WorldWideScience

Sample records for 1-w reactor utr-kinki

  1. Dosimetry of fission neutrons in a 1-W reactor, UTR-KINKI

    Endo, S; Yoshitake, Y

    2002-01-01

    The energy spectrum of fission neutrons in the biological irradiation field of the Kinki University reactor, UTR-KINKI, has been determined by a multi-foil activation analysis coupled with artificial neural network techniques and a Au-foil activation method. The mean neutron energy was estimated to be 1.26+-0.05 MeV from the experimentally determined spectrum. Based on this energy value and other information, the neutron dose rate was estimated to be 19.7+-1.4 cGy/hr. Since this dose rate agrees with that measured by a pair of ionizing chambers (21.4 cGy/hr), we conclude that the mean neutron energy could be estimated with reasonable accuracy in the irradiation field of UTR-KINKI. (author)

  2. Operation and utilization experience of UTR-KINKI, a low flux university research reactor

    Kinki University Reactor, UTR-KINKI, is the first and smallest university reactor in Japan. Since 1961, it had been operated at 0.1 W for the first 13 years mainly for teaching and training of university student. It increased its power to 1.0 W in 1974 and thereafter has been operated both for educational and research purposes. General uses of UTR-KINKI are teaching and training of university student, miscellaneous reactor physics experiments, reactor noise analysis, irradiation of wide variety of samples including small animals and maggots of drosophia, neutron radiography, radio-chemistry, radiation chemistry and activation analysis. At present time, it is being operated about 40 days for educational purposes and about 70 days for miscellaneous research uses for one year. Besides these, it has been operated since 1981 for about 80 days per year for visiting researchers from other universities all over Japan. (author)

  3. Some unique activities of the smallest reactor : UTR-KINKI

    In the UTR-KINKI, school teaches trainings are being done, besides utilizations for research and student experiments. In this paper, some details of the school teachers training course are presented. 267 teachers have attended the training since 1987, the beginning of the program. Drastic impacts by the training were recognized in impressions of the attended teachers about nuclear energy. (author)

  4. Education for university students, high school teachers and the general public using the Kinki University Reactor

    Atomic Energy Research Institute of Kinki University is equipped with a nuclear reactor which is called UTR-KINKI. UTR is the abbreviation for University Teaching and Research Reactor. The reactor is the first one installed in Japanese universities. Though the reactor is owned and operated by Kinki University, its use is widely open to scientists and students from other universities and research institutions. The reactor is made the best of teaching instrument for the training of high school teachers. In addition, the reactor is utilized for general public education concerning atomic energy. (author)

  5. Chromosomal mutation by fission neutrons and X-rays in higher plants. A review on results of the joint research program utilizing Kinki University reactor

    We have studied the efficiency of fission neutrons from the nuclear reactor of Kinki University (UTR-KINKI) and X-rays to chromosomes of higher plants for over 20 years. In this review, we described the development of bio-dosimeter using hyper-sensibility of germinating onion roots for irradiation, the analysis of chromosome structure in Haplopappus gracilis (Asteraceae), with the special reference of latent centromeres and survived telomeres throughout chromosomal evolution, the experimental studies on the induction of chromosomal rearrangement in Zebrina pendula (Commelinaceae), the behavior of chromosome fragments with non-localized centromeres in Carex and Eleocharis (Cyperaceae), and the possibility as a bio-dosimeter of pollen mother cells of Tradescantia paludosa (Commelinaceae) for the detection of low-dose radiation. (author)

  6. Electron microscopic studies on the central nervous system of mice irradiated antenatally with low levels of reactor radiation, 1

    Kimura, Yuichiro; Ogawa, Yoshihiro; Yamada, Shinichi; Honda, Yoshihide; Hoshino, Hiroshi; Lian, Shi-Long; Hashimoto, Shozo

    1984-09-01

    To study electron microscopic changes of the central nervous system during development and growth of mice exposed to low levels of reactor radiation using a low power reactor, UTR-KINKI operating at 1 Watt, ICR-mice were irradiated at fetal stage of 14 days after conception with about 20, 40 and 90 cGy, respectively. At the irradiation, 9 pregnant mice in a group were put into a cylindrical plastic cage and were fed only water for irradiation periods of 6-24 hours. The irradiated mice were sacrificed in 1, 3, 6 and 12 months after birth and the brain tissues were treated with an usual method for electron microscopy. No obvious changes were observed on the nerve cells, neuroglia cells and nerve fibers. However, some changes such as electron dense bodies, vacuole formation were observed on the capillaries and their adjacent tissues with increasing in radiation doses as well as with time elapsed. The scanning electron microscopic changes on the capillary walls were also demonstrated in the exposed groups. (author).

  7. Main: 1W1O [RPSD[Archive

    Full Text Available 1W1O トウモロコシ Corn Zea mays L. Cytokinin Dehydrogenase 1 Precursor Name=Ckx1; Zea May...SSVAPNDLARLQEQNRRILRFCDLAGIQYKTYLARHTDRSDWVRHFGAAKWNRFVEMKNKYDPKRLLSPGQDIFN corn_1W1O.jpg ...

  8. Main: 1W1Q [RPSD[Archive

    Full Text Available 1W1Q トウモロコシ Corn Zea mays L. Cytokinin Dehydrogenase 1 Precursor Name=Ckx1; Zea May...SSVAPNDLARLQEQNRRILRFCDLAGIQYKTYLARHTDRSDWVRHFGAAKWNRFVEMKNKYDPKRLLSPGQDIFN corn_1W1Q.jpg ...

  9. Main: 1W1S [RPSD[Archive

    Full Text Available 1W1S トウモロコシ Corn Zea mays L. Cytokinin Dehydrogenase 1 Precursor Name=Ckx1; Zea May...SVAPNDLARLQEQNRRILRFCDLAGIQYKTYLARHTDRSDWVRHFGAAKWNRFVEMKNKYDPKRLLSPGQDIFN corn_1W1S.jpg ...

  10. Main: 1W1R [RPSD[Archive

    Full Text Available 1W1R トウモロコシ Corn Zea mays L. Cytokinin Dehydrogenase 1 Precursor Name=Ckx1; Zea May...LLFSSVAPNDLARLQEQNRRILRFCDLAGIQYKTYLARHTDRSDWVRHFGAAKWNRFVEMKNKYDPKRLLSPGQDIFN corn_1W1R.jpg ...

  11. Main: 1W0I [RPSD[Archive

    Full Text Available Synonym: 3-Ketoacyl-Acyl Carrier Protein Synthase, Mitochondrial Beta-Ketoacyl-Acyl Carrier Protein Synthase; Chai...VIVLEEYEHAKRRGAKIYAELCGYGMSGDAHHITQPPEDGKGAVLAMTRALRQSGLCPNQIDYVNAHATSTPIGDAVEARAI...KTVFSEHATSGTLAFSSTKGATGHLLGAAGAVEAIFSILAIHHGVAPMTLNVKNPDPIFDKRFMPLTTSKKMLVRTAMSNSFGFGGTNASLLFASI arabi_1W0I.jpg ...

  12. Reactors

    Purpose: To provide a spray cooling structure wherein the steam phase in a bwr reactor vessel can sufficiently be cooled and the upper cap and flanges in the vessel can be cooled rapidly which kept from direct contaction with cold water. Constitution: An apertured shielding is provided in parallel spaced apart from the inner wall surface at the upper portion of a reactor vessel equipped with a spray nozzle, and the lower end of the shielding and the inner wall of the vessel are closed to each other so as to store the cooling water. Upon spray cooling, cooling water jetting out from the nozzle cools the vapor phase in the vessel and then hits against the shielding. Then the cooling water mostly falls as it is, while partially enters through the apertures to the back of the shielding plate, abuts against stoppers and falls down. The stoppers are formed in an inverted L shape so that the spray water may not in direct contaction with the inner wall of the vessel. (Horiuchi, T.)

  13. International Training Program on Nuclear Engineering at Kinki University

    Outline of the Training Program: • This training program is a 3-years program since 2013. • This program is conducted with 5 universities’ cooperation: Kyushu Univ., Nagoya Univ., Kyung Hee Univ., Kyoto Univ. and Kinki Univ.; • Education is provided in 3 experimental fields: Kinki Univ. Reactor: UTR-KINKI, Kyung Hee Univ. Reactor: AGN-201K, Reconstruction Support Test Field in Fukushima: RSTF; • The language used in the program is English which is not mother tongue for neither Japanese nor Korean students

  14. Gas production by depressurization from hypothetical Class 1G and Class 1W hydrate reservoirs

    We study gas production from two types of Class 1 deposits: a Class 1G hydrate deposit (gas in the hydrate zone) and a Class 1W hydrate deposit (water in the hydrate zone). During production from these reservoirs, a secondary dissociation front appears at the top of the hydrate interval and advances downward, while the original hydrate interface moves upward. Wellbore heating is important to production from Class 1W accumulations, but does not appear to have a significant effect during production from Class 1G deposits. This study indicates that hydrates make significant contributions to gas production from Class 1 deposits. Over a 20-year period, hydrate dissociation contributes up to 50% of the production rate and up to 38% of the cumulative volume of produced gas in the case of the Class 1G deposits, while the corresponding numbers for the Class 1W reservoir are up to 60% and 32%, respectively. During production, hydrate lenses (bands of alternating high-low hydrate saturation) develop in both Class 1W and Class 1G deposits

  15. Effects of N Concentration on the Tensile and Impact Properties of 9Cr-1W Steels

    These steels are strengthened by both precipitation and solution hardening. The strength increase produced by solution hardening relies on the addition of Cr and W, while precipitation hardening is dependent on the types of precipitates such as M23C6 (M=Cr) and MX (M=V, Ta; X=C, N). High Cr ferritic/martensitic heat resistant steel strengthened by the addition of nitrogen has worked as a structural material for ultra-super critical power generation. However, there are few report on the roles of nitrogen in RAFM steel. The present work aims at investigating the effects of nitrogen addition on the mechanical properties of 9Cr-1W based RAFM steels. The yield strength and ultimate tensile strength of the 9Cr-1W steels are increased with increasing nitrogen contents, which can be attributed to the formation of V-rich MX precipitates. The addition of nitrogen decreases the DBTT of the 9Cr-1W steels, the effect being saturated at nitrogen contents above 0.03 Wt.%. It is concluded that the addition of 0.03-0.05 wt.% nitrogen is beneficial to the mechanical properties of 9Cr-1W steels

  16. Infrared H3+ and CO studies of the galactic core: GCIRS 3 and GCIRS 1W

    We have obtained improved spectra of key fundamental band lines of H3+, R(1, 1) l, R(3, 3) l, and R(2, 2) l, and ro-vibrational transitions of CO on sightlines toward the luminous infrared sources GCIRS 3 and GCIRS 1W, each located in the Central Cluster of the Galactic center within several arcseconds of Sgr A*. The spectra reveal absorption occurring in three kinds of gaseous environments: (1) cold dense and diffuse gas associated with foreground spiral/lateral arms; (2) warm and diffuse gas absorbing over a wide and mostly negative velocity range, which appears to fill a significant fraction of the Galaxy's Central Molecular Zone (CMZ); and (3) warm, dense and compact clouds with velocities near +50 km s–1 probably within 1-2 pc of the center. The absorptions by the first two cloud types are nearly identical for all the sources in the Central Cluster, and are similar to those previously observed on sightlines from Sgr A* to 30 pc east of it. Cloud type (3), which has only been observed toward the Central Cluster, shows distinct differences between the sightlines to GCIRS 3 and GCIRS 1W, which are separated on the sky by only 0.33 pc in projection. We identify this material as part of an inward extension of the circumnuclear disk previously known from HCN mapping. Lower limits on the products of the hydrogen ionization rate ζ and the path length L are 2.3 × 105 cm s–1 and 1.5 × 103 cm s–1 for the warm and diffuse CMZ gas and for the warm and dense clouds in the core, respectively. The limits indicate that the ionization rates in these regions are well above 10–15 s–1.

  17. Infrared H3+ and CO Studies of the Galactic Core: GCIRS 3 and GCIRS 1W

    Goto, Miwa; Indriolo, Nick; Yusef-Zadeh, Farhad; Usuda, Tomonori; Henning, Thomas; Oka, Takeshi

    2014-01-01

    We have obtained improved spectra of key fundamental band lines of H3+, R(1,1)l, R(3,3)l, and R(2,2)l, and ro-vibrational transitions of CO on sightlines toward the luminous infrared sources GCIRS 3 and GCIRS 1W, each located in the Central Cluster of the Galactic center within several arcseconds of Sgr A*. The spectra reveal absorption occurring in three kinds of gaseous environments: (1) cold dense and diffuse gas associated with foreground spiral/lateral arms; (2) warm and diffuse gas absorbing over a wide and mostly negative velocity range, which appears to fill a significant fraction of the Galaxy's Central Molecular Zone (CMZ); and (3) warm, dense and compact clouds with velocities near +50 km s^-1 probably within 1-2 pc of the center. The absorptions by the first two cloud types are nearly identical for all the sources in the Central Cluster, and are similar to those previously observed on sightlines from Sgr A* to 30 pc east of it. Cloud type (3), which has only been observed toward the Central Cluste...

  18. Research reactors in Argentina

    Argentine Nuclear Development started in early fifties. In 1957, it was decided to built the first a research reactor. RA-1 reactor (120 kw, today licensed to work at 40 kW) started operation in January 1958. Originally RA-1 was an Argonaut (American design) reactor. In early sixties, the RA-1 core was changed. Fuel rods (20% enrichment) was introduced instead the old Argonaut core design. For that reason, a critical facility named RA-0 was built. After that, the RA-3 project started, to build a multipurpose 5 MW nuclear reactor MTR pool type, to produce radioisotopes and research. For that reason and to define the characteristics of the RA-3 core, another critical facility was built, RA-2. Initially RA-3 was a 90 % enriched fuel reactor, and started operation in 1967. When Atucha I NPP project started, a German design Power Reactor, a small homogeneous reactor was donated by the German Government to Argentina (1969). This was RA-4 reactor (20% enrichment, 1W). In 1982, RA-6 pool reactor achieved criticality. This is a 500 kW reactor with 90% enriched MTR fuel elements. In 1990, RA-3 started to operate fueled by 20% enriched fuel. In 1997, the RA-8 (multipurpose critical facility located at Pilcaniyeu) started to operate. RA-3 reactor is the most important CNEA reactor for Argentine Research Reactors development. It is the first in a succession of Argentine MTR reactors built by CNEA (and INVAP SE ) in Argentina and other countries: RA-6 (500 kW, Bariloche-Argentina), RP-10 (10MW, Peru), NUR (500 kW, Algeria), MPR (22 MW, Egypt). The experience of Argentinian industry permits to compete with foreign developed countries as supplier of research reactors. Today, CNEA has six research reactors whose activities have a range from education and promotion of nuclear activity, to radioisotope production. For more than forty years, Argentine Research Reactors are working. The experience of Argentine is important, and argentine firms are able to compete in the design and

  19. Nuclear Reactors

    Hogerton, John

    1964-01-01

    This pamphlet describes how reactors work; discusses reactor design; describes research, teaching, and materials testing reactors; production reactors; reactors for electric power generation; reactors for supply heat; reactors for propulsion; reactors for space; reactor safety; and reactors of tomorrow. The appendix discusses characteristics of U.S. civilian power reactor concepts and lists some of the U.S. reactor power projects, with location, type, capacity, owner, and startup date.

  20. Mechanical properties of 9Cr–1W reduced activation ferritic martensitic steel weldment prepared by electron beam welding process

    Highlights: • Width of HAZ is smaller in the 9Cr–1W RAFM weldment prepared by EB process compared to that reported for TIG weldments in literature. • Weld joint is stronger than that of the base metal. • Toughness of weld metal prepared by EB welding process is comparable to that (in PWHT condition) prepared by TIG process. • DBTT of as-welded 9Cr–1W RAFM weldment prepared by EB process is comparable to that reported for TIG weld metal in PWHT condition. - Abstract: Microstructure and mechanical properties of the weldments prepared from 9Cr–1W reduced activation ferritic martensitic (RAFM) steel using electron beam welding (EBW) process were studied. Microstructure consists of tempered lath martensite where precipitates decorating the boundaries in post weld heat treated (PWHT) condition. Lath and precipitate sizes were found to be finer in the weld metal than in base metal. Accordingly, hardness of the weld metal was found to be higher than the base metal. Tensile strength of the cross weldment specimen was 684 MPa, which was comparable with the base metal tensile strength of 670 MPa. On the other hand, DBTT of 9Cr–1W weld metal in as-welded condition is similar to that reported for TIG weld metal in PWHT condition

  1. Early postnatal myelin content estimate of white matter via T1w/T2w ratio

    Lee, Kevin; Cherel, Marie; Budin, Francois; Gilmore, John; Zaldarriaga Consing, Kirsten; Rasmussen, Jerod; Wadhwa, Pathik D.; Entringer, Sonja; Glasser, Matthew F.; Van Essen, David C.; Buss, Claudia; Styner, Martin

    2015-03-01

    To develop and evaluate a novel processing framework for the relative quantification of myelin content in cerebral white matter (WM) regions from brain MRI data via a computed ratio of T1 to T2 weighted intensity values. We employed high resolution (1mm3 isotropic) T1 and T2 weighted MRI from 46 (28 male, 18 female) neonate subjects (typically developing controls) scanned on a Siemens Tim Trio 3T at UC Irvine. We developed a novel, yet relatively straightforward image processing framework for WM myelin content estimation based on earlier work by Glasser, et al. We first co-register the structural MRI data to correct for motion. Then, background areas are masked out via a joint T1w and T2 foreground mask computed. Raw T1w/T2w-ratios images are computed next. For purpose of calibration across subjects, we first coarsely segment the fat-rich facial regions via an atlas co-registration. Linear intensity rescaling based on median T1w/T2w-ratio values in those facial regions yields calibrated T1w/T2wratio images. Mean values in lobar regions are evaluated using standard statistical analysis to investigate their interaction with age at scan. Several lobes have strongly positive significant interactions of age at scan with the computed T1w/T2w-ratio. Most regions do not show sex effects. A few regions show no measurable effects of change in myelin content change within the first few weeks of postnatal development, such as cingulate and CC areas, which we attribute to sample size and measurement variability. We developed and evaluated a novel way to estimate white matter myelin content for use in studies of brain white matter development.

  2. Assessment of a new fabrication route for Fe–9Cr–1W ODS cladding tubes

    Oxide Dispersion Strengthened ferritic/martensitic steels are developed as future cladding materials for Generation IV Sodium-Cooled Fast Reactors. ODS alloys are elaborated by powder metallurgy, consolidated by hot extrusion and manufactured into tube cladding using cold rolling process. ODS steels present low ductility and high hardness at room temperature which complicate their manufacturing. Cold working leads to the hardening of the tube which needs to be softened by heat treatment. A new high temperature fabrication route performed on a Fe–9Cr–1W–Ti–Y2O3-ODS martensitic steel has been designed by following the hardness values, the morphological and crystallographic anisotropy and the nano-precipitation size evolution at each step of the fabrication route. Observations show that phase transformation from ferrite (α) to austenite (γ) is crucial to reduce the morphological and the crystallographic anisotropy induced by the manufacturing processes. The high temperature heat treatments permit to make the austenitic grain grow leading to an improvement of the cold workability. Ultimate Tensile Strength values obtained in the hoop direction remain about 315 MPa at 650 °C which is slightly lower compared to other Fe–9Cr ODS tubes but the new microstructure could be more favorable for creep properties.

  3. Holmium-doped 2.1 μm waveguide chip laser with an output power > 1 W.

    Lancaster, D G; Stevens, V J; Michaud-Belleau, V; Gross, S; Fuerbach, A; Monro, T M

    2015-12-14

    We demonstrate the increasing applicability of compact ultra-fast laser inscribed glass guided-wave lasers and report the highest-power glass waveguide laser with over 1.1 W of output power in monolithic operation in the short-infrared near 2070 nm achieved (51% incident slope efficiency). The holmium doped ZBLAN chip laser is in-band pumped by a 1945 nm thulium fiber laser. When operated in an extended-cavity configuration, over 1 W of output power is realized in a linearly polarized beam. Broad and continuous tunability of the extended-cavity laser is demonstrated from 2004 nm to 2099 nm. Considering its excellent beam quality of M² = 1.08, this laser shows potential as a flexible master oscillator for single frequency and mode-locking applications. PMID:26699055

  4. Femtosecond laser patterning of Ta0.1W0.9O x/ITO thin film stack

    Selective laser patterning of thin films in a multilayered structure is an emerging technology for process development and fabrication of optoelectronics and microelectronics devices. In this work, femtosecond laser patterning of electrochromic Ta0.1W0.9O x film coated on ITO glass has been studied to understand the selective removal mechanism and to determine the optimal parameters for patterning process. A 775 nm Ti:sapphire laser with a pulse duration of 150 fs operating at 1 kHz was used to irradiate the thin film stacks with variations in process parameters such as laser fluence, feedrate and numerical aperture of objective lens. The surface morphologies of the laser irradiated regions have been examined using a scanning electron microscopy and an optical surface profiler. Morphological analysis indicates that the mechanism responsible for the removal of Ta0.1W0.9O x thin films from the ITO glass is a combination of blistering and explosive fracture induced by abrupt thermal expansion. Although the pattern quality is divided into partial removal, complete removal, and ITO film damage, the ITO film surface is slightly melted even at the complete removal condition. Optimal process window, which results in complete removal of Ta0.1W0.9O x thin film without ablation damage in the ITO layer, have been established. From this study, it is found that focusing lens with longer focal length is preferable for damage-free pattern generation and shorter machining time

  5. Complete genome sequence of Burkholderia caribensis Bcrs1W (NBRC110739), a strain co-residing with phenanthrene degrader Mycobacterium sp. EPa45.

    Ohtsubo, Yoshiyuki; Nonoyama, Shouta; Ogawa, Natsumi; Kato, Hiromi; Nagata, Yuji; Tsuda, Masataka

    2016-06-20

    Complete genome sequence of Burkholderia caribensis Bcrs1W, isolated from a phenanthrene-degrading mixed culture, was determined. The genomic information of Bcrs1W will be beneficial to elucidating the mechanisms of its positive effects on phenanthrene degradation by co-residing Mycobacterium sp. Epa45, and to exploiting their degradation potentials. PMID:27130496

  6. Characterization of integrated inductors with one and two YIG layers for low-power converters (1 W)

    Yaya, D. D.; Bechir, M. B.; Youssouf, M. K.; Soultan, M.; Kahlouche, F.; Capraro, S.; Siblini, A.; Chatelon, J. P.; Rousseau, J. J.

    2014-07-01

    These last years, the miniaturization of electronic components allows to increase the number of equipment. Consequently, the realization of integrated inductors with high inductance and low-cost manufacturing is highly desirable. The objective of our work is the characterization of inductors with one or two magnetic layers in order to integrate these components in low-power converters (1W). Extracted parameters show a strong increase of the inductance either by simulation or by measurement according to the magnetic thickness layer. For inductance with two magnetic layers, inductance value is higher when the bottom YIG layer thickness is higher than the top YIG layer thickness.

  7. Characterization of integrated inductors with one and two YIG layers for low-power converters (1 W

    Yaya D.D.

    2014-07-01

    Full Text Available These last years, the miniaturization of electronic components allows to increase the number of equipment. Consequently, the realization of integrated inductors with high inductance and low-cost manufacturing is highly desirable. The objective of our work is the characterization of inductors with one or two magnetic layers in order to integrate these components in low-power converters (1W. Extracted parameters show a strong increase of the inductance either by simulation or by measurement according to the magnetic thickness layer. For inductance with two magnetic layers, inductance value is higher when the bottom YIG layer thickness is higher than the top YIG layer thickness.

  8. Role of combined DWIBS/3D-CE-T1w whole-body MRI in tumor staging: Comparison with PET-CT

    Objectives: To assess the diagnostic performance of whole-body magnetic resonance imaging (WB-MRI) by diffusion-weighted whole-body imaging with background body signal suppression (DWIBS) in malignant tumor detection and the potential diagnostic advantages in generating fused DWIBS/3D-contrast enhanced T1w (3D-CE-T1w) images. Methods: 45 cancer patients underwent 18F-FDG PET-CT and WB-MRI for staging purpose. Fused DWIBS/3D-CE T1w images were generated off-line. 3D-CE-T1w, DWIBS images alone and fused with 3D-CE T1w were compared by two readers groups for detection of primary diseases and local/distant metastases. Diagnostic performance between the three WB-MRI data sets was assessed using receiver operating characteristic (ROC) curve analysis. Imaging exams and histopathological results were used as standard of references. Results: Areas under the ROC curves of DWIBS vs. 3D-CE-T1w vs. both sequences in fused fashion were 0.97, 0.978, and 1.00, respectively. The diagnostic performance in tumor detection of fused DWIBS/3D-CE-T1w images were statistically superior to DWIBS (p < 0.001) and 3D-CE-T1w (p ≤ 0.002); while the difference between DWIBS and 3D-CE-T1w did not show statistical significance difference. Detection rates of malignancy did not differ between WB-MRI with DWIBS and 18F-FDG PET-CT. Conclusion: WB-MRI with DWIBS is to be considered as alternative tool to conventional whole-body methods for tumor staging and during follow-up in cancer patients.

  9. Role of combined DWIBS/3D-CE-T1w whole-body MRI in tumor staging: Comparison with PET-CT

    Manenti, Guglielmo, E-mail: guggi@tiscali.it [Department of Diagnostic and Molecular Imaging, Interventional Radiology and Radiotherapy, University ' Tor Vergata' , PTV Foundation - Policlinic ' Tor Vergata' , Viale Oxford 81, 00133 Rome (Italy); Ciccio, Carmelo, E-mail: carmeciccio@libero.it [Department of Diagnostic and Molecular Imaging, Interventional Radiology and Radiotherapy, University ' Tor Vergata' , PTV Foundation - Policlinic ' Tor Vergata' , Viale Oxford 81, 00133 Rome (Italy); Squillaci, Ettore, E-mail: ettoresquillaci@tiscali.it [Department of Diagnostic and Molecular Imaging, Interventional Radiology and Radiotherapy, University ' Tor Vergata' , PTV Foundation - Policlinic ' Tor Vergata' , Viale Oxford 81, 00133 Rome (Italy); Strigari, Lidia, E-mail: strigari@ifo.it [Laboratory of Medical Physics and Expert Systems, Regina Elena National Cancer Institute, Via Elio Chianesi 53, 00144 Rome (Italy); Calabria, Ferdinando, E-mail: ferdinandocalabria@hotmail.it [Department of Diagnostic and Molecular Imaging, Interventional Radiology and Radiotherapy, University ' Tor Vergata' , PTV Foundation - Policlinic ' Tor Vergata' , Viale Oxford 81, 00133 Rome (Italy); Danieli, Roberta, E-mail: roberta.danieli@ptvonline.it [Department of Diagnostic and Molecular Imaging, Interventional Radiology and Radiotherapy, University ' Tor Vergata' , PTV Foundation - Policlinic ' Tor Vergata' , Viale Oxford 81, 00133 Rome (Italy); and others

    2012-08-15

    Objectives: To assess the diagnostic performance of whole-body magnetic resonance imaging (WB-MRI) by diffusion-weighted whole-body imaging with background body signal suppression (DWIBS) in malignant tumor detection and the potential diagnostic advantages in generating fused DWIBS/3D-contrast enhanced T1w (3D-CE-T1w) images. Methods: 45 cancer patients underwent 18F-FDG PET-CT and WB-MRI for staging purpose. Fused DWIBS/3D-CE T1w images were generated off-line. 3D-CE-T1w, DWIBS images alone and fused with 3D-CE T1w were compared by two readers groups for detection of primary diseases and local/distant metastases. Diagnostic performance between the three WB-MRI data sets was assessed using receiver operating characteristic (ROC) curve analysis. Imaging exams and histopathological results were used as standard of references. Results: Areas under the ROC curves of DWIBS vs. 3D-CE-T1w vs. both sequences in fused fashion were 0.97, 0.978, and 1.00, respectively. The diagnostic performance in tumor detection of fused DWIBS/3D-CE-T1w images were statistically superior to DWIBS (p < 0.001) and 3D-CE-T1w (p {<=} 0.002); while the difference between DWIBS and 3D-CE-T1w did not show statistical significance difference. Detection rates of malignancy did not differ between WB-MRI with DWIBS and 18F-FDG PET-CT. Conclusion: WB-MRI with DWIBS is to be considered as alternative tool to conventional whole-body methods for tumor staging and during follow-up in cancer patients.

  10. Narrow-band 1 W source at 257 nm using frequency quadrupled passively Q-switched Yb:YAG laser.

    Goldberg, Lew; Cole, Brian; McIntosh, Chris; King, Vernon; Hays, A D; Chinn, Stephen R

    2016-07-25

    We describe generation of 1.1 W of 257 nm emission by frequency quadrupling the 1030 nm emission from a compact passively Q-switched Yb:YAG laser. The laser utilized a volume Bragg grating to achieve a 0.1 nm linewidth required for UV-Raman spectroscopic applications, generated 100 kW peak power, 250 μJ pulses and 3.6 W of average power at 1030 nm. Fourth harmonic generation (FHG) was carried out using a 10 mm lithium triborate (LBO) crystal to generate 515 nm second harmonic with 70% conversion efficiency, followed by a 7 mm beta-barium borate (BBO) crystal to generate 257 nm fourth harmonic with 45% efficiency, resulting in an overall nonlinear conversion efficiency of 31%. Far-field and near-field of the FHG emission were characterized. PMID:27464186

  11. Infrared H{sub 3}{sup +} and CO studies of the galactic core: GCIRS 3 and GCIRS 1W

    Goto, Miwa [Universitäts-Sternwarte München, Scheinerstr. 1, D-81679 Munich (Germany); Geballe, T. R. [Gemini Observatory, 670 North A' ohoku Place, Hilo, HI 96720 (United States); Indriolo, Nick [Department of Physics and Astronomy, Johns Hopkins University, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Yusef-Zadeh, Farhad [Department of Physics and Astronomy, Northwestern University, Evanston, IL 60208 (United States); Usuda, Tomonori [Subaru Telescope, 650 North A' ohoku Place, Hilo, HI 96720 (United States); Henning, Thomas [Max-Planck-Institut für Astronomie, Königstuhl 17, D-69117 Heidelberg (Germany); Oka, Takeshi, E-mail: mgoto@usm.lmu.de, E-mail: tgeballe@gemini.edu, E-mail: indriolo@pha.jhu.edu, E-mail: zadeh@northwestern.edu, E-mail: usuda@naoj.org, E-mail: henning@mpia.de, E-mail: t-oka@uchicago.edu [Department of Astronomy and Astrophysics, Department of Chemistry, and Enrico Fermi Institute, University of Chicago, Chicago, IL 60637 (United States)

    2014-05-10

    We have obtained improved spectra of key fundamental band lines of H{sub 3}{sup +}, R(1, 1) {sup l}, R(3, 3) {sup l}, and R(2, 2) {sup l}, and ro-vibrational transitions of CO on sightlines toward the luminous infrared sources GCIRS 3 and GCIRS 1W, each located in the Central Cluster of the Galactic center within several arcseconds of Sgr A*. The spectra reveal absorption occurring in three kinds of gaseous environments: (1) cold dense and diffuse gas associated with foreground spiral/lateral arms; (2) warm and diffuse gas absorbing over a wide and mostly negative velocity range, which appears to fill a significant fraction of the Galaxy's Central Molecular Zone (CMZ); and (3) warm, dense and compact clouds with velocities near +50 km s{sup –1} probably within 1-2 pc of the center. The absorptions by the first two cloud types are nearly identical for all the sources in the Central Cluster, and are similar to those previously observed on sightlines from Sgr A* to 30 pc east of it. Cloud type (3), which has only been observed toward the Central Cluster, shows distinct differences between the sightlines to GCIRS 3 and GCIRS 1W, which are separated on the sky by only 0.33 pc in projection. We identify this material as part of an inward extension of the circumnuclear disk previously known from HCN mapping. Lower limits on the products of the hydrogen ionization rate ζ and the path length L are 2.3 × 10{sup 5} cm s{sup –1} and 1.5 × 10{sup 3} cm s{sup –1} for the warm and diffuse CMZ gas and for the warm and dense clouds in the core, respectively. The limits indicate that the ionization rates in these regions are well above 10{sup –15} s{sup –1}.

  12. A stereotaxic, population-averaged T1w ovine brain atlas including cerebral morphology and tissue volumes

    Björn eNitzsche

    2015-06-01

    Full Text Available Standard stereotaxic reference systems play a key role in human brain studies. Stereotaxic coordinate systems have also been developed for experimental animals including non-human primates, dogs and rodents. However, they are lacking for other species being relevant in experimental neuroscience including sheep. Here, we present a spatial, unbiased ovine brain template with tissue probability maps (TPM that offer a detailed stereotaxic reference frame for anatomical features and localization of brain areas, thereby enabling inter-individual and cross-study comparability. Three-dimensional data sets from healthy adult Merino sheep (Ovis orientalis aries, 12 ewes and 26 neutered rams were acquired on a 1.5T Philips MRI using a T1w sequence. Data were averaged by linear and non-linear registration algorithms. Moreover, animals were subjected to detailed brain volume analysis including examinations with respect to body weight, age and sex. The created T1w brain template provides an appropriate population-averaged ovine brain anatomy in a spatial standard coordinate system. Additionally, TPM for gray (GM and white (WM matter as well as cerebrospinal fluid (CSF classification enabled automatic prior-based tissue segmentation using statistical parametric mapping (SPM. Overall, a positive correlation of GM volume and body weight explained about 15% of the variance of GM while a positive correlation between WM and age was found. Absolute tissue volume differences were not detected, indeed ewes showed significantly more GM per bodyweight as compared to neutered rams. The created framework including spatial brain template and TPM represent a useful tool for unbiased automatic image preprocessing and morphological characterization in sheep. Therefore, the reported results may serve as a starting point for further experimental and/or translational research aiming at in vivo analysis in this species.

  13. N Reactor

    Federal Laboratory Consortium — The last of Hanfordqaodmasdkwaspemas7ajkqlsmdqpakldnzsdflss nine plutonium production reactors to be built was the N Reactor.This reactor was called a dual purpose...

  14. A Note on Indefinite Equation1/x+1/y+1/z +1/w+1/xyzw=0%关于不定方程1/x+1/y+1/z +1/w+1/xyzw=0的一点注记

    管训贵

    2010-01-01

    利用初等方法研究了不定方程1/x+1/y+1/xyzw=1/z+1/w以及1/x+1/y+1/z=1/w+1/xyzw的正整数解问题,分别给出了它们的全部正整数解的公式:(x,y,z,w)=(n+k,n(n+k)-d/k,n2(n+k)2-n(n+k)d-k/kd,n)其中n,k,d为正整数,满足d|n2(n+k)2-k),d<n(n+k)-k,k|(n2-d) ;以及 (x,y,z,w)=(n+k,n(n+k)+d/k,n2(n+k)2+n(n+k)d-k/kd,n),其中n,k,d为正整数,满足 d|(n2(n+k)2-k) ,d<n2(n+k)2-k,k|(n2+d).

  15. Mechanical and microstructural behavior of oxide dispersion strengthened 8Cr-2W and 8Cr-1W steels during creep deformation

    Full text of publication follows: Oxide dispersion strengthened (ODS) steel is a promising candidate for fusion reactor material because of excellent mechanical properties. However, the ODS steel exhibits some defects, such as mechanical anisotropy and little elongation . To reveal details of these defects, we investigated correlations between mechanical and microstructural behavior of ODS ferritic steels during creep deformation at high temperature. The materials used in this study are two kinds of hot rolled ODS steels: Fe-8Cr-2W-0.2V-0.1Ta-0.2Ti-0.4Y2O3 (J1) and Fe-8Cr-1W-0.2Ti-0.4Y2O3 (J2). Creep tests was carried out on specimens sampling along both the rolling direction and the cross direction at 670, 700 and 730 deg. C. Microstructural analyses were made on the normalized and tempered condition by using OM, SEM, TEM and XRD. Creep ruptured and interrupted specimens were also investigated. Both J1 and J2 existed two phases, namely martensite and δ-ferrite which was elongated in the rolling direction. Y-Ti complex oxide particles were finely dispersed in martensite and δ- ferrite phases. Results of creep tests indicated that the time-to-rupture of specimens of J1 were much longer than J2, and the time-to-rupture of specimens sampling along the rolling direction were longer than cross direction. Accordingly, J1 sampling along hot rolling direction was the strongest, for instance, the time-to-rupture was 11400 h at 700 deg. C and 162 MPa. All specimens indicated that elongation was less than 1.3 % and the rupture occurred at steady state creep region from creep curves. Internal cracks were propagated in martensite phase along elongated δ-ferrite phase in the direction of hot rolling. On the other hand, δ-ferrite phases seemed to prevent combining cracks. These results suggest that elongated δ-ferrite and internal clacks in martensite strongly affect on the anisotropy and little elongation of creep. (authors)

  16. Implementation of ultrafast X-ray diffraction at the 1W2B wiggler beamline of Beijing Synchrotron Radiation Facility.

    Sun, Da Rui; Xu, Guang Lei; Zhang, Bing Bing; Du, Xue Yan; Wang, Hao; Li, Qiu Ju; Zhou, Yang Fan; Li, Zhen Jie; Zhang, Yan; He, Jun; Yue, Jun Hui; Lei, Ge; Tao, Ye

    2016-05-01

    The implementation of a laser pump/X-ray probe scheme for performing picosecond-resolution X-ray diffraction at the 1W2B wiggler beamline at Beijing Synchrotron Radiation Facility is reported. With the hybrid fill pattern in top-up mode, a pixel array X-ray detector was optimized to gate out the signal from the singlet bunch with interval 85 ns from the bunch train. The singlet pulse intensity is ∼2.5 × 10(6) photons pulse(-1) at 10 keV. The laser pulse is synchronized to this singlet bunch at a 1 kHz repetition rate. A polycapillary X-ray lens was used for secondary focusing to obtain a 72 µm (FWHM) X-ray spot. Transient photo-induced strain in BiFeO3 film was observed at a ∼150 ps time resolution for demonstration. PMID:27140165

  17. Power distribution and hot channel factor used in Angra 1 (W) and Angra 2,3 (KWU)

    In this report, the definition of hot channel factors and sub-factors used to quantify and qualify the nuclear power distribution and the thermal hydraulic performance of the core for KWU reactor (Angra 2 and 3) and Westinghouse (Angra 1), are presented. Some observations and comparisons are made in relation to the more important differences between criteria and models used in the determination of thermal hydraulic parameters. (author0

  18. Reactor Physics

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised

  19. Reactor Physics

    SCK-CEN's Reactor Physics and MYRRHA Department offers expertise in various areas of reactor physics, in particular in neutron and gamma calculations, reactor dosimetry, reactor operation and control, reactor code benchmarking and reactor safety calculations. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 materials testing reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2001 are summarised

  20. Reactor Physics

    Ait Abderrahim, A

    2001-04-01

    The Reactor Physics and MYRRHA Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis of reactor fuel. This expertise is applied in the Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments by means of neutron and gamma calculations. The activities of the Fuzzy Logic and Intelligent Technologies in Nuclear Science programme cover several domains outside the department. Progress and achievements in these topical areas in 2000 are summarised.

  1. Reactor safeguards

    Russell, Charles R

    2013-01-01

    Reactor Safeguards provides information for all who are interested in the subject of reactor safeguards. Much of the material is descriptive although some sections are written for the engineer or physicist directly concerned with hazards analysis or site selection problems. The book opens with an introductory chapter on radiation hazards, the construction of nuclear reactors, safety issues, and the operation of nuclear reactors. This is followed by separate chapters that discuss radioactive materials, reactor kinetics, control and safety systems, containment, safety features for water reactor

  2. Reactor operation

    Shaw, J

    2013-01-01

    Reactor Operation covers the theoretical aspects and design information of nuclear reactors. This book is composed of nine chapters that also consider their control, calibration, and experimentation.The opening chapters present the general problems of reactor operation and the principles of reactor control and operation. The succeeding chapters deal with the instrumentation, start-up, pre-commissioning, and physical experiments of nuclear reactors. The remaining chapters are devoted to the control rod calibrations and temperature coefficient measurements in the reactor. These chapters also exp

  3. Research Reactors

    Martens, Frederick H. [Argonne National Laboratory; Jacobson, Norman H.

    1968-09-01

    This booklet discusses research reactors - reactors designed to provide a source of neutrons and/or gamma radiation for research, or to aid in the investigation of the effects of radiation on any type of material.

  4. Research reactors

    This article proposes an overview of research reactors, i.e. nuclear reactors of less than 100 MW. Generally, these reactors are used as neutron generators for basic research in matter sciences and for technological research as a support to power reactors. The author proposes an overview of the general design of research reactors in terms of core size, of number of fissions, of neutron flow, of neutron space distribution. He outlines that this design is a compromise between a compact enough core, a sufficient experiment volume, and high enough power densities without affecting neutron performance or its experimental use. The author evokes the safety framework (same regulations as for power reactors, more constraining measures after Fukushima, international bodies). He presents the main characteristics and operation of the two families which represent almost all research reactors; firstly, heavy water reactors (photos, drawings and figures illustrate different examples); and secondly light water moderated and cooled reactors with a distinction between open core pool reactors like Melusine and Triton, pool reactors with containment, experimental fast breeder reactors (Rapsodie, the Russian BOR 60, the Chinese CEFR). The author describes the main uses of research reactors: basic research, applied and technological research, safety tests, production of radio-isotopes for medicine and industry, analysis of elements present under the form of traces at very low concentrations, non destructive testing, doping of silicon mono-crystalline ingots. The author then discusses the relationship between research reactors and non proliferation, and finally evokes perspectives (decrease of the number of research reactors in the world, the Jules Horowitz project)

  5. Reactor physics and reactor computations

    Mathematical methods and computer calculations for nuclear and thermonuclear reactor kinetics, reactor physics, neutron transport theory, core lattice parameters, waste treatment by transmutation, breeding, nuclear and thermonuclear fuels are the main interests of the conference

  6. Reactor container

    Object: To provide a jet and missile protective wall of a configuration being inflated toward the center of a reactor container on the inside of a body of the reactor container disposed within a biological shield wall to thereby increase safety of the reactor container. Structure: A jet and missile protective wall comprised of curved surfaces internally formed with a plurality of arch inflations filled with concrete between inner and outer iron plates and shape steel beam is provided between a reactor container surrounded by a biological shield wall and a thermal shield wall surrounding the reactor pressure vessel, and an adiabatic heat insulating material is filled in space therebetween. (Yoshino, Y.)

  7. Research reactors

    There are currently 284 research reactors in operation, and 12 under construction around the world. Of the operating reactors, nearly two-thirds are used exclusively for research, and the rest for a variety of purposes, including training, testing, and critical assembly. For more than 50 years, research reactor programs have contributed greatly to the scientific and educational communities. Today, six of the world's research reactors are being shut down, three of which are in the USA. With government budget constraints and the growing proliferation concerns surrounding the use of highly enriched uranium in some of these reactors, the future of nuclear research could be impacted

  8. Heterogeneous reactors

    The microscopic study of a cell is meant for the determination of the infinite multiplication factor of the cell, which is given by the four factor formula: K(infinite) = n(epsilon)pf. The analysis of an homogeneous reactor is similar to that of an heterogeneous reactor, but each factor of the four factor formula can not be calculated by the formulas developed in the case of an homogeneous reactor. A great number of methods was developed for the calculation of heterogeneous reactors and some of them are discussed. (Author)

  9. Reactor building

    The whole reactor building is accommodated in a shaft and is sealed level with the earth's surface by a building ceiling, which provides protection against penetration due to external effects. The building ceiling is supported on walls of the reactor building, which line the shaft and transfer the vertical components of forces to the foundations. The thickness of the walls is designed to withstand horizontal pressure waves in the floor. The building ceiling has an opening above the reactor, which must be closed by cover plates. Operating equipment for the reactor can be situated above the building ceiling. (orig./HP)

  10. Plasma reactor

    Molina Mansilla, Ricardo; Erra Serrabasa, Pilar; Bertrán Serra, Enric

    2008-01-01

    [EN] A plasma reactor that can operate in a wide pressure range, from vacuum and low pressures to atmospheric pressure and higher pressures. The plasma reactor is also able to regulate other important settings and can be used for processing a wide range of different samples, such as relatively large samples or samples with rough surfaces.

  11. Reactor physics

    Progress in research on reactor physics in 1997 at the Belgian Nuclear Research Centre SCK/CEN is described. Activities in the following four domains are discussed: core physics, ex-core neutron transport, experiments in Materials Testing Reactors, international benchmarks

  12. Compact Reactor

    Weyl's Gauge Principle of 1929 has been used to establish Weyl's Quantum Principle (WQP) that requires that the Weyl scale factor should be unity. It has been shown that the WQP requires the following: quantum mechanics must be used to determine system states; the electrostatic potential must be non-singular and quantified; interactions between particles with different electric charges (i.e. electron and proton) do not obey Newton's Third Law at sub-nuclear separations, and nuclear particles may be much different than expected using the standard model. The above WQP requirements lead to a potential fusion reactor wherein deuterium nuclei are preferentially fused into helium nuclei. Because the deuterium nuclei are preferentially fused into helium nuclei at temperatures and energies lower than specified by the standard model there is no harmful radiation as a byproduct of this fusion process. Therefore, a reactor using this reaction does not need any shielding to contain such radiation. The energy released from each reaction and the absence of shielding makes the deuterium-plus-deuterium-to-helium (DDH) reactor very compact when compared to other reactors, both fission and fusion types. Moreover, the potential energy output per reactor weight and the absence of harmful radiation makes the DDH reactor an ideal candidate for space power. The logic is summarized by which the WQP requires the above conditions that make the prediction of DDH possible. The details of the DDH reaction will be presented along with the specifics of why the DDH reactor may be made to cause two deuterium nuclei to preferentially fuse to a helium nucleus. The presentation will also indicate the calculations needed to predict the reactor temperature as a function of fuel loading, reactor size, and desired output and will include the progress achieved to date

  13. NEUTRONIC REACTOR

    Anderson, H.L.

    1960-09-20

    A nuclear reactor is described comprising fissionable material dispersed in graphite blocks, helium filling the voids of the blocks and the spaces therebetween, and means other than the helium in thermal conductive contact with the graphite for removing heat.

  14. Nuclear reactors

    This draft chart contains graphical symbols from which the type of (nuclear) reactor can be seen. They will serve as illustrations for graphical sketches. Important features of the individual reactor types are marked out graphically. The user can combine these symbols to characterize a specific reactor type. The basic graphical symbol is a square with a point in the centre. Functional groups can be depicted for closer specification. If two functional groups are not clearly separated, this is symbolized by a dotted line or a channel. Supply and discharge lines for coolant, moderator and fuel are specified in accordance with DIN 2481 and can be further specified by additional symbols if necessary. The examples in the paper show several different reactor types. (orig./AK)

  15. NUCLEAR REACTOR

    Miller, H.I.; Smith, R.C.

    1958-01-21

    This patent relates to nuclear reactors of the type which use a liquid fuel, such as a solution of uranyl sulfate in ordinary water which acts as the moderator. The reactor is comprised of a spherical vessel having a diameter of about 12 inches substantially surrounded by a reflector of beryllium oxide. Conventionnl control rods and safety rods are operated in slots in the reflector outside the vessel to control the operation of the reactor. An additional means for increasing the safety factor of the reactor by raising the ratio of delayed neutrons to prompt neutrons, is provided and consists of a soluble sulfate salt of beryllium dissolved in the liquid fuel in the proper proportion to obtain the result desired.

  16. Multifunctional reactors

    Westerterp, K.R.

    1992-01-01

    Multifunctional reactors are single pieces of equipment in which, besides the reaction, other functions are carried out simultaneously. The other functions can be a heat, mass or momentum transfer operation and even another reaction. Multifunctional reactors are not new, but they have received much emphasis in research in the last decade. A survey is given of modern developments and the first successful applications on a large scale. It is explained why their application in many instances is ...

  17. NUCLEAR REACTOR

    Anderson, C.R.

    1962-07-24

    A fluidized bed nuclear reactor and a method of operating such a reactor are described. In the design means are provided for flowing a liquid moderator upwardly through the center of a bed of pellets of a nentron-fissionable material at such a rate as to obtain particulate fluidization while constraining the lower pontion of the bed into a conical shape. A smooth circulation of particles rising in the center and falling at the outside of the bed is thereby established. (AEC)

  18. Breeder reactors

    The reasons for the development of fast reactors are briefly reviewed (a propitious neutron balance oriented towards a maximum uranium burnup) and its special requirements (cooling, fissile material density and reprocessing) discussed. The three stages in the French program of fast reactor development are outlined with Rapsodie at Cadarache, Phenix at Marcoule, and Super Phenix at Creys-Malville. The more specific features of the program of research and development are emphasized: kinetics and the core, the fuel and the components

  19. Nuclear reactor

    In order to reduce neutron embrittlement of the pressue vessel of an LWR, blanked off elements are fitted at the edge of the reactor core, with the same dimensions as the fuel elements. They are parallel to each other, and to the edge of the reactor taking the place of fuel rods, and are plates of neutron-absorbing material (stainless steel, boron steel, borated Al). (HP)

  20. Optimization of production and properties of the nanoscaled ferritic ODS-alloy 13Cr-1W-0,3Y2O3-0,3TiH2 and characterization of structure and property correlations

    Fusion power reactors next to renewable energy sources shall form an important basis for a future energy scenario avoiding damaging emissions due to the lack of fossil primary energy carriers. An efficient operation of such reactors necessitate temperatures >700 C, which require new kinds of structural materials. Today only reduced activated oxide dispersion-strengthened (ODS-) materials based on iron, which have high strengths at elevated temperatures, offer the possibility to meet those criterias, which are developed in internationally coordinated programs. Therefore a nearly industrial production process based on the powdermetallurgical route is iteratively and systematically optimized to produce the ferritic ODS-alloy 13Cr-1W-0,3Y2O3-0,3TiH2. Through TEM elemental analyses of mechanically alloyed steel powder it is confirmed, that the additives Y2O3 and TiH2 dissolve completely in the powder and form the ODS-particles during the HIP-cycle. Detailed studies of powder contamination during mechanical alloying reveal correlations between the contamination behaviour of certain elements and the milling parameters. A specially designed procedure of powder encapsulation and sealing leads to a successful powder compaction to the ODS-material 13Cr-1W-0,3Y2O3-0,3TiH2. Detailed TEM studies show a bimodal grain size distribution within the material at first. The alloy's recrystallization behaviour is the main reason for this phenomenon and is therefore discussed in detail. A high dispersion of ODS-particles as the decisive material's component with particle sizes von 3-5nm within grains and 12-36nm at the grain boundaries is successfully reached and verified by numerous TEM-Elemental Mappings. By applying hot rolling as an additional step during production a more even grain structure by equally maintaining the fine nanoskaled particle dispersion is set up. The microstructure is highly stable, since no grain- or ODS-particle coarsening occurs during short term heat

  1. Control Rods in high-Flux Swimming-Pool Reactors

    Control-rod problems in open swimming-pool high-flux and high specific power research reactors are examined in the light of the calibrations and experiments made during the construction of the SILOE reactor. Control-rod operating experience for this reactor at 13 MW is also described. 2. The following are considered in turn: (a) Reactivity balances and reactivity values for the different types of rod tested (cadmium, B4C , rare earths and combinations of these different elements). (b) Flux peaks set up in the core by the presence of the control rods, their incidence on the specific power, the fast fluxes that can be obtained and means of increasing them. (c ) The technological problems involved in constructing the rods. (d) In-pile cooling, vibration, deformation and scram-time problems. 3. In conclusion, current studies on control rods in open swimming-pool reactors operating in the 10 - 30 1W range are briefly summarized. (author)

  2. Optimization of production and properties of the nanoscaled ferritic ODS-alloy 13Cr-1W-0,3Y{sub 2}O{sub 3}-0,3TiH{sub 2} and characterization of structure and property correlations; Eigenschaftsoptimierung der nanoskaligen ferritischen ODS-Legierung 13Cr-1W-0,3Y{sub 2}O{sub 3}-0,3TiH{sub 2}, metallkundliche Charakterisierung und Bestimmung von Struktur-Eigenschaftskorrelationen

    Eiselt, Charles Christopher

    2010-01-15

    Fusion power reactors next to renewable energy sources shall form an important basis for a future energy scenario avoiding damaging emissions due to the lack of fossil primary energy carriers. An efficient operation of such reactors necessitate temperatures >700 C, which require new kinds of structural materials. Today only reduced activated oxide dispersion-strengthened (ODS-) materials based on iron, which have high strengths at elevated temperatures, offer the possibility to meet those criterias, which are developed in internationally coordinated programs. Therefore a nearly industrial production process based on the powdermetallurgical route is iteratively and systematically optimized to produce the ferritic ODS-alloy 13Cr-1W-0,3Y{sub 2}O{sub 3}-0,3TiH{sub 2}. Through TEM elemental analyses of mechanically alloyed steel powder it is confirmed, that the additives Y{sub 2}O{sub 3} and TiH{sub 2} dissolve completely in the powder and form the ODS-particles during the HIP-cycle. Detailed studies of powder contamination during mechanical alloying reveal correlations between the contamination behaviour of certain elements and the milling parameters. A specially designed procedure of powder encapsulation and sealing leads to a successful powder compaction to the ODS-material 13Cr-1W-0,3Y{sub 2}O{sub 3}-0,3TiH{sub 2}. Detailed TEM studies show a bimodal grain size distribution within the material at first. The alloy's recrystallization behaviour is the main reason for this phenomenon and is therefore discussed in detail. A high dispersion of ODS-particles as the decisive material's component with particle sizes von 3-5nm within grains and 12-36nm at the grain boundaries is successfully reached and verified by numerous TEM-Elemental Mappings. By applying hot rolling as an additional step during production a more even grain structure by equally maintaining the fine nanoskaled particle dispersion is set up. The microstructure is highly stable, since no grain- or

  3. Research reactors - an overview

    West, C.D.

    1997-03-01

    A broad overview of different types of research and type reactors is provided in this paper. Reactor designs and operating conditions are briefly described for four reactors. The reactor types described include swimming pool reactors, the High Flux Isotope Reactor, the Mark I TRIGA reactor, and the Advanced Neutron Source reactor. Emphasis in the descriptions is placed on safety-related features of the reactors. 7 refs., 7 figs., 2 tabs.

  4. Reactor Neutrinos

    Lasserre, T; Lasserre, Thierry; Sobel, Henry W.

    2005-01-01

    We review the status and the results of reactor neutrino experiments, that toe the cutting edge of neutrino research. Short baseline experiments have provided the measurement of the reactor neutrino spectrum, and are still searching for important phenomena such as the neutrino magnetic moment. They could open the door to the measurement of coherent neutrino scattering in a near future. Middle and long baseline oscillation experiments at Chooz and KamLAND have played a relevant role in neutrino oscillation physics in the last years. It is now widely accepted that a new middle baseline disappearance reactor neutrino experiment with multiple detectors could provide a clean measurement of the last undetermined neutrino mixing angle theta13. We conclude by opening on possible use of neutrinos for Society: NonProliferation of Nuclear materials and Geophysics.

  5. Reactor utilization

    In 1962, the RA reactor was operated almost three times more than in 1961, producing total of 25 555 MWh. Diagram containing comparative data about reactor operation for 1960, 1961, and 1962, percent of fuel used and U-235 burnup shows increase in reactor operation. Number of samples irradiated was 659, number of experiments done was 16. mean powered level was 5.93 MW. Fuel was added into the core twice during the reporting year. In fact the core was increased from 56 to 68 fuel channels and later to 84 fuel channels. Fuel was added to the core when the reactivity worth decreased to the minimum operation level due to burnup. In addition to this 5 central fuel channels were exchanged with fresh fuel in february for the purpose of irradiation in the VISA-2 channel

  6. Nuclear reactors

    A nuclear reactor has a large prompt negative temperature coefficient of reactivity. A reactor core assembly of a plurality of fluid-tight fuel elements is located within a water-filled tank. Each fuel element contains a solid homogeneous mixture of 50-79 w/o zirconium hydride, 20-50 w/o uranium and 0.5-1.5 W erbium. The uranium is not more than 20 percent enriched, and the ratio of hydrogen atoms to zirconium atoms is between 1.5:1 and 7:1. The core has a long lifetime, E.G., at least about 1200 days

  7. Nuclear reactors

    In a liquid cooled nuclear reactor, the combination is described for a single-walled vessel containing liquid coolant in which the reactor core is submerged, and a containment structure, primarily of material for shielding against radioactivity, surrounding at least the liquid-containing part of the vessel with clearance therebetween and having that surface thereof which faces the vessel make compatible with the liquid, thereby providing a leak jacket for the vessel. The structure is preferably a metal-lined concrete vault, and cooling means are provided for protecting the concrete against reaching a temperature at which damage would occur. (U.S.)

  8. Influence of nano-particle coherency degree on the coarsening resistivity of the nano-oxide particles of Fe–14Cr–1W ODS alloys

    Zhong, S.Y., E-mail: shengyi.zhong@sjtu.edu.cn [DSM/IRAMIS/LLB CEA Saclay, 91191 Gif-sur-Yvette (France); Ribis, J.; Lochet, N.; Carlan, Y. de [DMN/SRMA/LTMEx CEA Saclay, 91191 Gif-sur-Yvette (France); Klosek, V.; Mathon, M.H. [DSM/IRAMIS/LLB CEA Saclay, 91191 Gif-sur-Yvette (France)

    2014-12-15

    High chrome oxide dispersion strengthened (ODS) ferritic alloys exhibit a high mechanical resistance at high temperature as well as high resistance to radiation damage due to its high density of Y–Ti–O nano clusters. In order to correlate the coarsening resistance of Fe–14Cr–1W ODS alloys with nano-particle coherency degree and nominal content of Y and Ti, SANS analysis and TEM investigations are used to characterize the size distributions of nano oxides and the interface configuration before and after heat treatment at 1300 °C. The result indicates that the ratio of Ti/Y plays an important role on the coarsening kinetics. The nano oxides of the sample with a high ratio of Ti/Y superior to 1 are more stable owing to the minimizing of the interfacial energy particle/matrix.

  9. Nuclear reactor

    In an improved reactor core for a high conversion BWR reactor, Pu-breeding type BWR type reactor, Pu-breeding type BWR type rector, FEBR type reactor, etc., two types of fuel assemblies are loaded such that fuel assemblies using a channel box of a smaller irradiation deformation ratio are loaded in a high conversion region, while other fuel assemblies are loaded in a burner region. This enables to suppress the irradiation deformation within an allowable limit in the high conversion region where the fast neutron flux is high and the load weight from the inside of the channel box due to the pressure loss is large. At the same time, the irradiation deformation can be restricted within an allowable limit without deteriorating the neutron economy in the burner region in which fast neutron flux is low and the load weight from the inside of the channel box is small since a channel box with smaller neutron absorption cross section or reduced wall thickness is charged. As a result, it is possible to prevent structural deformations such as swelling of the channel box, bending of the entire assemblies, bending of fuel rods, etc. (K.M.)

  10. Reactor building

    The present invention concerns a structure of ABWR-type reactor buildings, which can increase the capacity of a spent fuel storage area at a low cost and improved earthquake proofness. In the reactor building, the floor of a spent fuel pool is made flat, and a depth of the pool water satisfying requirement for shielding is ensured. In addition, a depth of pool water is also maintained for a equipment provisionally storing pool for storing spent fuels, and a capacity for a spent fuel storage area is increased by utilizing surplus space of the equipment provisionally storing pool. Since the flattened floor of the spent fuel pool is flushed with the floor of the equipment provisionally storing pool, transfer of horizontal loads applied to the building upon occurrence of earthquakes is made smooth, to improve earthquake proofness of the building. (T.M.)

  11. Reactor container

    A reactor container has a suppression chamber partitioned by concrete side walls, a reactor pedestal and a diaphragm floor. A plurality of partitioning walls are disposed in circumferential direction each at an interval inside the suppression chamber, so that independent chambers in a state being divided into plurality are formed inside the suppression chamber. The partition walls are formed from the bottom portion of the suppression chamber up to the diaphragm floor to isolate pool water in a divided state. Operation platforms are formed above the suppression chamber and connected to an access port. Upon conducting maintenance, inspection or repairing, a pump is disposed in the independent chamber to transfer pool water therein to one or a plurality of other independent chambers to make it vacant. (I.N.)

  12. Nuclear reactors

    Disclosed is a nuclear reactor cooled by a freezable liquid has a vessel for containing said liquid and comprising a structure shaped as a container, and cooling means in the region of the surface of said structure for effecting freezing of said liquid coolant at and for a finite distance from said surface for providing a layer of frozen coolant on and supported by said surface for containing said liquid coolant. In a specific example, where the reactor is sodium-cooled, the said structure is a metal-lined concrete vault, cooling is effected by closed cooling loops containing NaK, the loops extending over the lined surface of the concrete vault with outward and reverse pipe runs of each loop separated by thermal insulation, and air is flowed through cooling pipes embedded in the concrete behind the metal lining. 7 claims, 3 figures

  13. Nuclear reactor

    The liquid metal (sodium) cooled fast breeder reactor has got fuel subassemblies which are bundled and enclosed by a common can. In order to reduce bending of the sides of the can because of the load caused by the coolant pressure the can has got a dodecagon-shaped crosssection. The surfaces of the can may be of equal width. One out of two surfaces may also be convex towards the center. (RW)

  14. NEUTRONIC REACTORS

    Anderson, J.B.

    1960-01-01

    A reactor is described which comprises a tank, a plurality of coaxial steel sleeves in the tank, a mass of water in the tank, and wire grids in abutting relationship within a plurality of elongated parallel channels within the steel sleeves, the wire being provided with a plurality of bends in the same plane forming adjacent parallel sections between bends, and the sections of adjacent grids being normally disposed relative to each other.

  15. Nuclear reactor

    A detector having high sensitivity to fast neutrons and having low sensitivity to thermal neutrons is disposed for reducing influences of neutron detector signals on detection values of neutron fluxes when the upper end of control rod pass in the vicinity of the neutron flux detector. Namely, the change of the neutron fluxes is greater in the thermal neutron energy region while it is smaller in the fast neutron energy region. This is because the neutron absorbing cross section of B-10 used as neutron absorbers of control rods is greater in the thermal neutron region and it is smaller in the fast neutron region. As a result, increase of the neutron detection signals along with the local neutron flux change can be reduced, and detection signals corresponding to the reactor power can be obtained. Even when gang withdrawal of operating a plurality of control rods at the same time is performed, the reactor operation cycle can be measured accurately, thereby enabling to shorten the reactor startup time. (N.H.)

  16. A basic plan of micro reactor for the promotion of nuclear literacy problems in realization of the reactor

    It is difficult for new sciences and big technologies such as life sciences, nuclear energy, biotechnology, etc. to achieve the appropriate public understanding. One of the issues is the lack of scientific literacy in the public. We propose a new type of nuclear reactor to prepare the opportunity for the public to be acquainted with the information and technology of the nuclear science and engineering. This reactor for interpretation is a symbolic facility adjacent to the scientific and technological museum. Features of the interpretative reactor must be safety and openness. The safety is satisfied by the excess reactivity less than 0.5% Δk/k and little burn up based on the thermal output less than 1 W. (author)

  17. Reactor core of nuclear reactor

    In a BWR type nuclear reactor, the number of first fuel assemblies (uranium) loaded in a reactor core is smaller than that of second fuel assemblies (mixed oxide), the average burnup degree upon take-out of the first fuel assemblies is reduced to less than that of the second fuel assemblies, and the number of the kinds of the fuel rods constituting the first fuel assemblies is made smaller than that of the fuel rods constituting the second fuel assemblies. As a result, the variety of the plutonium enrichment degree is reduced to make the distribution of the axial enrichment degree uniform, thereby enabling to simplify the distribution of the enrichment degree. Then the number of molding fabrication steps for MOX fuel assemblies can be reduced, thereby enabling to reduce the cost for molding and fabrication. (N.H.)

  18. Flow Behavior and Constitutive Equation of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si Titanium Alloy

    Yang, Xuemei; Guo, Hongzhen; Liang, Houquan; Yao, Zekun; Yuan, Shichong

    2016-04-01

    In order to get a reliable constitutive equation for the finite element simulation, flow behavior of Ti-6.5Al-2Sn-4Zr-4Mo-1W-0.2Si alloy under high temperature was investigated by carrying a series of isothermal compression tests at temperatures of 1153-1293 K and strain rates of 0.01-10.0 s-1 on the Gleeble-1500 simulator. Results showed that the true stress-strain curves exhibited peaks at small strains, after which the flow stress decreased monotonically. Ultimately, the flow curves reached steady state at the strain of 0.6, showing a dynamic flow softening phenomenon. The effects of strain rate, temperature, and strain on the flow behavior were researched by establishing a constitutive equation. The relations among stress exponent, deformation activation energy, and strain were preliminarily discussed by using strain rate sensitivity exponent and dynamic recrystallization kinetics curve. Stress values predicted by the modified constitutive equation showed a good agreement with the experimental ones. The correlation coefficient ( R) and average absolute relative error (AARE) were 98.2% and 4.88%, respectively, which confirmed that the modified constitutive equation could give an accurate estimation of the flow stress for BT25y titanium alloy.

  19. 20 000 h reliable operation of 100 µm stripe width 650 nm broad area lasers at more than 1.1 W output power

    Reliability tests for highly efficient high-power 650 nm broad area diode lasers will be presented. The devices have a 5 nm thick single GaInP quantum well as an active layer, which is embedded in AlGaInP waveguide layers and n-AlInP and p-AlGaAs cladding layers. The devices with a stripe width of 100 µm and a cavity length of 1.5 mm were soldered on diamond submounts and mounted on standard C-mounts for an efficient heat removal. The test was performed at a temperature of 15 °C over a first period of 10 000 h at 1.1 W followed by a second period of 10 000 h at 1.2 W. Based on the aging test and assuming a 60% confidence level, the lower limit of the mean time to failure of 87 000 h was determined for the devices

  20. Fast MR Imaging of the Paediatric Abdomen with CAIPIRINHA-Accelerated T1w 3D FLASH and with High-Resolution T2w HASTE: A Study on Image Quality

    Mengxia Li

    2015-01-01

    Full Text Available The aim of this study was to explore the applicability of fast MR techniques to routine paediatric abdominopelvic MRI at 1.5 Tesla. “Controlled Aliasing in Parallel Imaging Results in Higher Acceleration-” (CAIPIRINHA- accelerated contrast-enhanced-T1w 3D FLASH imaging was compared to standard T1w 2D FLASH imaging with breath-holding in 40 paediatric patients and to respiratory-triggered T1w TSE imaging in 10 sedated young children. In 20 nonsedated patients, we compared T2w TIRM to fat-saturated T2w HASTE imaging. Two observers performed an independent and blinded assessment of overall image quality. Acquisition time was reduced by the factor of 15 with CAIPIRINHA-accelerated T1w FLASH and by 7 with T2w HASTE. With CAIPIRINHA and with HASTE, there were significantly less motion artefacts in nonsedated patients. In sedated patients, respiratory-triggered T1w imaging in general showed better image quality. However, satisfactory image quality was achieved with CAIPIRINHA in two sedated patients where respiratory triggering failed. In summary, fast scanning with CAIPIRINHA and HASTE presents a reliable high quality alternative to standard sequences in paediatric abdominal MRI. Paediatric patients, in particular, benefit greatly from fast image acquisition with less breath-hold cycles or shorter sedation.

  1. Types of Nuclear Reactors

    The presentation is based on the following areas: Types of Nuclear Reactors, coolant, moderator, neutron spectrum, fuel type, pressurized water reactor (PWR), boiling water reactor (BWR) reactor pressurized heavy water (PHWR), gas-cooled reactor, RBMK , Nuclear Electricity Generation,Challenges in Nuclear Technology Deployment,EPR, APR1400, A P 1000, A PWR, ATMEA 1, VVER-1000, A PWR, VVER 1200, Boiling Water Reactor, A BWR, A BWR -II, ESBUR, Ke ren, AREVA, Heavy Water Reactor, Candu 6, Acr-1000, HWR, Bw, Iris, CAREM NuCcale, Smart, KLT-HOS, Westinghouse small modular Reactor, Gas Cooled Reactors, PBMR.

  2. Nuclear reactor

    A nuclear reactor is described in which the core components, including fuel-rod assemblies, control-rod assemblies, fertile rod-assemblies, and removable shielding assemblies, are supported by a plurality of separate inlet modular units. These units are referred to as inlet module units to distinguish them from the modules of the upper internals of the reactor. The modular units are supported, each removable independently of the others, in liners in the supporting structure for the lower internals of the reactor. The core assemblies are removably supported in integral receptacles or sockets of the modular units. The liners, units, sockets and assemblies have inlet openings for entry of the fluid. The modular units are each removably mounted in the liners with fluid seals interposed between the opening in the liner and inlet module into which the fluid enters in the upper and lower portion of the liner. Each assembly is similarly mounted in a corresponding receptacle with fluid seals interposed between the openings where the fluid enters in the lower portion of the receptacle or fitting closely in these regions. As fluid flows along each core assembly a pressure drop is produced along the fluid so that the fluid which emerges from each core assembly is at a lower pressure than the fluid which enters the core assembly. However because of the seals interposed in the mountings of the units and assemblies the pressures above and below the units and assemblies are balanced and the units are held in the liners and the assemblies are held in the receptacles by their weights as they have a higher specific gravity than the fluid. The low-pressure spaces between each module and its liner and between each core assembly and its module is vented to the low-pressure regions of the vessel to assure that fluid which leaks through the seals does not accumulate and destroy the hydraulic balance

  3. Nuclear research reactors

    It's presented data about nuclear research reactors in the world, retrieved from the Sien (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: research reactors by countries; research reactors by type; research reactors by fuel and research reactors by purpose. (E.G.)

  4. Nuclear reactor physics course for reactor operators

    The education and training of nuclear reactor operators is important to guarantee the safe operation of present and future nuclear reactors. Therefore, a course on basic 'Nuclear reactor physics' in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The aim of the basic course on 'Nuclear Reactor Physics for reactor operators' is to provide the reactor operators with a basic understanding of the main concepts relevant to nuclear reactors. Seen the education level of the participants, mathematical derivations are simplified and reduced to a minimum, but not completely eliminated

  5. In core gamma dosimetry using thermoluminescence detectors (TLDs) in research reactor

    Since gamma flux co-exists with the neutrons in the reactor core of a research reactor, it becomes difficult to measure exclusively gamma dose rate. Whereas it is quite important to know the gamma dose rates while performing controlled experiments in a research reactor. With this urge experiments have been performed to measure gamma dose rate at central vertical port (CVP) of the University of Florida Training Reactor (UFTR) using thermoluminescence detectors (TLDs). It is demonstrated that among the commercially available TLDs, LiF/sub 2/ can be used to determine the in-core gamma dose rate at low rector power levels (a few hundred watts). The gamma dose rate depending upon reactor power at CVP of UFTR has been determined to be 0.66+- 0.09 Ghy/sup -1/W/sup -1/. Extrapolation of gamma dose higher power is discussed. (author)

  6. Nuclear reactor

    Cover gas spaces for primary coolant vessel, such as a reactor container, a pump vessel and an intermediate heat exchanger vessel are in communication with each other by an inverted U-shaped pressure conduit. A transmitter and a receiver are disposed to the pressure conduit at appropriate positions. If vibration frequencies (pressure vibration) from low frequency to high frequency are generated continuously from the transmitter to the inside of the communication pipe, a resonance phenomenon (air-column resonance oscillation) is caused by the inherent frequency or the like of the communication pipe. The frequency of the air-column resonance oscillation is changed by the inner diameter and the clogged state of the pipelines. Accordingly, by detecting the change of the air-column oscillation characteristics by the receiver, the clogged state of the flow channels in the pipelines can be detected even during the reactor operation. With such procedures, steams of coolants flowing entrained by the cover gases can be prevented from condensation and coagulation at a low temperature portion of the pipelines, otherwise it would lead clogging in the pipelines. (I.N.)

  7. Hybrid adsorptive membrane reactor

    Tsotsis, Theodore T.; Sahimi, Muhammad; Fayyaz-Najafi, Babak; Harale, Aadesh; Park, Byoung-Gi; Liu, Paul K. T.

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  8. Hybrid adsorptive membrane reactor

    Tsotsis, Theodore T. (Inventor); Sahimi, Muhammad (Inventor); Fayyaz-Najafi, Babak (Inventor); Harale, Aadesh (Inventor); Park, Byoung-Gi (Inventor); Liu, Paul K. T. (Inventor)

    2011-01-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  9. Reactor container

    Purpose: To prevent shocks exerted on a vent head due to pool-swell caused within a pressure suppression chamber (disposed in a torus configuration around the dry well) upon loss of coolant accident in BWR type reactors. Constitution: The following relationship is established between the volume V (m3) of a dry well and the ruptured opening area A (m2) at the boundary expected upon loss of coolant accident: V >= 30340 (m) x A Then, the volume of the dry well is made larger than the ruptured open area, that is, the steam flow rate of leaking coolants upon loss of coolant accident to decrease the pressure rise in the dry well at the initial state where loss of coolant accident is resulted. Accordingly, the pressure of non-compressive gases jetted out from the lower end of the downcomer to the pool water is decreased to suppress the pool-swell. (Ikeda, J.)

  10. Department of reactor technology

    The activities of the Department of Reactor Technology at Risoe during 1979 are described. The work is presented in five chapters: Reactor Engineering, Reactor Physics and Dynamics, Heat Transfer and Hydraulics, The DR 1 Reactor, and Non-Nuclear Activities. A list of the staff and of publications is included. (author)

  11. RB reactor noise analysis

    Statistical fluctuations of reactivity represent reactor noise. Analysis of reactor noise enables determining a series of reactor kinetic parameters. Fluctuations of power was measured by ionization chamber placed next to the tank of the RB reactor. The signal was digitized by an analog-digital converter. After calculation of the mean power, 3000 data obtained by sampling were analysed

  12. Survey of research reactors

    A survey of reasearch reactors based on the IAEA Nuclear Research Reactor Data Base (RRDB) was done. This database includes information on 273 operating research reactors ranging in power from zero to several hundred MW. From these 273 operating research reactors 205 reactors have a power level below 5 MW, the remaining 68 reactors range from 5 MW up to several 100 MW thermal power. The major reactor types with common design are: Siemens Unterrichtsreaktors, 1.2 Argonaut reactors, Slowpoke reactors, the miniature neutron source reactors, TRIGA reactors, material testing reactors and high flux reactors. Technical data such as: power, fuel material, fuel type, enrichment, maximum neutron flux density and experimental facilities for each reactor type as well as a description of their utilization in physics and chemistry, medicine and biology, academic research and teaching, training purposes (students and physicists, operating personnel), industrial application (neutron radiography, silicon neutron transmutation doping facilities) are provided. The geographically distribution of these reactors is also shown. As conclusions the author discussed the advantages (low capital cost, low operating cost, low burn up, simple to operate, safe, less restrictive containment and sitting requirements, versatility) and disadvantages (lower sensitivity for NAA, limited radioisotope production, limited use of neutron beams, limited access to the core, licensing) of low power research reactors. 24 figs., refs. 15, Tab. 1 (nevyjel)

  13. Research Nuclear Reactors

    Published in English and in French, this large report first proposes an overview of the use and history of research nuclear reactors. It discusses their definition, and presents the various types of research reactors which can be either related to nuclear power (critical mock-ups, material test reactors, safety test reactors, training reactors, prototypes), or to research (basic research, industry, health), or to specific particle physics phenomena (neutron diffraction, isotope production, neutron activation, neutron radiography, semiconductor doping). It reports the history of the French research reactors by distinguishing the first atomic pile (ZOE), and the activities and achievements during the fifties, the sixties and the seventies. It also addresses the development of instrumentation for research reactors (neutron, thermal, mechanical and fission gas release measurements). The other parts of the report concern the validation of neutronics calculations for different reactors (the EOLE water critical mock-up, the MASURCA air critical mock-up dedicated to fast neutron reactor study, the MINERVE water critical mock-up, the CALIBAN pulsed research reactor), the testing of materials under irradiation (OSIRIS reactor, laboratories associated with research reactors, the Jules Horowitz reactor and its experimental programs and related devices, irradiation of materials with ion beams), the investigation of accident situations (on the CABRI, Phebus, Silene and Jules Horowitz reactors). The last part proposes a worldwide overview of research reactors

  14. Reactor Physics Training

    University courses in nuclear reactor physics at the universities consist of a theoretical description of the physics and technology of nuclear reactors. In order to demonstrate the basic concepts in reactor physics, training exercises in nuclear reactor installations are also desirable. Since the number of reactor facilities is however strongly decreasing in Europe, it becomes difficult to offer to students a means for demonstrating the basic concepts in reactor physics by performing training exercises in nuclear installations. Universities do not generally possess the capabilities for performing training exercises. Therefore, SCK-CEN offers universities the possibility to perform (on a commercial basis) training exercises at its infrastructure consisting of two research reactors (BR1 and VENUS). Besides the organisation of training exercises in the framework of university courses, SCK-CEN also organizes theoretical courses in reactor physics for the education and training of nuclear reactor operators. It is indeed a very important subject to guarantee the safe operation of present and future nuclear reactors. In this framework, an understanding of the fundamental principles of nuclear reactor physics is also necessary for reactor operators. Therefore, the organisation of a basic Nuclear reactor physics course at the level of reactor operators in the initial and continuous training of reactor operators has proven to be indispensable. In most countries, such training also results from the direct request from the safety authorities to assure the high level of competence of the staff in nuclear reactors. The objectives this activity are: (1) to provide training and education activities in reactor physics for university students and (2) to organise courses in nuclear reactor physics for reactor operators

  15. Introduction of Nuclear Reactor Engineering

    This book introduces development, status, supply and demand and resource of nuclear reactor. It deals with basic knowledge of nuclear reactor, which are reactor system, heat recovery in reactor core, structural feature in reactor, materials of structure in reactor, shielding of gamma ray, shielding of reactor, safety and environmental problem of nuclear power plant, nuclear fuel and economical efficiency of nuclear energy.

  16. Safeguarding research reactors

    The report is organized in four sections, including the introduction. The second section contains a discussion of the characteristics and attributes of research reactors important to safeguards. In this section, research reactors are described according to their power level, if greater than 25 thermal megawatts, or according to each fuel type. This descriptive discussion includes both reactor and reactor fuel information of a generic nature, according to the following categories. 1. Research reactors with more than 25 megawatts thermal power, 2. Plate fuelled reactors, 3. Assembly fuelled reactors. 4. Research reactors fuelled with individual rods. 5. Disk fuelled reactors, and 6. Research reactors fuelled with aqueous homogeneous fuel. The third section consists of a brief discussion of general IAEA safeguards as they apply to research reactors. This section is based on IAEA safeguards implementation documents and technical reports that are used to establish Agency-State agreements and facility attachments. The fourth and last section describes inspection activities at research reactors necessary to meet Agency objectives. The scope of the activities extends to both pre and post inspection as well as the on-site inspection and includes the examination of records and reports relative to reactor operation and to receipts, shipments and certain internal transfers, periodic verification of fresh fuel, spent fuel and core fuel, activities related to containment and surveillance, and other selected activities, depending on the reactor

  17. Research nuclear reactors

    Since the divergence of the first nuclear reactor in 1942, about 600 research or test reactors have been built throughout the world. Today 255 research reactors are operating in 57 countries and about 70% are over 25 years old. Whereas there are very few reactor types for power plants because of rationalization and standardisation, there is a great diversity of research reactors. We can divide them into 2 groups: heavy water cooled reactors and light water moderated reactors. Heavy water cooled reactors are dedicated to the production of high flux of thermal neutrons which are extracted from the core by means of neutronic channels. Light water moderated reactors involved pool reactors and slightly pressurized closed reactors, they are polyvalent but their main purposes are material testing, technological irradiations, radionuclide production and neutron radiography. At the moment 8 research reactors are being built in Canada, Germany, Iran, Japan, Kazakhstan, Morocco, Russia and Slovakia and 8 others are planned in 7 countries (France, Indonesia, Nigeria, Russia, Slovakia, Thailand and Tunisia. Different research reactors are described: Phebus, Masurca, Phenix and Petten HFR. The general principles of nuclear safety applied to test reactors are presented. (A.C.)

  18. Nuclear reactor building

    Purpose: To prevent seismic vibrations of external buildings from transmitting to the side walls of a reactor container in a tank type FBR reactor building. Constitution: The reactor building is structured such that the base mat for a reactor container chamber and a reactor container is separated from the base mat for the walls of building, and gas-tight material such as silicon rubber is filled in the gap therebetween. With such a constitution, even if the crane-supporting wall vibrates violently upon occurrence of earthqualkes, the seismic vibrations do not transmit toward the reactor container chamber. (Horiuchi, T.)

  19. Reactor Physics Programme

    The Reactor Physics and Department of SCK-CEN offers expertise in various areas of reactor physics, in particular in neutronics calculations, reactor dosimetry, reactor operation, reactor safety and control and non-destructive analysis on reactor fuel. This expertise is applied within the Reactor Physics and MYRRHA Research Department's own research projects in the VENUS critical facility, in the BR1 reactor and in the MYRRHA project (this project aims at designing a prototype Accelerator Driven System). Available expertise is also used in programmes external to the Department such as the reactor pressure steel vessel programme, the BR2 reactor dosimetry, and the preparation and interpretation of irradiation experiments. Progress and achievements in 1999 in the following areas are reported on: (1) investigations on the use of military plutonium in commercial power reactors; (2) neutron and gamma calculations performed for BR-2 and for other reactors; (3) the updating of neutron and gamma cross-section libraries; (4) the implementation of reactor codes; (6) the management of the UNIX workstations; and (6) fuel cycle studies

  20. Safety Evaluation Report related to the renewal of the operating license for the research reactor at Manhattan College (Docket No. 50-199)

    This Safety Evaluation Report for the application filed by Manhattan College (MC) for a renewal of Operating License R-94 to continue to operate the MC 0.1-W open-pool training reactor has been prepared by the Office of Nuclear Reactor Regulation of the US Nuclear Regulatory Commission. The facility is owned and operated by MC and is located two blocks away from the MC main campus in the Riverdale area of New York City, New York. The staff concludes that the reactor facility can continue to be operated by MC without endangering the health and safety of the public

  1. Undergraduate reactor control experiment

    A sequence of reactor and related experiments has been a central element of a senior-level laboratory course at Pennsylvania State University (Penn State) for more than 20 yr. A new experiment has been developed where the students program and operate a computer controller that manipulates the speed of a secondary control rod to regulate TRIGA reactor power. Elementary feedback control theory is introduced to explain the experiment, which emphasizes the nonlinear aspect of reactor control where power level changes are equivalent to a change in control loop gain. Digital control of nuclear reactors has become more visible at Penn State with the replacement of the original analog-based TRIGA reactor control console with a modern computer-based digital control console. Several TRIGA reactor dynamics experiments, which comprise half of the three-credit laboratory course, lead to the control experiment finale: (a) digital simulation, (b) control rod calibration, (c) reactor pulsing, (d) reactivity oscillator, and (e) reactor noise

  2. Process heat reactors

    The consumption of heat, for industrial and domestic needs, takes up half of the national energy supply; direct utilization of the heat produced by nuclear reactors could therefore contribute to reduce the deficit in the energetic results. The restraints proper to heat consumption (dispersal and variety of consumers, irregular demand) involve the development of the heat transport system structures and adequate nuclear reactors. With this in view, the Commissariat a l'Energie Atomique and Technicatome are developing the CAS reactor series, pressurized water reactors (PWR), (CAS 3G reactor with a power of 420 MW.th.), and the Thermos reactor (100 MW.th.), directly conceived to produce heat at 1200C and whose technology derives from the experimental pool reactors type. In order to prove the value of the Thermos design, an experimental reactor should soon be constructed in the Saclay nuclear research centre

  3. Reactor System Design

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  4. Ship propulsion reactors technology

    This paper takes the state of the art on ship propulsion reactors technology. The french research programs with the corresponding technological stakes, the reactors specifications and advantages are detailed. (A.L.B.)

  5. Nuclear Reactor RA Safety Report, Vol. 11, Reactor operation

    This volume includes the following chapters describing: Organisation of reactor operation (including operational safety, fuel management, and regulatory rules for RA reactor operation); Control and maintenance of reactor components (reactor core, nuclear fuel, heavy water and cover gas systems, mechanical structures, electric power supply system, reactor instrumentation); Quality assurance and Training of the reactor personnel

  6. The Chernobylsk reactor accident

    The construction, the safety philosophy, the major reactor physical parameters of RBMK-1000 type reactor units and the detailed description of the Chernobylsk-4 reactor accident, its causes and conclusions, the efforts to reduce the consequences on the reactor site and in the surroundings are discussed based on different types of Soviet documents including the report presented to the IAEA by the Soviet Atomic Energy Agency in August 1986. (V.N.)

  7. Zero energy reactor 'RB'

    In 1958 the zero energy reactor RB was built with the purpose of enabling critical experiments with various reactor systems to be carried out. The first core assembly built in this reactor consists of heavy water as moderator and natural uranium metal as fuel. In order to be able to obtain very accurate results when measuring the main characteristics of the assembly the reactor was built as a completely bare system. (author)

  8. Fossil nuclear reactors

    Maurette, M.

    1976-01-01

    The discussion of fossil nuclear reactors (the Oklo phenomenon) covers the earth science background, neutron-induced isotopes and reactor operating conditions, radiation-damage studies, and reactor modeling. In conclusion possible future studies are suggested and the significance of the data obtained in past studies is summarized. (JSR)

  9. High solids fermentation reactor

    Wyman, Charles E.; Grohmann, Karel; Himmel, Michael E.; Richard, Christopher J.

    1993-01-01

    A fermentation reactor and method for fermentation of materials having greater than about 10% solids. The reactor includes a rotatable shaft along the central axis, the shaft including rods extending outwardly to mix the materials. The reactor and method are useful for anaerobic digestion of municipal solid wastes to produce methane, for production of commodity chemicals from organic materials, and for microbial fermentation processes.

  10. Fusion reactor studies

    A review is given of fusion reactor systems studies, the objectives of these studies are outlined and some recent conceptual reactor designs are described. The need for further studies in greater depth is indicated so that progress towards a commercial fusion reactor may be consolidated. (U.K.)

  11. Reactor power measuring device

    The present invention provides a self-powered long detector having a sensitivity over the entire length of a reactor core as an entire control rod withdrawal range of a BWR type reactor, and a reactor power measuring device using a gamma ray thermometer which scarcely causes sensitivity degradation. That is, a hollow protection pipe is disposed passing through the reactor core from the outside of a reactor pressure vessel. The self-powered long detectors and the gamma ray thermometers are inserted and installed in the protection pipe. An average reactor power in an axial direction of the reactor relative to a certain position in the horizontal cross section of the reactor core is determined based on the power of the self-powered long detector over the entire length of the reactor core. Since the response of the self-powered detector relative to a local power change is rapid, the output is used as an input signal to a safety protection device of the reactor core. Further, a gamma ray thermometer secured in the reactor and having scarce sensitivity degradation is used instead of an incore travelling neutron monitor used for relative calibration of an existent neutron monitor secured in the reactor. (I.S.)

  12. Nuclear reactor repairing device

    Purpose: To enable free repairing of an arbitrary position in an LMFBR reactor. Constitution: A laser light emitted from a laser oscillator installed out of a nuclear reactor is guided into a portion to be repaired in the reactor by using a reflecting mirror, thereby welding or cutting it. The guidance of the laser out of the reactor into the reactor is performed by an extension tube depending into a through hole of a rotary plug, and the guidance of the laser light into a portion to be repaired is performed by the transmitting and condensing action of the reflecting mirror. (Kamimura, M.)

  13. Light water reactor safety

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  14. Nuclear reactor physics

    Stacey, Weston M

    2010-01-01

    Nuclear reactor physics is the core discipline of nuclear engineering. Nuclear reactors now account for a significant portion of the electrical power generated worldwide, and new power reactors with improved fuel cycles are being developed. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. The second edition of this successful comprehensive textbook and reference on basic and advanced nuclear reactor physics has been completely updated, revised and enlarged to include the latest developme

  15. Fundamentals of reactor chemistry

    In the Nuclear Engineering School of JAERI, many courses are presented for the people working in and around the nuclear reactors. The curricula of the courses contain also the subject material of chemistry. With reference to the foreign curricula, a plan of educational subject material of chemistry in the Nuclear Engineering School of JAERI was considered, and the fundamental part of reactor chemistry was reviewed in this report. Since the students of the Nuclear Engineering School are not chemists, the knowledge necessary in and around the nuclear reactors was emphasized in order to familiarize the students with the reactor chemistry. The teaching experience of the fundamentals of reactor chemistry is also given. (author)

  16. Generation III+ Reactor Portfolio

    While the power generation needs of utilities are unique and diverse, they are all faced with the double challenge of meeting growing electricity needs while curbing CO2 emissions. To answer these diverse needs and help tackle this challenge, AREVA has developed several reactor models which are briefly described in this document: The EPRTM Reactor: designed on the basis of the Konvoi (Germany) and N4 (France) reactors, the EPRTM reactor is an evolutionary model designed to achieve best-in-class safety and operational performance levels. The ATMEA1TM reactor: jointly designed by Mitsubishi Heavy Industries and AREVA through ATMEA, their common company. This reactor design benefits from the competencies and expertise of the two mother companies, which have commissioned close to 130 reactor units. The KERENATM reactor: Designed on the basis of the most recent German BWR reactors (Gundremmingen) the KERENATM reactor relies on proven technology while also including innovative, yet thoroughly tested, features. The optimal combination of active and passive safety systems for a boiling water reactor achieves a very low probability of severe accident

  17. Spinning fluids reactor

    Miller, Jan D; Hupka, Jan; Aranowski, Robert

    2012-11-20

    A spinning fluids reactor, includes a reactor body (24) having a circular cross-section and a fluid contactor screen (26) within the reactor body (24). The fluid contactor screen (26) having a plurality of apertures and a circular cross-section concentric with the reactor body (24) for a length thus forming an inner volume (28) bound by the fluid contactor screen (26) and an outer volume (30) bound by the reactor body (24) and the fluid contactor screen (26). A primary inlet (20) can be operatively connected to the reactor body (24) and can be configured to produce flow-through first spinning flow of a first fluid within the inner volume (28). A secondary inlet (22) can similarly be operatively connected to the reactor body (24) and can be configured to produce a second flow of a second fluid within the outer volume (30) which is optionally spinning.

  18. The Maple reactor project

    MDS Nordion supplies the majority of the world's reactor-produced medical isotopes. These isotopes are currently produced in the NRU reactor at AECL's Chalk River Laboratories (CRL). Medical isotopes and related technology are relied upon around the world to prevent, diagnose and treat disease. The NRU reactor, which has played a key role in supplying medical isotopes to date, has been in operation for over 40 years. Replacing this aging reactor has been a priority for MDS Nordion to assure the global nuclear medicine community that Canada will continue to be a dependable supplier of medical isotopes. MDS Nordion contracted AECL to construct two MAPLE reactors dedicated to the production of medical isotopes. The MDS Nordion Medical Isotope Reactor (MMIR) project started in September 1996. This paper describes the MAPLE reactors that AECL has built at its CRL site, and will operate for MDS Nordion. (author)

  19. High temperature reactors

    With the advent of high temperature reactors, nuclear energy, in addition to producing electricity, has shown enormous potential for the production of alternate transport energy carrier such as hydrogen. High efficiency hydrogen production processes need process heat at temperatures around 1173-1223 K. Bhabha Atomic Research Centre (BARC), is currently developing concepts of high temperature reactors capable of supplying process heat around 1273 K. These reactors would provide energy to facilitate combined production of hydrogen, electricity, and drinking water. Compact high temperature reactor is being developed as a technology demonstrator for associated technologies. Design has been also initiated for a 600 MWth innovative high temperature reactor. High temperature reactor development programme has opened new avenues for research in areas like advanced nuclear fuels, high temperature and corrosion resistant materials and protective coatings, heavy liquid metal coolant technologies, etc. The paper highlights design of these reactors and their material related requirements

  20. Reactor Safety: Introduction

    The programme of the Reactor Safety Division focuses on the development of expertise on materials behaviour under irradiation for fission and fusion oriented applications. Furthermore, as nuclear energy needs international public acceptance with respect to safety and efficient management of natural resources and wants to reduce the burden of nuclear waste, the Reactor Safety Division enhanced its efforts to develop the MYRRHA project. MYRRHA, an accelerator driven sub-critical system, might have the potential to cope in Europe with the above mentioned constraints on acceptability and might serve as a technological platform for GEN IV reactor development, in particular the Liquid Metal Fast Reactor.The Reactor Safety Division gathers three research entities that are internationally recognised: the Reactor Materials Research department, the Reactor Physics and MYRRHA department and the Instrumentation department.The objectives of Reactor Materials Research are: to evaluate the integrity and behaviour of structural materials and nuclear fuels used in present and future nuclear power industry; to perform research to unravel and understand the parameters that determine the material and fuel behaviour under or after irradiation; to contribute to the interpretation and modelling of the materials and fuels behaviour in order to develop and assess strategies for optimum life management of nuclear power plant components. The programmes within the Reactor Materials Research department concentrate on four distinct disciplines: Reactor Pressure Vessel Steel embrittlement Stress corrosion cracking in reactor coolant environment, including Irradiation Assisted Stress Corrosion Cracking; Nuclear Fuel characterisation and development of new fuel types for commercial and test reactors. Development of materials for Fusion and advanced nuclear fission reactors. The safe operation of present nuclear power plants relies primarily on the integrity of the reactor pressure vessel

  1. Distribution of 16N and 19O in the reactor pool water of the THOR facility

    Radioactive 16N and 19O in the Tsing Hua Open-Pool Reactor, produced from 16O(n,p)16N and 18O(n,γ)19O reactions, respectively, have been measured using a rapid sampling device and gamma-ray spectroscopic systems. The radioactivity of the 7-s half-life 16N and 27-s half-life 19O in the pool water are monitored in the power range from 1 W to 1 MW. The three-dimensional concentration of these radionuclides in the water coolant is also contour mapped down to the detection limit of 10 Bq/l. The spatial distribution of the short-lived radionuclides in the reactor pool, resulting from both the neutron flux distribution and heat transfer characteristics external to the core, is discussed for reactor operation at various power levels

  2. Nuclear Reactor Physics

    Stacey, Weston M.

    2001-02-01

    An authoritative textbook and up-to-date professional's guide to basic and advanced principles and practices Nuclear reactors now account for a significant portion of the electrical power generated worldwide. At the same time, the past few decades have seen an ever-increasing number of industrial, medical, military, and research applications for nuclear reactors. Nuclear reactor physics is the core discipline of nuclear engineering, and as the first comprehensive textbook and reference on basic and advanced nuclear reactor physics to appear in a quarter century, this book fills a large gap in the professional literature. Nuclear Reactor Physics is a textbook for students new to the subject, for others who need a basic understanding of how nuclear reactors work, as well as for those who are, or wish to become, specialists in nuclear reactor physics and reactor physics computations. It is also a valuable resource for engineers responsible for the operation of nuclear reactors. Dr. Weston Stacey begins with clear presentations of the basic physical principles, nuclear data, and computational methodology needed to understand both the static and dynamic behaviors of nuclear reactors. This is followed by in-depth discussions of advanced concepts, including extensive treatment of neutron transport computational methods. As an aid to comprehension and quick mastery of computational skills, he provides numerous examples illustrating step-by-step procedures for performing the calculations described and chapter-end problems. Nuclear Reactor Physics is a useful textbook and working reference. It is an excellent self-teaching guide for research scientists, engineers, and technicians involved in industrial, research, and military applications of nuclear reactors, as well as government regulators who wish to increase their understanding of nuclear reactors.

  3. Thai research reactor

    The Office of Atomic Energy for Peace (OAEP) was established in 1962, as a reactor center, by the virtue of the Atomic Energy for Peace Act, under operational policy and authority of the Thai Atomic Energy for Peace Commission (TAEPC); and under administration of Ministry of Science, Technology and Energy. It owns and operates the only Thai Research Reactor (TRR-1/M1). The TRR-1/M1 is a mixed reactor system constituting of the old MTR type swimming pool, irradiation facilities and cooling system; and TRIGA Mark III core and control instrumentation. The general performance of TRR-1/M1 is summarized in Table I. The safe operation of TRR-1/M1 is regulated by Reactor Safety Committee (RSC), established under TAEPC, and Health Physics Group of OAEP. The RCS has responsibility and duty to review of and make recommendations on Reactor Standing Orders, Reactor Operation Procedures, Reactor Core Loading and Requests for Reactor Experiments. In addition,there also exist of Emergency Procedures which is administered by OAEP. The Reactor Operation Procedures constitute of reactor operating procedures, system operating procedures and reactor maintenance procedures. At the level of reactor routine operating procedures, there is a set of Specifications on Safety and Operation Limits and Code of Practice from which reactor shift supervisor and operators must follow in order to assure the safe operation of TRR-1/M1. Table II is the summary of such specifications. The OAEP is now upgrading certain major components of the TRR-1/M1 such as the cooling system, the ventilation system and monitoring equipment to ensure their adequately safe and reliable performance under normal and emergency conditions. Furthermore, the International Atomic Energy Agency has been providing assistance in areas of operation and maintenance and safety analysis. (author)

  4. 1 W of stable single-frequency output at 1.03 mum from a novel, monolithic, non-planar Yb:YAG ring laser operating at room temperature.

    Burdack, Peer; Fox, Thomas; Bode, Markus; Freitag, Ingo

    2006-05-15

    We demonstrate, for the first time to our knowledge, a longitudinally diode-pumped, monolithic ytterbium ion-doped YAG non-planar ring laser (NPRO). We achieved a continuous-wave (cw) single-frequency output power of 1 W with 45.0% slope efficiency and a beam quality factor of M(2)<1.1. In view of iodine frequency stabilization we have characterized the frequency tuning properties and have measured the relative intensity noise. Additionally, 6.1 mW second harmonic power at 515 nm was achieved using a periodically poled KTP crystal in a single-pass setup. PMID:19516588

  5. Visualization of 4th Cranial Nerve With MRI: Value of Balanced Fast-Field Echo and 3d-Drive Sequences Against The T2-TSE and Post-Contrast T1w Sequences

    Hasan AYDIN; Ç?FTÇ?, Egemen; HEK?MO?LU, Baki

    2009-01-01

    The aim of this study is to assess the best effective MRI sequence for the visualization of the 4th cranial nerve (Trochlear nerve) in its cisternal course. Balanced fast-field echo (B-FFE), 3D-T2W DRIVE Sense, T2W 2D TSE and Post-contrast T1W sequences were all applied and we tried to get the best sequence for the exact assessment of the 4th cranial nerve. 100 patients without the symptoms of trochlear nerve palsy were examined using the above sequences. Imaging analysis is graded as; nerve ...

  6. A metric graph satisfying w41=1$w_4^1 = 1$ that cannot be lifted to a curve satisfying dim⁡ (W41=1$\\dim \\;(W_4^1 = 1$

    Coppens Marc

    2016-02-01

    Full Text Available For all integers g ≥ 6 we prove the existence of a metric graph G with w41=1$w_4^1 = 1$ such that G has Clifford index 2 and there is no tropical modification G′ of G such that there exists a finite harmonic morphism of degree 2 from G′ to a metric graph of genus 1. Those examples show that not all dimension theorems on the space classifying special linear systems for curves have immediate translation to the theory of divisors on metric graphs.

  7. Crosstalk-free operation of multielement superconducting nanowire single-photon detector array integrated with single-flux-quantum circuit in a 0.1 W Gifford-McMahon cryocooler.

    Yamashita, Taro; Miki, Shigehito; Terai, Hirotaka; Makise, Kazumasa; Wang, Zhen

    2012-07-15

    We demonstrate the successful operation of a multielement superconducting nanowire single-photon detector (SSPD) array integrated with a single-flux-quantum (SFQ) readout circuit in a compact 0.1 W Gifford-McMahon cryocooler. A time-resolved readout technique, where output signals from each element enter the SFQ readout circuit with finite time intervals, revealed crosstalk-free operation of the four-element SSPD array connected with the SFQ readout circuit. The timing jitter and the system detection efficiency were measured to be 50 ps and 11.4%, respectively, which were comparable to the performance of practical single-pixel SSPD systems. PMID:22825199

  8. Reactor containment and reactor safety in the United States

    The reactor safety systems of two reactors are studied aiming at the reactor containment integrity. The first is a BWR type reactor and is called Peachbottom 2, and the second is a PWR type reactor, and is called surry. (E.G.)

  9. TRIGA reactor main systems

    This module describes the main systems of low power (<2 MW) and higher power (≥2 MW) TRIGA reactors. The most significant difference between the two is that forced reactor cooling and an emergency core cooling system are generally required for the higher power TRIGA reactors. However, those TRIGA reactors that are designed to be operated above 3 MW also use a TRIGA fuel that is specifically designed for those higher power outputs (3 to 14 MW). Typical values are given for the respective systems although each TRIGA facility will have unique characteristics that may only be determined by the experienced facility operators. Due to the inherent wide scope of these research reactor facilities construction and missions, this training module covers those systems found at most operating TRIGA reactor facilities but may also discuss non-standard equipment that was found to be operationally useful although not necessarily required. (author)

  10. Evaluation of research reactors

    The present status of research reactors with highly enriched (93%) uranium fuel at JAERI, JRR-2 and JMTR is described. JRR-2 is a heterogeneous type of reactor, using heavy water as moderator and coolant. It uses both MTR type and cylindrical type of fuel elements. The maximum thermal power and the thermal neutron flux are 10 MW and 2x1014 n/cm2 see respectively. The reactor has been used for various experiments such as solid state physics, material irradiation, reactor fuel irradiation and radioisotope production. The JMTR is a multi-purpose tank type material testing reactor, and light water moderator and coolant, operated at 50 MW. The evaluation of lower enriched fuel and its consequences for both reactors is considered more especially

  11. The nuclear soliton reactor

    The basic reactor physics of a completely novel nuclear fission reactor design - the soliton-reactor - is presented on the basis of a simple model. In such a reactor, the neutrons in the critical region convert either fertile material in the adjacent layers into fissile material or reduce the poisoning of fissile material in such a manner that successively new critical regions emerge. The result is an autocatalytically driven burn-up wave which propagates throughout the reactor. Thereby, the relevant characteristic spatial distributions (neutron flux, specific power density and the associated particle densities) are solitons - wave phenomena resulting from non-linear partial differential equations which do not change their shape during propagation. A qualitativley new kind of harnessing nuclear fission energy may become possible with fuel residence times comparable with the useful lifetime of the reactor system. In the long run, fast breeder systems which exploit the natural uranium and thorium resources, without any reprocessing capacity are imaginable. (orig.)

  12. Fast Spectrum Reactors

    Todd, Donald; Tsvetkov, Pavel

    2012-01-01

    Fast Spectrum Reactors presents a detailed overview of world-wide technology contributing to the development of fast spectrum reactors. With a unique focus on the capabilities of fast spectrum reactors to address nuclear waste transmutation issues, in addition to the well-known capabilities of breeding new fuel, this volume describes how fast spectrum reactors contribute to the wide application of nuclear power systems to serve the global nuclear renaissance while minimizing nuclear proliferation concerns. Readers will find an introduction to the sustainable development of nuclear energy and the role of fast reactors, in addition to an economic analysis of nuclear reactors. A section devoted to neutronics offers the current trends in nuclear design, such as performance parameters and the optimization of advanced power systems. The latest findings on fuel management, partitioning and transmutation include the physics, efficiency and strategies of transmutation, homogeneous and heterogeneous recycling, in addit...

  13. Multipurpose research reactors

    The international symposium on the utilization of multipurpose research reactors and related international co-operation was organized by the IAEA to provide for information exchange on current uses of research reactors and international co-operative projects. The symposium was attended by about 140 participants from 36 countries and two international organizations. There were 49 oral presentations of papers and 24 poster presentations. The presentations were divided into 7 sessions devoted to the following topics: neutron beam research and applications of neutron scattering (6 papers and 1 poster), reactor engineering (6 papers and 5 posters), irradiation testing of fuel and material for fission and fusion reactors (6 papers and 10 posters), research reactor utilization programmes (13 papers and 4 posters), neutron capture therapy (4 papers), neutron activation analysis (3 papers and 4 posters), application of small reactors in research and training (11 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

  14. Reactor BR2

    The BR2 reactor is still SCK-CEN's most important nuclear facility. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. Various aspects concerning the operation of the BR2 Reactor, the utilisation of the CALLISTO loop and the irradiation programme, the BR2 R and D programme and the production of isotopes and of NTD-silicon are discussed. Progress and achievements in 1999 are reported

  15. Fusion reactor research

    This work covers four separate areas: (1) development of technology for processing liquid lithium from blankets, (2) investigation of hydrogen isotope permeation in candidate structural metals and alloys for near-term fusion reactors, (3) analytical studies encompassing fusion reactor thermal hydraulics, tritium facility design, and fusion reactor safety, and (4) studies involving dosimetry and damage analysis. Recent accomplishments in each of these areas are summarized

  16. The Integral Fast Reactor

    The Integral Fast Reactor (IFR) is an innovative liquid metal reactor concept being developed at Argonne National Laboratory. It seeks to specifically exploit the inherent properties of liquid metal cooling and metallic fuel in a way that leads to substantial improvements in the characteristics of the complete reactor system. This paper describes the key features and potential advantages of the IFR concept, with emphasis on its safety characteristics. 3 refs., 4 figs., 1 tab

  17. PFBR reactor protection

    Design philosophy adopted for Prototype Fast breeder Reactor (PFBR) is a classical one and has the following features: triplicated sensors for measuring important safety parameters; two independent reactor protection Logic Systems based on solid state devices; reactivity control achieved by control rods; gas equipped modules at the core blanket interface providing negative reactivity. Design verification of these features showed that safety of the reactor can be achieved by a traditional approach since the inherent features of LMFBR make this easy

  18. Reactor Safety Analysis

    The objective of SCK-CEN's programme on reactor safety is to develop expertise in probabilistic and deterministic reactor safety analysis. The research programme consists of four main activities, in particular the development of software for reliability analysis of large systems and participation in the international PHEBUS-FP programme for severe accidents, the development of an expert system for the aid to diagnosis; the development and application of a probabilistic reactor dynamics method. Main achievements in 1999 are reported

  19. TRIGA reactor characteristics

    This module describes the general design, characteristics and parameters of TRIGA reactors and fuels. It is recommended that most of this information should be incorporated into any reactor operator training program and, in many cases, the facility Safety Analysis Report. It is oriented to teach the basics of the physics and mechanical design of the TRIGA fuel as well as its unique operational characteristics and the differences between TRIGA fuels and others more traditional reactor fuels. (nevyjel)

  20. The replacement research reactor

    As a consequences of the government decision in September 1997. ANSTO established a replacement research reactor project to manage the procurement of the replacement reactor through the necessary approval, tendering and contract management stages This paper provides an update of the status of the project including the completion of the Environmental Impact Statement. Prequalification and Public Works Committee processes. The aims of the project, management organisation, reactor type and expected capabilities are also described

  1. Reactor Engineering Division annual report

    Research and development activities in the Division of Reactor Engineering in fiscal 1981 are described. The work of the Division is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and fusion reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and fusion reactor technology, and activities of the Committee on Reactor Physics. (author)

  2. Reactor Engineering Department annual report

    Research and development activities in the Department of Reactor Engineering in fiscal 1984 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, reactor physics experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, safeguards technology, and activities of the Committee on Reactor Physics. (author)

  3. Reactor Engineering Division annual report

    Research activities in the Division of Reactor Engineering in fiscal 1979 are described. The work of the Division is closely related to development of multi-purpose Very High Temperature Gas Cooled Reactor and fusion reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and fusion reactor technology, and activities of the Committees on Reactor Physics and on Decomissioning of Nuclear Facilities. (author)

  4. Nuclear reactor internals arrangement

    A nuclear reactor internals arrangement is disclosed which facilitates reactor refueling. A reactor vessel and a nuclear core is utilized in conjunction with an upper core support arrangement having means for storing withdrawn control rods therein. The upper core support is mounted to the underside of the reactor vessel closure head so that upon withdrawal of the control rods into the upper core support, the closure head, the upper core support and the control rods are removed as a single unit thereby directly exposing the core for purposes of refueling

  5. Fusion Reactor Materials

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed

  6. Reactor power control device

    The present invention provides a control device which can conduct scram and avoid lowering of the power of a nuclear power plant upon occurrence of earthquakes. Namely, the device of the present invention comprises, in addition to an existent power control device, (1) an earthquake detector for detecting occurrence and annihilation of earthquakes and (2) a reactor control device for outputting control rod operation signals and reactor core flow rate control signals depending on the earthquake detection signals from the detector, and reactor and plant information. With such a constitution, although the reactor is vibrated by earthquakes, the detector detects slight oscillations of the reactor by initial fine vibration waves as premonitory symptoms of serious earthquakes. The earthquake occurrence signals are outputted to the reactor control device. The reactor control device, receiving the signals, changes the position of control rods by way of control rod driving mechanisms to make the axial power distribution in the reactor core to a top peak type. As a result, even if the void amount in the reactor core is reduced by the subsequent actual earthquakes, since the void amount is moved, effects on the increase of neutron fluxes by the actual earthquakes is small. (I.S.)

  7. Commercialization of fast reactors

    Comparative analysis has been performed of capital and fuel cycle costs for fast BN-type and pressurized light water VVER-type reactors. As a result of materials demand and components costs comparison of NPPs with VVER-1000 and BN-600 reactors, respectively, conclusion was made, that under equal conditions of the comparison, NPP with fast reactor had surpassed the specific capital cost of NPP with VVER by about 30 - 40 %. Ways were determined for further decrease of this difference, as well as for the fuel cycle cost reduction, because at present it is higher than that of VVER-type reactors. (author)

  8. Mirror fusion reactors

    Conceptual design studies were made of fusion reactors based on the three current mirror-confinement concepts: the standard mirror, the tandem mirror, and the field-reversed mirror. Recent studies of the standard mirror have emphasized its potential as a fusion-fission hybrid reactor, designed to produce fuel for fission reactors. We have designed a large commercial hybrid and a small pilot-plant hybrid based on standard mirror confinement. Tandem mirror designs include a commercial 1000-MWe fusion power plant and a nearer term tandem mirror hybrid. Field-reversed mirror designs include a multicell commercial reactor producing 75 MWe and a single-cell pilot plant

  9. New reactor concepts

    The document gives a summary of new nuclear reactor concepts from a technological point of view. Belgium supports the development of the European Pressurized-Water Reactor, which is an evolutionary concept based on the European experience in Pressurized-Water Reactors. A reorientation of the Belgian choice for this evolutionary concept may be required in case that a decision is taken to burn plutonium, when the need for flexible nuclear power plants arises or when new reactor concepts can demonstrate proved benefits in terms of safety and cost

  10. Reactor construction steels

    The basic functions of light water reactor components are shown on the example of a pressurized water reactor and the requirements resulting therefrom for steel, the basic structural material, are derived. A detailed analysis of three main groups of reactor steels is presented and the applications are indicated of low-alloyed steels, high-alloyed austenitic steels, and steels with a high content of Ni and of alloying additions for steam generator pipes. An outline is given of prospective fast breeder reactor steels. (J.K.)

  11. INVAP's Research Reactor Designs

    INVAP, an Argentine company founded more than three decades ago, is today recognized as one of the leaders within the research reactor industry. INVAP has participated in several projects covering a wide range of facilities, designed in accordance with the requirements of our different clients. For complying with these requirements, INVAP developed special skills and capabilities to deal with different fuel assemblies, different core cooling systems, and different reactor layouts. This paper summarizes the general features and utilization of several INVAP research reactor designs, from subcritical and critical assemblies to high-power reactors IAEA safety

  12. Natural convection type reactor

    In a natural convection type nuclear reactor, a reactor core is disposed such that the top of the reactor core is always situated in a flooded position even if pipelines connected to the pressure vessel are ruptured and the level at the inside of the reactor vessel is reduced due to flashing. Further, a lower dry well situated below the pressure vessel is disposed such that it is in communication with a through hole to a pressure suppression chamber situated therearound and the reactor core is situated at the level lower than that of the through hole. If pipelines connected to the pressure vessel are ruptured to cause loss of water, although the water level is lowered after the end of the flashing, the reactor core is always flooded till the operation of a pressure accummulation water injection system to prevent the top of the reactor core even from temporary exposure. Further, injected water is discharged to the outside of the pressure vessel, transferred to the lower dry well, and flows through the through hole to the pressure control chamber and cools the surface of the reactor pressure vessel from the outside. Accordingly, the reactor core is cooled to surely and efficiently remove the after-heat. (N.H.)

  13. The research reactors their contribution to the reactors physics

    The 19 october 2000, the french society of nuclear energy organized a day on the research reactors. This associated report of the technical session, reactors physics, is presented in two parts. The first part deals with the annual meeting and groups general papers on the pressurized water reactors, the fast neutrons reactors and the fusion reactors industry. The second part presents more technical papers about the research programs, critical models, irradiation reactors (OSIRIS and Jules Horowitz) and computing tools. (A.L.B.)

  14. Hydrolysis of Virgin Coconut Oil Using Immobilized Lipase in a Batch Reactor

    Lee Suan Chua; Meisam Alitabarimansor; Chew Tin Lee; Ramli Mat

    2012-01-01

    Hydrolysis of virgin coconut oil (VCO) had been carried out by using an immobilised lipase from Mucor miehei (Lipozyme) in a water-jacketed batch reactor. The kinetic of the hydrolysis was investigated by varying the parameters such as VCO concentration, enzyme loading, water content, and reaction temperature. It was found that VCO exhibited substrate inhibition at the concentration more than 40% (v/v). Lipozyme also achieved the highest production of free fatty acids, 4.56 mM at 1% (w/v) of ...

  15. Gas-cooled reactors

    The present study is the second part of a general survey of Gas Cooled Reactors (GCRs). In this part, the course of development, overall performance and present development status of High Temperature Gas Cooled Reactors (HTCRs) and advances of HTGR systems are reviewed. (author)

  16. Polymerization Reactor Engineering.

    Skaates, J. Michael

    1987-01-01

    Describes a polymerization reactor engineering course offered at Michigan Technological University which focuses on the design and operation of industrial polymerization reactors to achieve a desired degree of polymerization and molecular weight distribution. Provides a list of the course topics and assigned readings. (TW)

  17. One piece reactor removal

    Japan Research Reactor No.3 (JRR-3) was the first reactor consisting of 'Japanese-made' components alone except for fuel and heavy water. After reaching its initial critical state in September 1962, JRR-3 had been in operation for 21 years until March 1983. It was decided that the reactor be removed en-bloc in view of the work schedule, cost and management of the reactor following the removal. In the special method developed jointly by the Japanese Atomic Energy Research Institute and Shimizu Construction Co., Ltd., the reactor main unit was cut off from the building by continuous core boring, with its major components bound in the block with biological shield material (heavy concrete), and then conveyed and stored in a large waste store building constructed near the reactor building. Major work processes described in this report include the cutting off, lifting, horizontal conveyance and lowering of the reactor main unit. The removal of the JRR-3 reactor main unit was successfully carried out safely and quickly by the en-block removal method with radiation exposure dose of the workers being kept at a minimum. Thus the high performance of the en-bloc removal method was demonstrated and, in addition, valuable knowhow and other data were obtained from the work. (Nogami, K.)

  18. Reactor Materials Research

    The activities of the Reactor Materials Research Department of the Belgian Nuclear Research Centre SCK-CEN in 2000 are summarised. The programmes within the department are focussed on studies concerning (1) fusion, in particular mechanical testing; (2) Irradiation Assisted Stress Corrosion Cracking (IASCC); (3) nuclear fuel; and (4) Reactor Pressure Vessel Steel (RPVS)

  19. The fusion reactor

    Basic principles of the fusion reactor are outlined. Plasma heating and confinement schemes are described. These confinement systems include the linear Z pinch, magnetic mirrors and Tokamaks. A fusion reactor is described and a discussion is given of its environmental impact and its fuel situation. (R.L.)

  20. Light water reactor program

    Franks, S.M.

    1994-12-31

    The US Department of Energy`s Light Water Reactor Program is outlined. The scope of the program consists of: design certification of evolutionary plants; design, development, and design certification of simplified passive plants; first-of-a-kind engineering to achieve commercial standardization; plant lifetime improvement; and advanced reactor severe accident program. These program activities of the Office of Nuclear Energy are discussed.

  1. Reactor Safety Analysis

    The objective of SCK-CEN's programme on reactor safety is to develop expertise in probabilistic and deterministic reactor safety analysis. The research programme consists of two main activities, in particular the development of software for reliability analysis of large systems and participation in the international PHEBUS-FP programme for severe accidents. Main achievements in 1999 are reported

  2. Light water type reactor

    The nuclear reactor of the present invention prevents disruption of a reactor core even in a case of occurrence of entire AC power loss event, and even if a reactor core disruption should occur, it prevents a rupture of the reactor container due to excess heating. That is, a high pressure water injection system and a low pressure water injection system operated by a diesel engine are disposed in the reactor building in addition to an emergency core cooling system. With such a constitution, even if an entire AC power loss event should occur, water can surely be injected to the reactor thereby enabling to prevent the rupture of the reactor core. Even if it should be ruptured, water can be sprayed to the reactor container by the low pressure water injection system. Further, if each of water injection pumps of the high pressure water injection system and the low pressure water injection system can be driven also by motors in addition to the diesel engine, the pump operation can be conducted more certainly and integrally. (I.S.)

  3. Reactor Materials Research

    Van Walle, E

    2001-04-01

    The activities of the Reactor Materials Research Department of the Belgian Nuclear Research Centre SCK-CEN in 2000 are summarised. The programmes within the department are focussed on studies concerning (1) fusion, in particular mechanical testing; (2) Irradiation Assisted Stress Corrosion Cracking (IASCC); (3) nuclear fuel; and (4) Reactor Pressure Vessel Steel (RPVS)

  4. Compact torsatron reactors

    Low-aspect-ratio torsatron configurations could lead to compact stellarator reactors with R0 = 8--11m, roughly one-half to one-third the size of more conventional stellarator reactor designs. Minimum-size torsatron reactors are found using various assumptions. Their size is relatively insensitive to the choice of the conductor parameters and depends mostly on geometrical constraints. The smallest size is obtained by eliminating the tritium breeding blanket under the helical winding on the inboard side and by reducing the radial depth of the superconducting coil. Engineering design issues and reactor performance are examined for three examples to illustrate the feasibility of this approach for compact reactors and for a medium-size (R0 ≅ 4 m,/bar a/ /approx lt/ 1 m) copper-coil ignition experiment. 26 refs., 11 figs., 7 tabs

  5. TRIGA research reactors

    TRIGA (Training, Research, Isotope production, General-Atomic) has become the most used research reactor in the world with 65 units operating in 24 countries. The original patent for TRIGA reactors was registered in 1958. The success of this reactor is due to its inherent level of safety that results from a prompt negative temperature coefficient. Most of the neutron moderation occurs in the nuclear fuel (UZrH) because of the presence of hydrogen atoms, so in case of an increase of fuel temperature, the neutron spectrum becomes harder and neutrons are less likely to fission uranium nuclei and as a consequence the power released decreases. This inherent level of safety has made this reactor fit for training tool in university laboratories. Some recent versions of TRIGA reactors have been designed for medicine and industrial isotope production, for neutron therapy of cancers and for providing a neutron source. (A.C.)

  6. Status of French reactors

    Ballagny, A. [Commissariat a l`Energie Atomique, Saclay (France)

    1997-08-01

    The status of French reactors is reviewed. The ORPHEE and RHF reactors can not be operated with a LEU fuel which would be limited to 4.8 g U/cm{sup 3}. The OSIRIS reactor has already been converted to LEU. It will use U{sub 3}Si{sub 2} as soon as its present stock of UO{sub 2} fuel is used up, at the end of 1994. The decision to close down the SILOE reactor in the near future is not propitious for the start of a conversion process. The REX 2000 reactor, which is expected to be commissioned in 2005, will use LEU (except if the fast neutrons core option is selected). Concerning the end of the HEU fuel cycle, the best option is reprocessing followed by conversion of the reprocessed uranium to LEU.

  7. Naval propulsion reactors

    This article deals with the design and exploitation of naval propulsion reactors, mainly of PWR-type. The other existing or conceivable types of reactors are also presented: 1 - specificities of nuclear propulsion (integration in the ship, marine environment, maneuverability, instantaneous availability, conditions of exploitation-isolation, nuclear safety, safety authority); 2 - PWR-type reactor (stable operation, mastered technology, general design, radiation protection); 3 - other reactor types; 4 - compact or integrated loops architecture; 5 - radiation protection; 6 - reactor core; 7 - reactivity control (core lifetime, control means and mechanisms); 8 - core cooling (natural circulation, forced circulation, primary flow-rate program); 9 - primary loop; 10 - pressurizer; 11 - steam generators and water-steam secondary loop; 12 - auxiliary and safety loops; 13 - control instrumentation; 14 - operation; 15 - nuclear wastes and dismantling. (J.S.)

  8. Iris reactor conceptual design

    IRIS (International Reactor Innovative and Secure) is a modular, integral, light water cooled, low-to-medium power (100-350 MWe) reactor which addresses the requirements defined by the US DOE for Generation IV reactors, i.e., proliferation resistance, enhanced safety, improved economics and fuel cycle sustainability. It relies on the proven technology of light water reactors and features innovative engineering, but it does not require new technology development. This paper discusses the current reference IRIS design, which features a 1000 MWt thermal core with proven 5%-enriched uranium oxide fuel and five-year long straight burn fuel cycle, integral reactor vessel housing helical tube steam generators and immersed spool pumps. Other major contributors to the high level of safety and economic attractiveness are the safety by design and optimized maintenance approaches, which allow elimination of some classes of accidents, lower capital cost, long operating cycle, and high capacity factors. (author)

  9. Research reactor DHRUVA

    DHRUVA, a 100 MWt research reactor located at the Bhabha Atomic Research Centre, Bombay, attained first criticality during August, 1985. The reactor is fuelled with natural uranium and is cooled, moderated and reflected by heavy water. Maximum thermal neutron flux obtained in the reactor is 1.8 X 1014 n/cm2/sec. Some of the salient design features of the reactor are discussed in this paper. Some important features of the reactor coolant system, regulation and protection systems and experimental facilities are presented. A short account of the engineered safety features is provided. Some of the problems that were faced during commissioning and the initial phase of power operation are also dealt upon

  10. Reactor core monitoring method

    Mori, Michitsugu [Tokyo Electric Power Co., Inc. (Japan); Kanemoto, Shigeru; Enomoto, Mitsuhiro; Ebata, Shigeo

    1998-05-06

    The present invention provides a method of monitoring the state of coolant flow in a reactor of a BWR power plant. Namely, a plurality of local power region monitors (LPRM) are disposed to the inside of the reactor core for monitoring a power distribution. Signals of at least two optional LPRM detectors situated at positions different in axial or radial positions of the reactor core are obtained. General fluctuation components which nuclear hydrothermally fluctuate in overall reactor core are removed from the components of the signals. Then, correlational functions between these signals are determined. The state of coolant flow in the reactor is monitored based on the correlational function. When the axial flowing rate and radial flow interference are monitored, the accuracy upon monitoring axial and radial local behaviors of coolants can be improved by thus previously removing the general fluctuation components from signals of LPRM detectors and extracting local void information near to LPRM detectors at high accuracy. (I.S.)

  11. Physics of nuclear reactors

    This manual covers all the aspects of the science of neutron transport in nuclear reactors and can be used with great advantage by students, engineers or even reactor experts. It is composed of 18 chapters: 1) basis of nuclear physics, 2) the interactions of neutrons with matter, 3) the interactions of electromagnetic radiations and charged-particles with matter, 4) neutron slowing-down, 5) resonant absorption, 6) Doppler effect, 7) neutron thermalization, 8) Boltzmann equation, 9) calculation methods in neutron transport theory, 10) neutron scattering, 11) reactor reactivity, 12) theory of the critical homogenous pile, 13) the neutron reflector, 14) the heterogeneous reactor, 15) the equations of the fuel cycle, 16) neutron counter-reactions, 17) reactor kinetics, and 18) calculation methods in neutron scattering

  12. Mirror reactor surface study

    A general survey is presented of surface-related phenomena associated with the following mirror reactor elements: plasma first wall, ion sources, neutral beams, director converters, vacuum systems, and plasma diagnostics. A discussion of surface phenomena in possible abnormal reactor operation is included. Several studies which appear to merit immediate attention and which are essential to the development of mirror reactors are abstracted from the list of recommended areas for surface work. The appendix contains a discussion of the fundamentals of particle/surface interactions. The interactions surveyed are backscattering, thermal desorption, sputtering, diffusion, particle ranges in solids, and surface spectroscopic methods. A bibliography lists references in a number of categories pertinent to mirror reactors. Several complete published and unpublished reports on surface aspects of current mirror plasma experiments and reactor developments are also included

  13. FBR type reactor

    A circular neutron reflector is disposed vertically movably so as to surround the outer circumference of a reactor core barrel. A reflector driving device comprises a driving device main body attracted to the outer wall surface of the reactor barrel by electromagnetic attraction force and an inertia body disposed above the driving device main body vertically movably. A reflector is connected below the reactor driving device. At the initial stage, a spontaneous large current is supplied to upper electromagnetic repulsion coils of the reflector driving device, impact electromagnetic repulsion force is caused between the inertia body and the reflector driving device, so that the driving device main body moves downwardly by a predetermined distance and stopped. The reflector driving device can be lowered in a step-like manner to an appropriate position suitable to restart the reactor during stoppage of the reactor core by conducting spontaneous supply of current repeatedly to the upper electromagnetic repulsion coils. (I.N.)

  14. Nuclear reactor design

    2014-01-01

    This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.

  15. Multi-purpose reactor

    The Multi-Purpose-Reactor (MPR), is a pool-type reactor with an open water surface and variable core arrangement. Its main feature is plant safety and reliability. Its power is 22MWth, cooled by light water and moderated by beryllium. It has platetype fuel elements (MTR type, approx. 20%. enriched uranium) clad in aluminium. Its cobalt (Co60) production capacity is 50000 Ci/yr, 200Ci/gr. The distribution of the reactor core and associated control and safety systems is essentially based on the following design criteria: - upwards cooling flow, to waive the need for cooling flow inversion in case the reactor is cooled by natural convection if confronted with a loss of pumping power, and in order to establish a superior heat transfer potential (a higher coolant saturation temperature); - easy access to the reactor core from top of pool level with the reactor operating at full power, in order to facilitate actual implementation of experiments. Consequently, mechanisms associated to control and safety rods s,re located underneath the reactor tank; - free access of reactor personnel to top of pool level with the reactor operating at full power. This aids in the training of personnel and the actual carrying out of experiments, hence: - a vast water column was placed over the core to act as radiation shielding; - the core's external area is cooled by a downwards flow which leads to a decay tank beyond the pool (for N16 to decay); - a small downwards flow was directed to stream downwards from above the reactor core in order to drag along any possibly active element; and - a stagnant hot layer system was placed at top of pool level so as to minimize the upwards coolant flow rising towards pool level

  16. The CAREM reactor and present currents in reactor design

    INVAP has been working on the CAREM project since 1983. It concerns a very low power reactor for electrical energy generation. The design of the reactor and the basic criteria used were described in 1984. Since then, a series of designs have been presented for reactors which are similar to CAREM regarding the solutions presented to reduce the chance of major nuclear accidents. These designs have been grouped under different names: Advanced Reactors, Second Generation Reactors, Inherently Safe Reactors, or even, Revolutionary Reactors. Every reactor fabrication firm has, at least, one project which can be placed in this category. Presently, there are two main currents of Reactor Design; Evolutionary and Revolutionary. The present work discusses characteristics of these two types of reactors, some revolutionary designs and common criteria to both types. After, these criteria are compared with CAREM reactor design. (Author)

  17. Reactor Engineering Department annual report

    Research and development activities in the Department of Reactor Engineering in fiscal 1983 are described. The work of the Department is closely related to development of multipurpose Very High Temperature Gas Cooled Reactor and Fusion Reactor, and development of Liquid Metal Fast Breeder Reactor carried out by Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are achievements in fields such as nuclear data and group constants, theoretical method and code development, integral experiment and analysis, fusion neutronics, shielding, reactor and nuclear instrumentation, reactor control and diagnosis, and safeguards technology, and activities of the Committee on Reactor Physics. (author)

  18. Reactor Engineering Division annual report

    Research activities conducted in Reactor Engineering Division in fiscal 1975 are summarized in this report. Works in the division are closely related to the development of multi-purpose High-temperature Gas Cooled Reactor, the development of Liquid Metal Fast Breeder Reactor by Power Reactor and Nuclear Fuel Development Corporation, and engineering research of thermonuclear fusion reactor. Many achievements are described concerning nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology and activities of the Committee on Reactor Physics. (auth.)

  19. Reactor Engineering Division annual report

    Research activities in the Division of Reactor Engineering in fiscal 1977 are described. Works of the Division are development of multi-purpose Very High Temperature Gas Cooled Reactor, fusion reactor engineering, and development of Liquid Metal Fast Breeder Reactor for Power Reactor and Nuclear Fuel Development Corporation. Contents of the report are nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology, and Committee on Reactor Physics. (Author)

  20. Reactor performance calculations for water reactors

    The principles of nuclear, thermal and hydraulic performance calculations for water cooled reactors are discussed. The principles are illustrated by describing their implementation in the UKAEA PATRIARCH scheme of computer codes. This material was originally delivered as a course of lectures at the Technical University of Helsinki in Summer of 1969.

  1. Safety of research reactors

    The number of research reactors that have been constructed worldwide for civilian applications is about 651. Of the reactors constructed, 284 are currently in operation, 258 are shut down and 109 have been decommissioned. More than half of all operating research reactors worldwide are over thirty years old. During this long period of time national priorities have changed. Facility ageing, if not properly managed, has a natural degrading effect. Many research reactors face concerns with the obsolescence of equipment, lack of experimental programmes, lack of funding for operation and maintenance and loss of expertise through ageing and retirement of the staff. Other reactors of the same vintage maintain effective ageing management programmes, conduct active research programmes, develop and retain high calibre personnel and make important contributions to society. Many countries that operate research reactors neither operate nor plan to operate power reactors. In most of these countries there is a tendency not to create a formal regulatory body. A safety committee, not always independent of the operating organization, may be responsible for regulatory oversight. Even in countries with nuclear power plants, a regulatory regime differing from the one used for the power plants may exist. Concern is therefore focused on one tail of a continuous spectrum of operational performance. The IAEA has been sending missions to review the safety of research reactors in Member States since 1972. Some of the reviews have been conducted pursuant to the IAEA' functions and responsibilities regarding research reactors that are operated within the framework of Project and Supply Agreements between Member States and the IAEA. Other reviews have been conducted upon request. All these reviews are conducted following procedures for Integrated Safety Assessment of Research Reactors (INSARR) missions. The prime objective of these missions has been to conduct a comprehensive operational safety

  2. Fourth Generation Reactor Concepts

    Concerns over energy resources availability, climate changes and energy supply security suggest an important role for nuclear energy in future energy supplies. So far nuclear energy evolved through three generations and is still evolving into new generation that is now being extensively studied. Nuclear Power Plants are producing 16% of the world's electricity. Today the world is moving towards hydrogen economy. Nuclear technologies can provide energy to dissociate water into oxygen and hydrogen and to production of synthetic fuel from coal gasification. The introduction of breeder reactors would turn nuclear energy from depletable energy supply into an unlimited supply. From the early beginnings of nuclear energy in the 1940s to the present, three generations of nuclear power reactors have been developed: First generation reactors: introduced during the period 1950-1970. Second generation: includes commercial power reactors built during 1970-1990 (PWR, BWR, Candu, Russian RBMK and VVER). Third generation: started being deployed in the 1990s and is composed of Advanced LWR (ALWR), Advanced BWR (ABWR) and Passive AP600 to be deployed in 2010-2030. Future advances of the nuclear technology designs can broaden opportunities for use of nuclear energy. The fourth generation reactors are expected to be deployed by 2030 in time to replace ageing reactors built in the 1970s and 1980s. The new reactors are to be designed with a view of the following objectives: economic competitiveness, enhanced safety, minimal radioactive waste production, proliferation resistance. The Generation IV International Forum (GIF) was established in January 2000 to investigate innovative nuclear energy system concepts. GIF members include Argentina, Brazil, Canada, Euratom, France Japan, South Africa, South Korea, Switzerland, United Kingdom and United States with the IAEA and OECD's NEA as permanent observers. China and Russia are expected to join the GIF initiative. The following six systems

  3. Reactor Engineering Department annual report

    This report summarizes the research and development activities in the Department of Reactor Engineering during the fiscal year of 1992 (April 1, 1992-March 31, 1993). The major Department's programs promoted in the year are the assessment of the high conversion light water reactor, the design activities of advanced reactor system and development of a high energy proton linear accelerator for the engineering applications including TRU incineration. Other major tasks of the Department are various basic researches on the nuclear data and group constants, the developments of theoretical methods and codes, the reactor physics experiments and their analyses, fusion neutronics, radiation shielding, reactor instrumentation, reactor control/diagnosis, thermohydraulics and technology developments related to the reactor physics facilities. The cooperative works to JAERI's major projects such as the high temperature gas cooled reactor or the fusion reactor and to PNC's fast reactor project were also progressed. The activities of the Research Committee on Reactor Physics are also summarized. (author)

  4. Reactor engineering department annual report

    This report summarizes the research and development activities in the Department of Reactor Engineering during the fiscal year of 1989 (April 1, 1989 - March 31, 1990). One of major Department's programs is the assessment of the high conversion light water reactor and the design activities of advanced reactor system. Development of a high energy proton linear accelerator for the nuclear engineering including is also TRU incineration promoted. Other major tasks of the Department are various basic researches on nuclear data and group constants, theoretical methods and code development, on reactor physics experiments and analyses, fusion neutronics, radiation shielding, reactor instrumentation, reactor control/diagnosis, thermohydraulics, technology assessment of nuclear energy and technology developments related to the reactor physics facilities. The cooperative works to JAERI's major projects such as the high temperature gas cooled reactor or the fusion reactor and to PNC's fast reactor project also progressed. The activities of the Research Committee on Reactor Physics are also summarized. (author)

  5. Advanced reactor licensing issues

    In July 1986 the US Nuclear Regulatory Commission issued a Policy Statement on the Regulation of Advanced Nuclear Power Plants. As part of this policy advanced reactor designers were encouraged to interact with NRC early in the design process to obtain feedback regarding licensing requirements for advanced reactors. Accordingly, the staff has been interacting with the Department of Energy (DOE) and its contractors on the review of three advanced reactor conceptual designs: one modular High Temperature Gas-Cooled Reactor (MHTGR) and two Liquid Metal Reactors (LMRs). As a result of these interactions certain safety issues associated with these advanced reactor designs have been identified as key to the licensability of the designs as proposed by DOE. The major issues in this regard are: (1) selection and treatment of accident scenarios; (2) selection of siting source term; (3) performance and reliability of reactor shutdown and decay heat removal systems; (4) need for conventional containment; (5) need for conventional emergency evacuation; (6) role of the operator; (7) treatment of balance of plant; and (8) modular approach. This paper provides a status of the NRC review effort, describes the above issues in more detail and provides the current status and approach to the development of licensing guidance on each

  6. Slurry reactor design studies

    Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. (Bechtel Group, Inc., San Francisco, CA (USA)); Akgerman, A. (Texas A and M Univ., College Station, TX (USA)); Smith, J.M. (California Univ., Davis, CA (USA))

    1990-06-01

    The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

  7. FBR type reactor

    The present invention provides an FBR type reactor in which the combustion of reactor core fuels is controlled by reflectors, and the position of a reflector driving device can be controlled even during shut down of the reactor. Namely, the reflector driving device is attracted to the outer wall surface of a reactor core barrel by electromagnetic attraction force. An inertia body is disposed vertically movably to the upper portion of the reflector driving device. Magnetic repulsive coils generate instantaneous magnetic repulsive force between the inertia body and the reflector driving device. With such a constitution, the reflector driving device can be driven by using magnetic repulsion of the electromagnetic repulsive coils and inertia of the inertia body. As a result, not only the reflectors can be elevated at an ultraslow speed during normal reactor operation, but also fine position adjustment for the reflector driving device, as well as fine position adjustment of the reflectors required upon restart of the reactor can be conducted by lowering the reflector driving device during shut down of the reactor. (I.S.)

  8. Reactor water sampling device

    The present invention concerns a reactor water sampling device for sampling reactor water in an in-core monitor (neutron measuring tube) housing in a BWR type reactor. The upper end portion of a drain pipe of the reactor water sampling device is attached detachably to an in-core monitor flange. A push-up rod is inserted in the drain pipe vertically movably. A sampling vessel and a vacuum pump are connected to the lower end of the drain pipe. A vacuum pump is operated to depressurize the inside of the device and move the push-up rod upwardly. Reactor water in the in-core monitor housing flows between the drain pipe and the push-up rod and flows into the sampling vessel. With such a constitution, reactor water in the in-core monitor housing can be sampled rapidly with neither opening the lid of the reactor pressure vessel nor being in contact with air. Accordingly, operator's exposure dose can be reduced. (I.N.)

  9. Test reactor technology

    The Reactor Development Program created a need for engineering testing of fuels and materials. The Engineering Test Reactors were developed around the world in response to this demand. The design of the test reactors proved to be different from that of power reactors, carrying the fuel elements closer to the threshold of failure, requiring more responsive instrumentation, more rapid control element action, and inherent self-limiting behavior under accident conditions. The design of the experimental facilities to exploit these reactors evolved a new, specialized, branch of engineering, requiring a very high-lvel scientific and engineering team, established a meticulous concern with reliability, the provision for recovery from their own failures, and detailed attention to possible interactions with the test reactors. This paper presents this technology commencing with the Materials Testing Reactor (MTR) through the Fast Flux Test Facility, some of the unique experimental facilities developed to exploit them, but discusses only cursorily the experiments performed, since sample preparation and sample analyses were, and to some extent still are, either classified or proprietary. The Nuclear Engineering literature is filled with this information

  10. Nuclear reactor power monitor

    The device of the present invention monitors phenomena occurred in a nuclear reactor more accurately than usual case. that is, the device monitors a reactor power by signals sent from a great number of neutron monitors disposed in the reactor. The device has a means for estimating a phenomenon occurred in the reactor based on the relationship of a difference of signals between each of the great number of neutron monitors to the positions of the neutron monitors disposed in the reactor. The estimation of the phenomena is conducted by, for example, conversion of signals sent from the neutron monitors to a code train. Then, a phenomenon is estimated rapidly by matching the code train described above with a code train contained in a data base. Further. signals sent from the neutron monitors are processed statistically to estimate long term and periodical phenomena. As a result, phenomena occurred in the reactor are monitored more accurately than usual case, thereby enabling to improve reactor safety and operationability. (I.S.)

  11. Main: 1W07 [RPSD[Archive

    Full Text Available 1; Arabidopsis Thaliana Molecule: Acyl-Coa Oxidase; Chain: A, B; Mutation: Yes; Engineered: Yes Oxidoreducta...AGSRHAFEVSDRIARLVASDPVFEKSNRARLSRKELFKSTLRKCAHAFKRIIELRLNEEEAGRLRHFIDQPAYVDLHWGMFVPAI...YLWCSGLPELFAVYVPACTYEGDNVVLQLQVARFLMKTVAQLGSGKVPVGTTAYMGRAAHLLQCRSGVQKAEDWLNPDVVLEAFEARALRMAVTCAKNLSKFENQEQGFQELLADLVEAAI

  12. Reactor Sharing Program

    Support utilization of the RINSC reactor for student and faculty instructions and research. The Department of Energy award has provided financial assistance during the period 9/29/1995 to 5/31/2001 to support the utilization of the Rhode Island Nuclear Science Center (RINSC) reactor for student and faculty instruction and research by non-reactor owning educational institutions within approximately 300 miles of Narragansett, Rhode Island. Through the reactor sharing program, the RINSC (including the reactor and analytical laboratories) provided reactor services and laboratory space that were not available to the other universities and colleges in the region. As an example of services provided to the users: Counting equipment, laboratory space, pneumatic and in-pool irradiations, demonstrations of sample counting and analysis, reactor tours and lectures. Funding from the Reactor Sharing Program has provided the RINSC to expand student tours and demonstration programs that emphasized our long history of providing these types of services to the universities and colleges in the area. The funding have also helped defray the cost of the technical assistance that the staff has routinely provided to schools, individuals and researchers who have called on the RINSC for resolution of problems relating to nuclear science. The reactor has been featured in a Public Broadcasting System documentary on Pollution in the Arctic and how a University of Rhode Island Professor used Neutron Activation Analysis conducted at the RINSC to discover the sources of the ''Arctic Haze''. The RINSC was also featured by local television on Earth Day for its role in environmental monitoring

  13. 1 W of blue 465-nm radiation generated by frequency doubling of the output of a high-power diode laser in critically phase-matched LiB3O5.

    Woll, D; Beier, B; Boller, K J; Wallenstein, R; Hagberg, M; O'Brien, S

    1999-05-15

    Blue 465-nm radiation is generated by frequency doubling of the output of an InGaAs diode-laser oscillator-amplifier system in critically phase-matched LiB(3)O(5) (LBO). The diode-laser system emitted 4 W of single-frequency 930-nm radiation in a near-diffraction-limited beam (M(2)LBO crystal is placed at a resonator internal focus. The frequency doubling in the LBO crystal generates blue radiation at 465 nm with a power of 1 W. The spectral width of the blue radiation is less than 3 MHz, and the value of the M(2) beam parameter is less than 1.2. PMID:18073825

  14. Determination of research reactor safety parameters by reactor calculations

    Main research reactor safety parameters such as power density peaking factors, shutdown margin and temperature reactivity coefficients are treated. Reactor physics explanation of the parameters is given together with their application in safety evaluation performed as part of research reactor operation. Reactor calculations are presented as a method for their determination assuming use of widely available computer codes. (author)

  15. Nuclear reactor internal structures

    The upper internal structures of the reactor are connected to the closing head so as to be readily removed with the latter and a skirt connected to the lower portion of said upper structures so as to surround the latter, extends under the control rods when they are removed from the reactor core. Through such an arrangement the skirt protects the control rods and supports the vessel closing-head and the core upper structures, whenever the head is severed from the vessel and put beside the latter in order to discharge the reactor

  16. Reactor monitoring system

    The present invention concerns a device for monitoring the inside of an FBR type reactor which can not be monitored by a usual optical camera. An ultrasonic camera having an excellent propagating property in a liquid metal sodium is scanned, and reflected waves of the ultrasonic waves are received as signals. The signals are processed by using a virtual realistic feeling (VR) technique such as a head mounting type image display (HMD) and a three dimensional pointing device. With such procedures, the inside of the FBR type reactor can be observed with such a realistic feeling that the inside of the FBR type reactor were seen directly. (I.S.)

  17. First Algerian research reactor

    In 1985, both the Algerian Commissariat of New Energies and the Argentine National Atomic Energy Commission plus the firm INVAP S.E., started a series of mutual visits aimed at defining the mechanisms for cooperation in the nuclear field. Within this framework, a commercial contract was undersigned covering the supply of a low-power reactor (RUN), designed for basic and applied research in the fields of reactor physics and nuclear engineering. The reactor may also be used for performing experiences with neutron beams, for the irradiation of several materials and for the training of technicians, scientists and operators

  18. Course on reactor physics

    In Germany only few students graduate in nuclear technology, therefore the NPP operating companies are forced to develop their own education and training concepts. AREVA NP has started together with the Technical University of Dresden a one-week course ''reactor physics'' that includes the know-how of the nuclear power plant construction company. The Technical University of Dresden has the training reactor AKR-2 that is retrofitted by modern digital instrumentation and control technology that allows the practical training of reactor control.

  19. Fast Breeder Reactor studies

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts

  20. Nuclear reactor theory

    This textbook is composed of two parts. Part 1 'Elements of Nuclear Reactor Theory' is composed of only elements but the main resource for the lecture of nuclear reactor theory, and should be studied as common knowledge. Much space is therefore devoted to the history of nuclear energy production and to nuclear physics, and the material focuses on the principles of energy production in nuclear reactors. However, considering the heavy workload of students, these subjects are presented concisely, allowing students to read quickly through this textbook. (J.P.N.)

  1. PWR type reactor

    From a PWR with a primary circuit, consisting of a reactor pressure vessel, a steam generator and a reactor coolant pump, hot coolant is removed by means of an auxiliary system containing h.p. pumps for feeding water into the primary circuit and being connected with a pipe, originating at the upper part, which has got at least one isolating value. This is done by opening an outlet in a part of the auxiliary system that has got a lower pressure than the reactor vessel. Preferably a water jet pump is used for mixing with the water of the auxiliary system. (orig.)

  2. Reactor de plasma

    Erra Serrabasa, Pilar; Molina Mansilla, Ricardo; Beltrán Serra, Eric

    2008-01-01

    Reactor de plasma. Se trata de un reactor de plasma que puede trabajar en un amplio rango de presión, desde el vacío y presiones reducidas hasta la presión atmosférica y presiones superiores. Adicionalmente el reactor de plasma tiene la capacidad de regular otros parámetros importantes y permite su uso para el tratamiento de muestras de tipología muy diversa, como por ejemplo las de tamaño relativamente grande o de superficie rugosa.

  3. Integral nuclear reactor

    The invention deals with an inprovement of the design of an integral pressurized water nuclear reactor. A typical embodyment of the invention includes a generally cylindrical pressure vessel that is assembled from three segments which are bolted together at transverse joints to form a pressure tight unit that encloses the steam generator and the reactor. The new construction permits primary to secondary coolant heat exchange and improved control rod drive mecanisms which can be exposed for full service access during reactor core refueling, maintenance and inspection

  4. Microfluidic electrochemical reactors

    Nuzzo, Ralph G.; Mitrovski, Svetlana M.

    2011-03-22

    A microfluidic electrochemical reactor includes an electrode and one or more microfluidic channels on the electrode, where the microfluidic channels are covered with a membrane containing a gas permeable polymer. The distance between the electrode and the membrane is less than 500 micrometers. The microfluidic electrochemical reactor can provide for increased reaction rates in electrochemical reactions using a gaseous reactant, as compared to conventional electrochemical cells. Microfluidic electrochemical reactors can be incorporated into devices for applications such as fuel cells, electrochemical analysis, microfluidic actuation, pH gradient formation.

  5. Licensed operating reactors

    The Operating Units Status Report --- Licensed Operating Reactors provides data on the operation of nuclear units as timely and accurately as possible. This information is collected by the Office of Information Resources Management from the Headquarters staff on NRC's Office of Enforcement (OE), from NRC's Regional Offices, and from utilities. The three sections of the report are: monthly highlights and statistics for commercial operating units, and errata from previously reported data; a compilation of detailed information on each unit, provided by NRC's Regional Offices, OE Headquarters and the utilities; and an appendix for miscellaneous information such as spent fuel storage capability, reactor-years of experience and non- power reactors in the US

  6. Joyo experimental reactor tour

    JAEA cooperation in remote monitoring focuses on the Joyo Experimental Reactor at the O'arai Research and Development Center. Joyo performs irradiation of test fuels to support development of the fast reactor cycle in Japan, both in international cooperation and in support of the Monju fast reactor, which is now undergoing reconstruction. The tour included an introduction at the model, a visit to the control room, entry into the containment vessel, and viewing of remote monitoring equipment in the Fresh Fuel Storage and at one of the Spent Fuel Ponds. (author)

  7. Fast Breeder Reactor studies

    Till, C.E.; Chang, Y.I.; Kittel, J.H.; Fauske, H.K.; Lineberry, M.J.; Stevenson, M.G.; Amundson, P.I.; Dance, K.D.

    1980-07-01

    This report is a compilation of Fast Breeder Reactor (FBR) resource documents prepared to provide the technical basis for the US contribution to the International Nuclear Fuel Cycle Evaluation. The eight separate parts deal with the alternative fast breeder reactor fuel cycles in terms of energy demand, resource base, technical potential and current status, safety, proliferation resistance, deployment, and nuclear safeguards. An Annex compares the cost of decommissioning light-water and fast breeder reactors. Separate abstracts are included for each of the parts.

  8. nuclear reactor design calculations

    In this work , the sensitivity of different reactor calculation methods, and the effect of different assumptions and/or approximation are evaluated . A new concept named error map is developed to determine the relative importance of different factors affecting the accuracy of calculations. To achieve this goal a generalized, multigroup, multi dimension code UAR-DEPLETION is developed to calculate the spatial distribution of neutron flux, effective multiplication factor and the spatial composition of a reactor core for a period of time and for specified reactor operating conditions. The code also investigates the fuel management strategies and policies for the entire fuel cycle to meet the constraints of material and operating limitations

  9. Research reactor support

    Research reactors (RRs) have been used in a wide range of applications including nuclear power development, basic physics research, education and training, medical isotope production, geology, industry and other fields. However, many research reactors are fuelled with High Enriched Uranium (HEU), are underutilized and aging, and have significant quantities of spent fuel. HEU inventories (fresh and spent) pose security risks Unavailability of a high-density-reprocessable fuel hinders conversion and limits back-end options and represents a survival dilemma for many RRs. Improvement of interim spent fuel storage is required at some RRs. Many RRs are under-utilized and/or inadequately funded and need to find users for their services, or permanently shut down and eventually decommission. Reluctance to decommission affect both cost and safety (loss of experienced staff ) and many shut down but not decommissioned RR with fresh and/or spent fuel at the sites invoke serious concern. The IAEA's research reactor support helps to ensure that research reactors can be operated efficiently with fuels and targets of lower proliferation and security concern and that operators have appropriate technology and options to manage RR fuel cycle issues, especially on long term interim storage of spent research reactor fuel. Availability of a high-density-reprocessable fuel would expand and improve back end options. The International Atomic Energy Agency provides assistance to Member States to convert research reactors from High Enriched Uranium fuel and targets (for medical isotope production) to qualified Low Enriched Uranium fuel and targets while maintaining reactor performance levels. The assistance includes provision of handbooks and training in the performance of core conversion studies, advice for the procurement of LEU fuel, and expert services for LEU fuel acceptance. The IAEA further provides technical and administrative support for countries considering repatriation of its

  10. Fusion Reactor Materials

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the behaviour of fusion reactor materials and components during and after irradiation. Ongoing projects include: the study of the mechanical behaviour of structural materials under neutron irradiation; the investigation of the characteristics of irradiated first wall material such as beryllium; the detection of abrupt electrical degradation of insulating ceramics under high temperature and neutron irradiation; and the study of dismantling and waste disposal strategy for fusion reactors. Progress and achievements in these areas in 2000 are discussed

  11. International tokamak reactor

    Since 1978, the US, the European Communities, Japan, and the Soviet Union have collaborated on the definition, conceptual design, data base assessment, and analysis of critical technical issues for a tokamak engineering test reactor, called the International Tokamak Reactor (INTOR). During 1985-1986, this activity has been expanded in scope to include evaluation of concept innovations that could significantly improve the tokamak as a commercial reactor. The purposes of this paper are to summarize the present INTOR design concept and to summarize the work on concept innovations

  12. Study of power reactor dynamics by stochastic reactor oscillator method

    Stochastic reactor oscillator and cross correlation method were used for determining reactor dynamics characteristics. Experimental equipment, fast reactor oscillator (BOR-1) was activated by random pulses from the GBS-16 generator. Tape recorder AMPEX-SF-300 and data acquisition tool registered reactor response to perturbations having different frequencies. Reactor response and activation signals were cross correlated by digital computer for different positions of stochastic oscillator and ionization chamber

  13. Research Reactor Benchmarks

    A criticality benchmark experiment performed at the Jozef Stefan Institute TRIGA Mark II research reactor is described. This experiment and its evaluation are given as examples of benchmark experiments at research reactors. For this reason the differences and possible problems compared to other benchmark experiments are particularly emphasized. General guidelines for performing criticality benchmarks in research reactors are given. The criticality benchmark experiment was performed in a normal operating reactor core using commercially available fresh 20% enriched fuel elements containing 12 wt% uranium in uranium-zirconium hydride fuel material. Experimental conditions to minimize experimental errors and to enhance computer modeling accuracy are described. Uncertainties in multiplication factor due to fuel composition and geometry data are analyzed by sensitivity analysis. The simplifications in the benchmark model compared to the actual geometry are evaluated. Sample benchmark calculations with the MCNP and KENO Monte Carlo codes are given

  14. Nuclear reactor fuel assembly

    A fuel assembly construction for liquid metal cooled fast breeder reactors is described in which the sub-assemblies carry a smaller proportion of parasitic material than do conventional sub-assemblies. (U.K.)

  15. Ageing of research reactors

    Historically, many of the research institutions were centred on a research reactor facility as main technological asset and major source of neutrons for research. Important achievements were made in time in these research institutions for development of nuclear materials technology and nuclear safety for nuclear energy. At present, ageing of nuclear research facilities among these research reactors and ageing of staff are considerable factors of reduction of competence in research centres. The safe way of mitigation of this trend deals with ageing management by so called, for power reactors, Plant Life Management and new investments in staff as investments in research, or in future resources of competence. A programmatic approach of ageing of research reactors in correlation with their actual and future utilisation, will be used as a basis for safety evaluation and future spending. (author)

  16. Experience with Kamini reactor

    Kamini is a 233U fuelled, 30 kW(th) research reactor. It is one of the best neutron source facility with a core average flux of 1012 n/cm2/s in IGCAR used for neutron radiography of active and nonradioactive objects, activation analysis and radiation physics research. The core consists of nine plate type fuel elements with a total fuel inventory of 590 g of 233U. Two safety control plates made of cadmium are used for start up and shutdown of the reactor. Three beam tubes, two-thimble irradiation site outside reflector and one irradiation site nearer to the core constitute the testing facilities of Kamini. Kamini attained first criticality on 29th October 96 and nominal power of 30 kW in September 1997. This paper covers the design features of the reactor, irradiation facilities and their utilities and operating experience of the reactor. (author)

  17. Dossier: research reactors

    Research reactors are used at the CEA (the French atomic energy commission) since many years. Their number has been reduced but they remain unique tools that CEA valorize continuously. The results of the programs involving such reactors are of prime importance for the operation of Electricite de France (EdF) park of existing power plants but also for the design of future nuclear power plants and future research reactors. This dossier presents three examples of research reactors in use at the CEA: Osiris and Orphee (CEA-Saclay), devoted to nuclear energy and fundamental research, respectively, and the critical mockups Eole, Minerve and Masurca (CEA-Cadarache) devoted to nuclear data libraries and neutronic calculation. (J.S.)

  18. Nuclear reactor fuel elements

    An improved nuclear power reactor fuel element is described which consists of fuel rods, rod guide tubes and an end plate. The system allows direct access to an end of each fuel rod for inspection purposes. (U.K.)

  19. Reactor power control device

    The present invention concerns a method of controlling reactor power to shift it into a partial power operation upon occurrence of recycling pump tripping or loss of generator load. Operation state of a reactor is classified into a plurality of operation states based on values of the reactor core flow rate and the reactor power. Different insertion patterns for selected control rods are determined on every classified operation states. Then, an insertion pattern corresponding to the operation state upon occurrence of recycling pump tripping or loss of power generator load is carried out to shift into partial power operation. The operation is shifted to a load operation solely in the station while avoiding risks such as TPM scram. Then neutron fluxes are suppressed upon transient to increase margin of fuel integrity. Selected control rod pattern of the optimum reactivity is set to each of operation regions, thereby enabling to conduct flexible countermeasure so as to attain optimum operationability. (N.H.)

  20. Reactor pressure boundary materials

    With a long-term operation of nuclear power plants, the component materials are degraded under severe reactor conditions such as neutron irradiation, high temperature, high pressure and corrosive environment. It is necessary to establish the reliable and practical technologies for improving and developing the component materials and for evaluating the mechanical properties. Especially, it is very important to investigate the technologies for reactor pressure boundary materials such as reactor vessel and pipings in accordance with their critical roles. Therefore, this study was focused on developing and advancing the microstructural/micro-mechanical evaluation technologies, and on evaluating the neutron irradiation characteristics and radiation effects analysis technology of the reactor pressure boundary materials, and also on establishing a basis of nuclear material property database

  1. Reactor BR2. Introduction

    Gubel, P

    2001-04-01

    The BR2 is a materials testing reactor and is still one of SCK-CEN's important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. During the last three years, the availability of the installation was maintained at an average level of 97.6 percent. In the year 2000, the reactor was operated for a total of 104 days at a mean power of 56 MW. In 2000, most irradiation experiments were performed in the CALLISTO PWR loop. The report describes irradiations achieved or under preparation in 2000, including the development of advanced facilities and concept studies for new programmes. An overview of the scientific irradiation programmes as well as of the R and D programme of the BR2 reactor in 2000 is given.

  2. Reactor BR2. Introduction

    Gubel, P

    2002-04-01

    The BR2 materials testing reactor is one of SCK-CEN's most important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. In 2001, the reactor was operated for a total of 123 days at a mean power of 59 MW in order to satisfy the irradiation conditions of the internal and external programmes using mainly the CALLISTO PWR loop. The mean consumption of fresh fuel elements was 5.26 per 1000 MWd. Main achievements in 2001 included the development of a three-dimensional full-scale model of the BR2 reactor for simulation and prediction of irradiation conditions for various experiments; the construction of the FUTURE-MT device designed for the irradiation of fuel plates under representative conditions of geometry, neutron spectrum, heat flux and thermal-hydraulic conditions and the development of in-pile instrumentation and a data acquisition system.

  3. Reactor parameter simulation system

    A reactor parameter simulation system (RPSS) has been built with the capability of analyzing any reactor signals, decomposing those signals into their deterministic and stochastic components, then reconstructing new, simulated signals that possess the same statistical and correlation structure as the original plant variables. Important uses of the RPSS are for integration with reactor simulation software to provide tools for plant control strategy development, and for safety-study investigations of scenarios that can arise involving signal faults generated from degraded sensors. A third use of the RPSS is for frequency-domain filtering of reactor process variables contaminated with serially correlated noise, which is important for our ongoing development of expert systems for sensor-operability surveillance. 5 refs., 4 figs., 3 tabs

  4. Fusion Reactor Materials

    Decreton, M

    2002-04-01

    The objective of SCK-CEN's programme on fusion reactor materials is to contribute to the knowledge on the radiation-induced behaviour of fusion reactor materials and components as well as to help the international community in building the scientific and technical basis needed for the construction of the future reactor. Ongoing projects include: the study of the mechanical and chemical (corrosion) behaviour of structural materials under neutron irradiation and water coolant environment; the investigation of the characteristics of irradiated first wall material such as beryllium; investigations on the management of materials resulting from the dismantling of fusion reactors including waste disposal. Progress and achievements in these areas in 2001 are discussed.

  5. New reactor type proposed

    2003-01-01

    "Russian scientists at the Research Institute of Nuclear Power Engineering in Moscow are hoping to develop a new reactor that will use lead and bismuth as fuel instead of uranium and plutonium" (1/2 page).

  6. Pulsed fusion reactors

    This summer school specialized in examining specific fusion center systems. Papers on scientific feasibility are first presented: confinement of high-beta plasma, liners, plasma focus, compression and heating and the use of high power electron beams for thermonuclear reactors. As for technological feasibility, lectures were on the theta-pinch toroidal reactors, toroidal diffuse pinch, electrical engineering problems in pulsed magnetically confined reactors, neutral gas layer for heat removal, the conceptual design of a series of laser fusion power plants with ''Saturn'', implosion experiments and the problem of the targets, the high brightness lasers for plasma generation, and topping and bottoming cycles. Some problems common to pulsed reactors were examined: energy storage and transfer, thermomechanical and erosion effects in the first wall and blanket, the problems of tritium production, radiation damage and neutron activation in blankets, and the magnetic and inertial confinement

  7. Reactor hot spot analysis

    Vilim, R.B.

    1985-08-01

    The principle methods for performing reactor hot spot analysis are reviewed and examined for potential use in the Applied Physics Division. The semistatistical horizontal method is recommended for future work and is now available as an option in the SE2-ANL core thermal hydraulic code. The semistatistical horizontal method is applied to a small LMR to illustrate the calculation of cladding midwall and fuel centerline hot spot temperatures. The example includes a listing of uncertainties, estimates for their magnitudes, computation of hot spot subfactor values and calculation of two sigma temperatures. A review of the uncertainties that affect liquid metal fast reactors is also presented. It was found that hot spot subfactor magnitudes are strongly dependent on the reactor design and therefore reactor specific details must be carefully studied. 13 refs., 1 fig., 5 tabs.

  8. Reactor BR2. Introduction

    The BR2 is a materials testing reactor and is still one of SCK-CEN's important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. During the last three years, the availability of the installation was maintained at an average level of 97.6 percent. In the year 2000, the reactor was operated for a total of 104 days at a mean power of 56 MW. In 2000, most irradiation experiments were performed in the CALLISTO PWR loop. The report describes irradiations achieved or under preparation in 2000, including the development of advanced facilities and concept studies for new programmes. An overview of the scientific irradiation programmes as well as of the R and D programme of the BR2 reactor in 2000 is given

  9. Reactor Neutrino Spectra

    Hayes, A C

    2016-01-01

    We present a review of the antineutrino spectra emitted from reactors. Knowledge of these and their associated uncertainties are crucial for neutrino oscillation studies. The spectra used to-date have been determined by either conversion of measured electron spectra to antineutrino spectra or by summing over all of the thousands of transitions that makeup the spectra using modern databases as input. The uncertainties in the subdominant corrections to beta-decay plague both methods, and we provide estimates of these uncertainties. Improving on current knowledge of the antineutrino spectra from reactors will require new experiments. Such experiments would also address the so-called reactor neutrino anomaly and the possible origin of the shoulder observed in the antineutrino spectra measured in recent high-statistics reactor neutrino experiments.

  10. Nuclear reactor (1960)

    The first French plutonium-making reactors G1, G2 and G3 built at Marcoule research center are linked to a power plant. The G1 electrical output does not offset the energy needed for operating this reactor. On the contrary, reactors G2 and G3 will each generate a net power of 25 to 30 MW, which will go into the EDF grid. This power is relatively small, but the information obtained from operation is great and will be helpful for starting up the power reactor EDF1, EDF2 and EDF3. The paper describes how, previous to any starting-up operation, the tests performed, especially those concerned with the power plant and the pressure vessel, have helped to bring the commissioning date closer. (author)

  11. Reactor vessel sealing plug

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  12. Future Reactor Experiments

    He, Miao

    2013-01-01

    The measurement of the neutrino mixing angle $\\theta_{13}$ opens a gateway for the next generation experiments to measure the neutrino mass hierarchy and the leptonic CP-violating phase. Future reactor experiments will focus on mass hierarchy determination and the precision measurement of mixing parameters. Mass hierarchy can be determined from the disappearance of reactor electron antineutrinos based on the interference effect of two separated oscillation modes. Relative and absolute measurement techniques have been explored. A proposed experiment JUNO, with a 20 kton liquid scintillator detector of $3%/$$\\sqrt{E(MeV)}$ energy resolution, $\\sim$ 53 km far from reactors of $\\sim$ 36 GW total thermal power, can reach to a sensitivity of $\\Delta\\chi^{2}>16$ considering the spread of reactor cores and uncertainties of the detector response. Three of mixing parameters are expected to be measured to better than 1% precision. There are multiple detector options for JUNO under investigation. The technical challenges...

  13. Reactor fueling of BWR type reactors

    Purpose: To enable the pattern exchange for control rods during burning in Control Cell Core type BWR reactors. Constitution: A plurality of control cells are divided into a plurality of groups such that the control cells is aparted from each other by way of at least two fuel assemblies other than the control cells with respect to the vertical and lateral directions of the reactor core cross section, as well as they are in adjacent with control cells of other groups with respect to the orthogonal direction. This enables to perform the pattern exchange for the control rods during burning in the control cell core with ease, and the control blade and the story effect harmful to the mechanical soundness of fuels can thus be suppressed. (Moriyama, K.)

  14. Reactor Engineering Division annual report

    Research activities in fiscal 1974 in Reactor Engineering Division of eight laboratories and computing center are described. Works in the division are closely related with the development of a multi-purpose High-temperature Gas Cooled Reactor, the development of a Liquid Metal Fast Breeder Reactor in Power Reactor and Nuclear Fuel Development Corporation, and engineering of thermonuclear fusion reactors. They cover nuclear data and group constants, theoretical method and code development, integral experiment and analysis, shielding, heat transfer and fluid dynamics, reactor and nuclear instrumentation, dynamics analysis and control method development, fusion reactor technology and aspects of the computing center. (auth.)

  15. Special lecture on nuclear reactor

    This book gives a special lecture on nuclear reactor, which is divided into two parts. The first part has explanation on nuclear design of nuclear reactor and analysis of core with theories of integral transports, diffusion Nodal, transports Nodal and Monte Carlo skill parallel computer and nuclear calculation and speciality of transmutation reactor. The second part deals with speciality of nuclear reactor and control with nonlinear stabilization of nuclear reactor, nonlinear control of nuclear reactor, neural network and control of nuclear reactor, control theory of observer and analysis method of Adomian.

  16. Future reactor experiments

    The non-zero neutrino mixing angle θ13 has been discovered and precisely measured by the current generation short-baseline reactor neutrino experiments. It opens the gate of measuring the leptonic CP-violating phase and enables the neutrino mass ordering. The JUNO and RENO-50 proposals aim at resolving the neutrino mass ordering using reactors. The experiment design, physics sensitivity, technical challenges as well as the progresses of those two proposed experiments are reviewed in this paper

  17. Water cooled nuclear reactor

    The description is given of a water cooled nuclear reactor comprising a core, cooling water that rises through the core, vertical guide tubes located inside the core and control rods vertically mobile in the guide tubes. In this reactor the cooling water is divided into a first part introduced at the bottom end of the core and rising through it and a second part introduced at the top end of the guide tubes so as to drop in them

  18. Jet-Stirred Reactors

    Herbinet, Olivier; Guillaume, Dayma

    2013-01-01

    The jet-stirred reactor is a type of ideal continuously stirred-tank reactor which is well suited for gas phase kinetic studies. It is mainly used to study the oxidation and the pyrolysis of hydrocarbon and oxygenated fuels. These studies consist in recording the evolution of the conversion of the reactants and of the mole fractions of reaction products as a function of different parameters such as reaction temperature, residence time, pressure and composition of the inlet gas. Gas chromatogr...

  19. Generation IV reactors: economics

    The operating nuclear reactors were built over a short period: no more than 10 years and today their average age rounds 18 years. EDF (French electricity company) plans to renew its reactor park over a far longer period : 30 years from 2020 to 2050. According to EDF this objective implies 3 constraints: 1) a service life of 50 to 60 years for a significant part of the present operating reactors, 2) to be ready to built a generation 3+ unit in 2020 which infers the third constraint: 3) to launch the construction of an EPR (European pressurized reactor) prototype as soon as possible in order to have it operating in 2010. In this scheme, generation 4 reactor will benefit the feedback experience of generation 3 and will take over in 2030. Economic analysis is an important tool that has been used by the generation 4 international forum to select the likely future reactor systems. This analysis is based on 4 independent criteria: the basic construction cost, the construction time, the operation and maintenance costs and the fuel cycle cost. This analysis leads to the evaluation of the global cost of electricity generation and of the total investment required for each of the reactor system. The former defines the economic competitiveness in a de-regulated energy market while the latter is linked to the financial risk taken by the investor. It appears, within the limits of the assumptions and models used, that generation 4 reactors will be characterized by a better competitiveness and an equivalent financial risk when compared with the previous generation. (A.C.)

  20. The replacement research reactor

    The contract for the design, construction and commissioning of the Replacement Research Reactor was signed in July 2000. This was followed by the completion of the detailed design and an application for a construction licence was made in May 2001. This paper will describe the main elements of the design and their relation to the proposed applications of the reactor. The future stages in the project leading to full operation are also described

  1. OECD Halden reactor project

    This report summarizes the activities of the OECD Halden Reactor Project for the year 1976. The main items reported on are: a) the process supervision and control which have focused on core monitoring and control, and operator-process communication; b) the fuel performance and safety behavior which have provided data and analytical descriptions of the thermal, mechanical and chemical behavior of fuel under various operating conditions; c) the reactor operations and d) the administration and finance

  2. Nuclear reactor fuel elements

    A nuclear reactor fuel element comprising a column of vibration compacted fuel which is retained in consolidated condition by a thimble shaped plug. The plug is wedged into gripping engagement with the wall of the sheath by a wedge. The wedge material has a lower coefficient of expansion than the sheath material so that at reactor operating temperature the retainer can relax sufficient to accommodate thermal expansion of the column of fuel. (author)

  3. Small reactor return

    Current state of the development of present-day small reactors in different countries is performed. Various designs of low and middle power reactors, among which are CAREM (25 MW, PWR), KLT-40 (40 MW, PWR), MRX (30 MW, PWR), IRIS (50 MW, PWR), SMART (1000 MW, PWR), Modular SBWR (50 MW, BWR), PBMR (120 MW, HTGR), GT-HMR (285 MW, HTGR), are discussed

  4. Reactor lattice transport calculations

    The present lecture is a continuation of the lecture on Introduction to the Neutron Transport Phenomena. It comprises three aspects of lattice calculations. First the idea of a reactor lattice is introduced. Then the main definitions used in reactor lattice analysis are given, and finally two basic methods applied for solution of the transport equations are defined. Several remarks on secondary results from lattice transport calculations are added. (author)

  5. Thermal or epithermal reactor

    In a thermal or epithermal heavy-water reactor of the pressure tube design the reactivity is to be increased by different means: replacement of the moderator by additional rods with heavy metal in the core or in the reflector; separation of the moderator (heavy water) from the coolant (light water) by means of shroud tubes. In light-water reactor types neutron losses are to be influenced by using the heavy elements in different configurations. (orig./PW)

  6. Department of Reactor Technology

    Risø National Laboratory, Roskilde

    The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included.......The general development of the Department of Reactor Technology at Risø during 1981 is presented, and the activities within the major subject fields are described in some detail. Lists of staff, publications, and computer programs are included....

  7. AVR reactor physics

    A process for reactivity control was developed and used for fuelling the AVR reactor core, which is largely based on experimentally determined values. By adding fuel elements with different quantities of heavy metals paired with various experimental requirements, great demands were made of reactivity control. Although only a small range of control was available, this was sufficient to operate the reactor and to shut it down safely in the required power and temperature range. (orig.)

  8. Future reactor experiments

    Wen, Liangjian

    2015-07-01

    The non-zero neutrino mixing angle θ13 has been discovered and precisely measured by the current generation short-baseline reactor neutrino experiments. It opens the gate of measuring the leptonic CP-violating phase and enables the neutrino mass ordering. The JUNO and RENO-50 proposals aim at resolving the neutrino mass ordering using reactors. The experiment design, physics sensitivity, technical challenges as well as the progresses of those two proposed experiments are reviewed in this paper.

  9. New fission reactor designs

    A number of critical challenges to the expanded or continued use of nuclear power have developed. These can be categorized as: regulatory restrictions and complications; negative public attitudes; plant complexity; plant life, operations, and maintenance; uncertain load growth, financing; waste management. Solutions to these challenges through advanced reactor design centre around four key technical responses. Passive safety systems are being introduced which use the laws of physics to provide emergency reactor coding, control and shutdown thus eliminating the possibility of human error. Modular construction promises cuts in costs and construction time by shifting the major part of component manufacture from the site to the factory. Standardization also cuts capital costs and in addition operations and repair costs and expedites reactor licensing. Improvements to the fuel cycle include improved fuel types, designs and fabrication, and the reprocessing of and recycling spent fuel back into energy production, thus extending uranium resources and offering a partial solution to the problem of waste disposal. Examples of evolutionary and advanced water-cooled reactors, modular high temperature gas-cooled reactors, and advanced liquid metal cooled fast breeder reactors which are being developed round the world are presented. (author)

  10. Emergency reactor scram system

    The present invention provides an emergency reactor scram system capable of shut down a reactor safely upon occurrence of pump trip by improving a passive scram performance for an FBR-type reactor. Namely, a driving motor and an electric generator are connected to a main pump of a primary system. An AC/DC convertor is connected to the electric generator. A shielding plug is disposed to the upper end opening of a reactor container, a control rod drive mechanism is erected on the shielding plug, and an extension pipe is attached to scram magnets of the control rod drive mechanism. The extension pipe is connected to a control rod. The rotation of the shaft of the pump is used as a direct rotator to provide an integrated-type electric generator. The electric generator is electrically connected with the power source of a scram magnet of the emergency scram system. Accordingly, the control rod of the emergency scram system is automatically and rapidly inserted to the reactor core using the power source of the electric generator upon trip of the main pump thereby enabling to scram the reactor safely. (I.S.)