Park, J.; Sheen, D.; Kim, G.; Che, I.; Lim, I.; Kim, T.

    2009-12-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthal full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries, and only stations with the distance of 200 to 550 Km from the test site were considered. Irrespective of azimuthal directions of stations from the test site, the conventional discrimination, Pn/Lg spectral ratio clearly showed that both tests were explosion. But mb-Ms discrimination did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of 1st test, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of 1st and 2nd test data showed that 2nd test site was moved approximately 2 Km westward from 1st site. The cut-off frequencies of P wave of 1st and 2nd tests showed no or negligible difference even though the estimated yield of 2nd test were much larger than that of 1st one. The ratio of 1st and 2nd P-wave amplitudes showed from 2 to 3.1 times. Correspondingly the estimated energy or yield were ranged from 4 to roughly 10 times. KIGAM evaluated the yield of 2nd test were 8 times in the average larger than that of 1st one.

  15. Regional Observations of North Korea Explosions: 1st and 2nd Tests

    Chi, Heon Cheol; Shin, Jin Soo; Lee, Hee-Il; Park, Jung Ho; Sheen, Dong-Hoon; Kim, Geunyoung; Kim, Tea Sung; Che, Il-Young; Lim, In-Seub

    2010-05-01

    Through data exchanging with China, Russia and Japan, KIGAM could monitor North Korea explosion tests in near real time with azimuthally full coverage from the test site. Except for the East Sea (Japan Sea) side, the seismic stations are distributed uniformly along the boundaries of North Korea and adjacent countries. The error ellipses of epicentral determination of test site for 1st and 2nd tests showed almost identical pattern if they were separately calculated with the same configuration of stations. But the combined use of the 1st and the 2nd test data showed that the 2nd test site was moved approximately 2 Km westward from 1st site. The Pn/Lg spectral ratio clearly discriminate these events from two nearby natural earthquakes above 4 Hz. Full moment tensor inversion also indicate the 2nd test had a very large isotropic component. But mb-Ms discrimination, which has been considered one of the most reliable discriminants for separating explosions and earthquakes, did not show apparently the known pattern of explosion for both tests. Body wave magnitude, mb(Pn) of the 2nd test, which was evaluated as 4.5 by KIGAM, varies with directional location of stations widely from 4.1 to 5.2. The magnitude obtained from Lg, mb(Lg), showed narrow variation between 4.3 to 4.7 with the average of 4.5. In the case of both 1st and 2nd tests, both mb(Pn) and mb(Lg) showed equivalently large variation with directional station location. These variations are mainly due to lateral variation of crustal structures surrounding the test site. Remarkably mb(Lg) showed very linear relationship with mb(Pn). By considering attenuation characteristics according to the propagation path, the variations could be effectively reduced. The cut-off frequencies of P wave of both tests showed no or negligible difference even though the estimated yield of the 2nd test were much larger than that of the 1st one. The ratio of P-wave amplitudes of two tests showed from 2 to 3.1 times. Correspondingly the

  16. Advances in Sustainability: Contributions and Outcomes of the 2nd World Sustainability Forum

    Sylvie Flämig

    2013-03-01

    Full Text Available After a successful start in 2011, the 2nd World Sustainability Forum (WSF was held on sciforum.net from 1–30 November 2012. More than 80 papers were presented and over 180 authors contributed to the multidisciplinary conference. The objective of this short report is to sum up the contributions and discussions of the 2nd World Sustainability Forum. It is organized as follows. First, some general information on the Forum is given, then a summary of the contributions to the different sections, as well as providing an overview of the discussions. A final section including an outlook to the 3rd World Sustainability Forum concludes the article.

  17. Advances in Sustainability: Contributions and Outcomes of the 2nd World Sustainability Forum

    Sylvie Flämig; Marc A. Rosen

    2013-01-01

    After a successful start in 2011, the 2nd World Sustainability Forum (WSF) was held on sciforum.net from 1–30 November 2012. More than 80 papers were presented and over 180 authors contributed to the multidisciplinary conference. The objective of this short report is to sum up the contributions and discussions of the 2nd World Sustainability Forum. It is organized as follows. First, some general information on the Forum is given, then a summary of the contributions to the different sections...

  18. Proceedings of the 2nd KUR symposium on hyperfine interactions

    Hyperfine interactions between a nuclear spin and an electronic spin discovered from hyperfine splitting in atomic optical spectra have been utilized not only for the determination of nuclear parameters in nuclear physics but also for novel experimental techniques in many fields such as solid state physics, chemistry, biology, mineralogy and for diagnostic methods in medical science. Experimental techniques based on hyperfine interactions yield information about microscopic states of matter so that they are important in material science. Probes for material research using hyperfine interactions have been nuclei in the ground state and radioactive isotopes prepared with nuclear reactors or particle accelerators. But utilization of muons generated from accelerators is recently growing. Such wide spread application of hyperfine interaction techniques gives rise to some difficulty in collaboration among various research fields. In these circumstances, the present workshop was planned after four years since the last KUR symposium on the same subject. This report summarizes the contributions to the workshop in order to be available for the studies of hyperfine interactions. (J.P.N.)

  19. DOE performance indicators for 2nd quarter CY 1993

    1993-11-01

    The Department of Energy (DOE) has established a Department-wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment, safety, and health (ES&H) performance of the DOE at the Secretary and other management levels. This is the tenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG&G Idaho, Inc. to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The information in this tenth quarterly report, while contributing to a historical database for supporting future trending analysis, does not at this time provide a sound basis for developing trend-related conclusions. In the future, it is expected that trending and analysis of operational data will enhance the safety culture in both DOE and contractor organizations by providing an early warning of deteriorating environment, safety, and health conditions. DOE-STD-1048-92 identifies four general areas of PIs. They are: Personnel Safety, Operational Incidents, Environment, and Management. These four areas have been subdivided into 26 performance indicators. Approximately 115 performance indicator control and distribution charts comprise the body of this report. A brief summary of PIs contained in each of these general areas is provided. The four EG&G facilities whose performance is charted herein are as follows: (1) The Advanced Test Reactor (ATR), (2) The Radioactive Waste Management Complex (RWMC), (3) The Waste Experimental Reduction Facility (WERF), and (4) The Test Reactor Area (TRA) Hot Cells.

  20. 2nd international expert meeting straw power; 2. Internationale Fachtagung Strohenergie

    NONE

    2012-06-15

    Within the 2nd Guelzow expert discussions at 29th to 30th March, 2012 in Berlin (Federal Republic of Germany), the following lectures were held: (1) Promotion of the utilisation of straw in Germany (A. Schuette); (2) The significance of straw in the heat and power generation in EU-27 member states in 2020 and in 2030 under consideration of the costs and sustainability criteria (C. Panoutsou); (3) State of he art of the energetic utilization of hay goods in Europe (D. Thraen); (4) Incineration technological characterisation of straw based on analysis data as well as measured data of large-scale installations (I. Obernberger); (5) Energetic utilization of hay goods in Germany (T. Hering); (6) Actual state of the art towards establishing the first German straw thermal power station (R. Knieper); (7) Straw thermal power plants at agricultural sow farms and poultry farms (H. Heilmann); (8) Country report power from straw in Denmark (A. Evald); (9) Country report power from straw in Poland (J. Antonowicz); (10) Country report power from straw in China (J. Zhang); (11) Energetic utilisation of straw in Czechia (D. Andert); (12) Mobile pelletization of straw (S. Auth); (13) Experiences with the straw thermal power plant from Vattenfall (N. Kirkegaard); (14) Available straw potentials in Germany (potential, straw provision costs) (C. Weiser); (15) Standardization of hay good and test fuels - Classification and development of product standards (M. Englisch); (16) Measures of reduction of emissions at hay good incinerators (V. Lenz); (17) Fermentation of straw - State of the art and perspectives (G. Reinhold); (18) Cellulosis - Ethanol from agricultural residues - Sustainable biofuels (A. Hartmair); (19) Syngas by fermentation of straw (N. Dahmen); (20) Construction using straw (D. Scharmer).

  1. Highlights of the 2nd session of the General Conference

    The debates of the Conference were based on the 'First Annual Report to the General Conference' (GC(n)/39) covering the period 23 October 1957 to 30 June 1958, the 'Programme and Budget for 1959' (GC(H)/36) both submitted by the Board of Governors and on the statement made by the Director General on 22 September 1958 (GC(II)OR. 14) which brought the survey of the Agency's activities up-to-date. Delegates appraised the first year's achievements and many speakers emphasized the importance of close international co-operation in the field of atomic energy and dealt with the role the IAEA was called upon to play. Referring to the offers of various and in particular fissionable materials several delegates supported the statement made by the Director General in his opening address that some preferential treatment must be given the Agency by the offering countries thereby providing some inducement for governments to utilize the channels of true international co-operation. Issues concerning safeguards and reactors were discussed. The Conference finally recommended that the Board of Governors should give earnest and early consideration to initiating action for a survey to be made of the needs of the less developed countries in the matter of nuclear power generation plants, and to the adoption of measures for continuing study regarding the development of technology and economics of small and medium scale nuclear power reactors best suited for less developed countries, and assisting them in planning and implementing their training programmes in that connection. The Conference, finally, voted in favour of the appropriations necessary for the setting up of laboratory facilities. Practically all delegates agreed, although with varying emphasis, on the importance of technical assistance and other activities of the IAEA which would soonest benefit the less advanced countries. The General Conference finally approved by 59 votes, none against and one abstention the Board of Governors

  2. Generation of controller of an underwater robot for constant altitude cruising by self-training. 2nd Report. ; Modification of forward model and adaptation process. Jiko kunren ni yoru kaichu robot no teikodo koko. 2. ; Forward model to controller no chosei hoho no kairyo

    Suto, T.; Ura, T. (The University of Tokyo, Tokyo (Japan). Institute of Industrial Science)

    1993-12-01

    As a guidance system to be applied to constant altitude cruising of the self-controlling underwater robot, improvement of the SONCS (composed from controller network and forward model network) proposed in the previous paper by the author's laboratory is reported. The forward model network was divided into three modules respectively holding a function representing dynamics of the robot and deriving the quantity of state at a next time-step, a function of deriving the data of distance measurement at the next step, and a function of calculating the altitude from the data of distance measurement. A difference type network which represents the output with the increment from the input and a learning method which generates temporary instruction data train from the signals reversely propagating the forward network and thereby adjusts the controller network were introduced. Effectiveness of these three technical improvements was demonstrated based on numerical simulation. 4 refs., 12 figs.

  3. Mash-Up Personal Learning Environments. Proceedings of the 2nd Workshop MUPPLE’09

    Wild, Fridolin; Kalz, Marco; Palmér, Matthias; Müller, Daniel

    2009-01-01

    Wild, F., Kalz, M., Palmér, M., & Müller, D. (Eds.). (2009). Mash-Up Personal Learning Environments. Proceedings of the 2nd Workshop MUPPLE’09. September, 29, 2009, Nice, France: CEUR Workshop Proceedings, online http://sunsite.informatik.rwth-aachen.de/Publications/CEUR-WS/Vol-506/

  4. Proceedings of the 2nd symposium on valves for coal conversion and utilization

    Maxfield, D.A. (ed.)

    1981-01-01

    The 2nd symposium on valves for coal conversion and utilization was held October 15 to 17, 1980. It was sponsored by the US Department of Energy, Morgantown Energy Technology Center, in cooperation with the Valve Manufacturers Association. Seventeen papers have been entered individually into EDB and ERA. (LTN)

  5. Introductory statement to the 2nd scientific forum on sustainable development: A role for nuclear power?

    In his Introductory Statement to the 2nd Scientific Forum on 'Sustainable Development - A Role for Nuclear Power?' (Vienna, 28 September 1999), the Director General of the IAEA focussed on the the main aspects concerning the development of nuclear power: safety, competitiveness, and public support

  6. Proceedings of the 2nd Mediterranean Conference on Information Technology Applications (ITA '97)

    This is the proceedings of the 2nd Mediterranean Conference on Information Technology Applications, held in Nicosia, Cyprus, between 6-7 November, 1997. It contains 16 papers. Two of these fall within the scope of INIS and are dealing with Telemetry, Radiation Monitoring, Environment Monitoring, Radiation Accidents, Air Pollution Monitoring, Diagnosis, Computers, Radiology and Data Processing

  7. The 2nd Global Space Development Summit Held In Washington DC

    Bian Ji

    2009-01-01

    @@ The 2nd Global Space Development Summit,organized by the Center for Strategic and International Studies in partnership with the American Institute of Aeronautics and Astronautics, the Space Foundation and the Chinese Society of Astronautics (CSA), took place in Washington, D.C. On November 12-13.

  8. The Effect of Using Computer Edutainment on Developing 2nd Primary Graders' Writing Skills

    Mohammed Abdel Raheem, Azza Ashraf

    2011-01-01

    The present study attempted to examine the effect of using computer edutainment on developing 2nd graders' writing skills. The study comprised thirty-second year primary stage enrolled in Bani Hamad primary governmental school, Minia governorate. The study adopted the quasi-experimental design. Thirty participants were randomly assigned to one…

  9. Stem cells and cancer immunotherapy: Arrowhead’s 2nd annual cancer immunotherapy conference

    Bot, Adrian; Chiriva-Internati, Maurizio; Cornforth, Andrew; Brian J Czerniecki; Ferrone, Soldano; Geles, Kenneth; Greenberg, Philip D.; Hurt, Elaine; Koya, Richard C.; Masoud H Manjili; Matsui, William; Morgan, Richard A.; Palena, Claudia M; Powell Jr, Daniel J; Restifo, Nicholas P

    2014-01-01

    Investigators from academia and industry gathered on April 4 and 5, 2013, in Washington DC at the Arrowhead’s 2nd Annual Cancer Immunotherapy Conference. Two complementary concepts were discussed: cancer “stem cells” as targets and therapeutic platforms based on stem cells.

  10. 2nd International Congress on Economics and Business – New Economic Trends and Business Opportunities

    ARIK, Nazlı

    2016-01-01

    Abstract. In this study, the evaluation of The 2nd International Congress On Economics And Business: New Economic Trends and Business Opportunities held on May 30- June 3, 2016 in Sarajevo will be mentioned.Keywords. Economics, Economic Trends, Business Opportunities,  Labour Relations, Financial economics.JEL. M10, M20, O10.

  11. Individual Differences In The School Performance of 2nd-Grade Children Born to Low-Income Adolescent Mothers

    Apiwattanalunggarn, Kunlakarn Lekskul; Luster, Tom

    2005-01-01

    The purpose of this study was to investigate factors that contribute to individual differences in the school performance of 2nd-grade children born to adolescent mothers. The sample of this study was 90 low-income adolescent mothers and their children. Data were collected from the adolescent mothers and their first-born children, now in 2nd grade,…

  12. Performance of 2nd Generation BaBar Resistive Plate Chambers

    Anulli, F.; Baldini, R.; Calcaterra, A.; de Sangro, R.; Finocchiaro, G.; Patteri, P.; Piccolo, M.; Zallo, A.; /Frascati; Cheng, C.H.; Lange, D.J.; Wright, D.M.; /LLNL,; Messner, R.; Wisniewski, William J.; /SLAC; Pappagallo, M.; /Bari U. /INFN, Bari; Andreotti, M.; Bettoni, D.; Calabrese, R.; Cibinetto, G.; Luppi, E.; Negrini, M.; /Ferrara; Capra, R.; /Genoa U. /INFN, Genoa /Naples U. /INFN, Naples /Perugia U. /INFN, Perugia /Pisa U. /INFN, Pisa /Rome U. /INFN, Rome /Oregon U. /UC, Riverside

    2005-07-12

    The BaBar detector has operated nearly 200 Resistive Plate Chambers (RPCs), constructed as part of an upgrade of the forward endcap muon detector, for the past two years. The RPCs experience widely different background and luminosity-driven singles rates (0.01-10 Hz/cm{sup 2}) depending on position within the endcap. Some regions have integrated over 0.3 C/cm{sup 2}. RPC efficiency measured with cosmic rays is high and stable. The average efficiency measured with beam is also high. However, a few of the highest rate RPCs have suffered efficiency losses of 5-15%. Although constructed with improved techniques and minimal use of linseed oil, many of the RPCs, which are operated in streamer mode, have shown increased dark currents and noise rates that are correlated with the direction of the gas flow and the integrated current. Studies of the above aging effects are presented and correlated with detector operating conditions.

  13. Utilisation of 2nd generation web technologies in master level vocational teacher training

    Péter Tóth

    2009-03-01

    Full Text Available The Masters level Opportunities and Technological Innovation in Vocational Teacher Education project (project site: http://motivate.tmpk.bmf.hu/ aims to develop the use and management of virtual learning environments in the area of vocational teacher training, drawing on a well established international partnership of institutions providing both technical and educational expertise. This paper gives an overall picture of the first results and products of the collaboration. We touch upon the goals, the assessments and the learning process of using “Multimedia and e-Learning: e-learning methods and tools” module in details. The main cooperative and collaborative devices are presented in virtual learning environment. The communication during collaborative learning, the structured debate on forum and the benefits of collaborative learning in VLE are interpreted at the end of this paper.

  14. Validation of the 2nd Generation Proteasome Inhibitor Oprozomib for Local Therapy of Pulmonary Fibrosis.

    Nora Semren

    Full Text Available Proteasome inhibition has been shown to prevent development of fibrosis in several organs including the lung. However, effects of proteasome inhibitors on lung fibrosis are controversial and cytotoxic side effects of the overall inhibition of proteasomal protein degradation cannot be excluded. Therefore, we hypothesized that local lung-specific application of a novel, selective proteasome inhibitor, oprozomib (OZ, provides antifibrotic effects without systemic toxicity in a mouse model of lung fibrosis. Oprozomib was first tested on the human alveolar epithelial cancer cell line A549 and in primary mouse alveolar epithelial type II cells regarding its cytotoxic effects on alveolar epithelial cells and compared to the FDA approved proteasome inhibitor bortezomib (BZ. OZ was less toxic than BZ and provided high selectivity for the chymotrypsin-like active site of the proteasome. In primary mouse lung fibroblasts, OZ showed significant anti-fibrotic effects, i.e. reduction of collagen I and α smooth muscle actin expression, in the absence of cytotoxicity. When applied locally into the lungs of healthy mice via instillation, OZ was well tolerated and effectively reduced proteasome activity in the lungs. In bleomycin challenged mice, however, locally applied OZ resulted in accelerated weight loss and increased mortality of treated mice. Further, OZ failed to reduce fibrosis in these mice. While upon systemic application OZ was well tolerated in healthy mice, it rather augmented instead of attenuated fibrotic remodelling of the lung in bleomycin challenged mice. To conclude, low toxicity and antifibrotic effects of OZ in pulmonary fibroblasts could not be confirmed for pulmonary fibrosis of bleomycin-treated mice. In light of these data, the use of proteasome inhibitors as therapeutic agents for the treatment of fibrotic lung diseases should thus be considered with caution.

  15. Benchmarking of Modern Data Analysis Tools for a 2nd generation Transient Data Analysis Framework

    Goncalves, Nuno

    2016-01-01

    During the past year of operating the Large Hadron Collider (LHC), the amount of transient accelerator data to be persisted and analysed has been steadily growing. Since the startup of the LHC in 2006, the amount of weekly data storage requirements exceeded what the systems was initially designed to accommodate in a full year of operation. Moreover, it is predicted that the data acquisition rates will continue to increase in the future, due to foreseen improvements in the infrastructure within the scope of the High Luminosity LHC project. Despite the efforts for improving and optimizing the current data storage infrastructures (CERN Accelerator Logging Service and Post Mortem database), some limitations still persist and require a different approach to scale up efficiently to provide efficient services for future machine upgrades. This project aims to explore one of the possibilities among novel solutions proposed to solve the problem of working with large datasets. The configuration is composed of Spark for ...

  16. A 2nd generation static model of greenhouse energy requirements (horticern) : a comparison with dynamic models

    Jolliet, O; Munday, G L

    1989-01-01

    Optimisation of a greenhouse and its components requires a suitable model permitting precise determination of its energy requirements. Existing static models are simple but lack precision; dynamic models though more precise, are unsuitable for use over long periods and difficult to handle in practice. A theoretical study and measurements from the CERN trial greenhouse have allowed the development of new static model named "HORTICERN", precise and easy to use for predicting energy consumption and which takes into account effects of solar energy, wind and radiative loss to the sky. This paper compares the HORTICERN model with the dynamic models of Bot, Takakura, Van Bavel and Gembloux, and demonstrates that its precision is comparable; differences on average being less than 5%, it is independent of type of greenhouse (e.g. single or double glazing, Hortiplus, etc.) and climate. The HORTICERN method has been developed for PC use and is proving to be a powerful tool for greenhouse optimisation by research work...

  17. Validation of the 2nd Generation Proteasome Inhibitor Oprozomib for Local Therapy of Pulmonary Fibrosis

    Semren, Nora; Habel-Ungewitter, Nunja C.; Fernandez, Isis E.; Königshoff, Melanie; Eickelberg, Oliver; Stöger, Tobias; Meiners, Silke

    2015-01-01

    Proteasome inhibition has been shown to prevent development of fibrosis in several organs including the lung. However, effects of proteasome inhibitors on lung fibrosis are controversial and cytotoxic side effects of the overall inhibition of proteasomal protein degradation cannot be excluded. Therefore, we hypothesized that local lung-specific application of a novel, selective proteasome inhibitor, oprozomib (OZ), provides antifibrotic effects without systemic toxicity in a mouse model of lu...

  18. Biomass pyrolysis as an alternative process for the production of 2nd generation biofuels

    Kogdenko, Nadezda

    2010-01-01

    Bio-fuel production from renewable energy sources is the topic that have been studied by scientists and discussed in a political agenda for a couple of decades. In this period of time, however, it was discovered that approaches and technologies used until

  19. The new 2nd-generation laser station at Santiago de Cuba

    Masevich, A. G.; Chepurnov, B. D.; Fundora, M.; del Pino, J.; Kautzleben, H.

    The new laser-radar station at Santiago de Cuba was equipped in cooperation between the Academies of Sciences of the USSR, Cuba and the G.D.R. The system is based on a modified satellite-tracking camera (SBG). Its basic concept and the technical performance are similar to the laser-radar station of the Central Institute for Physics of the Earth, Potsdam. During a first 6-weeks-observation campaign (Dec. 1985 - Jan. 1986), 70 satellite passes (including 40 passes of the geodynamical satellite LAGEOS) were obtained.

  20. Power plant intake quantification of wheat straw composition for 2nd generation bioethanol optimization

    Lomborg, Carina J.; Thomsen, Mette Hedegaard; Jensen, Erik Steen;

    2010-01-01

    (glucan), hemicelluloses (xylan, arabinan), and lignin. Aiming at chemometric multivariate calibration, 44 pre-selected samples were subjected to spectroscopy and reference analysis. For glucan and xylan prediction accuracies (slope: 0.89, 0.94) and precisions (r2: 0.87) were obtained, corresponding to...

  1. Revised data for 2nd version of nuclear criticality safety handbook/data collection

    This paper outlines the data prepared for the 2nd version of Data Collection of the Nuclear Criticality Safety Handbook. These data are discussed in the order of its preliminary table of contents. The nuclear characteristic parameters (k∞, M2, D) were derived, and subcriticality judgment graphs were drawn for eleven kinds of fuels which were often encountered in criticality safety evaluation of fuel cycle facilities. For calculation of criticality data, benchmark calculations using the combination of the continuous energy Monte Carlo criticality code MVP and the Japanese Evaluated Nuclear Data Library JENDL-3.2 were made. The calculation errors were evaluated for this combination. The implementation of the experimental results obtained by using NUCEF facilities into the 2nd version of the Data Collection is under discussion. Therefore, related data were just mentioned. A database is being prepared to retrieve revised data easily. (author)

  2. Analysis of plume oxidation during the air pollution episode of September 2nd 1998

    Harrison, R.M.; Baggot, S.

    2001-08-01

    This study was commissioned by the Environment Agency in order to provide further investigation into the air pollution episode of September 2nd, 1998 which afflicted parts of the Midlands and South Yorkshire. A report by the Environment Agency based upon numerical modelling by the Meteorological Office indicated a number of major industrial facilities as the source of the emissions responsible for the episode. In this report an investigation is made of likely chemical changes during airmass transport and its impact on air composition at ground-level and downwind receptor locations. It is concluded that the measurements of air quality at Nottingham Centre, Stoke on Trent and Birmingham Centre on 2nd September 1998 are consistent with emissions from the sources identified in the Environment Agency report on this episode when allowance is made for oxidation of sulphur and nitrogen oxides within the plume. 3 refs., 9 figs., 9 tabs.

  3. Crystal structures and phase transformation of deuterated lithium imide, Li{sub 2}ND

    Balogh, Michael P. [Chemical and Environmental Sciences Laboratory, General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055 (United States)]. E-mail: michael.p.balogh@gm.com; Jones, Camille Y. [NIST Center for Neutron Research, 100 Bureau Drive, Stop 8562, National Institute of Standards and Technology, Gaithersburg, MD 20899-8562 (United States); Herbst, J.F. [Materials and Processes Laboratory, General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055 (United States); Hector, Louis G. [Materials and Processes Laboratory, General Motors Research and Development Center, 30500 Mound Road, Warren, MI 48090-9055 (United States); Kundrat, Matthew [Aerotek Corp., 26211 Central Park Blvd., Southfield, MI 48076 (United States)

    2006-08-31

    We have investigated the crystal structure of deuterated lithium imide, Li{sub 2}ND, by means of neutron and X-ray diffraction. An order-disorder transition occurs near 360K. Below that temperature Li{sub 2}ND can be described to the same level of accuracy as a disordered cubic (Fd3-bar m) structure with partially occupied Li 32e sites or as a fully occupied orthorhombic (Ima2 or Imm2) structure. The high temperature phase is best characterized as disordered cubic (Fm3-bar m) with D atoms randomized over the 192l sites. Density functional theory calculations complement and support the diffraction analyses. We compare our findings in detail with previous studies.

  4. Crystal structures and phase transformation of deuterated lithium imide, Li2ND

    We have investigated the crystal structure of deuterated lithium imide, Li2ND, by means of neutron and X-ray diffraction. An order-disorder transition occurs near 360K. Below that temperature Li2ND can be described to the same level of accuracy as a disordered cubic (Fd3-bar m) structure with partially occupied Li 32e sites or as a fully occupied orthorhombic (Ima2 or Imm2) structure. The high temperature phase is best characterized as disordered cubic (Fm3-bar m) with D atoms randomized over the 192l sites. Density functional theory calculations complement and support the diffraction analyses. We compare our findings in detail with previous studies

  5. Study on self-medication among 2nd year medical students

    K. Jagadeesh; K. N. Chidananda; Sreenivas P. Revankar; Nagaraja S. Prasad

    2015-01-01

    Background: Self-medication is use of medicines by individuals to treat self-recognized symptoms and illness. Self-medication is a common type of self-care behavior in the general public, but medical students differ in such practice, as they have knowledge about drugs and diseases. Methods: The present study involved 100 2nd year final term medical students in and ldquo;Shivamogga Institute of Medical Sciences, and rdquo; Shivamogga, Karnataka. Study was questionnaire based, and the resul...

  6. Standardization and Innovation The 2nd Shenzhen Hi-tech Standardization Forum Held

    Huang Manxue; Huang Li

    2006-01-01

    @@ "The 2nd Shenzhen Hi-tech Standardization Forum"was fulfilled in Shenzhen Civil Center on November 25th,2005. The forum lasted for two days. There were around 400 delegates from enterprises and standardization organizations participating in this forum. Nine experts from standardization, intellectual property organizations and enterprises made their excellent speeches focusing on the topic "Standardardization and Innovation". All participates agreed that standardization improves innovation efficiently.

  7. Caries correction factors applied to a Punic (6th - 2nd BC) population from Ibiza (Spain)

    Márquez-Grant, N

    2009-01-01

    Caries correction factors were applied to a Punic (6th-2nd century BC) rural sample from the island of Ibiza (Spain). Data obtained on dental caries and ante-mortem tooth loss provided a corrected rate of 12.8% of teeth with caries. This result, in conjunction with other sources of information such as stable isotope analysis and documentary evidence, indicated a diet based on terrestrial protein (mainly carbohydrates) and a low component of marine protein. The paper suggests further research ...

  8. 2006: 2nd Jameson - D.I.T Faculty of Tourism and Food Cocktail Competition

    Murphy, James Peter

    2006-01-01

    The 2nd Jameson - D.I.T Faculty of Tourism and Food Cocktail Competition took place on Thursday November 30th 2006, this initiative between the Faculty of Tourism and Food and Jameson offered over 60 hospitality and bartending students currently studying and working in the hospitality and licensed trade industries the opportunity to improve their skills in creative drinks mixing, in direct response to the growing demand for new cocktails and exciting new drinks to suit every season. Overall p...

  9. Protection of Architectural Heritage in Latvia, the 2nd Half of the 19th Century - 1940

    Mintaurs, Mārtiņš

    2008-01-01

    ANNOTATION The dissertation “Protection of Architectural Heritage in Latvia, the 2nd Half of the 19th Century – 1940” created at the University of Latvia, Department of Archaeology and Ancillary Historical Disciplines of the Faculty of History and Philosophy in 2007 by Martins Mintaurs under the guidance of associated professor Aleksandrs Gavrilins, Dr. hist. The dissertation includes introduction, examination of sources and bibliography, three chapters, conclusion, index of...

  10. Production of artificial ionospheric layers by frequency sweeping near the 2nd gyroharmonic

    Pedersen, T.; M. McCarrick; Reinisch, B.; Watkins, B.; Hamel, R.; Paznukhov, V.

    2011-01-01

    Artificial ionospheric plasmas descending from the background F-region have been observed on multiple occasions at the High Frequency Active Auroral Research Program (HAARP) facility since it reached full 3.6 MW power. Proximity of the transmitter frequency to the 2nd harmonic of the electron gyrofrequency (2fce) has been noted as a requirement for their occurrence, and their disappearance after only a few minutes has been attributed to the increasing...